diff options
Diffstat (limited to 'target')
9 files changed, 38 insertions, 103 deletions
diff --git a/target/linux/ath79/patches-4.19/0050-v5.1-drivers-provide-devm_platform_ioremap_resource.patch b/target/linux/ath79/patches-4.19/0050-v5.1-drivers-provide-devm_platform_ioremap_resource.patch index a52addbf95..32c960f320 100644 --- a/target/linux/ath79/patches-4.19/0050-v5.1-drivers-provide-devm_platform_ioremap_resource.patch +++ b/target/linux/ath79/patches-4.19/0050-v5.1-drivers-provide-devm_platform_ioremap_resource.patch @@ -22,7 +22,7 @@ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- a/drivers/base/platform.c +++ b/drivers/base/platform.c -@@ -80,6 +80,24 @@ struct resource *platform_get_resource(s +@@ -81,6 +81,24 @@ struct resource *platform_get_resource(s EXPORT_SYMBOL_GPL(platform_get_resource); /** diff --git a/target/linux/ath79/patches-4.19/0061-tty-serial-ar933x-uart-rs485-gpio.patch b/target/linux/ath79/patches-4.19/0061-tty-serial-ar933x-uart-rs485-gpio.patch index c0edac906a..7bbcaa08a6 100644 --- a/target/linux/ath79/patches-4.19/0061-tty-serial-ar933x-uart-rs485-gpio.patch +++ b/target/linux/ath79/patches-4.19/0061-tty-serial-ar933x-uart-rs485-gpio.patch @@ -32,11 +32,9 @@ v2: use bool to indicate ongoing half-duplex send, use it afterwards drivers/tty/serial/ar933x_uart.c | 113 +++++++++++++++++++++++++++++-- 2 files changed, 108 insertions(+), 6 deletions(-) -diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig -index 52eaac21ff9f..b675924138e0 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig -@@ -1279,6 +1279,7 @@ config SERIAL_AR933X +@@ -1296,6 +1296,7 @@ config SERIAL_AR933X tristate "AR933X serial port support" depends on HAVE_CLK && ATH79 select SERIAL_CORE @@ -44,8 +42,6 @@ index 52eaac21ff9f..b675924138e0 100644 help If you have an Atheros AR933X SOC based board and want to use the built-in UART of the SoC, say Y to this option. -diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c -index ea12f10610b6..7e7f1398019f 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -13,6 +13,7 @@ @@ -74,7 +70,7 @@ index ea12f10610b6..7e7f1398019f 100644 }; static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, -@@ -100,6 +105,18 @@ static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up) +@@ -100,6 +105,18 @@ static inline void ar933x_uart_stop_tx_i ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); } @@ -93,7 +89,7 @@ index ea12f10610b6..7e7f1398019f 100644 static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch) { unsigned int rdata; -@@ -125,11 +142,21 @@ static unsigned int ar933x_uart_tx_empty(struct uart_port *port) +@@ -125,11 +142,21 @@ static unsigned int ar933x_uart_tx_empty static unsigned int ar933x_uart_get_mctrl(struct uart_port *port) { @@ -116,7 +112,7 @@ index ea12f10610b6..7e7f1398019f 100644 } static void ar933x_uart_start_tx(struct uart_port *port) -@@ -140,6 +167,37 @@ static void ar933x_uart_start_tx(struct uart_port *port) +@@ -140,6 +167,37 @@ static void ar933x_uart_start_tx(struct ar933x_uart_start_tx_interrupt(up); } @@ -154,7 +150,7 @@ index ea12f10610b6..7e7f1398019f 100644 static void ar933x_uart_stop_tx(struct uart_port *port) { struct ar933x_uart_port *up = -@@ -153,8 +211,7 @@ static void ar933x_uart_stop_rx(struct uart_port *port) +@@ -153,8 +211,7 @@ static void ar933x_uart_stop_rx(struct u struct ar933x_uart_port *up = container_of(port, struct ar933x_uart_port, port); @@ -164,7 +160,7 @@ index ea12f10610b6..7e7f1398019f 100644 } static void ar933x_uart_break_ctl(struct uart_port *port, int break_state) -@@ -336,11 +393,20 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) +@@ -336,11 +393,20 @@ static void ar933x_uart_rx_chars(struct static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) { struct circ_buf *xmit = &up->port.state->xmit; @@ -185,7 +181,7 @@ index ea12f10610b6..7e7f1398019f 100644 count = up->port.fifosize; do { unsigned int rdata; -@@ -368,8 +434,14 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) +@@ -368,8 +434,14 @@ static void ar933x_uart_tx_chars(struct if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&up->port); @@ -201,7 +197,7 @@ index ea12f10610b6..7e7f1398019f 100644 } static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id) -@@ -427,8 +499,7 @@ static int ar933x_uart_startup(struct uart_port *port) +@@ -427,8 +499,7 @@ static int ar933x_uart_startup(struct ua AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); /* Enable