738 files changed, 0 insertions, 113992 deletions

diff --git a/target/linux/apm821xx/Makefile b/target/linux/apm821xx/Makefile
index a67aee3b8c..c3253322f2 100644
--- a/target/linux/apm821xx/Makefile
+++ b/target/linux/apm821xx/Makefile
@@ -14,7 +14,6 @@ MAINTAINER:=Chris Blake <chrisrblake93@gmail.com>, \
 SUBTARGETS:=nand sata
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 define Target/Description
 	Build images for AppliedMicro APM821xx based boards.
diff --git a/target/linux/apm821xx/patches-4.19/010-dmaengine-dw-dmac-implement-dma-prot.patch b/target/linux/apm821xx/patches-4.19/010-dmaengine-dw-dmac-implement-dma-prot.patch
deleted file mode 100644
index 86da6fcd89..0000000000
--- a/target/linux/apm821xx/patches-4.19/010-dmaengine-dw-dmac-implement-dma-prot.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 7b0c03ecc42fb223baf015877fee9d517c2c8af1 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 17 Nov 2018 17:17:21 +0100
-Subject: dmaengine: dw-dmac: implement dma protection control setting
-
-This patch adds a new device-tree property that allows to
-specify the dma protection control bits for the all of the
-DMA controller's channel uniformly.
-
-Setting the "correct" bits can have a huge impact on the
-PPC460EX and APM82181 that use this DMA engine in combination
-with a DesignWare' SATA-II core (sata_dwc_460ex driver).
-
-In the OpenWrt Forum, the user takimata reported that:
-|It seems your patch unleashed the full power of the SATA port.
-|Where I was previously hitting a really hard limit at around
-|82 MB/s for reading and 27 MB/s for writing, I am now getting this:
-|
-|root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024
-|1024+0 records in
-|1024+0 records out
-|real    0m 13.65s
-|user    0m 0.01s
-|sys     0m 11.89s
-|
-|root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024
-|1024+0 records in
-|1024+0 records out
-|real    0m 8.41s
-|user    0m 0.01s
-|sys     0m 4.70s
-|
-|This means: 121 MB/s reading and 75 MB/s writing!
-|
-|The drive is a WD Green WD10EARX taken from an older MBL Single.
-|I repeated the test a few times with even larger files to rule out
-|any caching, I'm still seeing the same great performance. OpenWrt is
-|now completely on par with the original MBL firmware's performance.
-
-Another user And.short reported:
-|I can report that your fix worked! Boots up fine with two
-|drives even with more partitions, and no more reboot on
-|concurrent disk access!
-
-A closer look into the sata_dwc_460ex code revealed that
-the driver did initally set the correct protection control
-bits. However, this feature was lost when the sata_dwc_460ex
-driver was converted to the generic DMA driver framework.
-
-BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55
-BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50
-Fixes: 8b3444852a2b ("sata_dwc_460ex: move to generic DMA driver")
-Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
-
---- a/drivers/dma/dw/core.c
-+++ b/drivers/dma/dw/core.c
-@@ -160,12 +160,14 @@ static void dwc_initialize_chan_idma32(s
- 
- static void dwc_initialize_chan_dw(struct dw_dma_chan *dwc)
- {
-+	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
- 	u32 cfghi = DWC_CFGH_FIFO_MODE;
- 	u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
- 	bool hs_polarity = dwc->dws.hs_polarity;
- 
- 	cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id);
- 	cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id);
-+	cfghi |= DWC_CFGH_PROTCTL(dw->pdata->protctl);
- 
- 	/* Set polarity of handshake interface */
- 	cfglo |= hs_polarity ? DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL : 0;
---- a/drivers/dma/dw/platform.c
-+++ b/drivers/dma/dw/platform.c
-@@ -162,6 +162,12 @@ dw_dma_parse_dt(struct platform_device *
- 			pdata->multi_block[tmp] = 1;
- 	}
- 
-+	if (!of_property_read_u32(np, "snps,dma-protection-control", &tmp)) {
-+		if (tmp > CHAN_PROTCTL_MASK)
-+			return NULL;
-+		pdata->protctl = tmp;
-+	}
-+
- 	return pdata;
- }
- #else
---- a/drivers/dma/dw/regs.h
-+++ b/drivers/dma/dw/regs.h
-@@ -200,6 +200,10 @@ enum dw_dma_msize {
- #define DWC_CFGH_FCMODE		(1 << 0)
- #define DWC_CFGH_FIFO_MODE	(1 << 1)
- #define DWC_CFGH_PROTCTL(x)	((x) << 2)
-+#define DWC_CFGH_PROTCTL_DATA	(0 << 2)	/* data access - always set */
-+#define DWC_CFGH_PROTCTL_PRIV	(1 << 2)	/* privileged -> AHB HPROT[1] */
-+#define DWC_CFGH_PROTCTL_BUFFER	(2 << 2)	/* bufferable -> AHB HPROT[2] */
-+#define DWC_CFGH_PROTCTL_CACHE	(4 << 2)	/* cacheable  -> AHB HPROT[3] */
- #define DWC_CFGH_DS_UPD_EN	(1 << 5)
- #define DWC_CFGH_SS_UPD_EN	(1 << 6)
- #define DWC_CFGH_SRC_PER(x)	((x) << 7)
---- a/include/linux/platform_data/dma-dw.h
-+++ b/include/linux/platform_data/dma-dw.h
-@@ -49,6 +49,7 @@ struct dw_dma_slave {
-  * @data_width: Maximum data width supported by hardware per AHB master
-  *		(in bytes, power of 2)
-  * @multi_block: Multi block transfers supported by hardware per channel.
-+ * @protctl: Protection control signals setting per channel.
-  */
- struct dw_dma_platform_data {
- 	unsigned int	nr_channels;
-@@ -65,6 +66,11 @@ struct dw_dma_platform_data {
- 	unsigned char	nr_masters;
- 	unsigned char	data_width[DW_DMA_MAX_NR_MASTERS];
- 	unsigned char	multi_block[DW_DMA_MAX_NR_CHANNELS];
-+#define CHAN_PROTCTL_PRIVILEGED		BIT(0)
-+#define CHAN_PROTCTL_BUFFERABLE		BIT(1)
-+#define CHAN_PROTCTL_CACHEABLE		BIT(2)
-+#define CHAN_PROTCTL_MASK		GENMASK(2, 0)
-+	unsigned char	protctl;
- };
- 
- #endif /* _PLATFORM_DATA_DMA_DW_H */
---- /dev/null
-+++ b/include/dt-bindings/dma/dw-dmac.h
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+
-+#ifndef __DT_BINDINGS_DMA_DW_DMAC_H__
-+#define __DT_BINDINGS_DMA_DW_DMAC_H__
-+
-+/*
-+ * Protection Control bits provide protection against illegal transactions.
-+ * The protection bits[0:2] are one-to-one mapped to AHB HPROT[3:1] signals.
-+ */
-+#define DW_DMAC_HPROT1_PRIVILEGED_MODE	(1 << 0)	/* Privileged Mode */
-+#define DW_DMAC_HPROT2_BUFFERABLE	(1 << 1)	/* DMA is bufferable */
-+#define DW_DMAC_HPROT3_CACHEABLE	(1 << 2)	/* DMA is cacheable */
-+
-+#endif /* __DT_BINDINGS_DMA_DW_DMAC_H__ */
diff --git a/target/linux/apm821xx/patches-4.19/023-0003-crypto-drop-mask-CRYPTO_ALG_ASYNC-from-cipher-tfm-al.patch b/target/linux/apm821xx/patches-4.19/023-0003-crypto-drop-mask-CRYPTO_ALG_ASYNC-from-cipher-tfm-al.patch
deleted file mode 100644
index bb1f406476..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0003-crypto-drop-mask-CRYPTO_ALG_ASYNC-from-cipher-tfm-al.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 1ad0f1603a6b2afb62a1c065409aaa4e43ca7627 Mon Sep 17 00:00:00 2001
-From: Eric Biggers <ebiggers@google.com>
-Date: Wed, 14 Nov 2018 12:19:39 -0800
-Subject: [PATCH 03/15] crypto: drop mask=CRYPTO_ALG_ASYNC from 'cipher' tfm
- allocations
-
-'cipher' algorithms (single block ciphers) are always synchronous, so
-passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no
-effect.  Many users therefore already don't pass it, but some still do.
-This inconsistency can cause confusion, especially since the way the
-'mask' argument works is somewhat counterintuitive.
-
-Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
-
-This patch shouldn't change any actual behavior.
-
-Signed-off-by: Eric Biggers <ebiggers@google.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_alg.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_alg.c
-+++ b/drivers/crypto/amcc/crypto4xx_alg.c
-@@ -526,8 +526,7 @@ static int crypto4xx_compute_gcm_hash_ke
- 	uint8_t src[16] = { 0 };
- 	int rc = 0;
- 
--	aes_tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC |
--				      CRYPTO_ALG_NEED_FALLBACK);
-+	aes_tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_NEED_FALLBACK);
- 	if (IS_ERR(aes_tfm)) {
- 		rc = PTR_ERR(aes_tfm);
- 		pr_warn("could not load aes cipher driver: %d\n", rc);
diff --git a/target/linux/apm821xx/patches-4.19/023-0004-crypto4xx_core-don-t-abuse-__dma_sync_page.patch b/target/linux/apm821xx/patches-4.19/023-0004-crypto4xx_core-don-t-abuse-__dma_sync_page.patch
deleted file mode 100644
index 635ab0037e..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0004-crypto4xx_core-don-t-abuse-__dma_sync_page.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 67d8208fba1324fa0198f9fc58a9edbe09596947 Mon Sep 17 00:00:00 2001
-From: Christoph Hellwig <hch@lst.de>
-Date: Sun, 16 Dec 2018 18:19:46 +0100
-Subject: [PATCH 04/15] crypto4xx_core: don't abuse __dma_sync_page
-
-This function is internal to the DMA API implementation. Instead use
-the DMA API to properly unmap. Note that the DMA API usage in this
-driver is a disaster and urgently needs some work - it is missing all
-the unmaps, seems to do a secondary map where it looks like it should
-to a unmap in one place to work around cache coherency and the
-directions passed in seem to be partially wrong.
-
-Signed-off-by: Christoph Hellwig <hch@lst.de>
-Tested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -596,7 +596,7 @@ static void crypto4xx_aead_done(struct c
- 					  pd->pd_ctl_len.bf.pkt_len,
- 					  dst);
- 	} else {
--		__dma_sync_page(sg_page(dst), dst->offset, dst->length,
-+		dma_unmap_page(dev->core_dev->device, pd->dest, dst->length,
- 				DMA_FROM_DEVICE);
- 	}
- 
diff --git a/target/linux/apm821xx/patches-4.19/023-0005-cross-tree-phase-out-dma_zalloc_coherent.patch b/target/linux/apm821xx/patches-4.19/023-0005-cross-tree-phase-out-dma_zalloc_coherent.patch
deleted file mode 100644
index 857578bb93..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0005-cross-tree-phase-out-dma_zalloc_coherent.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 750afb08ca71310fcf0c4e2cb1565c63b8235b60 Mon Sep 17 00:00:00 2001
-From: Luis Chamberlain <mcgrof@kernel.org>
-Date: Fri, 4 Jan 2019 09:23:09 +0100
-Subject: [PATCH 05/15] cross-tree: phase out dma_zalloc_coherent()
-
-We already need to zero out memory for dma_alloc_coherent(), as such
-using dma_zalloc_coherent() is superflous. Phase it out.
-
-This change was generated with the following Coccinelle SmPL patch:
-
-@ replace_dma_zalloc_coherent @
-expression dev, size, data, handle, flags;
-@@
-
--dma_zalloc_coherent(dev, size, handle, flags)
-+dma_alloc_coherent(dev, size, handle, flags)
-
-Suggested-by: Christoph Hellwig <hch@lst.de>
-Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-[hch: re-ran the script on the latest tree]
-Signed-off-by: Christoph Hellwig <hch@lst.de>
----
- drivers/crypto/amcc/crypto4xx_core.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -283,9 +283,9 @@ static u32 crypto4xx_put_pd_to_pdr(struc
-  */
- static u32 crypto4xx_build_gdr(struct crypto4xx_device *dev)
- {
--	dev->gdr = dma_zalloc_coherent(dev->core_dev->device,
--				       sizeof(struct ce_gd) * PPC4XX_NUM_GD,
--				       &dev->gdr_pa, GFP_ATOMIC);
-+	dev->gdr = dma_alloc_coherent(dev->core_dev->device,
-+				      sizeof(struct ce_gd) * PPC4XX_NUM_GD,
-+				      &dev->gdr_pa, GFP_ATOMIC);
- 	if (!dev->gdr)
- 		return -ENOMEM;
- 
diff --git a/target/linux/apm821xx/patches-4.19/023-0006-crypto-crypto4xx-add-prng-crypto-support.patch b/target/linux/apm821xx/patches-4.19/023-0006-crypto-crypto4xx-add-prng-crypto-support.patch
deleted file mode 100644
index ba4419787c..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0006-crypto-crypto4xx-add-prng-crypto-support.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From d072bfa4885354fff86aa1fb1dbc4f1533c9e0bf Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 23 Dec 2018 02:16:13 +0100
-Subject: [PATCH 06/15] crypto: crypto4xx - add prng crypto support
-
-This patch adds support for crypto4xx's ANSI X9.17 Annex C compliant
-pseudo random number generator which provides a pseudo random source
-for the purpose of generating  Initialization Vectors (IV's) for AES
-algorithms to the Packet Engine and other pseudo random number
-requirements.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c    | 87 +++++++++++++++++++++++++
- drivers/crypto/amcc/crypto4xx_core.h    |  4 ++
- drivers/crypto/amcc/crypto4xx_reg_def.h |  1 +
- 3 files changed, 92 insertions(+)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -40,9 +40,11 @@
- #include <crypto/ctr.h>
- #include <crypto/gcm.h>
- #include <crypto/sha.h>
-+#include <crypto/rng.h>
- #include <crypto/scatterwalk.h>
- #include <crypto/skcipher.h>
- #include <crypto/internal/aead.h>
-+#include <crypto/internal/rng.h>
- #include <crypto/internal/skcipher.h>
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_core.h"
-@@ -1046,6 +1048,10 @@ static int crypto4xx_register_alg(struct
- 			rc = crypto_register_ahash(&alg->alg.u.hash);
- 			break;
- 
-+		case CRYPTO_ALG_TYPE_RNG:
-+			rc = crypto_register_rng(&alg->alg.u.rng);
-+			break;
-+
- 		default:
- 			rc = crypto_register_skcipher(&alg->alg.u.cipher);
- 			break;
-@@ -1075,6 +1081,10 @@ static void crypto4xx_unregister_alg(str
- 			crypto_unregister_aead(&alg->alg.u.aead);
- 			break;
- 
-+		case CRYPTO_ALG_TYPE_RNG:
-+			crypto_unregister_rng(&alg->alg.u.rng);
-+			break;
-+
- 		default:
- 			crypto_unregister_skcipher(&alg->alg.u.cipher);
- 		}
-@@ -1133,6 +1143,69 @@ static irqreturn_t crypto4xx_ce_interrup
- 		PPC4XX_TMO_ERR_INT);
- }
- 
-+static int ppc4xx_prng_data_read(struct crypto4xx_device *dev,
-+				 u8 *data, unsigned int max)
-+{
-+	unsigned int i, curr = 0;
-+	u32 val[2];
-+
-+	do {
-+		/* trigger PRN generation */
-+		writel(PPC4XX_PRNG_CTRL_AUTO_EN,
-+		       dev->ce_base + CRYPTO4XX_PRNG_CTRL);
-+
-+		for (i = 0; i < 1024; i++) {
-+			/* usually 19 iterations are enough */
-+			if ((readl(dev->ce_base + CRYPTO4XX_PRNG_STAT) &
-+			     CRYPTO4XX_PRNG_STAT_BUSY))
-+				continue;
-+
-+			val[0] = readl_be(dev->ce_base + CRYPTO4XX_PRNG_RES_0);
-+			val[1] = readl_be(dev->ce_base + CRYPTO4XX_PRNG_RES_1);
-+			break;
-+		}
-+		if (i == 1024)
-+			return -ETIMEDOUT;
-+
-+		if ((max - curr) >= 8) {
-+			memcpy(data, &val, 8);
-+			data += 8;
-+			curr += 8;
-+		} else {
-+			/* copy only remaining bytes */
-+			memcpy(data, &val, max - curr);
-+			break;
-+		}
-+	} while (curr < max);
-+
-+	return curr;
-+}
-+
-+static int crypto4xx_prng_generate(struct crypto_rng *tfm,
-+				   const u8 *src, unsigned int slen,
-+				   u8 *dstn, unsigned int dlen)
-+{
-+	struct rng_alg *alg = crypto_rng_alg(tfm);
-+	struct crypto4xx_alg *amcc_alg;
-+	struct crypto4xx_device *dev;
-+	int ret;
-+
-+	amcc_alg = container_of(alg, struct crypto4xx_alg, alg.u.rng);
-+	dev = amcc_alg->dev;
-+
-+	mutex_lock(&dev->core_dev->rng_lock);
-+	ret = ppc4xx_prng_data_read(dev, dstn, dlen);
-+	mutex_unlock(&dev->core_dev->rng_lock);
-+	return ret;
-+}
-+
-+
-+static int crypto4xx_prng_seed(struct crypto_rng *tfm, const u8 *seed,
-+			unsigned int slen)
-+{
-+	return 0;
-+}
-+
- /**
-  * Supported Crypto Algorithms
-  */
-@@ -1302,6 +1375,18 @@ static struct crypto4xx_alg_common crypt
- 			.cra_module	= THIS_MODULE,
- 		},
- 	} },
-+	{ .type = CRYPTO_ALG_TYPE_RNG, .u.rng = {
-+		.base = {
-+			.cra_name		= "stdrng",
-+			.cra_driver_name        = "crypto4xx_rng",
-+			.cra_priority		= 300,
-+			.cra_ctxsize		= 0,
-+			.cra_module		= THIS_MODULE,
-+		},
-+		.generate               = crypto4xx_prng_generate,
-+		.seed                   = crypto4xx_prng_seed,
-+		.seedsize               = 0,
-+	} },
- };
- 
- /**
-@@ -1371,6 +1456,7 @@ static int crypto4xx_probe(struct platfo
- 	core_dev->dev->core_dev = core_dev;
- 	core_dev->dev->is_revb = is_revb;
- 	core_dev->device = dev;
-+	mutex_init(&core_dev->rng_lock);
- 	spin_lock_init(&core_dev->lock);
- 	INIT_LIST_HEAD(&core_dev->dev->alg_list);
- 	ratelimit_default_init(&core_dev->dev->aead_ratelimit);
-@@ -1450,6 +1536,7 @@ static int crypto4xx_remove(struct platf
- 	tasklet_kill(&core_dev->tasklet);
- 	/* Un-register with Linux CryptoAPI */
- 	crypto4xx_unregister_alg(core_dev->dev);
-+	mutex_destroy(&core_dev->rng_lock);
- 	/* Free all allocated memory */
- 	crypto4xx_stop_all(core_dev);
- 
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -23,8 +23,10 @@
- #define __CRYPTO4XX_CORE_H__
- 
- #include <linux/ratelimit.h>
-+#include <linux/mutex.h>
- #include <crypto/internal/hash.h>
- #include <crypto/internal/aead.h>
-+#include <crypto/internal/rng.h>
- #include <crypto/internal/skcipher.h>
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_sa.h"
-@@ -119,6 +121,7 @@ struct crypto4xx_core_device {
- 	u32 irq;
- 	struct tasklet_struct tasklet;
- 	spinlock_t lock;
-+	struct mutex rng_lock;
- };
- 
- struct crypto4xx_ctx {
-@@ -143,6 +146,7 @@ struct crypto4xx_alg_common {
- 		struct skcipher_alg cipher;
- 		struct ahash_alg hash;
- 		struct aead_alg aead;
-+		struct rng_alg rng;
- 	} u;
- };
- 
---- a/drivers/crypto/amcc/crypto4xx_reg_def.h
-+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
-@@ -100,6 +100,7 @@
- #define CRYPTO4XX_ENDIAN_CFG			0x000600d8
- 
- #define CRYPTO4XX_PRNG_STAT			0x00070000
-+#define CRYPTO4XX_PRNG_STAT_BUSY		0x1
- #define CRYPTO4XX_PRNG_CTRL			0x00070004
- #define CRYPTO4XX_PRNG_SEED_L			0x00070008
- #define CRYPTO4XX_PRNG_SEED_H			0x0007000c
diff --git a/target/linux/apm821xx/patches-4.19/023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch b/target/linux/apm821xx/patches-4.19/023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
deleted file mode 100644
index d2c3848820..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6e88098ca43a3d80ae86908f7badba683c8a0d84 Mon Sep 17 00:00:00 2001
-From: Corentin Labbe <clabbe@baylibre.com>
-Date: Wed, 23 Jan 2019 11:24:18 +0000
-Subject: [PATCH 07/15] crypto: crypto4xx - Fix wrong
- ppc4xx_trng_probe()/ppc4xx_trng_remove() arguments
-
-When building without CONFIG_HW_RANDOM_PPC4XX, I hit the following build failure:
-drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_probe':
-drivers/crypto/amcc/crypto4xx_core.c:1407:20: error: passing argument 1 of 'ppc4xx_trng_probe' from incompatible pointer type [-Werror=incompatible-pointer-types]
-In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0:
-drivers/crypto/amcc/crypto4xx_trng.h:28:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *'
-drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_remove':
-drivers/crypto/amcc/crypto4xx_core.c:1434:21: error: passing argument 1 of 'ppc4xx_trng_remove' from incompatible pointer type [-Werror=incompatible-pointer-types]
-In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0:
-drivers/crypto/amcc/crypto4xx_trng.h:30:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *'
-
-This patch fix the needed argument of ppc4xx_trng_probe()/ppc4xx_trng_remove() in that case.
-
-Fixes: 5343e674f32f ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
-Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_trng.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_trng.h
-+++ b/drivers/crypto/amcc/crypto4xx_trng.h
-@@ -26,9 +26,9 @@ void ppc4xx_trng_probe(struct crypto4xx_
- void ppc4xx_trng_remove(struct crypto4xx_core_device *core_dev);
- #else
- static inline void ppc4xx_trng_probe(
--	struct crypto4xx_device *dev __maybe_unused) { }
-+	struct crypto4xx_core_device *dev __maybe_unused) { }
- static inline void ppc4xx_trng_remove(
--	struct crypto4xx_device *dev __maybe_unused) { }
-+	struct crypto4xx_core_device *dev __maybe_unused) { }
- #endif
- 
- #endif
diff --git a/target/linux/apm821xx/patches-4.19/023-0012-crypto-crypto4xx-get-rid-of-redundant-using_sd-varia.patch b/target/linux/apm821xx/patches-4.19/023-0012-crypto-crypto4xx-get-rid-of-redundant-using_sd-varia.patch
deleted file mode 100644
index 4b246a793d..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0012-crypto-crypto4xx-get-rid-of-redundant-using_sd-varia.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 38cf5533d7a876f75088bacc1277046f30005f28 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Mon, 22 Apr 2019 13:26:01 +0200
-Subject: [PATCH 12/15] crypto: crypto4xx - get rid of redundant using_sd
- variable
-
-using_sd is used as a stand-in for sa_command_0.bf.scatter
-that we need to set anyway, so we might as well just prevent
-double-accounting.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 6 ++----
- drivers/crypto/amcc/crypto4xx_core.h | 1 -
- 2 files changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -539,7 +539,7 @@ static void crypto4xx_cipher_done(struct
- 
- 	req = skcipher_request_cast(pd_uinfo->async_req);
- 
--	if (pd_uinfo->using_sd) {
-+	if (pd_uinfo->sa_va->sa_command_0.bf.scatter) {
- 		crypto4xx_copy_pkt_to_dst(dev, pd, pd_uinfo,
- 					  req->cryptlen, req->dst);
- 	} else {
-@@ -593,7 +593,7 @@ static void crypto4xx_aead_done(struct c
- 	u32 icv[AES_BLOCK_SIZE];
- 	int err = 0;
- 
--	if (pd_uinfo->using_sd) {
-+	if (pd_uinfo->sa_va->sa_command_0.bf.scatter) {
- 		crypto4xx_copy_pkt_to_dst(dev, pd, pd_uinfo,
- 					  pd->pd_ctl_len.bf.pkt_len,
- 					  dst);
-@@ -887,7 +887,6 @@ int crypto4xx_build_pd(struct crypto_asy
- 		 * we know application give us dst a whole piece of memory
- 		 * no need to use scatter ring.
- 		 */
--		pd_uinfo->using_sd = 0;
- 		pd_uinfo->first_sd = 0xffffffff;
- 		sa->sa_command_0.bf.scatter = 0;
- 		pd->dest = (u32)dma_map_page(dev->core_dev->device,
-@@ -901,7 +900,6 @@ int crypto4xx_build_pd(struct crypto_asy
- 		u32 sd_idx = fst_sd;
- 		nbytes = datalen;
- 		sa->sa_command_0.bf.scatter = 1;
--		pd_uinfo->using_sd = 1;
- 		pd_uinfo->first_sd = fst_sd;
- 		sd = crypto4xx_get_sdp(dev, &sd_dma, sd_idx);
- 		pd->dest = sd_dma;
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -64,7 +64,6 @@ union shadow_sa_buf {
- struct pd_uinfo {
- 	struct crypto4xx_device *dev;
- 	u32   state;
--	u32 using_sd;
- 	u32 first_gd;		/* first gather discriptor
- 				used by this packet */
- 	u32 num_gd;             /* number of gather discriptor
diff --git a/target/linux/apm821xx/patches-4.19/023-0013-crypto-crypto4xx-fix-AES-CTR-blocksize-value.patch b/target/linux/apm821xx/patches-4.19/023-0013-crypto-crypto4xx-fix-AES-CTR-blocksize-value.patch
deleted file mode 100644
index a6fa84d962..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0013-crypto-crypto4xx-fix-AES-CTR-blocksize-value.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From bfa2ba7d9e6b20aca82b99e6842fe18842ae3a0f Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Fri, 17 May 2019 23:15:57 +0200
-Subject: [PATCH 13/15] crypto: crypto4xx - fix AES CTR blocksize value
-
-This patch fixes a issue with crypto4xx's ctr(aes) that was
-discovered by libcapi's kcapi-enc-test.sh test.
-
-The some of the ctr(aes) encryptions test were failing on the
-non-power-of-two test:
-
-kcapi-enc - Error: encryption failed with error 0
-kcapi-enc - Error: decryption failed with error 0
-[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits):
-original file (1d100e..cc96184c) and generated file (e3b0c442..1b7852b855)
-[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits)
-(openssl generated CT): original file (e3b0..5) and generated file (3..8e)
-[PASSED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits)
-(openssl generated PT)
-[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (password):
-original file (1d1..84c) and generated file (e3b..852b855)
-
-But the 16, 32, 512, 65536 tests always worked.
-
-Thankfully, this isn't a hidden hardware problem like previously,
-instead this turned out to be a copy and paste issue.
-
-With this patch, all the tests are passing with and
-kcapi-enc-test.sh gives crypto4xx's a clean bill of health:
- "Number of failures: 0" :).
-
-Cc: stable@vger.kernel.org
-Fixes: 98e87e3d933b ("crypto: crypto4xx - add aes-ctr support")
-Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -1257,7 +1257,7 @@ static struct crypto4xx_alg_common crypt
- 			.cra_flags = CRYPTO_ALG_NEED_FALLBACK |
- 				CRYPTO_ALG_ASYNC |
- 				CRYPTO_ALG_KERN_DRIVER_ONLY,
--			.cra_blocksize = AES_BLOCK_SIZE,
-+			.cra_blocksize = 1,
- 			.cra_ctxsize = sizeof(struct crypto4xx_ctx),
- 			.cra_module = THIS_MODULE,
- 		},
-@@ -1277,7 +1277,7 @@ static struct crypto4xx_alg_common crypt
- 			.cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
- 			.cra_flags = CRYPTO_ALG_ASYNC |
- 				CRYPTO_ALG_KERN_DRIVER_ONLY,
--			.cra_blocksize = AES_BLOCK_SIZE,
-+			.cra_blocksize = 1,
- 			.cra_ctxsize = sizeof(struct crypto4xx_ctx),
- 			.cra_module = THIS_MODULE,
- 		},
diff --git a/target/linux/apm821xx/patches-4.19/023-0014-crypto-crypto4xx-fix-blocksize-for-cfb-and-ofb.patch b/target/linux/apm821xx/patches-4.19/023-0014-crypto-crypto4xx-fix-blocksize-for-cfb-and-ofb.patch
deleted file mode 100644
index 16f5af2c46..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0014-crypto-crypto4xx-fix-blocksize-for-cfb-and-ofb.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 70c4997f34b6c6888b3ac157adec49e01d0df2d5 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 18 May 2019 23:28:11 +0200
-Subject: [PATCH 14/15] crypto: crypto4xx - fix blocksize for cfb and ofb
-
-While the hardware consider them to be blockciphers, the
-reference implementation defines them as streamciphers.
-
-Do the right thing and set the blocksize to 1. This
-was found by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS.
-
-This fixes the following issues:
-skcipher: blocksize for ofb-aes-ppc4xx (16) doesn't match generic impl (1)
-skcipher: blocksize for cfb-aes-ppc4xx (16) doesn't match generic impl (1)
-
-Cc: Eric Biggers <ebiggers@kernel.org>
-Cc: stable@vger.kernel.org
-Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -1236,7 +1236,7 @@ static struct crypto4xx_alg_common crypt
- 			.cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
- 			.cra_flags = CRYPTO_ALG_ASYNC |
- 				CRYPTO_ALG_KERN_DRIVER_ONLY,
--			.cra_blocksize = AES_BLOCK_SIZE,
-+			.cra_blocksize = 1,
- 			.cra_ctxsize = sizeof(struct crypto4xx_ctx),
- 			.cra_module = THIS_MODULE,
- 		},
-@@ -1316,7 +1316,7 @@ static struct crypto4xx_alg_common crypt
- 			.cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
- 			.cra_flags = CRYPTO_ALG_ASYNC |
- 				CRYPTO_ALG_KERN_DRIVER_ONLY,
--			.cra_blocksize = AES_BLOCK_SIZE,
-+			.cra_blocksize = 1,
- 			.cra_ctxsize = sizeof(struct crypto4xx_ctx),
- 			.cra_module = THIS_MODULE,
- 		},
diff --git a/target/linux/apm821xx/patches-4.19/023-0015-crypto-crypto4xx-block-ciphers-should-only-accept-co.patch b/target/linux/apm821xx/patches-4.19/023-0015-crypto-crypto4xx-block-ciphers-should-only-accept-co.patch
deleted file mode 100644
index 2706042f67..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0015-crypto-crypto4xx-block-ciphers-should-only-accept-co.patch
+++ /dev/null
@@ -1,172 +0,0 @@
-From 0f7a81374060828280fcfdfbaa162cb559017f9f Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 18 May 2019 23:28:12 +0200
-Subject: [PATCH 15/15] crypto: crypto4xx - block ciphers should only accept
- complete blocks
-
-The hardware automatically zero pads incomplete block ciphers
-blocks without raising any errors. This is a screw-up. This
-was noticed by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS tests that
-sent a incomplete blocks and expect them to fail.
-
-This fixes:
-cbc-aes-ppc4xx encryption unexpectedly succeeded on test vector
-"random: len=2409 klen=32"; expected_error=-22, cfg="random:
-may_sleep use_digest src_divs=[96.90%@+2295, 2.34%@+4066,
-0.32%@alignmask+12, 0.34%@+4087, 0.9%@alignmask+1787, 0.1%@+3767]
-iv_offset=6"
-
-ecb-aes-ppc4xx encryption unexpectedly succeeded on test vector
-"random: len=1011 klen=32"; expected_error=-22, cfg="random:
-may_sleep use_digest src_divs=[100.0%@alignmask+20]
-dst_divs=[3.12%@+3001, 96.88%@+4070]"
-
-Cc: Eric Biggers <ebiggers@kernel.org>
-Cc: stable@vger.kernel.org [4.19, 5.0 and 5.1]
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_alg.c  | 36 +++++++++++++++++++---------
- drivers/crypto/amcc/crypto4xx_core.c | 16 ++++++-------
- drivers/crypto/amcc/crypto4xx_core.h | 10 ++++----
- 3 files changed, 39 insertions(+), 23 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_alg.c
-+++ b/drivers/crypto/amcc/crypto4xx_alg.c
-@@ -76,12 +76,16 @@ static void set_dynamic_sa_command_1(str
- }
- 
- static inline int crypto4xx_crypt(struct skcipher_request *req,
--				  const unsigned int ivlen, bool decrypt)
-+				  const unsigned int ivlen, bool decrypt,
-+				  bool check_blocksize)
- {
- 	struct crypto_skcipher *cipher = crypto_skcipher_reqtfm(req);
- 	struct crypto4xx_ctx *ctx = crypto_skcipher_ctx(cipher);
- 	__le32 iv[AES_IV_SIZE];
- 
-+	if (check_blocksize && !IS_ALIGNED(req->cryptlen, AES_BLOCK_SIZE))
-+		return -EINVAL;
-+
- 	if (ivlen)
- 		crypto4xx_memcpy_to_le32(iv, req->iv, ivlen);
- 
-@@ -90,24 +94,34 @@ static inline int crypto4xx_crypt(struct
- 		ctx->sa_len, 0, NULL);
- }
- 
--int crypto4xx_encrypt_noiv(struct skcipher_request *req)
-+int crypto4xx_encrypt_noiv_block(struct skcipher_request *req)
-+{
-+	return crypto4xx_crypt(req, 0, false, true);
-+}
-+
-+int crypto4xx_encrypt_iv_stream(struct skcipher_request *req)
-+{
-+	return crypto4xx_crypt(req, AES_IV_SIZE, false, false);
-+}
-+
-+int crypto4xx_decrypt_noiv_block(struct skcipher_request *req)
- {
--	return crypto4xx_crypt(req, 0, false);
-+	return crypto4xx_crypt(req, 0, true, true);
- }
- 
--int crypto4xx_encrypt_iv(struct skcipher_request *req)
-+int crypto4xx_decrypt_iv_stream(struct skcipher_request *req)
- {
--	return crypto4xx_crypt(req, AES_IV_SIZE, false);
-+	return crypto4xx_crypt(req, AES_IV_SIZE, true, false);
- }
- 
--int crypto4xx_decrypt_noiv(struct skcipher_request *req)
-+int crypto4xx_encrypt_iv_block(struct skcipher_request *req)
- {
--	return crypto4xx_crypt(req, 0, true);
-+	return crypto4xx_crypt(req, AES_IV_SIZE, false, true);
- }
- 
--int crypto4xx_decrypt_iv(struct skcipher_request *req)
-+int crypto4xx_decrypt_iv_block(struct skcipher_request *req)
- {
--	return crypto4xx_crypt(req, AES_IV_SIZE, true);
-+	return crypto4xx_crypt(req, AES_IV_SIZE, true, true);
- }
- 
- /**
-@@ -278,8 +292,8 @@ crypto4xx_ctr_crypt(struct skcipher_requ
- 		return ret;
- 	}
- 
--	return encrypt ? crypto4xx_encrypt_iv(req)
--		       : crypto4xx_decrypt_iv(req);
-+	return encrypt ? crypto4xx_encrypt_iv_stream(req)
-+		       : crypto4xx_decrypt_iv_stream(req);
- }
- 
- static int crypto4xx_sk_setup_fallback(struct crypto4xx_ctx *ctx,
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -1224,8 +1224,8 @@ static struct crypto4xx_alg_common crypt
- 		.max_keysize = AES_MAX_KEY_SIZE,
- 		.ivsize	= AES_IV_SIZE,
- 		.setkey = crypto4xx_setkey_aes_cbc,
--		.encrypt = crypto4xx_encrypt_iv,
--		.decrypt = crypto4xx_decrypt_iv,
-+		.encrypt = crypto4xx_encrypt_iv_block,
-+		.decrypt = crypto4xx_decrypt_iv_block,
- 		.init = crypto4xx_sk_init,
- 		.exit = crypto4xx_sk_exit,
- 	} },
-@@ -1244,8 +1244,8 @@ static struct crypto4xx_alg_common crypt
- 		.max_keysize = AES_MAX_KEY_SIZE,
- 		.ivsize	= AES_IV_SIZE,
- 		.setkey	= crypto4xx_setkey_aes_cfb,
--		.encrypt = crypto4xx_encrypt_iv,
--		.decrypt = crypto4xx_decrypt_iv,
-+		.encrypt = crypto4xx_encrypt_iv_stream,
-+		.decrypt = crypto4xx_decrypt_iv_stream,
- 		.init = crypto4xx_sk_init,
- 		.exit = crypto4xx_sk_exit,
- 	} },
-@@ -1304,8 +1304,8 @@ static struct crypto4xx_alg_common crypt
- 		.min_keysize = AES_MIN_KEY_SIZE,
- 		.max_keysize = AES_MAX_KEY_SIZE,
- 		.setkey	= crypto4xx_setkey_aes_ecb,
--		.encrypt = crypto4xx_encrypt_noiv,
--		.decrypt = crypto4xx_decrypt_noiv,
-+		.encrypt = crypto4xx_encrypt_noiv_block,
-+		.decrypt = crypto4xx_decrypt_noiv_block,
- 		.init = crypto4xx_sk_init,
- 		.exit = crypto4xx_sk_exit,
- 	} },
-@@ -1324,8 +1324,8 @@ static struct crypto4xx_alg_common crypt
- 		.max_keysize = AES_MAX_KEY_SIZE,
- 		.ivsize	= AES_IV_SIZE,
- 		.setkey	= crypto4xx_setkey_aes_ofb,
--		.encrypt = crypto4xx_encrypt_iv,
--		.decrypt = crypto4xx_decrypt_iv,
-+		.encrypt = crypto4xx_encrypt_iv_stream,
-+		.decrypt = crypto4xx_decrypt_iv_stream,
- 		.init = crypto4xx_sk_init,
- 		.exit = crypto4xx_sk_exit,
- 	} },
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -182,10 +182,12 @@ int crypto4xx_setkey_rfc3686(struct cryp
- 			     const u8 *key, unsigned int keylen);
- int crypto4xx_encrypt_ctr(struct skcipher_request *req);
- int crypto4xx_decrypt_ctr(struct skcipher_request *req);
--int crypto4xx_encrypt_iv(struct skcipher_request *req);
--int crypto4xx_decrypt_iv(struct skcipher_request *req);
--int crypto4xx_encrypt_noiv(struct skcipher_request *req);
--int crypto4xx_decrypt_noiv(struct skcipher_request *req);
-+int crypto4xx_encrypt_iv_stream(struct skcipher_request *req);
-+int crypto4xx_decrypt_iv_stream(struct skcipher_request *req);
-+int crypto4xx_encrypt_iv_block(struct skcipher_request *req);
-+int crypto4xx_decrypt_iv_block(struct skcipher_request *req);
-+int crypto4xx_encrypt_noiv_block(struct skcipher_request *req);
-+int crypto4xx_decrypt_noiv_block(struct skcipher_request *req);
- int crypto4xx_rfc3686_encrypt(struct skcipher_request *req);
- int crypto4xx_rfc3686_decrypt(struct skcipher_request *req);
- int crypto4xx_sha1_alg_init(struct crypto_tfm *tfm);
diff --git a/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch b/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index 8e3060d768..0000000000
--- a/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c     |   68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib.c        |   11 +++++--
- include/asm-generic/gpio.h    |    5 +++
- include/linux/gpio/consumer.h |    8 +++++
- 4 files changed, 90 insertions(+), 2 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
- 
- #include "gpiolib.h"
- 
-@@ -660,3 +662,72 @@ void of_gpiochip_remove(struct gpio_chip
- 	gpiochip_remove_pin_ranges(chip);
- 	of_node_put(chip->of_node);
- }
-+
-+#ifdef CONFIG_GPIO_SYSFS
-+
-+static struct of_device_id gpio_export_ids[] = {
-+	{ .compatible = "gpio-export" },
-+	{ /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *cnp;
-+	u32 val;
-+	int nb = 0;
-+
-+	for_each_child_of_node(np, cnp) {
-+		const char *name = NULL;
-+		int gpio;
-+		bool dmc;
-+		int max_gpio = 1;
-+		int i;
-+
-+		of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+		if (!name)
-+			max_gpio = of_gpio_count(cnp);
-+
-+		for (i = 0; i < max_gpio; i++) {
-+			unsigned flags = 0;
-+			enum of_gpio_flags of_flags;
-+
-+			gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+			if (!gpio_is_valid(gpio))
-+				return gpio;
-+
-+			if (of_flags == OF_GPIO_ACTIVE_LOW)
-+				flags |= GPIOF_ACTIVE_LOW;
-+
-+			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+			else
-+				flags |= GPIOF_IN;
-+
-+			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+				continue;
-+
-+			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+			gpio_export_with_name(gpio, dmc, name);
-+			nb++;
-+		}
-+	}
-+
-+	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+	.driver		= {
-+		.name		= "gpio-export",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(gpio_export_ids),
-+	},
-+	.probe		= of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
-+
-+#endif
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
- 
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- 				   unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -533,6 +533,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
- 
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
- 
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- 		      struct gpio_desc *desc);
-@@ -540,6 +541,13 @@ void gpiod_unexport(struct gpio_desc *de
- 
- #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
- 
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+			       bool direction_may_change,
-+			       const char *name)
-+{
-+	return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- 			       bool direction_may_change)
- {
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -568,7 +568,7 @@ static struct class gpio_class = {
-  *
-  * Returns zero on success, else an error.
-  */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- 	struct gpio_chip	*chip;
- 	struct gpio_device	*gdev;
-@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc,
- 	offset = gpio_chip_hwgpio(desc);
- 	if (chip->names && chip->names[offset])
- 		ioname = chip->names[offset];
-+	if (name)
-+		ioname = name;
- 
- 	dev = device_create_with_groups(&gpio_class, &gdev->dev,
- 					MKDEV(0, 0), data, gpio_groups,
-@@ -651,6 +653,12 @@ err_unlock:
- 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- 	return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+	return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
- 
- static int match_export(struct device *dev, const void *desc)
diff --git a/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch
deleted file mode 100644
index 18f4c72de8..0000000000
--- a/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -131,6 +131,17 @@ config CANYONLANDS
- 	help
- 	  This option enables support for the AMCC PPC460EX evaluation board.
- 
-+config APOLLO3G
-+	bool "Apollo3G"
-+	depends on 44x
-+	default n
-+	select PPC44x_SIMPLE
-+	select APM821xx
-+	select IBM_EMAC_RGMII
-+	select 460EX
-+	help
-+	  This option enables support for the AMCC Apollo 3G board.
-+
- config GLACIER
- 	bool "Glacier"
- 	depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p
-  * board.c file for it rather than adding it to this list.
-  */
- static char *board[] __initdata = {
-+	"amcc,apollo3g",
- 	"amcc,arches",
- 	"amcc,bamboo",
- 	"apm,bluestone",
diff --git a/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch b/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch
deleted file mode 100644
index 536a74ef00..0000000000
--- a/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Makefile
-+++ b/arch/powerpc/platforms/44x/Makefile
-@@ -4,6 +4,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
- obj-y	+= idle.o
- endif
- obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
-+obj-$(CONFIG_WNDR4700) += wndr4700.o
- obj-$(CONFIG_EBONY)	+= ebony.o
- obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
- obj-$(CONFIG_WARP)	+= warp.o
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -260,6 +260,19 @@ config ICON
- 	help
- 	  This option enables support for the AMCC PPC440SPe evaluation board.
- 
-+config WNDR4700
-+	bool "WNDR4700"
-+	depends on 44x
-+	default n
-+	select APM821xx
-+	select PCI_MSI
-+	select PPC4xx_MSI
-+	select PPC4xx_PCI_EXPRESS
-+	select IBM_EMAC_RGMII
-+	select 460EX
-+	help
-+	  This option enables support for the Netgear WNDR4700/WNDR4720 board.
-+
- config XILINX_VIRTEX440_GENERIC_BOARD
- 	bool "Generic Xilinx Virtex 5 FXT board support"
- 	depends on 44x
diff --git a/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch
deleted file mode 100644
index 110726d258..0000000000
--- a/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
- 	u32 val;
- 
- 	/*
--	 * Do a software reset on PCIe ports.
--	 * This code is to fix the issue that pci drivers doesn't re-assign
--	 * bus number for PCIE devices after Uboot
--	 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
--	 * PT quad port, SAS LSI 1064E)
-+	 * Only reset the PHY when no link is currently established.
-+	 * This is for the Atheros PCIe board which has problems to establish
-+	 * the link (again) after this PHY reset. All other currently tested
-+	 * PCIe boards don't show this problem.
- 	 */
--
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
--	mdelay(10);
-+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+	if (!(val & 0x00001000)) {
-+		/*
-+		 * Do a software reset on PCIe ports.
-+		 * This code is to fix the issue that pci drivers doesn't re-assign
-+		 * bus number for PCIE devices after Uboot
-+		 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-+		 * PT quad port, SAS LSI 1064E)
-+		 */
-+
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-+		mdelay(10);
-+	}
- 
- 	if (port->endpoint)
- 		val = PTYPE_LEGACY_ENDPOINT << 20;
-@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
- 	mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
- 	mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
- 
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
--	mdelay(50);
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+	if (!(val & 0x00001000)) {
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-+		mdelay(50);
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+	}
- 
- 	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- 		mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
diff --git a/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch
deleted file mode 100644
index 6eb04b2c25..0000000000
--- a/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1905,9 +1905,9 @@ static void __init ppc4xx_configure_pcie
- 		 * if it works
- 		 */
- 		out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
--		out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
-+		out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
- 		out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
--		out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
-+		out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
- 		out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- 		out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
- 
diff --git a/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
deleted file mode 100644
index 6db2f2ec27..0000000000
--- a/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
+++ /dev/null
@@ -1,545 +0,0 @@
-From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 2 Jun 2016 00:48:46 +0200
-Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
- w/o ROM
-
-This patch adds a firmware loader for the uPD720201K8-711-BAC-A
-and uPD720202K8-711-BAA-A variant. Both of these chips are listed
-in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
-devices which need the firmware loader on page 2 in order to
-work as they "do not support the External ROM".
-
-The "Firmware Download Sequence" is describe in chapter
-"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
-
-The firmware "K2013080.mem" is available from a USB3.0 Host to
-PCIe Adapter (PP2U-E card) "Firmware download" archive. An
-alternative version can be sourced from Netgear's WNDR4700 GPL
-archives.
-
-The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
-(2012-06-15) state that the firmware is for the following devices:
- - uPD720201 ES 2.0 sample whose revision ID is 2.
- - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-
-If someone from Renesas is listening: It would be great, if these
-firmwares could be added to linux-firmware.git.
-
-Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
----
- drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 492 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -12,6 +12,8 @@
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/acpi.h>
-+#include <linux/firmware.h>
-+#include <asm/unaligned.h>
- 
- #include "xhci.h"
- #include "xhci-trace.h"
-@@ -262,6 +264,458 @@ static void xhci_pme_acpi_rtd3_enable(st
- static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
- #endif /* CONFIG_ACPI */
- 
-+static const struct renesas_fw_entry {
-+	const char *firmware_name;
-+	u16 device;
-+	u8 revision;
-+	u16 expected_version;
-+} renesas_fw_table[] = {
-+	/*
-+	 * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
-+	 * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
-+	 * need the software loader.
-+	 *
-+	 * PP2U/ReleaseNote_USB3-201-202-FW.txt:
-+	 *
-+	 * Note: This firmware is for the following devices.
-+	 *  - uPD720201 ES 2.0 sample whose revision ID is 2.
-+	 *  - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
-+	 *  - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-+	 */
-+	{ "K2013080.mem", 0x0014, 0x02, 0x2013 },
-+	{ "K2013080.mem", 0x0014, 0x03, 0x2013 },
-+	{ "K2013080.mem", 0x0015, 0x02, 0x2013 },
-+};
-+
-+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
-+{
-+	const struct renesas_fw_entry *entry;
-+	size_t i;
-+
-+	/* This loader will only work with a RENESAS device. */
-+	if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
-+		return NULL;
-+
-+	for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
-+		entry = &renesas_fw_table[i];
-+		if (entry->device == dev->device &&
-+		    entry->revision == dev->revision)
-+			return entry;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int renesas_fw_download_image(struct pci_dev *dev,
-+				     const u32 *fw,
-+				     size_t step)
-+{
-+	size_t i;
-+	int err;
-+	u8 fw_status;
-+	bool data0_or_data1;
-+
-+	/*
-+	 * The hardware does alternate between two 32-bit pages.
-+	 * (This is because each row of the firmware is 8 bytes).
-+	 *
-+	 * for even steps we use DATA0, for odd steps DATA1.
-+	 */
-+	data0_or_data1 = (step & 1) == 1;
-+
-+	/* step+1. Read "Set DATAX" and confirm it is cleared. */
-+	for (i = 0; i < 10000; i++) {
-+		err = pci_read_config_byte(dev, 0xF5, &fw_status);
-+		if (err)
-+			return pcibios_err_to_errno(err);
-+		if (!(fw_status & BIT(data0_or_data1)))
-+			break;
-+
-+		udelay(1);
-+	}
-+	if (i == 10000)
-+		return -ETIMEDOUT;
-+
-+	/*
-+	 * step+2. Write FW data to "DATAX".
-+	 * "LSB is left" => force little endian
-+	 */
-+	err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
-+				     (__force u32) cpu_to_le32(fw[step]));
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	udelay(100);
-+
-+	/* step+3. Set "Set DATAX". */
-+	err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	return 0;
-+}
-+
-+static int renesas_fw_verify(struct pci_dev *dev,
-+			     const void *fw_data,
-+			     size_t length)
-+{
-+	const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
-+	u16 fw_version_pointer;
-+	u16 fw_version;
-+
-+	if (!entry)
-+		return -EINVAL;
-+
-+	/*
-+	 * The Firmware's Data Format is describe in
-+	 * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
-+	 */
-+
-+	/* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
-+	if (length % 8 != 0) {
-+		dev_err(&dev->dev, "firmware size is not a multipe of 8.");
-+		return -EINVAL;
-+	}
-+
-+	/*
-+	 * The bootrom chips of the big brother have sizes up to 64k, let's
-+	 * assume that's the biggest the firmware can get.
-+	 */
-+	if (length < 0x1000 || length >= 0x10000) {
-+		dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
-+			length);
-+		return -EINVAL;
-+	}
-+
-+	/* The First 2 bytes are fixed value (55aa). "LSB on Left" */
-+	if (get_unaligned_le16(fw_data) != 0x55aa) {
-+		dev_err(&dev->dev, "no valid firmware header found.");
-+		return -EINVAL;
-+	}
-+
-+	/* verify the firmware version position and print it. */
-+	fw_version_pointer = get_unaligned_le16(fw_data + 4);
-+	if (fw_version_pointer + 2 >= length) {
-+		dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
-+		return -EINVAL;
-+	}
-+
-+	fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
-+	dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
-+
-+	if (fw_version != entry->expected_version) {
-+		dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
-+			 entry->expected_version);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int renesas_fw_check_running(struct pci_dev *pdev)
-+{
-+	int err;
-+	u8 fw_state;
-+
-+	/*
-+	 * Test if the device is actually needing the firmware. As most
-+	 * BIOSes will initialize the device for us. If the device is
-+	 * initialized.
-+	 */
-+	err = pci_read_config_byte(pdev, 0xF4, &fw_state);
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	/*
-+	 * Check if "FW Download Lock" is locked. If it is and the FW is
-+	 * ready we can simply continue. If the FW is not ready, we have
-+	 * to give up.
-+	 */
-+	if (fw_state & BIT(1)) {
-+		dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
-+
-+		if (fw_state & BIT(4))
-+			return 0;
-+
-+		dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
-+		return -EIO;
-+	}
-+
-+	/*
-+	 * Check if "FW Download Enable" is set. If someone (us?) tampered
-+	 * with it and it can't be resetted, we have to give up too... and
-+	 * ask for a forgiveness and a reboot.
-+	 */
-+	if (fw_state & BIT(0)) {
-+		dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
-+		return -EIO;
-+	}
-+
-+	/* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
-+	switch ((fw_state & 0x70)) {
-+	case 0: /* No result yet */
-+		dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
-+
-+		/* tell the caller, that this device needs the firmware. */
-+		return 1;
-+
-+	case BIT(4): /* Success, device should be working. */
-+		dev_dbg(&pdev->dev, "FW is ready.");
-+		return 0;
-+
-+	case BIT(5): /* Error State */
-+		dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
-+		return -ENODEV;
-+
-+	default: /* All other states are marked as "Reserved states" */
-+		dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
-+			(fw_state & 0x70) >> 4);
-+		return -EINVAL;
-+	}
-+}
-+
-+static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
-+{
-+#if 0
-+	u32 val;
-+
-+	/*
-+	 * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
-+	 * 'RUN/STOP' of USBCMD Register is set"
-+	 */
-+	val = readl(hcd->regs + 0x20);
-+	if (val & BIT(0)) {
-+		dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
-+		return -EBUSY;
-+	}
-+#endif
-+	return 0;
-+}
-+
-+static int renesas_fw_download(struct pci_dev *pdev,
-+	const struct firmware *fw, unsigned int retry_counter)
-+{
-+	const u32 *fw_data = (const u32 *) fw->data;
-+	size_t i;
-+	int err;
-+	u8 fw_status;
-+
-+	/*
-+	 * For more information and the big picture: please look at the
-+	 * "Firmware Download Sequence" in "7.1 FW Download Interface"
-+	 * of R19UH0078EJ0500 Rev.5.00 page 131
-+	 */
-+	err = renesas_hw_check_run_stop_busy(pdev);
-+	if (err)
-+		return err;
-+
-+	/*
-+	 * 0. Set "FW Download Enable" bit in the
-+	 * "FW Download Control & Status Register" at 0xF4
-+	 */
-+	err = pci_write_config_byte(pdev, 0xF4, BIT(0));
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	/* 1 - 10 follow one step after the other. */
-+	for (i = 0; i < fw->size / 4; i++) {
-+		err = renesas_fw_download_image(pdev, fw_data, i);
-+		if (err) {
-+			dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
-+				 i, i * 4, err);
-+			return err;
-+		}
-+	}
-+
-+	/*
-+	 * This sequence continues until the last data is written to
-+	 * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
-+	 * is cleared by the hardware beforehand.
-+	 */
-+	for (i = 0; i < 10000; i++) {
-+		err = pci_read_config_byte(pdev, 0xF5, &fw_status);
-+		if (err)
-+			return pcibios_err_to_errno(err);
-+		if (!(fw_status & (BIT(0) | BIT(1))))
-+			break;
-+
-+		udelay(1);
-+	}
-+	if (i == 10000)
-+		dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
-+
-+	/*
-+	 * 11. After finishing writing the last data of FW, the
-+	 * System Software must clear "FW Download Enable"
-+	 */
-+	err = pci_write_config_byte(pdev, 0xF4, 0);
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	/* 12. Read "Result Code" and confirm it is good. */
-+	for (i = 0; i < 10000; i++) {
-+		err = pci_read_config_byte(pdev, 0xF4, &fw_status);
-+		if (err)
-+			return pcibios_err_to_errno(err);
-+		if (fw_status & BIT(4))
-+			break;
-+
-+		udelay(1);
-+	}
-+	if (i == 10000) {
-+		/* Timed out / Error - let's see if we can fix this */
-+		err = renesas_fw_check_running(pdev);
-+		switch (err) {
-+		case 0: /*
-+			 * we shouldn't end up here.
-+			 * maybe it took a little bit longer.
-+			 * But all should be well?
-+			 */
-+			break;
-+
-+		case 1: /* (No result yet? - we can try to retry) */
-+			if (retry_counter < 10) {
-+				retry_counter++;
-+				dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
-+					  retry_counter);
-+				return renesas_fw_download(pdev, fw,
-+							   retry_counter);
-+			}
-+			return -ETIMEDOUT;
-+
-+		default:
-+			return err;
-+		}
-+	}
-+	/*
-+	 * Optional last step: Engage Firmware Lock
-+	 *
-+	 * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
-+	 * if (err)
-+	 *	return pcibios_err_to_errno(err);
-+	 */
-+
-+	return 0;
-+}
-+
-+struct renesas_fw_ctx {
-+	struct pci_dev *pdev;
-+	const struct pci_device_id *id;
-+	bool resume;
-+};
-+
-+static int xhci_pci_probe(struct pci_dev *pdev,
-+			  const struct pci_device_id *id);
-+
-+static void renesas_fw_callback(const struct firmware *fw,
-+				void *context)
-+{
-+	struct renesas_fw_ctx *ctx = context;
-+	struct pci_dev *pdev = ctx->pdev;
-+	struct device *parent = pdev->dev.parent;
-+	int err = -ENOENT;
-+
-+	if (fw) {
-+		err = renesas_fw_verify(pdev, fw->data, fw->size);
-+		if (!err) {
-+			err = renesas_fw_download(pdev, fw, 0);
-+			release_firmware(fw);
-+			if (!err) {
-+				if (ctx->resume)
-+					return;
-+
-+				err = xhci_pci_probe(pdev, ctx->id);
-+				if (!err) {
-+					/* everything worked */
-+					devm_kfree(&pdev->dev, ctx);
-+					return;
-+				}
-+
-+				/* in case of an error - fall through */
-+			} else {
-+				dev_err(&pdev->dev, "firmware failed to download (%d).",
-+					err);
-+			}
-+		}
-+	} else {
-+		dev_err(&pdev->dev, "firmware failed to load (%d).", err);
-+	}
-+
-+	dev_info(&pdev->dev, "Unloading driver");
-+
-+	if (parent)
-+		device_lock(parent);
-+
-+	device_release_driver(&pdev->dev);
-+
-+	if (parent)
-+		device_unlock(parent);
-+
-+	pci_dev_put(pdev);
-+}
-+
-+static int renesas_fw_alive_check(struct pci_dev *pdev)
-+{
-+	const struct renesas_fw_entry *entry;
-+	int err;
-+
-+	/* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+	entry = renesas_needs_fw_dl(pdev);
-+	if (!entry)
-+		return 0;
-+
-+	err = renesas_fw_check_running(pdev);
-+	/* Also go ahead, if the firmware is running */
-+	if (err == 0)
-+		return 0;
-+
-+	/* At this point, we can be sure that the FW isn't ready. */
-+	return err;
-+}
-+
-+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
-+				     const struct pci_device_id *id,
-+				     bool do_resume)
-+{
-+	const struct renesas_fw_entry *entry;
-+	struct renesas_fw_ctx *ctx;
-+	int err;
-+
-+	/* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+	entry = renesas_needs_fw_dl(pdev);
-+	if (!entry)
-+		return 0;
-+
-+	err = renesas_fw_check_running(pdev);
-+	/* Continue ahead, if the firmware is already running. */
-+	if (err == 0)
-+		return 0;
-+
-+	if (err != 1)
-+		return err;
-+
-+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
-+	if (!ctx)
-+		return -ENOMEM;
-+	ctx->pdev = pdev;
-+	ctx->resume = do_resume;
-+	ctx->id = id;
-+
-+	pci_dev_get(pdev);
-+	err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
-+		&pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
-+	if (err) {
-+		pci_dev_put(pdev);
-+		return err;
-+	}
-+
-+	/*
-+	 * The renesas_fw_callback() callback will continue the probe
-+	 * process, once it aquires the firmware.
-+	 */
-+	return 1;
-+}
-+
- /* called during probe() after chip reset completes */
- static int xhci_pci_setup(struct usb_hcd *hcd)
- {
-@@ -300,6 +754,22 @@ static int xhci_pci_probe(struct pci_dev
- 	struct hc_driver *driver;
- 	struct usb_hcd *hcd;
- 
-+	/*
-+	 * Check if this device is a RENESAS uPD720201/2 device.
-+	 * Otherwise, we can continue with xhci_pci_probe as usual.
-+	 */
-+	retval = renesas_fw_download_to_hw(dev, id, false);
-+	switch (retval) {
-+	case 0:
-+		break;
-+
-+	case 1: /* let it load the firmware and recontinue the probe. */
-+		return 0;
-+
-+	default:
-+		return retval;
-+	}
-+
- 	driver = (struct hc_driver *)id->driver_data;
- 
- 	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -361,6 +831,16 @@ static void xhci_pci_remove(struct pci_d
- {
- 	struct xhci_hcd *xhci;
- 
-+	if (renesas_fw_alive_check(dev)) {
-+		/*
-+		 * bail out early, if this was a renesas device w/o FW.
-+		 * Else we might hit the NMI watchdog in xhci_handsake
-+		 * during xhci_reset as part of the driver's unloading.
-+		 * which we forced in the renesas_fw_callback().
-+		 */
-+		return;
-+	}
-+
- 	xhci = hcd_to_xhci(pci_get_drvdata(dev));
- 	xhci->xhc_state |= XHCI_STATE_REMOVING;
- 	if (xhci->shared_hcd) {
diff --git a/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch
deleted file mode 100644
index fc4553d2d8..0000000000
--- a/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 23 Jun 2016 20:28:20 +0200
-Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
- uPD720202
-
-The APM82181 does not support MSI-X. When probed, it will
-produce a noisy warning.
-
----
- drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 362 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -215,6 +215,7 @@ static void xhci_pci_quirks(struct devic
- 	    pdev->device == 0x0015) {
- 		xhci->quirks |= XHCI_RESET_ON_RESUME;
- 		xhci->quirks |= XHCI_ZERO_64B_REGS;
-+		xhci->quirks |= XHCI_FORCE_MSI;
- 	}
- 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
- 		xhci->quirks |= XHCI_RESET_ON_RESUME;
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -424,10 +424,14 @@ static int xhci_try_enable_msi(struct us
- 		free_irq(hcd->irq, hcd);
- 	hcd->irq = 0;
- 
--	ret = xhci_setup_msix(xhci);
--	if (ret)
--		/* fall back to msi*/
-+	if (xhci->quirks & XHCI_FORCE_MSI) {
- 		ret = xhci_setup_msi(xhci);
-+	} else {
-+		ret = xhci_setup_msix(xhci);
-+		if (ret)
-+			/* fall back to msi*/
-+			ret = xhci_setup_msi(xhci);
-+	}
- 
- 	if (!ret) {
- 		hcd->msi_enabled = 1;
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1867,6 +1867,7 @@ struct xhci_hcd {
- 	/* support xHCI 0.96 spec USB2 software LPM */
- 	unsigned		sw_lpm_support:1;
- 	/* support xHCI 1.0 spec USB2 hardware LPM */
-+#define XHCI_FORCE_MSI		(1 << 24)
- 	unsigned		hw_lpm_support:1;
- 	/* Broken Suspend flag for SNPS Suspend resume issue */
- 	unsigned		broken_suspend:1;
diff --git a/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch b/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch
deleted file mode 100644
index f8b30ae1b3..0000000000
--- a/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 17 Dec 2017 17:27:15 +0100
-Subject: [PATCH 1/2] hwmon: tc654 add detection routine
-
-This patch adds a detection routine for the TC654/TC655
-chips.  Both IDs are listed in the Datasheet.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -64,6 +64,11 @@ enum tc654_regs {
- /* Register data is read (and cached) at most once per second. */
- #define TC654_UPDATE_INTERVAL		HZ
- 
-+/* Manufacturer and Version Identification Register Values */
-+#define TC654_MFR_ID_MICROCHIP		0x84
-+#define TC654_VER_ID			0x00
-+#define TC655_VER_ID			0x01
-+
- struct tc654_data {
- 	struct i2c_client *client;
- 
-@@ -497,6 +502,29 @@ static const struct i2c_device_id tc654_
- 	{}
- };
- 
-+static int
-+tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
-+{
-+	struct i2c_adapter *adapter = new_client->adapter;
-+	int manufacturer, product;
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+		return -ENODEV;
-+
-+	manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
-+	if (manufacturer != TC654_MFR_ID_MICROCHIP)
-+		return -ENODEV;
-+
-+	product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
-+	if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
-+		return -ENODEV;
-+
-+	strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655",
-+		I2C_NAME_SIZE);
-+	return 0;
-+}
-+
-+
- MODULE_DEVICE_TABLE(i2c, tc654_id);
- 
- static struct i2c_driver tc654_driver = {
-@@ -505,6 +533,7 @@ static struct i2c_driver tc654_driver =
- 		   },
- 	.probe = tc654_probe,
- 	.id_table = tc654_id,
-+	.detect = tc654_detect,
- };
- 
- module_i2c_driver(tc654_driver);
diff --git a/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch
deleted file mode 100644
index 18ed8aecce..0000000000
--- a/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From 15ae701189744d321d3a1264ff46f8871e8765ee Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 17 Dec 2017 17:29:13 +0100
-Subject: [PATCH] hwmon: tc654: add thermal_cooling device
-
-This patch adds a thermaL_cooling device to the tc654 driver.
-This allows the chip to be used for DT-based cooling.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++++++++---------
- 1 file changed, 86 insertions(+), 17 deletions(-)
-
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -24,6 +24,7 @@
- #include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/slab.h>
-+#include <linux/thermal.h>
- #include <linux/util_macros.h>
- 
- enum tc654_regs {
-@@ -141,6 +142,9 @@ struct tc654_data {
- 			 * writable register used to control the duty
- 			 * cycle of the V OUT output.
- 			 */
-+
-+	/* optional cooling device */
-+	struct thermal_cooling_device *cdev;
- };
- 
- /* helper to grab and cache data, at most one time per second */
-@@ -376,36 +380,30 @@ static ssize_t set_pwm_mode(struct devic
- static const int tc654_pwm_map[16] = { 77,  88, 102, 112, 124, 136, 148, 160,
- 				      172, 184, 196, 207, 219, 231, 243, 255};
- 
-+static int get_pwm(struct tc654_data *data)
-+{
-+	if (data->config & TC654_REG_CONFIG_SDM)
-+		return 0;
-+	else
-+		return tc654_pwm_map[data->duty_cycle];
-+}
-+
- static ssize_t show_pwm(struct device *dev, struct device_attribute *da,
- 			char *buf)
- {
- 	struct tc654_data *data = tc654_update_client(dev);
--	int pwm;
- 
- 	if (IS_ERR(data))
- 		return PTR_ERR(data);
- 
--	if (data->config & TC654_REG_CONFIG_SDM)
--		pwm = 0;
--	else
--		pwm = tc654_pwm_map[data->duty_cycle];
--
--	return sprintf(buf, "%d\n", pwm);
-+	return sprintf(buf, "%d\n", get_pwm(data));
- }
- 
--static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
--		       const char *buf, size_t count)
-+static int _set_pwm(struct tc654_data *data, unsigned long val)
- {
--	struct tc654_data *data = dev_get_drvdata(dev);
- 	struct i2c_client *client = data->client;
--	unsigned long val;
- 	int ret;
- 
--	if (kstrtoul(buf, 10, &val))
--		return -EINVAL;
--	if (val > 255)
--		return -EINVAL;
--
- 	mutex_lock(&data->update_lock);
- 
- 	if (val == 0)
-@@ -425,6 +423,22 @@ static ssize_t set_pwm(struct device *de
- 
- out:
- 	mutex_unlock(&data->update_lock);
-+	return ret;
-+}
-+
-+static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
-+		       const char *buf, size_t count)
-+{
-+	struct tc654_data *data = dev_get_drvdata(dev);
-+	unsigned long val;
-+	int ret;
-+
-+	if (kstrtoul(buf, 10, &val))
-+		return -EINVAL;
-+	if (val > 255)
-+		return -EINVAL;
-+
-+	ret = _set_pwm(data, val);
- 	return ret < 0 ? ret : count;
- }
- 
-@@ -462,6 +476,47 @@ static struct attribute *tc654_attrs[] =
- 
- ATTRIBUTE_GROUPS(tc654);
- 
-+/* cooling device */
-+
-+static int tc654_get_max_state(struct thermal_cooling_device *cdev,
-+			       unsigned long *state)
-+{
-+	*state = 255;
-+	return 0;
-+}
-+
-+static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
-+                              unsigned long *state)
-+{
-+	struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+	if (IS_ERR(data))
-+		return PTR_ERR(data);
-+
-+	*state = get_pwm(data);
-+	return 0;
-+}
-+
-+static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
-+			       unsigned long state)
-+{
-+	struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+	if (IS_ERR(data))
-+		return PTR_ERR(data);
-+
-+	if (state > 255)
-+		return -EINVAL;
-+
-+	return _set_pwm(data, state);
-+}
-+
-+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
-+	.get_max_state = tc654_get_max_state,
-+	.get_cur_state = tc654_get_cur_state,
-+	.set_cur_state = tc654_set_cur_state,
-+};
-+
- /*
-  * device probe and removal
-  */
-@@ -493,7 +548,21 @@ static int tc654_probe(struct i2c_client
- 	hwmon_dev =
- 	    devm_hwmon_device_register_with_groups(dev, client->name, data,
- 						   tc654_groups);
--	return PTR_ERR_OR_ZERO(hwmon_dev);
-+	if (IS_ERR(hwmon_dev))
-+		return PTR_ERR(hwmon_dev);
-+
-+#if IS_ENABLED(CONFIG_OF)
-+	/* Optional cooling device register for Device tree platforms */
-+	data->cdev = thermal_of_cooling_device_register(client->dev.of_node,
-+							"tc654", hwmon_dev,
-+							&tc654_fan_cool_ops);
-+#else /* CONFIG_OF */
-+	/* Optional cooling device register for non Device tree platforms */
-+	data->cdev = thermal_cooling_device_register("tc654", hwmon_dev,
-+						     &tc654_fan_cool_ops);
-+#endif /* CONFIG_OF */
-+
-+	return PTR_ERR_OR_ZERO(data->cdev);
- }
- 
- static const struct i2c_device_id tc654_id[] = {
diff --git a/target/linux/ar7/Makefile b/target/linux/ar7/Makefile
deleted file mode 100644
index 1f789ca71f..0000000000
--- a/target/linux/ar7/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mipsel
-BOARD:=ar7
-BOARDNAME:=TI AR7
-FEATURES:=squashfs atm low_mem
-MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-SUBTARGETS:=generic ac49x
-
-KERNEL_PATCHVER:=4.9
-
-define Target/Description
-	Build firmware images for TI AR7 based routers.
-endef
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES+= swconfig
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/ar7/ac49x/config-default b/target/linux/ar7/ac49x/config-default
deleted file mode 100644
index d56df86682..0000000000
--- a/target/linux/ar7/ac49x/config-default
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_AR7_AC49X=y
-CONFIG_AR7_TYPE_AC49X=y
-# CONFIG_AR7_TYPE_TI is not set
-CONFIG_MTD_AC49X_PARTS=y
diff --git a/target/linux/ar7/ac49x/profiles/210-None.mk b/target/linux/ar7/ac49x/profiles/210-None.mk
deleted file mode 100644
index 2fcfacde9f..0000000000
--- a/target/linux/ar7/ac49x/profiles/210-None.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/None
-  NAME:=No WiFi
-  PACKAGES:=
-endef
-
-define Profile/None/Description
-	Package set without WiFi support
-endef
-$(eval $(call Profile,None))
-
diff --git a/target/linux/ar7/ac49x/target.mk b/target/linux/ar7/ac49x/target.mk
deleted file mode 100644
index 47f3ab282d..0000000000
--- a/target/linux/ar7/ac49x/target.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-
-SUBTARGET:=ac49x
-BOARDNAME:=AudioCodes AC49x
-
-define Target/Description
-	Build firmware images for AudioCodes AC49x based routers.
-endef
diff --git a/target/linux/ar7/base-files.mk b/target/linux/ar7/base-files.mk
deleted file mode 100644
index f21a604b83..0000000000
--- a/target/linux/ar7/base-files.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-define Build/Compile
-	$(call Build/Compile/Default)
-	$(TARGET_CC) -o $(PKG_BUILD_DIR)/adam2patcher $(PLATFORM_DIR)/src/adam2patcher.c
-endef
-
-define Package/base-files/install-target
-	mkdir -p $(1)/sbin
-	$(CP) $(PKG_BUILD_DIR)/adam2patcher $(1)/sbin
-endef
-
-
diff --git a/target/linux/ar7/base-files/etc/board.d/02_network b/target/linux/ar7/base-files/etc/board.d/02_network
deleted file mode 100755
index c1c2dc42fe..0000000000
--- a/target/linux/ar7/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175A/1:00" -o \
-     -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/1:00" ] && \
-   [ -x /sbin/swconfig ];
-then
-	ucidef_add_switch "eth0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
-
-elif [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/1:00" -o \
-       -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/1:10" ];
-then
-	ucidef_set_interface_lan "eth0.1"
-
-elif [ -d "/sys/class/net/eth1" ]; then
-	ucidef_set_interface_lan "eth0 eth1"
-
-else
-	ucidef_set_interface_lan "eth0"
-fi
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ar7/base-files/etc/diag.sh b/target/linux/ar7/base-files/etc/diag.sh
deleted file mode 100644
index f9aa809405..0000000000
--- a/target/linux/ar7/base-files/etc/diag.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2007-2013 OpenWrt.org
-
-. /lib/functions/leds.sh
-
-get_status_led() {
-	[ -d "/sys/class/leds/status" ] && status_led="status"
-	[ -d "/sys/class/leds/power:green" ] && status_led="power:green"
-}
-
-set_state() {
-	get_status_led
-
-	case "$1" in
-	preinit)
-		status_led_blink_preinit
-		;;
-	failsafe)
-		status_led_blink_failsafe
-		;;
-	preinit_regular)
-		status_led_blink_preinit_regular
-		;;
-	done)
-		status_led_on
-
-		[ "$status_led" = "power:green" ] && {
-			led_off "power:red"
-		}
-		;;
-	esac
-}
diff --git a/target/linux/ar7/base-files/etc/init.d/adam2 b/target/linux/ar7/base-files/etc/init.d/adam2
deleted file mode 100755
index 6b786270ea..0000000000
--- a/target/linux/ar7/base-files/etc/init.d/adam2
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh /etc/rc.common
-# ADAM2 patcher for Netgear DG834 and compatible
-# Copyright (C) 2006 OpenWrt.org
-
-START=00
-start() {
-	MD5="$(md5sum /dev/mtdblock0  | awk '{print $1}')"
-	[ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && {
-		mtd unlock adam2
-		/sbin/adam2patcher /dev/mtdblock0
-	}
-	rm -f /etc/rc.d/S${START}adam2 /etc/init.d/adam2 /sbin/adam2patcher >&- 2>&-
-}
diff --git a/target/linux/ar7/config-4.9 b/target/linux/ar7/config-4.9
deleted file mode 100644
index 95a5375bae..0000000000
--- a/target/linux/ar7/config-4.9
+++ /dev/null
@@ -1,151 +0,0 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_AR7=y
-CONFIG_AR7_TI=y
-# CONFIG_AR7_TYPE_AC49X is not set
-CONFIG_AR7_TYPE_TI=y
-CONFIG_AR7_WDT=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOOT_ELF32=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPMAC=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_AC49X_PARTS is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MVSWITCH_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-# CONFIG_OF is not set
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_RCU_STALL_COMMON is not set
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SRCU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_VLYNQ=y
-# CONFIG_VLYNQ_DEBUG is not set
diff --git a/target/linux/ar7/files/drivers/mtd/ac49xpart.c b/target/linux/ar7/files/drivers/mtd/ac49xpart.c
deleted file mode 100644
index 4f8a9c1b84..0000000000
--- a/target/linux/ar7/files/drivers/mtd/ac49xpart.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * AudioCodes AC49x PSPBoot-based flash partition table
- * Copyright 2012 Daniel Golle <daniel.golle@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/bootmem.h>
-#include <linux/magic.h>
-#include <linux/module.h>
-
-#include <asm/mach-ar7/prom.h>
-
-#define AC49X_MAXENVPARTS	8
-
-#define AC49X_PARTTYPE_LOADER	0
-#define AC49X_PARTTYPE_BOOTENV	1
-#define AC49X_PARTTYPE_LINUX	2
-#define AC49X_PARTTYPE_ROOTFS	3
-#define AC49X_PARTTYPE_UNKNOWN	4
-#define AC49X_NUM_PARTTYPES	5
-
-#define AC49X_FLASH_ADDRMASK	0x00FFFFFF
-
-#define AC49X_LOADER_MAGIC	0x40809000
-#define AC49X_LINUX_MAGIC	0x464c457f /*  ELF */
-#define AC49X_BOOTENV_MAGIC	0x4578614d /* MaxE */
-
-#define ROOTFS_MIN_OFFSET	0xC0000
-
-int parse_partvar(const unsigned char *partvar, struct mtd_partition *part)
-{
-	unsigned int partstart, partend;
-	unsigned int pnum;
-
-	pnum = sscanf(partvar, "0x%x,0x%x", &partstart, &partend);
-	if (pnum != 2)
-		return 1;
-
-	part->offset = partstart & AC49X_FLASH_ADDRMASK;
-	part->size = partend - partstart;
-
-	return 0;
-}
-
-int detect_parttype(struct mtd_info *master, struct mtd_partition part)
-{
-	unsigned int magic;
-	size_t len;
-
-	if (part.size < 4)
-		return -1;
-
-	mtd_read(master, part.offset, sizeof(magic), &len,
-		 (uint8_t *)&magic);
-
-	if (len != sizeof(magic))
-		return -1;
-
-	switch (magic) {
-	case AC49X_LOADER_MAGIC:
-		return AC49X_PARTTYPE_LOADER;
-	case AC49X_LINUX_MAGIC:
-		return AC49X_PARTTYPE_LINUX;
-	case SQUASHFS_MAGIC:
-	case CRAMFS_MAGIC:
-	case CRAMFS_MAGIC_WEND:
-		return AC49X_PARTTYPE_ROOTFS;
-	case AC49X_BOOTENV_MAGIC:
-		return AC49X_PARTTYPE_BOOTENV;
-	default:
-		switch (magic & 0xFF) {
-		case JFFS2_SUPER_MAGIC:
-			return AC49X_PARTTYPE_ROOTFS;
-		}
-		switch (magic >> 8) {
-		case JFFS2_SUPER_MAGIC:
-			return AC49X_PARTTYPE_ROOTFS;
-		}
-		return AC49X_PARTTYPE_UNKNOWN;
-	}
-}
-
-const char *partnames[] = {
-	"loader",
-	"config",
-	"linux",
-	"rootfs",
-	"data"
-};
-
-void gen_partname(unsigned int type,
-		  unsigned int *typenumeration,
-		  struct mtd_partition *part)
-{
-	char *s  = kzalloc(sizeof(char) * 8, GFP_KERNEL);
-
-	(typenumeration[type])++;
-	if (typenumeration[type] == 1)
-		sprintf(s, "%s", partnames[type]);
-	else
-		sprintf(s, "%s%d", partnames[type], typenumeration[type]);
-
-	part->name = s;
-}
-
-static int create_mtd_partitions(struct mtd_info *master,
-				 const struct mtd_partition **pparts,
-				 struct mtd_part_parser_data *data)
-{
-	unsigned int envpartnum = 0, linuxpartnum = 0;
-	unsigned int typenumeration[5] = { 0, 0, 0, 0, 0 };
-	unsigned char evn[5];
-	const unsigned char *partvar = NULL;
-
-	struct mtd_partition *ac49x_parts;
-
-	ac49x_parts = kzalloc(sizeof(*ac49x_parts) * AC49X_MAXENVPARTS,
-				GFP_KERNEL);
-
-	if (!ac49x_parts)
-		return -ENOMEM;
-
-	linuxpartnum = 0;
-	for (envpartnum = 0; envpartnum < AC49X_MAXENVPARTS; envpartnum++) {
-		struct mtd_partition parsepart;
-		unsigned int offset, size, type;
-		int err;
-		sprintf(evn, "mtd%d", envpartnum);
-		partvar = prom_getenv(evn);
-		if (!partvar)
-			continue;
-		err = parse_partvar(partvar, &parsepart);
-		if (err)
-			continue;
-		offset = parsepart.offset;
-		size = parsepart.size;
-		type = detect_parttype(master, parsepart);
-		gen_partname(type, typenumeration, &parsepart);
-		/* protect loader */
-		if (type == AC49X_PARTTYPE_LOADER)
-			parsepart.mask_flags = MTD_WRITEABLE;
-		else
-			parsepart.mask_flags = 0;
-
-		memcpy(&(ac49x_parts[linuxpartnum]), &parsepart,
-			sizeof(struct mtd_partition));
-
-		/* scan for contained rootfs */
-		if (type == AC49X_PARTTYPE_LINUX) {
-			parsepart.offset += ROOTFS_MIN_OFFSET &
-						~(master->erasesize - 1);
-			parsepart.size -= ROOTFS_MIN_OFFSET &
-						~(master->erasesize - 1);
-			do {
-				unsigned int size, offset;
-				size = parsepart.size;
-				offset = parsepart.offset;
-
-				type = detect_parttype(master, parsepart);
-				if (type == AC49X_PARTTYPE_ROOTFS) {
-					gen_partname(type, typenumeration,
-							&parsepart);
-					printk(KERN_INFO
-						"%s %s: 0x%08x@0x%08x\n",
-						"detected sub-partition",
-						parsepart.name,
-						(unsigned int)parsepart.size,
-						(unsigned int)parsepart.offset);
-					linuxpartnum++;
-					memcpy(&(ac49x_parts[linuxpartnum]),
-						&parsepart,
-						sizeof(struct mtd_partition));
-					break;
-				}
-				parsepart.offset += master->erasesize;
-				parsepart.size -= master->erasesize;
-			} while (parsepart.size >= master->erasesize);
-		}
-		linuxpartnum++;
-	}
-
-	*pparts = ac49x_parts;
-	return linuxpartnum;
-}
-
-static struct mtd_part_parser ac49x_parser = {
-	.owner = THIS_MODULE,
-	.parse_fn = create_mtd_partitions,
-	.name = "ac49xpart",
-};
-
-static int __init ac49x_parser_init(void)
-{
-	register_mtd_parser(&ac49x_parser);
-	return 0;
-}
-
-module_init(ac49x_parser_init);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Daniel Golle <daniel.golle@gmail.com>");
-MODULE_DESCRIPTION("MTD partitioning for AudioCodes AC49x");
diff --git a/target/linux/ar7/files/drivers/mtd/titanpart.c b/target/linux/ar7/files/drivers/mtd/titanpart.c
deleted file mode 100644
index a6403f6ce2..0000000000
--- a/target/linux/ar7/files/drivers/mtd/titanpart.c
+++ /dev/null
@@ -1,234 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/bootmem.h>
-#include <linux/magic.h>
-#include <asm/mach-ar7/prom.h>
-
-#define IMAGE_A_SIZE 0X3c0000
-#define WRTP_PARTS	14
-#define NSP_IMG_MAGIC_NUMBER		le32_to_cpu(0x4D544443)
-#define NSP_IMG_SECTION_TYPE_KERNEL		(0x01)
-#define NSP_IMG_SECTION_TYPE_FILESYSTEM_ROOT	(0x02)
-#define NSP_IMG_SECTION_TYPE_FILESYSTEM		(0x03)
-#define MAX_NUM_PARTITIONS 14
-
-static int part_count=0;
-static struct mtd_partition titan_parts[WRTP_PARTS];
-
-
-struct nsp_img_hdr_head
-{
-	unsigned int	magic;		/* Magic number to identify this image header */
-	unsigned int	boot_offset;	/* Offset from start of header to kernel code. */
-	unsigned int	flags;		/* Image flags. */
-	unsigned int	hdr_version;	/* Version of this header. */
-	unsigned int	hdr_size;	/* The complete size of all portions of the header */
-	unsigned int	prod_id;	/* This product id */
-	unsigned int	rel_id;		/* Which release this is */
-	unsigned int	version;	/* name-MMM.nnn.ooo-rxx => 0xMMnnooxx. See comment
-					   below */
-	unsigned int	image_size;	/* Image size (including header) */
-	unsigned int	info_offset;	/* Offset from start of header to info block */
-	unsigned int	sect_info_offset;	/* Offset from start of header to section desc */
-	unsigned int	chksum_offset;	/* Offset from start of header to chksum block */
-	unsigned int    pad1;
-};
-
-struct nsp_img_hdr_section_info
-{
-	unsigned int	num_sects;	/* Number of section (and section desc blocks) in this image */
-	unsigned int	sect_size;	/* Size of a SINGLE section_desc block */
-	unsigned int	sections_offset;	/* Offset to from start of header to the start of the section blocks */
-};
-
-/* There will be one of more of the following stuctures in the image header. Each
-   section will have one of these blocks. */
-struct nsp_img_hdr_sections
-{
-	unsigned int	offset;		/* Offset of section from start of NSP_IMG_HDR_HEAD */
-	unsigned int	total_size;	/* Size of section (including pad size.) */
-	unsigned int	raw_size;	/* Size of section only */
-	unsigned int	flags;		/* Section flags */
-	unsigned int	chksum;		/* Section checksum */
-	unsigned int	type;		/* Section type. What kind of info does this section describe */
-	char		name[16];	/* Reference name for this section. */
-};
-
-
-
-
-
-static int	titan_parse_env_address(char *env_name, unsigned int *flash_base,
-				unsigned int *flash_end)
-{
-	char	image_name[30];
-	char	*env_ptr;
-	char	*base_ptr;
-	char	*end_ptr;
-	char * string_ptr;
-	/* Get the image variable */
-	env_ptr = prom_getenv(env_name);
-	if(!env_ptr){
-		printk("titan: invalid env name, %s.\n", env_name);
-		return -1;	/* Error, no image variable */
-	}
-	strncpy(image_name, env_ptr, 30);
-	image_name[29]=0;
-	string_ptr = image_name;
-	/* Extract the start and stop addresses of the partition */
-	base_ptr = strsep(&string_ptr, ",");
-	end_ptr = strsep(&string_ptr, ",");
-	if ((base_ptr == NULL) || (end_ptr == NULL)) {	
-		printk("titan: Couldn't tokenize %s start,end.\n", image_name);
-		return -1;
-	}
-
-	*flash_base = (unsigned int) simple_strtol(base_ptr, NULL, 0);
-	*flash_end = (unsigned int) simple_strtol(end_ptr, NULL, 0);
-	if((!*flash_base) || (!*flash_end)) {
-		printk("titan: Unable to convert :%s: :%s: into start,end values.\n",
-				env_name, image_name);
-		return -1;
-	}
-	*flash_base &= 0x0fffffff;
-	*flash_end &= 0x0fffffff;
-	return 0;
-}
-
-
-
-static int	titan_get_single_image(char *bootcfg_name, unsigned int *flash_base,
-				unsigned int *flash_end)
-{
-	char	*env_ptr;
-	char	*base_ptr;
-	char	*end_ptr;
-	char	image_name[30];
-	char * string_ptr;
-
-	if(!bootcfg_name || !flash_base || !flash_end)
-		return -1;
-
-	env_ptr = prom_getenv(bootcfg_name);
-	if(!env_ptr){
-		printk("titan: %s variable not found.\n", bootcfg_name);
-		return -1;	/* Error, no bootcfg variable */
-	}
-
-	string_ptr = image_name;
-	/* Save off the image name */
-	strncpy(image_name, env_ptr, 30);
-	image_name[29]=0;
-
-	end_ptr=strsep(&string_ptr, "\"");
-	base_ptr=strsep(&string_ptr, "\"");		/* Loose the last " */
-	if(!end_ptr || !base_ptr){
-		printk("titan: invalid bootcfg format, %s.\n", image_name);
-		return -1;	/* Error, invalid bootcfg variable */
-	}
-
-	/* Now, parse the addresses */
-	return titan_parse_env_address(base_ptr, flash_base, flash_end);
-}
-
-
-
-static void titan_add_partition(char * env_name, unsigned int flash_base, unsigned int flash_end)
-{
-		titan_parts[part_count].name = env_name;
-		titan_parts[part_count].offset = flash_base;
-		titan_parts[part_count].size = flash_end-flash_base;
-		titan_parts[part_count].mask_flags = (strcmp(env_name, "bootloader")==0|| 
-			strcmp(env_name, "boot_env")==0 ||
-			strcmp(env_name, "full_image")==0 )?MTD_WRITEABLE:0;
-		part_count++;
-
-}
-int create_titan_partitions(struct mtd_info *master,
-	struct mtd_partition **pparts,
-	unsigned long origin)
-{
-	struct nsp_img_hdr_head		hdr;
-	struct nsp_img_hdr_section_info	sect_info;
-	struct nsp_img_hdr_sections	section;
-	unsigned int			flash_base, flash_end;
-	unsigned int			start, end;
-	char				*name;
-	int	i;
-	int	total_sects=0;
-	size_t len;
-
-	/* Get the bootcfg env variable first */
-	if(titan_get_single_image("BOOTCFG", &flash_base, &flash_end)) {
-		/* Error, fallback */
-		return -1;
-	}
-
-	/* Get access to the header, and do some validation checks */
-	//hdr=(struct nsp_img_hdr_head*)flash_base;
-	mtd_read(master, flash_base, sizeof(struct nsp_img_hdr_head), &len, (uint8_t *)&hdr);
-	if(hdr.magic != NSP_IMG_MAGIC_NUMBER)
-		return -1;	/* Not a single image */
-
-	mtd_read(master, flash_base + hdr.sect_info_offset, sizeof(struct nsp_img_hdr_section_info), &len, (uint8_t *)&sect_info);
-
-	/* Look for the root fs, and add it first. This way we KNOW where the rootfs is */
-	for(i=0; i< sect_info.num_sects && i<MAX_NUM_PARTITIONS; i++){
-		mtd_read(master, flash_base + sect_info.sections_offset + (i * sect_info.sect_size) , sizeof(struct nsp_img_hdr_sections), &len, (uint8_t *)&section);
-		/* Add only the root partition */
-		if(section.type != NSP_IMG_SECTION_TYPE_FILESYSTEM_ROOT){
-			continue;
-		}
-		start=flash_base + section.offset;
-		end=start + section.total_size;
-		titan_add_partition("root", start, end);
-		total_sects++;
-		
-	}
-
-	for(i=0; i< sect_info.num_sects && i<MAX_NUM_PARTITIONS; i++){
-
-		mtd_read(master, flash_base + sect_info.sections_offset + (i * sect_info.sect_size) , sizeof(struct nsp_img_hdr_sections), &len, (uint8_t *)&section);
-
-		name=section.name;
-		if(section.type == NSP_IMG_SECTION_TYPE_FILESYSTEM_ROOT)
-		{
-			name = "rootfs";
-			start=flash_base + section.offset;
-			end=flash_end;
-			titan_add_partition(name, start, end);
-			total_sects++;
-		}
-		else if(section.type == NSP_IMG_SECTION_TYPE_KERNEL)
-		{
-			name = "kernel";
-			start=flash_base + section.offset;
-			end=start + section.total_size;
-			titan_add_partition(name, start, end);
-			total_sects++;
-		}
-
-	}
-
-	/* Next, lets add the single image */
-	titan_add_partition("primary_image", flash_base, flash_end);
-	total_sects++;
-
-
-	titan_add_partition("full_image", 0,  master->size);
-	total_sects++;
-
-	if (!titan_parse_env_address("BOOTLOADER", &start, &end)){
-		titan_add_partition("bootloader", start, end);
-		total_sects++;
-	}
-	if (!titan_parse_env_address("boot_env", &start, &end)){
-		titan_add_partition("boot_env", start, end);
-		total_sects++;
-	}
-	*pparts = titan_parts;
-	return total_sects;
-}
diff --git a/target/linux/ar7/generic/config-default b/target/linux/ar7/generic/config-default
deleted file mode 100644
index 10d46e9c26..0000000000
--- a/target/linux/ar7/generic/config-default
+++ /dev/null
@@ -1,5 +0,0 @@
-CONFIG_AR7_TI=y
-# CONFIG_AR7_TYPE_AC49X is not set
-CONFIG_AR7_TYPE_TI=y
-# CONFIG_MTD_AC49X_PARTS is not set
-CONFIG_MTD_AR7_PARTS=y
diff --git a/target/linux/ar7/generic/profiles/100-Annex-A.mk b/target/linux/ar7/generic/profiles/100-Annex-A.mk
deleted file mode 100644
index d8e549ea65..0000000000
--- a/target/linux/ar7/generic/profiles/100-Annex-A.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Annex-A
-  NAME:=Annex-A DSL firmware (default)
-  PACKAGES:=kmod-pppoa ppp-mod-pppoa linux-atm atm-tools br2684ctl \
-	    kmod-sangam-atm-annex-a
-endef
-
-define Profile/Annex-A/Description
-	Package set compatible with Annex-A DSL lines (most countries).
-endef
-$(eval $(call Profile,Annex-A))
-
diff --git a/target/linux/ar7/generic/profiles/110-Annex-B.mk b/target/linux/ar7/generic/profiles/110-Annex-B.mk
deleted file mode 100644
index 55de1fc4ad..0000000000
--- a/target/linux/ar7/generic/profiles/110-Annex-B.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Annex-B
-  NAME:=Annex-B DSL firmware
-  PACKAGES:=kmod-pppoa ppp-mod-pppoa linux-atm atm-tools br2684ctl \
-	    kmod-sangam-atm-annex-b
-endef
-
-define Profile/Annex-B/Description
-	Package set compatible with Annex-B DSL lines (Germany).
-endef
-$(eval $(call Profile,Annex-B))
-
diff --git a/target/linux/ar7/generic/profiles/200-Texas.mk b/target/linux/ar7/generic/profiles/200-Texas.mk
deleted file mode 100644
index 7d868bdb08..0000000000
--- a/target/linux/ar7/generic/profiles/200-Texas.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2006-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Texas
-  NAME:=Texas Instruments WiFi (mac80211)
-  PACKAGES:=kmod-acx-mac80211
-endef
-
-define Profile/Texas/Description
-	Package set compatible with hardware using Texas Instruments WiFi cards
-	using the mac80211 driver.
-endef
-$(eval $(call Profile,Texas))
-
diff --git a/target/linux/ar7/generic/profiles/210-None.mk b/target/linux/ar7/generic/profiles/210-None.mk
deleted file mode 100644
index 2fcfacde9f..0000000000
--- a/target/linux/ar7/generic/profiles/210-None.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/None
-  NAME:=No WiFi
-  PACKAGES:=
-endef
-
-define Profile/None/Description
-	Package set without WiFi support
-endef
-$(eval $(call Profile,None))
-
diff --git a/target/linux/ar7/generic/target.mk b/target/linux/ar7/generic/target.mk
deleted file mode 100644
index b40d2a4722..0000000000
--- a/target/linux/ar7/generic/target.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-
-SUBTARGET:=generic
-BOARDNAME:=Texas Instruments AR7 boards
-
-DEFAULT_PACKAGES+= kmod-mac80211 kmod-acx-mac80211 wpad-basic
-
-define Target/Description
-	Build firmware images for TI AR7 based routers.
-endef
diff --git a/target/linux/ar7/image/Makefile b/target/linux/ar7/image/Makefile
deleted file mode 100644
index d20de27113..0000000000
--- a/target/linux/ar7/image/Makefile
+++ /dev/null
@@ -1,137 +0,0 @@
-#
-# Copyright (C) 2006-2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-DROP_SECTIONS:=.reginfo .mdebug .comment .note .pdr .options .MIPS.options
-OBJCOPY_SREC:=$(TARGET_CROSS)objcopy -S -O srec $(addprefix --remove-section=,$(DROP_SECTIONS))
-
-LOADADDR:=0x94600000
-KERNEL_ENTRY:=0x94100000
-RAMSTART:=0x94000000
-RAMSIZE:=0x00100000
-
-EVA_LOADADDR := 0x94100000
-
-LOADER_MAKEOPTS= \
-	KDIR=$(KDIR) \
-	LOADADDR=$(LOADADDR) \
-	KERNEL_ENTRY=$(KERNEL_ENTRY) \
-	RAMSTART=$(RAMSTART) \
-	RAMSIZE=$(RAMSIZE)
-
-CFLAGS := -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
-	-fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
-	-pipe -mlong-calls -fno-common \
-	-mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap \
-	-DLOADADDR=$(LOADADDR)
-
-define Build/Clean
-	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
-endef
-
-define Image/Prepare
-	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
-	$(STAGING_DIR_HOST)/bin/lzma2eva $(EVA_LOADADDR) 0x$${shell $(TARGET_CROSS)nm $(KDIR)/vmlinux | grep -w kernel_entry | cut -d' ' -f1} $(KDIR)/vmlinux.lzma $(KDIR)/loader.eva
-
-	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader \
-		$(LOADER_MAKEOPTS) \
-		clean compile
-	$(OBJCOPY_SREC) $(KDIR)/loader.elf $(KDIR)/loader.srec
-	$(OBJCOPY_SREC) $(KDIR)/vmlinux.elf $(KDIR)/vmlinux.srec
-	srec2bin $(KDIR)/loader.srec $(KDIR)/loader.bin
-	srec2bin $(KDIR)/vmlinux.srec $(KDIR)/vmlinux.bin
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
-	$(OBJCOPY_SREC) $(KDIR)/vmlinux-initramfs.elf \
-		$(KDIR)/vmlinux-initramfs.srec
-	srec2bin $(KDIR)/vmlinux-initramfs.srec $(KDIR)/vmlinux-initramfs.bin
-endif
-endef
-
-define align/jffs2-64k
-bs=65536 conv=sync
-endef
-
-define align/jffs2-128k
-bs=131072 conv=sync
-endef
-
-define align/squashfs
-endef
-
-define Image/Build/CyberTAN
-	(dd if=/dev/zero bs=16 count=1; cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).bin) | \
-		$(STAGING_DIR_HOST)/bin/addpattern -p $(3) -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(4)-code.bin
-endef
-
-define Image/Build/Titan
-	$(STAGING_DIR_HOST)/bin/mktitanimg -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(4)-code.bin -i $(KDIR)/loader.bin $(KDIR)/root.$(1) -a 0x10000 0x10000 -h 2  -p 0x4C575943 -s 0x0b010000
-	$(STAGING_DIR_HOST)/bin/mktitanimg -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-na-$(4)-code.bin -i $(KDIR)/loader.bin $(KDIR)/root.$(1) -a 0x10000 0x10000 -h 2  -p 0x4D575943 -s 0x0b010000
-endef
-
-define Image/Build/AudioCodes
-	( dd if=$(KDIR)/vmlinux.elf bs=64k conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).bin
-endef
-
-#define Image/Build/sErCoMm
-#	cat sercomm/adam2.bin "$(BIN_DIR)/$(IMG_PREFIX)-$(1).bin" > "$(KDIR)/dgfw.tmp"
-#	dd if=sercomm/$(2) of="$(KDIR)/dgfw.tmp" bs=$$$$((0x3e0000 - 80)) seek=1 conv=notrunc
-#	$(STAGING_DIR_HOST)/bin/dgfirmware -f -w "$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(3).img" "$(KDIR)/dgfw.tmp"
-#	rm -f "$(KDIR)/dgfw.tmp"
-#endef
-
-define Image/Build/EVA
-	dd if=$(KDIR)/loader.eva $(call align/$(1)) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(KERNEL)-$(1).bin
-	cat $(KDIR)/root.$(1) >> $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(KERNEL)-$(1).bin
-	$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(KERNEL)-$(1).bin)
-endef
-
-define Image/Build/Initramfs
-	$(CP) $(KDIR)/vmlinux-initramfs.bin $(BIN_DIR)/$(IMG_PREFIX)-initramfs.bin
-endef
-
-ifeq ($(CONFIG_AR7_TI),y)
-define Image/Build
-	dd if=$(KDIR)/loader.bin $(call align/$(1)) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).bin
-	cat $(KDIR)/root.$(1) >> $(BIN_DIR)/$(IMG_PREFIX)-$(1).bin
-	$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(1).bin)
-	$(call Image/Build/CyberTAN,$(1),AG1B,AG1B,$(1))
-	$(call Image/Build/CyberTAN,$(1),AG1A,AG1A,$(1))
-	$(call Image/Build/CyberTAN,$(1),WA21,WA21,$(1))
-	$(call Image/Build/CyberTAN,$(1),WA22,WA22,$(1))
-	$(call Image/Build/CyberTAN,$(1),WAG2,WAG2,$(1))
-	$(call Image/Build/CyberTAN,$(1),AG310,AV2A -b -r 1.0,$(1))
-	$(call Image/Build/CyberTAN,$(1),AG241v2,AG3A -b -r 2.0,$(1))
-	$(call Image/Build/CyberTAN,$(1),AG241v2b,AG3B -b -r 2.0,$(1))
-	$(call Image/Build/CyberTAN,$(1),AG241v1,AG3A -b,$(1))
-	$(call Image/Build/CyberTAN,$(1),WAG54GP2v1,ATWL -b,$(1))
-	$(call Image/Build/CyberTAN,$(1),WAG54GP2v2,CTWL -b,$(1))
-	$(call Image/Build/CyberTAN,$(1),WA31,WA31 -b,$(1))
-	$(call Image/Build/CyberTAN,$(1),WA32,WA32 -b,$(1))
-	$(call Image/Build/CyberTAN,$(1),WA7A,WA7A -b,$(1))
-	$(call Image/Build/CyberTAN,$(1),WA7B,WA7B -b,$(1))
-#	$(call Image/Build/sErCoMm,$(1),dg834,$(1))
-#	$(call Image/Build/sErCoMm,$(1),jdr454wb,$(1))
-	$(call Image/Build/EVA,$(1),EVA)
-	$(call Image/Build/Titan,$(1),Titan,Titan,$(1))
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-	$(call Image/Build/Initramfs)
-endif
-endef
-endif
-
-ifeq ($(CONFIG_AR7_AC49X),y)
-define Image/Build
-#	$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(1).bin)
-	$(call Image/Build/AudioCodes,$(1),mp202,$(1))
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-	$(call Image/Build/Initramfs)
-endif
-endef
-endif
-
-$(eval $(call BuildImage))
diff --git a/target/linux/ar7/patches-4.9/100-fix-highmem-offset.patch b/target/linux/ar7/patches-4.9/100-fix-highmem-offset.patch
deleted file mode 100644
index f1a7549786..0000000000
--- a/target/linux/ar7/patches-4.9/100-fix-highmem-offset.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/include/asm/mach-ar7/spaces.h
-+++ b/arch/mips/include/asm/mach-ar7/spaces.h
-@@ -20,6 +20,8 @@
- #define UNCAC_BASE	_AC(0xb4000000, UL)	/* 0xa0000000 + PHYS_OFFSET */
- #define IO_BASE		UNCAC_BASE
- 
-+#define HIGHMEM_START	_AC(0x20000000, UL)
-+
- #include <asm/mach-generic/spaces.h>
- 
- #endif /* __ASM_AR7_SPACES_H */
diff --git a/target/linux/ar7/patches-4.9/101-MIPS-AR7-allow-NULL-clock-for-clk_get_rate.patch b/target/linux/ar7/patches-4.9/101-MIPS-AR7-allow-NULL-clock-for-clk_get_rate.patch
deleted file mode 100644
index 74ac0d1482..0000000000
--- a/target/linux/ar7/patches-4.9/101-MIPS-AR7-allow-NULL-clock-for-clk_get_rate.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From patchwork Tue Jul 18 10:17:26 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [5/9] MIPS: AR7: allow NULL clock for clk_get_rate
-X-Patchwork-Submitter: Jonas Gorski <jonas.gorski@gmail.com>
-X-Patchwork-Id: 16775
-Message-Id: <20170718101730.2541-6-jonas.gorski@gmail.com>
-To: unlisted-recipients:; (no To-header on input)
-Cc: Ralf Baechle <ralf@linux-mips.org>,
- Paul Gortmaker <paul.gortmaker@windriver.com>,
- James Hogan <james.hogan@imgtec.com>,
- linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
-Date: Tue, 18 Jul 2017 12:17:26 +0200
-From: Jonas Gorski <jonas.gorski@gmail.com>
-List-Id: linux-mips <linux-mips.eddie.linux-mips.org>
-
-Make the behaviour of clk_get_rate consistent with common clk's
-clk_get_rate by accepting NULL clocks as parameter. Some device
-drivers rely on this, and will cause an OOPS otherwise.
-
-Fixes: 780019ddf02f ("MIPS: AR7: Implement clock API")
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
-Cc: James Hogan <james.hogan@imgtec.com>
-Cc: linux-mips@linux-mips.org
-Cc: linux-kernel@vger.kernel.org
-Reported-by: Mathias Kresin <dev@kresin.me>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/ar7/clock.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/ar7/clock.c
-+++ b/arch/mips/ar7/clock.c
-@@ -430,6 +430,9 @@ EXPORT_SYMBOL(clk_disable);
- 
- unsigned long clk_get_rate(struct clk *clk)
- {
-+	if (!clk)
-+		return 0;
-+
- 	return clk->rate;
- }
- EXPORT_SYMBOL(clk_get_rate);
diff --git a/target/linux/ar7/patches-4.9/110-flash.patch b/target/linux/ar7/patches-4.9/110-flash.patch
deleted file mode 100644
index f5713bd033..0000000000
--- a/target/linux/ar7/patches-4.9/110-flash.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,7 +12,7 @@ obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
--obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
-+obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o titanpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -198,7 +198,7 @@ static struct resource physmap_flash_res
- 	.name	= "mem",
- 	.flags	= IORESOURCE_MEM,
- 	.start	= 0x10000000,
--	.end	= 0x107fffff,
-+	.end	= 0x11ffffff,
- };
- 
- static const char *ar7_probe_types[] = { "ar7part", NULL };
diff --git a/target/linux/ar7/patches-4.9/160-vlynq_try_remote_first.patch b/target/linux/ar7/patches-4.9/160-vlynq_try_remote_first.patch
deleted file mode 100644
index 1d1310d82e..0000000000
--- a/target/linux/ar7/patches-4.9/160-vlynq_try_remote_first.patch
+++ /dev/null
@@ -1,300 +0,0 @@
---- a/drivers/vlynq/vlynq.c
-+++ b/drivers/vlynq/vlynq.c
-@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev
- 	return 0;
- }
- 
-+static volatile int vlynq_delay_value_new = 0;
-+
-+static void vlynq_delay_wait(u32 count)
-+{
-+	/* Code adopted from original vlynq driver */
-+	int i = 0;
-+	volatile int *ptr = &vlynq_delay_value_new;
-+	*ptr = 0;
-+
-+	/* We are assuming that the each cycle takes about
-+	 * 23 assembly instructions. */
-+	for(i = 0; i < (count + 23)/23; i++)
-+		*ptr = *ptr + 1;
-+}
-+
- static void vlynq_reset(struct vlynq_device *dev)
- {
-+	u32 rtm = readl(&dev->local->revision);
-+
-+	rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ?
-+			0 : 0x600000;
-+
- 	writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
- 			&dev->local->control);
- 
- 	/* Wait for the devices to finish resetting */
--	msleep(5);
-+	vlynq_delay_wait(0xffffff);
- 
- 	/* Remove reset bit */
--	writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
-+	writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm,
- 			&dev->local->control);
- 
- 	/* Give some time for the devices to settle */
--	msleep(5);
-+	vlynq_delay_wait(0xffffff);
- }
- 
- static void vlynq_irq_unmask(struct irq_data *d)
-@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn
- }
- EXPORT_SYMBOL(vlynq_unregister_driver);
- 
-+enum vlynq_clk_src {
-+	vlynq_clk_external,
-+	vlynq_clk_local,
-+	vlynq_clk_remote,
-+	vlynq_clk_invalid,
-+};
-+
-+static int __vlynq_set_clocks(struct vlynq_device *dev,
-+				enum vlynq_clk_src clk_dir,
-+				int lclk_div, int rclk_div)
-+{
-+	u32 reg;
-+
-+	if (clk_dir == vlynq_clk_invalid) {
-+		printk(KERN_ERR "%s: attempt to set invalid clocking\n",
-+				dev_name(&dev->dev));
-+		return -EINVAL;
-+	}
-+
-+	reg = readl(&dev->local->control);
-+	if (readl(&dev->local->revision) < 0x00010205) {
-+		if (clk_dir & vlynq_clk_local)
-+			reg |= VLYNQ_CTRL_CLOCK_INT;
-+		else
-+			reg &= ~VLYNQ_CTRL_CLOCK_INT;
-+	}
-+	reg &= ~VLYNQ_CTRL_CLOCK_MASK;
-+	reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div);
-+	writel(reg, &dev->local->control);
-+
-+	if (!vlynq_linked(dev))
-+		return -ENODEV;
-+
-+	printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n",
-+			dev_name(&dev->dev), readl(&dev->local->revision));
-+	printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n",
-+			dev_name(&dev->dev), readl(&dev->remote->revision));
-+
-+	reg = readl(&dev->remote->control);
-+	if (readl(&dev->remote->revision) < 0x00010205) {
-+		if (clk_dir & vlynq_clk_remote)
-+			reg |= VLYNQ_CTRL_CLOCK_INT;
-+		else
-+			reg &= ~VLYNQ_CTRL_CLOCK_INT;
-+	}
-+	reg &= ~VLYNQ_CTRL_CLOCK_MASK;
-+	reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div);
-+	writel(reg, &dev->remote->control);
-+
-+	if (!vlynq_linked(dev))
-+		return -ENODEV;
-+
-+	return 0;
-+}
-+
- /*
-  * A VLYNQ remote device can clock the VLYNQ bus master
-  * using a dedicated clock line. In that case, both the
-@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly
- 	int i;
- 
- 	vlynq_reset(dev);
--	for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
--			i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
--		dev->dev_id ? i++ : i--) {
-+	for (i = 0; i <= 7; i++) {
- 
- 		if (!vlynq_linked(dev))
- 			break;
- 
--		writel((readl(&dev->remote->control) &
--				~VLYNQ_CTRL_CLOCK_MASK) |
--				VLYNQ_CTRL_CLOCK_INT |
--				VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
--				&dev->remote->control);
--		writel((readl(&dev->local->control)
--				& ~(VLYNQ_CTRL_CLOCK_INT |
--				VLYNQ_CTRL_CLOCK_MASK)) |
--				VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
--				&dev->local->control);
--
--		if (vlynq_linked(dev)) {
--			printk(KERN_DEBUG
--				"%s: using remote clock divisor %d\n",
--				dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
--			dev->divisor = i;
-+		if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) {
-+			printk(KERN_INFO
-+					"%s: using remote clock divisor %d\n",
-+					dev_name(&dev->dev), i + 1);
-+			dev->divisor = i + vlynq_rdiv1;
- 			return 0;
- 		} else {
- 			vlynq_reset(dev);
-@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly
-  */
- static int __vlynq_try_local(struct vlynq_device *dev)
- {
--	int i;
-+	int i, dir = !dev->dev_id;
- 
- 	vlynq_reset(dev);
- 
--	for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
--			i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
--		dev->dev_id ? i++ : i--) {
--
--		writel((readl(&dev->local->control) &
--				~VLYNQ_CTRL_CLOCK_MASK) |
--				VLYNQ_CTRL_CLOCK_INT |
--				VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
--				&dev->local->control);
--
--		if (vlynq_linked(dev)) {
--			printk(KERN_DEBUG
--				"%s: using local clock divisor %d\n",
--				dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
--			dev->divisor = i;
-+	for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) {
-+
-+		if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) {
-+			printk(KERN_INFO
-+					"%s: using local clock divisor %d\n",
-+					dev_name(&dev->dev), i + 1);
-+			dev->divisor = i + vlynq_ldiv1;
- 			return 0;
- 		} else {
- 			vlynq_reset(dev);
-@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v
- 	if (!vlynq_linked(dev))
- 		return -ENODEV;
- 
--	writel((readl(&dev->remote->control) &
--			~VLYNQ_CTRL_CLOCK_INT),
--			&dev->remote->control);
--
--	writel((readl(&dev->local->control) &
--			~VLYNQ_CTRL_CLOCK_INT),
--			&dev->local->control);
--
--	if (vlynq_linked(dev)) {
--		printk(KERN_DEBUG "%s: using external clock\n",
--			dev_name(&dev->dev));
--			dev->divisor = vlynq_div_external;
-+	if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) {
-+		printk(KERN_INFO "%s: using external clock\n",
-+				dev_name(&dev->dev));
-+				dev->divisor = vlynq_div_external;
- 		return 0;
- 	}
- 
-@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct
- 		return result;
- 
- 	switch (dev->divisor) {
--	case vlynq_div_external:
- 	case vlynq_div_auto:
- 		/* When the device is brought from reset it should have clock
- 		 * generation negotiated by hardware.
- 		 * Check which device is generating clocks and perform setup
- 		 * accordingly */
--		if (vlynq_linked(dev) && readl(&dev->remote->control) &
--		   VLYNQ_CTRL_CLOCK_INT) {
--			if (!__vlynq_try_remote(dev) ||
--				!__vlynq_try_local(dev)  ||
--				!__vlynq_try_external(dev))
--				return 0;
--		} else {
--			if (!__vlynq_try_external(dev) ||
--				!__vlynq_try_local(dev)    ||
--				!__vlynq_try_remote(dev))
--				return 0;
--		}
-+		if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev))
-+			return 0;
-+	case vlynq_div_external:
-+		if (!__vlynq_try_external(dev))
-+			return 0;
- 		break;
- 	case vlynq_ldiv1:
- 	case vlynq_ldiv2:
-@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct
- 	case vlynq_ldiv6:
- 	case vlynq_ldiv7:
- 	case vlynq_ldiv8:
--		writel(VLYNQ_CTRL_CLOCK_INT |
--			VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
--			vlynq_ldiv1), &dev->local->control);
--		writel(0, &dev->remote->control);
--		if (vlynq_linked(dev)) {
--			printk(KERN_DEBUG
--				"%s: using local clock divisor %d\n",
--				dev_name(&dev->dev),
--				dev->divisor - vlynq_ldiv1 + 1);
-+		if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor -
-+				vlynq_ldiv1, 0)) {
-+			printk(KERN_INFO
-+					"%s: using local clock divisor %d\n",
-+					dev_name(&dev->dev),
-+					dev->divisor - vlynq_ldiv1 + 1);
- 			return 0;
- 		}
- 		break;
-@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct
- 	case vlynq_rdiv6:
- 	case vlynq_rdiv7:
- 	case vlynq_rdiv8:
--		writel(0, &dev->local->control);
--		writel(VLYNQ_CTRL_CLOCK_INT |
--			VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
--			vlynq_rdiv1), &dev->remote->control);
--		if (vlynq_linked(dev)) {
--			printk(KERN_DEBUG
--				"%s: using remote clock divisor %d\n",
--				dev_name(&dev->dev),
--				dev->divisor - vlynq_rdiv1 + 1);
-+		if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0,
-+				dev->divisor - vlynq_rdiv1)) {
-+			printk(KERN_INFO
-+					"%s: using remote clock divisor %d\n",
-+					dev_name(&dev->dev),
-+					dev->divisor - vlynq_rdiv1 + 1);
- 			return 0;
- 		}
- 		break;
- 	}
--
-+	vlynq_reset(dev);
- 	ops->off(dev);
- 	return -ENODEV;
- }
-@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d
- 	platform_set_drvdata(pdev, dev);
- 
- 	printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
--	       dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
--	       (void *)dev->mem_start);
-+			dev_name(&dev->dev), (void *)dev->regs_start,
-+			dev->irq, (void *)dev->mem_start);
- 
- 	dev->dev_id = 0;
- 	dev->divisor = vlynq_div_auto;
--	result = __vlynq_enable_device(dev);
--	if (result == 0) {
-+	if (!__vlynq_enable_device(dev)) {
- 		dev->dev_id = readl(&dev->remote->chip);
-+		vlynq_reset(dev);
- 		((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
- 	}
- 	if (dev->dev_id)
diff --git a/target/linux/ar7/patches-4.9/200-free-mem-below-kernel-offset.patch b/target/linux/ar7/patches-4.9/200-free-mem-below-kernel-offset.patch
deleted file mode 100644
index 4011942d79..0000000000
--- a/target/linux/ar7/patches-4.9/200-free-mem-below-kernel-offset.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/mips/ar7/memory.c
-+++ b/arch/mips/ar7/memory.c
-@@ -66,5 +66,11 @@ void __init prom_meminit(void)
- 
- void __init prom_free_prom_memory(void)
- {
--	/* Nothing to free */
-+	/* adapted from arch/mips/txx9/generic/setup.c */
-+	unsigned long saddr = PHYS_OFFSET + PAGE_SIZE;
-+	unsigned long eaddr = __pa_symbol(&_text);
-+
-+	/* free memory between prom-record and kernel _text base */
-+	if (saddr < eaddr)
-+		free_init_pages("prom memory", saddr, eaddr);
- }
diff --git a/target/linux/ar7/patches-4.9/300-add-ac49x-platform.patch b/target/linux/ar7/patches-4.9/300-add-ac49x-platform.patch
deleted file mode 100644
index 583f6bccaf..0000000000
--- a/target/linux/ar7/patches-4.9/300-add-ac49x-platform.patch
+++ /dev/null
@@ -1,85 +0,0 @@
---- a/arch/mips/ar7/Platform
-+++ b/arch/mips/ar7/Platform
-@@ -3,4 +3,9 @@
- #
- platform-$(CONFIG_AR7)		+= ar7/
- cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
--load-$(CONFIG_AR7)		+= 0xffffffff94100000
-+load-$(CONFIG_AR7_TI)		+= 0xffffffff94100000
-+
-+#
-+# AudioCodes AC49x
-+#
-+load-$(CONFIG_AR7_AC49X)	+= 0xffffffff945ca000
---- a/arch/mips/ar7/setup.c
-+++ b/arch/mips/ar7/setup.c
-@@ -68,6 +68,10 @@ const char *get_system_type(void)
- 			return "TI AR7 (TNETV1056)";
- 		case TITAN_CHIP_1060:
- 			return "TI AR7 (TNETV1060)";
-+		case TITAN_CHIP_AC495:
-+			return "AudioCodes AC495";
-+		case TITAN_CHIP_AC496:
-+			return "AudioCodes AC496";
- 		}
- 	default:
- 		return "TI AR7 (unknown)";
---- a/arch/mips/include/asm/mach-ar7/ar7.h
-+++ b/arch/mips/include/asm/mach-ar7/ar7.h
-@@ -92,6 +92,8 @@
- #define TITAN_CHIP_1055 0x0e
- #define TITAN_CHIP_1056 0x0d
- #define TITAN_CHIP_1060 0x07
-+#define TITAN_CHIP_AC495	0x00
-+#define TITAN_CHIP_AC496	0x02
- 
- /* Interrupts */
- #define AR7_IRQ_UART0	15
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -161,7 +161,7 @@ config AR7
- 	select HAVE_CLK
- 	help
- 	  Support for the Texas Instruments AR7 System-on-a-Chip
--	  family: TNETD7100, 7200 and 7300.
-+	  family: TI TNETD7100, 7200, 7300 and AudioCodes AC49x.
- 
- config ATH25
- 	bool "Atheros AR231x/AR531x SoC support"
-@@ -1008,6 +1008,7 @@ config MIPS_PARAVIRT
- endchoice
- 
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar7/Kconfig"
- source "arch/mips/ath25/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- /dev/null
-+++ b/arch/mips/ar7/Kconfig
-@@ -0,0 +1,26 @@
-+if AR7
-+
-+config AR7_TI
-+	bool
-+
-+config AR7_AC49X
-+	bool
-+
-+choice
-+	prompt "AR7 SoC family selection"
-+	default AR7_TYPE_TI
-+	depends on AR7
-+	help
-+	  Select AR7 MIPS SoC implementation.
-+
-+	config AR7_TYPE_TI
-+		bool "Texas Instruments AR7"
-+		select AR7_TI
-+
-+	config AR7_TYPE_AC49X
-+		bool "AudioCodes AC49X"
-+		select AR7_AC49X
-+
-+endchoice
-+
-+endif
diff --git a/target/linux/ar7/patches-4.9/310-ac49x-prom-support.patch b/target/linux/ar7/patches-4.9/310-ac49x-prom-support.patch
deleted file mode 100644
index dddf22106a..0000000000
--- a/target/linux/ar7/patches-4.9/310-ac49x-prom-support.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/ar7/prom.c
-+++ b/arch/mips/ar7/prom.c
-@@ -70,6 +70,7 @@ struct psbl_rec {
- };
- 
- static const char psp_env_version[] __initconst = "TIENV0.8";
-+static const char psp_env_version_ac49x[] __initconst = "MaxENV0.2";
- 
- struct psp_env_chunk {
- 	u8	num;
-@@ -186,7 +187,8 @@ static void __init ar7_init_env(struct e
- 	struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
- 	void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
- 
--	if (strcmp(psp_env, psp_env_version) == 0) {
-+	if (strcmp(psp_env, psp_env_version) == 0 ||
-+	    strcmp(psp_env, psp_env_version_ac49x) == 0) {
- 		parse_psp_env(psp_env);
- 	} else {
- 		for (i = 0; i < MAX_ENTRY; i++, env++)
diff --git a/target/linux/ar7/patches-4.9/320-ac49x-mtd-partitions.patch b/target/linux/ar7/patches-4.9/320-ac49x-mtd-partitions.patch
deleted file mode 100644
index fafa8c77eb..0000000000
--- a/target/linux/ar7/patches-4.9/320-ac49x-mtd-partitions.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -154,6 +154,11 @@ config MTD_OF_PARTS
- 	  the partition map from the children of the flash node,
- 	  as described in Documentation/devicetree/bindings/mtd/partition.txt.
- 
-+config MTD_AC49X_PARTS
-+	tristate "AudioCodes AC49X partitioning support"
-+	---help---
-+	  AudioCodes AC49X partitioning support
-+
- config MTD_AR7_PARTS
- 	tristate "TI AR7 partitioning support"
- 	---help---
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_SPLIT)		+= mtdsplit/
- obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
-+obj-$(CONFIG_MTD_AC49X_PARTS)	+= ac49xpart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o titanpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -201,7 +201,7 @@ static struct resource physmap_flash_res
- 	.end	= 0x11ffffff,
- };
- 
--static const char *ar7_probe_types[] = { "ar7part", NULL };
-+static const char *ar7_probe_types[] = { "ac49xpart", "ar7part", NULL };
- 
- static struct physmap_flash_data physmap_flash_data = {
- 	.width	= 2,
diff --git a/target/linux/ar7/patches-4.9/920-ar7part.patch b/target/linux/ar7/patches-4.9/920-ar7part.patch
deleted file mode 100644
index e520af2083..0000000000
--- a/target/linux/ar7/patches-4.9/920-ar7part.patch
+++ /dev/null
@@ -1,120 +0,0 @@
---- a/drivers/mtd/ar7part.c
-+++ b/drivers/mtd/ar7part.c
-@@ -30,11 +30,14 @@
- 
- #include <uapi/linux/magic.h>
- 
-+#include <asm/mach-ar7/prom.h>
-+
- #define AR7_PARTS	4
- #define ROOT_OFFSET	0xe0000
- 
- #define LOADER_MAGIC1	le32_to_cpu(0xfeedfa42)
- #define LOADER_MAGIC2	le32_to_cpu(0xfeed1281)
-+#define LOADER_MAGIC3	le32_to_cpu(0x434d4d4c)
- 
- struct ar7_bin_rec {
- 	unsigned int checksum;
-@@ -42,12 +45,16 @@ struct ar7_bin_rec {
- 	unsigned int address;
- };
- 
-+int create_titan_partitions(struct mtd_info *master,
-+        const struct mtd_partition **pparts,
-+        struct mtd_part_parser_data *data);
-+
- static int create_mtd_partitions(struct mtd_info *master,
- 				 const struct mtd_partition **pparts,
- 				 struct mtd_part_parser_data *data)
- {
- 	struct ar7_bin_rec header;
--	unsigned int offset;
-+	unsigned int offset, mtd_start, mtd_end;
- 	size_t len;
- 	unsigned int pre_size = master->erasesize, post_size = 0;
- 	unsigned int root_offset = ROOT_OFFSET;
-@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct
- 	int retries = 10;
- 	struct mtd_partition *ar7_parts;
- 
-+	const char *prom_str = prom_getenv("ProductID");
-+	char mtd_name[] = "mtd1";
-+	if(prom_str &&
-+		(strcmp(prom_str, "CYWL")==0 ||
-+		strcmp(prom_str, "CYWM")==0 ||
-+		strcmp(prom_str, "CYLM")==0 ||
-+		strcmp(prom_str, "CYLL")==0)){
-+		return create_titan_partitions(master, pparts, data);
-+	}
-+
- 	ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
- 	if (!ar7_parts)
- 		return -ENOMEM;
-@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct
- 
- 	pre_size = offset;
- 
--	if (!ar7_parts[1].offset) {
--		ar7_parts[1].offset = master->size - master->erasesize;
--		post_size = master->erasesize;
--	}
--
- 	switch (header.checksum) {
--	case LOADER_MAGIC1:
--		while (header.length) {
--			offset += sizeof(header) + header.length;
--			mtd_read(master, offset, sizeof(header), &len,
--				 (uint8_t *)&header);
--		}
--		root_offset = offset + sizeof(header) + 4;
--		break;
- 	case LOADER_MAGIC2:
-+		for (retries = 0; retries <= 9; retries++) {
-+			mtd_name[3] = '0' + retries;
-+			prom_str = prom_getenv(mtd_name);
-+			if (prom_str == NULL)
-+				continue;
-+			sscanf(prom_str, "%i,%i", &mtd_start, &mtd_end);
-+			if (pre_size == (mtd_start & 0x1ffffff)) {
-+				ar7_parts[1].offset = mtd_end &= 0x1ffffff;
-+				ar7_parts[1].size = post_size = master->size - mtd_end;
-+				break;
-+			}
-+		}
-+	case LOADER_MAGIC1:
-+		root_offset = (header.checksum == LOADER_MAGIC1) ? 4 : 0;
- 		while (header.length) {
- 			offset += sizeof(header) + header.length;
- 			mtd_read(master, offset, sizeof(header), &len,
- 				 (uint8_t *)&header);
- 		}
--		root_offset = offset + sizeof(header) + 4 + 0xff;
--		root_offset &= ~(uint32_t)0xff;
-+		root_offset += offset + sizeof(header);
- 		break;
- 	default:
- 		printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum);
- 		break;
- 	}
- 
-+	if (!ar7_parts[1].offset) {
-+		post_size = master->erasesize;
-+		ar7_parts[1].offset = master->size - post_size;
-+	}
-+
- 	mtd_read(master, root_offset, sizeof(header), &len, (u8 *)&header);
- 	if (header.checksum != SQUASHFS_MAGIC) {
- 		root_offset += master->erasesize - 1;
---- a/drivers/mtd/titanpart.c
-+++ b/drivers/mtd/titanpart.c
-@@ -148,8 +148,8 @@ static void titan_add_partition(char * e
- 
- }
- int create_titan_partitions(struct mtd_info *master,
--	struct mtd_partition **pparts,
--	unsigned long origin)
-+	const struct mtd_partition **pparts,
-+	struct mtd_part_parser_data *data)
- {
- 	struct nsp_img_hdr_head		hdr;
- 	struct nsp_img_hdr_section_info	sect_info;
diff --git a/target/linux/ar7/patches-4.9/925-actiontec_leds.patch b/target/linux/ar7/patches-4.9/925-actiontec_leds.patch
deleted file mode 100644
index 804dbf5c3c..0000000000
--- a/target/linux/ar7/patches-4.9/925-actiontec_leds.patch
+++ /dev/null
@@ -1,95 +0,0 @@
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -460,31 +460,22 @@ static struct gpio_led fb_fon_leds[] = {
- 	},
- };
- 
--static struct gpio_led gt701_leds[] = {
-+static struct gpio_led actiontec_leds[] = {
- 	{
- 		.name			= "inet:green",
- 		.gpio			= 13,
--		.active_low		= 1,
--	},
--	{
--		.name			= "usb",
--		.gpio			= 12,
--		.active_low		= 1,
- 	},
- 	{
- 		.name			= "inet:red",
- 		.gpio			= 9,
--		.active_low		= 1,
- 	},
- 	{
--		.name			= "power:red",
-+		.name			= "power:green",
- 		.gpio			= 7,
--		.active_low		= 1,
- 	},
- 	{
--		.name			= "power:green",
-+		.name			= "power:red",
- 		.gpio			= 8,
--		.active_low		= 1,
- 		.default_trigger	= "default-on",
- 	},
- 	{
-@@ -492,6 +483,44 @@ static struct gpio_led gt701_leds[] = {
- 		.gpio			= 10,
- 		.active_low		= 1,
- 	},
-+	{
-+		.name			= "wifi",
-+		.gpio			= 6,
-+		.active_low		= 1,
-+	},
-+	{
-+		.name			= "wifi:red",
-+		.gpio			= 3,
-+	},
-+	{
-+		.name			= "standby",
-+		.gpio			= 4,
-+	},
-+	{
-+		.name			= "wps",
-+		.gpio			= 16,
-+		.active_low		= 1,
-+	},
-+	{
-+		.name			= "usb",
-+		.gpio			= 12,
-+		.active_low		= 1,
-+	},
-+	{
-+		.name			= "voip",
-+		.gpio			= 15,
-+		.active_low		= 1,
-+        },
-+        {
-+                .name			= "line1",
-+                .gpio			= 23,
-+                .active_low		= 1,
-+	},
-+	{
-+		.name			= "line2",
-+		.gpio			= 25,
-+		.active_low		= 1,
-+	},
- };
- 
- static struct gpio_led_platform_data ar7_led_data;
-@@ -535,9 +564,9 @@ static void __init detect_leds(void)
- 	} else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
- 		ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
- 		ar7_led_data.leds = titan_leds;
--	} else if (strstr(prid, "GT701")) {
--		ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
--		ar7_led_data.leds = gt701_leds;
-+	} else if (strstr(prid, "GT7") || strstr(prid, "PK5000")) {
-+		ar7_led_data.num_leds = ARRAY_SIZE(actiontec_leds);
-+		ar7_led_data.leds = actiontec_leds;
- 	}
- }
- 
diff --git a/target/linux/ar7/patches-4.9/950-cpmac_titan.patch b/target/linux/ar7/patches-4.9/950-cpmac_titan.patch
deleted file mode 100644
index 158b689c98..0000000000
--- a/target/linux/ar7/patches-4.9/950-cpmac_titan.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/drivers/net/ethernet/ti/cpmac.c
-+++ b/drivers/net/ethernet/ti/cpmac.c
-@@ -1124,6 +1124,8 @@ static int cpmac_probe(struct platform_d
- 		goto fail;
- 	}
- 
-+	ar7_device_reset(pdata->reset_bit);
-+
- 	dev->irq = platform_get_irq_byname(pdev, "irq");
- 
- 	dev->netdev_ops = &cpmac_netdev_ops;
-@@ -1203,7 +1205,7 @@ int cpmac_init(void)
- 	cpmac_mii->write = cpmac_mdio_write;
- 	cpmac_mii->reset = cpmac_mdio_reset;
- 
--	cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
-+	cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
- 
- 	if (!cpmac_mii->priv) {
- 		pr_err("Can't ioremap mdio registers\n");
-@@ -1214,10 +1216,16 @@ int cpmac_init(void)
- 	/* FIXME: unhardcode gpio&reset bits */
- 	ar7_gpio_disable(26);
- 	ar7_gpio_disable(27);
--	ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
--	ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+
-+	if (!ar7_is_titan()) {
-+		ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-+		ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+	}
- 	ar7_device_reset(AR7_RESET_BIT_EPHY);
- 
-+	if (ar7_is_titan())
-+		ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+
- 	cpmac_mii->reset(cpmac_mii);
- 
- 	for (i = 0; i < 300; i++) {
-@@ -1234,7 +1242,11 @@ int cpmac_init(void)
- 		mask = 0;
- 	}
- 
--	cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+	if (ar7_is_titan())
-+		cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000);
-+	else
-+		cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+
- 	snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "cpmac-1");
- 
- 	res = mdiobus_register(cpmac_mii);
diff --git a/target/linux/ar7/src/adam2patcher.c b/target/linux/ar7/src/adam2patcher.c
deleted file mode 100644
index 25a78074a6..0000000000
--- a/target/linux/ar7/src/adam2patcher.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * patcher.c - ADAM2 patcher for Netgear DG834 (and compatible)
- *
- * Copyright (C) 2006 Felix Fietkau
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdint.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <string.h>
-
-#include <sys/ioctl.h>
-
-int main(int argc, char **argv)
-{
-	int fd;
-	char *ptr;
-	uint32_t *i;
-
-	if (argc != 2) {
-		fprintf(stderr, "Usage: %s <filename>\n", argv[0]);
-		exit(1);
-	}
-
-	if (((fd = open(argv[1], O_RDWR)) < 0)
-			|| ((ptr = mmap(0, 128 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))) {
-		fprintf(stderr, "Can't open file\n");
-		exit(1);
-	}
-
-	i = (uint32_t *) &ptr[0x3944];
-	if (*i == 0x0c000944) {
-		fprintf(stderr, "Unpatched ADAM2 detected. Patching... ");
-		*i = 0x00000000;
-		msync(i, sizeof(*i), MS_SYNC|MS_INVALIDATE);
-		fprintf(stderr, "done!\n");
-	} else if (*i == 0x00000000) {
-		fprintf(stderr, "Patched ADAM2 detected.\n");
-	} else {
-		fprintf(stderr, "Unknown ADAM2 detected. Can't patch!\n");
-	}
-
-	close(fd);		
-}
diff --git a/target/linux/ath79/Makefile b/target/linux/ath79/Makefile
index 0ccc0bed1c..82f6317ac6 100644
--- a/target/linux/ath79/Makefile
+++ b/target/linux/ath79/Makefile
@@ -9,7 +9,6 @@ SUBTARGETS:=generic nand tiny
 FEATURES:=ramdisk
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch b/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch
deleted file mode 100644
index 36234d8d83..0000000000
--- a/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 5f5c9858af167f842ee8df053920b98387a71af1 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 5 Mar 2018 11:41:25 +0100
-Subject: [PATCH 02/27] watchdog: ath79: fix maximum timeout
-
-If the userland tries to set a timeout higher than the max_timeout,
-then we should fallback to max_timeout.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/watchdog/ath79_wdt.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/watchdog/ath79_wdt.c
-+++ b/drivers/watchdog/ath79_wdt.c
-@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
- 
- static int ath79_wdt_set_timeout(int val)
- {
--	if (val < 1 || val > max_timeout)
-+	if (val < 1)
- 		return -EINVAL;
- 
--	timeout = val;
-+	if (val > max_timeout)
-+		timeout = max_timeout;
-+	else
-+		timeout = val;
-+
- 	ath79_wdt_keepalive();
- 
- 	return 0;
diff --git a/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch
deleted file mode 100644
index b909d57fce..0000000000
--- a/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:03:03 +0100
-Subject: [PATCH 03/27] leds: add reset-controller based driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/leds/Kconfig      |  11 ++++
- drivers/leds/Makefile     |   1 +
- drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 149 insertions(+)
- create mode 100644 drivers/leds/leds-reset.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -756,6 +756,17 @@ config LEDS_NIC78BX
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called leds-nic78bx.
- 
-+config LEDS_RESET
-+	tristate "LED support for reset-controller API"
-+	depends on LEDS_CLASS
-+	depends on RESET_CONTROLLER
-+	help
-+	  This option enables support for LEDs connected to pins driven by reset
-+	  controllers. Yes, DNI actual built HW like that.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called leds-reset.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
- 
---- /dev/null
-+++ b/drivers/leds/leds-reset.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/err.h>
-+#include <linux/reset.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+struct reset_led_data {
-+	struct led_classdev cdev;
-+	struct reset_control *rst;
-+};
-+
-+static inline struct reset_led_data *
-+			cdev_to_reset_led_data(struct led_classdev *led_cdev)
-+{
-+	return container_of(led_cdev, struct reset_led_data, cdev);
-+}
-+
-+static void reset_led_set(struct led_classdev *led_cdev,
-+	enum led_brightness value)
-+{
-+	struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev);
-+
-+	if (value == LED_OFF)
-+		reset_control_assert(led_dat->rst);
-+	else
-+		reset_control_deassert(led_dat->rst);
-+}
-+
-+struct reset_leds_priv {
-+	int num_leds;
-+	struct reset_led_data leds[];
-+};
-+
-+static inline int sizeof_reset_leds_priv(int num_leds)
-+{
-+	return sizeof(struct reset_leds_priv) +
-+		(sizeof(struct reset_led_data) * num_leds);
-+}
-+
-+static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fwnode_handle *child;
-+	struct reset_leds_priv *priv;
-+	int count, ret;
-+
-+	count = device_get_child_node_count(dev);
-+	if (!count)
-+		return ERR_PTR(-ENODEV);
-+
-+	priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL);
-+	if (!priv)
-+		return ERR_PTR(-ENOMEM);
-+
-+	device_for_each_child_node(dev, child) {
-+		struct reset_led_data *led = &priv->leds[priv->num_leds];
-+		struct device_node *np = to_of_node(child);
-+
-+		ret = fwnode_property_read_string(child, "label", &led->cdev.name);
-+		if (!led->cdev.name) {
-+			fwnode_handle_put(child);
-+			return ERR_PTR(-EINVAL);
-+		}
-+		led->rst = __of_reset_control_get(np, NULL, 0, 0, 0);
-+		if (IS_ERR(led->rst))
-+			return ERR_PTR(-EINVAL);
-+
-+		fwnode_property_read_string(child, "linux,default-trigger",
-+						&led->cdev.default_trigger);
-+
-+		led->cdev.brightness_set = reset_led_set;
-+		ret = devm_of_led_classdev_register(&pdev->dev, np, &led->cdev);
-+		if (ret < 0)
-+			return ERR_PTR(ret);
-+		led->cdev.dev->of_node = np;
-+		priv->num_leds++;
-+	}
-+
-+	return priv;
-+}
-+
-+static const struct of_device_id of_reset_leds_match[] = {
-+	{ .compatible = "reset-leds", },
-+	{},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_reset_leds_match);
-+
-+static int reset_led_probe(struct platform_device *pdev)
-+{
-+	struct reset_leds_priv *priv;
-+
-+	priv = reset_leds_create(pdev);
-+	if (IS_ERR(priv))
-+		return PTR_ERR(priv);
-+
-+	platform_set_drvdata(pdev, priv);
-+
-+	return 0;
-+}
-+
-+static void reset_led_shutdown(struct platform_device *pdev)
-+{
-+	struct reset_leds_priv *priv = platform_get_drvdata(pdev);
-+	int i;
-+
-+	for (i = 0; i < priv->num_leds; i++) {
-+		struct reset_led_data *led = &priv->leds[i];
-+
-+		if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN))
-+			reset_led_set(&led->cdev, LED_OFF);
-+	}
-+}
-+
-+static struct platform_driver reset_led_driver = {
-+	.probe		= reset_led_probe,
-+	.shutdown	= reset_led_shutdown,
-+	.driver		= {
-+		.name	= "leds-reset",
-+		.of_match_table = of_reset_leds_match,
-+	},
-+};
-+
-+module_platform_driver(reset_led_driver);
-+
-+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-+MODULE_DESCRIPTION("reset controller LED driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:leds-reset");
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -78,6 +78,7 @@ obj-$(CONFIG_LEDS_MT6323)		+= leds-mt632
- obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
- obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
- obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
-+obj-$(CONFIG_LEDS_RESET)		+= leds-reset.o
- 
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_CR0014114)		+= leds-cr0014114.o
diff --git a/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch
deleted file mode 100644
index 6280baf913..0000000000
--- a/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch
+++ /dev/null
@@ -1,320 +0,0 @@
-From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:04:05 +0100
-Subject: [PATCH 04/27] phy: add ath79 usb phys
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/phy/Kconfig          |  16 ++++++
- drivers/phy/Makefile         |   2 +
- drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++
- drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++
- 4 files changed, 250 insertions(+)
- create mode 100644 drivers/phy/phy-ar7100-usb.c
- create mode 100644 drivers/phy/phy-ar7200-usb.c
-
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -15,6 +15,22 @@ config GENERIC_PHY
- 	  phy users can obtain reference to the PHY. All the users of this
- 	  framework should select this config.
- 
-+config PHY_AR7100_USB
-+	tristate "Atheros AR7100 USB PHY driver"
-+	depends on ATH79 || COMPILE_TEST
-+	default y if USB_EHCI_HCD_PLATFORM
-+	select PHY_SIMPLE
-+	help
-+	  Enable this to support the USB PHY on Atheros AR7100 SoCs.
-+
-+config PHY_AR7200_USB
-+	tristate "Atheros AR7200 USB PHY driver"
-+	depends on ATH79 || COMPILE_TEST
-+	default y if USB_EHCI_HCD_PLATFORM
-+	select PHY_SIMPLE
-+	help
-+	  Enable this to support the USB PHY on Atheros AR7200 SoCs.
-+
- config PHY_LPC18XX_USB_OTG
- 	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
- 	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -4,6 +4,8 @@
- #
- 
- obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
-+obj-$(CONFIG_PHY_AR7100_USB)		+= phy-ar7100-usb.o
-+obj-$(CONFIG_PHY_AR7200_USB)		+= phy-ar7200-usb.o
- obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
- obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
- obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
---- /dev/null
-+++ b/drivers/phy/phy-ar7100-usb.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/delay.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+struct ar7100_usb_phy {
-+	struct reset_control	*rst_phy;
-+	struct reset_control	*rst_host;
-+	struct reset_control	*rst_ohci_dll;
-+	void __iomem		*io_base;
-+	struct phy		*phy;
-+	int			gpio;
-+};
-+
-+static int ar7100_usb_phy_power_off(struct phy *phy)
-+{
-+	struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	err |= reset_control_assert(priv->rst_host);
-+	err |= reset_control_assert(priv->rst_phy);
-+	err |= reset_control_assert(priv->rst_ohci_dll);
-+
-+	return err;
-+}
-+
-+static int ar7100_usb_phy_power_on(struct phy *phy)
-+{
-+	struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	err |= ar7100_usb_phy_power_off(phy);
-+	mdelay(100);
-+	err |= reset_control_deassert(priv->rst_ohci_dll);
-+	err |= reset_control_deassert(priv->rst_phy);
-+	err |= reset_control_deassert(priv->rst_host);
-+	mdelay(500);
-+	iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG);
-+	iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ);
-+
-+	return err;
-+}
-+
-+static const struct phy_ops ar7100_usb_phy_ops = {
-+	.power_on	= ar7100_usb_phy_power_on,
-+	.power_off	= ar7100_usb_phy_power_off,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int ar7100_usb_phy_probe(struct platform_device *pdev)
-+{
-+	struct phy_provider *phy_provider;
-+	struct resource *res;
-+	struct ar7100_usb_phy *priv;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	priv->io_base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(priv->io_base))
-+		return PTR_ERR(priv->io_base);
-+
-+	priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+	if (IS_ERR(priv->rst_phy)) {
-+		dev_err(&pdev->dev, "phy reset is missing\n");
-+		return PTR_ERR(priv->rst_phy);
-+	}
-+
-+	priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host");
-+	if (IS_ERR(priv->rst_host)) {
-+		dev_err(&pdev->dev, "host reset is missing\n");
-+		return PTR_ERR(priv->rst_host);
-+	}
-+
-+	priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll");
-+	if (IS_ERR(priv->rst_ohci_dll)) {
-+		dev_err(&pdev->dev, "ohci-dll reset is missing\n");
-+		return PTR_ERR(priv->rst_host);
-+	}
-+
-+	priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops);
-+	if (IS_ERR(priv->phy)) {
-+		dev_err(&pdev->dev, "failed to create PHY\n");
-+		return PTR_ERR(priv->phy);
-+	}
-+
-+	priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+	if (priv->gpio >= 0) {
-+		int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+		if (ret) {
-+			dev_err(&pdev->dev, "failed to request gpio\n");
-+			return ret;
-+		}
-+		gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+		gpio_set_value(priv->gpio, 1);
-+	}
-+
-+	phy_set_drvdata(priv->phy, priv);
-+
-+	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+
-+	return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7100_usb_phy_of_match[] = {
-+	{ .compatible = "qca,ar7100-usb-phy" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match);
-+
-+static struct platform_driver ar7100_usb_phy_driver = {
-+	.probe	= ar7100_usb_phy_probe,
-+	.driver = {
-+		.of_match_table	= ar7100_usb_phy_of_match,
-+		.name		= "ar7100-usb-phy",
-+	}
-+};
-+module_platform_driver(ar7100_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/phy/phy-ar7200-usb.c
-@@ -0,0 +1,123 @@
-+/*
-+ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+struct ar7200_usb_phy {
-+	struct reset_control	*rst_phy;
-+	struct reset_control	*suspend_override;
-+	struct phy		*phy;
-+	int			gpio;
-+};
-+
-+static int ar7200_usb_phy_power_on(struct phy *phy)
-+{
-+	struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	if (priv->rst_phy)
-+		err = reset_control_deassert(priv->rst_phy);
-+	if (!err && priv->suspend_override)
-+		err = reset_control_assert(priv->suspend_override);
-+	if (err && priv->rst_phy)
-+		err = reset_control_assert(priv->rst_phy);
-+
-+	return err;
-+}
-+
-+static int ar7200_usb_phy_power_off(struct phy *phy)
-+{
-+	struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+	int err = 0;
-+
-+	if (priv->suspend_override)
-+		err = reset_control_deassert(priv->suspend_override);
-+	if (priv->rst_phy)
-+		err |= reset_control_assert(priv->rst_phy);
-+
-+	return err;
-+}
-+
-+static const struct phy_ops ar7200_usb_phy_ops = {
-+	.power_on	= ar7200_usb_phy_power_on,
-+	.power_off	= ar7200_usb_phy_power_off,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int ar7200_usb_phy_probe(struct platform_device *pdev)
-+{
-+	struct phy_provider *phy_provider;
-+	struct ar7200_usb_phy *priv;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+	if (IS_ERR(priv->rst_phy)) {
-+		dev_err(&pdev->dev, "phy reset is missing\n");
-+		return PTR_ERR(priv->rst_phy);
-+	}
-+
-+	priv->suspend_override = devm_reset_control_get_optional(
-+		&pdev->dev, "usb-suspend-override");
-+	if (IS_ERR(priv->suspend_override)) {
-+		if (PTR_ERR(priv->suspend_override) == -ENOENT)
-+			priv->suspend_override = NULL;
-+		else
-+			return PTR_ERR(priv->suspend_override);
-+	}
-+
-+	priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops);
-+	if (IS_ERR(priv->phy)) {
-+		dev_err(&pdev->dev, "failed to create PHY\n");
-+		return PTR_ERR(priv->phy);
-+	}
-+
-+	priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+	if (priv->gpio >= 0) {
-+		int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+		if (ret) {
-+			dev_err(&pdev->dev, "failed to request gpio\n");
-+			return ret;
-+		}
-+		gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+		gpio_set_value(priv->gpio, 1);
-+	}
-+
-+	phy_set_drvdata(priv->phy, priv);
-+
-+	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+	return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7200_usb_phy_of_match[] = {
-+	{ .compatible = "qca,ar7200-usb-phy" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match);
-+
-+static struct platform_driver ar7200_usb_phy_driver = {
-+	.probe	= ar7200_usb_phy_probe,
-+	.driver = {
-+		.of_match_table	= ar7200_usb_phy_of_match,
-+		.name		= "ar7200-usb-phy",
-+	}
-+};
-+module_platform_driver(ar7200_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch
deleted file mode 100644
index 52d77c805c..0000000000
--- a/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:01:43 +0100
-Subject: [PATCH 05/27] usb: add more OF/quirk properties
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/usb/host/ehci-platform.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -161,6 +161,11 @@ static int ehci_platform_probe(struct pl
- 	ehci = hcd_to_ehci(hcd);
- 
- 	if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
-+		of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset);
-+
-+		if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug"))
-+			pdata->has_synopsys_hc_bug = 1;
-+
- 		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
- 			ehci->big_endian_mmio = 1;
- 
diff --git a/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
deleted file mode 100644
index bd26107af5..0000000000
--- a/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:55:13 +0100
-Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for
- QCA9556 SoCs
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/Makefile         |   1 +
- drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 143 insertions(+)
- create mode 100644 drivers/irqchip/irq-ath79-intc.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_IRQCHIP)			+= irqchip.o
- 
- obj-$(CONFIG_ALPINE_MSI)		+= irq-alpine-msi.o
- obj-$(CONFIG_ATH79)			+= irq-ath79-cpu.o
-+obj-$(CONFIG_ATH79)			+= irq-ath79-intc.o
- obj-$(CONFIG_ATH79)			+= irq-ath79-misc.o
- obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
- obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2836.o
---- /dev/null
-+++ b/drivers/irqchip/irq-ath79-intc.c
-@@ -0,0 +1,142 @@
-+/*
-+ *  Atheros AR71xx/AR724x/AR913x specific interrupt handling
-+ *
-+ *  Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/irqchip.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+
-+#include <asm/irq_cpu.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#define ATH79_MAX_INTC_CASCADE	3
-+
-+struct ath79_intc {
-+	struct irq_chip chip;
-+	u32 irq;
-+	u32 pending_mask;
-+	u32 int_status;
-+	u32 irq_mask[ATH79_MAX_INTC_CASCADE];
-+	u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE];
-+};
-+
-+static void ath79_intc_irq_handler(struct irq_desc *desc)
-+{
-+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-+	struct ath79_intc *intc = domain->host_data;
-+	u32 pending;
-+
-+	pending = ath79_reset_rr(intc->int_status);
-+	pending &= intc->pending_mask;
-+
-+	if (pending) {
-+		int i;
-+
-+		for (i = 0; i < domain->hwirq_max; i++)
-+			if (pending & intc->irq_mask[i]) {
-+				if (intc->irq_wb_chan[i] != 0xffffffff)
-+					ath79_ddr_wb_flush(intc->irq_wb_chan[i]);
-+				generic_handle_irq(irq_find_mapping(domain, i));
-+			}
-+	} else {
-+		spurious_interrupt();
-+	}
-+}
-+
-+static void ath79_intc_irq_enable(struct irq_data *d)
-+{
-+	struct ath79_intc *intc = d->domain->host_data;
-+	enable_irq(intc->irq);
-+}
-+
-+static void ath79_intc_irq_disable(struct irq_data *d)
-+{
-+	struct ath79_intc *intc = d->domain->host_data;
-+	disable_irq(intc->irq);
-+}
-+
-+static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ath79_intc *intc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ath79_irq_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ath79_intc_map,
-+};
-+
-+static int __init ath79_intc_of_init(
-+	struct device_node *node, struct device_node *parent)
-+{
-+	struct irq_domain *domain;
-+	struct ath79_intc *intc;
-+	int cnt, cntwb, i, err;
-+
-+	cnt = of_property_count_u32_elems(node, "qca,pending-bits");
-+	if (cnt > ATH79_MAX_INTC_CASCADE)
-+		panic("Too many INTC pending bits\n");
-+
-+	intc = kzalloc(sizeof(*intc), GFP_KERNEL);
-+	if (!intc)
-+		panic("Failed to allocate INTC memory\n");
-+	intc->chip = dummy_irq_chip;
-+	intc->chip.name = "INTC";
-+	intc->chip.irq_disable = ath79_intc_irq_disable;
-+	intc->chip.irq_enable = ath79_intc_irq_enable;
-+
-+	if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) {
-+		panic("Missing address of interrupt status register\n");
-+	}
-+
-+	of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt);
-+	for (i = 0; i < cnt; i++) {
-+		intc->pending_mask |= intc->irq_mask[i];
-+		intc->irq_wb_chan[i] = 0xffffffff;
-+	}
-+
-+	cntwb = of_count_phandle_with_args(
-+		node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-+
-+	for (i = 0; i < cntwb; i++) {
-+		struct of_phandle_args args;
-+		u32 irq = i;
-+
-+		of_property_read_u32_index(
-+			node, "qca,ddr-wb-channel-interrupts", i, &irq);
-+		if (irq >= ATH79_MAX_INTC_CASCADE)
-+			continue;
-+
-+		err = of_parse_phandle_with_args(
-+			node, "qca,ddr-wb-channels",
-+			"#qca,ddr-wb-channel-cells",
-+			i, &args);
-+		if (err)
-+			return err;
-+
-+		intc->irq_wb_chan[irq] = args.args[0];
-+	}
-+
-+	intc->irq = irq_of_parse_and_map(node, 0);
-+	if (!intc->irq)
-+		panic("Failed to get INTC IRQ");
-+
-+	domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc);
-+	irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain);
-+
-+	return 0;
-+}
-+IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc",
-+		ath79_intc_of_init);
diff --git a/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
deleted file mode 100644
index b5ad731d06..0000000000
--- a/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:58:19 +0100
-Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/irq-ath79-cpu.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/irqchip/irq-ath79-cpu.c
-+++ b/drivers/irqchip/irq-ath79-cpu.c
-@@ -88,10 +88,3 @@ static int __init ar79_cpu_intc_of_init(
- }
- IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
- 		ar79_cpu_intc_of_init);
--
--void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
--{
--	irq_wb_chan[2] = irq_wb_chan2;
--	irq_wb_chan[3] = irq_wb_chan3;
--	mips_cpu_irq_init();
--}
diff --git a/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch b/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch
deleted file mode 100644
index 05db5060b1..0000000000
--- a/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 0c8856211d26f84277f7fcb0b9595e5c646bc464 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:00:55 +0100
-Subject: [PATCH 11/33] MIPS: ath79: select the PINCTRL subsystem
-
-The pinmux on QCA SoCs is controlled by a single register. The
-"pinctrl-single" driver can be used but requires the target
-to select PINCTRL.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -288,6 +288,7 @@ config BCM63XX
- 	select SYS_HAS_EARLY_PRINTK
- 	select SWAP_IO_SPACE
- 	select GPIOLIB
-+	select PINCTRL
- 	select HAVE_CLK
- 	select MIPS_L1_CACHE_SHIFT_4
- 	select CLKDEV_LOOKUP
diff --git a/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch b/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
deleted file mode 100644
index bf7eb691a5..0000000000
--- a/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:10 +0200
-Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7100-pci.txt    | 38 ++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-@@ -0,0 +1,38 @@
-+* Qualcomm Atheros AR7100 PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7100-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+	- "cfg_base"	IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+	properties to define the mapping of the PCIe interface to interrupt
-+	numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+Optional properties:
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+* Example for ar7100
-+	pcie-controller@180c0000 {
-+		compatible = "qca,ar7100-pci";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		bus-range = <0x0 0x0>;
-+		reg = <0x17010000 0x100>;
-+		reg-names = "cfg_base";
-+		ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000
-+			  0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <2>;
-+
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+
-+		interrupt-map-mask = <0 0 0 1>;
-+		interrupt-map = <0 0 0 0 &pcie0 0>;
-+	};
diff --git a/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch b/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch
deleted file mode 100644
index 91796a12f0..0000000000
--- a/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:23 +0200
-Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++-----------------------
- 1 file changed, 41 insertions(+), 41 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -18,8 +18,11 @@
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/interrupt.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
- 
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
-@@ -49,12 +52,13 @@
- #define AR71XX_PCI_IRQ_COUNT		5
- 
- struct ar71xx_pci_controller {
-+	struct device_node *np;
- 	void __iomem *cfg_base;
- 	int irq;
--	int irq_base;
- 	struct pci_controller pci_ctrl;
- 	struct resource io_res;
- 	struct resource mem_res;
-+	struct irq_domain *domain;
- };
- 
- /* Byte lane enable bits */
-@@ -228,29 +232,30 @@ static struct pci_ops ar71xx_pci_ops = {
- 
- static void ar71xx_pci_irq_handler(struct irq_desc *desc)
- {
--	struct ar71xx_pci_controller *apc;
- 	void __iomem *base = ath79_reset_base;
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
- 	u32 pending;
- 
--	apc = irq_desc_get_handler_data(desc);
--
-+	chained_irq_enter(chip, desc);
- 	pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
- 		  __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 
- 	if (pending & AR71XX_PCI_INT_DEV0)
--		generic_handle_irq(apc->irq_base + 0);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- 
- 	else if (pending & AR71XX_PCI_INT_DEV1)
--		generic_handle_irq(apc->irq_base + 1);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 2));
- 
- 	else if (pending & AR71XX_PCI_INT_DEV2)
--		generic_handle_irq(apc->irq_base + 2);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 3));
- 
- 	else if (pending & AR71XX_PCI_INT_CORE)
--		generic_handle_irq(apc->irq_base + 4);
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 4));
- 
- 	else
- 		spurious_interrupt();
-+	chained_irq_exit(chip, desc);
- }
- 
- static void ar71xx_pci_irq_unmask(struct irq_data *d)
-@@ -261,7 +266,7 @@ static void ar71xx_pci_irq_unmask(struct
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
--	irq = d->irq - apc->irq_base;
-+	irq = irq_linear_revmap(apc->domain, d->irq);
- 
- 	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -278,7 +283,7 @@ static void ar71xx_pci_irq_mask(struct i
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
--	irq = d->irq - apc->irq_base;
-+	irq = irq_linear_revmap(apc->domain, d->irq);
- 
- 	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -294,24 +299,31 @@ static struct irq_chip ar71xx_pci_irq_ch
- 	.irq_mask_ack	= ar71xx_pci_irq_mask,
- };
- 
-+static int ar71xx_pci_irq_map(struct irq_domain *d,
-+			      unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ar71xx_pci_controller *apc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
-+	irq_set_chip_data(irq, apc);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ar71xx_pci_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ar71xx_pci_irq_map,
-+};
-+
- static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
- {
- 	void __iomem *base = ath79_reset_base;
--	int i;
- 
- 	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- 	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
- 
--	BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
--
--	apc->irq_base = ATH79_PCI_IRQ_BASE;
--	for (i = apc->irq_base;
--	     i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
--		irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
--					 handle_level_irq);
--		irq_set_chip_data(i, apc);
--	}
--
-+	apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
-+					    &ar71xx_pci_domain_ops, apc);
- 	irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
- 					 apc);
- }
-@@ -328,6 +340,11 @@ static void ar71xx_pci_reset(void)
- 	mdelay(100);
- }
- 
-+static const struct of_device_id ar71xx_pci_ids[] = {
-+	{ .compatible = "qca,ar7100-pci" },
-+	{},
-+};
-+
- static int ar71xx_pci_probe(struct platform_device *pdev)
- {
- 	struct ar71xx_pci_controller *apc;
-@@ -348,26 +365,6 @@ static int ar71xx_pci_probe(struct platf
- 	if (apc->irq < 0)
- 		return -EINVAL;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->io_res.parent = res;
--	apc->io_res.name = "PCI IO space";
--	apc->io_res.start = res->start;
--	apc->io_res.end = res->end;
--	apc->io_res.flags = IORESOURCE_IO;
--
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->mem_res.parent = res;
--	apc->mem_res.name = "PCI memory space";
--	apc->mem_res.start = res->start;
--	apc->mem_res.end = res->end;
--	apc->mem_res.flags = IORESOURCE_MEM;
--
- 	ar71xx_pci_reset();
- 
- 	/* setup COMMAND register */
-@@ -380,9 +377,11 @@ static int ar71xx_pci_probe(struct platf
- 
- 	ar71xx_pci_irq_init(apc);
- 
-+	apc->np = pdev->dev.of_node;
- 	apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- 	apc->pci_ctrl.mem_resource = &apc->mem_res;
- 	apc->pci_ctrl.io_resource = &apc->io_res;
-+	pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node);
- 
- 	register_pci_controller(&apc->pci_ctrl);
- 
-@@ -393,6 +392,7 @@ static struct platform_driver ar71xx_pci
- 	.probe = ar71xx_pci_probe,
- 	.driver = {
- 		.name = "ar71xx-pci",
-+		.of_match_table = of_match_ptr(ar71xx_pci_ids),
- 	},
- };
- 
diff --git a/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch b/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
deleted file mode 100644
index a0af79cb4d..0000000000
--- a/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:02 +0200
-Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7240-pci.txt    | 42 ++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-@@ -0,0 +1,42 @@
-+* Qualcomm Atheros AR724X PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7240-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+	- "crp_base"	Configuration registers
-+	- "ctrl_base"	Control registers
-+	- "cfg_base"	IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+	properties to define the mapping of the PCIe interface to interrupt
-+	numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+Optional properties:
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+* Example for qca9557
-+	pcie-controller@180c0000 {
-+		compatible = "qcom,ar7240-pci";
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+		bus-range = <0x0 0x0>;
-+		reg = <0x180c0000 0x1000>,
-+		      <0x180f0000 0x100>,
-+		      <0x14000000 0x1000>;
-+		reg-names = "crp_base", "ctrl_base", "cfg_base";
-+		ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
-+			  0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+		interrupt-parent = <&intc2>;
-+		interrupts = <1>;
-+
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+
-+		interrupt-map-mask = <0 0 0 1>;
-+		interrupt-map = <0 0 0 0 &pcie0 0>;
-+	};
diff --git a/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch b/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch
deleted file mode 100644
index 936bfd4816..0000000000
--- a/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:37 +0200
-Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 46 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -14,8 +14,11 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
- 
- #define AR724X_PCI_REG_APP		0x00
- #define AR724X_PCI_REG_RESET		0x18
-@@ -45,17 +48,20 @@ struct ar724x_pci_controller {
- 	void __iomem *crp_base;
- 
- 	int irq;
--	int irq_base;
- 
- 	bool link_up;
- 	bool bar0_is_cached;
- 	u32  bar0_value;
- 
-+	struct device_node *np;
- 	struct pci_controller pci_controller;
-+	struct irq_domain *domain;
- 	struct resource io_res;
- 	struct resource mem_res;
- };
- 
-+static struct irq_chip ar724x_pci_irq_chip;
-+
- static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
- {
- 	u32 reset;
-@@ -231,35 +237,31 @@ static struct pci_ops ar724x_pci_ops = {
- 
- static void ar724x_pci_irq_handler(struct irq_desc *desc)
- {
--	struct ar724x_pci_controller *apc;
--	void __iomem *base;
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc);
- 	u32 pending;
- 
--	apc = irq_desc_get_handler_data(desc);
--	base = apc->ctrl_base;
--
--	pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
--		  __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+	chained_irq_enter(chip, desc);
-+	pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) &
-+		  __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK);
- 
- 	if (pending & AR724X_PCI_INT_DEV0)
--		generic_handle_irq(apc->irq_base + 0);
--
-+		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- 	else
- 		spurious_interrupt();
-+	chained_irq_exit(chip, desc);
- }
- 
- static void ar724x_pci_irq_unmask(struct irq_data *d)
- {
- 	struct ar724x_pci_controller *apc;
- 	void __iomem *base;
--	int offset;
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
- 	base = apc->ctrl_base;
--	offset = apc->irq_base - d->irq;
- 
--	switch (offset) {
-+	switch (irq_linear_revmap(apc->domain, d->irq)) {
- 	case 0:
- 		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- 		__raw_writel(t | AR724X_PCI_INT_DEV0,
-@@ -273,14 +275,12 @@ static void ar724x_pci_irq_mask(struct i
- {
- 	struct ar724x_pci_controller *apc;
- 	void __iomem *base;
--	int offset;
- 	u32 t;
- 
- 	apc = irq_data_get_irq_chip_data(d);
- 	base = apc->ctrl_base;
--	offset = apc->irq_base - d->irq;
- 
--	switch (offset) {
-+	switch (irq_linear_revmap(apc->domain, d->irq)) {
- 	case 0:
- 		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- 		__raw_writel(t & ~AR724X_PCI_INT_DEV0,
-@@ -305,26 +305,34 @@ static struct irq_chip ar724x_pci_irq_ch
- 	.irq_mask_ack	= ar724x_pci_irq_mask,
- };
- 
-+static int ar724x_pci_irq_map(struct irq_domain *d,
-+			      unsigned int irq, irq_hw_number_t hw)
-+{
-+	struct ar724x_pci_controller *apc = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq);
-+	irq_set_chip_data(irq, apc);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops ar724x_pci_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = ar724x_pci_irq_map,
-+};
-+
- static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
- 				int id)
- {
- 	void __iomem *base;
--	int i;
- 
- 	base = apc->ctrl_base;
- 
- 	__raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
- 	__raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
- 
--	apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
--
--	for (i = apc->irq_base;
--	     i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
--		irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
--					 handle_level_irq);
--		irq_set_chip_data(i, apc);
--	}
--
-+	apc->domain = irq_domain_add_linear(apc->np, 2,
-+					    &ar724x_pci_domain_ops, apc);
- 	irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler,
- 					 apc);
- }
-@@ -394,29 +402,11 @@ static int ar724x_pci_probe(struct platf
- 	if (apc->irq < 0)
- 		return -EINVAL;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->io_res.parent = res;
--	apc->io_res.name = "PCI IO space";
--	apc->io_res.start = res->start;
--	apc->io_res.end = res->end;
--	apc->io_res.flags = IORESOURCE_IO;
--
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
--	if (!res)
--		return -EINVAL;
--
--	apc->mem_res.parent = res;
--	apc->mem_res.name = "PCI memory space";
--	apc->mem_res.start = res->start;
--	apc->mem_res.end = res->end;
--	apc->mem_res.flags = IORESOURCE_MEM;
--
-+	apc->np = pdev->dev.of_node;
- 	apc->pci_controller.pci_ops = &ar724x_pci_ops;
- 	apc->pci_controller.io_resource = &apc->io_res;
- 	apc->pci_controller.mem_resource = &apc->mem_res;
-+	pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node);
- 
- 	/*
- 	 * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-@@ -438,10 +428,16 @@ static int ar724x_pci_probe(struct platf
- 	return 0;
- }
- 
-+static const struct of_device_id ar724x_pci_ids[] = {
-+	{ .compatible = "qcom,ar7240-pci" },
-+	{},
-+};
-+
- static struct platform_driver ar724x_pci_driver = {
- 	.probe = ar724x_pci_probe,
- 	.driver = {
- 		.name = "ar724x-pci",
-+		.of_match_table = of_match_ptr(ar724x_pci_ids),
- 	},
- };
- 
diff --git a/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch b/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch
deleted file mode 100644
index c273140dfc..0000000000
--- a/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From 288a8eb0d41f09fda242e05f8a7bd1f5b3489477 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:19:26 +0100
-Subject: [PATCH 21/33] MIPS: ath79: add helpers for setting clocks and expose
- the ref clock
-
-Preparation for transitioning the legacy clock setup code over
-to OF.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c               | 128 ++++++++++++++++++----------------
- include/dt-bindings/clock/ath79-clk.h |   3 +-
- 2 files changed, 68 insertions(+), 63 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -37,20 +37,46 @@ static struct clk_onecell_data clk_data
- 	.clk_num = ARRAY_SIZE(clks),
- };
- 
--static struct clk *__init ath79_add_sys_clkdev(
--	const char *id, unsigned long rate)
-+static const char * const clk_names[ATH79_CLK_END] = {
-+	[ATH79_CLK_CPU] = "cpu",
-+	[ATH79_CLK_DDR] = "ddr",
-+	[ATH79_CLK_AHB] = "ahb",
-+	[ATH79_CLK_REF] = "ref",
-+};
-+
-+static const char * __init ath79_clk_name(int type)
- {
--	struct clk *clk;
--	int err;
-+	BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]);
-+	return clk_names[type];
-+}
- 
--	clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-+static void __init __ath79_set_clk(int type, const char *name, struct clk *clk)
-+{
- 	if (IS_ERR(clk))
--		panic("failed to allocate %s clock structure", id);
-+		panic("failed to allocate %s clock structure", clk_names[type]);
- 
--	err = clk_register_clkdev(clk, id, NULL);
--	if (err)
--		panic("unable to register %s clock device", id);
-+	clks[type] = clk;
-+	clk_register_clkdev(clk, name, NULL);
-+}
- 
-+static struct clk * __init ath79_set_clk(int type, unsigned long rate)
-+{
-+	const char *name = ath79_clk_name(type);
-+	struct clk *clk;
-+
-+	clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate);
-+	__ath79_set_clk(type, name, clk);
-+	return clk;
-+}
-+
-+static struct clk * __init ath79_set_ff_clk(int type, const char *parent,
-+					    unsigned int mult, unsigned int div)
-+{
-+	const char *name = ath79_clk_name(type);
-+	struct clk *clk;
-+
-+	clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div);
-+	__ath79_set_clk(type, name, clk);
- 	return clk;
- }
- 
-@@ -80,27 +106,15 @@ static void __init ar71xx_clocks_init(vo
- 	div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
- 	ahb_rate = cpu_rate / div;
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
--	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
--	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ahb", NULL);
- 	clk_add_alias("uart", NULL, "ahb", NULL);
- }
- 
--static struct clk * __init ath79_reg_ffclk(const char *name,
--		const char *parent_name, unsigned int mult, unsigned int div)
--{
--	struct clk *clk;
--
--	clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
--	if (IS_ERR(clk))
--		panic("failed to allocate %s clock structure", name);
--
--	return clk;
--}
--
- static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
- {
- 	u32 pll;
-@@ -114,24 +128,19 @@ static void __init ar724x_clk_init(struc
- 	ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
- 	ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
- 
--	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
--	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
--	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
-+	ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div);
-+	ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div);
-+	ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
- 
- static void __init ar724x_clocks_init(void)
- {
- 	struct clk *ref_clk;
- 
--	ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
-+	ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
- 
- 	ar724x_clk_init(ref_clk, ath79_pll_base);
- 
--	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
--	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
--	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
--	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
--
- 	clk_add_alias("wdt", NULL, "ahb", NULL);
- 	clk_add_alias("uart", NULL, "ahb", NULL);
- }
-@@ -186,12 +195,12 @@ static void __init ar9330_clk_init(struc
- 		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
- 	}
- 
--	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
--					ninit_mul, ref_div * out_div * cpu_div);
--	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
--					ninit_mul, ref_div * out_div * ddr_div);
--	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
--					ninit_mul, ref_div * out_div * ahb_div);
-+	ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul,
-+			 ref_div * out_div * cpu_div);
-+	ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul,
-+			 ref_div * out_div * ddr_div);
-+	ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul,
-+			 ref_div * out_div * ahb_div);
- }
- 
- static void __init ar933x_clocks_init(void)
-@@ -206,15 +215,10 @@ static void __init ar933x_clocks_init(vo
- 	else
- 		ref_rate = (25 * 1000 * 1000);
- 
--	ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
-+	ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 
- 	ar9330_clk_init(ref_clk, ath79_pll_base);
- 
--	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
--	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
--	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
--	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
--
- 	clk_add_alias("wdt", NULL, "ahb", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
- }
-@@ -344,10 +348,10 @@ static void __init ar934x_clocks_init(vo
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
--	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
--	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ref", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
-@@ -431,10 +435,10 @@ static void __init qca953x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	ath79_add_sys_clkdev("cpu", cpu_rate);
--	ath79_add_sys_clkdev("ddr", ddr_rate);
--	ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ref", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
-@@ -516,10 +520,10 @@ static void __init qca955x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
--	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
--	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ref", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
-@@ -620,10 +624,10 @@ static void __init qca956x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_add_sys_clkdev("ref", ref_rate);
--	ath79_add_sys_clkdev("cpu", cpu_rate);
--	ath79_add_sys_clkdev("ddr", ddr_rate);
--	ath79_add_sys_clkdev("ahb", ahb_rate);
-+	ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
- 	clk_add_alias("wdt", NULL, "ref", NULL);
- 	clk_add_alias("uart", NULL, "ref", NULL);
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -13,7 +13,8 @@
- #define ATH79_CLK_CPU		0
- #define ATH79_CLK_DDR		1
- #define ATH79_CLK_AHB		2
-+#define ATH79_CLK_REF		3
- 
--#define ATH79_CLK_END		3
-+#define ATH79_CLK_END		4
- 
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch b/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch
deleted file mode 100644
index 389edc45a8..0000000000
--- a/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 339c191a95e978353c9ba3aafab0261e14de109b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:22:43 +0100
-Subject: [PATCH 22/33] MIPS: ath79: move legacy "wdt" and "uart" clock aliases
- out of soc init
-
-Preparation for reusing functions for DT
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 38 +++++++++++++++++---------------------
- 1 file changed, 17 insertions(+), 21 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -110,9 +110,6 @@ static void __init ar71xx_clocks_init(vo
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
--	clk_add_alias("wdt", NULL, "ahb", NULL);
--	clk_add_alias("uart", NULL, "ahb", NULL);
- }
- 
- static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -140,9 +137,6 @@ static void __init ar724x_clocks_init(vo
- 	ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
- 
- 	ar724x_clk_init(ref_clk, ath79_pll_base);
--
--	clk_add_alias("wdt", NULL, "ahb", NULL);
--	clk_add_alias("uart", NULL, "ahb", NULL);
- }
- 
- static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -218,9 +212,6 @@ static void __init ar933x_clocks_init(vo
- 	ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 
- 	ar9330_clk_init(ref_clk, ath79_pll_base);
--
--	clk_add_alias("wdt", NULL, "ahb", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
- static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
-@@ -353,9 +344,6 @@ static void __init ar934x_clocks_init(vo
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
--	clk_add_alias("wdt", NULL, "ref", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
--
- 	iounmap(dpll_base);
- }
- 
-@@ -439,9 +427,6 @@ static void __init qca953x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
--	clk_add_alias("wdt", NULL, "ref", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
- static void __init qca955x_clocks_init(void)
-@@ -524,9 +509,6 @@ static void __init qca955x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
--	clk_add_alias("wdt", NULL, "ref", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
- static void __init qca956x_clocks_init(void)
-@@ -628,13 +610,13 @@ static void __init qca956x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
--	clk_add_alias("wdt", NULL, "ref", NULL);
--	clk_add_alias("uart", NULL, "ref", NULL);
- }
- 
- void __init ath79_clocks_init(void)
- {
-+	const char *wdt;
-+	const char *uart;
-+
- 	if (soc_is_ar71xx())
- 		ar71xx_clocks_init();
- 	else if (soc_is_ar724x() || soc_is_ar913x())
-@@ -651,6 +633,20 @@ void __init ath79_clocks_init(void)
- 		qca956x_clocks_init();
- 	else
- 		BUG();
-+
-+	if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
-+		wdt = "ahb";
-+		uart = "ahb";
-+	} else if (soc_is_ar933x()) {
-+		wdt = "ahb";
-+		uart = "ref";
-+	} else {
-+		wdt = "ref";
-+		uart = "ref";
-+	}
-+
-+	clk_add_alias("wdt", NULL, wdt, NULL);
-+	clk_add_alias("uart", NULL, uart, NULL);
- }
- 
- unsigned long __init
diff --git a/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch b/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch
deleted file mode 100644
index 6c0f2ad54c..0000000000
--- a/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From 6350b2c36c522fecbc91a80b63f49319dafd2a72 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:23:20 +0100
-Subject: [PATCH 23/33] MIPS: ath79: pass PLL base to clock init functions
-
-Preparation for passing the mapped base via DT
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 60 ++++++++++++++++++++++++-------------------------
- 1 file changed, 30 insertions(+), 30 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -80,7 +80,7 @@ static struct clk * __init ath79_set_ff_
- 	return clk;
- }
- 
--static void __init ar71xx_clocks_init(void)
-+static void __init ar71xx_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -92,7 +92,7 @@ static void __init ar71xx_clocks_init(vo
- 
- 	ref_rate = AR71XX_BASE_FREQ;
- 
--	pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
-+	pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
- 
- 	div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1;
- 	freq = div * ref_rate;
-@@ -130,13 +130,13 @@ static void __init ar724x_clk_init(struc
- 	ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
- 
--static void __init ar724x_clocks_init(void)
-+static void __init ar724x_clocks_init(void __iomem *pll_base)
- {
- 	struct clk *ref_clk;
- 
- 	ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
- 
--	ar724x_clk_init(ref_clk, ath79_pll_base);
-+	ar724x_clk_init(ref_clk, pll_base);
- }
- 
- static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -197,7 +197,7 @@ static void __init ar9330_clk_init(struc
- 			 ref_div * out_div * ahb_div);
- }
- 
--static void __init ar933x_clocks_init(void)
-+static void __init ar933x_clocks_init(void __iomem *pll_base)
- {
- 	struct clk *ref_clk;
- 	unsigned long ref_rate;
-@@ -234,7 +234,7 @@ static u32 __init ar934x_get_pll_freq(u3
- 	return ret;
- }
- 
--static void __init ar934x_clocks_init(void)
-+static void __init ar934x_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -265,7 +265,7 @@ static void __init ar934x_clocks_init(vo
- 			  AR934X_SRIF_DPLL1_REFDIV_MASK;
- 		frac = 1 << 18;
- 	} else {
--		pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
-+		pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG);
- 		out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 			AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
- 		ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -292,7 +292,7 @@ static void __init ar934x_clocks_init(vo
- 			  AR934X_SRIF_DPLL1_REFDIV_MASK;
- 		frac = 1 << 18;
- 	} else {
--		pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-+		pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG);
- 		out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- 			  AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
- 		ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -307,7 +307,7 @@ static void __init ar934x_clocks_init(vo
- 	ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
- 				      nfrac, frac, out_div);
- 
--	clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
-+	clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
- 
- 	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- 		  AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -347,7 +347,7 @@ static void __init ar934x_clocks_init(vo
- 	iounmap(dpll_base);
- }
- 
--static void __init qca953x_clocks_init(void)
-+static void __init qca953x_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -363,7 +363,7 @@ static void __init qca953x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
--	pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -377,7 +377,7 @@ static void __init qca953x_clocks_init(v
- 	cpu_pll += frac * (ref_rate >> 6) / ref_div;
- 	cpu_pll /= (1 << out_div);
- 
--	pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG);
- 	out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- 		  QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -391,7 +391,7 @@ static void __init qca953x_clocks_init(v
- 	ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
- 	ddr_pll /= (1 << out_div);
- 
--	clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+	clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG);
- 
- 	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- 		  QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -429,7 +429,7 @@ static void __init qca953x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
- 
--static void __init qca955x_clocks_init(void)
-+static void __init qca955x_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -445,7 +445,7 @@ static void __init qca955x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
--	pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -459,7 +459,7 @@ static void __init qca955x_clocks_init(v
- 	cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
- 	cpu_pll /= (1 << out_div);
- 
--	pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG);
- 	out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- 		  QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -473,7 +473,7 @@ static void __init qca955x_clocks_init(v
- 	ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
- 	ddr_pll /= (1 << out_div);
- 
--	clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
-+	clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG);
- 
- 	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- 		  QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -511,7 +511,7 @@ static void __init qca955x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
- 
--static void __init qca956x_clocks_init(void)
-+static void __init qca956x_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
- 	unsigned long cpu_rate;
-@@ -537,13 +537,13 @@ static void __init qca956x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
--	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
- 		  QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
- 
--	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
-+	pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG);
- 	nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
- 	       QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
- 	hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
-@@ -556,12 +556,12 @@ static void __init qca956x_clocks_init(v
- 	cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
- 	cpu_pll /= (1 << out_div);
- 
--	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
-+	pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG);
- 	out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- 		  QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
- 	ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
- 		  QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
--	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
-+	pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG);
- 	nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
- 	       QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
- 	hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
-@@ -574,7 +574,7 @@ static void __init qca956x_clocks_init(v
- 	ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
- 	ddr_pll /= (1 << out_div);
- 
--	clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
-+	clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG);
- 
- 	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- 		  QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -618,19 +618,19 @@ void __init ath79_clocks_init(void)
- 	const char *uart;
- 
- 	if (soc_is_ar71xx())
--		ar71xx_clocks_init();
-+		ar71xx_clocks_init(ath79_pll_base);
- 	else if (soc_is_ar724x() || soc_is_ar913x())
--		ar724x_clocks_init();
-+		ar724x_clocks_init(ath79_pll_base);
- 	else if (soc_is_ar933x())
--		ar933x_clocks_init();
-+		ar933x_clocks_init(ath79_pll_base);
- 	else if (soc_is_ar934x())
--		ar934x_clocks_init();
-+		ar934x_clocks_init(ath79_pll_base);
- 	else if (soc_is_qca953x())
--		qca953x_clocks_init();
-+		qca953x_clocks_init(ath79_pll_base);
- 	else if (soc_is_qca955x())
--		qca955x_clocks_init();
-+		qca955x_clocks_init(ath79_pll_base);
- 	else if (soc_is_qca956x() || soc_is_tp9343())
--		qca956x_clocks_init();
-+		qca956x_clocks_init(ath79_pll_base);
- 	else
- 		BUG();
- 
diff --git a/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch b/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch
deleted file mode 100644
index 9ceb643803..0000000000
--- a/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From 5fadb2544ed0bb72ddddd846aa303bb9ed2d211c Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:24:07 +0100
-Subject: [PATCH 24/33] MIPS: ath79: make specifying the reference clock in DT
- optional
-
-It can be autodetected for many SoCs using the strapping options.
-If the clock is specified in DT, the autodetected value is ignored
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 84 +++++++++++++++++++++++--------------------------
- 1 file changed, 40 insertions(+), 44 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -80,6 +80,18 @@ static struct clk * __init ath79_set_ff_
- 	return clk;
- }
- 
-+static unsigned long __init ath79_setup_ref_clk(unsigned long rate)
-+{
-+	struct clk *clk = clks[ATH79_CLK_REF];
-+
-+	if (clk)
-+		rate = clk_get_rate(clk);
-+	else
-+		clk = ath79_set_clk(ATH79_CLK_REF, rate);
-+
-+	return rate;
-+}
-+
- static void __init ar71xx_clocks_init(void __iomem *pll_base)
- {
- 	unsigned long ref_rate;
-@@ -90,7 +102,7 @@ static void __init ar71xx_clocks_init(vo
- 	u32 freq;
- 	u32 div;
- 
--	ref_rate = AR71XX_BASE_FREQ;
-+	ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ);
- 
- 	pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
- 
-@@ -106,16 +118,17 @@ static void __init ar71xx_clocks_init(vo
- 	div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
- 	ahb_rate = cpu_rate / div;
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
- 
--static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-+static void __init ar724x_clocks_init(void __iomem *pll_base)
- {
--	u32 pll;
- 	u32 mult, div, ddr_div, ahb_div;
-+	u32 pll;
-+
-+	ath79_setup_ref_clk(AR71XX_BASE_FREQ);
- 
- 	pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
- 
-@@ -130,17 +143,9 @@ static void __init ar724x_clk_init(struc
- 	ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
- 
--static void __init ar724x_clocks_init(void __iomem *pll_base)
--{
--	struct clk *ref_clk;
--
--	ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
--
--	ar724x_clk_init(ref_clk, pll_base);
--}
--
--static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-+static void __init ar933x_clocks_init(void __iomem *pll_base)
- {
-+	unsigned long ref_rate;
- 	u32 clock_ctrl;
- 	u32 ref_div;
- 	u32 ninit_mul;
-@@ -149,6 +154,15 @@ static void __init ar9330_clk_init(struc
- 	u32 cpu_div;
- 	u32 ddr_div;
- 	u32 ahb_div;
-+	u32 t;
-+
-+	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-+		ref_rate = (40 * 1000 * 1000);
-+	else
-+		ref_rate = (25 * 1000 * 1000);
-+
-+	ath79_setup_ref_clk(ref_rate);
- 
- 	clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
- 	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-@@ -197,23 +211,6 @@ static void __init ar9330_clk_init(struc
- 			 ref_div * out_div * ahb_div);
- }
- 
--static void __init ar933x_clocks_init(void __iomem *pll_base)
--{
--	struct clk *ref_clk;
--	unsigned long ref_rate;
--	u32 t;
--
--	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
--	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
--		ref_rate = (40 * 1000 * 1000);
--	else
--		ref_rate = (25 * 1000 * 1000);
--
--	ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
--
--	ar9330_clk_init(ref_clk, ath79_pll_base);
--}
--
- static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
- 				      u32 frac, u32 out_div)
- {
-@@ -253,6 +250,8 @@ static void __init ar934x_clocks_init(vo
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
-+	ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- 	pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
- 	if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
- 		out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
-@@ -339,7 +338,6 @@ static void __init ar934x_clocks_init(vo
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -363,6 +361,8 @@ static void __init qca953x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
-+	ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- 	pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -423,7 +423,6 @@ static void __init qca953x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -445,6 +444,8 @@ static void __init qca955x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
-+	ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- 	pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -505,7 +506,6 @@ static void __init qca955x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -537,6 +537,8 @@ static void __init qca956x_clocks_init(v
- 	else
- 		ref_rate = 25 * 1000 * 1000;
- 
-+	ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- 	pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
- 	out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- 		  QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -606,7 +608,6 @@ static void __init qca956x_clocks_init(v
- 	else
- 		ahb_rate = cpu_pll / (postdiv + 1);
- 
--	ath79_set_clk(ATH79_CLK_REF, ref_rate);
- 	ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -682,10 +683,8 @@ static void __init ath79_clocks_init_dt_
- 	void __iomem *pll_base;
- 
- 	ref_clk = of_clk_get(np, 0);
--	if (IS_ERR(ref_clk)) {
--		pr_err("%pOF: of_clk_get failed\n", np);
--		goto err;
--	}
-+	if (!IS_ERR(ref_clk))
-+		clks[ATH79_CLK_REF] = ref_clk;
- 
- 	pll_base = of_iomap(np, 0);
- 	if (!pll_base) {
-@@ -694,9 +693,9 @@ static void __init ath79_clocks_init_dt_
- 	}
- 
- 	if (of_device_is_compatible(np, "qca,ar9130-pll"))
--		ar724x_clk_init(ref_clk, pll_base);
-+		ar724x_clocks_init(pll_base);
- 	else if (of_device_is_compatible(np, "qca,ar9330-pll"))
--		ar9330_clk_init(ref_clk, pll_base);
-+		ar933x_clocks_init(pll_base);
- 	else {
- 		pr_err("%pOF: could not find any appropriate clk_init()\n", np);
- 		goto err_iounmap;
-@@ -714,9 +713,6 @@ err_iounmap:
- 
- err_clk:
- 	clk_put(ref_clk);
--
--err:
--	return;
- }
- CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
- CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
diff --git a/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch b/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch
deleted file mode 100644
index 13f46a9146..0000000000
--- a/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 6325626de001df98aebe51f3008b1aca05798d19 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:26:27 +0100
-Subject: [PATCH 25/33] MIPS: ath79: support setting up clock via DT on all SoC
- types
-
-Use the same functions as the legacy code
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 39 ++++++++++++++++++++++-----------------
- 1 file changed, 22 insertions(+), 17 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -669,16 +669,6 @@ ath79_get_sys_clk_rate(const char *id)
- #ifdef CONFIG_OF
- static void __init ath79_clocks_init_dt(struct device_node *np)
- {
--	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
--}
--
--CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
--
--static void __init ath79_clocks_init_dt_ng(struct device_node *np)
--{
- 	struct clk *ref_clk;
- 	void __iomem *pll_base;
- 
-@@ -692,14 +682,21 @@ static void __init ath79_clocks_init_dt_
- 		goto err_clk;
- 	}
- 
--	if (of_device_is_compatible(np, "qca,ar9130-pll"))
-+	if (of_device_is_compatible(np, "qca,ar7100-pll"))
-+		ar71xx_clocks_init(pll_base);
-+	else if (of_device_is_compatible(np, "qca,ar7240-pll") ||
-+		 of_device_is_compatible(np, "qca,ar9130-pll"))
- 		ar724x_clocks_init(pll_base);
- 	else if (of_device_is_compatible(np, "qca,ar9330-pll"))
- 		ar933x_clocks_init(pll_base);
--	else {
--		pr_err("%pOF: could not find any appropriate clk_init()\n", np);
--		goto err_iounmap;
--	}
-+	else if (of_device_is_compatible(np, "qca,ar9340-pll"))
-+		ar934x_clocks_init(pll_base);
-+	else if (of_device_is_compatible(np, "qca,qca9530-pll"))
-+		qca953x_clocks_init(pll_base);
-+	else if (of_device_is_compatible(np, "qca,qca9550-pll"))
-+		qca955x_clocks_init(pll_base);
-+	else if (of_device_is_compatible(np, "qca,qca9560-pll"))
-+		qca956x_clocks_init(pll_base);
- 
- 	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- 		pr_err("%pOF: could not register clk provider\n", np);
-@@ -714,6 +711,14 @@ err_iounmap:
- err_clk:
- 	clk_put(ref_clk);
- }
--CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
--CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
-+
-+CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
-+
- #endif
diff --git a/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch b/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch
deleted file mode 100644
index 27adb56f56..0000000000
--- a/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 78538d673801902108797f2c813e70cfbce280c9 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:27:28 +0100
-Subject: [PATCH 26/33] MIPS: ath79: export switch MDIO reference clock
-
-On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz
-clock. If that feature is not used, it defaults to the main reference
-clock, like on all other SoC.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c               | 8 ++++++++
- include/dt-bindings/clock/ath79-clk.h | 3 ++-
- 2 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -42,6 +42,7 @@ static const char * const clk_names[ATH7
- 	[ATH79_CLK_DDR] = "ddr",
- 	[ATH79_CLK_AHB] = "ahb",
- 	[ATH79_CLK_REF] = "ref",
-+	[ATH79_CLK_MDIO] = "mdio",
- };
- 
- static const char * __init ath79_clk_name(int type)
-@@ -342,6 +343,10 @@ static void __init ar934x_clocks_init(vo
- 	ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- 
-+	clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
-+	if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
-+		ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
-+
- 	iounmap(dpll_base);
- }
- 
-@@ -698,6 +703,9 @@ static void __init ath79_clocks_init_dt(
- 	else if (of_device_is_compatible(np, "qca,qca9560-pll"))
- 		qca956x_clocks_init(pll_base);
- 
-+	if (!clks[ATH79_CLK_MDIO])
-+		clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
-+
- 	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- 		pr_err("%pOF: could not register clk provider\n", np);
- 		goto err_iounmap;
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -14,7 +14,8 @@
- #define ATH79_CLK_DDR		1
- #define ATH79_CLK_AHB		2
- #define ATH79_CLK_REF		3
-+#define ATH79_CLK_MDIO		4
- 
--#define ATH79_CLK_END		4
-+#define ATH79_CLK_END		5
- 
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch b/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch
deleted file mode 100644
index 6586f08431..0000000000
--- a/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch
+++ /dev/null
@@ -1,233 +0,0 @@
-From 3765b1f79593a0a9098ed15e48074c95403a53ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:05:08 +0200
-Subject: [PATCH 27/33] MIPS: ath79: drop legacy IRQ code
-
-With the target now being fully OF based, we can drop the legacy IRQ code.
-All IRQs are now handled via the new irqchip drivers.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile                 |   2 +-
- arch/mips/ath79/irq.c                    | 169 -------------------------------
- arch/mips/ath79/setup.c                  |   6 ++
- arch/mips/include/asm/mach-ath79/ath79.h |   4 -
- 4 files changed, 7 insertions(+), 174 deletions(-)
- delete mode 100644 arch/mips/ath79/irq.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -8,7 +8,7 @@
- # under the terms of the GNU General Public License version 2 as published
- # by the Free Software Foundation.
