diff options
Diffstat (limited to 'target')
13 files changed, 2102 insertions, 0 deletions
diff --git a/target/linux/apm821xx/Makefile b/target/linux/apm821xx/Makefile index b74dc177a8..9ba623535e 100644 --- a/target/linux/apm821xx/Makefile +++ b/target/linux/apm821xx/Makefile @@ -14,6 +14,7 @@ MAINTAINER:=Chris Blake <chrisrblake93@gmail.com>, \ SUBTARGETS:=nand sata KERNEL_PATCHVER:=4.19 +KERNEL_TESTING_PATCHVER:=5.4 define Target/Description Build images for AppliedMicro APM821xx based boards. diff --git a/target/linux/apm821xx/config-5.4 b/target/linux/apm821xx/config-5.4 new file mode 100644 index 0000000000..9fd470043d --- /dev/null +++ b/target/linux/apm821xx/config-5.4 @@ -0,0 +1,437 @@ +# CONFIG_40x is not set +CONFIG_44x=y +CONFIG_460EX=y +CONFIG_4xx=y +CONFIG_4xx_SOC=y +CONFIG_64BIT_TIME=y +# CONFIG_ADIN_PHY is not set +# CONFIG_ADVANCED_OPTIONS is not set +# CONFIG_AL_FIC is not set +CONFIG_APM821xx=y +CONFIG_APOLLO3G=y +# CONFIG_ARCHES is not set +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y +CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_ARCH_HAS_KCOV=y +CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y +CONFIG_ARCH_HAS_PHYS_TO_DMA=y +CONFIG_ARCH_HAS_PMEM_API=y +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y +CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_MMAP_RND_BITS=11 +CONFIG_ARCH_MMAP_RND_BITS_MAX=17 +CONFIG_ARCH_MMAP_RND_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y +CONFIG_AUDIT_ARCH=y +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set +# CONFIG_BAMBOO is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_PM=y +CONFIG_BLUESTONE=y +CONFIG_BOOKE=y +CONFIG_BOOKE_WDT=y +# CONFIG_CANYONLANDS is not set +CONFIG_CC_CAN_LINK=y +CONFIG_CC_HAS_ASM_INLINE=y +CONFIG_CC_HAS_KASAN_GENERIC=y +CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs noinitrd" +CONFIG_CMDLINE_BOOL=y +CONFIG_COMPAT_32BIT_TIME=y +# CONFIG_COUNTER is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CRC16=y +# CONFIG_CRC32_SARWATE is not set +CONFIG_CRC32_SLICEBY8=y +CONFIG_CRYPTO_ACOMP2=y +# CONFIG_CRYPTO_ADIANTUM is not set +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_CCM=y +CONFIG_CRYPTO_CFB=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set +CONFIG_CRYPTO_DEV_PPC4XX=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_ECRDSA is not set +CONFIG_CRYPTO_ESSIV=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_GHASH=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_LIB_AES=y +CONFIG_CRYPTO_LIB_SHA256=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_MD5_PPC=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_OFB=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_SEQIV=y +CONFIG_CRYPTO_SHA1_PPC=y +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_STREEBOG is not set +# CONFIG_CRYPTO_XXHASH is not set +CONFIG_DATA_SHIFT=12 +CONFIG_DEBUG_MISC=y +# CONFIG_DEBUG_PLIST is not set +CONFIG_DMA_DECLARE_COHERENT=y +CONFIG_DMA_DIRECT_REMAP=y +CONFIG_DMA_REMAP=y +CONFIG_DTC=y +# CONFIG_E200 is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_EBONY is not set +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +# CONFIG_EEPROM_EE1004 is not set +# CONFIG_EIGER is not set +CONFIG_ETEXT_SHIFT=12 +# CONFIG_EXFAT_FS is not set +CONFIG_EXTRA_TARGETS="uImage" +# CONFIG_FIELDBUS_DEV is not set +CONFIG_FIXED_PHY=y +CONFIG_FORCE_PCI=y +CONFIG_FREEZER=y +# CONFIG_FSL_LBC is not set +# CONFIG_FS_VERITY is not set +# CONFIG_FW_LOADER_COMPRESS is not set +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GCC_PLUGINS=y +# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set +# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set +# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set +# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set +# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set +# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +# CONFIG_GEN_RTC is not set +# CONFIG_GLACIER is not set +CONFIG_GPIOLIB=y +# CONFIG_GPIO_AMD_FCH is not set +# CONFIG_GPIO_CADENCE is not set +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GW_PLD is not set +CONFIG_GPIO_SYSFS=y +# CONFIG_GVE is not set +# CONFIG_HABANA_AI is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KASAN=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_NVRAM_OPS=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ASM_MODVERSIONS=y +CONFIG_HAVE_CBPF_JIT=y +CONFIG_HAVE_COPY_THREAD_TLS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FAST_GUP=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KPROBES_ON_FTRACE=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MMU_GATHER_PAGE_SIZE=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PCI=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y +# CONFIG_HEADERS_INSTALL is not set +# CONFIG_HEADER_TEST is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_PPC4XX=y +CONFIG_HZ=1000 +# CONFIG_HZ_100 is not set +CONFIG_HZ_1000=y +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_NVIDIA_GPU is not set +# CONFIG_I3C is not set +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_EMAC4=y +CONFIG_IBM_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_EMAC_RGMII=y +CONFIG_IBM_EMAC_RXB=128 +CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_EMAC_TAH=y +CONFIG_IBM_EMAC_TXB=128 +# CONFIG_ICON is not set +# CONFIG_IGC is not set +# CONFIG_IKHEADERS is not set +CONFIG_ILLEGAL_POINTER_VALUE=0 +# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set +# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set +CONFIG_INIT_STACK_NONE=y +# CONFIG_INTERCONNECT is not set +# CONFIG_IO_URING is not set +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_ISA_DMA_API=y +# CONFIG_JFFS2_FS is not set +CONFIG_KASAN_STACK=1 +# CONFIG_KATMAI is not set +CONFIG_KERNEL_START=0xc0000000 +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_LEDS_AN30259A is not set +# CONFIG_LEDS_LM3532 is not set +# CONFIG_LEDS_TRIGGER_AUDIO is not set +CONFIG_LEDS_TRIGGER_MTD=y +CONFIG_LEDS_TRIGGER_PATTERN=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_LOCK_EVENT_COUNTS is not set +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity" +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +# CONFIG_MATH_EMULATION is not set +CONFIG_MDIO_BUS=y +# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set +CONFIG_MDIO_DEVICE=y +CONFIG_MEMFD_CREATE=y +# CONFIG_MFD_LOCHNAGAR is not set +# CONFIG_MFD_MAX77650 is not set +# CONFIG_MFD_ROHM_BD70528 is not set +# CONFIG_MFD_STMFX is not set +# CONFIG_MFD_STPMIC1 is not set +# CONFIG_MFD_TQMX86 is not set +CONFIG_MIGRATION=y +# CONFIG_MISC_ALCOR_PCI is not set +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_GEOMETRY is not set +# CONFIG_MTD_HYPERBUS is not set +# CONFIG_MTD_RAW_NAND is not set +# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NEED_SG_DMA_LENGTH=y +# CONFIG_NET_SCH_TAPRIO is not set +CONFIG_NET_VENDOR_GOOGLE=y +CONFIG_NET_VENDOR_PENSANDO=y +# CONFIG_NI_XGE_MANAGEMENT_ENET is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_NR_IRQS=512 +# CONFIG_NULL_TTY is not set +CONFIG_NVMEM=y +CONFIG_NVMEM_SYSFS=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND=y +# CONFIG_OVERLAY_FS_XINO_AUTO is not set +CONFIG_PACKING=y +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +# CONFIG_PCIE_BW is not set +CONFIG_PCIE_PME=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_MSI=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYS_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y +# CONFIG_PHY_CADENCE_DP is not set +# CONFIG_PHY_CADENCE_DPHY is not set +# CONFIG_PHY_FSL_IMX8MQ_USB is not set +# CONFIG_PHY_MIXEL_MIPI_DPHY is not set +CONFIG_PLUGIN_HOSTCC="g++" +CONFIG_PM=y +CONFIG_PM_AUTOSLEEP=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_WAKELOCKS=y +CONFIG_PM_WAKELOCKS_GC=y +CONFIG_PM_WAKELOCKS_LIMIT=100 +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_PPC44x_SIMPLE=y +CONFIG_PPC4xx_CPM=y +CONFIG_PPC4xx_GPIO=y +CONFIG_PPC4xx_MSI=y +CONFIG_PPC4xx_PCI_EXPRESS=y +# CONFIG_PPC64 is not set +# CONFIG_PPC_47x is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y +CONFIG_PPC_ADV_DEBUG_DVCS=2 +CONFIG_PPC_ADV_DEBUG_IACS=4 +CONFIG_PPC_ADV_DEBUG_REGS=y +# CONFIG_PPC_BOOK3S_601 is not set +# CONFIG_PPC_BOOK3S_6xx is not set +CONFIG_PPC_DCR=y +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_EARLY_DEBUG is not set +CONFIG_PPC_FPU=y +CONFIG_PPC_INDIRECT_PCI=y +# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y +CONFIG_PPC_MSI_BITMAP=y +CONFIG_PPC_PAGE_SHIFT=12 +# CONFIG_PPC_PTDUMP is not set +CONFIG_PPC_UDBG_16550=y +CONFIG_PPC_WERROR=y +# CONFIG_PRINTK_CALLER is not set +# CONFIG_PSI is not set +CONFIG_PTE_64BIT=y +# CONFIG_PVPANIC is not set +# CONFIG_RAINIER is not set +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set +CONFIG_RAS=y +# CONFIG_REED_SOLOMON_TEST is not set +CONFIG_RSEQ=y +# CONFIG_SAM440EP is not set +# CONFIG_SCOM_DEBUGFS is not set +# CONFIG_SEQUOIA is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_FSL_LINFLEXUART is not set +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_SIFIVE is not set +CONFIG_SGL_ALLOC=y +# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set +CONFIG_SIMPLE_GPIO=y +CONFIG_SPARSE_IRQ=y +CONFIG_SRCU=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +# CONFIG_TAISHAN is not set +CONFIG_TASK_SIZE=0xc0000000 +# CONFIG_TEST_BLACKHOLE_DEV is not set +# CONFIG_TEST_MEMCAT_P is not set +# CONFIG_TEST_MEMINIT is not set +# CONFIG_TEST_STACKINIT is not set +# CONFIG_TEST_STRSCPY is not set +# CONFIG_TEST_VMALLOC is not set +# CONFIG_TEST_XARRAY is not set +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_THREAD_SHIFT=13 +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TINY_SRCU=y +# CONFIG_TI_CPSW_PHY_SEL is not set +CONFIG_UBSAN_ALIGNMENT=y +# CONFIG_UNICODE is not set +CONFIG_UNIX_SCM=y +# CONFIG_USB_CONN_GPIO is not set +CONFIG_USB_SUPPORT=y +# CONFIG_VALIDATE_FS_PARSER is not set +CONFIG_VDSO32=y +# CONFIG_VIRTIO_MENU is not set +# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set +# CONFIG_WARP is not set +CONFIG_WATCHDOG_CORE=y +CONFIG_WATCHDOG_OPEN_TIMEOUT=0 +# CONFIG_WNDR4700 is not set +# CONFIG_XILINX_SDFEC is not set +# CONFIG_XILINX_SYSACE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_XZ_DEC_BCJ=y +CONFIG_XZ_DEC_POWERPC=y +# CONFIG_YOSEMITE is not set +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/apm821xx/patches-5.4/111-crypto-crypto4xx-reduce-memory-fragmentation.patch b/target/linux/apm821xx/patches-5.4/111-crypto-crypto4xx-reduce-memory-fragmentation.patch new file mode 100644 index 0000000000..72f8825cb7 --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/111-crypto-crypto4xx-reduce-memory-fragmentation.patch @@ -0,0 +1,103 @@ +From 3913dbe4b3256ead342572f7aba726a60ab5fd43 Mon Sep 17 00:00:00 2001 +Message-Id: <3913dbe4b3256ead342572f7aba726a60ab5fd43.1577917078.git.chunkeey@gmail.com> +From: Christian Lamparter <chunkeey@gmail.com> +Date: Wed, 1 Jan 2020 22:28:28 +0100 +Subject: [PATCH 1/2] crypto: crypto4xx - reduce memory fragmentation +To: linux-crypto@vger.kernel.org +Cc: Herbert Xu <herbert@gondor.apana.org.au> + +With recent kernels (>5.2), the driver fails to probe, as the +allocation of the driver's scatter buffer fails with -ENOMEM. + +This happens in crypto4xx_build_sdr(). Where the driver tries +to get 512KiB (=PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD) of +continuous memory. This big chunk is by design, since the driver +uses this circumstance in the crypto4xx_copy_pkt_to_dst() to +its advantage: +"all scatter-buffers are all neatly organized in one big +continuous ringbuffer; So scatterwalk_map_and_copy() can be +instructed to copy a range of buffers in one go." + +The PowerPC arch does not have support for DMA_CMA. Hence, +this patch reorganizes the order in which the memory +allocations are done. Since the driver itself is responsible +for some of the issues. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + drivers/crypto/amcc/crypto4xx_core.c | 27 +++++++++++++-------------- + 1 file changed, 13 insertions(+), 14 deletions(-) + +diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c +index 7d6b695c4ab3..3ce5f0a24cbc 100644 +--- a/drivers/crypto/amcc/crypto4xx_core.c ++++ b/drivers/crypto/amcc/crypto4xx_core.c +@@ -286,7 +286,8 @@ static u32 crypto4xx_build_gdr(struct crypto4xx_device *dev) + + static inline void crypto4xx_destroy_gdr(struct crypto4xx_device *dev) + { +- dma_free_coherent(dev->core_dev->device, ++ if (dev->gdr) ++ dma_free_coherent(dev->core_dev->device, + sizeof(struct ce_gd) * PPC4XX_NUM_GD, + dev->gdr, dev->gdr_pa); + } +@@ -354,13 +355,6 @@ static u32 crypto4xx_build_sdr(struct crypto4xx_device *dev) + { + int i; + +- /* alloc memory for scatter descriptor ring */ +- dev->sdr = dma_alloc_coherent(dev->core_dev->device, +- sizeof(struct ce_sd) * PPC4XX_NUM_SD, +- &dev->sdr_pa, GFP_ATOMIC); +- if (!dev->sdr) +- return -ENOMEM; +- + dev->scatter_buffer_va = + dma_alloc_coherent(dev->core_dev->device, + PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD, +@@ -368,6 +362,13 @@ static u32 crypto4xx_build_sdr(struct crypto4xx_device *dev) + if (!dev->scatter_buffer_va) + return -ENOMEM; + ++ /* alloc memory for scatter descriptor ring */ ++ dev->sdr = dma_alloc_coherent(dev->core_dev->device, ++ sizeof(struct ce_sd) * PPC4XX_NUM_SD, ++ &dev->sdr_pa, GFP_ATOMIC); ++ if (!dev->sdr) ++ return -ENOMEM; ++ + for (i = 0; i < PPC4XX_NUM_SD; i++) { + dev->sdr[i].ptr = dev->scatter_buffer_pa + + PPC4XX_SD_BUFFER_SIZE * i; +@@ -1439,15 +1440,14 @@ static int crypto4xx_probe(struct platform_device *ofdev) + spin_lock_init(&core_dev->lock); + INIT_LIST_HEAD(&core_dev->dev->alg_list); + ratelimit_default_init(&core_dev->dev->aead_ratelimit); ++ rc = crypto4xx_build_sdr(core_dev->dev); ++ if (rc) ++ goto err_build_sdr; + rc = crypto4xx_build_pdr(core_dev->dev); + if (rc) +- goto err_build_pdr; ++ goto err_build_sdr; + + rc = crypto4xx_build_gdr(core_dev->dev); +- if (rc) +- goto err_build_pdr; +- +- rc = crypto4xx_build_sdr(core_dev->dev); + if (rc) + goto err_build_sdr; + +@@ -1493,7 +1493,6 @@ static int crypto4xx_probe(struct platform_device *ofdev) + err_build_sdr: + crypto4xx_destroy_sdr(core_dev->dev); + crypto4xx_destroy_gdr(core_dev->dev); +-err_build_pdr: + crypto4xx_destroy_pdr(core_dev->dev); + kfree(core_dev->dev); + err_alloc_dev: +-- +2.25.0.rc0 + diff --git a/target/linux/apm821xx/patches-5.4/112-crypto-crypto4xx-use-GFP_KERNEL-for-big-allocations.patch b/target/linux/apm821xx/patches-5.4/112-crypto-crypto4xx-use-GFP_KERNEL-for-big-allocations.patch new file mode 100644 index 0000000000..4fc988c1ec --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/112-crypto-crypto4xx-use-GFP_KERNEL-for-big-allocations.patch @@ -0,0 +1,77 @@ +From 5bacaaea8a228bc46f402595b1694ef9128f3599 Mon Sep 17 00:00:00 2001 +Message-Id: <5bacaaea8a228bc46f402595b1694ef9128f3599.1577917078.git.chunkeey@gmail.com> +In-Reply-To: <3913dbe4b3256ead342572f7aba726a60ab5fd43.1577917078.git.chunkeey@gmail.com> +References: <3913dbe4b3256ead342572f7aba726a60ab5fd43.1577917078.git.chunkeey@gmail.com> +From: Christian Lamparter <chunkeey@gmail.com> +Date: Wed, 1 Jan 2020 22:54:54 +0100 +Subject: [PATCH 2/2] crypto: crypto4xx - use GFP_KERNEL for big allocations +To: linux-crypto@vger.kernel.org +Cc: Herbert Xu <herbert@gondor.apana.org.au> + +The driver should use GFP_KERNEL for the bigger allocation +during the driver's crypto4xx_probe() and not GFP_ATOMIC in +my opinion. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + drivers/crypto/amcc/crypto4xx_core.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c +index 3ce5f0a24cbc..981de43ea5e2 100644 +--- a/drivers/crypto/amcc/crypto4xx_core.c ++++ b/drivers/crypto/amcc/crypto4xx_core.c +@@ -169,7 +169,7 @@ static u32 crypto4xx_build_pdr(struct crypto4xx_device *dev) + int i; + dev->pdr = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct ce_pd) * PPC4XX_NUM_PD, +- &dev->pdr_pa, GFP_ATOMIC); ++ &dev->pdr_pa, GFP_KERNEL); + if (!dev->pdr) + return -ENOMEM; + +@@ -185,13 +185,13 @@ static u32 crypto4xx_build_pdr(struct crypto4xx_device *dev) + dev->shadow_sa_pool = dma_alloc_coherent(dev->core_dev->device, + sizeof(union shadow_sa_buf) * PPC4XX_NUM_PD, + &dev->shadow_sa_pool_pa, +- GFP_ATOMIC); ++ GFP_KERNEL); + if (!dev->shadow_sa_pool) + return -ENOMEM; + + dev->shadow_sr_pool = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct sa_state_record) * PPC4XX_NUM_PD, +- &dev->shadow_sr_pool_pa, GFP_ATOMIC); ++ &dev->shadow_sr_pool_pa, GFP_KERNEL); + if (!dev->shadow_sr_pool) + return -ENOMEM; + for (i = 0; i < PPC4XX_NUM_PD; i++) { +@@ -277,7 +277,7 @@ static u32 crypto4xx_build_gdr(struct crypto4xx_device *dev) + { + dev->gdr = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct ce_gd) * PPC4XX_NUM_GD, +- &dev->gdr_pa, GFP_ATOMIC); ++ &dev->gdr_pa, GFP_KERNEL); + if (!dev->gdr) + return -ENOMEM; + +@@ -358,14 +358,14 @@ static u32 crypto4xx_build_sdr(struct crypto4xx_device *dev) + dev->scatter_buffer_va = + dma_alloc_coherent(dev->core_dev->device, + PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD, +- &dev->scatter_buffer_pa, GFP_ATOMIC); ++ &dev->scatter_buffer_pa, GFP_KERNEL); + if (!dev->scatter_buffer_va) + return -ENOMEM; + + /* alloc memory for scatter descriptor ring */ + dev->sdr = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct ce_sd) * PPC4XX_NUM_SD, +- &dev->sdr_pa, GFP_ATOMIC); ++ &dev->sdr_pa, GFP_KERNEL); + if (!dev->sdr) + return -ENOMEM; + +-- +2.25.0.rc0 + diff --git a/target/linux/apm821xx/patches-5.4/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-5.4/201-add-amcc-apollo3g-support.patch new file mode 100644 index 0000000000..18f4c72de8 --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/201-add-amcc-apollo3g-support.patch @@ -0,0 +1,30 @@ +--- a/arch/powerpc/platforms/44x/Kconfig ++++ b/arch/powerpc/platforms/44x/Kconfig +@@ -131,6 +131,17 @@ config CANYONLANDS + help + This option enables support for the AMCC PPC460EX evaluation board. + ++config APOLLO3G ++ bool "Apollo3G" ++ depends on 44x ++ default n ++ select PPC44x_SIMPLE ++ select APM821xx ++ select IBM_EMAC_RGMII ++ select 460EX ++ help ++ This option enables support for the AMCC Apollo 3G board. ++ + config GLACIER + bool "Glacier" + depends on 44x +--- a/arch/powerpc/platforms/44x/ppc44x_simple.c ++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c +@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p + * board.c file for it rather than adding it to this list. + */ + static char *board[] __initdata = { ++ "amcc,apollo3g", + "amcc,arches", + "amcc,bamboo", + "apm,bluestone", diff --git a/target/linux/apm821xx/patches-5.4/202-add-netgear-wndr4700-support.patch b/target/linux/apm821xx/patches-5.4/202-add-netgear-wndr4700-support.patch new file mode 100644 index 0000000000..536a74ef00 --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/202-add-netgear-wndr4700-support.patch @@ -0,0 +1,32 @@ +--- a/arch/powerpc/platforms/44x/Makefile ++++ b/arch/powerpc/platforms/44x/Makefile +@@ -4,6 +4,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y) + obj-y += idle.o + endif + obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o ++obj-$(CONFIG_WNDR4700) += wndr4700.o + obj-$(CONFIG_EBONY) += ebony.o + obj-$(CONFIG_SAM440EP) += sam440ep.o + obj-$(CONFIG_WARP) += warp.o +--- a/arch/powerpc/platforms/44x/Kconfig ++++ b/arch/powerpc/platforms/44x/Kconfig +@@ -260,6 +260,19 @@ config ICON + help + This option enables support for the AMCC PPC440SPe evaluation board. + ++config WNDR4700 ++ bool "WNDR4700" ++ depends on 44x ++ default n ++ select APM821xx ++ select PCI_MSI ++ select PPC4xx_MSI ++ select PPC4xx_PCI_EXPRESS ++ select IBM_EMAC_RGMII ++ select 460EX ++ help ++ This option enables support for the Netgear WNDR4700/WNDR4720 board. ++ + config XILINX_VIRTEX440_GENERIC_BOARD + bool "Generic Xilinx Virtex 5 FXT board support" + depends on 44x diff --git a/target/linux/apm821xx/patches-5.4/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-5.4/300-fix-atheros-nics-on-apm82181.patch new file mode 100644 index 0000000000..110726d258 --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/300-fix-atheros-nics-on-apm82181.patch @@ -0,0 +1,51 @@ +--- a/arch/powerpc/platforms/4xx/pci.c ++++ b/arch/powerpc/platforms/4xx/pci.c +@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po + u32 val; + + /* +- * Do a software reset on PCIe ports. +- * This code is to fix the issue that pci drivers doesn't re-assign +- * bus number for PCIE devices after Uboot +- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 +- * PT quad port, SAS LSI 1064E) ++ * Only reset the PHY when no link is currently established. ++ * This is for the Atheros PCIe board which has problems to establish ++ * the link (again) after this PHY reset. All other currently tested ++ * PCIe boards don't show this problem. + */ +- +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); +- mdelay(10); ++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); ++ if (!(val & 0x00001000)) { ++ /* ++ * Do a software reset on PCIe ports. ++ * This code is to fix the issue that pci drivers doesn't re-assign ++ * bus number for PCIE devices after Uboot ++ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 ++ * PT quad port, SAS LSI 1064E) ++ */ ++ ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); ++ mdelay(10); ++ } + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT << 20; +@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po + mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130); + mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); + +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); +- mdelay(50); +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); ++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); ++ if (!(val & 0x00001000)) { ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); ++ mdelay(50); ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); ++ } + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | diff --git a/target/linux/apm821xx/patches-5.4/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-5.4/301-fix-memory-map-wndr4700.patch new file mode 100644 index 0000000000..6eb04b2c25 --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/301-fix-memory-map-wndr4700.patch @@ -0,0 +1,14 @@ +--- a/arch/powerpc/platforms/4xx/pci.c ++++ b/arch/powerpc/platforms/4xx/pci.c +@@ -1905,9 +1905,9 @@ static void __init ppc4xx_configure_pcie + * if it works + */ + out_le32(mbase + PECFG_PIM0LAL, 0x00000000); +- out_le32(mbase + PECFG_PIM0LAH, 0x00000000); ++ out_le32(mbase + PECFG_PIM0LAH, 0x00000008); + out_le32(mbase + PECFG_PIM1LAL, 0x00000000); +- out_le32(mbase + PECFG_PIM1LAH, 0x00000000); ++ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c); + out_le32(mbase + PECFG_PIM01SAH, 0xffff0000); + out_le32(mbase + PECFG_PIM01SAL, 0x00000000); + diff --git a/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch new file mode 100644 index 0000000000..0bc4b2c65b --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch @@ -0,0 +1,1026 @@ +Subject: [PATCH v2 1/5] usb: xhci: add firmware loader for uPD720201 