aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq-wifi: drop OpenMesh A42 board-2.binSven Eckelmann2018-02-113-3/+2
| | | | | | | | | | | The BDFs for OpenMesh A42 were upstreamed [1] to the ath10k-firmware repository and are now part of ath10k-firmware 2018-01-26. The ipq-wifi-openmesh_a42 package can now be dropped because OpenWrt already ships the QCA4019 board-2.bin from this version. [1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* firmware: ath10k-firmware: update to 2018-01-26Sven Eckelmann2018-02-111-3/+3
| | | | | | | | | * introduces the BDFs for the OpenMesh A42 in /lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin. * adds new firmware firmware-6.bin_RM.4.4.1.c1-00037-QCARMSWP-1 for QCA6174 hw3.0 Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx:add support for COMFAST CF-E375ACDing Tengfei2018-02-1111-1/+139
| | | | | | | | | | | | | | | | | | | | | | | | COMFAST CF-E375AC is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337. Short specification: 2x 10/100/1000 Mbps Ethernet, with PoE support 128MB of RAM (DDR2) 16 MB of FLASH 3T3R 2.4 GHz, 802.11b/g/n 2T2R 5 GHz, 802.11ac/n/a, wave 2 built-in 5x 3 dBi antennas output power (max): 500 mW (27 dBm) 1x RGB LED, 1x button built-in watchdog chipset Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei <dtf@comfast.cn>
* ar71xx: remove bs-partition ro-flag for UniFi ACDavid Bauer2018-02-111-1/+1
| | | | | | | | | | | | This removes the read-only flag from the bs (bootselect) partition on UniFi AC devices. This allows to correct the indicator from which partition the device is booting its kernel from. See also: - https://github.com/freifunk-gluon/gluon/issues/1301 - https://bugs.lede-project.org/index.php?do=details&task_id=662 Signed-off-by: David Bauer <mail@david-bauer.net>
* kexec-tools: bump version to 2.0.16Philip Prindeville2018-02-115-245/+3
| | | | | | All patches have been integrated upstream. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kexec-tools: issue warning when dd'ing vmcorePhilip Prindeville2018-02-112-1/+3
| | | | | | | | With no warning, it just looks like the box has hung during boot. We don't want users resetting it without having captured a crashdump. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* ramips: add support for TP-Link Archer C50 v3Henryk Heisig2018-02-116-0/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C50 v3 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7612E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Flash instruction: The only way to flash LEDE image in ArcherC50v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC50v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: ArcherC20v4: use common TP-Link dtsi fileHenryk Heisig2018-02-111-72/+3
| | | | | | and remove common part from dts file. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: change the TP-Link dtsi filenameHenryk Heisig2018-02-114-3/+3
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* kernel: mtdsplit: Add support for D-link JBOOTPawel Dembicki2018-02-117-0/+287
| | | | | | | | | The D-Link devices with JBOOT bootloader use their own kernel image header (stag + sch2 headers). This driver find jImage header and set rootfs start after kernel file. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ipq806x: mark AVM FB4040 switchport as untaggedDavid Bauer2018-02-111-1/+1
| | | | | | | | This commit marks the CPUs switchport explicit as untagged. Otherwise, an eth0.1 interface is created and the devices LAN-ports are not working. Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: add preinit hook to reload microcodeZoltan HERPAI2018-02-111-0/+10
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: add microcode package for IntelZoltan HERPAI2018-02-111-0/+49
| | | | | | | | | | | | | | | | Compiling the Intel microcode package results in a microcode.bin and a microcode-64.bin. As we can decide based on the subtarget which should be used, we'll only split the required .bin file with iucode-tool. x64 will get the intel-microcode-64.bin All other variants will get intel-microcode.bin The microcodes will be updated from preinit via a common script - that's the earliest place where we can do it. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: add microcode package for AMDZoltan HERPAI2018-02-111-0/+45
| | | | | | | | | | | Use the Debian repository for sourcing the ucode files. Current (20171205) includes support for fam17h CPUs already. The microcodes will be updated from preinit via a common script - that's the earliest place where we can do it. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* tools: add iucode-toolZoltan HERPAI2018-02-111-0/+47
