diff options
Diffstat (limited to 'target')
3 files changed, 251 insertions, 243 deletions
diff --git a/target/linux/ipq806x/patches-5.15/098-3-add-fab-scaling-support-with-cpufreq.patch b/target/linux/ipq806x/patches-5.15/098-3-add-fab-scaling-support-with-cpufreq.patch deleted file mode 100644 index 805979df8c..0000000000 --- a/target/linux/ipq806x/patches-5.15/098-3-add-fab-scaling-support-with-cpufreq.patch +++ /dev/null @@ -1,243 +0,0 @@ ---- a/drivers/clk/qcom/Makefile -+++ b/drivers/clk/qcom/Makefile -@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k - clk-qcom-y += clk-hfpll.o - clk-qcom-y += reset.o - clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o -+clk-qcom-y += fab_scaling.o - - # Keep alphabetically sorted by config - obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o ---- /dev/null -+++ b/drivers/clk/qcom/fab_scaling.c -@@ -0,0 +1,172 @@ -+/* -+ * Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/err.h> -+#include <linux/io.h> -+#include <linux/of.h> -+#include <linux/of_device.h> -+#include <linux/clk.h> -+#include <linux/clk-provider.h> -+#include <linux/slab.h> -+#include <linux/fab_scaling.h> -+ -+struct qcom_fab_scaling_data { -+ u32 fab_freq_high; -+ u32 fab_freq_nominal; -+ u32 cpu_freq_threshold; -+ struct clk *apps_fab_clk; -+ struct clk *ddr_fab_clk; -+}; -+ -+static struct qcom_fab_scaling_data *drv_data; -+ -+int scale_fabrics(unsigned long max_cpu_freq) -+{ -+ struct clk *apps_fab_clk = drv_data->apps_fab_clk, -+ *ddr_fab_clk = drv_data->ddr_fab_clk; -+ unsigned long target_freq, cur_freq; -+ int ret; -+ -+ /* Skip fab scaling if the driver is not ready */ -+ if (!apps_fab_clk || !ddr_fab_clk) -+ return 0; -+ -+ if (max_cpu_freq > drv_data->cpu_freq_threshold) -+ target_freq = drv_data->fab_freq_high; -+ else -+ target_freq = drv_data->fab_freq_nominal; -+ -+ cur_freq = clk_get_rate(ddr_fab_clk); -+ -+ if (target_freq != cur_freq) { -+ ret = clk_set_rate(apps_fab_clk, target_freq); -+ if (ret) -+ return ret; -+ ret = clk_set_rate(ddr_fab_clk, target_freq); -+ if (ret) -+ return ret; -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL(scale_fabrics); -+ -+static int ipq806x_fab_scaling_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct clk *apps_fab_clk, *ddr_fab_clk; -+ int ret; -+ -+ if (!np) -+ return -ENODEV; -+ -+ drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL); -+ if (!drv_data) -+ return -ENOMEM; -+ -+ if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) { -+ pr_err("FABRICS turbo freq not found. Using defaults...\n"); -+ drv_data->fab_freq_high = 533000000; -+ } -+ -+ if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) { -+ pr_err("FABRICS nominal freq not found. Using defaults...\n"); -+ drv_data->fab_freq_nominal = 400000000; -+ } -+ -+ if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) { -+ pr_err("FABRICS cpu freq threshold not found. Using defaults...