diff options
Diffstat (limited to 'target')
13 files changed, 1836 insertions, 0 deletions
diff --git a/target/linux/mvebu/config-3.19 b/target/linux/mvebu/config-3.19 new file mode 100644 index 0000000000..068d0fd064 --- /dev/null +++ b/target/linux/mvebu/config-3.19 @@ -0,0 +1,344 @@ +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MVEBU=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARM=y +CONFIG_ARMADA_370_CLK=y +CONFIG_ARMADA_370_XP_TIMER=y +CONFIG_ARMADA_38X_CLK=y +CONFIG_ARMADA_XP_CLK=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_GIC=y +CONFIG_ARM_HAS_SG_CHAIN=y +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_MVEBU_V7_CPUIDLE=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_VIRT_EXT=y +CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_BOUNCE=y +# CONFIG_CACHE_FEROCEON_L2 is not set +CONFIG_CACHE_L2X0=y +CONFIG_CACHE_PL310=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PJ4B=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +# CONFIG_CPU_THERMAL is not set +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_XZ=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" +CONFIG_DEBUG_MVEBU_UART=y +# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set +CONFIG_DEBUG_UART_8250=y +# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set +CONFIG_DEBUG_UART_8250_SHIFT=2 +# CONFIG_DEBUG_UART_8250_WORD is not set +CONFIG_DEBUG_UART_PHYS=0xd0012000 +# CONFIG_DEBUG_UART_PL01X is not set +CONFIG_DEBUG_UART_VIRT=0xfec12000 +CONFIG_DEBUG_UNCOMPRESS=y +CONFIG_DEBUG_USER=y +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_ENGINE_RAID=y +CONFIG_DMA_OF=y +CONFIG_DTC=y +# CONFIG_DW_DMAC_CORE is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_EARLY_PRINTK=y +CONFIG_FIXED_PHY=y +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_MVEBU=y +CONFIG_GPIO_MVEBU_PWM=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IOMMU_HELPER=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +# CONFIG_IWMMXT is not set +CONFIG_KERNFS=y +CONFIG_LEDS_GPIO=y +CONFIG_LIBFDT=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MACH_ARMADA_370=y +# CONFIG_MACH_ARMADA_375 is not set +CONFIG_MACH_ARMADA_38X=y +CONFIG_MACH_ARMADA_XP=y +# CONFIG_MACH_DOVE is not set +CONFIG_MACH_MVEBU_ANY=y +CONFIG_MACH_MVEBU_V7=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_MARVELL_PHY=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MEMORY=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_PXA3xx=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_SUPPORT=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_MVEBU_CLK_COMMON=y +CONFIG_MVEBU_CLK_COREDIV=y +CONFIG_MVEBU_CLK_CPU=y +CONFIG_MVEBU_DEVBUS=y +CONFIG_MVEBU_MBUS=y +CONFIG_MVMDIO=y +CONFIG_MVNETA=y +CONFIG_MVSW61XX_PHY=y +CONFIG_MV_XOR=y +CONFIG_NEED_DMA_MAP_STATE=y +# CONFIG_NEON is not set +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NO_BOOTMEM=y +CONFIG_NR_CPUS=4 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MVEBU=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_370=y +CONFIG_PINCTRL_ARMADA_38X=y +CONFIG_PINCTRL_ARMADA_XP=y +CONFIG_PINCTRL_MVEBU=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PJ4B_ERRATA_4742=y +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +CONFIG_PLAT_ORION=y +CONFIG_PM_OPP=y +CONFIG_PWM=y +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RCU_STALL_COMMON=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_MV is not set +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SCHED_HRTICK=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_DW=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SOC_BUS=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_ORION=y +CONFIG_STOP_MACHINE=y +CONFIG_SWCONFIG=y +CONFIG_SWIOTLB=y +CONFIG_SWP_EMULATE=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_STATS=y +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_XZ=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_XEN is not set +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch b/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch new file mode 100644 index 0000000000..1569c709b8 --- /dev/null +++ b/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -541,6 +541,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ + armada-xp-db.dtb \ + armada-xp-gp.dtb \ + armada-xp-lenovo-ix4-300d.dtb \ ++ armada-xp-mamba.dtb \ + armada-xp-matrix.dtb \ + armada-xp-netgear-rn2120.dtb \ + armada-xp-openblocks-ax3-4.dtb \ diff --git a/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch b/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch new file mode 100644 index 0000000000..e55eca3e04 --- /dev/null +++ b/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch @@ -0,0 +1,51 @@ +Document the binding for the TLC59116 LED driver. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + .../devicetree/bindings/leds/leds-tlc59116.txt | 40 ++++++++++++++++++++++ + 1 file changed, 40 insertions(+) + create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt +@@ -0,0 +1,40 @@ ++LEDs connected to tcl59116 ++ ++Required properties ++- compatible: should be "ti,tlc59116" ++- #address-cells: must be 1 ++- #size-cells: must be 0 ++- reg: typically 0x68 ++ ++Each led is represented as a sub-node of the ti,,tlc59116. ++See Documentation/devicetree/bindings/leds/common.txt ++ ++LED sub-node properties: ++- reg: number of LED line, 0 to 15 ++- label: (optional) name of LED ++- linux,default-trigger : (optional) ++ ++Examples: ++ ++tlc59116@68 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "ti,tlc59116"; ++ reg = <0x68>; ++ ++ wan@0 { ++ label = "wrt1900ac:amber:wan"; ++ reg = <0x0>; ++ }; ++ ++ 2g@2 { ++ label = "wrt1900ac:white:2g"; ++ reg = <0x2>; ++ }; ++ ++ alive@9 { ++ label = "wrt1900ac:green:alive"; ++ reg = <0x9>; ++ linux,default_trigger = "heartbeat"; ++ }; ++}; diff --git a/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch b/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch new file mode 100644 index 0000000000..6aa57a34fc --- /dev/null +++ b/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch @@ -0,0 +1,297 @@ +The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED +output has its own 8-bit fixed-frequency PWM controller to control the +brightness of the LED. + +This is based on a driver from Belkin, but has been extensively +rewritten. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + drivers/leds/Kconfig | 8 ++ + drivers/leds/Makefile | 1 + + drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 261 insertions(+) + create mode 100644 drivers/leds/leds-tlc59116.c + +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -457,6 +457,14 @@ config LEDS_TCA6507 + LED driver chips accessed via the I2C bus. + Driver support brightness control and hardware-assisted blinking. + ++config LEDS_TLC59116 ++ tristate "LED driver for TLC59116F controllers" ++ depends on LEDS_CLASS && I2C ++ select REGMAP_I2C ++ help ++ This option enables support for Texas Instruments TLC59116F ++ LED controller. ++ + config LEDS_MAX8997 + tristate "LED support for MAX8997 PMIC" + depends on LEDS_CLASS && MFD_MAX8997 +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp850 + obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o + obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o + obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o ++obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o + obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o + obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o + obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o +--- /dev/null ++++ b/drivers/leds/leds-tlc59116.c +@@ -0,0 +1,252 @@ ++/* ++ * Copyright 2014 Belkin Inc. ++ * Copyright 2014 Andrew Lunn <andrew@lunn.ch> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++ */ ++ ++#include <linux/i2c.h> ++#include <linux/leds.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/regmap.h> ++#include <linux/slab.h> ++#include <linux/workqueue.h> ++ ++#define TLC59116_LEDS 16 ++ ++#define TLC59116_REG_MODE1 0x00 ++#define MODE1_RESPON_ADDR_MASK 0xF0 ++#define MODE1_NORMAL_MODE (0 << 4) ++#define MODE1_SPEED_MODE (1 << 4) ++ ++#define TLC59116_REG_MODE2 0x01 ++#define MODE2_DIM (0 << 5) ++#define MODE2_BLINK (1 << 5) ++#define MODE2_OCH_STOP (0 << 3) ++#define MODE2_OCH_ACK (1 << 3) ++ ++#define TLC59116_REG_PWM(x) (0x02 + (x)) ++ ++#define TLC59116_REG_GRPPWM 0x12 ++#define TLC59116_REG_GRPFREQ 0x13 ++ ++/* LED Driver Output State, determine the source that drives LED outputs */ ++#define TLC59116_REG_LEDOUT(x) (0x14 + ((x) >> 2)) ++#define TLC59116_LED_OFF 0x0 /* Output LOW */ ++#define TLC59116_LED_ON 0x1 /* Output HI-Z */ ++#define TLC59116_DIM 0x2 /* Dimming */ ++#define TLC59116_BLINK 0x3 /* Blinking */ ++#define LED_MASK 0x3 ++ ++#define ldev_to_led(c) container_of(c, struct tlc59116_led, ldev) ++#define work_to_led(work) container_of(work, struct tlc59116_led, work) ++ ++struct tlc59116_led { ++ bool active; ++ struct regmap *regmap; ++ unsigned int led_no; ++ struct led_classdev ldev; ++ struct work_struct work; ++}; ++ ++struct tlc59116_priv { ++ struct tlc59116_led leds[TLC59116_LEDS]; ++}; ++ ++static int ++tlc59116_set_mode(struct regmap *regmap, u8 mode) ++{ ++ int err; ++ u8 val; ++ ++ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK)) ++ mode = MODE2_DIM; ++ ++ /* Configure MODE1 register */ ++ err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE); ++ if (err) ++ return err; ++ ++ /* Configure MODE2 Reg */ ++ val = MODE2_OCH_STOP | mode; ++ ++ return regmap_write(regmap, TLC59116_REG_MODE2, val); ++} ++ ++static int ++tlc59116_set_led(struct tlc59116_led *led, u8 val) ++{ ++ struct regmap *regmap = led->regmap; ++ unsigned int i = (led->led_no % 4) * 2; ++ unsigned int addr = TLC59116_REG_LEDOUT(led->led_no); ++ unsigned int mask = LED_MASK << i; ++ ++ val = val << i; ++ ++ return regmap_update_bits(regmap, addr, mask, val); ++} ++ ++static void ++tlc59116_led_work(struct work_struct *work) ++{ ++ struct tlc59116_led *led = work_to_led(work); ++ struct regmap *regmap = led->regmap; ++ int err; ++ u8 pwm; ++ ++ pwm = TLC59116_REG_PWM(led->led_no); ++ err = regmap_write(regmap, pwm, led->ldev.brightness); ++ if (err) ++ dev_err(led->ldev.dev, "Failed setting brightness\n"); ++} ++ ++static void ++tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ struct tlc59116_led *led = ldev_to_led(led_cdev); ++ ++ led->ldev.brightness = value; ++ schedule_work(&led->work); ++} ++ ++static void ++tlc59116_destroy_devices(struct tlc59116_priv *priv, unsigned int i) ++{ ++ while (--i >= 0) { ++ if (priv->leds[i].active) { ++ led_classdev_unregister(&priv->leds[i].ldev); ++ cancel_work_sync(&priv->leds[i].work); ++ } ++ } ++} ++ ++static int ++tlc59116_configure(struct device *dev, ++ struct tlc59116_priv *priv, ++ struct regmap *regmap) ++{ ++ unsigned int i; ++ int err = 0; ++ ++ tlc59116_set_mode(regmap, MODE2_DIM); ++ for (i = 0; i < TLC59116_LEDS; i++) { ++ struct tlc59116_led *led = &priv->leds[i]; ++ ++ if (!led->active) ++ continue; ++ ++ led->regmap = regmap; ++ led->led_no = i; ++ led->ldev.brightness_set = tlc59116_led_set; ++ led->ldev.max_brightness = LED_FULL; ++ INIT_WORK(&led->work, tlc59116_led_work); ++ err = led_classdev_register(dev, &led->ldev); ++ if (err < 0) { ++ dev_err(dev, "couldn't register LED %s\n", ++ led->ldev.name); ++ goto exit; ++ } ++ tlc59116_set_led(led, TLC59116_DIM); ++ } ++ ++ return 0; ++ ++exit: ++ tlc59116_destroy_devices(priv, i); ++ return err; ++} ++ ++static const struct regmap_config tlc59116_regmap = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ .max_register = 0x1e, ++}; ++ ++static int ++tlc59116_probe(struct i2c_client *client, ++ const struct