aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: improve ralink ethernet driverJohn Crispin2014-10-291-458/+1434
| | | | | | | | | | | | | | | | | | | | | | | | | | | Change list: * add tx scatter gather function. * add software rx vlan offload to let GRO work. * add jumbo frame support. because use build_skb so max MTU is 3812. * enable hardware tx vlan. * enable GRO and remove LRO. because it can improve performance and can work on forwarding. * enable/fix tx padding function. * let napi handle tx clean up. * support ethtool operation. now support message level, hardware status and coalesce. * ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it. Notes: * build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a. * TCP NAT performance improve. test with netperf. - rt2880(gigabit) from 5x to 12x Mbps. - rt3x5x from 6x to 94 Mbps. - rt5250 from 5x to 8x Mbps. - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame. - mt7620 still 94Mbps. * TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43108 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: last vs tailJohn Crispin2014-10-291-1/+1
| | | | | | | | sorry ..... Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43107 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: "swconfig list" shows devices in reverse orderJohn Crispin2014-10-291-1/+1
| | | | | | | | | Boards that have more than one swconfig enabled switch will show the devices in reverse order when call swconfig list. Fix this by using list_add_tail(). Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43106 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix switch config on mt7530 evbJohn Crispin2014-10-292-0/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43105 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix a off by 4 bug in mt7530John Crispin2014-10-291-63/+112
| | | | | | | | 0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43104 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add support for DHT11 driverJohn Crispin2014-10-291-0/+20
| | | | | | | | | | | The DHT11 is a temperature and humidity sensor supported by linux since 3.14. This patch is tested on recent mxs with kernel 3.14.18. Signed-off-by: Harald Geyer <harald@ccbib.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43103 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for A5-V11 board (resubmit)John Crispin2014-10-298-0/+160
| | | | | | | | | | (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43102 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotesJohn Crispin2014-10-291-3/+7
| | | | | | | | | | lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by detecting whether vdsl_cpe_control or dsl_cpe_control should be used. Also add missing quotes around shell string comparision. Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43101 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: initial support for kernel 3.18Rafał Miłecki2014-10-2817-0/+1431
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43100 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add closing " to REGMAP_I2C's tristateHauke Mehrtens2014-10-273-3/+3
| | | | | | | | | Thanks swalker for reporting. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43099 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: remove support for fpuHauke Mehrtens2014-10-271-1/+0
| | | | | | | | | This SoC does not have a vfpv3 FPU. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43098 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: initial support for kernel 3.18Hauke Mehrtens2014-10-2730-0/+6385
| | | | | | | | | This adds initial support for kernel 3.18. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43097 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add generic config for kernel 3.18Hauke Mehrtens2014-10-271-0/+4434
| | | | | | | | | There are still many options missing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43096 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: make the kernel 3.18 patches apply and boot on arm.Hauke Mehrtens2014-10-2738-620/+383
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43095 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: make it possible to select experimental 3.18 (3.18-rc2)Rafał Miłecki2014-10-271-0/+2
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43094 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: start working on 3.18 supportRafał Miłecki2014-10-27169-0/+26505
| | | | | | | | | | | | This commit: 1) Copies 3.14 patches 2) Drops mainlined stuff 3) Modifies some patches to apply Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43093 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iwinfo: add cli support for phy lookup from uci sectionJo-Philipp Wich2014-10-271-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43092 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: 3.14: use patch that is really upstreamed for hso 0af0:9200Rafał Miłecki2014-10-273-36/+353
