diff options
Diffstat (limited to 'target')
40 files changed, 2286 insertions, 9 deletions
diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile index 85279d50d8..c3fb0c323b 100644 --- a/target/linux/ramips/Makefile +++ b/target/linux/ramips/Makefile @@ -8,8 +8,8 @@ include $(TOPDIR)/rules.mk ARCH:=mipsel BOARD:=ramips -BOARDNAME:=Ralink RT288x/RT305x -SUBTARGETS:=rt288x rt305x +BOARDNAME:=Ralink RT288x/RT3xxx +SUBTARGETS:=rt288x rt305x rt3883 CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves FEATURES:=squashfs @@ -22,7 +22,7 @@ DEFAULT_PACKAGES+=\ kmod-rt2800-pci wpad-mini maccalc define Target/Description - Build firmware images for Ralink RT288x/RT305x based boards. + Build firmware images for Ralink RT288x/RT3xxx based boards. endef $(eval $(call BuildTarget)) diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h new file mode 100644 index 0000000000..54203db8ea --- /dev/null +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h @@ -0,0 +1,23 @@ +/* + * Platform data definition for the built-in NAND controller of the + * Ralink RT305X/RT3662/RT3883 SoCs + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RAMIPS_NAND_PLATFORM_H +#define _RAMIPS_NAND_PLATFORM_H + +#define RAMIPS_NAND_DRIVER_NAME "ramips-nand" + +struct ramips_nand_platform_data { + const char *name; + struct mtd_partition *parts; + int nr_parts; +}; + +#endif /* _RAMIPS_NAND_PLATFORM_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883.h new file mode 100644 index 0000000000..004acfb73b --- /dev/null +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883.h @@ -0,0 +1,133 @@ +/* + * Ralink RT3662/RT3883 SoC specific definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_H_ +#define _RT3883_H_ + +#include <linux/init.h> +#include <linux/io.h> + +void rt3883_detect_sys_type(void); + +#define RT3883_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT3883_MEM_SIZE_MAX (256 * 1024 * 1024) + +#define RT3883_CPU_IRQ_BASE 0 +#define RT3883_CPU_IRQ_COUNT 8 +#define RT3883_INTC_IRQ_BASE (RT3883_CPU_IRQ_BASE + RT3883_CPU_IRQ_COUNT) +#define RT3883_INTC_IRQ_COUNT 32 +#define RT3883_GPIO_IRQ_BASE (RT3883_INTC_IRQ_BASE + RT3883_INTC_IRQ_COUNT) + +#define RT3883_CPU_IRQ_INTC (RT3883_CPU_IRQ_BASE + 2) +#define RT3883_CPU_IRQ_PCI (RT3883_CPU_IRQ_BASE + 4) +#define RT3883_CPU_IRQ_FE (RT3883_CPU_IRQ_BASE + 5) +#define RT3883_CPU_IRQ_WLAN (RT3883_CPU_IRQ_BASE + 6) +#define RT3883_CPU_IRQ_COUNTER (RT3883_CPU_IRQ_BASE + 7) + +#define RT3883_INTC_IRQ_SYSCTL (RT3883_INTC_IRQ_BASE + 0) +#define RT3883_INTC_IRQ_TIMER0 (RT3883_INTC_IRQ_BASE + 1) +#define RT3883_INTC_IRQ_TIMER1 (RT3883_INTC_IRQ_BASE + 2) +#define RT3883_INTC_IRQ_IA (RT3883_INTC_IRQ_BASE + 3) +#define RT3883_INTC_IRQ_PCM (RT3883_INTC_IRQ_BASE + 4) +#define RT3883_INTC_IRQ_UART0 (RT3883_INTC_IRQ_BASE + 5) +#define RT3883_INTC_IRQ_PIO (RT3883_INTC_IRQ_BASE + 6) +#define RT3883_INTC_IRQ_DMA (RT3883_INTC_IRQ_BASE + 7) +#define RT3883_INTC_IRQ_NAND (RT3883_INTC_IRQ_BASE + 8) +#define RT3883_INTC_IRQ_PERFC (RT3883_INTC_IRQ_BASE + 9) +#define RT3883_INTC_IRQ_I2S (RT3883_INTC_IRQ_BASE + 10) +#define RT3883_INTC_IRQ_UART1 (RT3883_INTC_IRQ_BASE + 12) +#define RT3883_INTC_IRQ_UHST (RT3883_INTC_IRQ_BASE + 18) +#define RT3883_INTC_IRQ_UDEV (RT3883_INTC_IRQ_BASE + 19) + +extern void __iomem *rt3883_sysc_base; +extern void __iomem *rt3883_memc_base; + +static inline void rt3883_sysc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt3883_sysc_base + reg); +} + +static inline u32 rt3883_sysc_rr(unsigned reg) +{ + return __raw_readl(rt3883_sysc_base + reg); +} + +static inline void rt3883_memc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt3883_memc_base + reg); +} + +static inline u32 rt3883_memc_rr(unsigned reg) +{ + return __raw_readl(rt3883_memc_base + reg); +} + +#define RT3883_GPIO_I2C_SD 1 +#define RT3883_GPIO_I2C_SCLK 2 +#define RT3883_GPIO_SPI_CS0 3 +#define RT3883_GPIO_SPI_CLK 4 +#define RT3883_GPIO_SPI_MOSI 5 +#define RT3883_GPIO_SPI_MISO 6 +/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ +#define RT3883_GPIO_7 7 +#define RT3883_GPIO_8 8 +#define RT3883_GPIO_9 9 +#define RT3883_GPIO_10 10 +#define RT3883_GPIO_11 11 +#define RT3883_GPIO_12 12 +#define RT3883_GPIO_13 13 +#define RT3883_GPIO_14 14 +#define RT3883_GPIO_UART1_TXD 15 +#define RT3883_GPIO_UART1_RXD 16 +#define RT3883_GPIO_JTAG_TDO 17 +#define RT3883_GPIO_JTAG_TDI 18 +#define RT3883_GPIO_JTAG_TMS 19 +#define RT3883_GPIO_JTAG_TCLK 20 +#define RT3883_GPIO_JTAG_TRST_N 21 +#define RT3883_GPIO_MDIO_MDC 22 +#define RT3883_GPIO_MDIO_MDIO 23 +#define RT3883_GPIO_LNA_PE_A0 32 +#define RT3883_GPIO_LNA_PE_A1 33 +#define RT3883_GPIO_LNA_PE_A2 34 +#define RT3883_GPIO_LNA_PE_G0 35 +#define RT3883_GPIO_LNA_PE_G1 36 +#define RT3883_GPIO_LNA_PE_G2 37 +#define RT3883_GPIO_PCI_AD0 40 +#define RT3883_GPIO_PCI_AD31 71 +#define RT3883_GPIO_GE2_TXD0 72 +#define RT3883_GPIO_GE2_TXD1 73 +#define RT3883_GPIO_GE2_TXD2 74 +#define RT3883_GPIO_GE2_TXD3 75 +#define RT3883_GPIO_GE2_TXEN 76 +#define RT3883_GPIO_GE2_TXCLK 77 +#define RT3883_GPIO_GE2_RXD0 78 +#define RT3883_GPIO_GE2_RXD1 79 +#define RT3883_GPIO_GE2_RXD2 80 +#define RT3883_GPIO_GE2_RXD3 81 +#define RT3883_GPIO_GE2_RXDV 82 +#define RT3883_GPIO_GE2_RXCLK 83 +#define RT3883_GPIO_GE1_TXD0 84 +#define RT3883_GPIO_GE1_TXD1 85 +#define RT3883_GPIO_GE1_TXD2 86 +#define RT3883_GPIO_GE1_TXD3 87 +#define RT3883_GPIO_GE1_TXEN 88 +#define RT3883_GPIO_GE1_TXCLK 89 +#define RT3883_GPIO_GE1_RXD0 90 +#define RT3883_GPIO_GE1_RXD1 91 +#define RT3883_GPIO_GE1_RXD2 92 +#define RT3883_GPIO_GE1_RXD3 93 +#define RT3883_GPIO_GE1_RXDV 94 +#define RT3883_GPIO_GE1_RXCLK 95 + +void rt3883_gpio_init(u32 mode); + +#endif /* _RT3883_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h new file mode 100644 index 0000000000..7ff0b358e2 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h @@ -0,0 +1,55 @@ +/* + * Ralink RT3662/RT3883 specific CPU feature overrides + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/ralink_soc.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/ralink_soc.h new file mode 100644 index 0000000000..8a080b7d27 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/ralink_soc.h @@ -0,0 +1,18 @@ +/* + * Ralink RT3662/RT3883 specific SOC defines + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_RALINK_SOC_H +#define _RT3883_RALINK_SOC_H + +#define RALINK_SOC_SDRAM_BASE 0 +#define RALINK_SOC_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RALINK_SOC_MEM_SIZE_MAX (256 * 1024 * 1024) + +#endif /* _RT3883_RALINK_SOC_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_ehci_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_ehci_platform.h new file mode 100644 index 0000000000..a83c458507 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_ehci_platform.h @@ -0,0 +1,20 @@ +/* + * Platform data definition for built-in EHCI controller of the + * Ralink RT3662/RT3883 SoCs + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_EHCI_PLATFORM_H +#define _RT3883_EHCI_PLATFORM_H + +struct rt3883_ehci_platform_data { + void (*start_hw)(void); + void (*stop_hw)(void); +}; + +#endif /* _RT3883_EHCI_PLATFORM_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_ohci_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_ohci_platform.h new file mode 100644 index 0000000000..cc8383bf3d --- /dev/null +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_ohci_platform.h @@ -0,0 +1,20 @@ +/* + * Platform data definition for built-in OHCI controller of the + * Ralink RT3662/RT3883 SoCs + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_OHCI_PLATFORM_H +#define _RT3883_OHCI_PLATFORM_H + +struct