diff options
Diffstat (limited to 'target')
8 files changed, 21 insertions, 21 deletions
diff --git a/target/linux/cns3xxx/patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/cns3xxx/patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch index b2b6f509db..ca7148b301 100644 --- a/target/linux/cns3xxx/patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch +++ b/target/linux/cns3xxx/patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch @@ -20,7 +20,7 @@ #endif --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig -@@ -873,6 +873,17 @@ config DMA_CACHE_RWFO +@@ -899,6 +899,17 @@ config DMA_CACHE_RWFO in hardware, other workarounds are needed (e.g. cache maintenance broadcasting in software via FIQ). @@ -48,7 +48,7 @@ /* * The zero page is never written to, so never has any dirty -@@ -329,7 +330,10 @@ void flush_dcache_page(struct page *page +@@ -335,7 +336,10 @@ void flush_dcache_page(struct page *page mapping = page_mapping(page); @@ -62,7 +62,7 @@ else { --- a/arch/arm/mm/dma.h +++ b/arch/arm/mm/dma.h -@@ -4,8 +4,13 @@ +@@ -5,8 +5,13 @@ #include <asm/glue-cache.h> #ifndef MULTI_CACHE diff --git a/target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch b/target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch index 4f9f3e6465..6dd0ef0fef 100644 --- a/target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch +++ b/target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch @@ -4,7 +4,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -324,6 +324,13 @@ config KS8695_WATCHDOG +@@ -355,6 +355,13 @@ config KS8695_WATCHDOG Watchdog timer embedded into KS8695 processor. This will reboot your system when the timeout is reached. @@ -20,8 +20,8 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> help --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -47,6 +47,7 @@ obj-$(CONFIG_21285_WATCHDOG) += wdt285.o - obj-$(CONFIG_977_WATCHDOG) += wdt977.o +@@ -49,6 +49,7 @@ obj-$(CONFIG_977_WATCHDOG) += wdt977.o + obj-$(CONFIG_GEMINI_WATCHDOG) += gemini_wdt.o obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o +obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o @@ -151,7 +151,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> +MODULE_LICENSE("GPL"); --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h -@@ -33,5 +33,6 @@ struct twd_local_timer name __initdata = +@@ -34,5 +34,6 @@ struct twd_local_timer name __initdata = }; int twd_local_timer_register(struct twd_local_timer *); diff --git a/target/linux/cns3xxx/patches-4.14/025-smp_support.patch b/target/linux/cns3xxx/patches-4.14/025-smp_support.patch index 7c2624a3a6..dc8e4b03c2 100644 --- a/target/linux/cns3xxx/patches-4.14/025-smp_support.patch +++ b/target/linux/cns3xxx/patches-4.14/025-smp_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-cns3xxx/Makefile +++ b/arch/arm/mach-cns3xxx/Makefile -@@ -5,3 +5,5 @@ cns3xxx-y += core.o pm.o +@@ -6,3 +6,5 @@ cns3xxx-y += core.o pm.o cns3xxx-$(CONFIG_ATAGS) += devices.o cns3xxx-$(CONFIG_PCI) += pcie.o cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o @@ -8,7 +8,7 @@ +cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig -@@ -2,6 +2,9 @@ menuconfig ARCH_CNS3XXX +@@ -3,6 +3,9 @@ menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" depends on ARCH_MULTI_V6 select ARM_GIC diff --git a/target/linux/cns3xxx/patches-4.14/040-fiq_support.patch b/target/linux/cns3xxx/patches-4.14/040-fiq_support.patch index b391eb92d0..a52c554503 100644 --- a/target/linux/cns3xxx/patches-4.14/040-fiq_support.patch +++ b/target/linux/cns3xxx/patches-4.14/040-fiq_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig -@@ -5,6 +5,7 @@ menuconfig ARCH_CNS3XXX +@@ -6,6 +6,7 @@ menuconfig ARCH_CNS3XXX select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD select HAVE_SMP @@ -10,7 +10,7 @@ --- a/arch/arm/mach-cns3xxx/Makefile +++ b/arch/arm/mach-cns3xxx/Makefile -@@ -5,5 +5,5 @@ cns3xxx-y += core.o pm.o +@@ -6,5 +6,5 @@ cns3xxx-y += core.o pm.o cns3xxx-$(CONFIG_ATAGS) += devices.o cns3xxx-$(CONFIG_PCI) += pcie.o cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o @@ -29,7 +29,7 @@ */ --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig -@@ -856,7 +856,7 @@ config VDSO +@@ -882,7 +882,7 @@ config VDSO config DMA_CACHE_RWFO bool "Enable read/write for ownership DMA cache maintenance" diff --git a/target/linux/cns3xxx/patches-4.14/070-i2c_support.patch b/target/linux/cns3xxx/patches-4.14/070-i2c_support.patch index dc64da1e07..bacec36085 100644 --- a/target/linux/cns3xxx/patches-4.14/070-i2c_support.patch +++ b/target/linux/cns3xxx/patches-4.14/070-i2c_support.patch @@ -1,6 +1,6 @@ --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -441,6 +441,18 @@ config I2C_CBUS_GPIO +@@ -473,6 +473,18 @@ config I2C_CBUS_GPIO This driver can also be built as a module. If so, the module will be called i2c-cbus-gpio. @@ -21,11 +21,11 @@ depends on CPM1 || CPM2 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile -@@ -114,6 +114,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-vipe +@@ -128,6 +128,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-vipe obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o obj-$(CONFIG_I2C_BRCMSTB) += i2c-brcmstb.o +obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o - obj-$(CONFIG_I2C_OPAL) += i2c-opal.o + obj-$(CONFIG_I2C_MLXCPLD) += i2c-mlxcpld.o diff --git a/target/linux/cns3xxx/patches-4.14/095-gpio_support.patch b/target/linux/cns3xxx/patches-4.14/095-gpio_support.patch index 76eb7f64c2..8345f2f144 100644 --- a/target/linux/cns3xxx/patches-4.14/095-gpio_support.patch +++ b/target/linux/cns3xxx/patches-4.14/095-gpio_support.patch @@ -13,7 +13,7 @@ } --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig -@@ -2,6 +2,8 @@ menuconfig ARCH_CNS3XXX +@@ -3,6 +3,8 @@ menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" depends on ARCH_MULTI_V6 select ARM_GIC @@ -24,7 +24,7 @@ select HAVE_SMP --- a/arch/arm/mach-cns3xxx/Makefile +++ b/arch/arm/mach-cns3xxx/Makefile -@@ -1,7 +1,7 @@ +@@ -2,7 +2,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o diff --git a/target/linux/cns3xxx/patches-4.14/100-laguna_support.patch b/target/linux/cns3xxx/patches-4.14/100-laguna_support.patch index 3c0bba4316..c0160d8f12 100644 --- a/target/linux/cns3xxx/patches-4.14/100-laguna_support.patch +++ b/target/linux/cns3xxx/patches-4.14/100-laguna_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig -@@ -22,4 +22,12 @@ config MACH_CNS3420VB +@@ -23,4 +23,12 @@ config MACH_CNS3420VB This is a platform with an on-board ARM11 MPCore and has support for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. @@ -15,7 +15,7 @@ endif --- a/arch/arm/mach-cns3xxx/Makefile +++ b/arch/arm/mach-cns3xxx/Makefile -@@ -7,3 +7,5 @@ cns3xxx-$(CONFIG_PCI) += pcie.o +@@ -8,3 +8,5 @@ cns3xxx-$(CONFIG_PCI) += pcie.o cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/target/linux/cns3xxx/patches-4.14/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch b/target/linux/cns3xxx/patches-4.14/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch index 2e30fe5006..42430ead4c 100644 --- a/target/linux/cns3xxx/patches-4.14/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch +++ b/target/linux/cns3xxx/patches-4.14/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch @@ -1,6 +1,6 @@ --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c -@@ -2015,7 +2015,8 @@ static void pcie_write_mrrs(struct pci_d +@@ -2303,7 +2303,8 @@ static void pcie_write_mrrs(struct pci_d /* In the "safe" case, do not configure the MRRS. There appear to be * issues with setting MRRS to 0 on a number of devices. */ @@ -12,7 +12,7 @@ /* For Max performance, the MRRS must be set to the largest supported --- a/include/linux/pci.h +++ b/include/linux/pci.h -@@ -783,7 +783,7 @@ enum pcie_bus_config_types { +@@ -845,7 +845,7 @@ enum pcie_bus_config_types { PCIE_BUS_DEFAULT, /* ensure MPS matches upstream bridge */ PCIE_BUS_SAFE, /* use largest MPS boot-time devices support */ PCIE_BUS_PERFORMANCE, /* use MPS and MRRS for best performance */ |