| | | | | | | | | Patch 060 we had in repo was never sent/accepted. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43091 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fstools: update to latest git headJohn Crispin2014-10-271-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43090 3c298f89-4303-0410-b956-a3cf2f4a3e73
* libiconv: do not replace untranslatable characters with * or ?John Crispin2014-10-271-4/+4
| | | | | | | | Instead throw an -EILSEQ error. Signed-off-by: Tjalling Hattink <t.hattink@fugro.nl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43089 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: config_generate did not handle setups with more than 1 switch ↵John Crispin2014-10-271-5/+4
| | | | | | | | properly Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43088 3c298f89-4303-0410-b956-a3cf2f4a3e73
* iwinfo: switch to external git repo, support lookup by phyname & macaddrJo-Philipp Wich2014-10-2722-14848/+10
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43087 3c298f89-4303-0410-b956-a3cf2f4a3e73
* config: use PARTUUID by default on x86_64Jo-Philipp Wich2014-10-271-3/+4
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43086 3c298f89-4303-0410-b956-a3cf2f4a3e73
* busybox: make high ASCII chars printable (#7993)Jo-Philipp Wich2014-10-272-1/+21
| | | | | | | | | | | | Currently busybox utils like "ls" fail to display filenames containing UTF-8 characters, replacing any special characters with "?". Change libbb's printable_string() function to allow high ASCII characters so that unicode filenames are displayed correctls. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43084 3c298f89-4303-0410-b956-a3cf2f4a3e73
* px5g-standalone: use /dev/urandom to initialize serial (#18232)Jo-Philipp Wich2014-10-272-4/+27
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43080 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: fix key flush handling in AP+STAFelix Fietkau2014-10-273-2/+37
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43079 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uhttpd: fix HTTP incompatibilities in file handlerJo-Philipp Wich2014-10-271-2/+2
| | | | | | | | | | | * Fixes sending an extraneous message body for 204 and 304 resoponses which breaks Chrome in keep-alive mode. * Adds mimetypes for JSON and JSONP. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43078 3c298f89-4303-0410-b956-a3cf2f4a3e73
* e2fsprogs: fix description, tune2fs is not part of the e2fsprogs packageJohn Crispin2014-10-261-2/+1
| | | | | | | | https://dev.openwrt.org/ticket/18209 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43076 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: fix WAN/LAN-MAC for TP-LINK TL-WDR4900 v1John Crispin2014-10-261-21/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This works around a bootloader issue where every device has the same lan/wan-mac 00:04:9f:ef:01:01 - with this patch we read the macs from config-partition during initial network setup. We have 9 valid macs stored in the partition, the 1st two are used for the radios, 3 and 4 are now used for WAN/LAN. on an already setup / running device we can get the real macs with . /lib/functions.sh . /lib/functions/system.sh echo "LAN = $(mtd_get_mac_binary config 338)" echo "WAN = $(mtd_get_mac_binary config 344)" see: https://dev.openwrt.org/ticket/14714 from the ticket / user klondike: U-Boot passed this commit https://gitorious.org/0xlab-kernel/u-boot/commit/ecd1a09b81f2ed6e6ba7bd1d0bfb0cc3d0ea2ad0 http://u-boot.10912.n7.nabble.com/U-Boot-PATCH-mpc83xx-remove-hardcoded-network-addresses-from-config-files-td44372.html I suppose to prevent this particular issue, but the WDR4900 may be using an old bootloader still affected. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I have been checking the contents of the dtb on the flash, this particular bit is quite revealing: ethernet@b0000 { #address-cells = <0x1>; #size-cells = <0x1>; device_type = "network"; model = "eTSEC"; compatible = "fsl,etsec2"; fsl,num_rx_queues = <0x8>; fsl,num_tx_queues = <0x8>; local-mac-address = [00 00 00 00 00 00]; ^^^^^^^^^^^^^^^^^ interrupt-parent = <0x2>; phy-handle = <0x3>; phy-connection-type = "rgmii-id"; ptimer-handle = <0x4>; queue-group@0 { #address-cells = <0x1>; #size-cells = <0x1>; reg = <0xb0000 0x1000>; rx-bit-map = <0xff>; tx-bit-map = <0xff>; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; }; }; I also have been checking the live device map to find this: root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b0000/local-mac-address 00000000 00 04 9f ef 01 01 |......