i2c_device_id *id) ++{ ++ struct tlc59116_priv *priv = i2c_get_clientdata(client); ++ struct device *dev = &client->dev; ++ struct device_node *np = client->dev.of_node, *child; ++ struct regmap *regmap; ++ int err, count, reg; ++ ++ count = of_get_child_count(np); ++ if (!count || count > TLC59116_LEDS) ++ return -EINVAL; ++ ++ if (!i2c_check_functionality(client->adapter, ++ I2C_FUNC_SMBUS_BYTE_DATA)) ++ return -EIO; ++ ++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ regmap = devm_regmap_init_i2c(client, &tlc59116_regmap); ++ if (IS_ERR(regmap)) { ++ err = PTR_ERR(regmap); ++ dev_err(dev, "Failed to allocate register map: %d\n", err); ++ return err; ++ } ++ ++ i2c_set_clientdata(client, priv); ++ ++ for_each_child_of_node(np, child) { ++ err = of_property_read_u32(child, "reg", ®); ++ if (err) ++ return err; ++ if (reg < 0 || reg >= TLC59116_LEDS) ++ return -EINVAL; ++ if (priv->leds[reg].active) ++ return -EINVAL; ++ priv->leds[reg].active = true; ++ priv->leds[reg].ldev.name = ++ of_get_property(child, "label", NULL) ? : child->name; ++ priv->leds[reg].ldev.default_trigger = ++ of_get_property(child, "linux,default-trigger", NULL); ++ } ++ return tlc59116_configure(dev, priv, regmap); ++} ++ ++static int ++tlc59116_remove(struct i2c_client *client) ++{ ++ struct tlc59116_priv *priv = i2c_get_clientdata(client); ++ ++ tlc59116_destroy_devices(priv, TLC59116_LEDS); ++ ++ return 0; ++} ++ ++static const struct of_device_id of_tlc59116_leds_match[] = { ++ { .compatible = "ti,tlc59116", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match); ++ ++static const struct i2c_device_id tlc59116_id[] = { ++ { "tlc59116" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(i2c, tlc59116_id); ++ ++static struct i2c_driver tlc59116_driver = { ++ .driver = { ++ .name = "tlc59116", ++ .of_match_table = of_match_ptr(of_tlc59116_leds_match), ++ }, ++ .probe = tlc59116_probe, ++ .remove = tlc59116_remove, ++ .id_table = tlc59116_id, ++}; ++ ++module_i2c_driver(tlc59116_driver); ++ ++MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("TLC59116 LED driver"); diff --git a/target/linux/mvebu/patches-3.19/100-find_active_root.patch b/target/linux/mvebu/patches-3.19/100-find_active_root.patch new file mode 100644 index 0000000000..68826fc4e1 --- /dev/null +++ b/target/linux/mvebu/patches-3.19/100-find_active_root.patch @@ -0,0 +1,153 @@ +The WRT1900AC among other Linksys routers uses a dual-firmware layout. +The bootloader passes the active rootfs in bootargs and also sets the +rootfstype to jffs2 - which is clearly something we don't want. + +Rename both root= and rootfstype= variables to avoid issues and also +use the former to dynamically rename the active partition to "ubi". + + +Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + +--- a/arch/arm/boot/compressed/atags_to_fdt.c ++++ b/arch/arm/boot/compressed/atags_to_fdt.c +@@ -66,6 +66,18 @@ static uint32_t get_cell_size(const void + return cell_size; + } + ++static void mangle_bootargs(void *fdt, const char *fdt_cmdline) ++{ ++ char *rootdev; ++ char *rootfs; ++ ++ rootdev = strstr(fdt_cmdline, "root=/dev/mtdblock"); ++ strncpy(rootdev, "uboot_active_root=", 18); ++ ++ rootfs = strstr(fdt_cmdline, "rootfstype"); ++ strncpy(rootfs, "origfstype", 10); ++} ++ + static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) + { + char cmdline[COMMAND_LINE_SIZE]; +@@ -135,6 +147,9 @@ int atags_to_fdt(void *atag_list, void * + + for_each_tag(atag, atag_list) { + if (atag->hdr.tag == ATAG_CMDLINE) { ++ /* Rename the original root= and rootfstype= options */ ++ mangle_bootargs(fdt, ++ atag->u.cmdline.cmdline); + /* Append the ATAGS command line to the device tree + * command line. + * NB: This means that if the same parameter is set in +--- a/arch/arm/boot/compressed/string.c ++++ b/arch/arm/boot/compressed/string.c +@@ -111,6 +111,53 @@ char *strchr(const char *s, int c) + return (char *)s; + } + ++/** ++ * strncpy - Copy a length-limited, %NUL-terminated string ++ * @dest: Where to copy the string to ++ * @src: Where to copy the string from ++ * @count: The maximum number of bytes to copy ++ * ++ * The result is not %NUL-terminated if the source exceeds ++ * @count bytes. ++ * ++ * In the case where the length of @src is less than that of ++ * count, the remainder of @dest will be padded with %NUL. ++ * ++ */ ++char *strncpy(char *dest, const char *src, size_t count) ++{ ++ char *tmp = dest; ++ ++ while (count) { ++ if ((*tmp = *src) != 0) ++ src++; ++ tmp++; ++ count--; ++ } ++ return dest; ++} ++ ++/** ++ * strstr - Find the first substring in a %NUL terminated string ++ * @s1: The string to be searched ++ * @s2: The string to search for ++ */ ++char *strstr(const char *s1, const char *s2) ++{ ++ size_t l1, l2; ++ ++ l2 = strlen(s2); ++ if (!l2) ++ return (char *)s1; ++ l1 = strlen(s1); ++ while (l1 >= l2) { ++ l1--; ++ if (!memcmp(s1, s2, l2)) ++ return (char *)s1; ++ s1++; ++ } ++ return NULL; ++} + #undef memset + + void *memset(void *s, int c, size_t count) +--- a/drivers/mtd/ofpart.c ++++ b/drivers/mtd/ofpart.c +@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d + return of_get_property(pp, "compatible", NULL); + } + ++static int uboot_active_root; ++ + static int parse_ofpart_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + struct mtd_part_parser_data *data) + { + struct device_node *node; + const char *partname; ++ const char *owrtpart = "ubi"; + struct device_node *pp; + int nr_parts, i; + +@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc + (*pparts)[i].offset = of_read_number(reg, a_cells); + (*pparts)[i].size = of_read_number(reg + a_cells, s_cells); + +- partname = of_get_property(pp, "label", &len); +- if (!partname) +- partname = of_get_property(pp, "name", &len); ++ if (uboot_active_root && (i == uboot_active_root)) { ++ partname = owrtpart; ++ } else { ++ partname = of_get_property(pp, "label", &len); ++ ++ if (!partname) ++ partname = of_get_property(pp, "name", &len); ++ } ++ + (*pparts)[i].name = partname; + + if (of_get_property(pp, "read-only", &len)) +@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi + return 0; + } + ++static int __init active_root(char *str) ++{ ++ get_option(&str, &uboot_active_root); ++ ++ if (!uboot_active_root) ++ return 1; ++ ++ return 1; ++} ++ ++__setup("uboot_active_root=", active_root); ++ + static void __exit ofpart_parser_exit(void) + { + deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch new file mode 100644 index 0000000000..02e913e30b --- /dev/null +++ b/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch @@ -0,0 +1,15 @@ +--- a/arch/arm/boot/dts/armada-xp.dtsi ++++ b/arch/arm/boot/dts/armada-xp.dtsi +@@ -54,12 +54,10 @@ + }; + + i2c0: i2c@11000 { +- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; + }; + + i2c1: i2c@11100 { +- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; + }; + diff --git a/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch b/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch new file mode 100644 index 0000000000..844df4f6f5 --- /dev/null +++ b/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch @@ -0,0 +1,223 @@ +Wrap some long lines. +Prefer seq_puts() over seq_printf(). +space to tab conversions. +Spelling error fix. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + drivers/gpio/gpio-mvebu.c | 77 ++++++++++++++++++++++++++--------------------- + 1 file changed, 42 insertions(+), 35 deletions(-) + +--- a/drivers/gpio/gpio-mvebu.c ++++ b/drivers/gpio/gpio-mvebu.c +@@ -59,7 +59,7 @@ + #define GPIO_LEVEL_MASK_OFF 0x001c + + /* The MV78200 has per-CPU registers for edge mask and level mask */ +-#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) ++#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) + #define GPIO_LEVEL_MASK_MV78200_OFF(cpu) ((cpu) ? 0x34 : 0x1C) + + /* The Armada XP has per-CPU registers for interrupt cause, interrupt +@@ -69,11 +69,11 @@ + #define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu) (0x10 + (cpu) * 0x4) + #define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4) + +-#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1 +-#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2 ++#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1 ++#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2 + #define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3 + +-#define MVEBU_MAX_GPIO_PER_BANK 32 ++#define MVEBU_MAX_GPIO_PER_BANK 32 + + struct mvebu_gpio_chip { + struct gpio_chip chip; +@@ -82,9 +82,9 @@ struct mvebu_gpio_chip { + void __iomem *percpu_membase; + int irqbase; + struct irq_domain *domain; +- int soc_variant; ++ int soc_variant; + +- /* Used to preserve GPIO registers accross suspend/resume */ ++ /* Used to preserve GPIO registers across suspend/resume */ + u32 out_reg; + u32 io_conf_reg; + u32 blink_en_reg; +@@ -107,7 +107,8 @@ static inline void __iomem *mvebu_gpiore + return mvchip->membase + GPIO_BLINK_EN_OFF; + } + +-static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) ++static inline void __iomem * ++mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) + { + return mvchip->membase + GPIO_IO_CONF_OFF; + } +@@ -117,12 +118,14 @@ static inline void __iomem *mvebu_gpiore + return mvchip->membase + GPIO_IN_POL_OFF; + } + +-static inline void __iomem *mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip) ++static inline void __iomem * ++mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip) + { + return mvchip->membase + GPIO_DATA_IN_OFF; + } + +-static inline void __iomem *mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip) ++static inline void __iomem * ++mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip) + { + int cpu; + +@@ -132,13 +135,15 @@ static inline void __iomem *mvebu_gpiore + return mvchip->membase + GPIO_EDGE_CAUSE_OFF; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); +- return mvchip->percpu_membase + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu); ++ return mvchip->percpu_membase + ++ GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu); + default: + BUG(); + } + } + +-static inline void __iomem *mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip) ++static inline void __iomem * ++mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip) + { + int cpu; + +@@ -150,7 +155,8 @@ static inline void __iomem *mvebu_gpiore + return mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(cpu); + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); +- return mvchip->percpu_membase + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu); ++ return mvchip->percpu_membase + ++ GPIO_EDGE_MASK_ARMADAXP_OFF(cpu); + default: + BUG(); + } +@@ -168,7 +174,8 @@ static void __iomem *mvebu_gpioreg_level + return mvchip->membase + GPIO_LEVEL_MASK_MV78200_OFF(cpu); + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); +- return mvchip->percpu_membase + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu); ++ return mvchip->percpu_membase + ++ GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu); + default: + BUG(); + } +@@ -364,22 +371,22 @@ static void mvebu_gpio_level_irq_unmask( + * value of the line or the opposite value. + * + * Level IRQ handlers: DATA_IN is used directly as cause register. +- * Interrupt are masked by LEVEL_MASK registers. ++ * Interrupt are masked by LEVEL_MASK registers. + * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. +- * Interrupt are masked by EDGE_MASK registers. ++ * Interrupt are masked by EDGE_MASK registers. + * Both-edge handlers: Similar to regular Edge handlers, but also swaps +- * the polarity to catch the next line transaction. +- * This is a race condition that might not perfectly +- * work on some use