aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: remove chunked-io patch and set spi->max_transfer_size insteadFelix Fietkau2018-02-248-188/+55
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: optimize for performance by default starting with 4.14Felix Fietkau2018-02-247-2/+14
| | | | | | Keep size optimizations for smaller targets that already switched Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: generic: Fix skip GRO for foreign MAC address patchesHauke Mehrtens2018-02-242-4/+18
| | | | | | | | | | | | | Somewhere in the kernel 4.9 migration process it looks like this patch was broken. The update should be done when a device is added to the bridge and when it gets removed, currently it is only done on the remove path twice which does not make any sense. I do not have a setup to test this now so this is only compile tested. Fixes: f791fb4af450 ("kernel: add linux 4.9 support") Fixes: b3f95490b9be ("kernel: generic: Add kernel 4.14 support") Reported-by: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: add lscpu packageTomasz Moń2018-02-241-0/+16
| | | | | | lscpu is used by lxc-debian template. Signed-off-by: Tomasz Moń <desowin@gmail.com>
* samba36: fix build (issue #5574)Jakub Tymejczyk2018-02-241-0/+1
| | | | | | | | | | | | As indicated in #5574 samba fails to build with linker error due to lack of talloc_* functions when the packet libtalloc also gets build. According to Makefile it is compiled with "--without-libtalloc" option. Running ./configure --help shows that there is another option connected to libtalloc: --enable/disable-external-libtalloc. Adding this option fixes build. Signed-off-by: Jakub Tymejczyk <jakub@tymejczyk.pl>
* iproute2: Add support for ports in xfrm on SCTPHauke Mehrtens2018-02-241-18/+0
| | | | | | | | Remove this old patch which prevents showing the xfrm ports for SCTP This was added in commit 60c1f0f64d23 ("finally move buildroot-ng to trunk") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest version, improves performance and fixes tx power ↵Felix Fietkau2018-02-241-3/+3
| | | | | | | | | issues 62d52e9 mt76: set RX_FLAG_DUP_VALIDATED for A-MPDU reordered packets 5ba5995 mt76x2: rework tx power handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iptables: update to 1.6.2Ansuel Smith2018-02-231-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 459b6932 policy: add nft translation for simple policy none/strict use case 255e55b7 tests: xlate-test: no need to require superuser privileges 6990bbc5 extensions: hashlimit: remove space before burst in translation to nft 13ecaeb0 extensions: hashlimit: Rename 'flow table' keyword to meter c252a2b0 extensions: Add test for cluster nft translation bda1daa4 extensions: ip6t_{S,D}NAT: add more tests 88fa4543 extensions: ip6t_{S,D}NAT: multiple to-dst/to-src arguments not reported 64a0e098 extensions: libxt_cluster: Add translation to nft 6067208f extensions: add support for 'srh' match 0f387b07 extensions: hashlimit: fix incorrect burst in translations 1ffe6a74 extensions: libxt_hashlimit: Do not print default timeout and burst 27de281d extensions: Add macro _DEFAULT_SOURCE. 75364151 iptables: Remove const qualifier from struct option. 8b0da213 iptables: masquerade: add randomize-full support e64db006 iptables: patch to correct linker flag sequence 033eac81 extensions: libxt_tcpmss: Add test case for invalid ranges. 505bfa11 iptables: xtables-eb: Remove const qualifier from struct option a6d6821a iptables: extensions: Fix MARK target help 71de414c libxt_sctp: fix array out of range in print_chunk 1a32381a extensions: add tests for ipcomp protocol 4bd51770 tests: xlate: print output in same way as nft-test.py d0e3d95f libxt_recent: Remove ineffective checks for info->name 23e6ed71 libxt_TOS: add tests for translation infrastructure 9564595e Update .gitignore bebce197 iptables: iptables-compat translation for TCPMSS dbbab0aa extensions: libxt_tcpmss: Detect invalid ranges 0e958281 iptables-translate: add test file for TCPMSS extension de3c68b6 iptables-compat: do not allow to delete populated user define chains f4b80ce7 iptables: change large file support handling f5b46c2f iptables: Constify option struct 21ba5b38 ip{,6}tables-restore: Don't accept wait-interval without wait 60e0ffd3 ip{,6}tables-restore: Don't ignore missing wait-interval value af468b6e utils: Add a man page for nfnl_osf 1773dcaa utils: nfnl_osf: Fix synopsis in help text 895ce096 extensions: libxt_bpf: fix missing __NR_bpf declaration 3c633296 xtables-compat-restore: fix translation of mangle's OUTPUT 1c32e560 netfilter: xt_hashlimit: add rate match mode b5331f88 xtables-compat: fix memory leak when listing 91ae12e3 xtables-compat-restore: fix several memory leaks 79e1edd1 iptables-xml: Fix segfault