- 
--obj-y	:= prom.o setup.o irq.o common.o clock.o
-+obj-y	:= prom.o setup.o common.o clock.o
- 
- obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
- obj-$(CONFIG_PCI)			+= pci.o
---- a/arch/mips/ath79/irq.c
-+++ /dev/null
-@@ -1,169 +0,0 @@
--/*
-- *  Atheros AR71xx/AR724x/AR913x specific interrupt handling
-- *
-- *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/irqchip.h>
--#include <linux/of_irq.h>
--
--#include <asm/irq_cpu.h>
--#include <asm/mipsregs.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "machtypes.h"
--
--
--static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
--{
--	u32 status;
--
--	status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
--
--	if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
--		ath79_ddr_wb_flush(3);
--		generic_handle_irq(ATH79_IP2_IRQ(0));
--	} else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
--		ath79_ddr_wb_flush(4);
--		generic_handle_irq(ATH79_IP2_IRQ(1));
--	} else {
--		spurious_interrupt();
--	}
--}
--
--static void ar934x_ip2_irq_init(void)
--{
--	int i;
--
--	for (i = ATH79_IP2_IRQ_BASE;
--	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
--		irq_set_chip_and_handler(i, &dummy_irq_chip,
--					 handle_level_irq);
--
--	irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
--}
--
--static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
--{
--	u32 status;
--
--	status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
--	status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
--
--	if (status == 0) {
--		spurious_interrupt();
--		return;
--	}
--
--	if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP2_IRQ(0));
--	}
--
--	if (status & QCA955X_EXT_INT_WMAC_ALL) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP2_IRQ(1));
--	}
--}
--
--static void qca955x_ip3_irq_dispatch(struct irq_desc *desc)
--{
--	u32 status;
--
--	status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
--	status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
--		  QCA955X_EXT_INT_USB1 |
--		  QCA955X_EXT_INT_USB2;
--
--	if (status == 0) {
--		spurious_interrupt();
--		return;
--	}
--
--	if (status & QCA955X_EXT_INT_USB1) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP3_IRQ(0));
--	}
--
--	if (status & QCA955X_EXT_INT_USB2) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP3_IRQ(1));
--	}
--
--	if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
--		/* TODO: flush DDR? */
--		generic_handle_irq(ATH79_IP3_IRQ(2));
--	}
--}
--
--static void qca955x_irq_init(void)
--{
--	int i;
--
--	for (i = ATH79_IP2_IRQ_BASE;
--	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
--		irq_set_chip_and_handler(i, &dummy_irq_chip,
--					 handle_level_irq);
--
--	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
--
--	for (i = ATH79_IP3_IRQ_BASE;
--	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
--		irq_set_chip_and_handler(i, &dummy_irq_chip,
--					 handle_level_irq);
--
--	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
--}
--
--void __init arch_init_irq(void)
--{
--	unsigned irq_wb_chan2 = -1;
--	unsigned irq_wb_chan3 = -1;
--	bool misc_is_ar71xx;
--
--	if (mips_machtype == ATH79_MACH_GENERIC_OF) {
--		irqchip_init();
--		return;
--	}
--
--	if (soc_is_ar71xx() || soc_is_ar724x() ||
--	    soc_is_ar913x() || soc_is_ar933x()) {
--		irq_wb_chan2 = 3;
--		irq_wb_chan3 = 2;
--	} else if (soc_is_ar934x()) {
--		irq_wb_chan3 = 2;
--	}
--
--	ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
--
--	if (soc_is_ar71xx() || soc_is_ar913x())
--		misc_is_ar71xx = true;
--	else if (soc_is_ar724x() ||
--		 soc_is_ar933x() ||
--		 soc_is_ar934x() ||
--		 soc_is_qca955x())
--		misc_is_ar71xx = false;
--	else
--		BUG();
--	ath79_misc_irq_init(
--		ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
--		ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
--
--	if (soc_is_ar934x())
--		ar934x_ip2_irq_init();
--	else if (soc_is_qca955x())
--		qca955x_irq_init();
--}
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -19,6 +19,7 @@
- #include <linux/clk.h>
- #include <linux/clk-provider.h>
- #include <linux/of_fdt.h>
-+#include <linux/irqchip.h>
- 
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
-@@ -305,6 +306,11 @@ void __init plat_time_init(void)
- 	mips_hpt_frequency = cpu_clk_rate / 2;
- }
- 
-+void __init arch_init_irq(void)
-+{
-+	irqchip_init();
-+}
-+
- static int __init ath79_setup(void)
- {
- 	if  (mips_machtype == ATH79_MACH_GENERIC_OF)
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -178,8 +178,4 @@ static inline u32 ath79_reset_rr(unsigne
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
- 
--void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
--void ath79_misc_irq_init(void __iomem *regs, int irq,
--			int irq_base, bool is_ar71xx);
--
- #endif /* __ASM_MACH_ATH79_H */
diff --git a/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch b/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch
deleted file mode 100644
index 1901e6e437..0000000000
--- a/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch
+++ /dev/null
@@ -1,1048 +0,0 @@
-From badf28957b6dc400dff27bd23ba2ae75d9514be5 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:04:09 +0200
-Subject: [PATCH 28/33] MIPS: ath79: drop machfiles
-
-With the target now being fully OF based, we can drop the legacy mach
-files. Boards can now boot fully of devicetree files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig              |   1 -
- arch/mips/ath79/Kconfig        |  73 -------------------
- arch/mips/ath79/Makefile       |  10 ---
- arch/mips/ath79/clock.c        |   1 -
- arch/mips/ath79/mach-ap121.c   |  92 ------------------------
- arch/mips/ath79/mach-ap136.c   | 156 -----------------------------------------
- arch/mips/ath79/mach-ap81.c    | 100 --------------------------
- arch/mips/ath79/mach-db120.c   | 136 -----------------------------------
- arch/mips/ath79/mach-pb44.c    | 128 ---------------------------------
- arch/mips/ath79/mach-ubnt-xm.c | 126 ---------------------------------
- arch/mips/ath79/machtypes.h    |  28 --------
- arch/mips/ath79/setup.c        |  77 +++-----------------
- 12 files changed, 9 insertions(+), 919 deletions(-)
- delete mode 100644 arch/mips/ath79/mach-ap121.c
- delete mode 100644 arch/mips/ath79/mach-ap136.c
- delete mode 100644 arch/mips/ath79/mach-ap81.c
- delete mode 100644 arch/mips/ath79/mach-db120.c
- delete mode 100644 arch/mips/ath79/mach-pb44.c
- delete mode 100644 arch/mips/ath79/mach-ubnt-xm.c
- delete mode 100644 arch/mips/ath79/machtypes.h
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -202,7 +202,6 @@ config ATH79
- 	select COMMON_CLK
- 	select CLKDEV_LOOKUP
- 	select IRQ_MIPS_CPU
--	select MIPS_MACHINE
- 	select SYS_HAS_CPU_MIPS32_R2
- 	select SYS_HAS_EARLY_PRINTK
- 	select SYS_SUPPORTS_32BIT_KERNEL
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,79 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
- 
--menu "Atheros AR71XX/AR724X/AR913X machine selection"
--
--config ATH79_MACH_AP121
--	bool "Atheros AP121 reference board"
--	select SOC_AR933X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP121 reference board.
--
--config ATH79_MACH_AP136
--	bool "Atheros AP136 reference board"
--	select SOC_QCA955X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP136 reference board.
--
--config ATH79_MACH_AP81
--	bool "Atheros AP81 reference board"
--	select SOC_AR913X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP81 reference board.
--
--config ATH79_MACH_DB120
--	bool "Atheros DB120 reference board"
--	select SOC_AR934X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	select ATH79_DEV_WMAC
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros DB120 reference board.
--
--config ATH79_MACH_PB44
--	bool "Atheros PB44 reference board"
--	select SOC_AR71XX
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	select ATH79_DEV_USB
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Atheros PB44 reference board.
--
--config ATH79_MACH_UBNT_XM
--	bool "Ubiquiti Networks XM (rev 1.0) board"
--	select SOC_AR724X
--	select ATH79_DEV_GPIO_BUTTONS
--	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
--	help
--	  Say 'Y' here if you want your kernel to support the
--	  Ubiquiti Networks XM (rev 1.0) board.
--
--endmenu
--
- config SOC_AR71XX
- 	select HW_HAS_PCI
- 	def_bool n
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -22,13 +22,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev
- obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
- obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
- obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
--
--#
--# Machines
--#
--obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
--obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
--obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
--obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
--obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
--obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -26,7 +26,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "machtypes.h"
- 
- #define AR71XX_BASE_FREQ	40000000
- #define AR724X_BASE_FREQ	40000000
---- a/arch/mips/ath79/mach-ap121.c
-+++ /dev/null
-@@ -1,92 +0,0 @@
--/*
-- *  Atheros AP121 board support
-- *
-- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--
--#define AP121_GPIO_LED_WLAN		0
--#define AP121_GPIO_LED_USB		1
--
--#define AP121_GPIO_BTN_JUMPSTART	11
--#define AP121_GPIO_BTN_RESET		12
--
--#define AP121_KEYS_POLL_INTERVAL	20	/* msecs */
--#define AP121_KEYS_DEBOUNCE_INTERVAL	(3 * AP121_KEYS_POLL_INTERVAL)
--
--#define AP121_CAL_DATA_ADDR	0x1fff1000
--
--static struct gpio_led ap121_leds_gpio[] __initdata = {
--	{
--		.name		= "ap121:green:usb",
--		.gpio		= AP121_GPIO_LED_USB,
--		.active_low	= 0,
--	},
--	{
--		.name		= "ap121:green:wlan",
--		.gpio		= AP121_GPIO_LED_WLAN,
--		.active_low	= 0,
--	},
--};
--
--static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
--	{
--		.desc		= "jumpstart button",
--		.type		= EV_KEY,
--		.code		= KEY_WPS_BUTTON,
--		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP121_GPIO_BTN_JUMPSTART,
--		.active_low	= 1,
--	},
--	{
--		.desc		= "reset button",
--		.type		= EV_KEY,
--		.code		= KEY_RESTART,
--		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP121_GPIO_BTN_RESET,
--		.active_low	= 1,
--	}
--};
--
--static struct spi_board_info ap121_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l1606e",
--	}
--};
--
--static struct ath79_spi_platform_data ap121_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect = 1,
--};
--
--static void __init ap121_setup(void)
--{
--	u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
--				 ap121_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ap121_gpio_keys),
--					ap121_gpio_keys);
--
--	ath79_register_spi(&ap121_spi_data, ap121_spi_info,
--			   ARRAY_SIZE(ap121_spi_info));
--	ath79_register_usb();
--	ath79_register_wmac(cal_data);
--}
--
--MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
--	     ap121_setup);
---- a/arch/mips/ath79/mach-ap136.c
-+++ /dev/null
-@@ -1,156 +0,0 @@
--/*
-- * Qualcomm Atheros AP136 reference board support
-- *
-- * Copyright (c) 2012 Qualcomm Atheros
-- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-- *
-- */
--
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--#include "pci.h"
--
--#define AP136_GPIO_LED_STATUS_RED	14
--#define AP136_GPIO_LED_STATUS_GREEN	19
--#define AP136_GPIO_LED_USB		4
--#define AP136_GPIO_LED_WLAN_2G		13
--#define AP136_GPIO_LED_WLAN_5G		12
--#define AP136_GPIO_LED_WPS_RED		15
--#define AP136_GPIO_LED_WPS_GREEN	20
--
--#define AP136_GPIO_BTN_WPS		16
--#define AP136_GPIO_BTN_RFKILL		21
--
--#define AP136_KEYS_POLL_INTERVAL	20	/* msecs */
--#define AP136_KEYS_DEBOUNCE_INTERVAL	(3 * AP136_KEYS_POLL_INTERVAL)
--
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
--
--static struct gpio_led ap136_leds_gpio[] __initdata = {
--	{
--		.name		= "qca:green:status",
--		.gpio		= AP136_GPIO_LED_STATUS_GREEN,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:red:status",
--		.gpio		= AP136_GPIO_LED_STATUS_RED,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:green:wps",
--		.gpio		= AP136_GPIO_LED_WPS_GREEN,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:red:wps",
--		.gpio		= AP136_GPIO_LED_WPS_RED,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:red:wlan-2g",
--		.gpio		= AP136_GPIO_LED_WLAN_2G,
--		.active_low	= 1,
--	},
--	{
--		.name		= "qca:red:usb",
--		.gpio		= AP136_GPIO_LED_USB,
--		.active_low	= 1,
--	}
--};
--
--static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
--	{
--		.desc		= "WPS button",
--		.type		= EV_KEY,
--		.code		= KEY_WPS_BUTTON,
--		.debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP136_GPIO_BTN_WPS,
--		.active_low	= 1,
--	},
--	{
--		.desc		= "RFKILL button",
--		.type		= EV_KEY,
--		.code		= KEY_RFKILL,
--		.debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP136_GPIO_BTN_RFKILL,
--		.active_low	= 1,
--	},
--};
--
--static struct spi_board_info ap136_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l6405d",
--	}
--};
--
--static struct ath79_spi_platform_data ap136_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect	= 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
--
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
--{
--	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
--		dev->dev.platform_data = &ap136_ath9k_data;
--
--	return 0;
--}
--
--static void __init ap136_pci_init(u8 *eeprom)
--{
--	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
--	       sizeof(ap136_ath9k_data.eeprom_data));
--
--	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
--	ath79_register_pci();
--}
--#else
--static inline void ap136_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
--
--static void __init ap136_setup(void)
--{
--	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
--				 ap136_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ap136_gpio_keys),
--					ap136_gpio_keys);
--	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
--			   ARRAY_SIZE(ap136_spi_info));
--	ath79_register_usb();
--	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
--	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
--}
--
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
--	     "Atheros AP136-010 reference board",
--	     ap136_setup);
---- a/arch/mips/ath79/mach-ap81.c
-+++ /dev/null
-@@ -1,100 +0,0 @@
--/*
-- *  Atheros AP81 board support
-- *
-- *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include "machtypes.h"
--#include "dev-wmac.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--
--#define AP81_GPIO_LED_STATUS	1
--#define AP81_GPIO_LED_AOSS	3
--#define AP81_GPIO_LED_WLAN	6
--#define AP81_GPIO_LED_POWER	14
--
--#define AP81_GPIO_BTN_SW4	12
--#define AP81_GPIO_BTN_SW1	21
--
--#define AP81_KEYS_POLL_INTERVAL		20	/* msecs */
--#define AP81_KEYS_DEBOUNCE_INTERVAL	(3 * AP81_KEYS_POLL_INTERVAL)
--
--#define AP81_CAL_DATA_ADDR	0x1fff1000
--
--static struct gpio_led ap81_leds_gpio[] __initdata = {
--	{
--		.name		= "ap81:green:status",
--		.gpio		= AP81_GPIO_LED_STATUS,
--		.active_low	= 1,
--	}, {
--		.name		= "ap81:amber:aoss",
--		.gpio		= AP81_GPIO_LED_AOSS,
--		.active_low	= 1,
--	}, {
--		.name		= "ap81:green:wlan",
--		.gpio		= AP81_GPIO_LED_WLAN,
--		.active_low	= 1,
--	}, {
--		.name		= "ap81:green:power",
--		.gpio		= AP81_GPIO_LED_POWER,
--		.active_low	= 1,
--	}
--};
--
--static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
--	{
--		.desc		= "sw1",
--		.type		= EV_KEY,
--		.code		= BTN_0,
--		.debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP81_GPIO_BTN_SW1,
--		.active_low	= 1,
--	} , {
--		.desc		= "sw4",
--		.type		= EV_KEY,
--		.code		= BTN_1,
--		.debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= AP81_GPIO_BTN_SW4,
--		.active_low	= 1,
--	}
--};
--
--static struct spi_board_info ap81_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "m25p64",
--	}
--};
--
--static struct ath79_spi_platform_data ap81_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect = 1,
--};
--
--static void __init ap81_setup(void)
--{
--	u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
--				 ap81_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ap81_gpio_keys),
--					ap81_gpio_keys);
--	ath79_register_spi(&ap81_spi_data, ap81_spi_info,
--			   ARRAY_SIZE(ap81_spi_info));
--	ath79_register_wmac(cal_data);
--	ath79_register_usb();
--}
--
--MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
--	     ap81_setup);
---- a/arch/mips/ath79/mach-db120.c
-+++ /dev/null
-@@ -1,136 +0,0 @@
--/*
-- * Atheros DB120 reference board support
-- *
-- * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-- *
-- */
--
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--#include "pci.h"
--
--#define DB120_GPIO_LED_WLAN_5G		12
--#define DB120_GPIO_LED_WLAN_2G		13
--#define DB120_GPIO_LED_STATUS		14
--#define DB120_GPIO_LED_WPS		15
--
--#define DB120_GPIO_BTN_WPS		16
--
--#define DB120_KEYS_POLL_INTERVAL	20	/* msecs */
--#define DB120_KEYS_DEBOUNCE_INTERVAL	(3 * DB120_KEYS_POLL_INTERVAL)
--
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
--
--static struct gpio_led db120_leds_gpio[] __initdata = {
--	{
--		.name		= "db120:green:status",
--		.gpio		= DB120_GPIO_LED_STATUS,
--		.active_low	= 1,
--	},
--	{
--		.name		= "db120:green:wps",
--		.gpio		= DB120_GPIO_LED_WPS,
--		.active_low	= 1,
--	},
--	{
--		.name		= "db120:green:wlan-5g",
--		.gpio		= DB120_GPIO_LED_WLAN_5G,
--		.active_low	= 1,
--	},
--	{
--		.name		= "db120:green:wlan-2g",
--		.gpio		= DB120_GPIO_LED_WLAN_2G,
--		.active_low	= 1,
--	},
--};
--
--static struct gpio_keys_button db120_gpio_keys[] __initdata = {
--	{
--		.desc		= "WPS button",
--		.type		= EV_KEY,
--		.code		= KEY_WPS_BUTTON,
--		.debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= DB120_GPIO_BTN_WPS,
--		.active_low	= 1,
--	},
--};
--
--static struct spi_board_info db120_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "s25sl064a",
--	}
--};
--
--static struct ath79_spi_platform_data db120_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
--	switch (PCI_SLOT(dev->devfn)) {
--	case 0:
--		dev->dev.platform_data = &db120_ath9k_data;
--		break;
--	}
--
--	return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
--	memcpy(db120_ath9k_data.eeprom_data, eeprom,
--	       sizeof(db120_ath9k_data.eeprom_data));
--
--	ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
--	ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
--
--static void __init db120_setup(void)
--{
--	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
--				 db120_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(db120_gpio_keys),
--					db120_gpio_keys);
--	ath79_register_spi(&db120_spi_data, db120_spi_info,
--			   ARRAY_SIZE(db120_spi_info));
--	ath79_register_usb();
--	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
--	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
--}
--
--MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
--	     db120_setup);
---- a/arch/mips/ath79/mach-pb44.c
-+++ /dev/null
-@@ -1,128 +0,0 @@
--/*
-- *  Atheros PB44 reference board support
-- *
-- *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/i2c.h>
--#include <linux/gpio/machine.h>
--#include <linux/platform_data/pcf857x.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "pci.h"
--
--#define PB44_GPIO_I2C_SCL	0
--#define PB44_GPIO_I2C_SDA	1
--
--#define PB44_GPIO_EXP_BASE	16
--#define PB44_GPIO_SW_RESET	(PB44_GPIO_EXP_BASE + 6)
--#define PB44_GPIO_SW_JUMP	(PB44_GPIO_EXP_BASE + 8)
--#define PB44_GPIO_LED_JUMP1	(PB44_GPIO_EXP_BASE + 9)
--#define PB44_GPIO_LED_JUMP2	(PB44_GPIO_EXP_BASE + 10)
--
--#define PB44_KEYS_POLL_INTERVAL		20	/* msecs */
--#define PB44_KEYS_DEBOUNCE_INTERVAL	(3 * PB44_KEYS_POLL_INTERVAL)
--
--static struct gpiod_lookup_table pb44_i2c_gpiod_table = {
--	.dev_id = "i2c-gpio.0",
--	.table = {
--		GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA,
--				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
--		GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL,
--				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
--	},
--};
--
--static struct platform_device pb44_i2c_gpio_device = {
--	.name		= "i2c-gpio",
--	.id		= 0,
--	.dev = {
--		.platform_data	= NULL,
--	}
--};
--
--static struct pcf857x_platform_data pb44_pcf857x_data = {
--	.gpio_base	= PB44_GPIO_EXP_BASE,
--};
--
--static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
--	{
--		I2C_BOARD_INFO("pcf8575", 0x20),
--		.platform_data	= &pb44_pcf857x_data,
--	},
--};
--
--static struct gpio_led pb44_leds_gpio[] __initdata = {
--	{
--		.name		= "pb44:amber:jump1",
--		.gpio		= PB44_GPIO_LED_JUMP1,
--		.active_low	= 1,
--	}, {
--		.name		= "pb44:green:jump2",
--		.gpio		= PB44_GPIO_LED_JUMP2,
--		.active_low	= 1,
--	},
--};
--
--static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
--	{
--		.desc		= "soft_reset",
--		.type		= EV_KEY,
--		.code		= KEY_RESTART,
--		.debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= PB44_GPIO_SW_RESET,
--		.active_low	= 1,
--	} , {
--		.desc		= "jumpstart",
--		.type		= EV_KEY,
--		.code		= KEY_WPS_BUTTON,
--		.debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
--		.gpio		= PB44_GPIO_SW_JUMP,
--		.active_low	= 1,
--	}
--};
--
--static struct spi_board_info pb44_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "m25p64",
--	},
--};
--
--static struct ath79_spi_platform_data pb44_spi_data = {
--	.bus_num		= 0,
--	.num_chipselect		= 1,
--};
--
--static void __init pb44_init(void)
--{
--	gpiod_add_lookup_table(&pb44_i2c_gpiod_table);
--	i2c_register_board_info(0, pb44_i2c_board_info,
--				ARRAY_SIZE(pb44_i2c_board_info));
--	platform_device_register(&pb44_i2c_gpio_device);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
--				 pb44_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(pb44_gpio_keys),
--					pb44_gpio_keys);
--	ath79_register_spi(&pb44_spi_data, pb44_spi_info,
--			   ARRAY_SIZE(pb44_spi_info));
--	ath79_register_usb();
--	ath79_register_pci();
--}
--
--MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
--	     pb44_init);
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ /dev/null
-@@ -1,126 +0,0 @@
--/*
-- *  Ubiquiti Networks XM (rev 1.0) board support
-- *
-- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *
-- *  Derived from: mach-pb44.c
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include <asm/mach-ath79/irq.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "pci.h"
--
--#define UBNT_XM_GPIO_LED_L1		0
--#define UBNT_XM_GPIO_LED_L2		1
--#define UBNT_XM_GPIO_LED_L3		11
--#define UBNT_XM_GPIO_LED_L4		7
--
--#define UBNT_XM_GPIO_BTN_RESET		12
--
--#define UBNT_XM_KEYS_POLL_INTERVAL	20
--#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_XM_KEYS_POLL_INTERVAL)
--
--#define UBNT_XM_EEPROM_ADDR		(u8 *) KSEG1ADDR(0x1fff1000)
--
--static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
--	{
--		.name		= "ubnt-xm:red:link1",
--		.gpio		= UBNT_XM_GPIO_LED_L1,
--		.active_low	= 0,
--	}, {
--		.name		= "ubnt-xm:orange:link2",
--		.gpio		= UBNT_XM_GPIO_LED_L2,
--		.active_low	= 0,
--	}, {
--		.name		= "ubnt-xm:green:link3",
--		.gpio		= UBNT_XM_GPIO_LED_L3,
--		.active_low	= 0,
--	}, {
--		.name		= "ubnt-xm:green:link4",
--		.gpio		= UBNT_XM_GPIO_LED_L4,
--		.active_low	= 0,
--	},
--};
--
--static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
--	{
--		.desc			= "reset",
--		.type			= EV_KEY,
--		.code			= KEY_RESTART,
--		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
--		.gpio			= UBNT_XM_GPIO_BTN_RESET,
--		.active_low		= 1,
--	}
--};
--
--static struct spi_board_info ubnt_xm_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l6405d",
--	}
--};
--
--static struct ath79_spi_platform_data ubnt_xm_spi_data = {
--	.bus_num		= 0,
--	.num_chipselect		= 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ubnt_xm_eeprom_data;
--
--static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
--{
--	switch (PCI_SLOT(dev->devfn)) {
--	case 0:
--		dev->dev.platform_data = &ubnt_xm_eeprom_data;
--		break;
--	}
--
--	return 0;
--}
--
--static void __init ubnt_xm_pci_init(void)
--{
--	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
--	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
--
--	ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
--	ath79_register_pci();
--}
--#else
--static inline void ubnt_xm_pci_init(void) {}
--#endif /* CONFIG_PCI */
--
--static void __init ubnt_xm_init(void)
--{
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
--				 ubnt_xm_leds_gpio);
--
--	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ubnt_xm_gpio_keys),
--					ubnt_xm_gpio_keys);
--
--	ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
--			   ARRAY_SIZE(ubnt_xm_spi_info));
--
--	ubnt_xm_pci_init();
--}
--
--MIPS_MACHINE(ATH79_MACH_UBNT_XM,
--	     "UBNT-XM",
--	     "Ubiquiti Networks XM (rev 1.0) board",
--	     ubnt_xm_init);
---- a/arch/mips/ath79/machtypes.h
-+++ /dev/null
-@@ -1,28 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X machine type definitions
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_MACHTYPE_H
--#define _ATH79_MACHTYPE_H
--
--#include <asm/mips_machine.h>
--
--enum ath79_mach_type {
--	ATH79_MACH_GENERIC_OF = -1,	/* Device tree board */
--	ATH79_MACH_GENERIC = 0,
--	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
--	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
--	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
--	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
--	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
--	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
--};
--
--#endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -33,7 +33,6 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
- #include "dev-common.h"
--#include "machtypes.h"
- 
- #define ATH79_SYS_TYPE_LEN	64
- 
-@@ -230,25 +229,21 @@ void __init plat_mem_setup(void)
- 	else if (fw_passed_dtb)
- 		__dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
- 
--	if (mips_machtype != ATH79_MACH_GENERIC_OF) {
--		ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
--						   AR71XX_RESET_SIZE);
--		ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
--						 AR71XX_PLL_SIZE);
--		ath79_detect_sys_type();
--		ath79_ddr_ctrl_init();
-+	ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-+					   AR71XX_RESET_SIZE);
-+	ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
-+					 AR71XX_PLL_SIZE);
-+	ath79_detect_sys_type();
-+	ath79_ddr_ctrl_init();
- 
--		detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
--
--		/* OF machines should use the reset driver */
--		_machine_restart = ath79_restart;
--	}
-+	detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
- 
-+	_machine_restart = ath79_restart;
- 	_machine_halt = ath79_halt;
- 	pm_power_off = ath79_halt;
- }
- 
--static void __init ath79_of_plat_time_init(void)
-+void __init plat_time_init(void)
- {
- 	struct device_node *np;
- 	struct clk *clk;
-@@ -278,66 +273,12 @@ static void __init ath79_of_plat_time_in
- 	clk_put(clk);
- }
- 
--void __init plat_time_init(void)
--{
--	unsigned long cpu_clk_rate;
--	unsigned long ahb_clk_rate;
--	unsigned long ddr_clk_rate;
--	unsigned long ref_clk_rate;
--
--	if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
--		ath79_of_plat_time_init();
--		return;
--	}
--
--	ath79_clocks_init();
--
--	cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
--	ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
--	ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
--	ref_clk_rate = ath79_get_sys_clk_rate("ref");
--
--	pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
--		cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
--		ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
--		ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
--		ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
--
--	mips_hpt_frequency = cpu_clk_rate / 2;
--}
--
- void __init arch_init_irq(void)
- {
- 	irqchip_init();
- }
- 
--static int __init ath79_setup(void)
--{
--	if  (mips_machtype == ATH79_MACH_GENERIC_OF)
--		return 0;
--
--	ath79_gpio_init();
--	ath79_register_uart();
--	ath79_register_wdt();
--
--	mips_machine_setup();
--
--	return 0;
--}
--
--arch_initcall(ath79_setup);
--
- void __init device_tree_init(void)
- {
- 	unflatten_and_copy_device_tree();
- }
--
--MIPS_MACHINE(ATH79_MACH_GENERIC,
--	     "Generic",
--	     "Generic AR71XX/AR724X/AR913X based board",
--	     NULL);
--
--MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
--	     "DTB",
--	     "Generic AR71XX/AR724X/AR913X based board (DT)",
--	     NULL);
diff --git a/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch b/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch
deleted file mode 100644
index 254f2f9253..0000000000
--- a/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch
+++ /dev/null
@@ -1,379 +0,0 @@
-From d0f1420702ed47a82572aaf39e7407055518d14e Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:05:19 +0200
-Subject: [PATCH 29/33] MIPS: ath79: drop legacy pci code
-
-With the target now being fully OF based, we can drop the legacy pci
-platform code. The only bits that we need to keep is the fixup code
-which we move to its own code file.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile    |   1 -
- arch/mips/ath79/pci.c       | 273 --------------------------------------------
- arch/mips/ath79/pci.h       |  35 ------
- arch/mips/pci/Makefile      |   1 +
- arch/mips/pci/fixup-ath79.c |  21 ++++
- 5 files changed, 22 insertions(+), 309 deletions(-)
- delete mode 100644 arch/mips/ath79/pci.c
- delete mode 100644 arch/mips/ath79/pci.h
- create mode 100644 arch/mips/pci/fixup-ath79.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,7 +11,6 @@
- obj-y	:= prom.o setup.o common.o clock.o
- 
- obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
--obj-$(CONFIG_PCI)			+= pci.o
- 
- #
- # Devices
---- a/arch/mips/ath79/pci.c
-+++ /dev/null
-@@ -1,273 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X specific PCI setup code
-- *
-- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/pci.h>
--#include <linux/resource.h>
--#include <linux/platform_device.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/irq.h>
--#include "pci.h"
--
--static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
--static const struct ath79_pci_irq *ath79_pci_irq_map;
--static unsigned ath79_pci_nr_irqs;
--
--static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
--	{
--		.slot	= 17,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(0),
--	}, {
--		.slot	= 18,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(1),
--	}, {
--		.slot	= 19,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(2),
--	}
--};
--
--static const struct ath79_pci_irq ar724x_pci_irq_map[] = {
--	{
--		.slot	= 0,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(0),
--	}
--};
--
--static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
--	{
--		.bus	= 0,
--		.slot	= 0,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(0),
--	},
--	{
--		.bus	= 1,
--		.slot	= 0,
--		.pin	= 1,
--		.irq	= ATH79_PCI_IRQ(1),
--	},
--};
--
--int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
--{
--	int irq = -1;
--	int i;
--
--	if (ath79_pci_nr_irqs == 0 ||
--	    ath79_pci_irq_map == NULL) {
--		if (soc_is_ar71xx()) {
--			ath79_pci_irq_map = ar71xx_pci_irq_map;
--			ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
--		} else if (soc_is_ar724x() ||
--			   soc_is_ar9342() ||
--			   soc_is_ar9344()) {
--			ath79_pci_irq_map = ar724x_pci_irq_map;
--			ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
--		} else if (soc_is_qca955x()) {
--			ath79_pci_irq_map = qca955x_pci_irq_map;
--			ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
--		} else {
--			pr_crit("pci %s: invalid irq map\n",
--				pci_name((struct pci_dev *) dev));
--			return irq;
--		}
--	}
--
--	for (i = 0; i < ath79_pci_nr_irqs; i++) {
--		const struct ath79_pci_irq *entry;
--
--		entry = &ath79_pci_irq_map[i];
--		if (entry->bus == dev->bus->number &&
--		    entry->slot == slot &&
--		    entry->pin == pin) {
--			irq = entry->irq;
--			break;
--		}
--	}
--
--	if (irq < 0)
--		pr_crit("pci %s: no irq found for pin %u\n",
--			pci_name((struct pci_dev *) dev), pin);
--	else
--		pr_info("pci %s: using irq %d for pin %u\n",
--			pci_name((struct pci_dev *) dev), irq, pin);
--
--	return irq;
--}
--
--int pcibios_plat_dev_init(struct pci_dev *dev)
--{
--	if (ath79_pci_plat_dev_init)
--		return ath79_pci_plat_dev_init(dev);
--
--	return 0;
--}
--
--void __init ath79_pci_set_irq_map(unsigned nr_irqs,
--				  const struct ath79_pci_irq *map)
--{
--	ath79_pci_nr_irqs = nr_irqs;
--	ath79_pci_irq_map = map;
--}
--
--void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
--{
--	ath79_pci_plat_dev_init = func;
--}
--
--static struct platform_device *
--ath79_register_pci_ar71xx(void)
--{
--	struct platform_device *pdev;
--	struct resource res[4];
--
--	memset(res, 0, sizeof(res));
--
--	res[0].name = "cfg_base";
--	res[0].flags = IORESOURCE_MEM;
--	res[0].start = AR71XX_PCI_CFG_BASE;
--	res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
--
--	res[1].flags = IORESOURCE_IRQ;
--	res[1].start = ATH79_CPU_IRQ(2);
--	res[1].end = ATH79_CPU_IRQ(2);
--
--	res[2].name = "io_base";
--	res[2].flags = IORESOURCE_IO;
--	res[2].start = 0;
--	res[2].end = 0;
--
--	res[3].name = "mem_base";
--	res[3].flags = IORESOURCE_MEM;
--	res[3].start = AR71XX_PCI_MEM_BASE;
--	res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
--
--	pdev = platform_device_register_simple("ar71xx-pci", -1,
--					       res, ARRAY_SIZE(res));
--	return pdev;
--}
--
--static struct platform_device *
--ath79_register_pci_ar724x(int id,
--			  unsigned long cfg_base,
--			  unsigned long ctrl_base,
--			  unsigned long crp_base,
--			  unsigned long mem_base,
--			  unsigned long mem_size,
--			  unsigned long io_base,
--			  int irq)
--{
--	struct platform_device *pdev;
--	struct resource res[6];
--
--	memset(res, 0, sizeof(res));
--
--	res[0].name = "cfg_base";
--	res[0].flags = IORESOURCE_MEM;
--	res[0].start = cfg_base;
--	res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
--
--	res[1].name = "ctrl_base";
--	res[1].flags = IORESOURCE_MEM;
--	res[1].start = ctrl_base;
--	res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
--
--	res[2].flags = IORESOURCE_IRQ;
--	res[2].start = irq;
--	res[2].end = irq;
--
--	res[3].name = "mem_base";
--	res[3].flags = IORESOURCE_MEM;
--	res[3].start = mem_base;
--	res[3].end = mem_base + mem_size - 1;
--
--	res[4].name = "io_base";
--	res[4].flags = IORESOURCE_IO;
--	res[4].start = io_base;
--	res[4].end = io_base;
--
--	res[5].name = "crp_base";
--	res[5].flags = IORESOURCE_MEM;
--	res[5].start = crp_base;
--	res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
--
--	pdev = platform_device_register_simple("ar724x-pci", id,
--					       res, ARRAY_SIZE(res));
--	return pdev;
--}
--
--int __init ath79_register_pci(void)
--{
--	struct platform_device *pdev = NULL;
--
--	if (soc_is_ar71xx()) {
--		pdev = ath79_register_pci_ar71xx();
--	} else if (soc_is_ar724x()) {
--		pdev = ath79_register_pci_ar724x(-1,
--						 AR724X_PCI_CFG_BASE,
--						 AR724X_PCI_CTRL_BASE,
--						 AR724X_PCI_CRP_BASE,
--						 AR724X_PCI_MEM_BASE,
--						 AR724X_PCI_MEM_SIZE,
--						 0,
--						 ATH79_CPU_IRQ(2));
--	} else if (soc_is_ar9342() ||
--		   soc_is_ar9344()) {
--		u32 bootstrap;
--
--		bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
--		if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
--			return -ENODEV;
--
--		pdev = ath79_register_pci_ar724x(-1,
--						 AR724X_PCI_CFG_BASE,
--						 AR724X_PCI_CTRL_BASE,
--						 AR724X_PCI_CRP_BASE,
--						 AR724X_PCI_MEM_BASE,
--						 AR724X_PCI_MEM_SIZE,
--						 0,
--						 ATH79_IP2_IRQ(0));
--	} else if (soc_is_qca9558()) {
--		pdev = ath79_register_pci_ar724x(0,
--						 QCA955X_PCI_CFG_BASE0,
--						 QCA955X_PCI_CTRL_BASE0,
--						 QCA955X_PCI_CRP_BASE0,
--						 QCA955X_PCI_MEM_BASE0,
--						 QCA955X_PCI_MEM_SIZE,
--						 0,
--						 ATH79_IP2_IRQ(0));
--
--		pdev = ath79_register_pci_ar724x(1,
--						 QCA955X_PCI_CFG_BASE1,
--						 QCA955X_PCI_CTRL_BASE1,
--						 QCA955X_PCI_CRP_BASE1,
--						 QCA955X_PCI_MEM_BASE1,
--						 QCA955X_PCI_MEM_SIZE,
--						 1,
--						 ATH79_IP3_IRQ(2));
--	} else {
--		/* No PCI support */
--		return -ENODEV;
--	}
--
--	if (!pdev)
--		pr_err("unable to register PCI controller device\n");
--
--	return pdev ? 0 : -ENODEV;
--}
---- a/arch/mips/ath79/pci.h
-+++ /dev/null
-@@ -1,35 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X PCI support
-- *
-- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_PCI_H
--#define _ATH79_PCI_H
--
--struct ath79_pci_irq {
--	int	bus;
--	u8	slot;
--	u8	pin;
--	int	irq;
--};
--
--#ifdef CONFIG_PCI
--void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
--void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
--int ath79_register_pci(void);
--#else
--static inline void
--ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
--static inline void
--ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
--static inline int ath79_register_pci(void) { return 0; }
--#endif
--
--#endif /* _ATH79_PCI_H */
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-vir
- #
- # These are still pretty much in the old state, watch, go blind.
- #
-+obj-$(CONFIG_ATH79)		+= fixup-ath79.o
- obj-$(CONFIG_LASAT)		+= pci-lasat.o
- obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
- obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-ath79.c
-@@ -0,0 +1,21 @@
-+/*
-+ *  Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+//#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	return of_irq_parse_and_map_pci(dev, slot, pin);
-+}
diff --git a/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch b/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch
deleted file mode 100644
index 93a133c1df..0000000000
--- a/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch
+++ /dev/null
@@ -1,933 +0,0 @@
-From dce930fba8ad3a90ccd164f199e57c2d61937ccd Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:12:38 +0200
-Subject: [PATCH 30/33] MIPS: ath79: drop platform device registration code
-
-With the target now being fully OF based, we can drop the legacy platform
-device registration code. All devices and their drivers are now probed
-via OF.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile           |  10 --
- arch/mips/ath79/common.h           |   2 -
- arch/mips/ath79/dev-common.c       | 159 ------------------------
- arch/mips/ath79/dev-common.h       |  18 ---
- arch/mips/ath79/dev-gpio-buttons.c |  56 ---------
- arch/mips/ath79/dev-gpio-buttons.h |  23 ----
- arch/mips/ath79/dev-leds-gpio.c    |  54 ---------
- arch/mips/ath79/dev-leds-gpio.h    |  21 ----
- arch/mips/ath79/dev-spi.c          |  38 ------
- arch/mips/ath79/dev-spi.h          |  22 ----
- arch/mips/ath79/dev-usb.c          | 242 -------------------------------------
- arch/mips/ath79/dev-usb.h          |  17 ---
- arch/mips/ath79/dev-wmac.c         | 155 ------------------------
- arch/mips/ath79/dev-wmac.h         |  17 ---
- arch/mips/ath79/setup.c            |   1 -
- 15 files changed, 835 deletions(-)
- delete mode 100644 arch/mips/ath79/dev-common.c
- delete mode 100644 arch/mips/ath79/dev-common.h
- delete mode 100644 arch/mips/ath79/dev-gpio-buttons.c
- delete mode 100644 arch/mips/ath79/dev-gpio-buttons.h
- delete mode 100644 arch/mips/ath79/dev-leds-gpio.c
- delete mode 100644 arch/mips/ath79/dev-leds-gpio.h
- delete mode 100644 arch/mips/ath79/dev-spi.c
- delete mode 100644 arch/mips/ath79/dev-spi.h
- delete mode 100644 arch/mips/ath79/dev-usb.c
- delete mode 100644 arch/mips/ath79/dev-usb.h
- delete mode 100644 arch/mips/ath79/dev-wmac.c
- delete mode 100644 arch/mips/ath79/dev-wmac.h
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,13 +11,3 @@
- obj-y	:= prom.o setup.o common.o clock.o
- 
- obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
--
--#
--# Devices
--#
--obj-y					+= dev-common.o
--obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
--obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev-leds-gpio.o
--obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
--obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
--obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -24,6 +24,4 @@ unsigned long ath79_get_sys_clk_rate(con
- 
- void ath79_ddr_ctrl_init(void);
- 
--void ath79_gpio_init(void);
--
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/dev-common.c
-+++ /dev/null
-@@ -1,159 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X common devices
-- *
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/platform_data/gpio-ath79.h>
--#include <linux/serial_8250.h>
--#include <linux/clk.h>
--#include <linux/err.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "dev-common.h"
--
--static struct resource ath79_uart_resources[] = {
--	{
--		.start	= AR71XX_UART_BASE,
--		.end	= AR71XX_UART_BASE + AR71XX_UART_SIZE - 1,
--		.flags	= IORESOURCE_MEM,
--	},
--};
--
--#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
--static struct plat_serial8250_port ath79_uart_data[] = {
--	{
--		.mapbase	= AR71XX_UART_BASE,
--		.irq		= ATH79_MISC_IRQ(3),
--		.flags		= AR71XX_UART_FLAGS,
--		.iotype		= UPIO_MEM32,
--		.regshift	= 2,
--	}, {
--		/* terminating entry */
--	}
--};
--
--static struct platform_device ath79_uart_device = {
--	.name		= "serial8250",
--	.id		= PLAT8250_DEV_PLATFORM,
--	.resource	= ath79_uart_resources,
--	.num_resources	= ARRAY_SIZE(ath79_uart_resources),
--	.dev = {
--		.platform_data	= ath79_uart_data
--	},
--};
--
--static struct resource ar933x_uart_resources[] = {
--	{
--		.start	= AR933X_UART_BASE,
--		.end	= AR933X_UART_BASE + AR71XX_UART_SIZE - 1,
--		.flags	= IORESOURCE_MEM,
--	},
--	{
--		.start	= ATH79_MISC_IRQ(3),
--		.end	= ATH79_MISC_IRQ(3),
--		.flags	= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device ar933x_uart_device = {
--	.name		= "ar933x-uart",
--	.id		= -1,
--	.resource	= ar933x_uart_resources,
--	.num_resources	= ARRAY_SIZE(ar933x_uart_resources),
--};
--
--void __init ath79_register_uart(void)
--{
--	unsigned long uart_clk_rate;
--
--	uart_clk_rate = ath79_get_sys_clk_rate("uart");
--
--	if (soc_is_ar71xx() ||
--	    soc_is_ar724x() ||
--	    soc_is_ar913x() ||
--	    soc_is_ar934x() ||
--	    soc_is_qca955x()) {
--		ath79_uart_data[0].uartclk = uart_clk_rate;
--		platform_device_register(&ath79_uart_device);
--	} else if (soc_is_ar933x()) {
--		platform_device_register(&ar933x_uart_device);
--	} else {
--		BUG();
--	}
--}
--
--void __init ath79_register_wdt(void)
--{
--	struct resource res;
--
--	memset(&res, 0, sizeof(res));
--
--	res.flags = IORESOURCE_MEM;
--	res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL;
--	res.end = res.start + 0x8 - 1;
--
--	platform_device_register_simple("ath79-wdt", -1, &res, 1);
--}
--
--static struct ath79_gpio_platform_data ath79_gpio_pdata;
--
--static struct resource ath79_gpio_resources[] = {
--	{
--		.flags = IORESOURCE_MEM,
--		.start = AR71XX_GPIO_BASE,
--		.end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1,
--	},
--	{
--		.start	= ATH79_MISC_IRQ(2),
--		.end	= ATH79_MISC_IRQ(2),
--		.flags	= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device ath79_gpio_device = {
--	.name		= "ath79-gpio",
--	.id		= -1,
--	.resource	= ath79_gpio_resources,
--	.num_resources	= ARRAY_SIZE(ath79_gpio_resources),
--	.dev = {
--		.platform_data	= &ath79_gpio_pdata
--	},
--};
--
--void __init ath79_gpio_init(void)
--{
--	if (soc_is_ar71xx()) {
--		ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT;
--	} else if (soc_is_ar7240()) {
--		ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT;
--	} else if (soc_is_ar7241() || soc_is_ar7242()) {
--		ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT;
--	} else if (soc_is_ar913x()) {
--		ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT;
--	} else if (soc_is_ar933x()) {
--		ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT;
--	} else if (soc_is_ar934x()) {
--		ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
--		ath79_gpio_pdata.oe_inverted = 1;
--	} else if (soc_is_qca955x()) {
--		ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
--		ath79_gpio_pdata.oe_inverted = 1;
--	} else {
--		BUG();
--	}
--
--	platform_device_register(&ath79_gpio_device);
--}
---- a/arch/mips/ath79/dev-common.h
-+++ /dev/null
-@@ -1,18 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X common devices
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_COMMON_H
--#define _ATH79_DEV_COMMON_H
--
--void ath79_register_uart(void);
--void ath79_register_wdt(void);
--
--#endif /* _ATH79_DEV_COMMON_H */
---- a/arch/mips/ath79/dev-gpio-buttons.c
-+++ /dev/null
-@@ -1,56 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X GPIO button support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include "linux/init.h"
--#include "linux/slab.h"
--#include <linux/platform_device.h>
--
--#include "dev-gpio-buttons.h"
--
--void __init ath79_register_gpio_keys_polled(int id,
--					    unsigned poll_interval,
--					    unsigned nbuttons,
--					    struct gpio_keys_button *buttons)
--{
--	struct platform_device *pdev;
--	struct gpio_keys_platform_data pdata;
--	struct gpio_keys_button *p;
--	int err;
--
--	p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
--	if (!p)
--		return;
--
--	pdev = platform_device_alloc("gpio-keys-polled", id);
--	if (!pdev)
--		goto err_free_buttons;
--
--	memset(&pdata, 0, sizeof(pdata));
--	pdata.poll_interval = poll_interval;
--	pdata.nbuttons = nbuttons;
--	pdata.buttons = p;
--
--	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
--	if (err)
--		goto err_put_pdev;
--
--	err = platform_device_add(pdev);
--	if (err)
--		goto err_put_pdev;
--
--	return;
--
--err_put_pdev:
--	platform_device_put(pdev);
--
--err_free_buttons:
--	kfree(p);
--}
---- a/arch/mips/ath79/dev-gpio-buttons.h
-+++ /dev/null
-@@ -1,23 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X GPIO button support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_GPIO_BUTTONS_H
--#define _ATH79_DEV_GPIO_BUTTONS_H
--
--#include <linux/input.h>
--#include <linux/gpio_keys.h>
--
--void ath79_register_gpio_keys_polled(int id,
--				     unsigned poll_interval,
--				     unsigned nbuttons,
--				     struct gpio_keys_button *buttons);
--
--#endif /* _ATH79_DEV_GPIO_BUTTONS_H */
---- a/arch/mips/ath79/dev-leds-gpio.c
-+++ /dev/null
-@@ -1,54 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/slab.h>
--#include <linux/platform_device.h>
--
--#include "dev-leds-gpio.h"
--
--void __init ath79_register_leds_gpio(int id,
--				     unsigned num_leds,
--				     struct gpio_led *leds)
--{
--	struct platform_device *pdev;
--	struct gpio_led_platform_data pdata;
--	struct gpio_led *p;
--	int err;
--
--	p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL);
--	if (!p)
--		return;
--
--	pdev = platform_device_alloc("leds-gpio", id);
--	if (!pdev)
--		goto err_free_leds;
--
--	memset(&pdata, 0, sizeof(pdata));
--	pdata.num_leds = num_leds;
--	pdata.leds = p;
--
--	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
--	if (err)
--		goto err_put_pdev;
--
--	err = platform_device_add(pdev);
--	if (err)
--		goto err_put_pdev;
--
--	return;
--
--err_put_pdev:
--	platform_device_put(pdev);
--
--err_free_leds:
--	kfree(p);
--}
---- a/arch/mips/ath79/dev-leds-gpio.h
-+++ /dev/null
-@@ -1,21 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_LEDS_GPIO_H
--#define _ATH79_DEV_LEDS_GPIO_H
--
--#include <linux/leds.h>
--
--void ath79_register_leds_gpio(int id,
--			      unsigned num_leds,
--			      struct gpio_led *leds);
--
--#endif /* _ATH79_DEV_LEDS_GPIO_H */
---- a/arch/mips/ath79/dev-spi.c
-+++ /dev/null
-@@ -1,38 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X SPI controller device
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/platform_device.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "dev-spi.h"
--
--static struct resource ath79_spi_resources[] = {
--	{
--		.start	= AR71XX_SPI_BASE,
--		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
--		.flags	= IORESOURCE_MEM,
--	},
--};
--
--static struct platform_device ath79_spi_device = {
--	.name		= "ath79-spi",
--	.id		= -1,
--	.resource	= ath79_spi_resources,
--	.num_resources	= ARRAY_SIZE(ath79_spi_resources),
--};
--
--void __init ath79_register_spi(struct ath79_spi_platform_data *pdata,
--			       struct spi_board_info const *info,
--			       unsigned n)
--{
--	spi_register_board_info(info, n);
--	ath79_spi_device.dev.platform_data = pdata;
--	platform_device_register(&ath79_spi_device);
--}
---- a/arch/mips/ath79/dev-spi.h
-+++ /dev/null
-@@ -1,22 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X SPI controller device
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_SPI_H
--#define _ATH79_DEV_SPI_H
--
--#include <linux/spi/spi.h>
--#include <asm/mach-ath79/ath79_spi_platform.h>
--
--void ath79_register_spi(struct ath79_spi_platform_data *pdata,
--			 struct spi_board_info const *info,
--			 unsigned n);
--
--#endif /* _ATH79_DEV_SPI_H */
---- a/arch/mips/ath79/dev-usb.c
-+++ /dev/null
-@@ -1,242 +0,0 @@
--/*
-- *  Atheros AR7XXX/AR9XXX USB Host Controller device
-- *
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/delay.h>
--#include <linux/irq.h>
--#include <linux/dma-mapping.h>
--#include <linux/platform_device.h>
--#include <linux/usb/ehci_pdriver.h>
--#include <linux/usb/ohci_pdriver.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "dev-usb.h"
--
--static u64 ath79_usb_dmamask = DMA_BIT_MASK(32);
--
--static struct usb_ohci_pdata ath79_ohci_pdata = {
--};
--
--static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
--	.has_synopsys_hc_bug	= 1,
--};
--
--static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
--	.caps_offset		= 0x100,
--	.has_tt			= 1,
--};
--
--static void __init ath79_usb_register(const char *name, int id,
--				      unsigned long base, unsigned long size,
--				      int irq, const void *data,
--				      size_t data_size)
--{
--	struct resource res[2];
--	struct platform_device *pdev;
--
--	memset(res, 0, sizeof(res));
--
--	res[0].flags = IORESOURCE_MEM;
--	res[0].start = base;
--	res[0].end = base + size - 1;
--
--	res[1].flags = IORESOURCE_IRQ;
--	res[1].start = irq;
--	res[1].end = irq;
--
--	pdev = platform_device_register_resndata(NULL, name, id,
--						 res, ARRAY_SIZE(res),
--						 data, data_size);
--
--	if (IS_ERR(pdev)) {
--		pr_err("ath79: unable to register USB at %08lx, err=%d\n",
--		       base, (int) PTR_ERR(pdev));
--		return;
--	}
--
--	pdev->dev.dma_mask = &ath79_usb_dmamask;
--	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
--}
--
--#define AR71XX_USB_RESET_MASK	(AR71XX_RESET_USB_HOST | \
--				 AR71XX_RESET_USB_PHY | \
--				 AR71XX_RESET_USB_OHCI_DLL)
--
--static void __init ath79_usb_setup(void)
--{
--	void __iomem *usb_ctrl_base;
--
--	ath79_device_reset_set(AR71XX_USB_RESET_MASK);
--	mdelay(1000);
--	ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
--
--	usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
--
--	/* Turning on the Buff and Desc swap bits */
--	__raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
--
--	/* WAR for HW bug. Here it adjusts the duration between two SOFS */
--	__raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
--
--	iounmap(usb_ctrl_base);
--
--	mdelay(900);
--
--	ath79_usb_register("ohci-platform", -1,
--			   AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE,
--			   ATH79_MISC_IRQ(6),
--			   &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1));
--}
--
--static void __init ar7240_usb_setup(void)
--{
--	void __iomem *usb_ctrl_base;
--
--	ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
--	ath79_device_reset_set(AR7240_RESET_USB_HOST);
--
--	mdelay(1000);
--
--	ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
--	ath79_device_reset_clear(AR7240_RESET_USB_HOST);
--
--	usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
--
--	/* WAR for HW bug. Here it adjusts the duration between two SOFS */
--	__raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
--
--	iounmap(usb_ctrl_base);
--
--	ath79_usb_register("ohci-platform", -1,
--			   AR7240_OHCI_BASE, AR7240_OHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
--}
--
--static void __init ar724x_usb_setup(void)
--{
--	ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR724X_RESET_USB_HOST);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR724X_RESET_USB_PHY);
--	mdelay(10);
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR724X_EHCI_BASE, AR724X_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar913x_usb_setup(void)
--{
--	ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR913X_RESET_USB_HOST);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR913X_RESET_USB_PHY);
--	mdelay(10);
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar933x_usb_setup(void)
--{
--	ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR933X_RESET_USB_HOST);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR933X_RESET_USB_PHY);
--	mdelay(10);
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar934x_usb_setup(void)
--{
--	u32 bootstrap;
--
--	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
--	if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
--		return;
--
--	ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
--	udelay(1000);
--
--	ath79_device_reset_clear(AR934X_RESET_USB_PHY);
--	udelay(1000);
--
--	ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
--	udelay(1000);
--
--	ath79_device_reset_clear(AR934X_RESET_USB_HOST);
--	udelay(1000);
--
--	ath79_usb_register("ehci-platform", -1,
--			   AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
--			   ATH79_CPU_IRQ(3),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init qca955x_usb_setup(void)
--{
--	ath79_usb_register("ehci-platform", 0,
--			   QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
--			   ATH79_IP3_IRQ(0),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--
--	ath79_usb_register("ehci-platform", 1,
--			   QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
--			   ATH79_IP3_IRQ(1),
--			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--void __init ath79_register_usb(void)
--{
--	if (soc_is_ar71xx())
--		ath79_usb_setup();
--	else if (soc_is_ar7240())
--		ar7240_usb_setup();
--	else if (soc_is_ar7241() || soc_is_ar7242())
--		ar724x_usb_setup();
--	else if (soc_is_ar913x())
--		ar913x_usb_setup();
--	else if (soc_is_ar933x())
--		ar933x_usb_setup();
--	else if (soc_is_ar934x())
--		ar934x_usb_setup();
--	else if (soc_is_qca955x())
--		qca955x_usb_setup();
--	else
--		BUG();
--}
---- a/arch/mips/ath79/dev-usb.h
-+++ /dev/null
-@@ -1,17 +0,0 @@
--/*
-- *  Atheros AR71XX/AR724X/AR913X USB Host Controller support
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_USB_H
--#define _ATH79_DEV_USB_H
--
--void ath79_register_usb(void);
--
--#endif /* _ATH79_DEV_USB_H */
---- a/arch/mips/ath79/dev-wmac.c
-+++ /dev/null
-@@ -1,155 +0,0 @@
--/*
-- *  Atheros AR913X/AR933X SoC built-in WMAC device support
-- *
-- *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/delay.h>
--#include <linux/irq.h>
--#include <linux/platform_device.h>
--#include <linux/ath9k_platform.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "dev-wmac.h"
--
--static struct ath9k_platform_data ath79_wmac_data;
--
--static struct resource ath79_wmac_resources[] = {
--	{
--		/* .start and .end fields are filled dynamically */
--		.flags	= IORESOURCE_MEM,
--	}, {
--		/* .start and .end fields are filled dynamically */
--		.flags	= IORESOURCE_IRQ,
--	},
--};
--
--static struct platform_device ath79_wmac_device = {
--	.name		= "ath9k",
--	.id		= -1,
--	.resource	= ath79_wmac_resources,
--	.num_resources	= ARRAY_SIZE(ath79_wmac_resources),
--	.dev = {
--		.platform_data = &ath79_wmac_data,
--	},
--};
--
--static void __init ar913x_wmac_setup(void)
--{
--	/* reset the WMAC */
--	ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
--	mdelay(10);
--
--	ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
--	mdelay(10);
--
--	ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
--	ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
--	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
--	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
--}
--
--
--static int ar933x_wmac_reset(void)
--{
--	ath79_device_reset_set(AR933X_RESET_WMAC);
--	ath79_device_reset_clear(AR933X_RESET_WMAC);
--
--	return 0;
--}
--
--static int ar933x_r1_get_wmac_revision(void)
--{
--	return ath79_soc_rev;
--}
--
--static void __init ar933x_wmac_setup(void)
--{
--	u32 t;
--
--	ar933x_wmac_reset();
--
--	ath79_wmac_device.name = "ar933x_wmac";
--
--	ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
--	ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
--	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
--	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
--
--	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
--	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
--		ath79_wmac_data.is_clk_25mhz = false;
--	else
--		ath79_wmac_data.is_clk_25mhz = true;
--
--	if (ath79_soc_rev == 1)
--		ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
--
--	ath79_wmac_data.external_reset = ar933x_wmac_reset;
--}
--
--static void ar934x_wmac_setup(void)
--{
--	u32 t;
--
--	ath79_wmac_device.name = "ar934x_wmac";
--
--	ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
--	ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
--	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
--	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
--
--	t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
--	if (t & AR934X_BOOTSTRAP_REF_CLK_40)
--		ath79_wmac_data.is_clk_25mhz = false;
--	else
--		ath79_wmac_data.is_clk_25mhz = true;
--}
--
--static void qca955x_wmac_setup(void)
--{
--	u32 t;
--
--	ath79_wmac_device.name = "qca955x_wmac";
--
--	ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
--	ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
--	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
--	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
--
--	t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
--	if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
--		ath79_wmac_data.is_clk_25mhz = false;
--	else
--		ath79_wmac_data.is_clk_25mhz = true;
--}
--
--void __init ath79_register_wmac(u8 *cal_data)
--{
--	if (soc_is_ar913x())
--		ar913x_wmac_setup();
--	else if (soc_is_ar933x())
--		ar933x_wmac_setup();
--	else if (soc_is_ar934x())
--		ar934x_wmac_setup();
--	else if (soc_is_qca955x())
--		qca955x_wmac_setup();
--	else
--		BUG();
--
--	if (cal_data)
--		memcpy(ath79_wmac_data.eeprom_data, cal_data,
--		       sizeof(ath79_wmac_data.eeprom_data));
--
--	platform_device_register(&ath79_wmac_device);
--}
---- a/arch/mips/ath79/dev-wmac.h
-+++ /dev/null
-@@ -1,17 +0,0 @@
--/*
-- *  Atheros AR913X/AR933X SoC built-in WMAC device support
-- *
-- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_WMAC_H
--#define _ATH79_DEV_WMAC_H
--
--void ath79_register_wmac(u8 *cal_data);
--
--#endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -32,7 +32,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "dev-common.h"
- 
- #define ATH79_SYS_TYPE_LEN	64
- 
diff --git a/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch b/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch
deleted file mode 100644
index a11be73d7a..0000000000
--- a/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 00e4313da4609074fff134e61dd9ffe3fd37474d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sun, 24 Jun 2018 09:39:41 +0200
-Subject: [PATCH 31/33] MIPS: ath79: drop !OF clock code
-
-With the target now being fully OF based, we can drop the legacy clock
-registration code. All clocks are now probed via devicetree.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c  | 56 ------------------------------------------------
- arch/mips/ath79/common.h |  3 ---
- 2 files changed, 59 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -617,60 +617,6 @@ static void __init qca956x_clocks_init(v
- 	ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
- 
--void __init ath79_clocks_init(void)
--{
--	const char *wdt;
--	const char *uart;
--
--	if (soc_is_ar71xx())
--		ar71xx_clocks_init(ath79_pll_base);
--	else if (soc_is_ar724x() || soc_is_ar913x())
--		ar724x_clocks_init(ath79_pll_base);
--	else if (soc_is_ar933x())
--		ar933x_clocks_init(ath79_pll_base);
--	else if (soc_is_ar934x())
--		ar934x_clocks_init(ath79_pll_base);
--	else if (soc_is_qca953x())
--		qca953x_clocks_init(ath79_pll_base);
--	else if (soc_is_qca955x())
--		qca955x_clocks_init(ath79_pll_base);
--	else if (soc_is_qca956x() || soc_is_tp9343())
--		qca956x_clocks_init(ath79_pll_base);
--	else
--		BUG();
--
--	if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
--		wdt = "ahb";
--		uart = "ahb";
--	} else if (soc_is_ar933x()) {
--		wdt = "ahb";
--		uart = "ref";
--	} else {
--		wdt = "ref";
--		uart = "ref";
--	}
--
--	clk_add_alias("wdt", NULL, wdt, NULL);
--	clk_add_alias("uart", NULL, uart, NULL);
--}
--
--unsigned long __init
--ath79_get_sys_clk_rate(const char *id)
--{
--	struct clk *clk;
--	unsigned long rate;
--
--	clk = clk_get(NULL, id);
--	if (IS_ERR(clk))
--		panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk));
--
--	rate = clk_get_rate(clk);
--	clk_put(clk);
--
--	return rate;
--}
--
--#ifdef CONFIG_OF
- static void __init ath79_clocks_init_dt(struct device_node *np)
- {
- 	struct clk *ref_clk;
-@@ -727,5 +673,3 @@ CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-p
- CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
- CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
- CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
--
--#endif
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -19,9 +19,6 @@
- #define ATH79_MEM_SIZE_MIN	(2 * 1024 * 1024)
- #define ATH79_MEM_SIZE_MAX	(256 * 1024 * 1024)
- 
--void ath79_clocks_init(void);
--unsigned long ath79_get_sys_clk_rate(const char *id);
--
- void ath79_ddr_ctrl_init(void);
- 
- #endif /* __ATH79_COMMON_H */
diff --git a/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch
deleted file mode 100644
index 1c38139323..0000000000
--- a/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:16:55 +0200
-Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
-
-We no longer need to select which SoCs are supported as the whole arch
-code is always built. So lets drop all the SoC symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig       |  2 ++
- arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
- arch/mips/pci/Makefile  |  2 +-
- 3 files changed, 8 insertions(+), 40 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -208,6 +208,8 @@ config ATH79
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select SYS_SUPPORTS_MIPS16
- 	select SYS_SUPPORTS_ZBOOT_UART_PROM
-+	select HW_HAS_PCI
-+	select USB_ARCH_HAS_EHCI
- 	select USE_OF
- 	select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
- 	help
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,48 +1,14 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
- 
--config SOC_AR71XX
--	select HW_HAS_PCI
--	def_bool n
--
--config SOC_AR724X
--	select HW_HAS_PCI
--	select PCI_AR724X if PCI
--	def_bool n
--
--config SOC_AR913X
--	def_bool n
--
--config SOC_AR933X
--	def_bool n
--
--config SOC_AR934X
--	select HW_HAS_PCI
--	select PCI_AR724X if PCI
--	def_bool n
--
--config SOC_QCA955X
--	select HW_HAS_PCI
--	select PCI_AR724X if PCI
-+config PCI_AR71XX
-+	bool "PCI support for AR7100 type SoCs"
-+	depends on PCI
- 	def_bool n
- 
- config PCI_AR724X
--	def_bool n
--
--config ATH79_DEV_GPIO_BUTTONS
--	def_bool n
--
--config ATH79_DEV_LEDS_GPIO
--	def_bool n
--
--config ATH79_DEV_SPI
--	def_bool n
--
--config ATH79_DEV_USB
--	def_bool n
--
--config ATH79_DEV_WMAC
--	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+	bool "PCI support for AR724x type SoCs"
-+	depends on PCI
- 	def_bool n
- 
- endif
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o
- 					ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
- obj-$(CONFIG_PCI_AR2315)	+= pci-ar2315.o
--obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
-+obj-$(CONFIG_PCI_AR71XX)	+= pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
- obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-virtio-guest.o
- #
diff --git a/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch b/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch
deleted file mode 100644
index aeb50c9b1c..0000000000
--- a/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From c4e197bbcecc7233aa9e553e7047fa50e4e1fe77 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:34 +0200
-Subject: [PATCH 33/33] spi: ath79: drop pdata support
-
-The target is being converted to pure OF. We can therefore drop all of the
-platform data code from the driver.
-
-Cc: linux-spi@vger.kernel.org
-Acked-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/include/asm/mach-ath79/ath79_spi_platform.h | 19 -------------------
- drivers/spi/spi-ath79.c                               |  8 --------
- 2 files changed, 27 deletions(-)
- delete mode 100644 arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ /dev/null
-@@ -1,19 +0,0 @@
--/*
-- *  Platform data definition for Atheros AR71XX/AR724X/AR913X SPI controller
-- *
-- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_SPI_PLATFORM_H
--#define _ATH79_SPI_PLATFORM_H
--
--struct ath79_spi_platform_data {
--	unsigned	bus_num;
--	unsigned	num_chipselect;
--};
--
--#endif /* _ATH79_SPI_PLATFORM_H */
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -26,7 +26,6 @@
- #include <linux/err.h>
- 
- #include <asm/mach-ath79/ar71xx_regs.h>
--#include <asm/mach-ath79/ath79_spi_platform.h>
- 
- #define DRV_NAME	"ath79-spi"
- 
-@@ -208,7 +207,6 @@ static int ath79_spi_probe(struct platfo
- {
- 	struct spi_master *master;
- 	struct ath79_spi *sp;
--	struct ath79_spi_platform_data *pdata;
- 	struct resource	*r;
- 	unsigned long rate;
- 	int ret;
-@@ -223,15 +221,9 @@ static int ath79_spi_probe(struct platfo
- 	master->dev.of_node = pdev->dev.of_node;
- 	platform_set_drvdata(pdev, sp);
- 
--	pdata = dev_get_platdata(&pdev->dev);
--
- 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
- 	master->setup = ath79_spi_setup;
- 	master->cleanup = ath79_spi_cleanup;
--	if (pdata) {
--		master->bus_num = pdata->bus_num;
--		master->num_chipselect = pdata->num_chipselect;
--	}
- 
- 	sp->bitbang.master = master;
- 	sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch b/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch
deleted file mode 100644
index 6eec142c74..0000000000
--- a/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -34,11 +34,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq);
- 
- enum ath79_soc_type ath79_soc;
- unsigned int ath79_soc_rev;
-+EXPORT_SYMBOL_GPL(ath79_soc_rev);
- 
- void __iomem *ath79_pll_base;
- void __iomem *ath79_reset_base;
- EXPORT_SYMBOL_GPL(ath79_reset_base);
--static void __iomem *ath79_ddr_base;
-+void __iomem *ath79_ddr_base;
-+EXPORT_SYMBOL_GPL(ath79_ddr_base);
- static void __iomem *ath79_ddr_wb_flush_base;
- static void __iomem *ath79_ddr_pci_win_base;
- 
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -152,6 +152,7 @@ void ath79_ddr_wb_flush(unsigned int reg
- void ath79_ddr_set_pci_windows(void);
- 
- extern void __iomem *ath79_pll_base;
-+extern void __iomem *ath79_ddr_base;
- extern void __iomem *ath79_reset_base;
- 
- static inline void ath79_pll_wr(unsigned reg, u32 val)
diff --git a/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch b/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index b3aa9fcc01..0000000000
--- a/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 24/53] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c     |   68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib-sysfs.c  |   10 +++++-
- include/asm-generic/gpio.h    |    6 ++++
- include/linux/gpio/consumer.h |    8 +++++
- 4 files changed, 91 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
- 
- #include "gpiolib.h"
- 
-@@ -660,3 +662,68 @@ void of_gpiochip_remove(struct gpio_chip
- 	gpiochip_remove_pin_ranges(chip);
- 	of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+	{ .compatible = "gpio-export" },
-+	{ /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *cnp;
-+	u32 val;
-+	int nb = 0;
-+
-+	for_each_child_of_node(np, cnp) {
-+		const char *name = NULL;
-+		int gpio;
-+		bool dmc;
-+		int max_gpio = 1;
-+		int i;
-+
-+		of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+		if (!name)
-+			max_gpio = of_gpio_count(cnp);
-+
-+		for (i = 0; i < max_gpio; i++) {
-+			unsigned flags = 0;
-+			enum of_gpio_flags of_flags;
-+
-+			gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+			if (!gpio_is_valid(gpio))
-+				return gpio;
-+
-+			if (of_flags == OF_GPIO_ACTIVE_LOW)
-+				flags |= GPIOF_ACTIVE_LOW;
-+
-+			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+			else
-+				flags |= GPIOF_IN;
-+
-+			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+				continue;
-+
-+			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+			gpio_export_with_name(gpio, dmc, name);
-+			nb++;
-+		}
-+	}
-+
-+	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+	.driver		= {
-+		.name		= "gpio-export",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(gpio_export_ids),
-+	},
-+	.probe		= of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -568,7 +568,7 @@ static struct class gpio_class = {
-  *
-  * Returns zero on success, else an error.
-  */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- 	struct gpio_chip	*chip;
- 	struct gpio_device	*gdev;
-@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc,
- 	offset = gpio_chip_hwgpio(desc);
- 	if (chip->names && chip->names[offset])
- 		ioname = chip->names[offset];
-+	if (name)
-+		ioname = name;
- 
- 	dev = device_create_with_groups(&gpio_class, &gdev->dev,
- 					MKDEV(0, 0), data, gpio_groups,
-@@ -651,6 +653,12 @@ err_unlock:
- 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- 	return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+	return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
- 
- static int match_export(struct device *dev, const void *desc)
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
- 
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- 				   unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -533,6 +533,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
- 
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
- 
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- 		      struct gpio_desc *desc);
-@@ -540,6 +541,13 @@ void gpiod_unexport(struct gpio_desc *de
- 
- #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
- 
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+			       bool direction_may_change,
-+			       const char *name)
-+{
-+	return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- 			       bool direction_may_change)
- {
diff --git a/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch b/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch
deleted file mode 100644
index 460c4580ee..0000000000
--- a/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch
+++ /dev/null
@@ -1,139 +0,0 @@
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -54,11 +54,9 @@
- struct ar71xx_pci_controller {
- 	struct device_node *np;
- 	void __iomem *cfg_base;
--	int irq;
- 	struct pci_controller pci_ctrl;
- 	struct resource io_res;
- 	struct resource mem_res;
--	struct irq_domain *domain;
- };
- 
- /* Byte lane enable bits */
-@@ -230,104 +228,6 @@ static struct pci_ops ar71xx_pci_ops = {
- 	.write	= ar71xx_pci_write_config,
- };
- 
--static void ar71xx_pci_irq_handler(struct irq_desc *desc)
--{
--	void __iomem *base = ath79_reset_base;
--	struct irq_chip *chip = irq_desc_get_chip(desc);
--	struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
--	u32 pending;
--
--	chained_irq_enter(chip, desc);
--	pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
--		  __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	if (pending & AR71XX_PCI_INT_DEV0)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 1));
--
--	else if (pending & AR71XX_PCI_INT_DEV1)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 2));
--
--	else if (pending & AR71XX_PCI_INT_DEV2)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 3));
--
--	else if (pending & AR71XX_PCI_INT_CORE)
--		generic_handle_irq(irq_linear_revmap(apc->domain, 4));
--
--	else
--		spurious_interrupt();
--	chained_irq_exit(chip, desc);
--}
--
--static void ar71xx_pci_irq_unmask(struct irq_data *d)
--{
--	struct ar71xx_pci_controller *apc;
--	unsigned int irq;
--	void __iomem *base = ath79_reset_base;
--	u32 t;
--
--	apc = irq_data_get_irq_chip_data(d);
--	irq = irq_linear_revmap(apc->domain, d->irq);
--
--	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	/* flush write */
--	__raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static void ar71xx_pci_irq_mask(struct irq_data *d)
--{
--	struct ar71xx_pci_controller *apc;
--	unsigned int irq;
--	void __iomem *base = ath79_reset_base;
--	u32 t;
--
--	apc = irq_data_get_irq_chip_data(d);
--	irq = irq_linear_revmap(apc->domain, d->irq);
--
--	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
--	/* flush write */
--	__raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static struct irq_chip ar71xx_pci_irq_chip = {
--	.name		= "AR71XX PCI",
--	.irq_mask	= ar71xx_pci_irq_mask,
--	.irq_unmask	= ar71xx_pci_irq_unmask,
--	.irq_mask_ack	= ar71xx_pci_irq_mask,
--};
--
--static int ar71xx_pci_irq_map(struct irq_domain *d,
--			      unsigned int irq, irq_hw_number_t hw)
--{
--	struct ar71xx_pci_controller *apc = d->host_data;
--
--	irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
--	irq_set_chip_data(irq, apc);
--
--	return 0;
--}
--
--static const struct irq_domain_ops ar71xx_pci_domain_ops = {
--	.xlate = irq_domain_xlate_onecell,
--	.map = ar71xx_pci_irq_map,
--};
--
--static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
--{
--	void __iomem *base = ath79_reset_base;
--
--	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
--
--	apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
--					    &ar71xx_pci_domain_ops, apc);
--	irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
--					 apc);
--}
--
- static void ar71xx_pci_reset(void)
- {
- 	ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
-@@ -361,10 +261,6 @@ static int ar71xx_pci_probe(struct platf
- 	if (IS_ERR(apc->cfg_base))
- 		return PTR_ERR(apc->cfg_base);
- 
--	apc->irq = platform_get_irq(pdev, 0);
--	if (apc->irq < 0)
--		return -EINVAL;
--
- 	ar71xx_pci_reset();
- 
- 	/* setup COMMAND register */
-@@ -375,8 +271,6 @@ static int ar71xx_pci_probe(struct platf
- 	/* clear bus errors */
- 	ar71xx_pci_check_error(apc, 1);
- 
--	ar71xx_pci_irq_init(apc);
--
- 	apc->np = pdev->dev.of_node;
- 	apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- 	apc->pci_ctrl.mem_resource = &apc->mem_res;
diff --git a/target/linux/ath79/patches-4.19/0037-missing-registers.patch b/target/linux/ath79/patches-4.19/0037-missing-registers.patch
deleted file mode 100644
index 9fde3d39df..0000000000
--- a/target/linux/ath79/patches-4.19/0037-missing-registers.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-commit f3ffac90bc7266b7d917616f3233f58e8c08a196
-Author: Christian Lamparter <chunkeey@gmail.com>
-Date:   Fri Aug 10 23:24:47 2018 +0200
-
-    ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344
-
-    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1229,6 +1229,10 @@
- #define AR934X_ETH_CFG_RDV_DELAY        BIT(16)
- #define AR934X_ETH_CFG_RDV_DELAY_MASK   0x3
- #define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
-+#define AR934X_ETH_CFG_TXD_DELAY_MASK   0x3
-+#define AR934X_ETH_CFG_TXD_DELAY_SHIFT  18
-+#define AR934X_ETH_CFG_TXE_DELAY_MASK   0x3
-+#define AR934X_ETH_CFG_TXE_DELAY_SHIFT  20
- 
- /*
-  * QCA953X GMAC Interface
diff --git a/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch
deleted file mode 100644
index 78899c45e3..0000000000
--- a/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-HACK: register the GPIO driver earlier to ensure that gpio_request calls
-from mach files succeed.
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -325,7 +325,11 @@ static struct platform_driver ath79_gpio
- 	.remove = ath79_gpio_remove,
- };
- 
--module_platform_driver(ath79_gpio_driver);
-+static int __init ath79_gpio_init(void)
-+{
-+	return platform_driver_register(&ath79_gpio_driver);
-+}
-+postcore_initcall(ath79_gpio_init);
- 
- MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
- MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch
deleted file mode 100644
index eeda620957..0000000000
--- a/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1634,8 +1634,8 @@ static int __xipram do_write_oneword(str
- 			break;
- 		}
- 
--		if (chip_ready(map, adr))
--			break;
-+		if (chip_good(map, adr, datum))
-+			goto enable_xip;
- 
- 		/* Latency issues. Drop the lock, wait a while and retry */
- 		UDELAY(map, chip, adr, 1);
-@@ -1651,6 +1651,8 @@ static int __xipram do_write_oneword(str
- 
- 		ret = -EIO;
- 	}
-+
-+ enable_xip:
- 	xip_enable(map, chip, adr);
-  op_done:
- 	if (mode == FL_OTP_WRITE)
-@@ -2229,7 +2231,6 @@ static int cfi_amdstd_panic_write(struct
- 	return 0;
- }
- 
--
- /*
-  * Handle devices with one erase region, that only implement
-  * the chip erase command.
-@@ -2297,7 +2298,7 @@ static int __xipram do_erase_chip(struct
- 		}
- 
- 		if (chip_good(map, adr, map_word_ff(map)))
--			break;
-+			goto op_done;
- 
- 		if (time_after(jiffies, timeo)) {
- 			printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -2321,6 +2322,7 @@ static int __xipram do_erase_chip(struct
- 		}
- 	}
- 
-+ op_done:
- 	chip->state = FL_READY;
- 	xip_enable(map, chip, adr);
- 	DISABLE_VPP(map);
-@@ -2393,7 +2395,7 @@ static int __xipram do_erase_oneblock(st
- 		}
- 
- 		if (chip_good(map, adr, map_word_ff(map)))
--			break;
-+			goto op_done;
- 
- 		if (time_after(jiffies, timeo)) {
- 			printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -2417,6 +2419,7 @@ static int __xipram do_erase_oneblock(st
- 		}
- 	}
- 
-+ op_done:
- 	chip->state = FL_READY;
- 	xip_enable(map, chip, adr);
- 	DISABLE_VPP(map);
diff --git a/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch b/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch
deleted file mode 100644
index 22e31db3fa..0000000000
--- a/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -1,2 +1,3 @@
-+obj-$(CONFIG_MTD_PARSER_CYBERTAN)	+= parser_cybertan.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -1,3 +1,11 @@
-+config MTD_PARSER_CYBERTAN
-+	tristate "Parser for Cybertan format partitions"
-+	depends on MTD && (ATH79 || COMPILE_TEST)
-+	help
-+	  Cybertan has a proprietory header than encompasses a Broadcom trx
-+	  header. This driver will parse the header and take care of the
-+	  special offsets that result in the extra headers.
-+
- config MTD_PARSER_TRX
- 	tristate "Parser for TRX format partitions"
- 	depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
diff --git a/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch b/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch
deleted file mode 100644
index 16fe5ed272..0000000000
--- a/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -193,6 +193,12 @@ config MTD_MYLOADER_PARTS
- 	  You will still need the parsing functions to be called by the driver
- 	  for your particular device. It won't happen automatically.
- 
-+config MTD_TPLINK_PARTS
-+	tristate "TP-Link AR7XXX/AR9XXX partitioning support"
-+	depends on ATH79
-+	---help---
-+	  TBD.
-+
- comment "User Modules And Translation Layers"
- 
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63
- obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y				+= parsers/
-+obj-$(CONFIG_MTD_TPLINK_PARTS)	+= tplinkpart.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
diff --git a/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch b/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch
deleted file mode 100644
index 6377db0ac2..0000000000
--- a/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -5,7 +5,7 @@
- config NET_VENDOR_ATHEROS
- 	bool "Atheros devices"
- 	default y
--	depends on PCI
-+	depends on (PCI || ATH79)
- 	---help---
- 	  If you have a network (Ethernet) card belonging to this class, say Y.
- 
-@@ -78,4 +78,6 @@ config ALX
- 	  To compile this driver as a module, choose M here.  The module
- 	  will be called alx.
- 
-+source drivers/net/ethernet/atheros/ag71xx/Kconfig
-+
- endif # NET_VENDOR_ATHEROS
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -3,6 +3,7 @@
- # Makefile for the Atheros network device drivers.
- #
- 
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch
deleted file mode 100644
index 4c6558db90..0000000000
--- a/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -80,8 +80,8 @@ obj-y				+= scsi/
- obj-y				+= nvme/
- obj-$(CONFIG_ATA)		+= ata/
- obj-$(CONFIG_TARGET_CORE)	+= target/
--obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPI)		+= spi/
-+obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPMI)		+= spmi/
- obj-$(CONFIG_HSI)		+= hsi/
- obj-$(CONFIG_SLIMBUS)		+= slimbus/
diff --git a/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
deleted file mode 100644
index 634ce56354..0000000000
--- a/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ *      Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI_AR71XX
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port)	ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port)	ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port)	(port)
-+#define __swizzle_addr_q(port)	(port)
-+
-+# define ioswabb(a, x)           (x)
-+# define __mem_ioswabb(a, x)     (x)
-+# define ioswabw(a, x)           (x)
-+# define __mem_ioswabw(a, x)     cpu_to_le16(x)
-+# define ioswabl(a, x)           (x)
-+# define __mem_ioswabl(a, x)     cpu_to_le32(x)
-+# define ioswabq(a, x)           (x)
-+# define __mem_ioswabq(a, x)     cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -71,6 +71,45 @@ static const u32 ar71xx_pci_read_mask[8]
- 	0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
- };
- 
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+	unsigned long phys = CPHYSADDR(port);
-+
-+	return (phys >= AR71XX_PCI_MEM_BASE &&
-+		phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+	return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+	return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+	if (__ath79_pci_swizzle_b)
-+		return __ath79_pci_swizzle_b(port);
-+
-+	return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+	if (__ath79_pci_swizzle_w)
-+		return __ath79_pci_swizzle_w(port);
-+
-+	return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
- {
- 	u32 t;
-@@ -279,6 +318,9 @@ static int ar71xx_pci_probe(struct platf
- 
- 	register_pci_controller(&apc->pci_ctrl);
- 
-+	__ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+	__ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch
deleted file mode 100644
index 4e2a6fecee..0000000000
--- a/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch
+++ /dev/null
@@ -1,103 +0,0 @@
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -239,6 +239,37 @@ int ehci_reset(struct ehci_hcd *ehci)
- 	command |= CMD_RESET;
- 	dbg_cmd (ehci, "reset", command);
- 	ehci_writel(ehci, command, &ehci->regs->command);
-+
-+	if (ehci->qca_force_host_mode) {
-+		u32 usbmode;
-+
-+		udelay(1000);
-+
-+		usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
-+		usbmode |= USBMODE_CM_HC | (1 << 4);
-+		ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
-+
-+		ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
-+			 ehci_readl(ehci, &ehci->regs->usbmode));
-+	}
-+
-+	if (ehci->qca_force_16bit_ptw) {
-+		u32 port_status;
-+
-+		udelay(1000);
-+
-+		/* enable 16-bit UTMI interface */
-+		port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+		port_status |= BIT(28);
-+		ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
-+
-+		ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
-+			 ehci_readl(ehci, &ehci->regs->port_status[0]));
-+	}
-+
-+	if (ehci->reset_notifier)
-+		ehci->reset_notifier(ehci_to_hcd(ehci));
-+
- 	ehci->rh_state = EHCI_RH_HALTED;
- 	ehci->next_statechange = jiffies;
- 	retval = ehci_handshake(ehci, &ehci->regs->command,
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -219,6 +219,10 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
- 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
- 	unsigned		ignore_oc:1;
-+	unsigned		qca_force_host_mode:1;
-+	unsigned		qca_force_16bit_ptw:1; /* force 16 bit UTMI */
-+
-+	void (*reset_notifier)(struct usb_hcd *hcd);
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -51,6 +51,8 @@ struct usb_ehci_pdata {
- 	unsigned	reset_on_resume:1;
- 	unsigned	dma_mask_64:1;
- 	unsigned	ignore_oc:1;
-+	unsigned	qca_force_host_mode:1;
-+	unsigned	qca_force_16bit_ptw:1;
- 
- 	/* Turn on all power and clocks */
- 	int (*power_on)(struct platform_device *pdev);
-@@ -60,6 +62,7 @@ struct usb_ehci_pdata {
- 	 * turn off everything else */
- 	void (*power_suspend)(struct platform_device *pdev);
- 	int (*pre_setup)(struct usb_hcd *hcd);
-+	void (*reset_notifier)(struct platform_device *pdev);
- };
- 
- #endif /* __USB_CORE_EHCI_PDRIVER_H */
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -48,6 +48,14 @@ struct ehci_platform_priv {
- 
- static const char hcd_name[] = "ehci-platform";
- 
-+static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
-+{
-+	struct platform_device *pdev = to_platform_device(hcd->self.controller);
-+	struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
-+
-+	pdata->reset_notifier(pdev);
-+}
-+
- static int ehci_platform_reset(struct usb_hcd *hcd)
- {
- 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
-@@ -215,6 +223,13 @@ static int ehci_platform_probe(struct pl
- 		priv->reset_on_resume = true;
- 	if (pdata->ignore_oc)
- 		ehci->ignore_oc = 1;
-+	if (pdata->qca_force_host_mode)
-+		ehci->qca_force_host_mode = 1;
-+	if (pdata->qca_force_16bit_ptw)
-+		ehci->qca_force_16bit_ptw = 1;
-+
-+	if (pdata->reset_notifier)
-+		ehci->reset_notifier = ehci_platform_reset_notifier;
- 
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- 	if (ehci->big_endian_mmio) {
diff --git a/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch
deleted file mode 100644
index 8f8f349a66..0000000000
--- a/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb
- static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
--	int ret, i;
-+	int ret;
- 
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b
- 
- 	ctrl->ops->set_mdio_dir(ctrl, 0);
- 
--	/* check the turnaround bit: the PHY should be driving it to zero, if this
--	 * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
--	 */
--	if (mdiobb_get_bit(ctrl) != 0 &&
--	    !(bus->phy_ignore_ta_mask & (1 << phy))) {
--		/* PHY didn't drive TA low -- flush any bits it
--		 * may be trying to send.
--		 */
--		for (i = 0; i < 32; i++)
--			mdiobb_get_bit(ctrl);
--
--		return 0xffff;
--	}
-+	mdiobb_get_bit(ctrl);
- 
- 	ret = mdiobb_get_num(ctrl, 16);
- 	mdiobb_get_bit(ctrl);
diff --git a/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
deleted file mode 100644
index a830346a31..0000000000
--- a/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jun 2015 13:15:08 +0200
-Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
-
-It seems some phys have some maximum timings for accessing the MDIO line,
-resulting in bit errors under cpu stress. Prevent this from happening by
-disabling interrupts when sending commands.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/phy/mdio-bitbang.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -17,6 +17,7 @@
-  * kind, whether express or implied.
-  */
- 
-+#include <linux/irqflags.h>
- #include <linux/module.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/types.h>
-@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
- 	int ret;
-+	unsigned long flags;
- 
-+	local_irq_save(flags);
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
- 		mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
-@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b
- 
- 	ret = mdiobb_get_num(ctrl, 16);
- 	mdiobb_get_bit(ctrl);
-+	local_irq_restore(flags);
-+
- 	return ret;
- }
- 
- static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
-+	unsigned long flags;
- 
-+	local_irq_save(flags);
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
- 		mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
-@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus *
- 
- 	ctrl->ops->set_mdio_dir(ctrl, 0);
- 	mdiobb_get_bit(ctrl);
-+	local_irq_restore(flags);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch
deleted file mode 100644
index f765a08c98..0000000000
--- a/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch
+++ /dev/null
@@ -1,891 +0,0 @@
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const
- 	const unsigned int *stop = word + ihl;
- 	unsigned int csum;
- 	int carry;
-+	unsigned int w;
- 
--	csum = word[0];
--	csum += word[1];
--	carry = (csum < word[1]);
-+	csum = net_hdr_word(word++);
-+
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	csum += word[2];
--	carry = (csum < word[2]);
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	csum += word[3];
--	carry = (csum < word[3]);
-+	w = net_hdr_word(word++);
-+	csum += w;
-+	carry = (csum < w);
- 	csum += carry;
- 
--	word += 4;
- 	do {
--		csum += *word;
--		carry = (csum < *word);
-+		w = net_hdr_word(word++);
-+		csum += w;
-+		carry = (csum < w);
- 		csum += carry;
--		word++;
- 	} while (word != stop);
- 
- 	return csum_fold(csum);
-@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co
- 	return csum_fold(csum_partial(buff, len, 0));
- }
- 
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
--					  const struct in6_addr *daddr,
--					  __u32 len, __u8 proto,
--					  __wsum sum)
--{
--	__wsum tmp;
--
--	__asm__(
--	"	.set	push		# csum_ipv6_magic\n"
--	"	.set	noreorder	\n"
--	"	.set	noat		\n"
--	"	addu	%0, %5		# proto (long in network byte order)\n"
--	"	sltu	$1, %0, %5	\n"
--	"	addu	%0, $1		\n"
--
--	"	addu	%0, %6		# csum\n"
--	"	sltu	$1, %0, %6	\n"
--	"	lw	%1, 0(%2)	# four words source address\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 4(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 8(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 12(%2)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 0(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 4(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 8(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	lw	%1, 12(%3)	\n"
--	"	addu	%0, $1		\n"
--	"	addu	%0, %1		\n"
--	"	sltu	$1, %0, %1	\n"
--
--	"	addu	%0, $1		# Add final carry\n"
--	"	.set	pop"
--	: "=&r" (sum), "=&r" (tmp)
--	: "r" (saddr), "r" (daddr),
--	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
--
--	return csum_fold(sum);
--}
--
- #include <asm-generic/checksum.h>
- #endif /* CONFIG_GENERIC_CSUM */
- 
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -103,7 +103,7 @@ struct iphdr {
- 	__be32	saddr;
- 	__be32	daddr;
- 	/*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -131,7 +131,7 @@ struct ipv6hdr {
- 
- 	struct	in6_addr	saddr;
- 	struct	in6_addr	daddr;
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -55,7 +55,7 @@ struct tcphdr {
- 	__be16	window;
- 	__sum16	check;
- 	__be16	urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /*
-  *	The union cast uses a gcc extension to avoid aliasing problems
-@@ -65,7 +65,7 @@ struct tcphdr {
- union tcp_word_hdr { 
- 	struct tcphdr hdr;
- 	__be32 		  words[5];
--}; 
-+} __attribute__((packed, aligned(2)));
- 
- #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
- 
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -25,7 +25,7 @@ struct udphdr {
- 	__be16	dest;
- 	__be16	len;
- 	__sum16	check;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /* UDP socket options */
- #define UDP_CORK	1	/* Never send partially complete segments */
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -263,8 +263,8 @@ nf_ct_get_tuple(const struct sk_buff *sk
- 
- 	switch (l3num) {
- 	case NFPROTO_IPV4:
--		tuple->src.u3.ip = ap[0];
--		tuple->dst.u3.ip = ap[1];
-+		tuple->src.u3.ip = net_hdr_word(ap++);
-+		tuple->dst.u3.ip = net_hdr_word(ap);
- 		break;
- 	case NFPROTO_IPV6:
- 		memcpy(tuple->src.u3.ip6, ap, sizeof(tuple->src.u3.ip6));
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -82,7 +82,7 @@ struct icmphdr {
- 	} frag;
- 	__u8	reserved[4];
-   } un;
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -43,7 +43,7 @@ struct in6_addr {
- #define s6_addr16		in6_u.u6_addr16
- #define s6_addr32		in6_u.u6_addr32
- #endif
--};
-+} __attribute__((packed, aligned(2)));
- #endif /* __UAPI_DEF_IN6_ADDR */
- 
- #if __UAPI_DEF_SOCKADDR_IN6
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -39,6 +39,7 @@
- #include <linux/ipsec.h>
- #include <linux/times.h>
- #include <linux/slab.h>
-+#include <asm/unaligned.h>
- #include <linux/uaccess.h>
- #include <linux/ipv6.h>
- #include <linux/icmpv6.h>
-@@ -836,10 +837,10 @@ static void tcp_v6_send_response(const s
- 	topt = (__be32 *)(t1 + 1);
- 
- 	if (tsecr) {
--		*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
--				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
--		*topt++ = htonl(tsval);
--		*topt++ = htonl(tsecr);
-+		put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+		put_unaligned_be32(tsval, topt++);
-+		put_unaligned_be32(tsecr, topt++);
- 	}
- 
- #ifdef CONFIG_TCP_MD5SIG
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -6,6 +6,7 @@
- 
- #define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
- #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
-+
- /*
-  * This structure contains configuration options per IPv6 link.
-  */
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -478,7 +478,7 @@ int ipv6_recv_error(struct sock *sk, str
- 				ipv6_iface_scope_id(&sin->sin6_addr,
- 						    IP6CB(skb)->iif);
- 		} else {
--			ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+			ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- 					       &sin->sin6_addr);
- 			sin->sin6_scope_id = 0;
- 		}
-@@ -828,12 +828,12 @@ int ip6_datagram_send_ctl(struct net *ne
- 			}
- 
- 			if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
--				if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+				if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- 					err = -EINVAL;
- 					goto exit_f;
- 				}
- 			}
--			fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+			fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- 			break;
- 
- 		case IPV6_2292HOPOPTS:
---- a/net/ipv6/ip6_gre.c
-+++ b/net/ipv6/ip6_gre.c
-@@ -452,7 +452,7 @@ static void ip6gre_err(struct sk_buff *s
- 		return;
- 	ipv6h = (const struct ipv6hdr *)skb->data;
- 	greh = (const struct gre_base_hdr *)(skb->data + offset);
--	key = key_off ? *(__be32 *)(skb->data + key_off) : 0;
-+	key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0;
- 
- 	t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
- 				 key, greh->protocol);
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -756,7 +756,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- 		goto drop;
- 	}
- 
--	pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+	pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- 	if (pkt_len <= IPV6_MAXPLEN) {
- 		__IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS);
- 		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff+2);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -230,5 +230,11 @@ struct callback_head {
- typedef void (*rcu_callback_t)(struct rcu_head *head);
- typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func);
- 
-+struct net_hdr_word {
-+       u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /*  __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1422,8 +1422,8 @@ struct sk_buff *inet_gro_receive(struct
- 	if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- 		goto out_unlock;
- 
--	id = ntohl(*(__be32 *)&iph->id);
--	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-+	id = ntohl(net_hdr_word(&iph->id));
-+	flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
- 	id >>= 16;
- 
- 	list_for_each_entry(p, head, list) {
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -448,7 +448,7 @@ static struct neighbour *ipv4_neigh_look
- 	else if (skb)
- 		pkey = &ip_hdr(skb)->daddr;
- 
--	n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
-+	n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
- 	if (n)
- 		return n;
- 	return neigh_create(&arp_tbl, pkey, dev);
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -461,48 +461,53 @@ static void tcp_options_write(__be32 *pt
- 	u16 options = opts->options;	/* mungable copy */
- 
- 	if (unlikely(OPTION_MD5 & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
--			       (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+			      (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- 		/* overload cookie hash location */
- 		opts->hash_location = (__u8 *)ptr;
- 		ptr += 4;
- 	}
- 
- 	if (unlikely(opts->mss)) {
--		*ptr++ = htonl((TCPOPT_MSS << 24) |
--			       (TCPOLEN_MSS << 16) |
--			       opts->mss);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+			      opts->mss);
- 	}
- 
- 	if (likely(OPTION_TS & options)) {
- 		if (unlikely(OPTION_SACK_ADVERTISE & options)) {
--			*ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
--				       (TCPOLEN_SACK_PERM << 16) |
--				       (TCPOPT_TIMESTAMP << 8) |
--				       TCPOLEN_TIMESTAMP);
-+			net_hdr_word(ptr++) =
-+				htonl((TCPOPT_SACK_PERM << 24) |
-+				      (TCPOLEN_SACK_PERM << 16) |
-+				      (TCPOPT_TIMESTAMP << 8) |
-+				      TCPOLEN_TIMESTAMP);
- 			options &= ~OPTION_SACK_ADVERTISE;
- 		} else {
--			*ptr++ = htonl((TCPOPT_NOP << 24) |
--				       (TCPOPT_NOP << 16) |
--				       (TCPOPT_TIMESTAMP << 8) |
--				       TCPOLEN_TIMESTAMP);
-+			net_hdr_word(ptr++) =
-+				htonl((TCPOPT_NOP << 24) |
-+				      (TCPOPT_NOP << 16) |
-+				      (TCPOPT_TIMESTAMP << 8) |
-+				      TCPOLEN_TIMESTAMP);
- 		}
--		*ptr++ = htonl(opts->tsval);
--		*ptr++ = htonl(opts->tsecr);
-+		net_hdr_word(ptr++) = htonl(opts->tsval);
-+		net_hdr_word(ptr++) = htonl(opts->tsecr);
- 	}
- 
- 	if (unlikely(OPTION_SACK_ADVERTISE & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) |
--			       (TCPOPT_NOP << 16) |
--			       (TCPOPT_SACK_PERM << 8) |
--			       TCPOLEN_SACK_PERM);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_NOP << 16) |
-+			      (TCPOPT_SACK_PERM << 8) |
-+			      TCPOLEN_SACK_PERM);
- 	}
- 
- 	if (unlikely(OPTION_WSCALE & options)) {
--		*ptr++ = htonl((TCPOPT_NOP << 24) |
--			       (TCPOPT_WINDOW << 16) |
--			       (TCPOLEN_WINDOW << 8) |
--			       opts->ws);
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_WINDOW << 16) |
-+			      (TCPOLEN_WINDOW << 8) |
-+			      opts->ws);
- 	}
- 
- 	if (unlikely(opts->num_sack_blocks)) {
-@@ -510,16 +515,17 @@ static void tcp_options_write(__be32 *pt
- 			tp->duplicate_sack : tp->selective_acks;
- 		int this_sack;
- 
--		*ptr++ = htonl((TCPOPT_NOP  << 24) |
--			       (TCPOPT_NOP  << 16) |
--			       (TCPOPT_SACK <<  8) |
--			       (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+		net_hdr_word(ptr++) =
-+			htonl((TCPOPT_NOP << 24) |
-+			      (TCPOPT_NOP << 16) |
-+			      (TCPOPT_SACK << 8) |
-+			      (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- 						     TCPOLEN_SACK_PERBLOCK)));
- 
- 		for (this_sack = 0; this_sack < opts->num_sack_blocks;
- 		     ++this_sack) {
--			*ptr++ = htonl(sp[this_sack].start_seq);
--			*ptr++ = htonl(sp[this_sack].end_seq);
-+			net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+			net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- 		}
- 
- 		tp->rx_opt.dsack = 0;
-@@ -532,13 +538,14 @@ static void tcp_options_write(__be32 *pt
- 
- 		if (foc->exp) {
- 			len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
--			*ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
-+			net_hdr_word(ptr) =
-+				htonl((TCPOPT_EXP << 24) | (len << 16) |
- 				     TCPOPT_FASTOPEN_MAGIC);
- 			p += TCPOLEN_EXP_FASTOPEN_BASE;
- 		} else {
- 			len = TCPOLEN_FASTOPEN_BASE + foc->len;
--			*p++ = TCPOPT_FASTOPEN;
--			*p++ = len;
-+			net_hdr_word(p++) = TCPOPT_FASTOPEN;
-+			net_hdr_word(p++) = len;
- 		}
- 
- 		memcpy(p, foc->val, foc->len);
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -33,7 +33,7 @@ struct igmphdr {
- 	__u8 code;		/* For newer IGMP */
- 	__sum16 csum;
- 	__be32 group;
--};
-+} __attribute__((packed, aligned(2)));
- 
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE		1
-@@ -49,7 +49,7 @@ struct igmpv3_grec {
- 	__be16	grec_nsrcs;
- 	__be32	grec_mca;
- 	__be32	grec_src[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct igmpv3_report {
- 	__u8 type;
-@@ -58,7 +58,7 @@ struct igmpv3_report {
- 	__be16 resv2;
- 	__be16 ngrec;
- 	struct igmpv3_grec grec[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct igmpv3_query {
- 	__u8 type;
-@@ -79,7 +79,7 @@ struct igmpv3_query {
- 	__u8 qqic;
- 	__be16 nsrcs;
- 	__be32 srcs[0];
--};
-+} __attribute__((packed, aligned(2)));
- 
- #define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -111,7 +111,7 @@ __be32 __skb_flow_get_ports(const struct
- 		ports = __skb_header_pointer(skb, thoff + poff,
- 					     sizeof(_ports), data, hlen, &_ports);
- 		if (ports)
--			return *ports;
-+			return (__be32)net_hdr_word(ports);
- 	}
- 
- 	return 0;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -77,7 +77,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
- 
- 
- #define ICMPV6_ROUTER_PREF_LOW		0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -89,7 +89,7 @@ struct ra_msg {
-         struct icmp6hdr		icmph;
- 	__be32			reachable_time;
- 	__be32			retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
- 
- struct rd_msg {
- 	struct icmp6hdr icmph;
-@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- 	const u32 *p32 = pkey;
- 
--	return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
--		(p32[1] * hash_rnd[1]) +
--		(p32[2] * hash_rnd[2]) +
--		(p32[3] * hash_rnd[3]));
-+	return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+		(net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+		(net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+		(net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
- 
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -165,7 +165,7 @@ next_knode:
- 			data = skb_header_pointer(skb, toff, 4, &hdata);
- 			if (!data)
- 				goto out;
--			if ((*data ^ key->val) & key->mask) {
-+			if ((net_hdr_word(data) ^ key->val) & key->mask) {
- 				n = rcu_dereference_bh(n->next);
- 				goto next_knode;
- 			}
-@@ -218,8 +218,8 @@ check_terminal:
- 						  &hdata);
- 			if (!data)
- 				goto out;
--			sel = ht->divisor & u32_hash_fold(*data, &n->sel,
--							  n->fshift);
-+			sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+							  &n->sel, n->fshift);
- 		}
- 		if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- 			goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -223,7 +223,7 @@ static struct sk_buff *ipv6_gro_receive(
- 			continue;
- 
- 		iph2 = (struct ipv6hdr *)(p->data + off);
--		first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
-+		first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
- 
- 		/* All fields must match except length and Traffic Class.
- 		 * XXX skbs on the gro_list have all been parsed and pulled
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -47,7 +47,7 @@ struct prefix_info {
- 	__be32			reserved2;
- 
- 	struct in6_addr		prefix;
--};
-+} __attribute__((packed, aligned(2)));
- 
- #include <linux/netdevice.h>
- #include <net/if_inet6.h>
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct
- 	if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- 		return 0;
- 
--	from = *(__be32 *)iph;
-+	from = net_hdr_word(iph);
- 	to = from | htonl(INET_ECN_CE << 20);
--	*(__be32 *)iph = to;
-+	net_hdr_word(iph) = to;
- 	if (skb->ip_summed == CHECKSUM_COMPLETE)
- 		skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
- 				     (__force __wsum)to);
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -149,7 +149,7 @@ struct frag_hdr {
- 	__u8	reserved;
- 	__be16	frag_off;
- 	__be32	identification;
--};
-+} __attribute__((packed, aligned(2)));
- 
- #define	IP6_MF		0x0001
- #define	IP6_OFFSET	0xFFF8
-@@ -499,8 +499,8 @@ static inline void __ipv6_addr_set_half(
- 	}
- #endif
- #endif
--	addr[0] = wh;
--	addr[1] = wl;
-+	net_hdr_word(&addr[0]) = wh;
-+	net_hdr_word(&addr[1]) = wl;
- }
- 
- static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -559,6 +559,8 @@ static inline bool ipv6_prefix_equal(con
- 	const __be32 *a1 = addr1->s6_addr32;
- 	const __be32 *a2 = addr2->s6_addr32;
- 	unsigned int pdw, pbi;
-+	/* Used for last <32-bit fraction of prefix */
-+	u32 pbia1, pbia2;
- 
- 	/* check complete u32 in prefix */
- 	pdw = prefixlen >> 5;
-@@ -567,7 +569,9 @@ static inline bool ipv6_prefix_equal(con
- 
- 	/* check incomplete u32 in prefix */
- 	pbi = prefixlen & 0x1f;
--	if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+	pbia1 = net_hdr_word(&a1[pdw]);
-+	pbia2 = net_hdr_word(&a2[pdw]);
-+	if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- 		return false;
- 
- 	return true;
-@@ -683,13 +687,13 @@ static inline void ipv6_addr_set_v4mappe
-  */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
--	const __be32 *a1 = token1, *a2 = token2;
-+	const struct in6_addr *a1 = token1, *a2 = token2;
- 	int i;
- 
- 	addrlen >>= 2;
- 
- 	for (i = 0; i < addrlen; i++) {
--		__be32 xb = a1[i] ^ a2[i];
-+		__be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- 		if (xb)
- 			return i * 32 + 31 - __fls(ntohl(xb));
- 	}
-@@ -876,17 +880,18 @@ static inline int ip6_multipath_hash_pol
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- 				__be32 flowlabel)
- {
--	*(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+	net_hdr_word((__be32 *)hdr) =
-+		htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
- 
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
--	return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
- 
- static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
- {
--	return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
-+	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
- }
- 
- static inline u8 ip6_tclass(__be32 flowinfo)
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -3,6 +3,7 @@
- #define _NET_SECURE_SEQ
- 
- #include <linux/types.h>
-+#include <linux/in6.h>
- 
- u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -84,7 +84,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- 	__be32	s_addr;
--};
-+} __attribute__((packed, aligned(2)));
- #endif
- 
- #define IP_TOS		1
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -142,7 +142,7 @@ static __be32 addr_bit_set(const void *t
- 	 * See include/asm-generic/bitops/le.h.
- 	 */
- 	return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
--	       addr[fn_bit >> 5];
-+	       net_hdr_word(&addr[fn_bit >> 5]);
- }
- 
- struct fib6_info *fib6_info_alloc(gfp_t gfp_flags)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -423,7 +423,7 @@ static void tcp_sack(const struct sk_buf
- 
- 	/* Fast path for timestamp-only option */
- 	if (length == TCPOLEN_TSTAMP_ALIGNED
--	    && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+	    && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- 				       | (TCPOPT_NOP << 16)
- 				       | (TCPOPT_TIMESTAMP << 8)
- 				       | TCPOLEN_TIMESTAMP))
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -194,8 +194,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- 	if (!pskb_may_pull(skb, hlen))
- 		return -EINVAL;
- 
--	*spi = *(__be32 *)(skb_transport_header(skb) + offset);
--	*seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
-+	*spi = net_hdr_word(skb_transport_header(skb) + offset);
-+	*seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- 	return 0;
- }
- EXPORT_SYMBOL(xfrm_parse_spi);
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -3898,14 +3898,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- 	const __be32 *ptr = (const __be32 *)(th + 1);
- 
--	if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
--			  | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+	if (net_hdr_word(ptr) ==
-+	    htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+		  (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- 		tp->rx_opt.saw_tstamp = 1;
- 		++ptr;
--		tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+		tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- 		++ptr;
--		if (*ptr)
--			tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+		if (net_hdr_word(ptr))
-+			tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+					       tp->tsoffset;
- 		else
- 			tp->rx_opt.rcv_tsecr = 0;
- 		return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -51,6 +51,7 @@ struct pppoe_addr {
-  */
- struct pptp_addr {
- 	__u16		call_id;
-+	__u16		pad;
- 	struct in_addr	sin_addr;
- };
- 
---- a/net/ipv6/netfilter/nf_log_ipv6.c
-+++ b/net/ipv6/netfilter/nf_log_ipv6.c
-@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct net
- 	/* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
- 	nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
- 	       ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
--	       (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
-+	       (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
- 	       ih->hop_limit,
--	       (ntohl(*(__be32 *)ih) & 0x000fffff));
-+	       (ntohl(net_hdr_word(ih)) & 0x000fffff));
- 
- 	fragment = 0;
- 	ptr = ip6hoff + sizeof(struct ipv6hdr);
---- a/include/net/neighbour.h
-+++ b/include/net/neighbour.h
-@@ -266,8 +266,10 @@ static inline bool neigh_key_eq128(const
- 	const u32 *n32 = (const u32 *)n->primary_key;
- 	const u32 *p32 = pkey;
- 
--	return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
--		(n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
-+	return ((n32[0] ^ net_hdr_word(&p32[0])) |
-+		(n32[1] ^ net_hdr_word(&p32[1])) |
-+		(n32[2] ^ net_hdr_word(&p32[2])) |
-+		(n32[3] ^ net_hdr_word(&p32[3]))) == 0;
- }
- 
- static inline struct neighbour *___neigh_lookup_noref(
---- a/include/uapi/linux/netfilter_arp/arp_tables.h
-+++ b/include/uapi/linux/netfilter_arp/arp_tables.h
-@@ -70,7 +70,7 @@ struct arpt_arp {
- 	__u8 flags;
- 	/* Inverse flags */
- 	__u16 invflags;
--};
-+} __attribute__((aligned(4)));
- 
- /* Values for "flag" field in struct arpt_ip (general arp structure).
-  * No flags defined yet.
---- a/net/core/utils.c
-+++ b/net/core/utils.c
-@@ -447,8 +447,14 @@ void inet_proto_csum_replace16(__sum16 *
- 			       bool pseudohdr)
- {
- 	__be32 diff[] = {
--		~from[0], ~from[1], ~from[2], ~from[3],
--		to[0], to[1], to[2], to[3],
-+		~net_hdr_word(&from[0]),
-+		~net_hdr_word(&from[1]),
-+		~net_hdr_word(&from[2]),
-+		~net_hdr_word(&from[3]),
-+		net_hdr_word(&to[0]),
-+		net_hdr_word(&to[1]),
-+		net_hdr_word(&to[2]),
-+		net_hdr_word(&to[3]),
- 	};
- 	if (skb->ip_summed != CHECKSUM_PARTIAL) {
- 		*sum = csum_fold(csum_partial(diff, sizeof(diff),
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons
-  * @b: Pointer to Ethernet header
-  *
-  * Compare two Ethernet headers, returns 0 if equal.
-- * This assumes that the network header (i.e., IP header) is 4-byte
-+ * This assumes that the network header (i.e., IP header) is 2-byte
-  * aligned OR the platform can handle unaligned access.  This is the
-  * case for all packets coming into netif_receive_skb or similar
-  * entry points.
-@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe
- 	fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
- 	return fold;
- #else
--	u32 *a32 = (u32 *)((u8 *)a + 2);
--	u32 *b32 = (u32 *)((u8 *)b + 2);
-+	const u16 *a16 = a;
-+	const u16 *b16 = b;
- 
--	return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
--	       (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-+	return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
-+	       (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
-+	       (a16[6] ^ b16[6]);
- #endif
- }
- 
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -226,7 +226,7 @@ struct sk_buff *tcp_gro_receive(struct l
- 
- 		th2 = tcp_hdr(p);
- 
--		if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+		if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
- 			NAPI_GRO_CB(p)->same_flow = 0;
- 			continue;
- 		}
-@@ -244,8 +244,8 @@ found:
- 		  ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
- 	flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
- 	for (i = sizeof(*th); i < thlen; i += 4)
--		flush |= *(u32 *)((u8 *)th + i) ^
--			 *(u32 *)((u8 *)th2 + i);
-+		flush |= net_hdr_word((u8 *)th + i) ^
-+			 net_hdr_word((u8 *)th2 + i);
- 
- 	/* When we receive our second frame we can made a decision on if we
- 	 * continue this flow as an atomic flow with a fixed ID or if we use
---- a/net/ipv6/netfilter/ip6table_mangle.c
-+++ b/net/ipv6/netfilter/ip6table_mangle.c
-@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- 	hop_limit = ipv6_hdr(skb)->hop_limit;
- 
- 	/* flowlabel and prio (includes version, which shouldn't change either */
--	flowlabel = *((u_int32_t *)ipv6_hdr(skb));
-+	flowlabel = net_hdr_word(ipv6_hdr(skb));
- 
- 	ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
- 
-@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- 	     !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
- 	     skb->mark != mark ||
- 	     ipv6_hdr(skb)->hop_limit != hop_limit ||
--	     flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
-+	     flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
- 		err = ip6_route_me_harder(state->net, skb);
- 		if (err < 0)
- 			ret = NF_DROP_ERR(err);
diff --git a/target/linux/bcm53xx/Makefile b/target/linux/bcm53xx/Makefile
index 4171a04ee4..2af1c7e719 100644
--- a/target/linux/bcm53xx/Makefile
+++ b/target/linux/bcm53xx/Makefile
@@ -14,7 +14,6 @@ MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
 CPU_TYPE:=cortex-a9
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 define Target/Description
 	Build firmware images for Broadcom based BCM47xx/53xx routers with ARM CPU, *not* MIPS.
diff --git a/target/linux/bcm53xx/patches-4.19/030-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch b/target/linux/bcm53xx/patches-4.19/030-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch
deleted file mode 100644
index e6e2522f08..0000000000
--- a/target/linux/bcm53xx/patches-4.19/030-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From b0465fdfdd7e7c1afe2fae1cb36b94e1ce89732e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 28 Jul 2018 14:13:57 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify flash partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Most devices use Broadcom standard partitions which allows them to be
-described with the "brcm,bcm947xx-cfe-partitions". Exceptions are:
-1) TP-LINK devices which use "os-image" partition with TRX containing
-   kernel only + separated rootfs partition.
-2) Asus RT-AC87U with custom "asus" partition.
-
-This commit also removes undocumented and unsupported linux,part-probe
-binding which got accidentally upstreamed while describing SPI
-controller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 28 +++++++++++++++++++
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts        | 31 ++++++++++++++++++++++
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts  | 28 +++++++++++++++++++
- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi           |  4 +++
- arch/arm/boot/dts/bcm5301x.dtsi                    |  5 +++-
- 5 files changed, 95 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -94,6 +94,34 @@
- 
- &spi_nor {
- 	status = "okay";
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		boot@0 {
-+			label = "boot";
-+			reg = <0x000000 0x040000>;
-+			read-only;
-+		};
-+
-+		os-image@100000 {
-+			label = "os-image";
-+			reg = <0x040000 0x200000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		rootfs@240000 {
-+			label = "rootfs";
-+			reg = <0x240000 0xc00000>;
-+		};
-+
-+		nvram@ff0000 {
-+			label = "nvram";
-+			reg = <0xff0000 0x010000>;
-+		};
-+	};
- };
- 
- &usb2 {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -66,3 +66,34 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&nandcs {
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		boot@0 {
-+			label = "boot";
-+			reg = <0x00000000 0x00080000>;
-+			read-only;
-+		};
-+
-+		nvram@80000 {
-+			label = "nvram";
-+			reg = <0x00080000 0x00180000>;
-+		};
-+
-+		firmware@200000 {
-+			label = "firmware";
-+			reg = <0x00200000 0x07cc0000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		asus@7ec0000 {
-+			label = "asus";
-+			reg = <0x07ec0000 0x00140000>;
-+			read-only;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -103,6 +103,34 @@
- 
- &spi_nor {
- 	status = "okay";
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		boot@0 {
-+			label = "boot";
-+			reg = <0x000000 0x040000>;
-+			read-only;
-+		};
-+
-+		os-image@100000 {
-+			label = "os-image";
-+			reg = <0x040000 0x200000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		rootfs@240000 {
-+			label = "rootfs";
-+			reg = <0x240000 0xc00000>;
-+		};
-+
-+		nvram@ff0000 {
-+			label = "nvram";
-+			reg = <0xff0000 0x010000>;
-+		};
-+	};
- };
- 
- &usb3_phy {
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -12,6 +12,10 @@
- 			reg = <0>;
- 			#address-cells = <1>;
- 			#size-cells = <1>;
-+
-+			partitions {
-+				compatible = "brcm,bcm947xx-cfe-partitions";
-+			};
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -475,8 +475,11 @@
- 			compatible = "jedec,spi-nor";
- 			reg = <0>;
- 			spi-max-frequency = <20000000>;
--			linux,part-probe = "ofpart", "bcm47xxpart";
- 			status = "disabled";
-+
-+			partitions {
-+				compatible = "brcm,bcm947xx-cfe-partitions";
-+			};
- 		};
- 	};
- 
diff --git a/target/linux/bcm53xx/patches-4.19/031-v4.21-0001-ARM-dts-BCM5301X-Relicense-BCM47081-BCM4709-files-to.patch b/target/linux/bcm53xx/patches-4.19/031-v4.21-0001-ARM-dts-BCM5301X-Relicense-BCM47081-BCM4709-files-to.patch
deleted file mode 100644
index 2dc6b2c23c..0000000000
--- a/target/linux/bcm53xx/patches-4.19/031-v4.21-0001-ARM-dts-BCM5301X-Relicense-BCM47081-BCM4709-files-to.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 26ff86f7794b9466481ccf29ac79925d327f106d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 20 Sep 2018 13:18:47 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the
- GPL 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by other BCM5301X files and is preferred as:
-1) GPL 2.0+ makes it clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-Both files were fully developed by me. Commits touching them were signed
-by Florian and Hauke due to submitting process only.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47081.dtsi | 13 +------------
- arch/arm/boot/dts/bcm4709.dtsi  |  3 +--
- 2 files changed, 2 insertions(+), 14 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47081.dtsi
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-  * Broadcom BCM470X / BCM5301X ARM platform code.
-  * DTS for BCM47081 SoC.
-  *
-  * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
-  */
- 
- #include "bcm5301x.dtsi"
---- a/arch/arm/boot/dts/bcm4709.dtsi
-+++ b/arch/arm/boot/dts/bcm4709.dtsi
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
-  */
- 
- #include "bcm4708.dtsi"
diff --git a/target/linux/bcm53xx/patches-4.19/031-v4.21-0002-ARM-dts-BCM5301X-Relicense-BCM47094-file-to-the-GPL-.patch b/target/linux/bcm53xx/patches-4.19/031-v4.21-0002-ARM-dts-BCM5301X-Relicense-BCM47094-file-to-the-GPL-.patch
deleted file mode 100644
index 86c6b0ae41..0000000000
--- a/target/linux/bcm53xx/patches-4.19/031-v4.21-0002-ARM-dts-BCM5301X-Relicense-BCM47094-file-to-the-GPL-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From d10967344375026ca8762b6080dec2585d895906 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 20 Sep 2018 13:20:19 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by other BCM5301X files and is preferred as:
-1) GPL 2.0+ makes it clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-This file has been developed by me & once modified by Vivek.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094.dtsi | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
-  */
- 
- #include "bcm4708.dtsi"
diff --git a/target/linux/bcm53xx/patches-4.19/031-v4.21-0003-ARM-dts-BCM53573-Relicense-Tenda-AC9-file-to-the-GPL.patch b/target/linux/bcm53xx/patches-4.19/031-v4.21-0003-ARM-dts-BCM53573-Relicense-Tenda-AC9-file-to-the-GPL.patch
deleted file mode 100644
index a5358b70c3..0000000000
--- a/target/linux/bcm53xx/patches-4.19/031-v4.21-0003-ARM-dts-BCM53573-Relicense-Tenda-AC9-file-to-the-GPL.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 1c9001b4f69a37820862286b3bbcdde152a52dcf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 20 Sep 2018 13:37:47 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+
- / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by most of BCM5301X files and is preferred as:
-1) GPL 2.0+ makes it clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-This file was fully developed by me.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
-  */
- 
- /dts-v1/;
diff --git a/target/linux/bcm53xx/patches-4.19/031-v4.21-0004-ARM-dts-BCM53573-Relicense-SoC-file-to-the-GPL-2.0-M.patch b/target/linux/bcm53xx/patches-4.19/031-v4.21-0004-ARM-dts-BCM53573-Relicense-SoC-file-to-the-GPL-2.0-M.patch
deleted file mode 100644
index 56cd6376aa..0000000000
--- a/target/linux/bcm53xx/patches-4.19/031-v4.21-0004-ARM-dts-BCM53573-Relicense-SoC-file-to-the-GPL-2.0-M.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From ca3a6e705cad10662827093d5426abe078861793 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 20 Sep 2018 13:39:28 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by most of BCM5301X files and is preferred as:
-1) GPL 2.0+ makes it clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-This file has been developed by me & once modified by Rob dropping a
-single leading zero in an UART address.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
-  */
- 
- #include <dt-bindings/gpio/gpio.h>
diff --git a/target/linux/bcm53xx/patches-4.19/031-v4.21-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch b/target/linux/bcm53xx/patches-4.19/031-v4.21-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch
deleted file mode 100644
index da37542f9d..0000000000
--- a/target/linux/bcm53xx/patches-4.19/031-v4.21-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 03e96644d7a810916fc4997d572577e876908b18 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ren=C3=A9=20Kjellerup?= <rk.katana.steel@gmail.com>
-Date: Mon, 1 Oct 2018 15:07:16 -0700
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
-
-It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331
-wireless chipsets. The BCM4331 5GHz chip currently isn't supported only
-due to missing compatible firmware.
-
-Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                      |  1 +
- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 45 +++++++++++++++++++++++++
- 2 files changed, 46 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4708-asus-rt-ac68u.dtb \
- 	bcm4708-buffalo-wzr-1750dhp.dtb \
- 	bcm4708-linksys-ea6300-v1.dtb \
-+	bcm4708-linksys-ea6500-v2.dtb \
- 	bcm4708-luxul-xap-1510.dtb \
- 	bcm4708-luxul-xwc-1000.dtb \
- 	bcm4708-netgear-r6250.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -0,0 +1,45 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "linksys,ea6500-v2", "brcm,bcm4708";
-+	model = "Linksys EA6500 V2";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&usb3_phy {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.19/031-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch b/target/linux/bcm53xx/patches-4.19/031-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch
deleted file mode 100644
index 5f6dd17dc7..0000000000
--- a/target/linux/bcm53xx/patches-4.19/031-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 9994241ac97cb84d1df98fdc172d3cc6b04b11bf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 9 Nov 2018 09:56:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe Northstar pins mux controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This describes hardware & will allow referencing pin functions. The
-first usage is UART1 which allows supporting devices using it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 44 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -37,6 +37,8 @@
- 			reg = <0x0400 0x100>;
- 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&iprocslow>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinmux_uart1>;
- 			status = "disabled";
- 		};
- 	};
-@@ -391,6 +393,48 @@
- 		status = "disabled";
- 	};
- 
-+	dmu@1800c000 {
-+		compatible = "simple-bus";
-+		ranges = <0 0x1800c000 0x1000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		cru@100 {
-+			compatible = "simple-bus";
-+			reg = <0x100 0x1a4>;
-+			ranges;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			pin-controller@1c0 {
-+				compatible = "brcm,bcm4708-pinmux";
-+				reg = <0x1c0 0x24>;
-+				reg-names = "cru_gpio_control";
-+
-+				spi-pins {
-+					groups = "spi_grp";
-+					function = "spi";
-+				};
-+
-+				i2c {
-+					groups = "i2c_grp";
-+					function = "i2c";
-+				};
-+
-+				pwm {
-+					groups = "pwm0_grp", "pwm1_grp",
-+						 "pwm2_grp", "pwm3_grp";
-+					function = "pwm";
-+				};
-+
-+				pinmux_uart1: uart1 {
-+					groups = "uart1_grp";
-+					function = "uart1";
-+				};
-+			};
-+		};
-+	};
-+
- 	lcpll0: lcpll0@1800c100 {
- 		#clock-cells = <1>;
- 		compatible = "brcm,nsp-lcpll0";
diff --git a/target/linux/bcm53xx/patches-4.19/032-v5.1-0001-ARM-dts-BCM53573-Relicense-Luxul-files-to-the-GPL-2..patch b/target/linux/bcm53xx/patches-4.19/032-v5.1-0001-ARM-dts-BCM53573-Relicense-Luxul-files-to-the-GPL-2..patch
deleted file mode 100644
index 5883577d53..0000000000
--- a/target/linux/bcm53xx/patches-4.19/032-v5.1-0001-ARM-dts-BCM53573-Relicense-Luxul-files-to-the-GPL-2..patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From b7f264fa496eb2a6dd1d67dc91dbe8ffcb142487 Mon Sep 17 00:00:00 2001
-From: Dan Haab <riproute@gmail.com>
-Date: Sun, 2 Dec 2018 17:00:15 -0700
-Subject: [PATCH] ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by other BCM53573 files and BCM5301X.
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 3 +--
- arch/arm/boot/dts/bcm47189-luxul-xap-810.dts  | 3 +--
- 2 files changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-  * Copyright 2017 Luxul Inc.
-- *
-- * Licensed under the ISC license.
-  */
- 
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-  * Copyright 2017 Luxul Inc.
-- *
-- * Licensed under the ISC license.
-  */
- 
- /dts-v1/;
diff --git a/target/linux/bcm53xx/patches-4.19/032-v5.1-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Phicomm-K3.patch b/target/linux/bcm53xx/patches-4.19/032-v5.1-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Phicomm-K3.patch
deleted file mode 100644
index 3702dac41c..0000000000
--- a/target/linux/bcm53xx/patches-4.19/032-v5.1-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Phicomm-K3.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 40a17923367118e32e5e413a952736dd83635b32 Mon Sep 17 00:00:00 2001
-From: Hao Dong <halbertdong@gmail.com>
-Date: Sun, 20 Jan 2019 23:33:27 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This router has BCM4709C0 SoC, 128 MiB NAND flash (MX30LF1G18AC-TI),
-512 MiB memory and 3 x LAN and 1 x WAN ports. WiFi chips are
-BCM4366C0 x 2. The router has a small LCD and 3 capactive keys driven by
-a PIC microcontroller, which is in turn wired to UART1 of main board.
-
-Signed-off-by: Hao Dong <halbertdong@gmail.com>
-[rmilecki: drop chosen { }, fix whitespaces, update commit message]
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                |  1 +
- arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 71 +++++++++++++++++++++++
- 2 files changed, 72 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm47094-luxul-xwr-3100.dtb \
- 	bcm47094-luxul-xwr-3150-v1.dtb \
- 	bcm47094-netgear-r8500.dtb \
-+	bcm47094-phicomm-k3.dtb \
- 	bcm94708.dtb \
- 	bcm94709.dtb \
- 	bcm953012er.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -0,0 +1,71 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
-+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
-+	model = "Phicomm K3";
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x18000000>;
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&uart1 {
-+	status = "okay";
-+};
-+
-+&usb3_phy {
-+	status = "okay";
-+};
-+
-+&nandcs {
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x0000000 0x0080000>;
-+			read-only;
-+		};
-+
-+		partition@80000 {
-+			label = "nvram";
-+			reg = <0x0080000 0x0100000>;
-+		};
-+
-+		partition@180000{
-+			label = "phicomm";
-+			reg = <0x0180000 0x0280000>;
-+			read-only;
-+		};
-+
-+		partition@400000 {
-+			label = "firmware";
-+			reg = <0x0400000 0x7C00000>;
-+			compatible = "brcm,trx";
-+		};
-+	};
-+};
diff --git a/target/linux/bcm53xx/patches-4.19/080-v4.20-0001-pinctrl-bcm-add-Northstar-driver.patch b/target/linux/bcm53xx/patches-4.19/080-v4.20-0001-pinctrl-bcm-add-Northstar-driver.patch
deleted file mode 100644
index 44871e29c8..0000000000
--- a/target/linux/bcm53xx/patches-4.19/080-v4.20-0001-pinctrl-bcm-add-Northstar-driver.patch
+++ /dev/null
@@ -1,427 +0,0 @@
-From c12fb1774deaa9c9408b19db8d43d3612f6e47a0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 26 Sep 2018 21:31:03 +0200
-Subject: [PATCH] pinctrl: bcm: add Northstar driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This driver provides support for Northstar mux controller. It differs
-from Northstar Plus one so a new binding and driver were needed.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/bcm/Kconfig      |  13 ++
- drivers/pinctrl/bcm/Makefile     |   1 +
- drivers/pinctrl/bcm/pinctrl-ns.c | 372 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 386 insertions(+)
- create mode 100644 drivers/pinctrl/bcm/pinctrl-ns.c
-
---- a/drivers/pinctrl/bcm/Kconfig
-+++ b/drivers/pinctrl/bcm/Kconfig
-@@ -73,6 +73,19 @@ config PINCTRL_CYGNUS_MUX
- 	  configuration, with the exception that certain individual pins
- 	  can be overridden to GPIO function
- 
-+config PINCTRL_NS
-+	bool "Broadcom Northstar pins driver"
-+	depends on OF && (ARCH_BCM_5301X || COMPILE_TEST)
-+	select PINMUX
-+	select GENERIC_PINCONF
-+	default ARCH_BCM_5301X
-+	help
-+	  Say yes here to enable the Broadcom NS SoC pins driver.
-+
-+	  The Broadcom Northstar pins driver supports muxing multi-purpose pins
-+	  that can be used for various functions (e.g. SPI, I2C, UART) as well
-+	  as GPIOs.
-+
- config PINCTRL_NSP_GPIO
- 	bool "Broadcom NSP GPIO (with PINCONF) driver"
- 	depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST)
---- a/drivers/pinctrl/bcm/Makefile
-+++ b/drivers/pinctrl/bcm/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinct
- obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
- obj-$(CONFIG_PINCTRL_IPROC_GPIO)	+= pinctrl-iproc-gpio.o
- obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
-+obj-$(CONFIG_PINCTRL_NS)		+= pinctrl-ns.o
- obj-$(CONFIG_PINCTRL_NSP_GPIO)		+= pinctrl-nsp-gpio.o
- obj-$(CONFIG_PINCTRL_NS2_MUX)		+= pinctrl-ns2-mux.o
- obj-$(CONFIG_PINCTRL_NSP_MUX)		+= pinctrl-nsp-mux.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm/pinctrl-ns.c
-@@ -0,0 +1,372 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#define FLAG_BCM4708		BIT(1)
-+#define FLAG_BCM4709		BIT(2)
-+#define FLAG_BCM53012		BIT(3)
-+
-+struct ns_pinctrl {
-+	struct device *dev;
-+	unsigned int chipset_flag;
-+	struct pinctrl_dev *pctldev;
-+	void __iomem *base;
-+
-+	struct pinctrl_desc pctldesc;
-+	struct ns_pinctrl_group *groups;
-+	unsigned int num_groups;
-+	struct ns_pinctrl_function *functions;
-+	unsigned int num_functions;
-+};
-+
-+/*
-+ * Pins
-+ */
-+
-+static const struct pinctrl_pin_desc ns_pinctrl_pins[] = {
-+	{ 0, "spi_clk", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 1, "spi_ss", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 2, "spi_mosi", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 3, "spi_miso", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 4, "i2c_scl", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 5, "i2c_sda", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 6, "mdc", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 7, "mdio", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 8, "pwm0", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 9, "pwm1", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 10, "pwm2", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 11, "pwm3", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 12, "uart1_rx", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 13, "uart1_tx", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 14, "uart1_cts", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 15, "uart1_rts", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 16, "uart2_rx", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 17, "uart2_tx", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+/* TODO { ??, "xtal_out", (void *)(FLAG_BCM4709) }, */
-+	{ 22, "sdio_pwr", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+	{ 23, "sdio_en_1p8v", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+};
-+
-+/*
-+ * Groups
-+ */
-+
-+struct ns_pinctrl_group {
-+	const char *name;
-+	const unsigned int *pins;
-+	const unsigned int num_pins;
-+	unsigned int chipsets;
-+};
-+
-+static const unsigned int spi_pins[] = { 0, 1, 2, 3 };
-+static const unsigned int i2c_pins[] = { 4, 5 };
-+static const unsigned int mdio_pins[] = { 6, 7 };
-+static const unsigned int pwm0_pins[] = { 8 };
-+static const unsigned int pwm1_pins[] = { 9 };
-+static const unsigned int pwm2_pins[] = { 10 };
-+static const unsigned int pwm3_pins[] = { 11 };
-+static const unsigned int uart1_pins[] = { 12, 13, 14, 15 };
-+static const unsigned int uart2_pins[] = { 16, 17 };
-+static const unsigned int sdio_pwr_pins[] = { 22 };
-+static const unsigned int sdio_1p8v_pins[] = { 23 };
-+
-+#define NS_GROUP(_name, _pins, _chipsets)		\
-+{							\
-+	.name = _name,					\
-+	.pins = _pins,					\
-+	.num_pins = ARRAY_SIZE(_pins),			\
-+	.chipsets = _chipsets,				\
-+}
-+
-+static const struct ns_pinctrl_group ns_pinctrl_groups[] = {
-+	NS_GROUP("spi_grp", spi_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("i2c_grp", i2c_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("mdio_grp", mdio_pins, FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("pwm0_grp", pwm0_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("pwm1_grp", pwm1_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("pwm2_grp", pwm2_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("pwm3_grp", pwm3_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("uart1_grp", uart1_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("uart2_grp", uart2_pins, FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("sdio_pwr_grp", sdio_pwr_pins, FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_GROUP("sdio_1p8v_grp", sdio_1p8v_pins, FLAG_BCM4709 | FLAG_BCM53012),
-+};
-+
-+/*
-+ * Functions
-+ */
-+
-+struct ns_pinctrl_function {
-+	const char *name;
-+	const char * const *groups;
-+	const unsigned int num_groups;
-+	unsigned int chipsets;
-+};
-+
-+static const char * const spi_groups[] = { "spi_grp" };
-+static const char * const i2c_groups[] = { "i2c_grp" };
-+static const char * const mdio_groups[] = { "mdio_grp" };
-+static const char * const pwm_groups[] = { "pwm0_grp", "pwm1_grp", "pwm2_grp",
-+					   "pwm3_grp" };
-+static const char * const uart1_groups[] = { "uart1_grp" };
-+static const char * const uart2_groups[] = { "uart2_grp" };
-+static const char * const sdio_groups[] = { "sdio_pwr_grp", "sdio_1p8v_grp" };
-+
-+#define NS_FUNCTION(_name, _groups, _chipsets)		\
-+{							\
-+	.name = _name,					\
-+	.groups = _groups,				\
-+	.num_groups = ARRAY_SIZE(_groups),		\
-+	.chipsets = _chipsets,				\
-+}
-+
-+static const struct ns_pinctrl_function ns_pinctrl_functions[] = {
-+	NS_FUNCTION("spi", spi_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_FUNCTION("i2c", i2c_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_FUNCTION("mdio", mdio_groups, FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_FUNCTION("pwm", pwm_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_FUNCTION("uart1", uart1_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_FUNCTION("uart2", uart2_groups, FLAG_BCM4709 | FLAG_BCM53012),
-+	NS_FUNCTION("sdio", sdio_groups, FLAG_BCM4709 | FLAG_BCM53012),
-+};
-+
-+/*
-+ * Groups code
-+ */
-+
-+static int ns_pinctrl_get_groups_count(struct pinctrl_dev *pctrl_dev)
-+{
-+	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+	return ns_pinctrl->num_groups;
-+}
-+
-+static const char *ns_pinctrl_get_group_name(struct pinctrl_dev *pctrl_dev,
-+					     unsigned int selector)
-+{
-+	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+	return ns_pinctrl->groups[selector].name;
-+}
-+
-+static int ns_pinctrl_get_group_pins(struct pinctrl_dev *pctrl_dev,
-+				     unsigned int selector,
-+				     const unsigned int **pins,
-+				     unsigned int *num_pins)
-+{
-+	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+	*pins = ns_pinctrl->groups[selector].pins;
-+	*num_pins = ns_pinctrl->groups[selector].num_pins;
-+
-+	return 0;
-+}
-+
-+static const struct pinctrl_ops ns_pinctrl_ops = {
-+	.get_groups_count = ns_pinctrl_get_groups_count,
-+	.get_group_name = ns_pinctrl_get_group_name,
-+	.get_group_pins = ns_pinctrl_get_group_pins,
-+	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
-+	.dt_free_map = pinconf_generic_dt_free_map,
-+};
-+
-+/*
-+ * Functions code
-+ */
-+
-+static int ns_pinctrl_get_functions_count(struct pinctrl_dev *pctrl_dev)
-+{
-+	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+	return ns_pinctrl->num_functions;
-+}
-+
-+static const char *ns_pinctrl_get_function_name(struct pinctrl_dev *pctrl_dev,
-+						unsigned int selector)
-+{
-+	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+	return ns_pinctrl->functions[selector].name;
-+}
-+
-+static int ns_pinctrl_get_function_groups(struct pinctrl_dev *pctrl_dev,
-+					  unsigned int selector,
-+					  const char * const **groups,
-+					  unsigned * const num_groups)
-+{
-+	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+	*groups = ns_pinctrl->functions[selector].groups;
-+	*num_groups = ns_pinctrl->functions[selector].num_groups;
-+
-+	return 0;
-+}
-+
-+static int ns_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev,
-+			      unsigned int func_select,
-+			      unsigned int grp_select)
-+{
-+	struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+	u32 unset = 0;
-+	u32 tmp;
-+	int i;
-+
-+	for (i = 0; i < ns_pinctrl->groups[grp_select].num_pins; i++) {
-+		int pin_number = ns_pinctrl->groups[grp_select].pins[i];
-+
-+		unset |= BIT(pin_number);
-+	}
-+
-+	tmp = readl(ns_pinctrl->base);
-+	tmp &= ~unset;
-+	writel(tmp, ns_pinctrl->base);
-+
-+	return 0;
-+}
-+
-+static const struct pinmux_ops ns_pinctrl_pmxops = {
-+	.get_functions_count = ns_pinctrl_get_functions_count,
-+	.get_function_name = ns_pinctrl_get_function_name,
-+	.get_function_groups = ns_pinctrl_get_function_groups,
-+	.set_mux = ns_pinctrl_set_mux,
-+};
-+
-+/*
-+ * Controller code
-+ */
-+
-+static struct pinctrl_desc ns_pinctrl_desc = {
-+	.name = "pinctrl-ns",
-+	.pctlops = &ns_pinctrl_ops,
-+	.pmxops = &ns_pinctrl_pmxops,
-+};
-+
-+static const struct of_device_id ns_pinctrl_of_match_table[] = {
-+	{ .compatible = "brcm,bcm4708-pinmux", .data = (void *)FLAG_BCM4708, },
-+	{ .compatible = "brcm,bcm4709-pinmux", .data = (void *)FLAG_BCM4709, },
-+	{ .compatible = "brcm,bcm53012-pinmux", .data = (void *)FLAG_BCM53012, },
-+	{ }
-+};
-+
-+static int ns_pinctrl_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	const struct of_device_id *of_id;
-+	struct ns_pinctrl *ns_pinctrl;
-+	struct pinctrl_desc *pctldesc;
-+	struct pinctrl_pin_desc *pin;
-+	struct ns_pinctrl_group *group;
-+	struct ns_pinctrl_function *function;
-+	struct resource *res;
-+	int i;
-+
-+	ns_pinctrl = devm_kzalloc(dev, sizeof(*ns_pinctrl), GFP_KERNEL);
-+	if (!ns_pinctrl)
-+		return -ENOMEM;
-+	pctldesc = &ns_pinctrl->pctldesc;
-+	platform_set_drvdata(pdev, ns_pinctrl);
-+
-+	/* Set basic properties */
-+
-+	ns_pinctrl->dev = dev;
-+
-+	of_id = of_match_device(ns_pinctrl_of_match_table, dev);
-+	if (!of_id)
-+		return -EINVAL;
-+	ns_pinctrl->chipset_flag = (unsigned int)of_id->data;
-+
-+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+					   "cru_gpio_control");
-+	ns_pinctrl->base = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(ns_pinctrl->base)) {
-+		dev_err(dev, "Failed to map pinctrl regs\n");
-+		return PTR_ERR(ns_pinctrl->base);
-+	}
-+
-+	memcpy(pctldesc, &ns_pinctrl_desc, sizeof(*pctldesc));
-+
-+	/* Set pinctrl properties */
-+
-+	pctldesc->pins = devm_kcalloc(dev, ARRAY_SIZE(ns_pinctrl_pins),
-+				      sizeof(struct pinctrl_pin_desc),
-+				      GFP_KERNEL);
-+	if (!pctldesc->pins)
-+		return -ENOMEM;
-+	for (i = 0, pin = (struct pinctrl_pin_desc *)&pctldesc->pins[0];
-+	     i < ARRAY_SIZE(ns_pinctrl_pins); i++) {
-+		const struct pinctrl_pin_desc *src = &ns_pinctrl_pins[i];
-+		unsigned int chipsets = (unsigned int)src->drv_data;
-+
-+		if (chipsets & ns_pinctrl->chipset_flag) {
-+			memcpy(pin++, src, sizeof(*src));
-+			pctldesc->npins++;
-+		}
-+	}
-+
-+	ns_pinctrl->groups = devm_kcalloc(dev, ARRAY_SIZE(ns_pinctrl_groups),
-+					  sizeof(struct ns_pinctrl_group),
-+					  GFP_KERNEL);
-+	if (!ns_pinctrl->groups)
-+		return -ENOMEM;
-+	for (i = 0, group = &ns_pinctrl->groups[0];
-+	     i < ARRAY_SIZE(ns_pinctrl_groups); i++) {
-+		const struct ns_pinctrl_group *src = &ns_pinctrl_groups[i];
-+
-+		if (src->chipsets & ns_pinctrl->chipset_flag) {
-+			memcpy(group++, src, sizeof(*src));
-+			ns_pinctrl->num_groups++;
-+		}
-+	}
-+
-+	ns_pinctrl->functions = devm_kcalloc(dev,
-+					     ARRAY_SIZE(ns_pinctrl_functions),
-+					     sizeof(struct ns_pinctrl_function),
-+					     GFP_KERNEL);
-+	if (!ns_pinctrl->functions)
-+		return -ENOMEM;
-+	for (i = 0, function = &ns_pinctrl->functions[0];
-+	     i < ARRAY_SIZE(ns_pinctrl_functions); i++) {
-+		const struct ns_pinctrl_function *src = &ns_pinctrl_functions[i];
-+
-+		if (src->chipsets & ns_pinctrl->chipset_flag) {
-+			memcpy(function++, src, sizeof(*src));
-+			ns_pinctrl->num_functions++;
-+		}
-+	}
-+
-+	/* Register */
-+
-+	ns_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, ns_pinctrl);
-+	if (IS_ERR(ns_pinctrl->pctldev)) {
-+		dev_err(dev, "Failed to register pinctrl\n");
-+		return PTR_ERR(ns_pinctrl->pctldev);
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver ns_pinctrl_driver = {
-+	.probe = ns_pinctrl_probe,
-+	.driver = {
-+		.name = "ns-pinmux",
-+		.of_match_table = ns_pinctrl_of_match_table,
-+	},
-+};
-+
-+module_platform_driver(ns_pinctrl_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, ns_pinctrl_of_match_table);
diff --git a/target/linux/bcm53xx/patches-4.19/080-v4.20-0002-pinctrl-bcm-ns-Use-uintptr_t-for-casting-data.patch b/target/linux/bcm53xx/patches-4.19/080-v4.20-0002-pinctrl-bcm-ns-Use-uintptr_t-for-casting-data.patch
deleted file mode 100644
index afaed68d05..0000000000
--- a/target/linux/bcm53xx/patches-4.19/080-v4.20-0002-pinctrl-bcm-ns-Use-uintptr_t-for-casting-data.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From ce7bdb957b8e3f1cbf0a3358f1deef385dff6502 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Oct 2018 13:23:40 +0200
-Subject: [PATCH] pinctrl: bcm: ns: Use uintptr_t for casting data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Fix up a compiler error on 64bit architectures where pointers
-and integers differ in size.
-
-Suggested-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/bcm/pinctrl-ns.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/bcm/pinctrl-ns.c
-+++ b/drivers/pinctrl/bcm/pinctrl-ns.c
-@@ -285,7 +285,7 @@ static int ns_pinctrl_probe(struct platf
- 	of_id = of_match_device(ns_pinctrl_of_match_table, dev);
- 	if (!of_id)
- 		return -EINVAL;
--	ns_pinctrl->chipset_flag = (unsigned int)of_id->data;
-+	ns_pinctrl->chipset_flag = (uintptr_t)of_id->data;
- 
- 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- 					   "cru_gpio_control");
-@@ -307,7 +307,7 @@ static int ns_pinctrl_probe(struct platf
- 	for (i = 0, pin = (struct pinctrl_pin_desc *)&pctldesc->pins[0];
- 	     i < ARRAY_SIZE(ns_pinctrl_pins); i++) {
- 		const struct pinctrl_pin_desc *src = &ns_pinctrl_pins[i];
--		unsigned int chipsets = (unsigned int)src->drv_data;
-+		unsigned int chipsets = (uintptr_t)src->drv_data;
- 
- 		if (chipsets & ns_pinctrl->chipset_flag) {
- 			memcpy(pin++, src, sizeof(*src));
diff --git a/target/linux/bcm53xx/patches-4.19/081-v4.21-0001-pinctrl-bcm-ns-support-updated-DT-binding-as-syscon-.patch b/target/linux/bcm53xx/patches-4.19/081-v4.21-0001-pinctrl-bcm-ns-support-updated-DT-binding-as-syscon-.patch
deleted file mode 100644
index 45595bddc9..0000000000
--- a/target/linux/bcm53xx/patches-4.19/081-v4.21-0001-pinctrl-bcm-ns-support-updated-DT-binding-as-syscon-.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From a49d784d5a8272d0f63c448fe8dc69e589db006e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 18 Dec 2018 16:58:08 +0100
-Subject: [PATCH] pinctrl: bcm: ns: support updated DT binding as syscon
- subnode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Documentation has been recently updated specifying that pinctrl should
-be subnode of the CRU "syscon". Support that by using parent node for
-regmap and reading "offset" property from the DT.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/bcm/pinctrl-ns.c | 29 +++++++++++++++++++----------
- 1 file changed, 19 insertions(+), 10 deletions(-)
-
---- a/drivers/pinctrl/bcm/pinctrl-ns.c
-+++ b/drivers/pinctrl/bcm/pinctrl-ns.c
-@@ -5,6 +5,7 @@
- 
- #include <linux/err.h>
- #include <linux/io.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -12,6 +13,7 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/pinctrl/pinmux.h>
- #include <linux/platform_device.h>
-+#include <linux/regmap.h>
- #include <linux/slab.h>
- 
- #define FLAG_BCM4708		BIT(1)
-@@ -22,7 +24,8 @@ struct ns_pinctrl {
- 	struct device *dev;
- 	unsigned int chipset_flag;
- 	struct pinctrl_dev *pctldev;
--	void __iomem *base;
-+	struct regmap *regmap;
-+	u32 offset;
- 
- 	struct pinctrl_desc pctldesc;
- 	struct ns_pinctrl_group *groups;
-@@ -229,9 +232,9 @@ static int ns_pinctrl_set_mux(struct pin
- 		unset |= BIT(pin_number);
- 	}
- 
--	tmp = readl(ns_pinctrl->base);
-+	regmap_read(ns_pinctrl->regmap, ns_pinctrl->offset, &tmp);
- 	tmp &= ~unset;
--	writel(tmp, ns_pinctrl->base);
-+	regmap_write(ns_pinctrl->regmap, ns_pinctrl->offset, tmp);
- 
- 	return 0;
- }
-@@ -263,13 +266,13 @@ static const struct of_device_id ns_pinc
- static int ns_pinctrl_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-+	struct device_node *np = dev->of_node;
- 	const struct of_device_id *of_id;
- 	struct ns_pinctrl *ns_pinctrl;
- 	struct pinctrl_desc *pctldesc;
- 	struct pinctrl_pin_desc *pin;
- 	struct ns_pinctrl_group *group;
- 	struct ns_pinctrl_function *function;
--	struct resource *res;
- 	int i;
- 
- 	ns_pinctrl = devm_kzalloc(dev, sizeof(*ns_pinctrl), GFP_KERNEL);
-@@ -287,12 +290,18 @@ static int ns_pinctrl_probe(struct platf
- 		return -EINVAL;
- 	ns_pinctrl->chipset_flag = (uintptr_t)of_id->data;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
--					   "cru_gpio_control");
--	ns_pinctrl->base = devm_ioremap_resource(dev, res);
--	if (IS_ERR(ns_pinctrl->base)) {
--		dev_err(dev, "Failed to map pinctrl regs\n");
--		return PTR_ERR(ns_pinctrl->base);
-+	ns_pinctrl->regmap = syscon_node_to_regmap(of_get_parent(np));
-+	if (IS_ERR(ns_pinctrl->regmap)) {
-+		int err = PTR_ERR(ns_pinctrl->regmap);
-+
-+		dev_err(dev, "Failed to map pinctrl regs: %d\n", err);
-+
-+		return err;
-+	}
-+
-+	if (of_property_read_u32(np, "offset", &ns_pinctrl->offset)) {
-+		dev_err(dev, "Failed to get register offset\n");
-+		return -ENOENT;
- 	}
- 
- 	memcpy(pctldesc, &ns_pinctrl_desc, sizeof(*pctldesc));
diff --git a/target/linux/bcm53xx/patches-4.19/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.19/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
deleted file mode 100644
index 6bd99b7486..0000000000
--- a/target/linux/bcm53xx/patches-4.19/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c |  6 +++++
- drivers/usb/host/xhci.c      | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h      |  1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -65,12 +65,18 @@ static int xhci_priv_resume_quirk(struct
- 
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
-+	struct platform_device	*pdev = to_platform_device(dev);
-+	struct device_node	*node = pdev->dev.of_node;
-+
- 	/*
- 	 * As of now platform drivers don't provide MSI support so we ensure
- 	 * here that the generic code does not try to make a pci_dev from our
- 	 * dev struct in order to setup MSI
- 	 */
- 	xhci->quirks |= XHCI_PLAT;
-+
-+	if (node && of_machine_is_compatible("brcm,bcm4708"))
-+		xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
- 
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -158,6 +158,49 @@ int xhci_start(struct xhci_hcd *xhci)
- 	return ret;
- }
- 
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+	u32 temp;
-+
-+	/* Alloc a virt device for that slot */
-+	if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* Ring fake doorbell for slot_id ep 0 */
-+	xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+	usleep_range(1000, 1500);
-+
-+	/* Read the status to check if HSE is set or not */
-+	temp = readl(&xhci->op_regs->status);
-+
-+	/* Clear HSE if set */
-+	if (temp & STS_FATAL) {
-+		xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+		temp &= ~0x1fff;
-+		temp |= STS_FATAL;
-+		writel(temp, &xhci->op_regs->status);
-+		usleep_range(1000, 1500);
-+		readl(&xhci->op_regs->status);
-+	}
-+
-+	/* Free virt device */
-+	xhci_free_virt_device(xhci, slot_id);
-+
-+	/* We're done if controller is already running */
-+	if (readl(&xhci->op_regs->command) & CMD_RUN)
-+		return 0;
-+
-+	return xhci_start(xhci);
-+}
-+
- /*
-  * Reset a halted HC.
-  *
-@@ -605,10 +648,20 @@ static int xhci_init(struct usb_hcd *hcd
- 
- static int xhci_run_finished(struct xhci_hcd *xhci)
- {
--	if (xhci_start(xhci)) {
--		xhci_halt(xhci);
--		return -ENODEV;
-+	int err;
-+
-+	err = xhci_start(xhci);
-+	if (err) {
-+		err = -ENODEV;
-+		goto err_halt;
- 	}
-+
-+	if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+		err = xhci_fake_doorbell(xhci, 1);
-+		if (err)
-+			goto err_halt;
-+	}
-+
- 	xhci->shared_hcd->state = HC_STATE_RUNNING;
- 	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
- 
-@@ -618,6 +671,10 @@ static int xhci_run_finished(struct xhci
- 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- 			"Finished xhci_run for USB3 roothub");
- 	return 0;
-+
-+err_halt:
-+	xhci_halt(xhci);
-+	return err;
- }
- 
- /*
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1856,6 +1856,7 @@ struct xhci_hcd {
- #define XHCI_ZERO_64B_REGS	BIT_ULL(32)
- #define XHCI_RESET_PLL_ON_DISCONNECT	BIT_ULL(34)
- #define XHCI_SNPS_BROKEN_SUSPEND    BIT_ULL(35)
-+#define XHCI_FAKE_DOORBELL	BIT_ULL(36)
- 
- 	unsigned int		num_active_eps;
- 	unsigned int		limit_active_eps;
diff --git a/target/linux/bcm53xx/patches-4.19/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-4.19/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
deleted file mode 100644
index 034d5b52fc..0000000000
--- a/target/linux/bcm53xx/patches-4.19/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M    (1 << 0)        /* MMU enable */
-#define CR_C    (1 << 2)        /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS		+= ll_char_wr.o font.o
- endif
- 
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS		+= head-bcm_5301x-mpcore.o
-+OBJS		+= cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS		+= head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks.  This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+		.section        ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+	@ Preserve r8/r7 i.e. kernel entry values
-+	mov	r12, r8
-+
-+	@ Clear MMU enable and Dcache enable bits
-+	mrc	p15, 0, r0, c1, c0, 0		@ Read SCTLR
-+	bic	r0, #CR_C|CR_M
-+	mcr	p15, 0, r0, c1, c0, 0		@ Write SCTLR
-+	nop
-+
-+	@ Call the cache invalidation routine
-+	bl	v7_flush_dcache_all
-+	nop
-+	mov	r0,#0
-+	ldr	r3, =0x19022000			@ L2 cache controller, control reg
-+	str	r0, [r3, #0x100]		@ Disable L2 cache
-+	nop
-+
-+	@ Restore
-+	mov	r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
- 
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
- 
- 	__INIT
- 
-@@ -63,7 +64,7 @@ loop2:
-  ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
-  THUMB(	lsl	r6, r9, r2		)
-  THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
--	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
-+	mcr     p15, 0, r11, c7, c6, 2		@ clean & invalidate by set/way
- 	subs	r9, r9, #1			@ decrement the index
- 	bge	loop2
- 	subs	r4, r4, #1			@ decrement the way
diff --git a/target/linux/bcm53xx/patches-4.19/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch b/target/linux/bcm53xx/patches-4.19/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch
deleted file mode 100644
index d1d287588c..0000000000
--- a/target/linux/bcm53xx/patches-4.19/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Update Northstar pinctrl binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -400,16 +400,12 @@
- 		#size-cells = <1>;
- 
- 		cru@100 {
--			compatible = "simple-bus";
-+			compatible = "syscon", "simple-mfd";
- 			reg = <0x100 0x1a4>;
--			ranges;
--			#address-cells = <1>;
--			#size-cells = <1>;
- 
--			pin-controller@1c0 {
-+			pinctrl {
- 				compatible = "brcm,bcm4708-pinmux";
--				reg = <0x1c0 0x24>;
--				reg-names = "cru_gpio_control";
-+				offset = <0xc0>;
- 
- 				spi-pins {
- 					groups = "spi_grp";
diff --git a/target/linux/bcm53xx/patches-4.19/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.19/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
deleted file mode 100644
index fca2b88ed8..0000000000
--- a/target/linux/bcm53xx/patches-4.19/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-buffalo-wxr-1900dhp.dtb \
- 	bcm4709-linksys-ea9200.dtb \
- 	bcm4709-netgear-r7000.dtb \
-+	bcm4709-netgear-r7900.dtb \
- 	bcm4709-netgear-r8000.dtb \
- 	bcm4709-tplink-archer-c9-v1.dtb \
- 	bcm47094-dlink-dir-885l.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+	model = "Netgear R7900";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
-+	};
-+
-+	axi@18000000 {
-+		usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.19/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.19/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
deleted file mode 100644
index 5ebc7f89f2..0000000000
--- a/target/linux/bcm53xx/patches-4.19/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -101,6 +101,12 @@
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
-+		power {
-+			label = "Power";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+		};
-+
- 		restart {
- 			label = "Reset";
- 			linux,code = <KEY_RESTART>;
diff --git a/target/linux/bcm53xx/patches-4.19/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch b/target/linux/bcm53xx/patches-4.19/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
deleted file mode 100644
index 65f9a52907..0000000000
--- a/target/linux/bcm53xx/patches-4.19/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's enough to have proper stdout-path for getting serial working but
-for some reason LEDE doesn't offer "Please press Enter to activate this
-console." unless ttyS0 is specified.
-
-This is a workaround to get serial working in LEDE.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -12,7 +12,7 @@
- 	model = "TP-LINK Archer C5 V2";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -13,7 +13,7 @@
- 	model = "Luxul ABR-4500 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -13,7 +13,7 @@
- 	model = "Luxul XBR-4500 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -12,7 +12,7 @@
- 	model = "Luxul XAP-1440 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -12,7 +12,7 @@
- 	model = "Luxul XAP-810 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -12,7 +12,7 @@
- 	model = "Luxul XAP-1610 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 	earlycon";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -13,7 +13,7 @@
- 	model = "Luxul XWR-3150 V1";
- 
- 	chosen {
--		bootargs = "earlycon";
-+		bootargs = "console=ttyS0,115200 earlycon";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -13,6 +13,10 @@
- 	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
- 	model = "Phicomm K3";
- 
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
- 	memory {
- 		reg = <0x00000000 0x08000000
- 		       0x88000000 0x18000000>;
diff --git a/target/linux/bcm53xx/patches-4.19/321-ARM-dts-BCM5301X-Describe-partition-formats.patch b/target/linux/bcm53xx/patches-4.19/321-ARM-dts-BCM5301X-Describe-partition-formats.patch
deleted file mode 100644
index 66ae6dca33..0000000000
--- a/target/linux/bcm53xx/patches-4.19/321-ARM-dts-BCM5301X-Describe-partition-formats.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 22 Nov 2018 09:21:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's needed by OpenWrt for custom partitioning.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -34,6 +34,7 @@
- 				partition@0 {
- 					label = "firmware";
- 					reg = <0x00000000 0x08000000>;
-+					compatible = "seama";
- 				};
- 			};
- 		};
diff --git a/target/linux/bcm53xx/patches-4.19/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch b/target/linux/bcm53xx/patches-4.19/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch
deleted file mode 100644
index b05749f72d..0000000000
--- a/target/linux/bcm53xx/patches-4.19/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: spi-nor: detect JEDEC incompatible w25q128 using 0x90
- command
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some w25q128 chipsets don't support RDID (0x9f) command, they reply with
-0xff-s only. To suppose such flashes fallback to the 0x90 command.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1295,6 +1295,18 @@ static const struct flash_info *spi_nor_
- 	}
- 	dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
- 		id[0], id[1], id[2]);
-+
-+	tmp = nor->read_reg(nor, 0x90, id, SPI_NOR_MAX_ID_LEN);
-+	if (tmp < 0) {
-+		dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
-+		return ERR_PTR(tmp);
-+	}
-+	dev_info(nor->dev, "using Read Manufacturer / Device ID command (0x%02x) returned %02x %02x\n",
-+		 0x90, id[0x03], id[0x04]);
-+	if (id[0x03] == 0xef && id[0x04] == 0x17) {
-+		return spi_nor_match_id("w25q128");
-+	}
-+
- 	return ERR_PTR(-ENODEV);
- }
- 
diff --git a/target/linux/bcm53xx/patches-4.19/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-4.19/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
deleted file mode 100644
index 6d7a45f7ba..0000000000
--- a/target/linux/bcm53xx/patches-4.19/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c     | 4 ++++
- drivers/mtd/ubi/ubi.h    | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi
- #define AV_ADD		BIT(1)
- #define AV_FIND_OR_ADD	(AV_FIND | AV_ADD)
- 
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
-  * find_or_add_av - internal function to find a volume, add a volume or do
-  *		    both (find and add if missing).
-@@ -1592,6 +1595,8 @@ int ubi_attach(struct ubi_device *ubi, i
- 	if (!ai)
- 		return -ENOMEM;
- 
-+	erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- 	/* On small flash devices we disable fastmap in any case. */
- 	if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -723,6 +723,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- 	}
- 
- 	magic = be32_to_cpu(ec_hdr->magic);
-+	if (magic == 0xdeadc0de)
-+		erase_all_next = true;
-+	if (erase_all_next)
-+		return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- 	if (magic != UBI_EC_HDR_MAGIC) {
- 		if (mtd_is_eccerr(read_err))
- 			return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -833,6 +833,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
- 
- /* attach.c */
-+extern bool erase_all_next;
- struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
- 				   int ec);
- void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);
diff --git a/target/linux/bcm53xx/patches-4.19/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-4.19/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
deleted file mode 100644
index 91bb4fae11..0000000000
--- a/target/linux/bcm53xx/patches-4.19/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 May 2015 14:13:28 +0200
-Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/net/phy/b53/b53_common.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/b53/b53_common.c
-+++ b/drivers/net/phy/b53/b53_common.c
-@@ -28,6 +28,7 @@
- #include <linux/of.h>
- #include <linux/of_net.h>
- #include <linux/platform_data/b53.h>
-+#include <linux/of.h>
- 
- #include "b53_regs.h"
- #include "b53_priv.h"
-@@ -1579,6 +1580,28 @@ static int b53_switch_init(struct b53_de
- 			return ret;
- 	}
- 
-+	/* Set correct CPU port */
-+	if (of_machine_is_compatible("asus,rt-ac87u"))
-+		sw_dev->cpu_port = 7;
-+	else if (of_machine_is_compatible("netgear,r7900"))
-+		sw_dev->cpu_port = 8;
-+	else if (of_machine_is_compatible("netgear,r8000"))
-+		sw_dev->cpu_port = 8;
-+	else if (of_machine_is_compatible("netgear,r8500"))
-+		sw_dev->cpu_port = 8;
-+
-+	/* Enable extra ports */
-+	if (of_machine_is_compatible("tenda,ac9"))
-+		dev->enabled_ports |= BIT(5);
-+
-+	/*
-+	 * Workaround for devices using port 8 (connected to the 3rd iface).
-+	 * For some reason it doesn't work (no packets on eth2).
-+	 */
-+	if (of_machine_is_compatible("netgear,r7900") ||
-+	    of_machine_is_compatible("netgear,r8000"))
-+		sw_dev->cpu_port = 5;
-+
- 	dev->enabled_ports |= BIT(sw_dev->cpu_port);
- 	sw_dev->ports = fls(dev->enabled_ports);
- 
diff --git a/target/linux/bcm53xx/patches-4.19/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-4.19/905-BCM53573-minor-hacks.patch
deleted file mode 100644
index 470b17a5ff..0000000000
--- a/target/linux/bcm53xx/patches-4.19/905-BCM53573-minor-hacks.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -53,6 +53,7 @@
- 			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-+		clocks = <&ilp>;
- 	};
- 
- 	clocks {
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -330,14 +330,6 @@ static int bcma_register_devices(struct
- 	}
- #endif
- 
--#ifdef CONFIG_BCMA_SFLASH
--	if (bus->drv_cc.sflash.present) {
--		err = platform_device_register(&bcma_sflash_dev);
--		if (err)
--			bcma_err(bus, "Error registering serial flash\n");
--	}
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- 	if (bus->drv_cc.nflash.present) {
- 		err = platform_device_register(&bcma_nflash_dev);
-@@ -415,6 +407,14 @@ int bcma_bus_register(struct bcma_bus *b
- 			bcma_register_core(bus, core);
- 	}
- 
-+#ifdef CONFIG_BCMA_SFLASH
-+	if (bus->drv_cc.sflash.present) {
-+		err = platform_device_register(&bcma_sflash_dev);
-+		if (err)
-+			bcma_err(bus, "Error registering serial flash\n");
-+	}
-+#endif
-+
- 	/* Try to get SPROM */
- 	err = bcma_sprom_get(bus);
- 	if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -17,6 +17,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/interrupt.h>
-@@ -919,6 +920,16 @@ static void arch_timer_of_configure_rate
- 	if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- 		arch_timer_rate = rate;
- 
-+	/* Get clk rate through clk driver if present */
-+	if (!arch_timer_rate) {
-+		struct clk *clk = of_clk_get(np, 0);
-+
-+		if (!IS_ERR(clk)) {
-+			if (!clk_prepare_enable(clk))
-+				arch_timer_rate = clk_get_rate(clk);
-+		}
-+	}
-+
- 	/* Check the timer frequency. */
- 	if (arch_timer_rate == 0)
- 		pr_warn("frequency not available\n");
diff --git a/target/linux/brcm47xx/Makefile b/target/linux/brcm47xx/Makefile
index b991770e12..af91d8bada 100644
--- a/target/linux/brcm47xx/Makefile
+++ b/target/linux/brcm47xx/Makefile
@@ -14,7 +14,6 @@ SUBTARGETS:=generic mips74k legacy
 MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 define Target/Description
 	Build firmware images for Broadcom based BCM47xx/53xx routers with MIPS CPU, *not* ARM.
diff --git a/target/linux/brcm47xx/patches-4.19/030-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch b/target/linux/brcm47xx/patches-4.19/030-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch
deleted file mode 100644
index c824e28317..0000000000
--- a/target/linux/brcm47xx/patches-4.19/030-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From feef7918667b84f9d5653c501542dd8d84ae32af Mon Sep 17 00:00:00 2001
-From: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-Date: Sun, 19 Aug 2018 22:20:23 +0300
-Subject: [PATCH] MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Setting GPIO 21 high seems to be required to enable power to USB ports
-on the WNDR3400v3. As there is already similar code for WNR3500L,
-make the existing USB power GPIO code generic and use that.
-
-Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
-Patchwork: https://patchwork.linux-mips.org/patch/20259/
-Cc: Rafał Miłecki <zajec5@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: linux-kernel@vger.kernel.org
----
- arch/mips/bcm47xx/workarounds.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm47xx/workarounds.c
-+++ b/arch/mips/bcm47xx/workarounds.c
-@@ -5,9 +5,8 @@
- #include <bcm47xx_board.h>
- #include <bcm47xx.h>
- 
--static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
-+static void __init bcm47xx_workarounds_enable_usb_power(int usb_power)
- {
--	const int usb_power = 12;
- 	int err;
- 
- 	err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
-@@ -23,7 +22,10 @@ void __init bcm47xx_workarounds(void)
- 
- 	switch (board) {
- 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
--		bcm47xx_workarounds_netgear_wnr3500l();
-+		bcm47xx_workarounds_enable_usb_power(12);
-+		break;
-+	case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
-+		bcm47xx_workarounds_enable_usb_power(21);
- 		break;
- 	default:
- 		/* No workaround(s) needed */
diff --git a/target/linux/brcm47xx/patches-4.19/031-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch b/target/linux/brcm47xx/patches-4.19/031-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch
deleted file mode 100644
index 34a79f9d5b..0000000000
--- a/target/linux/brcm47xx/patches-4.19/031-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From cdb8faa00e3fcdd0ad10add743516d616dc7d38e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Mon, 11 Mar 2019 22:08:22 +0100
-Subject: [PATCH] mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Eric has reported on OpenWrt's bug tracking system[1], that he's not
-able to use USB devices on his WNDR3400v2 device after the boot, until
-he turns on GPIO #21 manually through sysfs.
-
-1. https://bugs.openwrt.org/index.php?do=details&task_id=2170
-
-Cc: Rafał Miłecki <zajec5@gmail.com>
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Reported-by: Eric Bohlman <ericbohlman@gmail.com>
-Tested-by: Eric Bohlman <ericbohlman@gmail.com>
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
----
- arch/mips/bcm47xx/workarounds.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm47xx/workarounds.c
-+++ b/arch/mips/bcm47xx/workarounds.c
-@@ -24,6 +24,7 @@ void __init bcm47xx_workarounds(void)
- 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
- 		bcm47xx_workarounds_enable_usb_power(12);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_WNDR3400V2:
- 	case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
- 		bcm47xx_workarounds_enable_usb_power(21);
- 		break;
diff --git a/target/linux/brcm47xx/patches-4.19/159-cpu_fixes.patch b/target/linux/brcm47xx/patches-4.19/159-cpu_fixes.patch
deleted file mode 100644
index 68fdc50664..0000000000
--- a/target/linux/brcm47xx/patches-4.19/159-cpu_fixes.patch
+++ /dev/null
@@ -1,510 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -26,6 +26,38 @@
- extern void (*r4k_blast_dcache)(void);
- extern void (*r4k_blast_icache)(void);
- 
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+      return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+      unsigned long x;
-+      get_dbe(x, (unsigned long *)addr);;
-+}
-+
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
-  * This macro return a properly sign-extended address suitable as base address
-  * for indexed cache operations.  Two issues here:
-@@ -99,6 +131,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Index_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -126,6 +159,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -133,6 +167,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Invalidate_D, addr);
- 	__dflush_epilogue
- }
-@@ -206,6 +241,7 @@ static inline int protected_flush_icache
- #ifdef CONFIG_EVA
- 		return protected_cachee_op(Hit_Invalidate_I, addr);
- #else
-+		BCM4710_DUMMY_RREG();
- 		return protected_cache_op(Hit_Invalidate_I, addr);
- #endif
- 	}
-@@ -219,6 +255,7 @@ static inline int protected_flush_icache
-  */
- static inline int protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- #ifdef CONFIG_EVA
- 	return protected_cachee_op(Hit_Writeback_Inv_D, addr);
- #else
-@@ -576,8 +613,51 @@ static inline void invalidate_tcache_pag
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Hit_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_op(Index_Writeback_Inv_D, addr);
-+		}
-+	}
-+}
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra)	\
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
- static inline void extra##blast_##pfx##cache##lsize(void)		\
- {									\
- 	unsigned long start = INDEX_BASE;				\
-@@ -589,6 +669,7 @@ static inline void extra##blast_##pfx##c
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws, indexop);	\
-@@ -603,6 +684,7 @@ static inline void extra##blast_##pfx##c
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	do {								\
- 		cache##lsize##_unroll32(start, hitop);			\
- 		start += lsize * 32;					\
-@@ -621,6 +703,8 @@ static inline void extra##blast_##pfx##c
- 			       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
-+									\
- 	__##pfx##flush_prologue						\
- 									\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
-@@ -630,26 +714,26 @@ static inline void extra##blast_##pfx##c
- 	__##pfx##flush_epilogue						\
- }
- 
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
- 
- #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
- static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
-@@ -678,53 +762,23 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
- __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
- 
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)	\
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2)	\
- static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
--	unsigned long lsize_2 = lsize * 2;				\
--	unsigned long lsize_3 = lsize * 3;				\
--	unsigned long lsize_4 = lsize * 4;				\
--	unsigned long lsize_5 = lsize * 5;				\
--	unsigned long lsize_6 = lsize * 6;				\
--	unsigned long lsize_7 = lsize * 7;				\
--	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
--	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
--	int lines = (aend - addr) / lsize;				\
-+	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	war								\
- 									\
- 	__##pfx##flush_prologue						\
- 									\
--	while (lines >= 8) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		prot##cache_op(hitop, addr + lsize_2);			\
--		prot##cache_op(hitop, addr + lsize_3);			\
--		prot##cache_op(hitop, addr + lsize_4);			\
--		prot##cache_op(hitop, addr + lsize_5);			\
--		prot##cache_op(hitop, addr + lsize_6);			\
--		prot##cache_op(hitop, addr + lsize_7);			\
--		addr += lsize_8;					\
--		lines -= 8;						\
--	}								\
--									\
--	if (lines & 0x4) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		prot##cache_op(hitop, addr + lsize_2);			\
--		prot##cache_op(hitop, addr + lsize_3);			\
--		addr += lsize_4;					\
--	}								\
--									\
--	if (lines & 0x2) {						\
--		prot##cache_op(hitop, addr);				\
--		prot##cache_op(hitop, addr + lsize);			\
--		addr += lsize_2;					\
--	}								\
--									\
--	if (lines & 0x1) {						\
-+	while (1) {							\
-+		war2							\
- 		prot##cache_op(hitop, addr);				\
-+		if (addr == aend)					\
-+			break;						\
-+		addr += lsize;						\
- 	}								\
- 									\
- 	__##pfx##flush_epilogue						\
-@@ -732,8 +786,8 @@ static inline void prot##extra##blast_##
- 
- #ifndef CONFIG_EVA
- 
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
- 
- #else
- 
-@@ -770,15 +824,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
- __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
- 
- #endif
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
- __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
--	protected_, loongson2_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
-+	protected_, loongson2_, , )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
- 
- /* Currently, this is very specific to Loongson-3 */
- #define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize)	\
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -428,6 +428,10 @@
- 		eretnc
- #else
- 		.set	arch=r4000
-+#ifdef CONFIG_BCM47XX
-+		nop
-+		nop
-+#endif
- 		eret
- 		.set	mips0
- #endif
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -21,6 +21,19 @@
- #include <asm/war.h>
- #include <asm/thread_info.h>
- 
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+#  undef eret
-+# endif
-+# define eret 					\
-+	.set push;				\
-+	.set noreorder;				\
-+	 nop; 					\
-+	 nop;					\
-+	 eret;					\
-+	.set pop;
-+#endif
-+
- 	__INIT
- 
- /*
-@@ -32,6 +45,9 @@
- NESTED(except_vec3_generic, 0, sp)
- 	.set	push
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- 	mfc0	k0, CP0_INDEX
- #endif
-@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp)
- 	.set	push
- 	.set	arch=r4000
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	li	k0, 31<<2
- 	andi	k1, k1, 0x7c
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -39,6 +39,9 @@
- #include <asm/dma-coherence.h>
- #include <asm/mips-cps.h>
- 
-+/* For enabling BCM4710 cache workarounds */
-+static int bcm4710 = 0;
-+
- /*
-  * Bits describing what cache ops an SMP callback function may perform.
-  *
-@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
- {
- 	unsigned long  dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_user_page = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -986,6 +998,8 @@ static void local_r4k_flush_cache_sigtra
- 	}
- 
- 	R4600_HIT_CACHEOP_WAR_IMPL;
-+	BCM4710_PROTECTED_FILL_TLB(addr);
-+	BCM4710_PROTECTED_FILL_TLB(addr + 4);
- 	if (!cpu_has_ic_fills_f_dc) {
- 		if (dc_lsize)
- 			vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1))
-@@ -1888,6 +1902,17 @@ static void coherency_setup(void)
- 	 * silly idea of putting something else there ...
- 	 */
- 	switch (current_cpu_type()) {
-+	case CPU_BMIPS3300:
-+		{
-+			u32 cm;
-+			cm = read_c0_diag();
-+			/* Enable icache */
-+			cm |= (1 << 31);
-+			/* Enable dcache */
-+			cm |= (1 << 30);
-+			write_c0_diag(cm);
-+		}
-+		break;
- 	case CPU_R4000PC:
- 	case CPU_R4000SC:
- 	case CPU_R4000MC:
-@@ -1934,6 +1959,15 @@ void r4k_cache_init(void)
- 	extern void build_copy_page(void);
- 	struct cpuinfo_mips *c = &current_cpu_data;
- 
-+	/* Check if special workarounds are required */
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+	if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+#endif
-+		bcm4710 = 0;
-+
- 	probe_pcache();
- 	probe_vcache();
- 	setup_scache();
-@@ -2012,7 +2046,15 @@ void r4k_cache_init(void)
- 	 */
- 	local_r4k___flush_cache_all(NULL);
- 
-+#ifdef CONFIG_BCM47XX
-+	{
-+		static void (*_coherency_setup)(void);
-+		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+		_coherency_setup();
-+	}
-+#else
- 	coherency_setup();
-+#endif
- 	board_cache_error_setup = r4k_cache_error_setup;
- 
- 	/*
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -967,6 +967,9 @@ void build_get_pgde32(u32 **p, unsigned
- 		uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
- 		uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(p);
-+#endif
- 		UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- 		uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1327,6 +1330,9 @@ static void build_r4000_tlb_refill_handl
- #ifdef CONFIG_64BIT
- 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+# endif
- 		build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
- 
-@@ -1338,6 +1344,9 @@ static void build_r4000_tlb_refill_handl
- 		build_update_entries(&p, K0, K1);
- 		build_tlb_write_entry(&p, &l, &r, tlb_random);
- 		uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+#endif
- 		uasm_i_eret(&p); /* return from trap */
- 	}
- #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-@@ -2028,6 +2037,9 @@ build_r4000_tlbchange_handler_head(u32 *
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+# endif
- 	build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
- #endif
- 
-@@ -2074,6 +2086,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- 	build_tlb_write_entry(p, l, r, tlb_indexed);
- 	uasm_l_leave(l, *p);
- 	build_restore_work_registers(p);
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- 	uasm_i_eret(p); /* return from trap */
- 
- #ifdef CONFIG_64BIT
diff --git a/target/linux/brcm47xx/patches-4.19/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-4.19/160-kmap_coherent.patch
deleted file mode 100644
index db5660bc32..0000000000
--- a/target/linux/brcm47xx/patches-4.19/160-kmap_coherent.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] kmap_coherent
-
-On ASUS WL-500gP there are some "Data bus error"s when executing simple
-commands liks "ps" or "cat /proc/1/cmdline".
-
-This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
----
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -226,6 +226,9 @@
- #ifndef cpu_has_local_ebase
- #define cpu_has_local_ebase	1
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
- 
- /*
-  * I-Cache snoops remote store.	 This only matters on SMP.  Some multiprocessors
---- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -80,4 +80,6 @@
- #define cpu_scache_line_size()		0
- #define cpu_has_vz			0
- 
-+#define cpu_use_kmap_coherent		0
-+
- #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -694,7 +694,7 @@ static inline void local_r4k_flush_cache
- 		map_coherent = (cpu_has_dc_aliases &&
- 				page_mapcount(page) &&
- 				!Page_dcache_dirty(page));
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			vaddr = kmap_coherent(page, addr);
- 		else
- 			vaddr = kmap_atomic(page);
-@@ -719,7 +719,7 @@ static inline void local_r4k_flush_cache
- 	}
- 
- 	if (vaddr) {
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			kunmap_coherent();
- 		else
- 			kunmap_atomic(vaddr);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -168,7 +168,7 @@ void copy_user_highpage(struct page *to,
- 	void *vfrom, *vto;
- 
- 	vto = kmap_atomic(to);
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(from) && !Page_dcache_dirty(from)) {
- 		vfrom = kmap_coherent(from, vaddr);
- 		copy_page(vto, vfrom);
-@@ -190,7 +190,7 @@ void copy_to_user_page(struct vm_area_st
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(page) && !Page_dcache_dirty(page)) {
- 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(vto, src, len);
-@@ -208,7 +208,7 @@ void copy_from_user_page(struct vm_area_
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(page) && !Page_dcache_dirty(page)) {
- 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(dst, vfrom, len);
diff --git a/target/linux/brcm47xx/patches-4.19/209-b44-register-adm-switch.patch b/target/linux/brcm47xx/patches-4.19/209-b44-register-adm-switch.patch
deleted file mode 100644
index 3706591b00..0000000000
--- a/target/linux/brcm47xx/patches-4.19/209-b44-register-adm-switch.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 9 Nov 2013 17:03:59 +0100
-Subject: [PATCH 210/210] b44: register adm switch
-
----
- drivers/net/ethernet/broadcom/b44.c |   57 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/b44.h |    3 ++
- 2 files changed, 60 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/slab.h>
- #include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/adm6996-gpio.h>
- 
- #include <linux/uaccess.h>
- #include <asm/io.h>
-@@ -2246,6 +2248,69 @@ static void b44_adjust_link(struct net_d
- 	}
- }
- 
-+#ifdef CONFIG_BCM47XX
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+	int gpio;
-+	struct platform_device *pdev;
-+	struct adm6996_gpio_platform_data adm_data = {0};
-+	struct platform_device_info info = {0};
-+
-+	adm_data.model = ADM6996L;
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
-+	if (gpio >= 0)
-+		adm_data.eecs = gpio;
-+	else
-+		adm_data.eecs = 2;
-+
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
-+	if (gpio >= 0)
-+		adm_data.eesk = gpio;
-+	else
-+		adm_data.eesk = 3;
-+
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
-+	if (gpio >= 0)
-+		adm_data.eedi = gpio;
-+	else
-+		adm_data.eedi = 4;
-+
-+	/*
-+	 * We ignore the "adm_rc" GPIO here. The driver does not use it,
-+	 * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
-+	 */
-+
-+	info.parent = bp->sdev->dev;
-+	info.name = "adm6996_gpio";
-+	info.id = -1;
-+	info.data = &adm_data;
-+	info.size_data = sizeof(adm_data);
-+
-+	if (!bp->adm_switch) {
-+		pdev = platform_device_register_full(&info);
-+		if (IS_ERR(pdev))
-+			return PTR_ERR(pdev);
-+
-+		bp->adm_switch = pdev;
-+	}
-+	return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+	if (bp->adm_switch)
-+		platform_device_unregister(bp->adm_switch);
-+}
-+#else
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+	return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+
-+}
-+#endif /* CONFIG_BCM47XX */
-+
- static int b44_register_phy_one(struct b44 *bp)
- {
- 	struct mii_bus *mii_bus;
-@@ -2281,6 +2346,9 @@ static int b44_register_phy_one(struct b
- 	if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
- 	    (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
- 
-+		if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
-+			b44_register_adm_switch(bp);
-+
- 		dev_info(sdev->dev,
- 			 "could not find PHY at %i, use fixed one\n",
- 			 bp->phy_addr);
-@@ -2475,6 +2543,7 @@ static void b44_remove_one(struct ssb_de
- 	unregister_netdev(dev);
- 	if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- 		b44_unregister_phy_one(bp);
-+	b44_unregister_adm_switch(bp);
- 	ssb_device_disable(sdev, 0);
- 	ssb_bus_may_powerdown(sdev->bus);
- 	netif_napi_del(&bp->napi);
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -408,6 +408,9 @@ struct b44 {
- 	struct mii_bus		*mii_bus;
- 	int			old_link;
- 	struct mii_if_info	mii_if;
-+
-+	/* platform device for associated switch */
-+	struct platform_device *adm_switch;
- };
- 
- #endif /* _B44_H */
diff --git a/target/linux/brcm47xx/patches-4.19/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-4.19/210-b44_phy_fix.patch
deleted file mode 100644
index 51e4b8c5ae..0000000000
--- a/target/linux/brcm47xx/patches-4.19/210-b44_phy_fix.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
- error:
- 	pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+	char buf[20];
-+	struct ssb_device *sdev = bp->sdev;
-+
-+	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+	if (sdev->bus->sprom.board_num == 100) {
-+		bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+	} else {
-+		/* WL-HDD */
-+		if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
-+		    !strncmp(buf, "WL300-", strlen("WL300-"))) {
-+			if (sdev->bus->sprom.et0phyaddr == 0 &&
-+			    sdev->bus->sprom.et1phyaddr == 1)
-+				bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+		}
-+	}
-+	return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
- 
- static int b44_setup_phy(struct b44 *bp)
-@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
- 	int err;
- 
- 	b44_wap54g10_workaround(bp);
-+	b44_bcm47xx_workarounds(bp);
- 
- 	if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- 		return 0;
-@@ -2176,6 +2201,8 @@ static int b44_get_invariants(struct b44
- 	 * valid PHY address. */
- 	bp->phy_addr &= 0x1F;
- 
-+	b44_bcm47xx_workarounds(bp);
-+
- 	memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
- 
- 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/brcm47xx/patches-4.19/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-4.19/280-activate_ssb_support_in_usb.patch
deleted file mode 100644
index a1c988bb59..0000000000
--- a/target/linux/brcm47xx/patches-4.19/280-activate_ssb_support_in_usb.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -32,6 +32,7 @@ config BCMA_HOST_PCI
- config BCMA_HOST_SOC
- 	bool "Support for BCMA in a SoC"
- 	depends on HAS_IOMEM
-+	select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
- 	help
- 	  Host interface for a Broadcom AIX bus directly mapped into
- 	  the memory. This only works with the Broadcom SoCs from the
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -135,6 +135,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- 	bool
- 	depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
-+	select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- 	default y
- 
- config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-4.19/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-4.19/300-fork_cacheflush.patch
deleted file mode 100644
index b5efaaf03c..0000000000
--- a/target/linux/brcm47xx/patches-4.19/300-fork_cacheflush.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Wolfram Joost <dbox2@frokaschwei.de>
-Subject: [PATCH] fork_cacheflush
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -47,7 +47,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- 	unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-4.19/310-no_highpage.patch b/target/linux/brcm47xx/patches-4.19/310-no_highpage.patch
deleted file mode 100644
index 09bfc64552..0000000000
--- a/target/linux/brcm47xx/patches-4.19/310-no_highpage.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] no highpage
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
- #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
- 
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- 
- extern void build_clear_page(void);
- extern void build_copy_page(void);
-@@ -110,11 +111,16 @@ static inline void clear_user_page(void
- 		flush_data_cache_page((unsigned long)addr);
- }
- 
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+	struct page *to)
-+{
-+	extern void (*flush_data_cache_page)(unsigned long addr);
- 
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+	copy_page(vto, vfrom);
-+	if (!cpu_has_ic_fills_f_dc ||
-+	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+		flush_data_cache_page((unsigned long)vto);
-+}
- 
- /*
-  * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -162,30 +162,6 @@ void kunmap_coherent(void)
- 	preempt_enable();
- }
- 
--void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma)
--{
--	void *vfrom, *vto;
--
--	vto = kmap_atomic(to);
--	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
--	    page_mapcount(from) && !Page_dcache_dirty(from)) {
--		vfrom = kmap_coherent(from, vaddr);
--		copy_page(vto, vfrom);
--		kunmap_coherent();
--	} else {
--		vfrom = kmap_atomic(from);
--		copy_page(vto, vfrom);
--		kunmap_atomic(vfrom);
--	}
--	if ((!cpu_has_ic_fills_f_dc) ||
--	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
--		flush_data_cache_page((unsigned long)vto);
--	kunmap_atomic(vto);
--	/* Make sure this page is cleared on other CPU's too before using it */
--	smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
diff --git a/target/linux/brcm47xx/patches-4.19/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch b/target/linux/brcm47xx/patches-4.19/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch
deleted file mode 100644
index 74060e2181..0000000000
--- a/target/linux/brcm47xx/patches-4.19/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch
+++ /dev/null
@@ -1,185 +0,0 @@
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
- 	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
-+	{{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
-@@ -160,9 +161,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
- 	{{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
- 	{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
- 	{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
-+	{{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -27,6 +27,12 @@
- /* Asus */
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn10u[] __initconst = {
-+	BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(21, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_asus_rtn12[] __initconst = {
- 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
- 	BCM47XX_GPIO_KEY(1, KEY_RESTART),
-@@ -277,6 +283,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
-+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
- 	BCM47XX_GPIO_KEY(5, KEY_WIMAX),
- 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-@@ -385,6 +403,17 @@ bcm47xx_buttons_motorola_wr850gv2v3[] __
- /* Netgear */
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(12, KEY_RESTART),
-+	BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
- 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
- 	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -471,6 +500,9 @@ int __init bcm47xx_buttons_register(void
- 	int err;
- 
- 	switch (board) {
-+	case BCM47XX_BOARD_ASUS_RTN10U:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
-+		break;
- 	case BCM47XX_BOARD_ASUS_RTN12:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
- 		break;
-@@ -601,6 +633,12 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT310NV2:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
-+		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
- 		break;
-@@ -664,6 +702,12 @@ int __init bcm47xx_buttons_register(void
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
- 		break;
- 
-+	case BCM47XX_BOARD_NETGEAR_R6300_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
-+		break;
-+	case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
- 		break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -72,6 +72,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_LINKSYS_WRT300NV11,
- 	BCM47XX_BOARD_LINKSYS_WRT310NV1,
- 	BCM47XX_BOARD_LINKSYS_WRT310NV2,
-+	BCM47XX_BOARD_LINKSYS_WRT320N_V1,
- 	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
- 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
-@@ -98,9 +99,12 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_MOTOROLA_WR850GP,
- 	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
- 
-+	BCM47XX_BOARD_NETGEAR_R6300_V1,
- 	BCM47XX_BOARD_NETGEAR_WGR614V8,
- 	BCM47XX_BOARD_NETGEAR_WGR614V9,
- 	BCM47XX_BOARD_NETGEAR_WGR614_V10,
-+	BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
-+	BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
- 	BCM47XX_BOARD_NETGEAR_WNDR3300,
- 	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
- 	BCM47XX_BOARD_NETGEAR_WNDR3400V2,
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -30,6 +30,14 @@
- /* Asus */
- 
- static const struct gpio_led
-+bcm47xx_leds_asus_rtn10u[] __initconst = {
-+	BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_asus_rtn12[] __initconst = {
- 	BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- 	BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -314,6 +322,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
- };
- 
- static const struct gpio_led
-+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
-+	BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
- 	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- 	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
- 	enum bcm47xx_board board = bcm47xx_board_get();
- 
- 	switch (board) {
-+	case BCM47XX_BOARD_ASUS_RTN10U:
-+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
-+		break;
- 	case BCM47XX_BOARD_ASUS_RTN12:
- 		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
- 		break;
-@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
- 		break;
diff --git a/target/linux/brcm47xx/patches-4.19/400-mtd-bcm47xxpart-get-nvram.patch b/target/linux/brcm47xx/patches-4.19/400-mtd-bcm47xxpart-get-nvram.patch
deleted file mode 100644
index df9d434c9f..0000000000
--- a/target/linux/brcm47xx/patches-4.19/400-mtd-bcm47xxpart-get-nvram.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -102,6 +102,7 @@ static int bcm47xxpart_parse(struct mtd_
- 	int trx_num = 0; /* Number of found TRX partitions */
- 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
- 	int err;
-+	bool found_nvram = false;
- 
- 	/*
- 	 * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -283,12 +284,23 @@ static int bcm47xxpart_parse(struct mtd_
- 		if (buf[0] == NVRAM_HEADER) {
- 			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- 					     master->size - blocksize, 0);
-+			found_nvram = true;
- 			break;
- 		}
- 	}
- 
- 	kfree(buf);
- 
-+	if (!found_nvram) {
-+		pr_err("can not find a nvram partition reserve last block\n");
-+		bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
-+				     master->size - blocksize * 2, MTD_WRITEABLE);
-+		for (i = 0; i < curr_part; i++) {
-+			if (parts[i].size + parts[i].offset == master->size)
-+				parts[i].offset -= blocksize * 2;
-+		}
-+	}
-+
- 	/*
- 	 * Assume that partitions end at the beginning of the one they are
- 	 * followed by.
diff --git a/target/linux/brcm47xx/patches-4.19/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-4.19/610-pci_ide_fix.patch
deleted file mode 100644
index a353eec08c..0000000000
--- a/target/linux/brcm47xx/patches-4.19/610-pci_ide_fix.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: b.sander
-Subject: [PATCH] pci: IDE fix
-
-These are standard probing messages when using pdc202xx_old:
-pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
-PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
-PCI: Fixing up device 0000:00:01.0
-0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
-0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
-pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
-
-With the default MAX_HWIFS value after above we get:
-    ide2: BM-DMA at 0x0400-0x0407
-    ide3: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide2...
-hde: CF500, CFA DISK drive
-
-As you can see it's ide2 + ide3 and hde.
-
-With this patch applied we get:
-    ide0: BM-DMA at 0x0400-0x0407
-    ide1: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide0...
-hda: CF500, CFA DISK drive
-
-This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
----
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -235,7 +235,11 @@ static inline void ide_std_init_ports(st
- 	hw->io_ports.ctl_addr = ctl_addr;
- }
- 
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS	2
-+#else
- #define MAX_HWIFS	10
-+#endif
- 
- /*
-  * Now for the data we need to maintain per-drive:  ide_drive_t
diff --git a/target/linux/brcm47xx/patches-4.19/791-tg3-no-pci-sleep.patch b/target/linux/brcm47xx/patches-4.19/791-tg3-no-pci-sleep.patch
deleted file mode 100644
index 31c87b38c5..0000000000
--- a/target/linux/brcm47xx/patches-4.19/791-tg3-no-pci-sleep.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-When the Ethernet controller is powered down and someone wants to 
-access the mdio bus like the witch driver (b53) the system crashed if 
-PCI_D3hot was set before. This patch deactivates this power sawing mode 
-when a switch driver is in use.
-
---- a/drivers/net/ethernet/broadcom/tg3.c
-+++ b/drivers/net/ethernet/broadcom/tg3.c
-@@ -4279,7 +4279,8 @@ static int tg3_power_down_prepare(struct
- static void tg3_power_down(struct tg3 *tp)
- {
- 	pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
--	pci_set_power_state(tp->pdev, PCI_D3hot);
-+	if (!tg3_flag(tp, ROBOSWITCH))
-+		pci_set_power_state(tp->pdev, PCI_D3hot);
- }
- 
- static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
diff --git a/target/linux/brcm47xx/patches-4.19/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch b/target/linux/brcm47xx/patches-4.19/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
deleted file mode 100644
index 318dc55810..0000000000
--- a/target/linux/brcm47xx/patches-4.19/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 20 Nov 2014 21:32:42 +0100
-Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/bcma/driver_chipcommon_sflash.c
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -9,6 +9,7 @@
- 
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
-+#include <bcm47xx_board.h>
- 
- static struct resource bcma_sflash_resource = {
- 	.name	= "bcma_sflash",
-@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
- 	{ NULL },
- };
- 
-+/* Some devices use smaller blocks (and have more of them) */
-+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
-+	{ "M25P16", 0x14, 0x1000, 512, },
-+	{ "M25P32", 0x15, 0x1000, 1024, },
-+	{ NULL },
-+};
-+
- static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
- 	{ "SST25WF512", 1, 0x1000, 16, },
- 	{ "SST25VF512", 0x48, 0x1000, 16, },
-@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
- 	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
- }
- 
-+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+	const struct bcma_sflash_tbl_e *e;
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_NETGEAR_WGR614_V10:
-+	case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+		for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
-+			if (e->id == id)
-+				return e;
-+		}
-+		return NULL;
-+	default:
-+		return NULL;
-+	}
-+}
-+
- /* Initialize serial flash access */
- int bcma_sflash_init(struct bcma_drv_cc *cc)
- {
-@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
- 		case 0x13:
- 			return -ENOTSUPP;
- 		default:
-+			e = bcma_sflash_shrink_flash(id);
-+			if (e)
-+				break;
-+
- 			for (e = bcma_sflash_st_tbl; e->name; e++) {
- 				if (e->id == id)
- 					break;
diff --git a/target/linux/brcm47xx/patches-4.19/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-4.19/820-wgt634u-nvram-fix.patch
deleted file mode 100644
index aaab39ae41..0000000000
--- a/target/linux/brcm47xx/patches-4.19/820-wgt634u-nvram-fix.patch
+++ /dev/null
@@ -1,304 +0,0 @@
-The Netgear wgt634u uses a different format for storing the 
-configuration. This patch is needed to read out the correct 
-configuration. The cfe_env.c file uses a different method way to read 
-out the configuration than the in kernel cfe config reader.