\n"); -+ drv_data->cpu_freq_threshold = 1000000000; -+ } -+ -+ apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk"); -+ ret = PTR_ERR_OR_ZERO(apps_fab_clk); -+ if (ret) { -+ /* -+ * If apps fab clk node is present, but clock is not yet -+ * registered, we should try defering probe. -+ */ -+ if (ret != -EPROBE_DEFER) { -+ pr_err("Failed to get APPS FABRIC clock: %d\n", ret); -+ ret = -ENODEV; -+ } -+ goto err; -+ } -+ -+ clk_prepare_enable(apps_fab_clk); -+ clk_set_rate(apps_fab_clk, drv_data->fab_freq_high); -+ drv_data->apps_fab_clk = apps_fab_clk; -+ -+ ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk"); -+ ret = PTR_ERR_OR_ZERO(ddr_fab_clk); -+ if (ret) { -+ /* -+ * If ddr fab clk node is present, but clock is not yet -+ * registered, we should try defering probe. -+ */ -+ if (ret != -EPROBE_DEFER) { -+ pr_err("Failed to get DDR FABRIC clock: %d\n", ret); -+ ddr_fab_clk = NULL; -+ ret = -ENODEV; -+ } -+ goto err; -+ } -+ -+ clk_prepare_enable(ddr_fab_clk); -+ clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high); -+ drv_data->ddr_fab_clk = ddr_fab_clk; -+ -+ return 0; -+err: -+ kfree(drv_data); -+ return ret; -+} -+ -+static int ipq806x_fab_scaling_remove(struct platform_device *pdev) -+{ -+ kfree(drv_data); -+ return 0; -+} -+ -+static const struct of_device_id fab_scaling_ipq806x_match_table[] = { -+ { .compatible = "qcom,fab-scaling" }, -+ { } -+}; -+ -+static struct platform_driver fab_scaling_ipq806x_driver = { -+ .probe = ipq806x_fab_scaling_probe, -+ .remove = ipq806x_fab_scaling_remove, -+ .driver = { -+ .name = "fab-scaling", -+ .of_match_table = fab_scaling_ipq806x_match_table, -+ }, -+}; -+ -+static int __init fab_scaling_ipq806x_init(void) -+{ -+ return platform_driver_register(&fab_scaling_ipq806x_driver); -+} -+late_initcall(fab_scaling_ipq806x_init); -+ -+static void __exit fab_scaling_ipq806x_exit(void) -+{ -+ platform_driver_unregister(&fab_scaling_ipq806x_driver); -+} -+module_exit(fab_scaling_ipq806x_exit); ---- /dev/null -+++ b/include/linux/fab_scaling.h -@@ -0,0 +1,31 @@ -+/* -+ * Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+ -+#ifndef __FAB_SCALING_H -+#define __FAB_SCALING_H -+ -+/** -+ * scale_fabrics - Scale DDR and APPS FABRICS -+ * -+ * This function monitors all the registered clocks and does APPS -+ * and DDR FABRIC scaling based on the idle frequencies with which -+ * it was registered. -+ * -+ */ -+int scale_fabrics(unsigned long max_cpu_freq); -+ -+#endif ---- a/drivers/cpufreq/qcom-cpufreq-krait.c -+++ b/drivers/cpufreq/qcom-cpufreq-krait.c -@@ -15,6 +15,7 @@ - #include <linux/regulator/consumer.h> - #include <linux/slab.h> - #include <linux/thermal.h> -+#include <linux/fab_scaling.h> - - #include "cpufreq-dt.h" - -@@ -74,6 +75,13 @@ static int set_target(struct cpufreq_pol - goto l2_scale_fail; - } - -+ /* -+ * Scale fabrics with max freq across all cores -+ */ -+ ret = scale_fabrics(target_freq); -+ if (ret) -+ goto l2_scale_fail; -+ - opp = dev_pm_opp_find_level_exact(l2_dev, level); - if (IS_ERR(opp)) { - dev_err(l2_dev, diff --git a/target/linux/ipq806x/patches-5.15/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch b/target/linux/ipq806x/patches-5.15/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch new file mode 100644 index 0000000000..340c58a0c1 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch @@ -0,0 +1,203 @@ +From 13f075999935bb696dbab63243923179f06fa05e Mon Sep 17 00:00:00 2001 +From: Christian Marangi <ansuelsmth@gmail.com> +Date: Thu, 16 Jun 2022 19:56:08 +0200 +Subject: [PATCH 3/4] devfreq: add ipq806x fabric scaling driver + +Add ipq806x fabric scaling driver