aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* x86: sysupgrade: move partition table change check to platform_check_imageMatthias Schiffer2017-05-291-4/+25
| | | | | | | The staged sysupgrade will prevent us from using ask_bool in platform_do_upgrade; therefore, the check is moved to platform_check_image. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: sysupgrade: move nand_do_upgrade call to platform_do_upgradeMatthias Schiffer2017-05-291-8/+1
| | | | | | | All targets with NAND support should gradually move their nand_do_upgrade calls from platform_pre_upgrade to platform_do_upgrade. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: add support for staged sysupgrades from failsafe modeMatthias Schiffer2017-05-293-10/+25
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: sysupgrade cleanupMatthias Schiffer2017-05-293-105/+102
| | | | | | | | | | | | Some functions only used by stage2 are moved there from common.sh. One piece that could still use more cleanup is platform_pre_upgrade: many targets reference files from there are aren't available in the ramfs, so we need to evaluate it before the switch; conversely, flash writes happen in that function on some targets. Targets that do the latter should be fixed eventually to use platform_do_upgrade for that purpose. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* fstools: snapshot: handle jffs2 conversion using upgradedMatthias Schiffer2017-05-292-7/+9
| | | | | | | We can reuse the kill_remaining and run_ramfs facilities of the stage2 run by upgraded. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* fstools: clean up trailing whitespace in snapshot scriptMatthias Schiffer2017-05-291-1/+1
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: always use staged sysupgradeMatthias Schiffer2017-05-294-148/+162
| | | | | | | | | | | Support for the -d and -p options is dropped; it may be added again at some point by adding these flags to the ubus sysupgrade call. A downside of this is that we get a lot less information about the progress of the upgrade: as soon as the actual upgrade starts, all shell sessions are killed to allow unmounting the root filesystem. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: remove procd-nand packageMatthias Schiffer2017-05-294-61/+14
| | | | | | | | | | | We always want to support staged upgrades now, so it's better to include upgraded into the main package. /lib/upgrade/nand.sh is moved to base-files. The procd-nand-firstboot package is removed for now, it may return later as a separate package. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: update to latest git HEADMatthias Schiffer2017-05-291-3/+3
| | | | | | | | | | | | | | | | 992b796 rcS: add missing fcntl.h include 63789e5 init: add support for sysupgrades triggered from preinit 5b1fb35 Remove code that has become unnecessary after sysupgrade changes 5918b6d upgraded: add support for passing a "command" argument to stage2 056d8dd upgraded: link dynamically, chroot during exec 7c6cf55 system: always support staged sysupgrade d42b21e procd/rcS: Use /dev/null as stdin e0098d4 service/instance: add an auto start option 1247db1 procd: Log initscript output prefixed with script name 8d720b2 procd: Don't use syslog before its initialization 2555474 procd: Add missing \n in debug message Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: prepare NAND sysupgrade for making upgraded dynamically linkedMatthias Schiffer2017-05-291-2/+3
| | | | | | | | Use install_bin to copy upgraded with all dependencies. The old name /tmp/upgraded is temporarily retained as a symlink to avoid breaking things. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: clean up trailing whitespace in nand.shMatthias Schiffer2017-05-291-2/+2
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mt76: update to the latest version, improves mt7603/7628 stabilityFelix Fietkau2017-05-291-4/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: fix kmod package build on non-GNU systemsFelix Fietkau2017-05-291-1/+1
| | | | | | | BSD paste requires a filename argument, and it accepts - to use stdin as intended. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/sparse: Update to snapshot 2017-03-31Daniel Engberg2017-05-291-4/+4
| | | | | | | Update sparse to snapshot 2017-03-31 Switch to HTTPS Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* toolchain/insight: Remove from treeDaniel Engberg2017-05-294-91/+1
| | | | | | | | Insight hasn't been touched since 2009 and I can't find any references at least 6 years back of being used. Ubuntu and Debian removed insight years ago from their repos so I think we can safely remove this too. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* lantiq: pinctrl: xway: fix copy/paste error in xrx200_grpsMartin Schiller2017-05-292-1/+12
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ipq806x: add qpic nand and bam dma node's in ipq4019 dts treeRam Chandra Jangir2017-05-291-0/+172
| | | | | | | This change adds QPIC BAM dma and NAND driver node's in IPQ4019 device tree, also enable this for AP-DK04.1 based boards. Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
* ipq806x: Add support for custom data mapping in bam_dma dmaengineRam Chandra Jangir2017-05-291-0/+217
| | | | | | | This change adds a new function to support for preparing DMA descriptor for custom data. Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
* ipq806x: Added bam transaction and support additional CSRsRam Chandra Jangir2017-05-291-0/+1273
