aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/brcm47xx/patches-2.6.39/031-ssb-add-callback-for-sprom.patch146
-rw-r--r--target/linux/brcm47xx/patches-2.6.39/220-bcm5354.patch6
-rw-r--r--target/linux/brcm47xx/patches-2.6.39/240-ssb_no_sprom_on_pci.patch28
-rw-r--r--target/linux/brcm47xx/patches-2.6.39/250-ssb_fix_ssb_clock_rate.patch25
-rw-r--r--target/linux/brcm47xx/patches-2.6.39/976-ssb_increase_pci_delay.patch2
-rw-r--r--target/linux/brcm63xx/patches-2.6.39/500-ssb-add-callback-for-sprom.patch111
-rw-r--r--target/linux/generic/config-2.6.392
-rw-r--r--target/linux/generic/patches-2.6.39/020-ssb_update.patch919
-rw-r--r--target/linux/generic/patches-2.6.39/021-ssb_commit_settings_export.patch77
-rw-r--r--target/linux/generic/patches-2.6.39/022-ssb_pcicore_build_breakage.patch49
-rw-r--r--target/linux/generic/patches-2.6.39/025-bcma_backport.patch2514
11 files changed, 3492 insertions, 387 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.39/031-ssb-add-callback-for-sprom.patch b/target/linux/brcm47xx/patches-2.6.39/031-ssb-add-callback-for-sprom.patch
deleted file mode 100644
index bf19ae0b98..0000000000
--- a/target/linux/brcm47xx/patches-2.6.39/031-ssb-add-callback-for-sprom.patch
+++ /dev/null
@@ -1,146 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -643,6 +643,17 @@ static struct ssb_sprom bcm63xx_sprom =
- .boardflags_lo = 0x2848,
- .boardflags_hi = 0x0000,
- };
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+ if (bus->bustype == SSB_BUSTYPE_PCI) {
-+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+ return 0;
-+ } else {
-+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+ return -EINVAL;
-+ }
-+}
- #endif
-
- /*
-@@ -793,8 +804,9 @@ void __init board_prom_init(void)
- if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
-- printk(KERN_ERR "failed to register fallback SPROM\n");
-+ if (ssb_arch_register_fallback_sprom(
-+ &bcm63xx_get_fallback_sprom) < 0)
-+ printk(KERN_ERR PFX "failed to register fallback SPROM\n");
- }
- #endif
- }
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus
- static int ssb_pci_sprom_get(struct ssb_bus *bus,
- struct ssb_sprom *sprom)
- {
-- const struct ssb_sprom *fallback;
- int err;
- u16 *buf;
-
-@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_
- if (err) {
- /* All CRC attempts failed.
- * Maybe there is no SPROM on the device?
-- * If we have a fallback, use that. */
-- fallback = ssb_get_fallback_sprom();
-- if (fallback) {
-- memcpy(sprom, fallback, sizeof(*sprom));
-+ * Now we ask the arch code if there is some sprom
-+ * avaliable for this device in some other storage */
-+ err = ssb_fill_sprom_with_fallback(bus, sprom);
-+ if (err) {
-+ ssb_printk(KERN_WARNING PFX "WARNING: Using"
-+ " fallback SPROM failed (err %d)\n",
-+ err);
-+ } else {
-+ ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
-+ " revision %d provided by"
-+ " platform.\n", sprom->revision);
- err = 0;
- goto out_free;
- }
---- a/drivers/ssb/sprom.c
-+++ b/drivers/ssb/sprom.c
-@@ -17,7 +17,7 @@
- #include <linux/slab.h>
-
-
--static const struct ssb_sprom *fallback_sprom;
-+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
-
-
- static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
-@@ -145,13 +145,14 @@ out:
- }
-
- /**
-- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
-+ * ssb_arch_register_fallback_sprom - Registers a method providing a fallback
-+ * SPROM if no SPROM is found.
- *
-- * @sprom: The SPROM data structure to register.
-+ * @sprom_callback: The callbcak function.
- *
-- * With this function the architecture implementation may register a fallback
-- * SPROM data structure. The fallback is only used for PCI based SSB devices,
-- * where no valid SPROM can be found in the shadow registers.
-+ * With this function the architecture implementation may register a callback
-+ * handler which wills the SPROM data structure. The fallback is only used for
-+ * PCI based SSB devices, where no valid SPROM can be found in the shadow registers.
- *
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
-@@ -163,18 +164,21 @@ out:
- *
- * This function is available for architecture code, only. So it is not exported.
- */
--int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
-+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus, struct ssb_sprom *out))
- {
-- if (fallback_sprom)
-+ if (get_fallback_sprom)
- return -EEXIST;
-- fallback_sprom = sprom;
-+ get_fallback_sprom = sprom_callback;
-
- return 0;
- }
-
--const struct ssb_sprom *ssb_get_fallback_sprom(void)
-+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-- return fallback_sprom;
-+ if (!get_fallback_sprom)
-+ return -ENOENT;
-+
-+ return get_fallback_sprom(bus, out);
- }
-
- /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -171,7 +171,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
- const char *buf, size_t count,
- int (*sprom_check_crc)(const u16 *sprom, size_t size),
- int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
--extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
-+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out);
-
-
- /* core.c */
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struc
-
- /* Set a fallback SPROM.
- * See kdoc at the function definition for complete documentation. */
--extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
-+extern int ssb_arch_register_fallback_sprom(
-+ int (*sprom_callback)(struct ssb_bus *bus,
-+ struct ssb_sprom *out));
-
- /* Suspend a SSB bus.
- * Call this from the parent bus suspend routine. */
diff --git a/target/linux/brcm47xx/patches-2.6.39/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.39/220-bcm5354.patch
index e1d5d90ebc..d68534fb65 100644
--- a/target/linux/brcm47xx/patches-2.6.39/220-bcm5354.patch
+++ b/target/linux/brcm47xx/patches-2.6.39/220-bcm5354.patch
@@ -1,6 +1,6 @@
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
-@@ -285,6 +285,8 @@ void ssb_chipco_resume(struct ssb_chipco
+@@ -317,6 +317,8 @@ void ssb_chipco_resume(struct ssb_chipco
void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
@@ -9,7 +9,7 @@
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
switch (*plltype) {
-@@ -308,6 +310,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+@@ -340,6 +342,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
@@ -31,7 +31,7 @@
}
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
-@@ -1103,6 +1103,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -1104,6 +1104,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
if (bus->chip_id == 0x5365) {
rate = 100000000;
diff --git a/target/linux/brcm47xx/patches-2.6.39/240-ssb_no_sprom_on_pci.patch b/target/linux/brcm47xx/patches-2.6.39/240-ssb_no_sprom_on_pci.patch
new file mode 100644
index 0000000000..52c8fe95f3
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.39/240-ssb_no_sprom_on_pci.patch
@@ -0,0 +1,28 @@
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -412,16 +412,6 @@ static int __devinit pcicore_is_in_hostm
+ * Workarounds.
+ **************************************************/
+
+-static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
+-{
+- u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
+- if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
+- tmp &= ~0xF000;
+- tmp |= (pc->dev->core_index << 12);
+- pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
+- }
+-}
+-
+ static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
+ {
+ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+@@ -529,8 +519,6 @@ void __devinit ssb_pcicore_init(struct s
+ if (!ssb_device_is_enabled(dev))
+ ssb_device_enable(dev, 0);
+
+- ssb_pcicore_fix_sprom_core_index(pc);
+-
+ #ifdef CONFIG_SSB_PCICORE_HOSTMODE
+ pc->hostmode = pcicore_is_in_hostmode(pc);
+ if (pc->hostmode)
diff --git a/target/linux/brcm47xx/patches-2.6.39/250-ssb_fix_ssb_clock_rate.patch b/target/linux/brcm47xx/patches-2.6.39/250-ssb_fix_ssb_clock_rate.patch
new file mode 100644
index 0000000000..fe6507b8de
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.39/250-ssb_fix_ssb_clock_rate.patch
@@ -0,0 +1,25 @@
+From 974353557959d8ec1c022511cd1b3eeaa7ed482a Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 4 Jun 2011 15:55:24 +0200
+Subject: [PATCH 15/15] ssb: fix ssb clock rate according to broadcom source
+
+This fix was done according to si_clock_rate function in broadcom siutils.c
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/ssb/main.c | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -1002,8 +1002,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
+ switch (plltype) {
+ case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
+ if (m & SSB_CHIPCO_CLK_T6_MMASK)
+- return SSB_CHIPCO_CLK_T6_M0;
+- return SSB_CHIPCO_CLK_T6_M1;
++ return SSB_CHIPCO_CLK_T6_M1;
++ return SSB_CHIPCO_CLK_T6_M0;
+ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
diff --git a/target/linux/brcm47xx/patches-2.6.39/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-2.6.39/976-ssb_increase_pci_delay.patch
index af67367b1d..0650c25683 100644
--- a/target/linux/brcm47xx/patches-2.6.39/976-ssb_increase_pci_delay.patch
+++ b/target/linux/brcm47xx/patches-2.6.39/976-ssb_increase_pci_delay.patch
@@ -1,6 +1,6 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
-@@ -370,7 +370,7 @@ static void ssb_pcicore_init_hostmode(st
+@@ -375,7 +375,7 @@ static void __devinit ssb_pcicore_init_h
set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
diff --git a/target/linux/brcm63xx/patches-2.6.39/500-ssb-add-callback-for-sprom.patch b/target/linux/brcm63xx/patches-2.6.39/500-ssb-add-callback-for-sprom.patch
index e7d2823306..23f4d94aa1 100644
--- a/target/linux/brcm63xx/patches-2.6.39/500-ssb-add-callback-for-sprom.patch
+++ b/target/linux/brcm63xx/patches-2.6.39/500-ssb-add-callback-for-sprom.patch
@@ -30,114 +30,3 @@
}
#endif
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus
- static int ssb_pci_sprom_get(struct ssb_bus *bus,
- struct ssb_sprom *sprom)
- {
-- const struct ssb_sprom *fallback;
- int err;
- u16 *buf;
-
-@@ -707,10 +706,14 @@ static int ssb_pci_sprom_get(struct ssb_
- if (err) {
- /* All CRC attempts failed.
- * Maybe there is no SPROM on the device?
-- * If we have a fallback, use that. */
-- fallback = ssb_get_fallback_sprom();
-- if (fallback) {
-- memcpy(sprom, fallback, sizeof(*sprom));
-+ * Now we ask the arch code if there is some sprom
-+ * avaliable for this device in some other storage */
-+ err = ssb_fill_sprom_with_fallback(bus, sprom);
-+ if (err) {
-+ ssb_printk(KERN_WARNING PFX "WARNING: Using"
-+ " fallback SPROM failed (err %d)\n",
-+ err);
-+ } else {
- err = 0;
- goto out_free;
- }
---- a/drivers/ssb/sprom.c
-+++ b/drivers/ssb/sprom.c
-@@ -17,7 +17,7 @@
- #include <linux/slab.h>
-
-
--static const struct ssb_sprom *fallback_sprom;
-+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
-
-
- static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
-@@ -145,13 +145,14 @@ out:
- }
-
- /**
-- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
-+ * ssb_arch_register_fallback_sprom - Registers a method providing a fallback
-+ * SPROM if no SPROM is found.
- *
-- * @sprom: The SPROM data structure to register.
-+ * @sprom_callback: The callbcak function.
- *
-- * With this function the architecture implementation may register a fallback
-- * SPROM data structure. The fallback is only used for PCI based SSB devices,
-- * where no valid SPROM can be found in the shadow registers.
-+ * With this function the architecture implementation may register a callback
-+ * handler which wills the SPROM data structure. The fallback is only used for
-+ * PCI based SSB devices, where no valid SPROM can be found in the shadow registers.
- *
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
-@@ -163,18 +164,21 @@ out:
- *
- * This function is available for architecture code, only. So it is not exported.
- */
--int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
-+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus, struct ssb_sprom *out))
- {
-- if (fallback_sprom)
-+ if (get_fallback_sprom)
- return -EEXIST;
-- fallback_sprom = sprom;
-+ get_fallback_sprom = sprom_callback;
-
- return 0;
- }
-
--const struct ssb_sprom *ssb_get_fallback_sprom(void)
-+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-- return fallback_sprom;
-+ if (!get_fallback_sprom)
-+ return -ENOENT;
-+
-+ return get_fallback_sprom(bus, out);
- }
-
- /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -171,7 +171,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
- const char *buf, size_t count,
- int (*sprom_check_crc)(const u16 *sprom, size_t size),
- int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
--extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
-+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out);
-
-
- /* core.c */
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struc
-
- /* Set a fallback SPROM.
- * See kdoc at the function definition for complete documentation. */
--extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
-+extern int ssb_arch_register_fallback_sprom(
-+ int (*sprom_callback)(struct ssb_bus *bus,
-+ struct ssb_sprom *out));
-
- /* Suspend a SSB bus.