on jump without a target c49a93f1 xtables-translate: fix double space before comment 79fa7cc2 libip6t_icmp6: xlate: remove leftover space 8e62f572 tests: xlate: generalize owner 8d994bcf iptables: Add file output option to iptables-save f8e5ebc5 iptables: Fix crash on malformed iptables-restore 80d8bfaa iptables: insist that the lock is held. c29d99c8 libxtables: Display weird character warning for wildcards 1fe96cfb tests: xlate: check if it is being run as root 3f92b259 tests: xlate: remove python 3.5 dependency d89dc47a iptables-restore/save: exit when given an unknown option 65801d02 iptables-restore.8: document -w/-W options 9cd3adbe iptables-restore/ip6tables-restore: add --version/-V argument 1ec1fb7a extensions: libxt_hashlimit: fix 64-bit printf formats 27f69f4a iptables: extensions: Remove typedef in struct. 340105fa tests: add regression tests for xtables-translate b669e184 extensions: libxt_TOS: Add translation to nft b2a84476 iptables: Remove unnecessary braces. 2963a8df iptables: Remove explicit static variables initalization. 1cf4ba6f iptables: Constify option struct 999eaa24 iptables-restore: support acquiring the lock. 6e2e169e iptables: remove duplicated argument parsing code 836846f0 iptables: move XT_LOCK_NAME from CFLAGS to config.h. b91af533 iptables: set the path of the lock file via a configure option. 0e94eb2e iptables-translate: print nft iff there are more expanded rules to print 48ad179b libxtables: abolish AI_CANONNAME 9f50bbdf libxtables: remove unnecessary nesting from host_to_ip(6)addr c6df55d6 iptables-translate: print nft command for each expand rules via dns names 82dacbb8 xtables-translate: Avoid querying the kernel 9f972f45 extensions: libxt_addrtype: Add translation to nft 2c8e251e utils: nfsynproxy: fix build with musl libc 9b8cb756 libiptc: don't set_changed() when checking rules with module jumps eb66632d extensions: libxt_hashlimit: Add translation to nft 72bb3dbf xshared: using the blocking file lock request when we wait indefinitely 24f81746 xshared: do not lock again and again if "-w" option is not specified fc3c3b4e libxt_hashlimit: add new unit test to catch kernel bug 516d9191 iptables: update pf.os Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: sync fast-rx patch with updated versionFelix Fietkau2018-02-232-20/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix various issues with fast-rx modeFelix Fietkau2018-02-235-2/+153
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeontx: use the generic board detectionMathias Kresin2018-02-232-45/+1
| | | | | | | Use the generic board detection based on the device tree compatible string instead of a target specific one. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: enable power LED and second uart on GL-MT300N-V2Benjamin Valentin2018-02-232-2/+12
| | | | | | | | | The device has a second uart accessible via pin headers, so enable it. There is also a green power led which was not enabled previously. Enable it too and use it as status LED. Signed-off-by: Benjamin Valentin <benjamin.valentin@volatiles.de>
* mediatek: disable missing kernel symbolMathias Kresin2018-02-231-0/+1
| | | | | | | This caused v4.14.20 based builds so fail on mediatek. Fixes: 6112abf186bf ("kernel: enable CONFIG_USB_PCI for PCI usb modules"). Signed-off-by: Mathias Kresin <dev@kresin.me>
* apm821xx: nand remove obsolete kernel config symbolMathias Kresin2018-02-231-1/+0
| | | | | | | | | | | | | | | | | | The missing CONFIG_USB_XHCI_PCI dependency on CONFIG_USB_PCI of the µPD720201 xhci-pci(e) usb 3.0 chip used by the WNDR4700 was fixed with 6112abf186bf ("kernel: enable CONFIG_USB_PCI for PCI usb modules"). Commit c38fb585763f ("kernel: fix disabling common usb quirks on 4.14") finally fixed the following build error: drivers/usb/host/xhci-pci.c: In function 'xhci_pci_probe': drivers/usb/host/xhci-pci.c:749:6: error: implicit declaration of function 'usb_xhci_needs_pci_reset' [-Werror=implicit-function-declaration] if (usb_xhci_needs_pci_reset(dev)) { Hence the CONFIG_USB_PCI symbol isn't required any longer in target kernel config. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-envtools: add support for ALFA Network AWUSFREE1Piotr Dymacz2018-02-221-6/+7
