aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch81
-rw-r--r--target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch22
-rw-r--r--target/linux/brcm47xx/patches-3.3/022-ssb-move-flash-to-chipcommon.patch12
-rw-r--r--target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch12
-rw-r--r--target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch14
-rw-r--r--target/linux/brcm47xx/patches-3.3/201-bcma-just-do-the-necessary-things-in-early-register.patch181
-rw-r--r--target/linux/brcm47xx/patches-3.3/202-bcma-init-sprom-struct-earlier.patch37
-rw-r--r--target/linux/brcm47xx/patches-3.3/203-bcma-use-fallback-sprom-if-sprom-on-card-was-not-val.patch15
-rw-r--r--target/linux/brcm47xx/patches-3.3/204-bcma-do-not-initialize-deactivated-PCIe-cores.patch26
-rw-r--r--target/linux/brcm47xx/patches-3.3/240-bcma-pcie-config-access.patch104
-rw-r--r--target/linux/brcm47xx/patches-3.3/280-activate_ssb_support_in_usb.patch2
-rw-r--r--target/linux/brcm47xx/patches-3.3/500-ssb-add-function-to-return-number-of-gpio-lines.patch2
-rw-r--r--target/linux/brcm47xx/patches-3.3/501-bcma-add-gpio-driver.patch132
-rw-r--r--target/linux/brcm47xx/patches-3.3/700-ssb-gigabit-ethernet-driver.patch37
-rw-r--r--target/linux/brcm47xx/patches-3.3/976-ssb_increase_pci_delay.patch2
-rw-r--r--target/linux/generic/config-3.32
-rw-r--r--target/linux/generic/patches-3.3/020-ssb_update.patch2122
-rw-r--r--target/linux/generic/patches-3.3/025-bcma_backport.patch2473
-rw-r--r--target/linux/generic/patches-3.3/026-bcma_pmu_regression.patch29
-rw-r--r--target/linux/generic/patches-3.3/027-bcma-add-missing-iounmap-on-error-path.patch55
-rw-r--r--target/linux/generic/patches-3.3/028-bcma-fix-regression-in-interrupt-assignment-on-mips.patch29
21 files changed, 4299 insertions, 1090 deletions
diff --git a/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch
index 98c855fbd8..a82577c2c8 100644
--- a/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch
+++ b/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch
@@ -12,7 +12,7 @@
break;
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
-@@ -189,6 +189,7 @@ static void bcma_core_mips_flash_detect(
+@@ -218,6 +218,7 @@ static void bcma_core_mips_flash_detect(
break;
case BCMA_CC_FLASHT_PARA:
bcma_info(bus, "found parallel flash.\n");
@@ -22,78 +22,9 @@
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -122,10 +122,68 @@
- #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
- #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
- #define BCMA_CC_FLASHCTL 0x0040
-+
-+/* Start/busy bit in flashcontrol */
-+#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff
-+#define BCMA_CC_FLASHCTL_ACTION 0x00000700
-+#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
- #define BCMA_CC_FLASHCTL_START 0x80000000
- #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
-+
-+/* flashcontrol action+opcodes for ST flashes */
-+#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
-+#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
-+#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
-+#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
-+#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
-+#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */
-+#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */
-+#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */
-+#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */
-+#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */
-+#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
-+#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
-+
-+
-+/* flashcontrol action+opcodes for Atmel flashes */
-+#define BCMA_CC_FLASHCTL_AT_READ 0x07e8
-+#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2
-+#define BCMA_CC_FLASHCTL_AT_BUF1_READ
-+#define BCMA_CC_FLASHCTL_AT_BUF2_READ
-+#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7
-+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384
-+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387
-+#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283
-+#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286
-+#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288
-+#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289
-+#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281
-+#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250
-+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
-+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
-+#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253
-+#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255
-+#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260
-+#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261
-+#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
-+#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
-+
- #define BCMA_CC_FLASHADDR 0x0044
- #define BCMA_CC_FLASHDATA 0x0048
-+
-+/* Status register bits for ST flashes */
-+#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
-+#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
-+#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
-+#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2
-+#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
-+
-+/* Status register bits for Atmel flashes */
-+#define BCMA_CC_FLASHDATA_AT_READY 0x80
-+#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40
-+#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38
-+#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3
-+
- #define BCMA_CC_BCAST_ADDR 0x0050
- #define BCMA_CC_BCAST_DATA 0x0054
- #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
-@@ -360,6 +418,12 @@
- /* 4313 Chip specific ChipControl register bits */
- #define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
+@@ -562,6 +562,12 @@
+ #define BCMA_RES_4314_HT_AVAIL BIT(28)
+ #define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
+#define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
+#define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
@@ -104,7 +35,7 @@
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
-@@ -369,6 +433,10 @@ struct bcma_chipcommon_pmu {
+@@ -571,6 +577,10 @@ struct bcma_chipcommon_pmu {
};
#ifdef CONFIG_BCMA_DRIVER_MIPS
@@ -115,7 +46,7 @@
struct bcma_pflash {
u8 buswidth;
u32 window;
-@@ -394,7 +462,10 @@ struct bcma_drv_cc {
+@@ -597,7 +607,10 @@ struct bcma_drv_cc {
u16 fast_pwrup_delay;
struct bcma_chipcommon_pmu pmu;
#ifdef CONFIG_BCMA_DRIVER_MIPS
diff --git a/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch
index 7382636b3d..9c0ce687a6 100644
--- a/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch
+++ b/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch
@@ -1,6 +1,6 @@
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -38,6 +38,11 @@ config BCMA_HOST_SOC
+@@ -39,6 +39,11 @@ config BCMA_HOST_SOC
bool
depends on BCMA_DRIVER_MIPS
@@ -23,9 +23,9 @@
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -51,6 +51,11 @@ void bcma_chipco_serial_init(struct bcma
- u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
- u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
+@@ -55,6 +55,11 @@ void bcma_chipco_serial_init(struct bcma
+ u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
+ u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
+#ifdef CONFIG_BCMA_SFLASH
+/* driver_chipcommon_sflash.c */
@@ -438,7 +438,7 @@
+}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
-@@ -185,7 +185,13 @@ static void bcma_core_mips_flash_detect(
+@@ -214,7 +214,13 @@ static void bcma_core_mips_flash_detect(
switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
case BCMA_CC_FLASHT_STSER:
case BCMA_CC_FLASHT_ATSER:
@@ -455,7 +455,7 @@
bcma_info(bus, "found parallel flash.\n");
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -435,6 +435,7 @@ struct bcma_chipcommon_pmu {
+@@ -579,6 +579,7 @@ struct bcma_chipcommon_pmu {
#ifdef CONFIG_BCMA_DRIVER_MIPS
enum bcma_flash_type {
BCMA_PFLASH,
@@ -463,7 +463,7 @@
};
struct bcma_pflash {
-@@ -443,6 +444,14 @@ struct bcma_pflash {
+@@ -587,6 +588,14 @@ struct bcma_pflash {
u32 window_size;
};
@@ -478,7 +478,7 @@
struct bcma_serial_port {
void *regs;
unsigned long clockspeed;
-@@ -465,6 +474,9 @@ struct bcma_drv_cc {
+@@ -610,6 +619,9 @@ struct bcma_drv_cc {
enum bcma_flash_type flash_type;
union {
struct bcma_pflash pflash;
@@ -488,9 +488,9 @@
};
int nr_serial_ports;
-@@ -520,4 +532,14 @@ extern void bcma_chipco_regctl_maskset(s
- u32 offset, u32 mask, u32 set);
- extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+@@ -680,4 +692,14 @@ extern void bcma_pmu_spuravoid_pllupdate
+
+ extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
+#ifdef CONFIG_BCMA_SFLASH
+/* Chipcommon sflash support. */
diff --git a/target/linux/brcm47xx/patches-3.3/022-ssb-move-flash-to-chipcommon.patch b/target/linux/brcm47xx/patches-3.3/022-ssb-move-flash-to-chipcommon.patch
index 12055bff03..4fa76e159e 100644
--- a/target/linux/brcm47xx/patches-3.3/022-ssb-move-flash-to-chipcommon.patch
+++ b/target/linux/brcm47xx/patches-3.3/022-ssb-move-flash-to-chipcommon.patch
@@ -63,11 +63,11 @@
struct ssb_bus *bus = mcore->dev->bus;
- mcore->flash_buswidth = 2;
-- if (bus->chipco.dev) {
+- if (ssb_chipco_available(&bus->chipco)) {
- mcore->flash_window = 0x1c000000;
- mcore->flash_window_size = 0x02000000;
+ /* When there is no chipcommon on the bus there is 4MB flash */
-+ if (!bus->chipco.dev) {
++ if (!ssb_chipco_available(&bus->chipco)) {
+ pr_info("found parallel flash.\n");
+ bus->chipco.flash_type = SSB_PFLASH;
+ bus->chipco.pflash.window = SSB_FLASH1;
@@ -104,7 +104,7 @@
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -582,6 +582,18 @@ struct ssb_chipcommon_pmu {
+@@ -583,6 +583,18 @@ struct ssb_chipcommon_pmu {
u32 crystalfreq; /* The active crystal frequency (in kHz) */
};
@@ -123,10 +123,10 @@
struct ssb_chipcommon {
struct ssb_device *dev;
u32 capabilities;
-@@ -589,6 +601,12 @@ struct ssb_chipcommon {
- /* Fast Powerup Delay constant */
- u16 fast_pwrup_delay;
+@@ -593,6 +605,12 @@ struct ssb_chipcommon {
struct ssb_chipcommon_pmu pmu;
+ u32 ticks_per_ms;
+ u32 max_timer_ms;
+#ifdef CONFIG_SSB_DRIVER_MIPS
+ enum ssb_flash_type flash_type;
+ union {
diff --git a/target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch b/target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch
index ba5a5c2d1b..7be794d7ba 100644
--- a/target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch
+++ b/target/linux/brcm47xx/patches-3.3/023-ssb-add-serial-flash-support.patch
@@ -495,7 +495,7 @@
pr_info("found parallel flash.\n");
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
-@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb
+@@ -204,6 +204,10 @@ extern int ssb_devices_freeze(struct ssb
extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
@@ -508,7 +508,7 @@
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -503,8 +503,10 @@
+@@ -504,8 +504,10 @@
#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
@@ -521,7 +521,7 @@
/* Status register bits for ST flashes */
#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
-@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu {
+@@ -586,6 +588,7 @@ struct ssb_chipcommon_pmu {
#ifdef CONFIG_SSB_DRIVER_MIPS
enum ssb_flash_type {
SSB_PFLASH,
@@ -529,7 +529,7 @@
};
struct ssb_pflash {
-@@ -592,6 +595,14 @@ struct ssb_pflash {
+@@ -593,6 +596,14 @@ struct ssb_pflash {
u32 window;
u32 window_size;
};
@@ -544,7 +544,7 @@
#endif /* CONFIG_SSB_DRIVER_MIPS */
struct ssb_chipcommon {
-@@ -605,6 +616,9 @@ struct ssb_chipcommon {
+@@ -609,6 +620,9 @@ struct ssb_chipcommon {
enum ssb_flash_type flash_type;
union {
struct ssb_pflash pflash;
@@ -554,7 +554,7 @@
};
#endif /* CONFIG_SSB_DRIVER_MIPS */
};
-@@ -666,6 +680,16 @@ extern int ssb_chipco_serial_init(struct
+@@ -671,6 +685,16 @@ extern int ssb_chipco_serial_init(struct
struct ssb_serial_port *ports);
#endif /* CONFIG_SSB_SERIAL */
diff --git a/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch b/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch
index 53f6e98d15..88f1fe021b 100644
--- a/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch
+++ b/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch
@@ -204,7 +204,7 @@
+extern struct bcm47xx_nflash bcm47xx_nflash;
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -43,6 +43,11 @@ config BCMA_SFLASH
+@@ -44,6 +44,11 @@ config BCMA_SFLASH
depends on BCMA_DRIVER_MIPS
default y
@@ -228,7 +228,7 @@
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -56,6 +56,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -60,6 +60,11 @@ u32 bcma_pmu_get_cpu_clock(struct bcma_d
int bcma_sflash_init(struct bcma_drv_cc *cc);
#endif /* CONFIG_BCMA_SFLASH */
@@ -407,7 +407,7 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -182,6 +183,17 @@ static void bcma_core_mips_flash_detect(
+@@ -211,6 +212,17 @@ static void bcma_core_mips_flash_detect(
{
struct bcma_bus *bus = mcore->core->bus;
@@ -960,7 +960,7 @@
+MODULE_DESCRIPTION("BCM47XX NAND flash driver");
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -436,6 +436,7 @@ struct bcma_chipcommon_pmu {
+@@ -580,6 +580,7 @@ struct bcma_chipcommon_pmu {
enum bcma_flash_type {
BCMA_PFLASH,
BCMA_SFLASH,
@@ -968,7 +968,7 @@
};
struct bcma_pflash {
-@@ -452,6 +453,14 @@ struct bcma_sflash {
+@@ -596,6 +597,14 @@ struct bcma_sflash {
};
#endif /* CONFIG_BCMA_SFLASH */
@@ -983,7 +983,7 @@
struct bcma_serial_port {
void *regs;
unsigned long clockspeed;
-@@ -477,6 +486,9 @@ struct bcma_drv_cc {
+@@ -622,6 +631,9 @@ struct bcma_drv_cc {
#ifdef CONFIG_BCMA_SFLASH
struct bcma_sflash sflash;
#endif /* CONFIG_BCMA_SFLASH */
@@ -993,7 +993,7 @@
};
int nr_serial_ports;
-@@ -542,4 +554,13 @@ int bcma_sflash_write(struct bcma_drv_cc
+@@ -702,4 +714,13 @@ int bcma_sflash_write(struct bcma_drv_cc
int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset);
#endif /* CONFIG_BCMA_SFLASH */
diff --git a/target/linux/brcm47xx/patches-3.3/201-bcma-just-do-the-necessary-things-in-early-register.patch b/target/linux/brcm47xx/patches-3.3/201-bcma-just-do-the-necessary-things-in-early-register.patch
deleted file mode 100644
index 6ef5ecd51d..0000000000
--- a/target/linux/brcm47xx/patches-3.3/201-bcma-just-do-the-necessary-things-in-early-register.patch
+++ /dev/null
@@ -1,181 +0,0 @@
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -22,12 +22,9 @@ static inline u32 bcma_cc_write32_masked
- return value;
- }
-
--void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
-+void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
- {
-- u32 leddc_on = 10;
-- u32 leddc_off = 90;
--
-- if (cc->setup_done)
-+ if (cc->early_setup_done)
- return;
-
- if (cc->core->id.rev >= 11)
-@@ -36,6 +33,22 @@ void bcma_core_chipcommon_init(struct bc
- if (cc->core->id.rev >= 35)
- cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
-
-+ if (cc->capabilities & BCMA_CC_CAP_PMU)
-+ bcma_pmu_early_init(cc);
-+
-+ cc->early_setup_done = true;
-+}
-+
-+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
-+{
-+ u32 leddc_on = 10;
-+ u32 leddc_off = 90;
-+
-+ if (cc->setup_done)
-+ return;
-+
-+ bcma_core_chipcommon_early_init(cc);
-+
- if (cc->core->id.rev >= 20) {
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -141,7 +141,7 @@ void bcma_pmu_workarounds(struct bcma_dr
- }
- }
-
--void bcma_pmu_init(struct bcma_drv_cc *cc)
-+void bcma_pmu_early_init(struct bcma_drv_cc *cc)
- {
- u32 pmucap;
-
-@@ -150,7 +150,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c
-
- bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
- cc->pmu.rev, pmucap);
-+}
-
-+void bcma_pmu_init(struct bcma_drv_cc *cc)
-+{
- if (cc->pmu.rev == 1)
- bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
- ~BCMA_CC_PMU_CTL_NOILPONW);
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -222,16 +222,33 @@ static void bcma_core_mips_flash_detect(
- }
- }
-
-+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
-+{
-+ struct bcma_bus *bus = mcore->core->bus;
-+
-+ if (mcore->early_setup_done)
-+ return;
-+
-+ bcma_chipco_serial_init(&bus->drv_cc);
-+ bcma_core_mips_flash_detect(mcore);
-+
-+ mcore->early_setup_done = true;
-+}
-+
- void bcma_core_mips_init(struct bcma_drv_mips *mcore)
- {
- struct bcma_bus *bus;
- struct bcma_device *core;
- bus = mcore->core->bus;
-
-+ if (mcore->setup_done)
-+ return;
-+
- bcma_info(bus, "Initializing MIPS core...\n");
-
-- if (!mcore->setup_done)
-- mcore->assigned_irqs = 1;
-+ bcma_core_mips_early_init(mcore);
-+
-+ mcore->assigned_irqs = 1;
-
- /* Assign IRQs to all cores on the bus */
- list_for_each_entry(core, &bus->cores, list) {
-@@ -266,10 +283,5 @@ void bcma_core_mips_init(struct bcma_drv
- bcma_info(bus, "IRQ reconfiguration done\n");
- bcma_core_mips_dump_irq(bus);
-
-- if (mcore->setup_done)
-- return;
--
-- bcma_chipco_serial_init(&bus->drv_cc);
-- bcma_core_mips_flash_detect(mcore);
- mcore->setup_done = true;
- }
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -247,18 +247,18 @@ int __init bcma_bus_early_register(struc
- return -1;
- }
-
-- /* Init CC core */
-+ /* Early init CC core */
- core = bcma_find_core(bus, bcma_cc_core_id(bus));
- if (core) {
- bus->drv_cc.core = core;
-- bcma_core_chipcommon_init(&bus->drv_cc);
-+ bcma_core_chipcommon_early_init(&bus->drv_cc);
- }
-
-- /* Init MIPS core */
-+ /* Early init MIPS core */
- core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
- if (core) {
- bus->drv_mips.core = core;
-- bcma_core_mips_init(&bus->drv_mips);
-+ bcma_core_mips_early_init(&bus->drv_mips);
- }
-
- bcma_info(bus, "Early bus registered\n");
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -476,6 +476,7 @@ struct bcma_drv_cc {
- u32 capabilities;
- u32 capabilities_ext;
- u8 setup_done:1;
-+ u8 early_setup_done:1;
- /* Fast Powerup Delay constant */
- u16 fast_pwrup_delay;
- struct bcma_chipcommon_pmu pmu;
-@@ -510,6 +511,7 @@ struct bcma_drv_cc {
- bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
-
- extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
-+extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
-
- extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
- extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
-@@ -533,6 +535,7 @@ u32 bcma_chipco_gpio_polarity(struct bcm
-
- /* PMU support */
- extern void bcma_pmu_init(struct bcma_drv_cc *cc);
-+extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
-
- extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
- u32 value);
---- a/include/linux/bcma/bcma_driver_mips.h
-+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -35,13 +35,16 @@ struct bcma_device;
- struct bcma_drv_mips {
- struct bcma_device *core;
- u8 setup_done:1;
-+ u8 early_setup_done:1;
- unsigned int assigned_irqs;
- };
-
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
-+extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
- #else
- static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
-+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
- #endif
-
- extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
diff --git a/target/linux/brcm47xx/patches-3.3/202-bcma-init-sprom-struct-earlier.patch b/target/linux/brcm47xx/patches-3.3/202-bcma-init-sprom-struct-earlier.patch
deleted file mode 100644
index 03540f04cc..0000000000
--- a/target/linux/brcm47xx/patches-3.3/202-bcma-init-sprom-struct-earlier.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -165,6 +165,20 @@ int __devinit bcma_bus_register(struct b
- return -1;
- }
-
-+ /* Early init CC core */
-+ core = bcma_find_core(bus, bcma_cc_core_id(bus));
-+ if (core) {
-+ bus->drv_cc.core = core;
-+ bcma_core_chipcommon_early_init(&bus->drv_cc);
-+ }
-+
-+ /* Try to get SPROM */
-+ err = bcma_sprom_get(bus);
-+ if (err == -ENOENT) {
-+ bcma_err(bus, "No SPROM available\n");
-+ } else if (err)
-+ bcma_err(bus, "Failed to get SPROM: %d\n", err);
-+
- /* Init CC core */
- core = bcma_find_core(bus, bcma_cc_core_id(bus));
- if (core) {
-@@ -193,13 +207,6 @@ int __devinit bcma_bus_register(struct b
- bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
- }
-
-- /* Try to get SPROM */
-- err = bcma_sprom_get(bus);
-- if (err == -ENOENT) {
-- bcma_err(bus, "No SPROM available\n");
-- } else if (err)
-- bcma_err(bus, "Failed to get SPROM: %d\n", err);
--
- /* Register found cores */
- bcma_register_cores(bus);
-
diff --git a/target/linux/brcm47xx/patches-3.3/203-bcma-use-fallback-sprom-if-sprom-on-card-was-not-val.patch b/target/linux/brcm47xx/patches-3.3/203-bcma-use-fallback-sprom-if-sprom-on-card-was-not-val.patch
deleted file mode 100644
index b6e6480567..0000000000
--- a/target/linux/brcm47xx/patches-3.3/203-bcma-use-fallback-sprom-if-sprom-on-card-was-not-val.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -591,8 +591,11 @@ int bcma_sprom_get(struct bcma_bus *bus)
- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
-
- err = bcma_sprom_valid(sprom);
-- if (err)
-+ if (err) {
-+ bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
-+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
- goto out;
-+ }
-
- bcma_sprom_extract_r8(bus, sprom);
-
diff --git a/target/linux/brcm47xx/patches-3.3/204-bcma-do-not-initialize-deactivated-PCIe-cores.patch b/target/linux/brcm47xx/patches-3.3/204-bcma-do-not-initialize-deactivated-PCIe-cores.patch
deleted file mode 100644
index 302ac8d954..0000000000
--- a/target/linux/brcm47xx/patches-3.3/204-bcma-do-not-initialize-deactivated-PCIe-cores.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/bcma/driver_pci_host.c
-+++ b/drivers/bcma/driver_pci_host.c
-@@ -35,11 +35,6 @@ bool __devinit bcma_core_pci_is_in_hostm
- chipid_top != 0x5300)
- return false;
-
-- if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
-- bcma_info(bus, "This PCI core is disabled and not working\n");
-- return false;
-- }
--
- bcma_core_enable(pc->core, 0);
-
- return !mips_busprobe32(tmp, pc->core->io_addr);
-@@ -396,6 +391,11 @@ void __devinit bcma_core_pci_hostmode_in
-
- bcma_info(bus, "PCIEcore in host mode found\n");
-
-+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
-+ bcma_info(bus, "This PCIE core is disabled and not working\n");
-+ return;
-+ }
-+
- pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
- if (!pc_host) {
- bcma_err(bus, "can not allocate memory");
diff --git a/target/linux/brcm47xx/patches-3.3/240-bcma-pcie-config-access.patch b/target/linux/brcm47xx/patches-3.3/240-bcma-pcie-config-access.patch
deleted file mode 100644
index 91b8a4191c..0000000000
--- a/target/linux/brcm47xx/patches-3.3/240-bcma-pcie-config-access.patch
+++ /dev/null
@@ -1,104 +0,0 @@
---- a/drivers/bcma/driver_pci_host.c
-+++ b/drivers/bcma/driver_pci_host.c
-@@ -94,19 +94,19 @@ static int bcma_extpci_read_config(struc
- if (dev == 0) {
- /* we support only two functions on device 0 */
- if (func > 1)
-- return -EINVAL;
-+ goto out;
-
- /* accesses to config registers with offsets >= 256
- * requires indirect access.
