diff options
Diffstat (limited to 'target')
-rw-r--r-- | target/linux/ramips/dts/mt7628an_minew_g1-c.dts | 146 | ||||
-rw-r--r-- | target/linux/ramips/image/mt76x8.mk | 8 | ||||
-rw-r--r-- | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 5 |
3 files changed, 159 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7628an_minew_g1-c.dts b/target/linux/ramips/dts/mt7628an_minew_g1-c.dts new file mode 100644 index 0000000000..74ea47aee0 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_minew_g1-c.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Minew G1-C"; + compatible = "minew,g1-c", "mediatek,mt7628an-soc"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "red:system"; + gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + ws2812 { + gpio-export,name = "ws2812"; + gpio-export,output = <1>; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + nrf_power { + gpio-export,name = "nrf_power"; + gpio-export,output = <1>; + gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&state_default { + gpio { + groups = "gpio"; + function = "gpio"; + }; + + p0led_an { + groups = "p0led_an"; + function = "gpio"; + }; + + uart1 { + groups = "uart1"; + function = "gpio"; + }; + + wdt { + groups = "wdt"; + function = "gpio"; + }; +}; + +&spi0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&esw { + mediatek,portmap = <0x3e>; +}; + +&wmac { + status = "okay"; +}; + +&sdhci { + status = "okay"; + mediatek,cd-high; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 3ba4d658be..3f738fc488 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -269,6 +269,14 @@ define Device/mercury_mac1200r-v2 endef TARGET_DEVICES += mercury_mac1200r-v2 +define Device/minew_g1-c + IMAGE_SIZE := 15744k + DEVICE_VENDOR := Minew + DEVICE_MODEL := G1-C + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-serial-cp210x +endef +TARGET_DEVICES += minew_g1-c + define Device/netgear_r6020 $(Device/netgear_sercomm_nor) IMAGE_SIZE := 7104k diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 703936f217..032d7e75b2 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -32,6 +32,11 @@ ramips_setup_interfaces() ucidef_add_switch_attr "switch0" "enable" "false" ucidef_set_interface_lan "eth0" ;; + minew,g1-c) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" + ucidef_set_interface_lan "eth0" "dhcp" + ;; asus,rt-n10p-v3|\ asus,rt-n11p-b1|\ asus,rt-n12-vp-b1|\ |