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: add support for ALFA Network AWUSFREE1Piotr Dymacz2018-02-226-20/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ALFA Network AWUSFREE1 is an USB Wi-Fi N300 adapter based on MT7628. Specification: - MT7628AN (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (MT7628) with external FEM (RFFM4203) - 2x detachable antennas (RP-SMA) - ASIX AX88772 USB to Ethernet bridge (connected with MT7628 PHY0) - 4x LED (2 driven by GPIO) - 1x button (reset) - 1x mini USB for host and main power input - UART header on PCB Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot: 1. Power device with reset button pressed and release it after ~5 sec. 2. Setup static IP 192.168.1.2/4 on your PC. 3. Go to 192.168.1.1 in browser and upload "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for GainStrong Oolite V5.2Piotr Dymacz2018-02-2213-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are available on castellated pins. Specification: - 650/400/200 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet (all ports available on castellated pins) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11) - 3x U.FL - 1x USB 2.0 The dedicated development board includes 5 FE ports, USB 2.0 port, two buttons (one directly connected to SOC reset input), header with all GPIOs and several LEDs. Flash instruction: Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to flash OpenWrt firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: rework GainStrong devices supportPiotr Dymacz2018-02-2215-233/+170
| | | | | | | | | - combine support for Oolite/MiniBox V1.0 in single mach-*.c file - fix model/board names - include correct/full vendor name - drop redundant package and factory image Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: cosmetic cleanups in 04_led_migrationPiotr Dymacz2018-02-221-26/+8
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: drop comment from 02_networkPiotr Dymacz2018-02-221-1/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for AR9331 based Hak5 devicesSebastian Kinne2018-02-2214-2/+380
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for AR9331 based Hak5 penetration testing tools: - WiFi Pineapple NANO - LAN Turtle - Packet Squirrel WiFi Pineapple NANO specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus) - Ethernet: 1x FE over USB (ASIX AX88772A) - Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD - Power: USB 5 V, 1.5 A - Other: status LED, reset button LAN Turtle specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: none - Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B) - Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot - Power: USB 5 V, 0.5 A - Other: status LED, reset button (inside, on PCB) Packet Squirrel specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: none - Ethernet: 2x FE (AR9331) - Ports: 2x RJ45, 1x USB 2.0 - Power: USB 5 V, 0.12 A - Other: status LED, reset button, 4-way switch Flash instructions for all 3 devices: Original firmware is based on OpenWrt. Use sysupgrade via SSH to flash. Signed-off-by: Sebastian Kinne <contact@sebkinne.com> [squashed commits, combined and reworked mach files, aligned board naming with general convention, fixed minor issues, tested on real hardware, reworded commit subject and description] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix 5 GHz Wi-Fi on NBG6716Matti Laakso2018-02-221-1/+7
| | | | | | | | | | Some NBG6716 do not have ath10k calibration data in flash, only in chip OTP. To determine if flash has a valid calibration data, the first two bytes telling the length of the calibration data are checked against the requested length. If the lengths match, calibration data is valid and read from flash. Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
* ar71xx: YunCore AP90Q image supports also AP80QPiotr Dymacz2018-02-224-5/+5
| | | | | | | Vendor released new model (AP80Q) which is identical from hardware point of view with already supported AP90Q. Include AP80Q in machine name. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for YunCore T830Piotr Dymacz2018-02-221-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for YunCore T830Piotr Dymacz2018-02-2213-0/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | YunCore T830 is a simple N300 router with 5-port FE switch, detachable antennas and USB 2.0 port. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531), with ext. PA (SKY65174-21) and LNA - two external, detachable antennas (RP-SMA) - 1x USB 2.0 - 8x LED (7 driven by GPIO) - 1x button (reset) - DC jack for main power input (12 V) - UART and JTAG headers on PCB Flash instruction: 1. First, gain root access to the device, following below steps: - Login into web gui (default password/IP: admin/192.168.188.253). - Go to "Advanced" -> "Management" -> "System" and download backup of configuration (bakfile.bin). - Open the file as tar.gz archive, edit/update "shadow" file and change hash of root password to something known. - Repack the archive, rename it back to "bakfile.bin" and use to restore configuration of the device. - After that, device will reboot and can be accessed over SSH. 2. Then, install OpenWrt: - Login over SSH and issue command: fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" - Upload "sysupgrade" image and install it (only if previous command succeeded) with command: "sysupgrade -n -F openwrt-...". Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for Samsung WAM250Piotr Dymacz2018-02-221-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for Samsung WAM250Piotr Dymacz2018-02-2212-1/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Samsung WAM250 is a dual-band (selectable, not simultaneous) wireless hub, dedicated for Samsung Shape Wireless Audio System. The device is based on Atheros AR9344. FCC ID: A3LWAM250. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2x 10/100 Mbps Ethernet - 2T2R 2.4/5 GHz (AR9344), with ext. PA (SE2598L, SE5003L) and LNA - 1x USB 2.0 - 4x LED (all are driven by GPIO) - 2x button (reset, wps/speaker add) - DC jack for main power input (14 V) - UART header on PCB (J4, RX: 3, TX: 5) Flash instruction: This device uses dual-image (switched between upgrades) with a common jffs2 config partition. Fortunately, there is a way to disable this mode so that more flash space can be used by OpenWrt image. You can easily access this device over telnet, using root/root credentials (the same also work for serial console access). 1. Make sure that your device uses second (bootpart=2) image using command: "fw_printenv bootpart". 2. If your device uses first image (bootpart=1), perform upgrade to the latest vendor firmware (after the update, device should boot from second partition) using web gui (default login: admin/1234567890). 3. Rename "sysupgrade" image to "firmware.bin", download it (you can use wget, tftp or ftpget) to "/tmp" and issue below commands: mtd_debug erase /dev/mtd3 0 $(wc -c /tmp/firmware.bin | awk -F' ' '{print $1}') mtd_debug write /dev/mtd3 0 $(wc -c /tmp/firmware.bin) fw_setenv bootpart fw_setenv bootcmd "bootm 0x9f070000" reboot Revert to vendor firmware instruction: 1. Download vendor firmware to "/tmp" device and issue below commands: fw_setenv bootpart 1 sysupgrade -n -F SS_BHUB_v2.2.05.bin Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix COMFAST CF-E375AC supportPiotr Dymacz2018-02-225-37/+34
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for COMFAST CF-E385ACPiotr Dymacz2018-02-229-38/+174
| | | | | | | | | | | | | | | | | | | | | | | | | | COMFAST CF-E385AC is an AC2200 ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9558 + QCA9984 + QCA8337N. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 256 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2x 10/100/1000 Mbps Ethernet, with PoE support - 3T3R 2.4 GHz (QCA9558), with external LNA and PA (SE2576L) - 4T4R 5 GHz (QCA9984), with external FEM (SKY85728-11) - 7x internal antennas - 1x RGB LED (driven by GPIO) - 1x button (reset) - UART, LEDs/GPIO and USB headers on PCB - external watchdog (Pericon Technology PT7A7514) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: remove unnecessary packages from COMFAST devicesPiotr Dymacz2018-02-221-5/+9
| | | | | | | swconfig and uboot-envtools packages are not required by any of the supported COMFAST devices. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: rename COMFAST CF-E355AC to CF-E355AC v1Piotr Dymacz2018-02-226-27/+52
| | | | | | | | There are now supported two versions of the CF-E355AC board which differ in 802.11ac radio chip. Include version number in board, model, image filename, etc., also for the v1. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: image: simplify Embedded Wireless definitionsPiotr Dymacz2018-02-221-7/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: image: generic: use simply expanded variablesPiotr Dymacz2018-02-221-16/+16
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: image: generic: clean up trailing whitespacePiotr Dymacz2018-02-221-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for COMFAST CF-E355AC v2Ding Tengfei2018-02-228-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | COMFAST CF-E355AC v2 is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9531 + QCA9886. Short specification: - 2x 10/100 Mbps Ethernet, with PoE support - 128MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, 802.11b/g/n - 2T2R 5 GHz, 802.11ac/n/a, WAVE 2 - built-in 4x 3 dBi antennas - output power (max): 500 mW (27 dBm) - 1x RGB LED, 1x button - built-in watchdog chipset Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei <dtf@comfast.cn> [updated kernel config for both boards] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: disable 40Mhz refclk for QCA953xSven Eckelmann2018-02-228-50/+32
