aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kirkwood: add wpad-mini to guruplug profileLuka Perkov2015-01-251-1/+1
| | | | | | Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 44125
* kirkwood: enable swconfig by default on EA3500Luka Perkov2015-01-251-1/+1
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44124
* kirkwood: fix EA3500 ubi optionsLuka Perkov2015-01-251-2/+2
| | | | | | | | Previous options resulted in a nonfunctional image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44123
* kirkwood: drop port-based VLAN setupLuka Perkov2015-01-251-19/+6
| | | | | | | | | | | | | | | | | Using port-based VLANs depends on a non-standard swconfig parameter, which compilcates things like LuCI that don't know about it. This patch changes the default to use 802.1q VLANs internally in the switch, but without tagging packets since we have two Ethernet ports. iperf3 tests indicate no difference in performance versus port-based VLANs when the CPU port is not using tags. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44122
* generic/3.18: update to 3.18.3Imre Kaloz2015-01-252-12/+8
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44121
* kernel: fix typo in hwmon.mk (#18813)Felix Fietkau2015-01-251-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44120
* include: drop kernel 3.3.x leftoversLuka Perkov2015-01-241-2/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44119
* ralink: fix ethernet feature TSO not workFelix Fietkau2015-01-247-155/+197
| | | | | | | | | | | | | | | | * fix TSO features verify on mt7621 firewrt board * improve tx clean up. no need to access uncached memory. also use TX_DTX register instead of read tx ring DONE bit * mt7621 need napi weight 64 to get more performance * remove netif_receive_skb, after kernel version 3.7 tcp4_gro_receive can handle tcp checksum. on rt2880 use iperf tcp LAN to WAN throughput test. with gro 135 Mbits/sec. without gro 80.4Mbits/sec. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44118
* ralink: init tx/rx vlan offload register for mt7621Felix Fietkau2015-01-242-5/+23
| | | | | | | | | | on mt7621 don't have tx vlan vid registers. so set FE_REG_FE_DMA_VID_BASE to 0. set rx vlan offload register to disable. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44117
* ralink: use fe_max_buf_size to get rx buffer sizeFelix Fietkau2015-01-241-7/+5
| | | | | | | | | | the rx_buf_size now is 1534 when mtu is 1500. the ethernet frame with vlan tag and FCS is 1522. so the buffer is enough. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44116
* ramips: fix ethernet vlan tx offload support checkFelix Fietkau2015-01-241-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44115
* kernel: eliminate a few kernel_patchver_*/CompareKernelPatchVer callsFelix Fietkau2015-01-243-8/+9
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44114
* kernel: drop obsolete kernel version checksFelix Fietkau2015-01-248-86/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44113
* ep93xx: remove obsolete kernel version checkFelix Fietkau2015-01-241-7/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44112
* x86: remove linux 3.3 supportFelix Fietkau2015-01-2413-1811/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44111
* build: drop obsolete kernel version dependenciesFelix Fietkau2015-01-2413-31/+25
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44110
* kernel: remove linux 3.3 patches and configFelix Fietkau2015-01-24179-45292/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44109
* pxa: mark as brokenFelix Fietkau2015-01-241-1/+1
| | | | | | It still uses the long obsolete 3.3 kernel version SVN-Revision: 44108
* x86: mark the ep80579 subtarget as brokenFelix Fietkau2015-01-241-0/+1
| | | | | | | | It still uses the long obsolete 3.3 kernel version Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44107
* mcs814x: remove linux 3.3 supportFelix Fietkau2015-01-2446-4103/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44106
* ar8216: prefix mii_xxx functions to avoid kernel namespace pollutionFelix Fietkau2015-01-243-18/+18
| | | | | | | | | Prefix the exported mii_xxx32 functions with ar8xxx_ to avoid kernel namespace pollution. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44105
* ar8216: add swconfig attribute to display ARL table on AR8327/AR8337Felix Fietkau2015-01-244-15/+220
| | | | | | | | | | | | | | Add global read-only swconfig attribute "arl_table" to display the address resolution table. So far the chip-specific part is implemented for AR8327/AR8337 only as I don't have the datasheets for the other AR8XXX chips. Successfully tested on TL-WDR4300 (AR8327rev2) and TL-WDR4900 (AR8327rev4). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44104
* ar8216: decrease page switch wait timeFelix Fietkau2015-01-242-3/+9
| | | | | | | | | | | | | | | | | | | | | | Until a few years ago the page switch wait time was set to msleep(1) what was changed to usleep_range(1000, 2000) later. I can not imagine that a low-level operation like switching page on register level takes so much time. Most likely the value of 1ms was initially set to check whether it fixes an issue and then remained w/o further checking whether also a smaller value would be sufficient. Now the wait time is set to 5us and I successfully tested this on AR8327. IMHO 5us should be plenty of time for all supported chips. However I couldn't test this due to missing hardware. If other chips should need a longer wait time we can add the wait time as a parameter to the ar8xxx_chip struct. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44103
* ar8216: add link change detection for switch portsFelix Fietkau2015-01-242-0/+36
| | | | | | | | | | Check for switch port link changes and - flush ATU in case of a change - report link change via syslog Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44102
* ar8216: fix ATU flushingFelix Fietkau2015-01-242-9/+5
| | | | | | | | | | | | | | | | | | The functionality to flush the address translation table contains two bugs which luckily compensate each other. 1. Just setting the operation is not sufficient to perform the flushing. The "active" bit needs to be set to actually trigger an action. For the vtu operations this is implemented correctly. 2. ar8xxx_phy_read_status is called every 2s by the phy state machine to check for link changes. This would have caused an ATU flush every 2s. Fix the chip-specific ATU flush functions and remove the ATU flush call from ar8xxx_phy_read_status. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44101