| 00000006 root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b1000/local-mac-address * root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b2000/local-mac-address * My conclussion is that U-Boot most likely finds the device and (as no valid MAC-address is provided) falls back to the default MAC provided by the old code, the kernel then receives thee modified device map from U-Boot and assumes this is the correct MAC for the device despite it obviously isn't. This can be seen at target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch The enetaddr is filled up by using the device tree data by the process_boot_dtb function and used by the platform_fixups function to set the eth0 address (by calling dt_fixup_mac_address_by_alias("ethernet0", enetaddr); ). But instead we should be used the device address which to my understanding is provided in the mtd. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43074 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix filenames in PorayDualSize factory imagesJohn Crispin2014-10-261-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43073 3c298f89-4303-0410-b956-a3cf2f4a3e73
* vgv7519: support more recent board release with vrx288 v1.2John Crispin2014-10-261-1/+2
| | | | | | | | The existance of this new board has been confirmed and tested by the guy on this commit https://github.com/openwrt-vgv7519/uboot-bin/commit/76fdd8e638f81e324ffe77856481bd147398f6e8 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* comgt: fix typo in the ncm proto handlerJohn Crispin2014-10-261-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43071 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generate list of license information for packagesJohn Crispin2014-10-263-1/+31
| | | | | | | | | | | | | Many packages define already metadata about their license (PKG_LICENSE), but this is only included in the ipk files. This change allows to create the information also on the build-host, to get an overview on the used licenses. In the full list, also all packages without this info are shown Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43070 3c298f89-4303-0410-b956-a3cf2f4a3e73
* util-linux-dmesg: Add missing install sectionJohn Crispin2014-10-261-0/+6
| | | | | | | | | | | Package util-linux-dmesg is broken (at least) in Barrier Breaker git repo as you can select it within menuconfig, it will compile (as a part of util-linux) but it will not install as install section is missing from package Makefile. Signed-off-by: Tomasz Wasiak <tjwasiak@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43069 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "include/shell.sh: remove getvar()"Felix Fietkau2014-10-261-0/+4
| | | | | | | | It is more widely used than I thought. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43068 3c298f89-4303-0410-b956-a3cf2f4a3e73
* findutils: add dependency on bisonFelix Fietkau2014-10-261-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43064 3c298f89-4303-0410-b956-a3cf2f4a3e73
* broadcom-wl: align with mac80211 configJo-Philipp Wich2014-10-252-6/+15
| | | | | | | | | - Support HT40 instead of HT40+/HT40- like mac80211 - Enable 11n if htmode is HT20 or HT40 Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43063 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: add /etc/shadow to list of essential files to keep in sysupgrade ↵Felix Fietkau2014-10-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | (bug 18206) Based on bug #18206 sysupgrade can lead to loss of password information in certain situations. Most likely all users who will upgrade from versions r43017-43040, will lose their current passwords. :-( https://dev.openwrt.org/ticket/18206 Currently /etc/shadow is defined as a conffile in base-files: https://dev.openwrt.org/browser/trunk/package/base-files/Makefile#L37 But it is not defined in the default list of essential files to keep in sysupgrade: https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/keep.d/base-files-essential If exporting conffiles info fails, /etc/shadow can get lost. Shadow passwords are now the default, so saying that preserving /etc/passwd is essential while /etc/shadow is not, makes no sense. The attached patch adds /etc/shadow to the list of essential files. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43061 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools: Fix compilation on x32 hostFelix Fietkau2014-10-253-1/+166
| | | | | | | | | | | | | | | | | | Compiling the host tools on the new x32 architecture (which is an ILP32 ELF32 system on an amd64 CPU) fails for various reasons. gmp: pull same fix I applied to OpenADK, which was inspired by the fix in the Debian source package mtd-utils: write a workaround myself; only affects x32, but the use of llseek is dangerous according to the manpage, so the guard ifdef should probably go away findutils: pull fix straight from the Debian source packae Signed-off-by: Thorsten Glaser <tg@mirbsd.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43060 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: update to 2014-10-25Felix Fietkau2014-10-2531-409/+113
