aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* fstools: update to latest lede-17.01 branchRafał Miłecki2018-04-161-3/+3
| | | | | | | 6609e98 libfstools: add "const" to char pointer arguments in mount_move() 95c07d5 libfstools: fix foreachdir() to pass dir with a trailing slash Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump kernel 4.4 to 4.4.126 for 17.01Stijn Segers2018-04-1433-132/+98
| | | | | | | | | * Refreshed patches Compile-tested: ar71xx, ramips/mt7621, x86/64 Run-tested: ar71xx Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* mbedtls: change libmbedcrypto.so soversion back to 0Hauke Mehrtens2018-04-146-5/+31
| | | | | | | | | | | | | | | | | | mbedtls changed in version 2.7.0 and 2.7.2 the soversion of the libmbedcrypto.so library, use the old version again to be able to use the new library with binaries compiled against the old mbedtls library. Some binaries got rebuild to for the 2.7.0 release and are now using libmbedcrypto.so.1, the older ones are still using libmbedcrypto.so.0. Go back to libmbedcrypto.so.0 and make the system rebuild the binaries which were rebuild for 2.7.0 again. This should make the libmbedcrypto.so library be compatible with the old version shipped with 17.01. Fixes: 3ca1438ae0 ("mbedtls: update to version 2.7.2") Fixes: f609913b5c ("mbedtls: update to version 2.7.0") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: mtd: bcm47xxpart: improve handling TRX partition sizeRafał Miłecki2018-04-121-0/+65
| | | | | | | | | | | | | | | | This is important fix for flash parsing in some corner cases. In case of TRX subpartition with rootfs being aligned to the flash block size it was incorrectly registered twice. Detecting & registering it as a standalone partition was resulting in an incorrect "firmware" partition size and possibly broken sysupgrade. It wasn't noticed before because "rootfs" alignment depends on a kernel size. It can happen though - depending on the configuration and the kernel size. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f5195e72c0fcf2949f7d6296a5db081eb58f8e32)
* ar71xx: sysupgrade: improve CPE/WBS 210/510 validation, add new metadata offsetMatthias Schiffer2018-04-101-12/+20
| | | | | | | | | Previously, tplink_pharos_check_image() would accept any image with ELF magic and only non-printable data in the support-list, as in this case the while-read loop would not run at all. Add the new support-list offset and ensure an image is only accepted when the model string is actually found. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: backport commit reverting genirq patch causing regressionsRafał Miłecki2018-04-051-0/+37
| | | | | | | | | | | | | | | | | | | Switching from kernel 4.4.120 to 4.4.124 introduced a regression in the genirq code. It was caused by a commit 9d0273bb1c4b6 ("genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"). On bcm53xx it breaks serial console and results in a flood of: [ 22.078829] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio) [ 22.086432] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio) [ 22.601150] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio) [ 22.608845] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio) Later in the upstream "linux-4.4.y" branch that commit was reverted and it was followed by a 4.4.126 release. Until we switch from 4.4.124 to 4.4.126 (or newer), let's backport that reverting commit. Fixes: bed0ee7cbfaa5 ("Kernel: bump 4.4 to 4.4.124 for 17.01") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* intel-microcode: update to 20180312Zoltan HERPAI2018-04-041-3/+3
| | | | | | | | | | | | | | | | | - Update microcode for 24 CPU types - Implements IBRS/IBPB/STIPB support, Spectre-v2 mitigation for: Sandybridge, Ivy Bridge, Haswell, Broadwell, Skylake, Kaby Lake, Coffee Lake - Missing production updates: - Broadwell-E/EX Xeons (sig 0x406f1) - Anniedale/Morefield, Apollo Lake, Avoton, Cherry Trail, Braswell, Gemini Lake, Denverton - New Microcodes: - sig 0x00050653, pf_mask 0x97, 2018-01-29, rev 0x1000140 - sig 0x00050665, pf_mask 0x10, 2018-01-22, rev 0xe000009 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> (cherry picked from commit 3db9d6e57def2912314c7ce0bc0c282f313ed654)