cases. ++ * the polarity to catch the next line transaction. ++ * This is a race condition that might not perfectly ++ * work on some use cases. + * + * Every eight GPIO lines are grouped (OR'ed) before going up to main + * cause register. + * +- * EDGE cause mask +- * data-in /--------| |-----| |----\ +- * -----| |----- ---- to main cause reg +- * X \----------------| |----/ +- * polarity LEVEL mask ++ * EDGE cause mask ++ * data-in /--------| |-----| |----\ ++ * -----| |----- ---- to main cause reg ++ * X \----------------| |----/ ++ * polarity LEVEL mask + * + ****************************************************************************/ + +@@ -394,9 +401,8 @@ static int mvebu_gpio_irq_set_type(struc + pin = d->hwirq; + + u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin); +- if (!u) { ++ if (!u) + return -EINVAL; +- } + + type &= IRQ_TYPE_SENSE_MASK; + if (type == IRQ_TYPE_NONE) +@@ -529,13 +535,13 @@ static void mvebu_gpio_dbg_show(struct s + (data_in ^ in_pol) & msk ? "hi" : "lo", + in_pol & msk ? "lo" : "hi"); + if (!((edg_msk | lvl_msk) & msk)) { +- seq_printf(s, " disabled\n"); ++ seq_puts(s, " disabled\n"); + continue; + } + if (edg_msk & msk) +- seq_printf(s, " edge "); ++ seq_puts(s, " edge "); + if (lvl_msk & msk) +- seq_printf(s, " level"); ++ seq_puts(s, " level"); + seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear "); + } + } +@@ -546,15 +552,15 @@ static void mvebu_gpio_dbg_show(struct s + static const struct of_device_id mvebu_gpio_of_match[] = { + { + .compatible = "marvell,orion-gpio", +- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, ++ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, + }, + { + .compatible = "marvell,mv78200-gpio", +- .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200, ++ .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200, + }, + { + .compatible = "marvell,armadaxp-gpio", +- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, ++ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, + }, + { + /* sentinel */ +@@ -668,7 +674,8 @@ static int mvebu_gpio_probe(struct platf + else + soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION; + +- mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL); ++ mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), ++ GFP_KERNEL); + if (!mvchip) + return -ENOMEM; + +@@ -767,8 +774,8 @@ static int mvebu_gpio_probe(struct platf + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + for (i = 0; i < 4; i++) { +- int irq; +- irq = platform_get_irq(pdev, i); ++ int irq = platform_get_irq(pdev, i); ++ + if (irq < 0) + continue; + irq_set_handler_data(irq, mvchip); +@@ -827,7 +834,7 @@ static int mvebu_gpio_probe(struct platf + + static struct platform_driver mvebu_gpio_driver = { + .driver = { +- .name = "mvebu-gpio", ++ .name = "mvebu-gpio", + .of_match_table = mvebu_gpio_of_match, + }, + .probe = mvebu_gpio_probe, diff --git a/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch b/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch new file mode 100644 index 0000000000..aecf8e3c12 --- /dev/null +++ b/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch @@ -0,0 +1,63 @@ +Ensure that when there is an error during probe that the gpiochip is +removed and the generic irq chip is removed. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + drivers/gpio/gpio-mvebu.c | 23 +++++++++++++++++------ + 1 file changed, 17 insertions(+), 6 deletions(-) + +--- a/drivers/gpio/gpio-mvebu.c ++++ b/drivers/gpio/gpio-mvebu.c +@@ -667,6 +667,7 @@ static int mvebu_gpio_probe(struct platf + unsigned int ngpios; + int soc_variant; + int i, cpu, id; ++ int err; + + match = of_match_device(mvebu_gpio_of_match, &pdev->dev); + if (match) +@@ -785,14 +786,16 @@ static int mvebu_gpio_probe(struct platf + mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); + if (mvchip->irqbase < 0) { + dev_err(&pdev->dev, "no irqs\n"); +- return mvchip->irqbase; ++ err = mvchip->irqbase; ++ goto err_gpiochip_add; + } + + gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase, + mvchip->membase, handle_level_irq); + if (!gc) { + dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); +- return -ENOMEM; ++ err = -ENOMEM; ++ goto err_gpiochip_add; + } + + gc->private = mvchip; +@@ -823,13 +826,21 @@ static int mvebu_gpio_probe(struct platf + if (!mvchip->domain) { + dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", + mvchip->chip.label); +- irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, +- IRQ_LEVEL | IRQ_NOPROBE); +- kfree(gc); +- return -ENODEV; ++ err = -ENODEV; ++ goto err_generic_chip; + } + + return 0; ++ ++err_generic_chip: ++ irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, ++ IRQ_LEVEL | IRQ_NOPROBE); ++ kfree(gc); ++ ++err_gpiochip_add: ++ gpiochip_remove(&mvchip->chip); ++ ++ return err; + } + + static struct platform_driver mvebu_gpio_driver = { diff --git a/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch b/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch new file mode 100644 index 0000000000..19376f82b5 --- /dev/null +++ b/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch @@ -0,0 +1,433 @@ +Armada 370/XP devices can 'blink' gpio lines with a configurable on +and off period. This can be modelled as a PWM. + +However, there are only two sets of PWM configuration registers for +all the gpio lines. This driver simply allows a single gpio line per +gpio chip of 32 lines to be used as a PWM. Attempts to use more return +EBUSY. + +Due to the interleaving of registers it is not simple to separate the +PWM driver from the gpio driver. Thus the gpio driver has been +extended with a PWM driver. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + drivers/gpio/Kconfig | 5 ++ + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-mvebu-pwm.c | 202 ++++++++++++++++++++++++++++++++++++++++++ + drivers/gpio/gpio-mvebu.c | 37 +++----- + drivers/gpio/gpio-mvebu.h | 79 +++++++++++++++++ + 5 files changed, 299 insertions(+), 25 deletions(-) + create mode 100644 drivers/gpio/gpio-mvebu-pwm.c + create mode 100644 drivers/gpio/gpio-mvebu.h + +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -239,6 +239,11 @@ config GPIO_MVEBU + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + ++config GPIO_MVEBU_PWM ++ def_bool y ++ depends on GPIO_MVEBU ++ depends on PWM ++ + config GPIO_MXC + def_bool y + depends on ARCH_MXC +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -60,6 +60,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o + obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o + obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o + obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o ++obj-$(CONFIG_GPIO_MVEBU_PWM) += gpio-mvebu-pwm.o + obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o + obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o + obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o +--- /dev/null ++++ b/drivers/gpio/gpio-mvebu-pwm.c +@@ -0,0 +1,202 @@ ++#include <linux/err.h> ++#include <linux/module.h> ++#include <linux/gpio.h> ++#include <linux/pwm.h> ++#include <linux/clk.h> ++#include <linux/platform_device.h> ++#include "gpio-mvebu.h" ++#include "gpiolib.h" ++ ++static void __iomem *mvebu_gpioreg_blink_select(struct mvebu_gpio_chip *mvchip) ++{ ++ return mvchip->membase + GPIO_BLINK_CNT_SELECT; ++} ++ ++static inline struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip) ++{ ++ return container_of(chip, struct mvebu_pwm, chip); ++} ++ ++static inline struct mvebu_gpio_chip *to_mvchip(struct mvebu_pwm *pwm) ++{ ++ return container_of(pwm, struct mvebu_gpio_chip, pwm); ++} ++ ++static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwmd) ++{ ++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); ++ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); ++ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm); ++ unsigned long flags; ++ int ret = 0; ++ ++ spin_lock_irqsave(&pwm->lock, flags); ++ if (pwm->used) { ++ ret = -EBUSY; ++ } else { ++ if (!desc) { ++ ret = -ENODEV; ++ goto out; ++ } ++ ret = gpiod_request(desc, "mvebu-pwm"); ++ if (ret) ++ goto out; ++ ++ ret = gpiod_direction_output(desc, 0); ++ if (ret) { ++ gpiod_free(desc); ++ goto out; ++ } ++ ++ pwm->pin = pwmd->pwm - mvchip->chip.base; ++ pwm->used = true; ++ } ++ ++out: ++ spin_unlock_irqrestore(&pwm->lock, flags); ++ return ret; ++} ++ ++static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwmd) ++{ ++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); ++ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&pwm->lock, flags); ++ gpiod_free(desc); ++ pwm->used = false; ++ spin_unlock_irqrestore(&pwm->lock, flags); ++} ++ ++static int mvebu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwmd, ++ int duty_ns, int period_ns) ++{ ++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); ++ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); ++ unsigned int on, off; ++ unsigned long long val; ++ u32 u; ++ ++ val = (unsigned long long) pwm->clk_rate * duty_ns; ++ do_div(val, NSEC_PER_SEC); ++ if (val > UINT_MAX) ++ return -EINVAL; ++ if (val) ++ on = val; ++ else ++ on = 1; ++ ++ val = (unsigned long long) pwm->clk_rate * (period_ns - duty_ns); ++ do_div(val, NSEC_PER_SEC); ++ if (val > UINT_MAX) ++ return -EINVAL; ++ if (val) ++ off = val; ++ else ++ off = 1; ++ ++ u = readl_relaxed(mvebu_gpioreg_blink_select(mvchip)); ++ u &= ~(1 << pwm->pin); ++ u |= (pwm->id << pwm->pin); ++ writel_relaxed(u, mvebu_gpioreg_blink_select(mvchip)); ++ ++ writel_relaxed(on, pwm->membase + BLINK_ON_DURATION); ++ writel_relaxed(off, pwm->membase + BLINK_OFF_DURATION); ++ ++ return 0; ++} ++ ++static int mvebu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwmd) ++{ ++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); ++ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); ++ ++ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 1); ++ ++ return 0; ++} ++ ++static void mvebu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwmd) ++{ ++ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); ++ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); ++ ++ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 0); ++} ++ ++static const struct pwm_ops mvebu_pwm_ops = { ++ .request = mvebu_pwm_request, ++ .free = mvebu_pwm_free, ++ .config = mvebu_pwm_config, ++ .enable = mvebu_pwm_enable, ++ .disable = mvebu_pwm_disable, ++ .owner = THIS_MODULE, ++}; ++ ++void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) ++{ ++ struct mvebu_pwm *pwm = &mvchip->pwm; ++ ++ pwm->blink_select = readl_relaxed(mvebu_gpioreg_blink_select(mvchip)); ++ pwm->blink_on_duration = ++ readl_relaxed(pwm->membase + BLINK_ON_DURATION); ++ pwm->blink_off_duration = ++ readl_relaxed(pwm->membase + BLINK_OFF_DURATION); ++} ++ ++void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) ++{ ++ struct mvebu_pwm *pwm = &mvchip->pwm; ++ ++ writel_relaxed(pwm->blink_select, mvebu_gpioreg_blink_select(mvchip)); ++ writel_relaxed(pwm->blink_on_duration, ++ pwm->membase + BLINK_ON_DURATION); ++ writel_relaxed(pwm->blink_off_duration, ++ pwm->membase + BLINK_OFF_DURATION); ++} ++ ++/* ++ * Armada 370/XP has simple PWM support for gpio lines. Other SoCs ++ * don't have this hardware. So if we don't have the necessary ++ * resource, it is not an error. ++ */ ++int mvebu_pwm_probe(struct platform_device *pdev, ++ struct mvebu_gpio_chip *mvchip, ++ int id) ++{ ++ struct device *dev = &pdev->dev; ++ struct mvebu_pwm *pwm = &mvchip->pwm; ++ struct resource *res; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"); ++ if (!res) ++ return 0; ++ ++ mvchip->pwm.membase = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(mvchip->pwm.membase)) ++ return PTR_ERR(mvchip->percpu_membase); ++ ++ if (id < 0 || id > 1) ++ return -EINVAL; ++ pwm->id = id; ++ ++ if (IS_ERR(mvchip->clk)) ++ return PTR_ERR(mvchip->clk); ++ ++ pwm->clk_rate = clk_get_rate(mvchip->clk); ++ if (!pwm->clk_rate) { ++ dev_err(dev, "failed to get clock rate\n"); ++ return -EINVAL; ++ } ++ ++ pwm->chip.dev = dev; ++ pwm->chip.ops = &mvebu_pwm_ops; ++ pwm->chip.base = mvchip->chip.base; ++ pwm->chip.npwm = mvchip->chip.ngpio; ++ pwm->chip.can_sleep = false; ++ ++ spin_lock_init(&pwm->lock); ++ ++ return pwmchip_add(&pwm->chip); ++} +--- a/drivers/gpio/gpio-mvebu.c ++++ b/drivers/gpio/gpio-mvebu.c +@@ -42,10 +42,11 @@ + #include <linux/io.h> + #include <linux/of_irq.h> + #include <linux/of_device.h> ++#include <linux/pwm.h> + #include <linux/clk.h> + #include <linux/pinctrl/consumer.h> + #include <linux/irqchip/chained_irq.h> +- ++#include "gpio-mvebu.h" + /* + * GPIO unit register offsets. + */ +@@ -75,24 +76,6 @@ + + #define MVEBU_MAX_GPIO_PER_BANK 32 + +-struct mvebu_gpio_chip { +- struct gpio_chip chip; +- spinlock_t lock; +- void __iomem *membase; +- void __iomem *percpu_membase; +- int irqbase; +- struct irq_domain *domain; +- int soc_variant; +- +- /* Used to preserve GPIO registers across suspend/resume */ +- u32 out_reg; +- u32 io_conf_reg; +- u32 blink_en_reg; +- u32 in_pol_reg; +- u32 edge_mask_regs[4]; +- u32 level_mask_regs[4]; +-}; +- + /* + * Functions returning addresses of individual registers for a given + * GPIO controller. +@@ -228,7 +211,7 @@ static int mvebu_gpio_get(struct gpio_ch + return (u >> pin) & 1; + } + +-static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) ++void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) + { + struct mvebu_gpio_chip *mvchip = + container_of(chip, struct mvebu_gpio_chip, chip); +@@ -609,6 +592,8 @@ static int mvebu_gpio_suspend(struct pla + BUG(); + } + ++ mvebu_pwm_suspend(mvchip); ++ + return 0; + } + +@@ -652,6 +637,8 @@ static int mvebu_gpio_resume(struct plat + BUG(); + } + ++ mvebu_pwm_resume(mvchip); ++ + return 0; + } + +@@ -663,7 +650,6 @@ static int mvebu_gpio_probe(struct platf + struct resource *res; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; +- struct clk *clk; + unsigned int ngpios; + int soc_variant; + int i, cpu, id; +@@ -693,10 +679,10 @@ static int mvebu_gpio_probe(struct platf + return id; + } + +- clk = devm_clk_get(&pdev->dev, NULL); ++ mvchip->clk = devm_clk_get(&pdev->dev, NULL); + /* Not all SoCs require a clock.*/ +- if (!IS_ERR(clk)) +- clk_prepare_enable(clk); ++ if (!IS_ERR(mvchip->clk)) ++ clk_prepare_enable(mvchip->clk); + + mvchip->soc_variant = soc_variant; + mvchip->chip.label = dev_name(&pdev->dev); +@@ -830,7 +816,8 @@ static int mvebu_gpio_probe(struct platf + goto err_generic_chip; + } + +- return 0; ++ /* Armada 370/XP has simple PWM support for gpio lines */ ++ return mvebu_pwm_probe(pdev, mvchip, id); + + err_generic_chip: + irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, +--- /dev/null ++++ b/drivers/gpio/gpio-mvebu.h +@@ -0,0 +1,79 @@ ++/* ++ * Interface between MVEBU GPIO driver and PWM driver for GPIO pins ++ * ++ * Copyright (C) 2015, Andrew Lunn <andrew@lunn.ch> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef MVEBU_GPIO_PWM_H ++#define MVEBU_GPIO_PWM_H ++ ++#define BLINK_ON_DURATION 0x0 ++#define BLINK_OFF_DURATION 0x4 ++#define GPIO_BLINK_CNT_SELECT 0x0020 ++ ++struct mvebu_pwm { ++ void __iomem *membase; ++ unsigned long clk_rate; ++ bool used; ++ unsigned pin; ++ struct pwm_chip chip; ++ int id; ++ spinlock_t lock; ++ ++ /* Used to preserve GPIO/PWM registers across suspend / ++ * resume */ ++ u32 blink_select; ++ u32 blink_on_duration; ++ u32 blink_off_duration; ++}; ++ ++struct mvebu_gpio_chip { ++ struct gpio_chip chip; ++ spinlock_t lock; ++ void __iomem *membase; ++ void __iomem *percpu_membase; ++ int irqbase; ++ struct irq_domain *domain; ++ int soc_variant; ++ struct clk *clk; ++#ifdef CONFIG_PWM ++ struct mvebu_pwm pwm; ++#endif ++ /* Used to preserve GPIO registers across suspend/resume */ ++ u32 out_reg; ++ u32 io_conf_reg; ++ u32 blink_en_reg; ++ u32 in_pol_reg; ++ u32 edge_mask_regs[4]; ++ u32 level_mask_regs[4]; ++}; ++ ++void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value); ++ ++#ifdef CONFIG_PWM ++int mvebu_pwm_probe(struct platform_device *pdev, ++ struct mvebu_gpio_chip *mvchip, ++ int id); ++void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip); ++void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip); ++#else ++int mvebu_pwm_probe(struct platform_device *pdev, ++ struct mvebu_gpio_chip *mvchip, ++ int id) ++{ ++ return 0; ++} ++ ++void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) ++{ ++} ++ ++void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) ++{ ++} ++#endif ++#endif diff --git a/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch b/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch new file mode 100644 index 0000000000..48f93944bf --- /dev/null +++ b/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch @@ -0,0 +1,52 @@ +Document the optional parameters needed for PWM operation of gpio +lines. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 ++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt ++++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt +@@ -38,6 +38,23 @@ Required properties: + - #gpio-cells: Should be two. The first cell is the pin number. The + second cell is reserved for flags, unused at the moment. + ++Optional properties: ++ ++In order to use the gpio lines in PWM mode, some additional optional ++properties are required. Only Armada 370 and XP supports these ++properties. ++ ++- reg: an additional register set is needed, for the GPIO Blink ++ Counter on/off registers. ++ ++- reg-names: Must contain an entry "pwm" corresponding to the ++ additional register range needed for pwm operation. ++ ++- #pwm-cells: Should be two. The first cell is the pin number. The ++ second cell is reserved for flags, unused at the moment. ++ ++- clocks: Must be a phandle to the clock for the gpio controller. ++ + Example: + + gpio0: gpio@d0018100 { +@@ -51,3 +68,17 @@ Example: + #interrupt-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; ++ ++ gpio1: gpio@18140 { ++ compatible = "marvell,orion-gpio"; ++ reg = <0x18140 0x40>, <0x181c8 0x08>; ++ reg-names = "gpio", "pwm"; ++ ngpios = <17>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ #pwm-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ interrupts = <87>, <88>, <89>; ++ clocks = <&coreclk 0>; ++ }; diff --git a/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch b/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch new file mode 100644 index 0000000000..2f81504a50 --- /dev/null +++ b/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch @@ -0,0 +1,149 @@ +Add properties to the gpio nodes to allow them to be also used +as pwm lines. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++-- + arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++-- + arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++-- + arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++-- + 4 files changed, 30 insertions(+), 8 deletions(-) + +--- a/arch/arm/boot/dts/armada-370.dtsi ++++ b/arch/arm/boot/dts/armada-370.dtsi +@@ -123,24 +123,30 @@ + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; +- reg = <0x18100 0x40>; ++ reg = <0x18100 0x40>, <0x181c0 0x08>; ++ reg-names = "gpio", "pwm"; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; ++ #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; ++ clocks = <&coreclk 0>; + }; + + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; +- reg = <0x18140 0x40>; ++ reg = <0x18140 0x40>, <0x181c8 0x08>; ++ reg-names = "gpio", "pwm"; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; ++ #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; ++ clocks = <&coreclk 0>; + }; + + gpio2: gpio@18180 { +--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi +@@ -169,24 +169,30 @@ + internal-regs { + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; +- reg = <0x18100 0x40>; ++ reg = <0x18100 0x40>, <0x181c0 0x08>; ++ reg-names = "gpio", "pwm"; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; ++ #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; ++ clocks = <&coreclk 0>; + }; + + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; +- reg = <0x18140 0x40>; ++ reg = <0x18140 0x40>, <0x181c8 0x08>; ++ reg-names = "gpio", "pwm"; + ngpios = <17>; + gpio-controller; + #gpio-cells = <2>; ++ #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>; ++ clocks = <&coreclk 0>; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi +@@ -253,24 +253,28 @@ + internal-regs { + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; +- reg = <0x18100 0x40>; ++ reg = <0x18100 0x40>, <0x181c0 0x08>; ++ reg-names = "gpio", "pwm"; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; ++ #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; ++ clocks = <&coreclk 0>; + }; + + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; +- reg = <0x18140 0x40>; ++ reg = <0x18140 0x40>, <0x181c8 0x08>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; ++ clocks = <&coreclk 0>; + }; + + gpio2: gpio@18180 { +--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi +@@ -291,24 +291,30 @@ + internal-regs { + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; +- reg = <0x18100 0x40>; ++ reg = <0x18100 0x40>, <0x181c0 0x08>; ++ reg-names = "gpio", "pwm"; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; ++ #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; ++ clocks = <&coreclk 0>; + }; + + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; +- reg = <0x18140 0x40>; ++ reg = <0x18140 0x40>, <0x181c8 0x08>; ++ reg-names = "gpio", "pwm"; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; ++ #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; ++ clocks = <&coreclk 0>; + }; + + gpio2: gpio@18180 { diff --git a/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch b/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch new file mode 100644 index 0000000000..9c46e6885d --- /dev/null +++ b/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch @@ -0,0 +1,18 @@ +Now that the gpio driver also supports PWM operation, enable +the PWM framework in mvebu_v7_defconfig. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + arch/arm/configs/mvebu_v7_defconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/configs/mvebu_v7_defconfig ++++ b/arch/arm/configs/mvebu_v7_defconfig +@@ -116,6 +116,7 @@ CONFIG_DMADEVICES=y + CONFIG_MV_XOR=y + # CONFIG_IOMMU_SUPPORT is not set + CONFIG_MEMORY=y ++CONFIG_PWM=y + CONFIG_EXT4_FS=y + CONFIG_ISO9660_FS=y + CONFIG_JOLIET=y diff --git a/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch b/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch new file mode 100644 index 0000000000..8af5eba5b0 --- /dev/null +++ b/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch @@ -0,0 +1,28 @@ +The mvebu gpio driver can also perform PWM on some pins. Us the +pwm-fan driver to control the fan of the WRT1900AC, giving us fine +grain control over its speed and hence noise. + +Signed-off-by: Andrew Lunn <andrew@lunn.ch> +--- + arch/arm/boot/dts/armada-xp-wrt1900ac.dts | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +--- a/arch/arm/boot/dts/armada-xp-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-mamba.dts +@@ -302,13 +302,11 @@ + }; + }; + +- gpio_fan { ++ pwm_fan { + /* SUNON HA4010V4-0000-C99 */ +- compatible = "gpio-fan"; +- gpios = <&gpio0 24 0>; + +- gpio-fan,speed-map = <0 0 +- 4500 1>; ++ compatible = "pwm-fan"; ++ pwms = <&gpio0 24 4000 0>; + }; + + mvsw61xx { |