- * Call this from the parent bus suspend routine. */
diff --git a/target/linux/generic/config-2.6.39 b/target/linux/generic/config-2.6.39
index ff33e3c8ed..0dceb014db 100644
--- a/target/linux/generic/config-2.6.39
+++ b/target/linux/generic/config-2.6.39
@@ -179,6 +179,8 @@ CONFIG_BASE_SMALL=0
# CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set
# CONFIG_BCM63XX_PHY is not set
+# CONFIG_BCMA is not set
+CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCM_WIMAX is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BE2ISCSI is not set
diff --git a/target/linux/generic/patches-2.6.39/020-ssb_update.patch b/target/linux/generic/patches-2.6.39/020-ssb_update.patch
new file mode 100644
index 0000000000..1ee3ad9556
--- /dev/null
+++ b/target/linux/generic/patches-2.6.39/020-ssb_update.patch
@@ -0,0 +1,919 @@
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb
+ if (!ccdev)
+ return;
+ bus = ccdev->bus;
++
++ /* We support SLOW only on 6..9 */
++ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
++ mode = SSB_CLKMODE_DYNAMIC;
++
++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
++ return; /* PMU controls clockmode, separated function needed */
++ SSB_WARN_ON(ccdev->id.revision >= 20);
++
+ /* chipcommon cores prior to rev6 don't support dynamic clock control */
+ if (ccdev->id.revision < 6)
+ return;
+- /* chipcommon cores rev10 are a whole new ball game */
++
++ /* ChipCommon cores rev10+ need testing */
+ if (ccdev->id.revision >= 10)
+ return;
++
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+ switch (mode) {
+- case SSB_CLKMODE_SLOW:
++ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ break;
+ case SSB_CLKMODE_FAST:
+- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
+- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+- tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
+- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
++ if (ccdev->id.revision < 10) {
++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
++ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
++ } else {
++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
++ SSB_CHIPCO_SYSCLKCTL_FORCEHT));
++ /* udelay(150); TODO: not available in early init */
++ }
+ break;
+ case SSB_CLKMODE_DYNAMIC:
+- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
+- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+- if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
+- tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+-
+- /* for dynamic control, we have to release our xtal_pu "force on" */
+- if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
+- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
++ if (ccdev->id.revision < 10) {
++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
++ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
++ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
++ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
++
++ /* For dynamic control, we have to release our xtal_pu
++ * "force on" */
++ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
++ } else {
++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
++ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
++ }
+ break;
+ default:
+ SSB_WARN_ON(1);
+@@ -260,6 +286,12 @@ void ssb_chipcommon_init(struct ssb_chip
+ if (cc->dev->id.revision >= 11)
+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++
++ if (cc->dev->id.revision >= 20) {
++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
++ }
++
+ ssb_pmu_init(cc);
+ chipco_powercontrol_init(cc);
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc
+ u32 min_msk = 0, max_msk = 0;
+ unsigned int i;
+ const struct pmu_res_updown_tab_entry *updown_tab = NULL;
+- unsigned int updown_tab_size;
++ unsigned int updown_tab_size = 0;
+ const struct pmu_res_depend_tab_entry *depend_tab = NULL;
+- unsigned int depend_tab_size;
++ unsigned int depend_tab_size = 0;
+
+ switch (bus->chip_id) {
+ case 0x4312:
++ min_msk = 0xCBB;
++ break;
+ case 0x4322:
+ /* We keep the default settings:
+ * min_msk = 0xCBB
+--- a/drivers/ssb/driver_gige.c
++++ b/drivers/ssb/driver_gige.c
+@@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige
+ gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
+ }
+
+-static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+- int reg, int size, u32 *val)
++static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus,
++ unsigned int devfn, int reg,
++ int size, u32 *val)
+ {
+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
+ unsigned long flags;
+@@ -136,8 +137,9 @@ static int ssb_gige_pci_read_config(stru
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+-static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+- int reg, int size, u32 val)
++static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus,
++ unsigned int devfn, int reg,
++ int size, u32 val)
+ {
+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
+ unsigned long flags;
+@@ -166,7 +168,8 @@ static int ssb_gige_pci_write_config(str
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+-static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
++static int __devinit ssb_gige_probe(struct ssb_device *sdev,
++ const struct ssb_device_id *id)
+ {
+ struct ssb_gige *dev;
+ u32 base, tmslow, tmshigh;
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -15,6 +15,11 @@
+
+ #include "ssb_private.h"
+
++static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
++static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
++ u8 address, u16 data);
+
+ static inline
+ u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
+@@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
+ return ssb_mips_irq(extpci_core->dev) + 2;
+ }
+
+-static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
++static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
+ {
+ u32 val;
+
+@@ -374,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st
+ register_pci_controller(&ssb_pcicore_controller);
+ }
+
+-static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
++static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
+ {
+ struct ssb_bus *bus = pc->dev->bus;
+ u16 chipid_top;
+@@ -403,28 +408,129 @@ static int pcicore_is_in_hostmode(struct
+ }
+ #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
+
++/**************************************************
++ * Workarounds.
++ **************************************************/
++
++static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
++{
++ u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
++ if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
++ tmp &= ~0xF000;
++ tmp |= (pc->dev->core_index << 12);
++ pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
++ }
++}
++
++static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
++{
++ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
++}
++
++static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
++{
++ const u8 serdes_pll_device = 0x1D;
++ const u8 serdes_rx_device = 0x1F;
++ u16 tmp;
++
++ ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
++ ssb_pcicore_polarity_workaround(pc));
++ tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
++ if (tmp & 0x4000)
++ ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
++}
++
++static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
++{
++ struct ssb_device *pdev = pc->dev;
++ struct ssb_bus *bus = pdev->bus;
++ u32 tmp;
++
++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
++ tmp |= SSB_PCICORE_SBTOPCI_PREF;
++ tmp |= SSB_PCICORE_SBTOPCI_BURST;
++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
++
++ if (pdev->id.revision < 5) {
++ tmp = ssb_read32(pdev, SSB_IMCFGLO);
++ tmp &= ~SSB_IMCFGLO_SERTO;
++ tmp |= 2;
++ tmp &= ~SSB_IMCFGLO_REQTO;
++ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
++ ssb_write32(pdev, SSB_IMCFGLO, tmp);
++ ssb_commit_settings(bus);
++ } else if (pdev->id.revision >= 11) {
++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
++ tmp |= SSB_PCICORE_SBTOPCI_MRM;
++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
++ }
++}
++
++static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
++{
++ u32 tmp;
++ u8 rev = pc->dev->id.revision;
++
++ if (rev == 0 || rev == 1) {
++ /* TLP Workaround register. */
++ tmp = ssb_pcie_read(pc, 0x4);
++ tmp |= 0x8;
++ ssb_pcie_write(pc, 0x4, tmp);
++ }
++ if (rev == 1) {
++ /* DLLP Link Control register. */
++ tmp = ssb_pcie_read(pc, 0x100);
++ tmp |= 0x40;
++ ssb_pcie_write(pc, 0x100, tmp);
++ }
++
++ if (rev == 0) {
++ const u8 serdes_rx_device = 0x1F;
++
++ ssb_pcie_mdio_write(pc, serdes_rx_device,
++ 2 /* Timer */, 0x8128);
++ ssb_pcie_mdio_write(pc, serdes_rx_device,
++ 6 /* CDR */, 0x0100);
++ ssb_pcie_mdio_write(pc, serdes_rx_device,
++ 7 /* CDR BW */, 0x1466);
++ } else if (rev == 3 || rev == 4 || rev == 5) {
++ /* TODO: DLLP Power Management Threshold */
++ ssb_pcicore_serdes_workaround(pc);
++ /* TODO: ASPM */
++ } else if (rev == 7) {
++ /* TODO: No PLL down */
++ }
++
++ if (rev >= 6) {
++ /* Miscellaneous Configuration Fixup */
++ tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
++ if (!(tmp & 0x8000))
++ pcicore_write16(pc, SSB_PCICORE_SPROM(5),
++ tmp | 0x8000);
++ }
++}
+
+ /**************************************************
+ * Generic and Clientmode operation code.
+ **************************************************/
+
+-static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
++static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
+ {
+ /* Disable PCI interrupts. */
+ ssb_write32(pc->dev, SSB_INTVEC, 0);
+ }
+
+-void ssb_pcicore_init(struct ssb_pcicore *pc)
++void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
+ {
+ struct ssb_device *dev = pc->dev;
+- struct ssb_bus *bus;
+
+ if (!dev)
+ return;
+- bus = dev->bus;
+ if (!ssb_device_is_enabled(dev))
+ ssb_device_enable(dev, 0);
+
++ ssb_pcicore_fix_sprom_core_index(pc);
++
+ #ifdef CONFIG_SSB_PCICORE_HOSTMODE
+ pc->hostmode = pcicore_is_in_hostmode(pc);
+ if (pc->hostmode)
+@@ -432,6 +538,13 @@ void ssb_pcicore_init(struct ssb_pcicore
+ #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
+ if (!pc->hostmode)
+ ssb_pcicore_init_clientmode(pc);
++
++ /* Additional PCIe always once-executed workarounds */
++ if (dev->id.coreid == SSB_DEV_PCIE) {
++ ssb_pcicore_serdes_workaround(pc);
++ /* TODO: ASPM */
++ /* TODO: Clock Request Update */
++ }
+ }
+
+ static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
+@@ -446,11 +559,35 @@ static void ssb_pcie_write(struct ssb_pc
+ pcicore_write32(pc, 0x134, data);
+ }
+
+-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+- u8 address, u16 data)
++static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
++{
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ u32 v;
++ int i;
++
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 17); /* Turnaround */
++ v |= (0x1F << 18);
++ v |= (phy << 4);
++ pcicore_write32(pc, mdio_data, v);
++
++ udelay(10);
++ for (i = 0; i < 200; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */)
++ break;
++ msleep(1);
++ }
++}
++
++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
+ {
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
++ int max_retries = 10;
++ u16 ret = 0;
+ u32 v;
+ int i;
+
+@@ -458,46 +595,68 @@ static void ssb_pcie_mdio_write(struct s
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
+
++ if (pc->dev->id.revision >= 10) {
++ max_retries = 200;
++ ssb_pcie_mdio_set_phy(pc, device);
++ }
++
+ v = (1 << 30); /* Start of Transaction */
+- v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 29); /* Read Transaction */
+ v |= (1 << 17); /* Turnaround */
+- v |= (u32)device << 22;
++ if (pc->dev->id.revision < 10)
++ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+- v |= data;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+- for (i = 0; i < 10; i++) {
++ for (i = 0; i < max_retries; i++) {
+ v = pcicore_read32(pc, mdio_control);
+- if (v & 0x100 /* Trans complete */)
++ if (v & 0x100 /* Trans complete */) {
++ udelay(10);
++ ret = pcicore_read32(pc, mdio_data);
+ break;
++ }
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
++ return ret;
+ }
+
+-static void ssb_broadcast_value(struct ssb_device *dev,
+- u32 address, u32 data)
++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
++ u8 address, u16 data)
+ {
+- /* This is used for both, PCI and ChipCommon core, so be careful. */
+- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ int max_retries = 10;
++ u32 v;
++ int i;
+
+- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
+- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
+- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
+- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
+-}
++ v = 0x80; /* Enable Preamble Sequence */
++ v |= 0x2; /* MDIO Clock Divisor */
++ pcicore_write32(pc, mdio_control, v);
+
+-static void ssb_commit_settings(struct ssb_bus *bus)
+-{
+- struct ssb_device *dev;
++ if (pc->dev->id.revision >= 10) {
++ max_retries = 200;
++ ssb_pcie_mdio_set_phy(pc, device);
++ }
+
+- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+- if (WARN_ON(!dev))
+- return;
+- /* This forces an update of the cached registers. */
+- ssb_broadcast_value(dev, 0xFD8, 0);
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 17); /* Turnaround */
++ if (pc->dev->id.revision < 10)
++ v |= (u32)device << 22;
++ v |= (u32)address << 18;
++ v |= data;
++ pcicore_write32(pc, mdio_data, v);
++ /* Wait for the device to complete the transaction */
++ udelay(10);
++ for (i = 0; i < max_retries; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */)
++ break;
++ msleep(1);
++ }
++ pcicore_write32(pc, mdio_control, 0);
+ }
+
+ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+@@ -550,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc
+ if (pc->setup_done)
+ goto out;
+ if (pdev->id.coreid == SSB_DEV_PCI) {
+- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+- tmp |= SSB_PCICORE_SBTOPCI_PREF;
+- tmp |= SSB_PCICORE_SBTOPCI_BURST;
+- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+-
+- if (pdev->id.revision < 5) {
+- tmp = ssb_read32(pdev, SSB_IMCFGLO);
+- tmp &= ~SSB_IMCFGLO_SERTO;
+- tmp |= 2;
+- tmp &= ~SSB_IMCFGLO_REQTO;
+- tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
+- ssb_write32(pdev, SSB_IMCFGLO, tmp);
+- ssb_commit_settings(bus);
+- } else if (pdev->id.revision >= 11) {
+- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+- tmp |= SSB_PCICORE_SBTOPCI_MRM;
+- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+- }
++ ssb_pcicore_pci_setup_workarounds(pc);
+ } else {
+ WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
+- //TODO: Better make defines for all these magic PCIE values.
