aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* scripts/getver.sh: append short git hash based on upstream commitMagnus Kroken2017-03-011-1/+2
| | | | | | | | | | | The short git hash suffix printed by getver.sh is taken from the latest local commit, change this to use the hash from latest upstream commit if available. This is considered the intended behavior based on commit message a642a11faca87e2a7bddc1fadb54253e2fc26e84, introducing getver.sh. Signed-off-by: Magnus Kroken <mkroken@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* leds-apu2: Add PC Engines APU2 LED driverChris Blake2017-03-014-0/+435
| | | | | | | This adds support for the PCB LEDs and Reset Button found on the PC Engines APU2/APU3 embedded boards. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* netfilter: re-enable TEE support for kernel 4.4Koen Vandeputte2017-03-011-1/+1
| | | | | | | | | It got disabled in commit 4454a3fb6375cf1adf17f63a54cd7660bc40caa7 but works nicely these days. Tested on cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* gpio-nct5104d: Add nct5104d driver packageChris Blake2017-03-014-0/+519
| | | | | | | | | | | | | | This adds support for the SuperIO chip nct5104d found on the PC Engines APU boards, which allows for a handful of additional ports, such as 2x additional UART pinouts, enabling an external watchdog (no driver for this functionality yet), and 16 GPIO pins. More info can be found at https://pcengines.ch/ht_gpio.htm Thanks to @feckert for helping package this. Cc: Florian Eckert <Eckert.Florian@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86/64: Enable GPIO sysfs & GPIO LED supportChris Blake2017-03-011-0/+9
| | | | | | | | The following changes enables GPIO sysfs as well as the LEDS_GPIO option within the kernel. This is required to enable LEDs over a GPIO interface. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: drop ep80579-driversMathias Kresin2017-03-0129-13884/+0
| | | | | | | | The subtarget on which the driver still depends was removed with dee8986b95dcc200550faebe49c143e5d2357c60 because it was unmaintained for a long time. Signed-off-by: Mathias Kresin <dev@kresin.me>
* 6in4: add missing colon when setting default ca_pathDaniel Golle2017-03-011-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to latest git HEADJohn Crispin2017-03-011-3/+3
| | | | | | | | | | | 5f91241 procd: add cancel_timeout on rc scripts when a runtime_timeout is specified 961dc69 procd: stop service using SIGKILL if SIGTERM failed to do so Fixes FS#516. Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 946d1dfb87d41cf9ffb487522f6a84a5e87edafb) Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* procd: update to the latest versionFelix Fietkau2017-03-011-3/+3
| | | | | | | Fixes compatibility issues with glibc 2.25 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 2ffb80bc9f829f81878b12a10b0a352d3f76c421)
* hostapd: fix feature indicationJo-Philipp Wich2017-03-011-2/+14
| | | | | | | | - Fix eap test to work with standalone hostapd builds - Fix 11n test to check the correct define - Add 11ac, 11r and 11w tests Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* relayd: fix making incomplete instance json dataYousong Zhou2017-02-262-7/+14
| | | | | | | | Defer procd_open_instance only after validity check passed. Fixes FS#541 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* relayd: remove old start-stop-service related codeYousong Zhou2017-02-261-15/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ppp: ppp6-up: add executable permission bitYousong Zhou2017-02-261-0/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mac80211: hwsim: select DRIVER_11AC_SUPPORT and DRIVER_11W_SUPPORTYousong Zhou2017-02-261-1/+1
| | | | | | | | This is required for default wireless configuration of malta target to work out of the box again. Fixes "77ece30e: hostapd: Add ability to specify that that wireless driver supports 802.11ac" Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* openvpn: adding key_direction to append_params.Brandon Koepke2017-02-261-2/+2
| | | | | | | | key_direction shows up as an openvpn option in the user-interface but does not end up in the /var/etc/openvpn*.conf file. Adding it to the list here fixed the issue for me. Signed-off-by: Brandon Koepke <bdkoepke@fastmail.com> [Fixes FS#537] Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ubus: update to the latest versionFelix Fietkau2017-02-251-3/+3
| | | | | | | | | | c09e4f0 ubusd: fix incomplete copy of shared buf during queue-ing 453b87f cli: add support for subscribing to objects 6eb3c96 cli: do not use default timeout for listen dfe3383 libubus: reset ctx->sock.error when doing ubus reconnect 34c6e81 cli: fix listen_timeout compile issue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubus: update to the latest versionFelix Fietkau2017-02-251-3/+3
| | | | | | | | | Adds the following fixes: 91acde6 libubus: do not modify uloop_cancelled 763b9b2 libubus: reset ctx->sock.eof to fix reconnect issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: Update to latest versionTed Hess2017-02-251-3/+3
| | | | | | 9d6305a utils: Change calloc_a() to return size_t aligned pointers Signed-off-by: Ted Hess <thess@kitschensync.net>
* libubox: update to the latest versionFelix Fietkau2017-02-251-3/+3