using the devfreq passive governor. + +Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> +--- + drivers/devfreq/Kconfig | 11 ++ + drivers/devfreq/Makefile | 1 + + drivers/devfreq/ipq806x-fab-devfreq.c | 155 ++++++++++++++++++++++++++ + 3 files changed, 167 insertions(+) + create mode 100644 drivers/devfreq/ipq806x-fab-devfreq.c + +--- a/drivers/devfreq/Kconfig ++++ b/drivers/devfreq/Kconfig +@@ -143,6 +143,17 @@ config ARM_KRAIT_CACHE_DEVFREQ + based on the max frequency across all core and the range set in the device + dts. If provided this scale also the regulator attached to the l2 cache. + ++config ARM_IPQ806X_FAB_DEVFREQ ++ tristate "Scaling support for ipq806x Soc Fabric" ++ depends on ARCH_QCOM || COMPILE_TEST ++ select DEVFREQ_GOV_PASSIVE ++ help ++ This adds the DEVFREQ driver for the ipq806x Soc Fabric. ++ ++ The driver register with the cpufreq notifier and find the right frequency ++ based on the max frequency across all core and the range set in the device ++ dts. ++ + source "drivers/devfreq/event/Kconfig" + + endif # PM_DEVFREQ +--- a/drivers/devfreq/Makefile ++++ b/drivers/devfreq/Makefile +@@ -14,6 +14,7 @@ obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += + obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o + obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o + obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o ++obj-$(CONFIG_ARM_IPQ806X_FAB_DEVFREQ) += ipq806x-fab-devfreq.o + + # DEVFREQ Event Drivers + obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/ +--- /dev/null ++++ b/drivers/devfreq/ipq806x-fab-devfreq.c +@@ -0,0 +1,155 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/cpufreq.h> ++#include <linux/devfreq.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++#include <linux/clk.h> ++#include <linux/slab.h> ++#include <linux/pm_opp.h> ++ ++#include "governor.h" ++ ++struct ipq806x_fab_data { ++ struct clk *fab_clk; ++ struct clk *ddr_clk; ++}; ++ ++static int ipq806x_fab_get_cur_freq(struct device *dev, unsigned long *freq) ++{ ++ struct ipq806x_fab_data *data = dev_get_drvdata(dev); ++ ++ *freq = clk_get_rate(data->fab_clk); ++ ++ return 0; ++}; ++ ++static int ipq806x_fab_target(struct device *dev, unsigned long *freq, ++ u32 flags) ++{ ++ struct ipq806x_fab_data *data = dev_get_drvdata(dev); ++ struct dev_pm_opp *opp; ++ int ret; ++ ++ opp = dev_pm_opp_find_freq_ceil(dev, freq); ++ if (unlikely(IS_ERR(opp))) ++ return PTR_ERR(opp); ++ ++ dev_pm_opp_put(opp); ++ ++ ret = clk_set_rate(data->fab_clk, *freq); ++ if (ret) ++ return ret; ++ ++ return clk_set_rate(data->ddr_clk, *freq); ++}; ++ ++static int ipq806x_fab_get_dev_status(struct device *dev, ++ struct devfreq_dev_status *stat) ++{ ++ struct ipq806x_fab_data *data = dev_get_drvdata(dev); ++ ++ stat->busy_time = 0; ++ stat->total_time = 0; ++ stat->current_frequency = clk_get_rate(data->fab_clk); ++ ++ return 0; ++}; ++ ++static struct devfreq_dev_profile ipq806x_fab_devfreq_profile = { ++ .target = ipq806x_fab_target, ++ .get_dev_status = ipq806x_fab_get_dev_status, ++ .get_cur_freq = ipq806x_fab_get_cur_freq ++}; ++ ++static struct devfreq_passive_data devfreq_gov_data = { ++ .parent_type = CPUFREQ_PARENT_DEV, ++}; ++ ++static int ipq806x_fab_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct ipq806x_fab_data *data; ++ struct devfreq *devfreq; ++ struct clk *clk; ++ int ret; ++ ++ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); ++ if (!data) ++ return -ENOMEM; ++ ++ clk = devm_clk_get(dev, "apps-fab-clk"); ++ if (IS_ERR(clk)) { ++ dev_err_probe(dev, PTR_ERR(clk), "failed to get apps fab clk\n"); ++ return PTR_ERR(clk); ++ } ++ ++ clk_prepare_enable(clk); ++ data->fab_clk = clk; ++ ++ clk = devm_clk_get(dev, "ddr-fab-clk"); ++ if (IS_ERR(clk)) { ++ dev_err_probe(dev, PTR_ERR(clk), "failed to get ddr fab clk\n"); ++ goto err_ddr; ++ } ++ ++ clk_prepare_enable(clk); ++ data->ddr_clk = clk; ++ ++ ret = dev_pm_opp_of_add_table(dev); ++ if (ret) { ++ dev_err(dev, "failed to parse fab freq thresholds\n"); ++ return ret; ++ } ++ ++ dev_set_drvdata(dev, data); ++ ++ devfreq = devm_devfreq_add_device(&pdev->dev, &ipq806x_fab_devfreq_profile, ++ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data); ++ if (IS_ERR(devfreq)) ++ dev_pm_opp_remove_table(dev); ++ ++ return PTR_ERR_OR_ZERO(devfreq); ++ ++err_ddr: ++ clk_unprepare(data->fab_clk); ++ clk_put(data->fab_clk); ++ return PTR_ERR(clk); ++}; ++ ++static int ipq806x_fab_remove(struct platform_device *pdev) ++{ ++ struct ipq806x_fab_data *data = dev_get_drvdata(&pdev->dev); ++ ++ clk_unprepare(data->fab_clk); ++ clk_put(data->fab_clk); ++ ++ clk_unprepare(data->ddr_clk); ++ clk_put(data->ddr_clk); ++ ++ dev_pm_opp_remove_table(&pdev->dev); ++ ++ return 0; ++}; ++ ++static const struct of_device_id ipq806x_fab_match_table[] = { ++ { .compatible = "qcom,fab-scaling" }, ++ {} ++}; ++ ++static struct platform_driver ipq806x_fab_driver = { ++ .probe = ipq806x_fab_probe, ++ .remove = ipq806x_fab_remove, ++ .driver = { ++ .name = "ipq806x-fab-scaling", ++ .of_match_table = ipq806x_fab_match_table, ++ }, ++}; ++module_platform_driver(ipq806x_fab_driver); ++ ++MODULE_DESCRIPTION("ipq806x Fab Scaling driver"); ++MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-5.15/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch b/target/linux/ipq806x/patches-5.15/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch new file mode 100644 index 0000000000..f4de1dbb52 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch @@ -0,0 +1,48 @@ +From c3573f0907dadb0a6e9933aae2a46a489abcbd48 Mon Sep 17 00:00:00 2001 +From: Christian Marangi <ansuelsmth@gmail.com> +Date: Thu, 16 Jun 2022 20:03:05 +0200 +Subject: [PATCH 4/4] ARM: dts: qcom: add fab scaling node for ipq806x + +Add fabric scaling node for ipq806x to correctly scale apps and ddr +fabric clk. + +Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -170,6 +170,18 @@ + }; + }; + ++ opp_table_fab: opp_table_fab { ++ compatible = "operating-points-v2"; ++ ++ opp-533000000 { ++ opp-hz = /bits/ 64 <533000000>; ++ }; ++ ++ opp-400000000 { ++ opp-hz = /bits/ 64 <400000000>; ++ }; ++ }; ++ + thermal-zones { + tsens_tz_sensor0 { + polling-delay-passive = <0>; +@@ -470,6 +482,13 @@ + operating-points-v2 = <&opp_table_l2>; + }; + ++ fab-scaling { ++ compatible = "qcom,fab-scaling"; ++ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>; ++ clock-names = "apps-fab-clk", "ddr-fab-clk"; ++ operating-points-v2 = <&opp_table_fab>; ++ }; ++ + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; |