aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) imagesLuka Perkov2016-03-142-4/+15
| | | | | | | | | | | | | | | | | | | The new image requires `bootz` because of devicetree appending. To flash a new image boot initramfs: tftpboot 0x800000 openwrt-kirkwood-dockstar-initramfs-kernel.bin bootz 0x800000 # detach if already attached ubidetach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}') # scp openwrt-kirkwood-dockstar-squashfs-factory.bin /tmp ubiformat -f /tmp/openwrt-kirkwood-dockstar-squashfs-factory.bin # attach is important to resize rootfs_data otherwise it wont boot ubiattach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}') Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49010
* kirkwood: add DEVICE_VAR KERNEL_IN_UBI for kernel as volume in ubi imagesLuka Perkov2016-03-141-1/+16
| | | | | | | | depending on KERNEL_IN_UBI, the image.mk will create a ubi volume for the kernel Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49009
* kirkwood: add feature devicetreeLuka Perkov2016-03-141-1/+1
| | | | | | | | this platform already uses devicetree Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49008
* brcm47xx: image: create standard TRX images using new building systemRafał Miłecki2016-03-111-15/+20
| | | | | | | | | | | | | | | | | | | | | | | | Apart from using our new building system there are 2 more changes: 1) Limit amount of images So far we were generating all standard images (optimized one and two with no loader) for every SUBTARGET. This is not needed, as e.g. the only device requiring gzipped kernel is legacy Huawei E970. 2) Change output names The new image building system requires specifying device name. This forced picking some and resulted in: openwrt-brcm47xx-$(SUBTARGET)-squashfs.trx openwrt-brcm47xx-$(SUBTARGET)-squashfs-gz.trx openwrt-brcm47xx-$(SUBTARGET)-squashfs-noloader-nodictionary.trx becoming: openwrt-brcm47xx-$(SUBTARGET)-standard-squashfs.trx openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-gz-squashfs.trx openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-nodictionarylzma-squashfs.trx Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49006
* Revert "kernel: Linux IP Virtual Server kernel modules (netfilter.mk patch)"Jo-Philipp Wich2016-03-111-54/+0
| | | | | | This reverts commit 845d82da156781135b027ecf75ff67e2253e06dd. SVN-Revision: 49005
* oxnas: complete NAND driver clean-upJohn Crispin2016-03-101-4/+0
| | | | | | | | some bit rot was accidentally left-out in r48986, remove it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48997
* procd: fix respawn related warningJohn Crispin2016-03-101-0/+1
| | | | | | | | WARNING: Variable 'respawn' does not exist or is not an array/object Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 48996
* tools/cmake: fix compile on Alpine LinuxJohn Crispin2016-03-101-0/+17
| | | | | | | | | | | | | | | | | | internal jsoncpp include order leads to multiple build errors on Alpine Linux which uses musl libc use include order from upstream jsoncpp first error was: In file included from /usr/include/c++/5.3.0/stdexcept:38:0, from /home/..../openwrt/build_dir/host/cmake-3.4.3/Utilities/cmjsoncpp/include/json/assertions.h:16, from /home/..../openwrt/build_dir/host/cmake-3.4.3/Utilities/cmjsoncpp/src/lib_json/json_reader.cpp:7: /usr/include/c++/5.3.0/exception:35:9: error: '#pragma' is not allowed here #pragma GCC visibility push(default) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 48995
* ramips: Add support for GL-MT750John Crispin2016-03-107-1/+177
| | | | | | | | This patch adds support for GL-MT750. GL-MT750 is powered by MT7620A and MT7610e, dual band 802.11ac, 2.4G 300Mbps and 5G 450Mbps. It has 5 LANs, MMC interface, USB, a lot of IOs and PoE support. SVN-Revision: 48994
* ramips: Add support for GL-MT300NJohn Crispin2016-03-107-1/+173
| | | | | | | | This patch adds support for GL-MT300N. GL-MT300N is powered by MT7620N with 16MB flash, 64MB RAM, 2 LANs, USB, UART, GPIO and PoE support. SVN-Revision: 48993
* ramips: Add support for GL-MT300AJohn Crispin2016-03-107-0/+190
| | | | | | | | This patches adds support for GL-MT300A. GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM, Two LANs, USB, UART and MMC daughter board. SVN-Revision: 48992
* tools/findutils: Update to 4.6.0John Crispin2016-03-102-161/+3
| | | | | | | | | Update GNU findutils to the new stable version 4.6.0 Remove the patch for 32-bit buildhosts as the issue is fixed upstream. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48991
