diff options
Diffstat (limited to 'target')
44 files changed, 4683 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/patches-5.10/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.10/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch new file mode 100644 index 0000000000..8aa71f360f --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch @@ -0,0 +1,42 @@ +From f125e2d4339dda6937865f975470b29c84714c9b Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@gmail.com> +Date: Mon, 6 Jan 2020 14:57:15 +0100 +Subject: [PATCH] ARM: qcom: Add support for IPQ40xx + +Add support for the Qualcomm IPQ40xx SoC in Kconfig. +Also add its appropriate textofs. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +Signed-off-by: John Crispin <john@phrozen.org> +Tested-by: Robert Marko <robert.marko@sartura.hr> +Cc: Luka Perkov <luka.perkov@sartura.hr> +Signed-off-by: Arnd Bergmann <arnd@arndb.de> +--- + arch/arm/Makefile | 1 + + arch/arm/mach-qcom/Kconfig | 5 +++++ + 2 files changed, 6 insertions(+) + +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x001 + ifeq ($(CONFIG_ARCH_SA1100),y) + textofs-$(CONFIG_SA1111) := 0x00208000 + endif ++textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 + textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 + textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 + textofs-$(CONFIG_ARCH_MESON) := 0x00208000 +--- a/arch/arm/mach-qcom/Kconfig ++++ b/arch/arm/mach-qcom/Kconfig +@@ -12,6 +12,11 @@ menuconfig ARCH_QCOM + + if ARCH_QCOM + ++config ARCH_IPQ40XX ++ bool "Enable support for IPQ40XX" ++ select CLKSRC_QCOM ++ select HAVE_ARM_ARCH_TIMER ++ + config ARCH_MSM8X60 + bool "Enable support for MSM8X60" + select CLKSRC_QCOM diff --git a/target/linux/ipq40xx/patches-5.10/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch b/target/linux/ipq40xx/patches-5.10/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch new file mode 100644 index 0000000000..aaf8c807ed --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch @@ -0,0 +1,153 @@ +From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Wed, 22 Jan 2020 12:44:14 +0100 +Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17 + 00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> Date: Sun, 12 Jan + 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO + driver + +This introduces the IPQ4019 VQMMC LDO driver needed for +the SD/EMMC driver I/O level operation. +This will enable introducing SD/EMMC support for the built-in controller. + +Signed-off-by: Mantas Pucka <mantas@8devices.com> +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr +Signed-off-by: Mark Brown <broonie@kernel.org> +--- + drivers/regulator/Kconfig | 7 ++ + drivers/regulator/Makefile | 1 + + drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++ + 3 files changed, 109 insertions(+) + create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c + +--- a/drivers/regulator/Kconfig ++++ b/drivers/regulator/Kconfig +@@ -1077,6 +1077,13 @@ config REGULATOR_VEXPRESS + This driver provides support for voltage regulators available + on the ARM Ltd's Versatile Express platform. + ++config REGULATOR_VQMMC_IPQ4019 ++ tristate "IPQ4019 VQMMC SD LDO regulator support" ++ depends on ARCH_QCOM ++ help ++ This driver provides support for the VQMMC LDO I/0 ++ voltage regulator of the IPQ4019 SD/EMMC controller. ++ + config REGULATOR_WM831X + tristate "Wolfson Microelectronics WM831x PMIC regulators" + depends on MFD_WM831X +--- a/drivers/regulator/Makefile ++++ b/drivers/regulator/Makefile +@@ -132,6 +132,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r + obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o + obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o + obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o ++obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o + obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o + obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o + obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o +--- /dev/null ++++ b/drivers/regulator/vqmmc-ipq4019-regulator.c +@@ -0,0 +1,101 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++// ++// Copyright (c) 2019 Mantas Pucka <mantas@8devices.com> ++// Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr> ++// ++// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator ++ ++#include <linux/io.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++#include <linux/regmap.h> ++#include <linux/regulator/driver.h> ++#include <linux/regulator/machine.h> ++#include <linux/regulator/of_regulator.h> ++ ++static const unsigned int ipq4019_vmmc_voltages[] = { ++ 1500000, 1800000, 2500000, 3000000, ++}; ++ ++static const struct regulator_ops ipq4019_regulator_voltage_ops = { ++ .list_voltage = regulator_list_voltage_table, ++ .map_voltage = regulator_map_voltage_ascend, ++ .get_voltage_sel = regulator_get_voltage_sel_regmap, ++ .set_voltage_sel = regulator_set_voltage_sel_regmap, ++}; ++ ++static const struct regulator_desc vmmc_regulator = { ++ .name = "vmmcq", ++ .ops = &ipq4019_regulator_voltage_ops, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++ .volt_table = ipq4019_vmmc_voltages, ++ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages), ++ .vsel_reg = 0, ++ .vsel_mask = 0x3, ++}; ++ ++static const struct regmap_config ipq4019_vmmcq_regmap_config = { ++ .reg_bits = 32, ++ .reg_stride = 4, ++ .val_bits = 32, ++}; ++ ++static int ipq4019_regulator_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct regulator_init_data *init_data; ++ struct regulator_config cfg = {}; ++ struct regulator_dev *rdev; ++ struct resource *res; ++ struct regmap *rmap; ++ void __iomem *base; ++ ++ init_data = of_get_regulator_init_data(dev, dev->of_node, ++ &vmmc_regulator); ++ if (!init_data) ++ return -EINVAL; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config); ++ if (IS_ERR(rmap)) ++ return PTR_ERR(rmap); ++ ++ cfg.dev = dev; ++ cfg.init_data = init_data; ++ cfg.of_node = dev->of_node; ++ cfg.regmap = rmap; ++ ++ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg); ++ if (IS_ERR(rdev)) { ++ dev_err(dev, "Failed to register regulator: %ld\n", ++ PTR_ERR(rdev)); ++ return PTR_ERR(rdev); ++ } ++ platform_set_drvdata(pdev, rdev); ++ ++ return 0; ++} ++ ++static const struct of_device_id regulator_ipq4019_of_match[] = { ++ { .compatible = "qcom,vqmmc-ipq4019-regulator", }, ++ {}, ++}; ++ ++static struct platform_driver ipq4019_regulator_driver = { ++ .probe = ipq4019_regulator_probe, ++ .driver = { ++ .name = "vqmmc-ipq4019-regulator", ++ .of_match_table = of_match_ptr(regulator_ipq4019_of_match), ++ }, ++}; ++module_platform_driver(ipq4019_regulator_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>"); ++MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator"); diff --git a/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch b/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch new file mode 100644 index 0000000000..25fce8daf0 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch @@ -0,0 +1,36 @@ +From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Thu, 15 Aug 2019 19:28:23 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node + +IPQ4019 has a built in SD/eMMC controller which is supported by the +SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding. +So lets add the appropriate node for it. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -206,6 +206,18 @@ + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + }; + ++ sdhci: sdhci@7824900 { ++ compatible = "qcom,sdhci-msm-v4"; ++ reg = <0x7824900 0x11c>, <0x7824000 0x800>; ++ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "hc_irq", "pwr_irq"; ++ bus-width = <8>; ++ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, ++ <&gcc GCC_DCD_XO_CLK>; ++ clock-names = "core", "iface", "xo"; ++ status = "disabled"; ++ }; ++ + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; diff --git a/target/linux/ipq40xx/patches-5.10/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.10/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch new file mode 100644 index 0000000000..3a4127febf --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch @@ -0,0 +1,71 @@ +From 5e4548922009870a38bcf1d887317676d4e08f54 Mon Sep 17 00:00:00 2001 +From: Damir Franusic <damir.franusic@sartura.hr> +Date: Thu, 21 Nov 2019 16:29:02 +0100 +Subject: [PATCH] ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx + +Add missing nodes and properties to enable SMP +support on IPQ40xx devices. + +Booting without "saw_l2" node: + +[ 0.001400] CPU: Testing write buffer coherency: ok +[ 0.001856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 +[ 0.060163] Setting up static identity map for 0x80300000 - 0x80300060 +[ 0.080140] rcu: Hierarchical SRCU implementation. +[ 0.120258] smp: Bringing up secondary CPUs ... +[ 0.200540] CPU1: failed to boot: -19 +[ 0.280689] CPU2: failed to boot: -19 +[ 0.360874] CPU3: failed to boot: -19 +[ 0.360966] smp: Brought up 1 node, 1 CPU +[ 0.360979] SMP: Total of 1 processors activated (96.00 BogoMIPS). +[ 0.360988] CPU: All CPU(s) started in SVC mode. + +Then, booting with "saw_l2" node present (this patch applied): + +[ 0.001450] CPU: Testing write buffer coherency: ok +[ 0.001904] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 +[ 0.060161] Setting up static identity map for 0x80300000 - 0x80300060 +[ 0.080137] rcu: Hierarchical SRCU implementation. +[ 0.120252] smp: Bringing up secondary CPUs ... +[ 0.200958] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 +[ 0.281091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 +[ 0.361264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 +[ 0.361430] smp: Brought up 1 node, 4 CPUs +[ 0.361460] SMP: Total of 4 processors activated (384.00 BogoMIPS). +[ 0.361469] CPU: All CPU(s) started in SVC mode. + +Signed-off-by: Damir Franusic <damir.franusic@sartura.hr> +Cc: Luka Perkov <luka.perkov@sartura.hr> +Cc: Robert Marko <robert.marko@sartura.hr> +Cc: Andy Gross <agross@kernel.org> +Cc: Rob Herring <robh+dt@kernel.org> +Cc: linux-arm-msm@vger.kernel.org +Link: https://lore.kernel.org/r/20191121152902.21394-1-damir.franusic@gmail.com +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -102,6 +102,7 @@ + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; ++ qcom,saw = <&saw_l2>; + }; + }; + +@@ -353,6 +354,12 @@ + regulator; + }; + ++ saw_l2: regulator@b012000 { ++ compatible = "qcom,saw2"; ++ reg = <0xb012000 0x1000>; ++ regulator; ++ }; ++ + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; diff --git a/target/linux/ipq40xx/patches-5.10/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-5.10/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch new file mode 100644 index 0000000000..6922bc8ff3 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch @@ -0,0 +1,119 @@ +From 8b99dc0922618062a1589ebd74df6108b4f9ac22 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@gmail.com> +Date: Wed, 8 Jan 2020 13:54:55 +0100 +Subject: [PATCH] ARM: dts: qcom: add gpio-ranges property + +This patch adds the gpio-ranges property to almost all of +the Qualcomm ARM platforms that utilize the pinctrl-msm +framework. + +The gpio-ranges property is part of the gpiolib subsystem. +As a result, the binding text is available in section +"2.1 gpio- and pin-controller interaction" of +Documentation/devicetree/bindings/gpio/gpio.txt + +For more information please see the patch titled: +"pinctrl: msm: fix gpio-hog related boot issues" from +this series. + +Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com> +Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019] +Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> +Reviewed-by: Linus Walleij <linus.walleij@linaro.org> +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019] +Cc: Luka Perkov <luka.perkov@sartura.hr> +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +Link: https://lore.kernel.org/r/20200108125455.308969-1-robert.marko@sartura.hr +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +--- + arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + + arch/arm/boot/dts/qcom-apq8084.dtsi | 1 + + arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + + arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 + + arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8660.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8960.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + + 8 files changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/qcom-apq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-apq8064.dtsi +@@ -350,6 +350,7 @@ + reg = <0x800000 0x4000>; + + gpio-controller; ++ gpio-ranges = <&tlmm_pinmux 0 0 90>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/arch/arm/boot/dts/qcom-apq8084.dtsi ++++ b/arch/arm/boot/dts/qcom-apq8084.dtsi +@@ -401,6 +401,7 @@ + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; ++ gpio-ranges = <&tlmm 0 0 147>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -201,6 +201,7 @@ + compatible = "qcom,ipq4019-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; ++ gpio-ranges = <&tlmm 0 0 100>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -119,6 +119,7 @@ + reg = <0x800000 0x4000>; + + gpio-controller; ++ gpio-ranges = <&qcom_pinmux 0 0 69>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi ++++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi +@@ -128,6 +128,7 @@ + msmgpio: pinctrl@800000 { + compatible = "qcom,mdm9615-pinctrl"; + gpio-controller; ++ gpio-ranges = <&msmgpio 0 0 88>; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; +--- a/arch/arm/boot/dts/qcom-msm8660.dtsi ++++ b/arch/arm/boot/dts/qcom-msm8660.dtsi +@@ -115,6 +115,7 @@ + reg = <0x800000 0x4000>; + + gpio-controller; ++ gpio-ranges = <&tlmm 0 0 173>; + #gpio-cells = <2>; + interrupts = <0 16 0x4>; + interrupt-controller; +--- a/arch/arm/boot/dts/qcom-msm8960.dtsi ++++ b/arch/arm/boot/dts/qcom-msm8960.dtsi +@@ -107,6 +107,7 @@ + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + gpio-controller; ++ gpio-ranges = <&msmgpio 0 0 152>; + #gpio-cells = <2>; + interrupts = <0 16 0x4>; + interrupt-controller; +--- a/arch/arm/boot/dts/qcom-msm8974.dtsi ++++ b/arch/arm/boot/dts/qcom-msm8974.dtsi +@@ -707,6 +707,7 @@ + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; ++ gpio-ranges = <&msmgpio 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; diff --git a/target/linux/ipq40xx/patches-5.10/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch b/target/linux/ipq40xx/patches-5.10/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch new file mode 100644 index 0000000000..f82021f4cd --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch @@ -0,0 +1,33 @@ +From 8acc36189dcaf4487d8c6ba7445948f39b1d248a Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu <absahu@codeaurora.org> +Date: Fri, 3 Apr 2020 13:40:40 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: fix high resolution timer + +Cherry-picked from CAF QSDK repo. +Original commit message: +The kernel is failing in switching the timer for high resolution +mode and clock source operates in 10ms resolution. The always-on +property needs to be given for timer device tree node to make +clock source working in 1ns resolution. + +Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> +Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +Tested-by: Robert Marko <robert.marko@sartura.hr> +Cc: Luka Perkov <luka.perkov@sartura.hr> +Link: https://lore.kernel.org/r/20200403114040.349787-1-robert.marko@sartura.hr +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -166,6 +166,7 @@ + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <48000000>; ++ always-on; + }; + + soc { diff --git a/target/linux/ipq40xx/patches-5.10/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch b/target/linux/ipq40xx/patches-5.10/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch new file mode 100644 index 0000000000..d678f761f5 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch @@ -0,0 +1,210 @@ +From 466ed24fb22342f3ae1c10758a6a0c6a8c081b2d Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Thu, 30 Apr 2020 11:07:05 +0200 +Subject: [PATCH] net: phy: mdio: add IPQ4019 MDIO driver + +This patch adds the driver for the MDIO interface +inside of Qualcomm IPQ40xx series SoC-s. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +Reviewed-by: Andrew Lunn <andrew@lunn.ch> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Cc: Luka Perkov <luka.perkov@sartura.hr> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/phy/Kconfig | 7 ++ + drivers/net/phy/Makefile | 1 + + drivers/net/phy/mdio-ipq4019.c | 160 +++++++++++++++++++++++++++++++++ + 3 files changed, 168 insertions(+) + create mode 100644 drivers/net/phy/mdio-ipq4019.c + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -156,6 +156,13 @@ config MDIO_I2C + + This is library mode. + ++config MDIO_IPQ4019 ++ tristate "Qualcomm IPQ4019 MDIO interface support" ++ depends on HAS_IOMEM && OF_MDIO ++ help ++ This driver supports the MDIO interface found in Qualcomm ++ IPQ40xx series Soc-s. ++ + config MDIO_MOXART + tristate "MOXA ART MDIO interface support" + depends on ARCH_MOXART || COMPILE_TEST +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -50,6 +50,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium + obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o + obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o + obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o ++obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o + obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o + obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o + obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o +--- /dev/null ++++ b/drivers/net/phy/mdio-ipq4019.c +@@ -0,0 +1,160 @@ ++// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause ++/* Copyright (c) 2015, The Linux Foundation. All rights reserved. */ ++/* Copyright (c) 2020 Sartura Ltd. */ ++ ++#include <linux/delay.