-
---- a/drivers/firmware/broadcom/Makefile
-+++ b/drivers/firmware/broadcom/Makefile
-@@ -1,2 +1,2 @@
--obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o
-+obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o cfe_env.o
- obj-$(CONFIG_BCM47XX_SPROM)		+= bcm47xx_sprom.o
---- /dev/null
-+++ b/drivers/firmware/broadcom/cfe_env.c
-@@ -0,0 +1,228 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
-+ * 
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <linux/uaccess.h>
-+
-+#define NVRAM_SIZE       (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types.  These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ * 
-+ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
-+ * indicates the size of the length field.  
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-+#define ENV_LENGTH_8BITS	0x01
-+
-+#define ENV_TYPE_USER		0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END	0x00	
-+#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags 
-+ */
-+
-+#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-+#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-+#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-+#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-+
-+
-+/*  *********************************************************************
-+    *  _nvram_read(buffer,offset,length)
-+    *  
-+    *  Read data from the NVRAM device
-+    *  
-+    *  Input parameters: 
-+    *  	   buffer - destination buffer
-+    *  	   offset - offset of data to read
-+    *  	   length - number of bytes to read
-+    *  	   
-+    *  Return value:
-+    *  	   number of bytes read, or <0 if error occured
-+    ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+    int i;
-+    if (offset > NVRAM_SIZE)
-+	return -1; 
-+
-+    for ( i = 0; i < length; i++) {
-+	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+    }
-+    return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+	while (*dest && (cnt > 0)) {
-+	if (*dest == c) return (char *) dest;
-+	dest++;
-+	cnt--;
-+	}
-+	return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+
-+char *cfe_env_get(unsigned char *nv_buf, const char *name)
-+{
-+    int size;
-+    unsigned char *buffer;
-+    unsigned char *ptr;
-+    unsigned char *envval;
-+    unsigned int reclen;
-+    unsigned int rectype;
-+    int offset;
-+    int flg;
-+    
-+	if (!strcmp(name, "nvram_type"))
-+		return "cfe";
-+	
-+    size = NVRAM_SIZE;
-+    buffer = &_nvdata[0];
-+
-+    ptr = buffer;
-+    offset = 0;
-+
-+    /* Read the record type and length */
-+    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+	goto error;
-+    }
-+    
-+    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-+
-+	/* Adjust pointer for TLV type */
-+	rectype = *(ptr);
-+	offset++;
-+	size--;
-+
-+	/* 
-+	 * Read the length.  It can be either 1 or 2 bytes
-+	 * depending on the code 
-+	 */
-+	if (rectype & ENV_LENGTH_8BITS) {
-+	    /* Read the record type and length - 8 bits */
-+	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+		goto error;
-+	    }
-+	    reclen = *(ptr);
-+	    size--;
-+	    offset++;
-+	}
-+	else {
-+	    /* Read the record type and length - 16 bits, MSB first */
-+	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+		goto error;
-+	    }
-+	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+	    size -= 2;
-+	    offset += 2;
-+	}
-+
-+	if (reclen > size)
-+	    break;	/* should not happen, bad NVRAM */
-+
-+	switch (rectype) {
-+	    case ENV_TLV_TYPE_ENV:
-+		/* Read the TLV data */
-+		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+		    goto error;
-+		flg = *ptr++;
-+		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+		if (envval) {
-+		    *envval++ = '\0';
-+		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0			
-+		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+		    if(!strcmp(ptr, name)){
-+			return _valuestr;
-+		    }
-+		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+			return _valuestr;
-+		}
-+		break;
-+		
-+	    default: 
-+		/* Unknown TLV type, skip it. */
-+		break;
-+	    }
-+
-+	/*
-+	 * Advance to next TLV 
-+	 */
-+		
-+	size -= (int)reclen;
-+	offset += reclen;
-+
-+	/* Read the next record type */
-+	ptr = buffer;
-+	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+	    goto error;
-+	}
-+
-+error:
-+    return NULL;
-+
-+}
-+
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -37,6 +37,8 @@ struct nvram_header {
- static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
- 
- static u32 find_nvram_size(void __iomem *end)
- {
-@@ -56,7 +58,9 @@ static u32 find_nvram_size(void __iomem
- static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
- {
- 	struct nvram_header __iomem *header;
-+	int i;
- 	u32 off;
-+	u32 *src, *dst;
- 	u32 size;
- 
- 	if (nvram_len) {
-@@ -64,6 +68,26 @@ static int nvram_find_and_copy(void __io
- 		return -EEXIST;
- 	}
- 
-+	cfe_env = 0;
-+
-+	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+	if (lim >= 8 * 1024 * 1024) {
-+		src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000);
-+		dst = (u32 *)nvram_buf;
-+
-+		if ((*src & 0xff00ff) == 0x000001) {
-+			printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+			for (i = 0; i < 0x1ff0; i++) {
-+				if (*src == 0xFFFFFFFF)
-+					break;
-+				*dst++ = *src++;
-+			}
-+			cfe_env = 1;
-+			return 0;
-+		}
-+	}
-+
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
- 	off = FLASH_MIN;
- 	while (off <= lim) {
-@@ -174,6 +198,13 @@ int bcm47xx_nvram_getenv(const char *nam
- 	if (!name)
- 		return -EINVAL;
- 
-+	if (cfe_env) {
-+		value = cfe_env_get(nvram_buf, name);
-+		if (!value)
-+			return -ENOENT;
-+		return snprintf(val, val_len, "%s", value);
-+	}
-+
- 	if (!nvram_len) {
- 		err = nvram_init();
- 		if (err)
diff --git a/target/linux/brcm47xx/patches-4.19/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-4.19/830-huawei_e970_support.patch
deleted file mode 100644
index 4d43b9960b..0000000000
--- a/target/linux/brcm47xx/patches-4.19/830-huawei_e970_support.patch
+++ /dev/null
@@ -1,101 +0,0 @@
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -37,6 +37,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/old_gpio_wdt.h>
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
- #include <asm/prom.h>
-@@ -254,6 +255,33 @@ static struct fixed_phy_status bcm47xx_f
- 	.duplex	= DUPLEX_FULL,
- };
- 
-+static struct gpio_wdt_platform_data gpio_wdt_data;
-+
-+static struct platform_device gpio_wdt_device = {
-+	.name			= "gpio-wdt",
-+	.id			= 0,
-+	.dev			= {
-+		.platform_data	= &gpio_wdt_data,
-+	},
-+};
-+
-+static int __init bcm47xx_register_gpio_watchdog(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_HUAWEI_E970:
-+		pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
-+		gpio_wdt_data.gpio = 7;
-+		gpio_wdt_data.interval = HZ;
-+		gpio_wdt_data.first_interval = HZ / 5;
-+		return platform_device_register(&gpio_wdt_device);
-+	default:
-+		/* Nothing to do */
-+		return 0;
-+	}
-+}
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- 	switch (bcm47xx_bus_type) {
-@@ -275,6 +303,7 @@ static int __init bcm47xx_register_bus_c
- 	bcm47xx_workarounds();
- 
- 	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);
-+	bcm47xx_register_gpio_watchdog();
- 	return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
---- a/arch/mips/configs/bcm47xx_defconfig
-+++ b/arch/mips/configs/bcm47xx_defconfig
-@@ -66,6 +66,7 @@ CONFIG_HW_RANDOM=y
- CONFIG_GPIO_SYSFS=y
- CONFIG_WATCHDOG=y
- CONFIG_BCM47XX_WDT=y
-+CONFIG_GPIO_WDT=y
- CONFIG_SSB_DRIVER_GIGE=y
- CONFIG_BCMA_DRIVER_GMAC_CMN=y
- CONFIG_USB=y
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
- }
- EXPORT_SYMBOL(ssb_watchdog_timer_set);
- 
-+#ifdef CONFIG_BCM47XX
-+#include <bcm47xx_board.h>
-+
-+static bool ssb_watchdog_supported(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	/* The Huawei E970 has a hardware watchdog using a GPIO */
-+	switch (board) {
-+	case BCM47XX_BOARD_HUAWEI_E970:
-+		return false;
-+	default:
-+		return true;
-+	}
-+}
-+#else
-+static bool ssb_watchdog_supported(void)
-+{
-+	return true;
-+}
-+#endif
-+
- int ssb_watchdog_register(struct ssb_bus *bus)
- {
- 	struct bcm47xx_wdt wdt = {};
- 	struct platform_device *pdev;
- 
-+	if (!ssb_watchdog_supported())
-+		return 0;
-+
- 	if (ssb_chipco_available(&bus->chipco)) {
- 		wdt.driver_data = &bus->chipco;
- 		wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
diff --git a/target/linux/brcm47xx/patches-4.19/831-old_gpio_wdt.patch b/target/linux/brcm47xx/patches-4.19/831-old_gpio_wdt.patch
deleted file mode 100644
index ddac7917ea..0000000000
--- a/target/linux/brcm47xx/patches-4.19/831-old_gpio_wdt.patch
+++ /dev/null
@@ -1,360 +0,0 @@
-This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
-
-Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1497,6 +1497,15 @@ config WDT_MTX1
- 	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
- 	  will reboot the machine after a 100 seconds timer expired.
- 
-+config GPIO_WDT
-+	tristate "GPIO Hardware Watchdog"
-+ 	help
-+	  Hardware driver for GPIO-controlled watchdogs. GPIO pin and
-+	  toggle interval settings are platform-specific. The driver
-+	  will stop toggling the GPIO (i.e. machine reboots) after a
-+	  100 second timer expired and no process has written to
-+	  /dev/watchdog during that time.
-+
- config PNX833X_WDT
- 	tristate "PNX833x Hardware Watchdog"
- 	depends on SOC_PNX8335
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -154,6 +154,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/old_gpio_wdt.c
-@@ -0,0 +1,301 @@
-+/*
-+ *      Driver for GPIO-controlled Hardware Watchdogs.
-+ *
-+ *      Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ *      Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
-+ *
-+ *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
-+ *                              All Rights Reserved.
-+ *                              http://www.4g-systems.biz
-+ *
-+ *      (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Neither Michael Stickel nor 4G Systems admit liability nor provide
-+ *      warranty for any of this software. This material is provided
-+ *      "AS-IS" and at no charge.
-+ *
-+ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
-+ *
-+ *      Release 0.01.
-+ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
-+ *
-+ *      Release 0.02.
-+ *      Author: Florian Fainelli florian@openwrt.org
-+ *              use the Linux watchdog/timer APIs
-+ *
-+ *      Release 0.03.
-+ *      Author: Mathias Adam <m.adam--linux@adamis.de>
-+ *              make it a generic gpio watchdog driver
-+ *
-+ *      The Watchdog is configured to reset the MTX-1
-+ *      if it is not triggered for 100 seconds.
-+ *      It should not be triggered more often than 1.6 seconds.
-+ *
-+ *      A timer triggers the watchdog every 5 seconds, until
-+ *      it is opened for the first time. After the first open
-+ *      it MUST be triggered every 2..95 seconds.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/timer.h>
-+#include <linux/completion.h>
-+#include <linux/jiffies.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+#include <linux/gpio.h>
-+#include <linux/old_gpio_wdt.h>
-+
-+static int ticks = 100 * HZ;
-+
-+static struct {
-+	struct completion stop;
-+	spinlock_t lock;
-+	int running;
-+	struct timer_list timer;
-+	int queue;
-+	int default_ticks;
-+	unsigned long inuse;
-+	unsigned gpio;
-+	unsigned int gstate;
-+	int interval;
-+	int first_interval;
-+} gpio_wdt_device;
-+
-+static void gpio_wdt_trigger(unsigned long unused)
-+{
-+	spin_lock(&gpio_wdt_device.lock);
-+	if (gpio_wdt_device.running && ticks > 0)
-+		ticks -= gpio_wdt_device.interval;
-+
-+	/* toggle wdt gpio */
-+	gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
-+	gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
-+
-+	if (gpio_wdt_device.queue && ticks > 0)
-+		mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
-+	else
-+		complete(&gpio_wdt_device.stop);
-+	spin_unlock(&gpio_wdt_device.lock);
-+}
-+
-+static void gpio_wdt_reset(void)
-+{
-+	ticks = gpio_wdt_device.default_ticks;
-+}
-+
-+
-+static void gpio_wdt_start(void)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+	if (!gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 1;
-+		gpio_wdt_device.gstate = 1;
-+		gpio_set_value(gpio_wdt_device.gpio, 1);
-+		mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
-+	}
-+	gpio_wdt_device.running++;
-+	spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+}
-+
-+static int gpio_wdt_stop(void)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+	if (gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 0;
-+		gpio_wdt_device.gstate = 0;
-+		gpio_set_value(gpio_wdt_device.gpio, 0);
-+	}
-+	ticks = gpio_wdt_device.default_ticks;
-+	spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+	return 0;
-+}
-+
-+/* Filesystem functions */
-+
-+static int gpio_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(0, &gpio_wdt_device.inuse))
-+		return -EBUSY;
-+	return nonseekable_open(inode, file);
-+}
-+
-+
-+static int gpio_wdt_release(struct inode *inode, struct file *file)
-+{
-+	clear_bit(0, &gpio_wdt_device.inuse);
-+	return 0;
-+}
-+
-+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
-+							unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = (int __user *)argp;
-+	unsigned int value;
-+	static const struct watchdog_info ident = {
-+		.options = WDIOF_CARDRESET,
-+		.identity = "GPIO WDT",
-+	};
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		if (copy_to_user(argp, &ident, sizeof(ident)))
-+			return -EFAULT;
-+		break;
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		put_user(0, p);
-+		break;
-+	case WDIOC_SETOPTIONS:
-+		if (get_user(value, p))
-+			return -EFAULT;
-+		if (value & WDIOS_ENABLECARD)
-+			gpio_wdt_start();
-+		else if (value & WDIOS_DISABLECARD)
-+			gpio_wdt_stop();
-+		else
-+			return -EINVAL;
-+		return 0;
-+	case WDIOC_KEEPALIVE:
-+		gpio_wdt_reset();
-+		break;
-+	default:
-+		return -ENOTTY;
-+	}
-+	return 0;
-+}
-+
-+
-+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
-+						size_t count, loff_t *ppos)
-+{
-+	if (!count)
-+		return -EIO;
-+	gpio_wdt_reset();
-+	return count;
-+}
-+
-+static const struct file_operations gpio_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.unlocked_ioctl	= gpio_wdt_ioctl,
-+	.open		= gpio_wdt_open,
-+	.write		= gpio_wdt_write,
-+	.release	= gpio_wdt_release,
-+};
-+
-+
-+static struct miscdevice gpio_wdt_misc = {
-+	.minor	= WATCHDOG_MINOR,
-+	.name	= "watchdog",
-+	.fops	= &gpio_wdt_fops,
-+};
-+
-+
-+static int gpio_wdt_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+	struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
-+
-+	gpio_wdt_device.gpio = gpio_wdt_data->gpio;
-+	gpio_wdt_device.interval = gpio_wdt_data->interval;
-+	gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
-+	if (gpio_wdt_device.first_interval <= 0) {
-+		gpio_wdt_device.first_interval = gpio_wdt_device.interval;
-+	}
-+
-+	ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to request gpio");
-+		return ret;
-+	}
-+
-+	spin_lock_init(&gpio_wdt_device.lock);
-+	init_completion(&gpio_wdt_device.stop);
-+	gpio_wdt_device.queue = 0;
-+	clear_bit(0, &gpio_wdt_device.inuse);
-+	setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
-+	gpio_wdt_device.default_ticks = ticks;
-+
-+	gpio_wdt_start();
-+	dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
-+		gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
-+	return 0;
-+}
-+
-+static int gpio_wdt_remove(struct platform_device *pdev)
-+{
-+	/* FIXME: do we need to lock this test ? */
-+	if (gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 0;
-+		wait_for_completion(&gpio_wdt_device.stop);
-+	}
-+
-+	gpio_free(gpio_wdt_device.gpio);
-+	misc_deregister(&gpio_wdt_misc);
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_wdt_driver = {
-+	.probe = gpio_wdt_probe,
-+	.remove = gpio_wdt_remove,
-+	.driver.name = "gpio-wdt",
-+	.driver.owner = THIS_MODULE,
-+};
-+
-+static int __init gpio_wdt_init(void)
-+{
-+	return platform_driver_register(&gpio_wdt_driver);
-+}
-+arch_initcall(gpio_wdt_init);
-+
-+/*
-+ * We do wdt initialization in two steps: arch_initcall probes the wdt
-+ * very early to start pinging the watchdog (misc devices are not yet
-+ * available), and later module_init() just registers the misc device.
-+ */
-+static int gpio_wdt_init_late(void)
-+{
-+	int ret;
-+
-+	ret = misc_register(&gpio_wdt_misc);
-+	if (ret < 0) {
-+		pr_err("GPIO_WDT: failed to register misc device\n");
-+		return ret;
-+	}
-+	return 0;
-+}
-+#ifndef MODULE
-+module_init(gpio_wdt_init_late);
-+#endif
-+
-+static void __exit gpio_wdt_exit(void)
-+{
-+	platform_driver_unregister(&gpio_wdt_driver);
-+}
-+module_exit(gpio_wdt_exit);
-+
-+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
-+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:gpio-wdt");
---- /dev/null
-+++ b/include/linux/old_gpio_wdt.h
-@@ -0,0 +1,21 @@
-+/*
-+ *  Definitions for the GPIO watchdog driver
-+ *
-+ *  Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef _GPIO_WDT_H_
-+#define _GPIO_WDT_H_
-+
-+struct gpio_wdt_platform_data {
-+	int	gpio;		/* GPIO line number */
-+	int	interval;	/* watchdog reset interval in system ticks */
-+	int	first_interval;	/* first wd reset interval in system ticks */
-+};
-+
-+#endif /* _GPIO_WDT_H_ */
diff --git a/target/linux/brcm47xx/patches-4.19/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch b/target/linux/brcm47xx/patches-4.19/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
deleted file mode 100644
index 6b7ee06e50..0000000000
--- a/target/linux/brcm47xx/patches-4.19/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 8 Apr 2015 06:58:11 +0200
-Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-If SoC has a CardBus we can set resources of device at slot 1 only. It's
-impossigle to set bridge resources as it simply overwrites device 1
-configuration and usually results in Data bus error-s.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/ssb/driver_pcicore.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
- 	WARN_ON(!pc->hostmode);
- 	if (unlikely(len != 1 && len != 2 && len != 4))
- 		goto out;
-+	/* CardBus SoCs allow configuring dev 1 resources only */
-+	if (extpci_core->cardbusmode && dev != 1 &&
-+	    off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
-+		goto out;
- 	addr = get_cfgspace_addr(pc, bus, dev, func, off);
- 	if (unlikely(!addr))
- 		goto out;
diff --git a/target/linux/brcm47xx/patches-4.19/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-4.19/940-bcm47xx-yenta.patch
deleted file mode 100644
index f5b7bda4e6..0000000000
--- a/target/linux/brcm47xx/patches-4.19/940-bcm47xx-yenta.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
- 	 * Probe for usable interrupts using the force
- 	 * register to generate bogus card status events.
- 	 */
-+#ifndef CONFIG_BCM47XX
-+	/* WRT54G3G does not like this */
- 	cb_writel(socket, CB_SOCKET_EVENT, -1);
- 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- 	reg = exca_readb(socket, I365_CSCINT);
-@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
- 	}
- 	cb_writel(socket, CB_SOCKET_MASK, 0);
- 	exca_writeb(socket, I365_CSCINT, reg);
-+#endif
- 
- 	mask = probe_irq_mask(val) & 0xffff;
- 
-@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
- 	else
- 		socket->socket.irq_mask = 0;
- 
-+	/* irq mask probing is broken for the WRT54G3G */
-+	if (socket->socket.irq_mask == 0)
-+		socket->socket.irq_mask = 0x6f8;
-+
- 	dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
- 		 socket->socket.irq_mask, socket->cb_irq);
- }
-@@ -1250,6 +1257,15 @@ static int yenta_probe(struct pci_dev *d
- 	dev_info(&dev->dev, "Socket status: %08x\n",
- 		 cb_readl(socket, CB_SOCKET_STATE));
- 
-+	/* Generate an interrupt on card insert/remove */
-+	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+	/* Set up Multifunction Routing Status Register */
-+	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+	/* Switch interrupts to parallelized */
-+	config_writeb(socket, 0x92, 0x64);
-+
- 	yenta_fixup_parent_bridge(dev->subordinate);
- 
- 	/* Register it with the pcmcia layer.. */
diff --git a/target/linux/brcm47xx/patches-4.19/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-4.19/976-ssb_increase_pci_delay.patch
deleted file mode 100644
index 99aa188374..0000000000
--- a/target/linux/brcm47xx/patches-4.19/976-ssb_increase_pci_delay.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -390,7 +390,7 @@ static void ssb_pcicore_init_hostmode(st
- 	set_io_port_base(ssb_pcicore_controller.io_map_base);
- 	/* Give some time to the PCI controller to configure itself with the new
- 	 * values. Not waiting at this point causes crashes of the machine. */
--	mdelay(10);
-+	mdelay(300);
- 	register_pci_controller(&ssb_pcicore_controller);
- }
- 
diff --git a/target/linux/brcm47xx/patches-4.19/999-wl_exports.patch b/target/linux/brcm47xx/patches-4.19/999-wl_exports.patch
deleted file mode 100644
index 2936421aff..0000000000
--- a/target/linux/brcm47xx/patches-4.19/999-wl_exports.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -34,7 +34,8 @@ struct nvram_header {
- 	u32 config_ncdl;	/* ncdl values for memc */
- };
- 
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- static int cfe_env;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
diff --git a/target/linux/cns3xxx/Makefile b/target/linux/cns3xxx/Makefile
index 785b06f596..abb1fccf32 100644
--- a/target/linux/cns3xxx/Makefile
+++ b/target/linux/cns3xxx/Makefile
@@ -15,7 +15,6 @@ CPU_SUBTYPE:=vfp
 MAINTAINER:=Felix Fietkau <nbd@nbd.name>, \
 	    Koen Vandeputte <koen.vandeputte@ncentric.com>
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 define Target/Description
 	Build images for Cavium Networks Econa CNS3xxx based boards,
diff --git a/target/linux/cns3xxx/patches-4.19/000-cns3xxx_arch_include.patch b/target/linux/cns3xxx/patches-4.19/000-cns3xxx_arch_include.patch
deleted file mode 100644
index 3ae759021a..0000000000
--- a/target/linux/cns3xxx/patches-4.19/000-cns3xxx_arch_include.patch
+++ /dev/null
@@ -1,9 +0,0 @@
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -1,4 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
-+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-+
- obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
- cns3xxx-y				+= core.o pm.o
- cns3xxx-$(CONFIG_ATAGS)			+= devices.o
diff --git a/target/linux/cns3xxx/patches-4.19/001-arm_openwrt_machtypes.patch b/target/linux/cns3xxx/patches-4.19/001-arm_openwrt_machtypes.patch
deleted file mode 100644
index f323deee47..0000000000
--- a/target/linux/cns3xxx/patches-4.19/001-arm_openwrt_machtypes.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -449,6 +449,7 @@ gplugd			MACH_GPLUGD		GPLUGD			2625
- qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
- mx23evk			MACH_MX23EVK		MX23EVK			2629
- ap4evb			MACH_AP4EVB		AP4EVB			2630
-+gw2388			MACH_GW2388		GW2388			2635
- mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
- guruplug		MACH_GURUPLUG		GURUPLUG		2659
- spear310		MACH_SPEAR310		SPEAR310		2660
diff --git a/target/linux/cns3xxx/patches-4.19/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/cns3xxx/patches-4.19/010-arm_introduce-dma-fiq-irq-broadcast.patch
deleted file mode 100644
index 45f8feead4..0000000000
--- a/target/linux/cns3xxx/patches-4.19/010-arm_introduce-dma-fiq-irq-broadcast.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/arm/include/asm/glue-cache.h
-+++ b/arch/arm/include/asm/glue-cache.h
-@@ -156,9 +156,15 @@ static inline void nop_dma_unmap_area(co
- #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
- #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
- #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
--#define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
- 
--#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+# define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
-+# define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
-+#else
-+# define __cpuc_flush_dcache_area	__glue(fiq,_flush_kern_dcache_area)
-+# define dmac_flush_range		__glue(fiq,_dma_flush_range)
-+#endif
-+
- #endif
- 
- #endif
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -916,6 +916,17 @@ config DMA_CACHE_RWFO
- 	  in hardware, other workarounds are needed (e.g. cache
- 	  maintenance broadcasting in software via FIQ).
- 
-+config DMA_CACHE_FIQ_BROADCAST
-+	bool "Enable fiq broadcast DMA cache maintenance"
-+	depends on CPU_V6K && SMP
-+	select FIQ
-+	help
-+	  The Snoop Control Unit on ARM11MPCore does not detect the
-+	  cache maintenance operations and the dma_{map,unmap}_area()
-+	  functions may leave stale cache entries on other CPUs. By
-+	  enabling this option, fiq broadcast in the ARMv6
-+	  DMA cache maintenance functions is performed.
-+
- config OUTER_CACHE
- 	bool
- 
---- a/arch/arm/mm/flush.c
-+++ b/arch/arm/mm/flush.c
-@@ -319,6 +319,7 @@ void __sync_icache_dcache(pte_t pteval)
- void flush_dcache_page(struct page *page)
- {
- 	struct address_space *mapping;
-+	bool skip_broadcast = true;
- 
- 	/*
- 	 * The zero page is never written to, so never has any dirty
-@@ -335,7 +336,10 @@ void flush_dcache_page(struct page *page
- 
- 	mapping = page_mapping_file(page);
- 
--	if (!cache_ops_need_broadcast() &&
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+        skip_broadcast = !cache_ops_need_broadcast();
-+#endif
-+        if (skip_broadcast &&
- 	    mapping && !page_mapcount(page))
- 		clear_bit(PG_dcache_clean, &page->flags);
- 	else {
---- a/arch/arm/mm/dma.h
-+++ b/arch/arm/mm/dma.h
-@@ -5,8 +5,13 @@
- #include <asm/glue-cache.h>
- 
- #ifndef MULTI_CACHE
--#define dmac_map_area			__glue(_CACHE,_dma_map_area)
--#define dmac_unmap_area 		__glue(_CACHE,_dma_unmap_area)
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+# define dmac_map_area			__glue(_CACHE,_dma_map_area)
-+# define dmac_unmap_area 		__glue(_CACHE,_dma_unmap_area)
-+#else
-+# define dmac_map_area			__glue(fiq,_dma_map_area)
-+# define dmac_unmap_area			__glue(fiq,_dma_unmap_area)
-+#endif
- 
- /*
-  * These are private to the dma-mapping API.  Do not use directly.
diff --git a/target/linux/cns3xxx/patches-4.19/020-watchdog_support.patch b/target/linux/cns3xxx/patches-4.19/020-watchdog_support.patch
deleted file mode 100644
index e626ff29b7..0000000000
--- a/target/linux/cns3xxx/patches-4.19/020-watchdog_support.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-Add a watchdog driver for ARM MPcore processors.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -375,6 +375,13 @@ config KS8695_WATCHDOG
- 	  Watchdog timer embedded into KS8695 processor. This will reboot your
- 	  system when the timeout is reached.
- 
-+config MPCORE_WATCHDOG
-+	tristate "MPcore watchdog"
-+	depends on HAVE_ARM_TWD
-+	select WATCHDOG_CORE
-+	help
-+	  Watchdog timer embedded into the MPcore system
-+
- config HAVE_S3C2410_WATCHDOG
- 	bool
- 	help
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_977_WATCHDOG) += wdt977.o
- obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
- obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
- obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
-+obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
- obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
- obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/mpcore_wdt.c
-@@ -0,0 +1,118 @@
-+/*
-+ * Watchdog driver for ARM MPcore
-+ *
-+ * Copyright (C) 2017 Felix Fietkau <nbd@nbd.name>
-+ */
-+
-+#include <linux/export.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <asm/smp_twd.h>
-+
-+static void __iomem *wdt_base;
-+static int wdt_timeout = 60;
-+
-+static int mpcore_wdt_keepalive(struct watchdog_device *wdd)
-+{
-+	static int perturb;
-+	u32 count;
-+
-+	count = (twd_timer_get_rate() / 256) * wdt_timeout;
-+
-+	/* Reload register needs a different value on each refresh */
-+	count += perturb;
-+	perturb = !perturb;
-+
-+	iowrite32(count, wdt_base + TWD_WDOG_LOAD);
-+
-+	return 0;
-+}
-+
-+static int mpcore_wdt_start(struct watchdog_device *wdd)
-+{
-+	mpcore_wdt_keepalive(wdd);
-+
-+	/* prescale = 256, mode = 1, enable = 1 */
-+	iowrite32(0x0000FF09, wdt_base + TWD_WDOG_CONTROL);
-+
-+	return 0;
-+}
-+
-+static int mpcore_wdt_stop(struct watchdog_device *wdd)
-+{
-+	iowrite32(0x12345678, wdt_base + TWD_WDOG_DISABLE);
-+	iowrite32(0x87654321, wdt_base + TWD_WDOG_DISABLE);
-+	iowrite32(0x0, wdt_base + TWD_WDOG_CONTROL);
-+
-+	return 0;
-+}
-+
-+static int mpcore_wdt_set_timeout(struct watchdog_device *wdd,
-+				 unsigned int timeout)
-+{
-+	mpcore_wdt_stop(wdd);
-+	wdt_timeout = timeout;
-+	mpcore_wdt_start(wdd);
-+
-+	return 0;
-+}
-+
-+static const struct watchdog_info mpcore_wdt_info = {
-+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
-+	.identity = "MPcore Watchdog",
-+};
-+
-+static const struct watchdog_ops mpcore_wdt_ops = {
-+	.owner = THIS_MODULE,
-+	.start = mpcore_wdt_start,
-+	.stop  = mpcore_wdt_stop,
-+	.ping  = mpcore_wdt_keepalive,
-+	.set_timeout = mpcore_wdt_set_timeout,
-+};
-+
-+static struct watchdog_device mpcore_wdt = {
-+	.info = &mpcore_wdt_info,
-+	.ops = &mpcore_wdt_ops,
-+	.min_timeout = 1,
-+	.max_timeout = 65535,
-+};
-+
-+static int mpcore_wdt_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	unsigned long rate = twd_timer_get_rate();
-+
-+	pr_info("MPCore WD init. clockrate: %lu prescaler: %u countrate: %lu timeout: %us\n", rate, 256, rate / 256, wdt_timeout);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res)
-+		return -ENODEV;
-+
-+	wdt_base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(wdt_base))
-+		return PTR_ERR(wdt_base);
-+
-+	watchdog_register_device(&mpcore_wdt);
-+	return 0;
-+}
-+
-+static int mpcore_wdt_remove(struct platform_device *dev)
-+{
-+	watchdog_unregister_device(&mpcore_wdt);
-+	return 0;
-+}
-+
-+static struct platform_driver mpcore_wdt_driver = {
-+	.probe		= mpcore_wdt_probe,
-+	.remove		= mpcore_wdt_remove,
-+	.driver		= {
-+		.name	= "mpcore_wdt",
-+	},
-+};
-+
-+module_platform_driver(mpcore_wdt_driver);
-+MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
-+MODULE_LICENSE("GPL");
---- a/arch/arm/include/asm/smp_twd.h
-+++ b/arch/arm/include/asm/smp_twd.h
-@@ -34,5 +34,6 @@ struct twd_local_timer name __initdata =
- };
- 
- int twd_local_timer_register(struct twd_local_timer *);
-+unsigned long twd_timer_get_rate(void);
- 
- #endif
---- a/arch/arm/kernel/smp_twd.c
-+++ b/arch/arm/kernel/smp_twd.c
-@@ -15,6 +15,7 @@
- #include <linux/delay.h>
- #include <linux/device.h>
- #include <linux/err.h>
-+#include <linux/export.h>
- #include <linux/smp.h>
- #include <linux/jiffies.h>
- #include <linux/clockchips.h>
-@@ -380,6 +381,14 @@ int __init twd_local_timer_register(stru
- 	return twd_local_timer_common_register(NULL);
- }
- 
-+/* Needed by mpcore_wdt */
-+unsigned long twd_timer_get_rate(void)
-+{
-+	return twd_timer_rate;
-+}
-+EXPORT_SYMBOL_GPL(twd_timer_get_rate);
-+
-+
- #ifdef CONFIG_OF
- static int __init twd_local_timer_of_register(struct device_node *np)
- {
diff --git a/target/linux/cns3xxx/patches-4.19/025-smp_support.patch b/target/linux/cns3xxx/patches-4.19/025-smp_support.patch
deleted file mode 100644
index dc8e4b03c2..0000000000
--- a/target/linux/cns3xxx/patches-4.19/025-smp_support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -6,3 +6,5 @@ cns3xxx-y				+= core.o pm.o
- cns3xxx-$(CONFIG_ATAGS)			+= devices.o
- cns3xxx-$(CONFIG_PCI)			+= pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
-+cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o
-+cns3xxx-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -3,6 +3,9 @@ menuconfig ARCH_CNS3XXX
- 	bool "Cavium Networks CNS3XXX family"
- 	depends on ARCH_MULTI_V6
- 	select ARM_GIC
-+	select HAVE_ARM_SCU if SMP
-+	select HAVE_ARM_TWD
-+	select HAVE_SMP
- 	help
- 	  Support for Cavium Networks CNS3XXX platform.
- 
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -13,6 +13,7 @@
- 
- #include <linux/reboot.h>
- 
-+extern struct smp_operations cns3xxx_smp_ops;
- extern void cns3xxx_timer_init(void);
- 
- #ifdef CONFIG_CACHE_L2X0
diff --git a/target/linux/cns3xxx/patches-4.19/030-pcie_clock.patch b/target/linux/cns3xxx/patches-4.19/030-pcie_clock.patch
deleted file mode 100644
index 66c3a99ae1..0000000000
--- a/target/linux/cns3xxx/patches-4.19/030-pcie_clock.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -281,8 +281,6 @@ void __init cns3xxx_pcie_init_late(void)
- 			"imprecise external abort");
- 
- 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
--		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
--		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
- 		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
- 		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
- 		private_data = &cns3xxx_pcie[i];
diff --git a/target/linux/cns3xxx/patches-4.19/040-fiq_support.patch b/target/linux/cns3xxx/patches-4.19/040-fiq_support.patch
deleted file mode 100644
index bee8c1ef24..0000000000
--- a/target/linux/cns3xxx/patches-4.19/040-fiq_support.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -6,6 +6,7 @@ menuconfig ARCH_CNS3XXX
- 	select HAVE_ARM_SCU if SMP
- 	select HAVE_ARM_TWD
- 	select HAVE_SMP
-+	select FIQ
- 	help
- 	  Support for Cavium Networks CNS3XXX platform.
- 
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -6,5 +6,5 @@ cns3xxx-y				+= core.o pm.o
- cns3xxx-$(CONFIG_ATAGS)			+= devices.o
- cns3xxx-$(CONFIG_PCI)			+= pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
--cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o
-+cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o cns3xxx_fiq.o
- cns3xxx-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
---- a/arch/arm/mach-cns3xxx/cns3xxx.h
-+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
-@@ -261,6 +261,7 @@
- #define MISC_PCIE_INT_MASK(x)			MISC_MEM_MAP(0x978 + (x) * 0x100)
- #define MISC_PCIE_INT_STATUS(x)			MISC_MEM_MAP(0x97C + (x) * 0x100)
- 
-+#define MISC_FIQ_CPU(x)				MISC_MEM_MAP(0xA58 - (x) * 0x4)
- /*
-  * Power management and clock control
-  */
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -899,7 +899,7 @@ config VDSO
- 
- config DMA_CACHE_RWFO
- 	bool "Enable read/write for ownership DMA cache maintenance"
--	depends on CPU_V6K && SMP
-+	depends on CPU_V6K && SMP && !ARCH_CNS3XXX
- 	default y
- 	help
- 	  The Snoop Control Unit on ARM11MPCore does not detect the
diff --git a/target/linux/cns3xxx/patches-4.19/045-twd_base.patch b/target/linux/cns3xxx/patches-4.19/045-twd_base.patch
deleted file mode 100644
index e722b01bbc..0000000000
--- a/target/linux/cns3xxx/patches-4.19/045-twd_base.patch
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -17,6 +17,7 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
-+#include <asm/smp_twd.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/mach/time.h>
-@@ -26,6 +27,8 @@
- #include "core.h"
- #include "pm.h"
- 
-+#define IRQ_LOCALTIMER 29
-+
- static struct map_desc cns3xxx_io_desc[] __initdata = {
- 	{
- 		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
-@@ -198,6 +201,15 @@ static struct irqaction cns3xxx_timer_ir
- 	.handler	= cns3xxx_timer_interrupt,
- };
- 
-+static void __init cns3xxx_init_twd(void)
-+{
-+	static DEFINE_TWD_LOCAL_TIMER(cns3xx_twd_local_timer,
-+		CNS3XXX_TC11MP_TWD_BASE,
-+		IRQ_LOCALTIMER);
-+
-+	twd_local_timer_register(&cns3xx_twd_local_timer);
-+}
-+
- /*
-  * Set up the clock source and clock events devices
-  */
-@@ -251,6 +263,7 @@ static void __init __cns3xxx_timer_init(
- 	setup_irq(timer_irq, &cns3xxx_timer_irq);
- 
- 	cns3xxx_clockevents_init(timer_irq);
-+	cns3xxx_init_twd();
- }
- 
- void __init cns3xxx_timer_init(void)
diff --git a/target/linux/cns3xxx/patches-4.19/055-pcie_io.patch b/target/linux/cns3xxx/patches-4.19/055-pcie_io.patch
deleted file mode 100644
index 4680853e6e..0000000000
--- a/target/linux/cns3xxx/patches-4.19/055-pcie_io.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -81,6 +81,16 @@ static struct map_desc cns3xxx_io_desc[]
- 		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
- 		.length		= SZ_16M,
- 		.type		= MT_DEVICE,
-+	}, {
-+		.virtual	= CNS3XXX_PCIE0_IO_BASE_VIRT,
-+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE),
-+		.length		= SZ_16M,
-+		.type		= MT_DEVICE,
-+	}, {
-+		.virtual	= CNS3XXX_PCIE1_IO_BASE_VIRT,
-+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE),
-+		.length		= SZ_16M,
-+		.type		= MT_DEVICE,
- #endif
- 	},
- };
diff --git a/target/linux/cns3xxx/patches-4.19/060-pcie_abort.patch b/target/linux/cns3xxx/patches-4.19/060-pcie_abort.patch
deleted file mode 100644
index 87b1526c3a..0000000000
--- a/target/linux/cns3xxx/patches-4.19/060-pcie_abort.patch
+++ /dev/null
@@ -1,109 +0,0 @@
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -86,6 +86,79 @@ static void __iomem *cns3xxx_pci_map_bus
- 	return base + where + (devfn << 12);
- }
- 
-+static inline int check_master_abort(struct pci_bus *bus, unsigned int devfn, int where)
-+{
-+	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
-+
-+  /* check PCI-compatible status register after access */
-+	if (cnspci->linked) {
-+		void __iomem *host_base;
-+		u32 sreg, ereg;
-+
-+		host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
-+		sreg = __raw_readw(host_base + 0x6) & 0xF900;
-+		ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
-+
-+		if (sreg | ereg) {
-+			/* SREG:
-+			 *  BIT15 - Detected Parity Error
-+			 *  BIT14 - Signaled System Error
-+			 *  BIT13 - Received Master Abort
-+			 *  BIT12 - Received Target Abort
-+			 *  BIT11 - Signaled Target Abort
-+			 *  BIT08 - Master Data Parity Error
-+			 *
-+			 * EREG:
-+			 *  BIT20 - Unsupported Request
-+			 *  BIT19 - ECRC
-+			 *  BIT18 - Malformed TLP
-+			 *  BIT17 - Receiver Overflow
-+			 *  BIT16 - Unexpected Completion
-+			 *  BIT15 - Completer Abort
-+			 *  BIT14 - Completion Timeout
-+			 *  BIT13 - Flow Control Protocol Error
-+			 *  BIT12 - Poisoned TLP
-+			 *  BIT04 - Data Link Protocol Error
-+			 *
-+			 * TODO: see Documentation/pci-error-recovery.txt
-+			 *    implement error_detected handler
-+			 */
-+/*
-+			printk("pci error: %04d:%02x:%02x.%02x sreg=0x%04x ereg=0x%08x", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), sreg, ereg);
-+			if (sreg & BIT(15)) printk(" <PERR");
-+			if (sreg & BIT(14)) printk(" >SERR");
-+			if (sreg & BIT(13)) printk(" <MABRT");
-+			if (sreg & BIT(12)) printk(" <TABRT");
-+			if (sreg & BIT(11)) printk(" >TABRT");
-+			if (sreg & BIT( 8)) printk(" MPERR");
-+
-+			if (ereg & BIT(20)) printk(" Unsup");
-+			if (ereg & BIT(19)) printk(" ECRC");
-+			if (ereg & BIT(18)) printk(" MTLP");
-+			if (ereg & BIT(17)) printk(" OFLOW");
-+			if (ereg & BIT(16)) printk(" Unex");
-+			if (ereg & BIT(15)) printk(" ABRT");
-+			if (ereg & BIT(14)) printk(" COMPTO");
-+			if (ereg & BIT(13)) printk(" FLOW");
-+			if (ereg & BIT(12)) printk(" PTLP");
-+			if (ereg & BIT( 4)) printk(" DLINK");
-+			printk("\n");
-+*/
-+			pr_debug("%s failed port%d sreg=0x%04x\n", __func__,
-+				pci_domain_nr(bus), sreg);
-+
-+			/* make sure the status bits are reset */
-+			__raw_writew(sreg, host_base + 6);
-+			__raw_writel(ereg, host_base + 0x104);
-+			return 1;
-+		}
-+	}
-+	else
-+		return 1;
-+
-+  return 0;
-+}
-+
- static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- 				   int where, int size, u32 *val)
- {
-@@ -95,6 +168,11 @@ static int cns3xxx_pci_read_config(struc
- 
- 	ret = pci_generic_config_read(bus, devfn, where, size, val);
- 
-+	if (check_master_abort(bus, devfn, where)) {
-+		printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)= master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
-+		return PCIBIOS_DEVICE_NOT_FOUND;
-+	}
-+
- 	if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
- 	    (where & 0xffc) == PCI_CLASS_REVISION)
- 		/*
-@@ -257,8 +335,14 @@ static void __init cns3xxx_pcie_hw_init(
- static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
- 				      struct pt_regs *regs)
- {
-+#if 0
-+/* R14_ABORT = PC+4 for XSCALE but not ARM11MPCORE
-+ * ignore imprecise aborts and use PCI-compatible Status register to
-+ * determine errors instead
-+ */
- 	if (fsr & (1 << 10))
- 		regs->ARM_pc += 4;
-+#endif
- 	return 0;
- }
- 
diff --git a/target/linux/cns3xxx/patches-4.19/065-pcie_skip_inactive.patch b/target/linux/cns3xxx/patches-4.19/065-pcie_skip_inactive.patch
deleted file mode 100644
index b8b5f273a1..0000000000
--- a/target/linux/cns3xxx/patches-4.19/065-pcie_skip_inactive.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -366,6 +366,8 @@ void __init cns3xxx_pcie_init_late(void)
- 
- 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
- 		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
-+		if (!cns3xxx_pcie[i].linked)
-+			continue;
- 		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
- 		private_data = &cns3xxx_pcie[i];
- 		pci_common_init(&hw_pci);
diff --git a/target/linux/cns3xxx/patches-4.19/070-i2c_support.patch b/target/linux/cns3xxx/patches-4.19/070-i2c_support.patch
deleted file mode 100644
index 9bfb8444e6..0000000000
--- a/target/linux/cns3xxx/patches-4.19/070-i2c_support.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -459,6 +459,18 @@ config I2C_CBUS_GPIO
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called i2c-cbus-gpio.
- 
-+config I2C_CNS3XXX
-+	tristate "Cavium CNS3xxx I2C driver"
-+	depends on ARCH_CNS3XXX
-+	help
-+	  Support for Cavium CNS3xxx I2C controller driver.
-+
-+	  This driver can also be built as a module.  If so, the module
-+	  will be called i2c-cns3xxx.
-+
-+	  Please note that this driver might be needed to bring up other
-+	  devices such as Cavium CNS3xxx Ethernet.
-+
- config I2C_CPM
- 	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
- 	depends on CPM1 || CPM2
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -131,6 +131,7 @@ obj-$(CONFIG_I2C_VIPERBOARD)	+= i2c-vipe
- obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
- obj-$(CONFIG_I2C_BCM_KONA)	+= i2c-bcm-kona.o
- obj-$(CONFIG_I2C_BRCMSTB)	+= i2c-brcmstb.o
-+obj-$(CONFIG_I2C_CNS3XXX)	+= i2c-cns3xxx.o
- obj-$(CONFIG_I2C_CROS_EC_TUNNEL)	+= i2c-cros-ec-tunnel.o
- obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
- obj-$(CONFIG_I2C_MLXCPLD)	+= i2c-mlxcpld.o
diff --git a/target/linux/cns3xxx/patches-4.19/075-spi_support.patch b/target/linux/cns3xxx/patches-4.19/075-spi_support.patch
deleted file mode 100644
index afa6d862df..0000000000
--- a/target/linux/cns3xxx/patches-4.19/075-spi_support.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -181,6 +181,13 @@ config SPI_CLPS711X
- 	  This enables dedicated general purpose SPI/Microwire1-compatible
- 	  master mode interface (SSI1) for CLPS711X-based CPUs.
- 
-+config SPI_CNS3XXX
-+	tristate "CNS3XXX SPI controller"
-+	depends on ARCH_CNS3XXX && SPI_MASTER
-+	select SPI_BITBANG
-+	help
-+	  This enables using the CNS3XXX SPI controller in master mode.
-+
- config SPI_COLDFIRE_QSPI
- 	tristate "Freescale Coldfire QSPI controller"
- 	depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi-bitban
- obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
- obj-$(CONFIG_SPI_CADENCE)		+= spi-cadence.o
- obj-$(CONFIG_SPI_CLPS711X)		+= spi-clps711x.o
-+obj-$(CONFIG_SPI_CNS3XXX)		+= spi-cns3xxx.o
- obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= spi-coldfire-qspi.o
- obj-$(CONFIG_SPI_DAVINCI)		+= spi-davinci.o
- obj-$(CONFIG_SPI_DLN2)			+= spi-dln2.o
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -795,6 +795,10 @@ struct spi_transfer {
- 	u32		speed_hz;
- 
- 	struct list_head transfer_list;
-+
-+#ifdef CONFIG_ARCH_CNS3XXX
-+	unsigned	last_in_message_list;
-+#endif
- };
- 
- /**
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -1020,6 +1020,9 @@ static int spi_transfer_one_message(stru
- 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- 		trace_spi_transfer_start(msg, xfer);
- 
-+		xfer->last_in_message_list =
-+			list_is_last(&xfer->transfer_list, &msg->transfers);
-+
- 		spi_statistics_add_transfer_stats(statm, xfer, ctlr);
- 		spi_statistics_add_transfer_stats(stats, xfer, ctlr);
- 
diff --git a/target/linux/cns3xxx/patches-4.19/080-sata_support.patch b/target/linux/cns3xxx/patches-4.19/080-sata_support.patch
deleted file mode 100644
index 20871916fb..0000000000
--- a/target/linux/cns3xxx/patches-4.19/080-sata_support.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -37,12 +37,23 @@ static struct scsi_host_template ahci_pl
- 	AHCI_SHT(DRV_NAME),
- };
- 
-+static const struct ata_port_info cns3xxx_port_info = {
-+	.flags		= AHCI_FLAG_COMMON,
-+	.pio_mask	= ATA_PIO4,
-+	.udma_mask	= ATA_UDMA6,
-+	.port_ops	= &ahci_pmp_retry_srst_ops,
-+};
-+
- static int ahci_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
- 	struct ahci_host_priv *hpriv;
-+	const struct ata_port_info *info = &ahci_port_info;
- 	int rc;
- 
-+	if (IS_ENABLED(CONFIG_ARCH_CNS3XXX))
-+		info = &cns3xxx_port_info;
-+
- 	hpriv = ahci_platform_get_resources(pdev,
- 					    AHCI_PLATFORM_GET_RESETS);
- 	if (IS_ERR(hpriv))
diff --git a/target/linux/cns3xxx/patches-4.19/090-timers.patch b/target/linux/cns3xxx/patches-4.19/090-timers.patch
deleted file mode 100644
index b3810f8c9b..0000000000
--- a/target/linux/cns3xxx/patches-4.19/090-timers.patch
+++ /dev/null
@@ -1,105 +0,0 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -138,6 +138,7 @@ static int cns3xxx_set_oneshot(struct cl
- 
- 	/* period set, and timer enabled in 'next_event' hook */
- 	ctrl |= (1 << 2) | (1 << 9);
-+	writel(0, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
- 	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- 	return 0;
- }
-@@ -148,7 +149,7 @@ static int cns3xxx_set_periodic(struct c
- 	int pclk = cns3xxx_cpu_clock() / 8;
- 	int reload;
- 
--	reload = pclk * 20 / (3 * HZ) * 0x25000;
-+	reload = pclk * 1000000 / HZ;
- 	writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
- 	ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
- 	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-@@ -175,8 +176,8 @@ static struct clock_event_device cns3xxx
- 	.set_state_oneshot	= cns3xxx_set_oneshot,
- 	.tick_resume		= cns3xxx_shutdown,
- 	.set_next_event		= cns3xxx_timer_set_next_event,
--	.rating			= 350,
--	.cpumask		= cpu_all_mask,
-+	.rating			= 300,
-+	.cpumask		= cpu_possible_mask,
- };
- 
- static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
-@@ -220,6 +221,32 @@ static void __init cns3xxx_init_twd(void
- 	twd_local_timer_register(&cns3xx_twd_local_timer);
- }
- 
-+static u64 cns3xxx_get_cycles(struct clocksource *cs)
-+{
-+  u64 val;
-+
-+  val = readl(cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-+  val &= 0xffff;
-+
-+  return ((val << 32) | readl(cns3xxx_tmr1 + TIMER_FREERUN_OFFSET));
-+}
-+
-+static struct clocksource clocksource_cns3xxx = {
-+	.name = "freerun",
-+	.rating = 200,
-+	.read = cns3xxx_get_cycles,
-+	.mask = CLOCKSOURCE_MASK(48),
-+	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+static void __init cns3xxx_clocksource_init(void)
-+{
-+	/* Reset the FreeRunning counter */
-+	writel((1 << 16), cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-+
-+	clocksource_register_khz(&clocksource_cns3xxx, 100);
-+}
-+
- /*
-  * Set up the clock source and clock events devices
-  */
-@@ -237,13 +264,12 @@ static void __init __cns3xxx_timer_init(
- 	/* stop free running timer3 */
- 	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
- 
--	/* timer1 */
--	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
--	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
--
- 	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
- 	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
- 
-+	val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ;
-+	writel(val, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-+
- 	/* mask irq, non-mask timer1 overflow */
- 	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
- 	irq_mask &= ~(1 << 2);
-@@ -255,23 +281,9 @@ static void __init __cns3xxx_timer_init(
- 	val |= (1 << 9);
- 	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- 
--	/* timer2 */
--	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
--	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
--
--	/* mask irq */
--	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
--	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
--	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
--
--	/* down counter */
--	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
--	val |= (1 << 10);
--	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
--
--	/* Make irqs happen for the system timer */
- 	setup_irq(timer_irq, &cns3xxx_timer_irq);
- 
-+	cns3xxx_clocksource_init();
- 	cns3xxx_clockevents_init(timer_irq);
- 	cns3xxx_init_twd();
- }
diff --git a/target/linux/cns3xxx/patches-4.19/093-add-virt-pci-io-mapping.patch b/target/linux/cns3xxx/patches-4.19/093-add-virt-pci-io-mapping.patch
deleted file mode 100644
index 0fa7ed483f..0000000000
--- a/target/linux/cns3xxx/patches-4.19/093-add-virt-pci-io-mapping.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/mach-cns3xxx/cns3xxx.h
-+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
-@@ -162,11 +162,13 @@
- #define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
- 
- #define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
-+#define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
- 
- #define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
- #define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
- 
- #define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
-+#define CNS3XXX_PCIE0_IO_BASE_VIRT		0xE2000000
- 
- #define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
- #define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
-@@ -175,13 +177,16 @@
- #define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
- 
- #define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
-+#define CNS3XXX_PCIE0_MSG_BASE_VIRT		0xE5000000
- 
- #define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
-+#define CNS3XXX_PCIE1_MEM_BASE_VIRT		0xE8000000
- 
- #define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
- #define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
- 
- #define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
-+#define CNS3XXX_PCIE1_IO_BASE_VIRT		0xEA000000
- 
- #define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
- #define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
-@@ -190,6 +195,7 @@
- #define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
- 
- #define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
-+#define CNS3XXX_PCIE1_MSG_BASE_VIRT		0xED000000
- 
- /*
-  * Testchip peripheral and fpga gic regions
diff --git a/target/linux/cns3xxx/patches-4.19/095-gpio_support.patch b/target/linux/cns3xxx/patches-4.19/095-gpio_support.patch
deleted file mode 100644
index 8345f2f144..0000000000
--- a/target/linux/cns3xxx/patches-4.19/095-gpio_support.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/arm/mach-cns3xxx/cns3420vb.c
-+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
-@@ -223,6 +223,10 @@ static void __init cns3420_init(void)
- 
- 	cns3xxx_ahci_init();
- 	cns3xxx_sdhci_init();
-+	cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA,
-+		NR_IRQS_CNS3XXX);
-+	cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB,
-+		NR_IRQS_CNS3XXX + 32);
- 
- 	pm_power_off = cns3xxx_power_off;
- }
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -3,6 +3,8 @@ menuconfig ARCH_CNS3XXX
- 	bool "Cavium Networks CNS3XXX family"
- 	depends on ARCH_MULTI_V6
- 	select ARM_GIC
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GENERIC_IRQ_CHIP
- 	select HAVE_ARM_SCU if SMP
- 	select HAVE_ARM_TWD
- 	select HAVE_SMP
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -2,7 +2,7 @@
- ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
- 
- obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
--cns3xxx-y				+= core.o pm.o
-+cns3xxx-y				+= core.o pm.o gpio.o
- cns3xxx-$(CONFIG_ATAGS)			+= devices.o
- cns3xxx-$(CONFIG_PCI)			+= pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
---- a/arch/arm/mach-cns3xxx/cns3xxx.h
-+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
-@@ -68,8 +68,10 @@
- #define SMC_PCELL_ID_3_OFFSET			0xFFC
- 
- #define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
-+#define CNS3XXX_GPIOA_BASE_VIRT			0xFB006000
- 
- #define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
-+#define CNS3XXX_GPIOB_BASE_VIRT			0xFB007000
- 
- #define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
- 
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -50,6 +50,16 @@ static struct map_desc cns3xxx_io_desc[]
- 		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
- 		.length		= SZ_4K,
- 		.type		= MT_DEVICE,
-+	}, {
-+		.virtual	= CNS3XXX_GPIOA_BASE_VIRT,
-+		.pfn		= __phys_to_pfn(CNS3XXX_GPIOA_BASE),
-+		.length		= SZ_4K,
-+		.type		= MT_DEVICE,
-+	}, {
-+		.virtual	= CNS3XXX_GPIOB_BASE_VIRT,
-+		.pfn		= __phys_to_pfn(CNS3XXX_GPIOB_BASE),
-+		.length		= SZ_4K,
-+		.type		= MT_DEVICE,
- #ifdef CONFIG_PCI
- 	}, {
- 		.virtual	= CNS3XXX_PCIE0_HOST_BASE_VIRT,
diff --git a/target/linux/cns3xxx/patches-4.19/097-l2x0_cmdline_disable.patch b/target/linux/cns3xxx/patches-4.19/097-l2x0_cmdline_disable.patch
deleted file mode 100644
index b4720b11de..0000000000
--- a/target/linux/cns3xxx/patches-4.19/097-l2x0_cmdline_disable.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -307,13 +307,26 @@ void __init cns3xxx_timer_init(void)
- 
- #ifdef CONFIG_CACHE_L2X0
- 
--void __init cns3xxx_l2x0_init(void)
-+static int cns3xxx_l2x0_enable = 1;
-+
-+static int __init cns3xxx_l2x0_disable(char *s)
-+{
-+	cns3xxx_l2x0_enable = 0;
-+	return 1;
-+}
-+__setup("nol2x0", cns3xxx_l2x0_disable);
-+
-+static int __init cns3xxx_l2x0_init(void)
- {
--	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
-+	void __iomem *base;
- 	u32 val;
- 
-+	if (!cns3xxx_l2x0_enable)
-+		return 0;
-+
-+	base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
- 	if (WARN_ON(!base))
--		return;
-+		return 0;
- 
- 	/*
- 	 * Tag RAM Control register
-@@ -343,7 +356,10 @@ void __init cns3xxx_l2x0_init(void)
- 
- 	/* 32 KiB, 8-way, parity disable */
- 	l2x0_init(base, 0x00500000, 0xfe0f0fff);
-+
-+	return 0;
- }
-+arch_initcall(cns3xxx_l2x0_init);
- 
- #endif /* CONFIG_CACHE_L2X0 */
- 
---- a/arch/arm/mach-cns3xxx/cns3420vb.c
-+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
-@@ -217,8 +217,6 @@ static struct platform_device *cns3420_p
- 
- static void __init cns3420_init(void)
- {
--	cns3xxx_l2x0_init();
--
- 	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
- 
- 	cns3xxx_ahci_init();
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -16,12 +16,6 @@
- extern struct smp_operations cns3xxx_smp_ops;
- extern void cns3xxx_timer_init(void);
- 
--#ifdef CONFIG_CACHE_L2X0
--void __init cns3xxx_l2x0_init(void);
--#else
--static inline void cns3xxx_l2x0_init(void) {}
--#endif /* CONFIG_CACHE_L2X0 */
--
- #ifdef CONFIG_PCI
- extern void __init cns3xxx_pcie_init_late(void);
- #else
diff --git a/target/linux/cns3xxx/patches-4.19/100-laguna_support.patch b/target/linux/cns3xxx/patches-4.19/100-laguna_support.patch
deleted file mode 100644
index c0160d8f12..0000000000
--- a/target/linux/cns3xxx/patches-4.19/100-laguna_support.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -23,4 +23,12 @@ config MACH_CNS3420VB
- 	  This is a platform with an on-board ARM11 MPCore and has support
- 	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
- 
-+config MACH_GW2388
-+	bool "Support for Gateworks Laguna Platform"
-+	help
-+	  Include support for the Gateworks Laguna Platform
-+
-+	  This is a platform with an on-board ARM11 MPCore and has support
-+	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, I2C, GIG, etc.
-+
- endif
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -8,3 +8,5 @@ cns3xxx-$(CONFIG_PCI)			+= pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
- cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o cns3xxx_fiq.o
- cns3xxx-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
-+cns3xxx-$(CONFIG_MACH_GW2388)		+= laguna.o
-+
---- a/arch/arm/mach-cns3xxx/devices.c
-+++ b/arch/arm/mach-cns3xxx/devices.c
-@@ -16,6 +16,7 @@
- #include <linux/compiler.h>
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
-+#include <asm/mach-types.h>
- #include "cns3xxx.h"
- #include "pm.h"
- #include "core.h"
-@@ -101,7 +102,11 @@ void __init cns3xxx_sdhci_init(void)
- 	u32 gpioa_pins = __raw_readl(gpioa);
- 
- 	/* MMC/SD pins share with GPIOA */
--	gpioa_pins |= 0x1fff0004;
-+	if (machine_is_gw2388()) {
-+		gpioa_pins |= 0x1fff0000;
-+	} else {
-+		gpioa_pins |= 0x1fff0004;
-+	}
- 	__raw_writel(gpioa_pins, gpioa);
- 
- 	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
diff --git a/target/linux/cns3xxx/patches-4.19/101-laguna_sdhci_card_detect.patch b/target/linux/cns3xxx/patches-4.19/101-laguna_sdhci_card_detect.patch
deleted file mode 100644
index 72648a5f9f..0000000000
--- a/target/linux/cns3xxx/patches-4.19/101-laguna_sdhci_card_detect.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/drivers/mmc/host/sdhci-cns3xxx.c
-+++ b/drivers/mmc/host/sdhci-cns3xxx.c
-@@ -88,9 +88,9 @@ static const struct sdhci_pltfm_data sdh
- 	.ops = &sdhci_cns3xxx_ops,
- 	.quirks = SDHCI_QUIRK_BROKEN_DMA |
- 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
--		  SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
- 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
--		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
-+		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
-+		  SDHCI_QUIRK_BROKEN_CARD_DETECTION,
- };
- 
- static int sdhci_cns3xxx_probe(struct platform_device *pdev)
diff --git a/target/linux/cns3xxx/patches-4.19/110-pci_isolated_interrupts.patch b/target/linux/cns3xxx/patches-4.19/110-pci_isolated_interrupts.patch
deleted file mode 100644
index 800be813b8..0000000000
--- a/target/linux/cns3xxx/patches-4.19/110-pci_isolated_interrupts.patch
+++ /dev/null
@@ -1,95 +0,0 @@
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -18,6 +18,7 @@
- #include <linux/io.h>
- #include <linux/ioport.h>
- #include <linux/interrupt.h>
-+#include <linux/irq.h>
- #include <linux/ptrace.h>
- #include <asm/mach/map.h>
- #include "cns3xxx.h"
-@@ -27,7 +28,7 @@ struct cns3xxx_pcie {
- 	void __iomem *host_regs; /* PCI config registers for host bridge */
- 	void __iomem *cfg0_regs; /* PCI Type 0 config registers */
- 	void __iomem *cfg1_regs; /* PCI Type 1 config registers */
--	unsigned int irqs[2];
-+	unsigned int irqs[5];
- 	struct resource res_io;
- 	struct resource res_mem;
- 	int port;
-@@ -95,7 +96,7 @@ static inline int check_master_abort(str
- 		void __iomem *host_base;
- 		u32 sreg, ereg;
- 
--		host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
-+		host_base = (void __iomem *) cnspci->host_regs;
- 		sreg = __raw_readw(host_base + 0x6) & 0xF900;
- 		ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
- 
-@@ -209,7 +210,7 @@ static struct pci_ops cns3xxx_pcie_ops =
- static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
- 	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
--	int irq = cnspci->irqs[!!dev->bus->number];
-+	int irq = cnspci->irqs[!!dev->bus->number + pin - 1];
- 
- 	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
- 		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
-@@ -235,7 +236,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[
- 			.end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
- 			.flags = IORESOURCE_MEM,
- 		},
--		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
-+		.irqs = {
-+			IRQ_CNS3XXX_PCIE0_RC,
-+			IRQ_CNS3XXX_PCIE0_DEVICE,
-+			IRQ_CNS3XXX_PCIE0_DEVICE,
-+			IRQ_CNS3XXX_PCIE0_DEVICE,
-+			IRQ_CNS3XXX_PCIE0_DEVICE,
-+		},
- 		.port = 0,
- 	},
- 	[1] = {
-@@ -254,7 +261,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[
- 			.end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
- 			.flags = IORESOURCE_MEM,
- 		},
--		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
-+		.irqs = {
-+			IRQ_CNS3XXX_PCIE1_RC,
-+			IRQ_CNS3XXX_PCIE1_DEVICE,
-+			IRQ_CNS3XXX_PCIE1_DEVICE,
-+			IRQ_CNS3XXX_PCIE1_DEVICE,
-+			IRQ_CNS3XXX_PCIE1_DEVICE,
-+		},
- 		.port = 1,
- 	},
- };
-@@ -346,6 +359,14 @@ static int cns3xxx_pcie_abort_handler(un
- 	return 0;
- }
- 
-+void __init cns3xxx_pcie_set_irqs(int bus, int *irqs)
-+{
-+	int i;
-+
-+	for (i = 0; i < 4; i++)
-+		cns3xxx_pcie[bus].irqs[i + 1] = irqs[i];
-+}
-+
- void __init cns3xxx_pcie_init_late(void)
- {
- 	int i;
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -18,8 +18,10 @@ extern void cns3xxx_timer_init(void);
- 
- #ifdef CONFIG_PCI
- extern void __init cns3xxx_pcie_init_late(void);
-+extern void __init cns3xxx_pcie_set_irqs(int bus, int *irqs);
- #else
- static inline void __init cns3xxx_pcie_init_late(void) {}
-+static inline void cns3xxx_pcie_set_irqs(int bus, int *irqs) {}
- #endif
- 
- void __init cns3xxx_map_io(void);
diff --git a/target/linux/cns3xxx/patches-4.19/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch b/target/linux/cns3xxx/patches-4.19/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch
deleted file mode 100644
index 3276000fe4..0000000000
--- a/target/linux/cns3xxx/patches-4.19/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/pci/probe.c
-+++ b/drivers/pci/probe.c
-@@ -2634,7 +2634,8 @@ static void pcie_write_mrrs(struct pci_d
- 	 * In the "safe" case, do not configure the MRRS.  There appear to be
- 	 * issues with setting MRRS to 0 on a number of devices.
- 	 */
--	if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
-+	if (pcie_bus_config != PCIE_BUS_PERFORMANCE &&
-+	    pcie_bus_config != PCIE_BUS_PEER2PEER)
- 		return;
- 
- 	/*
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -868,7 +868,7 @@ enum pcie_bus_config_types {
- 	PCIE_BUS_DEFAULT,	/* Ensure MPS matches upstream bridge */
- 	PCIE_BUS_SAFE,		/* Use largest MPS boot-time devices support */
- 	PCIE_BUS_PERFORMANCE,	/* Use MPS and MRRS for best performance */
--	PCIE_BUS_PEER2PEER,	/* Set MPS = 128 for all devices */
-+	PCIE_BUS_PEER2PEER,	/* set MPS and MRSS to 128 for all devices */
- };
- 
- extern enum pcie_bus_config_types pcie_bus_config;
diff --git a/target/linux/cns3xxx/patches-4.19/200-broadcom_phy_reinit.patch b/target/linux/cns3xxx/patches-4.19/200-broadcom_phy_reinit.patch
deleted file mode 100644
index b0c3299d85..0000000000
--- a/target/linux/cns3xxx/patches-4.19/200-broadcom_phy_reinit.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -429,7 +429,11 @@ static int bcm5481_config_aneg(struct ph
- 	ret = genphy_config_aneg(phydev);
- 
- 	/* Then we can set up the delay. */
--	bcm5481x_config(phydev);
-+	//bcm5481x_config(phydev);
-+
-+	phy_write(phydev, 0x18, 0xf1e7);
-+	phy_write(phydev, 0x1c, 0x8e00);
-+	phy_write(phydev, 0x1c, 0xa41f);
- 
- 	if (of_property_read_bool(np, "enet-phy-lane-swap")) {
- 		/* Lane Swap - Undocumented register...magic! */
diff --git a/target/linux/cns3xxx/patches-4.19/210-dwc2_defaults.patch b/target/linux/cns3xxx/patches-4.19/210-dwc2_defaults.patch
deleted file mode 100644
index 5a5b17d0a0..0000000000
--- a/target/linux/cns3xxx/patches-4.19/210-dwc2_defaults.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/drivers/usb/dwc2/params.c
-+++ b/drivers/usb/dwc2/params.c
-@@ -151,6 +151,36 @@ static void dwc2_set_stm32f7_hsotg_param
- 	p->host_perio_tx_fifo_size = 256;
- }
- 
-+static void dwc2_set_cns3xxx_params(struct dwc2_hsotg *hsotg)
-+{
-+	struct dwc2_core_params *p = &hsotg->params;
-+
-+	p->otg_cap			= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;	/* non-HNP/non-SRP capable */
-+	p->host_dma			= 1;
-+	p->dma_desc_enable		= 0;
-+	p->speed			= DWC2_SPEED_PARAM_HIGH;	/* High Speed */
-+	p->enable_dynamic_fifo		= 1;
-+	p->en_multiple_tx_fifo		= 1;
-+	p->host_rx_fifo_size		= 658;	/* 774 DWORDs */
-+	p->host_nperio_tx_fifo_size	= 128;	/* 256 DWORDs */
-+	p->host_perio_tx_fifo_size	= 658;	/* 512 DWORDs */
-+	p->max_transfer_size		= 65535,
-+	p->max_packet_count		= 511;
-+	p->host_channels		= 16;
-+	p->phy_type			= DWC2_PHY_TYPE_PARAM_UTMI;	/* UTMI */
-+	p->phy_utmi_width		= 16;	/* 8 bits */
-+	p->phy_ulpi_ddr			= 0;	/* Single */
-+	p->phy_ulpi_ext_vbus		= 0;
-+	p->i2c_enable			= 0;
-+	p->ulpi_fs_ls			= 0;
-+	p->host_support_fs_ls_low_power	= 0;
-+	p->host_ls_low_power_phy_clk	= 0;	/* 48 MHz */
-+	p->ts_dline			= 0;
-+	p->reload_ctl			= 0;
-+	p->ahbcfg			= 0x10;
-+	p->uframe_sched			= false;
-+}
-+
- const struct of_device_id dwc2_of_match_table[] = {
- 	{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
- 	{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params  },
-@@ -806,17 +836,23 @@ int dwc2_get_hwparams(struct dwc2_hsotg
- 
- int dwc2_init_params(struct dwc2_hsotg *hsotg)
- {
-+	/*
- 	const struct of_device_id *match;
- 	void (*set_params)(void *data);
-+	*/
- 
- 	dwc2_set_default_params(hsotg);
- 	dwc2_get_device_properties(hsotg);
- 
-+	/*
- 	match = of_match_device(dwc2_of_match_table, hsotg->dev);
- 	if (match && match->data) {
- 		set_params = match->data;
- 		set_params(hsotg);
- 	}
-+	*/
-+
-+	dwc2_set_cns3xxx_params(hsotg);
- 
- 	dwc2_check_params(hsotg);
- 
diff --git a/target/linux/gemini/Makefile b/target/linux/gemini/Makefile
index 867e284714..304e515980 100644
--- a/target/linux/gemini/Makefile
+++ b/target/linux/gemini/Makefile
@@ -14,7 +14,6 @@ CPU_TYPE:=fa526
 MAINTAINER:=Roman Yeryomin <roman@advem.lv>
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 define Target/Description
 	Build firmware images for the StorLink/Cortina Gemini CS351x ARM FA526 CPU
diff --git a/target/linux/gemini/patches-4.19/0001-pinctrl-gemini-Mask-and-set-properly.patch b/target/linux/gemini/patches-4.19/0001-pinctrl-gemini-Mask-and-set-properly.patch
deleted file mode 100644
index 3bf9341e34..0000000000
--- a/target/linux/gemini/patches-4.19/0001-pinctrl-gemini-Mask-and-set-properly.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From f8ac3d3472a8dc99c8647a637611d146d88be8cb Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Tue, 9 Oct 2018 10:09:14 +0200
-Subject: [PATCH 01/18] pinctrl: gemini: Mask and set properly
-
-The code was written under the assumption that the
-regmap_update_bits() would mask the bits in the mask and
-set the bits in the value.
-
-It missed the points that it will not set bits in the value
-unless these are also masked in the mask. Set value bits
-that are not in the mask will simply be ignored.
-
-Fixes: 06351d133dea ("pinctrl: add a Gemini SoC pin controller")
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -2184,7 +2184,8 @@ static int gemini_pmx_set_mux(struct pin
- 		 func->name, grp->name);
- 
- 	regmap_read(pmx->map, GLOBAL_MISC_CTRL, &before);
--	regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL, grp->mask,
-+	regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL,
-+			   grp->mask | grp->value,
- 			   grp->value);
- 	regmap_read(pmx->map, GLOBAL_MISC_CTRL, &after);
- 
diff --git a/target/linux/gemini/patches-4.19/0002-pinctrl-gemini-Fix-up-TVC-clock-group.patch b/target/linux/gemini/patches-4.19/0002-pinctrl-gemini-Fix-up-TVC-clock-group.patch
deleted file mode 100644
index 64172acb44..0000000000
--- a/target/linux/gemini/patches-4.19/0002-pinctrl-gemini-Fix-up-TVC-clock-group.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From ce81398dccb984855de606b75db25eddecdaa9e5 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 10 Oct 2018 20:25:39 +0200
-Subject: [PATCH 02/18] pinctrl: gemini: Fix up TVC clock group
-
-The previous fix made the TVC clock get muxed in on the
-D-Link DIR-685 instead of giving nagging warnings of this
-not working. Not good. We didn't want that, as it breaks
-video.
-
-Create a specific group for the TVC CLK, and break out
-a specific GPIO group for it on the SL3516 so we can use
-that line as GPIO if we don't need the TVC CLK.
-
-Fixes: d17f477c5bc6 ("pinctrl: gemini: Mask and set properly")
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 44 ++++++++++++++++++++++++++------
- 1 file changed, 36 insertions(+), 8 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -591,13 +591,16 @@ static const unsigned int tvc_3512_pins[
- 	319, /* TVC_DATA[1] */
- 	301, /* TVC_DATA[2] */
- 	283, /* TVC_DATA[3] */
--	265, /* TVC_CLK */
- 	320, /* TVC_DATA[4] */
- 	302, /* TVC_DATA[5] */
- 	284, /* TVC_DATA[6] */
- 	266, /* TVC_DATA[7] */
- };
- 
-+static const unsigned int tvc_clk_3512_pins[] = {
-+	265, /* TVC_CLK */
-+};
-+
- /* NAND flash pins */
- static const unsigned int nflash_3512_pins[] = {
- 	199, 200, 201, 202, 216, 217, 218, 219, 220, 234, 235, 236, 237, 252,
-@@ -629,7 +632,7 @@ static const unsigned int pflash_3512_pi
- /* Serial flash pins CE0, CE1, DI, DO, CK */
- static const unsigned int sflash_3512_pins[] = { 230, 231, 232, 233, 211 };
- 
--/* The GPIO0A (0) pin overlap with TVC and extended parallel flash */
-+/* The GPIO0A (0) pin overlap with TVC CLK and extended parallel flash */
- static const unsigned int gpio0a_3512_pins[] = { 265 };
- 
- /* The GPIO0B (1-4) pins overlap with TVC and ICE */
-@@ -823,7 +826,13 @@ static const struct gemini_pin_group gem
- 		.num_pins = ARRAY_SIZE(tvc_3512_pins),
- 		/* Conflict with character LCD and ICE */
- 		.mask = LCD_PADS_ENABLE,
--		.value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE,
-+		.value = TVC_PADS_ENABLE,
-+	},
-+	{
-+		.name = "tvcclkgrp",
-+		.pins = tvc_clk_3512_pins,
-+		.num_pins = ARRAY_SIZE(tvc_clk_3512_pins),
-+		.value = TVC_CLK_PAD_ENABLE,
- 	},
- 	/*
- 	 * The construction is done such that it is possible to use a serial
-@@ -860,8 +869,8 @@ static const struct gemini_pin_group gem
- 		.name = "gpio0agrp",
- 		.pins = gpio0a_3512_pins,
- 		.num_pins = ARRAY_SIZE(gpio0a_3512_pins),
--		/* Conflict with TVC */
--		.mask = TVC_PADS_ENABLE,
-+		/* Conflict with TVC CLK */
-+		.mask = TVC_CLK_PAD_ENABLE,
- 	},
- 	{
- 		.name = "gpio0bgrp",
-@@ -1531,13 +1540,16 @@ static const unsigned int tvc_3516_pins[
- 	311, /* TVC_DATA[1] */
- 	394, /* TVC_DATA[2] */
- 	374, /* TVC_DATA[3] */
--	333, /* TVC_CLK */
- 	354, /* TVC_DATA[4] */
- 	395, /* TVC_DATA[5] */
- 	312, /* TVC_DATA[6] */
- 	334, /* TVC_DATA[7] */
- };
- 
-+static const unsigned int tvc_clk_3516_pins[] = {
-+	333, /* TVC_CLK */
-+};
-+
- /* NAND flash pins */
- static const unsigned int nflash_3516_pins[] = {
- 	243, 260, 261, 224, 280, 262, 281, 264, 300, 263, 282, 301, 320, 283,
-@@ -1570,7 +1582,7 @@ static const unsigned int pflash_3516_pi
- static const unsigned int sflash_3516_pins[] = { 296, 338, 295, 359, 339 };
- 
- /* The GPIO0A (0-4) pins overlap with TVC and extended parallel flash */
--static const unsigned int gpio0a_3516_pins[] = { 333, 354, 395, 312, 334 };
-+static const unsigned int gpio0a_3516_pins[] = { 354, 395, 312, 334 };
- 
- /* The GPIO0B (5-7) pins overlap with ICE */
- static const unsigned int gpio0b_3516_pins[] = { 375, 396, 376 };
-@@ -1602,6 +1614,9 @@ static const unsigned int gpio0j_3516_pi
- /* The GPIO0K (30,31) pins overlap with NAND flash */
- static const unsigned int gpio0k_3516_pins[] = { 275, 298 };
- 
-+/* The GPIO0L (0) pins overlap with TVC_CLK */
-+static const unsigned int gpio0l_3516_pins[] = { 333 };
-+
- /* The GPIO1A (0-4) pins that overlap with IDE and parallel flash */
- static const unsigned int gpio1a_3516_pins[] = { 221, 200, 222, 201, 220 };
- 
-@@ -1761,7 +1776,13 @@ static const struct gemini_pin_group gem
- 		.num_pins = ARRAY_SIZE(tvc_3516_pins),
- 		/* Conflict with character LCD */
- 		.mask = LCD_PADS_ENABLE,
--		.value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE,
-+		.value = TVC_PADS_ENABLE,
-+	},
-+	{
-+		.name = "tvcclkgrp",
-+		.pins = tvc_clk_3516_pins,
-+		.num_pins = ARRAY_SIZE(tvc_clk_3516_pins),
-+		.value = TVC_CLK_PAD_ENABLE,
- 	},
- 	/*
- 	 * The construction is done such that it is possible to use a serial
-@@ -1873,6 +1894,13 @@ static const struct gemini_pin_group gem
- 		.value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE,
- 	},
- 	{
-+		.name = "gpio0lgrp",
-+		.pins = gpio0l_3516_pins,
-+		.num_pins = ARRAY_SIZE(gpio0l_3516_pins),
-+		/* Conflict with TVE CLK */
-+		.mask = TVC_CLK_PAD_ENABLE,
-+	},
-+	{
- 		.name = "gpio1agrp",
- 		.pins = gpio1a_3516_pins,
- 		.num_pins = ARRAY_SIZE(gpio1a_3516_pins),
diff --git a/target/linux/gemini/patches-4.19/0003-pinctrl-gemini-Drop-noisy-debug-prints.patch b/target/linux/gemini/patches-4.19/0003-pinctrl-gemini-Drop-noisy-debug-prints.patch
deleted file mode 100644
index d3383b3182..0000000000
--- a/target/linux/gemini/patches-4.19/0003-pinctrl-gemini-Drop-noisy-debug-prints.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 5d1bd9669ddcd26384672891c37110046e1ac8e8 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Tue, 9 Oct 2018 10:12:24 +0200
-Subject: [PATCH 03/18] pinctrl: gemini: Drop noisy debug prints
-
-The dev_info() in the pin control driver is really just good
-for debug, so drop it.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 32 ++++++++++++++++----------------
- 1 file changed, 16 insertions(+), 16 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -2207,9 +2207,9 @@ static int gemini_pmx_set_mux(struct pin
- 		return -ENODEV;
- 	}
- 
--	dev_info(pmx->dev,
--		 "ACTIVATE function \"%s\" with group \"%s\"\n",
--		 func->name, grp->name);
-+	dev_dbg(pmx->dev,
-+		"ACTIVATE function \"%s\" with group \"%s\"\n",
-+		func->name, grp->name);
- 
- 	regmap_read(pmx->map, GLOBAL_MISC_CTRL, &before);
- 	regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL,
-@@ -2240,10 +2240,10 @@ static int gemini_pmx_set_mux(struct pin
- 				"GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n",
- 				before, after, expected);
- 		} else {
--			dev_info(pmx->dev,
--				 "padgroup %s %s\n",
--				 gemini_padgroups[i],
--				 enabled ? "enabled" : "disabled");
-+			dev_dbg(pmx->dev,
-+				"padgroup %s %s\n",
-+				gemini_padgroups[i],
-+				enabled ? "enabled" : "disabled");
- 		}
- 	}
- 
-@@ -2262,10 +2262,10 @@ static int gemini_pmx_set_mux(struct pin
- 				"GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n",
- 				before, after, expected);
- 		} else {
--			dev_info(pmx->dev,
--				 "padgroup %s %s\n",
--				 gemini_padgroups[i],
--				 enabled ? "enabled" : "disabled");
-+			dev_dbg(pmx->dev,
-+				"padgroup %s %s\n",
-+				gemini_padgroups[i],
-+				enabled ? "enabled" : "disabled");
- 		}
- 	}
- 
-@@ -2492,9 +2492,9 @@ static int gemini_pinconf_group_set(stru
- 			regmap_update_bits(pmx->map, GLOBAL_IODRIVE,
- 					   grp->driving_mask,
- 					   val);
--			dev_info(pmx->dev,
--				 "set group %s to %d mA drive strength mask %08x val %08x\n",
--				 grp->name, arg, grp->driving_mask, val);
-+			dev_dbg(pmx->dev,
-+				"set group %s to %d mA drive strength mask %08x val %08x\n",
-+				grp->name, arg, grp->driving_mask, val);
- 			break;
- 		default:
- 			dev_err(pmx->dev, "invalid config param %04x\n", param);
-@@ -2585,8 +2585,8 @@ static int gemini_pmx_probe(struct platf
- 	/* Print initial state */
- 	tmp = val;
- 	for_each_set_bit(i, &tmp, PADS_MAXBIT) {
--		dev_info(dev, "pad group %s %s\n", gemini_padgroups[i],
--			 (val & BIT(i)) ? "enabled" : "disabled");
-+		dev_dbg(dev, "pad group %s %s\n", gemini_padgroups[i],
-+			(val & BIT(i)) ? "enabled" : "disabled");
- 	}
- 
- 	/* Check if flash pin is set */
diff --git a/target/linux/gemini/patches-4.19/0004-boot-sq201-from-sda1.patch b/target/linux/gemini/patches-4.19/0004-boot-sq201-from-sda1.patch
deleted file mode 100644
index d2fa02a957..0000000000
--- a/target/linux/gemini/patches-4.19/0004-boot-sq201-from-sda1.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 95be54e285767c5209bb51df923373f78b8c4099 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 16 Jul 2018 23:36:30 +0200
-Subject: [PATCH 04/18] boot sq201 from sda1
-
----
- arch/arm/boot/dts/gemini-sq201.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini-sq201.dts
-@@ -20,7 +20,7 @@
- 	};
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200n8";
-+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
- 		stdout-path = &uart0;
- 	};
- 
diff --git a/target/linux/gemini/patches-4.19/0005-mtd-physmap_of-Move-custom-initialization.patch b/target/linux/gemini/patches-4.19/0005-mtd-physmap_of-Move-custom-initialization.patch
deleted file mode 100644
index 5462844a79..0000000000
--- a/target/linux/gemini/patches-4.19/0005-mtd-physmap_of-Move-custom-initialization.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 58ecb60d53d43e8d584708722a2cf851ba88f9e1 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 11 Oct 2018 19:53:40 +0200
-Subject: [PATCH 05/18] mtd: physmap_of: Move custom initialization
-
-In order to be able to assign custom complex mappings
-to the physmap_of plugin for Gemini, move the initialization
-so that the simple map is initialized before we enter the
-platform-specific functions so the latter can override
-them.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/mtd/maps/physmap_of_core.c | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
---- a/drivers/mtd/maps/physmap_of_core.c
-+++ b/drivers/mtd/maps/physmap_of_core.c
-@@ -239,13 +239,6 @@ static int of_flash_probe(struct platfor
- 		else if (of_property_read_bool(dp, "little-endian"))
- 			info->list[i].map.swap = CFI_LITTLE_ENDIAN;
- 
--		err = of_flash_probe_gemini(dev, dp, &info->list[i].map);
--		if (err)
--			goto err_out;
--		err = of_flash_probe_versatile(dev, dp, &info->list[i].map);
--		if (err)
--			goto err_out;
--
- 		err = -ENOMEM;
- 		info->list[i].map.virt = ioremap(info->list[i].map.phys,
- 						 info->list[i].map.size);
-@@ -257,6 +250,14 @@ static int of_flash_probe(struct platfor
- 
- 		simple_map_init(&info->list[i].map);
- 
-+		/* Variants can override map accessors */
-+		err = of_flash_probe_gemini(dev, dp, &info->list[i].map);
-+		if (err)
-+			goto err_out;
-+		err = of_flash_probe_versatile(dev, dp, &info->list[i].map);
-+		if (err)
-+			goto err_out;
-+
- 		/*
- 		 * On some platforms (e.g. MPC5200) a direct 1:1 mapping
- 		 * may cause problems with JFFS2 usage, as the local bus (LPB)
diff --git a/target/linux/gemini/patches-4.19/0006-mtd-physmap_of_gemini-Handle-pin-control.patch b/target/linux/gemini/patches-4.19/0006-mtd-physmap_of_gemini-Handle-pin-control.patch
deleted file mode 100644
index 128760d78a..0000000000
--- a/target/linux/gemini/patches-4.19/0006-mtd-physmap_of_gemini-Handle-pin-control.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From 8e5e628a9de439d02914b85a48e1ac3e04ea486a Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 11 Oct 2018 20:03:49 +0200
-Subject: [PATCH 06/18] mtd: physmap_of_gemini: Handle pin control
-
-This enables the complex mapping for the Gemini and kicks in
-custom read/write functions that will wrap the existing
-simple functions in calls to enable/disable the parallel
-flash pins using pin controls.
-
-This is necessary on some hardware such as the D-Link
-DIR-685 where all flash pins are patched in/out at the same
-time, but some of the flash pins are in practice unused by
-the flash and have anyway been reused as GPIO.
-
-This concerns specifically CE1 on the Gemini. There is only
-one flash chip, so only CE0 is used, and the line for CE1
-has been reused as chip select for the emulated SPI port
-connected to the display. If we try to use the same lines
-for flash and GPIO at the same time, one of them will loose:
-the GPIO line will disappear because it gets disconnected
-from the pin when the flash group is muxed out.
-
-Fix this by introducing two pin control states named simply
-"enabled" and "disabled" and only enable the flash lines
-when absolutely necessary (during read/write/copy). This
-way, they are available for GPIO at all other times and
-the display works.
-
-Collect all the state variables in a struct named
-struct gemini_flash and allocate this struct at probe
-time.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/mtd/maps/Kconfig             |   1 +
- drivers/mtd/maps/physmap_of_gemini.c | 105 ++++++++++++++++++++++++++-
- 2 files changed, 105 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -89,6 +89,7 @@ config MTD_PHYSMAP_OF_GEMINI
- 	depends on MTD_PHYSMAP_OF
- 	depends on MFD_SYSCON
- 	default ARCH_GEMINI
-+	select MTD_COMPLEX_MAPPINGS
- 	help
- 	  This provides some extra DT physmap parsing for the Gemini
- 	  platforms, some detection and setting up parallel mode on the
---- a/drivers/mtd/maps/physmap_of_gemini.c
-+++ b/drivers/mtd/maps/physmap_of_gemini.c
-@@ -10,9 +10,11 @@
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/mtd/map.h>
-+#include <linux/mtd/xip.h>
- #include <linux/mfd/syscon.h>
- #include <linux/regmap.h>
- #include <linux/bitops.h>
-+#include <linux/pinctrl/consumer.h>
- #include "physmap_of_gemini.h"
- 
- /*
-@@ -49,6 +51,77 @@ static const struct of_device_id syscon_
- 	{ },
- };
- 
-+struct gemini_flash {
-+	struct device *dev;
-+	struct pinctrl *p;
-+	struct pinctrl_state *enabled_state;
-+	struct pinctrl_state *disabled_state;
-+};
-+
-+/* Static local state */
-+static struct gemini_flash *gf;
-+
-+static void gemini_flash_enable_pins(void)
-+{
-+	int ret;
-+
-+	if (IS_ERR(gf->enabled_state))
-+		return;
-+	ret = pinctrl_select_state(gf->p, gf->enabled_state);
-+	if (ret)
-+		dev_err(gf->dev, "failed to enable pins\n");
-+}
-+
-+static void gemini_flash_disable_pins(void)
-+{
-+	int ret;
-+
-+	if (IS_ERR(gf->disabled_state))
-+		return;
-+	ret = pinctrl_select_state(gf->p, gf->disabled_state);
-+	if (ret)
-+		dev_err(gf->dev, "failed to disable pins\n");
-+}
-+
-+static map_word __xipram gemini_flash_map_read(struct map_info *map,
-+					       unsigned long ofs)
-+{
-+	map_word __xipram ret;
-+
-+	gemini_flash_enable_pins();
-+	ret = inline_map_read(map, ofs);
-+	gemini_flash_disable_pins();
-+
-+	return ret;
-+}
-+
-+static void __xipram gemini_flash_map_write(struct map_info *map,
-+					    const map_word datum,
-+					    unsigned long ofs)
-+{
-+	gemini_flash_enable_pins();
-+	inline_map_write(map, datum, ofs);
-+	gemini_flash_disable_pins();
-+}
-+
-+static void __xipram gemini_flash_map_copy_from(struct map_info *map,
-+						void *to, unsigned long from,
-+						ssize_t len)
-+{
-+	gemini_flash_enable_pins();
-+	inline_map_copy_from(map, to, from, len);
-+	gemini_flash_disable_pins();
-+}
-+
-+static void __xipram gemini_flash_map_copy_to(struct map_info *map,
-+					      unsigned long to,
-+					      const void *from, ssize_t len)
-+{
-+	gemini_flash_enable_pins();
-+	inline_map_copy_to(map, to, from, len);
-+	gemini_flash_disable_pins();
-+}
-+
- int of_flash_probe_gemini(struct platform_device *pdev,
- 			  struct device_node *np,
- 			  struct map_info *map)
-@@ -62,6 +135,11 @@ int of_flash_probe_gemini(struct platfor
- 	if (!of_device_is_compatible(np, "cortina,gemini-flash"))
- 		return 0;
- 
-+	gf = devm_kzalloc(dev, sizeof(*gf), GFP_KERNEL);
-+	if (!gf)
-+		return -ENOMEM;
-+	gf->dev = dev;
-+
- 	rmap = syscon_regmap_lookup_by_phandle(np, "syscon");
- 	if (IS_ERR(rmap)) {
- 		dev_err(dev, "no syscon\n");
-@@ -96,7 +174,32 @@ int of_flash_probe_gemini(struct platfor
- 				 map->bankwidth * 8);
- 	}
- 
--	dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n");
-+	gf->p = devm_pinctrl_get(dev);
-+	if (IS_ERR(gf->p)) {
-+		dev_err(dev, "no pinctrl handle\n");
-+		ret = PTR_ERR(gf->p);
-+		return ret;
-+	}
-+
-+	gf->enabled_state = pinctrl_lookup_state(gf->p, "enabled");
-+	if (IS_ERR(gf->enabled_state))
-+		dev_err(dev, "no enabled pin control state\n");
-+
-+	gf->disabled_state = pinctrl_lookup_state(gf->p, "disabled");
-+	if (IS_ERR(gf->enabled_state)) {
-+		dev_err(dev, "no disabled pin control state\n");
-+	} else {
-+		ret = pinctrl_select_state(gf->p, gf->disabled_state);
-+		if (ret)
-+			dev_err(gf->dev, "failed to disable pins\n");
-+	}
-+
-+	map->read = gemini_flash_map_read;
-+	map->write = gemini_flash_map_write;
-+	map->copy_from = gemini_flash_map_copy_from;
-+	map->copy_to = gemini_flash_map_copy_to;
-+
-+	dev_info(dev, "initialized Gemini-specific physmap control\n");
- 
- 	return 0;
- }
diff --git a/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch b/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch
deleted file mode 100644
index 372242c68b..0000000000
--- a/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From 74631102645df8984acbdf67b731e4d437f27fed Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 11 Oct 2018 20:06:23 +0200
-Subject: [PATCH 08/18] ARM: dts: Enable Gemini flash access
-
-Some Gemini platforms have a parallel NOR flash which conflicts
-with use cases reusing some of the flash lines (such as CE1)
-for GPIO.
-
-Fix this on the D-Link DIR-685 and Itian SQ201 by creating
-"enabled" and "disabled" states for the flash pin control
-handle, and rely on the flash handling code to switch this
-in and out when accessed so these lines can be used
-for GPIO when flash is not accessed, and enable flash
-access.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 35 +++++++++++++++-------
- arch/arm/boot/dts/gemini-sq201.dts         | 31 ++++++++++---------
- 2 files changed, 41 insertions(+), 25 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -64,7 +64,6 @@
- 		gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- 		gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- 		gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
--		/* Collides with pflash CE1, not so cool */
- 		cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- 		num-chipselects = <1>;
- 
-@@ -253,15 +252,18 @@
- 	soc {
- 		flash@30000000 {
- 			/*
--			 * Flash access is by default disabled, because it
--			 * collides with the Chip Enable signal for the display
--			 * panel, that reuse the parallel flash Chip Select 1
--			 * (CS1). Enabling flash makes graphics stop working.
--			 *
--			 * We might be able to hack around this by letting
--			 * GPIO poke around in the flash controller registers.
-+			 * Flash access collides with the Chip Enable signal for
-+			 * the display panel, that reuse the parallel flash Chip
-+			 * Select 1 (CS1). We switch the pin control state so we
-+			 * enable these pins for flash access only when we need
-+			 * then, and when disabled they can be used for GPIO which
-+			 * is what the display panel needs.
- 			 */
--			/* status = "okay"; */
-+			status = "okay";
-+			pinctrl-names = "enabled", "disabled";
-+			pinctrl-0 = <&pflash_default_pins>;
-+			pinctrl-1 = <&pflash_disabled_pins>;
-+
- 			/* 32MB of flash */
- 			reg = <0x30000000 0x02000000>;
- 
-@@ -327,7 +329,6 @@
- 						"gpio0cgrp",
- 						"gpio0egrp",
- 						"gpio0fgrp",
--						"gpio0ggrp",
- 						"gpio0hgrp";
- 					};
- 				};
-@@ -342,6 +343,18 @@
- 						groups = "gpio1bgrp";
- 					};
- 				};
-+				/*
-+				 * These GPIO groups will be mapped in over some
-+				 * of the flash pins when the flash is not in
-+				 * active use.
-+				 */
-+				pflash_disabled_pins: pinctrl-pflash-disabled {
-+					mux {
-+						function = "gpio0";
-+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
-+							 "gpio0kgrp";
-+					};
-+				};
- 				pinctrl-gmii {
- 					mux {
- 						function = "gmii";
-@@ -430,7 +443,7 @@
- 		};
- 
- 		display-controller@6a000000 {
--			status = "okay";
-+			status = "disabled";
- 
- 			port@0 {
- 				reg = <0>;
---- a/arch/arm/boot/dts/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini-sq201.dts
-@@ -41,14 +41,12 @@
- 		compatible = "gpio-leds";
- 		led-green-info {
- 			label = "sq201:green:info";
--			/* Conflict with parallel flash */
- 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";
- 			linux,default-trigger = "heartbeat";
- 		};
- 		led-green-usb {
- 			label = "sq201:green:usb";
--			/* Conflict with parallel and NAND flash */
- 			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
- 			default-state = "off";
- 			linux,default-trigger = "usb-host";
-@@ -126,15 +124,10 @@
- 
- 	soc {
- 		flash@30000000 {
--			/*
--			 * Flash access can be enabled, with the side effect
--			 * of disabling access to GPIO LED on GPIO0[20] which
--			 * reuse one of the parallel flash chip select lines.
--			 * Also the default firmware on the machine has the
--			 * problem that since it uses the flash, the two LEDS
--			 * on the right become numb.
--			 */
--			/* status = "okay"; */
-+			status = "okay";
-+			pinctrl-names = "enabled", "disabled";
-+			pinctrl-0 = <&pflash_default_pins>;
-+			pinctrl-1 = <&pflash_disabled_pins>;
- 			/* 16MB of flash */
- 			reg = <0x30000000 0x01000000>;
- 
-@@ -184,9 +177,7 @@
- 					mux {
- 						function = "gpio0";
- 						groups = "gpio0fgrp",
--						"gpio0ggrp",
--						"gpio0hgrp",
--						"gpio0kgrp";
-+						"gpio0hgrp";
- 					};
- 				};
- 				/*
-@@ -199,6 +190,18 @@
- 						groups = "gpio1dgrp";
- 					};
- 				};
-+				/*
-+				 * These GPIO groups will be mapped in over some
-+				 * of the flash pins when the flash is not in
-+				 * active use.
-+				 */
-+				pflash_disabled_pins: pinctrl-pflash-disabled {
-+					mux {
-+						function = "gpio0";
-+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
-+							 "gpio0kgrp";
-+					};
-+				};
- 				pinctrl-gmii {
- 					mux {
- 						function = "gmii";
diff --git a/target/linux/gemini/patches-4.19/0009-mtd-partitions-Add-RedBoot-FIS-DT-bindings.patch b/target/linux/gemini/patches-4.19/0009-mtd-partitions-Add-RedBoot-FIS-DT-bindings.patch
deleted file mode 100644
index bc3c927db8..0000000000
--- a/target/linux/gemini/patches-4.19/0009-mtd-partitions-Add-RedBoot-FIS-DT-bindings.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 3dfe7ff875a64b83de21dad6365225f41f3cdb17 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 19 Oct 2018 08:22:18 +0200
-Subject: [PATCH 09/18] mtd: partitions: Add RedBoot FIS DT bindings
-
-This adds device tree bindings for the RedBoot FIS partition
-format.
-
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../bindings/mtd/partitions/redboot-fis.txt   | 27 +++++++++++++++++++
- 1 file changed, 27 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt
-@@ -0,0 +1,27 @@
-+RedBoot FLASH Image System (FIS) Partitions
-+===========================================
-+
-+The FLASH Image System (FIS) directory is a flash description
-+format closely associated with the RedBoot boot loader.
-+
-+It uses one single flash eraseblock in the flash to store an index of
-+all images in the flash.
-+
-+This block size will vary depending on flash but is typically
-+32 KB in size.
-+
-+Required properties:
-+- compatible : (required) must be "redboot-fis"
-+- fis-index-block : (required) a index to the eraseblock containing
-+  the FIS directory on this device. On a flash memory with 32KB
-+  eraseblocks, 0 means the first eraseblock at 0x00000000, 1 means the
-+  second eraseblock at 0x00008000 and so on.
-+
-+Example:
-+
-+flash@0 {
-+	partitions {
-+		compatible = "redboot-fis";
-+		fis-index-block = <0>;
-+	};
-+};
diff --git a/target/linux/gemini/patches-4.19/0010-mtd-partitions-Add-second-compatible-for-redboot.patch b/target/linux/gemini/patches-4.19/0010-mtd-partitions-Add-second-compatible-for-redboot.patch
deleted file mode 100644
index d888e78187..0000000000
--- a/target/linux/gemini/patches-4.19/0010-mtd-partitions-Add-second-compatible-for-redboot.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From e1b9d122030220d8b8176d9e23568e26fa2f9d23 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 19 Oct 2018 08:56:41 +0200
-Subject: [PATCH 10/18] mtd: partitions: Add second compatible for redboot
-
-Simple backport of the upstream redboot partition table
-bindings that are used in the mainline Linux kernel.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/mtd/redboot.c | 29 ++++++++++++++++++++++++++++-
- 1 file changed, 28 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -25,7 +25,7 @@
- #include <linux/slab.h>
- #include <linux/init.h>
- #include <linux/vmalloc.h>
--
-+#include <linux/of.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/module.h>
-@@ -56,6 +56,31 @@ static inline int redboot_checksum(struc
- 	return 1;
- }
- 
-+#ifdef CONFIG_OF
-+static void parse_redboot_of(struct mtd_info *master)
-+{
-+	struct device_node *np;
-+	u32 dirblock;
-+	int ret;
-+
-+	np = mtd_get_of_node(master);
-+	if (!np)
-+		return;
-+	ret = of_property_read_u32(np, "fis-index-block", &dirblock);
-+	if (ret)
-+		return;
-+	/*
-+	 * Assign the block found in the device tree to the local
-+	 * directory block pointer.
-+	 */
-+	directory = dirblock;
-+}
-+#else
-+static void parse_redboot_of(struct mtd_info *master)
-+{
-+}
-+#endif
-+
- static int parse_redboot_partitions(struct mtd_info *master,
- 				    const struct mtd_partition **pparts,
- 				    struct mtd_part_parser_data *data)
-@@ -75,6 +100,7 @@ static int parse_redboot_partitions(stru
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 	static char nullstring[] = "unallocated";
- #endif
-+	parse_redboot_of(master);
- 
- 	if ( directory < 0 ) {
- 		offset = master->size + directory * master->erasesize;
-@@ -298,6 +324,7 @@ static int parse_redboot_partitions(stru
- 
- static const struct of_device_id redboot_parser_of_match_table[] = {
- 	{ .compatible = "ecoscentric,redboot-fis-partitions" },
-+	{ .compatible = "redboot-fis" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, redboot_parser_of_match_table);
diff --git a/target/linux/gemini/patches-4.19/0011-ARM-dts-Fix-up-SQ201-flash-access.patch b/target/linux/gemini/patches-4.19/0011-ARM-dts-Fix-up-SQ201-flash-access.patch
deleted file mode 100644
index 7517d62ed3..0000000000
--- a/target/linux/gemini/patches-4.19/0011-ARM-dts-Fix-up-SQ201-flash-access.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 186692e51e6c40d8ebd05d25f009098eb00f8110 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 19 Oct 2018 09:00:51 +0200
-Subject: [PATCH 11/18] ARM: dts: Fix up SQ201 flash access
-
-This sets the partition information on the SQ201 to be read
-out from the RedBoot partition table, removes the static
-partition table and sets our boot options to mount root from
-/dev/mtdblock2 where the initramfs resides.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-sq201.dts | 37 ++++--------------------------
- 1 file changed, 5 insertions(+), 32 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini-sq201.dts
-@@ -20,7 +20,7 @@
- 	};
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
-+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
- 		stdout-path = &uart0;
- 	};
- 
-@@ -131,37 +131,10 @@
- 			/* 16MB of flash */
- 			reg = <0x30000000 0x01000000>;
- 
--			partition@0 {
--				label = "RedBoot";
--				reg = <0x00000000 0x00120000>;
--				read-only;
--			};
--			partition@120000 {
--				label = "Kernel";
--				reg = <0x00120000 0x00200000>;
--			};
--			partition@320000 {
--				label = "Ramdisk";
--				reg = <0x00320000 0x00600000>;
--			};
--			partition@920000 {
--				label = "Application";
--				reg = <0x00920000 0x00600000>;
--			};
--			partition@f20000 {
--				label = "VCTL";
--				reg = <0x00f20000 0x00020000>;
--				read-only;
--			};
--			partition@f40000 {
--				label = "CurConf";
--				reg = <0x00f40000 0x000a0000>;
--				read-only;
--			};
--			partition@fe0000 {
--				label = "FIS directory";
--				reg = <0x00fe0000 0x00020000>;
--				read-only;
-+			partitions {
-+				compatible = "redboot-fis";
-+				/* Eraseblock at 0xfe0000 */
-+				fis-index-block = <0x1fc>;
- 			};
- 		};
- 
diff --git a/target/linux/gemini/patches-4.19/0012-ARM-dts-Blank-D-Link-DIR-685-console.patch b/target/linux/gemini/patches-4.19/0012-ARM-dts-Blank-D-Link-DIR-685-console.patch
deleted file mode 100644
index ebddc3ab90..0000000000
--- a/target/linux/gemini/patches-4.19/0012-ARM-dts-Blank-D-Link-DIR-685-console.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From ec8b953c92c1dd0e0f1450f4b9a32c60125d4510 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 27 Aug 2018 00:10:39 +0200
-Subject: [PATCH 12/18] ARM: dts: Blank D-Link DIR-685 console
-
-Leaving this NAS with display and backlight on heats it up
-and dissipates power. Turn off the screen after 4 minutes,
-it comes back on when a user touches the keys.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -20,7 +20,7 @@
- 	};
- 
- 	chosen {
--		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
-+		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
- 		stdout-path = "uart0:19200n8";
- 	};
- 
diff --git a/target/linux/gemini/patches-4.19/0013-usb-host-fotg2-add-silicon-clock-handling.patch b/target/linux/gemini/patches-4.19/0013-usb-host-fotg2-add-silicon-clock-handling.patch
deleted file mode 100644
index b28454e6f1..0000000000
--- a/target/linux/gemini/patches-4.19/0013-usb-host-fotg2-add-silicon-clock-handling.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From e76906e8e9dfaeeb22a37706aca493b86e4367bd Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 20:46:12 +0200
-Subject: [PATCH 13/18] usb: host: fotg2: add silicon clock handling
-
-When used in a system with software-controlled silicon clocks,
-the FOTG210 needs to grab, prepare and enable the clock.
-
-This is needed on for example the Cortina Gemini, where the
-platform will by default gate off the clock unless the
-peripheral (in this case the USB driver) grabs and enables
-the clock.
-
-If there is no clock available on the platform, we live
-without it. Make sure to percolate probe deferrals.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v2:
-- Handle probe deferrals on the clock controller, no matter
-  how unlikely they are.
-- Send the patch to get Gemini USB rolling and try to get some
-  stuff upstream, this patch should be fine on its own.
----
- drivers/usb/host/fotg210-hcd.c | 33 +++++++++++++++++++++++++++++----
- drivers/usb/host/fotg210.h     |  3 +++
- 2 files changed, 32 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -31,6 +31,7 @@
- #include <linux/uaccess.h>
- #include <linux/platform_device.h>
- #include <linux/io.h>
-+#include <linux/clk.h>
- 
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5596,7 +5597,7 @@ static int fotg210_hcd_probe(struct plat
- 	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- 	if (IS_ERR(hcd->regs)) {
- 		retval = PTR_ERR(hcd->regs);
--		goto failed;
-+		goto failed_put_hcd;
- 	}
- 
- 	hcd->rsrc_start = res->start;
-@@ -5606,22 +5607,42 @@ static int fotg210_hcd_probe(struct plat
- 
- 	fotg210->caps = hcd->regs;
- 
-+	/* It's OK not to supply this clock */
-+	fotg210->pclk = clk_get(dev, "PCLK");
-+	if (!IS_ERR(fotg210->pclk)) {
-+		retval = clk_prepare_enable(fotg210->pclk);
-+		if (retval) {
-+			dev_err(dev, "failed to enable PCLK\n");
-+			goto failed_put_hcd;
-+		}
-+	} else if (PTR_ERR(fotg210->pclk) == -EPROBE_DEFER) {
-+		/*
-+		 * Percolate deferrals, for anything else,
-+		 * just live without the clocking.
-+		 */
-+		retval = PTR_ERR(fotg210->pclk);
-+		goto failed_dis_clk;
-+	}
-+
- 	retval = fotg210_setup(hcd);
- 	if (retval)
--		goto failed;
-+		goto failed_dis_clk;
- 
- 	fotg210_init(fotg210);
- 
- 	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- 	if (retval) {
- 		dev_err(dev, "failed to add hcd with err %d\n", retval);
--		goto failed;
-+		goto failed_dis_clk;
- 	}
- 	device_wakeup_enable(hcd->self.controller);
- 
- 	return retval;
- 
--failed:
-+failed_dis_clk:
-+	if (!IS_ERR(fotg210->pclk))
-+		clk_disable_unprepare(fotg210->pclk);
-+failed_put_hcd:
- 	usb_put_hcd(hcd);
- fail_create_hcd:
- 	dev_err(dev, "init %s fail, %d\n", dev_name(dev), retval);
-@@ -5637,6 +5658,10 @@ static int fotg210_hcd_remove(struct pla
- {
- 	struct device *dev = &pdev->dev;
- 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-+	struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
-+
-+	if (!IS_ERR(fotg210->pclk))
-+		clk_disable_unprepare(fotg210->pclk);
- 
- 	if (!hcd)
- 		return 0;
---- a/drivers/usb/host/fotg210.h
-+++ b/drivers/usb/host/fotg210.h
-@@ -182,6 +182,9 @@ struct fotg210_hcd {			/* one per contro
- #	define COUNT(x)
- #endif
- 
-+	/* silicon clock */
-+	struct clk		*pclk;
-+
- 	/* debug files */
- 	struct dentry		*debug_dir;
- };
diff --git a/target/linux/gemini/patches-4.19/0014-usb-host-add-DT-bindings-for-faraday-fotg2.patch b/target/linux/gemini/patches-4.19/0014-usb-host-add-DT-bindings-for-faraday-fotg2.patch
deleted file mode 100644
index 4bac72a5d1..0000000000
--- a/target/linux/gemini/patches-4.19/0014-usb-host-add-DT-bindings-for-faraday-fotg2.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From f9cfc45c57227448d4239e9582258587aacf34e7 Mon Sep 17 00:00:00 2001
-From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Date: Wed, 8 Feb 2017 21:00:09 +0100
-Subject: [PATCH 14/18] usb: host: add DT bindings for faraday fotg2
-
-This adds device tree bindings for the Faraday FOTG2
-dual-mode host controller.
-
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v2:
-- Changed "OTH" to "OTG"
-- Collected Rob's ACK.
-- I don't see any problem with these bindings, but IIRC Hans
-  had some reservations for the OTG mode, maybe we can strip
-  some properties like the mini-usb thing and use as a starter
-  so we can add host mode at least?
----
- .../bindings/usb/faraday,fotg210.txt          | 35 +++++++++++++++++++
- 1 file changed, 35 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/usb/faraday,fotg210.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
-@@ -0,0 +1,35 @@
-+Faraday FOTG Host controller
-+
-+This OTG-capable USB host controller is found in Cortina Systems
-+Gemini and other SoC products.
-+
-+Required properties:
-+- compatible: should be one of:
-+  "faraday,fotg210"
-+  "cortina,gemini-usb", "faraday,fotg210"
-+- reg: should contain one register range i.e. start and length
-+- interrupts: description of the interrupt line
-+
-+Optional properties:
-+- clocks: should contain the IP block clock
-+- clock-names: should be "PCLK" for the IP block clock
-+
-+Required properties for "cortina,gemini-usb" compatible:
-+- syscon: a phandle to the system controller to access PHY registers
-+
-+Optional properties for "cortina,gemini-usb" compatible:
-+- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
-+  OTG connector is in use
-+- wakeup-source: see power/wakeup-source.txt
-+
-+Example for Gemini:
-+
-+usb@68000000 {
-+	compatible = "cortina,gemini-usb", "faraday,fotg210";
-+	reg = <0x68000000 0x1000>;
-+	interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-+	clocks = <&cc 12>;
-+	clock-names = "PCLK";
-+	syscon = <&syscon>;
-+	wakeup-source;
-+};
diff --git a/target/linux/gemini/patches-4.19/0015-usb-host-fotg2-add-device-tree-probing.patch b/target/linux/gemini/patches-4.19/0015-usb-host-fotg2-add-device-tree-probing.patch
deleted file mode 100644
index 8950ef040f..0000000000
--- a/target/linux/gemini/patches-4.19/0015-usb-host-fotg2-add-device-tree-probing.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 8f45c69ba80a993a6dba2397825b27e11fa9dea7 Mon Sep 17 00:00:00 2001
-From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Date: Thu, 9 Feb 2017 15:20:49 +0100
-Subject: [PATCH 15/18] usb: host: fotg2: add device tree probing
-
-Add device tree probing to the fotg2 driver.
-
-Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-[Drop DMA mask coercion, drivers/of/platform.c does the job]
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/fotg210-hcd.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -10,6 +10,7 @@
-  * Most of code borrowed from the Linux-3.7 EHCI driver
-  */
- #include <linux/module.h>
-+#include <linux/of.h>
- #include <linux/device.h>
- #include <linux/dmapool.h>
- #include <linux/kernel.h>
-@@ -5672,9 +5673,18 @@ static int fotg210_hcd_remove(struct pla
- 	return 0;
- }
- 
-+#ifdef CONFIG_OF
-+static const struct of_device_id fotg210_of_match[] = {
-+	{ .compatible = "faraday,fotg210" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, fotg210_of_match);
-+#endif
-+
- static struct platform_driver fotg210_hcd_driver = {
- 	.driver = {
- 		.name   = "fotg210-hcd",
-+		.of_match_table = of_match_ptr(fotg210_of_match),
- 	},
- 	.probe  = fotg210_hcd_probe,
- 	.remove = fotg210_hcd_remove,
diff --git a/target/linux/gemini/patches-4.19/0016-usb-host-fotg2-add-Gemini-specific-handling.patch b/target/linux/gemini/patches-4.19/0016-usb-host-fotg2-add-Gemini-specific-handling.patch
deleted file mode 100644
index 51bd0e7d7e..0000000000
--- a/target/linux/gemini/patches-4.19/0016-usb-host-fotg2-add-Gemini-specific-handling.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From b331ae758123ba20ba41199e007ac33fc0f242e3 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 22:19:00 +0200
-Subject: [PATCH 16/18] usb: host: fotg2: add Gemini-specific handling
-
-The Cortina Systems Gemini has bolted on a PHY inside the
-silicon that can be handled by six bits in a MISC register in
-the system controller.
-
-If we are running on Gemini, look up a syscon regmap through
-a phandle and enable VBUS and optionally the Mini-B connector.
-
-If the device is flagged as "wakeup-source" using the standard
-DT bindings, we also enable this in the global controller for
-respective port.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/Kconfig       |  1 +
- drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++
- 2 files changed, 77 insertions(+)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -372,6 +372,7 @@ config USB_ISP1362_HCD
- config USB_FOTG210_HCD
- 	tristate "FOTG210 HCD support"
- 	depends on USB && HAS_DMA && HAS_IOMEM
-+	select MFD_SYSCON
- 	---help---
- 	  Faraday FOTG210 is an OTG controller which can be configured as
- 	  an USB2.0 host. It is designed to meet USB2.0 EHCI specification
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -33,6 +33,10 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/clk.h>
-+#include <linux/bitops.h>
-+/* For Cortina Gemini */
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
- 
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5554,6 +5558,72 @@ static void fotg210_init(struct fotg210_
- 	iowrite32(value, &fotg210->regs->otgcsr);
- }
- 
-+/*
-+ * Gemini-specific initialization function, only executed on the
-+ * Gemini SoC using the global misc control register.
-+ */
-+#define GEMINI_GLOBAL_MISC_CTRL		0x30
-+#define GEMINI_MISC_USB0_WAKEUP		BIT(14)
-+#define GEMINI_MISC_USB1_WAKEUP		BIT(15)
-+#define GEMINI_MISC_USB0_VBUS_ON	BIT(22)
-+#define GEMINI_MISC_USB1_VBUS_ON	BIT(23)
-+#define GEMINI_MISC_USB0_MINI_B		BIT(29)
-+#define GEMINI_MISC_USB1_MINI_B		BIT(30)
-+
-+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
-+{
-+	struct device_node *np = dev->of_node;
-+	struct regmap *map;
-+	bool mini_b;
-+	bool wakeup;
-+	u32 mask, val;
-+	int ret;
-+
-+	map = syscon_regmap_lookup_by_phandle(np, "syscon");
-+	if (IS_ERR(map)) {
-+		dev_err(dev, "no syscon\n");
-+		return PTR_ERR(map);
-+	}
-+	mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
-+	wakeup = of_property_read_bool(np, "wakeup-source");
-+
-+	/*
-+	 * Figure out if this is USB0 or USB1 by simply checking the
-+	 * physical base address.
-+	 */
-+	mask = 0;
-+	if (hcd->rsrc_start == 0x69000000) {
-+		val = GEMINI_MISC_USB1_VBUS_ON;
-+		if (mini_b)
-+			val |= GEMINI_MISC_USB1_MINI_B;
-+		else
-+			mask |= GEMINI_MISC_USB1_MINI_B;
-+		if (wakeup)
-+			val |= GEMINI_MISC_USB1_WAKEUP;
-+		else
-+			mask |= GEMINI_MISC_USB1_WAKEUP;
-+	} else {
-+		val = GEMINI_MISC_USB0_VBUS_ON;
-+		if (mini_b)
-+			val |= GEMINI_MISC_USB0_MINI_B;
-+		else
-+			mask |= GEMINI_MISC_USB0_MINI_B;
-+		if (wakeup)
-+			val |= GEMINI_MISC_USB0_WAKEUP;
-+		else
-+			mask |= GEMINI_MISC_USB0_WAKEUP;
-+	}
-+
-+	ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
-+	if (ret) {
-+		dev_err(dev, "failed to initialize Gemini PHY\n");
-+		return ret;
-+	}
-+
-+	dev_info(dev, "initialized Gemini PHY\n");
-+	return 0;
-+}
-+
- /**
-  * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
-  *
-@@ -5631,6 +5701,12 @@ static int fotg210_hcd_probe(struct plat
- 
- 	fotg210_init(fotg210);
- 
-+	if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
-+		retval = fotg210_gemini_init(dev, hcd);
-+		if (retval)
-+			goto failed_dis_clk;
-+	}
-+
- 	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- 	if (retval) {
- 		dev_err(dev, "failed to add hcd with err %d\n", retval);
diff --git a/target/linux/gemini/patches-4.19/0017-usb-host-fotg2-restart-hcd-after-port-reset.patch b/target/linux/gemini/patches-4.19/0017-usb-host-fotg2-restart-hcd-after-port-reset.patch
deleted file mode 100644
index 0b5e81ce54..0000000000
--- a/target/linux/gemini/patches-4.19/0017-usb-host-fotg2-restart-hcd-after-port-reset.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From b9d300b5aea18f2e992201d182d939030130aab2 Mon Sep 17 00:00:00 2001
-From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Date: Sat, 14 Apr 2018 18:49:57 +0200
-Subject: [PATCH 17/18] usb: host: fotg2: restart hcd after port reset
-
-on Gemini SoC FOTG2 stalls after port reset
-rerstart the hcd.
-
-Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/fotg210-hcd.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -1633,6 +1633,10 @@ static int fotg210_hub_control(struct us
- 			/* see what we found out */
- 			temp = check_reset_complete(fotg210, wIndex, status_reg,
- 					fotg210_readl(fotg210, status_reg));
-+
-+			/* restart schedule */
-+			fotg210->command |= CMD_RUN;
-+			fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
- 		}
- 
- 		if (!(temp & (PORT_RESUME|PORT_RESET))) {
diff --git a/target/linux/gemini/patches-4.19/0018-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini-boards.patch b/target/linux/gemini/patches-4.19/0018-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini-boards.patch
deleted file mode 100644
index 83d993b1f9..0000000000
--- a/target/linux/gemini/patches-4.19/0018-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini-boards.patch
+++ /dev/null
@@ -1,191 +0,0 @@
-From 1ff9a279dbeb0034929042faef186ce934474c2b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 20:50:22 +0200
-Subject: [PATCH 18/18] ARM: dts: Add the FOTG210 USB host to Gemini boards
-
-This adds the FOTG210 USB host controller to the Gemini
-device trees. In the main SoC DTSI it is flagged as disabled
-and then it is selectively enabled on the devices that utilize
-it.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v2:
-- Rebased to kernel v4.19-rc1
-- Drop pinctrl-0 handle from the second USB port
-- Add comment on how to deal with the USB pin control
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts |  8 ++++++
- arch/arm/boot/dts/gemini-nas4220b.dts      |  8 ++++++
- arch/arm/boot/dts/gemini-rut1xx.dts        | 20 ++++++++++++++
- arch/arm/boot/dts/gemini-sl93512r.dts      |  8 ++++++
- arch/arm/boot/dts/gemini-sq201.dts         |  8 ++++++
- arch/arm/boot/dts/gemini-wbd111.dts        |  8 ++++++
- arch/arm/boot/dts/gemini-wbd222.dts        |  8 ++++++
- arch/arm/boot/dts/gemini.dtsi              | 32 ++++++++++++++++++++++
- 8 files changed, 100 insertions(+)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -452,5 +452,13 @@
- 				};
- 			};
- 		};
-+
-+		usb@68000000 {
-+			status = "okay";
-+		};
-+
-+		usb@69000000 {
-+			status = "okay";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -204,5 +204,13 @@
- 		ata@63400000 {
- 			status = "okay";
- 		};
-+
-+		usb@68000000 {
-+			status = "okay";
-+		};
-+
-+		usb@69000000 {
-+			status = "okay";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/gemini-rut1xx.dts
-+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
-@@ -124,5 +124,25 @@
- 				/* Not used in this platform */
- 			};
- 		};
-+
-+		ethernet@60000000 {
-+			status = "okay";
-+
-+			ethernet-port@0 {
-+				phy-mode = "rgmii";
-+				phy-handle = <&phy0>;
-+			};
-+			ethernet-port@1 {
-+				/* Not used in this platform */
-+			};
-+		};
-+
-+		usb@68000000 {
-+			status = "okay";
-+		};
-+
-+		usb@69000000 {
-+			status = "okay";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/gemini-sl93512r.dts
-+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
-@@ -324,5 +324,13 @@
- 		ata@63400000 {
- 			status = "okay";
- 		};
-+
-+		usb@68000000 {
-+			status = "okay";
-+		};
-+
-+		usb@69000000 {
-+			status = "okay";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini-sq201.dts
-@@ -292,5 +292,13 @@
- 		ata@63000000 {
- 			status = "okay";
- 		};
-+
-+		usb@68000000 {
-+			status = "okay";
-+		};
-+
-+		usb@69000000 {
-+			status = "okay";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/gemini-wbd111.dts
-+++ b/arch/arm/boot/dts/gemini-wbd111.dts
-@@ -171,5 +171,13 @@
- 				/* Not used in this platform */
- 			};
- 		};
-+
-+		usb@68000000 {
-+			status = "okay";
-+		};
-+
-+		usb@69000000 {
-+			status = "okay";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/gemini-wbd222.dts
-+++ b/arch/arm/boot/dts/gemini-wbd222.dts
-@@ -183,5 +183,13 @@
- 				phy-handle = <&phy1>;
- 			};
- 		};
-+
-+		usb@68000000 {
-+			status = "okay";
-+		};
-+
-+		usb@69000000 {
-+			status = "okay";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/gemini.dtsi
-+++ b/arch/arm/boot/dts/gemini.dtsi
-@@ -409,5 +409,37 @@
- 			#size-cells = <0>;
- 			status = "disabled";
- 		};
-+
-+		usb@68000000 {
-+			compatible = "cortina,gemini-usb", "faraday,fotg210";
-+			reg = <0x68000000 0x1000>;
-+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-+			resets = <&syscon GEMINI_RESET_USB0>;
-+			clocks = <&syscon GEMINI_CLK_GATE_USB0>;
-+			clock-names = "PCLK";
-+			/*
-+			 * This will claim pins for USB0 and USB1 at the same
-+			 * time as they are using some common pins. If you for
-+			 * some reason have a system using USB1 at 96000000 but
-+			 * NOT using USB0 at 68000000 you wll have to add the
-+			 * usb_default_pins to the USB controller at 96000000
-+			 * in your .dts for the board.
-+			 */
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&usb_default_pins>;
-+			syscon = <&syscon>;
-+			status = "disabled";
-+		};
-+
-+		usb@69000000 {
-+			compatible = "cortina,gemini-usb", "faraday,fotg210";
-+			reg = <0x69000000 0x1000>;
-+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-+			resets = <&syscon GEMINI_RESET_USB1>;
-+			clocks = <&syscon GEMINI_CLK_GATE_USB1>;
-+			clock-names = "PCLK";
-+			syscon = <&syscon>;
-+			status = "disabled";
-+		};
- 	};
- };
diff --git a/target/linux/gemini/patches-4.19/0019-ARM-dts-gemini-Indent-DIR-685-partition-table.patch b/target/linux/gemini/patches-4.19/0019-ARM-dts-gemini-Indent-DIR-685-partition-table.patch
deleted file mode 100644
index c205b5f88d..0000000000
--- a/target/linux/gemini/patches-4.19/0019-ARM-dts-gemini-Indent-DIR-685-partition-table.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From 4a228ecf553e879bae384e634bb6413438e81a0e Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 11 Mar 2019 15:43:05 +0100
-Subject: [PATCH 1/2] ARM: dts: gemini: Indent DIR-685 partition table
-
-It is discouraged to have OF partitions as subnodes directly
-under the device, create a "partitions" subnode and put the
-partitions inside it.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 82 ++++++++++++----------
- 1 file changed, 44 insertions(+), 38 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -267,44 +267,50 @@
- 			/* 32MB of flash */
- 			reg = <0x30000000 0x02000000>;
- 
--			/*
--			 * This "RedBoot" is the Storlink derivative.
--			 */
--			partition@0 {
--				label = "RedBoot";
--				reg = <0x00000000 0x00040000>;
--				read-only;
--			};
--			/*
--			 * This firmware image contains the kernel catenated
--			 * with the squashfs root filesystem. For some reason
--			 * this is called "upgrade" on the vendor system.
--			 */
--			partition@40000 {
--				label = "upgrade";
--				reg = <0x00040000 0x01f40000>;
--				read-only;
--			};
--			/* RGDB, Residental Gateway Database? */
--			partition@1f80000 {
--				label = "rgdb";
--				reg = <0x01f80000 0x00040000>;
--				read-only;
--			};
--			/*
--			 * This partition contains MAC addresses for WAN,
--			 * WLAN and LAN, and the country code (for wireless
--			 * I guess).
--			 */
--			partition@1fc0000 {
--				label = "nvram";
--				reg = <0x01fc0000 0x00020000>;
--				read-only;
--			};
--			partition@1fe0000 {
--				label = "LangPack";
--				reg = <0x01fe0000 0x00020000>;
--				read-only;
-+			partitions {
-+				compatible = "fixed-partitions";
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+
-+				/*
-+				 * This "RedBoot" is the Storlink derivative.
-+				 */
-+				partition@0 {
-+					label = "RedBoot";
-+					reg = <0x00000000 0x00040000>;
-+					read-only;
-+				};
-+				/*
-+				 * This firmware image contains the kernel catenated
-+				 * with the squashfs root filesystem. For some reason
-+				 * this is called "upgrade" on the vendor system.
-+				 */
-+				partition@40000 {
-+					label = "upgrade";
-+					reg = <0x00040000 0x01f40000>;
-+					read-only;
-+				};
-+				/* RGDB, Residental Gateway Database? */
-+				partition@1f80000 {
-+					label = "rgdb";
-+					reg = <0x01f80000 0x00040000>;
-+					read-only;
-+				};
-+				/*
-+				 * This partition contains MAC addresses for WAN,
-+				 * WLAN and LAN, and the country code (for wireless
-+				 * I guess).
-+				 */
-+				partition@1fc0000 {
-+					label = "nvram";
-+					reg = <0x01fc0000 0x00020000>;
-+					read-only;
-+				};
-+				partition@1fe0000 {
-+					label = "LangPack";
-+					reg = <0x01fe0000 0x00020000>;
-+					read-only;
-+				};
- 			};
- 		};
- 
diff --git a/target/linux/gemini/patches-4.19/0020-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch b/target/linux/gemini/patches-4.19/0020-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
deleted file mode 100644
index bb4076558d..0000000000
--- a/target/linux/gemini/patches-4.19/0020-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 854934b0ce8e758ce581f5ddbc30e618ab46fbdb Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 11 Mar 2019 15:44:29 +0100
-Subject: [PATCH 2/2] ARM: dts: Augment DIR-685 partition table for OpenWrt
-
-Rename the firmware partition so that the firmware MTD
-splitter will do its job, drop the rootfs arguments as
-the MTD splitter will set this up automatically.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -20,7 +20,7 @@
- 	};
- 
- 	chosen {
--		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
-+		bootargs = "console=ttyS0,19200n8 consoleblank=300";
- 		stdout-path = "uart0:19200n8";
- 	};
- 
-@@ -286,7 +286,8 @@
- 				 * this is called "upgrade" on the vendor system.
- 				 */
- 				partition@40000 {
--					label = "upgrade";
-+					compatible = "wrg";
-+					label = "firmware";
- 					reg = <0x00040000 0x01f40000>;
- 					read-only;
- 				};
diff --git a/target/linux/generic/backport-4.19/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch b/target/linux/generic/backport-4.19/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
deleted file mode 100644
index 7ac4f9d240..0000000000
--- a/target/linux/generic/backport-4.19/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 13b1ecc3401653a355798eb1dee10cc1608202f4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 18 Jan 2016 12:27:49 +0100
-Subject: [PATCH 33/34] Kbuild: don't hardcode path to awk in
- scripts/ld-version.sh
-
-On some systems /usr/bin/awk does not exist, or is broken. Find it via
-$PATH instead.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- scripts/ld-version.sh | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/scripts/ld-version.sh
-+++ b/scripts/ld-version.sh
-@@ -1,6 +1,7 @@
--#!/usr/bin/awk -f
-+#!/bin/sh
- # SPDX-License-Identifier: GPL-2.0
- # extract linker version number from stdin and turn into single number
-+exec awk '
- 	{
- 	gsub(".*\\)", "");
- 	gsub(".*version ", "");
-@@ -9,3 +10,4 @@
- 	print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
- 	exit
- 	}
-+'
diff --git a/target/linux/generic/backport-4.19/011-kbuild-export-SUBARCH.patch b/target/linux/generic/backport-4.19/011-kbuild-export-SUBARCH.patch
deleted file mode 100644
index b5f654906a..0000000000
--- a/target/linux/generic/backport-4.19/011-kbuild-export-SUBARCH.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 173019b66dcc9d68ad9333aa744dad1e369b5aa8 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 9 Jul 2017 00:26:53 +0200
-Subject: [PATCH 34/34] kernel: add compile fix for linux 4.9 on x86
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -431,8 +431,8 @@ KBUILD_LDFLAGS_MODULE := -T $(srctree)/s
- KBUILD_LDFLAGS :=
- GCC_PLUGINS_CFLAGS :=
- 
--export ARCH SRCARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
--export CPP AR NM STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
-+export ARCH SRCARCH SUBARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD
-+export CC CPP AR NM STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
- export MAKE LEX YACC AWK GENKSYMS INSTALLKERNEL PERL PYTHON PYTHON2 PYTHON3 UTS_MACHINE
- export HOSTCXX KBUILD_HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
- 
diff --git a/target/linux/generic/backport-4.19/020-backport_netfilter_rtcache.patch b/target/linux/generic/backport-4.19/020-backport_netfilter_rtcache.patch
deleted file mode 100644
index 3a35381ce3..0000000000
--- a/target/linux/generic/backport-4.19/020-backport_netfilter_rtcache.patch
+++ /dev/null
@@ -1,558 +0,0 @@
-From 1bb0c3ec899827cfa4668bb63a08713a40744d21 Mon Sep 17 00:00:00 2001
-From: Florian Westphal <fw@strlen.de>
-Date: Sun, 9 Jul 2017 08:58:30 +0200
-Subject: [PATCH] netfilter: conntrack: cache route for forwarded connections
-
-... to avoid per-packet FIB lookup if possible.
-
-The cached dst is re-used provided the input interface
-is the same as that of the previous packet in the same direction.
-
-If not, the cached dst is invalidated.
-
-For ipv6 we also need to store sernum, else dst_check doesn't work,
-pointed out by Eric Dumazet.
-
-This should speed up forwarding when conntrack is already in use
-anyway, especially when using reverse path filtering -- active RPF
-enforces two FIB lookups for each packet.
-
-Before the routing cache removal this didn't matter since RPF was performed
-only when route cache didn't yield a result; but without route cache it
-comes at higher price.
-
-Julian Anastasov suggested to add NETDEV_UNREGISTER handler to
-avoid holding on to dsts of 'frozen' conntracks.
-
-Signed-off-by: Florian Westphal <fw@strlen.de>
----
- include/net/netfilter/nf_conntrack_extend.h  |   4 +
- include/net/netfilter/nf_conntrack_rtcache.h |  34 +++
- net/netfilter/Kconfig                        |  12 +
- net/netfilter/Makefile                       |   3 +
- net/netfilter/nf_conntrack_rtcache.c         | 428 +++++++++++++++++++++++++++
- 5 files changed, 481 insertions(+)
- create mode 100644 include/net/netfilter/nf_conntrack_rtcache.h
- create mode 100644 net/netfilter/nf_conntrack_rtcache.c
-
---- a/include/net/netfilter/nf_conntrack_extend.h
-+++ b/include/net/netfilter/nf_conntrack_extend.h
-@@ -28,6 +28,9 @@ enum nf_ct_ext_id {
- #if IS_ENABLED(CONFIG_NETFILTER_SYNPROXY)
- 	NF_CT_EXT_SYNPROXY,
- #endif
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
-+	NF_CT_EXT_RTCACHE,
-+#endif
- 	NF_CT_EXT_NUM,
- };
- 
-@@ -40,6 +43,7 @@ enum nf_ct_ext_id {
- #define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout
- #define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels
- #define NF_CT_EXT_SYNPROXY_TYPE struct nf_conn_synproxy
-+#define NF_CT_EXT_RTCACHE_TYPE struct nf_conn_rtcache
- 
- /* Extensions: optional stuff which isn't permanently in struct. */
- struct nf_ct_ext {
---- /dev/null
-+++ b/include/net/netfilter/nf_conntrack_rtcache.h
-@@ -0,0 +1,34 @@
-+#include <linux/gfp.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+
-+struct dst_entry;
-+
-+struct nf_conn_dst_cache {
-+	struct dst_entry *dst;
-+	int iif;
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+	u32 cookie;
-+#endif
-+
-+};
-+
-+struct nf_conn_rtcache {
-+	struct nf_conn_dst_cache cached_dst[IP_CT_DIR_MAX];
-+};
-+
-+static inline
-+struct nf_conn_rtcache *nf_ct_rtcache_find(const struct nf_conn *ct)
-+{
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
-+	return nf_ct_ext_find(ct, NF_CT_EXT_RTCACHE);
-+#else
-+	return NULL;
-+#endif
-+}
-+
-+static inline int nf_conn_rtcache_iif_get(const struct nf_conn_rtcache *rtc,
-+					  enum ip_conntrack_dir dir)
-+{
-+	return rtc->cached_dst[dir].iif;
-+}
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -135,6 +135,18 @@ config NF_CONNTRACK_EVENTS
- 
- 	  If unsure, say `N'.
- 
-+config NF_CONNTRACK_RTCACHE
-+	tristate "Cache route entries in conntrack objects"
-+	depends on NETFILTER_ADVANCED
-+	depends on NF_CONNTRACK
-+	help
-+	  If this option is enabled, the connection tracking code will
-+	  cache routing information for each connection that is being
-+	  forwarded, at a cost of 32 bytes per conntrack object.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+	  The module will be called nf_conntrack_rtcache.
-+
- config NF_CONNTRACK_TIMEOUT
- 	bool  'Connection tracking timeout'
- 	depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -25,6 +25,9 @@ obj-$(CONFIG_NETFILTER_NETLINK_OSF) += n
- # connection tracking
- obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o
- 
-+# optional conntrack route cache extension
-+obj-$(CONFIG_NF_CONNTRACK_RTCACHE) += nf_conntrack_rtcache.o
-+
- obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o
- 
- # netlink interface for nf_conntrack
---- /dev/null
-+++ b/net/netfilter/nf_conntrack_rtcache.c
-@@ -0,0 +1,428 @@
-+/* route cache for netfilter.
-+ *
-+ * (C) 2014 Red Hat GmbH
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/types.h>
-+#include <linux/netfilter.h>
-+#include <linux/skbuff.h>
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/netdevice.h>
-+#include <linux/export.h>
-+#include <linux/module.h>
-+
-+#include <net/dst.h>
-+
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_rtcache.h>
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+#include <net/ip6_fib.h>
-+#endif
-+
-+static void __nf_conn_rtcache_destroy(struct nf_conn_rtcache *rtc,
-+				      enum ip_conntrack_dir dir)
-+{
-+	struct dst_entry *dst = rtc->cached_dst[dir].dst;
-+
-+	dst_release(dst);
-+}
-+
-+static void nf_conn_rtcache_destroy(struct nf_conn *ct)
-+{
-+	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+
-+	if (!rtc)
-+		return;
-+
-+	__nf_conn_rtcache_destroy(rtc, IP_CT_DIR_ORIGINAL);
-+	__nf_conn_rtcache_destroy(rtc, IP_CT_DIR_REPLY);
-+}
-+
-+static void nf_ct_rtcache_ext_add(struct nf_conn *ct)
-+{
-+	struct nf_conn_rtcache *rtc;
-+
-+	rtc = nf_ct_ext_add(ct, NF_CT_EXT_RTCACHE, GFP_ATOMIC);
-+	if (rtc) {
-+		rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif = -1;
-+		rtc->cached_dst[IP_CT_DIR_ORIGINAL].dst = NULL;
-+		rtc->cached_dst[IP_CT_DIR_REPLY].iif = -1;
-+		rtc->cached_dst[IP_CT_DIR_REPLY].dst = NULL;
-+	}
-+}
-+
-+static struct nf_conn_rtcache *nf_ct_rtcache_find_usable(struct nf_conn *ct)
-+{
-+	return nf_ct_rtcache_find(ct);
-+}
-+
-+static struct dst_entry *
-+nf_conn_rtcache_dst_get(const struct nf_conn_rtcache *rtc,
-+			enum ip_conntrack_dir dir)
-+{
-+	return rtc->cached_dst[dir].dst;
-+}
-+
-+static u32 nf_rtcache_get_cookie(int pf, const struct dst_entry *dst)
-+{
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+	if (pf == NFPROTO_IPV6) {
-+		const struct rt6_info *rt = (const struct rt6_info *)dst;
-+
-+		if (rt->from && rt->from->fib6_node)
-+			return (u32)rt->from->fib6_node->fn_sernum;
-+	}
-+#endif
-+	return 0;
-+}
-+
-+static void nf_conn_rtcache_dst_set(int pf,
-+				    struct nf_conn_rtcache *rtc,
-+				    struct dst_entry *dst,
-+				    enum ip_conntrack_dir dir, int iif)
-+{
-+	if (rtc->cached_dst[dir].iif != iif)
-+		rtc->cached_dst[dir].iif = iif;
-+
-+	if (rtc->cached_dst[dir].dst != dst) {
-+		struct dst_entry *old;
-+
-+		dst_hold(dst);
-+
-+		old = xchg(&rtc->cached_dst[dir].dst, dst);
-+		dst_release(old);
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+		if (pf == NFPROTO_IPV6)
-+			rtc->cached_dst[dir].cookie =
-+				nf_rtcache_get_cookie(pf, dst);
-+#endif
-+	}
-+}
-+
-+static void nf_conn_rtcache_dst_obsolete(struct nf_conn_rtcache *rtc,
-+					 enum ip_conntrack_dir dir)
-+{
-+	struct dst_entry *old;
-+
-+	pr_debug("Invalidate iif %d for dir %d on cache %p\n",
-+		 rtc->cached_dst[dir].iif, dir, rtc);
-+
-+	old = xchg(&rtc->cached_dst[dir].dst, NULL);
-+	dst_release(old);
-+	rtc->cached_dst[dir].iif = -1;
-+}
-+
-+static unsigned int nf_rtcache_in(u_int8_t pf,
-+				  struct sk_buff *skb,
-+				  const struct nf_hook_state *state)
-+{
-+	struct nf_conn_rtcache *rtc;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	struct dst_entry *dst;
-+	struct nf_conn *ct;
-+	int iif;
-+	u32 cookie;
-+
-+	if (skb_dst(skb) || skb->sk)
-+		return NF_ACCEPT;
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (!ct)
-+		return NF_ACCEPT;
-+
-+	rtc = nf_ct_rtcache_find_usable(ct);
-+	if (!rtc)
-+		return NF_ACCEPT;
-+
-+	/* if iif changes, don't use cache and let ip stack
-+	 * do route lookup.
-+	 *
-+	 * If rp_filter is enabled it might toss skb, so
-+	 * we don't want to avoid these checks.
-+	 */
-+	dir = CTINFO2DIR(ctinfo);
-+	iif = nf_conn_rtcache_iif_get(rtc, dir);
-+	if (state->in->ifindex != iif) {
-+		pr_debug("ct %p, iif %d, cached iif %d, skip cached entry\n",
-+			 ct, iif, state->in->ifindex);
-+		return NF_ACCEPT;
-+	}
-+	dst = nf_conn_rtcache_dst_get(rtc, dir);
-+	if (dst == NULL)
-+		return NF_ACCEPT;
-+
-+	cookie = nf_rtcache_get_cookie(pf, dst);
-+
-+	dst = dst_check(dst, cookie);
-+	pr_debug("obtained dst %p for skb %p, cookie %d\n", dst, skb, cookie);
-+	if (likely(dst))
-+		skb_dst_set_noref(skb, dst);
-+	else
-+		nf_conn_rtcache_dst_obsolete(rtc, dir);
-+
-+	return NF_ACCEPT;
-+}
-+
-+static unsigned int nf_rtcache_forward(u_int8_t pf,
-+				       struct sk_buff *skb,
-+				       const struct nf_hook_state *state)
-+{
-+	struct nf_conn_rtcache *rtc;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	struct nf_conn *ct;
-+	struct dst_entry *dst = skb_dst(skb);
-+	int iif;
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (!ct)
-+		return NF_ACCEPT;
-+
-+	if (dst && dst_xfrm(dst))
-+		return NF_ACCEPT;
-+
-+	if (!nf_ct_is_confirmed(ct)) {
-+		if (WARN_ON(nf_ct_rtcache_find(ct)))
-+			return NF_ACCEPT;
-+		nf_ct_rtcache_ext_add(ct);
-+		return NF_ACCEPT;
-+	}
-+
-+	rtc = nf_ct_rtcache_find_usable(ct);
-+	if (!rtc)
-+		return NF_ACCEPT;
-+
-+	dir = CTINFO2DIR(ctinfo);
-+	iif = nf_conn_rtcache_iif_get(rtc, dir);
-+	pr_debug("ct %p, skb %p, dir %d, iif %d, cached iif %d\n",
-+		 ct, skb, dir, iif, state->in->ifindex);
-+	if (likely(state->in->ifindex == iif))
-+		return NF_ACCEPT;
-+
-+	nf_conn_rtcache_dst_set(pf, rtc, skb_dst(skb), dir, state->in->ifindex);
-+	return NF_ACCEPT;
-+}
-+
-+static unsigned int nf_rtcache_in4(void *priv,
-+				  struct sk_buff *skb,
-+				  const struct nf_hook_state *state)
-+{
-+	return nf_rtcache_in(NFPROTO_IPV4, skb, state);
-+}
-+
-+static unsigned int nf_rtcache_forward4(void *priv,
-+				       struct sk_buff *skb,
-+				       const struct nf_hook_state *state)
-+{
-+	return nf_rtcache_forward(NFPROTO_IPV4, skb, state);
-+}
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+static unsigned int nf_rtcache_in6(void *priv,
-+				  struct sk_buff *skb,
-+				  const struct nf_hook_state *state)
-+{
-+	return nf_rtcache_in(NFPROTO_IPV6, skb, state);
-+}
-+
-+static unsigned int nf_rtcache_forward6(void *priv,
-+				       struct sk_buff *skb,
-+				       const struct nf_hook_state *state)
-+{
-+ 	return nf_rtcache_forward(NFPROTO_IPV6, skb, state);
-+}
-+#endif
-+
-+static int nf_rtcache_dst_remove(struct nf_conn *ct, void *data)
-+{
-+	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+	struct net_device *dev = data;
-+
-+	if (!rtc)
-+		return 0;
-+
-+	if (dev->ifindex == rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif ||
-+	    dev->ifindex == rtc->cached_dst[IP_CT_DIR_REPLY].iif) {
-+		nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_ORIGINAL);
-+		nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_REPLY);
-+	}
-+
-+	return 0;
-+}
-+
-+static int nf_rtcache_netdev_event(struct notifier_block *this,
-+				   unsigned long event, void *ptr)
-+{
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+	struct net *net = dev_net(dev);
-+
-+	if (event == NETDEV_DOWN)
-+		nf_ct_iterate_cleanup_net(net, nf_rtcache_dst_remove, dev, 0, 0);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nf_rtcache_notifier = {
-+	.notifier_call = nf_rtcache_netdev_event,
-+};
-+
-+static struct nf_hook_ops rtcache_ops[] = {
-+	{
-+		.hook		= nf_rtcache_in4,
-+		.pf		= NFPROTO_IPV4,
-+		.hooknum	= NF_INET_PRE_ROUTING,
-+		.priority       = NF_IP_PRI_LAST,
-+	},
-+	{
-+		.hook           = nf_rtcache_forward4,
-+		.pf             = NFPROTO_IPV4,
-+		.hooknum        = NF_INET_FORWARD,
-+		.priority       = NF_IP_PRI_LAST,
-+	},
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+	{
-+		.hook		= nf_rtcache_in6,
-+		.pf		= NFPROTO_IPV6,
-+		.hooknum	= NF_INET_PRE_ROUTING,
-+		.priority       = NF_IP_PRI_LAST,
-+	},
-+	{
-+		.hook           = nf_rtcache_forward6,
-+		.pf             = NFPROTO_IPV6,
-+		.hooknum        = NF_INET_FORWARD,
-+		.priority       = NF_IP_PRI_LAST,
-+	},
-+#endif
-+};
-+
-+static struct nf_ct_ext_type rtcache_extend __read_mostly = {
-+	.len	= sizeof(struct nf_conn_rtcache),
-+	.align	= __alignof__(struct nf_conn_rtcache),
-+	.id	= NF_CT_EXT_RTCACHE,
-+	.destroy = nf_conn_rtcache_destroy,
-+};
-+
-+static void __net_exit rtcache_net_exit(struct net *net)
-+{
-+	/* remove hooks so no new connections get rtcache extension */
-+	nf_unregister_net_hooks(net, rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+}
-+
-+static struct pernet_operations rtcache_ops_net_ops = {
-+	.exit	= rtcache_net_exit,
-+};
-+
-+static int __init nf_conntrack_rtcache_init(void)
-+{
-+	int ret = nf_ct_extend_register(&rtcache_extend);
-+
-+	if (ret < 0) {
-+		pr_err("nf_conntrack_rtcache: Unable to register extension\n");
-+		return ret;
-+	}
-+
-+	ret = register_pernet_subsys(&rtcache_ops_net_ops);
-+	if (ret) {
-+		nf_ct_extend_unregister(&rtcache_extend);
-+		return ret;
-+	}
-+
-+	ret = nf_register_net_hooks(&init_net, rtcache_ops,
-+				    ARRAY_SIZE(rtcache_ops));
-+	if (ret < 0) {
-+		nf_ct_extend_unregister(&rtcache_extend);
-+		unregister_pernet_subsys(&rtcache_ops_net_ops);
-+		return ret;
-+	}
-+
-+	ret = register_netdevice_notifier(&nf_rtcache_notifier);
-+	if (ret) {
-+		nf_unregister_net_hooks(&init_net, rtcache_ops,
-+					ARRAY_SIZE(rtcache_ops));
-+		nf_ct_extend_unregister(&rtcache_extend);
-+		unregister_pernet_subsys(&rtcache_ops_net_ops);
-+	}
-+
-+	return ret;
-+}
-+
-+static int nf_rtcache_ext_remove(struct nf_conn *ct, void *data)
-+{
-+	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+
-+	return rtc != NULL;
-+}
-+
-+static bool __exit nf_conntrack_rtcache_wait_for_dying(struct net *net)
-+{
-+	bool wait = false;
-+	int cpu;
-+
-+	for_each_possible_cpu(cpu) {
-+		struct nf_conntrack_tuple_hash *h;
-+		struct hlist_nulls_node *n;
-+		struct nf_conn *ct;
-+		struct ct_pcpu *pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu);
-+
-+		rcu_read_lock();
-+		spin_lock_bh(&pcpu->lock);
-+
-+		hlist_nulls_for_each_entry(h, n, &pcpu->dying, hnnode) {
-+			ct = nf_ct_tuplehash_to_ctrack(h);
-+			if (nf_ct_rtcache_find(ct) != NULL) {
-+				wait = true;
-+				break;
-+			}
-+		}
-+		spin_unlock_bh(&pcpu->lock);
-+		rcu_read_unlock();
-+	}
-+
-+	return wait;
-+}
-+
-+static void __exit nf_conntrack_rtcache_fini(void)
-+{
-+	struct net *net;
-+	int count = 0;
-+
-+	synchronize_net();
-+
-+	unregister_netdevice_notifier(&nf_rtcache_notifier);
-+
-+	rtnl_lock();
-+
-+	/* zap all conntracks with rtcache extension */
-+	for_each_net(net)
-+		nf_ct_iterate_cleanup_net(net, nf_rtcache_ext_remove, NULL, 0, 0);
-+
-+	for_each_net(net) {
-+		/* .. and make sure they're gone from dying list, too */
-+		while (nf_conntrack_rtcache_wait_for_dying(net)) {
-+			msleep(200);
-+			WARN_ONCE(++count > 25, "Waiting for all rtcache conntracks to go away\n");
-+		}
-+	}
-+
-+	rtnl_unlock();
-+	synchronize_net();
-+	nf_ct_extend_unregister(&rtcache_extend);
-+}
-+module_init(nf_conntrack_rtcache_init);
-+module_exit(nf_conntrack_rtcache_fini);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Florian Westphal <fw@strlen.de>");
-+MODULE_DESCRIPTION("Conntrack route cache extension");
diff --git a/target/linux/generic/backport-4.19/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch b/target/linux/generic/backport-4.19/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
deleted file mode 100644
index d587c9ec07..0000000000
--- a/target/linux/generic/backport-4.19/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 1186af457cc186c5ed01708da71b1ffbdf0a2638 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 20 Nov 2018 09:55:45 +0100
-Subject: [PATCH] mtd: keep original flags for every struct mtd_info
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When allocating a new partition mtd subsystem runs internal tests in the
-allocate_partition(). They may result in modifying specified flags (e.g.
-dropping some /features/ like write access).
-
-Those constraints don't have to be necessary true for subpartitions. It
-may happen parent partition isn't block aligned (effectively disabling
-write access) while subpartition may fit blocks nicely. In such case all
-checks should be run again (starting with original flags value).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdcore.c   | 2 ++
- drivers/mtd/mtdpart.c   | 3 ++-
- include/linux/mtd/mtd.h | 1 +
- 3 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -665,6 +665,8 @@ static void mtd_set_dev_defaults(struct
- 	} else {
- 		pr_debug("mtd device won't show a device symlink in sysfs\n");
- 	}
-+
-+	mtd->orig_flags = mtd->flags;
- }
- 
- /**
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -346,7 +346,8 @@ static struct mtd_part *allocate_partiti
- 
- 	/* set up the MTD object for this partition */
- 	slave->mtd.type = parent->type;
--	slave->mtd.flags = parent->flags & ~part->mask_flags;
-+	slave->mtd.flags = parent->orig_flags & ~part->mask_flags;
-+	slave->mtd.orig_flags = slave->mtd.flags;
- 	slave->mtd.size = part->size;
- 	slave->mtd.writesize = parent->writesize;
- 	slave->mtd.writebufsize = parent->writebufsize;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -207,6 +207,7 @@ struct mtd_debug_info {
- struct mtd_info {
- 	u_char type;
- 	uint32_t flags;
-+	uint32_t orig_flags; /* Flags as before running mtd checks */
- 	uint64_t size;	 // Total size of the MTD
- 
- 	/* "Major" erase size for the device. Naïve users may take this
diff --git a/target/linux/generic/backport-4.19/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch b/target/linux/generic/backport-4.19/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
deleted file mode 100644
index 02296276b0..0000000000
--- a/target/linux/generic/backport-4.19/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 6750f61a13a0197c40e4a40739117493b15f19e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 20 Nov 2018 10:24:09 +0100
-Subject: [PATCH] mtd: improve calculating partition boundaries when checking
- for alignment
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When checking for alignment mtd should check absolute offsets. It's
-important for subpartitions as it doesn't make sense to check their
-relative addresses.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdpart.c | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -61,6 +61,15 @@ static inline struct mtd_part *mtd_to_pa
- 	return container_of(mtd, struct mtd_part, mtd);
- }
- 
-+static u64 part_absolute_offset(struct mtd_info *mtd)
-+{
-+	struct mtd_part *part = mtd_to_part(mtd);
-+
-+	if (!mtd_is_partition(mtd))
-+		return 0;
-+
-+	return part_absolute_offset(part->parent) + part->offset;
-+}
- 
- /*
-  * MTD methods which simply translate the effective address and pass through
-@@ -518,7 +527,7 @@ static struct mtd_part *allocate_partiti
- 	if (!(slave->mtd.flags & MTD_NO_ERASE))
- 		wr_alignment = slave->mtd.erasesize;
- 
--	tmp = slave->offset;
-+	tmp = part_absolute_offset(parent) + slave->offset;
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- 		/* Doesn't start on a boundary of major erase size */
-@@ -529,7 +538,7 @@ static struct mtd_part *allocate_partiti
- 			part->name);
- 	}
- 
--	tmp = slave->mtd.size;
-+	tmp = part_absolute_offset(parent) + slave->mtd.size;
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- 		slave->mtd.flags &= ~MTD_WRITEABLE;
diff --git a/target/linux/generic/backport-4.19/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch b/target/linux/generic/backport-4.19/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
deleted file mode 100644
index cc32aee17b..0000000000
--- a/target/linux/generic/backport-4.19/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From 5a1c18b761ddb299a06746948b9ec2814b04fa92 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 2 Jan 2019 00:00:01 +0100
-Subject: [PATCH] bcma: keep a direct pointer to the struct device
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Accessing struct device is pretty useful/common so having a direct
-pointer:
-1) Simplifies some code
-2) Makes bcma_bus_get_host_dev() unneeded
-3) Allows further improvements like using dev_* printing helpers
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/bcma/bcma_private.h |  1 -
- drivers/bcma/driver_gpio.c  |  2 +-
- drivers/bcma/host_pci.c     |  2 ++
- drivers/bcma/host_soc.c     |  4 ++--
- drivers/bcma/main.c         | 45 +++++++++----------------------------
- include/linux/bcma/bcma.h   | 11 +++------
- 6 files changed, 18 insertions(+), 47 deletions(-)
-
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -33,7 +33,6 @@ int __init bcma_bus_early_register(struc
- int bcma_bus_suspend(struct bcma_bus *bus);
- int bcma_bus_resume(struct bcma_bus *bus);
- #endif
--struct device *bcma_bus_get_host_dev(struct bcma_bus *bus);
- 
- /* scan.c */
- void bcma_detect_chip(struct bcma_bus *bus);
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -183,7 +183,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- 	chip->direction_input	= bcma_gpio_direction_input;
- 	chip->direction_output	= bcma_gpio_direction_output;
- 	chip->owner		= THIS_MODULE;
--	chip->parent		= bcma_bus_get_host_dev(bus);
-+	chip->parent		= bus->dev;
- #if IS_BUILTIN(CONFIG_OF)
- 	chip->of_node		= cc->core->dev.of_node;
- #endif
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -196,6 +196,8 @@ static int bcma_host_pci_probe(struct pc
- 		goto err_pci_release_regions;
- 	}
- 
-+	bus->dev = &dev->dev;
-+
- 	/* Map MMIO */
- 	err = -ENOMEM;
- 	bus->mmio = pci_iomap(dev, 0, ~0UL);
---- a/drivers/bcma/host_soc.c
-+++ b/drivers/bcma/host_soc.c
-@@ -179,7 +179,6 @@ int __init bcma_host_soc_register(struct
- 	/* Host specific */
- 	bus->hosttype = BCMA_HOSTTYPE_SOC;
- 	bus->ops = &bcma_host_soc_ops;
--	bus->host_pdev = NULL;
- 
- 	/* Initialize struct, detect chip */
- 	bcma_init_bus(bus);
-@@ -213,6 +212,8 @@ static int bcma_host_soc_probe(struct pl
- 	if (!bus)
- 		return -ENOMEM;
- 
-+	bus->dev = dev;
-+
- 	/* Map MMIO */
- 	bus->mmio = of_iomap(np, 0);
- 	if (!bus->mmio)
-@@ -221,7 +222,6 @@ static int bcma_host_soc_probe(struct pl
- 	/* Host specific */
- 	bus->hosttype = BCMA_HOSTTYPE_SOC;
- 	bus->ops = &bcma_host_soc_ops;
--	bus->host_pdev = pdev;
- 
- 	/* Initialize struct, detect chip */
- 	bcma_init_bus(bus);
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -223,8 +223,8 @@ unsigned int bcma_core_irq(struct bcma_d
- 			mips_irq = bcma_core_mips_irq(core);
- 			return mips_irq <= 4 ? mips_irq + 2 : 0;
- 		}
--		if (bus->host_pdev)
--			return bcma_of_get_irq(&bus->host_pdev->dev, core, num);
-+		if (bus->dev)
-+			return bcma_of_get_irq(bus->dev, core, num);
- 		return 0;
- 	case BCMA_HOSTTYPE_SDIO:
- 		return 0;
-@@ -239,18 +239,18 @@ void bcma_prepare_core(struct bcma_bus *
- 	core->dev.release = bcma_release_core_dev;
- 	core->dev.bus = &bcma_bus_type;
- 	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
--	core->dev.parent = bcma_bus_get_host_dev(bus);
--	if (core->dev.parent)
--		bcma_of_fill_device(core->dev.parent, core);
-+	core->dev.parent = bus->dev;
-+	if (bus->dev)
-+		bcma_of_fill_device(bus->dev, core);
- 
- 	switch (bus->hosttype) {
- 	case BCMA_HOSTTYPE_PCI:
--		core->dma_dev = &bus->host_pci->dev;
-+		core->dma_dev = bus->dev;
- 		core->irq = bus->host_pci->irq;
- 		break;
- 	case BCMA_HOSTTYPE_SOC:
--		if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) {
--			core->dma_dev = &bus->host_pdev->dev;
-+		if (IS_ENABLED(CONFIG_OF) && bus->dev) {
-+			core->dma_dev = bus->dev;
- 		} else {
- 			core->dev.dma_mask = &core->dev.coherent_dma_mask;
- 			core->dma_dev = &core->dev;
-@@ -261,28 +261,6 @@ void bcma_prepare_core(struct bcma_bus *
- 	}
- }
- 
--struct device *bcma_bus_get_host_dev(struct bcma_bus *bus)
--{
--	switch (bus->hosttype) {
--	case BCMA_HOSTTYPE_PCI:
--		if (bus->host_pci)
--			return &bus->host_pci->dev;
--		else
--			return NULL;
--	case BCMA_HOSTTYPE_SOC:
--		if (bus->host_pdev)
--			return &bus->host_pdev->dev;
--		else
--			return NULL;
--	case BCMA_HOSTTYPE_SDIO:
--		if (bus->host_sdio)
--			return &bus->host_sdio->dev;
--		else
--			return NULL;
--	}
--	return NULL;
--}
--
- void bcma_init_bus(struct bcma_bus *bus)
- {
- 	mutex_lock(&bcma_buses_mutex);
-@@ -402,7 +380,6 @@ int bcma_bus_register(struct bcma_bus *b
- {
- 	int err;
- 	struct bcma_device *core;
--	struct device *dev;
- 
- 	/* Scan for devices (cores) */
- 	err = bcma_bus_scan(bus);
-@@ -425,10 +402,8 @@ int bcma_bus_register(struct bcma_bus *b
- 		bcma_core_pci_early_init(&bus->drv_pci[0]);
- 	}
- 
--	dev = bcma_bus_get_host_dev(bus);
--	if (dev) {
--		of_platform_default_populate(dev->of_node, NULL, dev);
--	}
-+	if (bus->dev)
-+		of_platform_default_populate(bus->dev->of_node, NULL, bus->dev);
- 
- 	/* Cores providing flash access go before SPROM init */
- 	list_for_each_entry(core, &bus->cores, list) {
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -332,6 +332,8 @@ extern int bcma_arch_register_fallback_s
- 		struct ssb_sprom *out));
- 
- struct bcma_bus {
-+	struct device *dev;
-+
- 	/* The MMIO area. */
- 	void __iomem *mmio;
- 
-@@ -339,14 +341,7 @@ struct bcma_bus {
- 
- 	enum bcma_hosttype hosttype;
- 	bool host_is_pcie2; /* Used for BCMA_HOSTTYPE_PCI only */
--	union {
--		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
--		struct pci_dev *host_pci;
--		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
--		struct sdio_func *host_sdio;
--		/* Pointer to platform device (only for BCMA_HOSTTYPE_SOC) */
--		struct platform_device *host_pdev;
--	};
-+	struct pci_dev *host_pci; /* PCI bus pointer (BCMA_HOSTTYPE_PCI only) */
- 
- 	struct bcma_chipinfo chipinfo;
- 
diff --git a/target/linux/generic/backport-4.19/080-v5.1-0002-bcma-use-dev_-printing-functions.patch b/target/linux/generic/backport-4.19/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
deleted file mode 100644
index 7ce8ba8967..0000000000
--- a/target/linux/generic/backport-4.19/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 777bc4801a6868fcbff09ffb6e30f023e7c5ed38 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 2 Jan 2019 00:00:02 +0100
-Subject: [PATCH] bcma: use dev_* printing functions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It provides more meaningful messages.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/bcma/bcma_private.h | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -10,13 +10,13 @@
- #include <linux/delay.h>
- 
- #define bcma_err(bus, fmt, ...) \
--	pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-+	dev_err((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
- #define bcma_warn(bus, fmt, ...) \
--	pr_warn("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-+	dev_warn((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
- #define bcma_info(bus, fmt, ...) \
--	pr_info("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-+	dev_info((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
- #define bcma_debug(bus, fmt, ...) \
--	pr_debug("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-+	dev_dbg((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
- 
- struct bcma_bus;
- 
diff --git a/target/linux/generic/backport-4.19/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch b/target/linux/generic/backport-4.19/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
deleted file mode 100644
index 5d49a406c4..0000000000
--- a/target/linux/generic/backport-4.19/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 46bf067870156abd61fe24d14c2486d15b8b502c Mon Sep 17 00:00:00 2001
-From: Dave Taht <dave@taht.net>
-Date: Fri, 14 Dec 2018 18:38:40 +0000
-Subject: [PATCH 1/1] Allow class-e address assignment in ifconfig and early
- boot
-
-While the linux kernel became mostly "class-e clean" a decade ago,
-and most distributions long ago switched to the iproute2 suite
-of utilities, which allow class-e (240.0.0.0/4) address assignment,
-distributions relying on busybox, toybox and other forms of
-ifconfig cannot assign class-e addresses without this kernel patch.
-
-With this patch, also, a boot command line on these addresses is feasible:
-(ip=248.0.1.2::248.0.1.1:255.255.255.0).
-
-While CIDR has been obsolete for 2 decades, and a survey of all the
-userspace open source code in the world shows most IN_whatever macros
-are also obsolete... rather than obsolete CIDR from this ioctl entirely,
-this patch merely enables class-e assignment, sanely.
-
-H/T to Vince Fuller and his original patch here:
-    https://lkml.org/lkml/2008/1/7/370
-
-Signed-off-by: Dave Taht <dave.taht@gmail.com>
-Reviewed-by: John Gilmore <gnu@toad.com>
----
- include/uapi/linux/in.h | 8 ++++++--
- net/ipv4/devinet.c      | 4 +++-
- net/ipv4/ipconfig.c     | 2 ++
- 3 files changed, 11 insertions(+), 3 deletions(-)
-
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -268,8 +268,12 @@ struct sockaddr_in {
- #define	IN_MULTICAST(a)		IN_CLASSD(a)
- #define IN_MULTICAST_NET	0xF0000000
- 
--#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
--#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
-+#define	IN_BADCLASS(a)		(((long int) (a) ) == (long int)0xffffffff)
-+#define	IN_EXPERIMENTAL(a)	IN_BADCLASS((a))
-+
-+#define	IN_CLASSE(a)		((((long int) (a)) & 0xf0000000) == 0xf0000000)
-+#define	IN_CLASSE_NET		0xffffffff
-+#define	IN_CLASSE_NSHIFT	0
- 
- /* Address to accept any incoming messages. */
- #define	INADDR_ANY		((unsigned long int) 0x00000000)
---- a/net/ipv4/devinet.c
-+++ b/net/ipv4/devinet.c
-@@ -941,7 +941,7 @@ static int inet_abc_len(__be32 addr)
- {
- 	int rc = -1;	/* Something else, probably a multicast. */
- 
--	if (ipv4_is_zeronet(addr))
-+	if (ipv4_is_zeronet(addr) || ipv4_is_lbcast(addr))
- 		rc = 0;
- 	else {
- 		__u32 haddr = ntohl(addr);
-@@ -952,6 +952,8 @@ static int inet_abc_len(__be32 addr)
- 			rc = 16;
- 		else if (IN_CLASSC(haddr))
- 			rc = 24;
-+		else if (IN_CLASSE(haddr))
-+			rc = 32;
- 	}
- 
- 	return rc;
---- a/net/ipv4/ipconfig.c
-+++ b/net/ipv4/ipconfig.c
-@@ -429,6 +429,8 @@ static int __init ic_defaults(void)
- 			ic_netmask = htonl(IN_CLASSB_NET);
- 		else if (IN_CLASSC(ntohl(ic_myaddr)))
- 			ic_netmask = htonl(IN_CLASSC_NET);
-+		else if (IN_CLASSE(ntohl(ic_myaddr)))
-+			ic_netmask = htonl(IN_CLASSE_NET);
- 		else {
- 			pr_err("IP-Config: Unable to guess netmask for address %pI4\n",
- 			       &ic_myaddr);
diff --git a/target/linux/generic/backport-4.19/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch b/target/linux/generic/backport-4.19/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
deleted file mode 100644
index 2b3384391a..0000000000
--- a/target/linux/generic/backport-4.19/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 4cc30de79d293f1e8c5f50ae3a9c005def9564a0 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Mon, 7 Jan 2019 14:14:27 +0100
-Subject: [PATCH 2/2] arm: cns3xxx: use actual size reads for PCIe
-
-commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
-reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(),
-which preserved the property of only doing 32-bit reads.
-
-It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
-so it changed writes from always being 32 bits to being the actual size,
-which works just fine.
-
-Due to:
-- The documentation does not mention that only 32 bit access is allowed.
-- Writes are already executed using the actual size
-- Extensive testing shows that 8b, 16b and 32b reads work as intended
-
-It makes perfectly sense to also swap 32 bit reading in favor of actual size.
-
-Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
-Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
-CC: Arnd Bergmann <arnd@arndb.de>
-CC: Krzysztof Halasa <khalasa@piap.pl>
-CC: Olof Johansson <olof@lixom.net>
-CC: Robin Leblon <robin.leblon@ncentric.com>
-CC: Rob Herring <robh@kernel.org>
-CC: Russell King <linux@armlinux.org.uk>
-CC: Tim Harvey <tharvey@gateworks.com>
-CC: stable@vger.kernel.org # v4.0+
----
- arch/arm/mach-cns3xxx/pcie.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -93,7 +93,7 @@ static int cns3xxx_pci_read_config(struc
- 	u32 mask = (0x1ull << (size * 8)) - 1;
- 	int shift = (where % 4) * 8;
- 
--	ret = pci_generic_config_read32(bus, devfn, where, size, val);
-+	ret = pci_generic_config_read(bus, devfn, where, size, val);
- 
- 	if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
- 	    (where & 0xffc) == PCI_CLASS_REVISION)
diff --git a/target/linux/generic/backport-4.19/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch b/target/linux/generic/backport-4.19/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
deleted file mode 100644
index f8ccfcc95d..0000000000
--- a/target/linux/generic/backport-4.19/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Thu, 25 Jan 2018 12:58:55 +0100
-Subject: [PATCH] netfilter: nft_flow_offload: handle netdevice events from
- nf_flow_table
-
-Move the code that deals with device events to the core.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -520,5 +520,35 @@ void nf_flow_table_free(struct nf_flowta
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_free);
- 
-+static int nf_flow_table_netdev_event(struct notifier_block *this,
-+				      unsigned long event, void *ptr)
-+{
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+	if (event != NETDEV_DOWN)
-+		return NOTIFY_DONE;
-+
-+	nf_flow_table_cleanup(dev_net(dev), dev);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+	.notifier_call	= nf_flow_table_netdev_event,
-+};
-+
-+static int __init nf_flow_table_module_init(void)
-+{
-+	return register_netdevice_notifier(&flow_offload_netdev_notifier);
-+}
-+
-+static void __exit nf_flow_table_module_exit(void)
-+{
-+	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
-+}
-+
-+module_init(nf_flow_table_module_init);
-+module_exit(nf_flow_table_module_exit);
-+
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -196,47 +196,14 @@ static struct nft_expr_type nft_flow_off
- 	.owner		= THIS_MODULE,
- };
- 
--static int flow_offload_netdev_event(struct notifier_block *this,
--				     unsigned long event, void *ptr)
--{
--	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
--
--	if (event != NETDEV_DOWN)
--		return NOTIFY_DONE;
--
--	nf_flow_table_cleanup(dev_net(dev), dev);
--
--	return NOTIFY_DONE;
--}
--
--static struct notifier_block flow_offload_netdev_notifier = {
--	.notifier_call	= flow_offload_netdev_event,
--};
--
- static int __init nft_flow_offload_module_init(void)
- {
--	int err;
--
--	err = register_netdevice_notifier(&flow_offload_netdev_notifier);
--	if (err)
--		goto err;
--
--	err = nft_register_expr(&nft_flow_offload_type);
--	if (err < 0)
--		goto register_expr;
--
--	return 0;
--
--register_expr:
--	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
--err:
--	return err;
-+	return nft_register_expr(&nft_flow_offload_type);
- }
- 
- static void __exit nft_flow_offload_module_exit(void)
- {
- 	nft_unregister_expr(&nft_flow_offload_type);
--	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
- }
- 
- module_init(nft_flow_offload_module_init);
diff --git a/target/linux/generic/backport-4.19/366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch b/target/linux/generic/backport-4.19/366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch
deleted file mode 100644
index ac7a73b60e..0000000000
--- a/target/linux/generic/backport-4.19/366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 18:21:43 +0100
-Subject: [PATCH] netfilter: nf_flow_table: clean up and fix dst handling
-
-dst handling in the code is inconsistent and possibly wrong. In my test,
-skb_dst(skb) holds the dst entry after routing but before NAT, so the
-code could possibly return the same dst entry for both directions of a
-connection.
-Additionally, there was some confusion over the dst entry vs the address
-passed as parameter to rt_nexthop/rt6_nexthop.
-
-Do an explicit dst lookup for both ends of the connection and always use
-the source address for it. When running the IP hook, use the dst entry
-for the opposite direction for determining the route.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -241,7 +241,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- 
- 	dir = tuplehash->tuple.dir;
- 	flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]);
--	rt = (struct rtable *)flow->tuplehash[dir].tuple.dst_cache;
-+	rt = (struct rtable *)flow->tuplehash[!dir].tuple.dst_cache;
- 
- 	if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu)) &&
- 	    (ip_hdr(skb)->frag_off & htons(IP_DF)) != 0)
-@@ -459,7 +459,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 
- 	dir = tuplehash->tuple.dir;
- 	flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]);
--	rt = (struct rt6_info *)flow->tuplehash[dir].tuple.dst_cache;
-+	rt = (struct rt6_info *)flow->tuplehash[!dir].tuple.dst_cache;
- 
- 	if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu)))
- 		return NF_ACCEPT;
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -18,13 +18,11 @@ struct nft_flow_offload {
- 	struct nft_flowtable	*flowtable;
- };
- 
--static int nft_flow_route(const struct nft_pktinfo *pkt,
--			  const struct nf_conn *ct,
--			  struct nf_flow_route *route,
--			  enum ip_conntrack_dir dir)
-+static struct dst_entry *
-+nft_flow_dst(const struct nf_conn *ct, enum ip_conntrack_dir dir,
-+	     const struct nft_pktinfo *pkt)
- {
--	struct dst_entry *this_dst = skb_dst(pkt->skb);
--	struct dst_entry *other_dst = NULL;
-+	struct dst_entry *dst;
- 	struct flowi fl;
- 
- 	memset(&fl, 0, sizeof(fl));
-@@ -39,8 +37,21 @@ static int nft_flow_route(const struct n
- 		break;
- 	}
- 
--	nf_route(nft_net(pkt), &other_dst, &fl, false, nft_pf(pkt));
--	if (!other_dst)
-+	nf_route(nft_net(pkt), &dst, &fl, false, nft_pf(pkt));
-+
-+	return dst;
-+}
-+
-+static int nft_flow_route(const struct nft_pktinfo *pkt,
-+			  const struct nf_conn *ct,
-+			  struct nf_flow_route *route,
-+			  enum ip_conntrack_dir dir)
-+{
-+	struct dst_entry *this_dst, *other_dst;
-+
-+	this_dst = nft_flow_dst(ct, dir, pkt);
-+	other_dst = nft_flow_dst(ct, !dir, pkt);
-+	if (!this_dst || !other_dst)
- 		return -ENOENT;
- 
- 	route->tuple[dir].dst		= this_dst;
diff --git a/target/linux/generic/backport-4.19/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch b/target/linux/generic/backport-4.19/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch
deleted file mode 100644
index cc8e00353d..0000000000
--- a/target/linux/generic/backport-4.19/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 13 Jun 2018 12:33:39 +0200
-Subject: [PATCH] netfilter: nf_flow_table: fix offloaded connection timeout
- corner case
-
-The full teardown of offloaded flows is deferred to a gc work item,
-however processing of packets by netfilter needs to happen immediately
-after a teardown is requested, because the conntrack state needs to be
-fixed up.
-
-Since the IPS_OFFLOAD_BIT is still kept until the teardown is complete,
-the netfilter conntrack gc can accidentally bump the timeout of a
-connection where offload was just stopped, causing a conntrack entry
-leak.
-
-Fix this by moving the conntrack timeout bumping from conntrack core to
-the nf_flow_offload and add a check to prevent bogus timeout bumps.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -1178,18 +1178,6 @@ static bool gc_worker_can_early_drop(con
- 	return false;
- }
- 
--#define	DAY	(86400 * HZ)
--
--/* Set an arbitrary timeout large enough not to ever expire, this save
-- * us a check for the IPS_OFFLOAD_BIT from the packet path via
-- * nf_ct_is_expired().
-- */
--static void nf_ct_offload_timeout(struct nf_conn *ct)
--{
--	if (nf_ct_expires(ct) < DAY / 2)
--		ct->timeout = nfct_time_stamp + DAY;
--}
--
- static void gc_worker(struct work_struct *work)
- {
- 	unsigned int min_interval = max(HZ / GC_MAX_BUCKETS_DIV, 1u);
-@@ -1226,10 +1214,8 @@ static void gc_worker(struct work_struct
- 			tmp = nf_ct_tuplehash_to_ctrack(h);
- 
- 			scanned++;
--			if (test_bit(IPS_OFFLOAD_BIT, &tmp->status)) {
--				nf_ct_offload_timeout(tmp);
-+			if (test_bit(IPS_OFFLOAD_BIT, &tmp->status))
- 				continue;
--			}
- 
- 			if (nf_ct_is_expired(tmp)) {
- 				nf_ct_gc_expired(tmp);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -183,8 +183,27 @@ static const struct rhashtable_params nf
- 	.automatic_shrinking	= true,
- };
- 
-+#define	DAY	(86400 * HZ)
-+
-+/* Set an arbitrary timeout large enough not to ever expire, this save
-+ * us a check for the IPS_OFFLOAD_BIT from the packet path via
-+ * nf_ct_is_expired().
-+ */
-+static void nf_ct_offload_timeout(struct flow_offload *flow)
-+{
-+	struct flow_offload_entry *entry;
-+	struct nf_conn *ct;
-+
-+	entry = container_of(flow, struct flow_offload_entry, flow);
-+	ct = entry->ct;
-+
-+	if (nf_ct_expires(ct) < DAY / 2)
-+		ct->timeout = nfct_time_stamp + DAY;
-+}
-+
- int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
- {
-+	nf_ct_offload_timeout(flow);
- 	flow->timeout = (u32)jiffies;
- 
- 	rhashtable_insert_fast(&flow_table->rhashtable,
-@@ -305,6 +324,8 @@ static int nf_flow_offload_gc_step(struc
- 	rhashtable_walk_start(&hti);
- 
- 	while ((tuplehash = rhashtable_walk_next(&hti))) {
-+		bool teardown;
-+
- 		if (IS_ERR(tuplehash)) {
- 			err = PTR_ERR(tuplehash);
- 			if (err != -EAGAIN)
-@@ -317,9 +338,13 @@ static int nf_flow_offload_gc_step(struc
- 
- 		flow = container_of(tuplehash, struct flow_offload, tuplehash[0]);
- 
--		if (nf_flow_has_expired(flow) ||
--		    (flow->flags & (FLOW_OFFLOAD_DYING |
--				    FLOW_OFFLOAD_TEARDOWN)))
-+		teardown = flow->flags & (FLOW_OFFLOAD_DYING |
-+					  FLOW_OFFLOAD_TEARDOWN);
-+
-+		if (!teardown)
-+			nf_ct_offload_timeout(flow);
-+
-+		if (nf_flow_has_expired(flow) || teardown)
- 			flow_offload_del(flow_table, flow);
- 	}
- out:
diff --git a/target/linux/generic/backport-4.19/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch b/target/linux/generic/backport-4.19/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch
deleted file mode 100644
index 5ee55b8f08..0000000000
--- a/target/linux/generic/backport-4.19/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 14 Jun 2018 11:20:09 +0200
-Subject: [PATCH] netfilter: nf_flow_table: fix up ct state of flows after
- timeout
-
-If a connection simply times out instead of being torn down, it is left
-active with a long timeout. Fix this by calling flow_offload_fixup_ct_state
-here as well.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -231,6 +231,9 @@ static void flow_offload_del(struct nf_f
- 	e = container_of(flow, struct flow_offload_entry, flow);
- 	clear_bit(IPS_OFFLOAD_BIT, &e->ct->status);
- 
-+	if (!(flow->flags & FLOW_OFFLOAD_TEARDOWN))
-+		flow_offload_fixup_ct_state(e->ct);
-+
- 	flow_offload_free(flow);
- }
- 
diff --git a/target/linux/generic/backport-4.19/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch b/target/linux/generic/backport-4.19/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
deleted file mode 100644
index 632f41ef98..0000000000
--- a/target/linux/generic/backport-4.19/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
+++ /dev/null
@@ -1,617 +0,0 @@
-From 402c8d61d2f27060be14849fcb30682f75f3bf3b Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Wed, 13 Mar 2019 20:54:49 +0000
-Subject: [PATCH] net: sched: Introduce act_ctinfo action
-
-ctinfo is a new tc filter action module.  It is designed to restore DSCPs
-stored in conntrack marks into the ipv4/v6 diffserv field.
-
-The feature is intended for use and has been found useful for restoring
-ingress classifications based on egress classifications across links
-that bleach or otherwise change DSCP, typically home ISP Internet links.
-Restoring DSCP on ingress on the WAN link allows qdiscs such as CAKE to
-shape inbound packets according to policies that are easier to indicate
-on egress.
-
-Ingress classification is traditionally a challenging task since
-iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
-lookups, hence are unable to see internal IPv4 addresses as used on the
-typical home masquerading gateway.
-
-ctinfo understands the following parameters:
-
-dscp dscpmask[/statemask]
-
-dscpmask - a 32 bit mask of at least 6 contiguous bits and indicates
-where ctinfo will find the DSCP bits stored in the conntrack mark.
-
-statemask - a 32 bit mask of (usually) 1 bit length, outside the area
-specified by dscpmask.  This represents a conditional operation flag
-whereby the DSCP is only restored if the flag is set.  This is useful to
-implement a 'one shot' iptables based classification where the
-'complicated' iptables rules are only run once to classify the
-connection on initial (egress) packet and subsequent packets are all
-marked/restored with the same DSCP.  A mask of zero disables the
-conditional behaviour ie. the conntrack mark DSCP bits are always
-restored to the ip diffserv field (assuming the conntrack entry is found
-& the skb is an ipv4/ipv6 type)
-
-optional parameters:
-
-zone - conntrack zone
-
-control - action related control (reclassify | pipe | drop | continue |
-ok | goto chain <CHAIN_INDEX>)
-
-e.g. dscp 0xfc000000/0x01000000
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP       | unused | flag  |unused   |
-|-----------------------0x01---000000---|
-      |                   |
-      |                   |
-      ---|             Conditional flag
-         v             only restore if set
-|-ip diffserv-|
-| 6 bits      |
-|-------------|
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- include/net/tc_act/tc_ctinfo.h            |  28 ++
- include/uapi/linux/pkt_cls.h              |   3 +-
- include/uapi/linux/tc_act/tc_ctinfo.h     |  34 ++
- net/sched/Kconfig                         |  17 +
- net/sched/Makefile                        |   1 +
- net/sched/act_ctinfo.c                    | 395 ++++++++++++++++++++++
- tools/testing/selftests/tc-testing/config |   1 +
- 7 files changed, 478 insertions(+), 1 deletion(-)
- create mode 100644 include/net/tc_act/tc_ctinfo.h
- create mode 100644 include/uapi/linux/tc_act/tc_ctinfo.h
- create mode 100644 net/sched/act_ctinfo.c
-
-diff --git a/include/net/tc_act/tc_ctinfo.h b/include/net/tc_act/tc_ctinfo.h
-new file mode 100644
-index 000000000000..d6a688571672
---- /dev/null
-+++ b/include/net/tc_act/tc_ctinfo.h
-@@ -0,0 +1,28 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __NET_TC_CTINFO_H
-+#define __NET_TC_CTINFO_H
-+
-+#include <net/act_api.h>
-+
-+struct tcf_ctinfo_params {
-+	struct rcu_head rcu;
-+	struct net *net;
-+	u32 dscpmask;
-+	u32 dscpstatemask;
-+	u32 cpmarkmask;
-+	u16 zone;
-+	u8 mode;
-+	u8 dscpmaskshift;
-+};
-+
-+struct tcf_ctinfo {
-+	struct tc_action common;
-+	struct tcf_ctinfo_params __rcu *params;
-+	u64 stats_dscp_set;
-+	u64 stats_dscp_error;
-+	u64 stats_cpmark_set;
-+};
-+
-+#define to_ctinfo(a) ((struct tcf_ctinfo *)a)
-+
-+#endif /* __NET_TC_CTINFO_H */
-diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
-index be382fb0592d..71e10c5a96a0 100644
---- a/include/uapi/linux/pkt_cls.h
-+++ b/include/uapi/linux/pkt_cls.h
-@@ -68,7 +68,8 @@ enum {
- 	TCA_ID_UNSPEC=0,
- 	TCA_ID_POLICE=1,
- 	/* other actions go here */
--	__TCA_ID_MAX=255
-+	TCA_ID_CTINFO,
-+	__TCA_ID_MAX = 255
- };
- 
- #define TCA_ID_MAX __TCA_ID_MAX
-diff --git a/include/uapi/linux/tc_act/tc_ctinfo.h b/include/uapi/linux/tc_act/tc_ctinfo.h
-new file mode 100644
-index 000000000000..da803e05a89b
---- /dev/null
-+++ b/include/uapi/linux/tc_act/tc_ctinfo.h
-@@ -0,0 +1,34 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+#ifndef __UAPI_TC_CTINFO_H
-+#define __UAPI_TC_CTINFO_H
-+
-+#include <linux/types.h>
-+#include <linux/pkt_cls.h>
-+
-+struct tc_ctinfo {
-+	tc_gen;
-+};
-+
-+enum {
-+	TCA_CTINFO_UNSPEC,
-+	TCA_CTINFO_PAD,
-+	TCA_CTINFO_TM,
-+	TCA_CTINFO_ACT,
-+	TCA_CTINFO_ZONE,
-+	TCA_CTINFO_PARMS_DSCP_MASK,
-+	TCA_CTINFO_PARMS_DSCP_STATEMASK,
-+	TCA_CTINFO_PARMS_CPMARK_MASK,
-+	TCA_CTINFO_STATS_DSCP_SET,
-+	TCA_CTINFO_STATS_DSCP_ERROR,
-+	TCA_CTINFO_STATS_CPMARK_SET,
-+	__TCA_CTINFO_MAX
-+};
-+
-+#define TCA_CTINFO_MAX (__TCA_CTINFO_MAX - 1)
-+
-+enum {
-+	CTINFO_MODE_DSCP	= BIT(0),
-+	CTINFO_MODE_CPMARK	= BIT(1)
-+};
-+
-+#endif
-diff --git a/net/sched/Kconfig b/net/sched/Kconfig
-index e95741388311..1d79d5dba6e4 100644
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -866,6 +866,23 @@ config NET_ACT_CONNMARK
- 	  To compile this code as a module, choose M here: the
- 	  module will be called act_connmark.
- 
-+config NET_ACT_CTINFO
-+        tristate "Netfilter Connection Mark Actions"
-+        depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
-+        depends on NF_CONNTRACK && NF_CONNTRACK_MARK
-+        help
-+	  Say Y here to allow transfer of a connmark stored information.
-+	  Current actions transfer connmark stored DSCP into
-+	  ipv4/v6 diffserv and/or to transfer connmark to packet
-+	  mark.  Both are useful for restoring egress based marks
-+	  back onto ingress connections for qdisc priority mapping
-+	  purposes.
-+
-+	  If unsure, say N.
-+
-+	  To compile this code as a module, choose M here: the
-+	  module will be called act_ctinfo.
-+
- config NET_ACT_SKBMOD
-         tristate "skb data modification action"
-         depends on NET_CLS_ACT
-diff --git a/net/sched/Makefile b/net/sched/Makefile
-index f0403f49edcb..bb3c2bc44af7 100644
---- a/net/sched/Makefile
-+++ b/net/sched/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_NET_ACT_CSUM)	+= act_csum.o
- obj-$(CONFIG_NET_ACT_VLAN)	+= act_vlan.o
- obj-$(CONFIG_NET_ACT_BPF)	+= act_bpf.o
- obj-$(CONFIG_NET_ACT_CONNMARK)	+= act_connmark.o
-+obj-$(CONFIG_NET_ACT_CTINFO)	+= act_ctinfo.o
- obj-$(CONFIG_NET_ACT_SKBMOD)	+= act_skbmod.o
- obj-$(CONFIG_NET_ACT_IFE)	+= act_ife.o
- obj-$(CONFIG_NET_IFE_SKBMARK)	+= act_meta_mark.o
-diff --git a/net/sched/act_ctinfo.c b/net/sched/act_ctinfo.c
-new file mode 100644
-index 000000000000..8975cb4976aa
---- /dev/null
-+++ b/net/sched/act_ctinfo.c
-@@ -0,0 +1,395 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/* net/sched/act_ctinfo.c  netfilter ctinfo connmark actions
-+ *
-+ * Copyright (c) 2019 Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/skbuff.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/pkt_cls.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+#include <net/netlink.h>
-+#include <net/pkt_sched.h>
-+#include <net/act_api.h>
-+#include <net/pkt_cls.h>
-+#include <uapi/linux/tc_act/tc_ctinfo.h>
-+#include <net/tc_act/tc_ctinfo.h>
-+
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_ecache.h>
-+#include <net/netfilter/nf_conntrack_zones.h>
-+
-+static struct tc_action_ops act_ctinfo_ops;
-+static unsigned int ctinfo_net_id;
-+
-+static void tcf_ctinfo_dscp_set(struct nf_conn *ct, struct tcf_ctinfo *ca,
-+				struct tcf_ctinfo_params *cp,
-+				struct sk_buff *skb, int wlen, int proto)
-+{
-+	u8 dscp, newdscp;
-+
-+	newdscp = (((ct->mark & cp->dscpmask) >> cp->dscpmaskshift) << 2) &
-+		     ~INET_ECN_MASK;
-+
-+	switch (proto) {
-+	case NFPROTO_IPV4:
-+		dscp = ipv4_get_dsfield(ip_hdr(skb)) & ~INET_ECN_MASK;
-+		if (dscp != newdscp) {
-+			if (likely(!skb_try_make_writable(skb, wlen))) {
-+				ipv4_change_dsfield(ip_hdr(skb),
-+						    INET_ECN_MASK,
-+						    newdscp);
-+				ca->stats_dscp_set++;
-+			} else {
-+				ca->stats_dscp_error++;
-+			}
-+		}
-+		break;
-+	case NFPROTO_IPV6:
-+		dscp = ipv6_get_dsfield(ipv6_hdr(skb)) & ~INET_ECN_MASK;
-+		if (dscp != newdscp) {
-+			if (likely(!skb_try_make_writable(skb, wlen))) {
-+				ipv6_change_dsfield(ipv6_hdr(skb),
-+						    INET_ECN_MASK,
-+						    newdscp);
-+				ca->stats_dscp_set++;
-+			} else {
-+				ca->stats_dscp_error++;
-+			}
-+		}
-+		break;
-+	default:
-+		break;
-+	}
-+}
-+
-+static void tcf_ctinfo_cpmark_set(struct nf_conn *ct, struct tcf_ctinfo *ca,
-+				  struct tcf_ctinfo_params *cp,
-+				  struct sk_buff *skb)
-+{
-+	ca->stats_cpmark_set++;
-+	skb->mark = ct->mark & cp->cpmarkmask;
-+}
-+
-+static int tcf_ctinfo_act(struct sk_buff *skb, const struct tc_action *a,
-+			  struct tcf_result *res)
-+{
-+	const struct nf_conntrack_tuple_hash *thash = NULL;
-+	struct tcf_ctinfo *ca = to_ctinfo(a);
-+	struct nf_conntrack_tuple tuple;
-+	struct nf_conntrack_zone zone;
-+	enum ip_conntrack_info ctinfo;
-+	struct tcf_ctinfo_params *cp;
-+	struct nf_conn *ct;
-+	int proto, wlen;
-+	int action;
-+
-+	cp = rcu_dereference_bh(ca->params);
-+
-+	tcf_lastuse_update(&ca->tcf_tm);
-+	bstats_update(&ca->tcf_bstats, skb);
-+	action = READ_ONCE(ca->tcf_action);
-+
-+	wlen = skb_network_offset(skb);
-+	if (tc_skb_protocol(skb) == htons(ETH_P_IP)) {
-+		wlen += sizeof(struct iphdr);
-+		if (!pskb_may_pull(skb, wlen))
-+			goto out;
-+
-+		proto = NFPROTO_IPV4;
-+	} else if (tc_skb_protocol(skb) == htons(ETH_P_IPV6)) {
-+		wlen += sizeof(struct ipv6hdr);
-+		if (!pskb_may_pull(skb, wlen))
-+			goto out;
-+
-+		proto = NFPROTO_IPV6;
-+	} else {
-+		goto out;
-+	}
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (!ct) { /* look harder, usually ingress */
-+		if (!nf_ct_get_tuplepr(skb, skb_network_offset(skb),
-+				       proto, cp->net, &tuple))
-+			goto out;
-+		zone.id = cp->zone;
-+		zone.dir = NF_CT_DEFAULT_ZONE_DIR;
-+
-+		thash = nf_conntrack_find_get(cp->net, &zone, &tuple);
-+		if (!thash)
-+			goto out;
-+
-+		ct = nf_ct_tuplehash_to_ctrack(thash);
-+	}
-+
-+	if (cp->mode & CTINFO_MODE_DSCP)
-+		if (!cp->dscpstatemask || (ct->mark & cp->dscpstatemask))
-+			tcf_ctinfo_dscp_set(ct, ca, cp, skb, wlen, proto);
-+
-+	if (cp->mode & CTINFO_MODE_CPMARK)
-+		tcf_ctinfo_cpmark_set(ct, ca, cp, skb);
-+
-+	if (thash)
-+		nf_ct_put(ct);
-+out:
-+	return action;
-+}
-+
-+static const struct nla_policy ctinfo_policy[TCA_CTINFO_MAX + 1] = {
-+	[TCA_CTINFO_ACT]		  = { .len = sizeof(struct
-+							    tc_ctinfo) },
-+	[TCA_CTINFO_ZONE]		  = { .type = NLA_U16 },
-+	[TCA_CTINFO_PARMS_DSCP_MASK]	  = { .type = NLA_U32 },
-+	[TCA_CTINFO_PARMS_DSCP_STATEMASK] = { .type = NLA_U32 },
-+	[TCA_CTINFO_PARMS_CPMARK_MASK]	  = { .type = NLA_U32 },
-+};
-+
-+static int tcf_ctinfo_init(struct net *net, struct nlattr *nla,
-+			   struct nlattr *est, struct tc_action **a,
-+			   int ovr, int bind, bool rtnl_held,
-+			   struct netlink_ext_ack *extack)
-+{
-+	struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
-+	struct nlattr *tb[TCA_CTINFO_MAX + 1];
-+	struct tcf_ctinfo_params *cp_new;
-+/*	struct tcf_chain *goto_ch = NULL; */
-+	u32 dscpmask = 0, dscpstatemask;
-+	struct tc_ctinfo *actparm;
-+	struct tcf_ctinfo *ci;
-+	u8 dscpmaskshift;
-+	int ret = 0, err;
-+
-+	if (!nla)
-+		return -EINVAL;
-+
-+	err = nla_parse_nested(tb, TCA_CTINFO_MAX, nla, ctinfo_policy, NULL);
-+	if (err < 0)
-+		return err;
-+
-+	if (!tb[TCA_CTINFO_ACT])
-+		return -EINVAL;
-+	actparm = nla_data(tb[TCA_CTINFO_ACT]);
-+
-+	/* do some basic validation here before dynamically allocating things */
-+	/* that we would otherwise have to clean up.			      */
-+	if (tb[TCA_CTINFO_PARMS_DSCP_MASK]) {
-+		dscpmask = nla_get_u32(tb[TCA_CTINFO_PARMS_DSCP_MASK]);
-+		/* need contiguous 6 bit mask */
-+		dscpmaskshift = dscpmask ? __ffs(dscpmask) : 0;
-+		if ((~0 & (dscpmask >> dscpmaskshift)) != 0x3f)
-+			return -EINVAL;
-+		dscpstatemask = tb[TCA_CTINFO_PARMS_DSCP_STATEMASK] ?