RX interrupts */ @@ -211,7 +207,7 @@ index ea12f10610b6..7e7f1398019f 100644 spin_unlock_irqrestore(&up->port.lock, flags); -@@ -511,6 +582,21 @@ static const struct uart_ops ar933x_uart_ops = { +@@ -511,6 +582,21 @@ static const struct uart_ops ar933x_uart .verify_port = ar933x_uart_verify_port, }; @@ -233,7 +229,7 @@ index ea12f10610b6..7e7f1398019f 100644 #ifdef CONFIG_SERIAL_AR933X_CONSOLE static struct ar933x_uart_port * ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; -@@ -680,6 +766,8 @@ static int ar933x_uart_probe(struct platform_device *pdev) +@@ -680,6 +766,8 @@ static int ar933x_uart_probe(struct plat goto err_disable_clk; } @@ -242,7 +238,7 @@ index ea12f10610b6..7e7f1398019f 100644 port->mapbase = mem_res->start; port->line = id; port->irq = irq_res->start; -@@ -690,6 +778,7 @@ static int ar933x_uart_probe(struct platform_device *pdev) +@@ -690,6 +778,7 @@ static int ar933x_uart_probe(struct plat port->regshift = 2; port->fifosize = AR933X_UART_FIFO_SIZE; port->ops = &ar933x_uart_ops; @@ -250,7 +246,7 @@ index ea12f10610b6..7e7f1398019f 100644 baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1); up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD); -@@ -697,6 +786,18 @@ static int ar933x_uart_probe(struct platform_device *pdev) +@@ -697,6 +786,18 @@ static int ar933x_uart_probe(struct plat baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP); up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD); diff --git a/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch b/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch deleted file mode 100644 index e63d4c6bc1..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 1738aaf187e0c8e97fbdd9661960b835f45e8985 Mon Sep 17 00:00:00 2001 -From: Zahari Petkov <zahari@balena.io> -Date: Mon, 18 Nov 2019 23:02:55 +0200 -Subject: [PATCH] leds: pca963x: Fix open-drain initialization - -commit 697529091ac7a0a90ca349b914bb30641c13c753 upstream. - -Before commit bb29b9cccd95 ("leds: pca963x: Add bindings to invert -polarity") Mode register 2 was initialized directly with either 0x01 -or 0x05 for open-drain or totem pole (push-pull) configuration. - -Afterwards, MODE2 initialization started using bitwise operations on -top of the default MODE2 register value (0x05). Using bitwise OR for -setting OUTDRV with 0x01 and 0x05 does not produce correct results. -When open-drain is used, instead of setting OUTDRV to 0, the driver -keeps it as 1: - -Open-drain: 0x05 | 0x01 -> 0x05 (0b101 - incorrect) -Totem pole: 0x05 | 0x05 -> 0x05 (0b101 - correct but still wrong) - -Now OUTDRV setting uses correct bitwise operations for initialization: - -Open-drain: 0x05 & ~0x04 -> 0x01 (0b001 - correct) -Totem pole: 0x05 | 0x04 -> 0x05 (0b101 - correct) - -Additional MODE2 register definitions are introduced now as well. - -Fixes: bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity") -Signed-off-by: Zahari Petkov <zahari@balena.io> -Signed-off-by: Pavel Machek <pavel@ucw.cz> ---- - drivers/leds/leds-pca963x.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - ---- a/drivers/leds/leds-pca963x.c -+++ b/drivers/leds/leds-pca963x.c -@@ -43,6 +43,8 @@ - #define PCA963X_LED_PWM 0x2 /* Controlled through PWM */ - #define PCA963X_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */ - -+#define PCA963X_MODE2_OUTDRV 0x04 /* Open-drain or totem pole */ -+#define PCA963X_MODE2_INVRT 0x10 /* Normal or inverted direction */ - #define PCA963X_MODE2_DMBLNK 0x20 /* Enable blinking */ - - #define PCA963X_MODE1 0x00 -@@ -462,12 +464,12 @@ static int pca963x_probe(struct i2c_clie - PCA963X_MODE2); - /* Configure output: open-drain or totem pole (push-pull) */ - if (pdata->outdrv == PCA963X_OPEN_DRAIN) -- mode2 |= 0x01; -+ mode2 &= ~PCA963X_MODE2_OUTDRV; - else -- mode2 |= 0x05; -+ mode2 |= PCA963X_MODE2_OUTDRV; - /* Configure direction: normal or inverted */ - if (pdata->dir == PCA963X_INVERTED) -- mode2 |= 0x10; -+ mode2 |= PCA963X_MODE2_INVRT; - i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2, - mode2); - } diff --git a/target/linux/generic/hack-4.19/204-module_strip.patch b/target/linux/generic/hack-4.19/204-module_strip.patch index 41bb021e71..c9f84dd637 100644 --- a/target/linux/generic/hack-4.19/204-module_strip.patch +++ b/target/linux/generic/hack-4.19/204-module_strip.patch @@ -114,7 +114,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> config MODULES_TREE_LOOKUP --- a/kernel/module.c +++ b/kernel/module.c -@@ -3029,9 +3029,11 @@ static int setup_load_info(struct load_i +@@ -3028,9 +3028,11 @@ static int setup_load_info(struct load_i static int check_modinfo(struct module *mod, struct load_info *info, int flags) { @@ -127,7 +127,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> if (flags & MODULE_INIT_IGNORE_VERMAGIC) modmagic = NULL; -@@ -3052,6 +3054,7 @@ static int check_modinfo(struct module * +@@ -3051,6 +3053,7 @@ static int check_modinfo(struct module * mod->name); add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK); } diff --git a/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch index c8c28b5175..738bbd71d1 100644 --- a/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch +++ b/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch @@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> /* * The Mellanox Tavor device gives false positive parity errors. Mark this * device with a broken_parity_status to allow PCI scanning code to "skip" -@@ -3152,6 +3153,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I +@@ -3147,6 +3148,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); @@ -42,7 +42,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> /* * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. * To work around this, query the size it should be configured to by the -@@ -3177,6 +3180,8 @@ static void quirk_intel_ntb(struct pci_d +@@ -3172,6 +3175,8 @@ static void quirk_intel_ntb(struct pci_d DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); @@ -51,7 +51,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> /* * Some BIOS implementations leave the Intel GPU interrupts enabled, even * though no one is handling them (e.g., if the i915 driver is never -@@ -3215,6 +3220,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN +@@ -3210,6 +3215,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); diff --git a/target/linux/kirkwood/patches-4.14/101-iconnect.patch b/target/linux/kirkwood/patches-4.14/101-iconnect.patch index 9fd14a955b..935e2dfcf5 100644 --- a/target/linux/kirkwood/patches-4.14/101-iconnect.patch +++ b/target/linux/kirkwood/patches-4.14/101-iconnect.patch @@ -60,15 +60,15 @@ partition@100000 { - label = "zImage"; - reg = <0x100000 0x300000>; +- }; +- +- partition@540000 { +- label = "initrd"; +- reg = <0x540000 0x300000>; + label = "second stage u-boot"; + reg = <0x100000 0x200000>; }; -- partition@540000 { -- label = "initrd"; -- reg = <0x540000 0x300000>; -- }; -- - partition@980000 { - label = "boot"; - reg = <0x980000 0x1f400000>; diff --git a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch index f13d459223..60c07b8c76 100644 --- a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch +++ b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch @@ -66,16 +66,16 @@ - partition@500000 { - label = "uImage2"; - reg = <0x00500000 0x300000>; +- }; +- +- partition@800000 { +- label = "failsafe"; +- reg = <0x00800000 0x800000>; + partition@1c0000 { + label = "uboot_env"; + reg = <0x001c0000 0x40000>; }; -- partition@800000 { -- label = "failsafe"; -- reg = <0x00800000 0x800000>; -- }; -- - partition@1000000 { - label = "root"; - reg = <0x01000000 0x7000000>; diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch index 9fd14a955b..935e2dfcf5 100644 --- a/target/linux/kirkwood/patches-4.19/101-iconnect.patch +++ b/target/linux/kirkwood/patches-4.19/101-iconnect.patch @@ -60,15 +60,15 @@ partition@100000 { - label = "zImage"; - reg = <0x100000 0x300000>; +- }; +- +- partition@540000 { +- label = "initrd"; +- reg = <0x540000 0x300000>; + label = "second stage u-boot"; + reg = <0x100000 0x200000>; }; -- partition@540000 { -- label = "initrd"; -- reg = <0x540000 0x300000>; -- }; -- - partition@980000 { - label = "boot"; - reg = <0x980000 0x1f400000>; diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch index 813650124c..4273eb9af1 100644 --- a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch +++ b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch @@ -66,16 +66,16 @@ - partition@500000 { - label = "uImage2"; - reg = <0x00500000 0x300000>; +- }; +- +- partition@800000 { +- label = "failsafe"; +- reg = <0x00800000 0x800000>; + partition@1c0000 { + label = "uboot_env"; + reg = <0x001c0000 0x40000>; }; -- partition@800000 { -- label = "failsafe"; -- reg = <0x00800000 0x800000>; -- }; -- - partition@1000000 { - label = "root"; - reg = <0x01000000 0x7000000>; |