- */
- if (off >= PCI_CONFIG_SPACE_SIZE) {
- addr = (func << 12);
-- addr |= (off & 0x0FFF);
-+ addr |= (off & 0x0FFC);
- val = bcma_pcie_read_config(pc, addr);
- } else {
- addr = BCMA_CORE_PCI_PCICFG0;
- addr |= (func << 8);
-- addr |= (off & 0xfc);
-+ addr |= (off & 0xFC);
- val = pcicore_read32(pc, addr);
- }
- } else {
-@@ -122,8 +122,6 @@ static int bcma_extpci_read_config(struc
- val = 0xffffffff;
- goto unmap;
- }
--
-- val = readl(mmio);
- }
- val >>= (8 * (off & 3));
-
-@@ -151,7 +149,7 @@ static int bcma_extpci_write_config(stru
- const void *buf, int len)
- {
- int err = -EINVAL;
-- u32 addr = 0, val = 0;
-+ u32 addr, val;
- void __iomem *mmio = 0;
- u16 chipid = pc->core->bus->chipinfo.id;
-
-@@ -159,16 +157,22 @@ static int bcma_extpci_write_config(stru
- if (unlikely(len != 1 && len != 2 && len != 4))
- goto out;
- if (dev == 0) {
-+ /* we support only two functions on device 0 */
-+ if (func > 1)
-+ goto out;
-+
- /* accesses to config registers with offsets >= 256
- * requires indirect access.
- */
-- if (off < PCI_CONFIG_SPACE_SIZE) {
-- addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
-+ if (off >= PCI_CONFIG_SPACE_SIZE) {
-+ addr = (func << 12);
-+ addr |= (off & 0x0FFC);
-+ val = bcma_pcie_read_config(pc, addr);
-+ } else {
-+ addr = BCMA_CORE_PCI_PCICFG0;
- addr |= (func << 8);
-- addr |= (off & 0xfc);
-- mmio = ioremap_nocache(addr, sizeof(val));
-- if (!mmio)
-- goto out;
-+ addr |= (off & 0xFC);
-+ val = pcicore_read32(pc, addr);
- }
- } else {
- addr = bcma_get_cfgspace_addr(pc, dev, func, off);
-@@ -187,12 +191,10 @@ static int bcma_extpci_write_config(stru
-
- switch (len) {
- case 1:
-- val = readl(mmio);
- val &= ~(0xFF << (8 * (off & 3)));
- val |= *((const u8 *)buf) << (8 * (off & 3));
- break;
- case 2:
-- val = readl(mmio);
- val &= ~(0xFFFF << (8 * (off & 3)));
- val |= *((const u16 *)buf) << (8 * (off & 3));
- break;
-@@ -200,13 +202,14 @@ static int bcma_extpci_write_config(stru
- val = *((const u32 *)buf);
- break;
- }
-- if (dev == 0 && !addr) {
-+ if (dev == 0) {
- /* accesses to config registers with offsets >= 256
- * requires indirect access.
- */
-- addr = (func << 12);
-- addr |= (off & 0x0FFF);
-- bcma_pcie_write_config(pc, addr, val);
-+ if (off >= PCI_CONFIG_SPACE_SIZE)
-+ bcma_pcie_write_config(pc, addr, val);
-+ else
-+ pcicore_write32(pc, addr, val);
- } else {
- writel(val, mmio);
-
diff --git a/target/linux/brcm47xx/patches-3.3/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.3/280-activate_ssb_support_in_usb.patch
index c535c05db5..8741109cd2 100644
--- a/target/linux/brcm47xx/patches-3.3/280-activate_ssb_support_in_usb.patch
+++ b/target/linux/brcm47xx/patches-3.3/280-activate_ssb_support_in_usb.patch
@@ -5,7 +5,7 @@ This prevents the options from being delete with make kernel_oldconfig.
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
+@@ -38,6 +38,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
config BCMA_HOST_SOC
bool
depends on BCMA_DRIVER_MIPS
diff --git a/target/linux/brcm47xx/patches-3.3/500-ssb-add-function-to-return-number-of-gpio-lines.patch b/target/linux/brcm47xx/patches-3.3/500-ssb-add-function-to-return-number-of-gpio-lines.patch
index f1b483e4a4..5013351e16 100644
--- a/target/linux/brcm47xx/patches-3.3/500-ssb-add-function-to-return-number-of-gpio-lines.patch
+++ b/target/linux/brcm47xx/patches-3.3/500-ssb-add-function-to-return-number-of-gpio-lines.patch
@@ -1,6 +1,6 @@
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
-@@ -136,6 +136,18 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
+@@ -170,6 +170,18 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
}
EXPORT_SYMBOL(ssb_gpio_polarity);
diff --git a/target/linux/brcm47xx/patches-3.3/501-bcma-add-gpio-driver.patch b/target/linux/brcm47xx/patches-3.3/501-bcma-add-gpio-driver.patch
index 951c6d40e9..7c4323e452 100644
--- a/target/linux/brcm47xx/patches-3.3/501-bcma-add-gpio-driver.patch
+++ b/target/linux/brcm47xx/patches-3.3/501-bcma-add-gpio-driver.patch
@@ -1,136 +1,18 @@
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -70,6 +70,8 @@ void bcma_core_chipcommon_init(struct bc
- (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
- }
-
-+ spin_lock_init(&cc->gpio_lock);
-+
- cc->setup_done = true;
- }
-
-@@ -92,34 +94,81 @@ u32 bcma_chipco_irq_status(struct bcma_d
-
- u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
- {
-- return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
-+ unsigned long flags;
-+ u32 res;
-+
-+ spin_lock_irqsave(&cc->gpio_lock, flags);
-+ res = bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
-+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
-+
-+ return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in);
-
- u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
-+ unsigned long flags;
-+ u32 res;
-+
-+ spin_lock_irqsave(&cc->gpio_lock, flags);
-+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
-+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
-+
-+ return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
-
- u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
-+ unsigned long flags;
-+ u32 res;
-+
-+ spin_lock_irqsave(&cc->gpio_lock, flags);
-+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
-+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
-+
-+ return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
-
- u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
-+ unsigned long flags;
-+ u32 res;
-+
-+ spin_lock_irqsave(&cc->gpio_lock, flags);
-+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
-+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
-+
-+ return res;
- }
- EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
-
- u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
-+ unsigned long flags;
-+ u32 res;
-+
-+ spin_lock_irqsave(&cc->gpio_lock, flags);
-+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
-+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
-+
-+ return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask);
-
- u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
-+ unsigned long flags;
-+ u32 res;
-+
-+ spin_lock_irqsave(&cc->gpio_lock, flags);
-+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
-+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
-+
-+ return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity);
-
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -495,6 +495,9 @@ struct bcma_drv_cc {
- int nr_serial_ports;
- struct bcma_serial_port serial_ports[4];
- #endif /* CONFIG_BCMA_DRIVER_MIPS */
-+
-+ /* Lock for GPIO register access. */
-+ spinlock_t gpio_lock;
- };
-
- /* Register access */
-@@ -525,13 +528,22 @@ void bcma_chipco_irq_mask(struct bcma_dr
+@@ -678,6 +678,8 @@ void bcma_chipco_irq_mask(struct bcma_dr
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+#define BCMA_CC_GPIO_LINES 16
+
/* Chipcommon GPIO pin access. */
--u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
--u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
--u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
--u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
--u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
--u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
-+extern u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
-+extern u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
-+extern u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
-+extern u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask,
-+ u32 value);
-+extern u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask,
-+ u32 value);
-+extern u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask,
-+ u32 value);
+ u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+ u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+@@ -687,6 +689,10 @@ u32 bcma_chipco_gpio_intmask(struct bcma
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
+static inline int bcma_chipco_gpio_count(void)
+{
+ return BCMA_CC_GPIO_LINES;
diff --git a/target/linux/brcm47xx/patches-3.3/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-3.3/700-ssb-gigabit-ethernet-driver.patch
index e40a621c0d..d9968d29eb 100644
--- a/target/linux/brcm47xx/patches-3.3/700-ssb-gigabit-ethernet-driver.patch
+++ b/target/linux/brcm47xx/patches-3.3/700-ssb-gigabit-ethernet-driver.patch
@@ -400,40 +400,3 @@
#define PCI_DEVICE_ID_TIGON3_5751 0x1677
#define PCI_DEVICE_ID_TIGON3_5715 0x1678
#define PCI_DEVICE_ID_TIGON3_5715S 0x1679
---- a/include/linux/ssb/ssb_driver_gige.h
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -97,21 +97,12 @@ static inline bool ssb_gige_must_flush_p
- return 0;
- }
-
--#ifdef CONFIG_BCM47XX
--#include <asm/mach-bcm47xx/nvram.h>
--/* Get the device MAC address */
--static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
--{
-- char buf[20];
-- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
-- return;
-- nvram_parse_macaddr(buf, macaddr);
--}
--#else
- static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
- {
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+
-+ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
- }
--#endif
-
- extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
- struct pci_dev *pdev);
-@@ -175,6 +166,9 @@ static inline bool ssb_gige_must_flush_p
- {
- return 0;
- }
-+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+{
-+}
-
- #endif /* CONFIG_SSB_DRIVER_GIGE */
- #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
diff --git a/target/linux/brcm47xx/patches-3.3/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.3/976-ssb_increase_pci_delay.patch
index eb70c81e65..0650c25683 100644
--- a/target/linux/brcm47xx/patches-3.3/976-ssb_increase_pci_delay.patch
+++ b/target/linux/brcm47xx/patches-3.3/976-ssb_increase_pci_delay.patch
@@ -1,6 +1,6 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
-@@ -376,7 +376,7 @@ static void __devinit ssb_pcicore_init_h
+@@ -375,7 +375,7 @@ static void __devinit ssb_pcicore_init_h
set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
diff --git a/target/linux/generic/config-3.3 b/target/linux/generic/config-3.3
index 9c7d9461e0..4f18587ca9 100644
--- a/target/linux/generic/config-3.3
+++ b/target/linux/generic/config-3.3
@@ -193,6 +193,7 @@ CONFIG_BASE_SMALL=0
# CONFIG_BCM63XX is not set
# CONFIG_BCM63XX_PHY is not set
# CONFIG_BCMA is not set
+# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BE2ISCSI is not set
@@ -2842,6 +2843,7 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZLIB is not set
# CONFIG_SSB is not set
+# CONFIG_SSB_DRIVER_GPIO is not set
# CONFIG_SSB_DEBUG is not set
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_POSSIBLE=y
diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch
index e427574f77..8499e8188d 100644
--- a/target/linux/generic/patches-3.3/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.3/020-ssb_update.patch
@@ -1,6 +1,31 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -160,4 +160,12 @@ config SSB_DRIVER_GIGE
+
+ If unsure, say N
+
++config SSB_DRIVER_GPIO
++ bool "SSB GPIO driver"
++ depends on SSB && GPIOLIB
++ help
++ Driver to provide access to the GPIO pins on the bus.
++
++ If unsure, say N
++
+ endmenu
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
+@@ -15,6 +15,7 @@ ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver
+ ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
+ ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
+ ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o
++ssb-$(CONFIG_SSB_DRIVER_GPIO) += driver_gpio.o
+
+ # b43 pci-ssb-bridge driver
+ # Not strictly a part of SSB, but kept here for convenience
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
-@@ -29,11 +29,14 @@ static const struct pci_device_id b43_pc
+@@ -29,11 +29,15 @@ static const struct pci_device_id b43_pc
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
@@ -12,9 +37,265 @@
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432c) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4350) },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -4,6 +4,7 @@
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -12,6 +13,7 @@
+ #include <linux/ssb/ssb_regs.h>
+ #include <linux/export.h>
+ #include <linux/pci.h>
++#include <linux/bcm47xx_wdt.h>
+
+ #include "ssb_private.h"
+
+@@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru
+ cc->fast_pwrup_delay = tmp;
+ }
+
++static u32 ssb_chipco_alp_clock(struct ssb_chipcommon *cc)
++{
++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
++ return ssb_pmu_get_alp_clock(cc);
++
++ return 20000000;
++}
++
++static u32 ssb_chipco_watchdog_get_max_timer(struct ssb_chipcommon *cc)
++{
++ u32 nb;
++
++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++ if (cc->dev->id.revision < 26)
++ nb = 16;
++ else
++ nb = (cc->dev->id.revision >= 37) ? 32 : 24;
++ } else {
++ nb = 28;
++ }
++ if (nb == 32)
++ return 0xffffffff;
++ else
++ return (1 << nb) - 1;
++}
++
++u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks)
++{
++ struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt);
++
++ if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB)
++ return 0;
++
++ return ssb_chipco_watchdog_timer_set(cc, ticks);
++}
++
++u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms)
++{
++ struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt);
++ u32 ticks;
++
++ if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB)
++ return 0;
++
++ ticks = ssb_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
++ return ticks / cc->ticks_per_ms;
++}
++
++static int ssb_chipco_watchdog_ticks_per_ms(struct ssb_chipcommon *cc)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++
++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++ /* based on 32KHz ILP clock */
++ return 32;
++ } else {
++ if (cc->dev->id.revision < 18)
++ return ssb_clockspeed(bus) / 1000;
++ else
++ return ssb_chipco_alp_clock(cc) / 1000;
++ }
++}
++
+ void ssb_chipcommon_init(struct ssb_chipcommon *cc)
+ {
+ if (!cc->dev)
+ return; /* We don't have a ChipCommon */
++
++ spin_lock_init(&cc->gpio_lock);
++
+ if (cc->dev->id.revision >= 11)
+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+@@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip
+ chipco_powercontrol_init(cc);
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+ calc_fast_powerup_delay(cc);
++
++ if (cc->dev->bus->bustype == SSB_BUSTYPE_SSB) {
++ cc->ticks_per_ms = ssb_chipco_watchdog_ticks_per_ms(cc);
++ cc->max_timer_ms = ssb_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
++ }
+ }
+
+ void ssb_chipco_suspend(struct ssb_chipcommon *cc)
+@@ -395,10 +468,27 @@ void ssb_chipco_timing_init(struct ssb_c
+ }
+
+ /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+-void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
++u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
+ {
+- /* instant NMI */
+- chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
++ u32 maxt;
++ enum ssb_clkmode clkmode;
++
++ maxt = ssb_chipco_watchdog_get_max_timer(cc);
++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++ if (ticks == 1)
++ ticks = 2;
++ else if (ticks > maxt)
++ ticks = maxt;
++ chipco_write32(cc, SSB_CHIPCO_PMU_WATCHDOG, ticks);
++ } else {
++ clkmode = ticks ? SSB_CLKMODE_FAST : SSB_CLKMODE_DYNAMIC;
++ ssb_chipco_set_clockmode(cc, clkmode);
++ if (ticks > maxt)
++ ticks = maxt;
++ /* instant NMI */
++ chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
++ }
++ return ticks;
+ }
+
+ void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+@@ -418,28 +508,93 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco
+
+ u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+ EXPORT_SYMBOL(ssb_chipco_gpio_control);
+
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res = 0;
++
++ if (cc->dev->id.revision < 20)
++ return 0xffffffff;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLUP, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res = 0;
++
++ if (cc->dev->id.revision < 20)
++ return 0xffffffff;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLDOWN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ #ifdef CONFIG_SSB_SERIAL
+@@ -473,12 +628,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLK0);
+ } else if ((ccrev >= 11) && (ccrev != 15)) {
+- /* Fixed ALP clock */
+- baud_base = 20000000;
+- if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+- /* FIXME: baud_base is different for devices with a PMU */
+- SSB_WARN_ON(1);
+- }
++ baud_base = ssb_chipco_alp_clock(cc);
+ div = 1;
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -13,6 +13,9 @@
@@ -22,7 +303,7 @@
#include <linux/delay.h>
#include <linux/export.h>
+#ifdef CONFIG_BCM47XX
-+#include <asm/mach-bcm47xx/nvram.h>
++#include <nvram.h>
+#endif
#include "ssb_private.h"
@@ -38,6 +319,46 @@
if (crystalfreq)
e = pmu0_plltab_find_entry(crystalfreq);
if (!e)
+@@ -111,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -139,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set PDIV in PLL control 0. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -250,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -276,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set p1div and p2div. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_
u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
@@ -63,11 +384,83 @@
ssb_pmu0_pllinit_r0(cc, crystalfreq);
break;
case 0x4322:
-@@ -607,3 +614,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+@@ -339,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
+ }
+ break;
++ case 43222:
++ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PLL init unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PLL init unknown for device %04X\n",
++ bus->chip_id);
+ }
+ }
+
+@@ -427,6 +435,7 @@ static void ssb_pmu_resources_init(struc
+ min_msk = 0xCBB;
+ break;
+ case 0x4322:
++ case 43222:
+ /* We keep the default settings:
+ * min_msk = 0xCBB
+ * max_msk = 0x7FFFF
+@@ -462,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ max_msk = 0xFFFFF;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU resource config unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++ bus->chip_id);
+ }
+
+ if (updown_tab) {
+@@ -516,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+- cc->pmu.rev, pmucap);
++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -607,3 +615,102 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+
++static u32 ssb_pmu_get_alp_clock_clk0(struct ssb_chipcommon *cc)
++{
++ u32 crystalfreq;
++ const struct pmu0_plltab_entry *e = NULL;
++
++ crystalfreq = chipco_read32(cc, SSB_CHIPCO_PMU_CTL) &
++ SSB_CHIPCO_PMU_CTL_XTALFREQ >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT;
++ e = pmu0_plltab_find_entry(crystalfreq);
++ BUG_ON(!e);
++ return e->freq * 1000;
++}
++
++u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++
++ switch (bus->chip_id) {
++ case 0x5354:
++ ssb_pmu_get_alp_clock_clk0(cc);
++ default:
++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++ bus->chip_id);
++ return 0;
++ }
++}
++
+u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
@@ -77,9 +470,8 @@
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU cpu clock unknown for device %04X\n",
-+ bus->chip_id);
++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+}
@@ -92,27 +484,596 @@
+ case 0x5354:
+ return 120000000;
+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU controlclock unknown for device %04X\n",
-+ bus->chip_id);
++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+}
++
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
++{
++ u32 pmu_ctl = 0;
++
++ switch (cc->dev->bus->chip_id) {
++ case 0x4322:
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
++ if (spuravoid == 1)
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
++ else
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
++ case 43222:
++ if (spuravoid == 1) {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++ } else {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++ }
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
++ default:
++ ssb_printk(KERN_ERR PFX
++ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++ cc->dev->bus->chip_id);
++ return;
++ }
++
++ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
++}
++EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
+--- a/drivers/ssb/driver_extif.c
++++ b/drivers/ssb/driver_extif.c
+@@ -112,10 +112,37 @@ void ssb_extif_get_clockcontrol(struct s
+ *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
+ }
+
+-void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+- u32 ticks)
++u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks)
+ {
++ struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);
++
++ return ssb_extif_watchdog_timer_set(extif, ticks);
++}
++
++u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms)
++{
++ struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);
++ u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms;
++
++ ticks = ssb_extif_watchdog_timer_set(extif, ticks);
++
++ return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK;
++}
++
++u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks)
++{
++ if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER)
++ ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER;
+ extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
++
++ return ticks;
++}
++
++void ssb_extif_init(struct ssb_extif *extif)
++{
++ if (!extif->dev)
++ return; /* We don't have a Extif core */
++ spin_lock_init(&extif->gpio_lock);
+ }
+
+ u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
+@@ -125,22 +152,50 @@ u32 ssb_extif_gpio_in(struct ssb_extif *
+
+ u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
+ {
+- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&extif->gpio_lock, flags);
++ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
+ mask, value);
++ spin_unlock_irqrestore(&extif->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
+ {
+- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&extif->gpio_lock, flags);
++ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
+ mask, value);
++ spin_unlock_irqrestore(&extif->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
+ {
+- return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&extif->gpio_lock, flags);
++ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
++ spin_unlock_irqrestore(&extif->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
+ {
+- return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
++ unsigned long flags;
++ u32 res = 0;
++
++ spin_lock_irqsave(&extif->gpio_lock, flags);
++ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
++ spin_unlock_irqrestore(&extif->gpio_lock, flags);
++
++ return res;
+ }
+--- /dev/null
++++ b/drivers/ssb/driver_gpio.c
+@@ -0,0 +1,210 @@
++/*
++ * Sonics Silicon Backplane
++ * GPIO driver
++ *
++ * Copyright 2011, Broadcom Corporation
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/gpio.h>
++#include <linux/export.h>
++#include <linux/ssb/ssb.h>
++
++#include "ssb_private.h"
++
++static struct ssb_bus *ssb_gpio_get_bus(struct gpio_chip *chip)
++{
++ return container_of(chip, struct ssb_bus, gpio);
++}
++
++static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ return !!ssb_chipco_gpio_in(&bus->chipco, 1 << gpio);
++}
++
++static void ssb_gpio_chipco_set_value(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int ssb_gpio_chipco_direction_input(struct gpio_chip *chip,
++ unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 0);
++ return 0;
++}
++
++static int ssb_gpio_chipco_direction_output(struct gpio_chip *chip,
++ unsigned gpio, int value)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 1 << gpio);
++ ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0);
++ return 0;
++}
++
++static int ssb_gpio_chipco_request(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ ssb_chipco_gpio_control(&bus->chipco, 1 << gpio, 0);
++ /* clear pulldown */
++ ssb_chipco_gpio_pulldown(&bus->chipco, 1 << gpio, 0);
++ /* Set pullup */
++ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 1 << gpio);
++
++ return 0;
++}
++
++static void ssb_gpio_chipco_free(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ /* clear pullup */
++ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
++}
++
++static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->chipco.dev) + 2;
++ else
++ return -EINVAL;
++}
++
++static int ssb_gpio_chipco_init(struct ssb_bus *bus)
++{
++ struct gpio_chip *chip = &bus->gpio;
++
++ chip->label = "ssb_chipco_gpio";
++ chip->owner = THIS_MODULE;
++ chip->request = ssb_gpio_chipco_request;
++ chip->free = ssb_gpio_chipco_free;
++ chip->get = ssb_gpio_chipco_get_value;
++ chip->set = ssb_gpio_chipco_set_value;
++ chip->direction_input = ssb_gpio_chipco_direction_input;
++ chip->direction_output = ssb_gpio_chipco_direction_output;
++ chip->to_irq = ssb_gpio_chipco_to_irq;
++ chip->ngpio = 16;
++ /* There is just one SoC in one device and its GPIO addresses should be
++ * deterministic to address them more easily. The other buses could get
++ * a random base number. */
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ chip->base = 0;
++ else
++ chip->base = -1;
++
++ return gpiochip_add(chip);
++}
++
++#ifdef CONFIG_SSB_DRIVER_EXTIF
++
++static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ return !!ssb_extif_gpio_in(&bus->extif, 1 << gpio);
++}
++
++static void ssb_gpio_extif_set_value(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int ssb_gpio_extif_direction_input(struct gpio_chip *chip,
++ unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 0);
++ return 0;
++}
++
++static int ssb_gpio_extif_direction_output(struct gpio_chip *chip,
++ unsigned gpio, int value)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 1 << gpio);
++ ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0);
++ return 0;
++}
++
++static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->extif.dev) + 2;
++ else
++ return -EINVAL;
++}
++
++static int ssb_gpio_extif_init(struct ssb_bus *bus)
++{
++ struct gpio_chip *chip = &bus->gpio;
++
++ chip->label = "ssb_extif_gpio";
++ chip->owner = THIS_MODULE;
++ chip->get = ssb_gpio_extif_get_value;
++ chip->set = ssb_gpio_extif_set_value;
++ chip->direction_input = ssb_gpio_extif_direction_input;
++ chip->direction_output = ssb_gpio_extif_direction_output;
++ chip->to_irq = ssb_gpio_extif_to_irq;
++ chip->ngpio = 5;
++ /* There is just one SoC in one device and its GPIO addresses should be
++ * deterministic to address them more easily. The other buses could get
++ * a random base number. */
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ chip->base = 0;
++ else
++ chip->base = -1;
++
++ return gpiochip_add(chip);
++}
++
++#else
++static int ssb_gpio_extif_init(struct ssb_bus *bus)
++{
++ return -ENOTSUPP;
++}
++#endif
++
++int ssb_gpio_init(struct ssb_bus *bus)
++{
++ if (ssb_chipco_available(&bus->chipco))
++ return ssb_gpio_chipco_init(bus);
++ else if (ssb_extif_available(&bus->extif))
++ return ssb_gpio_extif_init(bus);
++ else
++ SSB_WARN_ON(1);
++
++ return -1;
++}
++
++int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ if (ssb_chipco_available(&bus->chipco) ||
++ ssb_extif_available(&bus->extif)) {
++ return gpiochip_remove(&bus->gpio);
++ } else {
++ SSB_WARN_ON(1);
++ }
++
++ return -1;
++}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
-@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+@@ -17,7 +17,6 @@
+
+ #include "ssb_private.h"
+
+-
+ static inline u32 mips_read32(struct ssb_mipscore *mcore,
+ u16 offset)
+ {
+@@ -147,21 +146,22 @@ static void set_irq(struct ssb_device *d
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
+- ssb_dprintk(KERN_INFO PFX
+- "set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.coreid, oldirq+2, irq+2);
++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.coreid, oldirq+2, irq+2);
+ }
+
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+- int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- ssb_dprintk(KERN_INFO PFX
+- "core 0x%04x, irq :", dev->id.coreid);
+- for (i = 0; i <= 6; i++) {
+- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+- }
+- ssb_dprintk("\n");
++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++ dev->id.coreid,
++ irq_name[0], irq == 0 ? "*" : " ",
++ irq_name[1], irq == 1 ? "*" : " ",
++ irq_name[2], irq == 2 ? "*" : " ",
++ irq_name[3], irq == 3 ? "*" : " ",
++ irq_name[4], irq == 4 ? "*" : " ",
++ irq_name[5], irq == 5 ? "*" : " ",
++ irq_name[6], irq == 6 ? "*" : " ");
+ }
+
+ static void dump_irq(struct ssb_bus *bus)
+@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+ {
+ struct ssb_bus *bus = mcore->dev->bus;
+
+- if (bus->extif.dev)
++ if (ssb_extif_available(&bus->extif))
+ mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
+- else if (bus->chipco.dev)
++ else if (ssb_chipco_available(&bus->chipco))
+ mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
+ else
+ mcore->nr_serial_ports = 0;
+@@ -191,7 +191,7 @@ static void ssb_mips_flash_detect(struct
+ struct ssb_bus *bus = mcore->dev->bus;
+
+ mcore->flash_buswidth = 2;
+- if (bus->chipco.dev) {
++ if (ssb_chipco_available(&bus->chipco)) {
+ mcore->flash_window = 0x1c000000;
+ mcore->flash_window_size = 0x02000000;
+ if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
+@@ -208,9 +208,12 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
struct ssb_bus *bus = mcore->dev->bus;
u32 pll_type, n, m, rate = 0;
+- if (bus->extif.dev) {
+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
+ return ssb_pmu_get_cpu_clock(&bus->chipco);
+
- if (bus->extif.dev) {
++ if (ssb_extif_available(&bus->extif)) {
ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
- } else if (bus->chipco.dev) {
+- } else if (bus->chipco.dev) {
++ } else if (ssb_chipco_available(&bus->chipco)) {
+ ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
+ } else
+ return 0;
+@@ -238,7 +241,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ if (!mcore->dev)
+ return; /* We don't have a MIPS core */
+
+- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++ ssb_dbg("Initializing MIPS core...\n");
+
+ bus = mcore->dev->bus;
+ hz = ssb_clockspeed(bus);
+@@ -246,9 +249,9 @@ void ssb_mipscore_init(struct ssb_mipsco
+ hz = 100000000;
+ ns = 1000000000 / hz;
+
+- if (bus->extif.dev)
++ if (ssb_extif_available(&bus->extif))
+ ssb_extif_timing_init(&bus->extif, ns);
+- else if (bus->chipco.dev)
++ else if (ssb_chipco_available(&bus->chipco))
+ ssb_chipco_timing_init(&bus->chipco, ns);
+
+ /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
+@@ -286,7 +289,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ break;
+ }
+ }
+- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++ ssb_dbg("after irq reconfiguration\n");
+ dump_irq(bus);
+
+ ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ return -ENODEV;
+ }
+
+- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+- pci_name(d));
++ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++ ssb_err("PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+- pci_name(dev), lat);
++ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h
+ return;
+ extpci_core = pc;
+
+- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++ ssb_dbg("PCIcore in host mode found\n");
+ /* Reset devices on the external PCI bus */
+ val = SSB_PCICORE_CTL_RST_OE;
+ val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h
+ udelay(1); /* Assertion time demanded by the PCI standard */
+
+ if (pc->dev->bus->has_cardbus_slot) {
+- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++ ssb_dbg("CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -4,11 +4,13 @@
+ *
+ * Copyright 2005-2008, Broadcom Corporation
+ * Copyright 2006-2008, Michael Buesch <m@bues.ch>
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include <linux/export.h>
++#include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
+ #include <linux/ssb/ssb_driver_pci.h>
+@@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu
+ }
+ EXPORT_SYMBOL(ssb_watchdog_timer_set);
+
++int ssb_watchdog_register(struct ssb_bus *bus)
++{
++ struct bcm47xx_wdt wdt = {};
++ struct platform_device *pdev;
++
++ if (ssb_chipco_available(&bus->chipco)) {
++ wdt.driver_data = &bus->chipco;
++ wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
++ wdt.timer_set_ms = ssb_chipco_watchdog_timer_set_ms;
++ wdt.max_timer_ms = bus->chipco.max_timer_ms;
++ } else if (ssb_extif_available(&bus->extif)) {
++ wdt.driver_data = &bus->extif;
++ wdt.timer_set = ssb_extif_watchdog_timer_set_wdt;
++ wdt.timer_set_ms = ssb_extif_watchdog_timer_set_ms;
++ wdt.max_timer_ms = SSB_EXTIF_WATCHDOG_MAX_TIMER_MS;
++ } else {
++ return -ENODEV;
++ }
++
++ pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
++ bus->busnumber, &wdt,
++ sizeof(wdt));
++ if (IS_ERR(pdev)) {
++ ssb_dbg("can not register watchdog device, err: %li\n",
++ PTR_ERR(pdev));
++ return PTR_ERR(pdev);
++ }
++
++ bus->watchdog = pdev;
++ return 0;
++}
++
+ u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
+ {
+ unsigned long flags;
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
-@@ -140,19 +140,6 @@ static void ssb_device_put(struct ssb_de
+@@ -13,6 +13,7 @@
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <linux/module.h>
++#include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_regs.h>
+ #include <linux/ssb/ssb_driver_gige.h>
+@@ -140,19 +141,6 @@ static void ssb_device_put(struct ssb_de
put_device(dev->dev);
}
@@ -132,7 +1093,7 @@
static int ssb_device_resume(struct device *dev)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
-@@ -250,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b
+@@ -250,11 +238,9 @@ int ssb_devices_freeze(struct ssb_bus *b
ssb_device_put(sdev);
continue;
}
@@ -146,15 +1107,138 @@
sdrv->remove(sdev);
ctx->device_frozen[i] = 1;
}
-@@ -293,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c
- dev_name(sdev->dev));
+@@ -289,11 +275,10 @@ int ssb_devices_thaw(struct ssb_freeze_c
+
+ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+- dev_name(sdev->dev));
++ ssb_err("Failed to thaw device %s\n",
++ dev_name(sdev->dev));
result = err;
}
- ssb_driver_put(sdrv);
ssb_device_put(sdev);
}
-@@ -1094,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -449,10 +434,23 @@ static void ssb_devices_unregister(struc
+ if (sdev->dev)
+ device_unregister(sdev->dev);
+ }
++
++#ifdef CONFIG_SSB_EMBEDDED
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ platform_device_unregister(bus->watchdog);
++#endif
+ }
+
+ void ssb_bus_unregister(struct ssb_bus *bus)
+ {
++ int err;
++
++ err = ssb_gpio_unregister(bus);
++ if (err == -EBUSY)
++ ssb_dbg("Some GPIOs are still in use\n");
++ else if (err)
++ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
++
+ ssb_buses_lock();
+ ssb_devices_unregister(bus);
+ list_del(&bus->list);
+@@ -498,8 +496,7 @@ static int ssb_devices_register(struct s
+
+ devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ if (!devwrap) {
+- ssb_printk(KERN_ERR PFX
+- "Could not allocate device\n");
++ ssb_err("Could not allocate device\n");
+ err = -ENOMEM;
+ goto error;
+ }
+@@ -538,9 +535,7 @@ static int ssb_devices_register(struct s
+ sdev->dev = dev;
+ err = device_register(dev);
+ if (err) {
+- ssb_printk(KERN_ERR PFX
+- "Could not register %s\n",
+- dev_name(dev));
++ ssb_err("Could not register %s\n", dev_name(dev));
+ /* Set dev to NULL to not unregister
+ * dev on error unwinding. */
+ sdev->dev = NULL;
+@@ -577,6 +572,8 @@ static int __devinit ssb_attach_queued_b
+ if (err)
+ goto error;
+ ssb_pcicore_init(&bus->pcicore);
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ ssb_watchdog_register(bus);
+ ssb_bus_may_powerdown(bus);
+
+ err = ssb_devices_register(bus);
+@@ -812,7 +809,13 @@ static int __devinit ssb_bus_register(st
+ if (err)
+ goto err_pcmcia_exit;
+ ssb_chipcommon_init(&bus->chipco);
++ ssb_extif_init(&bus->extif);
+ ssb_mipscore_init(&bus->mipscore);
++ err = ssb_gpio_init(bus);
++ if (err == -ENOTSUPP)
++ ssb_dbg("GPIO driver not activated\n");
++ else if (err)
++ ssb_dbg("Error registering GPIO driver: %i\n", err);
+ err = ssb_fetch_invariants(bus, get_invariants);
+ if (err) {
+ ssb_bus_may_powerdown(bus);
+@@ -863,11 +866,11 @@ int __devinit ssb_bus_pcibus_register(st
+
+ err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCI device %s\n", dev_name(&host_pci->dev));
++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++ dev_name(&host_pci->dev));
+ } else {
+- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+- " of SSB with error %d\n", err);
++ ssb_err("Failed to register PCI version of SSB with error %d\n",
++ err);
+ }
+
+ return err;
+@@ -888,8 +891,8 @@ int __devinit ssb_bus_pcmciabus_register
+
+ err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCMCIA device %s\n", pcmcia_dev->devname);
++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++ pcmcia_dev->devname);
+ }
+
+ return err;
+@@ -911,8 +914,8 @@ int __devinit ssb_bus_sdiobus_register(s
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "SDIO device %s\n", sdio_func_id(func));
++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++ sdio_func_id(func));
+ }
+
+ return err;
+@@ -931,8 +934,8 @@ int __devinit ssb_bus_ssbbus_register(st
+
+ err = ssb_bus_register(bus, get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+- "address 0x%08lX\n", baseaddr);
++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++ baseaddr);
+ }
+
+ return err;
+@@ -1094,6 +1097,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
u32 plltype;
u32 clkctl_n, clkctl_m;
@@ -164,9 +1248,78 @@
if (ssb_extif_available(&bus->extif))
ssb_extif_get_clockcontrol(&bus->extif, &plltype,
&clkctl_n, &clkctl_m);
+@@ -1131,8 +1137,7 @@ static u32 ssb_tmslow_reject_bitmask(str
+ case SSB_IDLOW_SSBREV_27: /* same here */
+ return SSB_TMSLOW_REJECT; /* this is a guess */
+ default:
+- printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
+- WARN_ON(1);
++ WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
+ }
+ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
+ }
+@@ -1324,7 +1329,7 @@ out:
+ #endif
+ return err;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++ ssb_err("Bus powerdown failed\n");
+ goto out;
+ }
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1347,7 +1352,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++ ssb_err("Bus powerup failed\n");
+ return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1455,15 +1460,13 @@ static int __init ssb_modinit(void)
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+- "initialization failed\n");
++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+- "driver initialization failed\n");
++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
-@@ -178,6 +178,18 @@ err_pci:
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ }
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+ }
+
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ unsigned long flags;
+
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -178,6 +177,18 @@ err_pci:
#define SPEX(_outvar, _offset, _mask, _shift) \
SPEX16(_outvar, _offset, _mask, _shift)
@@ -185,30 +1338,140 @@
static inline u8 ssb_crc8(u8 crc, u8 data)
{
-@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss
+@@ -219,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ return t[crc ^ data];
+ }
+
++static void sprom_get_mac(char *mac, const u16 *in)
++{
++ int i;
++ for (i = 0; i < 3; i++) {
++ *mac++ = in[i] >> 8;
++ *mac++ = in[i];
++ }
++}
++
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
{
- int i;
- u16 v;
+ int word;
+@@ -266,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ u32 spromctl;
+ u16 size = bus->sprom_size;
+
+- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ if (err)
+ goto err_ctlreg;
+@@ -274,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ mmiowb();
+ msleep(20);
+@@ -297,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ if (err)
+ goto err_ctlreg;
+ msleep(500);
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+
+ return 0;
+ err_ctlreg:
+- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++ ssb_err("Could not access SPROM control register.\n");
+ return err;
+ }
+
+@@ -327,11 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
+ return (s8)gain;
+ }
+
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++ SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
- s8 gain;
u16 loc[3];
if (out->revision == 3) /* rev 3 moved MAC */
-@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss
+@@ -341,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ loc[1] = SSB_SPROM1_ET0MAC;
+ loc[2] = SSB_SPROM1_ET1MAC;
+ }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[0]) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[1]) + i];
+- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[2]) + i];
+- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ }
+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -361,8 +384,10 @@ static void sprom_extract_r123(struct ss
SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
- SSB_SPROM1_BINF_CCODE_SHIFT);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
SSB_SPROM1_BINF_ANTA_SHIFT);
SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
-@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss
+@@ -386,24 +411,19 @@ static void sprom_extract_r123(struct ss
+ SSB_SPROM1_ITSSI_A_SHIFT);
+ SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
- if (out->revision >= 2)
- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+- if (out->revision >= 2)
+- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
@@ -233,14 +1496,36 @@
+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
++ if (out->revision >= 2)
++ sprom_extract_r23(out, in);
}
/* Revs 4 5 and 8 have partially shared layout */
-@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb
+@@ -448,30 +468,30 @@ static void sprom_extract_r458(struct ss
+
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 il0mac_offset;
+
+ if (out->revision == 4)
+ il0mac_offset = SSB_SPROM4_IL0MAC;
+ else
+ il0mac_offset = SSB_SPROM5_IL0MAC;
+- /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(il0mac_offset) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++
++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
if (out->revision == 4) {
- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
@@ -256,7 +1541,7 @@
SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
-@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb
+@@ -504,16 +524,14 @@ static void sprom_extract_r45(struct ssb
}
/* Extract the antenna gain values. */
@@ -277,12 +1562,12 @@
sprom_extract_r458(out, in);
-@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb
+@@ -523,14 +541,21 @@ static void sprom_extract_r45(struct ssb
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
- u16 v;
-+ u16 v, o;
++ u16 o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
@@ -291,18 +1576,21 @@
+ ARRAY_SIZE(out->core_pwr_info));
/* extract the MAC address */
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-@@ -596,16 +611,46 @@ static void sprom_extract_r8(struct ssb_
+@@ -596,16 +621,46 @@ static void sprom_extract_r8(struct ssb_
SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
/* Extract the antenna gain values. */
@@ -355,7 +1643,7 @@
/* Extract FEM info */
SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
-@@ -630,6 +675,63 @@ static void sprom_extract_r8(struct ssb_
+@@ -630,6 +685,63 @@ static void sprom_extract_r8(struct ssb_
SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
@@ -419,7 +1707,79 @@
sprom_extract_r458(out, in);
/* TODO - get remaining rev 8 stuff needed */
-@@ -759,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct
+@@ -641,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ memset(out, 0, sizeof(*out));
+
+ out->revision = in[size - 1] & 0x00FF;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++ ssb_dbg("SPROM revision %d detected\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
+
+@@ -650,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ * number stored in the SPROM.
