aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* generic: Fix per interface nf_call_iptables settingFelix Fietkau2015-09-181-172/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that functionality have been disabled - eliminates the overhead of enabling CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization which should reduce/eliminate the overhead for traffic send over bridges on kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization breaks the nf_call_iptables per bridge setting which is more fine grained than the global sysctl net.bridge.bridge-nf-call-iptables setting. A test reflecting a real world setup was created to identify if this really eliminates the overhead and if per-bridge nf_call_iptables could be used in some setups to increase the throughput. A Qualcomm Atheros QCA9558 based system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used. Cables from the AP to the wifi station were used to reduce interference problems during the tests. The wlan interface was put in one bridge interface called br-wlan. This bridge usually contains some more wlan interfaces. The eth0 was put in a second bridge called br-lan. This usually contains some other privileged wlan or mesh interfaces. Routing was added between br-lan and br-wlan. Three kernels were tested: * (default) OpenWrt kernel for this device * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y * (brfilter-local) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and without 644-bridge_optimize_netfilter_hooks.patch The changes to the the netfilter settings of the bridge were done via: * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1 * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables A station connected to the wlan0 (AP) interface was used to send traffic to a PC connected via ethernet. iperf with 3 concurrent transmissions was used to generate the traffic. | kernel | br-nf-* global | nf-call* iface | download | upload | |-----------------|----------------|----------------|----------|----------| | default | 0 | - | 209 | 268 | | brfilter-global | 0 | - | 185 | 243 | | brfilter-local | 0 | - | 187 | 243 | | brfilter-local | 0 | br-lan | 157 | 226 | | brfilter-local | 0 | br-lan br-wlan | 139 | 161 | | brfilter-global | 1 | - | 136 | 162 | Download/upload results in Mibit/s It can be seen that the patch doesn't eliminate the overhead. It can also be seen that the throughput of brfilter-global and brfilter-local with disabled filtering is the roughly the same. Also the throughput for brfilter-global and brfilter-local for enabled filtering on all bridges is roughly the same. But also the brfilter-local throughput is higher when only br-lan requires the filtering. This setting would not be possible with 644-bridge_optimize_netfilter_hooks.patch applied and thus can only be compared with brfilter-global and filtering enabled for all interfaces. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Backport of r46835 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47002 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()Felix Fietkau2015-09-181-19/+26
| | | | | | | | | | | | A call to pskb_may_pull() might reallocate skb->data. Therefore we should only assign the src-pointer after any potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46721 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47001 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor ↵Felix Fietkau2015-09-181-20/+17
| | | | | | | | | | | | | | | | | | | | | | solicitation (#17625)" This reverts commit a080e8e1943156168913d0353a2e99d1151102aa. It did not fix the problem but just hid some symptom. The real issue was that IGMP/MLD report suppression was not considered for the multicast-to-unicast feature. A recent netifd which isolates IGMP/MLD reports between STAs by utilizing AP-isolation and bridge-hairpinning should have fixed this. It is perfectly fine to apply multicast-to-unicast to IPv6 Neighbor Solicitations, too (once that feature is configured correctly). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46720 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47000 3c298f89-4303-0410-b956-a3cf2f4a3e73
* netifd: update to the latest version (as of trunk r46841)Felix Fietkau2015-09-181-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46999 3c298f89-4303-0410-b956-a3cf2f4a3e73
* procd: update to latest git revisionFelix Fietkau2015-09-171-2/+2
| | | | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> Backport of r46962 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46996 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: solos-pci: Increase headroom on received packetsFelix Fietkau2015-09-171-0/+54
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46993 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46995 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: ipv6: ip6_fragment: fix headroom tests and skb leakFelix Fietkau2015-09-172-1/+102
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46992 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46994 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: firewall: depend on kmod-ipt-conntrack (#20542)Jo-Philipp Wich2015-09-171-1/+1
| | | | | | | | | | | Our ruleset requires kernel support for conntrack state matching, therfore depend on the require kmod. Fixes #20542. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> Backport of r46990 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46991 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86/geode: enable DMI and Geos support (fixes #20512)Felix Fietkau2015-09-171-0/+5
| | | | | | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Backport of r46986 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46988 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: fix Geode LX timekeeping (#20531)Felix Fietkau2015-09-171-0/+61
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46985 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46987 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ppp: backport use a more reliable way to set script environmentSteven Barth2015-09-151-1/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46943 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: replace the opkg key with the one used for the final imageFelix Fietkau2015-09-142-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix chunked-io support for big flash chips (#20504)Felix Fietkau2015-09-141-3/+6
