aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ipq806x/config-4.4426
-rw-r--r--target/linux/ipq806x/patches-4.4/001-add-API-register-brd-clks-bckwrds-cmptblt.patch135
-rw-r--r--target/linux/ipq806x/patches-4.4/002-make-reset-control-ops-const.patch35
-rw-r--r--target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch172
-rw-r--r--target/linux/ipq806x/patches-4.4/005-mfd-qcom_rpm-Add-missing-of_node_put-after-calling-of_parse_phandle.patch25
-rw-r--r--target/linux/ipq806x/patches-4.4/006-mfd-qcom_rpm-Handle-message-RAM-clock.patch90
-rw-r--r--target/linux/ipq806x/patches-4.4/009-1-watchdog-core-add-restart-handler-support.patch205
-rw-r--r--target/linux/ipq806x/patches-4.4/009-2-watchdog-core-add-reboot-notifier-support.patch160
-rw-r--r--target/linux/ipq806x/patches-4.4/009-3-watchdog-Use-static-struct-class-watchdog_class-instead-of-pointer.patch111
-rw-r--r--target/linux/ipq806x/patches-4.4/009-4-watchdog-Read-device-status-through-sysfs-attributes.patch260
-rw-r--r--target/linux/ipq806x/patches-4.4/009-5-watchdog-Create-watchdog-device-in-watchdog_dev-c.patch261
-rw-r--r--target/linux/ipq806x/patches-4.4/009-6-watchdog-Separate-and-maintain-variables-based-on-variable-lifetime.patch969
-rw-r--r--target/linux/ipq806x/patches-4.4/009-7-watchdog-Drop-pointer-to-watchdog-device-from-struct-watchdog_device.patch117
-rw-r--r--target/linux/ipq806x/patches-4.4/009-8-watchdog-kill-unref-ref-ops.patch26
-rw-r--r--target/linux/ipq806x/patches-4.4/010-1-qcom-wdt-use-core-restart-handler.patch113
-rw-r--r--target/linux/ipq806x/patches-4.4/010-2-qcom-wdt-Do-not-set-dev-in-struct-watchdog_device.patch25
-rw-r--r--target/linux/ipq806x/patches-4.4/010-3-watchdog-Add-action-and-data-parameters-to-restart-handler-callback.patch51
-rw-r--r--target/linux/ipq806x/patches-4.4/010-4-watchdog-qcom-Report-reboot-reason.patch46
-rw-r--r--target/linux/ipq806x/patches-4.4/010-5-watchdog-qcom-add-option-for-standalone-watchdog-not-in-timer-block.patch162
-rw-r--r--target/linux/ipq806x/patches-4.4/010-6-watchdog-qcom-configure-BARK-time-in-addition-to-BITE-time.patch60
-rw-r--r--target/linux/ipq806x/patches-4.4/011-1-fix-bld-errs-hwmon-sch56xx-Drop-watchdog-driver-data-reference-count-callbacks.patch95
-rw-r--r--target/linux/ipq806x/patches-4.4/011-2-fix-bld-errs-watchdog-da9052_wdt-Drop-reference-counting.patch87
-rw-r--r--target/linux/ipq806x/patches-4.4/011-3-fix-bld-errs-watchdog-da9055_wdt-Drop-reference-counting.patch80
-rw-r--r--target/linux/ipq806x/patches-4.4/012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch746
-rw-r--r--target/linux/ipq806x/patches-4.4/012-2-clk-qcom-Add-support-for-RPM-Clocks.patch586
-rw-r--r--target/linux/ipq806x/patches-4.4/012-3-clk-qcom-clk-rpm-Fix-clk_hw-references.patch94
-rw-r--r--target/linux/ipq806x/patches-4.4/015-1-thermal-qcom-tsens-Add-a-skeletal-TSENS-drivers.patch536
-rw-r--r--target/linux/ipq806x/patches-4.4/015-2-thermal-qcom-tsens-8916-Add-support-for-8916-family-of-SoCs.patch165
-rw-r--r--target/linux/ipq806x/patches-4.4/015-3-thermal-qcom-tsens-8974-Add-support-for-8974-family-of-SoCs.patch293
-rw-r--r--target/linux/ipq806x/patches-4.4/015-4-thermal-qcom-tsens-8960-Add-support-for-8960-family-of-SoCs.patch364
-rw-r--r--target/linux/ipq806x/patches-4.4/015-8-qcom-tsens-8916-mark-PM-functions-__maybe_unused.patch46
-rw-r--r--target/linux/ipq806x/patches-4.4/016-2-thermal-of-thermal-Add-devm-version-of.patch143
-rw-r--r--target/linux/ipq806x/patches-4.4/017-09-thermal-core-export-apis-to-get-slope-and-offset.patch101
-rw-r--r--target/linux/ipq806x/patches-4.4/019-1-nvmem-core-return-error-for-non-word-aligned-access.patch42
-rw-r--r--target/linux/ipq806x/patches-4.4/019-2-nvmem-core-fix-error-path-in-nvmem_add_cells.patch34
-rw-r--r--target/linux/ipq806x/patches-4.4/019-3-nvmem-Add-flag-to-export-NVMEM-to-root-only.patch101
-rw-r--r--target/linux/ipq806x/patches-4.4/019-4-nvmem-Add-backwards-compatibility-support-for-older-EEPROM-drivers.patch181
-rw-r--r--target/linux/ipq806x/patches-4.4/020-add-ap148-bootargs.patch61
-rw-r--r--target/linux/ipq806x/patches-4.4/021-add-ap148-partitions.patch19
-rw-r--r--target/linux/ipq806x/patches-4.4/022-add-db149-dts.patch160
-rw-r--r--target/linux/ipq806x/patches-4.4/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch52
-rw-r--r--target/linux/ipq806x/patches-4.4/024-ap148-add-memory-node.patch14
-rw-r--r--target/linux/ipq806x/patches-4.4/030-ARM-qcom-select-ARM_CPU_SUSPEND-for-power-management.patch30
-rw-r--r--target/linux/ipq806x/patches-4.4/033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch33
-rw-r--r--target/linux/ipq806x/patches-4.4/036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch36
-rw-r--r--target/linux/ipq806x/patches-4.4/037-mtd-add-SMEM-parser-for-QCOM-platforms.patch275
-rw-r--r--target/linux/ipq806x/patches-4.4/096-01-usb-dwc3-core-purge-dev_dbg-calls.patch42
-rw-r--r--target/linux/ipq806x/patches-4.4/096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch52
-rw-r--r--target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch68
-rw-r--r--target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch28
-rw-r--r--target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch42
-rw-r--r--target/linux/ipq806x/patches-4.4/096-06-usb-dwc3-core-improve-reset-sequence.patch100
-rw-r--r--target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch242
-rw-r--r--target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch265
-rw-r--r--target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch96
-rw-r--r--target/linux/ipq806x/patches-4.4/096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch67
-rw-r--r--target/linux/ipq806x/patches-4.4/097-1-usb-dwc3-add-generic-OF-glue-layer.patch234
-rw-r--r--target/linux/ipq806x/patches-4.4/097-2-usb-dwc3-of-simple-fix-build-warning-on-PM.patch36
-rw-r--r--target/linux/ipq806x/patches-4.4/097-3-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch47
-rw-r--r--target/linux/ipq806x/patches-4.4/097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch27
-rw-r--r--target/linux/ipq806x/patches-4.4/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch512
-rw-r--r--target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch123
-rw-r--r--target/linux/ipq806x/patches-4.4/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch263
-rw-r--r--target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch752
-rw-r--r--target/linux/ipq806x/patches-4.4/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch245
-rw-r--r--target/linux/ipq806x/patches-4.4/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch29
-rw-r--r--target/linux/ipq806x/patches-4.4/114-pcie-add-ctlr-init.patch311
-rw-r--r--target/linux/ipq806x/patches-4.4/115-add-pcie-aux-clk-dts.patch80
-rw-r--r--target/linux/ipq806x/patches-4.4/126-add-rpm-to-ipq8064-dts.patch87
-rw-r--r--target/linux/ipq806x/patches-4.4/133-ARM-Add-Krait-L2-register-accessor-functions.patch144
-rw-r--r--target/linux/ipq806x/patches-4.4/134-clk-mux-Split-out-register-accessors-for-reuse.patch177
-rw-r--r--target/linux/ipq806x/patches-4.4/135-clk-Avoid-sending-high-rates-to-downstream-clocks-du.patch122
-rw-r--r--target/linux/ipq806x/patches-4.4/136-clk-Add-safe-switch-hook.patch151
-rw-r--r--target/linux/ipq806x/patches-4.4/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch351
-rw-r--r--target/linux/ipq806x/patches-4.4/138-clk-qcom-Add-HFPLL-driver.patch206
-rw-r--r--target/linux/ipq806x/patches-4.4/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch127
-rw-r--r--target/linux/ipq806x/patches-4.4/140-clk-qcom-Add-support-for-Krait-clocks.patch272
-rw-r--r--target/linux/ipq806x/patches-4.4/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch207
-rw-r--r--target/linux/ipq806x/patches-4.4/142-clk-qcom-Add-Krait-clock-controller-driver.patch435
-rw-r--r--target/linux/ipq806x/patches-4.4/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch304
-rw-r--r--target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch96
-rw-r--r--target/linux/ipq806x/patches-4.4/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch76
-rw-r--r--target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch964
-rw-r--r--target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch42
-rw-r--r--target/linux/ipq806x/patches-4.4/161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch83
-rw-r--r--target/linux/ipq806x/patches-4.4/162-mtd-nand-Qualcomm-NAND-controller-driver.patch2024
-rw-r--r--target/linux/ipq806x/patches-4.4/163-dt-bindings-qcom_nandc-Add-DT-bindings.patch82
-rw-r--r--target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch51
-rw-r--r--target/linux/ipq806x/patches-4.4/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch76
-rw-r--r--target/linux/ipq806x/patches-4.4/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch11
-rw-r--r--target/linux/ipq806x/patches-4.4/167-ARM-qcom_rpm_fix_support_for_smb208.patch50
-rw-r--r--target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch74
-rw-r--r--target/linux/ipq806x/patches-4.4/169-OPP-Support-adjusting-OPP-voltages-at-runtime.patch145
-rw-r--r--target/linux/ipq806x/patches-4.4/170-OPP-Allow-notifiers-to-call-dev_pm_opp_get_voltage-freq-RCU-free.patch114
-rw-r--r--target/linux/ipq806x/patches-4.4/172-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch184
-rw-r--r--target/linux/ipq806x/patches-4.4/173-cpufreq-dt-Add-L2-frequency-scaling-support.patch161
-rw-r--r--target/linux/ipq806x/patches-4.4/174-cpufreq-dt-Add-missing-rcu_read_lock-for-find_device_opp.patch33
-rw-r--r--target/linux/ipq806x/patches-4.4/175-add-regmap-mux-div.patch386
-rw-r--r--target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch53
-rw-r--r--target/linux/ipq806x/patches-4.4/181-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch29
-rw-r--r--target/linux/ipq806x/patches-4.4/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch62
-rw-r--r--target/linux/ipq806x/patches-4.4/302-mtd-qcom-smem-rename-rootfs-ubi.patch13
-rw-r--r--target/linux/ipq806x/patches-4.4/303-add-saw_l2-and-sns-into-ipq8064-DT.patch41
-rw-r--r--target/linux/ipq806x/patches-4.4/304-add-cpu-idle-state-into-ipq8064-DT.patch58
-rw-r--r--target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch43
-rw-r--r--target/linux/ipq806x/patches-4.4/306-add-RPM-msg-RAM-into-DT.patch22
-rw-r--r--target/linux/ipq806x/patches-4.4/307-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch25
-rw-r--r--target/linux/ipq806x/patches-4.4/308-soc-qcom-ipq806x-Increase-Atomic-Coherent-Pool-size.patch52
-rw-r--r--target/linux/ipq806x/patches-4.4/309-clk-gcc-add-tsens-child-node.patch38
-rw-r--r--target/linux/ipq806x/patches-4.4/310-add-necessary-thermal-data.patch150
-rw-r--r--target/linux/ipq806x/patches-4.4/311-add-rpmcc-for-ipq806x.patch81
-rw-r--r--target/linux/ipq806x/patches-4.4/315-disable-usb3-phy-suspend.patch36
-rw-r--r--target/linux/ipq806x/patches-4.4/316-dt-add-prng-support.patch16
-rw-r--r--target/linux/ipq806x/patches-4.4/400-dsa-add-qca.patch1068
-rw-r--r--target/linux/ipq806x/patches-4.4/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch146
-rw-r--r--target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch216
-rw-r--r--target/linux/ipq806x/patches-4.4/709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch129
-rw-r--r--target/linux/ipq806x/patches-4.4/710-spi-qup-Make-sure-mode-is-only-determined-once.patch220
-rw-r--r--target/linux/ipq806x/patches-4.4/711-spi-qup-Fix-transaction-done-signaling.patch30
-rw-r--r--target/linux/ipq806x/patches-4.4/711-stmmac-fix-ipq806x-DMA-configuration.patch117
-rw-r--r--target/linux/ipq806x/patches-4.4/712-spi-qup-Fix-DMA-mode-to-work-correctly.patch221
-rw-r--r--target/linux/ipq806x/patches-4.4/713-spi-qup-Fix-block-mode-to-work-correctly.patch312
-rw-r--r--target/linux/ipq806x/patches-4.4/714-spi-qup-properly-detect-extra-interrupts.patch62
-rw-r--r--target/linux/ipq806x/patches-4.4/715-spi-qup-don-t-re-read-opflags-to-see-if-transaction-.patch27
-rw-r--r--target/linux/ipq806x/patches-4.4/800-devicetree.patch29
-rw-r--r--target/linux/ipq806x/patches-4.4/801-override-compiler-flags.patch11
-rw-r--r--target/linux/ipq806x/patches-4.4/802-GPIO-add-named-gpio-exports.patch166
-rw-r--r--target/linux/ipq806x/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch185
128 files changed, 0 insertions, 22377 deletions
diff --git a/target/linux/ipq806x/config-4.4 b/target/linux/ipq806x/config-4.4
deleted file mode 100644
index 898e32ff03..0000000000
--- a/target/linux/ipq806x/config-4.4
+++ /dev/null
@@ -1,426 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_AMBA_PL08X is not set
-CONFIG_APQ_GCC_8084=y
-CONFIG_APQ_MMCC_8084=y
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_QCOM=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_QCOM_CPUFREQ=y
-CONFIG_ARM_QCOM_CPUIDLE=y
-# CONFIG_ARM_SMMU is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT803X_PHY=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLKSRC_QCOM=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-# CONFIG_DWMAC_GENERIC is not set
-CONFIG_DWMAC_IPQ806X=y
-# CONFIG_DWMAC_SUNXI is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HWMON=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MSM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_QUP=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IPQ_GCC_806X=y
-# CONFIG_IPQ_LCC_806X is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KPSS_XCC=y
-CONFIG_KRAITCC=y
-CONFIG_KRAIT_CLOCKS=y
-CONFIG_KRAIT_L2_ACCESSORS=y
-CONFIG_LIBFDT=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MFD_QCOM_RPM=y
-# CONFIG_MFD_SPMI_PMIC is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=16
-CONFIG_MMC_QCOM_DML=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_MSM=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MSM_GCC_8660=y
-# CONFIG_MSM_GCC_8916 is not set
-CONFIG_MSM_GCC_8960=y
-CONFIG_MSM_GCC_8974=y
-# CONFIG_MSM_LCC_8960 is not set
-CONFIG_MSM_MMCC_8960=y
-CONFIG_MSM_MMCC_8974=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_QCOM=y
-CONFIG_MTD_QCOM_SMEM_PARTS=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_AR8XXX is not set
-CONFIG_NET_DSA_HWMON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_QCOM_APQ8064_SATA is not set
-CONFIG_PHY_QCOM_IPQ806X_SATA=y
-# CONFIG_PHY_QCOM_UFS is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_APQ8064=y
-# CONFIG_PINCTRL_APQ8084 is not set
-CONFIG_PINCTRL_IPQ8064=y
-CONFIG_PINCTRL_MSM=y
-# CONFIG_PINCTRL_MSM8660 is not set
-# CONFIG_PINCTRL_MSM8916 is not set
-# CONFIG_PINCTRL_MSM8960 is not set
-CONFIG_PINCTRL_MSM8X74=y
-# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
-# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
-# CONFIG_PL330_DMA is not set
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_MSM=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_QCOM_ADM=y
-CONFIG_QCOM_BAM_DMA=y
-CONFIG_QCOM_CLK_RPM=y
-CONFIG_QCOM_GDSC=y
-CONFIG_QCOM_GSBI=y
-CONFIG_QCOM_HFPLL=y
-CONFIG_QCOM_PM=y
-CONFIG_QCOM_QFPROM=y
-CONFIG_QCOM_RPMCC=y
-CONFIG_QCOM_SCM=y
-CONFIG_QCOM_SCM_32=y
-# CONFIG_QCOM_SMD is not set
-CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_TSENS=y
-CONFIG_QCOM_WDT=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_QCOM_RPM=y
-# CONFIG_REGULATOR_QCOM_SPMI is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_QUP=y
-CONFIG_SPMI=y
-CONFIG_SPMI_MSM_PMIC_ARB=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VDSO=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WATCHDOG_SYSFS is not set
-# CONFIG_WL_TI is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ipq806x/patches-4.4/001-add-API-register-brd-clks-bckwrds-cmptblt.patch b/target/linux/ipq806x/patches-4.4/001-add-API-register-brd-clks-bckwrds-cmptblt.patch
deleted file mode 100644
index b9056e9618..0000000000
--- a/target/linux/ipq806x/patches-4.4/001-add-API-register-brd-clks-bckwrds-cmptblt.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From ee15faffef11309219aa87a24efc86f6dd13f7cb Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Mon, 26 Oct 2015 17:11:32 -0700
-Subject: clk: qcom: common: Add API to register board clocks backwards
- compatibly
-
-We want to put the XO board clocks into the dt files, but we also
-need to be backwards compatible with an older dtb. Add an API to
-the common code to do this. This also makes a place for us to
-handle the case when the RPM clock driver is enabled and we don't
-want to register the fixed factor clock.
-
-Cc: Georgi Djakov <georgi.djakov@linaro.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/qcom/common.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++
- drivers/clk/qcom/common.h | 4 +++
- 2 files changed, 91 insertions(+)
-
---- a/drivers/clk/qcom/common.c
-+++ b/drivers/clk/qcom/common.c
-@@ -17,6 +17,7 @@
- #include <linux/platform_device.h>
- #include <linux/clk-provider.h>
- #include <linux/reset-controller.h>
-+#include <linux/of.h>
-
- #include "common.h"
- #include "clk-rcg.h"
-@@ -88,6 +89,92 @@ static void qcom_cc_gdsc_unregister(void
- gdsc_unregister(data);
- }
-
-+/*
-+ * Backwards compatibility with old DTs. Register a pass-through factor 1/1
-+ * clock to translate 'path' clk into 'name' clk and regsiter the 'path'
-+ * clk as a fixed rate clock if it isn't present.
-+ */
-+static int _qcom_cc_register_board_clk(struct device *dev, const char *path,
-+ const char *name, unsigned long rate,
-+ bool add_factor)
-+{
-+ struct device_node *node = NULL;
-+ struct device_node *clocks_node;
-+ struct clk_fixed_factor *factor;
-+ struct clk_fixed_rate *fixed;
-+ struct clk *clk;
-+ struct clk_init_data init_data = { };
-+
-+ clocks_node = of_find_node_by_path("/clocks");
-+ if (clocks_node)
-+ node = of_find_node_by_name(clocks_node, path);
-+ of_node_put(clocks_node);
-+
-+ if (!node) {
-+ fixed = devm_kzalloc(dev, sizeof(*fixed), GFP_KERNEL);
-+ if (!fixed)
-+ return -EINVAL;
-+
-+ fixed->fixed_rate = rate;
-+ fixed->hw.init = &init_data;
-+
-+ init_data.name = path;
-+ init_data.flags = CLK_IS_ROOT;
-+ init_data.ops = &clk_fixed_rate_ops;
-+
-+ clk = devm_clk_register(dev, &fixed->hw);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+ }
-+ of_node_put(node);
-+
-+ if (add_factor) {
-+ factor = devm_kzalloc(dev, sizeof(*factor), GFP_KERNEL);
-+ if (!factor)
-+ return -EINVAL;
-+
-+ factor->mult = factor->div = 1;
-+ factor->hw.init = &init_data;
-+
-+ init_data.name = name;
-+ init_data.parent_names = &path;
-+ init_data.num_parents = 1;
-+ init_data.flags = 0;
-+ init_data.ops = &clk_fixed_factor_ops;
-+
-+ clk = devm_clk_register(dev, &factor->hw);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+ }
-+
-+ return 0;
-+}
-+
-+int qcom_cc_register_board_clk(struct device *dev, const char *path,
-+ const char *name, unsigned long rate)
-+{
-+ bool add_factor = true;
-+ struct device_node *node;
-+
-+ /* The RPM clock driver will add the factor clock if present */
-+ if (IS_ENABLED(CONFIG_QCOM_RPMCC)) {
-+ node = of_find_compatible_node(NULL, NULL, "qcom,rpmcc");
-+ if (of_device_is_available(node))
-+ add_factor = false;
-+ of_node_put(node);
-+ }
-+
-+ return _qcom_cc_register_board_clk(dev, path, name, rate, add_factor);
-+}
-+EXPORT_SYMBOL_GPL(qcom_cc_register_board_clk);
-+
-+int qcom_cc_register_sleep_clk(struct device *dev)
-+{
-+ return _qcom_cc_register_board_clk(dev, "sleep_clk", "sleep_clk_src",
-+ 32768, true);
-+}
-+EXPORT_SYMBOL_GPL(qcom_cc_register_sleep_clk);
-+
- int qcom_cc_really_probe(struct platform_device *pdev,
- const struct qcom_cc_desc *desc, struct regmap *regmap)
- {
---- a/drivers/clk/qcom/common.h
-+++ b/drivers/clk/qcom/common.h
-@@ -37,6 +37,10 @@ extern const struct freq_tbl *qcom_find_
- extern int qcom_find_src_index(struct clk_hw *hw, const struct parent_map *map,
- u8 src);
-
-+extern int qcom_cc_register_board_clk(struct device *dev, const char *path,
-+ const char *name, unsigned long rate);
-+extern int qcom_cc_register_sleep_clk(struct device *dev);
-+
- extern struct regmap *qcom_cc_map(struct platform_device *pdev,
- const struct qcom_cc_desc *desc);
- extern int qcom_cc_really_probe(struct platform_device *pdev,
diff --git a/target/linux/ipq806x/patches-4.4/002-make-reset-control-ops-const.patch b/target/linux/ipq806x/patches-4.4/002-make-reset-control-ops-const.patch
deleted file mode 100644
index 6261125473..0000000000
--- a/target/linux/ipq806x/patches-4.4/002-make-reset-control-ops-const.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From add479eeb1a208a31ab913ae7c97506a81383079 Mon Sep 17 00:00:00 2001
-From: Philipp Zabel <p.zabel@pengutronix.de>
-Date: Thu, 25 Feb 2016 10:45:12 +0100
-Subject: clk: qcom: Make reset_control_ops const
-
-The qcom_reset_ops structure is never modified. Make it const.
-
-Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/qcom/reset.c | 2 +-
- drivers/clk/qcom/reset.h | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/qcom/reset.c
-+++ b/drivers/clk/qcom/reset.c
-@@ -55,7 +55,7 @@ qcom_reset_deassert(struct reset_control
- return regmap_update_bits(rst->regmap, map->reg, mask, 0);
- }
-
--struct reset_control_ops qcom_reset_ops = {
-+const struct reset_control_ops qcom_reset_ops = {
- .reset = qcom_reset,
- .assert = qcom_reset_assert,
- .deassert = qcom_reset_deassert,
---- a/drivers/clk/qcom/reset.h
-+++ b/drivers/clk/qcom/reset.h
-@@ -32,6 +32,6 @@ struct qcom_reset_controller {
- #define to_qcom_reset_controller(r) \
- container_of(r, struct qcom_reset_controller, rcdev);
-
--extern struct reset_control_ops qcom_reset_ops;
-+extern const struct reset_control_ops qcom_reset_ops;
-
- #endif
diff --git a/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch b/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch
deleted file mode 100644
index 4932e702a2..0000000000
--- a/target/linux/ipq806x/patches-4.4/003-mv-cxo-pxo-xo-into-DT.patch
+++ /dev/null
@@ -1,172 +0,0 @@
-From a085f877a882b465fce74188c9d8efd12bd5acd4 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Mon, 26 Oct 2015 18:10:09 -0700
-Subject: clk: qcom: Move cxo/pxo/xo into dt files
-
-Put these clocks into the dt files instead of registering them
-from C code. This provides a few benefits. It allows us to
-specify the frequency of these clocks at the board level instead
-of hard-coding them in the driver. It allows us to insert an RPM
-clock in between the consumers of the crystals and the actual
-clock. And finally, it helps us transition the GCC driver to use
-RPM clocks when that configuration is enabled.
-
-Cc: Georgi Djakov <georgi.djakov@linaro.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/qcom/gcc-apq8084.c | 16 +++++++---------
- drivers/clk/qcom/gcc-ipq806x.c | 14 ++++++--------
- drivers/clk/qcom/gcc-msm8660.c | 15 +++++++--------
- drivers/clk/qcom/gcc-msm8960.c | 14 ++++++--------
- drivers/clk/qcom/gcc-msm8974.c | 17 +++++++----------
- 5 files changed, 33 insertions(+), 43 deletions(-)
-
---- a/drivers/clk/qcom/gcc-apq8084.c
-+++ b/drivers/clk/qcom/gcc-apq8084.c
-@@ -3607,18 +3607,16 @@ MODULE_DEVICE_TABLE(of, gcc_apq8084_matc
-
- static int gcc_apq8084_probe(struct platform_device *pdev)
- {
-- struct clk *clk;
-+ int ret;
- struct device *dev = &pdev->dev;
-
-- /* Temporary until RPM clocks supported */
-- clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
-+ if (ret)
-+ return ret;
-
-- clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
-- CLK_IS_ROOT, 32768);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_sleep_clk(dev);
-+ if (ret)
-+ return ret;
-
- return qcom_cc_probe(pdev, &gcc_apq8084_desc);
- }
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -3023,19 +3023,17 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_matc
-
- static int gcc_ipq806x_probe(struct platform_device *pdev)
- {
-- struct clk *clk;
- struct device *dev = &pdev->dev;
- struct regmap *regmap;
- int ret;
-
-- /* Temporary until RPM clocks supported */
-- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000);
-+ if (ret)
-+ return ret;
-
-- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 25000000);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000);
-+ if (ret)
-+ return ret;
-
- ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
- if (ret)
---- a/drivers/clk/qcom/gcc-msm8660.c
-+++ b/drivers/clk/qcom/gcc-msm8660.c
-@@ -2720,17 +2720,16 @@ MODULE_DEVICE_TABLE(of, gcc_msm8660_matc
-
- static int gcc_msm8660_probe(struct platform_device *pdev)
- {
-- struct clk *clk;
-+ int ret;
- struct device *dev = &pdev->dev;
-
-- /* Temporary until RPM clocks supported */
-- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
-+ if (ret)
-+ return ret;
-
-- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
-+ if (ret)
-+ return ret;
-
- return qcom_cc_probe(pdev, &gcc_msm8660_desc);
- }
---- a/drivers/clk/qcom/gcc-msm8960.c
-+++ b/drivers/clk/qcom/gcc-msm8960.c
-@@ -3503,7 +3503,6 @@ MODULE_DEVICE_TABLE(of, gcc_msm8960_matc
-
- static int gcc_msm8960_probe(struct platform_device *pdev)
- {
-- struct clk *clk;
- struct device *dev = &pdev->dev;
- const struct of_device_id *match;
- struct platform_device *tsens;
-@@ -3513,14 +3512,13 @@ static int gcc_msm8960_probe(struct plat
- if (!match)
- return -EINVAL;
-
-- /* Temporary until RPM clocks supported */
-- clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 19200000);
-+ if (ret)
-+ return ret;
-
-- clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 27000000);
-+ if (ret)
-+ return ret;
-
- ret = qcom_cc_probe(pdev, match->data);
- if (ret)
---- a/drivers/clk/qcom/gcc-msm8974.c
-+++ b/drivers/clk/qcom/gcc-msm8974.c
-@@ -2717,7 +2717,7 @@ static void msm8974_pro_clock_override(v
-
- static int gcc_msm8974_probe(struct platform_device *pdev)
- {
-- struct clk *clk;
-+ int ret;
- struct device *dev = &pdev->dev;
- bool pro;
- const struct of_device_id *id;
-@@ -2730,16 +2730,13 @@ static int gcc_msm8974_probe(struct plat
- if (pro)
- msm8974_pro_clock_override();
-
-- /* Temporary until RPM clocks supported */
-- clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
--
-- /* Should move to DT node? */
-- clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
-- CLK_IS_ROOT, 32768);
-- if (IS_ERR(clk))
-- return PTR_ERR(clk);
-+ ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000);
-+ if (ret)
-+ return ret;
-+
-+ ret = qcom_cc_register_sleep_clk(dev);
-+ if (ret)
-+ return ret;
-
- return qcom_cc_probe(pdev, &gcc_msm8974_desc);
- }
diff --git a/target/linux/ipq806x/patches-4.4/005-mfd-qcom_rpm-Add-missing-of_node_put-after-calling-of_parse_phandle.patch b/target/linux/ipq806x/patches-4.4/005-mfd-qcom_rpm-Add-missing-of_node_put-after-calling-of_parse_phandle.patch
deleted file mode 100644
index b3cef7b3fd..0000000000
--- a/target/linux/ipq806x/patches-4.4/005-mfd-qcom_rpm-Add-missing-of_node_put-after-calling-of_parse_phandle.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 349290fc9e761aaef6d6882721189f668ec5ff49 Mon Sep 17 00:00:00 2001
-From: Peter Chen <peter.chen@nxp.com>
-Date: Fri, 15 Jul 2016 17:38:46 +0800
-Subject: mfd: qcom_rpm: Add missing of_node_put after calling of_parse_phandle
-
-of_node_put needs to be called when the device node which is got
-from of_parse_phandle has finished using.
-
-Signed-off-by: Peter Chen <peter.chen@nxp.com>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
----
- drivers/mfd/qcom_rpm.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mfd/qcom_rpm.c
-+++ b/drivers/mfd/qcom_rpm.c
-@@ -538,6 +538,7 @@ static int qcom_rpm_probe(struct platfor
- }
-
- rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
-+ of_node_put(syscon_np);
- if (IS_ERR(rpm->ipc_regmap))
- return PTR_ERR(rpm->ipc_regmap);
-
diff --git a/target/linux/ipq806x/patches-4.4/006-mfd-qcom_rpm-Handle-message-RAM-clock.patch b/target/linux/ipq806x/patches-4.4/006-mfd-qcom_rpm-Handle-message-RAM-clock.patch
deleted file mode 100644
index 96b768d97c..0000000000
--- a/target/linux/ipq806x/patches-4.4/006-mfd-qcom_rpm-Handle-message-RAM-clock.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 3526403353c2a1b94c3181f900582626d23c339b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 18 Aug 2016 20:40:45 +0200
-Subject: mfd: qcom_rpm: Handle message RAM clock
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock
-to the message RAM used by the RPM. This needs to be enabled
-for messages to pass through. This is a crude solution that
-simply prepare/enable at probe() and disable/unprepare
-at remove(). More elaborate PM is probably possible to
-add later.
-
-The construction uses IS_ERR() to gracefully handle the
-platforms that do not provide a message RAM clock. It will
-bail out of probe only if the clock is hitting a probe
-deferral situation.
-
-Of course this requires the proper device tree set-up:
-
-rpm: rpm@104000 {
- compatible = "qcom,rpm-msm8660";
- clocks = <&gcc RPM_MSG_RAM_H_CLK>;
- clock-names = "ram";
- ...
-};
-
-I have provided this in the MSM8660 device tree, and will
-provide patches for the other targets.
-
-Cc: Björn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
----
- drivers/mfd/qcom_rpm.c | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/drivers/mfd/qcom_rpm.c
-+++ b/drivers/mfd/qcom_rpm.c
-@@ -21,6 +21,7 @@
- #include <linux/mfd/qcom_rpm.h>
- #include <linux/mfd/syscon.h>
- #include <linux/regmap.h>
-+#include <linux/clk.h>
-
- #include <dt-bindings/mfd/qcom-rpm.h>
-
-@@ -48,6 +49,7 @@ struct qcom_rpm {
- struct regmap *ipc_regmap;
- unsigned ipc_offset;
- unsigned ipc_bit;
-+ struct clk *ramclk;
-
- struct completion ack;
- struct mutex lock;
-@@ -503,6 +505,20 @@ static int qcom_rpm_probe(struct platfor
- mutex_init(&rpm->lock);
- init_completion(&rpm->ack);
-
-+ /* Enable message RAM clock */
-+ rpm->ramclk = devm_clk_get(&pdev->dev, "ram");
-+ if (IS_ERR(rpm->ramclk)) {
-+ ret = PTR_ERR(rpm->ramclk);
-+ if (ret == -EPROBE_DEFER)
-+ return ret;
-+ /*
-+ * Fall through in all other cases, as the clock is
-+ * optional. (Does not exist on all platforms.)
-+ */
-+ rpm->ramclk = NULL;
-+ }
-+ clk_prepare_enable(rpm->ramclk); /* Accepts NULL */
-+
- irq_ack = platform_get_irq_byname(pdev, "ack");
- if (irq_ack < 0) {
- dev_err(&pdev->dev, "required ack interrupt missing\n");
-@@ -621,7 +637,11 @@ static int qcom_rpm_probe(struct platfor
-
- static int qcom_rpm_remove(struct platform_device *pdev)
- {
-+ struct qcom_rpm *rpm = dev_get_drvdata(&pdev->dev);
-+
- of_platform_depopulate(&pdev->dev);
-+ clk_disable_unprepare(rpm->ramclk);
-+
- return 0;
- }
-
diff --git a/target/linux/ipq806x/patches-4.4/009-1-watchdog-core-add-restart-handler-support.patch b/target/linux/ipq806x/patches-4.4/009-1-watchdog-core-add-restart-handler-support.patch
deleted file mode 100644
index 0534e78a27..0000000000
--- a/target/linux/ipq806x/patches-4.4/009-1-watchdog-core-add-restart-handler-support.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From 2165bf524da5f5e496d1cdb8c5afae1345ecce1e Mon Sep 17 00:00:00 2001
-From: Damien Riegel <damien.riegel@savoirfairelinux.com>
-Date: Mon, 16 Nov 2015 12:27:59 -0500
-Subject: watchdog: core: add restart handler support
-
-Many watchdog drivers implement the same code to register a restart
-handler. This patch provides a generic way to set such a function.
-
-The patch adds a new restart watchdog operation. If a restart priority
-greater than 0 is needed, the driver can call
-watchdog_set_restart_priority to set it.
-
-Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
-Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- Documentation/watchdog/watchdog-kernel-api.txt | 19 ++++++++++
- drivers/watchdog/watchdog_core.c | 48 ++++++++++++++++++++++++++
- include/linux/watchdog.h | 6 ++++
- 3 files changed, 73 insertions(+)
-
---- a/Documentation/watchdog/watchdog-kernel-api.txt
-+++ b/Documentation/watchdog/watchdog-kernel-api.txt
-@@ -53,6 +53,7 @@ struct watchdog_device {
- unsigned int timeout;
- unsigned int min_timeout;
- unsigned int max_timeout;
-+ struct notifier_block restart_nb;
- void *driver_data;
- struct mutex lock;
- unsigned long status;
-@@ -75,6 +76,10 @@ It contains following fields:
- * timeout: the watchdog timer's timeout value (in seconds).
- * min_timeout: the watchdog timer's minimum timeout value (in seconds).
- * max_timeout: the watchdog timer's maximum timeout value (in seconds).
-+* restart_nb: notifier block that is registered for machine restart, for
-+ internal use only. If a watchdog is capable of restarting the machine, it
-+ should define ops->restart. Priority can be changed through
-+ watchdog_set_restart_priority.
- * bootstatus: status of the device after booting (reported with watchdog
- WDIOF_* status bits).
- * driver_data: a pointer to the drivers private data of a watchdog device.
-@@ -100,6 +105,7 @@ struct watchdog_ops {
- unsigned int (*status)(struct watchdog_device *);
- int (*set_timeout)(struct watchdog_device *, unsigned int);
- unsigned int (*get_timeleft)(struct watchdog_device *);
-+ int (*restart)(struct watchdog_device *);
- void (*ref)(struct watchdog_device *);
- void (*unref)(struct watchdog_device *);
- long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
-@@ -164,6 +170,8 @@ they are supported. These optional routi
- (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the
- watchdog's info structure).
- * get_timeleft: this routines returns the time that's left before a reset.
-+* restart: this routine restarts the machine. It returns 0 on success or a
-+ negative errno code for failure.
- * ref: the operation that calls kref_get on the kref of a dynamically
- allocated watchdog_device struct.
- * unref: the operation that calls kref_put on the kref of a dynamically
-@@ -231,3 +239,14 @@ the device tree (if the module timeout p
- to set the default timeout value as timeout value in the watchdog_device and
- then use this function to set the user "preferred" timeout value.
- This routine returns zero on success and a negative errno code for failure.
-+
-+To change the priority of the restart handler the following helper should be
-+used:
-+
-+void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority);
-+
-+User should follow the following guidelines for setting the priority:
-+* 0: should be called in last resort, has limited restart capabilities
-+* 128: default restart handler, use if no other handler is expected to be
-+ available, and/or if restart is sufficient to restart the entire system
-+* 255: highest priority, will preempt all other restart handlers
---- a/drivers/watchdog/watchdog_core.c
-+++ b/drivers/watchdog/watchdog_core.c
-@@ -32,6 +32,7 @@
- #include <linux/types.h> /* For standard types */
- #include <linux/errno.h> /* For the -ENODEV/... values */
- #include <linux/kernel.h> /* For printk/panic/... */
-+#include <linux/reboot.h> /* For restart handler */
- #include <linux/watchdog.h> /* For watchdog specific items */
- #include <linux/init.h> /* For __init/__exit/... */
- #include <linux/idr.h> /* For ida_* macros */
-@@ -137,6 +138,41 @@ int watchdog_init_timeout(struct watchdo
- }
- EXPORT_SYMBOL_GPL(watchdog_init_timeout);
-
-+static int watchdog_restart_notifier(struct notifier_block *nb,
-+ unsigned long action, void *data)
-+{
-+ struct watchdog_device *wdd = container_of(nb, struct watchdog_device,
-+ restart_nb);
-+
-+ int ret;
-+
-+ ret = wdd->ops->restart(wdd);
-+ if (ret)
-+ return NOTIFY_BAD;
-+
-+ return NOTIFY_DONE;
-+}
-+
-+/**
-+ * watchdog_set_restart_priority - Change priority of restart handler
-+ * @wdd: watchdog device
-+ * @priority: priority of the restart handler, should follow these guidelines:
-+ * 0: use watchdog's restart function as last resort, has limited restart
-+ * capabilies
-+ * 128: default restart handler, use if no other handler is expected to be
-+ * available and/or if restart is sufficient to restart the entire system
-+ * 255: preempt all other handlers
-+ *
-+ * If a wdd->ops->restart function is provided when watchdog_register_device is
-+ * called, it will be registered as a restart handler with the priority given
-+ * here.
-+ */
-+void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority)
-+{
-+ wdd->restart_nb.priority = priority;
-+}
-+EXPORT_SYMBOL_GPL(watchdog_set_restart_priority);
-+
- static int __watchdog_register_device(struct watchdog_device *wdd)
- {
- int ret, id = -1, devno;
-@@ -202,6 +238,15 @@ static int __watchdog_register_device(st
- return ret;
- }
-
-+ if (wdd->ops->restart) {
-+ wdd->restart_nb.notifier_call = watchdog_restart_notifier;
-+
-+ ret = register_restart_handler(&wdd->restart_nb);
-+ if (ret)
-+ dev_warn(wdd->dev, "Cannot register restart handler (%d)\n",
-+ ret);
-+ }
-+
- return 0;
- }
-
-@@ -238,6 +283,9 @@ static void __watchdog_unregister_device
- if (wdd == NULL)
- return;
-
-+ if (wdd->ops->restart)
-+ unregister_restart_handler(&wdd->restart_nb);
-+
- devno = wdd->cdev.dev;
- ret = watchdog_dev_unregister(wdd);
- if (ret)
---- a/include/linux/watchdog.h
-+++ b/include/linux/watchdog.h
-@@ -12,6 +12,7 @@
- #include <linux/bitops.h>
- #include <linux/device.h>
- #include <linux/cdev.h>
-+#include <linux/notifier.h>
- #include <uapi/linux/watchdog.h>
-
- struct watchdog_ops;
-@@ -26,6 +27,7 @@ struct watchdog_device;
- * @status: The routine that shows the status of the watchdog device.
- * @set_timeout:The routine for setting the watchdog devices timeout value (in seconds).
- * @get_timeleft:The routine that gets the time left before a reset (in seconds).
-+ * @restart: The routine for restarting the machine.
- * @ref: The ref operation for dyn. allocated watchdog_device structs
- * @unref: The unref operation for dyn. allocated watchdog_device structs
- * @ioctl: The routines that handles extra ioctl calls.
-@@ -45,6 +47,7 @@ struct watchdog_ops {
- unsigned int (*status)(struct watchdog_device *);
- int (*set_timeout)(struct watchdog_device *, unsigned int);
- unsigned int (*get_timeleft)(struct watchdog_device *);
-+ int (*restart)(struct watchdog_device *);
- void (*ref)(struct watchdog_device *);
- void (*unref)(struct watchdog_device *);
- long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
-@@ -62,6 +65,7 @@ struct watchdog_ops {
- * @timeout: The watchdog devices timeout value (in seconds).
- * @min_timeout:The watchdog devices minimum timeout value (in seconds).
- * @max_timeout:The watchdog devices maximum timeout value (in seconds).
-+ * @restart_nb: The notifier block to register a restart function.
- * @driver-data:Pointer to the drivers private data.
- * @lock: Lock for watchdog core internal use only.
- * @status: Field that contains the devices internal status bits.
-@@ -88,6 +92,7 @@ struct watchdog_device {
- unsigned int timeout;
- unsigned int min_timeout;
- unsigned int max_timeout;
-+ struct notifier_block restart_nb;
- void *driver_data;
- struct mutex lock;
- unsigned long status;
-@@ -142,6 +147,7 @@ static inline void *watchdog_get_drvdata
- }
-
- /* drivers/watchdog/watchdog_core.c */
-+void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority);
- extern int watchdog_init_timeout(struct watchdog_device *wdd,
- unsigned int timeout_parm, struct device *dev);
- extern int watchdog_register_device(struct watchdog_device *);
diff --git a/target/linux/ipq806x/patches-4.4/009-2-watchdog-core-add-reboot-notifier-support.patch b/target/linux/ipq806x/patches-4.4/009-2-watchdog-core-add-reboot-notifier-support.patch
deleted file mode 100644
index 2afa4e566b..0000000000
--- a/target/linux/ipq806x/patches-4.4/009-2-watchdog-core-add-reboot-notifier-support.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From e131319669e0ef5e6fcd75174daeffa40492135c Mon Sep 17 00:00:00 2001
-From: Damien Riegel <damien.riegel@savoirfairelinux.com>
-Date: Fri, 20 Nov 2015 16:54:51 -0500
-Subject: watchdog: core: add reboot notifier support
-
-Many watchdog drivers register a reboot notifier in order to stop the
-watchdog on system reboot. Thus we can factorize this code in the
-watchdog core.
-
-For that purpose, a new notifier block is added in watchdog_device for
-internal use only, as well as a new watchdog_stop_on_reboot helper
-function.
-
-If this helper is called, watchdog core registers the related notifier
-block and will stop the watchdog when SYS_HALT or SYS_DOWN is received.
-
-Since this operation can be critical on some platforms, abort the device
-registration if the reboot notifier registration fails.
-
-Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
-Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
-Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- Documentation/watchdog/watchdog-kernel-api.txt | 8 ++++++
- drivers/watchdog/watchdog_core.c | 37 ++++++++++++++++++++++++++
- include/linux/watchdog.h | 9 +++++++
- 3 files changed, 54 insertions(+)
-
---- a/Documentation/watchdog/watchdog-kernel-api.txt
-+++ b/Documentation/watchdog/watchdog-kernel-api.txt
-@@ -53,6 +53,7 @@ struct watchdog_device {
- unsigned int timeout;
- unsigned int min_timeout;
- unsigned int max_timeout;
-+ struct notifier_block reboot_nb;
- struct notifier_block restart_nb;
- void *driver_data;
- struct mutex lock;
-@@ -76,6 +77,9 @@ It contains following fields:
- * timeout: the watchdog timer's timeout value (in seconds).
- * min_timeout: the watchdog timer's minimum timeout value (in seconds).
- * max_timeout: the watchdog timer's maximum timeout value (in seconds).
-+* reboot_nb: notifier block that is registered for reboot notifications, for
-+ internal use only. If the driver calls watchdog_stop_on_reboot, watchdog core
-+ will stop the watchdog on such notifications.
- * restart_nb: notifier block that is registered for machine restart, for
- internal use only. If a watchdog is capable of restarting the machine, it
- should define ops->restart. Priority can be changed through
-@@ -240,6 +244,10 @@ to set the default timeout value as time
- then use this function to set the user "preferred" timeout value.
- This routine returns zero on success and a negative errno code for failure.
-
-+To disable the watchdog on reboot, the user must call the following helper:
-+
-+static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd);
-+
- To change the priority of the restart handler the following helper should be
- used:
-
---- a/drivers/watchdog/watchdog_core.c
-+++ b/drivers/watchdog/watchdog_core.c
-@@ -138,6 +138,25 @@ int watchdog_init_timeout(struct watchdo
- }
- EXPORT_SYMBOL_GPL(watchdog_init_timeout);
-
-+static int watchdog_reboot_notifier(struct notifier_block *nb,
-+ unsigned long code, void *data)
-+{
-+ struct watchdog_device *wdd = container_of(nb, struct watchdog_device,
-+ reboot_nb);
-+
-+ if (code == SYS_DOWN || code == SYS_HALT) {
-+ if (watchdog_active(wdd)) {
-+ int ret;
-+
-+ ret = wdd->ops->stop(wdd);
-+ if (ret)
-+ return NOTIFY_BAD;
-+ }
-+ }
-+
-+ return NOTIFY_DONE;
-+}
-+
- static int watchdog_restart_notifier(struct notifier_block *nb,
- unsigned long action, void *data)
- {
-@@ -238,6 +257,21 @@ static int __watchdog_register_device(st
- return ret;
- }
-
-+ if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
-+ wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
-+
-+ ret = register_reboot_notifier(&wdd->reboot_nb);
-+ if (ret) {
-+ dev_err(wdd->dev, "Cannot register reboot notifier (%d)\n",
-+ ret);
-+ watchdog_dev_unregister(wdd);
-+ device_destroy(watchdog_class, devno);
-+ ida_simple_remove(&watchdog_ida, wdd->id);
-+ wdd->dev = NULL;
-+ return ret;
-+ }
-+ }
-+
- if (wdd->ops->restart) {
- wdd->restart_nb.notifier_call = watchdog_restart_notifier;
-
-@@ -286,6 +320,9 @@ static void __watchdog_unregister_device
- if (wdd->ops->restart)
- unregister_restart_handler(&wdd->restart_nb);
-
-+ if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status))
-+ unregister_reboot_notifier(&wdd->reboot_nb);
-+
- devno = wdd->cdev.dev;
- ret = watchdog_dev_unregister(wdd);
- if (ret)
---- a/include/linux/watchdog.h
-+++ b/include/linux/watchdog.h
-@@ -65,6 +65,7 @@ struct watchdog_ops {
- * @timeout: The watchdog devices timeout value (in seconds).
- * @min_timeout:The watchdog devices minimum timeout value (in seconds).
- * @max_timeout:The watchdog devices maximum timeout value (in seconds).
-+ * @reboot_nb: The notifier block to stop watchdog on reboot.
- * @restart_nb: The notifier block to register a restart function.
- * @driver-data:Pointer to the drivers private data.
- * @lock: Lock for watchdog core internal use only.
-@@ -92,6 +93,7 @@ struct watchdog_device {
- unsigned int timeout;
- unsigned int min_timeout;
- unsigned int max_timeout;
-+ struct notifier_block reboot_nb;
- struct notifier_block restart_nb;
- void *driver_data;
- struct mutex lock;
-@@ -102,6 +104,7 @@ struct watchdog_device {
- #define WDOG_ALLOW_RELEASE 2 /* Did we receive the magic char ? */
- #define WDOG_NO_WAY_OUT 3 /* Is 'nowayout' feature set ? */
- #define WDOG_UNREGISTERED 4 /* Has the device been unregistered */
-+#define WDOG_STOP_ON_REBOOT 5 /* Should be stopped on reboot */
- struct list_head deferred;
- };
-
-@@ -121,6 +124,12 @@ static inline void watchdog_set_nowayout
- set_bit(WDOG_NO_WAY_OUT, &wdd->status);
- }
-
-+/* Use the following function to stop the watchdog on reboot */
-+static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd)
-+{
-+ set_bit(WDOG_STOP_ON_REBOOT, &wdd->status);
-+}
-+
- /* Use the following function to check if a timeout value is invalid */
- static inline bool watchdog_timeout_invalid(struct watchdog_device *wdd, unsigned int t)
- {
diff --git a/target/linux/ipq806x/patches-4.4/009-3-watchdog-Use-static-struct-class-watchdog_class-instead-of-pointer.patch b/target/linux/ipq806x/patches-4.4/009-3-watchdog-Use-static-struct-class-watchdog_class-instead-of-pointer.patch
deleted file mode 100644
index 1906a1f4e5..0000000000
--- a/target/linux/ipq806x/patches-4.4/009-3-watchdog-Use-static-struct-class-watchdog_class-instead-of-pointer.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From 906d7a5cfeda508e7361f021605579a00cd82815 Mon Sep 17 00:00:00 2001
-From: Pratyush Anand <panand@redhat.com>
-Date: Thu, 17 Dec 2015 17:53:58 +0530
-Subject: watchdog: Use static struct class watchdog_class in stead of pointer
-
-We need few sysfs attributes to know different status of a watchdog device.
-To do that, we need to associate .dev_groups with watchdog_class. So
-convert it from pointer to static.
-Putting this static struct in watchdog_dev.c, so that static device
-attributes defined in that file can be attached to it.
-
-Signed-off-by: Pratyush Anand <panand@redhat.com>
-Suggested-by: Guenter Roeck <linux@roeck-us.net>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/watchdog_core.c | 15 ++-------------
- drivers/watchdog/watchdog_core.h | 2 +-
- drivers/watchdog/watchdog_dev.c | 26 ++++++++++++++++++++++----
- 3 files changed, 25 insertions(+), 18 deletions(-)
-
---- a/drivers/watchdog/watchdog_core.c
-+++ b/drivers/watchdog/watchdog_core.c
-@@ -370,19 +370,9 @@ static int __init watchdog_deferred_regi
-
- static int __init watchdog_init(void)
- {
-- int err;
--
-- watchdog_class = class_create(THIS_MODULE, "watchdog");
-- if (IS_ERR(watchdog_class)) {
-- pr_err("couldn't create class\n");
-+ watchdog_class = watchdog_dev_init();
-+ if (IS_ERR(watchdog_class))
- return PTR_ERR(watchdog_class);
-- }
--
-- err = watchdog_dev_init();
-- if (err < 0) {
-- class_destroy(watchdog_class);
-- return err;
-- }
-
- watchdog_deferred_registration();
- return 0;
-@@ -391,7 +381,6 @@ static int __init watchdog_init(void)
- static void __exit watchdog_exit(void)
- {
- watchdog_dev_exit();
-- class_destroy(watchdog_class);
- ida_destroy(&watchdog_ida);
- }
-
---- a/drivers/watchdog/watchdog_core.h
-+++ b/drivers/watchdog/watchdog_core.h
-@@ -33,5 +33,5 @@
- */
- extern int watchdog_dev_register(struct watchdog_device *);
- extern int watchdog_dev_unregister(struct watchdog_device *);
--extern int __init watchdog_dev_init(void);
-+extern struct class * __init watchdog_dev_init(void);
- extern void __exit watchdog_dev_exit(void);
---- a/drivers/watchdog/watchdog_dev.c
-+++ b/drivers/watchdog/watchdog_dev.c
-@@ -581,18 +581,35 @@ int watchdog_dev_unregister(struct watch
- return 0;
- }
-
-+static struct class watchdog_class = {
-+ .name = "watchdog",
-+ .owner = THIS_MODULE,
-+};
-+
- /*
- * watchdog_dev_init: init dev part of watchdog core
- *
- * Allocate a range of chardev nodes to use for watchdog devices
- */
-
--int __init watchdog_dev_init(void)
-+struct class * __init watchdog_dev_init(void)
- {
-- int err = alloc_chrdev_region(&watchdog_devt, 0, MAX_DOGS, "watchdog");
-- if (err < 0)
-+ int err;
-+
-+ err = class_register(&watchdog_class);
-+ if (err < 0) {
-+ pr_err("couldn't register class\n");
-+ return ERR_PTR(err);
-+ }
-+
-+ err = alloc_chrdev_region(&watchdog_devt, 0, MAX_DOGS, "watchdog");
-+ if (err < 0) {
- pr_err("watchdog: unable to allocate char dev region\n");
-- return err;
-+ class_unregister(&watchdog_class);
-+ return ERR_PTR(err);
-+ }
-+
-+ return &watchdog_class;
- }
-
- /*
-@@ -604,4 +621,5 @@ int __init watchdog_dev_init(void)
- void __exit watchdog_dev_exit(void)
- {
- unregister_chrdev_region(watchdog_devt, MAX_DOGS);
-+ class_unregister(&watchdog_class);
- }
diff --git a/target/linux/ipq806x/patches-4.4/009-4-watchdog-Read-device-status-through-sysfs-attributes.patch b/target/linux/ipq806x/patches-4.4/009-4-watchdog-Read-device-status-through-sysfs-attributes.patch
deleted file mode 100644
index fd4b38a9fb..0000000000
--- a/target/linux/ipq806x/patches-4.4/009-4-watchdog-Read-device-status-through-sysfs-attributes.patch
+++ /dev/null
@@ -1,260 +0,0 @@
-From 33b711269ade3f6bc9d9d15e4343e6fa922d999b Mon Sep 17 00:00:00 2001
-From: Pratyush Anand <panand@redhat.com>
-Date: Thu, 17 Dec 2015 17:53:59 +0530
-Subject: watchdog: Read device status through sysfs attributes
-
-This patch adds following attributes to watchdog device's sysfs interface
-to read its different status.
-
-* state - reads whether device is active or not
-* identity - reads Watchdog device's identity string.
-* timeout - reads current timeout.
-* timeleft - reads timeleft before watchdog generates a reset
-* bootstatus - reads status of the watchdog device at boot
-* status - reads watchdog device's internal status bits
-* nowayout - reads whether nowayout feature was set or not
-
-Testing with iTCO_wdt:
- # cd /sys/class/watchdog/watchdog1/
- # ls
-bootstatus dev device identity nowayout power state
-subsystem timeleft timeout uevent
- # cat identity
-iTCO_wdt
- # cat timeout
-30
- # cat state
-inactive
- # echo > /dev/watchdog1
- # cat timeleft
-26
- # cat state
-active
- # cat bootstatus
-0
- # cat nowayout
-0
-
-Signed-off-by: Pratyush Anand <panand@redhat.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- Documentation/ABI/testing/sysfs-class-watchdog | 51 +++++++++++
- drivers/watchdog/Kconfig | 7 ++
- drivers/watchdog/watchdog_core.c | 2 +-
- drivers/watchdog/watchdog_dev.c | 114 +++++++++++++++++++++++++
- 4 files changed, 173 insertions(+), 1 deletion(-)
- create mode 100644 Documentation/ABI/testing/sysfs-class-watchdog
-
---- /dev/null
-+++ b/Documentation/ABI/testing/sysfs-class-watchdog
-@@ -0,0 +1,51 @@
-+What: /sys/class/watchdog/watchdogn/bootstatus
-+Date: August 2015
-+Contact: Wim Van Sebroeck <wim@iguana.be>
-+Description:
-+ It is a read only file. It contains status of the watchdog
-+ device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
-+ ioctl interface.
-+
-+What: /sys/class/watchdog/watchdogn/identity
-+Date: August 2015
-+Contact: Wim Van Sebroeck <wim@iguana.be>
-+Description:
-+ It is a read only file. It contains identity string of
-+ watchdog device.
-+
-+What: /sys/class/watchdog/watchdogn/nowayout
-+Date: August 2015
-+Contact: Wim Van Sebroeck <wim@iguana.be>
-+Description:
-+ It is a read only file. While reading, it gives '1' if that
-+ device supports nowayout feature else, it gives '0'.
-+
-+What: /sys/class/watchdog/watchdogn/state
-+Date: August 2015
-+Contact: Wim Van Sebroeck <wim@iguana.be>
-+Description:
-+ It is a read only file. It gives active/inactive status of
-+ watchdog device.
-+
-+What: /sys/class/watchdog/watchdogn/status
-+Date: August 2015
-+Contact: Wim Van Sebroeck <wim@iguana.be>
-+Description:
-+ It is a read only file. It contains watchdog device's
-+ internal status bits. It is equivalent to WDIOC_GETSTATUS
-+ of ioctl interface.
-+
-+What: /sys/class/watchdog/watchdogn/timeleft
-+Date: August 2015
-+Contact: Wim Van Sebroeck <wim@iguana.be>
-+Description:
-+ It is a read only file. It contains value of time left for
-+ reset generation. It is equivalent to WDIOC_GETTIMELEFT of
-+ ioctl interface.
-+
-+What: /sys/class/watchdog/watchdogn/timeout
-+Date: August 2015
-+Contact: Wim Van Sebroeck <wim@iguana.be>
-+Description:
-+ It is a read only file. It is read to know about current
-+ value of timeout programmed.
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -46,6 +46,13 @@ config WATCHDOG_NOWAYOUT
- get killed. If you say Y here, the watchdog cannot be stopped once
- it has been started.
-
-+config WATCHDOG_SYSFS
-+ bool "Read different watchdog information through sysfs"
-+ default n
-+ help
-+ Say Y here if you want to enable watchdog device status read through
-+ sysfs attributes.
-+
- #
- # General Watchdog drivers
- #
---- a/drivers/watchdog/watchdog_core.c
-+++ b/drivers/watchdog/watchdog_core.c
-@@ -249,7 +249,7 @@ static int __watchdog_register_device(st
-
- devno = wdd->cdev.dev;
- wdd->dev = device_create(watchdog_class, wdd->parent, devno,
-- NULL, "watchdog%d", wdd->id);
-+ wdd, "watchdog%d", wdd->id);
- if (IS_ERR(wdd->dev)) {
- watchdog_dev_unregister(wdd);
- ida_simple_remove(&watchdog_ida, id);
---- a/drivers/watchdog/watchdog_dev.c
-+++ b/drivers/watchdog/watchdog_dev.c
-@@ -247,6 +247,119 @@ out_timeleft:
- return err;
- }
-
-+#ifdef CONFIG_WATCHDOG_SYSFS
-+static ssize_t nowayout_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct watchdog_device *wdd = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%d\n", !!test_bit(WDOG_NO_WAY_OUT, &wdd->status));
-+}
-+static DEVICE_ATTR_RO(nowayout);
-+
-+static ssize_t status_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct watchdog_device *wdd = dev_get_drvdata(dev);
-+ ssize_t status;
-+ unsigned int val;
-+
-+ status = watchdog_get_status(wdd, &val);
-+ if (!status)
-+ status = sprintf(buf, "%u\n", val);
-+
-+ return status;
-+}
-+static DEVICE_ATTR_RO(status);
-+
-+static ssize_t bootstatus_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct watchdog_device *wdd = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%u\n", wdd->bootstatus);
-+}
-+static DEVICE_ATTR_RO(bootstatus);
-+
-+static ssize_t timeleft_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct watchdog_device *wdd = dev_get_drvdata(dev);
-+ ssize_t status;
-+ unsigned int val;
-+
-+ status = watchdog_get_timeleft(wdd, &val);
-+ if (!status)
-+ status = sprintf(buf, "%u\n", val);
-+
-+ return status;
-+}
-+static DEVICE_ATTR_RO(timeleft);
-+
-+static ssize_t timeout_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct watchdog_device *wdd = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%u\n", wdd->timeout);
-+}
-+static DEVICE_ATTR_RO(timeout);
-+
-+static ssize_t identity_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct watchdog_device *wdd = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%s\n", wdd->info->identity);
-+}
-+static DEVICE_ATTR_RO(identity);
-+
-+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct watchdog_device *wdd = dev_get_drvdata(dev);
-+
-+ if (watchdog_active(wdd))
-+ return sprintf(buf, "active\n");
-+
-+ return sprintf(buf, "inactive\n");
-+}
-+static DEVICE_ATTR_RO(state);
-+
-+static umode_t wdt_is_visible(struct kobject *kobj, struct attribute *attr,
-+ int n)
-+{
-+ struct device *dev = container_of(kobj, struct device, kobj);
-+ struct watchdog_device *wdd = dev_get_drvdata(dev);
-+ umode_t mode = attr->mode;
-+
-+ if (attr == &dev_attr_status.attr && !wdd->ops->status)
-+ mode = 0;
-+ else if (attr == &dev_attr_timeleft.attr && !wdd->ops->get_timeleft)
-+ mode = 0;
-+
-+ return mode;
-+}
-+static struct attribute *wdt_attrs[] = {
-+ &dev_attr_state.attr,
-+ &dev_attr_identity.attr,
-+ &dev_attr_timeout.attr,
-+ &dev_attr_timeleft.attr,
-+ &dev_attr_bootstatus.attr,
-+ &dev_attr_status.attr,
-+ &dev_attr_nowayout.attr,
-+ NULL,
-+};
-+
-+static const struct attribute_group wdt_group = {
-+ .attrs = wdt_attrs,
-+ .is_visible = wdt_is_visible,
-+};
-+__ATTRIBUTE_GROUPS(wdt);
-+#else
-+#define wdt_groups NULL
-+#endif
-+
- /*
- * watchdog_ioctl_op: call the watchdog drivers ioctl op if defined
- * @wdd: the watchdog device to do the ioctl on
-@@ -584,6 +697,7 @@ int watchdog_dev_unregister(struct watch
- static struct class watchdog_class = {
- .name = "watchdog",
- .owner = THIS_MODULE,
-+ .dev_groups = wdt_groups,
- };
-
- /*
diff --git a/target/linux/ipq806x/patches-4.4/009-5-watchdog-Create-watchdog-device-in-watchdog_dev-c.patch b/target/linux/ipq806x/patches-4.4/009-5-watchdog-Create-watchdog-device-in-watchdog_dev-c.patch
deleted file mode 100644
index 059ebdd823..0000000000
--- a/target/linux/ipq806x/patches-4.4/009-5-watchdog-Create-watchdog-device-in-watchdog_dev-c.patch
+++ /dev/null
@@ -1,261 +0,0 @@
-From 32ecc6392654a0db34b310e8924b5b2c3b8bf503 Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Fri, 25 Dec 2015 16:01:40 -0800
-Subject: watchdog: Create watchdog device in watchdog_dev.c
-
-The watchdog character device is currently created in watchdog_dev.c,
-and the watchdog device in watchdog_core.c. This results in
-cross-dependencies, since device creation needs to know the watchdog
-character device number as well as the watchdog class, both of which
-reside in watchdog_dev.c.
-
-Create the watchdog device in watchdog_dev.c to simplify the code.
-
-Inspired by earlier patch set from Damien Riegel.
-
-Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/watchdog_core.c | 33 ++++--------------
- drivers/watchdog/watchdog_core.h | 4 +--
- drivers/watchdog/watchdog_dev.c | 73 +++++++++++++++++++++++++++++++++-------
- 3 files changed, 69 insertions(+), 41 deletions(-)
-
---- a/drivers/watchdog/watchdog_core.c
-+++ b/drivers/watchdog/watchdog_core.c
-@@ -42,7 +42,6 @@
- #include "watchdog_core.h" /* For watchdog_dev_register/... */
-
- static DEFINE_IDA(watchdog_ida);
--static struct class *watchdog_class;
-
- /*
- * Deferred Registration infrastructure.
-@@ -194,7 +193,7 @@ EXPORT_SYMBOL_GPL(watchdog_set_restart_p
-
- static int __watchdog_register_device(struct watchdog_device *wdd)
- {
-- int ret, id = -1, devno;
-+ int ret, id = -1;
-
- if (wdd == NULL || wdd->info == NULL || wdd->ops == NULL)
- return -EINVAL;
-@@ -247,16 +246,6 @@ static int __watchdog_register_device(st
- }
- }
-
-- devno = wdd->cdev.dev;
-- wdd->dev = device_create(watchdog_class, wdd->parent, devno,
-- wdd, "watchdog%d", wdd->id);
-- if (IS_ERR(wdd->dev)) {
-- watchdog_dev_unregister(wdd);
-- ida_simple_remove(&watchdog_ida, id);
-- ret = PTR_ERR(wdd->dev);
-- return ret;
-- }
--
- if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
- wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
-
-@@ -265,9 +254,7 @@ static int __watchdog_register_device(st
- dev_err(wdd->dev, "Cannot register reboot notifier (%d)\n",
- ret);
- watchdog_dev_unregister(wdd);
-- device_destroy(watchdog_class, devno);
- ida_simple_remove(&watchdog_ida, wdd->id);
-- wdd->dev = NULL;
- return ret;
- }
- }
-@@ -311,9 +298,6 @@ EXPORT_SYMBOL_GPL(watchdog_register_devi
-
- static void __watchdog_unregister_device(struct watchdog_device *wdd)
- {
-- int ret;
-- int devno;
--
- if (wdd == NULL)
- return;
-
-@@ -323,13 +307,8 @@ static void __watchdog_unregister_device
- if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status))
- unregister_reboot_notifier(&wdd->reboot_nb);
-
-- devno = wdd->cdev.dev;
-- ret = watchdog_dev_unregister(wdd);
-- if (ret)
-- pr_err("error unregistering /dev/watchdog (err=%d)\n", ret);
-- device_destroy(watchdog_class, devno);
-+ watchdog_dev_unregister(wdd);
- ida_simple_remove(&watchdog_ida, wdd->id);
-- wdd->dev = NULL;
- }
-
- /**
-@@ -370,9 +349,11 @@ static int __init watchdog_deferred_regi
-
- static int __init watchdog_init(void)
- {
-- watchdog_class = watchdog_dev_init();
-- if (IS_ERR(watchdog_class))
-- return PTR_ERR(watchdog_class);
-+ int err;
-+
-+ err = watchdog_dev_init();
-+ if (err < 0)
-+ return err;
-
- watchdog_deferred_registration();
- return 0;
---- a/drivers/watchdog/watchdog_core.h
-+++ b/drivers/watchdog/watchdog_core.h
-@@ -32,6 +32,6 @@
- * Functions/procedures to be called by the core
- */
- extern int watchdog_dev_register(struct watchdog_device *);
--extern int watchdog_dev_unregister(struct watchdog_device *);
--extern struct class * __init watchdog_dev_init(void);
-+extern void watchdog_dev_unregister(struct watchdog_device *);
-+extern int __init watchdog_dev_init(void);
- extern void __exit watchdog_dev_exit(void);
---- a/drivers/watchdog/watchdog_dev.c
-+++ b/drivers/watchdog/watchdog_dev.c
-@@ -628,17 +628,18 @@ static struct miscdevice watchdog_miscde
- };
-
- /*
-- * watchdog_dev_register: register a watchdog device
-+ * watchdog_cdev_register: register watchdog character device
- * @wdd: watchdog device
-+ * @devno: character device number
- *
-- * Register a watchdog device including handling the legacy
-+ * Register a watchdog character device including handling the legacy
- * /dev/watchdog node. /dev/watchdog is actually a miscdevice and
- * thus we set it up like that.
- */
-
--int watchdog_dev_register(struct watchdog_device *wdd)
-+static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
- {
-- int err, devno;
-+ int err;
-
- if (wdd->id == 0) {
- old_wdd = wdd;
-@@ -656,7 +657,6 @@ int watchdog_dev_register(struct watchdo
- }
-
- /* Fill in the data structures */
-- devno = MKDEV(MAJOR(watchdog_devt), wdd->id);
- cdev_init(&wdd->cdev, &watchdog_fops);
- wdd->cdev.owner = wdd->ops->owner;
-
-@@ -674,13 +674,14 @@ int watchdog_dev_register(struct watchdo
- }
-
- /*
-- * watchdog_dev_unregister: unregister a watchdog device
-+ * watchdog_cdev_unregister: unregister watchdog character device
- * @watchdog: watchdog device
- *
-- * Unregister the watchdog and if needed the legacy /dev/watchdog device.
-+ * Unregister watchdog character device and if needed the legacy
-+ * /dev/watchdog device.
- */
-
--int watchdog_dev_unregister(struct watchdog_device *wdd)
-+static void watchdog_cdev_unregister(struct watchdog_device *wdd)
- {
- mutex_lock(&wdd->lock);
- set_bit(WDOG_UNREGISTERED, &wdd->status);
-@@ -691,7 +692,6 @@ int watchdog_dev_unregister(struct watch
- misc_deregister(&watchdog_miscdev);
- old_wdd = NULL;
- }
-- return 0;
- }
-
- static struct class watchdog_class = {
-@@ -701,29 +701,76 @@ static struct class watchdog_class = {
- };
-
- /*
-+ * watchdog_dev_register: register a watchdog device
-+ * @wdd: watchdog device
-+ *
-+ * Register a watchdog device including handling the legacy
-+ * /dev/watchdog node. /dev/watchdog is actually a miscdevice and
-+ * thus we set it up like that.
-+ */
-+
-+int watchdog_dev_register(struct watchdog_device *wdd)
-+{
-+ struct device *dev;
-+ dev_t devno;
-+ int ret;
-+
-+ devno = MKDEV(MAJOR(watchdog_devt), wdd->id);
-+
-+ ret = watchdog_cdev_register(wdd, devno);
-+ if (ret)
-+ return ret;
-+
-+ dev = device_create(&watchdog_class, wdd->parent, devno, wdd,
-+ "watchdog%d", wdd->id);
-+ if (IS_ERR(dev)) {
-+ watchdog_cdev_unregister(wdd);
-+ return PTR_ERR(dev);
-+ }
-+ wdd->dev = dev;
-+
-+ return ret;
-+}
-+
-+/*
-+ * watchdog_dev_unregister: unregister a watchdog device
-+ * @watchdog: watchdog device
-+ *
-+ * Unregister watchdog device and if needed the legacy
-+ * /dev/watchdog device.
-+ */
-+
-+void watchdog_dev_unregister(struct watchdog_device *wdd)
-+{
-+ watchdog_cdev_unregister(wdd);
-+ device_destroy(&watchdog_class, wdd->dev->devt);
-+ wdd->dev = NULL;
-+}
-+
-+/*
- * watchdog_dev_init: init dev part of watchdog core
- *
- * Allocate a range of chardev nodes to use for watchdog devices
- */
-
--struct class * __init watchdog_dev_init(void)
-+int __init watchdog_dev_init(void)
- {
- int err;
-
- err = class_register(&watchdog_class);
- if (err < 0) {
- pr_err("couldn't register class\n");
-- return ERR_PTR(err);
-+ return err;
- }
-
- err = alloc_chrdev_region(&watchdog_devt, 0, MAX_DOGS, "watchdog");
- if (err < 0) {
- pr_err("watchdog: unable to allocate char dev region\n");
- class_unregister(&watchdog_class);
-- return ERR_PTR(err);
-+ return err;
- }
-
-- return &watchdog_class;
-+ return 0;
- }
-
- /*
diff --git a/target/linux/ipq806x/patches-4.4/009-6-watchdog-Separate-and-maintain-variables-based-on-variable-lifetime.patch b/target/linux/ipq806x/patches-4.4/009-6-watchdog-Separate-and-maintain-variables-based-on-variable-lifetime.patch
deleted file mode 100644
index 214dabfb9a..0000000000
--- a/target/linux/ipq806x/patches-4.4/009-6-watchdog-Separate-and-maintain-variables-based-on-variable-lifetime.patch
+++ /dev/null
@@ -1,969 +0,0 @@
-From b4ffb1909843b28f3b1b60197d517b123b7a9b66 Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Fri, 25 Dec 2015 16:01:42 -0800
-Subject: watchdog: Separate and maintain variables based on variable lifetime
-
-All variables required by the watchdog core to manage a watchdog are
-currently stored in struct watchdog_device. The lifetime of those
-variables is determined by the watchdog driver. However, the lifetime
-of variables used by the watchdog core differs from the lifetime of
-struct watchdog_device. To remedy this situation, watchdog drivers
-can implement ref and unref callbacks, to be used by the watchdog
-core to lock struct watchdog_device in memory.
-
-While this solves the immediate problem, it depends on watchdog drivers
-to actually implement the ref/unref callbacks. This is error prone,
-often not implemented in the first place, or not implemented correctly.
-
-To solve the problem without requiring driver support, split the variables
-in struct watchdog_device into two data structures - one for variables
-associated with the watchdog driver, one for variables associated with
-the watchdog core. With this approach, the watchdog core can keep track
-of its variable lifetime and no longer depends on ref/unref callbacks
-in the driver. As a side effect, some of the variables originally in
-struct watchdog_driver are now private to the watchdog core and no longer
-visible in watchdog drivers.
-
-As a side effect of the changes made, an ioctl will now always fail
-with -ENODEV after a watchdog device was unregistered with the character
-device still open. Previously, it would only fail with -ENODEV in some
-situations. Also, ioctl operations are now atomic from driver perspective.
-With this change, it is now guaranteed that the driver will not unregister
-a watchdog between a timeout change and the subsequent ping.
-
-The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer
-used and marked as deprecated.
-
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- Documentation/watchdog/watchdog-kernel-api.txt | 45 +--
- drivers/watchdog/watchdog_core.c | 2 -
- drivers/watchdog/watchdog_dev.c | 383 +++++++++++++------------
- include/linux/watchdog.h | 22 +-
- 4 files changed, 218 insertions(+), 234 deletions(-)
-
---- a/Documentation/watchdog/watchdog-kernel-api.txt
-+++ b/Documentation/watchdog/watchdog-kernel-api.txt
-@@ -44,7 +44,6 @@ The watchdog device structure looks like
-
- struct watchdog_device {
- int id;
-- struct cdev cdev;
- struct device *dev;
- struct device *parent;
- const struct watchdog_info *info;
-@@ -56,7 +55,7 @@ struct watchdog_device {
- struct notifier_block reboot_nb;
- struct notifier_block restart_nb;
- void *driver_data;
-- struct mutex lock;
-+ struct watchdog_core_data *wd_data;
- unsigned long status;
- struct list_head deferred;
- };
-@@ -66,8 +65,6 @@ It contains following fields:
- /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old
- /dev/watchdog miscdev. The id is set automatically when calling
- watchdog_register_device.
--* cdev: cdev for the dynamic /dev/watchdog<id> device nodes. This
-- field is also populated by watchdog_register_device.
- * dev: device under the watchdog class (created by watchdog_register_device).
- * parent: set this to the parent device (or NULL) before calling
- watchdog_register_device.
-@@ -89,11 +86,10 @@ It contains following fields:
- * driver_data: a pointer to the drivers private data of a watchdog device.
- This data should only be accessed via the watchdog_set_drvdata and
- watchdog_get_drvdata routines.
--* lock: Mutex for WatchDog Timer Driver Core internal use only.
-+* wd_data: a pointer to watchdog core internal data.
- * status: this field contains a number of status bits that give extra
- information about the status of the device (Like: is the watchdog timer
-- running/active, is the nowayout bit set, is the device opened via
-- the /dev/watchdog interface or not, ...).
-+ running/active, or is the nowayout bit set).
- * deferred: entry in wtd_deferred_reg_list which is used to
- register early initialized watchdogs.
-
-@@ -110,8 +106,8 @@ struct watchdog_ops {
- int (*set_timeout)(struct watchdog_device *, unsigned int);
- unsigned int (*get_timeleft)(struct watchdog_device *);
- int (*restart)(struct watchdog_device *);
-- void (*ref)(struct watchdog_device *);
-- void (*unref)(struct watchdog_device *);
-+ void (*ref)(struct watchdog_device *) __deprecated;
-+ void (*unref)(struct watchdog_device *) __deprecated;
- long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
- };
-
-@@ -120,20 +116,6 @@ driver's operations. This module owner w
- the watchdog is active. (This to avoid a system crash when you unload the
- module and /dev/watchdog is still open).
-
--If the watchdog_device struct is dynamically allocated, just locking the module
--is not enough and a driver also needs to define the ref and unref operations to
--ensure the structure holding the watchdog_device does not go away.
--
--The simplest (and usually sufficient) implementation of this is to:
--1) Add a kref struct to the same structure which is holding the watchdog_device
--2) Define a release callback for the kref which frees the struct holding both
--3) Call kref_init on this kref *before* calling watchdog_register_device()
--4) Define a ref operation calling kref_get on this kref
--5) Define a unref operation calling kref_put on this kref
--6) When it is time to cleanup:
-- * Do not kfree() the struct holding both, the last kref_put will do this!
-- * *After* calling watchdog_unregister_device() call kref_put on the kref
--
- Some operations are mandatory and some are optional. The mandatory operations
- are:
- * start: this is a pointer to the routine that starts the watchdog timer
-@@ -176,34 +158,21 @@ they are supported. These optional routi
- * get_timeleft: this routines returns the time that's left before a reset.
- * restart: this routine restarts the machine. It returns 0 on success or a
- negative errno code for failure.
--* ref: the operation that calls kref_get on the kref of a dynamically
-- allocated watchdog_device struct.
--* unref: the operation that calls kref_put on the kref of a dynamically
-- allocated watchdog_device struct.
- * ioctl: if this routine is present then it will be called first before we do
- our own internal ioctl call handling. This routine should return -ENOIOCTLCMD
- if a command is not supported. The parameters that are passed to the ioctl
- call are: watchdog_device, cmd and arg.
-
-+The 'ref' and 'unref' operations are no longer used and deprecated.
-+
- The status bits should (preferably) be set with the set_bit and clear_bit alike
- bit-operations. The status bits that are defined are:
- * WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device
- is active or not. When the watchdog is active after booting, then you should
- set this status bit (Note: when you register the watchdog timer device with
- this bit set, then opening /dev/watchdog will skip the start operation)
--* WDOG_DEV_OPEN: this status bit shows whether or not the watchdog device
-- was opened via /dev/watchdog.
-- (This bit should only be used by the WatchDog Timer Driver Core).
--* WDOG_ALLOW_RELEASE: this bit stores whether or not the magic close character
-- has been sent (so that we can support the magic close feature).
-- (This bit should only be used by the WatchDog Timer Driver Core).
- * WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog.
- If this bit is set then the watchdog timer will not be able to stop.
--* WDOG_UNREGISTERED: this bit gets set by the WatchDog Timer Driver Core
-- after calling watchdog_unregister_device, and then checked before calling
-- any watchdog_ops, so that you can be sure that no operations (other then
-- unref) will get called after unregister, even if userspace still holds a
-- reference to /dev/watchdog
-
- To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog
- timer device) you can either:
---- a/drivers/watchdog/watchdog_core.c
-+++ b/drivers/watchdog/watchdog_core.c
-@@ -210,8 +210,6 @@ static int __watchdog_register_device(st
- * corrupted in a later stage then we expect a kernel panic!
- */
-
-- mutex_init(&wdd->lock);
--
- /* Use alias for watchdog id if possible */
- if (wdd->parent) {
- ret = of_alias_get_id(wdd->parent->of_node, "watchdog");
---- a/drivers/watchdog/watchdog_dev.c
-+++ b/drivers/watchdog/watchdog_dev.c
-@@ -32,27 +32,51 @@
-
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
--#include <linux/module.h> /* For module stuff/... */
--#include <linux/types.h> /* For standard types (like size_t) */
-+#include <linux/cdev.h> /* For character device */
- #include <linux/errno.h> /* For the -ENODEV/... values */
--#include <linux/kernel.h> /* For printk/panic/... */
- #include <linux/fs.h> /* For file operations */
--#include <linux/watchdog.h> /* For watchdog specific items */
--#include <linux/miscdevice.h> /* For handling misc devices */
- #include <linux/init.h> /* For __init/__exit/... */
-+#include <linux/kernel.h> /* For printk/panic/... */
-+#include <linux/kref.h> /* For data references */
-+#include <linux/miscdevice.h> /* For handling misc devices */
-+#include <linux/module.h> /* For module stuff/... */
-+#include <linux/mutex.h> /* For mutexes */
-+#include <linux/slab.h> /* For memory functions */
-+#include <linux/types.h> /* For standard types (like size_t) */
-+#include <linux/watchdog.h> /* For watchdog specific items */
- #include <linux/uaccess.h> /* For copy_to_user/put_user/... */
-
- #include "watchdog_core.h"
-
-+/*
-+ * struct watchdog_core_data - watchdog core internal data
-+ * @kref: Reference count.
-+ * @cdev: The watchdog's Character device.
-+ * @wdd: Pointer to watchdog device.
-+ * @lock: Lock for watchdog core.
-+ * @status: Watchdog core internal status bits.
-+ */
-+struct watchdog_core_data {
-+ struct kref kref;
-+ struct cdev cdev;
-+ struct watchdog_device *wdd;
-+ struct mutex lock;
-+ unsigned long status; /* Internal status bits */
-+#define _WDOG_DEV_OPEN 0 /* Opened ? */
-+#define _WDOG_ALLOW_RELEASE 1 /* Did we receive the magic char ? */
-+};
-+
- /* the dev_t structure to store the dynamically allocated watchdog devices */
- static dev_t watchdog_devt;
--/* the watchdog device behind /dev/watchdog */
--static struct watchdog_device *old_wdd;
-+/* Reference to watchdog device behind /dev/watchdog */
-+static struct watchdog_core_data *old_wd_data;
-
- /*
- * watchdog_ping: ping the watchdog.
- * @wdd: the watchdog device to ping
- *
-+ * The caller must hold wd_data->lock.
-+ *
- * If the watchdog has no own ping operation then it needs to be
- * restarted via the start operation. This wrapper function does
- * exactly that.
-@@ -61,25 +85,16 @@ static struct watchdog_device *old_wdd;
-
- static int watchdog_ping(struct watchdog_device *wdd)
- {
-- int err = 0;
--
-- mutex_lock(&wdd->lock);
--
-- if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
-- err = -ENODEV;
-- goto out_ping;
-- }
-+ int err;
-
- if (!watchdog_active(wdd))
-- goto out_ping;
-+ return 0;
-
- if (wdd->ops->ping)
- err = wdd->ops->ping(wdd); /* ping the watchdog */
- else
- err = wdd->ops->start(wdd); /* restart watchdog */
-
--out_ping:
-- mutex_unlock(&wdd->lock);
- return err;
- }
-
-@@ -87,6 +102,8 @@ out_ping:
- * watchdog_start: wrapper to start the watchdog.
- * @wdd: the watchdog device to start
- *
-+ * The caller must hold wd_data->lock.
-+ *
- * Start the watchdog if it is not active and mark it active.
- * This function returns zero on success or a negative errno code for
- * failure.
-@@ -94,24 +111,15 @@ out_ping:
-
- static int watchdog_start(struct watchdog_device *wdd)
- {
-- int err = 0;
--
-- mutex_lock(&wdd->lock);
--
-- if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
-- err = -ENODEV;
-- goto out_start;
-- }
-+ int err;
-
- if (watchdog_active(wdd))
-- goto out_start;
-+ return 0;
-
- err = wdd->ops->start(wdd);
- if (err == 0)
- set_bit(WDOG_ACTIVE, &wdd->status);
-
--out_start:
-- mutex_unlock(&wdd->lock);
- return err;
- }
-
-@@ -119,6 +127,8 @@ out_start:
- * watchdog_stop: wrapper to stop the watchdog.
- * @wdd: the watchdog device to stop
- *
-+ * The caller must hold wd_data->lock.
-+ *
- * Stop the watchdog if it is still active and unmark it active.
- * This function returns zero on success or a negative errno code for
- * failure.
-@@ -127,93 +137,58 @@ out_start:
-
- static int watchdog_stop(struct watchdog_device *wdd)
- {
-- int err = 0;
--
-- mutex_lock(&wdd->lock);
--
-- if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
-- err = -ENODEV;
-- goto out_stop;
-- }
-+ int err;
-
- if (!watchdog_active(wdd))
-- goto out_stop;
-+ return 0;
-
- if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
- dev_info(wdd->dev, "nowayout prevents watchdog being stopped!\n");
-- err = -EBUSY;
-- goto out_stop;
-+ return -EBUSY;
- }
-
- err = wdd->ops->stop(wdd);
- if (err == 0)
- clear_bit(WDOG_ACTIVE, &wdd->status);
-
--out_stop:
-- mutex_unlock(&wdd->lock);
- return err;
- }
-
- /*
- * watchdog_get_status: wrapper to get the watchdog status
- * @wdd: the watchdog device to get the status from
-- * @status: the status of the watchdog device
-+ *
-+ * The caller must hold wd_data->lock.
- *
- * Get the watchdog's status flags.
- */
-
--static int watchdog_get_status(struct watchdog_device *wdd,
-- unsigned int *status)
-+static unsigned int watchdog_get_status(struct watchdog_device *wdd)
- {
-- int err = 0;
--
-- *status = 0;
- if (!wdd->ops->status)
-- return -EOPNOTSUPP;
--
-- mutex_lock(&wdd->lock);
--
-- if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
-- err = -ENODEV;
-- goto out_status;
-- }
--
-- *status = wdd->ops->status(wdd);
-+ return 0;
-
--out_status:
-- mutex_unlock(&wdd->lock);
-- return err;
-+ return wdd->ops->status(wdd);
- }
-
- /*
- * watchdog_set_timeout: set the watchdog timer timeout
- * @wdd: the watchdog device to set the timeout for
- * @timeout: timeout to set in seconds
-+ *
-+ * The caller must hold wd_data->lock.
- */
-
- static int watchdog_set_timeout(struct watchdog_device *wdd,
- unsigned int timeout)
- {
-- int err;
--
- if (!wdd->ops->set_timeout || !(wdd->info->options & WDIOF_SETTIMEOUT))
- return -EOPNOTSUPP;
-
- if (watchdog_timeout_invalid(wdd, timeout))
- return -EINVAL;
-
-- mutex_lock(&wdd->lock);
--
-- if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
-- err = -ENODEV;
-- goto out_timeout;
-- }
--
-- err = wdd->ops->set_timeout(wdd, timeout);
--
--out_timeout:
-- mutex_unlock(&wdd->lock);
-- return err;
-+ return wdd->ops->set_timeout(wdd, timeout);
- }
-
- /*
-@@ -221,30 +196,22 @@ out_timeout:
- * @wdd: the watchdog device to get the remaining time from
- * @timeleft: the time that's left
- *
-+ * The caller must hold wd_data->lock.
-+ *
- * Get the time before a watchdog will reboot (if not pinged).
- */
-
- static int watchdog_get_timeleft(struct watchdog_device *wdd,
- unsigned int *timeleft)
- {
-- int err = 0;
--
- *timeleft = 0;
-+
- if (!wdd->ops->get_timeleft)
- return -EOPNOTSUPP;
-
-- mutex_lock(&wdd->lock);
--
-- if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
-- err = -ENODEV;
-- goto out_timeleft;
-- }
--
- *timeleft = wdd->ops->get_timeleft(wdd);
-
--out_timeleft:
-- mutex_unlock(&wdd->lock);
-- return err;
-+ return 0;
- }
-
- #ifdef CONFIG_WATCHDOG_SYSFS
-@@ -261,14 +228,14 @@ static ssize_t status_show(struct device
- char *buf)
- {
- struct watchdog_device *wdd = dev_get_drvdata(dev);
-- ssize_t status;
-- unsigned int val;
-+ struct watchdog_core_data *wd_data = wdd->wd_data;
-+ unsigned int status;
-
-- status = watchdog_get_status(wdd, &val);
-- if (!status)
-- status = sprintf(buf, "%u\n", val);
-+ mutex_lock(&wd_data->lock);
-+ status = watchdog_get_status(wdd);
-+ mutex_unlock(&wd_data->lock);
-
-- return status;
-+ return sprintf(buf, "%u\n", status);
- }
- static DEVICE_ATTR_RO(status);
-
-@@ -285,10 +252,13 @@ static ssize_t timeleft_show(struct devi
- char *buf)
- {
- struct watchdog_device *wdd = dev_get_drvdata(dev);
-+ struct watchdog_core_data *wd_data = wdd->wd_data;
- ssize_t status;
- unsigned int val;
-
-+ mutex_lock(&wd_data->lock);
- status = watchdog_get_timeleft(wdd, &val);
-+ mutex_unlock(&wd_data->lock);
- if (!status)
- status = sprintf(buf, "%u\n", val);
-
-@@ -365,28 +335,17 @@ __ATTRIBUTE_GROUPS(wdt);
- * @wdd: the watchdog device to do the ioctl on
- * @cmd: watchdog command
- * @arg: argument pointer
-+ *
-+ * The caller must hold wd_data->lock.
- */
-
- static int watchdog_ioctl_op(struct watchdog_device *wdd, unsigned int cmd,
- unsigned long arg)
- {
-- int err;
--
- if (!wdd->ops->ioctl)
- return -ENOIOCTLCMD;
-
-- mutex_lock(&wdd->lock);
--
-- if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
-- err = -ENODEV;
-- goto out_ioctl;
-- }
--
-- err = wdd->ops->ioctl(wdd, cmd, arg);
--
--out_ioctl:
-- mutex_unlock(&wdd->lock);
-- return err;
-+ return wdd->ops->ioctl(wdd, cmd, arg);
- }
-
- /*
-@@ -404,10 +363,11 @@ out_ioctl:
- static ssize_t watchdog_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
- {
-- struct watchdog_device *wdd = file->private_data;
-+ struct watchdog_core_data *wd_data = file->private_data;
-+ struct watchdog_device *wdd;
-+ int err;
- size_t i;
- char c;
-- int err;
-
- if (len == 0)
- return 0;
-@@ -416,18 +376,25 @@ static ssize_t watchdog_write(struct fil
- * Note: just in case someone wrote the magic character
- * five months ago...