+ * Always extract r1. */
+ out->revision = 1;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++ ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+@@ -667,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ sprom_extract_r8(out, in);
+ break;
+ default:
+- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+- " revision %d detected. Will extract"
+- " v1\n", out->revision);
++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++ out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
+ }
+@@ -689,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ u16 *buf;
+
+ if (!ssb_is_sprom_available(bus)) {
+- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++ ssb_err("No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailable! */
+@@ -708,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+@@ -733,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+- ssb_printk(KERN_WARNING PFX "WARNING: Using"
+- " fallback SPROM failed (err %d)\n",
+- err);
++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++ err);
+ } else {
+- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+- " revision %d provided by"
+- " platform.\n", sprom->revision);
++ ssb_dbg("Using SPROM revision %d provided by platform\n",
++ sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+- " SPROM CRC (corrupt SPROM)\n");
++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ }
+ }
+ err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+@@ -759,7 +867,6 @@ static void ssb_pci_get_boardinfo(struct
{
bi->vendor = bus->host_pci->subsystem_vendor;
bi->type = bus->host_pci->subsystem_device;
@@ -429,7 +1789,95 @@
int ssb_pci_get_invariants(struct ssb_bus *bus,
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
-@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants(
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return err;
+ }
+
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ int err;
+
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++ ssb_err("Failed to switch pcmcia segment\n");
+ return err;
+ }
+
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ bool failed = 0;
+ size_t size = SSB_PCMCIA_SPROM_SIZE;
+
+- ssb_printk(KERN_NOTICE PFX
+- "Writing SPROM. Do NOT turn off the power! "
+- "Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not enable SPROM write access.\n");
++ ssb_notice("Could not enable SPROM write access\n");
+ return -EBUSY;
+ }
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Failed to write to SPROM.\n");
++ ssb_notice("Failed to write to SPROM\n");
+ failed = 1;
+ break;
+ }
+ }
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not disable SPROM write access.\n");
++ ssb_notice("Could not disable SPROM write access\n");
+ failed = 1;
+ }
+ msleep(500);
+ if (!failed) {
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+ }
+
+ return failed ? -EBUSY : 0;
+@@ -676,14 +670,10 @@ static int ssb_pcmcia_do_get_invariants(
case SSB_PCMCIA_CIS_ANTGAIN:
GOTO_ERROR_ON(tuple->TupleDataLen != 2,
"antg tpl size");
@@ -448,6 +1896,41 @@
break;
case SSB_PCMCIA_CIS_BFLAGS:
GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
+@@ -704,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ return -ENOSPC; /* continue with next entry */
+
+ error:
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+@@ -726,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
+ }
+@@ -737,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
+
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+@@ -847,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++ ssb_err("Failed to initialize PCMCIA host device\n");
+ return err;
+ }
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -90,6 +90,8 @@ const char *ssb_core_name(u16 coreid)
@@ -459,16 +1942,93 @@
}
return "UNKNOWN";
}
-@@ -318,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -123,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ chipid_fallback = 0x4401;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "PCI-ID not in fallback list\n");
++ ssb_err("PCI-ID not in fallback list\n");
+ }
+
+ return chipid_fallback;
+@@ -150,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ case 0x4704:
+ return 9;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "CHIPID not in nrcores fallback list\n");
++ ssb_err("CHIPID not in nrcores fallback list\n");
+ }
+
+ return 1;
+@@ -318,12 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->chip_package = 0;
}
}
-+ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
-+ "package 0x%02X\n", bus->chip_id, bus->chip_rev,
-+ bus->chip_package);
++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ bus->chip_id, bus->chip_rev, bus->chip_package);
if (!bus->nr_devices)
bus->nr_devices = chipid_to_nrcores(bus->chip_id);
if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+- ssb_printk(KERN_ERR PFX
+- "More than %d ssb cores found (%d)\n",
+- SSB_MAX_NR_CORES, bus->nr_devices);
++ ssb_err("More than %d ssb cores found (%d)\n",
++ SSB_MAX_NR_CORES, bus->nr_devices);
+ goto err_unmap;
+ }
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -365,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ nr_80211_cores++;
+ if (nr_80211_cores > 1) {
+ if (!we_support_multiple_80211_cores(bus)) {
+- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+- "802.11 core\n");
++ ssb_dbg("Ignoring additional 802.11 core\n");
+ continue;
+ }
+ }
+@@ -374,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ if (bus->extif.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple EXTIFs found\n");
++ ssb_warn("WARNING: Multiple EXTIFs found\n");
+ break;
+ }
+ bus->extif.dev = dev;
+@@ -383,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ break;
+ case SSB_DEV_CHIPCOMMON:
+ if (bus->chipco.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple ChipCommon found\n");
++ ssb_warn("WARNING: Multiple ChipCommon found\n");
+ break;
+ }
+ bus->chipco.dev = dev;
+@@ -393,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple MIPS cores found\n");
++ ssb_warn("WARNING: Multiple MIPS cores found\n");
+ break;
+ }
+ bus->mipscore.dev = dev;
+@@ -415,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ }
+ }
+ if (bus->pcicore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple PCI(E) cores found\n");
++ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ break;
+ }
+ bus->pcicore.dev = dev;
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
@@ -490,20 +2050,139 @@
break;
case SSB_SDIO_CIS_BFLAGS:
GOTO_ERROR_ON((tuple->size != 3) &&
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ goto out_kfree;
+ err = ssb_devices_freeze(bus, &freeze);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++ ssb_err("SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+ err = ssb_devices_thaw(&freeze);
+ if (err)
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++ ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
-@@ -207,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex
+@@ -3,21 +3,33 @@
+
+ #include <linux/ssb/ssb.h>
+ #include <linux/types.h>
++#include <linux/bcm47xx_wdt.h>
+
+
+ #define PFX "ssb: "
+
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...) \
++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk printk
++# define ssb_printk(fmt, ...) \
++ printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+
++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...) \
++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...) \
++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+
+ #ifdef CONFIG_SSB_DEBUG
+@@ -207,4 +219,60 @@ static inline void b43_pci_ssb_bridge_ex
}
#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+/* driver_chipcommon_pmu.c */
+extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
+extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
++extern u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc);
++
++extern u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
++ u32 ticks);
++extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
++
++#ifdef CONFIG_SSB_DRIVER_EXTIF
++extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
++extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
++#else
++static inline u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
++ u32 ticks)
++{
++ return 0;
++}
++static inline u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt,
++ u32 ms)
++{
++ return 0;
++}
++#endif
++
++#ifdef CONFIG_SSB_EMBEDDED
++extern int ssb_watchdog_register(struct ssb_bus *bus);
++#else /* CONFIG_SSB_EMBEDDED */
++static inline int ssb_watchdog_register(struct ssb_bus *bus)
++{
++ return 0;
++}
++#endif /* CONFIG_SSB_EMBEDDED */
++
++#ifdef CONFIG_SSB_DRIVER_EXTIF
++extern void ssb_extif_init(struct ssb_extif *extif);
++#else
++static inline void ssb_extif_init(struct ssb_extif *extif)
++{
++}
++#endif
++
++#ifdef CONFIG_SSB_DRIVER_GPIO
++extern int ssb_gpio_init(struct ssb_bus *bus);
++extern int ssb_gpio_unregister(struct ssb_bus *bus);
++#else /* CONFIG_SSB_DRIVER_GPIO */
++static inline int ssb_gpio_init(struct ssb_bus *bus)
++{
++ return -ENOTSUPP;
++}
++static inline int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ return 0;
++}
++#endif /* CONFIG_SSB_DRIVER_GPIO */
+
#endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -16,6 +16,12 @@ struct pcmcia_device;
+@@ -6,8 +6,10 @@
+ #include <linux/types.h>
+ #include <linux/spinlock.h>
+ #include <linux/pci.h>
++#include <linux/gpio.h>
+ #include <linux/mod_devicetable.h>
+ #include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
+
+ #include <linux/ssb/ssb_regs.h>
+
+@@ -16,19 +18,28 @@ struct pcmcia_device;
struct ssb_bus;
struct ssb_driver;
@@ -515,8 +2194,14 @@
+
struct ssb_sprom {
u8 revision;
- u8 il0mac[6]; /* MAC address for 802.11b/g */
-@@ -26,9 +32,12 @@ struct ssb_sprom {
+- u8 il0mac[6]; /* MAC address for 802.11b/g */
+- u8 et0mac[6]; /* MAC address for Ethernet */
+- u8 et1mac[6]; /* MAC address for 802.11a */
++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et0phyaddr; /* MII address for enet0 */
+ u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
u16 board_rev; /* Board revision number from SPROM. */
@@ -531,7 +2216,7 @@
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
-@@ -47,10 +56,10 @@ struct ssb_sprom {
+@@ -47,10 +58,10 @@ struct ssb_sprom {
u8 gpio1; /* GPIO pin 1 */
u8 gpio2; /* GPIO pin 2 */
u8 gpio3; /* GPIO pin 3 */
@@ -546,7 +2231,7 @@
u8 itssi_a; /* Idle TSSI Target for A-PHY */
u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
u8 tri2g; /* 2.4GHz TX isolation */
-@@ -61,8 +70,8 @@ struct ssb_sprom {
+@@ -61,8 +72,8 @@ struct ssb_sprom {
u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
@@ -557,7 +2242,7 @@
u8 rssisav2g; /* 2GHz RSSI params */
u8 rssismc2g;
u8 rssismf2g;
-@@ -82,16 +91,13 @@ struct ssb_sprom {
+@@ -82,16 +93,13 @@ struct ssb_sprom {
u16 boardflags2_hi; /* Board flags (bits 48-63) */
/* TODO store board flags in a single u64 */
@@ -577,7 +2262,7 @@
} antenna_gain;
struct {
-@@ -103,14 +109,85 @@ struct ssb_sprom {
+@@ -103,14 +111,85 @@ struct ssb_sprom {
} ghz5;
} fem;
@@ -665,7 +2350,7 @@
};
-@@ -166,6 +243,7 @@ struct ssb_bus_ops {
+@@ -166,6 +245,7 @@ struct ssb_bus_ops {
#define SSB_DEV_MINI_MACPHY 0x823
#define SSB_DEV_ARM_1176 0x824
#define SSB_DEV_ARM_7TDMI 0x825
@@ -673,6 +2358,214 @@
/* Vendor-ID values */
#define SSB_VENDOR_BROADCOM 0x4243
+@@ -260,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
+ #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB 0x0406
++#define SSB_BOARD_BCM94301MP 0x0407
++#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_BCM94309CB 0x040B
++#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BU4306 0x0416
+ #define SSB_BOARD_BCM94306MP 0x0418
+ #define SSB_BOARD_BCM4309G 0x0421
+ #define SSB_BOARD_BCM4306CB 0x0417
+-#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
++#define SSB_BOARD_BU4318 0x0447
++#define SSB_BOARD_CB4318 0x0448
++#define SSB_BOARD_MPG4318 0x0449
+ #define SSB_BOARD_MP4318 0x044A
+-#define SSB_BOARD_BU4306 0x0416
+-#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_SD4318 0x044B
++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
++#define SSB_BOARD_BCM94303MP 0x044E
++#define SSB_BOARD_BCM94306MPM 0x0450
++#define SSB_BOARD_BCM94306MPL 0x0453
++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA 0x0457
++#define SSB_BOARD_BCM94306MPH 0x045B
++#define SSB_BOARD_BCM94306PCIV 0x045C
++#define SSB_BOARD_BCM94318MPGH 0x0463
++#define SSB_BOARD_BU4311 0x0464
++#define SSB_BOARD_BCM94311MC 0x0465
++#define SSB_BOARD_BCM94311MCAG 0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321 0x046B
++#define SSB_BOARD_BU4321E 0x047C
++#define SSB_BOARD_MP4321 0x046C
++#define SSB_BOARD_CB2_4321 0x046D
++#define SSB_BOARD_CB2_4321_AG 0x0066
++#define SSB_BOARD_MC4321 0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU 0x0490
++#define SSB_BOARD_BCM94325BGABU 0x0491
++#define SSB_BOARD_BCM94325SDGWB 0x0492
++#define SSB_BOARD_BCM94325SDGMDL 0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC 0x04A4
++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
++#define SSB_BOARD_BCM94322HM 0x04B0
++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312 0x048A
++#define SSB_BOARD_BCM4312MCGSG 0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+@@ -354,7 +482,11 @@ struct ssb_bus {
+ #ifdef CONFIG_SSB_EMBEDDED
+ /* Lock for GPIO register access. */
+ spinlock_t gpio_lock;
++ struct platform_device *watchdog;
+ #endif /* EMBEDDED */
++#ifdef CONFIG_SSB_DRIVER_GPIO
++ struct gpio_chip gpio;
++#endif /* DRIVER_GPIO */
+
+ /* Internal-only stuff follows. Do not touch. */
+ struct list_head list;
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -219,6 +219,7 @@
+ #define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
+ #define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+ #define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
++#define SSB_CHIPCO_PMU_CTL_PLL_UPD 0x00000400
+ #define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+ #define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+ #define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
+@@ -588,7 +589,10 @@ struct ssb_chipcommon {
+ u32 status;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
++ spinlock_t gpio_lock;
+ struct ssb_chipcommon_pmu pmu;
++ u32 ticks_per_ms;
++ u32 max_timer_ms;
+ };
+
+ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
+@@ -628,8 +632,7 @@ enum ssb_clkmode {
+ extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
+ enum ssb_clkmode mode);
+
+-extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
+- u32 ticks);
++extern u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks);
+
+ void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
+
+@@ -642,6 +645,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
+ u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
+ u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
++u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value);
++u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value);
+
+ #ifdef CONFIG_SSB_SERIAL
+ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+@@ -661,5 +666,6 @@ enum ssb_pmu_ldo_volt_id {
+ void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ enum ssb_pmu_ldo_volt_id id, u32 voltage);
+ void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
+
+ #endif /* LINUX_SSB_CHIPCO_H_ */
+--- a/include/linux/ssb/ssb_driver_extif.h
++++ b/include/linux/ssb/ssb_driver_extif.h
+@@ -152,12 +152,16 @@
+ /* watchdog */
+ #define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
+
++#define SSB_EXTIF_WATCHDOG_MAX_TIMER ((1 << 28) - 1)
++#define SSB_EXTIF_WATCHDOG_MAX_TIMER_MS (SSB_EXTIF_WATCHDOG_MAX_TIMER \
++ / (SSB_EXTIF_WATCHDOG_CLK / 1000))
+
+
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+
+ struct ssb_extif {
+ struct ssb_device *dev;
++ spinlock_t gpio_lock;
+ };
+
+ static inline bool ssb_extif_available(struct ssb_extif *extif)
+@@ -171,8 +175,7 @@ extern void ssb_extif_get_clockcontrol(s
+ extern void ssb_extif_timing_init(struct ssb_extif *extif,
+ unsigned long ns);
+
+-extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+- u32 ticks);
++extern u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks);
+
+ /* Extif GPIO pin access */
+ u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
+@@ -205,10 +208,52 @@ void ssb_extif_get_clockcontrol(struct s
+ }
+
+ static inline
+-void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+- u32 ticks)
++void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
+ {
+ }
+
++static inline
++u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks)
++{
++ return 0;
++}
++
++static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
++{
++ return 0;
++}
++
++static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask,
++ u32 value)
++{
++ return 0;
++}
++
++static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask,
++ u32 value)
++{
++ return 0;
++}
++
++static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask,
++ u32 value)
++{
++ return 0;
++}
++
++static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask,
++ u32 value)
++{
++ return 0;
++}
++
++#ifdef CONFIG_SSB_SERIAL
++static inline int ssb_extif_serial_init(struct ssb_extif *extif,
++ struct ssb_serial_port *ports)
++{
++ return 0;
++}
++#endif /* CONFIG_SSB_SERIAL */
++
+ #endif /* CONFIG_SSB_DRIVER_EXTIF */
+ #endif /* LINUX_SSB_EXTIFCORE_H_ */
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -2,6 +2,7 @@
@@ -683,9 +2576,71 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
+@@ -96,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
+ return 0;
+ }
+
+-#ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
+ /* Get the device MAC address */
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+-{
+- char buf[20];
+- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+- return;
+- nvram_parse_macaddr(buf, macaddr);
+-}
+-#else
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (!dev)
++ return -ENODEV;
++
++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
++ return 0;
+ }
+-#endif
+
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+@@ -174,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
+ {
+ return 0;
+ }
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++ return -ENODEV;
++}
+
+ #endif /* CONFIG_SSB_DRIVER_GIGE */
+ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -41,6 +41,11 @@ void ssb_mipscore_init(struct ssb_mipsco
+ {
+ }
+
++static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
++{
++ return 0;
++}
++
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+
+ #endif /* LINUX_SSB_MIPSCORE_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -228,6 +228,7 @@
+@@ -172,6 +172,7 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
++#define SSB_SPROMSIZE_WORDS_R10 230
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
+ #define SSB_SPROM_REVISION 0x007E
+@@ -228,6 +229,7 @@
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_AGAIN_A_SHIFT 8
@@ -693,7 +2648,7 @@
/* SPROM Revision 2 (inherits from rev 1) */
#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
-@@ -267,6 +268,7 @@
+@@ -267,6 +269,7 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
@@ -701,7 +2656,24 @@
#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
-@@ -389,6 +391,11 @@
+@@ -287,11 +290,11 @@
+ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
+ #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
++#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */
++#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0
++#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8
+ #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
+ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
+ #define SSB_SPROM4_AGAIN0_SHIFT 0
+@@ -389,6 +392,11 @@
#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM8_GPIOB_P3_SHIFT 8
@@ -713,7 +2685,7 @@
#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
-@@ -404,6 +411,13 @@
+@@ -404,6 +412,13 @@
#define SSB_SPROM8_AGAIN2_SHIFT 0
#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM8_AGAIN3_SHIFT 8
@@ -727,7 +2699,7 @@
#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
#define SSB_SPROM8_RSSISMF2G 0x000F
#define SSB_SPROM8_RSSISMC2G 0x00F0
-@@ -430,6 +444,7 @@
+@@ -430,6 +445,7 @@
#define SSB_SPROM8_TRI5GH_SHIFT 8
#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
@@ -735,7 +2707,7 @@
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
#define SSB_SPROM8_FEM2G 0x00AE
-@@ -445,10 +460,71 @@
+@@ -445,10 +461,71 @@
#define SSB_SROM8_FEM_ANTSWLUT 0xF800
#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
#define SSB_SPROM8_THERMAL 0x00B2
@@ -768,7 +2740,7 @@
+#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
+#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
+#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
-+#define SSB_SPROM8_TEMPDELTA 0x00BA
++#define SSB_SPROM8_TEMPDELTA 0x00BC
+#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff
+#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0
+#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00
@@ -811,7 +2783,7 @@
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -473,12 +549,23 @@
+@@ -473,12 +550,23 @@
#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
#define SSB_SPROM8_PA1HIB1 0x00DA
#define SSB_SPROM8_PA1HIB2 0x00DC
@@ -835,3 +2807,37 @@
/* Values for boardflags_lo read from SPROM */
#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
+--- /dev/null
++++ b/include/linux/bcm47xx_wdt.h
+@@ -0,0 +1,19 @@
++#ifndef LINUX_BCM47XX_WDT_H_
++#define LINUX_BCM47XX_WDT_H_
++
++#include <linux/types.h>
++
++
++struct bcm47xx_wdt {
++ u32 (*timer_set)(struct bcm47xx_wdt *, u32);
++ u32 (*timer_set_ms)(struct bcm47xx_wdt *, u32);
++ u32 max_timer_ms;
++
++ void *driver_data;
++};
++
++static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt)
++{
++ return wdt->driver_data;
++}
++#endif /* LINUX_BCM47XX_WDT_H_ */
+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -4259,7 +4259,8 @@ static void b43_nphy_pmu_spur_avoid(stru
+ #endif
+ #ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+- /* FIXME */
++ ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
++ avoid);
+ break;
+ #endif
+ }
diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch
index 29aaa29582..eeea9dbcbf 100644
--- a/target/linux/generic/patches-3.3/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.3/025-bcma_backport.patch
@@ -1,6 +1,32 @@
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi
+
+ p->mapbase = (unsigned int) bcma_port->regs;
+ p->membase = (void *) bcma_port->regs;
+- p->irq = bcma_port->irq + 2;
++ p->irq = bcma_port->irq;
+ p->uartclk = bcma_port->baud_base;
+ p->regshift = bcma_port->reg_shift;
+ p->iotype = UPIO_MEM;
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -94,7 +94,7 @@ int gpio_to_irq(unsigned gpio)
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+- return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2;
++ return bcma_core_irq(bcm47xx_bus.bcma.bus.drv_cc.core);
+ #endif
+ }
+ return -EINVAL;
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -29,7 +29,7 @@ config BCMA_HOST_PCI
+@@ -26,10 +26,11 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
config BCMA_DRIVER_PCI_HOSTMODE
bool "Driver for PCI core working in hostmode"
@@ -9,7 +35,7 @@
help
PCI core hostmode operation (external PCI bus).
