aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: fix gigabit link pll-data for EX7300Daniel Gimpelevich2019-10-211-2/+2
| | | | | | | | | | | | | The device did not appear to be reachable unless the connection were forced to 100Mb or lower. Revert to previously working pll-data. Also fix the phy-mode to represent the actual state needed for ethernet to function. Reported-by: Moritz Schreiber <moritz@mosos.de> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [add remark about phy-mode property] Signed-off-by: David Bauer <mail@david-bauer.net>
* libpcap: build with cmakeYousong Zhou2019-10-214-298/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | The main motivation is to drop and stop maintaining "100-debian_shared_lib.patch". It lacks the logic to include custom implementation of several functions like pcap_strlcpy() which can cause build failures when glibc is used [2] CAN and CAN-USB support related symbols are now handled by general linux support, see [1] "-ffunction-sections -fdata-sections" were removed as they should help much for shared libraries Size comparison before and after the change -rw-r--r-- 1 yunion yunion 238042 Oct 18 11:42 ipkg-x86_64/libpcap/usr/lib/libpcap.so.1 lrwxrwxrwx 1 yunion yunion 16 Oct 18 13:03 ipkg-x86_64/libpcap/usr/lib/libpcap.so.1 -> libpcap.so.1.9.1 -rwxr-xr-x 1 yunion yunion 229867 Oct 18 13:03 ipkg-x86_64/libpcap/usr/lib/libpcap.so.1.9.1 [1] On Linux, handle all CAN captures with pcap-linux.c, in cooked mode, https://github.com/the-tcpdump-group/libpcap/commit/93ca5ff7030aaf1219e1de05ec89a68384bfc50b [2] https://github.com/openwrt/packages/issues/10270 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ath79: add AR934x NAND Flash Controller driverMichal Cieslakiewicz2019-10-204-0/+1525
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains updated driver for Atheros NAND Flash Controller written originally by Gabor Juhos for ar71xx (aka 'ar934x-nfc'). ath79 version has adapted to work with kernel 4.19 and Device Tree. It has also been renamed to 'ar934x-nand' to avoid confusion with Near-Field Communication technology. Controller is present on Atheros AR934x SoCs and required for accessing internal flash storage on routers like Netgear WNDR4300. This port preserves all NAND programming code while moving platform configuration to Device Tree and replacing some kernel functions marked for retirement by 4.19. Suitable definition is included in 'ar934x.dtsi' ('nand@1b000200' section). Most important changes to ar71xx version are: * old kernel sections of code removed * 'bool swap_dma' provided by platform data is now set by boolean DT property 'qca,nand-swap-dma' * board-supplied (mach-*.c code) platform data removed - its elements become either unused, redundant or replaced by DT methods (like reset) * IRQ is reserved by devm_request_irq() so free_irq() is not needed anymore * calls to deprecated nand_scan_ident() + nand_scan_tail() function pair replaced by using recommended nand_scan() with attach_chip() callback * ECC is set to hardware by default, can be overriden by standard DT 'nand-ecc-*' properties (software Hamming or BCH are other options) This driver has been successfully tested on Netgear WNDR4300 running experimental ath79 OpenWrt master branch. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> [add reset control] Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: essedma: Fix dead lockMasafumi UTSUGI2019-10-202-4/+4
| | | | | | | | | | | | | | | | | edma_read_append_stats() gets called from two places in the driver. The first place is the kernel timer that periodically updates the statistics, so nothing gets lost due to overflows. The second one it's part of the userspace ethtool ioctl handler to provide up-to-date values. For this configuration, the use of spin_lock() is not sufficient and as per: <https://mirrors.edge.kernel.org/pub/linux/kernel/people/rusty/kernel-locking/c214.html> the locking has to be upgraded to spin_lock_bh(). Signed-off-by: Masafumi UTSUGI <mutsugi@allied-telesis.co.jp> [folded patch into 710-, rewrote message] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: Clean up GL-AR300M DTS/DTSI inclusionsJeff Kletsky2019-10-202-4/+1
| | | | | | | | | | | | Modify GL-AR300M-Lite and GL-AR300M (NOR): * Include qca9531_glinet_gl-ar300m.dtsi directly rather than qca9531_glinet_gl-ar300m-nor.dts * Remove redundant inclusion of gpio.h and input.h Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* openssl: Add engine configuration to openssl.cnfEneas U de Queiroz2019-10-202-1/+57
