diff options
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 4 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts | 37 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca9533_tplink_tl-wr810n-v2.dts | 12 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi | 113 | ||||
| -rw-r--r-- | target/linux/ath79/image/generic-tp-link.mk | 17 |
5 files changed, 182 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 906ccd753f..8e92c2f780 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -91,7 +91,9 @@ ath79_setup_interfaces() ;; glinet,ar300m|\ glinet,gl-ar150|\ - glinet,gl-x750) + glinet,gl-x750|\ + tplink,tl-wr810n-v1|\ + tplink,tl-wr810n-v2) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; glinet,ar750s) diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts new file mode 100644 index 0000000000..7d77352f84 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca953x_tplink_tl-wr810n.dtsi" + +/ { + compatible = "tplink,tl-wr810n-v1", "qca,qca9531"; + model = "TP-Link TL-WR810N v1"; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + vbus-supply = <®_usb_vbus>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr810n-v2.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr810n-v2.dts new file mode 100644 index 0000000000..a98228d358 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr810n-v2.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca953x_tplink_tl-wr810n.dtsi" + +/ { + compatible = "tplink,tl-wr810n-v2", "qca,qca9533"; + model = "TP-Link TL-WR810N v2"; +}; diff --git a/target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi b/target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi new file mode 100644 index 0000000000..d4faee7506 --- /dev/null +++ b/target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca953x.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + led_system: system { + label = "tp-link:blue:system"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + switch_b0 { + label = "switch_b0"; + linux,input-type = <EV_SW>; + linux,code = <BTN_0>; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + + switch_b1 { + label = "switch_b1"; + linux,input-type = <EV_SW>; + linux,code = <BTN_1>; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x020000 0x7d0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð1 { + mtd-mac-address = <&uboot 0x1fc00>; +}; + +ð0 { + status = "okay"; + phy-handle = <&swphy4>; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <1>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 0fca5cf679..093ac7293d 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -123,6 +123,23 @@ define Device/tplink_tl-wr1043nd-v1 endef TARGET_DEVICES += tplink_tl-wr1043nd-v1 +define Device/tplink_tl-wr810n-v1 + $(Device/tplink-8mlzma) + ATH_SOC := qca9531 + DEVICE_TITLE := TP-LINK TL-WR810N v1 + TPLINK_HWID := 0x8100001 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += tplink_tl-wr810n-v1 + +define Device/tplink_tl-wr810n-v2 + $(Device/tplink-8mlzma) + ATH_SOC := qca9533 + DEVICE_TITLE := TP-LINK TL-WR810N v2 + TPLINK_HWID := 0x8100002 +endef +TARGET_DEVICES += tplink_tl-wr810n-v2 + define Device/tplink_tl-wr842n-v1 $(Device/tplink-8m) ATH_SOC := ar7241 |