-@@ -46,6 +46,15 @@ config BCMA_DRIVER_MIPS
+@@ -46,6 +47,23 @@ config BCMA_DRIVER_MIPS
If unsure, say N
@@ -22,22 +48,31 @@
+
+ If unsure, say N
+
++config BCMA_DRIVER_GPIO
++ bool "BCMA GPIO driver"
++ depends on BCMA && GPIOLIB
++ help
++ Driver to provide access to the GPIO pins of the bcma bus.
++
++ If unsure, say N
++
config BCMA_DEBUG
bool "BCMA debugging"
depends on BCMA
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
-@@ -3,6 +3,7 @@ bcma-y += driver_chipcommon.o driver
+@@ -3,6 +3,8 @@ bcma-y += driver_chipcommon.o driver
bcma-y += driver_pci.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
+bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
++bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o
bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
obj-$(CONFIG_BCMA) += bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -10,10 +10,19 @@
+@@ -10,10 +10,21 @@
#define BCMA_CORE_SIZE 0x1000
@@ -54,35 +89,128 @@
/* main.c */
-int bcma_bus_register(struct bcma_bus *bus);
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+int __devinit bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
struct bcma_device *core_cc,
-@@ -48,8 +57,12 @@ extern int __init bcma_host_pci_init(voi
+@@ -22,6 +33,8 @@ int __init bcma_bus_early_register(struc
+ int bcma_bus_suspend(struct bcma_bus *bus);
+ int bcma_bus_resume(struct bcma_bus *bus);
+ #endif
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++ u8 unit);
+
+ /* scan.c */
+ int bcma_bus_scan(struct bcma_bus *bus);
+@@ -39,8 +52,8 @@ void bcma_chipco_serial_init(struct bcma
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+ /* driver_chipcommon_pmu.c */
+-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
++u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
++u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
+
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+@@ -48,8 +61,29 @@ extern int __init bcma_host_pci_init(voi
extern void __exit bcma_host_pci_exit(void);
#endif /* CONFIG_BCMA_HOST_PCI */
+/* driver_pci.c */
+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+
++extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
++
#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc);
+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++/* driver_gpio.c */
++int bcma_gpio_init(struct bcma_drv_cc *cc);
++int bcma_gpio_unregister(struct bcma_drv_cc *cc);
++#else
++static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++ return -ENOTSUPP;
++}
++static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return 0;
++}
++#endif /* CONFIG_BCMA_DRIVER_GPIO */
++
#endif
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
-@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic
- udelay(10);
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,12 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
}
EXPORT_SYMBOL_GPL(bcma_core_disable);
-@@ -74,10 +75,10 @@ void bcma_core_set_clockmode(struct bcma
+
+@@ -42,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -64,7 +87,7 @@ void bcma_core_set_clockmode(struct bcma
+ switch (clkmode) {
+ case BCMA_CLKMODE_FAST:
+ bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+- udelay(64);
++ usleep_range(64, 300);
+ for (i = 0; i < 1500; i++) {
+ if (bcma_read32(core, BCMA_CLKCTLST) &
+ BCMA_CLKCTLST_HAVEHT) {
+@@ -74,10 +97,10 @@ void bcma_core_set_clockmode(struct bcma
udelay(10);
}
if (i)
@@ -95,7 +223,7 @@
break;
}
}
-@@ -101,9 +102,9 @@ void bcma_core_pll_ctl(struct bcma_devic
+@@ -101,9 +124,15 @@ void bcma_core_pll_ctl(struct bcma_devic
udelay(10);
}
if (i)
@@ -103,11 +231,17 @@
+ bcma_err(core->bus, "PLL enable timeout\n");
} else {
- pr_warn("Disabling PLL not supported yet!\n");
-+ bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++ /*
++ * Mask the PLL but don't wait for it to be disabled. PLL may be
++ * shared between cores and will be still up if there is another
++ * core using it.
++ */
++ bcma_mask32(core, BCMA_CLKCTLST, ~req);
++ bcma_read32(core, BCMA_CLKCTLST);
}
}
EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
-@@ -119,8 +120,8 @@ u32 bcma_core_dma_translation(struct bcm
+@@ -119,8 +148,8 @@ u32 bcma_core_dma_translation(struct bcm
else
return BCMA_DMA_TRANSLATION_DMA32_CMT;
default:
@@ -120,7 +254,158 @@
}
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
-@@ -44,7 +44,7 @@ void bcma_core_chipcommon_init(struct bc
+@@ -4,12 +4,15 @@
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include "bcma_private.h"
++#include <linux/bcm47xx_wdt.h>
+ #include <linux/export.h>
++#include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+
+ static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+@@ -22,29 +25,136 @@ static inline u32 bcma_cc_write32_masked
+ return value;
+ }
+
+-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
+ {
+- u32 leddc_on = 10;
+- u32 leddc_off = 90;
++ if (cc->capabilities & BCMA_CC_CAP_PMU)
++ return bcma_pmu_get_alp_clock(cc);
+
+- if (cc->setup_done)
++ return 20000000;
++}
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
++
++static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 nb;
++
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
++ nb = 32;
++ else if (cc->core->id.rev < 26)
++ nb = 16;
++ else
++ nb = (cc->core->id.rev >= 37) ? 32 : 24;
++ } else {
++ nb = 28;
++ }
++ if (nb == 32)
++ return 0xffffffff;
++ else
++ return (1 << nb) - 1;
++}
++
++static u32 bcma_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
++ u32 ticks)
++{
++ struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
++
++ return bcma_chipco_watchdog_timer_set(cc, ticks);
++}
++
++static u32 bcma_chipco_watchdog_timer_set_ms_wdt(struct bcm47xx_wdt *wdt,
++ u32 ms)
++{
++ struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
++ u32 ticks;
++
++ ticks = bcma_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
++ return ticks / cc->ticks_per_ms;
++}
++
++static int bcma_chipco_watchdog_ticks_per_ms(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
++ /* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP clock */
++ return bcma_chipco_get_alp_clock(cc) / 4000;
++ else
++ /* based on 32KHz ILP clock */
++ return 32;
++ } else {
++ return bcma_chipco_get_alp_clock(cc) / 1000;
++ }
++}
++
++int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
++{
++ struct bcm47xx_wdt wdt = {};
++ struct platform_device *pdev;
++
++ wdt.driver_data = cc;
++ wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt;
++ wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt;
++ wdt.max_timer_ms = bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
++
++ pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
++ cc->core->bus->num, &wdt,
++ sizeof(wdt));
++ if (IS_ERR(pdev))
++ return PTR_ERR(pdev);
++
++ cc->watchdog = pdev;
++
++ return 0;
++}
++
++void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
++{
++ if (cc->early_setup_done)
+ return;
+
++ spin_lock_init(&cc->gpio_lock);
++
+ if (cc->core->id.rev >= 11)
+ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+ if (cc->core->id.rev >= 35)
+ cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+
++ if (cc->capabilities & BCMA_CC_CAP_PMU)
++ bcma_pmu_early_init(cc);
++
++ cc->early_setup_done = true;
++}
++
++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++{
++ u32 leddc_on = 10;
++ u32 leddc_off = 90;
++
++ if (cc->setup_done)
++ return;
++
++ bcma_core_chipcommon_early_init(cc);
++
+ if (cc->core->id.rev >= 20) {
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_init(cc);
if (cc->capabilities & BCMA_CC_CAP_PCTL)
@@ -129,7 +414,159 @@
if (cc->core->id.rev >= 16) {
if (cc->core->bus->sprom.leddc_on_time &&
-@@ -137,8 +137,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -56,15 +166,33 @@ void bcma_core_chipcommon_init(struct bc
+ ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
+ (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
+ }
++ cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc);
+
+ cc->setup_done = true;
+ }
+
+ /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+-void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
++u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+ {
+- /* instant NMI */
+- bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
++ u32 maxt;
++ enum bcma_clkmode clkmode;
++
++ maxt = bcma_chipco_watchdog_get_max_timer(cc);
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (ticks == 1)
++ ticks = 2;
++ else if (ticks > maxt)
++ ticks = maxt;
++ bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
++ } else {
++ clkmode = ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC;
++ bcma_core_set_clockmode(cc->core, clkmode);
++ if (ticks > maxt)
++ ticks = maxt;
++ /* instant NMI */
++ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
++ }
++ return ticks;
+ }
+
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+@@ -84,28 +212,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+
+ u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
+
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+
++/*
++ * If the bit is set to 0, chipcommon controlls this GPIO,
++ * if the bit is set to 1, it is used by some part of the chip and not our code.
++ */
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res;
++
++ if (cc->core->id.rev < 20)
++ return 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLUP, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res;
++
++ if (cc->core->id.rev < 20)
++ return 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLDOWN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+@@ -118,8 +317,7 @@ void bcma_chipco_serial_init(struct bcma
+ struct bcma_serial_port *ports = cc->serial_ports;
+
+ if (ccrev >= 11 && ccrev != 15) {
+- /* Fixed ALP clock */
+- baud_base = bcma_pmu_alp_clock(cc);
++ baud_base = bcma_chipco_get_alp_clock(cc);
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+@@ -137,12 +335,11 @@ void bcma_chipco_serial_init(struct bcma
| BCMA_CC_CORECTL_UARTCLKEN);
}
} else {
@@ -139,6 +576,11 @@
return;
}
+- irq = bcma_core_mips_irq(cc->core);
++ irq = bcma_core_irq(cc->core);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -3,7 +3,8 @@
@@ -151,29 +593,136 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -54,38 +55,19 @@ void bcma_chipco_regctl_maskset(struct b
+@@ -12,12 +13,13 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
+-static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
++u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+ {
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
+
+ void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
+ {
+@@ -54,19 +56,106 @@ void bcma_chipco_regctl_maskset(struct b
}
EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
--static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
--{
-- struct bcma_bus *bus = cc->core->bus;
--
-- switch (bus->chipinfo.id) {
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
+ static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
+
+ switch (bus->chipinfo.id) {
- case 0x4313:
- case 0x4331:
- case 43224:
- case 43225:
-- break;
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
+ break;
- default:
- pr_err("PLL init unknown for device 0x%04X\n",
- bus->chipinfo.id);
-- }
--}
--
- static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
- {
- struct bcma_bus *bus = cc->core->bus;
+ }
+ }
+
+@@ -76,16 +165,32 @@ static void bcma_pmu_resources_init(stru
u32 min_msk = 0, max_msk = 0;
switch (bus->chipinfo.id) {
@@ -184,7 +733,25 @@
break;
- case 43224:
- case 43225:
-- break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
+ break;
default:
- pr_err("PMU resource config unknown for device 0x%04X\n",
- bus->chipinfo.id);
@@ -193,16 +760,16 @@
}
/* Set the resource masks. */
-@@ -93,22 +75,9 @@ static void bcma_pmu_resources_init(stru
+@@ -93,22 +198,12 @@ static void bcma_pmu_resources_init(stru
bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
if (max_msk)
bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
-}
--
+
-void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
-{
- struct bcma_bus *bus = cc->core->bus;
-
+-
- switch (bus->chipinfo.id) {
- case 0x4313:
- case 0x4331:
@@ -213,12 +780,15 @@
- pr_err("PMU switch/regulators init unknown for device "
- "0x%04X\n", bus->chipinfo.id);
- }
-+ /* Add some delay; allow resources to come up and settle. */
++ /*
++ * Add some delay; allow resources to come up and settle.
++ * Delay is required for SoC (early init).
++ */
+ mdelay(2);
}
/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
-@@ -122,8 +91,11 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -122,51 +217,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
val |= BCMA_CHIPCTL_4331_EXTPA_EN;
if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
@@ -230,7 +800,11 @@
val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
}
bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
-@@ -134,26 +106,38 @@ void bcma_pmu_workarounds(struct bcma_dr
+ }
+
+-void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
++static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+ {
struct bcma_bus *bus = cc->core->bus;
switch (bus->chipinfo.id) {
@@ -240,7 +814,7 @@
+ /* enable 12 mA drive strenth for 4313 and set chipControl
+ register bit 1 */
+ bcma_chipco_chipctl_maskset(cc, 0,
-+ BCMA_CCTRL_4313_12MA_LED_DRIVE,
++ ~BCMA_CCTRL_4313_12MA_LED_DRIVE,
+ BCMA_CCTRL_4313_12MA_LED_DRIVE);
break;
- case 0x4331:
@@ -260,15 +834,15 @@
- "implemented\n");
- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
+ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
-+ BCMA_CCTRL_43224_GPIO_TOGGLE,
++ ~BCMA_CCTRL_43224_GPIO_TOGGLE,
+ BCMA_CCTRL_43224_GPIO_TOGGLE);
+ bcma_chipco_chipctl_maskset(cc, 0,
-+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
++ ~BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
} else {
- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+ bcma_chipco_chipctl_maskset(cc, 0,
-+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
++ ~BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
}
break;
@@ -282,7 +856,11 @@
}
}
-@@ -164,8 +148,8 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+-void bcma_pmu_init(struct bcma_drv_cc *cc)
++void bcma_pmu_early_init(struct bcma_drv_cc *cc)
+ {
+ u32 pmucap;
+
pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
@@ -290,23 +868,29 @@
- pmucap);
+ bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
+ cc->pmu.rev, pmucap);
++}
++void bcma_pmu_init(struct bcma_drv_cc *cc)
++{
if (cc->pmu.rev == 1)
bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
-@@ -174,12 +158,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ ~BCMA_CC_PMU_CTL_NOILPONW);
+@@ -174,37 +287,48 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
BCMA_CC_PMU_CTL_NOILPONW);
- if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
- pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
-
-- bcma_pmu_pll_init(cc);
+ bcma_pmu_pll_init(cc);
bcma_pmu_resources_init(cc);
- bcma_pmu_swreg_init(cc);
bcma_pmu_workarounds(cc);
}
-@@ -188,23 +167,22 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc)
+ {
struct bcma_bus *bus = cc->core->bus;
switch (bus->chipinfo.id) {
@@ -317,21 +901,37 @@
- case 0x5357:
- case 0x4749:
- case 53572:
++ case BCMA_CHIP_ID_BCM4313:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43421:
++ case BCMA_CHIP_ID_BCM43428:
++ case BCMA_CHIP_ID_BCM43431:
+ case BCMA_CHIP_ID_BCM4716:
-+ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM47162:
-+ case BCMA_CHIP_ID_BCM4313:
-+ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM53572:
++ case BCMA_CHIP_ID_BCM6362:
/* always 20Mhz */
return 20000 * 1000;
- case 0x5356:
- case 0x5300:
-+ case BCMA_CHIP_ID_BCM5356:
+ case BCMA_CHIP_ID_BCM4706:
++ case BCMA_CHIP_ID_BCM5356:
/* always 25Mhz */
return 25000 * 1000;
++ case BCMA_CHIP_ID_BCM43460:
++ case BCMA_CHIP_ID_BCM4352:
++ case BCMA_CHIP_ID_BCM4360:
++ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++ return 40000 * 1000;
++ else
++ return 20000 * 1000;
default:
- pr_warn("No ALP clock specified for %04X device, "
- "pmu rev. %d, using default %d Hz\n",
@@ -341,7 +941,16 @@
}
return BCMA_CC_PMU_ALP_CLOCK;
}
-@@ -221,7 +199,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -212,7 +336,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+ /* Find the output of the "m" pll divider given pll controls that start with
+ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
+ */
+-static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++static u32 bcma_pmu_pll_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+ {
+ u32 tmp, div, ndiv, p1, p2, fc;
+ struct bcma_bus *bus = cc->core->bus;
+@@ -221,7 +345,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
BUG_ON(!m || m > 4);
@@ -351,11 +960,19 @@
/* Detect failure in clock setting */
tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
if (tmp & 0x40000)
-@@ -247,33 +226,62 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -240,60 +365,96 @@ static u32 bcma_pmu_clock(struct bcma_dr
+ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
+
+ /* Do calculation in Mhz */
+- fc = bcma_pmu_alp_clock(cc) / 1000000;
++ fc = bcma_pmu_get_alp_clock(cc) / 1000000;
+ fc = (p1 * ndiv * fc) / p2;
+
+ /* Return clock in Hertz */
return (fc / div) * 1000000;
}
-+static u32 bcma_pmu_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+{
+ u32 tmp, ndiv, p1div, p2div;
+ u32 clock;
@@ -386,7 +1003,8 @@
+}
+
/* query bus clock frequency for PMU-enabled chipcommon */
- u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
@@ -394,40 +1012,51 @@
- case 0x4716:
- case 0x4748:
- case 47162:
-+ case BCMA_CHIP_ID_BCM4716:
-+ case BCMA_CHIP_ID_BCM4748:
-+ case BCMA_CHIP_ID_BCM47162:
- return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
- BCMA_CC_PMU5_MAINPLL_SSB);
+- return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
- case 0x5356:
-+ case BCMA_CHIP_ID_BCM5356:
- return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
- BCMA_CC_PMU5_MAINPLL_SSB);
+- return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
- case 0x5357:
- case 0x4749:
-+ case BCMA_CHIP_ID_BCM5357:
-+ case BCMA_CHIP_ID_BCM4749:
- return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
- BCMA_CC_PMU5_MAINPLL_SSB);
+- return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
- case 0x5300:
- return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
- BCMA_CC_PMU5_MAINPLL_SSB);
- case 53572:
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ case BCMA_CHIP_ID_BCM47162:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM5356:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
+ case BCMA_CHIP_ID_BCM4706:
-+ return bcma_pmu_clock_bcm4706(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
-+ BCMA_CC_PMU5_MAINPLL_SSB);
++ return bcma_pmu_pll_clock_bcm4706(cc,
++ BCMA_CC_PMU4706_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
+ case BCMA_CHIP_ID_BCM53572:
return 75000000;
default:
- pr_warn("No backplane clock specified for %04X device, "
- "pmu rev. %d, using default %d Hz\n",
- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
-+ bcma_warn(bus, "No backplane clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
++ bcma_warn(bus, "No bus clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
}
return BCMA_CC_PMU_HT_CLOCK;
}
-@@ -283,17 +291,21 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
+
+ /* query cpu clock frequency for PMU-enabled chipcommon */
+-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
@@ -435,12 +1064,13 @@
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572)
return 300000000;
++ /* New PMUs can have different clock for bus and CPU */
if (cc->pmu.rev >= 5) {
u32 pll;
switch (bus->chipinfo.id) {
- case 0x5356:
+ case BCMA_CHIP_ID_BCM4706:
-+ return bcma_pmu_clock_bcm4706(cc,
++ return bcma_pmu_pll_clock_bcm4706(cc,
+ BCMA_CC_PMU4706_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_CPU);
+ case BCMA_CHIP_ID_BCM5356:
@@ -453,17 +1083,19 @@
pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
break;
default:
-@@ -301,10 +313,188 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -301,10 +462,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
break;
}
- /* TODO: if (bus->chipinfo.id == 0x5300)
- return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
- return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
- }
-
- return bcma_pmu_get_clockcontrol(cc);
- }
+- return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
++ return bcma_pmu_pll_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
++ }
++
++ /* On old PMUs CPU has the same clock as the bus */
++ return bcma_pmu_get_bus_clock(cc);
++}
+
+static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
+ u32 value)
@@ -508,7 +1140,7 @@
+ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4331:
@@ -529,7 +1161,7 @@
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 0x03000a08);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM43224:
@@ -562,7 +1194,7 @@
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4716:
@@ -596,7 +1228,7 @@
+ 0x88888815);
+ }
+
-+ tmp = 3 << 9;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ break;
+
+ case BCMA_CHIP_ID_BCM43227:
@@ -632,17 +1264,18 @@
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+ default:
+ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+ bus->chipinfo.id);
+ break;
-+ }
-+
+ }
+
+- return bcma_pmu_get_clockcontrol(cc);
+ tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
+ bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
-+}
+ }
+EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
--- /dev/null
+++ b/drivers/bcma/driver_gmac_cmn.c
@@ -661,6 +1294,123 @@
+{
+ mutex_init(&gc->phy_mutex);
+}
+--- /dev/null
++++ b/drivers/bcma/driver_gpio.c
+@@ -0,0 +1,114 @@
++/*
++ * Broadcom specific AMBA
++ * GPIO driver
++ *
++ * Copyright 2011, Broadcom Corporation
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/gpio.h>
++#include <linux/export.h>
++#include <linux/bcma/bcma.h>
++
++#include "bcma_private.h"
++
++static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
++{
++ return container_of(chip, struct bcma_drv_cc, gpio);
++}
++
++static int bcma_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ return !!bcma_chipco_gpio_in(cc, 1 << gpio);
++}
++
++static void bcma_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int bcma_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_outen(cc, 1 << gpio, 0);
++ return 0;
++}
++
++static int bcma_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_outen(cc, 1 << gpio, 1 << gpio);
++ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++ return 0;
++}
++
++static int bcma_gpio_request(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_control(cc, 1 << gpio, 0);
++ /* clear pulldown */
++ bcma_chipco_gpio_pulldown(cc, 1 << gpio, 0);
++ /* Set pullup */
++ bcma_chipco_gpio_pullup(cc, 1 << gpio, 1 << gpio);
++
++ return 0;
++}
++
++static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ /* clear pullup */
++ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
++}
++
++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ return bcma_core_irq(cc->core);
++ else
++ return -EINVAL;
++}
++
++int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++ struct gpio_chip *chip = &cc->gpio;
++
++ chip->label = "bcma_gpio";
++ chip->owner = THIS_MODULE;
++ chip->request = bcma_gpio_request;
++ chip->free = bcma_gpio_free;
++ chip->get = bcma_gpio_get_value;
++ chip->set = bcma_gpio_set_value;
++ chip->direction_input = bcma_gpio_direction_input;
++ chip->direction_output = bcma_gpio_direction_output;
++ chip->to_irq = bcma_gpio_to_irq;
++ chip->ngpio = 16;
++ /* There is just one SoC in one device and its GPIO addresses should be
++ * deterministic to address them more easily. The other buses could get
++ * a random base number. */
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ chip->base = 0;
++ else
++ chip->base = -1;
++
++ return gpiochip_add(chip);
++}
++
++int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return gpiochip_remove(&cc->gpio);
++}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -22,15 +22,15 @@
@@ -683,27 +1433,144 @@
dev->bus->chipinfo.pkg == 11 &&
dev->id.id == BCMA_CORE_USB20_HOST;
}
-@@ -143,8 +143,8 @@ static void bcma_core_mips_set_irq(struc
+@@ -74,28 +74,41 @@ static u32 bcma_core_mips_irqflag(struct
+ return dev->core_index;
+ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+
+- return flag & 0x1F;
++ if (flag)
++ return flag & 0x1F;
++ else
++ return 0x3f;
+ }
+
+ /* Get the MIPS IRQ assignment for a specified device.