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/io.h> ++#include <linux/iopoll.h> ++#include <linux/of_address.h> ++#include <linux/of_mdio.h> ++#include <linux/phy.h> ++#include <linux/platform_device.h> ++ ++#define MDIO_ADDR_REG 0x44 ++#define MDIO_DATA_WRITE_REG 0x48 ++#define MDIO_DATA_READ_REG 0x4c ++#define MDIO_CMD_REG 0x50 ++#define MDIO_CMD_ACCESS_BUSY BIT(16) ++#define MDIO_CMD_ACCESS_START BIT(8) ++#define MDIO_CMD_ACCESS_CODE_READ 0 ++#define MDIO_CMD_ACCESS_CODE_WRITE 1 ++ ++#define ipq4019_MDIO_TIMEOUT 10000 ++#define ipq4019_MDIO_SLEEP 10 ++ ++struct ipq4019_mdio_data { ++ void __iomem *membase; ++}; ++ ++static int ipq4019_mdio_wait_busy(struct mii_bus *bus) ++{ ++ struct ipq4019_mdio_data *priv = bus->priv; ++ unsigned int busy; ++ ++ return readl_poll_timeout(priv->membase + MDIO_CMD_REG, busy, ++ (busy & MDIO_CMD_ACCESS_BUSY) == 0, ++ ipq4019_MDIO_SLEEP, ipq4019_MDIO_TIMEOUT); ++} ++ ++static int ipq4019_mdio_read(struct mii_bus *bus, int mii_id, int regnum) ++{ ++ struct ipq4019_mdio_data *priv = bus->priv; ++ unsigned int cmd; ++ ++ /* Reject clause 45 */ ++ if (regnum & MII_ADDR_C45) ++ return -EOPNOTSUPP; ++ ++ if (ipq4019_mdio_wait_busy(bus)) ++ return -ETIMEDOUT; ++ ++ /* issue the phy address and reg */ ++ writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG); ++ ++ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ; ++ ++ /* issue read command */ ++ writel(cmd, priv->membase + MDIO_CMD_REG); ++ ++ /* Wait read complete */ ++ if (ipq4019_mdio_wait_busy(bus)) ++ return -ETIMEDOUT; ++ ++ /* Read and return data */ ++ return readl(priv->membase + MDIO_DATA_READ_REG); ++} ++ ++static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum, ++ u16 value) ++{ ++ struct ipq4019_mdio_data *priv = bus->priv; ++ unsigned int cmd; ++ ++ /* Reject clause 45 */ ++ if (regnum & MII_ADDR_C45) ++ return -EOPNOTSUPP; ++ ++ if (ipq4019_mdio_wait_busy(bus)) ++ return -ETIMEDOUT; ++ ++ /* issue the phy address and reg */ ++ writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG); ++ ++ /* issue write data */ ++ writel(value, priv->membase + MDIO_DATA_WRITE_REG); ++ ++ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE; ++ /* issue write command */ ++ writel(cmd, priv->membase + MDIO_CMD_REG); ++ ++ /* Wait write complete */ ++ if (ipq4019_mdio_wait_busy(bus)) ++ return -ETIMEDOUT; ++ ++ return 0; ++} ++ ++static int ipq4019_mdio_probe(struct platform_device *pdev) ++{ ++ struct ipq4019_mdio_data *priv; ++ struct mii_bus *bus; ++ int ret; ++ ++ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv)); ++ if (!bus) ++ return -ENOMEM; ++ ++ priv = bus->priv; ++ ++ priv->membase = devm_platform_ioremap_resource(pdev, 0); ++ if (IS_ERR(priv->membase)) ++ return PTR_ERR(priv->membase); ++ ++ bus->name = "ipq4019_mdio"; ++ bus->read = ipq4019_mdio_read; ++ bus->write = ipq4019_mdio_write; ++ bus->parent = &pdev->dev; ++ snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id); ++ ++ ret = of_mdiobus_register(bus, pdev->dev.of_node); ++ if (ret) { ++ dev_err(&pdev->dev, "Cannot register MDIO bus!\n"); ++ return ret; ++ } ++ ++ platform_set_drvdata(pdev, bus); ++ ++ return 0; ++} ++ ++static int ipq4019_mdio_remove(struct platform_device *pdev) ++{ ++ struct mii_bus *bus = platform_get_drvdata(pdev); ++ ++ mdiobus_unregister(bus); ++ ++ return 0; ++} ++ ++static const struct of_device_id ipq4019_mdio_dt_ids[] = { ++ { .compatible = "qcom,ipq4019-mdio" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids); ++ ++static struct platform_driver ipq4019_mdio_driver = { ++ .probe = ipq4019_mdio_probe, ++ .remove = ipq4019_mdio_remove, ++ .driver = { ++ .name = "ipq4019-mdio", ++ .of_match_table = ipq4019_mdio_dt_ids, ++ }, ++}; ++ ++module_platform_driver(ipq4019_mdio_driver); ++ ++MODULE_DESCRIPTION("ipq4019 MDIO interface driver"); ++MODULE_AUTHOR("Qualcomm Atheros"); ++MODULE_LICENSE("Dual BSD/GPL"); diff --git a/target/linux/ipq40xx/patches-5.10/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch b/target/linux/ipq40xx/patches-5.10/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch new file mode 100644 index 0000000000..1976686e8f --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch @@ -0,0 +1,57 @@ +From 9c8c0f70ec6fdac2398632c723c48277be09b7c0 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Thu, 30 Apr 2020 11:07:07 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: add MDIO node + +This patch adds the necessary MDIO interface node +to the Qualcomm IPQ4019 DTSI. + +Built-in QCA8337N switch is managed using it, +and since we have a driver for it lets add it. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +Reviewed-by: Andrew Lunn <andrew@lunn.ch> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Cc: Luka Perkov <luka.perkov@sartura.hr> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -577,5 +577,33 @@ + "legacy"; + status = "disabled"; + }; ++ ++ mdio: mdio@90000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "qcom,ipq4019-mdio"; ++ reg = <0x90000 0x64>; ++ status = "disabled"; ++ ++ ethphy0: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ ethphy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ ethphy2: ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ ethphy3: ethernet-phy@3 { ++ reg = <3>; ++ }; ++ ++ ethphy4: ethernet-phy@4 { ++ reg = <4>; ++ }; ++ }; + }; + }; diff --git a/target/linux/ipq40xx/patches-5.10/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch b/target/linux/ipq40xx/patches-5.10/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch new file mode 100644 index 0000000000..415d6fff99 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch @@ -0,0 +1,31 @@ +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag + +Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by +the qce driver, since they are all hardware accelerated, accessible +through a kernel driver only, and not available directly to userspace. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> + +--- a/drivers/crypto/qce/ablkcipher.c ++++ b/drivers/crypto/qce/ablkcipher.c +@@ -380,7 +380,7 @@ static int qce_ablkcipher_register_one(c + + alg->cra_priority = 300; + alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | +- CRYPTO_ALG_NEED_FALLBACK; ++ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; + alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); + alg->cra_alignmask = 0; + alg->cra_type = &crypto_ablkcipher_type; +--- a/drivers/crypto/qce/sha.c ++++ b/drivers/crypto/qce/sha.c +@@ -495,7 +495,7 @@ static int qce_ahash_register_one(const + base = &alg->halg.base; + base->cra_blocksize = def->blocksize; + base->cra_priority = 300; +- base->cra_flags = CRYPTO_ALG_ASYNC; ++ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY; + base->cra_ctxsize = sizeof(struct qce_sha_ctx); + base->cra_alignmask = 0; + base->cra_module = THIS_MODULE; diff --git a/target/linux/ipq40xx/patches-5.10/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch b/target/linux/ipq40xx/patches-5.10/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch new file mode 100644 index 0000000000..4dcb942150 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch @@ -0,0 +1,993 @@ +From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001 +From: Ard Biesheuvel <ardb@kernel.org> +Date: Tue, 5 Nov 2019 14:28:17 +0100 +Subject: [PATCH] crypto: qce - switch to skcipher API + +Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface") +dated 20 august 2015 introduced the new skcipher API which is supposed to +replace both blkcipher and ablkcipher. While all consumers of the API have +been converted long ago, some producers of the ablkcipher remain, forcing +us to keep the ablkcipher support routines alive, along with the matching +code to expose [a]blkciphers via the skcipher API. + +So switch this driver to the skcipher API, allowing us to finally drop the +blkcipher code in the near future. + +Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> +Signed-off-by: Ard Biesheuvel <ardb@kernel.org> +Backported-to-4.19-by: Eneas U de Queiroz <cotequeiroz@gmail.com> + +--- a/drivers/crypto/qce/Makefile ++++ b/drivers/crypto/qce/Makefile +@@ -4,4 +4,4 @@ qcrypto-objs := core.o \ + common.o \ + dma.o \ + sha.o \ +- ablkcipher.o ++ skcipher.o +--- a/drivers/crypto/qce/cipher.h ++++ b/drivers/crypto/qce/cipher.h +@@ -45,12 +45,12 @@ struct qce_cipher_reqctx { + unsigned int cryptlen; + }; + +-static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm) ++static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm) + { +- struct crypto_alg *alg = tfm->__crt_alg; +- return container_of(alg, struct qce_alg_template, alg.crypto); ++ struct skcipher_alg *alg = crypto_skcipher_alg(tfm); ++ return container_of(alg, struct qce_alg_template, alg.skcipher); + } + +-extern const struct qce_algo_ops ablkcipher_ops; ++extern const struct qce_algo_ops skcipher_ops; + + #endif /* _CIPHER_H_ */ +--- a/drivers/crypto/qce/common.c ++++ b/drivers/crypto/qce/common.c +@@ -304,13 +304,13 @@ go_proc: + return 0; + } + +-static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req, ++static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, + u32 totallen, u32 offset) + { +- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); +- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); ++ struct skcipher_request *req = skcipher_request_cast(async_req); ++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); + struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm); +- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); ++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); + struct qce_device *qce = tmpl->qce; + __be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0}; + __be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0}; +@@ -389,8 +389,8 @@ int qce_start(struct crypto_async_reques + u32 offset) + { + switch (type) { +- case CRYPTO_ALG_TYPE_ABLKCIPHER: +- return qce_setup_regs_ablkcipher(async_req, totallen, offset); ++ case CRYPTO_ALG_TYPE_SKCIPHER: ++ return qce_setup_regs_skcipher(async_req, totallen, offset); + case CRYPTO_ALG_TYPE_AHASH: + return qce_setup_regs_ahash(async_req, totallen, offset); + default: +--- a/drivers/crypto/qce/common.h ++++ b/drivers/crypto/qce/common.h +@@ -10,6 +10,7 @@ + #include <linux/types.h> + #include <crypto/aes.h> + #include <crypto/hash.h> ++#include <crypto/internal/skcipher.h> + + /* key size in bytes */ + #define QCE_SHA_HMAC_KEY_SIZE 64 +@@ -79,7 +80,7 @@ struct qce_alg_template { + unsigned long alg_flags; + const u32 *std_iv; + union { +- struct crypto_alg crypto; ++ struct skcipher_alg skcipher; + struct ahash_alg ahash; + } alg; + struct qce_device *qce; +--- a/drivers/crypto/qce/core.c ++++ b/drivers/crypto/qce/core.c +@@ -22,7 +22,7 @@ + #define QCE_QUEUE_LENGTH 1 + + static const struct qce_algo_ops *qce_ops[] = { +- &ablkcipher_ops, ++ &skcipher_ops, + &ahash_ops, + }; + +--- a/drivers/crypto/qce/ablkcipher.c ++++ /dev/null +@@ -1,440 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-only +-/* +- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. +- */ +- +-#include <linux/device.h> +-#include <linux/interrupt.h> +-#include <linux/types.h> +-#include <crypto/aes.h> +-#include <crypto/internal/des.h> +-#include <crypto/internal/skcipher.h> +- +-#include "cipher.h" +- +-static LIST_HEAD(ablkcipher_algs); +- +-static void qce_ablkcipher_done(void *data) +-{ +- struct crypto_async_request *async_req = data; +- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); +- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); +- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); +- struct qce_device *qce = tmpl->qce; +- enum dma_data_direction dir_src, dir_dst; +- u32 status; +- int error; +- bool diff_dst; +- +- diff_dst = (req->src != req->dst) ? true : false; +- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; +- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; +- +- error = qce_dma_terminate_all(&qce->dma); +- if (error) +- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n", +- error); +- +- if (diff_dst) +- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); +- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); +- +- sg_free_table(&rctx->dst_tbl); +- +- error = qce_check_status(qce, &status); +- if (error < 0) +- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status); +- +- qce->async_req_done(tmpl->qce, error); +-} +- +-static int +-qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req) +-{ +- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); +- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); +- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req); +- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); +- struct qce_device *qce = tmpl->qce; +- enum dma_data_direction dir_src, dir_dst; +- struct scatterlist *sg; +- bool diff_dst; +- gfp_t gfp; +- int ret; +- +- rctx->iv = req->info; +- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher); +- rctx->cryptlen = req->nbytes; +- +- diff_dst = (req->src != req->dst) ? true : false; +- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; +- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; +- +- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes); +- if (diff_dst) +- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes); +- else +- rctx->dst_nents = rctx->src_nents; +- if (rctx->src_nents < 0) { +- dev_err(qce->dev, "Invalid numbers of src SG.\n"); +- return rctx->src_nents; +- } +- if (rctx->dst_nents < 0) { +- dev_err(qce->dev, "Invalid numbers of dst SG.\n"); +- return -rctx->dst_nents; +- } +- +- rctx->dst_nents += 1; +- +- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? +- GFP_KERNEL : GFP_ATOMIC; +- +- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); +- if (ret) +- return ret; +- +- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); +- +- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); +- if (IS_ERR(sg)) { +- ret = PTR_ERR(sg); +- goto error_free; +- } +- +- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); +- if (IS_ERR(sg)) { +- ret = PTR_ERR(sg); +- goto error_free; +- } +- +- sg_mark_end(sg); +- rctx->dst_sg = rctx->dst_tbl.sgl; +- +- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); +- if (ret < 0) +- goto error_free; +- +- if (diff_dst) { +- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); +- if (ret < 0) +- goto error_unmap_dst; +- rctx->src_sg = req->src; +- } else { +- rctx->src_sg = rctx->dst_sg; +- } +- +- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, +- rctx->dst_sg, rctx->dst_nents, +- qce_ablkcipher_done, async_req); +- if (ret) +- goto error_unmap_src; +- +- qce_dma_issue_pending(&qce->dma); +- +- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0); +- if (ret) +- goto error_terminate; +- +- return 0; +- +-error_terminate: +- qce_dma_terminate_all(&qce->dma); +-error_unmap_src: +- if (diff_dst) +- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); +-error_unmap_dst: +- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); +-error_free: +- sg_free_table(&rctx->dst_tbl); +- return ret; +-} +- +-static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key, +- unsigned int keylen) +-{ +- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk); +- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); +- int ret; +- +- if (!key || !keylen) +- return -EINVAL; +- +- switch (keylen) { +- case AES_KEYSIZE_128: +- case AES_KEYSIZE_256: +- break; +- default: +- goto fallback; +- } +- +- ctx->enc_keylen = keylen; +- memcpy(ctx->enc_key, key, keylen); +- return 0; +-fallback: +- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); +- if (!ret) +- ctx->enc_keylen = keylen; +- return ret; +-} +- +-static int qce_des_setkey(struct crypto_ablkcipher *ablk, const u8 *key, +- unsigned int keylen) +-{ +- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk); +- int err; +- +- err = verify_ablkcipher_des_key(ablk, key); +- if (err) +- return err; +- +- ctx->enc_keylen = keylen; +- memcpy(ctx->enc_key, key, keylen); +- return 0; +-} +- +-static int qce_des3_setkey(struct crypto_ablkcipher *ablk, const u8 *key, +- unsigned int keylen) +-{ +- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk); +- int err; +- +- err = verify_ablkcipher_des3_key(ablk, key); +- if (err) +- return err; +- +- ctx->enc_keylen = keylen; +- memcpy(ctx->enc_key, key, keylen); +- return 0; +-} +- +-static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt) +-{ +- struct crypto_tfm *tfm = +- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req)); +- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); +- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); +- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); +- int ret; +- +- rctx->flags = tmpl->alg_flags; +- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; +- +- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && +- ctx->enc_keylen != AES_KEYSIZE_256) { +- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); +- +- skcipher_request_set_sync_tfm(subreq, ctx->fallback); +- skcipher_request_set_callback(subreq, req->base.flags, +- NULL, NULL); +- skcipher_request_set_crypt(subreq, req->src, req->dst, +- req->nbytes, req->info); +- ret = encrypt ? crypto_skcipher_encrypt(subreq) : +- crypto_skcipher_decrypt(subreq); +- skcipher_request_zero(subreq); +- return ret; +- } +- +- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); +-} +- +-static int qce_ablkcipher_encrypt(struct ablkcipher_request *req) +-{ +- return qce_ablkcipher_crypt(req, 1); +-} +- +-static int qce_ablkcipher_decrypt(struct ablkcipher_request *req) +-{ +- return qce_ablkcipher_crypt(req, 0); +-} +- +-static int qce_ablkcipher_init(struct crypto_tfm *tfm) +-{ +- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); +- +- memset(ctx, 0, sizeof(*ctx)); +- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx); +- +- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(tfm), +- 0, CRYPTO_ALG_NEED_FALLBACK); +- return PTR_ERR_OR_ZERO(ctx->fallback); +-} +- +-static void qce_ablkcipher_exit(struct crypto_tfm *tfm) +-{ +- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); +- +- crypto_free_sync_skcipher(ctx->fallback); +-} +- +-struct qce_ablkcipher_def { +- unsigned long flags; +- const char *name; +- const char *drv_name; +- unsigned int blocksize; +- unsigned int ivsize; +- unsigned int min_keysize; +- unsigned int max_keysize; +-}; +- +-static const struct qce_ablkcipher_def ablkcipher_def[] = { +- { +- .flags = QCE_ALG_AES | QCE_MODE_ECB, +- .name = "ecb(aes)", +- .drv_name = "ecb-aes-qce", +- .blocksize = AES_BLOCK_SIZE, +- .