diff options
Diffstat (limited to 'target')
7 files changed, 531 insertions, 0 deletions
diff --git a/target/linux/ipq807x/base-files/etc/board.d/01_leds b/target/linux/ipq807x/base-files/etc/board.d/01_leds new file mode 100644 index 0000000000..215ab7ca21 --- /dev/null +++ b/target/linux/ipq807x/base-files/etc/board.d/01_leds @@ -0,0 +1,16 @@ + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) + +case "$board" in +xiaomi,ax3600) + ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network new file mode 100644 index 0000000000..4dc118ed29 --- /dev/null +++ b/target/linux/ipq807x/base-files/etc/board.d/02_network @@ -0,0 +1,28 @@ +# +# Copyright (c) 2015 The Linux Foundation. All rights reserved. +# Copyright (c) 2011-2015 OpenWrt.org +# + +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ipq807x_setup_interfaces() +{ + local board="$1" + + case "$board" in + xiaomi,ax3600) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" + ;; + *) + echo "Unsupported hardware. Network interfaces not initialized" + ;; + esac +} + +board_config_update +board=$(board_name) +ipq807x_setup_interfaces $board +board_config_flush + +exit 0 diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata new file mode 100644 index 0000000000..578ff7ad45 --- /dev/null +++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -0,0 +1,20 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh + +board=$(board_name) + +case "$FIRMWARE" in +"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin") + case "$board" in + xiaomi,ax3600) + caldata_extract "0:art" 0x1000 0x20000 + ;; + esac + ;; +*) + exit 1 + ;; +esac diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000000..d63e71251b --- /dev/null +++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh @@ -0,0 +1,65 @@ +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +RAMFS_COPY_BIN='fw_printenv fw_setenv' +RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' + +xiaomi_initramfs_prepare() { + # Wipe UBI if running initramfs + [ "$(rootfs_type)" = "tmpfs" ] || return 0 + + local rootfs_mtdnum="$( find_mtd_index rootfs )" + if [ ! "$rootfs_mtdnum" ]; then + echo "unable to find mtd partition rootfs" + return 1 + fi + + local kern_mtdnum="$( find_mtd_index ubi_kernel )" + if [ ! "$kern_mtdnum" ]; then + echo "unable to find mtd partition ubi_kernel" + return 1 + fi + + ubidetach -m "$rootfs_mtdnum" + ubiformat /dev/mtd$rootfs_mtdnum -y + + ubidetach -m "$kern_mtdnum" + ubiformat /dev/mtd$kern_mtdnum -y +} + +platform_check_image() { + return 0; +} + +platform_pre_upgrade() { + case "$(board_name)" in + xiaomi,ax3600) + xiaomi_initramfs_prepare + ;; + esac +} + +platform_do_upgrade() { + case "$(board_name)" in + xiaomi,ax3600) + # Make sure that UART is enabled + fw_setenv boot_wait on + fw_setenv uart_en 1 + + # Enforce single partition. + fw_setenv flag_boot_rootfs 0 + fw_setenv flag_last_success 0 + fw_setenv flag_boot_success 1 + fw_setenv flag_try_sys1_failed 8 + fw_setenv flag_try_sys2_failed 8 + + # Kernel and rootfs are placed in 2 different UBI + CI_KERN_UBIPART="ubi_kernel" + CI_ROOT_UBIPART="rootfs" + nand_do_upgrade "$1" + ;; + *) + default_do_upgrade "$1" + ;; + esac +} diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts new file mode 100644 index 0000000000..f3e82e2251 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */ + +/dts-v1/; + +#include "ipq8071-ax3600.dtsi" + +/ { + model = "Xiaomi AX3600"; + compatible = "xiaomi,ax3600", "qcom,ipq8074"; + + leds { + compatible = "gpio-leds"; + + led_system_blue: system-blue { + label = "blue:system"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + }; + + led_system_yellow: system-yellow { + label = "yellow:system"; + gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; + }; + + network-yellow { + label = "yellow:network"; + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; + }; + + network-blue { + label = "blue:network"; + gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + }; + + aiot { + label = "blue:aiot"; + gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&pcie_qmp0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + + perst-gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi0: wifi@1,0 { + status = "okay"; + + compatible = "qcom,ath10k"; + reg = <0x00010000 0 0 0 0>; + + qcom,ath10k-calibration-variant = "Xiaomi-AX3600"; + nvmem-cell-names = "calibration"; + nvmem-cells = <&caldata_qca9889>; + }; + }; +}; + +&wifi { + qcom,ath11k-calibration-variant = "Xiaomi-AX3600"; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi new file mode 100644 index 0000000000..c18cef52f3 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */ + +#include "ipq8074-512m.dtsi" +#include "ipq8074-ac-cpu.dtsi" +#include "ipq8074-ess.