- */
-- clear_bit(WDOG_ALLOW_RELEASE, &wdd->status);
-+ clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status);
-
- /* scan to see whether or not we got the magic character */
- for (i = 0; i != len; i++) {
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
-- set_bit(WDOG_ALLOW_RELEASE, &wdd->status);
-+ set_bit(_WDOG_ALLOW_RELEASE, &wd_data->status);
- }
-
- /* someone wrote to us, so we send the watchdog a keepalive ping */
-- err = watchdog_ping(wdd);
-+
-+ err = -ENODEV;
-+ mutex_lock(&wd_data->lock);
-+ wdd = wd_data->wdd;
-+ if (wdd)
-+ err = watchdog_ping(wdd);
-+ mutex_unlock(&wd_data->lock);
-+
- if (err < 0)
- return err;
-
-@@ -447,71 +414,94 @@ static ssize_t watchdog_write(struct fil
- static long watchdog_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
- {
-- struct watchdog_device *wdd = file->private_data;
-+ struct watchdog_core_data *wd_data = file->private_data;
- void __user *argp = (void __user *)arg;
-+ struct watchdog_device *wdd;
- int __user *p = argp;
- unsigned int val;
- int err;
-
-+ mutex_lock(&wd_data->lock);
-+
-+ wdd = wd_data->wdd;
-+ if (!wdd) {
-+ err = -ENODEV;
-+ goto out_ioctl;
-+ }
-+
- err = watchdog_ioctl_op(wdd, cmd, arg);
- if (err != -ENOIOCTLCMD)
-- return err;
-+ goto out_ioctl;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
-- return copy_to_user(argp, wdd->info,
-+ err = copy_to_user(argp, wdd->info,
- sizeof(struct watchdog_info)) ? -EFAULT : 0;
-+ break;
- case WDIOC_GETSTATUS:
-- err = watchdog_get_status(wdd, &val);
-- if (err == -ENODEV)
-- return err;
-- return put_user(val, p);
-+ val = watchdog_get_status(wdd);
-+ err = put_user(val, p);
-+ break;
- case WDIOC_GETBOOTSTATUS:
-- return put_user(wdd->bootstatus, p);
-+ err = put_user(wdd->bootstatus, p);
-+ break;
- case WDIOC_SETOPTIONS:
-- if (get_user(val, p))
-- return -EFAULT;
-+ if (get_user(val, p)) {
-+ err = -EFAULT;
-+ break;
-+ }
- if (val & WDIOS_DISABLECARD) {
- err = watchdog_stop(wdd);
- if (err < 0)
-- return err;
-+ break;
- }
-- if (val & WDIOS_ENABLECARD) {
-+ if (val & WDIOS_ENABLECARD)
- err = watchdog_start(wdd);
-- if (err < 0)
-- return err;
-- }
-- return 0;
-+ break;
- case WDIOC_KEEPALIVE:
-- if (!(wdd->info->options & WDIOF_KEEPALIVEPING))
-- return -EOPNOTSUPP;
-- return watchdog_ping(wdd);
-+ if (!(wdd->info->options & WDIOF_KEEPALIVEPING)) {
-+ err = -EOPNOTSUPP;
-+ break;
-+ }
-+ err = watchdog_ping(wdd);
-+ break;
- case WDIOC_SETTIMEOUT:
-- if (get_user(val, p))
-- return -EFAULT;
-+ if (get_user(val, p)) {
-+ err = -EFAULT;
-+ break;
-+ }
- err = watchdog_set_timeout(wdd, val);
- if (err < 0)
-- return err;
-+ break;
- /* If the watchdog is active then we send a keepalive ping
- * to make sure that the watchdog keep's running (and if
- * possible that it takes the new timeout) */
- err = watchdog_ping(wdd);
- if (err < 0)
-- return err;
-+ break;
- /* Fall */
- case WDIOC_GETTIMEOUT:
- /* timeout == 0 means that we don't know the timeout */
-- if (wdd->timeout == 0)
-- return -EOPNOTSUPP;
-- return put_user(wdd->timeout, p);
-+ if (wdd->timeout == 0) {
-+ err = -EOPNOTSUPP;
-+ break;
-+ }
-+ err = put_user(wdd->timeout, p);
-+ break;
- case WDIOC_GETTIMELEFT:
- err = watchdog_get_timeleft(wdd, &val);
-- if (err)
-- return err;
-- return put_user(val, p);
-+ if (err < 0)
-+ break;
-+ err = put_user(val, p);
-+ break;
- default:
-- return -ENOTTY;
-+ err = -ENOTTY;
-+ break;
- }
-+
-+out_ioctl:
-+ mutex_unlock(&wd_data->lock);
-+ return err;
- }
-
- /*
-@@ -526,45 +516,59 @@ static long watchdog_ioctl(struct file *
-
- static int watchdog_open(struct inode *inode, struct file *file)
- {
-- int err = -EBUSY;
-+ struct watchdog_core_data *wd_data;
- struct watchdog_device *wdd;
-+ int err;
-
- /* Get the corresponding watchdog device */
- if (imajor(inode) == MISC_MAJOR)
-- wdd = old_wdd;
-+ wd_data = old_wd_data;
- else
-- wdd = container_of(inode->i_cdev, struct watchdog_device, cdev);
-+ wd_data = container_of(inode->i_cdev, struct watchdog_core_data,
-+ cdev);
-
- /* the watchdog is single open! */
-- if (test_and_set_bit(WDOG_DEV_OPEN, &wdd->status))
-+ if (test_and_set_bit(_WDOG_DEV_OPEN, &wd_data->status))
- return -EBUSY;
-
-+ wdd = wd_data->wdd;
-+
- /*
- * If the /dev/watchdog device is open, we don't want the module
- * to be unloaded.
- */
-- if (!try_module_get(wdd->ops->owner))
-- goto out;
-+ if (!try_module_get(wdd->ops->owner)) {
-+ err = -EBUSY;
-+ goto out_clear;
-+ }
-
- err = watchdog_start(wdd);
- if (err < 0)
- goto out_mod;
-
-- file->private_data = wdd;
-+ file->private_data = wd_data;
-
-- if (wdd->ops->ref)
-- wdd->ops->ref(wdd);
-+ kref_get(&wd_data->kref);
-
- /* dev/watchdog is a virtual (and thus non-seekable) filesystem */
- return nonseekable_open(inode, file);
-
- out_mod:
-- module_put(wdd->ops->owner);
--out:
-- clear_bit(WDOG_DEV_OPEN, &wdd->status);
-+ module_put(wd_data->wdd->ops->owner);
-+out_clear:
-+ clear_bit(_WDOG_DEV_OPEN, &wd_data->status);
- return err;
- }
-
-+static void watchdog_core_data_release(struct kref *kref)
-+{
-+ struct watchdog_core_data *wd_data;
-+
-+ wd_data = container_of(kref, struct watchdog_core_data, kref);
-+
-+ kfree(wd_data);
-+}
-+
- /*
- * watchdog_release: release the watchdog device.
- * @inode: inode of device
-@@ -577,9 +581,16 @@ out:
-
- static int watchdog_release(struct inode *inode, struct file *file)
- {
-- struct watchdog_device *wdd = file->private_data;
-+ struct watchdog_core_data *wd_data = file->private_data;
-+ struct watchdog_device *wdd;
- int err = -EBUSY;
-
-+ mutex_lock(&wd_data->lock);
-+
-+ wdd = wd_data->wdd;
-+ if (!wdd)
-+ goto done;
-+
- /*
- * We only stop the watchdog if we received the magic character
- * or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
-@@ -587,29 +598,24 @@ static int watchdog_release(struct inode
- */
- if (!test_bit(WDOG_ACTIVE, &wdd->status))
- err = 0;
-- else if (test_and_clear_bit(WDOG_ALLOW_RELEASE, &wdd->status) ||
-+ else if (test_and_clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status) ||
- !(wdd->info->options & WDIOF_MAGICCLOSE))
- err = watchdog_stop(wdd);
-
- /* If the watchdog was not stopped, send a keepalive ping */
- if (err < 0) {
-- mutex_lock(&wdd->lock);
-- if (!test_bit(WDOG_UNREGISTERED, &wdd->status))
-- dev_crit(wdd->dev, "watchdog did not stop!\n");
-- mutex_unlock(&wdd->lock);
-+ dev_crit(wdd->dev, "watchdog did not stop!\n");
- watchdog_ping(wdd);
- }
-
-- /* Allow the owner module to be unloaded again */
-- module_put(wdd->ops->owner);
--
- /* make sure that /dev/watchdog can be re-opened */
-- clear_bit(WDOG_DEV_OPEN, &wdd->status);
--
-- /* Note wdd may be gone after this, do not use after this! */
-- if (wdd->ops->unref)
-- wdd->ops->unref(wdd);
-+ clear_bit(_WDOG_DEV_OPEN, &wd_data->status);
-
-+done:
-+ mutex_unlock(&wd_data->lock);
-+ /* Allow the owner module to be unloaded again */
-+ module_put(wd_data->cdev.owner);
-+ kref_put(&wd_data->kref, watchdog_core_data_release);
- return 0;
- }
-
-@@ -639,10 +645,20 @@ static struct miscdevice watchdog_miscde
-
- static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
- {
-+ struct watchdog_core_data *wd_data;
- int err;
-
-+ wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL);
-+ if (!wd_data)
-+ return -ENOMEM;
-+ kref_init(&wd_data->kref);
-+ mutex_init(&wd_data->lock);
-+
-+ wd_data->wdd = wdd;
-+ wdd->wd_data = wd_data;
-+
- if (wdd->id == 0) {
-- old_wdd = wdd;
-+ old_wd_data = wd_data;
- watchdog_miscdev.parent = wdd->parent;
- err = misc_register(&watchdog_miscdev);
- if (err != 0) {
-@@ -651,23 +667,25 @@ static int watchdog_cdev_register(struct
- if (err == -EBUSY)
- pr_err("%s: a legacy watchdog module is probably present.\n",
- wdd->info->identity);
-- old_wdd = NULL;
-+ old_wd_data = NULL;
-+ kfree(wd_data);
- return err;
- }
- }
-
- /* Fill in the data structures */
-- cdev_init(&wdd->cdev, &watchdog_fops);
-- wdd->cdev.owner = wdd->ops->owner;
-+ cdev_init(&wd_data->cdev, &watchdog_fops);
-+ wd_data->cdev.owner = wdd->ops->owner;
-
- /* Add the device */
-- err = cdev_add(&wdd->cdev, devno, 1);
-+ err = cdev_add(&wd_data->cdev, devno, 1);
- if (err) {
- pr_err("watchdog%d unable to add device %d:%d\n",
- wdd->id, MAJOR(watchdog_devt), wdd->id);
- if (wdd->id == 0) {
- misc_deregister(&watchdog_miscdev);
-- old_wdd = NULL;
-+ old_wd_data = NULL;
-+ kref_put(&wd_data->kref, watchdog_core_data_release);
- }
- }
- return err;
-@@ -683,15 +701,20 @@ static int watchdog_cdev_register(struct
-
- static void watchdog_cdev_unregister(struct watchdog_device *wdd)
- {
-- mutex_lock(&wdd->lock);
-- set_bit(WDOG_UNREGISTERED, &wdd->status);
-- mutex_unlock(&wdd->lock);
-+ struct watchdog_core_data *wd_data = wdd->wd_data;
-
-- cdev_del(&wdd->cdev);
-+ cdev_del(&wd_data->cdev);
- if (wdd->id == 0) {
- misc_deregister(&watchdog_miscdev);
-- old_wdd = NULL;
-+ old_wd_data = NULL;
- }
-+
-+ mutex_lock(&wd_data->lock);
-+ wd_data->wdd = NULL;
-+ wdd->wd_data = NULL;
-+ mutex_unlock(&wd_data->lock);
-+
-+ kref_put(&wd_data->kref, watchdog_core_data_release);
- }
-
- static struct class watchdog_class = {
-@@ -742,9 +765,9 @@ int watchdog_dev_register(struct watchdo
-
- void watchdog_dev_unregister(struct watchdog_device *wdd)
- {
-- watchdog_cdev_unregister(wdd);
- device_destroy(&watchdog_class, wdd->dev->devt);
- wdd->dev = NULL;
-+ watchdog_cdev_unregister(wdd);
- }
-
- /*
---- a/include/linux/watchdog.h
-+++ b/include/linux/watchdog.h
-@@ -17,6 +17,7 @@
-
- struct watchdog_ops;
- struct watchdog_device;
-+struct watchdog_core_data;
-
- /** struct watchdog_ops - The watchdog-devices operations
- *
-@@ -28,8 +29,6 @@ struct watchdog_device;
- * @set_timeout:The routine for setting the watchdog devices timeout value (in seconds).
- * @get_timeleft:The routine that gets the time left before a reset (in seconds).
- * @restart: The routine for restarting the machine.
-- * @ref: The ref operation for dyn. allocated watchdog_device structs
-- * @unref: The unref operation for dyn. allocated watchdog_device structs
- * @ioctl: The routines that handles extra ioctl calls.
- *
- * The watchdog_ops structure contains a list of low-level operations
-@@ -48,15 +47,14 @@ struct watchdog_ops {
- int (*set_timeout)(struct watchdog_device *, unsigned int);
- unsigned int (*get_timeleft)(struct watchdog_device *);
- int (*restart)(struct watchdog_device *);
-- void (*ref)(struct watchdog_device *);
-- void (*unref)(struct watchdog_device *);
-+ void (*ref)(struct watchdog_device *) __deprecated;
-+ void (*unref)(struct watchdog_device *) __deprecated;
- long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
- };
-
- /** struct watchdog_device - The structure that defines a watchdog device
- *
- * @id: The watchdog's ID. (Allocated by watchdog_register_device)
-- * @cdev: The watchdog's Character device.
- * @dev: The device for our watchdog
- * @parent: The parent bus device
- * @info: Pointer to a watchdog_info structure.
-@@ -67,8 +65,8 @@ struct watchdog_ops {
- * @max_timeout:The watchdog devices maximum timeout value (in seconds).
- * @reboot_nb: The notifier block to stop watchdog on reboot.
- * @restart_nb: The notifier block to register a restart function.
-- * @driver-data:Pointer to the drivers private data.
-- * @lock: Lock for watchdog core internal use only.
-+ * @driver_data:Pointer to the drivers private data.
-+ * @wd_data: Pointer to watchdog core internal data.
- * @status: Field that contains the devices internal status bits.
- * @deferred: entry in wtd_deferred_reg_list which is used to
- * register early initialized watchdogs.
-@@ -84,7 +82,6 @@ struct watchdog_ops {
- */
- struct watchdog_device {
- int id;
-- struct cdev cdev;
- struct device *dev;
- struct device *parent;
- const struct watchdog_info *info;
-@@ -96,15 +93,12 @@ struct watchdog_device {
- struct notifier_block reboot_nb;
- struct notifier_block restart_nb;
- void *driver_data;
-- struct mutex lock;
-+ struct watchdog_core_data *wd_data;
- unsigned long status;
- /* Bit numbers for status flags */
- #define WDOG_ACTIVE 0 /* Is the watchdog running/active */
--#define WDOG_DEV_OPEN 1 /* Opened via /dev/watchdog ? */
--#define WDOG_ALLOW_RELEASE 2 /* Did we receive the magic char ? */
--#define WDOG_NO_WAY_OUT 3 /* Is 'nowayout' feature set ? */
--#define WDOG_UNREGISTERED 4 /* Has the device been unregistered */
--#define WDOG_STOP_ON_REBOOT 5 /* Should be stopped on reboot */
-+#define WDOG_NO_WAY_OUT 1 /* Is 'nowayout' feature set ? */
-+#define WDOG_STOP_ON_REBOOT 2 /* Should be stopped on reboot */
- struct list_head deferred;
- };
-
diff --git a/target/linux/ipq806x/patches-4.4/009-7-watchdog-Drop-pointer-to-watchdog-device-from-struct-watchdog_device.patch b/target/linux/ipq806x/patches-4.4/009-7-watchdog-Drop-pointer-to-watchdog-device-from-struct-watchdog_device.patch
deleted file mode 100644
index 9640cd4757..0000000000
--- a/target/linux/ipq806x/patches-4.4/009-7-watchdog-Drop-pointer-to-watchdog-device-from-struct-watchdog_device.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 0254e953537c92df3e7d0176f401a211e944fd61 Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Sun, 3 Jan 2016 15:11:58 -0800
-Subject: watchdog: Drop pointer to watchdog device from struct watchdog_device
-
-The lifetime of the watchdog device pointer is different from the lifetime
-of its character device. Remove it entirely to avoid race conditions.
-
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- Documentation/watchdog/watchdog-kernel-api.txt | 2 --
- drivers/watchdog/watchdog_core.c | 8 ++++----
- drivers/watchdog/watchdog_dev.c | 9 ++++-----
- include/linux/watchdog.h | 2 --
- 4 files changed, 8 insertions(+), 13 deletions(-)
-
---- a/Documentation/watchdog/watchdog-kernel-api.txt
-+++ b/Documentation/watchdog/watchdog-kernel-api.txt
-@@ -44,7 +44,6 @@ The watchdog device structure looks like
-
- struct watchdog_device {
- int id;
-- struct device *dev;
- struct device *parent;
- const struct watchdog_info *info;
- const struct watchdog_ops *ops;
-@@ -65,7 +64,6 @@ It contains following fields:
- /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old
- /dev/watchdog miscdev. The id is set automatically when calling
- watchdog_register_device.
--* dev: device under the watchdog class (created by watchdog_register_device).
- * parent: set this to the parent device (or NULL) before calling
- watchdog_register_device.
- * info: a pointer to a watchdog_info structure. This structure gives some
---- a/drivers/watchdog/watchdog_core.c
-+++ b/drivers/watchdog/watchdog_core.c
-@@ -249,8 +249,8 @@ static int __watchdog_register_device(st
-
- ret = register_reboot_notifier(&wdd->reboot_nb);
- if (ret) {
-- dev_err(wdd->dev, "Cannot register reboot notifier (%d)\n",
-- ret);
-+ pr_err("watchdog%d: Cannot register reboot notifier (%d)\n",
-+ wdd->id, ret);
- watchdog_dev_unregister(wdd);
- ida_simple_remove(&watchdog_ida, wdd->id);
- return ret;
-@@ -262,8 +262,8 @@ static int __watchdog_register_device(st
-
- ret = register_restart_handler(&wdd->restart_nb);
- if (ret)
-- dev_warn(wdd->dev, "Cannot register restart handler (%d)\n",
-- ret);
-+ pr_warn("watchog%d: Cannot register restart handler (%d)\n",
-+ wdd->id, ret);
- }
-
- return 0;
---- a/drivers/watchdog/watchdog_dev.c
-+++ b/drivers/watchdog/watchdog_dev.c
-@@ -143,7 +143,8 @@ static int watchdog_stop(struct watchdog
- return 0;
-
- if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
-- dev_info(wdd->dev, "nowayout prevents watchdog being stopped!\n");
-+ pr_info("watchdog%d: nowayout prevents watchdog being stopped!\n",
-+ wdd->id);
- return -EBUSY;
- }
-
-@@ -604,7 +605,7 @@ static int watchdog_release(struct inode
-
- /* If the watchdog was not stopped, send a keepalive ping */
- if (err < 0) {
-- dev_crit(wdd->dev, "watchdog did not stop!\n");
-+ pr_crit("watchdog%d: watchdog did not stop!\n", wdd->id);
- watchdog_ping(wdd);
- }
-
-@@ -750,7 +751,6 @@ int watchdog_dev_register(struct watchdo
- watchdog_cdev_unregister(wdd);
- return PTR_ERR(dev);
- }
-- wdd->dev = dev;
-
- return ret;
- }
-@@ -765,8 +765,7 @@ int watchdog_dev_register(struct watchdo
-
- void watchdog_dev_unregister(struct watchdog_device *wdd)
- {
-- device_destroy(&watchdog_class, wdd->dev->devt);
-- wdd->dev = NULL;
-+ device_destroy(&watchdog_class, wdd->wd_data->cdev.dev);
- watchdog_cdev_unregister(wdd);
- }
-
---- a/include/linux/watchdog.h
-+++ b/include/linux/watchdog.h
-@@ -55,7 +55,6 @@ struct watchdog_ops {
- /** struct watchdog_device - The structure that defines a watchdog device
- *
- * @id: The watchdog's ID. (Allocated by watchdog_register_device)
-- * @dev: The device for our watchdog
- * @parent: The parent bus device
- * @info: Pointer to a watchdog_info structure.
- * @ops: Pointer to the list of watchdog operations.
-@@ -82,7 +81,6 @@ struct watchdog_ops {
- */
- struct watchdog_device {
- int id;
-- struct device *dev;
- struct device *parent;
- const struct watchdog_info *info;
- const struct watchdog_ops *ops;
diff --git a/target/linux/ipq806x/patches-4.4/009-8-watchdog-kill-unref-ref-ops.patch b/target/linux/ipq806x/patches-4.4/009-8-watchdog-kill-unref-ref-ops.patch
deleted file mode 100644
index ba56a86538..0000000000
--- a/target/linux/ipq806x/patches-4.4/009-8-watchdog-kill-unref-ref-ops.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 62cd1c40ce1c7c16835b599751c7a002eb5bbdf5 Mon Sep 17 00:00:00 2001
-From: Tomas Winkler <tomas.winkler@intel.com>
-Date: Sun, 3 Jan 2016 13:32:37 +0200
-Subject: watchdog: kill unref/ref ops
-
-ref/unref ops are not called at all so even marked them as deprecated
-is misleading, we need to just drop the API.
-
-Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- include/linux/watchdog.h | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/include/linux/watchdog.h
-+++ b/include/linux/watchdog.h
-@@ -47,8 +47,6 @@ struct watchdog_ops {
- int (*set_timeout)(struct watchdog_device *, unsigned int);
- unsigned int (*get_timeleft)(struct watchdog_device *);
- int (*restart)(struct watchdog_device *);
-- void (*ref)(struct watchdog_device *) __deprecated;
-- void (*unref)(struct watchdog_device *) __deprecated;
- long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
- };
-
diff --git a/target/linux/ipq806x/patches-4.4/010-1-qcom-wdt-use-core-restart-handler.patch b/target/linux/ipq806x/patches-4.4/010-1-qcom-wdt-use-core-restart-handler.patch
deleted file mode 100644
index d36dedcd1c..0000000000
--- a/target/linux/ipq806x/patches-4.4/010-1-qcom-wdt-use-core-restart-handler.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 80969a68ffed12f82e2a29908306ff43a6861a61 Mon Sep 17 00:00:00 2001
-From: Damien Riegel <damien.riegel@savoirfairelinux.com>
-Date: Mon, 16 Nov 2015 12:28:09 -0500
-Subject: watchdog: qcom-wdt: use core restart handler
-
-Get rid of the custom restart handler by using the one provided by the
-watchdog core.
-
-Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/qcom-wdt.c | 49 ++++++++++++++++++---------------------------
- 1 file changed, 19 insertions(+), 30 deletions(-)
-
---- a/drivers/watchdog/qcom-wdt.c
-+++ b/drivers/watchdog/qcom-wdt.c
-@@ -17,7 +17,6 @@
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
--#include <linux/reboot.h>
- #include <linux/watchdog.h>
-
- #define WDT_RST 0x38
-@@ -28,7 +27,6 @@ struct qcom_wdt {
- struct watchdog_device wdd;
- struct clk *clk;
- unsigned long rate;
-- struct notifier_block restart_nb;
- void __iomem *base;
- };
-
-@@ -72,25 +70,9 @@ static int qcom_wdt_set_timeout(struct w
- return qcom_wdt_start(wdd);
- }
-
--static const struct watchdog_ops qcom_wdt_ops = {
-- .start = qcom_wdt_start,
-- .stop = qcom_wdt_stop,
-- .ping = qcom_wdt_ping,
-- .set_timeout = qcom_wdt_set_timeout,
-- .owner = THIS_MODULE,
--};
--
--static const struct watchdog_info qcom_wdt_info = {
-- .options = WDIOF_KEEPALIVEPING
-- | WDIOF_MAGICCLOSE
-- | WDIOF_SETTIMEOUT,
-- .identity = KBUILD_MODNAME,
--};
--
--static int qcom_wdt_restart(struct notifier_block *nb, unsigned long action,
-- void *data)
-+static int qcom_wdt_restart(struct watchdog_device *wdd)
- {
-- struct qcom_wdt *wdt = container_of(nb, struct qcom_wdt, restart_nb);
-+ struct qcom_wdt *wdt = to_qcom_wdt(wdd);
- u32 timeout;
-
- /*
-@@ -110,9 +92,25 @@ static int qcom_wdt_restart(struct notif
- wmb();
-
- msleep(150);
-- return NOTIFY_DONE;
-+ return 0;
- }
-
-+static const struct watchdog_ops qcom_wdt_ops = {
-+ .start = qcom_wdt_start,
-+ .stop = qcom_wdt_stop,
-+ .ping = qcom_wdt_ping,
-+ .set_timeout = qcom_wdt_set_timeout,
-+ .restart = qcom_wdt_restart,
-+ .owner = THIS_MODULE,
-+};
-+
-+static const struct watchdog_info qcom_wdt_info = {
-+ .options = WDIOF_KEEPALIVEPING
-+ | WDIOF_MAGICCLOSE
-+ | WDIOF_SETTIMEOUT,
-+ .identity = KBUILD_MODNAME,
-+};
-+
- static int qcom_wdt_probe(struct platform_device *pdev)
- {
- struct qcom_wdt *wdt;
-@@ -187,14 +185,6 @@ static int qcom_wdt_probe(struct platfor
- goto err_clk_unprepare;
- }
-
-- /*
-- * WDT restart notifier has priority 0 (use as a last resort)
-- */
-- wdt->restart_nb.notifier_call = qcom_wdt_restart;
-- ret = register_restart_handler(&wdt->restart_nb);
-- if (ret)
-- dev_err(&pdev->dev, "failed to setup restart handler\n");
--
- platform_set_drvdata(pdev, wdt);
- return 0;
-
-@@ -207,7 +197,6 @@ static int qcom_wdt_remove(struct platfo
- {
- struct qcom_wdt *wdt = platform_get_drvdata(pdev);
-
-- unregister_restart_handler(&wdt->restart_nb);
- watchdog_unregister_device(&wdt->wdd);
- clk_disable_unprepare(wdt->clk);
- return 0;
diff --git a/target/linux/ipq806x/patches-4.4/010-2-qcom-wdt-Do-not-set-dev-in-struct-watchdog_device.patch b/target/linux/ipq806x/patches-4.4/010-2-qcom-wdt-Do-not-set-dev-in-struct-watchdog_device.patch
deleted file mode 100644
index 31371c2c81..0000000000
--- a/target/linux/ipq806x/patches-4.4/010-2-qcom-wdt-Do-not-set-dev-in-struct-watchdog_device.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 0933b453f1c7104d873aacf8524f8ac380a7ed08 Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Thu, 24 Dec 2015 14:22:04 -0800
-Subject: watchdog: qcom-wdt: Do not set 'dev' in struct watchdog_device
-
-The 'dev' pointer in struct watchdog_device is set by the watchdog core
-when registering the watchdog device and not by the driver. It points to
-the watchdog device, not its parent.
-
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/qcom-wdt.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/watchdog/qcom-wdt.c
-+++ b/drivers/watchdog/qcom-wdt.c
-@@ -164,7 +164,6 @@ static int qcom_wdt_probe(struct platfor
- goto err_clk_unprepare;
- }
-
-- wdt->wdd.dev = &pdev->dev;
- wdt->wdd.info = &qcom_wdt_info;
- wdt->wdd.ops = &qcom_wdt_ops;
- wdt->wdd.min_timeout = 1;
diff --git a/target/linux/ipq806x/patches-4.4/010-3-watchdog-Add-action-and-data-parameters-to-restart-handler-callback.patch b/target/linux/ipq806x/patches-4.4/010-3-watchdog-Add-action-and-data-parameters-to-restart-handler-callback.patch
deleted file mode 100644
index 7ceff32caa..0000000000
--- a/target/linux/ipq806x/patches-4.4/010-3-watchdog-Add-action-and-data-parameters-to-restart-handler-callback.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-rom 4d8b229d5ea610affe672e919021e9d02cd877da Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Fri, 26 Feb 2016 17:32:49 -0800
-Subject: watchdog: Add 'action' and 'data' parameters to restart handler
- callback
-
-The 'action' (or restart mode) and data parameters may be used by restart
-handlers, so they should be passed to the restart callback functions.
-
-Cc: Sylvain Lemieux <slemieux@tycoint.com>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/qcom-wdt.c | 3 ++-
- drivers/watchdog/watchdog_core.c | 2 +-
- include/linux/watchdog.h | 2 +-
-
---- a/drivers/watchdog/qcom-wdt.c
-+++ b/drivers/watchdog/qcom-wdt.c
-@@ -70,7 +70,8 @@ static int qcom_wdt_set_timeout(struct w
- return qcom_wdt_start(wdd);
- }
-
--static int qcom_wdt_restart(struct watchdog_device *wdd)
-+static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
-+ void *data)
- {
- struct qcom_wdt *wdt = to_qcom_wdt(wdd);
- u32 timeout;
---- a/drivers/watchdog/watchdog_core.c
-+++ b/drivers/watchdog/watchdog_core.c
-@@ -164,7 +164,7 @@ static int watchdog_restart_notifier(str
-
- int ret;
-
-- ret = wdd->ops->restart(wdd);
-+ ret = wdd->ops->restart(wdd, action, data);
- if (ret)
- return NOTIFY_BAD;
-
---- a/include/linux/watchdog.h
-+++ b/include/linux/watchdog.h
-@@ -46,7 +46,7 @@ struct watchdog_ops {
- unsigned int (*status)(struct watchdog_device *);
- int (*set_timeout)(struct watchdog_device *, unsigned int);
- unsigned int (*get_timeleft)(struct watchdog_device *);
-- int (*restart)(struct watchdog_device *);
-+ int (*restart)(struct watchdog_device *, unsigned long, void *);
- long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
- };
-
diff --git a/target/linux/ipq806x/patches-4.4/010-4-watchdog-qcom-Report-reboot-reason.patch b/target/linux/ipq806x/patches-4.4/010-4-watchdog-qcom-Report-reboot-reason.patch
deleted file mode 100644
index f7fcaeeda2..0000000000
--- a/target/linux/ipq806x/patches-4.4/010-4-watchdog-qcom-Report-reboot-reason.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From b6ef36d2c1e391adc1fe1b2dd2a0f887a9f3052b Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <groeck@chromium.org>
-Date: Mon, 4 Apr 2016 17:37:46 -0700
-Subject: watchdog: qcom: Report reboot reason
-
-The Qualcom watchdog timer block reports if the system was reset by the
-watchdog. Pass the information to user space.
-
-Reviewed-by: Grant Grundler <grundler@chromium.org>
-Tested-by: Grant Grundler <grundler@chromium.org>
-Signed-off-by: Guenter Roeck <groeck@chromium.org>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/qcom-wdt.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/watchdog/qcom-wdt.c
-+++ b/drivers/watchdog/qcom-wdt.c
-@@ -21,6 +21,7 @@
-
- #define WDT_RST 0x38
- #define WDT_EN 0x40
-+#define WDT_STS 0x44
- #define WDT_BITE_TIME 0x5C
-
- struct qcom_wdt {
-@@ -108,7 +109,8 @@ static const struct watchdog_ops qcom_wd
- static const struct watchdog_info qcom_wdt_info = {
- .options = WDIOF_KEEPALIVEPING
- | WDIOF_MAGICCLOSE
-- | WDIOF_SETTIMEOUT,
-+ | WDIOF_SETTIMEOUT
-+ | WDIOF_CARDRESET,
- .identity = KBUILD_MODNAME,
- };
-
-@@ -171,6 +173,9 @@ static int qcom_wdt_probe(struct platfor
- wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
- wdt->wdd.parent = &pdev->dev;
-
-+ if (readl(wdt->base + WDT_STS) & 1)
-+ wdt->wdd.bootstatus = WDIOF_CARDRESET;
-+
- /*
- * If 'timeout-sec' unspecified in devicetree, assume a 30 second
- * default, unless the max timeout is less than 30 seconds, then use
diff --git a/target/linux/ipq806x/patches-4.4/010-5-watchdog-qcom-add-option-for-standalone-watchdog-not-in-timer-block.patch b/target/linux/ipq806x/patches-4.4/010-5-watchdog-qcom-add-option-for-standalone-watchdog-not-in-timer-block.patch
deleted file mode 100644
index 82dd875434..0000000000
--- a/target/linux/ipq806x/patches-4.4/010-5-watchdog-qcom-add-option-for-standalone-watchdog-not-in-timer-block.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From f0d9d0f4b44ae5503ea368e7f066b20f12ca1d37 Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Wed, 29 Jun 2016 10:50:01 -0700
-Subject: watchdog: qcom: add option for standalone watchdog not in timer block
-
-Commit 0dfd582e026a ("watchdog: qcom: use timer devicetree
-binding") moved to use the watchdog as a subset timer
-register block. Some devices have the watchdog completely
-standalone with slightly different register offsets as
-well so let's account for the differences here.
-
-The existing "kpss-standalone" compatible string doesn't
-make it entirely clear exactly what the device is so
-rename to "kpss-wdt" to reflect watchdog timer
-functionality. Also update ipq4019 DTS with an SoC
-specific compatible.
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
-Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- .../devicetree/bindings/watchdog/qcom-wdt.txt | 2 +
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
- drivers/watchdog/qcom-wdt.c | 64 ++++++++++++++++------
- 3 files changed, 51 insertions(+), 17 deletions(-)
-
---- a/drivers/watchdog/qcom-wdt.c
-+++ b/drivers/watchdog/qcom-wdt.c
-@@ -18,19 +18,42 @@
- #include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/watchdog.h>
-+#include <linux/of_device.h>
-
--#define WDT_RST 0x38
--#define WDT_EN 0x40
--#define WDT_STS 0x44
--#define WDT_BITE_TIME 0x5C
-+enum wdt_reg {
-+ WDT_RST,
-+ WDT_EN,
-+ WDT_STS,
-+ WDT_BITE_TIME,
-+};
-+
-+static const u32 reg_offset_data_apcs_tmr[] = {
-+ [WDT_RST] = 0x38,
-+ [WDT_EN] = 0x40,
-+ [WDT_STS] = 0x44,
-+ [WDT_BITE_TIME] = 0x5C,
-+};
-+
-+static const u32 reg_offset_data_kpss[] = {
-+ [WDT_RST] = 0x4,
-+ [WDT_EN] = 0x8,
-+ [WDT_STS] = 0xC,
-+ [WDT_BITE_TIME] = 0x14,
-+};
-
- struct qcom_wdt {
- struct watchdog_device wdd;
- struct clk *clk;
- unsigned long rate;
- void __iomem *base;
-+ const u32 *layout;
- };
-
-+static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
-+{
-+ return wdt->base + wdt->layout[reg];
-+}
-+
- static inline
- struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
- {
-@@ -41,10 +64,10 @@ static int qcom_wdt_start(struct watchdo
- {
- struct qcom_wdt *wdt = to_qcom_wdt(wdd);
-
-- writel(0, wdt->base + WDT_EN);
-- writel(1, wdt->base + WDT_RST);
-- writel(wdd->timeout * wdt->rate, wdt->base + WDT_BITE_TIME);
-- writel(1, wdt->base + WDT_EN);
-+ writel(0, wdt_addr(wdt, WDT_EN));
-+ writel(1, wdt_addr(wdt, WDT_RST));
-+ writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
-+ writel(1, wdt_addr(wdt, WDT_EN));
- return 0;
- }
-
-@@ -52,7 +75,7 @@ static int qcom_wdt_stop(struct watchdog
- {
- struct qcom_wdt *wdt = to_qcom_wdt(wdd);
-
-- writel(0, wdt->base + WDT_EN);
-+ writel(0, wdt_addr(wdt, WDT_EN));
- return 0;
- }
-
-@@ -60,7 +83,7 @@ static int qcom_wdt_ping(struct watchdog
- {
- struct qcom_wdt *wdt = to_qcom_wdt(wdd);
-
-- writel(1, wdt->base + WDT_RST);
-+ writel(1, wdt_addr(wdt, WDT_RST));
- return 0;
- }
-
-@@ -83,10 +106,10 @@ static int qcom_wdt_restart(struct watch
- */
- timeout = 128 * wdt->rate / 1000;
-
-- writel(0, wdt->base + WDT_EN);
-- writel(1, wdt->base + WDT_RST);
-- writel(timeout, wdt->base + WDT_BITE_TIME);
-- writel(1, wdt->base + WDT_EN);
-+ writel(0, wdt_addr(wdt, WDT_EN));
-+ writel(1, wdt_addr(wdt, WDT_RST));
-+ writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
-+ writel(1, wdt_addr(wdt, WDT_EN));
-
- /*
- * Actually make sure the above sequence hits hardware before sleeping.
-@@ -119,9 +142,16 @@ static int qcom_wdt_probe(struct platfor
- struct qcom_wdt *wdt;
- struct resource *res;
- struct device_node *np = pdev->dev.of_node;
-+ const u32 *regs;
- u32 percpu_offset;
- int ret;
-
-+ regs = of_device_get_match_data(&pdev->dev);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "Unsupported QCOM WDT module\n");
-+ return -ENODEV;
-+ }
-+
- wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
- if (!wdt)
- return -ENOMEM;
-@@ -172,6 +202,7 @@ static int qcom_wdt_probe(struct platfor
- wdt->wdd.min_timeout = 1;
- wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
- wdt->wdd.parent = &pdev->dev;
-+ wdt->layout = regs;
-
- if (readl(wdt->base + WDT_STS) & 1)
- wdt->wdd.bootstatus = WDIOF_CARDRESET;
-@@ -208,8 +239,9 @@ static int qcom_wdt_remove(struct platfo
- }
-
- static const struct of_device_id qcom_wdt_of_table[] = {
-- { .compatible = "qcom,kpss-timer" },
-- { .compatible = "qcom,scss-timer" },
-+ { .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
-+ { .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
-+ { .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
- { },
- };
- MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
diff --git a/target/linux/ipq806x/patches-4.4/010-6-watchdog-qcom-configure-BARK-time-in-addition-to-BITE-time.patch b/target/linux/ipq806x/patches-4.4/010-6-watchdog-qcom-configure-BARK-time-in-addition-to-BITE-time.patch
deleted file mode 100644
index bdc3f99897..0000000000
--- a/target/linux/ipq806x/patches-4.4/010-6-watchdog-qcom-configure-BARK-time-in-addition-to-BITE-time.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 10073a205df269abcbd9c3fbc690a813827107ef Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Tue, 28 Jun 2016 11:35:21 -0700
-Subject: watchdog: qcom: configure BARK time in addition to BITE time
-
-For certain parts and some versions of TZ, TZ will reset the chip
-when a BARK is triggered even though it was not configured here. So
-by default let's configure this BARK time as well.
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/qcom-wdt.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/watchdog/qcom-wdt.c
-+++ b/drivers/watchdog/qcom-wdt.c
-@@ -24,6 +24,7 @@ enum wdt_reg {
- WDT_RST,
- WDT_EN,
- WDT_STS,
-+ WDT_BARK_TIME,
- WDT_BITE_TIME,
- };
-
-@@ -31,6 +32,7 @@ static const u32 reg_offset_data_apcs_tm
- [WDT_RST] = 0x38,
- [WDT_EN] = 0x40,
- [WDT_STS] = 0x44,
-+ [WDT_BARK_TIME] = 0x4C,
- [WDT_BITE_TIME] = 0x5C,
- };
-
-@@ -38,6 +40,7 @@ static const u32 reg_offset_data_kpss[]
- [WDT_RST] = 0x4,
- [WDT_EN] = 0x8,
- [WDT_STS] = 0xC,
-+ [WDT_BARK_TIME] = 0x10,
- [WDT_BITE_TIME] = 0x14,
- };
-
-@@ -66,6 +69,7 @@ static int qcom_wdt_start(struct watchdo
-
- writel(0, wdt_addr(wdt, WDT_EN));
- writel(1, wdt_addr(wdt, WDT_RST));
-+ writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME));
- writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
- writel(1, wdt_addr(wdt, WDT_EN));
- return 0;
-@@ -108,6 +112,7 @@ static int qcom_wdt_restart(struct watch
-
- writel(0, wdt_addr(wdt, WDT_EN));
- writel(1, wdt_addr(wdt, WDT_RST));
-+ writel(timeout, wdt_addr(wdt, WDT_BARK_TIME));
- writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
- writel(1, wdt_addr(wdt, WDT_EN));
-
diff --git a/target/linux/ipq806x/patches-4.4/011-1-fix-bld-errs-hwmon-sch56xx-Drop-watchdog-driver-data-reference-count-callbacks.patch b/target/linux/ipq806x/patches-4.4/011-1-fix-bld-errs-hwmon-sch56xx-Drop-watchdog-driver-data-reference-count-callbacks.patch
deleted file mode 100644
index c78202b325..0000000000
--- a/target/linux/ipq806x/patches-4.4/011-1-fix-bld-errs-hwmon-sch56xx-Drop-watchdog-driver-data-reference-count-callbacks.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 3b8d058cfe6a3b14abee324f4c4b33e64bf61aeb Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Fri, 25 Dec 2015 16:01:45 -0800
-Subject: hwmon: (sch56xx) Drop watchdog driver data reference count callbacks
-
-Reference counting is now implemented in the watchdog core and no longer
-required in watchdog drivers.
-
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/hwmon/sch56xx-common.c | 31 +------------------------------
- 1 file changed, 1 insertion(+), 30 deletions(-)
-
---- a/drivers/hwmon/sch56xx-common.c
-+++ b/drivers/hwmon/sch56xx-common.c
-@@ -30,7 +30,6 @@
- #include <linux/watchdog.h>
- #include <linux/miscdevice.h>
- #include <linux/uaccess.h>
--#include <linux/kref.h>
- #include <linux/slab.h>
- #include "sch56xx-common.h"
-
-@@ -67,7 +66,6 @@ MODULE_PARM_DESC(nowayout, "Watchdog can
- struct sch56xx_watchdog_data {
- u16 addr;
- struct mutex *io_lock;
-- struct kref kref;
- struct watchdog_info wdinfo;
- struct watchdog_device wddev;
- u8 watchdog_preset;
-@@ -258,15 +256,6 @@ EXPORT_SYMBOL(sch56xx_read_virtual_reg12
- * Watchdog routines
- */
-
--/* Release our data struct when we're unregistered *and*
-- all references to our watchdog device are released */
--static void watchdog_release_resources(struct kref *r)
--{
-- struct sch56xx_watchdog_data *data =
-- container_of(r, struct sch56xx_watchdog_data, kref);
-- kfree(data);
--}
--
- static int watchdog_set_timeout(struct watchdog_device *wddev,
- unsigned int timeout)
- {
-@@ -395,28 +384,12 @@ static int watchdog_stop(struct watchdog
- return 0;
- }
-
--static void watchdog_ref(struct watchdog_device *wddev)
--{
-- struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
--
-- kref_get(&data->kref);
--}
--
--static void watchdog_unref(struct watchdog_device *wddev)
--{
-- struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
--
-- kref_put(&data->kref, watchdog_release_resources);
--}
--
- static const struct watchdog_ops watchdog_ops = {
- .owner = THIS_MODULE,
- .start = watchdog_start,
- .stop = watchdog_stop,
- .ping = watchdog_trigger,
- .set_timeout = watchdog_set_timeout,
-- .ref = watchdog_ref,
-- .unref = watchdog_unref,
- };
-
- struct sch56xx_watchdog_data *sch56xx_watchdog_register(struct device *parent,
-@@ -448,7 +421,6 @@ struct sch56xx_watchdog_data *sch56xx_wa
-
- data->addr = addr;
- data->io_lock = io_lock;
-- kref_init(&data->kref);
-
- strlcpy(data->wdinfo.identity, "sch56xx watchdog",
- sizeof(data->wdinfo.identity));
-@@ -494,8 +466,7 @@ EXPORT_SYMBOL(sch56xx_watchdog_register)
- void sch56xx_watchdog_unregister(struct sch56xx_watchdog_data *data)
- {
- watchdog_unregister_device(&data->wddev);
-- kref_put(&data->kref, watchdog_release_resources);
-- /* Don't touch data after this it may have been free-ed! */
-+ kfree(data);
- }
- EXPORT_SYMBOL(sch56xx_watchdog_unregister);
-
diff --git a/target/linux/ipq806x/patches-4.4/011-2-fix-bld-errs-watchdog-da9052_wdt-Drop-reference-counting.patch b/target/linux/ipq806x/patches-4.4/011-2-fix-bld-errs-watchdog-da9052_wdt-Drop-reference-counting.patch
deleted file mode 100644
index 501bd13636..0000000000
--- a/target/linux/ipq806x/patches-4.4/011-2-fix-bld-errs-watchdog-da9052_wdt-Drop-reference-counting.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 756d1e9247dff6d416b0c9e073247f5e808bb5fa Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Fri, 25 Dec 2015 16:01:43 -0800
-Subject: watchdog: da9052_wdt: Drop reference counting
-
-Reference counting is now implemented in the watchdog core and no longer
-required in watchdog drivers.
-
-Since it was implememented a no-op, and since the local memory is allocated
-with devm_kzalloc(), the reference counting code in the driver really did
-not really work anyway, and this patch effectively fixes a bug which could
-cause a crash on unloading if the watchdog device was still open.
-
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/da9052_wdt.c | 24 ------------------------
- 1 file changed, 24 deletions(-)
-
---- a/drivers/watchdog/da9052_wdt.c
-+++ b/drivers/watchdog/da9052_wdt.c
-@@ -31,7 +31,6 @@
- struct da9052_wdt_data {
- struct watchdog_device wdt;
- struct da9052 *da9052;
-- struct kref kref;
- unsigned long jpast;
- };
-
-@@ -51,10 +50,6 @@ static const struct {
- };
-
-
--static void da9052_wdt_release_resources(struct kref *r)
--{
--}
--
- static int da9052_wdt_set_timeout(struct watchdog_device *wdt_dev,
- unsigned int timeout)
- {
-@@ -104,20 +99,6 @@ static int da9052_wdt_set_timeout(struct
- return 0;
- }
-
--static void da9052_wdt_ref(struct watchdog_device *wdt_dev)
--{
-- struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
--
-- kref_get(&driver_data->kref);
--}
--
--static void da9052_wdt_unref(struct watchdog_device *wdt_dev)
--{
-- struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
--
-- kref_put(&driver_data->kref, da9052_wdt_release_resources);
--}
--
- static int da9052_wdt_start(struct watchdog_device *wdt_dev)
- {
- return da9052_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
-@@ -170,8 +151,6 @@ static const struct watchdog_ops da9052_
- .stop = da9052_wdt_stop,
- .ping = da9052_wdt_ping,
- .set_timeout = da9052_wdt_set_timeout,
-- .ref = da9052_wdt_ref,
-- .unref = da9052_wdt_unref,
- };
-
-
-@@ -198,8 +177,6 @@ static int da9052_wdt_probe(struct platf
- da9052_wdt->parent = &pdev->dev;
- watchdog_set_drvdata(da9052_wdt, driver_data);
-
-- kref_init(&driver_data->kref);
--
- ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
- DA9052_CONTROLD_TWDSCALE, 0);
- if (ret < 0) {
-@@ -225,7 +202,6 @@ static int da9052_wdt_remove(struct plat
- struct da9052_wdt_data *driver_data = platform_get_drvdata(pdev);
-
- watchdog_unregister_device(&driver_data->wdt);
-- kref_put(&driver_data->kref, da9052_wdt_release_resources);
-
- return 0;
- }
diff --git a/target/linux/ipq806x/patches-4.4/011-3-fix-bld-errs-watchdog-da9055_wdt-Drop-reference-counting.patch b/target/linux/ipq806x/patches-4.4/011-3-fix-bld-errs-watchdog-da9055_wdt-Drop-reference-counting.patch
deleted file mode 100644
index 3cf723a9bc..0000000000
--- a/target/linux/ipq806x/patches-4.4/011-3-fix-bld-errs-watchdog-da9055_wdt-Drop-reference-counting.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 43f676ace2e0591718ff493d290bc49b35ec2ffc Mon Sep 17 00:00:00 2001
-From: Guenter Roeck <linux@roeck-us.net>
-Date: Fri, 25 Dec 2015 16:01:44 -0800
-Subject: watchdog: da9055_wdt: Drop reference counting
-
-Reference counting is now implemented in the watchdog core and no longer
-required in watchdog drivers.
-
-Since it was implememented a no-op, and since the local memory is allocated
-with devm_kzalloc(), the reference counting code in the driver really did
-not really work anyway, and this patch effectively fixes a bug which could
-cause a crash on unloading if the watchdog device was still open.
-
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/da9055_wdt.c | 24 ------------------------
- 1 file changed, 24 deletions(-)
-
---- a/drivers/watchdog/da9055_wdt.c
-+++ b/drivers/watchdog/da9055_wdt.c
-@@ -35,7 +35,6 @@ MODULE_PARM_DESC(nowayout,
- struct da9055_wdt_data {
- struct watchdog_device wdt;
- struct da9055 *da9055;
-- struct kref kref;
- };
-
- static const struct {
-@@ -99,24 +98,6 @@ static int da9055_wdt_ping(struct watchd
- DA9055_WATCHDOG_MASK, 1);
- }
-
--static void da9055_wdt_release_resources(struct kref *r)
--{
--}
--
--static void da9055_wdt_ref(struct watchdog_device *wdt_dev)
--{
-- struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
--
-- kref_get(&driver_data->kref);
--}
--
--static void da9055_wdt_unref(struct watchdog_device *wdt_dev)
--{
-- struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
--
-- kref_put(&driver_data->kref, da9055_wdt_release_resources);
--}
--
- static int da9055_wdt_start(struct watchdog_device *wdt_dev)
- {
- return da9055_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
-@@ -138,8 +119,6 @@ static const struct watchdog_ops da9055_
- .stop = da9055_wdt_stop,
- .ping = da9055_wdt_ping,
- .set_timeout = da9055_wdt_set_timeout,
-- .ref = da9055_wdt_ref,
-- .unref = da9055_wdt_unref,
- };
-
- static int da9055_wdt_probe(struct platform_device *pdev)
-@@ -165,8 +144,6 @@ static int da9055_wdt_probe(struct platf
- watchdog_set_nowayout(da9055_wdt, nowayout);
- watchdog_set_drvdata(da9055_wdt, driver_data);
-
-- kref_init(&driver_data->kref);
--
- ret = da9055_wdt_stop(da9055_wdt);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to stop watchdog, %d\n", ret);
-@@ -189,7 +166,6 @@ static int da9055_wdt_remove(struct plat
- struct da9055_wdt_data *driver_data = platform_get_drvdata(pdev);
-
- watchdog_unregister_device(&driver_data->wdt);
-- kref_put(&driver_data->kref, da9055_wdt_release_resources);
-
- return 0;
- }
diff --git a/target/linux/ipq806x/patches-4.4/012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.4/012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch
deleted file mode 100644
index 83b97bf5cf..0000000000
--- a/target/linux/ipq806x/patches-4.4/012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch
+++ /dev/null
@@ -1,746 +0,0 @@
-From patchwork Wed Nov 2 15:56:56 2016
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v9,1/3] clk: qcom: Add support for SMD-RPM Clocks
-From: Georgi Djakov <georgi.djakov@linaro.org>
-X-Patchwork-Id: 9409419
-Message-Id: <20161102155658.32203-2-georgi.djakov@linaro.org>
-To: sboyd@codeaurora.org, mturquette@baylibre.com
-Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
- robh+dt@kernel.org, mark.rutland@arm.com,
- linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- georgi.djakov@linaro.org
-Date: Wed, 2 Nov 2016 17:56:56 +0200
-
-This adds initial support for clocks controlled by the Resource
-Power Manager (RPM) processor on some Qualcomm SoCs, which use
-the qcom_smd_rpm driver to communicate with RPM.
-Such platforms are msm8916, apq8084 and msm8974.
-
-The RPM is a dedicated hardware engine for managing the shared
-SoC resources in order to keep the lowest power profile. It
-communicates with other hardware subsystems via shared memory
-and accepts clock requests, aggregates the requests and turns
-the clocks on/off or scales them on demand.
-
-This driver is based on the codeaurora.org driver:
-https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- .../devicetree/bindings/clock/qcom,rpmcc.txt | 36 ++
- drivers/clk/qcom/Kconfig | 16 +
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-smd-rpm.c | 571 +++++++++++++++++++++
- include/dt-bindings/clock/qcom,rpmcc.h | 45 ++
- 5 files changed, 669 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
- create mode 100644 drivers/clk/qcom/clk-smd-rpm.c
- create mode 100644 include/dt-bindings/clock/qcom,rpmcc.h
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-@@ -0,0 +1,36 @@
-+Qualcomm RPM Clock Controller Binding
-+------------------------------------------------
-+The RPM is a dedicated hardware engine for managing the shared
-+SoC resources in order to keep the lowest power profile. It
-+communicates with other hardware subsystems via shared memory
-+and accepts clock requests, aggregates the requests and turns
-+the clocks on/off or scales them on demand.
-+
-+Required properties :
-+- compatible : shall contain only one of the following. The generic
-+ compatible "qcom,rpmcc" should be also included.
-+
-+ "qcom,rpmcc-msm8916", "qcom,rpmcc"
-+
-+- #clock-cells : shall contain 1
-+
-+Example:
-+ smd {
-+ compatible = "qcom,smd";
-+
-+ rpm {
-+ interrupts = <0 168 1>;
-+ qcom,ipc = <&apcs 8 0>;
-+ qcom,smd-edge = <15>;
-+
-+ rpm_requests {
-+ compatible = "qcom,rpm-msm8916";
-+ qcom,smd-channels = "rpm_requests";
-+
-+ rpmcc: clock-controller {
-+ compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
-+ #clock-cells = <1>;
-+ };
-+ };
-+ };
-+ };
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -2,6 +2,9 @@ config QCOM_GDSC
- bool
- select PM_GENERIC_DOMAINS if PM
-
-+config QCOM_RPMCC
-+ bool
-+
- config COMMON_CLK_QCOM
- tristate "Support for Qualcomm's clock controllers"
- depends on OF
-@@ -9,6 +12,19 @@ config COMMON_CLK_QCOM
- select REGMAP_MMIO
- select RESET_CONTROLLER
-
-+config QCOM_CLK_SMD_RPM
-+ tristate "RPM over SMD based Clock Controller"
-+ depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
-+ select QCOM_RPMCC
-+ help
-+ The RPM (Resource Power Manager) is a dedicated hardware engine for
-+ managing the shared SoC resources in order to keep the lowest power
-+ profile. It communicates with other hardware subsystems via shared
-+ memory and accepts clock requests, aggregates the requests and turns
-+ the clocks on/off or scales them on demand.
-+ Say Y if you want to support the clocks exposed by the RPM on
-+ platforms such as apq8016, apq8084, msm8974 etc.
-+
- config APQ_GCC_8084
- tristate "APQ8084 Global Clock Controller"
- select QCOM_GDSC
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -22,3 +22,4 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896
- obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
- obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
- obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
-+obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
---- /dev/null
-+++ b/drivers/clk/qcom/clk-smd-rpm.c
-@@ -0,0 +1,571 @@
-+/*
-+ * Copyright (c) 2016, Linaro Limited
-+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/err.h>
-+#include <linux/export.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/soc/qcom/smd-rpm.h>
-+
-+#include <dt-bindings/clock/qcom,rpmcc.h>
-+#include <dt-bindings/mfd/qcom-rpm.h>
-+
-+#define QCOM_RPM_KEY_SOFTWARE_ENABLE 0x6e657773
-+#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY 0x62636370
-+#define QCOM_RPM_SMD_KEY_RATE 0x007a484b
-+#define QCOM_RPM_SMD_KEY_ENABLE 0x62616e45
-+#define QCOM_RPM_SMD_KEY_STATE 0x54415453
-+#define QCOM_RPM_SCALING_ENABLE_ID 0x2
-+
-+#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id, \
-+ key) \
-+ static struct clk_smd_rpm _platform##_##_active; \
-+ static struct clk_smd_rpm _platform##_##_name = { \
-+ .rpm_res_type = (type), \
-+ .rpm_clk_id = (r_id), \
-+ .rpm_status_id = (stat_id), \
-+ .rpm_key = (key), \
-+ .peer = &_platform##_##_active, \
-+ .rate = INT_MAX, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_smd_rpm_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "xo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_smd_rpm _platform##_##_active = { \
-+ .rpm_res_type = (type), \
-+ .rpm_clk_id = (r_id), \
-+ .rpm_status_id = (stat_id), \
-+ .active_only = true, \
-+ .rpm_key = (key), \
-+ .peer = &_platform##_##_name, \
-+ .rate = INT_MAX, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_smd_rpm_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "xo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, \
-+ stat_id, r, key) \
-+ static struct clk_smd_rpm _platform##_##_active; \
-+ static struct clk_smd_rpm _platform##_##_name = { \
-+ .rpm_res_type = (type), \
-+ .rpm_clk_id = (r_id), \
-+ .rpm_status_id = (stat_id), \
-+ .rpm_key = (key), \
-+ .branch = true, \
-+ .peer = &_platform##_##_active, \
-+ .rate = (r), \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_smd_rpm_branch_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "xo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_smd_rpm _platform##_##_active = { \
-+ .rpm_res_type = (type), \
-+ .rpm_clk_id = (r_id), \
-+ .rpm_status_id = (stat_id), \
-+ .active_only = true, \
-+ .rpm_key = (key), \
-+ .branch = true, \
-+ .peer = &_platform##_##_name, \
-+ .rate = (r), \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_smd_rpm_branch_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "xo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id) \
-+ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
-+ 0, QCOM_RPM_SMD_KEY_RATE)
-+
-+#define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r) \
-+ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, \
-+ r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
-+
-+#define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id) \
-+ __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, \
-+ 0, QCOM_RPM_SMD_KEY_STATE)
-+
-+#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id) \
-+ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
-+ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
-+ QCOM_RPM_KEY_SOFTWARE_ENABLE)
-+
-+#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \
-+ __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, \
-+ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
-+ QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
-+
-+#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
-+
-+struct clk_smd_rpm {
-+ const int rpm_res_type;
-+ const int rpm_key;
-+ const int rpm_clk_id;
-+ const int rpm_status_id;
-+ const bool active_only;
-+ bool enabled;
-+ bool branch;
-+ struct clk_smd_rpm *peer;
-+ struct clk_hw hw;
-+ unsigned long rate;
-+ struct qcom_smd_rpm *rpm;
-+};
-+
-+struct clk_smd_rpm_req {
-+ __le32 key;
-+ __le32 nbytes;
-+ __le32 value;
-+};
-+
-+struct rpm_cc {
-+ struct qcom_rpm *rpm;
-+ struct clk_hw_onecell_data data;
-+ struct clk_hw *hws[];
-+};
-+
-+struct rpm_smd_clk_desc {
-+ struct clk_smd_rpm **clks;
-+ size_t num_clks;
-+};
-+
-+static DEFINE_MUTEX(rpm_smd_clk_lock);
-+
-+static int clk_smd_rpm_handoff(struct clk_smd_rpm *r)
-+{
-+ int ret;
-+ struct clk_smd_rpm_req req = {
-+ .key = cpu_to_le32(r->rpm_key),
-+ .nbytes = cpu_to_le32(sizeof(u32)),
-+ .value = cpu_to_le32(INT_MAX),
-+ };
-+
-+ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
-+ r->rpm_res_type, r->rpm_clk_id, &req,
-+ sizeof(req));
-+ if (ret)
-+ return ret;
-+ ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
-+ r->rpm_res_type, r->rpm_clk_id, &req,
-+ sizeof(req));
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
-+ unsigned long rate)
-+{
-+ struct clk_smd_rpm_req req = {
-+ .key = cpu_to_le32(r->rpm_key),
-+ .nbytes = cpu_to_le32(sizeof(u32)),
-+ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
-+ };
-+
-+ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
-+ r->rpm_res_type, r->rpm_clk_id, &req,
-+ sizeof(req));
-+}
-+
-+static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
-+ unsigned long rate)
-+{
-+ struct clk_smd_rpm_req req = {
-+ .key = cpu_to_le32(r->rpm_key),
-+ .nbytes = cpu_to_le32(sizeof(u32)),
-+ .value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
-+ };
-+
-+ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
-+ r->rpm_res_type, r->rpm_clk_id, &req,
-+ sizeof(req));
-+}
-+
-+static void to_active_sleep(struct clk_smd_rpm *r, unsigned long rate,
-+ unsigned long *active, unsigned long *sleep)
-+{
-+ *active = rate;
-+
-+ /*
-+ * Active-only clocks don't care what the rate is during sleep. So,
-+ * they vote for zero.
-+ */
-+ if (r->active_only)
-+ *sleep = 0;
-+ else
-+ *sleep = *active;
-+}
-+
-+static int clk_smd_rpm_prepare(struct clk_hw *hw)
-+{
-+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
-+ struct clk_smd_rpm *peer = r->peer;
-+ unsigned long this_rate = 0, this_sleep_rate = 0;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ unsigned long active_rate, sleep_rate;
-+ int ret = 0;
-+
-+ mutex_lock(&rpm_smd_clk_lock);
-+
-+ /* Don't send requests to the RPM if the rate has not been set. */
-+ if (!r->rate)
-+ goto out;
-+
-+ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate,
-+ &peer_rate, &peer_sleep_rate);
-+
-+ active_rate = max(this_rate, peer_rate);
-+
-+ if (r->branch)
-+ active_rate = !!active_rate;
-+
-+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
-+ if (r->branch)
-+ sleep_rate = !!sleep_rate;
-+
-+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ /* Undo the active set vote and restore it */
-+ ret = clk_smd_rpm_set_rate_active(r, peer_rate);
-+
-+out:
-+ if (!ret)
-+ r->enabled = true;
-+
-+ mutex_unlock(&rpm_smd_clk_lock);
-+
-+ return ret;
-+}
-+
-+static void clk_smd_rpm_unprepare(struct clk_hw *hw)
-+{
-+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
-+ struct clk_smd_rpm *peer = r->peer;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ unsigned long active_rate, sleep_rate;
-+ int ret;
-+
-+ mutex_lock(&rpm_smd_clk_lock);
-+
-+ if (!r->rate)
-+ goto out;
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate, &peer_rate,
-+ &peer_sleep_rate);
-+
-+ active_rate = r->branch ? !!peer_rate : peer_rate;
-+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
-+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ goto out;
-+
-+ r->enabled = false;
-+
-+out:
-+ mutex_unlock(&rpm_smd_clk_lock);
-+}
-+
-+static int clk_smd_rpm_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
-+ struct clk_smd_rpm *peer = r->peer;
-+ unsigned long active_rate, sleep_rate;
-+ unsigned long this_rate = 0, this_sleep_rate = 0;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ int ret = 0;
-+
-+ mutex_lock(&rpm_smd_clk_lock);
-+
-+ if (!r->enabled)
-+ goto out;
-+
-+ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate,
-+ &peer_rate, &peer_sleep_rate);
-+
-+ active_rate = max(this_rate, peer_rate);
-+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
-+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ goto out;
-+
-+ r->rate = rate;
-+
-+out:
-+ mutex_unlock(&rpm_smd_clk_lock);
-+
-+ return ret;
-+}
-+
-+static long clk_smd_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ /*
-+ * RPM handles rate rounding and we don't have a way to
-+ * know what the rate will be, so just return whatever
-+ * rate is requested.
-+ */
-+ return rate;
-+}
-+
-+static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
-+
-+ /*
-+ * RPM handles rate rounding and we don't have a way to
-+ * know what the rate will be, so just return whatever
-+ * rate was set.
-+ */
-+ return r->rate;
-+}
-+
-+static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
-+{
-+ int ret;
-+ struct clk_smd_rpm_req req = {
-+ .key = cpu_to_le32(QCOM_RPM_SMD_KEY_ENABLE),
-+ .nbytes = cpu_to_le32(sizeof(u32)),
-+ .value = cpu_to_le32(1),
-+ };
-+
-+ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_SLEEP_STATE,
-+ QCOM_SMD_RPM_MISC_CLK,
-+ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
-+ if (ret) {
-+ pr_err("RPM clock scaling (sleep set) not enabled!\n");
-+ return ret;
-+ }
-+
-+ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE,
-+ QCOM_SMD_RPM_MISC_CLK,
-+ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
-+ if (ret) {
-+ pr_err("RPM clock scaling (active set) not enabled!\n");
-+ return ret;
-+ }
-+
-+ pr_debug("%s: RPM clock scaling is enabled\n", __func__);
-+ return 0;
-+}
-+
-+static const struct clk_ops clk_smd_rpm_ops = {
-+ .prepare = clk_smd_rpm_prepare,
-+ .unprepare = clk_smd_rpm_unprepare,
-+ .set_rate = clk_smd_rpm_set_rate,
-+ .round_rate = clk_smd_rpm_round_rate,
-+ .recalc_rate = clk_smd_rpm_recalc_rate,
-+};
-+
-+static const struct clk_ops clk_smd_rpm_branch_ops = {
-+ .prepare = clk_smd_rpm_prepare,
-+ .unprepare = clk_smd_rpm_unprepare,
-+ .round_rate = clk_smd_rpm_round_rate,
-+ .recalc_rate = clk_smd_rpm_recalc_rate,
-+};
-+
-+/* msm8916 */
-+DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
-+DEFINE_CLK_SMD_RPM(msm8916, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
-+DEFINE_CLK_SMD_RPM(msm8916, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
-+DEFINE_CLK_SMD_RPM_QDSS(msm8916, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk1, bb_clk1_a, 1);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, bb_clk2, bb_clk2_a, 2);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk1, rf_clk1_a, 4);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8916, rf_clk2, rf_clk2_a, 5);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk1_pin, bb_clk1_a_pin, 1);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, bb_clk2_pin, bb_clk2_a_pin, 2);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk1_pin, rf_clk1_a_pin, 4);
-+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8916, rf_clk2_pin, rf_clk2_a_pin, 5);
-+
-+static struct clk_smd_rpm *msm8916_clks[] = {
-+ [RPM_SMD_PCNOC_CLK] = &msm8916_pcnoc_clk,
-+ [RPM_SMD_PCNOC_A_CLK] = &msm8916_pcnoc_a_clk,
-+ [RPM_SMD_SNOC_CLK] = &msm8916_snoc_clk,
-+ [RPM_SMD_SNOC_A_CLK] = &msm8916_snoc_a_clk,
-+ [RPM_SMD_BIMC_CLK] = &msm8916_bimc_clk,
-+ [RPM_SMD_BIMC_A_CLK] = &msm8916_bimc_a_clk,
-+ [RPM_SMD_QDSS_CLK] = &msm8916_qdss_clk,
-+ [RPM_SMD_QDSS_A_CLK] = &msm8916_qdss_a_clk,
-+ [RPM_SMD_BB_CLK1] = &msm8916_bb_clk1,
-+ [RPM_SMD_BB_CLK1_A] = &msm8916_bb_clk1_a,
-+ [RPM_SMD_BB_CLK2] = &msm8916_bb_clk2,
-+ [RPM_SMD_BB_CLK2_A] = &msm8916_bb_clk2_a,
-+ [RPM_SMD_RF_CLK1] = &msm8916_rf_clk1,
-+ [RPM_SMD_RF_CLK1_A] = &msm8916_rf_clk1_a,
-+ [RPM_SMD_RF_CLK2] = &msm8916_rf_clk2,
-+ [RPM_SMD_RF_CLK2_A] = &msm8916_rf_clk2_a,
-+ [RPM_SMD_BB_CLK1_PIN] = &msm8916_bb_clk1_pin,
-+ [RPM_SMD_BB_CLK1_A_PIN] = &msm8916_bb_clk1_a_pin,
-+ [RPM_SMD_BB_CLK2_PIN] = &msm8916_bb_clk2_pin,
-+ [RPM_SMD_BB_CLK2_A_PIN] = &msm8916_bb_clk2_a_pin,
-+ [RPM_SMD_RF_CLK1_PIN] = &msm8916_rf_clk1_pin,
-+ [RPM_SMD_RF_CLK1_A_PIN] = &msm8916_rf_clk1_a_pin,
-+ [RPM_SMD_RF_CLK2_PIN] = &msm8916_rf_clk2_pin,
-+ [RPM_SMD_RF_CLK2_A_PIN] = &msm8916_rf_clk2_a_pin,
-+};
-+
-+static const struct rpm_smd_clk_desc rpm_clk_msm8916 = {
-+ .clks = msm8916_clks,
-+ .num_clks = ARRAY_SIZE(msm8916_clks),
-+};
-+
-+static const struct of_device_id rpm_smd_clk_match_table[] = {
-+ { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
-+
-+static int rpm_smd_clk_probe(struct platform_device *pdev)
-+{
-+ struct clk_hw **hws;
-+ struct rpm_cc *rcc;
-+ struct clk_hw_onecell_data *data;
-+ int ret;
-+ size_t num_clks, i;
-+ struct qcom_smd_rpm *rpm;
-+ struct clk_smd_rpm **rpm_smd_clks;
-+ const struct rpm_smd_clk_desc *desc;
-+
-+ rpm = dev_get_drvdata(pdev->dev.parent);
-+ if (!rpm) {
-+ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
-+ return -ENODEV;
-+ }
-+
-+ desc = of_device_get_match_data(&pdev->dev);
-+ if (!desc)
-+ return -EINVAL;
-+
-+ rpm_smd_clks = desc->clks;
-+ num_clks = desc->num_clks;
-+
-+ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
-+ GFP_KERNEL);
-+ if (!rcc)
-+ return -ENOMEM;
-+
-+ hws = rcc->hws;
-+ data = &rcc->data;
-+ data->num = num_clks;
-+
-+ for (i = 0; i < num_clks; i++) {
-+ if (!rpm_smd_clks[i]) {
-+ continue;
-+ }
-+
-+ rpm_smd_clks[i]->rpm = rpm;
-+
-+ ret = clk_smd_rpm_handoff(rpm_smd_clks[i]);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ ret = clk_smd_rpm_enable_scaling(rpm);
-+ if (ret)
-+ goto err;
-+
-+ for (i = 0; i < num_clks; i++) {
-+ if (!rpm_smd_clks[i]) {
-+ data->hws[i] = ERR_PTR(-ENOENT);
-+ continue;
-+ }
-+
-+ ret = devm_clk_hw_register(&pdev->dev, &rpm_smd_clks[i]->hw);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
-+ data);
-+ if (ret)
-+ goto err;
-+
-+ return 0;
-+err:
-+ dev_err(&pdev->dev, "Error registering SMD clock driver (%d)\n", ret);
-+ return ret;
-+}
-+
-+static int rpm_smd_clk_remove(struct platform_device *pdev)
-+{
-+ of_clk_del_provider(pdev->dev.of_node);
-+ return 0;
-+}
-+
-+static struct platform_driver rpm_smd_clk_driver = {
-+ .driver = {
-+ .name = "qcom-clk-smd-rpm",
-+ .of_match_table = rpm_smd_clk_match_table,
-+ },
-+ .probe = rpm_smd_clk_probe,
-+ .remove = rpm_smd_clk_remove,
-+};
-+
-+static int __init rpm_smd_clk_init(void)
-+{
-+ return platform_driver_register(&rpm_smd_clk_driver);
-+}
-+core_initcall(rpm_smd_clk_init);
-+
-+static void __exit rpm_smd_clk_exit(void)
-+{
-+ platform_driver_unregister(&rpm_smd_clk_driver);
-+}
-+module_exit(rpm_smd_clk_exit);
-+
-+MODULE_DESCRIPTION("Qualcomm RPM over SMD Clock Controller Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qcom-clk-smd-rpm");
---- /dev/null
-+++ b/include/dt-bindings/clock/qcom,rpmcc.h
-@@ -0,0 +1,45 @@
-+/*
-+ * Copyright 2015 Linaro Limited
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
-+#define _DT_BINDINGS_CLK_MSM_RPMCC_H
-+
-+/* msm8916 */
-+#define RPM_SMD_XO_CLK_SRC 0
-+#define RPM_SMD_XO_A_CLK_SRC 1
-+#define RPM_SMD_PCNOC_CLK 2
-+#define RPM_SMD_PCNOC_A_CLK 3
-+#define RPM_SMD_SNOC_CLK 4
-+#define RPM_SMD_SNOC_A_CLK 5
-+#define RPM_SMD_BIMC_CLK 6
-+#define RPM_SMD_BIMC_A_CLK 7
-+#define RPM_SMD_QDSS_CLK 8
-+#define RPM_SMD_QDSS_A_CLK 9
-+#define RPM_SMD_BB_CLK1 10
-+#define RPM_SMD_BB_CLK1_A 11
-+#define RPM_SMD_BB_CLK2 12
-+#define RPM_SMD_BB_CLK2_A 13
-+#define RPM_SMD_RF_CLK1 14
-+#define RPM_SMD_RF_CLK1_A 15
-+#define RPM_SMD_RF_CLK2 16
-+#define RPM_SMD_RF_CLK2_A 17
-+#define RPM_SMD_BB_CLK1_PIN 18
-+#define RPM_SMD_BB_CLK1_A_PIN 19
-+#define RPM_SMD_BB_CLK2_PIN 20
-+#define RPM_SMD_BB_CLK2_A_PIN 21
-+#define RPM_SMD_RF_CLK1_PIN 22
-+#define RPM_SMD_RF_CLK1_A_PIN 23
-+#define RPM_SMD_RF_CLK2_PIN 24
-+#define RPM_SMD_RF_CLK2_A_PIN 25
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-4.4/012-2-clk-qcom-Add-support-for-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.4/012-2-clk-qcom-Add-support-for-RPM-Clocks.patch
deleted file mode 100644
index 8a38ead567..0000000000
--- a/target/linux/ipq806x/patches-4.4/012-2-clk-qcom-Add-support-for-RPM-Clocks.patch
+++ /dev/null
@@ -1,586 +0,0 @@
-From 872f91b5ea720c72f81fb46d353c43ecb3263ffa Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Wed, 2 Nov 2016 17:56:57 +0200
-Subject: clk: qcom: Add support for RPM Clocks
-
-This adds initial support for clocks controlled by the Resource
-Power Manager (RPM) processor on some Qualcomm SoCs, which use
-the qcom_rpm driver to communicate with RPM.
-Such platforms are apq8064 and msm8960.
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
- drivers/clk/qcom/Kconfig | 13 +
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-rpm.c | 489 +++++++++++++++++++++
- include/dt-bindings/clock/qcom,rpmcc.h | 24 +
- 5 files changed, 528 insertions(+)
- create mode 100644 drivers/clk/qcom/clk-rpm.c
-
---- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-@@ -11,6 +11,7 @@ Required properties :
- compatible "qcom,rpmcc" should be also included.
-
- "qcom,rpmcc-msm8916", "qcom,rpmcc"
-+ "qcom,rpmcc-apq8064", "qcom,rpmcc"
-
- - #clock-cells : shall contain 1
-
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -12,6 +12,19 @@ config COMMON_CLK_QCOM
- select REGMAP_MMIO
- select RESET_CONTROLLER
-
-+config QCOM_CLK_RPM
-+ tristate "RPM based Clock Controller"
-+ depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
-+ select QCOM_RPMCC
-+ help
-+ The RPM (Resource Power Manager) is a dedicated hardware engine for
-+ managing the shared SoC resources in order to keep the lowest power
-+ profile. It communicates with other hardware subsystems via shared
-+ memory and accepts clock requests, aggregates the requests and turns
-+ the clocks on/off or scales them on demand.
-+ Say Y if you want to support the clocks exposed by the RPM on
-+ platforms such as ipq806x, msm8660, msm8960 etc.
-+
- config QCOM_CLK_SMD_RPM
- tristate "RPM over SMD based Clock Controller"
- depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -23,3 +23,4 @@ obj-$(CONFIG_MSM_GCC_8974) += gcc-msm897
- obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
- obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
- obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
-+obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
---- /dev/null
-+++ b/drivers/clk/qcom/clk-rpm.c
-@@ -0,0 +1,489 @@
-+/*
-+ * Copyright (c) 2016, Linaro Limited
-+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/err.h>
-+#include <linux/export.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/mfd/qcom_rpm.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include <dt-bindings/mfd/qcom-rpm.h>
-+#include <dt-bindings/clock/qcom,rpmcc.h>
-+
-+#define QCOM_RPM_MISC_CLK_TYPE 0x306b6c63
-+#define QCOM_RPM_SCALING_ENABLE_ID 0x2
-+
-+#define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \
-+ static struct clk_rpm _platform##_##_active; \
-+ static struct clk_rpm _platform##_##_name = { \
-+ .rpm_clk_id = (r_id), \
-+ .peer = &_platform##_##_active, \
-+ .rate = INT_MAX, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "pxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_rpm _platform##_##_active = { \
-+ .rpm_clk_id = (r_id), \
-+ .peer = &_platform##_##_name, \
-+ .active_only = true, \
-+ .rate = INT_MAX, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "pxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r) \
-+ static struct clk_rpm _platform##_##_active; \
-+ static struct clk_rpm _platform##_##_name = { \
-+ .rpm_clk_id = (r_id), \
-+ .active_only = true, \
-+ .peer = &_platform##_##_active, \
-+ .rate = (r), \
-+ .branch = true, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_branch_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "pxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_rpm _platform##_##_active = { \
-+ .rpm_clk_id = (r_id), \
-+ .peer = &_platform##_##_name, \
-+ .rate = (r), \
-+ .branch = true, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_branch_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "pxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define DEFINE_CLK_RPM_CXO_BRANCH(_platform, _name, _active, r_id, r) \
-+ static struct clk_rpm _platform##_##_active; \
-+ static struct clk_rpm _platform##_##_name = { \
-+ .rpm_clk_id = (r_id), \
-+ .peer = &_platform##_##_active, \
-+ .rate = (r), \
-+ .branch = true, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_branch_ops, \
-+ .name = #_name, \
-+ .parent_names = (const char *[]){ "cxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }; \
-+ static struct clk_rpm _platform##_##_active = { \
-+ .rpm_clk_id = (r_id), \
-+ .active_only = true, \
-+ .peer = &_platform##_##_name, \
-+ .rate = (r), \
-+ .branch = true, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_rpm_branch_ops, \
-+ .name = #_active, \
-+ .parent_names = (const char *[]){ "cxo_board" }, \
-+ .num_parents = 1, \
-+ }, \
-+ }
-+
-+#define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw)
-+
-+struct clk_rpm {
-+ const int rpm_clk_id;
-+ const bool active_only;
-+ unsigned long rate;
-+ bool enabled;
-+ bool branch;
-+ struct clk_rpm *peer;
-+ struct clk_hw hw;
-+ struct qcom_rpm *rpm;
-+};
-+
-+struct rpm_cc {
-+ struct qcom_rpm *rpm;
-+ struct clk_hw_onecell_data data;
-+ struct clk_hw *hws[];
-+};
-+
-+struct rpm_clk_desc {
-+ struct clk_rpm **clks;
-+ size_t num_clks;
-+};
-+
-+static DEFINE_MUTEX(rpm_clk_lock);
-+
-+static int clk_rpm_handoff(struct clk_rpm *r)
-+{
-+ int ret;
-+ u32 value = INT_MAX;
-+
-+ ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
-+ r->rpm_clk_id, &value, 1);
-+ if (ret)
-+ return ret;
-+ ret = qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
-+ r->rpm_clk_id, &value, 1);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long rate)
-+{
-+ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
-+
-+ return qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE,
-+ r->rpm_clk_id, &value, 1);
-+}
-+
-+static int clk_rpm_set_rate_sleep(struct clk_rpm *r, unsigned long rate)
-+{
-+ u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */
-+
-+ return qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE,
-+ r->rpm_clk_id, &value, 1);
-+}
-+
-+static void to_active_sleep(struct clk_rpm *r, unsigned long rate,
-+ unsigned long *active, unsigned long *sleep)
-+{
-+ *active = rate;
-+
-+ /*
-+ * Active-only clocks don't care what the rate is during sleep. So,
-+ * they vote for zero.
-+ */
-+ if (r->active_only)
-+ *sleep = 0;
-+ else
-+ *sleep = *active;
-+}
-+
-+static int clk_rpm_prepare(struct clk_hw *hw)
-+{
-+ struct clk_rpm *r = to_clk_rpm(hw);
-+ struct clk_rpm *peer = r->peer;
-+ unsigned long this_rate = 0, this_sleep_rate = 0;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ unsigned long active_rate, sleep_rate;
-+ int ret = 0;
-+
-+ mutex_lock(&rpm_clk_lock);
-+
-+ /* Don't send requests to the RPM if the rate has not been set. */
-+ if (!r->rate)
-+ goto out;
-+
-+ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate,
-+ &peer_rate, &peer_sleep_rate);
-+
-+ active_rate = max(this_rate, peer_rate);
-+
-+ if (r->branch)
-+ active_rate = !!active_rate;
-+
-+ ret = clk_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
-+ if (r->branch)
-+ sleep_rate = !!sleep_rate;
-+
-+ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ /* Undo the active set vote and restore it */
-+ ret = clk_rpm_set_rate_active(r, peer_rate);
-+
-+out:
-+ if (!ret)
-+ r->enabled = true;
-+
-+ mutex_unlock(&rpm_clk_lock);
-+
-+ return ret;
-+}
-+
-+static void clk_rpm_unprepare(struct clk_hw *hw)
-+{
-+ struct clk_rpm *r = to_clk_rpm(hw);
-+ struct clk_rpm *peer = r->peer;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ unsigned long active_rate, sleep_rate;
-+ int ret;
-+
-+ mutex_lock(&rpm_clk_lock);
-+
-+ if (!r->rate)
-+ goto out;
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate, &peer_rate,
-+ &peer_sleep_rate);
-+
-+ active_rate = r->branch ? !!peer_rate : peer_rate;
-+ ret = clk_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
-+ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ goto out;
-+
-+ r->enabled = false;
-+
-+out:
-+ mutex_unlock(&rpm_clk_lock);
-+}
-+
-+static int clk_rpm_set_rate(struct clk_hw *hw,
-+ unsigned long rate, unsigned long parent_rate)
-+{
-+ struct clk_rpm *r = to_clk_rpm(hw);
-+ struct clk_rpm *peer = r->peer;
-+ unsigned long active_rate, sleep_rate;
-+ unsigned long this_rate = 0, this_sleep_rate = 0;
-+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
-+ int ret = 0;
-+
-+ mutex_lock(&rpm_clk_lock);
-+
-+ if (!r->enabled)
-+ goto out;
-+
-+ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
-+
-+ /* Take peer clock's rate into account only if it's enabled. */
-+ if (peer->enabled)
-+ to_active_sleep(peer, peer->rate,
-+ &peer_rate, &peer_sleep_rate);
-+
-+ active_rate = max(this_rate, peer_rate);
-+ ret = clk_rpm_set_rate_active(r, active_rate);
-+ if (ret)
-+ goto out;
-+
-+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
-+ ret = clk_rpm_set_rate_sleep(r, sleep_rate);
-+ if (ret)
-+ goto out;
-+
-+ r->rate = rate;
-+
-+out:
-+ mutex_unlock(&rpm_clk_lock);
-+
-+ return ret;
-+}
-+
-+static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ /*
-+ * RPM handles rate rounding and we don't have a way to
-+ * know what the rate will be, so just return whatever
-+ * rate is requested.
-+ */
-+ return rate;
-+}
-+
-+static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_rpm *r = to_clk_rpm(hw);
-+
-+ /*
-+ * RPM handles rate rounding and we don't have a way to
-+ * know what the rate will be, so just return whatever
-+ * rate was set.
-+ */
-+ return r->rate;
-+}
-+
-+static const struct clk_ops clk_rpm_ops = {
-+ .prepare = clk_rpm_prepare,
-+ .unprepare = clk_rpm_unprepare,
-+ .set_rate = clk_rpm_set_rate,
-+ .round_rate = clk_rpm_round_rate,
-+ .recalc_rate = clk_rpm_recalc_rate,
-+};
-+
-+static const struct clk_ops clk_rpm_branch_ops = {
-+ .prepare = clk_rpm_prepare,
-+ .unprepare = clk_rpm_unprepare,
-+ .round_rate = clk_rpm_round_rate,
-+ .recalc_rate = clk_rpm_recalc_rate,
-+};
-+
-+/* apq8064 */
-+DEFINE_CLK_RPM(apq8064, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
-+DEFINE_CLK_RPM(apq8064, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
-+DEFINE_CLK_RPM(apq8064, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
-+DEFINE_CLK_RPM(apq8064, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
-+DEFINE_CLK_RPM(apq8064, mmfab_clk, mmfab_a_clk, QCOM_RPM_MM_FABRIC_CLK);
-+DEFINE_CLK_RPM(apq8064, mmfpb_clk, mmfpb_a_clk, QCOM_RPM_MMFPB_CLK);
-+DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
-+DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
-+DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
-+
-+static struct clk_rpm *apq8064_clks[] = {
-+ [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
-+ [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
-+ [RPM_CFPB_CLK] = &apq8064_cfpb_clk,
-+ [RPM_CFPB_A_CLK] = &apq8064_cfpb_a_clk,
-+ [RPM_DAYTONA_FABRIC_CLK] = &apq8064_daytona_clk,
-+ [RPM_DAYTONA_FABRIC_A_CLK] = &apq8064_daytona_a_clk,
-+ [RPM_EBI1_CLK] = &apq8064_ebi1_clk,
-+ [RPM_EBI1_A_CLK] = &apq8064_ebi1_a_clk,
-+ [RPM_MM_FABRIC_CLK] = &apq8064_mmfab_clk,
-+ [RPM_MM_FABRIC_A_CLK] = &apq8064_mmfab_a_clk,
-+ [RPM_MMFPB_CLK] = &apq8064_mmfpb_clk,
-+ [RPM_MMFPB_A_CLK] = &apq8064_mmfpb_a_clk,
-+ [RPM_SYS_FABRIC_CLK] = &apq8064_sfab_clk,
-+ [RPM_SYS_FABRIC_A_CLK] = &apq8064_sfab_a_clk,
-+ [RPM_SFPB_CLK] = &apq8064_sfpb_clk,
-+ [RPM_SFPB_A_CLK] = &apq8064_sfpb_a_clk,
-+ [RPM_QDSS_CLK] = &apq8064_qdss_clk,
-+ [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
-+};
-+
-+static const struct rpm_clk_desc rpm_clk_apq8064 = {
-+ .clks = apq8064_clks,
-+ .num_clks = ARRAY_SIZE(apq8064_clks),
-+};
-+
-+static const struct of_device_id rpm_clk_match_table[] = {
-+ { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
-+
-+static int rpm_clk_probe(struct platform_device *pdev)
-+{
-+ struct clk_hw **hws;
-+ struct rpm_cc *rcc;
-+ struct clk_hw_onecell_data *data;
-+ int ret;
-+ size_t num_clks, i;
-+ struct qcom_rpm *rpm;
-+ struct clk_rpm **rpm_clks;
-+ const struct rpm_clk_desc *desc;
-+
-+ rpm = dev_get_drvdata(pdev->dev.parent);
-+ if (!rpm) {
-+ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
-+ return -ENODEV;
-+ }
-+
-+ desc = of_device_get_match_data(&pdev->dev);
-+ if (!desc)
-+ return -EINVAL;
-+
-+ rpm_clks = desc->clks;
-+ num_clks = desc->num_clks;
-+
-+ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
-+ GFP_KERNEL);
-+ if (!rcc)
-+ return -ENOMEM;
-+
-+ hws = rcc->hws;
-+ data = &rcc->data;
-+ data->num = num_clks;
-+
-+ for (i = 0; i < num_clks; i++) {
-+ if (!rpm_clks[i])
-+ continue;
-+
-+ rpm_clks[i]->rpm = rpm;
-+
-+ ret = clk_rpm_handoff(rpm_clks[i]);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ for (i = 0; i < num_clks; i++) {
-+ if (!rpm_clks[i]) {
-+ data->hws[i] = ERR_PTR(-ENOENT);
-+ continue;
-+ }
-+
-+ ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
-+ data);
-+ if (ret)
-+ goto err;
-+
-+ return 0;
-+err:
-+ dev_err(&pdev->dev, "Error registering RPM Clock driver (%d)\n", ret);
-+ return ret;
-+}
-+
-+static int rpm_clk_remove(struct platform_device *pdev)
-+{
-+ of_clk_del_provider(pdev->dev.of_node);
-+ return 0;
-+}
-+
-+static struct platform_driver rpm_clk_driver = {
-+ .driver = {
-+ .name = "qcom-clk-rpm",
-+ .of_match_table = rpm_clk_match_table,
-+ },
-+ .probe = rpm_clk_probe,
-+ .remove = rpm_clk_remove,
-+};
-+
-+static int __init rpm_clk_init(void)
-+{
-+ return platform_driver_register(&rpm_clk_driver);
-+}
-+core_initcall(rpm_clk_init);
-+
-+static void __exit rpm_clk_exit(void)
-+{
-+ platform_driver_unregister(&rpm_clk_driver);
-+}
-+module_exit(rpm_clk_exit);
-+
-+MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qcom-clk-rpm");
---- a/include/dt-bindings/clock/qcom,rpmcc.h
-+++ b/include/dt-bindings/clock/qcom,rpmcc.h
-@@ -14,6 +14,30 @@
- #ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
- #define _DT_BINDINGS_CLK_MSM_RPMCC_H
-
-+/* apq8064 */
-+#define RPM_PXO_CLK 0
-+#define RPM_PXO_A_CLK 1
-+#define RPM_CXO_CLK 2
-+#define RPM_CXO_A_CLK 3
-+#define RPM_APPS_FABRIC_CLK 4
-+#define RPM_APPS_FABRIC_A_CLK 5
-+#define RPM_CFPB_CLK 6
-+#define RPM_CFPB_A_CLK 7
-+#define RPM_QDSS_CLK 8
-+#define RPM_QDSS_A_CLK 9
-+#define RPM_DAYTONA_FABRIC_CLK 10
-+#define RPM_DAYTONA_FABRIC_A_CLK 11
-+#define RPM_EBI1_CLK 12
-+#define RPM_EBI1_A_CLK 13
-+#define RPM_MM_FABRIC_CLK 14
-+#define RPM_MM_FABRIC_A_CLK 15
-+#define RPM_MMFPB_CLK 16
-+#define RPM_MMFPB_A_CLK 17
-+#define RPM_SYS_FABRIC_CLK 18
-+#define RPM_SYS_FABRIC_A_CLK 19
-+#define RPM_SFPB_CLK 20
-+#define RPM_SFPB_A_CLK 21
-+
- /* msm8916 */
- #define RPM_SMD_XO_CLK_SRC 0
- #define RPM_SMD_XO_A_CLK_SRC 1
diff --git a/target/linux/ipq806x/patches-4.4/012-3-clk-qcom-clk-rpm-Fix-clk_hw-references.patch b/target/linux/ipq806x/patches-4.4/012-3-clk-qcom-clk-rpm-Fix-clk_hw-references.patch
deleted file mode 100644
index e5c1870eab..0000000000
--- a/target/linux/ipq806x/patches-4.4/012-3-clk-qcom-clk-rpm-Fix-clk_hw-references.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From c260524aba53b57f72b5446ed553080df30b4d09 Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Wed, 23 Nov 2016 16:52:49 +0200
-Subject: clk: qcom: clk-rpm: Fix clk_hw references
-
-Fix the clk_hw references to the actual clocks and add a xlate function
-to return the hw pointers from the already existing static array.