-+			nla_get_u32(tb[TCA_CTINFO_PARMS_DSCP_STATEMASK]) : 0;
-+		/* mask & statemask must not overlap */
-+		if (dscpmask & dscpstatemask)
-+			return -EINVAL;
-+	}
-+
-+	/* done the validation:now to the actual action allocation */
-+	err = tcf_idr_check_alloc(tn, &actparm->index, a, bind);
-+	if (!err) {
-+		ret = tcf_idr_create(tn, actparm->index, est, a,
-+				     &act_ctinfo_ops, bind, false);
-+		if (ret) {
-+			tcf_idr_cleanup(tn, actparm->index);
-+			return ret;
-+		}
-+		ret = ACT_P_CREATED;
-+	} else if (err > 0) {
-+		if (bind) /* don't override defaults */
-+			return 0;
-+		if (!ovr) {
-+			tcf_idr_release(*a, bind);
-+			return -EEXIST;
-+		}
-+	} else {
-+		return err;
-+	}
-+
-+/*	err = tcf_action_check_ctrlact(actparm->action, tp, &goto_ch, extack);
-+	if (err < 0)
-+		goto release_idr;
-+		*/
-+
-+	ci = to_ctinfo(*a);
-+
-+	cp_new = kzalloc(sizeof(*cp_new), GFP_KERNEL);
-+	if (unlikely(!cp_new)) {
-+		err = -ENOMEM;
-+		goto put_chain;
-+	}
-+
-+	cp_new->net = net;
-+	cp_new->zone = tb[TCA_CTINFO_ZONE] ?
-+			nla_get_u16(tb[TCA_CTINFO_ZONE]) : 0;
-+	if (dscpmask) {
-+		cp_new->dscpmask = dscpmask;
-+		cp_new->dscpmaskshift = dscpmaskshift;
-+		cp_new->dscpstatemask = dscpstatemask;
-+		cp_new->mode |= CTINFO_MODE_DSCP;
-+	}
-+
-+	if (tb[TCA_CTINFO_PARMS_CPMARK_MASK]) {
-+		cp_new->cpmarkmask =
-+				nla_get_u32(tb[TCA_CTINFO_PARMS_CPMARK_MASK]);
-+		cp_new->mode |= CTINFO_MODE_CPMARK;
-+	}
-+
-+	spin_lock_bh(&ci->tcf_lock);
-+/*	goto_ch = tcf_action_set_ctrlact(*a, actparm->action, goto_ch); */
-+	ci->tcf_action = actparm->action;
-+	rcu_swap_protected(ci->params, cp_new,
-+			   lockdep_is_held(&ci->tcf_lock));
-+	spin_unlock_bh(&ci->tcf_lock);
-+
-+/*	if (goto_ch)
-+		tcf_chain_put_by_act(goto_ch); */
-+	if (cp_new)
-+		kfree_rcu(cp_new, rcu);
-+
-+	if (ret == ACT_P_CREATED)
-+		tcf_idr_insert(tn, *a);
-+
-+	return ret;
-+
-+put_chain:
-+/*	if (goto_ch)
-+		tcf_chain_put_by_act(goto_ch);
-+release_idr: */
-+	tcf_idr_release(*a, bind);
-+	return err;
-+}
-+
-+static int tcf_ctinfo_dump(struct sk_buff *skb, struct tc_action *a,
-+			   int bind, int ref)
-+{
-+	struct tcf_ctinfo *ci = to_ctinfo(a);
-+	struct tc_ctinfo opt = {
-+		.index   = ci->tcf_index,
-+		.refcnt  = refcount_read(&ci->tcf_refcnt) - ref,
-+		.bindcnt = atomic_read(&ci->tcf_bindcnt) - bind,
-+	};
-+	unsigned char *b = skb_tail_pointer(skb);
-+	struct tcf_ctinfo_params *cp;
-+	struct tcf_t t;
-+
-+	spin_lock_bh(&ci->tcf_lock);
-+	cp = rcu_dereference_protected(ci->params,
-+				       lockdep_is_held(&ci->tcf_lock));
-+
-+	tcf_tm_dump(&t, &ci->tcf_tm);
-+	if (nla_put_64bit(skb, TCA_CTINFO_TM, sizeof(t), &t, TCA_CTINFO_PAD))
-+		goto nla_put_failure;
-+
-+	opt.action = ci->tcf_action;
-+	if (nla_put(skb, TCA_CTINFO_ACT, sizeof(opt), &opt))
-+		goto nla_put_failure;
-+
-+	if (nla_put_u16(skb, TCA_CTINFO_ZONE, cp->zone))
-+		goto nla_put_failure;
-+
-+	if (cp->mode & CTINFO_MODE_DSCP) {
-+		if (nla_put_u32(skb, TCA_CTINFO_PARMS_DSCP_MASK,
-+				cp->dscpmask))
-+			goto nla_put_failure;
-+		if (nla_put_u32(skb, TCA_CTINFO_PARMS_DSCP_STATEMASK,
-+				cp->dscpstatemask))
-+			goto nla_put_failure;
-+	}
-+
-+	if (cp->mode & CTINFO_MODE_CPMARK) {
-+		if (nla_put_u32(skb, TCA_CTINFO_PARMS_CPMARK_MASK,
-+				cp->cpmarkmask))
-+			goto nla_put_failure;
-+	}
-+
-+	if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_DSCP_SET,
-+			      ci->stats_dscp_set, TCA_CTINFO_PAD))
-+		goto nla_put_failure;
-+
-+	if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_DSCP_ERROR,
-+			      ci->stats_dscp_error, TCA_CTINFO_PAD))
-+		goto nla_put_failure;
-+
-+	if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_CPMARK_SET,
-+			      ci->stats_cpmark_set, TCA_CTINFO_PAD))
-+		goto nla_put_failure;
-+
-+	spin_unlock_bh(&ci->tcf_lock);
-+	return skb->len;
-+
-+nla_put_failure:
-+	spin_unlock_bh(&ci->tcf_lock);
-+	nlmsg_trim(skb, b);
-+	return -1;
-+}
-+
-+static int tcf_ctinfo_walker(struct net *net, struct sk_buff *skb,
-+			     struct netlink_callback *cb, int type,
-+			     const struct tc_action_ops *ops,
-+			     struct netlink_ext_ack *extack)
-+{
-+	struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
-+
-+	return tcf_generic_walker(tn, skb, cb, type, ops, extack);
-+}
-+
-+static int tcf_ctinfo_search(struct net *net, struct tc_action **a, u32 index,
-+			     struct netlink_ext_ack *extack)
-+{
-+	struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
-+
-+	return tcf_idr_search(tn, a, index);
-+}
-+
-+static struct tc_action_ops act_ctinfo_ops = {
-+	.kind	= "ctinfo",
-+	.type	= TCA_ID_CTINFO,
-+	.owner	= THIS_MODULE,
-+	.act	= tcf_ctinfo_act,
-+	.dump	= tcf_ctinfo_dump,
-+	.init	= tcf_ctinfo_init,
-+	.walk	= tcf_ctinfo_walker,
-+	.lookup	= tcf_ctinfo_search,
-+	.size	= sizeof(struct tcf_ctinfo),
-+};
-+
-+static __net_init int ctinfo_init_net(struct net *net)
-+{
-+	struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
-+
-+	return tc_action_net_init(tn, &act_ctinfo_ops);
-+}
-+
-+static void __net_exit ctinfo_exit_net(struct list_head *net_list)
-+{
-+	tc_action_net_exit(net_list, ctinfo_net_id);
-+}
-+
-+static struct pernet_operations ctinfo_net_ops = {
-+	.init		= ctinfo_init_net,
-+	.exit_batch	= ctinfo_exit_net,
-+	.id		= &ctinfo_net_id,
-+	.size		= sizeof(struct tc_action_net),
-+};
-+
-+static int __init ctinfo_init_module(void)
-+{
-+	return tcf_register_action(&act_ctinfo_ops, &ctinfo_net_ops);
-+}
-+
-+static void __exit ctinfo_cleanup_module(void)
-+{
-+	tcf_unregister_action(&act_ctinfo_ops, &ctinfo_net_ops);
-+}
-+
-+module_init(ctinfo_init_module);
-+module_exit(ctinfo_cleanup_module);
-+MODULE_AUTHOR("Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>");
-+MODULE_DESCRIPTION("Connection tracking mark actions");
-+MODULE_LICENSE("GPL");
-diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config
-index 203302065458..9d1fddcfb887 100644
---- a/tools/testing/selftests/tc-testing/config
-+++ b/tools/testing/selftests/tc-testing/config
-@@ -37,6 +37,7 @@ CONFIG_NET_ACT_SKBEDIT=m
- CONFIG_NET_ACT_CSUM=m
- CONFIG_NET_ACT_VLAN=m
- CONFIG_NET_ACT_BPF=m
-+CONFIG_NET_ACT_CONNDSCP=m
- CONFIG_NET_ACT_CONNMARK=m
- CONFIG_NET_ACT_SKBMOD=m
- CONFIG_NET_ACT_IFE=m
--- 
-2.20.1 (Apple Git-117)
-
diff --git a/target/linux/generic/backport-4.19/450-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch b/target/linux/generic/backport-4.19/450-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
deleted file mode 100644
index 15f761ab9d..0000000000
--- a/target/linux/generic/backport-4.19/450-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From c93c613214ac70c87beab5422a60077bf126b855 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Wed, 28 Nov 2018 21:07:25 +0800
-Subject: [PATCH] mtd: spinand: add support for GigaDevice GD5FxGQ4xA
-
-Add support for GigaDevice GD5F1G/2G/4GQ4xA SPI NAND.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/Makefile     |   2 +-
- drivers/mtd/nand/spi/core.c       |   1 +
- drivers/mtd/nand/spi/gigadevice.c | 148 ++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/spinand.h       |   1 +
- 4 files changed, 151 insertions(+), 1 deletion(-)
- create mode 100644 drivers/mtd/nand/spi/gigadevice.c
-
---- a/drivers/mtd/nand/spi/Makefile
-+++ b/drivers/mtd/nand/spi/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--spinand-objs := core.o macronix.o micron.o winbond.o
-+spinand-objs := core.o gigadevice.o macronix.o micron.o winbond.o
- obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -762,6 +762,7 @@ static const struct nand_ops spinand_ops
- };
- 
- static const struct spinand_manufacturer *spinand_manufacturers[] = {
-+	&gigadevice_spinand_manufacturer,
- 	&macronix_spinand_manufacturer,
- 	&micron_spinand_manufacturer,
- 	&winbond_spinand_manufacturer,
---- /dev/null
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -0,0 +1,148 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Author:
-+ *	Chuanhong Guo <gch981213@gmail.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/spinand.h>
-+
-+#define SPINAND_MFR_GIGADEVICE			0xC8
-+#define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
-+#define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
-+
-+static SPINAND_OP_VARIANTS(read_cache_variants,
-+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(write_cache_variants,
-+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
-+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(update_cache_variants,
-+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
-+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
-+
-+static int gd5fxgq4xa_ooblayout_ecc(struct mtd_info *mtd, int section,
-+				  struct mtd_oob_region *region)
-+{
-+	if (section > 3)
-+		return -ERANGE;
-+
-+	region->offset = (16 * section) + 8;
-+	region->length = 8;
-+
-+	return 0;
-+}
-+
-+static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
-+				   struct mtd_oob_region *region)
-+{
-+	if (section > 3)
-+		return -ERANGE;
-+
-+	if (section) {
-+		region->offset = 16 * section;
-+		region->length = 8;
-+	} else {
-+		/* section 0 has one byte reserved for bad block mark */
-+		region->offset = 1;
-+		region->length = 7;
-+	}
-+	return 0;
-+}
-+
-+static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
-+					 u8 status)
-+{
-+	switch (status & STATUS_ECC_MASK) {
-+	case STATUS_ECC_NO_BITFLIPS:
-+		return 0;
-+
-+	case GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS:
-+		/* 1-7 bits are flipped. return the maximum. */
-+		return 7;
-+
-+	case GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS:
-+		return 8;
-+
-+	case STATUS_ECC_UNCOR_ERROR:
-+		return -EBADMSG;
-+
-+	default:
-+		break;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
-+	.ecc = gd5fxgq4xa_ooblayout_ecc,
-+	.free = gd5fxgq4xa_ooblayout_free,
-+};
-+
-+static const struct spinand_info gigadevice_spinand_table[] = {
-+	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
-+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
-+				     gd5fxgq4xa_ecc_get_status)),
-+	SPINAND_INFO("GD5F2GQ4xA", 0xF2,
-+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
-+				     gd5fxgq4xa_ecc_get_status)),
-+	SPINAND_INFO("GD5F4GQ4xA", 0xF4,
-+		     NAND_MEMORG(1, 2048, 64, 64, 4096, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
-+				     gd5fxgq4xa_ecc_get_status)),
-+};
-+
-+static int gigadevice_spinand_detect(struct spinand_device *spinand)
-+{
-+	u8 *id = spinand->id.data;
-+	int ret;
-+
-+	/*
-+	 * For GD NANDs, There is an address byte needed to shift in before IDs
-+	 * are read out, so the first byte in raw_id is dummy.
-+	 */
-+	if (id[1] != SPINAND_MFR_GIGADEVICE)
-+		return 0;
-+
-+	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
-+				     ARRAY_SIZE(gigadevice_spinand_table),
-+				     id[2]);
-+	if (ret)
-+		return ret;
-+
-+	return 1;
-+}
-+
-+static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
-+	.detect = gigadevice_spinand_detect,
-+};
-+
-+const struct spinand_manufacturer gigadevice_spinand_manufacturer = {
-+	.id = SPINAND_MFR_GIGADEVICE,
-+	.name = "GigaDevice",
-+	.ops = &gigadevice_spinand_manuf_ops,
-+};
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -194,6 +194,7 @@ struct spinand_manufacturer {
- };
- 
- /* SPI NAND manufacturers */
-+extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
- extern const struct spinand_manufacturer macronix_spinand_manufacturer;
- extern const struct spinand_manufacturer micron_spinand_manufacturer;
- extern const struct spinand_manufacturer winbond_spinand_manufacturer;
diff --git a/target/linux/generic/backport-4.19/451-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch b/target/linux/generic/backport-4.19/451-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
deleted file mode 100644
index f6d6764707..0000000000
--- a/target/linux/generic/backport-4.19/451-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From c40c7a990a46e5102a1cc4190557bf315d32d80d Mon Sep 17 00:00:00 2001
-From: Stefan Roese <sr@denx.de>
-Date: Thu, 24 Jan 2019 13:48:06 +0100
-Subject: [PATCH] mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG
-
-Add support for GigaDevice GD5F1GQ4UExxG SPI NAND chip.
-
-Signed-off-by: Stefan Roese <sr@denx.de>
-Cc: Chuanhong Guo <gch981213@gmail.com>
-Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
-Cc: Miquel Raynal <miquel.raynal@bootlin.com>
-Cc: Boris Brezillon <bbrezillon@kernel.org>
-Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/gigadevice.c | 83 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 83 insertions(+)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -12,6 +12,8 @@
- #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
- #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
- 
-+#define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
-+
- static SPINAND_OP_VARIANTS(read_cache_variants,
- 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
- 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-@@ -81,11 +83,83 @@ static int gd5fxgq4xa_ecc_get_status(str
- 	return -EINVAL;
- }
- 
-+static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
-+				       struct mtd_oob_region *region)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	region->offset = 64;
-+	region->length = 64;
-+
-+	return 0;
-+}
-+
-+static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
-+					struct mtd_oob_region *region)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	/* Reserve 1 bytes for the BBM. */
-+	region->offset = 1;
-+	region->length = 63;
-+
-+	return 0;
-+}
-+
-+static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
-+					u8 status)
-+{
-+	u8 status2;
-+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQ4UEXXG_REG_STATUS2,
-+						      &status2);
-+	int ret;
-+
-+	switch (status & STATUS_ECC_MASK) {
-+	case STATUS_ECC_NO_BITFLIPS:
-+		return 0;
-+
-+	case GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS:
-+		/*
-+		 * Read status2 register to determine a more fine grained
-+		 * bit error status
-+		 */
-+		ret = spi_mem_exec_op(spinand->spimem, &op);
-+		if (ret)
-+			return ret;
-+
-+		/*
-+		 * 4 ... 7 bits are flipped (1..4 can't be detected, so
-+		 * report the maximum of 4 in this case
-+		 */
-+		/* bits sorted this way (3...0): ECCS1,ECCS0,ECCSE1,ECCSE0 */
-+		return ((status & STATUS_ECC_MASK) >> 2) |
-+			((status2 & STATUS_ECC_MASK) >> 4);
-+
-+	case GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS:
-+		return 8;
-+
-+	case STATUS_ECC_UNCOR_ERROR:
-+		return -EBADMSG;
-+
-+	default:
-+		break;
-+	}
-+
-+	return -EINVAL;
-+}
-+
- static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
- 	.ecc = gd5fxgq4xa_ooblayout_ecc,
- 	.free = gd5fxgq4xa_ooblayout_free,
- };
- 
-+static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
-+	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
-+	.free = gd5fxgq4uexxg_ooblayout_free,
-+};
-+
- static const struct spinand_info gigadevice_spinand_table[] = {
- 	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
- 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
-@@ -114,6 +188,15 @@ static const struct spinand_info gigadev
- 		     0,
- 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
- 				     gd5fxgq4xa_ecc_get_status)),
-+	SPINAND_INFO("GD5F1GQ4UExxG", 0xd1,
-+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
-+				     gd5fxgq4uexxg_ecc_get_status)),
- };
- 
- static int gigadevice_spinand_detect(struct spinand_device *spinand)
diff --git a/target/linux/generic/backport-4.19/500-v4.20-ubifs-Fix-default-compression-selection-in-ubifs.patch b/target/linux/generic/backport-4.19/500-v4.20-ubifs-Fix-default-compression-selection-in-ubifs.patch
deleted file mode 100644
index 7bd3ed9fad..0000000000
--- a/target/linux/generic/backport-4.19/500-v4.20-ubifs-Fix-default-compression-selection-in-ubifs.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From d62e98ed1efcaa94caa004f622944afdce5f1c3c Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 9 Dec 2018 18:12:13 +0100
-Subject: [PATCH] ubifs: Fix default compression selection in ubifs
-
-When ubifs is build without the LZO compressor and no compressor is
-given the creation of the default file system will fail. before
-selection the LZO compressor check if it is present and if not fall back
-to the zlib or none.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- fs/ubifs/sb.c | 13 ++++++++++++-
- 1 file changed, 12 insertions(+), 1 deletion(-)
-
---- a/fs/ubifs/sb.c
-+++ b/fs/ubifs/sb.c
-@@ -63,6 +63,17 @@
- /* Default time granularity in nanoseconds */
- #define DEFAULT_TIME_GRAN 1000000000
- 
-+static int get_default_compressor(struct ubifs_info *c)
-+{
-+	if (ubifs_compr_present(c, UBIFS_COMPR_LZO))
-+		return UBIFS_COMPR_LZO;
-+
-+	if (ubifs_compr_present(c, UBIFS_COMPR_ZLIB))
-+		return UBIFS_COMPR_ZLIB;
-+
-+	return UBIFS_COMPR_NONE;
-+}
-+
- /**
-  * create_default_filesystem - format empty UBI volume.
-  * @c: UBIFS file-system description object
-@@ -186,7 +197,7 @@ static int create_default_filesystem(str
- 	if (c->mount_opts.override_compr)
- 		sup->default_compr = cpu_to_le16(c->mount_opts.compr_type);
- 	else
--		sup->default_compr = cpu_to_le16(UBIFS_COMPR_LZO);
-+		sup->default_compr = cpu_to_le16(get_default_compressor(c));
- 
- 	generate_random_uuid(sup->uuid);
- 
diff --git a/target/linux/generic/backport-4.9/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch b/target/linux/generic/backport-4.9/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
deleted file mode 100644
index 1115ee1ba2..0000000000
--- a/target/linux/generic/backport-4.9/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 13b1ecc3401653a355798eb1dee10cc1608202f4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 18 Jan 2016 12:27:49 +0100
-Subject: [PATCH 33/34] Kbuild: don't hardcode path to awk in
- scripts/ld-version.sh
-
-On some systems /usr/bin/awk does not exist, or is broken. Find it via
-$PATH instead.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- scripts/ld-version.sh | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/scripts/ld-version.sh
-+++ b/scripts/ld-version.sh
-@@ -1,5 +1,6 @@
--#!/usr/bin/awk -f
-+#!/bin/sh
- # extract linker version number from stdin and turn into single number
-+exec awk '
- 	{
- 	gsub(".*\\)", "");
- 	gsub(".*version ", "");
-@@ -8,3 +9,4 @@
- 	print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
- 	exit
- 	}
-+'
diff --git a/target/linux/generic/backport-4.9/011-kbuild-export-SUBARCH.patch b/target/linux/generic/backport-4.9/011-kbuild-export-SUBARCH.patch
deleted file mode 100644
index 6ef95db8dd..0000000000
--- a/target/linux/generic/backport-4.9/011-kbuild-export-SUBARCH.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 173019b66dcc9d68ad9333aa744dad1e369b5aa8 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 9 Jul 2017 00:26:53 +0200
-Subject: [PATCH 34/34] kernel: add compile fix for linux 4.9 on x86
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -406,8 +406,8 @@ KERNELRELEASE = $(shell cat include/conf
- KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
- 
- export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
--export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
--export CPP AR NM STRIP OBJCOPY OBJDUMP
-+export ARCH SRCARCH SUBARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD
-+export CC CPP AR NM STRIP OBJCOPY OBJDUMP
- export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
- export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
- 
diff --git a/target/linux/generic/backport-4.9/012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch b/target/linux/generic/backport-4.9/012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch
deleted file mode 100644
index 4b22ca0e3f..0000000000
--- a/target/linux/generic/backport-4.9/012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 19 Jun 2018 13:14:56 -0700
-Subject: [PATCH] kbuild: add macro for controlling warnings to
- linux/compiler.h
-
-I have occasionally run into a situation where it would make sense to
-control a compiler warning from a source file rather than doing so from
-a Makefile using the $(cc-disable-warning, ...) or $(cc-option, ...)
-helpers.
-
-The approach here is similar to what glibc uses, using __diag() and
-related macros to encapsulate a _Pragma("GCC diagnostic ...") statement
-that gets turned into the respective "#pragma GCC diagnostic ..." by
-the preprocessor when the macro gets expanded.
-
-Like glibc, I also have an argument to pass the affected compiler
-version, but decided to actually evaluate that one. For now, this
-supports GCC_4_6, GCC_4_7, GCC_4_8, GCC_4_9, GCC_5, GCC_6, GCC_7,
-GCC_8 and GCC_9. Adding support for CLANG_5 and other interesting
-versions is straightforward here. GNU compilers starting with gcc-4.2
-could support it in principle, but "#pragma GCC diagnostic push"
-was only added in gcc-4.6, so it seems simpler to not deal with those
-at all. The same versions show a large number of warnings already,
-so it seems easier to just leave it at that and not do a more
-fine-grained control for them.
-
-The use cases I found so far include:
-
-- turning off the gcc-8 -Wattribute-alias warning inside of the
-  SYSCALL_DEFINEx() macro without having to do it globally.
-
-- Reducing the build time for a simple re-make after a change,
-  once we move the warnings from ./Makefile and
-  ./scripts/Makefile.extrawarn into linux/compiler.h
-
-- More control over the warnings based on other configurations,
-  using preprocessor syntax instead of Makefile syntax. This should make
-  it easier for the average developer to understand and change things.
-
-- Adding an easy way to turn the W=1 option on unconditionally
-  for a subdirectory or a specific file. This has been requested
-  by several developers in the past that want to have their subsystems
-  W=1 clean.
-
-- Integrating clang better into the build systems. Clang supports
-  more warnings than GCC, and we probably want to classify them
-  as default, W=1, W=2 etc, but there are cases in which the
-  warnings should be classified differently due to excessive false
-  positives from one or the other compiler.
-
-- Adding a way to turn the default warnings into errors (e.g. using
-  a new "make E=0" tag) while not also turning the W=1 warnings into
-  errors.
-
-This patch for now just adds the minimal infrastructure in order to
-do the first of the list above. As the #pragma GCC diagnostic
-takes precedence over command line options, the next step would be
-to convert a lot of the individual Makefiles that set nonstandard
-options to use __diag() instead.
-
-[paul.burton@mips.com:
-  - Rebase atop current master.
-  - Add __diag_GCC, or more generally __diag_<compiler>, abstraction to
-    avoid code outside of linux/compiler-gcc.h needing to duplicate
-    knowledge about different GCC versions.
-  - Add a comment argument to __diag_{ignore,warn,error} which isn't
-    used in the expansion of the macros but serves to push people to
-    document the reason for using them - per feedback from Kees Cook.
-  - Translate severity to GCC-specific pragmas in linux/compiler-gcc.h
-    rather than using GCC-specific in linux/compiler_types.h.
-  - Drop all but GCC 8 macros, since we only need to define macros for
-    versions that we need to introduce pragmas for, and as of this
-    series that's just GCC 8.
-  - Capitalize comments in linux/compiler-gcc.h to match the style of
-    the rest of the file.
-  - Line up macro definitions with tabs in linux/compiler-gcc.h.]
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
-Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
-Tested-by: Stafford Horne <shorne@gmail.com>
-Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
----
-
---- a/include/linux/compiler-gcc.h
-+++ b/include/linux/compiler-gcc.h
-@@ -338,3 +338,30 @@
- #if GCC_VERSION >= 50100
- #define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
- #endif
-+
-+
-+/*
-+ * Turn individual warnings and errors on and off locally, depending
-+ * on version.
-+ */
-+#define __diag_GCC(version, severity, s) \
-+	__diag_GCC_ ## version(__diag_GCC_ ## severity s)
-+
-+/* Severity used in pragma directives */
-+#define __diag_GCC_ignore	ignored
-+#define __diag_GCC_warn		warning
-+#define __diag_GCC_error	error
-+
-+/* Compilers before gcc-4.6 do not understand "#pragma GCC diagnostic push" */
-+#if GCC_VERSION >= 40600
-+#define __diag_str1(s)		#s
-+#define __diag_str(s)		__diag_str1(s)
-+#define __diag(s)		_Pragma(__diag_str(GCC diagnostic s))
-+#endif
-+
-+#if GCC_VERSION >= 80000
-+#define __diag_GCC_8(s)		__diag(s)
-+#else
-+#define __diag_GCC_8(s)
-+#endif
-+
---- a/include/linux/compiler.h
-+++ b/include/linux/compiler.h
-@@ -578,4 +578,23 @@ static __always_inline void __write_once
- # define __kprobes
- # define nokprobe_inline	inline
- #endif
-+
-+#ifndef __diag
-+#define __diag(string)
-+#endif
-+
-+#ifndef __diag_GCC
-+#define __diag_GCC(version, severity, string)
-+#endif
-+
-+#define __diag_push()	__diag(push)
-+#define __diag_pop()	__diag(pop)
-+
-+#define __diag_ignore(compiler, version, option, comment) \
-+	__diag_ ## compiler(version, ignore, option)
-+#define __diag_warn(compiler, version, option, comment) \
-+	__diag_ ## compiler(version, warn, option)
-+#define __diag_error(compiler, version, option, comment) \
-+	__diag_ ## compiler(version, error, option)
-+
- #endif /* __LINUX_COMPILER_H */
diff --git a/target/linux/generic/backport-4.9/013-disable-Wattribute-alias-warning-for-SYSCALL_DEFINEx.patch b/target/linux/generic/backport-4.9/013-disable-Wattribute-alias-warning-for-SYSCALL_DEFINEx.patch
deleted file mode 100644
index fc2a26d7cd..0000000000
--- a/target/linux/generic/backport-4.9/013-disable-Wattribute-alias-warning-for-SYSCALL_DEFINEx.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 19 Jun 2018 13:14:57 -0700
-Subject: [PATCH] disable -Wattribute-alias warning for SYSCALL_DEFINEx()
-
-gcc-8 warns for every single definition of a system call entry
-point, e.g.:
-
-include/linux/compat.h:56:18: error: 'compat_sys_rt_sigprocmask' alias between functions of incompatible types 'long int(int,  compat_sigset_t *, compat_sigset_t *, compat_size_t)' {aka 'long int(int,  struct <anonymous> *, struct <anonymous> *, unsigned int)'} and 'long int(long int,  long int,  long int,  long int)' [-Werror=attribute-alias]
-  asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))\
-                  ^~~~~~~~~~
-include/linux/compat.h:45:2: note: in expansion of macro 'COMPAT_SYSCALL_DEFINEx'
-  COMPAT_SYSCALL_DEFINEx(4, _##name, __VA_ARGS__)
-  ^~~~~~~~~~~~~~~~~~~~~~
-kernel/signal.c:2601:1: note: in expansion of macro 'COMPAT_SYSCALL_DEFINE4'
- COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset,
- ^~~~~~~~~~~~~~~~~~~~~~
-include/linux/compat.h:60:18: note: aliased declaration here
-  asmlinkage long compat_SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__))\
-                  ^~~~~~~~~~
-
-The new warning seems reasonable in principle, but it doesn't
-help us here, since we rely on the type mismatch to sanitize the
-system call arguments. After I reported this as GCC PR82435, a new
--Wno-attribute-alias option was added that could be used to turn the
-warning off globally on the command line, but I'd prefer to do it a
-little more fine-grained.
-
-Interestingly, turning a warning off and on again inside of
-a single macro doesn't always work, in this case I had to add
-an extra statement inbetween and decided to copy the __SC_TEST
-one from the native syscall to the compat syscall macro.  See
-https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 for more details
-about this.
-
-[paul.burton@mips.com:
-  - Rebase atop current master.
-  - Split GCC & version arguments to __diag_ignore() in order to match
-    changes to the preceding patch.
-  - Add the comment argument to match the preceding patch.]
-
-Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
-Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
-Tested-by: Stafford Horne <shorne@gmail.com>
-Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
----
-
---- a/include/linux/compat.h
-+++ b/include/linux/compat.h
-@@ -47,6 +47,9 @@
- 	COMPAT_SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
- 
- #define COMPAT_SYSCALL_DEFINEx(x, name, ...)				\
-+	__diag_push();							\
-+	__diag_ignore(GCC, 8, "-Wattribute-alias",			\
-+		      "Type aliasing is used to sanitize syscall arguments");\
- 	asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))\
- 		__attribute__((alias(__stringify(compat_SyS##name))));  \
- 	static inline long C_SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__));\
-@@ -55,6 +58,7 @@
- 	{								\
- 		return C_SYSC##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));	\
- 	}								\
-+	__diag_pop();							\
- 	static inline long C_SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__))
- 
- #ifndef compat_user_stack_pointer
---- a/include/linux/syscalls.h
-+++ b/include/linux/syscalls.h
-@@ -192,6 +192,9 @@ extern struct trace_event_functions exit
- 
- #define __PROTECT(...) asmlinkage_protect(__VA_ARGS__)
- #define __SYSCALL_DEFINEx(x, name, ...)					\
-+	__diag_push();							\
-+	__diag_ignore(GCC, 8, "-Wattribute-alias",			\
-+		      "Type aliasing is used to sanitize syscall arguments");\
- 	asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))	\
- 		__attribute__((alias(__stringify(SyS##name))));		\
- 	static inline long SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__));	\
-@@ -203,6 +206,7 @@ extern struct trace_event_functions exit
- 		__PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__));	\
- 		return ret;						\
- 	}								\
-+	__diag_pop();							\
- 	static inline long SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__))
- 
- asmlinkage long sys32_quotactl(unsigned int cmd, const char __user *special,
diff --git a/target/linux/generic/backport-4.9/020-backport_netfilter_rtcache.patch b/target/linux/generic/backport-4.9/020-backport_netfilter_rtcache.patch
deleted file mode 100644
index e7c9b4c702..0000000000
--- a/target/linux/generic/backport-4.9/020-backport_netfilter_rtcache.patch
+++ /dev/null
@@ -1,543 +0,0 @@
-From c4d66e57455f5384128753674cc0f9e02db5e1f6 Mon Sep 17 00:00:00 2001
-From: Florian Westphal <fw@strlen.de>
-Date: Sun, 9 Jul 2017 08:58:30 +0200
-Subject: [PATCH] netfilter: conntrack: cache route for forwarded connections
-
-... to avoid per-packet FIB lookup if possible.
-
-The cached dst is re-used provided the input interface
-is the same as that of the previous packet in the same direction.
-
-If not, the cached dst is invalidated.
-
-For ipv6 we also need to store sernum, else dst_check doesn't work,
-pointed out by Eric Dumazet.
-
-This should speed up forwarding when conntrack is already in use
-anyway, especially when using reverse path filtering -- active RPF
-enforces two FIB lookups for each packet.
-
-Before the routing cache removal this didn't matter since RPF was performed
-only when route cache didn't yield a result; but without route cache it
-comes at higher price.
-
-Julian Anastasov suggested to add NETDEV_UNREGISTER handler to
-avoid holding on to dsts of 'frozen' conntracks.
-
-Signed-off-by: Florian Westphal <fw@strlen.de>
----
- include/net/netfilter/nf_conntrack_extend.h  |   4 +
- include/net/netfilter/nf_conntrack_rtcache.h |  34 +++
- net/netfilter/Kconfig                        |  12 +
- net/netfilter/Makefile                       |   3 +
- net/netfilter/nf_conntrack_rtcache.c         | 413 +++++++++++++++++++++++++++
- 5 files changed, 466 insertions(+)
- create mode 100644 include/net/netfilter/nf_conntrack_rtcache.h
- create mode 100644 net/netfilter/nf_conntrack_rtcache.c
-
---- a/include/net/netfilter/nf_conntrack_extend.h
-+++ b/include/net/netfilter/nf_conntrack_extend.h
-@@ -27,6 +27,9 @@ enum nf_ct_ext_id {
- #if IS_ENABLED(CONFIG_NETFILTER_SYNPROXY)
- 	NF_CT_EXT_SYNPROXY,
- #endif
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
-+	NF_CT_EXT_RTCACHE,
-+#endif
- 	NF_CT_EXT_NUM,
- };
- 
-@@ -39,6 +42,7 @@ enum nf_ct_ext_id {
- #define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout
- #define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels
- #define NF_CT_EXT_SYNPROXY_TYPE struct nf_conn_synproxy
-+#define NF_CT_EXT_RTCACHE_TYPE struct nf_conn_rtcache
- 
- /* Extensions: optional stuff which isn't permanently in struct. */
- struct nf_ct_ext {
---- /dev/null
-+++ b/include/net/netfilter/nf_conntrack_rtcache.h
-@@ -0,0 +1,34 @@
-+#include <linux/gfp.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+
-+struct dst_entry;
-+
-+struct nf_conn_dst_cache {
-+	struct dst_entry *dst;
-+	int iif;
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+	u32 cookie;
-+#endif
-+
-+};
-+
-+struct nf_conn_rtcache {
-+	struct nf_conn_dst_cache cached_dst[IP_CT_DIR_MAX];
-+};
-+
-+static inline
-+struct nf_conn_rtcache *nf_ct_rtcache_find(const struct nf_conn *ct)
-+{
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
-+	return nf_ct_ext_find(ct, NF_CT_EXT_RTCACHE);
-+#else
-+	return NULL;
-+#endif
-+}
-+
-+static inline int nf_conn_rtcache_iif_get(const struct nf_conn_rtcache *rtc,
-+					  enum ip_conntrack_dir dir)
-+{
-+	return rtc->cached_dst[dir].iif;
-+}
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -114,6 +114,18 @@ config NF_CONNTRACK_EVENTS
- 
- 	  If unsure, say `N'.
- 
-+config NF_CONNTRACK_RTCACHE
-+	tristate "Cache route entries in conntrack objects"
-+	depends on NETFILTER_ADVANCED
-+	depends on NF_CONNTRACK
-+	help
-+	  If this option is enabled, the connection tracking code will
-+	  cache routing information for each connection that is being
-+	  forwarded, at a cost of 32 bytes per conntrack object.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+	  The module will be called nf_conntrack_rtcache.
-+
- config NF_CONNTRACK_TIMEOUT
- 	bool  'Connection tracking timeout'
- 	depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -16,6 +16,9 @@ obj-$(CONFIG_NETFILTER_NETLINK_LOG) += n
- # connection tracking
- obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o
- 
-+# optional conntrack route cache extension
-+obj-$(CONFIG_NF_CONNTRACK_RTCACHE) += nf_conntrack_rtcache.o
-+
- # SCTP protocol connection tracking
- obj-$(CONFIG_NF_CT_PROTO_DCCP) += nf_conntrack_proto_dccp.o
- obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o
---- /dev/null
-+++ b/net/netfilter/nf_conntrack_rtcache.c
-@@ -0,0 +1,413 @@
-+/* route cache for netfilter.
-+ *
-+ * (C) 2014 Red Hat GmbH
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/types.h>
-+#include <linux/netfilter.h>
-+#include <linux/skbuff.h>
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/netdevice.h>
-+#include <linux/export.h>
-+#include <linux/module.h>
-+
-+#include <net/dst.h>
-+
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_rtcache.h>
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+#include <net/ip6_fib.h>
-+#endif
-+
-+static void __nf_conn_rtcache_destroy(struct nf_conn_rtcache *rtc,
-+				      enum ip_conntrack_dir dir)
-+{
-+	struct dst_entry *dst = rtc->cached_dst[dir].dst;
-+
-+	dst_release(dst);
-+}
-+
-+static void nf_conn_rtcache_destroy(struct nf_conn *ct)
-+{
-+	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+
-+	if (!rtc)
-+		return;
-+
-+	__nf_conn_rtcache_destroy(rtc, IP_CT_DIR_ORIGINAL);
-+	__nf_conn_rtcache_destroy(rtc, IP_CT_DIR_REPLY);
-+}
-+
-+static void nf_ct_rtcache_ext_add(struct nf_conn *ct)
-+{
-+	struct nf_conn_rtcache *rtc;
-+
-+	rtc = nf_ct_ext_add(ct, NF_CT_EXT_RTCACHE, GFP_ATOMIC);
-+	if (rtc) {
-+		rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif = -1;
-+		rtc->cached_dst[IP_CT_DIR_ORIGINAL].dst = NULL;
-+		rtc->cached_dst[IP_CT_DIR_REPLY].iif = -1;
-+		rtc->cached_dst[IP_CT_DIR_REPLY].dst = NULL;
-+	}
-+}
-+
-+static struct nf_conn_rtcache *nf_ct_rtcache_find_usable(struct nf_conn *ct)
-+{
-+	if (nf_ct_is_untracked(ct))
-+		return NULL;
-+	return nf_ct_rtcache_find(ct);
-+}
-+
-+static struct dst_entry *
-+nf_conn_rtcache_dst_get(const struct nf_conn_rtcache *rtc,
-+			enum ip_conntrack_dir dir)
-+{
-+	return rtc->cached_dst[dir].dst;
-+}
-+
-+static u32 nf_rtcache_get_cookie(int pf, const struct dst_entry *dst)
-+{
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+	if (pf == NFPROTO_IPV6) {
-+		const struct rt6_info *rt = (const struct rt6_info *)dst;
-+
-+		if (rt->rt6i_node)
-+			return (u32)rt->rt6i_node->fn_sernum;
-+	}
-+#endif
-+	return 0;
-+}
-+
-+static void nf_conn_rtcache_dst_set(int pf,
-+				    struct nf_conn_rtcache *rtc,
-+				    struct dst_entry *dst,
-+				    enum ip_conntrack_dir dir, int iif)
-+{
-+	if (rtc->cached_dst[dir].iif != iif)
-+		rtc->cached_dst[dir].iif = iif;
-+
-+	if (rtc->cached_dst[dir].dst != dst) {
-+		struct dst_entry *old;
-+
-+		dst_hold(dst);
-+
-+		old = xchg(&rtc->cached_dst[dir].dst, dst);
-+		dst_release(old);
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+		if (pf == NFPROTO_IPV6)
-+			rtc->cached_dst[dir].cookie =
-+				nf_rtcache_get_cookie(pf, dst);
-+#endif
-+	}
-+}
-+
-+static void nf_conn_rtcache_dst_obsolete(struct nf_conn_rtcache *rtc,
-+					 enum ip_conntrack_dir dir)
-+{
-+	struct dst_entry *old;
-+
-+	pr_debug("Invalidate iif %d for dir %d on cache %p\n",
-+		 rtc->cached_dst[dir].iif, dir, rtc);
-+
-+	old = xchg(&rtc->cached_dst[dir].dst, NULL);
-+	dst_release(old);
-+	rtc->cached_dst[dir].iif = -1;
-+}
-+
-+static unsigned int nf_rtcache_in(u_int8_t pf,
-+				  struct sk_buff *skb,
-+				  const struct nf_hook_state *state)
-+{
-+	struct nf_conn_rtcache *rtc;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	struct dst_entry *dst;
-+	struct nf_conn *ct;
-+	int iif;
-+	u32 cookie;
-+
-+	if (skb_dst(skb) || skb->sk)
-+		return NF_ACCEPT;
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (!ct)
-+		return NF_ACCEPT;
-+
-+	rtc = nf_ct_rtcache_find_usable(ct);
-+	if (!rtc)
-+		return NF_ACCEPT;
-+
-+	/* if iif changes, don't use cache and let ip stack
-+	 * do route lookup.
-+	 *
-+	 * If rp_filter is enabled it might toss skb, so
-+	 * we don't want to avoid these checks.
-+	 */
-+	dir = CTINFO2DIR(ctinfo);
-+	iif = nf_conn_rtcache_iif_get(rtc, dir);
-+	if (state->in->ifindex != iif) {
-+		pr_debug("ct %p, iif %d, cached iif %d, skip cached entry\n",
-+			 ct, iif, state->in->ifindex);
-+		return NF_ACCEPT;
-+	}
-+	dst = nf_conn_rtcache_dst_get(rtc, dir);
-+	if (dst == NULL)
-+		return NF_ACCEPT;
-+
-+	cookie = nf_rtcache_get_cookie(pf, dst);
-+
-+	dst = dst_check(dst, cookie);
-+	pr_debug("obtained dst %p for skb %p, cookie %d\n", dst, skb, cookie);
-+	if (likely(dst))
-+		skb_dst_set_noref(skb, dst);
-+	else
-+		nf_conn_rtcache_dst_obsolete(rtc, dir);
-+
-+	return NF_ACCEPT;
-+}
-+
-+static unsigned int nf_rtcache_forward(u_int8_t pf,
-+				       struct sk_buff *skb,
-+				       const struct nf_hook_state *state)
-+{
-+	struct nf_conn_rtcache *rtc;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	struct nf_conn *ct;
-+	struct dst_entry *dst = skb_dst(skb);
-+	int iif;
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (!ct)
-+		return NF_ACCEPT;
-+
-+	if (dst && dst_xfrm(dst))
-+		return NF_ACCEPT;
-+
-+	if (!nf_ct_is_confirmed(ct)) {
-+		if (WARN_ON(nf_ct_rtcache_find(ct)))
-+			return NF_ACCEPT;
-+		nf_ct_rtcache_ext_add(ct);
-+		return NF_ACCEPT;
-+	}
-+
-+	rtc = nf_ct_rtcache_find_usable(ct);
-+	if (!rtc)
-+		return NF_ACCEPT;
-+
-+	dir = CTINFO2DIR(ctinfo);
-+	iif = nf_conn_rtcache_iif_get(rtc, dir);
-+	pr_debug("ct %p, skb %p, dir %d, iif %d, cached iif %d\n",
-+		 ct, skb, dir, iif, state->in->ifindex);
-+	if (likely(state->in->ifindex == iif))
-+		return NF_ACCEPT;
-+
-+	nf_conn_rtcache_dst_set(pf, rtc, skb_dst(skb), dir, state->in->ifindex);
-+	return NF_ACCEPT;
-+}
-+
-+static unsigned int nf_rtcache_in4(void *priv,
-+				  struct sk_buff *skb,
-+				  const struct nf_hook_state *state)
-+{
-+	return nf_rtcache_in(NFPROTO_IPV4, skb, state);
-+}
-+
-+static unsigned int nf_rtcache_forward4(void *priv,
-+				       struct sk_buff *skb,
-+				       const struct nf_hook_state *state)
-+{
-+	return nf_rtcache_forward(NFPROTO_IPV4, skb, state);
-+}
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+static unsigned int nf_rtcache_in6(void *priv,
-+				  struct sk_buff *skb,
-+				  const struct nf_hook_state *state)
-+{
-+	return nf_rtcache_in(NFPROTO_IPV6, skb, state);
-+}
-+
-+static unsigned int nf_rtcache_forward6(void *priv,
-+				       struct sk_buff *skb,
-+				       const struct nf_hook_state *state)
-+{
-+ 	return nf_rtcache_forward(NFPROTO_IPV6, skb, state);
-+}
-+#endif
-+
-+static int nf_rtcache_dst_remove(struct nf_conn *ct, void *data)
-+{
-+	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+	struct net_device *dev = data;
-+
-+	if (!rtc)
-+		return 0;
-+
-+	if (dev->ifindex == rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif ||
-+	    dev->ifindex == rtc->cached_dst[IP_CT_DIR_REPLY].iif) {
-+		nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_ORIGINAL);
-+		nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_REPLY);
-+	}
-+
-+	return 0;
-+}
-+
-+static int nf_rtcache_netdev_event(struct notifier_block *this,
-+				   unsigned long event, void *ptr)
-+{
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+	struct net *net = dev_net(dev);
-+
-+	if (event == NETDEV_DOWN)
-+		nf_ct_iterate_cleanup(net, nf_rtcache_dst_remove, dev, 0, 0);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nf_rtcache_notifier = {
-+	.notifier_call = nf_rtcache_netdev_event,
-+};
-+
-+static struct nf_hook_ops rtcache_ops[] = {
-+	{
-+		.hook		= nf_rtcache_in4,
-+		.pf		= NFPROTO_IPV4,
-+		.hooknum	= NF_INET_PRE_ROUTING,
-+		.priority       = NF_IP_PRI_LAST,
-+	},
-+	{
-+		.hook           = nf_rtcache_forward4,
-+		.pf             = NFPROTO_IPV4,
-+		.hooknum        = NF_INET_FORWARD,
-+		.priority       = NF_IP_PRI_LAST,
-+	},
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+	{
-+		.hook		= nf_rtcache_in6,
-+		.pf		= NFPROTO_IPV6,
-+		.hooknum	= NF_INET_PRE_ROUTING,
-+		.priority       = NF_IP_PRI_LAST,
-+	},
-+	{
-+		.hook           = nf_rtcache_forward6,
-+		.pf             = NFPROTO_IPV6,
-+		.hooknum        = NF_INET_FORWARD,
-+		.priority       = NF_IP_PRI_LAST,
-+	},
-+#endif
-+};
-+
-+static struct nf_ct_ext_type rtcache_extend __read_mostly = {
-+	.len	= sizeof(struct nf_conn_rtcache),
-+	.align	= __alignof__(struct nf_conn_rtcache),
-+	.id	= NF_CT_EXT_RTCACHE,
-+	.destroy = nf_conn_rtcache_destroy,
-+};
-+
-+static int __init nf_conntrack_rtcache_init(void)
-+{
-+	int ret = nf_ct_extend_register(&rtcache_extend);
-+
-+	if (ret < 0) {
-+		pr_err("nf_conntrack_rtcache: Unable to register extension\n");
-+		return ret;
-+	}
-+
-+	ret = nf_register_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+	if (ret < 0) {
-+		nf_ct_extend_unregister(&rtcache_extend);
-+		return ret;
-+	}
-+
-+	ret = register_netdevice_notifier(&nf_rtcache_notifier);
-+	if (ret) {
-+		nf_unregister_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+		nf_ct_extend_unregister(&rtcache_extend);
-+	}
-+
-+	return ret;
-+}
-+
-+static int nf_rtcache_ext_remove(struct nf_conn *ct, void *data)
-+{
-+	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+
-+	return rtc != NULL;
-+}
-+
-+static bool __exit nf_conntrack_rtcache_wait_for_dying(struct net *net)
-+{
-+	bool wait = false;
-+	int cpu;
-+
-+	for_each_possible_cpu(cpu) {
-+		struct nf_conntrack_tuple_hash *h;
-+		struct hlist_nulls_node *n;
-+		struct nf_conn *ct;
-+		struct ct_pcpu *pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu);
-+
-+		rcu_read_lock();
-+		spin_lock_bh(&pcpu->lock);
-+
-+		hlist_nulls_for_each_entry(h, n, &pcpu->dying, hnnode) {
-+			ct = nf_ct_tuplehash_to_ctrack(h);
-+			if (nf_ct_rtcache_find(ct) != NULL) {
-+				wait = true;
-+				break;
-+			}
-+		}
-+		spin_unlock_bh(&pcpu->lock);
-+		rcu_read_unlock();
-+	}
-+
-+	return wait;
-+}
-+
-+static void __exit nf_conntrack_rtcache_fini(void)
-+{
-+	struct net *net;
-+	int count = 0;
-+
-+	/* remove hooks so no new connections get rtcache extension */
-+	nf_unregister_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+
-+	synchronize_net();
-+
-+	unregister_netdevice_notifier(&nf_rtcache_notifier);
-+
-+	rtnl_lock();
-+
-+	/* zap all conntracks with rtcache extension */
-+	for_each_net(net)
-+		nf_ct_iterate_cleanup(net, nf_rtcache_ext_remove, NULL, 0, 0);
-+
-+	for_each_net(net) {
-+		/* .. and make sure they're gone from dying list, too */
-+		while (nf_conntrack_rtcache_wait_for_dying(net)) {
-+			msleep(200);
-+			WARN_ONCE(++count > 25, "Waiting for all rtcache conntracks to go away\n");
-+		}
-+	}
-+
-+	rtnl_unlock();
-+	synchronize_net();
-+	nf_ct_extend_unregister(&rtcache_extend);
-+}
-+module_init(nf_conntrack_rtcache_init);
-+module_exit(nf_conntrack_rtcache_fini);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Florian Westphal <fw@strlen.de>");
-+MODULE_DESCRIPTION("Conntrack route cache extension");
diff --git a/target/linux/generic/backport-4.9/021-bridge-multicast-to-unicast.patch b/target/linux/generic/backport-4.9/021-bridge-multicast-to-unicast.patch
deleted file mode 100644
index 1d3ce28128..0000000000
--- a/target/linux/generic/backport-4.9/021-bridge-multicast-to-unicast.patch
+++ /dev/null
@@ -1,499 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 19 Jan 2017 03:45:10 +0100
-Subject: [PATCH] bridge: multicast to unicast
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Implements an optional, per bridge port flag and feature to deliver
-multicast packets to any host on the according port via unicast
-individually. This is done by copying the packet per host and
-changing the multicast destination MAC to a unicast one accordingly.
-
-multicast-to-unicast works on top of the multicast snooping feature of
-the bridge. Which means unicast copies are only delivered to hosts which
-are interested in it and signalized this via IGMP/MLD reports
-previously.
-
-This feature is intended for interface types which have a more reliable
-and/or efficient way to deliver unicast packets than broadcast ones
-(e.g. wifi).
-
-However, it should only be enabled on interfaces where no IGMPv2/MLDv1
-report suppression takes place. This feature is disabled by default.
-
-The initial patch and idea is from Felix Fietkau.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-[linus.luessing@c0d3.blue: various bug + style fixes, commit message]
-Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
----
-
---- a/include/linux/if_bridge.h
-+++ b/include/linux/if_bridge.h
-@@ -46,6 +46,7 @@ struct br_ip_list {
- #define BR_LEARNING_SYNC	BIT(9)
- #define BR_PROXYARP_WIFI	BIT(10)
- #define BR_MCAST_FLOOD		BIT(11)
-+#define BR_MULTICAST_TO_UNICAST	BIT(12)
- 
- #define BR_DEFAULT_AGEING_TIME	(300 * HZ)
- 
---- a/include/uapi/linux/if_link.h
-+++ b/include/uapi/linux/if_link.h
-@@ -319,6 +319,7 @@ enum {
- 	IFLA_BRPORT_MULTICAST_ROUTER,
- 	IFLA_BRPORT_PAD,
- 	IFLA_BRPORT_MCAST_FLOOD,
-+	IFLA_BRPORT_MCAST_TO_UCAST,
- 	__IFLA_BRPORT_MAX
- };
- #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -173,6 +173,29 @@ out:
- 	return p;
- }
- 
-+static void maybe_deliver_addr(struct net_bridge_port *p, struct sk_buff *skb,
-+			       const unsigned char *addr, bool local_orig)
-+{
-+	struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
-+	const unsigned char *src = eth_hdr(skb)->h_source;
-+
-+	if (!should_deliver(p, skb))
-+		return;
-+
-+	/* Even with hairpin, no soliloquies - prevent breaking IPv6 DAD */
-+	if (skb->dev == p->dev && ether_addr_equal(src, addr))
-+		return;
-+
-+	skb = skb_copy(skb, GFP_ATOMIC);
-+	if (!skb) {
-+		dev->stats.tx_dropped++;
-+		return;
-+	}
-+
-+	memcpy(eth_hdr(skb)->h_dest, addr, ETH_ALEN);
-+	__br_forward(p, skb, local_orig);
-+}
-+
- /* called under rcu_read_lock */
- void br_flood(struct net_bridge *br, struct sk_buff *skb,
- 	      enum br_pkt_type pkt_type, bool local_rcv, bool local_orig)
-@@ -241,10 +264,20 @@ void br_multicast_flood(struct net_bridg
- 		rport = rp ? hlist_entry(rp, struct net_bridge_port, rlist) :
- 			     NULL;
- 
--		port = (unsigned long)lport > (unsigned long)rport ?
--		       lport : rport;
-+		if ((unsigned long)lport > (unsigned long)rport) {
-+			port = lport;
-+
-+			if (p->flags & MDB_PG_FLAGS_MCAST_TO_UCAST) {
-+				maybe_deliver_addr(lport, skb, p->eth_addr,
-+						   local_orig);
-+				goto delivered;
-+			}
-+		} else {
-+			port = rport;
-+		}
- 
- 		prev = maybe_deliver(prev, port, skb, local_orig);
-+delivered:
- 		if (IS_ERR(prev))
- 			goto out;
- 		if (prev == port)
---- a/net/bridge/br_mdb.c
-+++ b/net/bridge/br_mdb.c
-@@ -532,7 +532,7 @@ static int br_mdb_add_group(struct net_b
- 			break;
- 	}
- 
--	p = br_multicast_new_port_group(port, group, *pp, state);
-+	p = br_multicast_new_port_group(port, group, *pp, state, NULL);
- 	if (unlikely(!p))
- 		return -ENOMEM;
- 	rcu_assign_pointer(*pp, p);
---- a/net/bridge/br_multicast.c
-+++ b/net/bridge/br_multicast.c
-@@ -42,12 +42,14 @@ static void br_multicast_add_router(stru
- static void br_ip4_multicast_leave_group(struct net_bridge *br,
- 					 struct net_bridge_port *port,
- 					 __be32 group,
--					 __u16 vid);
-+					 __u16 vid,
-+					 const unsigned char *src);
-+
- #if IS_ENABLED(CONFIG_IPV6)
- static void br_ip6_multicast_leave_group(struct net_bridge *br,
- 					 struct net_bridge_port *port,
- 					 const struct in6_addr *group,
--					 __u16 vid);
-+					 __u16 vid, const unsigned char *src);
- #endif
- unsigned int br_mdb_rehash_seq;
- 
-@@ -658,7 +660,8 @@ struct net_bridge_port_group *br_multica
- 			struct net_bridge_port *port,
- 			struct br_ip *group,
- 			struct net_bridge_port_group __rcu *next,
--			unsigned char flags)
-+			unsigned char flags,
-+			const unsigned char *src)
- {
- 	struct net_bridge_port_group *p;
- 
-@@ -673,12 +676,39 @@ struct net_bridge_port_group *br_multica
- 	hlist_add_head(&p->mglist, &port->mglist);
- 	setup_timer(&p->timer, br_multicast_port_group_expired,
- 		    (unsigned long)p);
-+
-+	if ((port->flags & BR_MULTICAST_TO_UNICAST) && src) {
-+		memcpy(p->eth_addr, src, ETH_ALEN);
-+		p->flags |= MDB_PG_FLAGS_MCAST_TO_UCAST;
-+	}
-+
- 	return p;
- }
- 
-+static bool br_port_group_equal(struct net_bridge_port_group *p,
-+				struct net_bridge_port *port,
-+				const unsigned char *src)
-+{
-+	if (p->port != port)
-+		return false;
-+
-+	if (!(p->flags & MDB_PG_FLAGS_MCAST_TO_UCAST) !=
-+	    !(port->flags & BR_MULTICAST_TO_UNICAST))
-+		return false;
-+
-+	if (!(p->flags & MDB_PG_FLAGS_MCAST_TO_UCAST))
-+		return true;
-+
-+	if (!src)
-+		return false;
-+
-+	return ether_addr_equal(src, p->eth_addr);
-+}
-+
- static int br_multicast_add_group(struct net_bridge *br,
- 				  struct net_bridge_port *port,
--				  struct br_ip *group)
-+				  struct br_ip *group,
-+				  const unsigned char *src)
- {
- 	struct net_bridge_mdb_entry *mp;
- 	struct net_bridge_port_group *p;
-@@ -705,13 +735,13 @@ static int br_multicast_add_group(struct
- 	for (pp = &mp->ports;
- 	     (p = mlock_dereference(*pp, br)) != NULL;
- 	     pp = &p->next) {
--		if (p->port == port)
-+		if (br_port_group_equal(p, port, src))
- 			goto found;
- 		if ((unsigned long)p->port < (unsigned long)port)
- 			break;
- 	}
- 
--	p = br_multicast_new_port_group(port, group, *pp, 0);
-+	p = br_multicast_new_port_group(port, group, *pp, 0, src);
- 	if (unlikely(!p))
- 		goto err;
- 	rcu_assign_pointer(*pp, p);
-@@ -730,7 +760,8 @@ err:
- static int br_ip4_multicast_add_group(struct net_bridge *br,
- 				      struct net_bridge_port *port,
- 				      __be32 group,
--				      __u16 vid)
-+				      __u16 vid,
-+				      const unsigned char *src)
- {
- 	struct br_ip br_group;
- 
-@@ -741,14 +772,15 @@ static int br_ip4_multicast_add_group(st
- 	br_group.proto = htons(ETH_P_IP);
- 	br_group.vid = vid;
- 
--	return br_multicast_add_group(br, port, &br_group);
-+	return br_multicast_add_group(br, port, &br_group, src);
- }
- 
- #if IS_ENABLED(CONFIG_IPV6)
- static int br_ip6_multicast_add_group(struct net_bridge *br,
- 				      struct net_bridge_port *port,
- 				      const struct in6_addr *group,
--				      __u16 vid)
-+				      __u16 vid,
-+				      const unsigned char *src)
- {
- 	struct br_ip br_group;
- 
-@@ -759,7 +791,7 @@ static int br_ip6_multicast_add_group(st
- 	br_group.proto = htons(ETH_P_IPV6);
- 	br_group.vid = vid;
- 
--	return br_multicast_add_group(br, port, &br_group);
-+	return br_multicast_add_group(br, port, &br_group, src);
- }
- #endif
- 
-@@ -1028,6 +1060,7 @@ static int br_ip4_multicast_igmp3_report
- 					 struct sk_buff *skb,
- 					 u16 vid)
- {
-+	const unsigned char *src;
- 	struct igmpv3_report *ih;
- 	struct igmpv3_grec *grec;
- 	int i;
-@@ -1068,12 +1101,14 @@ static int br_ip4_multicast_igmp3_report
- 			continue;
- 		}
- 
-+		src = eth_hdr(skb)->h_source;
- 		if ((type == IGMPV3_CHANGE_TO_INCLUDE ||
- 		     type == IGMPV3_MODE_IS_INCLUDE) &&
- 		    ntohs(grec->grec_nsrcs) == 0) {
--			br_ip4_multicast_leave_group(br, port, group, vid);
-+			br_ip4_multicast_leave_group(br, port, group, vid, src);
- 		} else {
--			err = br_ip4_multicast_add_group(br, port, group, vid);
-+			err = br_ip4_multicast_add_group(br, port, group, vid,
-+							 src);
- 			if (err)
- 				break;
- 		}
-@@ -1088,6 +1123,7 @@ static int br_ip6_multicast_mld2_report(
- 					struct sk_buff *skb,
- 					u16 vid)
- {
-+	const unsigned char *src = eth_hdr(skb)->h_source;
- 	struct icmp6hdr *icmp6h;
- 	struct mld2_grec *grec;
- 	int i;
-@@ -1139,10 +1175,11 @@ static int br_ip6_multicast_mld2_report(
- 		     grec->grec_type == MLD2_MODE_IS_INCLUDE) &&
- 		    ntohs(*nsrcs) == 0) {
- 			br_ip6_multicast_leave_group(br, port, &grec->grec_mca,
--						     vid);
-+						     vid, src);
- 		} else {
- 			err = br_ip6_multicast_add_group(br, port,
--							 &grec->grec_mca, vid);
-+							 &grec->grec_mca, vid,
-+							 src);
- 			if (err)
- 				break;
- 		}
-@@ -1458,7 +1495,8 @@ br_multicast_leave_group(struct net_brid
- 			 struct net_bridge_port *port,
- 			 struct br_ip *group,
- 			 struct bridge_mcast_other_query *other_query,
--			 struct bridge_mcast_own_query *own_query)
-+			 struct bridge_mcast_own_query *own_query,
-+			 const unsigned char *src)
- {
- 	struct net_bridge_mdb_htable *mdb;
- 	struct net_bridge_mdb_entry *mp;
-@@ -1482,7 +1520,7 @@ br_multicast_leave_group(struct net_brid
- 		for (pp = &mp->ports;
- 		     (p = mlock_dereference(*pp, br)) != NULL;
- 		     pp = &p->next) {
--			if (p->port != port)
-+			if (!br_port_group_equal(p, port, src))
- 				continue;
- 
- 			rcu_assign_pointer(*pp, p->next);
-@@ -1513,7 +1551,7 @@ br_multicast_leave_group(struct net_brid
- 		for (p = mlock_dereference(mp->ports, br);
- 		     p != NULL;
- 		     p = mlock_dereference(p->next, br)) {
--			if (p->port != port)
-+			if (!br_port_group_equal(p, port, src))
- 				continue;
- 
- 			if (!hlist_unhashed(&p->mglist) &&
-@@ -1564,7 +1602,8 @@ out:
- static void br_ip4_multicast_leave_group(struct net_bridge *br,
- 					 struct net_bridge_port *port,
- 					 __be32 group,
--					 __u16 vid)
-+					 __u16 vid,
-+					 const unsigned char *src)
- {
- 	struct br_ip br_group;
- 	struct bridge_mcast_own_query *own_query;
-@@ -1579,14 +1618,15 @@ static void br_ip4_multicast_leave_group
- 	br_group.vid = vid;
- 
- 	br_multicast_leave_group(br, port, &br_group, &br->ip4_other_query,
--				 own_query);
-+				 own_query, src);
- }
- 
- #if IS_ENABLED(CONFIG_IPV6)
- static void br_ip6_multicast_leave_group(struct net_bridge *br,
- 					 struct net_bridge_port *port,
- 					 const struct in6_addr *group,
--					 __u16 vid)
-+					 __u16 vid,
-+					 const unsigned char *src)
- {
- 	struct br_ip br_group;
- 	struct bridge_mcast_own_query *own_query;
-@@ -1601,7 +1641,7 @@ static void br_ip6_multicast_leave_group
- 	br_group.vid = vid;
- 
- 	br_multicast_leave_group(br, port, &br_group, &br->ip6_other_query,
--				 own_query);
-+				 own_query, src);
- }
- #endif
- 
-@@ -1644,6 +1684,7 @@ static int br_multicast_ipv4_rcv(struct
- 				 u16 vid)
- {
- 	struct sk_buff *skb_trimmed = NULL;
-+	const unsigned char *src;
- 	struct igmphdr *ih;
- 	int err;
- 
-@@ -1659,13 +1700,14 @@ static int br_multicast_ipv4_rcv(struct
- 	}
- 
- 	ih = igmp_hdr(skb);
-+	src = eth_hdr(skb)->h_source;
- 	BR_INPUT_SKB_CB(skb)->igmp = ih->type;
- 
- 	switch (ih->type) {
- 	case IGMP_HOST_MEMBERSHIP_REPORT:
- 	case IGMPV2_HOST_MEMBERSHIP_REPORT:
- 		BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
--		err = br_ip4_multicast_add_group(br, port, ih->group, vid);
-+		err = br_ip4_multicast_add_group(br, port, ih->group, vid, src);
- 		break;
- 	case IGMPV3_HOST_MEMBERSHIP_REPORT:
- 		err = br_ip4_multicast_igmp3_report(br, port, skb_trimmed, vid);
-@@ -1674,7 +1716,7 @@ static int br_multicast_ipv4_rcv(struct
- 		err = br_ip4_multicast_query(br, port, skb_trimmed, vid);
- 		break;
- 	case IGMP_HOST_LEAVE_MESSAGE:
--		br_ip4_multicast_leave_group(br, port, ih->group, vid);
-+		br_ip4_multicast_leave_group(br, port, ih->group, vid, src);
- 		break;
- 	}
- 
-@@ -1694,6 +1736,7 @@ static int br_multicast_ipv6_rcv(struct
- 				 u16 vid)
- {
- 	struct sk_buff *skb_trimmed = NULL;
-+	const unsigned char *src;
- 	struct mld_msg *mld;
- 	int err;
- 
-@@ -1713,8 +1756,10 @@ static int br_multicast_ipv6_rcv(struct
- 
- 	switch (mld->mld_type) {
- 	case ICMPV6_MGM_REPORT:
-+		src = eth_hdr(skb)->h_source;
- 		BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
--		err = br_ip6_multicast_add_group(br, port, &mld->mld_mca, vid);
-+		err = br_ip6_multicast_add_group(br, port, &mld->mld_mca, vid,
-+						 src);
- 		break;
- 	case ICMPV6_MLD2_REPORT:
- 		err = br_ip6_multicast_mld2_report(br, port, skb_trimmed, vid);
-@@ -1723,7 +1768,8 @@ static int br_multicast_ipv6_rcv(struct
- 		err = br_ip6_multicast_query(br, port, skb_trimmed, vid);
- 		break;
- 	case ICMPV6_MGM_REDUCTION:
--		br_ip6_multicast_leave_group(br, port, &mld->mld_mca, vid);
-+		src = eth_hdr(skb)->h_source;
-+		br_ip6_multicast_leave_group(br, port, &mld->mld_mca, vid, src);
- 		break;
- 	}
- 
---- a/net/bridge/br_netlink.c
-+++ b/net/bridge/br_netlink.c
-@@ -123,6 +123,7 @@ static inline size_t br_port_info_size(v
- 		+ nla_total_size(1)	/* IFLA_BRPORT_GUARD */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_PROTECT */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_FAST_LEAVE */
-+		+ nla_total_size(1)	/* IFLA_BRPORT_MCAST_TO_UCAST */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_LEARNING */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_UNICAST_FLOOD */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_PROXYARP */
-@@ -173,6 +174,8 @@ static int br_port_fill_attrs(struct sk_
- 		       !!(p->flags & BR_ROOT_BLOCK)) ||
- 	    nla_put_u8(skb, IFLA_BRPORT_FAST_LEAVE,
- 		       !!(p->flags & BR_MULTICAST_FAST_LEAVE)) ||
-+	    nla_put_u8(skb, IFLA_BRPORT_MCAST_TO_UCAST,
-+		       !!(p->flags & BR_MULTICAST_TO_UNICAST)) ||
- 	    nla_put_u8(skb, IFLA_BRPORT_LEARNING, !!(p->flags & BR_LEARNING)) ||
- 	    nla_put_u8(skb, IFLA_BRPORT_UNICAST_FLOOD,
- 		       !!(p->flags & BR_FLOOD)) ||
-@@ -586,6 +589,7 @@ static const struct nla_policy br_port_p
- 	[IFLA_BRPORT_PROXYARP]	= { .type = NLA_U8 },
- 	[IFLA_BRPORT_PROXYARP_WIFI] = { .type = NLA_U8 },
- 	[IFLA_BRPORT_MULTICAST_ROUTER] = { .type = NLA_U8 },
-+	[IFLA_BRPORT_MCAST_TO_UCAST] = { .type = NLA_U8 },
- };
- 
- /* Change the state of the port and notify spanning tree */
-@@ -636,6 +640,7 @@ static int br_setport(struct net_bridge_
- 	br_set_port_flag(p, tb, IFLA_BRPORT_LEARNING, BR_LEARNING);
- 	br_set_port_flag(p, tb, IFLA_BRPORT_UNICAST_FLOOD, BR_FLOOD);
- 	br_set_port_flag(p, tb, IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD);
-+	br_set_port_flag(p, tb, IFLA_BRPORT_MCAST_TO_UCAST, BR_MULTICAST_TO_UNICAST);
- 	br_set_port_flag(p, tb, IFLA_BRPORT_PROXYARP, BR_PROXYARP);
- 	br_set_port_flag(p, tb, IFLA_BRPORT_PROXYARP_WIFI, BR_PROXYARP_WIFI);
- 
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -166,8 +166,9 @@ struct net_bridge_fdb_entry
- 	struct rcu_head			rcu;
- };
- 
--#define MDB_PG_FLAGS_PERMANENT	BIT(0)
--#define MDB_PG_FLAGS_OFFLOAD	BIT(1)
-+#define MDB_PG_FLAGS_PERMANENT		BIT(0)
-+#define MDB_PG_FLAGS_OFFLOAD		BIT(1)
-+#define MDB_PG_FLAGS_MCAST_TO_UCAST	BIT(2)
- 
- struct net_bridge_port_group {
- 	struct net_bridge_port		*port;
-@@ -177,6 +178,7 @@ struct net_bridge_port_group {
- 	struct timer_list		timer;
- 	struct br_ip			addr;
- 	unsigned char			flags;
-+	unsigned char			eth_addr[ETH_ALEN];
- };
- 
- struct net_bridge_mdb_entry
-@@ -591,7 +593,7 @@ void br_multicast_free_pg(struct rcu_hea
- struct net_bridge_port_group *
- br_multicast_new_port_group(struct net_bridge_port *port, struct br_ip *group,
- 			    struct net_bridge_port_group __rcu *next,
--			    unsigned char flags);
-+			    unsigned char flags, const unsigned char *src);
- void br_mdb_init(void);
- void br_mdb_uninit(void);
- void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
---- a/net/bridge/br_sysfs_if.c
-+++ b/net/bridge/br_sysfs_if.c
-@@ -188,6 +188,7 @@ static BRPORT_ATTR(multicast_router, S_I
- 		   store_multicast_router);
- 
- BRPORT_ATTR_FLAG(multicast_fast_leave, BR_MULTICAST_FAST_LEAVE);
-+BRPORT_ATTR_FLAG(multicast_to_unicast, BR_MULTICAST_TO_UNICAST);
- #endif
- 
- static const struct brport_attribute *brport_attrs[] = {
-@@ -214,6 +215,7 @@ static const struct brport_attribute *br
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- 	&brport_attr_multicast_router,
- 	&brport_attr_multicast_fast_leave,
-+	&brport_attr_multicast_to_unicast,
- #endif
- 	&brport_attr_proxyarp,
- 	&brport_attr_proxyarp_wifi,
diff --git a/target/linux/generic/backport-4.9/022-net-add-devm-version-of-alloc_etherdev_mqs-function.patch b/target/linux/generic/backport-4.9/022-net-add-devm-version-of-alloc_etherdev_mqs-function.patch
deleted file mode 100644
index c5d65b7105..0000000000
--- a/target/linux/generic/backport-4.9/022-net-add-devm-version-of-alloc_etherdev_mqs-function.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 28 Jan 2017 15:15:42 +0100
-Subject: [PATCH] net: add devm version of alloc_etherdev_mqs function
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds devm_alloc_etherdev_mqs function and devm_alloc_etherdev
-macro. These can be used for simpler netdev allocation without having to
-care about calling free_netdev.
-
-Thanks to this change drivers, their error paths and removal paths may
-get simpler by a bit.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -54,6 +54,11 @@ struct net_device *alloc_etherdev_mqs(in
- #define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1)
- #define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count)
- 
-+struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
-+					   unsigned int txqs,
-+					   unsigned int rxqs);
-+#define devm_alloc_etherdev(dev, sizeof_priv) devm_alloc_etherdev_mqs(dev, sizeof_priv, 1, 1)
-+
- struct sk_buff **eth_gro_receive(struct sk_buff **head,
- 				 struct sk_buff *skb);
- int eth_gro_complete(struct sk_buff *skb, int nhoff);
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -391,6 +391,34 @@ struct net_device *alloc_etherdev_mqs(in
- }
- EXPORT_SYMBOL(alloc_etherdev_mqs);
- 
-+static void devm_free_netdev(struct device *dev, void *res)
-+{
-+	free_netdev(*(struct net_device **)res);
-+}
-+
-+struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
-+					   unsigned int txqs, unsigned int rxqs)
-+{
-+	struct net_device **dr;
-+	struct net_device *netdev;
-+
-+	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
-+	if (!dr)
-+		return NULL;
-+
-+	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
-+	if (!netdev) {
-+		devres_free(dr);
-+		return NULL;
-+	}
-+
-+	*dr = netdev;
-+	devres_add(dev, dr);
-+
-+	return netdev;
-+}
-+EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
-+
- ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len)
- {
- 	return scnprintf(buf, PAGE_SIZE, "%*phC\n", len, addr);
diff --git a/target/linux/generic/backport-4.9/024-1-tcp-tsq-add-tsq_flags-tsq_enum.patch b/target/linux/generic/backport-4.9/024-1-tcp-tsq-add-tsq_flags-tsq_enum.patch
deleted file mode 100644
index 172e714c5d..0000000000
--- a/target/linux/generic/backport-4.9/024-1-tcp-tsq-add-tsq_flags-tsq_enum.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 40fc3423b983b864bf70b03199191260ae9b2ea6 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 3 Dec 2016 11:14:50 -0800
-Subject: [PATCH 01/10] tcp: tsq: add tsq_flags / tsq_enum
-
-This is a cleanup, to ease code review of following patches.
-
-Old 'enum tsq_flags' is renamed, and a new enumeration is added
-with the flags used in cmpxchg() operations as opposed to
-single bit operations.
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/tcp.h   | 11 ++++++++++-
- net/ipv4/tcp_output.c | 16 ++++++++--------
- 2 files changed, 18 insertions(+), 9 deletions(-)
-
---- a/include/linux/tcp.h
-+++ b/include/linux/tcp.h
-@@ -368,7 +368,7 @@ struct tcp_sock {
- 	u32	*saved_syn;
- };
- 
--enum tsq_flags {
-+enum tsq_enum {
- 	TSQ_THROTTLED,
- 	TSQ_QUEUED,
- 	TCP_TSQ_DEFERRED,	   /* tcp_tasklet_func() found socket was owned */
-@@ -379,6 +379,15 @@ enum tsq_flags {
- 				    */
- };
- 
-+enum tsq_flags {
-+	TSQF_THROTTLED			= (1UL << TSQ_THROTTLED),
-+	TSQF_QUEUED			= (1UL << TSQ_QUEUED),
-+	TCPF_TSQ_DEFERRED		= (1UL << TCP_TSQ_DEFERRED),
-+	TCPF_WRITE_TIMER_DEFERRED	= (1UL << TCP_WRITE_TIMER_DEFERRED),
-+	TCPF_DELACK_TIMER_DEFERRED	= (1UL << TCP_DELACK_TIMER_DEFERRED),
-+	TCPF_MTU_REDUCED_DEFERRED	= (1UL << TCP_MTU_REDUCED_DEFERRED),
-+};
-+
- static inline struct tcp_sock *tcp_sk(const struct sock *sk)
- {
- 	return (struct tcp_sock *)sk;
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -789,10 +789,10 @@ static void tcp_tasklet_func(unsigned lo
- 	}
- }
- 
--#define TCP_DEFERRED_ALL ((1UL << TCP_TSQ_DEFERRED) |		\
--			  (1UL << TCP_WRITE_TIMER_DEFERRED) |	\
--			  (1UL << TCP_DELACK_TIMER_DEFERRED) |	\
--			  (1UL << TCP_MTU_REDUCED_DEFERRED))
-+#define TCP_DEFERRED_ALL (TCPF_TSQ_DEFERRED |		\
-+			  TCPF_WRITE_TIMER_DEFERRED |	\
-+			  TCPF_DELACK_TIMER_DEFERRED |	\
-+			  TCPF_MTU_REDUCED_DEFERRED)
- /**
-  * tcp_release_cb - tcp release_sock() callback
-  * @sk: socket
-@@ -813,7 +813,7 @@ void tcp_release_cb(struct sock *sk)
- 		nflags = flags & ~TCP_DEFERRED_ALL;
- 	} while (cmpxchg(&tp->tsq_flags, flags, nflags) != flags);
- 
--	if (flags & (1UL << TCP_TSQ_DEFERRED))
-+	if (flags & TCPF_TSQ_DEFERRED)
- 		tcp_tsq_handler(sk);
- 
- 	/* Here begins the tricky part :
-@@ -827,15 +827,15 @@ void tcp_release_cb(struct sock *sk)
- 	 */
- 	sock_release_ownership(sk);
- 
--	if (flags & (1UL << TCP_WRITE_TIMER_DEFERRED)) {
-+	if (flags & TCPF_WRITE_TIMER_DEFERRED) {
- 		tcp_write_timer_handler(sk);
- 		__sock_put(sk);
- 	}
--	if (flags & (1UL << TCP_DELACK_TIMER_DEFERRED)) {
-+	if (flags & TCPF_DELACK_TIMER_DEFERRED) {
- 		tcp_delack_timer_handler(sk);
- 		__sock_put(sk);
- 	}
--	if (flags & (1UL << TCP_MTU_REDUCED_DEFERRED)) {
-+	if (flags & TCPF_MTU_REDUCED_DEFERRED) {
- 		inet_csk(sk)->icsk_af_ops->mtu_reduced(sk);
- 		__sock_put(sk);
- 	}
diff --git a/target/linux/generic/backport-4.9/024-2-tcp-tsq-remove-one-locked-operation-in-tcp_wfree.patch b/target/linux/generic/backport-4.9/024-2-tcp-tsq-remove-one-locked-operation-in-tcp_wfree.patch
deleted file mode 100644
index af194b2bed..0000000000
--- a/target/linux/generic/backport-4.9/024-2-tcp-tsq-remove-one-locked-operation-in-tcp_wfree.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 408f0a6c21e124cc4f6c7aa370b38aa47e55428d Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 3 Dec 2016 11:14:51 -0800
-Subject: [PATCH 02/10] tcp: tsq: remove one locked operation in tcp_wfree()
-
-Instead of atomically clear TSQ_THROTTLED and atomically set TSQ_QUEUED
-bits, use one cmpxchg() to perform a single locked operation.
-
-Since the following patch will also set TCP_TSQ_DEFERRED here,
-this cmpxchg() will make this addition free.
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv4/tcp_output.c | 13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -865,6 +865,7 @@ void tcp_wfree(struct sk_buff *skb)
- {
- 	struct sock *sk = skb->sk;
- 	struct tcp_sock *tp = tcp_sk(sk);
-+	unsigned long flags, nval, oval;
- 	int wmem;
- 
- 	/* Keep one reference on sk_wmem_alloc.
-@@ -882,11 +883,17 @@ void tcp_wfree(struct sk_buff *skb)
- 	if (wmem >= SKB_TRUESIZE(1) && this_cpu_ksoftirqd() == current)
- 		goto out;
- 
--	if (test_and_clear_bit(TSQ_THROTTLED, &tp->tsq_flags) &&
--	    !test_and_set_bit(TSQ_QUEUED, &tp->tsq_flags)) {
--		unsigned long flags;
-+	for (oval = READ_ONCE(tp->tsq_flags);; oval = nval) {
- 		struct tsq_tasklet *tsq;
- 
-+		if (!(oval & TSQF_THROTTLED) || (oval & TSQF_QUEUED))
-+			goto out;
-+
-+		nval = (oval & ~TSQF_THROTTLED) | TSQF_QUEUED;
-+		nval = cmpxchg(&tp->tsq_flags, oval, nval);
-+		if (nval != oval)
-+			continue;
-+
- 		/* queue this socket to tasklet queue */
- 		local_irq_save(flags);
- 		tsq = this_cpu_ptr(&tsq_tasklet);
diff --git a/target/linux/generic/backport-4.9/024-3-tcp-tsq-add-shortcut-in-tcp_tasklet_func.patch b/target/linux/generic/backport-4.9/024-3-tcp-tsq-add-shortcut-in-tcp_tasklet_func.patch
deleted file mode 100644
index b9b3c55076..0000000000
--- a/target/linux/generic/backport-4.9/024-3-tcp-tsq-add-shortcut-in-tcp_tasklet_func.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From b223feb9de2a65c533ff95c08e834fa732906ea5 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 3 Dec 2016 11:14:52 -0800
-Subject: [PATCH 03/10] tcp: tsq: add shortcut in tcp_tasklet_func()
-
-Under high stress, I've seen tcp_tasklet_func() consuming
-~700 usec, handling ~150 tcp sockets.
-
-By setting TCP_TSQ_DEFERRED in tcp_wfree(), we give a chance
-for other cpus/threads entering tcp_write_xmit() to grab it,
-allowing tcp_tasklet_func() to skip sockets that already did
-an xmit cycle.
-
-In the future, we might give to ACK processing an increased
-budget to reduce even more tcp_tasklet_func() amount of work.
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv4/tcp_output.c | 22 ++++++++++++----------
- 1 file changed, 12 insertions(+), 10 deletions(-)
-
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -772,19 +772,19 @@ static void tcp_tasklet_func(unsigned lo
- 	list_for_each_safe(q, n, &list) {
- 		tp = list_entry(q, struct tcp_sock, tsq_node);
- 		list_del(&tp->tsq_node);
-+		clear_bit(TSQ_QUEUED, &tp->tsq_flags);
- 
- 		sk = (struct sock *)tp;
--		bh_lock_sock(sk);
--
--		if (!sock_owned_by_user(sk)) {
--			tcp_tsq_handler(sk);
--		} else {
--			/* defer the work to tcp_release_cb() */
--			set_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags);
-+		if (!sk->sk_lock.owned &&
-+		    test_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags)) {
-+			bh_lock_sock(sk);
-+			if (!sock_owned_by_user(sk)) {
-+				clear_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags);
-+				tcp_tsq_handler(sk);
-+			}
-+			bh_unlock_sock(sk);
- 		}
--		bh_unlock_sock(sk);
- 
--		clear_bit(TSQ_QUEUED, &tp->tsq_flags);
- 		sk_free(sk);
- 	}
- }
-@@ -889,7 +889,7 @@ void tcp_wfree(struct sk_buff *skb)
- 		if (!(oval & TSQF_THROTTLED) || (oval & TSQF_QUEUED))
- 			goto out;
- 
--		nval = (oval & ~TSQF_THROTTLED) | TSQF_QUEUED;
-+		nval = (oval & ~TSQF_THROTTLED) | TSQF_QUEUED | TCPF_TSQ_DEFERRED;
- 		nval = cmpxchg(&tp->tsq_flags, oval, nval);
- 		if (nval != oval)
- 			continue;
-@@ -2222,6 +2222,8 @@ static bool tcp_write_xmit(struct sock *
- 		    unlikely(tso_fragment(sk, skb, limit, mss_now, gfp)))
- 			break;
- 
-+		if (test_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags))
-+			clear_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags);
- 		if (tcp_small_queue_check(sk, skb, 0))
- 			break;
- 
diff --git a/target/linux/generic/backport-4.9/024-4-tcp-tsq-avoid-one-atomic-in-tcp_wfree.patch b/target/linux/generic/backport-4.9/024-4-tcp-tsq-avoid-one-atomic-in-tcp_wfree.patch
deleted file mode 100644
index 87452ac853..0000000000
--- a/target/linux/generic/backport-4.9/024-4-tcp-tsq-avoid-one-atomic-in-tcp_wfree.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From a9b204d1564702b704ad6fe74f10a102c7b87ba3 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 3 Dec 2016 11:14:53 -0800
-Subject: [PATCH 04/10] tcp: tsq: avoid one atomic in tcp_wfree()
-
-Under high load, tcp_wfree() has an atomic operation trying
-to schedule a tasklet over and over.
-
-We can schedule it only if our per cpu list was empty.
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv4/tcp_output.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -885,6 +885,7 @@ void tcp_wfree(struct sk_buff *skb)
- 
- 	for (oval = READ_ONCE(tp->tsq_flags);; oval = nval) {
- 		struct tsq_tasklet *tsq;
-+		bool empty;
- 
- 		if (!(oval & TSQF_THROTTLED) || (oval & TSQF_QUEUED))
- 			goto out;
-@@ -897,8 +898,10 @@ void tcp_wfree(struct sk_buff *skb)
- 		/* queue this socket to tasklet queue */
- 		local_irq_save(flags);
- 		tsq = this_cpu_ptr(&tsq_tasklet);
-+		empty = list_empty(&tsq->head);
- 		list_add(&tp->tsq_node, &tsq->head);
--		tasklet_schedule(&tsq->tasklet);
-+		if (empty)
-+			tasklet_schedule(&tsq->tasklet);
- 		local_irq_restore(flags);
- 		return;
- 	}
diff --git a/target/linux/generic/backport-4.9/024-5-tcp-tsq-add-a-shortcut-in-tcp_small_queue_check.patch b/target/linux/generic/backport-4.9/024-5-tcp-tsq-add-a-shortcut-in-tcp_small_queue_check.patch
deleted file mode 100644
index d04e365f98..0000000000
--- a/target/linux/generic/backport-4.9/024-5-tcp-tsq-add-a-shortcut-in-tcp_small_queue_check.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 75eefc6c59fd2c5f1ab95a3a113c217237d12a31 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 3 Dec 2016 11:14:54 -0800
-Subject: [PATCH 05/10] tcp: tsq: add a shortcut in tcp_small_queue_check()
-
-Always allow the two first skbs in write queue to be sent,
-regardless of sk_wmem_alloc/sk_pacing_rate values.
-
-This helps a lot in situations where TX completions are delayed either
-because of driver latencies or softirq latencies.
-
-Test is done with no cache line misses.
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv4/tcp_output.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -2127,6 +2127,15 @@ static bool tcp_small_queue_check(struct
- 	limit <<= factor;
- 
- 	if (atomic_read(&sk->sk_wmem_alloc) > limit) {
-+		/* Always send the 1st or 2nd skb in write queue.
-+		 * No need to wait for TX completion to call us back,
-+		 * after softirq/tasklet schedule.
-+		 * This helps when TX completions are delayed too much.
-+		 */
-+		if (skb == sk->sk_write_queue.next ||
-+		    skb->prev == sk->sk_write_queue.next)
-+			return false;
-+
- 		set_bit(TSQ_THROTTLED, &tcp_sk(sk)->tsq_flags);
- 		/* It is possible TX completion already happened
- 		 * before we set TSQ_THROTTLED, so we must
diff --git a/target/linux/generic/backport-4.9/024-6-tcp-tcp_mtu_probe-is-likely-to-exit-early.patch b/target/linux/generic/backport-4.9/024-6-tcp-tcp_mtu_probe-is-likely-to-exit-early.patch
deleted file mode 100644
index 2a6cd40c8a..0000000000
--- a/target/linux/generic/backport-4.9/024-6-tcp-tcp_mtu_probe-is-likely-to-exit-early.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 12a59abc22d6664f7d3944f625ceefee92de8820 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 3 Dec 2016 11:14:55 -0800
-Subject: [PATCH 06/10] tcp: tcp_mtu_probe() is likely to exit early
-
-Adding a likely() in tcp_mtu_probe() moves its code which used to
-be inlined in front of tcp_write_xmit()
-
-We still have a cache line miss to access icsk->icsk_mtup.enabled,
-we will probably have to reorganize fields to help data locality.
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv4/tcp_output.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -1960,26 +1960,26 @@ static bool tcp_can_coalesce_send_queue_
-  */
- static int tcp_mtu_probe(struct sock *sk)
- {
--	struct tcp_sock *tp = tcp_sk(sk);
- 	struct inet_connection_sock *icsk = inet_csk(sk);
-+	struct tcp_sock *tp = tcp_sk(sk);
- 	struct sk_buff *skb, *nskb, *next;
- 	struct net *net = sock_net(sk);
--	int len;
- 	int probe_size;
- 	int size_needed;
--	int copy;
-+	int copy, len;
- 	int mss_now;
- 	int interval;
- 
- 	/* Not currently probing/verifying,
- 	 * not in recovery,
- 	 * have enough cwnd, and
--	 * not SACKing (the variable headers throw things off) */
--	if (!icsk->icsk_mtup.enabled ||
--	    icsk->icsk_mtup.probe_size ||
--	    inet_csk(sk)->icsk_ca_state != TCP_CA_Open ||
--	    tp->snd_cwnd < 11 ||
--	    tp->rx_opt.num_sacks || tp->rx_opt.dsack)
-+	 * not SACKing (the variable headers throw things off)
-+	 */
-+	if (likely(!icsk->icsk_mtup.enabled ||
-+		   icsk->icsk_mtup.probe_size ||
-+		   inet_csk(sk)->icsk_ca_state != TCP_CA_Open ||
-+		   tp->snd_cwnd < 11 ||
-+		   tp->rx_opt.num_sacks || tp->rx_opt.dsack))
- 		return -1;
- 
- 	/* Use binary search for probe_size between tcp_mss_base,
diff --git a/target/linux/generic/backport-4.9/024-7-net-reorganize-struct-sock-for-better-data-locality.patch b/target/linux/generic/backport-4.9/024-7-net-reorganize-struct-sock-for-better-data-locality.patch
deleted file mode 100644
index a43b4037fe..0000000000
--- a/target/linux/generic/backport-4.9/024-7-net-reorganize-struct-sock-for-better-data-locality.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From 9115e8cd2a0c6eaaa900c462721f12e1d45f326c Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 3 Dec 2016 11:14:56 -0800
-Subject: [PATCH 07/10] net: reorganize struct sock for better data locality
-
-Group fields used in TX path, and keep some cache lines mostly read
-to permit sharing among cpus.
-
-Gained two 4 bytes holes on 64bit arches.
-
-Added a place holder for tcp tsq_flags, next to sk_wmem_alloc
-to speed up tcp_wfree() in the following patch.
-
-I have not added ____cacheline_aligned_in_smp, this might be done later.
-I prefer doing this once inet and tcp/udp sockets reorg is also done.
-
-Tested with both TCP and UDP.
-
-UDP receiver performance under flood increased by ~20 % :
-Accessing sk_filter/sk_wq/sk_napi_id no longer stalls because sk_drops
-was moved away from a critical cache line, now mostly read and shared.
-
-	/* --- cacheline 4 boundary (256 bytes) --- */
-	unsigned int               sk_napi_id;           /* 0x100   0x4 */
-	int                        sk_rcvbuf;            /* 0x104   0x4 */
-	struct sk_filter *         sk_filter;            /* 0x108   0x8 */
-	union {
-		struct socket_wq * sk_wq;                /*         0x8 */
-		struct socket_wq * sk_wq_raw;            /*         0x8 */
-	};                                               /* 0x110   0x8 */
-	struct xfrm_policy *       sk_policy[2];         /* 0x118  0x10 */
-	struct dst_entry *         sk_rx_dst;            /* 0x128   0x8 */
-	struct dst_entry *         sk_dst_cache;         /* 0x130   0x8 */
-	atomic_t                   sk_omem_alloc;        /* 0x138   0x4 */
-	int                        sk_sndbuf;            /* 0x13c   0x4 */
-	/* --- cacheline 5 boundary (320 bytes) --- */
-	int                        sk_wmem_queued;       /* 0x140   0x4 */
-	atomic_t                   sk_wmem_alloc;        /* 0x144   0x4 */
-	long unsigned int          sk_tsq_flags;         /* 0x148   0x8 */
-	struct sk_buff *           sk_send_head;         /* 0x150   0x8 */
-	struct sk_buff_head        sk_write_queue;       /* 0x158  0x18 */
-	__s32                      sk_peek_off;          /* 0x170   0x4 */
-	int                        sk_write_pending;     /* 0x174   0x4 */
-	long int                   sk_sndtimeo;          /* 0x178   0x8 */
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Tested-by: Paolo Abeni <pabeni@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/net/sock.h | 51 +++++++++++++++++++++++++++------------------------
- 1 file changed, 27 insertions(+), 24 deletions(-)
-
---- a/include/net/sock.h
-+++ b/include/net/sock.h
-@@ -344,6 +344,9 @@ struct sock {
- #define sk_rxhash		__sk_common.skc_rxhash
- 
- 	socket_lock_t		sk_lock;
-+	atomic_t		sk_drops;
-+	int			sk_rcvlowat;
-+	struct sk_buff_head	sk_error_queue;
- 	struct sk_buff_head	sk_receive_queue;
- 	/*
- 	 * The backlog queue is special, it is always used with
-@@ -360,14 +363,13 @@ struct sock {
- 		struct sk_buff	*tail;
- 	} sk_backlog;
- #define sk_rmem_alloc sk_backlog.rmem_alloc
--	int			sk_forward_alloc;
- 
--	__u32			sk_txhash;
-+	int			sk_forward_alloc;
- #ifdef CONFIG_NET_RX_BUSY_POLL
--	unsigned int		sk_napi_id;
- 	unsigned int		sk_ll_usec;
-+	/* ===== mostly read cache line ===== */
-+	unsigned int		sk_napi_id;
- #endif
--	atomic_t		sk_drops;
- 	int			sk_rcvbuf;
- 
- 	struct sk_filter __rcu	*sk_filter;
-@@ -380,11 +382,30 @@ struct sock {
- #endif
- 	struct dst_entry	*sk_rx_dst;
- 	struct dst_entry __rcu	*sk_dst_cache;
--	/* Note: 32bit hole on 64bit arches */
--	atomic_t		sk_wmem_alloc;
- 	atomic_t		sk_omem_alloc;
- 	int			sk_sndbuf;
-+
-+	/* ===== cache line for TX ===== */
-+	int			sk_wmem_queued;
-+	atomic_t		sk_wmem_alloc;
-+	unsigned long		sk_tsq_flags;
-+	struct sk_buff		*sk_send_head;
- 	struct sk_buff_head	sk_write_queue;
-+	__s32			sk_peek_off;
-+	int			sk_write_pending;
-+	long			sk_sndtimeo;
-+	struct timer_list	sk_timer;
-+	__u32			sk_priority;
-+	__u32			sk_mark;
-+	u32			sk_pacing_rate; /* bytes per second */
-+	u32			sk_max_pacing_rate;
-+	struct page_frag	sk_frag;
-+	netdev_features_t	sk_route_caps;
-+	netdev_features_t	sk_route_nocaps;
-+	int			sk_gso_type;
-+	unsigned int		sk_gso_max_size;
-+	gfp_t			sk_allocation;
-+	__u32			sk_txhash;
- 
- 	/*
- 	 * Because of non atomicity rules, all
-@@ -400,31 +421,17 @@ struct sock {
- #define SK_PROTOCOL_MAX U8_MAX
- 	kmemcheck_bitfield_end(flags);
- 
--	int			sk_wmem_queued;
--	gfp_t			sk_allocation;
--	u32			sk_pacing_rate; /* bytes per second */
--	u32			sk_max_pacing_rate;
--	netdev_features_t	sk_route_caps;
--	netdev_features_t	sk_route_nocaps;
--	int			sk_gso_type;
--	unsigned int		sk_gso_max_size;
- 	u16			sk_gso_max_segs;
--	int			sk_rcvlowat;
- 	unsigned long	        sk_lingertime;
--	struct sk_buff_head	sk_error_queue;
- 	struct proto		*sk_prot_creator;
- 	rwlock_t		sk_callback_lock;
- 	int			sk_err,
- 				sk_err_soft;
- 	u32			sk_ack_backlog;
- 	u32			sk_max_ack_backlog;
--	__u32			sk_priority;
--	__u32			sk_mark;
- 	struct pid		*sk_peer_pid;
- 	const struct cred	*sk_peer_cred;
- 	long			sk_rcvtimeo;
--	long			sk_sndtimeo;
--	struct timer_list	sk_timer;
- 	ktime_t			sk_stamp;
- #if BITS_PER_LONG==32
- 	seqlock_t		sk_stamp_seq;
-@@ -434,10 +441,6 @@ struct sock {
- 	u32			sk_tskey;
- 	struct socket		*sk_socket;
- 	void			*sk_user_data;
--	struct page_frag	sk_frag;
--	struct sk_buff		*sk_send_head;
--	__s32			sk_peek_off;
--	int			sk_write_pending;
- #ifdef CONFIG_SECURITY
- 	void			*sk_security;
- #endif
diff --git a/target/linux/generic/backport-4.9/024-8-tcp-tsq-move-tsq_flags-close-to-sk_wmem_alloc.patch b/target/linux/generic/backport-4.9/024-8-tcp-tsq-move-tsq_flags-close-to-sk_wmem_alloc.patch
deleted file mode 100644
index 0a5b9ead9d..0000000000
--- a/target/linux/generic/backport-4.9/024-8-tcp-tsq-move-tsq_flags-close-to-sk_wmem_alloc.patch
+++ /dev/null
@@ -1,176 +0,0 @@
-From 7aa5470c2c09265902b5e4289afa82e4e7c2987e Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 3 Dec 2016 11:14:57 -0800
-Subject: [PATCH 08/10] tcp: tsq: move tsq_flags close to sk_wmem_alloc
-
-tsq_flags being in the same cache line than sk_wmem_alloc
-makes a lot of sense. Both fields are changed from tcp_wfree()
-and more generally by various TSQ related functions.
-
-Prior patch made room in struct sock and added sk_tsq_flags,
-this patch deletes tsq_flags from struct tcp_sock.
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/tcp.h   |  1 -
- net/ipv4/tcp.c        |  4 ++--
- net/ipv4/tcp_ipv4.c   |  2 +-
- net/ipv4/tcp_output.c | 24 +++++++++++-------------
- net/ipv4/tcp_timer.c  |  4 ++--
- net/ipv6/tcp_ipv6.c   |  2 +-
- 6 files changed, 17 insertions(+), 20 deletions(-)
-
---- a/include/linux/tcp.h
-+++ b/include/linux/tcp.h
-@@ -192,7 +192,6 @@ struct tcp_sock {
- 	u32	tsoffset;	/* timestamp offset */
- 
- 	struct list_head tsq_node; /* anchor in tsq_tasklet.head list */
--	unsigned long	tsq_flags;
- 
- 	/* Data for direct copy to user */
- 	struct {
---- a/net/ipv4/tcp.c
-+++ b/net/ipv4/tcp.c
-@@ -665,9 +665,9 @@ static void tcp_push(struct sock *sk, in
- 	if (tcp_should_autocork(sk, skb, size_goal)) {
- 
- 		/* avoid atomic op if TSQ_THROTTLED bit is already set */
--		if (!test_bit(TSQ_THROTTLED, &tp->tsq_flags)) {
-+		if (!test_bit(TSQ_THROTTLED, &sk->sk_tsq_flags)) {
- 			NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPAUTOCORKING);
--			set_bit(TSQ_THROTTLED, &tp->tsq_flags);
-+			set_bit(TSQ_THROTTLED, &sk->sk_tsq_flags);
- 		}
- 		/* It is possible TX completion already happened
- 		 * before we set TSQ_THROTTLED.
---- a/net/ipv4/tcp_ipv4.c
-+++ b/net/ipv4/tcp_ipv4.c
-@@ -446,7 +446,7 @@ void tcp_v4_err(struct sk_buff *icmp_skb
- 			if (!sock_owned_by_user(sk)) {
- 				tcp_v4_mtu_reduced(sk);
- 			} else {
--				if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags))
-+				if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED, &sk->sk_tsq_flags))
- 					sock_hold(sk);
- 			}
- 			goto out;
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -772,14 +772,15 @@ static void tcp_tasklet_func(unsigned lo
- 	list_for_each_safe(q, n, &list) {
- 		tp = list_entry(q, struct tcp_sock, tsq_node);
- 		list_del(&tp->tsq_node);
--		clear_bit(TSQ_QUEUED, &tp->tsq_flags);
- 
- 		sk = (struct sock *)tp;
-+		clear_bit(TSQ_QUEUED, &sk->sk_tsq_flags);
-+
- 		if (!sk->sk_lock.owned &&
--		    test_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags)) {
-+		    test_bit(TCP_TSQ_DEFERRED, &sk->sk_tsq_flags)) {
- 			bh_lock_sock(sk);
- 			if (!sock_owned_by_user(sk)) {
--				clear_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags);
-+				clear_bit(TCP_TSQ_DEFERRED, &sk->sk_tsq_flags);
- 				tcp_tsq_handler(sk);
- 			}
- 			bh_unlock_sock(sk);
-@@ -802,16 +803,15 @@ static void tcp_tasklet_func(unsigned lo
-  */
- void tcp_release_cb(struct sock *sk)
- {
--	struct tcp_sock *tp = tcp_sk(sk);
- 	unsigned long flags, nflags;
- 
- 	/* perform an atomic operation only if at least one flag is set */
- 	do {
--		flags = tp->tsq_flags;
-+		flags = sk->sk_tsq_flags;
- 		if (!(flags & TCP_DEFERRED_ALL))
- 			return;
- 		nflags = flags & ~TCP_DEFERRED_ALL;
--	} while (cmpxchg(&tp->tsq_flags, flags, nflags) != flags);
-+	} while (cmpxchg(&sk->sk_tsq_flags, flags, nflags) != flags);
- 
- 	if (flags & TCPF_TSQ_DEFERRED)
- 		tcp_tsq_handler(sk);
-@@ -883,7 +883,7 @@ void tcp_wfree(struct sk_buff *skb)
- 	if (wmem >= SKB_TRUESIZE(1) && this_cpu_ksoftirqd() == current)
- 		goto out;
- 
--	for (oval = READ_ONCE(tp->tsq_flags);; oval = nval) {
-+	for (oval = READ_ONCE(sk->sk_tsq_flags);; oval = nval) {
- 		struct tsq_tasklet *tsq;
- 		bool empty;
- 
-@@ -891,7 +891,7 @@ void tcp_wfree(struct sk_buff *skb)
- 			goto out;
- 
- 		nval = (oval & ~TSQF_THROTTLED) | TSQF_QUEUED | TCPF_TSQ_DEFERRED;
--		nval = cmpxchg(&tp->tsq_flags, oval, nval);
-+		nval = cmpxchg(&sk->sk_tsq_flags, oval, nval);
- 		if (nval != oval)
- 			continue;
- 
-@@ -2136,7 +2136,7 @@ static bool tcp_small_queue_check(struct
- 		    skb->prev == sk->sk_write_queue.next)
- 			return false;
- 
--		set_bit(TSQ_THROTTLED, &tcp_sk(sk)->tsq_flags);
-+		set_bit(TSQ_THROTTLED, &sk->sk_tsq_flags);
- 		/* It is possible TX completion already happened
- 		 * before we set TSQ_THROTTLED, so we must
- 		 * test again the condition.
-@@ -2234,8 +2234,8 @@ static bool tcp_write_xmit(struct sock *
- 		    unlikely(tso_fragment(sk, skb, limit, mss_now, gfp)))
- 			break;
- 
--		if (test_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags))
--			clear_bit(TCP_TSQ_DEFERRED, &tp->tsq_flags);
-+		if (test_bit(TCP_TSQ_DEFERRED, &sk->sk_tsq_flags))
-+			clear_bit(TCP_TSQ_DEFERRED, &sk->sk_tsq_flags);
- 		if (tcp_small_queue_check(sk, skb, 0))
- 			break;
- 
-@@ -3546,8 +3546,6 @@ void __tcp_send_ack(struct sock *sk, u32
- 	/* We do not want pure acks influencing TCP Small Queues or fq/pacing
- 	 * too much.
- 	 * SKB_TRUESIZE(max(1 .. 66, MAX_TCP_HEADER)) is unfortunately ~784
--	 * We also avoid tcp_wfree() overhead (cache line miss accessing
--	 * tp->tsq_flags) by using regular sock_wfree()
- 	 */
- 	skb_set_tcp_pure_ack(buff);
- 
---- a/net/ipv4/tcp_timer.c
-+++ b/net/ipv4/tcp_timer.c
-@@ -326,7 +326,7 @@ static void tcp_delack_timer(unsigned lo
- 		inet_csk(sk)->icsk_ack.blocked = 1;
- 		__NET_INC_STATS(sock_net(sk), LINUX_MIB_DELAYEDACKLOCKED);
- 		/* deleguate our work to tcp_release_cb() */
--		if (!test_and_set_bit(TCP_DELACK_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags))
-+		if (!test_and_set_bit(TCP_DELACK_TIMER_DEFERRED, &sk->sk_tsq_flags))
- 			sock_hold(sk);
- 	}
- 	bh_unlock_sock(sk);
-@@ -609,7 +609,7 @@ static void tcp_write_timer(unsigned lon
- 		tcp_write_timer_handler(sk);
- 	} else {
- 		/* delegate our work to tcp_release_cb() */
--		if (!test_and_set_bit(TCP_WRITE_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags))
-+		if (!test_and_set_bit(TCP_WRITE_TIMER_DEFERRED, &sk->sk_tsq_flags))
- 			sock_hold(sk);
- 	}
- 	bh_unlock_sock(sk);
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -404,7 +404,7 @@ static void tcp_v6_err(struct sk_buff *s
- 		if (!sock_owned_by_user(sk))
- 			tcp_v6_mtu_reduced(sk);
- 		else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED,
--					   &tp->tsq_flags))
-+					   &sk->sk_tsq_flags))
- 			sock_hold(sk);
- 		goto out;
- 	}
diff --git a/target/linux/generic/backport-4.9/024-9-tcp-add-a-missing-barrier-in-tcp_tasklet_func.patch b/target/linux/generic/backport-4.9/024-9-tcp-add-a-missing-barrier-in-tcp_tasklet_func.patch
deleted file mode 100644
index bd74303266..0000000000
--- a/target/linux/generic/backport-4.9/024-9-tcp-add-a-missing-barrier-in-tcp_tasklet_func.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 0a9648f1293966c838dc570da73c15a76f4c89d6 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Wed, 21 Dec 2016 05:42:43 -0800
-Subject: [PATCH 09/10] tcp: add a missing barrier in tcp_tasklet_func()
-
-Madalin reported crashes happening in tcp_tasklet_func() on powerpc64
-
-Before TSQ_QUEUED bit is cleared, we must ensure the changes done
-by list_del(&tp->tsq_node); are committed to memory, otherwise
-corruption might happen, as an other cpu could catch TSQ_QUEUED
-clearance too soon.
-
-We can notice that old kernels were immune to this bug, because
-TSQ_QUEUED was cleared after a bh_lock_sock(sk)/bh_unlock_sock(sk)
-section, but they could have missed a kick to write additional bytes,
-when NIC interrupts for a given flow are spread to multiple cpus.
-
-Affected TCP flows would need an incoming ACK or RTO timer to add more
-packets to the pipe. So overall situation should be better now.
-
-Fixes: b223feb9de2a ("tcp: tsq: add shortcut in tcp_tasklet_func()")
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Reported-by: Madalin Bucur <madalin.bucur@nxp.com>
-Tested-by: Madalin Bucur <madalin.bucur@nxp.com>
-Tested-by: Xing Lei <xing.lei@nxp.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv4/tcp_output.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -774,6 +774,7 @@ static void tcp_tasklet_func(unsigned lo
- 		list_del(&tp->tsq_node);
- 
- 		sk = (struct sock *)tp;
-+		smp_mb__before_atomic();
- 		clear_bit(TSQ_QUEUED, &sk->sk_tsq_flags);
- 
- 		if (!sk->sk_lock.owned &&
diff --git a/target/linux/generic/backport-4.9/025-tcp-allow-drivers-to-tweak-TSQ-logic.patch b/target/linux/generic/backport-4.9/025-tcp-allow-drivers-to-tweak-TSQ-logic.patch
deleted file mode 100644
index 7741fd749a..0000000000
--- a/target/linux/generic/backport-4.9/025-tcp-allow-drivers-to-tweak-TSQ-logic.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From: Eric Dumazet <edumazet@google.com>
-Date: Sat, 11 Nov 2017 15:54:12 -0800
-Subject: [PATCH] tcp: allow drivers to tweak TSQ logic
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-I had many reports that TSQ logic breaks wifi aggregation.
-
-Current logic is to allow up to 1 ms of bytes to be queued into qdisc
-and drivers queues.
-
-But Wifi aggregation needs a bigger budget to allow bigger rates to
-be discovered by various TCP Congestion Controls algorithms.
-
-This patch adds an extra socket field, allowing wifi drivers to select
-another log scale to derive TCP Small Queue credit from current pacing
-rate.
-
-Initial value is 10, meaning that this patch does not change current
-behavior.
-
-We expect wifi drivers to set this field to smaller values (tests have
-been done with values from 6 to 9)
-
-They would have to use following template :
-
-if (skb->sk && skb->sk->sk_pacing_shift != MY_PACING_SHIFT)
-     skb->sk->sk_pacing_shift = MY_PACING_SHIFT;
-
-Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1670041
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Cc: Johannes Berg <johannes.berg@intel.com>
-Cc: Toke Høiland-Jørgensen <toke@toke.dk>
-Cc: Kir Kolyshkin <kir@openvz.org>
----
---- a/include/net/sock.h
-+++ b/include/net/sock.h
-@@ -260,6 +260,7 @@ struct sock_common {
-   *	@sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4)
-   *	@sk_gso_max_size: Maximum GSO segment size to build
-   *	@sk_gso_max_segs: Maximum number of GSO segments
-+  *	@sk_pacing_shift: scaling factor for TCP Small Queues
-   *	@sk_lingertime: %SO_LINGER l_linger setting
-   *	@sk_backlog: always used with the per-socket spinlock held
-   *	@sk_callback_lock: used with the callbacks in the end of this struct
-@@ -422,6 +423,8 @@ struct sock {
- 	kmemcheck_bitfield_end(flags);
- 
- 	u16			sk_gso_max_segs;
-+#define sk_pacing_shift sk_pacing_shift /* for backport checks */
-+	u8			sk_pacing_shift;
- 	unsigned long	        sk_lingertime;
- 	struct proto		*sk_prot_creator;
- 	rwlock_t		sk_callback_lock;
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -2479,6 +2479,7 @@ void sock_init_data(struct socket *sock,
- 
- 	sk->sk_max_pacing_rate = ~0U;
- 	sk->sk_pacing_rate = ~0U;
-+	sk->sk_pacing_shift = 10;
- 	sk->sk_incoming_cpu = -1;
- 	/*
- 	 * Before updating sk_refcnt, we must commit prior changes to memory
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -1593,7 +1593,7 @@ u32 tcp_tso_autosize(const struct sock *
- {
- 	u32 bytes, segs;
- 
--	bytes = min(sk->sk_pacing_rate >> 10,
-+	bytes = min(sk->sk_pacing_rate >> sk->sk_pacing_shift,
- 		    sk->sk_gso_max_size - 1 - MAX_TCP_HEADER);
- 
- 	/* Goal is to send at least one packet per ms,
-@@ -2123,7 +2123,7 @@ static bool tcp_small_queue_check(struct
- {
- 	unsigned int limit;
- 
--	limit = max(2 * skb->truesize, sk->sk_pacing_rate >> 10);
-+	limit = max(2 * skb->truesize, sk->sk_pacing_rate >> sk->sk_pacing_shift);
- 	limit = min_t(u32, limit, sysctl_tcp_limit_output_bytes);
- 	limit <<= factor;
- 
diff --git a/target/linux/generic/backport-4.9/030-01-ubifs-Drop-softlimit-and-delta-fields-from-struct-ub.patch b/target/linux/generic/backport-4.9/030-01-ubifs-Drop-softlimit-and-delta-fields-from-struct-ub.patch
deleted file mode 100644
index 8e1f312a0b..0000000000
--- a/target/linux/generic/backport-4.9/030-01-ubifs-Drop-softlimit-and-delta-fields-from-struct-ub.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 854826c9d526fd81077742c3b000e3f7fcaef3ce Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 20 Sep 2016 10:36:14 +0200
-Subject: [PATCH] ubifs: Drop softlimit and delta fields from struct ubifs_wbuf
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Values of these fields are set during init and never modified. They are
-used (read) in a single function only. There isn't really any reason to
-keep them in a struct. It only makes struct just a bit bigger without
-any visible gain.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- fs/ubifs/io.c    | 18 ++++++++++--------
- fs/ubifs/ubifs.h |  5 -----
- 2 files changed, 10 insertions(+), 13 deletions(-)
-
---- a/fs/ubifs/io.c
-+++ b/fs/ubifs/io.c
-@@ -452,16 +452,22 @@ static enum hrtimer_restart wbuf_timer_c
-  */
- static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
- {
-+	ktime_t softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0);
-+	unsigned long long delta;
-+
-+	delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT;
-+	delta *= 1000000000ULL;
-+
- 	ubifs_assert(!hrtimer_active(&wbuf->timer));
-+	ubifs_assert(delta <= ULONG_MAX);
- 
- 	if (wbuf->no_timer)
- 		return;
- 	dbg_io("set timer for jhead %s, %llu-%llu millisecs",
- 	       dbg_jhead(wbuf->jhead),
--	       div_u64(ktime_to_ns(wbuf->softlimit), USEC_PER_SEC),
--	       div_u64(ktime_to_ns(wbuf->softlimit) + wbuf->delta,
--		       USEC_PER_SEC));
--	hrtimer_start_range_ns(&wbuf->timer, wbuf->softlimit, wbuf->delta,
-+	       div_u64(ktime_to_ns(softlimit), USEC_PER_SEC),
-+	       div_u64(ktime_to_ns(softlimit) + delta, USEC_PER_SEC));
-+	hrtimer_start_range_ns(&wbuf->timer, softlimit, delta,
- 			       HRTIMER_MODE_REL);
- }
- 
-@@ -1059,10 +1065,6 @@ int ubifs_wbuf_init(struct ubifs_info *c
- 
- 	hrtimer_init(&wbuf->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- 	wbuf->timer.function = wbuf_timer_callback_nolock;
--	wbuf->softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0);
--	wbuf->delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT;
--	wbuf->delta *= 1000000000ULL;
--	ubifs_assert(wbuf->delta <= ULONG_MAX);
- 	return 0;
- }
- 
---- a/fs/ubifs/ubifs.h
-+++ b/fs/ubifs/ubifs.h
-@@ -645,9 +645,6 @@ typedef int (*ubifs_lpt_scan_callback)(s
-  * @io_mutex: serializes write-buffer I/O
-  * @lock: serializes @buf, @lnum, @offs, @avail, @used, @next_ino and @inodes
-  *        fields
-- * @softlimit: soft write-buffer timeout interval
-- * @delta: hard and soft timeouts delta (the timer expire interval is @softlimit
-- *         and @softlimit + @delta)
-  * @timer: write-buffer timer
-  * @no_timer: non-zero if this write-buffer does not have a timer
-  * @need_sync: non-zero if the timer expired and the wbuf needs sync'ing
-@@ -676,8 +673,6 @@ struct ubifs_wbuf {
- 	int (*sync_callback)(struct ubifs_info *c, int lnum, int free, int pad);
- 	struct mutex io_mutex;
- 	spinlock_t lock;
--	ktime_t softlimit;
--	unsigned long long delta;
- 	struct hrtimer timer;
- 	unsigned int no_timer:1;
- 	unsigned int need_sync:1;
diff --git a/target/linux/generic/backport-4.9/030-02-ubifs-Use-dirty_writeback_interval-value-for-wbuf-ti.patch b/target/linux/generic/backport-4.9/030-02-ubifs-Use-dirty_writeback_interval-value-for-wbuf-ti.patch
deleted file mode 100644
index 96fa441132..0000000000
--- a/target/linux/generic/backport-4.9/030-02-ubifs-Use-dirty_writeback_interval-value-for-wbuf-ti.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 1b7fc2c0069f3864a3dda15430b7aded31c0bfcc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 20 Sep 2016 10:36:15 +0200
-Subject: [PATCH] ubifs: Use dirty_writeback_interval value for wbuf timer
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Right now wbuf timer has hardcoded timeouts and there is no place for
-manual adjustments. Some projects / cases many need that though. Few
-file systems allow doing that by respecting dirty_writeback_interval
-that can be set using sysctl (dirty_writeback_centisecs).
-
-Lowering dirty_writeback_interval could be some way of dealing with user
-space apps lacking proper fsyncs. This is definitely *not* a perfect
-solution but we don't have ideal (user space) world. There were already
-advanced discussions on this matter, mostly when ext4 was introduced and
-it wasn't behaving as ext3. Anyway, the final decision was to add some
-hacks to the ext4, as trying to fix whole user space or adding new API
-was pointless.
-
-We can't (and shouldn't?) just follow ext4. We can't e.g. sync on close
-as this would cause too many commits and flash wearing. On the other
-hand we still should allow some trade-off between -o sync and default
-wbuf timeout. Respecting dirty_writeback_interval should allow some sane
-cutomizations if used warily.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- fs/ubifs/io.c    | 8 ++++----
- fs/ubifs/ubifs.h | 4 ----
- 2 files changed, 4 insertions(+), 8 deletions(-)
-
---- a/fs/ubifs/io.c
-+++ b/fs/ubifs/io.c
-@@ -452,11 +452,11 @@ static enum hrtimer_restart wbuf_timer_c
-  */
- static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
- {
--	ktime_t softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0);
--	unsigned long long delta;
-+	ktime_t softlimit = ms_to_ktime(dirty_writeback_interval * 10);
-+	unsigned long long delta = dirty_writeback_interval;
- 
--	delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT;
--	delta *= 1000000000ULL;
-+	/* centi to milli, milli to nano, then 10% */
-+	delta *= 10ULL * NSEC_PER_MSEC / 10ULL;
- 
- 	ubifs_assert(!hrtimer_active(&wbuf->timer));
- 	ubifs_assert(delta <= ULONG_MAX);
---- a/fs/ubifs/ubifs.h
-+++ b/fs/ubifs/ubifs.h
-@@ -83,10 +83,6 @@
-  */
- #define BGT_NAME_PATTERN "ubifs_bgt%d_%d"
- 
--/* Write-buffer synchronization timeout interval in seconds */
--#define WBUF_TIMEOUT_SOFTLIMIT 3
--#define WBUF_TIMEOUT_HARDLIMIT 5
--
- /* Maximum possible inode number (only 32-bit inodes are supported now) */
- #define MAX_INUM 0xFFFFFFFF
- 
diff --git a/target/linux/generic/backport-4.9/040-mm-add-support-for-releasing-multiple-instances-of-a.patch b/target/linux/generic/backport-4.9/040-mm-add-support-for-releasing-multiple-instances-of-a.patch
deleted file mode 100644
index d4b60d4559..0000000000
--- a/target/linux/generic/backport-4.9/040-mm-add-support-for-releasing-multiple-instances-of-a.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From: Alexander Duyck <alexander.h.duyck@intel.com>
-Date: Wed, 14 Dec 2016 15:05:26 -0800
-Subject: [PATCH] mm: add support for releasing multiple instances of a page
-
-Add a function that allows us to batch free a page that has multiple
-references outstanding.  Specifically this function can be used to drop
-a page being used in the page frag alloc cache.  With this drivers can
-make use of functionality similar to the page frag alloc cache without
-having to do any workarounds for the fact that there is no function that
-frees multiple references.
-
-Link: http://lkml.kernel.org/r/20161110113606.76501.70752.stgit@ahduyck-blue-test.jf.intel.com
-Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
-Cc: "David S. Miller" <davem@davemloft.net>
-Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
-Cc: Chris Metcalf <cmetcalf@mellanox.com>
-Cc: David Howells <dhowells@redhat.com>
-Cc: Geert Uytterhoeven <geert@linux-m68k.org>
-Cc: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
-Cc: Helge Deller <deller@gmx.de>
-Cc: James Hogan <james.hogan@imgtec.com>
-Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: Jonas Bonn <jonas@southpole.se>
-Cc: Keguang Zhang <keguang.zhang@gmail.com>
-Cc: Ley Foon Tan <lftan@altera.com>
-Cc: Mark Salter <msalter@redhat.com>
-Cc: Max Filippov <jcmvbkbc@gmail.com>
-Cc: Michael Ellerman <mpe@ellerman.id.au>
-Cc: Michal Simek <monstr@monstr.eu>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: Rich Felker <dalias@libc.org>
-Cc: Richard Kuo <rkuo@codeaurora.org>
-Cc: Russell King <linux@armlinux.org.uk>
-Cc: Steven Miao <realmz6@gmail.com>
-Cc: Tobias Klauser <tklauser@distanz.ch>
-Cc: Vineet Gupta <vgupta@synopsys.com>
-Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
-
---- a/include/linux/gfp.h
-+++ b/include/linux/gfp.h
-@@ -506,6 +506,8 @@ extern void free_hot_cold_page(struct pa
- extern void free_hot_cold_page_list(struct list_head *list, bool cold);
- 
- struct page_frag_cache;
-+extern void __page_frag_drain(struct page *page, unsigned int order,
-+			      unsigned int count);
- extern void *__alloc_page_frag(struct page_frag_cache *nc,
- 			       unsigned int fragsz, gfp_t gfp_mask);
- extern void __free_page_frag(void *addr);
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -3935,6 +3935,20 @@ static struct page *__page_frag_refill(s
- 	return page;
- }
- 
-+void __page_frag_drain(struct page *page, unsigned int order,
-+		       unsigned int count)
-+{
-+	VM_BUG_ON_PAGE(page_ref_count(page) == 0, page);
-+
-+	if (page_ref_sub_and_test(page, count)) {
-+		if (order == 0)
-+			free_hot_cold_page(page, false);
-+		else
-+			__free_pages_ok(page, order);
-+	}
-+}
-+EXPORT_SYMBOL(__page_frag_drain);
-+
- void *__alloc_page_frag(struct page_frag_cache *nc,
- 			unsigned int fragsz, gfp_t gfp_mask)
- {
diff --git a/target/linux/generic/backport-4.9/041-mm-rename-__alloc_page_frag-to-page_frag_alloc-and-_.patch b/target/linux/generic/backport-4.9/041-mm-rename-__alloc_page_frag-to-page_frag_alloc-and-_.patch
deleted file mode 100644
index facc43004e..0000000000
--- a/target/linux/generic/backport-4.9/041-mm-rename-__alloc_page_frag-to-page_frag_alloc-and-_.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: Alexander Duyck <alexander.h.duyck@intel.com>
-Date: Tue, 10 Jan 2017 16:58:06 -0800
-Subject: [PATCH] mm: rename __alloc_page_frag to page_frag_alloc and
- __free_page_frag to page_frag_free
-
-Patch series "Page fragment updates", v4.
-
-This patch series takes care of a few cleanups for the page fragments
-API.
-
-First we do some renames so that things are much more consistent.  First
-we move the page_frag_ portion of the name to the front of the functions
-names.  Secondly we split out the cache specific functions from the
-other page fragment functions by adding the word "cache" to the name.
-
-Finally I added a bit of documentation that will hopefully help to
-explain some of this.  I plan to revisit this later as we get things
-more ironed out in the near future with the changes planned for the DMA
-setup to support eXpress Data Path.
-
-This patch (of 3):
-
-This patch renames the page frag functions to be more consistent with
-other APIs.  Specifically we place the name page_frag first in the name
-and then have either an alloc or free call name that we append as the
-suffix.  This makes it a bit clearer in terms of naming.
-
-In addition we drop the leading double underscores since we are
-technically no longer a backing interface and instead the front end that
-is called from the networking APIs.
-
-Link: http://lkml.kernel.org/r/20170104023854.13451.67390.stgit@localhost.localdomain
-Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
-
---- a/include/linux/gfp.h
-+++ b/include/linux/gfp.h
-@@ -508,9 +508,9 @@ extern void free_hot_cold_page_list(stru
- struct page_frag_cache;
- extern void __page_frag_drain(struct page *page, unsigned int order,
- 			      unsigned int count);
--extern void *__alloc_page_frag(struct page_frag_cache *nc,
--			       unsigned int fragsz, gfp_t gfp_mask);
--extern void __free_page_frag(void *addr);
-+extern void *page_frag_alloc(struct page_frag_cache *nc,
-+			     unsigned int fragsz, gfp_t gfp_mask);
-+extern void page_frag_free(void *addr);
- 
- #define __free_page(page) __free_pages((page), 0)
- #define free_page(addr) free_pages((addr), 0)
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2476,7 +2476,7 @@ static inline struct sk_buff *netdev_all
- 
- static inline void skb_free_frag(void *addr)
- {
--	__free_page_frag(addr);
-+	page_frag_free(addr);
- }
- 
- void *napi_alloc_frag(unsigned int fragsz);
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -3949,8 +3949,8 @@ void __page_frag_drain(struct page *page
- }
- EXPORT_SYMBOL(__page_frag_drain);
- 
--void *__alloc_page_frag(struct page_frag_cache *nc,
--			unsigned int fragsz, gfp_t gfp_mask)
-+void *page_frag_alloc(struct page_frag_cache *nc,
-+		      unsigned int fragsz, gfp_t gfp_mask)
- {
- 	unsigned int size = PAGE_SIZE;
- 	struct page *page;
-@@ -4001,19 +4001,19 @@ refill:
- 
- 	return nc->va + offset;
- }
--EXPORT_SYMBOL(__alloc_page_frag);
-+EXPORT_SYMBOL(page_frag_alloc);
- 
- /*
-  * Frees a page fragment allocated out of either a compound or order 0 page.
-  */
--void __free_page_frag(void *addr)
-+void page_frag_free(void *addr)
- {
- 	struct page *page = virt_to_head_page(addr);
- 
- 	if (unlikely(put_page_testzero(page)))
- 		__free_pages_ok(page, compound_order(page));
- }
--EXPORT_SYMBOL(__free_page_frag);
-+EXPORT_SYMBOL(page_frag_free);
- 
- static void *make_alloc_exact(unsigned long addr, unsigned int order,
- 		size_t size)
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -369,7 +369,7 @@ static void *__netdev_alloc_frag(unsigne
- 
- 	local_irq_save(flags);
- 	nc = this_cpu_ptr(&netdev_alloc_cache);
--	data = __alloc_page_frag(nc, fragsz, gfp_mask);
-+	data = page_frag_alloc(nc, fragsz, gfp_mask);
- 	local_irq_restore(flags);
- 	return data;
- }
-@@ -393,7 +393,7 @@ static void *__napi_alloc_frag(unsigned
- {
- 	struct napi_alloc_cache *nc = this_cpu_ptr(&napi_alloc_cache);
- 
--	return __alloc_page_frag(&nc->page, fragsz, gfp_mask);
-+	return page_frag_alloc(&nc->page, fragsz, gfp_mask);
- }
- 
- void *napi_alloc_frag(unsigned int fragsz)
-@@ -445,7 +445,7 @@ struct sk_buff *__netdev_alloc_skb(struc
- 	local_irq_save(flags);
- 
- 	nc = this_cpu_ptr(&netdev_alloc_cache);
--	data = __alloc_page_frag(nc, len, gfp_mask);
-+	data = page_frag_alloc(nc, len, gfp_mask);
- 	pfmemalloc = nc->pfmemalloc;
- 
- 	local_irq_restore(flags);
-@@ -509,7 +509,7 @@ struct sk_buff *__napi_alloc_skb(struct
- 	if (sk_memalloc_socks())
- 		gfp_mask |= __GFP_MEMALLOC;
- 
--	data = __alloc_page_frag(&nc->page, len, gfp_mask);
-+	data = page_frag_alloc(&nc->page, len, gfp_mask);
- 	if (unlikely(!data))
- 		return NULL;
- 
diff --git a/target/linux/generic/backport-4.9/042-mm-rename-__page_frag-functions-to-__page_frag_cache.patch b/target/linux/generic/backport-4.9/042-mm-rename-__page_frag-functions-to-__page_frag_cache.patch
deleted file mode 100644
index 31b57167b4..0000000000
--- a/target/linux/generic/backport-4.9/042-mm-rename-__page_frag-functions-to-__page_frag_cache.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Alexander Duyck <alexander.h.duyck@intel.com>
-Date: Tue, 10 Jan 2017 16:58:09 -0800
-Subject: [PATCH] mm: rename __page_frag functions to __page_frag_cache, drop
- order from drain
-
-This patch does two things.
-
-First it goes through and renames the __page_frag prefixed functions to
-__page_frag_cache so that we can be clear that we are draining or
-refilling the cache, not the frags themselves.
-
-Second we drop the order parameter from __page_frag_cache_drain since we
-don't actually need to pass it since all fragments are either order 0 or
-must be a compound page.
-
-Link: http://lkml.kernel.org/r/20170104023954.13451.5678.stgit@localhost.localdomain
-Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
-
---- a/include/linux/gfp.h
-+++ b/include/linux/gfp.h
-@@ -506,8 +506,7 @@ extern void free_hot_cold_page(struct pa
- extern void free_hot_cold_page_list(struct list_head *list, bool cold);
- 
- struct page_frag_cache;
--extern void __page_frag_drain(struct page *page, unsigned int order,
--			      unsigned int count);
-+extern void __page_frag_cache_drain(struct page *page, unsigned int count);
- extern void *page_frag_alloc(struct page_frag_cache *nc,
- 			     unsigned int fragsz, gfp_t gfp_mask);
- extern void page_frag_free(void *addr);
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -3914,8 +3914,8 @@ EXPORT_SYMBOL(free_pages);
-  * drivers to provide a backing region of memory for use as either an
-  * sk_buff->head, or to be used in the "frags" portion of skb_shared_info.
-  */
--static struct page *__page_frag_refill(struct page_frag_cache *nc,
--				       gfp_t gfp_mask)
-+static struct page *__page_frag_cache_refill(struct page_frag_cache *nc,
-+					     gfp_t gfp_mask)
- {
- 	struct page *page = NULL;
- 	gfp_t gfp = gfp_mask;
-@@ -3935,19 +3935,20 @@ static struct page *__page_frag_refill(s
- 	return page;
- }
- 
--void __page_frag_drain(struct page *page, unsigned int order,
--		       unsigned int count)
-+void __page_frag_cache_drain(struct page *page, unsigned int count)
- {
- 	VM_BUG_ON_PAGE(page_ref_count(page) == 0, page);
- 
- 	if (page_ref_sub_and_test(page, count)) {
-+		unsigned int order = compound_order(page);
-+
- 		if (order == 0)
- 			free_hot_cold_page(page, false);
- 		else
- 			__free_pages_ok(page, order);
- 	}
- }
--EXPORT_SYMBOL(__page_frag_drain);
-+EXPORT_SYMBOL(__page_frag_cache_drain);
- 
- void *page_frag_alloc(struct page_frag_cache *nc,
- 		      unsigned int fragsz, gfp_t gfp_mask)
-@@ -3958,7 +3959,7 @@ void *page_frag_alloc(struct page_frag_c
- 
- 	if (unlikely(!nc->va)) {
- refill:
--		page = __page_frag_refill(nc, gfp_mask);
-+		page = __page_frag_cache_refill(nc, gfp_mask);
- 		if (!page)
- 			return NULL;
- 
diff --git a/target/linux/generic/backport-4.9/060-0002-mtd-bcm47xxsflash-use-platform_-set-get-_drvdata.patch b/target/linux/generic/backport-4.9/060-0002-mtd-bcm47xxsflash-use-platform_-set-get-_drvdata.patch
deleted file mode 100644
index d975a26202..0000000000
--- a/target/linux/generic/backport-4.9/060-0002-mtd-bcm47xxsflash-use-platform_-set-get-_drvdata.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From be5e5099183301fb7920f8f6b66bd3ac1f820a97 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 16 Jan 2017 17:28:18 +0100
-Subject: [PATCH] mtd: bcm47xxsflash: use platform_(set|get)_drvdata
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We have generic place & helpers for storing platform driver data so
-there is no reason for using custom priv pointer.
-
-This allows cleaning up struct bcma_sflash from unneeded fields.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Kalle Valo <kvalo@codeaurora.org>
-Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/devices/bcm47xxsflash.c         | 6 +++---
- include/linux/bcma/bcma_driver_chipcommon.h | 3 ---
- 2 files changed, 3 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/devices/bcm47xxsflash.c
-+++ b/drivers/mtd/devices/bcm47xxsflash.c
-@@ -284,7 +284,6 @@ static int bcm47xxsflash_bcma_probe(stru
- 	b47s = devm_kzalloc(dev, sizeof(*b47s), GFP_KERNEL);
- 	if (!b47s)
- 		return -ENOMEM;
--	sflash->priv = b47s;
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	if (!res) {
-@@ -320,6 +319,8 @@ static int bcm47xxsflash_bcma_probe(stru
- 	b47s->size = sflash->size;
- 	bcm47xxsflash_fill_mtd(b47s, &pdev->dev);
- 
-+	platform_set_drvdata(pdev, b47s);
-+
- 	err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
- 	if (err) {
- 		pr_err("Failed to register MTD device: %d\n", err);
-@@ -335,8 +336,7 @@ static int bcm47xxsflash_bcma_probe(stru
- 
- static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
- {
--	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
--	struct bcm47xxsflash *b47s = sflash->priv;
-+	struct bcm47xxsflash *b47s = platform_get_drvdata(pdev);
- 
- 	mtd_device_unregister(&b47s->mtd);
- 	iounmap(b47s->window);
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -593,9 +593,6 @@ struct bcma_sflash {
- 	u32 blocksize;
- 	u16 numblocks;
- 	u32 size;
--
--	struct mtd_info *mtd;
--	void *priv;
- };
- #endif
- 
diff --git a/target/linux/generic/backport-4.9/060-0003-mtd-bcm47xxsflash-support-reading-flash-out-of-mappi.patch b/target/linux/generic/backport-4.9/060-0003-mtd-bcm47xxsflash-support-reading-flash-out-of-mappi.patch
deleted file mode 100644
index ecdae2a871..0000000000
--- a/target/linux/generic/backport-4.9/060-0003-mtd-bcm47xxsflash-support-reading-flash-out-of-mappi.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From ccc38234fdc70120be79e7fb2df5c27ca5cd4c8a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 8 Feb 2017 23:53:44 +0100
-Subject: [PATCH] mtd: bcm47xxsflash: support reading flash out of mapping
- window
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For reading flash content we use MMIO but it's possible to read only
-first 16 MiB this way. It's simply an arch design/limitation.
-To support flash sizes bigger than 16 MiB implement indirect access
-using ChipCommon registers.
-This has been tested using MX25L25635F.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/devices/bcm47xxsflash.c | 24 +++++++++++++++++++++---
- drivers/mtd/devices/bcm47xxsflash.h |  3 +++
- 2 files changed, 24 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/devices/bcm47xxsflash.c
-+++ b/drivers/mtd/devices/bcm47xxsflash.c
-@@ -105,15 +105,33 @@ static int bcm47xxsflash_read(struct mtd
- 			      size_t *retlen, u_char *buf)
- {
- 	struct bcm47xxsflash *b47s = mtd->priv;
-+	size_t orig_len = len;
- 
- 	/* Check address range */
- 	if ((from + len) > mtd->size)
- 		return -EINVAL;
- 
--	memcpy_fromio(buf, b47s->window + from, len);
--	*retlen = len;
-+	/* Read as much as possible using fast MMIO window */
-+	if (from < BCM47XXSFLASH_WINDOW_SZ) {
-+		size_t memcpy_len;
- 
--	return len;
-+		memcpy_len = min(len, (size_t)(BCM47XXSFLASH_WINDOW_SZ - from));
-+		memcpy_fromio(buf, b47s->window + from, memcpy_len);
-+		from += memcpy_len;
-+		len -= memcpy_len;
-+		buf += memcpy_len;
-+	}
-+
-+	/* Use indirect access for content out of the window */
-+	for (; len; len--) {
-+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, from++);
-+		bcm47xxsflash_cmd(b47s, OPCODE_ST_READ4B);
-+		*buf++ = b47s->cc_read(b47s, BCMA_CC_FLASHDATA);
-+	}
-+
-+	*retlen = orig_len;
-+
-+	return orig_len;
- }
- 
- static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len,
---- a/drivers/mtd/devices/bcm47xxsflash.h
-+++ b/drivers/mtd/devices/bcm47xxsflash.h
-@@ -3,6 +3,8 @@
- 
- #include <linux/mtd/mtd.h>
- 
-+#define BCM47XXSFLASH_WINDOW_SZ			SZ_16M
-+
- /* Used for ST flashes only. */
- #define OPCODE_ST_WREN		0x0006		/* Write Enable */
- #define OPCODE_ST_WRDIS		0x0004		/* Write Disable */
-@@ -16,6 +18,7 @@
- #define OPCODE_ST_RES		0x03ab		/* Read Electronic Signature */
- #define OPCODE_ST_CSA		0x1000		/* Keep chip select asserted */
- #define OPCODE_ST_SSE		0x0220		/* Sub-sector Erase */
-+#define OPCODE_ST_READ4B	0x6313		/* Read Data Bytes in 4Byte addressing mode */
- 
- /* Used for Atmel flashes only. */
- #define OPCODE_AT_READ				0x07e8
diff --git a/target/linux/generic/backport-4.9/060-0004-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch b/target/linux/generic/backport-4.9/060-0004-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch
deleted file mode 100644
index 999f544d3b..0000000000
--- a/target/linux/generic/backport-4.9/060-0004-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From b522d7b0ebe3539340c2a6d46d787ae3d33bcb92 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 10 Jan 2017 23:15:24 +0100
-Subject: [PATCH] mtd: bcm47xxpart: move TRX parsing code to separated function
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This change simplifies main parsing loop logic a bit. In future it may
-be useful for moving TRX support to separated module / parser (if we
-implement support for them at some point).
-Finally parsing TRX at the end puts us in a better position as we have
-better flash layout knowledge. It may be useful e.g. if it appears there
-is more than 1 TRX partition.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 121 ++++++++++++++++++++++++++++------------------
- 1 file changed, 74 insertions(+), 47 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -83,6 +83,67 @@ out_default:
- 	return "rootfs";
- }
- 
-+static int bcm47xxpart_parse_trx(struct mtd_info *master,
-+				 struct mtd_partition *trx,
-+				 struct mtd_partition *parts,
-+				 size_t parts_len)
-+{
-+	struct trx_header header;
-+	size_t bytes_read;
-+	int curr_part = 0;
-+	int i, err;
-+
-+	if (parts_len < 3) {
-+		pr_warn("No enough space to add TRX partitions!\n");
-+		return -ENOMEM;
-+	}
-+
-+	err = mtd_read(master, trx->offset, sizeof(header), &bytes_read,
-+		       (uint8_t *)&header);
-+	if (err && !mtd_is_bitflip(err)) {
-+		pr_err("mtd_read error while reading TRX header: %d\n", err);
-+		return err;
-+	}
-+
-+	i = 0;
-+
-+	/* We have LZMA loader if offset[2] points to sth */
-+	if (header.offset[2]) {
-+		bcm47xxpart_add_part(&parts[curr_part++], "loader",
-+				     trx->offset + header.offset[i], 0);
-+		i++;
-+	}
-+
-+	if (header.offset[i]) {
-+		bcm47xxpart_add_part(&parts[curr_part++], "linux",
-+				     trx->offset + header.offset[i], 0);
-+		i++;
-+	}
-+
-+	if (header.offset[i]) {
-+		size_t offset = trx->offset + header.offset[i];
-+		const char *name = bcm47xxpart_trx_data_part_name(master,
-+								  offset);
-+
-+		bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0);
-+		i++;
-+	}
-+
-+	/*
-+	 * Assume that every partition ends at the beginning of the one it is
-+	 * followed by.
-+	 */
-+	for (i = 0; i < curr_part; i++) {
-+		u64 next_part_offset = (i < curr_part - 1) ?
-+					parts[i + 1].offset :
-+					trx->offset + trx->size;
-+
-+		parts[i].size = next_part_offset - parts[i].offset;
-+	}
-+
-+	return curr_part;
-+}
-+
- static int bcm47xxpart_parse(struct mtd_info *master,
- 			     const struct mtd_partition **pparts,
- 			     struct mtd_part_parser_data *data)
-@@ -93,9 +154,7 @@ static int bcm47xxpart_parse(struct mtd_
- 	size_t bytes_read;
- 	uint32_t offset;
- 	uint32_t blocksize = master->erasesize;
--	struct trx_header *trx;
- 	int trx_part = -1;
--	int last_trx_part = -1;
- 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
- 	int err;
- 
-@@ -182,54 +241,14 @@ static int bcm47xxpart_parse(struct mtd_
- 
- 		/* TRX */
- 		if (buf[0x000 / 4] == TRX_MAGIC) {
--			if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
--				pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
--				break;
--			}
--
--			trx = (struct trx_header *)buf;
-+			struct trx_header *trx;
- 
- 			trx_part = curr_part;
- 			bcm47xxpart_add_part(&parts[curr_part++], "firmware",
- 					     offset, 0);
- 
--			i = 0;
--			/* We have LZMA loader if offset[2] points to sth */
--			if (trx->offset[2]) {
--				bcm47xxpart_add_part(&parts[curr_part++],
--						     "loader",
--						     offset + trx->offset[i],
--						     0);
--				i++;
--			}
--
--			if (trx->offset[i]) {
--				bcm47xxpart_add_part(&parts[curr_part++],
--						     "linux",
--						     offset + trx->offset[i],
--						     0);
--				i++;
--			}
--
--			/*
--			 * Pure rootfs size is known and can be calculated as:
--			 * trx->length - trx->offset[i]. We don't fill it as
--			 * we want to have jffs2 (overlay) in the same mtd.
--			 */
--			if (trx->offset[i]) {
--				const char *name;
--
--				name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]);
--				bcm47xxpart_add_part(&parts[curr_part++],
--						     name,
--						     offset + trx->offset[i],
--						     0);
--				i++;
--			}
--
--			last_trx_part = curr_part - 1;
--
- 			/* Jump to the end of TRX */
-+			trx = (struct trx_header *)buf;
- 			offset = roundup(offset + trx->length, blocksize);
- 			/* Next loop iteration will increase the offset */
- 			offset -= blocksize;
-@@ -307,9 +326,17 @@ static int bcm47xxpart_parse(struct mtd_
- 				       parts[i + 1].offset : master->size;
- 
- 		parts[i].size = next_part_offset - parts[i].offset;
--		if (i == last_trx_part && trx_part >= 0)
--			parts[trx_part].size = next_part_offset -
--					       parts[trx_part].offset;
-+	}
-+
-+	/* If there was TRX parse it now */
-+	if (trx_part >= 0) {
-+		int num_parts;
-+
-+		num_parts = bcm47xxpart_parse_trx(master, &parts[trx_part],
-+						  parts + curr_part,
-+						  BCM47XXPART_MAX_PARTS - curr_part);
-+		if (num_parts > 0)
-+			curr_part += num_parts;
- 	}
- 
- 	*pparts = parts;
diff --git a/target/linux/generic/backport-4.9/060-0005-mtd-bcm47xxpart-support-layouts-with-multiple-TRX-pa.patch b/target/linux/generic/backport-4.9/060-0005-mtd-bcm47xxpart-support-layouts-with-multiple-TRX-pa.patch
deleted file mode 100644
index bcefee8e87..0000000000
--- a/target/linux/generic/backport-4.9/060-0005-mtd-bcm47xxpart-support-layouts-with-multiple-TRX-pa.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 89a0d9a9f1941a086a82bc7cd73d275cec98ba14 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 10 Jan 2017 23:15:25 +0100
-Subject: [PATCH] mtd: bcm47xxpart: support layouts with multiple TRX
- partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some devices may have an extra TRX partition used as failsafe one. If
-we detect such partition we should set a proper name for it and don't
-parse it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 56 ++++++++++++++++++++++++++++++++++++++---------
- 1 file changed, 46 insertions(+), 10 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -9,6 +9,7 @@
-  *
-  */
- 
-+#include <linux/bcm47xx_nvram.h>
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/slab.h>
-@@ -144,6 +145,30 @@ static int bcm47xxpart_parse_trx(struct
- 	return curr_part;
- }
- 
-+/**
-+ * bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader
-+ *
-+ * Some devices may have more than one TRX partition. In such case one of them
-+ * is the main one and another a failsafe one. Bootloader may fallback to the
-+ * failsafe firmware if it detects corruption of the main image.
-+ *
-+ * This function provides info about currently used TRX partition. It's the one
-+ * containing kernel started by the bootloader.
-+ */
-+static int bcm47xxpart_bootpartition(void)
-+{
-+	char buf[4];
-+	int bootpartition;
-+
-+	/* Check CFE environment variable */
-+	if (bcm47xx_nvram_getenv("bootpartition", buf, sizeof(buf)) > 0) {
-+		if (!kstrtoint(buf, 0, &bootpartition))
-+			return bootpartition;
-+	}
-+
-+	return 0;
-+}
-+
- static int bcm47xxpart_parse(struct mtd_info *master,
- 			     const struct mtd_partition **pparts,
- 			     struct mtd_part_parser_data *data)
-@@ -154,7 +179,8 @@ static int bcm47xxpart_parse(struct mtd_
- 	size_t bytes_read;
- 	uint32_t offset;
- 	uint32_t blocksize = master->erasesize;
--	int trx_part = -1;
-+	int trx_parts[2]; /* Array with indexes of TRX partitions */
-+	int trx_num = 0; /* Number of found TRX partitions */
- 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
- 	int err;
- 
-@@ -243,7 +269,11 @@ static int bcm47xxpart_parse(struct mtd_
- 		if (buf[0x000 / 4] == TRX_MAGIC) {
- 			struct trx_header *trx;
- 
--			trx_part = curr_part;
-+			if (trx_num >= ARRAY_SIZE(trx_parts))
-+				pr_warn("No enough space to store another TRX found at 0x%X\n",
-+					offset);
-+			else
-+				trx_parts[trx_num++] = curr_part;
- 			bcm47xxpart_add_part(&parts[curr_part++], "firmware",
- 					     offset, 0);
- 
-@@ -329,14 +359,20 @@ static int bcm47xxpart_parse(struct mtd_
- 	}
- 
- 	/* If there was TRX parse it now */
--	if (trx_part >= 0) {
--		int num_parts;
-+	for (i = 0; i < trx_num; i++) {
-+		struct mtd_partition *trx = &parts[trx_parts[i]];
- 
--		num_parts = bcm47xxpart_parse_trx(master, &parts[trx_part],
--						  parts + curr_part,
--						  BCM47XXPART_MAX_PARTS - curr_part);
--		if (num_parts > 0)
--			curr_part += num_parts;
-+		if (i == bcm47xxpart_bootpartition()) {
-+			int num_parts;
-+
-+			num_parts = bcm47xxpart_parse_trx(master, trx,
-+							  parts + curr_part,
-+							  BCM47XXPART_MAX_PARTS - curr_part);
-+			if (num_parts > 0)
-+				curr_part += num_parts;
-+		} else {
-+			trx->name = "failsafe";
-+		}
- 	}
- 
- 	*pparts = parts;
diff --git a/target/linux/generic/backport-4.9/061-v4.10-0001-mtd-spi-nor-add-Macronix-mx25u25635f-to-list-of-know.patch b/target/linux/generic/backport-4.9/061-v4.10-0001-mtd-spi-nor-add-Macronix-mx25u25635f-to-list-of-know.patch
deleted file mode 100644
index a70d827782..0000000000
--- a/target/linux/generic/backport-4.9/061-v4.10-0001-mtd-spi-nor-add-Macronix-mx25u25635f-to-list-of-know.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 355445b86f0f61125409e1217be4f0a8ee362116 Mon Sep 17 00:00:00 2001
-From: Ash Benz <ash.benz@bk.ru>
-Date: Sat, 19 Nov 2016 07:51:49 +0800
-Subject: [PATCH] mtd: spi-nor: add Macronix mx25u25635f to list of known
- devices.
-
-Signed-off-by: Ash Benz <ash.benz@bk.ru>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -878,6 +878,7 @@ static const struct flash_info spi_nor_i
- 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
-+	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K) },
- 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
- 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
diff --git a/target/linux/generic/backport-4.9/061-v4.10-0002-mtd-spi-nor-fix-spansion-quad-enable.patch b/target/linux/generic/backport-4.9/061-v4.10-0002-mtd-spi-nor-fix-spansion-quad-enable.patch
deleted file mode 100644
index e4563ebeb6..0000000000
--- a/target/linux/generic/backport-4.9/061-v4.10-0002-mtd-spi-nor-fix-spansion-quad-enable.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 807c16253319ee6ccf8873ae64f070f7eb532cd5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Jo=C3=ABl=20Esponde?= <joel.esponde@honeywell.com>
-Date: Wed, 23 Nov 2016 12:47:40 +0100
-Subject: [PATCH] mtd: spi-nor: fix spansion quad enable
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With the S25FL127S nor flash part, each writing to the configuration
-register takes hundreds of ms. During that  time, no more accesses to
-the flash should be done (even reads).
-
-This commit adds a wait loop after the register writing until the flash
-finishes its work.
-
-This issue could make rootfs mounting fail when the latter was done too
-much closely to this quad enable bit setting step. And in this case, a
-driver as UBIFS may try to recover the filesystem and may broke it
-completely.
-
-Signed-off-by: Joël Esponde <joel.esponde@honeywell.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1269,6 +1269,13 @@ static int spansion_quad_enable(struct s
- 		return ret;
- 	}
- 
-+	ret = spi_nor_wait_till_ready(nor);
-+	if (ret) {
-+		dev_err(nor->dev,
-+			"timeout while writing configuration register\n");
-+		return ret;
-+	}
-+
- 	/* read back and check it */
- 	ret = read_cr(nor);
- 	if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
diff --git a/target/linux/generic/backport-4.9/061-v4.10-0003-mtd-spi-nor-fix-flags-for-s25fl128s.patch b/target/linux/generic/backport-4.9/061-v4.10-0003-mtd-spi-nor-fix-flags-for-s25fl128s.patch
deleted file mode 100644
index 76c5d2d971..0000000000
--- a/target/linux/generic/backport-4.9/061-v4.10-0003-mtd-spi-nor-fix-flags-for-s25fl128s.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 4287916d7bab2806305d3296b4cf261fa49d959b Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Thu, 27 Oct 2016 23:13:26 +0200
-Subject: [PATCH] mtd: spi-nor: fix flags for s25fl128s
-
-The Spansion S25FL128S also supports dual read mode.
-In addition remove flag SECT_4K. 4K erases are supported,
-but not uniformly.
-
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Reviewed-by: Jagan Teki <jteki@openedev.com>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -912,7 +912,7 @@ static const struct flash_info spi_nor_i
- 	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
- 	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
- 	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
--	{ "s25fl128s",	INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
-+	{ "s25fl128s",	INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
diff --git a/target/linux/generic/backport-4.9/061-v4.10-0004-mtd-spi-nor-add-support-for-s25fl208k.patch b/target/linux/generic/backport-4.9/061-v4.10-0004-mtd-spi-nor-add-support-for-s25fl208k.patch
deleted file mode 100644
index 004c1c5151..0000000000
--- a/target/linux/generic/backport-4.9/061-v4.10-0004-mtd-spi-nor-add-support-for-s25fl208k.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 022a400f90ceeb26405edd5e077d56e2f38c8123 Mon Sep 17 00:00:00 2001
-From: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
-Date: Wed, 5 Oct 2016 10:59:49 +0200
-Subject: [PATCH] mtd: spi-nor: add support for s25fl208k
-
-Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
-Acked-by: Marek Vasut <marex@denx.de>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -928,6 +928,7 @@ static const struct flash_info spi_nor_i
- 	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64, SECT_4K) },
- 	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128, SECT_4K) },
- 	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8, SECT_4K | SPI_NOR_DUAL_READ) },
-+	{ "s25fl208k",  INFO(0x014014,      0,  64 * 1024,  16, SECT_4K | SPI_NOR_DUAL_READ) },
- 
- 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
- 	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
diff --git a/target/linux/generic/backport-4.9/061-v4.10-0005-mtd-spi-nor-Add-at25df321-spi-nor-flash-support.patch b/target/linux/generic/backport-4.9/061-v4.10-0005-mtd-spi-nor-Add-at25df321-spi-nor-flash-support.patch
deleted file mode 100644
index b97d8c7857..0000000000
--- a/target/linux/generic/backport-4.9/061-v4.10-0005-mtd-spi-nor-Add-at25df321-spi-nor-flash-support.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From b08618c929b289699a496b8d45a4e1a014187e56 Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jteki@openedev.com>
-Date: Tue, 26 Jul 2016 14:07:54 +0530
-Subject: [PATCH] mtd: spi-nor: Add at25df321 spi-nor flash support
-
-Add Atmel at25df321 spi-nor flash to the list of spi_nor_ids.
-
-Cc: Brian Norris <computersforpeace@gmail.com>
-Cc: Wenyou Yang <wenyou.yang@atmel.com>
-Signed-off-by: Jagan Teki <jteki@openedev.com>
-Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -799,6 +799,7 @@ static const struct flash_info spi_nor_i
- 	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
- 
- 	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
-+	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
- 
diff --git a/target/linux/generic/backport-4.9/061-v4.10-0006-mtd-spi-nor-Add-support-for-N25Q016A.patch b/target/linux/generic/backport-4.9/061-v4.10-0006-mtd-spi-nor-Add-support-for-N25Q016A.patch
deleted file mode 100644
index 8df61f6ed2..0000000000
--- a/target/linux/generic/backport-4.9/061-v4.10-0006-mtd-spi-nor-Add-support-for-N25Q016A.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 61e4611864b396c7e9040b7335f25d3921bc87cd Mon Sep 17 00:00:00 2001
-From: Moritz Fischer <moritz.fischer@ettus.com>
-Date: Fri, 15 Jul 2016 10:03:48 -0700
-Subject: [PATCH] mtd: spi-nor: Add support for N25Q016A
-
-This commit adds support in the spi-nor driver for the
-N25Q016A, a 16Mbit SPI NOR flash from Micron.
-
-Cc: David Woodhouse <dwmw2@infradead.org>
-Cc: Brian Norris <computersforpeace@gmail.com>
-Cc: Jagan Teki <jteki@openedev.com>
-
-Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
-Reviewed-by: Jagan Teki <jteki@openedev.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -885,6 +885,7 @@ static const struct flash_info spi_nor_i
- 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
- 
- 	/* Micron */
-+	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32, SECT_4K | SPI_NOR_QUAD_READ) },
- 	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
- 	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
- 	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
diff --git a/target/linux/generic/backport-4.9/061-v4.10-0007-mtd-spi-nor-Add-support-for-mr25h40.patch b/target/linux/generic/backport-4.9/061-v4.10-0007-mtd-spi-nor-Add-support-for-mr25h40.patch
deleted file mode 100644
index 3bae77db7c..0000000000
--- a/target/linux/generic/backport-4.9/061-v4.10-0007-mtd-spi-nor-Add-support-for-mr25h40.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From edd0c8f4932dbf3e21036cb443ba5bdf7449d02b Mon Sep 17 00:00:00 2001
-From: IWAMOTO Masahiko <iwamoto@allied-telesis.co.jp>
-Date: Wed, 5 Oct 2016 08:22:52 +0000
-Subject: [PATCH] mtd: spi-nor: Add support for mr25h40
-
-Add Everspin mr25h40 512KB MRAM to the list of supported chips.
-
-Signed-off-by: Masahiko Iwamoto <iwamoto@allied-telesis.co.jp>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
-Acked-by: Marek Vasut <marex@denx.de>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -826,6 +826,7 @@ static const struct flash_info spi_nor_i
- 	/* Everspin */
- 	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- 	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+	{ "mr25h40",  CAT25_INFO(512 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- 
- 	/* Fujitsu */
- 	{ "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
diff --git a/target/linux/generic/backport-4.9/062-v4.11-0001-mtd-spi-nor-Add-support-for-S3AN-spi-nor-devices.patch b/target/linux/generic/backport-4.9/062-v4.11-0001-mtd-spi-nor-Add-support-for-S3AN-spi-nor-devices.patch
deleted file mode 100644
index a174984921..0000000000
--- a/target/linux/generic/backport-4.9/062-v4.11-0001-mtd-spi-nor-Add-support-for-S3AN-spi-nor-devices.patch
+++ /dev/null
@@ -1,312 +0,0 @@
-From 61cba34bd6c1bddfc38f94cc3f80bdfefcc3393b Mon Sep 17 00:00:00 2001
-From: Ricardo Ribalda <ricardo.ribalda@gmail.com>
-Date: Fri, 2 Dec 2016 12:31:44 +0100
-Subject: [PATCH] mtd: spi-nor: Add support for S3AN spi-nor devices
-
-Xilinx Spartan-3AN FPGAs contain an In-System Flash where they keep
-their configuration data and (optionally) some user data.
-
-The protocol of this flash follows most of the spi-nor standard. With
-the following differences:
-
-- Page size might not be a power of two.
-- The address calculation (default addressing mode).
-- The spi nor commands used.
-
-Protocol is described on Xilinx User Guide UG333
-
-Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
-Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
-Cc: Brian Norris <computersforpeace@gmail.com>
-Cc: Marek Vasut <marek.vasut@gmail.com>
-Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 154 ++++++++++++++++++++++++++++++++++++++++--
- include/linux/mtd/spi-nor.h   |  12 ++++
- 2 files changed, 161 insertions(+), 5 deletions(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -75,6 +75,12 @@ struct flash_info {
- 					 * bit. Must be used with
- 					 * SPI_NOR_HAS_LOCK.
- 					 */
-+#define	SPI_S3AN		BIT(10)	/*
-+					 * Xilinx Spartan 3AN In-System Flash
-+					 * (MFR cannot be used for probing
-+					 * because it has the same value as
-+					 * ATMEL flashes)
-+					*/
- };
- 
- #define JEDEC_MFR(info)	((info)->id[0])
-@@ -217,6 +223,21 @@ static inline int set_4byte(struct spi_n
- 		return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1);
- 	}
- }
-+
-+static int s3an_sr_ready(struct spi_nor *nor)
-+{
-+	int ret;
-+	u8 val;
-+
-+	ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
-+	if (ret < 0) {
-+		dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
-+		return ret;
-+	}
-+
-+	return !!(val & XSR_RDY);
-+}
-+
- static inline int spi_nor_sr_ready(struct spi_nor *nor)
- {
- 	int sr = read_sr(nor);
-@@ -238,7 +259,11 @@ static inline int spi_nor_fsr_ready(stru
- static int spi_nor_ready(struct spi_nor *nor)
- {
- 	int sr, fsr;
--	sr = spi_nor_sr_ready(nor);
-+
-+	if (nor->flags & SNOR_F_READY_XSR_RDY)
-+		sr = s3an_sr_ready(nor);
-+	else
-+		sr = spi_nor_sr_ready(nor);
- 	if (sr < 0)
- 		return sr;
- 	fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
-@@ -320,6 +345,24 @@ static void spi_nor_unlock_and_unprep(st
- }
- 
- /*
-+ * This code converts an address to the Default Address Mode, that has non
-+ * power of two page sizes. We must support this mode because it is the default
-+ * mode supported by Xilinx tools, it can access the whole flash area and
-+ * changing over to the Power-of-two mode is irreversible and corrupts the
-+ * original data.
-+ * Addr can safely be unsigned int, the biggest S3AN device is smaller than
-+ * 4 MiB.
-+ */
-+static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
-+{
-+	unsigned int offset = addr;
-+
-+	offset %= nor->page_size;
-+
-+	return ((addr - offset) << 1) | offset;
-+}
-+
-+/*
-  * Initiate the erasure of a single sector
-  */
- static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
-@@ -327,6 +370,9 @@ static int spi_nor_erase_sector(struct s
- 	u8 buf[SPI_NOR_MAX_ADDR_WIDTH];
- 	int i;
- 
-+	if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
-+		addr = spi_nor_s3an_addr_convert(nor, addr);
-+
- 	if (nor->erase)
- 		return nor->erase(nor, addr);
- 
-@@ -368,7 +414,7 @@ static int spi_nor_erase(struct mtd_info
- 		return ret;
- 
- 	/* whole-chip erase? */
--	if (len == mtd->size) {
-+	if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
- 		unsigned long timeout;
- 
- 		write_enable(nor);
-@@ -782,6 +828,19 @@ static int spi_nor_is_locked(struct mtd_
- 		.addr_width = (_addr_width),				\
- 		.flags = (_flags),
- 
-+#define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
-+		.id = {							\
-+			((_jedec_id) >> 16) & 0xff,			\
-+			((_jedec_id) >> 8) & 0xff,			\
-+			(_jedec_id) & 0xff				\
-+			},						\
-+		.id_len = 3,						\
-+		.sector_size = (8*_page_size),				\
-+		.n_sectors = (_n_sectors),				\
-+		.page_size = _page_size,				\
-+		.addr_width = 3,					\
-+		.flags = SPI_NOR_NO_FR | SPI_S3AN,
-+
- /* NOTE: double check command sets and memory organization when you add
-  * more nor chips.  This current list focusses on newer chips, which
-  * have been converging on command sets which including JEDEC ID.
-@@ -1020,6 +1079,13 @@ static const struct flash_info spi_nor_i
- 	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- 	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- 	{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-+
-+	/* Xilinx S3AN Internal Flash */
-+	{ "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
-+	{ "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
-+	{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
-+	{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
-+	{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
- 	{ },
- };
- 
-@@ -1060,7 +1126,12 @@ static int spi_nor_read(struct mtd_info
- 		return ret;
- 
- 	while (len) {
--		ret = nor->read(nor, from, len, buf);
-+		loff_t addr = from;
-+
-+		if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
-+			addr = spi_nor_s3an_addr_convert(nor, addr);
-+
-+		ret = nor->read(nor, addr, len, buf);
- 		if (ret == 0) {
- 			/* We shouldn't see 0-length reads */
- 			ret = -EIO;
-@@ -1181,8 +1252,23 @@ static int spi_nor_write(struct mtd_info
- 
- 	for (i = 0; i < len; ) {
- 		ssize_t written;
-+		loff_t addr = to + i;
- 
--		page_offset = (to + i) & (nor->page_size - 1);
-+		/*
-+		 * If page_size is a power of two, the offset can be quickly
-+		 * calculated with an AND operation. On the other cases we
-+		 * need to do a modulus operation (more expensive).
-+		 * Power of two numbers have only one bit set and we can use
-+		 * the instruction hweight32 to detect if we need to do a
-+		 * modulus (do_div()) or not.
-+		 */
-+		if (hweight32(nor->page_size) == 1) {
-+			page_offset = addr & (nor->page_size - 1);
-+		} else {
-+			uint64_t aux = addr;
-+
-+			page_offset = do_div(aux, nor->page_size);
-+		}
- 		WARN_ONCE(page_offset,
- 			  "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.",
- 			  page_offset);
-@@ -1190,8 +1276,11 @@ static int spi_nor_write(struct mtd_info
- 		page_remain = min_t(size_t,
- 				    nor->page_size - page_offset, len - i);
- 
-+		if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
-+			addr = spi_nor_s3an_addr_convert(nor, addr);
-+
- 		write_enable(nor);
--		ret = nor->write(nor, to + i, page_remain, buf + i);
-+		ret = nor->write(nor, addr, page_remain, buf + i);
- 		if (ret < 0)
- 			goto write_err;
- 		written = ret;
-@@ -1325,6 +1414,47 @@ static int spi_nor_check(struct spi_nor
- 	return 0;
- }
- 
-+static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor)
-+{
-+	int ret;
-+	u8 val;
-+
-+	ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
-+	if (ret < 0) {
-+		dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
-+		return ret;
-+	}
-+
-+	nor->erase_opcode = SPINOR_OP_XSE;
-+	nor->program_opcode = SPINOR_OP_XPP;
-+	nor->read_opcode = SPINOR_OP_READ;
-+	nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-+
-+	/*
-+	 * This flashes have a page size of 264 or 528 bytes (known as
-+	 * Default addressing mode). It can be changed to a more standard
-+	 * Power of two mode where the page size is 256/512. This comes
-+	 * with a price: there is 3% less of space, the data is corrupted
-+	 * and the page size cannot be changed back to default addressing
-+	 * mode.
-+	 *
-+	 * The current addressing mode can be read from the XRDSR register
-+	 * and should not be changed, because is a destructive operation.
-+	 */
-+	if (val & XSR_PAGESIZE) {
-+		/* Flash in Power of 2 mode */
-+		nor->page_size = (nor->page_size == 264) ? 256 : 512;
-+		nor->mtd.writebufsize = nor->page_size;
-+		nor->mtd.size = 8 * nor->page_size * info->n_sectors;
-+		nor->mtd.erasesize = 8 * nor->page_size;
-+	} else {
-+		/* Flash in Default addressing mode */
-+		nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT;
-+	}
-+
-+	return 0;
-+}
-+
- int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
- {
- 	const struct flash_info *info = NULL;
-@@ -1373,6 +1503,14 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	mutex_init(&nor->lock);
- 
- 	/*
-+	 * Make sure the XSR_RDY flag is set before calling
-+	 * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
-+	 * with Atmel spi-nor
-+	 */
-+	if (info->flags & SPI_S3AN)
-+		nor->flags |=  SNOR_F_READY_XSR_RDY;
-+
-+	/*
- 	 * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
- 	 * with the software protection bits set
- 	 */
-@@ -1530,6 +1668,12 @@ int spi_nor_scan(struct spi_nor *nor, co
- 
- 	nor->read_dummy = spi_nor_read_dummy_cycles(nor);
- 
-+	if (info->flags & SPI_S3AN) {
-+		ret = s3an_nor_scan(info, nor);
-+		if (ret)
-+			return ret;
-+	}
-+
- 	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
- 			(long long)mtd->size >> 10);
- 
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -68,6 +68,15 @@
- #define SPINOR_OP_WRDI		0x04	/* Write disable */
- #define SPINOR_OP_AAI_WP	0xad	/* Auto address increment word program */
- 
-+/* Used for S3AN flashes only */
-+#define SPINOR_OP_XSE		0x50	/* Sector erase */
-+#define SPINOR_OP_XPP		0x82	/* Page program */
-+#define SPINOR_OP_XRDSR		0xd7	/* Read status register */
-+
-+#define XSR_PAGESIZE		BIT(0)	/* Page size in Po2 or Linear */
-+#define XSR_RDY			BIT(7)	/* Ready */
-+
-+
- /* Used for Macronix and Winbond flashes. */
- #define SPINOR_OP_EN4B		0xb7	/* Enter 4-byte mode */
- #define SPINOR_OP_EX4B		0xe9	/* Exit 4-byte mode */
-@@ -119,6 +128,9 @@ enum spi_nor_ops {
- enum spi_nor_option_flags {
- 	SNOR_F_USE_FSR		= BIT(0),
- 	SNOR_F_HAS_SR_TB	= BIT(1),
-+	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
-+	SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
-+	SNOR_F_READY_XSR_RDY	= BIT(4),
- };
- 
- /**
diff --git a/target/linux/generic/backport-4.9/062-v4.11-0002-mtd-spi-nor-improve-macronix_quad_enable.patch b/target/linux/generic/backport-4.9/062-v4.11-0002-mtd-spi-nor-improve-macronix_quad_enable.patch
deleted file mode 100644
index ec469d405b..0000000000
--- a/target/linux/generic/backport-4.9/062-v4.11-0002-mtd-spi-nor-improve-macronix_quad_enable.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 1e99d0d51ec97bf48edd277658004ce030543d98 Mon Sep 17 00:00:00 2001
-From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-Date: Tue, 6 Dec 2016 17:01:41 +0100
-Subject: [PATCH] mtd: spi-nor: improve macronix_quad_enable()
-
-The patch checks whether the Quad Enable bit is already set in the Status
-Register. If so, the function exits immediately with a successful return
-code.
-
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-Reviewed-by: Jagan Teki <jagan@openedev.com>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1311,6 +1311,9 @@ static int macronix_quad_enable(struct s
- 	val = read_sr(nor);
- 	if (val < 0)
- 		return val;
-+	if (val & SR_QUAD_EN_MX)
-+		return 0;
-+
- 	write_enable(nor);
- 
- 	write_sr(nor, val | SR_QUAD_EN_MX);
diff --git a/target/linux/generic/backport-4.9/062-v4.11-0003-mtd-spi-nor-remove-WARN_ONCE-message-in-spi_nor_writ.patch b/target/linux/generic/backport-4.9/062-v4.11-0003-mtd-spi-nor-remove-WARN_ONCE-message-in-spi_nor_writ.patch
deleted file mode 100644
index 790b557611..0000000000
--- a/target/linux/generic/backport-4.9/062-v4.11-0003-mtd-spi-nor-remove-WARN_ONCE-message-in-spi_nor_writ.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From dc176595bf184e89bf28fdf91cbc1d050dfe63b3 Mon Sep 17 00:00:00 2001
-From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-Date: Tue, 6 Dec 2016 18:14:24 +0100
-Subject: [PATCH] mtd: spi-nor: remove WARN_ONCE() message in spi_nor_write()
-
-This patch removes the WARN_ONCE() test in spi_nor_write().
-This macro triggers the display of a warning message almost every time we
-use a UBI file-system because a write operation is performed at offset 64,
-which is in the middle of the SPI NOR memory page. This is a valid
-operation for ubifs.
-
-Hence this warning is pretty annoying and useless so we just remove it.
-
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-Suggested-by: Richard Weinberger <richard@nod.at>
-Suggested-by: Andras Szemzo <szemzo.andras@gmail.com>
-Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1269,9 +1269,6 @@ static int spi_nor_write(struct mtd_info
- 
- 			page_offset = do_div(aux, nor->page_size);
- 		}
--		WARN_ONCE(page_offset,
--			  "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.",
--			  page_offset);
- 		/* the size of data remaining on the first page */
- 		page_remain = min_t(size_t,
- 				    nor->page_size - page_offset, len - i);
diff --git a/target/linux/generic/backport-4.9/062-v4.11-0004-mtd-spi-nor-rename-SPINOR_OP_-macros-of-the-4-byte-a.patch b/target/linux/generic/backport-4.9/062-v4.11-0004-mtd-spi-nor-rename-SPINOR_OP_-macros-of-the-4-byte-a.patch
deleted file mode 100644
index 34562e197c..0000000000
--- a/target/linux/generic/backport-4.9/062-v4.11-0004-mtd-spi-nor-rename-SPINOR_OP_-macros-of-the-4-byte-a.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From 05aba5763dcf35eddc58aaf99c9f16d19730e0a8 Mon Sep 17 00:00:00 2001
-From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-Date: Thu, 27 Oct 2016 11:55:39 +0200
-Subject: [PATCH] mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address
- op codes
-
-This patch renames the SPINOR_OP_* macros of the 4-byte address
-instruction set so the new names all share a common pattern: the 4-byte
-address name is built from the 3-byte address name appending the "_4B"
-suffix.
-
-The patch also introduces new op codes to support other SPI protocols such
-as SPI 1-4-4 and SPI 1-2-2.
-
-This is a transitional patch and will help a later patch of spi-nor.c
-to automate the translation from the 3-byte address op codes into their
-4-byte address version.
-
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-Acked-by: Mark Brown <broonie@kernel.org>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
----
- drivers/mtd/devices/serial_flash_cmds.h |  7 -------
- drivers/mtd/devices/st_spi_fsm.c        | 28 ++++++++++++++--------------
- drivers/mtd/spi-nor/spi-nor.c           |  8 ++++----
- drivers/spi/spi-bcm-qspi.c              |  6 +++---
- include/linux/mtd/spi-nor.h             | 22 ++++++++++++++++------
- 5 files changed, 37 insertions(+), 34 deletions(-)
-
---- a/drivers/mtd/devices/serial_flash_cmds.h
-+++ b/drivers/mtd/devices/serial_flash_cmds.h
-@@ -18,19 +18,12 @@
- #define SPINOR_OP_RDVCR		0x85
- 
- /* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
--#define SPINOR_OP_READ_1_2_2	0xbb	/* DUAL I/O READ */
--#define SPINOR_OP_READ_1_4_4	0xeb	/* QUAD I/O READ */
--
- #define SPINOR_OP_WRITE		0x02	/* PAGE PROGRAM */
- #define SPINOR_OP_WRITE_1_1_2	0xa2	/* DUAL INPUT PROGRAM */
- #define SPINOR_OP_WRITE_1_2_2	0xd2	/* DUAL INPUT EXT PROGRAM */
- #define SPINOR_OP_WRITE_1_1_4	0x32	/* QUAD INPUT PROGRAM */
- #define SPINOR_OP_WRITE_1_4_4	0x12	/* QUAD INPUT EXT PROGRAM */
- 
--/* READ commands with 32-bit addressing */
--#define SPINOR_OP_READ4_1_2_2	0xbc
--#define SPINOR_OP_READ4_1_4_4	0xec
--
- /* Configuration flags */
- #define FLASH_FLAG_SINGLE	0x000000ff
- #define FLASH_FLAG_READ_WRITE	0x00000001
---- a/drivers/mtd/devices/st_spi_fsm.c
-+++ b/drivers/mtd/devices/st_spi_fsm.c
-@@ -507,13 +507,13 @@ static struct seq_rw_config n25q_read3_c
-  *	- 'FAST' variants configured for 8 dummy cycles (see note above.)
-  */
- static struct seq_rw_config n25q_read4_configs[] = {
--	{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4,	0, 4, 4, 0x00, 0, 8},
--	{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4,	0, 1, 4, 0x00, 0, 8},
--	{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2,	0, 2, 2, 0x00, 0, 8},
--	{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2,	0, 1, 2, 0x00, 0, 8},
--	{FLASH_FLAG_READ_FAST,	SPINOR_OP_READ4_FAST,	0, 1, 1, 0x00, 0, 8},
--	{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4,	0, 1, 1, 0x00, 0, 0},
--	{0x00,			0,			0, 0, 0, 0x00, 0, 0},
-+	{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 0, 8},
-+	{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8},
-+	{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 0, 8},
-+	{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8},
-+	{FLASH_FLAG_READ_FAST,	SPINOR_OP_READ_FAST_4B,  0, 1, 1, 0x00, 0, 8},
-+	{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B,       0, 1, 1, 0x00, 0, 0},
-+	{0x00,			0,                       0, 0, 0, 0x00, 0, 0},
- };
- 
- /*
-@@ -553,13 +553,13 @@ static int stfsm_mx25_en_32bit_addr_seq(
-  * entering a state that is incompatible with the SPIBoot Controller.
-  */
- static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
--	{FLASH_FLAG_READ_1_4_4,  SPINOR_OP_READ4_1_4_4,  0, 4, 4, 0x00, 2, 4},
--	{FLASH_FLAG_READ_1_1_4,  SPINOR_OP_READ4_1_1_4,  0, 1, 4, 0x00, 0, 8},
--	{FLASH_FLAG_READ_1_2_2,  SPINOR_OP_READ4_1_2_2,  0, 2, 2, 0x00, 4, 0},
--	{FLASH_FLAG_READ_1_1_2,  SPINOR_OP_READ4_1_1_2,  0, 1, 2, 0x00, 0, 8},
--	{FLASH_FLAG_READ_FAST,   SPINOR_OP_READ4_FAST,   0, 1, 1, 0x00, 0, 8},
--	{FLASH_FLAG_READ_WRITE,  SPINOR_OP_READ4,        0, 1, 1, 0x00, 0, 0},
--	{0x00,                   0,                      0, 0, 0, 0x00, 0, 0},
-+	{FLASH_FLAG_READ_1_4_4,  SPINOR_OP_READ_1_4_4_4B,  0, 4, 4, 0x00, 2, 4},
-+	{FLASH_FLAG_READ_1_1_4,  SPINOR_OP_READ_1_1_4_4B,  0, 1, 4, 0x00, 0, 8},
-+	{FLASH_FLAG_READ_1_2_2,  SPINOR_OP_READ_1_2_2_4B,  0, 2, 2, 0x00, 4, 0},
-+	{FLASH_FLAG_READ_1_1_2,  SPINOR_OP_READ_1_1_2_4B,  0, 1, 2, 0x00, 0, 8},
-+	{FLASH_FLAG_READ_FAST,   SPINOR_OP_READ_FAST_4B,   0, 1, 1, 0x00, 0, 8},
-+	{FLASH_FLAG_READ_WRITE,  SPINOR_OP_READ_4B,        0, 1, 1, 0x00, 0, 0},
-+	{0x00,                   0,                        0, 0, 0, 0x00, 0, 0},
- };
- 
- static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1638,16 +1638,16 @@ int spi_nor_scan(struct spi_nor *nor, co
- 			/* Dedicated 4-byte command set */
- 			switch (nor->flash_read) {
- 			case SPI_NOR_QUAD:
--				nor->read_opcode = SPINOR_OP_READ4_1_1_4;
-+				nor->read_opcode = SPINOR_OP_READ_1_1_4_4B;
- 				break;
- 			case SPI_NOR_DUAL:
--				nor->read_opcode = SPINOR_OP_READ4_1_1_2;
-+				nor->read_opcode = SPINOR_OP_READ_1_1_2_4B;
- 				break;
- 			case SPI_NOR_FAST:
--				nor->read_opcode = SPINOR_OP_READ4_FAST;
-+				nor->read_opcode = SPINOR_OP_READ_FAST_4B;
- 				break;
- 			case SPI_NOR_NORMAL:
--				nor->read_opcode = SPINOR_OP_READ4;
-+				nor->read_opcode = SPINOR_OP_READ_4B;
- 				break;
- 			}
- 			nor->program_opcode = SPINOR_OP_PP_4B;
---- a/drivers/spi/spi-bcm-qspi.c
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -371,7 +371,7 @@ static int bcm_qspi_bspi_set_flex_mode(s
- 			/* default mode, does not need flex_cmd */
- 			flex_mode = 0;
- 		else
--			command = SPINOR_OP_READ4_FAST;
-+			command = SPINOR_OP_READ_FAST_4B;
- 		break;
- 	case SPI_NBITS_DUAL:
- 		bpc = 0x00000001;
-@@ -384,7 +384,7 @@ static int bcm_qspi_bspi_set_flex_mode(s
- 		} else {
- 			command = SPINOR_OP_READ_1_1_2;
- 			if (spans_4byte)
--				command = SPINOR_OP_READ4_1_1_2;
-+				command = SPINOR_OP_READ_1_1_2_4B;
- 		}
- 		break;
- 	case SPI_NBITS_QUAD:
-@@ -399,7 +399,7 @@ static int bcm_qspi_bspi_set_flex_mode(s
- 		} else {
- 			command = SPINOR_OP_READ_1_1_4;
- 			if (spans_4byte)
--				command = SPINOR_OP_READ4_1_1_4;
-+				command = SPINOR_OP_READ_1_1_4_4B;
- 		}
- 		break;
- 	default:
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -43,9 +43,13 @@
- #define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
- #define SPINOR_OP_READ		0x03	/* Read data bytes (low frequency) */
- #define SPINOR_OP_READ_FAST	0x0b	/* Read data bytes (high frequency) */
--#define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual SPI) */
--#define SPINOR_OP_READ_1_1_4	0x6b	/* Read data bytes (Quad SPI) */
-+#define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual Output SPI) */
-+#define SPINOR_OP_READ_1_2_2	0xbb	/* Read data bytes (Dual I/O SPI) */
-+#define SPINOR_OP_READ_1_1_4	0x6b	/* Read data bytes (Quad Output SPI) */
-+#define SPINOR_OP_READ_1_4_4	0xeb	/* Read data bytes (Quad I/O SPI) */
- #define SPINOR_OP_PP		0x02	/* Page program (up to 256 bytes) */
-+#define SPINOR_OP_PP_1_1_4	0x32	/* Quad page program */
-+#define SPINOR_OP_PP_1_4_4	0x38	/* Quad page program */
- #define SPINOR_OP_BE_4K		0x20	/* Erase 4KiB block */
- #define SPINOR_OP_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips */
- #define SPINOR_OP_BE_32K	0x52	/* Erase 32KiB block */
-@@ -56,11 +60,17 @@
- #define SPINOR_OP_RDFSR		0x70	/* Read flag status register */
- 
- /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
--#define SPINOR_OP_READ4		0x13	/* Read data bytes (low frequency) */
--#define SPINOR_OP_READ4_FAST	0x0c	/* Read data bytes (high frequency) */
--#define SPINOR_OP_READ4_1_1_2	0x3c	/* Read data bytes (Dual SPI) */
--#define SPINOR_OP_READ4_1_1_4	0x6c	/* Read data bytes (Quad SPI) */
-+#define SPINOR_OP_READ_4B	0x13	/* Read data bytes (low frequency) */
-+#define SPINOR_OP_READ_FAST_4B	0x0c	/* Read data bytes (high frequency) */
-+#define SPINOR_OP_READ_1_1_2_4B	0x3c	/* Read data bytes (Dual Output SPI) */
-+#define SPINOR_OP_READ_1_2_2_4B	0xbc	/* Read data bytes (Dual I/O SPI) */
-+#define SPINOR_OP_READ_1_1_4_4B	0x6c	/* Read data bytes (Quad Output SPI) */
-+#define SPINOR_OP_READ_1_4_4_4B	0xec	/* Read data bytes (Quad I/O SPI) */
- #define SPINOR_OP_PP_4B		0x12	/* Page program (up to 256 bytes) */
-+#define SPINOR_OP_PP_1_1_4_4B	0x34	/* Quad page program */
-+#define SPINOR_OP_PP_1_4_4_4B	0x3e	/* Quad page program */
-+#define SPINOR_OP_BE_4K_4B	0x21	/* Erase 4KiB block */
-+#define SPINOR_OP_BE_32K_4B	0x5c	/* Erase 32KiB block */
- #define SPINOR_OP_SE_4B		0xdc	/* Sector erase (usually 64KiB) */
- 
- /* Used for SST flashes only. */
diff --git a/target/linux/generic/backport-4.9/062-v4.11-0005-mtd-spi-nor-add-a-stateless-method-to-support-memory.patch b/target/linux/generic/backport-4.9/062-v4.11-0005-mtd-spi-nor-add-a-stateless-method-to-support-memory.patch
deleted file mode 100644
index 1d507c1920..0000000000
--- a/target/linux/generic/backport-4.9/062-v4.11-0005-mtd-spi-nor-add-a-stateless-method-to-support-memory.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 3274ba26f27becfc4193ec6e229288140651f240 Mon Sep 17 00:00:00 2001
-From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-Date: Thu, 27 Oct 2016 12:03:57 +0200
-Subject: [PATCH] mtd: spi-nor: add a stateless method to support memory size
- above 128Mib
-
-This patch provides an alternative mean to support memory above 16MiB
-(128Mib) by replacing 3byte address op codes by their associated 4byte
-address versions.
-
-Using the dedicated 4byte address op codes doesn't change the internal
-state of the SPI NOR memory as opposed to using other means such as
-updating a Base Address Register (BAR) and sending command to enter/leave
-the 4byte mode.
-
-Hence when a CPU reset occurs, early bootloaders don't need to be aware
-of BAR value or 4byte mode being enabled: they can still access the first
-16MiB of the SPI NOR memory using the regular 3byte address op codes.
-
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-Tested-by: Vignesh R <vigneshr@ti.com>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 101 +++++++++++++++++++++++++++++++++---------
- 1 file changed, 80 insertions(+), 21 deletions(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -81,6 +81,10 @@ struct flash_info {
- 					 * because it has the same value as
- 					 * ATMEL flashes)
- 					*/
-+#define SPI_NOR_4B_OPCODES	BIT(11)	/*
-+					 * Use dedicated 4byte address op codes
-+					 * to support memory size above 128Mib.
-+					 */
- };
- 
- #define JEDEC_MFR(info)	((info)->id[0])
-@@ -194,6 +198,78 @@ static inline struct spi_nor *mtd_to_spi
- 	return mtd->priv;
- }
- 
-+
-+static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
-+{
-+	size_t i;
-+
-+	for (i = 0; i < size; i++)
-+		if (table[i][0] == opcode)
-+			return table[i][1];
-+
-+	/* No conversion found, keep input op code. */
-+	return opcode;
-+}
-+
-+static inline u8 spi_nor_convert_3to4_read(u8 opcode)
-+{
-+	static const u8 spi_nor_3to4_read[][2] = {
-+		{ SPINOR_OP_READ,	SPINOR_OP_READ_4B },
-+		{ SPINOR_OP_READ_FAST,	SPINOR_OP_READ_FAST_4B },
-+		{ SPINOR_OP_READ_1_1_2,	SPINOR_OP_READ_1_1_2_4B },
-+		{ SPINOR_OP_READ_1_2_2,	SPINOR_OP_READ_1_2_2_4B },
-+		{ SPINOR_OP_READ_1_1_4,	SPINOR_OP_READ_1_1_4_4B },
-+		{ SPINOR_OP_READ_1_4_4,	SPINOR_OP_READ_1_4_4_4B },
-+	};
-+
-+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
-+				      ARRAY_SIZE(spi_nor_3to4_read));
-+}
-+
-+static inline u8 spi_nor_convert_3to4_program(u8 opcode)
-+{
-+	static const u8 spi_nor_3to4_program[][2] = {
-+		{ SPINOR_OP_PP,		SPINOR_OP_PP_4B },
-+		{ SPINOR_OP_PP_1_1_4,	SPINOR_OP_PP_1_1_4_4B },
-+		{ SPINOR_OP_PP_1_4_4,	SPINOR_OP_PP_1_4_4_4B },
-+	};
-+
-+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
-+				      ARRAY_SIZE(spi_nor_3to4_program));
-+}
-+
-+static inline u8 spi_nor_convert_3to4_erase(u8 opcode)
-+{
-+	static const u8 spi_nor_3to4_erase[][2] = {
-+		{ SPINOR_OP_BE_4K,	SPINOR_OP_BE_4K_4B },
-+		{ SPINOR_OP_BE_32K,	SPINOR_OP_BE_32K_4B },
-+		{ SPINOR_OP_SE,		SPINOR_OP_SE_4B },
-+	};
-+
-+	return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase,
-+				      ARRAY_SIZE(spi_nor_3to4_erase));
-+}
-+
-+static void spi_nor_set_4byte_opcodes(struct spi_nor *nor,
-+				      const struct flash_info *info)
-+{
-+	/* Do some manufacturer fixups first */
-+	switch (JEDEC_MFR(info)) {
-+	case SNOR_MFR_SPANSION:
-+		/* No small sector erase for 4-byte command set */
-+		nor->erase_opcode = SPINOR_OP_SE;
-+		nor->mtd.erasesize = info->sector_size;
-+		break;
-+
-+	default:
-+		break;
-+	}
-+
-+	nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
-+	nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
-+	nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
-+}
-+
- /* Enable/disable 4-byte addressing mode. */
- static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
- 			    int enable)
-@@ -1634,27 +1710,10 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	else if (mtd->size > 0x1000000) {
- 		/* enable 4-byte addressing if the device exceeds 16MiB */
- 		nor->addr_width = 4;
--		if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) {
--			/* Dedicated 4-byte command set */
--			switch (nor->flash_read) {
--			case SPI_NOR_QUAD:
--				nor->read_opcode = SPINOR_OP_READ_1_1_4_4B;
--				break;
--			case SPI_NOR_DUAL:
--				nor->read_opcode = SPINOR_OP_READ_1_1_2_4B;
--				break;
--			case SPI_NOR_FAST:
--				nor->read_opcode = SPINOR_OP_READ_FAST_4B;
--				break;
--			case SPI_NOR_NORMAL:
--				nor->read_opcode = SPINOR_OP_READ_4B;
--				break;
--			}
--			nor->program_opcode = SPINOR_OP_PP_4B;
--			/* No small sector erase for 4-byte command set */
--			nor->erase_opcode = SPINOR_OP_SE_4B;
--			mtd->erasesize = info->sector_size;
--		} else
-+		if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
-+		    info->flags & SPI_NOR_4B_OPCODES)
-+			spi_nor_set_4byte_opcodes(nor, info);
-+		else
- 			set_4byte(nor, info, 1);
- 	} else {
- 		nor->addr_width = 3;
diff --git a/target/linux/generic/backport-4.9/062-v4.11-0006-mtd-spi-nor-Add-lock-unlock-support-for-f25l32pa.patch b/target/linux/generic/backport-4.9/062-v4.11-0006-mtd-spi-nor-Add-lock-unlock-support-for-f25l32pa.patch
deleted file mode 100644
index be78682193..0000000000
--- a/target/linux/generic/backport-4.9/062-v4.11-0006-mtd-spi-nor-Add-lock-unlock-support-for-f25l32pa.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 252c36bb9c7b98b356f033d16ea83d20fb8b4d3e Mon Sep 17 00:00:00 2001
-From: Victor Shyba <victor1984@riseup.net>
-Date: Mon, 2 Jan 2017 22:34:30 -0300
-Subject: [PATCH] mtd: spi-nor: Add lock/unlock support for f25l32pa
-
-This chip has write protection enabled on power-up,
-so this flag is necessary to support write operations.
-
-Signed-off-by: Victor Shyba <victor1984@riseup.net>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -956,7 +956,7 @@ static const struct flash_info spi_nor_i
- 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
- 
- 	/* ESMT */
--	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },
-+	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
- 
- 	/* Everspin */
- 	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
diff --git a/target/linux/generic/backport-4.9/062-v4.11-0007-mtd-spi-nor-Fix-S3AN-addressing-calculation.patch b/target/linux/generic/backport-4.9/062-v4.11-0007-mtd-spi-nor-Fix-S3AN-addressing-calculation.patch
deleted file mode 100644
index f8d0541428..0000000000
--- a/target/linux/generic/backport-4.9/062-v4.11-0007-mtd-spi-nor-Fix-S3AN-addressing-calculation.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 5f0e0758efddef5b06994a76d8c7f0b8a4c1daae Mon Sep 17 00:00:00 2001
-From: Ricardo Ribalda <ricardo.ribalda@gmail.com>
-Date: Wed, 18 Jan 2017 17:40:16 +0100
-Subject: [PATCH] mtd: spi-nor: Fix S3AN addressing calculation
-
-The page calculation under spi_nor_s3an_addr_convert() was wrong. On
-Default Address Mode we need to perform a divide by page_size.