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46904 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46905 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add NAND flash chip description for Asus RT-AC87URafał Miłecki2015-09-145-4/+39
| | | | | | | | | | | This isn't that important due to different NAND driver but keeps DTS and backports consistent. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Inspired by r46892 (trunk). git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46902 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath10k: reduce dma burst size on newer firmware to fix crashesFelix Fietkau2015-09-131-0/+24
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46900 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46901 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: drop some left XHCI patch for 4.0Rafał Miłecki2015-09-111-46/+0
| | | | | | | | It was accidentally added in r46094. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46849 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: opkg: ensure image provided feeds are available after sysupgradeJonas Gorski2015-09-113-4/+21
| | | | | | | | | | | | | | | | | | | | | | | Split the opkg.conf into three files, to make it easier to support custom feeds and configs: * /etc/opkg.conf -> base opkg configuration * /etc/opkg/distfeeds.conf -> default Openwrt package feeds * /etc/opkg/customfeeds.conf -> custom package feeds Of these three, only the base opkg.conf and the customfeeds.conf is marked as to be kept, so that the distfeeds.conf from the image is always used. To ease migration, a script is added that moves any feeds from /etc/opkg.conf to /etc/opkg/customfeeds.conf on first boot. Also ensure that any keys used for verification are also kept in upgrade. Backport of r46491. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46848 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: kernel: update 3.18 to 3.18.21Jonas Gorski2015-09-1117-44/+38
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21 Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: delete from CC branch; it is broken and unsupportedFelix Fietkau2015-09-1161-10913/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46845 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: restore 640-bridge_no_eap_forward.patch to its original formFelix Fietkau2015-09-081-1/+1
| | | | | | | | | | | | It was corrupted in r38528. The most obvious symptom is repeated messages like this: Tue Sep 8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address Signed-off-by: Dmitry Ivanov <dima@ubnt.com> Backport of r46821 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46822 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: apply serial flash size trick to Netgear WNR1000 V3Rafał Miłecki2015-09-081-2/+3
| | | | | | | | | | It also uses different block size just like WGR614 V10. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Backport of r46810 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46812 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: add Netgear WNR1000 V3 support in the Linux arch codeRafał Miłecki2015-09-081-2/+40
| | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Backport of r46805 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46811 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uhttpd: update to the latest version, fixes deferred cgi script processing ↵Felix Fietkau2015-09-071-2/+2
| | | | | | | | | | (#20458) Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46807 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix devicetree corruption with some boot loaders if the caches are ↵v15.05Felix Fietkau2015-09-021-0/+18
| | | | | | | | | | not ready at boot Signed-off-by: John Crispin <blogic@openwrt.org> Backport of r46766 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46767 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: hostapd: properly enable 802.11w supportHauke Mehrtens2015-08-291-1/+1
| | | | | | | | | | | | | | backport of r46737 Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w support is properly compiled in full variant. This fixes #20179 Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46751 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: broadcom-wl: add interface after bridge is upHauke Mehrtens2015-08-291-0/+1
| | | | | | | | | | | | | | | backport of r46749 Without this patch adding the wifi device to the bridge may fail because the bridge is not already configured when the wifi device gets configured. This patch makes broadcom-wl wait till the bridge is ready. This fixes #17262 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46750 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: broadcom-wl: fix bash comparison errorHauke Mehrtens2015-08-291-1/+1
| | | | | | | | | | | | Backport of r46746 This fixes #17495 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46748 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: broadcom-wl: fix section mismatches in broadcom-wl driverHauke Mehrtens2015-08-291-0/+74
| | | | | | | | | Backport of r46745 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46747 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix Linksys E1200 V2 image filenameRafał Miłecki2015-08-291-1/+1
| | | | | | | | | | Drop unwanted suffix (copy & paste mistake). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Backport of r46742 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46743 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: add pending brcmfmac patch fixing warm rebootsRafał Miłecki2015-08-271-0/+193
| | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Backport of r46739 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46740 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: update brcmfmac to the latest versionRafał Miłecki2015-08-2627-12/+2281
