aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch4
-rw-r--r--target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch2
-rw-r--r--target/linux/bcm4908/patches-5.4/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch8
-rw-r--r--target/linux/bcm4908/patches-5.4/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch4
-rw-r--r--target/linux/bcm4908/patches-5.4/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch12
-rw-r--r--target/linux/bcm4908/patches-5.4/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch2
-rw-r--r--target/linux/bcm4908/patches-5.4/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch10
-rw-r--r--target/linux/bcm4908/patches-5.4/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch2
-rw-r--r--target/linux/bcm4908/patches-5.4/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch2
-rw-r--r--target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch2
-rw-r--r--target/linux/bcm4908/patches-5.4/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch2
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0001-net-dsa-bcm_sf2-Also-configure-Port-5-for-2Gb-sec-on.patch37
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0002-Revert-net-dsa-bcm_sf2-Also-configure-Port-5-for-2Gb.patch43
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0005-net-dsa-b53-Restore-VLAN-entries-upon-re-configurati.patch48
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0006-net-dsa-b53-Prevent-tagged-VLAN-on-port-7-for-7278.patch33
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0007-net-dsa-b53-Deny-enslaving-port-7-for-7278-into-a-br.patch31
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0008-net-dsa-bcm_sf2-Disable-learning-for-ASP-port.patch36
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0009-net-dsa-bcm_sf2-Check-earlier-for-FLOW_EXT-and-FLOW_.patch33
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0010-net-dsa-bcm_sf2-Move-writing-of-CFP_DATA-5-into-slic.patch131
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0011-net-dsa-bcm_sf2-Add-support-for-matching-VLAN-TCI.patch181
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0012-net-dsa-bcm_sf2-Support-specifying-VLAN-tag-egress-r.patch94
-rw-r--r--target/linux/generic/backport-5.4/707-v5.7-0016-net-dsa-b53-Fix-valid-setting-for-MDB-entries.patch2
-rw-r--r--target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch4
23 files changed, 695 insertions, 28 deletions
diff --git a/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch b/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch
index 04e506f6fe..776cf4a1f2 100644
--- a/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch
+++ b/target/linux/bcm4908/patches-5.4/070-v5.10-0001-net-dsa-b53-Use-dev_-err-info-instead-of-pr_.patch
@@ -26,7 +26,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/gpio.h>
-@@ -2567,8 +2565,9 @@ int b53_switch_detect(struct b53_device
+@@ -2596,8 +2594,9 @@ int b53_switch_detect(struct b53_device
dev->chip_id = id32;
break;
default:
@@ -38,7 +38,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
return -ENODEV;
}
}
-@@ -2598,7 +2597,8 @@ int b53_switch_register(struct b53_devic
+@@ -2627,7 +2626,8 @@ int b53_switch_register(struct b53_devic
if (ret)
return ret;
diff --git a/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch b/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch
index d619aa45b7..a83cec3950 100644
--- a/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch
+++ b/target/linux/bcm4908/patches-5.4/070-v5.10-0002-net-dsa-b53-Print-err-message-on-SW_RST-timeout.patch
@@ -15,7 +15,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -768,8 +768,11 @@ static int b53_switch_reset(struct b53_d
+@@ -783,8 +783,11 @@ static int b53_switch_reset(struct b53_d
usleep_range(1000, 2000);
} while (timeout-- > 0);
diff --git a/target/linux/bcm4908/patches-5.4/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch b/target/linux/bcm4908/patches-5.4/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
index e27ecc3498..531388da70 100644
--- a/target/linux/bcm4908/patches-5.4/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
+++ b/target/linux/bcm4908/patches-5.4/071-v5.12-0001-net-dsa-bcm_sf2-support-BCM4908-s-integrated-switch.patch
@@ -23,7 +23,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2363,6 +2363,22 @@ static const struct b53_chip_data b53_sw
+@@ -2392,6 +2392,22 @@ static const struct b53_chip_data b53_sw
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
@@ -68,7 +68,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
offset = CORE_STS_OVERRIDE_IMP;
else
offset = CORE_STS_OVERRIDE_IMP2;
-@@ -555,7 +556,8 @@ static void bcm_sf2_sw_mac_config(struct
+@@ -563,7 +564,8 @@ static void bcm_sf2_sw_mac_config(struct
if (port == core_readl(priv, CORE_IMP0_PRT_ID))
return;
@@ -78,7 +78,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
else
offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-@@ -1005,6 +1007,30 @@ struct bcm_sf2_of_data {
+@@ -1013,6 +1015,30 @@ struct bcm_sf2_of_data {
unsigned int num_cfp_rules;
};
@@ -109,7 +109,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/* Register offsets for the SWITCH_REG_* block */
static const u16 bcm_sf2_7445_reg_offsets[] = {
[REG_SWITCH_CNTRL] = 0x00,
