aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* busybox: nslookup_lede: fix compatibility with v1.25Jo-Philipp Wich2017-04-272-6/+7
| | | | | | | | | | | | | | The ":*" optstring syntax was only recently introduced with BusyBox v1.26, older versions need a corresponding hint in the "opt_complementary" variable to denote flag values that should be stored as llist entries. Add the required opt_complementary entry to fix random SIGBUS, SIGILL or SIGSEGV related crashes on BusyBox 1.25.x when attempting to use the "-q" flag of the "nslookup_lede" applet. Ref: https://forum.lede-project.org/t/nslookup-ipv6-in-lede-17-01-1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix syntax error in board.d/01_ledsMathias Kresin2017-04-271-1/+1
| | | | | | | | | | Fixes the following error: syntax error: unexpected newline (expecting ")") Fixes: FS#739 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: ZBT-WE826: include the correct dtsiMathias Kresin2017-04-273-6/+4
| | | | | | | | | Fix a copy/paste error and include the ZBT-WE826 dtsi instead of the ZBT-WG3526 one. Fix the syntax error in the ZBT-WE826 dtsi to prevent an compile error. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dropbear: fix procd interface trigger installHans Dedecker2017-04-261-1/+3
| | | | | | | | Install procd interface triggers only for interfaces which are enabled so dropbear instances running on (an) enabled interface(s) are not restarted due to an interface trigger of an interface which is disabled. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* busybox: Enable sendfile by defaultDaniel Engberg2017-04-261-1/+1
| | | | | | Enable sendfile system call by default. http://lists.busybox.net/pipermail/busybox-cvs/2014-November/034831.html Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* include/packages-defaults.mk: Remove LARGEFILE optionDaniel Engberg2017-04-261-1/+0
| | | | | Remove LARGEFILE option, support was removed back in 2011 (OpenWrt rev 25208). Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* imx6: ventana: add GW553x board identificationTim Harvey2017-04-261-0/+5
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: disable MSI interruptsTim Harvey2017-04-262-40/+24
| | | | | | | | | | | | The IMX6 PCIe host controller does not fire legacy interrupts if MSI is enabled. A patch is being worked on to enable MSI at runtime only when it is needed but meanwhile this patch will disable MSI for the imx6 kernel. This fixes the no interrupt issue on cards/drivers that use legacy interrupts such as ath9k. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: apply upstream mmc fix for DDR50 cards on UHS-I capable boardsTim Harvey2017-04-261-0/+42
| | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git/commit/?h=fixes&id=9f327845358d3dd0d8a5a7a5436b0aa5c432e757 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* build: fix symlinked .config handlingSergey Ryazanov2017-04-261-1/+1
| | | | | | | | | | | | | | | | | | When running "make menuconfig" with symlinked .config (e.g. to env/.config) it renames symlink to .config.old, creates new .config file and writes updated configuration here. This breaks the desired workflow when changes in the configuration could be checked using "scripts/env diff" and commited with "scripts/env save". Since the env/.config file is not updated. Fix this issue by exporting KCONFIG_OVERWRITECONFIG=1, which forces mconf to overwrite the .config content, instead of renaming it and creating a new file. This variable is set only if .config is a symlink, otherwise the variable is not exported and the old behaviour is preserved. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* apm821xx: Merge the Cisco Meraki MX60 & MX60WChris Blake2017-04-261-7/+1
| | | | | | | | | Both of these boards share the same DTS, and hardware. The only difference would be the PCI-E slot, and ath9k card found on the MX60W. Due to the similarities, it would be more efficient to merge these profiles. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* apm821xx: Add default packages to NAND targetChris Blake2017-04-263-8/+9
| | | | | | | | | This moves core router packages to the NAND target, to ensure they are applied to all images. This change is being done due to an issue found when flashing the MX60W image, which came without these when built as a multi image. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: fold 641-MIPS-ath79-fix-AR934x-OTP-offsets.patch into the patch that ↵Felix Fietkau2017-04-2615-131/+91