-
-Reported-by: Michael Scott <michael.scott@linaro.org>
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/qcom/clk-rpm.c | 36 ++++++++++++++++++++++--------------
- 1 file changed, 22 insertions(+), 14 deletions(-)
-
---- a/drivers/clk/qcom/clk-rpm.c
-+++ b/drivers/clk/qcom/clk-rpm.c
-@@ -127,8 +127,8 @@ struct clk_rpm {
-
- struct rpm_cc {
- struct qcom_rpm *rpm;
-- struct clk_hw_onecell_data data;
-- struct clk_hw *hws[];
-+ struct clk_rpm **clks;
-+ size_t num_clks;
- };
-
- struct rpm_clk_desc {
-@@ -391,11 +391,23 @@ static const struct of_device_id rpm_clk
- };
- MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
-
-+static struct clk_hw *qcom_rpm_clk_hw_get(struct of_phandle_args *clkspec,
-+ void *data)
-+{
-+ struct rpm_cc *rcc = data;
-+ unsigned int idx = clkspec->args[0];
-+
-+ if (idx >= rcc->num_clks) {
-+ pr_err("%s: invalid index %u\n", __func__, idx);
-+ return ERR_PTR(-EINVAL);
-+ }
-+
-+ return rcc->clks[idx] ? &rcc->clks[idx]->hw : ERR_PTR(-ENOENT);
-+}
-+
- static int rpm_clk_probe(struct platform_device *pdev)
- {
-- struct clk_hw **hws;
- struct rpm_cc *rcc;
-- struct clk_hw_onecell_data *data;
- int ret;
- size_t num_clks, i;
- struct qcom_rpm *rpm;
-@@ -415,14 +427,12 @@ static int rpm_clk_probe(struct platform
- rpm_clks = desc->clks;
- num_clks = desc->num_clks;
-
-- rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*hws) * num_clks,
-- GFP_KERNEL);
-+ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc), GFP_KERNEL);
- if (!rcc)
- return -ENOMEM;
-
-- hws = rcc->hws;
-- data = &rcc->data;
-- data->num = num_clks;
-+ rcc->clks = rpm_clks;
-+ rcc->num_clks = num_clks;
-
- for (i = 0; i < num_clks; i++) {
- if (!rpm_clks[i])
-@@ -436,18 +446,16 @@ static int rpm_clk_probe(struct platform
- }
-
- for (i = 0; i < num_clks; i++) {
-- if (!rpm_clks[i]) {
-- data->hws[i] = ERR_PTR(-ENOENT);
-+ if (!rpm_clks[i])
- continue;
-- }
-
- ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw);
- if (ret)
- goto err;
- }
-
-- ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
-- data);
-+ ret = of_clk_add_hw_provider(pdev->dev.of_node, qcom_rpm_clk_hw_get,
-+ rcc);
- if (ret)
- goto err;
-
diff --git a/target/linux/ipq806x/patches-4.4/015-1-thermal-qcom-tsens-Add-a-skeletal-TSENS-drivers.patch b/target/linux/ipq806x/patches-4.4/015-1-thermal-qcom-tsens-Add-a-skeletal-TSENS-drivers.patch
deleted file mode 100644
index ef7e2f4152..0000000000
--- a/target/linux/ipq806x/patches-4.4/015-1-thermal-qcom-tsens-Add-a-skeletal-TSENS-drivers.patch
+++ /dev/null
@@ -1,536 +0,0 @@
-From 9066073c6c27994a30187abf3b674770b4088348 Mon Sep 17 00:00:00 2001
-From: Rajendra Nayak <rnayak@codeaurora.org>
-Date: Thu, 5 May 2016 14:21:39 +0530
-Subject: thermal: qcom: tsens: Add a skeletal TSENS drivers
-
-TSENS is Qualcomms' thermal temperature sensor device. It
-supports reading temperatures from multiple thermal sensors
-present on various QCOM SoCs.
-Calibration data is generally read from a non-volatile memory
-(eeprom) device.
-
-Add a skeleton driver with all the necessary abstractions so
-a variety of qcom device families which support TSENS can
-add driver extensions.
-
-Also add the required device tree bindings which can be used
-to describe the TSENS device in DT.
-
-Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-Signed-off-by: Zhang Rui <rui.zhang@intel.com>
----
- .../devicetree/bindings/thermal/qcom-tsens.txt | 21 +++
- drivers/thermal/Kconfig | 5 +
- drivers/thermal/Makefile | 1 +
- drivers/thermal/qcom/Kconfig | 11 ++
- drivers/thermal/qcom/Makefile | 2 +
- drivers/thermal/qcom/tsens-common.c | 141 +++++++++++++++
- drivers/thermal/qcom/tsens.c | 195 +++++++++++++++++++++
- drivers/thermal/qcom/tsens.h | 90 ++++++++++
- 8 files changed, 466 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
- create mode 100644 drivers/thermal/qcom/Kconfig
- create mode 100644 drivers/thermal/qcom/Makefile
- create mode 100644 drivers/thermal/qcom/tsens-common.c
- create mode 100644 drivers/thermal/qcom/tsens.c
- create mode 100644 drivers/thermal/qcom/tsens.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-@@ -0,0 +1,21 @@
-+* QCOM SoC Temperature Sensor (TSENS)
-+
-+Required properties:
-+- compatible :
-+ - "qcom,msm8916-tsens" : For 8916 Family of SoCs
-+ - "qcom,msm8974-tsens" : For 8974 Family of SoCs
-+ - "qcom,msm8996-tsens" : For 8996 Family of SoCs
-+
-+- reg: Address range of the thermal registers
-+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
-+- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
-+nvmem cells
-+
-+Example:
-+tsens: thermal-sensor@900000 {
-+ compatible = "qcom,msm8916-tsens";
-+ reg = <0x4a8000 0x2000>;
-+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-+ nvmem-cell-names = "caldata", "calsel";
-+ #thermal-sensor-cells = <1>;
-+ };
---- a/drivers/thermal/Kconfig
-+++ b/drivers/thermal/Kconfig
-@@ -391,4 +391,9 @@ config QCOM_SPMI_TEMP_ALARM
- real time die temperature if an ADC is present or an estimate of the
- temperature based upon the over temperature stage value.
-
-+menu "Qualcomm thermal drivers"
-+depends on (ARCH_QCOM && OF) || COMPILE_TEST
-+source "drivers/thermal/qcom/Kconfig"
-+endmenu
-+
- endif
---- a/drivers/thermal/Makefile
-+++ b/drivers/thermal/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_INTEL_PCH_THERMAL) += intel
- obj-$(CONFIG_ST_THERMAL) += st/
- obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o
- obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
-+obj-$(CONFIG_QCOM_TSENS) += qcom/
---- /dev/null
-+++ b/drivers/thermal/qcom/Kconfig
-@@ -0,0 +1,11 @@
-+config QCOM_TSENS
-+ tristate "Qualcomm TSENS Temperature Alarm"
-+ depends on THERMAL
-+ depends on QCOM_QFPROM
-+ depends on ARCH_QCOM || COMPILE_TEST
-+ help
-+ This enables the thermal sysfs driver for the TSENS device. It shows
-+ up in Sysfs as a thermal zone with multiple trip points. Disabling the
-+ thermal zone device via the mode file results in disabling the sensor.
-+ Also able to set threshold temperature for both hot and cold and update
-+ when a threshold is reached.
---- /dev/null
-+++ b/drivers/thermal/qcom/Makefile
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
-+qcom_tsens-y += tsens.o tsens-common.o
---- /dev/null
-+++ b/drivers/thermal/qcom/tsens-common.c
-@@ -0,0 +1,141 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/of_address.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include "tsens.h"
-+
-+#define S0_ST_ADDR 0x1030
-+#define SN_ADDR_OFFSET 0x4
-+#define SN_ST_TEMP_MASK 0x3ff
-+#define CAL_DEGC_PT1 30
-+#define CAL_DEGC_PT2 120
-+#define SLOPE_FACTOR 1000
-+#define SLOPE_DEFAULT 3200
-+
-+char *qfprom_read(struct device *dev, const char *cname)
-+{
-+ struct nvmem_cell *cell;
-+ ssize_t data;
-+ char *ret;
-+
-+ cell = nvmem_cell_get(dev, cname);
-+ if (IS_ERR(cell))
-+ return ERR_CAST(cell);
-+
-+ ret = nvmem_cell_read(cell, &data);
-+ nvmem_cell_put(cell);
-+
-+ return ret;
-+}
-+
-+/*
-+ * Use this function on devices where slope and offset calculations
-+ * depend on calibration data read from qfprom. On others the slope
-+ * and offset values are derived from tz->tzp->slope and tz->tzp->offset
-+ * resp.
-+ */
-+void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
-+ u32 *p2, u32 mode)
-+{
-+ int i;
-+ int num, den;
-+
-+ for (i = 0; i < tmdev->num_sensors; i++) {
-+ dev_dbg(tmdev->dev,
-+ "sensor%d - data_point1:%#x data_point2:%#x\n",
-+ i, p1[i], p2[i]);
-+
-+ tmdev->sensor[i].slope = SLOPE_DEFAULT;
-+ if (mode == TWO_PT_CALIB) {
-+ /*
-+ * slope (m) = adc_code2 - adc_code1 (y2 - y1)/
-+ * temp_120_degc - temp_30_degc (x2 - x1)
-+ */
-+ num = p2[i] - p1[i];
-+ num *= SLOPE_FACTOR;
-+ den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
-+ tmdev->sensor[i].slope = num / den;
-+ }
-+
-+ tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
-+ (CAL_DEGC_PT1 *
-+ tmdev->sensor[i].slope);
-+ dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset);
-+ }
-+}
-+
-+static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
-+{
-+ int degc, num, den;
-+
-+ num = (adc_code * SLOPE_FACTOR) - s->offset;
-+ den = s->slope;
-+
-+ if (num > 0)
-+ degc = num + (den / 2);
-+ else if (num < 0)
-+ degc = num - (den / 2);
-+ else
-+ degc = num;
-+
-+ degc /= den;
-+
-+ return degc;
-+}
-+
-+int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
-+{
-+ struct tsens_sensor *s = &tmdev->sensor[id];
-+ u32 code;
-+ unsigned int sensor_addr;
-+ int last_temp = 0, ret;
-+
-+ sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
-+ ret = regmap_read(tmdev->map, sensor_addr, &code);
-+ if (ret)
-+ return ret;
-+ last_temp = code & SN_ST_TEMP_MASK;
-+
-+ *temp = code_to_degc(last_temp, s) * 1000;
-+
-+ return 0;
-+}
-+
-+static const struct regmap_config tsens_config = {
-+ .reg_bits = 32,
-+ .val_bits = 32,
-+ .reg_stride = 4,
-+};
-+
-+int __init init_common(struct tsens_device *tmdev)
-+{
-+ void __iomem *base;
-+
-+ base = of_iomap(tmdev->dev->of_node, 0);
-+ if (IS_ERR(base))
-+ return -EINVAL;
-+
-+ tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
-+ if (!tmdev->map) {
-+ iounmap(base);
-+ return -ENODEV;
-+ }
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -0,0 +1,195 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+#include "tsens.h"
-+
-+static int tsens_get_temp(void *data, int *temp)
-+{
-+ const struct tsens_sensor *s = data;
-+ struct tsens_device *tmdev = s->tmdev;
-+
-+ return tmdev->ops->get_temp(tmdev, s->id, temp);
-+}
-+
-+static int tsens_get_trend(void *data, long *temp)
-+{
-+ const struct tsens_sensor *s = data;
-+ struct tsens_device *tmdev = s->tmdev;
-+
-+ if (tmdev->ops->get_trend)
-+ return tmdev->ops->get_trend(tmdev, s->id, temp);
-+
-+ return -ENOTSUPP;
-+}
-+
-+static int tsens_suspend(struct device *dev)
-+{
-+ struct tsens_device *tmdev = dev_get_drvdata(dev);
-+
-+ if (tmdev->ops && tmdev->ops->suspend)
-+ return tmdev->ops->suspend(tmdev);
-+
-+ return 0;
-+}
-+
-+static int tsens_resume(struct device *dev)
-+{
-+ struct tsens_device *tmdev = dev_get_drvdata(dev);
-+
-+ if (tmdev->ops && tmdev->ops->resume)
-+ return tmdev->ops->resume(tmdev);
-+
-+ return 0;
-+}
-+
-+static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
-+
-+static const struct of_device_id tsens_table[] = {
-+ {
-+ .compatible = "qcom,msm8916-tsens",
-+ }, {
-+ .compatible = "qcom,msm8974-tsens",
-+ },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, tsens_table);
-+
-+static const struct thermal_zone_of_device_ops tsens_of_ops = {
-+ .get_temp = tsens_get_temp,
-+ .get_trend = tsens_get_trend,
-+};
-+
-+static int tsens_register(struct tsens_device *tmdev)
-+{
-+ int i;
-+ struct thermal_zone_device *tzd;
-+ u32 *hw_id, n = tmdev->num_sensors;
-+
-+ hw_id = devm_kcalloc(tmdev->dev, n, sizeof(u32), GFP_KERNEL);
-+ if (!hw_id)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < tmdev->num_sensors; i++) {
-+ tmdev->sensor[i].tmdev = tmdev;
-+ tmdev->sensor[i].id = i;
-+ tzd = devm_thermal_zone_of_sensor_register(tmdev->dev, i,
-+ &tmdev->sensor[i],
-+ &tsens_of_ops);
-+ if (IS_ERR(tzd))
-+ continue;
-+ tmdev->sensor[i].tzd = tzd;
-+ if (tmdev->ops->enable)
-+ tmdev->ops->enable(tmdev, i);
-+ }
-+ return 0;
-+}
-+
-+static int tsens_probe(struct platform_device *pdev)
-+{
-+ int ret, i;
-+ struct device *dev;
-+ struct device_node *np;
-+ struct tsens_sensor *s;
-+ struct tsens_device *tmdev;
-+ const struct tsens_data *data;
-+ const struct of_device_id *id;
-+
-+ if (pdev->dev.of_node)
-+ dev = &pdev->dev;
-+ else
-+ dev = pdev->dev.parent;
-+
-+ np = dev->of_node;
-+
-+ id = of_match_node(tsens_table, np);
-+ if (!id)
-+ return -EINVAL;
-+
-+ data = id->data;
-+
-+ if (data->num_sensors <= 0) {
-+ dev_err(dev, "invalid number of sensors\n");
-+ return -EINVAL;
-+ }
-+
-+ tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
-+ data->num_sensors * sizeof(*s), GFP_KERNEL);
-+ if (!tmdev)
-+ return -ENOMEM;
-+
-+ tmdev->dev = dev;
-+ tmdev->num_sensors = data->num_sensors;
-+ tmdev->ops = data->ops;
-+ for (i = 0; i < tmdev->num_sensors; i++) {
-+ if (data->hw_ids)
-+ tmdev->sensor[i].hw_id = data->hw_ids[i];
-+ else
-+ tmdev->sensor[i].hw_id = i;
-+ }
-+
-+ if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp)
-+ return -EINVAL;
-+
-+ ret = tmdev->ops->init(tmdev);
-+ if (ret < 0) {
-+ dev_err(dev, "tsens init failed\n");
-+ return ret;
-+ }
-+
-+ if (tmdev->ops->calibrate) {
-+ ret = tmdev->ops->calibrate(tmdev);
-+ if (ret < 0) {
-+ dev_err(dev, "tsens calibration failed\n");
-+ return ret;
-+ }
-+ }
-+
-+ ret = tsens_register(tmdev);
-+
-+ platform_set_drvdata(pdev, tmdev);
-+
-+ return ret;
-+}
-+
-+static int tsens_remove(struct platform_device *pdev)
-+{
-+ struct tsens_device *tmdev = platform_get_drvdata(pdev);
-+
-+ if (tmdev->ops->disable)
-+ tmdev->ops->disable(tmdev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver tsens_driver = {
-+ .probe = tsens_probe,
-+ .remove = tsens_remove,
-+ .driver = {
-+ .name = "qcom-tsens",
-+ .pm = &tsens_pm_ops,
-+ .of_match_table = tsens_table,
-+ },
-+};
-+module_platform_driver(tsens_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("QCOM Temperature Sensor driver");
-+MODULE_ALIAS("platform:qcom-tsens");
---- /dev/null
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -0,0 +1,90 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+#ifndef __QCOM_TSENS_H__
-+#define __QCOM_TSENS_H__
-+
-+#define ONE_PT_CALIB 0x1
-+#define ONE_PT_CALIB2 0x2
-+#define TWO_PT_CALIB 0x3
-+
-+struct tsens_device;
-+
-+struct tsens_sensor {
-+ struct tsens_device *tmdev;
-+ struct thermal_zone_device *tzd;
-+ int offset;
-+ int id;
-+ int hw_id;
-+ int slope;
-+ u32 status;
-+};
-+
-+/**
-+ * struct tsens_ops - operations as supported by the tsens device
-+ * @init: Function to initialize the tsens device
-+ * @calibrate: Function to calibrate the tsens device
-+ * @get_temp: Function which returns the temp in millidegC
-+ * @enable: Function to enable (clocks/power) tsens device
-+ * @disable: Function to disable the tsens device
-+ * @suspend: Function to suspend the tsens device
-+ * @resume: Function to resume the tsens device
-+ * @get_trend: Function to get the thermal/temp trend
-+ */
-+struct tsens_ops {
-+ /* mandatory callbacks */
-+ int (*init)(struct tsens_device *);
-+ int (*calibrate)(struct tsens_device *);
-+ int (*get_temp)(struct tsens_device *, int, int *);
-+ /* optional callbacks */
-+ int (*enable)(struct tsens_device *, int);
-+ void (*disable)(struct tsens_device *);
-+ int (*suspend)(struct tsens_device *);
-+ int (*resume)(struct tsens_device *);
-+ int (*get_trend)(struct tsens_device *, int, long *);
-+};
-+
-+/**
-+ * struct tsens_data - tsens instance specific data
-+ * @num_sensors: Max number of sensors supported by platform
-+ * @ops: operations the tsens instance supports
-+ * @hw_ids: Subset of sensors ids supported by platform, if not the first n
-+ */
-+struct tsens_data {
-+ const u32 num_sensors;
-+ const struct tsens_ops *ops;
-+ unsigned int *hw_ids;
-+};
-+
-+/* Registers to be saved/restored across a context loss */
-+struct tsens_context {
-+ int threshold;
-+ int control;
-+};
-+
-+struct tsens_device {
-+ struct device *dev;
-+ u32 num_sensors;
-+ struct regmap *map;
-+ struct regmap_field *status_field;
-+ struct tsens_context ctx;
-+ bool trdy;
-+ const struct tsens_ops *ops;
-+ struct tsens_sensor sensor[0];
-+};
-+
-+char *qfprom_read(struct device *, const char *);
-+void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
-+int init_common(struct tsens_device *);
-+int get_temp_common(struct tsens_device *, int, int *);
-+
-+#endif /* __QCOM_TSENS_H__ */
diff --git a/target/linux/ipq806x/patches-4.4/015-2-thermal-qcom-tsens-8916-Add-support-for-8916-family-of-SoCs.patch b/target/linux/ipq806x/patches-4.4/015-2-thermal-qcom-tsens-8916-Add-support-for-8916-family-of-SoCs.patch
deleted file mode 100644
index d07619645c..0000000000
--- a/target/linux/ipq806x/patches-4.4/015-2-thermal-qcom-tsens-8916-Add-support-for-8916-family-of-SoCs.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 840a5bd3ed3fdd62456d4d26c3128ec10496555b Mon Sep 17 00:00:00 2001
-From: Rajendra Nayak <rnayak@codeaurora.org>
-Date: Thu, 5 May 2016 14:21:40 +0530
-Subject: thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
-
-Add support to calibrate sensors on 8916 family and also add common
-functions to read temperature from sensors (This can be reused on
-other SoCs having similar TSENS device)
-The calibration data is read from eeprom using the generic nvmem
-framework apis.
-
-Based on the original code by Siddartha Mohanadoss and Stephen Boyd.
-
-Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-Signed-off-by: Zhang Rui <rui.zhang@intel.com>
----
- drivers/thermal/qcom/Makefile | 2 +-
- drivers/thermal/qcom/tsens-8916.c | 113 ++++++++++++++++++++++++++++++++++++++
- drivers/thermal/qcom/tsens.c | 1 +
- drivers/thermal/qcom/tsens.h | 2 +
- 4 files changed, 117 insertions(+), 1 deletion(-)
- create mode 100644 drivers/thermal/qcom/tsens-8916.c
-
---- a/drivers/thermal/qcom/Makefile
-+++ b/drivers/thermal/qcom/Makefile
-@@ -1,2 +1,2 @@
- obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
--qcom_tsens-y += tsens.o tsens-common.o
-+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o
---- /dev/null
-+++ b/drivers/thermal/qcom/tsens-8916.c
-@@ -0,0 +1,113 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/platform_device.h>
-+#include "tsens.h"
-+
-+/* eeprom layout data for 8916 */
-+#define BASE0_MASK 0x0000007f
-+#define BASE1_MASK 0xfe000000
-+#define BASE0_SHIFT 0
-+#define BASE1_SHIFT 25
-+
-+#define S0_P1_MASK 0x00000f80
-+#define S1_P1_MASK 0x003e0000
-+#define S2_P1_MASK 0xf8000000
-+#define S3_P1_MASK 0x000003e0
-+#define S4_P1_MASK 0x000f8000
-+
-+#define S0_P2_MASK 0x0001f000
-+#define S1_P2_MASK 0x07c00000
-+#define S2_P2_MASK 0x0000001f
-+#define S3_P2_MASK 0x00007c00
-+#define S4_P2_MASK 0x01f00000
-+
-+#define S0_P1_SHIFT 7
-+#define S1_P1_SHIFT 17
-+#define S2_P1_SHIFT 27
-+#define S3_P1_SHIFT 5
-+#define S4_P1_SHIFT 15
-+
-+#define S0_P2_SHIFT 12
-+#define S1_P2_SHIFT 22
-+#define S2_P2_SHIFT 0
-+#define S3_P2_SHIFT 10
-+#define S4_P2_SHIFT 20
-+
-+#define CAL_SEL_MASK 0xe0000000
-+#define CAL_SEL_SHIFT 29
-+
-+static int calibrate_8916(struct tsens_device *tmdev)
-+{
-+ int base0 = 0, base1 = 0, i;
-+ u32 p1[5], p2[5];
-+ int mode = 0;
-+ u32 *qfprom_cdata, *qfprom_csel;
-+
-+ qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
-+ if (IS_ERR(qfprom_cdata))
-+ return PTR_ERR(qfprom_cdata);
-+
-+ qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel");
-+ if (IS_ERR(qfprom_csel))
-+ return PTR_ERR(qfprom_csel);
-+
-+ mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
-+ dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
-+
-+ switch (mode) {
-+ case TWO_PT_CALIB:
-+ base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT;
-+ p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
-+ p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
-+ p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT;
-+ p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
-+ p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
-+ for (i = 0; i < tmdev->num_sensors; i++)
-+ p2[i] = ((base1 + p2[i]) << 3);
-+ /* Fall through */
-+ case ONE_PT_CALIB2:
-+ base0 = (qfprom_cdata[0] & BASE0_MASK);
-+ p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
-+ p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
-+ p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
-+ p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
-+ p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
-+ for (i = 0; i < tmdev->num_sensors; i++)
-+ p1[i] = (((base0) + p1[i]) << 3);
-+ break;
-+ default:
-+ for (i = 0; i < tmdev->num_sensors; i++) {
-+ p1[i] = 500;
-+ p2[i] = 780;
-+ }
-+ break;
-+ }
-+
-+ compute_intercept_slope(tmdev, p1, p2, mode);
-+
-+ return 0;
-+}
-+
-+const struct tsens_ops ops_8916 = {
-+ .init = init_common,
-+ .calibrate = calibrate_8916,
-+ .get_temp = get_temp_common,
-+};
-+
-+const struct tsens_data data_8916 = {
-+ .num_sensors = 5,
-+ .ops = &ops_8916,
-+ .hw_ids = (unsigned int []){0, 1, 2, 4, 5 },
-+};
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -65,6 +65,7 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, t
- static const struct of_device_id tsens_table[] = {
- {
- .compatible = "qcom,msm8916-tsens",
-+ .data = &data_8916,
- }, {
- .compatible = "qcom,msm8974-tsens",
- },
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -87,4 +87,6 @@ void compute_intercept_slope(struct tsen
- int init_common(struct tsens_device *);
- int get_temp_common(struct tsens_device *, int, int *);
-
-+extern const struct tsens_data data_8916;
-+
- #endif /* __QCOM_TSENS_H__ */
diff --git a/target/linux/ipq806x/patches-4.4/015-3-thermal-qcom-tsens-8974-Add-support-for-8974-family-of-SoCs.patch b/target/linux/ipq806x/patches-4.4/015-3-thermal-qcom-tsens-8974-Add-support-for-8974-family-of-SoCs.patch
deleted file mode 100644
index 671f461057..0000000000
--- a/target/linux/ipq806x/patches-4.4/015-3-thermal-qcom-tsens-8974-Add-support-for-8974-family-of-SoCs.patch
+++ /dev/null
@@ -1,293 +0,0 @@
-From 5e6703bd2d83548998848865cb9a9a795f31a311 Mon Sep 17 00:00:00 2001
-From: Rajendra Nayak <rnayak@codeaurora.org>
-Date: Thu, 5 May 2016 14:21:41 +0530
-Subject: thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
-
-Add .calibrate support for 8974 family as part of tsens_ops.
-
-Based on the original code by Siddartha Mohanadoss and Stephen Boyd.
-
-Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-Signed-off-by: Zhang Rui <rui.zhang@intel.com>
----
- drivers/thermal/qcom/Makefile | 2 +-
- drivers/thermal/qcom/tsens-8974.c | 244 ++++++++++++++++++++++++++++++++++++++
- drivers/thermal/qcom/tsens.c | 1 +
- drivers/thermal/qcom/tsens.h | 2 +-
- 4 files changed, 247 insertions(+), 2 deletions(-)
- create mode 100644 drivers/thermal/qcom/tsens-8974.c
-
---- a/drivers/thermal/qcom/Makefile
-+++ b/drivers/thermal/qcom/Makefile
-@@ -1,2 +1,2 @@
- obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
--qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o
-+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o
---- /dev/null
-+++ b/drivers/thermal/qcom/tsens-8974.c
-@@ -0,0 +1,244 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/platform_device.h>
-+#include "tsens.h"
-+
-+/* eeprom layout data for 8974 */
-+#define BASE1_MASK 0xff
-+#define S0_P1_MASK 0x3f00
-+#define S1_P1_MASK 0xfc000
-+#define S2_P1_MASK 0x3f00000
-+#define S3_P1_MASK 0xfc000000
-+#define S4_P1_MASK 0x3f
-+#define S5_P1_MASK 0xfc0
-+#define S6_P1_MASK 0x3f000
-+#define S7_P1_MASK 0xfc0000
-+#define S8_P1_MASK 0x3f000000
-+#define S8_P1_MASK_BKP 0x3f
-+#define S9_P1_MASK 0x3f
-+#define S9_P1_MASK_BKP 0xfc0
-+#define S10_P1_MASK 0xfc0
-+#define S10_P1_MASK_BKP 0x3f000
-+#define CAL_SEL_0_1 0xc0000000
-+#define CAL_SEL_2 0x40000000
-+#define CAL_SEL_SHIFT 30
-+#define CAL_SEL_SHIFT_2 28
-+
-+#define S0_P1_SHIFT 8
-+#define S1_P1_SHIFT 14
-+#define S2_P1_SHIFT 20
-+#define S3_P1_SHIFT 26
-+#define S5_P1_SHIFT 6
-+#define S6_P1_SHIFT 12
-+#define S7_P1_SHIFT 18
-+#define S8_P1_SHIFT 24
-+#define S9_P1_BKP_SHIFT 6
-+#define S10_P1_SHIFT 6
-+#define S10_P1_BKP_SHIFT 12
-+
-+#define BASE2_SHIFT 12
-+#define BASE2_BKP_SHIFT 18
-+#define S0_P2_SHIFT 20
-+#define S0_P2_BKP_SHIFT 26
-+#define S1_P2_SHIFT 26
-+#define S2_P2_BKP_SHIFT 6
-+#define S3_P2_SHIFT 6
-+#define S3_P2_BKP_SHIFT 12
-+#define S4_P2_SHIFT 12
-+#define S4_P2_BKP_SHIFT 18
-+#define S5_P2_SHIFT 18
-+#define S5_P2_BKP_SHIFT 24
-+#define S6_P2_SHIFT 24
-+#define S7_P2_BKP_SHIFT 6
-+#define S8_P2_SHIFT 6
-+#define S8_P2_BKP_SHIFT 12
-+#define S9_P2_SHIFT 12
-+#define S9_P2_BKP_SHIFT 18
-+#define S10_P2_SHIFT 18
-+#define S10_P2_BKP_SHIFT 24
-+
-+#define BASE2_MASK 0xff000
-+#define BASE2_BKP_MASK 0xfc0000
-+#define S0_P2_MASK 0x3f00000
-+#define S0_P2_BKP_MASK 0xfc000000
-+#define S1_P2_MASK 0xfc000000
-+#define S1_P2_BKP_MASK 0x3f
-+#define S2_P2_MASK 0x3f
-+#define S2_P2_BKP_MASK 0xfc0
-+#define S3_P2_MASK 0xfc0
-+#define S3_P2_BKP_MASK 0x3f000
-+#define S4_P2_MASK 0x3f000
-+#define S4_P2_BKP_MASK 0xfc0000
-+#define S5_P2_MASK 0xfc0000
-+#define S5_P2_BKP_MASK 0x3f000000
-+#define S6_P2_MASK 0x3f000000
-+#define S6_P2_BKP_MASK 0x3f
-+#define S7_P2_MASK 0x3f
-+#define S7_P2_BKP_MASK 0xfc0
-+#define S8_P2_MASK 0xfc0
-+#define S8_P2_BKP_MASK 0x3f000
-+#define S9_P2_MASK 0x3f000
-+#define S9_P2_BKP_MASK 0xfc0000
-+#define S10_P2_MASK 0xfc0000
-+#define S10_P2_BKP_MASK 0x3f000000
-+
-+#define BKP_SEL 0x3
-+#define BKP_REDUN_SEL 0xe0000000
-+#define BKP_REDUN_SHIFT 29
-+
-+#define BIT_APPEND 0x3
-+
-+static int calibrate_8974(struct tsens_device *tmdev)
-+{
-+ int base1 = 0, base2 = 0, i;
-+ u32 p1[11], p2[11];
-+ int mode = 0;
-+ u32 *calib, *bkp;
-+ u32 calib_redun_sel;
-+
-+ calib = (u32 *)qfprom_read(tmdev->dev, "calib");
-+ if (IS_ERR(calib))
-+ return PTR_ERR(calib);
-+
-+ bkp = (u32 *)qfprom_read(tmdev->dev, "calib_backup");
-+ if (IS_ERR(bkp))
-+ return PTR_ERR(bkp);
-+
-+ calib_redun_sel = bkp[1] & BKP_REDUN_SEL;
-+ calib_redun_sel >>= BKP_REDUN_SHIFT;
-+
-+ if (calib_redun_sel == BKP_SEL) {
-+ mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
-+ mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
-+
-+ switch (mode) {
-+ case TWO_PT_CALIB:
-+ base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT;
-+ p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT;
-+ p2[1] = (bkp[3] & S1_P2_BKP_MASK);
-+ p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT;
-+ p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT;
-+ p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT;
-+ p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT;
-+ p2[6] = (calib[5] & S6_P2_BKP_MASK);
-+ p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT;
-+ p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT;
-+ p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT;
-+ p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT;
-+ /* Fall through */
-+ case ONE_PT_CALIB:
-+ case ONE_PT_CALIB2:
-+ base1 = bkp[0] & BASE1_MASK;
-+ p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT;
-+ p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT;
-+ p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT;
-+ p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT;
-+ p1[4] = (bkp[1] & S4_P1_MASK);
-+ p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT;
-+ p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT;
-+ p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT;
-+ p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT;
-+ p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT;
-+ p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT;
-+ break;
-+ }
-+ } else {
-+ mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
-+ mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
-+
-+ switch (mode) {
-+ case TWO_PT_CALIB:
-+ base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT;
-+ p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT;
-+ p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT;
-+ p2[2] = (calib[3] & S2_P2_MASK);
-+ p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT;
-+ p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT;
-+ p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT;
-+ p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT;
-+ p2[7] = (calib[4] & S7_P2_MASK);
-+ p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT;
-+ p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT;
-+ p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT;
-+ /* Fall through */
-+ case ONE_PT_CALIB:
-+ case ONE_PT_CALIB2:
-+ base1 = calib[0] & BASE1_MASK;
-+ p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT;
-+ p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT;
-+ p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT;
-+ p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT;
-+ p1[4] = (calib[1] & S4_P1_MASK);
-+ p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT;
-+ p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT;
-+ p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT;
-+ p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT;
-+ p1[9] = (calib[2] & S9_P1_MASK);
-+ p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT;
-+ break;
-+ }
-+ }
-+
-+ switch (mode) {
-+ case ONE_PT_CALIB:
-+ for (i = 0; i < tmdev->num_sensors; i++)
-+ p1[i] += (base1 << 2) | BIT_APPEND;
-+ break;
-+ case TWO_PT_CALIB:
-+ for (i = 0; i < tmdev->num_sensors; i++) {
-+ p2[i] += base2;
-+ p2[i] <<= 2;
-+ p2[i] |= BIT_APPEND;
-+ }
-+ /* Fall through */
-+ case ONE_PT_CALIB2:
-+ for (i = 0; i < tmdev->num_sensors; i++) {
-+ p1[i] += base1;
-+ p1[i] <<= 2;
-+ p1[i] |= BIT_APPEND;
-+ }
-+ break;
-+ default:
-+ for (i = 0; i < tmdev->num_sensors; i++)
-+ p2[i] = 780;
-+ p1[0] = 502;
-+ p1[1] = 509;
-+ p1[2] = 503;
-+ p1[3] = 509;
-+ p1[4] = 505;
-+ p1[5] = 509;
-+ p1[6] = 507;
-+ p1[7] = 510;
-+ p1[8] = 508;
-+ p1[9] = 509;
-+ p1[10] = 508;
-+ break;
-+ }
-+
-+ compute_intercept_slope(tmdev, p1, p2, mode);
-+
-+ return 0;
-+}
-+
-+const struct tsens_ops ops_8974 = {
-+ .init = init_common,
-+ .calibrate = calibrate_8974,
-+ .get_temp = get_temp_common,
-+};
-+
-+const struct tsens_data data_8974 = {
-+ .num_sensors = 11,
-+ .ops = &ops_8974,
-+};
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -68,6 +68,7 @@ static const struct of_device_id tsens_t
- .data = &data_8916,
- }, {
- .compatible = "qcom,msm8974-tsens",
-+ .data = &data_8974,
- },
- {}
- };
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -87,6 +87,6 @@ void compute_intercept_slope(struct tsen
- int init_common(struct tsens_device *);
- int get_temp_common(struct tsens_device *, int, int *);
-
--extern const struct tsens_data data_8916;
-+extern const struct tsens_data data_8916, data_8974;
-
- #endif /* __QCOM_TSENS_H__ */
diff --git a/target/linux/ipq806x/patches-4.4/015-4-thermal-qcom-tsens-8960-Add-support-for-8960-family-of-SoCs.patch b/target/linux/ipq806x/patches-4.4/015-4-thermal-qcom-tsens-8960-Add-support-for-8960-family-of-SoCs.patch
deleted file mode 100644
index 05490cd97d..0000000000
--- a/target/linux/ipq806x/patches-4.4/015-4-thermal-qcom-tsens-8960-Add-support-for-8960-family-of-SoCs.patch
+++ /dev/null
@@ -1,364 +0,0 @@
-From 20d4fd84bf524ad91e2cc3e4ab4020c27cfc0081 Mon Sep 17 00:00:00 2001
-From: Rajendra Nayak <rnayak@codeaurora.org>
-Date: Thu, 5 May 2016 14:21:43 +0530
-Subject: thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
-
-8960 family of SoCs have the TSENS device as part of GCC, hence
-the driver probes the virtual child device created by GCC and
-uses the parent to extract all DT properties and reuses the GCC
-regmap.
-
-Also GCC/TSENS are part of a domain thats not always ON.
-Hence add .suspend and .resume hooks to save and restore some of
-the inited register context.
-
-Also 8960 family have some of the TSENS init sequence thats
-required to be done by the HLOS driver (some later versions of TSENS
-do not export these registers to non-secure world, and hence need
-these initializations to be done by secure bootloaders)
-
-8660 from the same family has just one sensor and hence some register
-offset/layout differences which need special handling in the driver.
-
-Based on the original code from Siddartha Mohanadoss, Stephen Boyd and
-Narendran Rajan.
-
-Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-Signed-off-by: Zhang Rui <rui.zhang@intel.com>
----
- drivers/thermal/qcom/Makefile | 2 +-
- drivers/thermal/qcom/tsens-8960.c | 292 ++++++++++++++++++++++++++++++++++++++
- drivers/thermal/qcom/tsens.c | 8 +-
- drivers/thermal/qcom/tsens.h | 2 +-
- 4 files changed, 298 insertions(+), 6 deletions(-)
- create mode 100644 drivers/thermal/qcom/tsens-8960.c
-
---- a/drivers/thermal/qcom/Makefile
-+++ b/drivers/thermal/qcom/Makefile
-@@ -1,2 +1,2 @@
- obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
--qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o
-+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o
---- /dev/null
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -0,0 +1,292 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/regmap.h>
-+#include <linux/thermal.h>
-+#include "tsens.h"
-+
-+#define CAL_MDEGC 30000
-+
-+#define CONFIG_ADDR 0x3640
-+#define CONFIG_ADDR_8660 0x3620
-+/* CONFIG_ADDR bitmasks */
-+#define CONFIG 0x9b
-+#define CONFIG_MASK 0xf
-+#define CONFIG_8660 1
-+#define CONFIG_SHIFT_8660 28
-+#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
-+
-+#define STATUS_CNTL_ADDR_8064 0x3660
-+#define CNTL_ADDR 0x3620
-+/* CNTL_ADDR bitmasks */
-+#define EN BIT(0)
-+#define SW_RST BIT(1)
-+#define SENSOR0_EN BIT(3)
-+#define SLP_CLK_ENA BIT(26)
-+#define SLP_CLK_ENA_8660 BIT(24)
-+#define MEASURE_PERIOD 1
-+#define SENSOR0_SHIFT 3
-+
-+/* INT_STATUS_ADDR bitmasks */
-+#define MIN_STATUS_MASK BIT(0)
-+#define LOWER_STATUS_CLR BIT(1)
-+#define UPPER_STATUS_CLR BIT(2)
-+#define MAX_STATUS_MASK BIT(3)
-+
-+#define THRESHOLD_ADDR 0x3624
-+/* THRESHOLD_ADDR bitmasks */
-+#define THRESHOLD_MAX_LIMIT_SHIFT 24
-+#define THRESHOLD_MIN_LIMIT_SHIFT 16
-+#define THRESHOLD_UPPER_LIMIT_SHIFT 8
-+#define THRESHOLD_LOWER_LIMIT_SHIFT 0
-+
-+/* Initial temperature threshold values */
-+#define LOWER_LIMIT_TH 0x50
-+#define UPPER_LIMIT_TH 0xdf
-+#define MIN_LIMIT_TH 0x0
-+#define MAX_LIMIT_TH 0xff
-+
-+#define S0_STATUS_ADDR 0x3628
-+#define INT_STATUS_ADDR 0x363c
-+#define TRDY_MASK BIT(7)
-+#define TIMEOUT_US 100
-+
-+static int suspend_8960(struct tsens_device *tmdev)
-+{
-+ int ret;
-+ unsigned int mask;
-+ struct regmap *map = tmdev->map;
-+
-+ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control);
-+ if (ret)
-+ return ret;
-+
-+ if (tmdev->num_sensors > 1)
-+ mask = SLP_CLK_ENA | EN;
-+ else
-+ mask = SLP_CLK_ENA_8660 | EN;
-+
-+ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int resume_8960(struct tsens_device *tmdev)
-+{
-+ int ret;
-+ struct regmap *map = tmdev->map;
-+
-+ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
-+ if (ret)
-+ return ret;
-+
-+ /*
-+ * Separate CONFIG restore is not needed only for 8660 as
-+ * config is part of CTRL Addr and its restored as such
-+ */
-+ if (tmdev->num_sensors > 1) {
-+ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int enable_8960(struct tsens_device *tmdev, int id)
-+{
-+ int ret;
-+ u32 reg, mask;
-+
-+ ret = regmap_read(tmdev->map, CNTL_ADDR, &reg);
-+ if (ret)
-+ return ret;
-+
-+ mask = BIT(id + SENSOR0_SHIFT);
-+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST);
-+ if (ret)
-+ return ret;
-+
-+ if (tmdev->num_sensors > 1)
-+ reg |= mask | SLP_CLK_ENA | EN;
-+ else
-+ reg |= mask | SLP_CLK_ENA_8660 | EN;
-+
-+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static void disable_8960(struct tsens_device *tmdev)
-+{
-+ int ret;
-+ u32 reg_cntl;
-+ u32 mask;
-+
-+ mask = GENMASK(tmdev->num_sensors - 1, 0);
-+ mask <<= SENSOR0_SHIFT;
-+ mask |= EN;
-+
-+ ret = regmap_read(tmdev->map, CNTL_ADDR, &reg_cntl);
-+ if (ret)
-+ return;
-+
-+ reg_cntl &= ~mask;
-+
-+ if (tmdev->num_sensors > 1)
-+ reg_cntl &= ~SLP_CLK_ENA;
-+ else
-+ reg_cntl &= ~SLP_CLK_ENA_8660;
-+
-+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
-+}
-+
-+static int init_8960(struct tsens_device *tmdev)
-+{
-+ int ret, i;
-+ u32 reg_cntl;
-+
-+ tmdev->map = dev_get_regmap(tmdev->dev, NULL);
-+ if (!tmdev->map)
-+ return -ENODEV;
-+
-+ /*
-+ * The status registers for each sensor are discontiguous
-+ * because some SoCs have 5 sensors while others have more
-+ * but the control registers stay in the same place, i.e
-+ * directly after the first 5 status registers.
-+ */
-+ for (i = 0; i < tmdev->num_sensors; i++) {
-+ if (i >= 5)
-+ tmdev->sensor[i].status = S0_STATUS_ADDR + 40;
-+ tmdev->sensor[i].status += i * 4;
-+ }
-+
-+ reg_cntl = SW_RST;
-+ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
-+ if (ret)
-+ return ret;
-+
-+ if (tmdev->num_sensors > 1) {
-+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
-+ reg_cntl &= ~SW_RST;
-+ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
-+ CONFIG_MASK, CONFIG);
-+ } else {
-+ reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
-+ reg_cntl &= ~CONFIG_MASK_8660;
-+ reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
-+ }
-+
-+ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
-+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
-+ if (ret)
-+ return ret;
-+
-+ reg_cntl |= EN;
-+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int calibrate_8960(struct tsens_device *tmdev)
-+{
-+ int i;
-+ char *data;
-+
-+ ssize_t num_read = tmdev->num_sensors;
-+ struct tsens_sensor *s = tmdev->sensor;
-+
-+ data = qfprom_read(tmdev->dev, "calib");
-+ if (IS_ERR(data))
-+ data = qfprom_read(tmdev->dev, "calib_backup");
-+ if (IS_ERR(data))
-+ return PTR_ERR(data);
-+
-+ for (i = 0; i < num_read; i++, s++)
-+ s->offset = data[i];
-+
-+ return 0;
-+}
-+
-+/* Temperature on y axis and ADC-code on x-axis */
-+static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
-+{
-+ int slope, offset;
-+
-+ slope = thermal_zone_get_slope(s->tzd);
-+ offset = CAL_MDEGC - slope * s->offset;
-+
-+ return adc_code * slope + offset;
-+}
-+
-+static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp)
-+{
-+ int ret;
-+ u32 code, trdy;
-+ const struct tsens_sensor *s = &tmdev->sensor[id];
-+ unsigned long timeout;
-+
-+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
-+ do {
-+ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
-+ if (ret)
-+ return ret;
-+ if (!(trdy & TRDY_MASK))
-+ continue;
-+ ret = regmap_read(tmdev->map, s->status, &code);
-+ if (ret)
-+ return ret;
-+ *temp = code_to_mdegC(code, s);
-+ return 0;
-+ } while (time_before(jiffies, timeout));
-+
-+ return -ETIMEDOUT;
-+}
-+
-+const struct tsens_ops ops_8960 = {
-+ .init = init_8960,
-+ .calibrate = calibrate_8960,
-+ .get_temp = get_temp_8960,
-+ .enable = enable_8960,
-+ .disable = disable_8960,
-+ .suspend = suspend_8960,
-+ .resume = resume_8960,
-+};
-+
-+const struct tsens_data data_8960 = {
-+ .num_sensors = 11,
-+ .ops = &ops_8960,
-+};
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -122,10 +122,10 @@ static int tsens_probe(struct platform_d
- np = dev->of_node;
-
- id = of_match_node(tsens_table, np);
-- if (!id)
-- return -EINVAL;
--
-- data = id->data;
-+ if (id)
-+ data = id->data;
-+ else
-+ data = &data_8960;
-
- if (data->num_sensors <= 0) {
- dev_err(dev, "invalid number of sensors\n");
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -87,6 +87,6 @@ void compute_intercept_slope(struct tsen
- int init_common(struct tsens_device *);
- int get_temp_common(struct tsens_device *, int, int *);
-
--extern const struct tsens_data data_8916, data_8974;
-+extern const struct tsens_data data_8916, data_8974, data_8960;
-
- #endif /* __QCOM_TSENS_H__ */
diff --git a/target/linux/ipq806x/patches-4.4/015-8-qcom-tsens-8916-mark-PM-functions-__maybe_unused.patch b/target/linux/ipq806x/patches-4.4/015-8-qcom-tsens-8916-mark-PM-functions-__maybe_unused.patch
deleted file mode 100644
index 39d2173fe9..0000000000
--- a/target/linux/ipq806x/patches-4.4/015-8-qcom-tsens-8916-mark-PM-functions-__maybe_unused.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 5b97469a55872a30a0d53a1279a8ae8b1c68b52c Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Mon, 4 Jul 2016 15:12:28 +0200
-Subject: thermal: qcom: tsens-8916: mark PM functions __maybe_unused
-
-The newly added tsens-8916 driver produces warnings when CONFIG_PM
-is disabled:
-
-drivers/thermal/qcom/tsens.c:53:12: error: 'tsens_resume' defined but not used [-Werror=unused-function]
- static int tsens_resume(struct device *dev)
- ^~~~~~~~~~~~
-drivers/thermal/qcom/tsens.c:43:12: error: 'tsens_suspend' defined but not used [-Werror=unused-function]
- static int tsens_suspend(struct device *dev)
- ^~~~~~~~~~~~~
-
-This marks both functions __maybe_unused to let the compiler
-know that they might be used in other configurations, without
-adding ugly #ifdef logic.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
-Signed-off-by: Zhang Rui <rui.zhang@intel.com>
----
- drivers/thermal/qcom/tsens.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -40,7 +40,7 @@ static int tsens_get_trend(void *data, l
- return -ENOTSUPP;
- }
-
--static int tsens_suspend(struct device *dev)
-+static int __maybe_unused tsens_suspend(struct device *dev)
- {
- struct tsens_device *tmdev = dev_get_drvdata(dev);
-
-@@ -50,7 +50,7 @@ static int tsens_suspend(struct device *
- return 0;
- }
-
--static int tsens_resume(struct device *dev)
-+static int __maybe_unused tsens_resume(struct device *dev)
- {
- struct tsens_device *tmdev = dev_get_drvdata(dev);
-
diff --git a/target/linux/ipq806x/patches-4.4/016-2-thermal-of-thermal-Add-devm-version-of.patch b/target/linux/ipq806x/patches-4.4/016-2-thermal-of-thermal-Add-devm-version-of.patch
deleted file mode 100644
index 1ca7326832..0000000000
--- a/target/linux/ipq806x/patches-4.4/016-2-thermal-of-thermal-Add-devm-version-of.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From e498b4984db82b4ba3ceea7dba813222a31e9c2e Mon Sep 17 00:00:00 2001
-From: Laxman Dewangan <ldewangan@nvidia.com>
-Date: Wed, 9 Mar 2016 18:40:06 +0530
-Subject: thermal: of-thermal: Add devm version of
- thermal_zone_of_sensor_register
-
-Add resource managed version of thermal_zone_of_sensor_register() and
-thermal_zone_of_sensor_unregister().
-
-This helps in reducing the code size in error path, remove of
-driver remove callbacks and making proper sequence for deallocations.
-
-Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
----
- drivers/thermal/of-thermal.c | 81 ++++++++++++++++++++++++++++++++++++++++++++
- include/linux/thermal.h | 18 ++++++++++
- 2 files changed, 99 insertions(+)
-
---- a/drivers/thermal/of-thermal.c
-+++ b/drivers/thermal/of-thermal.c
-@@ -559,6 +559,87 @@ void thermal_zone_of_sensor_unregister(s
- }
- EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister);
-
-+static void devm_thermal_zone_of_sensor_release(struct device *dev, void *res)
-+{
-+ thermal_zone_of_sensor_unregister(dev,
-+ *(struct thermal_zone_device **)res);
-+}
-+
-+static int devm_thermal_zone_of_sensor_match(struct device *dev, void *res,
-+ void *data)
-+{
-+ struct thermal_zone_device **r = res;
-+
-+ if (WARN_ON(!r || !*r))
-+ return 0;
-+
-+ return *r == data;
-+}
-+
-+/**
-+ * devm_thermal_zone_of_sensor_register - Resource managed version of
-+ * thermal_zone_of_sensor_register()
-+ * @dev: a valid struct device pointer of a sensor device. Must contain
-+ * a valid .of_node, for the sensor node.
-+ * @sensor_id: a sensor identifier, in case the sensor IP has more
-+ * than one sensors
-+ * @data: a private pointer (owned by the caller) that will be passed
-+ * back, when a temperature reading is needed.
-+ * @ops: struct thermal_zone_of_device_ops *. Must contain at least .get_temp.
-+ *
-+ * Refer thermal_zone_of_sensor_register() for more details.
-+ *
-+ * Return: On success returns a valid struct thermal_zone_device,
-+ * otherwise, it returns a corresponding ERR_PTR(). Caller must
-+ * check the return value with help of IS_ERR() helper.
-+ * Registered hermal_zone_device device will automatically be
-+ * released when device is unbounded.
-+ */
-+struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
-+ struct device *dev, int sensor_id,
-+ void *data, const struct thermal_zone_of_device_ops *ops)
-+{
-+ struct thermal_zone_device **ptr, *tzd;
-+
-+ ptr = devres_alloc(devm_thermal_zone_of_sensor_release, sizeof(*ptr),
-+ GFP_KERNEL);
-+ if (!ptr)
-+ return ERR_PTR(-ENOMEM);
-+
-+ tzd = thermal_zone_of_sensor_register(dev, sensor_id, data, ops);
-+ if (IS_ERR(tzd)) {
-+ devres_free(ptr);
-+ return tzd;
-+ }
-+
-+ *ptr = tzd;
-+ devres_add(dev, ptr);
-+
-+ return tzd;
-+}
-+EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_register);
-+
-+/**
-+ * devm_thermal_zone_of_sensor_unregister - Resource managed version of
-+ * thermal_zone_of_sensor_unregister().
-+ * @dev: Device for which which resource was allocated.
-+ * @tzd: a pointer to struct thermal_zone_device where the sensor is registered.
-+ *
-+ * This function removes the sensor callbacks and private data from the
-+ * thermal zone device registered with devm_thermal_zone_of_sensor_register()
-+ * API. It will also silent the zone by remove the .get_temp() and .get_trend()
-+ * thermal zone device callbacks.
-+ * Normally this function will not need to be called and the resource
-+ * management code will ensure that the resource is freed.
-+ */
-+void devm_thermal_zone_of_sensor_unregister(struct device *dev,
-+ struct thermal_zone_device *tzd)
-+{
-+ WARN_ON(devres_release(dev, devm_thermal_zone_of_sensor_release,
-+ devm_thermal_zone_of_sensor_match, tzd));
-+}
-+EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_unregister);
-+
- /*** functions parsing device tree nodes ***/
-
- /**
---- a/include/linux/thermal.h
-+++ b/include/linux/thermal.h
-@@ -364,6 +364,11 @@ thermal_zone_of_sensor_register(struct d
- const struct thermal_zone_of_device_ops *ops);
- void thermal_zone_of_sensor_unregister(struct device *dev,
- struct thermal_zone_device *tz);
-+struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
-+ struct device *dev, int id, void *data,
-+ const struct thermal_zone_of_device_ops *ops);
-+void devm_thermal_zone_of_sensor_unregister(struct device *dev,
-+ struct thermal_zone_device *tz);
- #else
- static inline struct thermal_zone_device *
- thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
-@@ -378,6 +383,19 @@ void thermal_zone_of_sensor_unregister(s
- {
- }
-
-+static inline struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
-+ struct device *dev, int id, void *data,
-+ const struct thermal_zone_of_device_ops *ops)
-+{
-+ return ERR_PTR(-ENODEV);
-+}
-+
-+static inline
-+void devm_thermal_zone_of_sensor_unregister(struct device *dev,
-+ struct thermal_zone_device *tz)
-+{
-+}
-+
- #endif
-
- #if IS_ENABLED(CONFIG_THERMAL)
diff --git a/target/linux/ipq806x/patches-4.4/017-09-thermal-core-export-apis-to-get-slope-and-offset.patch b/target/linux/ipq806x/patches-4.4/017-09-thermal-core-export-apis-to-get-slope-and-offset.patch
deleted file mode 100644
index 3fbe5f521a..0000000000
--- a/target/linux/ipq806x/patches-4.4/017-09-thermal-core-export-apis-to-get-slope-and-offset.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 4a7069a32c99a81950de035535b0a064dcceaeba Mon Sep 17 00:00:00 2001
-From: Rajendra Nayak <rnayak@codeaurora.org>
-Date: Thu, 5 May 2016 14:21:42 +0530
-Subject: [PATCH] thermal: core: export apis to get slope and offset
-
-Add apis for platform thermal drivers to query for slope and offset
-attributes, which might be needed for temperature calculations.
-
-Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
-Signed-off-by: Zhang Rui <rui.zhang@intel.com>
----
- Documentation/thermal/sysfs-api.txt | 12 ++++++++++++
- drivers/thermal/thermal_core.c | 30 ++++++++++++++++++++++++++++++
- include/linux/thermal.h | 8 ++++++++
- 3 files changed, 50 insertions(+)
-
---- a/Documentation/thermal/sysfs-api.txt
-+++ b/Documentation/thermal/sysfs-api.txt
-@@ -72,6 +72,18 @@ temperature) and throttle appropriate de
- It deletes the corresponding entry form /sys/class/thermal folder and
- unbind all the thermal cooling devices it uses.
-
-+1.1.7 int thermal_zone_get_slope(struct thermal_zone_device *tz)
-+
-+ This interface is used to read the slope attribute value
-+ for the thermal zone device, which might be useful for platform
-+ drivers for temperature calculations.
-+
-+1.1.8 int thermal_zone_get_offset(struct thermal_zone_device *tz)
-+
-+ This interface is used to read the offset attribute value
-+ for the thermal zone device, which might be useful for platform
-+ drivers for temperature calculations.
-+
- 1.2 thermal cooling device interface
- 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
- void *devdata, struct thermal_cooling_device_ops *)
---- a/drivers/thermal/thermal_core.c
-+++ b/drivers/thermal/thermal_core.c
-@@ -2061,6 +2061,36 @@ exit:
- }
- EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name);
-
-+/**
-+ * thermal_zone_get_slope - return the slope attribute of the thermal zone
-+ * @tz: thermal zone device with the slope attribute
-+ *
-+ * Return: If the thermal zone device has a slope attribute, return it, else
-+ * return 1.
-+ */
-+int thermal_zone_get_slope(struct thermal_zone_device *tz)
-+{
-+ if (tz && tz->tzp)
-+ return tz->tzp->slope;
-+ return 1;
-+}
-+EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
-+
-+/**
-+ * thermal_zone_get_offset - return the offset attribute of the thermal zone
-+ * @tz: thermal zone device with the offset attribute
-+ *
-+ * Return: If the thermal zone device has a offset attribute, return it, else
-+ * return 0.
-+ */
-+int thermal_zone_get_offset(struct thermal_zone_device *tz)
-+{
-+ if (tz && tz->tzp)
-+ return tz->tzp->offset;
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(thermal_zone_get_offset);
-+
- #ifdef CONFIG_NET
- static const struct genl_multicast_group thermal_event_mcgrps[] = {
- { .name = THERMAL_GENL_MCAST_GROUP_NAME, },
---- a/include/linux/thermal.h
-+++ b/include/linux/thermal.h
-@@ -432,6 +432,8 @@ thermal_of_cooling_device_register(struc
- void thermal_cooling_device_unregister(struct thermal_cooling_device *);
- struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name);
- int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
-+int thermal_zone_get_slope(struct thermal_zone_device *tz);
-+int thermal_zone_get_offset(struct thermal_zone_device *tz);
-
- int get_tz_trend(struct thermal_zone_device *, int);
- struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
-@@ -489,6 +491,12 @@ static inline struct thermal_zone_device
- static inline int thermal_zone_get_temp(
- struct thermal_zone_device *tz, int *temp)
- { return -ENODEV; }
-+static inline int thermal_zone_get_slope(
-+ struct thermal_zone_device *tz)
-+{ return -ENODEV; }
-+static inline int thermal_zone_get_offset(
-+ struct thermal_zone_device *tz)
-+{ return -ENODEV; }
- static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
- { return -ENODEV; }
- static inline struct thermal_instance *
diff --git a/target/linux/ipq806x/patches-4.4/019-1-nvmem-core-return-error-for-non-word-aligned-access.patch b/target/linux/ipq806x/patches-4.4/019-1-nvmem-core-return-error-for-non-word-aligned-access.patch
deleted file mode 100644
index 13415f51d0..0000000000
--- a/target/linux/ipq806x/patches-4.4/019-1-nvmem-core-return-error-for-non-word-aligned-access.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 313a72ff983cc2e00ac4dcb791d40ebf2f9d5718 Mon Sep 17 00:00:00 2001
-From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Date: Tue, 17 Nov 2015 09:12:41 +0000
-Subject: nvmem: core: return error for non word aligned access
-
-nvmem providers have restrictions on register strides, so return error
-when users attempt to read/write buffers with sizes which are less
-than word size.
-
-Without this patch the userspace would continue to try as it does not
-get any error from the nvmem core, resulting in a hang or endless loop
-in userspace.
-
-Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -70,6 +70,9 @@ static ssize_t bin_attr_nvmem_read(struc
- if (pos >= nvmem->size)
- return 0;
-
-+ if (count < nvmem->word_size)
-+ return -EINVAL;
-+
- if (pos + count > nvmem->size)
- count = nvmem->size - pos;
-
-@@ -95,6 +98,9 @@ static ssize_t bin_attr_nvmem_write(stru
- if (pos >= nvmem->size)
- return 0;
-
-+ if (count < nvmem->word_size)
-+ return -EINVAL;
-+
- if (pos + count > nvmem->size)
- count = nvmem->size - pos;
-
diff --git a/target/linux/ipq806x/patches-4.4/019-2-nvmem-core-fix-error-path-in-nvmem_add_cells.patch b/target/linux/ipq806x/patches-4.4/019-2-nvmem-core-fix-error-path-in-nvmem_add_cells.patch
deleted file mode 100644
index 1f9473bafd..0000000000
--- a/target/linux/ipq806x/patches-4.4/019-2-nvmem-core-fix-error-path-in-nvmem_add_cells.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From dfdf141429f0895b63c882facc42c86f225033cb Mon Sep 17 00:00:00 2001
-From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
-Date: Mon, 8 Feb 2016 22:04:29 +0100
-Subject: nvmem: core: fix error path in nvmem_add_cells()
-
-The current code fails to nvmem_cell_drop(cells[0]) - even worse, if
-the loop above fails already at i==0, we'll enter an essentially
-infinite loop doing nvmem_cell_drop on cells[-1], cells[-2], ... which
-is unlikely to end well.
-
-Also, we're not freeing the temporary backing array cells on the error
-path.
-
-Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -294,9 +294,11 @@ static int nvmem_add_cells(struct nvmem_
-
- return 0;
- err:
-- while (--i)
-+ while (i--)
- nvmem_cell_drop(cells[i]);
-
-+ kfree(cells);
-+
- return rval;
- }
-
diff --git a/target/linux/ipq806x/patches-4.4/019-3-nvmem-Add-flag-to-export-NVMEM-to-root-only.patch b/target/linux/ipq806x/patches-4.4/019-3-nvmem-Add-flag-to-export-NVMEM-to-root-only.patch
deleted file mode 100644
index 77136eab72..0000000000
--- a/target/linux/ipq806x/patches-4.4/019-3-nvmem-Add-flag-to-export-NVMEM-to-root-only.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 811b0d6538b9f26f3eb0f90fe4e6118f2480ec6f Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Fri, 26 Feb 2016 20:59:18 +0100
-Subject: nvmem: Add flag to export NVMEM to root only
-
-Legacy AT24, AT25 EEPROMs are exported in sys so that only root can
-read the contents. The EEPROMs may contain sensitive information. Add
-a flag so the provide can indicate that NVMEM should also restrict
-access to root only.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 57 ++++++++++++++++++++++++++++++++++++++++--
- include/linux/nvmem-provider.h | 1 +
- 2 files changed, 56 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -161,6 +161,53 @@ static const struct attribute_group *nvm
- NULL,
- };
-
-+/* default read/write permissions, root only */
-+static struct bin_attribute bin_attr_rw_root_nvmem = {
-+ .attr = {
-+ .name = "nvmem",
-+ .mode = S_IWUSR | S_IRUSR,
-+ },
-+ .read = bin_attr_nvmem_read,
-+ .write = bin_attr_nvmem_write,
-+};
-+
-+static struct bin_attribute *nvmem_bin_rw_root_attributes[] = {
-+ &bin_attr_rw_root_nvmem,
-+ NULL,
-+};
-+
-+static const struct attribute_group nvmem_bin_rw_root_group = {
-+ .bin_attrs = nvmem_bin_rw_root_attributes,
-+};
-+
-+static const struct attribute_group *nvmem_rw_root_dev_groups[] = {
-+ &nvmem_bin_rw_root_group,
-+ NULL,
-+};
-+
-+/* read only permission, root only */
-+static struct bin_attribute bin_attr_ro_root_nvmem = {
-+ .attr = {
-+ .name = "nvmem",
-+ .mode = S_IRUSR,
-+ },
-+ .read = bin_attr_nvmem_read,
-+};
-+
-+static struct bin_attribute *nvmem_bin_ro_root_attributes[] = {
-+ &bin_attr_ro_root_nvmem,
-+ NULL,
-+};
-+
-+static const struct attribute_group nvmem_bin_ro_root_group = {
-+ .bin_attrs = nvmem_bin_ro_root_attributes,
-+};
-+
-+static const struct attribute_group *nvmem_ro_root_dev_groups[] = {
-+ &nvmem_bin_ro_root_group,
-+ NULL,
-+};
-+
- static void nvmem_release(struct device *dev)
- {
- struct nvmem_device *nvmem = to_nvmem_device(dev);
-@@ -355,8 +402,14 @@ struct nvmem_device *nvmem_register(cons
- nvmem->read_only = of_property_read_bool(np, "read-only") |
- config->read_only;
-
-- nvmem->dev.groups = nvmem->read_only ? nvmem_ro_dev_groups :
-- nvmem_rw_dev_groups;
-+ if (config->root_only)
-+ nvmem->dev.groups = nvmem->read_only ?
-+ nvmem_ro_root_dev_groups :
-+ nvmem_rw_root_dev_groups;
-+ else
-+ nvmem->dev.groups = nvmem->read_only ?
-+ nvmem_ro_dev_groups :
-+ nvmem_rw_dev_groups;
-
- device_initialize(&nvmem->dev);
-
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -23,6 +23,7 @@ struct nvmem_config {
- const struct nvmem_cell_info *cells;
- int ncells;
- bool read_only;
-+ bool root_only;
- };
-
- #if IS_ENABLED(CONFIG_NVMEM)
diff --git a/target/linux/ipq806x/patches-4.4/019-4-nvmem-Add-backwards-compatibility-support-for-older-EEPROM-drivers.patch b/target/linux/ipq806x/patches-4.4/019-4-nvmem-Add-backwards-compatibility-support-for-older-EEPROM-drivers.patch
deleted file mode 100644
index 6344d0ed03..0000000000
--- a/target/linux/ipq806x/patches-4.4/019-4-nvmem-Add-backwards-compatibility-support-for-older-EEPROM-drivers.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-From b6c217ab9be6895384cf0b284ace84ad79e5c53b Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Fri, 26 Feb 2016 20:59:19 +0100
-Subject: nvmem: Add backwards compatibility support for older EEPROM drivers.
-
-Older drivers made an 'eeprom' file available in the /sys device
-directory. Have the NVMEM core provide this to retain backwards
-compatibility.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 84 ++++++++++++++++++++++++++++++++++++++----
- include/linux/nvmem-provider.h | 4 +-
- 2 files changed, 79 insertions(+), 9 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -38,8 +38,13 @@ struct nvmem_device {
- int users;
- size_t size;
- bool read_only;
-+ int flags;
-+ struct bin_attribute eeprom;
-+ struct device *base_dev;
- };
-
-+#define FLAG_COMPAT BIT(0)
-+
- struct nvmem_cell {
- const char *name;
- int offset;
-@@ -56,16 +61,26 @@ static DEFINE_IDA(nvmem_ida);
- static LIST_HEAD(nvmem_cells);
- static DEFINE_MUTEX(nvmem_cells_mutex);
-
-+#ifdef CONFIG_DEBUG_LOCK_ALLOC
-+static struct lock_class_key eeprom_lock_key;
-+#endif
-+
- #define to_nvmem_device(d) container_of(d, struct nvmem_device, dev)
-
- static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t pos, size_t count)
- {
-- struct device *dev = container_of(kobj, struct device, kobj);
-- struct nvmem_device *nvmem = to_nvmem_device(dev);
-+ struct device *dev;
-+ struct nvmem_device *nvmem;
- int rc;
-
-+ if (attr->private)
-+ dev = attr->private;
-+ else
-+ dev = container_of(kobj, struct device, kobj);
-+ nvmem = to_nvmem_device(dev);
-+
- /* Stop the user from reading */
- if (pos >= nvmem->size)
- return 0;
-@@ -90,10 +105,16 @@ static ssize_t bin_attr_nvmem_write(stru
- struct bin_attribute *attr,
- char *buf, loff_t pos, size_t count)
- {
-- struct device *dev = container_of(kobj, struct device, kobj);
-- struct nvmem_device *nvmem = to_nvmem_device(dev);
-+ struct device *dev;
-+ struct nvmem_device *nvmem;
- int rc;
-
-+ if (attr->private)
-+ dev = attr->private;
-+ else
-+ dev = container_of(kobj, struct device, kobj);
-+ nvmem = to_nvmem_device(dev);
-+
- /* Stop the user from writing */
- if (pos >= nvmem->size)
- return 0;
-@@ -349,6 +370,43 @@ err:
- return rval;
- }
-
-+/*
-+ * nvmem_setup_compat() - Create an additional binary entry in
-+ * drivers sys directory, to be backwards compatible with the older
-+ * drivers/misc/eeprom drivers.
-+ */
-+static int nvmem_setup_compat(struct nvmem_device *nvmem,
-+ const struct nvmem_config *config)
-+{
-+ int rval;
-+
-+ if (!config->base_dev)
-+ return -EINVAL;
-+
-+ if (nvmem->read_only)
-+ nvmem->eeprom = bin_attr_ro_root_nvmem;
-+ else
-+ nvmem->eeprom = bin_attr_rw_root_nvmem;
-+ nvmem->eeprom.attr.name = "eeprom";
-+ nvmem->eeprom.size = nvmem->size;
-+#ifdef CONFIG_DEBUG_LOCK_ALLOC
-+ nvmem->eeprom.attr.key = &eeprom_lock_key;
-+#endif
-+ nvmem->eeprom.private = &nvmem->dev;
-+ nvmem->base_dev = config->base_dev;
-+
-+ rval = device_create_bin_file(nvmem->base_dev, &nvmem->eeprom);
-+ if (rval) {
-+ dev_err(&nvmem->dev,
-+ "Failed to create eeprom binary file %d\n", rval);
-+ return rval;
-+ }
-+
-+ nvmem->flags |= FLAG_COMPAT;
-+
-+ return 0;
-+}
-+
- /**
- * nvmem_register() - Register a nvmem device for given nvmem_config.
- * Also creates an binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
-@@ -416,16 +474,23 @@ struct nvmem_device *nvmem_register(cons
- dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
-
- rval = device_add(&nvmem->dev);
-- if (rval) {
-- ida_simple_remove(&nvmem_ida, nvmem->id);
-- kfree(nvmem);
-- return ERR_PTR(rval);
-+ if (rval)
-+ goto out;
-+
-+ if (config->compat) {
-+ rval = nvmem_setup_compat(nvmem, config);
-+ if (rval)
-+ goto out;
- }
-
- if (config->cells)
- nvmem_add_cells(nvmem, config);
-
- return nvmem;
-+out:
-+ ida_simple_remove(&nvmem_ida, nvmem->id);
-+ kfree(nvmem);
-+ return ERR_PTR(rval);
- }
- EXPORT_SYMBOL_GPL(nvmem_register);
-
-@@ -445,6 +510,9 @@ int nvmem_unregister(struct nvmem_device
- }
- mutex_unlock(&nvmem_mutex);
-
-+ if (nvmem->flags & FLAG_COMPAT)
-+ device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
-+
- nvmem_device_remove_all_cells(nvmem);
- device_del(&nvmem->dev);
-
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -24,6 +24,9 @@ struct nvmem_config {
- int ncells;
- bool read_only;
- bool root_only;
-+ /* To be only used by old driver/misc/eeprom drivers */
-+ bool compat;
-+ struct device *base_dev;
- };
-
- #if IS_ENABLED(CONFIG_NVMEM)
-@@ -44,5 +47,4 @@ static inline int nvmem_unregister(struc
- }
-
- #endif /* CONFIG_NVMEM */
--
- #endif /* ifndef _LINUX_NVMEM_PROVIDER_H */
diff --git a/target/linux/ipq806x/patches-4.4/020-add-ap148-bootargs.patch b/target/linux/ipq806x/patches-4.4/020-add-ap148-bootargs.patch
deleted file mode 100644
index 9c33bad5c1..0000000000
--- a/target/linux/ipq806x/patches-4.4/020-add-ap148-bootargs.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -4,14 +4,6 @@
- model = "Qualcomm IPQ8064/AP148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-- aliases {
-- serial0 = &gsbi4_serial;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
-@@ -22,6 +14,14 @@
- };
- };
-
-+ alias {
-+ serial0 = &uart4;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
- soc {
- pinmux@800000 {
- i2c4_pins: i2c4_pinmux {
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -159,7 +159,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- serial@12490000 {
-+ uart2: serial@12490000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x12490000 0x1000>,
- <0x12480000 0x1000>;
-@@ -197,7 +197,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- gsbi4_serial: serial@16340000 {
-+ uart4: serial@16340000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16340000 0x1000>,
- <0x16300000 0x1000>;
-@@ -234,7 +234,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- serial@1a240000 {
-+ uart5: serial@1a240000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x1a240000 0x1000>,
- <0x1a200000 0x1000>;
diff --git a/target/linux/ipq806x/patches-4.4/021-add-ap148-partitions.patch b/target/linux/ipq806x/patches-4.4/021-add-ap148-partitions.patch
deleted file mode 100644
index bfdb30fe14..0000000000
--- a/target/linux/ipq806x/patches-4.4/021-add-ap148-partitions.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -77,15 +77,7 @@
- spi-max-frequency = <50000000>;
- reg = <0>;
-
-- partition@0 {
-- label = "rootfs";
-- reg = <0x0 0x1000000>;
-- };
--
-- partition@1 {
-- label = "scratch";
-- reg = <0x1000000 0x1000000>;
-- };
-+ linux,part-probe = "qcom-smem";
- };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.4/022-add-db149-dts.patch b/target/linux/ipq806x/patches-4.4/022-add-db149-dts.patch
deleted file mode 100644
index 0845d3f213..0000000000
--- a/target/linux/ipq806x/patches-4.4/022-add-db149-dts.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From f26cc3733bdd697bd81ae505fc133fa7c9b6ea19 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Tue, 7 Apr 2015 19:58:58 -0700
-Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
-
-Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
-SATA, USB2, USB3 and NOR flash.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/qcom-ipq8064-db149.dts | 132 +++++++++++++++++++++++++++++++
- 2 files changed, 133 insertions(+)
- create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -506,6 +506,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8084-ifc6540.dtb \
- qcom-apq8084-mtp.dtb \
- qcom-ipq8064-ap148.dtb \
-+ qcom-ipq8064-db149.dtb \
- qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-msm8974-sony-xperia-honami.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -0,0 +1,132 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+/ {
-+ model = "Qualcomm IPQ8064/DB149";
-+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ alias {
-+ serial0 = &uart2;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ i2c4_pins: i2c4_pinmux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ bias-disable;
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ drive-strength = <10>;
-+ bias-none;
-+ };
-+ };
-+ };
-+
-+ gsbi2: gsbi@12480000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ uart2: serial@12490000 {
-+ status = "ok";
-+ };
-+ };
-+
-+ gsbi5: gsbi@1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi4: spi@1a280000 {
-+ status = "ok";
-+ spi-max-frequency = <50000000>;
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 0>;
-+
-+ flash: m25p80@0 {
-+ compatible = "s25fl256s1";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+ m25p,fast-read;
-+
-+ partition@0 {
-+ label = "lowlevel_init";
-+ reg = <0x0 0x1b0000>;
-+ };
-+
-+ partition@1 {
-+ label = "u-boot";
-+ reg = <0x1b0000 0x80000>;
-+ };
-+
-+ partition@2 {
-+ label = "u-boot-env";
-+ reg = <0x230000 0x40000>;
-+ };
-+
-+ partition@3 {
-+ label = "caldata";
-+ reg = <0x270000 0x40000>;
-+ };
-+
-+ partition@4 {
-+ label = "firmware";
-+ reg = <0x2b0000 0x1d50000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ sata-phy@1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata@29000000 {
-+ status = "ok";
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+ };
-+ };
-+};
diff --git a/target/linux/ipq806x/patches-4.4/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-4.4/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
deleted file mode 100644
index 705306d9f0..0000000000
--- a/target/linux/ipq806x/patches-4.4/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -47,14 +47,12 @@
- status = "ok";
- };
-
-- i2c4: i2c@16380000 {
-- status = "ok";
--
-- clock-frequency = <200000>;
--
-- pinctrl-0 = <&i2c4_pins>;
-- pinctrl-names = "default";
-- };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
- };
-
- gsbi5: gsbi@1a200000 {
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
- .parent_names = gcc_pxo_pll8,
- .num_parents = 2,
- .ops = &clk_rcg_ops,
-- .flags = CLK_SET_PARENT_GATE,
-+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
- },
- },
- };
-@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
- },
- .num_parents = 1,
- .ops = &clk_branch_ops,
-- .flags = CLK_SET_RATE_PARENT,
-+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
- },
- },
- };
-@@ -890,7 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
- .hw.init = &(struct clk_init_data){
- .name = "gsbi1_h_clk",
- .ops = &clk_branch_ops,
-- .flags = CLK_IS_ROOT,
-+ .flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,
- },
- },
- };
diff --git a/target/linux/ipq806x/patches-4.4/024-ap148-add-memory-node.patch b/target/linux/ipq806x/patches-4.4/024-ap148-add-memory-node.patch
deleted file mode 100644
index f026ed9394..0000000000
--- a/target/linux/ipq806x/patches-4.4/024-ap148-add-memory-node.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -4,6 +4,11 @@
- model = "Qualcomm IPQ8064/AP148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
diff --git a/target/linux/ipq806x/patches-4.4/030-ARM-qcom-select-ARM_CPU_SUSPEND-for-power-management.patch b/target/linux/ipq806x/patches-4.4/030-ARM-qcom-select-ARM_CPU_SUSPEND-for-power-management.patch
deleted file mode 100644
index cb2d303973..0000000000
--- a/target/linux/ipq806x/patches-4.4/030-ARM-qcom-select-ARM_CPU_SUSPEND-for-power-management.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 24 Nov 2015 23:13:09 +0100
-Subject: [PATCH] ARM: qcom: select ARM_CPU_SUSPEND for power management
-
-The qcom spm driver uses cpu_resume_arm(), which is not included
-in the kernel in all configurations:
-
-drivers/built-in.o: In function `qcom_cpu_spc':
-:(.text+0xbc022): undefined reference to `cpu_suspend'
-drivers/built-in.o: In function `qcom_cpuidle_init':
-:(.init.text+0x610c): undefined reference to `cpu_resume_arm'
-
-This adds a 'select' Kconfig statement to ensure it's always
-enabled.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
-
---- a/drivers/soc/qcom/Kconfig
-+++ b/drivers/soc/qcom/Kconfig
-@@ -13,6 +13,7 @@ config QCOM_GSBI
- config QCOM_PM
- bool "Qualcomm Power Management"
- depends on ARCH_QCOM && !ARM64
-+ select ARM_CPU_SUSPEND
- select QCOM_SCM
- help
- QCOM Platform specific power driver to manage cores and L2 low power
diff --git a/target/linux/ipq806x/patches-4.4/033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch b/target/linux/ipq806x/patches-4.4/033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch
deleted file mode 100644
index e1d317de47..0000000000
--- a/target/linux/ipq806x/patches-4.4/033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From c7c482da19a5e4ba7101198c21c2434056b0b2da Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Thu, 13 Aug 2015 09:45:26 -0700
-Subject: [PATCH 1/3] ARM: qcom: add SFPB nodes to IPQ806x dts
-
-Add one new node to the ipq806x.dtsi file to declare & register the
-hardware spinlock devices. This mechanism is required to be used by
-other drivers such as SMEM.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -329,5 +329,16 @@
- #reset-cells = <1>;
- };
-
-+ sfpb_mutex_block: syscon@1200600 {
-+ compatible = "syscon";
-+ reg = <0x01200600 0x100>;
-+ };
-+ };
-+
-+ sfpb_mutex: sfpb-mutex {
-+ compatible = "qcom,sfpb-mutex";
-+ syscon = <&sfpb_mutex_block 4 4>;
-+
-+ #hwlock-cells = <1>;
- };
- };
diff --git a/target/linux/ipq806x/patches-4.4/036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch b/target/linux/ipq806x/patches-4.4/036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch
deleted file mode 100644
index 06b14052ef..0000000000
--- a/target/linux/ipq806x/patches-4.4/036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From f212be3a6134db8dd7c5f6f0987536a669401fae Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Fri, 14 Aug 2015 11:17:20 -0700
-Subject: [PATCH 2/3] ARM: qcom: add SMEM device node to IPQ806x dts
-
-SMEM is used on IPQ806x to store various board related information such
-as boot device and flash partition layout. We'll declare it as a device
-so we can make use of it thanks to the new SMEM soc driver.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -55,7 +55,7 @@
- no-map;
- };
-
-- smem@41000000 {
-+ smem: smem@41000000 {
- reg = <0x41000000 0x200000>;
- no-map;
- };
-@@ -341,4 +341,10 @@
-
- #hwlock-cells = <1>;
- };
-+
-+ smem {
-+ compatible = "qcom,smem";
-+ memory-region = <&smem>;
-+ hwlocks = <&sfpb_mutex 3>;
-+ };
- };
diff --git a/target/linux/ipq806x/patches-4.4/037-mtd-add-SMEM-parser-for-QCOM-platforms.patch b/target/linux/ipq806x/patches-4.4/037-mtd-add-SMEM-parser-for-QCOM-platforms.patch
deleted file mode 100644
index 7c0c803565..0000000000
--- a/target/linux/ipq806x/patches-4.4/037-mtd-add-SMEM-parser-for-QCOM-platforms.patch
+++ /dev/null
@@ -1,275 +0,0 @@
-From 61e8e1b1af77f24339da3f0822a76fa65ed635c6 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Thu, 13 Aug 2015 09:53:14 -0700
-Subject: [PATCH] mtd: add SMEM parser for QCOM platforms
-
-On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is
-used to store partition layout. This new parser can now be used to read
-SMEM and use it to register an MTD layout according to its content.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
-Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
----
- drivers/mtd/Kconfig | 7 ++
- drivers/mtd/Makefile | 1 +
- drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 236 insertions(+)
- create mode 100644 drivers/mtd/qcom_smem_part.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -190,6 +190,13 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
-+config MTD_QCOM_SMEM_PARTS
-+ tristate "QCOM SMEM partitioning support"
-+ depends on QCOM_SMEM
-+ help
-+ This provides partitions parser for QCOM devices using SMEM
-+ such as IPQ806x.
-+
- comment "User Modules And Translation Layers"
-
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
---- /dev/null
-+++ b/drivers/mtd/qcom_smem_part.c
-@@ -0,0 +1,228 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/device.h>
-+#include <linux/slab.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/spi/spi.h>
-+#include <linux/module.h>
-+
-+#include <linux/soc/qcom/smem.h>
-+
-+/* Processor/host identifier for the application processor */
-+#define SMEM_HOST_APPS 0
-+
-+/* SMEM items index */
-+#define SMEM_AARM_PARTITION_TABLE 9
-+#define SMEM_BOOT_FLASH_TYPE 421
-+#define SMEM_BOOT_FLASH_BLOCK_SIZE 424
-+
-+/* SMEM Flash types */
-+#define SMEM_FLASH_NAND 2
-+#define SMEM_FLASH_SPI 6
-+
-+#define SMEM_PART_NAME_SZ 16
-+#define SMEM_PARTS_MAX 32
-+
-+struct smem_partition {
-+ char name[SMEM_PART_NAME_SZ];
-+ __le32 start;
-+ __le32 size;
-+ __le32 attr;
-+};
-+
-+struct smem_partition_table {
-+ u8 magic[8];
-+ __le32 version;
-+ __le32 len;
-+ struct smem_partition parts[SMEM_PARTS_MAX];
-+};
-+
-+/* SMEM Magic values in partition table */
-+static const u8 SMEM_PTABLE_MAGIC[] = {
-+ 0xaa, 0x73, 0xee, 0x55,
-+ 0xdb, 0xbd, 0x5e, 0xe3,
-+};
-+
-+static int qcom_smem_get_flash_blksz(u64 **smem_blksz)
-+{
-+ size_t size;
-+
-+ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
-+ &size);
-+
-+ if (IS_ERR(*smem_blksz)) {
-+ pr_err("Unable to read flash blksz from SMEM\n");
-+ return -ENOENT;
-+ }
-+
-+ if (size != sizeof(**smem_blksz)) {
-+ pr_err("Invalid flash blksz size in SMEM\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int qcom_smem_get_flash_type(u64 **smem_flash_type)
-+{
-+ size_t size;
-+
-+ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
-+ &size);
-+
-+ if (IS_ERR(*smem_flash_type)) {
-+ pr_err("Unable to read flash type from SMEM\n");
-+ return -ENOENT;
-+ }
-+
-+ if (size != sizeof(**smem_flash_type)) {
-+ pr_err("Invalid flash type size in SMEM\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts)
-+{
-+ size_t size;
-+
-+ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
-+ &size);
-+
-+ if (IS_ERR(*pparts)) {
-+ pr_err("Unable to read partition table from SMEM\n");
-+ return -ENOENT;
-+ }
-+
-+ return 0;
-+}
-+
-+static int of_dev_node_match(struct device *dev, void *data)
-+{
-+ return dev->of_node == data;
-+}
-+
-+static bool is_spi_device(struct device_node *np)
-+{
-+ struct device *dev;
-+
-+ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match);
-+ if (!dev)
-+ return false;
-+
-+ put_device(dev);
-+ return true;
-+}
-+
-+static int parse_qcom_smem_partitions(struct mtd_info *master,
-+ struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
-+{
-+ struct smem_partition_table *smem_parts;
-+ u64 *smem_flash_type, *smem_blksz;
-+ struct mtd_partition *mtd_parts;
-+ struct device_node *of_node = data->of_node;
-+ int i, ret;
-+
-+ /*
-+ * SMEM will only store the partition table of the boot device.
-+ * If this is not the boot device, do not return any partition.
-+ */
-+ ret = qcom_smem_get_flash_type(&smem_flash_type);
-+ if (ret < 0)
-+ return ret;
-+
-+ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master))
-+ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node)))
-+ return 0;
-+
-+ /*
-+ * Just for sanity purpose, make sure the block size in SMEM matches the
-+ * block size of the MTD device
-+ */
-+ ret = qcom_smem_get_flash_blksz(&smem_blksz);
-+ if (ret < 0)
-+ return ret;
-+
-+ if (*smem_blksz != master->erasesize) {
-+ pr_err("SMEM block size differs from MTD block size\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Get partition pointer from SMEM */
-+ ret = qcom_smem_get_flash_partitions(&smem_parts);
-+ if (ret < 0)
-+ return ret;
-+
-+ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic,
-+ sizeof(SMEM_PTABLE_MAGIC))) {
-+ pr_err("SMEM partition magic invalid\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Allocate and populate the mtd structures */
-+ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts),
-+ GFP_KERNEL);
-+ if (!mtd_parts)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < smem_parts->len; i++) {
-+ struct smem_partition *s_part = &smem_parts->parts[i];
-+ struct mtd_partition *m_part = &mtd_parts[i];
-+
-+ m_part->name = s_part->name;
-+ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
-+ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
-+
-+ /*
-+ * The last SMEM partition may have its size marked as
-+ * something like 0xffffffff, which means "until the end of the
-+ * flash device". In this case, truncate it.
-+ */
-+ if (m_part->offset + m_part->size > master->size)
-+ m_part->size = master->size - m_part->offset;
-+ }
-+
-+ *pparts = mtd_parts;
-+
-+ return smem_parts->len;
-+}
-+
-+static struct mtd_part_parser qcom_smem_parser = {
-+ .owner = THIS_MODULE,
-+ .parse_fn = parse_qcom_smem_partitions,
-+ .name = "qcom-smem",
-+};
-+
-+static int __init qcom_smem_parser_init(void)
-+{
-+ register_mtd_parser(&qcom_smem_parser);
-+ return 0;
-+}
-+
-+static void __exit qcom_smem_parser_exit(void)
-+{
-+ deregister_mtd_parser(&qcom_smem_parser);
-+}
-+
-+module_init(qcom_smem_parser_init);
-+module_exit(qcom_smem_parser_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
-+MODULE_DESCRIPTION("Parsing code for SMEM based partition tables");
diff --git a/target/linux/ipq806x/patches-4.4/096-01-usb-dwc3-core-purge-dev_dbg-calls.patch b/target/linux/ipq806x/patches-4.4/096-01-usb-dwc3-core-purge-dev_dbg-calls.patch
deleted file mode 100644
index 6ace50cbc0..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-01-usb-dwc3-core-purge-dev_dbg-calls.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 1407bf13e3bf5f1168484c3e68b6ef9d8cf2bc72 Mon Sep 17 00:00:00 2001
-From: Felipe Balbi <balbi@ti.com>
-Date: Mon, 16 Nov 2015 16:06:37 -0600
-Subject: usb: dwc3: core: purge dev_dbg() calls
-
-The last few dev_dbg() messages are converted to
-tracepoints and we can finally ignore dev_dbg()
-messages during debug sessions.
-
-Signed-off-by: Felipe Balbi <balbi@ti.com>
----
- drivers/usb/dwc3/core.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -272,7 +272,8 @@ static int dwc3_event_buffers_setup(stru
-
- for (n = 0; n < dwc->num_event_buffers; n++) {
- evt = dwc->ev_buffs[n];
-- dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
-+ dwc3_trace(trace_dwc3_core,
-+ "Event buf %p dma %08llx length %d\n",
- evt->buf, (unsigned long long) evt->dma,
- evt->length);
-
-@@ -608,12 +609,13 @@ static int dwc3_core_init(struct dwc3 *d
- reg |= DWC3_GCTL_GBLHIBERNATIONEN;
- break;
- default:
-- dev_dbg(dwc->dev, "No power optimization available\n");
-+ dwc3_trace(trace_dwc3_core, "No power optimization available\n");
- }
-
- /* check if current dwc3 is on simulation board */
- if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
-- dev_dbg(dwc->dev, "it is on FPGA board\n");
-+ dwc3_trace(trace_dwc3_core,
-+ "running on FPGA platform\n");
- dwc->is_fpga = true;
- }
-
diff --git a/target/linux/ipq806x/patches-4.4/096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch b/target/linux/ipq806x/patches-4.4/096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch
deleted file mode 100644
index de0e47fc14..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 2c7f1bd9127a1a49ee25d9c2b2ce17b11c7fb05f Mon Sep 17 00:00:00 2001
-From: John Youn <John.Youn@synopsys.com>
-Date: Fri, 5 Feb 2016 17:08:59 -0800
-Subject: usb: dwc3: Update maximum_speed for SuperSpeedPlus
-
-If the maximum_speed is not set, set it to a known value, either
-SuperSpeed or SuperSpeedPlus based on the type of controller we are
-using. If we are on DWC_usb31 controller, check the PHY interface to see
-if it is capable of SuperSpeedPlus.
-
-Also this check is moved after dwc3_core_init() so that we can check
-dwc->revision.
