aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Add support for Ubiquity Bullet M (XW)Petr Štetiar2019-04-088-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU: AR9342 SoC RAM: 64 MB DDR2 Flash: 8 MB NOR SPI Ports: 100 MBit (24V PoE in) WLAN: 2.4/5 GHz UART: 1 UART on PCB marked as J1 with 115200 8N1 config LEDs: Power, Ethernet, 4x RSSI LEDs (orange, red, 2x green) Buttons: Reset UART connection details .---------------------------------. | | [ETH] J1 [ANT] | o VCC o RX o TX o GND | `---------------------------------' Flashing instructions using recovery method over TFTP 1. Unplug the ethernet cable from the router. 2. Using paper clip press and hold the router's reset button. Make sure you can feel it depressed by the paper clip. Do not release the button until step 4. 3. While keeping the reset button pressed in, plug the ethernet cable back into the AP. Keep the reset button depressed until you see the device's LEDs flashing in upgrade mode (alternating LED1/LED3 and LED2/LED4), this may take up to 25 seconds. 4. You may release the reset button, now the device should be in TFTP transfer mode. 5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24 should work. 6. Plug the PoE injector's LAN cable directly to your computer. 7. Start tftp client and issue following commands: tftp> binary tftp> connect 192.168.1.20 tftp> put openwrt-ar71xx-generic-ubnt-bullet-m-xw-squashfs-factory.bin Tested only on Bullet M2HP. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ar71xx: ubnt-m-xw: Fix factory image flashing using TFTP recoveryPetr Štetiar2019-04-081-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is backport of the same functionality in ath79, from commit d42a7c469 ("ath79: ubnt-m-xw: Fix factory image flashing using TFTP recovery method") Ubiquity allows flashing of unsigned factory images via TFTP recovery method[1]. They claim in airOS v6.0.7 release changelog[2] following: All future airOS versions will be signed in this way and not allow unsigned firmware to be loaded except via TFTP. U-boot bootloader on M-XW devices expects factory image revision version in specific format. On airOS v6.1.7 with `U-Boot 1.1.4-s1039 (May 24 2017 - 15:58:18)` bootloader checks if the revision major(?) number is actually a number, but in currently generated images there's OpenWrt text and so the check fails: Hit any key to stop autoboot: 0 Setting default IP 192.168.1.20 Starting TFTP server... Receiving file from 192.168.1.25:38438 Received 4981148 bytes Firmware check failed! (1) By placing arbitrary correct number first in major version, we make the bootloader happy and we can flash factory images over TFTP again: Received 3801500 bytes Firmware Version: XW.ar934x.v6.0.4-42.OpenWrt-r9766+2-be42e44 Setting U-Boot environment variables Un-Protected 1 sectors Erasing Flash.... done Patch provided by AREDN[3] project, tested on Bullet M2 XW. 1. https://help.ubnt.com/hc/en-us/articles/204910124-UniFi-TFTP-Recovery-for-Bricked-Access-Points 2. https://dl.ubnt.com/firmwares/XW-fw/v6.0.7/changelog.txt 3. https://github.com/aredn Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: Add support for Toradex Apalis family of CoMsPetr Štetiar2019-04-0811-1/+495
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the following computer on modules (CoM) from Toradex[A]: Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC -40° to +85° C Temp Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC 0° to +70° C Temp Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC -40° to +85° C Temp Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC 0° to +70° C Temp I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on Eval[C] board as well. A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6 B. https://www.toradex.com/products/carrier-board/ixora-carrier-board C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board Flashing/recovery instructions: 1. Download and compile imx_loader for OpenWrt from https://github.com/ynezz/imx_loader 2. Enter recovery mode as desribed in https://developer.toradex.com/knowledge-base/imx-recovery-mode 3. Connect board via USB to the host computer, check that it's connected by lsusb: 15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip in RecoveryMode 4. Copy following OpenWrt images to imx_loader directory: SPL u-boot.img u-boot-with-spl.imx openwrt-imx6-apalis-recovery.scr openwrt-imx6-apalis-squashfs.combined.bin 5. Run imx_usb in imx_loader directory Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: image: Split imx6-sdcard image for reusabilityPetr Štetiar2019-04-081-3/+16