-@@ -1053,6 +1079,9 @@ static const struct bcm_sf2_of_data bcm_
+@@ -1061,6 +1087,9 @@ static const struct bcm_sf2_of_data bcm_
};
static const struct of_device_id bcm_sf2_of_match[] = {
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch
index 9590327649..a4bab32f95 100644
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch
+++ b/target/linux/bcm4908/patches-5.4/075-v5.13-0001-net-dsa-bcm_sf2-store-PHY-interface-mode-in-port-str.patch
@@ -18,7 +18,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -392,8 +392,9 @@ static void bcm_sf2_intr_disable(struct
+@@ -400,8 +400,9 @@ static void bcm_sf2_intr_disable(struct
static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
struct device_node *dn)
{
@@ -29,7 +29,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
unsigned int port_num;
priv->moca_port = -1;
-@@ -402,19 +403,26 @@ static void bcm_sf2_identify_ports(struc
+@@ -410,19 +411,26 @@ static void bcm_sf2_identify_ports(struc
if (of_property_read_u32(port, "reg", &port_num))
continue;
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
index 21717ffc3c..e13be23a65 100644
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
+++ b/target/linux/bcm4908/patches-5.4/075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
@@ -37,7 +37,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -381,6 +381,44 @@ static int bcm_sf2_sw_rst(struct bcm_sf2
+@@ -389,6 +389,44 @@ static int bcm_sf2_sw_rst(struct bcm_sf2
return 0;
}
@@ -82,7 +82,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
{
intrl2_0_mask_set(priv, 0xffffffff);
-@@ -751,6 +789,8 @@ static int bcm_sf2_sw_resume(struct dsa_
+@@ -759,6 +797,8 @@ static int bcm_sf2_sw_resume(struct dsa_
return ret;
}
@@ -91,7 +91,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
ret = bcm_sf2_cfp_resume(ds);
if (ret)
return ret;
-@@ -1016,6 +1056,7 @@ struct bcm_sf2_of_data {
+@@ -1024,6 +1064,7 @@ struct bcm_sf2_of_data {
const u16 *reg_offsets;
unsigned int core_reg_align;
unsigned int num_cfp_rules;
@@ -99,7 +99,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
};
static const u16 bcm_sf2_4908_reg_offsets[] = {
-@@ -1040,6 +1081,7 @@ static const struct bcm_sf2_of_data bcm_
+@@ -1048,6 +1089,7 @@ static const struct bcm_sf2_of_data bcm_
.core_reg_align = 0,
.reg_offsets = bcm_sf2_4908_reg_offsets,
.num_cfp_rules = 0, /* FIXME */
@@ -107,7 +107,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
};
/* Register offsets for the SWITCH_REG_* block */
-@@ -1150,6 +1192,7 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1158,6 +1200,7 @@ static int bcm_sf2_sw_probe(struct platf
priv->reg_offsets = data->reg_offsets;
priv->core_reg_align = data->core_reg_align;
priv->num_cfp_rules = data->num_cfp_rules;
@@ -115,7 +115,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
priv->rcdev = devm_reset_control_get_optional_exclusive(&pdev->dev,
"switch");
-@@ -1209,6 +1252,8 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1217,6 +1260,8 @@ static int bcm_sf2_sw_probe(struct platf
return ret;
}
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch
index a2aa554a60..da27963bf8 100644
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch
+++ b/target/linux/bcm4908/patches-5.4/075-v5.13-0003-net-dsa-bcm_sf2-Fill-in-BCM4908-CFP-entries.patch
@@ -14,7 +14,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1080,7 +1080,7 @@ static const struct bcm_sf2_of_data bcm_
+@@ -1088,7 +1088,7 @@ static const struct bcm_sf2_of_data bcm_
.type = BCM4908_DEVICE_ID,
.core_reg_align = 0,
.reg_offsets = bcm_sf2_4908_reg_offsets,
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch
index 162b7ece3b..442e35ad98 100644
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch
+++ b/target/linux/bcm4908/patches-5.4/075-v5.13-0004-net-dsa-bcm_sf2-add-function-finding-RGMII-register.patch
@@ -57,7 +57,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-@@ -600,6 +625,7 @@ static void bcm_sf2_sw_mac_config(struct
+@@ -608,6 +633,7 @@ static void bcm_sf2_sw_mac_config(struct
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
u32 id_mode_dis = 0, port_mode;
@@ -65,7 +65,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
u32 reg, offset;
if (port == core_readl(priv, CORE_IMP0_PRT_ID))
-@@ -629,10 +655,12 @@ static void bcm_sf2_sw_mac_config(struct
+@@ -637,10 +663,12 @@ static void bcm_sf2_sw_mac_config(struct
goto force_link;
}
@@ -79,7 +79,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
reg &= ~ID_MODE_DIS;
reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
-@@ -647,7 +675,7 @@ static void bcm_sf2_sw_mac_config(struct
+@@ -655,7 +683,7 @@ static void bcm_sf2_sw_mac_config(struct
reg |= RX_PAUSE_EN;
}
@@ -88,7 +88,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
force_link:
/* Force link settings detected from the PHY */
-@@ -678,6 +706,7 @@ static void bcm_sf2_sw_mac_link_set(stru
+@@ -686,6 +714,7 @@ static void bcm_sf2_sw_mac_link_set(stru
phy_interface_t interface, bool link)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
@@ -96,7 +96,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
u32 reg;
if (!phy_interface_mode_is_rgmii(interface) &&
-@@ -685,13 +714,15 @@ static void bcm_sf2_sw_mac_link_set(stru
+@@ -693,13 +722,15 @@ static void bcm_sf2_sw_mac_link_set(stru
