diff options
Diffstat (limited to 'target')
22 files changed, 53 insertions, 87 deletions
diff --git a/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch index 6db2f2ec27..743ffe4206 100644 --- a/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch +++ b/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch @@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> #include "xhci.h" #include "xhci-trace.h" -@@ -262,6 +264,458 @@ static void xhci_pme_acpi_rtd3_enable(st +@@ -264,6 +266,458 @@ static void xhci_pme_acpi_rtd3_enable(st static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } #endif /* CONFIG_ACPI */ @@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { -@@ -300,6 +754,22 @@ static int xhci_pci_probe(struct pci_dev +@@ -305,6 +759,22 @@ static int xhci_pci_probe(struct pci_dev struct hc_driver *driver; struct usb_hcd *hcd; @@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> driver = (struct hc_driver *)id->driver_data; /* Prevent runtime suspending between USB-2 and USB-3 initialization */ -@@ -361,6 +831,16 @@ static void xhci_pci_remove(struct pci_d +@@ -363,6 +833,16 @@ static void xhci_pci_remove(struct pci_d { struct xhci_hcd *xhci; diff --git a/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch index a745ea6f44..5bed3d26fa 100644 --- a/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch +++ b/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch @@ -13,7 +13,7 @@ produce a noisy warning. --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -215,6 +215,7 @@ static void xhci_pci_quirks(struct devic +@@ -217,6 +217,7 @@ static void xhci_pci_quirks(struct devic pdev->device == 0x0015) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_ZERO_64B_REGS; @@ -43,7 +43,7 @@ produce a noisy warning. hcd->msi_enabled = 1; --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1876,6 +1876,7 @@ struct xhci_hcd { +@@ -1883,6 +1883,7 @@ struct xhci_hcd { /* support xHCI 0.96 spec USB2 software LPM */ unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ diff --git a/target/linux/bcm27xx/patches-4.19/950-0039-Add-dwc_otg-driver.patch b/target/linux/bcm27xx/patches-4.19/950-0039-Add-dwc_otg-driver.patch index 79c2aa17f0..7fdfa4785e 100644 --- a/target/linux/bcm27xx/patches-4.19/950-0039-Add-dwc_otg-driver.patch +++ b/target/linux/bcm27xx/patches-4.19/950-0039-Add-dwc_otg-driver.patch @@ -917,7 +917,7 @@ Fixes https://github.com/raspberrypi/linux/issues/2408 } --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -5222,7 +5222,7 @@ static void port_event(struct usb_hub *h +@@ -5228,7 +5228,7 @@ static void port_event(struct usb_hub *h u16 status = 0, unused; port_dev->over_current_count++; diff --git a/target/linux/bcm27xx/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch b/target/linux/bcm27xx/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch index 6bc76ed6e6..3af52b9a86 100644 --- a/target/linux/bcm27xx/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch +++ b/target/linux/bcm27xx/patches-4.19/950-0466-thermal-brcmstb_thermal-Add-BCM2838-support.patch @@ -62,8 +62,8 @@ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> + const struct brcmstb_thermal_of_data *socdata; }; - static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope, -@@ -164,17 +171,18 @@ static inline u32 avs_tmon_temp_to_code( + /* Convert a HW code to a temperature reading (millidegree celsius) */ +@@ -151,17 +158,18 @@ static inline u32 avs_tmon_temp_to_code( static int brcmstb_get_temp(void *data, int *temp) { struct brcmstb_thermal_priv *priv = data; @@ -84,7 +84,7 @@ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> t = avs_tmon_code_to_temp(priv->thermal, val); if (t < 0) -@@ -299,13 +307,34 @@ static int brcmstb_set_trips(void *data, +@@ -286,13 +294,34 @@ static int brcmstb_set_trips(void *data, return 0; } @@ -121,7 +121,7 @@ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> {}, }; MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table); -@@ -326,10 +355,27 @@ static int brcmstb_thermal_probe(struct +@@ -313,10 +342,27 @@ static int brcmstb_thermal_probe(struct if (IS_ERR(priv->tmon_base)) return PTR_ERR(priv->tmon_base); @@ -150,7 +150,7 @@ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> if (IS_ERR(thermal)) { ret = PTR_ERR(thermal); dev_err(&pdev->dev, "could not register sensor: %d\n", ret); -@@ -369,6 +415,9 @@ static int brcmstb_thermal_exit(struct p +@@ -356,6 +402,9 @@ static int brcmstb_thermal_exit(struct p if (thermal) thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal); diff --git a/target/linux/bcm27xx/patches-4.19/950-0476-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch b/target/linux/bcm27xx/patches-4.19/950-0476-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch index 239e142eda..27e1a6c473 100644 --- a/target/linux/bcm27xx/patches-4.19/950-0476-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch +++ b/target/linux/bcm27xx/patches-4.19/950-0476-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch @@ -10,7 +10,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -222,6 +222,10 @@ static void xhci_pci_quirks(struct devic +@@ -224,6 +224,10 @@ static void xhci_pci_quirks(struct devic pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; diff --git a/target/linux/bcm27xx/patches-4.19/950-0609-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch b/target/linux/bcm27xx/patches-4.19/950-0609-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch index 3e413c7d00..7895040ff4 100644 --- a/target/linux/bcm27xx/patches-4.19/950-0609-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch +++ b/target/linux/bcm27xx/patches-4.19/950-0609-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch @@ -23,7 +23,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -223,8 +223,10 @@ static void xhci_pci_quirks(struct devic +@@ -225,8 +225,10 @@ static void xhci_pci_quirks(struct devic xhci->quirks |= XHCI_BROKEN_STREAMS; if (pdev->vendor == PCI_VENDOR_ID_VIA && @@ -80,7 +80,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> /* --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1865,6 +1865,7 @@ struct xhci_hcd { +@@ -1872,6 +1872,7 @@ struct xhci_hcd { #define XHCI_ZERO_64B_REGS BIT_ULL(32) #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) diff --git a/target/linux/bcm27xx/patches-4.19/950-0666-xhci-Use-more-event-ring-segment-table-entries.patch b/target/linux/bcm27xx/patches-4.19/950-0666-xhci-Use-more-event-ring-segment-table-entries.patch index 0949f97f62..eea3ce5bbe 100644 --- a/target/linux/bcm27xx/patches-4.19/950-0666-xhci-Use-more-event-ring-segment-table-entries.patch +++ b/target/linux/bcm27xx/patches-4.19/950-0666-xhci-Use-more-event-ring-segment-table-entries.patch @@ -22,7 +22,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c -@@ -2495,9 +2495,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, +@@ -2516,9 +2516,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, * Event ring setup: Allocate a normal ring, but also setup * the event ring segment table (ERST). Section 4.9.3. */ @@ -36,7 +36,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> if (!xhci->event_ring) goto fail; if (xhci_check_trb_in_td_math(xhci) < 0) -@@ -2510,7 +2512,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, +@@ -2531,7 +2533,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, /* set ERST count with the number of entries in the segment table */ val = readl(&xhci->ir_set->erst_size); val &= ERST_SIZE_MASK; diff --git a/target/linux/bcm53xx/patches-4.19/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.19/180-usb-xhci-add-support-for-performing-fake-doorbell.patch index 6bd46a2bcd..cd4d963966 100644 --- a/target/linux/bcm53xx/patches-4.19/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ b/target/linux/bcm53xx/patches-4.19/180-usb-xhci-add-support-for-performing-fake-doorbell.patch @@ -127,7 +127,7 @@ it on BCM4708 family. /* --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1865,6 +1865,7 @@ struct xhci_hcd { +@@ -1872,6 +1872,7 @@ struct xhci_hcd { #define XHCI_ZERO_64B_REGS BIT_ULL(32) #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) diff --git a/target/linux/generic/backport-4.19/499-v4.22-iio-add-IIO_MASSCONCENTRATION-channel-type.patch b/target/linux/generic/backport-4.19/499-v4.22-iio-add-IIO_MASSCONCENTRATION-channel-type.patch index c214495f03..bceb735146 100644 --- a/target/linux/generic/backport-4.19/499-v4.22-iio-add-IIO_MASSCONCENTRATION-channel-type.patch +++ b/target/linux/generic/backport-4.19/499-v4.22-iio-add-IIO_MASSCONCENTRATION-channel-type.patch @@ -28,8 +28,6 @@ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> tools/iio/iio_event_monitor.c | 10 ++++++++++ 4 files changed, 36 insertions(+), 1 deletion(-) -diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio -index 8127a08e366d..67fd88bf7910 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1684,4 +1684,19 @@ KernelVersion: 4.18 @@ -54,11 +52,9 @@ index 8127a08e366d..67fd88bf7910 100644 + Mass concentration reading of particulate matter in ug / m3. + pmX consists of particles with aerodynamic diameter less or + equal to X micrometers. -diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c -index 4f5cd9f60870..4700fd5d8c90 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c -@@ -87,6 +87,7 @@ static const char * const iio_chan_type_name_spec[] = { +@@ -87,6 +87,7 @@ static const char * const iio_chan_type_ [IIO_GRAVITY] = "gravity", [IIO_POSITIONRELATIVE] = "positionrelative", [IIO_PHASE] = "phase", @@ -66,7 +62,7 @@ index 4f5cd9f60870..4700fd5d8c90 100644 }; static const char * const iio_modifier_names[] = { -@@ -127,6 +128,10 @@ static const char * const iio_modifier_names[] = { +@@ -127,6 +128,10 @@ static const char * const iio_modifier_n [IIO_MOD_Q] = "q", [IIO_MOD_CO2] = "co2", [IIO_MOD_VOC] = "voc", @@ -77,8 +73,6 @@ index 4f5cd9f60870..4700fd5d8c90 100644 }; /* relies on pairs of these shared then separate */ -diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h -index 92baabc103ac..c59adac24b1c 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -46,6 +46,7 @@ enum iio_chan_type { @@ -100,11 +94,9 @@ index 92baabc103ac..c59adac24b1c 100644 }; enum iio_event_type { -diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c -index ac2de6b7e89f..f6b8003fbe3c 100644 --- a/tools/iio/iio_event_monitor.c +++ b/tools/iio/iio_event_monitor.c -@@ -60,6 +60,7 @@ static const char * const iio_chan_type_name_spec[] = { +@@ -60,6 +60,7 @@ static const char * const iio_chan_type_ [IIO_GRAVITY] = "gravity", [IIO_POSITIONRELATIVE] = "positionrelative", [IIO_PHASE] = "phase", @@ -112,7 +104,7 @@ index ac2de6b7e89f..f6b8003fbe3c 100644 }; static const char * const iio_ev_type_text[] = { -@@ -115,6 +116,10 @@ static const char * const iio_modifier_names[] = { +@@ -115,6 +116,10 @@ static const char * const iio_modifier_n [IIO_MOD_Q] = "q", [IIO_MOD_CO2] = "co2", [IIO_MOD_VOC] = "voc", @@ -123,7 +115,7 @@ index ac2de6b7e89f..f6b8003fbe3c 100644 }; static bool event_is_known(struct iio_event_data *event) -@@ -156,6 +161,7 @@ static bool event_is_known(struct iio_event_data *event) +@@ -156,6 +161,7 @@ static bool event_is_known(struct iio_ev case IIO_GRAVITY: case IIO_POSITIONRELATIVE: case IIO_PHASE: @@ -131,7 +123,7 @@ index ac2de6b7e89f..f6b8003fbe3c 100644 break; default: return false; -@@ -200,6 +206,10 @@ static bool event_is_known(struct iio_event_data *event) +@@ -200,6 +206,10 @@ static bool event_is_known(struct iio_ev case IIO_MOD_Q: case IIO_MOD_CO2: case IIO_MOD_VOC: diff --git a/target/linux/generic/backport-4.19/500-v5.1-iio-chemical-add-support-for-Sensirion-SPS30-sensor.patch b/target/linux/generic/backport-4.19/500-v5.1-iio-chemical-add-support-for-Sensirion-SPS30-sensor.patch index 73210b8e0e..d30c7c3cc1 100644 --- a/target/linux/generic/backport-4.19/500-v5.1-iio-chemical-add-support-for-Sensirion-SPS30-sensor.patch +++ b/target/linux/generic/backport-4.19/500-v5.1-iio-chemical-add-support-for-Sensirion-SPS30-sensor.patch @@ -14,8 +14,6 @@ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 3 files changed, 419 insertions(+) create mode 100644 drivers/iio/chemical/sps30.c -diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig -index b8e005be4f87..57832b4360e9 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -61,6 +61,17 @@ config IAQCORE @@ -36,8 +34,6 @@ index b8e005be4f87..57832b4360e9 100644 config VZ89X tristate "SGX Sensortech MiCS VZ89X VOC sensor" depends on I2C -diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile -index 2f4c4ba4d781..9f42f4252151 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o @@ -46,9 +42,6 @@ index 2f4c4ba4d781..9f42f4252151 100644 obj-$(CONFIG_IAQCORE) += ams-iaq-core.o +obj-$(CONFIG_SPS30) += sps30.o obj-$(CONFIG_VZ89X) += vz89x.o -diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c -new file mode 100644 -index 000000000000..fa3cd409b90b --- /dev/null +++ b/drivers/iio/chemical/sps30.c @@ -0,0 +1,407 @@ diff --git a/target/linux/generic/backport-4.19/501-v5.1-iio-chemical-sps30-add-support-for-self-cleaning.patch b/target/linux/generic/backport-4.19/501-v5.1-iio-chemical-sps30-add-support-for-self-cleaning.patch index 9e4b9c2d43..7054fb0313 100644 --- a/target/linux/generic/backport-4.19/501-v5.1-iio-chemical-sps30-add-support-for-self-cleaning.patch +++ b/target/linux/generic/backport-4.19/501-v5.1-iio-chemical-sps30-add-support-for-self-cleaning.patch @@ -21,9 +21,6 @@ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 2 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sps30 -diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sps30 b/Documentation/ABI/testing/sysfs-bus-iio-sps30 -new file mode 100644 -index 000000000000..e7ce2c57635e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-sps30 @@ -0,0 +1,8 @@ @@ -35,8 +32,6 @@ index 000000000000..e7ce2c57635e + Writing 1 starts sensor self cleaning. Internal fan accelerates + to its maximum speed and keeps spinning for about 10 seconds in + order to blow out accumulated dust. -diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c -index fa3cd409b90b..f3b4390c8f5c 100644 --- a/drivers/iio/chemical/sps30.c +++ b/drivers/iio/chemical/sps30.c @@ -7,7 +7,6 @@ @@ -55,7 +50,7 @@ index fa3cd409b90b..f3b4390c8f5c 100644 enum { PM1, -@@ -104,6 +104,7 @@ static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) +@@ -104,6 +104,7 @@ static int sps30_do_cmd(struct sps30_sta break; case SPS30_STOP_MEAS: case SPS30_RESET: @@ -63,7 +58,7 @@ index fa3cd409b90b..f3b4390c8f5c 100644 ret = sps30_write_then_read(state, buf, 2, NULL, 0); break; case SPS30_READ_DATA_READY_FLAG: -@@ -275,7 +276,39 @@ static int sps30_read_raw(struct iio_dev *indio_dev, +@@ -275,7 +276,39 @@ static int sps30_read_raw(struct iio_dev return -EINVAL; } diff --git a/target/linux/generic/backport-4.19/502-v5.1-iio-chemical-sps30-allow-changing-self-cleaning-peri.patch