+- if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
+- /* TLP Workaround register. */
+- tmp = ssb_pcie_read(pc, 0x4);
+- tmp |= 0x8;
+- ssb_pcie_write(pc, 0x4, tmp);
+- }
+- if (pdev->id.revision == 0) {
+- const u8 serdes_rx_device = 0x1F;
+-
+- ssb_pcie_mdio_write(pc, serdes_rx_device,
+- 2 /* Timer */, 0x8128);
+- ssb_pcie_mdio_write(pc, serdes_rx_device,
+- 6 /* CDR */, 0x0100);
+- ssb_pcie_mdio_write(pc, serdes_rx_device,
+- 7 /* CDR BW */, 0x1466);
+- } else if (pdev->id.revision == 1) {
+- /* DLLP Link Control register. */
+- tmp = ssb_pcie_read(pc, 0x100);
+- tmp |= 0x40;
+- ssb_pcie_write(pc, 0x100, tmp);
+- }
++ ssb_pcicore_pcie_setup_workarounds(pc);
+ }
+ pc->setup_done = 1;
+ out:
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -557,7 +557,7 @@ error:
+ }
+
+ /* Needs ssb_buses_lock() */
+-static int ssb_attach_queued_buses(void)
++static int __devinit ssb_attach_queued_buses(void)
+ {
+ struct ssb_bus *bus, *n;
+ int err = 0;
+@@ -768,9 +768,9 @@ out:
+ return err;
+ }
+
+-static int ssb_bus_register(struct ssb_bus *bus,
+- ssb_invariants_func_t get_invariants,
+- unsigned long baseaddr)
++static int __devinit ssb_bus_register(struct ssb_bus *bus,
++ ssb_invariants_func_t get_invariants,
++ unsigned long baseaddr)
+ {
+ int err;
+
+@@ -851,8 +851,8 @@ err_disable_xtal:
+ }
+
+ #ifdef CONFIG_SSB_PCIHOST
+-int ssb_bus_pcibus_register(struct ssb_bus *bus,
+- struct pci_dev *host_pci)
++int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
++ struct pci_dev *host_pci)
+ {
+ int err;
+
+@@ -875,9 +875,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
+ #endif /* CONFIG_SSB_PCIHOST */
+
+ #ifdef CONFIG_SSB_PCMCIAHOST
+-int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+- struct pcmcia_device *pcmcia_dev,
+- unsigned long baseaddr)
++int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
++ struct pcmcia_device *pcmcia_dev,
++ unsigned long baseaddr)
+ {
+ int err;
+
+@@ -897,8 +897,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
+ #endif /* CONFIG_SSB_PCMCIAHOST */
+
+ #ifdef CONFIG_SSB_SDIOHOST
+-int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
+- unsigned int quirks)
++int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
++ struct sdio_func *func,
++ unsigned int quirks)
+ {
+ int err;
+
+@@ -918,9 +919,9 @@ int ssb_bus_sdiobus_register(struct ssb_
+ EXPORT_SYMBOL(ssb_bus_sdiobus_register);
+ #endif /* CONFIG_SSB_PCMCIAHOST */
+
+-int ssb_bus_ssbbus_register(struct ssb_bus *bus,
+- unsigned long baseaddr,
+- ssb_invariants_func_t get_invariants)
++int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
++ unsigned long baseaddr,
++ ssb_invariants_func_t get_invariants)
+ {
+ int err;
+
+@@ -1117,23 +1118,22 @@ static u32 ssb_tmslow_reject_bitmask(str
+ {
+ u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
+
+- /* The REJECT bit changed position in TMSLOW between
+- * Backplane revisions. */
++ /* The REJECT bit seems to be different for Backplane rev 2.3 */
+ switch (rev) {
+ case SSB_IDLOW_SSBREV_22:
+- return SSB_TMSLOW_REJECT_22;
++ case SSB_IDLOW_SSBREV_24:
++ case SSB_IDLOW_SSBREV_26:
++ return SSB_TMSLOW_REJECT;
+ case SSB_IDLOW_SSBREV_23:
+ return SSB_TMSLOW_REJECT_23;
+- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
+- case SSB_IDLOW_SSBREV_25: /* same here */
+- case SSB_IDLOW_SSBREV_26: /* same here */
++ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
+ case SSB_IDLOW_SSBREV_27: /* same here */
+- return SSB_TMSLOW_REJECT_23; /* this is a guess */
++ return SSB_TMSLOW_REJECT; /* this is a guess */
+ default:
+ printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
+ WARN_ON(1);
+ }
+- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
++ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
+ }
+
+ int ssb_device_is_enabled(struct ssb_device *dev)
+@@ -1309,20 +1309,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+
+ int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
+ {
+- struct ssb_chipcommon *cc;
+ int err;
+ enum ssb_clkmode mode;
+
+ err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+ if (err)
+ goto error;
+- cc = &bus->chipco;
+- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
+- ssb_chipco_set_clockmode(cc, mode);
+
+ #ifdef CONFIG_SSB_DEBUG
+ bus->powered_up = 1;
+ #endif
++
++ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
++ ssb_chipco_set_clockmode(&bus->chipco, mode);
++
+ return 0;
+ error:
+ ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
+@@ -1330,6 +1330,37 @@ error:
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+
++static void ssb_broadcast_value(struct ssb_device *dev,
++ u32 address, u32 data)
++{
++#ifdef CONFIG_SSB_DRIVER_PCICORE
++ /* This is used for both, PCI and ChipCommon core, so be careful. */
++ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
++ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
++#endif
++
++ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
++ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
++ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
++ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
++}
++
++void ssb_commit_settings(struct ssb_bus *bus)
++{
++ struct ssb_device *dev;
++
++#ifdef CONFIG_SSB_DRIVER_PCICORE
++ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
++#else
++ dev = bus->chipco.dev;
++#endif
++ if (WARN_ON(!dev))
++ return;
++ /* This forces an update of the cached registers. */
++ ssb_broadcast_value(dev, 0xFD8, 0);
++}
++EXPORT_SYMBOL(ssb_commit_settings);
++
+ u32 ssb_admatch_base(u32 adm)
+ {
+ u32 base = 0;
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus
+ static int ssb_pci_sprom_get(struct ssb_bus *bus,
+ struct ssb_sprom *sprom)
+ {
+- const struct ssb_sprom *fallback;
+ int err;
+ u16 *buf;
+
+@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_
+ if (err) {
+ /* All CRC attempts failed.
+ * Maybe there is no SPROM on the device?
+- * If we have a fallback, use that. */
+- fallback = ssb_get_fallback_sprom();
+- if (fallback) {
+- memcpy(sprom, fallback, sizeof(*sprom));
++ * Now we ask the arch code if there is some sprom
++ * available for this device in some other storage */
++ err = ssb_fill_sprom_with_fallback(bus, sprom);
++ if (err) {
++ ssb_printk(KERN_WARNING PFX "WARNING: Using"
++ " fallback SPROM failed (err %d)\n",
++ err);
++ } else {
++ ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
++ " revision %d provided by"
++ " platform.\n", sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci
+ # define ssb_pcihost_resume NULL
+ #endif /* CONFIG_PM */
+
+-static int ssb_pcihost_probe(struct pci_dev *dev,
+- const struct pci_device_id *id)
++static int __devinit ssb_pcihost_probe(struct pci_dev *dev,
++ const struct pci_device_id *id)
+ {
+ struct ssb_bus *ssb;
+ int err = -ENOMEM;
+@@ -110,7 +110,7 @@ static void ssb_pcihost_remove(struct pc
+ pci_set_drvdata(dev, NULL);
+ }
+
+-int ssb_pcihost_register(struct pci_driver *driver)
++int __devinit ssb_pcihost_register(struct pci_driver *driver)
+ {
+ driver->probe = ssb_pcihost_probe;
+ driver->remove = ssb_pcihost_remove;
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -258,7 +258,10 @@ static int we_support_multiple_80211_cor
+ #ifdef CONFIG_SSB_PCIHOST
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+- bus->host_pci->device == 0x4324)
++ ((bus->host_pci->device == 0x4313) ||
++ (bus->host_pci->device == 0x431A) ||
++ (bus->host_pci->device == 0x4321) ||
++ (bus->host_pci->device == 0x4324)))
+ return 1;
+ }
+ #endif /* CONFIG_SSB_PCIHOST */
+@@ -307,7 +310,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ } else {
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ bus->chip_id = pcidev_to_chipid(bus->host_pci);
+- pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
++ pci_read_config_byte(bus->host_pci, PCI_REVISION_ID,
+ &bus->chip_rev);
+ bus->chip_package = 0;
+ } else {
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -17,7 +17,7 @@
+ #include <linux/slab.h>
+
+
+-static const struct ssb_sprom *fallback_sprom;
++static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
+
+
+ static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
+@@ -145,36 +145,43 @@ out:
+ }
+
+ /**
+- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
++ * ssb_arch_register_fallback_sprom - Registers a method providing a
++ * fallback SPROM if no SPROM is found.
+ *
+- * @sprom: The SPROM data structure to register.
++ * @sprom_callback: The callback function.
+ *
+- * With this function the architecture implementation may register a fallback
+- * SPROM data structure. The fallback is only used for PCI based SSB devices,
+- * where no valid SPROM can be found in the shadow registers.
++ * With this function the architecture implementation may register a
++ * callback handler which fills the SPROM data structure. The fallback is
++ * only used for PCI based SSB devices, where no valid SPROM can be found
++ * in the shadow registers.
+ *
+- * This function is useful for weird architectures that have a half-assed SSB device
+- * hardwired to their PCI bus.
++ * This function is useful for weird architectures that have a half-assed
++ * SSB device hardwired to their PCI bus.
+ *
+- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
+- * don't use this fallback.
+- * Architectures must provide the SPROM for native SSB devices anyway,
+- * so the fallback also isn't used for native devices.
++ * Note that it does only work with PCI attached SSB devices. PCMCIA
++ * devices currently don't use this fallback.
++ * Architectures must provide the SPROM for native SSB devices anyway, so
++ * the fallback also isn't used for native devices.
+ *
+- * This function is available for architecture code, only. So it is not exported.
++ * This function is available for architecture code, only. So it is not
++ * exported.
+ */
+-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
++int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
++ struct ssb_sprom *out))
+ {
+- if (fallback_sprom)
++ if (get_fallback_sprom)
+ return -EEXIST;
+- fallback_sprom = sprom;
++ get_fallback_sprom = sprom_callback;
+
+ return 0;
+ }
+
+-const struct ssb_sprom *ssb_get_fallback_sprom(void)
++int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+- return fallback_sprom;
++ if (!get_fallback_sprom)
++ return -ENOENT;
++
++ return get_fallback_sprom(bus, out);
+ }
+
+ /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ const char *buf, size_t count,
+ int (*sprom_check_crc)(const u16 *sprom, size_t size),
+ int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
+-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
++extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
++ struct ssb_sprom *out);
+
+
+ /* core.c */
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -308,7 +308,7 @@ struct ssb_bus {
+
+ /* ID information about the Chip. */
+ u16 chip_id;
+- u16 chip_rev;
++ u8 chip_rev;
+ u16 sprom_offset;
+ u16 sprom_size; /* number of words in sprom */
+ u8 chip_package;
+@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struc
+
+ /* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
++extern int ssb_arch_register_fallback_sprom(
++ int (*sprom_callback)(struct ssb_bus *bus,
++ struct ssb_sprom *out));
+
+ /* Suspend a SSB bus.
+ * Call this from the parent bus suspend routine. */
+@@ -518,6 +520,7 @@ extern int ssb_bus_may_powerdown(struct
+ * Otherwise static always-on powercontrol will be used. */
+ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+
++extern void ssb_commit_settings(struct ssb_bus *bus);
+
+ /* Various helper functions */
+ extern u32 ssb_admatch_base(u32 adm);
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -123,6 +123,8 @@
+ #define SSB_CHIPCO_FLASHDATA 0x0048
+ #define SSB_CHIPCO_BCAST_ADDR 0x0050
+ #define SSB_CHIPCO_BCAST_DATA 0x0054
++#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
++#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
+ #define SSB_CHIPCO_GPIOIN 0x0060
+ #define SSB_CHIPCO_GPIOOUT 0x0064
+ #define SSB_CHIPCO_GPIOOUTEN 0x0068
+@@ -131,6 +133,9 @@
+ #define SSB_CHIPCO_GPIOIRQ 0x0074
+ #define SSB_CHIPCO_WATCHDOG 0x0080
+ #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
++#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF
++#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0
++#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000
+ #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
+ #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
+ #define SSB_CHIPCO_CLOCK_N 0x0090
+@@ -189,8 +194,10 @@
+ #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
+ #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+ #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
+-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
++#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
++#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */
++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
+ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
+ #define SSB_CHIPCO_UART0_DATA 0x0300
+ #define SSB_CHIPCO_UART0_IMR 0x0304
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -97,7 +97,7 @@
+ #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
+ #define SSB_TMSLOW 0x0F98 /* SB Target State Low */
+ #define SSB_TMSLOW_RESET 0x00000001 /* Reset */
+-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
++#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */
+ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
+ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
+ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
diff --git a/target/linux/generic/patches-2.6.39/021-ssb_commit_settings_export.patch b/target/linux/generic/patches-2.6.39/021-ssb_commit_settings_export.patch
deleted file mode 100644
index 657fdd6b92..0000000000
--- a/target/linux/generic/patches-2.6.39/021-ssb_commit_settings_export.patch
+++ /dev/null
@@ -1,77 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -476,30 +476,6 @@ static void ssb_pcie_mdio_write(struct s
- pcicore_write32(pc, mdio_control, 0);
- }
-
--static void ssb_broadcast_value(struct ssb_device *dev,
-- u32 address, u32 data)
--{
-- /* This is used for both, PCI and ChipCommon core, so be careful. */
-- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
-- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
--
-- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
-- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
-- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
-- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
--}
--
--static void ssb_commit_settings(struct ssb_bus *bus)
--{
-- struct ssb_device *dev;
--
-- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
-- if (WARN_ON(!dev))
-- return;
-- /* This forces an update of the cached registers. */
-- ssb_broadcast_value(dev, 0xFD8, 0);
--}
--
- int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
- struct ssb_device *dev)
- {
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1330,6 +1330,31 @@ error:
- }
- EXPORT_SYMBOL(ssb_bus_powerup);
-
-+static void ssb_broadcast_value(struct ssb_device *dev,
-+ u32 address, u32 data)
-+{
-+ /* This is used for both, PCI and ChipCommon core, so be careful. */
-+ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
-+ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
-+
-+ ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
-+ ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
-+ ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
-+ ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
-+}
-+
-+void ssb_commit_settings(struct ssb_bus *bus)
-+{
-+ struct ssb_device *dev;
-+
-+ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
-+ if (WARN_ON(!dev))
-+ return;
-+ /* This forces an update of the cached registers. */
-+ ssb_broadcast_value(dev, 0xFD8, 0);
-+}
-+EXPORT_SYMBOL(ssb_commit_settings);
-+
- u32 ssb_admatch_base(u32 adm)
- {
- u32 base = 0;
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -518,6 +518,7 @@ extern int ssb_bus_may_powerdown(struct
- * Otherwise static always-on powercontrol will be used. */
- extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
-
-+extern void ssb_commit_settings(struct ssb_bus *bus);
-
- /* Various helper functions */
- extern u32 ssb_admatch_base(u32 adm);
diff --git a/target/linux/generic/patches-2.6.39/022-ssb_pcicore_build_breakage.patch b/target/linux/generic/patches-2.6.39/022-ssb_pcicore_build_breakage.patch
deleted file mode 100644
index 71ecc96acd..0000000000
--- a/target/linux/generic/patches-2.6.39/022-ssb_pcicore_build_breakage.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 1159024d4c0aafecaa0c6635c55153b4b39cc1c8 Mon Sep 17 00:00:00 2001
-From: "John W. Linville" <linville@tuxdriver.com>
-Date: Fri, 13 May 2011 09:23:47 -0400
-Subject: [PATCH] ssb: fix pcicore build breakage
-
-drivers/ssb/main.c:1336: error: 'SSB_PCICORE_BCAST_ADDR' undeclared (first use in this function)
-drivers/ssb/main.c:1337: error: 'SSB_PCICORE_BCAST_DATA' undeclared (first use in this function)
-drivers/ssb/main.c:1349: error: 'struct ssb_pcicore' has no member named 'dev'
-
-Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
----
- drivers/ssb/main.c | 14 ++++++++++----
- 1 files changed, 10 insertions(+), 4 deletions(-)
-
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1333,21 +1333,27 @@ EXPORT_SYMBOL(ssb_bus_powerup);
- static void ssb_broadcast_value(struct ssb_device *dev,
- u32 address, u32 data)
- {
-+#ifdef CONFIG_SSB_DRIVER_PCICORE
- /* This is used for both, PCI and ChipCommon core, so be careful. */
- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
-+#endif
-
-- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
-- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
-- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
-- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
-+ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
-+ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
-+ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
-+ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
- }
-
- void ssb_commit_settings(struct ssb_bus *bus)
- {
- struct ssb_device *dev;
-
-+#ifdef CONFIG_SSB_DRIVER_PCICORE
- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
-+#else
-+ dev = bus->chipco.dev;
-+#endif
- if (WARN_ON(!dev))
- return;
- /* This forces an update of the cached registers. */
diff --git a/target/linux/generic/patches-2.6.39/025-bcma_backport.patch b/target/linux/generic/patches-2.6.39/025-bcma_backport.patch
new file mode 100644
index 0000000000..333a3b57b0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.39/025-bcma_backport.patch
@@ -0,0 +1,2514 @@
+--- /dev/null
++++ b/Documentation/ABI/testing/sysfs-bus-bcma
+@@ -0,0 +1,31 @@
++What: /sys/bus/bcma/devices/.../manuf
++Date: May 2011
++KernelVersion: 2.6.40
++Contact: Rafał Miłecki <zajec5@gmail.com>
++Description:
++ Each BCMA core has it's manufacturer id. See
++ include/linux/bcma/bcma.h for possible values.