interface != PHY_INTERFACE_MODE_REVMII)
return;
diff --git a/target/linux/bcm4908/patches-5.4/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch b/target/linux/bcm4908/patches-5.4/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch
index 09e00d5a5f..1abec90243 100644
--- a/target/linux/bcm4908/patches-5.4/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch
+++ b/target/linux/bcm4908/patches-5.4/075-v5.13-0005-net-dsa-bcm_sf2-fix-BCM4908-RGMII-reg-s.patch
@@ -33,7 +33,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
break;
default:
switch (port) {
-@@ -1099,9 +1104,7 @@ static const u16 bcm_sf2_4908_reg_offset
+@@ -1107,9 +1112,7 @@ static const u16 bcm_sf2_4908_reg_offset
[REG_PHY_REVISION] = 0x14,
[REG_SPHY_CNTRL] = 0x24,
[REG_CROSSBAR] = 0xc8,
diff --git a/target/linux/bcm4908/patches-5.4/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch b/target/linux/bcm4908/patches-5.4/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch
index 12db03ef0c..00ea23005b 100644
--- a/target/linux/bcm4908/patches-5.4/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch
+++ b/target/linux/bcm4908/patches-5.4/076-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch
@@ -82,7 +82,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
}
}
-@@ -1105,9 +1142,14 @@ static const u16 bcm_sf2_4908_reg_offset
+@@ -1113,9 +1150,14 @@ static const u16 bcm_sf2_4908_reg_offset
[REG_SPHY_CNTRL] = 0x24,
[REG_CROSSBAR] = 0xc8,
[REG_RGMII_11_CNTRL] = 0x014c,
diff --git a/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch b/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
index d7a4c5b1b8..39efb11d81 100644
--- a/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
+++ b/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
@@ -29,7 +29,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1388,10 +1388,14 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1396,10 +1396,14 @@ static int bcm_sf2_sw_probe(struct platf
rev = reg_readl(priv, REG_PHY_REVISION);
priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
diff --git a/target/linux/bcm4908/patches-5.4/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.4/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
index 7ddbb44d35..d18bfc0dea 100644
--- a/target/linux/bcm4908/patches-5.4/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
+++ b/target/linux/bcm4908/patches-5.4/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
@@ -15,7 +15,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1402,6 +1402,12 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1410,6 +1410,12 @@ static int bcm_sf2_sw_probe(struct platf
priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
priv->irq0, priv->irq1);
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0001-net-dsa-bcm_sf2-Also-configure-Port-5-for-2Gb-sec-on.patch b/target/linux/generic/backport-5.4/707-v5.7-0001-net-dsa-bcm_sf2-Also-configure-Port-5-for-2Gb-sec-on.patch
new file mode 100644
index 0000000000..61a037b361
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0001-net-dsa-bcm_sf2-Also-configure-Port-5-for-2Gb-sec-on.patch
@@ -0,0 +1,37 @@
+From 7458bd540fa0a90220b9e8c349d910d9dde9caf8 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Fri, 14 Feb 2020 16:32:29 -0800
+Subject: [PATCH] net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278
+
+Either port 5 or port 8 can be used on a 7278 device, make sure that
+port 5 also gets configured properly for 2Gb/sec in that case.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/bcm_sf2.c | 3 +++
+ drivers/net/dsa/bcm_sf2_regs.h | 1 +
+ 2 files changed, 4 insertions(+)
+
+--- a/drivers/net/dsa/bcm_sf2.c
++++ b/drivers/net/dsa/bcm_sf2.c
+@@ -620,6 +620,9 @@ force_link:
+ reg |= RXFLOW_CNTL;
+ }
+
++ if (priv->type == BCM7278_DEVICE_ID && dsa_is_cpu_port(ds, port))
++ reg |= GMIIP_SPEED_UP_2G;
++
+ core_writel(priv, reg, offset);
+ }
+
+--- a/drivers/net/dsa/bcm_sf2_regs.h
++++ b/drivers/net/dsa/bcm_sf2_regs.h
+@@ -178,6 +178,7 @@ enum bcm_sf2_reg_offs {
+ #define RXFLOW_CNTL (1 << 4)
+ #define TXFLOW_CNTL (1 << 5)
+ #define SW_OVERRIDE (1 << 6)
++#define GMIIP_SPEED_UP_2G (1 << 7)
+
+ #define CORE_WATCHDOG_CTRL 0x001e4
+ #define SOFTWARE_RESET (1 << 7)
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0002-Revert-net-dsa-bcm_sf2-Also-configure-Port-5-for-2Gb.patch b/target/linux/generic/backport-5.4/707-v5.7-0002-Revert-net-dsa-bcm_sf2-Also-configure-Port-5-for-2Gb.patch
new file mode 100644
index 0000000000..2b99f47436
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0002-Revert-net-dsa-bcm_sf2-Also-configure-Port-5-for-2Gb.patch
@@ -0,0 +1,43 @@
+From 3f02735e5da5367e4cd563ce6e5c21ce27922248 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 24 Feb 2020 15:44:26 -0800
+Subject: [PATCH] Revert "net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec
+ on 7278"
+
+This reverts commit 7458bd540fa0a90220b9e8c349d910d9dde9caf8 ("net: dsa:
+bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278") as it causes
+advanced congestion buffering issues with 7278 switch devices when using
+their internal Giabit PHY. While this is being debugged, continue with
+conservative defaults that work and do not cause packet loss.