| | | | | | | | | | | This adds engine configuration sections to openssl.cnf, with a commented list of engines. To enable an engine, all you have to do is uncomment the engine line. It also adds some useful comments to the devcrypto engine configuration section. Other engines currently don't have configuration commands. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* strace: update to version 5.3Josef Schlehofer2019-10-201-9/+8
| | | | | | | | | | | | Makefile changes: - moves PKG_MAINTAINER above PKG_LICENSE - Change PKG_LICENSE to LGPL-2.1-or-later and correct PKG_LICENSE_FILES - changes URL to a more appropriate one, which uses HTTPS - adds 2 spaces as an indentation in description Compile and run tested on Turris Omnia, mvebu Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: Fix arm64 include filesHauke Mehrtens2019-10-201-0/+280
| | | | | | | | | | | | | | | | | This patch fixes the build of gdb and strace on arm64 targets with kernel 4.19. Without this patch asm/ptrace.h is including asm/sigcontext.h and this file defines some structures which are also defined in musl header file arch/aarch64/bits/signal.h. These two definitions then conflict with each other and make the build fail. This was seen locally and also by the build bot. The struct sigcontext, struct sve_context and some others were defined twice. It looks like this problem was introduced between 4.14 and 4.19 and it was fixed in 5.0. I already requested to backport this patch to kernel 4.19. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath25: split up DEVICE_TITLEMoritz Warning2019-10-191-1/+2
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* mvebu: split up DEVICE_TITLEMoritz Warning2019-10-193-27/+90
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* mediatek: split up DEVICE_TITLEMoritz Warning2019-10-192-5/+11
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* octeon: split up remaining DEVICE_TITLEMoritz Warning2019-10-191-1/+2
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR and DEVICE_MODEL Signed-off-by: Moritz Warning <moritzwarning@web.de>
* at91: split up remaining DEVICE_TITLE definitionsMoritz Warning2019-10-191-6/+12
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* rb532: split up DEVICE_TITLEMoritz Warning2019-10-191-1/+2
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* tplink-safeloader: fix compilation warningsIlya Gordeev2019-10-191-12/+13
| | | | Signed-off-by: Ilya Gordeev <Mirraz@users.noreply.github.com>
* kernel: layerscape: fix compilation errorBiwen Li2019-10-191-0/+28
| | | | | | | | | This fixes a compilation error as follows: drivers/staging/fsl_qbman/qman_config.c:815:29: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] if ((qman_ip_rev & 0xFF00) == QMAN_REV31) { Signed-off-by: Biwen Li <biwen.li@nxp.com>
* bzip2: add linker option LDFLAGSleo chung2019-10-191-0/+11
| | | | | | | | | | if gcc not linker whith this LDFLAGS, "file libbz2.so.1.0.8" will recognize as pie executable ELF file ( which should be shared object). this because the file command version before 5.36 not recognize correctly. Signed-off-by: leo chung <gewalalb@gmail.com>
* kernel: add package for Epson RX-8025 and compatible I2C RTCMathew McBride2019-10-191-0/+17
| | | | | | | RX-8025 is an I2C RTC from Epson, some newer products such as the RX-8035 are also compatible. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* mac80211: Update to version 5.4-rc2Hauke Mehrtens2019-10-1958-2580/+190
| | | | | | | | | This updates mac80211 to backports based on kernel 5.4-rc2 ath10k-ct was updated to match the API changes and iw now uses the new nl80211.h header file. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.3.6Hauke Mehrtens2019-10-1911-280/+23
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq806x: WPQ864: fix partition unit-addressChristian Lamparter2019-10-181-1/+1
| | | | | | | This patch fixes what seems to be a simple copy & paste error with the unit-address of the BOOTCONFIG partition. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* build: fix seq host tool checkJo-Philipp Wich2019-10-181-2/+2
| | | | | | | | | | Problem found on alpine linux when trying to `./scripts/feeds update -a`, which results in `Build dependency: Missing seq command`. Ref: https://github.com/openwrt/openwrt/pull/1926 Suggested-by: imShara <shara@protonmail.com> [reworded commit and turned faulty Sob into Suggested-by] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wwan: Double quote to prevent globbing and word splittingFlorian Eckert2019-10-182-9/+9
| | | | | | | | Fix some shellcheck warnings. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wwan: add ec25 to databaseFlorian Eckert2019-10-182-1/+5
| | | | | | | | Add ec25 to database. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wwan: add mc7304 to databaseFlorian Eckert2019-10-182-1/+5
