aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mt76: update to the latest versionFelix Fietkau2018-01-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | 2b7fae4 mt76: fix returnvar.cocci warnings 939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params() cf59170 mt76x2: dfs: add set_domain handler 5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params() f76e25f mt76x2: fix WMM parameter configuration 34d612d mt76: retry rx polling as long as there is budget left 0f8327a mt76x2: fix TSF value in probe responses ad3f8e9 mt76: add an intermediate struct for rx status information 58a41f1 mt76: get station pointer by wcid and pass it to mac80211 b0508d3 mt76: implement A-MPDU rx reordering in the driver code cf3cfc4 mt76: split mt76_rx_complete 461cdf9 mt76: pass the per-vif wcid to the core for multicast rx 9b2c778 mt76: validate rx CCMP PN 302af90 mt76x2: init: disable all pending tasklets during device removal 9f685fe mt7603: init: disable tbtt tasklet during device removal c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames 3968dae mt7603: fix 40 mhz channel bandwidth reporting 9c2e03d mt7603: fix rx LDPC reporting Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add ew-balin platform from Embedded WirelessCatrinel Catrinescu2018-01-2512-0/+148
| | | | | | | | | | | | | | | | | | | Add the Embedded Wireless "Balin" platform SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCI-Express: 1 x lane PCIe 1.2 UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade" image directly in vendor firmware. Signed-off-by: Catrinel Catrinescu <cc@80211.de>
* ar71xx: add unaligned access hacks for VXLANMatthias Schiffer2018-01-251-0/+92
| | | | | | Gives a ~5% performance gain. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* musl: move BUILD_DIR_TOOLCHAIN/musl symlink to configure stepFelix Fietkau2018-01-251-11/+1
| | | | | | Avoids Build/Prepare quilt related hacks Signed-off-by: Felix Fietkau <nbd@nbd.name>
* musl: allow autorebuildFelix Fietkau2018-01-251-1/+3
| | | | | | | | | Autorebuild is disabled for the toolchain to avoid build-order issues. However, rebuilding musl is safe, so exclude it from that restriction. Avoids the need for manual cleaning on kernel header <-> libc API changes like the ones introduced recently Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: mesh: drop frames appearing to be from usFelix Fietkau2018-01-251-0/+25
| | | | | | | Upstream backport to fix issues arising from devices with duplicate MAC addresses Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for Widora Neo 32MB flash revisionJackson Ming Hu2018-01-235-1/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Widora has updated their Widora Neo board recently. The new model uses 32MB WSON-8 factor SPI flash instead of the original 16MB SOP-8 factor SPI flash. All the other hardware components are the same as the first revision. Detailed hardware specs listed below: CPU: MTK MT7688AN RAM: 128MB DDR2 ROM: 32MB WSON-8 factor SPI Flash (Winbond) WiFi: Built-in 802.11n 150Mbps? Ethernet: 10/100Mbps x1 Audio codec: WM8960 Other IO: USB OTG; USB Power+Serial (CP2104); 3x LEDs (Power, LAN, WiFi); 2x Keys (WPS, CPU Reset) 1x Audio In/Out 1x IPEX antenna port 1x Micro SD slot Signed-off-by: Jackson Ming Hu <huming2207@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add flash size postfix to Widora neoMathias Kresin2018-01-237-60/+62
| | | | | | | | | | Rename the Widora neo by adding a flash size prefix. Move the common parts into a dtsi to be prepare everything for upcomming support of the 32MB version. Migrate the Widora neo to the generic board detection as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: generic: add 4.9 config optionHans Dedecker2018-01-241-0/+1
| | | | | | | | When CGROUPS is enabled the new option CONFIG_CGROUP_NET_CLASSID is selectable and not handled. Add this option to the 4.9 kernel configuration. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* vxlan: add options to enable and disable UDP checksumsMatthias Schiffer2018-01-242-3/+5
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* netifd: update to latest git HEADMatthias Schiffer2018-01-241-3/+3
| | | | | | af3cadb system-linux: VXLAN: add options to enable and disable UDP checksums Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: Fix GB-PC1 cpuclock againRosen Penev2018-01-241-1/+1
| | | | | | | The intended frequency is 900 MHz, not 90. Fixes: 7059ab48a6d5 ("ramips: fix cpuclock for the GB-PC1") Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ar71xx: fix MikroTik rb-nor-flash-16M-ac imageDaniel Golle2018-01-241-1/+1
| | | | | | | | | | | | | commit e15c63a375 ar71xx: add support for MikroTik RouterBOARD wAP G-5HacT2HnD (wAP AC) changed the existing rb-nor-flash-16M-ac image in a way that it would now only support the rb-wapg-5hact2hnd. The board show however rather be added to the existing boards in the rb-nor-flash-16M image template. Reported-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to latest git HEADHans Dedecker2018-01-231-3/+3