++
++What: /sys/bus/bcma/devices/.../id
++Date: May 2011
++KernelVersion: 2.6.40
++Contact: Rafał Miłecki <zajec5@gmail.com>
++Description:
++ There are a few types of BCMA cores, they can be identified by
++ id field.
++
++What: /sys/bus/bcma/devices/.../rev
++Date: May 2011
++KernelVersion: 2.6.40
++Contact: Rafał Miłecki <zajec5@gmail.com>
++Description:
++ BCMA cores of the same type can still slightly differ depending
++ on their revision. Use it for detailed programming.
++
++What: /sys/bus/bcma/devices/.../class
++Date: May 2011
++KernelVersion: 2.6.40
++Contact: Rafał Miłecki <zajec5@gmail.com>
++Description:
++ Each BCMA core is identified by few fields, including class it
++ belongs to. See include/linux/bcma/bcma.h for possible values.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -5832,6 +5832,13 @@ S: Maintained
+ F: drivers/ssb/
+ F: include/linux/ssb/
+
++BROADCOM SPECIFIC AMBA DRIVER (BCMA)
++M: Rafał Miłecki <zajec5@gmail.com>
++L: linux-wireless@vger.kernel.org
++S: Maintained
++F: drivers/bcma/
++F: include/linux/bcma/
++
+ SONY VAIO CONTROL DEVICE DRIVER
+ M: Mattia Dongili <malattia@linux.it>
+ L: platform-driver-x86@vger.kernel.org
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -68,6 +68,8 @@ source "drivers/watchdog/Kconfig"
+
+ source "drivers/ssb/Kconfig"
+
++source "drivers/bcma/Kconfig"
++
+ source "drivers/mfd/Kconfig"
+
+ source "drivers/regulator/Kconfig"
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -110,6 +110,7 @@ obj-$(CONFIG_HID) += hid/
+ obj-$(CONFIG_PPC_PS3) += ps3/
+ obj-$(CONFIG_OF) += of/
+ obj-$(CONFIG_SSB) += ssb/
++obj-$(CONFIG_BCMA) += bcma/
+ obj-$(CONFIG_VHOST_NET) += vhost/
+ obj-$(CONFIG_VLYNQ) += vlynq/
+ obj-$(CONFIG_STAGING) += staging/
+--- /dev/null
++++ b/drivers/bcma/Kconfig
+@@ -0,0 +1,38 @@
++config BCMA_POSSIBLE
++ bool
++ depends on HAS_IOMEM && HAS_DMA
++ default y
++
++menu "Broadcom specific AMBA"
++ depends on BCMA_POSSIBLE
++
++config BCMA
++ tristate "BCMA support"
++ depends on BCMA_POSSIBLE
++ help
++ Bus driver for Broadcom specific Advanced Microcontroller Bus
++ Architecture.
++
++# Support for Block-I/O. SELECT this from the driver that needs it.
++config BCMA_BLOCKIO
++ bool
++ depends on BCMA
++
++config BCMA_HOST_PCI_POSSIBLE
++ bool
++ depends on BCMA && PCI = y
++ default y
++
++config BCMA_HOST_PCI
++ bool "Support for BCMA on PCI-host bus"
++ depends on BCMA_HOST_PCI_POSSIBLE
++
++config BCMA_DEBUG
++ bool "BCMA debugging"
++ depends on BCMA
++ help
++ This turns on additional debugging messages.
++
++ If unsure, say N
++
++endmenu
+--- /dev/null
++++ b/drivers/bcma/Makefile
+@@ -0,0 +1,7 @@
++bcma-y += main.o scan.o core.o sprom.o
++bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
++bcma-y += driver_pci.o
++bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
++obj-$(CONFIG_BCMA) += bcma.o
++
++ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG
+--- /dev/null
++++ b/drivers/bcma/README
+@@ -0,0 +1,19 @@
++Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
++however from programming point of view there is nothing AMBA specific we use.
++
++Standard AMBA drivers are platform specific, have hardcoded addresses and use
++AMBA standard fields like CID and PID.
++
++In case of Broadcom's cards every device consists of:
++1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
++ as standard AMBA device. Reading it's CID or PID can cause machine lockup.
++2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
++ and PIDs (0x103BB369), but we do not use that info for anything. One of that
++ devices is used for managing Broadcom specific core.
++
++Addresses of AMBA devices are not hardcoded in driver and have to be read from
++EPROM.
++
++In this situation we decided to introduce separated bus. It can contain up to
++16 devices identified by Broadcom specific fields: manufacturer, id, revision
++and class.
+--- /dev/null
++++ b/drivers/bcma/TODO
+@@ -0,0 +1,3 @@
++- Interrupts
++- Defines for PCI core driver
++- Create kernel Documentation (use info from README)
+--- /dev/null
++++ b/drivers/bcma/bcma_private.h
+@@ -0,0 +1,31 @@
++#ifndef LINUX_BCMA_PRIVATE_H_
++#define LINUX_BCMA_PRIVATE_H_
++
++#ifndef pr_fmt
++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
++#endif
++
++#include <linux/bcma/bcma.h>
++#include <linux/delay.h>
++
++#define BCMA_CORE_SIZE 0x1000
++
++struct bcma_bus;
++
++/* main.c */
++int bcma_bus_register(struct bcma_bus *bus);
++void bcma_bus_unregister(struct bcma_bus *bus);
++
++/* scan.c */
++int bcma_bus_scan(struct bcma_bus *bus);
++
++/* sprom.c */
++int bcma_sprom_get(struct bcma_bus *bus);
++
++#ifdef CONFIG_BCMA_HOST_PCI
++/* host_pci.c */
++extern int __init bcma_host_pci_init(void);
++extern void __exit bcma_host_pci_exit(void);
++#endif /* CONFIG_BCMA_HOST_PCI */
++
++#endif
+--- /dev/null
++++ b/drivers/bcma/core.c
+@@ -0,0 +1,52 @@
++/*
++ * Broadcom specific AMBA
++ * Core ops
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++bool bcma_core_is_enabled(struct bcma_device *core)
++{
++ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
++ != BCMA_IOCTL_CLK)
++ return false;
++ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
++ return false;
++ return true;
++}
++EXPORT_SYMBOL_GPL(bcma_core_is_enabled);
++
++void bcma_core_disable(struct bcma_device *core, u32 flags)
++{
++ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
++ return;
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
++
++ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
++ udelay(1);
++}
++EXPORT_SYMBOL_GPL(bcma_core_disable);
++
++int bcma_core_enable(struct bcma_device *core, u32 flags)
++{
++ bcma_core_disable(core, flags);
++
++ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags));
++ bcma_aread32(core, BCMA_IOCTL);
++
++ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(1);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(bcma_core_enable);
+--- /dev/null
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -0,0 +1,89 @@
++/*
++ * Broadcom specific AMBA
++ * ChipCommon core driver
++ *
++ * Copyright 2005, Broadcom Corporation
++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
++ u32 mask, u32 value)
++{
++ value &= mask;
++ value |= bcma_cc_read32(cc, offset) & ~mask;
++ bcma_cc_write32(cc, offset, value);
++
++ return value;
++}
++
++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++{
++ if (cc->core->id.rev >= 11)
++ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
++ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
++ if (cc->core->id.rev >= 35)
++ cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
++
++ if (cc->core->id.rev >= 20) {
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ }
++
++ if (cc->capabilities & BCMA_CC_CAP_PMU)
++ bcma_pmu_init(cc);
++ if (cc->capabilities & BCMA_CC_CAP_PCTL)
++ pr_err("Power control not implemented!\n");
++}
++
++/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
++void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
++{
++ /* instant NMI */
++ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
++}
++
++void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value);
++}
++
++u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask)
++{
++ return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask;
++}
++
++u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
++{
++ return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
++}
++
++u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++}
++
++u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++}
++
++u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++}
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
++
++u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++}
++
++u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++}
+--- /dev/null
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -0,0 +1,138 @@
++/*
++ * Broadcom specific AMBA
++ * ChipCommon Power Management Unit driver
++ *
++ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007, Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
++ u32 offset, u32 mask, u32 set)
++{
++ u32 value;
++
++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
++ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
++ value &= mask;
++ value |= set;
++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
++}
++
++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case 0x4313:
++ case 0x4331:
++ case 43224:
++ case 43225:
++ break;
++ default:
++ pr_err("PLL init unknown for device 0x%04X\n",
++ bus->chipinfo.id);
++ }
++}
++
++static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 min_msk = 0, max_msk = 0;
++
++ switch (bus->chipinfo.id) {
++ case 0x4313:
++ min_msk = 0x200D;
++ max_msk = 0xFFFF;
++ break;
++ case 43224:
++ case 43225:
++ break;
++ default:
++ pr_err("PMU resource config unknown for device 0x%04X\n",
++ bus->chipinfo.id);
++ }
++
++ /* Set the resource masks. */
++ if (min_msk)
++ bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
++ if (max_msk)
++ bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
++}
++
++void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case 0x4313:
++ case 0x4331:
++ case 43224:
++ case 43225:
++ break;
++ default:
++ pr_err("PMU switch/regulators init unknown for device "
++ "0x%04X\n", bus->chipinfo.id);
++ }
++}
++
++void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case 0x4313:
++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
++ break;
++ case 0x4331:
++ pr_err("Enabling Ext PA lines not implemented\n");
++ break;
++ case 43224:
++ if (bus->chipinfo.rev == 0) {
++ pr_err("Workarounds for 43224 rev 0 not fully "
++ "implemented\n");
++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
++ } else {
++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
++ }
++ break;
++ case 43225:
++ break;
++ default:
++ pr_err("Workarounds unknown for device 0x%04X\n",
++ bus->chipinfo.id);
++ }
++}
++
++void bcma_pmu_init(struct bcma_drv_cc *cc)
++{
++ u32 pmucap;
++
++ pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
++ cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
++
++ pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
++ pmucap);
++
++ if (cc->pmu.rev == 1)
++ bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
++ ~BCMA_CC_PMU_CTL_NOILPONW);
++ else
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
++ BCMA_CC_PMU_CTL_NOILPONW);
++
++ if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
++ pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
++
++ bcma_pmu_pll_init(cc);
++ bcma_pmu_resources_init(cc);
++ bcma_pmu_swreg_init(cc);
++ bcma_pmu_workarounds(cc);
++}
+--- /dev/null
++++ b/drivers/bcma/driver_pci.c
+@@ -0,0 +1,187 @@
++/*
++ * Broadcom specific AMBA
++ * PCI Core
++ *
++ * Copyright 2005, Broadcom Corporation
++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++/**************************************************
++ * R/W ops.