| | | | | | | | | This change adds support for below: - Bam transaction which will be used for any NAND request. - Reset function for NAND BAM transaction - Add support for additional CSRs. Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
* ipq806x: Add bam_dma support in qcom_nand driverRam Chandra Jangir2017-05-291-0/+382
| | | | | | | | | The existing qcom_nand driver supports ADM DMA which is mainly required for ipq806x family based boards, IPQ40xx based boards uses BAM DMA in NAND driver, so this patch adds BAM DMA support with compatible string as qcom,ebi2-nandc-bam. Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
* ipq806x: Add support to configure ipq40xx GPIO_PULL bitsRam Chandra Jangir2017-05-291-0/+260
| | | | | | | | | | GPIO_PULL bits configurations in TLMM_GPIO_CFG register differs for IPQ40xx from rest of the other qcom SoC's. This change add support to configure the msm_gpio_pull bits for ipq40xx, It is required to fix the proper configurations of gpio-pull bits for nand pins mux. Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
* firewall: fix stray continue statementJo-Philipp Wich2017-05-271-4/+4
| | | | | | | The previous commit introduced a faulty continue statement which might lead to faulty rules not getting freed or reported. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netifd: fix 6rd regression (FS#812)Hans Dedecker2017-05-271-3/+3
| | | | | | 08f1875 system-linux: fix 6rd regression Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* firewall: extend ubus support, exception handling, parse fixesJo-Philipp Wich2017-05-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Update to latest Git HEAD in order to import a number of fixes and other improvements: 3d2c18a options: improve handling of negations when parsing space separated values 0e5dd73 iptables: support -i, -o, -s and -d in option extra 4cb06c7 ubus: increase ubus network interface dump timeout e5dfc82 iptables: add exception handling f625954 firewall3: add check_snat() function 7d3d9dc firewall3: display the section type for UBUS rules 53ef9f1 firewall3: add UBUS support for include scripts 5cd4af4 firewall3: add UBUS support for ipset sections 02d6832 firewall3: add UBUS support for forwarding sections 0a7d36d firewall3: add UBUS support for redirect sections d44f418 firewall3: add fw3_attr_parse_name_type() function e264c8e firewall3: replace warn_rule() by warn_section() 6039c7f firewall3: check the return value of fw3_parse_options() Fixes FS#548, FS#806, FS#811. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm47xx: remove target specific network preinit configJo-Philipp Wich2017-05-272-32/+0
| | | | | | | | | The generic preinit code is now able to setup network and switch vlan settings from the /etc/board.json file, therefor drop the target specific code. Fixes FS#790. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* samba: bump PKG_RELEASEJo-Philipp Wich2017-05-271-1/+1
| | | | | | | | | | | The previous CVE bugfix commit did not adjust PKG_RELEASE, therefor the fixed samba package does not appear as opkg update. Bump the PKG_RELEASE to signify upgrades to downstream users. Ref: https://forum.lede-project.org/t/sambacry-are-lede-devices-affected/3972/4 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: fix build of geode targetHauke Mehrtens2017-05-271-0/+1
| | | | | | The build bot complained that the OLPC option was not set. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add missing config optionsHauke Mehrtens2017-05-272-0/+5
| | | | | | | This broke the build for the x86 generic target. This was found by the build bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Move enablemodem from ramips to new package adb-enablemodem and make it used ↵Filip Moc2017-05-275-19/+92
| | | | | | also by TL-MR6400 Signed-off-by: Filip Moc <lede@moc6.cz>
* ar71xx: Add support for TP-Link MR6400Filip Moc2017-05-2713-0/+197
| | | | | | | | | | | | | | | | | You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin on 192.168.0.66/24, connect to any ethernet port and power on device while holding the reset button). Flashing via OEM web interface does not work. Hardware Specification (v1.0 EU): - SoC: QCA9531 - Flash: Winbond W25Q64FV (8MiB) - RAM: EtronTech EM6AB160TSE-5G (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 2NIC (3x100M + 1x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 12V 1A Signed-off-by: Filip Moc <lede@moc6.cz>
* ramips: remove fictional LEDs from AsiaRF AWM00x device treeRussell Senior2017-05-271-14/+0
| | | | | | | | | Neither the AsiaRF AWM002 or AWM003 actually has an LED on the module board. The ld1 and ld2 do not represent actual LEDs. These pins might connect to LEDS on an eval board or other carrier board, but that is outside the scope of this device tree file. Signed-off-by: Russell Senior <russell@personaltelco.net>
* usbmode: update usb-modeswitch-data to 20170205Julian Labus2017-05-271-2/+2
| | | | | | add support for new hardware Signed-off-by: Julian Labus <julian@labus-online.de>
* usbmode: update to latest versionJulian Labus2017-05-271-3/+3
| | | | | | 453da8e convert-modeswitch.pl: fix message indices Signed-off-by: Julian Labus <julian@labus-online.de>
* build: fix possible issue with kmod package having multiple AutoLoad'sYousong Zhou2017-05-271-9/+12
| | | | | | | | | | | This commit contains the following changes - Use local shell var where appliable - The $(sort $$$$$$$$mods) call will have no expected effect - Avoid EEXIST when creating symlinks in /etc/modules-boot.d/ - Avoid duplicate arguments for insert_modules() in postinst-pkg Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: update kernel 4.4 to 4.4.70Hauke Mehrtens2017-05-271-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update kernel 4.9 to 4.9.30Hauke Mehrtens2017-05-2711-15/+15
