aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ltq-vdsl-app: load the vrx200 firmware or patch itFelix Fietkau2016-03-072-1/+43
| | | | | | | | This checks for the VRX firmware provided in the OpenWrt package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48940
* dsl-vrx200-firmware-xdsl: create Lantiq vrx200 firmware patchesFelix Fietkau2016-03-073-94/+129
| | | | | | | | | | | Instead of having two big binaries only add one binary and then a patch to create the other one when needed at runtime. This is easier to handle in one Makefile for both firmware files. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48939
* mac80211: rework gpio chip/button support to build on platforms without ↵Felix Fietkau2016-03-072-153/+124
| | | | | | | | CONFIG_GPIOLIB Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48938
* ar71xx: fix qca956x ethernet initializationFelix Fietkau2016-03-071-3/+18
| | | | | | | | | Complete internal switch initialization for QCA956X. Set default mdio device if the interface mode of GE0 is not SGMII (fix ticket #21520). Signed-off-by: Weijie Gao <hackpascal@gmail.com> SVN-Revision: 48937
* ar71xx: enable USB packages for WNR2200 (fixes #21984)Felix Fietkau2016-03-061-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48936
* bcm53xx: use SPROM driver queued for 4.6Rafał Miłecki2016-03-067-224/+137
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48935
* prereq: stop relying on man pages and grep for --recursive on the ↵Felix Fietkau2016-03-051-1/+1
| | | | | | | | git-submodule script directly (fixes #21968) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48934
* kernel: update kernel 4.4 to version 4.4.4Hauke Mehrtens2016-03-0518-50/+39
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48933
* kernel: mpc85xx: fix build of kmod-usb2-fslHauke Mehrtens2016-03-051-9/+10
| | | | | | | | | | | Fix buildbot error for mpc85xx. ehci-fsl.ko should be packaged inside the usb2 package, because it depends on the ehci kernel module. The fsl-mph-dr-of.ko module can stay in an own package because the ehci driver depends on it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48932
* kernel: fix section mismatch in crashlogHauke Mehrtens2016-03-054-4/+4
| | | | | | | | | | | | | | | The function memblock_insert_region() is in the section __init_memblock, also put crashlog_init_memblock there. This fixes this section mismatch warning: The function memblock_insert_region.isra.1() references the function __meminit crashlog_init_memblock(). This is often because memblock_insert_region.isra.1 lacks a __meminit annotation or the annotation of crashlog_init_memblock is wrong. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48931
* spi-gpio-custom: fix section mismatchHauke Mehrtens2016-03-051-4/+4
| | | | | | | | | | | | This fixes this section mismatch warning: The function spi_gpio_custom_get_slave_cs() references the variable __initdata bus_nump. This is often because spi_gpio_custom_get_slave_cs lacks a __initdata annotation or the annotation of bus_nump is wrong. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48930
* kernel: add missing config optionsHauke Mehrtens2016-03-056-4/+8
| | | | | | | | | | The buildbots complained about these config options being missing for arm64: CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48929
* uclibc++: add a patch to fix memory corruption issues on exceptionsFelix Fietkau2016-03-051-0/+114
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48928
* build: fix git prereq check to forcibly disable man pagers on the --help checkFelix Fietkau2016-03-051-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48927
* build: fix git prereq check to not rely on being in a git directory (#21968)Felix Fietkau2016-03-051-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48926
* ar71xx: WNR612v2: enable control of all LEDs and buttonsFelix Fietkau2016-03-052-2/+74
| | | | | | | | | This patch provides full GPIO support for WNR612v2 (LEDs and buttons). It exposes all LEDs to operating system, including Ethernet ones. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48924
* ar71xx: WNR2000v3: add speed_mask to Ethernet port LED initializationFelix Fietkau2016-03-051-8/+8
| | | | | | | | | | This patch add speed_mask parameter to Ethernet port LED initialization during system startup. LEDs are configured to show amber light for 10 Mbps link and green for 100 Mbps as described on device label. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48923
* ar71xx: WNR2000v3: enable control of all LEDs and buttonsFelix Fietkau2016-03-053-10/+143
| | | | | | | | | This patch provides full GPIO support for WNR2000v3 (LEDs and buttons). It exposes all LEDs to operating system, including Ethernet ones. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48922
* mac80211: ath9k: enable GPIO buttonsFelix Fietkau2016-03-054-0/+194
| | | | | | | | | | Enable platform-defined GPIO button support for ath9k device. Key poller is activated for attached platform buttons. Requires ath9k GPIO chip access. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48921
* netifd: fix build errorJo-Philipp Wich2016-03-041-1/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48920