+ * If unassigned, 0 is returned.
++ * If disabled, 5 is returned.
++ * If not supported, 6 is returned.
+ */
+-unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
+ unsigned int irq;
+
+ irqflag = bcma_core_mips_irqflag(dev);
++ if (irqflag == 0x3f)
++ return 6;
+
+- for (irq = 1; irq <= 4; irq++)
++ for (irq = 0; irq <= 4; irq++)
+ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
+ (1 << irqflag))
+ return irq;
+
+- return 0;
++ return 5;
++}
++
++unsigned int bcma_core_irq(struct bcma_device *dev)
++{
++ unsigned int mips_irq = bcma_core_mips_irq(dev);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
+ }
+-EXPORT_SYMBOL(bcma_core_mips_irq);
++EXPORT_SYMBOL(bcma_core_irq);
+
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+@@ -114,8 +127,8 @@ static void bcma_core_mips_set_irq(struc
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
+ ~(1 << irqflag));
+- else
+- bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
++ else if (oldirq != 5)
++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
+
+ /* assign the new one */
+ if (irq == 0) {
+@@ -123,17 +136,17 @@ static void bcma_core_mips_set_irq(struc
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
+ (1 << irqflag));
+ } else {
+- u32 oldirqflag = bcma_read32(mdev,
+- BCMA_MIPS_MIPS74K_INTMASK(irq));
+- if (oldirqflag) {
++ u32 irqinitmask = bcma_read32(mdev,
++ BCMA_MIPS_MIPS74K_INTMASK(irq));
++ if (irqinitmask) {
+ struct bcma_device *core;
+
+ /* backplane irq line is in use, find out who uses
+ * it and set user to irq 0
+ */
+- list_for_each_entry_reverse(core, &bus->cores, list) {
++ list_for_each_entry(core, &bus->cores, list) {
+ if ((1 << bcma_core_mips_irqflag(core)) ==
+- oldirqflag) {
++ irqinitmask) {
+ bcma_core_mips_set_irq(core, 0);
+ break;
+ }
+@@ -143,15 +156,31 @@ static void bcma_core_mips_set_irq(struc
1 << irqflag);
}
- pr_info("set_irq: core 0x%04x, irq %d => %d\n",
- dev->id.id, oldirq + 2, irq + 2);
-+ bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n",
-+ dev->id.id, oldirq + 2, irq + 2);
++ bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2);
++}
++
++static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq,
++ u16 coreid, u8 unit)
++{
++ struct bcma_device *core;
++
++ core = bcma_find_core_unit(bus, coreid, unit);
++ if (!core) {
++ bcma_warn(bus,
++ "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n",
++ coreid, unit);
++ return;
++ }
++
++ bcma_core_mips_set_irq(core, irq);
}
static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
-@@ -173,7 +173,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+ {
+ int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
++ printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+ for (i = 0; i <= 6; i++)
+ printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
+ printk("\n");
+@@ -161,7 +190,7 @@ static void bcma_core_mips_dump_irq(stru
+ {
+ struct bcma_device *core;
+
+- list_for_each_entry_reverse(core, &bus->cores, list) {
++ list_for_each_entry(core, &bus->cores, list) {
+ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
+ }
+ }
+@@ -171,9 +200,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+ struct bcma_bus *bus = mcore->core->bus;
+
if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
- return bcma_pmu_get_clockcpu(&bus->drv_cc);
+- return bcma_pmu_get_clockcpu(&bus->drv_cc);
++ return bcma_pmu_get_cpu_clock(&bus->drv_cc);
- pr_err("No PMU available, need this to get the cpu clock\n");
+ bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
return 0;
}
EXPORT_SYMBOL(bcma_cpu_clock);
-@@ -185,10 +185,10 @@ static void bcma_core_mips_flash_detect(
+@@ -185,10 +214,10 @@ static void bcma_core_mips_flash_detect(
switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
case BCMA_CC_FLASHT_STSER:
case BCMA_CC_FLASHT_ATSER:
@@ -716,33 +1583,151 @@
bus->drv_cc.pflash.window = 0x1c000000;
bus->drv_cc.pflash.window_size = 0x02000000;
-@@ -199,7 +199,7 @@ static void bcma_core_mips_flash_detect(
+@@ -199,7 +228,46 @@ static void bcma_core_mips_flash_detect(
bus->drv_cc.pflash.buswidth = 2;
break;
default:
- pr_err("flash not supported.\n");
+ bcma_err(bus, "flash not supported.\n");
++ }
++}
++
++void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
++{
++ struct bcma_bus *bus = mcore->core->bus;
++
++ if (mcore->early_setup_done)
++ return;
++
++ bcma_chipco_serial_init(&bus->drv_cc);
++ bcma_core_mips_flash_detect(mcore);
++
++ mcore->early_setup_done = true;
++}
++
++static void bcma_fix_i2s_irqflag(struct bcma_bus *bus)
++{
++ struct bcma_device *cpu, *pcie, *i2s;
++
++ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK)
++ * (IRQ flags > 7 are ignored when setting the interrupt masks)
++ */
++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 &&
++ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748)
++ return;
++
++ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ pcie = bcma_find_core(bus, BCMA_CORE_PCIE);
++ i2s = bcma_find_core(bus, BCMA_CORE_I2S);
++ if (cpu && pcie && i2s &&
++ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) {
++ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87);
++ bcma_debug(bus,
++ "Moved i2s interrupt to oob line 7 instead of 8\n");
}
}
-@@ -209,7 +209,7 @@ void bcma_core_mips_init(struct bcma_drv
+@@ -209,48 +277,59 @@ void bcma_core_mips_init(struct bcma_drv
struct bcma_device *core;
bus = mcore->core->bus;
- pr_info("Initializing MIPS core...\n");
-+ bcma_info(bus, "Initializing MIPS core...\n");
++ if (mcore->setup_done)
++ return;
++
++ bcma_debug(bus, "Initializing MIPS core...\n");
- if (!mcore->setup_done)
- mcore->assigned_irqs = 1;
-@@ -244,7 +244,7 @@ void bcma_core_mips_init(struct bcma_drv
- break;
+- if (!mcore->setup_done)
+- mcore->assigned_irqs = 1;
++ bcma_core_mips_early_init(mcore);
+
+- /* Assign IRQs to all cores on the bus */
+- list_for_each_entry_reverse(core, &bus->cores, list) {
+- int mips_irq;
+- if (core->irq)
+- continue;
+-
+- mips_irq = bcma_core_mips_irq(core);
+- if (mips_irq > 4)
+- core->irq = 0;
+- else
+- core->irq = mips_irq + 2;
+- if (core->irq > 5)
+- continue;
+- switch (core->id.id) {
+- case BCMA_CORE_PCI:
+- case BCMA_CORE_PCIE:
+- case BCMA_CORE_ETHERNET:
+- case BCMA_CORE_ETHERNET_GBIT:
+- case BCMA_CORE_MAC_GBIT:
+- case BCMA_CORE_80211:
+- case BCMA_CORE_USB20_HOST:
+- /* These devices get their own IRQ line if available,
+- * the rest goes on IRQ0
+- */
+- if (mcore->assigned_irqs <= 4)
+- bcma_core_mips_set_irq(core,
+- mcore->assigned_irqs++);
+- break;
++ bcma_fix_i2s_irqflag(bus);
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++ break;
++ case BCMA_CHIP_ID_BCM5356:
++ case BCMA_CHIP_ID_BCM47162:
++ case BCMA_CHIP_ID_BCM53572:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ break;
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++ break;
++ case BCMA_CHIP_ID_BCM4706:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT,
++ 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1);
++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON,
++ 0);
++ break;
++ default:
++ list_for_each_entry(core, &bus->cores, list) {
++ core->irq = bcma_core_irq(core);
}
++ bcma_err(bus,
++ "Unknown device (0x%x) found, can not configure IRQs\n",
++ bus->chipinfo.id);
}
- pr_info("IRQ reconfiguration done\n");
-+ bcma_info(bus, "IRQ reconfiguration done\n");
++ bcma_debug(bus, "IRQ reconfiguration done\n");
bcma_core_mips_dump_irq(bus);
- if (mcore->setup_done)
+- if (mcore->setup_done)
+- return;
+-
+- bcma_chipco_serial_init(&bus->drv_cc);
+- bcma_core_mips_flash_detect(mcore);
+ mcore->setup_done = true;
+ }
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -2,8 +2,9 @@
@@ -756,7 +1741,7 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -16,40 +17,39 @@
+@@ -16,120 +17,124 @@
* R/W ops.
**************************************************/
@@ -812,9 +1797,10 @@
+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
break;
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
-@@ -57,79 +57,84 @@ static void bcma_pcie_mdio_set_phy(struc
+ }
static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
{
@@ -868,7 +1854,8 @@
+ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA);
break;
}
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
- pcicore_write32(pc, mdio_control, 0);
+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
@@ -923,7 +1910,8 @@
+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
break;
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
- pcicore_write32(pc, mdio_control, 0);
+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
@@ -1103,7 +2091,7 @@
+EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
-@@ -2,13 +2,592 @@
+@@ -2,13 +2,616 @@
* Broadcom specific AMBA
* PCI Core in hostmode
*
@@ -1140,11 +2128,6 @@
+ chipid_top != 0x5300)
+ return false;
+
-+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
-+ bcma_info(bus, "This PCI core is disabled and not working\n");
-+ return false;
-+ }
-+
+ bcma_core_enable(pc->core, 0);
+
+ return !mips_busprobe32(tmp, pc->core->io_addr);
@@ -1189,13 +2172,11 @@
+out:
+ return addr;
+}
-
--void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++
+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev,
+ unsigned int func, unsigned int off,
+ void *buf, int len)
- {
-- pr_err("No support for PCI core in hostmode yet\n");
++{
+ int err = -EINVAL;
+ u32 addr, val;
+ void __iomem *mmio = 0;
@@ -1206,19 +2187,19 @@
+ if (dev == 0) {
+ /* we support only two functions on device 0 */
+ if (func > 1)
-+ return -EINVAL;
++ goto out;
+
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+ if (off >= PCI_CONFIG_SPACE_SIZE) {
+ addr = (func << 12);
-+ addr |= (off & 0x0FFF);
++ addr |= (off & 0x0FFC);
+ val = bcma_pcie_read_config(pc, addr);
+ } else {
+ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
-+ addr |= (off & 0xfc);
++ addr |= (off & 0xFC);
+ val = pcicore_read32(pc, addr);
+ }
+ } else {
@@ -1231,11 +2212,9 @@
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
-+ val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
-+
-+ val = readl(mmio);
+ }
+ val >>= (8 * (off & 3));
+
@@ -1257,13 +2236,15 @@
+out:
+ return err;
+}
-+
+
+-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
+ unsigned int func, unsigned int off,
+ const void *buf, int len)
-+{
+ {
+- pr_err("No support for PCI core in hostmode yet\n");
+ int err = -EINVAL;
-+ u32 addr = 0, val = 0;
++ u32 addr, val;
+ void __iomem *mmio = 0;
+ u16 chipid = pc->core->bus->chipinfo.id;
+
@@ -1271,16 +2252,22 @@
+ if (unlikely(len != 1 && len != 2 && len != 4))
+ goto out;
+ if (dev == 0) {
++ /* we support only two functions on device 0 */
++ if (func > 1)
++ goto out;
++
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
-+ if (off < PCI_CONFIG_SPACE_SIZE) {
-+ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
++ if (off >= PCI_CONFIG_SPACE_SIZE) {
++ addr = (func << 12);
++ addr |= (off & 0x0FFC);
++ val = bcma_pcie_read_config(pc, addr);
++ } else {
++ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
-+ addr |= (off & 0xfc);
-+ mmio = ioremap_nocache(addr, sizeof(val));
-+ if (!mmio)
-+ goto out;
++ addr |= (off & 0xFC);
++ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ addr = bcma_get_cfgspace_addr(pc, dev, func, off);
@@ -1292,19 +2279,17 @@
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
-+ val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
+ }
+
+ switch (len) {
+ case 1:
-+ val = readl(mmio);
+ val &= ~(0xFF << (8 * (off & 3)));
+ val |= *((const u8 *)buf) << (8 * (off & 3));
+ break;
+ case 2:
-+ val = readl(mmio);
+ val &= ~(0xFFFF << (8 * (off & 3)));
+ val |= *((const u16 *)buf) << (8 * (off & 3));
+ break;
@@ -1312,13 +2297,14 @@
+ val = *((const u32 *)buf);
+ break;
+ }
-+ if (dev == 0 && !addr) {
++ if (dev == 0) {
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
-+ addr = (func << 12);
-+ addr |= (off & 0x0FFF);
-+ bcma_pcie_write_config(pc, addr, val);
++ if (off >= PCI_CONFIG_SPACE_SIZE)
++ bcma_pcie_write_config(pc, addr, val);
++ else
++ pcicore_write32(pc, addr, val);
+ } else {
+ writel(val, mmio);
+
@@ -1389,7 +2375,7 @@
+ /* check for Header type 0 */
+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
+ sizeof(u8));
-+ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
++ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL)
+ return cap_ptr;
+
+ /* check if the capability pointer field exists */
@@ -1503,12 +2489,19 @@
+
+ bcma_info(bus, "PCIEcore in host mode found\n");
+
++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
++ bcma_info(bus, "This PCIE core is disabled and not working\n");
++ return;
++ }
++
+ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
+ if (!pc_host) {
+ bcma_err(bus, "can not allocate memory");
+ return;
+ }
+
++ spin_lock_init(&pc_host->cfgspace_lock);
++
+ pc->host_controller = pc_host;
+ pc_host->pci_controller.io_resource = &pc_host->io_resource;
+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
@@ -1532,9 +2525,9 @@
+ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
+
+ /* Reset RC */
-+ udelay(3000);
++ usleep_range(3000, 5000);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
-+ udelay(1000);
++ msleep(50);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+ BCMA_CORE_PCI_CTL_RST_OE);
+
@@ -1559,6 +2552,8 @@
+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
+ BCMA_SOC_PCI_MEM_SZ - 1;
++ pc_host->io_resource.start = 0x100;
++ pc_host->io_resource.end = 0x47F;
+ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+ tmp | BCMA_SOC_PCI_MEM);
@@ -1566,6 +2561,8 @@
+ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
+ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
+ BCMA_SOC_PCI_MEM_SZ - 1;
++ pc_host->io_resource.start = 0x480;
++ pc_host->io_resource.end = 0x7FF;
+ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
+ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
@@ -1588,10 +2585,21 @@
+ * before issuing configuration requests to PCI Express
+ * devices.