| | | | | | it fixes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Backport AR934x OTP PatchChris Blake2017-04-261-0/+42
| | | | | | | | | Merged upstream in https://patchwork.kernel.org/patch/9572541/, this patch fixes the OTP offset used by the AR934x and AR955X to properly enable reading from the OTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: Add OTP support for AR934xChris Blake2017-04-261-0/+66
| | | | | | | | | | The patch 523-MIPS-ath79-OTP-support only supports the OTP offsets for AR933x chips, which has changed on newer platforms such as the AR934x. The follwoing change is to add support for reading the OTP on the AR934x. Tested on an Aerohive AP-121. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* tools: host/include/getline.h: RemoveRosen Penev2017-04-262-73/+1
| | | | | | Seems to be useful only for old and unsupported operating systems. Removed and adjusted the mtd-utils Makefile. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: remove out of tree direct-io disable hackFelix Fietkau2017-04-2611-256/+1
| | | | | | | Direct-IO support has to be enabled for the release build anyway, so this hack is not worth keeping Signed-off-by: Felix Fietkau <nbd@nbd.name>
* utils/mdadm: Update to 4.0Daniel Engberg2017-04-265-31/+53
| | | | | | | | | | | Update mdadm to 4.0 Remove 000-compile.patch as it's fixed upstream Refresh patches Add mdadm.h-Undefine-dprintf-before-redefining.patch Source: http://git.openembedded.org/openembedded-core/tree/meta/recipes-extended/mdadm/files Add RAID 0,1 and 10 as depends to make mdadm usable. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ramips: use the ZBT-WE826 power LED for status indicationMathias Kresin2017-04-252-2/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add ZBT-WE826 32MB variantMathias Kresin2017-04-259-19/+57
| | | | | | | | The ZBT-WG826 is available with 16 or 32 MByte of flash. Split the device tree source file, rename the currently supported 16 MByte version and add the 32 MByte variant. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: rename Digineo AC1200 Pro to ZBT-WG3526 32MBMathias Kresin2017-04-258-29/+23
| | | | | | | | The Digineo AC1200 Pro is the 32MB flash variant of the ZBT-WG3526 with unpopulated/exposed sdhci slot. Rename to board to the OEM/ODM name and add the sdhci kernel module to use it for multiple clones. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: prepare ZBT-WG3526 for hardware variantsMathias Kresin2017-04-256-11/+14
| | | | | | | | The ZBT-WG3526 is available with 16 or 32 MByte of flash. Rename the current supported 16MByte version to indicate which flash size variant is supported. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for ZBT-WE1326Jiawei Wang2017-04-255-0/+120
| | | | | | | | | | | | | | | | | | | Specification: - SoC: MT7621AT, MT7603EN and MT7612EN - Flash: 16 MiB (W25Q128FVSG) - RAM: 512 MiB (EM6GE16EWXD-12H) - Ethernet: 1 x WAN (10/100/1000Mbps) and 4 x LAN (10/100/1000 Mbps) - Others: USB 2.0, micro SD slot, reset button and 8 x LEDs Issues: - Two LEDs for 2.4 GHz and 5 GHz Wi-Fi do not work, can't find GPIOs. - The pwr LED is not GPIO controllable How to install: - The original firmware is OpenWrt, so both LuCI or sysupgrade can be used. - Do not keep settings, for sysupgrade please use the -n option. Signed-off-by: Jiawei Wang <buaawjw@gmail.com>
* ramips: fix ZyXEL Keenetic Omni/Omni II GPIOsAlexey Belyaev2017-04-252-6/+22
| | | | | | | Each GPIO bank has only 24 gpios. Use and enable the correct banks for GPIOs > 24. Signed-off-by: Alexey Belyaev <spider@spider.vc>
* ramips: fix ZyXEL Keenetic Omni switch configAlexey Belyaev2017-04-252-2/+2
| | | | | | | The wan port is connected to switch port 0. Fix the mediatek,portmap as well as the default switch config. Signed-off-by: Alexey Belyaev <spider@spider.vc>
* lantiq: DGN3500: make switch LEDs blink on activityKevin Darbyshire-Bryant2017-04-251-0/+15
| | | | | | | | | | | | | | | | | Make switch port LEDs blink on activity as they do with stock firmware. The u-boot loader sets suitable values in the LED control register that unfortunately get blown away by the linux switch driver init. Restore that value by using driver 'initvals'. 0x0431 is the led control register, the value 0x0960. Each nybble represents each LED's mode (LED3,2,1,0) in this case OFF, 1000LINK+Activity, 100/10LINK+Activity, OFF. Only LED1&2 are physically present. Enabling the blinkenlights exposed the fact that an RRCP packet was being emitted by the switch on all ports every second. Further initvals copied from stock firmware's u-boot driver disabled this 'feature'. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* generic: rtl8366rb: add support for initvals from DTSKevin Darbyshire-Bryant2017-04-251-0/+25