* brcm47xx: add Luxul XAP-1500 and XWR-1750 WiFi LEDsRafał Miłecki2018-04-032-2/+88
| | | | | | (cherry picked from commit 16efb0c1c6c7702e694aef8f297b57b7c10b98c1) Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: add support for BCM4366E chipsetRafał Miłecki2018-04-032-1/+47
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mbedtls: update to version 2.7.2Hauke Mehrtens2018-04-012-23/+23
| | | | | | This fixes some minor security problems. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* openssl: update to 1.0.2oPaul Wassi2018-04-014-11/+11
| | | | | | Fixes CVE-2018-0739 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* Kernel: bump 4.4 to 4.4.124 for 17.01Stijn Segers2018-04-0119-170/+142
| | | | | | | | | | * Refreshed patches * Removed 087-Revert-led-core-Fix-brightness-setting-when-setting-.patch (applied upstream) Compile-tested on ar71xx, ramips/mt7621, x86/64 Run-tested on ar71xx Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* mac80211: brcmfmac: backport commit dropping IAPP packets by defaultRafał Miłecki2018-03-212-1/+158
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: merge a pending fix for HFSC warnings/slowdowns (fixes FS#1136)Felix Fietkau2018-03-113-3/+89
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mbedtls: update to version 2.7.0Hauke Mehrtens2018-03-106-53/+42
| | | | | | | | | | | | | | | | | | | This fixes the following security problems: * CVE-2018-0488: Risk of remote code execution when truncated HMAC is enabled * CVE-2018-0487: Risk of remote code execution when verifying RSASSA-PSS signatures This release is also ABI incompatible with the previous one, but it is API compatible. Some functions used by a lot of other software was renamed and the old function names are provided as a static inline now, but they are only active when deprecated functions are allowed, deactivate the removal of deprecated functions for now. Also increase the PKG_RELEASE version to force a rebuild and update of packages depending on mbedtls to handle the changed ABI. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/e2fsprogs: fix building on a glibc 2.27 hostStefan Lippers-Hollmann2018-03-102-1/+54
| | | | | | | | | | | | | | | | | | | | The e2fsprogs host build fails on a glibc 2.27 host with make[6]: Entering directory 'build_dir/host/e2fsprogs-1.43.7/debugfs' CC create_inode.o ./../misc/create_inode.c:399:18: error: conflicting types for 'copy_file_range' static errcode_t copy_file_range(ext2_filsys fs, int fd, ext2_file_t e2_file, ^~~~~~~~~~~~~~~ In file included from ./../misc/create_inode.c:19:0: /usr/include/unistd.h:1110:9: note: previous declaration of 'copy_file_range' was here ssize_t copy_file_range (int __infd, __off64_t *__pinoff, ^~~~~~~~~~~~~~~ Backport upstream commit "misc: rename copy_file_range to copy_file_chunk" 01551bdba16ab16512a01affe02ade32c41ede8a in order to fix this. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* generic: revert broken LED core patchMatthias Schiffer2018-03-081-0/+28
| | | | | | | | | At least on some devices, LEDs don't work anymore since kernel 4.4.120. Revert the broken change. See also: https://www.spinics.net/lists/stable/msg223656.html Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: tune fragment queue thresholds for available system memoryMatthias Schiffer2018-03-072-10/+21
| | | | | | | | | The default fragment low/high thresholds are 3 and 4 MB. On devices with only 32MB RAM, these settings may lead to OOM when many fragments that cannot be reassembled are received. Decrease fragment low/high thresholds to 384 and 512 kB on devices with less than 64 MB RAM. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/package-defaults.mk: fix default Build/Prepare with empty ./srcMatthias Schiffer2018-03-071-1/+1
| | | | | | | Copying ./src/* would fail when src exists, but is empty or only contains hidden files. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/rootfs.mk: retain list of conffiles with CONFIG_CLEAN_IPKGMatthias Schiffer2018-03-071-1/+8
| | | | | | | | /usr/lib/opkg/status must not be removed completely, otherwise the packages' conffile lists will be missing. Replace it with a reduced version only containing the conffile entries. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/rootfs.mk: do not remove opkg prerm scripts during rootfs preparationMatthias Schiffer2018-03-071-1/+0