-
-Signed-off-by: John Youn <johnyoun@synopsys.com>
-Signed-off-by: Felipe Balbi <balbi@kernel.org>
----
- drivers/usb/dwc3/core.c | 17 +++++++++++++----
- 1 file changed, 13 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -962,10 +962,6 @@ static int dwc3_probe(struct platform_de
- fladj = pdata->fladj_value;
- }
-
-- /* default to superspeed if no maximum_speed passed */
-- if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
-- dwc->maximum_speed = USB_SPEED_SUPER;
--
- dwc->lpm_nyet_threshold = lpm_nyet_threshold;
- dwc->tx_de_emphasis = tx_de_emphasis;
-
-@@ -1016,6 +1012,19 @@ static int dwc3_probe(struct platform_de
- goto err1;
- }
-
-+ /* default to superspeed if no maximum_speed passed */
-+ if (dwc->maximum_speed == USB_SPEED_UNKNOWN) {
-+ dwc->maximum_speed = USB_SPEED_SUPER;
-+
-+ /*
-+ * default to superspeed plus if we are capable.
-+ */
-+ if (dwc3_is_usb31(dwc) &&
-+ (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
-+ DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
-+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
-+ }
-+
- /* Adjust Frame Length */
- dwc3_frame_length_adjustment(dwc, fladj);
-
diff --git a/target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch b/target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch
deleted file mode 100644
index 0f17918d36..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 77966eb85e6d988a6daaf8ac14ac33026ceb3ab7 Mon Sep 17 00:00:00 2001
-From: John Youn <John.Youn@synopsys.com>
-Date: Fri, 19 Feb 2016 17:31:01 -0800
-Subject: usb: dwc3: Validate the maximum_speed parameter
-
-Check that dwc->maximum_speed is set to a valid value. Also add an error
-when we use it later if we encounter an invalid value.
-
-Signed-off-by: John Youn <johnyoun@synopsys.com>
-Signed-off-by: Felipe Balbi <balbi@kernel.org>
----
- drivers/usb/dwc3/core.c | 18 ++++++++++++++++--
- drivers/usb/dwc3/gadget.c | 9 ++++++---
- 2 files changed, 22 insertions(+), 5 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -1012,8 +1012,20 @@ static int dwc3_probe(struct platform_de
- goto err1;
- }
-
-- /* default to superspeed if no maximum_speed passed */
-- if (dwc->maximum_speed == USB_SPEED_UNKNOWN) {
-+ /* Check the maximum_speed parameter */
-+ switch (dwc->maximum_speed) {
-+ case USB_SPEED_LOW:
-+ case USB_SPEED_FULL:
-+ case USB_SPEED_HIGH:
-+ case USB_SPEED_SUPER:
-+ case USB_SPEED_SUPER_PLUS:
-+ break;
-+ default:
-+ dev_err(dev, "invalid maximum_speed parameter %d\n",
-+ dwc->maximum_speed);
-+ /* fall through */
-+ case USB_SPEED_UNKNOWN:
-+ /* default to superspeed */
- dwc->maximum_speed = USB_SPEED_SUPER;
-
- /*
-@@ -1023,6 +1035,8 @@ static int dwc3_probe(struct platform_de
- (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
- dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
-+
-+ break;
- }
-
- /* Adjust Frame Length */
---- a/drivers/usb/dwc3/gadget.c
-+++ b/drivers/usb/dwc3/gadget.c
-@@ -1634,10 +1634,13 @@ static int dwc3_gadget_start(struct usb_
- case USB_SPEED_HIGH:
- reg |= DWC3_DSTS_HIGHSPEED;
- break;
-- case USB_SPEED_SUPER: /* FALLTHROUGH */
-- case USB_SPEED_UNKNOWN: /* FALTHROUGH */
- default:
-- reg |= DWC3_DSTS_SUPERSPEED;
-+ dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
-+ dwc->maximum_speed);
-+ /* fall through */
-+ case USB_SPEED_SUPER:
-+ reg |= DWC3_DCFG_SUPERSPEED;
-+ break;
- }
- }
- dwc3_writel(dwc->regs, DWC3_DCFG, reg);
diff --git a/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch b/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch
deleted file mode 100644
index b6f583053f..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From c4137a9c841ec7fb300782d211f2d6907f4d6e20 Mon Sep 17 00:00:00 2001
-From: John Youn <John.Youn@synopsys.com>
-Date: Fri, 5 Feb 2016 17:08:18 -0800
-Subject: usb: dwc3: DWC_usb31 controller check
-
-Add a convenience function to check if the controller is DWC_usb31.
-
-Signed-off-by: John Youn <johnyoun@synopsys.com>
-Signed-off-by: Felipe Balbi <balbi@kernel.org>
----
- drivers/usb/dwc3/core.h | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -1019,6 +1019,12 @@ struct dwc3_gadget_ep_cmd_params {
- void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
- int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
-
-+/* check whether we are on the DWC_usb31 core */
-+static inline bool dwc3_is_usb31(struct dwc3 *dwc)
-+{
-+ return !!(dwc->revision & DWC3_REVISION_IS_DWC31);
-+}
-+
- #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
- int dwc3_host_init(struct dwc3 *dwc);
- void dwc3_host_exit(struct dwc3 *dwc);
diff --git a/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch b/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch
deleted file mode 100644
index 264893d53d..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 1f38f88a24c86d46cf47782ffabd5457f231f8ca Mon Sep 17 00:00:00 2001
-From: John Youn <John.Youn@synopsys.com>
-Date: Fri, 5 Feb 2016 17:08:31 -0800
-Subject: usb: dwc3: Update register fields for SuperSpeedPlus
-
-Update various registers fields definitions for the DWC_usb31 controller
-for SuperSpeedPlus support.
-
-Signed-off-by: John Youn <johnyoun@synopsys.com>
-Signed-off-by: Felipe Balbi <balbi@kernel.org>
----
- drivers/usb/dwc3/core.h | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -220,7 +220,8 @@
- /* Global HWPARAMS3 Register */
- #define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3)
- #define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0
--#define DWC3_GHWPARAMS3_SSPHY_IFC_ENA 1
-+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1
-+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */
- #define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2)
- #define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0
- #define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1
-@@ -246,6 +247,7 @@
- #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
-
- #define DWC3_DCFG_SPEED_MASK (7 << 0)
-+#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
- #define DWC3_DCFG_SUPERSPEED (4 << 0)
- #define DWC3_DCFG_HIGHSPEED (0 << 0)
- #define DWC3_DCFG_FULLSPEED2 (1 << 0)
-@@ -336,6 +338,7 @@
-
- #define DWC3_DSTS_CONNECTSPD (7 << 0)
-
-+#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
- #define DWC3_DSTS_SUPERSPEED (4 << 0)
- #define DWC3_DSTS_HIGHSPEED (0 << 0)
- #define DWC3_DSTS_FULLSPEED2 (1 << 0)
diff --git a/target/linux/ipq806x/patches-4.4/096-06-usb-dwc3-core-improve-reset-sequence.patch b/target/linux/ipq806x/patches-4.4/096-06-usb-dwc3-core-improve-reset-sequence.patch
deleted file mode 100644
index 428a796e07..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-06-usb-dwc3-core-improve-reset-sequence.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From f59dcab176293b646e1358144c93c58c3cda2813 Mon Sep 17 00:00:00 2001
-From: Felipe Balbi <felipe.balbi@linux.intel.com>
-Date: Fri, 11 Mar 2016 10:51:52 +0200
-Subject: usb: dwc3: core: improve reset sequence
-
-According to Synopsys Databook, we shouldn't be
-relying on GCTL.CORESOFTRESET bit as that's only for
-debugging purposes. Instead, let's use DCTL.CSFTRST
-if we're OTG or PERIPHERAL mode.
-
-Host side block will be reset by XHCI driver if
-necessary. Note that this reduces amount of time
-spent on dwc3_probe() by a long margin.
-
-We're still gonna wait for reset to finish for a
-long time (default to 1ms max), but tests show that
-the reset polling loop executed at most 19 times
-(modprobe dwc3 && modprobe -r dwc3 executed 1000
-times in a row).
-
-Suggested-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/dwc3/core.c | 48 ++++++++++++++++++------------------------------
- 1 file changed, 18 insertions(+), 30 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -67,23 +67,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32
- static int dwc3_core_soft_reset(struct dwc3 *dwc)
- {
- u32 reg;
-+ int retries = 1000;
- int ret;
-
-- /* Before Resetting PHY, put Core in Reset */
-- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
-- reg |= DWC3_GCTL_CORESOFTRESET;
-- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
--
-- /* Assert USB3 PHY reset */
-- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
-- reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
-- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
--
-- /* Assert USB2 PHY reset */
-- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-- reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
-- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
--
- usb_phy_init(dwc->usb2_phy);
- usb_phy_init(dwc->usb3_phy);
- ret = phy_init(dwc->usb2_generic_phy);
-@@ -95,26 +81,28 @@ static int dwc3_core_soft_reset(struct d
- phy_exit(dwc->usb2_generic_phy);
- return ret;
- }
-- mdelay(100);
-
-- /* Clear USB3 PHY reset */
-- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
-- reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
-- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
--
-- /* Clear USB2 PHY reset */
-- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-- reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
-- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
--
-- mdelay(100);
--
-- /* After PHYs are stable we can take Core out of reset state */
-- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
-- reg &= ~DWC3_GCTL_CORESOFTRESET;
-- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
-+ /*
-+ * We're resetting only the device side because, if we're in host mode,
-+ * XHCI driver will reset the host block. If dwc3 was configured for
-+ * host-only mode, then we can return early.
-+ */
-+ if (dwc->dr_mode == USB_DR_MODE_HOST)
-+ return 0;
-+
-+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
-+ reg |= DWC3_DCTL_CSFTRST;
-+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
-+
-+ do {
-+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
-+ if (!(reg & DWC3_DCTL_CSFTRST))
-+ return 0;
-+
-+ udelay(1);
-+ } while (--retries);
-
-- return 0;
-+ return -ETIMEDOUT;
- }
-
- /**
diff --git a/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch b/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch
deleted file mode 100644
index 132d131dfb..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From bc5081617faeb3b2f0c126dc37264b87af7da47f Mon Sep 17 00:00:00 2001
-From: Felipe Balbi <felipe.balbi@linux.intel.com>
-Date: Thu, 4 Feb 2016 14:18:01 +0200
-Subject: usb: dwc3: drop FIFO resizing logic
-
-That FIFO resizing logic was added to support OMAP5
-ES1.0 which had a bogus default FIFO size. I can't
-remember the exact size of default FIFO, but it was
-less than one bulk superspeed packet (<1024) which
-would prevent USB3 from ever working on OMAP5 ES1.0.
-
-However, OMAP5 ES1.0 support has been dropped by
-commit aa2f4b16f830 ("ARM: OMAP5: id: Remove ES1.0
-support") which renders FIFO resizing unnecessary.
-
-Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- Documentation/devicetree/bindings/usb/dwc3.txt | 4 +-
- .../devicetree/bindings/usb/qcom,dwc3.txt | 1 -
- drivers/usb/dwc3/core.c | 4 -
- drivers/usb/dwc3/core.h | 5 --
- drivers/usb/dwc3/ep0.c | 9 ---
- drivers/usb/dwc3/gadget.c | 86 ----------------------
- drivers/usb/dwc3/platform_data.h | 1 -
- 7 files changed, 2 insertions(+), 108 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/dwc3.txt
-+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
-@@ -14,7 +14,6 @@ Optional properties:
- the second element is expected to be a handle to the USB3/SS PHY
- - phys: from the *Generic PHY* bindings
- - phy-names: from the *Generic PHY* bindings
-- - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
- - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
- - snps,disable_scramble_quirk: true when SW should disable data scrambling.
- Only really useful for FPGA builds.
-@@ -47,6 +46,8 @@ Optional properties:
- register for post-silicon frame length adjustment when the
- fladj_30mhz_sdbnd signal is invalid or incorrect.
-
-+ - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
-+
- This is usually a subnode to DWC3 glue to which it is connected.
-
- dwc3@4a030000 {
-@@ -54,5 +55,4 @@ dwc3@4a030000 {
- reg = <0x4a030000 0xcfff>;
- interrupts = <0 92 4>
- usb-phy = <&usb2_phy>, <&usb3,phy>;
-- tx-fifo-resize;
- };
---- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
-+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
-@@ -59,7 +59,6 @@ Example device nodes:
- interrupts = <0 205 0x4>;
- phys = <&hs_phy>, <&ss_phy>;
- phy-names = "usb2-phy", "usb3-phy";
-- tx-fifo-resize;
- dr_mode = "host";
- };
- };
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -882,9 +882,6 @@ static int dwc3_probe(struct platform_de
- dwc->usb3_lpm_capable = device_property_read_bool(dev,
- "snps,usb3_lpm_capable");
-
-- dwc->needs_fifo_resize = device_property_read_bool(dev,
-- "tx-fifo-resize");
--
- dwc->disable_scramble_quirk = device_property_read_bool(dev,
- "snps,disable_scramble_quirk");
- dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
-@@ -926,7 +923,6 @@ static int dwc3_probe(struct platform_de
- if (pdata->hird_threshold)
- hird_threshold = pdata->hird_threshold;
-
-- dwc->needs_fifo_resize = pdata->tx_fifo_resize;
- dwc->usb3_lpm_capable = pdata->usb3_lpm_capable;
- dwc->dr_mode = pdata->dr_mode;
-
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -705,9 +705,7 @@ struct dwc3_scratchpad_array {
- * 0 - utmi_sleep_n
- * 1 - utmi_l1_suspend_n
- * @is_fpga: true when we are using the FPGA board
-- * @needs_fifo_resize: not all users might want fifo resizing, flag it
- * @pullups_connected: true when Run/Stop bit is set
-- * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
- * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
- * @start_config_issued: true when StartConfig command has been issued
- * @three_stage_setup: set if we perform a three phase setup
-@@ -850,9 +848,7 @@ struct dwc3 {
- unsigned has_lpm_erratum:1;
- unsigned is_utmi_l1_suspend:1;
- unsigned is_fpga:1;
-- unsigned needs_fifo_resize:1;
- unsigned pullups_connected:1;
-- unsigned resize_fifos:1;
- unsigned setup_packet_pending:1;
- unsigned three_stage_setup:1;
- unsigned usb3_lpm_capable:1;
-@@ -1020,7 +1016,6 @@ struct dwc3_gadget_ep_cmd_params {
-
- /* prototypes */
- void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
--int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
-
- /* check whether we are on the DWC_usb31 core */
- static inline bool dwc3_is_usb31(struct dwc3 *dwc)
---- a/drivers/usb/dwc3/ep0.c
-+++ b/drivers/usb/dwc3/ep0.c
-@@ -587,9 +587,6 @@ static int dwc3_ep0_set_config(struct dw
- reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
- dwc3_writel(dwc->regs, DWC3_DCTL, reg);
--
-- dwc->resize_fifos = true;
-- dwc3_trace(trace_dwc3_ep0, "resize FIFOs flag SET");
- }
- break;
-
-@@ -1028,12 +1025,6 @@ static int dwc3_ep0_start_control_status
-
- static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
- {
-- if (dwc->resize_fifos) {
-- dwc3_trace(trace_dwc3_ep0, "Resizing FIFOs");
-- dwc3_gadget_resize_tx_fifos(dwc);
-- dwc->resize_fifos = 0;
-- }
--
- WARN_ON(dwc3_ep0_start_control_status(dep));
- }
-
---- a/drivers/usb/dwc3/gadget.c
-+++ b/drivers/usb/dwc3/gadget.c
-@@ -145,92 +145,6 @@ int dwc3_gadget_set_link_state(struct dw
- return -ETIMEDOUT;
- }
-
--/**
-- * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
-- * @dwc: pointer to our context structure
-- *
-- * This function will a best effort FIFO allocation in order
-- * to improve FIFO usage and throughput, while still allowing
-- * us to enable as many endpoints as possible.
-- *
-- * Keep in mind that this operation will be highly dependent
-- * on the configured size for RAM1 - which contains TxFifo -,
-- * the amount of endpoints enabled on coreConsultant tool, and
-- * the width of the Master Bus.
-- *
-- * In the ideal world, we would always be able to satisfy the
-- * following equation:
-- *
-- * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
-- * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
-- *
-- * Unfortunately, due to many variables that's not always the case.
-- */
--int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
--{
-- int last_fifo_depth = 0;
-- int ram1_depth;
-- int fifo_size;
-- int mdwidth;
-- int num;
--
-- if (!dwc->needs_fifo_resize)
-- return 0;
--
-- ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
-- mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
--
-- /* MDWIDTH is represented in bits, we need it in bytes */
-- mdwidth >>= 3;
--
-- /*
-- * FIXME For now we will only allocate 1 wMaxPacketSize space
-- * for each enabled endpoint, later patches will come to
-- * improve this algorithm so that we better use the internal
-- * FIFO space
-- */
-- for (num = 0; num < dwc->num_in_eps; num++) {
-- /* bit0 indicates direction; 1 means IN ep */
-- struct dwc3_ep *dep = dwc->eps[(num << 1) | 1];
-- int mult = 1;
-- int tmp;
--
-- if (!(dep->flags & DWC3_EP_ENABLED))
-- continue;
--
-- if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
-- || usb_endpoint_xfer_isoc(dep->endpoint.desc))
-- mult = 3;
--
-- /*
-- * REVISIT: the following assumes we will always have enough
-- * space available on the FIFO RAM for all possible use cases.
-- * Make sure that's true somehow and change FIFO allocation
-- * accordingly.
-- *
-- * If we have Bulk or Isochronous endpoints, we want
-- * them to be able to be very, very fast. So we're giving
-- * those endpoints a fifo_size which is enough for 3 full
-- * packets
-- */
-- tmp = mult * (dep->endpoint.maxpacket + mdwidth);
-- tmp += mdwidth;
--
-- fifo_size = DIV_ROUND_UP(tmp, mdwidth);
--
-- fifo_size |= (last_fifo_depth << 16);
--
-- dwc3_trace(trace_dwc3_gadget, "%s: Fifo Addr %04x Size %d",
-- dep->name, last_fifo_depth, fifo_size & 0xffff);
--
-- dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
--
-- last_fifo_depth += (fifo_size & 0xffff);
-- }
--
-- return 0;
--}
--
- void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
- int status)
- {
---- a/drivers/usb/dwc3/platform_data.h
-+++ b/drivers/usb/dwc3/platform_data.h
-@@ -23,7 +23,6 @@
- struct dwc3_platform_data {
- enum usb_device_speed maximum_speed;
- enum usb_dr_mode dr_mode;
-- bool tx_fifo_resize;
- bool usb3_lpm_capable;
-
- unsigned is_utmi_l1_suspend:1;
diff --git a/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch b/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch
deleted file mode 100644
index 5067548019..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch
+++ /dev/null
@@ -1,265 +0,0 @@
-From 660e9bde74d6915227d7ee3485b11e5f52637b26 Mon Sep 17 00:00:00 2001
-From: Felipe Balbi <felipe.balbi@linux.intel.com>
-Date: Wed, 30 Mar 2016 09:26:24 +0300
-Subject: usb: dwc3: remove num_event_buffers
-
-We never, ever route any of the other event buffers
-so we might as well drop support for them.
-
-Until someone has a real, proper benefit for
-multiple event buffers, we will rely on a single
-one. This also helps reduce memory footprint of
-dwc3.ko which won't allocate memory for the extra
-event buffers.
-
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/dwc3/core.c | 81 +++++++++++++++++++----------------------------
- drivers/usb/dwc3/core.h | 2 --
- drivers/usb/dwc3/gadget.c | 38 +++++++---------------
- 3 files changed, 44 insertions(+), 77 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -203,13 +203,10 @@ static struct dwc3_event_buffer *dwc3_al
- static void dwc3_free_event_buffers(struct dwc3 *dwc)
- {
- struct dwc3_event_buffer *evt;
-- int i;
-
-- for (i = 0; i < dwc->num_event_buffers; i++) {
-- evt = dwc->ev_buffs[i];
-- if (evt)
-- dwc3_free_one_event_buffer(dwc, evt);
-- }
-+ evt = dwc->ev_buffs[0];
-+ if (evt)
-+ dwc3_free_one_event_buffer(dwc, evt);
- }
-
- /**
-@@ -222,27 +219,19 @@ static void dwc3_free_event_buffers(stru
- */
- static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
- {
-- int num;
-- int i;
--
-- num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
-- dwc->num_event_buffers = num;
-+ struct dwc3_event_buffer *evt;
-
-- dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num,
-+ dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs),
- GFP_KERNEL);
- if (!dwc->ev_buffs)
- return -ENOMEM;
-
-- for (i = 0; i < num; i++) {
-- struct dwc3_event_buffer *evt;
--
-- evt = dwc3_alloc_one_event_buffer(dwc, length);
-- if (IS_ERR(evt)) {
-- dev_err(dwc->dev, "can't allocate event buffer\n");
-- return PTR_ERR(evt);
-- }
-- dwc->ev_buffs[i] = evt;
-+ evt = dwc3_alloc_one_event_buffer(dwc, length);
-+ if (IS_ERR(evt)) {
-+ dev_err(dwc->dev, "can't allocate event buffer\n");
-+ return PTR_ERR(evt);
- }
-+ dwc->ev_buffs[0] = evt;
-
- return 0;
- }
-@@ -256,25 +245,22 @@ static int dwc3_alloc_event_buffers(stru
- static int dwc3_event_buffers_setup(struct dwc3 *dwc)
- {
- struct dwc3_event_buffer *evt;
-- int n;
-
-- for (n = 0; n < dwc->num_event_buffers; n++) {
-- evt = dwc->ev_buffs[n];
-- dwc3_trace(trace_dwc3_core,
-- "Event buf %p dma %08llx length %d\n",
-- evt->buf, (unsigned long long) evt->dma,
-- evt->length);
--
-- evt->lpos = 0;
--
-- dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n),
-- lower_32_bits(evt->dma));
-- dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
-- upper_32_bits(evt->dma));
-- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n),
-- DWC3_GEVNTSIZ_SIZE(evt->length));
-- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
-- }
-+ evt = dwc->ev_buffs[0];
-+ dwc3_trace(trace_dwc3_core,
-+ "Event buf %p dma %08llx length %d\n",
-+ evt->buf, (unsigned long long) evt->dma,
-+ evt->length);
-+
-+ evt->lpos = 0;
-+
-+ dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
-+ lower_32_bits(evt->dma));
-+ dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0),
-+ upper_32_bits(evt->dma));
-+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
-+ DWC3_GEVNTSIZ_SIZE(evt->length));
-+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
-
- return 0;
- }
-@@ -282,19 +268,16 @@ static int dwc3_event_buffers_setup(stru
- static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
- {
- struct dwc3_event_buffer *evt;
-- int n;
-
-- for (n = 0; n < dwc->num_event_buffers; n++) {
-- evt = dwc->ev_buffs[n];
-+ evt = dwc->ev_buffs[0];
-
-- evt->lpos = 0;
-+ evt->lpos = 0;
-
-- dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
-- dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
-- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK
-- | DWC3_GEVNTSIZ_SIZE(0));
-- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
-- }
-+ dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), 0);
-+ dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0);
-+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK
-+ | DWC3_GEVNTSIZ_SIZE(0));
-+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
- }
-
- static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -663,7 +663,6 @@ struct dwc3_scratchpad_array {
- * @regs: base address for our registers
- * @regs_size: address space size
- * @nr_scratch: number of scratch buffers
-- * @num_event_buffers: calculated number of event buffers
- * @u1u2: only used on revisions <1.83a for workaround
- * @maximum_speed: maximum speed requested (mainly for testing purposes)
- * @revision: revision register contents
-@@ -773,7 +772,6 @@ struct dwc3 {
- u32 gctl;
-
- u32 nr_scratch;
-- u32 num_event_buffers;
- u32 u1u2;
- u32 maximum_speed;
-
---- a/drivers/usb/dwc3/gadget.c
-+++ b/drivers/usb/dwc3/gadget.c
-@@ -2556,14 +2556,14 @@ static void dwc3_process_event_entry(str
- }
- }
-
--static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
-+static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc)
- {
- struct dwc3_event_buffer *evt;
- irqreturn_t ret = IRQ_NONE;
- int left;
- u32 reg;
-
-- evt = dwc->ev_buffs[buf];
-+ evt = dwc->ev_buffs[0];
- left = evt->count;
-
- if (!(evt->flags & DWC3_EVENT_PENDING))
-@@ -2588,7 +2588,7 @@ static irqreturn_t dwc3_process_event_bu
- evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
- left -= 4;
-
-- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
-+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 4);
- }
-
- evt->count = 0;
-@@ -2596,9 +2596,9 @@ static irqreturn_t dwc3_process_event_bu
- ret = IRQ_HANDLED;
-
- /* Unmask interrupt */
-- reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
-+ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
- reg &= ~DWC3_GEVNTSIZ_INTMASK;
-- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
-+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
-
- return ret;
- }
-@@ -2608,27 +2608,23 @@ static irqreturn_t dwc3_thread_interrupt
- struct dwc3 *dwc = _dwc;
- unsigned long flags;
- irqreturn_t ret = IRQ_NONE;
-- int i;
-
- spin_lock_irqsave(&dwc->lock, flags);
--
-- for (i = 0; i < dwc->num_event_buffers; i++)
-- ret |= dwc3_process_event_buf(dwc, i);
--
-+ ret = dwc3_process_event_buf(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
-
- return ret;
- }
-
--static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
-+static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc)
- {
- struct dwc3_event_buffer *evt;
- u32 count;
- u32 reg;
-
-- evt = dwc->ev_buffs[buf];
-+ evt = dwc->ev_buffs[0];
-
-- count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
-+ count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
- count &= DWC3_GEVNTCOUNT_MASK;
- if (!count)
- return IRQ_NONE;
-@@ -2637,9 +2633,9 @@ static irqreturn_t dwc3_check_event_buf(
- evt->flags |= DWC3_EVENT_PENDING;
-
- /* Mask interrupt */
-- reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
-+ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
- reg |= DWC3_GEVNTSIZ_INTMASK;
-- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
-+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
-
- return IRQ_WAKE_THREAD;
- }
-@@ -2647,18 +2643,8 @@ static irqreturn_t dwc3_check_event_buf(
- static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
- {
- struct dwc3 *dwc = _dwc;
-- int i;
-- irqreturn_t ret = IRQ_NONE;
--
-- for (i = 0; i < dwc->num_event_buffers; i++) {
-- irqreturn_t status;
-
-- status = dwc3_check_event_buf(dwc, i);
-- if (status == IRQ_WAKE_THREAD)
-- ret = status;
-- }
--
-- return ret;
-+ return dwc3_check_event_buf(dwc);
- }
-
- /**
diff --git a/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch b/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch
deleted file mode 100644
index 827b621c98..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 696c8b1282205caa5206264449f80ef756f14ef7 Mon Sep 17 00:00:00 2001
-From: Felipe Balbi <felipe.balbi@linux.intel.com>
-Date: Wed, 30 Mar 2016 09:37:03 +0300
-Subject: usb: dwc3: drop ev_buffs array
-
-we will be using a single event buffer and that
-renders ev_buffs array unnecessary. Let's remove it
-in favor of a single pointer to a single event
-buffer.
-
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/dwc3/core.c | 13 ++++---------
- drivers/usb/dwc3/core.h | 2 +-
- drivers/usb/dwc3/gadget.c | 4 ++--
- 3 files changed, 7 insertions(+), 12 deletions(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -204,7 +204,7 @@ static void dwc3_free_event_buffers(stru
- {
- struct dwc3_event_buffer *evt;
-
-- evt = dwc->ev_buffs[0];
-+ evt = dwc->ev_buf;
- if (evt)
- dwc3_free_one_event_buffer(dwc, evt);
- }
-@@ -221,17 +221,12 @@ static int dwc3_alloc_event_buffers(stru
- {
- struct dwc3_event_buffer *evt;
-
-- dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs),
-- GFP_KERNEL);
-- if (!dwc->ev_buffs)
-- return -ENOMEM;
--
- evt = dwc3_alloc_one_event_buffer(dwc, length);
- if (IS_ERR(evt)) {
- dev_err(dwc->dev, "can't allocate event buffer\n");
- return PTR_ERR(evt);
- }
-- dwc->ev_buffs[0] = evt;
-+ dwc->ev_buf = evt;
-
- return 0;
- }
-@@ -246,7 +241,7 @@ static int dwc3_event_buffers_setup(stru
- {
- struct dwc3_event_buffer *evt;
-
-- evt = dwc->ev_buffs[0];
-+ evt = dwc->ev_buf;
- dwc3_trace(trace_dwc3_core,
- "Event buf %p dma %08llx length %d\n",
- evt->buf, (unsigned long long) evt->dma,
-@@ -269,7 +264,7 @@ static void dwc3_event_buffers_cleanup(s
- {
- struct dwc3_event_buffer *evt;
-
-- evt = dwc->ev_buffs[0];
-+ evt = dwc->ev_buf;
-
- evt->lpos = 0;
-
---- a/drivers/usb/dwc3/core.h
-+++ b/drivers/usb/dwc3/core.h
-@@ -748,7 +748,7 @@ struct dwc3 {
- struct platform_device *xhci;
- struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM];
-
-- struct dwc3_event_buffer **ev_buffs;
-+ struct dwc3_event_buffer *ev_buf;
- struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
-
- struct usb_gadget gadget;
---- a/drivers/usb/dwc3/gadget.c
-+++ b/drivers/usb/dwc3/gadget.c
-@@ -2563,7 +2563,7 @@ static irqreturn_t dwc3_process_event_bu
- int left;
- u32 reg;
-
-- evt = dwc->ev_buffs[0];
-+ evt = dwc->ev_buf;
- left = evt->count;
-
- if (!(evt->flags & DWC3_EVENT_PENDING))
-@@ -2622,7 +2622,7 @@ static irqreturn_t dwc3_check_event_buf(
- u32 count;
- u32 reg;
-
-- evt = dwc->ev_buffs[0];
-+ evt = dwc->ev_buf;
-
- count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
- count &= DWC3_GEVNTCOUNT_MASK;
diff --git a/target/linux/ipq806x/patches-4.4/096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch b/target/linux/ipq806x/patches-4.4/096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch
deleted file mode 100644
index 8bf09edfbd..0000000000
--- a/target/linux/ipq806x/patches-4.4/096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 5c4ad318de3b8e8680d654c82a254c4b65243739 Mon Sep 17 00:00:00 2001
-From: Felipe Balbi <balbi@kernel.org>
-Date: Mon, 11 Apr 2016 17:12:34 +0300
-Subject: usb: dwc3: core: fix PHY handling during suspend
-
-we need to power off the PHY during suspend and
-power it back on during resume.
-
-Signed-off-by: Felipe Balbi <balbi@kernel.org>
-[nsekhar@ti.com: fix call to usb_phy_set_suspend() in dwc3_suspend()]
-Signed-off-by: Sekhar Nori <nsekhar@ti.com>
-Signed-off-by: Roger Quadros <rogerq@ti.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/dwc3/core.c | 23 ++++++++++++++++++++++-
- 1 file changed, 22 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/dwc3/core.c
-+++ b/drivers/usb/dwc3/core.c
-@@ -1124,6 +1124,11 @@ static int dwc3_suspend(struct device *d
- phy_exit(dwc->usb2_generic_phy);
- phy_exit(dwc->usb3_generic_phy);
-
-+ usb_phy_set_suspend(dwc->usb2_phy, 1);
-+ usb_phy_set_suspend(dwc->usb3_phy, 1);
-+ WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0);
-+ WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0);
-+
- pinctrl_pm_select_sleep_state(dev);
-
- return 0;
-@@ -1137,11 +1142,21 @@ static int dwc3_resume(struct device *de
-
- pinctrl_pm_select_default_state(dev);
-
-+ usb_phy_set_suspend(dwc->usb2_phy, 0);
-+ usb_phy_set_suspend(dwc->usb3_phy, 0);
-+ ret = phy_power_on(dwc->usb2_generic_phy);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = phy_power_on(dwc->usb3_generic_phy);
-+ if (ret < 0)
-+ goto err_usb2phy_power;
-+
- usb_phy_init(dwc->usb3_phy);
- usb_phy_init(dwc->usb2_phy);
- ret = phy_init(dwc->usb2_generic_phy);
- if (ret < 0)
-- return ret;
-+ goto err_usb3phy_power;
-
- ret = phy_init(dwc->usb3_generic_phy);
- if (ret < 0)
-@@ -1174,6 +1189,12 @@ static int dwc3_resume(struct device *de
- err_usb2phy_init:
- phy_exit(dwc->usb2_generic_phy);
-
-+err_usb3phy_power:
-+ phy_power_off(dwc->usb3_generic_phy);
-+
-+err_usb2phy_power:
-+ phy_power_off(dwc->usb2_generic_phy);
-+
- return ret;
- }
-
diff --git a/target/linux/ipq806x/patches-4.4/097-1-usb-dwc3-add-generic-OF-glue-layer.patch b/target/linux/ipq806x/patches-4.4/097-1-usb-dwc3-add-generic-OF-glue-layer.patch
deleted file mode 100644
index 214bedc95a..0000000000
--- a/target/linux/ipq806x/patches-4.4/097-1-usb-dwc3-add-generic-OF-glue-layer.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-From 41c2b5280cd2fa3e198c422cdf223ba6e48f857a Mon Sep 17 00:00:00 2001
-From: Felipe Balbi <balbi@ti.com>
-Date: Wed, 18 Nov 2015 13:15:20 -0600
-Subject: [PATCH] usb: dwc3: add generic OF glue layer
-
-For simple platforms which merely enable some clocks
-and populate its children, we can use this generic
-glue layer to avoid boilerplate code duplication.
-
-For now this supports Qcom and Xilinx, but if we
-find a way to add generic handling of regulators and
-optional PHYs, we can absorb exynos as well.
-
-Tested-by: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
-Signed-off-by: Felipe Balbi <balbi@ti.com>
-(cherry picked from commit 16adc674d0d68a50dfc725574738d7ae11cf5d7e)
-
-Change-Id: I6fd260442997b198dc12ca726814b7a9518e6353
-Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
----
- drivers/usb/dwc3/Kconfig | 9 ++
- drivers/usb/dwc3/Makefile | 1 +
- drivers/usb/dwc3/dwc3-of-simple.c | 178 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 188 insertions(+)
- create mode 100644 drivers/usb/dwc3/dwc3-of-simple.c
-
---- a/drivers/usb/dwc3/Kconfig
-+++ b/drivers/usb/dwc3/Kconfig
-@@ -87,6 +87,15 @@ config USB_DWC3_KEYSTONE
- Support of USB2/3 functionality in TI Keystone2 platforms.
- Say 'Y' or 'M' here if you have one such device
-
-+config USB_DWC3_OF_SIMPLE
-+ tristate "Generic OF Simple Glue Layer"
-+ depends on OF && COMMON_CLK
-+ default USB_DWC3
-+ help
-+ Support USB2/3 functionality in simple SoC integrations.
-+ Currently supports Xilinx and Qualcomm DWC USB3 IP.
-+ Say 'Y' or 'M' if you have one such device.
-+
- config USB_DWC3_ST
- tristate "STMicroelectronics Platforms"
- depends on ARCH_STI && OF
---- a/drivers/usb/dwc3/Makefile
-+++ b/drivers/usb/dwc3/Makefile
-@@ -37,5 +37,6 @@ obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-oma
- obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o
- obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
- obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o
-+obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o
- obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
- obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
---- /dev/null
-+++ b/drivers/usb/dwc3/dwc3-of-simple.c
-@@ -0,0 +1,178 @@
-+/**
-+ * dwc3-of-simple.c - OF glue layer for simple integrations
-+ *
-+ * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com
-+ *
-+ * Author: Felipe Balbi <balbi@ti.com>
-+ *
-+ * This program is free software: you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 of
-+ * the License as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * This is a combination of the old dwc3-qcom.c by Ivan T. Ivanov
-+ * <iivanov@mm-sol.com> and the original patch adding support for Xilinx' SoC
-+ * by Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/pm_runtime.h>
-+
-+struct dwc3_of_simple {
-+ struct device *dev;
-+ struct clk **clks;
-+ int num_clocks;
-+};
-+
-+static int dwc3_of_simple_probe(struct platform_device *pdev)
-+{
-+ struct dwc3_of_simple *simple;
-+ struct device *dev = &pdev->dev;
-+ struct device_node *np = dev->of_node;
-+
-+ int ret;
-+ int i;
-+
-+ simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
-+ if (!simple)
-+ return -ENOMEM;
-+
-+ ret = of_clk_get_parent_count(np);
-+ if (ret < 0)
-+ return ret;
-+
-+ simple->num_clocks = ret;
-+
-+ simple->clks = devm_kcalloc(dev, simple->num_clocks,
-+ sizeof(struct clk *), GFP_KERNEL);
-+ if (!simple->clks)
-+ return -ENOMEM;
-+
-+ simple->dev = dev;
-+
-+ for (i = 0; i < simple->num_clocks; i++) {
-+ struct clk *clk;
-+
-+ clk = of_clk_get(np, i);
-+ if (IS_ERR(clk)) {
-+ while (--i >= 0)
-+ clk_put(simple->clks[i]);
-+ return PTR_ERR(clk);
-+ }
-+
-+ ret = clk_prepare_enable(clk);
-+ if (ret < 0) {
-+ while (--i >= 0) {
-+ clk_disable_unprepare(simple->clks[i]);
-+ clk_put(simple->clks[i]);
-+ }
-+ clk_put(clk);
-+
-+ return ret;
-+ }
-+
-+ simple->clks[i] = clk;
-+ }
-+
-+ ret = of_platform_populate(np, NULL, NULL, dev);
-+ if (ret) {
-+ for (i = 0; i < simple->num_clocks; i++) {
-+ clk_disable_unprepare(simple->clks[i]);
-+ clk_put(simple->clks[i]);
-+ }
-+
-+ return ret;
-+ }
-+
-+ pm_runtime_set_active(dev);
-+ pm_runtime_enable(dev);
-+ pm_runtime_get_sync(dev);
-+
-+ return 0;
-+}
-+
-+static int dwc3_of_simple_remove(struct platform_device *pdev)
-+{
-+ struct dwc3_of_simple *simple = platform_get_drvdata(pdev);
-+ struct device *dev = &pdev->dev;
-+ int i;
-+
-+ for (i = 0; i < simple->num_clocks; i++) {
-+ clk_unprepare(simple->clks[i]);
-+ clk_put(simple->clks[i]);
-+ }
-+
-+ of_platform_depopulate(dev);
-+
-+ pm_runtime_put_sync(dev);
-+ pm_runtime_disable(dev);
-+
-+ return 0;
-+}
-+
-+static int dwc3_of_simple_runtime_suspend(struct device *dev)
-+{
-+ struct dwc3_of_simple *simple = dev_get_drvdata(dev);
-+ int i;
-+
-+ for (i = 0; i < simple->num_clocks; i++)
-+ clk_disable(simple->clks[i]);
-+
-+ return 0;
-+}
-+
-+static int dwc3_of_simple_runtime_resume(struct device *dev)
-+{
-+ struct dwc3_of_simple *simple = dev_get_drvdata(dev);
-+ int ret;
-+ int i;
-+
-+ for (i = 0; i < simple->num_clocks; i++) {
-+ ret = clk_enable(simple->clks[i]);
-+ if (ret < 0) {
-+ while (--i >= 0)
-+ clk_disable(simple->clks[i]);
-+ return ret;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
-+ SET_RUNTIME_PM_OPS(dwc3_of_simple_runtime_suspend,
-+ dwc3_of_simple_runtime_resume, NULL)
-+};
-+
-+static const struct of_device_id of_dwc3_simple_match[] = {
-+ { .compatible = "qcom,dwc3" },
-+ { .compatible = "xlnx,zynqmp-dwc3" },
-+ { /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
-+
-+static struct platform_driver dwc3_of_simple_driver = {
-+ .probe = dwc3_of_simple_probe,
-+ .remove = dwc3_of_simple_remove,
-+ .driver = {
-+ .name = "dwc3-of-simple",
-+ .of_match_table = of_dwc3_simple_match,
-+ },
-+};
-+
-+module_platform_driver(dwc3_of_simple_driver);
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("DesignWare USB3 OF Simple Glue Layer");
-+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
diff --git a/target/linux/ipq806x/patches-4.4/097-2-usb-dwc3-of-simple-fix-build-warning-on-PM.patch b/target/linux/ipq806x/patches-4.4/097-2-usb-dwc3-of-simple-fix-build-warning-on-PM.patch
deleted file mode 100644
index b982c82367..0000000000
--- a/target/linux/ipq806x/patches-4.4/097-2-usb-dwc3-of-simple-fix-build-warning-on-PM.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 131386d63ca3177d471aa93808c69b85fdac520d Mon Sep 17 00:00:00 2001
-From: Felipe Balbi <balbi@ti.com>
-Date: Tue, 22 Dec 2015 21:56:10 -0600
-Subject: [PATCH] usb: dwc3: of-simple: fix build warning on !PM
-
-if we have a !PM kernel build, our runtime
-suspend/resume callbacks will be left defined but
-unused. Add a ifdef CONFIG_PM guard.
-
-Signed-off-by: Felipe Balbi <balbi@ti.com>
-(cherry picked from commit 5072cfc40a80cea3749fd3413b3896630d8c787e)
-
-Change-Id: I088186c33aa917ec8da2985372ceefc289b24242
-Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
----
- drivers/usb/dwc3/dwc3-of-simple.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/usb/dwc3/dwc3-of-simple.c
-+++ b/drivers/usb/dwc3/dwc3-of-simple.c
-@@ -122,6 +122,7 @@ static int dwc3_of_simple_remove(struct
- return 0;
- }
-
-+#ifdef CONFIG_PM
- static int dwc3_of_simple_runtime_suspend(struct device *dev)
- {
- struct dwc3_of_simple *simple = dev_get_drvdata(dev);
-@@ -150,6 +151,7 @@ static int dwc3_of_simple_runtime_resume
-
- return 0;
- }
-+#endif
-
- static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
- SET_RUNTIME_PM_OPS(dwc3_of_simple_runtime_suspend,
diff --git a/target/linux/ipq806x/patches-4.4/097-3-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch b/target/linux/ipq806x/patches-4.4/097-3-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch
deleted file mode 100644
index 32f9e34177..0000000000
--- a/target/linux/ipq806x/patches-4.4/097-3-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 07c8b15688055d81ac8e1c8c964b9e4c302287f1 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Mon, 22 Feb 2016 11:12:47 -0800
-Subject: [PATCH] usb: dwc3: Remove impossible check for
- of_clk_get_parent_count() < 0
-
-The check for < 0 is impossible now that
-of_clk_get_parent_count() returns an unsigned int. Simplify the
-code and update the types.
-
-Acked-by: Felipe Balbi <balbi@kernel.org>
-Cc: <linux-usb@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-(cherry picked from commit 3d755dcc20dd452b52532eca17da40ebbd12aee9)
-
-Change-Id: Iaa38e064d801fb36c855fea51c0443840368e0d3
-Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
----
- drivers/usb/dwc3/dwc3-of-simple.c | 9 +++++----
- 1 file changed, 5 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/dwc3/dwc3-of-simple.c
-+++ b/drivers/usb/dwc3/dwc3-of-simple.c
-@@ -42,6 +42,7 @@ static int dwc3_of_simple_probe(struct p
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
-
-+ unsigned int count;
- int ret;
- int i;
-
-@@ -49,11 +50,11 @@ static int dwc3_of_simple_probe(struct p
- if (!simple)
- return -ENOMEM;
-
-- ret = of_clk_get_parent_count(np);
-- if (ret < 0)
-- return ret;
-+ count = of_clk_get_parent_count(np);
-+ if (!count)
-+ return -ENOENT;
-
-- simple->num_clocks = ret;
-+ simple->num_clocks = count;
-
- simple->clks = devm_kcalloc(dev, simple->num_clocks,
- sizeof(struct clk *), GFP_KERNEL);
diff --git a/target/linux/ipq806x/patches-4.4/097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch b/target/linux/ipq806x/patches-4.4/097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch
deleted file mode 100644
index 2d18e41514..0000000000
--- a/target/linux/ipq806x/patches-4.4/097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 4c4f106c032ff32b89c98a4d819e68e6e643c14e Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyj.lk@gmail.com>
-Date: Tue, 26 Jul 2016 14:47:00 +0000
-Subject: usb: dwc3: fix missing platform_set_drvdata() in
- dwc3_of_simple_probe()
-
-Add missing platform_set_drvdata() in dwc3_of_simple_probe(), otherwise
-calling platform_get_drvdata() in remove returns NULL.
-
-This is detected by Coccinelle semantic patch.
-
-Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/dwc3/dwc3-of-simple.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/usb/dwc3/dwc3-of-simple.c
-+++ b/drivers/usb/dwc3/dwc3-of-simple.c
-@@ -61,6 +61,7 @@ static int dwc3_of_simple_probe(struct p
- if (!simple->clks)
- return -ENOMEM;
-
-+ platform_set_drvdata(pdev, simple);
- simple->dev = dev;
-
- for (i = 0; i < simple->num_clocks; i++) {
diff --git a/target/linux/ipq806x/patches-4.4/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch b/target/linux/ipq806x/patches-4.4/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch
deleted file mode 100644
index 0da1927b44..0000000000
--- a/target/linux/ipq806x/patches-4.4/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch
+++ /dev/null
@@ -1,512 +0,0 @@
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -390,4 +390,15 @@ config PHY_CYGNUS_PCIE
- Enable this to support the Broadcom Cygnus PCIe PHY.
- If unsure, say N.
-
-+config PHY_QCOM_DWC3
-+ tristate "QCOM DWC3 USB PHY support"
-+ depends on ARCH_QCOM
-+ depends on HAS_IOMEM
-+ depends on OF
-+ select GENERIC_PHY
-+ help
-+ This option enables support for the Synopsis PHYs present inside the
-+ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS
-+ PHY controllers.
-+
- endmenu
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1
- obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
- obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
- obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
-+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o
---- /dev/null
-+++ b/drivers/phy/phy-qcom-dwc3.c
-@@ -0,0 +1,484 @@
-+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+* This program is distributed in the hope that it will be useful,
-+* but WITHOUT ANY WARRANTY; without even the implied warranty of
-+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+* GNU General Public License for more details.
-+*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+/**
-+ * USB QSCRATCH Hardware registers
-+ */
-+#define QSCRATCH_GENERAL_CFG (0x08)
-+#define HSUSB_PHY_CTRL_REG (0x10)
-+
-+/* PHY_CTRL_REG */
-+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
-+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
-+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
-+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
-+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
-+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
-+#define HSUSB_CTRL_COMMONONN BIT(11)
-+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
-+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
-+#define HSUSB_CTRL_CLAMP_EN BIT(7)
-+#define HSUSB_CTRL_RETENABLEN BIT(1)
-+#define HSUSB_CTRL_POR BIT(0)
-+
-+/* QSCRATCH_GENERAL_CFG */
-+#define HSUSB_GCFG_XHCI_REV BIT(2)
-+
-+/**
-+ * USB QSCRATCH Hardware registers
-+ */
-+#define SSUSB_PHY_CTRL_REG (0x00)
-+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
-+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
-+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
-+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
-+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
-+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
-+#define CR_PROTOCOL_READ_REG (0x1c)
-+#define CR_PROTOCOL_WRITE_REG (0x20)
-+
-+/* PHY_CTRL_REG */
-+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
-+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
-+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
-+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
-+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
-+
-+/* SSPHY control registers */
-+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane)
-+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane)
-+
-+/* RX OVRD IN HI bits */
-+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
-+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
-+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
-+#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700
-+#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8
-+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
-+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018
-+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
-+#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003
-+
-+/* TX OVRD DRV LO register bits */
-+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F
-+#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80
-+#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7
-+#define TX_OVRD_DRV_LO_EN BIT(14)
-+
-+/* SS CAP register bits */
-+#define SS_CR_CAP_ADDR_REG BIT(0)
-+#define SS_CR_CAP_DATA_REG BIT(0)
-+#define SS_CR_READ_REG BIT(0)
-+#define SS_CR_WRITE_REG BIT(0)
-+
-+struct qcom_dwc3_usb_phy {
-+ void __iomem *base;
-+ struct device *dev;
-+ struct clk *xo_clk;
-+ struct clk *ref_clk;
-+};
-+
-+struct qcom_dwc3_phy_drvdata {
-+ struct phy_ops ops;
-+ u32 clk_rate;
-+};
-+
-+/**
-+ * Write register and read back masked value to confirm it is written
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @offset - register offset.
-+ * @mask - register bitmask specifying what should be updated
-+ * @val - value to write.
-+ */
-+static inline void qcom_dwc3_phy_write_readback(
-+ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
-+ const u32 mask, u32 val)
-+{
-+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
-+
-+ tmp &= ~mask; /* retain other bits */
-+ write_val = tmp | val;
-+
-+ writel(write_val, phy_dwc3->base + offset);
-+
-+ /* Read back to see if val was written */
-+ tmp = readl(phy_dwc3->base + offset);
-+ tmp &= mask; /* clear other bits */
-+
-+ if (tmp != val)
-+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
-+ val, offset);
-+}
-+
-+static int wait_for_latch(void __iomem *addr)
-+{
-+ u32 retry = 10;
-+
-+ while (true) {
-+ if (!readl(addr))
-+ break;
-+
-+ if (--retry == 0)
-+ return -ETIMEDOUT;
-+
-+ usleep_range(10, 20);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * Write SSPHY register
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to write.
-+ * @val - value to write.
-+ */
-+static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3,
-+ u32 addr, u32 val)
-+{
-+ int ret;
-+
-+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_ADDR_REG, phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_DATA_REG, phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
-+
-+err_wait:
-+ if (ret)
-+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
-+ return ret;
-+}
-+
-+/**
-+ * Read SSPHY register.
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to read.
-+ */
-+static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val)
-+{
-+ int ret;
-+
-+ writel(addr, base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_ADDR_REG, base + CR_PROTOCOL_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /*
-+ * Due to hardware bug, first read of SSPHY register might be
-+ * incorrect. Hence as workaround, SW should perform SSPHY register
-+ * read twice, but use only second read and ignore first read.
-+ */
-+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /* throwaway read */
-+ readl(base + CR_PROTOCOL_DATA_OUT_REG);
-+
-+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ *val = readl(base + CR_PROTOCOL_DATA_OUT_REG);
-+
-+err_wait:
-+ return ret;
-+}
-+
-+static int qcom_dwc3_phy_power_on(struct phy *phy)
-+{
-+ int ret;
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret)
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return ret;
-+}
-+
-+static int qcom_dwc3_phy_power_off(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_hs_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ u32 val;
-+
-+ /*
-+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
-+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
-+ */
-+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
-+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
-+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
-+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
-+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
-+
-+ /* use core clock if external reference is not present */
-+ if (!phy_dwc3->xo_clk)
-+ val |= HSUSB_CTRL_USE_CLKCORE;
-+
-+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
-+ usleep_range(2000, 2200);
-+
-+ /* Disable (bypass) VBUS and ID filters */
-+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_ss_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 data = 0;
-+
-+ /* reset phy */
-+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
-+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+ usleep_range(2000, 2200);
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /* clear REF_PAD if we don't have XO clk */
-+ if (!phy_dwc3->xo_clk)
-+ data &= ~SSUSB_CTRL_REF_USE_PAD;
-+ else
-+ data |= SSUSB_CTRL_REF_USE_PAD;
-+
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /* wait for ref clk to become stable, this can take up to 30ms */
-+ msleep(30);
-+
-+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /*
-+ * Fix RX Equalization setting as follows
-+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
-+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
-+ data |= 0x3 << RX_OVRD_IN_HI_RX_EQ_SHIFT;
-+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Set EQ and TX launch amplitudes as follows
-+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
-+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
-+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
-+ data |= 0x16 << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
-+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
-+ data |= 0x7f;
-+ data |= TX_OVRD_DRV_LO_EN;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
-+ * TX_FULL_SWING [26:20] amplitude to 127
-+ * TX_DEEMPH_3_5DB [13:8] to 22
-+ * LOS_BIAS [2:0] to 0x5
-+ */
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
-+ 0x07f03f07, 0x07f01605);
-+
-+err_phy_trans:
-+ return ret;
-+}
-+
-+static int qcom_dwc3_ss_phy_exit(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ /* Sequence to put SSPHY in low power state:
-+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
-+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
-+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
-+ */
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_SS_PHY_EN, 0x0);
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_REF_USE_PAD, 0x0);
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ 0x0, SSUSB_CTRL_TEST_POWERDOWN);
-+
-+ return 0;
-+}
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
-+ .ops = {
-+ .init = qcom_dwc3_hs_phy_init,
-+ .power_on = qcom_dwc3_phy_power_on,
-+ .power_off = qcom_dwc3_phy_power_off,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 60000000,
-+};
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = {
-+ .ops = {
-+ .init = qcom_dwc3_ss_phy_init,
-+ .exit = qcom_dwc3_ss_phy_exit,
-+ .power_on = qcom_dwc3_phy_power_on,
-+ .power_off = qcom_dwc3_phy_power_off,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 125000000,
-+};
-+
-+static const struct of_device_id qcom_dwc3_phy_table[] = {
-+ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata },
-+ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata },
-+ { /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
-+
-+static int qcom_dwc3_phy_probe(struct platform_device *pdev)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3;
-+ struct phy_provider *phy_provider;
-+ struct phy *generic_phy;
-+ struct resource *res;
-+ const struct of_device_id *match;
-+ const struct qcom_dwc3_phy_drvdata *data;
-+
-+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
-+ if (!phy_dwc3)
-+ return -ENOMEM;
-+
-+ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node);
-+ data = match->data;
-+
-+ phy_dwc3->dev = &pdev->dev;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res);
-+ if (IS_ERR(phy_dwc3->base))
-+ return PTR_ERR(phy_dwc3->base);
-+
-+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
-+ if (IS_ERR(phy_dwc3->ref_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
-+ return PTR_ERR(phy_dwc3->ref_clk);
-+ }
-+
-+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
-+
-+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
-+ if (IS_ERR(phy_dwc3->xo_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
-+ phy_dwc3->xo_clk = NULL;
-+ }
-+
-+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
-+ &data->ops);
-+
-+ if (IS_ERR(generic_phy))
-+ return PTR_ERR(generic_phy);
-+
-+ phy_set_drvdata(generic_phy, phy_dwc3);
-+ platform_set_drvdata(pdev, phy_dwc3);
-+
-+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
-+ of_phy_simple_xlate);
-+
-+ if (IS_ERR(phy_provider))
-+ return PTR_ERR(phy_provider);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver qcom_dwc3_phy_driver = {
-+ .probe = qcom_dwc3_phy_probe,
-+ .driver = {
-+ .name = "qcom-dwc3-usb-phy",
-+ .owner = THIS_MODULE,
-+ .of_match_table = qcom_dwc3_phy_table,
-+ },
-+};
-+
-+module_platform_driver(qcom_dwc3_phy_driver);
-+
-+MODULE_ALIAS("platform:phy-qcom-dwc3");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
-+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
diff --git a/target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch b/target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
deleted file mode 100644
index d1f19c367e..0000000000
--- a/target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
+++ /dev/null
@@ -1,123 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -92,5 +92,29 @@
- sata@29000000 {
- status = "ok";
- };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+ };
- };
- };
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -333,6 +333,88 @@
- compatible = "syscon";
- reg = <0x01200600 0x100>;
- };
-+
-+ hs_phy_1: phy@100f8800 {
-+ compatible = "qcom,dwc3-hs-usb-phy";
-+ reg = <0x100f8800 0x30>;
-+ clocks = <&gcc USB30_1_UTMI_CLK>;
-+ clock-names = "ref";
-+ #phy-cells = <0>;
-+
-+ status = "disabled";
-+ };
-+
-+ ss_phy_1: phy@100f8830 {
-+ compatible = "qcom,dwc3-ss-usb-phy";
-+ reg = <0x100f8830 0x30>;
-+ clocks = <&gcc USB30_1_MASTER_CLK>;
-+ clock-names = "ref";
-+ #phy-cells = <0>;
-+
-+ status = "disabled";
-+ };
-+
-+ hs_phy_0: phy@110f8800 {
-+ compatible = "qcom,dwc3-hs-usb-phy";
-+ reg = <0x110f8800 0x30>;
-+ clocks = <&gcc USB30_0_UTMI_CLK>;
-+ clock-names = "ref";
-+ #phy-cells = <0>;
-+
-+ status = "disabled";
-+ };
-+
-+ ss_phy_0: phy@110f8830 {
-+ compatible = "qcom,dwc3-ss-usb-phy";
-+ reg = <0x110f8830 0x30>;
-+ clocks = <&gcc USB30_0_MASTER_CLK>;
-+ clock-names = "ref";
-+ #phy-cells = <0>;
-+
-+ status = "disabled";
-+ };
-+
-+ usb3_0: usb30@0 {
-+ compatible = "qcom,dwc3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc USB30_0_MASTER_CLK>;
-+ clock-names = "core";
-+
-+ ranges;
-+
-+ status = "disabled";
-+
-+ dwc3@11000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x11000000 0xcd00>;
-+ interrupts = <0 110 0x4>;
-+ phys = <&hs_phy_0>, <&ss_phy_0>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ dr_mode = "host";
-+ };
-+ };
-+
-+ usb3_1: usb30@1 {
-+ compatible = "qcom,dwc3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc USB30_1_MASTER_CLK>;
-+ clock-names = "core";
-+
-+ ranges;
-+
-+ status = "disabled";
-+
-+ dwc3@10000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x10000000 0xcd00>;
-+ interrupts = <0 205 0x4>;
-+ phys = <&hs_phy_1>, <&ss_phy_1>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ dr_mode = "host";
-+ };
-+ };
- };
-
- sfpb_mutex: sfpb-mutex {
diff --git a/target/linux/ipq806x/patches-4.4/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch b/target/linux/ipq806x/patches-4.4/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch
deleted file mode 100644
index 41f91fae7c..0000000000
--- a/target/linux/ipq806x/patches-4.4/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2,3/5] DT: PCI: qcom: Document PCIe devicetree bindings
-From: Stanimir Varbanov <svarbanov@mm-sol.com>
-X-Patchwork-Id: 6326181
-Message-Id: <1430743338-10441-4-git-send-email-svarbanov@mm-sol.com>
-To: Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>,
- Mark Rutland <mark.rutland@arm.com>,
- Grant Likely <grant.likely@linaro.org>,
- Bjorn Helgaas <bhelgaas@google.com>,
- Kishon Vijay Abraham I <kishon@ti.com>,
- Russell King <linux@arm.linux.org.uk>, Arnd Bergmann <arnd@arndb.de>
-Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
- linux-pci@vger.kernel.org, Mathieu Olivari <mathieu@codeaurora.org>,
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
- Stanimir Varbanov <svarbanov@mm-sol.com>
-Date: Mon, 4 May 2015 15:42:16 +0300
-
-Document Qualcomm PCIe driver devicetree bindings.
-
-Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
-
----
-.../devicetree/bindings/pci/qcom,pcie.txt | 231 ++++++++++++++++++++
- 1 files changed, 231 insertions(+), 0 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
-@@ -0,0 +1,231 @@
-+* Qualcomm PCI express root complex
-+
-+- compatible:
-+ Usage: required
-+ Value type: <stringlist>
-+ Definition: Value shall include
-+ - "qcom,pcie-v0" for apq/ipq8064
-+ - "qcom,pcie-v1" for apq8084
-+
-+- reg:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: Register ranges as listed in the reg-names property
-+
-+- reg-names:
-+ Usage: required
-+ Value type: <stringlist>
-+ Definition: Must include the following entries
-+ - "parf" Qualcomm specific registers
-+ - "dbi" Designware PCIe registers
-+ - "elbi" External local bus interface registers
-+ - "config" PCIe configuration space
-+
-+- device_type:
-+ Usage: required
-+ Value type: <string>
-+ Definition: Should be "pci". As specified in designware-pcie.txt
-+
-+- #address-cells:
-+ Usage: required
-+ Value type: <u32>
-+ Definition: Should be set to 3. As specified in designware-pcie.txt
-+
-+- #size-cells:
-+ Usage: required
-+ Value type: <u32>
-+ Definition: Should be set 2. As specified in designware-pcie.txt
-+
-+- ranges:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: As specified in designware-pcie.txt
-+
-+- interrupts:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: MSI interrupt
-+
-+- interrupt-names:
-+ Usage: required
-+ Value type: <stringlist>
-+ Definition: Should contain "msi"
-+
-+- #interrupt-cells:
-+ Usage: required
-+ Value type: <u32>
-+ Definition: Should be 1. As specified in designware-pcie.txt
-+
-+- interrupt-map-mask:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: As specified in designware-pcie.txt
-+
-+- interrupt-map:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: As specified in designware-pcie.txt
-+
-+- clocks:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: List of phandle and clock specifier pairs as listed
-+ in clock-names property
-+
-+- clock-names:
-+ Usage: required
-+ Value type: <stringlist>
-+ Definition: Should contain the following entries
-+ * should be populated for v0 and v1
-+ - "iface" Configuration AHB clock
-+
-+ * should be populated for v0
-+ - "core" Clocks the pcie hw block
-+ - "phy" Clocks the pcie PHY block
-+
-+ * should be populated for v1
-+ - "aux" Auxiliary (AUX) clock
-+ - "bus_master" Master AXI clock
-+ - "bus_slave" Slave AXI clock
-+
-+- resets:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: List of phandle and reset specifier pairs as listed
-+ in reset-names property
-+
-+- reset-names:
-+ Usage: required
-+ Value type: <stringlist>
-+ Definition: Should contain the following entries
-+ * should be populated for v0
-+ - "axi" AXI reset
-+ - "ahb" AHB reset
-+ - "por" POR reset
-+ - "pci" PCI reset
-+ - "phy" PHY reset
-+
-+ * should be populated for v1
-+ - "core" Core reset
-+
-+- power-domains:
-+ Usage: required (for v1 only)
-+ Value type: <prop-encoded-array>
-+ Definition: A phandle and power domain specifier pair to the
-+ power domain which is responsible for collapsing
-+ and restoring power to the peripheral
-+
-+- <name>-supply:
-+ Usage: required
-+ Value type: <phandle>
-+ Definition: List of phandles to the power supply regulator(s)
-+ * should be populated for v0 and v1
-+ - "vdda" core analog power supply
-+
-+ * should be populated for v0
-+ - "vdda_phy" analog power supply for PHY
-+ - "vdda_refclk" analog power supply for IC which generate
-+ reference clock
-+
-+- phys:
-+ Usage: required (for v1 only)
-+ Value type: <phandle>
-+ Definition: List of phandle(s) as listed in phy-names property
-+
-+- phy-names:
-+ Usage: required (for v1 only)
-+ Value type: <stringlist>
-+ Definition: Should contain "pciephy"
-+
-+- <name>-gpio:
-+ Usage: optional
-+ Value type: <prop-encoded-array>
-+ Definition: List of phandle and gpio specifier pairs. Should contain
-+ - "perst" PCIe endpoint reset signal line
-+ - "pewake" PCIe endpoint wake signal line
-+
-+- pinctrl-0:
-+ Usage: required
-+ Value type: <phandle>
-+ Definition: List of phandles pointing at a pin(s) configuration
-+
-+- pinctrl-names
-+ Usage: required
-+ Value type: <stringlist>
-+ Definition: List of names of pinctrl-0 state
-+
-+* Example for v0
-+ pcie0: pci@1b500000 {
-+ compatible = "qcom,pcie-v0";
-+ reg = <0x1b500000 0x1000
-+ 0x1b502000 0x80
-+ 0x1b600000 0x100
-+ 0x0ff00000 0x100000>;
-+ reg-names = "dbi", "elbi", "parf", "config";
-+ device_type = "pci";
-+ linux,pci-domain = <0>;
-+ bus-range = <0x00 0xff>;
-+ num-lanes = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
-+ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* memory */
-+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi";
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-+ clocks = <&gcc PCIE_A_CLK>,
-+ <&gcc PCIE_H_CLK>,
-+ <&gcc PCIE_PHY_CLK>;
-+ clock-names = "core", "iface", "phy";
-+ resets = <&gcc PCIE_ACLK_RESET>,
-+ <&gcc PCIE_HCLK_RESET>,
-+ <&gcc PCIE_POR_RESET>,
-+ <&gcc PCIE_PCI_RESET>,
-+ <&gcc PCIE_PHY_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy";
-+ };
-+
-+* Example for v1
-+ pcie0@fc520000 {
-+ compatible = "qcom,pcie-v1";
-+ reg = <0xfc520000 0x2000>,
-+ <0xff000000 0x1000>,
-+ <0xff001000 0x1000>,
-+ <0xff002000 0x2000>;
-+ reg-names = "parf", "dbi", "elbi", "config";
-+ device_type = "pci";
-+ linux,pci-domain = <0>;
-+ bus-range = <0x00 0xff>;
-+ num-lanes = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */
-+ 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
-+ interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi";
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-+ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-+ <&gcc GCC_PCIE_0_AUX_CLK>;
-+ clock-names = "iface", "master_bus", "slave_bus", "aux";
-+ resets = <&gcc GCC_PCIE_0_BCR>;
-+ reset-names = "core";
-+ power-domains = <&gcc PCIE0_GDSC>;
-+ vdda-supply = <&pma8084_l3>;
-+ phys = <&pciephy0>;
-+ phy-names = "pciephy";
-+ perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie0_pins_default>;
-+ pinctrl-names = "default";
-+ };
diff --git a/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch b/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
deleted file mode 100644
index b140787ac7..0000000000
--- a/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
+++ /dev/null
@@ -1,752 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2,4/5] PCI: qcom: Add Qualcomm PCIe controller driver
-From: Stanimir Varbanov <svarbanov@mm-sol.com>
-X-Patchwork-Id: 6326161
-Message-Id: <1430743338-10441-5-git-send-email-svarbanov@mm-sol.com>
-To: Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>,
- Mark Rutland <mark.rutland@arm.com>,
- Grant Likely <grant.likely@linaro.org>,
- Bjorn Helgaas <bhelgaas@google.com>,
- Kishon Vijay Abraham I <kishon@ti.com>,
- Russell King <linux@arm.linux.org.uk>, Arnd Bergmann <arnd@arndb.de>
-Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
- linux-pci@vger.kernel.org, Mathieu Olivari <mathieu@codeaurora.org>,
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
- Stanimir Varbanov <svarbanov@mm-sol.com>
-Date: Mon, 4 May 2015 15:42:17 +0300
-
-The PCIe driver reuse the Designware common code for host
-and MSI initialization, and also program the Qualcomm
-application specific registers.
-
-Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
-
----
-MAINTAINERS | 7 +
- drivers/pci/host/Kconfig | 9 +
- drivers/pci/host/Makefile | 1 +
- drivers/pci/host/pcie-qcom.c | 677 ++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 694 insertions(+), 0 deletions(-)
- create mode 100644 drivers/pci/host/pcie-qcom.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -8248,6 +8248,13 @@ S: Maintained
- F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
- F: drivers/pci/host/pcie-hisi.c
-
-+PCIE DRIVER FOR QUALCOMM MSM
-+M: Stanimir Varbanov <svarbanov@mm-sol.com>
-+L: linux-pci@vger.kernel.org
-+L: linux-arm-msm@vger.kernel.org
-+S: Maintained
-+F: drivers/pci/host/*qcom*
-+
- PCMCIA SUBSYSTEM
- P: Linux PCMCIA Team
- L: linux-pcmcia@lists.infradead.org
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -173,4 +173,13 @@ config PCI_HISI
- help
- Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
-
-+config PCIE_QCOM
-+ bool "Qualcomm PCIe controller"
-+ depends on ARCH_QCOM && OF || (ARM && COMPILE_TEST)
-+ select PCIE_DW
-+ select PCIEPORTBUS
-+ help
-+ Say Y here to enable PCIe controller support on Qualcomm SoCs. The
-+ PCIe controller use Designware core plus Qualcomm specific hardware
-+ wrappers.
- endmenu
---- /dev/null
-+++ b/drivers/pci/host/pcie-qcom.c
-@@ -0,0 +1,676 @@
-+/*
-+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_gpio.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/reset.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+
-+#include "pcie-designware.h"
-+
-+#define PCIE20_PARF_PHY_CTRL 0x40
-+#define PCIE20_PARF_PHY_REFCLK 0x4C
-+#define PCIE20_PARF_DBI_BASE_ADDR 0x168
-+#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
-+#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
-+
-+#define PCIE20_ELBI_SYS_CTRL 0x04
-+#define PCIE20_ELBI_SYS_STTS 0x08
-+#define XMLH_LINK_UP BIT(10)
-+
-+#define PCIE20_CAP 0x70
-+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
-+
-+#define PERST_DELAY_MIN_US 1000
-+#define PERST_DELAY_MAX_US 1005
-+
-+#define LINKUP_DELAY_MIN_US 5000
-+#define LINKUP_DELAY_MAX_US 5100
-+#define LINKUP_RETRIES_COUNT 20
-+
-+#define PCIE_V0 0 /* apq8064 */
-+#define PCIE_V1 1 /* apq8084 */
-+
-+struct qcom_pcie_resources_v0 {
-+ struct clk *iface_clk;
-+ struct clk *core_clk;
-+ struct clk *phy_clk;
-+ struct reset_control *pci_reset;
-+ struct reset_control *axi_reset;
-+ struct reset_control *ahb_reset;
-+ struct reset_control *por_reset;
-+ struct reset_control *phy_reset;
-+ struct regulator *vdda;
-+ struct regulator *vdda_phy;
-+ struct regulator *vdda_refclk;
-+};
-+
-+struct qcom_pcie_resources_v1 {
-+ struct clk *iface;
-+ struct clk *aux;
-+ struct clk *master_bus;
-+ struct clk *slave_bus;
-+ struct reset_control *core;
-+ struct regulator *vdda;
-+};
-+
-+union pcie_resources {
-+ struct qcom_pcie_resources_v0 v0;
-+ struct qcom_pcie_resources_v1 v1;
-+};
-+
-+struct qcom_pcie {
-+ struct pcie_port pp;
-+ struct device *dev;
-+ union pcie_resources res;
-+ void __iomem *parf;
-+ void __iomem *dbi;
-+ void __iomem *elbi;
-+ struct phy *phy;
-+ struct gpio_desc *reset;
-+ unsigned int version;
-+};
-+
-+#define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp)
-+
-+static inline void
-+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
-+{
-+ u32 val = readl(addr);
-+
-+ val &= ~clear_mask;
-+ val |= set_mask;
-+ writel(val, addr);
-+}
-+
-+static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert)
-+{
-+ int val, active_low;
-+
-+ if (IS_ERR_OR_NULL(pcie->reset))
-+ return;
-+
-+ active_low = gpiod_is_active_low(pcie->reset);
-+
-+ if (assert)
-+ val = !!active_low;
-+ else
-+ val = !active_low;
-+
-+ gpiod_set_value(pcie->reset, val);
-+
-+ usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US);
-+}
-+
-+static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
-+{
-+ qcom_ep_reset_assert_deassert(pcie, 1);
-+}
-+
-+static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
-+{
-+ qcom_ep_reset_assert_deassert(pcie, 0);
-+}
-+
-+static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
-+{
-+ struct pcie_port *pp = arg;
-+
-+ return dw_handle_msi_irq(pp);
-+}
-+
-+static int qcom_pcie_link_up(struct pcie_port *pp)
-+{
-+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
-+ u32 val = readl(pcie->dbi + PCIE20_CAP_LINKCTRLSTATUS);
-+
-+ return val & BIT(29) ? 1 : 0;
-+}
-+
-+static void qcom_pcie_disable_resources_v0(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
-+
-+ reset_control_assert(res->pci_reset);
-+ reset_control_assert(res->axi_reset);
-+ reset_control_assert(res->ahb_reset);
-+ reset_control_assert(res->por_reset);
-+ reset_control_assert(res->pci_reset);
-+ clk_disable_unprepare(res->iface_clk);
-+ clk_disable_unprepare(res->core_clk);
-+ clk_disable_unprepare(res->phy_clk);
-+ regulator_disable(res->vdda);
-+ regulator_disable(res->vdda_phy);
-+ regulator_disable(res->vdda_refclk);
-+}
-+
-+static void qcom_pcie_disable_resources_v1(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
-+
-+ reset_control_assert(res->core);
-+ clk_disable_unprepare(res->slave_bus);
-+ clk_disable_unprepare(res->master_bus);
-+ clk_disable_unprepare(res->iface);
-+ clk_disable_unprepare(res->aux);
-+ regulator_disable(res->vdda);
-+}
-+
-+static int qcom_pcie_enable_resources_v0(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
-+ struct device *dev = pcie->dev;
-+ int ret;
-+
-+ ret = regulator_enable(res->vdda);
-+ if (ret) {
-+ dev_err(dev, "cannot enable vdda regulator\n");
-+ return ret;
-+ }
-+
-+ ret = regulator_enable(res->vdda_refclk);
-+ if (ret) {
-+ dev_err(dev, "cannot enable vdda_refclk regulator\n");
-+ goto err_refclk;
-+ }
-+
-+ ret = regulator_enable(res->vdda_phy);
-+ if (ret) {
-+ dev_err(dev, "cannot enable vdda_phy regulator\n");
-+ goto err_vdda_phy;
-+ }
-+
-+ ret = clk_prepare_enable(res->iface_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable iface clock\n");
-+ goto err_iface;
-+ }
-+
-+ ret = clk_prepare_enable(res->core_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable core clock\n");
-+ goto err_clk_core;
-+ }
-+
-+ ret = clk_prepare_enable(res->phy_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable phy clock\n");
-+ goto err_clk_phy;
-+ }
-+
-+ ret = reset_control_deassert(res->ahb_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot deassert ahb reset\n");
-+ goto err_reset_ahb;
-+ }
-+
-+ return 0;
-+
-+err_reset_ahb:
-+ clk_disable_unprepare(res->phy_clk);
-+err_clk_phy:
-+ clk_disable_unprepare(res->core_clk);
-+err_clk_core:
-+ clk_disable_unprepare(res->iface_clk);
-+err_iface:
-+ regulator_disable(res->vdda_phy);
-+err_vdda_phy:
-+ regulator_disable(res->vdda_refclk);
-+err_refclk:
-+ regulator_disable(res->vdda);
-+ return ret;
-+}
-+
-+static int qcom_pcie_enable_resources_v1(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
-+ struct device *dev = pcie->dev;
-+ int ret;
-+
-+ ret = reset_control_deassert(res->core);
-+ if (ret) {
-+ dev_err(dev, "cannot deassert core reset\n");
-+ return ret;
-+ }
-+
-+ ret = clk_prepare_enable(res->aux);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable aux clock\n");
-+ goto err_res;
-+ }
-+
-+ ret = clk_prepare_enable(res->iface);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable iface clock\n");
-+ goto err_aux;
-+ }
-+
-+ ret = clk_prepare_enable(res->master_bus);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable master_bus clock\n");
-+ goto err_iface;
-+ }
-+
-+ ret = clk_prepare_enable(res->slave_bus);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable slave_bus clock\n");
-+ goto err_master;
-+ }
-+
-+ ret = regulator_enable(res->vdda);
-+ if (ret) {
-+ dev_err(dev, "cannot enable vdda regulator\n");
-+ goto err_slave;
-+ }
-+
-+ return 0;
-+
-+err_slave:
-+ clk_disable_unprepare(res->slave_bus);
-+err_master:
-+ clk_disable_unprepare(res->master_bus);
-+err_iface:
-+ clk_disable_unprepare(res->iface);
-+err_aux:
-+ clk_disable_unprepare(res->aux);
-+err_res:
-+ reset_control_assert(res->core);
-+
-+ return ret;
-+}
-+
-+static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
-+ struct device *dev = pcie->dev;
-+
-+ res->vdda = devm_regulator_get(dev, "vdda");
-+ if (IS_ERR(res->vdda))
-+ return PTR_ERR(res->vdda);
-+
-+ res->vdda_phy = devm_regulator_get(dev, "vdda_phy");
-+ if (IS_ERR(res->vdda_phy))
-+ return PTR_ERR(res->vdda_phy);
-+
-+ res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk");
-+ if (IS_ERR(res->vdda_refclk))
-+ return PTR_ERR(res->vdda_refclk);
-+
-+ res->iface_clk = devm_clk_get(dev, "iface");
-+ if (IS_ERR(res->iface_clk))
-+ return PTR_ERR(res->iface_clk);
-+
-+ res->core_clk = devm_clk_get(dev, "core");
-+ if (IS_ERR(res->core_clk))
-+ return PTR_ERR(res->core_clk);
-+
-+ res->phy_clk = devm_clk_get(dev, "phy");
-+ if (IS_ERR(res->phy_clk))
-+ return PTR_ERR(res->phy_clk);
-+
-+ res->pci_reset = devm_reset_control_get(dev, "pci");
-+ if (IS_ERR(res->pci_reset))
-+ return PTR_ERR(res->pci_reset);
-+
-+ res->axi_reset = devm_reset_control_get(dev, "axi");
-+ if (IS_ERR(res->axi_reset))
-+ return PTR_ERR(res->axi_reset);
-+
-+ res->ahb_reset = devm_reset_control_get(dev, "ahb");
-+ if (IS_ERR(res->ahb_reset))
-+ return PTR_ERR(res->ahb_reset);
-+
-+ res->por_reset = devm_reset_control_get(dev, "por");
-+ if (IS_ERR(res->por_reset))
-+ return PTR_ERR(res->por_reset);
-+
-+ res->phy_reset = devm_reset_control_get(dev, "phy");
-+ if (IS_ERR(res->phy_reset))
-+ return PTR_ERR(res->phy_reset);
-+
-+ return 0;
-+}
-+
-+static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
-+{
-+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
-+ struct device *dev = pcie->dev;
-+
-+ res->vdda = devm_regulator_get(dev, "vdda");
-+ if (IS_ERR(res->vdda))
-+ return PTR_ERR(res->vdda);
-+
-+ res->iface = devm_clk_get(dev, "iface");
-+ if (IS_ERR(res->iface))
-+ return PTR_ERR(res->iface);
-+
-+ res->aux = devm_clk_get(dev, "aux");
-+ if (IS_ERR(res->aux) && PTR_ERR(res->aux) == -EPROBE_DEFER)
-+ return -EPROBE_DEFER;
-+ else if (IS_ERR(res->aux))
-+ res->aux = NULL;
-+
-+ res->master_bus = devm_clk_get(dev, "master_bus");
-+ if (IS_ERR(res->master_bus))
-+ return PTR_ERR(res->master_bus);
-+
-+ res->slave_bus = devm_clk_get(dev, "slave_bus");
-+ if (IS_ERR(res->slave_bus))
-+ return PTR_ERR(res->slave_bus);
-+
-+ res->core = devm_reset_control_get(dev, "core");
-+ if (IS_ERR(res->core))
-+ return PTR_ERR(res->core);
-+
-+ return 0;
-+}
-+
-+static int qcom_pcie_enable_link_training(struct pcie_port *pp)
-+{
-+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
-+ struct device *dev = pp->dev;
-+ int retries;
-+ u32 val;
-+
-+ /* enable link training */
-+ writel_masked(pcie->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0));
-+
-+ /* wait for up to 100ms for the link to come up */
-+ retries = LINKUP_RETRIES_COUNT;
-+ do {
-+ val = readl(pcie->elbi + PCIE20_ELBI_SYS_STTS);
-+ if (val & XMLH_LINK_UP)
-+ break;
-+ usleep_range(LINKUP_DELAY_MIN_US, LINKUP_DELAY_MAX_US);
-+ } while (retries--);
-+
-+ if (retries < 0 || !dw_pcie_link_up(pp)) {
-+ dev_err(dev, "link initialization failed\n");
-+ return -ENXIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void qcom_pcie_host_init_v1(struct pcie_port *pp)
-+{
-+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
-+ int ret;
-+
-+ qcom_ep_reset_assert(pcie);
-+
-+ ret = qcom_pcie_enable_resources_v1(pcie);
-+ if (ret)
-+ return;
-+
-+ /* change DBI base address */
-+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
-+
-+ if (IS_ENABLED(CONFIG_PCI_MSI))
-+ writel_masked(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT,
-+ 0, BIT(31));
-+
-+ ret = phy_init(pcie->phy);
-+ if (ret)
-+ goto err_res;
-+
-+ ret = phy_power_on(pcie->phy);
-+ if (ret)
-+ goto err_phy;
-+
-+ dw_pcie_setup_rc(pp);
-+
-+ if (IS_ENABLED(CONFIG_PCI_MSI))
-+ dw_pcie_msi_init(pp);
-+
-+ qcom_ep_reset_deassert(pcie);
-+
-+ ret = qcom_pcie_enable_link_training(pp);
-+ if (ret)
-+ goto err;
-+
-+ return;
-+
-+err:
-+ qcom_ep_reset_assert(pcie);
-+ phy_power_off(pcie->phy);
-+err_phy:
-+ phy_exit(pcie->phy);
-+err_res:
-+ qcom_pcie_disable_resources_v1(pcie);
-+}
-+
-+static void qcom_pcie_host_init_v0(struct pcie_port *pp)
-+{
-+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
-+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
-+ struct device *dev = pcie->dev;
-+ int ret;
-+
-+ qcom_ep_reset_assert(pcie);
-+
-+ ret = qcom_pcie_enable_resources_v0(pcie);
-+ if (ret)
-+ return;
-+
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
-+
-+ /* enable external reference clock */
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
-+
-+ ret = reset_control_deassert(res->phy_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot deassert phy reset\n");
-+ return;
-+ }
-+
-+ ret = reset_control_deassert(res->pci_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot deassert pci reset\n");
-+ return;
-+ }
-+
-+ ret = reset_control_deassert(res->por_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot deassert por reset\n");
-+ return;
-+ }
-+
-+ ret = reset_control_deassert(res->axi_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot deassert axi reset\n");
-+ return;
-+ }
-+
-+ /* wait 150ms for clock acquisition */
-+ usleep_range(10000, 15000);
-+
-+ dw_pcie_setup_rc(pp);
-+
-+ if (IS_ENABLED(CONFIG_PCI_MSI))
-+ dw_pcie_msi_init(pp);
-+
-+ qcom_ep_reset_deassert(pcie);
-+
-+ ret = qcom_pcie_enable_link_training(pp);
-+ if (ret)
-+ goto err;
-+
-+ return;
-+err:
-+ qcom_ep_reset_assert(pcie);
-+ qcom_pcie_disable_resources_v0(pcie);
-+}
-+
-+static void qcom_pcie_host_init(struct pcie_port *pp)
-+{
-+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
-+
-+ if (pcie->version == PCIE_V0)
-+ return qcom_pcie_host_init_v0(pp);
-+ else
-+ return qcom_pcie_host_init_v1(pp);
-+}
-+
-+static int
-+qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val)
-+{
-+ /* the device class is not reported correctly from the register */
-+ if (where == PCI_CLASS_REVISION && size == 4) {
-+ *val = readl(pp->dbi_base + PCI_CLASS_REVISION);
-+ *val &= ~(0xffff << 16);
-+ *val |= PCI_CLASS_BRIDGE_PCI << 16;
-+ return PCIBIOS_SUCCESSFUL;
-+ }
-+
-+ return dw_pcie_cfg_read(pp->dbi_base + where, size, val);
-+}
-+
-+static struct pcie_host_ops qcom_pcie_ops = {
-+ .link_up = qcom_pcie_link_up,
-+ .host_init = qcom_pcie_host_init,
-+ .rd_own_conf = qcom_pcie_rd_own_conf,
-+};
-+
-+static const struct of_device_id qcom_pcie_match[] = {
-+ { .compatible = "qcom,pcie-v0", .data = (void *)PCIE_V0 },
-+ { .compatible = "qcom,pcie-v1", .data = (void *)PCIE_V1 },
-+ { }
-+};
-+
-+static int qcom_pcie_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ const struct of_device_id *match;
-+ struct resource *res;
-+ struct qcom_pcie *pcie;
-+ struct pcie_port *pp;
-+ int ret;
-+
-+ match = of_match_node(qcom_pcie_match, dev->of_node);
-+ if (!match)
-+ return -ENXIO;
-+
-+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
-+ if (!pcie)
-+ return -ENOMEM;
-+
-+ pcie->version = (unsigned int)match->data;
-+
-+ pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);
-+ if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER)
-+ return PTR_ERR(pcie->reset);
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
-+ pcie->parf = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(pcie->parf))
-+ return PTR_ERR(pcie->parf);
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
-+ pcie->dbi = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(pcie->dbi))
-+ return PTR_ERR(pcie->dbi);
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
-+ pcie->elbi = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(pcie->elbi))
-+ return PTR_ERR(pcie->elbi);
-+
-+ pcie->phy = devm_phy_optional_get(dev, "pciephy");
-+ if (IS_ERR(pcie->phy))
-+ return PTR_ERR(pcie->phy);
-+
-+ pcie->dev = dev;
-+
-+ if (pcie->version == PCIE_V0)
-+ ret = qcom_pcie_get_resources_v0(pcie);
-+ else
-+ ret = qcom_pcie_get_resources_v1(pcie);
-+
-+ if (ret)
-+ return ret;
-+
-+ pp = &pcie->pp;
-+ pp->dev = dev;
-+ pp->dbi_base = pcie->dbi;
-+ pp->root_bus_nr = -1;
-+ pp->ops = &qcom_pcie_ops;
-+
-+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
-+ pp->msi_irq = platform_get_irq_byname(pdev, "msi");
-+ if (pp->msi_irq < 0) {
-+ dev_err(dev, "cannot get msi irq\n");
-+ return pp->msi_irq;
-+ }
-+
-+ ret = devm_request_irq(dev, pp->msi_irq,
-+ qcom_pcie_msi_irq_handler,
-+ IRQF_SHARED, "qcom-pcie-msi", pp);
-+ if (ret) {
-+ dev_err(dev, "cannot request msi irq\n");
-+ return ret;
-+ }
-+ }
-+
-+ ret = dw_pcie_host_init(pp);
-+ if (ret) {
-+ dev_err(dev, "cannot initialize host\n");
-+ return ret;
-+ }
-+
-+ platform_set_drvdata(pdev, pcie);
-+
-+ return 0;
-+}
-+
-+static int qcom_pcie_remove(struct platform_device *pdev)
-+{
-+ struct qcom_pcie *pcie = platform_get_drvdata(pdev);
-+
-+ qcom_ep_reset_assert(pcie);
-+ phy_power_off(pcie->phy);
-+ phy_exit(pcie->phy);
-+ if (pcie->version == PCIE_V0)
-+ qcom_pcie_disable_resources_v0(pcie);
-+ else
-+ qcom_pcie_disable_resources_v1(pcie);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver qcom_pcie_driver = {
-+ .probe = qcom_pcie_probe,
-+ .remove = qcom_pcie_remove,
-+ .driver = {
-+ .name = "qcom-pcie",
-+ .of_match_table = qcom_pcie_match,
-+ },
-+};
-+
-+module_platform_driver(qcom_pcie_driver);
-+
-+MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
-+MODULE_DESCRIPTION("Qualcomm PCIe root complex driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qcom-pcie");
---- a/drivers/pci/host/Makefile
-+++ b/drivers/pci/host/Makefile
-@@ -20,3 +20,4 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-ip
- obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
- obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
- obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
-+obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
diff --git a/target/linux/ipq806x/patches-4.4/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.4/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
deleted file mode 100644
index 90631c6694..0000000000
--- a/target/linux/ipq806x/patches-4.4/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
+++ /dev/null
@@ -1,245 +0,0 @@
-From 5b40516b2f5fb9b2a7d6d3e2e924f12ec9d183a8 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Tue, 21 Apr 2015 19:01:42 -0700
-Subject: [PATCH 8/9] ARM: dts: qcom: add pcie nodes to ipq806x platforms
-
-qcom-pcie driver now supports version 0 of the controller. This change
-adds the corresponding entries to the IPQ806x dtsi file and
-corresponding platform (AP148).
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 30 ++++++++
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 124 +++++++++++++++++++++++++++++++
- 2 files changed, 154 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -116,5 +116,15 @@
- usb30@1 {
- status = "ok";
- };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
- };
- };
---- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -128,5 +128,17 @@
- usb30@1 {
- status = "ok";
- };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ };
-+
-+ pcie2: pci@1b900000 {
-+ status = "ok";
-+ };
- };
- };
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -4,6 +4,9 @@
- #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
- #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
-+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/gpio/gpio.h>
-
- / {
- model = "Qualcomm IPQ8064";
-@@ -99,6 +102,34 @@
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 16 0x4>;
-+
-+ pcie0_pins: pcie0_pinmux {
-+ mux {
-+ pins = "gpio3";
-+ function = "pcie1_rst";
-+ drive-strength = <2>;
-+ bias-disable;
-+ };
-+ };
-+
-+ pcie1_pins: pcie1_pinmux {
-+ mux {
-+ pins = "gpio48";
-+ function = "pcie2_rst";
-+ drive-strength = <2>;
-+ bias-disable;
-+ };
-+ };
-+
-+ pcie2_pins: pcie2_pinmux {
-+ mux {
-+ pins = "gpio63";
-+ function = "pcie3_rst";
-+ drive-strength = <2>;
-+ bias-disable;
-+ output-low;
-+ };
-+ };
- };
-
- intc: interrupt-controller@2000000 {
-@@ -415,6 +446,144 @@
- dr_mode = "host";
- };
- };
-+
-+ pcie0: pci@1b500000 {
-+ compatible = "qcom,pcie-v0";
-+ reg = <0x1b500000 0x1000
-+ 0x1b502000 0x80
-+ 0x1b600000 0x100
-+ 0x0ff00000 0x100000>;
-+ reg-names = "dbi", "elbi", "parf", "config";
-+ device_type = "pci";
-+ linux,pci-domain = <0>;
-+ bus-range = <0x00 0xff>;
-+ num-lanes = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
-+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
-+
-+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi";
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-+
-+ clocks = <&gcc PCIE_A_CLK>,
-+ <&gcc PCIE_H_CLK>,
-+ <&gcc PCIE_PHY_CLK>;
-+ clock-names = "core", "iface", "phy";
-+
-+ resets = <&gcc PCIE_ACLK_RESET>,
-+ <&gcc PCIE_HCLK_RESET>,
-+ <&gcc PCIE_POR_RESET>,
-+ <&gcc PCIE_PCI_RESET>,
-+ <&gcc PCIE_PHY_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy";
-+
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+
-+ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-+
-+ status = "disabled";
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ compatible = "qcom,pcie-v0";
-+ reg = <0x1b700000 0x1000
-+ 0x1b702000 0x80
-+ 0x1b800000 0x100
-+ 0x31f00000 0x100000>;
-+ reg-names = "dbi", "elbi", "parf", "config";
-+ device_type = "pci";
-+ linux,pci-domain = <1>;
-+ bus-range = <0x00 0xff>;
-+ num-lanes = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
-+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
-+
-+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi";
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-+
-+ clocks = <&gcc PCIE_1_A_CLK>,
-+ <&gcc PCIE_1_H_CLK>,
-+ <&gcc PCIE_1_PHY_CLK>;
-+ clock-names = "core", "iface", "phy";
-+
-+ resets = <&gcc PCIE_1_ACLK_RESET>,
-+ <&gcc PCIE_1_HCLK_RESET>,
-+ <&gcc PCIE_1_POR_RESET>,
-+ <&gcc PCIE_1_PCI_RESET>,
-+ <&gcc PCIE_1_PHY_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy";
-+
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
-+
-+ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-+
-+ status = "disabled";
-+ };
-+
-+ pcie2: pci@1b900000 {
-+ compatible = "qcom,pcie-v0";
-+ reg = <0x1b900000 0x1000
-+ 0x1b902000 0x80
-+ 0x1ba00000 0x100
-+ 0x35f00000 0x100000>;
-+ reg-names = "dbi", "elbi", "parf", "config";
-+ device_type = "pci";
-+ linux,pci-domain = <2>;
-+ bus-range = <0x00 0xff>;
-+ num-lanes = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
-+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
-+
-+ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi";
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-+
-+ clocks = <&gcc PCIE_2_A_CLK>,
-+ <&gcc PCIE_2_H_CLK>,
-+ <&gcc PCIE_2_PHY_CLK>;
-+ clock-names = "core", "iface", "phy";
-+
-+ resets = <&gcc PCIE_2_ACLK_RESET>,
-+ <&gcc PCIE_2_HCLK_RESET>,
-+ <&gcc PCIE_2_POR_RESET>,
-+ <&gcc PCIE_2_PCI_RESET>,
-+ <&gcc PCIE_2_PHY_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy";
-+
-+ pinctrl-0 = <&pcie2_pins>;
-+ pinctrl-names = "default";
-+
-+ perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-+
-+ status = "disabled";
-+ };
- };
-
- sfpb_mutex: sfpb-mutex {
diff --git a/target/linux/ipq806x/patches-4.4/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-4.4/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
deleted file mode 100644
index e2d31354ed..0000000000
--- a/target/linux/ipq806x/patches-4.4/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From f004aa1dec6e2e206be025de15b115d60f2b21e3 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Tue, 21 Apr 2015 19:09:07 -0700
-Subject: [PATCH 9/9] ARM: qcom: automatically select PCI_DOMAINS if PCI is
- enabled
-
-If multiple PCIe devices are present in the system, the kernel will
-panic at boot time when trying to scan the PCI buses. This happens on
-IPQ806x based platforms, which has 3 PCIe ports.