++ **************************************************/
++
++static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
++{
++ pcicore_write32(pc, 0x130, address);
++ pcicore_read32(pc, 0x130);
++ return pcicore_read32(pc, 0x134);
++}
++
++#if 0
++static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
++{
++ pcicore_write32(pc, 0x130, address);
++ pcicore_read32(pc, 0x130);
++ pcicore_write32(pc, 0x134, data);
++}
++#endif
++
++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
++{
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ u32 v;
++ int i;
++
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 17); /* Turnaround */
++ v |= (0x1F << 18);
++ v |= (phy << 4);
++ pcicore_write32(pc, mdio_data, v);
++
++ udelay(10);
++ for (i = 0; i < 200; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */)
++ break;
++ msleep(1);
++ }
++}
++
++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
++{
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ int max_retries = 10;
++ u16 ret = 0;
++ u32 v;
++ int i;
++
++ v = 0x80; /* Enable Preamble Sequence */
++ v |= 0x2; /* MDIO Clock Divisor */
++ pcicore_write32(pc, mdio_control, v);
++
++ if (pc->core->id.rev >= 10) {
++ max_retries = 200;
++ bcma_pcie_mdio_set_phy(pc, device);
++ }
++
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 29); /* Read Transaction */
++ v |= (1 << 17); /* Turnaround */
++ if (pc->core->id.rev < 10)
++ v |= (u32)device << 22;
++ v |= (u32)address << 18;
++ pcicore_write32(pc, mdio_data, v);
++ /* Wait for the device to complete the transaction */
++ udelay(10);
++ for (i = 0; i < max_retries; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */) {
++ udelay(10);
++ ret = pcicore_read32(pc, mdio_data);
++ break;
++ }
++ msleep(1);
++ }
++ pcicore_write32(pc, mdio_control, 0);
++ return ret;
++}
++
++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
++ u8 address, u16 data)
++{
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ int max_retries = 10;
++ u32 v;
++ int i;
++
++ v = 0x80; /* Enable Preamble Sequence */
++ v |= 0x2; /* MDIO Clock Divisor */
++ pcicore_write32(pc, mdio_control, v);
++
++ if (pc->core->id.rev >= 10) {
++ max_retries = 200;
++ bcma_pcie_mdio_set_phy(pc, device);
++ }
++
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 17); /* Turnaround */
++ if (pc->core->id.rev < 10)
++ v |= (u32)device << 22;
++ v |= (u32)address << 18;
++ v |= data;
++ pcicore_write32(pc, mdio_data, v);
++ /* Wait for the device to complete the transaction */
++ udelay(10);
++ for (i = 0; i < max_retries; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */)
++ break;
++ msleep(1);
++ }
++ pcicore_write32(pc, mdio_control, 0);
++}
++
++/**************************************************
++ * Workarounds.
++ **************************************************/
++
++static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
++{
++ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
++}
++
++static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
++{
++ const u8 serdes_pll_device = 0x1D;
++ const u8 serdes_rx_device = 0x1F;
++ u16 tmp;
++
++ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
++ bcma_pcicore_polarity_workaround(pc));
++ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
++ if (tmp & 0x4000)
++ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
++}
++
++/**************************************************
++ * Init.
++ **************************************************/
++
++void bcma_core_pci_init(struct bcma_drv_pci *pc)
++{
++ bcma_pcicore_serdes_workaround(pc);
++}
++
++int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
++ bool enable)
++{
++ struct pci_dev *pdev = pc->core->bus->host_pci;
++ u32 coremask, tmp;
++ int err;
++
++ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
++ if (err)
++ goto out;
++
++ coremask = BIT(core->core_index) << 8;
++ if (enable)
++ tmp |= coremask;
++ else
++ tmp &= ~coremask;
++
++ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
++
++out:
++ return err;
++}
++EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
+--- /dev/null
++++ b/drivers/bcma/host_pci.c
+@@ -0,0 +1,251 @@
++/*
++ * Broadcom specific AMBA
++ * PCI Host
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/slab.h>
++#include <linux/bcma/bcma.h>
++#include <linux/pci.h>
++
++static void bcma_host_pci_switch_core(struct bcma_device *core)
++{
++ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN,
++ core->addr);
++ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
++ core->wrap);
++ core->bus->mapped_core = core;
++ pr_debug("Switched to core: 0x%X\n", core->id.id);
++}
++
++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ return ioread8(core->bus->mmio + offset);
++}
++
++static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ return ioread16(core->bus->mmio + offset);
++}
++
++static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ return ioread32(core->bus->mmio + offset);
++}
++
++static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
++ u8 value)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ iowrite8(value, core->bus->mmio + offset);
++}
++
++static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
++ u16 value)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ iowrite16(value, core->bus->mmio + offset);
++}
++
++static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
++ u32 value)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ iowrite32(value, core->bus->mmio + offset);
++}
++
++#ifdef CONFIG_BCMA_BLOCKIO
++void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ void __iomem *addr = core->bus->mmio + offset;
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ switch (reg_width) {
++ case sizeof(u8):
++ ioread8_rep(addr, buffer, count);
++ break;
++ case sizeof(u16):
++ WARN_ON(count & 1);
++ ioread16_rep(addr, buffer, count >> 1);
++ break;
++ case sizeof(u32):
++ WARN_ON(count & 3);
++ ioread32_rep(addr, buffer, count >> 2);
++ break;
++ default:
++ WARN_ON(1);
++ }
++}
++
++void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ void __iomem *addr = core->bus->mmio + offset;
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ switch (reg_width) {
++ case sizeof(u8):
++ iowrite8_rep(addr, buffer, count);
++ break;
++ case sizeof(u16):
++ WARN_ON(count & 1);
++ iowrite16_rep(addr, buffer, count >> 1);
++ break;
++ case sizeof(u32):
++ WARN_ON(count & 3);
++ iowrite32_rep(addr, buffer, count >> 2);
++ break;
++ default:
++ WARN_ON(1);
++ }
++}
++#endif
++
++static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
++}
++
++static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset,
++ u32 value)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
++}
++
++const struct bcma_host_ops bcma_host_pci_ops = {
++ .read8 = bcma_host_pci_read8,
++ .read16 = bcma_host_pci_read16,
++ .read32 = bcma_host_pci_read32,
++ .write8 = bcma_host_pci_write8,
++ .write16 = bcma_host_pci_write16,
++ .write32 = bcma_host_pci_write32,
++#ifdef CONFIG_BCMA_BLOCKIO
++ .block_read = bcma_host_pci_block_read,
++ .block_write = bcma_host_pci_block_write,
++#endif
++ .aread32 = bcma_host_pci_aread32,
++ .awrite32 = bcma_host_pci_awrite32,
++};
++
++static int bcma_host_pci_probe(struct pci_dev *dev,
++ const struct pci_device_id *id)
++{
++ struct bcma_bus *bus;
++ int err = -ENOMEM;
++ const char *name;
++ u32 val;
++
++ /* Alloc */
++ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
++ if (!bus)
++ goto out;
++
++ /* Basic PCI configuration */
++ err = pci_enable_device(dev);
++ if (err)
++ goto err_kfree_bus;
++
++ name = dev_name(&dev->dev);
++ if (dev->driver && dev->driver->name)
++ name = dev->driver->name;
++ err = pci_request_regions(dev, name);
++ if (err)
++ goto err_pci_disable;
++ pci_set_master(dev);
++
++ /* Disable the RETRY_TIMEOUT register (0x41) to keep
++ * PCI Tx retries from interfering with C3 CPU state */
++ pci_read_config_dword(dev, 0x40, &val);
++ if ((val & 0x0000ff00) != 0)
++ pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
++
++ /* SSB needed additional powering up, do we have any AMBA PCI cards? */
++ if (!pci_is_pcie(dev))
++ pr_err("PCI card detected, report problems.\n");
++
++ /* Map MMIO */
++ err = -ENOMEM;
++ bus->mmio = pci_iomap(dev, 0, ~0UL);
++ if (!bus->mmio)
++ goto err_pci_release_regions;
++
++ /* Host specific */
++ bus->host_pci = dev;
++ bus->hosttype = BCMA_HOSTTYPE_PCI;
++ bus->ops = &bcma_host_pci_ops;
++
++ /* Register */
++ err = bcma_bus_register(bus);
++ if (err)
++ goto err_pci_unmap_mmio;
++
++ pci_set_drvdata(dev, bus);
++
++out:
++ return err;
++
++err_pci_unmap_mmio:
++ pci_iounmap(dev, bus->mmio);
++err_pci_release_regions:
++ pci_release_regions(dev);
++err_pci_disable:
++ pci_disable_device(dev);
++err_kfree_bus:
++ kfree(bus);
++ return err;
++}
++
++static void bcma_host_pci_remove(struct pci_dev *dev)
++{
++ struct bcma_bus *bus = pci_get_drvdata(dev);
++
++ bcma_bus_unregister(bus);
++ pci_iounmap(dev, bus->mmio);
++ pci_release_regions(dev);
++ pci_disable_device(dev);
++ kfree(bus);
++ pci_set_drvdata(dev, NULL);
++}
++
++static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
++ { 0, },
++};
++MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
++
++static struct pci_driver bcma_pci_bridge_driver = {
++ .name = "bcma-pci-bridge",
++ .id_table = bcma_pci_bridge_tbl,
++ .probe = bcma_host_pci_probe,
++ .remove = bcma_host_pci_remove,
++};
++
++int __init bcma_host_pci_init(void)
++{
++ return pci_register_driver(&bcma_pci_bridge_driver);
++}
++
++void __exit bcma_host_pci_exit(void)
++{
++ pci_unregister_driver(&bcma_pci_bridge_driver);
++}
+--- /dev/null
++++ b/drivers/bcma/main.c
+@@ -0,0 +1,254 @@
++/*
++ * Broadcom specific AMBA
++ * Bus subsystem
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
++MODULE_LICENSE("GPL");
++
++static int bcma_bus_match(struct device *dev, struct device_driver *drv);
++static int bcma_device_probe(struct device *dev);
++static int bcma_device_remove(struct device *dev);
++
++static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ return sprintf(buf, "0x%03X\n", core->id.manuf);
++}
++static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ return sprintf(buf, "0x%03X\n", core->id.id);
++}
++static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ return sprintf(buf, "0x%02X\n", core->id.rev);
++}
++static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ return sprintf(buf, "0x%X\n", core->id.class);
++}
++static struct device_attribute bcma_device_attrs[] = {
++ __ATTR_RO(manuf),
++ __ATTR_RO(id),
++ __ATTR_RO(rev),
++ __ATTR_RO(class),
++ __ATTR_NULL,
++};
++
++static struct bus_type bcma_bus_type = {
++ .name = "bcma",
++ .match = bcma_bus_match,
++ .probe = bcma_device_probe,
++ .remove = bcma_device_remove,
++ .dev_attrs = bcma_device_attrs,
++};
++
++static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ if (core->id.id == coreid)
++ return core;
++ }
++ return NULL;
++}
++
++static void bcma_release_core_dev(struct device *dev)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ kfree(core);
++}
++
++static int bcma_register_cores(struct bcma_bus *bus)
++{
++ struct bcma_device *core;
++ int err, dev_id = 0;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ /* We support that cores ourself */
++ switch (core->id.id) {
++ case BCMA_CORE_CHIPCOMMON:
++ case BCMA_CORE_PCI:
++ case BCMA_CORE_PCIE:
++ continue;
++ }
++
++ core->dev.release = bcma_release_core_dev;
++ core->dev.bus = &bcma_bus_type;
++ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
++
++ switch (bus->hosttype) {
++ case BCMA_HOSTTYPE_PCI:
++ core->dev.parent = &bus->host_pci->dev;
++ core->dma_dev = &bus->host_pci->dev;
++ core->irq = bus->host_pci->irq;
++ break;
++ case BCMA_HOSTTYPE_NONE:
++ case BCMA_HOSTTYPE_SDIO:
++ break;
++ }
++
++ err = device_register(&core->dev);
++ if (err) {
++ pr_err("Could not register dev for core 0x%03X\n",
++ core->id.id);
++ continue;
++ }
++ core->dev_registered = true;
++ dev_id++;
++ }
++
++ return 0;
++}
++
++static void bcma_unregister_cores(struct bcma_bus *bus)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ if (core->dev_registered)
++ device_unregister(&core->dev);
++ }
++}
++
++int bcma_bus_register(struct bcma_bus *bus)
++{
++ int err;
++ struct bcma_device *core;
++
++ /* Scan for devices (cores) */
++ err = bcma_bus_scan(bus);
++ if (err) {
++ pr_err("Failed to scan: %d\n", err);
++ return -1;
++ }
++
++ /* Init CC core */
++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ if (core) {
++ bus->drv_cc.core = core;
++ bcma_core_chipcommon_init(&bus->drv_cc);
++ }
++
++ /* Init PCIE core */
++ core = bcma_find_core(bus, BCMA_CORE_PCIE);
++ if (core) {
++ bus->drv_pci.core = core;
++ bcma_core_pci_init(&bus->drv_pci);
++ }
++
++ /* Try to get SPROM */
++ err = bcma_sprom_get(bus);
++ if (err) {
++ pr_err("Failed to get SPROM: %d\n", err);
++ return -ENOENT;
++ }
++
++ /* Register found cores */
++ bcma_register_cores(bus);
++
++ pr_info("Bus registered\n");
++
++ return 0;
++}
++
++void bcma_bus_unregister(struct bcma_bus *bus)
++{
++ bcma_unregister_cores(bus);
++}
++
++int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
++{
++ drv->drv.name = drv->name;
++ drv->drv.bus = &bcma_bus_type;
++ drv->drv.owner = owner;
++
++ return driver_register(&drv->drv);
++}
++EXPORT_SYMBOL_GPL(__bcma_driver_register);
++
++void bcma_driver_unregister(struct bcma_driver *drv)
++{
++ driver_unregister(&drv->drv);
++}
++EXPORT_SYMBOL_GPL(bcma_driver_unregister);
++
++static int bcma_bus_match(struct device *dev, struct device_driver *drv)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
++ const struct bcma_device_id *cid = &core->id;
++ const struct bcma_device_id *did;
++
++ for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) {
++ if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) &&
++ (did->id == cid->id || did->id == BCMA_ANY_ID) &&
++ (did->rev == cid->rev || did->rev == BCMA_ANY_REV) &&
++ (did->class == cid->class || did->class == BCMA_ANY_CLASS))
++ return 1;
++ }
++ return 0;
++}
++
++static int bcma_device_probe(struct device *dev)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
++ drv);
++ int err = 0;
++
++ if (adrv->probe)
++ err = adrv->probe(core);
++
++ return err;
++}
++
++static int bcma_device_remove(struct device *dev)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