b/target/linux/generic/backport-4.19/502-v5.1-iio-chemical-sps30-allow-changing-self-cleaning-peri.patch index ca3e23b8fc..3a1335ba44 100644 --- a/target/linux/generic/backport-4.19/502-v5.1-iio-chemical-sps30-allow-changing-self-cleaning-peri.patch +++ b/target/linux/generic/backport-4.19/502-v5.1-iio-chemical-sps30-allow-changing-self-cleaning-peri.patch @@ -14,8 +14,6 @@ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> drivers/iio/chemical/sps30.c | 143 +++++++++++++++--- 2 files changed, 145 insertions(+), 18 deletions(-) -diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sps30 b/Documentation/ABI/testing/sysfs-bus-iio-sps30 -index e7ce2c57635e..143df8e89d08 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-sps30 +++ b/Documentation/ABI/testing/sysfs-bus-iio-sps30 @@ -6,3 +6,23 @@ Description: @@ -42,8 +40,6 @@ index e7ce2c57635e..143df8e89d08 100644 + The range of available values in seconds represented as the + minimum value, the step and the maximum value, all enclosed in + square brackets. -diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c -index f3b4390c8f5c..376fac41ecb5 100644 --- a/drivers/iio/chemical/sps30.c +++ b/drivers/iio/chemical/sps30.c @@ -5,9 +5,6 @@ @@ -104,7 +100,7 @@ index f3b4390c8f5c..376fac41ecb5 100644 }; DECLARE_CRC8_TABLE(sps30_crc8_table); -@@ -107,6 +117,9 @@ static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) +@@ -107,6 +117,9 @@ static int sps30_do_cmd(struct sps30_sta case SPS30_START_FAN_CLEANING: ret = sps30_write_then_read(state, buf, 2, NULL, 0); break; @@ -114,7 +110,7 @@ index f3b4390c8f5c..376fac41ecb5 100644 case SPS30_READ_DATA_READY_FLAG: case SPS30_READ_DATA: case SPS30_READ_SERIAL: -@@ -114,6 +127,15 @@ static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) +@@ -114,6 +127,15 @@ static int sps30_do_cmd(struct sps30_sta size += size / 2; ret = sps30_write_then_read(state, buf, 2, buf, size); break; @@ -130,7 +126,7 @@ index f3b4390c8f5c..376fac41ecb5 100644 } if (ret) -@@ -170,6 +192,14 @@ static int sps30_do_meas(struct sps30_state *state, s32 *data, int size) +@@ -170,6 +192,14 @@ static int sps30_do_meas(struct sps30_st int i, ret, tries = 5; u8 tmp[16]; @@ -145,7 +141,7 @@ index f3b4390c8f5c..376fac41ecb5 100644 while (tries--) { ret = sps30_do_cmd(state, SPS30_READ_DATA_READY_FLAG, tmp, 2); if (ret) -@@ -276,6 +306,24 @@ static int sps30_read_raw(struct iio_dev *indio_dev, +@@ -276,6 +306,24 @@ static int sps30_read_raw(struct iio_dev return -EINVAL; } @@ -170,7 +166,7 @@ index f3b4390c8f5c..376fac41ecb5 100644 static ssize_t start_cleaning_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) -@@ -296,10 +344,82 @@ static ssize_t start_cleaning_store(struct device *dev, +@@ -296,10 +344,82 @@ static ssize_t start_cleaning_store(stru return len; } @@ -253,7 +249,7 @@ index f3b4390c8f5c..376fac41ecb5 100644 NULL }; -@@ -362,6 +482,7 @@ static int sps30_probe(struct i2c_client *client) +@@ -362,6 +482,7 @@ static int sps30_probe(struct i2c_client state = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); state->client = client; @@ -261,7 +257,7 @@ index f3b4390c8f5c..376fac41ecb5 100644 indio_dev->dev.parent = &client->dev; indio_dev->info = &sps30_info; indio_dev->name = client->name; -@@ -373,19 +494,11 @@ static int sps30_probe(struct i2c_client *client) +@@ -373,19 +494,11 @@ static int sps30_probe(struct i2c_client mutex_init(&state->lock); crc8_populate_msb(sps30_crc8_table, SPS30_CRC8_POLYNOMIAL); @@ -282,7 +278,7 @@ index f3b4390c8f5c..376fac41ecb5 100644 ret = sps30_do_cmd(state, SPS30_READ_SERIAL, buf, sizeof(buf)); if (ret) { -@@ -395,12 +508,6 @@ static int sps30_probe(struct i2c_client *client) +@@ -395,12 +508,6 @@ static int sps30_probe(struct i2c_client /* returned serial number is already NUL terminated */ dev_info(&client->dev, "serial number: %s\n", buf); diff --git a/target/linux/generic/backport-4.19/503-v5.1-iio-chemical-sps30-remove-printk-format-specifier.patch b/target/linux/generic/backport-4.19/503-v5.1-iio-chemical-sps30-remove-printk-format-specifier.patch index 8cdd0a718d..b0fe5ac2e6 100644 --- a/target/linux/generic/backport-4.19/503-v5.1-iio-chemical-sps30-remove-printk-format-specifier.patch +++ b/target/linux/generic/backport-4.19/503-v5.1-iio-chemical-sps30-remove-printk-format-specifier.patch @@ -12,8 +12,6 @@ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> drivers/iio/chemical/sps30.c | 2 -- 1 file changed, 2 deletions(-) -diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c -index 376fac41ecb5..e03a28a67146 100644 --- a/drivers/iio/chemical/sps30.c +++ b/drivers/iio/chemical/sps30.c @@ -7,8 +7,6 @@ diff --git a/target/linux/generic/backport-4.19/504-v5.1-iio-chemical-sps30-fix-a-loop-timeout-test.patch b/target/linux/generic/backport-4.19/504-v5.1-iio-chemical-sps30-fix-a-loop-timeout-test.patch index e0fcdc2ce2..c0aae35549 100644 --- a/target/linux/generic/backport-4.19/504-v5.1-iio-chemical-sps30-fix-a-loop-timeout-test.patch +++ b/target/linux/generic/backport-4.19/504-v5.1-iio-chemical-sps30-fix-a-loop-timeout-test.patch @@ -13,11 +13,9 @@ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> drivers/iio/chemical/sps30.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c -index e03a28a67146..375df5060ed5 100644 --- a/drivers/iio/chemical/sps30.c +++ b/drivers/iio/chemical/sps30.c -@@ -210,7 +210,7 @@ static int sps30_do_meas(struct sps30_state *state, s32 *data, int size) +@@ -210,7 +210,7 @@ static int sps30_do_meas(struct sps30_st msleep_interruptible(300); } diff --git a/target/linux/generic/backport-4.19/505-v5.1-iio-chemical-sps30-Supress-some-switch-fallthrough-w.patch b/target/linux/generic/backport-4.19/505-v5.1-iio-chemical-sps30-Supress-some-switch-fallthrough-w.patch index a1c0b3ddca..08cc34ff40 100644 --- a/target/linux/generic/backport-4.19/505-v5.1-iio-chemical-sps30-Supress-some-switch-fallthrough-w.patch +++ b/target/linux/generic/backport-4.19/505-v5.1-iio-chemical-sps30-Supress-some-switch-fallthrough-w.patch @@ -13,11 +13,9 @@ Acked-by: Tomasz Duszynski <tduszyns@gmail.com> drivers/iio/chemical/sps30.c | 3 +++ 1 file changed, 3 insertions(+) -diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c -index 375df5060ed5..edbb956e81e8 100644 --- a/drivers/iio/chemical/sps30.c +++ b/drivers/iio/chemical/sps30.c -@@ -118,6 +118,7 @@ static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) +@@ -118,6 +118,7 @@ static int sps30_do_cmd(struct sps30_sta case SPS30_READ_AUTO_CLEANING_PERIOD: buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8; buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD; @@ -25,7 +23,7 @@ index 375df5060ed5..edbb956e81e8 100644 case SPS30_READ_DATA_READY_FLAG: case SPS30_READ_DATA: case SPS30_READ_SERIAL: -@@ -295,6 +296,8 @@ static int sps30_read_raw(struct iio_dev *indio_dev, +@@ -295,6 +296,8 @@ static int sps30_read_raw(struct iio_dev *val2 = 10000; return IIO_VAL_INT_PLUS_MICRO; diff --git a/target/linux/generic/backport-4.19/506-v5.1-iio-chemical-sps30-Explicity-truncate-constant-by-ma.patch b/target/linux/generic/backport-4.19/506-v5.1-iio-chemical-sps30-Explicity-truncate-constant-by-ma.patch index 6b31483070..e1f4a3b635 100644 --- a/target/linux/generic/backport-4.19/506-v5.1-iio-chemical-sps30-Explicity-truncate-constant-by-ma.patch +++ b/target/linux/generic/backport-4.19/506-v5.1-iio-chemical-sps30-Explicity-truncate-constant-by-ma.patch @@ -18,11 +18,9 @@ Acked-by: Tomasz Duszynski <tduszyns@gmail.com> drivers/iio/chemical/sps30.