diff options
Diffstat (limited to 'target')
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 3 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 4 | ||||
-rw-r--r-- | target/linux/ramips/dts/ArcherC50V4.dts | 99 | ||||
-rw-r--r-- | target/linux/ramips/dts/TPLINK-8M-SPLIT-UBOOT.dtsi | 90 | ||||
-rw-r--r-- | target/linux/ramips/image/mt76x8.mk | 15 |
6 files changed, 211 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index d5238776c2..e36f125126 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -336,7 +336,8 @@ tplink,c20-v4) ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0" ;; -tplink,c50-v3) +tplink,c50-v3|\ +tplink,c50-v4) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 80940db763..74938121a8 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -229,6 +229,7 @@ ramips_setup_interfaces() skylab,skw92a|\ tplink,c20-v4|\ tplink,c50-v3|\ + tplink,c50-v4|\ tplink,tl-mr3420-v5|\ tplink,tl-wr842n-v5|\ tl-wr840n-v4|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a50e943bc9..14e9ac3d14 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -44,6 +44,10 @@ platform_do_upgrade() { ubnt-erx-sfp) nand_do_upgrade "$ARGV" ;; + tplink,c50-v4) + MTD_ARGS="-t romfile" + default_do_upgrade "$ARGV" + ;; *) default_do_upgrade "$ARGV" ;; diff --git a/target/linux/ramips/dts/ArcherC50V4.dts b/target/linux/ramips/dts/ArcherC50V4.dts new file mode 100644 index 0000000000..37f388620e --- /dev/null +++ b/target/linux/ramips/dts/ArcherC50V4.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "TPLINK-8M-SPLIT-UBOOT.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "tplink,c50-v4", "mediatek,mt7628an-soc"; + model = "TP-Link Archer C50 v4"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "c50-v4:green:power"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan2 { + label = "c50-v4:green:wlan2g"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + wlan5 { + label = "c50-v4:green:wlan5g"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "c50-v4:green:lan"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "c50-v4:green:wan"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + wan_orange { + label = "c50-v4:orange:wan"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "c50-v4:green:wps"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "p0led_an", "p1led_an", "p2led_an", + "p3led_an", "p4led_an", "wdt", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&radio 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <(-1)>; + }; +}; diff --git a/target/linux/ramips/dts/TPLINK-8M-SPLIT-UBOOT.dtsi b/target/linux/ramips/dts/TPLINK-8M-SPLIT-UBOOT.dtsi new file mode 100644 index 0000000000..539f476dce --- /dev/null +++ b/target/linux/ramips/dts/TPLINK-8M-SPLIT-UBOOT.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include "mt7628an.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "factory-uboot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "boot"; + reg = <0x30000 0x20000>; + read-only; + }; + + partition@50000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x50000 0x770000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + read-only; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; + +&wmac { + status = "okay"; + mtd-mac-address = <&rom 0xf100>; + mediatek,mtd-eeprom = <&radio 0x0>; +}; + +ðernet { + mtd-mac-address = <&rom 0xf100>; + mediatek,portmap = "llllw"; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 8b0fe3b38e..0c18641ca0 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -247,6 +247,21 @@ define Device/tplink_c50-v3 endef TARGET_DEVICES += tplink_c50-v3 +define Device/tplink_c50-v4 + $(Device/tplink) + DTS := ArcherC50V4 + IMAGE_SIZE := 7616k + DEVICE_TITLE := TP-Link ArcherC50 v4 + TPLINK_FLASHLAYOUT := 8MSUmtk + TPLINK_HWID := 0x001D589B + TPLINK_HWREV := 0x93 + TPLINK_HWREVADD := 0x2 + TPLINK_HVERSION := 3 + DEVICE_PACKAGES := kmod-mt76x2 + IMAGES := sysupgrade.bin +endef +TARGET_DEVICES += tplink_c50-v4 + define Device/tplink_tl-mr3020-v3 $(Device/tplink) DTS := TL-MR3020V3 |