| | | | | | | | | | | | | | | Adds the following changes: de3f14b uloop: add uloop_cancelling function 3b6181b utils: fix build on Mac OS X 10.12 7f671b1 blobmsg: add support for double 0fe1374 utils: add helper functions useful for allocating a ring buffer 8fc1c30 libubox: replace strtok with _r version. 4a9f74f libubox: allow reading out the pid of uloop process in lua 372e1e6 uloop: remove useless epoll data assignment f9db1cb libubox: allow reading out the remaining time of a uloop timer in Lua Signed-off-by: Felix Fietkau <nbd@nbd.name>
* acx-mac80211: fix scan API error that could lead to a crashFelix Fietkau2017-02-241-0/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iw: sync nl80211.h with mac80211 packageFelix Fietkau2017-02-241-5/+289
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync with master branch as of 9edff13abd97Felix Fietkau2017-02-24214-12942/+1799
| | | | | | | | | | | | | | | | Includes the following changes: 9edff13abd mac80211: disable potentially harmful PS software retry for A-MPDU sessions 75216a76b0 mac80211: backport upstream fix for CSA in IBSS mode 368cc8ef47 mac80211: update brcmfmac backporting brcmf_err cleanups 66a63d25c4 mac80211: fix build on linux 3.18 9eacb9d7fc rt2x00: mt7620: lots of improvements fd94fa61a7 mac80211: brcmfmac: update Raspberry Pi patches for linux 4.9 649e766a64 mac80211: update to wireless-testing 2017-01-31 47540afa5d ath9k: add a warning to the tx99 config option b367eef21d mac80211: rt2x00: add support for external LNA on MT7620 9200e168f2 mac80211: move (& update) upstream accepted brcmfmac patches Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is setFelix Fietkau2017-02-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: fix kernel api compatibility issuesFelix Fietkau2017-02-242-0/+108
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.Ben Greear2017-02-241-3/+3
| | | | | | | The driver had a bug when calculating the rateset. This resolves that and allows full VHT mcs rates on 2x2 hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* mt76: split kmod packageJoseph C. Lehner2017-02-231-13/+49
| | | | | | | | | | | | | | | | This patch splits `kmod-mt76` into three separate packages: `kmod-mt76-core`, `kmod-mt76x2` and `kmod-mt7603`. By making `kmod-mt76` a metapackage containing these new packages, the previous behaviour of including all drivers and firmware is left unchanged, unless explicitly unselected in `DEVICE_PACKAGES`. This splitting is especially beneficial for devices with small flash chips, since the `kmod-mt76` package currently requires ~160K on squashfs (after compression). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* lantiq: fix broadcast packets leaking on the wrong vlan on xrx200Felix Fietkau2017-02-231-5/+6
| | | | | | | | | | | | | | | The ethernet driver uses a port map override via special tag to control the ports on which multicast packets are sent. This was added to work around an issue in the switch that was occasionally leaking packets onto the wrong vlan. Unfortunately the change had some leftover lines that were overwrting the port map with a list of all ports, thus always leaking packets onto the wront vlan. Fix this by only enabling the override with the VLAN port map and only if a matching VLAN port map was actually found Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move upstream accepted bcm47xxpart TRX cleanupsRafał Miłecki2017-02-222-3/+10
| | | | | | Use 0xx prefix for accepted patches. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport bcm47xxsflash support for reading 32 MiB flashesRafał Miłecki2017-02-222-0/+144
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups ↵Stijn Tintel2017-02-221-6/+0
| | | | | | | | | | | | (FS#384)" This reverts commit ec1a695daa7390a6c24e3b28d3956f194cba2cb5. Revert the workaround, the problem was properly fixed in 237454991618e0e8b7ceb8a8a2a43fca12c1a454. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 5c49fecf72c9c10b1d302b0a9d4db3b4ce3c782c)
* ar8216: flush ARL table during reset after init_globalsGünther Kelleter2017-02-221-0/+1
| | | | | | | | | | | | | | commit 33b72b8e0faf7a39faabece584fd6da61cd8f8df "ar8216: adjust ATU flushing in case of link changes" introduced portwise flushing on link down events. Now the ARL table could be in a chaotic state after boot where ar8xxx_sw_get_arl_table looped forever (depending on the entries collected while booting). Fixes FS#384. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> (cherry picked from commit 237454991618e0e8b7ceb8a8a2a43fca12c1a454) Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* cmake: skip build system check on compileFelix Fietkau2017-02-211-0/+4
| | | | | | | | | | | | | cmake checks the build system and its variables on its own to detect if the makefiles need to be regenerated. Unfortunately this can invalidate overrides passed in the Build/Configure step. On non-Linux systems this breaks the build when switching between targets of the same package architecture. Fix this by forcibly disabling the build system check and relying on the LEDE build system to take care of these things Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: Add upstream patch fixing SERVFAIL issues with multiple serversBaptiste Jonglez2017-02-201-0/+130
| | | | | | This fixes FS#391 for lede-17.01 Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* kernel: update kernel 4.4 to version 4.4.50Jo-Philipp Wich2017-02-2014-90/+47