| | | | | | | When a user removes a preinstalled opkg package, the package's prerm script (and in particular our default_prerm) should run. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: sysupgrade: do not rely on opkg to list changed conffilesMatthias Schiffer2018-03-072-2/+21
| | | | | | | Many packages use the opkg conffiles field to list configuration files that are to be retained on upgrades. Make this work on systems without opkg. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: bump 4.4 to 4.4.120 for 17.01Stijn Segers2018-03-0419-70/+63
| | | | | | | | | Bump the 4.4 kernel for the 17.01 release to 4.4.120. Refresh patches. Compile-tested: ar71xx, ramips/mt7621, x86/64 Run-tested: ar71xx, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* x86: add preinit hook to reload microcodeZoltan HERPAI2018-03-041-0/+10
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: add microcode package for IntelZoltan HERPAI2018-03-041-0/+49
| | | | | | | | | | | | | | | | Compiling the Intel microcode package results in a microcode.bin and a microcode-64.bin. As we can decide based on the subtarget which should be used, we'll only split the required .bin file with iucode-tool. x64 will get the intel-microcode-64.bin All other variants will get intel-microcode.bin The microcodes will be updated from preinit via a common script - that's the earliest place where we can do it. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: add microcode package for AMDZoltan HERPAI2018-03-041-0/+45
| | | | | | | | | | | Use the Debian repository for sourcing the ucode files. Current (20171205) includes support for fam17h CPUs already. The microcodes will be updated from preinit via a common script - that's the earliest place where we can do it. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* tools: add iucode-toolZoltan HERPAI2018-03-041-0/+47
| | | | | | | | | | | | Add tool to "compile" Intel microcode files. The tool will be compiled for host (to split the microcode.dat) and for target (to forcibly reload the microcode if required). Instead of using the large microcode.bin/microcode-64.bin, the splitted ucode files (separate for CPU families) will be installed. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* x86: enable microcode loading for Intel and AMDZoltan HERPAI2018-03-041-1/+4
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* odhcpd: fix interop with wide DHCPv6 client (FS#1377)Hans Dedecker2018-03-021-4/+4
| | | | | | aedc154 dhcpv6-ia: don't always send reconf accept option (FS#1377) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: fix off-by-one in counting seconds for factory resetRafał Miłecki2018-03-011-1/+1
| | | | | | | | | There was a mismatch between indicating factory reset and code actually starting it. After 5 seconds status LED started blinking rapidly letting user know it's ready to release reset button. In practice button had to stay pressed for another second in order to relly start the process. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* sunxi: disable LPAE to allow kernel to run on A13Matteo Scordino2018-02-271-22/+2
| | | | | | | | | Fixes issue FS#1355. LPAE extensions are enabled, but the A13 does not support them. The result is the boot process stopping at "Starting kernel ..." Fixes: 468735c3a2f7 ("target: sunxi: enable kvm support") Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
* bcm53xx: fix fallback code for picking status LEDRafał Miłecki2018-02-271-1/+1
