aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* x86: add kernel module for sp5100_tco watchdogChris Blake2017-01-161-0/+15
| | | | | | | | | | | This change adds the sp5100_tco driver as a kernel module for the x86 target. Specifically, this can be used by the PCEngines APU2/APU3. The reason for having this as a kernel module is to allow users to load/unload it on demand, as the I2C interface on the APU2/APU3 will not work while this module is loaded. More info can be found on GitHub at https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Add sp5100_tco AMD patchesChris Blake2017-01-164-0/+217
| | | | | | | | | | | | | | This adds the following patches to the x86 target: sp5100_tco: Add AMD Mullins platform support sp5100_tco: Add AMD Carrizo platform support sp5100_tco: fix the device check for SB800 and later chipsets watchdog: sp5100_tco: properly check for new register layouts With these added, the sp5100_tco driver can then be used on newer AMD platforms, such as the PCEngines APU2/APU3 boards. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: remove the xen_domu subtargetFelix Fietkau2017-01-166-135/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86/generic: add xen DomU supportFelix Fietkau2017-01-163-4/+67
| | | | | | Copy the relevant config options from the xen_domu subtarget Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix up the kernel config for the mikrotik subtargetFelix Fietkau2017-01-161-0/+64
| | | | | | Limit enabled devices to routerboards, disable all other devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix network config for Mikrotik RB411UCezary Jackiewicz2017-01-161-0/+1
| | | | | | | Mikrotik RB411U has only one ethernet port - eth0. This patch allows to create correct config with one lan section. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ar71xx: add support for RB-941-2nDThibaut VARENE2017-01-1611-4/+243
| | | | | | | | | | | | | | | | Add full support for Mikrotik RB-941-2nD (hAP lite) Original patch by Sergey Sergeev <adron@yapic.net> and more information is available here: https://wiki.openwrt.org/toh/mikrotik/rb941_2nd I updated and adapted the patch to apply cleanly to LEDE trunk and added proper numbering for the switch ports (matching case labels). Tested working on actual hardware with the information provided in the above webpage. Sysupgrade works. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove yaffs2 support, it is no longer neededFelix Fietkau2017-01-1656-17333/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* adm5120: mark the rb1xx subtarget as brokenFelix Fietkau2017-01-161-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: convert mikrotik routerboard support to UBIFelix Fietkau2017-01-1613-114/+80
| | | | | | | | | | Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: create a proper default profile for the mikrotik subtarget, drop ↵Felix Fietkau2017-01-162-23/+6
| | | | | | other profiles Signed-off-by: Felix Fietkau <nbd@nbd.name>
* musl: update musl to 1.1.16+ and switch to download from gitChristian Lamparter2017-01-1631-1595/+7
| | | | | | | | | | | | | | | | | | | | | This patch updates musl to 1.1.16+ [0] and removes all the backported patches. This is a major release and tagged as such. For more information visit musl-libc.org or read the WHATSNEW. Furthermore, this patch also changes musl to download directly from git. This makes it easier to update musl in the future. The patch custom Add-format-attribute-to-some-function-declarations.patch was assigned a new 400- number. This should avoid confusion since 0xx numbers are usually assigned to backports. [0] <http://git.musl-libc.org/cgit/musl/commit/?id=769f53598e781ffc89191520f3f8a93cb58db91f> Cc: Hannu Nyman <hannu.nyman@iki.fi> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: Jo-Philipp Wich <jo@mein.io> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* zlib: Update to 1.2.11Daniel Engberg2017-01-161-3/+3
| | | | | | | | Update to 1.2.11 as suggested by upstream Also add SF as primary source and main site as fallback Note: SF doesn't carry the 1.2.11 update yet. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kernel: ar8327/ar8337: disable ARL access code to avoid lockups (FS#384)Jo-Philipp Wich2017-01-161-0/+6
| | | | | | | | | | Running ar8327_get_arl_entry() early after boot leads to MDIO related system lockups on several devices using this driver. Since dumping the ARL table contens is an optional, uncritical feature, simply disable the code for now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* curl: fix HTTPS network timeouts with OpenSSLStijn Segers2017-01-161-0/+36
| | | | | | | | | Backport an upstream change to fix HTTPS timeouts with OpenSSL. Upstream curl bug #1174. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org> [Jo-Philipp Wich: reword commit message, rename patch to 001-*] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: add ARCH_PACKAGES to openwrt_release and os-releaseMatthias Schiffer2017-01-162-0/+2