+ */
-+ udelay(100000);
++ msleep(100);
+
+ bcma_core_pci_enable_crs(pc);
+
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
++ u16 val16;
++ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ val16 |= (2 << 5); /* Max payload size of 512 */
++ val16 |= (2 << 12); /* MRRS 512 */
++ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ }
++
+ /* Enable PCI bridge BAR0 memory & master access */
+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
@@ -1608,7 +2616,7 @@
+ set_io_port_base(pc_host->pci_controller.io_map_base);
+ /* Give some time to the PCI controller to configure itself with the new
+ * values. Not waiting at this point causes crashes of the machine. */
-+ mdelay(10);
++ usleep_range(10000, 15000);
+ register_pci_controller(&pc_host->pci_controller);
+ return;
+}
@@ -1641,7 +2649,7 @@
+static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
+{
+ struct resource *res;
-+ int pos;
++ int pos, err;
+
+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
+ /* This is not a device on the PCI-core bridge. */
@@ -1654,8 +2662,12 @@
+
+ for (pos = 0; pos < 6; pos++) {
+ res = &dev->resource[pos];
-+ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM))
-+ pci_assign_resource(dev, pos);
++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) {
++ err = pci_assign_resource(dev, pos);
++ if (err)
++ pr_err("PCI: Problem fixing up the addresses on %s\n",
++ pci_name(dev));
++ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
@@ -1676,7 +2688,7 @@
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
-+ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ dev->irq = bcma_core_irq(pc_host->pdev->core);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ return 0;
@@ -1695,7 +2707,7 @@
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
-+ return bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ return bcma_core_irq(pc_host->pdev->core);
}
+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
@@ -1709,7 +2721,39 @@
}
/* Provides access to the requested core. Returns base offset that has to be
-@@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci
+@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct
+ }
+
+ #ifdef CONFIG_BCMA_BLOCKIO
+-void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
+- size_t count, u16 offset, u8 reg_width)
++static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
+ {
+ void __iomem *addr = core->bus->mmio + offset;
+ if (core->bus->mapped_core != core)
+@@ -100,8 +100,9 @@ void bcma_host_pci_block_read(struct bcm
+ }
+ }
+
+-void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
+- size_t count, u16 offset, u8 reg_width)
++static void bcma_host_pci_block_write(struct bcma_device *core,
++ const void *buffer, size_t count,
++ u16 offset, u8 reg_width)
+ {
+ void __iomem *addr = core->bus->mmio + offset;
+ if (core->bus->mapped_core != core)
+@@ -139,7 +140,7 @@ static void bcma_host_pci_awrite32(struc
+ iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+ }
+
+-const struct bcma_host_ops bcma_host_pci_ops = {
++static const struct bcma_host_ops bcma_host_pci_ops = {
+ .read8 = bcma_host_pci_read8,
+ .read16 = bcma_host_pci_read16,
+ .read32 = bcma_host_pci_read32,
+@@ -154,8 +155,8 @@ const struct bcma_host_ops bcma_host_pci
.awrite32 = bcma_host_pci_awrite32,
};
@@ -1720,7 +2764,7 @@
{
struct bcma_bus *bus;
int err = -ENOMEM;
-@@ -188,7 +188,7 @@ static int bcma_host_pci_probe(struct pc
+@@ -188,7 +189,7 @@ static int bcma_host_pci_probe(struct pc
/* SSB needed additional powering up, do we have any AMBA PCI cards? */
if (!pci_is_pcie(dev))
@@ -1729,7 +2773,7 @@
/* Map MMIO */
err = -ENOMEM;
-@@ -201,6 +201,9 @@ static int bcma_host_pci_probe(struct pc
+@@ -201,6 +202,9 @@ static int bcma_host_pci_probe(struct pc
bus->hosttype = BCMA_HOSTTYPE_PCI;
bus->ops = &bcma_host_pci_ops;
@@ -1739,7 +2783,7 @@
/* Register */
err = bcma_bus_register(bus);
if (err)
-@@ -222,7 +225,7 @@ err_kfree_bus:
+@@ -222,7 +226,7 @@ err_kfree_bus:
return err;
}
@@ -1748,7 +2792,26 @@
{
struct bcma_bus *bus = pci_get_drvdata(dev);
-@@ -265,6 +268,7 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct
+ pci_set_drvdata(dev, NULL);
+ }
+
+-#ifdef CONFIG_PM
++#ifdef CONFIG_PM_SLEEP
+ static int bcma_host_pci_suspend(struct device *dev)
+ {
+ struct pci_dev *pdev = to_pci_dev(dev);
+@@ -257,17 +261,21 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+ bcma_host_pci_resume);
+ #define BCMA_PM_OPS (&bcma_pm_ops)
+
+-#else /* CONFIG_PM */
++#else /* CONFIG_PM_SLEEP */
+
+ #define BCMA_PM_OPS NULL
+
+-#endif /* CONFIG_PM */
++#endif /* CONFIG_PM_SLEEP */
static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
@@ -1756,7 +2819,13 @@
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
-@@ -277,7 +281,7 @@ static struct pci_driver bcma_pci_bridge
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+ };
+@@ -277,7 +285,7 @@ static struct pci_driver bcma_pci_bridge
.name = "bcma-pci-bridge",
.id_table = bcma_pci_bridge_tbl,
.probe = bcma_host_pci_probe,
@@ -1765,6 +2834,17 @@
.driver.pm = BCMA_PM_OPS,
};
+--- a/drivers/bcma/host_soc.c
++++ b/drivers/bcma/host_soc.c
+@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc
+ writel(value, core->io_wrap + offset);
+ }
+
+-const struct bcma_host_ops bcma_host_soc_ops = {
++static const struct bcma_host_ops bcma_host_soc_ops = {
+ .read8 = bcma_host_soc_read8,
+ .read16 = bcma_host_soc_read16,
+ .read32 = bcma_host_soc_read32,
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -13,6 +13,12 @@
@@ -1796,15 +2876,46 @@
{
struct bcma_device *core;
-@@ -65,6 +78,7 @@ static struct bcma_device *bcma_find_cor
+@@ -65,6 +78,38 @@ static struct bcma_device *bcma_find_cor
}
return NULL;
}
+EXPORT_SYMBOL_GPL(bcma_find_core);
++
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++ u8 unit)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ if (core->id.id == coreid && core->core_unit == unit)
++ return core;
++ }
++ return NULL;
++}
++
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
static void bcma_release_core_dev(struct device *dev)
{
-@@ -84,16 +98,18 @@ static int bcma_register_cores(struct bc
+@@ -84,16 +129,23 @@ static int bcma_register_cores(struct bc
list_for_each_entry(core, &bus->cores, list) {
/* We support that cores ourself */
switch (core->id.id) {
@@ -1817,6 +2928,11 @@
continue;
}
++ /* Only first GMAC core on BCM4706 is connected and working */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ core->core_unit > 0)
++ continue;
++
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
@@ -1824,7 +2940,7 @@
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
-@@ -111,8 +127,9 @@ static int bcma_register_cores(struct bc
+@@ -111,41 +163,75 @@ static int bcma_register_cores(struct bc
err = device_register(&core->dev);
if (err) {
@@ -1836,8 +2952,37 @@
continue;
}
core->dev_registered = true;
-@@ -132,20 +149,24 @@ static void bcma_unregister_cores(struct
+ dev_id++;
+ }
+
++ err = bcma_gpio_init(&bus->drv_cc);
++ if (err == -ENOTSUPP)
++ bcma_debug(bus, "GPIO driver not activated\n");
++ else if (err)
++ bcma_err(bus, "Error registering GPIO driver: %i\n", err);
++
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++ err = bcma_chipco_watchdog_register(&bus->drv_cc);
++ if (err)
++ bcma_err(bus, "Error registering watchdog driver\n");
++ }
++
+ return 0;
+ }
+
+ static void bcma_unregister_cores(struct bcma_bus *bus)
+ {
+- struct bcma_device *core;
++ struct bcma_device *core, *tmp;
+
+- list_for_each_entry(core, &bus->cores, list) {
++ list_for_each_entry_safe(core, tmp, &bus->cores, list) {
++ list_del(&core->list);
+ if (core->dev_registered)
+ device_unregister(&core->dev);
}
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
++ platform_device_unregister(bus->drv_cc.watchdog);
}
-int bcma_bus_register(struct bcma_bus *bus)
@@ -1858,31 +3003,58 @@
return -1;
}
++ /* Early init CC core */
++ core = bcma_find_core(bus, bcma_cc_core_id(bus));
++ if (core) {
++ bus->drv_cc.core = core;
++ bcma_core_chipcommon_early_init(&bus->drv_cc);
++ }
++
++ /* Try to get SPROM */
++ err = bcma_sprom_get(bus);
++ if (err == -ENOENT) {
++ bcma_err(bus, "No SPROM available\n");
++ } else if (err)
++ bcma_err(bus, "Failed to get SPROM: %d\n", err);
++
/* Init CC core */
- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+ core = bcma_find_core(bus, bcma_cc_core_id(bus));
if (core) {
bus->drv_cc.core = core;
bcma_core_chipcommon_init(&bus->drv_cc);
-@@ -165,17 +186,24 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_core_pci_init(&bus->drv_pci);
+@@ -159,30 +245,54 @@ int bcma_bus_register(struct bcma_bus *b
}
+ /* Init PCIE core */
+- core = bcma_find_core(bus, BCMA_CORE_PCIE);
++ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0);
+ if (core) {
+- bus->drv_pci.core = core;
+- bcma_core_pci_init(&bus->drv_pci);
++ bus->drv_pci[0].core = core;
++ bcma_core_pci_init(&bus->drv_pci[0]);
+ }
+
+- /* Try to get SPROM */
+- err = bcma_sprom_get(bus);
+- if (err == -ENOENT) {
+- pr_err("No SPROM available\n");
+- } else if (err)
+- pr_err("Failed to get SPROM: %d\n", err);
++ /* Init PCIE core */
++ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1);
++ if (core) {
++ bus->drv_pci[1].core = core;
++ bcma_core_pci_init(&bus->drv_pci[1]);
++ }
++
+ /* Init GBIT MAC COMMON core */
+ core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
+ if (core) {
+ bus->drv_gmac_cmn.core = core;
+ bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
+ }
-+
- /* Try to get SPROM */
- err = bcma_sprom_get(bus);
- if (err == -ENOENT) {
-- pr_err("No SPROM available\n");
-+ bcma_err(bus, "No SPROM available\n");
- } else if (err)
-- pr_err("Failed to get SPROM: %d\n", err);
-+ bcma_err(bus, "Failed to get SPROM: %d\n", err);
/* Register found cores */
bcma_register_cores(bus);
@@ -1892,7 +3064,31 @@
return 0;
}
-@@ -196,14 +224,14 @@ int __init bcma_bus_early_register(struc
+
+ void bcma_bus_unregister(struct bcma_bus *bus)
+ {
++ struct bcma_device *cores[3];
++ int err;
++
++ err = bcma_gpio_unregister(&bus->drv_cc);
++ if (err == -EBUSY)
++ bcma_err(bus, "Some GPIOs are still in use.\n");
++ else if (err)
++ bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
++
++ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
++ cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
++
+ bcma_unregister_cores(bus);
++
++ kfree(cores[2]);
++ kfree(cores[1]);
++ kfree(cores[0]);
+ }
+
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+@@ -196,14 +306,14 @@ int __init bcma_bus_early_register(struc
bcma_init_bus(bus);
match.manuf = BCMA_MANUF_BCM;
@@ -1909,7 +3105,7 @@
return -1;
}
-@@ -215,12 +243,12 @@ int __init bcma_bus_early_register(struc
+@@ -215,25 +325,25 @@ int __init bcma_bus_early_register(struc
/* Scan for mips core */
err = bcma_bus_scan_early(bus, &match, core_mips);
if (err) {
@@ -1918,14 +3114,23 @@
return -1;
}
- /* Init CC core */
+- /* Init CC core */
- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ /* Early init CC core */
+ core = bcma_find_core(bus, bcma_cc_core_id(bus));
if (core) {
bus->drv_cc.core = core;
- bcma_core_chipcommon_init(&bus->drv_cc);
-@@ -233,7 +261,7 @@ int __init bcma_bus_early_register(struc
- bcma_core_mips_init(&bus->drv_mips);
+- bcma_core_chipcommon_init(&bus->drv_cc);
++ bcma_core_chipcommon_early_init(&bus->drv_cc);
+ }
+
+- /* Init MIPS core */
++ /* Early init MIPS core */
+ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ if (core) {
+ bus->drv_mips.core = core;
+- bcma_core_mips_init(&bus->drv_mips);
++ bcma_core_mips_early_init(&bus->drv_mips);
}
- pr_info("Early bus registered\n");
@@ -1933,7 +3138,7 @@
return 0;
}
-@@ -259,8 +287,7 @@ int bcma_bus_resume(struct bcma_bus *bus
+@@ -259,8 +369,7 @@ int bcma_bus_resume(struct bcma_bus *bus
struct bcma_device *core;
/* Init CC core */
@@ -1999,8 +3204,12 @@
{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
-@@ -79,16 +86,41 @@ struct bcma_device_id_name bcma_device_n
+@@ -77,18 +84,45 @@ struct bcma_device_id_name bcma_device_n
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
{ BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
{ BCMA_CORE_DEFAULT, "Default" },
};
-const char *bcma_device_name(struct bcma_device_id *id)
@@ -2038,17 +3247,84 @@
+ break;
+ default:
+ return "UNKNOWN";
-+ }
+ }
+
+ for (i = 0; i < size; i++) {
+ if (names[i].id == id->id)
+ return names[i].name;
- }
++ }
+
return "UNKNOWN";
}
-@@ -212,6 +244,17 @@ static struct bcma_device *bcma_find_cor
+@@ -105,19 +139,19 @@ static void bcma_scan_switch_core(struct
+ addr);
+ }
+
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+ }
+
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ (*eromptr)--;
+ }
+
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -127,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ return ent;
+ }
+
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+@@ -143,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent;
+ while (1) {
+@@ -157,7 +191,7 @@ static void bcma_erom_skip_component(str
+ bcma_erom_push_ent(eromptr);
+ }
+
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -167,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct
+ return ent;
+ }
+
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ u32 type, u8 port)
+ {
+ u32 addrl, addrh, sizel, sizeh = 0;
+@@ -212,6 +246,17 @@ static struct bcma_device *bcma_find_cor
return NULL;
}
@@ -2066,7 +3342,7 @@
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
struct bcma_device_id *match, int core_num,
struct bcma_device *core)
-@@ -252,11 +295,15 @@ static int bcma_get_next_core(struct bcm
+@@ -252,11 +297,15 @@ static int bcma_get_next_core(struct bcm
/* check if component is a core at all */
if (wrappers[0] + wrappers[1] == 0) {
@@ -2087,7 +3363,7 @@
}
if (bcma_erom_is_bridge(bus, eromptr)) {
-@@ -286,6 +333,23 @@ static int bcma_get_next_core(struct bcm
+@@ -286,6 +335,23 @@ static int bcma_get_next_core(struct bcm
return -EILSEQ;
}
@@ -2111,7 +3387,7 @@
/* get & parse slave ports */
for (i = 0; i < ports[1]; i++) {
for (j = 0; ; j++) {
-@@ -298,7 +362,7 @@ static int bcma_get_next_core(struct bcm
+@@ -298,7 +364,7 @@ static int bcma_get_next_core(struct bcm
break;
} else {
if (i == 0 && j == 0)
@@ -2120,7 +3396,7 @@
}
}
}
-@@ -353,6 +417,7 @@ static int bcma_get_next_core(struct bcm
+@@ -353,6 +419,7 @@ static int bcma_get_next_core(struct bcm
void bcma_init_bus(struct bcma_bus *bus)
{
s32 tmp;
@@ -2128,7 +3404,7 @@
if (bus->init_done)
return;
-@@ -363,9 +428,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+@@ -363,9 +430,12 @@ void bcma_init_bus(struct bcma_bus *bus)
bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
@@ -2144,15 +3420,28 @@
bus->init_done = true;
}
-@@ -392,6 +460,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -392,9 +462,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
bcma_scan_switch_core(bus, erombase);
while (eromptr < eromend) {
+ struct bcma_device *other_core;
struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
- if (!core)
- return -ENOMEM;
-@@ -414,14 +483,15 @@ int bcma_bus_scan(struct bcma_bus *bus)
+- if (!core)
+- return -ENOMEM;
++ if (!core) {
++ err = -ENOMEM;
++ goto out;
++ }
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+@@ -409,25 +482,28 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ } else if (err == -ESPIPE) {
+ break;
+ }
+- return err;
++ goto out;
+ }
core->core_index = core_num++;
bus->nr_cores++;
@@ -2173,8 +3462,22 @@
+ list_add_tail(&core->list, &bus->cores);
}
++ err = 0;
++out:
if (bus->hosttype == BCMA_HOSTTYPE_SOC)
-@@ -471,13 +541,12 @@ int __init bcma_bus_scan_early(struct bc
+ iounmap(eromptr);
+
+- return 0;
++ return err;
+ }
+
+ int __init bcma_bus_scan_early(struct bcma_bus *bus,
+@@ -467,21 +543,21 @@ int __init bcma_bus_scan_early(struct bc
+ else if (err == -ESPIPE)
+ break;
+ else if (err < 0)
+- return err;
++ goto out;
core->core_index = core_num++;
bus->nr_cores++;
@@ -2193,6 +3496,11 @@
err = 0;
break;
}
+
++out:
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+ iounmap(eromptr);
+
--- a/drivers/bcma/scan.h
+++ b/drivers/bcma/scan.h
@@ -27,7 +27,7 @@
@@ -2215,7 +3523,7 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -14,7 +16,57 @@
+@@ -14,18 +16,68 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
@@ -2274,7 +3582,88 @@
/**************************************************
* R/W ops.
-@@ -124,10 +176,37 @@ static int bcma_sprom_valid(const u16 *s
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -72,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -102,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -124,124 +180,439 @@ static int bcma_sprom_valid(const u16 *s
* SPROM extraction.