| | | | | | | | | | | | | | | | | | The "QCA9531 v2.0 802.11n 2x2 2.4 GHz Premium SOC for WLAN Platforms" datasheet (80-Y7991-1 Rev. C - October 2014) doesn't specify support for a 40 Mhz reference clock. The register description for "Bootstrap Options" (page 31) defines following states for the bit 4 (REF_CLK): * 0 - CLK25 (default) * 1 - (reserved) Devices like the TP-Link CPE210 v2 has this bit set to 1 but is using a 25 Mhz reference clock. OpenWrt is still interpreted this bit as 40 Mhz and then break the bootup of the system due to this incorrect interpretation. Signed-off-by: Sven Eckelmann <sven@narfation.org> [refreshed patches] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for WHQX E1700AC/E600G/E600GAC v2Piotr Dymacz2018-02-221-0/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2Peng Zhang2018-02-2215-6/+453
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WHQX E1700AC v2 is based on Qualcomm QCA9563 + QCA9880 + QCA8334. Specification: - 750/400/250 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz (QCA9563) with external FEM (SKY85309-11) - 3T3R 5 GHz (QCA9880) with external FEM (SKY85728-11) - 2x 10/100/1000 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 1x USB 2.0 - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 2-pos switch - 1x DC jack for main power input (9-48 V) - UART (J5) and LEDs (J13) headers on PCB WHQX E600G is based on Qualcomm QCA9531. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9531) with external PA (LXK-6601) - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (with PCIe and USB 2.0 buses) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J100), SIM (J34), JTAG (J5) and LEDs (J7) headers on PCB WHQX E600GAC is based on Qualcomm QCA9531 + QCA9887. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) with external FEM (SKY85703-11) - 2x 10/100 Mbps Ethernet - 6x LED (1x RGB, 5 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-12 V) - UART (J100), USB (J102), JTAG (J5) and LEDs (J7) header on PCB Important notice: First version of these boards are using different mtd layout, with ART data at the end. You should not use v2 images on v1 board because it will result in lost of ART data! Flash instruction (using U-Boot CLI and tftp server): 1. Configure PC with static IP 192.168.1.10 and tftp server. 2. Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. 3. Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. 4. Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): 1. Configure PC with static IP 192.168.1.xxx(2-254)/24. 2. Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. 3. Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: Peng Zhang <sd20@qxwlan.com> [reworked: image generation code, mach-* files, commit description, fixed minor code style issues, rebased on master] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix typos and indentation in Kconfig.openwrtPiotr Dymacz2018-02-221-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: include vendor name for GL iNet productsKyson Lok2018-02-224-5/+4
| | | | | | | This patch include GL.iNet vendor name in the machine name for GL.iNet vendor products. Signed-off-by: Kyson Lok <kysonlok@gmail.com>
* ar71xx: uniform GL iNet products mach nameKyson Lok2018-02-223-4/+4
| | | | | | | The mach name of GL AR150 and GL AR300 is inconsistent with other products. Signed-off-by: Kyson Lok <kysonlok@gmail.com>
* ramips: mt7621: fix usb initRoman Yeryomin2018-02-221-0/+1
| | | | | | | | | | In 4.14 reg-names is required to identify resources. Otherwise init fails with: [ 5.900501] xhci-mtk 1e1c0000.xhci: invalid resource [ 5.910499] xhci-mtk: probe of 1e1c0000.xhci failed with error -22 Signed-off-by: Roman Yeryomin <roman@advem.lv>
* ath9k: merge a RCU fix for station tx cleanupFelix Fietkau2018-02-221-0/+43
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeontx: remove lots of bogus kernel config overridesFelix Fietkau2018-02-221-73/+3
| | | | | | Some of them break when building with all modules enabled Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing symbolTim Harvey2018-02-221-0/+1
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: remove undefs of CONFIG_NET_VENDOR_*Tim Harvey2018-02-221-52/+0
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: remove unnecessary CONFIG_DEBUG_INFOTim Harvey2018-02-221-1/+0
| | | | | Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: add fpu supportTim Harvey2018-02-221-1/+1
| | | | | Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: remove CFLAGSTim Harvey2018-02-221-1/+0
| | | | | | | | You should not define CFLAGS for the toolchain as this will also leak into other targets if they share the same toolchain. Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: add FAT FS support to kernelTim Harvey2018-02-221-0/+2
| | | | | | | The CN80XX Boot firmware uses an embedded FAT12 filesystem. For some reason busybox can't mount this unless its enabled static in the kernel. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 12:10:45 +0000