-
-Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -431,11 +431,14 @@ static void spi_nor_unlock_and_unprep(st
-  */
- static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
- {
--	unsigned int offset = addr;
-+	unsigned int offset;
-+	unsigned int page;
- 
--	offset %= nor->page_size;
-+	offset = addr % nor->page_size;
-+	page = addr / nor->page_size;
-+	page <<= (nor->page_size > 512) ? 10 : 9;
- 
--	return ((addr - offset) << 1) | offset;
-+	return page | offset;
- }
- 
- /*
diff --git a/target/linux/generic/backport-4.9/062-v4.11-0008-mtd-spi-nor-Add-support-for-gd25q16.patch b/target/linux/generic/backport-4.9/062-v4.11-0008-mtd-spi-nor-Add-support-for-gd25q16.patch
deleted file mode 100644
index 5253957286..0000000000
--- a/target/linux/generic/backport-4.9/062-v4.11-0008-mtd-spi-nor-Add-support-for-gd25q16.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 4c5747a390acc9d1da3b332507c8bae7a8ddfc48 Mon Sep 17 00:00:00 2001
-From: Kamal Dasu <kdasu.kdev@gmail.com>
-Date: Fri, 20 Jan 2017 14:25:51 -0500
-Subject: [PATCH] mtd: spi-nor: Add support for gd25q16
-
-Add GigaDevice GD25Q16 (16M-bit) to supported list.
-
-Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -971,6 +971,11 @@ static const struct flash_info spi_nor_i
- 
- 	/* GigaDevice */
- 	{
-+		"gd25q16", INFO(0xc84015, 0, 64 * 1024,  32,
-+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+	},
-+	{
- 		"gd25q32", INFO(0xc84016, 0, 64 * 1024,  64,
- 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
diff --git a/target/linux/generic/backport-4.9/063-v4.11-0001-mtd-nand-Add-Winbond-manufacturer-id.patch b/target/linux/generic/backport-4.9/063-v4.11-0001-mtd-nand-Add-Winbond-manufacturer-id.patch
deleted file mode 100644
index cbab378b2b..0000000000
--- a/target/linux/generic/backport-4.9/063-v4.11-0001-mtd-nand-Add-Winbond-manufacturer-id.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From a4077ce5871304f8a78f80b74b18b6052a410f1a Mon Sep 17 00:00:00 2001
-From: "Andrey Jr. Melnikov" <temnota.am@gmail.com>
-Date: Thu, 8 Dec 2016 19:57:08 +0300
-Subject: [PATCH] mtd: nand: Add Winbond manufacturer id
-
-Add WINBOND manufacturer id.
-
-Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/mtd/nand/nand_ids.c | 1 +
- include/linux/mtd/nand.h    | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/drivers/mtd/nand/nand_ids.c
-+++ b/drivers/mtd/nand/nand_ids.c
-@@ -182,6 +182,7 @@ struct nand_manufacturers nand_manuf_ids
- 	{NAND_MFR_SANDISK, "SanDisk"},
- 	{NAND_MFR_INTEL, "Intel"},
- 	{NAND_MFR_ATO, "ATO"},
-+	{NAND_MFR_WINBOND, "Winbond"},
- 	{0x0, "Unknown"}
- };
- 
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -928,6 +928,7 @@ static inline void nand_set_controller_d
- #define NAND_MFR_SANDISK	0x45
- #define NAND_MFR_INTEL		0x89
- #define NAND_MFR_ATO		0x9b
-+#define NAND_MFR_WINBOND	0xef
- 
- /* The maximum expected count of bytes in the NAND ID sequence */
- #define NAND_MAX_ID_LEN 8
diff --git a/target/linux/generic/backport-4.9/063-v4.11-0002-mtd-introduce-function-max_bad_blocks.patch b/target/linux/generic/backport-4.9/063-v4.11-0002-mtd-introduce-function-max_bad_blocks.patch
deleted file mode 100644
index d2e582ef5b..0000000000
--- a/target/linux/generic/backport-4.9/063-v4.11-0002-mtd-introduce-function-max_bad_blocks.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 6080ef6e7c0a0592cbcca11200d879faf65e27d4 Mon Sep 17 00:00:00 2001
-From: Jeff Westfahl <jeff.westfahl@ni.com>
-Date: Tue, 10 Jan 2017 13:30:17 -0600
-Subject: [PATCH] mtd: introduce function max_bad_blocks
-
-If implemented, 'max_bad_blocks' returns the maximum number of bad
-blocks to reserve for a MTD. An implementation for NAND is coming soon.
-
-Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
-Signed-off-by: Zach Brown <zach.brown@ni.com>
-Acked-by: Boris Brezillon <boris.brezillon@free-electron.com>
-Acked-by: Brian Norris <computersforpeace@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c   | 10 ++++++++++
- include/linux/mtd/mtd.h | 13 +++++++++++++
- 2 files changed, 23 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -349,6 +349,14 @@ static const struct mtd_ooblayout_ops pa
- 	.free = part_ooblayout_free,
- };
- 
-+static int part_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
-+{
-+	struct mtd_part *part = mtd_to_part(mtd);
-+
-+	return part->master->_max_bad_blocks(part->master,
-+					     ofs + part->offset, len);
-+}
-+
- static inline void free_partition(struct mtd_part *p)
- {
- 	kfree(p->mtd.name);
-@@ -475,6 +483,8 @@ static struct mtd_part *allocate_partiti
- 		slave->mtd._block_isbad = part_block_isbad;
- 	if (master->_block_markbad)
- 		slave->mtd._block_markbad = part_block_markbad;
-+	if (master->_max_bad_blocks)
-+		slave->mtd._max_bad_blocks = part_max_bad_blocks;
- 
- 	if (master->_get_device)
- 		slave->mtd._get_device = part_get_device;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -322,6 +322,7 @@ struct mtd_info {
- 	int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs);
- 	int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
- 	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
-+	int (*_max_bad_blocks) (struct mtd_info *mtd, loff_t ofs, size_t len);
- 	int (*_suspend) (struct mtd_info *mtd);
- 	void (*_resume) (struct mtd_info *mtd);
- 	void (*_reboot) (struct mtd_info *mtd);
-@@ -397,6 +398,18 @@ static inline int mtd_oobavail(struct mt
- 	return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
- }
- 
-+static inline int mtd_max_bad_blocks(struct mtd_info *mtd,
-+				     loff_t ofs, size_t len)
-+{
-+	if (!mtd->_max_bad_blocks)
-+		return -ENOTSUPP;
-+
-+	if (mtd->size < (len + ofs) || ofs < 0)
-+		return -EINVAL;
-+
-+	return mtd->_max_bad_blocks(mtd, ofs, len);
-+}
-+
- int mtd_wunit_to_pairing_info(struct mtd_info *mtd, int wunit,
- 			      struct mtd_pairing_info *info);
- int mtd_pairing_info_to_wunit(struct mtd_info *mtd,
diff --git a/target/linux/generic/backport-4.9/063-v4.11-0003-mtd-Add-partition-device-node-to-mtd-partition-devic.patch b/target/linux/generic/backport-4.9/063-v4.11-0003-mtd-Add-partition-device-node-to-mtd-partition-devic.patch
deleted file mode 100644
index ea68fc474f..0000000000
--- a/target/linux/generic/backport-4.9/063-v4.11-0003-mtd-Add-partition-device-node-to-mtd-partition-devic.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 42e9401bd1467d22c4dc4d2c637347b874e6a80b Mon Sep 17 00:00:00 2001
-From: Sascha Hauer <s.hauer@pengutronix.de>
-Date: Thu, 9 Feb 2017 11:50:24 +0100
-Subject: [PATCH] mtd: Add partition device node to mtd partition devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The user visible change here is that mtd partitions get an of_node link
-in sysfs.
-
-Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c          | 1 +
- drivers/mtd/ofpart.c           | 1 +
- include/linux/mtd/partitions.h | 1 +
- 3 files changed, 3 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -432,6 +432,7 @@ static struct mtd_part *allocate_partiti
- 	slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) ?
- 				&master->dev :
- 				master->dev.parent;
-+	slave->mtd.dev.of_node = part->of_node;
- 
- 	slave->mtd._read = part_read;
- 	slave->mtd._write = part_write;
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -108,6 +108,7 @@ static int parse_ofpart_partitions(struc
- 
- 		parts[i].offset = of_read_number(reg, a_cells);
- 		parts[i].size = of_read_number(reg + a_cells, s_cells);
-+		parts[i].of_node = pp;
- 
- 		partname = of_get_property(pp, "label", &len);
- 		if (!partname)
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -41,6 +41,7 @@ struct mtd_partition {
- 	uint64_t size;			/* partition size */
- 	uint64_t offset;		/* offset within the master MTD space */
- 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
-+	struct device_node *of_node;
- };
- 
- #define MTDPART_OFS_RETAIN	(-3)
diff --git a/target/linux/generic/backport-4.9/064-v4.12-mtd-spi-nor-enable-stateless-4b-op-codes-for-mx25u25.patch b/target/linux/generic/backport-4.9/064-v4.12-mtd-spi-nor-enable-stateless-4b-op-codes-for-mx25u25.patch
deleted file mode 100644
index d1544b1d36..0000000000
--- a/target/linux/generic/backport-4.9/064-v4.12-mtd-spi-nor-enable-stateless-4b-op-codes-for-mx25u25.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From b0fcb4b413028376894feaaaf62bcb09ab1b52f2 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Thu, 13 Apr 2017 09:23:54 +0200
-Subject: [PATCH] mtd: spi-nor: enable stateless 4b op codes for mx25u25635f
-
-All required stateless 4-byte op codes are supported by this flash
-chip. The stateless 4-byte support can't be autodetected due to a
-missing 4-byte Address Instruction Table in SFDP.
-
-Fixes hangs on reboot for SoCs expecting the flash chip in 3byte mode.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
-Acked-by: Marek Vasut <marek.vasut@gmail.com>
-Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1023,7 +1023,7 @@ static const struct flash_info spi_nor_i
- 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
--	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K) },
-+	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
- 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
- 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
diff --git a/target/linux/generic/backport-4.9/065-v4.13-0001-mtd-handle-partitioning-on-devices-with-0-erasesize.patch b/target/linux/generic/backport-4.9/065-v4.13-0001-mtd-handle-partitioning-on-devices-with-0-erasesize.patch
deleted file mode 100644
index d912811850..0000000000
--- a/target/linux/generic/backport-4.9/065-v4.13-0001-mtd-handle-partitioning-on-devices-with-0-erasesize.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 1eeef2d7483a7e3f8d2dd2a5b9939b3b814dc549 Mon Sep 17 00:00:00 2001
-From: Chris Packham <chris.packham@alliedtelesis.co.nz>
-Date: Fri, 9 Jun 2017 15:58:31 +1200
-Subject: [PATCH] mtd: handle partitioning on devices with 0 erasesize
-
-erasesize is meaningful for flash devices but for SRAM there is no
-concept of an erase block so erasesize is set to 0. When partitioning
-these devices instead of ensuring partitions fall on erasesize
-boundaries we ensure they fall on writesize boundaries.
-
-Helped-by: Boris Brezillon <boris.brezillon@free-electrons.com>
-Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
-Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c | 26 +++++++++++++++++---------
- 1 file changed, 17 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -393,8 +393,12 @@ static struct mtd_part *allocate_partiti
- 			const struct mtd_partition *part, int partno,
- 			uint64_t cur_offset)
- {
-+	int wr_alignment = (master->flags & MTD_NO_ERASE) ? master->writesize:
-+							    master->erasesize;
- 	struct mtd_part *slave;
-+	u32 remainder;
- 	char *name;
-+	u64 tmp;
- 
- 	/* allocate the partition structure */
- 	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
-@@ -499,10 +503,11 @@ static struct mtd_part *allocate_partiti
- 	if (slave->offset == MTDPART_OFS_APPEND)
- 		slave->offset = cur_offset;
- 	if (slave->offset == MTDPART_OFS_NXTBLK) {
-+		tmp = cur_offset;
- 		slave->offset = cur_offset;
--		if (mtd_mod_by_eb(cur_offset, master) != 0) {
--			/* Round up to next erasesize */
--			slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
-+		remainder = do_div(tmp, wr_alignment);
-+		if (remainder) {
-+			slave->offset += wr_alignment - remainder;
- 			printk(KERN_NOTICE "Moving partition %d: "
- 			       "0x%012llx -> 0x%012llx\n", partno,
- 			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
-@@ -567,19 +572,22 @@ static struct mtd_part *allocate_partiti
- 		slave->mtd.erasesize = master->erasesize;
- 	}
- 
--	if ((slave->mtd.flags & MTD_WRITEABLE) &&
--	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
-+	tmp = slave->offset;
-+	remainder = do_div(tmp, wr_alignment);
-+	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- 		/* Doesn't start on a boundary of major erase size */
- 		/* FIXME: Let it be writable if it is on a boundary of
- 		 * _minor_ erase size though */
- 		slave->mtd.flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
-+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
- 			part->name);
- 	}
--	if ((slave->mtd.flags & MTD_WRITEABLE) &&
--	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
-+
-+	tmp = slave->mtd.size;
-+	remainder = do_div(tmp, wr_alignment);
-+	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- 		slave->mtd.flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
-+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
- 			part->name);
- 	}
- 
diff --git a/target/linux/generic/backport-4.9/065-v4.13-0002-mtd-partitions-factor-out-code-calling-parser.patch b/target/linux/generic/backport-4.9/065-v4.13-0002-mtd-partitions-factor-out-code-calling-parser.patch
deleted file mode 100644
index d312e081a9..0000000000
--- a/target/linux/generic/backport-4.9/065-v4.13-0002-mtd-partitions-factor-out-code-calling-parser.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 01f9c7240a900d5676a8496496f2974dd36996b1 Mon Sep 17 00:00:00 2001
-From: Brian Norris <computersforpeace@gmail.com>
-Date: Tue, 23 May 2017 07:30:20 +0200
-Subject: [PATCH] mtd: partitions: factor out code calling parser
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This code is going to be reused for parsers matched using OF so let's
-factor it out to make this easier.
-
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c | 33 ++++++++++++++++++++++++---------
- 1 file changed, 24 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -807,6 +807,27 @@ static const char * const default_mtd_pa
- 	NULL
- };
- 
-+static int mtd_part_do_parse(struct mtd_part_parser *parser,
-+			     struct mtd_info *master,
-+			     struct mtd_partitions *pparts,
-+			     struct mtd_part_parser_data *data)
-+{
-+	int ret;
-+
-+	ret = (*parser->parse_fn)(master, &pparts->parts, data);
-+	pr_debug("%s: parser %s: %i\n", master->name, parser->name, ret);
-+	if (ret <= 0)
-+		return ret;
-+
-+	pr_notice("%d %s partitions found on MTD device %s\n", ret,
-+		  parser->name, master->name);
-+
-+	pparts->nr_parts = ret;
-+	pparts->parser = parser;
-+
-+	return ret;
-+}
-+
- /**
-  * parse_mtd_partitions - parse MTD partitions
-  * @master: the master partition (describes whole MTD device)
-@@ -847,16 +868,10 @@ int parse_mtd_partitions(struct mtd_info
- 			 parser ? parser->name : NULL);
- 		if (!parser)
- 			continue;
--		ret = (*parser->parse_fn)(master, &pparts->parts, data);
--		pr_debug("%s: parser %s: %i\n",
--			 master->name, parser->name, ret);
--		if (ret > 0) {
--			printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
--			       ret, parser->name, master->name);
--			pparts->nr_parts = ret;
--			pparts->parser = parser;
-+		ret = mtd_part_do_parse(parser, master, pparts, data);
-+		/* Found partitions! */
-+		if (ret > 0)
- 			return 0;
--		}
- 		mtd_part_parser_put(parser);
- 		/*
- 		 * Stash the first error we see; only report it if no parser
diff --git a/target/linux/generic/backport-4.9/065-v4.13-0003-mtd-partitions-add-helper-for-deleting-partition.patch b/target/linux/generic/backport-4.9/065-v4.13-0003-mtd-partitions-add-helper-for-deleting-partition.patch
deleted file mode 100644
index d93f4ba4b5..0000000000
--- a/target/linux/generic/backport-4.9/065-v4.13-0003-mtd-partitions-add-helper-for-deleting-partition.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 08263a9ae664b24fa777d20b365601534842b236 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Jun 2017 08:26:42 +0200
-Subject: [PATCH] mtd: partitions: add helper for deleting partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are two similar functions handling deletion. One handles single
-partition and another the whole MTD flash device. They share (duplicate)
-some code so it makes sense to add a small helper for that part.
-
-Function del_mtd_partitions has been moved a bit to keep all deleting
-stuff together.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c | 75 +++++++++++++++++++++++++++++----------------------
- 1 file changed, 43 insertions(+), 32 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -363,32 +363,6 @@ static inline void free_partition(struct
- 	kfree(p);
- }
- 
--/*
-- * This function unregisters and destroy all slave MTD objects which are
-- * attached to the given master MTD object.
-- */
--
--int del_mtd_partitions(struct mtd_info *master)
--{
--	struct mtd_part *slave, *next;
--	int ret, err = 0;
--
--	mutex_lock(&mtd_partitions_mutex);
--	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
--		if (slave->master == master) {
--			ret = del_mtd_device(&slave->mtd);
--			if (ret < 0) {
--				err = ret;
--				continue;
--			}
--			list_del(&slave->list);
--			free_partition(slave);
--		}
--	mutex_unlock(&mtd_partitions_mutex);
--
--	return err;
--}
--
- static struct mtd_part *allocate_partition(struct mtd_info *master,
- 			const struct mtd_partition *part, int partno,
- 			uint64_t cur_offset)
-@@ -675,6 +649,48 @@ int mtd_add_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_add_partition);
- 
-+/**
-+ * __mtd_del_partition - delete MTD partition
-+ *
-+ * @priv: internal MTD struct for partition to be deleted
-+ *
-+ * This function must be called with the partitions mutex locked.
-+ */
-+static int __mtd_del_partition(struct mtd_part *priv)
-+{
-+	int err;
-+
-+	err = del_mtd_device(&priv->mtd);
-+	if (err)
-+		return err;
-+
-+	list_del(&priv->list);
-+	free_partition(priv);
-+
-+	return 0;
-+}
-+
-+/*
-+ * This function unregisters and destroy all slave MTD objects which are
-+ * attached to the given master MTD object.
-+ */
-+int del_mtd_partitions(struct mtd_info *master)
-+{
-+	struct mtd_part *slave, *next;
-+	int ret, err = 0;
-+
-+	mutex_lock(&mtd_partitions_mutex);
-+	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
-+		if (slave->master == master) {
-+			ret = __mtd_del_partition(slave);
-+			if (ret < 0)
-+				err = ret;
-+		}
-+	mutex_unlock(&mtd_partitions_mutex);
-+
-+	return err;
-+}
-+
- int mtd_del_partition(struct mtd_info *master, int partno)
- {
- 	struct mtd_part *slave, *next;
-@@ -686,12 +702,7 @@ int mtd_del_partition(struct mtd_info *m
- 		    (slave->mtd.index == partno)) {
- 			sysfs_remove_files(&slave->mtd.dev.kobj,
- 					   mtd_partition_attrs);
--			ret = del_mtd_device(&slave->mtd);
--			if (ret < 0)
--				break;
--
--			list_del(&slave->list);
--			free_partition(slave);
-+			ret = __mtd_del_partition(slave);
- 			break;
- 		}
- 	mutex_unlock(&mtd_partitions_mutex);
diff --git a/target/linux/generic/backport-4.9/065-v4.13-0004-mtd-partitions-remove-sysfs-files-when-deleting-all-.patch b/target/linux/generic/backport-4.9/065-v4.13-0004-mtd-partitions-remove-sysfs-files-when-deleting-all-.patch
deleted file mode 100644
index 0f1b502b70..0000000000
--- a/target/linux/generic/backport-4.9/065-v4.13-0004-mtd-partitions-remove-sysfs-files-when-deleting-all-.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From c5ceaba74083daf619bdb34d4871e297a177eebf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Jun 2017 08:26:43 +0200
-Subject: [PATCH] mtd: partitions: remove sysfs files when deleting all
- master's partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When support for sysfs "offset" file was added it missed to update the
-del_mtd_partitions function. It deletes partitions just like
-mtd_del_partition does so both should also take care of removing sysfs
-files.
-
-This change moves sysfs_remove_files call to the shared function to fix
-this issue.
-
-Fixes: a62c24d755291 ("mtd: part: Add sysfs variable for offset of partition")
-Cc: Dan Ehrenberg <dehrenberg@chromium.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -660,6 +660,8 @@ static int __mtd_del_partition(struct mt
- {
- 	int err;
- 
-+	sysfs_remove_files(&priv->mtd.dev.kobj, mtd_partition_attrs);
-+
- 	err = del_mtd_device(&priv->mtd);
- 	if (err)
- 		return err;
-@@ -700,8 +702,6 @@ int mtd_del_partition(struct mtd_info *m
- 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
- 		if ((slave->master == master) &&
- 		    (slave->mtd.index == partno)) {
--			sysfs_remove_files(&slave->mtd.dev.kobj,
--					   mtd_partition_attrs);
- 			ret = __mtd_del_partition(slave);
- 			break;
- 		}
diff --git a/target/linux/generic/backport-4.9/065-v4.13-0005-mtd-partitions-rename-master-to-the-parent-where-app.patch b/target/linux/generic/backport-4.9/065-v4.13-0005-mtd-partitions-rename-master-to-the-parent-where-app.patch
deleted file mode 100644
index 7951227654..0000000000
--- a/target/linux/generic/backport-4.9/065-v4.13-0005-mtd-partitions-rename-master-to-the-parent-where-app.patch
+++ /dev/null
@@ -1,606 +0,0 @@
-From 0a9d72b69da6d8dae1abd7990c6c4c749846ef3e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Jun 2017 08:26:44 +0200
-Subject: [PATCH] mtd: partitions: rename "master" to the "parent" where
- appropriate
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This prepares mtd subsystem for the new feature: subpartitions. In some
-cases flash device partition can be a container with extra subpartitions
-(volumes).
-
-So far there was a flat structure implemented. One master (flash device)
-could be partitioned into few partitions. Every partition got its master
-and it was enough to get things running.
-
-To support subpartitions we need to store pointer to the parent for each
-partition. This is required to implement more natural tree structure and
-handle all recursion and offsets calculation.
-
-To make code consistent this patch renamed "master" to the "parent" in
-places where we can be dealing with subpartitions.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c | 204 ++++++++++++++++++++++++++------------------------
- 1 file changed, 105 insertions(+), 99 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -37,10 +37,16 @@
- static LIST_HEAD(mtd_partitions);
- static DEFINE_MUTEX(mtd_partitions_mutex);
- 
--/* Our partition node structure */
-+/**
-+ * struct mtd_part - our partition node structure
-+ *
-+ * @mtd: struct holding partition details
-+ * @parent: parent mtd - flash device or another partition
-+ * @offset: partition offset relative to the *flash device*
-+ */
- struct mtd_part {
- 	struct mtd_info mtd;
--	struct mtd_info *master;
-+	struct mtd_info *parent;
- 	uint64_t offset;
- 	struct list_head list;
- };
-@@ -67,15 +73,15 @@ static int part_read(struct mtd_info *mt
- 	struct mtd_ecc_stats stats;
- 	int res;
- 
--	stats = part->master->ecc_stats;
--	res = part->master->_read(part->master, from + part->offset, len,
-+	stats = part->parent->ecc_stats;
-+	res = part->parent->_read(part->parent, from + part->offset, len,
- 				  retlen, buf);
- 	if (unlikely(mtd_is_eccerr(res)))
- 		mtd->ecc_stats.failed +=
--			part->master->ecc_stats.failed - stats.failed;
-+			part->parent->ecc_stats.failed - stats.failed;
- 	else
- 		mtd->ecc_stats.corrected +=
--			part->master->ecc_stats.corrected - stats.corrected;
-+			part->parent->ecc_stats.corrected - stats.corrected;
- 	return res;
- }
- 
-@@ -84,7 +90,7 @@ static int part_point(struct mtd_info *m
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 
--	return part->master->_point(part->master, from + part->offset, len,
-+	return part->parent->_point(part->parent, from + part->offset, len,
- 				    retlen, virt, phys);
- }
- 
-@@ -92,7 +98,7 @@ static int part_unpoint(struct mtd_info
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 
--	return part->master->_unpoint(part->master, from + part->offset, len);
-+	return part->parent->_unpoint(part->parent, from + part->offset, len);
- }
- 
- static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
-@@ -103,7 +109,7 @@ static unsigned long part_get_unmapped_a
- 	struct mtd_part *part = mtd_to_part(mtd);
- 
- 	offset += part->offset;
--	return part->master->_get_unmapped_area(part->master, len, offset,
-+	return part->parent->_get_unmapped_area(part->parent, len, offset,
- 						flags);
- }
- 
-@@ -132,7 +138,7 @@ static int part_read_oob(struct mtd_info
- 			return -EINVAL;
- 	}
- 
--	res = part->master->_read_oob(part->master, from + part->offset, ops);
-+	res = part->parent->_read_oob(part->parent, from + part->offset, ops);
- 	if (unlikely(res)) {
- 		if (mtd_is_bitflip(res))
- 			mtd->ecc_stats.corrected++;
-@@ -146,7 +152,7 @@ static int part_read_user_prot_reg(struc
- 		size_t len, size_t *retlen, u_char *buf)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_read_user_prot_reg(part->master, from, len,
-+	return part->parent->_read_user_prot_reg(part->parent, from, len,
- 						 retlen, buf);
- }
- 
-@@ -154,7 +160,7 @@ static int part_get_user_prot_info(struc
- 				   size_t *retlen, struct otp_info *buf)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_get_user_prot_info(part->master, len, retlen,
-+	return part->parent->_get_user_prot_info(part->parent, len, retlen,
- 						 buf);
- }
- 
-@@ -162,7 +168,7 @@ static int part_read_fact_prot_reg(struc
- 		size_t len, size_t *retlen, u_char *buf)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_read_fact_prot_reg(part->master, from, len,
-+	return part->parent->_read_fact_prot_reg(part->parent, from, len,
- 						 retlen, buf);
- }
- 
-@@ -170,7 +176,7 @@ static int part_get_fact_prot_info(struc
- 				   size_t *retlen, struct otp_info *buf)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_get_fact_prot_info(part->master, len, retlen,
-+	return part->parent->_get_fact_prot_info(part->parent, len, retlen,
- 						 buf);
- }
- 
-@@ -178,7 +184,7 @@ static int part_write(struct mtd_info *m
- 		size_t *retlen, const u_char *buf)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_write(part->master, to + part->offset, len,
-+	return part->parent->_write(part->parent, to + part->offset, len,
- 				    retlen, buf);
- }
- 
-@@ -186,7 +192,7 @@ static int part_panic_write(struct mtd_i
- 		size_t *retlen, const u_char *buf)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_panic_write(part->master, to + part->offset, len,
-+	return part->parent->_panic_write(part->parent, to + part->offset, len,
- 					  retlen, buf);
- }
- 
-@@ -199,14 +205,14 @@ static int part_write_oob(struct mtd_inf
- 		return -EINVAL;
- 	if (ops->datbuf && to + ops->len > mtd->size)
- 		return -EINVAL;
--	return part->master->_write_oob(part->master, to + part->offset, ops);
-+	return part->parent->_write_oob(part->parent, to + part->offset, ops);
- }
- 
- static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
- 		size_t len, size_t *retlen, u_char *buf)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_write_user_prot_reg(part->master, from, len,
-+	return part->parent->_write_user_prot_reg(part->parent, from, len,
- 						  retlen, buf);
- }
- 
-@@ -214,14 +220,14 @@ static int part_lock_user_prot_reg(struc
- 		size_t len)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_lock_user_prot_reg(part->master, from, len);
-+	return part->parent->_lock_user_prot_reg(part->parent, from, len);
- }
- 
- static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
- 		unsigned long count, loff_t to, size_t *retlen)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_writev(part->master, vecs, count,
-+	return part->parent->_writev(part->parent, vecs, count,
- 				     to + part->offset, retlen);
- }
- 
-@@ -231,7 +237,7 @@ static int part_erase(struct mtd_info *m
- 	int ret;
- 
- 	instr->addr += part->offset;
--	ret = part->master->_erase(part->master, instr);
-+	ret = part->parent->_erase(part->parent, instr);
- 	if (ret) {
- 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
- 			instr->fail_addr -= part->offset;
-@@ -257,51 +263,51 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback);
- static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_lock(part->master, ofs + part->offset, len);
-+	return part->parent->_lock(part->parent, ofs + part->offset, len);
- }
- 
- static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_unlock(part->master, ofs + part->offset, len);
-+	return part->parent->_unlock(part->parent, ofs + part->offset, len);
- }
- 
- static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_is_locked(part->master, ofs + part->offset, len);
-+	return part->parent->_is_locked(part->parent, ofs + part->offset, len);
- }
- 
- static void part_sync(struct mtd_info *mtd)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	part->master->_sync(part->master);
-+	part->parent->_sync(part->parent);
- }
- 
- static int part_suspend(struct mtd_info *mtd)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_suspend(part->master);
-+	return part->parent->_suspend(part->parent);
- }
- 
- static void part_resume(struct mtd_info *mtd)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	part->master->_resume(part->master);
-+	part->parent->_resume(part->parent);
- }
- 
- static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 	ofs += part->offset;
--	return part->master->_block_isreserved(part->master, ofs);
-+	return part->parent->_block_isreserved(part->parent, ofs);
- }
- 
- static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 	ofs += part->offset;
--	return part->master->_block_isbad(part->master, ofs);
-+	return part->parent->_block_isbad(part->parent, ofs);
- }
- 
- static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
-@@ -310,7 +316,7 @@ static int part_block_markbad(struct mtd
- 	int res;
- 
- 	ofs += part->offset;
--	res = part->master->_block_markbad(part->master, ofs);
-+	res = part->parent->_block_markbad(part->parent, ofs);
- 	if (!res)
- 		mtd->ecc_stats.badblocks++;
- 	return res;
-@@ -319,13 +325,13 @@ static int part_block_markbad(struct mtd
- static int part_get_device(struct mtd_info *mtd)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->master->_get_device(part->master);
-+	return part->parent->_get_device(part->parent);
- }
- 
- static void part_put_device(struct mtd_info *mtd)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	part->master->_put_device(part->master);
-+	part->parent->_put_device(part->parent);
- }
- 
- static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
-@@ -333,7 +339,7 @@ static int part_ooblayout_ecc(struct mtd
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 
--	return mtd_ooblayout_ecc(part->master, section, oobregion);
-+	return mtd_ooblayout_ecc(part->parent, section, oobregion);
- }
- 
- static int part_ooblayout_free(struct mtd_info *mtd, int section,
-@@ -341,7 +347,7 @@ static int part_ooblayout_free(struct mt
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 
--	return mtd_ooblayout_free(part->master, section, oobregion);
-+	return mtd_ooblayout_free(part->parent, section, oobregion);
- }
- 
- static const struct mtd_ooblayout_ops part_ooblayout_ops = {
-@@ -353,7 +359,7 @@ static int part_max_bad_blocks(struct mt
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 
--	return part->master->_max_bad_blocks(part->master,
-+	return part->parent->_max_bad_blocks(part->parent,
- 					     ofs + part->offset, len);
- }
- 
-@@ -363,12 +369,12 @@ static inline void free_partition(struct
- 	kfree(p);
- }
- 
--static struct mtd_part *allocate_partition(struct mtd_info *master,
-+static struct mtd_part *allocate_partition(struct mtd_info *parent,
- 			const struct mtd_partition *part, int partno,
- 			uint64_t cur_offset)
- {
--	int wr_alignment = (master->flags & MTD_NO_ERASE) ? master->writesize:
--							    master->erasesize;
-+	int wr_alignment = (parent->flags & MTD_NO_ERASE) ? parent->writesize:
-+							    parent->erasesize;
- 	struct mtd_part *slave;
- 	u32 remainder;
- 	char *name;
-@@ -379,25 +385,25 @@ static struct mtd_part *allocate_partiti
- 	name = kstrdup(part->name, GFP_KERNEL);
- 	if (!name || !slave) {
- 		printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
--		       master->name);
-+		       parent->name);
- 		kfree(name);
- 		kfree(slave);
- 		return ERR_PTR(-ENOMEM);
- 	}
- 
- 	/* set up the MTD object for this partition */
--	slave->mtd.type = master->type;
--	slave->mtd.flags = master->flags & ~part->mask_flags;
-+	slave->mtd.type = parent->type;
-+	slave->mtd.flags = parent->flags & ~part->mask_flags;
- 	slave->mtd.size = part->size;
--	slave->mtd.writesize = master->writesize;
--	slave->mtd.writebufsize = master->writebufsize;
--	slave->mtd.oobsize = master->oobsize;
--	slave->mtd.oobavail = master->oobavail;
--	slave->mtd.subpage_sft = master->subpage_sft;
--	slave->mtd.pairing = master->pairing;
-+	slave->mtd.writesize = parent->writesize;
-+	slave->mtd.writebufsize = parent->writebufsize;
-+	slave->mtd.oobsize = parent->oobsize;
-+	slave->mtd.oobavail = parent->oobavail;
-+	slave->mtd.subpage_sft = parent->subpage_sft;
-+	slave->mtd.pairing = parent->pairing;
- 
- 	slave->mtd.name = name;
--	slave->mtd.owner = master->owner;
-+	slave->mtd.owner = parent->owner;
- 
- 	/* NOTE: Historically, we didn't arrange MTDs as a tree out of
- 	 * concern for showing the same data in multiple partitions.
-@@ -408,70 +414,70 @@ static struct mtd_part *allocate_partiti
- 	 * distinguish between the master and the partition in sysfs.
- 	 */
- 	slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) ?
--				&master->dev :
--				master->dev.parent;
-+				&parent->dev :
-+				parent->dev.parent;
- 	slave->mtd.dev.of_node = part->of_node;
- 
- 	slave->mtd._read = part_read;
- 	slave->mtd._write = part_write;
- 
--	if (master->_panic_write)
-+	if (parent->_panic_write)
- 		slave->mtd._panic_write = part_panic_write;
- 
--	if (master->_point && master->_unpoint) {
-+	if (parent->_point && parent->_unpoint) {
- 		slave->mtd._point = part_point;
- 		slave->mtd._unpoint = part_unpoint;
- 	}
- 
--	if (master->_get_unmapped_area)
-+	if (parent->_get_unmapped_area)
- 		slave->mtd._get_unmapped_area = part_get_unmapped_area;
--	if (master->_read_oob)
-+	if (parent->_read_oob)
- 		slave->mtd._read_oob = part_read_oob;
--	if (master->_write_oob)
-+	if (parent->_write_oob)
- 		slave->mtd._write_oob = part_write_oob;
--	if (master->_read_user_prot_reg)
-+	if (parent->_read_user_prot_reg)
- 		slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
--	if (master->_read_fact_prot_reg)
-+	if (parent->_read_fact_prot_reg)
- 		slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
--	if (master->_write_user_prot_reg)
-+	if (parent->_write_user_prot_reg)
- 		slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
--	if (master->_lock_user_prot_reg)
-+	if (parent->_lock_user_prot_reg)
- 		slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
--	if (master->_get_user_prot_info)
-+	if (parent->_get_user_prot_info)
- 		slave->mtd._get_user_prot_info = part_get_user_prot_info;
--	if (master->_get_fact_prot_info)
-+	if (parent->_get_fact_prot_info)
- 		slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
--	if (master->_sync)
-+	if (parent->_sync)
- 		slave->mtd._sync = part_sync;
--	if (!partno && !master->dev.class && master->_suspend &&
--	    master->_resume) {
-+	if (!partno && !parent->dev.class && parent->_suspend &&
-+	    parent->_resume) {
- 			slave->mtd._suspend = part_suspend;
- 			slave->mtd._resume = part_resume;
- 	}
--	if (master->_writev)
-+	if (parent->_writev)
- 		slave->mtd._writev = part_writev;
--	if (master->_lock)
-+	if (parent->_lock)
- 		slave->mtd._lock = part_lock;
--	if (master->_unlock)
-+	if (parent->_unlock)
- 		slave->mtd._unlock = part_unlock;
--	if (master->_is_locked)
-+	if (parent->_is_locked)
- 		slave->mtd._is_locked = part_is_locked;
--	if (master->_block_isreserved)
-+	if (parent->_block_isreserved)
- 		slave->mtd._block_isreserved = part_block_isreserved;
--	if (master->_block_isbad)
-+	if (parent->_block_isbad)
- 		slave->mtd._block_isbad = part_block_isbad;
--	if (master->_block_markbad)
-+	if (parent->_block_markbad)
- 		slave->mtd._block_markbad = part_block_markbad;
--	if (master->_max_bad_blocks)
-+	if (parent->_max_bad_blocks)
- 		slave->mtd._max_bad_blocks = part_max_bad_blocks;
- 
--	if (master->_get_device)
-+	if (parent->_get_device)
- 		slave->mtd._get_device = part_get_device;
--	if (master->_put_device)
-+	if (parent->_put_device)
- 		slave->mtd._put_device = part_put_device;
- 
- 	slave->mtd._erase = part_erase;
--	slave->master = master;
-+	slave->parent = parent;
- 	slave->offset = part->offset;
- 
- 	if (slave->offset == MTDPART_OFS_APPEND)
-@@ -489,25 +495,25 @@ static struct mtd_part *allocate_partiti
- 	}
- 	if (slave->offset == MTDPART_OFS_RETAIN) {
- 		slave->offset = cur_offset;
--		if (master->size - slave->offset >= slave->mtd.size) {
--			slave->mtd.size = master->size - slave->offset
-+		if (parent->size - slave->offset >= slave->mtd.size) {
-+			slave->mtd.size = parent->size - slave->offset
- 							- slave->mtd.size;
- 		} else {
- 			printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
--				part->name, master->size - slave->offset,
-+				part->name, parent->size - slave->offset,
- 				slave->mtd.size);
- 			/* register to preserve ordering */
- 			goto out_register;
- 		}
- 	}
- 	if (slave->mtd.size == MTDPART_SIZ_FULL)
--		slave->mtd.size = master->size - slave->offset;
-+		slave->mtd.size = parent->size - slave->offset;
- 
- 	printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset,
- 		(unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name);
- 
- 	/* let's do some sanity checks */
--	if (slave->offset >= master->size) {
-+	if (slave->offset >= parent->size) {
- 		/* let's register it anyway to preserve ordering */
- 		slave->offset = 0;
- 		slave->mtd.size = 0;
-@@ -515,16 +521,16 @@ static struct mtd_part *allocate_partiti
- 			part->name);
- 		goto out_register;
- 	}
--	if (slave->offset + slave->mtd.size > master->size) {
--		slave->mtd.size = master->size - slave->offset;
-+	if (slave->offset + slave->mtd.size > parent->size) {
-+		slave->mtd.size = parent->size - slave->offset;
- 		printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#llx\n",
--			part->name, master->name, (unsigned long long)slave->mtd.size);
-+			part->name, parent->name, (unsigned long long)slave->mtd.size);
- 	}
--	if (master->numeraseregions > 1) {
-+	if (parent->numeraseregions > 1) {
- 		/* Deal with variable erase size stuff */
--		int i, max = master->numeraseregions;
-+		int i, max = parent->numeraseregions;
- 		u64 end = slave->offset + slave->mtd.size;
--		struct mtd_erase_region_info *regions = master->eraseregions;
-+		struct mtd_erase_region_info *regions = parent->eraseregions;
- 
- 		/* Find the first erase regions which is part of this
- 		 * partition. */
-@@ -543,7 +549,7 @@ static struct mtd_part *allocate_partiti
- 		BUG_ON(slave->mtd.erasesize == 0);
- 	} else {
- 		/* Single erase size */
--		slave->mtd.erasesize = master->erasesize;
-+		slave->mtd.erasesize = parent->erasesize;
- 	}
- 
- 	tmp = slave->offset;
-@@ -566,17 +572,17 @@ static struct mtd_part *allocate_partiti
- 	}
- 
- 	mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
--	slave->mtd.ecc_step_size = master->ecc_step_size;
--	slave->mtd.ecc_strength = master->ecc_strength;
--	slave->mtd.bitflip_threshold = master->bitflip_threshold;
-+	slave->mtd.ecc_step_size = parent->ecc_step_size;
-+	slave->mtd.ecc_strength = parent->ecc_strength;
-+	slave->mtd.bitflip_threshold = parent->bitflip_threshold;
- 
--	if (master->_block_isbad) {
-+	if (parent->_block_isbad) {
- 		uint64_t offs = 0;
- 
- 		while (offs < slave->mtd.size) {
--			if (mtd_block_isreserved(master, offs + slave->offset))
-+			if (mtd_block_isreserved(parent, offs + slave->offset))
- 				slave->mtd.ecc_stats.bbtblocks++;
--			else if (mtd_block_isbad(master, offs + slave->offset))
-+			else if (mtd_block_isbad(parent, offs + slave->offset))
- 				slave->mtd.ecc_stats.badblocks++;
- 			offs += slave->mtd.erasesize;
- 		}
-@@ -610,7 +616,7 @@ static int mtd_add_partition_attrs(struc
- 	return ret;
- }
- 
--int mtd_add_partition(struct mtd_info *master, const char *name,
-+int mtd_add_partition(struct mtd_info *parent, const char *name,
- 		      long long offset, long long length)
- {
- 	struct mtd_partition part;
-@@ -623,7 +629,7 @@ int mtd_add_partition(struct mtd_info *m
- 		return -EINVAL;
- 
- 	if (length == MTDPART_SIZ_FULL)
--		length = master->size - offset;
-+		length = parent->size - offset;
- 
- 	if (length <= 0)
- 		return -EINVAL;
-@@ -633,7 +639,7 @@ int mtd_add_partition(struct mtd_info *m
- 	part.size = length;
- 	part.offset = offset;
- 
--	new = allocate_partition(master, &part, -1, offset);
-+	new = allocate_partition(parent, &part, -1, offset);
- 	if (IS_ERR(new))
- 		return PTR_ERR(new);
- 
-@@ -683,7 +689,7 @@ int del_mtd_partitions(struct mtd_info *
- 
- 	mutex_lock(&mtd_partitions_mutex);
- 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
--		if (slave->master == master) {
-+		if (slave->parent == master) {
- 			ret = __mtd_del_partition(slave);
- 			if (ret < 0)
- 				err = ret;
-@@ -700,7 +706,7 @@ int mtd_del_partition(struct mtd_info *m
- 
- 	mutex_lock(&mtd_partitions_mutex);
- 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
--		if ((slave->master == master) &&
-+		if ((slave->parent == master) &&
- 		    (slave->mtd.index == partno)) {
- 			ret = __mtd_del_partition(slave);
- 			break;
-@@ -933,6 +939,6 @@ uint64_t mtd_get_device_size(const struc
- 	if (!mtd_is_partition(mtd))
- 		return mtd->size;
- 
--	return mtd_to_part(mtd)->master->size;
-+	return mtd_to_part(mtd)->parent->size;
- }
- EXPORT_SYMBOL_GPL(mtd_get_device_size);
diff --git a/target/linux/generic/backport-4.9/065-v4.13-0006-mtd-partitions-add-support-for-subpartitions.patch b/target/linux/generic/backport-4.9/065-v4.13-0006-mtd-partitions-add-support-for-subpartitions.patch
deleted file mode 100644
index 0d3e10ac20..0000000000
--- a/target/linux/generic/backport-4.9/065-v4.13-0006-mtd-partitions-add-support-for-subpartitions.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 97519dc52b44af054d7654776e78eaa211cf1842 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Jun 2017 08:26:45 +0200
-Subject: [PATCH] mtd: partitions: add support for subpartitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some flash device partitions can be containers with extra subpartitions
-(volumes). All callbacks are already capable of this additional level of
-indirection.
-
-This patch makes sure we always display subpartitions using a tree
-structure and takes care of deleting subpartitions when parent gets
-removed.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c | 23 ++++++++++++++++-------
- 1 file changed, 16 insertions(+), 7 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -413,7 +413,7 @@ static struct mtd_part *allocate_partiti
- 	 * parent conditional on that option. Note, this is a way to
- 	 * distinguish between the master and the partition in sysfs.
- 	 */
--	slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) ?
-+	slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) || mtd_is_partition(parent) ?
- 				&parent->dev :
- 				parent->dev.parent;
- 	slave->mtd.dev.of_node = part->of_node;
-@@ -664,8 +664,17 @@ EXPORT_SYMBOL_GPL(mtd_add_partition);
-  */
- static int __mtd_del_partition(struct mtd_part *priv)
- {
-+	struct mtd_part *child, *next;
- 	int err;
- 
-+	list_for_each_entry_safe(child, next, &mtd_partitions, list) {
-+		if (child->parent == &priv->mtd) {
-+			err = __mtd_del_partition(child);
-+			if (err)
-+				return err;
-+		}
-+	}
-+
- 	sysfs_remove_files(&priv->mtd.dev.kobj, mtd_partition_attrs);
- 
- 	err = del_mtd_device(&priv->mtd);
-@@ -680,16 +689,16 @@ static int __mtd_del_partition(struct mt
- 
- /*
-  * This function unregisters and destroy all slave MTD objects which are
-- * attached to the given master MTD object.
-+ * attached to the given MTD object.
-  */
--int del_mtd_partitions(struct mtd_info *master)
-+int del_mtd_partitions(struct mtd_info *mtd)
- {
- 	struct mtd_part *slave, *next;
- 	int ret, err = 0;
- 
- 	mutex_lock(&mtd_partitions_mutex);
- 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
--		if (slave->parent == master) {
-+		if (slave->parent == mtd) {
- 			ret = __mtd_del_partition(slave);
- 			if (ret < 0)
- 				err = ret;
-@@ -699,14 +708,14 @@ int del_mtd_partitions(struct mtd_info *
- 	return err;
- }
- 
--int mtd_del_partition(struct mtd_info *master, int partno)
-+int mtd_del_partition(struct mtd_info *mtd, int partno)
- {
- 	struct mtd_part *slave, *next;
- 	int ret = -EINVAL;
- 
- 	mutex_lock(&mtd_partitions_mutex);
- 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
--		if ((slave->parent == master) &&
-+		if ((slave->parent == mtd) &&
- 		    (slave->mtd.index == partno)) {
- 			ret = __mtd_del_partition(slave);
- 			break;
-@@ -939,6 +948,6 @@ uint64_t mtd_get_device_size(const struc
- 	if (!mtd_is_partition(mtd))
- 		return mtd->size;
- 
--	return mtd_to_part(mtd)->parent->size;
-+	return mtd_get_device_size(mtd_to_part(mtd)->parent);
- }
- EXPORT_SYMBOL_GPL(mtd_get_device_size);
diff --git a/target/linux/generic/backport-4.9/065-v4.13-0007-mtd-partitions-add-support-for-partition-parsers.patch b/target/linux/generic/backport-4.9/065-v4.13-0007-mtd-partitions-add-support-for-partition-parsers.patch
deleted file mode 100644
index a28ee316fa..0000000000
--- a/target/linux/generic/backport-4.9/065-v4.13-0007-mtd-partitions-add-support-for-partition-parsers.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 1a0915be192606fee64830b9c5d70b7ed59426b6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Jun 2017 08:26:46 +0200
-Subject: [PATCH] mtd: partitions: add support for partition parsers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some devices have partitions that are kind of containers with extra
-subpartitions / volumes instead of e.g. a simple filesystem data. To
-support such cases we need to first create normal flash device
-partitions and then take care of these special ones.
-
-It's very common case for home routers. Depending on the vendor there
-are formats like TRX, Seama, TP-Link, WRGG & more. All of them are used
-to embed few partitions into a single one / single firmware file.
-
-Ideally all vendors would use some well documented / standardized format
-like UBI (and some probably start doing so), but there are still
-countless devices on the market using these poor vendor specific
-formats.
-
-This patch extends MTD subsystem by allowing to specify list of parsers
-that should be tried for a given partition. Supporting such poor formats
-is highly unlikely to be the top priority so these changes try to
-minimize maintenance cost to the minimum. It reuses existing code for
-these new parsers and just adds a one property and one new function.
-
-This implementation requires setting partition parsers in a flash
-parser. A proper change of bcm47xxpart will follow and in the future we
-will hopefully also find a solution for doing it with ofpart
-("fixed-partitions").
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/mtdpart.c          | 31 +++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |  7 +++++++
- 2 files changed, 38 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -369,6 +369,35 @@ static inline void free_partition(struct
- 	kfree(p);
- }
- 
-+/**
-+ * mtd_parse_part - parse MTD partition looking for subpartitions
-+ *
-+ * @slave: part that is supposed to be a container and should be parsed
-+ * @types: NULL-terminated array with names of partition parsers to try
-+ *
-+ * Some partitions are kind of containers with extra subpartitions (volumes).
-+ * There can be various formats of such containers. This function tries to use
-+ * specified parsers to analyze given partition and registers found
-+ * subpartitions on success.
-+ */
-+static int mtd_parse_part(struct mtd_part *slave, const char *const *types)
-+{
-+	struct mtd_partitions parsed;
-+	int err;
-+
-+	err = parse_mtd_partitions(&slave->mtd, types, &parsed, NULL);
-+	if (err)
-+		return err;
-+	else if (!parsed.nr_parts)
-+		return -ENOENT;
-+
-+	err = add_mtd_partitions(&slave->mtd, parsed.parts, parsed.nr_parts);
-+
-+	mtd_part_parser_cleanup(&parsed);
-+
-+	return err;
-+}
-+
- static struct mtd_part *allocate_partition(struct mtd_info *parent,
- 			const struct mtd_partition *part, int partno,
- 			uint64_t cur_offset)
-@@ -758,6 +787,8 @@ int add_mtd_partitions(struct mtd_info *
- 
- 		add_mtd_device(&slave->mtd);
- 		mtd_add_partition_attrs(slave);
-+		if (parts[i].types)
-+			mtd_parse_part(slave, parts[i].types);
- 
- 		cur_offset = slave->offset + slave->mtd.size;
- 	}
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -20,6 +20,12 @@
-  *
-  * For each partition, these fields are available:
-  * name: string that will be used to label the partition's MTD device.
-+ * types: some partitions can be containers using specific format to describe
-+ *	embedded subpartitions / volumes. E.g. many home routers use "firmware"
-+ *	partition that contains at least kernel and rootfs. In such case an
-+ *	extra parser is needed that will detect these dynamic partitions and
-+ *	report them to the MTD subsystem. If set this property stores an array
-+ *	of parser names to use when looking for subpartitions.
-  * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
-  * 	will extend to the end of the master MTD device.
-  * offset: absolute starting position within the master MTD device; if
-@@ -38,6 +44,7 @@
- 
- struct mtd_partition {
- 	const char *name;		/* identifier string */
-+	const char *const *types;	/* names of parsers to use if any */
- 	uint64_t size;			/* partition size */
- 	uint64_t offset;		/* offset within the master MTD space */
- 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
diff --git a/target/linux/generic/backport-4.9/065-v4.13-0008-mtd-extract-TRX-parser-out-of-bcm47xxpart-into-a-sep.patch b/target/linux/generic/backport-4.9/065-v4.13-0008-mtd-extract-TRX-parser-out-of-bcm47xxpart-into-a-sep.patch
deleted file mode 100644
index 3761a46610..0000000000
--- a/target/linux/generic/backport-4.9/065-v4.13-0008-mtd-extract-TRX-parser-out-of-bcm47xxpart-into-a-sep.patch
+++ /dev/null
@@ -1,320 +0,0 @@
-From 99352afe8f169c95b294b6b9a8d0e18cd9e3c2a0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Jun 2017 08:26:47 +0200
-Subject: [PATCH] mtd: extract TRX parser out of bcm47xxpart into a separated
- module
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This makes TRX parsing code reusable with other platforms and parsers.
-
-Please note this patch doesn't really change anything in the existing
-code, just moves it. There is still some place for improvement (e.g.
-working on non-hacky method of checking rootfs format) but it's not
-really a subject of this change.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/mtd/Kconfig              |   4 ++
- drivers/mtd/Makefile             |   1 +
- drivers/mtd/bcm47xxpart.c        |  99 ++----------------------------
- drivers/mtd/parsers/Kconfig      |   8 +++
- drivers/mtd/parsers/Makefile     |   1 +
- drivers/mtd/parsers/parser_trx.c | 126 +++++++++++++++++++++++++++++++++++++++
- 6 files changed, 145 insertions(+), 94 deletions(-)
- create mode 100644 drivers/mtd/parsers/Kconfig
- create mode 100644 drivers/mtd/parsers/Makefile
- create mode 100644 drivers/mtd/parsers/parser_trx.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -155,6 +155,10 @@ config MTD_BCM47XX_PARTS
- 	  This provides partitions parser for devices based on BCM47xx
- 	  boards.
- 
-+menu "Partition parsers"
-+source "drivers/mtd/parsers/Kconfig"
-+endmenu
-+
- comment "User Modules And Translation Layers"
- 
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
-+obj-y				+= parsers/
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -43,7 +43,8 @@
- #define ML_MAGIC2			0x26594131
- #define TRX_MAGIC			0x30524448
- #define SHSQ_MAGIC			0x71736873	/* shsq (weird ZTE H218N endianness) */
--#define UBI_EC_MAGIC			0x23494255	/* UBI# */
-+
-+static const char * const trx_types[] = { "trx", NULL };
- 
- struct trx_header {
- 	uint32_t magic;
-@@ -62,89 +63,6 @@ static void bcm47xxpart_add_part(struct
- 	part->mask_flags = mask_flags;
- }
- 
--static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
--						  size_t offset)
--{
--	uint32_t buf;
--	size_t bytes_read;
--	int err;
--
--	err  = mtd_read(master, offset, sizeof(buf), &bytes_read,
--			(uint8_t *)&buf);
--	if (err && !mtd_is_bitflip(err)) {
--		pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
--			offset, err);
--		goto out_default;
--	}
--
--	if (buf == UBI_EC_MAGIC)
--		return "ubi";
--
--out_default:
--	return "rootfs";
--}
--
--static int bcm47xxpart_parse_trx(struct mtd_info *master,
--				 struct mtd_partition *trx,
--				 struct mtd_partition *parts,
--				 size_t parts_len)
--{
--	struct trx_header header;
--	size_t bytes_read;
--	int curr_part = 0;
--	int i, err;
--
--	if (parts_len < 3) {
--		pr_warn("No enough space to add TRX partitions!\n");
--		return -ENOMEM;
--	}
--
--	err = mtd_read(master, trx->offset, sizeof(header), &bytes_read,
--		       (uint8_t *)&header);
--	if (err && !mtd_is_bitflip(err)) {
--		pr_err("mtd_read error while reading TRX header: %d\n", err);
--		return err;
--	}
--
--	i = 0;
--
--	/* We have LZMA loader if offset[2] points to sth */
--	if (header.offset[2]) {
--		bcm47xxpart_add_part(&parts[curr_part++], "loader",
--				     trx->offset + header.offset[i], 0);
--		i++;
--	}
--
--	if (header.offset[i]) {
--		bcm47xxpart_add_part(&parts[curr_part++], "linux",
--				     trx->offset + header.offset[i], 0);
--		i++;
--	}
--
--	if (header.offset[i]) {
--		size_t offset = trx->offset + header.offset[i];
--		const char *name = bcm47xxpart_trx_data_part_name(master,
--								  offset);
--
--		bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0);
--		i++;
--	}
--
--	/*
--	 * Assume that every partition ends at the beginning of the one it is
--	 * followed by.
--	 */
--	for (i = 0; i < curr_part; i++) {
--		u64 next_part_offset = (i < curr_part - 1) ?
--					parts[i + 1].offset :
--					trx->offset + trx->size;
--
--		parts[i].size = next_part_offset - parts[i].offset;
--	}
--
--	return curr_part;
--}
--
- /**
-  * bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader
-  *
-@@ -362,17 +280,10 @@ static int bcm47xxpart_parse(struct mtd_
- 	for (i = 0; i < trx_num; i++) {
- 		struct mtd_partition *trx = &parts[trx_parts[i]];
- 
--		if (i == bcm47xxpart_bootpartition()) {
--			int num_parts;
--
--			num_parts = bcm47xxpart_parse_trx(master, trx,
--							  parts + curr_part,
--							  BCM47XXPART_MAX_PARTS - curr_part);
--			if (num_parts > 0)
--				curr_part += num_parts;
--		} else {
-+		if (i == bcm47xxpart_bootpartition())
-+			trx->types = trx_types;
-+		else
- 			trx->name = "failsafe";
--		}
- 	}
- 
- 	*pparts = parts;
---- /dev/null
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -0,0 +1,8 @@
-+config MTD_PARSER_TRX
-+	tristate "Parser for TRX format partitions"
-+	depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
-+	help
-+	  TRX is a firmware format used by Broadcom on their devices. It
-+	  may contain up to 3/4 partitions (depending on the version).
-+	  This driver will parse TRX header and report at least two partitions:
-+	  kernel and rootfs.
---- /dev/null
-+++ b/drivers/mtd/parsers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
---- /dev/null
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -0,0 +1,126 @@
-+/*
-+ * Parser for TRX format partitions
-+ *
-+ * Copyright (C) 2012 - 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define TRX_PARSER_MAX_PARTS		4
-+
-+/* Magics */
-+#define TRX_MAGIC			0x30524448
-+#define UBI_EC_MAGIC			0x23494255	/* UBI# */
-+
-+struct trx_header {
-+	uint32_t magic;
-+	uint32_t length;
-+	uint32_t crc32;
-+	uint16_t flags;
-+	uint16_t version;
-+	uint32_t offset[3];
-+} __packed;
-+
-+static const char *parser_trx_data_part_name(struct mtd_info *master,
-+					     size_t offset)
-+{
-+	uint32_t buf;
-+	size_t bytes_read;
-+	int err;
-+
-+	err  = mtd_read(master, offset, sizeof(buf), &bytes_read,
-+			(uint8_t *)&buf);
-+	if (err && !mtd_is_bitflip(err)) {
-+		pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
-+			offset, err);
-+		goto out_default;
-+	}
-+
-+	if (buf == UBI_EC_MAGIC)
-+		return "ubi";
-+
-+out_default:
-+	return "rootfs";
-+}
-+
-+static int parser_trx_parse(struct mtd_info *mtd,
-+			    const struct mtd_partition **pparts,
-+			    struct mtd_part_parser_data *data)
-+{
-+	struct mtd_partition *parts;
-+	struct mtd_partition *part;
-+	struct trx_header trx;
-+	size_t bytes_read;
-+	uint8_t curr_part = 0, i = 0;
-+	int err;
-+
-+	parts = kzalloc(sizeof(struct mtd_partition) * TRX_PARSER_MAX_PARTS,
-+			GFP_KERNEL);
-+	if (!parts)
-+		return -ENOMEM;
-+
-+	err = mtd_read(mtd, 0, sizeof(trx), &bytes_read, (uint8_t *)&trx);
-+	if (err) {
-+		pr_err("MTD reading error: %d\n", err);
-+		kfree(parts);
-+		return err;
-+	}
-+
-+	if (trx.magic != TRX_MAGIC) {
-+		kfree(parts);
-+		return -ENOENT;
-+	}
-+
-+	/* We have LZMA loader if there is address in offset[2] */
-+	if (trx.offset[2]) {
-+		part = &parts[curr_part++];
-+		part->name = "loader";
-+		part->offset = trx.offset[i];
-+		i++;
-+	}
-+
-+	if (trx.offset[i]) {
-+		part = &parts[curr_part++];
-+		part->name = "linux";
-+		part->offset = trx.offset[i];
-+		i++;
-+	}
-+
-+	if (trx.offset[i]) {
-+		part = &parts[curr_part++];
-+		part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
-+		part->offset = trx.offset[i];
-+		i++;
-+	}
-+
-+	/*
-+	 * Assume that every partition ends at the beginning of the one it is
-+	 * followed by.
-+	 */
-+	for (i = 0; i < curr_part; i++) {
-+		u64 next_part_offset = (i < curr_part - 1) ?
-+				       parts[i + 1].offset : mtd->size;
-+
-+		parts[i].size = next_part_offset - parts[i].offset;
-+	}
-+
-+	*pparts = parts;
-+	return i;
-+};
-+
-+static struct mtd_part_parser mtd_parser_trx = {
-+	.parse_fn = parser_trx_parse,
-+	.name = "trx",
-+};
-+module_mtd_part_parser(mtd_parser_trx);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Parser for TRX format partitions");
diff --git a/target/linux/generic/backport-4.9/066-v4.17-0001-mtd-move-code-adding-master-MTD-out-of-mtd_add_devic.patch b/target/linux/generic/backport-4.9/066-v4.17-0001-mtd-move-code-adding-master-MTD-out-of-mtd_add_devic.patch
deleted file mode 100644
index 07a456d4c0..0000000000
--- a/target/linux/generic/backport-4.9/066-v4.17-0001-mtd-move-code-adding-master-MTD-out-of-mtd_add_devic.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 2c77c57d22adb05b21cdb333a0c42bdfa0e19835 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 16 Jan 2018 16:45:41 +0100
-Subject: [PATCH] mtd: move code adding master MTD out of
- mtd_add_device_partitions()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This change is a small cleanup of mtd_device_parse_register(). When
-using MTD_PARTITIONED_MASTER it makes sure a master MTD is registered
-before dealing with partitions. The advantage of this is not mixing
-code handling master MTD with code handling partitions.
-
-This commit doesn't change any behavior except from a slightly different
-failure code path. The new code may need to call del_mtd_device when
-something goes wrong.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdcore.c | 25 +++++++++++++------------
- 1 file changed, 13 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -631,20 +631,12 @@ static int mtd_add_device_partitions(str
- {
- 	const struct mtd_partition *real_parts = parts->parts;
- 	int nbparts = parts->nr_parts;
--	int ret;
- 
--	if (nbparts == 0 || IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) {
--		ret = add_mtd_device(mtd);
--		if (ret)
--			return ret;
--	}
-+	if (!nbparts && !device_is_registered(&mtd->dev))
-+		return add_mtd_device(mtd);
- 
--	if (nbparts > 0) {
--		ret = add_mtd_partitions(mtd, real_parts, nbparts);
--		if (ret && IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER))
--			del_mtd_device(mtd);
--		return ret;
--	}
-+	if (nbparts > 0)
-+		return add_mtd_partitions(mtd, real_parts, nbparts);
- 
- 	return 0;
- }
-@@ -704,6 +696,12 @@ int mtd_device_parse_register(struct mtd
- 
- 	mtd_set_dev_defaults(mtd);
- 
-+	if (IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) {
-+		ret = add_mtd_device(mtd);
-+		if (ret)
-+			return ret;
-+	}
-+
- 	memset(&parsed, 0, sizeof(parsed));
- 
- 	ret = parse_mtd_partitions(mtd, types, &parsed, parser_data);
-@@ -743,6 +741,9 @@ int mtd_device_parse_register(struct mtd
- out:
- 	/* Cleanup any parsed partitions */
- 	mtd_part_parser_cleanup(&parsed);
-+	if (ret && device_is_registered(&mtd->dev))
-+		del_mtd_device(mtd);
-+
- 	return ret;
- }
- EXPORT_SYMBOL_GPL(mtd_device_parse_register);
diff --git a/target/linux/generic/backport-4.9/066-v4.17-0002-mtd-get-rid-of-the-mtd_add_device_partitions.patch b/target/linux/generic/backport-4.9/066-v4.17-0002-mtd-get-rid-of-the-mtd_add_device_partitions.patch
deleted file mode 100644
index b629d430a4..0000000000
--- a/target/linux/generic/backport-4.9/066-v4.17-0002-mtd-get-rid-of-the-mtd_add_device_partitions.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 0dbe4ea78d69756efeb0bba0764f6bd4a9ee9567 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 16 Jan 2018 16:45:42 +0100
-Subject: [PATCH] mtd: get rid of the mtd_add_device_partitions()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This simplifies code a bit by:
-1) Avoiding an extra (tiny) function
-2) Checking for amount of parsed (found) partitions just once
-3) Avoiding clearing/filling struct mtd_partitions manually
-
-With this commit proper functions are called directly from the
-mtd_device_parse_register(). It doesn't need to use minor tricks like
-memsetting struct to 0 to trigger an expected
-mtd_add_device_partitions() behavior.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdcore.c | 43 ++++++++++++-------------------------------
- 1 file changed, 12 insertions(+), 31 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -626,21 +626,6 @@ out_error:
- 	return ret;
- }
- 
--static int mtd_add_device_partitions(struct mtd_info *mtd,
--				     struct mtd_partitions *parts)
--{
--	const struct mtd_partition *real_parts = parts->parts;
--	int nbparts = parts->nr_parts;
--
--	if (!nbparts && !device_is_registered(&mtd->dev))
--		return add_mtd_device(mtd);
--
--	if (nbparts > 0)
--		return add_mtd_partitions(mtd, real_parts, nbparts);
--
--	return 0;
--}
--
- /*
-  * Set a few defaults based on the parent devices, if not provided by the
-  * driver
-@@ -691,7 +676,7 @@ int mtd_device_parse_register(struct mtd
- 			      const struct mtd_partition *parts,
- 			      int nr_parts)
- {
--	struct mtd_partitions parsed;
-+	struct mtd_partitions parsed = { };
- 	int ret;
- 
- 	mtd_set_dev_defaults(mtd);
-@@ -702,24 +687,20 @@ int mtd_device_parse_register(struct mtd
- 			return ret;
- 	}
- 
--	memset(&parsed, 0, sizeof(parsed));
--
-+	/* Prefer parsed partitions over driver-provided fallback */
- 	ret = parse_mtd_partitions(mtd, types, &parsed, parser_data);
--	if ((ret < 0 || parsed.nr_parts == 0) && parts && nr_parts) {
--		/* Fall back to driver-provided partitions */
--		parsed = (struct mtd_partitions){
--			.parts		= parts,
--			.nr_parts	= nr_parts,
--		};
--	} else if (ret < 0) {
--		/* Didn't come up with parsed OR fallback partitions */
--		pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n",
--			ret);
--		/* Don't abort on errors; we can still use unpartitioned MTD */
--		memset(&parsed, 0, sizeof(parsed));
-+	if (!ret && parsed.nr_parts) {
-+		parts = parsed.parts;
-+		nr_parts = parsed.nr_parts;
- 	}
- 
--	ret = mtd_add_device_partitions(mtd, &parsed);
-+	if (nr_parts)
-+		ret = add_mtd_partitions(mtd, parts, nr_parts);
-+	else if (!device_is_registered(&mtd->dev))
-+		ret = add_mtd_device(mtd);
-+	else
-+		ret = 0;
-+
- 	if (ret)
- 		goto out;
- 
diff --git a/target/linux/generic/backport-4.9/067-v4.17-0001-mtd-partitions-add-of_match_table-parser-matching-fo.patch b/target/linux/generic/backport-4.9/067-v4.17-0001-mtd-partitions-add-of_match_table-parser-matching-fo.patch
deleted file mode 100644
index 60eace2a34..0000000000
--- a/target/linux/generic/backport-4.9/067-v4.17-0001-mtd-partitions-add-of_match_table-parser-matching-fo.patch
+++ /dev/null
@@ -1,200 +0,0 @@
-From 5b644aa012f67fd211138a067b9f351f30bdcc60 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 14 Mar 2018 13:10:42 +0100
-Subject: [PATCH] mtd: partitions: add of_match_table parser matching for the
- "ofpart" type
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In order to properly support compatibility strings as described in the
-bindings/mtd/partition.txt "ofpart" type should be treated as an
-indication for looking into OF. MTD should check "compatible" property
-and search for a matching parser rather than blindly trying the one
-supporting "fixed-partitions".
-
-It also means that existing "fixed-partitions" parser should get renamed
-to use a more meaningful name.
-
-This commit achievies that aim by introducing a new mtd_part_of_parse().
-It works by looking for a matching parser for every string in the
-"compatibility" property (starting with the most specific one).
-
-Please note that driver-specified parsers still take a precedence. It's
-assumed that driver providing a parser type has a good reason for that
-(e.g. having platform data with device-specific info). Also doing
-otherwise could break existing setups. The same applies to using default
-parsers (including "cmdlinepart") as some overwrite DT data with cmdline
-argument.
-
-Partition parsers can now provide an of_match_table to enable
-flash<-->parser matching via device tree as documented in the
-mtd/partition.txt.
-
-This support is currently limited to built-in parsers as it uses
-request_module() and friends. This should be sufficient for most cases
-though as compiling parsers as modules isn't a common choice.
-
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Tested-by: Peter Rosin <peda@axentia.se>
-Reviewed-by: Richard Weinberger <richard@nod.at>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdpart.c          | 116 +++++++++++++++++++++++++++++++++++++----
- include/linux/mtd/partitions.h |   1 +
- 2 files changed, 108 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -30,6 +30,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/err.h>
-+#include <linux/of.h>
- 
- #include "mtdcore.h"
- 
-@@ -886,6 +887,92 @@ static int mtd_part_do_parse(struct mtd_
- }
- 
- /**
-+ * mtd_part_get_compatible_parser - find MTD parser by a compatible string
-+ *
-+ * @compat: compatible string describing partitions in a device tree
-+ *
-+ * MTD parsers can specify supported partitions by providing a table of
-+ * compatibility strings. This function finds a parser that advertises support
-+ * for a passed value of "compatible".
-+ */
-+static struct mtd_part_parser *mtd_part_get_compatible_parser(const char *compat)
-+{
-+	struct mtd_part_parser *p, *ret = NULL;
-+
-+	spin_lock(&part_parser_lock);
-+
-+	list_for_each_entry(p, &part_parsers, list) {
-+		const struct of_device_id *matches;
-+
-+		matches = p->of_match_table;
-+		if (!matches)
-+			continue;
-+
-+		for (; matches->compatible[0]; matches++) {
-+			if (!strcmp(matches->compatible, compat) &&
-+			    try_module_get(p->owner)) {
-+				ret = p;
-+				break;
-+			}
-+		}
-+
-+		if (ret)
-+			break;
-+	}
-+
-+	spin_unlock(&part_parser_lock);
-+
-+	return ret;
-+}
-+
-+static int mtd_part_of_parse(struct mtd_info *master,
-+			     struct mtd_partitions *pparts)
-+{
-+	struct mtd_part_parser *parser;
-+	struct device_node *np;
-+	struct property *prop;
-+	const char *compat;
-+	const char *fixed = "ofpart";
-+	int ret, err = 0;
-+
-+	np = of_get_child_by_name(mtd_get_of_node(master), "partitions");
-+	of_property_for_each_string(np, "compatible", prop, compat) {
-+		parser = mtd_part_get_compatible_parser(compat);
-+		if (!parser)
-+			continue;
-+		ret = mtd_part_do_parse(parser, master, pparts, NULL);
-+		if (ret > 0) {
-+			of_node_put(np);
-+			return ret;
-+		}
-+		mtd_part_parser_put(parser);
-+		if (ret < 0 && !err)
-+			err = ret;
-+	}
-+	of_node_put(np);
-+
-+	/*
-+	 * For backward compatibility we have to try the "ofpart"
-+	 * parser. It supports old DT format with partitions specified as a
-+	 * direct subnodes of a flash device DT node without any compatibility
-+	 * specified we could match.
-+	 */
-+	parser = mtd_part_parser_get(fixed);
-+	if (!parser && !request_module("%s", fixed))
-+		parser = mtd_part_parser_get(fixed);
-+	if (parser) {
-+		ret = mtd_part_do_parse(parser, master, pparts, NULL);
-+		if (ret > 0)
-+			return ret;
-+		mtd_part_parser_put(parser);
-+		if (ret < 0 && !err)
-+			err = ret;
-+	}
-+
-+	return err;
-+}
-+
-+/**
-  * parse_mtd_partitions - parse MTD partitions
-  * @master: the master partition (describes whole MTD device)
-  * @types: names of partition parsers to try or %NULL
-@@ -917,19 +1004,30 @@ int parse_mtd_partitions(struct mtd_info
- 		types = default_mtd_part_types;
- 
- 	for ( ; *types; types++) {
--		pr_debug("%s: parsing partitions %s\n", master->name, *types);
--		parser = mtd_part_parser_get(*types);
--		if (!parser && !request_module("%s", *types))
-+		/*
-+		 * ofpart is a special type that means OF partitioning info
-+		 * should be used. It requires a bit different logic so it is
-+		 * handled in a separated function.
-+		 */
-+		if (!strcmp(*types, "ofpart")) {
-+			ret = mtd_part_of_parse(master, pparts);
-+		} else {
-+			pr_debug("%s: parsing partitions %s\n", master->name,
-+				 *types);
- 			parser = mtd_part_parser_get(*types);
--		pr_debug("%s: got parser %s\n", master->name,
--			 parser ? parser->name : NULL);
--		if (!parser)
--			continue;
--		ret = mtd_part_do_parse(parser, master, pparts, data);
-+			if (!parser && !request_module("%s", *types))
-+				parser = mtd_part_parser_get(*types);
-+			pr_debug("%s: got parser %s\n", master->name,
-+				parser ? parser->name : NULL);
-+			if (!parser)
-+				continue;
-+			ret = mtd_part_do_parse(parser, master, pparts, data);
-+			if (ret <= 0)
-+				mtd_part_parser_put(parser);
-+		}
- 		/* Found partitions! */
- 		if (ret > 0)
- 			return 0;
--		mtd_part_parser_put(parser);
- 		/*
- 		 * Stash the first error we see; only report it if no parser
- 		 * succeeds
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -77,6 +77,7 @@ struct mtd_part_parser {
- 	struct list_head list;
- 	struct module *owner;
- 	const char *name;
-+	const struct of_device_id *of_match_table;
- 	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
- 			struct mtd_part_parser_data *);
- 	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
diff --git a/target/linux/generic/backport-4.9/067-v4.17-0002-mtd-rename-ofpart-parser-to-fixed-partitions-as-it-f.patch b/target/linux/generic/backport-4.9/067-v4.17-0002-mtd-rename-ofpart-parser-to-fixed-partitions-as-it-f.patch
deleted file mode 100644
index 59f53df101..0000000000
--- a/target/linux/generic/backport-4.9/067-v4.17-0002-mtd-rename-ofpart-parser-to-fixed-partitions-as-it-f.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From c0faf43482e7f7dfb6d61847cb93d17748560b24 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 14 Mar 2018 13:10:43 +0100
-Subject: [PATCH] mtd: rename "ofpart" parser to "fixed-partitions" as it fits
- it better
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Type "ofpart" means that OF should be used to get partitioning info and
-this driver supports "fixed-partitions" binding only. Renaming it should
-lead to less confusion especially when parsers for new compatibility
-strings start to appear.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Richard Weinberger <richard@nod.at>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdpart.c |  4 ++--
- drivers/mtd/ofpart.c  | 11 ++++++-----
- 2 files changed, 8 insertions(+), 7 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -932,7 +932,7 @@ static int mtd_part_of_parse(struct mtd_
- 	struct device_node *np;
- 	struct property *prop;
- 	const char *compat;
--	const char *fixed = "ofpart";
-+	const char *fixed = "fixed-partitions";
- 	int ret, err = 0;
- 
- 	np = of_get_child_by_name(mtd_get_of_node(master), "partitions");
-@@ -952,7 +952,7 @@ static int mtd_part_of_parse(struct mtd_
- 	of_node_put(np);
- 
- 	/*
--	 * For backward compatibility we have to try the "ofpart"
-+	 * For backward compatibility we have to try the "fixed-partitions"
- 	 * parser. It supports old DT format with partitions specified as a
- 	 * direct subnodes of a flash device DT node without any compatibility
- 	 * specified we could match.
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,9 +25,9 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
--static int parse_ofpart_partitions(struct mtd_info *master,
--				   const struct mtd_partition **pparts,
--				   struct mtd_part_parser_data *data)
-+static int parse_fixed_partitions(struct mtd_info *master,
-+				  const struct mtd_partition **pparts,
-+				  struct mtd_part_parser_data *data)
- {
- 	struct mtd_partition *parts;
- 	struct device_node *mtd_node;
-@@ -141,8 +141,8 @@ ofpart_none:
- }
- 
- static struct mtd_part_parser ofpart_parser = {
--	.parse_fn = parse_ofpart_partitions,
--	.name = "ofpart",
-+	.parse_fn = parse_fixed_partitions,
-+	.name = "fixed-partitions",
- };
- 
- static int parse_ofoldpart_partitions(struct mtd_info *master,
-@@ -230,4 +230,5 @@ MODULE_AUTHOR("Vitaly Wool, David Gibson
-  * with the same name. Since we provide the ofoldpart parser, we should have
-  * the corresponding alias.
-  */
-+MODULE_ALIAS("fixed-partitions");
- MODULE_ALIAS("ofoldpart");
diff --git a/target/linux/generic/backport-4.9/067-v4.17-0003-mtd-ofpart-add-of_match_table-with-fixed-partitions.patch b/target/linux/generic/backport-4.9/067-v4.17-0003-mtd-ofpart-add-of_match_table-with-fixed-partitions.patch
deleted file mode 100644
index d6958c3eac..0000000000
--- a/target/linux/generic/backport-4.9/067-v4.17-0003-mtd-ofpart-add-of_match_table-with-fixed-partitions.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 97b0c7c0df3efd7048ed39d7e2dee34cafd55887 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 14 Mar 2018 13:10:44 +0100
-Subject: [PATCH] mtd: ofpart: add of_match_table with "fixed-partitions"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows using this parser with any flash driver that takes care of
-setting of_node (using mtd_set_of_node helper) correctly. Up to now
-support for "fixed-partitions" DT compatibility string was working only
-with flash drivers that were specifying "ofpart" (manually or by letting
-mtd use the default set of parsers).
-
-This matches existing bindings documentation.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Brian Norris <computersforpeace@gmail.com>
-Tested-by: Brian Norris <computersforpeace@gmail.com>
-Reviewed-by: Richard Weinberger <richard@nod.at>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/ofpart.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -140,9 +140,16 @@ ofpart_none:
- 	return ret;
- }
- 
-+static const struct of_device_id parse_ofpart_match_table[] = {
-+	{ .compatible = "fixed-partitions" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
-+
- static struct mtd_part_parser ofpart_parser = {
- 	.parse_fn = parse_fixed_partitions,
- 	.name = "fixed-partitions",
-+	.of_match_table = parse_ofpart_match_table,
- };
- 
- static int parse_ofoldpart_partitions(struct mtd_info *master,
diff --git a/target/linux/generic/backport-4.9/068-v4.18-0001-mtd-move-code-adding-registering-partitions-to-the-p.patch b/target/linux/generic/backport-4.9/068-v4.18-0001-mtd-move-code-adding-registering-partitions-to-the-p.patch
deleted file mode 100644
index 29aa3b9e8d..0000000000
--- a/target/linux/generic/backport-4.9/068-v4.18-0001-mtd-move-code-adding-registering-partitions-to-the-p.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From 5ac67ce36cfe38b4c104a42ce52c5c8d526f1c95 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 27 Mar 2018 22:35:41 +0200
-Subject: [PATCH] mtd: move code adding (registering) partitions to the
- parse_mtd_partitions()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This commit slightly simplifies the code. Every parse_mtd_partitions()
-caller (out of two existing ones) had to add partitions & cleanup parser
-on its own. This moves that responsibility into the function.
-
-That change also allows dropping struct mtd_partitions argument.
-
-There is one minor behavior change caused by this cleanup. If
-parse_mtd_partitions() fails to add partitions (add_mtd_partitions()
-return an error) then mtd_device_parse_register() will still try to
-add (register) fallback partitions. It's a real corner case affecting
-one of uncommon error paths and shouldn't cause any harm.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdcore.c | 14 ++++----------
- drivers/mtd/mtdcore.h |  1 -
- drivers/mtd/mtdpart.c | 44 ++++++++++++++++----------------------------
- 3 files changed, 20 insertions(+), 39 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -676,7 +676,6 @@ int mtd_device_parse_register(struct mtd
- 			      const struct mtd_partition *parts,
- 			      int nr_parts)
- {
--	struct mtd_partitions parsed = { };
- 	int ret;
- 
- 	mtd_set_dev_defaults(mtd);
-@@ -688,13 +687,10 @@ int mtd_device_parse_register(struct mtd
- 	}
- 
- 	/* Prefer parsed partitions over driver-provided fallback */
--	ret = parse_mtd_partitions(mtd, types, &parsed, parser_data);
--	if (!ret && parsed.nr_parts) {
--		parts = parsed.parts;
--		nr_parts = parsed.nr_parts;
--	}
--
--	if (nr_parts)
-+	ret = parse_mtd_partitions(mtd, types, parser_data);
-+	if (ret > 0)
-+		ret = 0;
-+	else if (nr_parts)
- 		ret = add_mtd_partitions(mtd, parts, nr_parts);
- 	else if (!device_is_registered(&mtd->dev))
- 		ret = add_mtd_device(mtd);
-@@ -720,8 +716,6 @@ int mtd_device_parse_register(struct mtd
- 	}
- 
- out:
--	/* Cleanup any parsed partitions */
--	mtd_part_parser_cleanup(&parsed);
- 	if (ret && device_is_registered(&mtd->dev))
- 		del_mtd_device(mtd);
- 
---- a/drivers/mtd/mtdcore.h
-+++ b/drivers/mtd/mtdcore.h
-@@ -14,7 +14,6 @@ int del_mtd_partitions(struct mtd_info *
- struct mtd_partitions;
- 
- int parse_mtd_partitions(struct mtd_info *master, const char * const *types,
--			 struct mtd_partitions *pparts,
- 			 struct mtd_part_parser_data *data);
- 
- void mtd_part_parser_cleanup(struct mtd_partitions *parts);
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -383,20 +383,7 @@ static inline void free_partition(struct
-  */
- static int mtd_parse_part(struct mtd_part *slave, const char *const *types)
- {
--	struct mtd_partitions parsed;
--	int err;
--
--	err = parse_mtd_partitions(&slave->mtd, types, &parsed, NULL);
--	if (err)
--		return err;
--	else if (!parsed.nr_parts)
--		return -ENOENT;
--
--	err = add_mtd_partitions(&slave->mtd, parsed.parts, parsed.nr_parts);
--
--	mtd_part_parser_cleanup(&parsed);
--
--	return err;
-+	return parse_mtd_partitions(&slave->mtd, types, NULL);
- }
- 
- static struct mtd_part *allocate_partition(struct mtd_info *parent,
-@@ -973,30 +960,27 @@ static int mtd_part_of_parse(struct mtd_
- }
- 
- /**
-- * parse_mtd_partitions - parse MTD partitions
-+ * parse_mtd_partitions - parse and register MTD partitions
-+ *
-  * @master: the master partition (describes whole MTD device)
-  * @types: names of partition parsers to try or %NULL
-- * @pparts: info about partitions found is returned here
-  * @data: MTD partition parser-specific data
-  *
-- * This function tries to find partition on MTD device @master. It uses MTD
-- * partition parsers, specified in @types. However, if @types is %NULL, then
-- * the default list of parsers is used. The default list contains only the
-+ * This function tries to find & register partitions on MTD device @master. It
-+ * uses MTD partition parsers, specified in @types. However, if @types is %NULL,
-+ * then the default list of parsers is used. The default list contains only the
-  * "cmdlinepart" and "ofpart" parsers ATM.
-  * Note: If there are more then one parser in @types, the kernel only takes the
-  * partitions parsed out by the first parser.
-  *
-  * This function may return:
-  * o a negative error code in case of failure
-- * o zero otherwise, and @pparts will describe the partitions, number of
-- *   partitions, and the parser which parsed them. Caller must release
-- *   resources with mtd_part_parser_cleanup() when finished with the returned
-- *   data.
-+ * o number of found partitions otherwise
-  */
- int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
--			 struct mtd_partitions *pparts,
- 			 struct mtd_part_parser_data *data)
- {
-+	struct mtd_partitions pparts = { };
- 	struct mtd_part_parser *parser;
- 	int ret, err = 0;
- 
-@@ -1010,7 +994,7 @@ int parse_mtd_partitions(struct mtd_info
- 		 * handled in a separated function.
- 		 */
- 		if (!strcmp(*types, "ofpart")) {
--			ret = mtd_part_of_parse(master, pparts);
-+			ret = mtd_part_of_parse(master, &pparts);
- 		} else {
- 			pr_debug("%s: parsing partitions %s\n", master->name,
- 				 *types);
-@@ -1021,13 +1005,17 @@ int parse_mtd_partitions(struct mtd_info
- 				parser ? parser->name : NULL);
- 			if (!parser)
- 				continue;
--			ret = mtd_part_do_parse(parser, master, pparts, data);
-+			ret = mtd_part_do_parse(parser, master, &pparts, data);
- 			if (ret <= 0)
- 				mtd_part_parser_put(parser);
- 		}
- 		/* Found partitions! */
--		if (ret > 0)
--			return 0;
-+		if (ret > 0) {
-+			err = add_mtd_partitions(master, pparts.parts,
-+						 pparts.nr_parts);
-+			mtd_part_parser_cleanup(&pparts);
-+			return err ? err : pparts.nr_parts;
-+		}
- 		/*
- 		 * Stash the first error we see; only report it if no parser
- 		 * succeeds
diff --git a/target/linux/generic/backport-4.9/069-v4.18-mtd-bcm47xxpart-improve-handling-TRX-partition-size.patch b/target/linux/generic/backport-4.9/069-v4.18-mtd-bcm47xxpart-improve-handling-TRX-partition-size.patch
deleted file mode 100644
index e08f8dad32..0000000000
--- a/target/linux/generic/backport-4.9/069-v4.18-mtd-bcm47xxpart-improve-handling-TRX-partition-size.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 237ea0d4762cc14d0fc80e80d61f0f08e1050c7f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Apr 2018 07:24:52 +0200
-Subject: [PATCH] mtd: bcm47xxpart: improve handling TRX partition size
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When bcm47xxpart finds a TRX partition (container) it's supposed to jump
-to the end of it and keep looking for more partitions. TRX and its
-subpartitions are handled by a separate parser.
-
-The problem with old code was relying on the length specified in a TRX
-header. That isn't reliable as TRX is commonly modified to have checksum
-cover only non-changing subpartitions. Otherwise modifying e.g. a rootfs
-would result in CRC32 mismatch and bootloader refusing to boot a
-firmware.
-
-Fix it by trying better to figure out a real TRX size. We can securely
-assume that TRX has to cover all subpartitions and the last one is at
-least of a block size in size. Then compare it with a length field.
-
-This makes code more optimal & reliable thanks to skipping data that
-shouldn't be parsed.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/bcm47xxpart.c | 22 ++++++++++++++++++----
- 1 file changed, 18 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -186,6 +186,8 @@ static int bcm47xxpart_parse(struct mtd_
- 		/* TRX */
- 		if (buf[0x000 / 4] == TRX_MAGIC) {
- 			struct trx_header *trx;
-+			uint32_t last_subpart;
-+			uint32_t trx_size;
- 
- 			if (trx_num >= ARRAY_SIZE(trx_parts))
- 				pr_warn("No enough space to store another TRX found at 0x%X\n",
-@@ -195,11 +197,23 @@ static int bcm47xxpart_parse(struct mtd_
- 			bcm47xxpart_add_part(&parts[curr_part++], "firmware",
- 					     offset, 0);
- 
--			/* Jump to the end of TRX */
-+			/*
-+			 * Try to find TRX size. The "length" field isn't fully
-+			 * reliable as it could be decreased to make CRC32 cover
-+			 * only part of TRX data. It's commonly used as checksum
-+			 * can't cover e.g. ever-changing rootfs partition.
-+			 * Use offsets as helpers for assuming min TRX size.
-+			 */
- 			trx = (struct trx_header *)buf;
--			offset = roundup(offset + trx->length, blocksize);
--			/* Next loop iteration will increase the offset */
--			offset -= blocksize;
-+			last_subpart = max3(trx->offset[0], trx->offset[1],
-+					    trx->offset[2]);
-+			trx_size = max(trx->length, last_subpart + blocksize);
-+
-+			/*
-+			 * Skip the TRX data. Decrease offset by block size as
-+			 * the next loop iteration will increase it.
-+			 */
-+			offset += roundup(trx_size, blocksize) - blocksize;
- 			continue;
- 		}
- 
diff --git a/target/linux/generic/backport-4.9/070-bcma-from-4.11.patch b/target/linux/generic/backport-4.9/070-bcma-from-4.11.patch
deleted file mode 100644
index a3b0321986..0000000000
--- a/target/linux/generic/backport-4.9/070-bcma-from-4.11.patch
+++ /dev/null
@@ -1,85 +0,0 @@
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -136,17 +136,17 @@ static bool bcma_is_core_needed_early(u1
- 	return false;
- }
- 
--static struct device_node *bcma_of_find_child_device(struct platform_device *parent,
-+static struct device_node *bcma_of_find_child_device(struct device *parent,
- 						     struct bcma_device *core)
- {
- 	struct device_node *node;
- 	u64 size;
- 	const __be32 *reg;
- 
--	if (!parent || !parent->dev.of_node)
-+	if (!parent->of_node)
- 		return NULL;
- 
--	for_each_child_of_node(parent->dev.of_node, node) {
-+	for_each_child_of_node(parent->of_node, node) {
- 		reg = of_get_address(node, 0, &size, NULL);
- 		if (!reg)
- 			continue;
-@@ -156,7 +156,7 @@ static struct device_node *bcma_of_find_
- 	return NULL;
- }
- 
--static int bcma_of_irq_parse(struct platform_device *parent,
-+static int bcma_of_irq_parse(struct device *parent,
- 			     struct bcma_device *core,
- 			     struct of_phandle_args *out_irq, int num)
- {
-@@ -169,7 +169,7 @@ static int bcma_of_irq_parse(struct plat
- 			return rc;
- 	}
- 
--	out_irq->np = parent->dev.of_node;
-+	out_irq->np = parent->of_node;
- 	out_irq->args_count = 1;
- 	out_irq->args[0] = num;
- 
-@@ -177,13 +177,13 @@ static int bcma_of_irq_parse(struct plat
- 	return of_irq_parse_raw(laddr, out_irq);
- }
- 
--static unsigned int bcma_of_get_irq(struct platform_device *parent,
-+static unsigned int bcma_of_get_irq(struct device *parent,
- 				    struct bcma_device *core, int num)
- {
- 	struct of_phandle_args out_irq;
- 	int ret;
- 
--	if (!IS_ENABLED(CONFIG_OF_IRQ) || !parent || !parent->dev.of_node)
-+	if (!IS_ENABLED(CONFIG_OF_IRQ) || !parent->of_node)
- 		return 0;
- 
- 	ret = bcma_of_irq_parse(parent, core, &out_irq, num);
-@@ -196,7 +196,7 @@ static unsigned int bcma_of_get_irq(stru
- 	return irq_create_of_mapping(&out_irq);
- }
- 
--static void bcma_of_fill_device(struct platform_device *parent,
-+static void bcma_of_fill_device(struct device *parent,
- 				struct bcma_device *core)
- {
- 	struct device_node *node;
-@@ -227,7 +227,7 @@ unsigned int bcma_core_irq(struct bcma_d
- 			return mips_irq <= 4 ? mips_irq + 2 : 0;
- 		}
- 		if (bus->host_pdev)
--			return bcma_of_get_irq(bus->host_pdev, core, num);
-+			return bcma_of_get_irq(&bus->host_pdev->dev, core, num);
- 		return 0;
- 	case BCMA_HOSTTYPE_SDIO:
- 		return 0;
-@@ -253,7 +253,8 @@ void bcma_prepare_core(struct bcma_bus *
- 		if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) {
- 			core->dma_dev = &bus->host_pdev->dev;
- 			core->dev.parent = &bus->host_pdev->dev;
--			bcma_of_fill_device(bus->host_pdev, core);
-+			if (core->dev.parent)
-+				bcma_of_fill_device(core->dev.parent, core);
- 		} else {
- 			core->dev.dma_mask = &core->dev.coherent_dma_mask;
- 			core->dma_dev = &core->dev;
diff --git a/target/linux/generic/backport-4.9/071-v4.10-0001-net-bgmac-allocate-struct-bgmac-just-once-don-t-copy.patch b/target/linux/generic/backport-4.9/071-v4.10-0001-net-bgmac-allocate-struct-bgmac-just-once-don-t-copy.patch
deleted file mode 100644
index 4b667bc2f3..0000000000
--- a/target/linux/generic/backport-4.9/071-v4.10-0001-net-bgmac-allocate-struct-bgmac-just-once-don-t-copy.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From 34a5102c3235c470a6c77fba16cb971964d9c136 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 31 Jan 2017 19:37:54 +0100
-Subject: [PATCH 1/3] net: bgmac: allocate struct bgmac just once & don't copy
- it
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far were were allocating struct bgmac in 3 places: platform code,
-bcma code and shared bgmac_enet_probe function. The reason for this was
-bgmac_enet_probe:
-1) Requiring early-filled struct bgmac
-2) Calling alloc_etherdev on its own in order to use netdev_priv later
-
-This solution got few drawbacks:
-1) Was duplicating allocating code
-2) Required copying early-filled struct
-3) Resulted in platform/bcma code having access only to unused struct
-
-Solve this situation by simply extracting some probe code into the new
-bgmac_alloc function.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c     |  4 +---
- drivers/net/ethernet/broadcom/bgmac-platform.c |  2 +-
- drivers/net/ethernet/broadcom/bgmac.c          | 25 +++++++++++++++++--------
- drivers/net/ethernet/broadcom/bgmac.h          |  3 ++-
- 4 files changed, 21 insertions(+), 13 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -100,12 +100,11 @@ static int bgmac_probe(struct bcma_devic
- 	const u8 *mac = NULL;
- 	int err;
- 
--	bgmac = kzalloc(sizeof(*bgmac), GFP_KERNEL);
-+	bgmac = bgmac_alloc(&core->dev);
- 	if (!bgmac)
- 		return -ENOMEM;
- 
- 	bgmac->bcma.core = core;
--	bgmac->dev = &core->dev;
- 	bgmac->dma_dev = core->dma_dev;
- 	bgmac->irq = core->irq;
- 
-@@ -292,7 +291,6 @@ static int bgmac_probe(struct bcma_devic
- err1:
- 	bcma_mdio_mii_unregister(bgmac->mii_bus);
- err:
--	kfree(bgmac);
- 	bcma_set_drvdata(core, NULL);
- 
- 	return err;
---- a/drivers/net/ethernet/broadcom/bgmac-platform.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c
-@@ -93,7 +93,7 @@ static int bgmac_probe(struct platform_d
- 	struct resource *regs;
- 	const u8 *mac_addr;
- 
--	bgmac = devm_kzalloc(&pdev->dev, sizeof(*bgmac), GFP_KERNEL);
-+	bgmac = bgmac_alloc(&pdev->dev);
- 	if (!bgmac)
- 		return -ENOMEM;
- 
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -1460,22 +1460,32 @@ static int bgmac_phy_connect(struct bgma
- 	return 0;
- }
- 
--int bgmac_enet_probe(struct bgmac *info)
-+struct bgmac *bgmac_alloc(struct device *dev)
- {
- 	struct net_device *net_dev;
- 	struct bgmac *bgmac;
--	int err;
- 
- 	/* Allocation and references */
--	net_dev = alloc_etherdev(sizeof(*bgmac));
-+	net_dev = devm_alloc_etherdev(dev, sizeof(*bgmac));
- 	if (!net_dev)
--		return -ENOMEM;
-+		return NULL;
- 
- 	net_dev->netdev_ops = &bgmac_netdev_ops;
- 	net_dev->ethtool_ops = &bgmac_ethtool_ops;
-+
- 	bgmac = netdev_priv(net_dev);
--	memcpy(bgmac, info, sizeof(*bgmac));
-+	bgmac->dev = dev;
- 	bgmac->net_dev = net_dev;
-+
-+	return bgmac;
-+}
-+EXPORT_SYMBOL_GPL(bgmac_alloc);
-+
-+int bgmac_enet_probe(struct bgmac *bgmac)
-+{
-+	struct net_device *net_dev = bgmac->net_dev;
-+	int err;
-+
- 	net_dev->irq = bgmac->irq;
- 	SET_NETDEV_DEV(net_dev, bgmac->dev);
- 
-@@ -1502,7 +1512,7 @@ int bgmac_enet_probe(struct bgmac *info)
- 	err = bgmac_dma_alloc(bgmac);
- 	if (err) {
- 		dev_err(bgmac->dev, "Unable to alloc memory for DMA\n");
--		goto err_netdev_free;
-+		goto err_out;
- 	}
- 
- 	bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
-@@ -1538,8 +1548,7 @@ err_phy_disconnect:
- 	phy_disconnect(net_dev->phydev);
- err_dma_free:
- 	bgmac_dma_free(bgmac);
--err_netdev_free:
--	free_netdev(net_dev);
-+err_out:
- 
- 	return err;
- }
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -515,7 +515,8 @@ struct bgmac {
- 			      u32 set);
- };
- 
--int bgmac_enet_probe(struct bgmac *info);
-+struct bgmac *bgmac_alloc(struct device *dev);
-+int bgmac_enet_probe(struct bgmac *bgmac);
- void bgmac_enet_remove(struct bgmac *bgmac);
- 
- struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr);
diff --git a/target/linux/generic/backport-4.9/071-v4.10-0002-net-bgmac-drop-struct-bcma_mdio-we-don-t-need-anymor.patch b/target/linux/generic/backport-4.9/071-v4.10-0002-net-bgmac-drop-struct-bcma_mdio-we-don-t-need-anymor.patch
deleted file mode 100644
index 5e3d33375a..0000000000
--- a/target/linux/generic/backport-4.9/071-v4.10-0002-net-bgmac-drop-struct-bcma_mdio-we-don-t-need-anymor.patch
+++ /dev/null
@@ -1,261 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 31 Jan 2017 19:37:55 +0100
-Subject: [PATCH] net: bgmac: drop struct bcma_mdio we don't need anymore
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Adding struct bcma_mdio was a workaround for bcma code not having access
-to the struct bgmac used in the core code. Now we don't duplicate this
-struct we can just use it internally in bcma code.
-
-This simplifies code & allows access to all bgmac driver details from
-all places in bcma code.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -166,7 +166,7 @@ static int bgmac_probe(struct bcma_devic
- 
- 	if (!bgmac_is_bcm4707_family(core) &&
- 	    !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) {
--		mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr);
-+		mii_bus = bcma_mdio_mii_register(bgmac);
- 		if (IS_ERR(mii_bus)) {
- 			err = PTR_ERR(mii_bus);
- 			goto err;
---- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
-@@ -12,11 +12,6 @@
- #include <linux/brcmphy.h>
- #include "bgmac.h"
- 
--struct bcma_mdio {
--	struct bcma_device *core;
--	u8 phyaddr;
--};
--
- static bool bcma_mdio_wait_value(struct bcma_device *core, u16 reg, u32 mask,
- 				 u32 value, int timeout)
- {
-@@ -37,7 +32,7 @@ static bool bcma_mdio_wait_value(struct
-  * PHY ops
-  **************************************************/
- 
--static u16 bcma_mdio_phy_read(struct bcma_mdio *bcma_mdio, u8 phyaddr, u8 reg)
-+static u16 bcma_mdio_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg)
- {
- 	struct bcma_device *core;
- 	u16 phy_access_addr;
-@@ -56,12 +51,12 @@ static u16 bcma_mdio_phy_read(struct bcm
- 	BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT);
- 	BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE);
- 
--	if (bcma_mdio->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
--		core = bcma_mdio->core->bus->drv_gmac_cmn.core;
-+	if (bgmac->bcma.core->id.id == BCMA_CORE_4706_MAC_GBIT) {
-+		core = bgmac->bcma.core->bus->drv_gmac_cmn.core;
- 		phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
- 		phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
- 	} else {
--		core = bcma_mdio->core;
-+		core = bgmac->bcma.core;
- 		phy_access_addr = BGMAC_PHY_ACCESS;
- 		phy_ctl_addr = BGMAC_PHY_CNTL;
- 	}
-@@ -87,7 +82,7 @@ static u16 bcma_mdio_phy_read(struct bcm
- }
- 
- /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */
--static int bcma_mdio_phy_write(struct bcma_mdio *bcma_mdio, u8 phyaddr, u8 reg,
-+static int bcma_mdio_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg,
- 			       u16 value)
- {
- 	struct bcma_device *core;
-@@ -95,12 +90,12 @@ static int bcma_mdio_phy_write(struct bc
- 	u16 phy_ctl_addr;
- 	u32 tmp;
- 
--	if (bcma_mdio->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
--		core = bcma_mdio->core->bus->drv_gmac_cmn.core;
-+	if (bgmac->bcma.core->id.id == BCMA_CORE_4706_MAC_GBIT) {
-+		core = bgmac->bcma.core->bus->drv_gmac_cmn.core;
- 		phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
- 		phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
- 	} else {
--		core = bcma_mdio->core;
-+		core = bgmac->bcma.core;
- 		phy_access_addr = BGMAC_PHY_ACCESS;
- 		phy_ctl_addr = BGMAC_PHY_CNTL;
- 	}
-@@ -110,8 +105,8 @@ static int bcma_mdio_phy_write(struct bc
- 	tmp |= phyaddr;
- 	bcma_write32(core, phy_ctl_addr, tmp);
- 
--	bcma_write32(bcma_mdio->core, BGMAC_INT_STATUS, BGMAC_IS_MDIO);
--	if (bcma_read32(bcma_mdio->core, BGMAC_INT_STATUS) & BGMAC_IS_MDIO)
-+	bcma_write32(bgmac->bcma.core, BGMAC_INT_STATUS, BGMAC_IS_MDIO);
-+	if (bcma_read32(bgmac->bcma.core, BGMAC_INT_STATUS) & BGMAC_IS_MDIO)
- 		dev_warn(&core->dev, "Error setting MDIO int\n");
- 
- 	tmp = BGMAC_PA_START;
-@@ -132,39 +127,39 @@ static int bcma_mdio_phy_write(struct bc
- }
- 
- /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
--static void bcma_mdio_phy_init(struct bcma_mdio *bcma_mdio)
-+static void bcma_mdio_phy_init(struct bgmac *bgmac)
- {
--	struct bcma_chipinfo *ci = &bcma_mdio->core->bus->chipinfo;
-+	struct bcma_chipinfo *ci = &bgmac->bcma.core->bus->chipinfo;
- 	u8 i;
- 
- 	if (ci->id == BCMA_CHIP_ID_BCM5356) {
- 		for (i = 0; i < 5; i++) {
--			bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x008b);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x15, 0x0100);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x12, 0x2aaa);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b);
-+			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x008b);
-+			bcma_mdio_phy_write(bgmac, i, 0x15, 0x0100);
-+			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000f);
-+			bcma_mdio_phy_write(bgmac, i, 0x12, 0x2aaa);
-+			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
- 		}
- 	}
- 	if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) ||
- 	    (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) ||
- 	    (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) {
--		struct bcma_drv_cc *cc = &bcma_mdio->core->bus->drv_cc;
-+		struct bcma_drv_cc *cc = &bgmac->bcma.core->bus->drv_cc;
- 
- 		bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0);
- 		bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0);
- 		for (i = 0; i < 5; i++) {
--			bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x5284);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x0010);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000f);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x5296);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x1073);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x9073);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x16, 0x52b6);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x17, 0x9273);
--			bcma_mdio_phy_write(bcma_mdio, i, 0x1f, 0x000b);
-+			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000f);
-+			bcma_mdio_phy_write(bgmac, i, 0x16, 0x5284);
-+			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
-+			bcma_mdio_phy_write(bgmac, i, 0x17, 0x0010);
-+			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000f);
-+			bcma_mdio_phy_write(bgmac, i, 0x16, 0x5296);
-+			bcma_mdio_phy_write(bgmac, i, 0x17, 0x1073);
-+			bcma_mdio_phy_write(bgmac, i, 0x17, 0x9073);
-+			bcma_mdio_phy_write(bgmac, i, 0x16, 0x52b6);
-+			bcma_mdio_phy_write(bgmac, i, 0x17, 0x9273);
-+			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
- 		}
- 	}
- }
-@@ -172,17 +167,17 @@ static void bcma_mdio_phy_init(struct bc
- /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */
- static int bcma_mdio_phy_reset(struct mii_bus *bus)
- {
--	struct bcma_mdio *bcma_mdio = bus->priv;
--	u8 phyaddr = bcma_mdio->phyaddr;
-+	struct bgmac *bgmac = bus->priv;
-+	u8 phyaddr = bgmac->phyaddr;
- 
--	if (bcma_mdio->phyaddr == BGMAC_PHY_NOREGS)
-+	if (phyaddr == BGMAC_PHY_NOREGS)
- 		return 0;
- 
--	bcma_mdio_phy_write(bcma_mdio, phyaddr, MII_BMCR, BMCR_RESET);
-+	bcma_mdio_phy_write(bgmac, phyaddr, MII_BMCR, BMCR_RESET);
- 	udelay(100);
--	if (bcma_mdio_phy_read(bcma_mdio, phyaddr, MII_BMCR) & BMCR_RESET)
--		dev_err(&bcma_mdio->core->dev, "PHY reset failed\n");
--	bcma_mdio_phy_init(bcma_mdio);
-+	if (bcma_mdio_phy_read(bgmac, phyaddr, MII_BMCR) & BMCR_RESET)
-+		dev_err(bgmac->dev, "PHY reset failed\n");
-+	bcma_mdio_phy_init(bgmac);
- 
- 	return 0;
- }
-@@ -202,16 +197,12 @@ static int bcma_mdio_mii_write(struct mi
- 	return bcma_mdio_phy_write(bus->priv, mii_id, regnum, value);
- }
- 
--struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr)
-+struct mii_bus *bcma_mdio_mii_register(struct bgmac *bgmac)
- {
--	struct bcma_mdio *bcma_mdio;
-+	struct bcma_device *core = bgmac->bcma.core;
- 	struct mii_bus *mii_bus;
- 	int err;
- 
--	bcma_mdio = kzalloc(sizeof(*bcma_mdio), GFP_KERNEL);
--	if (!bcma_mdio)
--		return ERR_PTR(-ENOMEM);
--
- 	mii_bus = mdiobus_alloc();
- 	if (!mii_bus) {
- 		err = -ENOMEM;
-@@ -221,15 +212,12 @@ struct mii_bus *bcma_mdio_mii_register(s
- 	mii_bus->name = "bcma_mdio mii bus";
- 	sprintf(mii_bus->id, "%s-%d-%d", "bcma_mdio", core->bus->num,
- 		core->core_unit);
--	mii_bus->priv = bcma_mdio;
-+	mii_bus->priv = bgmac;
- 	mii_bus->read = bcma_mdio_mii_read;
- 	mii_bus->write = bcma_mdio_mii_write;
- 	mii_bus->reset = bcma_mdio_phy_reset;
- 	mii_bus->parent = &core->dev;
--	mii_bus->phy_mask = ~(1 << phyaddr);
--
--	bcma_mdio->core = core;
--	bcma_mdio->phyaddr = phyaddr;
-+	mii_bus->phy_mask = ~(1 << bgmac->phyaddr);
- 
- 	err = mdiobus_register(mii_bus);
- 	if (err) {
-@@ -242,23 +230,17 @@ struct mii_bus *bcma_mdio_mii_register(s
- err_free_bus:
- 	mdiobus_free(mii_bus);
- err:
--	kfree(bcma_mdio);
- 	return ERR_PTR(err);
- }
- EXPORT_SYMBOL_GPL(bcma_mdio_mii_register);
- 
- void bcma_mdio_mii_unregister(struct mii_bus *mii_bus)
- {
--	struct bcma_mdio *bcma_mdio;
--
- 	if (!mii_bus)
- 		return;
- 
--	bcma_mdio = mii_bus->priv;
--
- 	mdiobus_unregister(mii_bus);
- 	mdiobus_free(mii_bus);
--	kfree(bcma_mdio);
- }
- EXPORT_SYMBOL_GPL(bcma_mdio_mii_unregister);
- 
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -519,7 +519,7 @@ struct bgmac *bgmac_alloc(struct device
- int bgmac_enet_probe(struct bgmac *bgmac);
- void bgmac_enet_remove(struct bgmac *bgmac);
- 
--struct mii_bus *bcma_mdio_mii_register(struct bcma_device *core, u8 phyaddr);
-+struct mii_bus *bcma_mdio_mii_register(struct bgmac *bgmac);
- void bcma_mdio_mii_unregister(struct mii_bus *mii_bus);
- 
- static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset)
diff --git a/target/linux/generic/backport-4.9/071-v4.10-0003-net-bgmac-use-PHY-subsystem-for-initializing-PHY.patch b/target/linux/generic/backport-4.9/071-v4.10-0003-net-bgmac-use-PHY-subsystem-for-initializing-PHY.patch
deleted file mode 100644
index d1be3e3f4c..0000000000
--- a/target/linux/generic/backport-4.9/071-v4.10-0003-net-bgmac-use-PHY-subsystem-for-initializing-PHY.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 8e6f31baba7e2c13ab7e954fe6179420a7545a8b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 31 Jan 2017 19:37:56 +0100
-Subject: [PATCH 3/3] net: bgmac: use PHY subsystem for initializing PHY
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds support for using bgmac with PHYs supported by standalone PHY
-drivers. Having any PHY initialization in bgmac is hacky and shouldn't
-be extended but rather removed if anyone has hardware to test it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
-@@ -132,6 +132,10 @@ static void bcma_mdio_phy_init(struct bg
- 	struct bcma_chipinfo *ci = &bgmac->bcma.core->bus->chipinfo;
- 	u8 i;
- 
-+	/* For some legacy hardware we do chipset-based PHY initialization here
-+	 * without even detecting PHY ID. It's hacky and should be cleaned as
-+	 * soon as someone can test it.
-+	 */
- 	if (ci->id == BCMA_CHIP_ID_BCM5356) {
- 		for (i = 0; i < 5; i++) {
- 			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x008b);
-@@ -140,6 +144,7 @@ static void bcma_mdio_phy_init(struct bg
- 			bcma_mdio_phy_write(bgmac, i, 0x12, 0x2aaa);
- 			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
- 		}
-+		return;
- 	}
- 	if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) ||
- 	    (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) ||
-@@ -161,7 +166,12 @@ static void bcma_mdio_phy_init(struct bg
- 			bcma_mdio_phy_write(bgmac, i, 0x17, 0x9273);
- 			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
- 		}
-+		return;
- 	}
-+
-+	/* For all other hw do initialization using PHY subsystem. */
-+	if (bgmac->net_dev && bgmac->net_dev->phydev)
-+		phy_init_hw(bgmac->net_dev->phydev);
- }
- 
- /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */
diff --git a/target/linux/generic/backport-4.9/071-v4.15-0001-net-bgmac-enable-master-mode-for-BCM54210E-and-B5021.patch b/target/linux/generic/backport-4.9/071-v4.15-0001-net-bgmac-enable-master-mode-for-BCM54210E-and-B5021.patch
deleted file mode 100644
index 772ee61c08..0000000000
--- a/target/linux/generic/backport-4.9/071-v4.15-0001-net-bgmac-enable-master-mode-for-BCM54210E-and-B5021.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 12acd136913ccdf394eeb2bc8686ff5505368119 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Oct 2017 10:21:26 +0200
-Subject: [PATCH] net: bgmac: enable master mode for BCM54210E and B50212E PHYs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are 4 very similar PHYs:
-0x600d84a1: BCM54210E (rev B0)
-0x600d84a2: BCM54210E (rev B1)
-0x600d84a5: B50212E (rev B0)
-0x600d84a6: B50212E (rev B1)
-that need setting master mode manually. It's because they run in slave
-mode by default with Automatic Slave/Master configuration disabled which
-can lead to unreliable connection with massive ping loss.
-
-So far it was reported for a board with BCM47189 SoC and B50212E B1 PHY
-connected to the bgmac supported ethernet device. Telling PHY driver to
-setup PHY properly solves this issue.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -166,13 +166,19 @@ static int bgmac_probe(struct bcma_devic
- 
- 	if (!bgmac_is_bcm4707_family(core) &&
- 	    !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) {
-+		struct phy_device *phydev;
-+
- 		mii_bus = bcma_mdio_mii_register(bgmac);
- 		if (IS_ERR(mii_bus)) {
- 			err = PTR_ERR(mii_bus);
- 			goto err;
- 		}
--
- 		bgmac->mii_bus = mii_bus;
-+
-+		phydev = mdiobus_get_phy(bgmac->mii_bus, bgmac->phyaddr);
-+		if (ci->id == BCMA_CHIP_ID_BCM53573 && phydev &&
-+		    (phydev->drv->phy_id & phydev->drv->phy_id_mask) == PHY_ID_BCM54210E)
-+			phydev->dev_flags |= PHY_BRCM_EN_MASTER_MODE;
- 	}
- 
- 	if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
diff --git a/target/linux/generic/backport-4.9/072-bcma-from-4.12.patch b/target/linux/generic/backport-4.9/072-bcma-from-4.12.patch
deleted file mode 100644
index 23f2656ab5..0000000000
--- a/target/linux/generic/backport-4.9/072-bcma-from-4.12.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -185,8 +185,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- 	chip->owner		= THIS_MODULE;
- 	chip->parent		= bcma_bus_get_host_dev(bus);
- #if IS_BUILTIN(CONFIG_OF)
--	if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
--		chip->of_node	= cc->core->dev.of_node;
-+	chip->of_node		= cc->core->dev.of_node;
- #endif
- 	switch (bus->chipinfo.id) {
- 	case BCMA_CHIP_ID_BCM4707:
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -201,9 +201,6 @@ static void bcma_of_fill_device(struct d
- {
- 	struct device_node *node;
- 
--	if (!IS_ENABLED(CONFIG_OF_IRQ))
--		return;
--
- 	node = bcma_of_find_child_device(parent, core);
- 	if (node)
- 		core->dev.of_node = node;
-@@ -242,19 +239,18 @@ void bcma_prepare_core(struct bcma_bus *
- 	core->dev.release = bcma_release_core_dev;
- 	core->dev.bus = &bcma_bus_type;
- 	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
-+	core->dev.parent = bcma_bus_get_host_dev(bus);
-+	if (core->dev.parent)
-+		bcma_of_fill_device(core->dev.parent, core);
- 
- 	switch (bus->hosttype) {
- 	case BCMA_HOSTTYPE_PCI:
--		core->dev.parent = &bus->host_pci->dev;
- 		core->dma_dev = &bus->host_pci->dev;
- 		core->irq = bus->host_pci->irq;
- 		break;
- 	case BCMA_HOSTTYPE_SOC:
- 		if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) {
- 			core->dma_dev = &bus->host_pdev->dev;
--			core->dev.parent = &bus->host_pdev->dev;
--			if (core->dev.parent)
--				bcma_of_fill_device(core->dev.parent, core);
- 		} else {
- 			core->dev.dma_mask = &core->dev.coherent_dma_mask;
- 			core->dma_dev = &core->dev;
diff --git a/target/linux/generic/backport-4.9/075-v4.10-0001-net-phy-broadcom-Update-Auxiliary-Control-Register-m.patch b/target/linux/generic/backport-4.9/075-v4.10-0001-net-phy-broadcom-Update-Auxiliary-Control-Register-m.patch
deleted file mode 100644
index 9279a7c84c..0000000000
--- a/target/linux/generic/backport-4.9/075-v4.10-0001-net-phy-broadcom-Update-Auxiliary-Control-Register-m.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Xo Wang <xow@google.com>
-Date: Fri, 21 Oct 2016 10:20:12 -0700
-Subject: [PATCH] net: phy: broadcom: Update Auxiliary Control Register macros
-
-Add the RXD-to-RXC skew (delay) time bit in the Miscellaneous Control
-shadow register and a mask for the shadow selector field.
-
-Remove a re-definition of MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL.
-
-Signed-off-by: Xo Wang <xow@google.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Joel Stanley <joel@jms.id.au>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -101,6 +101,7 @@
-  * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
-  */
- #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
-+#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW	0x0100
- #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
- #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
- 
-@@ -109,7 +110,7 @@
- #define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
- #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
- 
--#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
-+#define MII_BCM54XX_AUXCTL_SHDWSEL_MASK	0x0007
- 
- /*
-  * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
diff --git a/target/linux/generic/backport-4.9/075-v4.10-0002-net-phy-broadcom-Add-support-for-BCM54612E.patch b/target/linux/generic/backport-4.9/075-v4.10-0002-net-phy-broadcom-Add-support-for-BCM54612E.patch
deleted file mode 100644
index 4caa7b193d..0000000000
--- a/target/linux/generic/backport-4.9/075-v4.10-0002-net-phy-broadcom-Add-support-for-BCM54612E.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From: Xo Wang <xow@google.com>
-Date: Fri, 21 Oct 2016 10:20:13 -0700
-Subject: [PATCH] net: phy: broadcom: Add support for BCM54612E
-
-This PHY has internal delays enabled after reset. This clears the
-internal delay enables unless the interface specifically requests them.
-
-Signed-off-by: Xo Wang <xow@google.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Joel Stanley <joel@jms.id.au>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -337,6 +337,41 @@ static int bcm5481_config_aneg(struct ph
- 	return ret;
- }
- 
-+static int bcm54612e_config_aneg(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* First, auto-negotiate. */
-+	ret = genphy_config_aneg(phydev);
-+
-+	/* Clear TX internal delay unless requested. */
-+	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
-+	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
-+		/* Disable TXD to GTXCLK clock delay (default set) */
-+		/* Bit 9 is the only field in shadow register 00011 */
-+		bcm_phy_write_shadow(phydev, 0x03, 0);
-+	}
-+
-+	/* Clear RX internal delay unless requested. */
-+	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
-+	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
-+		u16 reg;
-+
-+		/* Errata: reads require filling in the write selector field */
-+		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
-+				     MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
-+		reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
-+		/* Disable RXD to RXC delay (default set) */
-+		reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
-+		/* Clear shadow selector field */
-+		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
-+		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
-+				     MII_BCM54XX_AUXCTL_MISC_WREN | reg);
-+	}
-+
-+	return ret;
-+}
-+
- static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
- {
- 	int val;
-@@ -485,6 +520,18 @@ static struct phy_driver broadcom_driver
- 	.ack_interrupt	= bcm_phy_ack_intr,
- 	.config_intr	= bcm_phy_config_intr,
- }, {
-+	.phy_id		= PHY_ID_BCM54612E,
-+	.phy_id_mask	= 0xfffffff0,
-+	.name		= "Broadcom BCM54612E",
-+	.features	= PHY_GBIT_FEATURES |
-+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-+	.config_init	= bcm54xx_config_init,
-+	.config_aneg	= bcm54612e_config_aneg,
-+	.read_status	= genphy_read_status,
-+	.ack_interrupt	= bcm_phy_ack_intr,
-+	.config_intr	= bcm_phy_config_intr,
-+}, {
- 	.phy_id		= PHY_ID_BCM54616S,
- 	.phy_id_mask	= 0xfffffff0,
- 	.name		= "Broadcom BCM54616S",
-@@ -600,6 +647,7 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_BCM5411, 0xfffffff0 },
- 	{ PHY_ID_BCM5421, 0xfffffff0 },
- 	{ PHY_ID_BCM5461, 0xfffffff0 },
-+	{ PHY_ID_BCM54612E, 0xfffffff0 },
- 	{ PHY_ID_BCM54616S, 0xfffffff0 },
- 	{ PHY_ID_BCM5464, 0xfffffff0 },
- 	{ PHY_ID_BCM5481, 0xfffffff0 },
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -18,6 +18,7 @@
- #define PHY_ID_BCM5421			0x002060e0
- #define PHY_ID_BCM5464			0x002060b0
- #define PHY_ID_BCM5461			0x002060c0
-+#define PHY_ID_BCM54612E		0x03625e60
- #define PHY_ID_BCM54616S		0x03625d10
- #define PHY_ID_BCM57780			0x03625d90
- 
diff --git a/target/linux/generic/backport-4.9/075-v4.10-0003-net-phy-broadcom-add-bcm54xx_auxctl_read.patch b/target/linux/generic/backport-4.9/075-v4.10-0003-net-phy-broadcom-add-bcm54xx_auxctl_read.patch
deleted file mode 100644
index c9b3b5911e..0000000000
--- a/target/linux/generic/backport-4.9/075-v4.10-0003-net-phy-broadcom-add-bcm54xx_auxctl_read.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Jon Mason <jon.mason@broadcom.com>
-Date: Fri, 4 Nov 2016 01:10:56 -0400
-Subject: [PATCH] net: phy: broadcom: add bcm54xx_auxctl_read
-
-Add a helper function to read the AUXCTL register for the BCM54xx.  This
-mirrors the bcm54xx_auxctl_write function already present in the code.
-
-Signed-off-by: Jon Mason <jon.mason@broadcom.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -30,6 +30,16 @@ MODULE_DESCRIPTION("Broadcom PHY driver"
- MODULE_AUTHOR("Maciej W. Rozycki");
- MODULE_LICENSE("GPL");
- 
-+static int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
-+{
-+	/* The register must be written to both the Shadow Register Select and
-+	 * the Shadow Read Register Selector
-+	 */
-+	phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum |
-+		  regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT);
-+	return phy_read(phydev, MII_BCM54XX_AUX_CTL);
-+}
-+
- static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
- {
- 	return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -110,6 +110,7 @@
- #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
- #define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
- #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
-+#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT	12
- 
- #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK	0x0007
- 
diff --git a/target/linux/generic/backport-4.9/075-v4.10-0004-net-phy-broadcom-Add-BCM54810-PHY-entry.patch b/target/linux/generic/backport-4.9/075-v4.10-0004-net-phy-broadcom-Add-BCM54810-PHY-entry.patch
deleted file mode 100644
index 3d61ec6369..0000000000
--- a/target/linux/generic/backport-4.9/075-v4.10-0004-net-phy-broadcom-Add-BCM54810-PHY-entry.patch
+++ /dev/null
@@ -1,176 +0,0 @@
-From: Jon Mason <jon.mason@broadcom.com>
-Date: Fri, 4 Nov 2016 01:10:58 -0400
-Subject: [PATCH] net: phy: broadcom: Add BCM54810 PHY entry
-
-The BCM54810 PHY requires some semi-unique configuration, which results
-in some additional configuration in addition to the standard config.
-Also, some users of the BCM54810 require the PHY lanes to be swapped.
-Since there is no way to detect this, add a device tree query to see if
-it is applicable.
-
-Inspired-by: Vikas Soni <vsoni@broadcom.com>
-Signed-off-by: Jon Mason <jon.mason@broadcom.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -18,7 +18,7 @@
- #include <linux/module.h>
- #include <linux/phy.h>
- #include <linux/brcmphy.h>
--
-+#include <linux/of.h>
- 
- #define BRCM_PHY_MODEL(phydev) \
- 	((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
-@@ -45,6 +45,34 @@ static int bcm54xx_auxctl_write(struct p
- 	return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
- }
- 
-+static int bcm54810_config(struct phy_device *phydev)
-+{
-+	int rc, val;
-+
-+	val = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
-+	val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
-+	rc = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
-+			       val);
-+	if (rc < 0)
-+		return rc;
-+
-+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-+	val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
-+	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
-+	rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
-+				  val);
-+	if (rc < 0)
-+		return rc;
-+
-+	val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
-+	val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
-+	rc = bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
-+	if (rc < 0)
-+		return rc;
-+
-+	return 0;
-+}
-+
- /* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
- static int bcm50610_a0_workaround(struct phy_device *phydev)
- {
-@@ -217,6 +245,12 @@ static int bcm54xx_config_init(struct ph
- 	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
- 		bcm54xx_adjust_rxrefclk(phydev);
- 
-+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
-+		err = bcm54810_config(phydev);
-+		if (err)
-+			return err;
-+	}
-+
- 	bcm54xx_phydsp_config(phydev);
- 
- 	return 0;
-@@ -314,6 +348,7 @@ static int bcm5482_read_status(struct ph
- 
- static int bcm5481_config_aneg(struct phy_device *phydev)
- {
-+	struct device_node *np = phydev->mdio.dev.of_node;
- 	int ret;
- 
- 	/* Aneg firsly. */
-@@ -344,6 +379,14 @@ static int bcm5481_config_aneg(struct ph
- 		phy_write(phydev, 0x18, reg);
- 	}
- 
-+	if (of_property_read_bool(np, "enet-phy-lane-swap")) {
-+		/* Lane Swap - Undocumented register...magic! */
-+		ret = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_SEL_ER + 0x9,
-+					0x11B);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
- 	return ret;
- }
- 
-@@ -578,6 +621,18 @@ static struct phy_driver broadcom_driver
- 	.ack_interrupt	= bcm_phy_ack_intr,
- 	.config_intr	= bcm_phy_config_intr,
- }, {
-+	.phy_id         = PHY_ID_BCM54810,
-+	.phy_id_mask    = 0xfffffff0,
-+	.name           = "Broadcom BCM54810",
-+	.features       = PHY_GBIT_FEATURES |
-+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-+	.flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-+	.config_init    = bcm54xx_config_init,
-+	.config_aneg    = bcm5481_config_aneg,
-+	.read_status    = genphy_read_status,
-+	.ack_interrupt  = bcm_phy_ack_intr,
-+	.config_intr    = bcm_phy_config_intr,
-+}, {
- 	.phy_id		= PHY_ID_BCM5482,
- 	.phy_id_mask	= 0xfffffff0,
- 	.name		= "Broadcom BCM5482",
-@@ -661,6 +716,7 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_BCM54616S, 0xfffffff0 },
- 	{ PHY_ID_BCM5464, 0xfffffff0 },
- 	{ PHY_ID_BCM5481, 0xfffffff0 },
-+	{ PHY_ID_BCM54810, 0xfffffff0 },
- 	{ PHY_ID_BCM5482, 0xfffffff0 },
- 	{ PHY_ID_BCM50610, 0xfffffff0 },
- 	{ PHY_ID_BCM50610M, 0xfffffff0 },
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -204,7 +204,7 @@ config BROADCOM_PHY
- 	select BCM_NET_PHYLIB
- 	---help---
- 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
--	  BCM5481 and BCM5482 PHYs.
-+	  BCM5481, BCM54810 and BCM5482 PHYs.
- 
- config CICADA_PHY
- 	tristate "Cicada PHYs"
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -13,6 +13,7 @@
- #define PHY_ID_BCM5241			0x0143bc30
- #define PHY_ID_BCMAC131			0x0143bc70
- #define PHY_ID_BCM5481			0x0143bca0
-+#define PHY_ID_BCM54810			0x03625d00
- #define PHY_ID_BCM5482			0x0143bcb0
- #define PHY_ID_BCM5411			0x00206070
- #define PHY_ID_BCM5421			0x002060e0
-@@ -56,6 +57,7 @@
- #define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00002000
- #define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
- #define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
-+
- /* Broadcom BCM7xxx specific workarounds */
- #define PHY_BRCM_7XXX_REV(x)		(((x) >> 8) & 0xff)
- #define PHY_BRCM_7XXX_PATCH(x)		((x) & 0xff)
-@@ -111,6 +113,7 @@
- #define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
- #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
- #define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT	12
-+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	(1 << 8)
- 
- #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK	0x0007
- 
-@@ -192,6 +195,12 @@
- #define BCM5482_SSD_SGMII_SLAVE_EN	0x0002	/* Slave mode enable */
- #define BCM5482_SSD_SGMII_SLAVE_AD	0x0001	/* Slave auto-detection */
- 
-+/* BCM54810 Registers */
-+#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL	(MII_BCM54XX_EXP_SEL_ER + 0x90)
-+#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN	(1 << 0)
-+#define BCM54810_SHD_CLK_CTL			0x3
-+#define BCM54810_SHD_CLK_CTL_GTXCLK_EN		(1 << 9)
-+
- 
- /*****************************************************************************/
- /* Fast Ethernet Transceiver definitions. */
diff --git a/target/linux/generic/backport-4.9/075-v4.10-0005-net-phy-broadcom-Move-bcm54xx_auxctl_-read-write-to-.patch b/target/linux/generic/backport-4.9/075-v4.10-0005-net-phy-broadcom-Move-bcm54xx_auxctl_-read-write-to-.patch
deleted file mode 100644
index c8bf54c781..0000000000
--- a/target/linux/generic/backport-4.9/075-v4.10-0005-net-phy-broadcom-Move-bcm54xx_auxctl_-read-write-to-.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 22 Nov 2016 11:40:54 -0800
-Subject: [PATCH] net: phy: broadcom: Move bcm54xx_auxctl_{read, write} to
- common library
-
-We are going to need these functions to implement support for Broadcom
-Wirespeed, aka downshift.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/bcm-phy-lib.c
-+++ b/drivers/net/phy/bcm-phy-lib.c
-@@ -50,6 +50,23 @@ int bcm_phy_read_exp(struct phy_device *
- }
- EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
- 
-+int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
-+{
-+	/* The register must be written to both the Shadow Register Select and
-+	 * the Shadow Read Register Selector
-+	 */
-+	phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum |
-+		  regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT);
-+	return phy_read(phydev, MII_BCM54XX_AUX_CTL);
-+}
-+EXPORT_SYMBOL_GPL(bcm54xx_auxctl_read);
-+
-+int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
-+{
-+	return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
-+}
-+EXPORT_SYMBOL(bcm54xx_auxctl_write);
-+
- int bcm_phy_write_misc(struct phy_device *phydev,
- 		       u16 reg, u16 chl, u16 val)
- {
---- a/drivers/net/phy/bcm-phy-lib.h
-+++ b/drivers/net/phy/bcm-phy-lib.h
-@@ -26,6 +26,9 @@ static inline int bcm_phy_write_exp_sel(
- 	return bcm_phy_write_exp(phydev, reg | MII_BCM54XX_EXP_SEL_ER, val);
- }
- 
-+int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val);
-+int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum);
-+
- int bcm_phy_write_misc(struct phy_device *phydev,
- 		       u16 reg, u16 chl, u16 value);
- int bcm_phy_read_misc(struct phy_device *phydev,
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -30,21 +30,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver"
- MODULE_AUTHOR("Maciej W. Rozycki");
- MODULE_LICENSE("GPL");
- 
--static int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
--{
--	/* The register must be written to both the Shadow Register Select and
--	 * the Shadow Read Register Selector
--	 */
--	phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum |
--		  regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT);
--	return phy_read(phydev, MII_BCM54XX_AUX_CTL);
--}
--
--static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
--{
--	return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
--}
--
- static int bcm54810_config(struct phy_device *phydev)
- {
- 	int rc, val;
diff --git a/target/linux/generic/backport-4.9/076-v4.11-0001-net-phy-broadcom-Allow-enabling-or-disabling-of-EEE.patch b/target/linux/generic/backport-4.9/076-v4.11-0001-net-phy-broadcom-Allow-enabling-or-disabling-of-EEE.patch
deleted file mode 100644
index 35eee772dd..0000000000
--- a/target/linux/generic/backport-4.9/076-v4.11-0001-net-phy-broadcom-Allow-enabling-or-disabling-of-EEE.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 22 Nov 2016 11:40:56 -0800
-Subject: [PATCH] net: phy: broadcom: Allow enabling or disabling of EEE
-
-In preparation for adding support for Wirespeed/downshift, we need to
-change bcm_phy_eee_enable() to allow enabling or disabling EEE, so make
-the function take an extra enable/disable boolean parameter and rename
-it to illustrate it sets EEE, not necessarily just enables it.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/bcm7xxx.c
-+++ b/drivers/net/phy/bcm7xxx.c
-@@ -199,7 +199,7 @@ static int bcm7xxx_28nm_config_init(stru
- 	if (ret)
- 		return ret;
- 
--	ret = bcm_phy_enable_eee(phydev);
-+	ret = bcm_phy_set_eee(phydev, true);
- 	if (ret)
- 		return ret;
- 
---- a/drivers/net/phy/bcm-cygnus.c
-+++ b/drivers/net/phy/bcm-cygnus.c
-@@ -104,7 +104,7 @@ static int bcm_cygnus_config_init(struct
- 		return rc;
- 
- 	/* Advertise EEE */
--	rc = bcm_phy_enable_eee(phydev);
-+	rc = bcm_phy_set_eee(phydev, true);
- 	if (rc)
- 		return rc;
- 
---- a/drivers/net/phy/bcm-phy-lib.c
-+++ b/drivers/net/phy/bcm-phy-lib.c
-@@ -195,7 +195,7 @@ int bcm_phy_enable_apd(struct phy_device
- }
- EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
- 
--int bcm_phy_enable_eee(struct phy_device *phydev)
-+int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
- {
- 	int val;
- 
-@@ -205,7 +205,10 @@ int bcm_phy_enable_eee(struct phy_device
- 	if (val < 0)
- 		return val;
- 
--	val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
-+	if (enable)
-+		val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
-+	else
-+		val &= ~(LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X);
- 
- 	phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
- 			       MDIO_MMD_AN, (u32)val);
-@@ -216,14 +219,17 @@ int bcm_phy_enable_eee(struct phy_device
- 	if (val < 0)
- 		return val;
- 
--	val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
-+	if (enable)
-+		val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
-+	else
-+		val &= ~(MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
- 
- 	phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
- 			       MDIO_MMD_AN, (u32)val);
- 
- 	return 0;
- }
--EXPORT_SYMBOL_GPL(bcm_phy_enable_eee);
-+EXPORT_SYMBOL_GPL(bcm_phy_set_eee);
- 
- MODULE_DESCRIPTION("Broadcom PHY Library");
- MODULE_LICENSE("GPL v2");
---- a/drivers/net/phy/bcm-phy-lib.h
-+++ b/drivers/net/phy/bcm-phy-lib.h
-@@ -43,5 +43,5 @@ int bcm_phy_config_intr(struct phy_devic
- 
- int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down);
- 
--int bcm_phy_enable_eee(struct phy_device *phydev);
-+int bcm_phy_set_eee(struct phy_device *phydev, bool enable);
- #endif /* _LINUX_BCM_PHY_LIB_H */
diff --git a/target/linux/generic/backport-4.9/076-v4.11-0002-net-phy-broadcom-Add-support-code-for-reading-PHY-co.patch b/target/linux/generic/backport-4.9/076-v4.11-0002-net-phy-broadcom-Add-support-code-for-reading-PHY-co.patch
deleted file mode 100644
index 83cfe1f5d3..0000000000
--- a/target/linux/generic/backport-4.9/076-v4.11-0002-net-phy-broadcom-Add-support-code-for-reading-PHY-co.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 29 Nov 2016 09:57:17 -0800
-Subject: [PATCH] net: phy: broadcom: Add support code for reading PHY counters
-
-Broadcom PHYs expose a number of PHY error counters: receive errors,
-false carrier sense, SerDes BER count, local and remote receive errors.
-Add support code to allow retrieving these error counters. Since the
-Broadcom PHY library code is used by several drivers, make it possible
-for them to specify the storage for the software copy of the statistics.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/bcm-phy-lib.c
-+++ b/drivers/net/phy/bcm-phy-lib.c
-@@ -17,6 +17,7 @@
- #include <linux/mdio.h>
- #include <linux/module.h>
- #include <linux/phy.h>
-+#include <linux/ethtool.h>
- 
- #define MII_BCM_CHANNEL_WIDTH     0x2000
- #define BCM_CL45VEN_EEE_ADV       0x3c
-@@ -231,6 +232,75 @@ int bcm_phy_set_eee(struct phy_device *p
- }
- EXPORT_SYMBOL_GPL(bcm_phy_set_eee);
- 
-+struct bcm_phy_hw_stat {
-+	const char *string;
-+	u8 reg;
-+	u8 shift;
-+	u8 bits;
-+};
-+
-+/* Counters freeze at either 0xffff or 0xff, better than nothing */
-+static const struct bcm_phy_hw_stat bcm_phy_hw_stats[] = {
-+	{ "phy_receive_errors", MII_BRCM_CORE_BASE12, 0, 16 },
-+	{ "phy_serdes_ber_errors", MII_BRCM_CORE_BASE13, 8, 8 },
-+	{ "phy_false_carrier_sense_errors", MII_BRCM_CORE_BASE13, 0, 8 },
-+	{ "phy_local_rcvr_nok", MII_BRCM_CORE_BASE14, 8, 8 },
-+	{ "phy_remote_rcv_nok", MII_BRCM_CORE_BASE14, 0, 8 },
-+};
-+
-+int bcm_phy_get_sset_count(struct phy_device *phydev)
-+{
-+	return ARRAY_SIZE(bcm_phy_hw_stats);
-+}
-+EXPORT_SYMBOL_GPL(bcm_phy_get_sset_count);
-+
-+void bcm_phy_get_strings(struct phy_device *phydev, u8 *data)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++)
-+		memcpy(data + i * ETH_GSTRING_LEN,
-+		       bcm_phy_hw_stats[i].string, ETH_GSTRING_LEN);
-+}
-+EXPORT_SYMBOL_GPL(bcm_phy_get_strings);
-+
-+#ifndef UINT64_MAX
-+#define UINT64_MAX              (u64)(~((u64)0))
-+#endif
-+
-+/* Caller is supposed to provide appropriate storage for the library code to
-+ * access the shadow copy
-+ */
-+static u64 bcm_phy_get_stat(struct phy_device *phydev, u64 *shadow,
-+			    unsigned int i)
-+{
-+	struct bcm_phy_hw_stat stat = bcm_phy_hw_stats[i];
-+	int val;
-+	u64 ret;
-+
-+	val = phy_read(phydev, stat.reg);
-+	if (val < 0) {
-+		ret = UINT64_MAX;
-+	} else {
-+		val >>= stat.shift;
-+		val = val & ((1 << stat.bits) - 1);
-+		shadow[i] += val;
-+		ret = shadow[i];
-+	}
-+
-+	return ret;
-+}
-+
-+void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
-+		       struct ethtool_stats *stats, u64 *data)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++)
-+		data[i] = bcm_phy_get_stat(phydev, shadow, i);
-+}
-+EXPORT_SYMBOL_GPL(bcm_phy_get_stats);
-+
- MODULE_DESCRIPTION("Broadcom PHY Library");
- MODULE_LICENSE("GPL v2");
- MODULE_AUTHOR("Broadcom Corporation");
---- a/drivers/net/phy/bcm-phy-lib.h
-+++ b/drivers/net/phy/bcm-phy-lib.h
-@@ -44,4 +44,10 @@ int bcm_phy_config_intr(struct phy_devic
- int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down);
- 
- int bcm_phy_set_eee(struct phy_device *phydev, bool enable);
-+
-+int bcm_phy_get_sset_count(struct phy_device *phydev);
-+void bcm_phy_get_strings(struct phy_device *phydev, u8 *data);
-+void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
-+		       struct ethtool_stats *stats, u64 *data);
-+
- #endif /* _LINUX_BCM_PHY_LIB_H */
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -234,6 +234,9 @@
- #define LPI_FEATURE_EN_DIG1000X		0x4000
- 
- /* Core register definitions*/
-+#define MII_BRCM_CORE_BASE12	0x12
-+#define MII_BRCM_CORE_BASE13	0x13
-+#define MII_BRCM_CORE_BASE14	0x14
- #define MII_BRCM_CORE_BASE1E	0x1E
- #define MII_BRCM_CORE_EXPB0	0xB0
- #define MII_BRCM_CORE_EXPB1	0xB1
diff --git a/target/linux/generic/backport-4.9/076-v4.11-0003-net-phy-bcm7xxx-Add-entry-for-BCM7278.patch b/target/linux/generic/backport-4.9/076-v4.11-0003-net-phy-bcm7xxx-Add-entry-for-BCM7278.patch
deleted file mode 100644
index 8034f4b217..0000000000
--- a/target/linux/generic/backport-4.9/076-v4.11-0003-net-phy-bcm7xxx-Add-entry-for-BCM7278.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 20 Jan 2017 12:36:33 -0800
-Subject: [PATCH] net: phy: bcm7xxx: Add entry for BCM7278
-
-Add support for the BCM7278 28nm process Gigabit Ethernet PHY.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/bcm7xxx.c
-+++ b/drivers/net/phy/bcm7xxx.c
-@@ -334,6 +334,7 @@ static int bcm7xxx_suspend(struct phy_de
- 
- static struct phy_driver bcm7xxx_driver[] = {
- 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
-+	BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
- 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
- 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
- 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
-@@ -348,6 +349,7 @@ static struct phy_driver bcm7xxx_driver[
- 
- static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
- 	{ PHY_ID_BCM7250, 0xfffffff0, },
-+	{ PHY_ID_BCM7278, 0xfffffff0, },
- 	{ PHY_ID_BCM7364, 0xfffffff0, },
- 	{ PHY_ID_BCM7366, 0xfffffff0, },
- 	{ PHY_ID_BCM7346, 0xfffffff0, },
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -24,6 +24,7 @@
- #define PHY_ID_BCM57780			0x03625d90
- 
- #define PHY_ID_BCM7250			0xae025280
-+#define PHY_ID_BCM7278			0xae0251a0
- #define PHY_ID_BCM7364			0xae025260
- #define PHY_ID_BCM7366			0x600d8490
- #define PHY_ID_BCM7346			0x600d8650
diff --git a/target/linux/generic/backport-4.9/076-v4.11-0004-net-phy-bcm7xxx-Implement-EGPHY-workaround-for-7278.patch b/target/linux/generic/backport-4.9/076-v4.11-0004-net-phy-bcm7xxx-Implement-EGPHY-workaround-for-7278.patch
deleted file mode 100644
index 7aa4ee2c79..0000000000
--- a/target/linux/generic/backport-4.9/076-v4.11-0004-net-phy-bcm7xxx-Implement-EGPHY-workaround-for-7278.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 20 Jan 2017 12:36:34 -0800
-Subject: [PATCH] net: phy: bcm7xxx: Implement EGPHY workaround for 7278
-
-Implement the HW design team recommended workaround in for 7278. Since
-the GPHY now returns its revision information in MII_PHYS_ID[23] we need
-to check whether the revision provided in flags is 0 or not.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/bcm7xxx.c
-+++ b/drivers/net/phy/bcm7xxx.c
-@@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf
- 	return 0;
- }
- 
-+static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
-+{
-+	/* +1 RC_CAL codes for RL centering for both LT and HT conditions */
-+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003);
-+
-+	/* Cut master bias current by 2% to compensate for RC_CAL offset */
-+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b);
-+
-+	/* Improve hybrid leakage */
-+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3);
-+
-+	/* Change rx_on_tune 8 to 0xf */
-+	bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6);
-+
-+	/* Change 100Tx EEE bandwidth */
-+	bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d);
-+
-+	/* Enable ffe zero detection for Vitesse interoperability */
-+	bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
-+
-+	r_rc_cal_reset(phydev);
-+
-+	return 0;
-+}
-+
- static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
- {
- 	u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
- 	u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
- 	int ret = 0;
- 
-+	/* Newer devices have moved the revision information back into a
-+	 * standard location in MII_PHYS_ID[23]
-+	 */
-+	if (rev == 0)
-+		rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
-+
- 	pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
- 		     phydev_name(phydev), phydev->drv->name, rev, patch);
- 
-@@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru
- 	case 0x10:
- 		ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
- 		break;
-+	case 0x01:
-+		ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
-+		break;
- 	default:
- 		break;
- 	}
diff --git a/target/linux/generic/backport-4.9/076-v4.11-0005-net-phy-broadcom-use-auxctl-reading-helper-in-BCM546.patch b/target/linux/generic/backport-4.9/076-v4.11-0005-net-phy-broadcom-use-auxctl-reading-helper-in-BCM546.patch
deleted file mode 100644
index 554e3117d8..0000000000
--- a/target/linux/generic/backport-4.9/076-v4.11-0005-net-phy-broadcom-use-auxctl-reading-helper-in-BCM546.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 25 Jan 2017 21:00:25 +0100
-Subject: [PATCH] net: phy: broadcom: use auxctl reading helper in BCM54612E
- code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Starting with commit 5b4e29005123 ("net: phy: broadcom: add
-bcm54xx_auxctl_read") we have a reading helper so use it and avoid code
-duplication.
-It also means we don't need MII_BCM54XX_AUXCTL_SHDWSEL_MISC define as
-it's the same as MII_BCM54XX_AUXCTL_SHDWSEL_MISC just for reading needs
-(same value shifted by 12 bits).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -395,10 +395,8 @@ static int bcm54612e_config_aneg(struct
- 	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
- 		u16 reg;
- 
--		/* Errata: reads require filling in the write selector field */
--		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
--				     MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
--		reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
-+		reg = bcm54xx_auxctl_read(phydev,
-+					  MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
- 		/* Disable RXD to RXC delay (default set) */
- 		reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
- 		/* Clear shadow selector field */
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -111,7 +111,6 @@
- 
- #define MII_BCM54XX_AUXCTL_MISC_WREN	0x8000
- #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
--#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
- #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
- #define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT	12
- #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	(1 << 8)
diff --git a/target/linux/generic/backport-4.9/076-v4.11-0006-net-phy-broadcom-add-support-for-BCM54210E.patch b/target/linux/generic/backport-4.9/076-v4.11-0006-net-phy-broadcom-add-support-for-BCM54210E.patch
deleted file mode 100644
index 5fa7e88c53..0000000000
--- a/target/linux/generic/backport-4.9/076-v4.11-0006-net-phy-broadcom-add-support-for-BCM54210E.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 27 Jan 2017 14:07:01 +0100
-Subject: [PATCH] net: phy: broadcom: add support for BCM54210E
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's Broadcom PHY simply described as single-port
-RGMII 10/100/1000BASE-T PHY. It requires disabling delay skew and GTXCLK
-bits.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -30,6 +30,22 @@ MODULE_DESCRIPTION("Broadcom PHY driver"
- MODULE_AUTHOR("Maciej W. Rozycki");
- MODULE_LICENSE("GPL");
- 
-+static int bcm54210e_config_init(struct phy_device *phydev)
-+{
-+	int val;
-+
-+	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-+	val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
-+	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
-+	bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val);
-+
-+	val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
-+	val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
-+	bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
-+
-+	return 0;
-+}
-+
- static int bcm54810_config(struct phy_device *phydev)
- {
- 	int rc, val;
-@@ -230,7 +246,11 @@ static int bcm54xx_config_init(struct ph
- 	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
- 		bcm54xx_adjust_rxrefclk(phydev);
- 
--	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
-+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) {
-+		err = bcm54210e_config_init(phydev);
-+		if (err)
-+			return err;
-+	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
- 		err = bcm54810_config(phydev);
- 		if (err)
- 			return err;
-@@ -544,6 +564,17 @@ static struct phy_driver broadcom_driver
- 	.ack_interrupt	= bcm_phy_ack_intr,
- 	.config_intr	= bcm_phy_config_intr,
- }, {
-+	.phy_id		= PHY_ID_BCM54210E,
-+	.phy_id_mask	= 0xfffffff0,
-+	.name		= "Broadcom BCM54210E",
-+	.features	= PHY_GBIT_FEATURES,
-+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-+	.config_init	= bcm54xx_config_init,
-+	.config_aneg	= genphy_config_aneg,
-+	.read_status	= genphy_read_status,
-+	.ack_interrupt	= bcm_phy_ack_intr,
-+	.config_intr	= bcm_phy_config_intr,
-+}, {
- 	.phy_id		= PHY_ID_BCM5461,
- 	.phy_id_mask	= 0xfffffff0,
- 	.name		= "Broadcom BCM5461",
-@@ -694,6 +725,7 @@ module_phy_driver(broadcom_drivers);
- static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
- 	{ PHY_ID_BCM5411, 0xfffffff0 },
- 	{ PHY_ID_BCM5421, 0xfffffff0 },
-+	{ PHY_ID_BCM54210E, 0xfffffff0 },
- 	{ PHY_ID_BCM5461, 0xfffffff0 },
- 	{ PHY_ID_BCM54612E, 0xfffffff0 },
- 	{ PHY_ID_BCM54616S, 0xfffffff0 },
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -17,6 +17,7 @@
- #define PHY_ID_BCM5482			0x0143bcb0
- #define PHY_ID_BCM5411			0x00206070
- #define PHY_ID_BCM5421			0x002060e0
-+#define PHY_ID_BCM54210E		0x600d84a0
- #define PHY_ID_BCM5464			0x002060b0
- #define PHY_ID_BCM5461			0x002060c0
- #define PHY_ID_BCM54612E		0x03625e60
diff --git a/target/linux/generic/backport-4.9/076-v4.11-0007-net-phy-broadcom-rehook-BCM54612E-specific-init.patch b/target/linux/generic/backport-4.9/076-v4.11-0007-net-phy-broadcom-rehook-BCM54612E-specific-init.patch
deleted file mode 100644
index b7326c3df4..0000000000
--- a/target/linux/generic/backport-4.9/076-v4.11-0007-net-phy-broadcom-rehook-BCM54612E-specific-init.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 31 Jan 2017 22:54:54 +0100
-Subject: [PATCH] net: phy: broadcom: rehook BCM54612E specific init
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This extra BCM54612E code in PHY driver isn't really aneg specific. Even
-without it aneg works OK but the problem is no packets pass through PHY.
-
-Moreover putting this code inside config_aneg callback didn't allow
-resuming PHY correctly. When driver called phy_stop and phy_start it was
-putting PHY machine into RESUMING state. After that machine was
-switching into AN and NOLINK without ever calling phy_start_aneg. This
-prevented this extra setup from being called and PHY didn't work.
-
-This change has been verified to fix network on BCM47186B0 SoC device
-with BCM54612E.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -46,6 +46,34 @@ static int bcm54210e_config_init(struct
- 	return 0;
- }
- 
-+static int bcm54612e_config_init(struct phy_device *phydev)
-+{
-+	/* Clear TX internal delay unless requested. */
-+	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
-+	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
-+		/* Disable TXD to GTXCLK clock delay (default set) */
-+		/* Bit 9 is the only field in shadow register 00011 */
-+		bcm_phy_write_shadow(phydev, 0x03, 0);
-+	}
-+
-+	/* Clear RX internal delay unless requested. */
-+	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
-+	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
-+		u16 reg;
-+
-+		reg = bcm54xx_auxctl_read(phydev,
-+					  MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-+		/* Disable RXD to RXC delay (default set) */
-+		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
-+		/* Clear shadow selector field */
-+		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
-+		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
-+				     MII_BCM54XX_AUXCTL_MISC_WREN | reg);
-+	}
-+
-+	return 0;
-+}
-+
- static int bcm54810_config(struct phy_device *phydev)
- {
- 	int rc, val;
-@@ -250,6 +278,10 @@ static int bcm54xx_config_init(struct ph
- 		err = bcm54210e_config_init(phydev);
- 		if (err)
- 			return err;
-+	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
-+		err = bcm54612e_config_init(phydev);
-+		if (err)
-+			return err;
- 	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
- 		err = bcm54810_config(phydev);
- 		if (err)
-@@ -395,39 +427,6 @@ static int bcm5481_config_aneg(struct ph
- 	return ret;
- }
- 
--static int bcm54612e_config_aneg(struct phy_device *phydev)
--{
--	int ret;
--
--	/* First, auto-negotiate. */
--	ret = genphy_config_aneg(phydev);
--
--	/* Clear TX internal delay unless requested. */
--	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
--	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
--		/* Disable TXD to GTXCLK clock delay (default set) */
--		/* Bit 9 is the only field in shadow register 00011 */
--		bcm_phy_write_shadow(phydev, 0x03, 0);
--	}
--
--	/* Clear RX internal delay unless requested. */
--	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
--	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
--		u16 reg;
--
--		reg = bcm54xx_auxctl_read(phydev,
--					  MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
--		/* Disable RXD to RXC delay (default set) */
--		reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
--		/* Clear shadow selector field */
--		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
--		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
--				     MII_BCM54XX_AUXCTL_MISC_WREN | reg);
--	}
--
--	return ret;
--}
--
- static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
- {
- 	int val;
-@@ -594,7 +593,7 @@ static struct phy_driver broadcom_driver
- 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- 	.config_init	= bcm54xx_config_init,
--	.config_aneg	= bcm54612e_config_aneg,
-+	.config_aneg	= genphy_config_aneg,
- 	.read_status	= genphy_read_status,
- 	.ack_interrupt	= bcm_phy_ack_intr,
- 	.config_intr	= bcm_phy_config_intr,
diff --git a/target/linux/generic/backport-4.9/076-v4.15-0001-net-phy-broadcom-support-new-device-flag-for-setting.patch b/target/linux/generic/backport-4.9/076-v4.15-0001-net-phy-broadcom-support-new-device-flag-for-setting.patch
deleted file mode 100644
index 334c444692..0000000000
--- a/target/linux/generic/backport-4.9/076-v4.15-0001-net-phy-broadcom-support-new-device-flag-for-setting.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 2355a6546a053b1c16ebefd6ce1f0cccc00e1da5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Oct 2017 10:21:25 +0200
-Subject: [PATCH] net: phy: broadcom: support new device flag for setting
- master mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some of Broadcom's PHYs run by default in slave mode with Automatic
-Slave/Master configuration disabled. It stops them from working properly
-with some devices.
-
-So far it has been verified for BCM54210E and BCM50212E which don't
-work well with Intel's I217-LM and I218-LM:
-http://ark.intel.com/products/60019/Intel-Ethernet-Connection-I217-LM
-http://ark.intel.com/products/71307/Intel-Ethernet-Connection-I218-LM
-I was told there is massive ping loss.
-
-This commit adds support for a new flag which can be set by an ethernet
-driver to fixup PHY setup.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/broadcom.c | 6 ++++++
- include/linux/brcmphy.h    | 1 +
- 2 files changed, 7 insertions(+)
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -43,6 +43,12 @@ static int bcm54210e_config_init(struct
- 	val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
- 	bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
- 
-+	if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
-+		val = phy_read(phydev, MII_CTRL1000);
-+		val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
-+		phy_write(phydev, MII_CTRL1000, val);
-+	}
-+
- 	return 0;
- }
- 
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -59,6 +59,7 @@
- #define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00002000
- #define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
- #define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
-+#define PHY_BRCM_EN_MASTER_MODE		0x00010000
- 
- /* Broadcom BCM7xxx specific workarounds */
- #define PHY_BRCM_7XXX_REV(x)		(((x) >> 8) & 0xff)
diff --git a/target/linux/generic/backport-4.9/080-0001-leds-core-add-OF-variants-of-LED-registering-functio.patch b/target/linux/generic/backport-4.9/080-0001-leds-core-add-OF-variants-of-LED-registering-functio.patch
deleted file mode 100644
index 5b1b307aec..0000000000
--- a/target/linux/generic/backport-4.9/080-0001-leds-core-add-OF-variants-of-LED-registering-functio.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 6 Mar 2017 06:19:44 +0100
-Subject: [PATCH] leds: core: add OF variants of LED registering functions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-These new functions allow passing an additional device_node argument
-that will be internally set for created LED device. Thanks to this LED
-core code and triggers will be able to access DT node for reading extra
-info.
-
-The easiest solution for achieving this was reworking old functions to
-more generic ones & adding simple defines for API compatibility.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
----
- drivers/leds/led-class.c | 26 ++++++++++++++++----------
- include/linux/leds.h     | 14 ++++++++++----
- 2 files changed, 26 insertions(+), 14 deletions(-)
-
---- a/drivers/leds/led-class.c
-+++ b/drivers/leds/led-class.c
-@@ -181,11 +181,14 @@ static int led_classdev_next_name(const
- }
- 
- /**
-- * led_classdev_register - register a new object of led_classdev class.
-- * @parent: The device to register.
-+ * of_led_classdev_register - register a new object of led_classdev class.
-+ *
-+ * @parent: parent of LED device
-  * @led_cdev: the led_classdev structure for this device.
-+ * @np: DT node describing this LED
-  */
--int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
-+int of_led_classdev_register(struct device *parent, struct device_node *np,
-+			    struct led_classdev *led_cdev)
- {
- 	char name[64];
- 	int ret;
-@@ -198,6 +201,7 @@ int led_classdev_register(struct device
- 				led_cdev, led_cdev->groups, "%s", name);
- 	if (IS_ERR(led_cdev->dev))
- 		return PTR_ERR(led_cdev->dev);
-+	led_cdev->dev->of_node = np;
- 
- 	if (ret)
- 		dev_warn(parent, "Led %s renamed to %s due to name collision",
-@@ -228,7 +232,7 @@ int led_classdev_register(struct device
- 
- 	return 0;
- }
--EXPORT_SYMBOL_GPL(led_classdev_register);
-+EXPORT_SYMBOL_GPL(of_led_classdev_register);
- 
- /**
-  * led_classdev_unregister - unregisters a object of led_properties class.
-@@ -270,12 +274,14 @@ static void devm_led_classdev_release(st
- }
- 
- /**
-- * devm_led_classdev_register - resource managed led_classdev_register()
-- * @parent: The device to register.
-+ * devm_of_led_classdev_register - resource managed led_classdev_register()
-+ *
-+ * @parent: parent of LED device
-  * @led_cdev: the led_classdev structure for this device.
-  */
--int devm_led_classdev_register(struct device *parent,
--			       struct led_classdev *led_cdev)
-+int devm_of_led_classdev_register(struct device *parent,
-+				  struct device_node *np,
-+				  struct led_classdev *led_cdev)
- {
- 	struct led_classdev **dr;
- 	int rc;
-@@ -284,7 +290,7 @@ int devm_led_classdev_register(struct de
- 	if (!dr)
- 		return -ENOMEM;
- 
--	rc = led_classdev_register(parent, led_cdev);
-+	rc = of_led_classdev_register(parent, np, led_cdev);
- 	if (rc) {
- 		devres_free(dr);
- 		return rc;
-@@ -295,7 +301,7 @@ int devm_led_classdev_register(struct de
- 
- 	return 0;
- }
--EXPORT_SYMBOL_GPL(devm_led_classdev_register);
-+EXPORT_SYMBOL_GPL(devm_of_led_classdev_register);
- 
- static int devm_led_classdev_match(struct device *dev, void *res, void *data)
- {
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -109,10 +109,16 @@ struct led_classdev {
- 	struct mutex		led_access;
- };
- 
--extern int led_classdev_register(struct device *parent,
--				 struct led_classdev *led_cdev);
--extern int devm_led_classdev_register(struct device *parent,
--				      struct led_classdev *led_cdev);
-+extern int of_led_classdev_register(struct device *parent,
-+				    struct device_node *np,
-+				    struct led_classdev *led_cdev);
-+#define led_classdev_register(parent, led_cdev)				\
-+	of_led_classdev_register(parent, NULL, led_cdev)
-+extern int devm_of_led_classdev_register(struct device *parent,
-+					 struct device_node *np,
-+					 struct led_classdev *led_cdev);
-+#define devm_led_classdev_register(parent, led_cdev)			\
-+	devm_of_led_classdev_register(parent, NULL, led_cdev)
- extern void led_classdev_unregister(struct led_classdev *led_cdev);
- extern void devm_led_classdev_unregister(struct device *parent,
- 					 struct led_classdev *led_cdev);
diff --git a/target/linux/generic/backport-4.9/080-0002-leds-gpio-use-OF-variant-of-LED-registering-function.patch b/target/linux/generic/backport-4.9/080-0002-leds-gpio-use-OF-variant-of-LED-registering-function.patch
deleted file mode 100644
index 0247fffb2a..0000000000
--- a/target/linux/generic/backport-4.9/080-0002-leds-gpio-use-OF-variant-of-LED-registering-function.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 6 Mar 2017 06:19:45 +0100
-Subject: [PATCH] leds: gpio: use OF variant of LED registering function
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In leds-gpio we support LEDs specified in DT so we should use
-(devm_)of_led_classdev_register. This allows passing DT node as argument
-for use by the LED subsystem.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
----
- drivers/leds/leds-gpio.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -77,7 +77,7 @@ static int gpio_blink_set(struct led_cla
- 
- static int create_gpio_led(const struct gpio_led *template,
- 	struct gpio_led_data *led_dat, struct device *parent,
--	gpio_blink_set_t blink_set)
-+	struct device_node *np, gpio_blink_set_t blink_set)
- {
- 	int ret, state;
- 
-@@ -139,7 +139,7 @@ static int create_gpio_led(const struct
- 	if (ret < 0)
- 		return ret;
- 
--	return devm_led_classdev_register(parent, &led_dat->cdev);
-+	return devm_of_led_classdev_register(parent, np, &led_dat->cdev);
- }
- 
- struct gpio_leds_priv {
-@@ -206,7 +206,7 @@ static struct gpio_leds_priv *gpio_leds_
- 		if (fwnode_property_present(child, "panic-indicator"))
- 			led.panic_indicator = 1;
- 
--		ret = create_gpio_led(&led, led_dat, dev, NULL);
-+		ret = create_gpio_led(&led, led_dat, dev, np, NULL);
- 		if (ret < 0) {
- 			fwnode_handle_put(child);
- 			return ERR_PTR(ret);
-@@ -240,9 +240,9 @@ static int gpio_led_probe(struct platfor
- 
- 		priv->num_leds = pdata->num_leds;
- 		for (i = 0; i < priv->num_leds; i++) {
--			ret = create_gpio_led(&pdata->leds[i],
--					      &priv->leds[i],
--					      &pdev->dev, pdata->gpio_blink_set);
-+			ret = create_gpio_led(&pdata->leds[i], &priv->leds[i],
-+					      &pdev->dev, NULL,
-+					      pdata->gpio_blink_set);
- 			if (ret < 0)
- 				return ret;
- 		}
diff --git a/target/linux/generic/backport-4.9/081-0001-thermal-bcm2835-add-thermal-driver-for-bcm2835-SoC.patch b/target/linux/generic/backport-4.9/081-0001-thermal-bcm2835-add-thermal-driver-for-bcm2835-SoC.patch
deleted file mode 100644
index d1ef21ed0a..0000000000
--- a/target/linux/generic/backport-4.9/081-0001-thermal-bcm2835-add-thermal-driver-for-bcm2835-SoC.patch
+++ /dev/null
@@ -1,365 +0,0 @@
-From bcb7dd9ef206f7d646ed8dac6fe7772083714253 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Fri, 31 Mar 2017 20:03:06 +0000
-Subject: [PATCH] thermal: bcm2835: add thermal driver for bcm2835 SoC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add basic thermal driver for bcm2835 SoC.
-
-This driver currently make sure that tsense HW block is set up
-correctly.
-
-Tested-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Acked-by: Eric Anholt <eric@anholt.net>
-Acked-by: Eduardo Valentin <edubezval@gmail.com>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
----
- drivers/thermal/Kconfig           |   8 +
- drivers/thermal/Makefile          |   1 +
- drivers/thermal/bcm2835_thermal.c | 314 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 323 insertions(+)
- create mode 100644 drivers/thermal/bcm2835_thermal.c
-
---- a/drivers/thermal/Kconfig
-+++ b/drivers/thermal/Kconfig
-@@ -434,4 +434,12 @@ depends on (ARCH_QCOM && OF) || COMPILE_
- source "drivers/thermal/qcom/Kconfig"
- endmenu
- 
-+config BCM2835_THERMAL
-+	tristate "Thermal sensors on bcm2835 SoC"
-+	depends on ARCH_BCM2835 || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	depends on THERMAL_OF
-+	help
-+	  Support for thermal sensors on Broadcom bcm2835 SoCs.
-+
- endif
---- a/drivers/thermal/Makefile
-+++ b/drivers/thermal/Makefile
-@@ -55,3 +55,4 @@ obj-$(CONFIG_TEGRA_SOCTHERM)	+= tegra/
- obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
- obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
- obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
-+obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o
---- /dev/null
-+++ b/drivers/thermal/bcm2835_thermal.c
-@@ -0,0 +1,314 @@
-+/*
-+ * Driver for Broadcom BCM2835 SoC temperature sensor
-+ *
-+ * Copyright (C) 2016 Martin Sperl
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/debugfs.h>
-+#include <linux/device.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/thermal.h>
-+
-+#define BCM2835_TS_TSENSCTL			0x00
-+#define BCM2835_TS_TSENSSTAT			0x04
-+
-+#define BCM2835_TS_TSENSCTL_PRWDW		BIT(0)
-+#define BCM2835_TS_TSENSCTL_RSTB		BIT(1)
-+
-+/*
-+ * bandgap reference voltage in 6 mV increments
-+ * 000b = 1178 mV, 001b = 1184 mV, ... 111b = 1220 mV
-+ */
-+#define BCM2835_TS_TSENSCTL_CTRL_BITS		3
-+#define BCM2835_TS_TSENSCTL_CTRL_SHIFT		2
-+#define BCM2835_TS_TSENSCTL_CTRL_MASK		    \
-+	GENMASK(BCM2835_TS_TSENSCTL_CTRL_BITS +     \
-+		BCM2835_TS_TSENSCTL_CTRL_SHIFT - 1, \
-+		BCM2835_TS_TSENSCTL_CTRL_SHIFT)
-+#define BCM2835_TS_TSENSCTL_CTRL_DEFAULT	1
-+#define BCM2835_TS_TSENSCTL_EN_INT		BIT(5)
-+#define BCM2835_TS_TSENSCTL_DIRECT		BIT(6)
-+#define BCM2835_TS_TSENSCTL_CLR_INT		BIT(7)
-+#define BCM2835_TS_TSENSCTL_THOLD_SHIFT		8
-+#define BCM2835_TS_TSENSCTL_THOLD_BITS		10
-+#define BCM2835_TS_TSENSCTL_THOLD_MASK		     \
-+	GENMASK(BCM2835_TS_TSENSCTL_THOLD_BITS +     \
-+		BCM2835_TS_TSENSCTL_THOLD_SHIFT - 1, \
-+		BCM2835_TS_TSENSCTL_THOLD_SHIFT)
-+/*
-+ * time how long the block to be asserted in reset
-+ * which based on a clock counter (TSENS clock assumed)
-+ */
-+#define BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT	18
-+#define BCM2835_TS_TSENSCTL_RSTDELAY_BITS	8
-+#define BCM2835_TS_TSENSCTL_REGULEN		BIT(26)
-+
-+#define BCM2835_TS_TSENSSTAT_DATA_BITS		10
-+#define BCM2835_TS_TSENSSTAT_DATA_SHIFT		0
-+#define BCM2835_TS_TSENSSTAT_DATA_MASK		     \
-+	GENMASK(BCM2835_TS_TSENSSTAT_DATA_BITS +     \
-+		BCM2835_TS_TSENSSTAT_DATA_SHIFT - 1, \
-+		BCM2835_TS_TSENSSTAT_DATA_SHIFT)
-+#define BCM2835_TS_TSENSSTAT_VALID		BIT(10)
-+#define BCM2835_TS_TSENSSTAT_INTERRUPT		BIT(11)
-+
-+struct bcm2835_thermal_data {
-+	struct thermal_zone_device *tz;
-+	void __iomem *regs;
-+	struct clk *clk;
-+	struct dentry *debugfsdir;
-+};
-+
-+static int bcm2835_thermal_adc2temp(u32 adc, int offset, int slope)
-+{
-+	return offset + slope * adc;
-+}
-+
-+static int bcm2835_thermal_temp2adc(int temp, int offset, int slope)
-+{
-+	temp -= offset;
-+	temp /= slope;
-+
-+	if (temp < 0)
-+		temp = 0;
-+	if (temp >= BIT(BCM2835_TS_TSENSSTAT_DATA_BITS))
-+		temp = BIT(BCM2835_TS_TSENSSTAT_DATA_BITS) - 1;
-+
-+	return temp;
-+}
-+
-+static int bcm2835_thermal_get_temp(void *d, int *temp)
-+{
-+	struct bcm2835_thermal_data *data = d;
-+	u32 val = readl(data->regs + BCM2835_TS_TSENSSTAT);
-+
-+	if (!(val & BCM2835_TS_TSENSSTAT_VALID))
-+		return -EIO;
-+
-+	val &= BCM2835_TS_TSENSSTAT_DATA_MASK;
-+
-+	*temp = bcm2835_thermal_adc2temp(
-+		val,
-+		thermal_zone_get_offset(data->tz),
-+		thermal_zone_get_slope(data->tz));
-+
-+	return 0;
-+}
-+
-+static const struct debugfs_reg32 bcm2835_thermal_regs[] = {
-+	{
-+		.name = "ctl",
-+		.offset = 0
-+	},
-+	{
-+		.name = "stat",
-+		.offset = 4
-+	}
-+};
-+
-+static void bcm2835_thermal_debugfs(struct platform_device *pdev)
-+{
-+	struct thermal_zone_device *tz = platform_get_drvdata(pdev);
-+	struct bcm2835_thermal_data *data = tz->devdata;
-+	struct debugfs_regset32 *regset;
-+
-+	data->debugfsdir = debugfs_create_dir("bcm2835_thermal", NULL);
-+	if (!data->debugfsdir)
-+		return;
-+
-+	regset = devm_kzalloc(&pdev->dev, sizeof(*regset), GFP_KERNEL);
-+	if (!regset)
-+		return;
-+
-+	regset->regs = bcm2835_thermal_regs;
-+	regset->nregs = ARRAY_SIZE(bcm2835_thermal_regs);
-+	regset->base = data->regs;
-+
-+	debugfs_create_regset32("regset", 0444, data->debugfsdir, regset);
-+}
-+
-+static struct thermal_zone_of_device_ops bcm2835_thermal_ops = {
-+	.get_temp = bcm2835_thermal_get_temp,
-+};
-+
-+/*
-+ * Note: as per Raspberry Foundation FAQ
-+ * (https://www.raspberrypi.org/help/faqs/#performanceOperatingTemperature)
-+ * the recommended temperature range for the SoC -40C to +85C
-+ * so the trip limit is set to 80C.
-+ * this applies to all the BCM283X SoC
-+ */
-+
-+static const struct of_device_id bcm2835_thermal_of_match_table[] = {
-+	{
-+		.compatible = "brcm,bcm2835-thermal",
-+	},
-+	{
-+		.compatible = "brcm,bcm2836-thermal",
-+	},
-+	{
-+		.compatible = "brcm,bcm2837-thermal",
-+	},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table);
-+
-+static int bcm2835_thermal_probe(struct platform_device *pdev)
-+{
-+	const struct of_device_id *match;
-+	struct thermal_zone_device *tz;
-+	struct bcm2835_thermal_data *data;
-+	struct resource *res;
-+	int err = 0;
-+	u32 val;
-+	unsigned long rate;
-+
-+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
-+	match = of_match_device(bcm2835_thermal_of_match_table,
-+				&pdev->dev);
-+	if (!match)
-+		return -EINVAL;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	data->regs = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(data->regs)) {
-+		err = PTR_ERR(data->regs);
-+		dev_err(&pdev->dev, "Could not get registers: %d\n", err);
-+		return err;
-+	}
-+
-+	data->clk = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(data->clk)) {
-+		err = PTR_ERR(data->clk);
-+		if (err != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "Could not get clk: %d\n", err);
-+		return err;
-+	}
-+
-+	err = clk_prepare_enable(data->clk);
-+	if (err)
-+		return err;
-+
-+	rate = clk_get_rate(data->clk);
-+	if ((rate < 1920000) || (rate > 5000000))
-+		dev_warn(&pdev->dev,
-+			 "Clock %pCn running at %pCr Hz is outside of the recommended range: 1.92 to 5MHz\n",
-+			 data->clk, data->clk);
-+
-+	/* register of thermal sensor and get info from DT */
-+	tz = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
-+					     &bcm2835_thermal_ops);
-+	if (IS_ERR(tz)) {
-+		err = PTR_ERR(tz);
-+		dev_err(&pdev->dev,
-+			"Failed to register the thermal device: %d\n",
-+			err);
-+		goto err_clk;
-+	}
-+
-+	/*
-+	 * right now the FW does set up the HW-block, so we are not
-+	 * touching the configuration registers.
-+	 * But if the HW is not enabled, then set it up
-+	 * using "sane" values used by the firmware right now.
-+	 */
-+	val = readl(data->regs + BCM2835_TS_TSENSCTL);
-+	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
-+		int trip_temp, offset, slope;
-+
-+		slope = thermal_zone_get_slope(tz);
-+		offset = thermal_zone_get_offset(tz);
-+		/*
-+		 * For now we deal only with critical, otherwise
-+		 * would need to iterate
-+		 */
-+		err = tz->ops->get_trip_temp(tz, 0, &trip_temp);
-+		if (err < 0) {
-+			err = PTR_ERR(tz);
-+			dev_err(&pdev->dev,
-+				"Not able to read trip_temp: %d\n",
-+				err);
-+			goto err_tz;
-+		}
-+
-+		/* set bandgap reference voltage and enable voltage regulator */
-+		val = (BCM2835_TS_TSENSCTL_CTRL_DEFAULT <<
-+		       BCM2835_TS_TSENSCTL_CTRL_SHIFT) |
-+		      BCM2835_TS_TSENSCTL_REGULEN;
-+
-+		/* use the recommended reset duration */
-+		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);
-+
-+		/*  trip_adc value from info */
-+		val |= bcm2835_thermal_temp2adc(trip_temp,
-+						offset,
-+						slope)
-+			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;
-+
-+		/* write the value back to the register as 2 steps */
-+		writel(val, data->regs + BCM2835_TS_TSENSCTL);
-+		val |= BCM2835_TS_TSENSCTL_RSTB;
-+		writel(val, data->regs + BCM2835_TS_TSENSCTL);
-+	}
-+
-+	data->tz = tz;
-+
-+	platform_set_drvdata(pdev, tz);
-+
-+	bcm2835_thermal_debugfs(pdev);
-+
-+	return 0;
-+err_tz:
-+	thermal_zone_of_sensor_unregister(&pdev->dev, tz);
-+err_clk:
-+	clk_disable_unprepare(data->clk);
-+
-+	return err;
-+}
-+
-+static int bcm2835_thermal_remove(struct platform_device *pdev)
-+{
-+	struct thermal_zone_device *tz = platform_get_drvdata(pdev);
-+	struct bcm2835_thermal_data *data = tz->devdata;
-+
-+	debugfs_remove_recursive(data->debugfsdir);
-+	thermal_zone_of_sensor_unregister(&pdev->dev, tz);
-+	clk_disable_unprepare(data->clk);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver bcm2835_thermal_driver = {
-+	.probe = bcm2835_thermal_probe,
-+	.remove = bcm2835_thermal_remove,
-+	.driver = {
-+		.name = "bcm2835_thermal",
-+		.of_match_table = bcm2835_thermal_of_match_table,
-+	},
-+};
-+module_platform_driver(bcm2835_thermal_driver);
-+
-+MODULE_AUTHOR("Martin Sperl");
-+MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-4.9/081-0002-thermal-broadcom-add-Northstar-thermal-driver.patch b/target/linux/generic/backport-4.9/081-0002-thermal-broadcom-add-Northstar-thermal-driver.patch
deleted file mode 100644
index 8ba8cb57eb..0000000000
--- a/target/linux/generic/backport-4.9/081-0002-thermal-broadcom-add-Northstar-thermal-driver.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From a94cb7eeecc4104a6874339f90c5d0647359c102 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 3 Apr 2017 17:48:29 +0200
-Subject: [PATCH] thermal: broadcom: add Northstar thermal driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar is a SoC family commonly used in home routers. This commit
-adds a driver for checking CPU temperature. As Northstar Plus seems to
-also have this IP block this new symbol gets ARCH_BCM_IPROC dependency.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
----
- drivers/thermal/Kconfig               |   5 ++
- drivers/thermal/Makefile              |   1 +
- drivers/thermal/broadcom/Kconfig      |   8 +++
- drivers/thermal/broadcom/Makefile     |   1 +
- drivers/thermal/broadcom/ns-thermal.c | 105 ++++++++++++++++++++++++++++++++++
- 5 files changed, 120 insertions(+)
- create mode 100644 drivers/thermal/broadcom/Kconfig
- create mode 100644 drivers/thermal/broadcom/Makefile
- create mode 100644 drivers/thermal/broadcom/ns-thermal.c
-
---- a/drivers/thermal/Kconfig
-+++ b/drivers/thermal/Kconfig
-@@ -381,6 +381,11 @@ config MTK_THERMAL
- 	  Enable this option if you want to have support for thermal management
- 	  controller present in Mediatek SoCs
- 
-+menu "Broadcom thermal drivers"
-+depends on ARCH_BCM || COMPILE_TEST
-+source "drivers/thermal/broadcom/Kconfig"
-+endmenu
-+
- menu "Texas Instruments thermal drivers"
- depends on ARCH_HAS_BANDGAP || COMPILE_TEST
- depends on HAS_IOMEM
---- a/drivers/thermal/Makefile
-+++ b/drivers/thermal/Makefile
-@@ -26,6 +26,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= c
- thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
- 
- # platform thermal drivers
-+obj-y				+= broadcom/
- obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
- obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
- obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
---- /dev/null
-+++ b/drivers/thermal/broadcom/Kconfig
-@@ -0,0 +1,8 @@
-+config BCM_NS_THERMAL
-+	tristate "Northstar thermal driver"
-+	depends on ARCH_BCM_IPROC || COMPILE_TEST
-+	help
-+	  Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081,
-+	  BCM4709 and BCM47094. It contains DMU (Device Management Unit) block
-+	  with a thermal sensor that allows checking CPU temperature. This
-+	  driver provides support for it.
---- /dev/null
-+++ b/drivers/thermal/broadcom/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_BCM_NS_THERMAL)		+= ns-thermal.o
---- /dev/null
-+++ b/drivers/thermal/broadcom/ns-thermal.c
-@@ -0,0 +1,105 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/of_address.h>
-+#include <linux/platform_device.h>
-+#include <linux/thermal.h>
-+
-+#define PVTMON_CONTROL0					0x00
-+#define PVTMON_CONTROL0_SEL_MASK			0x0000000e
-+#define PVTMON_CONTROL0_SEL_TEMP_MONITOR		0x00000000
-+#define PVTMON_CONTROL0_SEL_TEST_MODE			0x0000000e
-+#define PVTMON_STATUS					0x08
-+
-+struct ns_thermal {
-+	struct thermal_zone_device *tz;
-+	void __iomem *pvtmon;
-+};
-+
-+static int ns_thermal_get_temp(void *data, int *temp)
-+{
-+	struct ns_thermal *ns_thermal = data;
-+	int offset = thermal_zone_get_offset(ns_thermal->tz);
-+	int slope = thermal_zone_get_slope(ns_thermal->tz);
-+	u32 val;
-+
-+	val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0);
-+	if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) {
-+		/* Clear current mode selection */
-+		val &= ~PVTMON_CONTROL0_SEL_MASK;
-+
-+		/* Set temp monitor mode (it's the default actually) */
-+		val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR;
-+
-+		writel(val, ns_thermal->pvtmon + PVTMON_CONTROL0);
-+	}
-+
-+	val = readl(ns_thermal->pvtmon + PVTMON_STATUS);
-+	*temp = slope * val + offset;
-+
-+	return 0;
-+}
-+
-+static const struct thermal_zone_of_device_ops ns_thermal_ops = {
-+	.get_temp = ns_thermal_get_temp,
-+};
-+
-+static int ns_thermal_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct ns_thermal *ns_thermal;
-+
-+	ns_thermal = devm_kzalloc(dev, sizeof(*ns_thermal), GFP_KERNEL);
-+	if (!ns_thermal)
-+		return -ENOMEM;
-+
-+	ns_thermal->pvtmon = of_iomap(dev_of_node(dev), 0);
-+	if (WARN_ON(!ns_thermal->pvtmon))
-+		return -ENOENT;
-+
-+	ns_thermal->tz = devm_thermal_zone_of_sensor_register(dev, 0,
-+							      ns_thermal,
-+							      &ns_thermal_ops);
-+	if (IS_ERR(ns_thermal->tz)) {
-+		iounmap(ns_thermal->pvtmon);
-+		return PTR_ERR(ns_thermal->tz);
-+	}
-+
-+	platform_set_drvdata(pdev, ns_thermal);
-+
-+	return 0;
-+}
-+
-+static int ns_thermal_remove(struct platform_device *pdev)
-+{
-+	struct ns_thermal *ns_thermal = platform_get_drvdata(pdev);
-+
-+	iounmap(ns_thermal->pvtmon);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id ns_thermal_of_match[] = {
-+	{ .compatible = "brcm,ns-thermal", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ns_thermal_of_match);
-+
-+static struct platform_driver ns_thermal_driver = {
-+	.probe		= ns_thermal_probe,
-+	.remove		= ns_thermal_remove,
-+	.driver = {
-+		.name = "ns-thermal",
-+		.of_match_table = ns_thermal_of_match,
-+	},
-+};
-+module_platform_driver(ns_thermal_driver);
-+
-+MODULE_DESCRIPTION("Northstar thermal driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-4.9/082-0001-usb-core-read-USB-ports-from-DT-in-the-usbport-LED-t.patch b/target/linux/generic/backport-4.9/082-0001-usb-core-read-USB-ports-from-DT-in-the-usbport-LED-t.patch
deleted file mode 100644
index 65d17c8a9e..0000000000
--- a/target/linux/generic/backport-4.9/082-0001-usb-core-read-USB-ports-from-DT-in-the-usbport-LED-t.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 4f04c210d031667e503d6538a72345a36f3b5d71 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 8 Jun 2017 18:08:32 +0200
-Subject: [PATCH] usb: core: read USB ports from DT in the usbport LED trigger
- driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This uses DT info to read relation description of LEDs and USB ports. If
-DT has properly described LEDs, trigger will know when to turn them on.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/core/ledtrig-usbport.c | 56 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 56 insertions(+)
-
---- a/drivers/usb/core/ledtrig-usbport.c
-+++ b/drivers/usb/core/ledtrig-usbport.c
-@@ -11,8 +11,10 @@
- #include <linux/device.h>
- #include <linux/leds.h>
- #include <linux/module.h>
-+#include <linux/of.h>
- #include <linux/slab.h>
- #include <linux/usb.h>
-+#include <linux/usb/of.h>
- 
- struct usbport_trig_data {
- 	struct led_classdev *led_cdev;
-@@ -123,6 +125,57 @@ static const struct attribute_group port
-  * Adding & removing ports
-  ***************************************/
- 
-+/**
-+ * usbport_trig_port_observed - Check if port should be observed
-+ */
-+static bool usbport_trig_port_observed(struct usbport_trig_data *usbport_data,
-+				       struct usb_device *usb_dev, int port1)
-+{
-+	struct device *dev = usbport_data->led_cdev->dev;
-+	struct device_node *led_np = dev->of_node;
-+	struct of_phandle_args args;
-+	struct device_node *port_np;
-+	int count, i;
-+
-+	if (!led_np)
-+		return false;
-+
-+	/* Get node of port being added */
-+	port_np = usb_of_get_child_node(usb_dev->dev.of_node, port1);
-+	if (!port_np)
-+		return false;
-+
-+	/* Amount of trigger sources for this LED */
-+	count = of_count_phandle_with_args(led_np, "trigger-sources",
-+					   "#trigger-source-cells");
-+	if (count < 0) {
-+		dev_warn(dev, "Failed to get trigger sources for %s\n",
-+			 led_np->full_name);
-+		return false;
-+	}
-+
-+	/* Check list of sources for this specific port */
-+	for (i = 0; i < count; i++) {
-+		int err;
-+
-+		err = of_parse_phandle_with_args(led_np, "trigger-sources",
-+						 "#trigger-source-cells", i,
-+						 &args);
-+		if (err) {
-+			dev_err(dev, "Failed to get trigger source phandle at index %d: %d\n",
-+				i, err);
-+			continue;
-+		}
-+
-+		of_node_put(args.np);
-+
-+		if (args.np == port_np)
-+			return true;
-+	}
-+
-+	return false;
-+}
-+
- static int usbport_trig_add_port(struct usbport_trig_data *usbport_data,
- 				 struct usb_device *usb_dev,
- 				 const char *hub_name, int portnum)
-@@ -141,6 +194,8 @@ static int usbport_trig_add_port(struct
- 	port->data = usbport_data;
- 	port->hub = usb_dev;
- 	port->portnum = portnum;
-+	port->observed = usbport_trig_port_observed(usbport_data, usb_dev,
-+						    portnum);
- 
- 	len = strlen(hub_name) + 8;
- 	port->port_name = kzalloc(len, GFP_KERNEL);
-@@ -255,6 +310,7 @@ static void usbport_trig_activate(struct
- 	if (err)
- 		goto err_free;
- 	usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports);
-+	usbport_trig_update_count(usbport_data);
- 
- 	/* Notifications */
- 	usbport_data->nb.notifier_call = usbport_trig_notify,
diff --git a/target/linux/generic/backport-4.9/085-v4.16-0001-i2c-gpio-Enable-working-over-slow-can_sleep-GPIOs.patch b/target/linux/generic/backport-4.9/085-v4.16-0001-i2c-gpio-Enable-working-over-slow-can_sleep-GPIOs.patch
deleted file mode 100644
index ead6675e0b..0000000000
--- a/target/linux/generic/backport-4.9/085-v4.16-0001-i2c-gpio-Enable-working-over-slow-can_sleep-GPIOs.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From f11a04464ae57e8db1bb7634547842b43e36a898 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
-Date: Fri, 22 Dec 2017 22:47:16 +0100
-Subject: i2c: gpio: Enable working over slow can_sleep GPIOs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-"Slow" GPIOs (usually those connected over an SPI or an I2C bus) are,
-well, slow in their operation. It is generally a good idea to avoid
-using them for time-critical operation, but sometimes the hardware just
-sucks, and the software has to cope. In addition to that, the I2C bus
-itself does not actually define any strict timing limits; the bus is
-free to go all the way down to DC. The timeouts (and therefore the
-slowest acceptable frequency) are present only in SMBus.
-
-The `can_sleep` is IMHO a wrong concept to use here. My SPI-to-quad-UART
-chip (MAX14830) is connected via a 26MHz SPI bus, and it happily drives
-SCL at 200kHz (5µs pulses) during my benchmarks. That's faster than the
-maximal allowed speed of the traditional I2C.
-
-The previous version of this code did not really block operation over
-slow GPIO pins, anyway. Instead, it just resorted to printing a warning
-with a backtrace each time a GPIO pin was accessed, thereby slowing
-things down even more.
-
-Finally, it's not just me. A similar patch was originally submitted in
-2015 [1].
-
-[1] https://patchwork.ozlabs.org/patch/450956/
-
-Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
-Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
----
- drivers/i2c/busses/i2c-gpio.c | 11 +++++++----
- 1 file changed, 7 insertions(+), 4 deletions(-)
-
---- a/drivers/i2c/busses/i2c-gpio.c
-+++ b/drivers/i2c/busses/i2c-gpio.c
-@@ -44,7 +44,7 @@ static void i2c_gpio_setsda_val(void *da
- {
- 	struct i2c_gpio_platform_data *pdata = data;
- 
--	gpio_set_value(pdata->sda_pin, state);
-+	gpio_set_value_cansleep(pdata->sda_pin, state);
- }
- 
- /* Toggle SCL by changing the direction of the pin. */
-@@ -68,21 +68,21 @@ static void i2c_gpio_setscl_val(void *da
- {
- 	struct i2c_gpio_platform_data *pdata = data;
- 
--	gpio_set_value(pdata->scl_pin, state);
-+	gpio_set_value_cansleep(pdata->scl_pin, state);
- }
- 
- static int i2c_gpio_getsda(void *data)
- {
- 	struct i2c_gpio_platform_data *pdata = data;
- 
--	return gpio_get_value(pdata->sda_pin);
-+	return gpio_get_value_cansleep(pdata->sda_pin);
- }
- 
- static int i2c_gpio_getscl(void *data)
- {
- 	struct i2c_gpio_platform_data *pdata = data;
- 
--	return gpio_get_value(pdata->scl_pin);
-+	return gpio_get_value_cansleep(pdata->scl_pin);
- }
- 
- static int of_i2c_gpio_get_pins(struct device_node *np,
-@@ -175,6 +175,9 @@ static int i2c_gpio_probe(struct platfor
- 		memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata));
- 	}
- 
-+	if (gpiod_cansleep(gpio_to_desc(pdata->sda_pin)) || gpiod_cansleep(gpio_to_desc(pdata->scl_pin)))
-+		dev_warn(&pdev->dev, "Slow GPIO pins might wreak havoc into I2C/SMBus bus timing");
-+
- 	if (pdata->sda_is_open_drain) {
- 		gpio_direction_output(pdata->sda_pin, 1);
- 		bit_data->setsda = i2c_gpio_setsda_val;
diff --git a/target/linux/generic/backport-4.9/087-regmap-make-LZO-cache-optional.patch b/target/linux/generic/backport-4.9/087-regmap-make-LZO-cache-optional.patch
deleted file mode 100644
index c26994ee35..0000000000
--- a/target/linux/generic/backport-4.9/087-regmap-make-LZO-cache-optional.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From de88e9b0354c2e3ff8eae3f97afe43a34f5ed239 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 13 May 2017 13:03:21 +0200
-Subject: [PATCH] regmap: make LZO cache optional
-
-Commit 2cbbb579bcbe3 ("regmap: Add the LZO cache support") added support
-for LZO compression in regcache, but there were never any users added
-afterwards. Since LZO support itself has its own size, it currently is
-rather a deoptimization.
-
-So make it optional by introducing a symbol that can be selected by
-drivers wanting to make use of it.
-
-Saves e.g. ~46 kB on MIPS (size of LZO support + regcache LZO code).
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-I tried using google to find any users (even out-of-tree ones), but at
-best I found a single driver submission that was switched to RBTREE in
-subsequent resubmissions (MFD_SMSC).
-
-One could maybe also just drop the code because of no users for 5 years,
-but that would be up to the maintainer(s) to decide.
-
- drivers/base/regmap/Kconfig    | 5 ++++-
- drivers/base/regmap/Makefile   | 3 ++-
- drivers/base/regmap/regcache.c | 2 ++
- 3 files changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -4,9 +4,12 @@
- 
- config REGMAP
- 	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
-+	select IRQ_DOMAIN if REGMAP_IRQ
-+	bool
-+
-+config REGCACHE_COMPRESSED
- 	select LZO_COMPRESS
- 	select LZO_DECOMPRESS
--	select IRQ_DOMAIN if REGMAP_IRQ
- 	bool
- 
- config REGMAP_AC97
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -2,7 +2,8 @@
- CFLAGS_regmap.o := -I$(src)
- 
- obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o
-+obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
-+obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
- obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
- obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
---- a/drivers/base/regmap/regcache.c
-+++ b/drivers/base/regmap/regcache.c
-@@ -21,7 +21,9 @@
- 
- static const struct regcache_ops *cache_types[] = {
- 	&regcache_rbtree_ops,
-+#if IS_ENABLED(CONFIG_REGCACHE_COMPRESSED)
- 	&regcache_lzo_ops,
-+#endif
- 	&regcache_flat_ops,
- };
- 
diff --git a/target/linux/generic/backport-4.9/090-net-generalize-napi_complete_done.patch b/target/linux/generic/backport-4.9/090-net-generalize-napi_complete_done.patch
deleted file mode 100644
index f2f1f6f81e..0000000000
--- a/target/linux/generic/backport-4.9/090-net-generalize-napi_complete_done.patch
+++ /dev/null
@@ -1,1412 +0,0 @@
-From 6ad20165d376fa07919a70e4f43dfae564601829 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Mon, 30 Jan 2017 08:22:01 -0800
-Subject: drivers: net: generalize napi_complete_done()
-
-napi_complete_done() allows to opt-in for gro_flush_timeout,
-added back in linux-3.19, commit 3b47d30396ba
-("net: gro: add a per device gro flush timer")
-
-This allows for more efficient GRO aggregation without
-sacrifying latencies.