* netifd: fix VTI ikey/okey endianessJo-Philipp Wich2016-03-041-2/+2
| | | | | | | | | Ensure that ikey and okey are sent in network byte order to the kernel. Also don't mangle external IP addrs and routes when reconfiguring iinterfaces. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48919
* buildroot: apply IGNORE_ERRORS to host buildsJo-Philipp Wich2016-03-041-2/+5
| | | | | | | | | Apply the error ignore mechanism to host builds as well in order to skip over broken feed packages. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48918
* opkg: Fix handling of sha256sums for conffilesJohn Crispin2016-03-042-1/+15
| | | | | | | | | MD5s are shorter than SHA256, so reading buffer has to be bigger to read the whole hash. Signed-off-by: Michal Hrusecky <michal.hrusecky@nic.cz> SVN-Revision: 48917
* AP121 target: fix board detection in ar71xx.shJohn Crispin2016-03-041-1/+1
| | | | | | Signed-off-by: Attila Lendvai <attila@lendvai.name> SVN-Revision: 48916
* procd: Allow to configure default respawn retry countJohn Crispin2016-03-041-0/+10
| | | | | | | | | | | | | | | | | | Extend /etc/config/system with a parameter to set the default respawn retry for procd launched services that have respawn enabled. config service option respawn_retry -1 All services that don't specify specific respawn parameters will get their defaults added by procd.sh. If respawn_retry is specified in /etc/config/system the default retry limit will be set to this value by procd. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 48915
* AR8216: improve mmd register accessJohn Crispin2016-03-043-13/+17
| | | | | | | | | | | Combine all bus operations for one MMD access in one function. Protecting all these bus operations with one lock also helps to avoid potential issues due to bus operations intercepting the register and data write. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48914
* AR8216: make ARL age time configurableJohn Crispin2016-03-044-4/+80
| | | | | | | | | | | | | | | | | The default TTL for address resolution table entries is 5 minutes for all members of the AR8216 family. This can cause issues if e.g. Wifi clients roam to another AP and their MAC appears on another switch port suddenly. Then the client may not be reachable until the old ARL entry expires. I would have expected the switch to invalidate old entries if it detects the same MAC on another port. But that's not the case. Therefore make the TTL for ARL entries configurable. The effective TTL will always be a multiple of 7 seconds. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48913
* AR8216: remove redundant port number in MIB header lineJohn Crispin2016-03-041-2/+1
| | | | | | | | | The line before includes the port number anyway so there's no need to duplicate the port number in the MIB info header. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48912
* AR8216: complement MIB counters with info in GiB / MiB / KiBJohn Crispin2016-03-041-5/+40
| | | | | | | | | | The decimal values especially for TxByte and RxGoodByte are hard to read once bigger amounts of data have been transferred. Therefore complement the decimal values with info in GiB / MiB / KiB. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48911
* AR8216: don't display MIB counters if all are emptyJohn Crispin2016-03-041-1/+8
| | | | | | | | | | | | For unused switch ports all MIB values are zero. Displaying ~40 empty MIB counters is just confusing and makes it hard to read the output of swconfig dev <dev> show. Therefore, if all MIB counters for a port are zero, just display an info that the MIB counters are empty. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48910
* imx6: image: Add missing kernel prefixJohn Crispin2016-03-041-0/+1
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 48909
* ramips: mt7621: fix WF-2881 for ubi splitJohn Crispin2016-03-042-14/+5
| | | | | | | | This patch fix firmware split for WF-2881 which was previously manually partitioned. Signed-off-by: YounJae Rho <luxflow@live.com> SVN-Revision: 48908
* lua: host: install lnum_config.hJohn Crispin2016-03-041-0/+11
| | | | | | | | | | | One of the host patches introduces the new header file lnum_config.h included by luaconf.h, but doesn't install it. Install it to allow building C modules for the host Lua. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48907
* ramips: Add profiles for JCG routersJohn Crispin2016-03-042-0/+60
| | | | | | | | | | This patch adds profiles and support for building factory and sysupgrade images for JHR-N805R, JHR-N825R and JHR-N926R. Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48906
* ramips: Add JCG routers to base-filesJohn Crispin2016-03-044-0/+18
| | | | | | | | | | This patch adds support for JHR-N805R, JHR-N825R and JHR-N926R to various scripts in the base-files directory. Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48905
* ramips: Add device tree for JCG JHR-N926RJohn Crispin2016-03-041-0/+127
| | | | | | | | | | | | | | | | Add a device tree for JCG JHR-N825R This router is based on a RT3052 and has 4MB of CFI flash and 32MB of SDRAM. As a special feature, it comes with a two digit seven segment display that is connected to a pair of daisy-chained 74164 shift registers that can be controlled via GPIOs. For details, see https://wikidevi.com/wiki/JCG_JHR-N825R . Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48904