**************************************************/
@@ -2304,6 +3693,9 @@
- u16 v;
+ u16 v, o;
int i;
+-
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
@@ -2311,79 +3703,15 @@
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
- SSB_SPROM_REVISION_REV;
-@@ -137,102 +216,378 @@ static void bcma_sprom_extract_r8(struct
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
- bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
-
-- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
-- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
-- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
-- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
--
-- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
-- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
-- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
-- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
--
-- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
-- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
-- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
-- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
--
-- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
-- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
-- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
-- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
--
-- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
-- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
-- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
-- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
--
-- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
--
-- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
--
-- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
++
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
+ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1,
@@ -2641,7 +3969,71 @@
+ case BCMA_CHIP_ID_BCM4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
-+
+
+- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
+- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
+- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
+- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
+-
+- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
+- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
+- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
+- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
+-
+- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
+- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
+- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
+- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
+-
+- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
+- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
+- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
+- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
+-
+- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+-
+- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
+-
+- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+-
+- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+ default:
+ return true;
+ }
@@ -2667,13 +4059,17 @@
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
-+
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+ present = true;
+ break;
-+
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM43428:
++ present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
++ break;
+ default:
+ present = false;
+ break;
@@ -2712,7 +4108,10 @@
- u16 offset;
+ u16 offset = BCMA_CC_SPROM;
u16 *sprom;
- int err = 0;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
if (!bus->drv_cc.core)
return -EOPNOTSUPP;
@@ -2721,7 +4120,11 @@
- return -ENOENT;
+ if (!bcma_sprom_ext_available(bus)) {
+ bool sprom_onchip;
-+
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+ /*
+ * External SPROM takes precedence so check
+ * on-chip OTP only when no external SPROM
@@ -2743,11 +4146,6 @@
+ }
+ }
- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
- GFP_KERNEL);
- if (!sprom)
- return -ENOMEM;
-
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
@@ -2758,25 +4156,59 @@
- * TODO: understand this condition and use it */
- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
- BCMA_CC_SPROM_PCIE6;
+- bcma_sprom_read(bus, offset, sprom);
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
- if (bus->chipinfo.id == 0x4331)
+- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++ kfree(sprom);
++ }
+
+- err = bcma_sprom_valid(sprom);
+- if (err)
+- goto out;
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+- bcma_sprom_extract_r8(bus, sprom);
++ if (err) {
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
++ }
- err = bcma_sprom_valid(sprom);
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -7,6 +7,7 @@
+@@ -7,9 +7,10 @@
#include <linux/bcma/bcma_driver_chipcommon.h>
#include <linux/bcma/bcma_driver_pci.h>
#include <linux/bcma/bcma_driver_mips.h>
+#include <linux/bcma/bcma_driver_gmac_cmn.h>
#include <linux/ssb/ssb.h> /* SPROM sharing */
- #include "bcma_regs.h"
+-#include "bcma_regs.h"
++#include <linux/bcma/bcma_regs.h>
+
+ struct bcma_device;
+ struct bcma_bus;
@@ -26,6 +27,11 @@ struct bcma_chipinfo {
u8 pkg;
};
@@ -2803,12 +4235,21 @@
#define BCMA_CORE_INVALID 0x700
#define BCMA_CORE_CHIPCOMMON 0x800
#define BCMA_CORE_ILINE20 0x801
-@@ -125,6 +138,36 @@ struct bcma_host_ops {
+@@ -121,10 +134,104 @@ struct bcma_host_ops {
+ #define BCMA_CORE_I2S 0x834
+ #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
+ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
+ #define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
+/* Chip IDs of PCIe devices */
+#define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+#define BCMA_CHIP_ID_BCM43224 43224
+#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
@@ -2826,6 +4267,7 @@
+
+/* Chip IDs of SoCs */
+#define BCMA_CHIP_ID_BCM4706 0x5300
++#define BCMA_PKG_ID_BCM4706L 1
+#define BCMA_CHIP_ID_BCM4716 0x4716
+#define BCMA_PKG_ID_BCM4716 8
+#define BCMA_PKG_ID_BCM4717 9
@@ -2835,12 +4277,70 @@
+#define BCMA_CHIP_ID_BCM4749 0x4749
+#define BCMA_CHIP_ID_BCM5356 0x5356
+#define BCMA_CHIP_ID_BCM5357 0x5357
++#define BCMA_PKG_ID_BCM5358 9
++#define BCMA_PKG_ID_BCM47186 10
++#define BCMA_PKG_ID_BCM5357 11
+#define BCMA_CHIP_ID_BCM53572 53572
++#define BCMA_PKG_ID_BCM47188 9
++
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
+
struct bcma_device {
struct bcma_bus *bus;
struct bcma_device_id id;
-@@ -136,8 +179,10 @@ struct bcma_device {
+@@ -136,8 +243,10 @@ struct bcma_device {
bool dev_registered;
u8 core_index;
@@ -2851,7 +4351,7 @@
u32 wrap;
void __iomem *io_addr;
-@@ -175,6 +220,12 @@ int __bcma_driver_register(struct bcma_d
+@@ -175,6 +284,12 @@ int __bcma_driver_register(struct bcma_d
extern void bcma_driver_unregister(struct bcma_driver *drv);
@@ -2864,7 +4364,7 @@
struct bcma_bus {
/* The MMIO area. */
void __iomem *mmio;
-@@ -191,14 +242,18 @@ struct bcma_bus {
+@@ -191,14 +306,18 @@ struct bcma_bus {
struct bcma_chipinfo chipinfo;
@@ -2877,13 +4377,14 @@
+ u8 num;
struct bcma_drv_cc drv_cc;
- struct bcma_drv_pci drv_pci;
+- struct bcma_drv_pci drv_pci;
++ struct bcma_drv_pci drv_pci[2];
struct bcma_drv_mips drv_mips;
+ struct bcma_drv_gmac_cmn drv_gmac_cmn;
/* We decided to share SPROM struct with SSB as long as we do not need
* any hacks for BCMA. This simplifies drivers code. */
-@@ -282,6 +337,7 @@ static inline void bcma_maskset16(struct
+@@ -282,6 +401,7 @@ static inline void bcma_maskset16(struct
bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
}
@@ -2891,9 +4392,44 @@
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+@@ -289,6 +409,7 @@ extern void bcma_core_set_clockmode(stru
+ enum bcma_clkmode clkmode);
+ extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
+ bool on);
++extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset);
+ #define BCMA_DMA_TRANSLATION_MASK 0xC0000000
+ #define BCMA_DMA_TRANSLATION_NONE 0x00000000
+ #define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -56,6 +56,9 @@
+@@ -1,6 +1,9 @@
+ #ifndef LINUX_BCMA_DRIVER_CC_H_
+ #define LINUX_BCMA_DRIVER_CC_H_
+
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
+ /** ChipCommon core registers. **/
+ #define BCMA_CC_ID 0x0000
+ #define BCMA_CC_ID_ID 0x0000FFFF
+@@ -24,7 +27,7 @@
+ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
+ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
+ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+-#define BCMA_CC_FLASHT_NFLASH 0x00000200
++#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */
+ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
+ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
+ #define BCMA_PLLTYPE_NONE 0x00000000
+@@ -45,6 +48,7 @@
+ #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+ #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+ #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
++#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */
+ #define BCMA_CC_CORECTL 0x0008
+ #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+ #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+@@ -56,6 +60,9 @@
#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
@@ -2903,7 +4439,7 @@
#define BCMA_CC_OTPC 0x0014 /* OTP control */
#define BCMA_CC_OTPC_RECWAIT 0xFF000000
#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
-@@ -72,6 +75,8 @@
+@@ -72,6 +79,8 @@
#define BCMA_CC_OTPP_READ 0x40000000
#define BCMA_CC_OTPP_START 0x80000000
#define BCMA_CC_OTPP_BUSY 0x80000000
@@ -2912,7 +4448,7 @@
#define BCMA_CC_IRQSTAT 0x0020
#define BCMA_CC_IRQMASK 0x0024
#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
-@@ -79,6 +84,15 @@
+@@ -79,6 +88,23 @@
#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
@@ -2920,15 +4456,82 @@
+#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2
+#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2
+#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4
++#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001
++#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002
++#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004
++#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008
++#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010
++#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020
+#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */
+#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */
+#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
+#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
+#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
++#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
-@@ -181,6 +195,22 @@
+@@ -108,10 +134,58 @@
+ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
+ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
+ #define BCMA_CC_FLASHCTL 0x0040
++/* Start/busy bit in flashcontrol */
++#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff
++#define BCMA_CC_FLASHCTL_ACTION 0x00000700
++#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
+ #define BCMA_CC_FLASHCTL_START 0x80000000
+ #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
++/* Flashcontrol action + opcodes for ST flashes */
++#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
++#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
++#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
++#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
++#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
++#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */
++#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */
++#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */
++#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */
++#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */
++#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
++#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
++/* Flashcontrol action + opcodes for Atmel flashes */
++#define BCMA_CC_FLASHCTL_AT_READ 0x07e8
++#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2
++#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7
++#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384
++#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387
++#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283
++#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286
++#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288
++#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289
++#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281
++#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250
++#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
++#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
++#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253
++#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255
++#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260
++#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261
++#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
++#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
+ #define BCMA_CC_FLASHADDR 0x0044
+ #define BCMA_CC_FLASHDATA 0x0048
++/* Status register bits for ST flashes */
++#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
++#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
++#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
++#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2
++#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
++/* Status register bits for Atmel flashes */
++#define BCMA_CC_FLASHDATA_AT_READY 0x80
++#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40
++#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38
++#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3
+ #define BCMA_CC_BCAST_ADDR 0x0050
+ #define BCMA_CC_BCAST_DATA 0x0054
+ #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+@@ -181,6 +255,45 @@
#define BCMA_CC_FLASH_CFG 0x0128
#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
#define BCMA_CC_FLASH_WAITCNT 0x012C
@@ -2948,18 +4551,120 @@
+#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004
+#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1
+#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001
++/* Block 0x140 - 0x190 registers are chipset specific */
++#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */
++#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff
++#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */
++#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */
++#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */
++#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */
++/* NAND flash registers for BCM4706 (corerev = 31) */
++#define BCMA_CC_NFLASH_CTL 0x01A0
++#define BCMA_CC_NFLASH_CTL_ERR 0x08000000
++#define BCMA_CC_NFLASH_CONF 0x01A4
++#define BCMA_CC_NFLASH_COL_ADDR 0x01A8
++#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC
++#define BCMA_CC_NFLASH_DATA 0x01B0
++#define BCMA_CC_NFLASH_WAITCNT0 0x01B4
/* 0x1E0 is defined as shared BCMA_CLKCTLST */
#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define BCMA_CC_UART0_DATA 0x0300
-@@ -240,7 +270,6 @@
+@@ -203,6 +316,9 @@
+ #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
+ #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+ #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
++#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */
++#define BCMA_CC_PMU_CTL_RES_SHIFT 13
++#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */
+ #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
+ #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+@@ -214,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -239,8 +357,66 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
++/* NAND flash MLC controller registers (corerev >= 38) */
++#define BCMA_CC_NAND_REVISION 0x0C00
++#define BCMA_CC_NAND_CMD_START 0x0C04
++#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08
++#define BCMA_CC_NAND_CMD_ADDR 0x0C0C
++#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10
++#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14
++#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18
++#define BCMA_CC_NAND_SPARE_RD0 0x0C20
++#define BCMA_CC_NAND_SPARE_RD4 0x0C24
++#define BCMA_CC_NAND_SPARE_RD8 0x0C28
++#define BCMA_CC_NAND_SPARE_RD12 0x0C2C
++#define BCMA_CC_NAND_SPARE_WR0 0x0C30
++#define BCMA_CC_NAND_SPARE_WR4 0x0C34
++#define BCMA_CC_NAND_SPARE_WR8 0x0C38
++#define BCMA_CC_NAND_SPARE_WR12 0x0C3C
++#define BCMA_CC_NAND_ACC_CONTROL 0x0C40
++#define BCMA_CC_NAND_CONFIG 0x0C48
++#define BCMA_CC_NAND_TIMING_1 0x0C50
++#define BCMA_CC_NAND_TIMING_2 0x0C54
++#define BCMA_CC_NAND_SEMAPHORE 0x0C58
++#define BCMA_CC_NAND_DEVID 0x0C60
++#define BCMA_CC_NAND_DEVID_X 0x0C64
++#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68
++#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C
++#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70
++#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74
++#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78
++#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C
++#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80
++#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84
++#define BCMA_CC_NAND_READ_ADDR_X 0x0C90
++#define BCMA_CC_NAND_READ_ADDR 0x0C94
++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98
++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C
++#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0
++#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4
++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8
++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC
++#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0
++#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4
++#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0
++#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0
++#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4
++#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8
++#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC
++#define BCMA_CC_NAND_SPARE_RD16 0x0D30
++#define BCMA_CC_NAND_SPARE_RD20 0x0D34
++#define BCMA_CC_NAND_SPARE_RD24 0x0D38
++#define BCMA_CC_NAND_SPARE_RD28 0x0D3C
++#define BCMA_CC_NAND_CACHE_ADDR 0x0D40
++#define BCMA_CC_NAND_CACHE_DATA 0x0D44
++#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48
++#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1
-@@ -256,6 +285,15 @@
+@@ -256,6 +432,32 @@
/* 4706 PMU */
#define BCMA_CC_PMU4706_MAINPLL_PLL0 0
@@ -2972,10 +4677,27 @@
+#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3
+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
++
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
/* ALP clock on pre-PMU chips */
#define BCMA_CC_PMU_ALP_CLOCK 20000000
-@@ -284,6 +322,19 @@
+@@ -284,6 +486,19 @@
#define BCMA_CC_PPL_PCHI_OFF 5
#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
@@ -2995,7 +4717,7 @@
/* BCM4331 ChipControl numbers. */
#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
-@@ -297,9 +348,18 @@
+@@ -297,9 +512,56 @@
#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
@@ -3011,14 +4733,109 @@
+/* 4313 Chip specific ChipControl register bits */
+#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
+
++/* BCM5357 ChipControl register bits */
++#define BCMA_CHIPCTL_5357_EXTPA BIT(14)
++#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15)
++#define BCMA_CHIPCTL_5357_NFLASH BIT(16)
++#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
++#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
++
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
++
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
-@@ -387,5 +447,6 @@ extern void bcma_chipco_chipctl_maskset(
+@@ -330,6 +592,7 @@ struct bcma_drv_cc {
+ u32 capabilities;
+ u32 capabilities_ext;
+ u8 setup_done:1;
++ u8 early_setup_done:1;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct bcma_chipcommon_pmu pmu;
+@@ -339,6 +602,14 @@ struct bcma_drv_cc {
+ int nr_serial_ports;
+ struct bcma_serial_port serial_ports[4];
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
++ u32 ticks_per_ms;
++ struct platform_device *watchdog;
++
++ /* Lock for GPIO register access. */
++ spinlock_t gpio_lock;
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++ struct gpio_chip gpio;
++#endif
+ };
+
+ /* Register access */
+@@ -355,14 +626,16 @@ struct bcma_drv_cc {
+ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
++extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
+
+ extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+ extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+ void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+
+-extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+- u32 ticks);
++extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
++
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
+
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+@@ -375,9 +648,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+ /* PMU support */
+ extern void bcma_pmu_init(struct bcma_drv_cc *cc);
++extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
+
+ extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
+ u32 value);
+@@ -387,5 +663,8 @@ extern void bcma_chipco_chipctl_maskset(
u32 offset, u32 mask, u32 set);
extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
u32 offset, u32 mask, u32 set);
+extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
++
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
#endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- /dev/null
@@ -3124,6 +4941,44 @@
+#endif
+
+#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -28,6 +28,7 @@
+ #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048
+ #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0
+
++#define BCMA_MIPS_OOBSELINA74 0x004
+ #define BCMA_MIPS_OOBSELOUTA30 0x100
+
+ struct bcma_device;
+@@ -35,17 +36,24 @@ struct bcma_device;
+ struct bcma_drv_mips {
+ struct bcma_device *core;
+ u8 setup_done:1;
+- unsigned int assigned_irqs;
++ u8 early_setup_done:1;
+ };
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_irq(struct bcma_device *core);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
++static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
++
++static inline unsigned int bcma_core_irq(struct bcma_device *core)
++{
++ return 0;
++}
+ #endif
+
+ extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+-
+ #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -53,11 +53,47 @@ struct pci_dev;
@@ -3174,7 +5029,7 @@
/* SBtoPCIx */
#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
-@@ -72,20 +108,118 @@ struct pci_dev;
+@@ -72,20 +108,120 @@ struct pci_dev;
#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
@@ -3249,6 +5104,8 @@
+#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
+#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */
+
++#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8
++
+/* PCIE Root Capability Register bits (Host mode only) */
+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
+
@@ -3296,7 +5153,29 @@
#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
-@@ -56,4 +56,31 @@
+@@ -11,11 +11,13 @@
+ #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+ #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+ #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */
++#define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8
+ #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
+ #define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */
+ #define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */
+ #define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */
+ #define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */
++#define BCMA_CLKCTLST_EXTRESST_SHIFT 24
+ /* Is there any BCM4328 on BCMA bus? */
+ #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
+ #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
+@@ -35,6 +37,7 @@
+ #define BCMA_IOST_BIST_DONE 0x8000
+ #define BCMA_RESET_CTL 0x0800
+ #define BCMA_RESET_CTL_RESET 0x0001
++#define BCMA_RESET_ST 0x0804
+
+ /* BCMA PCI config space registers. */
+ #define BCMA_PCI_PMCSR 0x44
+@@ -56,4 +59,31 @@
#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
@@ -3328,3 +5207,25 @@
+ */
+
#endif /* LINUX_BCMA_REGS_H_ */
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
+@@ -4618,7 +4618,7 @@ static int b43_wireless_core_init(struct
+ switch (dev->dev->bus_type) {
+ #ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci,
++ bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
+ dev->dev->bdev, true);
+ break;
+ #endif
+--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+@@ -533,7 +533,7 @@ ai_buscore_setup(struct si_info *sii, st
+
+ /* fixup necessary chip/core configurations */
+ if (!sii->pch) {
+- sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core);
++ sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci[0].core);
+ if (sii->pch == NULL)
+ return false;
+ }
diff --git a/target/linux/generic/patches-3.3/026-bcma_pmu_regression.patch b/target/linux/generic/patches-3.3/026-bcma_pmu_regression.patch
deleted file mode 100644
index 35ca6b81e3..0000000000
--- a/target/linux/generic/patches-3.3/026-bcma_pmu_regression.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -110,7 +110,7 @@ void bcma_pmu_workarounds(struct bcma_dr
- /* enable 12 mA drive strenth for 4313 and set chipControl
- register bit 1 */
- bcma_chipco_chipctl_maskset(cc, 0,
-- BCMA_CCTRL_4313_12MA_LED_DRIVE,
-+ ~BCMA_CCTRL_4313_12MA_LED_DRIVE,
- BCMA_CCTRL_4313_12MA_LED_DRIVE);
- break;
- case BCMA_CHIP_ID_BCM4331:
-@@ -124,14 +124,14 @@ void bcma_pmu_workarounds(struct bcma_dr
- register bit 15 */
- if (bus->chipinfo.rev == 0) {
- bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
-- BCMA_CCTRL_43224_GPIO_TOGGLE,
-+ ~BCMA_CCTRL_43224_GPIO_TOGGLE,
- BCMA_CCTRL_43224_GPIO_TOGGLE);
- bcma_chipco_chipctl_maskset(cc, 0,
-- BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
-+ ~BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
- BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
- } else {
- bcma_chipco_chipctl_maskset(cc, 0,
-- BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
-+ ~BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
- BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
- }
- break;
diff --git a/target/linux/generic/patches-3.3/027-bcma-add-missing-iounmap-on-error-path.patch b/target/linux/generic/patches-3.3/027-bcma-add-missing-iounmap-on-error-path.patch
deleted file mode 100644
index dc8367b6c5..0000000000
--- a/target/linux/generic/patches-3.3/027-bcma-add-missing-iounmap-on-error-path.patch
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/drivers/bcma/scan.c
-+++ b/drivers/bcma/scan.c
-@@ -462,8 +462,10 @@ int bcma_bus_scan(struct bcma_bus *bus)
- while (eromptr < eromend) {
- struct bcma_device *other_core;
- struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
-- if (!core)
-- return -ENOMEM;
-+ if (!core) {
-+ err = -ENOMEM;
-+ goto out;
-+ }
- INIT_LIST_HEAD(&core->list);
- core->bus = bus;
-
-@@ -478,7 +480,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
- } else if (err == -ESPIPE) {
- break;
- }
-- return err;
-+ goto out;
- }
-
- core->core_index = core_num++;
-@@ -494,10 +496,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
- list_add_tail(&core->list, &bus->cores);
- }
-
-+ err = 0;
-+out:
- if (bus->hosttype == BCMA_HOSTTYPE_SOC)
- iounmap(eromptr);
-
-- return 0;
-+ return err;
- }
-
- int __init bcma_bus_scan_early(struct bcma_bus *bus,
-@@ -537,7 +541,7 @@ int __init bcma_bus_scan_early(struct bc
- else if (err == -ESPIPE)
- break;
- else if (err < 0)
-- return err;
-+ goto out;
-
- core->core_index = core_num++;
- bus->nr_cores++;
-@@ -551,6 +555,7 @@ int __init bcma_bus_scan_early(struct bc
- break;
- }
-
-+out:
- if (bus->hosttype == BCMA_HOSTTYPE_SOC)
- iounmap(eromptr);
-
diff --git a/target/linux/generic/patches-3.3/028-bcma-fix-regression-in-interrupt-assignment-on-mips.patch b/target/linux/generic/patches-3.3/028-bcma-fix-regression-in-interrupt-assignment-on-mips.patch
deleted file mode 100644
index 9386af29cf..0000000000
--- a/target/linux/generic/patches-3.3/028-bcma-fix-regression-in-interrupt-assignment-on-mips.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -131,7 +131,7 @@ static void bcma_core_mips_set_irq(struc
- /* backplane irq line is in use, find out who uses
- * it and set user to irq 0
- */
-- list_for_each_entry_reverse(core, &bus->cores, list) {
-+ list_for_each_entry(core, &bus->cores, list) {
- if ((1 << bcma_core_mips_irqflag(core)) ==
- oldirqflag) {
- bcma_core_mips_set_irq(core, 0);
-@@ -161,7 +161,7 @@ static void bcma_core_mips_dump_irq(stru
- {
- struct bcma_device *core;
-
-- list_for_each_entry_reverse(core, &bus->cores, list) {
-+ list_for_each_entry(core, &bus->cores, list) {
- bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
- }
- }
-@@ -215,7 +215,7 @@ void bcma_core_mips_init(struct bcma_drv
- mcore->assigned_irqs = 1;
-
- /* Assign IRQs to all cores on the bus */
-- list_for_each_entry_reverse(core, &bus->cores, list) {
-+ list_for_each_entry(core, &bus->cores, list) {
- int mips_irq;
- if (core->irq)
- continue;