++ drv);
++
++ if (adrv->remove)
++ adrv->remove(core);
++
++ return 0;
++}
++
++static int __init bcma_modinit(void)
++{
++ int err;
++
++ err = bus_register(&bcma_bus_type);
++ if (err)
++ return err;
++
++#ifdef CONFIG_BCMA_HOST_PCI
++ err = bcma_host_pci_init();
++ if (err) {
++ pr_err("PCI host initialization failed\n");
++ err = 0;
++ }
++#endif
++
++ return err;
++}
++fs_initcall(bcma_modinit);
++
++static void __exit bcma_modexit(void)
++{
++#ifdef CONFIG_BCMA_HOST_PCI
++ bcma_host_pci_exit();
++#endif
++ bus_unregister(&bcma_bus_type);
++}
++module_exit(bcma_modexit)
+--- /dev/null
++++ b/drivers/bcma/scan.c
+@@ -0,0 +1,360 @@
++/*
++ * Broadcom specific AMBA
++ * Bus scanning
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "scan.h"
++#include "bcma_private.h"
++
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_regs.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <linux/slab.h>
++
++struct bcma_device_id_name {
++ u16 id;
++ const char *name;
++};
++struct bcma_device_id_name bcma_device_names[] = {
++ { BCMA_CORE_OOB_ROUTER, "OOB Router" },
++ { BCMA_CORE_INVALID, "Invalid" },
++ { BCMA_CORE_CHIPCOMMON, "ChipCommon" },
++ { BCMA_CORE_ILINE20, "ILine 20" },
++ { BCMA_CORE_SRAM, "SRAM" },
++ { BCMA_CORE_SDRAM, "SDRAM" },
++ { BCMA_CORE_PCI, "PCI" },
++ { BCMA_CORE_MIPS, "MIPS" },
++ { BCMA_CORE_ETHERNET, "Fast Ethernet" },
++ { BCMA_CORE_V90, "V90" },
++ { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
++ { BCMA_CORE_ADSL, "ADSL" },
++ { BCMA_CORE_ILINE100, "ILine 100" },
++ { BCMA_CORE_IPSEC, "IPSEC" },
++ { BCMA_CORE_UTOPIA, "UTOPIA" },
++ { BCMA_CORE_PCMCIA, "PCMCIA" },
++ { BCMA_CORE_INTERNAL_MEM, "Internal Memory" },
++ { BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" },
++ { BCMA_CORE_OFDM, "OFDM" },
++ { BCMA_CORE_EXTIF, "EXTIF" },
++ { BCMA_CORE_80211, "IEEE 802.11" },
++ { BCMA_CORE_PHY_A, "PHY A" },
++ { BCMA_CORE_PHY_B, "PHY B" },
++ { BCMA_CORE_PHY_G, "PHY G" },
++ { BCMA_CORE_MIPS_3302, "MIPS 3302" },
++ { BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
++ { BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
++ { BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
++ { BCMA_CORE_USB20_DEV, "USB 2.0 Device" },
++ { BCMA_CORE_SDIO_HOST, "SDIO Host" },
++ { BCMA_CORE_ROBOSWITCH, "Roboswitch" },
++ { BCMA_CORE_PARA_ATA, "PATA" },
++ { BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" },
++ { BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" },
++ { BCMA_CORE_PCIE, "PCIe" },
++ { BCMA_CORE_PHY_N, "PHY N" },
++ { BCMA_CORE_SRAM_CTL, "SRAM Controller" },
++ { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
++ { BCMA_CORE_ARM_1176, "ARM 1176" },
++ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
++ { BCMA_CORE_PHY_LP, "PHY LP" },
++ { BCMA_CORE_PMU, "PMU" },
++ { BCMA_CORE_PHY_SSN, "PHY SSN" },
++ { BCMA_CORE_SDIO_DEV, "SDIO Device" },
++ { BCMA_CORE_ARM_CM3, "ARM CM3" },
++ { BCMA_CORE_PHY_HT, "PHY HT" },
++ { BCMA_CORE_MIPS_74K, "MIPS 74K" },
++ { BCMA_CORE_MAC_GBIT, "GBit MAC" },
++ { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
++ { BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
++ { BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" },
++ { BCMA_CORE_SHARED_COMMON, "Common Shared" },
++ { BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" },
++ { BCMA_CORE_SPI_HOST, "SPI Host" },
++ { BCMA_CORE_I2S, "I2S" },
++ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
++ { BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_DEFAULT, "Default" },
++};
++const char *bcma_device_name(struct bcma_device_id *id)
++{
++ int i;
++
++ if (id->manuf == BCMA_MANUF_BCM) {
++ for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
++ if (bcma_device_names[i].id == id->id)
++ return bcma_device_names[i].name;
++ }
++ }
++ return "UNKNOWN";
++}
++
++static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx,
++ u16 offset)
++{
++ return readl(bus->mmio + offset);
++}
++
++static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
++{
++ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
++ pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN,
++ addr);
++}
++
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = readl(*eromptr);
++ (*eromptr)++;
++ return ent;
++}
++
++static void bcma_erom_push_ent(u32 **eromptr)
++{
++ (*eromptr)--;
++}
++
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ if (!(ent & SCAN_ER_VALID))
++ return -ENOENT;
++ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI)
++ return -ENOENT;
++ return ent;
++}
++
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ bcma_erom_push_ent(eromptr);
++ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
++}
++
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ bcma_erom_push_ent(eromptr);
++ return (((ent & SCAN_ER_VALID)) &&
++ ((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) &&
++ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
++}
++
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent;
++ while (1) {
++ ent = bcma_erom_get_ent(bus, eromptr);
++ if ((ent & SCAN_ER_VALID) &&
++ ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI))
++ break;
++ if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID))
++ break;
++ }
++ bcma_erom_push_ent(eromptr);
++}
++
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ if (!(ent & SCAN_ER_VALID))
++ return -ENOENT;
++ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP)
++ return -ENOENT;
++ return ent;
++}
++
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++ u32 type, u8 port)
++{
++ u32 addrl, addrh, sizel, sizeh = 0;
++ u32 size;
++
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ if ((!(ent & SCAN_ER_VALID)) ||
++ ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) ||
++ ((ent & SCAN_ADDR_TYPE) != type) ||
++ (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
++ bcma_erom_push_ent(eromptr);
++ return -EINVAL;
++ }
++
++ addrl = ent & SCAN_ADDR_ADDR;
++ if (ent & SCAN_ADDR_AG32)
++ addrh = bcma_erom_get_ent(bus, eromptr);
++ else
++ addrh = 0;
++
++ if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) {
++ size = bcma_erom_get_ent(bus, eromptr);
++ sizel = size & SCAN_SIZE_SZ;
++ if (size & SCAN_SIZE_SG32)
++ sizeh = bcma_erom_get_ent(bus, eromptr);
++ } else
++ sizel = SCAN_ADDR_SZ_BASE <<
++ ((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT);
++
++ return addrl;
++}
++
++int bcma_bus_scan(struct bcma_bus *bus)
++{
++ u32 erombase;
++ u32 __iomem *eromptr, *eromend;
++
++ s32 cia, cib;
++ u8 ports[2], wrappers[2];
++
++ s32 tmp;
++ u8 i, j;
++
++ int err;
++
++ INIT_LIST_HEAD(&bus->cores);
++ bus->nr_cores = 0;
++
++ bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
++
++ tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
++ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
++ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
++ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
++
++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
++ eromptr = bus->mmio;
++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
++
++ bcma_scan_switch_core(bus, erombase);
++
++ while (eromptr < eromend) {
++ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
++ if (!core)
++ return -ENOMEM;
++ INIT_LIST_HEAD(&core->list);
++ core->bus = bus;
++
++ /* get CIs */
++ cia = bcma_erom_get_ci(bus, &eromptr);
++ if (cia < 0) {
++ bcma_erom_push_ent(&eromptr);
++ if (bcma_erom_is_end(bus, &eromptr))
++ break;
++ err= -EILSEQ;
++ goto out;
++ }
++ cib = bcma_erom_get_ci(bus, &eromptr);
++ if (cib < 0) {
++ err= -EILSEQ;
++ goto out;
++ }
++
++ /* parse CIs */
++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
++
++ if (((core->id.manuf == BCMA_MANUF_ARM) &&
++ (core->id.id == 0xFFF)) ||
++ (ports[1] == 0)) {
++ bcma_erom_skip_component(bus, &eromptr);
++ continue;
++ }
++
++ /* check if component is a core at all */
++ if (wrappers[0] + wrappers[1] == 0) {
++ /* we could save addrl of the router
++ if (cid == BCMA_CORE_OOB_ROUTER)
++ */
++ bcma_erom_skip_component(bus, &eromptr);
++ continue;
++ }
++
++ if (bcma_erom_is_bridge(bus, &eromptr)) {
++ bcma_erom_skip_component(bus, &eromptr);
++ continue;
++ }
++
++ /* get & parse master ports */
++ for (i = 0; i < ports[0]; i++) {
++ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
++ if (mst_port_d < 0) {
++ err= -EILSEQ;
++ goto out;
++ }
++ }
++
++ /* get & parse slave ports */
++ for (i = 0; i < ports[1]; i++) {
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
++ SCAN_ADDR_TYPE_SLAVE, i);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: slave port %d "
++ * "has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (i == 0 && j == 0)
++ core->addr = tmp;
++ }
++ }
++ }
++
++ /* get & parse master wrappers */
++ for (i = 0; i < wrappers[0]; i++) {
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
++ SCAN_ADDR_TYPE_MWRAP, i);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: master wrapper %d "
++ * "has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (i == 0 && j == 0)
++ core->wrap = tmp;
++ }
++ }
++ }
++
++ /* get & parse slave wrappers */
++ for (i = 0; i < wrappers[1]; i++) {
++ u8 hack = (ports[1] == 1) ? 0 : 1;
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
++ SCAN_ADDR_TYPE_SWRAP, i + hack);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: master wrapper %d "
++ * has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (wrappers[0] == 0 && !i && !j)
++ core->wrap = tmp;
++ }
++ }
++ }
++
++ pr_info("Core %d found: %s "
++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++ bus->nr_cores, bcma_device_name(&core->id),
++ core->id.manuf, core->id.id, core->id.rev,
++ core->id.class);
++
++ core->core_index = bus->nr_cores++;
++ list_add(&core->list, &bus->cores);
++ continue;
++out:
++ return err;
++ }
++
++ return 0;
++}
+--- /dev/null
++++ b/drivers/bcma/scan.h
+@@ -0,0 +1,56 @@
++#ifndef BCMA_SCAN_H_
++#define BCMA_SCAN_H_
++
++#define BCMA_ADDR_BASE 0x18000000
++#define BCMA_WRAP_BASE 0x18100000
++
++#define SCAN_ER_VALID 0x00000001
++#define SCAN_ER_TAGX 0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */
++#define SCAN_ER_TAG 0x0000000E
++#define SCAN_ER_TAG_CI 0x00000000
++#define SCAN_ER_TAG_MP 0x00000002
++#define SCAN_ER_TAG_ADDR 0x00000004
++#define SCAN_ER_TAG_END 0x0000000E
++#define SCAN_ER_BAD 0xFFFFFFFF
++
++#define SCAN_CIA_CLASS 0x000000F0
++#define SCAN_CIA_CLASS_SHIFT 4
++#define SCAN_CIA_ID 0x000FFF00
++#define SCAN_CIA_ID_SHIFT 8
++#define SCAN_CIA_MANUF 0xFFF00000
++#define SCAN_CIA_MANUF_SHIFT 20
++
++#define SCAN_CIB_NMP 0x000001F0
++#define SCAN_CIB_NMP_SHIFT 4
++#define SCAN_CIB_NSP 0x00003E00
++#define SCAN_CIB_NSP_SHIFT 9
++#define SCAN_CIB_NMW 0x0007C000
++#define SCAN_CIB_NMW_SHIFT 14
++#define SCAN_CIB_NSW 0x00F80000
++#define SCAN_CIB_NSW_SHIFT 17
++#define SCAN_CIB_REV 0xFF000000
++#define SCAN_CIB_REV_SHIFT 24
++
++#define SCAN_ADDR_AG32 0x00000008
++#define SCAN_ADDR_SZ 0x00000030
++#define SCAN_ADDR_SZ_SHIFT 4
++#define SCAN_ADDR_SZ_4K 0x00000000
++#define SCAN_ADDR_SZ_8K 0x00000010
++#define SCAN_ADDR_SZ_16K 0x00000020
++#define SCAN_ADDR_SZ_SZD 0x00000030
++#define SCAN_ADDR_TYPE 0x000000C0
++#define SCAN_ADDR_TYPE_SLAVE 0x00000000
++#define SCAN_ADDR_TYPE_BRIDGE 0x00000040
++#define SCAN_ADDR_TYPE_SWRAP 0x00000080
++#define SCAN_ADDR_TYPE_MWRAP 0x000000C0
++#define SCAN_ADDR_PORT 0x00000F00
++#define SCAN_ADDR_PORT_SHIFT 8
++#define SCAN_ADDR_ADDR 0xFFFFF000
++
++#define SCAN_ADDR_SZ_BASE 0x00001000 /* 4KB */
++
++#define SCAN_SIZE_SZ_ALIGN 0x00000FFF
++#define SCAN_SIZE_SZ 0xFFFFF000
++#define SCAN_SIZE_SG32 0x00000008
++
++#endif /* BCMA_SCAN_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma.h
+@@ -0,0 +1,250 @@
++#ifndef LINUX_BCMA_H_
++#define LINUX_BCMA_H_
++
++#include <linux/pci.h>
++#include <linux/mod_devicetable.h>
++
++#include <linux/bcma/bcma_driver_chipcommon.h>
++#include <linux/bcma/bcma_driver_pci.h>
++#include <linux/ssb/ssb.h> /* SPROM sharing */
++
++#include "bcma_regs.h"
++
++struct bcma_device;
++struct bcma_bus;
++
++enum bcma_hosttype {
++ BCMA_HOSTTYPE_NONE,
++ BCMA_HOSTTYPE_PCI,
++ BCMA_HOSTTYPE_SDIO,
++};
++
++struct bcma_chipinfo {
++ u16 id;
++ u8 rev;
++ u8 pkg;
++};
++
++struct bcma_host_ops {
++ u8 (*read8)(struct bcma_device *core, u16 offset);
++ u16 (*read16)(struct bcma_device *core, u16 offset);
++ u32 (*read32)(struct bcma_device *core, u16 offset);
++ void (*write8)(struct bcma_device *core, u16 offset, u8 value);
++ void (*write16)(struct bcma_device *core, u16 offset, u16 value);
++ void (*write32)(struct bcma_device *core, u16 offset, u32 value);
++#ifdef CONFIG_BCMA_BLOCKIO
++ void (*block_read)(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width);
++ void (*block_write)(struct bcma_device *core, const void *buffer,
++ size_t count, u16 offset, u8 reg_width);
++#endif
++ /* Agent ops */
++ u32 (*aread32)(struct bcma_device *core, u16 offset);
++ void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
++};
++
++/* Core manufacturers */
++#define BCMA_MANUF_ARM 0x43B
++#define BCMA_MANUF_MIPS 0x4A7
++#define BCMA_MANUF_BCM 0x4BF
++
++/* Core class values. */
++#define BCMA_CL_SIM 0x0
++#define BCMA_CL_EROM 0x1
++#define BCMA_CL_CORESIGHT 0x9
++#define BCMA_CL_VERIF 0xB
++#define BCMA_CL_OPTIMO 0xD
++#define BCMA_CL_GEN 0xE
++#define BCMA_CL_PRIMECELL 0xF
++
++/* Core-ID values. */
++#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
++#define BCMA_CORE_INVALID 0x700
++#define BCMA_CORE_CHIPCOMMON 0x800
++#define BCMA_CORE_ILINE20 0x801
++#define BCMA_CORE_SRAM 0x802
++#define BCMA_CORE_SDRAM 0x803
++#define BCMA_CORE_PCI 0x804
++#define BCMA_CORE_MIPS 0x805
++#define BCMA_CORE_ETHERNET 0x806
++#define BCMA_CORE_V90 0x807
++#define BCMA_CORE_USB11_HOSTDEV 0x808
++#define BCMA_CORE_ADSL 0x809
++#define BCMA_CORE_ILINE100 0x80A
++#define BCMA_CORE_IPSEC 0x80B
++#define BCMA_CORE_UTOPIA 0x80C
++#define BCMA_CORE_PCMCIA 0x80D
++#define BCMA_CORE_INTERNAL_MEM 0x80E
++#define BCMA_CORE_MEMC_SDRAM 0x80F
++#define BCMA_CORE_OFDM 0x810
++#define BCMA_CORE_EXTIF 0x811
++#define BCMA_CORE_80211 0x812
++#define BCMA_CORE_PHY_A 0x813
++#define BCMA_CORE_PHY_B 0x814
++#define BCMA_CORE_PHY_G 0x815
++#define BCMA_CORE_MIPS_3302 0x816
++#define BCMA_CORE_USB11_HOST 0x817
++#define BCMA_CORE_USB11_DEV 0x818
++#define BCMA_CORE_USB20_HOST 0x819
