diff options
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/ipq806x/base-files/etc/board.d/01_leds | 11 | ||||
| -rw-r--r-- | target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts | 66 |
2 files changed, 43 insertions, 34 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index 6809c549b4..fbe19cd77b 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -20,8 +20,7 @@ c2600) ;; d7800 |\ r7500 |\ -r7500v2 |\ -r7800) +r7500v2) ucidef_set_led_usbdev "usb1" "USB 1" "${board}:white:usb1" "1-1" ucidef_set_led_usbdev "usb2" "USB 2" "${board}:white:usb3" "3-1" ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0" @@ -29,6 +28,14 @@ r7800) ucidef_set_led_default "wps" "WPS" "${board}:white:wps" "0" ucidef_set_led_default "rfkill" "rfkill" "${board}:white:rfkill" "0" ;; +r7800) + ucidef_set_led_usbdev "usb1" "USB 1" "${board}:white:usb1" "2-1" + ucidef_set_led_usbdev "usb2" "USB 2" "${board}:white:usb2" "4-1" + ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0" + ucidef_set_led_ide "esata" "eSATA" "${board}:white:esata" + ucidef_set_led_wlan "wps" "WPS" "${board}:white:wps" "phy0tpt" + ucidef_set_led_wlan "rfkill" "rfkill" "${board}:white:rfkill" "phy1tpt" + ;; ea8500) ucidef_set_led_wlan "wifi" "WIFI" "ea8500:green:wifi" "phy0radio" ucidef_set_led_default "wps" "WPS" "ea8500:green:wps" "0" diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts index 6d9349f853..43ee572ac6 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts @@ -4,7 +4,7 @@ / { model = "Netgear Nighthawk X4S R7800"; - compatible = "netgear,r7800", "qcom,ipq8065"; + compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064"; memory@0 { reg = <0x42000000 0x1e000000>; @@ -29,10 +29,14 @@ aliases { serial0 = &uart4; mdio-gpio0 = &mdio0; + + led-boot = &power_white; + led-failsafe = &power_white; + led-running = &power_white; + led-upgrade = &power_amber; }; chosen { - bootargs = "rootfstype=squashfs noinitrd"; linux,stdout-path = "serial0:115200n8"; }; @@ -160,6 +164,7 @@ }; sata@29000000 { + ports-implemented = <0x1>; status = "ok"; }; @@ -189,16 +194,12 @@ pcie0: pci@1b500000 { status = "ok"; - reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; + phy-tx0-term-offset = <7>; }; pcie1: pci@1b700000 { status = "ok"; - reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; + phy-tx0-term-offset = <7>; }; nand@1ac00000 { @@ -208,6 +209,7 @@ pinctrl-names = "default"; nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; nand-bus-width = <8>; #address-cells = <1>; @@ -368,7 +370,7 @@ wifi { label = "wifi"; gpios = <&qcom_pinmux 6 1>; - linux,code = <KEY_WLAN>; + linux,code = <KEY_RFKILL>; }; reset { @@ -387,34 +389,35 @@ gpio-leds { compatible = "gpio-leds"; - usb1 { - label = "r7800:amber:usb1"; - gpios = <&qcom_pinmux 7 0>; - }; - - usb3 { - label = "r7800:amber:usb3"; - gpios = <&qcom_pinmux 8 0>; + power_white: power_white { + label = "r7800:white:power"; + gpios = <&qcom_pinmux 53 0>; + default-state = "on"; }; - status { - label = "r7800:amber:status"; + power_amber: power_amber { + label = "r7800:amber:power"; gpios = <&qcom_pinmux 9 0>; }; - internet { - label = "r7800:white:internet"; + wan_white { + label = "r7800:white:wan"; gpios = <&qcom_pinmux 22 0>; }; - wan { - label = "r7800:white:wan"; + wan_amber { + label = "r7800:amber:wan"; gpios = <&qcom_pinmux 23 0>; }; - wps { - label = "r7800:white:wps"; - gpios = <&qcom_pinmux 24 0>; + usb1 { + label = "r7800:white:usb1"; + gpios = <&qcom_pinmux 7 0>; + }; + + usb2 { + label = "r7800:white:usb2"; + gpios = <&qcom_pinmux 8 0>; }; esata { @@ -422,17 +425,16 @@ gpios = <&qcom_pinmux 26 0>; }; - power { - label = "r7800:white:power"; - gpios = <&qcom_pinmux 53 0>; - default-state = "on"; - }; - rfkill { label = "r7800:white:rfkill"; gpios = <&qcom_pinmux 64 0>; }; + wps { + label = "r7800:white:wps"; + gpios = <&qcom_pinmux 24 0>; + }; + wifi { label = "r7800:white:wifi"; gpios = <&qcom_pinmux 67 0>; |