diff options
Diffstat (limited to 'target')
11 files changed, 824 insertions, 0 deletions
diff --git a/target/linux/generic/patches-4.0/072-05-bgmac-leave-interrupts-disabled-as-long-as-there-is-.patch b/target/linux/generic/patches-4.0/072-05-bgmac-leave-interrupts-disabled-as-long-as-there-is-.patch new file mode 100644 index 0000000000..3bbe9ea9cb --- /dev/null +++ b/target/linux/generic/patches-4.0/072-05-bgmac-leave-interrupts-disabled-as-long-as-there-is-.patch @@ -0,0 +1,87 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Sun, 12 Apr 2015 10:08:04 +0200 +Subject: [PATCH] bgmac: leave interrupts disabled as long as there is work + to do + +Always poll rx and tx during NAPI poll instead of relying on the status +of the first interrupt. This prevents bgmac_poll from leaving unfinished +work around until the next IRQ. +In my tests this makes bridging/routing throughput under heavy load more +stable and ensures that no new IRQs arrive as long as bgmac_poll uses up +the entire budget. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -1109,8 +1109,6 @@ static void bgmac_chip_reset(struct bgma + bgmac_phy_init(bgmac); + + netdev_reset_queue(bgmac->net_dev); +- +- bgmac->int_status = 0; + } + + static void bgmac_chip_intrs_on(struct bgmac *bgmac) +@@ -1225,14 +1223,13 @@ static irqreturn_t bgmac_interrupt(int i + if (!int_status) + return IRQ_NONE; + +- /* Ack */ +- bgmac_write(bgmac, BGMAC_INT_STATUS, int_status); ++ int_status &= ~(BGMAC_IS_TX0 | BGMAC_IS_RX); ++ if (int_status) ++ bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", int_status); + + /* Disable new interrupts until handling existing ones */ + bgmac_chip_intrs_off(bgmac); + +- bgmac->int_status = int_status; +- + napi_schedule(&bgmac->napi); + + return IRQ_HANDLED; +@@ -1241,25 +1238,17 @@ static irqreturn_t bgmac_interrupt(int i + static int bgmac_poll(struct napi_struct *napi, int weight) + { + struct bgmac *bgmac = container_of(napi, struct bgmac, napi); +- struct bgmac_dma_ring *ring; + int handled = 0; + +- if (bgmac->int_status & BGMAC_IS_TX0) { +- ring = &bgmac->tx_ring[0]; +- bgmac_dma_tx_free(bgmac, ring); +- bgmac->int_status &= ~BGMAC_IS_TX0; +- } ++ /* Ack */ ++ bgmac_write(bgmac, BGMAC_INT_STATUS, ~0); + +- if (bgmac->int_status & BGMAC_IS_RX) { +- ring = &bgmac->rx_ring[0]; +- handled += bgmac_dma_rx_read(bgmac, ring, weight); +- bgmac->int_status &= ~BGMAC_IS_RX; +- } ++ bgmac_dma_tx_free(bgmac, &bgmac->tx_ring[0]); ++ handled += bgmac_dma_rx_read(bgmac, &bgmac->rx_ring[0], weight); + +- if (bgmac->int_status) { +- bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status); +- bgmac->int_status = 0; +- } ++ /* Poll again if more events arrived in the meantime */ ++ if (bgmac_read(bgmac, BGMAC_INT_STATUS) & (BGMAC_IS_TX0 | BGMAC_IS_RX)) ++ return handled; + + if (handled < weight) { + napi_complete(napi); +--- a/drivers/net/ethernet/broadcom/bgmac.h ++++ b/drivers/net/ethernet/broadcom/bgmac.h +@@ -452,7 +452,6 @@ struct bgmac { + + /* Int */ + u32 int_mask; +- u32 int_status; + + /* Current MAC state */ + int mac_speed; diff --git a/target/linux/generic/patches-4.0/072-06-bgmac-set-received-skb-headroom-to-NET_SKB_PAD.patch b/target/linux/generic/patches-4.0/072-06-bgmac-set-received-skb-headroom-to-NET_SKB_PAD.patch new file mode 100644 index 0000000000..2c490efbbb --- /dev/null +++ b/target/linux/generic/patches-4.0/072-06-bgmac-set-received-skb-headroom-to-NET_SKB_PAD.patch @@ -0,0 +1,66 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Sun, 12 Apr 2015 10:13:28 +0200 +Subject: [PATCH] bgmac: set received skb headroom to NET_SKB_PAD + +A packet buffer offset of 30 bytes is inefficient, because the first 2 +bytes end up in a different cacheline. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -346,13 +346,13 @@ static int bgmac_dma_rx_skb_for_slot(str + return -ENOMEM; + + /* Poison - if everything goes fine, hardware will overwrite it */ +- rx = buf; ++ rx = buf + BGMAC_RX_BUF_OFFSET; + rx->len = cpu_to_le16(0xdead); + rx->flags = cpu_to_le16(0xbeef); + + /* Map skb for the DMA */ +- dma_addr = dma_map_single(dma_dev, buf, BGMAC_RX_BUF_SIZE, +- DMA_FROM_DEVICE); ++ dma_addr = dma_map_single(dma_dev, buf + BGMAC_RX_BUF_OFFSET, ++ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(dma_dev, dma_addr)) { + bgmac_err(bgmac, "DMA mapping error\n"); + put_page(virt_to_head_page(buf)); +@@ -403,7 +403,7 @@ static int bgmac_dma_rx_read(struct bgma + while (ring->start != ring->end) { + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_slot_info *slot = &ring->slots[ring->start]; +- struct bgmac_rx_header *rx = slot->buf; ++ struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET; + struct sk_buff *skb; + void *buf = slot->buf; + u16 len, flags; +@@ -454,8 +454,10 @@ static int bgmac_dma_rx_read(struct bgma + BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + + skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE); +- skb_put(skb, BGMAC_RX_FRAME_OFFSET + len); +- skb_pull(skb, BGMAC_RX_FRAME_OFFSET); ++ skb_put(skb, BGMAC_RX_FRAME_OFFSET + ++ BGMAC_RX_BUF_OFFSET + len); ++ skb_pull(skb, BGMAC_RX_FRAME_OFFSET + ++ BGMAC_RX_BUF_OFFSET); + + skb_checksum_none_assert(skb); + skb->protocol = eth_type_trans(skb, bgmac->net_dev); +--- a/drivers/net/ethernet/broadcom/bgmac.h ++++ b/drivers/net/ethernet/broadcom/bgmac.h +@@ -360,9 +360,11 @@ + + #define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */ + #define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */ ++#define BGMAC_RX_BUF_OFFSET (NET_SKB_PAD + NET_IP_ALIGN - \ ++ BGMAC_RX_FRAME_OFFSET) + #define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */ + #define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE) +-#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE) + \ ++#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \ + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) + + #define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */ diff --git a/target/linux/generic/patches-4.0/072-07-bgmac-simplify-rx-DMA-error-handling.patch b/target/linux/generic/patches-4.0/072-07-bgmac-simplify-rx-DMA-error-handling.patch new file mode 100644 index 0000000000..2ca9d10f63 --- /dev/null +++ b/target/linux/generic/patches-4.0/072-07-bgmac-simplify-rx-DMA-error-handling.patch @@ -0,0 +1,130 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Sun, 12 Apr 2015 22:23:07 +0200 +Subject: [PATCH] bgmac: simplify/optimize rx DMA error handling + +Allocate a new buffer before processing the completed one. If allocation +fails, reuse the old buffer. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -386,6 +386,19 @@ static void bgmac_dma_rx_setup_desc(stru + dma_desc->ctl1 = cpu_to_le32(ctl1); + } + ++static void bgmac_dma_rx_poison_buf(struct device *dma_dev, ++ struct bgmac_slot_info *slot) ++{ ++ struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET; ++ ++ dma_sync_single_for_cpu(dma_dev, slot->dma_addr, BGMAC_RX_BUF_SIZE, ++ DMA_FROM_DEVICE); ++ rx->len = cpu_to_le16(0xdead); ++ rx->flags = cpu_to_le16(0xbeef); ++ dma_sync_single_for_device(dma_dev, slot->dma_addr, BGMAC_RX_BUF_SIZE, ++ DMA_FROM_DEVICE); ++} ++ + static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring, + int weight) + { +@@ -406,53 +419,35 @@ static int bgmac_dma_rx_read(struct bgma + struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET; + struct sk_buff *skb; + void *buf = slot->buf; ++ dma_addr_t dma_addr = slot->dma_addr; + u16 len, flags; + +- /* Unmap buffer to make it accessible to the CPU */ +- dma_sync_single_for_cpu(dma_dev, slot->dma_addr, +- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); +- +- /* Get info from the header */ +- len = le16_to_cpu(rx->len); +- flags = le16_to_cpu(rx->flags); +- + do { +- dma_addr_t old_dma_addr = slot->dma_addr; +- int err; ++ /* Prepare new skb as replacement */ ++ if (bgmac_dma_rx_skb_for_slot(bgmac, slot)) { ++ bgmac_dma_rx_poison_buf(dma_dev, slot); ++ break; ++ } ++ ++ /* Unmap buffer to make it accessible to the CPU */ ++ dma_unmap_single(dma_dev, dma_addr, ++ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); ++ ++ /* Get info from the header */ ++ len = le16_to_cpu(rx->len); ++ flags = le16_to_cpu(rx->flags); + + /* Check for poison and drop or pass the packet */ + if (len == 0xdead && flags == 0xbeef) { + bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", + ring->start); +- dma_sync_single_for_device(dma_dev, +- slot->dma_addr, +- BGMAC_RX_BUF_SIZE, +- DMA_FROM_DEVICE); ++ put_page(virt_to_head_page(buf)); + break; + } + + /* Omit CRC. */ + len -= ETH_FCS_LEN; + +- /* Prepare new skb as replacement */ +- err = bgmac_dma_rx_skb_for_slot(bgmac, slot); +- if (err) { +- /* Poison the old skb */ +- rx->len = cpu_to_le16(0xdead); +- rx->flags = cpu_to_le16(0xbeef); +- +- dma_sync_single_for_device(dma_dev, +- slot->dma_addr, +- BGMAC_RX_BUF_SIZE, +- DMA_FROM_DEVICE); +- break; +- } +- bgmac_dma_rx_setup_desc(bgmac, ring, ring->start); +- +- /* Unmap old skb, we'll pass it to the netfif */ +- dma_unmap_single(dma_dev, old_dma_addr, +- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); +- + skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE); + skb_put(skb, BGMAC_RX_FRAME_OFFSET + + BGMAC_RX_BUF_OFFSET + len); +@@ -465,6 +460,8 @@ static int bgmac_dma_rx_read(struct bgma + handled++; + } while (0); + ++ bgmac_dma_rx_setup_desc(bgmac, ring, ring->start); ++ + if (++ring->start >= BGMAC_RX_RING_SLOTS) + ring->start = 0; + +@@ -532,14 +529,14 @@ static void bgmac_dma_rx_ring_free(struc + + for (i = 0; i < ring->num_slots; i++) { + slot = &ring->slots[i]; +- if (!slot->buf) ++ if (!slot->dma_addr) + continue; + +- if (slot->dma_addr) +- dma_unmap_single(dma_dev, slot->dma_addr, +- BGMAC_RX_BUF_SIZE, +- DMA_FROM_DEVICE); ++ dma_unmap_single(dma_dev, slot->dma_addr, ++ BGMAC_RX_BUF_SIZE, ++ DMA_FROM_DEVICE); + put_page(virt_to_head_page(slot->buf)); ++ slot->dma_addr = 0; + } + } + diff --git a/target/linux/generic/patches-4.0/072-08-bgmac-add-check-for-oversized-packets.patch b/target/linux/generic/patches-4.0/072-08-bgmac-add-check-for-oversized-packets.patch new file mode 100644 index 0000000000..705aa2d2a4 --- /dev/null +++ b/target/linux/generic/patches-4.0/072-08-bgmac-add-check-for-oversized-packets.patch @@ -0,0 +1,27 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Sun, 12 Apr 2015 22:28:20 +0200 +Subject: [PATCH] bgmac: add check for oversized packets + +In very rare cases, the MAC can catch an internal buffer that is bigger +than it's supposed to be. Instead of crashing the kernel, simply pass +the buffer back to the hardware + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -445,6 +445,13 @@ static int bgmac_dma_rx_read(struct bgma + break; + } + ++ if (len > BGMAC_RX_ALLOC_SIZE) { ++ bgmac_err(bgmac, "Found oversized packet at slot %d, DMA issue!