+
+Fixes: 7458bd540fa0 ("net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278")
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/bcm_sf2.c | 3 ---
+ drivers/net/dsa/bcm_sf2_regs.h | 1 -
+ 2 files changed, 4 deletions(-)
+
+--- a/drivers/net/dsa/bcm_sf2.c
++++ b/drivers/net/dsa/bcm_sf2.c
+@@ -620,9 +620,6 @@ force_link:
+ reg |= RXFLOW_CNTL;
+ }
+
+- if (priv->type == BCM7278_DEVICE_ID && dsa_is_cpu_port(ds, port))
+- reg |= GMIIP_SPEED_UP_2G;
+-
+ core_writel(priv, reg, offset);
+ }
+
+--- a/drivers/net/dsa/bcm_sf2_regs.h
++++ b/drivers/net/dsa/bcm_sf2_regs.h
+@@ -178,7 +178,6 @@ enum bcm_sf2_reg_offs {
+ #define RXFLOW_CNTL (1 << 4)
+ #define TXFLOW_CNTL (1 << 5)
+ #define SW_OVERRIDE (1 << 6)
+-#define GMIIP_SPEED_UP_2G (1 << 7)
+
+ #define CORE_WATCHDOG_CTRL 0x001e4
+ #define SOFTWARE_RESET (1 << 7)
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0005-net-dsa-b53-Restore-VLAN-entries-upon-re-configurati.patch b/target/linux/generic/backport-5.4/707-v5.7-0005-net-dsa-b53-Restore-VLAN-entries-upon-re-configurati.patch
new file mode 100644
index 0000000000..cf8be49075
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0005-net-dsa-b53-Restore-VLAN-entries-upon-re-configurati.patch
@@ -0,0 +1,48 @@
+From d7a0b1f7652f9f6b7ba0c9d8ad8edd6b8c0c1511 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 30 Mar 2020 14:38:47 -0700
+Subject: [PATCH] net: dsa: b53: Restore VLAN entries upon (re)configuration
+
+The first time b53_configure_vlan() is called we have not configured any
+VLAN entries yet, since that happens later when interfaces get brought
+up. When b53_configure_vlan() is called again from suspend/resume we
+need to restore all VLAN entries though.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -696,7 +696,9 @@ int b53_configure_vlan(struct dsa_switch
+ {
+ struct b53_device *dev = ds->priv;
+ struct b53_vlan vl = { 0 };
++ struct b53_vlan *v;
+ int i, def_vid;
++ u16 vid;
+
+ def_vid = b53_default_pvid(dev);
+
+@@ -717,6 +719,19 @@ int b53_configure_vlan(struct dsa_switch
+ if (!is5325(dev) && !is5365(dev))
+ b53_set_jumbo(dev, dev->enable_jumbo, false);
+
++ /* Upon initial call we have not set-up any VLANs, but upon
++ * system resume, we need to restore all VLAN entries.
++ */
++ for (vid = def_vid; vid < dev->num_vlans; vid++) {
++ v = &dev->vlans[vid];
++
++ if (!v->members)
++ continue;
++
++ b53_set_vlan_entry(dev, vid, v);
++ b53_fast_age_vlan(dev, vid);
++ }
++
+ return 0;
+ }
+ EXPORT_SYMBOL(b53_configure_vlan);
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0006-net-dsa-b53-Prevent-tagged-VLAN-on-port-7-for-7278.patch b/target/linux/generic/backport-5.4/707-v5.7-0006-net-dsa-b53-Prevent-tagged-VLAN-on-port-7-for-7278.patch
new file mode 100644
index 0000000000..12c9546f7b
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0006-net-dsa-b53-Prevent-tagged-VLAN-on-port-7-for-7278.patch
@@ -0,0 +1,33 @@
+From 88631864da093377ce6d5e60b5639328622a8e5c Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 30 Mar 2020 14:38:48 -0700
+Subject: [PATCH] net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
+
+On 7278, port 7 of the switch connects to the ASP UniMAC which is not
+capable of processing VLAN tagged frames. We can still allow the port to
+be part of a VLAN entry, and we may want it to be untagged on egress on
+that VLAN because of that limitation.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1366,6 +1366,14 @@ int b53_vlan_prepare(struct dsa_switch *
+ if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0)
+ return -EOPNOTSUPP;
+
++ /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
++ * receiving VLAN tagged frames at all, we can still allow the port to
++ * be configured for egress untagged.
++ */
++ if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
++ !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
++ return -EINVAL;
++
+ if (vlan->vid_end >= dev->num_vlans)
+ return -ERANGE;
+
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0007-net-dsa-b53-Deny-enslaving-port-7-for-7278-into-a-br.patch b/target/linux/generic/backport-5.4/707-v5.7-0007-net-dsa-b53-Deny-enslaving-port-7-for-7278-into-a-br.patch
new file mode 100644
index 0000000000..0cddffa363
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0007-net-dsa-b53-Deny-enslaving-port-7-for-7278-into-a-br.patch
@@ -0,0 +1,31 @@
+From 31bfc2d42cae6e8b1440fc5db3f0aba6c5d7e602 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 30 Mar 2020 14:38:49 -0700
+Subject: [PATCH] net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
+
+On 7278, port 7 connects to the ASP which should only receive frames
+through the use of CFP rules, it is not desirable to have it be part of
+a bridge at all since that would make it pick up unwanted traffic that
+it may not even be able to filter or sustain.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1770,6 +1770,12 @@ int b53_br_join(struct dsa_switch *ds, i
+ u16 pvlan, reg;
+ unsigned int i;
+
++ /* On 7278, port 7 which connects to the ASP should only receive
++ * traffic from matching CFP rules.