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_AES | QCE_MODE_CBC, +- .name = "cbc(aes)", +- .drv_name = "cbc-aes-qce", +- .blocksize = AES_BLOCK_SIZE, +- .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_AES | QCE_MODE_CTR, +- .name = "ctr(aes)", +- .drv_name = "ctr-aes-qce", +- .blocksize = AES_BLOCK_SIZE, +- .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_AES | QCE_MODE_XTS, +- .name = "xts(aes)", +- .drv_name = "xts-aes-qce", +- .blocksize = AES_BLOCK_SIZE, +- .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_DES | QCE_MODE_ECB, +- .name = "ecb(des)", +- .drv_name = "ecb-des-qce", +- .blocksize = DES_BLOCK_SIZE, +- .ivsize = 0, +- .min_keysize = DES_KEY_SIZE, +- .max_keysize = DES_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_DES | QCE_MODE_CBC, +- .name = "cbc(des)", +- .drv_name = "cbc-des-qce", +- .blocksize = DES_BLOCK_SIZE, +- .ivsize = DES_BLOCK_SIZE, +- .min_keysize = DES_KEY_SIZE, +- .max_keysize = DES_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_3DES | QCE_MODE_ECB, +- .name = "ecb(des3_ede)", +- .drv_name = "ecb-3des-qce", +- .blocksize = DES3_EDE_BLOCK_SIZE, +- .ivsize = 0, +- .min_keysize = DES3_EDE_KEY_SIZE, +- .max_keysize = DES3_EDE_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_3DES | QCE_MODE_CBC, +- .name = "cbc(des3_ede)", +- .drv_name = "cbc-3des-qce", +- .blocksize = DES3_EDE_BLOCK_SIZE, +- .ivsize = DES3_EDE_BLOCK_SIZE, +- .min_keysize = DES3_EDE_KEY_SIZE, +- .max_keysize = DES3_EDE_KEY_SIZE, +- }, +-}; +- +-static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def, +- struct qce_device *qce) +-{ +- struct qce_alg_template *tmpl; +- struct crypto_alg *alg; +- int ret; +- +- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); +- if (!tmpl) +- return -ENOMEM; +- +- alg = &tmpl->alg.crypto; +- +- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); +- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", +- def->drv_name); +- +- alg->cra_blocksize = def->blocksize; +- alg->cra_ablkcipher.ivsize = def->ivsize; +- alg->cra_ablkcipher.min_keysize = def->min_keysize; +- alg->cra_ablkcipher.max_keysize = def->max_keysize; +- alg->cra_ablkcipher.setkey = IS_3DES(def->flags) ? qce_des3_setkey : +- IS_DES(def->flags) ? qce_des_setkey : +- qce_ablkcipher_setkey; +- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt; +- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt; +- +- alg->cra_priority = 300; +- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | +- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; +- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); +- alg->cra_alignmask = 0; +- alg->cra_type = &crypto_ablkcipher_type; +- alg->cra_module = THIS_MODULE; +- alg->cra_init = qce_ablkcipher_init; +- alg->cra_exit = qce_ablkcipher_exit; +- +- INIT_LIST_HEAD(&tmpl->entry); +- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER; +- tmpl->alg_flags = def->flags; +- tmpl->qce = qce; +- +- ret = crypto_register_alg(alg); +- if (ret) { +- kfree(tmpl); +- dev_err(qce->dev, "%s registration failed\n", alg->cra_name); +- return ret; +- } +- +- list_add_tail(&tmpl->entry, &ablkcipher_algs); +- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name); +- return 0; +-} +- +-static void qce_ablkcipher_unregister(struct qce_device *qce) +-{ +- struct qce_alg_template *tmpl, *n; +- +- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) { +- crypto_unregister_alg(&tmpl->alg.crypto); +- list_del(&tmpl->entry); +- kfree(tmpl); +- } +-} +- +-static int qce_ablkcipher_register(struct qce_device *qce) +-{ +- int ret, i; +- +- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) { +- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce); +- if (ret) +- goto err; +- } +- +- return 0; +-err: +- qce_ablkcipher_unregister(qce); +- return ret; +-} +- +-const struct qce_algo_ops ablkcipher_ops = { +- .type = CRYPTO_ALG_TYPE_ABLKCIPHER, +- .register_algs = qce_ablkcipher_register, +- .unregister_algs = qce_ablkcipher_unregister, +- .async_req_handle = qce_ablkcipher_async_req_handle, +-}; +--- /dev/null ++++ b/drivers/crypto/qce/skcipher.c +@@ -0,0 +1,440 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. ++ */ ++ ++#include <linux/device.h> ++#include <linux/interrupt.h> ++#include <linux/types.h> ++#include <crypto/aes.h> ++#include <crypto/internal/des.h> ++#include <crypto/internal/skcipher.h> ++ ++#include "cipher.h" ++ ++static LIST_HEAD(skcipher_algs); ++ ++static void qce_skcipher_done(void *data) ++{ ++ struct crypto_async_request *async_req = data; ++ struct skcipher_request *req = skcipher_request_cast(async_req); ++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); ++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); ++ struct qce_device *qce = tmpl->qce; ++ enum dma_data_direction dir_src, dir_dst; ++ u32 status; ++ int error; ++ bool diff_dst; ++ ++ diff_dst = (req->src != req->dst) ? true : false; ++ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; ++ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; ++ ++ error = qce_dma_terminate_all(&qce->dma); ++ if (error) ++ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n", ++ error); ++ ++ if (diff_dst) ++ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); ++ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); ++ ++ sg_free_table(&rctx->dst_tbl); ++ ++ error = qce_check_status(qce, &status); ++ if (error < 0) ++ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); ++ ++ qce->async_req_done(tmpl->qce, error); ++} ++ ++static int ++qce_skcipher_async_req_handle(struct crypto_async_request *async_req) ++{ ++ struct skcipher_request *req = skcipher_request_cast(async_req); ++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); ++ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req); ++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); ++ struct qce_device *qce = tmpl->qce; ++ enum dma_data_direction dir_src, dir_dst; ++ struct scatterlist *sg; ++ bool diff_dst; ++ gfp_t gfp; ++ int ret; ++ ++ rctx->iv = req->iv; ++ rctx->ivsize = crypto_skcipher_ivsize(skcipher); ++ rctx->cryptlen = req->cryptlen; ++ ++ diff_dst = (req->src != req->dst) ? true : false; ++ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; ++ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; ++ ++ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen); ++ if (diff_dst) ++ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen); ++ else ++ rctx->dst_nents = rctx->src_nents; ++ if (rctx->src_nents < 0) { ++ dev_err(qce->dev, "Invalid numbers of src SG.\n"); ++ return rctx->src_nents; ++ } ++ if (rctx->dst_nents < 0) { ++ dev_err(qce->dev, "Invalid numbers of dst SG.\n"); ++ return -rctx->dst_nents; ++ } ++ ++ rctx->dst_nents += 1; ++ ++ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? ++ GFP_KERNEL : GFP_ATOMIC; ++ ++ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); ++ if (ret) ++ return ret; ++ ++ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); ++ ++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); ++ if (IS_ERR(sg)) { ++ ret = PTR_ERR(sg); ++ goto error_free; ++ } ++ ++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); ++ if (IS_ERR(sg)) { ++ ret = PTR_ERR(sg); ++ goto error_free; ++ } ++ ++ sg_mark_end(sg); ++ rctx->dst_sg = rctx->dst_tbl.sgl; ++ ++ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); ++ if (ret < 0) ++ goto error_free; ++ ++ if (diff_dst) { ++ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); ++ if (ret < 0) ++ goto error_unmap_dst; ++ rctx->src_sg = req->src; ++ } else { ++ rctx->src_sg = rctx->dst_sg; ++ } ++ ++ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, ++ rctx->dst_sg, rctx->dst_nents, ++ qce_skcipher_done, async_req); ++ if (ret) ++ goto error_unmap_src; ++ ++ qce_dma_issue_pending(&qce->dma); ++ ++ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0); ++ if (ret) ++ goto error_terminate; ++ ++ return 0; ++ ++error_terminate: ++ qce_dma_terminate_all(&qce->dma); ++error_unmap_src: ++ if (diff_dst) ++ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); ++error_unmap_dst: ++ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); ++error_free: ++ sg_free_table(&rctx->dst_tbl); ++ return ret; ++} ++ ++static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key, ++ unsigned int keylen) ++{ ++ struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk); ++ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); ++ int ret; ++ ++ if (!key || !keylen) ++ return -EINVAL; ++ ++ switch (keylen) { ++ case AES_KEYSIZE_128: ++ case AES_KEYSIZE_256: ++ break; ++ default: ++ goto fallback; ++ } ++ ++ ctx->enc_keylen = keylen; ++ memcpy(ctx->enc_key, key, keylen); ++ return 0; ++fallback: ++ ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); ++ if (!ret) ++ ctx->enc_keylen = keylen; ++ return ret; ++} ++ ++static int qce_des_setkey(struct crypto_skcipher *ablk, const u8 *key, ++ unsigned int keylen) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); ++ int err; ++ ++ err = verify_skcipher_des_key(ablk, key); ++ if (err) ++ return err; ++ ++ ctx->enc_keylen = keylen; ++ memcpy(ctx->enc_key, key, keylen); ++ return 0; ++} ++ ++static int qce_des3_setkey(struct crypto_skcipher *ablk, const u8 *key, ++ unsigned int keylen) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); ++ int err; ++ ++ err = verify_skcipher_des3_key(ablk, key); ++ if (err) ++ return err; ++ ++ ctx->enc_keylen = keylen; ++ memcpy(ctx->enc_key, key, keylen); ++ return 0; ++} ++ ++static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt) ++{ ++ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); ++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); ++ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); ++ int ret; ++ ++ rctx->flags = tmpl->alg_flags; ++ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; ++ ++ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && ++ ctx->enc_keylen != AES_KEYSIZE_256) { ++ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); ++ ++ skcipher_request_set_sync_tfm(subreq, ctx->fallback); ++ skcipher_request_set_callback(subreq, req->base.flags, ++ NULL, NULL); ++ skcipher_request_set_crypt(subreq, req->src, req->dst, ++ req->cryptlen, req->iv); ++ ret = encrypt ? crypto_skcipher_encrypt(subreq) : ++ crypto_skcipher_decrypt(subreq); ++ skcipher_request_zero(subreq); ++ return ret; ++ } ++ ++ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); ++} ++ ++static int qce_skcipher_encrypt(struct skcipher_request *req) ++{ ++ return qce_skcipher_crypt(req, 1); ++} ++ ++static int qce_skcipher_decrypt(struct skcipher_request *req) ++{ ++ return qce_skcipher_crypt(req, 0); ++} ++ ++static int qce_skcipher_init(struct crypto_skcipher *tfm) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); ++ ++ memset(ctx, 0, sizeof(*ctx)); ++ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); ++ ++ ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base), ++ 0, CRYPTO_ALG_NEED_FALLBACK); ++ return PTR_ERR_OR_ZERO(ctx->fallback); ++} ++ ++static void qce_skcipher_exit(struct crypto_skcipher *tfm) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); ++ ++ crypto_free_sync_skcipher(ctx->fallback); ++} ++ ++struct qce_skcipher_def { ++ unsigned long flags; ++ const char *name; ++ const char *drv_name; ++ unsigned int blocksize; ++ unsigned int ivsize; ++ unsigned int min_keysize; ++ unsigned int max_keysize; ++}; ++ ++static const struct qce_skcipher_def skcipher_def[] = { ++ { ++ .flags = QCE_ALG_AES | QCE_MODE_ECB, ++ .name = "ecb(aes)", ++ .drv_name = "ecb-aes-qce", ++ .blocksize = AES_BLOCK_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_AES | QCE_MODE_CBC, ++ .name = "cbc(aes)", ++ .drv_name = "cbc-aes-qce", ++ .blocksize = AES_BLOCK_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_AES | QCE_MODE_CTR, ++ .name = "ctr(aes)", ++ .drv_name = "ctr-aes-qce", ++ .blocksize = AES_BLOCK_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_AES | QCE_MODE_XTS, ++ .name = "xts(aes)", ++ .drv_name = "xts-aes-qce", ++ .blocksize = AES_BLOCK_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_DES | QCE_MODE_ECB, ++ .name = "ecb(des)", ++ .drv_name = "ecb-des-qce", ++ .blocksize = DES_BLOCK_SIZE, ++ .ivsize = 0, ++ .min_keysize = DES_KEY_SIZE, ++ .max_keysize = DES_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_DES | QCE_MODE_CBC, ++ .name = "cbc(des)", ++ .drv_name = "cbc-des-qce", ++ .blocksize = DES_BLOCK_SIZE, ++ .ivsize = DES_BLOCK_SIZE, ++ .min_keysize = DES_KEY_SIZE, ++ .max_keysize = DES_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_3DES | QCE_MODE_ECB, ++ .name = "ecb(des3_ede)", ++ .drv_name = "ecb-3des-qce", ++ .blocksize = DES3_EDE_BLOCK_SIZE, ++ .ivsize = 0, ++ .min_keysize = DES3_EDE_KEY_SIZE, ++ .max_keysize = DES3_EDE_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_3DES | QCE_MODE_CBC, ++ .name = "cbc(des3_ede)", ++ .drv_name = "cbc-3des-qce", ++ .blocksize = DES3_EDE_BLOCK_SIZE, ++ .ivsize = DES3_EDE_BLOCK_SIZE, ++ .min_keysize = DES3_EDE_KEY_SIZE, ++ .max_keysize = DES3_EDE_KEY_SIZE, ++ }, ++}; ++ ++static int qce_skcipher_register_one(const struct qce_skcipher_def *def, ++ struct qce_device *qce) ++{ ++ struct qce_alg_template *tmpl; ++ struct skcipher_alg *alg; ++ int ret; ++ ++ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); ++ if (!tmpl) ++ return -ENOMEM; ++ ++ alg = &tmpl->alg.skcipher; ++ ++ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); ++ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", ++ def->drv_name); ++ ++ alg->base.cra_blocksize = def->blocksize; ++ alg->ivsize = def->ivsize; ++ alg->min_keysize = def->min_keysize; ++ alg->max_keysize = def->max_keysize; ++ alg->setkey = IS_3DES(def->flags) ? qce_des3_setkey : ++ IS_DES(def->flags) ? qce_des_setkey : ++ qce_skcipher_setkey; ++ alg->encrypt = qce_skcipher_encrypt; ++ alg->decrypt = qce_skcipher_decrypt; ++ ++ alg->base.cra_priority = 300; ++ alg->base.cra_flags = CRYPTO_ALG_ASYNC | ++ CRYPTO_ALG_NEED_FALLBACK | ++ CRYPTO_ALG_KERN_DRIVER_ONLY; ++ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); ++ alg->base.cra_alignmask = 0; ++ alg->base.cra_module = THIS_MODULE; ++ ++ alg->init = qce_skcipher_init; ++ alg->exit = qce_skcipher_exit; ++ ++ INIT_LIST_HEAD(&tmpl->entry); ++ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; ++ tmpl->alg_flags = def->flags; ++ tmpl->qce = qce; ++ ++ ret = crypto_register_skcipher(alg); ++ if (ret) { ++ kfree(tmpl); ++ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name); ++ return ret; ++ } ++ ++ list_add_tail(&tmpl->entry, &skcipher_algs); ++ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name); ++ return 0; ++} ++ ++static void qce_skcipher_unregister(struct qce_device *qce) ++{ ++ struct qce_alg_template *tmpl, *n; ++ ++ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) { ++ crypto_unregister_skcipher(&tmpl->alg.skcipher); ++ list_del(&tmpl->entry); ++ kfree(tmpl); ++ } ++} ++ ++static int qce_skcipher_register(struct qce_device *qce) ++{ ++ int ret, i; ++ ++ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) { ++ ret = qce_skcipher_register_one(&skcipher_def[i], qce); ++ if (ret) ++ goto err; ++ } ++ ++ return 0; ++err: ++ qce_skcipher_unregister(qce); ++ return ret; ++} ++ ++const struct qce_algo_ops skcipher_ops = { ++ .type = CRYPTO_ALG_TYPE_SKCIPHER, ++ .register_algs = qce_skcipher_register, ++ .unregister_algs = qce_skcipher_unregister, ++ .async_req_handle = qce_skcipher_async_req_handle, ++}; diff --git a/target/linux/ipq40xx/patches-5.10/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch b/target/linux/ipq40xx/patches-5.10/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch new file mode 100644 index 0000000000..ac4f163f4a --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch @@ -0,0 +1,43 @@ +From bb5c863b3d3cbd10e80b2ebf409934a091058f54 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 20 Dec 2019 16:02:13 -0300 +Subject: [PATCH 02/11] crypto: qce - fix ctr-aes-qce block, chunk sizes + +Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher, +adding the definition for chucksize instead, where the underlying block +size belongs. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + drivers/crypto/qce/skcipher.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -270,6 +270,7 @@ struct qce_skcipher_def { + const char *name; + const char *drv_name; + unsigned int blocksize; ++ unsigned int chunksize; + unsigned int ivsize; + unsigned int min_keysize; + unsigned int max_keysize; +@@ -298,7 +299,8 @@ static const struct qce_skcipher_def skc + .flags = QCE_ALG_AES | QCE_MODE_CTR, + .name = "ctr(aes)", + .drv_name = "ctr-aes-qce", +- .blocksize = AES_BLOCK_SIZE, ++ .blocksize = 1, ++ .chunksize = AES_BLOCK_SIZE, + .ivsize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, +@@ -368,6 +370,7 @@ static int qce_skcipher_register_one(con + def->drv_name); + + alg->base.cra_blocksize = def->blocksize; ++ alg->chunksize = def->chunksize; + alg->ivsize = def->ivsize; + alg->min_keysize = def->min_keysize; + alg->max_keysize = def->max_keysize; diff --git a/target/linux/ipq40xx/patches-5.10/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch b/target/linux/ipq40xx/patches-5.10/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch new file mode 100644 index 0000000000..4dcf1ac726 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch @@ -0,0 +1,60 @@ +From 7de4c2bd196f111e39cc60f6197654aff23ba2b4 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 20 Dec 2019 16:02:14 -0300 +Subject: [PATCH 03/11] crypto: qce - fix xts-aes-qce key sizes + +XTS-mode uses two keys, so the keysizes should be doubled in +skcipher_def, and halved when checking if it is AES-128/192/256. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + drivers/crypto/qce/skcipher.c | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -154,12 +154,13 @@ static int qce_skcipher_setkey(struct cr + { + struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk); + struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); ++ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags; + int ret; + + if (!key || !keylen) + return -EINVAL; + +- switch (keylen) { ++ switch (IS_XTS(flags) ? keylen >> 1 : keylen) { + case AES_KEYSIZE_128: + case AES_KEYSIZE_256: + break; +@@ -213,13 +214,15 @@ static int qce_skcipher_crypt(struct skc + struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); + struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); + struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); ++ int keylen; + int ret; + + rctx->flags = tmpl->alg_flags; + rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; ++ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; + +- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && +- ctx->enc_keylen != AES_KEYSIZE_256) { ++ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && ++ keylen != AES_KEYSIZE_256) { + SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); + + skcipher_request_set_sync_tfm(subreq, ctx->fallback); +@@ -311,8 +314,8 @@ static const struct qce_skcipher_def skc + .drv_name = "xts-aes-qce", + .blocksize = AES_BLOCK_SIZE, + .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE * 2, ++ .max_keysize = AES_MAX_KEY_SIZE * 2, + }, + { + .flags = QCE_ALG_DES | QCE_MODE_ECB, diff --git a/target/linux/ipq40xx/patches-5.10/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch b/target/linux/ipq40xx/patches-5.10/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch new file mode 100644 index 0000000000..2385d483f2 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch @@ -0,0 +1,85 @@ +From 3ee50c896d712dc2fc8f34c2cd1918d035e74045 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 20 Dec 2019 16:02:15 -0300 +Subject: [PATCH 04/11] crypto: qce - save a sg table slot for result buf + +When ctr-aes-qce is used for gcm-mode, an extra sg entry for the +authentication tag is present, causing trouble when the qce driver +prepares the dst-results sg table for dma. + +It computes the number of entries needed with sg_nents_for_len, leaving +out the tag entry. Then it creates a sg table with that number plus +one, used to store a result buffer. + +When copying the sg table, there's no limit to the number of entries +copied, so the extra slot is filled with the authentication tag sg. +When the driver tries to add the result sg, the list is full, and it +returns EINVAL. + +By limiting the number of sg entries copied to the dest table, the slot +for the result buffer is guaranteed to be unused. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + drivers/crypto/qce/dma.c | 6 ++++-- + drivers/crypto/qce/dma.h | 3 ++- + drivers/crypto/qce/skcipher.c | 4 ++-- + 3 files changed, 8 insertions(+), 5 deletions(-) + +--- a/drivers/crypto/qce/dma.c ++++ b/drivers/crypto/qce/dma.c +@@ -47,7 +47,8 @@ void qce_dma_release(struct qce_dma_data + } + + struct scatterlist * +-qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl) ++qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, ++ int max_ents) + { + struct scatterlist *sg = sgt->sgl, *sg_last = NULL; + +@@ -60,12 +61,13 @@ qce_sgtable_add(struct sg_table *sgt, st + if (!sg) + return ERR_PTR(-EINVAL); + +- while (new_sgl && sg) { ++ while (new_sgl && sg && max_ents) { + sg_set_page(sg, sg_page(new_sgl), new_sgl->length, + new_sgl->offset); + sg_last = sg; + sg = sg_next(sg); + new_sgl = sg_next(new_sgl); ++ max_ents--; + } + + return sg_last; +--- a/drivers/crypto/qce/dma.h ++++ b/drivers/crypto/qce/dma.h +@@ -42,6 +42,7 @@ int qce_dma_prep_sgs(struct qce_dma_data + void qce_dma_issue_pending(struct qce_dma_data *dma); + int qce_dma_terminate_all(struct qce_dma_data *dma); + struct scatterlist * +-qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add); ++qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, ++ int max_ents); + + #endif /* _DMA_H_ */ +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -95,13 +95,13 @@ qce_skcipher_async_req_handle(struct cry + + sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); + +- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); ++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); + if (IS_ERR(sg)) { + ret = PTR_ERR(sg); + goto error_free; + } + +- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); ++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); + if (IS_ERR(sg)) { + ret = PTR_ERR(sg); + goto error_free; diff --git a/target/linux/ipq40xx/patches-5.10/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch b/target/linux/ipq40xx/patches-5.10/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch new file mode 100644 index 0000000000..5efdb72c44 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch @@ -0,0 +1,31 @@ +From 3e806a12d10af2581aa26c37b58439286eab9782 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 20 Dec 2019 16:02:16 -0300 +Subject: [PATCH 05/11] crypto: qce - update the skcipher IV + +Update the IV after the completion of each cipher operation. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + drivers/crypto/qce/skcipher.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -21,6 +21,7 @@ static void qce_skcipher_done(void *data + struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); + struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); + struct qce_device *qce = tmpl->qce; ++ struct qce_result_dump *result_buf = qce->dma.result_buf; + enum dma_data_direction dir_src, dir_dst; + u32 status; + int error; +@@ -45,6 +46,7 @@ static void qce_skcipher_done(void *data + if (error < 0) + dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); + ++ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize); + qce->async_req_done(tmpl->qce, error); + } + diff --git a/target/linux/ipq40xx/patches-5.10/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch b/target/linux/ipq40xx/patches-5.10/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch new file mode 100644 index 0000000000..84aef04ef4 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch @@ -0,0 +1,54 @@ +From 8ceda883205db6dfedb82e39f67feae3b50c95a1 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 20 Dec 2019 16:02:17 -0300 +Subject: [PATCH 06/11] crypto: qce - initialize fallback only for AES + +Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where +AES-192 is not handled by the qce hardware, and don't allocate & free +the fallback skcipher for other algorithms. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + drivers/crypto/qce/skcipher.c | 17 ++++++++++++++--- + 1 file changed, 14 insertions(+), 3 deletions(-) + +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -257,7 +257,14 @@ static int qce_skcipher_init(struct cryp + + memset(ctx, 0, sizeof(*ctx)); + crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); ++ return 0; ++} ++ ++static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); + ++ qce_skcipher_init(tfm); + ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base), + 0, CRYPTO_ALG_NEED_FALLBACK); + return PTR_ERR_OR_ZERO(ctx->fallback); +@@ -387,14 +394,18 @@ static int qce_skcipher_register_one(con + + alg->base.cra_priority = 300; + alg->base.cra_flags = CRYPTO_ALG_ASYNC | +- CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_KERN_DRIVER_ONLY; + alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); + alg->base.cra_alignmask = 0; + alg->base.cra_module = THIS_MODULE; + +- alg->init = qce_skcipher_init; +- alg->exit = qce_skcipher_exit; ++ if (IS_AES(def->flags)) { ++ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK; ++ alg->init = qce_skcipher_init_fallback; ++ alg->exit = qce_skcipher_exit; ++ } else { ++ alg->init = qce_skcipher_init; ++ } + + INIT_LIST_HEAD(&tmpl->entry); + tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; diff --git a/target/linux/ipq40xx/patches-5.10/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch b/target/linux/ipq40xx/patches-5.10/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch new file mode 100644 index 0000000000..5b1372d08f --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch @@ -0,0 +1,419 @@ +From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 20 Dec 2019 16:02:18 -0300 +Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers + +Allow the user to choose whether to build support for all algorithms +(default), hashes-only, or skciphers-only. + +The QCE engine does not appear to scale as well as the CPU to handle +multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the +QCE handles only 2 requests in parallel. + +Ipsec throughput seems to improve when disabling either family of +algorithms, sharing the load with the CPU. Enabling skciphers-only +appears to work best. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -617,6 +617,14 @@ config CRYPTO_DEV_QCE + tristate "Qualcomm crypto engine accelerator" + depends on ARCH_QCOM || COMPILE_TEST + depends on HAS_IOMEM ++ help ++ This driver supports Qualcomm crypto engine accelerator ++ hardware. To compile this driver as a module, choose M here. The ++ module will be called qcrypto. ++ ++config CRYPTO_DEV_QCE_SKCIPHER ++ bool ++ depends on CRYPTO_DEV_QCE + select CRYPTO_AES + select CRYPTO_LIB_DES + select CRYPTO_ECB +@@ -624,10 +632,57 @@ config CRYPTO_DEV_QCE + select CRYPTO_XTS + select CRYPTO_CTR + select CRYPTO_BLKCIPHER ++ ++config CRYPTO_DEV_QCE_SHA ++ bool ++ depends on CRYPTO_DEV_QCE ++ ++choice ++ prompt "Algorithms enabled for QCE acceleration" ++ default CRYPTO_DEV_QCE_ENABLE_ALL ++ depends on CRYPTO_DEV_QCE + help +- This driver supports Qualcomm crypto engine accelerator +- hardware. To compile this driver as a module, choose M here. The +- module will be called qcrypto. ++ This option allows to choose whether to build support for all algorihtms ++ (default), hashes-only, or skciphers-only. ++ ++ The QCE engine does not appear to scale as well as the CPU to handle ++ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the ++ QCE handles only 2 requests in parallel. ++ ++ Ipsec throughput seems to improve when disabling either family of ++ algorithms, sharing the load with the CPU. Enabling skciphers-only ++ appears to work best. ++ ++ config CRYPTO_DEV_QCE_ENABLE_ALL ++ bool "All supported algorithms" ++ select CRYPTO_DEV_QCE_SKCIPHER ++ select CRYPTO_DEV_QCE_SHA ++ help ++ Enable all supported algorithms: ++ - AES (CBC, CTR, ECB, XTS) ++ - 3DES (CBC, ECB) ++ - DES (CBC, ECB) ++ - SHA1, HMAC-SHA1 ++ - SHA256, HMAC-SHA256 ++ ++ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER ++ bool "Symmetric-key ciphers only" ++ select CRYPTO_DEV_QCE_SKCIPHER ++ help ++ Enable symmetric-key ciphers only: ++ - AES (CBC, CTR, ECB, XTS) ++ - 3DES (ECB, CBC) ++ - DES (ECB, CBC) ++ ++ config CRYPTO_DEV_QCE_ENABLE_SHA ++ bool "Hash/HMAC only" ++ select CRYPTO_DEV_QCE_SHA ++ help ++ Enable hashes/HMAC algorithms only: ++ - SHA1, HMAC-SHA1 ++ - SHA256, HMAC-SHA256 ++ ++endchoice + + config CRYPTO_DEV_QCOM_RNG + tristate "Qualcomm Random Number Generator Driver" +--- a/drivers/crypto/qce/Makefile ++++ b/drivers/crypto/qce/Makefile +@@ -2,6 +2,7 @@ + obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o + qcrypto-objs := core.o \ + common.o \ +- dma.o \ +- sha.o \ +- skcipher.o ++ dma.o ++ ++qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o ++qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o +--- a/drivers/crypto/qce/common.c ++++ b/drivers/crypto/qce/common.c +@@ -45,52 +45,56 @@ qce_clear_array(struct qce_device *qce, + qce_write(qce, offset + i * sizeof(u32), 0); + } + +-static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) ++static u32 qce_config_reg(struct qce_device *qce, int little) + { +- u32 cfg = 0; ++ u32 beats = (qce->burst_size >> 3) - 1; ++ u32 pipe_pair = qce->pipe_pair_id; ++ u32 config; + +- if (IS_AES(flags)) { +- if (aes_key_size == AES_KEYSIZE_128) +- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; +- else if (aes_key_size == AES_KEYSIZE_256) +- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; +- } ++ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; ++ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | ++ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); ++ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; ++ config &= ~HIGH_SPD_EN_N_SHIFT; + +- if (IS_AES(flags)) +- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; +- else if (IS_DES(flags) || IS_3DES(flags)) +- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; ++ if (little) ++ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); + +- if (IS_DES(flags)) +- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; ++ return config; ++} + +- if (IS_3DES(flags)) +- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; ++void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) ++{ ++ __be32 *d = dst; ++ const u8 *s = src; ++ unsigned int n; + +- switch (flags & QCE_MODE_MASK) { +- case QCE_MODE_ECB: +- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; +- break; +- case QCE_MODE_CBC: +- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; +- break; +- case QCE_MODE_CTR: +- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; +- break; +- case QCE_MODE_XTS: +- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; +- break; +- case QCE_MODE_CCM: +- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; +- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; +- break; +- default: +- return ~0; ++ n = len / sizeof(u32); ++ for (; n > 0; n--) { ++ *d = cpu_to_be32p((const __u32 *) s); ++ s += sizeof(__u32); ++ d++; + } ++} + +- return cfg; ++static void qce_setup_config(struct qce_device *qce) ++{ ++ u32 config; ++ ++ /* get big endianness */ ++ config = qce_config_reg(qce, 0); ++ ++ /* clear status */ ++ qce_write(qce, REG_STATUS, 0); ++ qce_write(qce, REG_CONFIG, config); ++} ++ ++static inline void qce_crypto_go(struct qce_device *qce) ++{ ++ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); + } + ++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA + static u32 qce_auth_cfg(unsigned long flags, u32 key_size) + { + u32 cfg = 0; +@@ -137,88 +141,6 @@ static u32 qce_auth_cfg(unsigned long fl + return cfg; + } + +-static u32 qce_config_reg(struct qce_device *qce, int little) +-{ +- u32 beats = (qce->burst_size >> 3) - 1; +- u32 pipe_pair = qce->pipe_pair_id; +- u32 config; +- +- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; +- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | +- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); +- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; +- config &= ~HIGH_SPD_EN_N_SHIFT; +- +- if (little) +- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); +- +- return config; +-} +- +-void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) +-{ +- __be32 *d = dst; +- const u8 *s = src; +- unsigned int n; +- +- n = len / sizeof(u32); +- for (; n > 0; n--) { +- *d = cpu_to_be32p((const __u32 *) s); +- s += sizeof(__u32); +- d++; +- } +-} +- +-static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) +-{ +- u8 swap[QCE_AES_IV_LENGTH]; +- u32 i, j; +- +- if (ivsize > QCE_AES_IV_LENGTH) +- return; +- +- memset(swap, 0, QCE_AES_IV_LENGTH); +- +- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; +- i < QCE_AES_IV_LENGTH; i++, j--) +- swap[i] = src[j]; +- +- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); +-} +- +-static void qce_xtskey(struct qce_device *qce, const u8 *enckey, +- unsigned int enckeylen, unsigned int cryptlen) +-{ +- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; +- unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); +- unsigned int xtsdusize; +- +- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, +- enckeylen / 2); +- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); +- +- /* xts du size 512B */ +- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); +- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); +-} +- +-static void qce_setup_config(struct qce_device *qce) +-{ +- u32 config; +- +- /* get big endianness */ +- config = qce_config_reg(qce, 0); +- +- /* clear status */ +- qce_write(qce, REG_STATUS, 0); +- qce_write(qce, REG_CONFIG, config); +-} +- +-static inline void qce_crypto_go(struct qce_device *qce) +-{ +- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); +-} +- + static int qce_setup_regs_ahash(struct crypto_async_request *async_req, + u32 totallen, u32 offset) + { +@@ -303,6 +225,87 @@ go_proc: + + return 0; + } ++#endif ++ ++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER ++static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) ++{ ++ u32 cfg = 0; ++ ++ if (IS_AES(flags)) { ++ if (aes_key_size == AES_KEYSIZE_128) ++ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; ++ else if (aes_key_size == AES_KEYSIZE_256) ++ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; ++ } ++ ++ if (IS_AES(flags)) ++ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; ++ else if (IS_DES(flags) || IS_3DES(flags)) ++ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; ++ ++ if (IS_DES(flags)) ++ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; ++ ++ if (IS_3DES(flags)) ++ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; ++ ++ switch (flags & QCE_MODE_MASK) { ++ case QCE_MODE_ECB: ++ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; ++ break; ++ case QCE_MODE_CBC: ++ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; ++ break; ++ case QCE_MODE_CTR: ++ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; ++ break; ++ case QCE_MODE_XTS: ++ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; ++ break; ++ case QCE_MODE_CCM: ++ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; ++ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; ++ break; ++ default: ++ return ~0; ++ } ++ ++ return cfg; ++} ++ ++static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) ++{ ++ u8 swap[QCE_AES_IV_LENGTH]; ++ u32 i, j; ++ ++ if (ivsize > QCE_AES_IV_LENGTH) ++ return; ++ ++ memset(swap, 0, QCE_AES_IV_LENGTH); ++ ++ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; ++ i < QCE_AES_IV_LENGTH; i++, j--) ++ swap[i] = src[j]; ++ ++ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); ++} ++ ++static void qce_xtskey(struct qce_device *qce, const u8 *enckey, ++ unsigned int enckeylen, unsigned int cryptlen) ++{ ++ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; ++ unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); ++ unsigned int xtsdusize; ++ ++ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, ++ enckeylen / 2); ++ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); ++ ++ /* xts du size 512B */ ++ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); ++ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); ++} + + static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, + u32 totallen, u32 offset) +@@ -384,15 +387,20 @@ static int qce_setup_regs_skcipher(struc + + return 0; + } ++#endif + + int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen, + u32 offset) + { + switch (type) { ++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER + case CRYPTO_ALG_TYPE_SKCIPHER: + return qce_setup_regs_skcipher(async_req, totallen, offset); ++#endif ++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA + case CRYPTO_ALG_TYPE_AHASH: + return qce_setup_regs_ahash(async_req, totallen, offset); ++#endif + default: + return -EINVAL; + } +--- a/drivers/crypto/qce/core.c ++++ b/drivers/crypto/qce/core.c +@@ -22,8 +22,12 @@ + #define QCE_QUEUE_LENGTH 1 + + static const struct qce_algo_ops *qce_ops[] = { ++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER + &skcipher_ops, ++#endif ++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA + &ahash_ops, ++#endif + }; + + static void qce_unregister_algs(struct qce_device *qce) diff --git a/target/linux/ipq40xx/patches-5.10/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch b/target/linux/ipq40xx/patches-5.10/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch new file mode 100644 index 0000000000..160420b485 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch @@ -0,0 +1,89 @@ +From d6364b8128439a8c0e381f80c38667de9f15eef8 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 7 Feb 2020 12:02:25 -0300 +Subject: [PATCH 09/11] crypto: qce - use cryptlen when adding extra sgl + +The qce crypto driver appends an extra entry to the dst sgl, to maintain +private state information. + +When the gcm driver sends requests to the ctr skcipher, it passes the +authentication tag after the actual crypto payload, but it must not be +touched. + +Commit 1336c2221bee ("crypto: qce - save a sg table slot for result +buf") limited the destination sgl to avoid overwriting the +authentication tag but it assumed the tag would be in a separate sgl +entry. + +This is not always the case, so it is better to limit the length of the +destination buffer to req->cryptlen before appending the result buf. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + drivers/crypto/qce/dma.c | 11 ++++++----- + drivers/crypto/qce/dma.h | 2 +- + drivers/crypto/qce/skcipher.c | 5 +++-- + 3 files changed, 10 insertions(+), 8 deletions(-) + +--- a/drivers/crypto/qce/dma.c ++++ b/drivers/crypto/qce/dma.c +@@ -48,9 +48,10 @@ void qce_dma_release(struct qce_dma_data + + struct scatterlist * + qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, +- int max_ents) ++ unsigned int max_len) + { + struct scatterlist *sg = sgt->sgl, *sg_last = NULL; ++ unsigned int new_len; + + while (sg) { + if (!sg_page(sg)) +@@ -61,13 +62,13 @@ qce_sgtable_add(struct sg_table *sgt, st + if (!sg) + return ERR_PTR(-EINVAL); + +- while (new_sgl && sg && max_ents) { +- sg_set_page(sg, sg_page(new_sgl), new_sgl->length, +- new_sgl->offset); ++ while (new_sgl && sg && max_len) { ++ new_len = new_sgl->length > max_len ? max_len : new_sgl->length; ++ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset); + sg_last = sg; + sg = sg_next(sg); + new_sgl = sg_next(new_sgl); +- max_ents--; ++ max_len -= new_len; + } + + return sg_last; +--- a/drivers/crypto/qce/dma.h ++++ b/drivers/crypto/qce/dma.h +@@ -43,6 +43,6 @@ void qce_dma_issue_pending(struct qce_dm + int qce_dma_terminate_all(struct qce_dma_data *dma); + struct scatterlist * + qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, +- int max_ents); ++ unsigned int max_len); + + #endif /* _DMA_H_ */ +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -97,13 +97,14 @@ qce_skcipher_async_req_handle(struct cry + + sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); + +- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); ++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen); + if (IS_ERR(sg)) { + ret = PTR_ERR(sg); + goto error_free; + } + +- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); ++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, ++ QCE_RESULT_BUF_SZ); + if (IS_ERR(sg)) { + ret = PTR_ERR(sg); + goto error_free; diff --git a/target/linux/ipq40xx/patches-5.10/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch b/target/linux/ipq40xx/patches-5.10/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch new file mode 100644 index 0000000000..0b5c8c6d66 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch @@ -0,0 +1,113 @@ +From ce163ba0bf298f1707321ac025ef639f88e62801 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 7 Feb 2020 12:02:26 -0300 +Subject: [PATCH 10/11] crypto: qce - use AES fallback for small requests + +Process small blocks using the fallback cipher, as a workaround for an +observed failure (DMA-related, apparently) when computing the GCM ghash +key. This brings a speed gain as well, since it avoids the latency of +using the hardware engine to process small blocks. + +Using software for all 16-byte requests would be enough to make GCM +work, but to increase performance, a larger threshold would be better. +Measuring the performance of supported ciphers with openssl speed, +software matches hardware at around 768-1024 bytes. + +Considering the 256-bit ciphers, software is 2-3 times faster than qce +at 256-bytes, 30% faster at 512, and about even at 768-bytes. With +128-bit keys, the break-even point would be around 1024-bytes. + +This adds the 'aes_sw_max_len' parameter, to set the largest request +length processed by the software fallback. Its default is being set to +512 bytes, a little lower than the break-even point, to balance the cost +in CPU usage. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -684,6 +684,29 @@ choice + + endchoice + ++config CRYPTO_DEV_QCE_SW_MAX_LEN ++ int "Default maximum request size to use software for AES" ++ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER ++ default 512 ++ help ++ This sets the default maximum request size to perform AES requests ++ using software instead of the crypto engine. It can be changed by ++ setting the aes_sw_max_len parameter. ++ ++ Small blocks are processed faster in software than hardware. ++ Considering the 256-bit ciphers, software is 2-3 times faster than ++ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes. ++ With 128-bit keys, the break-even point would be around 1024-bytes. ++ ++ The default is set a little lower, to 512 bytes, to balance the ++ cost in CPU usage. The minimum recommended setting is 16-bytes ++ (1 AES block), since AES-GCM will fail if you set it lower. ++ Setting this to zero will send all requests to the hardware. ++ ++ Note that 192-bit keys are not supported by the hardware and are ++ always processed by the software fallback, and all DES requests ++ are done by the hardware. ++ + config CRYPTO_DEV_QCOM_RNG + tristate "Qualcomm Random Number Generator Driver" + depends on ARCH_QCOM || COMPILE_TEST +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -5,6 +5,7 @@ + + #include <linux/device.h> + #include <linux/interrupt.h> ++#include <linux/moduleparam.h> + #include <linux/types.h> + #include <crypto/aes.h> + #include <crypto/internal/des.h> +@@ -12,6 +13,13 @@ + + #include "cipher.h" + ++static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN; ++module_param(aes_sw_max_len, uint, 0644); ++MODULE_PARM_DESC(aes_sw_max_len, ++ "Only use hardware for AES requests larger than this " ++ "[0=always use hardware; anything <16 breaks AES-GCM; default=" ++ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]"); ++ + static LIST_HEAD(skcipher_algs); + + static void qce_skcipher_done(void *data) +@@ -166,15 +174,10 @@ static int qce_skcipher_setkey(struct cr + switch (IS_XTS(flags) ? keylen >> 1 : keylen) { + case AES_KEYSIZE_128: + case AES_KEYSIZE_256: ++ memcpy(ctx->enc_key, key, keylen); + break; +- default: +- goto fallback; + } + +- ctx->enc_keylen = keylen; +- memcpy(ctx->enc_key, key, keylen); +- return 0; +-fallback: + ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); + if (!ret) + ctx->enc_keylen = keylen; +@@ -224,8 +227,9 @@ static int qce_skcipher_crypt(struct skc + rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; + keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; + +- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && +- keylen != AES_KEYSIZE_256) { ++ if (IS_AES(rctx->flags) && ++ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || ++ req->cryptlen <= aes_sw_max_len)) { + SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); + + skcipher_request_set_sync_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-5.10/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch b/target/linux/ipq40xx/patches-5.10/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch new file mode 100644 index 0000000000..18beda6296 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch @@ -0,0 +1,59 @@ +From 7f19380b2cfd412dcef2facefb3f6c62788864d7 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz <cotequeiroz@gmail.com> +Date: Fri, 7 Feb 2020 12:02:27 -0300 +Subject: [PATCH 11/11] crypto: qce - handle AES-XTS cases that qce fails + +QCE hangs when presented with an AES-XTS request whose length is larger +than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the +fallback cipher handle them. + +Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> +Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> +--- + drivers/crypto/qce/common.c | 2 -- + drivers/crypto/qce/common.h | 3 +++ + drivers/crypto/qce/skcipher.c | 9 +++++++-- + 3 files changed, 10 insertions(+), 4 deletions(-) + +--- a/drivers/crypto/qce/common.c ++++ b/drivers/crypto/qce/common.c +@@ -15,8 +15,6 @@ + #include "regs-v5.h" + #include "sha.h" + +-#define QCE_SECTOR_SIZE 512 +- + static inline u32 qce_read(struct qce_device *qce, u32 offset) + { + return readl(qce->base + offset); +--- a/drivers/crypto/qce/common.h ++++ b/drivers/crypto/qce/common.h +@@ -12,6 +12,9 @@ + #include <crypto/hash.h> + #include <crypto/internal/skcipher.h> + ++/* xts du size */ ++#define QCE_SECTOR_SIZE 512 ++ + /* key size in bytes */ + #define QCE_SHA_HMAC_KEY_SIZE 64 + #define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256 +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -227,9 +227,14 @@ static int qce_skcipher_crypt(struct skc + rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; + keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; + ++ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and ++ * is not a multiple of it; pass such requests to the fallback ++ */ + if (IS_AES(rctx->flags) && +- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || +- req->cryptlen <= aes_sw_max_len)) { ++ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || ++ req->cryptlen <= aes_sw_max_len) || ++ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE && ++ req->cryptlen % QCE_SECTOR_SIZE))) { + SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); + + skcipher_request_set_sync_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-5.10/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch b/target/linux/ipq40xx/patches-5.10/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch new file mode 100644 index 0000000000..ad09a9f250 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch @@ -0,0 +1,197 @@ +From 3c9d8f6c03a2cda1849ec3c84f82ec030d1f49ef Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Sun, 3 May 2020 22:18:22 +0200 +Subject: [PATCH] phy: add driver for Qualcomm IPQ40xx USB PHY + +Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs. +The driver sets up HS and SS phys. + +Signed-off-by: John Crispin <john@phrozen.org> +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +Cc: Luka Perkov <luka.perkov@sartura.hr> +Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + drivers/phy/qualcomm/Kconfig | 7 + + drivers/phy/qualcomm/Makefile | 1 + + drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 148 ++++++++++++++++++++ + 3 files changed, 156 insertions(+) + create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c + +--- a/drivers/phy/qualcomm/Kconfig ++++ b/drivers/phy/qualcomm/Kconfig +@@ -18,6 +18,13 @@ config PHY_QCOM_APQ8064_SATA + depends on OF + select GENERIC_PHY + ++config PHY_QCOM_IPQ4019_USB ++ tristate "Qualcomm IPQ4019 USB PHY driver" ++ depends on OF && (ARCH_QCOM || COMPILE_TEST) ++ select GENERIC_PHY ++ help ++ Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. ++ + config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM +--- a/drivers/phy/qualcomm/Makefile ++++ b/drivers/phy/qualcomm/Makefile +@@ -1,6 +1,7 @@ + # SPDX-License-Identifier: GPL-2.0 + obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o + obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o ++obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o + obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o + obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o + obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o +--- /dev/null ++++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c +@@ -0,0 +1,148 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++/* ++ * Copyright (C) 2018 John Crispin <john@phrozen.org> ++ * ++ * Based on code from ++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com> ++ * ++ */ ++ ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/mutex.h> ++#include <linux/of_platform.h> ++#include <linux/of_device.h> ++#include <linux/phy/phy.h> ++#include <linux/platform_device.h> ++#include <linux/reset.h> ++ ++struct ipq4019_usb_phy { ++ struct device *dev; ++ struct phy *phy; ++ void __iomem *base; ++ struct reset_control *por_rst; ++ struct reset_control *srif_rst; ++}; ++ ++static int ipq4019_ss_phy_power_off(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ reset_control_assert(phy->por_rst); ++ msleep(10); ++ ++ return 0; ++} ++ ++static int ipq4019_ss_phy_power_on(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ ipq4019_ss_phy_power_off(_phy); ++ ++ reset_control_deassert(phy->por_rst); ++ ++ return 0; ++} ++ ++static struct phy_ops ipq4019_usb_ss_phy_ops = { ++ .power_on = ipq4019_ss_phy_power_on, ++ .power_off = ipq4019_ss_phy_power_off, ++}; ++ ++static int ipq4019_hs_phy_power_off(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ reset_control_assert(phy->por_rst); ++ msleep(10); ++ ++ reset_control_assert(phy->srif_rst); ++ msleep(10); ++ ++ return 0; ++} ++ ++static int ipq4019_hs_phy_power_on(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ ipq4019_hs_phy_power_off(_phy); ++ ++ reset_control_deassert(phy->srif_rst); ++ msleep(10); ++ ++ reset_control_deassert(phy->por_rst); ++ ++ return 0; ++} ++ ++static struct phy_ops ipq4019_usb_hs_phy_ops = { ++ .power_on = ipq4019_hs_phy_power_on, ++ .power_off = ipq4019_hs_phy_power_off, ++}; ++ ++static const struct of_device_id ipq4019_usb_phy_of_match[] = { ++ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops}, ++ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops}, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match); ++ ++static int ipq4019_usb_phy_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ struct phy_provider *phy_provider; ++ struct ipq4019_usb_phy *phy; ++ ++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); ++ if (!phy) ++ return -ENOMEM; ++ ++ phy->dev = &pdev->dev; ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ phy->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(phy->base)) { ++ dev_err(dev, "failed to remap register memory\n"); ++ return PTR_ERR(phy->base); ++ } ++ ++ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); ++ if (IS_ERR(phy->por_rst)) { ++ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER) ++ dev_err(dev, "POR reset is missing\n"); ++ return PTR_ERR(phy->por_rst); ++ } ++ ++ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst"); ++ if (IS_ERR(phy->srif_rst)) ++ return PTR_ERR(phy->srif_rst); ++ ++ phy->phy = devm_phy_create(dev, NULL, of_device_get_match_data(dev)); ++ if (IS_ERR(phy->phy)) { ++ dev_err(dev, "failed to create PHY\n"); ++ return PTR_ERR(phy->phy); ++ } ++ phy_set_drvdata(phy->phy, phy); ++ ++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); ++ ++ return PTR_ERR_OR_ZERO(phy_provider); ++} ++ ++static struct platform_driver ipq4019_usb_phy_driver = { ++ .probe = ipq4019_usb_phy_probe, ++ .driver = { ++ .of_match_table = ipq4019_usb_phy_of_match, ++ .name = "ipq4019-usb-phy", ++ } ++}; ++module_platform_driver(ipq4019_usb_phy_driver); ++ ++MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); ++MODULE_AUTHOR("John Crispin <john@phrozen.org>"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq40xx/patches-5.10/0018-v5.9-pinctrl-msm-open-drain.patch b/target/linux/ipq40xx/patches-5.10/0018-v5.9-pinctrl-msm-open-drain.patch new file mode 100644 index 0000000000..5cd4ccc30f --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0018-v5.9-pinctrl-msm-open-drain.patch @@ -0,0 +1,81 @@ +From 5b08c1d567ee8e6af94696b3e549997cbdb2bb80 Mon Sep 17 00:00:00 2001 +From: Jaiganesh Narayanan <njaigane@codeaurora.org> +Date: Thu, 1 Sep 2016 10:40:38 +0530 +Subject: [PATCH] pinctrl: qcom: ipq4019: add open drain support + +Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org> +[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based + WiFi APs. ] +Signed-off-by: Brian Norris <computersforpeace@gmail.com> +--- +https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/ + + drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1 + + drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++++ + drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++ + 3 files changed, 16 insertions(+) + +--- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c ++++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c +@@ -254,6 +254,7 @@ DECLARE_QCA_GPIO_PINS(99); + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ ++ .od_bit = 12, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ +--- a/drivers/pinctrl/qcom/pinctrl-msm.c ++++ b/drivers/pinctrl/qcom/pinctrl-msm.c +@@ -225,6 +225,10 @@ static int msm_config_reg(struct msm_pin + *bit = g->pull_bit; + *mask = 3; + break; ++ case PIN_CONFIG_DRIVE_OPEN_DRAIN: ++ *bit = g->od_bit; ++ *mask = 1; ++ break; + case PIN_CONFIG_DRIVE_STRENGTH: + *bit = g->drv_bit; + *mask = 7; +@@ -302,6 +306,12 @@ static int msm_config_group_get(struct p + if (!arg) + return -EINVAL; + break; ++ case PIN_CONFIG_DRIVE_OPEN_DRAIN: ++ /* Pin is not open-drain */ ++ if (!arg) ++ return -EINVAL; ++ arg = 1; ++ break; + case PIN_CONFIG_DRIVE_STRENGTH: + arg = msm_regval_to_drive(arg); + break; +@@ -374,6 +384,9 @@ static int msm_config_group_set(struct p + else + arg = MSM_PULL_UP; + break; ++ case PIN_CONFIG_DRIVE_OPEN_DRAIN: ++ arg = 1; ++ break; + case PIN_CONFIG_DRIVE_STRENGTH: + /* Check for invalid values */ + if (arg > 16 || arg < 2 || (arg % 2) != 0) +--- a/drivers/pinctrl/qcom/pinctrl-msm.h ++++ b/drivers/pinctrl/qcom/pinctrl-msm.h +@@ -38,6 +38,7 @@ struct msm_function { + * @mux_bit: Offset in @ctl_reg for the pinmux function selection. + * @pull_bit: Offset in @ctl_reg for the bias configuration. + * @drv_bit: Offset in @ctl_reg for the drive strength configuration. ++ * @od_bit: Offset in @ctl_reg for controlling open drain. + * @oe_bit: Offset in @ctl_reg for controlling output enable. + * @in_bit: Offset in @io_reg for the input bit value. + * @out_bit: Offset in @io_reg for the output bit value. +@@ -75,6 +76,7 @@ struct msm_pingroup { + unsigned pull_bit:5; + unsigned drv_bit:5; + ++ unsigned od_bit:5; + unsigned oe_bit:5; + unsigned in_bit:5; + unsigned out_bit:5; diff --git a/target/linux/ipq40xx/patches-5.10/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch b/target/linux/ipq40xx/patches-5.10/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch new file mode 100644 index 0000000000..f1be01c8e1 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch @@ -0,0 +1,29 @@ +From 707745e8d4e75b638b990d67950ab292b3b8ea2a Mon Sep 17 00:00:00 2001 +From: David Bauer <mail@david-bauer.net> +Date: Mon, 16 Dec 2019 01:36:46 +0100 +Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f + +Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix. +The chip has 4MB of total capacity, divided into a total of 64 sectors, +each 64KB sized. The chip also supports 4KB large sectors. +Additionally, it supports dual and quad read modes. + +Functionality was verified on an HPE/Aruba AP-303 board. + +Signed-off-by: David Bauer <mail@david-bauer.net> +Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> +--- + drivers/mtd/spi-nor/spi-nor.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -2353,6 +2353,8 @@ static const struct flash_info spi_nor_i + { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, + { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, + { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, ++ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, diff --git a/target/linux/ipq40xx/patches-5.10/100-GPIO-add-named-gpio-exports.patch b/target/linux/ipq40xx/patches-5.10/100-GPIO-add-named-gpio-exports.patch new file mode 100644 index 0000000000..805836fcca --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/100-GPIO-add-named-gpio-exports.patch @@ -0,0 +1,165 @@ +From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Tue, 12 Aug 2014 20:49:27 +0200 +Subject: [PATCH 24/53] GPIO: add named gpio exports + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ + drivers/gpio/gpiolib-sysfs.c | 10 +++++- + include/asm-generic/gpio.h | 6 ++++ + include/linux/gpio/consumer.h | 8 +++++ + 4 files changed, 91 insertions(+), 1 deletion(-) + +--- a/drivers/gpio/gpiolib-of.c ++++ b/drivers/gpio/gpiolib-of.c +@@ -19,6 +19,8 @@ + #include <linux/pinctrl/pinctrl.h> + #include <linux/slab.h> + #include <linux/gpio/machine.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> + + #include "gpiolib.h" + #include "gpiolib-of.h" +@@ -915,3 +917,68 @@ void of_gpiochip_remove(struct gpio_chip + { + of_node_put(chip->of_node); + } ++ ++static struct of_device_id gpio_export_ids[] = { ++ { .compatible = "gpio-export" }, ++ { /* sentinel */ } ++}; ++ ++static int of_gpio_export_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *cnp; ++ u32 val; ++ int nb = 0; ++ ++ for_each_child_of_node(np, cnp) { ++ const char *name = NULL; ++ int gpio; ++ bool dmc; ++ int max_gpio = 1; ++ int i; ++ ++ of_property_read_string(cnp, "gpio-export,name", &name); ++ ++ if (!name) ++ max_gpio = of_gpio_count(cnp); ++ ++ for (i = 0; i < max_gpio; i++) { ++ unsigned flags = 0; ++ enum of_gpio_flags of_flags; ++ ++ gpio = of_get_gpio_flags(cnp, i, &of_flags); ++ if (!gpio_is_valid(gpio)) ++ return gpio; ++ ++ if (of_flags == OF_GPIO_ACTIVE_LOW) ++ flags |= GPIOF_ACTIVE_LOW; ++ ++ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) ++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; ++ else ++ flags |= GPIOF_IN; ++ ++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) ++ continue; ++ ++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); ++ gpio_export_with_name(gpio, dmc, name); ++ nb++; ++ } ++ } ++ ++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); ++ ++ return 0; ++} ++ ++static struct platform_driver gpio_export_driver = { ++ .driver = { ++ .name = "gpio-export", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(gpio_export_ids), ++ }, ++ .probe = of_gpio_export_probe, ++}; ++ ++module_platform_driver(gpio_export_driver); +--- a/drivers/gpio/gpiolib-sysfs.c ++++ b/drivers/gpio/gpiolib-sysfs.c +@@ -571,7 +571,7 @@ static struct class gpio_class = { + * + * Returns zero on success, else an error. + */ +-int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) + { + struct gpio_chip *chip; + struct gpio_device *gdev; +@@ -633,6 +633,8 @@ int gpiod_export(struct gpio_desc *desc, + offset = gpio_chip_hwgpio(desc); + if (chip->names && chip->names[offset]) + ioname = chip->names[offset]; ++ if (name) ++ ioname = name; + + dev = device_create_with_groups(&gpio_class, &gdev->dev, + MKDEV(0, 0), data, gpio_groups, +@@ -654,6 +656,12 @@ err_unlock: + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; + } ++EXPORT_SYMBOL_GPL(__gpiod_export); ++ ++int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++{ ++ return __gpiod_export(desc, direction_may_change, NULL); ++} + EXPORT_SYMBOL_GPL(gpiod_export); + + static int match_export(struct device *dev, const void *desc) +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g + return gpiod_export(gpio_to_desc(gpio), direction_may_change); + } + ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); ++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) ++{ ++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); ++} ++ + static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -668,6 +668,7 @@ static inline void devm_acpi_dev_remove_ + + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) + ++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); +@@ -675,6 +676,13 @@ void gpiod_unexport(struct gpio_desc *de + + #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ + ++static inline int _gpiod_export(struct gpio_desc *desc, ++ bool direction_may_change, ++ const char *name) ++{ ++ return -ENOSYS; ++} ++ + static inline int gpiod_export(struct gpio_desc *desc, + bool direction_may_change) + { diff --git a/target/linux/ipq40xx/patches-5.10/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-5.10/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch new file mode 100644 index 0000000000..14affc28c1 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch @@ -0,0 +1,32 @@ +From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Wed, 22 Jan 2020 12:56:35 +0100 +Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node + +Since we now have driver for the SDHCI VQMMC LDO needed +for I/0 voltage levels lets introduce the necessary node for it. + +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -209,6 +209,16 @@ + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + }; + ++ vqmmc: regulator@1948000 { ++ compatible = "qcom,vqmmc-ipq4019-regulator"; ++ reg = <0x01948000 0x4>; ++ regulator-name = "vqmmc"; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-always-on; ++ status = "disabled"; ++ }; ++ + sdhci: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x11c>, <0x7824000 0x800>; diff --git a/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch new file mode 100644 index 0000000000..b033a1baee --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch @@ -0,0 +1,97 @@ +From 193856b5fe11c50a0b6ff22457dd674c1a45fec6 Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Wed, 9 Sep 2020 18:31:03 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes + +Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI. + +Signed-off-by: John Crispin <john@phrozen.org> +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +Cc: Luka Perkov <luka.perkov@sartura.hr> +Reviewed-by: Vinod Koul <vkoul@kernel.org> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++ + 1 file changed, 74 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -615,5 +615,79 @@ + reg = <4>; + }; + }; ++ ++ usb3_ss_phy: ssphy@9a000 { ++ compatible = "qcom,usb-ss-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0x9a000 0x800>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB3_UNIPHY_PHY_ARES>; ++ reset-names = "por_rst"; ++ status = "disabled"; ++ }; ++ ++ usb3_hs_phy: hsphy@a6000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0xa6000 0x40>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++ status = "disabled"; ++ }; ++ ++ usb3: usb3@8af8800 { ++ compatible = "qcom,dwc3"; ++ reg = <0x8af8800 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc GCC_USB3_MASTER_CLK>, ++ <&gcc GCC_USB3_SLEEP_CLK>, ++ <&gcc GCC_USB3_MOCK_UTMI_CLK>; ++ clock-names = "master", "sleep", "mock_utmi"; ++ ranges; ++ status = "disabled"; ++ ++ dwc3@8a00000 { ++ compatible = "snps,dwc3"; ++ reg = <0x8a00000 0xf8000>; ++ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; ++ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ dr_mode = "host"; ++ }; ++ }; ++ ++ usb2_hs_phy: hsphy@a8000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0xa8000 0x40>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++ status = "disabled"; ++ }; ++ ++ usb2: usb2@60f8800 { ++ compatible = "qcom,dwc3"; ++ reg = <0x60f8800 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc GCC_USB2_MASTER_CLK>, ++ <&gcc GCC_USB2_SLEEP_CLK>, ++ <&gcc GCC_USB2_MOCK_UTMI_CLK>; ++ clock-names = "master", "sleep", "mock_utmi"; ++ ranges; ++ status = "disabled"; ++ ++ dwc3@6000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x6000000 0xf8000>; ++ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; ++ phys = <&usb2_hs_phy>; ++ phy-names = "usb2-phy"; ++ dr_mode = "host"; ++ }; ++ }; + }; + }; diff --git a/target/linux/ipq40xx/patches-5.10/103-arm-dts-qcom-ipq4019-add-more-labels.patch b/target/linux/ipq40xx/patches-5.10/103-arm-dts-qcom-ipq4019-add-more-labels.patch new file mode 100644 index 0000000000..0e215ee7cf --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/103-arm-dts-qcom-ipq4019-add-more-labels.patch @@ -0,0 +1,42 @@ +From caa3ee6b094ee18021943504c938919fcac325ec Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Wed, 9 Sep 2020 20:40:33 +0200 +Subject: [PATCH] arm: dts: qcom: ipq4019: add more labels + +Lets add labels to more commonly used nodes for easier modification in board DTS files. + +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +Cc: Luka Perkov <luka.perkov@sartura.hr> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -190,7 +190,7 @@ + reg = <0x1800000 0x60000>; + }; + +- rng@22000 { ++ prng: rng@22000 { + compatible = "qcom,prng"; + reg = <0x22000 0x140>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; +@@ -310,7 +310,7 @@ + status = "disabled"; + }; + +- crypto@8e3a000 { ++ crypto: crypto@8e3a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x08e3a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, +@@ -396,7 +396,7 @@ + dma-names = "rx", "tx"; + }; + +- watchdog@b017000 { ++ watchdog: watchdog@b017000 { + compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; + reg = <0xb017000 0x40>; + clocks = <&sleep_clk>; diff --git a/target/linux/ipq40xx/patches-5.10/104-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-5.10/104-clk-fix-apss-cpu-overclocking.patch new file mode 100644 index 0000000000..25a2020bd2 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/104-clk-fix-apss-cpu-overclocking.patch @@ -0,0 +1,115 @@ +From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@googlemail.com> +Date: Sun, 11 Mar 2018 14:41:31 +0100 +Subject: [PATCH 2/2] clk: fix apss cpu overclocking + +There's an interaction issue between the clk changes:" +clk: qcom: ipq4019: Add the apss cpu pll divider clock node +clk: qcom: ipq4019: remove fixed clocks and add pll clocks +" and the cpufreq-dt. + +cpufreq-dt is now spamming the kernel-log with the following: + +[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP +for freq 761142857 (-34) + +This only happens on certain devices like the Compex WPJ428 +and AVM FritzBox!4040. However, other devices like the Asus +RT-AC58U and Meraki MR33 work just fine. + +The issue stem from the fact that all higher CPU-Clocks +are achieved by switching the clock-parent to the P_DDRPLLAPSS +(ddrpllapss). Which is set by Qualcomm's proprietary bootcode +as part of the DDR calibration. + +For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked +at round 533 MHz (ddrpllsdcc = 190285714 Hz). + +whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is +clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). + +This patch attempts to fix the issue by modifying +clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() +to use a new qcom_find_freq_close() function, which returns the closest +matching frequency, instead of the next higher. This way, the SoC in +the FB4040 (with its max clock speed of 710.4 MHz) will no longer +try to overclock to 761 MHz. + +Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +Signed-off-by: John Crispin <john@phrozen.org> +--- + drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- + 1 file changed, 31 insertions(+), 3 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq4019.c ++++ b/drivers/clk/qcom/gcc-ipq4019.c +@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe + .reg = 0x2f020, + }; + ++ ++const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, ++ unsigned long rate) ++{ ++ const struct freq_tbl *last = NULL; ++ ++ for ( ; f->freq; f++) { ++ if (rate == f->freq) ++ return f; ++ ++ if (f->freq > rate) { ++ if (!last || ++ (f->freq - rate) < (rate - last->freq)) ++ return f; ++ else ++ return last; ++ } ++ last = f; ++ } ++ ++ return last; ++} ++ + /* + * Round rate function for APSS CPU PLL Clock divider. + * It looks up the frequency table and returns the next higher frequency +@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc + struct clk_hw *p_hw; + const struct freq_tbl *f; + +- f = qcom_find_freq(pll->freq_tbl, rate); ++ f = qcom_find_freq_close(pll->freq_tbl, rate); + if (!f) + return -EINVAL; + +@@ -1278,7 +1301,7 @@ static int clk_cpu_div_set_rate(struct c + u32 mask; + int ret; + +- f = qcom_find_freq(pll->freq_tbl, rate); ++ f = qcom_find_freq_close(pll->freq_tbl, rate); + if (!f) + return -EINVAL; + +@@ -1305,6 +1328,7 @@ static unsigned long + clk_cpu_div_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) + { ++ const struct freq_tbl *f; + struct clk_fepll *pll = to_clk_fepll(hw); + u32 cdiv, pre_div; + u64 rate; +@@ -1325,7 +1349,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h + rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; + do_div(rate, pre_div); + +- return rate; ++ f = qcom_find_freq_close(pll->freq_tbl, rate); ++ if (!f) ++ return rate; ++ ++ return f->freq; + }; + + static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-5.10/300-clk-qcom-ipq4019-add-ess-reset.patch b/target/linux/ipq40xx/patches-5.10/300-clk-qcom-ipq4019-add-ess-reset.patch new file mode 100644 index 0000000000..4297f32e05 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/300-clk-qcom-ipq4019-add-ess-reset.patch @@ -0,0 +1,52 @@ +From 480c1f7648fc586db12d6003c717c23667a4fcf0 Mon Sep 17 00:00:00 2001 +From: Ram Chandra Jangir <rjangir@codeaurora.org> +Date: Tue, 28 Mar 2017 22:35:33 +0530 +Subject: [PATCH] clk: qcom: ipq4019: add ess reset + +Added the ESS reset in IPQ4019 GCC. + +Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org> +--- + drivers/clk/qcom/gcc-ipq4019.c | 11 +++++++++++ + include/dt-bindings/clock/qcom,gcc-ipq4019.h | 11 +++++++++++ + 2 files changed, 22 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq4019.c ++++ b/drivers/clk/qcom/gcc-ipq4019.c +@@ -1736,6 +1736,17 @@ static const struct qcom_reset_map gcc_i + [GCC_TCSR_BCR] = {0x22000, 0}, + [GCC_MPM_BCR] = {0x24000, 0}, + [GCC_SPDM_BCR] = {0x25000, 0}, ++ [ESS_MAC1_ARES] = {0x1200C, 0}, ++ [ESS_MAC2_ARES] = {0x1200C, 1}, ++ [ESS_MAC3_ARES] = {0x1200C, 2}, ++ [ESS_MAC4_ARES] = {0x1200C, 3}, ++ [ESS_MAC5_ARES] = {0x1200C, 4}, ++ [ESS_PSGMII_ARES] = {0x1200C, 5}, ++ [ESS_MAC1_CLK_DIS] = {0x1200C, 8}, ++ [ESS_MAC2_CLK_DIS] = {0x1200C, 9}, ++ [ESS_MAC3_CLK_DIS] = {0x1200C, 10}, ++ [ESS_MAC4_CLK_DIS] = {0x1200C, 11}, ++ [ESS_MAC5_CLK_DIS] = {0x1200C, 12}, + }; + + static const struct regmap_config gcc_ipq4019_regmap_config = { +--- a/include/dt-bindings/clock/qcom,gcc-ipq4019.