diff options
Diffstat (limited to 'target')
3 files changed, 24 insertions, 35 deletions
diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi index 077bbe4bf1..331a4c6fa3 100644 --- a/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi +++ b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi @@ -243,9 +243,8 @@ &wmac { status = "okay"; - nvmem-cells = <&macaddr_caldata_0>; - nvmem-cell-names = "mac-address"; - qca,no-eeprom; + nvmem-cells = <&macaddr_caldata_0>, <&cal_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; }; &pcie { @@ -254,9 +253,8 @@ ath9k: wifi@0,0 { compatible = "pci168c,0033"; reg = <0x0000 0 0 0 0>; - nvmem-cells = <&macaddr_caldata_c>; - nvmem-cell-names = "mac-address"; - qca,no-eeprom; + nvmem-cells = <&macaddr_caldata_c>, <&cal_art_5000>; + nvmem-cell-names = "mac-address", "calibration"; #gpio-cells = <2>; gpio-controller; }; @@ -274,4 +272,12 @@ macaddr_caldata_c: macaddr@c { reg = <0xc 0x6>; }; + + cal_art_1000: cal@1000 { + reg = <0x1000 0x440>; + }; + + cal_art_5000: cal@5000 { + reg = <0x5000 0x440>; + }; }; diff --git a/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi index 726eae5b29..a51fb1964b 100644 --- a/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi +++ b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi @@ -209,9 +209,8 @@ &wmac { status = "okay"; - nvmem-cells = <&macaddr_caldata_0>; - nvmem-cell-names = "mac-address"; - qca,no-eeprom; + nvmem-cells = <&macaddr_caldata_0>, <&cal_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; }; &pcie { @@ -221,9 +220,8 @@ /* chip is AR9580, override bogus PCI ID 168c:abcd */ compatible = "pci168c,0033"; reg = <0x0000 0 0 0 0>; - nvmem-cells = <&macaddr_caldata_c>; - nvmem-cell-names = "mac-address"; - qca,no-eeprom; + nvmem-cells = <&macaddr_caldata_c>, <&cal_art_5000>; + nvmem-cell-names = "mac-address", "calibration"; qca,gpio-mask=<0xf6ff>; /* unmask pin 9 for RFKILL button */ #gpio-cells = <2>; gpio-controller; @@ -250,4 +248,12 @@ macaddr_caldata_c: macaddr@c { reg = <0xc 0x6>; }; + + cal_art_1000: cal@1000 { + reg = <0x1000 0x440>; + }; + + cal_art_5000: cal@5000 { + reg = <0x5000 0x440>; + }; }; diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index cac955905a..36ab24e2df 100644 --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,29 +12,6 @@ case "$FIRMWARE" in 8dev,rambutan) caldata_extract "caldata" 0x1000 0x800 ;; - netgear,wndr3700-v4|\ - netgear,wndr4300|\ - netgear,wndr4300sw|\ - netgear,wndr4300tn|\ - netgear,wndr4300-v2|\ - netgear,wndr4500-v3) - caldata_extract "caldata" 0x1000 0x440 - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -"ath9k-eeprom-pci-0000:00:00.0.bin") - case $board in - netgear,wndr3700-v4|\ - netgear,wndr4300|\ - netgear,wndr4300sw|\ - netgear,wndr4300tn|\ - netgear,wndr4300-v2|\ - netgear,wndr4500-v3) - caldata_extract "caldata" 0x5000 0x440 - ;; *) caldata_die "board $board is not supported yet" ;; |