| | | | | | | 653629f trace: check asprintf() return value 67eb7e6 trace: add missing limits.h include Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: add support for ZBT-WE1226Daniel Golle2018-01-237-0/+132
| | | | | | | | MT7628NN (580MHz), 8MB SPI NOR, 64MB DDR2 RAM Everything except for the switch LEDs works great. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: Orange Pi R1: configure USB Ethernet controller.Hauke Mehrtens2018-01-221-0/+3
| | | | | | Now the USB port is the WAN port. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Orange Pi R1: Fix USB Ethernet and activate SPIHauke Mehrtens2018-01-222-0/+77
| | | | | | | | | The USB Ethernet is not working with the patches proposed for upstream, fix this and activate the SPI node as this board always has a SPI flash. Both patches are also targeted for upstream kernel 4.16 and 4.17. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: use upstream patch for Orange Pi R1Hauke Mehrtens2018-01-222-196/+105
| | | | | | | Instead of using our own device tree definitions use the one provided in the upstream kernel for 4.16. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: backport stmmac network patchesHauke Mehrtens2018-01-2211-0/+1391
| | | | | | | | Ethernet support was initial added in kernel 4.13, but deactivated before the final release. This is backports the changes which are activating it again from kernel 4.15. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Add support for kernel 4.14Hauke Mehrtens2018-01-226-12/+940
| | | | | | | This is based on the code for kernel 4.9, but a lot of 4.9 patches are backports from more recent kernel version and can be removed now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: refresh kernel configurationHauke Mehrtens2018-01-224-4/+2
| | | | | | | | Just refresh the sunxi kernel configuration. This also moves the CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG option to the config-4.9 file. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "kernel: add IEEE-1284 parallel port support"Jo-Philipp Wich2018-01-221-38/+5
| | | | | | | | | This reverts commit 666e9cf2220b11ccd024cad13ad54ca71d40c5b3. The change has not been build-tested on non-x86 targets and leads to stalled kernel builds due to unset configuration symbols there. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: update to latest git HEADJohn Crispin2018-01-221-4/+4
| | | | | | 846e20c procd: add timing to start/stop logging Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: add support for the MikroTik RB911-2Hn/5Hn boardsGabor Juhos2018-01-2211-3/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds support for the MikroTik RB911-2Hn (911 Lite2) and the RB911-5Hn (911 Lite5) boards: https://mikrotik.com/product/RB911-2Hn https://mikrotik.com/product/RB911-5Hn The two boards are using the same hardware design, the only difference between the two is the supported wireless band. Specifications: * SoC: Atheros AR9344 (600MHz) * RAM: 64MiB * Storage: 16 MiB SPI NOR flash * Ethernet: 1x100M (Passive PoE in) * Wireless: AR9344 built-in wireless MAC, single chain 802.11b/g/n (911-2Hn) or 802.11a/g/n (911-5Hn) Notes: * Older versions of these boards might be equipped with a NAND flash chip instead of the SPI NOR device. Those boards are not supported (yet). * The MikroTik RB911-5HnD (911 Lite5 Dual) board also uses the same hardware. Support for that can be added later with little effort probably. Installation: 1. Setup a DHCP/BOOTP Server with the following parameters: * DHCP-Option 66 (TFTP server name): pointing to a local TFTP server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name): matching the initramfs filename of the to be booted image. The usable intramfs files are: - openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf - openwrt-ar71xx-mikrotik-vmlinux-initramfs-lzma.elf - openwrt-ar71xx-mikrotik-rb-nor-flash-16M-initramfs-kernel.bin 2. Press the reset button on the board and keep that pressed. 3. Connect the board to your local network via its ethernet port. 4. Release the button after the LEDs on the board are turned off. Now the board should load and start the initramfs image from the TFTP server. 5. Upload the sysupgrade image to the board with scp: $ scp openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/fw.bin 5. Log in to the running system listening on 192.168.1.1 via ssh as root (without password): $ ssh root@192.168.1.1 7. Flash the uploaded firmware file from the ssh session via the sysupgrade command: root@OpenWrt:~# sysupgrade /tmp/fw.bin Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: make leds-gpio usable with single-ended GPIOsGabor Juhos2018-01-222-0/+90
| | | | | | | | | Add patches for the leds-gpio driver to make it usable with open-drain and open-source kind of GPIO lines. This type of functionality is required by various MikroTik boards. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: mach-rbspi: return rb_info from rbspi_platform_setupGabor Juhos2018-01-221-13/+13