\n", ++ ring->start); ++ put_page(virt_to_head_page(buf)); ++ break; ++ } ++ + /* Omit CRC. */ + len -= ETH_FCS_LEN; + diff --git a/target/linux/generic/patches-4.0/072-09-bgmac-increase-rx-ring-size-from-511-to-512.patch b/target/linux/generic/patches-4.0/072-09-bgmac-increase-rx-ring-size-from-511-to-512.patch new file mode 100644 index 0000000000..4888cc32af --- /dev/null +++ b/target/linux/generic/patches-4.0/072-09-bgmac-increase-rx-ring-size-from-511-to-512.patch @@ -0,0 +1,23 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Sun, 12 Apr 2015 22:36:16 +0200 +Subject: [PATCH] bgmac: increase rx ring size from 511 to 512 + +Limiting it to 511 looks like a failed attempt at leaving one descriptor +empty to allow the hardware to stop processing a buffer that has not +been prepared yet. However, this doesn't work because this affects the +total ring size as well + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.h ++++ b/drivers/net/ethernet/broadcom/bgmac.h +@@ -356,7 +356,7 @@ + #define BGMAC_MAX_RX_RINGS 1 + + #define BGMAC_TX_RING_SLOTS 128 +-#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */ ++#define BGMAC_RX_RING_SLOTS 512 + + #define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */ + #define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */ diff --git a/target/linux/generic/patches-4.0/072-10-bgmac-simplify-dma-init-cleanup.patch b/target/linux/generic/patches-4.0/072-10-bgmac-simplify-dma-init-cleanup.patch new file mode 100644 index 0000000000..f8d7921159 --- /dev/null +++ b/target/linux/generic/patches-4.0/072-10-bgmac-simplify-dma-init-cleanup.patch @@ -0,0 +1,184 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Sun, 12 Apr 2015 23:19:32 +0200 +Subject: [PATCH] bgmac: simplify dma init/cleanup + +Instead of allocating buffers at device init time and initializing +descriptors at device open, do both at the same time (during open). +Free all buffers when closing the device. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -562,18 +562,26 @@ static void bgmac_dma_ring_desc_free(str + ring->dma_base); + } + +-static void bgmac_dma_free(struct bgmac *bgmac) ++static void bgmac_dma_cleanup(struct bgmac *bgmac) + { + int i; + +- for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { ++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) + bgmac_dma_tx_ring_free(bgmac, &bgmac->tx_ring[i]); +- bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]); +- } +- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { ++ ++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) + bgmac_dma_rx_ring_free(bgmac, &bgmac->rx_ring[i]); ++} ++ ++static void bgmac_dma_free(struct bgmac *bgmac) ++{ ++ int i; ++ ++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) ++ bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]); ++ ++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) + bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i]); +- } + } + + static int bgmac_dma_alloc(struct bgmac *bgmac) +@@ -621,8 +629,6 @@ static int bgmac_dma_alloc(struct bgmac + } + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { +- int j; +- + ring = &bgmac->rx_ring[i]; + ring->num_slots = BGMAC_RX_RING_SLOTS; + ring->mmio_base = ring_base[i]; +@@ -645,15 +651,6 @@ static int bgmac_dma_alloc(struct bgmac + ring->index_base = lower_32_bits(ring->dma_base); + else + ring->index_base = 0; +- +- /* Alloc RX slots */ +- for (j = 0; j < ring->num_slots; j++) { +- err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]); +- if (err) { +- bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n"); +- goto err_dma_free; +- } +- } + } + + return 0; +@@ -663,10 +660,10 @@ err_dma_free: + return -ENOMEM; + } + +-static void bgmac_dma_init(struct bgmac *bgmac) ++static int bgmac_dma_init(struct bgmac *bgmac) + { + struct bgmac_dma_ring *ring; +- int i; ++ int i, err; + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { + ring = &bgmac->tx_ring[i]; +@@ -698,8 +695,13 @@ static void bgmac_dma_init(struct bgmac + if (ring->unaligned) + bgmac_dma_rx_enable(bgmac, ring); + +- for (j = 0; j < ring->num_slots; j++) ++ for (j = 0; j < ring->num_slots; j++) { ++ err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]); ++ if (err) ++ goto error; ++ + bgmac_dma_rx_setup_desc(bgmac, ring, j); ++ } + + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX, + ring->index_base + +@@ -708,6 +710,12 @@ static void bgmac_dma_init(struct bgmac + ring->start = 0; + ring->end = 0; + } ++ ++ return 0; ++ ++error: ++ bgmac_dma_cleanup(bgmac); ++ return err; + } + + /************************************************** +@@ -1183,11 +1191,8 @@ static void bgmac_enable(struct bgmac *b + } + + /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */ +-static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) ++static void bgmac_chip_init(struct bgmac *bgmac) + { +- struct bgmac_dma_ring *ring; +- int i; +- + /* 1 interrupt per received frame */ + bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT); + +@@ -1205,16 +1210,7 @@ static void bgmac_chip_init(struct bgmac + + bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); + +- if (full_init) { +- bgmac_dma_init(bgmac); +- if (1) /* FIXME: is there any case we don't want IRQs? */ +- bgmac_chip_intrs_on(bgmac); +- } else { +- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { +- ring = &bgmac->rx_ring[i]; +- bgmac_dma_rx_enable(bgmac, ring); +- } +- } ++ bgmac_chip_intrs_on(bgmac); + + bgmac_enable(bgmac); + } +@@ -1274,23 +1270,27 @@ static int bgmac_open(struct net_device + int err = 0; + + bgmac_chip_reset(bgmac); ++ ++ err = bgmac_dma_init(bgmac); ++ if (err) ++ return err; ++ + /* Specs say about reclaiming rings here, but we do that in DMA init */ +- bgmac_chip_init(bgmac, true); ++ bgmac_chip_init(bgmac); + + err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED, + KBUILD_MODNAME, net_dev); + if (err < 0) { + bgmac_err(bgmac, "IRQ request error: %d!\n", err); +- goto err_out; ++ bgmac_dma_cleanup(bgmac); ++ return err; + } + napi_enable(&bgmac->napi); + + phy_start(bgmac->phy_dev); + + netif_carrier_on(net_dev); +- +-err_out: +- return err; ++ return 0; + } + + static int bgmac_stop(struct net_device *net_dev) +@@ -1306,6 +1306,7 @@ static int bgmac_stop(struct net_device + free_irq(bgmac->core->irq, net_dev); + + bgmac_chip_reset(bgmac); ++ bgmac_dma_cleanup(bgmac); + + return 0; + } diff --git a/target/linux/generic/patches-4.0/072-11-bgmac-fix-DMA-rx-corruption.patch b/target/linux/generic/patches-4.0/072-11-bgmac-fix-DMA-rx-corruption.patch new file mode 100644 index 0000000000..2e670d89b0 --- /dev/null +++ b/target/linux/generic/patches-4.0/072-11-bgmac-fix-DMA-rx-corruption.patch @@ -0,0 +1,88 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Sun, 12 Apr 2015 11:59:47 +0200 +Subject: [PATCH] bgmac: fix DMA rx corruption + +The driver needs to inform the hardware about the first invalid (not yet +filled) rx slot, by writing its DMA descriptor pointer offset to the +BGMAC_DMA_RX_INDEX register. + +This register was set to a value exceeding the rx ring size, effectively +allowing the hardware constant access to the full ring, regardless of +which slots are initialized. + +To fix this issue, always mark the last filled rx slot as invalid. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -366,6 +366,16 @@ static int bgmac_dma_rx_skb_for_slot(str + return 0; + } + ++static void bgmac_dma_rx_update_index(struct bgmac *bgmac, ++ struct bgmac_dma_ring *ring) ++{ ++ wmb(); ++ ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX, ++ ring->index_base + ++ ring->end * sizeof(struct bgmac_dma_desc)); ++} ++ + static void bgmac_dma_rx_setup_desc(struct bgmac *bgmac, + struct bgmac_dma_ring *ring, int desc_idx) + { +@@ -384,6 +394,8 @@ static void bgmac_dma_rx_setup_desc(stru + dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[desc_idx].dma_addr)); + dma_desc->ctl0 = cpu_to_le32(ctl0); + dma_desc->ctl1 = cpu_to_le32(ctl1); ++ ++ ring->end = desc_idx; + } + + static void bgmac_dma_rx_poison_buf(struct device *dma_dev, +@@ -411,9 +423,7 @@ static int bgmac_dma_rx_read(struct bgma + end_slot &= BGMAC_DMA_RX_STATDPTR; + end_slot /= sizeof(struct bgmac_dma_desc); + +- ring->end = end_slot; +- +- while (ring->start != ring->end) { ++ while (ring->start != end_slot) { + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_slot_info *slot = &ring->slots[ring->start]; + struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET; +@@ -476,6 +486,8 @@ static int bgmac_dma_rx_read(struct bgma + break; + } + ++ bgmac_dma_rx_update_index(bgmac, ring); ++ + return handled; + } + +@@ -695,6 +707,8 @@ static int bgmac_dma_init(struct bgmac * + if (ring->unaligned) + bgmac_dma_rx_enable(bgmac, ring); + ++ ring->start = 0; ++ ring->end = 0; + for (j = 0; j < ring->num_slots; j++) { + err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]); + if (err) +@@ -703,12 +717,7 @@ static int bgmac_dma_init(struct bgmac * + bgmac_dma_rx_setup_desc(bgmac, ring, j); + } + +- bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX, +- ring->index_base + +- ring->num_slots * sizeof(struct bgmac_dma_desc)); +- +- ring->start = 0; +- ring->end = 0; ++ bgmac_dma_rx_update_index(bgmac, ring); + } + + return 0; diff --git a/target/linux/generic/patches-4.0/072-12-bgmac-drop-ring-num_slots.patch b/target/linux/generic/patches-4.0/072-12-bgmac-drop-ring-num_slots.patch new file mode 100644 index 0000000000..4cd2e3f80c --- /dev/null +++ b/target/linux/generic/patches-4.0/072-12-bgmac-drop-ring-num_slots.patch @@ -0,0 +1,132 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Sun, 12 Apr 2015 23:28:38 +0200 +Subject: [PATCH] bgmac: drop ring->num_slots + +The ring size is always known at compile time, so make the code a bit +more efficient + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -123,7 +123,7 @@ bgmac_dma_tx_add_buf(struct bgmac *bgmac + struct bgmac_dma_desc *dma_desc; + u32 ctl1; + +- if (i == ring->num_slots - 1) ++ if (i == BGMAC_TX_RING_SLOTS - 1) + ctl0 |= BGMAC_DESC_CTL0_EOT; + + ctl1 = len & BGMAC_DESC_CTL1_LEN; +@@ -382,7 +382,7 @@ static void bgmac_dma_rx_setup_desc(stru + struct bgmac_dma_desc *dma_desc = ring->cpu_base + desc_idx; + u32 ctl0 = 0, ctl1 = 0; + +- if (desc_idx == ring->num_slots - 1) ++ if (desc_idx == BGMAC_RX_RING_SLOTS - 1) + ctl0 |= BGMAC_DESC_CTL0_EOT; + ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN; + /* Is there any BGMAC device that requires extension? */ +@@ -521,7 +521,7 @@ static void bgmac_dma_tx_ring_free(struc + struct bgmac_slot_info *slot; + int i; + +- for (i = 0; i < ring->num_slots; i++) { ++ for (i = 0; i < BGMAC_TX_RING_SLOTS; i++) { + int len = dma_desc[i].ctl1 & BGMAC_DESC_CTL1_LEN; + + slot = &ring->slots[i]; +@@ -546,7 +546,7 @@ static void bgmac_dma_rx_ring_free(struc + struct bgmac_slot_info *slot; + int i; + +- for (i = 0; i < ring->num_slots; i++) { ++ for (i = 0; i < BGMAC_RX_RING_SLOTS; i++) { + slot = &ring->slots[i]; + if (!slot->dma_addr) + continue; +@@ -560,7 +560,8 @@ static void bgmac_dma_rx_ring_free(struc + } + + static void bgmac_dma_ring_desc_free(struct bgmac *bgmac, +- struct bgmac_dma_ring *ring) ++ struct bgmac_dma_ring *ring, ++ int num_slots) + { + struct device *dma_dev = bgmac->core->dma_dev; + int size; +@@ -569,7 +570,7 @@ static void bgmac_dma_ring_desc_free(str + return; + + /* Free ring of descriptors */ +- size = ring->num_slots * sizeof(struct bgmac_dma_desc); ++ size = num_slots * sizeof(struct bgmac_dma_desc); + dma_free_coherent(dma_dev, size, ring->cpu_base, + ring->dma_base); + } +@@ -590,10 +591,12 @@ static void bgmac_dma_free(struct bgmac + int i; + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) +- bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]); ++ bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i], ++ BGMAC_TX_RING_SLOTS); + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) +- bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i]); ++ bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i], ++ BGMAC_RX_RING_SLOTS); + } + + static int bgmac_dma_alloc(struct bgmac *bgmac) +@@ -616,11 +619,10 @@ static int bgmac_dma_alloc(struct bgmac + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { + ring = &bgmac->tx_ring[i]; +- ring->num_slots = BGMAC_TX_RING_SLOTS; + ring->mmio_base = ring_base[i]; + + /* Alloc ring of descriptors */ +- size = ring->num_slots * sizeof(struct bgmac_dma_desc); ++ size = BGMAC_TX_RING_SLOTS * sizeof(struct bgmac_dma_desc); + ring->cpu_base = dma_zalloc_coherent(dma_dev, size, + &ring->dma_base, + GFP_KERNEL); +@@ -642,11 +644,10 @@ static int bgmac_dma_alloc(struct bgmac + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { + ring = &bgmac->rx_ring[i]; +- ring->num_slots = BGMAC_RX_RING_SLOTS; + ring->mmio_base = ring_base[i]; + + /* Alloc ring of descriptors */ +- size = ring->num_slots * sizeof(struct bgmac_dma_desc); ++ size = BGMAC_RX_RING_SLOTS * sizeof(struct bgmac_dma_desc); + ring->cpu_base = dma_zalloc_coherent(dma_dev, size, + &ring->dma_base, + GFP_KERNEL); +@@ -709,7 +710,7 @@ static int bgmac_dma_init(struct bgmac * + + ring->start = 0; + ring->end = 0; +- for (j = 0; j < ring->num_slots; j++) { ++ for (j = 0; j < BGMAC_RX_RING_SLOTS; j++) { + err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]); + if (err) + goto error; +--- a/drivers/net/ethernet/broadcom/bgmac.h ++++ b/drivers/net/ethernet/broadcom/bgmac.h +@@ -419,11 +419,10 @@ struct bgmac_dma_ring { + u32 start; + u32 end; + +- u16 num_slots; +- u16 mmio_base; + struct bgmac_dma_desc *cpu_base; + dma_addr_t dma_base; + u32 index_base; /* Used for unaligned rings only, otherwise 0 */ ++ u16 mmio_base; + bool unaligned; + + struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS]; diff --git a/target/linux/generic/patches-4.0/072-13-bgmac-fix-MAC-soft-reset-bit-for-corerev-4.patch b/target/linux/generic/patches-4.0/072-13-bgmac-fix-MAC-soft-reset-bit-for-corerev-4.patch new file mode 100644 index 0000000000..a3d9fd6cd9 --- /dev/null +++ b/target/linux/generic/patches-4.0/072-13-bgmac-fix-MAC-soft-reset-bit-for-corerev-4.patch @@ -0,0 +1,24 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Mon, 13 Apr 2015 15:54:04 +0200 +Subject: [PATCH] bgmac: fix MAC soft-reset bit for corerev > 4 + +Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0 + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.h ++++ b/drivers/net/ethernet/broadcom/bgmac.h +@@ -198,9 +198,9 @@ + #define BGMAC_CMDCFG_TAI 0x00000200 + #define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */ + #define BGMAC_CMDCFG_HD_SHIFT 10 +-#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for other revs */ +-#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, only for core rev 4 */ +-#define BGMAC_CMDCFG_SR(rev) ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) ++#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for core rev 0-3 */ ++#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, for core rev >= 4 */ ++#define BGMAC_CMDCFG_SR(rev) ((rev >= 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) + #define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ + #define BGMAC_CMDCFG_AE 0x00400000 + #define BGMAC_CMDCFG_CFE 0x00800000 diff --git a/target/linux/generic/patches-4.0/072-14-bgmac-reset-all-4-GMAC-cores-on-init.patch b/target/linux/generic/patches-4.0/072-14-bgmac-reset-all-4-GMAC-cores-on-init.patch new file mode 100644 index 0000000000..2a913a60e7 --- /dev/null +++ b/target/linux/generic/patches-4.0/072-14-bgmac-reset-all-4-GMAC-cores-on-init.patch @@ -0,0 +1,28 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Mon, 13 Apr 2015 15:56:26 +0200 +Subject: [PATCH] bgmac: reset all 4 GMAC cores on init + +On a BCM4709 based device, I found that GMAC cores may be enabled at +probe time, but only become usable after a full reset. +Disable cores before re-enabling them to ensure that they are properly +reset. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -1623,8 +1623,11 @@ static int bgmac_probe(struct bcma_devic + ns_core = bcma_find_core_unit(core->bus, + BCMA_CORE_MAC_GBIT, + ns_gmac); +- if (ns_core && !bcma_core_is_enabled(ns_core)) +- bcma_core_enable(ns_core, 0); ++ if (!ns_core) ++ continue; ++ ++ bcma_core_disable(ns_core, 0); ++ bcma_core_enable(ns_core, 0); + } + } + diff --git a/target/linux/generic/patches-4.0/072-15-bgmac-fix-requests-for-extra-polling-calls-from-NAPI.patch b/target/linux/generic/patches-4.0/072-15-bgmac-fix-requests-for-extra-polling-calls-from-NAPI.patch new file mode 100644 index 0000000000..39cf048b9c --- /dev/null +++ b/target/linux/generic/patches-4.0/072-15-bgmac-fix-requests-for-extra-polling-calls-from-NAPI.patch @@ -0,0 +1,35 @@ +From 047f89922c6381432501f248d08226ff9adc4ee3 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Thu, 23 Apr 2015 20:45:25 +0200 +Subject: [PATCH][FIX 4.1] bgmac: fix requests for extra polling calls from + NAPI +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +After d75b1ade567f ("net: less interrupt masking in NAPI") polling +function has to return whole budget when it wants NAPI to call it again. + +Signed-off-by: Rafał Miłecki <zajec5@gmail.com> +Cc: Felix Fietkau <nbd@openwrt.org> +Fixes: eb64e2923a886 ("bgmac: leave interrupts disabled as long as there is work to do") +--- + drivers/net/ethernet/broadcom/bgmac.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c +index de77d3a..21e3c38 100644 +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -1260,7 +1260,7 @@ static int bgmac_poll(struct napi_struct *napi, int weight) + + /* Poll again if more events arrived in the meantime */ + if (bgmac_read(bgmac, BGMAC_INT_STATUS) & (BGMAC_IS_TX0 | BGMAC_IS_RX)) +- return handled; ++ return weight; + + if (handled < weight) { + napi_complete(napi); +-- +1.8.4.5 + |