* package/devel/gdb: Update to 7.11John Crispin2016-03-102-3/+3
| | | | | | | | Update gdb to version 7.11 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48990
* toolchain/gdb: Update to 7.11John Crispin2016-03-104-5/+5
| | | | | | | | Update gdb to version 7.11 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48989
* pkg-config: Update to 0.29.1John Crispin2016-03-101-4/+4
| | | | | | | | | * Bump pkg-config version to 0.29.1 * Use https for the source download (http gets directed there) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48988
* mm-macros: update to 0.9.10John Crispin2016-03-101-3/+3
| | | | | | | | Bump mm-macros to 0.9.10 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48987
* oxnas: clean-up NAND driver to fix probing issueJohn Crispin2016-03-101-13/+5
| | | | | | | | | | | A re-write of the driver based on xway_nand.c and constants as well as the cmd_ctrl() function from the original oxnas_nand.c resulted in a extremely similar looking file (see diffsize), and fixes the issue of NAND not being detected on newer kernels. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48986
* brcm2708: update patches to latest versionJohn Crispin2016-03-1013-6/+763
| | | | | | | | | | | | As usual these patches were extracted from the raspberry repo: https://github.com/raspberrypi/linux/commits/rpi-4.4.y - Disable unused MFD RPISENSE driver. - Disable ethernet HW checksums in order to avoid kernel exceptions. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48985
* procd: support pidfile writing.John Crispin2016-03-101-1/+2
| | | | | | | | | | | | procd from revision b12bb150ed38a4409bef5127c77b060ee616b860 supports writing a pidfile. This adds support for setting that parameter with standard init script hooks: procd_set_param pidfile /var/run/someprocess.pid Signed-off-by: Karl Palsson <karlp@etactica.com> SVN-Revision: 48984
* ar71xx: Arduino Yun board 'WLAN RST' button supportJohn Crispin2016-03-101-0/+21
| | | | | | | | This patch adds support for Arduino Yun board "WLAN RST" button. Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com> SVN-Revision: 48983
* kernel: Linux IP Virtual Server kernel modules (netfilter.mk patch)John Crispin2016-03-101-0/+54
| | | | | | | | | | | | IPVS (IP Virtual Server) implements transport-layer load balancing inside the Linux kernel so called Layer-4 switching. IPVS running on a host acts as a load balancer at the front of a cluster of real servers, it can direct requests for TCP/UDP based services to the real servers, and makes services of the real servers to appear as a virtual service on a single IP address. Signed-off-by: Mauro Mozzarelli <mauro@ezplanet.net> SVN-Revision: 48982
* procd: bump to latest git HEADJohn Crispin2016-03-101-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 48981
* brcm63xx: fix BCM3368 interrupt controller addressesJohn Crispin2016-03-101-2/+2
| | | | | | | | | Looks like the addresses for BCM3368 were wrongly defined when DT support was introduced. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48980
* brcm63xx/lzma-loader: fix O32 ABI conformanceJohn Crispin2016-03-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | According to the calling convention of the o32 ABI the caller function must reserve stack space for $a0-$a3 registers in case the callee needs to save its arguments. The assembly code of the loader does not reserve stack space for these registers thus when the 'loader_main' function needs to save its arguments, those will be stored in the 'workspace' area instead of the stack. Because the workspace area is also used by other part of the code, the saved register values gets overwritten and this often leads to failed kernel boots. Fix the code to reserve stack space for the registers to avoid this error. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> [noltari: apply the fix for brcm63xx too] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48979
* tools/flock: fix compile on Alpine LinuxJohn Crispin2016-03-101-0/+1
| | | | | | | | | | | | fixes build errors: src/flock.c:208:34: error: 'O_NOCTTY' undeclared (first use in this function) fd = open(filename, O_RDONLY|O_NOCTTY|O_CREAT, 0666); src/flock.c:208:43: error: 'O_CREAT' undeclared (first use in this function) fd = open(filename, O_RDONLY|O_NOCTTY|O_CREAT, 0666); Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 48978
* ar71xx: add support for the Telldus TellStick ZNet LiteJohn Crispin2016-03-1013-0/+189