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uml: Fix sample command lineFlorian Fainelli2017-05-261-2/+2
| | | | | | Provide paths that match where LEDE is staging images. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* uml: Check for glibc static librariesFlorian Fainelli2017-05-261-0/+11
| | | | | | | | UML statically links against libutil, librt and libpthread. Some hosts do not necessarily have these libraries installed and we should find out sooner than later (during the final vmlinux linking stage) about that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel: Make KERNEL_PERF_EVENTS selectableFlorian Fainelli2017-05-261-1/+1
| | | | | | | The kernel itself allows enabling/disabling CONFIG_PERF_EVENTS, so allow doing the same thing. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel: Hide kernel options behind a menuFlorian Fainelli2017-05-261-1/+3
| | | | | | | | We are starting to add more and more kernel configurable options, to the point where the Global build options menu is not really usable anymore, hide all kernel-related configuration options behind a menu. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* elfutils: Pass -Wno-unused-result to silence warnings as errorsFlorian Fainelli2017-05-261-1/+1
| | | | | | | | | | | | | | | | | | | elfutils turns on -Werror by default, and patch 100-musl-compat.patch changes how strerror_r is used and we no longer use the function's return value. This causes the following build error/warning to occur with glibc-based toolchains: dwfl_error.c: In function 'dwfl_errmsg': dwfl_error.c:158:18: error: ignoring return value of 'strerror_r', declared with attribute warn_unused_result [-Werror=unused-result] strerror_r (error & 0xffff, s, sizeof(s)); ^ cc1: all warnings being treated as errors Fixing this would be tricky as there are two possible signatures for strerror_r (XSI and GNU), just turn off unused-result warnings instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* dnsmasq: add dhcp-script hook for other packagesNick Brassel2017-05-263-5/+59
| | | | | | | | | | | | | Adds a script which acts as a hook for when dnsmasq creates/destroys a lease, or completes a TFTP file transfer. The hook loops through scripts in appropriate directories inside '/etc/hotplug.d', executing each one with the same arguments supplied by dnsmasq. In case dnsmasq is jailed by ujail the dhcp-script hook will not work as expected as ujail does not yet support executing a script within a jail. Signed-off-by: Nick Brassel <nick@tzarc.org> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* treewide: fix device tree path in scriptsMathias Kresin2017-05-262-2/+2
| | | | | | | | The device tree is at /proc/device-tree/ without a base subdir. Fixes: da472e5b30f6 ("treewide: access device tree from userspace via /proc/") Signed-off-by: Mathias Kresin <dev@kresin.me>
* Revert "sysupgrade: run only one instance at a time."Jo-Philipp Wich2017-05-261-14/+0
| | | | | | | | | | | | | This reverts commit e96a9a9af82c00dcce606a84a7bb87a00411385d. The change breaks sysupgrade through LuCI and two-stage sysupgrade on NAND targets. There is also a mismatch of file paths in lock and unlock operations. This commit was apparently neither properly tested, nor reviewed, so drop it for now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add support for GL-inet GL-MT300N-V2Kyson Lok2017-05-267-0/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the GL-inet GL-MT300N-V2. Specification: - SoC: MediaTek MT7628AN - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR - Ethernet: 1 x WAN (100 Mbps) and 1 x LAN (100 Mbps) - USB: 1 x USB 2.0 port - Button: 1 x switch button, 1 x reset button - LED: 3 x LEDS (system power led is not GPIO controller) - UART: 1 x UART on PCB (JP1: 3.3V, RX, TX, GND) Installation through Luci: - The original firmware is LEDE, so both LuCI or sysupgrade can be used. - Do not keep settings, for sysupgrade please use the -n option. Installation through bootloader webserver: - Plug power and hold reset button until red LED blink to bright. - Install sysupgrade image using web interface on 192.168.1.1. Signed-off-by: Kyson Lok <kysonlok@gmail.com> [match maximum image size with firmware partition] Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: access device tree from userspace via /proc/Mathias Kresin2017-05-262-2/+2
| | | | | | | Access the device tree via /proc/device-tree/ is the documented way to access the properties. Everything else might not work in future. Signed-off-by: Mathias Kresin <dev@kresin.me>
* flex: update to 2.6.4 (FS#809)Eric Luehrsen2017-05-261-3/+3
| | | | | | flex 2.6.3 has a bug which fails code generation and compile of some packages Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
* x86/legacy: disable PAE againDaniel Golle2017-05-251-1/+1
| | | | | | | | | | | commit 961c0eacea ('x86: fix lifting kernel CPU requirements and always enable PAE') broke some older geode boards such as Soekris net4826. Hence disable PAE on x86/legacy again in order to still support those very old non-PAE capable CPUs. Fixes FS#773 - PAE broke Soekris net4826 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: fix QUILT related overridesFelix Fietkau2017-05-251-10/+12
| | | | | | They need to be defined before including quilt.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iptables: fix typos in 600-shared-libext.patch (FS#711)Felix Fietkau2017-05-251-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 07:42:55 +0000