diff options
Diffstat (limited to 'target')
4 files changed, 379 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_sercomm_na502s.dts b/target/linux/ramips/dts/mt7621_sercomm_na502s.dts new file mode 100644 index 0000000000..dc71dbd050 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_sercomm_na502s.dts @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "sercomm,na502s", "mediatek,mt7621-soc"; + model = "SERCOMM NA502S"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "green:wifi"; + gpios = <&gpio_expander1 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + zwave { + label = "green:zwave"; + gpios = <&gpio_expander1 1 GPIO_ACTIVE_LOW>; + }; + + zigbee { + label = "green:zigbee"; + gpios = <&gpio_expander1 2 GPIO_ACTIVE_LOW>; + }; + + bluetooth { + label = "green:bluetooth"; + gpios = <&gpio_expander1 3 GPIO_ACTIVE_LOW>; + }; + + rf433 { + label = "green:rf433"; + gpios = <&gpio_expander1 4 GPIO_ACTIVE_LOW>; + }; + + service { + label = "green:service"; + gpios = <&gpio_expander1 5 GPIO_ACTIVE_LOW>; + }; + + 3g { + label = "green:3g"; + gpios = <&gpio_expander1 6 GPIO_ACTIVE_LOW>; + }; + + voice { + label = "green:voice"; + gpios = <&gpio_expander1 7 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + battery_tamper { + label = "battery_tamper"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + linux,code = <BTN_1>; + }; + + reset { + label = "reset"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + voice { + label = "voice"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + select { + label = "select"; + gpios = <&gpio 31 GPIO_ACTIVE_LOW>; + linux,code = <BTN_1>; + }; + + sync { + label = "sync"; + gpios = <&gpio 32 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + zwave_reset { + gpio-export,name = "zwave_reset"; + gpio-export,output = <1>; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + lprf_reset { + gpio-export,name = "lprf_reset"; + gpio-export,output = <1>; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + charger_detect { + gpio-export,name = "charger_detect"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + + buzzer { + gpio-export,name = "buzzer"; + gpio-export,output = <0>; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + }; + + 3g_hw_shunt_en { + gpio-export,name = "3g_hw_shunt_en"; + gpio-export,output = <0>; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + 3g_sw_on_off { + gpio-export,name = "3g_sw_on_off"; + gpio-export,output = <1>; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + + 3g_wake_up { + gpio-export,name = "3g_wake_up"; + gpio-export,output = <0>; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + }; + + 3g_hw_reset { + gpio-export,name = "3g_hw_reset"; + gpio-export,output = <1>; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + }; + + zigbee_reset { + gpio-export,name = "zigbee_reset"; + gpio-export,output = <1>; + gpios = <&gpio_expander0 0 GPIO_ACTIVE_LOW>; + }; + + zigbee_boot { + gpio-export,name = "zigbee_boot"; + gpio-export,output = <1>; + gpios = <&gpio_expander0 1 GPIO_ACTIVE_LOW>; + }; + + 2g_sw0 { + gpio-export,name = "2g_sw0"; + gpio-export,output = <1>; + gpios = <&gpio_expander0 2 GPIO_ACTIVE_LOW>; + }; + + 2g_sw1 { + gpio-export,name = "2g_sw1"; + gpio-export,output = <1>; + gpios = <&gpio_expander0 3 GPIO_ACTIVE_LOW>; + }; + + fm2018_pwd { + gpio-export,name = "fm2018_pwd"; + gpio-export,output = <1>; + gpios = <&gpio_expander0 4 GPIO_ACTIVE_LOW>; + }; + + fm2018_reset { + gpio-export,name = "fm2018_reset"; + gpio-export,output = <1>; + gpios = <&gpio_expander0 5 GPIO_ACTIVE_LOW>; + }; + + batt_teset { + gpio-export,name = "batt_test"; + gpio-export,output = <1>; + gpios = <&gpio_expander0 6 GPIO_ACTIVE_LOW>; + }; + + mfi_reset { + gpio-export,name = "mfi_reset"; + gpio-export,output = <1>; + gpios = <&gpio_expander0 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "config"; + reg = <0x80000 0x80000>; + read-only; + }; + + factory: partition@100000 { + label = "factory"; + reg = <0x100000 0x40000>; + }; + + partition@140000 { + label = "kernel1"; + reg = <0x140000 0x1400000>; + }; + + partition@1540000 { + label = "kernel"; + reg = <0x1540000 0x400000>; + }; + + partition@1940000 { + label = "ubi"; + reg = <0x1940000 0x1000000>; + }; + + partition@2940000 { + label = "user_storage"; + reg = <0x2940000 0x100000>; + }; + + partition@2a40000 { + label = "data"; + reg = <0x2a40000 0x1000000>; + }; + + partition@3a40000 { + label = "storage"; + reg = <0x3a40000 0x3200000>; + }; + + partition@6c40000 { + label = "backup"; + reg = <0x6c40000 0x1340000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <2>; + ieee80211-freq-limit = <2400000 2500000>; + }; +}; + +&state_default { + gpio { + groups = "jtag", "rgmii2"; + function = "gpio"; + }; +}; + +&i2c { + status = "okay"; + + /* This GPIO expander is fake. The kernel fails to initialize the + first expander, but succeeds on the second (real) one */ + gpio_expander2: gpio-expander2@22 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1502q"; + reg = <0x22>; + + gpio-controller; + }; + + gpio_expander0: gpio-expander0@20 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1502q"; + reg = <0x20>; + + gpio-controller; + }; + + gpio_expander1: gpio-expander1@21 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1502q"; + reg = <0x21>; + + gpio-controller; + }; +}; + +&switch0 { + ports { + port@4 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&uartlite2 { + status = "okay"; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_e000: macaddr@e000 { + reg = <0xe000 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 6a9531aa8c..a485a5043a 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1485,6 +1485,21 @@ define Device/sercomm_na502 endef TARGET_DEVICES += sercomm_na502 +define Device/sercomm_na502s + $(Device/uimage-lzma-loader) + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 20971520 + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + UBINIZE_OPTS := -E 5 + KERNEL_SIZE := 4096k + DEVICE_VENDOR := SERCOMM + DEVICE_MODEL := NA502S + DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 kmod-usb-serial \ + kmod-usb-serial-xr_usb_serial_common +endef +TARGET_DEVICES += sercomm_na502s + define Device/storylink_sap-g3200u3 $(Device/dsa-migration) IMAGE_SIZE := 7872k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 688c39940d..a8d8b8eef2 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -13,6 +13,7 @@ ramips_setup_interfaces() mikrotik,routerboard-m11g|\ netgear,ex6150|\ sercomm,na502|\ + sercomm,na502s|\ thunder,timecloud|\ tplink,re350-v1|\ tplink,re500-v1|\ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index c818c7e7cc..407611a6a2 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -84,6 +84,7 @@ platform_do_upgrade() { netis,wf2881|\ raisecom,msg1500-x-00|\ sercomm,na502|\ + sercomm,na502s|\ xiaomi,mi-router-3g|\ xiaomi,mi-router-3-pro|\ xiaomi,mi-router-4|\ |