++ */
++ if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
++ return -EINVAL;
++
+ /* Make this port leave the all VLANs join since we will have proper
+ * VLAN entries from now on
+ */
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0008-net-dsa-bcm_sf2-Disable-learning-for-ASP-port.patch b/target/linux/generic/backport-5.4/707-v5.7-0008-net-dsa-bcm_sf2-Disable-learning-for-ASP-port.patch
new file mode 100644
index 0000000000..c3ba9ae37a
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0008-net-dsa-bcm_sf2-Disable-learning-for-ASP-port.patch
@@ -0,0 +1,36 @@
+From 8b6b208b69917d88bb3e087f8c9e61c6b05ed571 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 30 Mar 2020 14:38:50 -0700
+Subject: [PATCH] net: dsa: bcm_sf2: Disable learning for ASP port
+
+We don't want to enable learning for the ASP port since it only receives
+directed traffic, this allows us to bypass ARL-driven forwarding rules
+which could conflict with Broadcom tags and/or CFP forwarding.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/bcm_sf2.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/bcm_sf2.c
++++ b/drivers/net/dsa/bcm_sf2.c
+@@ -173,9 +173,17 @@ static int bcm_sf2_port_setup(struct dsa
+ core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+
+ /* Enable Broadcom tags for that port if requested */
+- if (priv->brcm_tag_mask & BIT(port))
++ if (priv->brcm_tag_mask & BIT(port)) {
+ b53_brcm_hdr_setup(ds, port);
+
++ /* Disable learning on ASP port */
++ if (port == 7) {
++ reg = core_readl(priv, CORE_DIS_LEARN);
++ reg |= BIT(port);
++ core_writel(priv, reg, CORE_DIS_LEARN);
++ }
++ }
++
+ /* Configure Traffic Class to QoS mapping, allow each priority to map
+ * to a different queue number
+ */
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0009-net-dsa-bcm_sf2-Check-earlier-for-FLOW_EXT-and-FLOW_.patch b/target/linux/generic/backport-5.4/707-v5.7-0009-net-dsa-bcm_sf2-Check-earlier-for-FLOW_EXT-and-FLOW_.patch
new file mode 100644
index 0000000000..5c445ee9b9
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0009-net-dsa-bcm_sf2-Check-earlier-for-FLOW_EXT-and-FLOW_.patch
@@ -0,0 +1,33 @@
+From 5ae8c0d51ace3bdbfb89c27e7661f081cc9287de Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 30 Mar 2020 14:38:51 -0700
+Subject: [PATCH] net: dsa: bcm_sf2: Check earlier for FLOW_EXT and
+ FLOW_MAC_EXT
+
+We do not currently support matching on FLOW_EXT or FLOW_MAC_EXT, but we
+were not checking for those bits being set in the flow specification.
+
+The check for FLOW_EXT and FLOW_MAC_EXT are separated out because a
+subsequent commit will add support for matching VLAN TCI which are
+covered by FLOW_EXT.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/bcm_sf2_cfp.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/bcm_sf2_cfp.c
++++ b/drivers/net/dsa/bcm_sf2_cfp.c
+@@ -878,8 +878,9 @@ static int bcm_sf2_cfp_rule_set(struct d
+ int ret = -EINVAL;
+
+ /* Check for unsupported extensions */
+- if ((fs->flow_type & FLOW_EXT) && (fs->m_ext.vlan_etype ||
+- fs->m_ext.data[1]))
++ if ((fs->flow_type & FLOW_EXT) ||
++ (fs->flow_type & FLOW_MAC_EXT) ||
++ fs->m_ext.data[1])
+ return -EINVAL;
+
+ if (fs->location != RX_CLS_LOC_ANY &&
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0010-net-dsa-bcm_sf2-Move-writing-of-CFP_DATA-5-into-slic.patch b/target/linux/generic/backport-5.4/707-v5.7-0010-net-dsa-bcm_sf2-Move-writing-of-CFP_DATA-5-into-slic.patch
new file mode 100644
index 0000000000..93b47aff71
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0010-net-dsa-bcm_sf2-Move-writing-of-CFP_DATA-5-into-slic.patch
@@ -0,0 +1,131 @@
+From c2d639d118d27d6419f5848675ed5c112a86910f Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 30 Mar 2020 14:38:52 -0700
+Subject: [PATCH] net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing
+ functions
+
+In preparation for matching VLANs, move the writing of CFP_DATA(5) into
+the IPv4 and IPv6 slicing logic since they are part of the per-flow
+configuration.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/bcm_sf2_cfp.c | 64 +++++++++++++++++------------------
+ 1 file changed, 32 insertions(+), 32 deletions(-)
+
+--- a/drivers/net/dsa/bcm_sf2_cfp.c
++++ b/drivers/net/dsa/bcm_sf2_cfp.c
+@@ -261,11 +261,20 @@ static int bcm_sf2_cfp_act_pol_set(struc
+ static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
+ struct flow_dissector_key_ipv4_addrs *addrs,
+ struct flow_dissector_key_ports *ports,
+- unsigned int slice_num,
++ unsigned int slice_num, u8 num_udf,
+ bool mask)
+ {
+ u32 reg, offset;
+
++ /* UDF_Valid[7:0] [31:24]
++ * S-Tag [23:8]
++ * C-Tag [7:0]
++ */
++ if (mask)
++ core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
++ else
++ core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5));
++
+ /* C-Tag [31:24]
+ * UDF_n_A8 [23:8]
+ * UDF_n_A7 [7:0]
+@@ -421,18 +430,11 @@ static int bcm_sf2_cfp_ipv4_rule_set(str