-
-Enabling this option allows the kernel to assign the pci-domains
-according to the device-tree content. This allows multiple PCIe
-controllers to coexist in the system.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/mach-qcom/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -5,6 +5,7 @@ menuconfig ARCH_QCOM
- select ARM_AMBA
- select PINCTRL
- select QCOM_SCM if SMP
-+ select PCI_DOMAINS if PCI
- help
- Support for Qualcomm's devicetree based systems.
-
diff --git a/target/linux/ipq806x/patches-4.4/114-pcie-add-ctlr-init.patch b/target/linux/ipq806x/patches-4.4/114-pcie-add-ctlr-init.patch
deleted file mode 100644
index 6328113c06..0000000000
--- a/target/linux/ipq806x/patches-4.4/114-pcie-add-ctlr-init.patch
+++ /dev/null
@@ -1,311 +0,0 @@
---- a/drivers/pci/host/pcie-qcom.c
-+++ b/drivers/pci/host/pcie-qcom.c
-@@ -29,8 +29,53 @@
-
- #include "pcie-designware.h"
-
-+/* DBI registers */
-+#define PCIE20_CAP 0x70
-+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
-+
-+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
-+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
-+
-+#define PCIE20_PLR_IATU_VIEWPORT 0x900
-+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
-+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
-+
-+#define PCIE20_PLR_IATU_CTRL1 0x904
-+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
-+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
-+
-+#define PCIE20_PLR_IATU_CTRL2 0x908
-+#define PCIE20_PLR_IATU_ENABLE BIT(31)
-+
-+#define PCIE20_PLR_IATU_LBAR 0x90C
-+#define PCIE20_PLR_IATU_UBAR 0x910
-+#define PCIE20_PLR_IATU_LAR 0x914
-+#define PCIE20_PLR_IATU_LTAR 0x918
-+#define PCIE20_PLR_IATU_UTAR 0x91c
-+
-+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
-+
-+/* PARF registers */
-+#define PCIE20_PARF_PCS_DEEMPH 0x34
-+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
-+
-+#define PCIE20_PARF_PCS_SWING 0x38
-+#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
-+#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
-+
- #define PCIE20_PARF_PHY_CTRL 0x40
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
-+
- #define PCIE20_PARF_PHY_REFCLK 0x4C
-+#define REF_SSP_EN BIT(16)
-+#define REF_USE_PAD BIT(12)
-+
-+#define PCIE20_PARF_CONFIG_BITS 0x50
-+#define PHY_RX0_EQ(x) (x << 24)
-+
- #define PCIE20_PARF_DBI_BASE_ADDR 0x168
- #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
- #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
-@@ -39,9 +84,6 @@
- #define PCIE20_ELBI_SYS_STTS 0x08
- #define XMLH_LINK_UP BIT(10)
-
--#define PCIE20_CAP 0x70
--#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
--
- #define PERST_DELAY_MIN_US 1000
- #define PERST_DELAY_MAX_US 1005
-
-@@ -56,14 +98,18 @@ struct qcom_pcie_resources_v0 {
- struct clk *iface_clk;
- struct clk *core_clk;
- struct clk *phy_clk;
-+ struct clk *aux_clk;
-+ struct clk *ref_clk;
- struct reset_control *pci_reset;
- struct reset_control *axi_reset;
- struct reset_control *ahb_reset;
- struct reset_control *por_reset;
- struct reset_control *phy_reset;
-+ struct reset_control *ext_reset;
- struct regulator *vdda;
- struct regulator *vdda_phy;
- struct regulator *vdda_refclk;
-+ uint8_t phy_tx0_term_offset;
- };
-
- struct qcom_pcie_resources_v1 {
-@@ -106,20 +152,10 @@ writel_masked(void __iomem *addr, u32 cl
-
- static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert)
- {
-- int val, active_low;
--
- if (IS_ERR_OR_NULL(pcie->reset))
- return;
-
-- active_low = gpiod_is_active_low(pcie->reset);
--
-- if (assert)
-- val = !!active_low;
-- else
-- val = !active_low;
--
-- gpiod_set_value(pcie->reset, val);
--
-+ gpiod_set_value(pcie->reset, assert);
- usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US);
- }
-
-@@ -156,10 +192,13 @@ static void qcom_pcie_disable_resources_
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
-- reset_control_assert(res->pci_reset);
-+ reset_control_assert(res->phy_reset);
-+ reset_control_assert(res->ext_reset);
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->phy_clk);
-+ clk_disable_unprepare(res->aux_clk);
-+ clk_disable_unprepare(res->ref_clk);
- regulator_disable(res->vdda);
- regulator_disable(res->vdda_phy);
- regulator_disable(res->vdda_refclk);
-@@ -201,6 +240,12 @@ static int qcom_pcie_enable_resources_v0
- goto err_vdda_phy;
- }
-
-+ ret = reset_control_deassert(res->ext_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot assert ext reset\n");
-+ goto err_reset_ext;
-+ }
-+
- ret = clk_prepare_enable(res->iface_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable iface clock\n");
-@@ -219,21 +264,40 @@ static int qcom_pcie_enable_resources_v0
- goto err_clk_phy;
- }
-
-+ ret = clk_prepare_enable(res->aux_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable aux clock\n");
-+ goto err_clk_aux;
-+ }
-+
-+ ret = clk_prepare_enable(res->ref_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable ref clock\n");
-+ goto err_clk_ref;
-+ }
-+
- ret = reset_control_deassert(res->ahb_reset);
- if (ret) {
- dev_err(dev, "cannot deassert ahb reset\n");
- goto err_reset_ahb;
- }
-+ udelay(1);
-
- return 0;
-
- err_reset_ahb:
-+ clk_disable_unprepare(res->ref_clk);
-+err_clk_ref:
-+ clk_disable_unprepare(res->aux_clk);
-+err_clk_aux:
- clk_disable_unprepare(res->phy_clk);
- err_clk_phy:
- clk_disable_unprepare(res->core_clk);
- err_clk_core:
- clk_disable_unprepare(res->iface_clk);
- err_iface:
-+ reset_control_assert(res->ext_reset);
-+err_reset_ext:
- regulator_disable(res->vdda_phy);
- err_vdda_phy:
- regulator_disable(res->vdda_refclk);
-@@ -329,6 +393,14 @@ static int qcom_pcie_get_resources_v0(st
- if (IS_ERR(res->phy_clk))
- return PTR_ERR(res->phy_clk);
-
-+ res->aux_clk = devm_clk_get(dev, "aux");
-+ if (IS_ERR(res->aux_clk))
-+ return PTR_ERR(res->aux_clk);
-+
-+ res->ref_clk = devm_clk_get(dev, "ref");
-+ if (IS_ERR(res->ref_clk))
-+ return PTR_ERR(res->ref_clk);
-+
- res->pci_reset = devm_reset_control_get(dev, "pci");
- if (IS_ERR(res->pci_reset))
- return PTR_ERR(res->pci_reset);
-@@ -349,6 +421,14 @@ static int qcom_pcie_get_resources_v0(st
- if (IS_ERR(res->phy_reset))
- return PTR_ERR(res->phy_reset);
-
-+ res->ext_reset = devm_reset_control_get(dev, "ext");
-+ if (IS_ERR(res->ext_reset))
-+ return PTR_ERR(res->ext_reset);
-+
-+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
-+ &res->phy_tx0_term_offset))
-+ res->phy_tx0_term_offset = 0;
-+
- return 0;
- }
-
-@@ -461,6 +541,57 @@ err_res:
- qcom_pcie_disable_resources_v1(pcie);
- }
-
-+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
-+{
-+ struct pcie_port *pp = &pcie->pp;
-+
-+ /*
-+ * program and enable address translation region 0 (device config
-+ * address space); region type config;
-+ * axi config address range to device config address range
-+ */
-+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
-+ PCIE20_PLR_IATU_REGION_INDEX(0),
-+ pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
-+
-+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
-+ writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
-+ writel(pp->cfg0_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
-+ writel((pp->cfg0_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
-+ writel((pp->cfg0_base + pp->cfg0_size - 1),
-+ pcie->dbi + PCIE20_PLR_IATU_LAR);
-+ writel(busdev, pcie->dbi + PCIE20_PLR_IATU_LTAR);
-+ writel(0, pcie->dbi + PCIE20_PLR_IATU_UTAR);
-+}
-+
-+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
-+{
-+ struct pcie_port *pp = &pcie->pp;
-+
-+ /*
-+ * program and enable address translation region 2 (device resource
-+ * address space); region type memory;
-+ * axi device bar address range to device bar address range
-+ */
-+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
-+ PCIE20_PLR_IATU_REGION_INDEX(2),
-+ pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
-+
-+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
-+ writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
-+ writel(pp->mem_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
-+ writel((pp->mem_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
-+ writel(pp->mem_base + pp->mem_size - 1,
-+ pcie->dbi + PCIE20_PLR_IATU_LAR);
-+ writel(pp->mem_bus_addr, pcie->dbi + PCIE20_PLR_IATU_LTAR);
-+ writel(upper_32_bits(pp->mem_bus_addr),
-+ pcie->dbi + PCIE20_PLR_IATU_UTAR);
-+
-+ /* 256B PCIE buffer setting */
-+ writel(0x1, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
-+ writel(0x1, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
-+}
-+
- static void qcom_pcie_host_init_v0(struct pcie_port *pp)
- {
- struct qcom_pcie *pcie = to_qcom_pcie(pp);
-@@ -470,15 +601,34 @@ static void qcom_pcie_host_init_v0(struc
-
- qcom_ep_reset_assert(pcie);
-
-+ reset_control_assert(res->ahb_reset);
-+
- ret = qcom_pcie_enable_resources_v0(pcie);
- if (ret)
- return;
-
- writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
-
-- /* enable external reference clock */
-- writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
-+ /* Set Tx termination offset */
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
-+ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
-+ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
-+
-+ /* PARF programming */
-+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
-+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
-+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
-+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
-+ writel(PCS_SWING_TX_SWING_FULL(0x78) |
-+ PCS_SWING_TX_SWING_LOW(0x78),
-+ pcie->parf + PCIE20_PARF_PCS_SWING);
-+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
-+
-+ /* Enable reference clock */
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
-+ REF_USE_PAD, REF_SSP_EN);
-
-+ /* De-assert PHY, PCIe, POR and AXI resets */
- ret = reset_control_deassert(res->phy_reset);
- if (ret) {
- dev_err(dev, "cannot deassert phy reset\n");
-@@ -517,6 +667,9 @@ static void qcom_pcie_host_init_v0(struc
- if (ret)
- goto err;
-
-+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
-+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
-+
- return;
- err:
- qcom_ep_reset_assert(pcie);
diff --git a/target/linux/ipq806x/patches-4.4/115-add-pcie-aux-clk-dts.patch b/target/linux/ipq806x/patches-4.4/115-add-pcie-aux-clk-dts.patch
deleted file mode 100644
index 636a6c76a9..0000000000
--- a/target/linux/ipq806x/patches-4.4/115-add-pcie-aux-clk-dts.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -475,15 +475,21 @@
-
- clocks = <&gcc PCIE_A_CLK>,
- <&gcc PCIE_H_CLK>,
-- <&gcc PCIE_PHY_CLK>;
-- clock-names = "core", "iface", "phy";
-+ <&gcc PCIE_PHY_CLK>,
-+ <&gcc PCIE_AUX_CLK>,
-+ <&gcc PCIE_ALT_REF_CLK>;
-+ clock-names = "core", "iface", "phy", "aux", "ref";
-+
-+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
-+ assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_ACLK_RESET>,
- <&gcc PCIE_HCLK_RESET>,
- <&gcc PCIE_POR_RESET>,
- <&gcc PCIE_PCI_RESET>,
-- <&gcc PCIE_PHY_RESET>;
-- reset-names = "axi", "ahb", "por", "pci", "phy";
-+ <&gcc PCIE_PHY_RESET>,
-+ <&gcc PCIE_EXT_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-@@ -521,15 +527,21 @@
-
- clocks = <&gcc PCIE_1_A_CLK>,
- <&gcc PCIE_1_H_CLK>,
-- <&gcc PCIE_1_PHY_CLK>;
-- clock-names = "core", "iface", "phy";
-+ <&gcc PCIE_1_PHY_CLK>,
-+ <&gcc PCIE_1_AUX_CLK>,
-+ <&gcc PCIE_1_ALT_REF_CLK>;
-+ clock-names = "core", "iface", "phy", "aux", "ref";
-+
-+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
-+ assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_1_ACLK_RESET>,
- <&gcc PCIE_1_HCLK_RESET>,
- <&gcc PCIE_1_POR_RESET>,
- <&gcc PCIE_1_PCI_RESET>,
-- <&gcc PCIE_1_PHY_RESET>;
-- reset-names = "axi", "ahb", "por", "pci", "phy";
-+ <&gcc PCIE_1_PHY_RESET>,
-+ <&gcc PCIE_1_EXT_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
-@@ -567,15 +579,21 @@
-
- clocks = <&gcc PCIE_2_A_CLK>,
- <&gcc PCIE_2_H_CLK>,
-- <&gcc PCIE_2_PHY_CLK>;
-- clock-names = "core", "iface", "phy";
-+ <&gcc PCIE_2_PHY_CLK>,
-+ <&gcc PCIE_2_AUX_CLK>,
-+ <&gcc PCIE_2_ALT_REF_CLK>;
-+ clock-names = "core", "iface", "phy", "aux", "ref";
-+
-+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
-+ assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_2_ACLK_RESET>,
- <&gcc PCIE_2_HCLK_RESET>,
- <&gcc PCIE_2_POR_RESET>,
- <&gcc PCIE_2_PCI_RESET>,
-- <&gcc PCIE_2_PHY_RESET>;
-- reset-names = "axi", "ahb", "por", "pci", "phy";
-+ <&gcc PCIE_2_PHY_RESET>,
-+ <&gcc PCIE_2_EXT_RESET>;
-+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie2_pins>;
- pinctrl-names = "default";
diff --git a/target/linux/ipq806x/patches-4.4/126-add-rpm-to-ipq8064-dts.patch b/target/linux/ipq806x/patches-4.4/126-add-rpm-to-ipq8064-dts.patch
deleted file mode 100644
index 6e589d26ae..0000000000
--- a/target/linux/ipq806x/patches-4.4/126-add-rpm-to-ipq8064-dts.patch
+++ /dev/null
@@ -1,87 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -2,6 +2,7 @@
-
- #include "skeleton.dtsi"
- #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
-+#include <dt-bindings/mfd/qcom-rpm.h>
- #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
- #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-@@ -93,6 +94,63 @@
- reg-names = "lpass-lpaif";
- };
-
-+ rpm@108000 {
-+ compatible = "qcom,rpm-ipq8064";
-+ reg = <0x108000 0x1000>;
-+ qcom,ipc = <&l2cc 0x8 2>;
-+
-+ interrupts = <0 19 0>,
-+ <0 21 0>,
-+ <0 22 0>;
-+ interrupt-names = "ack",
-+ "err",
-+ "wakeup";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ smb208_s1a: smb208-s1a {
-+ compatible = "qcom,rpm-smb208";
-+ reg = <QCOM_RPM_SMB208_S1a>;
-+
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+
-+ };
-+
-+ smb208_s1b: smb208-s1b {
-+ compatible = "qcom,rpm-smb208";
-+ reg = <QCOM_RPM_SMB208_S1b>;
-+
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+
-+ smb208_s2a: smb208-s2a {
-+ compatible = "qcom,rpm-smb208";
-+ reg = <QCOM_RPM_SMB208_S2a>;
-+
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1250000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+
-+ smb208_s2b: smb208-s2b {
-+ compatible = "qcom,rpm-smb208";
-+ reg = <QCOM_RPM_SMB208_S2b>;
-+
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1250000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+ };
-+
- qcom_pinmux: pinmux@800000 {
- compatible = "qcom,ipq8064-pinctrl";
- reg = <0x800000 0x4000>;
-@@ -165,6 +223,12 @@
- reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
- };
-
-+ l2cc: clock-controller@2011000 {
-+ compatible = "qcom,kpss-gcc", "syscon";
-+ reg = <0x2011000 0x1000>;
-+ clock-output-names = "acpu_l2_aux";
-+ };
-+
- saw0: regulator@2089000 {
- compatible = "qcom,saw2";
- reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
diff --git a/target/linux/ipq806x/patches-4.4/133-ARM-Add-Krait-L2-register-accessor-functions.patch b/target/linux/ipq806x/patches-4.4/133-ARM-Add-Krait-L2-register-accessor-functions.patch
deleted file mode 100644
index 36a92c858a..0000000000
--- a/target/linux/ipq806x/patches-4.4/133-ARM-Add-Krait-L2-register-accessor-functions.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,01/13] ARM: Add Krait L2 register accessor functions
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063051
-Message-Id: <1426920332-9340-2-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- Viresh Kumar <viresh.kumar@linaro.org>,
- Mark Rutland <mark.rutland@arm.com>, Russell King <linux@arm.linux.org.uk>,
- Courtney Cavin <courtney.cavin@sonymobile.com>
-Date: Fri, 20 Mar 2015 23:45:20 -0700
-
-Krait CPUs have a handful of L2 cache controller registers that
-live behind a cp15 based indirection register. First you program
-the indirection register (l2cpselr) to point the L2 'window'
-register (l2cpdr) at what you want to read/write. Then you
-read/write the 'window' register to do what you want. The
-l2cpselr register is not banked per-cpu so we must lock around
-accesses to it to prevent other CPUs from re-pointing l2cpdr
-underneath us.
-
-Cc: Mark Rutland <mark.rutland@arm.com>
-Cc: Russell King <linux@arm.linux.org.uk>
-Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-arch/arm/common/Kconfig | 3 ++
- arch/arm/common/Makefile | 1 +
- arch/arm/common/krait-l2-accessors.c | 58 +++++++++++++++++++++++++++++++
- arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++
- 4 files changed, 82 insertions(+)
- create mode 100644 arch/arm/common/krait-l2-accessors.c
- create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
-
---- a/arch/arm/common/Kconfig
-+++ b/arch/arm/common/Kconfig
-@@ -9,6 +9,9 @@ config DMABOUNCE
- bool
- select ZONE_DMA
-
-+config KRAIT_L2_ACCESSORS
-+ bool
-+
- config SHARP_LOCOMO
- bool
-
---- a/arch/arm/common/Makefile
-+++ b/arch/arm/common/Makefile
-@@ -7,6 +7,7 @@ obj-y += firmware.o
- obj-$(CONFIG_ICST) += icst.o
- obj-$(CONFIG_SA1111) += sa1111.o
- obj-$(CONFIG_DMABOUNCE) += dmabounce.o
-+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
- obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
- obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
- obj-$(CONFIG_SHARP_SCOOP) += scoop.o
---- /dev/null
-+++ b/arch/arm/common/krait-l2-accessors.c
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/spinlock.h>
-+#include <linux/export.h>
-+
-+#include <asm/barrier.h>
-+#include <asm/krait-l2-accessors.h>
-+
-+static DEFINE_RAW_SPINLOCK(krait_l2_lock);
-+
-+void krait_set_l2_indirect_reg(u32 addr, u32 val)
-+{
-+ unsigned long flags;
-+
-+ raw_spin_lock_irqsave(&krait_l2_lock, flags);
-+ /*
-+ * Select the L2 window by poking l2cpselr, then write to the window
-+ * via l2cpdr.
-+ */
-+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
-+ isb();
-+ asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
-+ isb();
-+
-+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
-+}
-+EXPORT_SYMBOL(krait_set_l2_indirect_reg);
-+
-+u32 krait_get_l2_indirect_reg(u32 addr)
-+{
-+ u32 val;
-+ unsigned long flags;
-+
-+ raw_spin_lock_irqsave(&krait_l2_lock, flags);
-+ /*
-+ * Select the L2 window by poking l2cpselr, then read from the window
-+ * via l2cpdr.
-+ */
-+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
-+ isb();
-+ asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
-+
-+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
-+
-+ return val;
-+}
-+EXPORT_SYMBOL(krait_get_l2_indirect_reg);
---- /dev/null
-+++ b/arch/arm/include/asm/krait-l2-accessors.h
-@@ -0,0 +1,20 @@
-+/*
-+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
-+#define __ASMARM_KRAIT_L2_ACCESSORS_H
-+
-+extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
-+extern u32 krait_get_l2_indirect_reg(u32 addr);
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-4.4/134-clk-mux-Split-out-register-accessors-for-reuse.patch b/target/linux/ipq806x/patches-4.4/134-clk-mux-Split-out-register-accessors-for-reuse.patch
deleted file mode 100644
index 6efa5d8045..0000000000
--- a/target/linux/ipq806x/patches-4.4/134-clk-mux-Split-out-register-accessors-for-reuse.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From 4c28a15ea536281c8d619e5c6716ade914c79a6e Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Fri, 20 Mar 2015 23:45:21 -0700
-Subject: [PATCH 1/2] clk: mux: Split out register accessors for reuse
-
-We want to reuse the logic in clk-mux.c for other clock drivers
-that don't use readl as register accessors. Fortunately, there
-really isn't much to the mux code besides the table indirection
-and quirk flags if you assume any bit shifting and masking has
-been done already. Pull that logic out into reusable functions
-that operate on an optional table and some flags so that other
-drivers can use the same logic.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
----
- drivers/clk/clk-mux.c | 74 +++++++++++++++++++++++++++-----------------
- include/linux/clk-provider.h | 9 ++++--
- 2 files changed, 53 insertions(+), 30 deletions(-)
-
---- a/drivers/clk/clk-mux.c
-+++ b/drivers/clk/clk-mux.c
-@@ -28,35 +28,24 @@
-
- #define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
-
--static u8 clk_mux_get_parent(struct clk_hw *hw)
-+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
-+ unsigned int *table, unsigned long flags)
- {
-- struct clk_mux *mux = to_clk_mux(hw);
- int num_parents = clk_hw_get_num_parents(hw);
-- u32 val;
-
-- /*
-- * FIXME need a mux-specific flag to determine if val is bitwise or numeric
-- * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
-- * to 0x7 (index starts at one)
-- * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
-- * val = 0x4 really means "bit 2, index starts at bit 0"
-- */
-- val = clk_readl(mux->reg) >> mux->shift;
-- val &= mux->mask;
--
-- if (mux->table) {
-+ if (table) {
- int i;
-
- for (i = 0; i < num_parents; i++)
-- if (mux->table[i] == val)
-+ if (table[i] == val)
- return i;
- return -EINVAL;
- }
-
-- if (val && (mux->flags & CLK_MUX_INDEX_BIT))
-+ if (val && (flags & CLK_MUX_INDEX_BIT))
- val = ffs(val) - 1;
-
-- if (val && (mux->flags & CLK_MUX_INDEX_ONE))
-+ if (val && (flags & CLK_MUX_INDEX_ONE))
- val--;
-
- if (val >= num_parents)
-@@ -64,24 +53,53 @@ static u8 clk_mux_get_parent(struct clk_
-
- return val;
- }
-+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
-
--static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
-+static u8 _clk_mux_get_parent(struct clk_hw *hw)
- {
- struct clk_mux *mux = to_clk_mux(hw);
- u32 val;
-- unsigned long flags = 0;
-
-- if (mux->table)
-- index = mux->table[index];
-+ /*
-+ * FIXME need a mux-specific flag to determine if val is bitwise or numeric
-+ * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
-+ * to 0x7 (index starts at one)
-+ * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
-+ * val = 0x4 really means "bit 2, index starts at bit 0"
-+ */
-+ val = clk_readl(mux->reg) >> mux->shift;
-+ val &= mux->mask;
-
-- else {
-- if (mux->flags & CLK_MUX_INDEX_BIT)
-- index = 1 << index;
-+ return clk_mux_get_parent(hw, val, mux->table, mux->flags);
-+}
-+
-+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
-+ unsigned long flags)
-+{
-+ unsigned int val = index;
-
-- if (mux->flags & CLK_MUX_INDEX_ONE)
-- index++;
-+ if (table) {
-+ val = table[val];
-+ } else {
-+ if (flags & CLK_MUX_INDEX_BIT)
-+ val = 1 << index;
-+
-+ if (flags & CLK_MUX_INDEX_ONE)
-+ val++;
- }
-
-+ return val;
-+}
-+EXPORT_SYMBOL_GPL(clk_mux_reindex);
-+
-+static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct clk_mux *mux = to_clk_mux(hw);
-+ u32 val;
-+ unsigned long flags = 0;
-+
-+ index = clk_mux_reindex(index, mux->table, mux->flags);
-+
- if (mux->lock)
- spin_lock_irqsave(mux->lock, flags);
- else
-@@ -105,7 +123,7 @@ static int clk_mux_set_parent(struct clk
- }
-
- const struct clk_ops clk_mux_ops = {
-- .get_parent = clk_mux_get_parent,
-+ .get_parent = _clk_mux_get_parent,
- .set_parent = clk_mux_set_parent,
- .determine_rate = __clk_mux_determine_rate,
- };
-@@ -120,7 +138,7 @@ struct clk *clk_register_mux_table(struc
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
- void __iomem *reg, u8 shift, u32 mask,
-- u8 clk_mux_flags, u32 *table, spinlock_t *lock)
-+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
- {
- struct clk_mux *mux;
- struct clk *clk;
---- a/include/linux/clk-provider.h
-+++ b/include/linux/clk-provider.h
-@@ -433,7 +433,7 @@ void clk_unregister_divider(struct clk *
- struct clk_mux {
- struct clk_hw hw;
- void __iomem *reg;
-- u32 *table;
-+ unsigned int *table;
- u32 mask;
- u8 shift;
- u8 flags;
-@@ -449,6 +449,11 @@ struct clk_mux {
- extern const struct clk_ops clk_mux_ops;
- extern const struct clk_ops clk_mux_ro_ops;
-
-+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
-+ unsigned int *table, unsigned long flags);
-+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
-+ unsigned long flags);
-+
- struct clk *clk_register_mux(struct device *dev, const char *name,
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
-@@ -459,7 +464,7 @@ struct clk *clk_register_mux_table(struc
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
- void __iomem *reg, u8 shift, u32 mask,
-- u8 clk_mux_flags, u32 *table, spinlock_t *lock);
-+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
-
- void clk_unregister_mux(struct clk *clk);
-
diff --git a/target/linux/ipq806x/patches-4.4/135-clk-Avoid-sending-high-rates-to-downstream-clocks-du.patch b/target/linux/ipq806x/patches-4.4/135-clk-Avoid-sending-high-rates-to-downstream-clocks-du.patch
deleted file mode 100644
index 5015d32d86..0000000000
--- a/target/linux/ipq806x/patches-4.4/135-clk-Avoid-sending-high-rates-to-downstream-clocks-du.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 39d42ce5031d2a4f92fa203b87acfbab340b15a2 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Fri, 20 Mar 2015 23:45:22 -0700
-Subject: [PATCH 2/2] clk: Avoid sending high rates to downstream clocks during
- set_rate
-
-If a clock is on and we call clk_set_rate() on it we may get into
-a situation where the clock temporarily increases in rate
-dramatically while we walk the tree and call .set_rate() ops. For
-example, consider a case where a PLL feeds into a divider.
-Initially the divider is set to divide by 1 and the PLL is
-running fairly slow (100MHz). The downstream consumer of the
-divider output can only handle rates =< 400 MHz, but the divider
-can only choose between divisors of 1 and 4.
-
- +-----+ +----------------+
- | PLL |-->| div 1 or div 4 |---> consumer device
- +-----+ +----------------+
-
-To achieve a rate of 400MHz on the output of the divider, we
-would have to set the rate of the PLL to 1.6 GHz and then divide
-it by 4. The current code would set the PLL to 1.6GHz first while
-the divider is still set to 1, thus causing the downstream
-consumer of the clock to receive a few clock cycles of 1.6GHz
-clock (far beyond it's maximum acceptable rate). We should be
-changing the divider first before increasing the PLL rate to
-avoid this problem.
-
-Therefore, set the rate of any child clocks that are increasing
-in rate from their current rate so that they can increase their
-dividers if necessary. We assume that there isn't such a thing as
-minimum rate requirements.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
----
- drivers/clk/clk.c | 34 ++++++++++++++++++++++------------
- 1 file changed, 22 insertions(+), 12 deletions(-)
-
---- a/drivers/clk/clk.c
-+++ b/drivers/clk/clk.c
-@@ -1427,21 +1427,24 @@ static struct clk_core *clk_propagate_ra
- * walk down a subtree and set the new rates notifying the rate
- * change on the way
- */
--static void clk_change_rate(struct clk_core *core)
-+static void
-+clk_change_rate(struct clk_core *core, unsigned long best_parent_rate)
- {
- struct clk_core *child;
- struct hlist_node *tmp;
- unsigned long old_rate;
-- unsigned long best_parent_rate = 0;
- bool skip_set_rate = false;
- struct clk_core *old_parent;
-
-- old_rate = core->rate;
-+ hlist_for_each_entry(child, &core->children, child_node) {
-+ /* Skip children who will be reparented to another clock */
-+ if (child->new_parent && child->new_parent != core)
-+ continue;
-+ if (child->new_rate > child->rate)
-+ clk_change_rate(child, core->new_rate);
-+ }
-
-- if (core->new_parent)
-- best_parent_rate = core->new_parent->rate;
-- else if (core->parent)
-- best_parent_rate = core->parent->rate;
-+ old_rate = core->rate;
-
- if (core->new_parent && core->new_parent != core->parent) {
- old_parent = __clk_set_parent_before(core, core->new_parent);
-@@ -1467,7 +1470,7 @@ static void clk_change_rate(struct clk_c
-
- trace_clk_set_rate_complete(core, core->new_rate);
-
-- core->rate = clk_recalc(core, best_parent_rate);
-+ core->rate = core->new_rate;
-
- if (core->notifier_count && old_rate != core->rate)
- __clk_notify(core, POST_RATE_CHANGE, old_rate, core->rate);
-@@ -1483,12 +1486,13 @@ static void clk_change_rate(struct clk_c
- /* Skip children who will be reparented to another clock */
- if (child->new_parent && child->new_parent != core)
- continue;
-- clk_change_rate(child);
-+ if (child->new_rate != child->rate)
-+ clk_change_rate(child, core->new_rate);
- }
-
- /* handle the new child who might not be in core->children yet */
-- if (core->new_child)
-- clk_change_rate(core->new_child);
-+ if (core->new_child && core->new_child->new_rate != core->new_child->rate)
-+ clk_change_rate(core->new_child, core->new_rate);
- }
-
- static int clk_core_set_rate_nolock(struct clk_core *core,
-@@ -1497,6 +1501,7 @@ static int clk_core_set_rate_nolock(stru
- struct clk_core *top, *fail_clk;
- unsigned long rate = req_rate;
- int ret = 0;
-+ unsigned long parent_rate;
-
- if (!core)
- return 0;
-@@ -1522,8 +1527,13 @@ static int clk_core_set_rate_nolock(stru
- return -EBUSY;
- }
-
-+ if (top->parent)
-+ parent_rate = top->parent->rate;
-+ else
-+ parent_rate = 0;
-+
- /* change the rates */
-- clk_change_rate(top);
-+ clk_change_rate(top, parent_rate);
-
- core->req_rate = req_rate;
-
diff --git a/target/linux/ipq806x/patches-4.4/136-clk-Add-safe-switch-hook.patch b/target/linux/ipq806x/patches-4.4/136-clk-Add-safe-switch-hook.patch
deleted file mode 100644
index de3ac7d14c..0000000000
--- a/target/linux/ipq806x/patches-4.4/136-clk-Add-safe-switch-hook.patch
+++ /dev/null
@@ -1,151 +0,0 @@
-From f7a00ea959be31f9b742042294a359d508edce94 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Fri, 20 Mar 2015 23:45:23 -0700
-Subject: [PATCH] clk: Add safe switch hook
-
-Sometimes clocks can't accept their parent source turning off
-while the source is reprogrammed to a different rate. Most
-notably CPU clocks require a way to switch away from the current
-PLL they're running on, reprogram that PLL to a new rate, and
-then switch back to the PLL with the new rate once they're done.
-Add a hook that drivers can implement allowing them to return a
-'safe parent' that they can switch their parent to while the
-upstream source is reprogrammed to support this.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
----
- drivers/clk/clk.c | 61 ++++++++++++++++++++++++++++++++++++++------
- include/linux/clk-provider.h | 1 +
- 2 files changed, 54 insertions(+), 8 deletions(-)
-
---- a/drivers/clk/clk.c
-+++ b/drivers/clk/clk.c
-@@ -51,9 +51,12 @@ struct clk_core {
- struct clk_core **parents;
- u8 num_parents;
- u8 new_parent_index;
-+ u8 safe_parent_index;
- unsigned long rate;
- unsigned long req_rate;
-+ unsigned long old_rate;
- unsigned long new_rate;
-+ struct clk_core *safe_parent;
- struct clk_core *new_parent;
- struct clk_core *new_child;
- unsigned long flags;
-@@ -1271,7 +1274,8 @@ out:
- static void clk_calc_subtree(struct clk_core *core, unsigned long new_rate,
- struct clk_core *new_parent, u8 p_index)
- {
-- struct clk_core *child;
-+ struct clk_core *child, *parent;
-+ struct clk_hw *parent_hw;
-
- core->new_rate = new_rate;
- core->new_parent = new_parent;
-@@ -1281,6 +1285,18 @@ static void clk_calc_subtree(struct clk_
- if (new_parent && new_parent != core->parent)
- new_parent->new_child = core;
-
-+ if (core->ops->get_safe_parent) {
-+ parent_hw = core->ops->get_safe_parent(core->hw);
-+ if (parent_hw) {
-+ parent = parent_hw->core;
-+ p_index = clk_fetch_parent_index(core, parent);
-+ core->safe_parent_index = p_index;
-+ core->safe_parent = parent;
-+ }
-+ } else {
-+ core->safe_parent = NULL;
-+ }
-+
- hlist_for_each_entry(child, &core->children, child_node) {
- child->new_rate = clk_recalc(child, new_rate);
- clk_calc_subtree(child, child->new_rate, NULL, 0);
-@@ -1393,14 +1409,43 @@ static struct clk_core *clk_propagate_ra
- unsigned long event)
- {
- struct clk_core *child, *tmp_clk, *fail_clk = NULL;
-+ struct clk_core *old_parent;
- int ret = NOTIFY_DONE;
-
-- if (core->rate == core->new_rate)
-+ if (core->rate == core->new_rate && event != POST_RATE_CHANGE)
- return NULL;
-
-+ switch (event) {
-+ case PRE_RATE_CHANGE:
-+ if (core->safe_parent)
-+ core->ops->set_parent(core->hw, core->safe_parent_index);
-+ core->old_rate = core->rate;
-+ break;
-+ case POST_RATE_CHANGE:
-+ if (core->safe_parent) {
-+ old_parent = __clk_set_parent_before(core,
-+ core->new_parent);
-+ if (core->ops->set_rate_and_parent) {
-+ core->ops->set_rate_and_parent(core->hw,
-+ core->new_rate,
-+ core->new_parent ?
-+ core->new_parent->rate : 0,
-+ core->new_parent_index);
-+ } else if (core->ops->set_parent) {
-+ core->ops->set_parent(core->hw,
-+ core->new_parent_index);
-+ }
-+ __clk_set_parent_after(core, core->new_parent,
-+ old_parent);
-+ }
-+ break;
-+ }
-+
- if (core->notifier_count) {
-- ret = __clk_notify(core, event, core->rate, core->new_rate);
-- if (ret & NOTIFY_STOP_MASK)
-+ if (event != POST_RATE_CHANGE || core->old_rate != core->rate)
-+ ret = __clk_notify(core, event, core->old_rate,
-+ core->new_rate);
-+ if (ret & NOTIFY_STOP_MASK && event != POST_RATE_CHANGE)
- fail_clk = core;
- }
-
-@@ -1446,7 +1491,8 @@ clk_change_rate(struct clk_core *core, u
-
- old_rate = core->rate;
-
-- if (core->new_parent && core->new_parent != core->parent) {
-+ if (core->new_parent && core->new_parent != core->parent &&
-+ !core->safe_parent) {
- old_parent = __clk_set_parent_before(core, core->new_parent);
- trace_clk_set_parent(core, core->new_parent);
-
-@@ -1472,9 +1518,6 @@ clk_change_rate(struct clk_core *core, u
-
- core->rate = core->new_rate;
-
-- if (core->notifier_count && old_rate != core->rate)
-- __clk_notify(core, POST_RATE_CHANGE, old_rate, core->rate);
--
- if (core->flags & CLK_RECALC_NEW_RATES)
- (void)clk_calc_new_rates(core, core->new_rate);
-
-@@ -1537,6 +1580,8 @@ static int clk_core_set_rate_nolock(stru
-
- core->req_rate = req_rate;
-
-+ clk_propagate_rate_change(top, POST_RATE_CHANGE);
-+
- return ret;
- }
-
---- a/include/linux/clk-provider.h
-+++ b/include/linux/clk-provider.h
-@@ -202,6 +202,7 @@ struct clk_ops {
- struct clk_rate_request *req);
- int (*set_parent)(struct clk_hw *hw, u8 index);
- u8 (*get_parent)(struct clk_hw *hw);
-+ struct clk_hw *(*get_safe_parent)(struct clk_hw *hw);
- int (*set_rate)(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
- int (*set_rate_and_parent)(struct clk_hw *hw,
diff --git a/target/linux/ipq806x/patches-4.4/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch b/target/linux/ipq806x/patches-4.4/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
deleted file mode 100644
index 7e964490e0..0000000000
--- a/target/linux/ipq806x/patches-4.4/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,05/13] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063261
-Message-Id: <1426920332-9340-6-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- Viresh Kumar <viresh.kumar@linaro.org>
-Date: Fri, 20 Mar 2015 23:45:24 -0700
-
-HFPLLs are the main frequency source for Krait CPU clocks. Add
-support for changing the rate of these PLLs.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-I'd really like to get rid of __clk_hfpll_init_once() if possible...
-
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++
- drivers/clk/qcom/clk-hfpll.h | 54 +++++++++
- 3 files changed, 308 insertions(+)
- create mode 100644 drivers/clk/qcom/clk-hfpll.c
- create mode 100644 drivers/clk/qcom/clk-hfpll.h
-
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -8,6 +8,7 @@ clk-qcom-y += clk-rcg2.o
- clk-qcom-y += clk-branch.o
- clk-qcom-y += clk-regmap-divider.o
- clk-qcom-y += clk-regmap-mux.o
-+clk-qcom-y += clk-hfpll.o
- clk-qcom-y += reset.o
- clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
-
---- /dev/null
-+++ b/drivers/clk/qcom/clk-hfpll.c
-@@ -0,0 +1,253 @@
-+/*
-+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/export.h>
-+#include <linux/regmap.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/clk-provider.h>
-+#include <linux/spinlock.h>
-+
-+#include "clk-regmap.h"
-+#include "clk-hfpll.h"
-+
-+#define PLL_OUTCTRL BIT(0)
-+#define PLL_BYPASSNL BIT(1)
-+#define PLL_RESET_N BIT(2)
-+
-+/* Initialize a HFPLL at a given rate and enable it. */
-+static void __clk_hfpll_init_once(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+
-+ if (likely(h->init_done))
-+ return;
-+
-+ /* Configure PLL parameters for integer mode. */
-+ if (hd->config_val)
-+ regmap_write(regmap, hd->config_reg, hd->config_val);
-+ regmap_write(regmap, hd->m_reg, 0);
-+ regmap_write(regmap, hd->n_reg, 1);
-+
-+ if (hd->user_reg) {
-+ u32 regval = hd->user_val;
-+ unsigned long rate;
-+
-+ rate = clk_hw_get_rate(hw);
-+
-+ /* Pick the right VCO. */
-+ if (hd->user_vco_mask && rate > hd->low_vco_max_rate)
-+ regval |= hd->user_vco_mask;
-+ regmap_write(regmap, hd->user_reg, regval);
-+ }
-+
-+ if (hd->droop_reg)
-+ regmap_write(regmap, hd->droop_reg, hd->droop_val);
-+
-+ h->init_done = true;
-+}
-+
-+static void __clk_hfpll_enable(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 val;
-+
-+ __clk_hfpll_init_once(hw);
-+
-+ /* Disable PLL bypass mode. */
-+ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL);
-+
-+ /*
-+ * H/W requires a 5us delay between disabling the bypass and
-+ * de-asserting the reset. Delay 10us just to be safe.
-+ */
-+ udelay(10);
-+
-+ /* De-assert active-low PLL reset. */
-+ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
-+
-+ /* Wait for PLL to lock. */
-+ if (hd->status_reg) {
-+ do {
-+ regmap_read(regmap, hd->status_reg, &val);
-+ } while (!(val & BIT(hd->lock_bit)));
-+ } else {
-+ udelay(60);
-+ }
-+
-+ /* Enable PLL output. */
-+ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);
-+}
-+
-+/* Enable an already-configured HFPLL. */
-+static int clk_hfpll_enable(struct clk_hw *hw)
-+{
-+ unsigned long flags;
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 mode;
-+
-+ spin_lock_irqsave(&h->lock, flags);
-+ regmap_read(regmap, hd->mode_reg, &mode);
-+ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)))
-+ __clk_hfpll_enable(hw);
-+ spin_unlock_irqrestore(&h->lock, flags);
-+
-+ return 0;
-+}
-+
-+static void __clk_hfpll_disable(struct clk_hfpll *h)
-+{
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+
-+ /*
-+ * Disable the PLL output, disable test mode, enable the bypass mode,
-+ * and assert the reset.
-+ */
-+ regmap_update_bits(regmap, hd->mode_reg,
-+ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0);
-+}
-+
-+static void clk_hfpll_disable(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&h->lock, flags);
-+ __clk_hfpll_disable(h);
-+ spin_unlock_irqrestore(&h->lock, flags);
-+}
-+
-+static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ unsigned long rrate;
-+
-+ rate = clamp(rate, hd->min_rate, hd->max_rate);
-+
-+ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate;
-+ if (rrate > hd->max_rate)
-+ rrate -= *parent_rate;
-+
-+ return rrate;
-+}
-+
-+/*
-+ * For optimization reasons, assumes no downstream clocks are actively using
-+ * it.
-+ */
-+static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ unsigned long flags;
-+ u32 l_val, val;
-+ bool enabled;
-+
-+ l_val = rate / parent_rate;
-+
-+ spin_lock_irqsave(&h->lock, flags);
-+
-+ enabled = __clk_is_enabled(hw->clk);
-+ if (enabled)
-+ __clk_hfpll_disable(h);
-+
-+ /* Pick the right VCO. */
-+ if (hd->user_reg && hd->user_vco_mask) {
-+ regmap_read(regmap, hd->user_reg, &val);
-+ if (rate <= hd->low_vco_max_rate)
-+ val &= ~hd->user_vco_mask;
-+ else
-+ val |= hd->user_vco_mask;
-+ regmap_write(regmap, hd->user_reg, val);
-+ }
-+
-+ regmap_write(regmap, hd->l_reg, l_val);
-+
-+ if (enabled)
-+ __clk_hfpll_enable(hw);
-+
-+ spin_unlock_irqrestore(&h->lock, flags);
-+
-+ return 0;
-+}
-+
-+static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 l_val;
-+
-+ regmap_read(regmap, hd->l_reg, &l_val);
-+
-+ return l_val * parent_rate;
-+}
-+
-+static void clk_hfpll_init(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 mode, status;
-+
-+ regmap_read(regmap, hd->mode_reg, &mode);
-+ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) {
-+ __clk_hfpll_init_once(hw);
-+ return;
-+ }
-+
-+ if (hd->status_reg) {
-+ regmap_read(regmap, hd->status_reg, &status);
-+ if (!(status & BIT(hd->lock_bit))) {
-+ WARN(1, "HFPLL %s is ON, but not locked!\n",
-+ __clk_get_name(hw->clk));
-+ clk_hfpll_disable(hw);
-+ __clk_hfpll_init_once(hw);
-+ }
-+ }
-+}
-+
-+static int hfpll_is_enabled(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 mode;
-+
-+ regmap_read(regmap, hd->mode_reg, &mode);
-+ mode &= 0x7;
-+ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL);
-+}
-+
-+const struct clk_ops clk_ops_hfpll = {
-+ .enable = clk_hfpll_enable,
-+ .disable = clk_hfpll_disable,
-+ .is_enabled = hfpll_is_enabled,
-+ .round_rate = clk_hfpll_round_rate,
-+ .set_rate = clk_hfpll_set_rate,
-+ .recalc_rate = clk_hfpll_recalc_rate,
-+ .init = clk_hfpll_init,
-+};
-+EXPORT_SYMBOL_GPL(clk_ops_hfpll);
---- /dev/null
-+++ b/drivers/clk/qcom/clk-hfpll.h
-@@ -0,0 +1,54 @@
-+/*
-+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+#ifndef __QCOM_CLK_HFPLL_H__
-+#define __QCOM_CLK_HFPLL_H__
-+
-+#include <linux/clk-provider.h>
-+#include <linux/spinlock.h>
-+#include "clk-regmap.h"
-+
-+struct hfpll_data {
-+ u32 mode_reg;
-+ u32 l_reg;
-+ u32 m_reg;
-+ u32 n_reg;
-+ u32 user_reg;
-+ u32 droop_reg;
-+ u32 config_reg;
-+ u32 status_reg;
-+ u8 lock_bit;
-+
-+ u32 droop_val;
-+ u32 config_val;
-+ u32 user_val;
-+ u32 user_vco_mask;
-+ unsigned long low_vco_max_rate;
-+
-+ unsigned long min_rate;
-+ unsigned long max_rate;
-+};
-+
-+struct clk_hfpll {
-+ struct hfpll_data const *d;
-+ int init_done;
-+
-+ struct clk_regmap clkr;
-+ spinlock_t lock;
-+};
-+
-+#define to_clk_hfpll(_hw) \
-+ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr)
-+
-+extern const struct clk_ops clk_ops_hfpll;
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-4.4/138-clk-qcom-Add-HFPLL-driver.patch b/target/linux/ipq806x/patches-4.4/138-clk-qcom-Add-HFPLL-driver.patch
deleted file mode 100644
index 83623206ce..0000000000
--- a/target/linux/ipq806x/patches-4.4/138-clk-qcom-Add-HFPLL-driver.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,06/13] clk: qcom: Add HFPLL driver
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063231
-Message-Id: <1426920332-9340-7-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
-Date: Fri, 20 Mar 2015 23:45:25 -0700
-
-On some devices (MSM8974 for example), the HFPLLs are
-instantiated within the Krait processor subsystem as separate
-register regions. Add a driver for these PLLs so that we can
-provide HFPLL clocks for use by the system.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-.../devicetree/bindings/clock/qcom,hfpll.txt | 40 ++++++++
- drivers/clk/qcom/Kconfig | 8 ++
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/hfpll.c | 109 +++++++++++++++++++++
- 4 files changed, 158 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
- create mode 100644 drivers/clk/qcom/hfpll.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
-@@ -0,0 +1,40 @@
-+High-Frequency PLL (HFPLL)
-+
-+PROPERTIES
-+
-+- compatible:
-+ Usage: required
-+ Value type: <string>
-+ Definition: must be "qcom,hfpll"
-+
-+- reg:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: address and size of HPLL registers. An optional second
-+ element specifies the address and size of the alias
-+ register region.
-+
-+- clock-output-names:
-+ Usage: required
-+ Value type: <string>
-+ Definition: Name of the PLL. Typically hfpllX where X is a CPU number
-+ starting at 0. Otherwise hfpll_Y where Y is more specific
-+ such as "l2".
-+
-+Example:
-+
-+1) An HFPLL for the L2 cache.
-+
-+ clock-controller@f9016000 {
-+ compatible = "qcom,hfpll";
-+ reg = <0xf9016000 0x30>;
-+ clock-output-names = "hfpll_l2";
-+ };
-+
-+2) An HFPLL for CPU0. This HFPLL has the alias register region.
-+
-+ clock-controller@f908a000 {
-+ compatible = "qcom,hfpll";
-+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
-+ clock-output-names = "hfpll0";
-+ };
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -135,3 +135,11 @@ config MSM_MMCC_8974
- Support for the multimedia clock controller on msm8974 devices.
- Say Y if you want to support multimedia devices such as display,
- graphics, video encode/decode, camera, etc.
-+
-+config QCOM_HFPLL
-+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
-+ depends on COMMON_CLK_QCOM
-+ help
-+ Support for the high-frequency PLLs present on Qualcomm devices.
-+ Say Y if you want to support CPU frequency scaling on devices
-+ such as MSM8974, APQ8084, etc.
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -25,3 +25,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8
- obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
- obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
- obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
-+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
---- /dev/null
-+++ b/drivers/clk/qcom/hfpll.c
-@@ -0,0 +1,109 @@
-+/*
-+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/regmap.h>
-+
-+#include "clk-regmap.h"
-+#include "clk-hfpll.h"
-+
-+static const struct hfpll_data hdata = {
-+ .mode_reg = 0x00,
-+ .l_reg = 0x04,
-+ .m_reg = 0x08,
-+ .n_reg = 0x0c,
-+ .user_reg = 0x10,
-+ .config_reg = 0x14,
-+ .config_val = 0x430405d,
-+ .status_reg = 0x1c,
-+ .lock_bit = 16,
-+
-+ .user_val = 0x8,
-+ .user_vco_mask = 0x100000,
-+ .low_vco_max_rate = 1248000000,
-+ .min_rate = 537600000UL,
-+ .max_rate = 2900000000UL,
-+};
-+
-+static const struct of_device_id qcom_hfpll_match_table[] = {
-+ { .compatible = "qcom,hfpll" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
-+
-+static const struct regmap_config hfpll_regmap_config = {
-+ .reg_bits = 32,
-+ .reg_stride = 4,
-+ .val_bits = 32,
-+ .max_register = 0x30,
-+ .fast_io = true,
-+};
-+
-+static int qcom_hfpll_probe(struct platform_device *pdev)
-+{
-+ struct clk *clk;
-+ struct resource *res;
-+ struct device *dev = &pdev->dev;
-+ void __iomem *base;
-+ struct regmap *regmap;
-+ struct clk_hfpll *h;
-+ struct clk_init_data init = {
-+ .parent_names = (const char *[]){ "xo" },
-+ .num_parents = 1,
-+ .ops = &clk_ops_hfpll,
-+ };
-+
-+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
-+ if (!h)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
-+ if (IS_ERR(regmap))
-+ return PTR_ERR(regmap);
-+
-+ if (of_property_read_string_index(dev->of_node, "clock-output-names",
-+ 0, &init.name))
-+ return -ENODEV;
-+
-+ h->d = &hdata;
-+ h->clkr.hw.init = &init;
-+ spin_lock_init(&h->lock);
-+
-+ clk = devm_clk_register_regmap(&pdev->dev, &h->clkr);
-+
-+ return PTR_ERR_OR_ZERO(clk);
-+}
-+
-+static struct platform_driver qcom_hfpll_driver = {
-+ .probe = qcom_hfpll_probe,
-+ .driver = {
-+ .name = "qcom-hfpll",
-+ .of_match_table = qcom_hfpll_match_table,
-+ },
-+};
-+module_platform_driver(qcom_hfpll_driver);
-+
-+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qcom-hfpll");
diff --git a/target/linux/ipq806x/patches-4.4/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch b/target/linux/ipq806x/patches-4.4/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
deleted file mode 100644
index a01decfd8b..0000000000
--- a/target/linux/ipq806x/patches-4.4/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,08/13] clk: qcom: Add IPQ806X's HFPLLs
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063241
-Message-Id: <1426920332-9340-9-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- Viresh Kumar <viresh.kumar@linaro.org>
-Date: Fri, 20 Mar 2015 23:45:27 -0700
-
-Describe the HFPLLs present on IPQ806X devices.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-drivers/clk/qcom/gcc-ipq806x.c | 83 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 83 insertions(+)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -30,6 +30,7 @@
- #include "clk-pll.h"
- #include "clk-rcg.h"
- #include "clk-branch.h"
-+#include "clk-hfpll.h"
- #include "reset.h"
-
- static struct clk_pll pll0 = {
-@@ -113,6 +114,85 @@ static struct clk_regmap pll8_vote = {
- },
- };
-
-+static struct hfpll_data hfpll0_data = {
-+ .mode_reg = 0x3200,
-+ .l_reg = 0x3208,
-+ .m_reg = 0x320c,
-+ .n_reg = 0x3210,
-+ .config_reg = 0x3204,
-+ .status_reg = 0x321c,
-+ .config_val = 0x7845c665,
-+ .droop_reg = 0x3214,
-+ .droop_val = 0x0108c000,
-+ .min_rate = 600000000UL,
-+ .max_rate = 1800000000UL,
-+};
-+
-+static struct clk_hfpll hfpll0 = {
-+ .d = &hfpll0_data,
-+ .clkr.hw.init = &(struct clk_init_data){
-+ .parent_names = (const char *[]){ "pxo" },
-+ .num_parents = 1,
-+ .name = "hfpll0",
-+ .ops = &clk_ops_hfpll,
-+ .flags = CLK_IGNORE_UNUSED,
-+ },
-+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
-+};
-+
-+static struct hfpll_data hfpll1_data = {
-+ .mode_reg = 0x3240,
-+ .l_reg = 0x3248,
-+ .m_reg = 0x324c,
-+ .n_reg = 0x3250,
-+ .config_reg = 0x3244,
-+ .status_reg = 0x325c,
-+ .config_val = 0x7845c665,
-+ .droop_reg = 0x3314,
-+ .droop_val = 0x0108c000,
-+ .min_rate = 600000000UL,
-+ .max_rate = 1800000000UL,
-+};
-+
-+static struct clk_hfpll hfpll1 = {
-+ .d = &hfpll1_data,
-+ .clkr.hw.init = &(struct clk_init_data){
-+ .parent_names = (const char *[]){ "pxo" },
-+ .num_parents = 1,
-+ .name = "hfpll1",
-+ .ops = &clk_ops_hfpll,
-+ .flags = CLK_IGNORE_UNUSED,
-+ },
-+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
-+};
-+
-+static struct hfpll_data hfpll_l2_data = {
-+ .mode_reg = 0x3300,
-+ .l_reg = 0x3308,
-+ .m_reg = 0x330c,
-+ .n_reg = 0x3310,
-+ .config_reg = 0x3304,
-+ .status_reg = 0x331c,
-+ .config_val = 0x7845c665,
-+ .droop_reg = 0x3314,
-+ .droop_val = 0x0108c000,
-+ .min_rate = 600000000UL,
-+ .max_rate = 1800000000UL,
-+};
-+
-+static struct clk_hfpll hfpll_l2 = {
-+ .d = &hfpll_l2_data,
-+ .clkr.hw.init = &(struct clk_init_data){
-+ .parent_names = (const char *[]){ "pxo" },
-+ .num_parents = 1,
-+ .name = "hfpll_l2",
-+ .ops = &clk_ops_hfpll,
-+ .flags = CLK_IGNORE_UNUSED,
-+ },
-+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
-+};
-+
-+
- static struct clk_pll pll14 = {
- .l_reg = 0x31c4,
- .m_reg = 0x31c8,
-@@ -2837,6 +2917,9 @@ static struct clk_regmap *gcc_ipq806x_cl
- [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
- [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
- [NSSTCM_CLK] = &nss_tcm_clk.clkr,
-+ [PLL9] = &hfpll0.clkr,
-+ [PLL10] = &hfpll1.clkr,
-+ [PLL12] = &hfpll_l2.clkr,
- };
-
- static const struct qcom_reset_map gcc_ipq806x_resets[] = {
diff --git a/target/linux/ipq806x/patches-4.4/140-clk-qcom-Add-support-for-Krait-clocks.patch b/target/linux/ipq806x/patches-4.4/140-clk-qcom-Add-support-for-Krait-clocks.patch
deleted file mode 100644
index bbfcab9cc0..0000000000
--- a/target/linux/ipq806x/patches-4.4/140-clk-qcom-Add-support-for-Krait-clocks.patch
+++ /dev/null
@@ -1,272 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,09/13] clk: qcom: Add support for Krait clocks
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063251
-Message-Id: <1426920332-9340-10-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- Viresh Kumar <viresh.kumar@linaro.org>
-Date: Fri, 20 Mar 2015 23:45:28 -0700
-
-The Krait clocks are made up of a series of muxes and a divider
-that choose between a fixed rate clock and dedicated HFPLLs for
-each CPU. Instead of using mmio accesses to remux parents, the
-Krait implementation exposes the remux control via cp15
-registers. Support these clocks.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-drivers/clk/qcom/Kconfig | 4 ++
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-krait.c | 166 +++++++++++++++++++++++++++++++++++++++++++
- drivers/clk/qcom/clk-krait.h | 49 +++++++++++++
- 4 files changed, 220 insertions(+)
- create mode 100644 drivers/clk/qcom/clk-krait.c
- create mode 100644 drivers/clk/qcom/clk-krait.h
-
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -143,3 +143,7 @@ config QCOM_HFPLL
- Support for the high-frequency PLLs present on Qualcomm devices.
- Say Y if you want to support CPU frequency scaling on devices
- such as MSM8974, APQ8084, etc.
-+
-+config KRAIT_CLOCKS
-+ bool
-+ select KRAIT_L2_ACCESSORS
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -8,6 +8,7 @@ clk-qcom-y += clk-rcg2.o
- clk-qcom-y += clk-branch.o
- clk-qcom-y += clk-regmap-divider.o
- clk-qcom-y += clk-regmap-mux.o
-+clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
- clk-qcom-y += clk-hfpll.o
- clk-qcom-y += reset.o
- clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
---- /dev/null
-+++ b/drivers/clk/qcom/clk-krait.c
-@@ -0,0 +1,167 @@
-+/*
-+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/clk-provider.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/krait-l2-accessors.h>
-+
-+#include "clk-krait.h"
-+
-+/* Secondary and primary muxes share the same cp15 register */
-+static DEFINE_SPINLOCK(krait_clock_reg_lock);
-+
-+#define LPL_SHIFT 8
-+static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel)
-+{
-+ unsigned long flags;
-+ u32 regval;
-+
-+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
-+ regval = krait_get_l2_indirect_reg(mux->offset);
-+ regval &= ~(mux->mask << mux->shift);
-+ regval |= (sel & mux->mask) << mux->shift;
-+ if (mux->lpl) {
-+ regval &= ~(mux->mask << (mux->shift + LPL_SHIFT));
-+ regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT);
-+ }
-+ krait_set_l2_indirect_reg(mux->offset, regval);
-+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
-+
-+ /* Wait for switch to complete. */
-+ mb();
-+ udelay(1);
-+}
-+
-+static int krait_mux_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+ u32 sel;
-+
-+ sel = clk_mux_reindex(index, mux->parent_map, 0);
-+ mux->en_mask = sel;
-+ /* Don't touch mux if CPU is off as it won't work */
-+ if (__clk_is_enabled(hw->clk))
-+ __krait_mux_set_sel(mux, sel);
-+ return 0;
-+}
-+
-+static u8 krait_mux_get_parent(struct clk_hw *hw)
-+{
-+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+ u32 sel;
-+
-+ sel = krait_get_l2_indirect_reg(mux->offset);
-+ sel >>= mux->shift;
-+ sel &= mux->mask;
-+ mux->en_mask = sel;
-+
-+ return clk_mux_get_parent(hw, sel, mux->parent_map, 0);
-+}
-+
-+static struct clk_hw *krait_mux_get_safe_parent(struct clk_hw *hw,
-+ unsigned long *safe_freq)
-+{
-+ int i;
-+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+ int num_parents = clk_hw_get_num_parents(hw);
-+
-+ i = mux->safe_sel;
-+ for (i = 0; i < num_parents; i++)
-+ if (mux->safe_sel == mux->parent_map[i])
-+ break;
-+
-+ return clk_hw_get_parent_by_index(hw, i);
-+}
-+
-+static int krait_mux_enable(struct clk_hw *hw)
-+{
-+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+
-+ __krait_mux_set_sel(mux, mux->en_mask);
-+
-+ return 0;
-+}
-+
-+static void krait_mux_disable(struct clk_hw *hw)
-+{
-+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+
-+ __krait_mux_set_sel(mux, mux->safe_sel);
-+}
-+
-+const struct clk_ops krait_mux_clk_ops = {
-+ .enable = krait_mux_enable,
-+ .disable = krait_mux_disable,
-+ .set_parent = krait_mux_set_parent,
-+ .get_parent = krait_mux_get_parent,
-+ .determine_rate = __clk_mux_determine_rate_closest,
-+ .get_safe_parent = krait_mux_get_safe_parent,
-+};
-+EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
-+
-+/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */
-+static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2);
-+ return DIV_ROUND_UP(*parent_rate, 2);
-+}
-+
-+static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
-+ unsigned long flags;
-+ u32 val;
-+ u32 mask = BIT(d->width) - 1;
-+
-+ if (d->lpl)
-+ mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift;
-+
-+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
-+ val = krait_get_l2_indirect_reg(d->offset);
-+ val &= ~mask;
-+ krait_set_l2_indirect_reg(d->offset, val);
-+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
-+
-+ return 0;
-+}
-+
-+static unsigned long
-+krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
-+{
-+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
-+ u32 mask = BIT(d->width) - 1;
-+ u32 div;
-+
-+ div = krait_get_l2_indirect_reg(d->offset);
-+ div >>= d->shift;
-+ div &= mask;
-+ div = (div + 1) * 2;
-+
-+ return DIV_ROUND_UP(parent_rate, div);
-+}
-+
-+const struct clk_ops krait_div2_clk_ops = {
-+ .round_rate = krait_div2_round_rate,
-+ .set_rate = krait_div2_set_rate,
-+ .recalc_rate = krait_div2_recalc_rate,
-+};
-+EXPORT_SYMBOL_GPL(krait_div2_clk_ops);
---- /dev/null
-+++ b/drivers/clk/qcom/clk-krait.h
-@@ -0,0 +1,49 @@
-+/*
-+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __QCOM_CLK_KRAIT_H
-+#define __QCOM_CLK_KRAIT_H
-+
-+#include <linux/clk-provider.h>
-+
-+struct krait_mux_clk {
-+ unsigned int *parent_map;
-+ bool has_safe_parent;
-+ u8 safe_sel;
-+ u32 offset;
-+ u32 mask;
-+ u32 shift;
-+ u32 en_mask;
-+ bool lpl;
-+
-+ struct clk_hw hw;
-+};
-+
-+#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw)
-+
-+extern const struct clk_ops krait_mux_clk_ops;
-+
-+struct krait_div2_clk {
-+ u32 offset;
-+ u8 width;
-+ u32 shift;
-+ bool lpl;
-+
-+ struct clk_hw hw;
-+};
-+
-+#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw)
-+
-+extern const struct clk_ops krait_div2_clk_ops;
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-4.4/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch b/target/linux/ipq806x/patches-4.4/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
deleted file mode 100644
index 56374c5d0c..0000000000
--- a/target/linux/ipq806x/patches-4.4/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,10/13] clk: qcom: Add KPSS ACC/GCC driver
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063201
-Message-Id: <1426920332-9340-11-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
-Date: Fri, 20 Mar 2015 23:45:29 -0700
-
-The ACC and GCC regions present in KPSSv1 contain registers to
-control clocks and power to each Krait CPU and L2. For CPUfreq
-purposes probe these devices and expose a mux clock that chooses
-between PXO and PLL8.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-.../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 7 ++
- .../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 28 +++++++
- drivers/clk/qcom/Kconfig | 8 ++
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/kpss-xcc.c | 95 ++++++++++++++++++++++
- 5 files changed, 139 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
- create mode 100644 drivers/clk/qcom/kpss-xcc.c
-
---- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
-+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
-@@ -21,10 +21,17 @@ PROPERTIES
- the register region. An optional second element specifies
- the base address and size of the alias register region.
-
-+- clock-output-names:
-+ Usage: optional
-+ Value type: <string>
-+ Definition: Name of the output clock. Typically acpuX_aux where X is a
-+ CPU number starting at 0.
-+
- Example:
-
- clock-controller@2088000 {
- compatible = "qcom,kpss-acc-v2";
- reg = <0x02088000 0x1000>,
- <0x02008000 0x1000>;
-+ clock-output-names = "acpu0_aux";
- };
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
-@@ -0,0 +1,28 @@
-+Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
-+
-+PROPERTIES
-+
-+- compatible:
-+ Usage: required
-+ Value type: <string>
-+ Definition: should be one of:
-+ "qcom,kpss-gcc"
-+
-+- reg:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: base address and size of the register region
-+
-+- clock-output-names:
-+ Usage: required
-+ Value type: <string>
-+ Definition: Name of the output clock. Typically acpu_l2_aux indicating
-+ an L2 cache auxiliary clock.
-+
-+Example:
-+
-+ l2cc: clock-controller@2011000 {
-+ compatible = "qcom,kpss-gcc";
-+ reg = <0x2011000 0x1000>;
-+ clock-output-names = "acpu_l2_aux";
-+ };
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -144,6 +144,14 @@ config QCOM_HFPLL
- Say Y if you want to support CPU frequency scaling on devices
- such as MSM8974, APQ8084, etc.
-
-+config KPSS_XCC
-+ tristate "KPSS Clock Controller"
-+ depends on COMMON_CLK_QCOM
-+ help
-+ Support for the Krait ACC and GCC clock controllers. Say Y
-+ if you want to support CPU frequency scaling on devices such
-+ as MSM8960, APQ8064, etc.
-+
- config KRAIT_CLOCKS
- bool
- select KRAIT_L2_ACCESSORS
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -9,6 +9,7 @@ clk-qcom-y += clk-branch.o
- clk-qcom-y += clk-regmap-divider.o
- clk-qcom-y += clk-regmap-mux.o
- clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
-+obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
- clk-qcom-y += clk-hfpll.o
- clk-qcom-y += reset.o
- clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
---- /dev/null
-+++ b/drivers/clk/qcom/kpss-xcc.c
-@@ -0,0 +1,95 @@
-+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+
-+static const char *aux_parents[] = {
-+ "pll8_vote",
-+ "pxo",
-+};
-+
-+static unsigned int aux_parent_map[] = {
-+ 3,
-+ 0,
-+};
-+
-+static const struct of_device_id kpss_xcc_match_table[] = {
-+ { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL },
-+ { .compatible = "qcom,kpss-gcc" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, kpss_xcc_match_table);
-+
-+static int kpss_xcc_driver_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *id;
-+ struct clk *clk;
-+ struct resource *res;
-+ void __iomem *base;
-+ const char *name;
-+
-+ id = of_match_device(kpss_xcc_match_table, &pdev->dev);
-+ if (!id)
-+ return -ENODEV;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ if (id->data) {
-+ if (of_property_read_string_index(pdev->dev.of_node,
-+ "clock-output-names", 0, &name))
-+ return -ENODEV;
-+ base += 0x14;
-+ } else {
-+ name = "acpu_l2_aux";
-+ base += 0x28;
-+ }
-+
-+ clk = clk_register_mux_table(&pdev->dev, name, aux_parents,
-+ ARRAY_SIZE(aux_parents), 0, base, 0, 0x3,
-+ 0, aux_parent_map, NULL);
-+
-+ platform_set_drvdata(pdev, clk);
-+
-+ return PTR_ERR_OR_ZERO(clk);
-+}
-+
-+static int kpss_xcc_driver_remove(struct platform_device *pdev)
-+{
-+ clk_unregister_mux(platform_get_drvdata(pdev));
-+ return 0;
-+}
-+
-+static struct platform_driver kpss_xcc_driver = {
-+ .probe = kpss_xcc_driver_probe,
-+ .remove = kpss_xcc_driver_remove,
-+ .driver = {
-+ .name = "kpss-xcc",
-+ .of_match_table = kpss_xcc_match_table,
-+ },
-+};
-+module_platform_driver(kpss_xcc_driver);
-+
-+MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:kpss-xcc");
diff --git a/target/linux/ipq806x/patches-4.4/142-clk-qcom-Add-Krait-clock-controller-driver.patch b/target/linux/ipq806x/patches-4.4/142-clk-qcom-Add-Krait-clock-controller-driver.patch
deleted file mode 100644
index bd4e7bca3d..0000000000
--- a/target/linux/ipq806x/patches-4.4/142-clk-qcom-Add-Krait-clock-controller-driver.patch
+++ /dev/null
@@ -1,435 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,11/13] clk: qcom: Add Krait clock controller driver
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063121
-Message-Id: <1426920332-9340-12-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
-Date: Fri, 20 Mar 2015 23:45:30 -0700
-
-The Krait CPU clocks are made up of a primary mux and secondary
-mux for each CPU and the L2, controlled via cp15 accessors. For
-Kraits within KPSSv1 each secondary mux accepts a different aux
-source, but on KPSSv2 each secondary mux accepts the same aux
-source.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-.../devicetree/bindings/clock/qcom,krait-cc.txt | 22 ++
- drivers/clk/qcom/Kconfig | 8 +
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/krait-cc.c | 352 +++++++++++++++++++++
- 4 files changed, 383 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
- create mode 100644 drivers/clk/qcom/krait-cc.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
-@@ -0,0 +1,22 @@
-+Krait Clock Controller
-+
-+PROPERTIES
-+
-+- compatible:
-+ Usage: required
-+ Value type: <string>
-+ Definition: must be one of:
-+ "qcom,krait-cc-v1"
-+ "qcom,krait-cc-v2"
-+
-+- #clock-cells:
-+ Usage: required
-+ Value type: <u32>
-+ Definition: must be 1
-+
-+Example:
-+
-+ kraitcc: clock-controller {
-+ compatible = "qcom,krait-cc-v1";
-+ #clock-cells = <1>;
-+ };
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -152,6 +152,14 @@ config KPSS_XCC
- if you want to support CPU frequency scaling on devices such
- as MSM8960, APQ8064, etc.
-
-+config KRAITCC
-+ tristate "Krait Clock Controller"
-+ depends on COMMON_CLK_QCOM && ARM
-+ select KRAIT_CLOCKS
-+ help
-+ Support for the Krait CPU clocks on Qualcomm devices.
-+ Say Y if you want to support CPU frequency scaling.
-+
- config KRAIT_CLOCKS
- bool
- select KRAIT_L2_ACCESSORS
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -28,3 +28,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
- obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
- obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
- obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
-+obj-$(CONFIG_KRAITCC) += krait-cc.o
---- /dev/null
-+++ b/drivers/clk/qcom/krait-cc.c
-@@ -0,0 +1,352 @@
-+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/slab.h>
-+
-+#include "clk-krait.h"
-+
-+static unsigned int sec_mux_map[] = {
-+ 2,
-+ 0,
-+};
-+
-+static unsigned int pri_mux_map[] = {
-+ 1,
-+ 2,
-+ 0,
-+};
-+
-+static int
-+krait_add_div(struct device *dev, int id, const char *s, unsigned offset)
-+{
-+ struct krait_div2_clk *div;
-+ struct clk_init_data init = {
-+ .num_parents = 1,
-+ .ops = &krait_div2_clk_ops,
-+ .flags = CLK_SET_RATE_PARENT,
-+ };
-+ const char *p_names[1];
-+ struct clk *clk;
-+
-+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
-+ if (!div)
-+ return -ENOMEM;
-+
-+ div->width = 2;
-+ div->shift = 6;
-+ div->lpl = id >= 0;
-+ div->offset = offset;
-+ div->hw.init = &init;
-+
-+ init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
-+ if (!init.name)
-+ return -ENOMEM;
-+
-+ init.parent_names = p_names;
-+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
-+ if (!p_names[0]) {
-+ kfree(init.name);
-+ return -ENOMEM;
-+ }
-+
-+ clk = devm_clk_register(dev, &div->hw);
-+ kfree(p_names[0]);
-+ kfree(init.name);
-+
-+ return PTR_ERR_OR_ZERO(clk);
-+}
-+
-+static int
-+krait_add_sec_mux(struct device *dev, int id, const char *s, unsigned offset,
-+ bool unique_aux)
-+{
-+ struct krait_mux_clk *mux;
-+ static const char *sec_mux_list[] = {
-+ "acpu_aux",
-+ "qsb",
-+ };
-+ struct clk_init_data init = {
-+ .parent_names = sec_mux_list,
-+ .num_parents = ARRAY_SIZE(sec_mux_list),
-+ .ops = &krait_mux_clk_ops,
-+ .flags = CLK_SET_RATE_PARENT,
-+ };
-+ struct clk *clk;
-+
-+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
-+ if (!mux)
-+ return -ENOMEM;
-+
-+ mux->offset = offset;
-+ mux->lpl = id >= 0;
-+ mux->has_safe_parent = true;
-+ mux->safe_sel = 2;
-+ mux->mask = 0x3;
-+ mux->shift = 2;
-+ mux->parent_map = sec_mux_map;
-+ mux->hw.init = &init;
-+
-+ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
-+ if (!init.name)
-+ return -ENOMEM;
-+
-+ if (unique_aux) {
-+ sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
-+ if (!sec_mux_list[0]) {
-+ clk = ERR_PTR(-ENOMEM);
-+ goto err_aux;
-+ }
-+ }
-+
-+ clk = devm_clk_register(dev, &mux->hw);
-+
-+ if (unique_aux)
-+ kfree(sec_mux_list[0]);
-+err_aux:
-+ kfree(init.name);
-+ return PTR_ERR_OR_ZERO(clk);
-+}
-+
-+static struct clk *
-+krait_add_pri_mux(struct device *dev, int id, const char *s, unsigned offset)
-+{
-+ struct krait_mux_clk *mux;
-+ const char *p_names[3];
-+ struct clk_init_data init = {
-+ .parent_names = p_names,
-+ .num_parents = ARRAY_SIZE(p_names),
-+ .ops = &krait_mux_clk_ops,
-+ .flags = CLK_SET_RATE_PARENT,
-+ };
-+ struct clk *clk;
-+
-+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
-+ if (!mux)
-+ return ERR_PTR(-ENOMEM);
-+
-+ mux->has_safe_parent = true;
-+ mux->safe_sel = 0;
-+ mux->mask = 0x3;
-+ mux->shift = 0;
-+ mux->offset = offset;
-+ mux->lpl = id >= 0;
-+ mux->parent_map = pri_mux_map;
-+ mux->hw.init = &init;
-+
-+ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
-+ if (!init.name)
-+ return ERR_PTR(-ENOMEM);
-+
-+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
-+ if (!p_names[0]) {
-+ clk = ERR_PTR(-ENOMEM);
-+ goto err_p0;
-+ }
-+
-+ p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
-+ if (!p_names[1]) {
-+ clk = ERR_PTR(-ENOMEM);
-+ goto err_p1;
-+ }
-+
-+ p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
-+ if (!p_names[2]) {
-+ clk = ERR_PTR(-ENOMEM);
-+ goto err_p2;
-+ }
-+
-+ clk = devm_clk_register(dev, &mux->hw);
-+
-+ kfree(p_names[2]);
-+err_p2:
-+ kfree(p_names[1]);
-+err_p1:
-+ kfree(p_names[0]);
-+err_p0:
-+ kfree(init.name);
-+ return clk;
-+}
-+
-+/* id < 0 for L2, otherwise id == physical CPU number */
-+static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
-+{
-+ int ret;
-+ unsigned offset;
-+ void *p = NULL;
-+ const char *s;
-+ struct clk *clk;
-+
-+ if (id >= 0) {
-+ offset = 0x4501 + (0x1000 * id);
-+ s = p = kasprintf(GFP_KERNEL, "%d", id);
-+ if (!s)
-+ return ERR_PTR(-ENOMEM);
-+ } else {
-+ offset = 0x500;
-+ s = "_l2";
-+ }
-+
-+ ret = krait_add_div(dev, id, s, offset);
-+ if (ret) {
-+ clk = ERR_PTR(ret);
-+ goto err;
-+ }
-+
-+ ret = krait_add_sec_mux(dev, id, s, offset, unique_aux);
-+ if (ret) {
-+ clk = ERR_PTR(ret);
-+ goto err;
-+ }
-+
-+ clk = krait_add_pri_mux(dev, id, s, offset);
-+err:
-+ kfree(p);
-+ return clk;
-+}
-+
-+static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
-+{
-+ unsigned int idx = clkspec->args[0];
-+ struct clk **clks = data;
-+
-+ if (idx >= 5) {
-+ pr_err("%s: invalid clock index %d\n", __func__, idx);
-+ return ERR_PTR(-EINVAL);
-+ }
-+
-+ return clks[idx] ? : ERR_PTR(-ENODEV);
-+}
-+
-+static const struct of_device_id krait_cc_match_table[] = {
-+ { .compatible = "qcom,krait-cc-v1", (void *)1UL },
-+ { .compatible = "qcom,krait-cc-v2" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, krait_cc_match_table);
-+
-+static int krait_cc_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ const struct of_device_id *id;
-+ unsigned long cur_rate, aux_rate;
-+ int cpu;
-+ struct clk *clk;
-+ struct clk **clks;
-+ struct clk *l2_pri_mux_clk;
-+
-+ id = of_match_device(krait_cc_match_table, dev);
-+ if (!id)
-+ return -ENODEV;
-+
-+ /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */
-+ clk = clk_register_fixed_rate(dev, "qsb", NULL, CLK_IS_ROOT, 1);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+
-+ if (!id->data) {
-+ clk = clk_register_fixed_factor(dev, "acpu_aux",
-+ "gpll0_vote", 0, 1, 2);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+ }
-+
-+ /* Krait configurations have at most 4 CPUs and one L2 */
-+ clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL);
-+ if (!clks)
-+ return -ENOMEM;
-+
-+ for_each_possible_cpu(cpu) {
-+ clk = krait_add_clks(dev, cpu, id->data);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+ clks[cpu] = clk;
-+ }
-+
-+ l2_pri_mux_clk = krait_add_clks(dev, -1, id->data);
-+ if (IS_ERR(l2_pri_mux_clk))
-+ return PTR_ERR(l2_pri_mux_clk);
-+ clks[4] = l2_pri_mux_clk;
-+
-+ /*
-+ * We don't want the CPU or L2 clocks to be turned off at late init
-+ * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the
-+ * refcount of these clocks. Any cpufreq/hotplug manager can assume
-+ * that the clocks have already been prepared and enabled by the time
-+ * they take over.
-+ */
-+ for_each_online_cpu(cpu) {
-+ clk_prepare_enable(l2_pri_mux_clk);
-+ WARN(clk_prepare_enable(clks[cpu]),
-+ "Unable to turn on CPU%d clock", cpu);
-+ }
-+
-+ /*
-+ * Force reinit of HFPLLs and muxes to overwrite any potential
-+ * incorrect configuration of HFPLLs and muxes by the bootloader.
-+ * While at it, also make sure the cores are running at known rates
-+ * and print the current rate.
-+ *
-+ * The clocks are set to aux clock rate first to make sure the
-+ * secondary mux is not sourcing off of QSB. The rate is then set to
-+ * two different rates to force a HFPLL reinit under all
-+ * circumstances.
-+ */
-+ cur_rate = clk_get_rate(l2_pri_mux_clk);
-+ aux_rate = 384000000;
-+ if (cur_rate == 1) {
-+ pr_info("L2 @ QSB rate. Forcing new rate.\n");
-+ cur_rate = aux_rate;
-+ }
-+ clk_set_rate(l2_pri_mux_clk, aux_rate);
-+ clk_set_rate(l2_pri_mux_clk, 2);
-+ clk_set_rate(l2_pri_mux_clk, cur_rate);
-+ pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000);
-+ for_each_possible_cpu(cpu) {
-+ clk = clks[cpu];
-+ cur_rate = clk_get_rate(clk);
-+ if (cur_rate == 1) {
-+ pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu);
-+ cur_rate = aux_rate;
-+ }
-+ clk_set_rate(clk, aux_rate);
-+ clk_set_rate(clk, 2);
-+ clk_set_rate(clk, cur_rate);
-+ pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
-+ }
-+
-+ of_clk_add_provider(dev->of_node, krait_of_get, clks);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver krait_cc_driver = {
-+ .probe = krait_cc_probe,
-+ .driver = {
-+ .name = "krait-cc",
-+ .of_match_table = krait_cc_match_table,
-+ },
-+};
-+module_platform_driver(krait_cc_driver);
-+
-+MODULE_DESCRIPTION("Krait CPU Clock Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:krait-cc");
diff --git a/target/linux/ipq806x/patches-4.4/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch b/target/linux/ipq806x/patches-4.4/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
deleted file mode 100644
index e8d8ddf674..0000000000
--- a/target/linux/ipq806x/patches-4.4/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
+++ /dev/null
@@ -1,304 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,12/13] cpufreq: Add module to register cpufreq on Krait CPUs
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063191
-Message-Id: <1426920332-9340-13-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
-Date: Fri, 20 Mar 2015 23:45:31 -0700
-
-Register a cpufreq-generic device whenever we detect that a
-"qcom,krait" compatible CPU is present in DT.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-.../devicetree/bindings/arm/msm/qcom,pvs.txt | 38 ++++
- drivers/cpufreq/Kconfig.arm | 9 +
- drivers/cpufreq/Makefile | 1 +
- drivers/cpufreq/qcom-cpufreq.c | 204 +++++++++++++++++++++
- 4 files changed, 252 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
- create mode 100644 drivers/cpufreq/qcom-cpufreq.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
-@@ -0,0 +1,38 @@
-+Qualcomm Process Voltage Scaling Tables
-+
-+The node name is required to be "qcom,pvs". There shall only be one
-+such node present in the root of the tree.
-+
-+PROPERTIES
-+
-+- qcom,pvs-format-a or qcom,pvs-format-b:
-+ Usage: required
-+ Value type: <empty>
-+ Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties.
-+ If qcom,pvs-format-a is used the table is two columns
-+ (frequency and voltage in that order). If qcom,pvs-format-b is used the table is three columns (frequency, voltage,
-+ and current in that order).
-+
-+- qcom,speedX-pvsY-bin-vZ:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: The PVS table corresponding to the speed bin X, pvs bin Y,
-+ and version Z.
-+Example:
-+
-+ qcom,pvs {
-+ qcom,pvs-format-a;
-+ qcom,speed0-pvs0-bin-v0 =
-+ < 384000000 950000 >,
-+ < 486000000 975000 >,
-+ < 594000000 1000000 >,
-+ < 702000000 1025000 >,
-+ < 810000000 1075000 >,
-+ < 918000000 1100000 >,
-+ < 1026000000 1125000 >,
-+ < 1134000000 1175000 >,
-+ < 1242000000 1200000 >,
-+ < 1350000000 1225000 >,
-+ < 1458000000 1237500 >,
-+ < 1512000000 1250000 >;
-+ };
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -95,6 +95,15 @@ config ARM_OMAP2PLUS_CPUFREQ
- depends on ARCH_OMAP2PLUS
- default ARCH_OMAP2PLUS
-
-+config ARM_QCOM_CPUFREQ
-+ tristate "Qualcomm based"
-+ depends on ARCH_QCOM
-+ select PM_OPP
-+ help
-+ This adds the CPUFreq driver for Qualcomm SoC based boards.
-+
-+ If in doubt, say N.
-+
- config ARM_S3C_CPUFREQ
- bool
- help
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt81
- obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
- obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
- obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
-+obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o
- obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
- obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
- obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
---- /dev/null
-+++ b/drivers/cpufreq/qcom-cpufreq.c
-@@ -0,0 +1,204 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/cpu.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/slab.h>
-+#include <linux/cpufreq-dt.h>
-+
-+static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver)
-+{
-+ void __iomem *base;
-+ u32 pte_efuse;
-+
-+ *speed = *pvs = *pvs_ver = 0;
-+
-+ base = ioremap(0x007000c0, 4);
-+ if (!base) {
-+ pr_warn("Unable to read efuse data. Defaulting to 0!\n");
-+ return;
-+ }
-+
-+ pte_efuse = readl_relaxed(base);
-+ iounmap(base);
-+
-+ *speed = pte_efuse & 0xf;
-+ if (*speed == 0xf)
-+ *speed = (pte_efuse >> 4) & 0xf;
-+
-+ if (*speed == 0xf) {
-+ *speed = 0;
-+ pr_warn("Speed bin: Defaulting to %d\n", *speed);
-+ } else {
-+ pr_info("Speed bin: %d\n", *speed);
-+ }
-+
-+ *pvs = (pte_efuse >> 10) & 0x7;
-+ if (*pvs == 0x7)
-+ *pvs = (pte_efuse >> 13) & 0x7;
-+
-+ if (*pvs == 0x7) {
-+ *pvs = 0;
-+ pr_warn("PVS bin: Defaulting to %d\n", *pvs);
-+ } else {
-+ pr_info("PVS bin: %d\n", *pvs);
-+ }
-+}
-+
-+static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver)
-+{
-+ u32 pte_efuse, redundant_sel;
-+ void __iomem *base;
-+
-+ *speed = 0;
-+ *pvs = 0;
-+ *pvs_ver = 0;
-+
-+ base = ioremap(0xfc4b80b0, 8);
-+ if (!base) {
-+ pr_warn("Unable to read efuse data. Defaulting to 0!\n");
-+ return;
-+ }
-+
-+ pte_efuse = readl_relaxed(base);
-+ redundant_sel = (pte_efuse >> 24) & 0x7;
-+ *speed = pte_efuse & 0x7;
-+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
-+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
-+ *pvs_ver = (pte_efuse >> 4) & 0x3;
-+
-+ switch (redundant_sel) {
-+ case 1:
-+ *speed = (pte_efuse >> 27) & 0xf;
-+ break;
-+ case 2:
-+ *pvs = (pte_efuse >> 27) & 0xf;
-+ break;
-+ }
-+
-+ /* Check SPEED_BIN_BLOW_STATUS */
-+ if (pte_efuse & BIT(3)) {
-+ pr_info("Speed bin: %d\n", *speed);
-+ } else {
-+ pr_warn("Speed bin not set. Defaulting to 0!\n");
-+ *speed = 0;
-+ }
-+
-+ /* Check PVS_BLOW_STATUS */
-+ pte_efuse = readl_relaxed(base + 0x4) & BIT(21);
-+ if (pte_efuse) {
-+ pr_info("PVS bin: %d\n", *pvs);
-+ } else {
-+ pr_warn("PVS bin not set. Defaulting to 0!\n");
-+ *pvs = 0;
-+ }
-+
-+ pr_info("PVS version: %d\n", *pvs_ver);
-+ iounmap(base);
-+}
-+
-+static int __init qcom_cpufreq_populate_opps(void)
-+{
-+ int len, rows, cols, i, k, speed, pvs, pvs_ver;
-+ char table_name[] = "qcom,speedXX-pvsXX-bin-vXX";
-+ struct device_node *np;
-+ struct device *dev;
-+ int cpu = 0;
-+
-+ np = of_find_node_by_name(NULL, "qcom,pvs");
-+ if (!np)
-+ return -ENODEV;
-+
-+ if (of_property_read_bool(np, "qcom,pvs-format-a")) {
-+ get_krait_bin_format_a(&speed, &pvs, &pvs_ver);
-+ cols = 2;
-+ } else if (of_property_read_bool(np, "qcom,pvs-format-b")) {
-+ get_krait_bin_format_b(&speed, &pvs, &pvs_ver);
-+ cols = 3;
-+ } else {
-+ return -ENODEV;
-+ }
-+
-+ snprintf(table_name, sizeof(table_name),
-+ "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver);
-+
-+ if (!of_find_property(np, table_name, &len))
-+ return -EINVAL;
-+
-+ len /= sizeof(u32);
-+ if (len % cols || len == 0)
-+ return -EINVAL;
-+
-+ rows = len / cols;
-+
-+ for (i = 0, k = 0; i < rows; i++) {
-+ u32 freq, volt;
-+
-+ of_property_read_u32_index(np, table_name, k++, &freq);
-+ of_property_read_u32_index(np, table_name, k++, &volt);
-+ while (k % cols)
-+ k++; /* Skip uA entries if present */
-+ for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
-+ dev = get_cpu_device(cpu);
-+ if (!dev)
-+ return -ENODEV;
-+ if (dev_pm_opp_add(dev, freq, volt))
-+ pr_warn("failed to add OPP %u\n", freq);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int __init qcom_cpufreq_driver_init(void)
-+{
-+ struct cpufreq_dt_platform_data pdata = { .independent_clocks = true };
-+ struct platform_device_info devinfo = {
-+ .name = "cpufreq-dt",
-+ .data = &pdata,
-+ .size_data = sizeof(pdata),
-+ };
-+ struct device *cpu_dev;
-+ struct device_node *np;
-+ int ret;
-+
-+ cpu_dev = get_cpu_device(0);
-+ if (!cpu_dev)
-+ return -ENODEV;
-+
-+ np = of_node_get(cpu_dev->of_node);
-+ if (!np)
-+ return -ENOENT;
-+
-+ if (!of_device_is_compatible(np, "qcom,krait")) {
-+ of_node_put(np);
-+ return -ENODEV;
-+ }
-+ of_node_put(np);
-+
-+ ret = qcom_cpufreq_populate_opps();
-+ if (ret)
-+ return ret;
-+
-+ return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo));
-+}
-+module_init(qcom_cpufreq_driver_init);
-+
-+MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
deleted file mode 100644
index 45870c436a..0000000000
--- a/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
+++ /dev/null
@@ -1,96 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -26,6 +26,11 @@
- next-level-cache = <&L2>;
- qcom,acc = <&acc0>;
- qcom,saw = <&saw0>;
-+ clocks = <&kraitcc 0>, <&kraitcc 4>;
-+ clock-names = "cpu", "l2";
-+ clock-latency = <100000>;
-+ cpu-supply = <&smb208_s2a>;
-+ voltage-tolerance = <5>;
- };
-
- cpu@1 {
-@@ -36,12 +41,20 @@
- next-level-cache = <&L2>;
- qcom,acc = <&acc1>;
- qcom,saw = <&saw1>;
-+ clocks = <&kraitcc 1>, <&kraitcc 4>;
-+ clock-names = "cpu", "l2";
-+ clock-latency = <100000>;
-+ cpu-supply = <&smb208_s2b>;
- };
-
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
-+
-+ qcom,l2 {
-+ qcom,l2-rates = <384000000 1000000000 1200000000>;
-+ };
- };
-
- cpu-pmu {
-@@ -73,6 +86,46 @@
- };
- };
-
-+ kraitcc: clock-controller {
-+ compatible = "qcom,krait-cc-v1";
-+ #clock-cells = <1>;
-+ };
-+
-+ qcom,pvs {
-+ qcom,pvs-format-a;
-+ qcom,speed0-pvs0-bin-v0 =
-+ < 1400000000 1250000 >,
-+ < 1200000000 1200000 >,
-+ < 1000000000 1150000 >,
-+ < 800000000 1100000 >,
-+ < 600000000 1050000 >,
-+ < 384000000 1000000 >;
-+
-+ qcom,speed0-pvs1-bin-v0 =
-+ < 1400000000 1175000 >,
-+ < 1200000000 1125000 >,
-+ < 1000000000 1075000 >,
-+ < 800000000 1025000 >,
-+ < 600000000 975000 >,
-+ < 384000000 925000 >;
-+
-+ qcom,speed0-pvs2-bin-v0 =
-+ < 1400000000 1125000 >,
-+ < 1200000000 1075000 >,
-+ < 1000000000 1025000 >,
-+ < 800000000 995000 >,
-+ < 600000000 925000 >,
-+ < 384000000 875000 >;
-+
-+ qcom,speed0-pvs3-bin-v0 =
-+ < 1400000000 1050000 >,
-+ < 1200000000 1000000 >,
-+ < 1000000000 950000 >,
-+ < 800000000 900000 >,
-+ < 600000000 850000 >,
-+ < 384000000 800000 >;
-+ };
-+
- soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
-@@ -216,11 +269,13 @@
- acc0: clock-controller@2088000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-+ clock-output-names = "acpu0_aux";
- };
-
- acc1: clock-controller@2098000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-+ clock-output-names = "acpu1_aux";
- };
-
- l2cc: clock-controller@2011000 {
diff --git a/target/linux/ipq806x/patches-4.4/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-4.4/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
deleted file mode 100644
index 4f5c0efb7b..0000000000
--- a/target/linux/ipq806x/patches-4.4/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v6,1/2] dt/bindings: qcom_adm: Fix channel specifiers
-From: Andy Gross <agross@codeaurora.org>
-X-Patchwork-Id: 6027361
-Message-Id: <1426571172-9711-2-git-send-email-agross@codeaurora.org>
-To: Vinod Koul <vinod.koul@intel.com>
-Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
- Bjorn Andersson <bjorn.andersson@sonymobile.com>,
- Andy Gross <agross@codeaurora.org>
-Date: Tue, 17 Mar 2015 00:46:11 -0500
-
-This patch removes the crci information from the dma channel property. At least
-one client device requires using more than one CRCI value for a channel. This
-does not match the current binding and the crci information needs to be removed.