and uPD720202 w/o ROM +Date: Fri, 21 Jun 2019 14:29:09 +0530 +Message-Id: <20190621085913.8722-2-vkoul@kernel.org> +From: Christian Lamparter <chunkeey@googlemail.com> + +This patch adds a firmware loader for the uPD720201K8-711-BAC-A +and uPD720202K8-711-BAA-A variant. Both of these chips are listed +in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as +devices which need the firmware loader on page 2 in order to +work as they "do not support the External ROM". + +The "Firmware Download Sequence" is describe in chapter +"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. + +The firmware "K2013080.mem" is available from a USB3.0 Host to +PCIe Adapter (PP2U-E card) "Firmware download" archive. An +alternative version can be sourced from Netgear's WNDR4700 GPL +archives. + +The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 +(2012-06-15) state that the firmware is for the following devices: + - uPD720201 ES 2.0 sample whose revision ID is 2. + - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. + - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. + +Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> +Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> +Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> +[vkoul: fixed comments: + used macros for timeout count and delay + removed renesas_fw_alive_check + cleaned renesas_fw_callback + removed recurion for renesas_fw_download + added MODULE_FIRMWARE] +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + drivers/usb/host/xhci-pci.c | 458 ++++++++++++++++++++++++++++++++++++ + 1 file changed, 458 insertions(+) + +--- a/drivers/usb/host/xhci-pci.c ++++ b/drivers/usb/host/xhci-pci.c +@@ -12,6 +12,8 @@ + #include <linux/slab.h> + #include <linux/module.h> + #include <linux/acpi.h> ++#include <linux/firmware.h> ++#include <linux/unaligned/access_ok.h> + + #include "xhci.h" + #include "xhci-trace.h" +@@ -48,6 +50,44 @@ + #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc + #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 + ++#define RENESAS_FW_VERSION 0x6C ++#define RENESAS_ROM_CONFIG 0xF0 ++#define RENESAS_FW_STATUS 0xF4 ++#define RENESAS_FW_STATUS_MSB 0xF5 ++#define RENESAS_ROM_STATUS 0xF6 ++#define RENESAS_ROM_STATUS_MSB 0xF7 ++#define RENESAS_DATA0 0xF8 ++#define RENESAS_DATA1 0xFC ++ ++#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7) ++#define RENESAS_FW_VERSION_OFFSET 8 ++ ++#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0) ++#define RENESAS_FW_STATUS_LOCK BIT(1) ++#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4) ++ #define RENESAS_FW_STATUS_INVALID 0 ++ #define RENESAS_FW_STATUS_SUCCESS BIT(4) ++ #define RENESAS_FW_STATUS_ERROR BIT(5) ++#define RENESAS_FW_STATUS_SET_DATA0 BIT(8) ++#define RENESAS_FW_STATUS_SET_DATA1 BIT(9) ++ ++#define RENESAS_ROM_STATUS_ACCESS BIT(0) ++#define RENESAS_ROM_STATUS_ERASE BIT(1) ++#define RENESAS_ROM_STATUS_RELOAD BIT(2) ++#define RENESAS_ROM_STATUS_RESULT GENMASK(6, 4) ++ #define RENESAS_ROM_STATUS_INVALID 0 ++ #define RENESAS_ROM_STATUS_SUCCESS BIT(4) ++ #define RENESAS_ROM_STATUS_ERROR BIT(5) ++#define RENESAS_ROM_STATUS_SET_DATA0 BIT(8) ++#define RENESAS_ROM_STATUS_SET_DATA1 BIT(9) ++#define RENESAS_ROM_STATUS_ROM_EXISTS BIT(15) ++ ++#define RENESAS_ROM_ERASE_MAGIC 0x5A65726F ++#define RENESAS_ROM_WRITE_MAGIC 0x53524F4D ++ ++#define RENESAS_RETRY 1000 ++#define RENESAS_DELAY 10 ++ + static const char hcd_name[] = "xhci_hcd"; + + static struct hc_driver __read_mostly xhci_pci_hc_driver; +@@ -262,6 +302,873 @@ static void xhci_pme_acpi_rtd3_enable(st + static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } + #endif /* CONFIG_ACPI */ + ++static const struct renesas_fw_entry { ++ const char *firmware_name; ++ u16 device; ++ u8 revision; ++ u16 expected_version; ++} renesas_fw_table[] = { ++ /* ++ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A ++ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which ++ * need the software loader. ++ * ++ * PP2U/ReleaseNote_USB3-201-202-FW.txt: ++ * ++ * Note: This firmware is for the following devices. ++ * - uPD720201 ES 2.0 sample whose revision ID is 2. ++ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. ++ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. ++ * ++ * Entry expected_version should be kept in increasing order for a ++ * chip, so that driver will pick first version and if that fails ++ * then next one will be picked ++ */ ++ { "K2013080.mem", 0x0014, 0x02, 0x2013 }, ++ { "K2013080.mem", 0x0014, 0x03, 0x2013 }, ++ { "K2026090.mem", 0x0014, 0x03, 0x2026 }, ++ { "K2013080.mem", 0x0015, 0x02, 0x2013 }, ++ { "K2026090.mem", 0x0015, 0x02, 0x2026 }, ++}; ++ ++MODULE_FIRMWARE("K2013080.mem"); ++MODULE_FIRMWARE("K2026090.mem"); ++ ++static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev) ++{ ++ const struct renesas_fw_entry *entry; ++ size_t i; ++ ++ /* This loader will only work with a RENESAS device. */ ++ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS)) ++ return NULL; ++ ++ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) { ++ entry = &renesas_fw_table[i]; ++ if (entry->device == dev->device && ++ entry->revision == dev->revision) ++ return entry; ++ } ++ ++ return NULL; ++} ++ ++static const struct ++renesas_fw_entry *renesas_get_next_entry(struct pci_dev *dev, ++ const struct renesas_fw_entry *entry) ++{ ++ const struct renesas_fw_entry *next_entry; ++ size_t i; ++ ++ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) { ++ next_entry = &renesas_fw_table[i]; ++ if (next_entry->device == dev->device && ++ next_entry->revision == dev->revision && ++ next_entry->expected_version > entry->expected_version) ++ return next_entry; ++ } ++ ++ return NULL; ++} ++ ++static int renesas_fw_download_image(struct pci_dev *dev, ++ const u32 *fw, ++ size_t step) ++{ ++ size_t i; ++ int err; ++ u8 fw_status; ++ bool data0_or_data1; ++ ++ /* ++ * The hardware does alternate between two 32-bit pages. ++ * (This is because each row of the firmware is 8 bytes). ++ * ++ * for even steps we use DATA0, for odd steps DATA1. ++ */ ++ data0_or_data1 = (step & 1) == 1; ++ ++ /* step+1. Read "Set DATAX" and confirm it is cleared. */ ++ for (i = 0; i < RENESAS_RETRY; i++) { ++ err = pci_read_config_byte(dev, RENESAS_FW_STATUS_MSB, ++ &fw_status); ++ if (err) ++ return pcibios_err_to_errno(err); ++ if (!(fw_status & BIT(data0_or_data1))) ++ break; ++ ++ udelay(RENESAS_DELAY); ++ } ++ if (i == RENESAS_RETRY) ++ return -ETIMEDOUT; ++ ++ /* ++ * step+2. Write FW data to "DATAX". ++ * "LSB is left" => force little endian ++ */ ++ err = pci_write_config_dword(dev, data0_or_data1 ? ++ RENESAS_DATA1 : RENESAS_DATA0, ++ (__force u32)cpu_to_le32(fw[step])); ++ if (err) ++ return pcibios_err_to_errno(err); ++ ++ udelay(100); ++ ++ /* step+3. Set "Set DATAX". */ ++ err = pci_write_config_byte(dev, RENESAS_FW_STATUS_MSB, ++ BIT(data0_or_data1)); ++ if (err) ++ return pcibios_err_to_errno(err); ++ ++ return 0; ++} ++ ++static int renesas_fw_verify(struct pci_dev *dev, ++ const void *fw_data, ++ size_t length) ++{ ++ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev); ++ u16 fw_version_pointer; ++ u16 fw_version; ++ ++ if (!entry) ++ return -EINVAL; ++ ++ /* ++ * The Firmware's Data Format is describe in ++ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124 ++ */ ++ ++ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */ ++ if (length % 8 != 0) ++ dev_warn(&dev->dev, "firmware size is not a multiple of 8."); ++ ++ /* ++ * The bootrom chips of the big brother have sizes up to 64k, let's ++ * assume that's the biggest the firmware can get. ++ */ ++ if (length < 0x1000 || length >= 0x10000) { ++ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).", ++ length); ++ return -EINVAL; ++ } ++ ++ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */ ++ if (get_unaligned_le16(fw_data) != 0x55aa) { ++ dev_err(&dev->dev, "no valid firmware header found."); ++ return -EINVAL; ++ } ++ ++ /* verify the firmware version position and print it. */ ++ fw_version_pointer = get_unaligned_le16(fw_data + 4); ++ if (fw_version_pointer + 2 >= length) { ++ dev_err(&dev->dev, ++ "firmware version pointer is outside of the firmware image."); ++ return -EINVAL; ++ } ++ ++ fw_version = get_unaligned_le16(fw_data + fw_version_pointer); ++ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version); ++ ++ if (fw_version != entry->expected_version) { ++ dev_err(&dev->dev, ++ "firmware version mismatch, expected version: %02x.", ++ entry->expected_version); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int renesas_check_rom_state(struct pci_dev *pdev) ++{ ++ const struct renesas_fw_entry *entry; ++ u16 rom_state; ++ u32 version; ++ bool valid_version = false; ++ int err, i; ++ ++ /* check FW version */ ++ err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version); ++ if (err) ++ return pcibios_err_to_errno(err); ++ ++ version &= RENESAS_FW_VERSION_FIELD; ++ version = version >> RENESAS_FW_VERSION_OFFSET; ++ dev_dbg(&pdev->dev, "Found FW version loaded is %x\n", version); ++ ++ /* treat version in renesas_fw_table as correct ones */ ++ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) { ++ entry = &renesas_fw_table[i]; ++ if (version == entry->expected_version) { ++ dev_dbg(&pdev->dev, "Detected valid ROM version..\n"); ++ valid_version = true; ++ } ++ } ++ ++ /* ++ * Test if ROM is present and loaded, if so we can skip everything ++ */ ++ err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state); ++ if (err) ++ return pcibios_err_to_errno(err); ++ ++ if (rom_state & BIT(15)) { ++ /* ROM exists */ ++ dev_dbg(&pdev->dev, "ROM exists\n"); ++ ++ /* Check the "Result Code" Bits (6:4) and act accordingly */ ++ switch (rom_state & RENESAS_ROM_STATUS_RESULT) { ++ case RENESAS_ROM_STATUS_SUCCESS: ++ dev_dbg(&pdev->dev, "Success ROM load..."); ++ /* we have valid version and status so success */ ++ if (valid_version) ++ return 0; ++ break; ++ ++ case RENESAS_ROM_STATUS_INVALID: /* No result yet */ ++ dev_dbg(&pdev->dev, "No result as it is ROM..."); ++ /* we have valid version and status so success */ ++ if (valid_version) ++ return 0; ++ break; ++ ++ case RENESAS_ROM_STATUS_ERROR: /* Error State */ ++ default: /* All other states are marked as "Reserved states" */ ++ dev_err(&pdev->dev, "Invalid ROM.."); ++ break; ++ } ++ } ++ ++ return -EIO; ++} ++ ++static int renesas_fw_check_running(struct pci_dev *pdev) ++{ ++ int err; ++ u8 fw_state; ++ ++ /* Check if device has ROM and loaded, if so skip everything */ ++ err = renesas_check_rom_state(pdev); ++ if (!err) ++ return err; ++ ++ /* ++ * Test if the device is actually needing the firmware. As most ++ * BIOSes will initialize the device for us. If the device is ++ * initialized. ++ */ ++ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state); ++ if (err) ++ return pcibios_err_to_errno(err); ++ ++ /* ++ * Check if "FW Download Lock" is locked. If it is and the FW is ++ * ready we can simply continue. If the FW is not ready, we have ++ * to give up. ++ */ ++ if (fw_state & RENESAS_FW_STATUS_LOCK) { ++ dev_dbg(&pdev->dev, "FW Download Lock is engaged."); ++ ++ if (fw_state & RENESAS_FW_STATUS_SUCCESS) ++ return 0; ++ ++ dev_err(&pdev->dev, ++ "FW Download Lock is set and FW is not ready. Giving Up."); ++ return -EIO; ++ } ++ ++ /* ++ * Check if "FW Download Enable" is set. If someone (us?) tampered ++ * with it and it can't be resetted, we have to give up too... and ++ * ask for a forgiveness and a reboot. ++ */ ++ if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) { ++ dev_err(&pdev->dev, ++ "FW Download Enable is stale. Giving Up (poweroff/reboot needed)."); ++ return -EIO; ++ } ++ ++ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */ ++ switch (fw_state & RENESAS_FW_STATUS_RESULT) { ++ case 0: /* No result yet */ ++ dev_dbg(&pdev->dev, "FW is not ready/loaded yet."); ++ ++ /* tell the caller, that this device needs the firmware. */ ++ return 1; ++ ++ case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */ ++ dev_dbg(&pdev->dev, "FW is ready."); ++ return 0; ++ ++ case RENESAS_FW_STATUS_ERROR: /* Error State */ ++ dev_err(&pdev->dev, ++ "hardware is in an error state. Giving up (poweroff/reboot needed)."); ++ return -ENODEV; ++ ++ default: /* All other states are marked as "Reserved states" */ ++ dev_err(&pdev->dev, ++ "hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).", ++ (fw_state & RENESAS_FW_STATUS_RESULT) >> 4); ++ return -EINVAL; ++ } ++} ++ ++static int renesas_fw_download(struct pci_dev *pdev, ++ const struct firmware *fw) ++{ ++ const u32 *fw_data = (const u32 *)fw->data; ++ size_t i; ++ int err; ++ u8 fw_status; ++ ++ /* ++ * For more information and the big picture: please look at the ++ * "Firmware Download Sequence" in "7.1 FW Download Interface" ++ * of R19UH0078EJ0500 Rev.5.00 page 131 ++ */ ++ ++ /* ++ * 0. Set "FW Download Enable" bit in the ++ * "FW Download Control & Status Register" at 0xF4 ++ */ ++ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, ++ RENESAS_FW_STATUS_DOWNLOAD_ENABLE); ++ if (err) ++ return pcibios_err_to_errno(err); ++ ++ /* 1 - 10 follow one step after the other. */ ++ for (i = 0; i < fw->size / 4; i++) { ++ err = renesas_fw_download_image(pdev, fw_data, i); ++ if (err) { ++ dev_err(&pdev->dev, ++ "Firmware Download Step %zd failed at position %zd bytes with (%d).", ++ i, i * 4, err); ++ return err; ++ } ++ } ++ ++ /* ++ * This sequence continues until the last data is written to ++ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1" ++ * is cleared by the hardware beforehand. ++ */ ++ for (i = 0; i < RENESAS_RETRY; i++) { ++ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB, ++ &fw_status); ++ if (err) ++ return pcibios_err_to_errno(err); ++ if (!(fw_status & (BIT(0) | BIT(1)))) ++ break; ++ ++ udelay(RENESAS_DELAY); ++ } ++ if (i == RENESAS_RETRY) ++ dev_warn(&pdev->dev, "Final Firmware Download step timed out."); ++ ++ /* ++ * 11. After finishing writing the last data of FW, the ++ * System Software must clear "FW Download Enable" ++ */ ++ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0); ++ if (err) ++ return pcibios_err_to_errno(err); ++ ++ /* 12. Read "Result Code" and confirm it is good. */ ++ for (i = 0; i < RENESAS_RETRY; i++) { ++ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status); ++ if (err) ++ return pcibios_err_to_errno(err); ++ if (fw_status & RENESAS_FW_STATUS_SUCCESS) ++ break; ++ ++ udelay(RENESAS_DELAY); ++ } ++ if (i == RENESAS_RETRY) { ++ /* Timed out / Error - let's see if we can fix this */ ++ err = renesas_fw_check_running(pdev); ++ switch (err) { ++ case 0: /* ++ * we shouldn't end up here. ++ * maybe it took a little bit longer. ++ * But all should be well? ++ */ ++ break; ++ ++ case 1: /* (No result yet! */ ++ return -ETIMEDOUT; ++ ++ default: ++ return err; ++ } ++ } ++ /* ++ * Optional last step: Engage Firmware Lock ++ * ++ * err = pci_write_config_byte(pdev, 0xF4, BIT(2)); ++ * if (err) ++ * return pcibios_err_to_errno(err); ++ */ ++ ++ return 0; ++} ++ ++struct renesas_fw_ctx { ++ struct pci_dev *pdev; ++ const struct pci_device_id *id; ++ bool resume; ++ const struct renesas_fw_entry *entry; ++}; ++ ++static int xhci_pci_probe(struct pci_dev *pdev, ++ const struct pci_device_id *id); ++ ++static bool renesas_check_rom(struct pci_dev *pdev) ++{ ++ u16 rom_status; ++ int retval; ++ ++ /* 1. Check if external ROM exists */ ++ retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status); ++ if (retval) ++ return false; ++ ++ rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS; ++ if (rom_status) { ++ dev_dbg(&pdev->dev, "External ROM exists\n"); ++ return true; /* External ROM exists */ ++ } ++ ++ return false; ++} ++ ++static void renesas_rom_erase(struct pci_dev *pdev) ++{ ++ int retval, i; ++ u8 status; ++ ++ dev_dbg(&pdev->dev, "Performing ROM Erase...