* mac80211/hostapd: fix HT mode setup for RSN ad-hoc networksFelix Fietkau2015-01-242-30/+35
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44100
* relayd: prevent start for disabled interfacesFelix Fietkau2015-01-241-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44099
* netifd: fix a regression with some VLAN configurations introduced in the ↵Felix Fietkau2015-01-241-2/+2
| | | | | | | | last update Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44098
* ppp: on PPPoE, always send PADT when shutting down the connectionFelix Fietkau2015-01-241-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44097
* netifd: do not stop service on shutdown, only call ifdownFelix Fietkau2015-01-241-1/+1
| | | | | | | | Also add a small delay, like on restart Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44096
* ppp: rework host-uniq support to take hex encoded stringsJo-Philipp Wich2015-01-243-49/+149
| | | | | | | | | | | The previous implementation of the "host-uniq" option used plain strings for passing the value to pppd which made it impossible to specify binary data. Switch the format to a hex encoded string to support binary data. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44094
* netifd: update to the latest version, fixes bridge reload (#18351) and ↵Felix Fietkau2015-01-241-2/+2
| | | | | | | | device config issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44093
* netifd: store additional DHCP lease informationJo-Philipp Wich2015-01-231-7/+7
| | | | | | | | | Extend the DHCPv4 handler script to store additional information from the DHCP lease in the per-interface data object. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44092
* include, base-files: align default repository url with changed buildbot ↵Jo-Philipp Wich2015-01-232-4/+3
| | | | | | | | structure Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44091
* Revert "version.mk: add "%s" placeholder for dotted target.subtarget notation"Jo-Philipp Wich2015-01-231-2/+1
| | | | | | This reverts commit d388882dccc1b25575939c3713b3ab394c371fd0. SVN-Revision: 44090
* Revert "version.mk: explicitely filter "generic" subtarget for "%s" ↵Jo-Philipp Wich2015-01-231-1/+1
| | | | | | | | placeholder (#18710)" This reverts commit d907396dc1c2ae0268dc54835b108afef4761d4e. SVN-Revision: 44089
* scripts: remote-gdb: fix target / libc matching on directory namesJo-Philipp Wich2015-01-231-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44088
* base-files: fix led script to skip missing triggersJohn Crispin2015-01-231-1/+5
| | | | | | | | this is based on http://patchwork.ozlabs.org/patch/424451/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44087
* uboot-lantiq: add a cgu fix for arx100John Crispin2015-01-231-0/+148
| | | | | | | | http://patchwork.ozlabs.org/patch/431024/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44086
* ar71xx: add support for TP-LINK TL-WR843ND v1John Crispin2015-01-233-0/+16
| | | | | | | | | TP-LINK TL-WR843ND v1 is the same model like wr41, but with Power over Ethernet on wan port. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44085
* modules: add 6LoWPAN over Bluetooth Low EnergyJohn Crispin2015-01-231-0/+20
| | | | | | | | | | | Adding support 6LoWPAN over Bluetooth Low Energy in kernel 3.18. Creating new bluetooth_6lowpan group with CONFIG_6LOWPAN and CONFIG_BT_6LOWPAN. Adding kernel object dependencies for 6LoWPAN over Bluetooth Low Energy. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44084
* lantiq: correct value for fpi clock on ar9John Crispin2015-01-231-0/+21
| | | | | | | | | | | | | | | | | | | | | This adds a patch to target/linux/lantiq/patches-3.14 fixing a bug clock code on ar9. The current version returns the wrong value for the fpi clock frequency in some cases. See discussion for further details: https://lists.openwrt.org/pipermail/openwrt-devel/2015-January/030688.html I'm not sure about the patch naming and numbering convention. Do please let me know it this is not OK. Many thanks, Ben Mulvihill Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 44083
* gmp: use http instead of ftp download (#18805)Felix Fietkau2015-01-231-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44082
* ubus: update to the latest versionFelix Fietkau2015-01-231-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44081
* libubox: update to the latest versionFelix Fietkau2015-01-231-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44080
* build: revert r44076John Crispin2015-01-223-36/+8
| | | | | | | | the patch causes issues when installing feeds Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44078
* ar71xx: add support for the UniFi AP Outdoor PlusJohn Crispin2015-01-226-3/+72
| | | | | | | | the GPIO controlling the rf filter is not configured properly by this patch. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44077
* build: allow openwrt.git packages to be replaced by feedsJohn Crispin2015-01-223-8/+36
| | | | | | | | | | | | | | | | | | | | | Currently, replacing a package available in openwrt.git requires modifications in openwrt.git, or requires duplicating the package in a feed but with a different name, which causes all kind of problems related to dependencies (all packages selecting it would have to be modified accordingly to select the new package). With this change, if a package with the same name is present both in feeds/ and package/ folders, the one in feeds/ can override the one in package/, both in the menuconfig and during the build, by passing the "-f" option to "./scripts/feeds install" This mechanism is particularly useful for vendor tree, or in general for application which needs to replace one particular package which exists within openwrt.git by a custom/newer version. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> SVN-Revision: 44076
* modules: f2fs: enable support for xattrJohn Crispin2015-01-221-1/+1
| | | | | | | | To use overlayfs on f2fs, xattr needs to be supported. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44075
* modules: f2fs: add missing symbols for 3.18John Crispin2015-01-221-0/+2
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44074