aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
-rw-r--r--target/linux/ath79/dts/ar9330_pqi-air-pen.dts147
-rw-r--r--target/linux/ath79/image/tiny.mk9
4 files changed, 160 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index b4699933da..5f02c5769a 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ ath79_setup_interfaces()
ocedo,raccoon|\
pcs,cap324|\
pisen,wmm003n|\
+ pqi,air-pen|\
tplink,re450-v2|\
tplink,tl-mr10u|\
tplink,tl-mr3020-v1|\
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 30de434ae1..020abe2913 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -146,6 +146,9 @@ case "$FIRMWARE" in
ubnt,rocket-m)
ath9k_eeprom_extract "art" 4096 4096
;;
+ pqi,air-pen)
+ ath9k_eeprom_extract "art" 4096 2002
+ ;;
ubnt,unifi)
ath9k_eeprom_extract "art" 4096 2048
;;
diff --git a/target/linux/ath79/dts/ar9330_pqi-air-pen.dts b/target/linux/ath79/dts/ar9330_pqi-air-pen.dts
new file mode 100644
index 0000000000..6c662d2202
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_pqi-air-pen.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9330.dtsi"
+
+/ {
+ model = "PQI Air-Pen";
+ compatible = "pqi,air-pen", "qca,ar9330";
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &wlan;
+ led-failsafe = &wlan;
+ led-upgrade = &wlan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan: wlan {
+ label = "air-pen:blue:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps {
+ label = "air-pen:blue:wps";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "NVRAM";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "firmware";
+ reg = <0x070000 0x780000>;
+ };
+
+ partition@7f0000 {
+ label = "CONF";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x1002>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x2>;
+};
diff --git a/target/linux/ath79/image/tiny.mk b/target/linux/ath79/image/tiny.mk
index bc738c2f77..4dda24edac 100644
--- a/target/linux/ath79/image/tiny.mk
+++ b/target/linux/ath79/image/tiny.mk
@@ -30,3 +30,12 @@ define Device/buffalo_whr-g301n
SUPPORTED_DEVICES += whr-g301n
endef
TARGET_DEVICES += buffalo_whr-g301n
+
+define Device/pqi_air-pen
+ ATH_SOC := ar9330
+ DEVICE_TITLE := PQI Air-Pen
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ IMAGE_SIZE := 7680k
+ SUPPORTED_DEVICES += pqi-air-pen
+endef
+TARGET_DEVICES += pqi_air-pen