++#define BCMA_CORE_USB20_DEV 0x81A
++#define BCMA_CORE_SDIO_HOST 0x81B
++#define BCMA_CORE_ROBOSWITCH 0x81C
++#define BCMA_CORE_PARA_ATA 0x81D
++#define BCMA_CORE_SATA_XORDMA 0x81E
++#define BCMA_CORE_ETHERNET_GBIT 0x81F
++#define BCMA_CORE_PCIE 0x820
++#define BCMA_CORE_PHY_N 0x821
++#define BCMA_CORE_SRAM_CTL 0x822
++#define BCMA_CORE_MINI_MACPHY 0x823
++#define BCMA_CORE_ARM_1176 0x824
++#define BCMA_CORE_ARM_7TDMI 0x825
++#define BCMA_CORE_PHY_LP 0x826
++#define BCMA_CORE_PMU 0x827
++#define BCMA_CORE_PHY_SSN 0x828
++#define BCMA_CORE_SDIO_DEV 0x829
++#define BCMA_CORE_ARM_CM3 0x82A
++#define BCMA_CORE_PHY_HT 0x82B
++#define BCMA_CORE_MIPS_74K 0x82C
++#define BCMA_CORE_MAC_GBIT 0x82D
++#define BCMA_CORE_DDR12_MEM_CTL 0x82E
++#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */
++#define BCMA_CORE_OCP_OCP_BRIDGE 0x830
++#define BCMA_CORE_SHARED_COMMON 0x831
++#define BCMA_CORE_OCP_AHB_BRIDGE 0x832
++#define BCMA_CORE_SPI_HOST 0x833
++#define BCMA_CORE_I2S 0x834
++#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
++#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
++#define BCMA_CORE_DEFAULT 0xFFF
++
++#define BCMA_MAX_NR_CORES 16
++
++struct bcma_device {
++ struct bcma_bus *bus;
++ struct bcma_device_id id;
++
++ struct device dev;
++ struct device *dma_dev;
++ unsigned int irq;
++ bool dev_registered;
++
++ u8 core_index;
++
++ u32 addr;
++ u32 wrap;
++
++ void *drvdata;
++ struct list_head list;
++};
++
++static inline void *bcma_get_drvdata(struct bcma_device *core)
++{
++ return core->drvdata;
++}
++static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
++{
++ core->drvdata = drvdata;
++}
++
++struct bcma_driver {
++ const char *name;
++ const struct bcma_device_id *id_table;
++
++ int (*probe)(struct bcma_device *dev);
++ void (*remove)(struct bcma_device *dev);
++ int (*suspend)(struct bcma_device *dev, pm_message_t state);
++ int (*resume)(struct bcma_device *dev);
++ void (*shutdown)(struct bcma_device *dev);
++
++ struct device_driver drv;
++};
++extern
++int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
++static inline int bcma_driver_register(struct bcma_driver *drv)
++{
++ return __bcma_driver_register(drv, THIS_MODULE);
++}
++extern void bcma_driver_unregister(struct bcma_driver *drv);
++
++struct bcma_bus {
++ /* The MMIO area. */
++ void __iomem *mmio;
++
++ const struct bcma_host_ops *ops;
++
++ enum bcma_hosttype hosttype;
++ union {
++ /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
++ struct pci_dev *host_pci;
++ /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
++ struct sdio_func *host_sdio;
++ };
++
++ struct bcma_chipinfo chipinfo;
++
++ struct bcma_device *mapped_core;
++ struct list_head cores;
++ u8 nr_cores;
++
++ struct bcma_drv_cc drv_cc;
++ struct bcma_drv_pci drv_pci;
++
++ /* We decided to share SPROM struct with SSB as long as we do not need
++ * any hacks for BCMA. This simplifies drivers code. */
++ struct ssb_sprom sprom;
++};
++
++extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
++{
++ return core->bus->ops->read8(core, offset);
++}
++extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
++{
++ return core->bus->ops->read16(core, offset);
++}
++extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
++{
++ return core->bus->ops->read32(core, offset);
++}
++extern inline
++void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
++{
++ core->bus->ops->write8(core, offset, value);
++}
++extern inline
++void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
++{
++ core->bus->ops->write16(core, offset, value);
++}
++extern inline
++void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
++{
++ core->bus->ops->write32(core, offset, value);
++}
++#ifdef CONFIG_BCMA_BLOCKIO
++extern inline void bcma_block_read(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ core->bus->ops->block_read(core, buffer, count, offset, reg_width);
++}
++extern inline void bcma_block_write(struct bcma_device *core, const void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ core->bus->ops->block_write(core, buffer, count, offset, reg_width);
++}
++#endif
++extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
++{
++ return core->bus->ops->aread32(core, offset);
++}
++extern inline
++void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
++{
++ core->bus->ops->awrite32(core, offset, value);
++}
++
++extern bool bcma_core_is_enabled(struct bcma_device *core);
++extern void bcma_core_disable(struct bcma_device *core, u32 flags);
++extern int bcma_core_enable(struct bcma_device *core, u32 flags);
++
++#endif /* LINUX_BCMA_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -0,0 +1,303 @@
++#ifndef LINUX_BCMA_DRIVER_CC_H_
++#define LINUX_BCMA_DRIVER_CC_H_
++
++/** ChipCommon core registers. **/
++#define BCMA_CC_ID 0x0000
++#define BCMA_CC_ID_ID 0x0000FFFF
++#define BCMA_CC_ID_ID_SHIFT 0
++#define BCMA_CC_ID_REV 0x000F0000
++#define BCMA_CC_ID_REV_SHIFT 16
++#define BCMA_CC_ID_PKG 0x00F00000
++#define BCMA_CC_ID_PKG_SHIFT 20
++#define BCMA_CC_ID_NRCORES 0x0F000000
++#define BCMA_CC_ID_NRCORES_SHIFT 24
++#define BCMA_CC_ID_TYPE 0xF0000000
++#define BCMA_CC_ID_TYPE_SHIFT 28
++#define BCMA_CC_CAP 0x0004 /* Capabilities */
++#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */
++#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
++#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */
++#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
++#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
++#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */
++#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */
++#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
++#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
++#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
++#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
++#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
++#define BCMA_PLLTYPE_NONE 0x00000000
++#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
++#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
++#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
++#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
++#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
++#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
++#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
++#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */
++#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */
++#define BCMA_CC_CAP_OTPS_SHIFT 19
++#define BCMA_CC_CAP_OTPS_BASE 5
++#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */
++#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */
++#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */
++#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
++#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
++#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
++#define BCMA_CC_CORECTL 0x0008
++#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
++#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
++#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
++#define BCMA_CC_BIST 0x000C
++#define BCMA_CC_OTPS 0x0010 /* OTP status */
++#define BCMA_CC_OTPS_PROGFAIL 0x80000000
++#define BCMA_CC_OTPS_PROTECT 0x00000007
++#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
++#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
++#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
++#define BCMA_CC_OTPC 0x0014 /* OTP control */
++#define BCMA_CC_OTPC_RECWAIT 0xFF000000
++#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
++#define BCMA_CC_OTPC_PRW_SHIFT 8
++#define BCMA_CC_OTPC_MAXFAIL 0x00000038
++#define BCMA_CC_OTPC_VSEL 0x00000006
++#define BCMA_CC_OTPC_SELVL 0x00000001
++#define BCMA_CC_OTPP 0x0018 /* OTP prog */
++#define BCMA_CC_OTPP_COL 0x000000FF
++#define BCMA_CC_OTPP_ROW 0x0000FF00
++#define BCMA_CC_OTPP_ROW_SHIFT 8
++#define BCMA_CC_OTPP_READERR 0x10000000
++#define BCMA_CC_OTPP_VALUE 0x20000000
++#define BCMA_CC_OTPP_READ 0x40000000
++#define BCMA_CC_OTPP_START 0x80000000
++#define BCMA_CC_OTPP_BUSY 0x80000000
++#define BCMA_CC_IRQSTAT 0x0020
++#define BCMA_CC_IRQMASK 0x0024
++#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
++#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
++#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
++#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
++#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
++#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
++#define BCMA_CC_JCMD_START 0x80000000
++#define BCMA_CC_JCMD_BUSY 0x80000000
++#define BCMA_CC_JCMD_PAUSE 0x40000000
++#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000
++#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000
++#define BCMA_CC_JCMD0_ACC_DR 0x00001000
++#define BCMA_CC_JCMD0_ACC_IR 0x00002000
++#define BCMA_CC_JCMD0_ACC_RESET 0x00003000
++#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000
++#define BCMA_CC_JCMD0_ACC_PDR 0x00005000
++#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00
++#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
++#define BCMA_CC_JCMD_ACC_IRDR 0x00000000
++#define BCMA_CC_JCMD_ACC_DR 0x00010000
++#define BCMA_CC_JCMD_ACC_IR 0x00020000
++#define BCMA_CC_JCMD_ACC_RESET 0x00030000
++#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000
++#define BCMA_CC_JCMD_ACC_PDR 0x00050000
++#define BCMA_CC_JCMD_IRW_MASK 0x00001F00
++#define BCMA_CC_JCMD_IRW_SHIFT 8
++#define BCMA_CC_JCMD_DRW_MASK 0x0000003F
++#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */
++#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */
++#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */
++#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */
++#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
++#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
++#define BCMA_CC_FLASHCTL 0x0040
++#define BCMA_CC_FLASHCTL_START 0x80000000
++#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
++#define BCMA_CC_FLASHADDR 0x0044
++#define BCMA_CC_FLASHDATA 0x0048
++#define BCMA_CC_BCAST_ADDR 0x0050
++#define BCMA_CC_BCAST_DATA 0x0054
++#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
++#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
++#define BCMA_CC_GPIOIN 0x0060
++#define BCMA_CC_GPIOOUT 0x0064
++#define BCMA_CC_GPIOOUTEN 0x0068
++#define BCMA_CC_GPIOCTL 0x006C
++#define BCMA_CC_GPIOPOL 0x0070
++#define BCMA_CC_GPIOIRQ 0x0074
++#define BCMA_CC_WATCHDOG 0x0080
++#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
++#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF
++#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0
++#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000
++#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16
++#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
++#define BCMA_CC_CLOCK_N 0x0090
++#define BCMA_CC_CLOCK_SB 0x0094
++#define BCMA_CC_CLOCK_PCI 0x0098
++#define BCMA_CC_CLOCK_M2 0x009C
++#define BCMA_CC_CLOCK_MIPS 0x00A0
++#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */
++#define BCMA_CC_CLKDIV_SFLASH 0x0F000000
++#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24
++#define BCMA_CC_CLKDIV_OTP 0x000F0000
++#define BCMA_CC_CLKDIV_OTP_SHIFT 16
++#define BCMA_CC_CLKDIV_JTAG 0x00000F00
++#define BCMA_CC_CLKDIV_JTAG_SHIFT 8
++#define BCMA_CC_CLKDIV_UART 0x000000FF
++#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
++#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
++#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
++#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
++#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
++#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
++#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
++#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
++#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
++#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
++#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
++#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
++#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
++#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
++#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
++#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16
++#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
++#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
++#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
++#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
++#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
++#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
++#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
++#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16
++#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */
++#define BCMA_CC_EROM 0x00FC
++#define BCMA_CC_PCMCIA_CFG 0x0100
++#define BCMA_CC_PCMCIA_MEMWAIT 0x0104
++#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108
++#define BCMA_CC_PCMCIA_IOWAIT 0x010C
++#define BCMA_CC_IDE_CFG 0x0110
++#define BCMA_CC_IDE_MEMWAIT 0x0114
++#define BCMA_CC_IDE_ATTRWAIT 0x0118
++#define BCMA_CC_IDE_IOWAIT 0x011C
++#define BCMA_CC_PROG_CFG 0x0120
++#define BCMA_CC_PROG_WAITCNT 0x0124
++#define BCMA_CC_FLASH_CFG 0x0128
++#define BCMA_CC_FLASH_WAITCNT 0x012C
++#define BCMA_CC_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */
++#define BCMA_CC_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
++#define BCMA_CC_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
++#define BCMA_CC_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
++#define BCMA_CC_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
++#define BCMA_CC_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
++#define BCMA_CC_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
++#define BCMA_CC_CLKCTLST_HAVEHT 0x00010000 /* HT available */
++#define BCMA_CC_CLKCTLST_HAVEALP 0x00020000 /* APL available */
++#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
++#define BCMA_CC_UART0_DATA 0x0300
++#define BCMA_CC_UART0_IMR 0x0304
++#define BCMA_CC_UART0_FCR 0x0308
++#define BCMA_CC_UART0_LCR 0x030C
++#define BCMA_CC_UART0_MCR 0x0310
++#define BCMA_CC_UART0_LSR 0x0314
++#define BCMA_CC_UART0_MSR 0x0318
++#define BCMA_CC_UART0_SCRATCH 0x031C
++#define BCMA_CC_UART1_DATA 0x0400
++#define BCMA_CC_UART1_IMR 0x0404
++#define BCMA_CC_UART1_FCR 0x0408
