aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: fix io_space_limitJohn Crispin2016-06-141-0/+28
| | | | | | this broke uhci pci support on some arv units Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix kmod-sound-mt7620 packagingJo-Philipp Wich2016-06-141-6/+5
| | | | | | | | | | | | | Commit 9ff8928bb9c28be701eb963e591afcfd54b9d8c9 renamed the snd-soc-mt7620-i2s driver and dropped snd-soc-mt7620-wm8960 which selected CONFIG_SND_SOC_WM8960 breaking all ramips builds due to undefined kernel config symbols. Rework the kmod-sound-mt7620 package to explicitely select the CONFIG_SND_SOC_WM8960 symbols and change it to bundle the renamed .ko file. Also remove the @BROKEN flag and exclude it on the rt288x subtarget instead. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* bcm53xx: refresh kernel configRafał Miłecki2016-06-141-5/+0
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* Revert "ar71xx: enable flow control for ethernet MACs with built-in switch"Felix Fietkau2016-06-141-9/+1
| | | | | | | | This reverts commit 1beb5bec6453abb220c5be4ddb9e6dc02d08d735. It was found to cause the WAN port to fail on some AR934x devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm47xx: add the small_Flash featureJohn Crispin2016-06-131-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath25: add the small_Flash featureJohn Crispin2016-06-131-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* config: add a small_flash featureJohn Crispin2016-06-133-1/+5
| | | | | | this causes KALLSYMS to be off by default Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix ARV452CQW button gpio setupJohn Crispin2016-06-131-7/+7
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add AVM image mageic to sysupgrade scriptJohn Crispin2016-06-131-0/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* package/lantiq: make lantiq kernel modules work with xway_legacyJohn Crispin2016-06-136-25/+26
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add xway_legacy targetJohn Crispin2016-06-135-62/+116
| | | | | | due to bloat recent builds fail to fit into the flash of the old danube units Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: gpio-export fails to build if GPIO_SYSFS is not enabledJohn Crispin2016-06-131-7/+11
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* fstools: split snapshot-tool into its own packageJohn Crispin2016-06-131-2/+16
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* fstools: remove bogus warning in the fstab scriptJohn Crispin2016-06-131-4/+6
| | | | | | | | | | | | | /etc/init.d/fstab had some warnings in it to let users know that they should call "block mount" directly. these ended up in the bootlog. fix this by splitting the code into boot() and start(). this way the system will boot without warning but manually starting the script will lead to the message. fixes FS#3 Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: John Crispin <john@phrozen.org>
* openvpn: update to 2.3.11Magnus Kroken2016-06-133-4/+25
| | | | | | | | | | Security fixes: * Fixed port-share bug with DoS potential * Fix buffer overflow by user supplied data Full changelog: https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn23#OpenVPN2.3.11 Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ar71xx: mach-ubnt-xm.c convert patches to mach fileArne Zachlod2016-06-134-773/+701
| | | | Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* tools/firmware-utils: Add Archer C50 to mktplinkfw2Henryk Heisig2016-06-131-0/+7
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips/image: Add Archer C50 to mt7620 MakefileHenryk Heisig2016-06-131-0/+9
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips/base-files: Add support for Archer C50Henryk Heisig2016-06-135-1/+16
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips/dts: Add support for Archer C50Henryk Heisig2016-06-131-0/+156
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* lantiq: Add Support for Fritz!Box 7360 SLJohn Crispin2016-06-135-0/+233
| | | | | Signed-off-by: Sebastian Ortwein <krone@animeland.de> Tested-by: Guido Lipke <lipkegu@gmail.com>
* strace: add option for enabling stack trace supportYousong Zhou2016-06-131-1/+10
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* libunwind: initial version 1.1Yousong Zhou2016-06-134-0/+141
| | | | | | | | | | | | | | The package Makefile was based on work at link [1] with the following changes 1. Disable minidebuginfo support thus no dependency on liblzma 2. Add 2 patches for building against musl-libc and building with mips16 enabled 3. Add LICENSE and DEPENDS info, etc. [1] https://github.com/rpi-openwrt/rpi-packages/tree/master/libs/libunwind Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: add support for DuZun DM06Michael Lee2016-06-135-0/+171
| | | | | | | | DuZun DM06 is a develop board based on mt7628 64M RAM, 8M SPI Flash, 1 WAN, 1 LAN. wm8960 codec with line out, line in and speaker output. Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: enable wm8960 kernel menuconfig select optionMichael Lee2016-06-131-0/+11
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: add i2s clocksMichael Lee2016-06-131-3/+30
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: update i2s dtsi filesMichael Lee2016-06-137-5/+111
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: improve i2s driversMichael Lee2016-06-131-461/+742
| | | | | | | | | | | | | | | * remove mt7620-wm8960.c use simple card and DTS to do it * add old chips support * add 12Mhz refclk setup. this is hard code. need use clock framework rewrite it * add interrupt error status support for debug. default disable it. because it cause to many interrupts * add setup bclk suport not hard code it * add 24 bits support for mt7628. not verified * use regmap api to control registers * add txdma-req/rxdma-req DTS params for DMA use Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: add i2c clockMichael Lee2016-06-131-0/+40
