diff options
Diffstat (limited to 'target')
3 files changed, 38 insertions, 29 deletions
diff --git a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts index 015bd2efe5..5fd4623726 100644 --- a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts +++ b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts @@ -53,7 +53,7 @@ ð1 { status = "okay"; - mtd-mac-address = <&art 0x10>; + mtd-mac-address = <&hard_config 0x10>; pll-data = <0x03000101 0x80000101 0x80001313>; phy-handle = <&phy0>; @@ -81,32 +81,41 @@ #size-cells = <1>; partition@0 { - label = "routerboot"; - reg = <0x000000 0x00e000>; + label = "RouterBoot"; + reg = <0x0 0x20000>; read-only; - }; - - art: partition@e000 { - label = "art"; - reg = <0x000e000 0x001000>; - read-only; - }; - - partition@f000 { - label = "bios"; - reg = <0x000f000 0x001000>; - read-only; - }; - - partition@10000 { - label = "routerboot2"; - reg = <0x010000 0x00f000>; - read-only; - }; - - partition@1f000 { - label = "soft_config"; - reg = <0x001f000 0x001000>; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader1"; + reg = <0x0 0xe000>; + read-only; + }; + + hard_config: partition@e000 { + label = "hard_config"; + reg = <0xe000 0x1000>; + read-only; + }; + + partition@f000 { + label = "bios"; + reg = <0xf000 0x1000>; + read-only; + }; + + partition@10000 { + label = "bootloader2"; + reg = <0x10000 0xf000>; + read-only; + }; + + partition@1f000 { + label = "soft_config"; + reg = <0x1f000 0x1000>; + }; }; partition@20000 { diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index f5f88484b5..86995de890 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -11,8 +11,8 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in mikrotik,routerboard-wap-g-5hact2hnd) - mikrotik_caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x10) +2) + mikrotik_caldata_extract "hard_config" 0x1000 0x440 + ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary hard_config 0x10) +2) ;; *) caldata_die "board $board is not supported yet" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 6eb9a93b75..7773eb1e3a 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -11,7 +11,7 @@ case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in mikrotik,routerboard-wap-g-5hact2hnd) - mikrotik_caldata_extract "art" 0x5000 0x844 + mikrotik_caldata_extract "hard_config" 0x5000 0x844 ;; esac ;; |