| | | | | | | | Add mc7304 to database. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wwan: check new uci bus option on proto setup eventFlorian Eckert2019-10-182-13/+40
| | | | | | | | | | | | | | | If system has more then one and different wwan interface (modem). Then the wwan protohandler will always take the modem which is discovered first. The protohandler will always setup the same interface. To fix this add a new usb "bus" option which is associated with wwan device and so will set the specified interface up. With this change more then one interface could be mananged by the wwan protohandler. If the "bus" option is not set in the uci network config then the protohandler behaves as before the change. The protohanldler will take the first interface which he founds. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* procd: allow usage of * as procd_running() instance parameterAlin Nastac2019-10-182-4/+4
| | | | | | | | | | | service_running() implementation in /etc/rc.common use it. It is preferable to use wildcard than assuming the instance name is the default one. jsonfilter returns all matches when wildcards are used, hence the -l 1 argument used to limit output to only one value. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* util-linux: add more commandLucian Cristian2019-10-181-1/+16
| | | | | | at least vtysh needs it for proper listing, busybox is not modular so add it here Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* 6in4: add rfc1918 check functionSean Kenny2019-10-181-0/+19
| | | | | | | | | | | | | | | | | | | | | | | This is a precursor to adding proper support for multiple 6in4 tunnels with the already programmed tunlink parameter. This is an essential sanity check so as to not break existing and working behind NAT setups. Signed-off-by: Sean Kenny <skenny@wfap.ca> 6in4: add myip he.net api parameter logic This is to add proper support for multiple 6in4 tunnels with the already programmed tunlink parameter. As it stands before this commit, if there is a multi wan setup that consists of dynamic ips, there is no way to use the dynamic update feature as the he.net api is implicitly using the ip address of the caller. This will explicitly use the ipaddr specified in the interface config OR the ip of the tunlink interface specified in the dynamic update api call instead ONLY if the final resolved ipaddr variable is not an rfc1918 address. Signed-off-by: Sean Kenny <skenny@wfap.ca>
* lua: install luac symlink on hostAlin Nastac2019-10-181-0/+1
| | | | Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* lantiq: Fix fw_cutter LzmaWrapperChristian Franke2019-10-181-1/+1
| | | | | | | The destination buffer size `d_len` is passed to `lzma_inflate` as a pointer. Therefore, it needs to be dereferenced to compare its content. Signed-off-by: Christian Franke <nobody@nowhere.ws>
* kernel: fix MBIM descriptionBjørn Mork2019-10-171-1/+1
| | | | Signed-off-by: Bjørn Mork <bjorn@mork.no>
* fwtool: do not omit final 16 byte when image does not contain signatureJo-Philipp Wich2019-10-172-2/+4
| | | | | | | | | | | | | | | | | | The fwutil command will interpret the final 16 byte of a given firmware image files as "struct fwimage_trailer". In case these bytes do look like a valid trailer, we must ensure that we print them out along with the remainder of the image to not accidentally truncate non-trailer-images by 16 bytes when they're piped through fwtool, e.g. as part of an image verification command sequence. Some command sequences pipe images through fwtool in order to strip any possible metadata, certificate or signature trailers and do not expect bare images without any of that metadata to get truncated as other non- fwtool specific metadata is expected at the end of the file, e.g. an information block with an md5sum in case of the combined image format. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: add buildinfo as single Makefile targetPaul Spooren2019-10-171-1/+4
| | | | | | | | | | | | | | | | The prepare target was added some 11 years ago to build tools and toolchain and was recently extended to create buildinfo files for reproducibility, meaning {feeds,version,config}.buildinfo. As the buildbot workflow is more complex than the single prepare (kmod feed insertion), prepare is only used to create those buildinfo files. Running prepare however runs `target/compile` as well, taking time even everything is already compiled. Splitting this allows the buildbot to run only the `buildinfo` target while others can still use the convenience feature `prepare`. Signed-off-by: Paul Spooren <mail@aparcar.org>