| | | | | | | I'm going to reuse the imx6-sdcard image commands for building of Apalis eMMC images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-envtools: imx6: Add support for Toradex Apalis board familyPetr Štetiar2019-04-081-0/+4
| | | | | | | This patch is needed in order to be able to use fw_{set,print}env commands. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-imx6: Add support for Toradex Apalis board familyPetr Štetiar2019-04-082-0/+134
| | | | | | This patch is needed in order to properly boot OpenWrt bootscript. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* glibc: update to latest 2.27 commit [BZ #22964]Hans Dedecker2019-04-081-2/+2
| | | | | | de9d4aa353 ja_JP locale: Add entry for the new Japanese era [BZ #22964] Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: bump 4.19 to 4.19.34Koen Vandeputte2019-04-0839-213/+102
| | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Removed: - 030-PCI-dwc-skip-MSI-init-if-MSIs-have-been-explicitly-d.patch Altered: - 366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch - 650-netfilter-add-xt_OFFLOAD-target.patch - 662-remove_pfifo_fast.patch - 332-arc-add-OWRTDTB-section.patch - 100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch - 702-phy_add_aneg_done_function.patch New symbols: - ARC_IRQ_NO_AUTOSAVE - SUN50I_ERRATUM_UNKNOWN1 Compile-tested: cns3xxx, imx6, sunxi Runtime-tested: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.111Koen Vandeputte2019-04-0811-20/+20
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.168Koen Vandeputte2019-04-082-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.110Koen Vandeputte2019-04-084-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.167Koen Vandeputte2019-04-081-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* dropbear: bump to 2019.78Hans Dedecker2019-04-072-48/+2
| | | | | | | | | | Fix dbclient regression in 2019.77. After exiting the terminal would be left in a bad state. Reported by Ryan Woodsmall drop patch applied upstream: 010-tty-modes-werent-reset-for-client.patch Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ubox: bump to git HEADStijn Tintel2019-04-071-3/+3
| | | | | | 5130fa4 kmodloader: fix and optimize loading of failed modules Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* tools: cbootimage: depend on automakeTomasz Maciej Nowak2019-04-071-1/+1
| | | | | | | Fix missing aclocal reported by buildbot. Fixes: 8595bb0 ("tools: add cbootimage for tegra") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* firmware-utils: fix nec-enc build on older architecturesChristian Lamparter2019-04-061-1/+1
| | | | | | | | | | | | | | | | | | | | This patch enable gnu99 mode for the nec-enc utility which fixes the following build-breaking errors on some older architectures. nec-enc.c: In function ‘xor_data’: nec-enc.c:34:2: error: ‘for’ loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < len; i++) { ^~~ nec-enc.c:34:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code nec-enc.c: In function ‘main’: nec-enc.c:101:3: error: ‘for’ loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < n; i++) { ^~~ Spotted-By: Buildbot Fixes: fac27643f057 ("firmware-utils: add nec-enc") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: correct DTS for Belkin F9K1109v1 to include switch definitionKip Porterfield2019-04-061-0/+11
| | | | | | | | | Add switch definition for the rtl8367b switch to the DTS/DTSi for the Belkin F9K1109v1 that was mistakenly omitted from the initial commit. Fixes: 017ec068e3df (ramips: add support for Belkin F9K1109v1) Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com>
* ath79: add support for NEC Aterm WG1200CRINAGAKI Hiroshi2019-04-065-7/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NEC Aterm WG1200CR is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9563. Specification: - SoC : Qualcomm Atheros QCA9563 - RAM : DDR2 128 MiB - Flash : SPI-NOR 8 MiB - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : QCA9563 (SoC) - 5 GHz : QCA9888 - Ethernet : 2x 10/100/1000 Mbps - Switch : QCA8334 - LEDs/Input : 12x/4x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - JP1: Vcc, GND, NC, TX, RX from power connector side - 115200 bps Flash instruction using factory image: 1. Boot WG1200CR normaly 2. Access to "http://192.168.10.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Known issues: - cannot be controlled LEDs other than Power (Green/Red) - only Power LEDs are connected to SoC GPIO; other LEDs connected to the gpiochip on ath10k chip (QCA9888) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [commit message formatting]