+ core_writel(priv, layout->udfs[slice_num].mask_value |
+ udf_upper_bits(num_udf), CORE_CFP_MASK_PORT(6));
+
+- /* UDF_Valid[7:0] [31:24]
+- * S-Tag [23:8]
+- * C-Tag [7:0]
+- */
+- core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5));
+-
+- /* Mask all but valid UDFs */
+- core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
+-
+ /* Program the match and the mask */
+- bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, slice_num, false);
+- bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, SLICE_NUM_MASK, true);
++ bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, slice_num,
++ num_udf, false);
++ bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, SLICE_NUM_MASK,
++ num_udf, true);
+
+ /* Insert into TCAM now */
+ bcm_sf2_cfp_rule_addr_set(priv, rule_index);
+@@ -468,11 +470,20 @@ out_err_flow_rule:
+
+ static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
+ const __be32 *ip6_addr, const __be16 port,
+- unsigned int slice_num,
++ unsigned int slice_num, u32 udf_bits,
+ bool mask)
+ {
+ u32 reg, tmp, val, offset;
+
++ /* UDF_Valid[7:0] [31:24]
++ * S-Tag [23:8]
++ * C-Tag [7:0]
++ */
++ if (mask)
++ core_writel(priv, udf_bits << 24, CORE_CFP_MASK_PORT(5));
++ else
++ core_writel(priv, udf_bits << 24, CORE_CFP_DATA_PORT(5));
++
+ /* C-Tag [31:24]
+ * UDF_n_B8 [23:8] (port)
+ * UDF_n_B7 (upper) [7:0] (addr[15:8])
+@@ -704,20 +715,13 @@ static int bcm_sf2_cfp_ipv6_rule_set(str
+ reg = layout->udfs[slice_num].mask_value | udf_upper_bits(num_udf);
+ core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
+
+- /* UDF_Valid[7:0] [31:24]
+- * S-Tag [23:8]
+- * C-Tag [7:0]
+- */
+- core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5));
+-
+- /* Mask all but valid UDFs */
+- core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
+-
+ /* Slice the IPv6 source address and port */
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->src.in6_u.u6_addr32,
+- ports.key->src, slice_num, false);
++ ports.key->src, slice_num,
++ udf_lower_bits(num_udf), false);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->src.in6_u.u6_addr32,
+- ports.mask->src, SLICE_NUM_MASK, true);
++ ports.mask->src, SLICE_NUM_MASK,
++ udf_lower_bits(num_udf), true);
+
+ /* Insert into TCAM now because we need to insert a second rule */
+ bcm_sf2_cfp_rule_addr_set(priv, rule_index[0]);
+@@ -768,16 +772,12 @@ static int bcm_sf2_cfp_ipv6_rule_set(str
+ udf_lower_bits(num_udf) << 8;
+ core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
+
+- /* Don't care */
+- core_writel(priv, 0, CORE_CFP_DATA_PORT(5));
+-
+- /* Mask all */
+- core_writel(priv, 0, CORE_CFP_MASK_PORT(5));
+-
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->dst.in6_u.u6_addr32,
+- ports.key->dst, slice_num, false);
++ ports.key->dst, slice_num,
++ 0, false);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->dst.in6_u.u6_addr32,
+- ports.key->dst, SLICE_NUM_MASK, true);
++ ports.key->dst, SLICE_NUM_MASK,
++ 0, true);
+
+ /* Insert into TCAM now */
+ bcm_sf2_cfp_rule_addr_set(priv, rule_index[1]);
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0011-net-dsa-bcm_sf2-Add-support-for-matching-VLAN-TCI.patch b/target/linux/generic/backport-5.4/707-v5.7-0011-net-dsa-bcm_sf2-Add-support-for-matching-VLAN-TCI.patch
new file mode 100644
index 0000000000..71de609870
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0011-net-dsa-bcm_sf2-Add-support-for-matching-VLAN-TCI.patch
@@ -0,0 +1,181 @@
+From 7555020c44db75a0d934dffc0aa6c678b52b2a13 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 30 Mar 2020 14:38:53 -0700
+Subject: [PATCH] net: dsa: bcm_sf2: Add support for matching VLAN TCI
+
+Update relevant code paths to support the programming and matching of
+VLAN TCI, this is the only member of the ethtool_flow_ext that we can
+match, the switch does not permit matching the VLAN Ethernet Type field.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/bcm_sf2_cfp.c | 53 +++++++++++++++++++++++++----------
+ 1 file changed, 38 insertions(+), 15 deletions(-)
+
+--- a/drivers/net/dsa/bcm_sf2_cfp.c
++++ b/drivers/net/dsa/bcm_sf2_cfp.c
+@@ -261,6 +261,7 @@ static int bcm_sf2_cfp_act_pol_set(struc
+ static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
+ struct flow_dissector_key_ipv4_addrs *addrs,
+ struct flow_dissector_key_ports *ports,
++ const __be16 vlan_tci,
+ unsigned int slice_num, u8 num_udf,
+ bool mask)
+ {
+@@ -270,16 +271,17 @@ static void bcm_sf2_cfp_slice_ipv4(struc
+ * S-Tag [23:8]
+ * C-Tag [7:0]
+ */
++ reg = udf_lower_bits(num_udf) << 24 | be16_to_cpu(vlan_tci) >> 8;
+ if (mask)
+- core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
++ core_writel(priv, reg, CORE_CFP_MASK_PORT(5));
+ else
+- core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_DATA_PORT(5));
++ core_writel(priv, reg, CORE_CFP_DATA_PORT(5));
+
+ /* C-Tag [31:24]
+ * UDF_n_A8 [23:8]
+ * UDF_n_A7 [7:0]