| | | | | | | | | | | | Modify the rbspi_platform_setup() function to return the pointer of the rb_info structure. This allows board specific setup routines to access the various fields of the information. It is useful for investigating the hardware option bits for example. Also update the board setup codes, to ensure that those handle the new return value correctly. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: add definitions for RouterBOARD hardware option bitsGabor Juhos2018-01-221-0/+26
| | | | | | | | | | | | Add bit definitions for the 'hardware options' tag which is used in the MikroTik devices' hardware configurations. These values can be used in board setup codes, to do different initialization sequences. The values were obtained from the RouterOS 6.41-rc38 patches. Additionally, introduce two helper functions what make the processing of the hardware options easy. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* uqmi: silence error on pin verificationKoen Vandeputte2018-01-221-1/+1
| | | | | | | | | | | | If a device only supports the 2nd verification method (uim), the first method will fail as expected reporting an error: "Command not supported" Silence both separate methods and only report an error regarding pin verification if both fail. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add IEEE-1284 parallel port supportDaniel Gimpelevich2018-01-221-5/+38
| | | | | | | | | | The kmod-lp package included both lp.ko and ppdev.ko, but ECP device drivers may or may not require lp NOT to be loaded, needing only ppdev. Additionally, There were no packages for any parport interface modules, such as uss720 or parport_pc, provided here. It has not been otherwise possible to use PC-style parport hardware for kmod-lp. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* pistachio: make patches apply againHauke Mehrtens2018-01-201-2/+2
| | | | | | | | Support for Winbond NAND flash detection was added into the generic patches and this conflicted with this patch adding Gigadevice support. Fixes: 02050f7e7d5b ("kernel/4.{4, 9}: add manufacturer ID for Winbond NANDs") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq806x: make patches apply againHauke Mehrtens2018-01-201-18/+0
| | | | | | | | Some part of this patch was added to the generic patches as it was needed also for some other target. Do not add it here any more. Fixes: 02050f7e7d5b ("kernel/4.{4, 9}: add manufacturer ID for Winbond NANDs") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: Add CONFIG_RETPOLINE to fix buildHauke Mehrtens2018-01-202-6/+7
| | | | | | | | | This adds support for the new configuration option CONFIG_RETPOLINE and refreshes the configuration. Fixes: d8565a06dc ("kernel: bump 4.9 to 4.9.77") Fixes: 9ddfac8015 ("kernel: bump 4.14 to 4.14.14") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: use upstream patches for muslHauke Mehrtens2018-01-2023-781/+833
| | | | | | | | | | This replaces the current patches used to make the kernel headers compatible with musl with the version which was accepted upstream. This is included in upstream kernel 4.15. This was compile tested with iproute2 build on all supported kernel versions with musl and one one with glibc. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ubus: fix PKG_MIRROR_HASHHauke Mehrtens2018-01-201-1/+1
| | | | | Fixes: dd975d15a71f ("ubus: fix wrong PKG_SOURCE_DATE") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* nftables: update to 0.8.1Philip Prindeville2018-01-202-81/+6
| | | | | | | Note this requires libnftnl-1.0.8 or higher, so that update needs to be merged first. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* libnftnl: update to 1.0.9Philip Prindeville2018-01-201-7/+7
| | | | | | | | Also, drop unsupported configure options. Don't use git retrieve but released tarball instead. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: backport fix for nftables on big EndianHauke Mehrtens2018-01-201-0/+323
| | | | | | | | | | | nftables 0.8.1 generates some new commands which will not work without this on big endian systems. This patch is included in Linux 4.11 and later. My rule matching a TCP port was not working: nft add rule ip foo bar ct state new tcp dport 22 accept Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/tar: update to 1.30Hannu Nyman2018-01-204-36/+16
| | | | | | update GNU tar to 1.30 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: bump 4.4 to 4.4.112Kevin Darbyshire-Bryant2018-01-2012-165/+19
| | | | | | | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: target/linux/generic/patches-4.4/030-2-smsc75xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/patches-4.4/030-3-cx82310_eth-use-skb_cow_head-to-deal-with-cloned-skb.patch target/linux/generic/patches-4.4/030-4-sr9700-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/patches-4.4/030-5-lan78xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch CVEs completely or partially addressed: CVE-2017-5715 CVE-2017-5753 CVE-2017-17741 CVE-2017-1000410 Compile-tested: ar71xx Archer C7 v2 Run-tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.9 to 4.9.77Kevin Darbyshire-Bryant2018-01-2029-395/+245
| | | | | | | | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: target/linux/generic/backport-4.9/023-2-smsc75xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/backport-4.9/023-3-cx82310_eth-use-skb_cow_head-to-deal-with-cloned-skb.patch target/linux/generic/backport-4.9/023-4-sr9700-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/backport-4.9/023-5-lan78xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch CVEs completely or partially addressed: CVE-2017-5715 CVE-2017-5753 CVE-2017-17741 CVE-2017-1000410 Compile-tested: ar71xx Archer C7 v2 Run-tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.14Kevin Darbyshire-Bryant2018-01-203-14/+14
| | | | | | | | | | | | | | Refresh patches. CVEs completely or partially addressed: CVE-2017-5715 CVE-2017-5753 CVE-2017-17741 CVE-2017-1000410 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel/4.{4, 9}: add manufacturer ID for Winbond NANDsGabor Juhos2018-01-203-1/+69
| | | | | | | | | | | | | | | | | | | Some MikroTik devices are using a Winbond NAND flash. Linux treats it as an unknown NAND before version 4.11: nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1 nand: Unknown NAND 128MiB 3,3V 8-bit nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Backport a patch from 4.11 to show the manufacturer correctly: nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1 nand: Winbond NAND 128MiB 3,3V 8-bit nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Tested on a MikroTik R951Ui-2HnD board. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* dnsmasq: backport validation fix in dnssec security fixKevin Darbyshire-Bryant2018-01-202-2/+2
| | | | | | | | A DNSSEC validation error was introduced in the fix for CVE-2017-15107 Backport the upstream fix to the fix (a simple typo) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: backport dnssec security fixKevin Darbyshire-Bryant2018-01-192-1/+203
| | | | | | | | | | | | | | | | | | | | | | | | | CVE-2017-15107 An interesting problem has turned up in DNSSEC validation. It turns out that NSEC records expanded from wildcards are allowed, so a domain can include an NSEC record for *.example.org and an actual query reply could expand that to anything in example.org and still have it signed by the signature for the wildcard. So, for example !.example.org NSEC zz.example.org is fine. The problem is that most implementers (your author included, but also the Google public DNS people, powerdns and Unbound) then took that record to prove the nothing exists between !.example.org and zz.example.org, whereas in fact it only provides that proof between *.example.org and zz.example.org. This gives an attacker a way to prove that anything between !.example.org and *.example.org doesn't exists, when it may well do so. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ipq806x: remove merged ipq4019 patchChristian Lamparter2018-01-1811-39/+11
| | | | | | | | | The patch 0022-dts-ipq4019-support-ARMv7-PMU.patch was merged into 4.8-rc1. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refresh patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: remove dependency on non-existent kmodChristian Lamparter2018-01-181-1/+1
| | | | | | | | During the integration of the ipq40xx target, the phy drivers were included into the ipq806x's target kernel config. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq-wifi: align AVM FRITZ!Box 4040's board-2.bin packageChristian Lamparter2018-01-183-3/+3
| | | | | | | This patch renames the AVM FRITZ!Box 4040's board-2.bin file and package to match the 'vendor_product' format. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq806x: overhaul AVM FRITZ!box 4040 device-tree fileChristian Lamparter2018-01-181-38/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch aligns the device-tree file with the latest guidelines. - No longer include qcom-ipq4019-ap.dk01.1.dtsi. This file is only partially upstream and therefore subjected to changes that might not be compatible with the board. As a result, the definitions from the file have been copied into this dts. - exclusively use decimal GPIO addresses. - reorganize the reserved-memory layout to waste less memory. There's no point in keeping the u-boot loader around. This should also make it possible to create an image that will boot with the original EVA/ADAM2 loader without needing to install the modified u-boot loader. And finally mark the "tz-apps" as reusable. There isn't a way to upload apps to the trust-zone in OpenWrt yet. But it might see some use in the future as a "secure" key-store/TPM. - sort the first-level nodes alphabetically. - sort nodes with an address by the address. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update QCA988x firmware to 10.2.4-1.0-00033Christian Lamparter2018-01-181-1/+1
| | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.2.4-1.0-00033 firmware for the QCA988x. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update QCA9887 firmware to 10.2.4-1.0-00033Christian Lamparter2018-01-181-1/+1
| | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.2.4-1.0-00033 firmware for the QCA9887. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 20:17:13 +0000