| | | | | | | | | Knowing the package architecture at runtime can be useful, e.g. to configure opkg repository URLs. The value of ARCH_PACKAGES ("%A" in VERSION_SED) as added to openwrt_release (as DISTRIB_ARCH) and os-release (as LEDE_ARCH). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ubox: turn logd into a separate packageAndrej Vlasic2017-01-162-3/+15
| | | | | | | | Currently system log is always included as a part of ubox. Add logd as a seperate package and add it to default packages list. Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr> Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
* mbedtls: add static files in staging_dirDomagoj Pintaric2017-01-161-0/+1
| | | | | Signed-off-by: Domagoj Pintaric <domagoj.pintaric@sartura.hr> Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
* kernel: make ledtrig-netdev use a work queue for updatesFelix Fietkau2017-01-161-16/+16
| | | | | | | | This fixes hangs in igb that happen if the update call interrupts an already existing dev_get_stats call. In that case the calling CPU deadlocks because it's trying to acquire the same spinlock recursively. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include/feeds.mk: base list of enabled feeds on available instead of ↵Matthias Schiffer2017-01-161-1/+1
| | | | | | | | installed feeds This fixes handling of CONFIG_FEED_* options for uninstalled feeds. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* opkg: use default PKG_BUILD_DIRMatthias Schiffer2017-01-161-1/+0
| | | | | | | opkg doesn't have BUILD_VARIANTs anymore, so the previously defined PKG_BUILD_DIR would lead to a weird 'opkg-' path component. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: brcmfmac: add early (& hacky) patch for storing country codesRafał Miłecki2017-01-161-0/+60
| | | | | | | This allows some basic region switching on Netgear R8000. More devices & codes may be added. Ideally it should be converted into DT info & patch. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: use wiphy_read_of_freq_limits in brcmfmacRafał Miłecki2017-01-151-0/+31
| | | | | | | | This makes use of cfg80211 feature backported & described in 188626f17c09 ("mac80211: backport cfg80211 support for ieee80211-freq-limit DT property"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: add pending BCM5301X patches: Netgear R8000 WiFi & Luxul DTSRafał Miłecki2017-01-154-1/+343
| | | | | | | | This specifies wireless limitations for Netgear R8000 making sure people won't use channels incorrectly (limited performance). There are also 2 new DTS files not used by us yet. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix bcma serial console regressionRafał Miłecki2017-01-151-0/+92
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: refactor ipq8065 device treePavel Kubelun2017-01-151-1124/+2
| | | | | | | | | | | | | | | | At the moment we have 2 seperate device tree sources: 1 for ipq8064 soc located in kernel source and 1 custom in LEDE for ipq8065. ipq8064 and ipq8065 SoCs are completely identical except ipq8065 has higher cpu frequencies and adjusted corresponding power supply. This commit makes ipq8065 DTS to contain only specific for ipq8065 DT entries while pulling all the basic SoC stuff from ipq8064 DTS. It makes easier to manage ipq806x device trees and instead of committing changes into 2 seperate equal DTS we are ending up with only 1. It also enables ipq8065 devices to automatically receive changes made in upstream kernel. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: enable hw pseudo random number generatorPavel Kubelun2017-01-152-1/+17
| | | | | | Enables support for pseudo random number generator in device tree. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: update eMMC and SDCC3 nodes in device treePavel Kubelun2017-01-151-7/+9
| | | | | | | Enable bam dma support for eMMC and SDCC3 in device tree and update nodes to reflect Qualcomm SDK. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: disable usb3 phy suspend and add usb tcsr controlPavel Kubelun2017-01-153-1/+43
| | | | | | | | | According to Qualcomm SDK usb3 phy suspend should be disabled for ipq806x. This may solve issue on some ipq806x devices that breaks usb3 storage peripherals during system boot. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ramips: add back the i2c-mt7621 moduleJohn Crispin2017-01-151-0/+16
| | | | | | mt7628/88 are still using this module. Signed-off-by: John Crispin <john@phrozen.org>
* mt76: select 802.11w supportStijn Tintel2017-01-151-1/+3
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Felix Fietkau <nbd@nbd.name>