* wireguard: bump to latest snapshot 20191012Kevin Darbyshire-Bryant2019-10-161-2/+2
| | | | | | | | | | | 8eb8443 version: bump snapshot be09cf5 wg-quick: android: use Binder for setting DNS on Android 10 4716f85 noise: recompare stamps after taking write lock 54db197 netlink: allow preventing creation of new peers when updating f1b87d1 netns: add test for failing 5.3 FIB changes a3539c4 qemu: bump default version Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* toolchain/kernel-headers: don't use TARGET_CFLAGSKevin Darbyshire-Bryant2019-10-161-4/+4
| | | | | | | | | | | Kernel utilities (e.g. scripts/kconfig/conf) are being built to run on the host system at this stage, therefore it makes no sense to use the target system CC flags. Use HOSTCFLAGS instead While we're here rename KMAKE macro to HOST_KMAKE to make it even more obvious that we're building for host. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iwinfo: update to latest Git HEADJo-Philipp Wich2019-10-161-3/+3
| | | | | | | 07315b6 nl80211: handle hidden SSIDs in wpa_supplicant scan results 3ac846e lua: fix string description of mixed WPA3 modes Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix WiFi MAC addresses for D-Link DIR-810LAdrian Schmutzler2019-10-151-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | So far, WiFi MAC addresses for this device have been set up from caldata. However, this returns values which do not look like MAC addresses. They also do not match stock firmware: wlan0 (5.0): 00:11:22:00:17:D0 from 0x8004 wlan1 (2.4): 00:11:22:00:17:CD from 0x4 (and 0x2e) It looks like the only valid MAC address on this device is at 0x28. So, this patch changes setup to calculate addresses based on the value at 0x28: lan: *:0A (flash, label) wan: *:0B (flash + 1) wifi2: *:0A (flash) wifi5: *:0C (flash + 2) Thanks to Roger Pueyo Centelles <roger.pueyo@guifi.net> for investigating this on his devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: add new acs_exclude_dfs optionFlorian Eckert2019-10-151-1/+5
| | | | | | | | | | | | The channel can be selected automatically at run time by setting channel=acs_survey or channel=0, both of which will enable the ACS survey based algorithm in hostapd. If the option acs_exclude_dfs is set in the hostpad config DFS channels from ACS are excluded on channel selection. This commit will add the possibilty to exclude the dfs channel on ACS survey. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* lantiq: fix dsl_control status handling.Martin Schiller2019-10-155-10/+10
| | | | | | | | | | Commit 7519a36774ca ("base-files,procd: add generic service status") introduced the generic 'status' command which broke the previous dsl_control status output. To fix this, let's rename the "old" command to "dslstat". Fixes: 7519a36774ca ("base-files,procd: add generic service status") Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* libevent2: Update to 2.1.11Daniel Engberg2019-10-155-81/+94
| | | | | | | | | | | | Update libevent to 2.1.11 Use CMake instead GNU Autotools Backport following commits: https://github.com/libevent/libevent/commit/f05ba671931e2b4e38459899f6f63f79f99869fe ..and partially https://github.com/libevent/libevent/commit/7201062f3ef505a77baa6ccaf1cf73812462308a to fix compilation Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* bcm53xx: sysupgrade: support Luxul NAND devicesDan Haab2019-10-151-0/+2
| | | | | | This adds support for UBI-aware sysupgrade using Luxul formats. Signed-off-by: Dan Haab <dan.haab@legrand.com>
* brcm47xx: fix switch port labels for Asus WL500GP V2Michael Heimpold2019-10-151-1/+5
| | | | | | | The switch port naming in LuCI does not fit the physical numbers on the front of this device. Since this is confusing, fix it. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* lua: fix linking under glibcRosen Penev2019-10-151-2/+2
| | | | | | | | | | | | Compilation of liblua itself works, but when other packages link against it, the linker starts throwing undefined references to a bunch of math functions in libm. First discovered in a failed attempt to transition a package to uClibc++. Signed-off-by: Rosen Penev <rosenp@gmail.com> [fix commit title capitalization] Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: use a single ath10k MAC patching function with checksumAdrian Schmutzler2019-10-155-56/+50
| | | | | | | | | | | | | | | | While all ath10k eeproms have a checksum field, so far two functions for patching ath10k MAC address have been present (and been used). This merges code to provide a single function ath10k_patch_mac in caldata.sh, having its name in accordance with ath9k functions. By doing so, correct MAC patching for current and future ath10k devices should be ensured. This patch adds checksum adjustments for several targets on ath79 and lantiq. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: add label MAC address for FritzBox 4040Adrian Schmutzler2019-10-151-0/+1
