diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/ipq40xx/image/Makefile | 79 |
1 files changed, 55 insertions, 24 deletions
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 3a9b58de4f..567f91d4d7 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -63,17 +63,19 @@ endef define Device/8dev_jalapeno $(call Device/FitImage) $(call Device/UbiFit) + DEVICE_VENDOR := 8devices + DEVICE_MODEL := Jalapeno DEVICE_DTS := qcom-ipq4018-jalapeno BLOCKSIZE := 128k PAGESIZE := 2048 - DEVICE_TITLE := 8devices Jalapeno endef TARGET_DEVICES += 8dev_jalapeno define Device/alfa-network_ap120c-ac $(call Device/FitImage) $(call Device/UbiFit) - DEVICE_TITLE := ALFA Network AP120C-AC + DEVICE_VENDOR := ALFA Network + DEVICE_MODEL := AP120C-AC DEVICE_DTS := qcom-ipq4018-ap120c-ac DEVICE_PACKAGES := ipq-wifi-alfa-network_ap120c-ac kmod-usb-acm \ kmod-tpm-i2c-atmel uboot-envtools @@ -87,8 +89,9 @@ TARGET_DEVICES += alfa-network_ap120c-ac define Device/asus_map-ac2200 $(call Device/FitImageLzma) + DEVICE_VENDOR := ASUS + DEVICE_MODEL := Lyra (MAP-AC2200) DEVICE_DTS := qcom-ipq4019-map-ac2200 - DEVICE_TITLE := ASUS Lyra MAP-AC2200 IMAGES := sysupgrade.bin DEVICE_PACKAGES := ipq-wifi-asus_map-ac2200 ath10k-firmware-qca9888-ct kmod-ath3k endef @@ -96,11 +99,12 @@ TARGET_DEVICES += asus_map-ac2200 define Device/asus_rt-ac58u $(call Device/FitImageLzma) + DEVICE_VENDOR := ASUS + DEVICE_MODEL := RT-AC58U DEVICE_DTS := qcom-ipq4018-rt-ac58u BLOCKSIZE := 128k PAGESIZE := 2048 DTB_SIZE := 65536 - DEVICE_TITLE := Asus RT-AC58U IMAGE_SIZE := 20439364 FILESYSTEMS := squashfs # Someone - in their infinite wisdom - decided to put the firmware @@ -116,9 +120,10 @@ TARGET_DEVICES += asus_rt-ac58u define Device/avm_fritzbox-4040 $(call Device/FitImageLzma) + DEVICE_VENDOR := AVM + DEVICE_MODEL := FRITZ!Box 4040 DEVICE_DTS := qcom-ipq4018-fritz4040 BOARD_NAME := fritz4040 - DEVICE_TITLE := AVM Fritz!Box 4040 IMAGE_SIZE := 29753344 UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin UBOOT_PARTITION_SIZE := 524288 @@ -131,8 +136,9 @@ TARGET_DEVICES += avm_fritzbox-4040 define Device/avm_fritzbox-7530 $(call Device/FitImageLzma) + DEVICE_VENDOR := AVM + DEVICE_MODEL := FRITZ!Box 7530 DEVICE_DTS := qcom-ipq4019-fritzbox-7530 - DEVICE_TITLE := AVM Fritz!Box 7530 DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzbox-7530 IMAGES := sysupgrade.bin endef @@ -140,8 +146,9 @@ TARGET_DEVICES += avm_fritzbox-7530 define Device/avm_fritzrepeater-3000 $(call Device/FitImageLzma) + DEVICE_VENDOR := AVM + DEVICE_MODEL := FRITZ!Repeater 3000 DEVICE_DTS := qcom-ipq4019-fritzrepeater-3000 - DEVICE_TITLE := AVM Fritz!Repeater 3000 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-3000 IMAGES := sysupgrade.bin endef @@ -149,10 +156,11 @@ TARGET_DEVICES += avm_fritzrepeater-3000 define Device/compex_wpj428 $(call Device/FitImage) + DEVICE_VENDOR := Compex + DEVICE_MODEL := WPJ428 DEVICE_DTS := qcom-ipq4028-wpj428 DEVICE_DTS_CONFIG := config@4 BLOCKSIZE := 64k - DEVICE_TITLE := Compex WPJ428 IMAGE_SIZE := 31232k KERNEL_SIZE := 4096k IMAGES = sysupgrade.bin @@ -163,7 +171,8 @@ TARGET_DEVICES += compex_wpj428 define Device/engenius_eap1300 $(call Device/FitImage) - DEVICE_TITLE := EnGenius EAP1300 + DEVICE_VENDOR := EnGenius + DEVICE_MODEL := EAP1300 DEVICE_DTS_CONFIG := config@4 BOARD_NAME := eap1300 DEVICE_DTS := qcom-ipq4018-eap1300 @@ -177,11 +186,12 @@ TARGET_DEVICES += engenius_eap1300 define Device/engenius_ens620ext $(call Device/FitImage) + DEVICE_VENDOR := EnGenius + DEVICE_MODEL := ENS620EXT DEVICE_DTS := qcom-ipq4018-ens620ext DEVICE_DTS_CONFIG := config@4 BLOCKSIZE := 64k PAGESIZE := 256 - DEVICE_TITLE := EnGenius ENS620EXT BOARD_NAME := ENS620EXT VENDOR_ID := 0x0101 PRODUCT_ID := 0x79 @@ -203,7 +213,8 @@ TARGET_DEVICES += engenius_ens620ext define Device/glinet_gl-b1300 $(call Device/FitImage) - DEVICE_TITLE := GL.iNet GL-B1300 + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-B1300 BOARD_NAME := gl-b1300 DEVICE_DTS := qcom-ipq4029-gl-b1300 KERNEL_SIZE := 4096k @@ -235,7 +246,9 @@ define Device/linksys_ea6350v3 # 4. The kernel command line from uboot is harcoded to boot with # rootfs either in mtd11 or mtd13. $(call Device/FitzImage) - DEVICE_TITLE := Linksys EA6350v3 + DEVICE_VENDOR := Linksys + DEVICE_MODEL := EA6350 + DEVICE_VARIANT := v3 DEVICE_DTS := qcom-ipq4018-ea6350v3 BLOCKSIZE := 128k PAGESIZE := 2048 @@ -250,7 +263,8 @@ TARGET_DEVICES += linksys_ea6350v3 define Device/linksys_ea8300 $(call Device/FitzImage) - DEVICE_TITLE := Linksys EA8300 (Dallas) + DEVICE_VENDOR := Linksys + DEVICE_MODEL := EA8300 DEVICE_DTS := qcom-ipq4019-linksys_ea8300 KERNEL_SIZE := 3072k IMAGE_SIZE := 87040k @@ -265,10 +279,11 @@ TARGET_DEVICES += linksys_ea8300 define Device/meraki_mr33 $(call Device/FitImage) + DEVICE_VENDOR := Cisco Meraki + DEVICE_MODEL := MR33 DEVICE_DTS := qcom-ipq4029-mr33 BLOCKSIZE := 131072 PAGESIZE := 2048 - DEVICE_TITLE := Cisco Meraki MR33 IMAGES = sysupgrade.bin DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct endef @@ -283,24 +298,29 @@ endef define Device/netgear_ex6100v2 $(call Device/netgear_ex61x0v2) + DEVICE_VENDOR := Netgear + DEVICE_MODEL := EX6100 + DEVICE_VARIANT := v2 DEVICE_DTS := qcom-ipq4018-ex6100v2 - DEVICE_TITLE := Netgear EX6100v2 endef TARGET_DEVICES += netgear_ex6100v2 define Device/netgear_ex6150v2 $(call Device/netgear_ex61x0v2) + DEVICE_VENDOR := Netgear + DEVICE_MODEL := EX6150 + DEVICE_VARIANT := v2 DEVICE_DTS := qcom-ipq4018-ex6150v2 - DEVICE_TITLE := Netgear EX6150v2 endef TARGET_DEVICES += netgear_ex6150v2 define Device/openmesh_a42 $(call Device/FitImageLzma) + DEVICE_VENDOR := OpenMesh + DEVICE_MODEL := A42 DEVICE_DTS := qcom-ipq4018-a42 DEVICE_DTS_CONFIG := config@om.a42 BLOCKSIZE := 64k - DEVICE_TITLE := OpenMesh A42 KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) IMAGE_SIZE := 15616k IMAGES = factory.bin sysupgrade.bin @@ -312,10 +332,11 @@ TARGET_DEVICES += openmesh_a42 define Device/openmesh_a62 $(call Device/FitImageLzma) + DEVICE_VENDOR := OpenMesh + DEVICE_MODEL := A62 DEVICE_DTS := qcom-ipq4019-a62 DEVICE_DTS_CONFIG := config@om.a62 BLOCKSIZE := 64k - DEVICE_TITLE := OpenMesh A62 KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) IMAGE_SIZE := 15552k IMAGES = factory.bin sysupgrade.bin @@ -327,7 +348,9 @@ endef TARGET_DEVICES += openmesh_a62 define Device/qcom_ap-dk01.1-c1 - DEVICE_TITLE := QCA AP-DK01.1-C1 + DEVICE_VENDOR := Qualcomm Atheros + DEVICE_MODEL := AP-DK01.1 + DEVICE_VARIANT := C1 BOARD_NAME := ap-dk01.1-c1 DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1 KERNEL_INSTALL := 1 @@ -342,19 +365,23 @@ TARGET_DEVICES += qcom_ap-dk01.1-c1 define Device/qcom_ap-dk04.1-c1 $(call Device/FitImage) $(call Device/UbiFit) + DEVICE_VENDOR := Qualcomm Atheros + DEVICE_MODEL := AP-DK04.1 + DEVICE_VARIANT := C1 DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1 KERNEL_INSTALL := 1 KERNEL_SIZE := 4048k BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := ap-dk04.1-c1 - DEVICE_TITLE := QCA AP-DK04.1-C1 endef TARGET_DEVICES += qcom_ap-dk04.1-c1 define Device/qxwlan_e2600ac-c1 $(call Device/FitImage) - DEVICE_TITLE := Qxwlan E2600AC-C1 (nor flash) + DEVICE_VENDOR := Qxwlan + DEVICE_MODEL := E2600AC + DEVICE_VARIANT := C1 BOARD_NAME := e2600ac-c1 DEVICE_DTS := qcom-ipq4019-qxwlan-e2600ac-c1 KERNEL_SIZE := 4096k @@ -368,19 +395,22 @@ TARGET_DEVICES += qxwlan_e2600ac-c1 define Device/qxwlan_e2600ac-c2 $(call Device/FitImage) $(call Device/UbiFit) + DEVICE_VENDOR := Qxwlan + DEVICE_MODEL := E2600AC + DEVICE_VARIANT := C2 DEVICE_DTS := qcom-ipq4019-qxwlan-e2600ac-c2 KERNEL_INSTALL := 1 BLOCKSIZE := 128k PAGESIZE := 2048 - DEVICE_TITLE := Qxwlan E2600AC-C2 (nornand flash) DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac endef TARGET_DEVICES += qxwlan_e2600ac-c2 define Device/zyxel_nbg6617 $(call Device/FitImageLzma) + DEVICE_VENDOR := ZyXEL + DEVICE_MODEL := NBG6617 DEVICE_DTS := qcom-ipq4018-nbg6617 - DEVICE_TITLE := ZyXEL NBG6617 ROOTFS_SIZE := 24960k RAS_BOARD := NBG6617 RAS_ROOTFS_SIZE := 19840k @@ -399,7 +429,8 @@ TARGET_DEVICES += zyxel_nbg6617 define Device/zyxel_wre6606 $(call Device/FitImage) - DEVICE_TITLE := ZyXEL WRE6606 + DEVICE_VENDOR := ZyXEL + DEVICE_MODEL := WRE6606 DEVICE_DTS_CONFIG := config@4 DEVICE_DTS := qcom-ipq4018-wre6606 IMAGES := sysupgrade.bin |