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq4019.h +@@ -165,5 +165,16 @@ + #define GCC_QDSS_BCR 69 + #define GCC_MPM_BCR 70 + #define GCC_SPDM_BCR 71 ++#define ESS_MAC1_ARES 72 ++#define ESS_MAC2_ARES 73 ++#define ESS_MAC3_ARES 74 ++#define ESS_MAC4_ARES 75 ++#define ESS_MAC5_ARES 76 ++#define ESS_PSGMII_ARES 77 ++#define ESS_MAC1_CLK_DIS 78 ++#define ESS_MAC2_CLK_DIS 79 ++#define ESS_MAC3_CLK_DIS 80 ++#define ESS_MAC4_CLK_DIS 81 ++#define ESS_MAC5_CLK_DIS 82 + + #endif diff --git a/target/linux/ipq40xx/patches-5.10/301-arm-compressed-add-appended-DTB-section.patch b/target/linux/ipq40xx/patches-5.10/301-arm-compressed-add-appended-DTB-section.patch new file mode 100644 index 0000000000..7e6184fc73 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/301-arm-compressed-add-appended-DTB-section.patch @@ -0,0 +1,48 @@ +From 0843a61d6913bdac8889eb048ed89f7903059787 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Fri, 30 Oct 2020 13:36:31 +0100 +Subject: [PATCH] arm: compressed: add appended DTB section + +This adds a appended_dtb section to the ARM decompressor +linker script. + +This allows using the existing ARM zImage appended DTB support for +appending a DTB to the raw ELF kernel. + +Its size is set to 1MB max to match the zImage appended DTB size limit. + +To use it to pass the DTB to the kernel, objcopy is used: + +objcopy --set-section-flags=.appended_dtb=alloc,contents \ + --update-section=.appended_dtb=<target>.dtb vmlinux + +This is based off the following patch: +https://github.com/openwrt/openwrt/commit/c063e27e02a9dcac0e7f5877fb154e58fa3e1a69 + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + arch/arm/boot/compressed/vmlinux.lds.S | 9 ++++++++- + 1 file changed, 8 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/compressed/vmlinux.lds.S ++++ b/arch/arm/boot/compressed/vmlinux.lds.S +@@ -93,6 +93,13 @@ SECTIONS + + _edata = .; + ++ .appended_dtb : { ++ /* leave space for appended DTB */ ++ . += 0x100000; ++ } ++ ++ _edata_dtb = .; ++ + /* + * The image_end section appears after any additional loadable sections + * that the linker may decide to insert in the binary image. Having +@@ -132,4 +139,4 @@ SECTIONS + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + } +-ASSERT(_edata_real == _edata, "error: zImage file size is incorrect"); ++ASSERT(_edata_real == _edata_dtb, "error: zImage file size is incorrect"); diff --git a/target/linux/ipq40xx/patches-5.10/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch b/target/linux/ipq40xx/patches-5.10/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch new file mode 100644 index 0000000000..71618a40f2 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch @@ -0,0 +1,66 @@ +From 11d6a6128a5a07c429941afc202b6e62a19771be Mon Sep 17 00:00:00 2001 +From: John Thomson <git@johnthomson.fastmail.com.au> +Date: Fri, 23 Oct 2020 19:42:36 +1000 +Subject: [PATCH 2/2] arm: compressed: set ipq40xx watchdog to allow boot + +For IPQ40XX systems where the SoC watchdog is activated before linux, +the watchdog timer may be too small for linux to finish uncompress, +boot, and watchdog management start. +If the watchdog is enabled, set the timeout for it to 30 seconds. +The functionality and offsets were copied from: +drivers/watchdog/qcom-wdt.c qcom_wdt_set_timeout & qcom_wdt_start +The watchdog memory address was taken from: +arch/arm/boot/dts/qcom-ipq4019.dtsi + +This was required on Mikrotik IPQ40XX consumer hardware using Mikrotik's +RouterBoot bootloader. + +Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> +--- + arch/arm/boot/compressed/head.S | 35 +++++++++++++++++++++++++++++++++ + 1 file changed, 35 insertions(+) + +--- a/arch/arm/boot/compressed/head.S ++++ b/arch/arm/boot/compressed/head.S +@@ -599,6 +599,41 @@ not_relocated: mov r0, #0 + bic r4, r4, #1 + blne cache_on + ++/* Set the Qualcom IPQ40xx watchdog timeout to 30 seconds ++ * if it is enabled, so that there is time for kernel ++ * to decompress, boot, and take over the watchdog. ++ * data and functionality from drivers/watchdog/qcom-wdt.c ++ * address from arch/arm/boot/dts/qcom-ipq4019.dtsi ++ */ ++#ifdef CONFIG_ARCH_IPQ40XX ++watchdog_set: ++ /* offsets: ++ * 0x04 reset (=1 resets countdown) ++ * 0x08 enable (=0 disables) ++ * 0x0c status (=1 when SoC was reset by watchdog) ++ * 0x10 bark (=timeout warning in ticks) ++ * 0x14 bite (=timeout reset in ticks) ++ * clock rate is 1<<15 hertz ++ */ ++ .equ watchdog, 0x0b017000 @Store watchdog base address ++ movw r0, #:lower16:watchdog ++ movt r0, #:upper16:watchdog ++ ldr r1, [r0, #0x08] @Get enabled? ++ cmp r1, #1 @If not enabled, do not change ++ bne watchdog_finished ++ mov r1, #0 ++ str r1, [r0, #0x08] @Disable the watchdog ++ mov r1, #1 ++ str r1, [r0, #0x04] @Pet the watchdog ++ mov r1, #30 @30 seconds timeout ++ lsl r1, r1, #15 @converted to ticks ++ str r1, [r0, #0x10] @Set the bark timeout ++ str r1, [r0, #0x14] @Set the bite timeout ++ mov r1, #1 ++ str r1, [r0, #0x08] @Enable the watchdog ++watchdog_finished: ++#endif /* CONFIG_ARCH_IPQ40XX */ ++ + /* + * The C runtime environment should now be setup sufficiently. + * Set up some pointers, and start decompressing. diff --git a/target/linux/ipq40xx/patches-5.10/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch b/target/linux/ipq40xx/patches-5.10/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch new file mode 100644 index 0000000000..e56ab6d0f1 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch @@ -0,0 +1,25 @@ +From 0e28623a11f3916c1fe5b7e789c7ab8ca932a929 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robimarko@gmail.com> +Date: Wed, 22 Jan 2020 13:02:13 +0100 +Subject: [PATCH] mmc: sdhci: sdhci-msm: use sdhci_set_clock instead of + sdhci_msm_set_clock + +When using sdhci_msm_set_clock clock setting will fail, so lets +use the generic sdhci_set_clock. + +Signed-off-by: Robert Marko <robimarko@gmail.com> +--- + drivers/mmc/host/sdhci-msm.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mmc/host/sdhci-msm.c ++++ b/drivers/mmc/host/sdhci-msm.c +@@ -1746,7 +1746,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat + + static const struct sdhci_ops sdhci_msm_ops = { + .reset = sdhci_reset, +- .set_clock = sdhci_msm_set_clock, ++ .set_clock = sdhci_set_clock, + .get_min_clock = sdhci_msm_get_min_clock, + .get_max_clock = sdhci_msm_get_max_clock, + .set_bus_width = sdhci_set_bus_width, diff --git a/target/linux/ipq40xx/patches-5.10/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-5.10/702-dts-ipq4019-add-PHY-switch-nodes.patch new file mode 100644 index 0000000000..cfbf7bd41f --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/702-dts-ipq4019-add-PHY-switch-nodes.patch @@ -0,0 +1,46 @@ +From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@gmail.com> +Date: Sun, 20 Nov 2016 02:20:54 +0100 +Subject: [PATCH] dts: ipq4019: add PHY/switch nodes + +This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii" +nodes which are needed for the ar40xx.c driver to initialize the +switch. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -616,6 +616,29 @@ + }; + }; + ++ ess-switch@c000000 { ++ compatible = "qcom,ess-switch"; ++ reg = <0xc000000 0x80000>; ++ switch_access_mode = "local bus"; ++ resets = <&gcc ESS_RESET>; ++ reset-names = "ess_rst"; ++ clocks = <&gcc GCC_ESS_CLK>; ++ clock-names = "ess_clk"; ++ switch_cpu_bmp = <0x1>; ++ switch_lan_bmp = <0x1e>; ++ switch_wan_bmp = <0x20>; ++ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */ ++ switch_initvlas = <0x7c 0x54>; ++ status = "disabled"; ++ }; ++ ++ ess-psgmii@98000 { ++ compatible = "qcom,ess-psgmii"; ++ reg = <0x98000 0x800>; ++ psgmii_access_mode = "local bus"; ++ status = "disabled"; ++ }; ++ + usb3_ss_phy: ssphy@9a000 { + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-5.10/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq40xx/patches-5.10/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch new file mode 100644 index 0000000000..167673bd11 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch @@ -0,0 +1,53 @@ +From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001 +From: Rakesh Nair <ranair@codeaurora.org> +Date: Wed, 20 Jul 2016 15:02:01 +0530 +Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in + netdev_ops + +Add callback support to get default vlan tag and register +receive flow steering filter. + +Used by IPQ4019 ess-edma driver. + +BUG=chrome-os-partner:33096 +TEST=none + +Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75 +Signed-off-by: Rakesh Nair <ranair@codeaurora.org> +Reviewed-on: https://chromium-review.googlesource.com/362203 +Commit-Ready: Grant Grundler <grundler@chromium.org> +Tested-by: Grant Grundler <grundler@chromium.org> +Reviewed-by: Grant Grundler <grundler@chromium.org> +--- + include/linux/netdevice.h | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -776,6 +776,16 @@ struct xps_map { + #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \ + - sizeof(struct xps_map)) / sizeof(u16)) + ++#ifdef CONFIG_RFS_ACCEL ++typedef int (*set_rfs_filter_callback_t)(struct net_device *dev, ++ __be32 src, ++ __be32 dst, ++ __be16 sport, ++ __be16 dport, ++ u8 proto, ++ u16 rxq_index, ++ u32 action); ++#endif + /* + * This structure holds all XPS maps for device. Maps are indexed by CPU. + */ +@@ -1379,6 +1389,9 @@ struct net_device_ops { + const struct sk_buff *skb, + u16 rxq_index, + u32 flow_id); ++ int (*ndo_register_rfs_filter)(struct net_device *dev, ++ set_rfs_filter_callback_t set_filter); ++ int (*ndo_get_default_vlan_tag)(struct net_device *net); + #endif + int (*ndo_add_slave)(struct net_device *dev, + struct net_device *slave_dev, diff --git a/target/linux/ipq40xx/patches-5.10/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-5.10/705-net-add-qualcomm-ar40xx-phy.patch new file mode 100644 index 0000000000..9adddcabc3 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/705-net-add-qualcomm-ar40xx-phy.patch @@ -0,0 +1,26 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -584,6 +584,13 @@ config XILINX_GMII2RGMII + the Reduced Gigabit Media Independent Interface(RGMII) between + Ethernet physical media devices and the Gigabit Ethernet controller. + ++config AR40XX_PHY ++ tristate "Driver for Qualcomm Atheros IPQ40XX switches" ++ depends on HAS_IOMEM && OF && OF_MDIO ++ select SWCONFIG ++ help ++ This is the driver for Qualcomm Atheros IPQ40XX ESS switches. ++ + endif # PHYLIB + + config MICREL_KS8995MA +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -69,6 +69,7 @@ ifdef CONFIG_HWMON + aquantia-objs += aquantia_hwmon.o + endif + obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o ++obj-$(CONFIG_AR40XX_PHY) += ar40xx.o + obj-$(CONFIG_AX88796B_PHY) += ax88796b.o + obj-$(CONFIG_AT803X_PHY) += at803x.o + obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o diff --git a/target/linux/ipq40xx/patches-5.10/706-dt-bindings-net-add-QCA807x-PHY.patch b/target/linux/ipq40xx/patches-5.10/706-dt-bindings-net-add-QCA807x-PHY.patch new file mode 100644 index 0000000000..dfb8d692ab --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/706-dt-bindings-net-add-QCA807x-PHY.patch @@ -0,0 +1,61 @@ +From c66863c1ba8995b61e6d727d78a241c734f5bb57 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Thu, 1 Oct 2020 15:05:35 +0200 +Subject: [PATCH] dt-bindings: net: add QCA807x PHY + +Add DT bindings for Qualcomm QCA807x PHY series. + +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +--- + include/dt-bindings/net/qcom-qca807x.h | 45 ++++++++++++++++++++++++++ + 1 file changed, 45 insertions(+) + create mode 100644 include/dt-bindings/net/qcom-qca807x.h + +--- /dev/null ++++ b/include/dt-bindings/net/qcom-qca807x.h +@@ -0,0 +1,45 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++/* ++ * Device Tree constants for the Qualcomm QCA807X PHYs ++ */ ++ ++#ifndef _DT_BINDINGS_QCOM_QCA807X_H ++#define _DT_BINDINGS_QCOM_QCA807X_H ++ ++#define PSGMII_QSGMII_TX_DRIVER_140MV 0 ++#define PSGMII_QSGMII_TX_DRIVER_160MV 1 ++#define PSGMII_QSGMII_TX_DRIVER_180MV 2 ++#define PSGMII_QSGMII_TX_DRIVER_200MV 3 ++#define PSGMII_QSGMII_TX_DRIVER_220MV 4 ++#define PSGMII_QSGMII_TX_DRIVER_240MV 5 ++#define PSGMII_QSGMII_TX_DRIVER_260MV 6 ++#define PSGMII_QSGMII_TX_DRIVER_280MV 7 ++#define PSGMII_QSGMII_TX_DRIVER_300MV 8 ++#define PSGMII_QSGMII_TX_DRIVER_320MV 9 ++#define PSGMII_QSGMII_TX_DRIVER_400MV 10 ++#define PSGMII_QSGMII_TX_DRIVER_500MV 11 ++/* Default value */ ++#define PSGMII_QSGMII_TX_DRIVER_600MV 12 ++ ++/* Full amplitude, full bias current */ ++#define QCA807X_CONTROL_DAC_FULL_VOLT_BIAS 0 ++/* Amplitude follow DSP (amplitude is adjusted based on cable length), half bias current */ ++#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS 1 ++/* Full amplitude, bias current follow DSP (bias current is adjusted based on cable length) */ ++#define QCA807X_CONTROL_DAC_FULL_VOLT_DSP_BIAS 2 ++/* Both amplitude and bias current follow DSP */ ++#define QCA807X_CONTROL_DAC_DSP_VOLT_BIAS 3 ++/* Full amplitude, half bias current */ ++#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS 4 ++/* Amplitude follow DSP setting; 1/4 bias current when cable<10m, ++ * otherwise half bias current ++ */ ++#define QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS 5 ++/* Full amplitude; same bias current setting with “010” and “011”, ++ * but half more bias is reduced when cable <10m ++ */ ++#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS_SHORT 6 ++/* Amplitude follow DSP; same bias current setting with “110”, default value */ ++#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS_SHORT 7 ++ ++#endif diff --git a/target/linux/ipq40xx/patches-5.10/707-net-phy-Add-Qualcom-QCA807x-driver.patch b/target/linux/ipq40xx/patches-5.10/707-net-phy-Add-Qualcom-QCA807x-driver.patch new file mode 100644 index 0000000000..b71b28d941 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/707-net-phy-Add-Qualcom-QCA807x-driver.patch @@ -0,0 +1,50 @@ +From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Wed, 7 Oct 2020 17:38:48 +0200 +Subject: [PATCH] net: phy: Add Qualcom QCA807x driver + +This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. + +They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. + +They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. + +Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. + +Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s. +But some vendors used these to driver generic LED-s controlled by userspace, +so lets enable registering each PHY as GPIO controller and add driver for it. + +These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. + +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +--- + drivers/net/phy/Kconfig | 6 ++++++ + drivers/net/phy/Makefile | 1 + + 2 files changed, 7 insertions(+) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -537,6 +537,12 @@ config NXP_TJA11XX_PHY + ---help--- + Currently supports the NXP TJA1100 and TJA1101 PHY. + ++config QCA807X_PHY ++ tristate "Qualcomm QCA807X PHYs" ++ depends on OF_MDIO ++ help ++ Currently supports the QCA8072 and QCA8075 models. ++ + config QSEMI_PHY + tristate "Quality Semiconductor PHYs" + ---help--- +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -103,6 +103,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc.o + obj-$(CONFIG_NATIONAL_PHY) += national.o + obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o + obj-$(CONFIG_QSEMI_PHY) += qsemi.o ++obj-$(CONFIG_QCA807X_PHY) += qca807x.o + obj-$(CONFIG_REALTEK_PHY) += realtek.o + obj-$(CONFIG_RENESAS_PHY) += uPD60620.o + obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o diff --git a/target/linux/ipq40xx/patches-5.10/708-arm-dts-ipq4019-QCA807x-properties.patch b/target/linux/ipq40xx/patches-5.10/708-arm-dts-ipq4019-QCA807x-properties.patch new file mode 100644 index 0000000000..4b04a3ce9a --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/708-arm-dts-ipq4019-QCA807x-properties.patch @@ -0,0 +1,62 @@ +From e0fa88eaa3c176b71e563da68949ac2ab45aaa61 Mon Sep 17 00:00:00 2001 +From: Robert Marko <robert.marko@sartura.hr> +Date: Fri, 2 Oct 2020 10:43:26 +0200 +Subject: [PATCH] arm: dts: ipq4019: QCA807x properties + +This adds necessary DT properties for QCA807x PHY-s to IPQ4019 DTSI. + +Signed-off-by: Robert Marko <robert.marko@sartura.hr> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -8,6 +8,7 @@ + #include <dt-bindings/clock/qcom,gcc-ipq4019.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> ++#include <dt-bindings/net/qcom-qca807x.h> + + / { + #address-cells = <1>; +@@ -597,22 +598,39 @@ + + ethphy0: ethernet-phy@0 { + reg = <0>; ++ ++ qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; ++ ++ qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; ++ ++ qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; ++ ++ qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>; + }; + + ethphy4: ethernet-phy@4 { + reg = <4>; ++ ++ qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>; ++ }; ++ ++ psgmiiphy: psgmii-phy@5 { ++ reg = <5>; ++ ++ qcom,tx-driver-strength = <PSGMII_QSGMII_TX_DRIVER_300MV>; ++ qcom,psgmii-az; + }; + }; + diff --git a/target/linux/ipq40xx/patches-5.10/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq40xx/patches-5.10/710-net-add-qualcomm-essedma-ethernet-driver.patch new file mode 100644 index 0000000000..793ce72142 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/710-net-add-qualcomm-essedma-ethernet-driver.patch @@ -0,0 +1,37 @@ +From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@googlemail.com> +Date: Thu, 19 Jan 2017 02:01:31 +0100 +Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++ + drivers/net/ethernet/qualcomm/Makefile | 1 + + 2 files changed, 10 insertions(+) + +--- a/drivers/net/ethernet/qualcomm/Kconfig ++++ b/drivers/net/ethernet/qualcomm/Kconfig +@@ -62,4 +62,14 @@ config QCOM_EMAC + + source "drivers/net/ethernet/qualcomm/rmnet/Kconfig" + ++config ESSEDMA ++ tristate "Qualcomm Atheros ESS Edma support" ++ depends on OF_MDIO ++ help ++ This driver supports ethernet edma adapter. ++ Say Y to build this driver. ++ ++ To compile this driver as a module, choose M here. The module ++ will be called essedma.ko. ++ + endif # NET_VENDOR_QUALCOMM +--- a/drivers/net/ethernet/qualcomm/Makefile ++++ b/drivers/net/ethernet/qualcomm/Makefile +@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o + qcauart-objs := qca_uart.o + + obj-y += emac/ ++obj-$(CONFIG_ESSEDMA) += essedma/ + + obj-$(CONFIG_RMNET) += rmnet/ diff --git a/target/linux/ipq40xx/patches-5.10/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-5.10/711-dts-ipq4019-add-ethernet-essedma-node.patch new file mode 100644 index 0000000000..7b2ddfe00d --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/711-dts-ipq4019-add-ethernet-essedma-node.patch @@ -0,0 +1,92 @@ +From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@gmail.com> +Date: Sun, 20 Nov 2016 01:01:10 +0100 +Subject: [PATCH] dts: ipq4019: add ethernet essedma node + +This patch adds the device-tree node for the ethernet +interfaces. + +Note: The driver isn't anywhere close to be upstream, +so the info might change. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 60 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -39,6 +39,8 @@ + spi1 = &blsp1_spi2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp1_i2c4; ++ ethernet0 = &gmac0; ++ ethernet1 = &gmac1; + }; + + cpus { +@@ -657,6 +659,64 @@ + status = "disabled"; + }; + ++ edma@c080000 { ++ compatible = "qcom,ess-edma"; ++ reg = <0xc080000 0x8000>; ++ qcom,page-mode = <0>; ++ qcom,rx_head_buf_size = <1540>; ++ qcom,mdio_supported; ++ qcom,poll_required = <1>; ++ qcom,num_gmac = <2>; ++ interrupts = <0 65 IRQ_TYPE_EDGE_RISING ++ 0 66 IRQ_TYPE_EDGE_RISING ++ 0 67 IRQ_TYPE_EDGE_RISING ++ 0 68 IRQ_TYPE_EDGE_RISING ++ 0 69 IRQ_TYPE_EDGE_RISING ++ 0 70 IRQ_TYPE_EDGE_RISING ++ 0 71 IRQ_TYPE_EDGE_RISING ++ 0 72 IRQ_TYPE_EDGE_RISING ++ 0 73 IRQ_TYPE_EDGE_RISING ++ 0 74 IRQ_TYPE_EDGE_RISING ++ 0 75 IRQ_TYPE_EDGE_RISING ++ 0 76 IRQ_TYPE_EDGE_RISING ++ 0 77 IRQ_TYPE_EDGE_RISING ++ 0 78 IRQ_TYPE_EDGE_RISING ++ 0 79 IRQ_TYPE_EDGE_RISING ++ 0 80 IRQ_TYPE_EDGE_RISING ++ 0 240 IRQ_TYPE_EDGE_RISING ++ 0 241 IRQ_TYPE_EDGE_RISING ++ 0 242 IRQ_TYPE_EDGE_RISING ++ 0 243 IRQ_TYPE_EDGE_RISING ++ 0 244 IRQ_TYPE_EDGE_RISING ++ 0 245 IRQ_TYPE_EDGE_RISING ++ 0 246 IRQ_TYPE_EDGE_RISING ++ 0 247 IRQ_TYPE_EDGE_RISING ++ 0 248 IRQ_TYPE_EDGE_RISING ++ 0 249 IRQ_TYPE_EDGE_RISING ++ 0 250 IRQ_TYPE_EDGE_RISING ++ 0 251 IRQ_TYPE_EDGE_RISING ++ 0 252 IRQ_TYPE_EDGE_RISING ++ 0 253 IRQ_TYPE_EDGE_RISING ++ 0 254 IRQ_TYPE_EDGE_RISING ++ 0 255 IRQ_TYPE_EDGE_RISING>; ++ ++ status = "disabled"; ++ ++ gmac0: gmac0 { ++ local-mac-address = [00 00 00 00 00 00]; ++ vlan_tag = <1 0x1f>; ++ }; ++ ++ gmac1: gmac1 { ++ local-mac-address = [00 00 00 00 00 00]; ++ qcom,phy_mdio_addr = <4>; ++ qcom,poll_required = <1>; ++ qcom,forced_speed = <1000>; ++ qcom,forced_duplex = <1>; ++ vlan_tag = <2 0x20>; ++ }; ++ }; ++ + usb3_ss_phy: ssphy@9a000 { + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-5.10/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-5.10/850-soc-add-qualcomm-syscon.patch new file mode 100644 index 0000000000..17e9047dfb --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/850-soc-add-qualcomm-syscon.patch @@ -0,0 +1,180 @@ +From: Christian Lamparter <chunkeey@googlemail.com> +Subject: SoC: add qualcomm syscon +--- a/drivers/soc/qcom/Makefile ++++ b/drivers/soc/qcom/Makefile +@@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o + obj-$(CONFIG_QCOM_SMSM) += smsm.o + obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o + obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o ++obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o + obj-$(CONFIG_QCOM_APR) += apr.o + obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o + obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o +--- a/drivers/soc/qcom/Kconfig ++++ b/drivers/soc/qcom/Kconfig +@@ -183,6 +183,13 @@ config QCOM_SOCINFO + Say yes here to support the Qualcomm socinfo driver, providing + information about the SoC to user space. + ++config QCOM_TCSR ++ tristate "QCOM Top Control and Status Registers" ++ depends on ARCH_QCOM ++ help ++ Say y here to enable TCSR support. The TCSR provides control ++ functions for various peripherals. ++ + config QCOM_WCNSS_CTRL + tristate "Qualcomm WCNSS control driver" + depends on ARCH_QCOM || COMPILE_TEST +--- /dev/null ++++ b/drivers/soc/qcom/qcom_tcsr.c +@@ -0,0 +1,98 @@ ++/* ++ * Copyright (c) 2014, The Linux foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License rev 2 and ++ * only rev 2 as published by the free Software foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/of_platform.h> ++#include <linux/platform_device.h> ++ ++#define TCSR_USB_PORT_SEL 0xb0 ++#define TCSR_USB_HSPHY_CONFIG 0xC ++ ++#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0 ++#define TCSR_ESS_INTERFACE_SEL_MASK 0xf ++ ++#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0 ++#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4 ++#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4 ++ ++static int tcsr_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ const struct device_node *node = pdev->dev.of_node; ++ void __iomem *base; ++ u32 val; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { ++ dev_err(&pdev->dev, "setting usb port select = %d\n", val); ++ writel(val, base + TCSR_USB_PORT_SEL); ++ } ++ ++ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) { ++ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val); ++ writel(val, base + TCSR_USB_HSPHY_CONFIG); ++ } ++ ++ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) { ++ u32 tmp = 0; ++ dev_info(&pdev->dev, "setting ess interface select = %x\n", val); ++ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET); ++ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK); ++ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK); ++ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET); ++ } ++ ++ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) { ++ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val); ++ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET); ++ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET); ++ } ++ ++ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) { ++ dev_info(&pdev->dev, ++ "setting wifi_noc_memtype_m0_m2 = %x\n", val); ++ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id tcsr_dt_match[] = { ++ { .compatible = "qcom,tcsr", }, ++ { }, ++}; ++ ++MODULE_DEVICE_TABLE(of, tcsr_dt_match); ++ ++static struct platform_driver tcsr_driver = { ++ .driver = { ++ .name = "tcsr", ++ .owner = THIS_MODULE, ++ .of_match_table = tcsr_dt_match, ++ }, ++ .probe = tcsr_probe, ++}; ++ ++module_platform_driver(tcsr_driver); ++ ++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); ++MODULE_DESCRIPTION("QCOM TCSR driver"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/include/dt-bindings/soc/qcom,tcsr.h +@@ -0,0 +1,48 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++#ifndef __DT_BINDINGS_QCOM_TCSR_H ++#define __DT_BINDINGS_QCOM_TCSR_H ++ ++#define TCSR_USB_SELECT_USB3_P0 0x1 ++#define TCSR_USB_SELECT_USB3_P1 0x2 ++#define TCSR_USB_SELECT_USB3_DUAL 0x3 ++ ++/* IPQ40xx HS PHY Mode Select */ ++#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7 ++#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7 ++ ++/* IPQ40xx ess interface mode select */ ++#define TCSR_ESS_PSGMII 0 ++#define TCSR_ESS_PSGMII_RGMII5 1 ++#define TCSR_ESS_PSGMII_RMII0 2 ++#define TCSR_ESS_PSGMII_RMII1 4 ++#define TCSR_ESS_PSGMII_RMII0_RMII1 6 ++#define TCSR_ESS_PSGMII_RGMII4 9 ++ ++/* ++ * IPQ40xx WiFi Global Config ++ * Bit 30:AXID_EN ++ * Enable AXI master bus Axid translating to confirm all txn submitted by order ++ * Bit 24: Use locally generated socslv_wxi_bvalid ++ * 1: use locally generate socslv_wxi_bvalid for performance. ++ * 0: use SNOC socslv_wxi_bvalid. ++ */ ++#define TCSR_WIFI_GLB_CFG 0x41000000 ++ ++/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */ ++#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222 ++ ++/* TCSR A/B REG */ ++#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 ++#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 ++ ++#endif diff --git a/target/linux/ipq40xx/patches-5.10/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-5.10/900-dts-ipq4019-ap-dk01.1.patch new file mode 100644 index 0000000000..5a245eb431 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/900-dts-ipq4019-ap-dk01.1.patch @@ -0,0 +1,176 @@ +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +@@ -15,6 +15,7 @@ + */ + + #include "qcom-ipq4019.dtsi" ++#include <dt-bindings/soc/qcom,tcsr.h> + + / { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; +@@ -29,6 +30,32 @@ + }; + + soc { ++ tcsr@194b000 { ++ /* select hostmode */ ++ compatible = "qcom,tcsr"; ++ reg = <0x194b000 0x100>; ++ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; ++ status = "okay"; ++ }; ++ ++ ess_tcsr@1953000 { ++ compatible = "qcom,tcsr"; ++ reg = <0x1953000 0x1000>; ++ qcom,ess-interface-select = <TCSR_ESS_PSGMII>; ++ }; ++ ++ tcsr@1949000 { ++ compatible = "qcom,tcsr"; ++ reg = <0x1949000 0x100>; ++ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; ++ }; ++ ++ tcsr@1957000 { ++ compatible = "qcom,tcsr"; ++ reg = <0x1957000 0x100>; ++ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; ++ }; ++ + rng@22000 { + status = "ok"; + }; +@@ -74,14 +101,6 @@ + pinctrl-names = "default"; + status = "ok"; + cs-gpios = <&tlmm 54 0>; +- +- mx25l25635e@0 { +- #address-cells = <1>; +- #size-cells = <1>; +- reg = <0>; +- compatible = "mx25l25635e"; +- spi-max-frequency = <24000000>; +- }; + }; + + serial@78af000 { +@@ -109,5 +128,41 @@ + wifi@a800000 { + status = "ok"; + }; ++ ++ mdio@90000 { ++ status = "okay"; ++ }; ++ ++ ess-switch@c000000 { ++ status = "okay"; ++ }; ++ ++ ess-psgmii@98000 { ++ status = "okay"; ++ }; ++ ++ edma@c080000 { ++ status = "okay"; ++ }; ++ ++ usb3_ss_phy: ssphy@9a000 { ++ status = "okay"; ++ }; ++ ++ usb3_hs_phy: hsphy@a6000 { ++ status = "okay"; ++ }; ++ ++ usb3: usb3@8af8800 { ++ status = "okay"; ++ }; ++ ++ usb2_hs_phy: hsphy@a8000 { ++ status = "okay"; ++ }; ++ ++ usb2: usb2@60f8800 { ++ status = "okay"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +@@ -18,5 +18,73 @@ + + / { + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; ++ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1"; + ++ memory { ++ device_type = "memory"; ++ reg = <0x80000000 0x10000000>; ++ }; ++}; ++ ++&blsp1_spi1 { ++ mx25l25635f@0 { ++ compatible = "mx25l25635f", "jedec,spi-nor"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0>; ++ spi-max-frequency = <24000000>; ++ ++ SBL1@0 { ++ label = "SBL1"; ++ reg = <0x0 0x40000>; ++ read-only; ++ }; ++ MIBIB@40000 { ++ label = "MIBIB"; ++ reg = <0x40000 0x20000>; ++ read-only; ++ }; ++ QSEE@60000 { ++ label = "QSEE"; ++ reg = <0x60000 0x60000>; ++ read-only; ++ }; ++ CDT@c0000 { ++ label = "CDT"; ++ reg = <0xc0000 0x10000>; ++ read-only; ++ }; ++ DDRPARAMS@d0000 { ++ label = "DDRPARAMS"; ++ reg = <0xd0000 0x10000>; ++ read-only; ++ }; ++ APPSBLENV@e0000 { ++ label = "APPSBLENV"; ++ reg = <0xe0000 0x10000>; ++ read-only; ++ }; ++ APPSBL@f0000 { ++ label = "APPSBL"; ++ reg = <0xf0000 0x80000>; ++ read-only; ++ }; ++ ART@170000 { ++ label = "ART"; ++ reg = <0x170000 0x10000>; ++ read-only; ++ }; ++ kernel@180000 { ++ label = "kernel"; ++ reg = <0x180000 0x400000>; ++ }; ++ rootfs@580000 { ++ label = "rootfs"; ++ reg = <0x580000 0x1600000>; ++ }; ++ firmware@180000 { ++ label = "firmware"; ++ reg = <0x180000 0x1a00000>; ++ }; ++ }; + }; diff --git a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch new file mode 100644 index 0000000000..0447fb6012 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch @@ -0,0 +1,74 @@ +From a10fab12a927e60b7141a602e740d70cb4d09e4a Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Thu, 9 Mar 2017 11:03:18 +0100 +Subject: [PATCH] arm: boot: add dts files + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/arm/boot/dts/Makefile | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -837,11 +837,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8074-dragonboard.dtb \ + qcom-apq8084-ifc6540.dtb \ + qcom-apq8084-mtp.dtb \ ++ qcom-ipq4018-a42.dtb \ ++ qcom-ipq4018-ap120c-ac.dtb \ ++ qcom-ipq4018-dap-2610.dtb \ ++ qcom-ipq4018-cs-w3-wd1200g-eup.dtb \ ++ qcom-ipq4018-magic-2-wifi-next.dtb \ ++ qcom-ipq4018-ea6350v3.dtb \ ++ qcom-ipq4018-eap1300.dtb \ ++ qcom-ipq4018-ecw5211.dtb \ ++ qcom-ipq4018-emd1.dtb \ ++ qcom-ipq4018-emr3500.dtb \ ++ qcom-ipq4018-ens620ext.dtb \ ++ qcom-ipq4018-ex6100v2.dtb \ ++ qcom-ipq4018-ex6150v2.dtb \ ++ qcom-ipq4018-fritzbox-4040.dtb \ ++ qcom-ipq4018-gl-ap1300.dtb \ ++ qcom-ipq4018-jalapeno.dtb \ ++ qcom-ipq4018-meshpoint-one.dtb \ ++ qcom-ipq4018-hap-ac2.dtb \ ++ qcom-ipq4018-sxtsq-5-ac.dtb \ ++ qcom-ipq4018-nbg6617.dtb \ ++ qcom-ipq4019-oap100.dtb \ ++ qcom-ipq4018-pa1200.dtb \ ++ qcom-ipq4018-rt-ac58u.dtb \ ++ qcom-ipq4018-wac510.dtb \ ++ qcom-ipq4018-wre6606.dtb \ ++ qcom-ipq4018-wrtq-329acn.dtb \ + qcom-ipq4019-ap.dk01.1-c1.dtb \ + qcom-ipq4019-ap.dk04.1-c1.dtb \ + qcom-ipq4019-ap.dk04.1-c3.dtb \ + qcom-ipq4019-ap.dk07.1-c1.dtb \ + qcom-ipq4019-ap.dk07.1-c2.dtb \ ++ qcom-ipq4019-a62.dtb \ ++ qcom-ipq4019-cm520-79f.dtb \ ++ qcom-ipq4019-ea8300.dtb \ ++ qcom-ipq4019-eap2200.dtb \ ++ qcom-ipq4019-fritzbox-7530.dtb \ ++ qcom-ipq4019-fritzrepeater-1200.dtb \ ++ qcom-ipq4019-fritzrepeater-3000.dtb \ ++ qcom-ipq4019-map-ac2200.dtb \ ++ qcom-ipq4019-mr8300.dtb \ ++ qcom-ipq4019-e2600ac-c1.dtb \ ++ qcom-ipq4019-e2600ac-c2.dtb \ ++ qcom-ipq4019-habanero-dvk.dtb \ ++ qcom-ipq4019-pa2200.dtb \ ++ qcom-ipq4019-rtl30vw.dtb \ ++ qcom-ipq4019-u4019-32m.dtb \ ++ qcom-ipq4019-wpj419.dtb \ ++ qcom-ipq4019-wtr-m2133hp.dtb \ ++ qcom-ipq4028-wpj428.dtb \ ++ qcom-ipq4029-ap-303.dtb \ ++ qcom-ipq4029-ap-303h.dtb \ ++ qcom-ipq4029-ap-365.dtb \ ++ qcom-ipq4029-gl-b1300.dtb \ ++ qcom-ipq4029-gl-s1300.dtb \ ++ qcom-ipq4029-mr33.dtb \ + qcom-ipq8064-ap148.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ diff --git a/target/linux/ipq40xx/patches-5.10/902-dts-ipq4019-ap-dk04.1.patch b/target/linux/ipq40xx/patches-5.10/902-dts-ipq4019-ap-dk04.1.patch new file mode 100644 index 0000000000..ca32144846 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/902-dts-ipq4019-ap-dk04.1.patch @@ -0,0 +1,167 @@ +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +@@ -17,53 +17,79 @@ + stdout-path = "serial0:115200n8"; + }; + +- memory { +- device_type = "memory"; +- reg = <0x80000000 0x10000000>; /* 256MB */ +- }; +- + soc { ++ rng@22000 { ++ status = "okay"; ++ }; ++ + pinctrl@1000000 { + serial_0_pins: serial0-pinmux { +- pins = "gpio16", "gpio17"; +- function = "blsp_uart0"; +- bias-disable; ++ mux { ++ pins = "gpio16", "gpio17"; ++ function = "blsp_uart0"; ++ bias-disable; ++ }; + }; + + serial_1_pins: serial1-pinmux { +- pins = "gpio8", "gpio9", +- "gpio10", "gpio11"; +- function = "blsp_uart1"; +- bias-disable; ++ mux { ++ pins = "gpio8", "gpio9"; ++ function = "blsp_uart1"; ++ bias-disable; ++ }; + }; + + spi_0_pins: spi-0-pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; +- bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; ++ }; ++ pinconf { ++ pins = "gpio13", "gpio14", "gpio15"; ++ drive-strength = <12>; ++ bias-disable; ++ }; ++ pinconf_cs { ++ pins = "gpio12"; ++ drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c-0-pinmux { +- pins = "gpio20", "gpio21"; +- function = "blsp_i2c0"; +- bias-disable; ++ pinmux { ++ function = "blsp_i2c0"; ++ pins = "gpio10", "gpio11"; ++ }; ++ pinconf { ++ pins = "gpio10", "gpio11"; ++ drive-strength = <16>; ++ bias-disable; ++ }; + }; + + nand_pins: nand-pins { +- pins = "gpio53", "gpio55", "gpio56", +- "gpio57", "gpio58", "gpio59", +- "gpio60", "gpio62", "gpio63", +- "gpio64", "gpio65", "gpio66", +- "gpio67", "gpio68", "gpio69"; +- function = "qpic"; ++ pullups { ++ pins = "gpio52", "gpio53", "gpio58", ++ "gpio59"; ++ function = "qpic"; ++ bias-pull-up; ++ }; ++ ++ pulldowns { ++ pins = "gpio54", "gpio55", "gpio56", ++ "gpio57", "gpio60", "gpio61", ++ "gpio62", "gpio63", "gpio64", ++ "gpio65", "gpio66", "gpio67", ++ "gpio68", "gpio69"; ++ function = "qpic"; ++ bias-pull-down; ++ }; + }; + }; + +@@ -89,11 +115,11 @@ + status = "ok"; + cs-gpios = <&tlmm 12 0>; + +- m25p80@0 { ++ mx25l25635e@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; +- compatible = "n25q128a11"; ++ compatible = "mx25l25635e"; + spi-max-frequency = <24000000>; + }; + }; +@@ -103,9 +129,48 @@ + perst-gpio = <&tlmm 38 0x1>; + }; + ++ i2c0: i2c@78b7000 { /* BLSP1 QUP2 */ ++ pinctrl-0 = <&i2c_0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++ }; ++ + qpic-nand@79b0000 { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + }; ++ ++ usb3_ss_phy: ssphy@9a000 { ++ status = "okay"; ++ }; ++ ++ usb3_hs_phy: hsphy@a6000 { ++ status = "okay"; ++ }; ++ ++ usb3: usb3@8af8800 { ++ status = "okay"; ++ }; ++ ++ usb2_hs_phy: hsphy@a8000 { ++ status = "okay"; ++ }; ++ ++ usb2: usb2@60f8800 { ++ status = "okay"; ++ }; ++ ++ cryptobam: dma@8e04000 { ++ status = "okay"; ++ }; ++ ++ crypto@8e3a000 { ++ status = "okay"; ++ }; ++ ++ watchdog@b017000 { ++ status = "okay"; ++ }; + }; + }; diff --git a/target/linux/ipq40xx/patches-5.10/997-device_tree_cmdline.patch b/target/linux/ipq40xx/patches-5.10/997-device_tree_cmdline.patch new file mode 100644 index 0000000000..3cc032fdd2 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/997-device_tree_cmdline.patch @@ -0,0 +1,12 @@ +--- a/drivers/of/fdt.c ++++ b/drivers/of/fdt.c +@@ -1059,6 +1059,9 @@ int __init early_init_dt_scan_chosen(uns + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); ++ p = of_get_flat_dt_prop(node, "bootargs-append", &l); ++ if (p != NULL && l > 0) ++ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); + + /* + * CONFIG_CMDLINE is meant to be a default in case nothing else |