| | | | | | | | | | The CWMP-Account on the device's label contains the eth0 MAC address. This only changes 4.19 files as label-mac-device is introduced after 19.07 branch, so there won't be a 4.14 release anymore. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: correct ar71xx boardname for UniFi AC LiteDavid Bauer2019-10-151-1/+1
| | | | | | | | | This corrects the additional boardname for the image metadata to the one used in ar71xx. The previously present additional entry was never used on a running system. Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: correct TP-LINK TL-WDR4900 MAC addressesDavid Bauer2019-10-152-4/+4
| | | | | | | | | | | | | | This commit fixes TP-Link TL-WDR4900 v1 MAC address assignment. Previously, the MAC addrss was read for the ethernet from the "config" partition. However, the content of this partition is dependent on the firmware which was previously installed on the device. Switch the MAC address source to the U-Boot partition, where the MAC address is always present at a fixed partition. The partition was previously already used for the WiFi MAC-addresses. Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for UniFi AC-LRAndreas Ziegler2019-10-155-1/+19
| | | | | | | | | | | | | | The Unifi AC-LR has identical hardware to the Unifi AC-Lite. The antenna setup is different according to the vendor, which explains the thicker enclosure. Therefore, it is helpful to know the exact device variant, instead of having "Ubiquiti UniFi-AC-LITE/LR". Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de> [fix legacy name in commit message; add old boardname to SUPPORTED_DEVICES] Signed-off-by: David Bauer <mail@david-bauer.net>
* gdb: bump to 8.3.1Koen Vandeputte2019-10-156-31/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GDB 8.3.1 brings the following fixes and enhancements over GDB 8.3: PR c++/20020 (GDB segfault on printing objects) PR gdb/24454 (nat/x86-linux-dregs.c failed assertion) PR breakpoints/24541 (Incorrect evaluation of systemtap probes due to register being signed and probe expression assuming unsigned) PR symtab/24545 (Symbol loading performance regression with cc1) PR gdb/24592 (amd64->i386 linux syscall restart problem) PR gdb/25009 (terminate called after throwing an instance of 'srchilite::ParserException') PR gdb/25010 (Calls to error () can cause SIGTTOU to send gdb to the background) PR breakpoints/25011 (Breakpoints on file reloads broken for PIE binaries) This corrective release also brings the following testsuite fixes and enhancements: PR testsuite/25005 (gdb-caching-proc.exp takes a lot of time on skip_opencl_tests) PR testsuite/25016 (Test-case failures for -pie) GDB 8.3 includes the following changes and enhancements: * Support for new native configurations (also available as a target configuration): - RISC-V GNU/Linux (riscv*-*-linux*) - RISC-V FreeBSD (riscv*-*-freebsd*) * Support for new target configurations: - CSKY ELF (csky*-*-elf) - CSKY GNU/Linux (csky*-*-linux) - NXP S12Z ELF (s12z-*-elf) - OpenRISC GNU/Linux (or1k*-*-linux*) * Native Windows debugging is only supported on Windows XP or later. * The Python API in GDB now requires Python 2.6 or later. * GDB now supports terminal styling for the CLI and TUI. Source highlighting is also supported by building GDB with GNU Highlight. * Experimental support for compilation and injection of C++ source code into the inferior (requires GCC 7.1 or higher, built with libcp1.so). * GDB and GDBserver now support IPv6 connections. * Target description support on RISC-V targets. * Various enhancements to several commands: - "frame", "select-frame" and "info frame" commands - "info functions", "info types", "info variables" - "info thread" - "info proc" - System call alias catchpoint support on FreeBSD - "target remote" support for Unix Domain sockets. * Support for displaying all files opened by a process * DWARF index cache: GDB can now automatically save indices of DWARF symbols on disk to speed up further loading of the same binaries. * Various GDB/MI enhancements. * GDBserver on PowerPC GNU/Linux now supports access to the PPR, DSCR, TAR, EBB/PMU, and HTM registers. * Ada task switching support when debugging programs built with the Ravenscar profile added to aarch64-elf. * GDB in batch mode now exits with status 1 if the last executed command failed. * Support for building GDB with GCC's Undefined Behavior Sanitizer. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>