diff options
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 5 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 4 | ||||
| -rw-r--r-- | target/linux/ramips/dts/WR1000.dts | 144 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt76x8.mk | 13 |
4 files changed, 166 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index ccbe53d770..24234dfddd 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -91,6 +91,11 @@ cf-wr800n) ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1 set_wifi_led "$boardname:white:wifi" ;; +cudy,wr1000) + ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" + ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08" + ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04" + ;; d240) set_wifi_led "$boardname:blue:wifi" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index dcc7b4a747..48ba1ba6a6 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -298,6 +298,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "4:lan" "6t@eth0" ;; + cudy,wr1000) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; cy-swr1100) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0" diff --git a/target/linux/ramips/dts/WR1000.dts b/target/linux/ramips/dts/WR1000.dts new file mode 100644 index 0000000000..ff0b9badd1 --- /dev/null +++ b/target/linux/ramips/dts/WR1000.dts @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7628an.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "cudy,wr1000", "mediatek,mt7628an-soc"; + model = "Cudy WR1000"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-upgrade = &led_wps; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "rfkill"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan1 { + label = "wr1000:blue:lan1"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "wr1000:blue:lan2"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "wr1000:blue:wan"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "wr1000:blue:wlan2g"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_wps: wps { + label = "wr1000:blue:wps"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2s", "refclk", "wdt", "p4led_an", + "p3led_an", "p2led_an", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +&wmac { + status = "okay"; + ralink,mtd-eeprom = <&factory 0x4>; +}; + +ðernet { + mtd-mac-address = <&factory 0x2e>; + mediatek,portmap = "llllw"; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 22d79bad39..ca279a7d61 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -27,6 +27,19 @@ define Device/alfa-network_awusfree1 endef TARGET_DEVICES += alfa-network_awusfree1 +define Device/cudy_wr1000 + DTS := WR1000 + IMAGE_SIZE := $(ralink_default_fw_size_8M) + IMAGES += factory.bin + IMAGE/factory.bin := \ + $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 92.122 + JCG_MAXSIZE := 8060928 + DEVICE_TITLE := Cudy WR1000 + DEVICE_PACKAGES := kmod-mt76x2 + SUPPORTED_DEVICES += wr1000 +endef +TARGET_DEVICES += cudy_wr1000 + define Device/tama_w06 DTS := W06 IMAGE_SIZE := 15040k |