diff options
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/brcm63xx/image/Makefile | 757 |
1 files changed, 497 insertions, 260 deletions
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index b9f2c22875..9efec87f34 100755 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2006-2011 OpenWrt.org +# Copyright (C) 2006-2015 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -26,6 +26,73 @@ RELOCATE_MAKEOPTS= \ CROSS_COMPILE=$(TARGET_CROSS) \ LZMA_TEXT_START=$(LOADER_ENTRY) +define Build/Compile + rm -rf $(KDIR)/relocate + $(CP) ../../generic/image/relocate $(KDIR) + $(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS) +endef + +### Kernel scripts ### +define Build/append-dtb + $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb) + cat $@.dtb >> $@ +endef + +define Build/gzip + gzip -9 -c $@ > $@.gz + mv $@.gz $@ +endef + +define Build/hcs-initramfs + $(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_bytes=$(HCS_MAGIC_BYTES) \ + --rev_maj=$(HCS_REV_MAJ) --rev_min=$(HCS_REV_MIN) --input_file=$@ \ + --output_file=$@.hcs --ldaddress=$(LOADADDR) + mv $@.hcs $@ +endef + +define Build/loader-lzma + rm -rf $@.src + $(MAKE) -C lzma-loader \ + $(LOADER_MAKEOPTS) \ + PKG_BUILD_DIR="$@.src" \ + TARGET_DIR="$(dir $@)" \ + LOADER_DATA="$@" \ + LOADER_NAME="$(notdir $@)" \ + compile loader.$(1) + mv "$@.$(1)" "$@" + rm -rf $@.src +endef + +define Build/lzma + # CFE is a LZMA nazi! It took me hours to find out the parameters! + # Also I think lzma has a bug cause it generates different output depending on + # if you use stdin / stdout or not. Use files instead of stdio here, cause + # otherwise CFE will complain and not boot the image. + $(STAGING_DIR_HOST)/bin/lzma e $@ -d22 -fb64 -a1 $@.lzma + mv $@.lzma $@ +endef + +define Build/lzma-cfe + # Strip out the length, CFE doesn't like this + dd if=$@ of=$@.lzma.cfe bs=5 count=1 + dd if=$@ of=$@.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc + mv $@.lzma.cfe $@ +endef + +define Build/relocate-kernel + # CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed + # kernel might get larger than that, so let CFE unpack and load at a + # higher address and make the kernel relocate itself to the expected + # location. + ( \ + dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \ + perl -e '@s = stat("$@"); print pack("N", @s[7])' && \ + cat $@ \ + ) > $@.relocate + mv $@.relocate $@ +endef + +### Image scripts ### define rootfspad/jffs2-128k --align-rootfs endef @@ -39,379 +106,549 @@ define Image/LimitName16 $(shell expr substr "$(1)" 1 16) endef -TARGET_DTBS:= -TARGET_IMAGES:= - -TARGET_Default_DTBS:= -TARGET_Default_IMAGES:= +define Image/FileSystemStrip +$(subst root.,,$(notdir $(1))) +endef -define Image/Build/CFEDTB - # Generate the tagged image - $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \ - --output $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-cfe.bin \ - --boardid $(4) --chipid $(5) --entry $(LOADER_ENTRY) \ - --load-addr $(LOADER_ENTRY) --info1 "-$(call Image/LimitName16,$(2))" \ - $(call rootfspad/$(1)) \ - --info2 $(1) $(6) +define Build/cfe-bin + $(STAGING_DIR_HOST)/bin/imagetag -i $(word 1,$^) -f $(word 2,$^) \ + --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \ + --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \ + --info1 "$(call Image/LimitName16,$(DEVICE_NAME))" \ + --info2 "$(call Image/FileSystemStrip,$(word 2,$^))" \ + $(call rootfspad/$(call Image/FileSystemStrip,$(word 2,$^))) \ + $(CFE_EXTRAS) $(1) endef -define Image/Build/OLDCFEDTB - # Generate the tagged image +define Build/cfe-old-bin $(TOPDIR)/scripts/brcmImage.pl -t -p \ - -b $(4) -c $(5) -e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \ - -k $(KDIR)/vmlinux-$(3).lzma.cfe -r $(KDIR)/root.$(1) \ - -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-cfe.bin $(6) -endef - -define Image/Build/SPW303VCFEDTB - # Generate the tagged image - $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \ - --output $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).tmp \ - --boardid $(4) --chipid $(5) --entry $(LOADER_ENTRY) \ - $(call rootfspad/$(1)) \ - --load-addr $(LOADER_ENTRY) $(6) - # Fix up header - $(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).tmp \ - -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-cfe-sysupgrade.bin - $(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-cfe-sysupgrade.bin \ - -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-cfe-factory.bin - rm -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).tmp -endef - -define Image/Build/ZYXCFEDTB - # Generate the tagged image - $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \ - --output $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).tmp \ - --boardid $(4) --chipid $(5) --entry $(LOADER_ENTRY) \ - --load-addr $(LOADER_ENTRY) --info1 "-$(call Image/LimitName16,$(2))" \ - $(call rootfspad/$(1)) \ - --info2 $(1) $(6) - # Fix up header - $(STAGING_DIR_HOST)/bin/zyxbcm -i $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).tmp \ - -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-zyxcfe.bin - rm -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).tmp -endef - -define Image/Build/RedBootDTB + -o $@ -b $(CFE_BOARD_ID) -c $(CFE_CHIP_ID) \ + -e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \ + -k $(word 1,$^) -r $(word 2,$^) \ + $(CFE_EXTRAS) +endef + +define Build/cfe-spw303v-bin + $(STAGING_DIR_HOST)/bin/imagetag -i $(word 1,$^) -f $(word 2,$^) \ + --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \ + --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \ + $(call rootfspad/$(call Image/FileSystemStrip,$(word 2,$^))) \ + $(CFE_EXTRAS) +endef + +define Build/netgear-chk + $(STAGING_DIR_HOST)/bin/mkchkimg -o $@.netgear -k $@ \ + -b $(NETGEAR_ID) -r $(NETGEAR_REGION) + mv $@.netgear $@ +endef + +define Build/spw303v-bin + $(STAGING_DIR_HOST)/bin/spw303v -i $@ -o $@.spw303v + mv $@.spw303v $@ +endef + +define Build/xor-image + $(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor + mv $@.xor $@ +endef + +define Build/zyxel-bin + $(STAGING_DIR_HOST)/bin/zyxbcm -i $@ -o $@.zyxel + mv $@.zyxel $@ +endef + +define Build/redboot-bin # Prepare kernel and rootfs - cat $(KDIR)/vmlinux $(DTS_DIR)/$(3).dtb > $(KDIR)/vmlinux-$(3) - gzip -9n -c $(KDIR)/vmlinux-$(3) > $(KDIR)/vmlinux-$(3).bin.gz - dd if=$(KDIR)/vmlinux-$(3).bin.gz of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-vmlinux.gz bs=65536 conv=sync - dd if=$(KDIR)/root.squashfs of="$(BIN_DIR)/$(IMG_PREFIX)-$(2)-root.squashfs" bs=64k conv=sync - echo -ne \\xDE\\xAD\\xC0\\xDE >> "$(BIN_DIR)/$(IMG_PREFIX)-$(2)-root.squashfs" + dd if=$(word 1,$^) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz bs=65536 conv=sync + dd if=$(word 2,$^) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^)) bs=64k conv=sync + echo -ne \\xDE\\xAD\\xC0\\xDE >> $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^)) # Generate the scripted image $(TOPDIR)/scripts/redboot-script.pl \ - -k $(BIN_DIR)/$(IMG_PREFIX)-$(2)-vmlinux.gz \ - -r $(BIN_DIR)/$(IMG_PREFIX)-$(2)-root.squashfs \ + -k $(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz \ + -r $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^)) \ -a $(strip $(LOADADDR)) -f 0xbe430000 -l 0x7c0000 \ - -s 0x1000 -t 20 -o $(BIN_DIR)/redbootscript - dd if="$(BIN_DIR)/redbootscript" of="$(BIN_DIR)/redbootscript.padded" bs=4096 conv=sync + -s 0x1000 -t 20 -o $@.redbootscript + dd if="$@.redbootscript" of="$@.redbootscript.padded" bs=4096 conv=sync cat \ - "$(BIN_DIR)/redbootscript.padded" \ - "$(BIN_DIR)/$(IMG_PREFIX)-$(2)-vmlinux.gz" \ - "$(BIN_DIR)/$(IMG_PREFIX)-$(2)-root.squashfs" \ - > "$(BIN_DIR)/$(IMG_PREFIX)-$(2)-redboot.bin" - rm -f $(BIN_DIR)/redbootscript $(BIN_DIR)/redbootscript.padded - rm -f $(KDIR)/vmlinux-$(3) + "$@.redbootscript.padded" \ + "$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz" \ + "$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^))" \ + > "$@" endef -define Image/Build/HCSDTB - # Generate the image - $(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_byte=$(4) \ - --rev_maj=$(5) --rev_min=$(6) --input_file=$(KDIR)/$(7) \ - --output_file=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).bin \ - --ldaddress=$(LOADADDR) +# Shared device definition: applies to every defined device +define Device/Default + PROFILES = Default $$(DEVICE_PROFILE) + KERNEL_INITRAMFS_IMAGE = $$(KERNEL_INITRAMFS_PREFIX).elf + DEVICE_PROFILE := + DEVICE_NAME := + DEVICE_DTS := +endef +DEVICE_VARS += DEVICE_PROFILE DEVICE_NAME DEVICE_DTS + +# BCM33xx HCS devices: only generates ramdisks (unsupported bin images) +define Device/bcm33xxHcsRamdisk + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma bin | hcs-initramfs + IMAGES := + HCS_MAGIC_BYTES := + HCS_REV_MIN := + HCS_REV_MAJ := endef +DEVICE_VARS += HCS_MAGIC_BYTES HCS_REV_MIN HCS_REV_MAJ -define Image/Build/ChkDTB - # Generate Netgear factory image - $(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.chk \ - -k $(BIN_DIR)/$(IMG_PREFIX)-$(4)-$(1)-cfe.bin -b $(5) -r $(6) +# Shared BCM63xx CFE device definitios +define Device/bcm63xxCfeCommon + FILESYSTEMS := squashfs jffs2-64k jffs2-128k + KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | lzma-cfe + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf endef -define Image/Build/Dummy - # for boards without a flashable image yet - true +# BCM63xx CFE devices: only