rt3883_ohci_platform_data { + void (*start_hw)(void); + void (*stop_hw)(void); +}; + +#endif /* _RT3883_OHCI_PLATFORM_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_regs.h new file mode 100644 index 0000000000..7149e6fafd --- /dev/null +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_regs.h @@ -0,0 +1,199 @@ +/* + * Ralink RT3662/RT3883 SoC register definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_REGS_H_ +#define _RT3883_REGS_H_ + +#include <linux/bitops.h> + +#define RT3883_SDRAM_BASE 0x00000000 +#define RT3883_SYSC_BASE 0x10000000 +#define RT3883_TIMER_BASE 0x10000100 +#define RT3883_INTC_BASE 0x10000200 +#define RT3883_MEMC_BASE 0x10000300 +#define RT3883_UART0_BASE 0x10000500 +#define RT3883_PIO_BASE 0x10000600 +#define RT3883_FSCC_BASE 0x10000700 +#define RT3883_NANDC_BASE 0x10000810 +#define RT3883_I2C_BASE 0x10000900 +#define RT3883_I2S_BASE 0x10000a00 +#define RT3883_SPI_BASE 0x10000b00 +#define RT3883_UART1_BASE 0x10000c00 +#define RT3883_PCM_BASE 0x10002000 +#define RT3883_GDMA_BASE 0x10002800 +#define RT3883_CODEC1_BASE 0x10003000 +#define RT3883_CODEC2_BASE 0x10003800 +#define RT3883_FE_BASE 0x10100000 +#define RT3883_ROM_BASE 0x10118000 +#define RT3883_USBDEV_BASE 0x10112000 +#define RT3883_PCI_BASE 0x10140000 +#define RT3883_WLAN_BASE 0x10180000 +#define RT3883_USBHOST_BASE 0x101c0000 +#define RT3883_BOOT_BASE 0x1c000000 +#define RT3883_SRAM_BASE 0x1e000000 +#define RT3883_PCIMEM_BASE 0x20000000 + +#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE) +#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000) + +#define RT3883_SYSC_SIZE 0x100 +#define RT3883_TIMER_SIZE 0x100 +#define RT3883_INTC_SIZE 0x100 +#define RT3883_MEMC_SIZE 0x100 +#define RT3883_UART0_SIZE 0x100 +#define RT3883_UART1_SIZE 0x100 +#define RT3883_PIO_SIZE 0x100 +#define RT3883_FSCC_SIZE 0x100 +#define RT3883_NANDC_SIZE 0x0f0 +#define RT3883_I2C_SIZE 0x100 +#define RT3883_I2S_SIZE 0x100 +#define RT3883_SPI_SIZE 0x100 +#define RT3883_PCM_SIZE 0x800 +#define RT3883_GDMA_SIZE 0x800 +#define RT3883_CODEC1_SIZE 0x800 +#define RT3883_CODEC2_SIZE 0x800 +#define RT3883_FE_SIZE 0x10000 +#define RT3883_ROM_SIZE 0x4000 +#define RT3883_USBDEV_SIZE 0x4000 +#define RT3883_PCI_SIZE 0x40000 +#define RT3883_WLAN_SIZE 0x40000 +#define RT3883_USBHOST_SIZE 0x40000 +#define RT3883_BOOT_SIZE (32 * 1024 * 1024) +#define RT3883_SRAM_SIZE (32 * 1024 * 1024) + +/* SYSC registers */ +#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */ +#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */ +#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */ +#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */ +#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */ +#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */ +#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */ +#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/ +#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/ +#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */ +#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */ +#define RT3883_SYSC_REG_PMU 0x88 +#define RT3883_SYSC_REG_PMU1 0x8c + +#define RT3883_REVID_VER_ID_MASK 0x0f +#define RT3883_REVID_VER_ID_SHIFT 8 +#define RT3883_REVID_ECO_ID_MASK 0x0f + +#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17) +#define RT3883_SYSCFG0_CPUCLK_SHIFT 8 +#define RT3883_SYSCFG0_CPUCLK_MASK 0x3 +#define RT3883_SYSCFG0_CPUCLK_250 0x0 +#define RT3883_SYSCFG0_CPUCLK_384 0x1 +#define RT3883_SYSCFG0_CPUCLK_480 0x2 +#define RT3883_SYSCFG0_CPUCLK_500 0x3 + +#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10) +#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2) + +#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) + +#define RT3883_GPIO_MODE_I2C BIT(0) +#define RT3883_GPIO_MODE_SPI BIT(1) +#define RT3883_GPIO_MODE_UART0_SHIFT 2 +#define RT3883_GPIO_MODE_UART0_MASK 0x7 +#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) +#define RT3883_GPIO_MODE_UARTF 0x0 +#define RT3883_GPIO_MODE_PCM_UARTF 0x1 +#define RT3883_GPIO_MODE_PCM_I2S 0x2 +#define RT3883_GPIO_MODE_I2S_UARTF 0x3 +#define RT3883_GPIO_MODE_PCM_GPIO 0x4 +#define RT3883_GPIO_MODE_GPIO_UARTF 0x5 +#define RT3883_GPIO_MODE_GPIO_I2S 0x6 +#define RT3883_GPIO_MODE_GPIO 0x7 +#define RT3883_GPIO_MODE_UART1 BIT(5) +#define RT3883_GPIO_MODE_JTAG BIT(6) +#define RT3883_GPIO_MODE_MDIO BIT(7) +#define RT3883_GPIO_MODE_GE1 BIT(9) +#define RT3883_GPIO_MODE_GE2 BIT(10) +#define RT3883_GPIO_MODE_PCI_SHIFT 11 +#define RT3883_GPIO_MODE_PCI_MASK 0x7 +#define RT3883_GPIO_MODE_PCI(_x) ((_x) << RT3883_GPIO_MODE_PCI_SHIFT) +#define RT3883_GPIO_MODE_PCI_DEV 0 +#define RT3883_GPIO_MODE_PCI_HOST2 1 +#define RT3883_GPIO_MODE_PCI_HOST1 2 +#define RT3883_GPIO_MODE_PCI_FNC 3 +#define RT3883_GPIO_MODE_PCI_GPIO 7 +#define RT3883_GPIO_MODE_LNA_A_SHIFT 16 +#define RT3883_GPIO_MODE_LNA_A_MASK 0x3 +#define RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT) +#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3 +#define RT3883_GPIO_MODE_LNA_G_SHIFT 18 +#define RT3883_GPIO_MODE_LNA_G_MASK 0x3 +#define RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT) +#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3 + +#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27) +#define RT3883_RSTCTRL_FLASH BIT(26) +#define RT3883_RSTCTRL_UDEV BIT(25) +#define RT3883_RSTCTRL_PCI BIT(24) +#define RT3883_RSTCTRL_PCIE BIT(23) +#define RT3883_RSTCTRL_UHST BIT(22) +#define RT3883_RSTCTRL_FE BIT(21) +#define RT3883_RSTCTRL_WLAN BIT(20) +#define RT3883_RSTCTRL_UART1 BIT(29) +#define RT3883_RSTCTRL_SPI BIT(18) +#define RT3883_RSTCTRL_I2S BIT(17) +#define RT3883_RSTCTRL_I2C BIT(16) +#define RT3883_RSTCTRL_NAND BIT(15) +#define RT3883_RSTCTRL_DMA BIT(14) +#define RT3883_RSTCTRL_PIO BIT(13) +#define RT3883_RSTCTRL_UART BIT(12) +#define RT3883_RSTCTRL_PCM BIT(11) +#define RT3883_RSTCTRL_MC BIT(10) +#define RT3883_RSTCTRL_INTC BIT(9) +#define RT3883_RSTCTRL_TIMER BIT(8) +#define RT3883_RSTCTRL_SYS BIT(0) + +#define RT3883_INTC_INT_SYSCTL BIT(0) +#define RT3883_INTC_INT_TIMER0 BIT(1) +#define RT3883_INTC_INT_TIMER1 BIT(2) +#define RT3883_INTC_INT_IA BIT(3) +#define RT3883_INTC_INT_PCM BIT(4) +#define RT3883_INTC_INT_UART0 BIT(5) +#define RT3883_INTC_INT_PIO BIT(6) +#define RT3883_INTC_INT_DMA BIT(7) +#define RT3883_INTC_INT_NAND BIT(8) +#define RT3883_INTC_INT_PERFC BIT(9) +#define RT3883_INTC_INT_I2S BIT(10) +#define RT3883_INTC_INT_UART1 BIT(12) +#define RT3883_INTC_INT_UHST BIT(18) +#define RT3883_INTC_INT_UDEV BIT(19) + +/* FLASH/SRAM/Codec Controller registers */ +#define RT3883_FSCC_REG_FLASH_CFG0 0x00 +#define RT3883_FSCC_REG_FLASH_CFG1 0x04 +#define RT3883_FSCC_REG_CODEC_CFG0 0x40 +#define RT3883_FSCC_REG_CODEC_CFG1 0x44 + +#define RT3883_FLASH_CFG_WIDTH_SHIFT 26 +#define RT3883_FLASH_CFG_WIDTH_MASK 0x3 +#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0 +#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1 +#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2 + + +/* UART registers */ +#define RT3883_UART_REG_RX 0 +#define RT3883_UART_REG_TX 1 +#define RT3883_UART_REG_IER 2 +#define RT3883_UART_REG_IIR 3 +#define RT3883_UART_REG_FCR 4 +#define RT3883_UART_REG_LCR 5 +#define RT3883_UART_REG_MCR 6 +#define RT3883_UART_REG_LSR 7 + +#endif /* _RT3883_REGS_H_ */ diff --git a/target/linux/ramips/files/arch/mips/ralink/Kconfig b/target/linux/ramips/files/arch/mips/ralink/Kconfig index 1bb6bc3ba4..a7e7f21f97 100644 --- a/target/linux/ramips/files/arch/mips/ralink/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/Kconfig @@ -14,10 +14,15 @@ choice bool "RT305x" select SOC_RT305X + config