* ramips: Add device tree for JCG JHR-N825RJohn Crispin2016-03-041-0/+81
| | | | | | | | | | | | Add a device tree for JCG JHR-N825R This router is based on a RT3052 and has 4MB of CFI flash and 32MB of SDRAM. For details, see https://wikidevi.com/wiki/JCG_JHR-N825R . Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48903
* ramips: Add device tree for JCG JHR-N805RJohn Crispin2016-03-041-0/+89
| | | | | | | | | | | | Add a device tree for JCG JHR-N805R This router is based on a RT3050 and has 4MB of SPI flash and 16MB of SDRAM. For details, see https://wikidevi.com/wiki/JCG_JHR-N805R . Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48902
* ramips: Add a tool to create JCG factory imagesJohn Crispin2016-03-041-209/+220
| | | | | | | | replace spaces with tabs Signed-off-by: Reinhard Max <reinhard@m4x.de> SVN-Revision: 48901
* mac80211: improve rate control performanceFelix Fietkau2016-03-031-0/+77
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48897
* mt76: update to the latest version, adds stability fixesFelix Fietkau2016-03-031-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48895
* kernel: gpio-button-hotplug: Add missing ONESHOT flag to threaded IRQ requestJohn Crispin2016-03-032-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Without the IRQF_ONESHOT flag in devm_request_threaded_irq() call I get following error: genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 56 gpio-keys gpio-keys: failed to request irq:56 for gpio:20 >From kernel/irq/manage.c: The interrupt was requested with handler = NULL, so we use the default primary handler for it. But it does not have the oneshot flag set. In combination with level interrupts this is deadly, because the default primary handler just wakes the thread, then the irq lines is reenabled, but the device still has the level irq asserted. Rinse and repeat.... While this works for edge type interrupts, we play it safe and reject unconditionally because we can't say for sure which type this interrupt really has. The type flags are unreliable as the underlying chip implementation can override them. Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 48894
* ramips: Incorrect file mode changeJohn Crispin2016-03-034-0/+0
| | | | | | | | | | | Commit d0f5ab6d95a1 ("ramips: Added support for ZBT-826 / ZBT-1026") incorrectly changed the mode of the ramips shell scripts from 755 to 644. I.e., they are not excutable any more and for example devices will be left with broken configs. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> SVN-Revision: 48893
* target/mpc85xx: check for 'generic' subtarget for initramfs image fileJohn Crispin2016-03-031-0/+2
| | | | | | | | | | | | | Copy 'cuImage.tl-wdr4900-v1-initramfs' only for the 'generic' subtarget. This is a follow-up to: http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=b889fe55c1844aec2c03da28fecb03e958c21f18 We build our initramfs images more rarely, so it took a while to catch this too. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 48892
* mtd: fix reading of image magic bytes in smaller chunksJohn Crispin2016-03-031-5/+12
| | | | | | | | | | | | | | | The image_check currently fails when it cannot read all magic bytes in a single chunk. But this can happen when the data are read from a pipe. This currently breaks the openmesh.sh upgrade script with musl because it uses dd with a blocksize of 1 to copy the image file to the mtd process. The read can simply be repeated until enough bytes are read for the magic byte check. It only stops when either an error was returned or 0 bytes were read. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 48891
* om-watchdog: Move each board name to its own lineJohn Crispin2016-03-031-4/+10
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 48890
* om-watchdog: Stop om-watchdog via procd before rebootingJohn Crispin2016-03-031-8/+24
| | | | | | | | | | | | | | | | It was noticed that the system can hang during the reboot before the kernel actually triggers the system reset and before all processes are stopped. The watchdog didn't automatically restart the system because the om-watchdog process was still running and triggering the hardware watchdog. Instead the system should stop the watchdog during the shutdown to get the benefit of an hardware reset in case of an software related problem. This stop can be done quite easily with procd because it keeps track of its started processes. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 48889
* ramips: Add a tool to create JCG factory imagesJohn Crispin2016-03-032-0/+393
| | | | | | | | | | This tool creates factory images for JCG routers. Details can be found in the header comment of jcgimage.c. Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48888
* ramips: enable mt76 on mt7688 by defaultFelix Fietkau2016-03-022-0/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48886
* mt76: update to the latest version, adds basic mt7628 supportFelix Fietkau2016-03-021-2/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48885
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 20:08:28 +0000