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/can/at91_can.c                          |  2 +-
- drivers/net/can/c_can/c_can.c                       |  2 +-
- drivers/net/can/flexcan.c                           |  2 +-
- drivers/net/can/ifi_canfd/ifi_canfd.c               |  2 +-
- drivers/net/can/janz-ican3.c                        |  2 +-
- drivers/net/can/m_can/m_can.c                       |  2 +-
- drivers/net/can/rcar/rcar_can.c                     |  2 +-
- drivers/net/can/rcar/rcar_canfd.c                   |  2 +-
- drivers/net/can/xilinx_can.c                        |  2 +-
- drivers/net/ethernet/3com/typhoon.c                 |  2 +-
- drivers/net/ethernet/adi/bfin_mac.c                 |  2 +-
- drivers/net/ethernet/agere/et131x.c                 |  2 +-
- drivers/net/ethernet/altera/altera_tse_main.c       |  2 +-
- drivers/net/ethernet/apm/xgene/xgene_enet_main.c    |  2 +-
- drivers/net/ethernet/aquantia/atlantic/aq_vec.c     |  2 +-
- drivers/net/ethernet/arc/emac_main.c                |  2 +-
- drivers/net/ethernet/atheros/alx/main.c             |  2 +-
- drivers/net/ethernet/atheros/atl1c/atl1c_main.c     |  2 +-
- drivers/net/ethernet/atheros/atl1e/atl1e_main.c     |  2 +-
- drivers/net/ethernet/atheros/atlx/atl1.c            |  2 +-
- drivers/net/ethernet/broadcom/b44.c                 |  2 +-
- drivers/net/ethernet/broadcom/bcm63xx_enet.c        |  2 +-
- drivers/net/ethernet/broadcom/bgmac.c               |  2 +-
- drivers/net/ethernet/broadcom/bnx2.c                |  4 ++--
- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c     |  2 +-
- drivers/net/ethernet/broadcom/bnxt/bnxt.c           |  2 +-
- drivers/net/ethernet/broadcom/sb1250-mac.c          |  2 +-
- drivers/net/ethernet/brocade/bna/bnad.c             |  2 +-
- drivers/net/ethernet/cadence/macb.c                 |  2 +-
- drivers/net/ethernet/calxeda/xgmac.c                |  2 +-
- drivers/net/ethernet/cavium/liquidio/lio_main.c     |  2 +-
- drivers/net/ethernet/cavium/liquidio/lio_vf_main.c  |  2 +-
- drivers/net/ethernet/cavium/octeon/octeon_mgmt.c    |  2 +-
- drivers/net/ethernet/cavium/thunder/nicvf_main.c    |  2 +-
- drivers/net/ethernet/chelsio/cxgb/sge.c             |  2 +-
- drivers/net/ethernet/chelsio/cxgb3/sge.c            |  4 ++--
- drivers/net/ethernet/chelsio/cxgb4vf/sge.c          |  2 +-
- drivers/net/ethernet/cisco/enic/enic_main.c         |  4 ++--
- drivers/net/ethernet/dec/tulip/interrupt.c          |  6 +++---
- drivers/net/ethernet/dnet.c                         |  2 +-
- drivers/net/ethernet/emulex/benet/be_main.c         |  2 +-
- drivers/net/ethernet/ethoc.c                        |  2 +-
- drivers/net/ethernet/ezchip/nps_enet.c              |  2 +-
- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c      |  2 +-
- drivers/net/ethernet/freescale/fec_main.c           |  2 +-
- .../net/ethernet/freescale/fs_enet/fs_enet-main.c   |  2 +-
- drivers/net/ethernet/freescale/gianfar.c            |  4 ++--
- drivers/net/ethernet/freescale/ucc_geth.c           |  2 +-
- drivers/net/ethernet/hisilicon/hip04_eth.c          |  2 +-
- drivers/net/ethernet/hisilicon/hisi_femac.c         |  2 +-
- drivers/net/ethernet/hisilicon/hix5hd2_gmac.c       |  2 +-
- drivers/net/ethernet/ibm/ibmveth.c                  |  2 +-
- drivers/net/ethernet/ibm/ibmvnic.c                  |  2 +-
- drivers/net/ethernet/intel/e100.c                   |  2 +-
- drivers/net/ethernet/intel/ixgb/ixgb_main.c         |  2 +-
- drivers/net/ethernet/korina.c                       |  2 +-
- drivers/net/ethernet/lantiq_etop.c                  | 21 +++++++++------------
- drivers/net/ethernet/marvell/mv643xx_eth.c          |  2 +-
- drivers/net/ethernet/marvell/mvneta.c               |  6 ++----
- drivers/net/ethernet/marvell/mvpp2.c                |  2 +-
- drivers/net/ethernet/marvell/pxa168_eth.c           |  2 +-
- drivers/net/ethernet/moxa/moxart_ether.c            |  2 +-
- drivers/net/ethernet/myricom/myri10ge/myri10ge.c    |  2 +-
- drivers/net/ethernet/natsemi/natsemi.c              |  2 +-
- drivers/net/ethernet/neterion/s2io.c                |  4 ++--
- drivers/net/ethernet/neterion/vxge/vxge-main.c      |  6 +++---
- drivers/net/ethernet/nvidia/forcedeth.c             |  2 +-
- drivers/net/ethernet/nxp/lpc_eth.c                  |  2 +-
- .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c    |  2 +-
- drivers/net/ethernet/pasemi/pasemi_mac.c            |  2 +-
- .../net/ethernet/qlogic/netxen/netxen_nic_main.c    |  2 +-
- drivers/net/ethernet/qlogic/qede/qede_fp.c          |  2 +-
- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c      | 10 +++++-----
- drivers/net/ethernet/qlogic/qlge/qlge_main.c        |  2 +-
- drivers/net/ethernet/qualcomm/emac/emac.c           |  2 +-
- drivers/net/ethernet/realtek/r8169.c                |  2 +-
- drivers/net/ethernet/rocker/rocker_main.c           |  2 +-
- drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c     |  2 +-
- drivers/net/ethernet/sfc/efx.c                      |  2 +-
- drivers/net/ethernet/sfc/falcon/efx.c               |  2 +-
- drivers/net/ethernet/smsc/smsc9420.c                |  2 +-
- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c   |  2 +-
- drivers/net/ethernet/sun/niu.c                      |  2 +-
- drivers/net/ethernet/sun/sungem.c                   |  2 +-
- drivers/net/ethernet/sun/sunvnet_common.c           |  2 +-
- drivers/net/ethernet/tehuti/tehuti.c                |  2 +-
- drivers/net/ethernet/ti/cpsw.c                      |  2 +-
- drivers/net/ethernet/ti/davinci_emac.c              |  2 +-
- drivers/net/ethernet/ti/netcp_core.c                |  2 +-
- drivers/net/ethernet/tile/tilegx.c                  |  2 +-
- drivers/net/ethernet/tile/tilepro.c                 |  2 +-
- drivers/net/ethernet/toshiba/ps3_gelic_net.c        |  2 +-
- drivers/net/ethernet/toshiba/spider_net.c           |  2 +-
- drivers/net/ethernet/toshiba/tc35815.c              |  2 +-
- drivers/net/ethernet/tundra/tsi108_eth.c            |  2 +-
- drivers/net/ethernet/via/via-rhine.c                |  2 +-
- drivers/net/ethernet/via/via-velocity.c             |  2 +-
- drivers/net/ethernet/wiznet/w5100.c                 |  2 +-
- drivers/net/ethernet/wiznet/w5300.c                 |  2 +-
- drivers/net/fjes/fjes_main.c                        |  2 +-
- drivers/net/vmxnet3/vmxnet3_drv.c                   |  4 ++--
- drivers/net/wan/fsl_ucc_hdlc.c                      |  2 +-
- drivers/net/wan/hd64572.c                           |  2 +-
- drivers/net/wireless/ath/ath10k/pci.c               |  2 +-
- drivers/net/wireless/ath/wil6210/netdev.c           |  2 +-
- drivers/net/xen-netback/interface.c                 |  2 +-
- drivers/net/xen-netfront.c                          |  2 +-
- drivers/staging/octeon/ethernet-rx.c                |  2 +-
- drivers/staging/unisys/visornic/visornic_main.c     |  2 +-
- 109 files changed, 132 insertions(+), 137 deletions(-)
-
---- a/drivers/net/can/at91_can.c
-+++ b/drivers/net/can/at91_can.c
-@@ -813,7 +813,7 @@ static int at91_poll(struct napi_struct
- 		u32 reg_ier = AT91_IRQ_ERR_FRAME;
- 		reg_ier |= get_irq_mb_rx(priv) & ~AT91_MB_MASK(priv->rx_next);
- 
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		at91_write(priv, AT91_IER, reg_ier);
- 	}
- 
---- a/drivers/net/can/c_can/c_can.c
-+++ b/drivers/net/can/c_can/c_can.c
-@@ -1070,7 +1070,7 @@ static int c_can_poll(struct napi_struct
- 
- end:
- 	if (work_done < quota) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		/* enable all IRQs if we are not in bus off state */
- 		if (priv->can.state != CAN_STATE_BUS_OFF)
- 			c_can_irq_control(priv, true);
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -703,7 +703,7 @@ static int flexcan_poll(struct napi_stru
- 		work_done += flexcan_poll_bus_err(dev, reg_esr);
- 
- 	if (work_done < quota) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		/* enable IRQs */
- 		flexcan_write(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
- 		flexcan_write(priv->reg_ctrl_default, &regs->ctrl);
---- a/drivers/net/can/ifi_canfd/ifi_canfd.c
-+++ b/drivers/net/can/ifi_canfd/ifi_canfd.c
-@@ -589,7 +589,7 @@ static int ifi_canfd_poll(struct napi_st
- 		work_done += ifi_canfd_do_rx_poll(ndev, quota - work_done);
- 
- 	if (work_done < quota) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		ifi_canfd_irq_enable(ndev, 1);
- 	}
- 
---- a/drivers/net/can/janz-ican3.c
-+++ b/drivers/net/can/janz-ican3.c
-@@ -1475,7 +1475,7 @@ static int ican3_napi(struct napi_struct
- 	/* We have processed all packets that the adapter had, but it
- 	 * was less than our budget, stop polling */
- 	if (received < budget)
--		napi_complete(napi);
-+		napi_complete_done(napi, received);
- 
- 	spin_lock_irqsave(&mod->lock, flags);
- 
---- a/drivers/net/can/m_can/m_can.c
-+++ b/drivers/net/can/m_can/m_can.c
-@@ -730,7 +730,7 @@ static int m_can_poll(struct napi_struct
- 		work_done += m_can_do_rx_poll(dev, (quota - work_done));
- 
- 	if (work_done < quota) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		m_can_enable_all_interrupts(priv);
- 	}
- 
---- a/drivers/net/can/rcar/rcar_can.c
-+++ b/drivers/net/can/rcar/rcar_can.c
-@@ -698,7 +698,7 @@ static int rcar_can_rx_poll(struct napi_
- 	}
- 	/* All packets processed */
- 	if (num_pkts < quota) {
--		napi_complete(napi);
-+		napi_complete_done(napi, num_pkts);
- 		priv->ier |= RCAR_CAN_IER_RXFIE;
- 		writeb(priv->ier, &priv->regs->ier);
- 	}
---- a/drivers/net/can/rcar/rcar_canfd.c
-+++ b/drivers/net/can/rcar/rcar_canfd.c
-@@ -1512,7 +1512,7 @@ static int rcar_canfd_rx_poll(struct nap
- 
- 	/* All packets processed */
- 	if (num_pkts < quota) {
--		napi_complete(napi);
-+		napi_complete_done(napi, num_pkts);
- 		/* Enable Rx FIFO interrupts */
- 		rcar_canfd_set_bit(priv->base, RCANFD_RFCC(ridx),
- 				   RCANFD_RFCC_RFIE);
---- a/drivers/net/can/xilinx_can.c
-+++ b/drivers/net/can/xilinx_can.c
-@@ -838,7 +838,7 @@ static int xcan_rx_poll(struct napi_stru
- 	}
- 
- 	if (work_done < quota) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		ier = priv->read_reg(priv, XCAN_IER_OFFSET);
- 		ier |= XCAN_IXR_RXNEMP_MASK;
- 		priv->write_reg(priv, XCAN_IER_OFFSET, ier);
---- a/drivers/net/ethernet/3com/typhoon.c
-+++ b/drivers/net/ethernet/3com/typhoon.c
-@@ -1748,7 +1748,7 @@ typhoon_poll(struct napi_struct *napi, i
- 	}
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		iowrite32(TYPHOON_INTR_NONE,
- 				tp->ioaddr + TYPHOON_REG_INTR_MASK);
- 		typhoon_post_pci_writes(tp->ioaddr);
---- a/drivers/net/ethernet/adi/bfin_mac.c
-+++ b/drivers/net/ethernet/adi/bfin_mac.c
-@@ -1274,7 +1274,7 @@ static int bfin_mac_poll(struct napi_str
- 	}
- 
- 	if (i < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, i);
- 		if (test_and_clear_bit(BFIN_MAC_RX_IRQ_DISABLED, &lp->flags))
- 			enable_irq(IRQ_MAC_RX);
- 	}
---- a/drivers/net/ethernet/agere/et131x.c
-+++ b/drivers/net/ethernet/agere/et131x.c
-@@ -3573,7 +3573,7 @@ static int et131x_poll(struct napi_struc
- 	et131x_handle_send_pkts(adapter);
- 
- 	if (work_done < budget) {
--		napi_complete(&adapter->napi);
-+		napi_complete_done(&adapter->napi, work_done);
- 		et131x_enable_interrupts(adapter);
- 	}
- 
---- a/drivers/net/ethernet/altera/altera_tse_main.c
-+++ b/drivers/net/ethernet/altera/altera_tse_main.c
-@@ -491,7 +491,7 @@ static int tse_poll(struct napi_struct *
- 
- 	if (rxcomplete < budget) {
- 
--		napi_complete(napi);
-+		napi_complete_done(napi, rxcomplete);
- 
- 		netdev_dbg(priv->dev,
- 			   "NAPI Complete, did %d packets with budget %d\n",
---- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
-+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
-@@ -655,7 +655,7 @@ static int xgene_enet_napi(struct napi_s
- 	processed = xgene_enet_process_ring(ring, budget);
- 
- 	if (processed != budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, processed);
- 		enable_irq(ring->irq);
- 	}
- 
---- a/drivers/net/ethernet/arc/emac_main.c
-+++ b/drivers/net/ethernet/arc/emac_main.c
-@@ -284,7 +284,7 @@ static int arc_emac_poll(struct napi_str
- 
- 	work_done = arc_emac_rx(ndev, budget);
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		arc_reg_or(priv, R_ENABLE, RXINT_MASK | TXINT_MASK);
- 	}
- 
---- a/drivers/net/ethernet/atheros/alx/main.c
-+++ b/drivers/net/ethernet/atheros/alx/main.c
-@@ -292,7 +292,7 @@ static int alx_poll(struct napi_struct *
- 	if (!tx_complete || work == budget)
- 		return budget;
- 
--	napi_complete(&alx->napi);
-+	napi_complete_done(&alx->napi, work);
- 
- 	/* enable interrupt */
- 	if (alx->flags & ALX_FLAG_USING_MSIX) {
---- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
-+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
-@@ -1886,7 +1886,7 @@ static int atl1c_clean(struct napi_struc
- 
- 	if (work_done < budget) {
- quit_polling:
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		adapter->hw.intr_mask |= ISR_RX_PKT;
- 		AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask);
- 	}
---- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
-+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
-@@ -1532,7 +1532,7 @@ static int atl1e_clean(struct napi_struc
- 	/* If no Tx and not enough Rx work done, exit the polling mode */
- 	if (work_done < budget) {
- quit_polling:
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		imr_data = AT_READ_REG(&adapter->hw, REG_IMR);
- 		AT_WRITE_REG(&adapter->hw, REG_IMR, imr_data | ISR_RX_EVENT);
- 		/* test debug */
---- a/drivers/net/ethernet/atheros/atlx/atl1.c
-+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
-@@ -2457,7 +2457,7 @@ static int atl1_rings_clean(struct napi_
- 	if (work_done >= budget)
- 		return work_done;
- 
--	napi_complete(napi);
-+	napi_complete_done(napi, work_done);
- 	/* re-enable Interrupt */
- 	if (likely(adapter->int_enabled))
- 		atlx_imr_set(adapter, IMR_NORMAL_MASK);
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -902,7 +902,7 @@ static int b44_poll(struct napi_struct *
- 	}
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		b44_enable_ints(bp);
- 	}
- 
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -511,7 +511,7 @@ static int bcm_enet_poll(struct napi_str
- 
- 	/* no more packet in rx/tx queue, remove device from poll
- 	 * queue */
--	napi_complete(napi);
-+	napi_complete_done(napi, rx_work_done);
- 
- 	/* restore rx/tx interrupt */
- 	enet_dmac_writel(priv, priv->dma_chan_int_mask,
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -1146,7 +1146,7 @@ static int bgmac_poll(struct napi_struct
- 		return weight;
- 
- 	if (handled < weight) {
--		napi_complete(napi);
-+		napi_complete_done(napi, handled);
- 		bgmac_chip_intrs_on(bgmac);
- 	}
- 
---- a/drivers/net/ethernet/broadcom/bnx2.c
-+++ b/drivers/net/ethernet/broadcom/bnx2.c
-@@ -3522,7 +3522,7 @@ static int bnx2_poll_msix(struct napi_st
- 		rmb();
- 		if (likely(!bnx2_has_fast_work(bnapi))) {
- 
--			napi_complete(napi);
-+			napi_complete_done(napi, work_done);
- 			BNX2_WR(bp, BNX2_PCICFG_INT_ACK_CMD, bnapi->int_num |
- 				BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
- 				bnapi->last_status_idx);
-@@ -3559,7 +3559,7 @@ static int bnx2_poll(struct napi_struct
- 
- 		rmb();
- 		if (likely(!bnx2_has_work(bnapi))) {
--			napi_complete(napi);
-+			napi_complete_done(napi, work_done);
- 			if (likely(bp->flags & BNX2_FLAG_USING_MSI_OR_MSIX)) {
- 				BNX2_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
- 					BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
---- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
-+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
-@@ -3236,7 +3236,7 @@ static int bnx2x_poll(struct napi_struct
- 		 * has been updated when NAPI was scheduled.
- 		 */
- 		if (IS_FCOE_FP(fp)) {
--			napi_complete(napi);
-+			napi_complete_done(napi, rx_work_done);
- 		} else {
- 			bnx2x_update_fpsb_idx(fp);
- 			/* bnx2x_has_rx_work() reads the status block,
---- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
-+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
-@@ -1797,7 +1797,7 @@ static int bnxt_poll_nitroa0(struct napi
- 	}
- 
- 	if (!bnxt_has_work(bp, cpr) && rx_pkts < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_pkts);
- 		BNXT_CP_DB_REARM(cpr->cp_doorbell, cpr->cp_raw_cons);
- 	}
- 	return rx_pkts;
---- a/drivers/net/ethernet/broadcom/sb1250-mac.c
-+++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
-@@ -2545,7 +2545,7 @@ static int sbmac_poll(struct napi_struct
- 	sbdma_tx_process(sc, &(sc->sbm_txdma), 1);
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- #ifdef CONFIG_SBMAC_COALESCE
- 		__raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
---- a/drivers/net/ethernet/brocade/bna/bnad.c
-+++ b/drivers/net/ethernet/brocade/bna/bnad.c
-@@ -1881,7 +1881,7 @@ bnad_napi_poll_rx(struct napi_struct *na
- 		return rcvd;
- 
- poll_exit:
--	napi_complete(napi);
-+	napi_complete_done(napi, rcvd);
- 
- 	rx_ctrl->rx_complete++;
- 
---- a/drivers/net/ethernet/cadence/macb.c
-+++ b/drivers/net/ethernet/cadence/macb.c
-@@ -1069,7 +1069,7 @@ static int macb_poll(struct napi_struct
- 
- 	work_done = bp->macbgem_ops.mog_rx(bp, budget);
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		/* Packets received while interrupts were disabled */
- 		status = macb_readl(bp, RSR);
---- a/drivers/net/ethernet/calxeda/xgmac.c
-+++ b/drivers/net/ethernet/calxeda/xgmac.c
-@@ -1247,7 +1247,7 @@ static int xgmac_poll(struct napi_struct
- 	work_done = xgmac_rx(priv, budget);
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		__raw_writel(DMA_INTR_DEFAULT_MASK, priv->base + XGMAC_DMA_INTR_ENA);
- 	}
- 	return work_done;
---- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
-+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
-@@ -2433,7 +2433,7 @@ static int liquidio_napi_poll(struct nap
- 	}
- 
- 	if ((work_done < budget) && (tx_done)) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		octeon_process_droq_poll_cmd(droq->oct_dev, droq->q_no,
- 					     POLL_EVENT_ENABLE_INTR, 0);
- 		return 0;
---- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
-+++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
-@@ -501,7 +501,7 @@ static int octeon_mgmt_napi_poll(struct
- 
- 	if (work_done < budget) {
- 		/* We stopped because no more packets were available. */
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		octeon_mgmt_enable_rx_irq(p);
- 	}
- 	octeon_mgmt_update_rx_stats(netdev);
---- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
-+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
-@@ -748,7 +748,7 @@ static int nicvf_poll(struct napi_struct
- 
- 	if (work_done < budget) {
- 		/* Slow packet rate, exit polling */
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		/* Re-enable interrupts */
- 		cq_head = nicvf_queue_reg_read(nic, NIC_QSET_CQ_0_7_HEAD,
- 					       cq->cq_idx);
---- a/drivers/net/ethernet/chelsio/cxgb/sge.c
-+++ b/drivers/net/ethernet/chelsio/cxgb/sge.c
-@@ -1605,7 +1605,7 @@ int t1_poll(struct napi_struct *napi, in
- 	int work_done = process_responses(adapter, budget);
- 
- 	if (likely(work_done < budget)) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		writel(adapter->sge->respQ.cidx,
- 		       adapter->regs + A_SG_SLEEPING);
- 	}
---- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
-+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
-@@ -1843,7 +1843,7 @@ static int ofld_poll(struct napi_struct
- 		__skb_queue_head_init(&queue);
- 		skb_queue_splice_init(&q->rx_queue, &queue);
- 		if (skb_queue_empty(&queue)) {
--			napi_complete(napi);
-+			napi_complete_done(napi, work_done);
- 			spin_unlock_irq(&q->lock);
- 			return work_done;
- 		}
-@@ -2414,7 +2414,7 @@ static int napi_rx_handler(struct napi_s
- 	int work_done = process_responses(adap, qs, budget);
- 
- 	if (likely(work_done < budget)) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		/*
- 		 * Because we don't atomically flush the following
---- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
-+++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
-@@ -1889,7 +1889,7 @@ static int napi_rx_handler(struct napi_s
- 	u32 val;
- 
- 	if (likely(work_done < budget)) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		intr_params = rspq->next_intr_params;
- 		rspq->next_intr_params = rspq->intr_params;
- 	} else
---- a/drivers/net/ethernet/cisco/enic/enic_main.c
-+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
-@@ -1339,7 +1339,7 @@ static int enic_poll(struct napi_struct
- 		 * exit polling
- 		 */
- 
--		napi_complete(napi);
-+		napi_complete_done(napi, rq_work_done);
- 		if (enic->rx_coalesce_setting.use_adaptive_rx_coalesce)
- 			enic_set_int_moderation(enic, &enic->rq[0]);
- 		vnic_intr_unmask(&enic->intr[intr]);
-@@ -1496,7 +1496,7 @@ static int enic_poll_msix_rq(struct napi
- 		 * exit polling
- 		 */
- 
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		if (enic->rx_coalesce_setting.use_adaptive_rx_coalesce)
- 			enic_set_int_moderation(enic, &enic->rq[rq]);
- 		vnic_intr_unmask(&enic->intr[intr]);
---- a/drivers/net/ethernet/dec/tulip/interrupt.c
-+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
-@@ -319,8 +319,8 @@ int tulip_poll(struct napi_struct *napi,
- 
-          /* Remove us from polling list and enable RX intr. */
- 
--         napi_complete(napi);
--         iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
-+	napi_complete_done(napi, work_done);
-+	iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
- 
-          /* The last op happens after poll completion. Which means the following:
-           * 1. it can race with disabling irqs in irq handler
-@@ -355,7 +355,7 @@ int tulip_poll(struct napi_struct *napi,
-           * before we did napi_complete(). See? We would lose it. */
- 
-          /* remove ourselves from the polling list */
--         napi_complete(napi);
-+         napi_complete_done(napi, work_done);
- 
-          return work_done;
- }
---- a/drivers/net/ethernet/dnet.c
-+++ b/drivers/net/ethernet/dnet.c
-@@ -415,7 +415,7 @@ static int dnet_poll(struct napi_struct
- 		/* We processed all packets available.  Tell NAPI it can
- 		 * stop polling then re-enable rx interrupts.
- 		 */
--		napi_complete(napi);
-+		napi_complete_done(napi, npackets);
- 		int_enable = dnet_readl(bp, INTR_ENB);
- 		int_enable |= DNET_INTR_SRC_RX_CMDFIFOAF;
- 		dnet_writel(bp, int_enable, INTR_ENB);
---- a/drivers/net/ethernet/emulex/benet/be_main.c
-+++ b/drivers/net/ethernet/emulex/benet/be_main.c
-@@ -3344,7 +3344,7 @@ int be_poll(struct napi_struct *napi, in
- 		be_process_mcc(adapter);
- 
- 	if (max_work < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, max_work);
- 
- 		/* Skyhawk EQ_DB has a provision to set the rearm to interrupt
- 		 * delay via a delay multiplier encoding value
---- a/drivers/net/ethernet/ethoc.c
-+++ b/drivers/net/ethernet/ethoc.c
-@@ -614,7 +614,7 @@ static int ethoc_poll(struct napi_struct
- 	tx_work_done = ethoc_tx(priv->netdev, budget);
- 
- 	if (rx_work_done < budget && tx_work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_work_done);
- 		ethoc_enable_irq(priv, INT_MASK_TX | INT_MASK_RX);
- 	}
- 
---- a/drivers/net/ethernet/ezchip/nps_enet.c
-+++ b/drivers/net/ethernet/ezchip/nps_enet.c
-@@ -192,7 +192,7 @@ static int nps_enet_poll(struct napi_str
- 	if (work_done < budget) {
- 		u32 buf_int_enable_value = 0;
- 
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		/* set tx_done and rx_rdy bits */
- 		buf_int_enable_value |= NPS_ENET_ENABLE << RX_RDY_SHIFT;
---- a/drivers/net/ethernet/freescale/fec_main.c
-+++ b/drivers/net/ethernet/freescale/fec_main.c
-@@ -1623,7 +1623,7 @@ static int fec_enet_rx_napi(struct napi_
- 	fec_enet_tx(ndev);
- 
- 	if (pkts < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, pkts);
- 		writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
- 	}
- 	return pkts;
---- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
-+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
-@@ -301,7 +301,7 @@ static int fs_enet_napi(struct napi_stru
- 
- 	if (received < budget && tx_left) {
- 		/* done */
--		napi_complete(napi);
-+		napi_complete_done(napi, received);
- 		(*fep->ops->napi_enable)(dev);
- 
- 		return received;
---- a/drivers/net/ethernet/freescale/gianfar.c
-+++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -3197,7 +3197,7 @@ static int gfar_poll_rx_sq(struct napi_s
- 
- 	if (work_done < budget) {
- 		u32 imask;
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		/* Clear the halt bit in RSTAT */
- 		gfar_write(&regs->rstat, gfargrp->rstat);
- 
-@@ -3286,7 +3286,7 @@ static int gfar_poll_rx(struct napi_stru
- 
- 	if (!num_act_queues) {
- 		u32 imask;
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		/* Clear the halt bit in RSTAT */
- 		gfar_write(&regs->rstat, gfargrp->rstat);
---- a/drivers/net/ethernet/freescale/ucc_geth.c
-+++ b/drivers/net/ethernet/freescale/ucc_geth.c
-@@ -3303,7 +3303,7 @@ static int ucc_geth_poll(struct napi_str
- 		howmany += ucc_geth_rx(ugeth, i, budget - howmany);
- 
- 	if (howmany < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, howmany);
- 		setbits32(ugeth->uccf->p_uccm, UCCE_RX_EVENTS | UCCE_TX_EVENTS);
- 	}
- 
---- a/drivers/net/ethernet/hisilicon/hip04_eth.c
-+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
-@@ -555,7 +555,7 @@ refill:
- 		priv->reg_inten |= RCV_INT;
- 		writel_relaxed(priv->reg_inten, priv->base + PPE_INTEN);
- 	}
--	napi_complete(napi);
-+	napi_complete_done(napi, rx);
- done:
- 	/* clean up tx descriptors and start a new timer if necessary */
- 	tx_remaining = hip04_tx_reclaim(ndev, false);
---- a/drivers/net/ethernet/hisilicon/hisi_femac.c
-+++ b/drivers/net/ethernet/hisilicon/hisi_femac.c
-@@ -330,7 +330,7 @@ static int hisi_femac_poll(struct napi_s
- 	} while (ints & DEF_INT_MASK);
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		hisi_femac_irq_enable(priv, DEF_INT_MASK &
- 					(~IRQ_INT_TX_PER_PACKET));
- 	}
---- a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
-+++ b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
-@@ -578,7 +578,7 @@ static int hix5hd2_poll(struct napi_stru
- 	} while (ints & DEF_INT_MASK);
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		hix5hd2_irq_enable(priv);
- 	}
- 
---- a/drivers/net/ethernet/ibm/ibmveth.c
-+++ b/drivers/net/ethernet/ibm/ibmveth.c
-@@ -1323,7 +1323,7 @@ static int ibmveth_poll(struct napi_stru
- 	ibmveth_replenish_task(adapter);
- 
- 	if (frames_processed < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, frames_processed);
- 
- 		/* We think we are done - reenable interrupts,
- 		 * then check once more to make sure we are done.
---- a/drivers/net/ethernet/ibm/ibmvnic.c
-+++ b/drivers/net/ethernet/ibm/ibmvnic.c
-@@ -1028,7 +1028,7 @@ restart_poll:
- 
- 	if (frames_processed < budget) {
- 		enable_scrq_irq(adapter, adapter->rx_scrq[scrq_num]);
--		napi_complete(napi);
-+		napi_complete_done(napi, frames_processed);
- 		if (pending_scrq(adapter, adapter->rx_scrq[scrq_num]) &&
- 		    napi_reschedule(napi)) {
- 			disable_scrq_irq(adapter, adapter->rx_scrq[scrq_num]);
---- a/drivers/net/ethernet/intel/e100.c
-+++ b/drivers/net/ethernet/intel/e100.c
-@@ -2253,7 +2253,7 @@ static int e100_poll(struct napi_struct
- 
- 	/* If budget not fully consumed, exit the polling mode */
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		e100_enable_irq(nic);
- 	}
- 
---- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
-+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
-@@ -1825,7 +1825,7 @@ ixgb_clean(struct napi_struct *napi, int
- 
- 	/* If budget not fully consumed, exit the polling mode */
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		if (!test_bit(__IXGB_DOWN, &adapter->flags))
- 			ixgb_irq_enable(adapter);
- 	}
---- a/drivers/net/ethernet/korina.c
-+++ b/drivers/net/ethernet/korina.c
-@@ -464,7 +464,7 @@ static int korina_poll(struct napi_struc
- 
- 	work_done = korina_rx(dev, budget);
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		writel(readl(&lp->rx_dma_regs->dmasm) &
- 			~(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -156,24 +156,21 @@ ltq_etop_poll_rx(struct napi_struct *nap
- {
- 	struct ltq_etop_chan *ch = container_of(napi,
- 				struct ltq_etop_chan, napi);
--	int rx = 0;
--	int complete = 0;
-+	int work_done = 0;
- 
--	while ((rx < budget) && !complete) {
-+	while (work_done < budget) {
- 		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
- 
--		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
--			ltq_etop_hw_receive(ch);
--			rx++;
--		} else {
--			complete = 1;
--		}
-+		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) != LTQ_DMA_C)
-+			break;
-+		ltq_etop_hw_receive(ch);
-+		work_done++;
- 	}
--	if (complete || !rx) {
--		napi_complete(&ch->napi);
-+	if (work_done < budget) {
-+		napi_complete_done(&ch->napi, work_done);
- 		ltq_dma_ack_irq(&ch->dma);
- 	}
--	return rx;
-+	return work_done;
- }
- 
- static int
---- a/drivers/net/ethernet/marvell/mv643xx_eth.c
-+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
-@@ -2312,7 +2312,7 @@ static int mv643xx_eth_poll(struct napi_
- 	if (work_done < budget) {
- 		if (mp->oom)
- 			mod_timer(&mp->rx_oom, jiffies + (HZ / 10));
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		wrlp(mp, INT_MASK, mp->int_mask);
- 	}
- 
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2702,11 +2702,9 @@ static int mvneta_poll(struct napi_struc
- 			rx_done = mvneta_rx_swbm(pp, budget, &pp->rxqs[rx_queue]);
- 	}
- 
--	budget -= rx_done;
--
--	if (budget > 0) {
-+	if (rx_done < budget) {
- 		cause_rx_tx = 0;
--		napi_complete(&port->napi);
-+		napi_complete_done(&port->napi, rx_done);
- 		enable_percpu_irq(pp->dev->irq, 0);
- 	}
- 
---- a/drivers/net/ethernet/marvell/mvpp2.c
-+++ b/drivers/net/ethernet/marvell/mvpp2.c
-@@ -5406,7 +5406,7 @@ static int mvpp2_poll(struct napi_struct
- 
- 	if (budget > 0) {
- 		cause_rx = 0;
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_done);
- 
- 		mvpp2_interrupts_enable(port);
- 	}
---- a/drivers/net/ethernet/marvell/pxa168_eth.c
-+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
-@@ -1264,7 +1264,7 @@ static int pxa168_rx_poll(struct napi_st
- 	}
- 	work_done = rxq_process(dev, budget);
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		wrl(pep, INT_MASK, ALL_INTS);
- 	}
- 
---- a/drivers/net/ethernet/moxa/moxart_ether.c
-+++ b/drivers/net/ethernet/moxa/moxart_ether.c
-@@ -270,7 +270,7 @@ rx_next:
- 	}
- 
- 	if (rx < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rx);
- 	}
- 
- 	priv->reg_imr |= RPKT_FINISH_M;
---- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
-+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
-@@ -1678,7 +1678,7 @@ static int myri10ge_poll(struct napi_str
- 
- 	myri10ge_ss_unlock_napi(ss);
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		put_be32(htonl(3), ss->irq_claim);
- 	}
- 	return work_done;
---- a/drivers/net/ethernet/natsemi/natsemi.c
-+++ b/drivers/net/ethernet/natsemi/natsemi.c
-@@ -2261,7 +2261,7 @@ static int natsemi_poll(struct napi_stru
- 		np->intr_status = readl(ioaddr + IntrStatus);
- 	} while (np->intr_status);
- 
--	napi_complete(napi);
-+	napi_complete_done(napi, work_done);
- 
- 	/* Reenable interrupts providing nothing is trying to shut
- 	 * the chip down. */
---- a/drivers/net/ethernet/neterion/s2io.c
-+++ b/drivers/net/ethernet/neterion/s2io.c
-@@ -2783,7 +2783,7 @@ static int s2io_poll_msix(struct napi_st
- 	s2io_chk_rx_buffers(nic, ring);
- 
- 	if (pkts_processed < budget_org) {
--		napi_complete(napi);
-+		napi_complete_done(napi, pkts_processed);
- 		/*Re Enable MSI-Rx Vector*/
- 		addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
- 		addr += 7 - ring->ring_no;
-@@ -2817,7 +2817,7 @@ static int s2io_poll_inta(struct napi_st
- 			break;
- 	}
- 	if (pkts_processed < budget_org) {
--		napi_complete(napi);
-+		napi_complete_done(napi, pkts_processed);
- 		/* Re enable the Rx interrupts for the ring */
- 		writeq(0, &bar0->rx_traffic_mask);
- 		readl(&bar0->rx_traffic_mask);
---- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
-+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
-@@ -1823,8 +1823,8 @@ static int vxge_poll_msix(struct napi_st
- 	vxge_hw_vpath_poll_rx(ring->handle);
- 	pkts_processed = ring->pkts_processed;
- 
--	if (ring->pkts_processed < budget_org) {
--		napi_complete(napi);
-+	if (pkts_processed < budget_org) {
-+		napi_complete_done(napi, pkts_processed);
- 
- 		/* Re enable the Rx interrupts for the vpath */
- 		vxge_hw_channel_msix_unmask(
-@@ -1863,7 +1863,7 @@ static int vxge_poll_inta(struct napi_st
- 	VXGE_COMPLETE_ALL_TX(vdev);
- 
- 	if (pkts_processed < budget_org) {
--		napi_complete(napi);
-+		napi_complete_done(napi, pkts_processed);
- 		/* Re enable the Rx interrupts for the ring */
- 		vxge_hw_device_unmask_all(hldev);
- 		vxge_hw_device_flush_io(hldev);
---- a/drivers/net/ethernet/nvidia/forcedeth.c
-+++ b/drivers/net/ethernet/nvidia/forcedeth.c
-@@ -3756,7 +3756,7 @@ static int nv_napi_poll(struct napi_stru
- 	if (rx_work < budget) {
- 		/* re-enable interrupts
- 		   (msix not enabled in napi) */
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_work);
- 
- 		writel(np->irqmask, base + NvRegIrqMask);
- 	}
---- a/drivers/net/ethernet/nxp/lpc_eth.c
-+++ b/drivers/net/ethernet/nxp/lpc_eth.c
-@@ -999,7 +999,7 @@ static int lpc_eth_poll(struct napi_stru
- 	rx_done = __lpc_handle_recv(ndev, budget);
- 
- 	if (rx_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_done);
- 		lpc_eth_enable_int(pldat->net_base);
- 	}
- 
---- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
-+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
-@@ -2391,7 +2391,7 @@ static int pch_gbe_napi_poll(struct napi
- 		poll_end_flag = true;
- 
- 	if (poll_end_flag) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		pch_gbe_irq_enable(adapter);
- 	}
- 
---- a/drivers/net/ethernet/pasemi/pasemi_mac.c
-+++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
-@@ -1575,7 +1575,7 @@ static int pasemi_mac_poll(struct napi_s
- 	pkts = pasemi_mac_clean_rx(rx_ring(mac), budget);
- 	if (pkts < budget) {
- 		/* all done, no more packets present */
--		napi_complete(napi);
-+		napi_complete_done(napi, pkts);
- 
- 		pasemi_mac_restart_rx_intr(mac);
- 		pasemi_mac_restart_tx_intr(mac);
---- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
-+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
-@@ -2391,7 +2391,7 @@ static int netxen_nic_poll(struct napi_s
- 		work_done = budget;
- 
- 	if (work_done < budget) {
--		napi_complete(&sds_ring->napi);
-+		napi_complete_done(&sds_ring->napi, work_done);
- 		if (test_bit(__NX_DEV_UP, &adapter->state))
- 			netxen_nic_enable_int(sds_ring);
- 	}
---- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
-+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
-@@ -975,7 +975,7 @@ static int qlcnic_poll(struct napi_struc
- 		work_done = budget;
- 
- 	if (work_done < budget) {
--		napi_complete(&sds_ring->napi);
-+		napi_complete_done(&sds_ring->napi, work_done);
- 		if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
- 			qlcnic_enable_sds_intr(adapter, sds_ring);
- 			qlcnic_enable_tx_intr(adapter, tx_ring);
-@@ -1019,7 +1019,7 @@ static int qlcnic_rx_poll(struct napi_st
- 	work_done = qlcnic_process_rcv_ring(sds_ring, budget);
- 
- 	if (work_done < budget) {
--		napi_complete(&sds_ring->napi);
-+		napi_complete_done(&sds_ring->napi, work_done);
- 		if (test_bit(__QLCNIC_DEV_UP, &adapter->state))
- 			qlcnic_enable_sds_intr(adapter, sds_ring);
- 	}
-@@ -1966,7 +1966,7 @@ static int qlcnic_83xx_msix_sriov_vf_pol
- 		work_done = budget;
- 
- 	if (work_done < budget) {
--		napi_complete(&sds_ring->napi);
-+		napi_complete_done(&sds_ring->napi, work_done);
- 		qlcnic_enable_sds_intr(adapter, sds_ring);
- 	}
- 
-@@ -1994,7 +1994,7 @@ static int qlcnic_83xx_poll(struct napi_
- 		work_done = budget;
- 
- 	if (work_done < budget) {
--		napi_complete(&sds_ring->napi);
-+		napi_complete_done(&sds_ring->napi, work_done);
- 		qlcnic_enable_sds_intr(adapter, sds_ring);
- 	}
- 
-@@ -2032,7 +2032,7 @@ static int qlcnic_83xx_rx_poll(struct na
- 	adapter = sds_ring->adapter;
- 	work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget);
- 	if (work_done < budget) {
--		napi_complete(&sds_ring->napi);
-+		napi_complete_done(&sds_ring->napi, work_done);
- 		if (test_bit(__QLCNIC_DEV_UP, &adapter->state))
- 			qlcnic_enable_sds_intr(adapter, sds_ring);
- 	}
---- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
-+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
-@@ -2334,7 +2334,7 @@ static int ql_napi_poll_msix(struct napi
- 	}
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		ql_enable_completion_interrupt(qdev, rx_ring->irq);
- 	}
- 	return work_done;
---- a/drivers/net/ethernet/qualcomm/emac/emac.c
-+++ b/drivers/net/ethernet/qualcomm/emac/emac.c
-@@ -129,7 +129,7 @@ static int emac_napi_rtx(struct napi_str
- 	emac_mac_rx_process(adpt, rx_q, &work_done, budget);
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		irq->mask |= rx_q->intr;
- 		writel(irq->mask, adpt->base + EMAC_INT_MASK);
---- a/drivers/net/ethernet/realtek/r8169.c
-+++ b/drivers/net/ethernet/realtek/r8169.c
-@@ -7578,7 +7578,7 @@ static int rtl8169_poll(struct napi_stru
- 	}
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		rtl_irq_enable(tp, enable_mask);
- 		mmiowb();
---- a/drivers/net/ethernet/rocker/rocker_main.c
-+++ b/drivers/net/ethernet/rocker/rocker_main.c
-@@ -2480,7 +2480,7 @@ static int rocker_port_poll_rx(struct na
- 	}
- 
- 	if (credits < budget)
--		napi_complete(napi);
-+		napi_complete_done(napi, credits);
- 
- 	rocker_dma_ring_credits_set(rocker, &rocker_port->rx_ring, credits);
- 
---- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
-+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
-@@ -1578,7 +1578,7 @@ static int sxgbe_poll(struct napi_struct
- 
- 	work_done = sxgbe_rx(priv, budget);
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		priv->hw->dma->enable_dma_irq(priv->ioaddr, qnum);
- 	}
- 
---- a/drivers/net/ethernet/sfc/efx.c
-+++ b/drivers/net/ethernet/sfc/efx.c
-@@ -332,7 +332,7 @@ static int efx_poll(struct napi_struct *
- 		 * since efx_nic_eventq_read_ack() will have no effect if
- 		 * interrupts have already been disabled.
- 		 */
--		napi_complete(napi);
-+		napi_complete_done(napi, spent);
- 		efx_nic_eventq_read_ack(channel);
- 	}
- 
---- a/drivers/net/ethernet/smsc/smsc9420.c
-+++ b/drivers/net/ethernet/smsc/smsc9420.c
-@@ -869,7 +869,7 @@ static int smsc9420_rx_poll(struct napi_
- 	smsc9420_pci_flush_write(pd);
- 
- 	if (work_done < budget) {
--		napi_complete(&pd->napi);
-+		napi_complete_done(&pd->napi, work_done);
- 
- 		/* re-enable RX DMA interrupts */
- 		dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA);
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -2700,7 +2700,7 @@ static int stmmac_poll(struct napi_struc
- 
- 	work_done = stmmac_rx(priv, budget);
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		stmmac_enable_dma_irq(priv);
- 	}
- 	return work_done;
---- a/drivers/net/ethernet/sun/niu.c
-+++ b/drivers/net/ethernet/sun/niu.c
-@@ -3785,7 +3785,7 @@ static int niu_poll(struct napi_struct *
- 	work_done = niu_poll_core(np, lp, budget);
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		niu_ldg_rearm(np, lp, 1);
- 	}
- 	return work_done;
---- a/drivers/net/ethernet/sun/sungem.c
-+++ b/drivers/net/ethernet/sun/sungem.c
-@@ -924,7 +924,7 @@ static int gem_poll(struct napi_struct *
- 		gp->status = readl(gp->regs + GREG_STAT);
- 	} while (gp->status & GREG_STAT_NAPI);
- 
--	napi_complete(napi);
-+	napi_complete_done(napi, work_done);
- 	gem_enable_ints(gp);
- 
- 	return work_done;
---- a/drivers/net/ethernet/sun/sunvnet_common.c
-+++ b/drivers/net/ethernet/sun/sunvnet_common.c
-@@ -850,7 +850,7 @@ int sunvnet_poll_common(struct napi_stru
- 	int processed = vnet_event_napi(port, budget);
- 
- 	if (processed < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, processed);
- 		port->rx_event &= ~LDC_EVENT_DATA_READY;
- 		vio_set_intr(vio->vdev->rx_ino, HV_INTR_ENABLED);
- 	}
---- a/drivers/net/ethernet/tehuti/tehuti.c
-+++ b/drivers/net/ethernet/tehuti/tehuti.c
-@@ -303,7 +303,7 @@ static int bdx_poll(struct napi_struct *
- 		 * device lock and allow waiting tasks (eg rmmod) to advance) */
- 		priv->napi_stop = 0;
- 
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		bdx_enable_interrupts(priv);
- 	}
- 	return work_done;
---- a/drivers/net/ethernet/ti/cpsw.c
-+++ b/drivers/net/ethernet/ti/cpsw.c
-@@ -843,7 +843,7 @@ static int cpsw_rx_poll(struct napi_stru
- 	}
- 
- 	if (num_rx < budget) {
--		napi_complete(napi_rx);
-+		napi_complete_done(napi_rx, num_rx);
- 		writel(0xff, &cpsw->wr_regs->rx_en);
- 		if (cpsw->quirk_irq && cpsw->rx_irq_disabled) {
- 			cpsw->rx_irq_disabled = false;
---- a/drivers/net/ethernet/ti/davinci_emac.c
-+++ b/drivers/net/ethernet/ti/davinci_emac.c
-@@ -1295,7 +1295,7 @@ static int emac_poll(struct napi_struct
- 					&emac_rxhost_errcodes[cause][0], ch);
- 		}
- 	} else if (num_rx_pkts < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, num_rx_pkts);
- 		emac_int_enable(priv);
- 	}
- 
---- a/drivers/net/ethernet/ti/netcp_core.c
-+++ b/drivers/net/ethernet/ti/netcp_core.c
-@@ -939,7 +939,7 @@ static int netcp_rx_poll(struct napi_str
- 
- 	netcp_rxpool_refill(netcp);
- 	if (packets < budget) {
--		napi_complete(&netcp->rx_napi);
-+		napi_complete_done(&netcp->rx_napi, packets);
- 		knav_queue_enable_notify(netcp->rx_queue);
- 	}
- 
---- a/drivers/net/ethernet/tile/tilegx.c
-+++ b/drivers/net/ethernet/tile/tilegx.c
-@@ -678,7 +678,7 @@ static int tile_net_poll(struct napi_str
- 	}
- 
- 	/* There are no packets left. */
--	napi_complete(&info_mpipe->napi);
-+	napi_complete_done(&info_mpipe->napi, work);
- 
- 	md = &mpipe_data[instance];
- 	/* Re-enable hypervisor interrupts. */
---- a/drivers/net/ethernet/tile/tilepro.c
-+++ b/drivers/net/ethernet/tile/tilepro.c
-@@ -842,7 +842,7 @@ static int tile_net_poll(struct napi_str
- 		}
- 	}
- 
--	napi_complete(&info->napi);
-+	napi_complete_done(&info->napi, work);
- 
- 	if (!priv->active)
- 		goto done;
---- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
-+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
-@@ -1109,7 +1109,7 @@ static int gelic_net_poll(struct napi_st
- 	}
- 
- 	if (packets_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, packets_done);
- 		gelic_card_rx_irq_on(card);
- 	}
- 	return packets_done;
---- a/drivers/net/ethernet/toshiba/spider_net.c
-+++ b/drivers/net/ethernet/toshiba/spider_net.c
-@@ -1270,7 +1270,7 @@ static int spider_net_poll(struct napi_s
- 	/* if all packets are in the stack, enable interrupts and return 0 */
- 	/* if not, return 1 */
- 	if (packets_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, packets_done);
- 		spider_net_rx_irq_on(card);
- 		card->ignore_rx_ramfull = 0;
- 	}
---- a/drivers/net/ethernet/toshiba/tc35815.c
-+++ b/drivers/net/ethernet/toshiba/tc35815.c
-@@ -1639,7 +1639,7 @@ static int tc35815_poll(struct napi_stru
- 	spin_unlock(&lp->rx_lock);
- 
- 	if (received < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, received);
- 		/* enable interrupts */
- 		tc_writel(tc_readl(&tr->DMA_Ctl) & ~DMA_IntMask, &tr->DMA_Ctl);
- 	}
---- a/drivers/net/ethernet/tundra/tsi108_eth.c
-+++ b/drivers/net/ethernet/tundra/tsi108_eth.c
-@@ -887,7 +887,7 @@ static int tsi108_poll(struct napi_struc
- 
- 	if (num_received < budget) {
- 		data->rxpending = 0;
--		napi_complete(napi);
-+		napi_complete_done(napi, num_received);
- 
- 		TSI_WRITE(TSI108_EC_INTMASK,
- 				     TSI_READ(TSI108_EC_INTMASK)
---- a/drivers/net/ethernet/via/via-rhine.c
-+++ b/drivers/net/ethernet/via/via-rhine.c
-@@ -861,7 +861,7 @@ static int rhine_napipoll(struct napi_st
- 	}
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		iowrite16(enable_mask, ioaddr + IntrEnable);
- 		mmiowb();
- 	}
---- a/drivers/net/ethernet/via/via-velocity.c
-+++ b/drivers/net/ethernet/via/via-velocity.c
-@@ -2160,7 +2160,7 @@ static int velocity_poll(struct napi_str
- 	velocity_tx_srv(vptr);
- 	/* If budget not fully consumed, exit the polling mode */
- 	if (rx_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_done);
- 		mac_enable_int(vptr->mac_regs);
- 	}
- 	spin_unlock_irqrestore(&vptr->lock, flags);
---- a/drivers/net/ethernet/wiznet/w5100.c
-+++ b/drivers/net/ethernet/wiznet/w5100.c
-@@ -915,7 +915,7 @@ static int w5100_napi_poll(struct napi_s
- 	}
- 
- 	if (rx_count < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_count);
- 		w5100_enable_intr(priv);
- 	}
- 
---- a/drivers/net/ethernet/wiznet/w5300.c
-+++ b/drivers/net/ethernet/wiznet/w5300.c
-@@ -417,7 +417,7 @@ static int w5300_napi_poll(struct napi_s
- 	}
- 
- 	if (rx_count < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_count);
- 		w5300_write(priv, W5300_IMR, IR_S0);
- 		mmiowb();
- 	}
---- a/drivers/net/fjes/fjes_main.c
-+++ b/drivers/net/fjes/fjes_main.c
-@@ -1122,7 +1122,7 @@ static int fjes_poll(struct napi_struct
- 	}
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		if (adapter->unset_rx_last) {
- 			adapter->rx_last_jiffies = jiffies;
---- a/drivers/net/vmxnet3/vmxnet3_drv.c
-+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
-@@ -1873,7 +1873,7 @@ vmxnet3_poll(struct napi_struct *napi, i
- 	rxd_done = vmxnet3_do_poll(rx_queue->adapter, budget);
- 
- 	if (rxd_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rxd_done);
- 		vmxnet3_enable_all_intrs(rx_queue->adapter);
- 	}
- 	return rxd_done;
-@@ -1904,7 +1904,7 @@ vmxnet3_poll_rx_only(struct napi_struct
- 	rxd_done = vmxnet3_rq_rx_complete(rq, adapter, budget);
- 
- 	if (rxd_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, rxd_done);
- 		vmxnet3_enable_intr(adapter, rq->comp_ring.intr_idx);
- 	}
- 	return rxd_done;
---- a/drivers/net/wan/fsl_ucc_hdlc.c
-+++ b/drivers/net/wan/fsl_ucc_hdlc.c
-@@ -573,7 +573,7 @@ static int ucc_hdlc_poll(struct napi_str
- 	howmany += hdlc_rx_done(priv, budget - howmany);
- 
- 	if (howmany < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, howmany);
- 		qe_setbits32(priv->uccf->p_uccm,
- 			     (UCCE_HDLC_RX_EVENTS | UCCE_HDLC_TX_EVENTS) << 16);
- 	}
---- a/drivers/net/wan/hd64572.c
-+++ b/drivers/net/wan/hd64572.c
-@@ -341,7 +341,7 @@ static int sca_poll(struct napi_struct *
- 		received = sca_rx_done(port, budget);
- 
- 	if (received < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, received);
- 		enable_intr(port);
- 	}
- 
---- a/drivers/net/wireless/ath/ath10k/pci.c
-+++ b/drivers/net/wireless/ath/ath10k/pci.c
-@@ -2804,7 +2804,7 @@ static int ath10k_pci_napi_poll(struct n
- 	done = ath10k_htt_txrx_compl_task(ar, budget);
- 
- 	if (done < budget) {
--		napi_complete(ctx);
-+		napi_complete_done(ctx, done);
- 		/* In case of MSI, it is possible that interrupts are received
- 		 * while NAPI poll is inprogress. So pending interrupts that are
- 		 * received after processing all copy engine pipes by NAPI poll
---- a/drivers/net/wireless/ath/wil6210/netdev.c
-+++ b/drivers/net/wireless/ath/wil6210/netdev.c
-@@ -84,7 +84,7 @@ static int wil6210_netdev_poll_rx(struct
- 	done = budget - quota;
- 
- 	if (done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, done);
- 		wil6210_unmask_irq_rx(wil);
- 		wil_dbg_txrx(wil, "NAPI RX complete\n");
- 	}
---- a/drivers/net/xen-netback/interface.c
-+++ b/drivers/net/xen-netback/interface.c
-@@ -104,7 +104,7 @@ static int xenvif_poll(struct napi_struc
- 	work_done = xenvif_tx_action(queue, budget);
- 
- 	if (work_done < budget) {
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 		/* If the queue is rate-limited, it shall be
- 		 * rescheduled in the timer callback.
- 		 */
---- a/drivers/net/xen-netfront.c
-+++ b/drivers/net/xen-netfront.c
-@@ -1070,7 +1070,7 @@ err:
- 	if (work_done < budget) {
- 		int more_to_do = 0;
- 
--		napi_complete(napi);
-+		napi_complete_done(napi, work_done);
- 
- 		RING_FINAL_CHECK_FOR_RESPONSES(&queue->rx, more_to_do);
- 		if (more_to_do)
---- a/drivers/staging/octeon/ethernet-rx.c
-+++ b/drivers/staging/octeon/ethernet-rx.c
-@@ -429,7 +429,7 @@ static int cvm_oct_napi_poll(struct napi
- 
- 	if (rx_count < budget) {
- 		/* No more work */
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_count);
- 		enable_irq(rx_group->irq);
- 	}
- 	return rx_count;
---- a/drivers/staging/unisys/visornic/visornic_main.c
-+++ b/drivers/staging/unisys/visornic/visornic_main.c
-@@ -1657,7 +1657,7 @@ static int visornic_poll(struct napi_str
- 
- 	/* If there aren't any more packets to receive stop the poll */
- 	if (rx_count < budget)
--		napi_complete(napi);
-+		napi_complete_done(napi, rx_count);
- 
- 	return rx_count;
- }
diff --git a/target/linux/generic/backport-4.9/094-v4.12-0001-ip6_tunnel-Fix-missing-tunnel-encapsulation-limit-op.patch b/target/linux/generic/backport-4.9/094-v4.12-0001-ip6_tunnel-Fix-missing-tunnel-encapsulation-limit-op.patch
deleted file mode 100644
index 7c3c5608c5..0000000000
--- a/target/linux/generic/backport-4.9/094-v4.12-0001-ip6_tunnel-Fix-missing-tunnel-encapsulation-limit-op.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 89a23c8b528bd2c89f3981573d6cd7d23840c8a6 Mon Sep 17 00:00:00 2001
-From: Craig Gallek <cgallek@google.com>
-Date: Wed, 26 Apr 2017 14:37:45 -0400
-Subject: [PATCH] ip6_tunnel: Fix missing tunnel encapsulation limit option
-
-The IPv6 tunneling code tries to insert IPV6_TLV_TNL_ENCAP_LIMIT and
-IPV6_TLV_PADN options when an encapsulation limit is defined (the
-default is a limit of 4).  An MTU adjustment is done to account for
-these options as well.  However, the options are never present in the
-generated packets.
-
-The issue appears to be a subtlety between IPV6_DSTOPTS and
-IPV6_RTHDRDSTOPTS defined in RFC 3542.  When the IPIP tunnel driver was
-written, the encap limit options were included as IPV6_RTHDRDSTOPTS in
-dst0opt of struct ipv6_txoptions.  Later, ipv6_push_nfrags_opts was
-(correctly) updated to require IPV6_RTHDR options when IPV6_RTHDRDSTOPTS
-are to be used.  This caused the options to no longer be included in v6
-encapsulated packets.
-
-The fix is to use IPV6_DSTOPTS (in dst1opt of struct ipv6_txoptions)
-instead.  IPV6_DSTOPTS do not have the additional IPV6_RTHDR requirement.
-
-Fixes: 1df64a8569c7: ("[IPV6]: Add ip6ip6 tunnel driver.")
-Fixes: 333fad5364d6: ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542)")
-Signed-off-by: Craig Gallek <kraig@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv6/ip6_tunnel.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -958,7 +958,7 @@ static void init_tel_txopt(struct ipv6_t
- 	opt->dst_opt[5] = IPV6_TLV_PADN;
- 	opt->dst_opt[6] = 1;
- 
--	opt->ops.dst0opt = (struct ipv6_opt_hdr *) opt->dst_opt;
-+	opt->ops.dst1opt = (struct ipv6_opt_hdr *) opt->dst_opt;
- 	opt->ops.opt_nflen = 8;
- }
- 
-@@ -1200,7 +1200,7 @@ route_lookup:
- 
- 	if (encap_limit >= 0) {
- 		init_tel_txopt(&opt, encap_limit);
--		ipv6_push_nfrag_opts(skb, &opt.ops, &proto, NULL);
-+		ipv6_push_frag_opts(skb, &opt.ops, &proto);
- 	}
- 
- 	skb_push(skb, sizeof(struct ipv6hdr));
diff --git a/target/linux/generic/backport-4.9/094-v4.12-0002-ipv6-Need-to-export-ipv6_push_frag_opts-for-tunnelin.patch b/target/linux/generic/backport-4.9/094-v4.12-0002-ipv6-Need-to-export-ipv6_push_frag_opts-for-tunnelin.patch
deleted file mode 100644
index d102e7bb85..0000000000
--- a/target/linux/generic/backport-4.9/094-v4.12-0002-ipv6-Need-to-export-ipv6_push_frag_opts-for-tunnelin.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 5b8481fa42ac58484d633b558579e302aead64c1 Mon Sep 17 00:00:00 2001
-From: "David S. Miller" <davem@davemloft.net>
-Date: Mon, 1 May 2017 15:10:20 -0400
-Subject: [PATCH] ipv6: Need to export ipv6_push_frag_opts for tunneling now.
-
-Since that change also made the nfrag function not necessary
-for exports, remove it.
-
-Fixes: 89a23c8b528b ("ip6_tunnel: Fix missing tunnel encapsulation limit option")
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv6/exthdrs.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -729,13 +729,13 @@ void ipv6_push_nfrag_opts(struct sk_buff
- 	if (opt->hopopt)
- 		ipv6_push_exthdr(skb, proto, NEXTHDR_HOP, opt->hopopt);
- }
--EXPORT_SYMBOL(ipv6_push_nfrag_opts);
- 
- void ipv6_push_frag_opts(struct sk_buff *skb, struct ipv6_txoptions *opt, u8 *proto)
- {
- 	if (opt->dst1opt)
- 		ipv6_push_exthdr(skb, proto, NEXTHDR_DEST, opt->dst1opt);
- }
-+EXPORT_SYMBOL(ipv6_push_frag_opts);
- 
- struct ipv6_txoptions *
- ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *opt)
diff --git a/target/linux/generic/backport-4.9/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch b/target/linux/generic/backport-4.9/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
deleted file mode 100644
index 38ae076678..0000000000
--- a/target/linux/generic/backport-4.9/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 46bf067870156abd61fe24d14c2486d15b8b502c Mon Sep 17 00:00:00 2001
-From: Dave Taht <dave@taht.net>
-Date: Fri, 14 Dec 2018 18:38:40 +0000
-Subject: [PATCH 1/1] Allow class-e address assignment in ifconfig and early
- boot
-
-While the linux kernel became mostly "class-e clean" a decade ago,
-and most distributions long ago switched to the iproute2 suite
-of utilities, which allow class-e (240.0.0.0/4) address assignment,
-distributions relying on busybox, toybox and other forms of
-ifconfig cannot assign class-e addresses without this kernel patch.
-
-With this patch, also, a boot command line on these addresses is feasible:
-(ip=248.0.1.2::248.0.1.1:255.255.255.0).
-
-While CIDR has been obsolete for 2 decades, and a survey of all the
-userspace open source code in the world shows most IN_whatever macros
-are also obsolete... rather than obsolete CIDR from this ioctl entirely,
-this patch merely enables class-e assignment, sanely.
-
-H/T to Vince Fuller and his original patch here:
-    https://lkml.org/lkml/2008/1/7/370
-
-Signed-off-by: Dave Taht <dave.taht@gmail.com>
-Reviewed-by: John Gilmore <gnu@toad.com>
----
- include/uapi/linux/in.h | 8 ++++++--
- net/ipv4/devinet.c      | 4 +++-
- net/ipv4/ipconfig.c     | 2 ++
- 3 files changed, 11 insertions(+), 3 deletions(-)
-
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -266,8 +266,12 @@ struct sockaddr_in {
- #define	IN_MULTICAST(a)		IN_CLASSD(a)
- #define IN_MULTICAST_NET	0xF0000000
- 
--#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
--#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
-+#define	IN_BADCLASS(a)		(((long int) (a) ) == (long int)0xffffffff)
-+#define	IN_EXPERIMENTAL(a)	IN_BADCLASS((a))
-+
-+#define	IN_CLASSE(a)		((((long int) (a)) & 0xf0000000) == 0xf0000000)
-+#define	IN_CLASSE_NET		0xffffffff
-+#define	IN_CLASSE_NSHIFT	0
- 
- /* Address to accept any incoming messages. */
- #define	INADDR_ANY		((unsigned long int) 0x00000000)
---- a/net/ipv4/devinet.c
-+++ b/net/ipv4/devinet.c
-@@ -898,7 +898,7 @@ static int inet_abc_len(__be32 addr)
- {
- 	int rc = -1;	/* Something else, probably a multicast. */
- 
--	if (ipv4_is_zeronet(addr))
-+	if (ipv4_is_zeronet(addr) || ipv4_is_lbcast(addr))
- 		rc = 0;
- 	else {
- 		__u32 haddr = ntohl(addr);
-@@ -909,6 +909,8 @@ static int inet_abc_len(__be32 addr)
- 			rc = 16;
- 		else if (IN_CLASSC(haddr))
- 			rc = 24;
-+		else if (IN_CLASSE(haddr))
-+			rc = 32;
- 	}
- 
- 	return rc;
---- a/net/ipv4/ipconfig.c
-+++ b/net/ipv4/ipconfig.c
-@@ -455,6 +455,8 @@ static int __init ic_defaults(void)
- 			ic_netmask = htonl(IN_CLASSB_NET);
- 		else if (IN_CLASSC(ntohl(ic_myaddr)))
- 			ic_netmask = htonl(IN_CLASSC_NET);
-+		else if (IN_CLASSE(ntohl(ic_myaddr)))
-+			ic_netmask = htonl(IN_CLASSE_NET);
- 		else {
- 			pr_err("IP-Config: Unable to guess netmask for address %pI4\n",
- 			       &ic_myaddr);
diff --git a/target/linux/generic/backport-4.9/095-v4.13-0001-rtc-ds1307-add-ds1308-variant.patch b/target/linux/generic/backport-4.9/095-v4.13-0001-rtc-ds1307-add-ds1308-variant.patch
deleted file mode 100644
index 963466143c..0000000000
--- a/target/linux/generic/backport-4.9/095-v4.13-0001-rtc-ds1307-add-ds1308-variant.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 300a7735becf55f7fd18f8cd3dc3b945a0cab712 Mon Sep 17 00:00:00 2001
-From: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
-Date: Thu, 8 Jun 2017 12:36:54 +0200
-Subject: rtc: ds1307: add ds1308 variant
-
-The ds1308 variant is very similar to the already supported ds1338
-variant, it have more debug registers and a square wave clock output.
-
-Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
-Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
----
- drivers/rtc/rtc-ds1307.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/rtc/rtc-ds1307.c
-+++ b/drivers/rtc/rtc-ds1307.c
-@@ -31,6 +31,7 @@
-  */
- enum ds_type {
- 	ds_1307,
-+	ds_1308,
- 	ds_1337,
- 	ds_1338,
- 	ds_1339,
-@@ -144,6 +145,10 @@ static struct chip_desc chips[last_ds_ty
- 		.nvram_offset	= 8,
- 		.nvram_size	= 56,
- 	},
-+	[ds_1308] = {
-+		.nvram_offset	= 8,
-+		.nvram_size	= 56,
-+	},
- 	[ds_1337] = {
- 		.alarm		= 1,
- 	},
-@@ -175,6 +180,7 @@ static struct chip_desc chips[last_ds_ty
- 
- static const struct i2c_device_id ds1307_id[] = {
- 	{ "ds1307", ds_1307 },
-+	{ "ds1308", ds_1308 },
- 	{ "ds1337", ds_1337 },
- 	{ "ds1338", ds_1338 },
- 	{ "ds1339", ds_1339 },
-@@ -1488,6 +1494,7 @@ read_rtc:
- 			goto read_rtc;
- 		}
- 		break;
-+	case ds_1308:
- 	case ds_1338:
- 		/* clock halted?  turn it on, so clock can tick. */
- 		if (tmp & DS1307_BIT_CH)
diff --git a/target/linux/generic/backport-4.9/096-v4.20-netfilter-ipv6-Preserve-link-scope-traffic-original-.patch b/target/linux/generic/backport-4.9/096-v4.20-netfilter-ipv6-Preserve-link-scope-traffic-original-.patch
deleted file mode 100644
index bfb7690dec..0000000000
--- a/target/linux/generic/backport-4.9/096-v4.20-netfilter-ipv6-Preserve-link-scope-traffic-original-.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 508b09046c0f21678652fb66fd1e9959d55591d2 Mon Sep 17 00:00:00 2001
-From: Alin Nastac <alin.nastac@gmail.com>
-Date: Wed, 21 Nov 2018 14:00:30 +0100
-Subject: [PATCH] netfilter: ipv6: Preserve link scope traffic original oif
-
-When ip6_route_me_harder is invoked, it resets outgoing interface of:
-  - link-local scoped packets sent by neighbor discovery
-  - multicast packets sent by MLD host
-  - multicast packets send by MLD proxy daemon that sets outgoing
-    interface through IPV6_PKTINFO ipi6_ifindex
-
-Link-local and multicast packets must keep their original oif after
-ip6_route_me_harder is called.
-
-Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- net/ipv6/netfilter.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/net/ipv6/netfilter.c
-+++ b/net/ipv6/netfilter.c
-@@ -24,7 +24,8 @@ int ip6_route_me_harder(struct net *net,
- 	unsigned int hh_len;
- 	struct dst_entry *dst;
- 	struct flowi6 fl6 = {
--		.flowi6_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0,
-+		.flowi6_oif = skb->sk && skb->sk->sk_bound_dev_if ? skb->sk->sk_bound_dev_if :
-+			rt6_need_strict(&iph->daddr) ? skb_dst(skb)->dev->ifindex : 0,
- 		.flowi6_mark = skb->mark,
- 		.daddr = iph->daddr,
- 		.saddr = iph->saddr,
diff --git a/target/linux/generic/backport-4.9/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch b/target/linux/generic/backport-4.9/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
deleted file mode 100644
index 2b3384391a..0000000000
--- a/target/linux/generic/backport-4.9/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 4cc30de79d293f1e8c5f50ae3a9c005def9564a0 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Mon, 7 Jan 2019 14:14:27 +0100
-Subject: [PATCH 2/2] arm: cns3xxx: use actual size reads for PCIe
-
-commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
-reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(),
-which preserved the property of only doing 32-bit reads.
-
-It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
-so it changed writes from always being 32 bits to being the actual size,
-which works just fine.
-
-Due to:
-- The documentation does not mention that only 32 bit access is allowed.
-- Writes are already executed using the actual size
-- Extensive testing shows that 8b, 16b and 32b reads work as intended
-
-It makes perfectly sense to also swap 32 bit reading in favor of actual size.
-
-Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
-Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
-CC: Arnd Bergmann <arnd@arndb.de>
-CC: Krzysztof Halasa <khalasa@piap.pl>
-CC: Olof Johansson <olof@lixom.net>
-CC: Robin Leblon <robin.leblon@ncentric.com>
-CC: Rob Herring <robh@kernel.org>
-CC: Russell King <linux@armlinux.org.uk>
-CC: Tim Harvey <tharvey@gateworks.com>
-CC: stable@vger.kernel.org # v4.0+
----
- arch/arm/mach-cns3xxx/pcie.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -93,7 +93,7 @@ static int cns3xxx_pci_read_config(struc
- 	u32 mask = (0x1ull << (size * 8)) - 1;
- 	int shift = (where % 4) * 8;
- 
--	ret = pci_generic_config_read32(bus, devfn, where, size, val);
-+	ret = pci_generic_config_read(bus, devfn, where, size, val);
- 
- 	if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
- 	    (where & 0xffc) == PCI_CLASS_REVISION)
diff --git a/target/linux/generic/backport-4.9/400-v4.16-leds-trigger-Introduce-a-NETDEV-trigger.patch b/target/linux/generic/backport-4.9/400-v4.16-leds-trigger-Introduce-a-NETDEV-trigger.patch
deleted file mode 100644
index bd58df63c0..0000000000
--- a/target/linux/generic/backport-4.9/400-v4.16-leds-trigger-Introduce-a-NETDEV-trigger.patch
+++ /dev/null
@@ -1,588 +0,0 @@
-From 06f502f57d0d7728f9fa0f157ec5e4111ddb98f6 Mon Sep 17 00:00:00 2001
-From: Ben Whitten <ben.whitten@gmail.com>
-Date: Sun, 10 Dec 2017 21:17:55 +0000
-Subject: [PATCH] leds: trigger: Introduce a NETDEV trigger
-
-This commit introduces a NETDEV trigger for named device
-activity. Available triggers are link, rx, and tx.
-
-Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
-Acked-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
----
- .../ABI/testing/sysfs-class-led-trigger-netdev     |  45 ++
- drivers/leds/trigger/Kconfig                       |   7 +
- drivers/leds/trigger/Makefile                      |   1 +
- drivers/leds/trigger/ledtrig-netdev.c              | 496 +++++++++++++++++++++
- 4 files changed, 549 insertions(+)
- create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-netdev
- create mode 100644 drivers/leds/trigger/ledtrig-netdev.c
-
---- /dev/null
-+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
-@@ -0,0 +1,45 @@
-+What:		/sys/class/leds/<led>/device_name
-+Date:		Dec 2017
-+KernelVersion:	4.16
-+Contact:	linux-leds@vger.kernel.org
-+Description:
-+		Specifies the network device name to monitor.
-+
-+What:		/sys/class/leds/<led>/interval
-+Date:		Dec 2017
-+KernelVersion:	4.16
-+Contact:	linux-leds@vger.kernel.org
-+Description:
-+		Specifies the duration of the LED blink in milliseconds.
-+		Defaults to 50 ms.
-+
-+What:		/sys/class/leds/<led>/link
-+Date:		Dec 2017
-+KernelVersion:	4.16
-+Contact:	linux-leds@vger.kernel.org
-+Description:
-+		Signal the link state of the named network device.
-+		If set to 0 (default), the LED's normal state is off.
-+		If set to 1, the LED's normal state reflects the link state
-+		of the named network device.
-+		Setting this value also immediately changes the LED state.
-+
-+What:		/sys/class/leds/<led>/tx
-+Date:		Dec 2017
-+KernelVersion:	4.16
-+Contact:	linux-leds@vger.kernel.org
-+Description:
-+		Signal transmission of data on the named network device.
-+		If set to 0 (default), the LED will not blink on transmission.
-+		If set to 1, the LED will blink for the milliseconds specified
-+		in interval to signal transmission.
-+
-+What:		/sys/class/leds/<led>/rx
-+Date:		Dec 2017
-+KernelVersion:	4.16
-+Contact:	linux-leds@vger.kernel.org
-+Description:
-+		Signal reception of data on the named network device.
-+		If set to 0 (default), the LED will not blink on reception.
-+		If set to 1, the LED will blink for the milliseconds specified
-+		in interval to signal reception.
---- a/drivers/leds/trigger/Kconfig
-+++ b/drivers/leds/trigger/Kconfig
-@@ -126,4 +126,11 @@ config LEDS_TRIGGER_PANIC
- 	  a different trigger.
- 	  If unsure, say Y.
- 
-+config LEDS_TRIGGER_NETDEV
-+	tristate "LED Netdev Trigger"
-+	depends on NET && LEDS_TRIGGERS
-+	help
-+	  This allows LEDs to be controlled by network device activity.
-+	  If unsure, say Y.
-+
- endif # LEDS_TRIGGERS
---- a/drivers/leds/trigger/Makefile
-+++ b/drivers/leds/trigger/Makefile
-@@ -10,3 +10,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+=
- obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
- obj-$(CONFIG_LEDS_TRIGGER_CAMERA)	+= ledtrig-camera.o
- obj-$(CONFIG_LEDS_TRIGGER_PANIC)	+= ledtrig-panic.o
-+obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
---- /dev/null
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -0,0 +1,496 @@
-+// SPDX-License-Identifier: GPL-2.0
-+// Copyright 2017 Ben Whitten <ben.whitten@gmail.com>
-+// Copyright 2007 Oliver Jowett <oliver@opencloud.com>
-+//
-+// LED Kernel Netdev Trigger
-+//
-+// Toggles the LED to reflect the link and traffic state of a named net device
-+//
-+// Derived from ledtrig-timer.c which is:
-+//  Copyright 2005-2006 Openedhand Ltd.
-+//  Author: Richard Purdie <rpurdie@openedhand.com>
-+
-+#include <linux/atomic.h>
-+#include <linux/ctype.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/jiffies.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/netdevice.h>
-+#include <linux/spinlock.h>
-+#include <linux/timer.h>
-+#include "../leds.h"
-+
-+/*
-+ * Configurable sysfs attributes:
-+ *
-+ * device_name - network device name to monitor
-+ * interval - duration of LED blink, in milliseconds
-+ * link -  LED's normal state reflects whether the link is up
-+ *         (has carrier) or not
-+ * tx -  LED blinks on transmitted data
-+ * rx -  LED blinks on receive data
-+ *
-+ */
-+
-+struct led_netdev_data {
-+	spinlock_t lock;
-+
-+	struct delayed_work work;
-+	struct notifier_block notifier;
-+
-+	struct led_classdev *led_cdev;
-+	struct net_device *net_dev;
-+
-+	char device_name[IFNAMSIZ];
-+	atomic_t interval;
-+	unsigned int last_activity;
-+
-+	unsigned long mode;
-+#define NETDEV_LED_LINK	0
-+#define NETDEV_LED_TX	1
-+#define NETDEV_LED_RX	2
-+#define NETDEV_LED_MODE_LINKUP	3
-+};
-+
-+enum netdev_led_attr {
-+	NETDEV_ATTR_LINK,
-+	NETDEV_ATTR_TX,
-+	NETDEV_ATTR_RX
-+};
-+
-+static void set_baseline_state(struct led_netdev_data *trigger_data)
-+{
-+	int current_brightness;
-+	struct led_classdev *led_cdev = trigger_data->led_cdev;
-+
-+	current_brightness = led_cdev->brightness;
-+	if (current_brightness)
-+		led_cdev->blink_brightness = current_brightness;
-+	if (!led_cdev->blink_brightness)
-+		led_cdev->blink_brightness = led_cdev->max_brightness;
-+
-+	if (!test_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode))
-+		led_set_brightness(led_cdev, LED_OFF);
-+	else {
-+		if (test_bit(NETDEV_LED_LINK, &trigger_data->mode))
-+			led_set_brightness(led_cdev,
-+					   led_cdev->blink_brightness);
-+		else
-+			led_set_brightness(led_cdev, LED_OFF);
-+
-+		/* If we are looking for RX/TX start periodically
-+		 * checking stats
-+		 */
-+		if (test_bit(NETDEV_LED_TX, &trigger_data->mode) ||
-+		    test_bit(NETDEV_LED_RX, &trigger_data->mode))
-+			schedule_delayed_work(&trigger_data->work, 0);
-+	}
-+}
-+
-+static ssize_t device_name_show(struct device *dev,
-+				struct device_attribute *attr, char *buf)
-+{
-+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-+	ssize_t len;
-+
-+	spin_lock_bh(&trigger_data->lock);
-+	len = sprintf(buf, "%s\n", trigger_data->device_name);
-+	spin_unlock_bh(&trigger_data->lock);
-+
-+	return len;
-+}
-+
-+static ssize_t device_name_store(struct device *dev,
-+				 struct device_attribute *attr, const char *buf,
-+				 size_t size)
-+{
-+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-+
-+	if (size >= IFNAMSIZ)
-+		return -EINVAL;
-+
-+	cancel_delayed_work_sync(&trigger_data->work);
-+
-+	spin_lock_bh(&trigger_data->lock);
-+
-+	if (trigger_data->net_dev) {
-+		dev_put(trigger_data->net_dev);
-+		trigger_data->net_dev = NULL;
-+	}
-+
-+	strncpy(trigger_data->device_name, buf, size);
-+	if (size > 0 && trigger_data->device_name[size - 1] == '\n')
-+		trigger_data->device_name[size - 1] = 0;
-+
-+	if (trigger_data->device_name[0] != 0)
-+		trigger_data->net_dev =
-+		    dev_get_by_name(&init_net, trigger_data->device_name);
-+
-+	clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+	if (trigger_data->net_dev != NULL)
-+		if (netif_carrier_ok(trigger_data->net_dev))
-+			set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+
-+	trigger_data->last_activity = 0;
-+
-+	set_baseline_state(trigger_data);
-+	spin_unlock_bh(&trigger_data->lock);
-+
-+	return size;
-+}
-+
-+static DEVICE_ATTR_RW(device_name);
-+
-+static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
-+	enum netdev_led_attr attr)
-+{
-+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-+	int bit;
-+
-+	switch (attr) {
-+	case NETDEV_ATTR_LINK:
-+		bit = NETDEV_LED_LINK;
-+		break;
-+	case NETDEV_ATTR_TX:
-+		bit = NETDEV_LED_TX;
-+		break;
-+	case NETDEV_ATTR_RX:
-+		bit = NETDEV_LED_RX;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return sprintf(buf, "%u\n", test_bit(bit, &trigger_data->mode));
-+}
-+
-+static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
-+	size_t size, enum netdev_led_attr attr)
-+{
-+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-+	unsigned long state;
-+	int ret;
-+	int bit;
-+
-+	ret = kstrtoul(buf, 0, &state);
-+	if (ret)
-+		return ret;
-+
-+	switch (attr) {
-+	case NETDEV_ATTR_LINK:
-+		bit = NETDEV_LED_LINK;
-+		break;
-+	case NETDEV_ATTR_TX:
-+		bit = NETDEV_LED_TX;
-+		break;
-+	case NETDEV_ATTR_RX:
-+		bit = NETDEV_LED_RX;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	cancel_delayed_work_sync(&trigger_data->work);
-+
-+	if (state)
-+		set_bit(bit, &trigger_data->mode);
-+	else
-+		clear_bit(bit, &trigger_data->mode);
-+
-+	set_baseline_state(trigger_data);
-+
-+	return size;
-+}
-+
-+static ssize_t link_show(struct device *dev,
-+	struct device_attribute *attr, char *buf)
-+{
-+	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_LINK);
-+}
-+
-+static ssize_t link_store(struct device *dev,
-+	struct device_attribute *attr, const char *buf, size_t size)
-+{
-+	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_LINK);
-+}
-+
-+static DEVICE_ATTR_RW(link);
-+
-+static ssize_t tx_show(struct device *dev,
-+	struct device_attribute *attr, char *buf)
-+{
-+	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_TX);
-+}
-+
-+static ssize_t tx_store(struct device *dev,
-+	struct device_attribute *attr, const char *buf, size_t size)
-+{
-+	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_TX);
-+}
-+
-+static DEVICE_ATTR_RW(tx);
-+
-+static ssize_t rx_show(struct device *dev,
-+	struct device_attribute *attr, char *buf)
-+{
-+	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_RX);
-+}
-+
-+static ssize_t rx_store(struct device *dev,
-+	struct device_attribute *attr, const char *buf, size_t size)
-+{
-+	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_RX);
-+}
-+
-+static DEVICE_ATTR_RW(rx);
-+
-+static ssize_t interval_show(struct device *dev,
-+			     struct device_attribute *attr, char *buf)
-+{
-+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-+
-+	return sprintf(buf, "%u\n",
-+		       jiffies_to_msecs(atomic_read(&trigger_data->interval)));
-+}
-+
-+static ssize_t interval_store(struct device *dev,
-+			      struct device_attribute *attr, const char *buf,
-+			      size_t size)
-+{
-+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-+	unsigned long value;
-+	int ret;
-+
-+	ret = kstrtoul(buf, 0, &value);
-+	if (ret)
-+		return ret;
-+
-+	/* impose some basic bounds on the timer interval */
-+	if (value >= 5 && value <= 10000) {
-+		cancel_delayed_work_sync(&trigger_data->work);
-+
-+		atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
-+		set_baseline_state(trigger_data);	/* resets timer */
-+	}
-+
-+	return size;
-+}
-+
-+static DEVICE_ATTR_RW(interval);
-+
-+static int netdev_trig_notify(struct notifier_block *nb,
-+			      unsigned long evt, void *dv)
-+{
-+	struct net_device *dev =
-+		netdev_notifier_info_to_dev((struct netdev_notifier_info *)dv);
-+	struct led_netdev_data *trigger_data = container_of(nb,
-+							    struct
-+							    led_netdev_data,
-+							    notifier);
-+
-+	if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE
-+	    && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER
-+	    && evt != NETDEV_CHANGENAME)
-+		return NOTIFY_DONE;
-+
-+	if (strcmp(dev->name, trigger_data->device_name))
-+		return NOTIFY_DONE;
-+
-+	cancel_delayed_work_sync(&trigger_data->work);
-+
-+	spin_lock_bh(&trigger_data->lock);
-+
-+	clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+	switch (evt) {
-+	case NETDEV_REGISTER:
-+		if (trigger_data->net_dev)
-+			dev_put(trigger_data->net_dev);
-+		dev_hold(dev);
-+		trigger_data->net_dev = dev;
-+		break;
-+	case NETDEV_CHANGENAME:
-+	case NETDEV_UNREGISTER:
-+		if (trigger_data->net_dev) {
-+			dev_put(trigger_data->net_dev);
-+			trigger_data->net_dev = NULL;
-+		}
-+		break;
-+	case NETDEV_UP:
-+	case NETDEV_CHANGE:
-+		if (netif_carrier_ok(dev))
-+			set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+		break;
-+	}
-+
-+	set_baseline_state(trigger_data);
-+
-+	spin_unlock_bh(&trigger_data->lock);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+/* here's the real work! */
-+static void netdev_trig_work(struct work_struct *work)
-+{
-+	struct led_netdev_data *trigger_data = container_of(work,
-+							    struct
-+							    led_netdev_data,
-+							    work.work);
-+	struct rtnl_link_stats64 *dev_stats;
-+	unsigned int new_activity;
-+	struct rtnl_link_stats64 temp;
-+	unsigned long interval;
-+	int invert;
-+
-+	/* If we dont have a device, insure we are off */
-+	if (!trigger_data->net_dev) {
-+		led_set_brightness(trigger_data->led_cdev, LED_OFF);
-+		return;
-+	}
-+
-+	/* If we are not looking for RX/TX then return  */
-+	if (!test_bit(NETDEV_LED_TX, &trigger_data->mode) &&
-+	    !test_bit(NETDEV_LED_RX, &trigger_data->mode))
-+		return;
-+
-+	dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
-+	new_activity =
-+	    (test_bit(NETDEV_LED_TX, &trigger_data->mode) ?
-+		dev_stats->tx_packets : 0) +
-+	    (test_bit(NETDEV_LED_RX, &trigger_data->mode) ?
-+		dev_stats->rx_packets : 0);
-+
-+	if (trigger_data->last_activity != new_activity) {
-+		led_stop_software_blink(trigger_data->led_cdev);
-+
-+		invert = test_bit(NETDEV_LED_LINK, &trigger_data->mode);
-+		interval = jiffies_to_msecs(
-+				atomic_read(&trigger_data->interval));
-+		/* base state is ON (link present) */
-+		led_blink_set_oneshot(trigger_data->led_cdev,
-+				      &interval,
-+				      &interval,
-+				      invert);
-+		trigger_data->last_activity = new_activity;
-+	}
-+
-+	schedule_delayed_work(&trigger_data->work,
-+			(atomic_read(&trigger_data->interval)*2));
-+}
-+
-+static void netdev_trig_activate(struct led_classdev *led_cdev)
-+{
-+	struct led_netdev_data *trigger_data;
-+	int rc;
-+
-+	trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
-+	if (!trigger_data)
-+		return;
-+
-+	spin_lock_init(&trigger_data->lock);
-+
-+	trigger_data->notifier.notifier_call = netdev_trig_notify;
-+	trigger_data->notifier.priority = 10;
-+
-+	INIT_DELAYED_WORK(&trigger_data->work, netdev_trig_work);
-+
-+	trigger_data->led_cdev = led_cdev;
-+	trigger_data->net_dev = NULL;
-+	trigger_data->device_name[0] = 0;
-+
-+	trigger_data->mode = 0;
-+	atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
-+	trigger_data->last_activity = 0;
-+
-+	led_cdev->trigger_data = trigger_data;
-+
-+	rc = device_create_file(led_cdev->dev, &dev_attr_device_name);
-+	if (rc)
-+		goto err_out;
-+	rc = device_create_file(led_cdev->dev, &dev_attr_link);
-+	if (rc)
-+		goto err_out_device_name;
-+	rc = device_create_file(led_cdev->dev, &dev_attr_rx);
-+	if (rc)
-+		goto err_out_link;
-+	rc = device_create_file(led_cdev->dev, &dev_attr_tx);
-+	if (rc)
-+		goto err_out_rx;
-+	rc = device_create_file(led_cdev->dev, &dev_attr_interval);
-+	if (rc)
-+		goto err_out_tx;
-+	rc = register_netdevice_notifier(&trigger_data->notifier);
-+	if (rc)
-+		goto err_out_interval;
-+	return;
-+
-+err_out_interval:
-+	device_remove_file(led_cdev->dev, &dev_attr_interval);
-+err_out_tx:
-+	device_remove_file(led_cdev->dev, &dev_attr_tx);
-+err_out_rx:
-+	device_remove_file(led_cdev->dev, &dev_attr_rx);
-+err_out_link:
-+	device_remove_file(led_cdev->dev, &dev_attr_link);
-+err_out_device_name:
-+	device_remove_file(led_cdev->dev, &dev_attr_device_name);
-+err_out:
-+	led_cdev->trigger_data = NULL;
-+	kfree(trigger_data);
-+}
-+
-+static void netdev_trig_deactivate(struct led_classdev *led_cdev)
-+{
-+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-+
-+	if (trigger_data) {
-+		unregister_netdevice_notifier(&trigger_data->notifier);
-+
-+		device_remove_file(led_cdev->dev, &dev_attr_device_name);
-+		device_remove_file(led_cdev->dev, &dev_attr_link);
-+		device_remove_file(led_cdev->dev, &dev_attr_rx);
-+		device_remove_file(led_cdev->dev, &dev_attr_tx);
-+		device_remove_file(led_cdev->dev, &dev_attr_interval);
-+
-+		cancel_delayed_work_sync(&trigger_data->work);
-+
-+		if (trigger_data->net_dev)
-+			dev_put(trigger_data->net_dev);
-+
-+		kfree(trigger_data);
-+	}
-+}
-+
-+static struct led_trigger netdev_led_trigger = {
-+	.name = "netdev",
-+	.activate = netdev_trig_activate,
-+	.deactivate = netdev_trig_deactivate,
-+};
-+
-+static int __init netdev_trig_init(void)
-+{
-+	return led_trigger_register(&netdev_led_trigger);
-+}
-+
-+static void __exit netdev_trig_exit(void)
-+{
-+	led_trigger_unregister(&netdev_led_trigger);
-+}
-+
-+module_init(netdev_trig_init);
-+module_exit(netdev_trig_exit);
-+
-+MODULE_AUTHOR("Ben Whitten <ben.whitten@gmail.com>");
-+MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
-+MODULE_DESCRIPTION("Netdev LED trigger");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-4.9/400-v4.18-mtd-bcm47xxpart-add-of_match_table-with-a-new-DT-bin.patch b/target/linux/generic/backport-4.9/400-v4.18-mtd-bcm47xxpart-add-of_match_table-with-a-new-DT-bin.patch
deleted file mode 100644
index 94a4776751..0000000000
--- a/target/linux/generic/backport-4.9/400-v4.18-mtd-bcm47xxpart-add-of_match_table-with-a-new-DT-bin.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From cf589ce71e84d3b8811c65740645af254c5248c0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 9 May 2018 10:17:29 +0200
-Subject: [PATCH] mtd: bcm47xxpart: add of_match_table with a new DT binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows using bcm47xxpart parser to find partitions on flash
-described in DT using the "brcm,bcm947xx-cfe-partitions" compatible
-property. It means this parser doesn't have to be explicitly selected by
-a flash driver anymore. It can be used e.g. together with a generic
-m25p80 / spi-nor if device is just properly described.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/bcm47xxpart.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -15,6 +15,7 @@
- #include <linux/slab.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/mod_devicetable.h>
- 
- #include <uapi/linux/magic.h>
- 
-@@ -304,9 +305,16 @@ static int bcm47xxpart_parse(struct mtd_
- 	return curr_part;
- };
- 
-+static const struct of_device_id bcm47xxpart_of_match_table[] = {
-+	{ .compatible = "brcm,bcm947xx-cfe-partitions" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, bcm47xxpart_of_match_table);
-+
- static struct mtd_part_parser bcm47xxpart_mtd_parser = {
- 	.parse_fn = bcm47xxpart_parse,
- 	.name = "bcm47xxpart",
-+	.of_match_table = bcm47xxpart_of_match_table,
- };
- module_mtd_part_parser(bcm47xxpart_mtd_parser);
- 
diff --git a/target/linux/generic/backport-4.9/401-v4.19-mtd-parsers-trx-add-of_match_table-with-the-new-DT-b.patch b/target/linux/generic/backport-4.9/401-v4.19-mtd-parsers-trx-add-of_match_table-with-the-new-DT-b.patch
deleted file mode 100644
index b92382c1e9..0000000000
--- a/target/linux/generic/backport-4.9/401-v4.19-mtd-parsers-trx-add-of_match_table-with-the-new-DT-b.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 98534a58c8a40cdc9e3bcb04d74719fbcedfeb52 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 26 Jun 2018 00:05:08 +0200
-Subject: [PATCH] mtd: parsers: trx: add of_match_table with the new DT binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows using TRX parser to find TRX partitions on flash device
-described in DT using a proper binding. It's useful for devices storing
-firmware on a separated flash and having rootfs partition in it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/parsers/parser_trx.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -13,6 +13,7 @@
- #include <linux/slab.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/mod_devicetable.h>
- 
- #define TRX_PARSER_MAX_PARTS		4
- 
-@@ -116,9 +117,16 @@ static int parser_trx_parse(struct mtd_i
- 	return i;
- };
- 
-+static const struct of_device_id mtd_parser_trx_of_match_table[] = {
-+	{ .compatible = "brcm,trx" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, mtd_parser_trx_of_match_table);
-+
- static struct mtd_part_parser mtd_parser_trx = {
- 	.parse_fn = parser_trx_parse,
- 	.name = "trx",
-+	.of_match_table = mtd_parser_trx_of_match_table,
- };
- module_mtd_part_parser(mtd_parser_trx);
- 
diff --git a/target/linux/generic/backport-4.9/402-v4.19-mtd-partitions-use-DT-info-for-parsing-partitions-wi.patch b/target/linux/generic/backport-4.9/402-v4.19-mtd-partitions-use-DT-info-for-parsing-partitions-wi.patch
deleted file mode 100644
index 4186f5599f..0000000000
--- a/target/linux/generic/backport-4.9/402-v4.19-mtd-partitions-use-DT-info-for-parsing-partitions-wi.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 76a832254ab05502c9394cc51ded6f0abe0e0bee Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 13 Jul 2018 16:32:21 +0200
-Subject: [PATCH] mtd: partitions: use DT info for parsing partitions with
- "compatible" prop
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far only flash devices could be described in DT regarding partitions
-parsing. That could be done with "partitions" subnode and a proper
-"compatible" string.
-
-Some devices may use hierarchical (multi-level) layouts and may mix used
-layouts (fixed and dynamic). Describing that in DT is done by specifying
-"compatible" for DT-represented partition plus optionally more
-properties and/or subnodes.
-
-To support such layouts each DT partition has to be checked for
-additional description.
-
-Please note this implementation will work in parallel with support for
-partition type specified for non-DT setups. That already works since
-commit 1a0915be1926 ("mtd: partitions: add support for partition
-parsers").
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdpart.c | 33 +++++++++++++--------------------
- 1 file changed, 13 insertions(+), 20 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -370,22 +370,6 @@ static inline void free_partition(struct
- 	kfree(p);
- }
- 
--/**
-- * mtd_parse_part - parse MTD partition looking for subpartitions
-- *
-- * @slave: part that is supposed to be a container and should be parsed
-- * @types: NULL-terminated array with names of partition parsers to try
-- *
-- * Some partitions are kind of containers with extra subpartitions (volumes).
-- * There can be various formats of such containers. This function tries to use
-- * specified parsers to analyze given partition and registers found
-- * subpartitions on success.
-- */
--static int mtd_parse_part(struct mtd_part *slave, const char *const *types)
--{
--	return parse_mtd_partitions(&slave->mtd, types, NULL);
--}
--
- static struct mtd_part *allocate_partition(struct mtd_info *parent,
- 			const struct mtd_partition *part, int partno,
- 			uint64_t cur_offset)
-@@ -775,8 +759,8 @@ int add_mtd_partitions(struct mtd_info *
- 
- 		add_mtd_device(&slave->mtd);
- 		mtd_add_partition_attrs(slave);
--		if (parts[i].types)
--			mtd_parse_part(slave, parts[i].types);
-+		/* Look for subpartitions */
-+		parse_mtd_partitions(&slave->mtd, parts[i].types, NULL);
- 
- 		cur_offset = slave->offset + slave->mtd.size;
- 	}
-@@ -852,6 +836,12 @@ static const char * const default_mtd_pa
- 	NULL
- };
- 
-+/* Check DT only when looking for subpartitions. */
-+static const char * const default_subpartition_types[] = {
-+	"ofpart",
-+	NULL
-+};
-+
- static int mtd_part_do_parse(struct mtd_part_parser *parser,
- 			     struct mtd_info *master,
- 			     struct mtd_partitions *pparts,
-@@ -922,7 +912,9 @@ static int mtd_part_of_parse(struct mtd_
- 	const char *fixed = "fixed-partitions";
- 	int ret, err = 0;
- 
--	np = of_get_child_by_name(mtd_get_of_node(master), "partitions");
-+	np = mtd_get_of_node(master);
-+	if (!mtd_is_partition(master))
-+		np = of_get_child_by_name(np, "partitions");
- 	of_property_for_each_string(np, "compatible", prop, compat) {
- 		parser = mtd_part_get_compatible_parser(compat);
- 		if (!parser)
-@@ -985,7 +977,8 @@ int parse_mtd_partitions(struct mtd_info
- 	int ret, err = 0;
- 
- 	if (!types)
--		types = default_mtd_part_types;
-+		types = mtd_is_partition(master) ? default_subpartition_types :
-+			default_mtd_part_types;
- 
- 	for ( ; *types; types++) {
- 		/*
diff --git a/target/linux/generic/config-4.19 b/target/linux/generic/config-4.19
deleted file mode 100644
index a2d7988c6e..0000000000
--- a/target/linux/generic/config-4.19
+++ /dev/null
@@ -1,6078 +0,0 @@
-# CONFIG_104_QUAD_8 is not set
-CONFIG_32BIT=y
-# CONFIG_6LOWPAN is not set
-# CONFIG_6LOWPAN_DEBUGFS is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB8500_CORE is not set
-# CONFIG_ABP060MG is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACERHDF is not set
-# CONFIG_ACER_WIRELESS is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_ALS is not set
-# CONFIG_ACPI_APEI is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_CONFIGFS is not set
-# CONFIG_ACPI_CUSTOM_METHOD is not set
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_HED is not set
-# CONFIG_ACPI_NFIT is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_ACPI_TABLE_UPGRADE is not set
-# CONFIG_ACPI_VIDEO is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_AD5272 is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5592R is not set
-# CONFIG_AD5593R is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5686_SPI is not set
-# CONFIG_AD5696_I2C is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5758 is not set
-# CONFIG_AD5761 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7266 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7303 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7766 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD8366 is not set
-# CONFIG_AD8801 is not set
-# CONFIG_AD9523 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADE7753 is not set
-# CONFIG_ADE7754 is not set
-# CONFIG_ADE7758 is not set
-# CONFIG_ADE7759 is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADF4350 is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADIS16060 is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16204 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16220 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_ADJD_S311 is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ADT7316 is not set
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_ADXL345_I2C is not set
-# CONFIG_ADXL345_SPI is not set
-# CONFIG_ADXRS450 is not set
-CONFIG_AEABI=y
-# CONFIG_AFE4403 is not set
-# CONFIG_AFE4404 is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_KCM is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AF_RXRPC_INJECT_LOSS is not set
-# CONFIG_AF_RXRPC_IPV6 is not set
-# CONFIG_AGP is not set
-# CONFIG_AHCI_CEVA is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_AHCI_MVEBU is not set
-# CONFIG_AHCI_QORIQ is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIX_PARTITION is not set
-# CONFIG_AK09911 is not set
-# CONFIG_AK8974 is not set
-# CONFIG_AK8975 is not set
-# CONFIG_AL3320A is not set
-# CONFIG_ALIM7101_WDT is not set
-CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_ALTERA_MBOX is not set
-# CONFIG_ALTERA_MSGDMA is not set
-# CONFIG_ALTERA_STAPL is not set
-# CONFIG_ALTERA_TSE is not set
-# CONFIG_ALX is not set
-# CONFIG_AM2315 is not set
-# CONFIG_AM335X_PHY_USB is not set
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMD_MEM_ENCRYPT is not set
-# CONFIG_AMD_PHY is not set
-# CONFIG_AMD_XGBE is not set
-# CONFIG_AMD_XGBE_HAVE_ECC is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_AMILO_RFKILL is not set
-# CONFIG_ANDROID is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APDS9300 is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_APDS9960 is not set
-# CONFIG_APM8018X is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_APPLE_GMUX is not set
-# CONFIG_APPLE_PROPERTIES is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AQTION is not set
-# CONFIG_AQUANTIA_PHY is not set
-# CONFIG_AR5523 is not set
-# CONFIG_AR7 is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR8216_PHY_LEDS is not set
-# CONFIG_ARCH_ACTIONS is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_ARTPEC is not set
-# CONFIG_ARCH_ASPEED is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM_21664 is not set
-# CONFIG_ARCH_BCM_23550 is not set
-# CONFIG_ARCH_BCM_281XX is not set
-# CONFIG_ARCH_BCM_5301X is not set
-# CONFIG_ARCH_BCM_53573 is not set
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_CYGNUS is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BCM_NSP is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGICOLOR is not set
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_EXYNOS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_K3 is not set
-# CONFIG_ARCH_KEYSTONE is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_MMAP_RND_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_BITS_MIN=8
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MULTIPLATFORM is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NPCM is not set
-# CONFIG_ARCH_NSPIRE is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP2PLUS is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_OXNAS is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_REALTEK is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SHMOBILE_MULTI is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_STM32 is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_SYNQUACER is not set
-# CONFIG_ARCH_TANGO is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_THUNDER2 is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VIRT is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_VULCAN is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_WANTS_THP_SWAP is not set
-# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
-# CONFIG_ARCH_WM8505 is not set
-# CONFIG_ARCH_WM8750 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARC_EMAC is not set
-# CONFIG_ARC_IRQ_NO_AUTOSAVE is not set
-# CONFIG_ARM64_ERRATUM_1024718 is not set
-# CONFIG_ARM64_ERRATUM_819472 is not set
-# CONFIG_ARM64_ERRATUM_824069 is not set
-# CONFIG_ARM64_ERRATUM_826319 is not set
-# CONFIG_ARM64_ERRATUM_827319 is not set
-# CONFIG_ARM64_ERRATUM_832075 is not set
-# CONFIG_ARM64_ERRATUM_834220 is not set
-# CONFIG_ARM64_ERRATUM_843419 is not set
-# CONFIG_ARM64_ERRATUM_845719 is not set
-# CONFIG_ARM64_ERRATUM_858921 is not set
-# CONFIG_ARM64_RAS_EXTN is not set
-# CONFIG_ARM64_RELOC_TEST is not set
-CONFIG_ARM64_SW_TTBR0_PAN=y
-# CONFIG_ARM_APPENDED_DTB is not set
-# CONFIG_ARM_ARCH_TIMER is not set
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_ARM_CCI400_PMU is not set
-# CONFIG_ARM_CCI5xx_PMU is not set
-# CONFIG_ARM_CCI_PMU is not set
-# CONFIG_ARM_CCN is not set
-# CONFIG_ARM_CPUIDLE is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-# CONFIG_ARM_CRYPTO is not set
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_DSU_PMU is not set
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_ARM_ERRATA_754327 is not set
-# CONFIG_ARM_ERRATA_764369 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-# CONFIG_ARM_ERRATA_775420 is not set
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_818325_852422 is not set
-# CONFIG_ARM_ERRATA_821420 is not set
-# CONFIG_ARM_ERRATA_825619 is not set
-# CONFIG_ARM_ERRATA_852421 is not set
-# CONFIG_ARM_ERRATA_852423 is not set
-CONFIG_ARM_GIC_MAX_NR=1
-# CONFIG_ARM_KERNMEM_PERMS is not set
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-# CONFIG_ARM_MHU is not set
-# CONFIG_ARM_MODULE_PLTS is not set
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-# CONFIG_ARM_PSCI is not set
-# CONFIG_ARM_PSCI_CHECKER is not set
-# CONFIG_ARM_PTDUMP is not set
-# CONFIG_ARM_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM_SBSA_WATCHDOG is not set
-# CONFIG_ARM_SCPI_PROTOCOL is not set
-# CONFIG_ARM_SDE_INTERFACE is not set
-# CONFIG_ARM_SPE_PMU is not set
-# CONFIG_ARM_TIMER_SP804 is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_ARM_VIRT_EXT is not set
-# CONFIG_AS3935 is not set
-# CONFIG_ASIX_PHY is not set
-# CONFIG_ASM9260_TIMER is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_ASUS_WIRELESS is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_AT91_SAMA5D2_ADC is not set
-# CONFIG_ATA is not set
-# CONFIG_ATAGS is not set
-CONFIG_ATAGS_PROC=y
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-CONFIG_ATA_BMDMA=y
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH10K is not set
-# CONFIG_ATH25 is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH6KL is not set
-# CONFIG_ATH79 is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATLAS_PH_SENSOR is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATMEL_PIT is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ATP is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
-# CONFIG_AURORA_NB8800 is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTO_ZRELADDR is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_AXP20X_ADC is not set
-# CONFIG_AXP20X_POWER is not set
-# CONFIG_AXP288_ADC is not set
-# CONFIG_AXP288_FUEL_GAUGE is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-# CONFIG_BACKLIGHT_ARCXCNN is not set
-# CONFIG_BACKLIGHT_BD6107 is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_BACKLIGHT_GPIO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKLIGHT_LM3630A is not set
-# CONFIG_BACKLIGHT_LM3639 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_BACKLIGHT_LV5207LP is not set
-# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_PM8941_WLED is not set
-# CONFIG_BACKLIGHT_PWM is not set
-# CONFIG_BACKLIGHT_RPI is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27XXX is not set
-# CONFIG_BATTERY_BQ27XXX_HDQ is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_GAUGE_LTC2941 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
-# CONFIG_BATTERY_LEGO_EV3 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_MAX1721X is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCACHE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_BCM7038_WDT is not set
-# CONFIG_BCM7XXX_PHY is not set
-# CONFIG_BCM87XX_PHY is not set
-# CONFIG_BCMA is not set
-# CONFIG_BCMA_DRIVER_GPIO is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BCMGENET is not set
-# CONFIG_BCM_IPROC_ADC is not set
-# CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_BCM_SBA_RAID is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BE2NET is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BGMAC is not set
-# CONFIG_BH1750 is not set
-# CONFIG_BH1780 is not set
-# CONFIG_BIG_KEYS is not set
-# CONFIG_BIG_LITTLE is not set
-# CONFIG_BINARY_PRINTF is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_FDPIC is not set
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BINFMT_SCRIPT=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_CMDLINE_PARSER is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_DEBUG_FS is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_NULL_BLK is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_PMEM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_BLK_DEV_RSXX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SKD is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_THROTTLING is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_ZONED is not set
-# CONFIG_BLK_SED_OPAL is not set
-# CONFIG_BLK_WBT is not set
-CONFIG_BLOCK=y
-# CONFIG_BMA180 is not set
-# CONFIG_BMA220 is not set
-# CONFIG_BMC150_ACCEL is not set
-# CONFIG_BMC150_MAGN is not set
-# CONFIG_BMC150_MAGN_I2C is not set
-# CONFIG_BMC150_MAGN_SPI is not set
-# CONFIG_BME680 is not set
-# CONFIG_BMG160 is not set
-# CONFIG_BMI160_I2C is not set
-# CONFIG_BMI160_SPI is not set
-# CONFIG_BMIPS_GENERIC is not set
-# CONFIG_BMP085 is not set
-# CONFIG_BMP085_I2C is not set
-# CONFIG_BMP085_SPI is not set
-# CONFIG_BMP280 is not set
-# CONFIG_BNA is not set
-# CONFIG_BNX2 is not set
-# CONFIG_BNX2X is not set
-# CONFIG_BNXT is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOKE_WDT is not set
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOOT_RAW=y
-CONFIG_BPF=y
-# CONFIG_BPFILTER is not set
-CONFIG_BPF_JIT=y
-# CONFIG_BPF_JIT_ALWAYS_ON is not set
-# CONFIG_BPF_STREAM_PARSER is not set
-CONFIG_BPF_SYSCALL=y
-# CONFIG_BPQETHER is not set
-CONFIG_BQL=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMSMAC is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_BRIDGE_VLAN_FILTERING=y
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_ASSERT is not set
-# CONFIG_BTRFS_DEBUG is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS_REF_VERIFY is not set
-# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_BREDR is not set
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
-# CONFIG_BT_HCIBTUSB_RTL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_3WIRE is not set
-# CONFIG_BT_HCIUART_AG6XX is not set
-# CONFIG_BT_HCIUART_ATH3K is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUART_MRVL is not set
-# CONFIG_BT_HCIUART_QCA is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-# CONFIG_BT_LEDS is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_SELFTEST is not set
-CONFIG_BUG=y
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-CONFIG_BUILDTIME_EXTABLE_SORT=y
-# CONFIG_BUILD_BIN2C is not set
-CONFIG_BUILD_SALT=""
-# CONFIG_C2PORT is not set
-CONFIG_CACHE_L2X0_PMU=y
-# CONFIG_CADENCE_WATCHDOG is not set
-# CONFIG_CAIF is not set
-# CONFIG_CAN is not set
-# CONFIG_CAN_BCM is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_GS_USB is not set
-# CONFIG_CAN_GW is not set
-# CONFIG_CAN_HI311X is not set
-# CONFIG_CAN_IFI_CANFD is not set
-# CONFIG_CAN_MCBA_USB is not set
-# CONFIG_CAN_M_CAN is not set
-# CONFIG_CAN_PEAK_PCIEFD is not set
-# CONFIG_CAN_RAW is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_RCAR_CANFD is not set
-# CONFIG_CAN_SLCAN is not set
-# CONFIG_CAN_SUN4I is not set
-# CONFIG_CAN_UCAN is not set
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_VXCAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CARL9170 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CAVIUM_CPT is not set
-# CONFIG_CAVIUM_ERRATUM_22375 is not set
-# CONFIG_CAVIUM_ERRATUM_23144 is not set
-# CONFIG_CAVIUM_ERRATUM_23154 is not set
-# CONFIG_CAVIUM_ERRATUM_27456 is not set
-# CONFIG_CAVIUM_ERRATUM_30115 is not set
-# CONFIG_CAVIUM_OCTEON_SOC is not set
-# CONFIG_CAVIUM_PTP is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC10001_ADC is not set
-# CONFIG_CCS811 is not set
-CONFIG_CC_HAS_SANCOV_TRACE_PC=y
-CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
-CONFIG_CC_IS_GCC=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CGROUP_BPF is not set
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NET_CLASSID is not set
-# CONFIG_CGROUP_NET_PRIO is not set
-# CONFIG_CGROUP_RDMA is not set
-# CONFIG_CHARGER_ADP5061 is not set
-# CONFIG_CHARGER_BQ2415X is not set
-# CONFIG_CHARGER_BQ24190 is not set
-# CONFIG_CHARGER_BQ24257 is not set
-# CONFIG_CHARGER_BQ24735 is not set
-# CONFIG_CHARGER_BQ25890 is not set
-# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_LTC3651 is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_RT9455 is not set
-# CONFIG_CHARGER_SBS is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-# CONFIG_CHASH_SELFTEST is not set
-# CONFIG_CHASH_STATS is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_CHROME_PLATFORMS is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_ACL is not set
-CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
-# CONFIG_CIFS_DEBUG is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_FSCACHE is not set
-# CONFIG_CIFS_NFSD_EXPORT is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_SMB2 is not set
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIO_DAC is not set
-CONFIG_CLANG_VERSION=0
-# CONFIG_CLEANCACHE is not set
-# CONFIG_CLKSRC_VERSATILE is not set
-# CONFIG_CLK_HSDK is not set
-# CONFIG_CLK_QORIQ is not set
-# CONFIG_CLOCK_THERMAL is not set
-CONFIG_CLS_U32_MARK=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CM32181 is not set
-# CONFIG_CM3232 is not set
-# CONFIG_CM3323 is not set
-# CONFIG_CM3605 is not set
-# CONFIG_CM36651 is not set
-# CONFIG_CMA is not set
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_CMDLINE_PARTITION is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMMON_CLK_CDCE706 is not set
-# CONFIG_COMMON_CLK_CDCE925 is not set
-# CONFIG_COMMON_CLK_CS2000_CP is not set
-# CONFIG_COMMON_CLK_IPROC is not set
-# CONFIG_COMMON_CLK_MAX9485 is not set
-# CONFIG_COMMON_CLK_NXP is not set
-# CONFIG_COMMON_CLK_PIC32 is not set
-# CONFIG_COMMON_CLK_PWM is not set
-# CONFIG_COMMON_CLK_PXA is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_COMMON_CLK_SI514 is not set
-# CONFIG_COMMON_CLK_SI5351 is not set
-# CONFIG_COMMON_CLK_SI544 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_VC5 is not set
-# CONFIG_COMMON_CLK_VERSATILE is not set
-# CONFIG_COMMON_CLK_XGENE is not set
-# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
-CONFIG_COMPACTION=y
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_COMPAT is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_COMPILE_TEST is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONFIG_KVM_AMD_SEV is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
-CONFIG_CONSOLE_LOGLEVEL_QUIET=4
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_COPS is not set
-# CONFIG_CORDIC is not set
-# CONFIG_COREDUMP is not set
-# CONFIG_CORESIGHT is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CORTINA_PHY is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CPU_IDLE_GOV_MENU is not set
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_ISOLATION is not set
-# CONFIG_CPU_NO_EFFICIENT_FFS is not set
-CONFIG_CPU_SW_DOMAIN_PAN=y
-# CONFIG_CRAMFS is not set
-CONFIG_CRAMFS_BLOCKDEV=y
-# CONFIG_CRAMFS_MTD is not set
-CONFIG_CRASHLOG=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_BIT is not set
-CONFIG_CRC32_SARWATE=y
-# CONFIG_CRC32_SELFTEST is not set
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SLICEBY8 is not set
-# CONFIG_CRC4 is not set
-# CONFIG_CRC64 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_CRC8 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSS_COMPILE=""
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_842 is not set
-# CONFIG_CRYPTO_AEAD is not set
-# CONFIG_CRYPTO_AEGIS128 is not set
-# CONFIG_CRYPTO_AEGIS128L is not set
-# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS256 is not set
-# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_AES_ARM is not set
-# CONFIG_CRYPTO_AES_ARM_BS is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-# CONFIG_CRYPTO_AES_TI is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CFB is not set
-# CONFIG_CRYPTO_CHACHA20 is not set
-# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_CMAC is not set
-# CONFIG_CRYPTO_CRC32 is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
-# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
-# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
-# CONFIG_CRYPTO_DEV_CCP is not set
-# CONFIG_CRYPTO_DEV_CCREE is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_HISI_SEC is not set
-# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
-# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_MXC_SCC is not set
-# CONFIG_CRYPTO_DEV_MXS_DCP is not set
-# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
-# CONFIG_CRYPTO_DEV_QAT_C62X is not set
-# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
-# CONFIG_CRYPTO_DEV_QCE is not set
-# CONFIG_CRYPTO_DEV_S5P is not set
-# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
-# CONFIG_CRYPTO_DEV_SAHARA is not set
-# CONFIG_CRYPTO_DEV_SP_PSP is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_CRYPTO_DEV_VIRTIO is not set
-# CONFIG_CRYPTO_DH is not set
-# CONFIG_CRYPTO_DRBG_CTR is not set
-# CONFIG_CRYPTO_DRBG_HASH is not set
-# CONFIG_CRYPTO_DRBG_MENU is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_ECDH is not set
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-# CONFIG_CRYPTO_HASH is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_JITTERENTROPY is not set
-# CONFIG_CRYPTO_KEYWRAP is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZ4 is not set
-# CONFIG_CRYPTO_LZ4HC is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_MCRYPTD is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_MORUS1280 is not set
-# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
-# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
-# CONFIG_CRYPTO_MORUS640 is not set
-# CONFIG_CRYPTO_MORUS640_SSE2 is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-CONFIG_CRYPTO_PCRYPT=y
-# CONFIG_CRYPTO_POLY1305 is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_ARM is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA3 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_SM3 is not set
-# CONFIG_CRYPTO_SM4 is not set
-# CONFIG_CRYPTO_SPECK is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_USER is not set
-# CONFIG_CRYPTO_USER_API_AEAD is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_RNG is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_ZSTD is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_CUSE is not set
-# CONFIG_CW1200 is not set
-# CONFIG_CXL_AFU_DRIVER_OPS is not set
-# CONFIG_CXL_BASE is not set
-# CONFIG_CXL_EEH is not set
-# CONFIG_CXL_KERNEL_API is not set
-# CONFIG_CXL_LIB is not set
-# CONFIG_CYPRESS_FIRMWARE is not set
-# CONFIG_DA280 is not set
-# CONFIG_DA311 is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DAX is not set
-# CONFIG_DCB is not set
-# CONFIG_DDR is not set
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_DWARF4 is not set
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_DEBUG_INFO_SPLIT is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_KOBJECT_RELEASE is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PAGE_REF is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA_TEST is not set
-# CONFIG_DEBUG_RSEQ is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
-# CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_WX is not set
-# CONFIG_DEBUG_ZBOOT is not set
-# CONFIG_DECNET is not set
-CONFIG_DEFAULT_CUBIC=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
-# CONFIG_DELL_LAPTOP is not set
-# CONFIG_DELL_RBTN is not set
-# CONFIG_DELL_SMBIOS is not set
-# CONFIG_DELL_SMO8800 is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_DEVMEM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DEV_DAX is not set
-# CONFIG_DGAP is not set
-# CONFIG_DGNC is not set
-# CONFIG_DHT11 is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
-# CONFIG_DISPLAY_CONNECTOR_DVI is not set
-# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
-# CONFIG_DISPLAY_ENCODER_TFP410 is not set
-# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
-# CONFIG_DISPLAY_PANEL_DPI is not set
-# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMARD06 is not set
-# CONFIG_DMARD09 is not set
-# CONFIG_DMARD10 is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMA_FENCE_TRACE is not set
-# CONFIG_DMA_NOOP_OPS is not set
-# CONFIG_DMA_SHARED_BUFFER is not set
-# CONFIG_DMA_VIRT_OPS is not set
-# CONFIG_DM_CACHE is not set
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_ERA is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_INTEGRITY is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DM_LOG_WRITES is not set
-# CONFIG_DM_MQ_DEFAULT is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_SWITCH is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_UNSTRIPED is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_DM_WRITECACHE is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_DP83822_PHY is not set
-# CONFIG_DP83848_PHY is not set
-# CONFIG_DP83867_PHY is not set
-# CONFIG_DP83TC811_PHY is not set
-# CONFIG_DPOT_DAC is not set
-CONFIG_DQL=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_AMDGPU_CIK is not set
-# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-# CONFIG_DRM_AMDGPU_SI is not set
-# CONFIG_DRM_AMDGPU_USERPTR is not set
-# CONFIG_DRM_AMD_ACP is not set
-# CONFIG_DRM_ANALOGIX_ANX78XX is not set
-# CONFIG_DRM_ARCPGU is not set
-# CONFIG_DRM_ARMADA is not set
-# CONFIG_DRM_AST is not set
-# CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_CDNS_DSI is not set
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_DEBUG_MM is not set
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-# CONFIG_DRM_DP_AUX_CHARDEV is not set
-# CONFIG_DRM_DP_CEC is not set
-# CONFIG_DRM_DUMB_VGA_DAC is not set
-# CONFIG_DRM_DW_HDMI_CEC is not set
-# CONFIG_DRM_ETNAVIV is not set
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_FBDEV_EMULATION is not set
-# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
-# CONFIG_DRM_FSL_DCU is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_HDLCD is not set
-# CONFIG_DRM_HISI_HIBMC is not set
-# CONFIG_DRM_HISI_KIRIN is not set
-# CONFIG_DRM_I2C_ADV7511 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_I915 is not set
-# CONFIG_DRM_LEGACY is not set
-# CONFIG_DRM_LIB_RANDOM is not set
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_LVDS_ENCODER is not set
-# CONFIG_DRM_MALI_DISPLAY is not set
-# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_MXSFB is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_NXP_PTN3460 is not set
-# CONFIG_DRM_OMAP is not set
-# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
-# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
-# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
-# CONFIG_DRM_PANEL_LG_LG4573 is not set
-# CONFIG_DRM_PANEL_LVDS is not set
-# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
-# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
-# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
-# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
-# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
-# CONFIG_DRM_PARADE_PS8622 is not set
-# CONFIG_DRM_PL111 is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_RADEON_USERPTR is not set
-# CONFIG_DRM_RCAR_DW_HDMI is not set
-# CONFIG_DRM_RCAR_LVDS is not set
-# CONFIG_DRM_SII902X is not set
-# CONFIG_DRM_SII9234 is not set
-# CONFIG_DRM_SIL_SII8620 is not set
-# CONFIG_DRM_STI is not set
-# CONFIG_DRM_STM is not set
-# CONFIG_DRM_SUN4I is not set
-# CONFIG_DRM_THINE_THC63LVD1024 is not set
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_TINYDRM is not set
-# CONFIG_DRM_TI_TFP410 is not set
-# CONFIG_DRM_TOSHIBA_TC358767 is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_VBOXVIDEO is not set
-# CONFIG_DRM_VGEM is not set
-# CONFIG_DRM_VIRTIO_GPU is not set
-# CONFIG_DRM_VKMS is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_DRM_XEN is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DS1803 is not set
-# CONFIG_DS4424 is not set
-# CONFIG_DST_CACHE is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-CONFIG_DUMMY_CONSOLE_COLUMNS=80
-CONFIG_DUMMY_CONSOLE_ROWS=25
-# CONFIG_DUMMY_IRQ is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_DWC_XLGMAC is not set
-# CONFIG_DWMAC_IPQ806X is not set
-# CONFIG_DWMAC_LPC18XX is not set
-# CONFIG_DWMAC_MESON is not set
-# CONFIG_DWMAC_ROCKCHIP is not set
-# CONFIG_DWMAC_SOCFPGA is not set
-# CONFIG_DWMAC_STI is not set
-# CONFIG_DW_AXI_DMAC is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_DW_WATCHDOG is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_HWTS is not set
-# CONFIG_EARLY_PRINTK_8250 is not set
-# CONFIG_EARLY_PRINTK_USB_XDBC is not set
-# CONFIG_EBC_C384_WDT is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
-# CONFIG_EEPROM_IDT_89HPESX is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EFI is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_EFS_FS is not set
-CONFIG_ELFCORE=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EMBEDDED=y
-# CONFIG_EM_TIMER_STI is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENA_ETHERNET is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_ENCX24J600 is not set
-# CONFIG_ENIC is not set
-# CONFIG_ENVELOPE_DETECTOR is not set
-# CONFIG_EPAPR_PARAVIRT is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_EROFS_FS is not set
-# CONFIG_ET131X is not set
-CONFIG_ETHERNET=y
-# CONFIG_ETHOC is not set
-CONFIG_EVENTFD=y
-CONFIG_EXPERT=y
-CONFIG_EXPORTFS=y
-# CONFIG_EXPORTFS_BLOCK_OPS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_ENCRYPTION is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_EXT4_USE_FOR_EXT2=y
-# CONFIG_EXTCON is not set
-# CONFIG_EXTCON_ADC_JACK is not set
-# CONFIG_EXTCON_AXP288 is not set
-# CONFIG_EXTCON_GPIO is not set
-# CONFIG_EXTCON_INTEL_INT3496 is not set
-# CONFIG_EXTCON_MAX3355 is not set
-# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
-# CONFIG_EXTCON_RT8973A is not set
-# CONFIG_EXTCON_SM5502 is not set
-# CONFIG_EXTCON_USB_GPIO is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_F2FS_FAULT_INJECTION is not set
-# CONFIG_F2FS_FS is not set
-# CONFIG_F2FS_FS_ENCRYPTION is not set
-# CONFIG_F2FS_FS_POSIX_ACL is not set
-# CONFIG_F2FS_IO_TRACE is not set
-# CONFIG_FAILOVER is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_FANOTIFY is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_DEFAULT_UTF8 is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BOTH_ENDIAN is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DA8XX is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_FLEX is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_IMX is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_MXS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-CONFIG_FB_NOTIFY=y
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_OPENCORES is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIMPLE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SM712 is not set
-# CONFIG_FB_SM750 is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_SSD1307 is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TFT is not set
-# CONFIG_FB_TFT_AGM1264K_FL is not set
-# CONFIG_FB_TFT_BD663474 is not set
-# CONFIG_FB_TFT_FBTFT_DEVICE is not set
-# CONFIG_FB_TFT_HX8340BN is not set
-# CONFIG_FB_TFT_HX8347D is not set
-# CONFIG_FB_TFT_HX8353D is not set
-# CONFIG_FB_TFT_HX8357D is not set
-# CONFIG_FB_TFT_ILI9163 is not set
-# CONFIG_FB_TFT_ILI9320 is not set
-# CONFIG_FB_TFT_ILI9325 is not set
-# CONFIG_FB_TFT_ILI9340 is not set
-# CONFIG_FB_TFT_ILI9341 is not set
-# CONFIG_FB_TFT_ILI9481 is not set
-# CONFIG_FB_TFT_ILI9486 is not set
-# CONFIG_FB_TFT_PCD8544 is not set
-# CONFIG_FB_TFT_RA8875 is not set
-# CONFIG_FB_TFT_S6D02A1 is not set
-# CONFIG_FB_TFT_S6D1121 is not set
-# CONFIG_FB_TFT_SH1106 is not set
-# CONFIG_FB_TFT_SSD1289 is not set
-# CONFIG_FB_TFT_SSD1305 is not set
-# CONFIG_FB_TFT_SSD1306 is not set
-# CONFIG_FB_TFT_SSD1325 is not set
-# CONFIG_FB_TFT_SSD1331 is not set
-# CONFIG_FB_TFT_SSD1351 is not set
-# CONFIG_FB_TFT_ST7735R is not set
-# CONFIG_FB_TFT_ST7789V is not set
-# CONFIG_FB_TFT_TINYLCD is not set
-# CONFIG_FB_TFT_TLS8204 is not set
-# CONFIG_FB_TFT_UC1611 is not set
-# CONFIG_FB_TFT_UC1701 is not set
-# CONFIG_FB_TFT_UPD161704 is not set
-# CONFIG_FB_TFT_WATTEROTT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_FENCE_TRACE is not set
-# CONFIG_FHANDLE is not set
-CONFIG_FIB_RULES=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIND_BIT_BENCHMARK is not set
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FM10K is not set
-# CONFIG_FMC is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_FORTIFY_SOURCE=y
-# CONFIG_FPGA is not set
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FRONTSWAP is not set
-# CONFIG_FSCACHE is not set
-# CONFIG_FSI is not set
-# CONFIG_FSL_EDMA is not set
-# CONFIG_FSL_ERRATUM_A008585 is not set
-# CONFIG_FSL_MC_BUS is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_DAX is not set
-# CONFIG_FS_ENCRYPTION is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FTGMAC100 is not set
-# CONFIG_FTL is not set
-# CONFIG_FTMAC100 is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_FTWDT010_WATCHDOG is not set
-# CONFIG_FUJITSU_ES is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_FUJITSU_TABLET is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-CONFIG_FUTEX_PI=y
-# CONFIG_FW_CFG_SYSFS is not set
-CONFIG_FW_LOADER=y
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_GACT_PROB=y
-# CONFIG_GADGET_UAC1 is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_GATEWORKS_GW16083 is not set
-# CONFIG_GCC_PLUGINS is not set
-CONFIG_GCC_VERSION=70400
-# CONFIG_GCOV is not set
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_GDB_SCRIPTS is not set
-# CONFIG_GEMINI_ETHERNET is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
-# CONFIG_GENERIC_ADC_THERMAL is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_IRQ_DEBUGFS is not set
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_NET_UTILS=y
-# CONFIG_GENERIC_PHY is not set
-# CONFIG_GENEVE is not set
-# CONFIG_GENWQE is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_DUMMYLL is not set
-# CONFIG_GLOB_SELFTEST is not set
-# CONFIG_GNSS is not set
-# CONFIG_GOLDFISH is not set
-# CONFIG_GOOGLE_FIRMWARE is not set
-# CONFIG_GP2AP020A00F is not set
-# CONFIG_GPD_POCKET_FAN is not set
-# CONFIG_GPIOLIB is not set
-CONFIG_GPIOLIB_FASTPATH_LIMIT=512
-# CONFIG_GPIO_104_DIO_48E is not set
-# CONFIG_GPIO_104_IDIO_16 is not set
-# CONFIG_GPIO_104_IDI_48 is not set
-# CONFIG_GPIO_74X164 is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_ALTERA is not set
-# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_AMDPT is not set
-# CONFIG_GPIO_BCM_KONA is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DWAPB is not set
-# CONFIG_GPIO_EM is not set
-# CONFIG_GPIO_EXAR is not set
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_FTGPIO010 is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_GPIO_MM is not set
-# CONFIG_GPIO_GRGPIO is not set
-# CONFIG_GPIO_HLWD is not set
-# CONFIG_GPIO_ICH is not set
-# CONFIG_GPIO_IT87 is not set
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_MAX3191X is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MB86S7X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_MOCKUP is not set
-# CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_PCH is not set
-# CONFIG_GPIO_PCIE_IDIO_24 is not set
-# CONFIG_GPIO_PCI_IDIO_16 is not set
-# CONFIG_GPIO_PISOSR is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_RDC321X is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SCH311X is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SYSCON is not set
-# CONFIG_GPIO_SYSFS is not set
-# CONFIG_GPIO_TPIC2810 is not set
-# CONFIG_GPIO_TS4900 is not set
-# CONFIG_GPIO_TS5500 is not set
-# CONFIG_GPIO_VX855 is not set
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_GPIO_WINBOND is not set
-# CONFIG_GPIO_WS16C48 is not set
-# CONFIG_GPIO_XGENE is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_XRA1403 is not set
-# CONFIG_GPIO_ZEVIO is not set
-# CONFIG_GPIO_ZX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GREYBUS is not set
-# CONFIG_GS_FPGABOOT is not set
-# CONFIG_GTP is not set
-# CONFIG_GUP_BENCHMARK is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_HAPPYMEAL is not set
-CONFIG_HARDENED_USERCOPY=y
-# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
-# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
-CONFIG_HARDEN_EL2_VECTORS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
-# CONFIG_HAVE_ARCH_HASH is not set
-CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
-# CONFIG_HAVE_ARCH_VMAP_STACK is not set
-CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
-# CONFIG_HAVE_ARM_ARCH_TIMER is not set
-CONFIG_HAVE_EXIT_THREAD=y
-CONFIG_HAVE_GCC_PLUGINS=y
-CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_CAT=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_NMI=y
-CONFIG_HAVE_STACKPROTECTOR=y
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDC100X is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDMI_LPE_AUDIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFS_FS_POSIX_ACL is not set
-# CONFIG_HI8435 is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACCUTOUCH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_ALPS is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_APPLEIR is not set
-# CONFIG_HID_ASUS is not set
-# CONFIG_HID_AUREAL is not set
-# CONFIG_HID_BATTERY_STRENGTH is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BETOP_FF is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CMEDIA is not set
-# CONFIG_HID_CORSAIR is not set
-# CONFIG_HID_COUGAR is not set
-# CONFIG_HID_CP2112 is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_ELAN is not set
-# CONFIG_HID_ELECOM is not set
-# CONFIG_HID_ELO is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GEMBIRD is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_HID_GFRM is not set
-# CONFIG_HID_GOOGLE_HAMMER is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GT683R is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_ICADE is not set
-# CONFIG_HID_ITE is not set
-# CONFIG_HID_JABRA is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LED is not set
-# CONFIG_HID_LENOVO is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_LOGITECH_DJ is not set
-# CONFIG_HID_LOGITECH_HIDPP is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MAYFLASH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NTI is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PENMOUNT is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_PLANTRONICS is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_REDRAGON is not set
-# CONFIG_HID_RETRODE is not set
-# CONFIG_HID_RMI is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SENSOR_HUB is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_STEAM is not set
-# CONFIG_HID_STEELSERIES is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_THINGM is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_UDRAW_PS3 is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_WIIMOTE is not set
-# CONFIG_HID_XINMO is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HINIC is not set
-# CONFIG_HIP04_ETH is not set
-# CONFIG_HIPPI is not set
-# CONFIG_HISILICON_ERRATUM_161010101 is not set
-# CONFIG_HISILICON_ERRATUM_161600802 is not set
-# CONFIG_HISI_FEMAC is not set
-# CONFIG_HIX5HD2_GMAC is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_HNS is not set
-# CONFIG_HNS3 is not set
-# CONFIG_HNS_DSAF is not set
-# CONFIG_HNS_ENET is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP03 is not set
-# CONFIG_HP100 is not set
-# CONFIG_HP206C is not set
-CONFIG_HPET_MMAP_DEFAULT=y
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HP_WIRELESS is not set
-# CONFIG_HSI is not set
-# CONFIG_HSR is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTS221 is not set
-# CONFIG_HTU21 is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWLAT_TRACER is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWSPINLOCK is not set
-# CONFIG_HWSPINLOCK_OMAP is not set
-CONFIG_HW_PERF_EVENTS=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_CAVIUM is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
-# CONFIG_HW_RANDOM_OMAP is not set
-# CONFIG_HW_RANDOM_OMAP3_ROM is not set
-# CONFIG_HW_RANDOM_PPC4XX is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_TPM=y
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HW_RANDOM_VIRTIO is not set
-# CONFIG_HX711 is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYPERV_TSCPAGE is not set
-# CONFIG_HYSDN is not set
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_200 is not set
-# CONFIG_HZ_24 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_500 is not set
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-# CONFIG_I2C_AU1550 is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_BCM_IPROC is not set
-# CONFIG_I2C_CADENCE is not set
-# CONFIG_I2C_CBUS_GPIO is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEMUX_PINCTRL is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_EMEV2 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_HID is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_IMG is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_ISMT is not set
-# CONFIG_I2C_MLXCPLD is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_MUX_GPIO is not set
-# CONFIG_I2C_MUX_GPMUX is not set
-# CONFIG_I2C_MUX_LTC4306 is not set
-# CONFIG_I2C_MUX_MLXCPLD is not set
-# CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
-# CONFIG_I2C_MUX_PINCTRL is not set
-# CONFIG_I2C_MUX_REG is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OCTEON is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_I2C_RK3X is not set
-# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
-# CONFIG_I2C_S3C2410 is not set
-# CONFIG_I2C_SCMI is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SLAVE is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_THUNDERX is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VERSATILE is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I40E is not set
-# CONFIG_I40EVF is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IAQCORE is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_EMAC_DEBUG is not set
-# CONFIG_IBM_EMAC_EMAC4 is not set
-# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_EMAC_RGMII is not set
-# CONFIG_IBM_EMAC_TAH is not set
-# CONFIG_IBM_EMAC_ZMII is not set
-# CONFIG_ICE is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEAPAD_LAPTOP is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDLE_PAGE_TRACKING is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IEEE802154_ADF7242 is not set
-# CONFIG_IEEE802154_ATUSB is not set
-# CONFIG_IEEE802154_CA8210 is not set
-# CONFIG_IEEE802154_HWSIM is not set
-# CONFIG_IEEE802154_MCR20A is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IIO is not set
-# CONFIG_IIO_BUFFER_CB is not set
-# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
-# CONFIG_IIO_CONFIGFS is not set
-CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
-# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
-# CONFIG_IIO_INTERRUPT_TRIGGER is not set
-# CONFIG_IIO_MUX is not set
-# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_RESCALE is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_SSP_SENSORHUB is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_IIO_ST_LSM6DSX is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_IIO_ST_PRESS is not set
-# CONFIG_IIO_SW_DEVICE is not set
-# CONFIG_IIO_SW_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-# CONFIG_IMGPDC_WDT is not set
-# CONFIG_IMG_MDC_DMA is not set
-# CONFIG_IMX7D_ADC is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_INA2XX_ADC is not set
-# CONFIG_INDIRECT_PIO is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_UDP_DIAG is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_AXP20X_PEK is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_LEDS is not set
-# CONFIG_INPUT_MATRIXKMAP is not set
-# CONFIG_INPUT_MAX8997_HAPTIC is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_PWM_VIBRA is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INT340X_THERMAL is not set
-# CONFIG_INTEL_ATOMISP2_PM is not set
-# CONFIG_INTEL_CHT_INT33FE is not set
-# CONFIG_INTEL_HID_EVENT is not set
-# CONFIG_INTEL_IDLE is not set
-# CONFIG_INTEL_IDMA64 is not set
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_INTEL_ISH_HID is not set
-# CONFIG_INTEL_MEI is not set
-# CONFIG_INTEL_MEI_ME is not set
-# CONFIG_INTEL_MEI_TXE is not set
-# CONFIG_INTEL_MIC_CARD is not set
-# CONFIG_INTEL_MIC_HOST is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_INTEL_OAKTRAIL is not set
-# CONFIG_INTEL_PMC_CORE is not set
-# CONFIG_INTEL_PUNIT_IPC is not set
-# CONFIG_INTEL_RST is not set
-# CONFIG_INTEL_SMARTCONNECT is not set
-# CONFIG_INTEL_SOC_PMIC is not set
-# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
-# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
-# CONFIG_INTEL_TH is not set
-# CONFIG_INTEL_VBTN is not set
-# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_INV_MPU6050_I2C is not set
-# CONFIG_INV_MPU6050_IIO is not set
-# CONFIG_INV_MPU6050_SPI is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_IOSCHED_BFQ is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IO_STRICT_DEVMEM=y
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_SRH is not set
-# CONFIG_IP6_NF_NAT is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
-# CONFIG_IPACK_BUS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_FOU is not set
-# CONFIG_IPV6_FOU_TUNNEL is not set
-# CONFIG_IPV6_ILA is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_SEG6_HMAC is not set
-# CONFIG_IPV6_SEG6_LWTUNNEL is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_VTI is not set
-# CONFIG_IPVLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_FIB_TRIE_STATS is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_SYNPROXY is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_SET is not set
-# CONFIG_IP_SET_HASH_IPMAC is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IP_VS_MH is not set
-CONFIG_IP_VS_MH_TAB_INDEX=10
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_IRQ_POLL is not set
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_IR_GPIO_CIR is not set
-# CONFIG_IR_HIX5HD2 is not set
-# CONFIG_IR_IGORPLUGUSB is not set
-# CONFIG_IR_IGUANA is not set
-# CONFIG_IR_IMG is not set
-# CONFIG_IR_IMON is not set
-# CONFIG_IR_JVC_DECODER is not set
-# CONFIG_IR_LIRC_CODEC is not set
-# CONFIG_IR_MCEUSB is not set
-# CONFIG_IR_NEC_DECODER is not set
-# CONFIG_IR_RC5_DECODER is not set
-# CONFIG_IR_RC6_DECODER is not set
-# CONFIG_IR_REDRAT3 is not set
-# CONFIG_IR_SONY_DECODER is not set
-# CONFIG_IR_STREAMZAP is not set
-# CONFIG_IR_TTUSBIR is not set
-# CONFIG_ISA_BUS is not set
-# CONFIG_ISA_BUS_API is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_ISL29125 is not set
-# CONFIG_ISL29501 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ISS4xx is not set
-# CONFIG_ITG3200 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IXGB is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_JAILHOUSE_GUEST is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_JSA1212 is not set
-# CONFIG_JUMP_LABEL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_BASE_RELATIVE=y
-# CONFIG_KALLSYMS_UNCOMPRESSED is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KASAN is not set
-# CONFIG_KCOV is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_CAT is not set
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_LZ4 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KERNEL_XZ=y
-CONFIG_KERNFS=y
-# CONFIG_KEXEC is not set
-# CONFIG_KEXEC_FILE is not set
-# CONFIG_KEYBOARD_ADC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_BCM is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_DLINK_DIR685 is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
-# CONFIG_KEYBOARD_STMPE is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_TEGRA is not set
-# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KEY_DH_OPERATIONS is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KMX61 is not set
-# CONFIG_KPROBES is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_KS7010 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-CONFIG_KUSER_HELPERS=y
-# CONFIG_KVM_AMD is not set
-# CONFIG_KVM_GUEST is not set
-# CONFIG_KVM_INTEL is not set
-# CONFIG_KXCJK1013 is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_L2TP is not set
-# CONFIG_L2TP_ETH is not set
-# CONFIG_L2TP_IP is not set
-# CONFIG_L2TP_V3 is not set
-# CONFIG_LAN743X is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LANTIQ is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-CONFIG_LBDAF=y
-# CONFIG_LCD_AMS369FG06 is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_ILI922X is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LMS501KF03 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_OTM3225A is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LDISC_AUTOLOAD=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
-# CONFIG_LEDS_APU is not set
-# CONFIG_LEDS_BCM6328 is not set
-# CONFIG_LEDS_BCM6358 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_BLINKM is not set
-CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_CLASS_FLASH is not set
-# CONFIG_LEDS_CR0014114 is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_IS31FL319X is not set
-# CONFIG_LEDS_IS31FL32XX is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_LM355x is not set
-# CONFIG_LEDS_LM3642 is not set
-# CONFIG_LEDS_LM3692X is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP3952 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_LP5562 is not set
-# CONFIG_LEDS_LP8501 is not set
-# CONFIG_LEDS_LP8860 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_MLXCPLD is not set
-# CONFIG_LEDS_MLXREG is not set
-# CONFIG_LEDS_NIC78BX is not set
-# CONFIG_LEDS_NS2 is not set
-# CONFIG_LEDS_OT200 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA963X is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SYSCON is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_TLC591XX is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_CAMERA is not set
-# CONFIG_LEDS_TRIGGER_CPU is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_DISK is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_MTD is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-# CONFIG_LEDS_TRIGGER_ONESHOT is not set
-# CONFIG_LEDS_TRIGGER_PANIC is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
-# CONFIG_LEDS_USER is not set
-# CONFIG_LED_TRIGGER_PHY is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LGUEST is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LIBNVDIMM is not set
-# CONFIG_LIDAR_LITE_V2 is not set
-# CONFIG_LIQUIDIO is not set
-# CONFIG_LIQUIDIO_VF is not set
-# CONFIG_LIS3L02DQ is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_LMP91000 is not set
-# CONFIG_LNET is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIWHEELS_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
-# CONFIG_LOONGSON_MC146818 is not set
-# CONFIG_LPC_ICH is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_LTC2471 is not set
-# CONFIG_LTC2485 is not set
-# CONFIG_LTC2497 is not set
-# CONFIG_LTC2632 is not set
-# CONFIG_LTE_GDM724X is not set
-# CONFIG_LTPC is not set
-# CONFIG_LTR501 is not set
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_LV0104CS is not set
-# CONFIG_LWTUNNEL is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_LZ4HC_COMPRESS is not set
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_LZO_COMPRESS is not set
-# CONFIG_LZO_DECOMPRESS is not set
-# CONFIG_M62332 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
-# CONFIG_MACB is not set
-# CONFIG_MACH_ASM9260 is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
-# CONFIG_MACH_PIC32 is not set
-# CONFIG_MACH_PISTACHIO is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MACH_XILFPGA is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACSEC is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MAG3110 is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-# CONFIG_MAGIC_SYSRQ_SERIAL is not set
-# CONFIG_MAILBOX is not set
-# CONFIG_MANAGER_SBS is not set
-# CONFIG_MANDATORY_FILE_LOCKING is not set
-# CONFIG_MANGLE_BOOTARGS is not set
-# CONFIG_MARVELL_10G_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX1027 is not set
-# CONFIG_MAX11100 is not set
-# CONFIG_MAX1118 is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX30100 is not set
-# CONFIG_MAX30102 is not set
-# CONFIG_MAX44000 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MAX5481 is not set
-# CONFIG_MAX5487 is not set
-# CONFIG_MAX5821 is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MAX9611 is not set
-# CONFIG_MAXIM_THERMOCOUPLE is not set
-CONFIG_MAY_USE_DEVLINK=y
-# CONFIG_MC3230 is not set
-# CONFIG_MCB is not set
-# CONFIG_MCP320X is not set
-# CONFIG_MCP3422 is not set
-# CONFIG_MCP4018 is not set
-# CONFIG_MCP4131 is not set
-# CONFIG_MCP4531 is not set
-# CONFIG_MCP4725 is not set
-# CONFIG_MCP4922 is not set
-# CONFIG_MCPM is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MDIO_DEVICE is not set
-# CONFIG_MDIO_HISI_FEMAC is not set
-# CONFIG_MDIO_MSCC_MIIM is not set
-# CONFIG_MDIO_OCTEON is not set
-# CONFIG_MDIO_THUNDER is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_CAMERA_SUPPORT is not set
-# CONFIG_MEDIA_CEC_SUPPORT is not set
-# CONFIG_MEDIA_CONTROLLER is not set
-# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
-# CONFIG_MEDIA_PCI_SUPPORT is not set
-# CONFIG_MEDIA_RADIO_SUPPORT is not set
-# CONFIG_MEDIA_RC_SUPPORT is not set
-# CONFIG_MEDIA_SDR_SUPPORT is not set
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_USB_SUPPORT is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_MELLANOX_PLATFORM is not set
-CONFIG_MEMBARRIER=y
-# CONFIG_MEMORY is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MEN_A21_WDT is not set
-# CONFIG_MESON_SM is not set
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_ACT8945A is not set
-# CONFIG_MFD_ARIZONA_I2C is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_MFD_AS3722 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-# CONFIG_MFD_ATMEL_HLCDC is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_BCM590XX is not set
-# CONFIG_MFD_BD9571MWV is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_CPCAP is not set
-# CONFIG_MFD_CROS_EC is not set
-# CONFIG_MFD_CS5535 is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_DA9062 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_DA9150 is not set
-# CONFIG_MFD_DLN2 is not set
-# CONFIG_MFD_EXYNOS_LPASS is not set
-# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_KEMPLD is not set
-# CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_LP3943 is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MADERA is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77620 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX77843 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC13XXX_I2C is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_MENF21BMC is not set
-# CONFIG_MFD_MT6397 is not set
-# CONFIG_MFD_OMAP_USB_HOST is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_PM8XXX is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_RETU is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_RN5T618 is not set
-# CONFIG_MFD_ROHM_BD718XX is not set
-# CONFIG_MFD_RT5033 is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_RTSX_USB is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SI476X_CORE is not set
-# CONFIG_MFD_SKY81452 is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TI_AM335X_TSCADC is not set
-# CONFIG_MFD_TI_LMU is not set
-# CONFIG_MFD_TI_LP873X is not set
-# CONFIG_MFD_TI_LP87565 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TPS65086 is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS65218 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_MFD_TPS68470 is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_MFD_VIPERBOARD is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MICROCHIP_KSZ is not set
-# CONFIG_MICROCHIP_PHY is not set
-# CONFIG_MICROCHIP_T1_PHY is not set
-# CONFIG_MICROSEMI_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_CDMM is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_FPU_EMULATOR is not set
-# CONFIG_MIPS_GENERIC is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MIPS_PARAVIRT is not set
-# CONFIG_MIPS_PLATFORM_DEVICES is not set
-# CONFIG_MIPS_SEAD3 is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISC_RTSX_PCI is not set
-# CONFIG_MISC_RTSX_USB is not set
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-# CONFIG_MKISS is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX90614 is not set
-# CONFIG_MLX90632 is not set
-# CONFIG_MLXFW is not set
-# CONFIG_MLXSW_CORE is not set
-# CONFIG_MLX_CPLD_PLATFORM is not set
-# CONFIG_MLX_PLATFORM is not set
-# CONFIG_MMA7455_I2C is not set
-# CONFIG_MMA7455_SPI is not set
-# CONFIG_MMA7660 is not set
-# CONFIG_MMA8452 is not set
-# CONFIG_MMA9551 is not set
-# CONFIG_MMA9553 is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC35240 is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_AU1X is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_MMC_BLOCK_MINORS=8
-# CONFIG_MMC_CAVIUM_THUNDERX is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_CQHCI is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_MTK is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_BCM_KONA is not set
-# CONFIG_MMC_SDHCI_CADENCE is not set
-# CONFIG_MMC_SDHCI_F_SDH30 is not set
-# CONFIG_MMC_SDHCI_IPROC is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHCI_OF_ARASAN is not set
-# CONFIG_MMC_SDHCI_OF_AT91 is not set
-# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-# CONFIG_MMC_SDHCI_OMAP is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDHCI_S3C is not set
-# CONFIG_MMC_SDHCI_XENON is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_TOSHIBA_PCI is not set
-# CONFIG_MMC_USDHI6ROL0 is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_MMU=y
-CONFIG_MODULES=y
-# CONFIG_MODULE_COMPRESS is not set
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SIG is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_STRIPPED=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOST is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_FOCALTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_MPL115 is not set
-# CONFIG_MPL115_I2C is not set
-# CONFIG_MPL115_SPI is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_MPLS is not set
-# CONFIG_MPU3050_I2C is not set
-# CONFIG_MQ_IOSCHED_DEADLINE is not set
-# CONFIG_MQ_IOSCHED_KYBER is not set
-# CONFIG_MS5611 is not set
-# CONFIG_MS5637 is not set
-# CONFIG_MSCC_OCELOT_SWITCH is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_MSI_LAPTOP is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LATCH_ADDR is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MCHP23K256 is not set
-# CONFIG_MTD_MT81xx_NOR is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_AMS_DELTA is not set
-# CONFIG_MTD_NAND_AR934X is not set
-# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
-# CONFIG_MTD_NAND_ATMEL is not set
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_BCH is not set
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_BRCMNAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_CM_X270 is not set
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DAVINCI is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_DENALI_DT is not set
-# CONFIG_MTD_NAND_DENALI_PCI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_ECC is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_NAND_FSMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_GPMI_NAND is not set
-# CONFIG_MTD_NAND_HISI504 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_JZ4740 is not set
-# CONFIG_MTD_NAND_MPC5121_NFC is not set
-# CONFIG_MTD_NAND_MTK is not set
-# CONFIG_MTD_NAND_MXC is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_NDFC is not set
-# CONFIG_MTD_NAND_NUC900 is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
-# CONFIG_MTD_NAND_ORION is not set
-# CONFIG_MTD_NAND_PASEMI is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_RB4XX is not set
-# CONFIG_MTD_NAND_RB750 is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_S3C2410 is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_NAND_SOCRATES is not set
-# CONFIG_MTD_NAND_TMIO is not set
-# CONFIG_MTD_NAND_TXX9NDFMC is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_PARTITIONED_MASTER is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_MTD_SPI_NAND is not set
-# CONFIG_MTD_SPI_NOR is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
-CONFIG_MTD_SPLIT=y
-# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
-# CONFIG_MTD_SPLIT_FIT_FW is not set
-# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_MINOR_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_SUPPORT=y
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_TRX_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SWAP is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UIMAGE_SPLIT is not set
-# CONFIG_MTD_VIRT_CONCAT is not set
-# CONFIG_MTK_MMC is not set
-CONFIG_MULTIUSER=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVMDIO is not set
-# CONFIG_MVNETA_BM is not set
-# CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MVSWITCH_PHY is not set
-# CONFIG_MV_XOR_V2 is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MXC4005 is not set
-# CONFIG_MXC6255 is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NAU7802 is not set
-# CONFIG_NBPFAXI_DMA is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2000 is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVSIM is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_INGRESS is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_OSF is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_BPF is not set
-# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETLINK_DIAG is not set
-# CONFIG_NETLINK_MMAP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_BPF is not set
-# CONFIG_NET_ACT_CSUM is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IFE is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SAMPLE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_ACT_SKBMOD is not set
-# CONFIG_NET_ACT_TUNNEL_KEY is not set
-# CONFIG_NET_ACT_VLAN is not set
-CONFIG_NET_CADENCE=y
-# CONFIG_NET_CALXEDA_XGMAC is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_BPF is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FLOWER is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_MATCHALL is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CORE=y
-# CONFIG_NET_DEVLINK is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_LEGACY is not set
-# CONFIG_NET_DSA_LOOP is not set
-# CONFIG_NET_DSA_MT7530 is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_QCA8K is not set
-# CONFIG_NET_DSA_REALTEK_SMI is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CANID is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_IPT is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_FAILOVER is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NET_FOU is not set
-# CONFIG_NET_FOU_IP_TUNNELS is not set
-# CONFIG_NET_IFE is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPVTI is not set
-# CONFIG_NET_IP_TUNNEL is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-# CONFIG_NET_L3_MASTER_DEV is not set
-# CONFIG_NET_MPLS_GSO is not set
-# CONFIG_NET_NCSI is not set
-# CONFIG_NET_NSH is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NET_PTP_CLASSIFY is not set
-CONFIG_NET_RX_BUSY_POLL=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CAKE is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CBS is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_CODEL is not set
-# CONFIG_NET_SCH_DEFAULT is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_ETF is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_FQ is not set
-CONFIG_NET_SCH_FQ_CODEL=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HHF is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PIE is not set
-# CONFIG_NET_SCH_PLUG is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_SKBPRIO is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_NET_SWITCHDEV is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_TEAM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_UDP_TUNNEL is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NET_VENDOR_ADAPTEC=y
-CONFIG_NET_VENDOR_AGERE=y
-CONFIG_NET_VENDOR_ALACRITECH=y
-CONFIG_NET_VENDOR_ALTEON=y
-CONFIG_NET_VENDOR_AMAZON=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_AQUANTIA=y
-CONFIG_NET_VENDOR_ARC=y
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_NET_VENDOR_AURORA=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_BROCADE=y
-CONFIG_NET_VENDOR_CADENCE=y
-CONFIG_NET_VENDOR_CAVIUM=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_CISCO=y
-CONFIG_NET_VENDOR_CORTINA=y
-CONFIG_NET_VENDOR_DEC=y
-CONFIG_NET_VENDOR_DLINK=y
-CONFIG_NET_VENDOR_EMULEX=y
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_NET_VENDOR_EZCHIP=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_NET_VENDOR_FUJITSU=y
-CONFIG_NET_VENDOR_HISILICON=y
-CONFIG_NET_VENDOR_HP=y
-CONFIG_NET_VENDOR_HUAWEI=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_NET_VENDOR_INTEL=y
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_MICROSEMI=y
-CONFIG_NET_VENDOR_MYRI=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_NETERION=y
-CONFIG_NET_VENDOR_NETRONOME=y
-CONFIG_NET_VENDOR_NI=y
-CONFIG_NET_VENDOR_NVIDIA=y
-CONFIG_NET_VENDOR_OKI=y
-CONFIG_NET_VENDOR_PACKET_ENGINES=y
-CONFIG_NET_VENDOR_QLOGIC=y
-CONFIG_NET_VENDOR_QUALCOMM=y
-CONFIG_NET_VENDOR_RDC=y
-CONFIG_NET_VENDOR_REALTEK=y
-CONFIG_NET_VENDOR_RENESAS=y
-CONFIG_NET_VENDOR_ROCKER=y
-CONFIG_NET_VENDOR_SAMSUNG=y
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SILAN=y
-CONFIG_NET_VENDOR_SIS=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_SOCIONEXT=y
-CONFIG_NET_VENDOR_SOLARFLARE=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_SUN=y
-CONFIG_NET_VENDOR_SYNOPSYS=y
-CONFIG_NET_VENDOR_TEHUTI=y
-CONFIG_NET_VENDOR_TI=y
-CONFIG_NET_VENDOR_TOSHIBA=y
-CONFIG_NET_VENDOR_VIA=y
-CONFIG_NET_VENDOR_WIZNET=y
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_NET_VENDOR_XIRCOM=y
-# CONFIG_NET_VRF is not set
-# CONFIG_NET_XGENE is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFC is not set
-# CONFIG_NFP is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_FSCACHE is not set
-# CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V2 is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NFT_BRIDGE_META is not set
-# CONFIG_NFT_BRIDGE_REJECT is not set
-# CONFIG_NFT_CONNLIMIT is not set
-# CONFIG_NFT_DUP_IPV4 is not set
-# CONFIG_NFT_DUP_IPV6 is not set
-# CONFIG_NFT_FIB_IPV4 is not set
-# CONFIG_NFT_FIB_IPV6 is not set
-# CONFIG_NFT_FIB_NETDEV is not set
-# CONFIG_NFT_FLOW_OFFLOAD is not set
-# CONFIG_NFT_OBJREF is not set
-# CONFIG_NFT_OSF is not set
-# CONFIG_NFT_RT is not set
-# CONFIG_NFT_SET_BITMAP is not set
-# CONFIG_NFT_SOCKET is not set
-# CONFIG_NFT_TPROXY is not set
-# CONFIG_NFT_TUNNEL is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_LABELS is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROCFS=y
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CONNTRACK_ZONES is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_DUP_IPV4 is not set
-# CONFIG_NF_DUP_IPV6 is not set
-# CONFIG_NF_FLOW_TABLE is not set
-# CONFIG_NF_LOG_ARP is not set
-# CONFIG_NF_LOG_BRIDGE is not set
-# CONFIG_NF_LOG_IPV4 is not set
-# CONFIG_NF_LOG_NETDEV is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IPV6 is not set
-# CONFIG_NF_NAT_IRC is not set
-CONFIG_NF_NAT_MASQUERADE_IPV4=y
-CONFIG_NF_NAT_MASQUERADE_IPV6=y
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_REJECT_IPV4 is not set
-# CONFIG_NF_REJECT_IPV6 is not set
-# CONFIG_NF_SOCKET_IPV4 is not set
-# CONFIG_NF_SOCKET_IPV6 is not set
-# CONFIG_NF_TABLES is not set
-CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_TABLES_BRIDGE=y
-CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_IPV4=y
-CONFIG_NF_TABLES_IPV6=y
-CONFIG_NF_TABLES_NETDEV=y
-# CONFIG_NF_TABLES_SET is not set
-# CONFIG_NF_TPROXY_IPV4 is not set
-# CONFIG_NF_TPROXY_IPV6 is not set
-# CONFIG_NI65 is not set
-# CONFIG_NI903X_WDT is not set
-# CONFIG_NIC7018_WDT is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_NIU is not set
-CONFIG_NLATTR=y
-# CONFIG_NLMON is not set
-# CONFIG_NLM_XLP_BOARD is not set
-# CONFIG_NLM_XLR_BOARD is not set
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_MAC_CELTIC is not set
-# CONFIG_NLS_MAC_CENTEURO is not set
-# CONFIG_NLS_MAC_CROATIAN is not set
-# CONFIG_NLS_MAC_CYRILLIC is not set
-# CONFIG_NLS_MAC_GAELIC is not set
-# CONFIG_NLS_MAC_GREEK is not set
-# CONFIG_NLS_MAC_ICELAND is not set
-# CONFIG_NLS_MAC_INUIT is not set
-# CONFIG_NLS_MAC_ROMAN is not set
-# CONFIG_NLS_MAC_ROMANIAN is not set
-# CONFIG_NLS_MAC_TURKISH is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_NMI_LOG_BUF_SHIFT=13
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NO_HZ_FULL is not set
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTB is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NTP_PPS is not set
-# CONFIG_NVM is not set
-# CONFIG_NVMEM is not set
-# CONFIG_NVMEM_BCM_OCOTP is not set
-# CONFIG_NVMEM_IMX_OCOTP is not set
-# CONFIG_NVME_FC is not set
-# CONFIG_NVME_TARGET is not set
-# CONFIG_NVRAM is not set
-# CONFIG_NV_TCO is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_N_GSM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OBS600 is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OF_OVERLAY is not set
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP_OCP2SCP is not set
-# CONFIG_OMAP_USB2 is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_OPROFILE is not set
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_OPT3001 is not set
-# CONFIG_OPTIMIZE_INLINING is not set
-# CONFIG_ORANGEFS_FS is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_OVERLAY_FS=y
-# CONFIG_OVERLAY_FS_INDEX is not set
-# CONFIG_OVERLAY_FS_METACOPY is not set
-CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
-# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
-CONFIG_OVERLAY_FS_XINO_AUTO=y
-# CONFIG_OWL_LOADER is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_PA12203001 is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PALMAS_GPADC is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_PANEL is not set
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_ON_OOPS_VALUE=1
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARASAN_CF is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IMX is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OCTEON_CF is not set
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC104 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCH_DMA is not set
-# CONFIG_PCH_GBE is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIE_ALTERA is not set
-# CONFIG_PCIE_ARMADA_8K is not set
-# CONFIG_PCIE_CADENCE_HOST is not set
-# CONFIG_PCIE_DPC is not set
-# CONFIG_PCIE_DW_PLAT is not set
-# CONFIG_PCIE_DW_PLAT_HOST is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIE_IPROC is not set
-# CONFIG_PCIE_KIRIN is not set
-# CONFIG_PCIE_PTM is not set
-# CONFIG_PCIE_XILINX is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_ENDPOINT is not set
-# CONFIG_PCI_ENDPOINT_TEST is not set
-# CONFIG_PCI_FTPCI100 is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_HISI is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_HOST_THUNDER_ECAM is not set
-# CONFIG_PCI_HOST_THUNDER_PEM is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_LAYERSCAPE is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCI_PRI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_SW_SWITCHTEC is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCI_XGENE is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PERCPU_STATS is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_EVENTS_AMD_POWER is not set
-# CONFIG_PERSISTENT_KEYRINGS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PHY_CPCAP_USB is not set
-# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
-# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
-# CONFIG_PHY_MAPPHONE_MDM6600 is not set
-# CONFIG_PHY_PXA_28NM_HSIC is not set
-# CONFIG_PHY_PXA_28NM_USB2 is not set
-# CONFIG_PHY_QCOM_DWC3 is not set
-# CONFIG_PHY_QCOM_USB_HS is not set
-# CONFIG_PHY_QCOM_USB_HSIC is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_PHY_TUSB1210 is not set
-# CONFIG_PHY_XGENE is not set
-# CONFIG_PI433 is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_PID_NS is not set
-CONFIG_PINCONF=y
-# CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_AXP209 is not set
-# CONFIG_PINCTRL_CEDARFORK is not set
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
-# CONFIG_PINCTRL_ICELAKE is not set
-# CONFIG_PINCTRL_MCP23S08 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-CONFIG_PINCTRL_SINGLE=y
-# CONFIG_PINCTRL_SX150X is not set
-CONFIG_PINMUX=y
-# CONFIG_PKCS7_MESSAGE_PARSER is not set
-# CONFIG_PL320_MBOX is not set
-# CONFIG_PL330_DMA is not set
-# CONFIG_PLATFORM_MHU is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_PLIP is not set
-CONFIG_PLUGIN_HOSTCC=""
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMBUS is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_DEVFREQ is not set
-# CONFIG_PM_WAKELOCKS is not set
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_POSIX_TIMERS=y
-# CONFIG_POWERCAP is not set
-# CONFIG_POWER_AVS is not set
-# CONFIG_POWER_RESET is not set
-# CONFIG_POWER_RESET_BRCMKONA is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_VERSATILE is not set
-# CONFIG_POWER_RESET_XGENE is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_PPTP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_PRINTK=y
-CONFIG_PRINTK_NMI=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROC_CHILDREN is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_PROC_STRIPPED=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_PSAMPLE is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_PSTORE is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PTP_1588_CLOCK_IXP46X is not set
-# CONFIG_PTP_1588_CLOCK_KVM is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
-# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
-# CONFIG_PWM is not set
-# CONFIG_PWM_FSL_FTM is not set
-# CONFIG_PWM_PCA9685 is not set
-CONFIG_PWRSEQ_EMMC=y
-# CONFIG_PWRSEQ_SD8787 is not set
-CONFIG_PWRSEQ_SIMPLE=y
-# CONFIG_QCA7000 is not set
-# CONFIG_QCA7000_SPI is not set
-# CONFIG_QCA7000_UART is not set
-# CONFIG_QCOM_EMAC is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
-# CONFIG_QCOM_HIDMA is not set
-# CONFIG_QCOM_HIDMA_MGMT is not set
-# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
-# CONFIG_QCOM_SPMI_IADC is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_QCOM_SPMI_VADC is not set
-# CONFIG_QED is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_QORIQ_THERMAL is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUEUED_LOCK_STAT is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8188EU is not set
-# CONFIG_R8712U is not set
-# CONFIG_R8723AU is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_RALINK is not set
-# CONFIG_RANDOM32_SELFTEST is not set
-# CONFIG_RANDOM_TRUST_CPU is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_RAS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RBTREE_TEST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_RCU_EXPEDITE_BOOT is not set
-CONFIG_RCU_EXPERT=y
-CONFIG_RCU_FANOUT=32
-CONFIG_RCU_FANOUT_LEAF=16
-# CONFIG_RCU_FAST_NO_HZ is not set
-CONFIG_RCU_KTHREAD_PRIO=0
-# CONFIG_RCU_NOCB_CPU is not set
-# CONFIG_RCU_PERF_TEST is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RC_ATI_REMOTE is not set
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_LOOPBACK is not set
-# CONFIG_RC_MAP is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-# CONFIG_RD_LZ4 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_READABLE_ASM is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REFCOUNT_FULL is not set
-# CONFIG_REGMAP is not set
-# CONFIG_REGMAP_I2C is not set
-# CONFIG_REGMAP_MMIO is not set
-# CONFIG_REGMAP_SPI is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_88PG86X is not set
-# CONFIG_REGULATOR_ACT8865 is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_DA9210 is not set
-# CONFIG_REGULATOR_DA9211 is not set
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
-# CONFIG_REGULATOR_LTC3676 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_MT6311 is not set
-# CONFIG_REGULATOR_PFUZE100 is not set
-# CONFIG_REGULATOR_PV88060 is not set
-# CONFIG_REGULATOR_PV88080 is not set
-# CONFIG_REGULATOR_PV88090 is not set
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_SY8106A is not set
-# CONFIG_REGULATOR_TI_ABB is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS65132 is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_VCTRL is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_REMOTEPROC is not set
-# CONFIG_RENESAS_PHY is not set
-# CONFIG_RESET_ATH79 is not set
-# CONFIG_RESET_BERLIN is not set
-# CONFIG_RESET_CONTROLLER is not set
-# CONFIG_RESET_IMX7 is not set
-# CONFIG_RESET_LANTIQ is not set
-# CONFIG_RESET_LPC18XX is not set
-# CONFIG_RESET_MESON is not set
-# CONFIG_RESET_PISTACHIO is not set
-# CONFIG_RESET_SOCFPGA is not set
-# CONFIG_RESET_STM32 is not set
-# CONFIG_RESET_SUNXI is not set
-# CONFIG_RESET_TEGRA_BPMP is not set
-# CONFIG_RESET_TI_SYSCON is not set
-# CONFIG_RESET_ZYNQ is not set
-# CONFIG_RFD77402 is not set
-# CONFIG_RFD_FTL is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_FULL is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_LEDS is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_RMI4_CORE is not set
-# CONFIG_RMNET is not set
-# CONFIG_ROCKCHIP_PHY is not set
-# CONFIG_ROCKER is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
-# CONFIG_RPMSG_VIRTIO is not set
-# CONFIG_RPR0521 is not set
-# CONFIG_RSEQ is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_ABB5ZES3 is not set
-# CONFIG_RTC_DRV_ABX80X is not set
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1302 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1307_CENTURY is not set
-# CONFIG_RTC_DRV_DS1307_HWMON is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1685_FAMILY is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS2404 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_FTRTC010 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_ISL12026 is not set
-# CONFIG_RTC_DRV_ISL12057 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MAX6916 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_MOXART is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_OMAP is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF2127 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_PCF8523 is not set
-# CONFIG_RTC_DRV_PCF85363 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_PS3 is not set
-# CONFIG_RTC_DRV_PT7C4338 is not set
-# CONFIG_RTC_DRV_R7301 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-# CONFIG_RTC_DRV_RV8803 is not set
-# CONFIG_RTC_DRV_RX4581 is not set
-# CONFIG_RTC_DRV_RX6110 is not set
-# CONFIG_RTC_DRV_RX8010 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_XGENE is not set
-# CONFIG_RTC_DRV_ZYNQMP is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_NVMEM is not set
-CONFIG_RTC_SYSTOHC=y
-CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-# CONFIG_RTL8366_SMI_DEBUG_FS is not set
-# CONFIG_RTL8367B_PHY is not set
-# CONFIG_RTL8367_PHY is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_RTL_CARDS is not set
-# CONFIG_RTS5208 is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RUNTIME_TESTING_MENU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_RXKAD=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SAMSUNG_LAPTOP is not set
-# CONFIG_SATA_ACARD_AHCI is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_DWC is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_HIGHBANK is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_MOBILE_LPM_POLICY=0
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_RCAR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-CONFIG_SBITMAP=y
-# CONFIG_SC92031 is not set
-# CONFIG_SCA3000 is not set
-# CONFIG_SCACHE_DEBUGFS is not set
-# CONFIG_SCC is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_MC is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_SCHED_STACK_END_CHECK is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCR24X is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CHELSIO_FCOE is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESAS2R is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HISI_SAS is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCI is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_MQ_DEFAULT is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SMARTPQI is not set
-# CONFIG_SCSI_SNIC is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_VIRTIO is not set
-# CONFIG_SCSI_WD719X is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SD_ADC_MODULATOR is not set
-# CONFIG_SECCOMP is not set
-CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ACPI_POWER is not set
-# CONFIG_SENSORS_AD7314 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADC128D818 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM1275 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS1015 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_ADT7310 is not set
-# CONFIG_SENSORS_ADT7410 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ASPEED is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_DELL_SMM is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_DS620 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_EMC6W201 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FAM15H_POWER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FTSTEUTATES is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_G762 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_GSC is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_HIH6130 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_HMC5843_I2C is not set
-# CONFIG_SENSORS_HMC5843_SPI is not set
-# CONFIG_SENSORS_HTU21 is not set
-# CONFIG_SENSORS_I5500 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IBM_CFFPS is not set
-# CONFIG_SENSORS_IIO_HWMON is not set
-# CONFIG_SENSORS_INA209 is not set
-# CONFIG_SENSORS_INA2XX is not set
-# CONFIG_SENSORS_INA3221 is not set
-# CONFIG_SENSORS_IR35221 is not set
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_K10TEMP is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LINEAGE is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM25066 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95234 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LM95245 is not set
-# CONFIG_SENSORS_LTC2945 is not set
-# CONFIG_SENSORS_LTC2978 is not set
-# CONFIG_SENSORS_LTC2990 is not set
-# CONFIG_SENSORS_LTC3815 is not set
-# CONFIG_SENSORS_LTC4151 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4222 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4260 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX16064 is not set
-# CONFIG_SENSORS_MAX16065 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX1668 is not set
-# CONFIG_SENSORS_MAX197 is not set
-# CONFIG_SENSORS_MAX20751 is not set
-# CONFIG_SENSORS_MAX31722 is not set
-# CONFIG_SENSORS_MAX31785 is not set
-# CONFIG_SENSORS_MAX31790 is not set
-# CONFIG_SENSORS_MAX34440 is not set
-# CONFIG_SENSORS_MAX6621 is not set
-# CONFIG_SENSORS_MAX6639 is not set
-# CONFIG_SENSORS_MAX6642 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6697 is not set
-# CONFIG_SENSORS_MAX8688 is not set
-# CONFIG_SENSORS_MCP3021 is not set
-# CONFIG_SENSORS_NCT6683 is not set
-# CONFIG_SENSORS_NCT6775 is not set
-# CONFIG_SENSORS_NCT7802 is not set
-# CONFIG_SENSORS_NCT7904 is not set
-# CONFIG_SENSORS_NPCM7XX is not set
-# CONFIG_SENSORS_NSA320 is not set
-# CONFIG_SENSORS_NTC_THERMISTOR is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_PMBUS is not set
-# CONFIG_SENSORS_POWR1220 is not set
-# CONFIG_SENSORS_PWM_FAN is not set
-# CONFIG_SENSORS_SCH5627 is not set
-# CONFIG_SENSORS_SCH5636 is not set
-# CONFIG_SENSORS_SCH56XX_COMMON is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SHT21 is not set
-# CONFIG_SENSORS_SHT3x is not set
-# CONFIG_SENSORS_SHTC1 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_STTS751 is not set
-# CONFIG_SENSORS_TC654 is not set
-# CONFIG_SENSORS_TC74 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP103 is not set
-# CONFIG_SENSORS_TMP108 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TPS40422 is not set
-# CONFIG_SENSORS_TPS53679 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_SENSORS_UCD9000 is not set
-# CONFIG_SENSORS_UCD9200 is not set
-# CONFIG_SENSORS_VEXPRESS is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VIA_CPUTEMP is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83773G is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_XGENE is not set
-# CONFIG_SENSORS_ZL6100 is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_ASPEED_VUART is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_8250_DW is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_8250_EXAR is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_INGENIC is not set
-# CONFIG_SERIAL_8250_LPSS is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_MID is not set
-# CONFIG_SERIAL_8250_MOXA is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_RSA is not set
-# CONFIG_SERIAL_8250_RT288X is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_ARC is not set
-# CONFIG_SERIAL_BCM63XX is not set
-# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_DEV_BUS is not set
-CONFIG_SERIAL_EARLYCON=y
-# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
-# CONFIG_SERIAL_FSL_LPUART is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_RP2 is not set
-# CONFIG_SERIAL_SC16IS7XX is not set
-# CONFIG_SERIAL_SCCNXP is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_STM32 is not set
-# CONFIG_SERIAL_ST_ASC is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_APBPS2 is not set
-# CONFIG_SERIO_ARC_PS2 is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_GPIO_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_SUN4I_PS2 is not set
-# CONFIG_SFC is not set
-# CONFIG_SFC_FALCON is not set
-# CONFIG_SFI is not set
-# CONFIG_SGETMASK_SYSCALL is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SG_POOL is not set
-# CONFIG_SG_SPLIT is not set
-CONFIG_SHMEM=y
-# CONFIG_SH_ETH is not set
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SH_TIMER_MTU2 is not set
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SI1133 is not set
-# CONFIG_SI1145 is not set
-# CONFIG_SI7005 is not set
-# CONFIG_SI7020 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SIGNALFD=y
-# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIMPLE_PM_BUS is not set
-# CONFIG_SIOX is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLABINFO=y
-# CONFIG_SLAB_FREELIST_HARDENED is not set
-# CONFIG_SLAB_FREELIST_RANDOM is not set
-CONFIG_SLAB_MERGE_DEFAULT=y
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIMBUS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_CPU_PARTIAL=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC9194 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ASIHPI is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AUDIO_GRAPH_CARD is not set
-# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BCD2000 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_DESIGNWARE_I2S is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FIREWIRE is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INTEL is not set
-CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
-CONFIG_SND_HDA_PREALLOC_SIZE=64
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_I2S_HI6210_I2S is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_KIRKWOOD_SOC is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LOLA is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-CONFIG_SND_MAX_CARDS=16
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_MXS_SOC is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCM_TIMER is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_POWERPC_SOC is not set
-# CONFIG_SND_PPC is not set
-CONFIG_SND_PROC_FS=y
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_SE6X is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SIMPLE_CARD is not set
-# CONFIG_SND_SIMPLE_SCU_CARD is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_ADAU1761_I2C is not set
-# CONFIG_SND_SOC_ADAU1761_SPI is not set
-# CONFIG_SND_SOC_ADAU7002 is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4458 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4613 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_AK5558 is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_AMD_ACP is not set
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-# CONFIG_SND_SOC_BD28623 is not set
-# CONFIG_SND_SOC_BT_SCO is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_CS35L33 is not set
-# CONFIG_SND_SOC_CS35L34 is not set
-# CONFIG_SND_SOC_CS35L35 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS4271_I2C is not set
-# CONFIG_SND_SOC_CS4271_SPI is not set
-# CONFIG_SND_SOC_CS42L42 is not set
-# CONFIG_SND_SOC_CS42L51_I2C is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_CS43130 is not set
-# CONFIG_SND_SOC_CS4349 is not set
-# CONFIG_SND_SOC_CS53L30 is not set
-# CONFIG_SND_SOC_DIO2125 is not set
-# CONFIG_SND_SOC_ES7134 is not set
-# CONFIG_SND_SOC_ES7241 is not set
-# CONFIG_SND_SOC_ES8316 is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_ES8328_I2C is not set
-# CONFIG_SND_SOC_ES8328_SPI is not set
-# CONFIG_SND_SOC_EUKREA_TLV320 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_FSL_SSI is not set
-# CONFIG_SND_SOC_GTM601 is not set
-# CONFIG_SND_SOC_ICS43432 is not set
-# CONFIG_SND_SOC_IMG is not set
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_WM8962 is not set
-# CONFIG_SND_SOC_INNO_RK3036 is not set
-# CONFIG_SND_SOC_INTEL_BAYTRAIL is not set
-# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
-# CONFIG_SND_SOC_INTEL_HASWELL is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
-# CONFIG_SND_SOC_INTEL_SST is not set
-CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
-# CONFIG_SND_SOC_MAX9759 is not set
-# CONFIG_SND_SOC_MAX98373 is not set
-# CONFIG_SND_SOC_MAX98504 is not set
-# CONFIG_SND_SOC_MAX9860 is not set
-# CONFIG_SND_SOC_MAX9867 is not set
-# CONFIG_SND_SOC_MAX98927 is not set
-# CONFIG_SND_SOC_MEDIATEK is not set
-# CONFIG_SND_SOC_MPC5200_AC97 is not set
-# CONFIG_SND_SOC_MPC5200_I2S is not set
-# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
-# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
-# CONFIG_SND_SOC_MT2701 is not set
-# CONFIG_SND_SOC_MT6351 is not set
-# CONFIG_SND_SOC_MT8173 is not set
-# CONFIG_SND_SOC_NAU8540 is not set
-# CONFIG_SND_SOC_NAU8810 is not set
-# CONFIG_SND_SOC_NAU8824 is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1789_I2C is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM179X_I2C is not set
-# CONFIG_SND_SOC_PCM179X_SPI is not set
-# CONFIG_SND_SOC_PCM186X_I2C is not set
-# CONFIG_SND_SOC_PCM186X_SPI is not set
-# CONFIG_SND_SOC_PCM3168A_I2C is not set
-# CONFIG_SND_SOC_PCM3168A_SPI is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_QCOM is not set
-# CONFIG_SND_SOC_RT5616 is not set
-# CONFIG_SND_SOC_RT5631 is not set
-# CONFIG_SND_SOC_RT5677_SPI is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_SPDIF is not set
-# CONFIG_SND_SOC_SSM2305 is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_STA32X is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_STI_SAS is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SOC_TAS5720 is not set
-# CONFIG_SND_SOC_TAS6424 is not set
-# CONFIG_SND_SOC_TDA7419 is not set
-# CONFIG_SND_SOC_TFA9879 is not set
-# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_TS3A227E is not set
-# CONFIG_SND_SOC_TSCS42XX is not set
-# CONFIG_SND_SOC_TSCS454 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8524 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8782 is not set
-# CONFIG_SND_SOC_WM8804_I2C is not set
-# CONFIG_SND_SOC_WM8804_SPI is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SOC_WM8985 is not set
-# CONFIG_SND_SOC_XTFPGA_I2S is not set
-# CONFIG_SND_SOC_ZX_AUD96P22 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
-# CONFIG_SND_SUN4I_CODEC is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_6FIRE is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_HIFACE is not set
-# CONFIG_SND_USB_POD is not set
-# CONFIG_SND_USB_PODHD is not set
-# CONFIG_SND_USB_TONEPORT is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_VARIAX is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-CONFIG_SND_X86=y
-# CONFIG_SND_XEN_FRONTEND is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
-# CONFIG_SOCK_CGROUP_DATA is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_BRCMSTB is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_HAS_OMAP2_SDRC is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_TI is not set
-# CONFIG_SOFTLOCKUP_DETECTOR is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUNDWIRE is not set
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SP5100_TCO is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPARSE_IRQ is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_SPEAKUP is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_SPI_AXI_SPI_ENGINE is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BCM_QSPI is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_FSL_ESPI is not set
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_IMG_SPFI is not set
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_LOOPBACK_TEST is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_MEM is not set
-# CONFIG_SPI_MPC52xx is not set
-# CONFIG_SPI_MPC52xx_PSC is not set
-# CONFIG_SPI_OCTEON is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_PL022 is not set
-# CONFIG_SPI_PPC4xx is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_ROCKCHIP is not set
-# CONFIG_SPI_S3C64XX is not set
-# CONFIG_SPI_SC18IS602 is not set
-# CONFIG_SPI_SLAVE is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_THUNDERX is not set
-# CONFIG_SPI_TI_QSPI is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XCOMM is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_XWAY is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SPMI is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI is not set
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
-CONFIG_SQUASHFS_EMBEDDED=y
-# CONFIG_SQUASHFS_FILE_CACHE is not set
-CONFIG_SQUASHFS_FILE_DIRECT=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_LZ4 is not set
-# CONFIG_SQUASHFS_LZO is not set
-# CONFIG_SQUASHFS_XATTR is not set
-CONFIG_SQUASHFS_XZ=y
-# CONFIG_SQUASHFS_ZLIB is not set
-# CONFIG_SQUASHFS_ZSTD is not set
-# CONFIG_SRAM is not set
-# CONFIG_SRF04 is not set
-# CONFIG_SRF08 is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_DRIVER_GPIO is not set
-# CONFIG_SSB_HOST_SOC is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-# CONFIG_STACKPROTECTOR is not set
-# CONFIG_STACKPROTECTOR_STRONG is not set
-# CONFIG_STACKTRACE is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STACK_TRACER is not set
-# CONFIG_STACK_VALIDATION is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_BOARD is not set
-# CONFIG_STAGING_GASKET_FRAMEWORK is not set
-# CONFIG_STAGING_MEDIA is not set
-CONFIG_STANDALONE=y
-# CONFIG_STATIC_KEYS_SELFTEST is not set
-# CONFIG_STATIC_USERMODEHELPER is not set
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-# CONFIG_STE_MODEM_RPROC is not set
-# CONFIG_STK3310 is not set
-# CONFIG_STK8312 is not set
-# CONFIG_STK8BA50 is not set
-# CONFIG_STM is not set
-# CONFIG_STMMAC_ETH is not set
-# CONFIG_STMMAC_PCI is not set
-# CONFIG_STMMAC_PLATFORM is not set
-# CONFIG_STM_DUMMY is not set
-# CONFIG_STM_SOURCE_CONSOLE is not set
-CONFIG_STP=y
-# CONFIG_STREAM_PARSER is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-# CONFIG_STRING_SELFTEST is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_STX104 is not set
-# CONFIG_ST_UVIS25 is not set
-# CONFIG_SUN4I_GPADC is not set
-# CONFIG_SUN50I_DE2_BUS is not set
-# CONFIG_SUN50I_ERRATUM_UNKNOWN1 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_DEBUG is not set
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNXI_SRAM is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SURFACE_3_BUTTON is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_SUSPEND_SKIP_SYNC is not set
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SWCONFIG_B53 is not set
-# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
-# CONFIG_SWCONFIG_LEDS is not set
-# CONFIG_SW_SYNC is not set
-# CONFIG_SX9500 is not set
-# CONFIG_SXGBE_ETH is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_SYNC_FILE is not set
-# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_SYSCON_REBOOT_MODE is not set
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
-# CONFIG_SYSTEM_DATA_VERIFICATION is not set
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
-CONFIG_SYSTEM_TRUSTED_KEYS=""
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_T5403 is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TASKS_RCU is not set
-# CONFIG_TASK_XACCT is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TCG_ATMEL is not set
-# CONFIG_TCG_CRB is not set
-# CONFIG_TCG_INFINEON is not set
-# CONFIG_TCG_NSC is not set
-# CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_TIS_I2C_ATMEL is not set
-# CONFIG_TCG_TIS_I2C_INFINEON is not set
-# CONFIG_TCG_TIS_I2C_NUVOTON is not set
-# CONFIG_TCG_TIS_SPI is not set
-# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
-# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCG_VTPM_PROXY is not set
-# CONFIG_TCG_XEN is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BBR is not set
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CDG is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TCP_CONG_DCTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_NV is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TCS3414 is not set
-# CONFIG_TCS3472 is not set
-# CONFIG_TEE is not set
-# CONFIG_TEGRA_AHB is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TERANETICS_PHY is not set
-# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
-# CONFIG_TEST_BITFIELD is not set
-# CONFIG_TEST_BITMAP is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_HASH is not set
-# CONFIG_TEST_HEXDUMP is not set
-# CONFIG_TEST_IDA is not set
-# CONFIG_TEST_KMOD is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_OVERFLOW is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_TEST_PRINTF is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_SORT is not set
-# CONFIG_TEST_STATIC_KEYS is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_SYSCTL is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_USER_COPY is not set
-# CONFIG_TEST_UUID is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_BANG_BANG is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THERMAL_STATISTICS is not set
-# CONFIG_THERMAL_WRITABLE_TRIPS is not set
-# CONFIG_THINKPAD_ACPI is not set
-CONFIG_THIN_ARCHIVES=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_THUNDERBOLT is not set
-# CONFIG_THUNDER_NIC_BGX is not set
-# CONFIG_THUNDER_NIC_PF is not set
-# CONFIG_THUNDER_NIC_RGX is not set
-# CONFIG_THUNDER_NIC_VF is not set
-# CONFIG_TICK_CPU_ACCOUNTING is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_TIMB_DMA is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMER_STATS is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TIPC is not set
-# CONFIG_TI_ADC081C is not set
-# CONFIG_TI_ADC0832 is not set
-# CONFIG_TI_ADC084S021 is not set
-# CONFIG_TI_ADC108S102 is not set
-# CONFIG_TI_ADC12138 is not set
-# CONFIG_TI_ADC128S052 is not set
-# CONFIG_TI_ADC161S626 is not set
-# CONFIG_TI_ADS1015 is not set
-# CONFIG_TI_ADS7950 is not set
-# CONFIG_TI_ADS8688 is not set
-# CONFIG_TI_AM335X_ADC is not set
-# CONFIG_TI_CPSW is not set
-# CONFIG_TI_CPSW_ALE is not set
-# CONFIG_TI_CPTS is not set
-# CONFIG_TI_DAC082S085 is not set
-# CONFIG_TI_DAC5571 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TI_DAVINCI_CPDMA is not set
-# CONFIG_TI_DAVINCI_MDIO is not set
-# CONFIG_TI_ST is not set
-# CONFIG_TI_SYSCON_RESET is not set
-# CONFIG_TI_TLC4541 is not set
-# CONFIG_TLAN is not set
-# CONFIG_TLS is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMP006 is not set
-# CONFIG_TMP007 is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TORTURE_TEST is not set
-# CONFIG_TOSHIBA_HAPS is not set
-# CONFIG_TOUCHSCREEN_88PM860X is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_BU21029 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
-# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_DA9052 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
-# CONFIG_TOUCHSCREEN_EKTF2127 is not set
-# CONFIG_TOUCHSCREEN_ELAN is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_EXC3000 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GOODIX is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_HIDEEP is not set
-# CONFIG_TOUCHSCREEN_HP600 is not set
-# CONFIG_TOUCHSCREEN_HP7XX is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_IPAQ_MICRO is not set
-# CONFIG_TOUCHSCREEN_IPROC is not set
-# CONFIG_TOUCHSCREEN_LPC32XX is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MC13783 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
-# CONFIG_TOUCHSCREEN_MIGOR is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MMS114 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MX25 is not set
-# CONFIG_TOUCHSCREEN_MXS_LRADC is not set
-# CONFIG_TOUCHSCREEN_PCAP is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_PROPERTIES is not set
-# CONFIG_TOUCHSCREEN_RM_TS is not set
-# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_S6SY761 is not set
-# CONFIG_TOUCHSCREEN_SILEAD is not set
-# CONFIG_TOUCHSCREEN_SIS_I2C is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_STMFTS is not set
-# CONFIG_TOUCHSCREEN_STMPE is not set
-# CONFIG_TOUCHSCREEN_SUN4I is not set
-# CONFIG_TOUCHSCREEN_SUR40 is not set
-# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
-# CONFIG_TOUCHSCREEN_SX8654 is not set
-# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-# CONFIG_TOUCHSCREEN_TS4800 is not set
-# CONFIG_TOUCHSCREEN_TSC2004 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
-# CONFIG_TOUCHSCREEN_TSC200X_CORE is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_3M is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
-# CONFIG_TOUCHSCREEN_USB_E2I is not set
-# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
-# CONFIG_TOUCHSCREEN_USB_ELO is not set
-# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
-# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
-# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
-# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
-# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
-# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_ITM is not set
-# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
-# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
-# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
-# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
-# CONFIG_TOUCHSCREEN_WM831X is not set
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9712 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE is not set
-# CONFIG_TOUCHSCREEN_ZET6223 is not set
-# CONFIG_TOUCHSCREEN_ZFORCE is not set
-# CONFIG_TPL0102 is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_TRACER_SNAPSHOT is not set
-# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_TRACE_EVAL_MAP_FILE is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TRACE_SINK is not set
-# CONFIG_TRACING_EVENTS_GPIO is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TRIM_UNUSED_KSYMS is not set
-# CONFIG_TRUSTED_KEYS is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2772 is not set
-# CONFIG_TSL2x7x is not set
-# CONFIG_TSL4531 is not set
-# CONFIG_TSYS01 is not set
-# CONFIG_TSYS02D is not set
-# CONFIG_TTPCI_EEPROM is not set
-CONFIG_TTY=y
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_TUN is not set
-# CONFIG_TUN_VNET_CROSS_LE is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL6030_GPADC is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_TYPEC is not set
-# CONFIG_TYPEC_TCPM is not set
-# CONFIG_TYPEC_UCSI is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
-# CONFIG_UBIFS_FS_ENCRYPTION is not set
-CONFIG_UBIFS_FS_FORMAT4=y
-# CONFIG_UBIFS_FS_SECURITY is not set
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBSAN is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UCSI is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UHID is not set
-CONFIG_UID16=y
-# CONFIG_UIO is not set
-# CONFIG_ULTRA is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_UNISYSSPAR is not set
-# CONFIG_UNISYS_VISORBUS is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNIX_DIAG is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UPROBES is not set
-# CONFIG_UPROBE_EVENTS is not set
-# CONFIG_US5182D is not set
-# CONFIG_USB is not set
-# CONFIG_USBIP_CORE is not set
-CONFIG_USBIP_VHCI_HC_PORTS=8
-CONFIG_USBIP_VHCI_NR_HCS=1
-# CONFIG_USBIP_VUDC is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AMD5536UDC is not set
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_BDC_UDC is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_CHAOSKEY is not set
-# CONFIG_USB_CHIPIDEA is not set
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_DEFAULT_PERSIST=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_DWC2 is not set
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_DUAL_ROLE is not set
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_PERIPHERAL is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_DWC3_EXYNOS is not set
-# CONFIG_USB_DWC3_HAPS is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_OF_SIMPLE is not set
-# CONFIG_USB_DWC3_PCI is not set
-# CONFIG_USB_DWC3_QCOM is not set
-# CONFIG_USB_DWC3_ULPI is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_EHCI_ATH79 is not set
-# CONFIG_USB_EHCI_HCD_AT91 is not set
-# CONFIG_USB_EHCI_HCD_OMAP is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_EHCI_MSM is not set
-# CONFIG_USB_EHCI_MV is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHSET_TEST_FIXTURE is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_EZUSB_FX2 is not set
-# CONFIG_USB_FOTG210_HCD is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GR_UDC is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_DTCS033 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STK1135 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TOUPTEK is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_G_WEBCAM is not set
-# CONFIG_USB_HCD_TEST_MODE is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HSIC_USB3503 is not set
-# CONFIG_USB_HSIC_USB4604 is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IMX21_HCD is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1301 is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760 is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_LAN78XX is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
-# CONFIG_USB_LED_TRIG is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LINK_LAYER_TEST is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MAX3421_HCD is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MSM_OTG is not set
-# CONFIG_USB_MTU3 is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MXS_PHY is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_MBIM is not set
-# CONFIG_USB_NET_CDC_NCM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_CH9200 is not set
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_DRIVERS is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_SR9700 is not set
-# CONFIG_USB_NET_SR9800 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PCI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHY is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RCAR_PHY is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_ROLE_SWITCH is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_F8153X is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MXUPORT is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QT2 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SIMPLE is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_UPD78F0730 is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_WISHBONE is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SNP_UDC_PLAT is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_ULPI_BUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VL600 is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XHCI_DBGCAP is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YUREX is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USELIB is not set
-# CONFIG_USERFAULTFD is not set
-# CONFIG_USE_OF is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_U_SERIAL_CONSOLE is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_V4L_TEST_DRIVERS is not set
-# CONFIG_VBOXGUEST is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_VDSO is not set
-# CONFIG_VEML6070 is not set
-# CONFIG_VETH is not set
-# CONFIG_VEXPRESS_CONFIG is not set
-# CONFIG_VF610_ADC is not set
-# CONFIG_VF610_DAC is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
-# CONFIG_VHOST_NET is not set
-# CONFIG_VHOST_VSOCK is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV7393 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_AK881X is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_CADENCE is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CS3308 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DT3155 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_I2C is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_ML86V7667 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9M111 is not set
-# CONFIG_VIDEO_MT9T112 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MT9V111 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_NOON010PC30 is not set
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OV2640 is not set
-# CONFIG_VIDEO_OV2659 is not set
-# CONFIG_VIDEO_OV5695 is not set
-# CONFIG_VIDEO_OV6650 is not set
-# CONFIG_VIDEO_OV7640 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_OV772X is not set
-# CONFIG_VIDEO_OV7740 is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_RJ54N1 is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA6752HS is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_SONY_BTF_MPX is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_THS8200 is not set
-# CONFIG_VIDEO_TIMBERDALE is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TM6000 is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_TW2804 is not set
-# CONFIG_VIDEO_TW9903 is not set
-# CONFIG_VIDEO_TW9906 is not set
-# CONFIG_VIDEO_TW9910 is not set
-# CONFIG_VIDEO_UDA1342 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBTV is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_BLK_SCSI is not set
-# CONFIG_VIRTIO_INPUT is not set
-CONFIG_VIRTIO_MENU=y
-# CONFIG_VIRTIO_MMIO is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
-# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_VL6180 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VLAN_8021Q_MVRP is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_PVSCSI is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VOP_BUS is not set
-# CONFIG_VORTEX is not set
-# CONFIG_VSOCKETS is not set
-# CONFIG_VSOCKETS_DIAG is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_VXGE is not set
-# CONFIG_VXLAN is not set
-# CONFIG_VZ89X is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_W1_SLAVE_DS2405 is not set
-# CONFIG_W1_SLAVE_DS2406 is not set
-# CONFIG_W1_SLAVE_DS2408 is not set
-# CONFIG_W1_SLAVE_DS2413 is not set
-# CONFIG_W1_SLAVE_DS2423 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2438 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_DS2780 is not set
-# CONFIG_W1_SLAVE_DS2781 is not set
-# CONFIG_W1_SLAVE_DS2805 is not set
-# CONFIG_W1_SLAVE_DS28E04 is not set
-# CONFIG_W1_SLAVE_DS28E17 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_CORE is not set
-CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
-# CONFIG_WATCHDOG_SYSFS is not set
-# CONFIG_WD80x3 is not set
-# CONFIG_WDAT_WDT is not set
-# CONFIG_WDTPCI is not set
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PRIV=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WILINK_PLATFORM_DATA=y
-# CONFIG_WIMAX is not set
-# CONFIG_WIMAX_GDM72XX is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_WDS is not set
-# CONFIG_WIZNET_W5100 is not set
-# CONFIG_WIZNET_W5300 is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_WL18XX is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_VENDOR_ADMTEK is not set
-# CONFIG_WLAN_VENDOR_ATH is not set
-# CONFIG_WLAN_VENDOR_ATMEL is not set
-# CONFIG_WLAN_VENDOR_BROADCOM is not set
-# CONFIG_WLAN_VENDOR_CISCO is not set
-# CONFIG_WLAN_VENDOR_INTEL is not set
-# CONFIG_WLAN_VENDOR_INTERSIL is not set
-# CONFIG_WLAN_VENDOR_MARVELL is not set
-# CONFIG_WLAN_VENDOR_MEDIATEK is not set
-# CONFIG_WLAN_VENDOR_QUANTENNA is not set
-# CONFIG_WLAN_VENDOR_RALINK is not set
-# CONFIG_WLAN_VENDOR_REALTEK is not set
-# CONFIG_WLAN_VENDOR_RSI is not set
-# CONFIG_WLAN_VENDOR_ST is not set
-# CONFIG_WLAN_VENDOR_TI is not set
-# CONFIG_WLAN_VENDOR_ZYDAS is not set
-# CONFIG_WLCORE is not set
-# CONFIG_WL_MEDIATEK is not set
-CONFIG_WL_TI=y
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-# CONFIG_WQ_WATCHDOG is not set
-# CONFIG_WW_MUTEX_SELFTEST is not set
-# CONFIG_X25 is not set
-# CONFIG_X509_CERTIFICATE_PARSER is not set
-# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
-# CONFIG_X86_PKG_TEMP_THERMAL is not set
-CONFIG_X86_SYSFB=y
-# CONFIG_XDP_SOCKETS is not set
-# CONFIG_XEN is not set
-# CONFIG_XEN_GRANT_DMA_ALLOC is not set
-# CONFIG_XEN_PVCALLS_FRONTEND is not set
-CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_INTERFACE is not set
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_ONLINE_SCRUB is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_WARN is not set
-# CONFIG_XILINX_AXI_EMAC is not set
-# CONFIG_XILINX_DMA is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_GMII2RGMII is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_VCU is not set
-# CONFIG_XILINX_WATCHDOG is not set
-# CONFIG_XILINX_ZYNQMP_DMA is not set
-# CONFIG_XILLYBUS is not set
-# CONFIG_XIL_AXIS_FIFO is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_XMON is not set
-CONFIG_XZ_DEC=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
-# CONFIG_XZ_DEC_BCJ is not set
-# CONFIG_XZ_DEC_IA64 is not set
-# CONFIG_XZ_DEC_POWERPC is not set
-# CONFIG_XZ_DEC_SPARC is not set
-# CONFIG_XZ_DEC_TEST is not set
-# CONFIG_XZ_DEC_X86 is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZBUD is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZIIRAVE_WATCHDOG is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_ZLIB_INFLATE is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_ZOPT2201 is not set
-# CONFIG_ZPA2326 is not set
-# CONFIG_ZPOOL is not set
-# CONFIG_ZRAM is not set
-# CONFIG_ZRAM_MEMORY_TRACKING is not set
-# CONFIG_ZSMALLOC is not set
-# CONFIG_ZX_TDM is not set
diff --git a/target/linux/generic/config-4.9 b/target/linux/generic/config-4.9
deleted file mode 100644
index 1194f5a5a8..0000000000
--- a/target/linux/generic/config-4.9
+++ /dev/null
@@ -1,5344 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_6LOWPAN is not set
-# CONFIG_6LOWPAN_DEBUGFS is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB8500_CORE is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACERHDF is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_ALS is not set
-# CONFIG_ACPI_APEI is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_CONFIGFS is not set
-# CONFIG_ACPI_CUSTOM_METHOD is not set
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_HED is not set
-# CONFIG_ACPI_NFIT is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_ACPI_TABLE_UPGRADE is not set
-# CONFIG_ACPI_VIDEO is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5592R is not set
-# CONFIG_AD5593R is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5761 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7266 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7303 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD8366 is not set
-# CONFIG_AD8801 is not set
-# CONFIG_AD9523 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADE7753 is not set
-# CONFIG_ADE7754 is not set
-# CONFIG_ADE7758 is not set
-# CONFIG_ADE7759 is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADF4350 is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADIS16060 is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16204 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16220 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_ADJD_S311 is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ADT7316 is not set
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_ADXRS450 is not set
-CONFIG_AEABI=y
-# CONFIG_AFE4403 is not set
-# CONFIG_AFE4404 is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_KCM is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AF_RXRPC_INJECT_LOSS is not set
-# CONFIG_AF_RXRPC_IPV6 is not set
-# CONFIG_AGP is not set
-# CONFIG_AHCI_CEVA is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_AHCI_MVEBU is not set
-# CONFIG_AHCI_QORIQ is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIX_PARTITION is not set
-# CONFIG_AK09911 is not set
-# CONFIG_AK8974 is not set
-# CONFIG_AK8975 is not set
-# CONFIG_AL3320A is not set
-# CONFIG_ALIM7101_WDT is not set
-CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_ALTERA_MBOX is not set
-# CONFIG_ALTERA_STAPL is not set
-# CONFIG_ALTERA_TSE is not set
-# CONFIG_ALX is not set
-# CONFIG_AM2315 is not set
-# CONFIG_AM335X_PHY_USB is not set
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMD_PHY is not set
-# CONFIG_AMD_XGBE is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_AMILO_RFKILL is not set
-# CONFIG_ANDROID is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APDS9300 is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_APDS9960 is not set
-# CONFIG_APM8018X is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_APPLE_GMUX is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AQUANTIA_PHY is not set
-# CONFIG_AR5523 is not set
-# CONFIG_AR7 is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR8216_PHY_LEDS is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_ARTPEC is not set
-# CONFIG_ARCH_ASPEED is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM_21664 is not set
-# CONFIG_ARCH_BCM_23550 is not set
-# CONFIG_ARCH_BCM_281XX is not set
-# CONFIG_ARCH_BCM_5301X is not set
-# CONFIG_ARCH_BCM_53573 is not set
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_CYGNUS is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BCM_NSP is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGICOLOR is not set
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_EXYNOS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_KEYSTONE is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_MMAP_RND_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_BITS_MIN=8
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MULTIPLATFORM is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NSPIRE is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP2PLUS is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_OXNAS is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SHMOBILE_MULTI is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_TANGO is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VIRT is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_VULCAN is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
-# CONFIG_ARCH_WM8505 is not set
-# CONFIG_ARCH_WM8750 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARC_EMAC is not set
-# CONFIG_ARM64_ERRATUM_1024718 is not set
-# CONFIG_ARM64_ERRATUM_819472 is not set
-# CONFIG_ARM64_ERRATUM_824069 is not set
-# CONFIG_ARM64_ERRATUM_826319 is not set
-# CONFIG_ARM64_ERRATUM_827319 is not set
-# CONFIG_ARM64_ERRATUM_832075 is not set
-# CONFIG_ARM64_ERRATUM_834220 is not set
-# CONFIG_ARM64_ERRATUM_843419 is not set
-# CONFIG_ARM64_ERRATUM_845719 is not set
-# CONFIG_ARM_APPENDED_DTB is not set
-# CONFIG_ARM_ARCH_TIMER is not set
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_ARM_CCI400_PMU is not set
-# CONFIG_ARM_CCI5xx_PMU is not set
-# CONFIG_ARM_CCN is not set
-# CONFIG_ARM_CPUIDLE is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-# CONFIG_ARM_CRYPTO is not set
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_ARM_ERRATA_754327 is not set
-# CONFIG_ARM_ERRATA_764369 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-# CONFIG_ARM_ERRATA_775420 is not set
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_818325_852422 is not set
-# CONFIG_ARM_ERRATA_821420 is not set
-# CONFIG_ARM_ERRATA_825619 is not set
-# CONFIG_ARM_ERRATA_852421 is not set
-# CONFIG_ARM_ERRATA_852423 is not set
-CONFIG_ARM_GIC_MAX_NR=1
-# CONFIG_ARM_KERNMEM_PERMS is not set
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-# CONFIG_ARM_MHU is not set
-# CONFIG_ARM_MODULE_PLTS is not set
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-# CONFIG_ARM_PSCI is not set
-# CONFIG_ARM_PTDUMP is not set
-# CONFIG_ARM_SBSA_WATCHDOG is not set
-# CONFIG_ARM_SCPI_PROTOCOL is not set
-# CONFIG_ARM_TIMER_SP804 is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_ARM_VIRT_EXT is not set
-# CONFIG_AS3935 is not set
-# CONFIG_ASM9260_TIMER is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_ASUS_WIRELESS is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_AT91_SAMA5D2_ADC is not set
-# CONFIG_ATA is not set
-# CONFIG_ATAGS is not set
-CONFIG_ATAGS_PROC=y
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-CONFIG_ATA_BMDMA=y
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH10K is not set
-# CONFIG_ATH25 is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH6KL is not set
-# CONFIG_ATH79 is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATLAS_PH_SENSOR is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATMEL_PIT is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ATP is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
-# CONFIG_AURORA_NB8800 is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTO_ZRELADDR is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_AXP288_ADC is not set
-# CONFIG_AXP288_FUEL_GAUGE is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-# CONFIG_BACKLIGHT_BD6107 is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_BACKLIGHT_GPIO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKLIGHT_LM3630A is not set
-# CONFIG_BACKLIGHT_LM3639 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_BACKLIGHT_LV5207LP is not set
-# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_PM8941_WLED is not set
-# CONFIG_BACKLIGHT_RPI is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27XXX is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_GAUGE_LTC2941 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCACHE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_BCM7038_WDT is not set
-# CONFIG_BCM7XXX_PHY is not set
-# CONFIG_BCM87XX_PHY is not set
-# CONFIG_BCMA is not set
-# CONFIG_BCMA_DRIVER_GPIO is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BCMGENET is not set
-# CONFIG_BCM_IPROC_ADC is not set
-# CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BE2NET is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BGMAC is not set
-# CONFIG_BH1750 is not set
-# CONFIG_BH1780 is not set
-# CONFIG_BIG_KEYS is not set
-# CONFIG_BIG_LITTLE is not set
-# CONFIG_BINARY_PRINTF is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BINFMT_SCRIPT=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_CMDLINE_PARSER is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_CPQ_DA is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_NULL_BLK is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_PMEM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_BLK_DEV_RSXX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SKD is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_THROTTLING is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLOCK=y
-# CONFIG_BMA180 is not set
-# CONFIG_BMA220 is not set
-# CONFIG_BMC150_ACCEL is not set
-# CONFIG_BMC150_MAGN is not set
-# CONFIG_BMC150_MAGN_I2C is not set
-# CONFIG_BMC150_MAGN_SPI is not set
-# CONFIG_BMG160 is not set
-# CONFIG_BMI160_I2C is not set
-# CONFIG_BMI160_SPI is not set
-# CONFIG_BMIPS_GENERIC is not set
-# CONFIG_BMP085 is not set
-# CONFIG_BMP085_I2C is not set
-# CONFIG_BMP085_SPI is not set
-# CONFIG_BMP280 is not set
-# CONFIG_BNA is not set
-# CONFIG_BNX2 is not set
-# CONFIG_BNX2X is not set
-# CONFIG_BNXT is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOKE_WDT is not set
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOOT_RAW=y
-CONFIG_BPF=y
-CONFIG_BPF_JIT=y
-CONFIG_BPF_SYSCALL=y
-# CONFIG_BPQETHER is not set
-CONFIG_BQL=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMSMAC is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_BRIDGE_VLAN_FILTERING=y
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_ASSERT is not set
-# CONFIG_BTRFS_DEBUG is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_BREDR is not set
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTUSB_RTL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_3WIRE is not set
-# CONFIG_BT_HCIUART_AG6XX is not set
-# CONFIG_BT_HCIUART_ATH3K is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUART_MRVL is not set
-# CONFIG_BT_HCIUART_QCA is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-# CONFIG_BT_LEDS is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_SELFTEST is not set
-CONFIG_BUG=y
-CONFIG_BUILDTIME_EXTABLE_SORT=y
-# CONFIG_BUILD_BIN2C is not set
-# CONFIG_C2PORT is not set
-CONFIG_CACHE_L2X0_PMU=y
-# CONFIG_CADENCE_WATCHDOG is not set
-# CONFIG_CAIF is not set
-# CONFIG_CAN is not set
-# CONFIG_CAN_BCM is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_GS_USB is not set
-# CONFIG_CAN_GW is not set
-# CONFIG_CAN_IFI_CANFD is not set
-# CONFIG_CAN_M_CAN is not set
-# CONFIG_CAN_RAW is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_RCAR_CANFD is not set
-# CONFIG_CAN_SLCAN is not set
-# CONFIG_CAN_SUN4I is not set
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CARL9170 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CAVIUM_ERRATUM_22375 is not set
-# CONFIG_CAVIUM_ERRATUM_23144 is not set
-# CONFIG_CAVIUM_ERRATUM_23154 is not set
-# CONFIG_CAVIUM_ERRATUM_27456 is not set
-# CONFIG_CAVIUM_OCTEON_SOC is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC10001_ADC is not set
-# CONFIG_CC_STACKPROTECTOR is not set
-CONFIG_CC_STACKPROTECTOR_NONE=y
-# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
-# CONFIG_CC_STACKPROTECTOR_STRONG is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NET_CLASSID is not set
-# CONFIG_CGROUP_NET_PRIO is not set
-# CONFIG_CHARGER_BQ2415X is not set
-# CONFIG_CHARGER_BQ24190 is not set
-# CONFIG_CHARGER_BQ24257 is not set
-# CONFIG_CHARGER_BQ24735 is not set
-# CONFIG_CHARGER_BQ25890 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_RT9455 is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_CHROME_PLATFORMS is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_ACL is not set
-# CONFIG_CIFS_DEBUG is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_FSCACHE is not set
-# CONFIG_CIFS_NFSD_EXPORT is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_SMB2 is not set
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIO_DAC is not set
-# CONFIG_CLEANCACHE is not set
-# CONFIG_CLKSRC_VERSATILE is not set
-# CONFIG_CLK_QORIQ is not set
-# CONFIG_CLOCK_THERMAL is not set
-CONFIG_CLS_U32_MARK=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CM32181 is not set
-# CONFIG_CM3232 is not set
-# CONFIG_CM3323 is not set
-# CONFIG_CM36651 is not set
-# CONFIG_CMA is not set
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_CMDLINE_PARTITION is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMMON_CLK_CDCE706 is not set
-# CONFIG_COMMON_CLK_CDCE925 is not set
-# CONFIG_COMMON_CLK_CS2000_CP is not set
-# CONFIG_COMMON_CLK_IPROC is not set
-# CONFIG_COMMON_CLK_NXP is not set
-# CONFIG_COMMON_CLK_PIC32 is not set