RALINK_RT3883 + bool "RT3883" + select SOC_RT3883 + endchoice source "arch/mips/ralink/rt288x/Kconfig" source "arch/mips/ralink/rt305x/Kconfig" +source "arch/mips/ralink/rt3883/Kconfig" config SOC_RT288X bool @@ -49,6 +54,22 @@ config SOC_RT305X select MIPS_MACHINE select USB_ARCH_HAS_HCD +config SOC_RT3883 + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select MIPS_MACHINE + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + config RALINK_DEV_GPIO_BUTTONS def_bool n diff --git a/target/linux/ramips/files/arch/mips/ralink/Platform b/target/linux/ramips/files/arch/mips/ralink/Platform index 86871bda33..1b540492c2 100644 --- a/target/linux/ramips/files/arch/mips/ralink/Platform +++ b/target/linux/ramips/files/arch/mips/ralink/Platform @@ -17,3 +17,10 @@ load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000 core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/ cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000 + +# +# Ralink RT3883 +# +core-$(CONFIG_RALINK_RT3883) += arch/mips/ralink/rt3883/ +cflags-$(CONFIG_RALINK_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883 +load-$(CONFIG_RALINK_RT3883) += 0xffffffff80000000 diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig new file mode 100644 index 0000000000..7b4579adbc --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig @@ -0,0 +1,7 @@ +if RALINK_RT3883 + +menu "Ralink RT3662/RT3883 machine selection" + +endmenu + +endif diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile new file mode 100644 index 0000000000..f8098592b1 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the Ralink RT3662/RT3883 SoC specific parts of the kernel +# +# Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o devices.o rt3883.o clock.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/clock.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/clock.c new file mode 100644 index 0000000000..bf70259cae --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/clock.c @@ -0,0 +1,103 @@ +/* + * Ralink RT3662/RT3883 clock API + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include "common.h" + +struct clk { + unsigned long rate; +}; + +static struct clk rt3883_cpu_clk; +static struct clk rt3883_sys_clk; +static struct clk rt3883_wdt_clk; +static struct clk rt3883_uart_clk; + +void __init rt3883_clocks_init(void) +{ + u32 syscfg0; + u32 clksel; + u32 ddr2; + + syscfg0 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG0); + clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) & + RT3883_SYSCFG0_CPUCLK_MASK); + ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2; + + switch (clksel) { + case RT3883_SYSCFG0_CPUCLK_250: + rt3883_cpu_clk.rate = 250000000; + rt3883_sys_clk.rate = (ddr2) ? 125000000 : 83000000; + break; + case RT3883_SYSCFG0_CPUCLK_384: + rt3883_cpu_clk.rate = 384000000; + rt3883_sys_clk.rate = (ddr2) ? 128000000 : 96000000; + break; + case RT3883_SYSCFG0_CPUCLK_480: + rt3883_cpu_clk.rate = 480000000; + rt3883_sys_clk.rate = (ddr2) ? 160000000 : 120000000; + break; + case RT3883_SYSCFG0_CPUCLK_500: + rt3883_cpu_clk.rate = 500000000; + rt3883_sys_clk.rate = (ddr2) ? 166000000 : 125000000; + break; + } + + rt3883_wdt_clk.rate = rt3883_sys_clk.rate; + rt3883_uart_clk.rate = 40000000; +} + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "sys")) + return &rt3883_sys_clk; + + if (!strcmp(id, "cpu")) + return &rt3883_cpu_clk; + + if (!strcmp(id, "wdt")) + return &rt3883_wdt_clk; + + if (!strcmp(id, "uart")) + return &rt3883_uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/common.h b/target/linux/ramips/files/arch/mips/ralink/rt3883/common.h new file mode 100644 index 0000000000..a389dccce0 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/common.h @@ -0,0 +1,16 @@ +/* + * Ralink RT3662/RT3883 SoC common defines + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_COMMON_H +#define _RT3883_COMMON_H + +void rt3883_clocks_init(void); + +#endif /* _RT3883_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.c new file mode 100644 index 0000000000..058402a5a5 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.c @@ -0,0 +1,385 @@ +/* + * Ralink RT3662/RT3883 SoC platform device registration + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/rt2x00_platform.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/rt3883_ehci_platform.h> +#include <asm/mach-ralink/rt3883_ohci_platform.h> +#include <asm/mach-ralink/ramips_nand_platform.h> +#include "devices.h" + +#include <ramips_eth_platform.h> + +static struct resource rt3883_flash0_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_BOOT_BASE, + .end = RT3883_BOOT_BASE + RT3883_BOOT_SIZE - 1, + }, +}; + +struct physmap_flash_data rt3883_flash0_data; +static struct platform_device rt3883_flash0_device = { + .name = "physmap-flash", + .resource = rt3883_flash0_resources, + .num_resources = ARRAY_SIZE(rt3883_flash0_resources), + .dev = { + .platform_data = &rt3883_flash0_data, + }, +}; + +static struct resource rt3883_flash1_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_SRAM_BASE, + .end = RT3883_SRAM_BASE + RT3883_SRAM_SIZE - 1, + }, +}; + +struct physmap_flash_data rt3883_flash1_data; +static struct platform_device rt3883_flash1_device = { + .name = "physmap-flash", + .resource = rt3883_flash1_resources, + .num_resources = ARRAY_SIZE(rt3883_flash1_resources), + .dev = { + .platform_data = &rt3883_flash1_data, + }, +}; + +static int rt3883_flash_instance __initdata; +void __init rt3883_register_pflash(unsigned int id) +{ + struct platform_device *pdev; + struct physmap_flash_data *pdata; + void __iomem *fscc_base; + u32 t; + int reg; + + switch (id) { + case 0: + pdev = &rt3883_flash0_device; + reg = RT3883_FSCC_REG_FLASH_CFG0; + break; + case 1: + pdev = &rt3883_flash1_device; + reg = RT3883_FSCC_REG_FLASH_CFG1; + break; + default: + return; + } + + pdata = pdev->dev.platform_data; + + fscc_base = ioremap(RT3883_FSCC_BASE, RT3883_FSCC_SIZE); + if (!fscc_base) + panic("RT3883: ioremap failed for FSCC"); + + t = __raw_readl(fscc_base + reg); + iounmap(fscc_base); + + t = (t >> RT3883_FLASH_CFG_WIDTH_SHIFT) & RT3883_FLASH_CFG_WIDTH_MASK; + switch (t) { + case RT3883_FLASH_CFG_WIDTH_8BIT: + pdata->width = 1; + break; + case RT3883_FLASH_CFG_WIDTH_16BIT: + pdata->width = 2; + break; + case RT3883_FLASH_CFG_WIDTH_32BIT: + if (id == 1) { + pdata->width = 4; + break; + } + /* fallthrough */ + default: + pr_warn("RT3883: flash bank%d: invalid width detected\n", id); + return; + } + + pdev->id = rt3883_flash_instance; + + platform_device_register(pdev); + rt3883_flash_instance++; +} + +static atomic_t rt3883_usb_use_count = ATOMIC_INIT(0); + +static void rt3883_usb_host_start(void) +{ + u32 t; + + if (atomic_inc_return(&rt3883_usb_use_count) != 1) + return; + + t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS); + +#if 0 + /* put the HOST controller into reset */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t |= RT3883_RSTCTRL_UHST; + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); +#endif + + /* enable clock for port0's and port1's phys */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); + t = t | RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN; + rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1); + mdelay(500); + + /* pull USBHOST and USBDEV out from reset */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t &= ~(RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV); + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); + mdelay(500); + + /* enable host mode */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + t |= RT3883_SYSCFG1_USB0_HOST_MODE; + rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1); + + t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS); +} + +static void rt3883_usb_host_stop(void) +{ + u32 t; + + if (atomic_dec_return(&rt3883_usb_use_count) != 0) + return; + + /* put USBHOST and USBDEV into reset */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t |= RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV; + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); + udelay(10000); + + /* disable clock for port0's and port1's phys*/ + t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); + t &= ~(RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN); + rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1); + udelay(10000); +} + +static struct rt3883_ehci_platform_data rt3883_ehci_data = { + .start_hw = rt3883_usb_host_start, + .stop_hw = rt3883_usb_host_stop, +}; + +static struct resource rt3883_ehci_resources[] = { + { + .start = RT3883_EHCI_BASE, + .end = RT3883_EHCI_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_INTC_IRQ_UHST, + .end = RT3883_INTC_IRQ_UHST, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 rt3883_ehci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3883_ehci_device = { + .name = "rt3883-ehci", + .id = -1, + .resource = rt3883_ehci_resources, + .num_resources = ARRAY_SIZE(rt3883_ehci_resources), + .dev = { + .dma_mask = &rt3883_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3883_ehci_data, + }, +}; + +static struct resource rt3883_ohci_resources[] = { + { + .start = RT3883_OHCI_BASE, + .end = RT3883_OHCI_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_INTC_IRQ_UHST, + .end = RT3883_INTC_IRQ_UHST, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct rt3883_ohci_platform_data rt3883_ohci_data = { + .start_hw = rt3883_usb_host_start, + .stop_hw = rt3883_usb_host_stop, +}; + +static u64 rt3883_ohci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3883_ohci_device = { + .name = "rt3883-ohci", + .id = -1, + .resource = rt3883_ohci_resources, + .num_resources = ARRAY_SIZE(rt3883_ohci_resources), + .dev = { + .dma_mask = &rt3883_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3883_ohci_data, + }, +}; + +void __init rt3883_register_usbhost(void) +{ + platform_device_register(&rt3883_ehci_device); + platform_device_register(&rt3883_ohci_device); +} + +static void rt3883_fe_reset(void) +{ + u32 t; + + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t |= RT3883_RSTCTRL_FE; + rt3883_sysc_wr(t , RT3883_SYSC_REG_RSTCTRL); + + t &= ~RT3883_RSTCTRL_FE; + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); +} + +static struct resource rt3883_eth_resources[] = { + { + .start = RT3883_FE_BASE, + .end = RT3883_FE_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_CPU_IRQ_FE, + .end = RT3883_CPU_IRQ_FE, + .flags = IORESOURCE_IRQ, + }, +}; + +struct ramips_eth_platform_data rt3883_eth_data = { + .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, + .reset_fe = rt3883_fe_reset, + .min_pkt_len = 64, +}; + +static struct platform_device rt3883_eth_device = { + .name = "ramips_eth", + .resource = rt3883_eth_resources, + .num_resources = ARRAY_SIZE(rt3883_eth_resources), + .dev = { + .platform_data = &rt3883_eth_data, + } +}; + +void __init rt3883_register_ethernet(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "sys"); + if (IS_ERR(clk)) + panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); + + rt3883_eth_data.sys_freq = clk_get_rate(clk); + + platform_device_register(&rt3883_eth_device); +} + +static struct resource rt3883_wlan_resources[] = { + { + .start = RT3883_WLAN_BASE, + .end = RT3883_WLAN_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_CPU_IRQ_WLAN, + .end = RT3883_CPU_IRQ_WLAN, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct rt2x00_platform_data rt3883_wlan_data = { + .eeprom_file_name = "rt3883.eeprom", +}; + +static struct platform_device rt3883_wlan_device = { + .name = "rt2800_wmac", + .resource = rt3883_wlan_resources, + .num_resources = ARRAY_SIZE(rt3883_wlan_resources), + .dev = { + .platform_data = &rt3883_wlan_data, + } +}; + +void __init rt3883_register_wlan(void) +{ + platform_device_register(&rt3883_wlan_device); +} + +static struct resource rt3883_wdt_resources[] = { + { + .start = RT3883_TIMER_BASE, + .end = RT3883_TIMER_BASE + RT3883_TIMER_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rt3883_wdt_device = { + .name = "ramips-wdt", + .id = -1, + .resource = rt3883_wdt_resources, + .num_resources = ARRAY_SIZE(rt3883_wdt_resources), +}; + +void __init rt3883_register_wdt(bool enable_reset) +{ + if (enable_reset) { + u32 t; + + /* enable WDT reset output on GPIO 2 */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT; + rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1); + } + + platform_device_register(&rt3883_wdt_device); +} + +static struct resource rt3883_nand_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_NANDC_BASE, + .end = RT3883_NANDC_BASE + RT3883_NANDC_SIZE - 1, + }, +}; + +static struct ramips_nand_platform_data rt3883_nand_data; + +static struct platform_device rt3883_nand_device = { + .name = RAMIPS_NAND_DRIVER_NAME, + .id = -1, + .resource = rt3883_nand_resources, + .num_resources = ARRAY_SIZE(rt3883_nand_resources), + .dev = { + .platform_data = &rt3883_nand_data, + }, +}; + +void __init rt3883_register_nand(struct mtd_partition *parts, int nr_parts) +{ + rt3883_nand_data.parts = parts; + rt3883_nand_data.nr_parts = nr_parts; + platform_device_register(&rt3883_nand_device); +} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.h b/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.h new file mode 100644 index 0000000000..4b460e3555 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.h @@ -0,0 +1,29 @@ +/* + * Ralink RT3662/3883 SoC specific platform device definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_DEVICES_H +#define _RT3883_DEVICES_H + +struct physmap_flash_data; + +extern struct physmap_flash_data rt3883_flash0_data; +extern struct physmap_flash_data rt3883_flash1_data; +void rt3883_register_pflash(unsigned int id); + +struct mtd_partition; +void rt3883_register_nand(struct mtd_partition *parts, int nr_parts); + +extern struct ramips_eth_platform_data rt3883_eth_data; +void rt3883_register_ethernet(void); +void rt3883_register_usbhost(void); +void rt3883_register_wlan(void); +void rt3883_register_wdt(bool enable_reset); + +#endif /* _RT3883_DEVICES_H */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/early_printk.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/early_printk.c new file mode 100644 index 0000000000..e3bf7ba339 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/early_printk.c @@ -0,0 +1,29 @@ +/* + * Ralink RT3662/RT3883 SoC early printk support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/serial_reg.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt3883_regs.h> + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r))) + +#define UART_WRITE(r, v) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r))) + +void prom_putchar(unsigned char ch) +{ + while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0); + UART_WRITE(RT3883_UART_REG_TX, ch); + while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0); +} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/irq.