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c -index edbb956e81e8..acb9f8ecbb3d 100644 --- a/drivers/iio/chemical/sps30.c +++ b/drivers/iio/chemical/sps30.c -@@ -117,7 +117,7 @@ static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) +@@ -117,7 +117,7 @@ static int sps30_do_cmd(struct sps30_sta break; case SPS30_READ_AUTO_CLEANING_PERIOD: buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8; diff --git a/target/linux/generic/backport-4.19/507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch b/target/linux/generic/backport-4.19/507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch index a2b274f75e..c2b999b1cb 100644 --- a/target/linux/generic/backport-4.19/507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch +++ b/target/linux/generic/backport-4.19/507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch @@ -17,11 +17,9 @@ Signed-off-by: Petr Štetiar <ynezz@true.cz> drivers/iio/chemical/Kconfig | 2 ++ 1 file changed, 2 insertions(+) -diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig -index 0b91de4df8f4..a7e65a59bf42 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig -@@ -91,6 +91,8 @@ config SPS30 +@@ -65,6 +65,8 @@ config SPS30 tristate "SPS30 particulate matter sensor" depends on I2C select CRC8 diff --git a/target/linux/generic/hack-4.19/902-debloat_proc.patch b/target/linux/generic/hack-4.19/902-debloat_proc.patch index 1442cee8bb..0f4f445624 100644 --- a/target/linux/generic/hack-4.19/902-debloat_proc.patch +++ b/target/linux/generic/hack-4.19/902-debloat_proc.patch @@ -189,7 +189,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> } --- a/kernel/irq/proc.c +++ b/kernel/irq/proc.c -@@ -333,6 +333,9 @@ void register_irq_proc(unsigned int irq, +@@ -355,6 +355,9 @@ void register_irq_proc(unsigned int irq, void __maybe_unused *irqp = (void *)(unsigned long) irq; char name [MAX_NAMELEN]; @@ -199,7 +199,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip)) return; -@@ -386,6 +389,9 @@ void unregister_irq_proc(unsigned int ir +@@ -408,6 +411,9 @@ void unregister_irq_proc(unsigned int ir { char name [MAX_NAMELEN]; @@ -209,7 +209,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> if (!root_irq_dir || !desc->dir) return; #ifdef CONFIG_SMP -@@ -424,6 +430,9 @@ void init_irq_proc(void) +@@ -446,6 +452,9 @@ void init_irq_proc(void) unsigned int irq; struct irq_desc *desc; diff --git a/target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch index c35aca8a18..cfdfe10836 100644 --- a/target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch +++ b/target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch @@ -185,7 +185,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> cfg->fc_flags |= RTF_REJECT; if (rtm->rtm_type == RTN_LOCAL) -@@ -5084,6 +5115,8 @@ static int ip6_route_dev_notify(struct n +@@ -5085,6 +5116,8 @@ static int ip6_route_dev_notify(struct n #ifdef CONFIG_IPV6_MULTIPLE_TABLES net->ipv6.ip6_prohibit_entry->dst.dev = dev; net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev); @@ -194,7 +194,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> net->ipv6.ip6_blk_hole_entry->dst.dev = dev; net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev); #endif -@@ -5095,6 +5128,7 @@ static int ip6_route_dev_notify(struct n +@@ -5096,6 +5129,7 @@ static int ip6_route_dev_notify(struct n in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev); #ifdef CONFIG_IPV6_MULTIPLE_TABLES in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev); @@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev); #endif } -@@ -5289,6 +5323,15 @@ static int __net_init ip6_route_net_init +@@ -5290,6 +5324,15 @@ static int __net_init ip6_route_net_init net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops; dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst, ip6_template_metrics, true); @@ -218,7 +218,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> #endif net->ipv6.sysctl.flush_delay = 0; -@@ -5307,6 +5350,8 @@ out: +@@ -5308,6 +5351,8 @@ out: return ret; #ifdef CONFIG_IPV6_MULTIPLE_TABLES @@ -227,7 +227,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> out_ip6_prohibit_entry: kfree(net->ipv6.ip6_prohibit_entry); out_ip6_null_entry: -@@ -5327,6 +5372,7 @@ static void __net_exit ip6_route_net_exi +@@ -5328,6 +5373,7 @@ static void __net_exit ip6_route_net_exi #ifdef CONFIG_IPV6_MULTIPLE_TABLES kfree(net->ipv6.ip6_prohibit_entry); kfree(net->ipv6.ip6_blk_hole_entry); @@ -235,7 +235,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> #endif dst_entries_destroy(&net->ipv6.ip6_dst_ops); } -@@ -5403,6 +5449,9 @@ void __init ip6_route_init_special_entri +@@ -5404,6 +5450,9 @@ void __init ip6_route_init_special_entri init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev; init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); diff --git a/target/linux/ipq40xx/patches-4.19/087-v5.6-mtd-spi-nor-Add-4B_OPCODES-flag-to-w25q256.patch b/target/linux/ipq40xx/patches-4.19/087-v5.6-mtd-spi-nor-Add-4B_OPCODES-flag-to-w25q256.patch index 03fae840cd..8730bb4ac3 100644 --- a/target/linux/ipq40xx/patches-4.19/087-v5.6-mtd-spi-nor-Add-4B_OPCODES-flag-to-w25q256.patch +++ b/target/linux/ipq40xx/patches-4.19/087-v5.6-mtd-spi-nor-Add-4B_OPCODES-flag-to-w25q256.patch @@ -14,7 +14,7 @@ Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1252,7 +1252,9 @@ static const struct flash_info spi_nor_i +@@ -1257,7 +1257,9 @@ static const struct flash_info spi_nor_i { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, diff --git a/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch b/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch index 6f7a3a693b..4cabfc8f59 100644 --- a/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch +++ b/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch @@ -8,7 +8,7 @@ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, -@@ -1284,11 +1285,12 @@ static const struct flash_info spi_nor_i +@@ -1286,11 +1287,12 @@ static const struct flash_info spi_nor_i { }, }; @@ -23,7 +23,7 @@ tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); if (tmp < 0) { -@@ -1299,10 +1301,16 @@ static const struct flash_info *spi_nor_ +@@ -1301,10 +1303,16 @@ static const struct flash_info *spi_nor_ for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { info = &spi_nor_ids[tmp]; if (info->id_len) { @@ -42,7 +42,7 @@ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n", id[0], id[1], id[2]); return ERR_PTR(-ENODEV); -@@ -2836,7 +2844,7 @@ int spi_nor_scan(struct spi_nor *nor, co +@@ -2838,7 +2846,7 @@ int spi_nor_scan(struct spi_nor *nor, co info = spi_nor_match_id(name); /* Try to auto-detect if chip name wasn't specified or not found */ if (!info) @@ -51,7 +51,7 @@ if (IS_ERR_OR_NULL(info)) return -ENOENT; -@@ -2847,7 +2855,7 @@ int spi_nor_scan(struct spi_nor *nor, co +@@ -2849,7 +2857,7 @@ int spi_nor_scan(struct spi_nor *nor, co if (name && info->id_len) { const struct flash_info *jinfo; diff --git a/target/linux/mediatek/patches-4.19/0900-bt-mtk-serial-fix.patch b/target/linux/mediatek/patches-4.19/0900-bt-mtk-serial-fix.patch index 330d2a5b77..6d4cce276b 100644 --- a/target/linux/mediatek/patches-4.19/0900-bt-mtk-serial-fix.patch +++ b/target/linux/mediatek/patches-4.19/0900-bt-mtk-serial-fix.patch @@ -19,7 +19,7 @@ }, [PORT_NPCM] = { .name = "Nuvoton 16550", -@@ -2644,6 +2644,11 @@ serial8250_do_set_termios(struct uart_po +@@ -2648,6 +2648,11 @@ serial8250_do_set_termios(struct uart_po unsigned long flags; unsigned int baud, quot, frac = 0; |