| | | | | | | | | Allow per-device initvals in the DTS file for rlt8366rb switches. Shamelessly copies 30494598f891fc4436a49eca55fc31d03c087841 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* netifd: return error status in reload_serviceHans Dedecker2017-04-241-1/+4
| | | | | | | | Based on a patch by Alexandru Ardelean. netifd ubus reload call returns the actual reload error status; return error status as well in reload_service Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to git HEAD versionHans Dedecker2017-04-241-3/+3
| | | | | | | | | 11cb9cf ubus: add interface method to trigger renew event 4375d1b system-linux: allow "throw" route type 5fbd904 netifd: propagate error code on netifd_reload() 6e0acec interface-ip: fix device name for IPv6 link-local DNS server Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: update to git HEAD versionHans Dedecker2017-04-241-3/+3
| | | | | | | 570069d ubus: rework dumping IPv6 and IPv4 leases 4e579c4 dhcpv6-ia: simplify logic to write statefile and dhcpv6 logging Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* omap: rework image generation and profilesAlexander Couzens2017-04-246-44/+104
| | | | | | | | | Migrate to new image generation and introduce sdcard generation (based on sunxi). Profile now generated via image/Makefile instead of profiles/ directory. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: add am335x_boneblackAlexander Couzens2017-04-241-1/+6
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: add default uEnv to boot via mmc cardAlexander Couzens2017-04-242-0/+10
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: re-introduce patches dropped by update to v2017.01Alexander Couzens2017-04-243-0/+85
| | | | | | | The beagleboard doesn't boot with Thumb enabled, but without Thumb the SPL (first stage bootloader) is too big to fit into SRAM. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: install image to STAGING_DIR_IMAGEAlexander Couzens2017-04-241-0/+5
| | | | | | to use them later by image/Makefile to create full working sdcard images Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: assign BUILD_DEVICES most boardsAlexander Couzens2017-04-241-1/+3
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* omap: correct CPU_TYPE: omaps are cortext-a8Alexander Couzens2017-04-241-1/+1
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* omap/Kconfig: refresh by oldconfigAlexander Couzens2017-04-241-2/+3
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* omap/Kconfig: add usb optionsAlexander Couzens2017-04-241-5/+5
| | | | | | including phy and required dma options Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* omap/Kconfig: enable SMPAlexander Couzens2017-04-241-3/+15
| | | | | | the pandaboard is a multicore omap Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* omap/Kconfig: add omap2plus_cpufreqAlexander Couzens2017-04-241-1/+1
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* mac80211: rt2x00: add incomplete support for external PA on MT7620Daniel Golle2017-04-241-0/+125
| | | | | | | | | | | | | | Do as the vendor driver does -- however, some devices apparently patched support for external PA into the driver similar to how it was done on Rt3352, using EEPROM_NIC_CONF1 rather than EEPROM_NIC_CONF2, hence we check for both fields. Somehow the vendor driver also no longer offers the option of only one of the TX paths having an external PA (which was probably to weird to ever be implemented in practise, though it doesn't seem like a particularly bad idea to me). Do the same in rt2x00 and enable support for external PA on both TX paths whenever it is set for TX0 in EEPROM. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: reorder patches and prepare for MT7620 external PADaniel Golle2017-04-245-0/+128
| | | | | | | | | Import change to make external PA capability consistent with the vendor driver instead of having the logic inverted. While at it, apply patches in the same order as they got merged upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix sysupgrade board detectionJohn Crispin2017-04-242-5/+10