| | | | | | Signed-off-by: Micke Prag <micke.prag@telldus.se> SVN-Revision: 48977
* base-files: add function ucidef_set_interface_raw to enable default ↵John Crispin2016-03-101-0/+6
| | | | | | | | configuration on interfaces other than lan and wan. Signed-off-by: Micke Prag <micke.prag@telldus.se> SVN-Revision: 48976
* brcm47xx: image: move disabled devices to the new building systemRafał Miłecki2016-03-091-13/+3
| | | | | | | | | This only drops WGR614 V9 which has 2 MiB flash and it's unlikely to get any interest. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48975
* brcm47xx: image: switch Linksys WRT54G3GV2-VF to the new building systemRafał Miłecki2016-03-091-45/+28
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48974
* brcm47xx: image: switch Netgear WGT634U to the new building systemRafał Miłecki2016-03-081-6/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48973
* brcm47xx: image: switch rest of 64k block devices to the new building systemRafał Miłecki2016-03-081-28/+45
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48972
* brcm47xx: image: switch Motorola devices to the new building systemRafał Miłecki2016-03-081-7/+22
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48971
* brcm47xx: image: switch D-Link DWL-3150 to the new building systemRafał Miłecki2016-03-081-7/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48970
* openvpn: add support for X.509 name optionsJohn Crispin2016-03-081-0/+1
| | | | | | | | | x509-username-field was added in OpenVPN 2.2, and verify-x509-name was added in 2.3. This fixes ticket #18807. Signed-off-by: Jeffery To <jeffery.to@gmail.com> SVN-Revision: 48969
* ramips: add support for Planex MZK-WDPR.John Crispin2016-03-085-0/+84
| | | | | | | | | | | add support for Planex MZK-WDPR. MZK-WDPR(MZK-WDPR-R01) is internet radio tuner. This patch is "network board" in MZK-WDPR. LCD board is non OpenWrt Platform. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 48968
* brcm2708: add Raspberry Pi 3 supportJohn Crispin2016-03-0811-20/+443
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48967
* brcm2708: update linux 4.4 patches to latest versionJohn Crispin2016-03-08170-314/+2268
| | | | | | | | | As usual these patches were extracted from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48966
* brcm2708-gpu-fw: update to latest versionJohn Crispin2016-03-081-4/+4
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48965
* include: add Cortex-A53 CPU_TYPEJohn Crispin2016-03-081-0/+1
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48964
* bcm53xx: update bcm47xx_sprom to the latest 4.6 queued versionRafał Miłecki2016-03-083-104/+6
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48963
* bcm53xx: fix SPROM driver compilation with ssb/bcma as moduleRafał Miłecki2016-03-082-0/+98
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48962
* bcm53xx: revert patch removing imprecise abort workaroundRafał Miłecki2016-03-081-0/+66
| | | | | | | | It seems it still happens on some devices. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48961
* kernel: backport bcma 4.6 changes for flashesRafał Miłecki2016-03-073-39/+855
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48960
* mac80211: backport brcmfmac patchset with driver setting conceptRafał Miłecki2016-03-0722-3/+4468
| | | | | | | | | | This prepares brcmfmac for better country handling and fixes BCM4360 support which was always failing with: [ 13.249195] brcmfmac: brcmf_pcie_download_fw_nvram: FW failed to initialize Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48959
* mt76: update to the latest version, adds some mt7603/mt7628 fixesFelix Fietkau2016-03-071-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48958
* musl: update to latest git, adds some fixes for the mips64 port and regular ↵Felix Fietkau2016-03-073-3308/+3736
| | | | | | | | expressions Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48957
* kernel: add MIPS kernel fix for an uninitialized CPU mapFelix Fietkau2016-03-071-0/+31
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48956
* kernel: remove linux 4.3 supportFelix Fietkau2016-03-07192-27827/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48955
* ramips: convert the remaining subtargets to 4.4Felix Fietkau2016-03-0789-35482/+65
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48954
* ramips: fix subtarget kernel version assignment (only mt7621 is ready for now)Felix Fietkau2016-03-072-1/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48953