* ramips: Added Onion Omega2 and Omega2+Lazar Demin2017-01-158-0/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Onion Omega2 and Omega2+ (https://onion.io) Specifications: - SoC: MediaTek MT7688AN (580MHz, ramips) - Omega2 - RAM: 64MB DDR - Storage: 16MB NOR SPI flash onboard - Omega2+ - RAM: 128MB DDR - Storage: 32MB NOR SPI flash onboard + microSD slot - Wireless: Built into MT7688AN (mt76) with onboard 1x chip antenna and u.FL connecter - Ethernet: 1x100M pins on Omega2 & Omega2+, can use Ethernet Expansion and an Omega Dock to get a physical Ethernet port - Strongly recommend using the Omega2 & Omega2+ with a Dock (Expansion Dock, Power Dock, Arduino Dock 2, Mini Dock) - All Docks Provide: - Micro-USB port to provide power to the Omega - On the Expansion and Mini Docks, can also access the terminal (UART0) via serial - USB 2.0 socket connected to Omega - Just the Expansion Dock, Power Dock, and Arduino Dock 2 provide: - Omega GPIO breakout - Allows for connection of Omega Expansions: - Ethernet Expansion - Relay Expansion - PWM Expansion - OLED Expansion - Ethernet Expansion - Proto Expansion - Cellular Expansion Signed-off-by: Lazar Demin <lazar@onion.io>
* kernel: can: Add missing regmap dependency for kernel 4.4Florian Fainelli2017-01-151-1/+1
| | | | | | | Fixes build failure for kmod-can-c-can-platform which depends on kmod-regmap for kernel 4.1 and 4.4. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ar71xx: Detect USB port on Mikrotik RB750UPJoão Chaínho2017-01-151-0/+3
| | | | | | The USB port on Mikrotik RB750UP isn’t detected. This patch provides a fix. Tested and working. Signed-off-by: João Chaínho <joaochainho@gmail.com>
* ramips: Add I2C driver to the default kernel configRosen Penev2017-01-153-23/+7
| | | | | | | | | | I made a commit that added the RTC driver to the kernel config with the intent that it would fix hctosys. Unfortunately while the RTC driver is in there, it's connected through I2C, the driver for which comes in module form and is thus loaded late. After this commit, it works fine. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* imx6: kernel: Backport serial port fixesPetr Štetiar2017-01-154-0/+249
| | | | Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: backport MIPS changes introducing a separate IRQ stackFelix Fietkau2017-01-1517-15/+312
| | | | | | | | Prevents crashes when IRQs arrive when the current kernel stack context already contains deeply nested function calls, e.g. when stacking lots of network devices on top of each other Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gitignore: add /overlayMatthias Schiffer2017-01-151-0/+1
| | | | | | | Similar to /files, /overlay is only useful for modifications not tracked in the LEDE repository itself. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ath10k-firmware: Update QCA988X firmware to latest versionTimo Sigurdsson2017-01-151-4/+4
| | | | | | | | | | This patch updates the QCA988X firmware to the latest revision firmware-5.bin_10.2.4-1.0-00016 found in the official ath10k-firmware repository. Tested on TP-Link Archer C7 v2. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
* hostapd: fix passing jobserver to hostapd/supplicant build processesFelix Fietkau2017-01-151-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: backport a few upstream fixesFelix Fietkau2017-01-155-4/+163
| | | | | | | | Fixes reassoc issues with WDS mode Fixes reassoc issues in AP mode Fixes IBSS reauthentication issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, adds support for 802.11wFelix Fietkau2017-01-151-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ncurses: revert $(STAGING_DIR_HOSTPKG) to $(STAGING_DIR)/host where appropriateMatthias Schiffer2017-01-141-1/+1
| | | | | | | Host files installed in Build/InstallDev are target-specific and will stay in $(STAGING_DIR)/host after the STAGING_DIR_HOSTPKG unification. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/autotools.mk: use STAGING_DIR_HOSTPKG where appropriateMatthias Schiffer2017-01-141-2/+2
| | | | | | | Make sure binaries install to STAGING_DIR_HOSTPKG are still found when this variable is eventually modified. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: backport a fix for a tx related race conditionFelix Fietkau2017-01-141-0/+107
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refresh patchesFelix Fietkau2017-01-148-109/+123
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport some upstream fixesKoen Vandeputte2017-01-143-0/+200
| | | | | | | | | | | | Backports the following upstream fixes: mac80211: initialize fast-xmit 'info' later mac80211: fix legacy and invalid rx-rate report mac80211: fix tid_agg_rx NULL dereference Compiled and tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: update 4.4 kernel to 4.4.42Hauke Mehrtens2017-01-1341-98/+108
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imagebuilder: remove existing debug kernel imageFelix Fietkau2017-01-131-0/+1
| | | | | | Reduces tarball size and improves build time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imagebuilder: remove existing root filesystem imagesFelix Fietkau2017-01-131-0/+1
| | | | | | Reduces tarball size and improves build time Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 16:12:13 +0000