| | | | | | | | Looking for a wrong LED file name was stopping this code from find any LED. This affects devices with only a red/amber power LED. Fixes: 3aaee1ba023ac ("bcm53xx: failsafe support") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mountd: update to the latest version from 2018-02-26Rafał Miłecki2018-02-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | This significantly improves mountd stability & reliability by: 1) Sending hotplug.d event when appropriate 2) Properly unmounting 3) Handling corner cases when unmounting fails 4) Improving log messages 5f2c419 mount: drop duplicated includes aaf2743 mount: call hotplug-call with ACTION=remove before trying to unmount 97da4ed mount: try lazy unmount if normal one fails 1b62489 mount: create not working symlink when unmounting fails e77dc6d mount: reorder deleting code in the mount_enum_drives() 76766ae mount: rename tmp variables in the mount_add_list() 04b897f mount: drop duplicated rmdir() call from the mount_enum_drives() a27ea3f mount: drop duplicated unlink() call from the mount_dev_del() bf7cc33 mount: fix/improve unmounting log messages 36f9197 mount: fix removing mount point if it's expired ed4270f mount: struct mount: replace "mounted" and "ignore" fileds with a "status" 1af9ca2 mount: change mount_dev_del() argument to struct mount * 7c8fea8 mount: rename /proc/mount parser to mount_update_mount_list() 7aadd1c mount: improve handling mounts table size Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* perf: restrict libunwind dependency to archs that actually support libunwindMatthias Schiffer2018-02-251-1/+1
| | | | | | | | | | Allow building perf on uncommon targets again. Depending on the kernel version, not all of these archs will actually use libunwind in perf. Still, it seems simpler and less error-prone to use the same list that is defined in the libunwind package. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* libunwind: fix build with musl on PPCMatthias Schiffer2018-02-251-0/+383
| | | | | | | | | | | Works around two incompatiblities between glibc and (POSIX-compliant) musl: - missing register definitions from asm/ptrace.h - non-POSIX-compliant ucontext_t on PPC32 with glibc Compile tested on mpc85xx. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* uqmi: ensure CID is a numeric value before proceedingKoen Vandeputte2018-02-201-4/+4
| | | | | | | | | | | The current implementation only checked if uqmi itself executed correctly which is also the case when the returned value is actually an error. Rework this, checking that CID is a numeric value, which can only be true if uqmi itself also executed correctly. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: update 17.01 kernel to 4.4.116Stijn Segers2018-02-2030-241/+126
| | | | | | | | | | | | | | | | | | This bumps the 4.4. kernel in LEDE 17.01 to 4.4.116. More Meltdown & Spectre mitigation. * Refresh patches. * Refresh x86/config for RETPOLINE. * Deleted 8049-PCI-layerscape-Add-fsl-ls2085a-pcie-compatible-ID.patch (accepted upstream) * Deleted 8050-PCI-layerscape-Fix-MSG-TLP-drop-setting.patch (accepted upstream) * 650-pppoe_header_pad.patch does not apply anymore (code was replaced). Bumps from 4.4.113 to 4.4.115 were handled by Kevin Darbyshire-Bryant. Compile-tested on: ar71xx, ramips/mt7621, x86/64 Run-tested on: ar71xx, ramips/mt7621, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* uqmi: use built-in command for data-link verificationKoen Vandeputte2018-02-182-2/+20
| | | | | | | | | | | uqmi contains a command for directly querying the modem if there is a valid data connection, so let's use it. This avoids the cases were all previous tests are succesful, but the actual data link is not up for some reasons, leading to states were we thought the link was up when it actually wasn't .. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use correct value for connection checkingKoen Vandeputte2018-02-181-4/+8
| | | | | | | | | | | | | | Originally, the implementation only checked if uqmi command execution succeeded properly without actually checking it's returned data. This lead to a pass, even when the returned data was indicating an error. Rework the verification to actually check the returned data, which can only be correct if the uqmi command itself also executed correctly. On command execution success, value "pdh_" is a pure numeric value. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use general method for state cleaningKoen Vandeputte2018-02-181-10/+4
| | | | | | | | | | Debugging shows that using the general method properly cleans on each run, while the method specifying the client-ID shows "No effect" even while in connected state. Fixes several connectivity issues seen on specific modems. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: silence error on pin verificationKoen Vandeputte2018-02-181-1/+1