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/irq.c new file mode 100644 index 0000000000..b561fd38cd --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/irq.c @@ -0,0 +1,84 @@ +/* + * Ralink RT3662/RT3883 SoC specific interrupt handling + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> + +static void rt3883_intc_irq_dispatch(void) +{ + u32 pending; + + pending = ramips_intc_get_status(); + + if (pending & RT3883_INTC_INT_TIMER0) + do_IRQ(RT3883_INTC_IRQ_TIMER0); + + else if (pending & RT3883_INTC_INT_TIMER1) + do_IRQ(RT3883_INTC_IRQ_TIMER1); + + else if (pending & RT3883_INTC_INT_UART0) + do_IRQ(RT3883_INTC_IRQ_UART0); + + else if (pending & RT3883_INTC_INT_UART1) + do_IRQ(RT3883_INTC_IRQ_UART1); + + else if (pending & RT3883_INTC_INT_PERFC) + do_IRQ(RT3883_INTC_IRQ_PERFC); + + else if (pending & RT3883_INTC_INT_UHST) + do_IRQ(RT3883_INTC_IRQ_UHST); + + /* TODO: handle PIO interrupts as well */ + + else + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(RT3883_CPU_IRQ_COUNTER); + + else if (pending & STATUSF_IP5) + do_IRQ(RT3883_CPU_IRQ_FE); + + else if (pending & STATUSF_IP6) + do_IRQ(RT3883_CPU_IRQ_WLAN); + + else if (pending & STATUSF_IP4) + do_IRQ(RT3883_CPU_IRQ_PCI); + + else if (pending & STATUSF_IP2) + rt3883_intc_irq_dispatch(); + + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ramips_intc_irq_init(RT3883_INTC_BASE, RT3883_CPU_IRQ_INTC, + RT3883_INTC_IRQ_BASE); + cp0_perfcount_irq = RT3883_INTC_IRQ_PERFC; +} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/rt3883.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/rt3883.c new file mode 100644 index 0000000000..6e75b390f8 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/rt3883.c @@ -0,0 +1,211 @@ +/* + * Ralink RT3662/RT3883 SoC specific setup + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/ramips_gpio.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> + +void __iomem * rt3883_sysc_base; +void __iomem * rt3883_memc_base; + +void __init rt3883_detect_sys_type(void) +{ + u32 n0; + u32 n1; + u32 id; + + n0 = rt3883_sysc_rr(RT3883_SYSC_REG_CHIPID0_3); + n1 = rt3883_sysc_rr(RT3883_SYSC_REG_CHIPID4_7); + id = rt3883_sysc_rr(RT3883_SYSC_REG_REVID); + + snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %c%c%c%c%c%c%c%c ver:%u eco:%u", + (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff), + (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff), + (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff), + (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff), + (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK, + (id & RT3883_REVID_ECO_ID_MASK)); +} + +static struct ramips_gpio_chip rt3883_gpio_chips[] = { + { + .chip = { + .label = "RT3883-GPIO0", + .base = 0, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x00, + [RAMIPS_GPIO_REG_EDGE] = 0x04, + [RAMIPS_GPIO_REG_RENA] = 0x08, + [RAMIPS_GPIO_REG_FENA] = 0x0c, + [RAMIPS_GPIO_REG_DATA] = 0x20, + [RAMIPS_GPIO_REG_DIR] = 0x24, + [RAMIPS_GPIO_REG_POL] = 0x28, + [RAMIPS_GPIO_REG_SET] = 0x2c, + [RAMIPS_GPIO_REG_RESET] = 0x30, + [RAMIPS_GPIO_REG_TOGGLE] = 0x34, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO1", + .base = 24, + .ngpio = 16, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x38, + [RAMIPS_GPIO_REG_EDGE] = 0x3c, + [RAMIPS_GPIO_REG_RENA] = 0x40, + [RAMIPS_GPIO_REG_FENA] = 0x44, + [RAMIPS_GPIO_REG_DATA] = 0x48, + [RAMIPS_GPIO_REG_DIR] = 0x4c, + [RAMIPS_GPIO_REG_POL] = 0x50, + [RAMIPS_GPIO_REG_SET] = 0x54, + [RAMIPS_GPIO_REG_RESET] = 0x58, + [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO2", + .base = 40, + .ngpio = 32, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x60, + [RAMIPS_GPIO_REG_EDGE] = 0x64, + [RAMIPS_GPIO_REG_RENA] = 0x68, + [RAMIPS_GPIO_REG_FENA] = 0x6c, + [RAMIPS_GPIO_REG_DATA] = 0x70, + [RAMIPS_GPIO_REG_DIR] = 0x74, + [RAMIPS_GPIO_REG_POL] = 0x78, + [RAMIPS_GPIO_REG_SET] = 0x7c, + [RAMIPS_GPIO_REG_RESET] = 0x80, + [RAMIPS_GPIO_REG_TOGGLE] = 0x84, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO3", + .base = 72, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x88, + [RAMIPS_GPIO_REG_EDGE] = 0x8c, + [RAMIPS_GPIO_REG_RENA] = 0x90, + [RAMIPS_GPIO_REG_FENA] = 0x94, + [RAMIPS_GPIO_REG_DATA] = 0x98, + [RAMIPS_GPIO_REG_DIR] = 0x9c, + [RAMIPS_GPIO_REG_POL] = 0xa0, + [RAMIPS_GPIO_REG_SET] = 0xa4, + [RAMIPS_GPIO_REG_RESET] = 0xa8, + [RAMIPS_GPIO_REG_TOGGLE] = 0xac, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, +}; + +static struct ramips_gpio_data rt3883_gpio_data = { + .chips = rt3883_gpio_chips, + .num_chips = ARRAY_SIZE(rt3883_gpio_chips), +}; + +static void rt3883_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt3883_gpio_init(u32 mode) +{ + u32 t; + + rt3883_sysc_wr(mode, RT3883_SYSC_REG_GPIO_MODE); + + ramips_gpio_init(&rt3883_gpio_data); + if ((mode & RT3883_GPIO_MODE_I2C) == 0) + rt3883_gpio_reserve(RT3883_GPIO_I2C_SD, RT3883_GPIO_I2C_SCLK); + + if ((mode & RT3883_GPIO_MODE_SPI) == 0) + rt3883_gpio_reserve(RT3883_GPIO_SPI_CS0, RT3883_GPIO_SPI_CLK); + + t = mode >> RT3883_GPIO_MODE_UART0_SHIFT; + t &= RT3883_GPIO_MODE_UART0_MASK; + switch (t) { + case RT3883_GPIO_MODE_UARTF: + case RT3883_GPIO_MODE_PCM_UARTF: + case RT3883_GPIO_MODE_PCM_I2S: + case RT3883_GPIO_MODE_I2S_UARTF: + rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_14); + break; + case RT3883_GPIO_MODE_PCM_GPIO: + rt3883_gpio_reserve(RT3883_GPIO_11, RT3883_GPIO_14); + break; + case RT3883_GPIO_MODE_GPIO_UARTF: + case RT3883_GPIO_MODE_GPIO_I2S: + rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_10); + break; + } + + if ((mode & RT3883_GPIO_MODE_UART1) == 0) + rt3883_gpio_reserve(RT3883_GPIO_UART1_TXD, + RT3883_GPIO_UART1_RXD); + + if ((mode & RT3883_GPIO_MODE_JTAG) == 0) + rt3883_gpio_reserve(RT3883_GPIO_JTAG_TDO, + RT3883_GPIO_JTAG_TCLK); + + if ((mode & RT3883_GPIO_MODE_MDIO) == 0) + rt3883_gpio_reserve(RT3883_GPIO_MDIO_MDC, + RT3883_GPIO_MDIO_MDIO); + + if ((mode & RT3883_GPIO_MODE_GE1) == 0) + rt3883_gpio_reserve(RT3883_GPIO_GE1_TXD0, + RT3883_GPIO_GE1_RXCLK); + + if ((mode & RT3883_GPIO_MODE_GE2) == 0) + rt3883_gpio_reserve(RT3883_GPIO_GE2_TXD0, + RT3883_GPIO_GE2_RXCLK); + + t = mode >> RT3883_GPIO_MODE_PCI_SHIFT; + t &= RT3883_GPIO_MODE_PCI_MASK; + if (t != RT3883_GPIO_MODE_PCI_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_PCI_AD0, + RT3883_GPIO_PCI_AD31); + + t = mode >> RT3883_GPIO_MODE_LNA_A_SHIFT; + t &= RT3883_GPIO_MODE_LNA_A_MASK; + if (t != RT3883_GPIO_MODE_LNA_A_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_A0, + RT3883_GPIO_LNA_PE_A2); + + t = mode >> RT3883_GPIO_MODE_LNA_G_SHIFT; + t &= RT3883_GPIO_MODE_LNA_G_MASK; + if (t != RT3883_GPIO_MODE_LNA_G_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_G0, + RT3883_GPIO_LNA_PE_G2); +} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/setup.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/setup.c new file mode 100644 index 0000000000..f4c7296fa4 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt3883/setup.c @@ -0,0 +1,89 @@ +/* + * Ralink RT3662/RT3883 SoC specific setup + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mips_machine.