+ */
+- reg = 0;
++ reg = (u32)(be16_to_cpu(vlan_tci) & 0xff) << 24;
+ if (mask)
+ offset = CORE_CFP_MASK_PORT(4);
+ else
+@@ -345,6 +347,7 @@ static int bcm_sf2_cfp_ipv4_rule_set(str
+ struct ethtool_rx_flow_spec *fs)
+ {
+ struct ethtool_rx_flow_spec_input input = {};
++ __be16 vlan_tci = 0 , vlan_m_tci = 0xffff;
+ const struct cfp_udf_layout *layout;
+ unsigned int slice_num, rule_index;
+ struct ethtool_rx_flow_rule *flow;
+@@ -369,6 +372,12 @@ static int bcm_sf2_cfp_ipv4_rule_set(str
+
+ ip_frag = !!(be32_to_cpu(fs->h_ext.data[0]) & 1);
+
++ /* Extract VLAN TCI */
++ if (fs->flow_type & FLOW_EXT) {
++ vlan_tci = fs->h_ext.vlan_tci;
++ vlan_m_tci = fs->m_ext.vlan_tci;
++ }
++
+ /* Locate the first rule available */
+ if (fs->location == RX_CLS_LOC_ANY)
+ rule_index = find_first_zero_bit(priv->cfp.used,
+@@ -431,10 +440,10 @@ static int bcm_sf2_cfp_ipv4_rule_set(str
+ udf_upper_bits(num_udf), CORE_CFP_MASK_PORT(6));
+
+ /* Program the match and the mask */
+- bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, slice_num,
+- num_udf, false);
+- bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, SLICE_NUM_MASK,
+- num_udf, true);
++ bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, vlan_tci,
++ slice_num, num_udf, false);
++ bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, vlan_m_tci,
++ SLICE_NUM_MASK, num_udf, true);
+
+ /* Insert into TCAM now */
+ bcm_sf2_cfp_rule_addr_set(priv, rule_index);
+@@ -470,6 +479,7 @@ out_err_flow_rule:
+
+ static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
+ const __be32 *ip6_addr, const __be16 port,
++ const __be16 vlan_tci,
+ unsigned int slice_num, u32 udf_bits,
+ bool mask)
+ {
+@@ -479,10 +489,11 @@ static void bcm_sf2_cfp_slice_ipv6(struc
+ * S-Tag [23:8]
+ * C-Tag [7:0]
+ */
++ reg = udf_bits << 24 | be16_to_cpu(vlan_tci) >> 8;
+ if (mask)
+- core_writel(priv, udf_bits << 24, CORE_CFP_MASK_PORT(5));
++ core_writel(priv, reg, CORE_CFP_MASK_PORT(5));
+ else
+- core_writel(priv, udf_bits << 24, CORE_CFP_DATA_PORT(5));
++ core_writel(priv, reg, CORE_CFP_DATA_PORT(5));
+
+ /* C-Tag [31:24]
+ * UDF_n_B8 [23:8] (port)
+@@ -490,6 +501,7 @@ static void bcm_sf2_cfp_slice_ipv6(struc
+ */
+ reg = be32_to_cpu(ip6_addr[3]);
+ val = (u32)be16_to_cpu(port) << 8 | ((reg >> 8) & 0xff);
++ val |= (u32)(be16_to_cpu(vlan_tci) & 0xff) << 24;
+ if (mask)
+ offset = CORE_CFP_MASK_PORT(4);
+ else
+@@ -598,6 +610,11 @@ static int bcm_sf2_cfp_rule_cmp(struct b
+
+ ret = memcmp(&rule->fs.h_u, &fs->h_u, fs_size);
+ ret |= memcmp(&rule->fs.m_u, &fs->m_u, fs_size);
++ /* Compare VLAN TCI values as well */
++ if (rule->fs.flow_type & FLOW_EXT) {
++ ret |= rule->fs.h_ext.vlan_tci != fs->h_ext.vlan_tci;
++ ret |= rule->fs.m_ext.vlan_tci != fs->m_ext.vlan_tci;
++ }
+ if (ret == 0)
+ break;
+ }
+@@ -611,6 +628,7 @@ static int bcm_sf2_cfp_ipv6_rule_set(str
+ struct ethtool_rx_flow_spec *fs)
+ {
+ struct ethtool_rx_flow_spec_input input = {};
++ __be16 vlan_tci = 0, vlan_m_tci = 0xffff;
+ unsigned int slice_num, rule_index[2];
+ const struct cfp_udf_layout *layout;
+ struct ethtool_rx_flow_rule *flow;
+@@ -634,6 +652,12 @@ static int bcm_sf2_cfp_ipv6_rule_set(str
+
+ ip_frag = !!(be32_to_cpu(fs->h_ext.data[0]) & 1);
+
++ /* Extract VLAN TCI */
++ if (fs->flow_type & FLOW_EXT) {
++ vlan_tci = fs->h_ext.vlan_tci;
++ vlan_m_tci = fs->m_ext.vlan_tci;
++ }
++
+ layout = &udf_tcpip6_layout;
+ slice_num = bcm_sf2_get_slice_number(layout, 0);
+ if (slice_num == UDF_NUM_SLICES)
+@@ -717,10 +741,10 @@ static int bcm_sf2_cfp_ipv6_rule_set(str
+
+ /* Slice the IPv6 source address and port */
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->src.in6_u.u6_addr32,
+- ports.key->src, slice_num,
++ ports.key->src, vlan_tci, slice_num,
+ udf_lower_bits(num_udf), false);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->src.in6_u.u6_addr32,
+- ports.mask->src, SLICE_NUM_MASK,
++ ports.mask->src, vlan_m_tci, SLICE_NUM_MASK,
+ udf_lower_bits(num_udf), true);
+
+ /* Insert into TCAM now because we need to insert a second rule */
+@@ -773,10 +797,10 @@ static int bcm_sf2_cfp_ipv6_rule_set(str
+ core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
+
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->dst.in6_u.u6_addr32,
+- ports.key->dst, slice_num,
++ ports.key->dst, 0, slice_num,
+ 0, false);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->dst.in6_u.u6_addr32,
+- ports.key->dst, SLICE_NUM_MASK,
++ ports.key->dst, 0, SLICE_NUM_MASK,
+ 0, true);
+
+ /* Insert into TCAM now */
+@@ -878,8 +902,7 @@ static int bcm_sf2_cfp_rule_set(struct d
+ int ret = -EINVAL;
+
+ /* Check for unsupported extensions */
+- if ((fs->flow_type & FLOW_EXT) ||
+- (fs->flow_type & FLOW_MAC_EXT) ||
++ if ((fs->flow_type & FLOW_MAC_EXT) ||
+ fs->m_ext.data[1])
+ return -EINVAL;
+