| | | | | | | | | | | This also adds one patchset of pending changes that fix support for multiple interfaces. It was somehow broken. Driver couldn't correctly match firmware and system interfaces resulting in not working APs and WARNINGs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46736 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: group last brcmfmac changes into (half) patchsetRafał Miłecki2015-08-265-0/+0
| | | | | | | | This prepares some place for backporting extra patches. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46735 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add support for Netgear R7000Rafał Miłecki2015-08-266-0/+177
| | | | | | | | Backport of r46363 r46730 r46731 r46732. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46733 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: brcm63xx: fix WAP-5813n default network configJonas Gorski2015-08-261-1/+1
| | | | | | | | | | | | | /etc/uci-defaults/02_network had a typo, making it generate the wrong network config. Closes #20407. Backport of r46727. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46728 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabledJonas Gorski2015-08-231-0/+35
| | | | | | | | | | | Properly treat -ENOSYS as no PHY, else ehci-orion won't work without generic phy support. Backport of r46711. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46712 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: mac80211: disable ipw2x00 for big endian targetsJonas Gorski2015-08-231-1/+1
| | | | | | | | | | | | | | | The ipw2x00 drivers assume that the system they are running is little endian, and access everything in native byte order. When run on a big endian system, everything breaks apart. Since fixing this is non trivial on a first glance, disable them for big endian targets. Backport of r46708. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46710 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: brcm63xx: ensure dummy byte is set for mapped spi flash with fast readJonas Gorski2015-08-239-39/+60
| | | | | | | | | | | | | | | Some CFEs seem to misconfigure the mapped memory flash access with fast read but without a dummy byte, causing all accesses to be prefixed with 0xff. This of course breaks reading out the nvram, so do not just move back to single i/o accessors, but also ensure that the dummy byte is correctly set. Backport of r46707. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46709 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvebu: fix cobra chainmask (backport of r46697)Imre Kaloz2015-08-211-2/+2
| | | | | | | | | | Thanks Sebastian for spotting it. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46698 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mwlwifi: downgrade to 10.3.0.3-20150804Imre Kaloz2015-08-201-2/+2
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46695 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mwlwifi: fix commit hash for 10.3.0.8Imre Kaloz2015-08-191-2/+2
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46692 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvebu: add support for the Linksys boot counter (backport of r46690)Imre Kaloz2015-08-197-15/+149
| | | | | | | | | | | | | | | The u-boot boot counter was never reset after a successful boot, which sometimes could make some variables become out of sync. This patch adds support for the boot counter and enables auto_recovery unconditionally. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46691 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uhttpd: we don't know where the device is located, so reflect that in the certImre Kaloz2015-08-191-3/+3
| | | | | | | | | | backport of r46688 Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46689 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mwlwifi: upgrade to 10.3.0.8-20150818Imre Kaloz2015-08-181-1/+3
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46686 3c298f89-4303-0410-b956-a3cf2f4a3e73
* xz: update to version 5.2.1Hauke Mehrtens2015-08-171-2/+2
| | | | | | | | | | | | Backport of 46603. This adds support for symbol versioning which is needed on CentOs/RedHat 7 to fix #20134. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: kernel: update 3.18 to 3.18.20Hauke Mehrtens2015-08-1712-42/+34
| | | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46680 3c298f89-4303-0410-b956-a3cf2f4a3e73
* procd: fix seccomp build on some architecturesHauke Mehrtens2015-08-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of r46612. fix generating syscall-names.h Sometimes the syscall number is not defined with a number but with an offset to an other syscall and then make_syscall_h.sh created some broken header file. For example the bit/syscall.h from musl for i386 has this: #define __NR_timer_create 259 #define __NR_timer_settime (__NR_timer_create+1) With this patch the resulting array looks like this: [259] = "timer_create", [(__NR_timer_create+1)] = "timer_settime", This closes #20195. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46679 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: uhttpd: pass X-HTTP-Method-Override header to cgi scriptsJo-Philipp Wich2015-08-171-2/+2
| | | | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> Backport of r46677 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46678 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ugps: update to latest git HEADJohn Crispin2015-08-171-2/+2
| | | | | | | | | | | | fixes 2 bugs * typo * use %04d rather than %d when printing the position Signed-off-by: John Crispin <blogic@openwrt.org> Backport of r46666 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46675 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Black SwiftJohn Crispin2015-08-1710-0/+172
| | | | | | | | | | | | Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patch Signed-off-by: Bruno Randolf <br1@einfach.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46674 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.John Crispin2015-08-171-0/+4
| | | | | | | | Kinda-backport of r46415, though this patch uses the old-style calibration data loading. Signed-off-by: Christian Beier <cb@shoutrlabs.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46673 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 08:50:46 +0000