-
-Instead, the client device will provide this information via other means.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
-
----
-Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
- 1 file changed, 6 insertions(+), 10 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
-+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
-@@ -4,8 +4,7 @@ Required properties:
- - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- - reg: Address range for DMA registers
- - interrupts: Should contain one interrupt shared by all channels
--- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
-- denotes CRCI (client rate control interface) flow control assignment.
-+- #dma-cells: must be <1>. First cell denotes the channel number.
- - clocks: Should contain the core clock and interface clock.
- - clock-names: Must contain "core" for the core clock and "iface" for the
- interface clock.
-@@ -22,7 +21,7 @@ Example:
- compatible = "qcom,adm";
- reg = <0x18300000 0x100000>;
- interrupts = <0 170 0>;
-- #dma-cells = <2>;
-+ #dma-cells = <1>;
-
- clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
- clock-names = "core", "iface";
-@@ -35,15 +34,12 @@ Example:
- qcom,ee = <0>;
- };
-
--DMA clients must use the format descripted in the dma.txt file, using a three
-+DMA clients must use the format descripted in the dma.txt file, using a two
- cell specifier for each channel.
-
--Each dmas request consists of 3 cells:
-+Each dmas request consists of two cells:
- 1. phandle pointing to the DMA controller
- 2. channel number
-- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
-- The CRCI is used for flow control. It identifies the peripheral device that
-- is the source/destination for the transferred data.
-
- Example:
-
-@@ -56,7 +52,7 @@ Example:
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
-- dmas = <&adm_dma 6 9>,
-- <&adm_dma 5 10>;
-+ dmas = <&adm_dma 6>,
-+ <&adm_dma 5>;
- dma-names = "rx", "tx";
- };
diff --git a/target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch b/target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch
deleted file mode 100644
index 02038aa942..0000000000
--- a/target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch
+++ /dev/null
@@ -1,964 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v6,2/2] dmaengine: Add ADM driver
-From: Andy Gross <agross@codeaurora.org>
-X-Patchwork-Id: 6027351
-Message-Id: <1426571172-9711-3-git-send-email-agross@codeaurora.org>
-To: Vinod Koul <vinod.koul@intel.com>
-Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
- Bjorn Andersson <bjorn.andersson@sonymobile.com>,
- Andy Gross <agross@codeaurora.org>
-Date: Tue, 17 Mar 2015 00:46:12 -0500
-
-Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
-controller found in the MSM8x60 and IPQ/APQ8064 platforms.
-
-The ADM supports both memory to memory transactions and memory
-to/from peripheral device transactions. The controller also provides flow
-control capabilities for transactions to/from peripheral devices.
-
-The initial release of this driver supports slave transfers to/from peripherals
-and also incorporates CRCI (client rate control interface) flow control.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
-Reviewed-by: sricharan <sricharan@codeaurora.org>
-
----
-drivers/dma/Kconfig | 10 +
- drivers/dma/Makefile | 1 +
- drivers/dma/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 911 insertions(+)
- create mode 100644 drivers/dma/qcom_adm.c
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -558,4 +558,14 @@ config DMATEST
- config DMA_ENGINE_RAID
- bool
-
-+config QCOM_ADM
-+ tristate "Qualcomm ADM support"
-+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
-+ select DMA_ENGINE
-+ select DMA_VIRTUAL_CHANNELS
-+ ---help---
-+ Enable support for the Qualcomm ADM DMA controller. This controller
-+ provides DMA capabilities for both general purpose and on-chip
-+ peripheral devices.
-+
- endif
---- /dev/null
-+++ b/drivers/dma/qcom_adm.c
-@@ -0,0 +1,900 @@
-+/*
-+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/scatterlist.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_dma.h>
-+#include <linux/reset.h>
-+#include <linux/clk.h>
-+#include <linux/dmaengine.h>
-+
-+#include "dmaengine.h"
-+#include "virt-dma.h"
-+
-+/* ADM registers - calculated from channel number and security domain */
-+#define ADM_CHAN_MULTI 0x4
-+#define ADM_CI_MULTI 0x4
-+#define ADM_CRCI_MULTI 0x4
-+#define ADM_EE_MULTI 0x800
-+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
-+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
-+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
-+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
-+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
-+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
-+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
-+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
-+#define ADM_GP_CTL 0x3d8
-+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
-+ ADM_EE_OFFS(ee))
-+
-+/* channel status */
-+#define ADM_CH_STATUS_VALID BIT(1)
-+
-+/* channel result */
-+#define ADM_CH_RSLT_VALID BIT(31)
-+#define ADM_CH_RSLT_ERR BIT(3)
-+#define ADM_CH_RSLT_FLUSH BIT(2)
-+#define ADM_CH_RSLT_TPD BIT(1)
-+
-+/* channel conf */
-+#define ADM_CH_CONF_SHADOW_EN BIT(12)
-+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
-+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
-+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
-+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
-+
-+/* channel result conf */
-+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
-+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
-+
-+/* CRCI CTL */
-+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
-+#define ADM_CRCI_CTL_RST BIT(17)
-+
-+/* CI configuration */
-+#define ADM_CI_RANGE_END(x) (x << 24)
-+#define ADM_CI_RANGE_START(x) (x << 16)
-+#define ADM_CI_BURST_4_WORDS BIT(2)
-+#define ADM_CI_BURST_8_WORDS BIT(3)
-+
-+/* GP CTL */
-+#define ADM_GP_CTL_LP_EN BIT(12)
-+#define ADM_GP_CTL_LP_CNT(x) (x << 8)
-+
-+/* Command pointer list entry */
-+#define ADM_CPLE_LP BIT(31)
-+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
-+
-+/* Command list entry */
-+#define ADM_CMD_LC BIT(31)
-+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
-+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
-+
-+#define ADM_CMD_TYPE_SINGLE 0x0
-+#define ADM_CMD_TYPE_BOX 0x3
-+
-+#define ADM_CRCI_MUX_SEL BIT(4)
-+#define ADM_DESC_ALIGN 8
-+#define ADM_MAX_XFER (SZ_64K-1)
-+#define ADM_MAX_ROWS (SZ_64K-1)
-+#define ADM_MAX_CHANNELS 16
-+
-+struct adm_desc_hw_box {
-+ u32 cmd;
-+ u32 src_addr;
-+ u32 dst_addr;
-+ u32 row_len;
-+ u32 num_rows;
-+ u32 row_offset;
-+};
-+
-+struct adm_desc_hw_single {
-+ u32 cmd;
-+ u32 src_addr;
-+ u32 dst_addr;
-+ u32 len;
-+};
-+
-+struct adm_async_desc {
-+ struct virt_dma_desc vd;
-+ struct adm_device *adev;
-+
-+ size_t length;
-+ enum dma_transfer_direction dir;
-+ dma_addr_t dma_addr;
-+ size_t dma_len;
-+
-+ void *cpl;
-+ dma_addr_t cp_addr;
-+ u32 crci;
-+ u32 mux;
-+ u32 blk_size;
-+};
-+
-+struct adm_chan {
-+ struct virt_dma_chan vc;
-+ struct adm_device *adev;
-+
-+ /* parsed from DT */
-+ u32 id; /* channel id */
-+
-+ struct adm_async_desc *curr_txd;
-+ struct dma_slave_config slave;
-+ struct list_head node;
-+
-+ int error;
-+ int initialized;
-+};
-+
-+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
-+{
-+ return container_of(common, struct adm_chan, vc.chan);
-+}
-+
-+struct adm_device {
-+ void __iomem *regs;
-+ struct device *dev;
-+ struct dma_device common;
-+ struct device_dma_parameters dma_parms;
-+ struct adm_chan *channels;
-+
-+ u32 ee;
-+
-+ struct clk *core_clk;
-+ struct clk *iface_clk;
-+
-+ struct reset_control *clk_reset;
-+ struct reset_control *c0_reset;
-+ struct reset_control *c1_reset;
-+ struct reset_control *c2_reset;
-+ int irq;
-+};
-+
-+/**
-+ * adm_free_chan - Frees dma resources associated with the specific channel
-+ *
-+ * Free all allocated descriptors associated with this channel
-+ *
-+ */
-+static void adm_free_chan(struct dma_chan *chan)
-+{
-+ /* free all queued descriptors */
-+ vchan_free_chan_resources(to_virt_chan(chan));
-+}
-+
-+/**
-+ * adm_get_blksize - Get block size from burst value
-+ *
-+ */
-+static int adm_get_blksize(unsigned int burst)
-+{
-+ int ret;
-+
-+ switch (burst) {
-+ case 16:
-+ case 32:
-+ case 64:
-+ case 128:
-+ ret = ffs(burst>>4) - 1;
-+ break;
-+ case 192:
-+ ret = 4;
-+ break;
-+ case 256:
-+ ret = 5;
-+ break;
-+ default:
-+ ret = -EINVAL;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+/**
-+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
-+ *
-+ * @achan: ADM channel
-+ * @desc: Descriptor memory pointer
-+ * @sg: Scatterlist entry
-+ * @crci: CRCI value
-+ * @burst: Burst size of transaction
-+ * @direction: DMA transfer direction
-+ */
-+static void *adm_process_fc_descriptors(struct adm_chan *achan,
-+ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
-+ enum dma_transfer_direction direction)
-+{
-+ struct adm_desc_hw_box *box_desc = NULL;
-+ struct adm_desc_hw_single *single_desc;
-+ u32 remainder = sg_dma_len(sg);
-+ u32 rows, row_offset, crci_cmd;
-+ u32 mem_addr = sg_dma_address(sg);
-+ u32 *incr_addr = &mem_addr;
-+ u32 *src, *dst;
-+
-+ if (direction == DMA_DEV_TO_MEM) {
-+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
-+ row_offset = burst;
-+ src = &achan->slave.src_addr;
-+ dst = &mem_addr;
-+ } else {
-+ crci_cmd = ADM_CMD_DST_CRCI(crci);
-+ row_offset = burst << 16;
-+ src = &mem_addr;
-+ dst = &achan->slave.dst_addr;
-+ }
-+
-+ while (remainder >= burst) {
-+ box_desc = desc;
-+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
-+ box_desc->row_offset = row_offset;
-+ box_desc->src_addr = *src;
-+ box_desc->dst_addr = *dst;
-+
-+ rows = remainder / burst;
-+ rows = min_t(u32, rows, ADM_MAX_ROWS);
-+ box_desc->num_rows = rows << 16 | rows;
-+ box_desc->row_len = burst << 16 | burst;
-+
-+ *incr_addr += burst * rows;
-+ remainder -= burst * rows;
-+ desc += sizeof(*box_desc);
-+ }
-+
-+ /* if leftover bytes, do one single descriptor */
-+ if (remainder) {
-+ single_desc = desc;
-+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
-+ single_desc->len = remainder;
-+ single_desc->src_addr = *src;
-+ single_desc->dst_addr = *dst;
-+ desc += sizeof(*single_desc);
-+
-+ if (sg_is_last(sg))
-+ single_desc->cmd |= ADM_CMD_LC;
-+ } else {
-+ if (box_desc && sg_is_last(sg))
-+ box_desc->cmd |= ADM_CMD_LC;
-+ }
-+
-+ return desc;
-+}
-+
-+/**
-+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
-+ *
-+ * @achan: ADM channel
-+ * @desc: Descriptor memory pointer
-+ * @sg: Scatterlist entry
-+ * @direction: DMA transfer direction
-+ */
-+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
-+ void *desc, struct scatterlist *sg,
-+ enum dma_transfer_direction direction)
-+{
-+ struct adm_desc_hw_single *single_desc;
-+ u32 remainder = sg_dma_len(sg);
-+ u32 mem_addr = sg_dma_address(sg);
-+ u32 *incr_addr = &mem_addr;
-+ u32 *src, *dst;
-+
-+ if (direction == DMA_DEV_TO_MEM) {
-+ src = &achan->slave.src_addr;
-+ dst = &mem_addr;
-+ } else {
-+ src = &mem_addr;
-+ dst = &achan->slave.dst_addr;
-+ }
-+
-+ do {
-+ single_desc = desc;
-+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
-+ single_desc->src_addr = *src;
-+ single_desc->dst_addr = *dst;
-+ single_desc->len = (remainder > ADM_MAX_XFER) ?
-+ ADM_MAX_XFER : remainder;
-+
-+ remainder -= single_desc->len;
-+ *incr_addr += single_desc->len;
-+ desc += sizeof(*single_desc);
-+ } while (remainder);
-+
-+ /* set last command if this is the end of the whole transaction */
-+ if (sg_is_last(sg))
-+ single_desc->cmd |= ADM_CMD_LC;
-+
-+ return desc;
-+}
-+
-+/**
-+ * adm_prep_slave_sg - Prep slave sg transaction
-+ *
-+ * @chan: dma channel
-+ * @sgl: scatter gather list
-+ * @sg_len: length of sg
-+ * @direction: DMA transfer direction
-+ * @flags: DMA flags
-+ * @context: transfer context (unused)
-+ */
-+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
-+ struct scatterlist *sgl, unsigned int sg_len,
-+ enum dma_transfer_direction direction, unsigned long flags,
-+ void *context)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ struct adm_device *adev = achan->adev;
-+ struct adm_async_desc *async_desc;
-+ struct scatterlist *sg;
-+ u32 i, burst;
-+ u32 single_count = 0, box_count = 0, crci = 0;
-+ void *desc;
-+ u32 *cple;
-+ int blk_size = 0;
-+
-+ if (!is_slave_direction(direction)) {
-+ dev_err(adev->dev, "invalid dma direction\n");
-+ return NULL;
-+ }
-+
-+ /*
-+ * get burst value from slave configuration
-+ */
-+ burst = (direction == DMA_MEM_TO_DEV) ?
-+ achan->slave.dst_maxburst :
-+ achan->slave.src_maxburst;
-+
-+ /* if using flow control, validate burst and crci values */
-+ if (achan->slave.device_fc) {
-+
-+ blk_size = adm_get_blksize(burst);
-+ if (blk_size < 0) {
-+ dev_err(adev->dev, "invalid burst value: %d\n",
-+ burst);
-+ return ERR_PTR(-EINVAL);
-+ }
-+
-+ crci = achan->slave.slave_id & 0xf;
-+ if (!crci || achan->slave.slave_id > 0x1f) {
-+ dev_err(adev->dev, "invalid crci value\n");
-+ return ERR_PTR(-EINVAL);
-+ }
-+ }
-+
-+ /* iterate through sgs and compute allocation size of structures */
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ if (achan->slave.device_fc) {
-+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
-+ ADM_MAX_ROWS);
-+ if (sg_dma_len(sg) % burst)
-+ single_count++;
-+ } else {
-+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
-+ ADM_MAX_XFER);
-+ }
-+ }
-+
-+ async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
-+ if (!async_desc)
-+ return ERR_PTR(-ENOMEM);
-+
-+ if (crci)
-+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
-+ ADM_CRCI_CTL_MUX_SEL : 0;
-+ async_desc->crci = crci;
-+ async_desc->blk_size = blk_size;
-+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
-+ box_count * sizeof(struct adm_desc_hw_box) +
-+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
-+
-+ async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,
-+ &async_desc->dma_addr, GFP_NOWAIT);
-+
-+ if (!async_desc->cpl) {
-+ kfree(async_desc);
-+ return ERR_PTR(-ENOMEM);
-+ }
-+
-+ async_desc->adev = adev;
-+
-+ /* both command list entry and descriptors must be 8 byte aligned */
-+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
-+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
-+
-+ /* init cmd list */
-+ *cple = ADM_CPLE_LP;
-+ *cple |= (desc - async_desc->cpl + async_desc->dma_addr) >> 3;
-+
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ async_desc->length += sg_dma_len(sg);
-+
-+ if (achan->slave.device_fc)
-+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
-+ burst, direction);
-+ else
-+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
-+ direction);
-+ }
-+
-+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
-+}
-+
-+/**
-+ * adm_terminate_all - terminate all transactions on a channel
-+ * @achan: adm dma channel
-+ *
-+ * Dequeues and frees all transactions, aborts current transaction
-+ * No callbacks are done
-+ *
-+ */
-+static int adm_terminate_all(struct dma_chan *chan)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ struct adm_device *adev = achan->adev;
-+ unsigned long flags;
-+ LIST_HEAD(head);
-+
-+ spin_lock_irqsave(&achan->vc.lock, flags);
-+ vchan_get_all_descriptors(&achan->vc, &head);
-+
-+ /* send flush command to terminate current transaction */
-+ writel_relaxed(0x0,
-+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
-+
-+ spin_unlock_irqrestore(&achan->vc.lock, flags);
-+
-+ vchan_dma_desc_free_list(&achan->vc, &head);
-+
-+ return 0;
-+}
-+
-+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ unsigned long flag;
-+
-+ spin_lock_irqsave(&achan->vc.lock, flag);
-+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
-+ spin_unlock_irqrestore(&achan->vc.lock, flag);
-+
-+ return 0;
-+}
-+
-+/**
-+ * adm_start_dma - start next transaction
-+ * @achan - ADM dma channel
-+ */
-+static void adm_start_dma(struct adm_chan *achan)
-+{
-+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
-+ struct adm_device *adev = achan->adev;
-+ struct adm_async_desc *async_desc;
-+
-+ lockdep_assert_held(&achan->vc.lock);
-+
-+ if (!vd)
-+ return;
-+
-+ list_del(&vd->node);
-+
-+ /* write next command list out to the CMD FIFO */
-+ async_desc = container_of(vd, struct adm_async_desc, vd);
-+ achan->curr_txd = async_desc;
-+
-+ /* reset channel error */
-+ achan->error = 0;
-+
-+ if (!achan->initialized) {
-+ /* enable interrupts */
-+ writel(ADM_CH_CONF_SHADOW_EN |
-+ ADM_CH_CONF_PERM_MPU_CONF |
-+ ADM_CH_CONF_MPU_DISABLE |
-+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
-+ adev->regs + ADM_CH_CONF(achan->id));
-+
-+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
-+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
-+
-+ achan->initialized = 1;
-+ }
-+
-+ /* set the crci block size if this transaction requires CRCI */
-+ if (async_desc->crci) {
-+ writel(async_desc->mux | async_desc->blk_size,
-+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
-+ }
-+
-+ /* make sure IRQ enable doesn't get reordered */
-+ wmb();
-+
-+ /* write next command list out to the CMD FIFO */
-+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
-+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
-+}
-+
-+/**
-+ * adm_dma_irq - irq handler for ADM controller
-+ * @irq: IRQ of interrupt
-+ * @data: callback data
-+ *
-+ * IRQ handler for the bam controller
-+ */
-+static irqreturn_t adm_dma_irq(int irq, void *data)
-+{
-+ struct adm_device *adev = data;
-+ u32 srcs, i;
-+ struct adm_async_desc *async_desc;
-+ unsigned long flags;
-+
-+ srcs = readl_relaxed(adev->regs +
-+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
-+
-+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
-+ struct adm_chan *achan = &adev->channels[i];
-+ u32 status, result;
-+
-+ if (srcs & BIT(i)) {
-+ status = readl_relaxed(adev->regs +
-+ ADM_CH_STATUS_SD(i, adev->ee));
-+
-+ /* if no result present, skip */
-+ if (!(status & ADM_CH_STATUS_VALID))
-+ continue;
-+
-+ result = readl_relaxed(adev->regs +
-+ ADM_CH_RSLT(i, adev->ee));
-+
-+ /* no valid results, skip */
-+ if (!(result & ADM_CH_RSLT_VALID))
-+ continue;
-+
-+ /* flag error if transaction was flushed or failed */
-+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
-+ achan->error = 1;
-+
-+ spin_lock_irqsave(&achan->vc.lock, flags);
-+ async_desc = achan->curr_txd;
-+
-+ achan->curr_txd = NULL;
-+
-+ if (async_desc) {
-+ vchan_cookie_complete(&async_desc->vd);
-+
-+ /* kick off next DMA */
-+ adm_start_dma(achan);
-+ }
-+
-+ spin_unlock_irqrestore(&achan->vc.lock, flags);
-+ }
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/**
-+ * adm_tx_status - returns status of transaction
-+ * @chan: dma channel
-+ * @cookie: transaction cookie
-+ * @txstate: DMA transaction state
-+ *
-+ * Return status of dma transaction
-+ */
-+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
-+ struct dma_tx_state *txstate)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ struct virt_dma_desc *vd;
-+ enum dma_status ret;
-+ unsigned long flags;
-+ size_t residue = 0;
-+
-+ ret = dma_cookie_status(chan, cookie, txstate);
-+ if (ret == DMA_COMPLETE || !txstate)
-+ return ret;
-+
-+ spin_lock_irqsave(&achan->vc.lock, flags);
-+
-+ vd = vchan_find_desc(&achan->vc, cookie);
-+ if (vd)
-+ residue = container_of(vd, struct adm_async_desc, vd)->length;
-+
-+ spin_unlock_irqrestore(&achan->vc.lock, flags);
-+
-+ /*
-+ * residue is either the full length if it is in the issued list, or 0
-+ * if it is in progress. We have no reliable way of determining
-+ * anything inbetween
-+ */
-+ dma_set_residue(txstate, residue);
-+
-+ if (achan->error)
-+ return DMA_ERROR;
-+
-+ return ret;
-+}
-+
-+/**
-+ * adm_issue_pending - starts pending transactions
-+ * @chan: dma channel
-+ *
-+ * Issues all pending transactions and starts DMA
-+ */
-+static void adm_issue_pending(struct dma_chan *chan)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&achan->vc.lock, flags);
-+
-+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
-+ adm_start_dma(achan);
-+ spin_unlock_irqrestore(&achan->vc.lock, flags);
-+}
-+
-+/**
-+ * adm_dma_free_desc - free descriptor memory
-+ * @vd: virtual descriptor
-+ *
-+ */
-+static void adm_dma_free_desc(struct virt_dma_desc *vd)
-+{
-+ struct adm_async_desc *async_desc = container_of(vd,
-+ struct adm_async_desc, vd);
-+
-+ dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,
-+ async_desc->cpl, async_desc->dma_addr);
-+ kfree(async_desc);
-+}
-+
-+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
-+ u32 index)
-+{
-+ achan->id = index;
-+ achan->adev = adev;
-+
-+ vchan_init(&achan->vc, &adev->common);
-+ achan->vc.desc_free = adm_dma_free_desc;
-+}
-+
-+static int adm_dma_probe(struct platform_device *pdev)
-+{
-+ struct adm_device *adev;
-+ struct resource *iores;
-+ int ret;
-+ u32 i;
-+
-+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
-+ if (!adev)
-+ return -ENOMEM;
-+
-+ adev->dev = &pdev->dev;
-+
-+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
-+ if (IS_ERR(adev->regs))
-+ return PTR_ERR(adev->regs);
-+
-+ adev->irq = platform_get_irq(pdev, 0);
-+ if (adev->irq < 0)
-+ return adev->irq;
-+
-+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
-+ if (ret) {
-+ dev_err(adev->dev, "Execution environment unspecified\n");
-+ return ret;
-+ }
-+
-+ adev->core_clk = devm_clk_get(adev->dev, "core");
-+ if (IS_ERR(adev->core_clk))
-+ return PTR_ERR(adev->core_clk);
-+
-+ ret = clk_prepare_enable(adev->core_clk);
-+ if (ret) {
-+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
-+ return ret;
-+ }
-+
-+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
-+ if (IS_ERR(adev->iface_clk)) {
-+ ret = PTR_ERR(adev->iface_clk);
-+ goto err_disable_core_clk;
-+ }
-+
-+ ret = clk_prepare_enable(adev->iface_clk);
-+ if (ret) {
-+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
-+ goto err_disable_core_clk;
-+ }
-+
-+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
-+ if (IS_ERR(adev->clk_reset)) {
-+ dev_err(adev->dev, "failed to get ADM0 reset\n");
-+ ret = PTR_ERR(adev->clk_reset);
-+ goto err_disable_clks;
-+ }
-+
-+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
-+ if (IS_ERR(adev->c0_reset)) {
-+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
-+ ret = PTR_ERR(adev->c0_reset);
-+ goto err_disable_clks;
-+ }
-+
-+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
-+ if (IS_ERR(adev->c1_reset)) {
-+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
-+ ret = PTR_ERR(adev->c1_reset);
-+ goto err_disable_clks;
-+ }
-+
-+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
-+ if (IS_ERR(adev->c2_reset)) {
-+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
-+ ret = PTR_ERR(adev->c2_reset);
-+ goto err_disable_clks;
-+ }
-+
-+ reset_control_assert(adev->clk_reset);
-+ reset_control_assert(adev->c0_reset);
-+ reset_control_assert(adev->c1_reset);
-+ reset_control_assert(adev->c2_reset);
-+
-+ reset_control_deassert(adev->clk_reset);
-+ reset_control_deassert(adev->c0_reset);
-+ reset_control_deassert(adev->c1_reset);
-+ reset_control_deassert(adev->c2_reset);
-+
-+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
-+ sizeof(*adev->channels), GFP_KERNEL);
-+
-+ if (!adev->channels) {
-+ ret = -ENOMEM;
-+ goto err_disable_clks;
-+ }
-+
-+ /* allocate and initialize channels */
-+ INIT_LIST_HEAD(&adev->common.channels);
-+
-+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
-+ adm_channel_init(adev, &adev->channels[i], i);
-+
-+ /* reset CRCIs */
-+ for (i = 0; i < 16; i++)
-+ writel(ADM_CRCI_CTL_RST, adev->regs +
-+ ADM_CRCI_CTL(i, adev->ee));
-+
-+ /* configure client interfaces */
-+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
-+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
-+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
-+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
-+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
-+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
-+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
-+ adev->regs + ADM_GP_CTL);
-+
-+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
-+ 0, "adm_dma", adev);
-+ if (ret)
-+ goto err_disable_clks;
-+
-+ platform_set_drvdata(pdev, adev);
-+
-+ adev->common.dev = adev->dev;
-+ adev->common.dev->dma_parms = &adev->dma_parms;
-+
-+ /* set capabilities */
-+ dma_cap_zero(adev->common.cap_mask);
-+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
-+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
-+
-+ /* initialize dmaengine apis */
-+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
-+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
-+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ adev->common.device_free_chan_resources = adm_free_chan;
-+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
-+ adev->common.device_issue_pending = adm_issue_pending;
-+ adev->common.device_tx_status = adm_tx_status;
-+ adev->common.device_terminate_all = adm_terminate_all;
-+ adev->common.device_config = adm_slave_config;
-+
-+ ret = dma_async_device_register(&adev->common);
-+ if (ret) {
-+ dev_err(adev->dev, "failed to register dma async device\n");
-+ goto err_disable_clks;
-+ }
-+
-+ ret = of_dma_controller_register(pdev->dev.of_node,
-+ of_dma_xlate_by_chan_id,
-+ &adev->common);
-+ if (ret)
-+ goto err_unregister_dma;
-+
-+ return 0;
-+
-+err_unregister_dma:
-+ dma_async_device_unregister(&adev->common);
-+err_disable_clks:
-+ clk_disable_unprepare(adev->iface_clk);
-+err_disable_core_clk:
-+ clk_disable_unprepare(adev->core_clk);
-+
-+ return ret;
-+}
-+
-+static int adm_dma_remove(struct platform_device *pdev)
-+{
-+ struct adm_device *adev = platform_get_drvdata(pdev);
-+ struct adm_chan *achan;
-+ u32 i;
-+
-+ of_dma_controller_free(pdev->dev.of_node);
-+ dma_async_device_unregister(&adev->common);
-+
-+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
-+ achan = &adev->channels[i];
-+
-+ /* mask IRQs for this channel/EE pair */
-+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
-+
-+ adm_terminate_all(&adev->channels[i].vc.chan);
-+ }
-+
-+ devm_free_irq(adev->dev, adev->irq, adev);
-+
-+ clk_disable_unprepare(adev->core_clk);
-+ clk_disable_unprepare(adev->iface_clk);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id adm_of_match[] = {
-+ { .compatible = "qcom,adm", },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, adm_of_match);
-+
-+static struct platform_driver adm_dma_driver = {
-+ .probe = adm_dma_probe,
-+ .remove = adm_dma_remove,
-+ .driver = {
-+ .name = "adm-dma-engine",
-+ .of_match_table = adm_of_match,
-+ },
-+};
-+
-+module_platform_driver(adm_dma_driver);
-+
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -65,5 +65,6 @@ obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-
- obj-$(CONFIG_TI_EDMA) += edma.o
- obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
- obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
-+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
-
- obj-y += xilinx/
diff --git a/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch b/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
deleted file mode 100644
index 5383041ffc..0000000000
--- a/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 1fb18acab2d71e7e4efd9c10492edb1baf84dcc0 Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Wed, 20 May 2015 15:41:07 +0530
-Subject: [PATCH] ARM: DT: ipq8064: Add ADM device node
-
-This patch adds support for the ADM DMA on the IPQ8064 SOC
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 4 ++++
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 21 +++++++++++++++++++++
- 2 files changed, 25 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -721,6 +721,26 @@
-
- status = "disabled";
- };
-+
-+ adm_dma: dma@18300000 {
-+ compatible = "qcom,adm";
-+ reg = <0x18300000 0x100000>;
-+ interrupts = <0 170 0>;
-+ #dma-cells = <1>;
-+
-+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-+ clock-names = "core", "iface";
-+
-+ resets = <&gcc ADM0_RESET>,
-+ <&gcc ADM0_PBUS_RESET>,
-+ <&gcc ADM0_C0_RESET>,
-+ <&gcc ADM0_C1_RESET>,
-+ <&gcc ADM0_C2_RESET>;
-+ reset-names = "clk", "pbus", "c0", "c1", "c2";
-+ qcom,ee = <0>;
-+
-+ status = "disabled";
-+ };
- };
-
- sfpb_mutex: sfpb-mutex {
diff --git a/target/linux/ipq806x/patches-4.4/161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch b/target/linux/ipq806x/patches-4.4/161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch
deleted file mode 100644
index 154649dca6..0000000000
--- a/target/linux/ipq806x/patches-4.4/161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,
- 1/5] mtd: nand: Create a BBT flag to access bad block markers in raw
- mode
-From: Archit Taneja <architt@codeaurora.org>
-X-Patchwork-Id: 6927081
-Message-Id: <1438578498-32254-2-git-send-email-architt@codeaurora.org>
-To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
- cernekee@gmail.com, computersforpeace@gmail.com
-Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
- sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
- Archit Taneja <architt@codeaurora.org>
-Date: Mon, 3 Aug 2015 10:38:14 +0530
-
-Some controllers can access the factory bad block marker from OOB only
-when they read it in raw mode. When ECC is enabled, these controllers
-discard reading/writing bad block markers, preventing access to them
-altogether.
-
-The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks.
-This results in the nand driver's ecc->read_oob() op to be called, which
-works with ECC enabled.
-
-Create a new BBT option flag that tells nand_bbt to force the mode to
-MTD_OPS_RAW. This would result in the correct op being called for the
-underlying nand controller driver.
-
-Reviewed-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Archit Taneja <architt@codeaurora.org>
-
----
-drivers/mtd/nand/nand_base.c | 6 +++++-
- drivers/mtd/nand/nand_bbt.c | 6 +++++-
- include/linux/mtd/bbm.h | 7 +++++++
- 3 files changed, 17 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -394,7 +394,11 @@ static int nand_default_block_markbad(st
- } else {
- ops.len = ops.ooblen = 1;
- }
-- ops.mode = MTD_OPS_PLACE_OOB;
-+
-+ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
-+ ops.mode = MTD_OPS_RAW;
-+ else
-+ ops.mode = MTD_OPS_PLACE_OOB;
-
- /* Write to first/last page(s) if necessary */
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
---- a/drivers/mtd/nand/nand_bbt.c
-+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in
- ops.oobbuf = buf;
- ops.ooboffs = 0;
- ops.datbuf = NULL;
-- ops.mode = MTD_OPS_PLACE_OOB;
-+
-+ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
-+ ops.mode = MTD_OPS_RAW;
-+ else
-+ ops.mode = MTD_OPS_PLACE_OOB;
-
- for (j = 0; j < numpages; j++) {
- /*
---- a/include/linux/mtd/bbm.h
-+++ b/include/linux/mtd/bbm.h
-@@ -116,6 +116,12 @@ struct nand_bbt_descr {
- #define NAND_BBT_NO_OOB_BBM 0x00080000
-
- /*
-+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
-+ * be used by controllers which can access BBM only when ECC is disabled, i.e,
-+ * when in RAW access mode
-+ */
-+#define NAND_BBT_ACCESS_BBM_RAW 0x00100000
-+/*
- * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
- * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
- * in nand_chip.bbt_options.
diff --git a/target/linux/ipq806x/patches-4.4/162-mtd-nand-Qualcomm-NAND-controller-driver.patch b/target/linux/ipq806x/patches-4.4/162-mtd-nand-Qualcomm-NAND-controller-driver.patch
deleted file mode 100644
index 84ff6e74e0..0000000000
--- a/target/linux/ipq806x/patches-4.4/162-mtd-nand-Qualcomm-NAND-controller-driver.patch
+++ /dev/null
@@ -1,2024 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,2/5] mtd: nand: Qualcomm NAND controller driver
-From: Archit Taneja <architt@codeaurora.org>
-X-Patchwork-Id: 6927101
-Message-Id: <1438578498-32254-3-git-send-email-architt@codeaurora.org>
-To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
- cernekee@gmail.com, computersforpeace@gmail.com
-Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
- sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
- Archit Taneja <architt@codeaurora.org>
-Date: Mon, 3 Aug 2015 10:38:15 +0530
-
-The Qualcomm NAND controller is found in SoCs like IPQ806x, MSM7xx,
-MDM9x15 series.
-
-It exists as a sub block inside the IPs EBI2 (External Bus Interface 2)
-and QPIC (Qualcomm Parallel Interface Controller). These IPs provide a
-broader interface for external slow peripheral devices such as LCD and
-NAND/NOR flash memory or SRAM like interfaces.
-
-We add support for the NAND controller found within EBI2. For the SoCs
-of our interest, we only use the NAND controller within EBI2. Therefore,
-it's safe for us to assume that the NAND controller is a standalone block
-within the SoC.
-
-The controller supports 512B, 2kB, 4kB and 8kB page 8-bit and 16-bit NAND
-flash devices. It contains a HW ECC block that supports BCH ECC (4, 8 and
-16 bit correction/step) and RS ECC(4 bit correction/step) that covers main
-and spare data. The controller contains an internal 512 byte page buffer
-to which we read/write via DMA. The EBI2 type NAND controller uses ADM DMA
-for register read/write and data transfers. The controller performs page
-reads and writes at a codeword/step level of 512 bytes. It can support up
-to 2 external chips of different configurations.
-
-The driver prepares register read and write configuration descriptors for
-each codeword, followed by data descriptors to read or write data from the
-controller's internal buffer. It uses a single ADM DMA channel that we get
-via dmaengine API. The controller requires 2 ADM CRCIs for command and
-data flow control. These are passed via DT.
-
-The ecc layout used by the controller is syndrome like, but we can't use
-the standard syndrome ecc ops because of several reasons. First, the amount
-of data bytes covered by ecc isn't same in each step. Second, writing to
-free oob space requires us writing to the entire step in which the oob
-lies. This forces us to create our own ecc ops.
-
-One more difference is how the controller accesses the bad block marker.
-The controller ignores reading the marker when ECC is enabled. ECC needs
-to be explicity disabled to read or write to the bad block marker. For
-this reason, we use the newly created flag NAND_BBT_ACCESS_BBM_RAW to
-read the factory provided bad block markers.
-
-v3:
-- Refactor dma functions for maximum reuse
-- Use dma_slave_confing on stack
-- optimize and clean upempty_page_fixup using memchr_inv
-- ensure portability with dma register reads using le32_* funcs
-- use NAND_USE_BOUNCE_BUFFER instead of doing it ourselves
-- fix handling of return values of dmaengine funcs
-- constify wherever possible
-- Remove dependency on ADM DMA in Kconfig
-- Misc fixes and clean ups
-
-v2:
-- Use new BBT flag that allows us to read BBM in raw mode
-- reduce memcpy-s in the driver
-- some refactor and clean ups because of above changes
-
-Reviewed-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Archit Taneja <architt@codeaurora.org>
-
----
-drivers/mtd/nand/Kconfig | 7 +
- drivers/mtd/nand/Makefile | 1 +
- drivers/mtd/nand/qcom_nandc.c | 1913 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 1921 insertions(+)
- create mode 100644 drivers/mtd/nand/qcom_nandc.c
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -546,4 +546,11 @@ config MTD_NAND_HISI504
- help
- Enables support for NAND controller on Hisilicon SoC Hip04.
-
-+config MTD_NAND_QCOM
-+ tristate "Support for NAND on QCOM SoCs"
-+ depends on ARCH_QCOM
-+ help
-+ Enables support for NAND flash chips on SoCs containing the EBI2 NAND
-+ controller. This controller is found on IPQ806x SoC.
-+
- endif # MTD_NAND
---- /dev/null
-+++ b/drivers/mtd/nand/qcom_nandc.c
-@@ -0,0 +1,1918 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/slab.h>
-+#include <linux/bitops.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmaengine.h>
-+#include <linux/module.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/of_mtd.h>
-+#include <linux/delay.h>
-+
-+/* NANDc reg offsets */
-+#define NAND_FLASH_CMD 0x00
-+#define NAND_ADDR0 0x04
-+#define NAND_ADDR1 0x08
-+#define NAND_FLASH_CHIP_SELECT 0x0c
-+#define NAND_EXEC_CMD 0x10
-+#define NAND_FLASH_STATUS 0x14
-+#define NAND_BUFFER_STATUS 0x18
-+#define NAND_DEV0_CFG0 0x20
-+#define NAND_DEV0_CFG1 0x24
-+#define NAND_DEV0_ECC_CFG 0x28
-+#define NAND_DEV1_ECC_CFG 0x2c
-+#define NAND_DEV1_CFG0 0x30
-+#define NAND_DEV1_CFG1 0x34
-+#define NAND_READ_ID 0x40
-+#define NAND_READ_STATUS 0x44
-+#define NAND_DEV_CMD0 0xa0
-+#define NAND_DEV_CMD1 0xa4
-+#define NAND_DEV_CMD2 0xa8
-+#define NAND_DEV_CMD_VLD 0xac
-+#define SFLASHC_BURST_CFG 0xe0
-+#define NAND_ERASED_CW_DETECT_CFG 0xe8
-+#define NAND_ERASED_CW_DETECT_STATUS 0xec
-+#define NAND_EBI2_ECC_BUF_CFG 0xf0
-+#define FLASH_BUF_ACC 0x100
-+
-+#define NAND_CTRL 0xf00
-+#define NAND_VERSION 0xf08
-+#define NAND_READ_LOCATION_0 0xf20
-+#define NAND_READ_LOCATION_1 0xf24
-+
-+/* dummy register offsets, used by write_reg_dma */
-+#define NAND_DEV_CMD1_RESTORE 0xdead
-+#define NAND_DEV_CMD_VLD_RESTORE 0xbeef
-+
-+/* NAND_FLASH_CMD bits */
-+#define PAGE_ACC BIT(4)
-+#define LAST_PAGE BIT(5)
-+
-+/* NAND_FLASH_CHIP_SELECT bits */
-+#define NAND_DEV_SEL 0
-+#define DM_EN BIT(2)
-+
-+/* NAND_FLASH_STATUS bits */
-+#define FS_OP_ERR BIT(4)
-+#define FS_READY_BSY_N BIT(5)
-+#define FS_MPU_ERR BIT(8)
-+#define FS_DEVICE_STS_ERR BIT(16)
-+#define FS_DEVICE_WP BIT(23)
-+
-+/* NAND_BUFFER_STATUS bits */
-+#define BS_UNCORRECTABLE_BIT BIT(8)
-+#define BS_CORRECTABLE_ERR_MSK 0x1f
-+
-+/* NAND_DEVn_CFG0 bits */
-+#define DISABLE_STATUS_AFTER_WRITE 4
-+#define CW_PER_PAGE 6
-+#define UD_SIZE_BYTES 9
-+#define ECC_PARITY_SIZE_BYTES_RS 19
-+#define SPARE_SIZE_BYTES 23
-+#define NUM_ADDR_CYCLES 27
-+#define STATUS_BFR_READ 30
-+#define SET_RD_MODE_AFTER_STATUS 31
-+
-+/* NAND_DEVn_CFG0 bits */
-+#define DEV0_CFG1_ECC_DISABLE 0
-+#define WIDE_FLASH 1
-+#define NAND_RECOVERY_CYCLES 2
-+#define CS_ACTIVE_BSY 5
-+#define BAD_BLOCK_BYTE_NUM 6
-+#define BAD_BLOCK_IN_SPARE_AREA 16
-+#define WR_RD_BSY_GAP 17
-+#define ENABLE_BCH_ECC 27
-+
-+/* NAND_DEV0_ECC_CFG bits */
-+#define ECC_CFG_ECC_DISABLE 0
-+#define ECC_SW_RESET 1
-+#define ECC_MODE 4
-+#define ECC_PARITY_SIZE_BYTES_BCH 8
-+#define ECC_NUM_DATA_BYTES 16
-+#define ECC_FORCE_CLK_OPEN 30
-+
-+/* NAND_DEV_CMD1 bits */
-+#define READ_ADDR 0
-+
-+/* NAND_DEV_CMD_VLD bits */
-+#define READ_START_VLD 0
-+
-+/* NAND_EBI2_ECC_BUF_CFG bits */
-+#define NUM_STEPS 0
-+
-+/* NAND_ERASED_CW_DETECT_CFG bits */
-+#define ERASED_CW_ECC_MASK 1
-+#define AUTO_DETECT_RES 0
-+#define MASK_ECC (1 << ERASED_CW_ECC_MASK)
-+#define RESET_ERASED_DET (1 << AUTO_DETECT_RES)
-+#define ACTIVE_ERASED_DET (0 << AUTO_DETECT_RES)
-+#define CLR_ERASED_PAGE_DET (RESET_ERASED_DET | MASK_ECC)
-+#define SET_ERASED_PAGE_DET (ACTIVE_ERASED_DET | MASK_ECC)
-+
-+/* NAND_ERASED_CW_DETECT_STATUS bits */
-+#define PAGE_ALL_ERASED BIT(7)
-+#define CODEWORD_ALL_ERASED BIT(6)
-+#define PAGE_ERASED BIT(5)
-+#define CODEWORD_ERASED BIT(4)
-+#define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED)
-+#define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED)
-+
-+/* Version Mask */
-+#define NAND_VERSION_MAJOR_MASK 0xf0000000
-+#define NAND_VERSION_MAJOR_SHIFT 28
-+#define NAND_VERSION_MINOR_MASK 0x0fff0000
-+#define NAND_VERSION_MINOR_SHIFT 16
-+
-+/* NAND OP_CMDs */
-+#define PAGE_READ 0x2
-+#define PAGE_READ_WITH_ECC 0x3
-+#define PAGE_READ_WITH_ECC_SPARE 0x4
-+#define PROGRAM_PAGE 0x6
-+#define PAGE_PROGRAM_WITH_ECC 0x7
-+#define PROGRAM_PAGE_SPARE 0x9
-+#define BLOCK_ERASE 0xa
-+#define FETCH_ID 0xb
-+#define RESET_DEVICE 0xd
-+
-+/*
-+ * the NAND controller performs reads/writes with ECC in 516 byte chunks.
-+ * the driver calls the chunks 'step' or 'codeword' interchangeably
-+ */
-+#define NANDC_STEP_SIZE 512
-+
-+/*
-+ * the largest page size we support is 8K, this will have 16 steps/codewords
-+ * of 512 bytes each
-+ */
-+#define MAX_NUM_STEPS (SZ_8K / NANDC_STEP_SIZE)
-+
-+/* we read at most 3 registers per codeword scan */
-+#define MAX_REG_RD (3 * MAX_NUM_STEPS)
-+
-+/* ECC modes */
-+#define ECC_NONE BIT(0)
-+#define ECC_RS_4BIT BIT(1)
-+#define ECC_BCH_4BIT BIT(2)
-+#define ECC_BCH_8BIT BIT(3)
-+
-+struct desc_info {
-+ struct list_head list;
-+
-+ enum dma_transfer_direction dir;
-+ struct scatterlist sgl;
-+ struct dma_async_tx_descriptor *dma_desc;
-+};
-+
-+/*
-+ * holds the current register values that we want to write. acts as a contiguous
-+ * chunk of memory which we use to write the controller registers through DMA.
-+ */
-+struct nandc_regs {
-+ u32 cmd;
-+ u32 addr0;
-+ u32 addr1;
-+ u32 chip_sel;
-+ u32 exec;
-+
-+ u32 cfg0;
-+ u32 cfg1;
-+ u32 ecc_bch_cfg;
-+
-+ u32 clrflashstatus;
-+ u32 clrreadstatus;
-+
-+ u32 cmd1;
-+ u32 vld;
-+
-+ u32 orig_cmd1;
-+ u32 orig_vld;
-+
-+ u32 ecc_buf_cfg;
-+};
-+
-+/*
-+ * @cmd_crci: ADM DMA CRCI for command flow control
-+ * @data_crci: ADM DMA CRCI for data flow control
-+ * @list: DMA descriptor list (list of desc_infos)
-+ * @dma_done: completion param to denote end of last
-+ * descriptor in the list
-+ * @data_buffer: our local DMA buffer for page read/writes,
-+ * used when we can't use the buffer provided
-+ * by upper layers directly
-+ * @buf_size/count/start: markers for chip->read_buf/write_buf functions
-+ * @reg_read_buf: buffer for reading register data via DMA
-+ * @reg_read_pos: marker for data read in reg_read_buf
-+ * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
-+ * ecc/non-ecc mode for the current nand flash
-+ * device
-+ * @regs: a contiguous chunk of memory for DMA register
-+ * writes
-+ * @ecc_strength: 4 bit or 8 bit ecc, received via DT
-+ * @bus_width: 8 bit or 16 bit NAND bus width, received via DT
-+ * @ecc_modes: supported ECC modes by the current controller,
-+ * initialized via DT match data
-+ * @cw_size: the number of bytes in a single step/codeword
-+ * of a page, consisting of all data, ecc, spare
-+ * and reserved bytes
-+ * @cw_data: the number of bytes within a codeword protected
-+ * by ECC
-+ * @bch_enabled: flag to tell whether BCH or RS ECC mode is used
-+ * @status: value to be returned if NAND_CMD_STATUS command
-+ * is executed
-+ */
-+struct qcom_nandc_data {
-+ struct platform_device *pdev;
-+ struct device *dev;
-+
-+ void __iomem *base;
-+ struct resource *res;
-+
-+ struct clk *core_clk;
-+ struct clk *aon_clk;
-+
-+ /* DMA stuff */
-+ struct dma_chan *chan;
-+ struct dma_slave_config slave_conf;
-+ unsigned int cmd_crci;
-+ unsigned int data_crci;
-+ struct list_head list;
-+ struct completion dma_done;
-+
-+ /* MTD stuff */
-+ struct nand_chip chip;
-+ struct mtd_info mtd;
-+
-+ /* local data buffer and markers */
-+ u8 *data_buffer;
-+ int buf_size;
-+ int buf_count;
-+ int buf_start;
-+
-+ /* local buffer to read back registers */
-+ u32 *reg_read_buf;
-+ int reg_read_pos;
-+
-+ /* required configs */
-+ u32 cfg0, cfg1;
-+ u32 cfg0_raw, cfg1_raw;
-+ u32 ecc_buf_cfg;
-+ u32 ecc_bch_cfg;
-+ u32 clrflashstatus;
-+ u32 clrreadstatus;
-+ u32 sflashc_burst_cfg;
-+ u32 cmd1, vld;
-+
-+ /* register state */
-+ struct nandc_regs *regs;
-+
-+ /* things we get from DT */
-+ int ecc_strength;
-+ int bus_width;
-+
-+ u32 ecc_modes;
-+
-+ /* misc params */
-+ int cw_size;
-+ int cw_data;
-+ bool use_ecc;
-+ bool bch_enabled;
-+ u8 status;
-+ int last_command;
-+};
-+
-+static inline u32 nandc_read(struct qcom_nandc_data *this, int offset)
-+{
-+ return ioread32(this->base + offset);
-+}
-+
-+static inline void nandc_write(struct qcom_nandc_data *this, int offset,
-+ u32 val)
-+{
-+ iowrite32(val, this->base + offset);
-+}
-+
-+/* helper to configure address register values */
-+static void set_address(struct qcom_nandc_data *this, u16 column, int page)
-+{
-+ struct nand_chip *chip = &this->chip;
-+ struct nandc_regs *regs = this->regs;
-+
-+ if (chip->options & NAND_BUSWIDTH_16)
-+ column >>= 1;
-+
-+ regs->addr0 = page << 16 | column;
-+ regs->addr1 = page >> 16 & 0xff;
-+}
-+
-+/*
-+ * update_rw_regs: set up read/write register values, these will be
-+ * written to the NAND controller registers via DMA
-+ *
-+ * @num_cw: number of steps for the read/write operation
-+ * @read: read or write operation
-+ */
-+static void update_rw_regs(struct qcom_nandc_data *this, int num_cw, bool read)
-+{
-+ struct nandc_regs *regs = this->regs;
-+
-+ if (read) {
-+ if (this->use_ecc)
-+ regs->cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE;
-+ else
-+ regs->cmd = PAGE_READ | PAGE_ACC | LAST_PAGE;
-+ } else {
-+ regs->cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE;
-+ }
-+
-+ if (this->use_ecc) {
-+ regs->cfg0 = (this->cfg0 & ~(7U << CW_PER_PAGE)) |
-+ (num_cw - 1) << CW_PER_PAGE;
-+
-+ regs->cfg1 = this->cfg1;
-+ regs->ecc_bch_cfg = this->ecc_bch_cfg;
-+ } else {
-+ regs->cfg0 = (this->cfg0_raw & ~(7U << CW_PER_PAGE)) |
-+ (num_cw - 1) << CW_PER_PAGE;
-+
-+ regs->cfg1 = this->cfg1_raw;
-+ regs->ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
-+ }
-+
-+ regs->ecc_buf_cfg = this->ecc_buf_cfg;
-+ regs->clrflashstatus = this->clrflashstatus;
-+ regs->clrreadstatus = this->clrreadstatus;
-+ regs->exec = 1;
-+}
-+
-+static int prep_dma_desc(struct qcom_nandc_data *this, bool read, int reg_off,
-+ const void *vaddr, int size, bool flow_control)
-+{
-+ struct desc_info *desc;
-+ struct dma_async_tx_descriptor *dma_desc;
-+ struct scatterlist *sgl;
-+ struct dma_slave_config slave_conf;
-+ int r;
-+
-+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
-+ if (!desc)
-+ return -ENOMEM;
-+
-+ list_add_tail(&desc->list, &this->list);
-+
-+ sgl = &desc->sgl;
-+
-+ sg_init_one(sgl, vaddr, size);
-+
-+ desc->dir = read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
-+
-+ r = dma_map_sg(this->dev, sgl, 1, desc->dir);
-+ if (r == 0) {
-+ r = -ENOMEM;
-+ goto err;
-+ }
-+
-+ memset(&slave_conf, 0x00, sizeof(slave_conf));
-+
-+ slave_conf.device_fc = flow_control;
-+ if (read) {
-+ slave_conf.src_maxburst = 16;
-+ slave_conf.src_addr = this->res->start + reg_off;
-+ slave_conf.slave_id = this->data_crci;
-+ } else {
-+ slave_conf.dst_maxburst = 16;
-+ slave_conf.dst_addr = this->res->start + reg_off;
-+ slave_conf.slave_id = this->cmd_crci;
-+ }
-+
-+ r = dmaengine_slave_config(this->chan, &slave_conf);
-+ if (r) {
-+ dev_err(this->dev, "failed to configure dma channel\n");
-+ goto err;
-+ }
-+
-+ dma_desc = dmaengine_prep_slave_sg(this->chan, sgl, 1, desc->dir, 0);
-+ if (!dma_desc) {
-+ dev_err(this->dev, "failed to prepare desc\n");
-+ r = -EINVAL;
-+ goto err;
-+ }
-+
-+ desc->dma_desc = dma_desc;
-+
-+ return 0;
-+err:
-+ kfree(desc);
-+
-+ return r;
-+}
-+
-+/*
-+ * read_reg_dma: prepares a descriptor to read a given number of
-+ * contiguous registers to the reg_read_buf pointer
-+ *
-+ * @first: offset of the first register in the contiguous block
-+ * @num_regs: number of registers to read
-+ */
-+static int read_reg_dma(struct qcom_nandc_data *this, int first, int num_regs)
-+{
-+ bool flow_control = false;
-+ void *vaddr;
-+ int size;
-+
-+ if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
-+ flow_control = true;
-+
-+ size = num_regs * sizeof(u32);
-+ vaddr = this->reg_read_buf + this->reg_read_pos;
-+ this->reg_read_pos += num_regs;
-+
-+ return prep_dma_desc(this, true, first, vaddr, size, flow_control);
-+}
-+
-+/*
-+ * write_reg_dma: prepares a descriptor to write a given number of
-+ * contiguous registers
-+ *
-+ * @first: offset of the first register in the contiguous block
-+ * @num_regs: number of registers to write
-+ */
-+static int write_reg_dma(struct qcom_nandc_data *this, int first, int num_regs)
-+{
-+ bool flow_control = false;
-+ struct nandc_regs *regs = this->regs;
-+ void *vaddr;
-+ int size;
-+
-+ switch (first) {
-+ case NAND_FLASH_CMD:
-+ vaddr = &regs->cmd;
-+ flow_control = true;
-+ break;
-+ case NAND_EXEC_CMD:
-+ vaddr = &regs->exec;
-+ break;
-+ case NAND_FLASH_STATUS:
-+ vaddr = &regs->clrflashstatus;
-+ break;
-+ case NAND_DEV0_CFG0:
-+ vaddr = &regs->cfg0;
-+ break;
-+ case NAND_READ_STATUS:
-+ vaddr = &regs->clrreadstatus;
-+ break;
-+ case NAND_DEV_CMD1:
-+ vaddr = &regs->cmd1;
-+ break;
-+ case NAND_DEV_CMD1_RESTORE:
-+ first = NAND_DEV_CMD1;
-+ vaddr = &regs->orig_cmd1;
-+ break;
-+ case NAND_DEV_CMD_VLD:
-+ vaddr = &regs->vld;
-+ break;
-+ case NAND_DEV_CMD_VLD_RESTORE:
-+ first = NAND_DEV_CMD_VLD;
-+ vaddr = &regs->orig_vld;
-+ break;
-+ case NAND_EBI2_ECC_BUF_CFG:
-+ vaddr = &regs->ecc_buf_cfg;
-+ break;
-+ default:
-+ dev_err(this->dev, "invalid starting register\n");
-+ return -EINVAL;
-+ }
-+
-+ size = num_regs * sizeof(u32);
-+
-+ return prep_dma_desc(this, false, first, vaddr, size, flow_control);
-+}
-+
-+/*
-+ * read_data_dma: prepares a DMA descriptor to transfer data from the
-+ * controller's internal buffer to the buffer 'vaddr'
-+ *
-+ * @reg_off: offset within the controller's data buffer
-+ * @vaddr: virtual address of the buffer we want to write to
-+ * @size: DMA transaction size in bytes
-+ */
-+static int read_data_dma(struct qcom_nandc_data *this, int reg_off,
-+ const u8 *vaddr, int size)
-+{
-+ return prep_dma_desc(this, true, reg_off, vaddr, size, false);
-+}
-+
-+/*
-+ * write_data_dma: prepares a DMA descriptor to transfer data from
-+ * 'vaddr' to the controller's internal buffer
-+ *
-+ * @reg_off: offset within the controller's data buffer
-+ * @vaddr: virtual address of the buffer we want to read from
-+ * @size: DMA transaction size in bytes
-+ */
-+static int write_data_dma(struct qcom_nandc_data *this, int reg_off,
-+ const u8 *vaddr, int size)
-+{
-+ return prep_dma_desc(this, false, reg_off, vaddr, size, false);
-+}
-+
-+/*
-+ * helper to prepare dma descriptors to configure registers needed for reading a
-+ * codeword/step in a page
-+ */
-+static void config_cw_read(struct qcom_nandc_data *this)
-+{
-+ write_reg_dma(this, NAND_FLASH_CMD, 3);
-+ write_reg_dma(this, NAND_DEV0_CFG0, 3);
-+ write_reg_dma(this, NAND_EBI2_ECC_BUF_CFG, 1);
-+
-+ write_reg_dma(this, NAND_EXEC_CMD, 1);
-+
-+ read_reg_dma(this, NAND_FLASH_STATUS, 2);
-+ read_reg_dma(this, NAND_ERASED_CW_DETECT_STATUS, 1);
-+}
-+
-+/*
-+ * helpers to prepare dma descriptors used to configure registers needed for
-+ * writing a codeword/step in a page
-+ */
-+static void config_cw_write_pre(struct qcom_nandc_data *this)
-+{
-+ write_reg_dma(this, NAND_FLASH_CMD, 3);
-+ write_reg_dma(this, NAND_DEV0_CFG0, 3);
-+ write_reg_dma(this, NAND_EBI2_ECC_BUF_CFG, 1);
-+}
-+
-+static void config_cw_write_post(struct qcom_nandc_data *this)
-+{
-+ write_reg_dma(this, NAND_EXEC_CMD, 1);
-+
-+ read_reg_dma(this, NAND_FLASH_STATUS, 1);
-+
-+ write_reg_dma(this, NAND_FLASH_STATUS, 1);
-+ write_reg_dma(this, NAND_READ_STATUS, 1);
-+}
-+
-+/*
-+ * the following functions are used within chip->cmdfunc() to perform different
-+ * NAND_CMD_* commands
-+ */
-+
-+/* sets up descriptors for NAND_CMD_PARAM */
-+static int nandc_param(struct qcom_nandc_data *this)
-+{
-+ struct nandc_regs *regs = this->regs;
-+
-+ /*
-+ * NAND_CMD_PARAM is called before we know much about the FLASH chip
-+ * in use. we configure the controller to perform a raw read of 512
-+ * bytes to read onfi params
-+ */
-+ regs->cmd = PAGE_READ | PAGE_ACC | LAST_PAGE;
-+ regs->addr0 = 0;
-+ regs->addr1 = 0;
-+ regs->cfg0 = 0 << CW_PER_PAGE
-+ | 512 << UD_SIZE_BYTES
-+ | 5 << NUM_ADDR_CYCLES
-+ | 0 << SPARE_SIZE_BYTES;
-+
-+ regs->cfg1 = 7 << NAND_RECOVERY_CYCLES
-+ | 0 << CS_ACTIVE_BSY
-+ | 17 << BAD_BLOCK_BYTE_NUM
-+ | 1 << BAD_BLOCK_IN_SPARE_AREA
-+ | 2 << WR_RD_BSY_GAP
-+ | 0 << WIDE_FLASH
-+ | 1 << DEV0_CFG1_ECC_DISABLE;
-+
-+ regs->ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
-+
-+ /* configure CMD1 and VLD for ONFI param probing */
-+ regs->vld = (this->vld & ~(1 << READ_START_VLD))
-+ | 0 << READ_START_VLD;
-+
-+ regs->cmd1 = (this->cmd1 & ~(0xFF << READ_ADDR))
-+ | NAND_CMD_PARAM << READ_ADDR;
-+
-+ regs->exec = 1;
-+
-+ regs->orig_cmd1 = this->cmd1;
-+ regs->orig_vld = this->vld;
-+
-+ write_reg_dma(this, NAND_DEV_CMD_VLD, 1);
-+ write_reg_dma(this, NAND_DEV_CMD1, 1);
-+
-+ this->buf_count = 512;
-+ memset(this->data_buffer, 0xff, this->buf_count);
-+
-+ config_cw_read(this);
-+
-+ read_data_dma(this, FLASH_BUF_ACC, this->data_buffer, this->buf_count);
-+
-+ /* restore CMD1 and VLD regs */
-+ write_reg_dma(this, NAND_DEV_CMD1_RESTORE, 1);
-+ write_reg_dma(this, NAND_DEV_CMD_VLD_RESTORE, 1);
-+
-+ return 0;
-+}
-+
-+/* sets up descriptors for NAND_CMD_ERASE1 */
-+static int erase_block(struct qcom_nandc_data *this, int page_addr)
-+{
-+ struct nandc_regs *regs = this->regs;
-+
-+ regs->cmd = BLOCK_ERASE | PAGE_ACC | LAST_PAGE;
-+ regs->addr0 = page_addr;
-+ regs->addr1 = 0;
-+ regs->cfg0 = this->cfg0_raw & ~(7 << CW_PER_PAGE);
-+ regs->cfg1 = this->cfg1_raw;
-+ regs->exec = 1;
-+ regs->clrflashstatus = this->clrflashstatus;
-+ regs->clrreadstatus = this->clrreadstatus;
-+
-+ write_reg_dma(this, NAND_FLASH_CMD, 3);
-+ write_reg_dma(this, NAND_DEV0_CFG0, 2);
-+ write_reg_dma(this, NAND_EXEC_CMD, 1);
-+
-+ read_reg_dma(this, NAND_FLASH_STATUS, 1);
-+
-+ write_reg_dma(this, NAND_FLASH_STATUS, 1);
-+ write_reg_dma(this, NAND_READ_STATUS, 1);
-+
-+ return 0;
-+}
-+
-+/* sets up descriptors for NAND_CMD_READID */
-+static int read_id(struct qcom_nandc_data *this, int column)
-+{
-+ struct nandc_regs *regs = this->regs;
-+
-+ if (column == -1)
-+ return 0;
-+
-+ regs->cmd = FETCH_ID;
-+ regs->addr0 = column;
-+ regs->addr1 = 0;
-+ regs->chip_sel = DM_EN;
-+ regs->exec = 1;
-+
-+ write_reg_dma(this, NAND_FLASH_CMD, 4);
-+ write_reg_dma(this, NAND_EXEC_CMD, 1);
-+
-+ read_reg_dma(this, NAND_READ_ID, 1);
-+
-+ return 0;
-+}
-+
-+/* sets up descriptors for NAND_CMD_RESET */
-+static int reset(struct qcom_nandc_data *this)
-+{
-+ struct nandc_regs *regs = this->regs;
-+
-+ regs->cmd = RESET_DEVICE;
-+ regs->exec = 1;
-+
-+ write_reg_dma(this, NAND_FLASH_CMD, 1);
-+ write_reg_dma(this, NAND_EXEC_CMD, 1);
-+
-+ read_reg_dma(this, NAND_FLASH_STATUS, 1);
-+
-+ return 0;
-+}
-+
-+/* helpers to submit/free our list of dma descriptors */
-+static void dma_callback(void *param)
-+{
-+ struct qcom_nandc_data *this = param;
-+ struct completion *c = &this->dma_done;
-+
-+ complete(c);
-+}
-+
-+static int submit_descs(struct qcom_nandc_data *this)
-+{
-+ struct completion *c = &this->dma_done;
-+ struct desc_info *desc;
-+ int r;
-+
-+ init_completion(c);
-+
-+ list_for_each_entry(desc, &this->list, list) {
-+ /*
-+ * we add a callback to the last descriptor in our list to
-+ * notify completion of command
-+ */
-+ if (list_is_last(&desc->list, &this->list)) {
-+ desc->dma_desc->callback = dma_callback;
-+ desc->dma_desc->callback_param = this;
-+ }
-+
-+ dmaengine_submit(desc->dma_desc);
-+ }
-+
-+ dma_async_issue_pending(this->chan);
-+
-+ r = wait_for_completion_timeout(c, msecs_to_jiffies(500));
-+ if (!r)
-+ return -ETIMEDOUT;
-+
-+ return 0;
-+}
-+
-+static void free_descs(struct qcom_nandc_data *this)
-+{
-+ struct desc_info *desc, *n;
-+
-+ list_for_each_entry_safe(desc, n, &this->list, list) {
-+ list_del(&desc->list);
-+ dma_unmap_sg(this->dev, &desc->sgl, 1, desc->dir);
-+ kfree(desc);
-+ }
-+}
-+
-+/* reset the register read buffer for next NAND operation */
-+static void clear_read_regs(struct qcom_nandc_data *this)
-+{
-+ this->reg_read_pos = 0;
-+ memset(this->reg_read_buf, 0, MAX_REG_RD * sizeof(*this->reg_read_buf));
-+}
-+
-+static void pre_command(struct qcom_nandc_data *this, int command)
-+{
-+ this->buf_count = 0;
-+ this->buf_start = 0;
-+ this->use_ecc = false;
-+ this->last_command = command;
-+
-+ clear_read_regs(this);
-+}
-+
-+/*
-+ * this is called after NAND_CMD_PAGEPROG and NAND_CMD_ERASE1 to set our
-+ * privately maintained status byte, this status byte can be read after
-+ * NAND_CMD_STATUS is called
-+ */
-+static void parse_erase_write_errors(struct qcom_nandc_data *this, int command)
-+{
-+ struct nand_chip *chip = &this->chip;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ int num_cw;
-+ int i;
-+
-+ num_cw = command == NAND_CMD_PAGEPROG ? ecc->steps : 1;
-+
-+ for (i = 0; i < num_cw; i++) {
-+ __le32 flash_status = le32_to_cpu(this->reg_read_buf[i]);
-+
-+ if (flash_status & FS_MPU_ERR)
-+ this->status &= ~NAND_STATUS_WP;
-+
-+ if (flash_status & FS_OP_ERR || (i == (num_cw - 1) &&
-+ (flash_status & FS_DEVICE_STS_ERR)))
-+ this->status |= NAND_STATUS_FAIL;
-+ }
-+}
-+
-+static void post_command(struct qcom_nandc_data *this, int command)
-+{
-+ switch (command) {
-+ case NAND_CMD_READID:
-+ memcpy(this->data_buffer, this->reg_read_buf, this->buf_count);
-+ break;
-+ case NAND_CMD_PAGEPROG:
-+ case NAND_CMD_ERASE1:
-+ parse_erase_write_errors(this, command);
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+/*
-+ * Implements chip->cmdfunc. It's only used for a limited set of commands.
-+ * The rest of the commands wouldn't be called by upper layers. For example,
-+ * NAND_CMD_READOOB would never be called because we have our own versions
-+ * of read_oob ops for nand_ecc_ctrl.
-+ */
-+static void qcom_nandc_command(struct mtd_info *mtd, unsigned int command,
-+ int column, int page_addr)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ struct qcom_nandc_data *this = chip->priv;
-+ bool wait = false;
-+ int r = 0;
-+
-+ pre_command(this, command);
-+
-+ switch (command) {
-+ case NAND_CMD_RESET:
-+ r = reset(this);
-+ wait = true;
-+ break;
-+
-+ case NAND_CMD_READID:
-+ this->buf_count = 4;
-+ r = read_id(this, column);
-+ wait = true;
-+ break;
-+
-+ case NAND_CMD_PARAM:
-+ r = nandc_param(this);
-+ wait = true;
-+ break;
-+
-+ case NAND_CMD_ERASE1:
-+ r = erase_block(this, page_addr);
-+ wait = true;
-+ break;
-+
-+ case NAND_CMD_READ0:
-+ /* we read the entire page for now */
-+ WARN_ON(column != 0);
-+
-+ this->use_ecc = true;
-+ set_address(this, 0, page_addr);
-+ update_rw_regs(this, ecc->steps, true);
-+ break;
-+
-+ case NAND_CMD_SEQIN:
-+ WARN_ON(column != 0);
-+ set_address(this, 0, page_addr);
-+ break;
-+
-+ case NAND_CMD_PAGEPROG:
-+ case NAND_CMD_STATUS:
-+ case NAND_CMD_NONE:
-+ default:
-+ break;
-+ }
-+
-+ if (r) {
-+ dev_err(this->dev, "failure executing command %d\n",
-+ command);
-+ free_descs(this);
-+ return;
-+ }
-+
-+ if (wait) {
-+ r = submit_descs(this);
-+ if (r)
-+ dev_err(this->dev,
-+ "failure submitting descs for command %d\n",
-+ command);
-+ }
-+
-+ free_descs(this);
-+
-+ post_command(this, command);
-+}
-+
-+/*
-+ * when using RS ECC, the NAND controller flags an error when reading an
-+ * erased page. however, there are special characters at certain offsets when
-+ * we read the erased page. we check here if the page is really empty. if so,
-+ * we replace the magic characters with 0xffs
-+ */
-+static bool empty_page_fixup(struct qcom_nandc_data *this, u8 *data_buf)
-+{
-+ struct mtd_info *mtd = &this->mtd;
-+ struct nand_chip *chip = &this->chip;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ int cwperpage = ecc->steps;
-+ u8 orig1[MAX_NUM_STEPS], orig2[MAX_NUM_STEPS];
-+ int i, j;
-+
-+ /* if BCH is enabled, HW will take care of detecting erased pages */
-+ if (this->bch_enabled || !this->use_ecc)
-+ return false;
-+
-+ for (i = 0; i < cwperpage; i++) {
-+ u8 *empty1, *empty2;
-+ __le32 flash_status = le32_to_cpu(this->reg_read_buf[3 * i]);
-+
-+ /*
-+ * an erased page flags an error in NAND_FLASH_STATUS, check if
-+ * the page is erased by looking for 0x54s at offsets 3 and 175
-+ * from the beginning of each codeword
-+ */
-+ if (!(flash_status & FS_OP_ERR))
-+ break;
-+
-+ empty1 = &data_buf[3 + i * this->cw_data];
-+ empty2 = &data_buf[175 + i * this->cw_data];
-+
-+ /*
-+ * if the error wasn't because of an erased page, bail out and
-+ * and let someone else do the error checking
-+ */
-+ if ((*empty1 == 0x54 && *empty2 == 0xff) ||
-+ (*empty1 == 0xff && *empty2 == 0x54)) {
-+ orig1[i] = *empty1;
-+ orig2[i] = *empty2;
-+
-+ *empty1 = 0xff;
-+ *empty2 = 0xff;
-+ } else {
-+ break;
-+ }
-+ }
-+
-+ if (i < cwperpage || memchr_inv(data_buf, 0xff, mtd->writesize))
-+ goto not_empty;
-+
-+ /*
-+ * tell the caller that the page was empty and is fixed up, so that
-+ * parse_read_errors() doesn't think it's an error
-+ */
-+ return true;
-+
-+not_empty:
-+ /* restore original values if not empty*/
-+ for (j = 0; j < i; j++) {
-+ data_buf[3 + j * this->cw_data] = orig1[j];
-+ data_buf[175 + j * this->cw_data] = orig2[j];
-+ }
-+
-+ return false;
-+}
-+
-+struct read_stats {
-+ __le32 flash;
-+ __le32 buffer;
-+ __le32 erased_cw;
-+};
-+
-+/*
-+ * reads back status registers set by the controller to notify page read
-+ * errors. this is equivalent to what 'ecc->correct()' would do.
-+ */
-+static int parse_read_errors(struct qcom_nandc_data *this, bool erased_page)
-+{
-+ struct mtd_info *mtd = &this->mtd;
-+ struct nand_chip *chip = &this->chip;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ int cwperpage = ecc->steps;
-+ unsigned int max_bitflips = 0;
-+ int i;
-+
-+ for (i = 0; i < cwperpage; i++) {
-+ int stat;
-+ struct read_stats *buf;
-+
-+ buf = (struct read_stats *) (this->reg_read_buf + 3 * i);
-+
-+ buf->flash = le32_to_cpu(buf->flash);
-+ buf->buffer = le32_to_cpu(buf->buffer);
-+ buf->erased_cw = le32_to_cpu(buf->erased_cw);
-+
-+ if (buf->flash & (FS_OP_ERR | FS_MPU_ERR)) {
-+
-+ /* ignore erased codeword errors */
-+ if (this->bch_enabled) {
-+ if ((buf->erased_cw & ERASED_CW) == ERASED_CW)
-+ continue;
-+ } else if (erased_page) {
-+ continue;
-+ }
-+
-+ if (buf->buffer & BS_UNCORRECTABLE_BIT) {
-+ mtd->ecc_stats.failed++;
-+ continue;
-+ }
-+ }
-+
-+ stat = buf->buffer & BS_CORRECTABLE_ERR_MSK;
-+ mtd->ecc_stats.corrected += stat;
-+
-+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
-+ }
-+
-+ return max_bitflips;
-+}
-+
-+/*
-+ * helper to perform the actual page read operation, used by ecc->read_page()
-+ * and ecc->read_oob()
-+ */
-+static int read_page_low(struct qcom_nandc_data *this, u8 *data_buf,
-+ u8 *oob_buf)
-+{
-+ struct nand_chip *chip = &this->chip;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ int i, r;
-+
-+ /* queue cmd descs for each codeword */
-+ for (i = 0; i < ecc->steps; i++) {
-+ int data_size, oob_size;
-+
-+ if (i == (ecc->steps - 1)) {
-+ data_size = ecc->size - ((ecc->steps - 1) << 2);
-+ oob_size = (ecc->steps << 2) + ecc->bytes;
-+ } else {
-+ data_size = this->cw_data;
-+ oob_size = ecc->bytes;
-+ }
-+
-+ config_cw_read(this);
-+
-+ if (data_buf)
-+ read_data_dma(this, FLASH_BUF_ACC, data_buf, data_size);
-+
-+ if (oob_buf)
-+ read_data_dma(this, FLASH_BUF_ACC + data_size, oob_buf,
-+ oob_size);
-+
-+ if (data_buf)
-+ data_buf += data_size;
-+ if (oob_buf)
-+ oob_buf += oob_size;
-+ }
-+
-+ r = submit_descs(this);
-+ if (r)
-+ dev_err(this->dev, "failure to read page/oob\n");
-+
-+ free_descs(this);
-+
-+ return r;
-+}
-+
-+/*
-+ * a helper that copies the last step/codeword of a page (containing free oob)
-+ * into our local buffer
-+ */
-+static int copy_last_cw(struct qcom_nandc_data *this, bool use_ecc, int page)
-+{
-+ struct nand_chip *chip = &this->chip;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ int size;
-+ int r;
-+
-+ clear_read_regs(this);
-+
-+ size = use_ecc ? this->cw_data : this->cw_size;
-+
-+ /* prepare a clean read buffer */
-+ memset(this->data_buffer, 0xff, size);
-+
-+ this->use_ecc = use_ecc;
-+ set_address(this, this->cw_size * (ecc->steps - 1), page);
-+ update_rw_regs(this, 1, true);
-+
-+ config_cw_read(this);
-+
-+ read_data_dma(this, FLASH_BUF_ACC, this->data_buffer, size);
-+
-+ r = submit_descs(this);
-+ if (r)
-+ dev_err(this->dev, "failed to copy last codeword\n");
-+
-+ free_descs(this);
-+
-+ return r;
-+}
-+
-+/* implements ecc->read_page() */
-+static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint8_t *buf, int oob_required, int page)
-+{
-+ struct qcom_nandc_data *this = chip->priv;
-+ u8 *data_buf, *oob_buf = NULL;
-+ bool erased_page;
-+ int r;
-+
-+ data_buf = buf;
-+ oob_buf = oob_required ? chip->oob_poi : NULL;
-+
-+ r = read_page_low(this, data_buf, oob_buf);
-+ if (r) {
-+ dev_err(this->dev, "failure to read page\n");
-+ return r;
-+ }
-+
-+ erased_page = empty_page_fixup(this, data_buf);
-+
-+ return parse_read_errors(this, erased_page);
-+}
-+
-+/* implements ecc->read_oob() */
-+static int qcom_nandc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-+ int page)
-+{
-+ struct qcom_nandc_data *this = chip->priv;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ int r;
-+
-+ clear_read_regs(this);
-+
-+ this->use_ecc = true;
-+ set_address(this, 0, page);
-+ update_rw_regs(this, ecc->steps, true);
-+
-+ r = read_page_low(this, NULL, chip->oob_poi);
-+ if (r)
-+ dev_err(this->dev, "failure to read oob\n");
-+
-+ return r;
-+}
-+
-+/* implements ecc->read_oob_raw(), used to read the bad block marker flag */
-+static int qcom_nandc_read_oob_raw(struct mtd_info *mtd, struct nand_chip *chip,
-+ int page)
-+{
-+ struct qcom_nandc_data *this = chip->priv;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ uint8_t *oob = chip->oob_poi;
-+ int start, length;
-+ int r;
-+
-+ /*
-+ * configure registers for a raw page read, the address is set to the
-+ * beginning of the last codeword, we don't care about reading ecc
-+ * portion of oob, just the free stuff
-+ */
-+ r = copy_last_cw(this, false, page);
-+ if (r)
-+ return r;
-+
-+ /*
-+ * reading raw oob has 2 parts, first the bad block byte, then the
-+ * actual free oob region. perform a memcpy in two steps
-+ */
-+ start = mtd->writesize - (this->cw_size * (ecc->steps - 1));
-+ length = chip->options & NAND_BUSWIDTH_16 ? 2 : 1;
-+
-+ memcpy(oob, this->data_buffer + start, length);
-+
-+ oob += length;
-+
-+ start = this->cw_data - (ecc->steps << 2) + 1;
-+ length = ecc->steps << 2;
-+
-+ memcpy(oob, this->data_buffer + start, length);
-+
-+ return 0;
-+}
-+
-+/* implements ecc->write_page() */
-+static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
-+ const uint8_t *buf, int oob_required)
-+{
-+ struct qcom_nandc_data *this = chip->priv;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ u8 *data_buf, *oob_buf;
-+ int i, r = 0;
-+
-+ clear_read_regs(this);
-+
-+ data_buf = (u8 *) buf;
-+ oob_buf = chip->oob_poi;
-+
-+ this->use_ecc = true;
-+ update_rw_regs(this, ecc->steps, false);
-+
-+ for (i = 0; i < ecc->steps; i++) {
-+ int data_size, oob_size;
-+
-+ if (i == (ecc->steps - 1)) {
-+ data_size = ecc->size - ((ecc->steps - 1) << 2);
-+ oob_size = (ecc->steps << 2) + ecc->bytes;
-+ } else {
-+ data_size = this->cw_data;
-+ oob_size = ecc->bytes;
-+ }
-+
-+ config_cw_write_pre(this);
-+ write_data_dma(this, FLASH_BUF_ACC, data_buf, data_size);
-+
-+ /*
-+ * we don't really need to write anything to oob for the
-+ * first n - 1 codewords since these oob regions just
-+ * contain ecc that's written by the controller itself
-+ */
-+ if (i == (ecc->steps - 1))
-+ write_data_dma(this, FLASH_BUF_ACC + data_size,
-+ oob_buf, oob_size);
-+ config_cw_write_post(this);
-+
-+ data_buf += data_size;
-+ oob_buf += oob_size;
-+ }
-+
-+ r = submit_descs(this);
-+ if (r)
-+ dev_err(this->dev, "failure to write page\n");
-+
-+ free_descs(this);
-+
-+ return r;
-+}
-+
-+/*
-+ * implements ecc->write_oob()
-+ *
-+ * the NAND controller cannot write only data or only oob within a codeword,
-+ * since ecc is calculated for the combined codeword. we first copy the
-+ * entire contents for the last codeword(data + oob), replace the old oob
-+ * with the new one in chip->oob_poi, and then write the entire codeword.
-+ * this read-copy-write operation results in a slight perormance loss.
-+ */
-+static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
-+ int page)
-+{
-+ struct qcom_nandc_data *this = chip->priv;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ uint8_t *oob = chip->oob_poi;
-+ int free_boff;
-+ int data_size, oob_size;
-+ int r, status = 0;
-+
-+ r = copy_last_cw(this, true, page);
-+ if (r)
-+ return r;
-+
-+ clear_read_regs(this);
-+
-+ /* calculate the data and oob size for the last codeword/step */
-+ data_size = ecc->size - ((ecc->steps - 1) << 2);
-+ oob_size = (ecc->steps << 2) + ecc->bytes;
-+
-+ /*
-+ * the location of spare data in the oob buffer, we could also use
-+ * ecc->layout.oobfree here
-+ */
-+ free_boff = ecc->bytes * (ecc->steps - 1);
-+
-+ /* override new oob content to last codeword */
-+ memcpy(this->data_buffer + data_size, oob + free_boff, oob_size);
-+
-+ this->use_ecc = true;
-+ set_address(this, this->cw_size * (ecc->steps - 1), page);
-+ update_rw_regs(this, 1, false);
-+
-+ config_cw_write_pre(this);
-+ write_data_dma(this, FLASH_BUF_ACC, this->data_buffer,
-+ data_size + oob_size);
-+ config_cw_write_post(this);
-+
-+ r = submit_descs(this);
-+
-+ free_descs(this);
-+
-+ if (r) {
-+ dev_err(this->dev, "failure to write oob\n");
-+ return -EIO;
-+ }
-+
-+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+
-+ status = chip->waitfunc(mtd, chip);
-+
-+ return status & NAND_STATUS_FAIL ? -EIO : 0;
-+}
-+
-+/* implements ecc->write_oob_raw(), used to write bad block marker flag */
-+static int qcom_nandc_write_oob_raw(struct mtd_info *mtd,
-+ struct nand_chip *chip, int page)
-+{
-+ struct qcom_nandc_data *this = chip->priv;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ uint8_t *oob = chip->oob_poi;
-+ int start, length;
-+ int r, status = 0;
-+
-+ r = copy_last_cw(this, false, page);
-+ if (r)
-+ return r;
-+
-+ clear_read_regs(this);
-+
-+ /*
-+ * writing raw oob has 2 parts, first the bad block region, then the
-+ * actual free region
-+ */
-+ start = mtd->writesize - (this->cw_size * (ecc->steps - 1));
-+ length = chip->options & NAND_BUSWIDTH_16 ? 2 : 1;
-+
-+ memcpy(this->data_buffer + start, oob, length);
-+
-+ oob += length;
-+
-+ start = this->cw_data - (ecc->steps << 2) + 1;
-+ length = ecc->steps << 2;
-+
-+ memcpy(this->data_buffer + start, oob, length);
-+
-+ /* prepare write */
-+ this->use_ecc = false;
-+ set_address(this, this->cw_size * (ecc->steps - 1), page);
-+ update_rw_regs(this, 1, false);
-+
-+ config_cw_write_pre(this);
-+ write_data_dma(this, FLASH_BUF_ACC, this->data_buffer, this->cw_size);
-+ config_cw_write_post(this);
-+
-+ r = submit_descs(this);
-+
-+ free_descs(this);
-+
-+ if (r) {
-+ dev_err(this->dev, "failure to write updated oob\n");
-+ return -EIO;
-+ }
-+
-+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-+
-+ status = chip->waitfunc(mtd, chip);
-+
-+ return status & NAND_STATUS_FAIL ? -EIO : 0;
-+}
-+
-+/*
-+ * the three functions below implement chip->read_byte(), chip->read_buf()
-+ * and chip->write_buf() respectively. these aren't used for
-+ * reading/writing page data, they are used for smaller data like reading
-+ * id, status etc
-+ */
-+static uint8_t qcom_nandc_read_byte(struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct qcom_nandc_data *this = chip->priv;
-+ uint8_t *buf = this->data_buffer;
-+ uint8_t ret = 0x0;
-+
-+ if (this->last_command == NAND_CMD_STATUS) {
-+ ret = this->status;
-+
-+ this->status = NAND_STATUS_READY | NAND_STATUS_WP;
-+
-+ return ret;
-+ }
-+
-+ if (this->buf_start < this->buf_count)
-+ ret = buf[this->buf_start++];
-+
-+ return ret;
-+}
-+
-+static void qcom_nandc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct qcom_nandc_data *this = chip->priv;
-+ int real_len = min_t(size_t, len, this->buf_count - this->buf_start);
-+
-+ memcpy(buf, this->data_buffer + this->buf_start, real_len);
-+ this->buf_start += real_len;
-+}
-+
-+static void qcom_nandc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
-+ int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct qcom_nandc_data *this = chip->priv;
-+ int real_len = min_t(size_t, len, this->buf_count - this->buf_start);
-+
-+ memcpy(this->data_buffer + this->buf_start, buf, real_len);
-+
-+ this->buf_start += real_len;
-+}
-+
-+/* we support only one external chip for now */
-+static void qcom_nandc_select_chip(struct mtd_info *mtd, int chipnr)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct qcom_nandc_data *this = chip->priv;
-+
-+ if (chipnr <= 0)
-+ return;
-+
-+ dev_warn(this->dev, "invalid chip select\n");
-+}
-+
-+/*
-+ * NAND controller page layout info
-+ *
-+ * |-----------------------| |---------------------------------|
-+ * | xx.......xx| | *********xx.......xx|
-+ * | DATA xx..ECC..xx| | DATA **SPARE**xx..ECC..xx|
-+ * | (516) xx.......xx| | (516-n*4) **(n*4)**xx.......xx|
-+ * | xx.......xx| | *********xx.......xx|
-+ * |-----------------------| |---------------------------------|
-+ * codeword 1,2..n-1 codeword n
-+ * <---(528/532 Bytes)----> <-------(528/532 Bytes)---------->
-+ *
-+ * n = number of codewords in the page
-+ * . = ECC bytes
-+ * * = spare bytes
-+ * x = unused/reserved bytes
-+ *
-+ * 2K page: n = 4, spare = 16 bytes
-+ * 4K page: n = 8, spare = 32 bytes
-+ * 8K page: n = 16, spare = 64 bytes
-+ *
-+ * the qcom nand controller operates at a sub page/codeword level. each
-+ * codeword is 528 and 532 bytes for 4 bit and 8 bit ECC modes respectively.
-+ * the number of ECC bytes vary based on the ECC strength and the bus width.
-+ *
-+ * the first n - 1 codewords contains 516 bytes of user data, the remaining
-+ * 12/16 bytes consist of ECC and reserved data. The nth codeword contains
-+ * both user data and spare(oobavail) bytes that sum up to 516 bytes.