* firmware-utils: add nec-encINAGAKI Hiroshi2019-04-062-0/+130
| | | | | | | | | | | | | | | | | | | | nec-enc provides firmware encoding/decoding with model specific key for NEC devices. known devices: - Aterm WF1200CR - Aterm WG1200CR - Aterm WG2600HS usage: nec-enc -i infile -o outfile -k key Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [checkpatch fixes, marked usage as noreturn, added static function, moved buf* from stack to the global data segment]
* ramips: backport mt7621-spi from linux-next-20190329Chuanhong Guo2019-04-061-261/+213
| | | | | | | | | | | | | Upstream driver has gone through a series of cleanup and was moved from drivers/staging into drivers/spi. Backport it to replace our messy driver. Tested-by: Jörg Schüler-Maroldt <joerg-linux@arcor.de> [LinkIt Smart 7688, AcSIP AI7688H Wi-Fi module] Tested-by: Rosen Penev <rosenp@gmail.com> Tested-by: Tian Xiao bo <peterwillcn@gmail.com> [Newifi-D2 MediaTek MT7621 ver:1 eco:3] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* build: remove sgid permission from tarEneas U de Queiroz2019-04-062-2/+3
| | | | | | | | | | Otherwise tar will keep the sgid bit when running from a sgid-set directory, resulting in a different file being generated. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworked commit message, removed DMARC]
* wpan-tools: clean up MakefileMichael Heimpold2019-04-061-4/+0
| | | | | | When we only call the default, we do not need to define it explicitly. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* fconfig: cleanup MakefileMichael Heimpold2019-04-061-7/+0
| | | | | | | | | | | We do not need to define an empty Build/Configure since the default checks for existing ./configure and does nothing in case nothing is found. Similar for Build/Compile: we can remove the definition when we only call the default. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* tools/xz: Compile with PIC to fix linking errorsRosen Penev2019-04-061-2/+3
| | | | | | | | | | | I made a similar change to this here: https://github.com/openwrt/packages/pull/8159 However, it turns out this did not fix the problem as the problem has to do with tools/xz and not the xz package. The error is the same and causes linking errors as can be seen above. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: Utilize tplink-safeloader definitionAdrian Schmutzler2019-04-062-19/+6
| | | | | | | | | | | | | | | | | Currently, tplink-safeloader definition is only used a base for another common definition. This patch adjusts tplink-safeloader so it can be actually used for some targets in generic-tp-link.mk. This patch is cosmetic except for the order of "check-size $$$$(IMAGE_SIZE)" and "append-metadata" exchanged for the tplink_re350k-v1 . Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [dealed with tplink_cpe210-v2 and tplink_cpe210-v3, removed tplink-safeloader-uimage's extra IMAGE/sysupgrade.bin rule]
* kernel: Add RIPEMD160 moduleRosen Penev2019-04-061-0/+12
| | | | | | | | After getting rid of cryptsetup's heavy openssl dependency, there is now the problem of missing RIPEMD160 support. RIPEMD160 is used for True/Vera crypt volumes as well as old LUKS1 ones. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: enable R6120 USB powerDavid Bauer2019-04-062-1/+16
| | | | | | | Enable the USB power for the Netgear R6120. Otherwise, no power is supplied to an attached USB device. Signed-off-by: David Bauer <mail@david-bauer.net>
* tools: tplink-safeloader: add C7v5 KR SupportMichael Gray2019-04-061-1/+2
| | | | | | The added entry originates from TP-Links latest Archer C7 v5 KR firmware. Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
* ath79: engenius epg5000: add leds migration scriptTomasz Maciej Nowak2019-04-061-0/+16