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "px5g-standalone: provide px5g via PROVIDES"Stijn Tintel2017-02-201-1/+0
| | | | | | | | | | | | | This reverts commit cc66f819b4e778732a32f08f5dc39a2554682b73. This commit causes opkg to install px5g-standalone instead of px5g when installing luci-ssl. As luci-ssl depends on mbedtls, using px5g-standalone makes no sense. Next to that, it creates deprecated SHA1 certificates. Revert the commit to avoid pxg5-standalone to be installed by accident. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit ca8aee0c570561fc59fb0d0e6b5eac418054c372)
* uboot-kirkwood: fix goflexhome/net bootcommandAlberto Bursi2017-02-191-1/+1
| | | | | | | | | | Goflexhome/net use uImage, and to boot an uImage the u-boot must use bootm command, not bootz. Fixes the "i cannot boot LEDE with this u-boot" issue that I found out myself with my goflexnet. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ar71xx: Remove images for rb-941-2ndThibaut VARENE2017-02-191-2/+0
| | | | | | | | | | The code that generates this image is broken in many ways. The new code currently in master generates images that will not be compatible with the ones in 17.01. To avoid a migration nightmare, this patch removes image generation for this device in 17.01 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* sdk: emit proper tag references for base URLsJo-Philipp Wich2017-02-191-3/+5
| | | | | | | | | Properly resolve symbolic tag names when constructing the base feed Git url and avoid emitting "HEAD" references when building from detached commits. Fixes #495, #501. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: set the internet led interface according to wan interfaceMathias Kresin2017-02-181-0/+1
| | | | | | | | Use the nas0 interface for the netdev trigger as default. Use the ptm0 interface for xRX200 boards to match the default wan interface set in 02_network. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: introduce lantiq_is_vdsl_systemMathias Kresin2017-02-182-1/+5
| | | | | | | Move the code to check if the current system is a system with vdsl support to a dedicate function to make it reusable. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV7519RW22 switch port indexingMathias Kresin2017-02-181-1/+1
| | | | | | Fixes FS#454. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uhttpd: use sha256 when generating certificates with openssl (FS#512)Felix Fietkau2017-02-171-1/+1
| | | | | | Patch from attachment to FS#512 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dropbear: bump PKG_RELEASEStijn Tintel2017-02-171-1/+1
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 27040dbf89fb45dd9b5cc663e23bb19afc294d29)
* dropbear: enable SHA256 HMACsJoseph C. Sible2017-02-171-3/+2
| | | | | | | | | The only HMACs currently available use MD5 and SHA1, both of which have known weaknesses. We already compile in the SHA256 code since we use Curve25519 by default, so there's no significant size penalty to enabling this. Signed-off-by: Joseph C. Sible <josephcsible@users.noreply.github.com> (cherry picked from commit 0bf85ef04806e0fd5a6f78ac9f6a32aabb1e7fdc)
* ar71xx: fix ethernet PLL configuration for QCA956xFelix Fietkau2017-02-171-1/+1
| | | | | | | QCA956x is configured like AR934x, not like the older chips. Should fix ethernet hangs when using the WAN port without SGMII Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: Set default baud rate on Geode images to 115200David Woodhouse2017-02-171-1/+0
| | | | | | | | | | | Prior to commit 1496b95a0 ("x86: clean up default grub baudrate settings") we had three different baud rates for the Geode targets: 19200 for net5501, 38400 for alix2, and 115200 for Geos. It doesn't seem that there's a very good reason for varying from our default 115200 baud, so let's make the Geode target do that instead. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Add Geos profile for Geode subtargetDavid Woodhouse2017-02-173-0/+44
| | | | | | | | | | This makes the Geode images actually useful again. The Geos profile should include the relevant hardware for that board, and the Default profile adds the via-rhine adapter which seems to have been present in the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge all geode based subtargets into one"). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Add board configs for the PC Engines APU2Chris Blake2017-02-172-0/+8
| | | | | | | | This adds the default LED and network settings for the PC Engines APU2 when running under the x86 target. [dwmw2: Change Ethernet port setup] Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Enable DIAG LED on GeosDavid Woodhouse2017-02-172-1/+79
| | | | | | | | | Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's do it by using the LED configuration instead of hard-coding it for each board type. And try using /bin/board_detect to do the default behaviour, on the first boot where the config hasn't yet been generated. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Move Traverse Geos configs into x86 base-filesChris Blake2017-02-172-0/+0
| | | | | | | | | | This change moves the files in 657418d to the root of the x86 target. This is done in preperation for adding more devices under other subtargets. CC: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 22:05:30 +0000