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + serial0 = &blsp1_uart5; + led-boot = &led_system_yellow; + led-failsafe = &led_system_yellow; + led-running = &led_system_blue; + led-upgrade = &led_system_yellow; + label-mac-device = &dp2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " root=/dev/ubiblock0_0"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&tlmm { + mdio_pins: mdio-pins { + mdc { + pins = "gpio68"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio { + pins = "gpio69"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; + +&blsp1_uart5 { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + /* + * Bootloader will find the NAND DT node by the compatible and + * then "fixup" it by adding the partitions from the SMEM table + * using the legacy bindings thus making it impossible for us + * to change the partition table or utilize NVMEM for calibration. + * So add a dummy partitions node that bootloader will populate + * and set it as disabled so the kernel ignores it instead of + * printing warnings due to the broken way bootloader adds the + * partitions. + */ + partitions { + status = "disabled"; + }; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:sbl1"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "0:mibib"; + reg = <0x100000 0x100000>; + read-only; + }; + + partition@200000 { + label = "0:qsee"; + reg = <0x200000 0x300000>; + read-only; + }; + + partition@500000 { + label = "0:devcfg"; + reg = <0x500000 0x80000>; + read-only; + }; + + partition@580000 { + label = "0:rpm"; + reg = <0x580000 0x80000>; + read-only; + }; + + partition@600000 { + label = "0:cdt"; + reg = <0x600000 0x80000>; + read-only; + }; + + partition@680000 { + label = "0:appsblenv"; + reg = <0x680000 0x80000>; + }; + + partition@700000 { + label = "0:appsbl"; + reg = <0x700000 0x100000>; + read-only; + }; + + partition@800000 { + label = "0:art"; + reg = <0x800000 0x80000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_dp2: macaddr@6 { + reg = <0x6 0x6>; + }; + + macaddr_dp3: macaddr@c { + reg = <0xc 0x6>; + }; + + macaddr_dp4: macaddr@12 { + reg = <0x12 0x6>; + }; + + macaddr_dp5: macaddr@18 { + reg = <0x18 0x6>; + }; + + caldata_qca9889: caldata@4d000 { + reg = <0x33000 0x844>; + }; + }; + + partition@880000 { + label = "bdata"; + reg = <0x880000 0x80000>; + }; + + partition@900000 { + /* This is crash + crash_syslog parts combined */ + label = "pstore"; + reg = <0x900000 0x100000>; + }; + + /* Make the first rootfs a dedicated ubi partition for kernel */ + partition@a00000 { + label = "ubi_kernel"; + reg = <0xa00000 0x23c0000>; + }; + + /* Place the real rootfs in the original second rootfs and + * expand it to the end of the nand + */ + rootfs: partition@2dc0000 { + label = "rootfs"; + reg = <0x2dc0000 0xd240000>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + + qca8075_1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + + qca8075_2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + + qca8075_3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + }; + + qca8075_4: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; +}; + +&switch { + status = "okay"; + + switch_cpu_bmp = <0x1>; /* cpu port bitmap */ + switch_lan_bmp = <0x1e>; /* lan port bitmap */ + switch_wan_bmp = <0x20>; /* wan port bitmap */ + switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/ + switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/ + switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/ + bm_tick_mode = <0>; /* bm tick mode */ + tm_tick_mode = <0>; /* tm tick mode */ + + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <0>; + }; + port@1 { + port_id = <2>; + phy_address = <1>; + }; + port@2 { + port_id = <3>; + phy_address = <2>; + }; + port@3 { + port_id = <4>; + phy_address = <3>; + }; + port@4 { + port_id = <5>; + phy_address = <4>; + }; + }; +}; + +&edma { + status = "okay"; +}; + +&dp2 { + status = "okay"; + phy-handle = <&qca8075_1>; + label = "wan"; + nvmem-cells = <&macaddr_dp2>; + nvmem-cell-names = "mac-address"; +}; + +&dp3 { + status = "okay"; + phy-handle = <&qca8075_2>; + label = "lan1"; + nvmem-cells = <&macaddr_dp3>; + nvmem-cell-names = "mac-address"; +}; + +&dp4 { + status = "okay"; + phy-handle = <&qca8075_3>; + label = "lan2"; + nvmem-cells = <&macaddr_dp4>; + nvmem-cell-names = "mac-address"; +}; + +&dp5 { + status = "okay"; + phy-handle = <&qca8075_4>; + label = "lan3"; + nvmem-cells = <&macaddr_dp5>; + nvmem-cell-names = "mac-address"; +}; + +&wifi { + status = "okay"; + + qcom,ath11k-fw-memory-mode = <1>; +}; diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk index 91a3daeedf..11cca54506 100644 --- a/target/linux/ipq807x/image/generic.mk +++ b/target/linux/ipq807x/image/generic.mk @@ -16,3 +16,21 @@ define Device/UbiFit IMAGE/factory.ubi := append-ubi IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef + +define Device/xiaomi_ax3600 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := Xiaomi + DEVICE_MODEL := AX3600 + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_DTS_CONFIG := config@ac04 + SOC := ipq8071 + KERNEL_SIZE := 36608k + DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct +ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) + ARTIFACTS := initramfs-factory.ubi + ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel +endif +endef +TARGET_DEVICES += xiaomi_ax3600 |