| | | | | | | | | | | | | | | With transition from ar71xx to ath79 some of devices change their naming of LEDs. When upgrading from ar71xx target images this will require the user to adjust previously working configuration. This commit adds migration script which can be used to rename old names to new ones. With this previously working configuration will be automatically adjusted, wihtout user intervention. This commit adds migration case for EnGenius EPG5000, the wireless LEDs names have changed from epg5000:blue:wlan2-g and epg5000:blue:wlan-5g to epg5000:blue:wlan2g and epg5000:blue:wlan5g. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* base-files: add leds migrationTomasz Maciej Nowak2019-04-061-0/+39
| | | | | | | | | | | Currently leds migration scripts in ar71xx and lantiq share a lot of logic and introducing leds migration to another target would mean copying this code, again. Therefore add common logic to library in base-files package. Suggested-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ramips: add support for Youku YK-L2Zhao Yu2019-04-063-0/+167
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware spec: CPU: MTK MT7621A RAM: 256MB ROM: 16MB SPI Flash WiFi: MT7603EN + MT7612EN Button: 2 buttons (reset, wps) LED: 8 LEDs (Power 2G 5G WPS Internet LAN1 LAN2 USB) Ethernet: 3 ports, 2 LAN + 1 WAN Other: USB3.0 Flashing instructions: Visit the openwrt forum topic for this router: https://forum.openwrt.org/t/add-openwrt-support-for-youku-yk-l2/34692 to get the bootloader and unlock firmware. 0. upgrade your router with the telnet firmware via the firmware upgrade page on the webui. 1. telnet 192.168.11.1 from your PC 2. Download the pb-boot-youku_l2-20190317-61b6d33.bin and transfer it to the /tmp directory of the router. 3. mtd write /tmp/pb-boot-youku_l2-20190317-61b6d33.bin Bootloader 4. turn off the power 5. Push the reset button while turning on the router and wait until LED start blinking (~10sec.) 6. Connect Ethernet port and goto http://192.168.1.1. 7. Upload the firmware to firmware restore page in webui. Signed-off-by: Zhao Yu <574249312@qq.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [rewrote the flashing instructions, fixed author]
* wireguard: bump to 0.0.20190406Jason A. Donenfeld2019-04-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * allowedips: initialize list head when removing intermediate nodes Fix for an important regression in removing allowed IPs from the last snapshot. We have new test cases to catch these in the future as well. * tools: warn if an AllowedIP has a nonzero host part If you try to run `wg set wg0 peer ... allowed-ips 192.168.1.82/24`, wg(8) will now print a warning. Even though we mask this automatically down to 192.168.1.0/24, usually when people specify it like this, it's a mistake. * wg-quick: add 'strip' subcommand The new strip subcommand prints the config file to stdout after stripping it of all wg-quick-specific options. This enables tricks such as: `wg addconf $DEV <(wg-quick strip $DEV)`. * tools: avoid unneccessary next_peer assignments in sort_peers() Small C optimization the compiler was probably already doing. * peerlookup: rename from hashtables * allowedips: do not use __always_inline * device: use skb accessor functions where possible Suggested tweaks from Dave Miller. * blake2s: simplify * blake2s: remove outlen parameter from final The blake2s implementation has been simplified, since we don't use any of the fancy tree hashing parameters or the like. We also no longer separate the output length at initialization time from the output length at finalization time. * global: the _bh variety of rcu helpers have been unified * compat: nf_nat_core.h was removed upstream * compat: backport skb_mark_not_on_list The usual assortment of compat fixes for Linux 5.1. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* target/octeon: Add Linux 4.19 supportDaniel Engberg2019-04-064-0/+392