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include "common.h" + +static void rt3883_restart(char *command) +{ + rt3883_sysc_wr(RT3883_RSTCTRL_SYS, RT3883_SYSC_REG_RSTCTRL); + while (1) + if (cpu_wait) + cpu_wait(); +} + +static void rt3883_halt(void) +{ + while (1) + if (cpu_wait) + cpu_wait(); +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init ramips_soc_setup(void) +{ + struct clk *clk; + + rt3883_sysc_base = ioremap_nocache(RT3883_SYSC_BASE, PAGE_SIZE); + rt3883_memc_base = ioremap_nocache(RT3883_MEMC_BASE, PAGE_SIZE); + + rt3883_detect_sys_type(); + rt3883_clocks_init(); + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, + clk_get_rate(clk) / 1000000, + (clk_get_rate(clk) % 1000000) * 100 / 1000000); + + _machine_restart = rt3883_restart; + _machine_halt = rt3883_halt; + pm_power_off = rt3883_halt; + + clk = clk_get(NULL, "uart"); + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + + ramips_early_serial_setup(0, RT3883_UART0_BASE, clk_get_rate(clk), + RT3883_INTC_IRQ_UART0); + ramips_early_serial_setup(1, RT3883_UART1_BASE, clk_get_rate(clk), + RT3883_INTC_IRQ_UART1); +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +} diff --git a/target/linux/ramips/files/drivers/usb/host/ehci-rt3883.c b/target/linux/ramips/files/drivers/usb/host/ehci-rt3883.c new file mode 100644 index 0000000000..d22bd73b94 --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/ehci-rt3883.c @@ -0,0 +1,162 @@ +/* + * Bus Glue for the built-in EHCI controller of the Ralink RT3662/RT3883 SoCs + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_ehci_platform.h> + +static int ehci_rt3883_init(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int ret; + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + ehci->sbrn = 0x20; + + ehci_reset(ehci); + + ret = ehci_init(hcd); + if (ret) + return ret; + + ehci_port_power(ehci, 0); + + return 0; +} + +static const struct hc_driver ehci_rt3883_hc_driver = { + .description = hcd_name, + .product_desc = "Ralink RT3883 built-in EHCI controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + .reset = ehci_rt3883_init, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + .get_frame_number = ehci_get_frame, + + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_rt3883_probe(struct platform_device *pdev) +{ + struct rt3883_ehci_platform_data *pdata; + struct usb_hcd *hcd; + struct resource *res; + int irq; + int ret; + + if (usb_disabled()) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_dbg(&pdev->dev, "no IRQ specified for %s\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + irq = res->start; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "no base address specified for %s\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + hcd = usb_create_hcd(&ehci_rt3883_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + ret = -EBUSY; + goto err_put_hcd; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + ret = -EFAULT; + goto err_release_region; + } + + pdata = pdev->dev.platform_data; + if (pdata && pdata->start_hw) + pdata->start_hw(); + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) + goto err_iounmap; + + return 0; + +err_iounmap: + iounmap(hcd->regs); + +err_release_region: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_put_hcd: + usb_put_hcd(hcd); + return ret; +} + +static int ehci_rt3883_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct rt3883_ehci_platform_data *pdata; + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + + pdata = pdev->dev.platform_data; + if (pdata && pdata->stop_hw) + pdata->stop_hw(); + + return 0; +} + +static struct platform_driver ehci_rt3883_driver = { + .probe = ehci_rt3883_probe, + .remove = ehci_rt3883_remove, + .driver = { + .owner = THIS_MODULE, + .name = "rt3883-ehci", + } +}; + +MODULE_ALIAS("platform:rt3883-ehci"); diff --git a/target/linux/ramips/files/drivers/usb/host/ohci-rt3883.c b/target/linux/ramips/files/drivers/usb/host/ohci-rt3883.c new file mode 100644 index 0000000000..ea13aebe5e --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/ohci-rt3883.c @@ -0,0 +1,161 @@ +/* + * Bus Glue for the built-in OHCI controller of the Ralink RT3662/RT3883 SoCs + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_ohci_platform.h> + +static int __devinit ohci_rt3883_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + ret = ohci_init(ohci); + if (ret < 0) + return ret; + + ret = ohci_run(ohci); + if (ret < 0) + goto err; + + return 0; + +err: + ohci_stop(hcd); + return ret; +} + +static const struct hc_driver ohci_rt3883_hc_driver = { + .description = hcd_name, + .product_desc = "Ralink RT3883 built-in OHCI controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + .start = ohci_rt3883_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, + .start_port_reset = ohci_start_port_reset, +}; + +static int ohci_rt3883_probe(struct platform_device *pdev) +{ + struct rt3883_ohci_platform_data *pdata; + struct usb_hcd *hcd; + struct resource *res; + int irq; + int ret; + + if (usb_disabled()) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_dbg(&pdev->dev, "no IRQ specified for %s\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + irq = res->start; + + hcd = usb_create_hcd(&ohci_rt3883_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "no base address specified for %s\n", + dev_name(&pdev->dev)); + ret = -ENODEV; + goto err_put_hcd; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + ret = -EBUSY; + goto err_put_hcd; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + ret = -EFAULT; + goto err_release_region; + } + + pdata = pdev->dev.platform_data; + if (pdata && pdata->start_hw) + pdata->start_hw(); + + ohci_hcd_init(hcd_to_ohci(hcd)); + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) + goto err_stop_hcd; + + return 0; + +err_stop_hcd: + iounmap(hcd->regs); +err_release_region: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_put_hcd: + usb_put_hcd(hcd); + return ret; +} + +static int ohci_rt3883_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct rt3883_ohci_platform_data *pdata; + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + + pdata = pdev->dev.platform_data; + if (pdata && pdata->stop_hw) + pdata->stop_hw(); + + return 0; +} + +static struct platform_driver ohci_rt3883_driver = { + .probe = ohci_rt3883_probe, + .remove = ohci_rt3883_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "rt3883-ohci", + .owner = THIS_MODULE, + }, +}; + +MODULE_ALIAS("platform:rt3883-ohci"); diff --git a/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch b/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch new file mode 100644 index 0000000000..8150ee4810 --- /dev/null +++ b/target/linux/ramips/patches-2.6.39/002-fix-occassional-kernel-hangs.patch @@ -0,0 +1,104 @@ +From patchwork Tue Nov 8 14:59:01 2011 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: MIPS: Kernel hangs occasionally during boot. +Date: Tue, 08 Nov 2011 13:59:01 -0000 +From: Al Cooper <alcooperx@gmail.com> +X-Patchwork-Id: 2911 +Message-Id: <1320764341-4275-1-git-send-email-alcooperx@gmail.com> +To: ralf@linux-mips.org, linux-mips@linux-mips.org, + linux-kernel@vger.kernel.org +Cc: "Al Cooper" <alcooperx@gmail.com> + +The Kernel hangs occasionally during boot after +"Calibrating delay loop..". This is caused by the +c0_compare_int_usable() routine in cevt-r4k.c returning false which +causes the system to disable the timer and hang later. The false +return happens because the routine is using a series of four calls to +irq_disable_hazard() as a delay while it waits for the timer changes +to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, +the series of irq_disable_hazard() calls turn into ehb instructions and +can take as little as a few clock ticks for all 4 instructions. This +is not enough of a delay, so the routine thinks the timer is not working. +This fix uses up to a max number of cycle counter ticks for the delay +and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to +handle the hazard condition between cp0 writes and cp0 reads. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> + +--- +arch/mips/kernel/cevt-r4k.c | 38 +++++++++++++++++++------------------- + 1 files changed, 19 insertions(+), 19 deletions(-) + +--- a/arch/mips/kernel/cevt-r4k.c ++++ b/arch/mips/kernel/cevt-r4k.c +@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void) + + /* + * Compare interrupt can be routed and latched outside the core, +- * so a single execution hazard barrier may not be enough to give +- * it time to clear as seen in the Cause register. 