-# CONFIG_COMMON_CLK_PWM is not set
-# CONFIG_COMMON_CLK_PXA is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_COMMON_CLK_SI514 is not set
-# CONFIG_COMMON_CLK_SI5351 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
-CONFIG_COMPACTION=y
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_COMPAT is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_COMPILE_TEST is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_COPS is not set
-# CONFIG_CORDIC is not set
-# CONFIG_COREDUMP is not set
-# CONFIG_CORESIGHT is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CPU_IDLE_GOV_MENU is not set
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_NO_EFFICIENT_FFS is not set
-CONFIG_CPU_SW_DOMAIN_PAN=y
-# CONFIG_CRAMFS is not set
-CONFIG_CRASHLOG=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_BIT is not set
-CONFIG_CRC32_SARWATE=y
-# CONFIG_CRC32_SELFTEST is not set
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SLICEBY8 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_CRC8 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSS_COMPILE=""
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_842 is not set
-# CONFIG_CRYPTO_AEAD is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_AES_ARM is not set
-# CONFIG_CRYPTO_AES_ARM_BS is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CHACHA20 is not set
-# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_CMAC is not set
-# CONFIG_CRYPTO_CRC32 is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
-# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
-# CONFIG_CRYPTO_DEV_CCP is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
-# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_MXC_SCC is not set
-# CONFIG_CRYPTO_DEV_MXS_DCP is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
-# CONFIG_CRYPTO_DEV_QAT_C62X is not set
-# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
-# CONFIG_CRYPTO_DEV_QCE is not set
-# CONFIG_CRYPTO_DEV_SAHARA is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_CRYPTO_DH is not set
-# CONFIG_CRYPTO_DRBG_CTR is not set
-# CONFIG_CRYPTO_DRBG_HASH is not set
-# CONFIG_CRYPTO_DRBG_MENU is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_ECDH is not set
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-# CONFIG_CRYPTO_HASH is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_JITTERENTROPY is not set
-# CONFIG_CRYPTO_KEYWRAP is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZ4 is not set
-# CONFIG_CRYPTO_LZ4HC is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_MCRYPTD is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-CONFIG_CRYPTO_PCRYPT=y
-# CONFIG_CRYPTO_POLY1305 is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_ARM is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA3 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_USER is not set
-# CONFIG_CRYPTO_USER_API_AEAD is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_RNG is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_CUSE is not set
-# CONFIG_CW1200 is not set
-# CONFIG_CXL_AFU_DRIVER_OPS is not set
-# CONFIG_CXL_BASE is not set
-# CONFIG_CXL_EEH is not set
-# CONFIG_CXL_KERNEL_API is not set
-# CONFIG_CYPRESS_FIRMWARE is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DCB is not set
-# CONFIG_DDR is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_DWARF4 is not set
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_DEBUG_INFO_SPLIT is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_KOBJECT_RELEASE is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PAGE_REF is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_DEBUG_RODATA_TEST is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-# CONFIG_DEBUG_SET_MODULE_RONX is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
-# CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_WX is not set
-# CONFIG_DEBUG_ZBOOT is not set
-# CONFIG_DECNET is not set
-CONFIG_DEFAULT_CUBIC=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DELL_RBTN is not set
-# CONFIG_DELL_SMO8800 is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_DEVMEM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DGAP is not set
-# CONFIG_DGNC is not set
-# CONFIG_DHT11 is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
-# CONFIG_DISPLAY_CONNECTOR_DVI is not set
-# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
-# CONFIG_DISPLAY_ENCODER_TFP410 is not set
-# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
-# CONFIG_DISPLAY_PANEL_DPI is not set
-# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMARD06 is not set
-# CONFIG_DMARD09 is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMA_SHARED_BUFFER is not set
-# CONFIG_DM_CACHE is not set
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_ERA is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DM_LOG_WRITES is not set
-# CONFIG_DM_MQ_DEFAULT is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_SWITCH is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_DP83848_PHY is not set
-# CONFIG_DP83867_PHY is not set
-CONFIG_DQL=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_ANALOGIX_ANX78XX is not set
-# CONFIG_DRM_ARCPGU is not set
-# CONFIG_DRM_ARMADA is not set
-# CONFIG_DRM_AST is not set
-# CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_DP_AUX_CHARDEV is not set
-# CONFIG_DRM_DUMB_VGA_DAC is not set
-# CONFIG_DRM_ETNAVIV is not set
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_FBDEV_EMULATION is not set
-# CONFIG_DRM_FSL_DCU is not set
-# CONFIG_DRM_HDLCD is not set
-# CONFIG_DRM_HISI_KIRIN is not set
-# CONFIG_DRM_I2C_ADV7511 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_LEGACY is not set
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_MALI_DISPLAY is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_NXP_PTN3460 is not set
-# CONFIG_DRM_OMAP is not set
-# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
-# CONFIG_DRM_PANEL_LG_LG4573 is not set
-# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
-# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
-# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
-# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
-# CONFIG_DRM_PARADE_PS8622 is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_SII902X is not set
-# CONFIG_DRM_STI is not set
-# CONFIG_DRM_SUN4I is not set
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_TOSHIBA_TC358767 is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_VGEM is not set
-# CONFIG_DRM_VIRTIO_GPU is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DS1803 is not set
-# CONFIG_DST_CACHE is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-CONFIG_DUMMY_CONSOLE_COLUMNS=80
-CONFIG_DUMMY_CONSOLE_ROWS=25
-# CONFIG_DUMMY_IRQ is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_DWMAC_IPQ806X is not set
-# CONFIG_DWMAC_LPC18XX is not set
-# CONFIG_DWMAC_MESON is not set
-# CONFIG_DWMAC_ROCKCHIP is not set
-# CONFIG_DWMAC_SOCFPGA is not set
-# CONFIG_DWMAC_STI is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_DW_WATCHDOG is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_HWTS is not set
-# CONFIG_EARLY_PRINTK_8250 is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EFI is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_EFS_FS is not set
-CONFIG_ELFCORE=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EMBEDDED=y
-# CONFIG_EM_TIMER_STI is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENA_ETHERNET is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_ENCX24J600 is not set
-# CONFIG_ENIC is not set
-# CONFIG_EPAPR_PARAVIRT is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_ET131X is not set
-CONFIG_ETHERNET=y
-# CONFIG_ETHOC is not set
-CONFIG_EVENTFD=y
-CONFIG_EXPERT=y
-# CONFIG_EXPORTFS is not set
-# CONFIG_EXPORTFS_BLOCK_OPS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_ENCRYPTION is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_EXT4_USE_FOR_EXT2=y
-# CONFIG_EXTCON is not set
-# CONFIG_EXTCON_ADC_JACK is not set
-# CONFIG_EXTCON_AXP288 is not set
-# CONFIG_EXTCON_GPIO is not set
-# CONFIG_EXTCON_MAX3355 is not set
-# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
-# CONFIG_EXTCON_RT8973A is not set
-# CONFIG_EXTCON_SM5502 is not set
-# CONFIG_EXTCON_USB_GPIO is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_F2FS_FAULT_INJECTION is not set
-# CONFIG_F2FS_FS is not set
-# CONFIG_F2FS_FS_ENCRYPTION is not set
-# CONFIG_F2FS_FS_POSIX_ACL is not set
-# CONFIG_F2FS_IO_TRACE is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_FANOTIFY is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_DEFAULT_UTF8 is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BOTH_ENDIAN is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DA8XX is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_IMX is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_MXS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-CONFIG_FB_NOTIFY=y
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_OPENCORES is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIMPLE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SM712 is not set
-# CONFIG_FB_SM750 is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_SSD1307 is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TFT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_FENCE_TRACE is not set
-# CONFIG_FHANDLE is not set
-CONFIG_FIB_RULES=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FM10K is not set
-# CONFIG_FMC is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_FPGA is not set
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FRONTSWAP is not set
-# CONFIG_FSCACHE is not set
-# CONFIG_FSL_EDMA is not set
-# CONFIG_FSL_MC_BUS is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_DAX is not set
-# CONFIG_FS_ENCRYPTION is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FTGMAC100 is not set
-# CONFIG_FTL is not set
-# CONFIG_FTMAC100 is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_FUJITSU_ES is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_FUJITSU_TABLET is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-# CONFIG_FW_CFG_SYSFS is not set
-CONFIG_FW_LOADER=y
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_GACT_PROB=y
-# CONFIG_GADGET_UAC1 is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_GATEWORKS_GW16083 is not set
-# CONFIG_GCC_PLUGINS is not set
-# CONFIG_GCOV is not set
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_GDB_SCRIPTS is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
-# CONFIG_GENERIC_ADC_THERMAL is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_NET_UTILS=y
-# CONFIG_GENERIC_PHY is not set
-# CONFIG_GENEVE is not set
-# CONFIG_GENWQE is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_DUMMYLL is not set
-# CONFIG_GLOB_SELFTEST is not set
-# CONFIG_GOLDFISH is not set
-# CONFIG_GP2AP020A00F is not set
-# CONFIG_GPIOLIB is not set
-# CONFIG_GPIO_74X164 is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_ALTERA is not set
-# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_AMDPT is not set
-# CONFIG_GPIO_BCM_KONA is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DWAPB is not set
-# CONFIG_GPIO_EM is not set
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_GPIO_MM is not set
-# CONFIG_GPIO_GRGPIO is not set
-# CONFIG_GPIO_ICH is not set
-# CONFIG_GPIO_IT87 is not set
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_MOCKUP is not set
-# CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_PCH is not set
-# CONFIG_GPIO_PISOSR is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_RDC321X is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SCH311X is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SYSCON is not set
-# CONFIG_GPIO_SYSFS is not set
-# CONFIG_GPIO_TPIC2810 is not set
-# CONFIG_GPIO_TS4900 is not set
-# CONFIG_GPIO_TS5500 is not set
-# CONFIG_GPIO_VX855 is not set
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_GPIO_WS16C48 is not set
-# CONFIG_GPIO_XGENE is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_ZEVIO is not set
-# CONFIG_GPIO_ZX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GREYBUS is not set
-# CONFIG_GS_FPGABOOT is not set
-# CONFIG_GTP is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_HAPPYMEAL is not set
-CONFIG_HARDENED_USERCOPY=y
-# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
-# CONFIG_HAVE_ARCH_HASH is not set
-CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
-# CONFIG_HAVE_ARCH_VMAP_STACK is not set
-CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
-# CONFIG_HAVE_ARM_ARCH_TIMER is not set
-CONFIG_HAVE_EXIT_THREAD=y
-CONFIG_HAVE_GCC_PLUGINS=y
-CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_CAT=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_NMI=y
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDC100X is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFS_FS_POSIX_ACL is not set
-# CONFIG_HI8435 is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_ALPS is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_APPLEIR is not set
-# CONFIG_HID_AUREAL is not set
-# CONFIG_HID_BATTERY_STRENGTH is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BETOP_FF is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CMEDIA is not set
-# CONFIG_HID_CORSAIR is not set
-# CONFIG_HID_CP2112 is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_ELECOM is not set
-# CONFIG_HID_ELO is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GEMBIRD is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_HID_GFRM is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GT683R is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_ICADE is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LED is not set
-# CONFIG_HID_LENOVO is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_LOGITECH_DJ is not set
-# CONFIG_HID_LOGITECH_HIDPP is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PENMOUNT is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_PLANTRONICS is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_RMI is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SENSOR_HUB is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_STEELSERIES is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_THINGM is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_WIIMOTE is not set
-# CONFIG_HID_XINMO is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HIP04_ETH is not set
-# CONFIG_HIPPI is not set
-# CONFIG_HISI_FEMAC is not set
-# CONFIG_HIX5HD2_GMAC is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_HNS is not set
-# CONFIG_HNS_DSAF is not set
-# CONFIG_HNS_ENET is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP03 is not set
-# CONFIG_HP100 is not set
-# CONFIG_HP206C is not set
-CONFIG_HPET_MMAP_DEFAULT=y
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HP_WIRELESS is not set
-# CONFIG_HSI is not set
-# CONFIG_HSR is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTU21 is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWLAT_TRACER is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWSPINLOCK_OMAP is not set
-CONFIG_HW_PERF_EVENTS=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
-# CONFIG_HW_RANDOM_OMAP3_ROM is not set
-# CONFIG_HW_RANDOM_PPC4XX is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_HW_RANDOM_TPM is not set
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HW_RANDOM_VIRTIO is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYSDN is not set
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_200 is not set
-# CONFIG_HZ_24 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_500 is not set
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-# CONFIG_I2C_AU1550 is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_BCM_IPROC is not set
-# CONFIG_I2C_CADENCE is not set
-# CONFIG_I2C_CBUS_GPIO is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEMUX_PINCTRL is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_EMEV2 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_HID is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_IMG is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_ISMT is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_MUX_GPIO is not set
-# CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
-# CONFIG_I2C_MUX_PINCTRL is not set
-# CONFIG_I2C_MUX_REG is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OCTEON is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_I2C_RK3X is not set
-# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
-# CONFIG_I2C_SCMI is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SLAVE is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_THUNDERX is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VERSATILE is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I40E is not set
-# CONFIG_I40EVF is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IAQCORE is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_EMAC_DEBUG is not set
-# CONFIG_IBM_EMAC_EMAC4 is not set
-# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_EMAC_RGMII is not set
-# CONFIG_IBM_EMAC_TAH is not set
-# CONFIG_IBM_EMAC_ZMII is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEAPAD_LAPTOP is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDLE_PAGE_TRACKING is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IEEE802154_ADF7242 is not set
-# CONFIG_IEEE802154_ATUSB is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IIO is not set
-# CONFIG_IIO_BUFFER_CB is not set
-# CONFIG_IIO_CONFIGFS is not set
-CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
-# CONFIG_IIO_INTERRUPT_TRIGGER is not set
-# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_SSP_SENSORHUB is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_IIO_ST_PRESS is not set
-# CONFIG_IIO_SW_DEVICE is not set
-# CONFIG_IIO_SW_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-# CONFIG_IMGPDC_WDT is not set
-# CONFIG_IMG_MDC_DMA is not set
-# CONFIG_IMX7D_ADC is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_INA2XX_ADC is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_UDP_DIAG is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_AXP20X_PEK is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_LEDS is not set
-# CONFIG_INPUT_MATRIXKMAP is not set
-# CONFIG_INPUT_MAX8997_HAPTIC is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INT340X_THERMAL is not set
-# CONFIG_INTEL_HID_EVENT is not set
-# CONFIG_INTEL_IDLE is not set
-# CONFIG_INTEL_IDMA64 is not set
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_INTEL_ISH_HID is not set
-# CONFIG_INTEL_MEI is not set
-# CONFIG_INTEL_MEI_ME is not set
-# CONFIG_INTEL_MEI_TXE is not set
-# CONFIG_INTEL_MIC_CARD is not set
-# CONFIG_INTEL_MIC_HOST is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_INTEL_OAKTRAIL is not set
-# CONFIG_INTEL_PMC_CORE is not set
-# CONFIG_INTEL_PUNIT_IPC is not set
-# CONFIG_INTEL_RST is not set
-# CONFIG_INTEL_SMARTCONNECT is not set
-# CONFIG_INTEL_SOC_PMIC is not set
-# CONFIG_INTEL_TH is not set
-# CONFIG_INTEL_VBTN is not set
-# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_INV_MPU6050_I2C is not set
-# CONFIG_INV_MPU6050_IIO is not set
-# CONFIG_INV_MPU6050_SPI is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IO_STRICT_DEVMEM=y
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_NAT is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
-# CONFIG_IPACK_BUS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_FOU is not set
-# CONFIG_IPV6_FOU_TUNNEL is not set
-# CONFIG_IPV6_ILA is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_VTI is not set
-# CONFIG_IPVLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_FIB_TRIE_STATS is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_SYNPROXY is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_SET is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_IRQ_POLL is not set
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_IR_GPIO_CIR is not set
-# CONFIG_IR_HIX5HD2 is not set
-# CONFIG_IR_IGORPLUGUSB is not set
-# CONFIG_IR_IGUANA is not set
-# CONFIG_IR_IMG is not set
-# CONFIG_IR_IMON is not set
-# CONFIG_IR_JVC_DECODER is not set
-# CONFIG_IR_LIRC_CODEC is not set
-# CONFIG_IR_MCEUSB is not set
-# CONFIG_IR_NEC_DECODER is not set
-# CONFIG_IR_RC5_DECODER is not set
-# CONFIG_IR_RC6_DECODER is not set
-# CONFIG_IR_REDRAT3 is not set
-# CONFIG_IR_SONY_DECODER is not set
-# CONFIG_IR_STREAMZAP is not set
-# CONFIG_IR_TTUSBIR is not set
-# CONFIG_ISA_BUS is not set
-# CONFIG_ISA_BUS_API is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_ISL29125 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ISS4xx is not set
-# CONFIG_ITG3200 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IXGB is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_JSA1212 is not set
-# CONFIG_JUMP_LABEL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_BASE_RELATIVE=y
-# CONFIG_KALLSYMS_UNCOMPRESSED is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KASAN is not set
-# CONFIG_KCOV is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_CAT is not set
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_LZ4 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KERNEL_XZ=y
-CONFIG_KERNFS=y
-# CONFIG_KEXEC is not set
-# CONFIG_KEYBOARD_ADC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_BCM is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
-# CONFIG_KEYBOARD_STMPE is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KEY_DH_OPERATIONS is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KMX61 is not set
-# CONFIG_KPROBES is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_KS7010 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-CONFIG_KUSER_HELPERS=y
-# CONFIG_KVM_AMD is not set
-# CONFIG_KVM_GUEST is not set
-# CONFIG_KVM_INTEL is not set
-# CONFIG_KXCJK1013 is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_L2TP is not set
-# CONFIG_L2TP_ETH is not set
-# CONFIG_L2TP_IP is not set
-# CONFIG_L2TP_V3 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LANTIQ is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-CONFIG_LBDAF=y
-# CONFIG_LCD_AMS369FG06 is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_ILI922X is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LMS501KF03 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LDISC_AUTOLOAD=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
-# CONFIG_LEDS_BCM6328 is not set
-# CONFIG_LEDS_BCM6358 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_BLINKM is not set
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_CLASS_FLASH is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_IS31FL319X is not set
-# CONFIG_LEDS_IS31FL32XX is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_LM355x is not set
-# CONFIG_LEDS_LM3642 is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP3952 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_LP5562 is not set
-# CONFIG_LEDS_LP8501 is not set
-# CONFIG_LEDS_LP8860 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_MLXCPLD is not set
-# CONFIG_LEDS_NS2 is not set
-# CONFIG_LEDS_OT200 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA963X is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SYSCON is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_TLC591XX is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_CAMERA is not set
-# CONFIG_LEDS_TRIGGER_CPU is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_DISK is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_MTD is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-# CONFIG_LEDS_TRIGGER_ONESHOT is not set
-# CONFIG_LEDS_TRIGGER_PANIC is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LGUEST is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LIBNVDIMM is not set
-# CONFIG_LIDAR_LITE_V2 is not set
-# CONFIG_LIQUIDIO is not set
-# CONFIG_LIRC_STAGING is not set
-# CONFIG_LIS3L02DQ is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_LNET is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIWHEELS_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
-# CONFIG_LOONGSON_MC146818 is not set
-# CONFIG_LPC_ICH is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_LTC2485 is not set
-# CONFIG_LTE_GDM724X is not set
-# CONFIG_LTPC is not set
-# CONFIG_LTR501 is not set
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_LWTUNNEL is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_LZ4HC_COMPRESS is not set
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_LZO_COMPRESS is not set
-# CONFIG_LZO_DECOMPRESS is not set
-# CONFIG_M62332 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
-# CONFIG_MACB is not set
-# CONFIG_MACH_ASM9260 is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
-# CONFIG_MACH_PIC32 is not set
-# CONFIG_MACH_PISTACHIO is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MACH_XILFPGA is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACSEC is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MAG3110 is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-# CONFIG_MAGIC_SYSRQ_SERIAL is not set
-# CONFIG_MAILBOX is not set
-# CONFIG_MANDATORY_FILE_LOCKING is not set
-# CONFIG_MANGLE_BOOTARGS is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX1027 is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX30100 is not set
-# CONFIG_MAX44000 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MAX5487 is not set
-# CONFIG_MAX5821 is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MAXIM_THERMOCOUPLE is not set
-CONFIG_MAY_USE_DEVLINK=y
-# CONFIG_MC3230 is not set
-# CONFIG_MCB is not set
-# CONFIG_MCP320X is not set
-# CONFIG_MCP3422 is not set
-# CONFIG_MCP4131 is not set
-# CONFIG_MCP4531 is not set
-# CONFIG_MCP4725 is not set
-# CONFIG_MCP4922 is not set
-# CONFIG_MCPM is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MDIO_HISI_FEMAC is not set
-# CONFIG_MDIO_OCTEON is not set
-# CONFIG_MDIO_THUNDER is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_CAMERA_SUPPORT is not set
-# CONFIG_MEDIA_CONTROLLER is not set
-# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
-# CONFIG_MEDIA_PCI_SUPPORT is not set
-# CONFIG_MEDIA_RADIO_SUPPORT is not set
-# CONFIG_MEDIA_RC_SUPPORT is not set
-# CONFIG_MEDIA_SDR_SUPPORT is not set
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_USB_SUPPORT is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-CONFIG_MEMBARRIER=y
-# CONFIG_MEMORY is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MEN_A21_WDT is not set
-# CONFIG_MESON_SM is not set
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_ACT8945A is not set
-# CONFIG_MFD_ARIZONA_I2C is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_MFD_AS3722 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-# CONFIG_MFD_ATMEL_HLCDC is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_BCM590XX is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_CROS_EC is not set
-# CONFIG_MFD_CS5535 is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_DA9062 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_DA9150 is not set
-# CONFIG_MFD_DLN2 is not set
-# CONFIG_MFD_EXYNOS_LPASS is not set
-# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_KEMPLD is not set
-# CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_LP3943 is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77620 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX77843 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC13XXX_I2C is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_MENF21BMC is not set
-# CONFIG_MFD_MT6397 is not set
-# CONFIG_MFD_OMAP_USB_HOST is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_RETU is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_RN5T618 is not set
-# CONFIG_MFD_RT5033 is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_RTSX_USB is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SI476X_CORE is not set
-# CONFIG_MFD_SKY81452 is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TI_AM335X_TSCADC is not set
-# CONFIG_MFD_TI_LP873X is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TPS65086 is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS65218 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_MFD_VIPERBOARD is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MICROCHIP_PHY is not set
-# CONFIG_MICROSEMI_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_CDMM is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_FPU_EMULATOR is not set
-# CONFIG_MIPS_GENERIC is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MIPS_PARAVIRT is not set
-# CONFIG_MIPS_PLATFORM_DEVICES is not set
-# CONFIG_MIPS_SEAD3 is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-# CONFIG_MKISS is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX90614 is not set
-# CONFIG_MLXSW_CORE is not set
-# CONFIG_MMA7455_I2C is not set
-# CONFIG_MMA7455_SPI is not set
-# CONFIG_MMA7660 is not set
-# CONFIG_MMA8452 is not set
-# CONFIG_MMA9551 is not set
-# CONFIG_MMA9553 is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC35240 is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_AU1X is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_MMC_BLOCK_MINORS=8
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_MTK is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_BCM_KONA is not set
-# CONFIG_MMC_SDHCI_F_SDH30 is not set
-# CONFIG_MMC_SDHCI_IPROC is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHCI_OF_ARASAN is not set
-# CONFIG_MMC_SDHCI_OF_AT91 is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_TOSHIBA_PCI is not set
-# CONFIG_MMC_USDHI6ROL0 is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_MMU=y
-CONFIG_MODULES=y
-# CONFIG_MODULE_COMPRESS is not set
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SIG is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_STRIPPED=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOST is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_FOCALTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_MPL115 is not set
-# CONFIG_MPL115_I2C is not set
-# CONFIG_MPL115_SPI is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_MPLS is not set
-# CONFIG_MS5611 is not set
-# CONFIG_MS5637 is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_MSI_LAPTOP is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LATCH_ADDR is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MT81xx_NOR is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_AMS_DELTA is not set
-# CONFIG_MTD_NAND_AR934X is not set
-# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
-# CONFIG_MTD_NAND_ATMEL is not set
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_BCH is not set
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_BRCMNAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_CM_X270 is not set
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DAVINCI is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_DENALI_DT is not set
-# CONFIG_MTD_NAND_DENALI_PCI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_ECC is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_NAND_FSMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_GPMI_NAND is not set
-# CONFIG_MTD_NAND_HISI504 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_JZ4740 is not set
-# CONFIG_MTD_NAND_MPC5121_NFC is not set
-# CONFIG_MTD_NAND_MTK is not set
-# CONFIG_MTD_NAND_MXC is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_NDFC is not set
-# CONFIG_MTD_NAND_NUC900 is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
-# CONFIG_MTD_NAND_ORION is not set
-# CONFIG_MTD_NAND_PASEMI is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_RB4XX is not set
-# CONFIG_MTD_NAND_RB750 is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_S3C2410 is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_NAND_SOCRATES is not set
-# CONFIG_MTD_NAND_TMIO is not set
-# CONFIG_MTD_NAND_TXX9NDFMC is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_PARTITIONED_MASTER is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_MTD_SPI_NOR is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
-CONFIG_MTD_SPLIT=y
-# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
-# CONFIG_MTD_SPLIT_FIT_FW is not set
-# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_MINOR_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_SUPPORT=y
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_TRX_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SWAP is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UIMAGE_SPLIT is not set
-CONFIG_MULTIUSER=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVMDIO is not set
-# CONFIG_MVNETA_BM is not set
-# CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MVSWITCH_PHY is not set
-# CONFIG_MV_XOR_V2 is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MXC4005 is not set
-# CONFIG_MXC6255 is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NAU7802 is not set
-# CONFIG_NBPFAXI_DMA is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2000 is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_INGRESS is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_BPF is not set
-# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETLINK_DIAG is not set
-# CONFIG_NETLINK_MMAP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_BPF is not set
-# CONFIG_NET_ACT_CSUM is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IFE is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_ACT_SKBMOD is not set
-# CONFIG_NET_ACT_TUNNEL_KEY is not set
-# CONFIG_NET_ACT_VLAN is not set
-CONFIG_NET_CADENCE=y
-# CONFIG_NET_CALXEDA_XGMAC is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_BPF is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FLOWER is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_MATCHALL is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CORE=y
-# CONFIG_NET_DEVLINK is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_QCA8K is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CANID is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NET_FOU is not set
-# CONFIG_NET_FOU_IP_TUNNELS is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPVTI is not set
-# CONFIG_NET_IP_TUNNEL is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-# CONFIG_NET_L3_MASTER_DEV is not set
-# CONFIG_NET_MPLS_GSO is not set
-# CONFIG_NET_NCSI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NET_PTP_CLASSIFY is not set
-CONFIG_NET_RX_BUSY_POLL=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_CODEL is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_DSMARK is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_FQ is not set
-CONFIG_NET_SCH_FQ_CODEL=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HHF is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PIE is not set
-# CONFIG_NET_SCH_PLUG is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_NET_SWITCHDEV is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_TEAM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_UDP_TUNNEL is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NET_VENDOR_ADAPTEC=y
-CONFIG_NET_VENDOR_AGERE=y
-CONFIG_NET_VENDOR_ALTEON=y
-CONFIG_NET_VENDOR_AMAZON=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_ARC=y
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_NET_VENDOR_AURORA=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_BROCADE=y
-CONFIG_NET_VENDOR_CAVIUM=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_CISCO=y
-CONFIG_NET_VENDOR_DEC=y
-CONFIG_NET_VENDOR_DLINK=y
-CONFIG_NET_VENDOR_EMULEX=y
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_NET_VENDOR_EZCHIP=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_NET_VENDOR_FUJITSU=y
-CONFIG_NET_VENDOR_HISILICON=y
-CONFIG_NET_VENDOR_HP=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_NET_VENDOR_INTEL=y
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_MYRI=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_NETRONOME=y
-CONFIG_NET_VENDOR_NVIDIA=y
-CONFIG_NET_VENDOR_OKI=y
-CONFIG_NET_VENDOR_QLOGIC=y
-CONFIG_NET_VENDOR_QUALCOMM=y
-CONFIG_NET_VENDOR_RDC=y
-CONFIG_NET_VENDOR_REALTEK=y
-CONFIG_NET_VENDOR_RENESAS=y
-CONFIG_NET_VENDOR_ROCKER=y
-CONFIG_NET_VENDOR_SAMSUNG=y
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SILAN=y
-CONFIG_NET_VENDOR_SIS=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_SUN=y
-CONFIG_NET_VENDOR_SYNOPSYS=y
-CONFIG_NET_VENDOR_TEHUTI=y
-CONFIG_NET_VENDOR_TI=y
-CONFIG_NET_VENDOR_TOSHIBA=y
-CONFIG_NET_VENDOR_VIA=y
-CONFIG_NET_VENDOR_WIZNET=y
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_NET_VENDOR_XIRCOM=y
-# CONFIG_NET_VRF is not set
-# CONFIG_NET_XGENE is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFC is not set
-# CONFIG_NFP_NETVF is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_FSCACHE is not set
-# CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V2 is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NFT_BRIDGE_META is not set
-# CONFIG_NFT_BRIDGE_REJECT is not set
-# CONFIG_NFT_DUP_IPV4 is not set
-# CONFIG_NFT_DUP_IPV6 is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROCFS=y
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CONNTRACK_ZONES is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_DUP_IPV4 is not set
-# CONFIG_NF_DUP_IPV6 is not set
-# CONFIG_NF_LOG_ARP is not set
-# CONFIG_NF_LOG_IPV4 is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IPV6 is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set
-# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_REJECT_IPV4 is not set
-# CONFIG_NF_REJECT_IPV6 is not set
-# CONFIG_NF_TABLES is not set
-# CONFIG_NF_TABLES_NETDEV is not set
-# CONFIG_NI65 is not set
-# CONFIG_NI903X_WDT is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_NIU is not set
-CONFIG_NLATTR=y
-# CONFIG_NLMON is not set
-# CONFIG_NLM_XLP_BOARD is not set
-# CONFIG_NLM_XLR_BOARD is not set
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_MAC_CELTIC is not set
-# CONFIG_NLS_MAC_CENTEURO is not set
-# CONFIG_NLS_MAC_CROATIAN is not set
-# CONFIG_NLS_MAC_CYRILLIC is not set
-# CONFIG_NLS_MAC_GAELIC is not set
-# CONFIG_NLS_MAC_GREEK is not set
-# CONFIG_NLS_MAC_ICELAND is not set
-# CONFIG_NLS_MAC_INUIT is not set
-# CONFIG_NLS_MAC_ROMAN is not set
-# CONFIG_NLS_MAC_ROMANIAN is not set
-# CONFIG_NLS_MAC_TURKISH is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_NMI_LOG_BUF_SHIFT=13
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NO_HZ_FULL is not set
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTB is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NTP_PPS is not set
-# CONFIG_NVM is not set
-# CONFIG_NVMEM is not set
-# CONFIG_NVMEM_IMX_OCOTP is not set
-# CONFIG_NVME_TARGET is not set
-# CONFIG_NVRAM is not set
-# CONFIG_NV_TCO is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_N_GSM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OBS600 is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OF_OVERLAY is not set
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP_OCP2SCP is not set
-# CONFIG_OMAP_USB2 is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_OPROFILE is not set
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_OPT3001 is not set
-# CONFIG_OPTIMIZE_INLINING is not set
-# CONFIG_ORANGEFS_FS is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_OVERLAY_FS=y
-# CONFIG_OWL_LOADER is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_PA12203001 is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PALMAS_GPADC is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_PANEL is not set
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_ON_OOPS_VALUE=1
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARASAN_CF is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IMX is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OCTEON_CF is not set
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCH_DMA is not set
-# CONFIG_PCH_GBE is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIE_ALTERA is not set
-# CONFIG_PCIE_ARMADA_8K is not set
-# CONFIG_PCIE_DPC is not set
-# CONFIG_PCIE_DW_PLAT is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIE_IPROC is not set
-# CONFIG_PCIE_PTM is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_HOST_THUNDER_ECAM is not set
-# CONFIG_PCI_HOST_THUNDER_PEM is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_LAYERSCAPE is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCI_PRI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_EVENTS_AMD_POWER is not set
-# CONFIG_PERSISTENT_KEYRINGS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
-# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
-# CONFIG_PHY_PXA_28NM_HSIC is not set
-# CONFIG_PHY_PXA_28NM_USB2 is not set
-# CONFIG_PHY_QCOM_DWC3 is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_PID_NS is not set
-CONFIG_PINCONF=y
-# CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_PINMUX=y
-# CONFIG_PKCS7_MESSAGE_PARSER is not set
-# CONFIG_PL320_MBOX is not set
-# CONFIG_PL330_DMA is not set
-# CONFIG_PLATFORM_MHU is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_PLIP is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMBUS is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_DEVFREQ is not set
-# CONFIG_PM_WAKELOCKS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_POWERCAP is not set
-# CONFIG_POWER_AVS is not set
-# CONFIG_POWER_RESET is not set
-# CONFIG_POWER_RESET_BRCMKONA is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_VERSATILE is not set
-# CONFIG_POWER_RESET_XGENE is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_PPC_BARRIER_NOSPEC=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_PPTP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_PRINTK=y
-CONFIG_PRINTK_NMI=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROC_CHILDREN is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_PROC_STRIPPED=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_PSTORE is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PTP_1588_CLOCK_IXP46X is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
-# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
-# CONFIG_PWM is not set
-# CONFIG_PWM_FSL_FTM is not set
-# CONFIG_PWM_PCA9685 is not set
-CONFIG_PWRSEQ_EMMC=y
-CONFIG_PWRSEQ_SIMPLE=y
-# CONFIG_QCA7000 is not set
-# CONFIG_QCOM_EMAC is not set
-# CONFIG_QCOM_HIDMA is not set
-# CONFIG_QCOM_HIDMA_MGMT is not set
-# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
-# CONFIG_QCOM_SPMI_IADC is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_QCOM_SPMI_VADC is not set
-# CONFIG_QED is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_QORIQ_THERMAL is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUEUED_LOCK_STAT is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8188EU is not set
-# CONFIG_R8712U is not set
-# CONFIG_R8723AU is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_RALINK is not set
-# CONFIG_RANDOM32_SELFTEST is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_RAS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RBTREE_TEST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_RCU_EXPEDITE_BOOT is not set
-CONFIG_RCU_EXPERT=y
-CONFIG_RCU_FANOUT=32
-CONFIG_RCU_FANOUT_LEAF=16
-# CONFIG_RCU_FAST_NO_HZ is not set
-CONFIG_RCU_KTHREAD_PRIO=0
-# CONFIG_RCU_NOCB_CPU is not set
-# CONFIG_RCU_PERF_TEST is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RC_ATI_REMOTE is not set
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_LOOPBACK is not set
-# CONFIG_RC_MAP is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-# CONFIG_RD_LZ4 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_READABLE_ASM is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REGMAP is not set
-# CONFIG_REGMAP_I2C is not set
-# CONFIG_REGMAP_MMIO is not set
-# CONFIG_REGMAP_SPI is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_ACT8865 is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_DA9210 is not set
-# CONFIG_REGULATOR_DA9211 is not set
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
-# CONFIG_REGULATOR_LTC3676 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_MT6311 is not set
-# CONFIG_REGULATOR_PFUZE100 is not set
-# CONFIG_REGULATOR_PV88060 is not set
-# CONFIG_REGULATOR_PV88080 is not set
-# CONFIG_REGULATOR_PV88090 is not set
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_TI_ABB is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_RESET_ATH79 is not set
-# CONFIG_RESET_BERLIN is not set
-# CONFIG_RESET_CONTROLLER is not set
-# CONFIG_RESET_LPC18XX is not set
-# CONFIG_RESET_MESON is not set
-# CONFIG_RESET_PISTACHIO is not set
-# CONFIG_RESET_SOCFPGA is not set
-# CONFIG_RESET_STM32 is not set
-# CONFIG_RESET_SUNXI is not set
-# CONFIG_RESET_ZYNQ is not set
-# CONFIG_RFD_FTL is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_FULL is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_LEDS is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_RMI4_CORE is not set
-# CONFIG_ROCKER is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPR0521 is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_ABB5ZES3 is not set
-# CONFIG_RTC_DRV_ABX80X is not set
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1302 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1307_CENTURY is not set
-# CONFIG_RTC_DRV_DS1307_HWMON is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1685_FAMILY is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS2404 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_ISL12057 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MAX6916 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_MOXART is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_OMAP is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF2127 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_PCF8523 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_PS3 is not set
-# CONFIG_RTC_DRV_PT7C4338 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-# CONFIG_RTC_DRV_RV8803 is not set
-# CONFIG_RTC_DRV_RX4581 is not set
-# CONFIG_RTC_DRV_RX6110 is not set
-# CONFIG_RTC_DRV_RX8010 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_XGENE is not set
-# CONFIG_RTC_DRV_ZYNQMP is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-CONFIG_RTC_SYSTOHC=y
-CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-# CONFIG_RTL8366_SMI_DEBUG_FS is not set
-# CONFIG_RTL8367B_PHY is not set
-# CONFIG_RTL8367_PHY is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_RTL_CARDS is not set
-# CONFIG_RTS5208 is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_RXKAD=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SAMSUNG_LAPTOP is not set
-# CONFIG_SATA_ACARD_AHCI is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_DWC is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_HIGHBANK is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_RCAR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-CONFIG_SBITMAP=y
-# CONFIG_SC92031 is not set
-# CONFIG_SCA3000 is not set
-# CONFIG_SCACHE_DEBUGFS is not set
-# CONFIG_SCC is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_MC is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_SCHED_STACK_END_CHECK is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CHELSIO_FCOE is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESAS2R is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HISI_SAS is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCI is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_MQ_DEFAULT is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SMARTPQI is not set
-# CONFIG_SCSI_SNIC is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_VIRTIO is not set
-# CONFIG_SCSI_WD719X is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SECCOMP is not set
-CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ACPI_POWER is not set
-# CONFIG_SENSORS_AD7314 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADC128D818 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM1275 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS1015 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_ADT7310 is not set
-# CONFIG_SENSORS_ADT7410 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_DELL_SMM is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_DS620 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_EMC6W201 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FAM15H_POWER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FTSTEUTATES is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_G762 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_GSC is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_HIH6130 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_HMC5843_I2C is not set
-# CONFIG_SENSORS_HMC5843_SPI is not set
-# CONFIG_SENSORS_HTU21 is not set
-# CONFIG_SENSORS_I5500 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IIO_HWMON is not set
-# CONFIG_SENSORS_INA209 is not set
-# CONFIG_SENSORS_INA2XX is not set
-# CONFIG_SENSORS_INA3221 is not set
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_K10TEMP is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LINEAGE is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM25066 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95234 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LM95245 is not set
-# CONFIG_SENSORS_LTC2945 is not set
-# CONFIG_SENSORS_LTC2978 is not set
-# CONFIG_SENSORS_LTC2990 is not set
-# CONFIG_SENSORS_LTC3815 is not set
-# CONFIG_SENSORS_LTC4151 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4222 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4260 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX16064 is not set
-# CONFIG_SENSORS_MAX16065 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX1668 is not set
-# CONFIG_SENSORS_MAX197 is not set
-# CONFIG_SENSORS_MAX20751 is not set
-# CONFIG_SENSORS_MAX31722 is not set
-# CONFIG_SENSORS_MAX31790 is not set
-# CONFIG_SENSORS_MAX34440 is not set
-# CONFIG_SENSORS_MAX6639 is not set
-# CONFIG_SENSORS_MAX6642 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6697 is not set
-# CONFIG_SENSORS_MAX8688 is not set
-# CONFIG_SENSORS_MCP3021 is not set
-# CONFIG_SENSORS_NCT6683 is not set
-# CONFIG_SENSORS_NCT6775 is not set
-# CONFIG_SENSORS_NCT7802 is not set
-# CONFIG_SENSORS_NCT7904 is not set
-# CONFIG_SENSORS_NSA320 is not set
-# CONFIG_SENSORS_NTC_THERMISTOR is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_PMBUS is not set
-# CONFIG_SENSORS_POWR1220 is not set
-# CONFIG_SENSORS_PWM_FAN is not set
-# CONFIG_SENSORS_SCH5627 is not set
-# CONFIG_SENSORS_SCH5636 is not set
-# CONFIG_SENSORS_SCH56XX_COMMON is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SHT21 is not set
-# CONFIG_SENSORS_SHT3x is not set
-# CONFIG_SENSORS_SHTC1 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_TC74 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP103 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TPS40422 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_SENSORS_UCD9000 is not set
-# CONFIG_SENSORS_UCD9200 is not set
-# CONFIG_SENSORS_VEXPRESS is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VIA_CPUTEMP is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_XGENE is not set
-# CONFIG_SENSORS_ZL6100 is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_8250_DW is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_INGENIC is not set
-# CONFIG_SERIAL_8250_LPSS is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_MID is not set
-# CONFIG_SERIAL_8250_MOXA is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_RSA is not set
-# CONFIG_SERIAL_8250_RT288X is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_ARC is not set
-# CONFIG_SERIAL_BCM63XX is not set
-# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_EARLYCON=y
-# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
-# CONFIG_SERIAL_FSL_LPUART is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_RP2 is not set
-# CONFIG_SERIAL_SC16IS7XX is not set
-# CONFIG_SERIAL_SCCNXP is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_STM32 is not set
-# CONFIG_SERIAL_ST_ASC is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_APBPS2 is not set
-# CONFIG_SERIO_ARC_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_SUN4I_PS2 is not set
-# CONFIG_SFC is not set
-# CONFIG_SFI is not set
-# CONFIG_SGETMASK_SYSCALL is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SG_POOL is not set
-# CONFIG_SG_SPLIT is not set
-CONFIG_SHMEM=y
-# CONFIG_SH_ETH is not set
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SH_TIMER_MTU2 is not set
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SI1145 is not set
-# CONFIG_SI7005 is not set
-# CONFIG_SI7020 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SIGNALFD=y
-# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLABINFO=y
-# CONFIG_SLAB_FREELIST_RANDOM is not set
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_CPU_PARTIAL=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC9194 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ASIHPI is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BCD2000 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_DESIGNWARE_I2S is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FIREWIRE is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INTEL is not set
-CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
-CONFIG_SND_HDA_PREALLOC_SIZE=64
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_KIRKWOOD_SOC is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LOLA is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_MXS_SOC is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCM_TIMER is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_POWERPC_SOC is not set
-# CONFIG_SND_PPC is not set
-CONFIG_SND_PROC_FS=y
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_SE6X is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SIMPLE_CARD is not set
-# CONFIG_SND_SIMPLE_SCU_CARD is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_ADAU7002 is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4613 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_AMD_ACP is not set
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-# CONFIG_SND_SOC_BT_SCO is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_CS35L33 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS4271_I2C is not set
-# CONFIG_SND_SOC_CS4271_SPI is not set
-# CONFIG_SND_SOC_CS42L51_I2C is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_CS4349 is not set
-# CONFIG_SND_SOC_CS53L30 is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_EUKREA_TLV320 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_FSL_SSI is not set
-# CONFIG_SND_SOC_GTM601 is not set
-# CONFIG_SND_SOC_ICS43432 is not set
-# CONFIG_SND_SOC_IMG is not set
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_WM8962 is not set
-# CONFIG_SND_SOC_INNO_RK3036 is not set
-# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
-# CONFIG_SND_SOC_INTEL_SST is not set
-# CONFIG_SND_SOC_MAX98504 is not set
-# CONFIG_SND_SOC_MAX9860 is not set
-# CONFIG_SND_SOC_MEDIATEK is not set
-# CONFIG_SND_SOC_MPC5200_AC97 is not set
-# CONFIG_SND_SOC_MPC5200_I2S is not set
-# CONFIG_SND_SOC_MT2701 is not set
-# CONFIG_SND_SOC_MT8173 is not set
-# CONFIG_SND_SOC_NAU8810 is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM179X_I2C is not set
-# CONFIG_SND_SOC_PCM179X_SPI is not set
-# CONFIG_SND_SOC_PCM3168A_I2C is not set
-# CONFIG_SND_SOC_PCM3168A_SPI is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_QCOM is not set
-# CONFIG_SND_SOC_RT5616 is not set
-# CONFIG_SND_SOC_RT5631 is not set
-# CONFIG_SND_SOC_RT5677_SPI is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_SPDIF is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_STA32X is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_STI_SAS is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SOC_TAS5720 is not set
-# CONFIG_SND_SOC_TFA9879 is not set
-# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_TS3A227E is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8804_I2C is not set
-# CONFIG_SND_SOC_WM8804_SPI is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SOC_WM8985 is not set
-# CONFIG_SND_SOC_XTFPGA_I2S is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SUN4I_CODEC is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_6FIRE is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_HIFACE is not set
-# CONFIG_SND_USB_POD is not set
-# CONFIG_SND_USB_PODHD is not set
-# CONFIG_SND_USB_TONEPORT is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_VARIAX is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOCK_CGROUP_DATA is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_BRCMSTB is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_HAS_OMAP2_SDRC is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_TI is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SP5100_TCO is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPARSE_IRQ is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_SPEAKUP is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_SPI_AXI_SPI_ENGINE is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BCM_QSPI is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_FSL_ESPI is not set
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_IMG_SPFI is not set
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_LOOPBACK_TEST is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_MPC52xx is not set
-# CONFIG_SPI_MPC52xx_PSC is not set
-# CONFIG_SPI_OCTEON is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_PL022 is not set
-# CONFIG_SPI_PPC4xx is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_ROCKCHIP is not set
-# CONFIG_SPI_SC18IS602 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_THUNDERX is not set
-# CONFIG_SPI_TI_QSPI is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XCOMM is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_XWAY is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SPMI is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI is not set
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
-CONFIG_SQUASHFS_EMBEDDED=y
-# CONFIG_SQUASHFS_FILE_CACHE is not set
-CONFIG_SQUASHFS_FILE_DIRECT=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_LZ4 is not set
-# CONFIG_SQUASHFS_LZO is not set
-# CONFIG_SQUASHFS_XATTR is not set
-CONFIG_SQUASHFS_XZ=y
-# CONFIG_SQUASHFS_ZLIB is not set
-# CONFIG_SRAM is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_DRIVER_GPIO is not set
-# CONFIG_SSB_HOST_SOC is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-# CONFIG_STACKTRACE is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STACK_TRACER is not set
-# CONFIG_STACK_VALIDATION is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_BOARD is not set
-# CONFIG_STAGING_MEDIA is not set
-CONFIG_STANDALONE=y
-# CONFIG_STATIC_KEYS_SELFTEST is not set
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-# CONFIG_STE_MODEM_RPROC is not set
-# CONFIG_STK3310 is not set
-# CONFIG_STK8312 is not set
-# CONFIG_STK8BA50 is not set
-# CONFIG_STM is not set
-# CONFIG_STMMAC_ETH is not set
-# CONFIG_STMMAC_PCI is not set
-# CONFIG_STMMAC_PLATFORM is not set
-# CONFIG_STM_DUMMY is not set
-# CONFIG_STM_SOURCE_CONSOLE is not set
-CONFIG_STP=y
-# CONFIG_STREAM_PARSER is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_STX104 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_DEBUG is not set
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNXI_SRAM is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_SUSPEND_SKIP_SYNC is not set
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SWCONFIG_B53 is not set
-# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
-# CONFIG_SWCONFIG_LEDS is not set
-# CONFIG_SX9500 is not set
-# CONFIG_SXGBE_ETH is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_SYNC_FILE is not set
-# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_SYSCON_REBOOT_MODE is not set
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_SYSTEM_DATA_VERIFICATION is not set
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
-CONFIG_SYSTEM_TRUSTED_KEYS=""
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_T5403 is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TASKS_RCU is not set
-# CONFIG_TASK_XACCT is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TCG_ATMEL is not set
-# CONFIG_TCG_CRB is not set
-# CONFIG_TCG_INFINEON is not set
-# CONFIG_TCG_NSC is not set
-# CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_TIS_I2C_ATMEL is not set
-# CONFIG_TCG_TIS_I2C_INFINEON is not set
-# CONFIG_TCG_TIS_I2C_NUVOTON is not set
-# CONFIG_TCG_TIS_SPI is not set
-# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
-# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCG_VTPM_PROXY is not set
-# CONFIG_TCG_XEN is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BBR is not set
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CDG is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TCP_CONG_DCTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_NV is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TCS3414 is not set
-# CONFIG_TCS3472 is not set
-# CONFIG_TEGRA_AHB is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TERANETICS_PHY is not set
-# CONFIG_TEST_BITMAP is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_HASH is not set
-# CONFIG_TEST_HEXDUMP is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_TEST_PRINTF is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_STATIC_KEYS is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_USER_COPY is not set
-# CONFIG_TEST_UUID is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_BANG_BANG is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THERMAL_WRITABLE_TRIPS is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_THUNDERBOLT is not set
-# CONFIG_THUNDER_NIC_BGX is not set
-# CONFIG_THUNDER_NIC_PF is not set
-# CONFIG_THUNDER_NIC_RGX is not set
-# CONFIG_THUNDER_NIC_VF is not set
-# CONFIG_TICK_CPU_ACCOUNTING is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_TIMB_DMA is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMER_STATS is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TIPC is not set
-# CONFIG_TI_ADC081C is not set
-# CONFIG_TI_ADC0832 is not set
-# CONFIG_TI_ADC12138 is not set
-# CONFIG_TI_ADC128S052 is not set
-# CONFIG_TI_ADC161S626 is not set
-# CONFIG_TI_ADS1015 is not set
-# CONFIG_TI_ADS8688 is not set
-# CONFIG_TI_AM335X_ADC is not set
-# CONFIG_TI_CPSW is not set
-# CONFIG_TI_CPSW_ALE is not set
-# CONFIG_TI_CPTS is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TI_DAVINCI_CPDMA is not set
-# CONFIG_TI_DAVINCI_MDIO is not set
-# CONFIG_TI_ST is not set
-# CONFIG_TI_SYSCON_RESET is not set
-# CONFIG_TLAN is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMP006 is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TORTURE_TEST is not set
-# CONFIG_TOSHIBA_HAPS is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
-# CONFIG_TOUCHSCREEN_EKTF2127 is not set
-# CONFIG_TOUCHSCREEN_ELAN is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_FT6236 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GOODIX is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MMS114 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_RM_TS is not set
-# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_SILEAD is not set
-# CONFIG_TOUCHSCREEN_SIS_I2C is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_SUR40 is not set
-# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
-# CONFIG_TOUCHSCREEN_SX8654 is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-# CONFIG_TOUCHSCREEN_TSC2004 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_ZFORCE is not set
-# CONFIG_TPL0102 is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_TRACER_SNAPSHOT is not set
-# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_TRACE_ENUM_MAP_FILE is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TRACE_SINK is not set
-# CONFIG_TRACING_EVENTS_GPIO is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TRIM_UNUSED_KSYMS is not set
-# CONFIG_TRUSTED_KEYS is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2x7x is not set
-# CONFIG_TSL4531 is not set
-# CONFIG_TSYS01 is not set
-# CONFIG_TSYS02D is not set
-# CONFIG_TTPCI_EEPROM is not set
-CONFIG_TTY=y
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_TUN is not set
-# CONFIG_TUN_VNET_CROSS_LE is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL6030_GPADC is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
-# CONFIG_UBSAN is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UCSI is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UDF_NLS=y
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UHID is not set
-CONFIG_UID16=y
-# CONFIG_UIO is not set
-# CONFIG_ULTRA is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNIX_DIAG is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UPROBES is not set
-# CONFIG_UPROBE_EVENT is not set
-# CONFIG_US5182D is not set
-# CONFIG_USB is not set
-# CONFIG_USBIP_CORE is not set
-CONFIG_USBIP_VHCI_HC_PORTS=8
-CONFIG_USBIP_VHCI_NR_HCS=1
-# CONFIG_USBIP_VUDC is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AMD5536UDC is not set
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_BDC_UDC is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_CHAOSKEY is not set
-# CONFIG_USB_CHIPIDEA is not set
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_DEFAULT_PERSIST=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_DWC2 is not set
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_DUAL_ROLE is not set
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_PERIPHERAL is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_DWC3_EXYNOS is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_OF_SIMPLE is not set
-# CONFIG_USB_DWC3_PCI is not set
-# CONFIG_USB_DWC3_QCOM is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_EHCI_ATH79 is not set
-# CONFIG_USB_EHCI_HCD_AT91 is not set
-# CONFIG_USB_EHCI_HCD_OMAP is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_EHCI_MSM is not set
-# CONFIG_USB_EHCI_MV is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHSET_TEST_FIXTURE is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_EZUSB_FX2 is not set
-# CONFIG_USB_FOTG210_HCD is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GR_UDC is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_DTCS033 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STK1135 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TOUPTEK is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_G_WEBCAM is not set
-# CONFIG_USB_HCD_TEST_MODE is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HSIC_USB3503 is not set
-# CONFIG_USB_HSIC_USB4604 is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1301 is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760 is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_LAN78XX is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
-# CONFIG_USB_LED_TRIG is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LINK_LAYER_TEST is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MAX3421_HCD is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MSM_OTG is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MXS_PHY is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_MBIM is not set
-# CONFIG_USB_NET_CDC_NCM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_CH9200 is not set
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_DRIVERS is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_SR9700 is not set
-# CONFIG_USB_NET_SR9800 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHY is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RCAR_PHY is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MXUPORT is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QT2 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SIMPLE is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_WISHBONE is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_ULPI_BUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VL600 is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YUREX is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USELIB is not set
-# CONFIG_USERFAULTFD is not set
-# CONFIG_USE_OF is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_U_SERIAL_CONSOLE is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_V4L_TEST_DRIVERS is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_VDSO is not set
-# CONFIG_VEML6070 is not set
-# CONFIG_VETH is not set
-# CONFIG_VEXPRESS_CONFIG is not set
-# CONFIG_VF610_ADC is not set
-# CONFIG_VF610_DAC is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
-# CONFIG_VHOST_NET is not set
-# CONFIG_VHOST_VSOCK is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV7393 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_AK881X is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CS3308 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DT3155 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_ML86V7667 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9M111 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_NOON010PC30 is not set
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OV2659 is not set
-# CONFIG_VIDEO_OV7640 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA6752HS is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_SONY_BTF_MPX is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_THS8200 is not set
-# CONFIG_VIDEO_TIMBERDALE is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TM6000 is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_TW2804 is not set
-# CONFIG_VIDEO_TW9903 is not set
-# CONFIG_VIDEO_TW9906 is not set
-# CONFIG_VIDEO_UDA1342 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBTV is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_INPUT is not set
-# CONFIG_VIRTIO_MMIO is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
-# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VLAN_8021Q_MVRP is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_PVSCSI is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VOP_BUS is not set
-# CONFIG_VORTEX is not set
-# CONFIG_VSOCKETS is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_VXGE is not set
-# CONFIG_VXLAN is not set
-# CONFIG_VZ89X is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_W1_SLAVE_DS2406 is not set
-# CONFIG_W1_SLAVE_DS2408 is not set
-# CONFIG_W1_SLAVE_DS2413 is not set
-# CONFIG_W1_SLAVE_DS2423 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_DS2780 is not set
-# CONFIG_W1_SLAVE_DS2781 is not set
-# CONFIG_W1_SLAVE_DS28E04 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_CORE is not set
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
-# CONFIG_WATCHDOG_SYSFS is not set
-# CONFIG_WD80x3 is not set
-# CONFIG_WDAT_WDT is not set
-# CONFIG_WDTPCI is not set
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PRIV=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WILINK_PLATFORM_DATA=y
-# CONFIG_WIMAX is not set
-# CONFIG_WIMAX_GDM72XX is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIZNET_W5100 is not set
-# CONFIG_WIZNET_W5300 is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_WL18XX is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_VENDOR_ADMTEK is not set
-# CONFIG_WLAN_VENDOR_ATH is not set
-# CONFIG_WLAN_VENDOR_ATMEL is not set
-# CONFIG_WLAN_VENDOR_BROADCOM is not set
-# CONFIG_WLAN_VENDOR_CISCO is not set
-# CONFIG_WLAN_VENDOR_INTEL is not set
-# CONFIG_WLAN_VENDOR_INTERSIL is not set
-# CONFIG_WLAN_VENDOR_MARVELL is not set
-# CONFIG_WLAN_VENDOR_MEDIATEK is not set
-# CONFIG_WLAN_VENDOR_RALINK is not set
-# CONFIG_WLAN_VENDOR_REALTEK is not set
-# CONFIG_WLAN_VENDOR_RSI is not set
-# CONFIG_WLAN_VENDOR_ST is not set
-# CONFIG_WLAN_VENDOR_TI is not set
-# CONFIG_WLAN_VENDOR_ZYDAS is not set
-# CONFIG_WLCORE is not set
-# CONFIG_WL_MEDIATEK is not set
-CONFIG_WL_TI=y
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-# CONFIG_WQ_WATCHDOG is not set
-# CONFIG_X25 is not set
-# CONFIG_X509_CERTIFICATE_PARSER is not set
-# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
-# CONFIG_X86_PKG_TEMP_THERMAL is not set
-CONFIG_X86_SYSFB=y
-# CONFIG_XEN is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_WARN is not set
-# CONFIG_XILINX_AXI_EMAC is not set
-# CONFIG_XILINX_DMA is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_GMII2RGMII is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_WATCHDOG is not set
-# CONFIG_XILINX_ZYNQMP_DMA is not set
-# CONFIG_XILLYBUS is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_XMON is not set
-CONFIG_XZ_DEC=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
-# CONFIG_XZ_DEC_BCJ is not set
-# CONFIG_XZ_DEC_IA64 is not set
-# CONFIG_XZ_DEC_POWERPC is not set
-# CONFIG_XZ_DEC_SPARC is not set
-# CONFIG_XZ_DEC_TEST is not set
-# CONFIG_XZ_DEC_X86 is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZBUD is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZIIRAVE_WATCHDOG is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_ZLIB_INFLATE is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_ZPA2326 is not set
-# CONFIG_ZPOOL is not set
-# CONFIG_ZRAM is not set
-# CONFIG_ZSMALLOC is not set
diff --git a/target/linux/generic/hack-4.19/204-module_strip.patch b/target/linux/generic/hack-4.19/204-module_strip.patch
deleted file mode 100644
index c0650b3670..0000000000
--- a/target/linux/generic/hack-4.19/204-module_strip.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From a779a482fb9b9f8fcdf8b2519c789b4b9bb5dd05 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:56:48 +0200
-Subject: build: add a hack for removing non-essential module info
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/module.h      | 13 ++++++++-----
- include/linux/moduleparam.h | 15 ++++++++++++---
- init/Kconfig                |  7 +++++++
- kernel/module.c             |  5 ++++-
- scripts/mod/modpost.c       | 12 ++++++++++++
- 5 files changed, 43 insertions(+), 9 deletions(-)
-
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -160,6 +160,7 @@ extern void cleanup_module(void);
- 
- /* Generic info of form tag = "info" */
- #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
-+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
- 
- /* For userspace: you can also call me... */
- #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
-@@ -203,12 +204,12 @@ extern void cleanup_module(void);
-  * Author(s), use "Name <email>" or just "Name", for multiple
-  * authors use multiple MODULE_AUTHOR() statements/lines.
-  */
--#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
-+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
- 
- /* What your module does. */
--#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
- 
--#ifdef MODULE
-+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
- /* Creates an alias so file2alias.c can find device table. */
- #define MODULE_DEVICE_TABLE(type, name)					\
- extern typeof(name) __mod_##type##__##name##_device_table		\
-@@ -235,7 +236,9 @@ extern typeof(name) __mod_##type##__##na
-  */
- 
- #if defined(MODULE) || !defined(CONFIG_SYSFS)
--#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
-+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
-+#elif defined(CONFIG_MODULE_STRIPPED)
-+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
- #else
- #define MODULE_VERSION(_version)					\
- 	static struct module_version_attribute ___modver_attr = {	\
-@@ -257,7 +260,7 @@ extern typeof(name) __mod_##type##__##na
- /* Optional firmware file (or files) needed by the module
-  * format is simply firmware file name.  Multiple firmware
-  * files require multiple MODULE_FIRMWARE() specifiers */
--#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
-+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
- 
- struct notifier_block;
- 
---- a/include/linux/moduleparam.h
-+++ b/include/linux/moduleparam.h
-@@ -17,6 +17,16 @@
- /* Chosen so that structs with an unsigned long line up. */
- #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
- 
-+/* This struct is here for syntactic coherency, it is not used */
-+#define __MODULE_INFO_DISABLED(name)					  \
-+  struct __UNIQUE_ID(name) {}
-+
-+#ifdef CONFIG_MODULE_STRIPPED
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
-+#else
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
-+#endif
-+
- #ifdef MODULE
- #define __MODULE_INFO(tag, name, info)					  \
- static const char __UNIQUE_ID(name)[]					  \
-@@ -24,8 +34,7 @@ static const char __UNIQUE_ID(name)[]
-   = __stringify(tag) "=" info
- #else  /* !MODULE */
- /* This struct is here for syntactic coherency, it is not used */
--#define __MODULE_INFO(tag, name, info)					  \
--  struct __UNIQUE_ID(name) {}
-+#define __MODULE_INFO(tag, name, info) __MODULE_INFO_DISABLED(name)
- #endif
- #define __MODULE_PARM_TYPE(name, _type)					  \
-   __MODULE_INFO(parmtype, name##type, #name ":" _type)
-@@ -33,7 +42,7 @@ static const char __UNIQUE_ID(name)[]
- /* One for each parameter, describing how to use it.  Some files do
-    multiple of these per line, so can't just use MODULE_INFO. */
- #define MODULE_PARM_DESC(_parm, desc) \
--	__MODULE_INFO(parm, _parm, #_parm ":" desc)
-+	__MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
- 
- struct kernel_param;
- 
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1997,6 +1997,13 @@ config TRIM_UNUSED_KSYMS
- 
- 	  If unsure, or if you need to build out-of-tree modules, say N.
- 
-+config MODULE_STRIPPED
-+	bool "Reduce module size"
-+	depends on MODULES
-+	help
-+	  Remove module parameter descriptions, author info, version, aliases,
-+	  device tables, etc.
-+
- endif # MODULES
- 
- config MODULES_TREE_LOOKUP
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -3009,9 +3009,11 @@ static int setup_load_info(struct load_i
- 
- static int check_modinfo(struct module *mod, struct load_info *info, int flags)
- {
--	const char *modmagic = get_modinfo(info, "vermagic");
- 	int err;
- 
-+#ifndef CONFIG_MODULE_STRIPPED
-+	const char *modmagic = get_modinfo(info, "vermagic");
-+
- 	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
- 		modmagic = NULL;
- 
-@@ -3032,6 +3034,7 @@ static int check_modinfo(struct module *
- 				mod->name);
- 		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
- 	}
-+#endif
- 
- 	check_modinfo_retpoline(mod, info);
- 
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -1971,7 +1971,9 @@ static void read_symbols(const char *mod
- 		symname = remove_dot(info.strtab + sym->st_name);
- 
- 		handle_modversions(mod, &info, sym, symname);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		handle_moddevtable(mod, &info, sym, symname);
-+#endif
- 	}
- 	if (!is_vmlinux(modname) || vmlinux_section_warnings)
- 		check_sec_ref(mod, modname, &info);
-@@ -2134,8 +2136,10 @@ static void add_header(struct buffer *b,
- 	buf_printf(b, "\n");
- 	buf_printf(b, "BUILD_SALT;\n");
- 	buf_printf(b, "\n");
-+#ifndef CONFIG_MODULE_STRIPPED
- 	buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
- 	buf_printf(b, "MODULE_INFO(name, KBUILD_MODNAME);\n");
-+#endif
- 	buf_printf(b, "\n");
- 	buf_printf(b, "__visible struct module __this_module\n");
- 	buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
-@@ -2152,8 +2156,10 @@ static void add_header(struct buffer *b,
- 
- static void add_intree_flag(struct buffer *b, int is_intree)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (is_intree)
- 		buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
-+#endif
- }
- 
- /* Cannot check for assembler */
-@@ -2166,8 +2172,10 @@ static void add_retpoline(struct buffer
- 
- static void add_staging_flag(struct buffer *b, const char *name)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (strstarts(name, "drivers/staging"))
- 		buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
-+#endif
- }
- 
- /**
-@@ -2266,11 +2274,13 @@ static void add_depends(struct buffer *b
- 
- static void add_srcversion(struct buffer *b, struct module *mod)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (mod->srcversion[0]) {
- 		buf_printf(b, "\n");
- 		buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
- 			   mod->srcversion);
- 	}
-+#endif
- }
- 
- static void write_if_changed(struct buffer *b, const char *fname)
-@@ -2507,7 +2517,9 @@ int main(int argc, char **argv)
- 		add_staging_flag(&buf, mod->name);
- 		err |= add_versions(&buf, mod);
- 		add_depends(&buf, mod, modules);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		add_moddevtable(&buf, mod);
-+#endif
- 		add_srcversion(&buf, mod);
- 
- 		sprintf(fname, "%s.mod.c", mod->name);
diff --git a/target/linux/generic/hack-4.19/207-disable-modorder.patch b/target/linux/generic/hack-4.19/207-disable-modorder.patch
deleted file mode 100644
index 7d7b6a8dfb..0000000000
--- a/target/linux/generic/hack-4.19/207-disable-modorder.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From c9ef4ab0f54356ee9f91d9676ea0ec123840ddc7 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:57:33 +0200
-Subject: kernel: do not build modules.order
-
-It is not needed for anything on the system and skipping this saves some
-build time, especially in cases where there is nothing to do.
-
-lede-commit: afc1675833a7bf5df094f59f7250369520646d04
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile               | 2 --
- scripts/Makefile.build | 2 +-
- 2 files changed, 1 insertion(+), 3 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -1224,7 +1224,6 @@ all: modules
- 
- PHONY += modules
- modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
--	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
- 	@$(kecho) '  Building modules, stage 2.';
- 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
- 
-@@ -1253,7 +1252,6 @@ _modinst_:
- 		rm -f $(MODLIB)/build ; \
- 		ln -s $(CURDIR) $(MODLIB)/build ; \
- 	fi
--	@cp -f $(objtree)/modules.order $(MODLIB)/
- 	@cp -f $(objtree)/modules.builtin $(MODLIB)/
- 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
- 
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -78,7 +78,7 @@ modorder-target := $(obj)/modules.order
- # We keep a list of all modules in $(MODVERDIR)
- 
- __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
--	 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
-+	 $(if $(KBUILD_MODULES),$(obj-m)) \
- 	 $(subdir-ym) $(always)
- 	@:
- 
diff --git a/target/linux/generic/hack-4.19/210-darwin_scripts_include.patch b/target/linux/generic/hack-4.19/210-darwin_scripts_include.patch
deleted file mode 100644
index be6adc0d11..0000000000
--- a/target/linux/generic/hack-4.19/210-darwin_scripts_include.patch
+++ /dev/null
@@ -1,3053 +0,0 @@
-From db7c30dcd9a0391bf13b62c9f91e144d762ef43a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 7 Jul 2017 17:00:49 +0200
-Subject: Add an OSX specific patch to make the kernel be compiled
-
-lede-commit: 3fc2a24f0422b2f55f9ed43f116db3111f700526
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- scripts/kconfig/Makefile   |    3 +
- scripts/mod/elf.h          | 3007 ++++++++++++++++++++++++++++++++++++++++++++
- scripts/mod/mk_elfconfig.c |    4 +
- scripts/mod/modpost.h      |    4 +
- 4 files changed, 3018 insertions(+)
- create mode 100644 scripts/mod/elf.h
-
---- /dev/null
-+++ b/scripts/mod/elf.h
-@@ -0,0 +1,3007 @@
-+/* This file defines standard ELF types, structures, and macros.
-+   Copyright (C) 1995-2012 Free Software Foundation, Inc.
-+   This file is part of the GNU C Library.
-+
-+   The GNU C Library is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU Lesser General Public
-+   License as published by the Free Software Foundation; either
-+   version 2.1 of the License, or (at your option) any later version.
-+
-+   The GNU C Library is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+   Lesser General Public License for more details.
-+
-+   You should have received a copy of the GNU Lesser General Public
-+   License along with the GNU C Library; if not, see
-+   <http://www.gnu.org/licenses/>.  */
-+
-+#ifndef _ELF_H
-+#define	_ELF_H 1
-+
-+/* Standard ELF types.  */
-+
-+#include <stdint.h>
-+
-+/* Type for a 16-bit quantity.  */
-+typedef uint16_t Elf32_Half;
-+typedef uint16_t Elf64_Half;
-+
-+/* Types for signed and unsigned 32-bit quantities.  */
-+typedef uint32_t Elf32_Word;
-+typedef	int32_t  Elf32_Sword;
-+typedef uint32_t Elf64_Word;
-+typedef	int32_t  Elf64_Sword;
-+
-+/* Types for signed and unsigned 64-bit quantities.  */
-+typedef uint64_t Elf32_Xword;
-+typedef	int64_t  Elf32_Sxword;
-+typedef uint64_t Elf64_Xword;
-+typedef	int64_t  Elf64_Sxword;
-+
-+/* Type of addresses.  */
-+typedef uint32_t Elf32_Addr;
-+typedef uint64_t Elf64_Addr;
-+
-+/* Type of file offsets.  */
-+typedef uint32_t Elf32_Off;
-+typedef uint64_t Elf64_Off;
-+
-+/* Type for section indices, which are 16-bit quantities.  */
-+typedef uint16_t Elf32_Section;
-+typedef uint16_t Elf64_Section;
-+
-+/* Type for version symbol information.  */
-+typedef Elf32_Half Elf32_Versym;
-+typedef Elf64_Half Elf64_Versym;
-+
-+
-+/* The ELF file header.  This appears at the start of every ELF file.  */
-+
-+#define EI_NIDENT (16)
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf32_Half	e_type;			/* Object file type */
-+  Elf32_Half	e_machine;		/* Architecture */
-+  Elf32_Word	e_version;		/* Object file version */
-+  Elf32_Addr	e_entry;		/* Entry point virtual address */
-+  Elf32_Off	e_phoff;		/* Program header table file offset */
-+  Elf32_Off	e_shoff;		/* Section header table file offset */
-+  Elf32_Word	e_flags;		/* Processor-specific flags */
-+  Elf32_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf32_Half	e_phentsize;		/* Program header table entry size */
-+  Elf32_Half	e_phnum;		/* Program header table entry count */
-+  Elf32_Half	e_shentsize;		/* Section header table entry size */
-+  Elf32_Half	e_shnum;		/* Section header table entry count */
-+  Elf32_Half	e_shstrndx;		/* Section header string table index */
-+} Elf32_Ehdr;
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf64_Half	e_type;			/* Object file type */
-+  Elf64_Half	e_machine;		/* Architecture */
-+  Elf64_Word	e_version;		/* Object file version */
-+  Elf64_Addr	e_entry;		/* Entry point virtual address */
-+  Elf64_Off	e_phoff;		/* Program header table file offset */
-+  Elf64_Off	e_shoff;		/* Section header table file offset */
-+  Elf64_Word	e_flags;		/* Processor-specific flags */
-+  Elf64_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf64_Half	e_phentsize;		/* Program header table entry size */
-+  Elf64_Half	e_phnum;		/* Program header table entry count */
-+  Elf64_Half	e_shentsize;		/* Section header table entry size */
-+  Elf64_Half	e_shnum;		/* Section header table entry count */
-+  Elf64_Half	e_shstrndx;		/* Section header string table index */
-+} Elf64_Ehdr;
-+
-+/* Fields in the e_ident array.  The EI_* macros are indices into the
-+   array.  The macros under each EI_* macro are the values the byte
-+   may have.  */
-+
-+#define EI_MAG0		0		/* File identification byte 0 index */
-+#define ELFMAG0		0x7f		/* Magic number byte 0 */
-+
-+#define EI_MAG1		1		/* File identification byte 1 index */
-+#define ELFMAG1		'E'		/* Magic number byte 1 */
-+
-+#define EI_MAG2		2		/* File identification byte 2 index */
-+#define ELFMAG2		'L'		/* Magic number byte 2 */
-+
-+#define EI_MAG3		3		/* File identification byte 3 index */
-+#define ELFMAG3		'F'		/* Magic number byte 3 */
-+
-+/* Conglomeration of the identification bytes, for easy testing as a word.  */
-+#define	ELFMAG		"\177ELF"
-+#define	SELFMAG		4
-+
-+#define EI_CLASS	4		/* File class byte index */
-+#define ELFCLASSNONE	0		/* Invalid class */
-+#define ELFCLASS32	1		/* 32-bit objects */
-+#define ELFCLASS64	2		/* 64-bit objects */
-+#define ELFCLASSNUM	3
-+
-+#define EI_DATA		5		/* Data encoding byte index */
-+#define ELFDATANONE	0		/* Invalid data encoding */
-+#define ELFDATA2LSB	1		/* 2's complement, little endian */
-+#define ELFDATA2MSB	2		/* 2's complement, big endian */
-+#define ELFDATANUM	3
-+
-+#define EI_VERSION	6		/* File version byte index */
-+					/* Value must be EV_CURRENT */
-+
-+#define EI_OSABI	7		/* OS ABI identification */
-+#define ELFOSABI_NONE		0	/* UNIX System V ABI */
-+#define ELFOSABI_SYSV		0	/* Alias.  */
-+#define ELFOSABI_HPUX		1	/* HP-UX */
-+#define ELFOSABI_NETBSD		2	/* NetBSD.  */
-+#define ELFOSABI_GNU		3	/* Object uses GNU ELF extensions.  */
-+#define ELFOSABI_LINUX		ELFOSABI_GNU /* Compatibility alias.  */
-+#define ELFOSABI_SOLARIS	6	/* Sun Solaris.  */
-+#define ELFOSABI_AIX		7	/* IBM AIX.  */
-+#define ELFOSABI_IRIX		8	/* SGI Irix.  */
-+#define ELFOSABI_FREEBSD	9	/* FreeBSD.  */
-+#define ELFOSABI_TRU64		10	/* Compaq TRU64 UNIX.  */
-+#define ELFOSABI_MODESTO	11	/* Novell Modesto.  */
-+#define ELFOSABI_OPENBSD	12	/* OpenBSD.  */
-+#define ELFOSABI_ARM_AEABI	64	/* ARM EABI */
-+#define ELFOSABI_ARM		97	/* ARM */
-+#define ELFOSABI_STANDALONE	255	/* Standalone (embedded) application */
-+
-+#define EI_ABIVERSION	8		/* ABI version */
-+
-+#define EI_PAD		9		/* Byte index of padding bytes */
-+
-+/* Legal values for e_type (object file type).  */
-+
-+#define ET_NONE		0		/* No file type */
-+#define ET_REL		1		/* Relocatable file */
-+#define ET_EXEC		2		/* Executable file */
-+#define ET_DYN		3		/* Shared object file */
-+#define ET_CORE		4		/* Core file */
-+#define	ET_NUM		5		/* Number of defined types */
-+#define ET_LOOS		0xfe00		/* OS-specific range start */
-+#define ET_HIOS		0xfeff		/* OS-specific range end */
-+#define ET_LOPROC	0xff00		/* Processor-specific range start */
-+#define ET_HIPROC	0xffff		/* Processor-specific range end */
-+
-+/* Legal values for e_machine (architecture).  */
-+
-+#define EM_NONE		 0		/* No machine */
-+#define EM_M32		 1		/* AT&T WE 32100 */
-+#define EM_SPARC	 2		/* SUN SPARC */
-+#define EM_386		 3		/* Intel 80386 */
-+#define EM_68K		 4		/* Motorola m68k family */
-+#define EM_88K		 5		/* Motorola m88k family */
-+#define EM_860		 7		/* Intel 80860 */
-+#define EM_MIPS		 8		/* MIPS R3000 big-endian */
-+#define EM_S370		 9		/* IBM System/370 */
-+#define EM_MIPS_RS3_LE	10		/* MIPS R3000 little-endian */
-+
-+#define EM_PARISC	15		/* HPPA */
-+#define EM_VPP500	17		/* Fujitsu VPP500 */
-+#define EM_SPARC32PLUS	18		/* Sun's "v8plus" */
-+#define EM_960		19		/* Intel 80960 */
-+#define EM_PPC		20		/* PowerPC */
-+#define EM_PPC64	21		/* PowerPC 64-bit */
-+#define EM_S390		22		/* IBM S390 */
-+
-+#define EM_V800		36		/* NEC V800 series */
-+#define EM_FR20		37		/* Fujitsu FR20 */
-+#define EM_RH32		38		/* TRW RH-32 */
-+#define EM_RCE		39		/* Motorola RCE */
-+#define EM_ARM		40		/* ARM */
-+#define EM_FAKE_ALPHA	41		/* Digital Alpha */
-+#define EM_SH		42		/* Hitachi SH */
-+#define EM_SPARCV9	43		/* SPARC v9 64-bit */
-+#define EM_TRICORE	44		/* Siemens Tricore */
-+#define EM_ARC		45		/* Argonaut RISC Core */
-+#define EM_H8_300	46		/* Hitachi H8/300 */
-+#define EM_H8_300H	47		/* Hitachi H8/300H */
-+#define EM_H8S		48		/* Hitachi H8S */
-+#define EM_H8_500	49		/* Hitachi H8/500 */
-+#define EM_IA_64	50		/* Intel Merced */
-+#define EM_MIPS_X	51		/* Stanford MIPS-X */
-+#define EM_COLDFIRE	52		/* Motorola Coldfire */
-+#define EM_68HC12	53		/* Motorola M68HC12 */
-+#define EM_MMA		54		/* Fujitsu MMA Multimedia Accelerator*/
-+#define EM_PCP		55		/* Siemens PCP */
-+#define EM_NCPU		56		/* Sony nCPU embeeded RISC */
-+#define EM_NDR1		57		/* Denso NDR1 microprocessor */
-+#define EM_STARCORE	58		/* Motorola Start*Core processor */
-+#define EM_ME16		59		/* Toyota ME16 processor */
-+#define EM_ST100	60		/* STMicroelectronic ST100 processor */
-+#define EM_TINYJ	61		/* Advanced Logic Corp. Tinyj emb.fam*/
-+#define EM_X86_64	62		/* AMD x86-64 architecture */
-+#define EM_PDSP		63		/* Sony DSP Processor */
-+
-+#define EM_FX66		66		/* Siemens FX66 microcontroller */
-+#define EM_ST9PLUS	67		/* STMicroelectronics ST9+ 8/16 mc */
-+#define EM_ST7		68		/* STmicroelectronics ST7 8 bit mc */
-+#define EM_68HC16	69		/* Motorola MC68HC16 microcontroller */
-+#define EM_68HC11	70		/* Motorola MC68HC11 microcontroller */
-+#define EM_68HC08	71		/* Motorola MC68HC08 microcontroller */
-+#define EM_68HC05	72		/* Motorola MC68HC05 microcontroller */
-+#define EM_SVX		73		/* Silicon Graphics SVx */
-+#define EM_ST19		74		/* STMicroelectronics ST19 8 bit mc */
-+#define EM_VAX		75		/* Digital VAX */
-+#define EM_CRIS		76		/* Axis Communications 32-bit embedded processor */
-+#define EM_JAVELIN	77		/* Infineon Technologies 32-bit embedded processor */
-+#define EM_FIREPATH	78		/* Element 14 64-bit DSP Processor */
-+#define EM_ZSP		79		/* LSI Logic 16-bit DSP Processor */
-+#define EM_MMIX		80		/* Donald Knuth's educational 64-bit processor */
-+#define EM_HUANY	81		/* Harvard University machine-independent object files */
-+#define EM_PRISM	82		/* SiTera Prism */
-+#define EM_AVR		83		/* Atmel AVR 8-bit microcontroller */
-+#define EM_FR30		84		/* Fujitsu FR30 */
-+#define EM_D10V		85		/* Mitsubishi D10V */
-+#define EM_D30V		86		/* Mitsubishi D30V */
-+#define EM_V850		87		/* NEC v850 */
-+#define EM_M32R		88		/* Mitsubishi M32R */
-+#define EM_MN10300	89		/* Matsushita MN10300 */
-+#define EM_MN10200	90		/* Matsushita MN10200 */
-+#define EM_PJ		91		/* picoJava */
-+#define EM_OPENRISC	92		/* OpenRISC 32-bit embedded processor */
-+#define EM_ARC_A5	93		/* ARC Cores Tangent-A5 */
-+#define EM_XTENSA	94		/* Tensilica Xtensa Architecture */
-+#define EM_TILEPRO	188		/* Tilera TILEPro */
-+#define EM_TILEGX	191		/* Tilera TILE-Gx */
-+#define EM_NUM		192
-+
-+/* If it is necessary to assign new unofficial EM_* values, please
-+   pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
-+   chances of collision with official or non-GNU unofficial values.  */
-+
-+#define EM_ALPHA	0x9026
-+
-+/* Legal values for e_version (version).  */
-+
-+#define EV_NONE		0		/* Invalid ELF version */
-+#define EV_CURRENT	1		/* Current version */
-+#define EV_NUM		2
-+
-+/* Section header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf32_Word	sh_type;		/* Section type */
-+  Elf32_Word	sh_flags;		/* Section flags */
-+  Elf32_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf32_Off	sh_offset;		/* Section file offset */
-+  Elf32_Word	sh_size;		/* Section size in bytes */
-+  Elf32_Word	sh_link;		/* Link to another section */
-+  Elf32_Word	sh_info;		/* Additional section information */
-+  Elf32_Word	sh_addralign;		/* Section alignment */
-+  Elf32_Word	sh_entsize;		/* Entry size if section holds table */
-+} Elf32_Shdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf64_Word	sh_type;		/* Section type */
-+  Elf64_Xword	sh_flags;		/* Section flags */
-+  Elf64_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf64_Off	sh_offset;		/* Section file offset */
-+  Elf64_Xword	sh_size;		/* Section size in bytes */
-+  Elf64_Word	sh_link;		/* Link to another section */
-+  Elf64_Word	sh_info;		/* Additional section information */
-+  Elf64_Xword	sh_addralign;		/* Section alignment */
-+  Elf64_Xword	sh_entsize;		/* Entry size if section holds table */
-+} Elf64_Shdr;
-+
-+/* Special section indices.  */
-+
-+#define SHN_UNDEF	0		/* Undefined section */
-+#define SHN_LORESERVE	0xff00		/* Start of reserved indices */
-+#define SHN_LOPROC	0xff00		/* Start of processor-specific */
-+#define SHN_BEFORE	0xff00		/* Order section before all others
-+					   (Solaris).  */
-+#define SHN_AFTER	0xff01		/* Order section after all others
-+					   (Solaris).  */
-+#define SHN_HIPROC	0xff1f		/* End of processor-specific */
-+#define SHN_LOOS	0xff20		/* Start of OS-specific */
-+#define SHN_HIOS	0xff3f		/* End of OS-specific */
-+#define SHN_ABS		0xfff1		/* Associated symbol is absolute */
-+#define SHN_COMMON	0xfff2		/* Associated symbol is common */
-+#define SHN_XINDEX	0xffff		/* Index is in extra table.  */
-+#define SHN_HIRESERVE	0xffff		/* End of reserved indices */
-+
-+/* Legal values for sh_type (section type).  */
-+
-+#define SHT_NULL	  0		/* Section header table entry unused */
-+#define SHT_PROGBITS	  1		/* Program data */
-+#define SHT_SYMTAB	  2		/* Symbol table */
-+#define SHT_STRTAB	  3		/* String table */
-+#define SHT_RELA	  4		/* Relocation entries with addends */
-+#define SHT_HASH	  5		/* Symbol hash table */
-+#define SHT_DYNAMIC	  6		/* Dynamic linking information */
-+#define SHT_NOTE	  7		/* Notes */
-+#define SHT_NOBITS	  8		/* Program space with no data (bss) */
-+#define SHT_REL		  9		/* Relocation entries, no addends */
-+#define SHT_SHLIB	  10		/* Reserved */
-+#define SHT_DYNSYM	  11		/* Dynamic linker symbol table */
-+#define SHT_INIT_ARRAY	  14		/* Array of constructors */
-+#define SHT_FINI_ARRAY	  15		/* Array of destructors */
-+#define SHT_PREINIT_ARRAY 16		/* Array of pre-constructors */
-+#define SHT_GROUP	  17		/* Section group */
-+#define SHT_SYMTAB_SHNDX  18		/* Extended section indeces */
-+#define	SHT_NUM		  19		/* Number of defined types.  */
-+#define SHT_LOOS	  0x60000000	/* Start OS-specific.  */
-+#define SHT_GNU_ATTRIBUTES 0x6ffffff5	/* Object attributes.  */
-+#define SHT_GNU_HASH	  0x6ffffff6	/* GNU-style hash table.  */
-+#define SHT_GNU_LIBLIST	  0x6ffffff7	/* Prelink library list */
-+#define SHT_CHECKSUM	  0x6ffffff8	/* Checksum for DSO content.  */
-+#define SHT_LOSUNW	  0x6ffffffa	/* Sun-specific low bound.  */
-+#define SHT_SUNW_move	  0x6ffffffa
-+#define SHT_SUNW_COMDAT   0x6ffffffb
-+#define SHT_SUNW_syminfo  0x6ffffffc
-+#define SHT_GNU_verdef	  0x6ffffffd	/* Version definition section.  */
-+#define SHT_GNU_verneed	  0x6ffffffe	/* Version needs section.  */
-+#define SHT_GNU_versym	  0x6fffffff	/* Version symbol table.  */
-+#define SHT_HISUNW	  0x6fffffff	/* Sun-specific high bound.  */
-+#define SHT_HIOS	  0x6fffffff	/* End OS-specific type */
-+#define SHT_LOPROC	  0x70000000	/* Start of processor-specific */
-+#define SHT_HIPROC	  0x7fffffff	/* End of processor-specific */
-+#define SHT_LOUSER	  0x80000000	/* Start of application-specific */
-+#define SHT_HIUSER	  0x8fffffff	/* End of application-specific */
-+
-+/* Legal values for sh_flags (section flags).  */
-+
-+#define SHF_WRITE	     (1 << 0)	/* Writable */
-+#define SHF_ALLOC	     (1 << 1)	/* Occupies memory during execution */
-+#define SHF_EXECINSTR	     (1 << 2)	/* Executable */
-+#define SHF_MERGE	     (1 << 4)	/* Might be merged */
-+#define SHF_STRINGS	     (1 << 5)	/* Contains nul-terminated strings */
-+#define SHF_INFO_LINK	     (1 << 6)	/* `sh_info' contains SHT index */
-+#define SHF_LINK_ORDER	     (1 << 7)	/* Preserve order after combining */
-+#define SHF_OS_NONCONFORMING (1 << 8)	/* Non-standard OS specific handling
-+					   required */
-+#define SHF_GROUP	     (1 << 9)	/* Section is member of a group.  */
-+#define SHF_TLS		     (1 << 10)	/* Section hold thread-local data.  */
-+#define SHF_MASKOS	     0x0ff00000	/* OS-specific.  */
-+#define SHF_MASKPROC	     0xf0000000	/* Processor-specific */
-+#define SHF_ORDERED	     (1 << 30)	/* Special ordering requirement
-+					   (Solaris).  */
-+#define SHF_EXCLUDE	     (1 << 31)	/* Section is excluded unless
-+					   referenced or allocated (Solaris).*/
-+
-+/* Section group handling.  */
-+#define GRP_COMDAT	0x1		/* Mark group as COMDAT.  */
-+
-+/* Symbol table entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	st_name;		/* Symbol name (string tbl index) */
-+  Elf32_Addr	st_value;		/* Symbol value */
-+  Elf32_Word	st_size;		/* Symbol size */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char	st_other;		/* Symbol visibility */
-+  Elf32_Section	st_shndx;		/* Section index */
-+} Elf32_Sym;
-+
-+typedef struct
-+{
-+  Elf64_Word	st_name;		/* Symbol name (string tbl index) */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char st_other;		/* Symbol visibility */
-+  Elf64_Section	st_shndx;		/* Section index */
-+  Elf64_Addr	st_value;		/* Symbol value */
-+  Elf64_Xword	st_size;		/* Symbol size */
-+} Elf64_Sym;
-+
-+/* The syminfo section if available contains additional information about
-+   every dynamic symbol.  */
-+
-+typedef struct
-+{
-+  Elf32_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf32_Half si_flags;			/* Per symbol flags */
-+} Elf32_Syminfo;
-+
-+typedef struct
-+{
-+  Elf64_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf64_Half si_flags;			/* Per symbol flags */
-+} Elf64_Syminfo;
-+
-+/* Possible values for si_boundto.  */
-+#define SYMINFO_BT_SELF		0xffff	/* Symbol bound to self */
-+#define SYMINFO_BT_PARENT	0xfffe	/* Symbol bound to parent */
-+#define SYMINFO_BT_LOWRESERVE	0xff00	/* Beginning of reserved entries */
-+
-+/* Possible bitmasks for si_flags.  */
-+#define SYMINFO_FLG_DIRECT	0x0001	/* Direct bound symbol */
-+#define SYMINFO_FLG_PASSTHRU	0x0002	/* Pass-thru symbol for translator */
-+#define SYMINFO_FLG_COPY	0x0004	/* Symbol is a copy-reloc */
-+#define SYMINFO_FLG_LAZYLOAD	0x0008	/* Symbol bound to object to be lazy
-+					   loaded */
-+/* Syminfo version values.  */
-+#define SYMINFO_NONE		0
-+#define SYMINFO_CURRENT		1
-+#define SYMINFO_NUM		2
-+
-+
-+/* How to extract and insert information held in the st_info field.  */
-+
-+#define ELF32_ST_BIND(val)		(((unsigned char) (val)) >> 4)
-+#define ELF32_ST_TYPE(val)		((val) & 0xf)
-+#define ELF32_ST_INFO(bind, type)	(((bind) << 4) + ((type) & 0xf))
-+
-+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field.  */
-+#define ELF64_ST_BIND(val)		ELF32_ST_BIND (val)
-+#define ELF64_ST_TYPE(val)		ELF32_ST_TYPE (val)
-+#define ELF64_ST_INFO(bind, type)	ELF32_ST_INFO ((bind), (type))
-+
-+/* Legal values for ST_BIND subfield of st_info (symbol binding).  */
-+
-+#define STB_LOCAL	0		/* Local symbol */
-+#define STB_GLOBAL	1		/* Global symbol */
-+#define STB_WEAK	2		/* Weak symbol */
-+#define	STB_NUM		3		/* Number of defined types.  */
-+#define STB_LOOS	10		/* Start of OS-specific */
-+#define STB_GNU_UNIQUE	10		/* Unique symbol.  */
-+#define STB_HIOS	12		/* End of OS-specific */
-+#define STB_LOPROC	13		/* Start of processor-specific */
-+#define STB_HIPROC	15		/* End of processor-specific */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_NOTYPE	0		/* Symbol type is unspecified */
-+#define STT_OBJECT	1		/* Symbol is a data object */
-+#define STT_FUNC	2		/* Symbol is a code object */
-+#define STT_SECTION	3		/* Symbol associated with a section */
-+#define STT_FILE	4		/* Symbol's name is file name */
-+#define STT_COMMON	5		/* Symbol is a common data object */
-+#define STT_TLS		6		/* Symbol is thread-local data object*/
-+#define	STT_NUM		7		/* Number of defined types.  */
-+#define STT_LOOS	10		/* Start of OS-specific */
-+#define STT_GNU_IFUNC	10		/* Symbol is indirect code object */
-+#define STT_HIOS	12		/* End of OS-specific */
-+#define STT_LOPROC	13		/* Start of processor-specific */
-+#define STT_HIPROC	15		/* End of processor-specific */
-+
-+
-+/* Symbol table indices are found in the hash buckets and chain table
-+   of a symbol hash table section.  This special index value indicates
-+   the end of a chain, meaning no further symbols are found in that bucket.  */
-+
-+#define STN_UNDEF	0		/* End of a chain.  */
-+
-+
-+/* How to extract and insert information held in the st_other field.  */
-+
-+#define ELF32_ST_VISIBILITY(o)	((o) & 0x03)
-+
-+/* For ELF64 the definitions are the same.  */
-+#define ELF64_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY (o)
-+
-+/* Symbol visibility specification encoded in the st_other field.  */
-+#define STV_DEFAULT	0		/* Default symbol visibility rules */
-+#define STV_INTERNAL	1		/* Processor specific hidden class */
-+#define STV_HIDDEN	2		/* Sym unavailable in other modules */
-+#define STV_PROTECTED	3		/* Not preemptible, not exported */
-+
-+
-+/* Relocation table entry without addend (in section of type SHT_REL).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+} Elf32_Rel;
-+
-+/* I have seen two different definitions of the Elf64_Rel and
-+   Elf64_Rela structures, so we'll leave them out until Novell (or
-+   whoever) gets their act together.  */
-+/* The following, at least, is used on Sparc v9, MIPS, and Alpha.  */
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+} Elf64_Rel;
-+
-+/* Relocation table entry with addend (in section of type SHT_RELA).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+  Elf32_Sword	r_addend;		/* Addend */
-+} Elf32_Rela;
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+  Elf64_Sxword	r_addend;		/* Addend */
-+} Elf64_Rela;
-+
-+/* How to extract and insert information held in the r_info field.  */
-+
-+#define ELF32_R_SYM(val)		((val) >> 8)
-+#define ELF32_R_TYPE(val)		((val) & 0xff)
-+#define ELF32_R_INFO(sym, type)		(((sym) << 8) + ((type) & 0xff))
-+
-+#define ELF64_R_SYM(i)			((i) >> 32)
-+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-+#define ELF64_R_INFO(sym,type)		((((Elf64_Xword) (sym)) << 32) + (type))
-+
-+/* Program segment header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	p_type;			/* Segment type */
-+  Elf32_Off	p_offset;		/* Segment file offset */
-+  Elf32_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf32_Addr	p_paddr;		/* Segment physical address */
-+  Elf32_Word	p_filesz;		/* Segment size in file */
-+  Elf32_Word	p_memsz;		/* Segment size in memory */
-+  Elf32_Word	p_flags;		/* Segment flags */
-+  Elf32_Word	p_align;		/* Segment alignment */
-+} Elf32_Phdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	p_type;			/* Segment type */
-+  Elf64_Word	p_flags;		/* Segment flags */
-+  Elf64_Off	p_offset;		/* Segment file offset */
-+  Elf64_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf64_Addr	p_paddr;		/* Segment physical address */
-+  Elf64_Xword	p_filesz;		/* Segment size in file */
-+  Elf64_Xword	p_memsz;		/* Segment size in memory */
-+  Elf64_Xword	p_align;		/* Segment alignment */
-+} Elf64_Phdr;
-+
-+/* Special value for e_phnum.  This indicates that the real number of
-+   program headers is too large to fit into e_phnum.  Instead the real
-+   value is in the field sh_info of section 0.  */
-+
-+#define PN_XNUM		0xffff
-+
-+/* Legal values for p_type (segment type).  */
-+
-+#define	PT_NULL		0		/* Program header table entry unused */
-+#define PT_LOAD		1		/* Loadable program segment */
-+#define PT_DYNAMIC	2		/* Dynamic linking information */
-+#define PT_INTERP	3		/* Program interpreter */
-+#define PT_NOTE		4		/* Auxiliary information */
-+#define PT_SHLIB	5		/* Reserved */
-+#define PT_PHDR		6		/* Entry for header table itself */
-+#define PT_TLS		7		/* Thread-local storage segment */
-+#define	PT_NUM		8		/* Number of defined types */
-+#define PT_LOOS		0x60000000	/* Start of OS-specific */
-+#define PT_GNU_EH_FRAME	0x6474e550	/* GCC .eh_frame_hdr segment */
-+#define PT_GNU_STACK	0x6474e551	/* Indicates stack executability */
-+#define PT_GNU_RELRO	0x6474e552	/* Read-only after relocation */
-+#define PT_LOSUNW	0x6ffffffa
-+#define PT_SUNWBSS	0x6ffffffa	/* Sun Specific segment */
-+#define PT_SUNWSTACK	0x6ffffffb	/* Stack segment */
-+#define PT_HISUNW	0x6fffffff
-+#define PT_HIOS		0x6fffffff	/* End of OS-specific */
-+#define PT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define PT_HIPROC	0x7fffffff	/* End of processor-specific */
-+
-+/* Legal values for p_flags (segment flags).  */
-+
-+#define PF_X		(1 << 0)	/* Segment is executable */
-+#define PF_W		(1 << 1)	/* Segment is writable */
-+#define PF_R		(1 << 2)	/* Segment is readable */
-+#define PF_MASKOS	0x0ff00000	/* OS-specific */
-+#define PF_MASKPROC	0xf0000000	/* Processor-specific */
-+
-+/* Legal values for note segment descriptor types for core files. */
-+
-+#define NT_PRSTATUS	1		/* Contains copy of prstatus struct */
-+#define NT_FPREGSET	2		/* Contains copy of fpregset struct */
-+#define NT_PRPSINFO	3		/* Contains copy of prpsinfo struct */
-+#define NT_PRXREG	4		/* Contains copy of prxregset struct */
-+#define NT_TASKSTRUCT	4		/* Contains copy of task structure */
-+#define NT_PLATFORM	5		/* String from sysinfo(SI_PLATFORM) */
-+#define NT_AUXV		6		/* Contains copy of auxv array */
-+#define NT_GWINDOWS	7		/* Contains copy of gwindows struct */
-+#define NT_ASRS		8		/* Contains copy of asrset struct */
-+#define NT_PSTATUS	10		/* Contains copy of pstatus struct */
-+#define NT_PSINFO	13		/* Contains copy of psinfo struct */
-+#define NT_PRCRED	14		/* Contains copy of prcred struct */
-+#define NT_UTSNAME	15		/* Contains copy of utsname struct */
-+#define NT_LWPSTATUS	16		/* Contains copy of lwpstatus struct */
-+#define NT_LWPSINFO	17		/* Contains copy of lwpinfo struct */
-+#define NT_PRFPXREG	20		/* Contains copy of fprxregset struct */
-+#define NT_PRXFPREG	0x46e62b7f	/* Contains copy of user_fxsr_struct */
-+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-+
-+/* Legal values for the note segment descriptor types for object files.  */
-+
-+#define NT_VERSION	1		/* Contains a version string.  */
-+
-+
-+/* Dynamic section entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Sword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf32_Word d_val;			/* Integer value */
-+      Elf32_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf32_Dyn;
-+
-+typedef struct
-+{
-+  Elf64_Sxword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf64_Xword d_val;		/* Integer value */
-+      Elf64_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf64_Dyn;
-+
-+/* Legal values for d_tag (dynamic entry type).  */
-+
-+#define DT_NULL		0		/* Marks end of dynamic section */
-+#define DT_NEEDED	1		/* Name of needed library */
-+#define DT_PLTRELSZ	2		/* Size in bytes of PLT relocs */
-+#define DT_PLTGOT	3		/* Processor defined value */
-+#define DT_HASH		4		/* Address of symbol hash table */
-+#define DT_STRTAB	5		/* Address of string table */
-+#define DT_SYMTAB	6		/* Address of symbol table */
-+#define DT_RELA		7		/* Address of Rela relocs */
-+#define DT_RELASZ	8		/* Total size of Rela relocs */
-+#define DT_RELAENT	9		/* Size of one Rela reloc */
-+#define DT_STRSZ	10		/* Size of string table */
-+#define DT_SYMENT	11		/* Size of one symbol table entry */
-+#define DT_INIT		12		/* Address of init function */
-+#define DT_FINI		13		/* Address of termination function */
-+#define DT_SONAME	14		/* Name of shared object */
-+#define DT_RPATH	15		/* Library search path (deprecated) */
-+#define DT_SYMBOLIC	16		/* Start symbol search here */
-+#define DT_REL		17		/* Address of Rel relocs */
-+#define DT_RELSZ	18		/* Total size of Rel relocs */
-+#define DT_RELENT	19		/* Size of one Rel reloc */
-+#define DT_PLTREL	20		/* Type of reloc in PLT */
-+#define DT_DEBUG	21		/* For debugging; unspecified */
-+#define DT_TEXTREL	22		/* Reloc might modify .text */
-+#define DT_JMPREL	23		/* Address of PLT relocs */
-+#define	DT_BIND_NOW	24		/* Process relocations of object */
-+#define	DT_INIT_ARRAY	25		/* Array with addresses of init fct */
-+#define	DT_FINI_ARRAY	26		/* Array with addresses of fini fct */
-+#define	DT_INIT_ARRAYSZ	27		/* Size in bytes of DT_INIT_ARRAY */
-+#define	DT_FINI_ARRAYSZ	28		/* Size in bytes of DT_FINI_ARRAY */
-+#define DT_RUNPATH	29		/* Library search path */
-+#define DT_FLAGS	30		/* Flags for the object being loaded */
-+#define DT_ENCODING	32		/* Start of encoded range */
-+#define DT_PREINIT_ARRAY 32		/* Array with addresses of preinit fct*/
-+#define DT_PREINIT_ARRAYSZ 33		/* size in bytes of DT_PREINIT_ARRAY */
-+#define	DT_NUM		34		/* Number used */
-+#define DT_LOOS		0x6000000d	/* Start of OS-specific */
-+#define DT_HIOS		0x6ffff000	/* End of OS-specific */
-+#define DT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define DT_HIPROC	0x7fffffff	/* End of processor-specific */
-+#define	DT_PROCNUM	DT_MIPS_NUM	/* Most used by any processor */
-+
-+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
-+   Dyn.d_un.d_val field of the Elf*_Dyn structure.  This follows Sun's
-+   approach.  */
-+#define DT_VALRNGLO	0x6ffffd00
-+#define DT_GNU_PRELINKED 0x6ffffdf5	/* Prelinking timestamp */
-+#define DT_GNU_CONFLICTSZ 0x6ffffdf6	/* Size of conflict section */
-+#define DT_GNU_LIBLISTSZ 0x6ffffdf7	/* Size of library list */
-+#define DT_CHECKSUM	0x6ffffdf8
-+#define DT_PLTPADSZ	0x6ffffdf9
-+#define DT_MOVEENT	0x6ffffdfa
-+#define DT_MOVESZ	0x6ffffdfb
-+#define DT_FEATURE_1	0x6ffffdfc	/* Feature selection (DTF_*).  */
-+#define DT_POSFLAG_1	0x6ffffdfd	/* Flags for DT_* entries, effecting
-+					   the following DT_* entry.  */
-+#define DT_SYMINSZ	0x6ffffdfe	/* Size of syminfo table (in bytes) */
-+#define DT_SYMINENT	0x6ffffdff	/* Entry size of syminfo */
-+#define DT_VALRNGHI	0x6ffffdff
-+#define DT_VALTAGIDX(tag)	(DT_VALRNGHI - (tag))	/* Reverse order! */
-+#define DT_VALNUM 12
-+
-+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
-+   Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
-+
-+   If any adjustment is made to the ELF object after it has been
-+   built these entries will need to be adjusted.  */
-+#define DT_ADDRRNGLO	0x6ffffe00
-+#define DT_GNU_HASH	0x6ffffef5	/* GNU-style hash table.  */
-+#define DT_TLSDESC_PLT	0x6ffffef6
-+#define DT_TLSDESC_GOT	0x6ffffef7
-+#define DT_GNU_CONFLICT	0x6ffffef8	/* Start of conflict section */
-+#define DT_GNU_LIBLIST	0x6ffffef9	/* Library list */
-+#define DT_CONFIG	0x6ffffefa	/* Configuration information.  */
-+#define DT_DEPAUDIT	0x6ffffefb	/* Dependency auditing.  */
-+#define DT_AUDIT	0x6ffffefc	/* Object auditing.  */
-+#define	DT_PLTPAD	0x6ffffefd	/* PLT padding.  */
-+#define	DT_MOVETAB	0x6ffffefe	/* Move table.  */
-+#define DT_SYMINFO	0x6ffffeff	/* Syminfo table.  */
-+#define DT_ADDRRNGHI	0x6ffffeff
-+#define DT_ADDRTAGIDX(tag)	(DT_ADDRRNGHI - (tag))	/* Reverse order! */
-+#define DT_ADDRNUM 11
-+
-+/* The versioning entry types.  The next are defined as part of the
-+   GNU extension.  */
-+#define DT_VERSYM	0x6ffffff0
-+
-+#define DT_RELACOUNT	0x6ffffff9
-+#define DT_RELCOUNT	0x6ffffffa
-+
-+/* These were chosen by Sun.  */
-+#define DT_FLAGS_1	0x6ffffffb	/* State flags, see DF_1_* below.  */
-+#define	DT_VERDEF	0x6ffffffc	/* Address of version definition
-+					   table */
-+#define	DT_VERDEFNUM	0x6ffffffd	/* Number of version definitions */
-+#define	DT_VERNEED	0x6ffffffe	/* Address of table with needed
-+					   versions */
-+#define	DT_VERNEEDNUM	0x6fffffff	/* Number of needed versions */
-+#define DT_VERSIONTAGIDX(tag)	(DT_VERNEEDNUM - (tag))	/* Reverse order! */
-+#define DT_VERSIONTAGNUM 16
-+
-+/* Sun added these machine-independent extensions in the "processor-specific"
-+   range.  Be compatible.  */
-+#define DT_AUXILIARY    0x7ffffffd      /* Shared object to load before self */
-+#define DT_FILTER       0x7fffffff      /* Shared object to get values from */
-+#define DT_EXTRATAGIDX(tag)	((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
-+#define DT_EXTRANUM	3
-+
-+/* Values of `d_un.d_val' in the DT_FLAGS entry.  */
-+#define DF_ORIGIN	0x00000001	/* Object may use DF_ORIGIN */
-+#define DF_SYMBOLIC	0x00000002	/* Symbol resolutions starts here */
-+#define DF_TEXTREL	0x00000004	/* Object contains text relocations */
-+#define DF_BIND_NOW	0x00000008	/* No lazy binding for this object */
-+#define DF_STATIC_TLS	0x00000010	/* Module uses the static TLS model */
-+
-+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
-+   entry in the dynamic section.  */
-+#define DF_1_NOW	0x00000001	/* Set RTLD_NOW for this object.  */
-+#define DF_1_GLOBAL	0x00000002	/* Set RTLD_GLOBAL for this object.  */
-+#define DF_1_GROUP	0x00000004	/* Set RTLD_GROUP for this object.  */
-+#define DF_1_NODELETE	0x00000008	/* Set RTLD_NODELETE for this object.*/
-+#define DF_1_LOADFLTR	0x00000010	/* Trigger filtee loading at runtime.*/
-+#define DF_1_INITFIRST	0x00000020	/* Set RTLD_INITFIRST for this object*/
-+#define DF_1_NOOPEN	0x00000040	/* Set RTLD_NOOPEN for this object.  */
-+#define DF_1_ORIGIN	0x00000080	/* $ORIGIN must be handled.  */
-+#define DF_1_DIRECT	0x00000100	/* Direct binding enabled.  */
-+#define DF_1_TRANS	0x00000200
-+#define DF_1_INTERPOSE	0x00000400	/* Object is used to interpose.  */
-+#define DF_1_NODEFLIB	0x00000800	/* Ignore default lib search path.  */
-+#define DF_1_NODUMP	0x00001000	/* Object can't be dldump'ed.  */
-+#define DF_1_CONFALT	0x00002000	/* Configuration alternative created.*/
-+#define DF_1_ENDFILTEE	0x00004000	/* Filtee terminates filters search. */
-+#define	DF_1_DISPRELDNE	0x00008000	/* Disp reloc applied at build time. */
-+#define	DF_1_DISPRELPND	0x00010000	/* Disp reloc applied at run-time.  */
-+
-+/* Flags for the feature selection in DT_FEATURE_1.  */
-+#define DTF_1_PARINIT	0x00000001
-+#define DTF_1_CONFEXP	0x00000002
-+
-+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry.  */
-+#define DF_P1_LAZYLOAD	0x00000001	/* Lazyload following object.  */
-+#define DF_P1_GROUPPERM	0x00000002	/* Symbols from next object are not
-+					   generally available.  */
-+
-+/* Version definition sections.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vd_version;		/* Version revision */
-+  Elf32_Half	vd_flags;		/* Version information */
-+  Elf32_Half	vd_ndx;			/* Version Index */
-+  Elf32_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vd_hash;		/* Version name hash value */
-+  Elf32_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf32_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf32_Verdef;
-+
-+typedef struct
-+{
-+  Elf64_Half	vd_version;		/* Version revision */
-+  Elf64_Half	vd_flags;		/* Version information */
-+  Elf64_Half	vd_ndx;			/* Version Index */
-+  Elf64_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vd_hash;		/* Version name hash value */
-+  Elf64_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf64_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf64_Verdef;
-+
-+
-+/* Legal values for vd_version (version revision).  */
-+#define VER_DEF_NONE	0		/* No version */
-+#define VER_DEF_CURRENT	1		/* Current version */
-+#define VER_DEF_NUM	2		/* Given version number */
-+
-+/* Legal values for vd_flags (version information flags).  */
-+#define VER_FLG_BASE	0x1		/* Version definition of file itself */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+/* Versym symbol index values.  */
-+#define	VER_NDX_LOCAL		0	/* Symbol is local.  */
-+#define	VER_NDX_GLOBAL		1	/* Symbol is global.  */
-+#define	VER_NDX_LORESERVE	0xff00	/* Beginning of reserved entries.  */
-+#define	VER_NDX_ELIMINATE	0xff01	/* Symbol is to be eliminated.  */
-+
-+/* Auxialiary version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vda_name;		/* Version or dependency names */
-+  Elf32_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf32_Verdaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vda_name;		/* Version or dependency names */
-+  Elf64_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf64_Verdaux;
-+
-+
-+/* Version dependency section.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vn_version;		/* Version of structure */
-+  Elf32_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf32_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf32_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf32_Verneed;
-+
-+typedef struct
-+{
-+  Elf64_Half	vn_version;		/* Version of structure */
-+  Elf64_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf64_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf64_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf64_Verneed;
-+
-+
-+/* Legal values for vn_version (version revision).  */
-+#define VER_NEED_NONE	 0		/* No version */
-+#define VER_NEED_CURRENT 1		/* Current version */
-+#define VER_NEED_NUM	 2		/* Given version number */
-+
-+/* Auxiliary needed version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf32_Half	vna_flags;		/* Dependency specific information */
-+  Elf32_Half	vna_other;		/* Unused */
-+  Elf32_Word	vna_name;		/* Dependency name string offset */
-+  Elf32_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf32_Vernaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf64_Half	vna_flags;		/* Dependency specific information */
-+  Elf64_Half	vna_other;		/* Unused */
-+  Elf64_Word	vna_name;		/* Dependency name string offset */
-+  Elf64_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf64_Vernaux;
-+
-+
-+/* Legal values for vna_flags.  */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+
-+/* Auxiliary vector.  */
-+
-+/* This vector is normally only used by the program interpreter.  The
-+   usual definition in an ABI supplement uses the name auxv_t.  The
-+   vector is not usually defined in a standard <elf.h> file, but it
-+   can't hurt.  We rename it to avoid conflicts.  The sizes of these
-+   types are an arrangement between the exec server and the program
-+   interpreter, so we don't fully specify them here.  */
-+
-+typedef struct
-+{
-+  uint32_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint32_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf32_auxv_t;
-+
-+typedef struct
-+{
-+  uint64_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint64_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf64_auxv_t;
-+
-+/* Legal values for a_type (entry type).  */
-+
-+#define AT_NULL		0		/* End of vector */
-+#define AT_IGNORE	1		/* Entry should be ignored */
-+#define AT_EXECFD	2		/* File descriptor of program */
-+#define AT_PHDR		3		/* Program headers for program */
-+#define AT_PHENT	4		/* Size of program header entry */
-+#define AT_PHNUM	5		/* Number of program headers */
-+#define AT_PAGESZ	6		/* System page size */
-+#define AT_BASE		7		/* Base address of interpreter */
-+#define AT_FLAGS	8		/* Flags */
-+#define AT_ENTRY	9		/* Entry point of program */
-+#define AT_NOTELF	10		/* Program is not ELF */
-+#define AT_UID		11		/* Real uid */
-+#define AT_EUID		12		/* Effective uid */
-+#define AT_GID		13		/* Real gid */
-+#define AT_EGID		14		/* Effective gid */
-+#define AT_CLKTCK	17		/* Frequency of times() */
-+
-+/* Some more special a_type values describing the hardware.  */
-+#define AT_PLATFORM	15		/* String identifying platform.  */
-+#define AT_HWCAP	16		/* Machine dependent hints about
-+					   processor capabilities.  */
-+
-+/* This entry gives some information about the FPU initialization
-+   performed by the kernel.  */
-+#define AT_FPUCW	18		/* Used FPU control word.  */
-+
-+/* Cache block sizes.  */
-+#define AT_DCACHEBSIZE	19		/* Data cache block size.  */
-+#define AT_ICACHEBSIZE	20		/* Instruction cache block size.  */
-+#define AT_UCACHEBSIZE	21		/* Unified cache block size.  */
-+
-+/* A special ignored value for PPC, used by the kernel to control the
-+   interpretation of the AUXV. Must be > 16.  */
-+#define AT_IGNOREPPC	22		/* Entry should be ignored.  */
-+
-+#define	AT_SECURE	23		/* Boolean, was exec setuid-like?  */
-+
-+#define AT_BASE_PLATFORM 24		/* String identifying real platforms.*/
-+
-+#define AT_RANDOM	25		/* Address of 16 random bytes.  */
-+
-+#define AT_EXECFN	31		/* Filename of executable.  */
-+
-+/* Pointer to the global system page used for system calls and other
-+   nice things.  */
-+#define AT_SYSINFO	32
-+#define AT_SYSINFO_EHDR	33
-+
-+/* Shapes of the caches.  Bits 0-3 contains associativity; bits 4-7 contains
-+   log2 of line size; mask those to get cache size.  */
-+#define AT_L1I_CACHESHAPE	34
-+#define AT_L1D_CACHESHAPE	35
-+#define AT_L2_CACHESHAPE	36
-+#define AT_L3_CACHESHAPE	37
-+
-+/* Note section contents.  Each entry in the note section begins with
-+   a header of a fixed form.  */
-+
-+typedef struct
-+{
-+  Elf32_Word n_namesz;			/* Length of the note's name.  */
-+  Elf32_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf32_Word n_type;			/* Type of the note.  */
-+} Elf32_Nhdr;
-+
-+typedef struct
-+{
-+  Elf64_Word n_namesz;			/* Length of the note's name.  */
-+  Elf64_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf64_Word n_type;			/* Type of the note.  */
-+} Elf64_Nhdr;
-+
-+/* Known names of notes.  */
-+
-+/* Solaris entries in the note section have this name.  */
-+#define ELF_NOTE_SOLARIS	"SUNW Solaris"
-+
-+/* Note entries for GNU systems have this name.  */
-+#define ELF_NOTE_GNU		"GNU"
-+
-+
-+/* Defined types of notes for Solaris.  */
-+
-+/* Value of descriptor (one word) is desired pagesize for the binary.  */
-+#define ELF_NOTE_PAGESIZE_HINT	1
-+
-+
-+/* Defined note types for GNU systems.  */
-+
-+/* ABI information.  The descriptor consists of words:
-+   word 0: OS descriptor
-+   word 1: major version of the ABI
-+   word 2: minor version of the ABI
-+   word 3: subminor version of the ABI
-+*/
-+#define NT_GNU_ABI_TAG	1
-+#define ELF_NOTE_ABI	NT_GNU_ABI_TAG /* Old name.  */
-+
-+/* Known OSes.  These values can appear in word 0 of an
-+   NT_GNU_ABI_TAG note section entry.  */
-+#define ELF_NOTE_OS_LINUX	0
-+#define ELF_NOTE_OS_GNU		1
-+#define ELF_NOTE_OS_SOLARIS2	2
-+#define ELF_NOTE_OS_FREEBSD	3
-+
-+/* Synthetic hwcap information.  The descriptor begins with two words:
-+   word 0: number of entries
-+   word 1: bitmask of enabled entries
-+   Then follow variable-length entries, one byte followed by a
-+   '\0'-terminated hwcap name string.  The byte gives the bit
-+   number to test if enabled, (1U << bit) & bitmask.  */
-+#define NT_GNU_HWCAP	2
-+
-+/* Build ID bits as generated by ld --build-id.
-+   The descriptor consists of any nonzero number of bytes.  */
-+#define NT_GNU_BUILD_ID	3
-+
-+/* Version note generated by GNU gold containing a version string.  */
-+#define NT_GNU_GOLD_VERSION	4
-+
-+
-+/* Move records.  */
-+typedef struct
-+{
-+  Elf32_Xword m_value;		/* Symbol value.  */
-+  Elf32_Word m_info;		/* Size and index.  */
-+  Elf32_Word m_poffset;		/* Symbol offset.  */
-+  Elf32_Half m_repeat;		/* Repeat count.  */
-+  Elf32_Half m_stride;		/* Stride info.  */
-+} Elf32_Move;
-+
-+typedef struct
-+{
-+  Elf64_Xword m_value;		/* Symbol value.  */
-+  Elf64_Xword m_info;		/* Size and index.  */
-+  Elf64_Xword m_poffset;	/* Symbol offset.  */
-+  Elf64_Half m_repeat;		/* Repeat count.  */
-+  Elf64_Half m_stride;		/* Stride info.  */
-+} Elf64_Move;
-+
-+/* Macro to construct move records.  */
-+#define ELF32_M_SYM(info)	((info) >> 8)
-+#define ELF32_M_SIZE(info)	((unsigned char) (info))
-+#define ELF32_M_INFO(sym, size)	(((sym) << 8) + (unsigned char) (size))
-+
-+#define ELF64_M_SYM(info)	ELF32_M_SYM (info)
-+#define ELF64_M_SIZE(info)	ELF32_M_SIZE (info)
-+#define ELF64_M_INFO(sym, size)	ELF32_M_INFO (sym, size)
-+
-+
-+/* Motorola 68k specific definitions.  */
-+
-+/* Values for Elf32_Ehdr.e_flags.  */
-+#define EF_CPU32	0x00810000
-+
-+/* m68k relocs.  */
-+
-+#define R_68K_NONE	0		/* No reloc */
-+#define R_68K_32	1		/* Direct 32 bit  */
-+#define R_68K_16	2		/* Direct 16 bit  */
-+#define R_68K_8		3		/* Direct 8 bit  */
-+#define R_68K_PC32	4		/* PC relative 32 bit */
-+#define R_68K_PC16	5		/* PC relative 16 bit */
-+#define R_68K_PC8	6		/* PC relative 8 bit */
-+#define R_68K_GOT32	7		/* 32 bit PC relative GOT entry */
-+#define R_68K_GOT16	8		/* 16 bit PC relative GOT entry */
-+#define R_68K_GOT8	9		/* 8 bit PC relative GOT entry */
-+#define R_68K_GOT32O	10		/* 32 bit GOT offset */
-+#define R_68K_GOT16O	11		/* 16 bit GOT offset */
-+#define R_68K_GOT8O	12		/* 8 bit GOT offset */
-+#define R_68K_PLT32	13		/* 32 bit PC relative PLT address */
-+#define R_68K_PLT16	14		/* 16 bit PC relative PLT address */
-+#define R_68K_PLT8	15		/* 8 bit PC relative PLT address */
-+#define R_68K_PLT32O	16		/* 32 bit PLT offset */
-+#define R_68K_PLT16O	17		/* 16 bit PLT offset */
-+#define R_68K_PLT8O	18		/* 8 bit PLT offset */
-+#define R_68K_COPY	19		/* Copy symbol at runtime */
-+#define R_68K_GLOB_DAT	20		/* Create GOT entry */
-+#define R_68K_JMP_SLOT	21		/* Create PLT entry */
-+#define R_68K_RELATIVE	22		/* Adjust by program base */
-+#define R_68K_TLS_GD32      25          /* 32 bit GOT offset for GD */
-+#define R_68K_TLS_GD16      26          /* 16 bit GOT offset for GD */
-+#define R_68K_TLS_GD8       27          /* 8 bit GOT offset for GD */
-+#define R_68K_TLS_LDM32     28          /* 32 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM16     29          /* 16 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM8      30          /* 8 bit GOT offset for LDM */
-+#define R_68K_TLS_LDO32     31          /* 32 bit module-relative offset */
-+#define R_68K_TLS_LDO16     32          /* 16 bit module-relative offset */
-+#define R_68K_TLS_LDO8      33          /* 8 bit module-relative offset */
-+#define R_68K_TLS_IE32      34          /* 32 bit GOT offset for IE */
-+#define R_68K_TLS_IE16      35          /* 16 bit GOT offset for IE */
-+#define R_68K_TLS_IE8       36          /* 8 bit GOT offset for IE */
-+#define R_68K_TLS_LE32      37          /* 32 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE16      38          /* 16 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE8       39          /* 8 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_DTPMOD32  40          /* 32 bit module number */
-+#define R_68K_TLS_DTPREL32  41          /* 32 bit module-relative offset */
-+#define R_68K_TLS_TPREL32   42          /* 32 bit TP-relative offset */
-+/* Keep this the last entry.  */
-+#define R_68K_NUM	43
-+
-+/* Intel 80386 specific definitions.  */
-+
-+/* i386 relocs.  */
-+
-+#define R_386_NONE	   0		/* No reloc */
-+#define R_386_32	   1		/* Direct 32 bit  */
-+#define R_386_PC32	   2		/* PC relative 32 bit */
-+#define R_386_GOT32	   3		/* 32 bit GOT entry */
-+#define R_386_PLT32	   4		/* 32 bit PLT address */
-+#define R_386_COPY	   5		/* Copy symbol at runtime */
-+#define R_386_GLOB_DAT	   6		/* Create GOT entry */
-+#define R_386_JMP_SLOT	   7		/* Create PLT entry */
-+#define R_386_RELATIVE	   8		/* Adjust by program base */
-+#define R_386_GOTOFF	   9		/* 32 bit offset to GOT */
-+#define R_386_GOTPC	   10		/* 32 bit PC relative offset to GOT */
-+#define R_386_32PLT	   11
-+#define R_386_TLS_TPOFF	   14		/* Offset in static TLS block */
-+#define R_386_TLS_IE	   15		/* Address of GOT entry for static TLS
-+					   block offset */
-+#define R_386_TLS_GOTIE	   16		/* GOT entry for static TLS block
-+					   offset */
-+#define R_386_TLS_LE	   17		/* Offset relative to static TLS
-+					   block */
-+#define R_386_TLS_GD	   18		/* Direct 32 bit for GNU version of
-+					   general dynamic thread local data */
-+#define R_386_TLS_LDM	   19		/* Direct 32 bit for GNU version of
-+					   local dynamic thread local data
-+					   in LE code */
-+#define R_386_16	   20
-+#define R_386_PC16	   21
-+#define R_386_8		   22
-+#define R_386_PC8	   23
-+#define R_386_TLS_GD_32	   24		/* Direct 32 bit for general dynamic
-+					   thread local data */
-+#define R_386_TLS_GD_PUSH  25		/* Tag for pushl in GD TLS code */
-+#define R_386_TLS_GD_CALL  26		/* Relocation for call to
-+					   __tls_get_addr() */
-+#define R_386_TLS_GD_POP   27		/* Tag for popl in GD TLS code */
-+#define R_386_TLS_LDM_32   28		/* Direct 32 bit for local dynamic
-+					   thread local data in LE code */
-+#define R_386_TLS_LDM_PUSH 29		/* Tag for pushl in LDM TLS code */
-+#define R_386_TLS_LDM_CALL 30		/* Relocation for call to
-+					   __tls_get_addr() in LDM code */
-+#define R_386_TLS_LDM_POP  31		/* Tag for popl in LDM TLS code */
-+#define R_386_TLS_LDO_32   32		/* Offset relative to TLS block */
-+#define R_386_TLS_IE_32	   33		/* GOT entry for negated static TLS
-+					   block offset */
-+#define R_386_TLS_LE_32	   34		/* Negated offset relative to static
-+					   TLS block */
-+#define R_386_TLS_DTPMOD32 35		/* ID of module containing symbol */
-+#define R_386_TLS_DTPOFF32 36		/* Offset in TLS block */
-+#define R_386_TLS_TPOFF32  37		/* Negated offset in static TLS block */
-+/* 38? */
-+#define R_386_TLS_GOTDESC  39		/* GOT offset for TLS descriptor.  */
-+#define R_386_TLS_DESC_CALL 40		/* Marker of call through TLS
-+					   descriptor for
-+					   relaxation.  */
-+#define R_386_TLS_DESC     41		/* TLS descriptor containing
-+					   pointer to code and to
-+					   argument, returning the TLS
-+					   offset for the symbol.  */
-+#define R_386_IRELATIVE	   42		/* Adjust indirectly by program base */
-+/* Keep this the last entry.  */
-+#define R_386_NUM	   43
-+
-+/* SUN SPARC specific definitions.  */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_SPARC_REGISTER	13	/* Global register reserved to app. */
-+
-+/* Values for Elf64_Ehdr.e_flags.  */
-+
-+#define EF_SPARCV9_MM		3
-+#define EF_SPARCV9_TSO		0
-+#define EF_SPARCV9_PSO		1
-+#define EF_SPARCV9_RMO		2
-+#define EF_SPARC_LEDATA		0x800000 /* little endian data */
-+#define EF_SPARC_EXT_MASK	0xFFFF00
-+#define EF_SPARC_32PLUS		0x000100 /* generic V8+ features */
-+#define EF_SPARC_SUN_US1	0x000200 /* Sun UltraSPARC1 extensions */
-+#define EF_SPARC_HAL_R1		0x000400 /* HAL R1 extensions */
-+#define EF_SPARC_SUN_US3	0x000800 /* Sun UltraSPARCIII extensions */
-+
-+/* SPARC relocs.  */
-+
-+#define R_SPARC_NONE		0	/* No reloc */
-+#define R_SPARC_8		1	/* Direct 8 bit */
-+#define R_SPARC_16		2	/* Direct 16 bit */
-+#define R_SPARC_32		3	/* Direct 32 bit */
-+#define R_SPARC_DISP8		4	/* PC relative 8 bit */
-+#define R_SPARC_DISP16		5	/* PC relative 16 bit */
-+#define R_SPARC_DISP32		6	/* PC relative 32 bit */
-+#define R_SPARC_WDISP30		7	/* PC relative 30 bit shifted */
-+#define R_SPARC_WDISP22		8	/* PC relative 22 bit shifted */
-+#define R_SPARC_HI22		9	/* High 22 bit */
-+#define R_SPARC_22		10	/* Direct 22 bit */
-+#define R_SPARC_13		11	/* Direct 13 bit */
-+#define R_SPARC_LO10		12	/* Truncated 10 bit */
-+#define R_SPARC_GOT10		13	/* Truncated 10 bit GOT entry */
-+#define R_SPARC_GOT13		14	/* 13 bit GOT entry */
-+#define R_SPARC_GOT22		15	/* 22 bit GOT entry shifted */
-+#define R_SPARC_PC10		16	/* PC relative 10 bit truncated */
-+#define R_SPARC_PC22		17	/* PC relative 22 bit shifted */
-+#define R_SPARC_WPLT30		18	/* 30 bit PC relative PLT address */
-+#define R_SPARC_COPY		19	/* Copy symbol at runtime */
-+#define R_SPARC_GLOB_DAT	20	/* Create GOT entry */
-+#define R_SPARC_JMP_SLOT	21	/* Create PLT entry */
-+#define R_SPARC_RELATIVE	22	/* Adjust by program base */
-+#define R_SPARC_UA32		23	/* Direct 32 bit unaligned */
-+
-+/* Additional Sparc64 relocs.  */
-+
-+#define R_SPARC_PLT32		24	/* Direct 32 bit ref to PLT entry */
-+#define R_SPARC_HIPLT22		25	/* High 22 bit PLT entry */
-+#define R_SPARC_LOPLT10		26	/* Truncated 10 bit PLT entry */
-+#define R_SPARC_PCPLT32		27	/* PC rel 32 bit ref to PLT entry */
-+#define R_SPARC_PCPLT22		28	/* PC rel high 22 bit PLT entry */
-+#define R_SPARC_PCPLT10		29	/* PC rel trunc 10 bit PLT entry */
-+#define R_SPARC_10		30	/* Direct 10 bit */
-+#define R_SPARC_11		31	/* Direct 11 bit */
-+#define R_SPARC_64		32	/* Direct 64 bit */
-+#define R_SPARC_OLO10		33	/* 10bit with secondary 13bit addend */
-+#define R_SPARC_HH22		34	/* Top 22 bits of direct 64 bit */
-+#define R_SPARC_HM10		35	/* High middle 10 bits of ... */
-+#define R_SPARC_LM22		36	/* Low middle 22 bits of ... */
-+#define R_SPARC_PC_HH22		37	/* Top 22 bits of pc rel 64 bit */
-+#define R_SPARC_PC_HM10		38	/* High middle 10 bit of ... */
-+#define R_SPARC_PC_LM22		39	/* Low miggle 22 bits of ... */
-+#define R_SPARC_WDISP16		40	/* PC relative 16 bit shifted */
-+#define R_SPARC_WDISP19		41	/* PC relative 19 bit shifted */
-+#define R_SPARC_GLOB_JMP	42	/* was part of v9 ABI but was removed */
-+#define R_SPARC_7		43	/* Direct 7 bit */
-+#define R_SPARC_5		44	/* Direct 5 bit */
-+#define R_SPARC_6		45	/* Direct 6 bit */
-+#define R_SPARC_DISP64		46	/* PC relative 64 bit */
-+#define R_SPARC_PLT64		47	/* Direct 64 bit ref to PLT entry */
-+#define R_SPARC_HIX22		48	/* High 22 bit complemented */
-+#define R_SPARC_LOX10		49	/* Truncated 11 bit complemented */
-+#define R_SPARC_H44		50	/* Direct high 12 of 44 bit */
-+#define R_SPARC_M44		51	/* Direct mid 22 of 44 bit */
-+#define R_SPARC_L44		52	/* Direct low 10 of 44 bit */
-+#define R_SPARC_REGISTER	53	/* Global register usage */
-+#define R_SPARC_UA64		54	/* Direct 64 bit unaligned */
-+#define R_SPARC_UA16		55	/* Direct 16 bit unaligned */
-+#define R_SPARC_TLS_GD_HI22	56
-+#define R_SPARC_TLS_GD_LO10	57
-+#define R_SPARC_TLS_GD_ADD	58
-+#define R_SPARC_TLS_GD_CALL	59
-+#define R_SPARC_TLS_LDM_HI22	60
-+#define R_SPARC_TLS_LDM_LO10	61
-+#define R_SPARC_TLS_LDM_ADD	62
-+#define R_SPARC_TLS_LDM_CALL	63
-+#define R_SPARC_TLS_LDO_HIX22	64
-+#define R_SPARC_TLS_LDO_LOX10	65
-+#define R_SPARC_TLS_LDO_ADD	66
-+#define R_SPARC_TLS_IE_HI22	67
-+#define R_SPARC_TLS_IE_LO10	68
-+#define R_SPARC_TLS_IE_LD	69
-+#define R_SPARC_TLS_IE_LDX	70
-+#define R_SPARC_TLS_IE_ADD	71
-+#define R_SPARC_TLS_LE_HIX22	72
-+#define R_SPARC_TLS_LE_LOX10	73
-+#define R_SPARC_TLS_DTPMOD32	74
-+#define R_SPARC_TLS_DTPMOD64	75
-+#define R_SPARC_TLS_DTPOFF32	76
-+#define R_SPARC_TLS_DTPOFF64	77
-+#define R_SPARC_TLS_TPOFF32	78
-+#define R_SPARC_TLS_TPOFF64	79
-+#define R_SPARC_GOTDATA_HIX22	80
-+#define R_SPARC_GOTDATA_LOX10	81
-+#define R_SPARC_GOTDATA_OP_HIX22	82
-+#define R_SPARC_GOTDATA_OP_LOX10	83
-+#define R_SPARC_GOTDATA_OP	84
-+#define R_SPARC_H34		85
-+#define R_SPARC_SIZE32		86
-+#define R_SPARC_SIZE64		87
-+#define R_SPARC_WDISP10		88
-+#define R_SPARC_JMP_IREL	248
-+#define R_SPARC_IRELATIVE	249
-+#define R_SPARC_GNU_VTINHERIT	250
-+#define R_SPARC_GNU_VTENTRY	251
-+#define R_SPARC_REV32		252
-+/* Keep this the last entry.  */
-+#define R_SPARC_NUM		253
-+
-+/* For Sparc64, legal values for d_tag of Elf64_Dyn.  */
-+
-+#define DT_SPARC_REGISTER 0x70000001
-+#define DT_SPARC_NUM	2
-+
-+/* MIPS R3000 specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_MIPS_NOREORDER   1		/* A .noreorder directive was used */
-+#define EF_MIPS_PIC	    2		/* Contains PIC code */
-+#define EF_MIPS_CPIC	    4		/* Uses PIC calling sequence */
-+#define EF_MIPS_XGOT	    8
-+#define EF_MIPS_64BIT_WHIRL 16
-+#define EF_MIPS_ABI2	    32
-+#define EF_MIPS_ABI_ON32    64
-+#define EF_MIPS_ARCH	    0xf0000000	/* MIPS architecture level */
-+
-+/* Legal values for MIPS architecture level.  */
-+
-+#define EF_MIPS_ARCH_1	    0x00000000	/* -mips1 code.  */
-+#define EF_MIPS_ARCH_2	    0x10000000	/* -mips2 code.  */
-+#define EF_MIPS_ARCH_3	    0x20000000	/* -mips3 code.  */
-+#define EF_MIPS_ARCH_4	    0x30000000	/* -mips4 code.  */
-+#define EF_MIPS_ARCH_5	    0x40000000	/* -mips5 code.  */
-+#define EF_MIPS_ARCH_32	    0x60000000	/* MIPS32 code.  */
-+#define EF_MIPS_ARCH_64	    0x70000000	/* MIPS64 code.  */
-+
-+/* The following are non-official names and should not be used.  */
-+
-+#define E_MIPS_ARCH_1	  0x00000000	/* -mips1 code.  */
-+#define E_MIPS_ARCH_2	  0x10000000	/* -mips2 code.  */
-+#define E_MIPS_ARCH_3	  0x20000000	/* -mips3 code.  */
-+#define E_MIPS_ARCH_4	  0x30000000	/* -mips4 code.  */
-+#define E_MIPS_ARCH_5	  0x40000000	/* -mips5 code.  */
-+#define E_MIPS_ARCH_32	  0x60000000	/* MIPS32 code.  */
-+#define E_MIPS_ARCH_64	  0x70000000	/* MIPS64 code.  */
-+
-+/* Special section indices.  */
-+
-+#define SHN_MIPS_ACOMMON    0xff00	/* Allocated common symbols */
-+#define SHN_MIPS_TEXT	    0xff01	/* Allocated test symbols.  */
-+#define SHN_MIPS_DATA	    0xff02	/* Allocated data symbols.  */
-+#define SHN_MIPS_SCOMMON    0xff03	/* Small common symbols */
-+#define SHN_MIPS_SUNDEFINED 0xff04	/* Small undefined symbols */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_MIPS_LIBLIST       0x70000000 /* Shared objects used in link */
-+#define SHT_MIPS_MSYM	       0x70000001
-+#define SHT_MIPS_CONFLICT      0x70000002 /* Conflicting symbols */
-+#define SHT_MIPS_GPTAB	       0x70000003 /* Global data area sizes */
-+#define SHT_MIPS_UCODE	       0x70000004 /* Reserved for SGI/MIPS compilers */
-+#define SHT_MIPS_DEBUG	       0x70000005 /* MIPS ECOFF debugging information*/
-+#define SHT_MIPS_REGINFO       0x70000006 /* Register usage information */
-+#define SHT_MIPS_PACKAGE       0x70000007
-+#define SHT_MIPS_PACKSYM       0x70000008
-+#define SHT_MIPS_RELD	       0x70000009
-+#define SHT_MIPS_IFACE         0x7000000b
-+#define SHT_MIPS_CONTENT       0x7000000c
-+#define SHT_MIPS_OPTIONS       0x7000000d /* Miscellaneous options.  */
-+#define SHT_MIPS_SHDR	       0x70000010
-+#define SHT_MIPS_FDESC	       0x70000011
-+#define SHT_MIPS_EXTSYM	       0x70000012
-+#define SHT_MIPS_DENSE	       0x70000013
-+#define SHT_MIPS_PDESC	       0x70000014
-+#define SHT_MIPS_LOCSYM	       0x70000015
-+#define SHT_MIPS_AUXSYM	       0x70000016
-+#define SHT_MIPS_OPTSYM	       0x70000017
-+#define SHT_MIPS_LOCSTR	       0x70000018
-+#define SHT_MIPS_LINE	       0x70000019
-+#define SHT_MIPS_RFDESC	       0x7000001a
-+#define SHT_MIPS_DELTASYM      0x7000001b
-+#define SHT_MIPS_DELTAINST     0x7000001c
-+#define SHT_MIPS_DELTACLASS    0x7000001d
-+#define SHT_MIPS_DWARF         0x7000001e /* DWARF debugging information.  */
-+#define SHT_MIPS_DELTADECL     0x7000001f
-+#define SHT_MIPS_SYMBOL_LIB    0x70000020
-+#define SHT_MIPS_EVENTS	       0x70000021 /* Event section.  */
-+#define SHT_MIPS_TRANSLATE     0x70000022
-+#define SHT_MIPS_PIXIE	       0x70000023
-+#define SHT_MIPS_XLATE	       0x70000024
-+#define SHT_MIPS_XLATE_DEBUG   0x70000025
-+#define SHT_MIPS_WHIRL	       0x70000026
-+#define SHT_MIPS_EH_REGION     0x70000027
-+#define SHT_MIPS_XLATE_OLD     0x70000028
-+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_MIPS_GPREL	 0x10000000	/* Must be part of global data area */
-+#define SHF_MIPS_MERGE	 0x20000000
-+#define SHF_MIPS_ADDR	 0x40000000
-+#define SHF_MIPS_STRINGS 0x80000000
-+#define SHF_MIPS_NOSTRIP 0x08000000
-+#define SHF_MIPS_LOCAL	 0x04000000
-+#define SHF_MIPS_NAMES	 0x02000000
-+#define SHF_MIPS_NODUPE	 0x01000000
-+
-+
-+/* Symbol tables.  */
-+
-+/* MIPS specific values for `st_other'.  */
-+#define STO_MIPS_DEFAULT		0x0
-+#define STO_MIPS_INTERNAL		0x1
-+#define STO_MIPS_HIDDEN			0x2
-+#define STO_MIPS_PROTECTED		0x3
-+#define STO_MIPS_PLT			0x8
-+#define STO_MIPS_SC_ALIGN_UNUSED	0xff
-+
-+/* MIPS specific values for `st_info'.  */
-+#define STB_MIPS_SPLIT_COMMON		13
-+
-+/* Entries found in sections of type SHT_MIPS_GPTAB.  */
-+
-+typedef union
-+{
-+  struct
-+    {
-+      Elf32_Word gt_current_g_value;	/* -G value used for compilation */
-+      Elf32_Word gt_unused;		/* Not used */
-+    } gt_header;			/* First entry in section */
-+  struct
-+    {
-+      Elf32_Word gt_g_value;		/* If this value were used for -G */
-+      Elf32_Word gt_bytes;		/* This many bytes would be used */
-+    } gt_entry;				/* Subsequent entries in section */
-+} Elf32_gptab;
-+
-+/* Entry found in sections of type SHT_MIPS_REGINFO.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	ri_gprmask;		/* General registers used */
-+  Elf32_Word	ri_cprmask[4];		/* Coprocessor registers used */
-+  Elf32_Sword	ri_gp_value;		/* $gp register value */
-+} Elf32_RegInfo;
-+
-+/* Entries found in sections of type SHT_MIPS_OPTIONS.  */
-+
-+typedef struct
-+{
-+  unsigned char kind;		/* Determines interpretation of the
-+				   variable part of descriptor.  */
-+  unsigned char size;		/* Size of descriptor, including header.  */
-+  Elf32_Section section;	/* Section header index of section affected,
-+				   0 for global options.  */
-+  Elf32_Word info;		/* Kind-specific information.  */
-+} Elf_Options;
-+
-+/* Values for `kind' field in Elf_Options.  */
-+
-+#define ODK_NULL	0	/* Undefined.  */
-+#define ODK_REGINFO	1	/* Register usage information.  */
-+#define ODK_EXCEPTIONS	2	/* Exception processing options.  */
-+#define ODK_PAD		3	/* Section padding options.  */
-+#define ODK_HWPATCH	4	/* Hardware workarounds performed */
-+#define ODK_FILL	5	/* record the fill value used by the linker. */
-+#define ODK_TAGS	6	/* reserve space for desktop tools to write. */
-+#define ODK_HWAND	7	/* HW workarounds.  'AND' bits when merging. */
-+#define ODK_HWOR	8	/* HW workarounds.  'OR' bits when merging.  */
-+
-+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries.  */
-+
-+#define OEX_FPU_MIN	0x1f	/* FPE's which MUST be enabled.  */
-+#define OEX_FPU_MAX	0x1f00	/* FPE's which MAY be enabled.  */
-+#define OEX_PAGE0	0x10000	/* page zero must be mapped.  */
-+#define OEX_SMM		0x20000	/* Force sequential memory mode?  */
-+#define OEX_FPDBUG	0x40000	/* Force floating point debug mode?  */
-+#define OEX_PRECISEFP	OEX_FPDBUG
-+#define OEX_DISMISS	0x80000	/* Dismiss invalid address faults?  */
-+
-+#define OEX_FPU_INVAL	0x10
-+#define OEX_FPU_DIV0	0x08
-+#define OEX_FPU_OFLO	0x04
-+#define OEX_FPU_UFLO	0x02
-+#define OEX_FPU_INEX	0x01
-+
-+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry.  */
-+
-+#define OHW_R4KEOP	0x1	/* R4000 end-of-page patch.  */
-+#define OHW_R8KPFETCH	0x2	/* may need R8000 prefetch patch.  */
-+#define OHW_R5KEOP	0x4	/* R5000 end-of-page patch.  */
-+#define OHW_R5KCVTL	0x8	/* R5000 cvt.[ds].l bug.  clean=1.  */
-+
-+#define OPAD_PREFIX	0x1
-+#define OPAD_POSTFIX	0x2
-+#define OPAD_SYMBOL	0x4
-+
-+/* Entry found in `.options' section.  */
-+
-+typedef struct
-+{
-+  Elf32_Word hwp_flags1;	/* Extra flags.  */
-+  Elf32_Word hwp_flags2;	/* Extra flags.  */
-+} Elf_Options_Hw;
-+
-+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries.  */
-+
-+#define OHWA0_R4KEOP_CHECKED	0x00000001
-+#define OHWA1_R4KEOP_CLEAN	0x00000002
-+
-+/* MIPS relocs.  */
-+
-+#define R_MIPS_NONE		0	/* No reloc */
-+#define R_MIPS_16		1	/* Direct 16 bit */
-+#define R_MIPS_32		2	/* Direct 32 bit */
-+#define R_MIPS_REL32		3	/* PC relative 32 bit */
-+#define R_MIPS_26		4	/* Direct 26 bit shifted */
-+#define R_MIPS_HI16		5	/* High 16 bit */
-+#define R_MIPS_LO16		6	/* Low 16 bit */
-+#define R_MIPS_GPREL16		7	/* GP relative 16 bit */
-+#define R_MIPS_LITERAL		8	/* 16 bit literal entry */
-+#define R_MIPS_GOT16		9	/* 16 bit GOT entry */
-+#define R_MIPS_PC16		10	/* PC relative 16 bit */
-+#define R_MIPS_CALL16		11	/* 16 bit GOT entry for function */
-+#define R_MIPS_GPREL32		12	/* GP relative 32 bit */
-+
-+#define R_MIPS_SHIFT5		16
-+#define R_MIPS_SHIFT6		17
-+#define R_MIPS_64		18
-+#define R_MIPS_GOT_DISP		19
-+#define R_MIPS_GOT_PAGE		20
-+#define R_MIPS_GOT_OFST		21
-+#define R_MIPS_GOT_HI16		22
-+#define R_MIPS_GOT_LO16		23
-+#define R_MIPS_SUB		24
-+#define R_MIPS_INSERT_A		25
-+#define R_MIPS_INSERT_B		26
-+#define R_MIPS_DELETE		27
-+#define R_MIPS_HIGHER		28
-+#define R_MIPS_HIGHEST		29
-+#define R_MIPS_CALL_HI16	30
-+#define R_MIPS_CALL_LO16	31
-+#define R_MIPS_SCN_DISP		32
-+#define R_MIPS_REL16		33
-+#define R_MIPS_ADD_IMMEDIATE	34
-+#define R_MIPS_PJUMP		35
-+#define R_MIPS_RELGOT		36
-+#define R_MIPS_JALR		37
-+#define R_MIPS_TLS_DTPMOD32	38	/* Module number 32 bit */
-+#define R_MIPS_TLS_DTPREL32	39	/* Module-relative offset 32 bit */
-+#define R_MIPS_TLS_DTPMOD64	40	/* Module number 64 bit */
-+#define R_MIPS_TLS_DTPREL64	41	/* Module-relative offset 64 bit */
-+#define R_MIPS_TLS_GD		42	/* 16 bit GOT offset for GD */
-+#define R_MIPS_TLS_LDM		43	/* 16 bit GOT offset for LDM */
-+#define R_MIPS_TLS_DTPREL_HI16	44	/* Module-relative offset, high 16 bits */
-+#define R_MIPS_TLS_DTPREL_LO16	45	/* Module-relative offset, low 16 bits */
-+#define R_MIPS_TLS_GOTTPREL	46	/* 16 bit GOT offset for IE */
-+#define R_MIPS_TLS_TPREL32	47	/* TP-relative offset, 32 bit */
-+#define R_MIPS_TLS_TPREL64	48	/* TP-relative offset, 64 bit */
-+#define R_MIPS_TLS_TPREL_HI16	49	/* TP-relative offset, high 16 bits */
-+#define R_MIPS_TLS_TPREL_LO16	50	/* TP-relative offset, low 16 bits */
-+#define R_MIPS_GLOB_DAT		51
-+#define R_MIPS_COPY		126
-+#define R_MIPS_JUMP_SLOT        127
-+/* Keep this the last entry.  */
-+#define R_MIPS_NUM		128
-+
-+/* Legal values for p_type field of Elf32_Phdr.  */
-+
-+#define PT_MIPS_REGINFO	0x70000000	/* Register usage information */
-+#define PT_MIPS_RTPROC  0x70000001	/* Runtime procedure table. */
-+#define PT_MIPS_OPTIONS 0x70000002
-+
-+/* Special program header types.  */
-+
-+#define PF_MIPS_LOCAL	0x10000000
-+
-+/* Legal values for d_tag field of Elf32_Dyn.  */
-+
-+#define DT_MIPS_RLD_VERSION  0x70000001	/* Runtime linker interface version */
-+#define DT_MIPS_TIME_STAMP   0x70000002	/* Timestamp */
-+#define DT_MIPS_ICHECKSUM    0x70000003	/* Checksum */
-+#define DT_MIPS_IVERSION     0x70000004	/* Version string (string tbl index) */
-+#define DT_MIPS_FLAGS	     0x70000005	/* Flags */
-+#define DT_MIPS_BASE_ADDRESS 0x70000006	/* Base address */
-+#define DT_MIPS_MSYM	     0x70000007
-+#define DT_MIPS_CONFLICT     0x70000008	/* Address of CONFLICT section */
-+#define DT_MIPS_LIBLIST	     0x70000009	/* Address of LIBLIST section */
-+#define DT_MIPS_LOCAL_GOTNO  0x7000000a	/* Number of local GOT entries */
-+#define DT_MIPS_CONFLICTNO   0x7000000b	/* Number of CONFLICT entries */
-+#define DT_MIPS_LIBLISTNO    0x70000010	/* Number of LIBLIST entries */
-+#define DT_MIPS_SYMTABNO     0x70000011	/* Number of DYNSYM entries */
-+#define DT_MIPS_UNREFEXTNO   0x70000012	/* First external DYNSYM */
-+#define DT_MIPS_GOTSYM	     0x70000013	/* First GOT entry in DYNSYM */
-+#define DT_MIPS_HIPAGENO     0x70000014	/* Number of GOT page table entries */
-+#define DT_MIPS_RLD_MAP	     0x70000016	/* Address of run time loader map.  */
-+#define DT_MIPS_DELTA_CLASS  0x70000017	/* Delta C++ class definition.  */
-+#define DT_MIPS_DELTA_CLASS_NO    0x70000018 /* Number of entries in
-+						DT_MIPS_DELTA_CLASS.  */
-+#define DT_MIPS_DELTA_INSTANCE    0x70000019 /* Delta C++ class instances.  */
-+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
-+						DT_MIPS_DELTA_INSTANCE.  */
-+#define DT_MIPS_DELTA_RELOC  0x7000001b /* Delta relocations.  */
-+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
-+					     DT_MIPS_DELTA_RELOC.  */
-+#define DT_MIPS_DELTA_SYM    0x7000001d /* Delta symbols that Delta
-+					   relocations refer to.  */
-+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
-+					   DT_MIPS_DELTA_SYM.  */
-+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
-+					     class declaration.  */
-+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
-+						DT_MIPS_DELTA_CLASSSYM.  */
-+#define DT_MIPS_CXX_FLAGS    0x70000022 /* Flags indicating for C++ flavor.  */
-+#define DT_MIPS_PIXIE_INIT   0x70000023
-+#define DT_MIPS_SYMBOL_LIB   0x70000024
-+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
-+#define DT_MIPS_LOCAL_GOTIDX 0x70000026
-+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
-+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
-+#define DT_MIPS_OPTIONS	     0x70000029 /* Address of .options.  */
-+#define DT_MIPS_INTERFACE    0x7000002a /* Address of .interface.  */
-+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
-+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
-+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
-+						    function stored in GOT.  */
-+#define DT_MIPS_PERF_SUFFIX  0x7000002e /* Default suffix of dso to be added
-+					   by rld on dlopen() calls.  */
-+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
-+#define DT_MIPS_GP_VALUE     0x70000030 /* GP value for aux GOTs.  */
-+#define DT_MIPS_AUX_DYNAMIC  0x70000031 /* Address of aux .dynamic.  */
-+/* The address of .got.plt in an executable using the new non-PIC ABI.  */
-+#define DT_MIPS_PLTGOT	     0x70000032
-+/* The base of the PLT in an executable using the new non-PIC ABI if that
-+   PLT is writable.  For a non-writable PLT, this is omitted or has a zero
-+   value.  */
-+#define DT_MIPS_RWPLT        0x70000034
-+#define DT_MIPS_NUM	     0x35
-+
-+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry.  */
-+
-+#define RHF_NONE		   0		/* No flags */
-+#define RHF_QUICKSTART		   (1 << 0)	/* Use quickstart */
-+#define RHF_NOTPOT		   (1 << 1)	/* Hash size not power of 2 */
-+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2)	/* Ignore LD_LIBRARY_PATH */
-+#define RHF_NO_MOVE		   (1 << 3)
-+#define RHF_SGI_ONLY		   (1 << 4)
-+#define RHF_GUARANTEE_INIT	   (1 << 5)
-+#define RHF_DELTA_C_PLUS_PLUS	   (1 << 6)
-+#define RHF_GUARANTEE_START_INIT   (1 << 7)
-+#define RHF_PIXIE		   (1 << 8)
-+#define RHF_DEFAULT_DELAY_LOAD	   (1 << 9)
-+#define RHF_REQUICKSTART	   (1 << 10)
-+#define RHF_REQUICKSTARTED	   (1 << 11)
-+#define RHF_CORD		   (1 << 12)
-+#define RHF_NO_UNRES_UNDEF	   (1 << 13)
-+#define RHF_RLD_ORDER_SAFE	   (1 << 14)
-+
-+/* Entries found in sections of type SHT_MIPS_LIBLIST.  */
-+
-+typedef struct
-+{
-+  Elf32_Word l_name;		/* Name (string table index) */
-+  Elf32_Word l_time_stamp;	/* Timestamp */
-+  Elf32_Word l_checksum;	/* Checksum */
-+  Elf32_Word l_version;		/* Interface version */
-+  Elf32_Word l_flags;		/* Flags */
-+} Elf32_Lib;
-+
-+typedef struct
-+{
-+  Elf64_Word l_name;		/* Name (string table index) */
-+  Elf64_Word l_time_stamp;	/* Timestamp */
-+  Elf64_Word l_checksum;	/* Checksum */
-+  Elf64_Word l_version;		/* Interface version */
-+  Elf64_Word l_flags;		/* Flags */
-+} Elf64_Lib;
-+
-+
-+/* Legal values for l_flags.  */
-+
-+#define LL_NONE		  0
-+#define LL_EXACT_MATCH	  (1 << 0)	/* Require exact match */
-+#define LL_IGNORE_INT_VER (1 << 1)	/* Ignore interface version */
-+#define LL_REQUIRE_MINOR  (1 << 2)
-+#define LL_EXPORTS	  (1 << 3)
-+#define LL_DELAY_LOAD	  (1 << 4)
-+#define LL_DELTA	  (1 << 5)
-+
-+/* Entries found in sections of type SHT_MIPS_CONFLICT.  */
-+
-+typedef Elf32_Addr Elf32_Conflict;
-+
-+
-+/* HPPA specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
-+#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
-+#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
-+#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
-+#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
-+					      prediction.  */
-+#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
-+#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
-+
-+/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
-+
-+#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
-+#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
-+#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
-+
-+/* Additional section indeces.  */
-+
-+#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
-+					      symbols in ANSI C.  */
-+#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
-+#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
-+#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
-+#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
-+#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
-+
-+#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
-+#define STT_HP_STUB		(STT_LOOS + 0x2)
-+
-+/* HPPA relocs.  */
-+
-+#define R_PARISC_NONE		0	/* No reloc.  */
-+#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
-+#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
-+#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
-+#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
-+#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
-+#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
-+#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
-+#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
-+#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
-+#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
-+#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
-+#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
-+#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
-+#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
-+#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
-+#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
-+#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
-+#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
-+#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
-+#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
-+#define R_PARISC_PLABEL21L	66	/* Left 21 bits of fdesc address.  */
-+#define R_PARISC_PLABEL14R	70	/* Right 14 bits of fdesc address.  */
-+#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
-+#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
-+#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
-+#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
-+#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
-+#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
-+#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LORESERVE	128
-+#define R_PARISC_COPY		128	/* Copy relocation.  */
-+#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
-+#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
-+#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
-+#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
-+#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
-+#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
-+#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
-+#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_GNU_VTENTRY	232
-+#define R_PARISC_GNU_VTINHERIT	233
-+#define R_PARISC_TLS_GD21L	234	/* GD 21-bit left.  */
-+#define R_PARISC_TLS_GD14R	235	/* GD 14-bit right.  */
-+#define R_PARISC_TLS_GDCALL	236	/* GD call to __t_g_a.  */
-+#define R_PARISC_TLS_LDM21L	237	/* LD module 21-bit left.  */
-+#define R_PARISC_TLS_LDM14R	238	/* LD module 14-bit right.  */
-+#define R_PARISC_TLS_LDMCALL	239	/* LD module call to __t_g_a.  */
-+#define R_PARISC_TLS_LDO21L	240	/* LD offset 21-bit left.  */
-+#define R_PARISC_TLS_LDO14R	241	/* LD offset 14-bit right.  */
-+#define R_PARISC_TLS_DTPMOD32	242	/* DTP module 32-bit.  */
-+#define R_PARISC_TLS_DTPMOD64	243	/* DTP module 64-bit.  */
-+#define R_PARISC_TLS_DTPOFF32	244	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_DTPOFF64	245	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_LE21L	R_PARISC_TPREL21L
-+#define R_PARISC_TLS_LE14R	R_PARISC_TPREL14R
-+#define R_PARISC_TLS_IE21L	R_PARISC_LTOFF_TP21L
-+#define R_PARISC_TLS_IE14R	R_PARISC_LTOFF_TP14R
-+#define R_PARISC_TLS_TPREL32	R_PARISC_TPREL32
-+#define R_PARISC_TLS_TPREL64	R_PARISC_TPREL64
-+#define R_PARISC_HIRESERVE	255
-+
-+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PT_HP_TLS		(PT_LOOS + 0x0)
-+#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
-+#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
-+#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
-+#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
-+#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
-+#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
-+#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
-+#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
-+#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
-+#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
-+#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
-+#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
-+#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
-+#define PT_HP_STACK		(PT_LOOS + 0x14)
-+
-+#define PT_PARISC_ARCHEXT	0x70000000
-+#define PT_PARISC_UNWIND	0x70000001
-+
-+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PF_PARISC_SBP		0x08000000
-+
-+#define PF_HP_PAGE_SIZE		0x00100000
-+#define PF_HP_FAR_SHARED	0x00200000
-+#define PF_HP_NEAR_SHARED	0x00400000
-+#define PF_HP_CODE		0x01000000
-+#define PF_HP_MODIFY		0x02000000
-+#define PF_HP_LAZYSWAP		0x04000000
-+#define PF_HP_SBP		0x08000000
-+
-+
-+/* Alpha specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf64_Ehdr.  */
-+
-+#define EF_ALPHA_32BIT		1	/* All addresses must be < 2GB.  */
-+#define EF_ALPHA_CANRELAX	2	/* Relocations for relaxing exist.  */
-+
-+/* Legal values for sh_type field of Elf64_Shdr.  */
-+
-+/* These two are primerily concerned with ECOFF debugging info.  */
-+#define SHT_ALPHA_DEBUG		0x70000001
-+#define SHT_ALPHA_REGINFO	0x70000002
-+
-+/* Legal values for sh_flags field of Elf64_Shdr.  */
-+
-+#define SHF_ALPHA_GPREL		0x10000000
-+
-+/* Legal values for st_other field of Elf64_Sym.  */
-+#define STO_ALPHA_NOPV		0x80	/* No PV required.  */
-+#define STO_ALPHA_STD_GPLOAD	0x88	/* PV only used for initial ldgp.  */
-+
-+/* Alpha relocs.  */
-+
-+#define R_ALPHA_NONE		0	/* No reloc */
-+#define R_ALPHA_REFLONG		1	/* Direct 32 bit */
-+#define R_ALPHA_REFQUAD		2	/* Direct 64 bit */
-+#define R_ALPHA_GPREL32		3	/* GP relative 32 bit */
-+#define R_ALPHA_LITERAL		4	/* GP relative 16 bit w/optimization */
-+#define R_ALPHA_LITUSE		5	/* Optimization hint for LITERAL */
-+#define R_ALPHA_GPDISP		6	/* Add displacement to GP */
-+#define R_ALPHA_BRADDR		7	/* PC+4 relative 23 bit shifted */
-+#define R_ALPHA_HINT		8	/* PC+4 relative 16 bit shifted */
-+#define R_ALPHA_SREL16		9	/* PC relative 16 bit */
-+#define R_ALPHA_SREL32		10	/* PC relative 32 bit */
-+#define R_ALPHA_SREL64		11	/* PC relative 64 bit */
-+#define R_ALPHA_GPRELHIGH	17	/* GP relative 32 bit, high 16 bits */
-+#define R_ALPHA_GPRELLOW	18	/* GP relative 32 bit, low 16 bits */
-+#define R_ALPHA_GPREL16		19	/* GP relative 16 bit */
-+#define R_ALPHA_COPY		24	/* Copy symbol at runtime */
-+#define R_ALPHA_GLOB_DAT	25	/* Create GOT entry */
-+#define R_ALPHA_JMP_SLOT	26	/* Create PLT entry */
-+#define R_ALPHA_RELATIVE	27	/* Adjust by program base */
-+#define R_ALPHA_TLS_GD_HI	28
-+#define R_ALPHA_TLSGD		29
-+#define R_ALPHA_TLS_LDM		30
-+#define R_ALPHA_DTPMOD64	31
-+#define R_ALPHA_GOTDTPREL	32
-+#define R_ALPHA_DTPREL64	33
-+#define R_ALPHA_DTPRELHI	34
-+#define R_ALPHA_DTPRELLO	35
-+#define R_ALPHA_DTPREL16	36
-+#define R_ALPHA_GOTTPREL	37
-+#define R_ALPHA_TPREL64		38
-+#define R_ALPHA_TPRELHI		39
-+#define R_ALPHA_TPRELLO		40
-+#define R_ALPHA_TPREL16		41
-+/* Keep this the last entry.  */
-+#define R_ALPHA_NUM		46
-+
-+/* Magic values of the LITUSE relocation addend.  */
-+#define LITUSE_ALPHA_ADDR	0
-+#define LITUSE_ALPHA_BASE	1
-+#define LITUSE_ALPHA_BYTOFF	2
-+#define LITUSE_ALPHA_JSR	3
-+#define LITUSE_ALPHA_TLS_GD	4
-+#define LITUSE_ALPHA_TLS_LDM	5
-+
-+/* Legal values for d_tag of Elf64_Dyn.  */
-+#define DT_ALPHA_PLTRO		(DT_LOPROC + 0)
-+#define DT_ALPHA_NUM		1
-+
-+/* PowerPC specific declarations */
-+
-+/* Values for Elf32/64_Ehdr.e_flags.  */
-+#define EF_PPC_EMB		0x80000000	/* PowerPC embedded flag */
-+
-+/* Cygnus local bits below */
-+#define EF_PPC_RELOCATABLE	0x00010000	/* PowerPC -mrelocatable flag*/
-+#define EF_PPC_RELOCATABLE_LIB	0x00008000	/* PowerPC -mrelocatable-lib
-+						   flag */
-+
-+/* PowerPC relocations defined by the ABIs */
-+#define R_PPC_NONE		0
-+#define R_PPC_ADDR32		1	/* 32bit absolute address */
-+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-+#define R_PPC_ADDR16		3	/* 16bit absolute address */
-+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-+#define R_PPC_ADDR14_BRTAKEN	8
-+#define R_PPC_ADDR14_BRNTAKEN	9
-+#define R_PPC_REL24		10	/* PC relative 26 bit */
-+#define R_PPC_REL14		11	/* PC relative 16 bit */
-+#define R_PPC_REL14_BRTAKEN	12
-+#define R_PPC_REL14_BRNTAKEN	13
-+#define R_PPC_GOT16		14
-+#define R_PPC_GOT16_LO		15
-+#define R_PPC_GOT16_HI		16
-+#define R_PPC_GOT16_HA		17
-+#define R_PPC_PLTREL24		18
-+#define R_PPC_COPY		19
-+#define R_PPC_GLOB_DAT		20
-+#define R_PPC_JMP_SLOT		21
-+#define R_PPC_RELATIVE		22
-+#define R_PPC_LOCAL24PC		23
-+#define R_PPC_UADDR32		24
-+#define R_PPC_UADDR16		25
-+#define R_PPC_REL32		26
-+#define R_PPC_PLT32		27
-+#define R_PPC_PLTREL32		28
-+#define R_PPC_PLT16_LO		29
-+#define R_PPC_PLT16_HI		30
-+#define R_PPC_PLT16_HA		31
-+#define R_PPC_SDAREL16		32
-+#define R_PPC_SECTOFF		33
-+#define R_PPC_SECTOFF_LO	34
-+#define R_PPC_SECTOFF_HI	35
-+#define R_PPC_SECTOFF_HA	36
-+
-+/* PowerPC relocations defined for the TLS access ABI.  */
-+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
-+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
-+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
-+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
-+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
-+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
-+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
-+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
-+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
-+
-+/* The remaining relocs are from the Embedded ELF ABI, and are not
-+   in the SVR4 ELF ABI.  */
-+#define R_PPC_EMB_NADDR32	101
-+#define R_PPC_EMB_NADDR16	102
-+#define R_PPC_EMB_NADDR16_LO	103
-+#define R_PPC_EMB_NADDR16_HI	104
-+#define R_PPC_EMB_NADDR16_HA	105
-+#define R_PPC_EMB_SDAI16	106
-+#define R_PPC_EMB_SDA2I16	107
-+#define R_PPC_EMB_SDA2REL	108
-+#define R_PPC_EMB_SDA21		109	/* 16 bit offset in SDA */
-+#define R_PPC_EMB_MRKREF	110
-+#define R_PPC_EMB_RELSEC16	111
-+#define R_PPC_EMB_RELST_LO	112
-+#define R_PPC_EMB_RELST_HI	113
-+#define R_PPC_EMB_RELST_HA	114
-+#define R_PPC_EMB_BIT_FLD	115
-+#define R_PPC_EMB_RELSDA	116	/* 16 bit relative offset in SDA */
-+
-+/* Diab tool relocations.  */
-+#define R_PPC_DIAB_SDA21_LO	180	/* like EMB_SDA21, but lower 16 bit */
-+#define R_PPC_DIAB_SDA21_HI	181	/* like EMB_SDA21, but high 16 bit */
-+#define R_PPC_DIAB_SDA21_HA	182	/* like EMB_SDA21, adjusted high 16 */
-+#define R_PPC_DIAB_RELSDA_LO	183	/* like EMB_RELSDA, but lower 16 bit */
-+#define R_PPC_DIAB_RELSDA_HI	184	/* like EMB_RELSDA, but high 16 bit */
-+#define R_PPC_DIAB_RELSDA_HA	185	/* like EMB_RELSDA, adjusted high 16 */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC_IRELATIVE		248
-+
-+/* GNU relocs used in PIC code sequences.  */
-+#define R_PPC_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC_REL16_LO		250	/* half16   (sym+add-.)@l */
-+#define R_PPC_REL16_HI		251	/* half16   (sym+add-.)@h */
-+#define R_PPC_REL16_HA		252	/* half16   (sym+add-.)@ha */
-+
-+/* This is a phony reloc to handle any old fashioned TOC16 references
-+   that may still be in object files.  */
-+#define R_PPC_TOC16		255
-+
-+/* PowerPC specific values for the Dyn d_tag field.  */
-+#define DT_PPC_GOT		(DT_LOPROC + 0)
-+#define DT_PPC_NUM		1
-+
-+/* PowerPC64 relocations defined by the ABIs */
-+#define R_PPC64_NONE		R_PPC_NONE
-+#define R_PPC64_ADDR32		R_PPC_ADDR32 /* 32bit absolute address */
-+#define R_PPC64_ADDR24		R_PPC_ADDR24 /* 26bit address, word aligned */
-+#define R_PPC64_ADDR16		R_PPC_ADDR16 /* 16bit absolute address */
-+#define R_PPC64_ADDR16_LO	R_PPC_ADDR16_LO	/* lower 16bits of address */
-+#define R_PPC64_ADDR16_HI	R_PPC_ADDR16_HI	/* high 16bits of address. */
-+#define R_PPC64_ADDR16_HA	R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-+#define R_PPC64_ADDR14		R_PPC_ADDR14 /* 16bit address, word aligned */
-+#define R_PPC64_ADDR14_BRTAKEN	R_PPC_ADDR14_BRTAKEN
-+#define R_PPC64_ADDR14_BRNTAKEN	R_PPC_ADDR14_BRNTAKEN
-+#define R_PPC64_REL24		R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
-+#define R_PPC64_REL14		R_PPC_REL14 /* PC relative 16 bit */
-+#define R_PPC64_REL14_BRTAKEN	R_PPC_REL14_BRTAKEN
-+#define R_PPC64_REL14_BRNTAKEN	R_PPC_REL14_BRNTAKEN
-+#define R_PPC64_GOT16		R_PPC_GOT16
-+#define R_PPC64_GOT16_LO	R_PPC_GOT16_LO
-+#define R_PPC64_GOT16_HI	R_PPC_GOT16_HI
-+#define R_PPC64_GOT16_HA	R_PPC_GOT16_HA
-+
-+#define R_PPC64_COPY		R_PPC_COPY
-+#define R_PPC64_GLOB_DAT	R_PPC_GLOB_DAT
-+#define R_PPC64_JMP_SLOT	R_PPC_JMP_SLOT
-+#define R_PPC64_RELATIVE	R_PPC_RELATIVE
-+
-+#define R_PPC64_UADDR32		R_PPC_UADDR32
-+#define R_PPC64_UADDR16		R_PPC_UADDR16
-+#define R_PPC64_REL32		R_PPC_REL32
-+#define R_PPC64_PLT32		R_PPC_PLT32
-+#define R_PPC64_PLTREL32	R_PPC_PLTREL32
-+#define R_PPC64_PLT16_LO	R_PPC_PLT16_LO
-+#define R_PPC64_PLT16_HI	R_PPC_PLT16_HI
-+#define R_PPC64_PLT16_HA	R_PPC_PLT16_HA
-+
-+#define R_PPC64_SECTOFF		R_PPC_SECTOFF
-+#define R_PPC64_SECTOFF_LO	R_PPC_SECTOFF_LO
-+#define R_PPC64_SECTOFF_HI	R_PPC_SECTOFF_HI
-+#define R_PPC64_SECTOFF_HA	R_PPC_SECTOFF_HA
-+#define R_PPC64_ADDR30		37 /* word30 (S + A - P) >> 2 */
-+#define R_PPC64_ADDR64		38 /* doubleword64 S + A */
-+#define R_PPC64_ADDR16_HIGHER	39 /* half16 #higher(S + A) */
-+#define R_PPC64_ADDR16_HIGHERA	40 /* half16 #highera(S + A) */
-+#define R_PPC64_ADDR16_HIGHEST	41 /* half16 #highest(S + A) */
-+#define R_PPC64_ADDR16_HIGHESTA	42 /* half16 #highesta(S + A) */
-+#define R_PPC64_UADDR64		43 /* doubleword64 S + A */
-+#define R_PPC64_REL64		44 /* doubleword64 S + A - P */
-+#define R_PPC64_PLT64		45 /* doubleword64 L + A */
-+#define R_PPC64_PLTREL64	46 /* doubleword64 L + A - P */
-+#define R_PPC64_TOC16		47 /* half16* S + A - .TOC */
-+#define R_PPC64_TOC16_LO	48 /* half16 #lo(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HI	49 /* half16 #hi(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HA	50 /* half16 #ha(S + A - .TOC.) */
-+#define R_PPC64_TOC		51 /* doubleword64 .TOC */
-+#define R_PPC64_PLTGOT16	52 /* half16* M + A */
-+#define R_PPC64_PLTGOT16_LO	53 /* half16 #lo(M + A) */
-+#define R_PPC64_PLTGOT16_HI	54 /* half16 #hi(M + A) */
-+#define R_PPC64_PLTGOT16_HA	55 /* half16 #ha(M + A) */
-+
-+#define R_PPC64_ADDR16_DS	56 /* half16ds* (S + A) >> 2 */
-+#define R_PPC64_ADDR16_LO_DS	57 /* half16ds  #lo(S + A) >> 2 */
-+#define R_PPC64_GOT16_DS	58 /* half16ds* (G + A) >> 2 */
-+#define R_PPC64_GOT16_LO_DS	59 /* half16ds  #lo(G + A) >> 2 */
-+#define R_PPC64_PLT16_LO_DS	60 /* half16ds  #lo(L + A) >> 2 */
-+#define R_PPC64_SECTOFF_DS	61 /* half16ds* (R + A) >> 2 */
-+#define R_PPC64_SECTOFF_LO_DS	62 /* half16ds  #lo(R + A) >> 2 */
-+#define R_PPC64_TOC16_DS	63 /* half16ds* (S + A - .TOC.) >> 2 */
-+#define R_PPC64_TOC16_LO_DS	64 /* half16ds  #lo(S + A - .TOC.) >> 2 */
-+#define R_PPC64_PLTGOT16_DS	65 /* half16ds* (M + A) >> 2 */
-+#define R_PPC64_PLTGOT16_LO_DS	66 /* half16ds  #lo(M + A) >> 2 */
-+
-+/* PowerPC64 relocations defined for the TLS access ABI.  */
-+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
-+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
-+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
-+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
-+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
-+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
-+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
-+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
-+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
-+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
-+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
-+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
-+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
-+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
-+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC64_JMP_IREL	247
-+#define R_PPC64_IRELATIVE	248
-+#define R_PPC64_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC64_REL16_LO	250	/* half16   (sym+add-.)@l */
-+#define R_PPC64_REL16_HI	251	/* half16   (sym+add-.)@h */
-+#define R_PPC64_REL16_HA	252	/* half16   (sym+add-.)@ha */
-+
-+/* PowerPC64 specific values for the Dyn d_tag field.  */
-+#define DT_PPC64_GLINK  (DT_LOPROC + 0)
-+#define DT_PPC64_OPD	(DT_LOPROC + 1)
-+#define DT_PPC64_OPDSZ	(DT_LOPROC + 2)
-+#define DT_PPC64_NUM    3
-+
-+
-+/* ARM specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_ARM_RELEXEC		0x01
-+#define EF_ARM_HASENTRY		0x02
-+#define EF_ARM_INTERWORK	0x04
-+#define EF_ARM_APCS_26		0x08
-+#define EF_ARM_APCS_FLOAT	0x10
-+#define EF_ARM_PIC		0x20
-+#define EF_ARM_ALIGN8		0x40 /* 8-bit structure alignment is in use */
-+#define EF_ARM_NEW_ABI		0x80
-+#define EF_ARM_OLD_ABI		0x100
-+#define EF_ARM_SOFT_FLOAT	0x200
-+#define EF_ARM_VFP_FLOAT	0x400
-+#define EF_ARM_MAVERICK_FLOAT	0x800
-+
-+
-+/* Other constants defined in the ARM ELF spec. version B-01.  */
-+/* NB. These conflict with values defined above.  */
-+#define EF_ARM_SYMSARESORTED	0x04
-+#define EF_ARM_DYNSYMSUSESEGIDX	0x08
-+#define EF_ARM_MAPSYMSFIRST	0x10
-+#define EF_ARM_EABIMASK		0XFF000000
-+
-+/* Constants defined in AAELF.  */
-+#define EF_ARM_BE8	    0x00800000
-+#define EF_ARM_LE8	    0x00400000
-+
-+#define EF_ARM_EABI_VERSION(flags)	((flags) & EF_ARM_EABIMASK)
-+#define EF_ARM_EABI_UNKNOWN	0x00000000
-+#define EF_ARM_EABI_VER1	0x01000000
-+#define EF_ARM_EABI_VER2	0x02000000
-+#define EF_ARM_EABI_VER3	0x03000000
-+#define EF_ARM_EABI_VER4	0x04000000
-+#define EF_ARM_EABI_VER5	0x05000000
-+
-+/* Additional symbol types for Thumb.  */
-+#define STT_ARM_TFUNC		STT_LOPROC /* A Thumb function.  */
-+#define STT_ARM_16BIT		STT_HIPROC /* A Thumb label.  */
-+
-+/* ARM-specific values for sh_flags */
-+#define SHF_ARM_ENTRYSECT	0x10000000 /* Section contains an entry point */
-+#define SHF_ARM_COMDEF		0x80000000 /* Section may be multiply defined
-+					      in the input to a link step.  */
-+
-+/* ARM-specific program header flags */
-+#define PF_ARM_SB		0x10000000 /* Segment contains the location
-+					      addressed by the static base. */
-+#define PF_ARM_PI		0x20000000 /* Position-independent segment.  */
-+#define PF_ARM_ABS		0x40000000 /* Absolute segment.  */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_ARM_EXIDX		(PT_LOPROC + 1)	/* ARM unwind segment.  */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_ARM_EXIDX		(SHT_LOPROC + 1) /* ARM unwind section.  */
-+#define SHT_ARM_PREEMPTMAP	(SHT_LOPROC + 2) /* Preemption details.  */
-+#define SHT_ARM_ATTRIBUTES	(SHT_LOPROC + 3) /* ARM attributes section.  */
-+
-+
-+/* ARM relocs.  */
-+
-+#define R_ARM_NONE		0	/* No reloc */
-+#define R_ARM_PC24		1	/* PC relative 26 bit branch */
-+#define R_ARM_ABS32		2	/* Direct 32 bit  */
-+#define R_ARM_REL32		3	/* PC relative 32 bit */
-+#define R_ARM_PC13		4
-+#define R_ARM_ABS16		5	/* Direct 16 bit */
-+#define R_ARM_ABS12		6	/* Direct 12 bit */
-+#define R_ARM_THM_ABS5		7
-+#define R_ARM_ABS8		8	/* Direct 8 bit */
-+#define R_ARM_SBREL32		9
-+#define R_ARM_THM_PC22		10
-+#define R_ARM_THM_PC8		11
-+#define R_ARM_AMP_VCALL9	12
-+#define R_ARM_SWI24		13	/* Obsolete static relocation.  */
-+#define R_ARM_TLS_DESC		13      /* Dynamic relocation.  */
-+#define R_ARM_THM_SWI8		14
-+#define R_ARM_XPC25		15
-+#define R_ARM_THM_XPC22		16
-+#define R_ARM_TLS_DTPMOD32	17	/* ID of module containing symbol */
-+#define R_ARM_TLS_DTPOFF32	18	/* Offset in TLS block */
-+#define R_ARM_TLS_TPOFF32	19	/* Offset in static TLS block */
-+#define R_ARM_COPY		20	/* Copy symbol at runtime */
-+#define R_ARM_GLOB_DAT		21	/* Create GOT entry */
-+#define R_ARM_JUMP_SLOT		22	/* Create PLT entry */
-+#define R_ARM_RELATIVE		23	/* Adjust by program base */
-+#define R_ARM_GOTOFF		24	/* 32 bit offset to GOT */
-+#define R_ARM_GOTPC		25	/* 32 bit PC relative offset to GOT */
-+#define R_ARM_GOT32		26	/* 32 bit GOT entry */
-+#define R_ARM_PLT32		27	/* 32 bit PLT address */
-+#define R_ARM_ALU_PCREL_7_0	32
-+#define R_ARM_ALU_PCREL_15_8	33
-+#define R_ARM_ALU_PCREL_23_15	34
-+#define R_ARM_LDR_SBREL_11_0	35
-+#define R_ARM_ALU_SBREL_19_12	36
-+#define R_ARM_ALU_SBREL_27_20	37
-+#define R_ARM_TLS_GOTDESC	90
-+#define R_ARM_TLS_CALL		91
-+#define R_ARM_TLS_DESCSEQ	92
-+#define R_ARM_THM_TLS_CALL	93
-+#define R_ARM_GNU_VTENTRY	100
-+#define R_ARM_GNU_VTINHERIT	101
-+#define R_ARM_THM_PC11		102	/* thumb unconditional branch */
-+#define R_ARM_THM_PC9		103	/* thumb conditional branch */
-+#define R_ARM_TLS_GD32		104	/* PC-rel 32 bit for global dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDM32		105	/* PC-rel 32 bit for local dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDO32		106	/* 32 bit offset relative to TLS
-+					   block */
-+#define R_ARM_TLS_IE32		107	/* PC-rel 32 bit for GOT entry of
-+					   static TLS block offset */
-+#define R_ARM_TLS_LE32		108	/* 32 bit offset relative to static
-+					   TLS block */
-+#define	R_ARM_THM_TLS_DESCSEQ	129
-+#define R_ARM_IRELATIVE		160
-+#define R_ARM_RXPC25		249
-+#define R_ARM_RSBREL32		250
-+#define R_ARM_THM_RPC22		251
-+#define R_ARM_RREL32		252
-+#define R_ARM_RABS22		253
-+#define R_ARM_RPC24		254
-+#define R_ARM_RBASE		255
-+/* Keep this the last entry.  */
-+#define R_ARM_NUM		256
-+
-+/* IA-64 specific declarations.  */
-+
-+/* Processor specific flags for the Ehdr e_flags field.  */
-+#define EF_IA_64_MASKOS		0x0000000f	/* os-specific flags */
-+#define EF_IA_64_ABI64		0x00000010	/* 64-bit ABI */
-+#define EF_IA_64_ARCH		0xff000000	/* arch. version mask */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_IA_64_ARCHEXT	(PT_LOPROC + 0)	/* arch extension bits */
-+#define PT_IA_64_UNWIND		(PT_LOPROC + 1)	/* ia64 unwind bits */
-+#define PT_IA_64_HP_OPT_ANOT	(PT_LOOS + 0x12)
-+#define PT_IA_64_HP_HSL_ANOT	(PT_LOOS + 0x13)
-+#define PT_IA_64_HP_STACK	(PT_LOOS + 0x14)
-+
-+/* Processor specific flags for the Phdr p_flags field.  */
-+#define PF_IA_64_NORECOV	0x80000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_IA_64_EXT		(SHT_LOPROC + 0) /* extension bits */
-+#define SHT_IA_64_UNWIND	(SHT_LOPROC + 1) /* unwind bits */
-+
-+/* Processor specific flags for the Shdr sh_flags field.  */
-+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
-+#define SHF_IA_64_NORECOV	0x20000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Dyn d_tag field.  */
-+#define DT_IA_64_PLT_RESERVE	(DT_LOPROC + 0)
-+#define DT_IA_64_NUM		1
-+
-+/* IA-64 relocations.  */
-+#define R_IA64_NONE		0x00	/* none */
-+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
-+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
-+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
-+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
-+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
-+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
-+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
-+#define R_IA64_GPREL22		0x2a	/* @gprel(sym + add), add imm22 */
-+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym + add), mov imm64 */
-+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym + add), data4 MSB */
-+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym + add), data4 LSB */
-+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym + add), data8 MSB */
-+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym + add), add imm22 */
-+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym + add), add imm22 */
-+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym + add), data8 MSB */
-+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym + add), data8 LSB */
-+#define R_IA64_FPTR64I		0x43	/* @fptr(sym + add), mov imm64 */
-+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym + add), data4 MSB */
-+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym + add), data4 LSB */
-+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym + add), data8 MSB */
-+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym + add), data8 LSB */
-+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym + add), brl */
-+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym + add), ptb, call */
-+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym + add), chk.s */
-+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym + add), fchkf */
-+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym + add), data4 MSB */
-+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym + add), data4 LSB */
-+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym + add), data8 MSB */
-+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
-+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
-+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), data4 MSB */
-+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), data4 LSB */
-+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), data8 MSB */
-+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), data8 LSB */
-+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym + add), data4 MSB */
-+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym + add), data4 LSB */
-+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym + add), data8 MSB */
-+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym + add), data8 LSB */
-+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym + add), data4 MSB */
-+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym + add), data4 LSB */
-+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym + add), data8 MSB */
-+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym + add), data8 LSB */
-+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
-+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
-+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
-+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
-+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
-+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
-+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
-+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
-+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym + add), 21bit inst */
-+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym + add), 22bit inst */
-+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym + add), 64bit inst */
-+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
-+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
-+#define R_IA64_COPY		0x84	/* copy relocation */
-+#define R_IA64_SUB		0x85	/* Addend and symbol difference */
-+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
-+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
-+#define R_IA64_TPREL14		0x91	/* @tprel(sym + add), imm14 */
-+#define R_IA64_TPREL22		0x92	/* @tprel(sym + add), imm22 */
-+#define R_IA64_TPREL64I		0x93	/* @tprel(sym + add), imm64 */
-+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym + add), data8 MSB */
-+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), imm2 */
-+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym + add), data8 MSB */
-+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(sym + add)), imm22 */
-+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym + add), imm14 */
-+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym + add), imm22 */
-+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym + add), imm64 */
-+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym + add), data4 MSB */
-+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym + add), data4 LSB */
-+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym + add), data8 MSB */
-+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
-+
-+/* SH specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_SH_MACH_MASK		0x1f
-+#define EF_SH_UNKNOWN		0x0
-+#define EF_SH1			0x1
-+#define EF_SH2			0x2
-+#define EF_SH3			0x3
-+#define EF_SH_DSP		0x4
-+#define EF_SH3_DSP		0x5
-+#define EF_SH4AL_DSP		0x6
-+#define EF_SH3E			0x8
-+#define EF_SH4			0x9
-+#define EF_SH2E			0xb
-+#define EF_SH4A			0xc
-+#define EF_SH2A			0xd
-+#define EF_SH4_NOFPU		0x10
-+#define EF_SH4A_NOFPU		0x11
-+#define EF_SH4_NOMMU_NOFPU	0x12
-+#define EF_SH2A_NOFPU		0x13
-+#define EF_SH3_NOMMU		0x14
-+#define EF_SH2A_SH4_NOFPU	0x15
-+#define EF_SH2A_SH3_NOFPU	0x16
-+#define EF_SH2A_SH4		0x17
-+#define EF_SH2A_SH3E		0x18
-+
-+/* SH relocs.  */
-+#define	R_SH_NONE		0
-+#define	R_SH_DIR32		1
-+#define	R_SH_REL32		2
-+#define	R_SH_DIR8WPN		3
-+#define	R_SH_IND12W		4
-+#define	R_SH_DIR8WPL		5
-+#define	R_SH_DIR8WPZ		6
-+#define	R_SH_DIR8BP		7
-+#define	R_SH_DIR8W		8
-+#define	R_SH_DIR8L		9
-+#define	R_SH_SWITCH16		25
-+#define	R_SH_SWITCH32		26
-+#define	R_SH_USES		27
-+#define	R_SH_COUNT		28
-+#define	R_SH_ALIGN		29
-+#define	R_SH_CODE		30
-+#define	R_SH_DATA		31
-+#define	R_SH_LABEL		32
-+#define	R_SH_SWITCH8		33
-+#define	R_SH_GNU_VTINHERIT	34
-+#define	R_SH_GNU_VTENTRY	35
-+#define	R_SH_TLS_GD_32		144
-+#define	R_SH_TLS_LD_32		145
-+#define	R_SH_TLS_LDO_32		146
-+#define	R_SH_TLS_IE_32		147
-+#define	R_SH_TLS_LE_32		148
-+#define	R_SH_TLS_DTPMOD32	149
-+#define	R_SH_TLS_DTPOFF32	150
-+#define	R_SH_TLS_TPOFF32	151
-+#define	R_SH_GOT32		160
-+#define	R_SH_PLT32		161
-+#define	R_SH_COPY		162
-+#define	R_SH_GLOB_DAT		163
-+#define	R_SH_JMP_SLOT		164
-+#define	R_SH_RELATIVE		165
-+#define	R_SH_GOTOFF		166
-+#define	R_SH_GOTPC		167
-+/* Keep this the last entry.  */
-+#define	R_SH_NUM		256
-+
-+/* S/390 specific definitions.  */
-+
-+/* Valid values for the e_flags field.  */
-+
-+#define EF_S390_HIGH_GPRS    0x00000001  /* High GPRs kernel facility needed.  */
-+
-+/* Additional s390 relocs */
-+
-+#define R_390_NONE		0	/* No reloc.  */
-+#define R_390_8			1	/* Direct 8 bit.  */
-+#define R_390_12		2	/* Direct 12 bit.  */
-+#define R_390_16		3	/* Direct 16 bit.  */
-+#define R_390_32		4	/* Direct 32 bit.  */
-+#define R_390_PC32		5	/* PC relative 32 bit.	*/
-+#define R_390_GOT12		6	/* 12 bit GOT offset.  */
-+#define R_390_GOT32		7	/* 32 bit GOT offset.  */
-+#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
-+#define R_390_COPY		9	/* Copy symbol at runtime.  */
-+#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
-+#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
-+#define R_390_RELATIVE		12	/* Adjust by program base.  */
-+#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
-+#define R_390_GOTPC		14	/* 32 bit PC relative offset to GOT.  */
-+#define R_390_GOT16		15	/* 16 bit GOT offset.  */
-+#define R_390_PC16		16	/* PC relative 16 bit.	*/
-+#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
-+#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
-+#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
-+#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
-+#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
-+#define R_390_64		22	/* Direct 64 bit.  */
-+#define R_390_PC64		23	/* PC relative 64 bit.	*/
-+#define R_390_GOT64		24	/* 64 bit GOT offset.  */
-+#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
-+#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
-+#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
-+#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
-+#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
-+#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
-+#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
-+#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
-+#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
-+#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
-+#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code.  */
-+#define R_390_TLS_GDCALL	38	/* Tag for function call in general
-+					   dynamic TLS code. */
-+#define R_390_TLS_LDCALL	39	/* Tag for function call in local
-+					   dynamic TLS code. */
-+#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
-+					   thread local data.  */
-+#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
-+					  thread local data.  */
-+#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
-+					   block offset. */
-+#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
-+#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.	 */
-+#define R_390_TLS_TPOFF		56	/* Negated offset in static TLS
-+					   block.  */
-+#define R_390_20		57	/* Direct 20 bit.  */
-+#define R_390_GOT20		58	/* 20 bit GOT offset.  */
-+#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
-+#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_IRELATIVE         61      /* STT_GNU_IFUNC relocation.  */
-+/* Keep this the last entry.  */
-+#define R_390_NUM		62
-+
-+
-+/* CRIS relocations.  */
-+#define R_CRIS_NONE		0
-+#define R_CRIS_8		1
-+#define R_CRIS_16		2
-+#define R_CRIS_32		3
-+#define R_CRIS_8_PCREL		4
-+#define R_CRIS_16_PCREL		5
-+#define R_CRIS_32_PCREL		6
-+#define R_CRIS_GNU_VTINHERIT	7
-+#define R_CRIS_GNU_VTENTRY	8
-+#define R_CRIS_COPY		9
-+#define R_CRIS_GLOB_DAT		10
-+#define R_CRIS_JUMP_SLOT	11
-+#define R_CRIS_RELATIVE		12
-+#define R_CRIS_16_GOT		13
-+#define R_CRIS_32_GOT		14
-+#define R_CRIS_16_GOTPLT	15
-+#define R_CRIS_32_GOTPLT	16
-+#define R_CRIS_32_GOTREL	17
-+#define R_CRIS_32_PLT_GOTREL	18
-+#define R_CRIS_32_PLT_PCREL	19
-+
-+#define R_CRIS_NUM		20
-+
-+
-+/* AMD x86-64 relocations.  */
-+#define R_X86_64_NONE		0	/* No reloc */
-+#define R_X86_64_64		1	/* Direct 64 bit  */
-+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
-+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
-+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
-+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
-+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
-+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
-+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
-+#define R_X86_64_GOTPCREL	9	/* 32 bit signed PC relative
-+					   offset to GOT */
-+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
-+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
-+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
-+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
-+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
-+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
-+#define R_X86_64_DTPMOD64	16	/* ID of module containing symbol */
-+#define R_X86_64_DTPOFF64	17	/* Offset in module's TLS block */
-+#define R_X86_64_TPOFF64	18	/* Offset in initial TLS block */
-+#define R_X86_64_TLSGD		19	/* 32 bit signed PC relative offset
-+					   to two GOT entries for GD symbol */
-+#define R_X86_64_TLSLD		20	/* 32 bit signed PC relative offset
-+					   to two GOT entries for LD symbol */
-+#define R_X86_64_DTPOFF32	21	/* Offset in TLS block */
-+#define R_X86_64_GOTTPOFF	22	/* 32 bit signed PC relative offset
-+					   to GOT entry for IE symbol */
-+#define R_X86_64_TPOFF32	23	/* Offset in initial TLS block */
-+#define R_X86_64_PC64		24	/* PC relative 64 bit */
-+#define R_X86_64_GOTOFF64	25	/* 64 bit offset to GOT */
-+#define R_X86_64_GOTPC32	26	/* 32 bit signed pc relative
-+					   offset to GOT */
-+#define R_X86_64_GOT64		27	/* 64-bit GOT entry offset */
-+#define R_X86_64_GOTPCREL64	28	/* 64-bit PC relative offset
-+					   to GOT entry */
-+#define R_X86_64_GOTPC64	29	/* 64-bit PC relative offset to GOT */
-+#define R_X86_64_GOTPLT64	30 	/* like GOT64, says PLT entry needed */
-+#define R_X86_64_PLTOFF64	31	/* 64-bit GOT relative offset
-+					   to PLT entry */
-+#define R_X86_64_SIZE32		32	/* Size of symbol plus 32-bit addend */
-+#define R_X86_64_SIZE64		33	/* Size of symbol plus 64-bit addend */
-+#define R_X86_64_GOTPC32_TLSDESC 34	/* GOT offset for TLS descriptor.  */
-+#define R_X86_64_TLSDESC_CALL   35	/* Marker for call through TLS
-+					   descriptor.  */
-+#define R_X86_64_TLSDESC        36	/* TLS descriptor.  */
-+#define R_X86_64_IRELATIVE	37	/* Adjust indirectly by program base */
-+#define R_X86_64_RELATIVE64	38	/* 64-bit adjust by program base */
-+
-+#define R_X86_64_NUM		39
-+
-+
-+/* AM33 relocations.  */
-+#define R_MN10300_NONE		0	/* No reloc.  */
-+#define R_MN10300_32		1	/* Direct 32 bit.  */
-+#define R_MN10300_16		2	/* Direct 16 bit.  */
-+#define R_MN10300_8		3	/* Direct 8 bit.  */
-+#define R_MN10300_PCREL32	4	/* PC-relative 32-bit.  */
-+#define R_MN10300_PCREL16	5	/* PC-relative 16-bit signed.  */
-+#define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
-+#define R_MN10300_GNU_VTINHERIT	7	/* Ancient C++ vtable garbage... */
-+#define R_MN10300_GNU_VTENTRY	8	/* ... collection annotation.  */
-+#define R_MN10300_24		9	/* Direct 24 bit.  */
-+#define R_MN10300_GOTPC32	10	/* 32-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTPC16	11	/* 16-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTOFF32	12	/* 32-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF24	13	/* 24-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF16	14	/* 16-bit offset from GOT.  */
-+#define R_MN10300_PLT32		15	/* 32-bit PCrel to PLT entry.  */
-+#define R_MN10300_PLT16		16	/* 16-bit PCrel to PLT entry.  */
-+#define R_MN10300_GOT32		17	/* 32-bit offset to GOT entry.  */
-+#define R_MN10300_GOT24		18	/* 24-bit offset to GOT entry.  */
-+#define R_MN10300_GOT16		19	/* 16-bit offset to GOT entry.  */
-+#define R_MN10300_COPY		20	/* Copy symbol at runtime.  */
-+#define R_MN10300_GLOB_DAT	21	/* Create GOT entry.  */
-+#define R_MN10300_JMP_SLOT	22	/* Create PLT entry.  */
-+#define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
-+
-+#define R_MN10300_NUM		24
-+
-+
-+/* M32R relocs.  */
-+#define R_M32R_NONE		0	/* No reloc. */
-+#define R_M32R_16		1	/* Direct 16 bit. */
-+#define R_M32R_32		2	/* Direct 32 bit. */
-+#define R_M32R_24		3	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL		4	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL		5	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL		6	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO		7	/* High 16 bit with unsigned low. */
-+#define R_M32R_HI16_SLO		8	/* High 16 bit with signed low. */
-+#define R_M32R_LO16		9	/* Low 16 bit. */
-+#define R_M32R_SDA16		10	/* 16 bit offset in SDA. */
-+#define R_M32R_GNU_VTINHERIT	11
-+#define R_M32R_GNU_VTENTRY	12
-+/* M32R relocs use SHT_RELA.  */
-+#define R_M32R_16_RELA		33	/* Direct 16 bit. */
-+#define R_M32R_32_RELA		34	/* Direct 32 bit. */
-+#define R_M32R_24_RELA		35	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL_RELA	36	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL_RELA	37	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL_RELA	38	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO_RELA	39	/* High 16 bit with unsigned low */
-+#define R_M32R_HI16_SLO_RELA	40	/* High 16 bit with signed low */
-+#define R_M32R_LO16_RELA	41	/* Low 16 bit */
-+#define R_M32R_SDA16_RELA	42	/* 16 bit offset in SDA */
-+#define R_M32R_RELA_GNU_VTINHERIT	43
-+#define R_M32R_RELA_GNU_VTENTRY	44
-+#define R_M32R_REL32		45	/* PC relative 32 bit.  */
-+
-+#define R_M32R_GOT24		48	/* 24 bit GOT entry */
-+#define R_M32R_26_PLTREL	49	/* 26 bit PC relative to PLT shifted */
-+#define R_M32R_COPY		50	/* Copy symbol at runtime */
-+#define R_M32R_GLOB_DAT		51	/* Create GOT entry */
-+#define R_M32R_JMP_SLOT		52	/* Create PLT entry */
-+#define R_M32R_RELATIVE		53	/* Adjust by program base */
-+#define R_M32R_GOTOFF		54	/* 24 bit offset to GOT */
-+#define R_M32R_GOTPC24		55	/* 24 bit PC relative offset to GOT */
-+#define R_M32R_GOT16_HI_ULO	56	/* High 16 bit GOT entry with unsigned
-+					   low */
-+#define R_M32R_GOT16_HI_SLO	57	/* High 16 bit GOT entry with signed
-+					   low */
-+#define R_M32R_GOT16_LO		58	/* Low 16 bit GOT entry */
-+#define R_M32R_GOTPC_HI_ULO	59	/* High 16 bit PC relative offset to
-+					   GOT with unsigned low */
-+#define R_M32R_GOTPC_HI_SLO	60	/* High 16 bit PC relative offset to
-+					   GOT with signed low */
-+#define R_M32R_GOTPC_LO		61	/* Low 16 bit PC relative offset to
-+					   GOT */
-+#define R_M32R_GOTOFF_HI_ULO	62	/* High 16 bit offset to GOT
-+					   with unsigned low */
-+#define R_M32R_GOTOFF_HI_SLO	63	/* High 16 bit offset to GOT
-+					   with signed low */
-+#define R_M32R_GOTOFF_LO	64	/* Low 16 bit offset to GOT */
-+#define R_M32R_NUM		256	/* Keep this the last entry. */
-+
-+
-+/* TILEPro relocations.  */
-+#define R_TILEPRO_NONE		0	/* No reloc */
-+#define R_TILEPRO_32		1	/* Direct 32 bit */
-+#define R_TILEPRO_16		2	/* Direct 16 bit */
-+#define R_TILEPRO_8		3	/* Direct 8 bit */
-+#define R_TILEPRO_32_PCREL	4	/* PC relative 32 bit */
-+#define R_TILEPRO_16_PCREL	5	/* PC relative 16 bit */
-+#define R_TILEPRO_8_PCREL	6	/* PC relative 8 bit */
-+#define R_TILEPRO_LO16		7	/* Low 16 bit */
-+#define R_TILEPRO_HI16		8	/* High 16 bit */
-+#define R_TILEPRO_HA16		9	/* High 16 bit, adjusted */
-+#define R_TILEPRO_COPY		10	/* Copy relocation */
-+#define R_TILEPRO_GLOB_DAT	11	/* Create GOT entry */
-+#define R_TILEPRO_JMP_SLOT	12	/* Create PLT entry */
-+#define R_TILEPRO_RELATIVE	13	/* Adjust by program base */
-+#define R_TILEPRO_BROFF_X1	14	/* X1 pipe branch offset */
-+#define R_TILEPRO_JOFFLONG_X1	15	/* X1 pipe jump offset */
-+#define R_TILEPRO_JOFFLONG_X1_PLT 16	/* X1 pipe jump offset to PLT */
-+#define R_TILEPRO_IMM8_X0	17	/* X0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y0	18	/* Y0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_X1	19	/* X1 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y1	20	/* Y1 pipe 8-bit */
-+#define R_TILEPRO_MT_IMM15_X1	21	/* X1 pipe mtspr */
-+#define R_TILEPRO_MF_IMM15_X1	22	/* X1 pipe mfspr */
-+#define R_TILEPRO_IMM16_X0	23	/* X0 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X1	24	/* X1 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X0_LO	25	/* X0 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X1_LO	26	/* X1 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X0_HI	27	/* X0 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X1_HI	28	/* X1 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X0_HA	29	/* X0 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X1_HA	30	/* X1 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X0_PCREL 31	/* X0 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X1_PCREL 32	/* X1 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X0_LO_PCREL 33	/* X0 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X1_LO_PCREL 34	/* X1 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X0_HI_PCREL 35	/* X0 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X1_HI_PCREL 36	/* X1 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X0_HA_PCREL 37	/* X0 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X1_HA_PCREL 38	/* X1 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X0_GOT	39	/* X0 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT	40	/* X1 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_LO 41	/* X0 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_LO 42	/* X1 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HI 43	/* X0 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HI 44	/* X1 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HA 45	/* X0 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HA 46	/* X1 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_MMSTART_X0	47	/* X0 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X0	48	/* X0 pipe mm "end" */
-+#define R_TILEPRO_MMSTART_X1	49	/* X1 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X1	50	/* X1 pipe mm "end" */
-+#define R_TILEPRO_SHAMT_X0	51	/* X0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_X1	52	/* X1 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y0	53	/* Y0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y1	54	/* Y1 pipe shift amount */
-+#define R_TILEPRO_DEST_IMM8_X1	55	/* X1 pipe destination 8-bit */
-+/* Relocs 56-59 are currently not defined.  */
-+#define R_TILEPRO_TLS_GD_CALL	60	/* "jal" for TLS GD */
-+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_TLS_IE_LOAD	65	/* "lw_tls" for TLS IE */
-+#define R_TILEPRO_IMM16_X0_TLS_GD 66	/* X0 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD 67	/* X1 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68	/* X0 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69	/* X1 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70	/* X0 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71	/* X1 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72	/* X0 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73	/* X1 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE 74	/* X0 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE 75	/* X1 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76	/* X0 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77	/* X1 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78	/* X0 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79	/* X1 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80	/* X0 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81	/* X1 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_TLS_DTPMOD32	82	/* ID of module containing symbol */
-+#define R_TILEPRO_TLS_DTPOFF32	83	/* Offset in TLS block */
-+#define R_TILEPRO_TLS_TPOFF32	84	/* Offset in static TLS block */
-+#define R_TILEPRO_IMM16_X0_TLS_LE 85	/* X0 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE 86	/* X1 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87	/* X0 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88	/* X1 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89	/* X0 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90	/* X1 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91	/* X0 pipe ha() 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92	/* X1 pipe ha() 16-bit TLS LE offset */
-+
-+#define R_TILEPRO_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEPRO_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEPRO_NUM		130
-+
-+
-+/* TILE-Gx relocations.  */
-+#define R_TILEGX_NONE		0	/* No reloc */
-+#define R_TILEGX_64		1	/* Direct 64 bit */
-+#define R_TILEGX_32		2	/* Direct 32 bit */
-+#define R_TILEGX_16		3	/* Direct 16 bit */
-+#define R_TILEGX_8		4	/* Direct 8 bit */
-+#define R_TILEGX_64_PCREL	5	/* PC relative 64 bit */
-+#define R_TILEGX_32_PCREL	6	/* PC relative 32 bit */
-+#define R_TILEGX_16_PCREL	7	/* PC relative 16 bit */
-+#define R_TILEGX_8_PCREL	8	/* PC relative 8 bit */
-+#define R_TILEGX_HW0		9	/* hword 0 16-bit */
-+#define R_TILEGX_HW1		10	/* hword 1 16-bit */
-+#define R_TILEGX_HW2		11	/* hword 2 16-bit */
-+#define R_TILEGX_HW3		12	/* hword 3 16-bit */
-+#define R_TILEGX_HW0_LAST	13	/* last hword 0 16-bit */
-+#define R_TILEGX_HW1_LAST	14	/* last hword 1 16-bit */
-+#define R_TILEGX_HW2_LAST	15	/* last hword 2 16-bit */
-+#define R_TILEGX_COPY		16	/* Copy relocation */
-+#define R_TILEGX_GLOB_DAT	17	/* Create GOT entry */
-+#define R_TILEGX_JMP_SLOT	18	/* Create PLT entry */
-+#define R_TILEGX_RELATIVE	19	/* Adjust by program base */
-+#define R_TILEGX_BROFF_X1	20	/* X1 pipe branch offset */
-+#define R_TILEGX_JUMPOFF_X1	21	/* X1 pipe jump offset */
-+#define R_TILEGX_JUMPOFF_X1_PLT	22	/* X1 pipe jump offset to PLT */
-+#define R_TILEGX_IMM8_X0	23	/* X0 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y0	24	/* Y0 pipe 8-bit */
-+#define R_TILEGX_IMM8_X1	25	/* X1 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y1	26	/* Y1 pipe 8-bit */
-+#define R_TILEGX_DEST_IMM8_X1	27	/* X1 pipe destination 8-bit */
-+#define R_TILEGX_MT_IMM14_X1	28	/* X1 pipe mtspr */
-+#define R_TILEGX_MF_IMM14_X1	29	/* X1 pipe mfspr */
-+#define R_TILEGX_MMSTART_X0	30	/* X0 pipe mm "start" */
-+#define R_TILEGX_MMEND_X0	31	/* X0 pipe mm "end" */
-+#define R_TILEGX_SHAMT_X0	32	/* X0 pipe shift amount */
-+#define R_TILEGX_SHAMT_X1	33	/* X1 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y0	34	/* Y0 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y1	35	/* Y1 pipe shift amount */
-+#define R_TILEGX_IMM16_X0_HW0	36	/* X0 pipe hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0	37	/* X1 pipe hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1	38	/* X0 pipe hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1	39	/* X1 pipe hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2	40	/* X0 pipe hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2	41	/* X1 pipe hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3	42	/* X0 pipe hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3	43	/* X1 pipe hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST 44	/* X0 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST 45	/* X1 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST 46	/* X0 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST 47	/* X1 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST 48	/* X0 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST 49	/* X1 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_PCREL 50	/* X0 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_PCREL 51	/* X1 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_PCREL 52	/* X0 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_PCREL 53	/* X1 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_PCREL 54	/* X0 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_PCREL 55	/* X1 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3_PCREL 56	/* X0 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3_PCREL 57	/* X1 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_GOT 64	/* X0 pipe hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_GOT 65	/* X1 pipe hword 0 GOT offset */
-+/* Relocs 66-71 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */
-+/* Relocs 76-77 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78	/* X0 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79	/* X1 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80	/* X0 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81	/* X1 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */
-+/* Relocs 90-91 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92	/* X0 pipe hword 0 TLS IE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93	/* X1 pipe hword 0 TLS IE offset */
-+/* Relocs 94-99 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */
-+/* Relocs 104-105 are currently not defined.  */
-+#define R_TILEGX_TLS_DTPMOD64	106	/* 64-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF64	107	/* 64-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF64	108	/* 64-bit offset in static TLS block */
-+#define R_TILEGX_TLS_DTPMOD32	109	/* 32-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF32	110	/* 32-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF32	111	/* 32-bit offset in static TLS block */
-+#define R_TILEGX_TLS_GD_CALL	112	/* "jal" for TLS GD */
-+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEGX_TLS_IE_LOAD	117	/* "ld_tls" for TLS IE */
-+#define R_TILEGX_IMM8_X0_TLS_ADD 118	/* X0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_X1_TLS_ADD 119	/* X1 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y0_TLS_ADD 120	/* Y0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y1_TLS_ADD 121	/* Y1 pipe "addi" for TLS GD/IE */
-+
-+#define R_TILEGX_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEGX_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEGX_NUM		130
-+
-+#endif	/* elf.h */
---- a/scripts/mod/mk_elfconfig.c
-+++ b/scripts/mod/mk_elfconfig.c
-@@ -2,7 +2,11 @@
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
-+#ifndef __APPLE__
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- int
- main(int argc, char **argv)
---- a/scripts/mod/modpost.h
-+++ b/scripts/mod/modpost.h
-@@ -8,7 +8,11 @@
- #include <sys/mman.h>
- #include <fcntl.h>
- #include <unistd.h>
-+#if !(defined(__APPLE__) || defined(__CYGWIN__))
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- #include "elfconfig.h"
- 
diff --git a/target/linux/generic/hack-4.19/211-host_tools_portability.patch b/target/linux/generic/hack-4.19/211-host_tools_portability.patch
deleted file mode 100644
index f3c285879c..0000000000
--- a/target/linux/generic/hack-4.19/211-host_tools_portability.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 7f698012384ccb1ed10cc758acfd085096fdb307 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:02:03 +0200
-Subject: kernel: fix linux 4.9 host tools portability issues
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- tools/build/Build.include       | 2 +-
- tools/perf/pmu-events/jevents.c | 1 +
- tools/perf/pmu-events/json.c    | 1 -
- 3 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/tools/build/Build.include
-+++ b/tools/build/Build.include
-@@ -98,4 +98,4 @@ cxx_flags = -Wp,-MD,$(depfile) -Wp,-MT,$
- ###
- ## HOSTCC C flags
- 
--host_c_flags = -Wp,-MD,$(depfile) -Wp,-MT,$@ $(KBUILD_HOSTCFLAGS) -D"BUILD_STR(s)=\#s" $(HOSTCFLAGS_$(basetarget).o) $(HOSTCFLAGS_$(obj))
-+host_c_flags = -MD -MF $(depfile) -MT $@ $(CHOSTFLAGS) -D"BUILD_STR(s)=\#s" $(CHOSTFLAGS_$(basetarget).o) $(CHOSTFLAGS_$(obj))
---- a/tools/perf/pmu-events/jevents.c
-+++ b/tools/perf/pmu-events/jevents.c
-@@ -35,6 +35,7 @@
- #include <stdlib.h>
- #include <errno.h>
- #include <string.h>
-+#include <strings.h>
- #include <ctype.h>
- #include <unistd.h>
- #include <stdarg.h>
---- a/tools/perf/pmu-events/json.c
-+++ b/tools/perf/pmu-events/json.c
-@@ -38,7 +38,6 @@
- #include <unistd.h>
- #include "jsmn.h"
- #include "json.h"
--#include <linux/kernel.h>
- 
- 
- static char *mapfile(const char *fn, size_t *size)
diff --git a/target/linux/generic/hack-4.19/212-byteshift_portability.patch b/target/linux/generic/hack-4.19/212-byteshift_portability.patch
deleted file mode 100644
index 1a5ac87988..0000000000
--- a/target/linux/generic/hack-4.19/212-byteshift_portability.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 48232d3d931c95953ce2ddfe7da7bb164aef6a73 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:03:16 +0200
-Subject: linux-3.6: fix portability of some includes files in tools/ used on the host
-
-lede-commit: 6040b1d29ab1f047c5e49b748abcb6a3196add28
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- tools/include/tools/be_byteshift.h |  4 ++++
- tools/include/tools/le_byteshift.h |  4 ++++
- tools/include/tools/linux_types.h  | 22 ++++++++++++++++++++++
- 3 files changed, 30 insertions(+)
- create mode 100644 tools/include/tools/linux_types.h
-
---- a/tools/include/tools/be_byteshift.h
-+++ b/tools/include/tools/be_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_BE_BYTESHIFT_H
- #define _TOOLS_BE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_be16(const uint8_t *p)
---- a/tools/include/tools/le_byteshift.h
-+++ b/tools/include/tools/le_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_LE_BYTESHIFT_H
- #define _TOOLS_LE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_le16(const uint8_t *p)
---- /dev/null
-+++ b/tools/include/tools/linux_types.h
-@@ -0,0 +1,22 @@
-+#ifndef __LINUX_TYPES_H
-+#define __LINUX_TYPES_H
-+
-+#include <stdint.h>
-+
-+typedef uint8_t __u8;
-+typedef uint8_t __be8;
-+typedef uint8_t __le8;
-+
-+typedef uint16_t __u16;
-+typedef uint16_t __be16;
-+typedef uint16_t __le16;
-+
-+typedef uint32_t __u32;
-+typedef uint32_t __be32;
-+typedef uint32_t __le32;
-+
-+typedef uint64_t __u64;
-+typedef uint64_t __be64;
-+typedef uint64_t __le64;
-+
-+#endif
diff --git a/target/linux/generic/hack-4.19/214-spidev_h_portability.patch b/target/linux/generic/hack-4.19/214-spidev_h_portability.patch
deleted file mode 100644
index 093f600c85..0000000000
--- a/target/linux/generic/hack-4.19/214-spidev_h_portability.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From be9be95ff10e16a5b4ad36f903978d0cc5747024 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:04:08 +0200
-Subject: kernel: fix linux/spi/spidev.h portability issues with musl
-
-Felix will try to get this define included into musl
-
-lede-commit: 795e7cf60de19e7a076a46874fab7bb88b43bbff
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/spi/spidev.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/uapi/linux/spi/spidev.h
-+++ b/include/uapi/linux/spi/spidev.h
-@@ -113,7 +113,7 @@ struct spi_ioc_transfer {
- 
- /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
- #define SPI_MSGSIZE(N) \
--	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
-+	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
- 		? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
- #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
- 
diff --git a/target/linux/generic/hack-4.19/220-gc_sections.patch b/target/linux/generic/hack-4.19/220-gc_sections.patch
deleted file mode 100644
index d6fc94646e..0000000000
--- a/target/linux/generic/hack-4.19/220-gc_sections.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From e3d8676f5722b7622685581e06e8f53e6138e3ab Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 23:42:36 +0200
-Subject: use -ffunction-sections, -fdata-sections and --gc-sections
-
-In combination with kernel symbol export stripping this significantly reduces
-the kernel image size. Used on both ARM and MIPS architectures.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- Makefile                          | 10 +++----
- arch/arm/Kconfig                  |  1 +
- arch/arm/boot/compressed/Makefile |  1 +
- arch/arm/kernel/vmlinux.lds.S     | 26 ++++++++--------
- arch/mips/Kconfig                 |  1 +
- arch/mips/kernel/vmlinux.lds.S    |  4 +--
- include/asm-generic/vmlinux.lds.h | 63 ++++++++++++++++++++-------------------
- 7 files changed, 55 insertions(+), 51 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -294,6 +294,11 @@ else
- scripts/Kbuild.include: ;
- include scripts/Kbuild.include
- 
-+ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
-+KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
-+LDFLAGS_vmlinux += --gc-sections
-+endif
-+
- # Read KERNELRELEASE from include/config/kernel.release (if it exists)
- KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
- KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-@@ -780,11 +785,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
- KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
- endif
- 
--ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
--KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
--LDFLAGS_vmlinux += --gc-sections
--endif
--
- # arch Makefile may override CC so keep this after arch Makefile is included
- NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
- 
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -98,6 +98,7 @@ config ARM
- 	select HAVE_UID16
- 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
- 	select IRQ_FORCED_THREADING
-+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- 	select MODULES_USE_ELF_REL
- 	select NEED_DMA_MAP_STATE
- 	select NO_BOOTMEM
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -106,6 +106,7 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
- endif
-+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
- 
- # -fstack-protector-strong triggers protection checks in this code,
- # but it is being used too early to link to meaningful stack_chk logic.