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43059 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: add a few calibration related fixesFelix Fietkau2014-10-253-10/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43058 3c298f89-4303-0410-b956-a3cf2f4a3e73
* odhcp6c: avoid some unnecessary big mallocsSteven Barth2014-10-251-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43056 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rtlwifi: unbreak usb driversFelix Fietkau2014-10-243-0/+174
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43052 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh 3.10 patchesFelix Fietkau2014-10-2414-83/+77
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43051 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: refresh generic 3.10 patchesFelix Fietkau2014-10-2441-104/+100
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43050 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10.49 to 3.10.58 (released 2014-oct-15)Felix Fietkau2014-10-243-68/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All platforms which are using 3.10.x at the moment are upgraded. Changelogs: https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.50 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.51 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.52 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.53 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.54 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.55 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.56 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.57 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.58 A new symbol 'X86_16BIT' appeared in 3.10.52 with commit 34273f41d57ee8d854dcd2a1d754cbb546cb548f ("x86-espfix-make-it-possible-to-disable-16-bit-support.patch") I defaults to 'unset', but it's worth a discussion to enable it ("turn off support for any 16-bit software"). Also removed the patch 0db3db45f5bd6df4bdc03bbd5dec672e16164c4e ("fix build failure on memcpy() in decompress.c") and is obsolete by commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream. included in kernel 3.10.56 compile tested on all platforms with: make tools/install make toolchain/install make target/linux/compile user@box:~/user/openwrt$ cat /tmp/log.txt [Wed Oct 22 00:36:02 CEST 2014] ./smoketest.sh: ar71xx - OK [Wed Oct 22 00:53:22 CEST 2014] ./smoketest.sh: ar7 - OK [Wed Oct 22 01:08:27 CEST 2014] ./smoketest.sh: au1000 - OK [Wed Oct 22 01:21:43 CEST 2014] ./smoketest.sh: avr32 - OK [Wed Oct 22 01:37:47 CEST 2014] ./smoketest.sh: cns21xx - OK [Wed Oct 22 01:52:05 CEST 2014] ./smoketest.sh: cns3xxx - OK [Wed Oct 22 02:10:23 CEST 2014] ./smoketest.sh: gemini - OK [Wed Oct 22 02:29:07 CEST 2014] ./smoketest.sh: ixp4xx - OK [Wed Oct 22 02:44:01 CEST 2014] ./smoketest.sh: malta - OK [Wed Oct 22 02:55:57 CEST 2014] ./smoketest.sh: mpc85xx - OK [Wed Oct 22 03:07:56 CEST 2014] ./smoketest.sh: orion - OK [Wed Oct 22 03:24:30 CEST 2014] ./smoketest.sh: ppc40x - OK [Wed Oct 22 03:40:19 CEST 2014] ./smoketest.sh: ppc44x - OK [Wed Oct 22 03:55:29 CEST 2014] ./smoketest.sh: realview - OK [Wed Oct 22 04:09:47 CEST 2014] ./smoketest.sh: sparc - OK [Wed Oct 22 04:23:37 CEST 2014] ./smoketest.sh: x86 - OK [Wed Oct 22 04:35:56 CEST 2014] ./smoketest.sh: xburst - OK run tested on x86, au1000, ar71xx, mpc85xx and brcm47xx Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43049 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netlogic: use KERNEL_PATCHVERFelix Fietkau2014-10-241-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43048 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: makefiles: make use of new var KERNEL_PATCHVERFelix Fietkau2014-10-2449-49/+49
| | | | | | | | | | | replace all occurences of LINUX_VERSION with the cleaner approach. future kernel upgrades must mostly touch only one file. the only platform left is netlogic, because it uses a intermediate kernel 3.14.16 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43047 3c298f89-4303-0410-b956-a3cf2f4a3e73
* broadcom_wl: eliminate compiler error with gcc-4.9-linaroFelix Fietkau2014-10-241-0/+21
| | | | | | | | | | | | | | | | | | | | | Attempting to build broadcom_wl (from trunk) with the linaro 4.9.x toolchain produces the following errors: <...>/wl_linux.c: In function 'wl_dump_ver': <...>/wl_linux.c:2302:3: error: macro "__DATE__" might prevent reproducible builds [-Werror=date-time] __DATE__, __TIME__, EPI_VERSION_STR); ^ <...>/wl_linux.c:2302:13: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time] __DATE__, __TIME__, EPI_VERSION_STR); ^ cc1: some warnings being treated as errors Remove the use of the __DATE__ and __TIME__ macros, as the info is not really useful. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43046 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openssl: fix target definition for x86_64 (#18182)Felix Fietkau2014-10-243-11/+12
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43045 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 08:00:36 +0000