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for Linux 4.19 kernel, various cleanups listed below. Drop 170-cisco-hack.patch as these devices never seems to have been supported. Unset kernel symbols: * CONFIG_CAVIUM_CN63XXP1=y No supported hardware uses CN63XXP1 and it causes "slight decrease in performance" Source: https://cateee.net/lkddb/web-lkddb/CAVIUM_CN63XXP1.html * CONFIG_USB_OCTEON_EHCI=y CONFIG_USB_OCTEON_OHCI=y Deprecated Source: https://cateee.net/lkddb/web-lkddb/USB_OCTEON_EHCI.html https://cateee.net/lkddb/web-lkddb/USB_OCTEON_OHCI.html Removed kernel symbols: * # CONFIG_ARCH_HIBERNATION_POSSIBLE=y * CONFIG_ARCH_SUSPEND_POSSIBLE=y These are not in if you do a vanilla config of a MIPS Octeon kernel and I can't find any references about support on this platform. * # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set * CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 No need to have this in by default, not defined in most other targets * CONFIG_CRASH_CORE=y Can't find any documentation why this should be enabled by default * CONFIG_DEBUG_INFO=y Set by https://github.com/openwrt/openwrt/blob/master/config/Config-kernel.in#L134 * CONFIG_DEBUG_SPINLOCK=y No need to have this in by default * CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 Already set by default Source: https://cateee.net/lkddb/web-lkddb/DEFAULT_HUNG_TASK_TIMEOUT.html * CONFIG_DETECT_HUNG_TASK=y No need to have this in by default, not defined in most other targets * CONFIG_HAVE_DEBUG_KMEMLEAK=y No need to have this in by default, not defined in most other targets * CONFIG_HAVE_DEBUG_STACKOVERFLOW=y No need to have this in by default * CONFIG_HAVE_IDE=y None of the supported devices have IDE * CONFIG_HZ=250 * # CONFIG_HZ_100 is not set * CONFIG_HZ_250=y This is broken with generic config * CONFIG_KALLSYMS=y No need to have this in by default, not defined in most other targets * CONFIG_KEXEC=y * CONFIG_KEXEC_CORE=y No need to have this in by default, not defined in most other targets * CONFIG_HAVE_KVM=y No need to have this in by default * CONFIG_SCHED_DEBUG=y No need to have this in by default, not defined in most other targets * CONFIG_SYSFS_DEPRECATED=y Deprecated symbol Source: https://cateee.net/lkddb/web-lkddb/SYSFS_DEPRECATED.html * CONFIG_SYSFS_DEPRECATED_V2=y Discouraged usage in general Source: https://cateee.net/lkddb/web-lkddb/SYSFS_DEPRECATED_V2.html * CONFIG_UNINLINE_SPIN_UNLOCK=y No need to have this in by default, not defined in most other targets Source: https://github.com/openSUSE/kernel/blob/master/lib/Kconfig.debug#L1137 * CONFIG_ZLIB_INFLATE=y No need to have this in by default, not defined in most other targets Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mvebu: sysupgrade: sdcard: keep user added partitonsTomasz Maciej Nowak2019-04-065-11/+83
| | | | | | | | Currently sysupgrade overwrites whole disk and destroys partitions added by user. Sync the sysupgrade code with the one present in x86 target to remedy this behaviour. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: base-files: autodetect upgrade deviceTomasz Maciej Nowak2019-04-062-10/+18
| | | | | | | Since some boards could be also booted from other mediums than SD card, lets make the upgrade block device autodetected. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: shrink amount of packages and reorganize themTomasz Maciej Nowak2019-04-066-11/+15
| | | | | | | | | Since most of devices using SD card image to boot, use ext4 as boot files system we can drop fat fs related packages. Also move packages which are added repeatedly across subtargets to their default packages, with droping the ones that are enabled in target kernel configugation. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: use ext4 for clearfog image bootfsTomasz Maciej Nowak2019-04-061-2/+2
| | | | | | | This will allow to drop additional packages and shrink image size. Cc: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: make bootfs size for sdcard image configurableTomasz Maciej Nowak2019-04-063-12/+8
| | | | | | | Let's take this oportunity to implement boot-part and rootfs-part feature flags. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* zynq: replace storage related configs by packagesLuis Araneda2019-04-062-10/+3
| | | | | | | Select build-in packages by default and remove the associated kernel configs Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: replace CAN kconfig options by device packagesLuis Araneda2019-04-062-21/+1
| | | | | | | | | | The options are managed on a generic way by the can kmod packages Additionally, select can packages only for devices that currently has CAN enabled, which is only the ZC702 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* kernel: can: add Xilinx CAN IP kernel module packageLuis Araneda2019-04-061-1/+13
| | | | | | | This driver is required to use the CAN IP on devices from the zynq target Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: remove video/camera kconfig optionsLuis Araneda2019-04-061-12/+0