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0012-net-dsa-bcm_sf2-Support-specifying-VLAN-tag-egress-r.patch b/target/linux/generic/backport-5.4/707-v5.7-0012-net-dsa-bcm_sf2-Support-specifying-VLAN-tag-egress-r.patch
new file mode 100644
index 0000000000..174d76c7e6
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.7-0012-net-dsa-bcm_sf2-Support-specifying-VLAN-tag-egress-r.patch
@@ -0,0 +1,94 @@
+From 8b3abe304c5f1057b7bac70fd5576dfa67e3e2b3 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 30 Mar 2020 14:38:54 -0700
+Subject: [PATCH] net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
+
+The port to which the ASP is connected on 7278 is not capable of
+processing VLAN tags as part of the Ethernet frame, so allow an user to
+configure the egress VLAN policy they want to see applied by purposing
+the h_ext.data[1] field. Bit 0 is used to indicate that 0=tagged,
+1=untagged.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/bcm_sf2_cfp.c | 40 +++++++++++++++++++++++++++++++++--
+ 1 file changed, 38 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/bcm_sf2_cfp.c
++++ b/drivers/net/dsa/bcm_sf2_cfp.c
+@@ -13,6 +13,8 @@
+ #include <net/dsa.h>
+ #include <linux/bitmap.h>
+ #include <net/flow_offload.h>
++#include <net/switchdev.h>
++#include <uapi/linux/if_bridge.h>
+
+ #include "bcm_sf2.h"
+ #include "bcm_sf2_regs.h"
+@@ -847,7 +849,9 @@ static int bcm_sf2_cfp_rule_insert(struc
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ s8 cpu_port = ds->ports[port].cpu_dp->index;
+ __u64 ring_cookie = fs->ring_cookie;
++ struct switchdev_obj_port_vlan vlan;
+ unsigned int queue_num, port_num;
++ u16 vid;
+ int ret;
+
+ /* This rule is a Wake-on-LAN filter and we must specifically
+@@ -867,6 +871,34 @@ static int bcm_sf2_cfp_rule_insert(struc
+ dsa_is_cpu_port(ds, port_num)) ||
+ port_num >= priv->hw_params.num_ports)
+ return -EINVAL;
++
++ /* If the rule is matching a particular VLAN, make sure that we honor
++ * the matching and have it tagged or untagged on the destination port,
++ * we do this on egress with a VLAN entry. The egress tagging attribute
++ * is expected to be provided in h_ext.data[1] bit 0. A 1 means untagged,
++ * a 0 means tagged.
++ */
++ if (fs->flow_type & FLOW_EXT) {
++ /* We cannot support matching multiple VLAN IDs yet */
++ if ((be16_to_cpu(fs->m_ext.vlan_tci) & VLAN_VID_MASK) !=
++ VLAN_VID_MASK)
++ return -EINVAL;
++
++ vid = be16_to_cpu(fs->h_ext.vlan_tci) & VLAN_VID_MASK;
++ vlan.vid_begin = vid;
++ vlan.vid_end = vid;
++ if (cpu_to_be32(fs->h_ext.data[1]) & 1)
++ vlan.flags = BRIDGE_VLAN_INFO_UNTAGGED;
++ else
++ vlan.flags = 0;
++
++ ret = ds->ops->port_vlan_prepare(ds, port_num, &vlan);
++ if (ret)
++ return ret;
++
++ ds->ops->port_vlan_add(ds, port_num, &vlan);
++ }
++
+ /*
+ * We have a small oddity where Port 6 just does not have a
+ * valid bit here (so we substract by one).
+@@ -902,14 +934,18 @@ static int bcm_sf2_cfp_rule_set(struct d
+ int ret = -EINVAL;
+
+ /* Check for unsupported extensions */
+- if ((fs->flow_type & FLOW_MAC_EXT) ||
+- fs->m_ext.data[1])
++ if (fs->flow_type & FLOW_MAC_EXT)
+ return -EINVAL;
+
+ if (fs->location != RX_CLS_LOC_ANY &&
+ fs->location > bcm_sf2_cfp_rule_size(priv))
+ return -EINVAL;
+
++ if ((fs->flow_type & FLOW_EXT) &&
++ !(ds->ops->port_vlan_prepare || ds->ops->port_vlan_add ||
++ ds->ops->port_vlan_del))
++ return -EOPNOTSUPP;
++
+ if (fs->location != RX_CLS_LOC_ANY &&
+ test_bit(fs->location, priv->cfp.used))
+ return -EBUSY;
diff --git a/target/linux/generic/backport-5.4/707-v5.7-0016-net-dsa-b53-Fix-valid-setting-for-MDB-entries.patch b/target/linux/generic/backport-5.4/707-v5.7-0016-net-dsa-b53-Fix-valid-setting-for-MDB-entries.patch
index 8225ca1d29..f77aee1a87 100644
--- a/target/linux/generic/backport-5.4/707-v5.7-0016-net-dsa-b53-Fix-valid-setting-for-MDB-entries.patch
+++ b/target/linux/generic/backport-5.4/707-v5.7-0016-net-dsa-b53-Fix-valid-setting-for-MDB-entries.patch
@@ -20,7 +20,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1577,7 +1577,6 @@ static int b53_arl_op(struct b53_device
+@@ -1600,7 +1600,6 @@ static int b53_arl_op(struct b53_device
ent.is_valid = !!(ent.port);
}
diff --git a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
index 6fc9a1643e..b25f3c0d11 100644
--- a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
+++ b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
@@ -12,7 +12,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1297,7 +1297,9 @@ EXPORT_SYMBOL(b53_phylink_mac_link_down)
+@@ -1312,7 +1312,9 @@ EXPORT_SYMBOL(b53_phylink_mac_link_down)
void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
@@ -38,7 +38,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
const struct switchdev_obj_port_vlan *vlan);
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -653,7 +653,9 @@ static void bcm_sf2_sw_mac_link_down(str
+@@ -661,7 +661,9 @@ static void bcm_sf2_sw_mac_link_down(str
static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,