| | | | | | | | | | | | Add tool to "compile" Intel microcode files. The tool will be compiled for host (to split the microcode.dat) and for target (to forcibly reload the microcode if required). Instead of using the large microcode.bin/microcode-64.bin, the splitted ucode files (separate for CPU families) will be installed. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* x86: enable microcode loading for Intel and AMDZoltan HERPAI2018-02-112-2/+8
| | | | | | Enable for 4.9 and 4.14. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* fstools: update to latest git HEADJohn Crispin2018-02-111-3/+3
| | | | | | | | 3d23981 strip trailing spaces from vfat labels c4a3c97 fix vfat volume label 5010710 block: support /dev/nvme* nodes Signed-off-by: John Crispin <john@phrozen.org>
* uboot-fritz4040: Fix build with HOSTCFLAGSHauke Mehrtens2018-02-111-1/+1
| | | | | | | | | | | | When we provide the HOSTCFLAGS to the U-Boot build it will fail because it can not find the u-boot provided header files any more. Just overwrite and not append the package specific configuration on top of the configuration provided by u-boot.mk. uboot-fritz4040 is based on U-Boot 2012.07 and this problem is probably similar to the problem seen with the lantiq and ar71xx u-boot build. Fixes: df9781a4205 ("u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variable") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: Orders the names of the devices alphabetically.Arne Zachlod2018-02-113-176/+176
| | | | Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* imx6: use DTS_DIR at image build codeAdrià Llaudet2018-02-101-1/+1
| | | | | | | | | Use "$(DTS_DIR)", defined at include/image.mk, instead of "$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts" in order to generalize and allow a better Device/* device-tree parameterization (i.e. DEVICE_DTS_DIR and DTS_DIR). Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
* archs38: bump kernel to 4.14.Evgeniy Didin2018-02-103-26/+28
| | | | | | | | | Update Linux kernel version from 4.9 to 4.14 for archs38. config-4.14 was simply regenerated with "make kernel_menuconfig". Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org>
* kernel: backport fix undefined abortEvgeniy Didin2018-02-102-0/+125
| | | | | | | | | | | | | | | | | | | While building mpi.ko module with stable Linux v4.14.14 an error occured: >ERROR: "abort" [lib/mpi/mpi.ko] undefined! In upstream Linux 4.15 this issue is fixed: Commit 7c2c11b208be ("arch: define weak abort()") https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7c2c11b208be09c156573fc0076b7b3646e05219 Commit dc8635b78cd8 ("kernel/exit.c: export abort() to modules") https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=dc8635b78cd8669c37e230058d18c33af7451ab1 So lets add backport patches until these fixes are not applied in stable version. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> CC: John Crispin <john@phrozen.org> CC: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-fouFilip Moc2018-02-101-0/+22
| | | | | | | | | Once installed fou kernel module allows you to use FOU (Foo over UDP) and GUE (Generic UDP encapsulation) tunnel protocols. To get ip fou command working you also need to install ip-full. Signed-off-by: Filip Moc <lede@moc6.cz>
* uboot-mvebu: fix build ; use the build's tools/libresslAlexandru Ardelean2018-02-103-251/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since I have no openssl-dev on my machine, I first get this error: ``` tools/kwbimage.c:21:10: fatal error: openssl/bn.h: No such file or directory #include <openssl/bn.h> ``` After removing the UBOOT_MAKE_FLAGS the next error is: ``` tools/kwbimage.c:40:6: error: conflicting types for ‘EVP_MD_CTX_cleanup’ void EVP_MD_CTX_cleanup(EVP_MD_CTX *ctx) ``` After removing the OpenSSL patches the next error is: ``` HOSTLD tools/dumpimage /usr/bin/ld: cannot find -lssl /usr/bin/ld: cannot find -lcrypto collect2: error: ld returned 1 exit status scripts/Makefile.host:108: recipe for target 'tools/dumpimage' failed make[5]: *** [tools/dumpimage] Error 1 ``` So, the final part is to add the build system's HOST_LDFLAGS to the UBOOT_MAKE_FLAGS. (which was done in the previous commit) Then the image builds. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* u-boot.mk: add HOST_LDFLAGS to UBOOT_MAKE_FLAGSAlexandru Ardelean2018-02-101-1/+1
| | | | | | | | This will make sure that the build system's paths for linking are available. This is needed mostly for linking with tools/libressl. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variableAlexandru Ardelean2018-02-102-2/+2
| | | | | | | | | | | | | | | | | This would should up as `$$(HOSTCPPFLAGS)` in the host CFLAGS. ``` make --jobserver-fds=3,4 -j -C <openwrt>/build_dir/target-arm_cortex-a8+vfpv3_musl_eabi/u-boot-A10-OLinuXino-Lime/u-boot-2017.07 CROSS_COMPILE=arm-openwrt-linux-muslgnueabi- DTC="<openwrt>/build_dir/target-arm_cortex-a8+vfpv3_musl_eabi/linux-sunxi_cortexa8/linux-4.9.76/scripts/dtc/dtc" HOSTCC="gcc" HOSTCFLAGS='-O2 -I<openwrt>/staging_dir/host/include -I<openwrt>/staging_dir/host/usr/include -I<openwrt>/staging_dir/hostpkg/include -I<openwrt>/staging_dir/target-arm_cortex-a8+vfpv3_musl_eabi/host/include $$(HOSTCPPFLAGS)' HOSTLDFLAGS="" BL31=<openwrt>/staging_dir/target-arm_cortex-a8+vfpv3_musl_eabi/image/bl31.bin ``` And then it would complain with: ``` /bin/sh: 1: HOSTCPPFLAGS: not found ``` Also, HOSTCPPFLAGS does not exist. The correct var is HOST_CPPFLAGS. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* valgrind: Fix compile on ARM64Hauke Mehrtens2018-02-101-2/+7
