aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ipq807x/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata9
-rw-r--r--target/linux/ipq807x/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts308
-rw-r--r--target/linux/ipq807x/image/generic.mk11
5 files changed, 331 insertions, 1 deletions
diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network
index 1da5c3ae1e..21364337fb 100644
--- a/target/linux/ipq807x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq807x/base-files/etc/board.d/02_network
@@ -25,6 +25,9 @@ ipq807x_setup_interfaces()
netgear,wax218)
ucidef_set_interface_lan "lan" "dhcp"
;;
+ prpl,haze)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+ ;;
qnap,301w)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
;;
diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
index b3564fe9c6..13cb07477e 100644
--- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
+++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
@@ -21,10 +21,17 @@ case "$FIRMWARE" in
zyxel,nbg7815)
caldata_extract "0:art" 0x1000 0x20000
;;
+ prpl,haze)
+ caldata_extract_mmc "0:ART" 0x1000 0x20000
+ ;;
esac
;;
-"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin")
+"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
+"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
case "$board" in
+ prpl,haze)
+ caldata_extract_mmc "0:ART" 0x26800 0x20000
+ ;;
xiaomi,ax9000)
caldata_extract "0:art" 0x26800 0x20000
;;
diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
index 11717d6324..346cc390f3 100644
--- a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
@@ -70,6 +70,7 @@ platform_do_upgrade() {
netgear,wax218)
nand_do_upgrade "$1"
;;
+ prpl,haze|\
qnap,301w)
kernelname="0:HLOS"
rootfsname="rootfs"
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
new file mode 100644
index 0000000000..8a5200b4eb
--- /dev/null
+++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "prpl Foundation Haze";
+ compatible = "prpl,haze", "qcom,ipq8074";
+
+ aliases {
+ serial0 = &blsp1_uart5;
+ /* Aliases are required by U-Boot to patch MAC addresses */
+ ethernet0 = &dp6_syn;
+ ethernet1 = &dp4;
+ ethernet2 = &dp3;
+ ethernet3 = &dp2;
+ label-mac-device = &dp6_syn;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wps-button {
+ label = "wps";
+ gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset-button {
+ label = "reset";
+ gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-state {
+ mdc-pins {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio-pins {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button-state {
+ wps-pins {
+ pins = "gpio42";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ rst-pins {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&ssphy_0 {
+ status = "okay";
+};
+
+&qusb_phy_0 {
+ status = "okay";
+};
+
+&ssphy_1 {
+ status = "okay";
+};
+
+&qusb_phy_1 {
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <0>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+
+ qca8075_1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ qca8075_2: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ qca8075_3: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ qca8075_4: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ aqr113c: ethernet-phy@5 {
+ compatible ="ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vqmmc-supply = <&l11>;
+};
+
+&switch {
+ status = "okay";
+
+ switch_cpu_bmp = <0x1>; /* cpu port bitmap */
+ switch_lan_bmp = <0x1e>; /* lan port bitmap */
+ switch_wan_bmp = <0x60>; /* wan port bitmap */
+ switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+ switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1*/
+ switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
+ bm_tick_mode = <0>; /* bm tick mode */
+ tm_tick_mode = <0>; /* tm tick mode */
+
+ qcom,port_phyinfo {
+ port@0 {
+ port_id = <1>;
+ phy_address = <0>;
+ };
+ port@1 {
+ port_id = <2>;
+ phy_address = <1>;
+ };
+ port@2 {
+ port_id = <3>;
+ phy_address = <2>;
+ };
+ port@3 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+ port@4 {
+ port_id = <6>;
+ phy_address = <8>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ ethernet-phy-ieee802.3-c45;
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+/* Dummy LAN port */
+&dp1 {
+ status = "disabled";
+ phy-handle = <&qca8075_1>;
+ label = "lan4";
+};
+
+&dp2 {
+ status = "okay";
+ phy-handle = <&qca8075_2>;
+ label = "lan3";
+};
+
+&dp3 {
+ status = "okay";
+ phy-handle = <&qca8075_3>;
+ label = "lan2";
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075_4>;
+ label = "lan1";
+};
+
+&dp6_syn {
+ status = "okay";
+ qcom,mactype = <1>;
+ phy-handle = <&aqr113c>;
+ label = "wan";
+};
+
+&pcie_qmp0 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00020000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+};
+
+&pcie_qmp1 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+ bridge@1,0 {
+ reg = <0x00010000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ status = "okay";
+
+ /* ath11k has no DT compatible for PCI cards */
+ compatible = "pci17cb,1104";
+ reg = <0x00010000 0 0 0 0>;
+
+ qcom,ath11k-calibration-variant = "prpl-Haze";
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-calibration-variant = "prpl-Haze";
+};
diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk
index d57099e5b4..6eca67d11c 100644
--- a/target/linux/ipq807x/image/generic.mk
+++ b/target/linux/ipq807x/image/generic.mk
@@ -95,6 +95,17 @@ define Device/netgear_wax218
endef
TARGET_DEVICES += netgear_wax218
+define Device/prpl_haze
+ $(call Device/FitImage)
+ $(call Device/EmmcImage)
+ DEVICE_VENDOR := prpl Foundation
+ DEVICE_MODEL := Haze
+ DEVICE_DTS_CONFIG := config@hk09
+ SOC := ipq8072
+ DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci
+endef
+TARGET_DEVICES += prpl_haze
+
define Device/qnap_301w
$(call Device/FitImage)
$(call Device/EmmcImage)