aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ramips/dts/mt7621_yuncore_ax820.dts32
1 files changed, 26 insertions, 6 deletions
diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
index fe0e9daf7f..9638f1f060 100644
--- a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
+++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
@@ -10,10 +10,10 @@
model = "YunCore AX820";
aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_green;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
};
chosen {
@@ -23,10 +23,30 @@
leds {
compatible = "gpio-leds";
- led_status_green: status_green {
- label = "green:status";
+ /* At least 2 AX820 variants are known and cannot be distinguished (same hw rev):
+ - System LED green GPIO 15; red and blue apparently not connected
+ - System LED red GPIO 15, WLAN2G LED green GPIO 14, WLAN5G LED blue GPIO 16
+ The canonical values taken from a Yuncore datasheet are:
+ - System LED green GPIO 15, WLAN2G LED blue GPIO 14, WLAN5G LED red GPIO 16
+ All 3 colors relate to the same single RGB LED showing up on the front lightpipe.
+ As a result, all 3 LEDs are defined even if only one may be available, and
+ the color information is absent as it is not reliable */
+ wlan2g {
+ label = "wlan2g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0radio";
+ };
+
+ led_system: system {
+ label = "system";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
+
+ wlan5g {
+ label = "wlan5g";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1radio";
+ };
};
watchdog {