| | | | | | | Activate the support for 64 bit on all 64 bit CPUs and not only x86_64. ARM64 does not provide an xml file, so do not pack any. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bunwind: build for ARM64Hauke Mehrtens2018-02-101-1/+1
| | | | | | | ARM64 is supported by libunwind since some versions, allow building it for aarch64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* config: fix ARM64 dependency checkHauke Mehrtens2018-02-101-2/+2
| | | | | | The ARM64 CPUs use aarch64 config symbol, fix the depends lines. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: gdb: activate on ARM64Hauke Mehrtens2018-02-101-1/+0
| | | | | | | gdb supports ARM64 since quite some time now, activate it there like on other CPU architectures. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: rename CONFIG_TRACE_ENUM_MAP_FILE to CONFIG_TRACE_EVAL_MAP_FILEHauke Mehrtens2018-02-101-1/+1
| | | | | | | | This config option was renamed in upstream Linux commit 681bec0367 ("tracing: Rename update the enum_map file") Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: fix build by adding comparabilities for old dtcHauke Mehrtens2018-02-101-0/+52
| | | | | | | We use the dtc from the kernel and that does not have all the options which u-boot would like to use now. make these parameters optional. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: refresh patchesHauke Mehrtens2018-02-106-10/+10
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest version, fixes mt7603 stability issuesFelix Fietkau2018-02-091-3/+3
| | | | | | | | 3413961 mt7603: avoid reordering qos-null data packets c60e6db mt76: toggle driver station powersave bit before notifying mac80211 246d548 mt76: stop tx queues from the driver callback instead of common code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove kmod-spi-gpio-oldFelix Fietkau2018-02-091-16/+0
| | | | | | It is unused and has been deprecated for a long time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wrt55agv2-spidevs: mark as brokenFelix Fietkau2018-02-091-1/+1
| | | | | | | The target it was meant for was updated to a version that this does not compile with. It probably also hasn't been used in years Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ixp4xx: remove linux 4.4 supportFelix Fietkau2018-02-0942-9726/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: switch to kernel 4.14Stijn Tintel2018-02-081-1/+1
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.14 to 4.14.18Stijn Tintel2018-02-089-101/+30
| | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - apm821xx/010-crypto-gcm-add-GCM-IV-size-constant.patch - backport/040-crypto-fix-typo-in-KPP-dependency-of-CRYPTO_ECDH.patch Remove pending-4.14/650-pppoe_header_pad.patch, it is superseded by upstream commit d32e5740001972c1bb193dd60af02721d047a17e. Update patch that no longer applies: hack/204-module_strip.patch Compile-tested: octeon, x86/64. Runtime-tested: octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* odhcp6c: fix appending of emtpy sendopt value (FS#1336)Hans Dedecker2018-02-082-2/+2
| | | | | | | | Don't append an empty sendopts value as odhcp6c bails out immediately on an empty -x option triggering an infinite start loop of odhcp6c Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* libubox: bump to git HEAD versionHans Dedecker2018-02-081-3/+3
| | | | | | b0c830 sh/jshn.sh: add json_for_each_item() Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: change sendopts option into listHans Dedecker2018-02-082-7/+9
| | | | | | | | Commit a26045049b added support for sendopts as a string; since multiple sendopts values can be specified it makes more sense to model it as a list of strings. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEADHans Dedecker2018-02-071-3/+3
| | | | | | 1be329c netifd-proto: add proto_config_add_array wrapper Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools/ccache: update to 3.3.6Hannu Nyman2018-02-072-3/+3
| | | | | | | | | Update ccache to 3.3.6 Release notes: https://ccache.samba.org/releasenotes.html#_ccache_3_3_6 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* uboot-sunxi: bump to 2017.11Zoltan HERPAI2018-02-0611-392/+36
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ramips: various fixes for zbt-we1226Daniel Golle2018-02-067-18/+15