generates ramdisks (unsupported bin images) +define Device/bcm63xxCfeRamdisk + $(Device/bcm63xxCfeCommon) + IMAGES := endef -define Build/Clean - $(MAKE) -C lzma-loader clean +# BCM63xx CFE devices: both ramdisks and parallel/spi bin images +# New versions of CFE bootloader compatible with imagetag +define Device/bcm63xxCfe + $(Device/bcm63xxCfeCommon) + IMAGES := cfe.bin + IMAGE/cfe.bin := cfe-bin + CFE_BOARD_ID := + CFE_CHIP_ID := + CFE_EXTRAS := +endef +DEVICE_VARS += CFE_BOARD_ID CFE_CHIP_ID CFE_EXTRAS + +# BCM63xx CFE BC221 devices: both ramdisks and parallel/spi bin images +# Generates a generic image and a layout version 5 image +define Device/bcm63xxCfeBc221 + $(Device/bcm63xxCfeCommon) + IMAGES := cfe.bin cfe-bc221.bin + IMAGE/cfe.bin := cfe-bin + IMAGE/cfe-bc221.bin := cfe-bin --layoutver 5 + CFE_BOARD_ID := + CFE_CHIP_ID := + CFE_EXTRAS := endef -define Image/PrepareLoader - # Standard LZMA kernel - $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma +# BCM63xx CFE MultiFlash devices: both ramdisks and parallel/spi bin images +# Generates generic images padded for 4M/8M/16M flashes +define Device/bcm63xxCfeMultiFlash + $(Device/bcm63xxCfeCommon) + IMAGES := cfe-4M.bin cfe-8M.bin cfe-16M.bin + IMAGE/cfe-4M.bin := cfe-bin --pad 2 + IMAGE/cfe-8M.bin := cfe-bin --pad 4 + IMAGE/cfe-16M.bin := cfe-bin --pad 8 + CFE_BOARD_ID := + CFE_CHIP_ID := + CFE_EXTRAS := +endef - # Build the LZMA loader - rm -rf $(KDIR)/lzma-loader - $(MAKE) -C lzma-loader \ - $(LOADER_MAKEOPTS) \ - BUILD_DIR="$(KDIR)" \ - TARGET_DIR="$(2)" \ - LOADER_DATA="$(KDIR)/vmlinux$(1).lzma" \ - LOADER=$(IMG_PREFIX)-loader$(1) \ - compile $(3) +# BCM63xx CFE NETGEAR devices: both ramdisks and parallel/spi bin images +# factory.chk: netgear images for bootloader/original firmware upgrades +# sysupgrade.bin: openwrt images for sysupgrades +define Device/bcm63xxCfeNetgear + $(Device/bcm63xxCfeCommon) + IMAGES := factory.chk sysupgrade.bin + IMAGE/factory.chk := cfe-bin | netgear-chk + IMAGE/sysupgrade.bin := cfe-bin + CFE_BOARD_ID := + CFE_CHIP_ID := + CFE_EXTRAS := + NETGEAR_ID := + NETGEAR_REGION := +endef +DEVICE_VARS += NETGEAR_ID NETGEAR_REGION + +# BCM63xx Old CFE devices: both ramdisks and parallel/spi bin images +# Old versions of CFE bootloader not compatible with imagetag +define Device/bcm63xxCfeOld + $(Device/bcm63xxCfeCommon) + IMAGES := cfe-old.bin + IMAGE/cfe-old.bin := cfe-old-bin + CFE_BOARD_ID := + CFE_CHIP_ID := + CFE_EXTRAS := +endef - rm -f $(KDIR)/vmlinux$(1).lzma +# BCM63xx CFE SPW303V devices: both ramdisks and parallel/spi bin images +# factory.bin: SPW303V images for bootloader/original firmware upgrades +# sysupgrade.bin: openwrt images for sysupgrades +define Device/bcm63xxCfeSpw303v + $(Device/bcm63xxCfeCommon) + IMAGES := factory.bin sysupgrade.bin + IMAGE/factory.bin := cfe-spw303v-bin | spw303v-bin | xor-image + IMAGE/sysupgrade.bin := cfe-spw303v-bin | spw303v-bin + CFE_BOARD_ID := + CFE_CHIP_ID := + CFE_EXTRAS := endef -define Image/PrepareLoaderDTB - # append dtb to vmlinux, then build a standard LZMA loader - cat $(KDIR)/vmlinux$(1) $(DTS_DIR)/$(2).dtb > $(KDIR)/vmlinux$(1)-$(2) - $(call Image/PrepareLoader,$(1)-$(2),$(3),$(4)) - rm -f $(KDIR)/vmlinux$(1)-$(2) +# BCM63xx CFE ZyXEL devices: both ramdisks and parallel/spi bin images +# factory.bin: ZyXEL specific CFE images (sysupgrade compatible) +define Device/bcm63xxCfeZyxel + $(Device/bcm63xxCfeCommon) + IMAGES := factory.bin + IMAGE/factory.bin := cfe-bin | zyxel-bin + CFE_BOARD_ID := + CFE_CHIP_ID := + CFE_EXTRAS := endef -define Image/PrepareCFELzmaKernel - # CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed - # kernel might get larger than that, so let CFE unpack and load at a - # higher address and make the kernel relocate itself to the expected - # location. - ( \ - dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \ - perl -e '@s = stat("$(KDIR)/vmlinux$(1)"); print pack("N", @s[7])' && \ - cat $(KDIR)/vmlinux$(1) \ - ) > $(KDIR)/vmlinux-relocate$(1) +# BCM63xx RedBoot devices: both ramdisks and parallel/spi bin images +# Generates images compatible with RedBoot bootloader +define Device/bcm63xxRedBoot + FILESYSTEMS := squashfs + KERNEL := kernel-bin | append-dtb | gzip + IMAGES := redboot.bin + IMAGE/redboot.bin := redboot-bin + REDBOOT_PREFIX := $$(IMAGE_PREFIX) +endef +DEVICE_VARS += REDBOOT_PREFIX + +### Device macros ### +# $(1) = profile +# $(2) = image name +# $(3) = dts +# $(4) = hcs magic bytes +# $(5) = hcs rev min +# $(6) = hcs rev major +define bcm33xxHcsRamdisk + define Device/$(2) + $$(Device/bcm33xxHcsRamdisk) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + HCS_MAGIC_BYTES := $(4) + HCS_REV_MIN := $(5) + HCS_REV_MAJ := $(6) + endef + TARGET_DEVICES += $(2) +endef - # CFE is a LZMA nazi! It took me hours to find out the parameters! - # Also I think lzma has a bug cause it generates different output depending on - # if you use stdin / stdout or not. Use files instead of stdio here, cause - # otherwise CFE will complain and not boot the image. - $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux-relocate$(1) $(KDIR)/vmlinux$(1).lzma.tmp +# $(1) = profile +# $(2) = image name +# $(3) = dts +define bcm63xxCfeRamdisk + define Device/$(2) + $$(Device/bcm63xxCfeRamdisk) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + endef + TARGET_DEVICES += $(2) +endef - # Strip out the length, CFE doesn't like this - dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe bs=5 count=1 - dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc - rm -f $(KDIR)/vmlinux$(1).lzma.tmp - rm -f $(KDIR)/vmlinux-relocate$(1) +# $(1) = profile +# $(2) = image name +# $(3) = dts +# $(4) = cfe board name +# $(5) = cfe chip id +# $(6) = cfe additional options +define bcm63xxCfe + define Device/$(2) + $$(Device/bcm63xxCfe) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + CFE_BOARD_ID := $(4) + CFE_CHIP_ID := $(5) + CFE_EXTRAS := $(6) + endef + TARGET_DEVICES += $(2) endef -define Image/PrepareCFELzmaKernelDTB - # compile the dts (the dtb will be later reused for the lzma loader) - $(call Image/BuildDTB,../dts/$(1).dts,$(DTS_DIR)/$(1).dtb) - cat $(KDIR)/vmlinux $(DTS_DIR)/$(1).dtb > $(KDIR)/vmlinux-$(1) - $(call Image/PrepareCFELzmaKernel,-$(1)) - rm -f $(KDIR)/vmlinux-$(1) +# $(1) = profile +# $(2) = image name +# $(3) = dts +# $(4) = cfe board name +# $(5) = cfe chip id +# $(6) = cfe additional options +define bcm63xxCfeMultiFlash + define Device/$(2) + $$(Device/bcm63xxCfeMultiFlash) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + CFE_BOARD_ID := $(4) + CFE_CHIP_ID := $(5) + CFE_EXTRAS := $(6) + endef + TARGET_DEVICES += $(2) endef -define Image/Prepare - # build relocation code first - rm -rf $(KDIR)/relocate - $(CP) ../../generic/image/relocate $(KDIR) - $(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS) +# $(1) = profile +# $(2) = image name +# $(3) = dts +# $(4) = cfe board name +# $(5) = cfe chip id +# $(6) = cfe additional options +define bcm63xxCfeBc221 + define Device/$(2) + $$(Device/bcm63xxCfeBc221) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + CFE_BOARD_ID := $(4) + CFE_CHIP_ID := $(5) + CFE_EXTRAS := $(6) + endef + TARGET_DEVICES += $(2) +endef - $(foreach board,$(sort $(TARGET_$(PROFILE)_DTBS)), $(call Image/PrepareCFELzmaKernelDTB,$(board))) - - ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) - $(foreach board,$(sort $(TARGET_$(PROFILE)_DTBS)), \ - $(call Image/PrepareLoaderDTB,-initramfs,$(board),$(BIN_DIR),loader.elf)) - ifneq (,$(findstring cvg834g,$(TARGET_$(PROFILE)_DTBS))) - $(call Image/PrepareLoaderDTB,-initramfs,cvg834g,$(KDIR),loader.bin) - endif - endif -endef - -define Image/Build/Initramfs - # Netgear CVG834G - ifneq (,$(findstring cvg834g,$(TARGET_$(PROFILE)_DTBS))) - $(call Image/Build/HCSDTB,initramfs,cvg834g,cvg834g,a020,0001,0022,$(IMG_PREFIX)-loader-initramfs-cvg834g.bin) - endif -endef - -# $(1) = Image build -# $(2) = Profile -# $(3) = imagename -# $(4) = dtb -# $(5) = boardname -# $(6) = chipid -# $(7) = additional options -define ImageDTB - define Image/Build/$(3) - $$(call Image/Build/$(1),$$(1),$(3),$(4),$(5),$(6),$(7),$(8)) +# $(1) = profile +# $(2) = image name +# $(3) = dts +# $(4) = cfe board name +# $(5) = cfe chip id +# $(6) = cfe additional options +# $(7) = netgear id +# $(8) = netgear region +define bcm63xxCfeNetgear + define Device/$(2) + $$(Device/bcm63xxCfeNetgear) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + CFE_BOARD_ID := $(4) + CFE_CHIP_ID := $(5) + CFE_EXTRAS := $(6) + NETGEAR_ID := $(7) + NETGEAR_REGION := $(8) endef + TARGET_DEVICES += $(2) +endef - TARGET_Default_DTBS += $(4) - TARGET_Default_IMAGES += $(3) - TARGET_$(2)_DTBS += $(4) - TARGET_$(2)_IMAGES += $(3) +# $(1) = profile +# $(2) = image name +# $(3) = dts +# $(4) = cfe board name +# $(5) = cfe chip id +# $(6) = cfe additional options +define bcm63xxCfeOld + define Device/$(2) + $$(Device/bcm63xxCfeOld) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + CFE_BOARD_ID := $(4) + CFE_CHIP_ID := $(5) + CFE_EXTRAS := $(6) + endef + TARGET_DEVICES += $(2) endef -define Image/Build - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync +# $(1) = profile +# $(2) = image name +# $(3) = dts +# $(4) = cfe board name +# $(5) = cfe chip id +# $(6) = cfe additional options +define bcm63xxCfeSpw303v + define Device/$(2) + $$(Device/bcm63xxCfeSpw303v) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + CFE_BOARD_ID := $(4) + CFE_CHIP_ID := $(5) + CFE_EXTRAS := $(6) + endef + TARGET_DEVICES += $(2) +endef - # build dtb image list - $(foreach image,$(TARGET_$(PROFILE)_IMAGES),$(call Image/Build/$(image),$(1))) +# $(1) = profile +# $(2) = image name +# $(3) = dts +# $(4) = cfe board name +# $(5) = cfe chip id +# $(6) = cfe additional options +define bcm63xxCfeZyxel + define Device/$(2) + $$(Device/bcm63xxCfeZyxel) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + CFE_BOARD_ID := $(4) + CFE_CHIP_ID := $(5) + CFE_EXTRAS := $(6) + endef + TARGET_DEVICES += $(2) +endef - ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) - $(call Image/Build/Initramfs) - endif +# $(1) = profile +# $(2) = image name +# $(3) = dts +define bcm63xxRedBoot + define Device/$(2) + $$(Device/bcm63xxRedBoot) + DEVICE_PROFILE := $(1) + DEVICE_NAME := $(2) + DEVICE_DTS := $(3) + endef + TARGET_DEVICES += $(2) endef +### Devices ### # Generic 963281TAN -$(eval $(call ImageDTB,CFEDTB,963281TAN,963281TAN-4M-flash-generic,bcm963281TAN,963281TAN,6328,--pad 2)) -$(eval $(call ImageDTB,CFEDTB,963281TAN,963281TAN-8M-flash-generic,bcm963281TAN,963281TAN,6328,--pad 4)) -$(eval $(call ImageDTB,CFEDTB,963281TAN,963281TAN-16M-flash-generic,bcm963281TAN,963281TAN,6328,--pad 8)) +$(eval $(call bcm63xxCfeMultiFlash,963281TAN,963281TAN-generic,bcm963281TAN,963281TAN,6328)) # Generic 96328avng -$(eval $(call ImageDTB,CFEDTB,96328avng,96328avng-4M-flash-generic,bcm96328avng,96328avng,6328,--pad 2)) -$(eval $(call ImageDTB,CFEDTB,96328avng,96328avng-8M-flash-generic,bcm96328avng,96328avng,6328,--pad 4)) -$(eval $(call ImageDTB,CFEDTB,96328avng,96328avng-16M-flash-generic,bcm96328avng,96328avng,6328,--pad 8)) +$(eval $(call bcm63xxCfeMultiFlash,96328avng,96328avng-generic,bcm96328avng,96328avng,6328)) # Generic 96338GW -$(eval $(call ImageDTB,CFEDTB,96338GW,96338GW-generic,bcm96338GW,6338GW,6338)) +$(eval $(call bcm63xxCfe,96338GW,96338GW-generic,bcm96338GW,6338GW,6338)) # Generic 96338W -$(eval $(call ImageDTB,CFEDTB,96338W,96338W-generic,bcm96338W,6338W,6338)) +$(eval $(call bcm63xxCfe,96338W,96338W-generic,bcm96338W,6338W,6338)) # Generic 96345GW2 -$(eval $(call ImageDTB,CFEDTB,96345GW2,96345GW2-generic,bcm96345GW2,96345GW2,6345)) -$(eval $(call ImageDTB,CFEDTB,96345GW2,96345GW2-bc221,bcm96345GW2,96345GW2,6345,--layoutver 5)) +$(eval $(call bcm63xxCfeBc221,96345GW2,96345GW2-generic,bcm96345GW2,96345GW2,6345)) # Generic 96348GW -$(eval $(call ImageDTB,CFEDTB,96348GW,96348GW-generic,bcm96348GW,96348GW,6348)) -$(eval $(call ImageDTB,CFEDTB,96348GW,96348GW-bc221,bcm96348GW,96348GW,6348,--layoutver 5)) +$(eval $(call bcm63xxCfeBc221,96348GW,96348GW-generic,bcm96348GW,96348GW,6348)) # Generic 96348GW-10 -$(eval $(call ImageDTB,CFEDTB,96348GW_10,96348GW-10-generic,bcm96348GW-10,96348GW-10,6348)) +$(eval $(call bcm63xxCfe,96348GW_10,96348GW-10-generic,bcm96348GW-10,96348GW-10,6348)) # Generic 96348GW-11 -$(eval $(call ImageDTB,CFEDTB,96348GW_11,96348GW-11-generic,bcm96348GW-11,96348GW-11,6348)) +$(eval $(call bcm63xxCfe,96348GW_11,96348GW-11-generic,bcm96348GW-11,96348GW-11,6348)) # Generic 96348R -$(eval $(call ImageDTB,CFEDTB,96348R,96348R-generic,bcm96348R,96348R,6348)) +$(eval $(call bcm63xxCfe,96348R,96348R-generic,bcm96348R,96348R,6348)) # Generic 96358VW -$(eval $(call ImageDTB,CFEDTB,96358VW,96358VW-generic,bcm96358VW,96358VW,6358)) +$(eval $(call bcm63xxCfe,96358VW,96358VW-generic,bcm96358VW,96358VW,6358)) # Generic 96358VW2 -$(eval $(call ImageDTB,CFEDTB,96358VW2,96358VW2-generic,bcm96358VW2,96358VW2,6358)) +$(eval $(call bcm63xxCfe,96358VW2,96358VW2-generic,bcm96358VW2,96358VW2,6358)) # Generic 96368MVNgr -$(eval $(call ImageDTB,CFEDTB,96368MVNgr,96368MVNgr-generic,bcm96368MVNgr,96368MVNgr,6368)) +$(eval $(call bcm63xxCfe,96368MVNgr,96368MVNgr-generic,bcm96368MVNgr,96368MVNgr,6368)) # Generic 96368MVWG -$(eval $(call ImageDTB,CFEDTB,96368MVWG,96368MVWG-generic,bcm96368MVWG,96368MVWG,6368)) +$(eval $(call bcm63xxCfe,96368MVWG,96368MVWG-generic,bcm96368MVWG,96368MVWG,6368)) # ADB P.DG A4001N -$(eval $(call ImageDTB,CFEDTB,A4001N,A4001N,a4001n,96328dg2x2,6328,--pad 4)) +$(eval $(call bcm63xxCfe,A4001N,A4001N,a4001n,96328dg2x2,6328,--pad 4)) # ADB P.DG A4001N1 -$(eval $(call ImageDTB,CFEDTB,A4001N1,A4001N1,a4001n1,963281T_TEF,6328,--pad 8)) +$(eval $(call bcm63xxCfe,A4001N1,A4001N1,a4001n1,963281T_TEF,6328,--pad 8)) # Alcatel RG100A -$(eval $(call ImageDTB,CFEDTB,RG100A,RG100A,rg100a,96358VW2,6358,--block-size 0x20000 --image-offset 0x20000)) +$(eval $(call bcm63xxCfe,RG100A,RG100A,rg100a,96358VW2,6358,--block-size 0x20000 --image-offset 0x20000)) # Asmax AR 1004g -$(eval $(call ImageDTB,CFEDTB,AR1004G,AR1004G,ar1004g,96348GW-10,6348)) +$(eval $(call bcm63xxCfe,AR1004G,AR1004G,ar1004g,96348GW-10,6348)) # Belkin F5D7633 -$(eval $(call ImageDTB,CFEDTB,F5D7633,F5D7633,f5d7633,96348GW-10,6348,--block-size 0x20000 --image-offset 0x20000)) +$(eval $(call bcm63xxCfe,F5D7633,F5D7633,f5d7633,96348GW-10,6348,--block-size 0x20000 --image-offset 0x20000)) # Broadcom BCM96318REF -$(eval $(call ImageDTB,Dummy,BCM96318REF,BCM96318REF,bcm96318ref,96318REF,6318)) +$(eval $(call bcm63xxCfeRamdisk,BCM96318REF,BCM96318REF,bcm96318ref,96318REF,6318)) # Broadcom BCM96318REF_P300 -$(eval $(call ImageDTB,Dummy,BCM96318REF_P300,BCM96318ref_P300,bcm96318ref_p300,96318REF_P300,6318)) +$(eval $(call bcm63xxCfeRamdisk,BCM96318REF_P300,BCM96318ref_P300,bcm96318ref_p300,96318REF_P300,6318)) # Broadcom BCM963268BU_P300 -$(eval $(call ImageDTB,Dummy,BCM963268BU_P300,BCM963268BU_P300,bcm963268bu_p300,963268BU_P300,63268)) +$(eval $(call bcm63xxCfeRamdisk,BCM963268BU_P300,BCM963268BU_P300,bcm963268bu_p300,963268BU_P300,63268)) # Broadcom BCM963269BHR -$(eval $(call ImageDTB,Dummy,BCM963269BHR,BCM963269BHR,bcm963269bhr,963269BHR,63268)) +$(eval $(call bcm63xxCfeRamdisk,BCM963269BHR,BCM963269BHR,bcm963269bhr,963269BHR,63268)) # BT Home Hub 2.0 A -$(eval $(call ImageDTB,CFEDTB,BTHOMEHUB2A,HomeHub2A,homehub2a,HOMEHUB2A,6358,--image-offset 0x20000 --block-size 0x20000)) +$(eval $(call bcm63xxCfe,BTHOMEHUB2A,HomeHub2A,homehub2a,HOMEHUB2A,6358,--image-offset 0x20000 --block-size 0x20000)) # BT Voyager V2110, V2110_AA, V2110_ROI -$(eval $(call ImageDTB,CFEDTB,BTV2110,BTV2110,v2110,V2110,6348,--layoutver 5)) +$(eval $(call bcm63xxCfe,BTV2110,BTV2110,v2110,V2110,6348,--layoutver 5)) # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA -$(eval $(call ImageDTB,CFEDTB,BTV2500V,BTV2500V,v2500v-bb,V2500V_BB,6348,--layoutver 5)) +$(eval $(call bcm63xxCfe,BTV2500V,BTV2500V,v2500v-bb,V2500V_BB,6348,--layoutver 5)) # Comtrend AR-5381u -$(eval $(call ImageDTB,CFEDTB,AR5381u,AR-5381u,ar-5381u,96328A-1241N,6328,--pad 8)) +$(eval $(call bcm63xxCfe,AR5381u,AR-5381u,ar-5381u,96328A-1241N,6328,--pad 8)) # Comtrend AR-5387un -$(eval $(call ImageDTB,CFEDTB,AR5387un,AR-5387un,ar-5387un,96328A-1441N1,6328,--pad 8)) +$(eval $(call bcm63xxCfe,AR5387un,AR-5387un,ar-5387un,96328A-1441N1,6328,--pad 8)) # Comtrend 536, 5621 -$(eval $(call ImageDTB,CFEDTB,CT536_CT5621,CT536_CT5621,ct536plus,96348GW-11,6348)) +$(eval $(call bcm63xxCfe,CT536_CT5621,CT536_CT5621,ct536plus,96348GW-11,6348)) # Comtrend CT-5365 -$(eval $(call ImageDTB,CFEDTB,CT5365,CT-5365,ct-5365,96348A-122,6348)) +$(eval $(call bcm63xxCfe,CT5365,CT-5365,ct-5365,96348A-122,6348)) # Comtrend CT-6373 -$(eval $(call ImageDTB,CFEDTB,CT6373,CT-6373,ct-6373,CT6373-1,6358)) +$(eval $(call bcm63xxCfe,CT6373,CT-6373,ct-6373,CT6373-1,6358)) # Comtrend VR-3025u -$(eval $(call ImageDTB,CFEDTB,VR3025u,VR-3025u,vr-3025u,96368M-1541N,6368,--pad 16 --image-offset 0x20000 --block-size 0x20000)) +$(eval $(call bcm63xxCfe,VR3025u,VR-3025u,vr-3025u,96368M-1541N,6368,--pad 16 --image-offset 0x20000 --block-size 0x20000)) # Comtrend VR-3025un -$(eval $(call ImageDTB,CFEDTB,VR3025un,VR-3025un,vr-3025un,96368M-1341N,6368,--pad 4)) +$(eval $(call bcm63xxCfe,VR3025un,VR-3025un,vr-3025un,96368M-1341N,6368,--pad 4)) # Comtrend WAP-5813n -$(eval $(call ImageDTB,CFEDTB,WAP5813n,WAP-5813n,wap-5813n,96369R-1231N,6368,--pad 4)) +$(eval $(call bcm63xxCfe,WAP5813n,WAP-5813n,wap-5813n,96369R-1231N,6368,--pad 4)) # D-Link DSL-2640B, rev B2 -$(eval $(call ImageDTB,CFEDTB,DSL2640B-B2,DSL2640B_B,dsl-2640b-b,D-4P-W,6348)) +$(eval $(call bcm63xxCfe,DSL2640B-B2,DSL2640B_B,dsl-2640b-b,D-4P-W,6348)) # D-Link DSL-2640U, rev C1 -$(eval $(call ImageDTB,CFEDTB,DSL2640U,DSL2640U,dsl-2640u,96338W2_E7T,6338)) +$(eval $(call bcm63xxCfe,DSL2640U,DSL2640U,dsl-2640u,96338W2_E7T,6338)) # D-Link DSL-2650U -$(eval $(call ImageDTB,CFEDTB,DSL2650U,DSL2650U,dsl-2650u,96358VW2,6358)) +$(eval $(call bcm63xxCfe,DSL2650U,DSL2650U,dsl-2650u,96358VW2,6358)) # D-Link DSL-2740B/DSL-2741B, rev C2 -$(eval $(call ImageDTB,CFEDTB,DSL274XB_C,DSL274XB-C2,dsl-274xb-c,96358GW,6358)) +$(eval $(call bcm63xxCfe,DSL274XB_C,DSL274XB-C2,dsl-274xb-c,96358GW,6358)) # D-Link DSL-2740B/DSL-2741B, rev C3 -$(eval $(call ImageDTB,CFEDTB,DSL274XB_C,DSL274XB-C3,dsl-274xb-c,AW4139,6358)) +$(eval $(call bcm63xxCfe,DSL274XB_C,DSL274XB-C3,dsl-274xb-c,AW4139,6358)) # D-Link DSL-2740B/DSL-2741B, rev F1 -$(eval $(call ImageDTB,CFEDTB,DSL274XB_F,DSL274XB-F1-EU,dsl-274xb-f,AW4339U,6328,--signature2 "4.06.01.EUF1" --pad 4)) -$(eval $(call ImageDTB,CFEDTB,DSL274XB_F,DSL274XB-F1-AU,dsl-274xb-f,AW4339U,6328,--signature2 "4.06.01.AUF1" --pad 4)) +$(eval $(call bcm63xxCfe,DSL274XB_F,DSL274XB-F1-EU,dsl-274xb-f,AW4339U,6328,--signature2 "4.06.01.EUF1" --pad 4)) +$(eval $(call bcm63xxCfe,DSL274XB_F,DSL274XB-F1-AU,dsl-274xb-f,AW4339U,6328,--signature2 "4.06.01.AUF1" --pad 4)) # D-Link DSL-2750B/DSL-2751, rev D1 -$(eval $(call ImageDTB,Dummy,DSL275XB_D,DSL275XB-D1,dsl-275xb-d,AW5200U,6318, --pad 4)) +$(eval $(call bcm63xxCfeRamdisk,DSL275XB_D,DSL275XB-D1,dsl-275xb-d,AW5200U,6318,--pad 4)) # D-Link DVA-G3810BN/TL -$(eval $(call ImageDTB,CFEDTB,DVAG3810BN,DVAG3810BN,dva-g3810bn_tl,96358VW,6358)) +$(eval $(call bcm63xxCfe,DVAG3810BN,DVAG3810BN,dva-g3810bn_tl,96358VW,6358)) # Davolink DV-201AMR -$(eval $(call ImageDTB,OLDCFEDTB,DV201AMR,DV-201AMR,dv-201amr,DV201AMR,6348)) +$(eval $(call bcm63xxCfeOld,DV201AMR,DV-201AMR,dv-201amr,DV201AMR,6348)) # Dynalink RTA770BW (Siemens SE515) -$(eval $(call ImageDTB,Dummy,RTA770BW,RTA770BW,rta770bw,RTA770BW,6345,--layoutver 5)) +$(eval $(call bcm63xxCfeRamdisk,RTA770BW,RTA770BW,rta770bw,RTA770BW,6345,--layoutver 5)) # Dynalink RTA770W -$(eval $(call ImageDTB,Dummy,RTA770W,RTA770W,rta770w,RTA770W,6345,--layoutver 5)) +$(eval $(call bcm63xxCfeRamdisk,RTA770W,RTA770W,rta770w,RTA770W,6345,--layoutver 5)) # Dynalink RTA1025W (numerous routers) -$(eval $(call ImageDTB,CFEDTB,RTA1025W,RTA1025W_16,rta1025w,RTA1025W_16,6348,--layoutver 5)) +$(eval $(call bcm63xxCfe,RTA1025W,RTA1025W_16,rta1025w,RTA1025W_16,6348,--layoutver 5)) # Dynalink RTA1320 (numerous routers) -$(eval $(call ImageDTB,CFEDTB,RTA1320,RTA1320_16M,rta1320,RTA1320_16M,6338,--layoutver 5)) +$(eval $(call bcm63xxCfe,RTA1320,RTA1320_16M,rta1320,RTA1320_16M,6338,--layoutver 5)) # Huawei HG520v -$(eval $(call ImageDTB,CFEDTB,HG520v,HG520v,hg520v,HW6358GW_B,6358,--rsa-signature "EchoLife_HG520v")) +$(eval $(call bcm63xxCfe,HG520v,HG520v,hg520v,HW6358GW_B,6358,--rsa-signature "EchoLife_HG520v")) # Huawei HG553 -$(eval $(call ImageDTB,CFEDTB,HG553,HG553,hg553,HW553,6358,--rsa-signature "EchoLife_HG553" --image-offset 0x20000 --block-size 0x20000 --tag-version 7)) +$(eval $(call bcm63xxCfe,HG553,HG553,hg553,HW553,6358,--rsa-signature "EchoLife_HG553" --image-offset 0x20000 --block-size 0x20000 --tag-version 7)) # Huawei HG556a -$(eval $(call ImageDTB,CFEDTB,HG556a_AB,HG556a_A,hg556a-a,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x10000 --tag-version 8)) -$(eval $(call ImageDTB,CFEDTB,HG556a_AB,HG556a_B,hg556a-b,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8)) -$(eval $(call ImageDTB,CFEDTB,HG556a_C,HG556a_C,hg556a-c,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8)) +$(eval $(call bcm63xxCfe,HG556a_AB,HG556a_A,hg556a-a,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x10000 --tag-version 8)) +$(eval $(call bcm63xxCfe,HG556a_AB,HG556a_B,hg556a-b,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8)) +$(eval $(call bcm63xxCfe,HG556a_C,HG556a_C,hg556a-c,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8)) # Huawei HG655b -$(eval $(call ImageDTB,CFEDTB,HG655b,HG655b,hg655b,HW65x,6368,--image-offset 0x20000 --tag-version 7 --pad 4)) +$(eval $(call bcm63xxCfe,HG655b,HG655b,hg655b,HW65x,6368,--image-offset 0x20000 --tag-version 7 --pad 4)) # Inteno VG50 -$(eval $(call ImageDTB,Dummy,VG50,vg50,vg50,VW6339GU,63268)) +$(eval $(call bcm63xxCfeRamdisk,VG50,vg50,vg50,VW6339GU,63268)) # Inventel Livebox 1 -$(eval $(call ImageDTB,RedBootDTB,Livebox,livebox,livebox-blue-5g)) +$(eval $(call bcm63xxRedBoot,Livebox,livebox,livebox-blue-5g)) # Netgear CVG834G -$(eval $(call ImageDTB,Dummy,CVG834G,cvg834g,cvg834g,a020,0001,0022,vmlinux-cvg834g)) +$(eval $(call bcm33xxHcsRamdisk,CVG834G,cvg834g,cvg834g,a020,0001,0022)) # Netgear DG834GT/PN -$(eval $(call ImageDTB,CFEDTB,DG834GTPN,DG834GT_PN,dg834gtpn,96348GW-10,6348)) +$(eval $(call bcm63xxCfe,DG834GTPN,DG834GT_PN,dg834gtpn,96348GW-10,6348)) # Netgear DG834G v4 -$(eval $(call ImageDTB,Dummy,DG834GV4,DG834GTv4,dg834g_v4,96348W3,6348)) -# Netgear DGND3700 v1 / DGND3800B -$(eval $(call ImageDTB,CFEDTB,DGND3700v1_3800B,DGND3700v1_3800B,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000)) -#Netgear DGND3700 v1 factory firmware -$(eval $(call ImageDTB,ChkDTB,DGND3700v1_3800B,DGND3700v1,,DGND3700v1_3800B,U12L144T01_NETGEAR_NEWLED,1)) -#Netgear DGND3800B factory firmware -$(eval $(call ImageDTB,ChkDTB,DGND3700v1_3800B,DGND3800B,,DGND3700v1_3800B,U12L144T11_NETGEAR_NEWLED,1)) +$(eval $(call bcm63xxCfeRamdisk,DG834GV4,DG834GTv4,dg834g_v4,96348W3,6348)) +# Netgear DGND3700 v1 +$(eval $(call bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3700v1,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000,U12L144T01_NETGEAR_NEWLED,1)) +# Netgear DGND3800B +$(eval $(call bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3800B,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000,U12L144T11_NETGEAR_NEWLED,1)) # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0 -$(eval $(call ImageDTB,CFEDTB,AGPF_S0,AGV2+W,agpf-s0,AGPF-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8)) +$(eval $(call bcm63xxCfe,AGPF_S0,AGV2+W,agpf-s0,AGPF-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8)) # Pirelli A226G -$(eval $(call ImageDTB,CFEDTB,A226G,A226G,a226g,DWV-S0,6358,--signature2 IMAGE --tag-version 8)) +$(eval $(call bcm63xxCfe,A226G,A226G,a226g,DWV-S0,6358,--signature2 IMAGE --tag-version 8)) # Pirelli A226M/A226M-FWB -$(eval $(call ImageDTB,CFEDTB,A226M,A226M,a226m,DWV-S0,6358,--signature2 IMAGE --tag-version 8)) -$(eval $(call ImageDTB,CFEDTB,A226M,A226M-FWB,a226m-fwb,DWV-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8)) +$(eval $(call bcm63xxCfe,A226M,A226M,a226m,DWV-S0,6358,--signature2 IMAGE --tag-version 8)) +$(eval $(call bcm63xxCfe,A226M,A226M-FWB,a226m-fwb,DWV-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8)) # Sagem F@ST2404 -$(eval $(call ImageDTB,CFEDTB,FAST2404,F@ST2404,fast2404,F@ST2404,6348)) +$(eval $(call bcm63xxCfe,FAST2404,F@ST2404,fast2404,F@ST2404,6348)) # Sagem F@ST2504n -$(eval $(call ImageDTB,CFEDTB,FAST2504n,F@ST2504n,fast2504n,F@ST2504n,6362)) +$(eval $(call bcm63xxCfe,FAST2504n,F@ST2504n,fast2504n,F@ST2504n,6362)) # Sagem F@ST2604 -$(eval $(call ImageDTB,CFEDTB,FAST2604,F@ST2604,fast2604,F@ST2604,6348)) +$(eval $(call bcm63xxCfe,FAST2604,F@ST2604,fast2604,F@ST2604,6348)) # Sagem F@ST2704V2 -$(eval $(call ImageDTB,CFEDTB,FAST2704V2,F@ST2704V2,fast2704v2,F@ST2704V2,6328)) +$(eval $(call bcm63xxCfe,FAST2704V2,F@ST2704V2,fast2704v2,F@ST2704V2,6328)) # SFR Neufbox 4 -$(eval $(call ImageDTB,CFEDTB,Neufbox4,NEUFBOX4-SER,nb4-ser-r0,96358VW,6358,--rsa-signature "OpenWRT-$(REVISION)")) -$(eval $(call ImageDTB,CFEDTB,Neufbox4,NEUFBOX4-FXC,nb4-fxc-r1,96358VW,6358,--rsa-signature "OpenWRT-$(REVISION)")) +$(eval $(call bcm63xxCfe,Neufbox4,NEUFBOX4-SER,nb4-ser-r0,96358VW,6358,--rsa-signature "OpenWRT-$(REVISION)")) +$(eval $(call bcm63xxCfe,Neufbox4,NEUFBOX4-FXC,nb4-fxc-r1,96358VW,6358,--rsa-signature "OpenWRT-$(REVISION)")) # SFR Neufbox 6 -$(eval $(call ImageDTB,CFEDTB,Neufbox6,NEUFBOX6,nb6-ser-r0,NB6-SER-r0,6362,--rsa-signature "OpenWRT-$(REVISION)")) +$(eval $(call bcm63xxCfe,Neufbox6,NEUFBOX6,nb6-ser-r0,NB6-SER-r0,6362,--rsa-signature "OpenWRT-$(REVISION)")) # T-Com Speedport W 303V Typ B -$(eval $(call ImageDTB,SPW303VCFEDTB,SPW303V,SPW303V,spw303v,96358-502V,6358,--pad 4)) +$(eval $(call bcm63xxCfeSpw303v,SPW303V,SPW303V,spw303v,96358-502V,6358,--pad 4)) # T-Com Speedport W 500V -$(eval $(call ImageDTB,CFEDTB,SPW500V,SPW500V,spw500v,96348GW,6348)) +$(eval $(call bcm63xxCfe,SPW500V,SPW500V,spw500v,96348GW,6348)) # Tecom GW6000 -$(eval $(call ImageDTB,CFEDTB,GW6000,GW6000,gw6000,96348GW,6348)) +$(eval $(call bcm63xxCfe,GW6000,GW6000,gw6000,96348GW,6348)) # Tecom GW6200 -$(eval $(call ImageDTB,CFEDTB,GW6200,GW6200,gw6200,96348GW,6348,--rsa-signature "$(shell printf '\x99')")) +$(eval $(call bcm63xxCfe,GW6200,GW6200,gw6200,96348GW,6348,--rsa-signature "$(shell printf '\x99')")) # Telsey CPVA502+ -$(eval $(call ImageDTB,Dummy,CPVA502PLUS,CVPA502PLUS,cpva502plus,CPVA502+,6348,--signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0")) +$(eval $(call bcm63xxCfeRamdisk,CPVA502PLUS,CVPA502PLUS,cpva502plus,CPVA502+,6348,--signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0")) # Telsey CPVA642-type (e.g. CPA-ZNTE60T) -$(eval $(call ImageDTB,CFEDTB,CPVA642,CPA-ZNTE60T,cpva642,CPVA642,6358,--signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0" --pad 4)) +$(eval $(call bcm63xxCfe,CPVA642,CPA-ZNTE60T,cpva642,CPVA642,6358,--signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0" --pad 4)) # Telsey MAGIC (Alice W-Gate) -$(eval $(call ImageDTB,Dummy,MAGIC,MAGIC,magic,MAGIC,6348)) +$(eval $(call bcm63xxCfeRamdisk,MAGIC,MAGIC,magic,MAGIC,6348)) # TP-Link TD-W8900GB -$(eval $(call ImageDTB,CFEDTB,TDW8900GB,TD-W8900GB,td-w8900gb,96348GW-11,6348,--rsa-signature "$(shell printf 'PRID\x89\x10\x00\x02')" --image-offset 0x20000)) +$(eval $(call bcm63xxCfe,TDW8900GB,TD-W8900GB,td-w8900gb,96348GW-11,6348,--rsa-signature "$(shell printf 'PRID\x89\x10\x00\x02')" --image-offset 0x20000)) # USRobotics 9108 -$(eval $(call ImageDTB,CFEDTB,USR9108,USR9108,usr9108,96348GW-A,6348)) +$(eval $(call bcm63xxCfe,USR9108,USR9108,usr9108,96348GW-A,6348)) # ZyXEL P870HW-51a v2 -$(eval $(call ImageDTB,ZYXCFEDTB,P870HW_51a_v2,P870HW-51a_v2,p870hw-51a-v2,96368VVW,6368,--rsa-signature "ZyXEL" --signature "ZyXEL_0001")) +$(eval $(call bcm63xxCfeZyxel,P870HW_51a_v2,P870HW-51a_v2,p870hw-51a-v2,96368VVW,6368,--rsa-signature "ZyXEL" --signature "ZyXEL_0001")) $(eval $(call BuildImage)) |