-+ *
-+ * the layout described above is used by the controller when the ECC block is
-+ * enabled. When we read a page with ECC enabled, the unused/reserved bytes are
-+ * skipped and not copied to our internal buffer. therefore, the nand_ecclayout
-+ * layouts defined below doesn't consider the positions occupied by the reserved
-+ * bytes
-+ *
-+ * when the ECC block is disabled, one unused byte (or two for 16 bit bus width)
-+ * in the last codeword is the position of bad block marker. the bad block
-+ * marker cannot be accessed when ECC is enabled.
-+ *
-+ */
-+
-+/*
-+ * Layouts for different page sizes and ecc modes. We skip the eccpos field
-+ * since it isn't needed for this driver
-+ */
-+
-+/* 2K page, 4 bit ECC */
-+static struct nand_ecclayout layout_oob_64 = {
-+ .eccbytes = 40,
-+ .oobfree = {
-+ { 30, 16 },
-+ },
-+};
-+
-+/* 4K page, 4 bit ECC, 8/16 bit bus width */
-+static struct nand_ecclayout layout_oob_128 = {
-+ .eccbytes = 80,
-+ .oobfree = {
-+ { 70, 32 },
-+ },
-+};
-+
-+/* 4K page, 8 bit ECC, 8 bit bus width */
-+static struct nand_ecclayout layout_oob_224_x8 = {
-+ .eccbytes = 104,
-+ .oobfree = {
-+ { 91, 32 },
-+ },
-+};
-+
-+/* 4K page, 8 bit ECC, 16 bit bus width */
-+static struct nand_ecclayout layout_oob_224_x16 = {
-+ .eccbytes = 112,
-+ .oobfree = {
-+ { 98, 32 },
-+ },
-+};
-+
-+/* 8K page, 4 bit ECC, 8/16 bit bus width */
-+static struct nand_ecclayout layout_oob_256 = {
-+ .eccbytes = 160,
-+ .oobfree = {
-+ { 151, 64 },
-+ },
-+};
-+
-+/*
-+ * this is called before scan_ident, we do some minimal configurations so
-+ * that reading ID and ONFI params work
-+ */
-+static void qcom_nandc_pre_init(struct qcom_nandc_data *this)
-+{
-+ /* kill onenand */
-+ nandc_write(this, SFLASHC_BURST_CFG, 0);
-+
-+ /* enable ADM DMA */
-+ nandc_write(this, NAND_FLASH_CHIP_SELECT, DM_EN);
-+
-+ /* save the original values of these registers */
-+ this->cmd1 = nandc_read(this, NAND_DEV_CMD1);
-+ this->vld = nandc_read(this, NAND_DEV_CMD_VLD);
-+
-+ /* initial status value */
-+ this->status = NAND_STATUS_READY | NAND_STATUS_WP;
-+}
-+
-+static int qcom_nandc_ecc_init(struct qcom_nandc_data *this)
-+{
-+ struct mtd_info *mtd = &this->mtd;
-+ struct nand_chip *chip = &this->chip;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ int cwperpage;
-+ bool wide_bus;
-+
-+ /* the nand controller fetches codewords/chunks of 512 bytes */
-+ cwperpage = mtd->writesize >> 9;
-+
-+ ecc->strength = this->ecc_strength;
-+
-+ wide_bus = chip->options & NAND_BUSWIDTH_16 ? true : false;
-+
-+ if (ecc->strength >= 8) {
-+ /* 8 bit ECC defaults to BCH ECC on all platforms */
-+ ecc->bytes = wide_bus ? 14 : 13;
-+ } else {
-+ /*
-+ * if the controller supports BCH for 4 bit ECC, the controller
-+ * uses lesser bytes for ECC. If RS is used, the ECC bytes is
-+ * always 10 bytes
-+ */
-+ if (this->ecc_modes & ECC_BCH_4BIT)
-+ ecc->bytes = wide_bus ? 8 : 7;
-+ else
-+ ecc->bytes = 10;
-+ }
-+
-+ /* each step consists of 512 bytes of data */
-+ ecc->size = NANDC_STEP_SIZE;
-+
-+ ecc->read_page = qcom_nandc_read_page;
-+ ecc->read_oob = qcom_nandc_read_oob;
-+ ecc->write_page = qcom_nandc_write_page;
-+ ecc->write_oob = qcom_nandc_write_oob;
-+
-+ /*
-+ * the bad block marker is readable only when we read the page with ECC
-+ * disabled. all the ops above run with ECC enabled. We need raw read
-+ * and write function for oob in order to access bad block marker.
-+ */
-+ ecc->read_oob_raw = qcom_nandc_read_oob_raw;
-+ ecc->write_oob_raw = qcom_nandc_write_oob_raw;
-+
-+ switch (mtd->oobsize) {
-+ case 64:
-+ ecc->layout = &layout_oob_64;
-+ break;
-+ case 128:
-+ ecc->layout = &layout_oob_128;
-+ break;
-+ case 224:
-+ if (wide_bus)
-+ ecc->layout = &layout_oob_224_x16;
-+ else
-+ ecc->layout = &layout_oob_224_x8;
-+ break;
-+ case 256:
-+ ecc->layout = &layout_oob_256;
-+ break;
-+ default:
-+ dev_err(this->dev, "unsupported NAND device, oobsize %d\n",
-+ mtd->oobsize);
-+ return -ENODEV;
-+ }
-+
-+ ecc->mode = NAND_ECC_HW;
-+
-+ /* enable ecc by default */
-+ this->use_ecc = true;
-+
-+ return 0;
-+}
-+
-+static void qcom_nandc_hw_post_init(struct qcom_nandc_data *this)
-+{
-+ struct mtd_info *mtd = &this->mtd;
-+ struct nand_chip *chip = &this->chip;
-+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-+ int cwperpage = mtd->writesize / ecc->size;
-+ int spare_bytes, bad_block_byte;
-+ bool wide_bus;
-+ int ecc_mode = 0;
-+
-+ wide_bus = chip->options & NAND_BUSWIDTH_16 ? true : false;
-+
-+ if (ecc->strength >= 8) {
-+ this->cw_size = 532;
-+
-+ spare_bytes = wide_bus ? 0 : 2;
-+
-+ this->bch_enabled = true;
-+ ecc_mode = 1;
-+ } else {
-+ this->cw_size = 528;
-+
-+ if (this->ecc_modes & ECC_BCH_4BIT) {
-+ spare_bytes = wide_bus ? 2 : 4;
-+
-+ this->bch_enabled = true;
-+ ecc_mode = 0;
-+ } else {
-+ spare_bytes = wide_bus ? 0 : 1;
-+ }
-+ }
-+
-+ /*
-+ * DATA_UD_BYTES varies based on whether the read/write command protects
-+ * spare data with ECC too. We protect spare data by default, so we set
-+ * it to main + spare data, which are 512 and 4 bytes respectively.
-+ */
-+ this->cw_data = 516;
-+
-+ bad_block_byte = mtd->writesize - this->cw_size * (cwperpage - 1) + 1;
-+
-+ this->cfg0 = (cwperpage - 1) << CW_PER_PAGE
-+ | this->cw_data << UD_SIZE_BYTES
-+ | 0 << DISABLE_STATUS_AFTER_WRITE
-+ | 5 << NUM_ADDR_CYCLES
-+ | ecc->bytes << ECC_PARITY_SIZE_BYTES_RS
-+ | 0 << STATUS_BFR_READ
-+ | 1 << SET_RD_MODE_AFTER_STATUS
-+ | spare_bytes << SPARE_SIZE_BYTES;
-+
-+ this->cfg1 = 7 << NAND_RECOVERY_CYCLES
-+ | 0 << CS_ACTIVE_BSY
-+ | bad_block_byte << BAD_BLOCK_BYTE_NUM
-+ | 0 << BAD_BLOCK_IN_SPARE_AREA
-+ | 2 << WR_RD_BSY_GAP
-+ | wide_bus << WIDE_FLASH
-+ | this->bch_enabled << ENABLE_BCH_ECC;
-+
-+ this->cfg0_raw = (cwperpage - 1) << CW_PER_PAGE
-+ | this->cw_size << UD_SIZE_BYTES
-+ | 5 << NUM_ADDR_CYCLES
-+ | 0 << SPARE_SIZE_BYTES;
-+
-+ this->cfg1_raw = 7 << NAND_RECOVERY_CYCLES
-+ | 0 << CS_ACTIVE_BSY
-+ | 17 << BAD_BLOCK_BYTE_NUM
-+ | 1 << BAD_BLOCK_IN_SPARE_AREA
-+ | 2 << WR_RD_BSY_GAP
-+ | wide_bus << WIDE_FLASH
-+ | 1 << DEV0_CFG1_ECC_DISABLE;
-+
-+ this->ecc_bch_cfg = this->bch_enabled << ECC_CFG_ECC_DISABLE
-+ | 0 << ECC_SW_RESET
-+ | this->cw_data << ECC_NUM_DATA_BYTES
-+ | 1 << ECC_FORCE_CLK_OPEN
-+ | ecc_mode << ECC_MODE
-+ | ecc->bytes << ECC_PARITY_SIZE_BYTES_BCH;
-+
-+ this->ecc_buf_cfg = 0x203 << NUM_STEPS;
-+
-+ this->clrflashstatus = FS_READY_BSY_N;
-+ this->clrreadstatus = 0xc0;
-+
-+ dev_dbg(this->dev,
-+ "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n",
-+ this->cfg0, this->cfg1, this->ecc_buf_cfg,
-+ this->ecc_bch_cfg, this->cw_size, this->cw_data,
-+ ecc->strength, ecc->bytes, cwperpage);
-+}
-+
-+static int qcom_nandc_alloc(struct qcom_nandc_data *this)
-+{
-+ int r;
-+
-+ r = dma_set_coherent_mask(this->dev, DMA_BIT_MASK(32));
-+ if (r) {
-+ dev_err(this->dev, "failed to set DMA mask\n");
-+ return r;
-+ }
-+
-+ /*
-+ * we use the internal buffer for reading ONFI params, reading small
-+ * data like ID and status, and preforming read-copy-write operations
-+ * when writing to a codeword partially. 532 is the maximum possible
-+ * size of a codeword for our nand controller
-+ */
-+ this->buf_size = 532;
-+
-+ this->data_buffer = devm_kzalloc(this->dev, this->buf_size, GFP_KERNEL);
-+ if (!this->data_buffer)
-+ return -ENOMEM;
-+
-+ this->regs = devm_kzalloc(this->dev, sizeof(*this->regs), GFP_KERNEL);
-+ if (!this->regs)
-+ return -ENOMEM;
-+
-+ this->reg_read_buf = devm_kzalloc(this->dev,
-+ MAX_REG_RD * sizeof(*this->reg_read_buf),
-+ GFP_KERNEL);
-+ if (!this->reg_read_buf)
-+ return -ENOMEM;
-+
-+ INIT_LIST_HEAD(&this->list);
-+
-+ this->chan = dma_request_slave_channel(this->dev, "rxtx");
-+ if (!this->chan) {
-+ dev_err(this->dev, "failed to request slave channel\n");
-+ return -ENODEV;
-+ }
-+
-+ return 0;
-+}
-+
-+static void qcom_nandc_unalloc(struct qcom_nandc_data *this)
-+{
-+ dma_release_channel(this->chan);
-+}
-+
-+static int qcom_nandc_init(struct qcom_nandc_data *this)
-+{
-+ struct mtd_info *mtd = &this->mtd;
-+ struct nand_chip *chip = &this->chip;
-+ struct device_node *np = this->dev->of_node;
-+ struct mtd_part_parser_data ppdata = { .of_node = np };
-+ int r;
-+
-+ mtd->priv = chip;
-+ mtd->name = "qcom-nandc";
-+ mtd->owner = THIS_MODULE;
-+
-+ chip->priv = this;
-+
-+ chip->cmdfunc = qcom_nandc_command;
-+ chip->select_chip = qcom_nandc_select_chip;
-+ chip->read_byte = qcom_nandc_read_byte;
-+ chip->read_buf = qcom_nandc_read_buf;
-+ chip->write_buf = qcom_nandc_write_buf;
-+
-+ chip->options |= NAND_NO_SUBPAGE_WRITE | NAND_USE_BOUNCE_BUFFER;
-+ if (this->bus_width == 16)
-+ chip->options |= NAND_BUSWIDTH_16;
-+
-+ chip->bbt_options = NAND_BBT_ACCESS_BBM_RAW;
-+ if (of_get_nand_on_flash_bbt(np))
-+ chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
-+
-+ qcom_nandc_pre_init(this);
-+
-+ r = nand_scan_ident(mtd, 1, NULL);
-+ if (r)
-+ return r;
-+
-+ r = qcom_nandc_ecc_init(this);
-+ if (r)
-+ return r;
-+
-+ qcom_nandc_hw_post_init(this);
-+
-+ r = nand_scan_tail(mtd);
-+ if (r)
-+ return r;
-+
-+ return mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
-+}
-+
-+static int qcom_nandc_parse_dt(struct platform_device *pdev)
-+{
-+ struct qcom_nandc_data *this = platform_get_drvdata(pdev);
-+ struct device_node *np = this->dev->of_node;
-+ int r;
-+
-+ this->ecc_strength = of_get_nand_ecc_strength(np);
-+ if (this->ecc_strength < 0) {
-+ dev_warn(this->dev,
-+ "incorrect ecc strength, setting to 4 bits/step\n");
-+ this->ecc_strength = 4;
-+ }
-+
-+ this->bus_width = of_get_nand_bus_width(np);
-+ if (this->bus_width < 0) {
-+ dev_warn(this->dev, "incorrect bus width, setting to 8\n");
-+ this->bus_width = 8;
-+ }
-+
-+ r = of_property_read_u32(np, "qcom,cmd-crci", &this->cmd_crci);
-+ if (r) {
-+ dev_err(this->dev, "command CRCI unspecified\n");
-+ return r;
-+ }
-+
-+ r = of_property_read_u32(np, "qcom,data-crci", &this->data_crci);
-+ if (r) {
-+ dev_err(this->dev, "data CRCI unspecified\n");
-+ return r;
-+ }
-+
-+ return 0;
-+}
-+
-+static int qcom_nandc_probe(struct platform_device *pdev)
-+{
-+ struct qcom_nandc_data *this;
-+ const struct of_device_id *match;
-+ int r;
-+
-+ this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL);
-+ if (!this)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, this);
-+
-+ this->pdev = pdev;
-+ this->dev = &pdev->dev;
-+
-+ match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
-+ if (!match) {
-+ dev_err(&pdev->dev, "failed to match device\n");
-+ return -ENODEV;
-+ }
-+
-+ if (!match->data) {
-+ dev_err(&pdev->dev, "failed to get device data\n");
-+ return -ENODEV;
-+ }
-+
-+ this->ecc_modes = (u32) match->data;
-+
-+ this->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ this->base = devm_ioremap_resource(&pdev->dev, this->res);
-+ if (IS_ERR(this->base))
-+ return PTR_ERR(this->base);
-+
-+ this->core_clk = devm_clk_get(&pdev->dev, "core");
-+ if (IS_ERR(this->core_clk))
-+ return PTR_ERR(this->core_clk);
-+
-+ this->aon_clk = devm_clk_get(&pdev->dev, "aon");
-+ if (IS_ERR(this->aon_clk))
-+ return PTR_ERR(this->aon_clk);
-+
-+ r = qcom_nandc_parse_dt(pdev);
-+ if (r)
-+ return r;
-+
-+ r = qcom_nandc_alloc(this);
-+ if (r)
-+ return r;
-+
-+ r = clk_prepare_enable(this->core_clk);
-+ if (r)
-+ goto err_core_clk;
-+
-+ r = clk_prepare_enable(this->aon_clk);
-+ if (r)
-+ goto err_aon_clk;
-+
-+ r = qcom_nandc_init(this);
-+ if (r)
-+ goto err_init;
-+
-+ return 0;
-+
-+err_init:
-+ clk_disable_unprepare(this->aon_clk);
-+err_aon_clk:
-+ clk_disable_unprepare(this->core_clk);
-+err_core_clk:
-+ qcom_nandc_unalloc(this);
-+
-+ return r;
-+}
-+
-+static int qcom_nandc_remove(struct platform_device *pdev)
-+{
-+ struct qcom_nandc_data *this = platform_get_drvdata(pdev);
-+
-+ qcom_nandc_unalloc(this);
-+
-+ clk_disable_unprepare(this->aon_clk);
-+ clk_disable_unprepare(this->core_clk);
-+
-+ return 0;
-+}
-+
-+#define EBI2_NANDC_ECC_MODES (ECC_RS_4BIT | ECC_BCH_8BIT)
-+
-+/*
-+ * data will hold a struct pointer containing more differences once we support
-+ * more IPs
-+ */
-+static const struct of_device_id qcom_nandc_of_match[] = {
-+ { .compatible = "qcom,ebi2-nandc",
-+ .data = (void *) EBI2_NANDC_ECC_MODES,
-+ },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, qcom_nandc_of_match);
-+
-+static struct platform_driver qcom_nandc_driver = {
-+ .driver = {
-+ .name = "qcom-nandc",
-+ .of_match_table = qcom_nandc_of_match,
-+ },
-+ .probe = qcom_nandc_probe,
-+ .remove = qcom_nandc_remove,
-+};
-+module_platform_driver(qcom_nandc_driver);
-+
-+MODULE_AUTHOR("Archit Taneja <architt@codeaurora.org>");
-+MODULE_DESCRIPTION("Qualcomm NAND Controller driver");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -55,5 +55,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) +=
- obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
- obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
- obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
-+obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
-
- nand-objs := nand_base.o nand_bbt.o nand_timings.o
diff --git a/target/linux/ipq806x/patches-4.4/163-dt-bindings-qcom_nandc-Add-DT-bindings.patch b/target/linux/ipq806x/patches-4.4/163-dt-bindings-qcom_nandc-Add-DT-bindings.patch
deleted file mode 100644
index 6530eb1c86..0000000000
--- a/target/linux/ipq806x/patches-4.4/163-dt-bindings-qcom_nandc-Add-DT-bindings.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,3/5] dt/bindings: qcom_nandc: Add DT bindings
-From: Archit Taneja <architt@codeaurora.org>
-X-Patchwork-Id: 6927141
-Message-Id: <1438578498-32254-4-git-send-email-architt@codeaurora.org>
-To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
- cernekee@gmail.com, computersforpeace@gmail.com
-Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
- sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
- Archit Taneja <architt@codeaurora.org>, devicetree@vger.kernel.org
-Date: Mon, 3 Aug 2015 10:38:16 +0530
-
-Add DT bindings document for the Qualcomm NAND controller driver.
-
-Cc: devicetree@vger.kernel.org
-
-v3:
-- Don't use '0x' when specifying nand controller address space
-- Add optional property for on-flash bbt usage
-
-Acked-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Archit Taneja <architt@codeaurora.org>
-
----
-.../devicetree/bindings/mtd/qcom_nandc.txt | 49 ++++++++++++++++++++++
- 1 file changed, 49 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
-@@ -0,0 +1,49 @@
-+* Qualcomm NAND controller
-+
-+Required properties:
-+- compatible: should be "qcom,ebi2-nand" for IPQ806x
-+- reg: MMIO address range
-+- clocks: must contain core clock and always on clock
-+- clock-names: must contain "core" for the core clock and "aon" for the
-+ always on clock
-+- dmas: DMA specifier, consisting of a phandle to the ADM DMA
-+ controller node and the channel number to be used for
-+ NAND. Refer to dma.txt and qcom_adm.txt for more details
-+- dma-names: must be "rxtx"
-+- qcom,cmd-crci: must contain the ADM command type CRCI block instance
-+ number specified for the NAND controller on the given
-+ platform
-+- qcom,data-crci: must contain the ADM data type CRCI block instance
-+ number specified for the NAND controller on the given
-+ platform
-+
-+Optional properties:
-+- nand-bus-width: bus width. Must be 8 or 16. If not present, 8 is chosen
-+ as default
-+
-+- nand-ecc-strength: number of bits to correct per ECC step. Must be 4 or 8
-+ bits. If not present, 4 is chosen as default
-+- nand-on-flash-bbt: Create/use on-flash bad block table
-+
-+The device tree may optionally contain sub-nodes describing partitions of the
-+address space. See partition.txt for more detail.
-+
-+Example:
-+
-+nand@1ac00000 {
-+ compatible = "qcom,ebi2-nandc";
-+ reg = <0x1ac00000 0x800>;
-+
-+ clocks = <&gcc EBI2_CLK>,
-+ <&gcc EBI2_AON_CLK>;
-+ clock-names = "core", "aon";
-+
-+ dmas = <&adm_dma 3>;
-+ dma-names = "rxtx";
-+ qcom,cmd-crci = <15>;
-+ qcom,data-crci = <3>;
-+
-+ partition@0 {
-+ ...
-+ };
-+};
diff --git a/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch b/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
deleted file mode 100644
index 664e7b5b53..0000000000
--- a/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,4/5] arm: qcom: dts: Add NAND controller node for ipq806x
-From: Archit Taneja <architt@codeaurora.org>
-X-Patchwork-Id: 6927121
-Message-Id: <1438578498-32254-5-git-send-email-architt@codeaurora.org>
-To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
- cernekee@gmail.com, computersforpeace@gmail.com
-Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
- sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
- Archit Taneja <architt@codeaurora.org>, devicetree@vger.kernel.org
-Date: Mon, 3 Aug 2015 10:38:17 +0530
-
-The nand controller in IPQ806x is of the 'EBI2 type'. Use the corresponding
-compatible string.
-
-Cc: devicetree@vger.kernel.org
-
-Reviewed-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Archit Taneja <architt@codeaurora.org>
-
----
-arch/arm/boot/dts/qcom-ipq8064.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -741,6 +741,22 @@
-
- status = "disabled";
- };
-+
-+ nand@1ac00000 {
-+ compatible = "qcom,ebi2-nandc";
-+ reg = <0x1ac00000 0x800>;
-+
-+ clocks = <&gcc EBI2_CLK>,
-+ <&gcc EBI2_AON_CLK>;
-+ clock-names = "core", "aon";
-+
-+ dmas = <&adm_dma 3>;
-+ dma-names = "rxtx";
-+ qcom,cmd-crci = <15>;
-+ qcom,data-crci = <3>;
-+
-+ status = "disabled";
-+ };
- };
-
- sfpb_mutex: sfpb-mutex {
diff --git a/target/linux/ipq806x/patches-4.4/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch b/target/linux/ipq806x/patches-4.4/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
deleted file mode 100644
index 9de3d8fe81..0000000000
--- a/target/linux/ipq806x/patches-4.4/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,5/5] arm: qcom: dts: Enable NAND node on IPQ8064 AP148 platform
-From: Archit Taneja <architt@codeaurora.org>
-X-Patchwork-Id: 6927091
-Message-Id: <1438578498-32254-6-git-send-email-architt@codeaurora.org>
-To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
- cernekee@gmail.com, computersforpeace@gmail.com
-Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
- sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
- Archit Taneja <architt@codeaurora.org>, devicetree@vger.kernel.org
-Date: Mon, 3 Aug 2015 10:38:18 +0530
-
-Enable the NAND controller node on the AP148 platform. Provide pinmux
-information.
-
-Cc: devicetree@vger.kernel.org
-
-Signed-off-by: Archit Taneja <architt@codeaurora.org>
-
----
-arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -43,6 +43,28 @@
- bias-none;
- };
- };
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
- };
-
- gsbi@16300000 {
-@@ -126,5 +148,19 @@
- status = "ok";
- phy-tx0-term-offset = <7>;
- };
-+
-+ nand@1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+ };
- };
- };
-+
-+&adm_dma {
-+ status = "ok";
-+};
diff --git a/target/linux/ipq806x/patches-4.4/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch b/target/linux/ipq806x/patches-4.4/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch
deleted file mode 100644
index 706028259d..0000000000
--- a/target/linux/ipq806x/patches-4.4/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -157,6 +157,8 @@
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
-+
-+ linux,part-probe = "qcom-smem";
- };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.4/167-ARM-qcom_rpm_fix_support_for_smb208.patch b/target/linux/ipq806x/patches-4.4/167-ARM-qcom_rpm_fix_support_for_smb208.patch
deleted file mode 100644
index 8da70340de..0000000000
--- a/target/linux/ipq806x/patches-4.4/167-ARM-qcom_rpm_fix_support_for_smb208.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-
-In commit "regulator: qcom: Rework to single platform device" the smb208 regulator
-used in IPQ8064 was left out.
-
-Add it to that new framework and update Docs accordingly.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
---- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
-+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
-@@ -59,6 +59,7 @@ Regulator nodes are identified by their
- "qcom,rpm-pm8058-regulators"
- "qcom,rpm-pm8901-regulators"
- "qcom,rpm-pm8921-regulators"
-+ "qcom,rpm-smb208-regulators"
-
- - vdd_l0_l1_lvs-supply:
- - vdd_l2_l11_l12-supply:
-@@ -156,6 +157,9 @@ pm8921:
- l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
- ncp
-
-+smb208:
-+ s1a, s1b, s2a, s2b
-+
- The content of each sub-node is defined by the standard binding for regulators -
- see regulator.txt - with additional custom properties described below:
-
---- a/drivers/regulator/qcom_rpm-regulator.c
-+++ b/drivers/regulator/qcom_rpm-regulator.c
-@@ -869,10 +869,19 @@ static const struct rpm_regulator_data r
- { }
- };
-
-+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
-+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
-+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
-+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
-+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
-+ { }
-+};
-+
- static const struct of_device_id rpm_of_match[] = {
- { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
- { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
- { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
-+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
- { }
- };
- MODULE_DEVICE_TABLE(of, rpm_of_match);
diff --git a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
deleted file mode 100644
index 1a15a8c645..0000000000
--- a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-Change DT to use new smb208 regulator driver.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -162,45 +162,37 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-- smb208_s1a: smb208-s1a {
-- compatible = "qcom,rpm-smb208";
-- reg = <QCOM_RPM_SMB208_S1a>;
-+ regulators {
-+ compatible = "qcom,rpm-smb208-regulators";
-
-- regulator-min-microvolt = <1050000>;
-- regulator-max-microvolt = <1150000>;
-+ smb208_s1a: s1a {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-
-- qcom,switch-mode-frequency = <1200000>;
-+ qcom,switch-mode-frequency = <1200000>;
-
-- };
--
-- smb208_s1b: smb208-s1b {
-- compatible = "qcom,rpm-smb208";
-- reg = <QCOM_RPM_SMB208_S1b>;
--
-- regulator-min-microvolt = <1050000>;
-- regulator-max-microvolt = <1150000>;
-+ };
-
-- qcom,switch-mode-frequency = <1200000>;
-- };
--
-- smb208_s2a: smb208-s2a {
-- compatible = "qcom,rpm-smb208";
-- reg = <QCOM_RPM_SMB208_S2a>;
-+ smb208_s1b: s1b {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-
-- regulator-min-microvolt = < 800000>;
-- regulator-max-microvolt = <1250000>;
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-
-- qcom,switch-mode-frequency = <1200000>;
-- };
-+ smb208_s2a: s2a {
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1250000>;
-
-- smb208_s2b: smb208-s2b {
-- compatible = "qcom,rpm-smb208";
-- reg = <QCOM_RPM_SMB208_S2b>;
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-
-- regulator-min-microvolt = < 800000>;
-- regulator-max-microvolt = <1250000>;
-+ smb208_s2b: s2b {
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1250000>;
-
-- qcom,switch-mode-frequency = <1200000>;
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
- };
- };
-
diff --git a/target/linux/ipq806x/patches-4.4/169-OPP-Support-adjusting-OPP-voltages-at-runtime.patch b/target/linux/ipq806x/patches-4.4/169-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
deleted file mode 100644
index 8f0afb504c..0000000000
--- a/target/linux/ipq806x/patches-4.4/169-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From 111139c943a082364fbbcd9e0cc94cd442481340 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Mon, 1 Jun 2015 18:47:56 -0700
-Subject: PM / OPP: Support adjusting OPP voltages at runtime
-
-On some SoCs the Adaptive Voltage Scaling (AVS) technique is
-employed to optimize the operating voltage of a device. At a
-given frequency, the hardware monitors dynamic factors and either
-makes a suggestion for how much to adjust a voltage for the
-current frequency, or it automatically adjusts the voltage
-without software intervention. Add an API to the OPP library for
-the former case, so that AVS type devices can update the voltages
-for an OPP when the hardware determines the voltage should
-change. The assumption is that drivers like CPUfreq or devfreq
-will register for the OPP notifiers and adjust the voltage
-according to suggestions that AVS makes.
-
-Cc: Nishanth Menon <nm@ti.com>
-Cc: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
----
- drivers/base/power/opp/core.c | 77 +++++++++++++++++++++++++++++++++++++++++++
- include/linux/pm_opp.h | 10 ++++++
- 2 files changed, 87 insertions(+)
-
---- a/drivers/base/power/opp/core.c
-+++ b/drivers/base/power/opp/core.c
-@@ -1039,6 +1039,83 @@ unlock:
- }
-
- /**
-+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an opp
-+ * @dev: device for which we do this operation
-+ * @freq: OPP frequency to adjust voltage of
-+ * @u_volt: new OPP voltage
-+ *
-+ * Change the voltage of an OPP with an RCU operation.
-+ *
-+ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
-+ * copy operation, returns 0 if no modifcation was done OR modification was
-+ * successful.
-+ *
-+ * Locking: The internal device_opp and opp structures are RCU protected.
-+ * Hence this function internally uses RCU updater strategy with mutex locks to
-+ * keep the integrity of the internal data structures. Callers should ensure
-+ * that this function is *NOT* called under RCU protection or in contexts where
-+ * mutex locking or synchronize_rcu() blocking calls cannot be used.
-+ */
-+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
-+ unsigned long u_volt)
-+{
-+ struct device_opp *dev_opp;
-+ struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
-+ int r = 0;
-+
-+ /* keep the node allocated */
-+ new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
-+ if (!new_opp)
-+ return -ENOMEM;
-+
-+ mutex_lock(&dev_opp_list_lock);
-+
-+ /* Find the device_opp */
-+ dev_opp = _find_device_opp(dev);
-+ if (IS_ERR(dev_opp)) {
-+ r = PTR_ERR(dev_opp);
-+ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
-+ goto unlock;
-+ }
-+
-+ /* Do we have the frequency? */
-+ list_for_each_entry(tmp_opp, &dev_opp->opp_list, node) {
-+ if (tmp_opp->rate == freq) {
-+ opp = tmp_opp;
-+ break;
-+ }
-+ }
-+ if (IS_ERR(opp)) {
-+ r = PTR_ERR(opp);
-+ goto unlock;
-+ }
-+
-+ /* Is update really needed? */
-+ if (opp->u_volt == u_volt)
-+ goto unlock;
-+ /* copy the old data over */
-+ *new_opp = *opp;
-+
-+ /* plug in new node */
-+ new_opp->u_volt = u_volt;
-+
-+ list_replace_rcu(&opp->node, &new_opp->node);
-+ mutex_unlock(&dev_opp_list_lock);
-+ call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
-+
-+ /* Notify the change of the OPP */
-+ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADJUST_VOLTAGE,
-+ new_opp);
-+
-+ return 0;
-+
-+unlock:
-+ mutex_unlock(&dev_opp_list_lock);
-+ kfree(new_opp);
-+ return r;
-+}
-+
-+/**
- * dev_pm_opp_enable() - Enable a specific OPP
- * @dev: device for which we do this operation
- * @freq: OPP frequency to enable
---- a/include/linux/pm_opp.h
-+++ b/include/linux/pm_opp.h
-@@ -22,6 +22,7 @@ struct device;
-
- enum dev_pm_opp_event {
- OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
-+ OPP_EVENT_ADJUST_VOLTAGE,
- };
-
- #if defined(CONFIG_PM_OPP)
-@@ -50,6 +51,9 @@ int dev_pm_opp_add(struct device *dev, u
- unsigned long u_volt);
- void dev_pm_opp_remove(struct device *dev, unsigned long freq);
-
-+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
-+ unsigned long u_volt);
-+
- int dev_pm_opp_enable(struct device *dev, unsigned long freq);
-
- int dev_pm_opp_disable(struct device *dev, unsigned long freq);
-@@ -114,6 +118,12 @@ static inline void dev_pm_opp_remove(str
- {
- }
-
-+static inline int dev_pm_opp_adjust_voltage(struct device *dev,
-+ unsigned long freq, unsigned long u_volt)
-+{
-+ return 0;
-+}
-+
- static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
- {
- return 0;
diff --git a/target/linux/ipq806x/patches-4.4/170-OPP-Allow-notifiers-to-call-dev_pm_opp_get_voltage-freq-RCU-free.patch b/target/linux/ipq806x/patches-4.4/170-OPP-Allow-notifiers-to-call-dev_pm_opp_get_voltage-freq-RCU-free.patch
deleted file mode 100644
index 7be47a3509..0000000000
--- a/target/linux/ipq806x/patches-4.4/170-OPP-Allow-notifiers-to-call-dev_pm_opp_get_voltage-freq-RCU-free.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From d330eae026b4a73e77ca0422f5cae5207d80f738 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Mon, 1 Jun 2015 18:47:57 -0700
-Subject: OPP: Allow notifiers to call dev_pm_opp_get_{voltage, freq} RCU-free
-
-We pass the dev_pm_opp structure to OPP notifiers but the users
-of the notifier need to surround calls to dev_pm_opp_get_*() with
-RCU read locks to avoid lockdep warnings. The notifier is already
-called with the dev_opp's srcu lock held, so it should be safe to
-assume the devm_pm_opp structure is already protected inside the
-notifier. Update the lockdep check for this.
-
-Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/base/power/opp/core.c | 27 +++++++++++++++------------
- 1 file changed, 15 insertions(+), 12 deletions(-)
-
---- a/drivers/base/power/opp/core.c
-+++ b/drivers/base/power/opp/core.c
-@@ -31,9 +31,10 @@ static LIST_HEAD(dev_opp_list);
- /* Lock to allow exclusive modification to the device and opp lists */
- DEFINE_MUTEX(dev_opp_list_lock);
-
--#define opp_rcu_lockdep_assert() \
-+#define opp_rcu_lockdep_assert(s) \
- do { \
- RCU_LOCKDEP_WARN(!rcu_read_lock_held() && \
-+ !(s && srcu_read_lock_held(s)) && \
- !lockdep_is_held(&dev_opp_list_lock), \
- "Missing rcu_read_lock() or " \
- "dev_opp_list_lock protection"); \
-@@ -91,7 +92,7 @@ struct device_opp *_find_device_opp(stru
- {
- struct device_opp *dev_opp;
-
-- opp_rcu_lockdep_assert();
-+ opp_rcu_lockdep_assert(NULL);
-
- if (IS_ERR_OR_NULL(dev)) {
- pr_err("%s: Invalid parameters\n", __func__);
-@@ -125,10 +126,11 @@ unsigned long dev_pm_opp_get_voltage(str
- struct dev_pm_opp *tmp_opp;
- unsigned long v = 0;
-
-- opp_rcu_lockdep_assert();
-+ opp_rcu_lockdep_assert(&opp->dev_opp->srcu_head.srcu);
-
-- tmp_opp = rcu_dereference(opp);
-- if (IS_ERR_OR_NULL(tmp_opp))
-+ tmp_opp = srcu_dereference_check(opp, &opp->dev_opp->srcu_head.srcu,
-+ rcu_read_lock_held());
-+ if (IS_ERR_OR_NULL(tmp_opp) || !tmp_opp->available)
- pr_err("%s: Invalid parameters\n", __func__);
- else
- v = tmp_opp->u_volt;
-@@ -157,9 +159,10 @@ unsigned long dev_pm_opp_get_freq(struct
- struct dev_pm_opp *tmp_opp;
- unsigned long f = 0;
-
-- opp_rcu_lockdep_assert();
-+ opp_rcu_lockdep_assert(&opp->dev_opp->srcu_head.srcu);
-
-- tmp_opp = rcu_dereference(opp);
-+ tmp_opp = srcu_dereference_check(opp, &opp->dev_opp->srcu_head.srcu,
-+ rcu_read_lock_held());
- if (IS_ERR_OR_NULL(tmp_opp) || !tmp_opp->available)
- pr_err("%s: Invalid parameters\n", __func__);
- else
-@@ -191,7 +194,7 @@ bool dev_pm_opp_is_turbo(struct dev_pm_o
- {
- struct dev_pm_opp *tmp_opp;
-
-- opp_rcu_lockdep_assert();
-+ opp_rcu_lockdep_assert(&opp->dev_opp->srcu_head.srcu);
-
- tmp_opp = rcu_dereference(opp);
- if (IS_ERR_OR_NULL(tmp_opp) || !tmp_opp->available) {
-@@ -246,7 +249,7 @@ struct dev_pm_opp *dev_pm_opp_get_suspen
- {
- struct device_opp *dev_opp;
-
-- opp_rcu_lockdep_assert();
-+ opp_rcu_lockdep_assert(NULL);
-
- dev_opp = _find_device_opp(dev);
- if (IS_ERR(dev_opp) || !dev_opp->suspend_opp ||
-@@ -326,7 +329,7 @@ struct dev_pm_opp *dev_pm_opp_find_freq_
- struct device_opp *dev_opp;
- struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-- opp_rcu_lockdep_assert();
-+ opp_rcu_lockdep_assert(NULL);
-
- dev_opp = _find_device_opp(dev);
- if (IS_ERR(dev_opp)) {
-@@ -374,7 +377,7 @@ struct dev_pm_opp *dev_pm_opp_find_freq_
- struct device_opp *dev_opp;
- struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-- opp_rcu_lockdep_assert();
-+ opp_rcu_lockdep_assert(NULL);
-
- if (!dev || !freq) {
- dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
-@@ -424,7 +427,7 @@ struct dev_pm_opp *dev_pm_opp_find_freq_
- struct device_opp *dev_opp;
- struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-- opp_rcu_lockdep_assert();
-+ opp_rcu_lockdep_assert(NULL);
-
- if (!dev || !freq) {
- dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
diff --git a/target/linux/ipq806x/patches-4.4/172-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch b/target/linux/ipq806x/patches-4.4/172-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
deleted file mode 100644
index 60ebe13b1b..0000000000
--- a/target/linux/ipq806x/patches-4.4/172-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From 175329015c8a0b480240da222822d2f8316f074d Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Mon, 1 Jun 2015 18:47:58 -0700
-Subject: cpufreq-dt: Handle OPP voltage adjust events
-
-On some SoCs the Adaptive Voltage Scaling (AVS) technique is
-employed to optimize the operating voltage of a device. At a
-given frequency, the hardware monitors dynamic factors and either
-makes a suggestion for how much to adjust a voltage for the
-current frequency, or it automatically adjusts the voltage
-without software intervention.
-
-In the former case, an AVS driver will call
-dev_pm_opp_modify_voltage() and update the voltage for the
-particular OPP the CPUs are using. Add an OPP notifier to
-cpufreq-dt so that we can adjust the voltage of the CPU when AVS
-updates the OPP.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/cpufreq/cpufreq-dt.c | 72 ++++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 66 insertions(+), 6 deletions(-)
-
---- a/drivers/cpufreq/cpufreq-dt.c
-+++ b/drivers/cpufreq/cpufreq-dt.c
-@@ -34,6 +34,9 @@ struct private_data {
- struct regulator *cpu_reg;
- struct thermal_cooling_device *cdev;
- unsigned int voltage_tolerance; /* in percentage */
-+ struct notifier_block opp_nb;
-+ struct mutex lock;
-+ unsigned long opp_freq;
- };
-
- static struct freq_attr *cpufreq_dt_attr[] = {
-@@ -42,6 +45,42 @@ static struct freq_attr *cpufreq_dt_attr
- NULL,
- };
-
-+static int opp_notifier(struct notifier_block *nb, unsigned long event,
-+ void *data)
-+{
-+ struct dev_pm_opp *opp = data;
-+ struct private_data *priv = container_of(nb, struct private_data,
-+ opp_nb);
-+ struct device *cpu_dev = priv->cpu_dev;
-+ struct regulator *cpu_reg = priv->cpu_reg;
-+ unsigned long volt, tol, freq;
-+ int ret = 0;
-+
-+ switch (event) {
-+ case OPP_EVENT_ADJUST_VOLTAGE:
-+ volt = dev_pm_opp_get_voltage(opp);
-+ freq = dev_pm_opp_get_freq(opp);
-+ tol = volt * priv->voltage_tolerance / 100;
-+
-+ mutex_lock(&priv->lock);
-+ if (freq == priv->opp_freq)
-+ ret = regulator_set_voltage_tol(cpu_reg, volt,
-+ tol);
-+ mutex_unlock(&priv->lock);
-+ if (ret) {
-+ dev_err(cpu_dev,
-+ "failed to scale voltage up: %d\n",
-+ ret);
-+ return ret;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
- static int set_target(struct cpufreq_policy *policy, unsigned int index)
- {
- struct dev_pm_opp *opp;
-@@ -53,6 +92,7 @@ static int set_target(struct cpufreq_pol
- unsigned long volt = 0, volt_old = 0, tol = 0;
- unsigned int old_freq, new_freq;
- long freq_Hz, freq_exact;
-+ unsigned long opp_freq = 0;
- int ret;
-
- freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
-@@ -63,8 +103,8 @@ static int set_target(struct cpufreq_pol
- new_freq = freq_Hz / 1000;
- old_freq = clk_get_rate(cpu_clk) / 1000;
-
-+ mutex_lock(&priv->lock);
- if (!IS_ERR(cpu_reg)) {
-- unsigned long opp_freq;
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
-@@ -72,7 +112,8 @@ static int set_target(struct cpufreq_pol
- rcu_read_unlock();
- dev_err(cpu_dev, "failed to find OPP for %ld\n",
- freq_Hz);
-- return PTR_ERR(opp);
-+ ret = PTR_ERR(opp);
-+ goto out;
- }
- volt = dev_pm_opp_get_voltage(opp);
- opp_freq = dev_pm_opp_get_freq(opp);
-@@ -93,7 +134,7 @@ static int set_target(struct cpufreq_pol
- if (ret) {
- dev_err(cpu_dev, "failed to scale voltage up: %d\n",
- ret);
-- return ret;
-+ goto out;
- }
- }
-
-@@ -102,7 +143,7 @@ static int set_target(struct cpufreq_pol
- dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
- if (!IS_ERR(cpu_reg) && volt_old > 0)
- regulator_set_voltage_tol(cpu_reg, volt_old, tol);
-- return ret;
-+ goto out;
- }
-
- /* scaling down? scale voltage after frequency */
-@@ -112,9 +153,12 @@ static int set_target(struct cpufreq_pol
- dev_err(cpu_dev, "failed to scale voltage down: %d\n",
- ret);
- clk_set_rate(cpu_clk, old_freq * 1000);
-+ goto out;
- }
- }
--
-+ priv->opp_freq = opp_freq;
-+out:
-+ mutex_unlock(&priv->lock);
- return ret;
- }
-
-@@ -201,6 +245,7 @@ static int cpufreq_init(struct cpufreq_p
- unsigned int transition_latency;
- bool need_update = false;
- int ret;
-+ struct srcu_notifier_head *opp_srcu_head;
-
- ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
- if (ret) {
-@@ -277,6 +322,19 @@ static int cpufreq_init(struct cpufreq_p
- goto out_free_opp;
- }
-
-+ mutex_init(&priv->lock);
-+
-+ opp_srcu_head = dev_pm_opp_get_notifier(cpu_dev);
-+ if (IS_ERR(opp_srcu_head)) {
-+ ret = PTR_ERR(opp_srcu_head);
-+ goto out_free_priv;
-+ }
-+
-+ priv->opp_nb.notifier_call = opp_notifier;
-+ ret = srcu_notifier_chain_register(opp_srcu_head, &priv->opp_nb);
-+ if (ret)
-+ goto out_free_priv;
-+
- of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
-
- if (!transition_latency)
-@@ -326,7 +384,7 @@ static int cpufreq_init(struct cpufreq_p
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
- if (ret) {
- pr_err("failed to init cpufreq table: %d\n", ret);
-- goto out_free_priv;
-+ goto out_unregister_nb;
- }
-
- priv->cpu_dev = cpu_dev;
-@@ -365,6 +423,8 @@ static int cpufreq_init(struct cpufreq_p
-
- out_free_cpufreq_table:
- dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-+out_unregister_nb:
-+ srcu_notifier_chain_unregister(opp_srcu_head, &priv->opp_nb);
- out_free_priv:
- kfree(priv);
- out_free_opp:
diff --git a/target/linux/ipq806x/patches-4.4/173-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-4.4/173-cpufreq-dt-Add-L2-frequency-scaling-support.patch
deleted file mode 100644
index 56930520c9..0000000000
--- a/target/linux/ipq806x/patches-4.4/173-cpufreq-dt-Add-L2-frequency-scaling-support.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From b4629f9e30e865402c643de6d4668be790fc0539 Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Tue, 8 Sep 2015 11:24:41 +0300
-Subject: cpufreq-dt: Add L2 frequency scaling support
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-
-Conflicts:
- drivers/cpufreq/cpufreq-dt.c
----
- drivers/cpufreq/cpufreq-dt.c | 54 ++++++++++++++++++++++++++++++++++++++------
- include/linux/cpufreq.h | 2 ++
- 2 files changed, 49 insertions(+), 7 deletions(-)
-
---- a/drivers/cpufreq/cpufreq-dt.c
-+++ b/drivers/cpufreq/cpufreq-dt.c
-@@ -86,11 +86,13 @@ static int set_target(struct cpufreq_pol
- struct dev_pm_opp *opp;
- struct cpufreq_frequency_table *freq_table = policy->freq_table;
- struct clk *cpu_clk = policy->clk;
-+ struct clk *l2_clk = policy->l2_clk;
- struct private_data *priv = policy->driver_data;
- struct device *cpu_dev = priv->cpu_dev;
- struct regulator *cpu_reg = priv->cpu_reg;
- unsigned long volt = 0, volt_old = 0, tol = 0;
-- unsigned int old_freq, new_freq;
-+ unsigned int old_freq, new_freq, l2_freq;
-+ unsigned long new_l2_freq = 0;
- long freq_Hz, freq_exact;
- unsigned long opp_freq = 0;
- int ret;
-@@ -146,6 +148,30 @@ static int set_target(struct cpufreq_pol
- goto out;
- }
-
-+ if (!IS_ERR(l2_clk) && policy->l2_rate[0] && policy->l2_rate[1] &&
-+ policy->l2_rate[2]) {
-+ static unsigned long krait_l2[CONFIG_NR_CPUS] = { };
-+ int cpu, ret = 0;
-+
-+ if (freq_exact >= policy->l2_rate[2])
-+ new_l2_freq = policy->l2_rate[2];
-+ else if (freq_exact >= policy->l2_rate[1])
-+ new_l2_freq = policy->l2_rate[1];
-+ else
-+ new_l2_freq = policy->l2_rate[0];
-+
-+ krait_l2[policy->cpu] = new_l2_freq;
-+ for_each_present_cpu(cpu)
-+ new_l2_freq = max(new_l2_freq, krait_l2[cpu]);
-+
-+ l2_freq = clk_get_rate(l2_clk);
-+
-+ if (l2_freq != new_l2_freq) {
-+ /* scale l2 with the core */
-+ ret = clk_set_rate(l2_clk, new_l2_freq);
-+ }
-+ }
-+
- /* scaling down? scale voltage after frequency */
- if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
- ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-@@ -156,18 +182,21 @@ static int set_target(struct cpufreq_pol
- goto out;
- }
- }
-+
- priv->opp_freq = opp_freq;
-+
- out:
- mutex_unlock(&priv->lock);
- return ret;
- }
-
- static int allocate_resources(int cpu, struct device **cdev,
-- struct regulator **creg, struct clk **cclk)
-+ struct regulator **creg, struct clk **cclk,
-+ struct clk **l2)
- {
- struct device *cpu_dev;
- struct regulator *cpu_reg;
-- struct clk *cpu_clk;
-+ struct clk *cpu_clk, *l2_clk = NULL;
- int ret = 0;
- char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg;
-
-@@ -227,6 +256,10 @@ try_again:
- *cdev = cpu_dev;
- *creg = cpu_reg;
- *cclk = cpu_clk;
-+
-+ l2_clk = clk_get(cpu_dev, "l2");
-+ if (!IS_ERR(l2_clk))
-+ *l2 = l2_clk;
- }
-
- return ret;
-@@ -236,18 +269,20 @@ static int cpufreq_init(struct cpufreq_p
- {
- struct cpufreq_frequency_table *freq_table;
- struct device_node *np;
-+ struct device_node *l2_np;
- struct private_data *priv;
- struct device *cpu_dev;
- struct regulator *cpu_reg;
-- struct clk *cpu_clk;
- struct dev_pm_opp *suspend_opp;
-+ struct clk *cpu_clk, *l2_clk;
- unsigned long min_uV = ~0, max_uV = 0;
- unsigned int transition_latency;
- bool need_update = false;
- int ret;
- struct srcu_notifier_head *opp_srcu_head;
-
-- ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
-+ ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk,
-+ &l2_clk);
- if (ret) {
- pr_err("%s: Failed to allocate resources: %d\n", __func__, ret);
- return ret;
-@@ -398,6 +433,11 @@ static int cpufreq_init(struct cpufreq_p
- if (suspend_opp)
- policy->suspend_freq = dev_pm_opp_get_freq(suspend_opp) / 1000;
- rcu_read_unlock();
-+ policy->l2_clk = l2_clk;
-+
-+ l2_np = of_find_node_by_name(NULL, "qcom,l2");
-+ if (l2_np)
-+ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
-
- ret = cpufreq_table_validate_and_show(policy, freq_table);
- if (ret) {
-@@ -498,7 +538,7 @@ static int dt_cpufreq_probe(struct platf
- {
- struct device *cpu_dev;
- struct regulator *cpu_reg;
-- struct clk *cpu_clk;
-+ struct clk *cpu_clk, *l2_clk;
- int ret;
-
- /*
-@@ -508,7 +548,7 @@ static int dt_cpufreq_probe(struct platf
- *
- * FIXME: Is checking this only for CPU0 sufficient ?
- */
-- ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk);
-+ ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk, &l2_clk);
- if (ret)
- return ret;
-
---- a/include/linux/cpufreq.h
-+++ b/include/linux/cpufreq.h
-@@ -67,6 +67,8 @@ struct cpufreq_policy {
- unsigned int cpu; /* cpu managing this policy, must be online */
-
- struct clk *clk;
-+ struct clk *l2_clk; /* L2 clock */
-+ unsigned int l2_rate[3]; /* L2 bus clock rate thresholds */
- struct cpufreq_cpuinfo cpuinfo;/* see above */
-
- unsigned int min; /* in kHz */
diff --git a/target/linux/ipq806x/patches-4.4/174-cpufreq-dt-Add-missing-rcu_read_lock-for-find_device_opp.patch b/target/linux/ipq806x/patches-4.4/174-cpufreq-dt-Add-missing-rcu_read_lock-for-find_device_opp.patch
deleted file mode 100644
index 124272154f..0000000000
--- a/target/linux/ipq806x/patches-4.4/174-cpufreq-dt-Add-missing-rcu_read_lock-for-find_device_opp.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From dafae9c5b39e2871bfd8db0b4bad6e850e42ef49 Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Wed, 13 Jan 2016 15:10:25 +0200
-Subject: cpufreq-dt: Add missing rcu_read_lock() for find_device_opp()
-
-The function dev_pm_opp_get_notifier() must be called with held
-rcu_read_lock. In order to keep the pointer valid, add rcu_read_lock().
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/cpufreq/cpufreq-dt.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/cpufreq/cpufreq-dt.c
-+++ b/drivers/cpufreq/cpufreq-dt.c
-@@ -359,14 +359,17 @@ static int cpufreq_init(struct cpufreq_p
-
- mutex_init(&priv->lock);
-
-+ rcu_read_lock();
- opp_srcu_head = dev_pm_opp_get_notifier(cpu_dev);
- if (IS_ERR(opp_srcu_head)) {
- ret = PTR_ERR(opp_srcu_head);
-+ rcu_read_unlock();
- goto out_free_priv;
- }
-
- priv->opp_nb.notifier_call = opp_notifier;
- ret = srcu_notifier_chain_register(opp_srcu_head, &priv->opp_nb);
-+ rcu_read_unlock();
- if (ret)
- goto out_free_priv;
-
diff --git a/target/linux/ipq806x/patches-4.4/175-add-regmap-mux-div.patch b/target/linux/ipq806x/patches-4.4/175-add-regmap-mux-div.patch
deleted file mode 100644
index b5c23b5165..0000000000
--- a/target/linux/ipq806x/patches-4.4/175-add-regmap-mux-div.patch
+++ /dev/null
@@ -1,386 +0,0 @@
-From 7727b1cae43e9abac746ef016c3dbf50ee81a6d6 Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Wed, 18 Mar 2015 17:23:29 +0200
-Subject: clk: qcom: Add support for regmap mux-div clocks
-
-Add support for hardware that support switching both parent clocks and the
-divider at the same time. This avoids generating intermediate frequencies
-from either the old parent clock and new divider or new parent clock and
-old divider combinations.
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-regmap-mux-div.c | 288 ++++++++++++++++++++++++++++++++++
- drivers/clk/qcom/clk-regmap-mux-div.h | 63 ++++++++
- 3 files changed, 352 insertions(+)
- create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.c
- create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.h
-
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -8,6 +8,7 @@ clk-qcom-y += clk-rcg2.o
- clk-qcom-y += clk-branch.o
- clk-qcom-y += clk-regmap-divider.o
- clk-qcom-y += clk-regmap-mux.o
-+clk-qcom-y += clk-regmap-mux-div.o
- clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
- obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
- clk-qcom-y += clk-hfpll.o
---- /dev/null
-+++ b/drivers/clk/qcom/clk-regmap-mux-div.c
-@@ -0,0 +1,288 @@
-+/*
-+ * Copyright (c) 2015, Linaro Limited
-+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/export.h>
-+#include <linux/kernel.h>
-+#include <linux/regmap.h>
-+
-+#include "clk-regmap-mux-div.h"
-+
-+#define CMD_RCGR 0x0
-+#define CMD_RCGR_UPDATE BIT(0)
-+#define CMD_RCGR_DIRTY_CFG BIT(4)
-+#define CMD_RCGR_ROOT_OFF BIT(31)
-+#define CFG_RCGR 0x4
-+
-+static int __mux_div_update_config(struct clk_regmap_mux_div *md)
-+{
-+ int ret;
-+ u32 val, count;
-+ const char *name = clk_hw_get_name(&md->clkr.hw);
-+
-+ ret = regmap_update_bits(md->clkr.regmap, CMD_RCGR + md->reg_offset,
-+ CMD_RCGR_UPDATE, CMD_RCGR_UPDATE);
-+ if (ret)
-+ return ret;
-+
-+ /* Wait for update to take effect */
-+ for (count = 500; count > 0; count--) {
-+ ret = regmap_read(md->clkr.regmap, CMD_RCGR + md->reg_offset,
-+ &val);
-+ if (ret)
-+ return ret;
-+ if (!(val & CMD_RCGR_UPDATE))
-+ return 0;
-+ udelay(1);
-+ }
-+
-+ pr_err("%s: RCG did not update its configuration", name);
-+ return -EBUSY;
-+}
-+
-+static int __mux_div_set_src_div(struct clk_regmap_mux_div *md, u32 src_sel,
-+ u32 src_div)
-+{
-+ int ret;
-+ u32 val, mask;
-+
-+ val = (src_div << md->hid_shift) | (src_sel << md->src_shift);
-+ mask = ((BIT(md->hid_width) - 1) << md->hid_shift) |
-+ ((BIT(md->src_width) - 1) << md->src_shift);
-+
-+ ret = regmap_update_bits(md->clkr.regmap, CFG_RCGR + md->reg_offset,
-+ mask, val);
-+ if (ret)
-+ return ret;
-+
-+ return __mux_div_update_config(md);
-+}
-+
-+static void __mux_div_get_src_div(struct clk_regmap_mux_div *md, u32 *src_sel,
-+ u32 *src_div)
-+{
-+ u32 val, div, src;
-+ const char *name = clk_hw_get_name(&md->clkr.hw);
-+
-+ regmap_read(md->clkr.regmap, CMD_RCGR + md->reg_offset, &val);
-+
-+ if (val & CMD_RCGR_DIRTY_CFG) {
-+ pr_err("%s: RCG configuration is pending\n", name);
-+ return;
-+ }
-+
-+ regmap_read(md->clkr.regmap, CFG_RCGR + md->reg_offset, &val);
-+ src = (val >> md->src_shift);
-+ src &= BIT(md->src_width) - 1;
-+ *src_sel = src;
-+
-+ div = (val >> md->hid_shift);
-+ div &= BIT(md->hid_width) - 1;
-+ *src_div = div;
-+}
-+
-+static int mux_div_enable(struct clk_hw *hw)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+
-+ return __mux_div_set_src_div(md, md->src_sel, md->div);
-+}
-+
-+static inline bool is_better_rate(unsigned long req, unsigned long best,
-+ unsigned long new)
-+{
-+ return (req <= new && new < best) || (best < req && best < new);
-+}
-+
-+static int mux_div_determine_rate(struct clk_hw *hw,
-+ struct clk_rate_request *req)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+ unsigned int i, div, max_div;
-+ unsigned long actual_rate, best_rate = 0;
-+ unsigned long req_rate = req->rate;
-+
-+ for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
-+ struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
-+ unsigned long parent_rate = clk_hw_get_rate(parent);
-+
-+ max_div = BIT(md->hid_width) - 1;
-+ for (div = 1; div < max_div; div++) {
-+ parent_rate = mult_frac(req_rate, div, 2);
-+ parent_rate = clk_hw_round_rate(parent, parent_rate);
-+ actual_rate = mult_frac(parent_rate, 2, div);
-+
-+ if (is_better_rate(req_rate, best_rate, actual_rate)) {
-+ best_rate = actual_rate;
-+ req->rate = best_rate;
-+ req->best_parent_rate = parent_rate;
-+ req->best_parent_hw = parent;
-+ }
-+
-+ if (actual_rate < req_rate || best_rate <= req_rate)
-+ break;
-+ }
-+ }
-+
-+ if (!best_rate)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static int __mux_div_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
-+ unsigned long prate, u32 src_sel)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+ int ret, i;
-+ u32 div, max_div, best_src = 0, best_div = 0;
-+ unsigned long actual_rate, best_rate = 0;
-+
-+ for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
-+ struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
-+ unsigned long parent_rate = clk_hw_get_rate(parent);
-+
-+ max_div = BIT(md->hid_width) - 1;
-+ for (div = 1; div < max_div; div++) {
-+ parent_rate = mult_frac(rate, div, 2);
-+ parent_rate = clk_hw_round_rate(parent, parent_rate);
-+ actual_rate = mult_frac(parent_rate, 2, div);
-+
-+ if (is_better_rate(rate, best_rate, actual_rate)) {
-+ best_rate = actual_rate;
-+ best_src = md->parent_map[i].cfg;
-+ best_div = div - 1;
-+ }
-+
-+ if (actual_rate < rate || best_rate <= rate)
-+ break;
-+ }
-+ }
-+
-+ ret = __mux_div_set_src_div(md, best_src, best_div);
-+ if (!ret) {
-+ md->div = best_div;
-+ md->src_sel = best_src;
-+ }
-+
-+ return ret;
-+}
-+
-+static u8 mux_div_get_parent(struct clk_hw *hw)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+ const char *name = clk_hw_get_name(hw);
-+ u32 i, div, src;
-+
-+ __mux_div_get_src_div(md, &src, &div);
-+
-+ for (i = 0; i < clk_hw_get_num_parents(hw); i++)
-+ if (src == md->parent_map[i].cfg)
-+ return i;
-+
-+ pr_err("%s: Can't find parent %d\n", name, src);
-+ return 0;
-+}
-+
-+static int mux_div_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+
-+ return __mux_div_set_src_div(md, md->parent_map[index].cfg, md->div);
-+}
-+
-+static int mux_div_set_rate(struct clk_hw *hw,
-+ unsigned long rate, unsigned long prate)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+
-+ return __mux_div_set_rate_and_parent(hw, rate, prate, md->src_sel);
-+}
-+
-+static int mux_div_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
-+ unsigned long prate, u8 index)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+
-+ return __mux_div_set_rate_and_parent(hw, rate, prate,
-+ md->parent_map[index].cfg);
-+}
-+
-+static unsigned long mux_div_recalc_rate(struct clk_hw *hw, unsigned long prate)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+ u32 div, src;
-+ int i, num_parents = clk_hw_get_num_parents(hw);
-+ const char *name = clk_hw_get_name(hw);
-+
-+ __mux_div_get_src_div(md, &src, &div);
-+ for (i = 0; i < num_parents; i++)
-+ if (src == md->parent_map[i].cfg) {
-+ struct clk_hw *p = clk_hw_get_parent_by_index(hw, i);
-+ unsigned long parent_rate = clk_hw_get_rate(p);
-+
-+ return mult_frac(parent_rate, 2, div + 1);
-+ }
-+
-+ pr_err("%s: Can't find parent %d\n", name, src);
-+ return 0;
-+}
-+
-+static struct clk_hw *mux_div_get_safe_parent(struct clk_hw *hw,
-+ unsigned long *safe_freq)
-+{
-+ int i;
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+
-+ if (md->safe_freq)
-+ *safe_freq = md->safe_freq;
-+
-+ for (i = 0; i < clk_hw_get_num_parents(hw); i++)
-+ if (md->safe_src == md->parent_map[i].cfg)
-+ break;
-+
-+ return clk_hw_get_parent_by_index(hw, i);
-+}
-+
-+static void mux_div_disable(struct clk_hw *hw)
-+{
-+ struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
-+ struct clk_hw *parent;
-+ u32 div;
-+
-+ if (!md->safe_freq || !md->safe_src)
-+ return;
-+
-+ parent = mux_div_get_safe_parent(hw, &md->safe_freq);
-+ div = divider_get_val(md->safe_freq, clk_get_rate(parent->clk), NULL,
-+ md->hid_width, CLK_DIVIDER_ROUND_CLOSEST);
-+ div = 2 * div + 1;
-+
-+ __mux_div_set_src_div(md, md->safe_src, div);
-+}
-+
-+const struct clk_ops clk_regmap_mux_div_ops = {
-+ .enable = mux_div_enable,
-+ .disable = mux_div_disable,
-+ .get_parent = mux_div_get_parent,
-+ .set_parent = mux_div_set_parent,
-+ .set_rate = mux_div_set_rate,
-+ .set_rate_and_parent = mux_div_set_rate_and_parent,
-+ .determine_rate = mux_div_determine_rate,
-+ .recalc_rate = mux_div_recalc_rate,
-+ .get_safe_parent = mux_div_get_safe_parent,
-+};
-+EXPORT_SYMBOL_GPL(clk_regmap_mux_div_ops);
---- /dev/null
-+++ b/drivers/clk/qcom/clk-regmap-mux-div.h
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright (c) 2015, Linaro Limited
-+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __QCOM_CLK_REGMAP_MUX_DIV_H__
-+#define __QCOM_CLK_REGMAP_MUX_DIV_H__
-+
-+#include <linux/clk-provider.h>
-+#include "clk-regmap.h"
-+#include "clk-rcg.h"
-+
-+/**
-+ * struct mux_div_clk - combined mux/divider clock
-+ * @reg_offset: offset of the mux/divider register
-+ * @hid_width: number of bits in half integer divider
-+ * @hid_shift: lowest bit of hid value field
-+ * @src_width: number of bits in source select
-+ * @src_shift: lowest bit of source select field
-+ * @div: the divider raw configuration value
-+ * @src_sel: the mux index which will be used if the clock is enabled
-+ * @safe_src: the safe source mux index for this clock
-+ * @safe_freq: When switching rates from A to B, the mux div clock will
-+ * instead switch from A -> safe_freq -> B. This allows the
-+ * mux_div clock to change rates while enabled, even if this
-+ * behavior is not supported by the parent clocks.
-+ * If changing the rate of parent A also causes the rate of
-+ * parent B to change, then safe_freq must be defined.
-+ * safe_freq is expected to have a source clock which is always
-+ * on and runs at only one rate.
-+ * @parent_map: pointer to parent_map struct
-+ * @clkr: handle between common and hardware-specific interfaces
-+ */
-+
-+struct clk_regmap_mux_div {
-+ u32 reg_offset;
-+ u32 hid_width;
-+ u32 hid_shift;
-+ u32 src_width;
-+ u32 src_shift;
-+ u32 div;
-+ u32 src_sel;
-+ u32 safe_src;
-+ unsigned long safe_freq;
-+ const struct parent_map *parent_map;
-+ struct clk_regmap clkr;
-+};
-+
-+#define to_clk_regmap_mux_div(_hw) \
-+ container_of(to_clk_regmap(_hw), struct clk_regmap_mux_div, clkr)
-+
-+extern const struct clk_ops clk_regmap_mux_div_ops;
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch b/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch
deleted file mode 100644
index c8d83e9e57..0000000000
--- a/target/linux/ipq806x/patches-4.4/180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From patchwork Wed Nov 2 15:56:58 2016
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v9,3/3] clk: qcom: Always add factor clock for xo clocks
-From: Georgi Djakov <georgi.djakov@linaro.org>
-X-Patchwork-Id: 9409421
-Message-Id: <20161102155658.32203-4-georgi.djakov@linaro.org>
-To: sboyd@codeaurora.org, mturquette@baylibre.com
-Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
- robh+dt@kernel.org, mark.rutland@arm.com,
- linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- georgi.djakov@linaro.org
-Date: Wed, 2 Nov 2016 17:56:58 +0200
-
-Currently the RPM/RPM-SMD clock drivers do not register the xo clocks,
-so we should always add factor clock. When we later add xo clocks support
-into the drivers, we should update this function to skip registration.
-By doing so we avoid any DT dependencies.
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/clk/qcom/common.c | 15 ++++++---------
- 1 file changed, 6 insertions(+), 9 deletions(-)
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
-
---- a/drivers/clk/qcom/common.c
-+++ b/drivers/clk/qcom/common.c
-@@ -154,15 +154,12 @@ int qcom_cc_register_board_clk(struct de
- const char *name, unsigned long rate)
- {
- bool add_factor = true;
-- struct device_node *node;
-
-- /* The RPM clock driver will add the factor clock if present */
-- if (IS_ENABLED(CONFIG_QCOM_RPMCC)) {
-- node = of_find_compatible_node(NULL, NULL, "qcom,rpmcc");
-- if (of_device_is_available(node))
-- add_factor = false;
-- of_node_put(node);
-- }
-+ /*
-+ * TODO: The RPM clock driver currently does not support the xo clock.
-+ * When xo is added to the RPM clock driver, we should change this
-+ * function to skip registration of xo factor clocks.
-+ */
-
- return _qcom_cc_register_board_clk(dev, path, name, rate, add_factor);
- }
diff --git a/target/linux/ipq806x/patches-4.4/181-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch b/target/linux/ipq806x/patches-4.4/181-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
deleted file mode 100644
index b766ec07ec..0000000000
--- a/target/linux/ipq806x/patches-4.4/181-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 252a4e72dfd7add3c37604449fd20db29d84c6f8 Mon Sep 17 00:00:00 2001
-From: Lina Iyer <lina.iyer@linaro.org>
-Date: Wed, 25 Mar 2015 14:25:29 -0600
-Subject: ARM: cpuidle: Add cpuidle support for QCOM cpus
-
-Define ARM_QCOM_CPUIDLE config item to enable cpuidle support.
-
-Cc: Stephen Boyd <sboyd@codeaurora.org>
-Cc: Arnd Bergmann <arnd@arndb.de>
-Cc: Kevin Hilman <khilman@linaro.org>
-Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
----
- drivers/cpuidle/Kconfig.arm | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/cpuidle/Kconfig.arm
-+++ b/drivers/cpuidle/Kconfig.arm
-@@ -74,3 +74,10 @@ config ARM_MVEBU_V7_CPUIDLE
- depends on ARCH_MVEBU && !ARM64
- help
- Select this to enable cpuidle on Armada 370, 38x and XP processors.
-+
-+config ARM_QCOM_CPUIDLE
-+ bool "CPU Idle Driver for QCOM processors"
-+ depends on ARCH_QCOM
-+ select ARM_CPUIDLE
-+ help
-+ Select this to enable cpuidle on QCOM processors.
diff --git a/target/linux/ipq806x/patches-4.4/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-4.4/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch
deleted file mode 100644
index 35ba6fbb22..0000000000
--- a/target/linux/ipq806x/patches-4.4/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From b12e230f09d4481424e6a5d7e2ae566b6954e83f Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Wed, 29 Apr 2015 15:21:46 -0700
-Subject: [PATCH] HACK: arch: arm: force ZRELADDR on arch-qcom
-
-ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
-on most ARM architectures. This automatically calculate ZRELADDR by
-masking PHYS_OFFSET with 0xf8000000.
-
-However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware
-network accelerators, and the bootloader removes this section from the
-layout passed from the ATAGS (when used).
-
-For newer bootloader, when DT is used, this is not a problem, we just
-reserve this memory in the device tree. But if the bootloader doesn't
-have DT support, then ATAGS have to be used. In this case, the ARM
-decompressor will position the kernel in this low mem, which will not be
-in the RAM section mapped by the bootloader, which means the kernel will
-freeze in the middle of the boot process trying to map the memory.
-
-As a work around, this patch allows disabling AUTO_ZRELADDR when
-ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
-which don't support device-tree, which is the case on certain early
-IPQ806x based designs.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/Kconfig | 2 +-
- arch/arm/Makefile | 2 ++
- arch/arm/mach-qcom/Makefile.boot | 1 +
- 3 files changed, 4 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/mach-qcom/Makefile.boot
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -324,7 +324,7 @@ config ARCH_MULTIPLATFORM
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_HAS_SG_CHAIN
- select ARM_PATCH_PHYS_VIRT
-- select AUTO_ZRELADDR
-+ select AUTO_ZRELADDR if !ARCH_QCOM
- select CLKSRC_OF
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -256,9 +256,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
- else
- MACHINE :=
- endif
-+ifeq ($(CONFIG_ARCH_QCOM),)
- ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
- MACHINE :=
- endif
-+endif
-
- machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
- platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
---- /dev/null
-+++ b/arch/arm/mach-qcom/Makefile.boot
-@@ -0,0 +1 @@
-+zreladdr-y+= 0x42208000
diff --git a/target/linux/ipq806x/patches-4.4/302-mtd-qcom-smem-rename-rootfs-ubi.patch b/target/linux/ipq806x/patches-4.4/302-mtd-qcom-smem-rename-rootfs-ubi.patch
deleted file mode 100644
index 8890a91731..0000000000
--- a/target/linux/ipq806x/patches-4.4/302-mtd-qcom-smem-rename-rootfs-ubi.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/mtd/qcom_smem_part.c
-+++ b/drivers/mtd/qcom_smem_part.c
-@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st
- m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
- m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
-
-+ /* "rootfs" conflicts with OpenWrt auto mounting */
-+ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
-+ m_part->name = "ubi";
-+
- /*
- * The last SMEM partition may have its size marked as
- * something like 0xffffffff, which means "until the end of the
diff --git a/target/linux/ipq806x/patches-4.4/303-add-saw_l2-and-sns-into-ipq8064-DT.patch b/target/linux/ipq806x/patches-4.4/303-add-saw_l2-and-sns-into-ipq8064-DT.patch
deleted file mode 100644
index f7ea6fd252..0000000000
--- a/target/linux/ipq806x/patches-4.4/303-add-saw_l2-and-sns-into-ipq8064-DT.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -50,6 +50,7 @@
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
-+ qcom,saw = <&saw_l2>;
- };
-
- qcom,l2 {
-@@ -277,17 +278,28 @@
- };
-
- saw0: regulator@2089000 {
-- compatible = "qcom,saw2";
-+ compatible = "qcom,saw2", "syscon";
- reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
- saw1: regulator@2099000 {
-- compatible = "qcom,saw2";
-+ compatible = "qcom,saw2", "syscon";
- reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
-+ saw_l2: regulator@02012000 {
-+ compatible = "qcom,saw2", "syscon";
-+ reg = <0x02012000 0x1000>;
-+ regulator;
-+ };
-+
-+ sic_non_secure: sic-non-secure@12100000 {
-+ compatible = "syscon";
-+ reg = <0x12100000 0x10000>;
-+ };
-+
- gsbi2: gsbi@12480000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <2>;
diff --git a/target/linux/ipq806x/patches-4.4/304-add-cpu-idle-state-into-ipq8064-DT.patch b/target/linux/ipq806x/patches-4.4/304-add-cpu-idle-state-into-ipq8064-DT.patch
deleted file mode 100644
index 42b37ca2c2..0000000000
--- a/target/linux/ipq806x/patches-4.4/304-add-cpu-idle-state-into-ipq8064-DT.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 3985d2c24d96f72211488fc6ebb53b032e4d0a05 Mon Sep 17 00:00:00 2001
-From: Pavel Kubelun <be.dissent@gmail.com>
-Date: Sun, 6 Nov 2016 19:02:34 +0300
-Subject: [PATCH] ipq806x: add cpu idle state into ipq8064 DT
-
-Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 16 ++++++++++++++--
- 1 file changed, 14 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -18,7 +18,7 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-- cpu@0 {
-+ cpu0: cpu@0 {
- compatible = "qcom,krait";
- enable-method = "qcom,kpss-acc-v1";
- device_type = "cpu";
-@@ -31,9 +31,10 @@
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2a>;
- voltage-tolerance = <5>;
-+ cpu-idle-states = <&CPU_SPC>;
- };
-
-- cpu@1 {
-+ cpu1: cpu@1 {
- compatible = "qcom,krait";
- enable-method = "qcom,kpss-acc-v1";
- device_type = "cpu";
-@@ -45,6 +46,7 @@
- clock-names = "cpu", "l2";
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2b>;
-+ cpu-idle-states = <&CPU_SPC>;
- };
-
- L2: l2-cache {
-@@ -56,6 +58,16 @@
- qcom,l2 {
- qcom,l2-rates = <384000000 1000000000 1200000000>;
- };
-+
-+ idle-states {
-+ CPU_SPC: spc {
-+ compatible = "qcom,idle-state-spc",
-+ "arm,idle-state";
-+ entry-latency-us = <400>;
-+ exit-latency-us = <900>;
-+ min-residency-us = <3000>;
-+ };
-+ };
- };
-
- cpu-pmu {
diff --git a/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch b/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch
deleted file mode 100644
index be45895824..0000000000
--- a/target/linux/ipq806x/patches-4.4/305-add-board-clocks-and-rpmcc-into-DT.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 6da1b6260843da455cad8180c18d020679fd4a46 Mon Sep 17 00:00:00 2001
-From: Pavel Kubelun <be.dissent@gmail.com>
-Date: Sun, 6 Nov 2016 19:07:24 +0300
-Subject: [PATCH] ipq806x: add board clocks and rpmcc into DT
-
-Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -92,6 +92,18 @@
- };
-
- clocks {
-+ cxo_board {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <25000000>;
-+ };
-+
-+ pxo_board {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <25000000>;
-+ };
-+
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
-@@ -175,6 +187,11 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-+ rpmcc: clock-controller {
-+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
-+ #clock-cells = <1>;
-+ };
-+
- regulators {
- compatible = "qcom,rpm-smb208-regulators";
-
diff --git a/target/linux/ipq806x/patches-4.4/306-add-RPM-msg-RAM-into-DT.patch b/target/linux/ipq806x/patches-4.4/306-add-RPM-msg-RAM-into-DT.patch
deleted file mode 100644
index 005f980eba..0000000000
--- a/target/linux/ipq806x/patches-4.4/306-add-RPM-msg-RAM-into-DT.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 9bf6b333d6a4d3a3ef0d3fc7ca0becd008c81820 Mon Sep 17 00:00:00 2001
-From: Pavel Kubelun <be.dissent@gmail.com>
-Date: Sun, 6 Nov 2016 19:12:46 +0300
-Subject: [PATCH] ipq806x: add RPM msg RAM into DT
-
-Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -184,6 +184,9 @@
- "err",
- "wakeup";
-
-+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-+ clock-names = "ram";
-+
- #address-cells = <1>;
- #size-cells = <0>;
-
diff --git a/target/linux/ipq806x/patches-4.4/307-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch b/target/linux/ipq806x/patches-4.4/307-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
deleted file mode 100644
index e90f4a6faa..0000000000
--- a/target/linux/ipq806x/patches-4.4/307-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From dd43e356db678a564ad2cc111962d72ba3162a38 Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Wed, 18 Nov 2015 12:38:56 +0530
-Subject: ipq806x: gcc: Added the enable regs and mask for PRNG
-
-kernel got hanged while reading from /dev/hwrng at the
-time of PRNG clock enable
-
-Change-Id: I89856c7e19e6639508e6a2774304583a3ec91172
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
----
- drivers/clk/qcom/gcc-ipq806x.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -1240,6 +1240,8 @@ static struct clk_rcg prng_src = {
- .parent_map = gcc_pxo_pll8_map,
- },
- .clkr = {
-+ .enable_reg = 0x2e80,
-+ .enable_mask = BIT(11),
- .hw.init = &(struct clk_init_data){
- .name = "prng_src",
- .parent_names = gcc_pxo_pll8,
diff --git a/target/linux/ipq806x/patches-4.4/308-soc-qcom-ipq806x-Increase-Atomic-Coherent-Pool-size.patch b/target/linux/ipq806x/patches-4.4/308-soc-qcom-ipq806x-Increase-Atomic-Coherent-Pool-size.patch
deleted file mode 100644
index 1c997ab256..0000000000
--- a/target/linux/ipq806x/patches-4.4/308-soc-qcom-ipq806x-Increase-Atomic-Coherent-Pool-size.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 689a8f1ec58a88152669d21572a1539ad34024cb Mon Sep 17 00:00:00 2001
-From: Varadarajan Narayanan <varada@codeaurora.org>
-Date: Mon, 30 Mar 2015 13:25:21 +0530
-Subject: soc: qcom: ipq806x: Increase Atomic Coherent Pool size
-
-Linux 3.14, by default allocates a 256K Atomic Coherent Pool.
-However, Linux 3.4 seems to have allocated ~1.8M for the same.
-256K doesn't seem to be enough for the WiFi driver. Hence,
-setting the size to be similar to 3.4.
-
-CRs-Fixed: 810357
-
-Change-Id: I5b98a8531dcb33aff451a943f8b83402f9d13fa7
-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
----
- arch/arm/mach-qcom/board.c | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/arch/arm/mach-qcom/board.c
-+++ b/arch/arm/mach-qcom/board.c
-@@ -12,6 +12,11 @@
-
- #include <linux/init.h>
-
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/dma-mapping.h>
-+
- #include <asm/mach/arch.h>
-
- static const char * const qcom_dt_match[] __initconst = {
-@@ -28,3 +33,19 @@ static const char * const qcom_dt_match[
- DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
- .dt_compat = qcom_dt_match,
- MACHINE_END
-+
-+
-+static int __init qcom_atomic_pool_size_set(void)
-+{
-+#define ATOMIC_DMA_COHERENT_POOL_SIZE SZ_2M
-+
-+ init_dma_coherent_pool_size(ATOMIC_DMA_COHERENT_POOL_SIZE);
-+
-+ return 0;
-+}
-+
-+/*
-+ * This should happen before atomic_pool_init(), which is a
-+ * postcore_initcall.
-+ */
-+core_initcall(qcom_atomic_pool_size_set);
diff --git a/target/linux/ipq806x/patches-4.4/309-clk-gcc-add-tsens-child-node.patch b/target/linux/ipq806x/patches-4.4/309-clk-gcc-add-tsens-child-node.patch
deleted file mode 100644
index 0eae3e7bfd..0000000000
--- a/target/linux/ipq806x/patches-4.4/309-clk-gcc-add-tsens-child-node.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 856371ca1561ca9b3280cc323ff296c7c5e1fa93 Mon Sep 17 00:00:00 2001
-From: Pavel Kubelun <be.dissent@gmail.com>
-Date: Tue, 22 Nov 2016 17:37:56 +0300
-Subject: [PATCH] ipq806x: clk: gcc: add tsens child node
-
-Thermal sensors in ipq806x are inside a Global clock controller.
-Add a child node into it to be used by the TSENS driver.
-
-Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
-
----
- drivers/clk/qcom/gcc-ipq806x.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -3109,6 +3109,7 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_matc
- static int gcc_ipq806x_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-+ struct platform_device *tsens;
- struct regmap *regmap;
- int ret;
-
-@@ -3138,6 +3139,13 @@ static int gcc_ipq806x_probe(struct plat
- regmap_write(regmap, 0x3cf8, 8);
- regmap_write(regmap, 0x3d18, 8);
-
-+ tsens = platform_device_register_data(&pdev->dev, "qcom-tsens", -1,
-+ NULL, 0);
-+ if (IS_ERR(tsens))
-+ return PTR_ERR(tsens);
-+
-+ platform_set_drvdata(pdev, tsens);
-+
- return 0;
- }
-
diff --git a/target/linux/ipq806x/patches-4.4/310-add-necessary-thermal-data.patch b/target/linux/ipq806x/patches-4.4/310-add-necessary-thermal-data.patch
deleted file mode 100644
index b2564a5407..0000000000
--- a/target/linux/ipq806x/patches-4.4/310-add-necessary-thermal-data.patch
+++ /dev/null
@@ -1,150 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -31,6 +31,9 @@
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2a>;
- voltage-tolerance = <5>;
-+ cooling-min-state = <0>;
-+ cooling-max-state = <10>;
-+ #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SPC>;
- };
-
-@@ -46,6 +49,9 @@
- clock-names = "cpu", "l2";
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2b>;
-+ cooling-min-state = <0>;
-+ cooling-max-state = <10>;
-+ #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SPC>;
- };
-
-@@ -70,6 +76,92 @@
- };
- };
-
-+ thermal-zones {
-+ cpu-thermal0 {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&gcc 5>;
-+ coefficients = <1132 0>;
-+
-+ trips {
-+ cpu_alert0: trip0 {
-+ temperature = <75000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu_crit0: trip1 {
-+ temperature = <110000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+
-+ cpu-thermal1 {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&gcc 6>;
-+ coefficients = <1132 0>;
-+
-+ trips {
-+ cpu_alert1: trip0 {
-+ temperature = <75000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu_crit1: trip1 {
-+ temperature = <110000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+
-+ cpu-thermal2 {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&gcc 7>;
-+ coefficients = <1199 0>;
-+
-+ trips {
-+ cpu_alert2: trip0 {
-+ temperature = <75000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu_crit2: trip1 {
-+ temperature = <110000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+
-+ cpu-thermal3 {
-+ polling-delay-passive = <250>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&gcc 8>;
-+ coefficients = <1132 0>;
-+
-+ trips {
-+ cpu_alert3: trip0 {
-+ temperature = <75000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu_crit3: trip1 {
-+ temperature = <110000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+ };
-+
- cpu-pmu {
- compatible = "qcom,krait-pmu";
- interrupts = <1 10 0x304>;
-@@ -172,6 +264,21 @@
- reg-names = "lpass-lpaif";
- };
-
-+ qfprom: qfprom@700000 {
-+ compatible = "qcom,qfprom", "syscon";
-+ reg = <0x00700000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ tsens_calib: calib {
-+ reg = <0x400 0x10>;
-+ };
-+ tsens_backup: backup_calib {
-+ reg = <0x410 0x10>;
-+ };
-+ };
-+
- rpm@108000 {
- compatible = "qcom,rpm-ipq8064";
- reg = <0x108000 0x1000>;
-@@ -499,8 +606,12 @@
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-ipq8064";
- reg = <0x00900000 0x4000>;
-+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-+ nvmem-cell-names = "calib", "calib_backup";
- #clock-cells = <1>;
- #reset-cells = <1>;
-+ #power-domain-cells = <1>;
-+ #thermal-sensor-cells = <1>;
- };
-
- tcsr: syscon@1a400000 {
diff --git a/target/linux/ipq806x/patches-4.4/311-add-rpmcc-for-ipq806x.patch b/target/linux/ipq806x/patches-4.4/311-add-rpmcc-for-ipq806x.patch
deleted file mode 100644
index bb9dd87dd6..0000000000
--- a/target/linux/ipq806x/patches-4.4/311-add-rpmcc-for-ipq806x.patch
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-@@ -12,6 +12,7 @@ Required properties :
-
- "qcom,rpmcc-msm8916", "qcom,rpmcc"
- "qcom,rpmcc-apq8064", "qcom,rpmcc"
-+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
-
- - #clock-cells : shall contain 1
-
---- a/drivers/clk/qcom/clk-rpm.c
-+++ b/drivers/clk/qcom/clk-rpm.c
-@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a
- DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
- DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
-
-+/* ipq806x */
-+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
-+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
-+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
-+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
-+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
-+
- static struct clk_rpm *apq8064_clks[] = {
- [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
- [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
-@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] =
- [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
- };
-
-+static struct clk_rpm *ipq806x_clks[] = {
-+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
-+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
-+ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
-+ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
-+ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
-+ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
-+ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
-+ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
-+ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
-+ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
-+ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
-+ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
-+ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
-+ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
-+ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
-+ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
-+};
-+
- static const struct rpm_clk_desc rpm_clk_apq8064 = {
- .clks = apq8064_clks,
- .num_clks = ARRAY_SIZE(apq8064_clks),
- };
-
-+static const struct rpm_clk_desc rpm_clk_ipq806x = {
-+ .clks = ipq806x_clks,
-+ .num_clks = ARRAY_SIZE(ipq806x_clks),
-+};
-+
- static const struct of_device_id rpm_clk_match_table[] = {
- { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
-+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
- { }
- };
- MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
---- a/include/dt-bindings/clock/qcom,rpmcc.h
-+++ b/include/dt-bindings/clock/qcom,rpmcc.h
-@@ -37,6 +37,10 @@
- #define RPM_SYS_FABRIC_A_CLK 19
- #define RPM_SFPB_CLK 20
- #define RPM_SFPB_A_CLK 21
-+#define RPM_NSS_FABRIC_0_CLK 22
-+#define RPM_NSS_FABRIC_0_A_CLK 23
-+#define RPM_NSS_FABRIC_1_CLK 24
-+#define RPM_NSS_FABRIC_1_A_CLK 25
-
- /* msm8916 */
- #define RPM_SMD_XO_CLK_SRC 0
diff --git a/target/linux/ipq806x/patches-4.4/315-disable-usb3-phy-suspend.patch b/target/linux/ipq806x/patches-4.4/315-disable-usb3-phy-suspend.patch
deleted file mode 100644
index 4b5d480d33..0000000000
--- a/target/linux/ipq806x/patches-4.4/315-disable-usb3-phy-suspend.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -678,6 +678,8 @@
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "core";
-
-+ syscon-tcsr = <&tcsr 0xb0 1>;
-+
- ranges;
-
- status = "disabled";
-@@ -689,6 +691,7 @@
- phys = <&hs_phy_0>, <&ss_phy_0>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
-+ snps,dis_u3_susphy_quirk;
- };
- };
-
-@@ -699,6 +702,8 @@
- clocks = <&gcc USB30_1_MASTER_CLK>;
- clock-names = "core";
-
-+ syscon-tcsr = <&tcsr 0xb0 0>;
-+
- ranges;
-
- status = "disabled";
-@@ -710,6 +715,7 @@
- phys = <&hs_phy_1>, <&ss_phy_1>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
-+ snps,dis_u3_susphy_quirk;
- };
- };
-
diff --git a/target/linux/ipq806x/patches-4.4/316-dt-add-prng-support.patch b/target/linux/ipq806x/patches-4.4/316-dt-add-prng-support.patch
deleted file mode 100644
index f2faf64f00..0000000000
--- a/target/linux/ipq806x/patches-4.4/316-dt-add-prng-support.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -336,6 +336,13 @@
- };
- };
-
-+ rng@1a500000 {
-+ compatible = "qcom,prng";
-+ reg = <0x1a500000 0x200>;
-+ clocks = <&gcc PRNG_CLK>;
-+ clock-names = "core";
-+ };
-+
- qcom_pinmux: pinmux@800000 {
- compatible = "qcom,ipq8064-pinctrl";
- reg = <0x800000 0x4000>;
diff --git a/target/linux/ipq806x/patches-4.4/400-dsa-add-qca.patch b/target/linux/ipq806x/patches-4.4/400-dsa-add-qca.patch
deleted file mode 100644
index 1cadba2009..0000000000
--- a/target/linux/ipq806x/patches-4.4/400-dsa-add-qca.patch
+++ /dev/null
@@ -1,1068 +0,0 @@
-From patchwork Fri May 29 01:42:16 2015
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [1/7] net: dsa: add new driver for ar8xxx family
-From: Mathieu Olivari <mathieu@codeaurora.org>
-X-Patchwork-Id: 477523
-X-Patchwork-Delegate: davem@davemloft.net
-Message-Id: <1432863742-18427-2-git-send-email-mathieu@codeaurora.org>
-To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
- ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
- davem@davemloft.net, mathieu@codeaurora.org, andrew@lunn.ch,
- f.fainelli@gmail.com, linux@roeck-us.net, gang.chen.5i5j@gmail.com,
- jiri@resnulli.us, leitec@staticky.com, fabf@skynet.be,
- alexander.h.duyck@intel.com, pavel.nakonechny@skitlab.ru,
- joe@perches.com, sfeldma@gmail.com, nbd@nbd.name, juhosg@openwrt.org
-Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
- netdev@vger.kernel.org
-Date: Thu, 28 May 2015 18:42:16 -0700
-
-This patch contains initial init & registration code for QCA8337. It
-will detect a QCA8337 switch, if present and declared in DT/platform.
-
-Each port will be represented through a standalone net_device interface,
-as for other DSA switches. CPU can communicate with any of the ports by
-setting an IP@ on ethN interface. Ports cannot communicate with each
-other just yet.
-
-Link status will be reported through polling, and we don't use any
-encapsulation.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- drivers/net/dsa/Kconfig | 7 ++
- drivers/net/dsa/Makefile | 1 +
- drivers/net/dsa/ar8xxx.c | 303 +++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/dsa/ar8xxx.h | 82 +++++++++++++
- net/dsa/dsa.c | 1 +
- 5 files changed, 394 insertions(+)
- create mode 100644 drivers/net/dsa/ar8xxx.c
- create mode 100644 drivers/net/dsa/ar8xxx.h
-
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -65,4 +65,13 @@ config NET_DSA_BCM_SF2
- This enables support for the Broadcom Starfighter 2 Ethernet
- switch chips.
-
-+config NET_DSA_AR8XXX
-+ tristate "Qualcomm Atheros AR8XXX Ethernet switch family support"
-+ depends on NET_DSA
-+ select NET_DSA_TAG_QCA
-+ select REGMAP
-+ ---help---
-+ This enables support for the Qualcomm Atheros AR8XXX Ethernet
-+ switch chips.