4 time the +- * pipeline depth seems reasonably conservative, and empirically +- * works better in configurations with high CPU/bus clock ratios. ++ * so wait up to worst case number of cycle counter ticks for timer interrupt ++ * changes to propagate to the cause register. + */ +- +-#define compare_change_hazard() \ +- do { \ +- irq_disable_hazard(); \ +- irq_disable_hazard(); \ +- irq_disable_hazard(); \ +- irq_disable_hazard(); \ +- } while (0) ++#define COMPARE_INT_SEEN_TICKS 50 + + int c0_compare_int_usable(void) + { +@@ -126,8 +117,12 @@ int c0_compare_int_usable(void) + * IP7 already pending? Try to clear it by acking the timer. + */ + if (c0_compare_int_pending()) { +- write_c0_compare(read_c0_count()); +- compare_change_hazard(); ++ cnt = read_c0_count(); ++ write_c0_compare(cnt); ++ back_to_back_c0_hazard(); ++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) ++ if (!c0_compare_int_pending()) ++ break; + if (c0_compare_int_pending()) + return 0; + } +@@ -136,7 +131,7 @@ int c0_compare_int_usable(void) + cnt = read_c0_count(); + cnt += delta; + write_c0_compare(cnt); +- compare_change_hazard(); ++ back_to_back_c0_hazard(); + if ((int)(read_c0_count() - cnt) < 0) + break; + /* increase delta if the timer was already expired */ +@@ -145,12 +140,17 @@ int c0_compare_int_usable(void) + while ((int)(read_c0_count() - cnt) <= 0) + ; /* Wait for expiry */ + +- compare_change_hazard(); ++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) ++ if (c0_compare_int_pending()) ++ break; + if (!c0_compare_int_pending()) + return 0; +- +- write_c0_compare(read_c0_count()); +- compare_change_hazard(); ++ cnt = read_c0_count(); ++ write_c0_compare(cnt); ++ back_to_back_c0_hazard(); ++ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) ++ if (!c0_compare_int_pending()) ++ break; + if (c0_compare_int_pending()) + return 0; + diff --git a/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch index 59cc032938..07fa6632e7 100644 --- a/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch +++ b/target/linux/ramips/patches-2.6.39/101-rt288x_serial_driver_hack.patch @@ -68,8 +68,8 @@ cards. If unsure, say N. +config SERIAL_8250_RT288X -+ bool "Ralink RT288x/RT305x serial port support" -+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X) ++ bool "Ralink RT288x/RT305x/RT3883 serial port support" ++ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883) + help + If you have a Ralink RT288x/RT305x SoC based board and want to use the + serial port, say Y to this option. The driver can handle up to 2 serial diff --git a/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch index a32abb9e19..854fe0a8a5 100644 --- a/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch +++ b/target/linux/ramips/patches-2.6.39/104-ramips-watchdog-driver.patch @@ -6,7 +6,7 @@ +config RAMIPS_WDT + tristate "Ralink RT288X/RT305X Watchdog Timer" -+ depends on SOC_RT288X || SOC_RT305X ++ depends on SOC_RT288X || SOC_RT305X || SOC_RT3883 + help + Hardware driver for the built-in watchdog timer on the + Ralink RT288X/RT305X SoCs. diff --git a/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch b/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch new file mode 100644 index 0000000000..d01bd4702c --- /dev/null +++ b/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch @@ -0,0 +1,32 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -202,6 +202,15 @@ config USB_CNS3XXX_EHCI + It is needed for high-speed (480Mbit/sec) USB 2.0 device + support. + ++config USB_EHCI_RT3883 ++ bool "EHCI support for Ralink RT3662/RT3883 SoCs" ++ depends on USB_EHCI_HCD && SOC_RT3883 ++ select USB_EHCI_ROOT_HUB_TT ++ default y ++ ---help--- ++ Enables support for the built-in EHCI controller present ++ on the Ralink RT3883 SoC. ++ + config USB_OXU210HP_HCD + tristate "OXU210HP HCD support" + depends on USB +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1267,6 +1267,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER tegra_ehci_driver + #endif + ++#ifdef CONFIG_USB_EHCI_RT3883 ++#include "ehci-rt3883.c" ++#define PLATFORM_DRIVER ehci_rt3883_driver ++#endif ++ + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ + !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ + !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch b/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch new file mode 100644 index 0000000000..1415245364 --- /dev/null +++ b/target/linux/ramips/patches-2.6.39/201-rt3883-ohci-glue.patch @@ -0,0 +1,31 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -296,6 +296,14 @@ config USB_OHCI_HCD_OMAP3 + Enables support for the on-chip OHCI controller on + OMAP3 and later chips. + ++config USB_OHCI_RT3883 ++ bool "USB OHCI support for the Ralink RT3883 SoCs" ++ depends on USB_OHCI_HCD && SOC_RT3883 ++ default y ++ help ++ Enables support for the built-in OHCI controller present on the ++ Ralink RT3883 SoC. ++ + config USB_OHCI_HCD_PPC_SOC + bool "OHCI support for on-chip PPC USB controller" + depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) +--- a/drivers/usb/host/ohci-hcd.c ++++ b/drivers/usb/host/ohci-hcd.c +@@ -1107,6 +1107,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver + #endif + ++#ifdef CONFIG_USB_OHCI_RT3883 ++#include "ohci-rt3883.c" ++#define PLATFORM_DRIVER ohci_rt3883_driver ++#endif ++ + #if !defined(PCI_DRIVER) && \ + !defined(PLATFORM_DRIVER) && \ + !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/target/linux/ramips/patches-3.2/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-3.2/101-rt288x_serial_driver_hack.patch index 3ba1e53231..c393f19e7d 100644 --- a/target/linux/ramips/patches-3.2/101-rt288x_serial_driver_hack.patch +++ b/target/linux/ramips/patches-3.2/101-rt288x_serial_driver_hack.patch @@ -68,8 +68,8 @@ cards. If unsure, say N. +config SERIAL_8250_RT288X -+ bool "Ralink RT288x/RT305x serial port support" -+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X) ++ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" ++ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883) + help + If you have a Ralink RT288x/RT305x SoC based board and want to use the + serial port, say Y to this option. The driver can handle up to 2 serial diff --git a/target/linux/ramips/patches-3.2/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-3.2/104-ramips-watchdog-driver.patch index 293044dabd..430c7cf30e 100644 --- a/target/linux/ramips/patches-3.2/104-ramips-watchdog-driver.patch +++ b/target/linux/ramips/patches-3.2/104-ramips-watchdog-driver.patch @@ -6,7 +6,7 @@ +config RAMIPS_WDT + tristate "Ralink RT288X/RT305X Watchdog Timer" -+ depends on SOC_RT288X || SOC_RT305X ++ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883) + help + Hardware driver for the built-in watchdog timer on the + Ralink RT288X/RT305X SoCs. diff --git a/target/linux/ramips/patches-3.2/200-rt3883-ehci-glue.patch b/target/linux/ramips/patches-3.2/200-rt3883-ehci-glue.patch new file mode 100644 index 0000000000..db59785a2b --- /dev/null +++ b/target/linux/ramips/patches-3.2/200-rt3883-ehci-glue.patch @@ -0,0 +1,32 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -217,6 +217,15 @@ config USB_EHCI_ATH79 + Enables support for the built-in EHCI controller present + on the Atheros AR7XXX/AR9XXX SoCs. + ++config USB_EHCI_RT3883 ++ bool "EHCI support for Ralink RT3662/RT3883 SoCs" ++ depends on USB_EHCI_HCD && SOC_RT3883 ++ select USB_EHCI_ROOT_HUB_TT ++ default y ++ ---help--- ++ Enables support for the built-in EHCI controller present ++ on the Ralink RT3883 SoC. ++ + config USB_OXU210HP_HCD + tristate "OXU210HP HCD support" + depends on USB +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1329,6 +1329,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ehci_xls_driver + #endif + ++#ifdef CONFIG_USB_EHCI_RT3883 ++#include "ehci-rt3883.c" ++#define PLATFORM_DRIVER ehci_rt3883_driver ++#endif ++ + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ + !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ + !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/target/linux/ramips/patches-3.2/201-rt3883-ohci-glue.patch b/target/linux/ramips/patches-3.2/201-rt3883-ohci-glue.patch new file mode 100644 index 0000000000..e93da32122 --- /dev/null +++ b/target/linux/ramips/patches-3.2/201-rt3883-ohci-glue.patch @@ -0,0 +1,31 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -319,6 +319,14 @@ config USB_OHCI_ATH79 + Enables support for the built-in OHCI controller present on the + Atheros AR71XX/AR7240 SoCs. + ++config USB_OHCI_RT3883 ++ bool "USB OHCI support for the Ralink RT3883 SoCs" ++ depends on USB_OHCI_HCD && SOC_RT3883 ++ default y ++ help ++ Enables support for the built-in OHCI controller present on the ++ Ralink RT3883 SoC. ++ + config USB_OHCI_HCD_PPC_SOC + bool "OHCI support for on-chip PPC USB controller" + depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) +--- a/drivers/usb/host/ohci-hcd.c ++++ b/drivers/usb/host/ohci-hcd.c +@@ -1116,6 +1116,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ohci_xls_driver + #endif + ++#ifdef CONFIG_USB_OHCI_RT3883 ++#include "ohci-rt3883.c" ++#define PLATFORM_DRIVER ohci_rt3883_driver ++#endif ++ + #if !defined(PCI_DRIVER) && \ + !defined(PLATFORM_DRIVER) && \ + !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/target/linux/ramips/patches-3.2/301-rt3883-ehci-3.2-fix.patch b/target/linux/ramips/patches-3.2/301-rt3883-ehci-3.2-fix.patch new file mode 100644 index 0000000000..e2ba05dfff --- /dev/null +++ b/target/linux/ramips/patches-3.2/301-rt3883-ehci-3.2-fix.patch @@ -0,0 +1,11 @@ +--- a/drivers/usb/host/ehci-rt3883.c ++++ b/drivers/usb/host/ehci-rt3883.c +@@ -21,7 +21,7 @@ static int ehci_rt3883_init(struct usb_h + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + +- HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39 index d57bba9ecb..aaed397469 100644 --- a/target/linux/ramips/rt288x/config-2.6.39 +++ b/target/linux/ramips/rt288x/config-2.6.39 @@ -91,6 +91,7 @@ CONFIG_RALINK_DEV_GPIO_BUTTONS=y CONFIG_RALINK_DEV_GPIO_LEDS=y CONFIG_RALINK_RT288X=y # CONFIG_RALINK_RT305X is not set +# CONFIG_RALINK_RT3883 is not set # CONFIG_RAMIPS_ETH_DEBUG is not set CONFIG_RAMIPS_WDT=y CONFIG_RT288X_MACH_F5D8235_V1=y diff --git a/target/linux/ramips/rt288x/config-3.2 b/target/linux/ramips/rt288x/config-3.2 index 6c9a7b04f6..186950cab7 100644 --- a/target/linux/ramips/rt288x/config-3.2 +++ b/target/linux/ramips/rt288x/config-3.2 @@ -91,6 +91,7 @@ CONFIG_RALINK_DEV_GPIO_BUTTONS=y CONFIG_RALINK_DEV_GPIO_LEDS=y CONFIG_RALINK_RT288X=y # CONFIG_RALINK_RT305X is not set +# CONFIG_RALINK_RT3883 is not set # CONFIG_RAMIPS_ETH_DEBUG is not set CONFIG_RAMIPS_WDT=y CONFIG_RT288X_MACH_F5D8235_V1=y diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index 8842aa7faf..ab2bac9379 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -90,6 +90,7 @@ CONFIG_RALINK_DEV_GPIO_BUTTONS=y CONFIG_RALINK_DEV_GPIO_LEDS=y # CONFIG_RALINK_RT288X is not set CONFIG_RALINK_RT305X=y +# CONFIG_RALINK_RT3883 is not set # CONFIG_RAMIPS_ETH_DEBUG is not set CONFIG_RAMIPS_WDT=y CONFIG_RT305X_MACH_ALL0256N=y diff --git a/target/linux/ramips/rt305x/config-3.2 b/target/linux/ramips/rt305x/config-3.2 index 0bcafbf076..69989c89de 100644 --- a/target/linux/ramips/rt305x/config-3.2 +++ b/target/linux/ramips/rt305x/config-3.2 @@ -89,6 +89,7 @@ CONFIG_RALINK_DEV_GPIO_BUTTONS=y CONFIG_RALINK_DEV_GPIO_LEDS=y # CONFIG_RALINK_RT288X is not set CONFIG_RALINK_RT305X=y +# CONFIG_RALINK_RT3883 is not set # CONFIG_RAMIPS_ETH_DEBUG is not set CONFIG_RAMIPS_WDT=y CONFIG_RT305X_MACH_ALL0256N=y diff --git a/target/linux/ramips/rt3883/config-2.6.39 b/target/linux/ramips/rt3883/config-2.6.39 new file mode 100644 index 0000000000..b6d52ea4ec --- /dev/null +++ b/target/linux/ramips/rt3883/config-2.6.39 @@ -0,0 +1,112 @@ +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ATH79 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +# CONFIG_FSNOTIFY is not set +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HW_RANDOM=m +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQ_CPU=y +# CONFIG_LEDS_GPIO is not set +CONFIG_LOONGSON_UART_BASE=y +# CONFIG_MII is not set +# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set +CONFIG_MIPS=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +CONFIG_MIPS_MT_DISABLED=y +CONFIG_MIPS_RALINK=y +CONFIG_MIPS_RAMIPS_NET=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_QUOTACTL is not set +CONFIG_RALINK_DEV_GPIO_BUTTONS=y +CONFIG_RALINK_DEV_GPIO_LEDS=y +# CONFIG_RALINK_RT288X is not set +# CONFIG_RALINK_RT305X is not set +CONFIG_RALINK_RT3883=y +# CONFIG_RAMIPS_ETH_DEBUG is not set +CONFIG_RAMIPS_WDT=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_RT3883=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_TINY_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_SUPPORT=y +CONFIG_XZ_DEC=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/rt3883/config-3.2 b/target/linux/ramips/rt3883/config-3.2 new file mode 100644 index 0000000000..b62d99306c --- /dev/null +++ b/target/linux/ramips/rt3883/config-3.2 @@ -0,0 +1,109 @@ +# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ATH79 is not set +CONFIG_BCMA_POSSIBLE=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HW_RANDOM=m +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQ_CPU=y +CONFIG_IRQ_FORCED_THREADING=y +# CONFIG_LANTIQ is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_MII is not set +# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set +CONFIG_MIPS=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +CONFIG_MIPS_MT_DISABLED=y +CONFIG_MIPS_RALINK=y +CONFIG_MIPS_RAMIPS_NET=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_QUOTACTL is not set +CONFIG_RALINK_DEV_GPIO_BUTTONS=y +CONFIG_RALINK_DEV_GPIO_LEDS=y +# CONFIG_RALINK_RT288X is not set +# CONFIG_RALINK_RT305X is not set +CONFIG_RALINK_RT3883=y +# CONFIG_RAMIPS_ETH_DEBUG is not set +CONFIG_RAMIPS_WDT=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_RT3883=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_USB_ARCH_HAS_XHCI is not set +CONFIG_USB_SUPPORT=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XZ_DEC=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/rt3883/profiles/00-default.mk b/target/linux/ramips/rt3883/profiles/00-default.mk new file mode 100644 index 0000000000..1afecb7a74 --- /dev/null +++ b/target/linux/ramips/rt3883/profiles/00-default.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Default + NAME:=Default Profile + PACKAGES:= +endef + +define Profile/Default/Description + Default package set compatible with most boards. +endef +$(eval $(call Profile,Default)) diff --git a/target/linux/ramips/rt3883/target.mk b/target/linux/ramips/rt3883/target.mk new file mode 100644 index 0000000000..590bb98409 --- /dev/null +++ b/target/linux/ramips/rt3883/target.mk @@ -0,0 +1,11 @@ +# +# Copyright (C) 2011 OpenWrt.org +# + +SUBTARGET:=rt3883 +BOARDNAME:=RT3662/RT3883 based boards + +define Target/Description + Build firmware images for Ralink RT3662/RT3883 based boards. +endef + |