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: update i2c dtsi filesMichael Lee2016-06-138-17/+127
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: update i2c driversMichael Lee2016-06-132-371/+611
| | | | | | | | | | | | | | | | | * add rt_i2c structure to store driver data * rewrite read/write check function and add i2c error status check. so we don't need to wait until time out. * add 10 bits address support. according to the data sheet i think it is possible. but i haven't verify it. * the most important is start transfer only need once. otherwise it cause I2C_STARTERR status. * add set i2c clock speed register by dts options "clock-frequency". not just hard code it. * add mt7621 i2c driver. i just copy i2c-ralink.c and change register names. and the hardware don't support error status. so i remove it. but the logic is the same. Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: add gdma hsdma dts infoMichael Lee2016-06-137-2/+104
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: enhance dma engine supportMichael Lee2016-06-131-211/+1339
| | | | | | | | | | | | | | * fix compiler error. device_control operation not support now. * add old chips support 8 channels. new chips support 16 channels. * add mt7621 hsdma driver. data sheet says it has two channels. but after test only one channel support. * add memory to memory DMA support. i use dmatest kernel module to verify this function. on rt305x it will copy more data. on mt7621 only two channels can works at the same time. these two chips maybe have hardware bugs. because on other chips don't have these bugs. * use tasklet to handle remaining dma requests. Signed-off-by: Michael Lee <igvtee@gmail.com>
* feeds.conf.default: disable management feedJohn Crispin2016-06-131-1/+1
| | | | | | looks like the upstream source packages were un-published. Signed-off-by: John Crispin <john@phrozen.org>
* ubox: update to latest git HEADJohn Crispin2016-06-131-3/+4
| | | | | | this adds the new getrandom wrapper tool Signed-off-by: John Crispin <john@phrozen.org>
* toolchain/gdb: Use correct folder name for ARC patchesAlexey Brodkin2016-06-134-13/+0
| | | | | | | | | | | Even though ARC tools were released as arc-2016.03 we have a little bit different version name for GDB. That's because both Binutils and GDB come from the same git repo but from different branches (and so different tags). Also removing an extra patch that made its way into release. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* package/devel/gdb-arc: Add target GDB for ARCAlexey Brodkin2016-06-135-1/+159
| | | | | | | | | | | | | | | | ARC port of GDB is not yet upstream so we need to use sources from Synopsys GitHub repo. Given Synopys' commitment to upstream ARC support in GDB in the nearest future it might be simpler to add a separate package for ARC GDB instead of patching generic GDB package. This way once ARC GDB stuff gets uptreamed we'll only need to remove that new "gdb-arc" package. Note 1 very minor change in generic gdb package was done - it now depends on !arc (while "gdb-arc" depends on "arc"). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* ipq806x: move dts file to the files folderJohn Crispin2016-06-138-1173/+1528
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipg806x: set v4.4 as defaultJohn Crispin2016-06-1380-21248/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: add mangle bootargs options in config-4.4Adrian Panella2016-06-131-1/+4
| | | | | | Add config options to manage dual boot partitions, using MANGLE BOOTARGS Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* ipq806x: base-files: add support for Linksys EA8500Adrian Panella2016-06-138-0/+142
| | | | Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* ipq806x: build Linksys EA8500 imagesJohn Crispin2016-06-131-1/+18
| | | | Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* ipq806x: qcom rpm fix support for smb208Adrian Panella2016-06-132-0/+124
| | | | | | | | | In commit "regulator: qcom: Rework to single platform device" the smb208 regulator used in IPQ8064 was left out. Add it to that new framework and update Docs and DT accordingly. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* uboot-envtools: add ipq806x supportJohn Crispin2016-06-133-1/+32
| | | | Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* mtd: add linksys_bootcount for ipq806xAdrian Panella2016-06-131-0/+1
| | | | | | Reset bc is needed for Linksys EA8500's dual boot. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* mac80211: ath10k fix otp check patchAdrian Panella2016-06-131-1/+1
| | | | | | Fix patch to match new updated package version Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* lantiq: use new property name for eiu irqsJohn Crispin2016-06-134-4/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix a regression in the eiu irq loading codeJohn Crispin2016-06-131-0/+78
| | | | | | | | | this worked in 3.18 but broke at some point. the old code that loaded a irq table was incorrewct anyhow as it mapped the irqs int he domain which should really be done when the driver using them loads them and not the irq driver itself. Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add default lan setup to board.d scriptJohn Crispin2016-06-131-0/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* package/*: update git urls for project reposJohn Crispin2016-06-1323-23/+23
| | | | Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 22:31:27 +0000