\n"); ++ retval = pci_write_config_dword(pdev, RENESAS_DATA0, ++ RENESAS_ROM_ERASE_MAGIC); ++ if (retval) { ++ dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n", ++ pcibios_err_to_errno(retval)); ++ return; ++ } ++ ++ retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); ++ if (retval) { ++ dev_err(&pdev->dev, "ROM status read failed: %d\n", ++ pcibios_err_to_errno(retval)); ++ return; ++ } ++ status |= RENESAS_ROM_STATUS_ERASE; ++ retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status); ++ if (retval) { ++ dev_err(&pdev->dev, "ROM erase set word write failed\n"); ++ return; ++ } ++ ++ /* sleep a bit while ROM is erased */ ++ msleep(20); ++ ++ for (i = 0; i < RENESAS_RETRY; i++) { ++ retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, ++ &status); ++ status &= RENESAS_ROM_STATUS_ERASE; ++ if (!status) ++ break; ++ ++ mdelay(RENESAS_DELAY); ++ } ++ ++ if (i == RENESAS_RETRY) ++ dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status); ++ ++ dev_dbg(&pdev->dev, "ROM Erase... Done success\n"); ++} ++ ++static bool renesas_download_rom(struct pci_dev *pdev, ++ const u32 *fw, size_t step) ++{ ++ bool data0_or_data1; ++ u8 fw_status; ++ size_t i; ++ int err; ++ ++ /* ++ * The hardware does alternate between two 32-bit pages. ++ * (This is because each row of the firmware is 8 bytes). ++ * ++ * for even steps we use DATA0, for odd steps DATA1. ++ */ ++ data0_or_data1 = (step & 1) == 1; ++ ++ /* Read "Set DATAX" and confirm it is cleared. */ ++ for (i = 0; i < RENESAS_RETRY; i++) { ++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB, ++ &fw_status); ++ if (err) { ++ dev_err(&pdev->dev, "Read ROM Status failed: %d\n", ++ pcibios_err_to_errno(err)); ++ return false; ++ } ++ if (!(fw_status & BIT(data0_or_data1))) ++ break; ++ ++ udelay(RENESAS_DELAY); ++ } ++ if (i == RENESAS_RETRY) { ++ dev_err(&pdev->dev, "Timeout for Set DATAX step: %zd\n", step); ++ return false; ++ } ++ ++ /* ++ * Write FW data to "DATAX". ++ * "LSB is left" => force little endian ++ */ ++ err = pci_write_config_dword(pdev, data0_or_data1 ? ++ RENESAS_DATA1 : RENESAS_DATA0, ++ (__force u32)cpu_to_le32(fw[step])); ++ if (err) { ++ dev_err(&pdev->dev, "Write to DATAX failed: %d\n", ++ pcibios_err_to_errno(err)); ++ return false; ++ } ++ ++ udelay(100); ++ ++ /* Set "Set DATAX". */ ++ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS_MSB, ++ BIT(data0_or_data1)); ++ if (err) { ++ dev_err(&pdev->dev, "Write config for DATAX failed: %d\n", ++ pcibios_err_to_errno(err)); ++ return false; ++ } ++ ++ return true; ++} ++ ++static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw) ++{ ++ const u32 *fw_data = (const u32 *)fw->data; ++ int err, i; ++ u8 status; ++ ++ /* 2. Write magic word to Data0 */ ++ err = pci_write_config_dword(pdev, RENESAS_DATA0, ++ RENESAS_ROM_WRITE_MAGIC); ++ if (err) ++ return false; ++ ++ /* 3. Set External ROM access */ ++ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, ++ RENESAS_ROM_STATUS_ACCESS); ++ if (err) ++ goto remove_bypass; ++ ++ /* 4. Check the result */ ++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); ++ if (err) ++ goto remove_bypass; ++ status &= GENMASK(6, 4); ++ if (status) { ++ dev_err(&pdev->dev, ++ "setting external rom failed: %x\n", status); ++ goto remove_bypass; ++ } ++ ++ /* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */ ++ for (i = 0; i < fw->size / 4; i++) { ++ err = renesas_download_rom(pdev, fw_data, i); ++ if (!err) { ++ dev_err(&pdev->dev, ++ "ROM Download Step %d failed at position %d bytes\n", ++ i, i * 4); ++ goto remove_bypass; ++ } ++ } ++ ++ /* ++ * wait till DATA0/1 is cleared ++ */ ++ for (i = 0; i < RENESAS_RETRY; i++) { ++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB, ++ &status); ++ if (err) ++ goto remove_bypass; ++ if (!(status & (BIT(0) | BIT(1)))) ++ break; ++ ++ udelay(RENESAS_DELAY); ++ } ++ if (i == RENESAS_RETRY) { ++ dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n"); ++ goto remove_bypass; ++ } ++ ++ /* 17. Remove bypass */ ++ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0); ++ if (err) ++ return false; ++ ++ udelay(10); ++ ++ /* 18. check result */ ++ for (i = 0; i < RENESAS_RETRY; i++) { ++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); ++ if (err) { ++ dev_err(&pdev->dev, "Read ROM status failed:%d\n", ++ pcibios_err_to_errno(err)); ++ return false; ++ } ++ status &= RENESAS_ROM_STATUS_RESULT; ++ if (status == RENESAS_ROM_STATUS_SUCCESS) { ++ dev_dbg(&pdev->dev, "Download ROM success\n"); ++ break; ++ } ++ udelay(RENESAS_DELAY); ++ } ++ if (i == RENESAS_RETRY) { /* Timed out */ ++ dev_err(&pdev->dev, ++ "Download to external ROM TO: %x\n", status); ++ return false; ++ } ++ ++ dev_dbg(&pdev->dev, "Download to external ROM scuceeded\n"); ++ ++ /* Last step set Reload */ ++ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, ++ RENESAS_ROM_STATUS_RELOAD); ++ if (err) { ++ dev_err(&pdev->dev, "Set ROM execute failed: %d\n", ++ pcibios_err_to_errno(err)); ++ return false; ++ } ++ ++ /* ++ * wait till Reload is cleared ++ */ ++ for (i = 0; i < RENESAS_RETRY; i++) { ++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); ++ if (err) ++ return false; ++ if (!(status & RENESAS_ROM_STATUS_RELOAD)) ++ break; ++ ++ udelay(RENESAS_DELAY); ++ } ++ if (i == RENESAS_RETRY) { ++ dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status); ++ return false; ++ } ++ ++ return true; ++ ++remove_bypass: ++ pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0); ++ return false; ++} ++ ++static void renesas_fw_callback(const struct firmware *fw, ++ void *context) ++{ ++ struct renesas_fw_ctx *ctx = context; ++ struct pci_dev *pdev = ctx->pdev; ++ struct device *parent = pdev->dev.parent; ++ const struct renesas_fw_entry *next_entry; ++ bool rom; ++ int err; ++ ++ if (!fw) { ++ dev_err(&pdev->dev, "firmware failed to load\n"); ++ /* ++ * we didn't find firmware, check if we have another ++ * entry for this device ++ */ ++ next_entry = renesas_get_next_entry(ctx->pdev, ctx->entry); ++ if (next_entry) { ++ ctx->entry = next_entry; ++ dev_dbg(&pdev->dev, "Found next entry, requesting: %s\n", ++ next_entry->firmware_name); ++ request_firmware_nowait(THIS_MODULE, 1, ++ next_entry->firmware_name, ++ &pdev->dev, GFP_KERNEL, ++ ctx, renesas_fw_callback); ++ return; ++ } else { ++ goto cleanup; ++ } ++ } ++ ++ err = renesas_fw_verify(pdev, fw->data, fw->size); ++ if (err) ++ goto cleanup; ++ ++ /* Check if the device has external ROM */ ++ rom = renesas_check_rom(pdev); ++ if (rom) { ++ /* perfrom chip erase first */ ++ renesas_rom_erase(pdev); ++ ++ /* lets try loading fw on ROM first */ ++ rom = renesas_setup_rom(pdev, fw); ++ if (!rom) { ++ dev_err(&pdev->dev, ++ "ROM load failed, falling back on FW load\n"); ++ } else { ++ dev_dbg(&pdev->dev, "ROM load done..