++#define BCMA_CC_UART1_LCR 0x040C
++#define BCMA_CC_UART1_MCR 0x0410
++#define BCMA_CC_UART1_LSR 0x0414
++#define BCMA_CC_UART1_MSR 0x0418
++#define BCMA_CC_UART1_SCRATCH 0x041C
++/* PMU registers (rev >= 20) */
++#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
++#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
++#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
++#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
++#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
++#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
++#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
++#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2
++#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
++#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
++#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
++#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
++#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
++#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
++#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
++#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */
++#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */
++#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */
++#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */
++#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */
++#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
++#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
++#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
++#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
++#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
++#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */
++#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
++#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */
++#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
++#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
++#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
++#define BCMA_CC_CHIPCTL_ADDR 0x0650
++#define BCMA_CC_CHIPCTL_DATA 0x0654
++#define BCMA_CC_REGCTL_ADDR 0x0658
++#define BCMA_CC_REGCTL_DATA 0x065C
++#define BCMA_CC_PLLCTL_ADDR 0x0660
++#define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_SPROM 0x0830 /* SPROM beginning */
++
++/* Data for the PMU, if available.
++ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
++ */
++struct bcma_chipcommon_pmu {
++ u8 rev; /* PMU revision */
++ u32 crystalfreq; /* The active crystal frequency (in kHz) */
++};
++
++struct bcma_drv_cc {
++ struct bcma_device *core;
++ u32 status;
++ u32 capabilities;
++ u32 capabilities_ext;
++ /* Fast Powerup Delay constant */
++ u16 fast_pwrup_delay;
++ struct bcma_chipcommon_pmu pmu;
++};
++
++/* Register access */
++#define bcma_cc_read32(cc, offset) \
++ bcma_read32((cc)->core, offset)
++#define bcma_cc_write32(cc, offset, val) \
++ bcma_write32((cc)->core, offset, val)
++
++#define bcma_cc_mask32(cc, offset, mask) \
++ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
++#define bcma_cc_set32(cc, offset, set) \
++ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
++#define bcma_cc_maskset32(cc, offset, mask, set) \
++ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
++
++extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
++
++extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
++extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
++
++extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
++ u32 ticks);
++
++void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
++
++u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
++
++/* Chipcommon GPIO pin access. */
++u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
++u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
++
++/* PMU support */
++extern void bcma_pmu_init(struct bcma_drv_cc *cc);
++
++#endif /* LINUX_BCMA_DRIVER_CC_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -0,0 +1,91 @@
++#ifndef LINUX_BCMA_DRIVER_PCI_H_
++#define LINUX_BCMA_DRIVER_PCI_H_
++
++#include <linux/types.h>
++
++struct pci_dev;
++
++/** PCI core registers. **/
++#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */
++#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
++#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
++#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
++#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
++#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */
++#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
++#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
++#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
++#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
++#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
++#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
++#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
++#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */
++#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */
++#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */
++#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
++#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
++#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */
++#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */
++#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */
++#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */
++#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */
++#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */
++#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */
++#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */
++#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
++#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
++#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
++#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
++#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
++#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
++#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
++#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
++#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
++#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF
++#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
++#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */
++#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */
++#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */
++#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */
++#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
++#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000
++#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
++#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
++#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
++#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
++#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
++#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
++#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
++#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
++#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
++
++/* SBtoPCIx */
++#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
++#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001
++#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002
++#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003
++#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
++#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */
++#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
++#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
++#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */
++#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
++#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
++
++/* PCIcore specific boardflags */
++#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
++
++struct bcma_drv_pci {
++ struct bcma_device *core;
++ u8 setup_done:1;
++};
++
++/* Register access */
++#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
++#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
++
++extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
++extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
++ struct bcma_device *core, bool enable);
++
++#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_regs.h
+@@ -0,0 +1,34 @@
++#ifndef LINUX_BCMA_REGS_H_
++#define LINUX_BCMA_REGS_H_
++
++/* Agent registers (common for every core) */
++#define BCMA_IOCTL 0x0408
++#define BCMA_IOCTL_CLK 0x0001
++#define BCMA_IOCTL_FGC 0x0002
++#define BCMA_IOCTL_CORE_BITS 0x3FFC
++#define BCMA_IOCTL_PME_EN 0x4000
++#define BCMA_IOCTL_BIST_EN 0x8000
++#define BCMA_RESET_CTL 0x0800
++#define BCMA_RESET_CTL_RESET 0x0001
++
++/* BCMA PCI config space registers. */
++#define BCMA_PCI_PMCSR 0x44
++#define BCMA_PCI_PE 0x100
++#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */
++#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */
++#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */
++#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */
++#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */
++#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */
++#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
++#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
++#define BCMA_PCI_BAR0_WIN2 0xAC
++#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
++#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
++#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
++#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
++#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
++#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
++#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
++
++#endif /* LINUX_BCMA_REGS_H_ */
+--- a/include/linux/mod_devicetable.h
++++ b/include/linux/mod_devicetable.h
+@@ -382,6 +382,23 @@ struct ssb_device_id {
+ #define SSB_ANY_ID 0xFFFF
+ #define SSB_ANY_REV 0xFF
+
++/* Broadcom's specific AMBA core, see drivers/bcma/ */
++struct bcma_device_id {
++ __u16 manuf;
++ __u16 id;
++ __u8 rev;
++ __u8 class;
++};
++#define BCMA_CORE(_manuf, _id, _rev, _class) \
++ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
++#define BCMA_CORETABLE_END \
++ { 0, },
++
++#define BCMA_ANY_MANUF 0xFFFF
++#define BCMA_ANY_ID 0xFFFF
++#define BCMA_ANY_REV 0xFF
++#define BCMA_ANY_CLASS 0xFF
++
+ struct virtio_device_id {
+ __u32 device;
+ __u32 vendor;
+--- a/scripts/mod/file2alias.c
++++ b/scripts/mod/file2alias.c
+@@ -702,6 +702,24 @@ static int do_ssb_entry(const char *file
+ return 1;
+ }
+
++/* Looks like: bcma:mNidNrevNclN. */
++static int do_bcma_entry(const char *filename,
++ struct bcma_device_id *id, char *alias)
++{
++ id->manuf = TO_NATIVE(id->manuf);
++ id->id = TO_NATIVE(id->id);
++ id->rev = TO_NATIVE(id->rev);
++ id->class = TO_NATIVE(id->class);
++
++ strcpy(alias, "bcma:");
++ ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf);
++ ADD(alias, "id", id->id != BCMA_ANY_ID, id->id);
++ ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev);
++ ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class);
++ add_wildcard(alias);
++ return 1;
++}
++
+ /* Looks like: virtio:dNvN */
+ static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
+ char *alias)
+@@ -968,6 +986,10 @@ void handle_moddevtable(struct module *m
+ do_table(symval, sym->st_size,
+ sizeof(struct ssb_device_id), "ssb",
+ do_ssb_entry, mod);
++ else if (sym_is(symname, "__mod_bcma_device_table"))
++ do_table(symval, sym->st_size,
++ sizeof(struct bcma_device_id), "bcma",
++ do_bcma_entry, mod);
+ else if (sym_is(symname, "__mod_virtio_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct virtio_device_id), "virtio",
+--- /dev/null
++++ b/drivers/bcma/sprom.c
+@@ -0,0 +1,162 @@
++/*
++ * Broadcom specific AMBA
++ * SPROM reading
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_regs.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <linux/slab.h>
++
++#define SPOFF(offset) ((offset) / sizeof(u16))
++
++/**************************************************
++ * R/W ops.
++ **************************************************/
++
++static void bcma_sprom_read(struct bcma_bus *bus, u16 *sprom)
++{
++ int i;
++ for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core,
++ BCMA_CC_SPROM + (i * 2));
++}
++
++/**************************************************
++ * Validation.
++ **************************************************/
++
++static inline u8 bcma_crc8(u8 crc, u8 data)
++{
++ /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */
++ static const u8 t[] = {
++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F,
++ };
++ return t[crc ^ data];
++}
++
++static u8 bcma_sprom_crc(const u16 *sprom)
++{
++ int word;
++ u8 crc = 0xFF;
++
++ for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
++ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
++ }
++ crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc ^= 0xFF;
++
++ return crc;
++}
++
++static int bcma_sprom_check_crc(const u16 *sprom)
++{
++ u8 crc;
++ u8 expected_crc;
++ u16 tmp;
++
++ crc = bcma_sprom_crc(sprom);
++ tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
++ if (crc != expected_crc)
++ return -EPROTO;
++
++ return 0;
++}
++
++static int bcma_sprom_valid(const u16 *sprom)
++{
++ u16 revision;
++ int err;
++
++ err = bcma_sprom_check_crc(sprom);
++ if (err)
++ return err;
++
++ revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8) {
++ pr_err("Unsupported SPROM revision: %d\n", revision);
++ return -ENOENT;
++ }
++
++ return 0;
++}
++
++/**************************************************
++ * SPROM extraction.
++ **************************************************/
++
++static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
++{
++ u16 v;
++ int i;
++
++ for (i = 0; i < 3; i++) {
++ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
++ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
++ }
++}
++
++int bcma_sprom_get(struct bcma_bus *bus)
++{
++ u16 *sprom;
++ int err = 0;
++
++ if (!bus->drv_cc.core)
++ return -EOPNOTSUPP;
++
++ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
++ GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, sprom);
++
++ err = bcma_sprom_valid(sprom);
++ if (err)
++ goto out;
++
++ bcma_sprom_extract_r8(bus, sprom);
++
++out:
++ kfree(sprom);
++ return err;
++}