| | | | | | | | | | The options are managed on a generic way by video packages Additionally, only one of the currently supported boards has a camera interface, but it requires programming the FPGA fabric first Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: remove sound kconfig optionsLuis Araneda2019-04-061-19/+0
| | | | | | | | | | | The options are managed on a generic way by the sound kmod packages Additionally, none of the currently supported boards have sound support out of the box, as they require programming the FPGA fabric first Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* kernel: sound: add missing symbol to sound-soc-coreLuis Araneda2019-04-061-0/+1
| | | | | | | This fixes compilation on zynq target when migrating to sound kmod packages Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: refresh configLuis Araneda2019-04-061-14/+2
| | | | Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* mac80211: update to version 4.19.32-1Hauke Mehrtens2019-04-0615-185/+89
| | | | | | | | The removed patches are now integrated in the upstream kernel. Refresh all patches on top of the new backports release. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mbedtls: update to version 2.16.1Josef Schlehofer2019-04-063-28/+28
| | | | | | | Refreshed patches Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz> Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tegra: add kernel 4.19 supportTomasz Maciej Nowak2019-04-064-0/+682
| | | | Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* tegra: add support for CompuLab TrimSliceTomasz Maciej Nowak2019-04-063-1/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is a small form factor computer with rich amount of expansion ports. Some hardware specs and supported features in this commit: CPU: NVIDIA Tegra 2 @ 1GHz RAM: 1GB DDR2-667 Storage: SDHC card slot µSDHC card slot USB to SATA bridge (depends on model) 1MB SPI NOR flash for bootloader (single partition) LAN: RTL8111DL GbE WIFI: RT3070 b/g/n with external antenna (depends on model) RTC: EM3027 (mapped as rtc0; with battery backup) Tegra 2 built-in (mapped as rtc1) Sound: Analog/Digital (TLV320AIC23b; S/PDIF not tested) Connectors: 4x USB 2.0 RS232 (mini serial) HDMI DVI-D (depends on model, not supported atm) Extension connector (24 pin ZIF, 0.5mm pitch): 2X UART SPI JTAG (1.8V) Other: power button with green led (not functional for early revisions without programmed PMIC) 2x GPIO configurable green led TrimSlice uses U-Boot placed in NOR flash. Boots Linux from any media connected to USB, SATA or SD card inserted in slot. Can also boot from TFTP. To run OpenWrt one needs to update U-Boot to fairly recent version (the versions, pre-dts/dts provided by CompuLab won't suffice): 1. Boot TrimSlice into Your current linux distro, 2. Download trimslice-spi.img from u-boot-trimslice subdir, 3. Install mtd-utils, 4. Run following commands: flash_erase /dev/mtd0 0 256 nandwrite /dev/mtd0 trimslice-spi.img 5. Poweroff, insert SD card with OpenWrt, boot and enjoy. If by some obstacle You can't follow those instructions, it is possible to flash U-Boot using serial console. 1. Insert FAT or EXT2/EXT3 formatted SD card with trimslice-spi.img, 2. Interrupt boot process to enter U-Boot command line, 3. Run following commands: ${fs}load mmc 0 0x04080000 trimslice-spi.img sf probe 0 sf erase 0 0x100000 sf write 0x04080000 0x0 ${filesize} reset 4. Poweroff, insert SD card with OpenWrt, boot and enjoy. If something went wrong with one of above steps, there is simple recovery option: 1. Open the µSD slot security door to access the recovery-boot button, 2. Insert SD card with OpenWrt to the front slot while unpowered, 3. Power on the TrimSlice while pressing the recovery-boot button, 4. With this it should boot straigth to OpenWrt, from there download trimslice-spi.img and execute following commands: mtd erase /dev/mtd0 mtd write trimslice-spi.img /dev/mtd0 5. Reboot, now it should boot straigth to OpenWrt, without pressing the recovery-boot button, with proper U-Boot flashed. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: package rtc-em3027 moduleTomasz Maciej Nowak2019-04-061-0/+18
| | | | | | Support for Microelectronic EM3027 real time clock chip. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 20:29:16 +0000