\n"); ++ ++ release_firmware(fw); ++ goto do_probe; ++ } ++ } ++ ++ err = renesas_fw_download(pdev, fw); ++ release_firmware(fw); ++ if (err) { ++ dev_err(&pdev->dev, "firmware failed to download (%d).", err); ++ goto cleanup; ++ } ++ ++do_probe: ++ if (ctx->resume) ++ return; ++ ++ err = xhci_pci_probe(pdev, ctx->id); ++ if (!err) { ++ /* everything worked */ ++ devm_kfree(&pdev->dev, ctx); ++ return; ++ } ++ ++cleanup: ++ /* in case of an error - fall through */ ++ dev_info(&pdev->dev, "Unloading driver"); ++ ++ if (parent) ++ device_lock(parent); ++ ++ device_release_driver(&pdev->dev); ++ ++ if (parent) ++ device_unlock(parent); ++ ++ pci_dev_put(pdev); ++} ++ ++static int renesas_fw_alive_check(struct pci_dev *pdev) ++{ ++ const struct renesas_fw_entry *entry; ++ ++ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */ ++ entry = renesas_needs_fw_dl(pdev); ++ if (!entry) ++ return 0; ++ ++ return renesas_fw_check_running(pdev); ++} ++ ++static int renesas_fw_download_to_hw(struct pci_dev *pdev, ++ const struct pci_device_id *id, ++ bool do_resume) ++{ ++ const struct renesas_fw_entry *entry; ++ struct renesas_fw_ctx *ctx; ++ int err; ++ ++ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */ ++ entry = renesas_needs_fw_dl(pdev); ++ if (!entry) ++ return 0; ++ ++ err = renesas_fw_check_running(pdev); ++ /* Continue ahead, if the firmware is already running. */ ++ if (err == 0) ++ return 0; ++ ++ if (err != 1) ++ return err; ++ ++ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); ++ if (!ctx) ++ return -ENOMEM; ++ ctx->pdev = pdev; ++ ctx->resume = do_resume; ++ ctx->id = id; ++ ctx->entry = entry; ++ ++ pci_dev_get(pdev); ++ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name, ++ &pdev->dev, GFP_KERNEL, ++ ctx, renesas_fw_callback); ++ if (err) { ++ pci_dev_put(pdev); ++ return err; ++ } ++ ++ /* ++ * The renesas_fw_callback() callback will continue the probe ++ * process, once it aquires the firmware. ++ */ ++ return 1; ++} ++ ++static int renesas_check_if_fw_dl_is_needed(struct pci_dev *pdev) ++{ ++ int err; ++ u8 fw_state; ++ ++ /* ++ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A ++ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which ++ * need a firmware in order to work. ++ * ++ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. ++ * - uPD720201 ES 2.0 sample whose revision ID is 2. ++ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. ++ */ ++ if (!((pdev->vendor == PCI_VENDOR_ID_RENESAS) && ++ ((pdev->device == 0x0015 && pdev->revision == 0x02) || ++ (pdev->device == 0x0014 && ++ (pdev->revision == 0x02 || pdev->revision == 0x03))))) ++ return 0; ++ ++ /* Check if device has ROM and loaded, if so skip everything */ ++ err = renesas_check_rom_state(pdev); ++ if (!err) ++ return err; ++ ++ /* ++ * Test if the firmware was uploaded and is running. ++ * As most BIOSes will initialize the device for us. ++ */ ++ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state); ++ if (err) ++ return pcibios_err_to_errno(err); ++ ++ /* Check the "Result Code" Bits (6:4) and act accordingly */ ++ switch (fw_state & RENESAS_FW_STATUS_RESULT) { ++ case 0: /* No result yet */ ++ dev_err(&pdev->dev, "FW is not ready/loaded yet."); ++ return -ENODEV; ++ ++ case RENESAS_FW_STATUS_SUCCESS: ++ dev_dbg(&pdev->dev, "FW is ready."); ++ return 0; ++ ++ case RENESAS_FW_STATUS_ERROR: ++ dev_err(&pdev->dev, "HW is in an error state."); ++ return -ENODEV; ++ ++ default: /* All other states are marked as "Reserved states" */ ++ dev_err(&pdev->dev, "HW is in an invalid state (%x).", ++ (fw_state & 0x70) >> 4); ++ return -EINVAL; ++ } ++} ++ + /* called during probe() after chip reset completes */ + static int xhci_pci_setup(struct usb_hcd *hcd) + { +@@ -300,6 +1207,27 @@ static int xhci_pci_probe(struct pci_dev + struct hc_driver *driver; + struct usb_hcd *hcd; + ++ /* ++ * Check if this device is a RENESAS uPD720201/2 device. ++ * Otherwise, we can continue with xhci_pci_probe as usual. ++ */ ++ retval = renesas_fw_download_to_hw(dev, id, false); ++ switch (retval) { ++ case 0: ++ break; ++ ++ case 1: /* let it load the firmware and recontinue the probe. */ ++ return 0; ++ ++ default: ++ return retval; ++ }; ++ ++ /* Check if this device is a RENESAS uPD720201/2 device. */ ++ retval = renesas_check_if_fw_dl_is_needed(dev); ++ if (retval) ++ return retval; ++ + driver = (struct hc_driver *)id->driver_data; + + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ +@@ -361,6 +1289,16 @@ static void xhci_pci_remove(struct pci_d + { + struct xhci_hcd *xhci; + ++ if (renesas_fw_alive_check(dev)) { ++ /* ++ * bail out early, if this was a renesas device w/o FW. ++ * Else we might hit the NMI watchdog in xhci_handsake ++ * during xhci_reset as part of the driver's unloading. ++ * which we forced in the renesas_fw_callback(). ++ */ ++ return; ++ } ++ + xhci = hcd_to_xhci(pci_get_drvdata(dev)); + xhci->xhc_state |= XHCI_STATE_REMOVING; + if (xhci->shared_hcd) { +@@ -484,6 +1422,11 @@ static int xhci_pci_resume(struct usb_hc + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + usb_enable_intel_xhci_ports(pdev); + ++ /* Check if this device is a RENESAS uPD720201/2 device. */ ++ retval = renesas_check_if_fw_dl_is_needed(pdev); ++ if (retval) ++ return retval; ++ + if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) + xhci_ssic_port_unused_quirk(hcd, false); + diff --git a/target/linux/apm821xx/patches-5.4/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-5.4/802-usb-xhci-force-msi-renesas-xhci.patch new file mode 100644 index 0000000000..a745ea6f44 --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/802-usb-xhci-force-msi-renesas-xhci.patch @@ -0,0 +1,53 @@ +From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@gmail.com> +Date: Thu, 23 Jun 2016 20:28:20 +0200 +Subject: [PATCH] usb: xhci: force MSI for uPD720201 and + uPD720202 + +The APM82181 does not support MSI-X. When probed, it will +produce a noisy warning. + +--- + drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 362 insertions(+) + +--- a/drivers/usb/host/xhci-pci.c ++++ b/drivers/usb/host/xhci-pci.c +@@ -215,6 +215,7 @@ static void xhci_pci_quirks(struct devic + pdev->device == 0x0015) { + xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci->quirks |= XHCI_ZERO_64B_REGS; ++ xhci->quirks |= XHCI_FORCE_MSI; + } + if (pdev->vendor == PCI_VENDOR_ID_VIA) + xhci->quirks |= XHCI_RESET_ON_RESUME; +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -422,10 +422,14 @@ static int xhci_try_enable_msi(struct us + free_irq(hcd->irq, hcd); + hcd->irq = 0; + +- ret = xhci_setup_msix(xhci); +- if (ret) +- /* fall back to msi*/ ++ if (xhci->quirks & XHCI_FORCE_MSI) { + ret = xhci_setup_msi(xhci); ++ } else { ++ ret = xhci_setup_msix(xhci); ++ if (ret) ++ /* fall back to msi*/ ++ ret = xhci_setup_msi(xhci); ++ } + + if (!ret) { + hcd->msi_enabled = 1; +--- a/drivers/usb/host/xhci.h ++++ b/drivers/usb/host/xhci.h +@@ -1876,6 +1876,7 @@ struct xhci_hcd { + /* support xHCI 0.96 spec USB2 software LPM */ + unsigned sw_lpm_support:1; + /* support xHCI 1.0 spec USB2 hardware LPM */ ++#define XHCI_FORCE_MSI (1 << 24) + unsigned hw_lpm_support:1; + /* Broken Suspend flag for SNPS Suspend resume issue */ + unsigned broken_suspend:1; diff --git a/target/linux/apm821xx/patches-5.4/803-hwmon-tc654-add-detection-routine.patch b/target/linux/apm821xx/patches-5.4/803-hwmon-tc654-add-detection-routine.patch new file mode 100644 index 0000000000..f8b30ae1b3 --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/803-hwmon-tc654-add-detection-routine.patch @@ -0,0 +1,65 @@ +From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@gmail.com> +Date: Sun, 17 Dec 2017 17:27:15 +0100 +Subject: [PATCH 1/2] hwmon: tc654 add detection routine + +This patch adds a detection routine for the TC654/TC655 +chips. Both IDs are listed in the Datasheet. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++ + 1 file changed, 29 insertions(+) + +--- a/drivers/hwmon/tc654.c ++++ b/drivers/hwmon/tc654.c +@@ -64,6 +64,11 @@ enum tc654_regs { + /* Register data is read (and cached) at most once per second. */ + #define TC654_UPDATE_INTERVAL HZ + ++/* Manufacturer and Version Identification Register Values */ ++#define TC654_MFR_ID_MICROCHIP 0x84 ++#define TC654_VER_ID 0x00 ++#define TC655_VER_ID 0x01 ++ + struct tc654_data { + struct i2c_client *client; + +@@ -497,6 +502,29 @@ static const struct i2c_device_id tc654_ + {} + }; + ++static int ++tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info) ++{ ++ struct i2c_adapter *adapter = new_client->adapter; ++ int manufacturer, product; ++ ++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) ++ return -ENODEV; ++ ++ manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID); ++ if (manufacturer != TC654_MFR_ID_MICROCHIP) ++ return -ENODEV; ++ ++ product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID); ++ if (!((product == TC654_VER_ID) || (product == TC655_VER_ID))) ++ return -ENODEV; ++ ++ strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655", ++ I2C_NAME_SIZE); ++ return 0; ++} ++ ++ + MODULE_DEVICE_TABLE(i2c, tc654_id); + + static struct i2c_driver tc654_driver = { +@@ -505,6 +533,7 @@ static struct i2c_driver tc654_driver = + }, + .probe = tc654_probe, + .id_table = tc654_id, ++ .detect = tc654_detect, + }; + + module_i2c_driver(tc654_driver); diff --git a/target/linux/apm821xx/patches-5.4/804-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-5.4/804-hwmon-tc654-add-thermal_cooling-device.patch new file mode 100644 index 0000000000..c3c6870fab --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/804-hwmon-tc654-add-thermal_cooling-device.patch @@ -0,0 +1,179 @@ +From 9cb27801b5cbad2e1aaf45aac428cb2fac5e1372 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@gmail.com> +Date: Sun, 17 Dec 2017 17:29:13 +0100 +Subject: [PATCH] hwmon: tc654: add thermal_cooling device + +This patch adds a thermaL_cooling device to the tc654 driver. +This allows the chip to be used for DT-based cooling. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++------- + 1 file changed, 86 insertions(+), 17 deletions(-) + +diff --git a/drivers/hwmon/tc654.c b/drivers/hwmon/tc654.c +index c7939b7c417b..66e6bbe795a5 100644 +--- a/drivers/hwmon/tc654.c ++++ b/drivers/hwmon/tc654.c +@@ -15,6 +15,7 @@ + #include <linux/module.h> + #include <linux/mutex.h> + #include <linux/slab.h> ++#include <linux/thermal.h> + #include <linux/util_macros.h> + + enum tc654_regs { +@@ -132,6 +133,9 @@ struct tc654_data { + * writable register used to control the duty + * cycle of the V OUT output. + */ ++ ++ /* optional cooling device */ ++ struct thermal_cooling_device *cdev; + }; + + /* helper to grab and cache data, at most one time per second */ +@@ -367,36 +371,30 @@ static ssize_t pwm_mode_store(struct device *dev, struct device_attribute *da, + static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160, + 172, 184, 196, 207, 219, 231, 243, 255}; + ++static int get_pwm(struct tc654_data *data) ++{ ++ if (data->config & TC654_REG_CONFIG_SDM) ++ return 0; ++ else ++ return tc654_pwm_map[data->duty_cycle]; ++} ++ + static ssize_t pwm_show(struct device *dev, struct device_attribute *da, + char *buf) + { + struct tc654_data *data = tc654_update_client(dev); +- int pwm; + + if (IS_ERR(data)) + return PTR_ERR(data); + +- if (data->config & TC654_REG_CONFIG_SDM) +- pwm = 0; +- else +- pwm = tc654_pwm_map[data->duty_cycle]; +- +- return sprintf(buf, "%d\n", pwm); ++ return sprintf(buf, "%d\n", get_pwm(data)); + } + +-static ssize_t pwm_store(struct device *dev, struct device_attribute *da, +- const char *buf, size_t count) ++static int _set_pwm(struct tc654_data *data, unsigned long val) + { +- struct tc654_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; +- unsigned long val; + int ret; + +- if (kstrtoul(buf, 10, &val)) +- return -EINVAL; +- if (val > 255) +- return -EINVAL; +- + mutex_lock(&data->update_lock); + + if (val == 0) +@@ -416,6 +414,22 @@ static ssize_t pwm_store(struct device *dev, struct device_attribute *da, + + out: + mutex_unlock(&data->update_lock); ++ return ret; ++} ++ ++static ssize_t pwm_store(struct device *dev, struct device_attribute *da, ++ const char *buf, size_t count) ++{ ++ struct tc654_data *data = dev_get_drvdata(dev); ++ unsigned long val; ++ int ret; ++ ++ if (kstrtoul(buf, 10, &val)) ++ return -EINVAL; ++ if (val > 255) ++ return -EINVAL; ++ ++ ret = _set_pwm(data, val); + return ret < 0 ? ret : count; + } + +@@ -447,6 +461,47 @@ static struct attribute *tc654_attrs[] = { + + ATTRIBUTE_GROUPS(tc654); + ++/* cooling device */ ++ ++static int tc654_get_max_state(struct thermal_cooling_device *cdev, ++ unsigned long *state) ++{ ++ *state = 255; ++ return 0; ++} ++ ++static int tc654_get_cur_state(struct thermal_cooling_device *cdev, ++ unsigned long *state) ++{ ++ struct tc654_data *data = tc654_update_client(cdev->devdata); ++ ++ if (IS_ERR(data)) ++ return PTR_ERR(data); ++ ++ *state = get_pwm(data); ++ return 0; ++} ++ ++static int tc654_set_cur_state(struct thermal_cooling_device *cdev, ++ unsigned long state) ++{ ++ struct tc654_data *data = tc654_update_client(cdev->devdata); ++ ++ if (IS_ERR(data)) ++ return PTR_ERR(data); ++ ++ if (state > 255) ++ return -EINVAL; ++ ++ return _set_pwm(data, state); ++} ++ ++static const struct thermal_cooling_device_ops tc654_fan_cool_ops = { ++ .get_max_state = tc654_get_max_state, ++ .get_cur_state = tc654_get_cur_state, ++ .set_cur_state = tc654_set_cur_state, ++}; ++ + /* + * device probe and removal + */ +@@ -478,7 +533,21 @@ static int tc654_probe(struct i2c_client *client, + hwmon_dev = + devm_hwmon_device_register_with_groups(dev, client->name, data, + tc654_groups); +- return PTR_ERR_OR_ZERO(hwmon_dev); ++ if (IS_ERR(hwmon_dev)) ++ return PTR_ERR(hwmon_dev); ++ ++#if IS_ENABLED(CONFIG_OF) ++ /* Optional cooling device register for Device tree platforms */ ++ data->cdev = thermal_of_cooling_device_register(client->dev.of_node, ++ "tc654", hwmon_dev, ++ &tc654_fan_cool_ops); ++#else /* CONFIG_OF */ ++ /* Optional cooling device register for non Device tree platforms */ ++ data->cdev = thermal_cooling_device_register("tc654", hwmon_dev, ++ &tc654_fan_cool_ops); ++#endif /* CONFIG_OF */ ++ ++ return PTR_ERR_OR_ZERO(data->cdev); + } + + static const struct i2c_device_id tc654_id[] = { +-- +2.24.0 + diff --git a/target/linux/apm821xx/patches-5.4/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch b/target/linux/apm821xx/patches-5.4/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch new file mode 100644 index 0000000000..c6bb6c5f1a --- /dev/null +++ b/target/linux/apm821xx/patches-5.4/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch @@ -0,0 +1,34 @@ +From c9395ad54e2cabb87d408becc37566f3d8248933 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@gmail.com> +Date: Sun, 1 Dec 2019 02:08:23 +0100 +Subject: [PATCH] powerpc: bootwrapper: force gzip as mkimage's compression + method + +Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to +instruct the mkimage to use the xz compression, which isn't +supported. This patch forces the gzip compression, which is +supported and doesn't matter because the generated uImage for +the apm821xx target gets ignored as the OpenWrt toolchain will +do separate U-Boot kernel images for each device individually. + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + arch/powerpc/boot/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile +index dfbd7f22eef5..0bdef8e5f362 100644 +--- a/arch/powerpc/boot/Makefile ++++ b/arch/powerpc/boot/Makefile +@@ -254,7 +254,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo + + # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd + quiet_cmd_wrap = WRAP $@ +- cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ ++ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z gzip -c -o $@ -p $2 \ + $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ + vmlinux + +-- +2.24.0 + |