| | | | | | | | | | | Convert userspace code to use generic device-tree compatible board detection method. Users of the existing code will have to use sysupgrade -F once to switch to the new generic board naming. Properly setup pinctrl fixing the switch port LEDs. Fixes commit 9c4fe103cb (ramips: add support for ZBT-WE1226) Reported-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ltq-atm: cleanup unused variables and functionsMartin Schiller2018-02-051-41/+0
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ltq-atm: rewrite tx path to use IRQsAlexander Couzens2018-02-052-46/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ATM subsystem is different from the generic ethernet NICs. The ATM subsystem requires a callback when a packet has been sent. It means a tx skb_buff need to be used after it has sent. While the generic NIC can fill up the TX ring and free skb_buffs if it encounter a ring buffer slot with an already sent skbuff. The ATM drivers need call the pop() function after it has send a single ATM package. The ATM subsystem controls via this ways the queuing. The ppe engine use DMA channels for read and write. Every atm_vcc has it's own TX DMA channel and each TX DMA channel has it's own ring buffer. The old driver had multiple issues: - Call the subsystem callback at the beginning of tx function (ppe_send). Didn't allowed the ATM subsystem to control the enqueued package amount. - Filled up the TX ring until full and fail futher - copy or decouple the skb from all other subsystem before giving it over to TX ring The new tx path uses interupts. - call the subsystem callback _after_ it was sent by hardware - no need to copy our decouple the skb any more - gives back control to the atm subsystem over the enqueued packages - use an interupt for every sent atm package Using interupts shouldn't be a problem because of the slow uplink bandwidth of ADSL. The speed _through_ the DSL router was always as high as it should be, only traffic generated on the router itself were affected. After changing to new tx path, the speed of iperf's run on the router itself reached the same speed. The master/trunk wasn't as much affected because of TCP optimisations (reboot-5022-gb2ea46fe236a). The following results are taken on the remote server, which receives the stream over the internet and the DSL line. The sync moves between every sync a litte bit, but is so far stable Latency / Interleave Delay: Down: Fast (0.25 ms) / Up: Fast (0.50 ms) Data Rate: Down: 13.287 Mb/s / Up: 1.151 Mb/s reboot-5521-g9f8d28285d without patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.04 sec 947 KBytes 773 Kbits/sec 0 sender [ 5] 0.00-10.04 sec 928 KBytes 757 Kbits/sec receiver reboot-5521-g9f8d28285d with patch [ 5] 0.00-10.06 sec 1.16 MBytes 970 Kbits/sec 0 sender [ 5] 0.00-10.06 sec 1.15 MBytes 959 Kbits/sec receiver v17.01.4-239-g55c23e44f4 without patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.04 sec 87.4 KBytes 71.3 Kbits/sec 0 sender [ 5] 0.00-10.04 sec 59.6 KBytes 48.7 Kbits/sec receiver v17.01.4-239-g55c23e44f4 with patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.05 sec 1.18 MBytes 983 Kbits/sec 1 sender [ 5] 0.00-10.05 sec 1.15 MBytes 959 Kbits/sec receiver Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* arm-trusted-firmware-sunxi: use release build and bump versionZoltan HERPAI2018-02-051-5/+4
| | | | | | | | | - use release build instead of debug to reduce size - bump to use latest commit in allwinner tree Tested on Pine64/1G. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mt76: update to the latest versionFelix Fietkau2018-02-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 2b7fae4 mt76: fix returnvar.cocci warnings 939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params() cf59170 mt76x2: dfs: add set_domain handler 5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params() f76e25f mt76x2: fix WMM parameter configuration 34d612d mt76: retry rx polling as long as there is budget left 0f8327a mt76x2: fix TSF value in probe responses ad3f8e9 mt76: add an intermediate struct for rx status information 58a41f1 mt76: get station pointer by wcid and pass it to mac80211 b0508d3 mt76: implement A-MPDU rx reordering in the driver code cf3cfc4 mt76: split mt76_rx_complete 461cdf9 mt76: pass the per-vif wcid to the core for multicast rx 9b2c778 mt76: validate rx CCMP PN 302af90 mt76x2: init: disable all pending tasklets during device removal 9f685fe mt7603: init: disable tbtt tasklet during device removal c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames 3968dae mt7603: fix 40 mhz channel bandwidth reporting 9c2e03d mt7603: fix rx LDPC reporting f515dfc mt76: implement AP_LINK_PS 974142c mt76: implement processing of BlockAckReq frames c5209db mt76: avoid re-queueing A-MPDU rx reorder work if no frames are pending e67e7a5 mt76x2: do not set status->aggr for NULL data frames 8693864 mt76: check qos ack policy before reordering packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 07:50:05 +0000