aboutsummaryrefslogtreecommitdiffstats
path: root/tools/firmware-utils/src/trx2edips.c
diff options
context:
space:
mode:
Diffstat (limited to 'tools/firmware-utils/src/trx2edips.c')
-rw-r--r--tools/firmware-utils/src/trx2edips.c4
1 files changed, 4 insertions, 0 deletions
diff --git a/tools/firmware-utils/src/trx2edips.c b/tools/firmware-utils/src/trx2edips.c
index f8d068d502..14c4eb70ba 100644
--- a/tools/firmware-utils/src/trx2edips.c
+++ b/tools/firmware-utils/src/trx2edips.c
@@ -140,6 +140,10 @@ int main(int argc, char *argv[])
rewind(fpIn);
/* read the whole file*/
res = fread(buf, 1, length, fpIn);
+ if (res != length) {
+ fprintf(stderr, "Unable to fread from input file\n");
+ return EXIT_FAILURE;
+ }
p = (struct trx_header *)buf;
if (LOAD32_LE(p->magic) != TRX_MAGIC) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 03:04:34 +0000
106'>106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 
From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 18 Jul 2010 15:11:26 +0200
Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console

Do not use the CFE console. It causes hangs on some devices like the
Buffalo WHR-HP-G54.
This was reported in https://dev.openwrt.org/ticket/4061 and
https://forum.openwrt.org/viewtopic.php?id=17063

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 arch/mips/Kconfig        |    1 -
 arch/mips/bcm47xx/prom.c |   82 +++------------------------------------------
 2 files changed, 6 insertions(+), 77 deletions(-)

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -118,7 +118,6 @@ config BCM47XX
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
 	help
 	 Support for BCM47XX based boards
 
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -33,96 +33,28 @@
 #include <asm/fw/cfe/cfe_api.h>
 #include <asm/fw/cfe/cfe_error.h>
 
-static int cfe_cons_handle;
-
 const char *get_system_type(void)
 {
 	return "Broadcom BCM47XX";
 }
 
-void prom_putchar(char c)
-{
-	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
-		;
-}
-
-static __init void prom_init_cfe(void)
+static __init int prom_init_cfe(void)
 {
 	uint32_t cfe_ept;
 	uint32_t cfe_handle;
 	uint32_t cfe_eptseal;
-	int argc = fw_arg0;
-	char **envp = (char **) fw_arg2;
-	int *prom_vec = (int *) fw_arg3;
-
-	/*
-	 * Check if a loader was used; if NOT, the 4 arguments are
-	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
-	 */
-	if (argc < 0) {
-		cfe_handle = (uint32_t)argc;
-		cfe_ept = (uint32_t)envp;
-		cfe_eptseal = (uint32_t)prom_vec;
-	} else {
-		if ((int)prom_vec < 0) {
-			/*
-			 * Old loader; all it gives us is the handle,
-			 * so use the "known" entrypoint and assume
-			 * the seal.
-			 */
-			cfe_handle = (uint32_t)prom_vec;
-			cfe_ept = 0xBFC00500;
-			cfe_eptseal = CFE_EPTSEAL;
-		} else {
-			/*
-			 * Newer loaders bundle the handle/ept/eptseal
-			 * Note: prom_vec is in the loader's useg
-			 * which is still alive in the TLB.
-			 */
-			cfe_handle = prom_vec[0];
-			cfe_ept = prom_vec[2];
-			cfe_eptseal = prom_vec[3];
-		}
-	}
+
+	cfe_eptseal = (uint32_t) fw_arg3;
+	cfe_handle = (uint32_t) fw_arg0;
+	cfe_ept = (uint32_t) fw_arg2;
 
 	if (cfe_eptseal != CFE_EPTSEAL) {
-		/* too early for panic to do any good */
 		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
-		while (1) ;
+		return -1;
 	}
 
 	cfe_init(cfe_handle, cfe_ept);
-}
-
-static __init void prom_init_console(void)
-{
-	/* Initialize CFE console */
-	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
-}
-
-static __init void prom_init_cmdline(void)
-{
-	static char buf[COMMAND_LINE_SIZE] __initdata;
-
-	/* Get the kernel command line from CFE */
-	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
-		buf[COMMAND_LINE_SIZE - 1] = 0;
-		strcpy(arcs_cmdline, buf);
-	}
-
-	/* Force a console handover by adding a console= argument if needed,
-	 * as CFE is not available anymore later in the boot process. */
-	if ((strstr(arcs_cmdline, "console=")) == NULL) {
-		/* Try to read the default serial port used by CFE */
-		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
-		    || (strncmp("uart", buf, 4)))
-			/* Default to uart0 */
-			strcpy(buf, "uart0");
-
-		/* Compute the new command line */
-		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
-			 arcs_cmdline, buf[4]);
-	}
+	return 0;
 }
 
 static __init void prom_init_mem(void)
@@ -173,8 +105,6 @@ static __init void prom_init_mem(void)
 void __init prom_init(void)
 {
 	prom_init_cfe();
-	prom_init_console();
-	prom_init_cmdline();
 	prom_init_mem();
 }