diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts | 56 | ||||
| -rw-r--r-- | target/linux/realtek/dts-5.15/rtl8380_d-link_dgs-1210-10mp-f.dts | 56 |
2 files changed, 108 insertions, 4 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts index e7db688ad5..39e37ee595 100644 --- a/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts +++ b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10mp-f.dts @@ -8,6 +8,42 @@ compatible = "d-link,dgs-1210-10mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc"; model = "D-Link DGS-1210-10MP F"; + + /* i2c for sfp port9 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + /* i2c for sfp port10 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; }; &leds { @@ -72,8 +108,24 @@ SWITCH_PORT(13, 6, internal) SWITCH_PORT(14, 7, internal) SWITCH_PORT(15, 8, internal) - SWITCH_SFP_PORT(24, 9, rgmii-id) - SWITCH_SFP_PORT(26, 10, rgmii-id) + + port@24 { + reg = <24>; + label = "lan9"; + phy-handle = <14>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-handle = <15>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; port@28 { ethernet = <ðernet0>; diff --git a/target/linux/realtek/dts-5.15/rtl8380_d-link_dgs-1210-10mp-f.dts b/target/linux/realtek/dts-5.15/rtl8380_d-link_dgs-1210-10mp-f.dts index e7db688ad5..39e37ee595 100644 --- a/target/linux/realtek/dts-5.15/rtl8380_d-link_dgs-1210-10mp-f.dts +++ b/target/linux/realtek/dts-5.15/rtl8380_d-link_dgs-1210-10mp-f.dts @@ -8,6 +8,42 @@ compatible = "d-link,dgs-1210-10mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc"; model = "D-Link DGS-1210-10MP F"; + + /* i2c for sfp port9 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + /* i2c for sfp port10 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; }; &leds { @@ -72,8 +108,24 @@ SWITCH_PORT(13, 6, internal) SWITCH_PORT(14, 7, internal) SWITCH_PORT(15, 8, internal) - SWITCH_SFP_PORT(24, 9, rgmii-id) - SWITCH_SFP_PORT(26, 10, rgmii-id) + + port@24 { + reg = <24>; + label = "lan9"; + phy-handle = <14>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-handle = <15>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; port@28 { ethernet = <ðernet0>; |