| | | | | | | | | | | | If a device only supports the 2nd verification method (uim), the first method will fail as expected reporting an error: "Command not supported" Silence both separate methods and only report an error regarding pin verification if both fail. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: fix raw-ip mode for newer lte modemsKoen Vandeputte2018-02-182-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some newer LTE modems, like the MC7455 or EC25-E do not support "802.3" mode, and will stay in "raw-ip" regardless of the mode being set. In this case, the driver must be informed that it should handle all packets in raw mode. [1] This commit fixes connectivity issues for these devices. Before: [ Node 5 ] udhcpc -i wwan0 udhcpc: started, v1.27.2 udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover After: [ Node 5 ] udhcpc -i wwan0 udhcpc: started, v1.27.2 udhcpc: sending discover udhcpc: sending select for 100.66.245.226 udhcpc: lease of 100.66.245.226 obtained, lease time 7200 udhcpc: ifconfig wwan0 100.66.245.226 netmask 255.255.255.252 broadcast + udhcpc: setting default routers: 100.66.245.225 [1] https://lists.freedesktop.org/archives/libqmi- devel/2017-January/002064.html Tested on cns3xxx using a Sierra Wireless MC7455 LTE-A Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [bumped PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* net: uqmi: fix blocking in endless loops when unplugging deviceAlexandru Ardelean2018-02-181-0/+2
| | | | | | | | | | | If you unplug a QMI device, the /dev/cdc-wdmX device disappears but uqmi will continue to poll it endlessly. Then, when you plug it back, you have 2 uqmi processes, and that's bad, because 2 processes talking QMI to the same device [and the same time] doesn't seem to work well. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel: refresh patchesKoen Vandeputte2018-02-187-57/+18
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: backport raw-ip mode for newer QMI LTE modemsKoen Vandeputte2018-02-187-0/+701
| | | | | | | | | | | | | | Backport support for raw-ip mode including all known fixes afterwards. Newer LTE modems only tend to support this mode, which was only introduced in kernel 4.5. Also backport support for the Quectel EC2x LTE modem series which is a very popular device. No custom changes were needed in order to apply these patches. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* base-files: don't evaluate block-device ueventDaniel Golle2018-02-151-5/+8
| | | | | | | | | | Backport commits fixing the detection of GPT partition names during preinit and sysupgrade, closing a shell-injection vulnerability. da52dd0c83 ("base-files: quote values when evaluating uevent") 267873ac9b ("base-files: don't evaluate block-device uevent") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: backport mt7530/762x switch fixesJo-Philipp Wich2018-02-151-20/+239
| | | | | | | | | | dc7a1e8555 ("ramips: fix reporting effective VLAN ID on MT7621 switches") 341b1427fc ("ramips: properly map pvid for vlans with remapped vid on mt7530/762x switches") bb4002c79d ("ramips: don't clobber vlans with remapped vid on mt7530/762x switches") Fixes FS#991, FS#1147, FS#1341 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* perf: use libunwindMaxim Gorbachyov2018-02-131-1/+1
| | | | | | | Without libunwind perf does not show userspace stack frames. Tested on mvebu. Signed-off-by: Maxim Gorbachyov <maxim.gorbachyov@gmail.com>
* libunwind: enable build for armMaxim Gorbachyov2018-02-131-1/+1
| | | | | | Tested with perf on mvebu. Signed-off-by: Maxim Gorbachyov <maxim.gorbachyov@gmail.com>
* ar71xx: remove bs-partition ro-flag for UniFi ACDavid Bauer2018-02-111-1/+1
| | | | | | | | | | | | This removes the read-only flag from the bs (bootselect) partition on UniFi AC devices. This allows to correct the indicator from which partition the device is booting its kernel from. See also: - https://github.com/freifunk-gluon/gluon/issues/1301 - https://bugs.lede-project.org/index.php?do=details&task_id=662 Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 08:53:23 +0000