-+
- endmenu
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -14,3 +14,4 @@ ifdef CONFIG_NET_DSA_MV88E6171
- mv88e6xxx_drv-y += mv88e6171.o
- endif
- obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
-+obj-$(CONFIG_NET_DSA_AR8XXX) += ar8xxx.o
---- /dev/null
-+++ b/drivers/net/dsa/ar8xxx.c
-@@ -0,0 +1,529 @@
-+/*
-+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
-+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+#include <linux/netdevice.h>
-+#include <net/dsa.h>
-+#include <linux/phy.h>
-+#include <linux/of_net.h>
-+#include <linux/of_platform.h>
-+
-+#include "ar8xxx.h"
-+
-+#define MIB_DESC(_s, _o, _n) \
-+ { \
-+ .size = (_s), \
-+ .offset = (_o), \
-+ .name = (_n), \
-+ }
-+
-+static const struct ar8xxx_mib_desc ar8327_mib[] = {
-+ MIB_DESC(1, 0x00, "RxBroad"),
-+ MIB_DESC(1, 0x04, "RxPause"),
-+ MIB_DESC(1, 0x08, "RxMulti"),
-+ MIB_DESC(1, 0x0c, "RxFcsErr"),
-+ MIB_DESC(1, 0x10, "RxAlignErr"),
-+ MIB_DESC(1, 0x14, "RxRunt"),
-+ MIB_DESC(1, 0x18, "RxFragment"),
-+ MIB_DESC(1, 0x1c, "Rx64Byte"),
-+ MIB_DESC(1, 0x20, "Rx128Byte"),
-+ MIB_DESC(1, 0x24, "Rx256Byte"),
-+ MIB_DESC(1, 0x28, "Rx512Byte"),
-+ MIB_DESC(1, 0x2c, "Rx1024Byte"),
-+ MIB_DESC(1, 0x30, "Rx1518Byte"),
-+ MIB_DESC(1, 0x34, "RxMaxByte"),
-+ MIB_DESC(1, 0x38, "RxTooLong"),
-+ MIB_DESC(2, 0x3c, "RxGoodByte"),
-+ MIB_DESC(2, 0x44, "RxBadByte"),
-+ MIB_DESC(1, 0x4c, "RxOverFlow"),
-+ MIB_DESC(1, 0x50, "Filtered"),
-+ MIB_DESC(1, 0x54, "TxBroad"),
-+ MIB_DESC(1, 0x58, "TxPause"),
-+ MIB_DESC(1, 0x5c, "TxMulti"),
-+ MIB_DESC(1, 0x60, "TxUnderRun"),
-+ MIB_DESC(1, 0x64, "Tx64Byte"),
-+ MIB_DESC(1, 0x68, "Tx128Byte"),
-+ MIB_DESC(1, 0x6c, "Tx256Byte"),
-+ MIB_DESC(1, 0x70, "Tx512Byte"),
-+ MIB_DESC(1, 0x74, "Tx1024Byte"),
-+ MIB_DESC(1, 0x78, "Tx1518Byte"),
-+ MIB_DESC(1, 0x7c, "TxMaxByte"),
-+ MIB_DESC(1, 0x80, "TxOverSize"),
-+ MIB_DESC(2, 0x84, "TxByte"),
-+ MIB_DESC(1, 0x8c, "TxCollision"),
-+ MIB_DESC(1, 0x90, "TxAbortCol"),
-+ MIB_DESC(1, 0x94, "TxMultiCol"),
-+ MIB_DESC(1, 0x98, "TxSingleCol"),
-+ MIB_DESC(1, 0x9c, "TxExcDefer"),
-+ MIB_DESC(1, 0xa0, "TxDefer"),
-+ MIB_DESC(1, 0xa4, "TxLateCol"),
-+};
-+
-+u32
-+ar8xxx_mii_read32(struct mii_bus *bus, int phy_id, int regnum)
-+{
-+ u16 lo, hi;
-+
-+ lo = bus->read(bus, phy_id, regnum);
-+ hi = bus->read(bus, phy_id, regnum + 1);
-+
-+ return (hi << 16) | lo;
-+}
-+
-+void
-+ar8xxx_mii_write32(struct mii_bus *bus, int phy_id, int regnum, u32 val)
-+{
-+ u16 lo, hi;
-+
-+ lo = val & 0xffff;
-+ hi = (u16)(val >> 16);
-+
-+ bus->write(bus, phy_id, regnum, lo);
-+ bus->write(bus, phy_id, regnum + 1, hi);
-+}
-+
-+u32 ar8xxx_read(struct dsa_switch *ds, int reg)
-+{
-+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
-+ u16 r1, r2, page;
-+ u32 val;
-+
-+ split_addr((u32)reg, &r1, &r2, &page);
-+
-+ mutex_lock(&bus->mdio_lock);
-+
-+ bus->write(bus, 0x18, 0, page);
-+ wait_for_page_switch();
-+ val = ar8xxx_mii_read32(bus, 0x10 | r2, r1);
-+
-+ mutex_unlock(&bus->mdio_lock);
-+
-+ return val;
-+}
-+
-+void ar8xxx_write(struct dsa_switch *ds, int reg, u32 val)
-+{
-+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
-+ u16 r1, r2, page;
-+
-+ split_addr((u32)reg, &r1, &r2, &page);
-+
-+ mutex_lock(&bus->mdio_lock);
-+
-+ bus->write(bus, 0x18, 0, page);
-+ wait_for_page_switch();
-+ ar8xxx_mii_write32(bus, 0x10 | r2, r1, val);
-+
-+ mutex_unlock(&bus->mdio_lock);
-+}
-+
-+u32
-+ar8xxx_rmw(struct dsa_switch *ds, int reg, u32 mask, u32 val)
-+{
-+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
-+ u16 r1, r2, page;
-+ u32 ret;
-+
-+ split_addr((u32)reg, &r1, &r2, &page);
-+
-+ mutex_lock(&bus->mdio_lock);
-+
-+ bus->write(bus, 0x18, 0, page);
-+ wait_for_page_switch();
-+
-+ ret = ar8xxx_mii_read32(bus, 0x10 | r2, r1);
-+ ret &= ~mask;
-+ ret |= val;
-+ ar8xxx_mii_write32(bus, 0x10 | r2, r1, ret);
-+
-+ mutex_unlock(&bus->mdio_lock);
-+
-+ return ret;
-+}
-+
-+static char *ar8xxx_probe(struct device *host_dev, int sw_addr)
-+{
-+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
-+ u32 phy_id;
-+
-+ if (!bus)
-+ return NULL;
-+
-+ /* sw_addr is irrelevant as the switch occupies the MDIO bus from
-+ * addresses 0 to 4 (PHYs) and 16-23 (for MDIO 32bits protocol). So
-+ * we'll probe address 0 to see if we see the right switch family.
-+ */
-+ phy_id = mdiobus_read(bus, 0, MII_PHYSID1) << 16;
-+ phy_id |= mdiobus_read(bus, 0, MII_PHYSID2);
-+
-+ switch (phy_id) {
-+ case PHY_ID_QCA8337:
-+ return "QCA8337";
-+ default:
-+ return NULL;
-+ }
-+}
-+
-+static int ar8xxx_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
-+{
-+ struct dsa_switch *ds = (struct dsa_switch *)ctx;
-+
-+ *val = ar8xxx_read(ds, reg);
-+
-+ return 0;
-+}
-+
-+static int ar8xxx_regmap_write(void *ctx, uint32_t reg, uint32_t val)
-+{
-+ struct dsa_switch *ds = (struct dsa_switch *)ctx;
-+
-+ ar8xxx_write(ds, reg, val);
-+
-+ return 0;
-+}
-+
-+static const struct regmap_range ar8xxx_readable_ranges[] = {
-+ regmap_reg_range(0x0000, 0x00e4), /* Global control */
-+ regmap_reg_range(0x0100, 0x0168), /* EEE control */
-+ regmap_reg_range(0x0200, 0x0270), /* Parser control */
-+ regmap_reg_range(0x0400, 0x0454), /* ACL */
-+ regmap_reg_range(0x0600, 0x0718), /* Lookup */
-+ regmap_reg_range(0x0800, 0x0b70), /* QM */
-+ regmap_reg_range(0x0C00, 0x0c80), /* PKT */
-+ regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
-+ regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
-+ regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
-+ regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
-+ regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
-+ regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
-+ regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
-+
-+};
-+
-+static struct regmap_access_table ar8xxx_readable_table = {
-+ .yes_ranges = ar8xxx_readable_ranges,
-+ .n_yes_ranges = ARRAY_SIZE(ar8xxx_readable_ranges),
-+};
-+
-+struct regmap_config ar8xxx_regmap_config = {
-+ .reg_bits = 16,
-+ .val_bits = 32,
-+ .reg_stride = 4,
-+ .max_register = 0x16ac, /* end MIB - Port6 range */
-+ .reg_read = ar8xxx_regmap_read,
-+ .reg_write = ar8xxx_regmap_write,
-+ .rd_table = &ar8xxx_readable_table,
-+};
-+
-+static int ar8xxx_set_pad_ctrl(struct dsa_switch *ds, int port, int mode)
-+{
-+ int reg;
-+
-+ switch (port) {
-+ case 0:
-+ reg = AR8327_REG_PORT0_PAD_CTRL;
-+ break;
-+ case 6:
-+ reg = AR8327_REG_PORT6_PAD_CTRL;
-+ break;
-+ default:
-+ pr_err("Can't set PAD_CTRL on port %d\n", port);
-+ return -EINVAL;
-+ }
-+
-+ /* DSA only supports 1 CPU port for now, so we'll take the assumption
-+ * that P0 is connected to the CPU master_dev.
-+ */
-+ switch (mode) {
-+ case PHY_INTERFACE_MODE_RGMII:
-+ ar8xxx_write(ds, reg,
-+ AR8327_PORT_PAD_RGMII_EN |
-+ AR8327_PORT_PAD_RGMII_TX_DELAY(3) |
-+ AR8327_PORT_PAD_RGMII_RX_DELAY(3));
-+
-+ /* According to the datasheet, RGMII delay is enabled through
-+ * PORT5_PAD_CTRL for all ports, rather than individual port
-+ * registers
-+ */
-+ ar8xxx_write(ds, AR8327_REG_PORT5_PAD_CTRL,
-+ AR8327_PORT_PAD_RGMII_RX_DELAY_EN);
-+ break;
-+ case PHY_INTERFACE_MODE_SGMII:
-+ ar8xxx_write(ds, reg, AR8327_PORT_PAD_SGMII_EN);
-+ break;
-+ default:
-+ pr_err("xMII mode %d not supported\n", mode);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int ar8xxx_of_setup(struct dsa_switch *ds)
-+{
-+ struct device_node *dn = ds->pd->of_node;
-+ const char *s_phymode;
-+ int ret, mode;
-+ u32 phy_id, ctrl;
-+
-+ /* If port6-phy-mode property exists, configure it accordingly */
-+ if (!of_property_read_string(dn, "qca,port6-phy-mode", &s_phymode)) {
-+ for (mode = 0; mode < PHY_INTERFACE_MODE_MAX; mode++)
-+ if (!strcasecmp(s_phymode, phy_modes(mode)))
-+ break;
-+
-+ if (mode == PHY_INTERFACE_MODE_MAX)
-+ pr_err("Unknown phy-mode: \"%s\"\n", s_phymode);
-+
-+ ret = ar8xxx_set_pad_ctrl(ds, 6, mode);
-+ if (ret < 0)
-+ return ret;
-+ }
-+
-+ /* If a phy ID is specified for PORT6 mac, connect them together */
-+ if (!of_property_read_u32(dn, "qca,port6-phy-id", &phy_id)) {
-+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(6),
-+ AR8327_PORT_LOOKUP_MEMBER, BIT(phy_to_port(phy_id)));
-+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(phy_to_port(phy_id)),
-+ AR8327_PORT_LOOKUP_MEMBER, BIT(6));
-+
-+ /* We want the switch to be pass-through and act like a PHY on
-+ * these ports. So BC/MC/UC & IGMP frames need to be accepted
-+ */
-+ ctrl = BIT(phy_to_port(phy_id)) | BIT(6);
-+ ar8xxx_reg_set(ds, AR8327_REG_GLOBAL_FW_CTRL1,
-+ ctrl << AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S |
-+ ctrl << AR8327_GLOBAL_FW_CTRL1_BC_DP_S |
-+ ctrl << AR8327_GLOBAL_FW_CTRL1_MC_DP_S |
-+ ctrl << AR8327_GLOBAL_FW_CTRL1_UC_DP_S);
-+ }
-+
-+ return 0;
-+}
-+
-+static int ar8xxx_setup(struct dsa_switch *ds)
-+{
-+ struct ar8xxx_priv *priv = ds_to_priv(ds);
-+ struct net_device *netdev = ds->dst->pd->of_netdev;
-+ int ret, i, phy_mode;
-+
-+ /* Start by setting up the register mapping */
-+ priv->regmap = devm_regmap_init(ds->master_dev, NULL, ds,
-+ &ar8xxx_regmap_config);
-+
-+ if (IS_ERR(priv->regmap))
-+ pr_warn("regmap initialization failed");
-+
-+ /* Initialize CPU port pad mode (xMII type, delays...) */
-+ phy_mode = of_get_phy_mode(netdev->dev.parent->of_node);
-+ if (phy_mode < 0) {
-+ pr_err("Can't find phy-mode for master device\n");
-+ return phy_mode;
-+ }
-+
-+ ret = ar8xxx_set_pad_ctrl(ds, 0, phy_mode);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* Enable CPU Port */
-+ ar8xxx_reg_set(ds, AR8327_REG_GLOBAL_FW_CTRL0,
-+ AR8327_GLOBAL_FW_CTRL0_CPU_PORT_EN);
-+
-+ /* Enable MIB counters */
-+ ar8xxx_reg_set(ds, AR8327_REG_MIB, AR8327_MIB_CPU_KEEP);
-+ ar8xxx_write(ds, AR8327_REG_MODULE_EN, AR8327_MODULE_EN_MIB);
-+
-+ /* Enable QCA header mode on Port 0 */
-+ ar8xxx_write(ds, AR8327_REG_PORT_HDR_CTRL(0),
-+ AR8327_PORT_HDR_CTRL_ALL << AR8327_PORT_HDR_CTRL_TX_S |
-+ AR8327_PORT_HDR_CTRL_ALL << AR8327_PORT_HDR_CTRL_RX_S);
-+
-+ /* Disable forwarding by default on all ports */
-+ for (i = 0; i < AR8327_NUM_PORTS; i++)
-+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(i),
-+ AR8327_PORT_LOOKUP_MEMBER, 0);
-+
-+ /* Forward all unknown frames to CPU port for Linux processing */
-+ ar8xxx_write(ds, AR8327_REG_GLOBAL_FW_CTRL1,
-+ BIT(0) << AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S |
-+ BIT(0) << AR8327_GLOBAL_FW_CTRL1_BC_DP_S |
-+ BIT(0) << AR8327_GLOBAL_FW_CTRL1_MC_DP_S |
-+ BIT(0) << AR8327_GLOBAL_FW_CTRL1_UC_DP_S);
-+
-+ /* Setup connection between CPU ports & PHYs */
-+ for (i = 0; i < DSA_MAX_PORTS; i++) {
-+ /* CPU port gets connected to all PHYs in the switch */
-+ if (dsa_is_cpu_port(ds, i)) {
-+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(0),
-+ AR8327_PORT_LOOKUP_MEMBER,
-+ ds->phys_port_mask << 1);
-+ }
-+
-+ /* Invividual PHYs gets connected to CPU port only */
-+ if (ds->phys_port_mask & BIT(i)) {
-+ int phy = phy_to_port(i);
-+
-+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(phy),
-+ AR8327_PORT_LOOKUP_MEMBER, BIT(0));
-+
-+ /* Disable Auto-learning by default so the switch
-+ * doesn't try to forward the frame to another port
-+ */
-+ ar8xxx_reg_clear(ds, AR8327_PORT_LOOKUP_CTRL(phy),
-+ AR8327_PORT_LOOKUP_LEARN);
-+ }
-+ }
-+
-+ ret = ar8xxx_of_setup(ds);
-+ if (ret < 0)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int ar8xxx_set_addr(struct dsa_switch *ds, u8 *addr)
-+{
-+ return 0;
-+}
-+
-+static int ar8xxx_phy_read(struct dsa_switch *ds, int phy, int regnum)
-+{
-+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
-+
-+ return mdiobus_read(bus, phy, regnum);
-+}
-+
-+static int
-+ar8xxx_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
-+{
-+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
-+
-+ return mdiobus_write(bus, phy, regnum, val);
-+}
-+
-+static void ar8xxx_get_strings(struct dsa_switch *ds, int phy, uint8_t *data)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
-+ strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
-+ ETH_GSTRING_LEN);
-+ }
-+}
-+
-+static void ar8xxx_get_ethtool_stats(struct dsa_switch *ds, int phy,
-+ uint64_t *data)
-+{
-+ const struct ar8xxx_mib_desc *mib;
-+ uint32_t reg, i, port;
-+ u64 hi;
-+
-+ port = phy_to_port(phy);
-+
-+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
-+ mib = &ar8327_mib[i];
-+ reg = AR8327_PORT_MIB_COUNTER(port) + mib->offset;
-+
-+ data[i] = ar8xxx_read(ds, reg);
-+ if (mib->size == 2) {
-+ hi = ar8xxx_read(ds, reg + 4);
-+ data[i] |= hi << 32;
-+ }
-+ }
-+}
-+
-+static int ar8xxx_get_sset_count(struct dsa_switch *ds)
-+{
-+ return ARRAY_SIZE(ar8327_mib);
-+}
-+
-+static void ar8xxx_poll_link(struct dsa_switch *ds)
-+{
-+ int i = 0;
-+ struct net_device *dev;
-+
-+ while ((dev = ds->ports[i++]) != NULL) {
-+ u32 status;
-+ int link;
-+ int speed;
-+ int duplex;
-+
-+ status = ar8xxx_read(ds, AR8327_REG_PORT_STATUS(i));
-+ link = !!(status & AR8XXX_PORT_STATUS_LINK_UP);
-+ duplex = !!(status & AR8XXX_PORT_STATUS_DUPLEX);
-+
-+ switch (status & AR8XXX_PORT_STATUS_SPEED) {
-+ case AR8XXX_PORT_SPEED_10M:
-+ speed = 10;
-+ break;
-+ case AR8XXX_PORT_SPEED_100M:
-+ speed = 100;
-+ break;
-+ case AR8XXX_PORT_SPEED_1000M:
-+ speed = 1000;
-+ break;
-+ default:
-+ speed = 0;
-+ }
-+
-+ if (!link) {
-+ /* This poll happens every ~1s, so we don't want to
-+ * print the status every time. Only when the device
-+ * transitions from Link UP to Link DOWN
-+ */
-+ if (netif_carrier_ok(dev))
-+ netif_carrier_off(dev);
-+ continue;
-+ } else {
-+ /* Same thing here. But we detect a Link UP event */
-+ if (!netif_carrier_ok(dev))
-+ netif_carrier_on(dev);
-+ continue;
-+ }
-+ }
-+}
-+
-+static struct dsa_switch_driver ar8xxx_switch_driver = {
-+ .tag_protocol = DSA_TAG_PROTO_QCA,
-+ .priv_size = sizeof(struct ar8xxx_priv),
-+ .probe = ar8xxx_probe,
-+ .setup = ar8xxx_setup,
-+ .set_addr = ar8xxx_set_addr,
-+ .poll_link = ar8xxx_poll_link,
-+ .phy_read = ar8xxx_phy_read,
-+ .phy_write = ar8xxx_phy_write,
-+ .get_strings = ar8xxx_get_strings,
-+ .get_ethtool_stats = ar8xxx_get_ethtool_stats,
-+ .get_sset_count = ar8xxx_get_sset_count,
-+};
-+
-+static int __init ar8xxx_init(void)
-+{
-+ register_switch_driver(&ar8xxx_switch_driver);
-+ return 0;
-+}
-+module_init(ar8xxx_init);
-+
-+static void __exit ar8xxx_cleanup(void)
-+{
-+ unregister_switch_driver(&ar8xxx_switch_driver);
-+}
-+module_exit(ar8xxx_cleanup);
-+
-+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
-+MODULE_DESCRIPTION("Driver for AR8XXX ethernet switch family");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:ar8xxx");
---- /dev/null
-+++ b/drivers/net/dsa/ar8xxx.h
-@@ -0,0 +1,156 @@
-+/*
-+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
-+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __AR8XXX_H
-+#define __AR8XXX_H
-+
-+#include <linux/delay.h>
-+#include <linux/regmap.h>
-+
-+struct ar8xxx_priv {
-+ struct regmap *regmap;
-+};
-+
-+struct ar8xxx_mib_desc {
-+ unsigned int size;
-+ unsigned int offset;
-+ const char *name;
-+};
-+
-+#define AR8327_NUM_PORTS 7
-+
-+#define PHY_ID_QCA8337 0x004dd036
-+
-+#define AR8327_REG_PORT0_PAD_CTRL 0x004
-+#define AR8327_REG_PORT5_PAD_CTRL 0x008
-+#define AR8327_REG_PORT6_PAD_CTRL 0x00c
-+#define AR8327_PORT_PAD_RGMII_EN BIT(26)
-+#define AR8327_PORT_PAD_RGMII_TX_DELAY(x) ((0x8 + (x & 0x3)) << 22)
-+#define AR8327_PORT_PAD_RGMII_RX_DELAY(x) ((0x10 + (x & 0x3)) << 20)
-+#define AR8327_PORT_PAD_RGMII_RX_DELAY_EN BIT(24)
-+#define AR8327_PORT_PAD_SGMII_EN BIT(7)
-+
-+#define AR8327_REG_MODULE_EN 0x030
-+#define AR8327_MODULE_EN_MIB BIT(0)
-+#define AR8327_MODULE_EN_ACL BIT(1)
-+#define AR8327_MODULE_EN_L3 BIT(2)
-+
-+#define AR8327_REG_MIB 0x034
-+#define AR8327_MIB_CPU_KEEP BIT(20)
-+
-+#define AR8327_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
-+#define AR8XXX_PORT_STATUS_SPEED GENMASK(2, 0)
-+#define AR8XXX_PORT_STATUS_SPEED_S 0
-+#define AR8XXX_PORT_STATUS_TXMAC BIT(2)
-+#define AR8XXX_PORT_STATUS_RXMAC BIT(3)
-+#define AR8XXX_PORT_STATUS_TXFLOW BIT(4)
-+#define AR8XXX_PORT_STATUS_RXFLOW BIT(5)
-+#define AR8XXX_PORT_STATUS_DUPLEX BIT(6)
-+#define AR8XXX_PORT_STATUS_LINK_UP BIT(8)
-+#define AR8XXX_PORT_STATUS_LINK_AUTO BIT(9)
-+#define AR8XXX_PORT_STATUS_LINK_PAUSE BIT(10)
-+
-+#define AR8327_REG_PORT_HDR_CTRL(_i) (0x9c + (_i * 4))
-+#define AR8327_PORT_HDR_CTRL_RX_MASK GENMASK(3, 2)
-+#define AR8327_PORT_HDR_CTRL_RX_S 2
-+#define AR8327_PORT_HDR_CTRL_TX_MASK GENMASK(1, 0)
-+#define AR8327_PORT_HDR_CTRL_TX_S 0
-+#define AR8327_PORT_HDR_CTRL_ALL 2
-+#define AR8327_PORT_HDR_CTRL_MGMT 1
-+#define AR8327_PORT_HDR_CTRL_NONE 0
-+
-+#define AR8327_REG_GLOBAL_FW_CTRL0 0x620
-+#define AR8327_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10)
-+
-+#define AR8327_REG_GLOBAL_FW_CTRL1 0x624
-+#define AR8327_GLOBAL_FW_CTRL1_IGMP_DP_MASK GENMASK(30, 24)
-+#define AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S 24
-+#define AR8327_GLOBAL_FW_CTRL1_BC_DP_MASK GENMASK(22, 16)
-+#define AR8327_GLOBAL_FW_CTRL1_BC_DP_S 16
-+#define AR8327_GLOBAL_FW_CTRL1_MC_DP_MASK GENMASK(14, 8)
-+#define AR8327_GLOBAL_FW_CTRL1_MC_DP_S 8
-+#define AR8327_GLOBAL_FW_CTRL1_UC_DP_MASK GENMASK(6, 0)
-+#define AR8327_GLOBAL_FW_CTRL1_UC_DP_S 0
-+
-+#define AR8327_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc)
-+#define AR8327_PORT_LOOKUP_MEMBER GENMASK(6, 0)
-+#define AR8327_PORT_LOOKUP_IN_MODE GENMASK(9, 8)
-+#define AR8327_PORT_LOOKUP_IN_MODE_S 8
-+#define AR8327_PORT_LOOKUP_STATE GENMASK(18, 16)
-+#define AR8327_PORT_LOOKUP_STATE_S 16
-+#define AR8327_PORT_LOOKUP_LEARN BIT(20)
-+#define AR8327_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
-+
-+#define AR8327_PORT_MIB_COUNTER(_i) (0x1000 + (_i) * 0x100)
-+
-+/* port speed */
-+enum {
-+ AR8XXX_PORT_SPEED_10M = 0,
-+ AR8XXX_PORT_SPEED_100M = 1,
-+ AR8XXX_PORT_SPEED_1000M = 2,
-+ AR8XXX_PORT_SPEED_ERR = 3,
-+};
-+
-+static inline int port_to_phy(int port)
-+{
-+ if (port >= 1 && port <= 6)
-+ return port - 1;
-+
-+ return -1;
-+}
-+
-+static inline int phy_to_port(int phy)
-+{
-+ if (phy < 5)
-+ return phy + 1;
-+
-+ return -1;
-+}
-+
-+u32
-+ar8xxx_rmw(struct dsa_switch *ds, int reg, u32 mask, u32 val);
-+
-+static inline void
-+split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
-+{
-+ regaddr >>= 1;
-+ *r1 = regaddr & 0x1e;
-+
-+ regaddr >>= 5;
-+ *r2 = regaddr & 0x7;
-+
-+ regaddr >>= 3;
-+ *page = regaddr & 0x1ff;
-+}
-+
-+static inline void
-+wait_for_page_switch(void)
-+{
-+ udelay(5);
-+}
-+
-+static inline void
-+ar8xxx_reg_set(struct dsa_switch *ds, int reg, u32 val)
-+{
-+ ar8xxx_rmw(ds, reg, 0, val);
-+}
-+
-+static inline void
-+ar8xxx_reg_clear(struct dsa_switch *ds, int reg, u32 val)
-+{
-+ ar8xxx_rmw(ds, reg, val, 0);
-+}
-+
-+#endif /* __AR8XXX_H */
---- a/net/dsa/dsa.c
-+++ b/net/dsa/dsa.c
-@@ -285,6 +285,11 @@ static int dsa_switch_setup_one(struct d
- dst->rcv = brcm_netdev_ops.rcv;
- break;
- #endif
-+#ifdef CONFIG_NET_DSA_TAG_QCA
-+ case DSA_TAG_PROTO_QCA:
-+ dst->rcv = qca_netdev_ops.rcv;
-+ break;
-+#endif
- case DSA_TAG_PROTO_NONE:
- break;
- default:
-@@ -1041,6 +1046,7 @@ static SIMPLE_DEV_PM_OPS(dsa_pm_ops, dsa
-
- static const struct of_device_id dsa_of_match_table[] = {
- { .compatible = "brcm,bcm7445-switch-v4.0" },
-+ { .compatible = "qca,ar8xxx", },
- { .compatible = "marvell,dsa", },
- {}
- };
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -26,6 +26,7 @@ enum dsa_tag_protocol {
- DSA_TAG_PROTO_TRAILER,
- DSA_TAG_PROTO_EDSA,
- DSA_TAG_PROTO_BRCM,
-+ DSA_TAG_PROTO_QCA,
- };
-
- #define DSA_MAX_SWITCHES 4
---- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -26,6 +26,9 @@ config NET_DSA_HWMON
- via the hwmon sysfs interface and exposes the onboard sensors.
-
- # tagging formats
-+config NET_DSA_TAG_QCA
-+ bool
-+
- config NET_DSA_TAG_BRCM
- bool
-
---- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_NET_DSA) += dsa_core.o
- dsa_core-y += dsa.o slave.o
-
- # tagging formats
-+dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
- dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
- dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
- dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
---- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -78,5 +78,7 @@ extern const struct dsa_device_ops trail
- /* tag_brcm.c */
- extern const struct dsa_device_ops brcm_netdev_ops;
-
-+/* tag_qca.c */
-+extern const struct dsa_device_ops qca_netdev_ops;
-
- #endif
---- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -1182,6 +1182,11 @@ int dsa_slave_create(struct dsa_switch *
- p->xmit = brcm_netdev_ops.xmit;
- break;
- #endif
-+#ifdef CONFIG_NET_DSA_TAG_QCA
-+ case DSA_TAG_PROTO_QCA:
-+ p->xmit = qca_netdev_ops.xmit;
-+ break;
-+#endif
- default:
- p->xmit = dsa_slave_notag_xmit;
- break;
---- /dev/null
-+++ b/net/dsa/tag_qca.c
-@@ -0,0 +1,158 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/etherdevice.h>
-+#include "dsa_priv.h"
-+
-+#define QCA_HDR_LEN 2
-+#define QCA_HDR_VERSION 0x2
-+
-+#define QCA_HDR_RECV_VERSION_MASK GENMASK(15, 14)
-+#define QCA_HDR_RECV_VERSION_S 14
-+#define QCA_HDR_RECV_PRIORITY_MASK GENMASK(13, 11)
-+#define QCA_HDR_RECV_PRIORITY_S 11
-+#define QCA_HDR_RECV_TYPE_MASK GENMASK(10, 6)
-+#define QCA_HDR_RECV_TYPE_S 6
-+#define QCA_HDR_RECV_FRAME_IS_TAGGED BIT(3)
-+#define QCA_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0)
-+
-+#define QCA_HDR_XMIT_VERSION_MASK GENMASK(15, 14)
-+#define QCA_HDR_XMIT_VERSION_S 14
-+#define QCA_HDR_XMIT_PRIORITY_MASK GENMASK(13, 11)
-+#define QCA_HDR_XMIT_PRIORITY_S 11
-+#define QCA_HDR_XMIT_CONTROL_MASK GENMASK(10, 8)
-+#define QCA_HDR_XMIT_CONTROL_S 8
-+#define QCA_HDR_XMIT_FROM_CPU BIT(7)
-+#define QCA_HDR_XMIT_DP_BIT_MASK GENMASK(6, 0)
-+
-+static inline int reg_to_port(int reg)
-+{
-+ if (reg < 5)
-+ return reg + 1;
-+
-+ return -1;
-+}
-+
-+static inline int port_to_reg(int port)
-+{
-+ if (port >= 1 && port <= 6)
-+ return port - 1;
-+
-+ return -1;
-+}
-+
-+static netdev_tx_t qca_tag_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct dsa_slave_priv *p = netdev_priv(dev);
-+ u16 *phdr, hdr;
-+
-+ dev->stats.tx_packets++;
-+ dev->stats.tx_bytes += skb->len;
-+
-+ if (skb_cow_head(skb, 0) < 0)
-+ goto out_free;
-+
-+ skb_push(skb, QCA_HDR_LEN);
-+
-+ memmove(skb->data, skb->data + QCA_HDR_LEN, 2 * ETH_ALEN);
-+ phdr = (u16 *)(skb->data + 2 * ETH_ALEN);
-+
-+ /* Set the version field, and set destination port information */
-+ hdr = QCA_HDR_VERSION << QCA_HDR_XMIT_VERSION_S |
-+ QCA_HDR_XMIT_FROM_CPU |
-+ 1 << reg_to_port(p->port);
-+
-+ *phdr = htons(hdr);
-+
-+ skb->dev = p->parent->dst->master_netdev;
-+ dev_queue_xmit(skb);
-+
-+ return NETDEV_TX_OK;
-+
-+out_free:
-+ kfree_skb(skb);
-+ return NETDEV_TX_OK;
-+}
-+
-+static int qca_tag_rcv(struct sk_buff *skb, struct net_device *dev,
-+ struct packet_type *pt, struct net_device *orig_dev)
-+{
-+ struct dsa_switch_tree *dst = dev->dsa_ptr;
-+ struct dsa_switch *ds;
-+ u8 ver;
-+ int port, phy;
-+ __be16 *phdr, hdr;
-+
-+ if (unlikely(!dst))
-+ goto out_drop;
-+
-+ skb = skb_unshare(skb, GFP_ATOMIC);
-+ if (!skb)
-+ goto out;
-+
-+ if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN)))
-+ goto out_drop;
-+
-+ /* Ethernet is added by the switch between src addr and Ethertype
-+ * At this point, skb->data points to ethertype so header should be
-+ * right before
-+ */
-+ phdr = (__be16 *)(skb->data - 2);
-+ hdr = ntohs(*phdr);
-+
-+ /* Make sure the version is correct */
-+ ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S;
-+ if (unlikely(ver != QCA_HDR_VERSION))
-+ goto out_drop;
-+
-+ /* Remove QCA tag and recalculate checksum */
-+ skb_pull_rcsum(skb, QCA_HDR_LEN);
-+ memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - QCA_HDR_LEN,
-+ ETH_HLEN - QCA_HDR_LEN);
-+
-+ /* This protocol doesn't support cascading multiple switches so it's
-+ * safe to assume the switch is first in the tree
-+ */
-+ ds = dst->ds[0];
-+ if (!ds)
-+ goto out_drop;
-+
-+ /* Get source port information */
-+ port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK);
-+ phy = port_to_reg(port);
-+ if (unlikely(phy < 0) || !ds->ports[phy])
-+ goto out_drop;
-+
-+ /* Update skb & forward the frame accordingly */
-+ skb_push(skb, ETH_HLEN);
-+ skb->pkt_type = PACKET_HOST;
-+ skb->dev = ds->ports[phy];
-+ skb->protocol = eth_type_trans(skb, skb->dev);
-+
-+ skb->dev->stats.rx_packets++;
-+ skb->dev->stats.rx_bytes += skb->len;
-+
-+ netif_receive_skb(skb);
-+
-+ return 0;
-+
-+out_drop:
-+ kfree_skb(skb);
-+out:
-+ return 0;
-+}
-+
-+const struct dsa_device_ops qca_netdev_ops = {
-+ .xmit = qca_tag_xmit,
-+ .rcv = qca_tag_rcv,
-+};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/dsa/qca-ar8xxx.txt
-@@ -0,0 +1,70 @@
-+* Qualcomm Atheros AR8xxx switch family
-+
-+Required properties:
-+
-+- compatible: should be "qca,ar8xxx"
-+- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
-+- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
-+- #size-cells: must be 0
-+- #address-cells: must be 2, see dsa/dsa.txt
-+
-+Subnodes:
-+
-+The integrated switch subnode should be specified according to the binding
-+described in dsa/dsa.txt.
-+
-+Optional properties:
-+
-+- qca,port6-phy-mode: if specified, the driver will configure Port 6 in the
-+ given phy-mode. See Documentation/devicetree/bindings/net/ethernet.txt for
-+ the list of valid phy-mode.
-+
-+- qca,port6-phy-id: if specified, the driver will connect Port 6 to the PHY
-+ given as a parameter. In this case, Port6 and the corresponding PHY will be
-+ isolated from the rest of the switch. From a system perspective, they will
-+ act as a regular PHY.
-+
-+Example:
-+
-+ dsa@0 {
-+ compatible = "qca,ar8xxx";
-+ #address-cells = <2>;
-+ #size-cells = <0>;
-+
-+ dsa,ethernet = <&ethernet0>;
-+ dsa,mii-bus = <&mii_bus0>;
-+
-+ switch@0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0 0>; /* MDIO address 0, switch 0 in tree */
-+
-+ qca,port6-phy-mode = "sgmii";
-+ qca,port6-phy-id = <4>;
-+
-+ port@0 {
-+ reg = <11>;
-+ label = "cpu";
-+ };
-+
-+ port@1 {
-+ reg = <0>;
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ reg = <1>;
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ reg = <2>;
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ reg = <3>;
-+ label = "lan4";
-+ };
-+ };
-+ };
diff --git a/target/linux/ipq806x/patches-4.4/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-4.4/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
deleted file mode 100644
index 102cd76b49..0000000000
--- a/target/linux/ipq806x/patches-4.4/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From e81de9d28bd0421c236df322872e64edf4ee1852 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Mon, 11 May 2015 16:32:09 -0700
-Subject: [PATCH 7/8] ARM: dts: qcom: add mdio nodes to ap148 & db149
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 40 ++++++++++++++++++++++++++-
- arch/arm/boot/dts/qcom-ipq8064-db149.dts | 46 ++++++++++++++++++++++++++++++++
- 2 files changed, 85 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -19,8 +19,9 @@
- };
- };
-
-- alias {
-+ aliases {
- serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
- };
-
- chosen {
-@@ -65,6 +66,15 @@
- bias-bus-hold;
- };
- };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
- };
-
- gsbi@16300000 {
-@@ -160,6 +170,34 @@
-
- linux,part-probe = "qcom-smem";
- };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -16,6 +16,7 @@
-
- alias {
- serial0 = &uart2;
-+ mdio-gpio0 = &mdio0;
- };
-
- chosen {
-@@ -38,6 +39,15 @@
- bias-none;
- };
- };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
- };
-
- gsbi2: gsbi@12480000 {
-@@ -140,5 +150,44 @@
- pcie2: pci@1b900000 {
- status = "ok";
- };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+
-+ phy6: ethernet-phy@6 {
-+ device_type = "ethernet-phy";
-+ reg = <6>;
-+ };
-+
-+ phy7: ethernet-phy@7 {
-+ device_type = "ethernet-phy";
-+ reg = <7>;
-+ };
-+ };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
deleted file mode 100644
index b722dfa25f..0000000000
--- a/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
+++ /dev/null
@@ -1,216 +0,0 @@
-From cab1f4720e82f2e17eaeed9a9ad9e4f07c742977 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Mon, 11 May 2015 12:29:18 -0700
-Subject: [PATCH 8/8] ARM: dts: qcom: add gmac nodes to ipq806x platforms
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++
- arch/arm/boot/dts/qcom-ipq8064-db149.dts | 43 ++++++++++++++++
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 86 ++++++++++++++++++++++++++++++++
- 3 files changed, 160 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -75,6 +75,16 @@
- bias-disable;
- };
- };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
- };
-
- gsbi@16300000 {
-@@ -198,6 +208,31 @@
- reg = <4>;
- };
- };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -48,6 +48,14 @@
- bias-disable;
- };
- };
-+
-+ rgmii0_pins: rgmii0_pins {
-+ mux {
-+ pins = "gpio2", "gpio66";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
- };
-
- gsbi2: gsbi@12480000 {
-@@ -189,5 +197,40 @@
- reg = <7>;
- };
- };
-+
-+ gmac0: ethernet@37000000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <0>;
-+ phy-handle = <&phy4>;
-+
-+ pinctrl-0 = <&rgmii0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <1>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ phy-handle = <&phy6>;
-+ };
-+
-+ gmac3: ethernet@37600000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <3>;
-+ phy-handle = <&phy7>;
-+ };
- };
- };
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -917,6 +917,92 @@
-
- status = "disabled";
- };
-+
-+ nss_common: syscon@03000000 {
-+ compatible = "syscon";
-+ reg = <0x03000000 0x0000FFFF>;
-+ };
-+
-+ qsgmii_csr: syscon@1bb00000 {
-+ compatible = "syscon";
-+ reg = <0x1bb00000 0x000001FF>;
-+ };
-+
-+ gmac0: ethernet@37000000 {
-+ device_type = "network";
-+ compatible = "qcom,ipq806x-gmac";
-+ reg = <0x37000000 0x200000>;
-+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+
-+ qcom,nss-common = <&nss_common>;
-+ qcom,qsgmii-csr = <&qsgmii_csr>;
-+
-+ clocks = <&gcc GMAC_CORE1_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ resets = <&gcc GMAC_CORE1_RESET>;
-+ reset-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ device_type = "network";
-+ compatible = "qcom,ipq806x-gmac";
-+ reg = <0x37200000 0x200000>;
-+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+
-+ qcom,nss-common = <&nss_common>;
-+ qcom,qsgmii-csr = <&qsgmii_csr>;
-+
-+ clocks = <&gcc GMAC_CORE2_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ resets = <&gcc GMAC_CORE2_RESET>;
-+ reset-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ device_type = "network";
-+ compatible = "qcom,ipq806x-gmac";
-+ reg = <0x37400000 0x200000>;
-+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+
-+ qcom,nss-common = <&nss_common>;
-+ qcom,qsgmii-csr = <&qsgmii_csr>;
-+
-+ clocks = <&gcc GMAC_CORE3_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ resets = <&gcc GMAC_CORE3_RESET>;
-+ reset-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+
-+ gmac3: ethernet@37600000 {
-+ device_type = "network";
-+ compatible = "qcom,ipq806x-gmac";
-+ reg = <0x37600000 0x200000>;
-+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "macirq";
-+
-+ qcom,nss-common = <&nss_common>;
-+ qcom,qsgmii-csr = <&qsgmii_csr>;
-+
-+ clocks = <&gcc GMAC_CORE4_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ resets = <&gcc GMAC_CORE4_RESET>;
-+ reset-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
- };
-
- sfpb_mutex: sfpb-mutex {
diff --git a/target/linux/ipq806x/patches-4.4/709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch b/target/linux/ipq806x/patches-4.4/709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch
deleted file mode 100644
index fa78a0aeda..0000000000
--- a/target/linux/ipq806x/patches-4.4/709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 16d2871830ff3fe12a6bff582549a9264adff278 Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangi@codeaurora.org>
-Date: Tue, 10 May 2016 20:19:31 +0530
-Subject: [PATCH] spi: qup: Fix fifo and dma support for IPQ806x
-
-Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
----
- drivers/spi/spi-qup.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 52 insertions(+), 2 deletions(-)
-
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -24,6 +24,7 @@
- #include <linux/spi/spi.h>
- #include <linux/dmaengine.h>
- #include <linux/dma-mapping.h>
-+#include <linux/gpio.h>
-
- #define QUP_CONFIG 0x0000
- #define QUP_STATE 0x0004
-@@ -152,6 +153,7 @@ struct spi_qup {
- int use_dma;
- struct dma_slave_config rx_conf;
- struct dma_slave_config tx_conf;
-+ int mode;
- };
-
-
-@@ -370,7 +372,8 @@ static int spi_qup_do_pio(struct spi_mas
- return ret;
- }
-
-- spi_qup_fifo_write(qup, xfer);
-+ if (qup->mode == QUP_IO_M_MODE_FIFO)
-+ spi_qup_fifo_write(qup, xfer);
-
- return 0;
- }
-@@ -448,6 +451,7 @@ spi_qup_get_mode(struct spi_master *mast
- {
- struct spi_qup *qup = spi_master_get_devdata(master);
- u32 mode;
-+ size_t dma_align = dma_get_cache_alignment();
-
- qup->w_size = 4;
-
-@@ -458,6 +462,14 @@ spi_qup_get_mode(struct spi_master *mast
-
- qup->n_words = xfer->len / qup->w_size;
-
-+ if (!IS_ERR_OR_NULL(master->dma_rx) &&
-+ IS_ALIGNED((size_t)xfer->tx_buf, dma_align) &&
-+ IS_ALIGNED((size_t)xfer->rx_buf, dma_align) &&
-+ !is_vmalloc_addr(xfer->tx_buf) &&
-+ !is_vmalloc_addr(xfer->rx_buf) &&
-+ (xfer->len > 3*qup->in_blk_sz))
-+ qup->use_dma = 1;
-+
- if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
- mode = QUP_IO_M_MODE_FIFO;
- else
-@@ -491,7 +503,7 @@ static int spi_qup_io_config(struct spi_
- return -EIO;
- }
-
-- mode = spi_qup_get_mode(spi->master, xfer);
-+ controller->mode = mode = spi_qup_get_mode(spi->master, xfer);
- n_words = controller->n_words;
-
- if (mode == QUP_IO_M_MODE_FIFO) {
-@@ -500,6 +512,7 @@ static int spi_qup_io_config(struct spi_
- /* must be zero for FIFO */
- writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
- writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
-+ controller->use_dma = 0;
- } else if (!controller->use_dma) {
- writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
- writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
-@@ -750,6 +763,38 @@ err_tx:
- return ret;
- }
-
-+static void spi_qup_set_cs(struct spi_device *spi, bool val)
-+{
-+ struct spi_qup *controller;
-+ u32 spi_ioc;
-+ u32 spi_ioc_orig;
-+
-+ controller = spi_master_get_devdata(spi->master);
-+ spi_ioc = readl_relaxed(controller->base + SPI_IO_CONTROL);
-+ spi_ioc_orig = spi_ioc;
-+ if (!val)
-+ spi_ioc |= SPI_IO_C_FORCE_CS;
-+ else
-+ spi_ioc &= ~SPI_IO_C_FORCE_CS;
-+
-+ if (spi_ioc != spi_ioc_orig)
-+ writel_relaxed(spi_ioc, controller->base + SPI_IO_CONTROL);
-+}
-+
-+static int spi_qup_setup(struct spi_device *spi)
-+{
-+ if (spi->cs_gpio >= 0) {
-+ if (spi->mode & SPI_CS_HIGH)
-+ gpio_set_value(spi->cs_gpio, 0);
-+ else
-+ gpio_set_value(spi->cs_gpio, 1);
-+
-+ udelay(10);
-+ }
-+
-+ return 0;
-+}
-+
- static int spi_qup_probe(struct platform_device *pdev)
- {
- struct spi_master *master;
-@@ -846,6 +891,11 @@ static int spi_qup_probe(struct platform
- if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1"))
- controller->qup_v1 = 1;
-
-+ if (!controller->qup_v1)
-+ master->set_cs = spi_qup_set_cs;
-+ else
-+ master->setup = spi_qup_setup;
-+
- spin_lock_init(&controller->lock);
- init_completion(&controller->done);
-
diff --git a/target/linux/ipq806x/patches-4.4/710-spi-qup-Make-sure-mode-is-only-determined-once.patch b/target/linux/ipq806x/patches-4.4/710-spi-qup-Make-sure-mode-is-only-determined-once.patch
deleted file mode 100644
index 338c3a0c2b..0000000000
--- a/target/linux/ipq806x/patches-4.4/710-spi-qup-Make-sure-mode-is-only-determined-once.patch
+++ /dev/null
@@ -1,220 +0,0 @@
-From 93f99afbc534e00d72d58336061823055ee820f1 Mon Sep 17 00:00:00 2001
-From: Andy Gross <andy.gross@linaro.org>
-Date: Tue, 12 Apr 2016 09:11:47 -0500
-Subject: [PATCH] spi: qup: Make sure mode is only determined once
-
-This patch calculates the mode once. All decisions on the current
-transaction
-is made using the mode instead of use_dma
-
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
-Change-Id: If3cdd924355e037d77dc8201a72895fac0461aa5
----
- drivers/spi/spi-qup.c | 96 +++++++++++++++++++--------------------------------
- 1 file changed, 36 insertions(+), 60 deletions(-)
-
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -150,13 +150,20 @@ struct spi_qup {
- int rx_bytes;
- int qup_v1;
-
-- int use_dma;
-+ int mode;
- struct dma_slave_config rx_conf;
- struct dma_slave_config tx_conf;
-- int mode;
- };
-
-
-+static inline bool spi_qup_is_dma_xfer(int mode)
-+{
-+ if (mode == QUP_IO_M_MODE_DMOV || mode == QUP_IO_M_MODE_BAM)
-+ return true;
-+
-+ return false;
-+}
-+
- static inline bool spi_qup_is_valid_state(struct spi_qup *controller)
- {
- u32 opstate = readl_relaxed(controller->base + QUP_STATE);
-@@ -427,7 +434,7 @@ static irqreturn_t spi_qup_qup_irq(int i
- error = -EIO;
- }
-
-- if (!controller->use_dma) {
-+ if (!spi_qup_is_dma_xfer(controller->mode)) {
- if (opflags & QUP_OP_IN_SERVICE_FLAG)
- spi_qup_fifo_read(controller, xfer);
-
-@@ -446,43 +453,11 @@ static irqreturn_t spi_qup_qup_irq(int i
- return IRQ_HANDLED;
- }
-
--static u32
--spi_qup_get_mode(struct spi_master *master, struct spi_transfer *xfer)
--{
-- struct spi_qup *qup = spi_master_get_devdata(master);
-- u32 mode;
-- size_t dma_align = dma_get_cache_alignment();
--
-- qup->w_size = 4;
--
-- if (xfer->bits_per_word <= 8)
-- qup->w_size = 1;
-- else if (xfer->bits_per_word <= 16)
-- qup->w_size = 2;
--
-- qup->n_words = xfer->len / qup->w_size;
--
-- if (!IS_ERR_OR_NULL(master->dma_rx) &&
-- IS_ALIGNED((size_t)xfer->tx_buf, dma_align) &&
-- IS_ALIGNED((size_t)xfer->rx_buf, dma_align) &&
-- !is_vmalloc_addr(xfer->tx_buf) &&
-- !is_vmalloc_addr(xfer->rx_buf) &&
-- (xfer->len > 3*qup->in_blk_sz))
-- qup->use_dma = 1;
--
-- if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
-- mode = QUP_IO_M_MODE_FIFO;
-- else
-- mode = QUP_IO_M_MODE_BLOCK;
--
-- return mode;
--}
--
- /* set clock freq ... bits per word */
- static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
- {
- struct spi_qup *controller = spi_master_get_devdata(spi->master);
-- u32 config, iomode, mode, control;
-+ u32 config, iomode, control;
- int ret, n_words;
-
- if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
-@@ -503,24 +478,22 @@ static int spi_qup_io_config(struct spi_
- return -EIO;
- }
-
-- controller->mode = mode = spi_qup_get_mode(spi->master, xfer);
-+ controller->w_size = DIV_ROUND_UP(xfer->bits_per_word, 8);
-+ controller->n_words = xfer->len / controller->w_size;
- n_words = controller->n_words;
-
-- if (mode == QUP_IO_M_MODE_FIFO) {
-+ if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
-+ controller->mode = QUP_IO_M_MODE_FIFO;
- writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
- writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
- /* must be zero for FIFO */
- writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
- writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
- controller->use_dma = 0;
-- } else if (!controller->use_dma) {
-- writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
-- writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
-- /* must be zero for BLOCK and BAM */
-- writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
-- writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
-- } else {
-- mode = QUP_IO_M_MODE_BAM;
-+ } else if (spi->master->can_dma &&
-+ spi->master->can_dma(spi->master, spi, xfer) &&
-+ spi->master->cur_msg_mapped) {
-+ controller->mode = QUP_IO_M_MODE_BAM;
- writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
- writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
-
-@@ -541,19 +514,26 @@ static int spi_qup_io_config(struct spi_
-
- writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
- }
-+ } else {
-+ controller->mode = QUP_IO_M_MODE_BLOCK;
-+ writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
-+ writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
-+ /* must be zero for BLOCK and BAM */
-+ writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
-+ writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
- }
-
- iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
- /* Set input and output transfer mode */
- iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
-
-- if (!controller->use_dma)
-+ if (!spi_qup_is_dma_xfer(controller->mode))
- iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
- else
- iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN;
-
-- iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
-- iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
-+ iomode |= (controller->mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
-+ iomode |= (controller->mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
-
- writel_relaxed(iomode, controller->base + QUP_IO_M_MODES);
-
-@@ -594,7 +574,7 @@ static int spi_qup_io_config(struct spi_
- config |= xfer->bits_per_word - 1;
- config |= QUP_CONFIG_SPI_MODE;
-
-- if (controller->use_dma) {
-+ if (spi_qup_is_dma_xfer(controller->mode)) {
- if (!xfer->tx_buf)
- config |= QUP_CONFIG_NO_OUTPUT;
- if (!xfer->rx_buf)
-@@ -612,7 +592,7 @@ static int spi_qup_io_config(struct spi_
- * status change in BAM mode
- */
-
-- if (mode == QUP_IO_M_MODE_BAM)
-+ if (spi_qup_is_dma_xfer(controller->mode))
- mask = QUP_OP_IN_SERVICE_FLAG | QUP_OP_OUT_SERVICE_FLAG;
-
- writel_relaxed(mask, controller->base + QUP_OPERATIONAL_MASK);
-@@ -646,7 +626,7 @@ static int spi_qup_transfer_one(struct s
- controller->tx_bytes = 0;
- spin_unlock_irqrestore(&controller->lock, flags);
-
-- if (controller->use_dma)
-+ if (spi_qup_is_dma_xfer(controller->mode))
- ret = spi_qup_do_dma(master, xfer);
- else
- ret = spi_qup_do_pio(master, xfer);
-@@ -670,7 +650,7 @@ exit:
- ret = controller->error;
- spin_unlock_irqrestore(&controller->lock, flags);
-
-- if (ret && controller->use_dma)
-+ if (ret && spi_qup_is_dma_xfer(controller->mode))
- spi_qup_dma_terminate(master, xfer);
-
- return ret;
-@@ -681,9 +661,7 @@ static bool spi_qup_can_dma(struct spi_m
- {
- struct spi_qup *qup = spi_master_get_devdata(master);
- size_t dma_align = dma_get_cache_alignment();
-- u32 mode;
--
-- qup->use_dma = 0;
-+ int n_words;
-
- if (xfer->rx_buf && (xfer->len % qup->in_blk_sz ||
- IS_ERR_OR_NULL(master->dma_rx) ||
-@@ -695,12 +673,10 @@ static bool spi_qup_can_dma(struct spi_m
- !IS_ALIGNED((size_t)xfer->tx_buf, dma_align)))
- return false;
-
-- mode = spi_qup_get_mode(master, xfer);
-- if (mode == QUP_IO_M_MODE_FIFO)
-+ n_words = xfer->len / DIV_ROUND_UP(xfer->bits_per_word, 8);
-+ if (n_words <= (qup->in_fifo_sz / sizeof(u32)))
- return false;
-
-- qup->use_dma = 1;
--
- return true;
- }
-
diff --git a/target/linux/ipq806x/patches-4.4/711-spi-qup-Fix-transaction-done-signaling.patch b/target/linux/ipq806x/patches-4.4/711-spi-qup-Fix-transaction-done-signaling.patch
deleted file mode 100644
index 99f455ef3c..0000000000
--- a/target/linux/ipq806x/patches-4.4/711-spi-qup-Fix-transaction-done-signaling.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 8e830bd17e945e74964a5b61353d74e34c0791cd Mon Sep 17 00:00:00 2001
-From: Andy Gross <andy.gross@linaro.org>
-Date: Fri, 29 Jan 2016 22:06:50 -0600
-Subject: [PATCH] spi: qup: Fix transaction done signaling
-
-Wait to signal done until we get all of the interrupts we are expecting
-to get for a transaction. If we don't wait for the input done flag, we
-can be inbetween transactions when the done flag comes in and this can
-mess up the next transaction.
-
-Change-Id: I08d78376e71590663158d6434a3fb7c0623264c9
-CC: Grant Grundler <grundler@chromium.org>
-CC: Sarthak Kukreti <skukreti@codeaurora.org>
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
----
- drivers/spi/spi-qup.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -447,7 +447,8 @@ static irqreturn_t spi_qup_qup_irq(int i
- controller->xfer = xfer;
- spin_unlock_irqrestore(&controller->lock, flags);
-
-- if (controller->rx_bytes == xfer->len || error)
-+ if ((controller->rx_bytes == xfer->len &&
-+ (opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) || error)
- complete(&controller->done);
-
- return IRQ_HANDLED;
diff --git a/target/linux/ipq806x/patches-4.4/711-stmmac-fix-ipq806x-DMA-configuration.patch b/target/linux/ipq806x/patches-4.4/711-stmmac-fix-ipq806x-DMA-configuration.patch
deleted file mode 100644
index 58400314c7..0000000000
--- a/target/linux/ipq806x/patches-4.4/711-stmmac-fix-ipq806x-DMA-configuration.patch
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-@@ -259,6 +259,7 @@ static int ipq806x_gmac_probe(struct pla
- {
- struct plat_stmmacenet_data *plat_dat;
- struct stmmac_resources stmmac_res;
-+ struct stmmac_dma_cfg *dma_cfg;
- struct device *dev = &pdev->dev;
- struct ipq806x_gmac *gmac;
- int val;
-@@ -348,6 +349,17 @@ static int ipq806x_gmac_probe(struct pla
- plat_dat->bsp_priv = gmac;
- plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
-
-+ dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
-+ GFP_KERNEL);
-+
-+ dma_cfg->pbl = 32;
-+ dma_cfg->aal = 1;
-+ dma_cfg->burst_len = DMA_AXI_BLEN_16 |
-+ (7 << DMA_AXI_RD_OSR_LMT_SHIFT) |
-+ (7 << DMA_AXI_WR_OSR_LMT_SHIFT);
-+
-+ plat_dat->dma_cfg = dma_cfg;
-+
- return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
- }
-
---- a/include/linux/stmmac.h
-+++ b/include/linux/stmmac.h
-@@ -73,6 +73,9 @@
- | DMA_AXI_BLEN_32 | DMA_AXI_BLEN_64 \
- | DMA_AXI_BLEN_128 | DMA_AXI_BLEN_256)
-
-+#define DMA_AXI_RD_OSR_LMT_SHIFT 16
-+#define DMA_AXI_WR_OSR_LMT_SHIFT 20
-+
- /* Platfrom data for platform device structure's platform_data field */
-
- struct stmmac_mdio_bus_data {
-@@ -88,6 +91,7 @@ struct stmmac_mdio_bus_data {
-
- struct stmmac_dma_cfg {
- int pbl;
-+ int aal;
- int fixed_burst;
- int mixed_burst;
- int burst_len;
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
-@@ -31,7 +31,8 @@
- #include "dwmac_dma.h"
-
- static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
-- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
-+ int burst_len, u32 dma_tx, u32 dma_rx, int atds,
-+ int aal)
- {
- u32 value = readl(ioaddr + DMA_BUS_MODE);
- int limit;
-@@ -62,6 +63,10 @@ static int dwmac1000_dma_init(void __iom
- value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
- (pbl << DMA_BUS_MODE_RPBL_SHIFT));
-
-+ /* Address Aligned Beats */
-+ if (aal)
-+ value |= DMA_BUS_MODE_AAL;
-+
- /* Set the Fixed burst mode */
- if (fb)
- value |= DMA_BUS_MODE_FB;
---- a/drivers/net/ethernet/stmicro/stmmac/common.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
-@@ -352,7 +352,7 @@ extern const struct stmmac_desc_ops ndes
- struct stmmac_dma_ops {
- /* DMA core initialization */
- int (*init) (void __iomem *ioaddr, int pbl, int fb, int mb,
-- int burst_len, u32 dma_tx, u32 dma_rx, int atds);
-+ int burst_len, u32 dma_tx, u32 dma_rx, int atds, int aal);
- /* Dump DMA registers */
- void (*dump_regs) (void __iomem *ioaddr);
- /* Set tx/rx threshold in the csr6 register
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
-@@ -33,7 +33,8 @@
- #include "dwmac_dma.h"
-
- static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
-- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
-+ int burst_len, u32 dma_tx, u32 dma_rx, int atds,
-+ int aal)
- {
- u32 value = readl(ioaddr + DMA_BUS_MODE);
- int limit;
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -1641,9 +1641,11 @@ static int stmmac_init_dma_engine(struct
- int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0;
- int mixed_burst = 0;
- int atds = 0;
-+ int aal = 0;
-
- if (priv->plat->dma_cfg) {
- pbl = priv->plat->dma_cfg->pbl;
-+ aal = priv->plat->dma_cfg->aal;
- fixed_burst = priv->plat->dma_cfg->fixed_burst;
- mixed_burst = priv->plat->dma_cfg->mixed_burst;
- burst_len = priv->plat->dma_cfg->burst_len;
-@@ -1654,7 +1656,7 @@ static int stmmac_init_dma_engine(struct
-
- return priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
- burst_len, priv->dma_tx_phy,
-- priv->dma_rx_phy, atds);
-+ priv->dma_rx_phy, atds, aal);
- }
-
- /**
diff --git a/target/linux/ipq806x/patches-4.4/712-spi-qup-Fix-DMA-mode-to-work-correctly.patch b/target/linux/ipq806x/patches-4.4/712-spi-qup-Fix-DMA-mode-to-work-correctly.patch
deleted file mode 100644
index 9c7bbeabda..0000000000
--- a/target/linux/ipq806x/patches-4.4/712-spi-qup-Fix-DMA-mode-to-work-correctly.patch
+++ /dev/null
@@ -1,221 +0,0 @@
-From ed56e6322b067a898a25bda1774eb1180a832246 Mon Sep 17 00:00:00 2001
-From: Andy Gross <andy.gross@linaro.org>
-Date: Tue, 2 Feb 2016 17:00:53 -0600
-Subject: [PATCH] spi: qup: Fix DMA mode to work correctly
-
-This patch fixes a few issues with the DMA mode. The QUP needs to be
-placed in the run mode before the DMA transactions are executed. The
-conditions for being able to DMA vary between revisions of the QUP.
-This is due to v1.1.1 using ADM DMA and later revisions using BAM.
-
-Change-Id: Ib1f876eaa05d079e0bca4358d2b25b2940986089
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
----
- drivers/spi/spi-qup.c | 95 ++++++++++++++++++++++++++++++++++-----------------
- 1 file changed, 63 insertions(+), 32 deletions(-)
-
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -143,6 +143,7 @@ struct spi_qup {
-
- struct spi_transfer *xfer;
- struct completion done;
-+ struct completion dma_tx_done;
- int error;
- int w_size; /* bytes per SPI word */
- int n_words;
-@@ -285,16 +286,16 @@ static void spi_qup_fifo_write(struct sp
-
- static void spi_qup_dma_done(void *data)
- {
-- struct spi_qup *qup = data;
-+ struct completion *done = data;
-
-- complete(&qup->done);
-+ complete(done);
- }
-
- static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
- enum dma_transfer_direction dir,
-- dma_async_tx_callback callback)
-+ dma_async_tx_callback callback,
-+ void *data)
- {
-- struct spi_qup *qup = spi_master_get_devdata(master);
- unsigned long flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE;
- struct dma_async_tx_descriptor *desc;
- struct scatterlist *sgl;
-@@ -313,11 +314,11 @@ static int spi_qup_prep_sg(struct spi_ma
- }
-
- desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags);
-- if (!desc)
-- return -EINVAL;
-+ if (IS_ERR_OR_NULL(desc))
-+ return desc ? PTR_ERR(desc) : -EINVAL;
-
- desc->callback = callback;
-- desc->callback_param = qup;
-+ desc->callback_param = data;
-
- cookie = dmaengine_submit(desc);
-
-@@ -333,18 +334,29 @@ static void spi_qup_dma_terminate(struct
- dmaengine_terminate_all(master->dma_rx);
- }
-
--static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer)
-+static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer,
-+unsigned long timeout)
- {
-+ struct spi_qup *qup = spi_master_get_devdata(master);
- dma_async_tx_callback rx_done = NULL, tx_done = NULL;
- int ret;
-
-+ /* before issuing the descriptors, set the QUP to run */
-+ ret = spi_qup_set_state(qup, QUP_STATE_RUN);
-+ if (ret) {
-+ dev_warn(qup->dev, "cannot set RUN state\n");
-+ return ret;
-+ }
-+
- if (xfer->rx_buf)
- rx_done = spi_qup_dma_done;
-- else if (xfer->tx_buf)
-+
-+ if (xfer->tx_buf)
- tx_done = spi_qup_dma_done;
-
- if (xfer->rx_buf) {
-- ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM, rx_done);
-+ ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM, rx_done,
-+ &qup->done);
- if (ret)
- return ret;
-
-@@ -352,17 +364,26 @@ static int spi_qup_do_dma(struct spi_mas
- }
-
- if (xfer->tx_buf) {
-- ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV, tx_done);
-+ ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV, tx_done,
-+ &qup->dma_tx_done);
- if (ret)
- return ret;
-
- dma_async_issue_pending(master->dma_tx);
- }
-
-- return 0;
-+ if (xfer->rx_buf && !wait_for_completion_timeout(&qup->done, timeout))
-+ return -ETIMEDOUT;
-+
-+ if (xfer->tx_buf &&
-+ !wait_for_completion_timeout(&qup->dma_tx_done, timeout))
-+ ret = -ETIMEDOUT;
-+
-+ return ret;
- }
-
--static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer)
-+static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer,
-+ unsigned long timeout)
- {
- struct spi_qup *qup = spi_master_get_devdata(master);
- int ret;
-@@ -382,6 +403,15 @@ static int spi_qup_do_pio(struct spi_mas
- if (qup->mode == QUP_IO_M_MODE_FIFO)
- spi_qup_fifo_write(qup, xfer);
-
-+ ret = spi_qup_set_state(qup, QUP_STATE_RUN);
-+ if (ret) {
-+ dev_warn(qup->dev, "cannot set RUN state\n");
-+ return ret;
-+ }
-+
-+ if (!wait_for_completion_timeout(&qup->done, timeout))
-+ return -ETIMEDOUT;
-+
- return 0;
- }
-
-@@ -430,7 +460,6 @@ static irqreturn_t spi_qup_qup_irq(int i
- dev_warn(controller->dev, "CLK_OVER_RUN\n");
- if (spi_err & SPI_ERROR_CLK_UNDER_RUN)
- dev_warn(controller->dev, "CLK_UNDER_RUN\n");
--
- error = -EIO;
- }
-
-@@ -619,6 +648,7 @@ static int spi_qup_transfer_one(struct s
- timeout = 100 * msecs_to_jiffies(timeout);
-
- reinit_completion(&controller->done);
-+ reinit_completion(&controller->dma_tx_done);
-
- spin_lock_irqsave(&controller->lock, flags);
- controller->xfer = xfer;
-@@ -628,21 +658,13 @@ static int spi_qup_transfer_one(struct s
- spin_unlock_irqrestore(&controller->lock, flags);
-
- if (spi_qup_is_dma_xfer(controller->mode))
-- ret = spi_qup_do_dma(master, xfer);
-+ ret = spi_qup_do_dma(master, xfer, timeout);
- else
-- ret = spi_qup_do_pio(master, xfer);
-+ ret = spi_qup_do_pio(master, xfer, timeout);
-
- if (ret)
- goto exit;
-
-- if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
-- dev_warn(controller->dev, "cannot set EXECUTE state\n");
-- goto exit;
-- }
--
-- if (!wait_for_completion_timeout(&controller->done, timeout))
-- ret = -ETIMEDOUT;
--
- exit:
- spi_qup_set_state(controller, QUP_STATE_RESET);
- spin_lock_irqsave(&controller->lock, flags);
-@@ -664,15 +686,23 @@ static bool spi_qup_can_dma(struct spi_m
- size_t dma_align = dma_get_cache_alignment();
- int n_words;
-
-- if (xfer->rx_buf && (xfer->len % qup->in_blk_sz ||
-- IS_ERR_OR_NULL(master->dma_rx) ||
-- !IS_ALIGNED((size_t)xfer->rx_buf, dma_align)))
-- return false;
-+ if (xfer->rx_buf) {
-+ if (!IS_ALIGNED((size_t)xfer->rx_buf, dma_align) ||
-+ IS_ERR_OR_NULL(master->dma_rx))
-+ return false;
-
-- if (xfer->tx_buf && (xfer->len % qup->out_blk_sz ||
-- IS_ERR_OR_NULL(master->dma_tx) ||
-- !IS_ALIGNED((size_t)xfer->tx_buf, dma_align)))
-- return false;
-+ if (qup->qup_v1 && (xfer->len % qup->in_blk_sz))
-+ return false;
-+ }
-+
-+ if (xfer->tx_buf) {
-+ if (!IS_ALIGNED((size_t)xfer->tx_buf, dma_align) ||
-+ IS_ERR_OR_NULL(master->dma_tx))
-+ return false;
-+
-+ if (qup->qup_v1 && (xfer->len % qup->out_blk_sz))
-+ return false;
-+ }
-
- n_words = xfer->len / DIV_ROUND_UP(xfer->bits_per_word, 8);
- if (n_words <= (qup->in_fifo_sz / sizeof(u32)))
-@@ -875,6 +905,7 @@ static int spi_qup_probe(struct platform
-
- spin_lock_init(&controller->lock);
- init_completion(&controller->done);
-+ init_completion(&controller->dma_tx_done);
-
- iomode = readl_relaxed(base + QUP_IO_M_MODES);
-
diff --git a/target/linux/ipq806x/patches-4.4/713-spi-qup-Fix-block-mode-to-work-correctly.patch b/target/linux/ipq806x/patches-4.4/713-spi-qup-Fix-block-mode-to-work-correctly.patch
deleted file mode 100644
index eb0b45cd1c..0000000000
--- a/target/linux/ipq806x/patches-4.4/713-spi-qup-Fix-block-mode-to-work-correctly.patch
+++ /dev/null
@@ -1,312 +0,0 @@
-From 148f77310a9ddf4db5036066458d7aed92cea9ae Mon Sep 17 00:00:00 2001
-From: Andy Gross <andy.gross@linaro.org>
-Date: Sun, 31 Jan 2016 21:28:13 -0600
-Subject: [PATCH] spi: qup: Fix block mode to work correctly
-
-This patch corrects the behavior of the BLOCK
-transactions. During block transactions, the controller
-must be read/written to in block size transactions.
-
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
-Change-Id: I4b4f4d25be57e6e8148f6f0d24bed376eb287ecf
----
- drivers/spi/spi-qup.c | 181 +++++++++++++++++++++++++++++++++++++++-----------
- 1 file changed, 141 insertions(+), 40 deletions(-)
-
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -83,6 +83,8 @@
- #define QUP_IO_M_MODE_BAM 3
-
- /* QUP_OPERATIONAL fields */
-+#define QUP_OP_IN_BLOCK_READ_REQ BIT(13)
-+#define QUP_OP_OUT_BLOCK_WRITE_REQ BIT(12)
- #define QUP_OP_MAX_INPUT_DONE_FLAG BIT(11)
- #define QUP_OP_MAX_OUTPUT_DONE_FLAG BIT(10)
- #define QUP_OP_IN_SERVICE_FLAG BIT(9)
-@@ -156,6 +158,12 @@ struct spi_qup {
- struct dma_slave_config tx_conf;
- };
-
-+static inline bool spi_qup_is_flag_set(struct spi_qup *controller, u32 flag)
-+{
-+ u32 opflag = readl_relaxed(controller->base + QUP_OPERATIONAL);
-+
-+ return opflag & flag;
-+}
-
- static inline bool spi_qup_is_dma_xfer(int mode)
- {
-@@ -217,29 +225,26 @@ static int spi_qup_set_state(struct spi_
- return 0;
- }
-
--static void spi_qup_fifo_read(struct spi_qup *controller,
-- struct spi_transfer *xfer)
-+static void spi_qup_read_from_fifo(struct spi_qup *controller,
-+ struct spi_transfer *xfer, u32 num_words)
- {
- u8 *rx_buf = xfer->rx_buf;
-- u32 word, state;
-- int idx, shift, w_size;
--
-- w_size = controller->w_size;
-+ int i, shift, num_bytes;
-+ u32 word;
-
-- while (controller->rx_bytes < xfer->len) {
--
-- state = readl_relaxed(controller->base + QUP_OPERATIONAL);
-- if (0 == (state & QUP_OP_IN_FIFO_NOT_EMPTY))
-- break;
-+ for (; num_words; num_words--) {
-
- word = readl_relaxed(controller->base + QUP_INPUT_FIFO);
-
-+ num_bytes = min_t(int, xfer->len - controller->rx_bytes,
-+ controller->w_size);
-+
- if (!rx_buf) {
-- controller->rx_bytes += w_size;
-+ controller->rx_bytes += num_bytes;
- continue;
- }
-
-- for (idx = 0; idx < w_size; idx++, controller->rx_bytes++) {
-+ for (i = 0; i < num_bytes; i++, controller->rx_bytes++) {
- /*
- * The data format depends on bytes per SPI word:
- * 4 bytes: 0x12345678
-@@ -247,38 +252,80 @@ static void spi_qup_fifo_read(struct spi
- * 1 byte : 0x00000012
- */
- shift = BITS_PER_BYTE;
-- shift *= (w_size - idx - 1);
-+ shift *= (controller->w_size - i - 1);
- rx_buf[controller->rx_bytes] = word >> shift;
- }
- }
- }
-
--static void spi_qup_fifo_write(struct spi_qup *controller,
-+static void spi_qup_read(struct spi_qup *controller,
- struct spi_transfer *xfer)
- {
-- const u8 *tx_buf = xfer->tx_buf;
-- u32 word, state, data;
-- int idx, w_size;
-+ u32 remainder, words_per_block, num_words;
-+ bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
-+
-+ remainder = DIV_ROUND_UP(xfer->len - controller->rx_bytes,
-+ controller->w_size);
-+ words_per_block = controller->in_blk_sz >> 2;
-+
-+ do {
-+ /* ACK by clearing service flag */
-+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
-+ controller->base + QUP_OPERATIONAL);
-+
-+ if (is_block_mode) {
-+ num_words = (remainder > words_per_block) ?
-+ words_per_block : remainder;
-+ } else {
-+ if (!spi_qup_is_flag_set(controller,
-+ QUP_OP_IN_FIFO_NOT_EMPTY))
-+ break;
-
-- w_size = controller->w_size;
-+ num_words = 1;
-+ }
-+
-+ /* read up to the maximum transfer size available */
-+ spi_qup_read_from_fifo(controller, xfer, num_words);
-
-- while (controller->tx_bytes < xfer->len) {
-+ remainder -= num_words;
-
-- state = readl_relaxed(controller->base + QUP_OPERATIONAL);
-- if (state & QUP_OP_OUT_FIFO_FULL)
-+ /* if block mode, check to see if next block is available */
-+ if (is_block_mode && !spi_qup_is_flag_set(controller,
-+ QUP_OP_IN_BLOCK_READ_REQ))
- break;
-
-+ } while (remainder);
-+
-+ /*
-+ * Due to extra stickiness of the QUP_OP_IN_SERVICE_FLAG during block
-+ * mode reads, it has to be cleared again at the very end
-+ */
-+ if (is_block_mode && spi_qup_is_flag_set(controller,
-+ QUP_OP_MAX_INPUT_DONE_FLAG))
-+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
-+ controller->base + QUP_OPERATIONAL);
-+
-+}
-+
-+static void spi_qup_write_to_fifo(struct spi_qup *controller,
-+ struct spi_transfer *xfer, u32 num_words)
-+{
-+ const u8 *tx_buf = xfer->tx_buf;
-+ int i, num_bytes;
-+ u32 word, data;
-+
-+ for (; num_words; num_words--) {
- word = 0;
-- for (idx = 0; idx < w_size; idx++, controller->tx_bytes++) {
-
-- if (!tx_buf) {
-- controller->tx_bytes += w_size;
-- break;
-+ num_bytes = min_t(int, xfer->len - controller->tx_bytes,
-+ controller->w_size);
-+ if (tx_buf)
-+ for (i = 0; i < num_bytes; i++) {
-+ data = tx_buf[controller->tx_bytes + i];
-+ word |= data << (BITS_PER_BYTE * (3 - i));
- }
-
-- data = tx_buf[controller->tx_bytes];
-- word |= data << (BITS_PER_BYTE * (3 - idx));
-- }
-+ controller->tx_bytes += num_bytes;
-
- writel_relaxed(word, controller->base + QUP_OUTPUT_FIFO);
- }
-@@ -291,6 +338,44 @@ static void spi_qup_dma_done(void *data)
- complete(done);
- }
-
-+static void spi_qup_write(struct spi_qup *controller,
-+ struct spi_transfer *xfer)
-+{
-+ bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
-+ u32 remainder, words_per_block, num_words;
-+
-+ remainder = DIV_ROUND_UP(xfer->len - controller->tx_bytes,
-+ controller->w_size);
-+ words_per_block = controller->out_blk_sz >> 2;
-+
-+ do {
-+ /* ACK by clearing service flag */
-+ writel_relaxed(QUP_OP_OUT_SERVICE_FLAG,
-+ controller->base + QUP_OPERATIONAL);
-+
-+ if (is_block_mode) {
-+ num_words = (remainder > words_per_block) ?
-+ words_per_block : remainder;
-+ } else {
-+ if (spi_qup_is_flag_set(controller,
-+ QUP_OP_OUT_FIFO_FULL))
-+ break;
-+
-+ num_words = 1;
-+ }
-+
-+ spi_qup_write_to_fifo(controller, xfer, num_words);
-+
-+ remainder -= num_words;
-+
-+ /* if block mode, check to see if next block is available */
-+ if (is_block_mode && !spi_qup_is_flag_set(controller,
-+ QUP_OP_OUT_BLOCK_WRITE_REQ))
-+ break;
-+
-+ } while (remainder);
-+}
-+
- static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
- enum dma_transfer_direction dir,
- dma_async_tx_callback callback,
-@@ -348,11 +433,13 @@ unsigned long timeout)
- return ret;
- }
-
-- if (xfer->rx_buf)
-- rx_done = spi_qup_dma_done;
-+ if (!qup->qup_v1) {
-+ if (xfer->rx_buf)
-+ rx_done = spi_qup_dma_done;
-
-- if (xfer->tx_buf)
-- tx_done = spi_qup_dma_done;
-+ if (xfer->tx_buf)
-+ tx_done = spi_qup_dma_done;
-+ }
-
- if (xfer->rx_buf) {
- ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM, rx_done,
-@@ -401,7 +488,7 @@ static int spi_qup_do_pio(struct spi_mas
- }
-
- if (qup->mode == QUP_IO_M_MODE_FIFO)
-- spi_qup_fifo_write(qup, xfer);
-+ spi_qup_write(qup, xfer);
-
- ret = spi_qup_set_state(qup, QUP_STATE_RUN);
- if (ret) {
-@@ -434,10 +521,11 @@ static irqreturn_t spi_qup_qup_irq(int i
-
- writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS);
- writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS);
-- writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
-
- if (!xfer) {
-- dev_err_ratelimited(controller->dev, "unexpected irq %08x %08x %08x\n",
-+ writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
-+ dev_err_ratelimited(controller->dev,
-+ "unexpected irq %08x %08x %08x\n",
- qup_err, spi_err, opflags);
- return IRQ_HANDLED;
- }
-@@ -463,12 +551,20 @@ static irqreturn_t spi_qup_qup_irq(int i
- error = -EIO;
- }
-
-- if (!spi_qup_is_dma_xfer(controller->mode)) {
-+ if (spi_qup_is_dma_xfer(controller->mode)) {
-+ writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
-+ if (opflags & QUP_OP_IN_SERVICE_FLAG &&
-+ opflags & QUP_OP_MAX_INPUT_DONE_FLAG)
-+ complete(&controller->done);
-+ if (opflags & QUP_OP_OUT_SERVICE_FLAG &&
-+ opflags & QUP_OP_MAX_OUTPUT_DONE_FLAG)
-+ complete(&controller->dma_tx_done);
-+ } else {
- if (opflags & QUP_OP_IN_SERVICE_FLAG)
-- spi_qup_fifo_read(controller, xfer);
-+ spi_qup_read(controller, xfer);
-
- if (opflags & QUP_OP_OUT_SERVICE_FLAG)
-- spi_qup_fifo_write(controller, xfer);
-+ spi_qup_write(controller, xfer);
- }
-
- spin_lock_irqsave(&controller->lock, flags);
-@@ -476,6 +572,9 @@ static irqreturn_t spi_qup_qup_irq(int i
- controller->xfer = xfer;
- spin_unlock_irqrestore(&controller->lock, flags);
-
-+ /* re-read opflags as flags may have changed due to actions above */
-+ opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
-+
- if ((controller->rx_bytes == xfer->len &&
- (opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) || error)
- complete(&controller->done);
-@@ -519,11 +618,13 @@ static int spi_qup_io_config(struct spi_
- /* must be zero for FIFO */
- writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
- writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
-- controller->use_dma = 0;
- } else if (spi->master->can_dma &&
- spi->master->can_dma(spi->master, spi, xfer) &&
- spi->master->cur_msg_mapped) {
- controller->mode = QUP_IO_M_MODE_BAM;
-+ writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
-+ writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
-+ /* must be zero for BLOCK and BAM */
- writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
- writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
-
diff --git a/target/linux/ipq806x/patches-4.4/714-spi-qup-properly-detect-extra-interrupts.patch b/target/linux/ipq806x/patches-4.4/714-spi-qup-properly-detect-extra-interrupts.patch
deleted file mode 100644
index 0039962481..0000000000
--- a/target/linux/ipq806x/patches-4.4/714-spi-qup-properly-detect-extra-interrupts.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From b69e5e855aaae2dd9f7fc6f4a40af8e6e0cf98ee Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Thu, 10 Mar 2016 16:44:55 -0600
-Subject: [PATCH] spi: qup: properly detect extra interrupts
-
-It's possible for a SPI transaction to complete and get another
-interrupt and have it processed on the same spi_transfer before the
-transfer_one can set it to NULL.
-
-This masks unexpected interrupts, so let's set the spi_transfer to
-NULL in the interrupt once the transaction is done. So we can
-properly detect these bad interrupts and print warning messages.
-
-Change-Id: I0e70ed59fb50e5c48a72a38f74bd178b17c9f24d
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- drivers/spi/spi-qup.c | 15 +++++++++------
- 1 file changed, 9 insertions(+), 6 deletions(-)
-
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -509,6 +509,7 @@ static irqreturn_t spi_qup_qup_irq(int i
- u32 opflags, qup_err, spi_err;
- unsigned long flags;
- int error = 0;
-+ bool done = 0;
-
- spin_lock_irqsave(&controller->lock, flags);
- xfer = controller->xfer;
-@@ -567,16 +568,19 @@ static irqreturn_t spi_qup_qup_irq(int i
- spi_qup_write(controller, xfer);
- }
-
-- spin_lock_irqsave(&controller->lock, flags);
-- controller->error = error;
-- controller->xfer = xfer;
-- spin_unlock_irqrestore(&controller->lock, flags);
--
- /* re-read opflags as flags may have changed due to actions above */
- opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
-
- if ((controller->rx_bytes == xfer->len &&
- (opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) || error)
-+ done = true;
-+
-+ spin_lock_irqsave(&controller->lock, flags);
-+ controller->error = error;
-+ controller->xfer = done ? NULL : xfer;
-+ spin_unlock_irqrestore(&controller->lock, flags);
-+
-+ if (done)
- complete(&controller->done);
-
- return IRQ_HANDLED;
-@@ -769,7 +773,6 @@ static int spi_qup_transfer_one(struct s
- exit:
- spi_qup_set_state(controller, QUP_STATE_RESET);
- spin_lock_irqsave(&controller->lock, flags);
-- controller->xfer = NULL;
- if (!ret)
- ret = controller->error;
- spin_unlock_irqrestore(&controller->lock, flags);
diff --git a/target/linux/ipq806x/patches-4.4/715-spi-qup-don-t-re-read-opflags-to-see-if-transaction-.patch b/target/linux/ipq806x/patches-4.4/715-spi-qup-don-t-re-read-opflags-to-see-if-transaction-.patch
deleted file mode 100644
index a08b442d50..0000000000
--- a/target/linux/ipq806x/patches-4.4/715-spi-qup-don-t-re-read-opflags-to-see-if-transaction-.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From f57ff801665b868d8607c9e872466b54982564bc Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Thu, 10 Mar 2016 16:48:27 -0600
-Subject: [PATCH] spi: qup: don't re-read opflags to see if transaction is done
- for reads
-
-For reads, we will get another interrupt so we need to handle things
-then. For writes, we can finish up now.
-
-Change-Id: I4fa95ae7bb9d78f8ba54c613b981b37d4ea81d7e
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- drivers/spi/spi-qup.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -569,7 +569,8 @@ static irqreturn_t spi_qup_qup_irq(int i
- }
-
- /* re-read opflags as flags may have changed due to actions above */
-- opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
-+ if (opflags & QUP_OP_OUT_SERVICE_FLAG)
-+ opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
-
- if ((controller->rx_bytes == xfer->len &&
- (opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) || error)
diff --git a/target/linux/ipq806x/patches-4.4/800-devicetree.patch b/target/linux/ipq806x/patches-4.4/800-devicetree.patch
deleted file mode 100644
index 916e2efd72..0000000000
--- a/target/linux/ipq806x/patches-4.4/800-devicetree.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 7e77aa188a7a7c4391856a9e5ef5ef58f769e679 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Aug 2015 13:02:38 +0200
-Subject: [PATCH] ARM: qcom: add Netgear Nighthawk X4 R7500 device tree
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/qcom-ipq8064-r7500.dts | 370 +++++++++++++++++++++++++++++++
- 2 files changed, 371 insertions(+)
- create mode 100644 arch/arm/boot/dts/qcom-ipq8064-r7500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -506,7 +506,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8084-ifc6540.dtb \
- qcom-apq8084-mtp.dtb \
- qcom-ipq8064-ap148.dtb \
-+ qcom-ipq8064-c2600.dtb \
-+ qcom-ipq8064-d7800.dtb \
- qcom-ipq8064-db149.dtb \
-+ qcom-ipq8064-ea8500.dtb \
-+ qcom-ipq8064-r7500.dtb \
-+ qcom-ipq8064-r7500v2.dtb \
-+ qcom-ipq8065-nbg6817.dtb \
-+ qcom-ipq8065-r7800.dtb \
- qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-msm8974-sony-xperia-honami.dtb
diff --git a/target/linux/ipq806x/patches-4.4/801-override-compiler-flags.patch b/target/linux/ipq806x/patches-4.4/801-override-compiler-flags.patch
deleted file mode 100644
index 5b419a75d8..0000000000
--- a/target/linux/ipq806x/patches-4.4/801-override-compiler-flags.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -72,7 +72,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
- # macro, but instead defines a whole series of macros which makes
- # testing for a specific architecture or later rather impossible.
- arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
--arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
- arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
- # Only override the compiler option if ARMv6. The ARMv6K extensions are
- # always available in ARMv7
diff --git a/target/linux/ipq806x/patches-4.4/802-GPIO-add-named-gpio-exports.patch b/target/linux/ipq806x/patches-4.4/802-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index cfdab760a5..0000000000
--- a/target/linux/ipq806x/patches-4.4/802-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 24/53] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib-sysfs.c | 10 +++++-
- include/asm-generic/gpio.h | 6 ++++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 91 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
-
-@@ -450,3 +452,69 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int __init of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+};
-+
-+static int __init of_gpio_export_init(void)
-+{
-+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
-+}
-+device_initcall(of_gpio_export_init);
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -544,7 +544,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- struct gpiod_data *data;
-@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, chip->dev,
- MKDEV(0, 0), data, gpio_groups,
-@@ -625,6 +627,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *desc)
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
diff --git a/target/linux/ipq806x/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch b/target/linux/ipq806x/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch
deleted file mode 100644
index be15ec4772..0000000000
--- a/target/linux/ipq806x/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch
+++ /dev/null
@@ -1,185 +0,0 @@
-Author: Adrian Panella <ianchi74@outlook.com>
-Date: Fri Jun 10 19:10:15 2016 -0500
-
-generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1928,6 +1928,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
-
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ bool "Append rootblock parsing bootloader's kernel arguments"
-+ help
-+ The command-line arguments provided by the boot loader will be
-+ appended to a new device tree property: bootloader-args.
-+ If there is a property "append-rootblock" in DT under /chosen
-+ and a root= option in bootloaders command line it will be parsed
-+ and added to DT bootargs with the form: <append-rootblock>XX.
-+ Only command line ATAG will be processed, the rest of the ATAGs
-+ sent by bootloader will be ignored.
-+
- endchoice
-
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -3,6 +3,8 @@
-
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -66,6 +68,59 @@ static uint32_t get_cell_size(const void
- return cell_size;
- }
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+ char *ptr, *end;
-+ char *root="root=";
-+ int i, l;
-+ const char *rootblock;
-+
-+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+ ptr = str - 1;
-+
-+ do {
-+ //first find an 'r' at the begining or after a space
-+ do {
-+ ptr++;
-+ ptr = strchr(ptr, 'r');
-+ if(!ptr) return dest;
-+
-+ } while (ptr != str && *(ptr-1) != ' ');
-+
-+ //then check for the rest
-+ for(i = 1; i <= 4; i++)
-+ if(*(ptr+i) != *(root+i)) break;
-+
-+ } while (i != 5);
-+
-+ end = strchr(ptr, ' ');
-+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+ ptr = end + 1;
-+
-+ /* if append-rootblock property is set use it to append to command line */
-+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+ if(rootblock != NULL) {
-+ if(*dest != ' ') {
-+ *dest = ' ';
-+ dest++;
-+ len++;
-+ }
-+ if (len + l + i <= COMMAND_LINE_SIZE) {
-+ memcpy(dest, rootblock, l);
-+ dest += l - 1;
-+ memcpy(dest, ptr, i);
-+ dest += i;
-+ }
-+ }
-+ return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- char cmdline[COMMAND_LINE_SIZE];
-@@ -85,12 +140,21 @@ static void merge_fdt_bootargs(void *fdt
-
- /* and append the ATAG_CMDLINE */
- if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //save original bootloader args
-+ //and append ubi.mtd with root partition number to current cmdline
-+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
- }
-+#endif
- }
- *ptr = '\0';
-
-@@ -147,7 +211,9 @@ int atags_to_fdt(void *atag_list, void *
- else
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
-- } else if (atag->hdr.tag == ATAG_MEM) {
-+ }
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ else if (atag->hdr.tag == ATAG_MEM) {
- if (memcount >= sizeof(mem_reg_property)/4)
- continue;
- if (!atag->u.mem.size)
-@@ -186,6 +252,10 @@ int atags_to_fdt(void *atag_list, void *
- setprop(fdt, "/memory", "reg", mem_reg_property,
- 4 * memcount * memsize);
- }
-+#else
-+
-+ }
-+#endif
-
- return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -88,6 +88,10 @@
- #include <asm/sections.h>
- #include <asm/cacheflush.h>
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
-
- extern void init_IRQ(void);
-@@ -560,6 +564,18 @@ asmlinkage __visible void __init start_k
- page_alloc_init();
-
- pr_notice("Kernel command line: %s\n", boot_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //Show bootloader's original command line for reference
-+ if(of_chosen) {
-+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+ if(prop)
-+ pr_notice("Bootloader command line (ignored): %s\n", prop);
-+ else
-+ pr_notice("Bootloader command line not present\n");
-+ }
-+#endif
-+
- parse_early_param();
- after_dashes = parse_args("Booting kernel",
- static_command_line, __start___param,