| | | | | | | boardnames were changed with the recent target update. the sysupgrade board detection was not updated properly. Signed-off-by: John Crispin <john@phrozen.org>
* include/image.mk: allow passing a compat string to the NAND image templateJohn Crispin2017-04-241-5/+6
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: add support for the NAND-ePHY boardJohn Crispin2017-04-244-2/+538
| | | | | | This is the same as the NAND board but gmac1 is wired to an external phy. Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: add DSA multi cpu port supportJohn Crispin2017-04-242-0/+351
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: fix support for gmac1 using external PHYJohn Crispin2017-04-244-2/+115
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq8064: fix dwc3-of-simple module unloading for Netgear R7500Thomas Reifferscheid2017-04-242-14/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without patch unloading the dwc3-of-simple module went stuck after successfully removing hcd.1 during the hcd.0 removal: root@LEDE:/# rmmod dwc3-of-simple [ 21.391846] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 21.391931] usb usb4: USB disconnect, device number 1 [ 21.397038] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 21.401111] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 21.406685] usb usb3: USB disconnect, device number 1 [ 21.412848] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 21.417248] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 21.422521] usb usb2: USB disconnect, device number 1 followed by nothing. Sometimes a stall CPU was detected, or a kernel panic, or a reboot occurred after a couple of minutes. At the same time unloading the dwc3 module followed by dwc3-of-simple module was working repeatedly. root@LEDE:/# rmmod dwc3 [ 53.827328] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 53.827412] usb usb4: USB disconnect, device number 1 [ 53.832630] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 53.836452] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 53.842314] usb usb3: USB disconnect, device number 1 [ 53.848412] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 53.852542] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 53.857882] usb usb2: USB disconnect, device number 1 [ 53.863956] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 53.867875] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 53.873696] usb usb1: USB disconnect, device number 1 [ 53.879742] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered root@LEDE:/# rmmod dwc3-of-simple root@LEDE:/# For the non-working case, the code was stuck in a readl() in http://lxr.free-electrons.com/source/drivers/usb/host/xhci.c#L91 because http://lxr.free-electrons.com/source/drivers/usb/dwc3/dwc3-of-simple.c#L126 was disabling the wrong clocks when removing hcd.1 (it was disabling the clock of hcd.0). That's why the readl() went stuck when removing hcd.0 The patch however addresses the clock assignment from the Netgear R7500 dts file and backs off the previous attempt. Now unloading and repeated module loading is working just fine. root@LEDE:/# rmmod dwc3-of-simple [ 24.089679] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 24.089765] usb usb4: USB disconnect, device number 1 [ 24.094856] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 24.098963] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 24.104522] usb usb3: USB disconnect, device number 1 [ 24.111194] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 24.115086] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 24.120396] usb usb2: USB disconnect, device number 1 [ 24.126503] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 24.130347] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 24.135948] usb usb1: USB disconnect, device number 1 [ 24.142085] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered root@LEDE:/# Fixes: dwc3-of-simple module unloading for Netgear R7500 Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* ipq8064: Fix dwc3 module unloadingThomas Reifferscheid2017-04-241-3/+11
| | | | | | | | | | The patch follows the qualcomm code comments setting SSUSB_CTRL_TEST_POWERDOWN to 0x1 and is testing and clearing the bit during USB superspeed PHY init. According to Andy Gross it needs to be BIT(26). Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org> Acked-by: Andy Gross <andy.gross@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 20:58:52 +0000