diff options
Diffstat (limited to 'target')
5 files changed, 55 insertions, 81 deletions
diff --git a/target/linux/imx6/config-3.10 b/target/linux/imx6/config-3.10 index 1a1d30ae92..7978cd8077 100644 --- a/target/linux/imx6/config-3.10 +++ b/target/linux/imx6/config-3.10 @@ -170,7 +170,7 @@ CONFIG_I2C_IMX=y # CONFIG_IMX2_WDT is not set # CONFIG_IMX_DMA is not set CONFIG_IMX_PCIE=y -CONFIG_IMX_SDMA=y +# CONFIG_IMX_SDMA is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQCHIP=y CONFIG_IRQ_DOMAIN=y @@ -213,8 +213,7 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MULTI_IRQ_HANDLER=y CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_MX3_IPU=y -CONFIG_MX3_IPU_IRQS=4 +# CONFIG_MX3_IPU is not set # CONFIG_MXC_DEBUG_BOARD is not set # CONFIG_MXC_IRQ_PRIOR is not set CONFIG_MXS_DMA=y diff --git a/target/linux/imx6/patches-3.10/0003-usb-chipidea-enable-to-build-host-support-as-module.patch b/target/linux/imx6/patches-3.10/0003-usb-chipidea-enable-to-build-host-support-as-module.patch deleted file mode 100644 index e5cac57d72..0000000000 --- a/target/linux/imx6/patches-3.10/0003-usb-chipidea-enable-to-build-host-support-as-module.patch +++ /dev/null @@ -1,27 +0,0 @@ -From f51ac206b1ca27d240fe7fde6975496d558f51df Mon Sep 17 00:00:00 2001 -From: Luka Perkov <luka@openwrt.org> -Date: Sun, 4 Aug 2013 03:10:59 +0200 -Subject: [PATCH] usb: chipidea: enable to build host support as module - -USB_CHIPIDEA_HOST does not need to depend on USB=y, USB_CHIPIDEA_HOST will work -just fine even if USB=m is used. The depends line can be safely removed since -USB_CHIPIDEA already depends on USB. - -Tested on Gateworks imx6q Ventana board (gw-5400-a) and imx6dl Wandboard Dual -(imx6dl-wandboard). - -Signed-off-by: Luka Perkov <luka@openwrt.org> ---- - drivers/usb/chipidea/Kconfig | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/usb/chipidea/Kconfig -+++ b/drivers/usb/chipidea/Kconfig -@@ -19,7 +19,6 @@ config USB_CHIPIDEA_UDC - - config USB_CHIPIDEA_HOST - bool "ChipIdea host controller" -- depends on USB=y - depends on USB_EHCI_HCD=y || (USB_CHIPIDEA=m && USB_EHCI_HCD=m) - select USB_EHCI_ROOT_HUB_TT - help diff --git a/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch b/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch new file mode 100644 index 0000000000..40968ab4da --- /dev/null +++ b/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch @@ -0,0 +1,53 @@ +From a0cfdc6bc73bc47b63b05b850cf66cf67f2487bf Mon Sep 17 00:00:00 2001 +From: Lothar Waßmann <LW@KARO-electronics.de> +Date: Wed, 14 Aug 2013 12:43:58 +0300 +Subject: [PATCH] usb: chipidea: improve kconfig 2.0 + +This patch provides a cleaner solution to the problem described in +commit 20a677fd ("usb: chipidea: improve kconfig"). + +The goal to be achieved is to force USB_CHIPIDEA=m if either +USB_EHCI_HCD=m or USB_GADGET=m. +If both are 'y' USB_CHIPIDEA may be selected to be 'm' or 'y'. + +The old patch had the drawback, that USB_CHIPIDEA could be chosen as +'y' though USB_EHCI_HCD or USB_GADGET (or both) were 'm' leading to a +situation where USB_CHIPIDEA_HOST or USB_CHIPIDEA_UDC vanished from +the config options producing a compilable but dysfunctional driver. + +Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> +Reviewed-by: Peter Chen <peter.chen@freescale.com> +Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/chipidea/Kconfig | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +--- a/drivers/usb/chipidea/Kconfig ++++ b/drivers/usb/chipidea/Kconfig +@@ -1,6 +1,6 @@ + config USB_CHIPIDEA + tristate "ChipIdea Highspeed Dual Role Controller" +- depends on USB || USB_GADGET ++ depends on (USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET) + help + Say Y here if your system has a dual role high speed USB + controller based on ChipIdea silicon IP. Currently, only the +@@ -12,15 +12,14 @@ if USB_CHIPIDEA + + config USB_CHIPIDEA_UDC + bool "ChipIdea device controller" +- depends on USB_GADGET=y || (USB_CHIPIDEA=m && USB_GADGET=m) ++ depends on USB_GADGET + help + Say Y here to enable device controller functionality of the + ChipIdea driver. + + config USB_CHIPIDEA_HOST + bool "ChipIdea host controller" +- depends on USB=y +- depends on USB_EHCI_HCD=y || (USB_CHIPIDEA=m && USB_EHCI_HCD=m) ++ depends on USB_EHCI_HCD + select USB_EHCI_ROOT_HUB_TT + help + Say Y here to enable host controller functionality of the diff --git a/target/linux/imx6/patches-3.10/0004-ARM-dts-imx6sl-imx6qdl-use-the-same-SDMA-firmware.patch b/target/linux/imx6/patches-3.10/0004-ARM-dts-imx6sl-imx6qdl-use-the-same-SDMA-firmware.patch deleted file mode 100644 index 8b1126f865..0000000000 --- a/target/linux/imx6/patches-3.10/0004-ARM-dts-imx6sl-imx6qdl-use-the-same-SDMA-firmware.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 1e8efc07613f5fbf59ad7e580132c473a9b1d3eb Mon Sep 17 00:00:00 2001 -From: Luka Perkov <luka@openwrt.org> -Date: Sun, 11 Aug 2013 13:13:16 +0200 -Subject: [PATCH 2/3] ARM: dts: imx6sl/imx6qdl: use the same SDMA firmware - -Patch for SDMA firmware sent by Fabio Estevam in January [1] didn't make -upstream. Nonetheless, it was pointed out that all imx6 use the same SDMA -firmware [2]. Reflect this fact in appropriate .dtsi files. - -[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/143025.html -[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/143150.html - -Signed-off-by: Luka Perkov <luka@openwrt.org> ---- - arch/arm/boot/dts/imx6qdl.dtsi | 2 +- - arch/arm/boot/dts/imx6sl.dtsi | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/imx6qdl.dtsi -+++ b/arch/arm/boot/dts/imx6qdl.dtsi -@@ -580,7 +580,7 @@ - interrupts = <0 2 0x04>; - clocks = <&clks 155>, <&clks 155>; - clock-names = "ipg", "ahb"; -- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; -+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6.bin"; - }; - }; - diff --git a/target/linux/imx6/patches-3.10/101-sdma.patch b/target/linux/imx6/patches-3.10/101-sdma.patch deleted file mode 100644 index 2c69b93bed..0000000000 --- a/target/linux/imx6/patches-3.10/101-sdma.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 2714c54667f4e9267e7ee9a7f27fa9184d570459 Mon Sep 17 00:00:00 2001 -From: Luka Perkov <luka@openwrt.org> -Date: Sun, 11 Aug 2013 16:14:39 +0200 -Subject: [PATCH 3/3] sdma: keep the firmware binaries in firmware directory - -Signed-off-by: Luka Perkov <luka@openwrt.org> ---- - arch/arm/boot/dts/imx6qdl.dtsi | 2 +- - arch/arm/boot/dts/imx6sl.dtsi | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/imx6qdl.dtsi -+++ b/arch/arm/boot/dts/imx6qdl.dtsi -@@ -580,7 +580,7 @@ - interrupts = <0 2 0x04>; - clocks = <&clks 155>, <&clks 155>; - clock-names = "ipg", "ahb"; -- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6.bin"; -+ fsl,sdma-ram-script-name = "sdma-imx6.bin"; - }; - }; - |