---- a/arch/arm/kernel/vmlinux.lds.S
-+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -100,24 +100,24 @@ SECTIONS
- 	}
- 	.init.arch.info : {
- 		__arch_info_begin = .;
--		*(.arch.info.init)
-+		KEEP(*(.arch.info.init))
- 		__arch_info_end = .;
- 	}
- 	.init.tagtable : {
- 		__tagtable_begin = .;
--		*(.taglist.init)
-+		KEEP(*(.taglist.init))
- 		__tagtable_end = .;
- 	}
- #ifdef CONFIG_SMP_ON_UP
- 	.init.smpalt : {
- 		__smpalt_begin = .;
--		*(.alt.smp.init)
-+		KEEP(*(.alt.smp.init))
- 		__smpalt_end = .;
- 	}
- #endif
- 	.init.pv_table : {
- 		__pv_table_begin = .;
--		*(.pv_table)
-+		KEEP(*(.pv_table))
- 		__pv_table_end = .;
- 	}
- 
---- a/arch/arm/kernel/vmlinux.lds.h
-+++ b/arch/arm/kernel/vmlinux.lds.h
-@@ -22,13 +22,13 @@
- #define ARM_MMU_DISCARD(x)
- #else
- #define ARM_MMU_KEEP(x)
--#define ARM_MMU_DISCARD(x)	x
-+#define ARM_MMU_DISCARD(x)	KEEP(x)
- #endif
- 
- #define PROC_INFO							\
- 		. = ALIGN(4);						\
- 		__proc_info_begin = .;					\
--		*(.proc.info.init)					\
-+		KEEP(*(.proc.info.init))				\
- 		__proc_info_end = .;
- 
- #define HYPERVISOR_TEXT							\
-@@ -39,11 +39,11 @@
- #define IDMAP_TEXT							\
- 		ALIGN_FUNCTION();					\
- 		__idmap_text_start = .;					\
--		*(.idmap.text)						\
-+		KEEP(*(.idmap.text))					\
- 		__idmap_text_end = .;					\
- 		. = ALIGN(PAGE_SIZE);					\
- 		__hyp_idmap_text_start = .;				\
--		*(.hyp.idmap.text)					\
-+		KEEP(*(.hyp.idmap.text))				\
- 		__hyp_idmap_text_end = .;
- 
- #define ARM_DISCARD							\
-@@ -86,12 +86,12 @@
- 	. = ALIGN(8);							\
- 	.ARM.unwind_idx : {						\
- 		__start_unwind_idx = .;					\
--		*(.ARM.exidx*)						\
-+		KEEP(*(.ARM.exidx*))					\
- 		__stop_unwind_idx = .;					\
- 	}								\
- 	.ARM.unwind_tab : {						\
- 		__start_unwind_tab = .;					\
--		*(.ARM.extab*)						\
-+		KEEP(*(.ARM.extab*))					\
- 		__stop_unwind_tab = .;					\
- 	}
- 
-@@ -102,14 +102,14 @@
- #define ARM_VECTORS							\
- 	__vectors_start = .;						\
- 	.vectors 0xffff0000 : AT(__vectors_start) {			\
--		*(.vectors)						\
-+		KEEP(*(.vectors))					\
- 	}								\
- 	. = __vectors_start + SIZEOF(.vectors);				\
- 	__vectors_end = .;						\
- 									\
- 	__stubs_start = .;						\
- 	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
--		*(.stubs)						\
-+		KEEP(*(.stubs))						\
- 	}								\
- 	. = __stubs_start + SIZEOF(.stubs);				\
- 	__stubs_end = .;						\
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -43,6 +43,7 @@ config MIPS
- 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
- 	select HAVE_CBPF_JIT if (!64BIT && !CPU_MICROMIPS)
- 	select HAVE_EBPF_JIT if (64BIT && !CPU_MICROMIPS)
-+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- 	select HAVE_CONTEXT_TRACKING
- 	select HAVE_COPY_THREAD_TLS
- 	select HAVE_C_RECORDMCOUNT
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -72,7 +72,7 @@ SECTIONS
- 	/* Exception table for data bus errors */
- 	__dbe_table : {
- 		__start___dbe_table = .;
--		*(__dbe_table)
-+		KEEP(*(__dbe_table))
- 		__stop___dbe_table = .;
- 	}
- 
-@@ -123,7 +123,7 @@ SECTIONS
- 	. = ALIGN(4);
- 	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
- 		__mips_machines_start = .;
--		*(.mips.machines.init)
-+		KEEP(*(.mips.machines.init))
- 		__mips_machines_end = .;
- 	}
- 
diff --git a/target/linux/generic/hack-4.19/221-module_exports.patch b/target/linux/generic/hack-4.19/221-module_exports.patch
deleted file mode 100644
index cd5ae5830c..0000000000
--- a/target/linux/generic/hack-4.19/221-module_exports.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From b14784e7883390c20ed3ff904892255404a5914b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:05:53 +0200
-Subject: add an optional config option for stripping all unnecessary symbol exports from the kernel image
-
-lede-commit: bb5a40c64b7c4f4848509fa0a6625055fc9e66cc
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/asm-generic/vmlinux.lds.h | 18 +++++++++++++++---
- include/linux/export.h            |  9 ++++++++-
- scripts/Makefile.build            |  2 +-
- 3 files changed, 24 insertions(+), 5 deletions(-)
-
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -54,6 +54,16 @@
- #define LOAD_OFFSET 0
- #endif
- 
-+#ifndef SYMTAB_KEEP
-+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
-+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
-+#endif
-+
-+#ifndef SYMTAB_DISCARD
-+#define SYMTAB_DISCARD
-+#define SYMTAB_DISCARD_GPL
-+#endif
-+
- /* Align . to a 8 byte boundary equals to maximum function alignment. */
- #define ALIGN_FUNCTION()  . = ALIGN(8)
- 
-@@ -372,14 +382,14 @@
- 	/* Kernel symbol table: Normal symbols */			\
- 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
- 		__start___ksymtab = .;					\
--		KEEP(*(SORT(___ksymtab+*)))				\
-+		SYMTAB_KEEP						\
- 		__stop___ksymtab = .;					\
- 	}								\
- 									\
- 	/* Kernel symbol table: GPL-only symbols */			\
- 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
- 		__start___ksymtab_gpl = .;				\
--		KEEP(*(SORT(___ksymtab_gpl+*)))				\
-+		SYMTAB_KEEP_GPL						\
- 		__stop___ksymtab_gpl = .;				\
- 	}								\
- 									\
-@@ -441,7 +451,7 @@
- 									\
- 	/* Kernel symbol table: strings */				\
-         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
--		*(__ksymtab_strings)					\
-+		*(__ksymtab_strings+*)					\
- 	}								\
- 									\
- 	/* __*init sections */						\
-@@ -841,6 +851,8 @@
- 	EXIT_TEXT							\
- 	EXIT_DATA							\
- 	EXIT_CALL							\
-+	SYMTAB_DISCARD							\
-+	SYMTAB_DISCARD_GPL						\
- 	*(.discard)							\
- 	*(.discard.*)							\
- 	}
---- a/include/linux/export.h
-+++ b/include/linux/export.h
-@@ -74,12 +74,19 @@ struct kernel_symbol {
- };
- #endif
- 
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(sym)
-+#else
-+#define __EXPORT_SUFFIX(sym) "+" #sym
-+#endif
-+
- /* For every exported symbol, place a struct in the __ksymtab section */
- #define ___EXPORT_SYMBOL(sym, sec)					\
- 	extern typeof(sym) sym;						\
- 	__CRC_SYMBOL(sym, sec)						\
- 	static const char __kstrtab_##sym[]				\
--	__attribute__((section("__ksymtab_strings"), used, aligned(1)))	\
-+	__attribute__((section("__ksymtab_strings"			\
-+	  __EXPORT_SUFFIX(sym)), used, aligned(1)))			\
- 	= #sym;								\
- 	__KSYMTAB_ENTRY(sym, sec)
- 
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -408,7 +408,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $(
- # Linker scripts preprocessor (.lds.S -> .lds)
- # ---------------------------------------------------------------------------
- quiet_cmd_cpp_lds_S = LDS     $@
--      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
-+      cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -U$(ARCH) \
- 	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
- 
- $(obj)/%.lds: $(src)/%.lds.S FORCE
diff --git a/target/linux/generic/hack-4.19/230-openwrt_lzma_options.patch b/target/linux/generic/hack-4.19/230-openwrt_lzma_options.patch
deleted file mode 100644
index b45ed1184f..0000000000
--- a/target/linux/generic/hack-4.19/230-openwrt_lzma_options.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From b3d00b452467f621317953d9e4c6f9ae8dcfd271 Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:06:55 +0200
-Subject: use the openwrt lzma options for now
-
-lede-commit: 548de949f392049420a6a1feeef118b30ab8ea8c
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- lib/decompress.c              |  1 +
- scripts/Makefile.lib          |  2 +-
- usr/gen_initramfs_list.sh | 10 +++++-----
- 3 files changed, 7 insertions(+), 6 deletions(-)
-
---- a/lib/decompress.c
-+++ b/lib/decompress.c
-@@ -49,6 +49,7 @@ static const struct compress_format comp
- 	{ {0x1f, 0x9e}, "gzip", gunzip },
- 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
- 	{ {0x5d, 0x00}, "lzma", unlzma },
-+	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
- 	{ {0xfd, 0x37}, "xz", unxz },
- 	{ {0x89, 0x4c}, "lzo", unlzo },
- 	{ {0x02, 0x21}, "lz4", unlz4 },
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -324,7 +324,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
- 
- quiet_cmd_lzma = LZMA    $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
--	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- 	(rm -f $@ ; false)
- 
- quiet_cmd_lzo = LZO     $@
---- a/usr/gen_initramfs_list.sh
-+++ b/usr/gen_initramfs_list.sh
-@@ -229,7 +229,7 @@ cpio_list=
- output="/dev/stdout"
- output_file=""
- is_cpio_compressed=
--compr="gzip -n -9 -f"
-+compr="gzip -n -9 -f -"
- 
- arg="$1"
- case "$arg" in
-@@ -245,13 +245,13 @@ case "$arg" in
- 		output=${cpio_list}
- 		echo "$output_file" | grep -q "\.gz$" \
-                 && [ -x "`which gzip 2> /dev/null`" ] \
--                && compr="gzip -n -9 -f"
-+                && compr="gzip -n -9 -f -"
- 		echo "$output_file" | grep -q "\.bz2$" \
-                 && [ -x "`which bzip2 2> /dev/null`" ] \
--                && compr="bzip2 -9 -f"
-+                && compr="bzip2 -9 -f -"
- 		echo "$output_file" | grep -q "\.lzma$" \
-                 && [ -x "`which lzma 2> /dev/null`" ] \
--                && compr="lzma -9 -f"
-+                && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
- 		echo "$output_file" | grep -q "\.xz$" \
-                 && [ -x "`which xz 2> /dev/null`" ] \
-                 && compr="xz --check=crc32 --lzma2=dict=1MiB"
-@@ -320,7 +320,7 @@ if [ ! -z ${output_file} ]; then
- 	if [ "${is_cpio_compressed}" = "compressed" ]; then
- 		cat ${cpio_tfile} > ${output_file}
- 	else
--		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
-+		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
- 		|| (rm -f ${output_file} ; false)
- 	fi
- 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
diff --git a/target/linux/generic/hack-4.19/250-netfilter_depends.patch b/target/linux/generic/hack-4.19/250-netfilter_depends.patch
deleted file mode 100644
index cb744bd8ab..0000000000
--- a/target/linux/generic/hack-4.19/250-netfilter_depends.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: hack: net: remove bogus netfilter dependencies
-
-lede-commit: 589d2a377dee27d206fc3725325309cf649e4df6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/Kconfig | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -241,7 +241,6 @@ config NF_CONNTRACK_FTP
- 
- config NF_CONNTRACK_H323
- 	tristate "H.323 protocol support"
--	depends on IPV6 || IPV6=n
- 	depends on NETFILTER_ADVANCED
- 	help
- 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -1077,7 +1076,6 @@ config NETFILTER_XT_TARGET_SECMARK
- 
- config NETFILTER_XT_TARGET_TCPMSS
- 	tristate '"TCPMSS" target support'
--	depends on IPV6 || IPV6=n
- 	default m if NETFILTER_ADVANCED=n
- 	---help---
- 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/hack-4.19/251-sound_kconfig.patch b/target/linux/generic/hack-4.19/251-sound_kconfig.patch
deleted file mode 100644
index 2cfc2fab3a..0000000000
--- a/target/linux/generic/hack-4.19/251-sound_kconfig.patch
+++ /dev/null
@@ -1,197 +0,0 @@
-From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:09:21 +0200
-Subject: kconfig: owrt specifc dependencies
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- crypto/Kconfig        | 10 +++++-----
- drivers/bcma/Kconfig  |  1 +
- drivers/ssb/Kconfig   |  3 ++-
- lib/Kconfig           |  8 ++++----
- net/netfilter/Kconfig |  2 +-
- net/wireless/Kconfig  | 17 ++++++++++-------
- sound/core/Kconfig    |  4 ++--
- 7 files changed, 25 insertions(+), 20 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -33,7 +33,7 @@ config CRYPTO_FIPS
- 	  this is.
- 
- config CRYPTO_ALGAPI
--	tristate
-+	tristate "ALGAPI"
- 	select CRYPTO_ALGAPI2
- 	help
- 	  This option provides the API for cryptographic algorithms.
-@@ -42,7 +42,7 @@ config CRYPTO_ALGAPI2
- 	tristate
- 
- config CRYPTO_AEAD
--	tristate
-+	tristate "AEAD"
- 	select CRYPTO_AEAD2
- 	select CRYPTO_ALGAPI
- 
-@@ -53,7 +53,7 @@ config CRYPTO_AEAD2
- 	select CRYPTO_RNG2
- 
- config CRYPTO_BLKCIPHER
--	tristate
-+	tristate "BLKCIPHER"
- 	select CRYPTO_BLKCIPHER2
- 	select CRYPTO_ALGAPI
- 
-@@ -64,7 +64,7 @@ config CRYPTO_BLKCIPHER2
- 	select CRYPTO_WORKQUEUE
- 
- config CRYPTO_HASH
--	tristate
-+	tristate "HASH"
- 	select CRYPTO_HASH2
- 	select CRYPTO_ALGAPI
- 
-@@ -73,7 +73,7 @@ config CRYPTO_HASH2
- 	select CRYPTO_ALGAPI2
- 
- config CRYPTO_RNG
--	tristate
-+	tristate "RNG"
- 	select CRYPTO_RNG2
- 	select CRYPTO_ALGAPI
- 
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -16,6 +16,7 @@ if BCMA
- # Support for Block-I/O. SELECT this from the driver that needs it.
- config BCMA_BLOCKIO
- 	bool
-+	default y
- 
- config BCMA_HOST_PCI_POSSIBLE
- 	bool
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -28,6 +28,7 @@ config SSB_SPROM
- config SSB_BLOCKIO
- 	bool
- 	depends on SSB
-+	default y
- 
- config SSB_PCIHOST_POSSIBLE
- 	bool
-@@ -48,7 +49,7 @@ config SSB_PCIHOST
- config SSB_B43_PCI_BRIDGE
- 	bool
- 	depends on SSB_PCIHOST
--	default n
-+	default y
- 
- config SSB_PCMCIAHOST_POSSIBLE
- 	bool
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -377,16 +377,16 @@ config BCH_CONST_T
- # Textsearch support is select'ed if needed
- #
- config TEXTSEARCH
--	bool
-+	bool "Textsearch support"
- 
- config TEXTSEARCH_KMP
--	tristate
-+	tristate "Textsearch KMP"
- 
- config TEXTSEARCH_BM
--	tristate
-+	tristate "Textsearch BM"
- 
- config TEXTSEARCH_FSM
--	tristate
-+	tristate "Textsearch FSM"
- 
- config BTREE
- 	bool
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -10,7 +10,7 @@ config NETFILTER_INGRESS
- 	  infrastructure.
- 
- config NETFILTER_NETLINK
--	tristate
-+	tristate "Netfilter NFNETLINK interface"
- 
- config NETFILTER_FAMILY_BRIDGE
- 	bool
---- a/net/wireless/Kconfig
-+++ b/net/wireless/Kconfig
-@@ -1,5 +1,5 @@
- config WIRELESS_EXT
--	bool
-+	bool "Wireless extensions"
- 
- config WEXT_CORE
- 	def_bool y
-@@ -11,10 +11,10 @@ config WEXT_PROC
- 	depends on WEXT_CORE
- 
- config WEXT_SPY
--	bool
-+	bool "WEXT_SPY"
- 
- config WEXT_PRIV
--	bool
-+	bool "WEXT_PRIV"
- 
- config CFG80211
- 	tristate "cfg80211 - wireless configuration API"
-@@ -202,7 +202,7 @@ config CFG80211_WEXT_EXPORT
- endif # CFG80211
- 
- config LIB80211
--	tristate
-+	tristate "LIB80211"
- 	default n
- 	help
- 	  This options enables a library of common routines used
-@@ -211,13 +211,16 @@ config LIB80211
- 	  Drivers should select this themselves if needed.
- 
- config LIB80211_CRYPT_WEP
--	tristate
-+	tristate "LIB80211_CRYPT_WEP"
-+	select LIB80211
- 
- config LIB80211_CRYPT_CCMP
--	tristate
-+	tristate "LIB80211_CRYPT_CCMP"
-+	select LIB80211
- 
- config LIB80211_CRYPT_TKIP
--	tristate
-+	tristate "LIB80211_CRYPT_TKIP"
-+	select LIB80211
- 
- config LIB80211_DEBUG
- 	bool "lib80211 debugging messages"
---- a/sound/core/Kconfig
-+++ b/sound/core/Kconfig
-@@ -16,7 +16,7 @@ config SND_DMAENGINE_PCM
- 	tristate
- 
- config SND_HWDEP
--	tristate
-+	tristate "Sound hardware support"
- 
- config SND_SEQ_DEVICE
- 	tristate
-@@ -26,7 +26,7 @@ config SND_RAWMIDI
- 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
- 
- config SND_COMPRESS_OFFLOAD
--	tristate
-+	tristate "Compression offloading support"
- 
- config SND_JACK
- 	bool
diff --git a/target/linux/generic/hack-4.19/259-regmap_dynamic.patch b/target/linux/generic/hack-4.19/259-regmap_dynamic.patch
deleted file mode 100644
index 335ec4afc5..0000000000
--- a/target/linux/generic/hack-4.19/259-regmap_dynamic.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 811d9e2268a62b830cfe93cd8bc929afcb8b198b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:12:38 +0200
-Subject: kernel: move regmap bloat out of the kernel image if it is only being used in modules
-
-lede-commit: 96f39119815028073583e4fca3a9c5fe9141e998
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/regmap/Kconfig  | 15 ++++++++++-----
- drivers/base/regmap/Makefile | 12 ++++++++----
- drivers/base/regmap/regmap.c |  3 +++
- include/linux/regmap.h       |  2 +-
- 4 files changed, 22 insertions(+), 10 deletions(-)
-
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -4,9 +4,8 @@
- # subsystems should select the appropriate symbols.
- 
- config REGMAP
--	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
- 	select IRQ_DOMAIN if REGMAP_IRQ
--	bool
-+	tristate
- 
- config REGCACHE_COMPRESSED
- 	select LZO_COMPRESS
-@@ -18,6 +17,7 @@ config REGMAP_AC97
- 
- config REGMAP_I2C
- 	tristate
-+	select REGMAP
- 	depends on I2C
- 
- config REGMAP_SLIMBUS
-@@ -26,20 +26,26 @@ config REGMAP_SLIMBUS
- 
- config REGMAP_SPI
- 	tristate
-+	select REGMAP
-+	depends on SPI_MASTER
- 	depends on SPI
- 
- config REGMAP_SPMI
-+	select REGMAP
- 	tristate
- 	depends on SPMI
- 
- config REGMAP_W1
-+	select REGMAP
- 	tristate
- 	depends on W1
- 
- config REGMAP_MMIO
- 	tristate
-+	select REGMAP
- 
- config REGMAP_IRQ
-+	select REGMAP
- 	bool
- 
- config REGMAP_SOUNDWIRE
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -2,10 +2,14 @@
- # For include/trace/define_trace.h to include trace.h
- CFLAGS_regmap.o := -I$(src)
- 
--obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
--obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
--obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
-+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o
-+ifdef CONFIG_DEBUG_FS
-+regmap-core-objs += regmap-debugfs.o
-+endif
-+ifdef CONFIG_REGCACHE_COMPRESSED
-+regmap-core-objs += regcache-lzo.o
-+endif
-+obj-$(CONFIG_REGMAP) += regmap-core.o
- obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
- obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o
---- a/drivers/base/regmap/regmap.c
-+++ b/drivers/base/regmap/regmap.c
-@@ -13,6 +13,7 @@
- #include <linux/device.h>
- #include <linux/slab.h>
- #include <linux/export.h>
-+#include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/of.h>
-@@ -3037,3 +3038,5 @@ static int __init regmap_initcall(void)
- 	return 0;
- }
- postcore_initcall(regmap_initcall);
-+
-+MODULE_LICENSE("GPL");
---- a/include/linux/regmap.h
-+++ b/include/linux/regmap.h
-@@ -187,7 +187,7 @@ struct reg_sequence {
- 	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
- })
- 
--#ifdef CONFIG_REGMAP
-+#if IS_REACHABLE(CONFIG_REGMAP)
- 
- enum regmap_endian {
- 	/* Unspecified -> 0 -> Backwards compatible default */
diff --git a/target/linux/generic/hack-4.19/260-crypto_test_dependencies.patch b/target/linux/generic/hack-4.19/260-crypto_test_dependencies.patch
deleted file mode 100644
index f11f45437f..0000000000
--- a/target/linux/generic/hack-4.19/260-crypto_test_dependencies.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From fd1799b0bf5efa46dd3e6dfbbf3955564807e508 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:12:51 +0200
-Subject: kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
-
-Reduces kernel size after LZMA by about 5k on MIPS
-
-lede-commit: 044c316167e076479a344c59905e5b435b84a77f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- crypto/Kconfig   | 13 ++++++-------
- crypto/algboss.c |  4 ++++
- 2 files changed, 10 insertions(+), 7 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -144,13 +144,13 @@ config CRYPTO_MANAGER
- 	  cbc(aes).
- 
- config CRYPTO_MANAGER2
--	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
--	select CRYPTO_AEAD2
--	select CRYPTO_HASH2
--	select CRYPTO_BLKCIPHER2
--	select CRYPTO_AKCIPHER2
--	select CRYPTO_KPP2
--	select CRYPTO_ACOMP2
-+	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS)
-+	select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_BLKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_KPP2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_ACOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS
- 
- config CRYPTO_USER
- 	tristate "Userspace cryptographic algorithm configuration"
-@@ -163,7 +163,6 @@ config CRYPTO_USER
- config CRYPTO_MANAGER_DISABLE_TESTS
- 	bool "Disable run-time self tests"
- 	default y
--	depends on CRYPTO_MANAGER2
- 	help
- 	  Disable run-time self tests that normally take place at
- 	  algorithm registration.
---- a/crypto/algboss.c
-+++ b/crypto/algboss.c
-@@ -247,8 +247,12 @@ static int cryptomgr_schedule_test(struc
- 	type = alg->cra_flags;
- 
- 	/* Do not test internal algorithms. */
-+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
-+	type |= CRYPTO_ALG_TESTED;
-+#else
- 	if (type & CRYPTO_ALG_INTERNAL)
- 		type |= CRYPTO_ALG_TESTED;
-+#endif
- 
- 	param->type = type;
- 
diff --git a/target/linux/generic/hack-4.19/280-rfkill-stubs.patch b/target/linux/generic/hack-4.19/280-rfkill-stubs.patch
deleted file mode 100644
index 7bb7d26b90..0000000000
--- a/target/linux/generic/hack-4.19/280-rfkill-stubs.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 236c1acdfef5958010ac9814a9872e0a46fd78ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:13:44 +0200
-Subject: rfkill: add fake rfkill support
-
-allow building of modules depending on RFKILL even if RFKILL is not enabled.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- include/linux/rfkill.h |  2 +-
- net/Makefile           |  2 +-
- net/rfkill/Kconfig     | 14 +++++++++-----
- net/rfkill/Makefile    |  2 +-
- 4 files changed, 12 insertions(+), 8 deletions(-)
-
---- a/include/linux/rfkill.h
-+++ b/include/linux/rfkill.h
-@@ -64,7 +64,7 @@ struct rfkill_ops {
- 	int	(*set_block)(void *data, bool blocked);
- };
- 
--#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-+#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE)
- /**
-  * rfkill_alloc - Allocate rfkill structure
-  * @name: name of the struct -- the string is not copied internally
---- a/net/Makefile
-+++ b/net/Makefile
-@@ -53,7 +53,7 @@ obj-$(CONFIG_TIPC)		+= tipc/
- obj-$(CONFIG_NETLABEL)		+= netlabel/
- obj-$(CONFIG_IUCV)		+= iucv/
- obj-$(CONFIG_SMC)		+= smc/
--obj-$(CONFIG_RFKILL)		+= rfkill/
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill/
- obj-$(CONFIG_NET_9P)		+= 9p/
- obj-$(CONFIG_CAIF)		+= caif/
- ifneq ($(CONFIG_DCB),)
---- a/net/rfkill/Kconfig
-+++ b/net/rfkill/Kconfig
-@@ -1,7 +1,11 @@
- #
- # RF switch subsystem configuration
- #
--menuconfig RFKILL
-+config RFKILL
-+	bool
-+	default y
-+
-+menuconfig RFKILL_FULL
- 	tristate "RF switch subsystem support"
- 	help
- 	  Say Y here if you want to have control over RF switches
-@@ -13,19 +17,19 @@ menuconfig RFKILL
- # LED trigger support
- config RFKILL_LEDS
- 	bool
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
- 	default y
- 
- config RFKILL_INPUT
- 	bool "RF switch input support" if EXPERT
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on INPUT = y || RFKILL = INPUT
- 	default y if !EXPERT
- 
- config RFKILL_GPIO
- 	tristate "GPIO RFKILL driver"
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on GPIOLIB || COMPILE_TEST
- 	default n
- 	help
---- a/net/rfkill/Makefile
-+++ b/net/rfkill/Makefile
-@@ -4,5 +4,5 @@
- 
- rfkill-y			+= core.o
- rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
--obj-$(CONFIG_RFKILL)		+= rfkill.o
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill.o
- obj-$(CONFIG_RFKILL_GPIO)	+= rfkill-gpio.o
diff --git a/target/linux/generic/hack-4.19/290-nvmem-make-CONFIG_NVMEM-tristate-again.patch b/target/linux/generic/hack-4.19/290-nvmem-make-CONFIG_NVMEM-tristate-again.patch
deleted file mode 100644
index ad45dc9168..0000000000
--- a/target/linux/generic/hack-4.19/290-nvmem-make-CONFIG_NVMEM-tristate-again.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 2579d9b982c7232f9354bcca5262e26a84c38799 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 2 Nov 2018 17:40:32 +0100
-Subject: [PATCH] nvmem: make CONFIG_NVMEM tristate again
-
-Only build it in when OF_NET is selected and make it possible to build
-it as module otherwise.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/nvmem/Kconfig | 2 +-
- drivers/of/Kconfig    | 1 +
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -1,5 +1,5 @@
- menuconfig NVMEM
--	bool "NVMEM Support"
-+	tristate "NVMEM Support"
- 	help
- 	  Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
- 
---- a/drivers/of/Kconfig
-+++ b/drivers/of/Kconfig
-@@ -71,6 +71,7 @@ config OF_IRQ
- 
- config OF_NET
- 	depends on NETDEVICES
-+	select NVMEM
- 	def_bool y
- 
- config OF_MDIO
diff --git a/target/linux/generic/hack-4.19/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch b/target/linux/generic/hack-4.19/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
deleted file mode 100644
index c07ccf9474..0000000000
--- a/target/linux/generic/hack-4.19/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Date: Fri, 7 Jun 2013 18:35:22 -0500
-Subject: MIPS: r4k_cache: use more efficient cache blast
-
-Optimize the compiler output for larger cache blast cases that are
-common for DMA-based networking.
-
-Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -683,16 +683,48 @@ static inline void prot##extra##blast_##
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
-+	unsigned long lsize_2 = lsize * 2;				\
-+	unsigned long lsize_3 = lsize * 3;				\
-+	unsigned long lsize_4 = lsize * 4;				\
-+	unsigned long lsize_5 = lsize * 5;				\
-+	unsigned long lsize_6 = lsize * 6;				\
-+	unsigned long lsize_7 = lsize * 7;				\
-+	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
--	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
-+	int lines = (aend - addr) / lsize;				\
- 									\
- 	__##pfx##flush_prologue						\
- 									\
--	while (1) {							\
-+	while (lines >= 8) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		prot##cache_op(hitop, addr + lsize_4);			\
-+		prot##cache_op(hitop, addr + lsize_5);			\
-+		prot##cache_op(hitop, addr + lsize_6);			\
-+		prot##cache_op(hitop, addr + lsize_7);			\
-+		addr += lsize_8;					\
-+		lines -= 8;						\
-+	}								\
-+									\
-+	if (lines & 0x4) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		addr += lsize_4;					\
-+	}								\
-+									\
-+	if (lines & 0x2) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		addr += lsize_2;					\
-+	}								\
-+									\
-+	if (lines & 0x1) {						\
- 		prot##cache_op(hitop, addr);				\
--		if (addr == aend)					\
--			break;						\
--		addr += lsize;						\
- 	}								\
- 									\
- 	__##pfx##flush_epilogue						\
diff --git a/target/linux/generic/hack-4.19/301-mips_image_cmdline_hack.patch b/target/linux/generic/hack-4.19/301-mips_image_cmdline_hack.patch
deleted file mode 100644
index 7a6948d481..0000000000
--- a/target/linux/generic/hack-4.19/301-mips_image_cmdline_hack.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: hack: kernel: add generic image_cmdline hack to MIPS targets
-
-lede-commit: d59f5b3a987a48508257a0ddbaeadc7909f9f976
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/Kconfig       | 4 ++++
- arch/mips/kernel/head.S | 6 ++++++
- 2 files changed, 10 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1143,6 +1143,10 @@ config SYNC_R4K
- config MIPS_MACHINE
- 	def_bool n
- 
-+config IMAGE_CMDLINE_HACK
-+	bool "OpenWrt specific image command line hack"
-+	default n
-+
- config NO_IOPORT_MAP
- 	def_bool n
- 
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -79,6 +79,12 @@ FEXPORT(__kernel_entry)
- 	j	kernel_entry
- #endif
- 
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+	.ascii	"CMDLINE:"
-+EXPORT(__image_cmdline)
-+	.fill	0x400
-+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-+
- 	__REF
- 
- NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/hack-4.19/321-powerpc_crtsavres_prereq.patch b/target/linux/generic/hack-4.19/321-powerpc_crtsavres_prereq.patch
deleted file mode 100644
index 26c385f011..0000000000
--- a/target/linux/generic/hack-4.19/321-powerpc_crtsavres_prereq.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 107c0964cb8db7ca28ac5199426414fdab3c274d Mon Sep 17 00:00:00 2001
-From: "Alexandros C. Couloumbis" <alex@ozo.com>
-Date: Fri, 7 Jul 2017 17:14:51 +0200
-Subject: hack: arch: powerpc: drop register save/restore library from modules
-
-Upstream GCC uses a libgcc function for saving/restoring registers. This
-makes the code bigger, and upstream kernels need to carry that function
-for every single kernel module. Our GCC is patched to avoid those
-references, so we can drop the extra bloat for modules.
-
-lede-commit: e8e1084654f50904e6bf77b70b2de3f137d7b3ec
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- arch/powerpc/Makefile | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -60,20 +60,6 @@ machine-$(CONFIG_PPC64) += 64
- machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
- UTS_MACHINE := $(subst $(space),,$(machine-y))
- 
--# XXX This needs to be before we override LD below
--ifdef CONFIG_PPC32
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
--else
--KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/powerpc/kernel/module.lds
--ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
--# Have the linker provide sfpr if possible.
--# There is a corresponding test in arch/powerpc/lib/Makefile
--KBUILD_LDFLAGS_MODULE += --save-restore-funcs
--else
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
--endif
--endif
--
- ifdef CONFIG_CPU_LITTLE_ENDIAN
- KBUILD_CFLAGS	+= -mlittle-endian
- KBUILD_LDFLAGS	+= -EL
diff --git a/target/linux/generic/hack-4.19/531-debloat_lzma.patch b/target/linux/generic/hack-4.19/531-debloat_lzma.patch
deleted file mode 100644
index 2e453cc2f2..0000000000
--- a/target/linux/generic/hack-4.19/531-debloat_lzma.patch
+++ /dev/null
@@ -1,1040 +0,0 @@
-From 3fd297761ac246c54d7723c57fca95c112b99465 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:15:44 +0200
-Subject: lzma: de-bloat the lzma library used by jffs2
-
-lede-commit: 3fd1dd08fbcbb78b34efefd32c3032e5c99108d6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/lzma/LzFind.h  |  17 ---
- include/linux/lzma/LzmaDec.h | 101 ---------------
- include/linux/lzma/LzmaEnc.h |  20 ---
- lib/lzma/LzFind.c            | 287 ++++---------------------------------------
- lib/lzma/LzmaDec.c           |  86 +------------
- lib/lzma/LzmaEnc.c           | 172 ++------------------------
- 6 files changed, 42 insertions(+), 641 deletions(-)
-
---- a/include/linux/lzma/LzFind.h
-+++ b/include/linux/lzma/LzFind.h
-@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
- 
- #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
- 
--int MatchFinder_NeedMove(CMatchFinder *p);
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
--void MatchFinder_MoveBlock(CMatchFinder *p);
--void MatchFinder_ReadIfRequired(CMatchFinder *p);
--
- void MatchFinder_Construct(CMatchFinder *p);
- 
- /* Conditions:
-@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
-     UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-     ISzAlloc *alloc);
- void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
--    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
--    UInt32 *distances, UInt32 maxLen);
- 
- /*
- Conditions:
-@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
- 
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
- 
--void MatchFinder_Init(CMatchFinder *p);
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--
- #ifdef __cplusplus
- }
- #endif
---- a/include/linux/lzma/LzmaDec.h
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
-   UInt32 dicSize;
- } CLzmaProps;
- 
--/* LzmaProps_Decode - decodes properties
--Returns:
--  SZ_OK
--  SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
--
- 
- /* ---------- LZMA Decoder state ---------- */
- 
-@@ -70,8 +62,6 @@ typedef struct
- 
- #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
- 
--void LzmaDec_Init(CLzmaDec *p);
--
- /* There are two types of LZMA streams:
-      0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-      1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-@@ -108,97 +98,6 @@ typedef enum
- 
- /* ELzmaStatus is used only as output value for function call */
- 
--
--/* ---------- Interfaces ---------- */
--
--/* There are 3 levels of interfaces:
--     1) Dictionary Interface
--     2) Buffer Interface
--     3) One Call Interface
--   You can select any of these interfaces, but don't mix functions from different
--   groups for same object. */
--
--
--/* There are two variants to allocate state for Dictionary Interface:
--     1) LzmaDec_Allocate / LzmaDec_Free
--     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
--   You can use variant 2, if you set dictionary buffer manually.
--   For Buffer Interface you must always use variant 1.
--
--LzmaDec_Allocate* can return:
--  SZ_OK
--  SZ_ERROR_MEM         - Memory allocation error
--  SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--   
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
--
--SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
--
--/* ---------- Dictionary Interface ---------- */
--
--/* You can use it, if you want to eliminate the overhead for data copying from
--   dictionary to some other external buffer.
--   You must work with CLzmaDec variables directly in this interface.
--
--   STEPS:
--     LzmaDec_Constr()
--     LzmaDec_Allocate()
--     for (each new stream)
--     {
--       LzmaDec_Init()
--       while (it needs more decompression)
--       {
--         LzmaDec_DecodeToDic()
--         use data from CLzmaDec::dic and update CLzmaDec::dicPos
--       }
--     }
--     LzmaDec_Free()
--*/
--
--/* LzmaDec_DecodeToDic
--   
--   The decoding to internal dictionary buffer (CLzmaDec::dic).
--   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
--
--finishMode:
--  It has meaning only if the decoding reaches output limit (dicLimit).
--  LZMA_FINISH_ANY - Decode just dicLimit bytes.
--  LZMA_FINISH_END - Stream must be finished after dicLimit.
--
--Returns:
--  SZ_OK
--    status:
--      LZMA_STATUS_FINISHED_WITH_MARK
--      LZMA_STATUS_NOT_FINISHED
--      LZMA_STATUS_NEEDS_MORE_INPUT
--      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
--  SZ_ERROR_DATA - Data error
--*/
--
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
--    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
--/* ---------- Buffer Interface ---------- */
--
--/* It's zlib-like interface.
--   See LzmaDec_DecodeToDic description for information about STEPS and return results,
--   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
--   to work with CLzmaDec variables manually.
--
--finishMode:
--  It has meaning only if the decoding reaches output limit (*destLen).
--  LZMA_FINISH_ANY - Decode just destLen bytes.
--  LZMA_FINISH_END - Stream must be finished after (*destLen).
--*/
--
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
--    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
- /* ---------- One Call Interface ---------- */
- 
- /* LzmaDecode
---- a/include/linux/lzma/LzmaEnc.h
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
- } CLzmaEncProps;
- 
- void LzmaEncProps_Init(CLzmaEncProps *p);
--void LzmaEncProps_Normalize(CLzmaEncProps *p);
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
--
- 
- /* ---------- CLzmaEncHandle Interface ---------- */
- 
-@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
- void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
--SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-     int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
- 
--/* ---------- One Call Interface ---------- */
--
--/* LzmaEncode
--Return code:
--  SZ_OK               - OK
--  SZ_ERROR_MEM        - Memory allocation error
--  SZ_ERROR_PARAM      - Incorrect paramater
--  SZ_ERROR_OUTPUT_EOF - output buffer overflow
--  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
--*/
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
--    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
--
- #ifdef __cplusplus
- }
- #endif
---- a/lib/lzma/LzFind.c
-+++ b/lib/lzma/LzFind.c
-@@ -14,9 +14,15 @@
- 
- #define kStartMaxLen 3
- 
-+#if 0
-+#define DIRECT_INPUT	p->directInput
-+#else
-+#define DIRECT_INPUT	1
-+#endif
-+
- static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
- {
--  if (!p->directInput)
-+  if (!DIRECT_INPUT)
-   {
-     alloc->Free(alloc, p->bufferBase);
-     p->bufferBase = 0;
-@@ -28,7 +34,7 @@ static void LzInWindow_Free(CMatchFinder
- static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
- {
-   UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-   {
-     p->blockSize = blockSize;
-     return 1;
-@@ -42,12 +48,12 @@ static int LzInWindow_Create(CMatchFinde
-   return (p->bufferBase != 0);
- }
- 
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
--Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
- 
--UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
- 
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
- {
-   p->posLimit -= subValue;
-   p->pos -= subValue;
-@@ -58,7 +64,7 @@ static void MatchFinder_ReadBlock(CMatch
- {
-   if (p->streamEndWasReached || p->result != SZ_OK)
-     return;
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-   {
-     UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-     if (curSize > p->directInputRem)
-@@ -89,7 +95,7 @@ static void MatchFinder_ReadBlock(CMatch
-   }
- }
- 
--void MatchFinder_MoveBlock(CMatchFinder *p)
-+static void MatchFinder_MoveBlock(CMatchFinder *p)
- {
-   memmove(p->bufferBase,
-     p->buffer - p->keepSizeBefore,
-@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder
-   p->buffer = p->bufferBase + p->keepSizeBefore;
- }
- 
--int MatchFinder_NeedMove(CMatchFinder *p)
-+static int MatchFinder_NeedMove(CMatchFinder *p)
- {
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-     return 0;
-   /* if (p->streamEndWasReached) return 0; */
-   return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
- }
- 
--void MatchFinder_ReadIfRequired(CMatchFinder *p)
--{
--  if (p->streamEndWasReached)
--    return;
--  if (p->keepSizeAfter >= p->streamPos - p->pos)
--    MatchFinder_ReadBlock(p);
--}
--
- static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
- {
-   if (MatchFinder_NeedMove(p))
-@@ -268,7 +266,7 @@ static void MatchFinder_SetLimits(CMatch
-   p->posLimit = p->pos + limit;
- }
- 
--void MatchFinder_Init(CMatchFinder *p)
-+static void MatchFinder_Init(CMatchFinder *p)
- {
-   UInt32 i;
-   for (i = 0; i < p->hashSizeSum; i++)
-@@ -287,7 +285,7 @@ static UInt32 MatchFinder_GetSubValue(CM
-   return (p->pos - p->historySize - 1) & kNormalizeMask;
- }
- 
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
- {
-   UInt32 i;
-   for (i = 0; i < numItems; i++)
-@@ -319,38 +317,7 @@ static void MatchFinder_CheckLimits(CMat
-   MatchFinder_SetLimits(p);
- }
- 
--static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
--    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
--    UInt32 *distances, UInt32 maxLen)
--{
--  son[_cyclicBufferPos] = curMatch;
--  for (;;)
--  {
--    UInt32 delta = pos - curMatch;
--    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
--      return distances;
--    {
--      const Byte *pb = cur - delta;
--      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
--      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
--      {
--        UInt32 len = 0;
--        while (++len != lenLimit)
--          if (pb[len] != cur[len])
--            break;
--        if (maxLen < len)
--        {
--          *distances++ = maxLen = len;
--          *distances++ = delta - 1;
--          if (len == lenLimit)
--            return distances;
--        }
--      }
--    }
--  }
--}
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-     UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-     UInt32 *distances, UInt32 maxLen)
- {
-@@ -460,10 +427,10 @@ static void SkipMatchesSpec(UInt32 lenLi
-   p->buffer++; \
-   if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
- 
--#define MOVE_POS_RET MOVE_POS return offset;
--
- static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
- 
-+#define MOVE_POS_RET MatchFinder_MovePos(p); return offset;
-+
- #define GET_MATCHES_HEADER2(minLen, ret_op) \
-   UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-   lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-@@ -479,62 +446,7 @@ static void MatchFinder_MovePos(CMatchFi
-   distances + offset, maxLen) - distances); MOVE_POS_RET;
- 
- #define SKIP_FOOTER \
--  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
--
--static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(2)
--  HASH2_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = 0;
--  GET_MATCHES_FOOTER(offset, 1)
--}
--
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(3)
--  HASH_ZIP_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = 0;
--  GET_MATCHES_FOOTER(offset, 2)
--}
--
--static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 hash2Value, delta2, maxLen, offset;
--  GET_MATCHES_HEADER(3)
--
--  HASH3_CALC;
--
--  delta2 = p->pos - p->hash[hash2Value];
--  curMatch = p->hash[kFix3HashSize + hashValue];
--  
--  p->hash[hash2Value] =
--  p->hash[kFix3HashSize + hashValue] = p->pos;
--
--
--  maxLen = 2;
--  offset = 0;
--  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
--  {
--    for (; maxLen != lenLimit; maxLen++)
--      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
--        break;
--    distances[0] = maxLen;
--    distances[1] = delta2 - 1;
--    offset = 2;
--    if (maxLen == lenLimit)
--    {
--      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
--      MOVE_POS_RET;
--    }
--  }
--  GET_MATCHES_FOOTER(offset, maxLen)
--}
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p);
- 
- static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
- {
-@@ -583,108 +495,6 @@ static UInt32 Bt4_MatchFinder_GetMatches
-   GET_MATCHES_FOOTER(offset, maxLen)
- }
- 
--static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
--  GET_MATCHES_HEADER(4)
--
--  HASH4_CALC;
--
--  delta2 = p->pos - p->hash[                hash2Value];
--  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
--  curMatch = p->hash[kFix4HashSize + hashValue];
--
--  p->hash[                hash2Value] =
--  p->hash[kFix3HashSize + hash3Value] =
--  p->hash[kFix4HashSize + hashValue] = p->pos;
--
--  maxLen = 1;
--  offset = 0;
--  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
--  {
--    distances[0] = maxLen = 2;
--    distances[1] = delta2 - 1;
--    offset = 2;
--  }
--  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
--  {
--    maxLen = 3;
--    distances[offset + 1] = delta3 - 1;
--    offset += 2;
--    delta2 = delta3;
--  }
--  if (offset != 0)
--  {
--    for (; maxLen != lenLimit; maxLen++)
--      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
--        break;
--    distances[offset - 2] = maxLen;
--    if (maxLen == lenLimit)
--    {
--      p->son[p->cyclicBufferPos] = curMatch;
--      MOVE_POS_RET;
--    }
--  }
--  if (maxLen < 3)
--    maxLen = 3;
--  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
--    distances + offset, maxLen) - (distances));
--  MOVE_POS_RET
--}
--
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(3)
--  HASH_ZIP_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
--    distances, 2) - (distances));
--  MOVE_POS_RET
--}
--
--static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(2)
--    HASH2_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(3)
--    HASH_ZIP_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
--static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    UInt32 hash2Value;
--    SKIP_HEADER(3)
--    HASH3_CALC;
--    curMatch = p->hash[kFix3HashSize + hashValue];
--    p->hash[hash2Value] =
--    p->hash[kFix3HashSize + hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
- static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
- {
-   do
-@@ -701,61 +511,12 @@ static void Bt4_MatchFinder_Skip(CMatchF
-   while (--num != 0);
- }
- 
--static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    UInt32 hash2Value, hash3Value;
--    SKIP_HEADER(4)
--    HASH4_CALC;
--    curMatch = p->hash[kFix4HashSize + hashValue];
--    p->hash[                hash2Value] =
--    p->hash[kFix3HashSize + hash3Value] =
--    p->hash[kFix4HashSize + hashValue] = p->pos;
--    p->son[p->cyclicBufferPos] = curMatch;
--    MOVE_POS
--  }
--  while (--num != 0);
--}
--
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(3)
--    HASH_ZIP_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    p->son[p->cyclicBufferPos] = curMatch;
--    MOVE_POS
--  }
--  while (--num != 0);
--}
--
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
- {
-   vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-   vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-   vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-   vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
--  if (!p->btMode)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
--  }
--  else if (p->numHashBytes == 2)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
--  }
--  else if (p->numHashBytes == 3)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
--  }
--  else
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
--  }
-+  vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+  vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
- }
---- a/lib/lzma/LzmaDec.c
-+++ b/lib/lzma/LzmaDec.c
-@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
-   p->needFlush = 0;
- }
- 
--void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
- {
-   p->needFlush = 1;
-   p->remainLen = 0;
-@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
-     p->needInitState = 1;
- }
- 
--void LzmaDec_Init(CLzmaDec *p)
-+static void LzmaDec_Init(CLzmaDec *p)
- {
-   p->dicPos = 0;
-   LzmaDec_InitDicAndState(p, True, True);
-@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
-   p->needInitState = 0;
- }
- 
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-     ELzmaFinishMode finishMode, ELzmaStatus *status)
- {
-   SizeT inSize = *srcLen;
-@@ -837,65 +837,13 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
-   return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
- }
- 
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
--{
--  SizeT outSize = *destLen;
--  SizeT inSize = *srcLen;
--  *srcLen = *destLen = 0;
--  for (;;)
--  {
--    SizeT inSizeCur = inSize, outSizeCur, dicPos;
--    ELzmaFinishMode curFinishMode;
--    SRes res;
--    if (p->dicPos == p->dicBufSize)
--      p->dicPos = 0;
--    dicPos = p->dicPos;
--    if (outSize > p->dicBufSize - dicPos)
--    {
--      outSizeCur = p->dicBufSize;
--      curFinishMode = LZMA_FINISH_ANY;
--    }
--    else
--    {
--      outSizeCur = dicPos + outSize;
--      curFinishMode = finishMode;
--    }
--
--    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
--    src += inSizeCur;
--    inSize -= inSizeCur;
--    *srcLen += inSizeCur;
--    outSizeCur = p->dicPos - dicPos;
--    memcpy(dest, p->dic + dicPos, outSizeCur);
--    dest += outSizeCur;
--    outSize -= outSizeCur;
--    *destLen += outSizeCur;
--    if (res != 0)
--      return res;
--    if (outSizeCur == 0 || outSize == 0)
--      return SZ_OK;
--  }
--}
--
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
- {
-   alloc->Free(alloc, p->probs);
-   p->probs = 0;
- }
- 
--static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
--{
--  alloc->Free(alloc, p->dic);
--  p->dic = 0;
--}
--
--void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
--{
--  LzmaDec_FreeProbs(p, alloc);
--  LzmaDec_FreeDict(p, alloc);
--}
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
- {
-   UInt32 dicSize;
-   Byte d;
-@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
-   return SZ_OK;
- }
- 
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
- {
-   CLzmaProps propNew;
-   RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
-   p->prop = propNew;
-   return SZ_OK;
- }
--
--SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
--{
--  CLzmaProps propNew;
--  SizeT dicBufSize;
--  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
--  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
--  dicBufSize = propNew.dicSize;
--  if (p->dic == 0 || dicBufSize != p->dicBufSize)
--  {
--    LzmaDec_FreeDict(p, alloc);
--    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
--    if (p->dic == 0)
--    {
--      LzmaDec_FreeProbs(p, alloc);
--      return SZ_ERROR_MEM;
--    }
--  }
--  p->dicBufSize = dicBufSize;
--  p->prop = propNew;
--  return SZ_OK;
--}
- 
- SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-     const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
---- a/lib/lzma/LzmaEnc.c
-+++ b/lib/lzma/LzmaEnc.c
-@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
-   p->writeEndMark = 0;
- }
- 
--void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+static void LzmaEncProps_Normalize(CLzmaEncProps *p)
- {
-   int level = p->level;
-   if (level < 0) level = 5;
-@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
-       #endif
- }
- 
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
- {
-   CLzmaEncProps props = *props2;
-   LzmaEncProps_Normalize(&props);
-@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
- 
- #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
- 
--UInt32 GetPosSlot1(UInt32 pos)
-+static UInt32 GetPosSlot1(UInt32 pos)
- {
-   UInt32 res;
-   BSR2_RET(pos, res);
-@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
- #define kNumLogBits (9 + (int)sizeof(size_t) / 2)
- #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
- 
--void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+static void LzmaEnc_FastPosInit(Byte *g_FastPos)
- {
-   int c = 2, slotFast;
-   g_FastPos[0] = 0;
-@@ -339,58 +339,6 @@ typedef struct
-   CSaveState saveState;
- } CLzmaEnc;
- 
--void LzmaEnc_SaveState(CLzmaEncHandle pp)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  CSaveState *dest = &p->saveState;
--  int i;
--  dest->lenEnc = p->lenEnc;
--  dest->repLenEnc = p->repLenEnc;
--  dest->state = p->state;
--
--  for (i = 0; i < kNumStates; i++)
--  {
--    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
--    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
--  }
--  for (i = 0; i < kNumLenToPosStates; i++)
--    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
--  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
--  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
--  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
--  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
--  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
--  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
--  memcpy(dest->reps, p->reps, sizeof(p->reps));
--  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
--}
--
--void LzmaEnc_RestoreState(CLzmaEncHandle pp)
--{
--  CLzmaEnc *dest = (CLzmaEnc *)pp;
--  const CSaveState *p = &dest->saveState;
--  int i;
--  dest->lenEnc = p->lenEnc;
--  dest->repLenEnc = p->repLenEnc;
--  dest->state = p->state;
--
--  for (i = 0; i < kNumStates; i++)
--  {
--    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
--    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
--  }
--  for (i = 0; i < kNumLenToPosStates; i++)
--    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
--  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
--  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
--  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
--  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
--  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
--  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
--  memcpy(dest->reps, p->reps, sizeof(p->reps));
--  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
--}
--
- SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -600,7 +548,7 @@ static void LitEnc_EncodeMatched(CRangeE
-   while (symbol < 0x10000);
- }
- 
--void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
- {
-   UInt32 i;
-   for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-@@ -1676,7 +1624,7 @@ static void FillDistancesPrices(CLzmaEnc
-   p->matchPriceCount = 0;
- }
- 
--void LzmaEnc_Construct(CLzmaEnc *p)
-+static void LzmaEnc_Construct(CLzmaEnc *p)
- {
-   RangeEnc_Construct(&p->rc);
-   MatchFinder_Construct(&p->matchFinderBase);
-@@ -1709,7 +1657,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
-   return p;
- }
- 
--void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
- {
-   alloc->Free(alloc, p->litProbs);
-   alloc->Free(alloc, p->saveState.litProbs);
-@@ -1717,7 +1665,7 @@ void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAl
-   p->saveState.litProbs = 0;
- }
- 
--void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
-   #ifndef _7ZIP_ST
-   MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-@@ -1947,7 +1895,7 @@ static SRes LzmaEnc_Alloc(CLzmaEnc *p, U
-   return SZ_OK;
- }
- 
--void LzmaEnc_Init(CLzmaEnc *p)
-+static void LzmaEnc_Init(CLzmaEnc *p)
- {
-   UInt32 i;
-   p->state = 0;
-@@ -2005,7 +1953,7 @@ void LzmaEnc_Init(CLzmaEnc *p)
-   p->lpMask = (1 << p->lp) - 1;
- }
- 
--void LzmaEnc_InitPrices(CLzmaEnc *p)
-+static void LzmaEnc_InitPrices(CLzmaEnc *p)
- {
-   if (!p->fastMode)
-   {
-@@ -2037,26 +1985,6 @@ static SRes LzmaEnc_AllocAndInit(CLzmaEn
-   return SZ_OK;
- }
- 
--static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  p->matchFinderBase.stream = inStream;
--  p->needInit = 1;
--  p->rc.outStream = outStream;
--  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
--}
--
--SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
--    ISeqInStream *inStream, UInt32 keepWindowSize,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  p->matchFinderBase.stream = inStream;
--  p->needInit = 1;
--  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
--}
--
- static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
- {
-   p->matchFinderBase.directInput = 1;
-@@ -2064,7 +1992,7 @@ static void LzmaEnc_SetInputBuf(CLzmaEnc
-   p->matchFinderBase.directInputRem = srcLen;
- }
- 
--SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-     UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2074,7 +2002,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
-   return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
- }
- 
--void LzmaEnc_Finish(CLzmaEncHandle pp)
-+static void LzmaEnc_Finish(CLzmaEncHandle pp)
- {
-   #ifndef _7ZIP_ST
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2107,53 +2035,6 @@ static size_t MyWrite(void *pp, const vo
-   return size;
- }
- 
--
--UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
--{
--  const CLzmaEnc *p = (CLzmaEnc *)pp;
--  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
--}
--
--const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
--{
--  const CLzmaEnc *p = (CLzmaEnc *)pp;
--  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
--}
--
--SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
--    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  UInt64 nowPos64;
--  SRes res;
--  CSeqOutStreamBuf outStream;
--
--  outStream.funcTable.Write = MyWrite;
--  outStream.data = dest;
--  outStream.rem = *destLen;
--  outStream.overflow = False;
--
--  p->writeEndMark = False;
--  p->finished = False;
--  p->result = SZ_OK;
--
--  if (reInit)
--    LzmaEnc_Init(p);
--  LzmaEnc_InitPrices(p);
--  nowPos64 = p->nowPos64;
--  RangeEnc_Init(&p->rc);
--  p->rc.outStream = &outStream.funcTable;
--
--  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
--  
--  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
--  *destLen -= outStream.rem;
--  if (outStream.overflow)
--    return SZ_ERROR_OUTPUT_EOF;
--
--  return res;
--}
--
- static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
- {
-   SRes res = SZ_OK;
-@@ -2184,13 +2065,6 @@ static SRes LzmaEnc_Encode2(CLzmaEnc *p,
-   return res;
- }
- 
--SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
--  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
--}
--
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2247,25 +2121,3 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
-     return SZ_ERROR_OUTPUT_EOF;
-   return res;
- }
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
--    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
--  SRes res;
--  if (p == 0)
--    return SZ_ERROR_MEM;
--
--  res = LzmaEnc_SetProps(p, props);
--  if (res == SZ_OK)
--  {
--    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
--    if (res == SZ_OK)
--      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
--          writeEndMark, progress, alloc, allocBig);
--  }
--
--  LzmaEnc_Destroy(p, alloc, allocBig);
--  return res;
--}
diff --git a/target/linux/generic/hack-4.19/640-bridge-only-accept-EAP-locally.patch b/target/linux/generic/hack-4.19/640-bridge-only-accept-EAP-locally.patch
deleted file mode 100644
index 981d49b9c0..0000000000
--- a/target/linux/generic/hack-4.19/640-bridge-only-accept-EAP-locally.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From c6905cfdeb31a5c049db3da434b10fa0d3e83569 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:18:54 +0200
-Subject: bridge: only accept EAP locally
-
-When bridging, do not forward EAP frames to other ports, only deliver
-them locally, regardless of the state.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/bridge/br_input.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -110,10 +110,14 @@ int br_handle_frame_finish(struct net *n
- 		}
- 	}
- 
-+	BR_INPUT_SKB_CB(skb)->brdev = br->dev;
-+
-+	if (skb->protocol == htons(ETH_P_PAE))
-+		return br_pass_frame_up(skb);
-+
- 	if (p->state == BR_STATE_LEARNING)
- 		goto drop;
- 
--	BR_INPUT_SKB_CB(skb)->brdev = br->dev;
- 	BR_INPUT_SKB_CB(skb)->src_port_isolated = !!(p->flags & BR_ISOLATED);
- 
- 	if (IS_ENABLED(CONFIG_INET) &&
diff --git a/target/linux/generic/hack-4.19/647-netfilter-flow-acct.patch b/target/linux/generic/hack-4.19/647-netfilter-flow-acct.patch
deleted file mode 100644
index 2a9725f939..0000000000
--- a/target/linux/generic/hack-4.19/647-netfilter-flow-acct.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -163,6 +163,8 @@ struct nf_flow_table_hw {
- int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
- void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
- 
-+void nf_flow_table_acct(struct flow_offload *flow, struct sk_buff *skb, int dir);
-+
- extern struct work_struct nf_flow_offload_hw_work;
- 
- #define MODULE_ALIAS_NF_FLOWTABLE(family)	\
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -11,6 +11,7 @@
- #include <net/netfilter/nf_conntrack.h>
- #include <net/netfilter/nf_conntrack_core.h>
- #include <net/netfilter/nf_conntrack_tuple.h>
-+#include <net/netfilter/nf_conntrack_acct.h>
- 
- struct flow_offload_entry {
- 	struct flow_offload	flow;
-@@ -149,6 +150,22 @@ void flow_offload_free(struct flow_offlo
- }
- EXPORT_SYMBOL_GPL(flow_offload_free);
- 
-+void nf_flow_table_acct(struct flow_offload *flow, struct sk_buff *skb, int dir)
-+{
-+	struct flow_offload_entry *entry;
-+	struct nf_conn_acct *acct;
-+
-+	entry = container_of(flow, struct flow_offload_entry, flow);
-+	acct = nf_conn_acct_find(entry->ct);
-+	if (acct) {
-+		struct nf_conn_counter *counter = acct->counter;
-+
-+		atomic64_inc(&counter[dir].packets);
-+		atomic64_add(skb->len, &counter[dir].bytes);
-+	}
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_acct);
-+
- static u32 flow_offload_hash(const void *data, u32 len, u32 seed)
- {
- 	const struct flow_offload_tuple *tuple = data;
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -11,6 +11,7 @@
- #include <net/ip6_route.h>
- #include <net/neighbour.h>
- #include <net/netfilter/nf_flow_table.h>
-+
- /* For layer 4 checksum field offset. */
- #include <linux/tcp.h>
- #include <linux/udp.h>
-@@ -265,6 +266,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- 	skb->dev = outdev;
- 	nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
- 	skb_dst_set_noref(skb, &rt->dst);
-+	nf_flow_table_acct(flow, skb, dir);
- 	neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb);
- 
- 	return NF_STOLEN;
-@@ -482,6 +484,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- 	skb->dev = outdev;
- 	nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
- 	skb_dst_set_noref(skb, &rt->dst);
-+	nf_flow_table_acct(flow, skb, dir);
- 	neigh_xmit(NEIGH_ND_TABLE, outdev, nexthop, skb);
- 
- 	return NF_STOLEN;
diff --git a/target/linux/generic/hack-4.19/650-netfilter-add-xt_OFFLOAD-target.patch b/target/linux/generic/hack-4.19/650-netfilter-add-xt_OFFLOAD-target.patch
deleted file mode 100644
index 8ebea32a82..0000000000
--- a/target/linux/generic/hack-4.19/650-netfilter-add-xt_OFFLOAD-target.patch
+++ /dev/null
@@ -1,497 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 20 Feb 2018 15:56:02 +0100
-Subject: [PATCH] netfilter: add xt_OFFLOAD target
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- create mode 100644 net/netfilter/xt_OFFLOAD.c
-
---- a/net/ipv4/netfilter/Kconfig
-+++ b/net/ipv4/netfilter/Kconfig
-@@ -63,8 +63,6 @@ config NF_TABLES_ARP
- 	help
- 	  This option enables the ARP support for nf_tables.
- 
--endif # NF_TABLES
--
- config NF_FLOW_TABLE_IPV4
- 	tristate "Netfilter flow table IPv4 module"
- 	depends on NF_FLOW_TABLE
-@@ -73,6 +71,8 @@ config NF_FLOW_TABLE_IPV4
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_DUP_IPV4
- 	tristate "Netfilter IPv4 packet duplication to alternate destination"
- 	depends on !NF_CONNTRACK || NF_CONNTRACK
---- a/net/ipv6/netfilter/Kconfig
-+++ b/net/ipv6/netfilter/Kconfig
-@@ -80,7 +80,6 @@ config NFT_FIB_IPV6
- 	  multicast or blackhole.
- 
- endif # NF_TABLES_IPV6
--endif # NF_TABLES
- 
- config NF_FLOW_TABLE_IPV6
- 	tristate "Netfilter flow table IPv6 module"
-@@ -90,6 +89,8 @@ config NF_FLOW_TABLE_IPV6
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_DUP_IPV6
- 	tristate "Netfilter IPv6 packet duplication to alternate destination"
- 	depends on !NF_CONNTRACK || NF_CONNTRACK
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -693,8 +693,6 @@ config NFT_FIB_NETDEV
- 
- endif # NF_TABLES_NETDEV
- 
--endif # NF_TABLES
--
- config NF_FLOW_TABLE_INET
- 	tristate "Netfilter flow table mixed IPv4/IPv6 module"
- 	depends on NF_FLOW_TABLE
-@@ -703,11 +701,12 @@ config NF_FLOW_TABLE_INET
- 
- 	  To compile it as a module, choose M here.
- 
-+endif # NF_TABLES
-+
- config NF_FLOW_TABLE
- 	tristate "Netfilter flow table module"
- 	depends on NETFILTER_INGRESS
- 	depends on NF_CONNTRACK
--	depends on NF_TABLES
- 	help
- 	  This option adds the flow table core infrastructure.
- 
-@@ -996,6 +995,15 @@ config NETFILTER_XT_TARGET_NOTRACK
- 	depends on NETFILTER_ADVANCED
- 	select NETFILTER_XT_TARGET_CT
- 
-+config NETFILTER_XT_TARGET_FLOWOFFLOAD
-+	tristate '"FLOWOFFLOAD" target support'
-+	depends on NF_FLOW_TABLE
-+	depends on NETFILTER_INGRESS
-+	help
-+	  This option adds a `FLOWOFFLOAD' target, which uses the nf_flow_offload
-+	  module to speed up processing of packets by bypassing the usual
-+	  netfilter chains
-+
- config NETFILTER_XT_TARGET_RATEEST
- 	tristate '"RATEEST" target support'
- 	depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -144,6 +144,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIF
- obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
-+obj-$(CONFIG_NETFILTER_XT_TARGET_FLOWOFFLOAD) += xt_FLOWOFFLOAD.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
---- /dev/null
-+++ b/net/netfilter/xt_FLOWOFFLOAD.c
-@@ -0,0 +1,366 @@
-+/*
-+ * Copyright (C) 2018 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/netfilter.h>
-+#include <linux/netfilter/xt_FLOWOFFLOAD.h>
-+#include <net/ip.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_flow_table.h>
-+
-+static struct nf_flowtable nf_flowtable;
-+static HLIST_HEAD(hooks);
-+static DEFINE_SPINLOCK(hooks_lock);
-+static struct delayed_work hook_work;
-+
-+struct xt_flowoffload_hook {
-+	struct hlist_node list;
-+	struct nf_hook_ops ops;
-+	struct net *net;
-+	bool registered;
-+	bool used;
-+};
-+
-+static unsigned int
-+xt_flowoffload_net_hook(void *priv, struct sk_buff *skb,
-+			  const struct nf_hook_state *state)
-+{
-+	switch (skb->protocol) {
-+	case htons(ETH_P_IP):
-+		return nf_flow_offload_ip_hook(priv, skb, state);
-+	case htons(ETH_P_IPV6):
-+		return nf_flow_offload_ipv6_hook(priv, skb, state);
-+	}
-+
-+	return NF_ACCEPT;
-+}
-+
-+static int
-+xt_flowoffload_create_hook(struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+	struct nf_hook_ops *ops;
-+
-+	hook = kzalloc(sizeof(*hook), GFP_ATOMIC);
-+	if (!hook)
-+		return -ENOMEM;
-+
-+	ops = &hook->ops;
-+	ops->pf = NFPROTO_NETDEV;
-+	ops->hooknum = NF_NETDEV_INGRESS;
-+	ops->priority = 10;
-+	ops->priv = &nf_flowtable;
-+	ops->hook = xt_flowoffload_net_hook;
-+	ops->dev = dev;
-+
-+	hlist_add_head(&hook->list, &hooks);
-+	mod_delayed_work(system_power_efficient_wq, &hook_work, 0);
-+
-+	return 0;
-+}
-+
-+static struct xt_flowoffload_hook *
-+flow_offload_lookup_hook(struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+	hlist_for_each_entry(hook, &hooks, list) {
-+		if (hook->ops.dev == dev)
-+			return hook;
-+	}
-+
-+	return NULL;
-+}
-+
-+static void
-+xt_flowoffload_check_device(struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hook = flow_offload_lookup_hook(dev);
-+	if (hook)
-+		hook->used = true;
-+	else
-+		xt_flowoffload_create_hook(dev);
-+	spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_register_hooks(void)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+restart:
-+	hlist_for_each_entry(hook, &hooks, list) {
-+		if (hook->registered)
-+			continue;
-+
-+		hook->registered = true;
-+		hook->net = dev_net(hook->ops.dev);
-+		spin_unlock_bh(&hooks_lock);
-+		nf_register_net_hook(hook->net, &hook->ops);
-+		spin_lock_bh(&hooks_lock);
-+		goto restart;
-+	}
-+
-+}
-+
-+static void
-+xt_flowoffload_cleanup_hooks(void)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+restart:
-+	hlist_for_each_entry(hook, &hooks, list) {
-+		if (hook->used || !hook->registered)
-+			continue;
-+
-+		hlist_del(&hook->list);
-+		spin_unlock_bh(&hooks_lock);
-+		nf_unregister_net_hook(hook->net, &hook->ops);
-+		kfree(hook);
-+		spin_lock_bh(&hooks_lock);
-+		goto restart;
-+	}
-+
-+}
-+
-+static void
-+xt_flowoffload_check_hook(struct flow_offload *flow, void *data)
-+{
-+	struct flow_offload_tuple *tuple = &flow->tuplehash[0].tuple;
-+	struct xt_flowoffload_hook *hook;
-+	bool *found = data;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hlist_for_each_entry(hook, &hooks, list) {
-+		if (hook->ops.dev->ifindex != tuple->iifidx &&
-+		    hook->ops.dev->ifindex != tuple->oifidx)
-+			continue;
-+
-+		hook->used = true;
-+		*found = true;
-+	}
-+	spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_hook_work(struct work_struct *work)
-+{
-+	struct xt_flowoffload_hook *hook;
-+	bool found = false;
-+	int err;
-+
-+	spin_lock_bh(&hooks_lock);
-+	xt_flowoffload_register_hooks();
-+	hlist_for_each_entry(hook, &hooks, list)
-+		hook->used = false;
-+	spin_unlock_bh(&hooks_lock);
-+
-+	err = nf_flow_table_iterate(&nf_flowtable, xt_flowoffload_check_hook,
-+				    &found);
-+	if (err && err != -EAGAIN)
-+	    goto out;
-+
-+	spin_lock_bh(&hooks_lock);
-+	xt_flowoffload_cleanup_hooks();
-+	spin_unlock_bh(&hooks_lock);
-+
-+out:
-+	if (found)
-+		queue_delayed_work(system_power_efficient_wq, &hook_work, HZ);
-+}
-+
-+static bool
-+xt_flowoffload_skip(struct sk_buff *skb)
-+{
-+	struct ip_options *opt = &(IPCB(skb)->opt);
-+
-+	if (unlikely(opt->optlen))
-+		return true;
-+	if (skb_sec_path(skb))
-+		return true;
-+
-+	return false;
-+}
-+
-+static struct dst_entry *
-+xt_flowoffload_dst(const struct nf_conn *ct, enum ip_conntrack_dir dir,
-+		   const struct xt_action_param *par)
-+{
-+	struct dst_entry *dst = NULL;
-+	struct flowi fl;
-+
-+	memset(&fl, 0, sizeof(fl));
-+	switch (xt_family(par)) {
-+	case NFPROTO_IPV4:
-+		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
-+		break;
-+	case NFPROTO_IPV6:
-+		fl.u.ip6.saddr = ct->tuplehash[dir].tuple.dst.u3.in6;
-+		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
-+		break;
-+	}
-+
-+	nf_route(xt_net(par), &dst, &fl, false, xt_family(par));
-+
-+	return dst;
-+}
-+
-+static int
-+xt_flowoffload_route(struct sk_buff *skb, const struct nf_conn *ct,
-+		   const struct xt_action_param *par,
-+		   struct nf_flow_route *route, enum ip_conntrack_dir dir)
-+{
-+	struct dst_entry *this_dst, *other_dst;
-+
-+	this_dst = xt_flowoffload_dst(ct, dir, par);
-+	other_dst = xt_flowoffload_dst(ct, !dir, par);
-+	if (!this_dst || !other_dst)
-+		return -ENOENT;
-+
-+	if (dst_xfrm(this_dst) || dst_xfrm(other_dst))
-+		return -EINVAL;
-+
-+	route->tuple[dir].dst		= this_dst;
-+	route->tuple[!dir].dst		= other_dst;
-+
-+	return 0;
-+}
-+
-+static unsigned int
-+flowoffload_tg(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+	const struct xt_flowoffload_target_info *info = par->targinfo;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	struct nf_flow_route route;
-+	struct flow_offload *flow;
-+	struct nf_conn *ct;
-+
-+	if (xt_flowoffload_skip(skb))
-+		return XT_CONTINUE;
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (ct == NULL)
-+		return XT_CONTINUE;
-+
-+	switch (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum) {
-+	case IPPROTO_TCP:
-+		if (ct->proto.tcp.state != TCP_CONNTRACK_ESTABLISHED)
-+			return XT_CONTINUE;
-+		break;
-+	case IPPROTO_UDP:
-+		break;
-+	default:
-+		return XT_CONTINUE;
-+	}
-+
-+	if (test_bit(IPS_HELPER_BIT, &ct->status))
-+		return XT_CONTINUE;
-+
-+	if (ctinfo == IP_CT_NEW ||
-+	    ctinfo == IP_CT_RELATED)
-+		return XT_CONTINUE;
-+
-+	if (!xt_in(par) || !xt_out(par))
-+		return XT_CONTINUE;
-+
-+	if (test_and_set_bit(IPS_OFFLOAD_BIT, &ct->status))
-+		return XT_CONTINUE;
-+
-+	dir = CTINFO2DIR(ctinfo);
-+
-+	if (xt_flowoffload_route(skb, ct, par, &route, dir) < 0)
-+		goto err_flow_route;
-+
-+	flow = flow_offload_alloc(ct, &route);
-+	if (!flow)
-+		goto err_flow_alloc;
-+
-+	if (flow_offload_add(&nf_flowtable, flow) < 0)
-+		goto err_flow_add;
-+
-+	xt_flowoffload_check_device(xt_in(par));
-+	xt_flowoffload_check_device(xt_out(par));
-+
-+	if (info->flags & XT_FLOWOFFLOAD_HW)
-+		nf_flow_offload_hw_add(xt_net(par), flow, ct);
-+
-+	return XT_CONTINUE;
-+
-+err_flow_add:
-+	flow_offload_free(flow);
-+err_flow_alloc:
-+	dst_release(route.tuple[!dir].dst);
-+err_flow_route:
-+	clear_bit(IPS_OFFLOAD_BIT, &ct->status);
-+	return XT_CONTINUE;
-+}
-+
-+
-+static int flowoffload_chk(const struct xt_tgchk_param *par)
-+{
-+	struct xt_flowoffload_target_info *info = par->targinfo;
-+
-+	if (info->flags & ~XT_FLOWOFFLOAD_MASK)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static struct xt_target offload_tg_reg __read_mostly = {
-+	.family		= NFPROTO_UNSPEC,
-+	.name		= "FLOWOFFLOAD",
-+	.revision	= 0,
-+	.targetsize	= sizeof(struct xt_flowoffload_target_info),
-+	.usersize	= sizeof(struct xt_flowoffload_target_info),
-+	.checkentry	= flowoffload_chk,
-+	.target		= flowoffload_tg,
-+	.me		= THIS_MODULE,
-+};
-+
-+static int xt_flowoffload_table_init(struct nf_flowtable *table)
-+{
-+	table->flags = NF_FLOWTABLE_F_HW;
-+	nf_flow_table_init(table);
-+	return 0;
-+}
-+
-+static void xt_flowoffload_table_cleanup(struct nf_flowtable *table)
-+{
-+	nf_flow_table_free(table);
-+}
-+
-+static int __init xt_flowoffload_tg_init(void)
-+{
-+	int ret;
-+
-+	INIT_DELAYED_WORK(&hook_work, xt_flowoffload_hook_work);
-+
-+	ret = xt_flowoffload_table_init(&nf_flowtable);
-+	if (ret)
-+		return ret;
-+
-+	ret = xt_register_target(&offload_tg_reg);
-+	if (ret)
-+		xt_flowoffload_table_cleanup(&nf_flowtable);
-+
-+	return ret;
-+}
-+
-+static void __exit xt_flowoffload_tg_exit(void)
-+{
-+	xt_unregister_target(&offload_tg_reg);
-+	xt_flowoffload_table_cleanup(&nf_flowtable);
-+}
-+
-+MODULE_LICENSE("GPL");
-+module_init(xt_flowoffload_tg_init);
-+module_exit(xt_flowoffload_tg_exit);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -6,7 +6,6 @@
- #include <linux/netdevice.h>
- #include <net/ip.h>
- #include <net/ip6_route.h>
--#include <net/netfilter/nf_tables.h>
- #include <net/netfilter/nf_flow_table.h>
- #include <net/netfilter/nf_conntrack.h>
- #include <net/netfilter/nf_conntrack_core.h>
---- /dev/null
-+++ b/include/uapi/linux/netfilter/xt_FLOWOFFLOAD.h
-@@ -0,0 +1,17 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+#ifndef _XT_FLOWOFFLOAD_H
-+#define _XT_FLOWOFFLOAD_H
-+
-+#include <linux/types.h>
-+
-+enum {
-+	XT_FLOWOFFLOAD_HW	= 1 << 0,
-+
-+	XT_FLOWOFFLOAD_MASK	= XT_FLOWOFFLOAD_HW
-+};
-+
-+struct xt_flowoffload_target_info {
-+	__u32 flags;
-+};
-+
-+#endif /* _XT_FLOWOFFLOAD_H */
diff --git a/target/linux/generic/hack-4.19/651-wireless_mesh_header.patch b/target/linux/generic/hack-4.19/651-wireless_mesh_header.patch
deleted file mode 100644
index 965b431d01..0000000000
--- a/target/linux/generic/hack-4.19/651-wireless_mesh_header.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 6d3bc769657b0ee7c7506dad9911111c4226a7ea Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:21:05 +0200
-Subject: mac80211: increase wireless mesh header size
-
-lede-commit 3d4466cfd8f75f717efdb1f96fdde3c70d865fc1
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- include/linux/netdevice.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -140,8 +140,8 @@ static inline bool dev_xmit_complete(int
- 
- #if defined(CONFIG_HYPERV_NET)
- # define LL_MAX_HEADER 128
--#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
--# if defined(CONFIG_MAC80211_MESH)
-+#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) || 1
-+# if defined(CONFIG_MAC80211_MESH) || 1
- #  define LL_MAX_HEADER 128
- # else
- #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/hack-4.19/660-fq_codel_defaults.patch b/target/linux/generic/hack-4.19/660-fq_codel_defaults.patch
deleted file mode 100644
index 42698c6451..0000000000
--- a/target/linux/generic/hack-4.19/660-fq_codel_defaults.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a6ccb238939b25851474a279b20367fd24a0e816 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:21:53 +0200
-Subject:  hack: net: fq_codel: tune defaults for small devices
-
-Assume that x86_64 devices always have a big memory and do not need this 
-optimization compared to devices with only 32 MB or 64 MB RAM.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_fq_codel.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -474,7 +474,11 @@ static int fq_codel_init(struct Qdisc *s
- 
- 	sch->limit = 10*1024;
- 	q->flows_cnt = 1024;
-+#ifdef CONFIG_X86_64
- 	q->memory_limit = 32 << 20; /* 32 MBytes */
-+#else
-+	q->memory_limit = 4 << 20; /* 4 MBytes */
-+#endif
- 	q->drop_batch_size = 64;
- 	q->quantum = psched_mtu(qdisc_dev(sch));
- 	INIT_LIST_HEAD(&q->new_flows);
diff --git a/target/linux/generic/hack-4.19/661-use_fq_codel_by_default.patch b/target/linux/generic/hack-4.19/661-use_fq_codel_by_default.patch
deleted file mode 100644
index 817c41801f..0000000000
--- a/target/linux/generic/hack-4.19/661-use_fq_codel_by_default.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 1d418f7e88035ed7a94073f6354246c66e9193e9 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:22:58 +0200
-Subject: fq_codel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/net/sch_generic.h | 3 ++-
- net/sched/Kconfig         | 3 ++-
- net/sched/sch_api.c       | 2 +-
- net/sched/sch_fq_codel.c  | 3 ++-
- net/sched/sch_generic.c   | 4 ++--
- 5 files changed, 9 insertions(+), 6 deletions(-)
-
---- a/include/net/sch_generic.h
-+++ b/include/net/sch_generic.h
-@@ -481,12 +481,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
- extern struct Qdisc_ops pfifo_fast_ops;
- extern struct Qdisc_ops mq_qdisc_ops;
- extern struct Qdisc_ops noqueue_qdisc_ops;
-+extern struct Qdisc_ops fq_codel_qdisc_ops;
- extern const struct Qdisc_ops *default_qdisc_ops;
- static inline const struct Qdisc_ops *
- get_default_qdisc_ops(const struct net_device *dev, int ntx)
- {
- 	return ntx < dev->real_num_tx_queues ?
--			default_qdisc_ops : &pfifo_fast_ops;
-+			default_qdisc_ops : &fq_codel_qdisc_ops;
- }
- 
- struct Qdisc_class_common {
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -3,8 +3,9 @@
- #
- 
- menuconfig NET_SCHED
--	bool "QoS and/or fair queueing"
-+	def_bool y
- 	select NET_SCH_FIFO
-+	select NET_SCH_FQ_CODEL
- 	---help---
- 	  When the kernel has several packets to send out over a network
- 	  device, it has to decide which ones to send first, which ones to
---- a/net/sched/sch_api.c
-+++ b/net/sched/sch_api.c
-@@ -2157,7 +2157,7 @@ static int __init pktsched_init(void)
- 		return err;
- 	}
- 
--	register_qdisc(&pfifo_fast_ops);
-+	register_qdisc(&fq_codel_qdisc_ops);
- 	register_qdisc(&pfifo_qdisc_ops);
- 	register_qdisc(&bfifo_qdisc_ops);
- 	register_qdisc(&pfifo_head_drop_qdisc_ops);
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -716,7 +716,7 @@ static const struct Qdisc_class_ops fq_c
- 	.walk		=	fq_codel_walk,
- };
- 
--static struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
-+struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
- 	.cl_ops		=	&fq_codel_class_ops,
- 	.id		=	"fq_codel",
- 	.priv_size	=	sizeof(struct fq_codel_sched_data),
-@@ -731,6 +731,7 @@ static struct Qdisc_ops fq_codel_qdisc_o
- 	.dump_stats =	fq_codel_dump_stats,
- 	.owner		=	THIS_MODULE,
- };
-+EXPORT_SYMBOL(fq_codel_qdisc_ops);
- 
- static int __init fq_codel_module_init(void)
- {
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -35,7 +35,7 @@
- #include <net/xfrm.h>
- 
- /* Qdisc to use by default */
--const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops;
-+const struct Qdisc_ops *default_qdisc_ops = &fq_codel_qdisc_ops;
- EXPORT_SYMBOL(default_qdisc_ops);
- 
- /* Main transmission queue. */
-@@ -1004,7 +1004,7 @@ static void attach_one_default_qdisc(str
- 				     void *_unused)
- {
- 	struct Qdisc *qdisc;
--	const struct Qdisc_ops *ops = default_qdisc_ops;
-+	const struct Qdisc_ops *ops = &fq_codel_qdisc_ops;
- 
- 	if (dev->priv_flags & IFF_NO_QUEUE)
- 		ops = &noqueue_qdisc_ops;
diff --git a/target/linux/generic/hack-4.19/662-remove_pfifo_fast.patch b/target/linux/generic/hack-4.19/662-remove_pfifo_fast.patch
deleted file mode 100644
index 0009940cd1..0000000000
--- a/target/linux/generic/hack-4.19/662-remove_pfifo_fast.patch
+++ /dev/null
@@ -1,220 +0,0 @@
-From b531d492d5ef1cf9dba0f4888eb5fd8624a6d762 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:23:42 +0200
-Subject: net: sched: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_generic.c | 140 ------------------------------------------------
- 1 file changed, 140 deletions(-)
-
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -595,207 +595,6 @@ struct Qdisc_ops noqueue_qdisc_ops __rea
- 	.owner		=	THIS_MODULE,
- };
- 
--static const u8 prio2band[TC_PRIO_MAX + 1] = {
--	1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1
--};
--
--/* 3-band FIFO queue: old style, but should be a bit faster than
--   generic prio+fifo combination.
-- */
--
--#define PFIFO_FAST_BANDS 3
--
--/*
-- * Private data for a pfifo_fast scheduler containing:
-- *	- rings for priority bands
-- */
--struct pfifo_fast_priv {
--	struct skb_array q[PFIFO_FAST_BANDS];
--};
--
--static inline struct skb_array *band2list(struct pfifo_fast_priv *priv,
--					  int band)
--{
--	return &priv->q[band];
--}
--
--static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc *qdisc,
--			      struct sk_buff **to_free)
--{
--	int band = prio2band[skb->priority & TC_PRIO_MAX];
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	struct skb_array *q = band2list(priv, band);
--	unsigned int pkt_len = qdisc_pkt_len(skb);
--	int err;
--
--	err = skb_array_produce(q, skb);
--
--	if (unlikely(err))
--		return qdisc_drop_cpu(skb, qdisc, to_free);
--
--	qdisc_qstats_atomic_qlen_inc(qdisc);
--	/* Note: skb can not be used after skb_array_produce(),
--	 * so we better not use qdisc_qstats_cpu_backlog_inc()
--	 */
--	this_cpu_add(qdisc->cpu_qstats->backlog, pkt_len);
--	return NET_XMIT_SUCCESS;
--}
--
--static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	struct sk_buff *skb = NULL;
--	int band;
--
--	for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
--		struct skb_array *q = band2list(priv, band);
--
--		if (__skb_array_empty(q))
--			continue;
--
--		skb = __skb_array_consume(q);
--	}
--	if (likely(skb)) {
--		qdisc_qstats_cpu_backlog_dec(qdisc, skb);
--		qdisc_bstats_cpu_update(qdisc, skb);
--		qdisc_qstats_atomic_qlen_dec(qdisc);
--	}
--
--	return skb;
--}
--
--static struct sk_buff *pfifo_fast_peek(struct Qdisc *qdisc)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	struct sk_buff *skb = NULL;
--	int band;
--
--	for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
--		struct skb_array *q = band2list(priv, band);
--
--		skb = __skb_array_peek(q);
--	}
--
--	return skb;
--}
--
--static void pfifo_fast_reset(struct Qdisc *qdisc)
--{
--	int i, band;
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--
--	for (band = 0; band < PFIFO_FAST_BANDS; band++) {
--		struct skb_array *q = band2list(priv, band);
--		struct sk_buff *skb;
--
--		/* NULL ring is possible if destroy path is due to a failed
--		 * skb_array_init() in pfifo_fast_init() case.
--		 */
--		if (!q->ring.queue)
--			continue;
--
--		while ((skb = __skb_array_consume(q)) != NULL)
--			kfree_skb(skb);
--	}
--
--	for_each_possible_cpu(i) {
--		struct gnet_stats_queue *q = per_cpu_ptr(qdisc->cpu_qstats, i);
--
--		q->backlog = 0;
--	}
--}
--
--static int pfifo_fast_dump(struct Qdisc *qdisc, struct sk_buff *skb)
--{
--	struct tc_prio_qopt opt = { .bands = PFIFO_FAST_BANDS };
--
--	memcpy(&opt.priomap, prio2band, TC_PRIO_MAX + 1);
--	if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt))
--		goto nla_put_failure;
--	return skb->len;
--
--nla_put_failure:
--	return -1;
--}
--
--static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt,
--			   struct netlink_ext_ack *extack)
--{
--	unsigned int qlen = qdisc_dev(qdisc)->tx_queue_len;
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	int prio;
--
--	/* guard against zero length rings */
--	if (!qlen)
--		return -EINVAL;
--
--	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
--		struct skb_array *q = band2list(priv, prio);
--		int err;
--
--		err = skb_array_init(q, qlen, GFP_KERNEL);
--		if (err)
--			return -ENOMEM;
--	}
--
--	/* Can by-pass the queue discipline */
--	qdisc->flags |= TCQ_F_CAN_BYPASS;
--	return 0;
--}
--
--static void pfifo_fast_destroy(struct Qdisc *sch)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(sch);
--	int prio;
--
--	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
--		struct skb_array *q = band2list(priv, prio);
--
--		/* NULL ring is possible if destroy path is due to a failed
--		 * skb_array_init() in pfifo_fast_init() case.
--		 */
--		if (!q->ring.queue)
--			continue;
--		/* Destroy ring but no need to kfree_skb because a call to
--		 * pfifo_fast_reset() has already done that work.
--		 */
--		ptr_ring_cleanup(&q->ring, NULL);
--	}
--}
--
--static int pfifo_fast_change_tx_queue_len(struct Qdisc *sch,
--					  unsigned int new_len)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(sch);
--	struct skb_array *bands[PFIFO_FAST_BANDS];
--	int prio;
--
--	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
--		struct skb_array *q = band2list(priv, prio);
--
--		bands[prio] = q;
--	}
--
--	return skb_array_resize_multiple(bands, PFIFO_FAST_BANDS, new_len,
--					 GFP_KERNEL);
--}
--
--struct Qdisc_ops pfifo_fast_ops __read_mostly = {
--	.id		=	"pfifo_fast",
--	.priv_size	=	sizeof(struct pfifo_fast_priv),
--	.enqueue	=	pfifo_fast_enqueue,
--	.dequeue	=	pfifo_fast_dequeue,
--	.peek		=	pfifo_fast_peek,
--	.init		=	pfifo_fast_init,
--	.destroy	=	pfifo_fast_destroy,
--	.reset		=	pfifo_fast_reset,
--	.dump		=	pfifo_fast_dump,
--	.change_tx_queue_len =  pfifo_fast_change_tx_queue_len,
--	.owner		=	THIS_MODULE,
--	.static_flags	=	TCQ_F_NOLOCK | TCQ_F_CPUSTATS,
--};
--EXPORT_SYMBOL(pfifo_fast_ops);
--
- static struct lock_class_key qdisc_tx_busylock;
- static struct lock_class_key qdisc_running_key;
- 
diff --git a/target/linux/generic/hack-4.19/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-4.19/700-swconfig_switch_drivers.patch
deleted file mode 100644
index ebfcfe81c7..0000000000
--- a/target/linux/generic/hack-4.19/700-swconfig_switch_drivers.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:24:23 +0200
-Subject: net: swconfig: adds openwrt switch layer
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/net/phy/Kconfig   | 83 +++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/phy/Makefile  | 15 +++++++++
- include/uapi/linux/Kbuild |  1 +
- 3 files changed, 99 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -209,6 +209,89 @@ config LED_TRIGGER_PHY
- 		for any speed known to the PHY.
- 
- 
-+comment "Switch configuration API + drivers"
-+
-+config SWCONFIG
-+	tristate "Switch configuration API"
-+	---help---
-+	  Switch configuration API using netlink. This allows
-+	  you to configure the VLAN features of certain switches.
-+
-+config SWCONFIG_LEDS
-+	bool "Switch LED trigger support"
-+	depends on (SWCONFIG && LEDS_TRIGGERS)
-+
-+config ADM6996_PHY
-+	tristate "Driver for ADM6996 switches"
-+	select SWCONFIG
-+	---help---
-+	  Currently supports the ADM6996FC and ADM6996M switches.
-+	  Support for FC is very limited.
-+
-+config AR8216_PHY
-+	tristate "Driver for Atheros AR8216 switches"
-+	select ETHERNET_PACKET_MANGLE
-+	select SWCONFIG
-+
-+config AR8216_PHY_LEDS
-+	bool "Atheros AR8216 switch LED support"
-+	depends on (AR8216_PHY && LEDS_CLASS)
-+
-+source "drivers/net/phy/b53/Kconfig"
-+
-+config IP17XX_PHY
-+	tristate "Driver for IC+ IP17xx switches"
-+	select SWCONFIG
-+
-+config MVSWITCH_PHY
-+	tristate "Driver for Marvell 88E6060 switches"
-+	select ETHERNET_PACKET_MANGLE
-+
-+config MVSW61XX_PHY
-+	tristate "Driver for Marvell 88E6171/6172 switches"
-+	select SWCONFIG
-+
-+config PSB6970_PHY
-+	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
-+	select SWCONFIG
-+	select ETHERNET_PACKET_MANGLE
-+
-+config RTL8306_PHY
-+	tristate "Driver for Realtek RTL8306S switches"
-+	select SWCONFIG
-+
-+config RTL8366_SMI
-+	tristate "Driver for the RTL8366 SMI interface"
-+	depends on GPIOLIB
-+	---help---
-+	  This module implements the SMI interface protocol which is used
-+	  by some RTL8366 ethernet switch devices via the generic GPIO API.
-+
-+if RTL8366_SMI
-+
-+config RTL8366_SMI_DEBUG_FS
-+	bool "RTL8366 SMI interface debugfs support"
-+        depends on DEBUG_FS
-+        default n
-+
-+config RTL8366S_PHY
-+	tristate "Driver for the Realtek RTL8366S switch"
-+	select SWCONFIG
-+
-+config RTL8366RB_PHY
-+	tristate "Driver for the Realtek RTL8366RB switch"
-+	select SWCONFIG
-+
-+config RTL8367_PHY
-+	tristate "Driver for the Realtek RTL8367R/M switches"
-+	select SWCONFIG
-+
-+config RTL8367B_PHY
-+	tristate "Driver fot the Realtek RTL8367R-VB switch"
-+	select SWCONFIG
-+
-+endif # RTL8366_SMI
-+
- comment "MII PHY device drivers"
- 
- config SFP
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -22,6 +22,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
- obj-$(CONFIG_PHYLINK)		+= phylink.o
- obj-$(CONFIG_PHYLIB)		+= libphy.o
- 
-+obj-$(CONFIG_SWCONFIG)		+= swconfig.o
-+obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
-+obj-$(CONFIG_AR8216_PHY)	+= ar8216.o ar8327.o
-+obj-$(CONFIG_SWCONFIG_B53)	+= b53/
-+obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
-+obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
-+obj-$(CONFIG_MVSW61XX_PHY)	+= mvsw61xx.o
-+obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
-+obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
-+obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
-+obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
-+obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
-+obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
-+obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
-+
- obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
- obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
---- a/include/linux/platform_data/b53.h
-+++ b/include/linux/platform_data/b53.h
-@@ -29,6 +29,9 @@ struct b53_platform_data {
- 	u32 chip_id;
- 	u16 enabled_ports;
- 
-+	/* allow to specify an ethX alias */
-+	const char *alias;
-+
- 	/* only used by MMAP'd driver */
- 	unsigned big_endian:1;
- 	void __iomem *regs;
diff --git a/target/linux/generic/hack-4.19/702-phy_add_aneg_done_function.patch b/target/linux/generic/hack-4.19/702-phy_add_aneg_done_function.patch
deleted file mode 100644
index 6fbcd43d66..0000000000
--- a/target/linux/generic/hack-4.19/702-phy_add_aneg_done_function.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -548,6 +548,12 @@ struct phy_driver {
- 	/* Determines the negotiated speed and duplex */
- 	int (*read_status)(struct phy_device *phydev);
- 
-+	/* 
-+	 * Update the value in phydev->link to reflect the 
-+	 * current link value
-+	 */
-+	int (*update_link)(struct phy_device *phydev);
-+
- 	/* Clears any pending interrupts */
- 	int (*ack_interrupt)(struct phy_device *phydev);
- 
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1506,6 +1506,9 @@ int genphy_update_link(struct phy_device
- {
- 	int status;
- 
-+	if (phydev->drv && phydev->drv->update_link)
-+		return phydev->drv->update_link(phydev);
-+
- 	/* The link state is latched low so that momentary link
- 	 * drops can be detected. Do not double-read the status
- 	 * in polling mode to detect such short link drops.
diff --git a/target/linux/generic/hack-4.19/721-phy_packets.patch b/target/linux/generic/hack-4.19/721-phy_packets.patch
deleted file mode 100644
index 640ef37769..0000000000
--- a/target/linux/generic/hack-4.19/721-phy_packets.patch
+++ /dev/null
@@ -1,176 +0,0 @@
-From ffe387740bbe88dd88bbe04d6375902708003d6e Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:25:00 +0200
-Subject: net: add packet mangeling patch
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h | 11 +++++++++++
- include/linux/skbuff.h    | 14 ++++----------
- net/Kconfig               |  6 ++++++
- net/core/dev.c            | 18 ++++++++++++++----
- net/core/skbuff.c         | 17 +++++++++++++++++
- net/ethernet/eth.c        |  6 ++++++
- 6 files changed, 58 insertions(+), 14 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1514,6 +1514,7 @@ enum netdev_priv_flags {
- 	IFF_FAILOVER_SLAVE		= 1<<28,
- 	IFF_L3MDEV_RX_HANDLER		= 1<<29,
- 	IFF_LIVE_RENAME_OK		= 1<<30,
-+	IFF_NO_IP_ALIGN			= 1<<31,
- };
- 
- #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
-@@ -1546,6 +1547,7 @@ enum netdev_priv_flags {
- #define IFF_FAILOVER_SLAVE		IFF_FAILOVER_SLAVE
- #define IFF_L3MDEV_RX_HANDLER		IFF_L3MDEV_RX_HANDLER
- #define IFF_LIVE_RENAME_OK		IFF_LIVE_RENAME_OK
-+#define IFF_NO_IP_ALIGN			IFF_NO_IP_ALIGN
- 
- /**
-  *	struct net_device - The DEVICE structure.
-@@ -1844,6 +1846,11 @@ struct net_device {
- 	const struct tlsdev_ops *tlsdev_ops;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
-+	struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
-+#endif
-+
- 	const struct header_ops *header_ops;
- 
- 	unsigned int		flags;
-@@ -1919,6 +1926,10 @@ struct net_device {
- 	struct mpls_dev __rcu	*mpls_ptr;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void			*phy_ptr; /* PHY device specific data */
-+#endif
-+
- /*
-  * Cache lines mostly used on receive path (including eth_type_trans())
-  */
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2529,6 +2529,10 @@ static inline int pskb_trim(struct sk_bu
- 	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
- }
- 
-+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp);
-+
-+
- /**
-  *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
-  *	@skb: buffer to alter
-@@ -2660,16 +2664,6 @@ static inline struct sk_buff *dev_alloc_
- }
- 
- 
--static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
--		unsigned int length, gfp_t gfp)
--{
--	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
--
--	if (NET_IP_ALIGN && skb)
--		skb_reserve(skb, NET_IP_ALIGN);
--	return skb;
--}
--
- static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
- 		unsigned int length)
- {
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -25,6 +25,12 @@ menuconfig NET
- 
- if NET
- 
-+config ETHERNET_PACKET_MANGLE
-+	bool
-+	help
-+	  This option can be selected by phy drivers that need to mangle
-+	  packets going in or out of an ethernet device.
-+
- config WANT_COMPAT_NETLINK_MESSAGES
- 	bool
- 	help
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -3252,10 +3252,20 @@ static int xmit_one(struct sk_buff *skb,
- 	if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
- 		dev_queue_xmit_nit(skb, dev);
- 
--	len = skb->len;
--	trace_net_dev_start_xmit(skb, dev);
--	rc = netdev_start_xmit(skb, dev, txq, more);
--	trace_net_dev_xmit(skb, rc, dev, len);
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (!dev->eth_mangle_tx ||
-+	    (skb = dev->eth_mangle_tx(dev, skb)) != NULL)
-+#else
-+	if (1)
-+#endif
-+	{
-+		len = skb->len;
-+		trace_net_dev_start_xmit(skb, dev);
-+		rc = netdev_start_xmit(skb, dev, txq, more);
-+		trace_net_dev_xmit(skb, rc, dev, len);
-+	} else {
-+		rc = NETDEV_TX_OK;
-+	}
- 
- 	return rc;
- }
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -63,6 +63,7 @@
- #include <linux/errqueue.h>
- #include <linux/prefetch.h>
- #include <linux/if_vlan.h>
-+#include <linux/if.h>
- 
- #include <net/protocol.h>
- #include <net/dst.h>
-@@ -503,6 +504,22 @@ skb_fail:
- }
- EXPORT_SYMBOL(__napi_alloc_skb);
- 
-+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp)
-+{
-+	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
-+		return skb;
-+#endif
-+
-+	if (NET_IP_ALIGN && skb)
-+		skb_reserve(skb, NET_IP_ALIGN);
-+	return skb;
-+}
-+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
-+
- void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
- 		     int size, unsigned int truesize)
- {
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -172,6 +172,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- 	const struct ethhdr *eth;
- 
- 	skb->dev = dev;
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev->eth_mangle_rx)
-+		dev->eth_mangle_rx(dev, skb);
-+#endif
-+
- 	skb_reset_mac_header(skb);
- 
- 	eth = (struct ethhdr *)skb->data;
diff --git a/target/linux/generic/hack-4.19/773-bgmac-add-srab-switch.patch b/target/linux/generic/hack-4.19/773-bgmac-add-srab-switch.patch
deleted file mode 100644
index 3b4781657e..0000000000
--- a/target/linux/generic/hack-4.19/773-bgmac-add-srab-switch.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 7 Jul 2017 17:26:01 +0200
-Subject: bcm53xx: bgmac: use srab switch driver
-
-use the srab switch driver on these SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c |  1 +
- drivers/net/ethernet/broadcom/bgmac.c      | 24 ++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/bgmac.h      |  4 ++++
- 3 files changed, 29 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -268,6 +268,7 @@ static int bgmac_probe(struct bcma_devic
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- 		bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
- 		bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
-+		bgmac->feature_flags |= BGMAC_FEAT_SRAB;
- 		break;
- 	default:
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -12,6 +12,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/etherdevice.h>
- #include <linux/interrupt.h>
-+#include <linux/platform_data/b53.h>
- #include <linux/bcm47xx_nvram.h>
- #include <linux/phy.h>
- #include <linux/phy_fixed.h>
-@@ -1409,6 +1410,17 @@ static const struct ethtool_ops bgmac_et
- 	.set_link_ksettings     = phy_ethtool_set_link_ksettings,
- };
- 
-+static struct b53_platform_data bgmac_b53_pdata = {
-+};
-+
-+static struct platform_device bgmac_b53_dev = {
-+	.name		= "b53-srab-switch",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &bgmac_b53_pdata,
-+	},
-+};
-+
- /**************************************************
-  * MII
-  **************************************************/
-@@ -1540,6 +1552,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
- 	net_dev->hw_features = net_dev->features;
- 	net_dev->vlan_features = net_dev->features;
- 
-+	if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) {
-+		bgmac_b53_pdata.regs = ioremap_nocache(0x18007000, 0x1000);
-+
-+		err = platform_device_register(&bgmac_b53_dev);
-+		if (!err)
-+			bgmac->b53_device = &bgmac_b53_dev;
-+	}
-+
- 	err = register_netdev(bgmac->net_dev);
- 	if (err) {
- 		dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1562,6 +1582,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
- 
- void bgmac_enet_remove(struct bgmac *bgmac)
- {
-+	if (bgmac->b53_device)
-+		platform_device_unregister(&bgmac_b53_dev);
-+	bgmac->b53_device = NULL;
-+
- 	unregister_netdev(bgmac->net_dev);
- 	phy_disconnect(bgmac->net_dev->phydev);
- 	netif_napi_del(&bgmac->napi);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -427,6 +427,7 @@
- #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII	BIT(18)
- #define BGMAC_FEAT_CC7_IF_TYPE_RGMII	BIT(19)
- #define BGMAC_FEAT_IDM_MASK		BIT(20)
-+#define BGMAC_FEAT_SRAB			BIT(21)
- 
- struct bgmac_slot_info {
- 	union {
-@@ -532,6 +533,9 @@ struct bgmac {
- 	void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
- 			      u32 set);
- 	int (*phy_connect)(struct bgmac *bgmac);
-+
-+	/* platform device for associated switch */
-+	struct platform_device *b53_device;
- };
- 
- struct bgmac *bgmac_alloc(struct device *dev);
diff --git a/target/linux/generic/hack-4.19/835-misc-owl_loader.patch b/target/linux/generic/hack-4.19/835-misc-owl_loader.patch
deleted file mode 100644
index bf0fa596ac..0000000000
--- a/target/linux/generic/hack-4.19/835-misc-owl_loader.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From dd36f935973d91644449bd9749f6062a2bed821b Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Fri, 7 Jul 2017 17:26:46 +0200
-Subject: misc: owl-loader for delayed Atheros ath9k fixup
-
-Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
-need to be able to initialize the PCIe wifi device. Normally, this is done
-during the early stages of booting linux, because the necessary init code
-is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup.
-However,this isn't possible for devices which have the init code for the
-Atheros chip stored on NAND in an UBI volume. Hence, this module can be
-used to initialze the chip when the user-space is ready to extract the
-init code.
-
-Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
----
- drivers/misc/Kconfig  | 12 ++++++++++++
- drivers/misc/Makefile |  1 +
- 2 files changed, 13 insertions(+)
-
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -164,6 +164,18 @@ config SGI_IOC4
- 	  If you have an SGI Altix with an IOC4-based card say Y.
- 	  Otherwise say N.
- 
-+config OWL_LOADER
-+	tristate "Owl loader for initializing Atheros PCI(e) Wifi chips"
-+	depends on PCI
-+	---help---
-+	This kernel module helps to initialize certain Qualcomm
-+	Atheros' PCI(e) Wifi chips, which have the init data
-+	(which contains the PCI device ID for example) stored
-+	together with the calibration data in the file system.
-+
-+	This is necessary for devices like the Cisco Meraki Z1, say M.
-+	Otherwise say N.
-+
- config TIFM_CORE
- 	tristate "TI Flash Media interface support"
- 	depends on PCI
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib
- obj-$(CONFIG_DUMMY_IRQ)		+= dummy-irq.o
- obj-$(CONFIG_ICS932S401)	+= ics932s401.o
- obj-$(CONFIG_LKDTM)		+= lkdtm/
-+obj-$(CONFIG_OWL_LOADER)	+= owl-loader.o
- obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
- obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
- obj-$(CONFIG_PHANTOM)		+= phantom.o
diff --git a/target/linux/generic/hack-4.19/901-debloat_sock_diag.patch b/target/linux/generic/hack-4.19/901-debloat_sock_diag.patch
deleted file mode 100644
index 33c8b72317..0000000000
--- a/target/linux/generic/hack-4.19/901-debloat_sock_diag.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 3b6115d6b57a263bdc8c9b1df273bd4a7955eead Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:16:31 +0200
-Subject: debloat: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/Kconfig         | 3 +++
- net/core/Makefile   | 3 ++-
- net/core/sock.c     | 2 ++
- net/ipv4/Kconfig    | 1 +
- net/netlink/Kconfig | 1 +
- net/packet/Kconfig  | 1 +
- net/unix/Kconfig    | 1 +
- 7 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -98,6 +98,9 @@ source "net/netlabel/Kconfig"
- 
- endif # if INET
- 
-+config SOCK_DIAG
-+	bool
-+
- config NETWORK_SECMARK
- 	bool "Security Marking"
- 	help
---- a/net/core/Makefile
-+++ b/net/core/Makefile
-@@ -10,9 +10,10 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.
- 
- obj-y		     += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \
- 			neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
--			sock_diag.o dev_ioctl.o tso.o sock_reuseport.o \
-+ 			dev_ioctl.o tso.o sock_reuseport.o \
- 			fib_notifier.o xdp.o
- 
-+obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
- obj-y += net-sysfs.o
- obj-$(CONFIG_PAGE_POOL) += page_pool.o
- obj-$(CONFIG_PROC_FS) += net-procfs.o
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -490,6 +490,18 @@ discard_and_relse:
- }
- EXPORT_SYMBOL(__sk_receive_skb);
- 
-+u64 sock_gen_cookie(struct sock *sk)
-+{
-+	while (1) {
-+		u64 res = atomic64_read(&sk->sk_cookie);
-+
-+		if (res)
-+			return res;
-+		res = atomic64_inc_return(&sock_net(sk)->cookie_gen);
-+		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
-+	}
-+}
-+
- struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
- {
- 	struct dst_entry *dst = __sk_dst_get(sk);
-@@ -1601,9 +1613,11 @@ static void __sk_free(struct sock *sk)
- 	if (likely(sk->sk_net_refcnt))
- 		sock_inuse_add(sock_net(sk), -1);
- 
-+#ifdef CONFIG_SOCK_DIAG
- 	if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
- 		sock_diag_broadcast_destroy(sk);
- 	else
-+#endif
- 		sk_destruct(sk);
- }
- 
---- a/net/core/sock_diag.c
-+++ b/net/core/sock_diag.c
-@@ -20,18 +20,6 @@ static int (*inet_rcv_compat)(struct sk_
- static DEFINE_MUTEX(sock_diag_table_mutex);
- static struct workqueue_struct *broadcast_wq;
- 
--u64 sock_gen_cookie(struct sock *sk)
--{
--	while (1) {
--		u64 res = atomic64_read(&sk->sk_cookie);
--
--		if (res)
--			return res;
--		res = atomic64_inc_return(&sock_net(sk)->cookie_gen);
--		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
--	}
--}
--
- int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie)
- {
- 	u64 res;
---- a/net/ipv4/Kconfig
-+++ b/net/ipv4/Kconfig
-@@ -425,6 +425,7 @@ config INET_XFRM_MODE_BEET
- 
- config INET_DIAG
- 	tristate "INET: socket monitoring interface"
-+	select SOCK_DIAG
- 	default y
- 	---help---
- 	  Support for INET (TCP, DCCP, etc) socket monitoring interface used by
---- a/net/netlink/Kconfig
-+++ b/net/netlink/Kconfig
-@@ -4,6 +4,7 @@
- 
- config NETLINK_DIAG
- 	tristate "NETLINK: socket monitoring interface"
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for NETLINK socket monitoring interface used by the ss tool.
---- a/net/packet/Kconfig
-+++ b/net/packet/Kconfig
-@@ -18,6 +18,7 @@ config PACKET
- config PACKET_DIAG
- 	tristate "Packet: sockets monitoring interface"
- 	depends on PACKET
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for PF_PACKET sockets monitoring interface used by the ss tool.
---- a/net/unix/Kconfig
-+++ b/net/unix/Kconfig
-@@ -22,6 +22,7 @@ config UNIX
- config UNIX_DIAG
- 	tristate "UNIX: socket monitoring interface"
- 	depends on UNIX
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for UNIX socket monitoring interface used by the ss tool.
diff --git a/target/linux/generic/hack-4.19/902-debloat_proc.patch b/target/linux/generic/hack-4.19/902-debloat_proc.patch
deleted file mode 100644
index 89d9cf0893..0000000000
--- a/target/linux/generic/hack-4.19/902-debloat_proc.patch
+++ /dev/null
@@ -1,405 +0,0 @@
-From 9e3f1d0805b2d919904dd9a4ff0d956314cc3cba Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:09 +0200
-Subject: debloat: procfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/locks.c               |  2 ++
- fs/proc/Kconfig          |  5 +++++
- fs/proc/consoles.c       |  3 +++
- fs/proc/proc_tty.c       | 11 ++++++++++-
- include/net/snmp.h       | 18 +++++++++++++++++-
- ipc/msg.c                |  3 +++
- ipc/sem.c                |  2 ++
- ipc/shm.c                |  2 ++
- ipc/util.c               |  3 +++
- kernel/exec_domain.c     |  2 ++
- kernel/irq/proc.c        |  9 +++++++++
- kernel/time/timer_list.c |  2 ++
- mm/vmalloc.c             |  2 ++
- mm/vmstat.c              |  8 +++++---
- net/8021q/vlanproc.c     |  6 ++++++
- net/core/net-procfs.c    | 18 ++++++++++++------
- net/core/sock.c          |  2 ++
- net/ipv4/fib_trie.c      | 18 ++++++++++++------
- net/ipv4/proc.c          |  3 +++
- net/ipv4/route.c         |  3 +++
- 20 files changed, 105 insertions(+), 17 deletions(-)
-
---- a/fs/locks.c
-+++ b/fs/locks.c
-@@ -2786,6 +2786,8 @@ static const struct seq_operations locks
- 
- static int __init proc_locks_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create_seq_private("locks", 0, NULL, &locks_seq_operations,
- 			sizeof(struct locks_iterator), NULL);
- 	return 0;
---- a/fs/proc/Kconfig
-+++ b/fs/proc/Kconfig
-@@ -97,3 +97,8 @@ config PROC_CHILDREN
- 
- 	  Say Y if you are running any user-space software which takes benefit from
- 	  this interface. For example, rkt is such a piece of software.
-+
-+config PROC_STRIPPED
-+	default n
-+	depends on EXPERT
-+	bool "Strip non-essential /proc functionality to reduce code size"
---- a/fs/proc/consoles.c
-+++ b/fs/proc/consoles.c
-@@ -93,6 +93,9 @@ static const struct seq_operations conso
- 
- static int __init proc_consoles_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	proc_create_seq("consoles", 0, NULL, &consoles_op);
- 	return 0;
- }
---- a/fs/proc/proc_tty.c
-+++ b/fs/proc/proc_tty.c
-@@ -133,7 +133,10 @@ static const struct seq_operations tty_d
- void proc_tty_register_driver(struct tty_driver *driver)
- {
- 	struct proc_dir_entry *ent;
--		
-+
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!driver->driver_name || driver->proc_entry ||
- 	    !driver->ops->proc_show)
- 		return;
-@@ -150,6 +153,9 @@ void proc_tty_unregister_driver(struct t
- {
- 	struct proc_dir_entry *ent;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ent = driver->proc_entry;
- 	if (!ent)
- 		return;
-@@ -164,6 +170,9 @@ void proc_tty_unregister_driver(struct t
-  */
- void __init proc_tty_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!proc_mkdir("tty", NULL))
- 		return;
- 	proc_mkdir("tty/ldisc", NULL);	/* Preserved: it's userspace visible */
---- a/include/net/snmp.h
-+++ b/include/net/snmp.h
-@@ -123,6 +123,21 @@ struct linux_xfrm_mib {
- #define DECLARE_SNMP_STAT(type, name)	\
- 	extern __typeof__(type) __percpu *name
- 
-+#ifdef CONFIG_PROC_STRIPPED
-+#define __SNMP_STATS_DUMMY(mib)	\
-+	do { (void) mib->mibs[0]; } while(0)
-+
-+#define __SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_DEC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+
-+#else
-+
- #define __SNMP_INC_STATS(mib, field)	\
- 			__this_cpu_inc(mib->mibs[field])
- 
-@@ -153,8 +168,9 @@ struct linux_xfrm_mib {
- 		__this_cpu_add(ptr[basefield##OCTETS], addend);	\
- 	} while (0)
- 
-+#endif
- 
--#if BITS_PER_LONG==32
-+#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED)
- 
- #define __SNMP_ADD_STATS64(mib, field, addend) 				\
- 	do {								\
---- a/ipc/msg.c
-+++ b/ipc/msg.c
-@@ -1291,6 +1291,9 @@ void __init msg_init(void)
- {
- 	msg_init_ns(&init_ipc_ns);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ipc_init_proc_interface("sysvipc/msg",
- 				"       key      msqid perms      cbytes       qnum lspid lrpid   uid   gid  cuid  cgid      stime      rtime      ctime\n",
- 				IPC_MSG_IDS, sysvipc_msg_proc_show);
---- a/ipc/sem.c
-+++ b/ipc/sem.c
-@@ -243,6 +243,8 @@ void sem_exit_ns(struct ipc_namespace *n
- void __init sem_init(void)
- {
- 	sem_init_ns(&init_ipc_ns);
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/sem",
- 				"       key      semid perms      nsems   uid   gid  cuid  cgid      otime      ctime\n",
- 				IPC_SEM_IDS, sysvipc_sem_proc_show);
---- a/ipc/shm.c
-+++ b/ipc/shm.c
-@@ -144,6 +144,8 @@ pure_initcall(ipc_ns_init);
- 
- void __init shm_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/shm",
- #if BITS_PER_LONG <= 32
- 				"       key      shmid perms       size  cpid  lpid nattch   uid   gid  cuid  cgid      atime      dtime      ctime        rss       swap\n",
---- a/ipc/util.c
-+++ b/ipc/util.c
-@@ -140,6 +140,9 @@ void __init ipc_init_proc_interface(cons
- 	struct proc_dir_entry *pde;
- 	struct ipc_proc_iface *iface;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	iface = kmalloc(sizeof(*iface), GFP_KERNEL);
- 	if (!iface)
- 		return;
---- a/kernel/exec_domain.c
-+++ b/kernel/exec_domain.c
-@@ -29,6 +29,8 @@ static int execdomains_proc_show(struct
- 
- static int __init proc_execdomains_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create_single("execdomains", 0, NULL, execdomains_proc_show);
- 	return 0;
- }
---- a/kernel/irq/proc.c
-+++ b/kernel/irq/proc.c
-@@ -333,6 +333,9 @@ void register_irq_proc(unsigned int irq,
- 	void __maybe_unused *irqp = (void *)(unsigned long) irq;
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
- 		return;
- 
-@@ -386,6 +389,9 @@ void unregister_irq_proc(unsigned int ir
- {
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || !desc->dir)
- 		return;
- #ifdef CONFIG_SMP
-@@ -424,6 +430,9 @@ void init_irq_proc(void)
- 	unsigned int irq;
- 	struct irq_desc *desc;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	/* create /proc/irq */
- 	root_irq_dir = proc_mkdir("irq", NULL);
- 	if (!root_irq_dir)
---- a/kernel/time/timer_list.c
-+++ b/kernel/time/timer_list.c
-@@ -374,6 +374,8 @@ static int __init init_timer_list_procfs
- {
- 	struct proc_dir_entry *pe;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	pe = proc_create_seq_private("timer_list", 0400, NULL, &timer_list_sops,
- 			sizeof(struct timer_list_iter), NULL);
- 	if (!pe)
---- a/mm/vmalloc.c
-+++ b/mm/vmalloc.c
-@@ -2740,6 +2740,8 @@ static const struct seq_operations vmall
- 
- static int __init proc_vmalloc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	if (IS_ENABLED(CONFIG_NUMA))
- 		proc_create_seq_private("vmallocinfo", 0400, NULL,
- 				&vmalloc_op,
---- a/mm/vmstat.c
-+++ b/mm/vmstat.c
-@@ -1971,10 +1971,12 @@ void __init init_mm_internals(void)
- 	start_shepherd_timer();
- #endif
- #ifdef CONFIG_PROC_FS
--	proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
--	proc_create_seq("pagetypeinfo", 0444, NULL, &pagetypeinfo_op);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
-+		proc_create_seq("pagetypeinfo", 0444, NULL, &pagetypeinfo_op);
-+		proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
-+	}
- 	proc_create_seq("vmstat", 0444, NULL, &vmstat_op);
--	proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
- #endif
- }
- 
---- a/net/8021q/vlanproc.c
-+++ b/net/8021q/vlanproc.c
-@@ -96,6 +96,9 @@ void vlan_proc_cleanup(struct net *net)
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (vn->proc_vlan_conf)
- 		remove_proc_entry(name_conf, vn->proc_vlan_dir);
- 
-@@ -115,6 +118,9 @@ int __net_init vlan_proc_init(struct net
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net);
- 	if (!vn->proc_vlan_dir)
- 		goto err;
---- a/net/core/net-procfs.c
-+++ b/net/core/net-procfs.c
-@@ -279,10 +279,12 @@ static int __net_init dev_proc_net_init(
- 	if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops,
- 			sizeof(struct seq_net_private)))
- 		goto out;
--	if (!proc_create_seq("softnet_stat", 0444, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_seq("softnet_stat", 0444, net->proc_net,
- 			 &softnet_seq_ops))
- 		goto out_dev;
--	if (!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
- 			sizeof(struct seq_net_private)))
- 		goto out_softnet;
- 
-@@ -292,9 +294,11 @@ static int __net_init dev_proc_net_init(
- out:
- 	return rc;
- out_ptype:
--	remove_proc_entry("ptype", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("ptype", net->proc_net);
- out_softnet:
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("softnet_stat", net->proc_net);
- out_dev:
- 	remove_proc_entry("dev", net->proc_net);
- 	goto out;
-@@ -304,8 +308,10 @@ static void __net_exit dev_proc_net_exit
- {
- 	wext_proc_exit(net);
- 
--	remove_proc_entry("ptype", net->proc_net);
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("ptype", net->proc_net);
-+		remove_proc_entry("softnet_stat", net->proc_net);
-+	}
- 	remove_proc_entry("dev", net->proc_net);
- }
- 
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -3483,6 +3483,8 @@ static __net_initdata struct pernet_oper
- 
- static int __init proto_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	return register_pernet_subsys(&proto_net_ops);
- }
- 
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2717,11 +2717,13 @@ static const struct seq_operations fib_r
- 
- int __net_init fib_proc_init(struct net *net)
- {
--	if (!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
- 			sizeof(struct fib_trie_iter)))
- 		goto out1;
- 
--	if (!proc_create_net_single("fib_triestat", 0444, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net_single("fib_triestat", 0444, net->proc_net,
- 			fib_triestat_seq_show, NULL))
- 		goto out2;
- 
-@@ -2732,17 +2734,21 @@ int __net_init fib_proc_init(struct net
- 	return 0;
- 
- out3:
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_triestat", net->proc_net);
- out2:
--	remove_proc_entry("fib_trie", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_trie", net->proc_net);
- out1:
- 	return -ENOMEM;
- }
- 
- void __net_exit fib_proc_exit(struct net *net)
- {
--	remove_proc_entry("fib_trie", net->proc_net);
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("fib_trie", net->proc_net);
-+		remove_proc_entry("fib_triestat", net->proc_net);
-+	}
- 	remove_proc_entry("route", net->proc_net);
- }
- 
---- a/net/ipv4/proc.c
-+++ b/net/ipv4/proc.c
-@@ -523,5 +523,8 @@ static __net_initdata struct pernet_oper
- 
- int __init ip_misc_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_proc_ops);
- }
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -410,6 +410,9 @@ static struct pernet_operations ip_rt_pr
- 
- static int __init ip_rt_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_rt_proc_ops);
- }
- 
diff --git a/target/linux/generic/hack-4.19/904-debloat_dma_buf.patch b/target/linux/generic/hack-4.19/904-debloat_dma_buf.patch
deleted file mode 100644
index a4b6e36d07..0000000000
--- a/target/linux/generic/hack-4.19/904-debloat_dma_buf.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From e3692cb2fcd5ba1244512a0f43b8118f65f1c375 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:43 +0200
-Subject: debloat: dmabuf
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/Kconfig      |  2 +-
- drivers/dma-buf/Makefile  | 10 +++++++---
- drivers/dma-buf/dma-buf.c |  4 +++-
- kernel/sched/core.c       |  1 +
- 4 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/base/Kconfig
-+++ b/drivers/base/Kconfig
-@@ -172,7 +172,7 @@ config SOC_BUS
- source "drivers/base/regmap/Kconfig"
- 
- config DMA_SHARED_BUFFER
--	bool
-+	tristate
- 	default n
- 	select ANON_INODES
- 	select IRQ_WORK
---- a/drivers/dma-buf/Makefile
-+++ b/drivers/dma-buf/Makefile
-@@ -1,3 +1,7 @@
--obj-y := dma-buf.o dma-fence.o dma-fence-array.o reservation.o seqno-fence.o
--obj-$(CONFIG_SYNC_FILE)		+= sync_file.o
--obj-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
-+obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o
-+
-+dma-buf-objs-y := dma-buf.o dma-fence.o dma-fence-array.o reservation.o seqno-fence.o
-+dma-buf-objs-$(CONFIG_SYNC_FILE)		+= sync_file.o
-+dma-buf-objs-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
-+
-+dma-shared-buffer-objs :=  $(dma-buf-objs-y)
---- a/drivers/dma-buf/dma-buf.c
-+++ b/drivers/dma-buf/dma-buf.c
-@@ -34,6 +34,7 @@
- #include <linux/poll.h>
- #include <linux/reservation.h>
- #include <linux/mm.h>
-+#include <linux/module.h>
- 
- #include <uapi/linux/dma-buf.h>
- 
-@@ -1158,4 +1159,5 @@ static void __exit dma_buf_deinit(void)
- {
- 	dma_buf_uninit_debugfs();
- }
--__exitcall(dma_buf_deinit);
-+module_exit(dma_buf_deinit);
-+MODULE_LICENSE("GPL");
---- a/kernel/sched/core.c
-+++ b/kernel/sched/core.c
-@@ -2129,6 +2129,7 @@ int wake_up_state(struct task_struct *p,
- {
- 	return try_to_wake_up(p, state, 0);
- }
-+EXPORT_SYMBOL_GPL(wake_up_state);
- 
- /*
-  * Perform scheduler related setup for a newly forked process p.
diff --git a/target/linux/generic/hack-4.19/910-kobject_uevent.patch b/target/linux/generic/hack-4.19/910-kobject_uevent.patch
deleted file mode 100644
index c4c41ca400..0000000000
--- a/target/linux/generic/hack-4.19/910-kobject_uevent.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -179,6 +179,18 @@ out:
- 	return r;
- }
- 
-+u64 uevent_next_seqnum(void)
-+{
-+	u64 seq;
-+
-+	mutex_lock(&uevent_sock_mutex);
-+	seq = ++uevent_seqnum;
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	return seq;
-+}
-+EXPORT_SYMBOL_GPL(uevent_next_seqnum);
-+
- /**
-  * kobject_synth_uevent - send synthetic uevent with arguments
-  *
diff --git a/target/linux/generic/hack-4.19/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/hack-4.19/911-kobject_add_broadcast_uevent.patch
deleted file mode 100644
index 06b94117c1..0000000000
--- a/target/linux/generic/hack-4.19/911-kobject_add_broadcast_uevent.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/include/linux/kobject.h
-+++ b/include/linux/kobject.h
-@@ -32,6 +32,8 @@
- #define UEVENT_NUM_ENVP			32	/* number of env pointers */
- #define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
- 
-+struct sk_buff;
-+
- #ifdef CONFIG_UEVENT_HELPER
- /* path to the userspace helper executed on an event */
- extern char uevent_helper[];
-@@ -244,4 +246,7 @@ int kobject_synth_uevent(struct kobject
- __printf(2, 3)
- int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
- 
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation);
-+
- #endif /* _KOBJECT_H_ */
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -688,6 +688,43 @@ int add_uevent_var(struct kobj_uevent_en
- EXPORT_SYMBOL_GPL(add_uevent_var);
- 
- #if defined(CONFIG_NET)
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	struct uevent_sock *ue_sk;
-+	int err = 0;
-+
-+	/* send netlink message */
-+	mutex_lock(&uevent_sock_mutex);
-+	list_for_each_entry(ue_sk, &uevent_sock_list, list) {
-+		struct sock *uevent_sock = ue_sk->sk;
-+		struct sk_buff *skb2;
-+
-+		skb2 = skb_clone(skb, allocation);
-+		if (!skb2)
-+			break;
-+
-+		err = netlink_broadcast(uevent_sock, skb2, pid, group,
-+					allocation);
-+		if (err)
-+			break;
-+	}
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	kfree_skb(skb);
-+	return err;
-+}
-+#else
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	kfree_skb(skb);
-+	return 0;
-+}
-+#endif
-+EXPORT_SYMBOL_GPL(broadcast_uevent);
-+
-+#if defined(CONFIG_NET)
- static int uevent_net_broadcast(struct sock *usk, struct sk_buff *skb,
- 				struct netlink_ext_ack *extack)
- {
diff --git a/target/linux/generic/hack-4.19/921-always-create-console-node-in-initramfs.patch b/target/linux/generic/hack-4.19/921-always-create-console-node-in-initramfs.patch
deleted file mode 100644
index e437579050..0000000000
--- a/target/linux/generic/hack-4.19/921-always-create-console-node-in-initramfs.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 5d301596fdc72f6cb672f72eb3c66e7cddefb103 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:26:02 +0200
-Subject: initramfs: always create console node
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- usr/gen_initramfs_list.sh | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/usr/gen_initramfs_list.sh
-+++ b/usr/gen_initramfs_list.sh
-@@ -59,6 +59,18 @@ default_initramfs() {
- 	EOF
- }
- 
-+list_openwrt_initramfs() {
-+	:
-+}
-+
-+openwrt_initramfs() {
-+	# make sure that /dev/console exists
-+	cat <<-EOF >> ${output}
-+		dir /dev 0755 0 0
-+		nod /dev/console 0600 0 0 c 5 1
-+	EOF
-+}
-+
- filetype() {
- 	local argv1="$1"
- 
-@@ -180,6 +192,8 @@ dir_filelist() {
- 	if [  "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then
- 		${dep_list}print_mtime "$1"
- 
-+		${dep_list}openwrt_initramfs
-+
- 		echo "${dirlist}" | \
- 		while read x; do
- 			${dep_list}parse ${x}
diff --git a/target/linux/generic/hack-4.19/930-crashlog.patch b/target/linux/generic/hack-4.19/930-crashlog.patch
deleted file mode 100644
index 890c72b640..0000000000
--- a/target/linux/generic/hack-4.19/930-crashlog.patch
+++ /dev/null
@@ -1,338 +0,0 @@
-From 6b1ab74a9917012d0c559edc4ed299d9228ac89f Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:26:47 +0200
-Subject: kernel: add the new 'crashlog' feature
-
-this tries to store kernel oops/panic logs in a fixed location in RAM to
-recover them available to user space using debugfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/crashlog.h |  17 ++++
- init/Kconfig             |   4 +
- kernel/Makefile          |   1 +
- kernel/crashlog.c        | 213 +++++++++++++++++++++++++++++++++++++++++++++++
- kernel/module.c          |   3 +
- mm/bootmem.c             |   2 +
- mm/memblock.c            |   5 ++
- 7 files changed, 245 insertions(+)
- create mode 100644 include/linux/crashlog.h
- create mode 100644 kernel/crashlog.c
-
---- /dev/null
-+++ b/include/linux/crashlog.h
-@@ -0,0 +1,17 @@
-+#ifndef __CRASHLOG_H
-+#define __CRASHLOG_H
-+
-+#ifdef CONFIG_CRASHLOG
-+void crashlog_init_bootmem(struct bootmem_data *bdata);
-+void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size);
-+#else
-+static inline void crashlog_init_bootmem(struct bootmem_data *bdata)
-+{
-+}
-+
-+static inline void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
-+{
-+}
-+#endif
-+
-+#endif
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1049,6 +1049,10 @@ config RELAY
- 
- 	  If unsure, say N.
- 
-+config CRASHLOG
-+	bool "Crash logging"
-+	depends on (!NO_BOOTMEM || HAVE_MEMBLOCK)
-+
- config BLK_DEV_INITRD
- 	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
- 	help
---- a/kernel/Makefile
-+++ b/kernel/Makefile
-@@ -116,6 +116,7 @@ obj-$(CONFIG_TORTURE_TEST) += torture.o
- obj-$(CONFIG_HAS_IOMEM) += iomem.o
- obj-$(CONFIG_ZONE_DEVICE) += memremap.o
- obj-$(CONFIG_RSEQ) += rseq.o
-+obj-$(CONFIG_CRASHLOG) += crashlog.o
- 
- $(obj)/configs.o: $(obj)/config_data.h
- 
---- /dev/null
-+++ b/kernel/crashlog.c
-@@ -0,0 +1,213 @@
-+/*
-+ * Crash information logger
-+ * Copyright (C) 2010 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * Based on ramoops.c
-+ *   Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/bootmem.h>
-+#include <linux/memblock.h>
-+#include <linux/debugfs.h>
-+#include <linux/crashlog.h>
-+#include <linux/kmsg_dump.h>
-+#include <linux/module.h>
-+#include <linux/pfn.h>
-+#include <linux/vmalloc.h>
-+#include <asm/io.h>
-+
-+#define CRASHLOG_PAGES	4
-+#define CRASHLOG_SIZE	(CRASHLOG_PAGES * PAGE_SIZE)
-+#define CRASHLOG_MAGIC	0xa1eedead
-+
-+/*
-+ * Start the log at 1M before the end of RAM, as some boot loaders like
-+ * to use the end of the RAM for stack usage and other things
-+ * If this fails, fall back to using the last part.
-+ */
-+#define CRASHLOG_OFFSET	(1024 * 1024)
-+
-+struct crashlog_data {
-+	u32 magic;
-+	u32 len;
-+	u8 data[];
-+};
-+
-+static struct debugfs_blob_wrapper crashlog_blob;
-+static unsigned long crashlog_addr = 0;
-+static struct crashlog_data *crashlog_buf;
-+static struct kmsg_dumper dump;
-+static bool first = true;
-+
-+extern struct list_head *crashlog_modules;
-+
-+static bool crashlog_set_addr(phys_addr_t addr, phys_addr_t size)
-+{
-+	/* Limit to lower 64 MB to avoid highmem */
-+	phys_addr_t limit = 64 * 1024 * 1024;
-+
-+	if (crashlog_addr)
-+		return false;
-+
-+	if (addr > limit)
-+		return false;
-+
-+	if (addr + size > limit)
-+		size = limit - addr;
-+
-+	crashlog_addr = addr;
-+
-+	if (addr + size > CRASHLOG_OFFSET)
-+		crashlog_addr += size - CRASHLOG_OFFSET;
-+
-+	return true;
-+}
-+
-+#ifndef CONFIG_NO_BOOTMEM
-+void __init crashlog_init_bootmem(bootmem_data_t *bdata)
-+{
-+	phys_addr_t start, end;
-+
-+	start = PFN_PHYS(bdata->node_low_pfn);
-+	end = PFN_PHYS(bdata->node_min_pfn);
-+	if (!crashlog_set_addr(start, end - start))
-+		return;
-+
-+	if (reserve_bootmem(crashlog_addr, CRASHLOG_SIZE, BOOTMEM_EXCLUSIVE) < 0) {
-+		printk("Crashlog failed to allocate RAM at address 0x%lx\n",
-+		       crashlog_addr);
-+		crashlog_addr = 0;
-+	}
-+}
-+#endif
-+
-+#ifdef CONFIG_HAVE_MEMBLOCK
-+void __init_memblock crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
-+{
-+	if (!crashlog_set_addr(addr, size))
-+		return;
-+
-+	if (memblock_reserve(crashlog_addr, CRASHLOG_SIZE)) {
-+		printk("Crashlog failed to allocate RAM at address 0x%lx\n",
-+		       crashlog_addr);
-+		crashlog_addr = 0;
-+	}
-+}
-+#endif
-+
-+static void __init crashlog_copy(void)
-+{
-+	if (crashlog_buf->magic != CRASHLOG_MAGIC)
-+		return;
-+
-+	if (!crashlog_buf->len || crashlog_buf->len >
-+	    CRASHLOG_SIZE - sizeof(*crashlog_buf))
-+		return;
-+
-+	crashlog_blob.size = crashlog_buf->len;
-+	crashlog_blob.data = kmemdup(crashlog_buf->data,
-+		crashlog_buf->len, GFP_KERNEL);
-+
-+	debugfs_create_blob("crashlog", 0700, NULL, &crashlog_blob);
-+}
-+
-+static int get_maxlen(void)
-+{
-+	return CRASHLOG_SIZE - sizeof(*crashlog_buf) - crashlog_buf->len;
-+}
-+
-+static void crashlog_printf(const char *fmt, ...)
-+{
-+	va_list args;
-+	int len = get_maxlen();
-+
-+	if (!len)
-+		return;
-+
-+	va_start(args, fmt);
-+	crashlog_buf->len += vscnprintf(
-+		&crashlog_buf->data[crashlog_buf->len],
-+		len, fmt, args);
-+	va_end(args);
-+}
-+
-+static void crashlog_do_dump(struct kmsg_dumper *dumper,
-+		enum kmsg_dump_reason reason)
-+{
-+	struct timeval tv;
-+	struct module *m;
-+	char *buf;
-+	size_t len;
-+
-+	if (!first)
-+		crashlog_printf("\n===================================\n");
-+
-+	do_gettimeofday(&tv);
-+	crashlog_printf("Time: %lu.%lu\n",
-+		(long)tv.tv_sec, (long)tv.tv_usec);
-+
-+	if (first) {
-+		crashlog_printf("Modules:");
-+		list_for_each_entry(m, crashlog_modules, list) {
-+			crashlog_printf("\t%s@%p+%x", m->name,
-+			m->core_layout.base, m->core_layout.size,
-+			m->init_layout.base, m->init_layout.size);
-+		}
-+		crashlog_printf("\n");
-+		first = false;
-+	}
-+
-+	buf = (char *)&crashlog_buf->data[crashlog_buf->len];
-+
-+	kmsg_dump_get_buffer(dumper, true, buf, get_maxlen(), &len);
-+
-+	crashlog_buf->len += len;
-+}
-+
-+
-+int __init crashlog_init_fs(void)
-+{
-+	struct page *pages[CRASHLOG_PAGES];
-+	pgprot_t prot;
-+	int i;
-+
-+	if (!crashlog_addr) {
-+		printk("No memory allocated for crashlog\n");
-+		return -ENOMEM;
-+	}
-+
-+	printk("Crashlog allocated RAM at address 0x%lx\n", (unsigned long) crashlog_addr);
-+	for (i = 0; i < CRASHLOG_PAGES; i++)
-+		pages[i] = pfn_to_page((crashlog_addr >> PAGE_SHIFT) + i);
-+
-+	prot = pgprot_writecombine(PAGE_KERNEL);
-+	crashlog_buf = vmap(pages, CRASHLOG_PAGES, VM_MAP, prot);
-+
-+	crashlog_copy();
-+
-+	crashlog_buf->magic = CRASHLOG_MAGIC;
-+	crashlog_buf->len = 0;
-+
-+	dump.max_reason = KMSG_DUMP_OOPS;
-+	dump.dump = crashlog_do_dump;
-+	kmsg_dump_register(&dump);
-+
-+	return 0;
-+}
-+module_init(crashlog_init_fs);
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -256,6 +256,9 @@ static void mod_update_bounds(struct mod
- #ifdef CONFIG_KGDB_KDB
- struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
- #endif /* CONFIG_KGDB_KDB */
-+#ifdef CONFIG_CRASHLOG
-+struct list_head *crashlog_modules = &modules;
-+#endif
- 
- static void module_assert_mutex(void)
- {
---- a/mm/bootmem.c
-+++ b/mm/bootmem.c
-@@ -15,6 +15,7 @@
- #include <linux/export.h>
- #include <linux/kmemleak.h>
- #include <linux/range.h>
-+#include <linux/crashlog.h>
- #include <linux/bug.h>
- #include <linux/io.h>
- #include <linux/bootmem.h>
-@@ -215,6 +216,7 @@ static unsigned long __init free_all_boo
- 	if (!bdata->node_bootmem_map)
- 		return 0;
- 
-+	crashlog_init_bootmem(bdata);
- 	map = bdata->node_bootmem_map;
- 	start = bdata->node_min_pfn;
- 	end = bdata->node_low_pfn;
---- a/mm/memblock.c
-+++ b/mm/memblock.c
-@@ -21,6 +21,7 @@
- #include <linux/seq_file.h>
- #include <linux/memblock.h>
- #include <linux/bootmem.h>
-+#include <linux/crashlog.h>
- 
- #include <asm/sections.h>
- #include <linux/io.h>
-@@ -547,6 +548,8 @@ static void __init_memblock memblock_ins
- 	memblock_set_region_node(rgn, nid);
- 	type->cnt++;
- 	type->total_size += size;
-+	if (type == &memblock.memory)
-+		crashlog_init_memblock(base, size);
- }
- 
- /**
-@@ -586,6 +589,8 @@ int __init_memblock memblock_add_range(s
- 		type->regions[0].flags = flags;
- 		memblock_set_region_node(&type->regions[0], nid);
- 		type->total_size = size;
-+		if (type == &memblock.memory)
-+			crashlog_init_memblock(base, size);
- 		return 0;
- 	}
- repeat:
diff --git a/target/linux/generic/hack-4.19/940-cleanup-offload-hooks-on-netdev-unregister.patch b/target/linux/generic/hack-4.19/940-cleanup-offload-hooks-on-netdev-unregister.patch
deleted file mode 100644
index 6db6112b79..0000000000
--- a/target/linux/generic/hack-4.19/940-cleanup-offload-hooks-on-netdev-unregister.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From ae56e27e30122f82d244f9eb35fcab8fa60e0d31 Mon Sep 17 00:00:00 2001
-From: Chen Minqiang <ptpt52@gmail.com>
-Date: Sun, 29 Apr 2018 14:08:57 +0800
-Subject: [PATCH] cleanup offload hooks on netdev unregister
-
-This should fix crashdump on reboot when FLOWOFFLOAD enabled
-
-kmsg:
-[   84.188081] Workqueue: events_power_efficient xt_flowoffload_hook_work [xt_FLOWOFFLOAD]
-[   84.209326] task: ffff88000ecd0c80 task.stack: ffffc90000068000
-[   84.224706] RIP: 0010:__nf_unregister_net_hook+0x1/0x90
-[   84.242911] RSP: 0018:ffffc9000006be30 EFLAGS: 00010202
-[   84.257405] RAX: 0000000000000000 RBX: ffff88000c5b3228 RCX: 0000000100170001
-[   84.292175] RDX: ffff88000ecd0c80 RSI: ffff88000c5b3228 RDI: 6b6b6b6b6b6b6b6b
-[   84.305095] RBP: ffffc9000006be58 R08: ffff88000c5b3578 R09: ffff88000c5b3538
-[   84.325980] R10: ffffc9000006be50 R11: ffff88000fc1f310 R12: ffffffff81e6c580
-[   84.396514] R13: ffff88000d1723d0 R14: ffff88000ec0fc00 R15: 0000000000000000
-[   84.459500] FS:  0000000000000000(0000) GS:ffff88000fc00000(0000) knlGS:0000000000000000
-[   84.525121] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
-[   84.565460] CR2: 0000000000a931d8 CR3: 0000000001e08006 CR4: 00000000000606f0
-[   84.638311] Call Trace:
-[   84.655229]  ? nf_unregister_net_hook+0x88/0xd0
-[   84.706898]  xt_flowoffload_hook_work+0x12a/0x17a [xt_FLOWOFFLOAD]
-[   84.765504]  process_one_work+0x1c4/0x310
-[   84.799558]  worker_thread+0x20b/0x3c0
-[   84.850119]  kthread+0x112/0x120
-[   84.884839]  ? process_one_work+0x310/0x310
-[   84.923571]  ? kthread_create_on_node+0x40/0x40
-[   84.966100]  ret_from_fork+0x35/0x40
-[   84.981738] Code: 41 5c 41 5d 41 5e 41 5f 5d c3 48 8b 05 c1 f1 99 00 55 48 89 e5 48 85 c0 75 02 0f 0b e8 b9 f6 30 00 5d c3 0f 1f 80 00 00 00 00 55 <0f> b7 0f 48 89 e5 48 89 c8 48 c1 e0 04 48 8d 54 07 08 31 c0 eb
-[   85.100453] RIP: __nf_unregister_net_hook+0x1/0x90 RSP: ffffc9000006be30
-[   85.111658] ---[ end trace 5c25a390045cac75 ]---
-[   85.124535] Kernel panic - not syncing: Fatal exception
-
-Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
----
- net/netfilter/xt_FLOWOFFLOAD.c | 32 ++++++++++++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
---- a/net/netfilter/xt_FLOWOFFLOAD.c
-+++ b/net/netfilter/xt_FLOWOFFLOAD.c
-@@ -338,10 +338,41 @@ static void xt_flowoffload_table_cleanup
- 	nf_flow_table_free(table);
- }
- 
-+static int flow_offload_netdev_event(struct notifier_block *this,
-+				     unsigned long event, void *ptr)
-+{
-+	struct xt_flowoffload_hook *hook = NULL;
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+	if (event != NETDEV_UNREGISTER)
-+		return NOTIFY_DONE;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hook = flow_offload_lookup_hook(dev);
-+	if (hook) {
-+		hlist_del(&hook->list);
-+	}
-+	spin_unlock_bh(&hooks_lock);
-+	if (hook) {
-+		nf_unregister_net_hook(hook->net, &hook->ops);
-+		kfree(hook);
-+	}
-+
-+	nf_flow_table_cleanup(dev_net(dev), dev);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+	.notifier_call	= flow_offload_netdev_event,
-+};
-+
- static int __init xt_flowoffload_tg_init(void)
- {
- 	int ret;
- 
-+	register_netdevice_notifier(&flow_offload_netdev_notifier);
-+
- 	INIT_DELAYED_WORK(&hook_work, xt_flowoffload_hook_work);
- 
- 	ret = xt_flowoffload_table_init(&nf_flowtable);
-@@ -359,6 +390,7 @@ static void __exit xt_flowoffload_tg_exi
- {
- 	xt_unregister_target(&offload_tg_reg);
- 	xt_flowoffload_table_cleanup(&nf_flowtable);
-+	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
- }
- 
- MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/hack-4.9/204-module_strip.patch b/target/linux/generic/hack-4.9/204-module_strip.patch
deleted file mode 100644
index fcca6bd02c..0000000000
--- a/target/linux/generic/hack-4.9/204-module_strip.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From a779a482fb9b9f8fcdf8b2519c789b4b9bb5dd05 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:56:48 +0200
-Subject: build: add a hack for removing non-essential module info
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/module.h      | 13 ++++++++-----
- include/linux/moduleparam.h | 15 ++++++++++++---
- init/Kconfig                |  7 +++++++
- kernel/module.c             |  5 ++++-
- scripts/mod/modpost.c       | 12 ++++++++++++
- 5 files changed, 43 insertions(+), 9 deletions(-)
-
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -159,6 +159,7 @@ extern void cleanup_module(void);
- 
- /* Generic info of form tag = "info" */
- #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
-+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
- 
- /* For userspace: you can also call me... */
- #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
-@@ -202,12 +203,12 @@ extern void cleanup_module(void);
-  * Author(s), use "Name <email>" or just "Name", for multiple
-  * authors use multiple MODULE_AUTHOR() statements/lines.
-  */
--#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
-+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
- 
- /* What your module does. */
--#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
- 
--#ifdef MODULE
-+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
- /* Creates an alias so file2alias.c can find device table. */
- #define MODULE_DEVICE_TABLE(type, name)					\
- extern const typeof(name) __mod_##type##__##name##_device_table		\
-@@ -234,7 +235,9 @@ extern const typeof(name) __mod_##type##
-  */
- 
- #if defined(MODULE) || !defined(CONFIG_SYSFS)
--#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
-+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
-+#elif defined(CONFIG_MODULE_STRIPPED)
-+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
- #else
- #define MODULE_VERSION(_version)					\
- 	static struct module_version_attribute ___modver_attr = {	\
-@@ -256,7 +259,7 @@ extern const typeof(name) __mod_##type##
- /* Optional firmware file (or files) needed by the module
-  * format is simply firmware file name.  Multiple firmware
-  * files require multiple MODULE_FIRMWARE() specifiers */
--#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
-+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
- 
- struct notifier_block;
- 
---- a/include/linux/moduleparam.h
-+++ b/include/linux/moduleparam.h
-@@ -16,6 +16,16 @@
- /* Chosen so that structs with an unsigned long line up. */
- #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
- 
-+/* This struct is here for syntactic coherency, it is not used */
-+#define __MODULE_INFO_DISABLED(name)					  \
-+  struct __UNIQUE_ID(name) {}
-+
-+#ifdef CONFIG_MODULE_STRIPPED
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
-+#else
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
-+#endif
-+
- #ifdef MODULE
- #define __MODULE_INFO(tag, name, info)					  \
- static const char __UNIQUE_ID(name)[]					  \
-@@ -23,8 +33,7 @@ static const char __UNIQUE_ID(name)[]
-   = __stringify(tag) "=" info
- #else  /* !MODULE */
- /* This struct is here for syntactic coherency, it is not used */
--#define __MODULE_INFO(tag, name, info)					  \
--  struct __UNIQUE_ID(name) {}
-+#define __MODULE_INFO(tag, name, info) __MODULE_INFO_DISABLED(name)
- #endif
- #define __MODULE_PARM_TYPE(name, _type)					  \
-   __MODULE_INFO(parmtype, name##type, #name ":" _type)
-@@ -32,7 +41,7 @@ static const char __UNIQUE_ID(name)[]
- /* One for each parameter, describing how to use it.  Some files do
-    multiple of these per line, so can't just use MODULE_INFO. */
- #define MODULE_PARM_DESC(_parm, desc) \
--	__MODULE_INFO(parm, _parm, #_parm ":" desc)
-+	__MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
- 
- struct kernel_param;
- 
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -2122,6 +2122,13 @@ config TRIM_UNUSED_KSYMS
- 
- 	  If unsure, or if you need to build out-of-tree modules, say N.
- 
-+config MODULE_STRIPPED
-+	bool "Reduce module size"
-+	depends on MODULES
-+	help
-+	  Remove module parameter descriptions, author info, version, aliases,
-+	  device tables, etc.
-+
- endif # MODULES
- 
- config MODULES_TREE_LOOKUP
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -2968,9 +2968,11 @@ static struct module *setup_load_info(st
- 
- static int check_modinfo(struct module *mod, struct load_info *info, int flags)
- {
--	const char *modmagic = get_modinfo(info, "vermagic");
- 	int err;
- 
-+#ifndef CONFIG_MODULE_STRIPPED
-+	const char *modmagic = get_modinfo(info, "vermagic");
-+
- 	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
- 		modmagic = NULL;
- 
-@@ -2991,6 +2993,7 @@ static int check_modinfo(struct module *
- 				mod->name);
- 		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
- 	}
-+#endif
- 
- 	check_modinfo_retpoline(mod, info);
- 
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -1967,7 +1967,9 @@ static void read_symbols(char *modname)
- 		symname = remove_dot(info.strtab + sym->st_name);
- 
- 		handle_modversions(mod, &info, sym, symname);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		handle_moddevtable(mod, &info, sym, symname);
-+#endif
- 	}
- 	if (!is_vmlinux(modname) ||
- 	     (is_vmlinux(modname) && vmlinux_section_warnings))
-@@ -2111,7 +2113,9 @@ static void add_header(struct buffer *b,
- 	buf_printf(b, "#include <linux/vermagic.h>\n");
- 	buf_printf(b, "#include <linux/compiler.h>\n");
- 	buf_printf(b, "\n");
-+#ifndef CONFIG_MODULE_STRIPPED
- 	buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
-+#endif
- 	buf_printf(b, "\n");
- 	buf_printf(b, "__visible struct module __this_module\n");
- 	buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
-@@ -2128,24 +2132,30 @@ static void add_header(struct buffer *b,
- 
- static void add_intree_flag(struct buffer *b, int is_intree)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (is_intree)
- 		buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
-+#endif
- }
- 
- /* Cannot check for assembler */
- static void add_retpoline(struct buffer *b)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	buf_printf(b, "\n#ifdef RETPOLINE\n");
- 	buf_printf(b, "MODULE_INFO(retpoline, \"Y\");\n");
- 	buf_printf(b, "#endif\n");
-+#endif
- }
- 
- static void add_staging_flag(struct buffer *b, const char *name)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	static const char *staging_dir = "drivers/staging";
- 
- 	if (strncmp(staging_dir, name, strlen(staging_dir)) == 0)
- 		buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
-+#endif
- }
- 
- /* In kernel, this size is defined in linux/module.h;
-@@ -2249,11 +2259,13 @@ static void add_depends(struct buffer *b
- 
- static void add_srcversion(struct buffer *b, struct module *mod)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (mod->srcversion[0]) {
- 		buf_printf(b, "\n");
- 		buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
- 			   mod->srcversion);
- 	}
-+#endif
- }
- 
- static void write_if_changed(struct buffer *b, const char *fname)
-@@ -2488,7 +2500,9 @@ int main(int argc, char **argv)
- 		add_staging_flag(&buf, mod->name);
- 		err |= add_versions(&buf, mod);
- 		add_depends(&buf, mod, modules);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		add_moddevtable(&buf, mod);
-+#endif
- 		add_srcversion(&buf, mod);
- 
- 		sprintf(fname, "%s.mod.c", mod->name);
diff --git a/target/linux/generic/hack-4.9/207-disable-modorder.patch b/target/linux/generic/hack-4.9/207-disable-modorder.patch
deleted file mode 100644
index e92f4fa0bf..0000000000
--- a/target/linux/generic/hack-4.9/207-disable-modorder.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From c9ef4ab0f54356ee9f91d9676ea0ec123840ddc7 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:57:33 +0200
-Subject: kernel: do not build modules.order
-
-It is not needed for anything on the system and skipping this saves some
-build time, especially in cases where there is nothing to do.
-
-lede-commit: afc1675833a7bf5df094f59f7250369520646d04
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile               | 2 --
- scripts/Makefile.build | 2 +-
- 2 files changed, 1 insertion(+), 3 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -1226,7 +1226,6 @@ all: modules
- 
- PHONY += modules
- modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
--	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
- 	@$(kecho) '  Building modules, stage 2.';
- 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
- 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
-@@ -1256,7 +1255,6 @@ _modinst_:
- 		rm -f $(MODLIB)/build ; \
- 		ln -s $(CURDIR) $(MODLIB)/build ; \
- 	fi
--	@cp -f $(objtree)/modules.order $(MODLIB)/
- 	@cp -f $(objtree)/modules.builtin $(MODLIB)/
- 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
- 
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -93,7 +93,7 @@ modorder-target := $(obj)/modules.order
- # We keep a list of all modules in $(MODVERDIR)
- 
- __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
--	 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
-+	 $(if $(KBUILD_MODULES),$(obj-m)) \
- 	 $(subdir-ym) $(always)
- 	@:
- 
diff --git a/target/linux/generic/hack-4.9/210-darwin_scripts_include.patch b/target/linux/generic/hack-4.9/210-darwin_scripts_include.patch
deleted file mode 100644
index bdf4114aaa..0000000000
--- a/target/linux/generic/hack-4.9/210-darwin_scripts_include.patch
+++ /dev/null
@@ -1,3065 +0,0 @@
-From db7c30dcd9a0391bf13b62c9f91e144d762ef43a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 7 Jul 2017 17:00:49 +0200
-Subject: Add an OSX specific patch to make the kernel be compiled
-
-lede-commit: 3fc2a24f0422b2f55f9ed43f116db3111f700526
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- scripts/kconfig/Makefile   |    3 +
- scripts/mod/elf.h          | 3007 ++++++++++++++++++++++++++++++++++++++++++++
- scripts/mod/mk_elfconfig.c |    4 +
- scripts/mod/modpost.h      |    4 +
- 4 files changed, 3018 insertions(+)
- create mode 100644 scripts/mod/elf.h
-
---- a/scripts/kconfig/Makefile
-+++ b/scripts/kconfig/Makefile
-@@ -163,6 +163,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
- # we really need to do so. (Do not call gcc as part of make mrproper)
- HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-                     -DLOCALE
-+ifeq ($(shell uname -s),Darwin)
-+HOST_LOADLIBES  += -lncurses
-+endif
- 
- # ===========================================================================
- # Shared Makefile for the various kconfig executables:
---- /dev/null
-+++ b/scripts/mod/elf.h
-@@ -0,0 +1,3007 @@
-+/* This file defines standard ELF types, structures, and macros.
-+   Copyright (C) 1995-2012 Free Software Foundation, Inc.
-+   This file is part of the GNU C Library.
-+
-+   The GNU C Library is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU Lesser General Public
-+   License as published by the Free Software Foundation; either
-+   version 2.1 of the License, or (at your option) any later version.
-+
-+   The GNU C Library is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+   Lesser General Public License for more details.
-+
-+   You should have received a copy of the GNU Lesser General Public
-+   License along with the GNU C Library; if not, see
-+   <http://www.gnu.org/licenses/>.  */
-+
-+#ifndef _ELF_H
-+#define	_ELF_H 1
-+
-+/* Standard ELF types.  */
-+
-+#include <stdint.h>
-+
-+/* Type for a 16-bit quantity.  */
-+typedef uint16_t Elf32_Half;
-+typedef uint16_t Elf64_Half;
-+
-+/* Types for signed and unsigned 32-bit quantities.  */
-+typedef uint32_t Elf32_Word;
-+typedef	int32_t  Elf32_Sword;
-+typedef uint32_t Elf64_Word;
-+typedef	int32_t  Elf64_Sword;
-+
-+/* Types for signed and unsigned 64-bit quantities.  */
-+typedef uint64_t Elf32_Xword;
-+typedef	int64_t  Elf32_Sxword;
-+typedef uint64_t Elf64_Xword;
-+typedef	int64_t  Elf64_Sxword;
-+
-+/* Type of addresses.  */
-+typedef uint32_t Elf32_Addr;
-+typedef uint64_t Elf64_Addr;
-+
-+/* Type of file offsets.  */
-+typedef uint32_t Elf32_Off;
-+typedef uint64_t Elf64_Off;
-+
-+/* Type for section indices, which are 16-bit quantities.  */
-+typedef uint16_t Elf32_Section;
-+typedef uint16_t Elf64_Section;
-+
-+/* Type for version symbol information.  */
-+typedef Elf32_Half Elf32_Versym;
-+typedef Elf64_Half Elf64_Versym;
-+
-+
-+/* The ELF file header.  This appears at the start of every ELF file.  */
-+
-+#define EI_NIDENT (16)
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf32_Half	e_type;			/* Object file type */
-+  Elf32_Half	e_machine;		/* Architecture */
-+  Elf32_Word	e_version;		/* Object file version */
-+  Elf32_Addr	e_entry;		/* Entry point virtual address */
-+  Elf32_Off	e_phoff;		/* Program header table file offset */
-+  Elf32_Off	e_shoff;		/* Section header table file offset */
-+  Elf32_Word	e_flags;		/* Processor-specific flags */
-+  Elf32_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf32_Half	e_phentsize;		/* Program header table entry size */
-+  Elf32_Half	e_phnum;		/* Program header table entry count */
-+  Elf32_Half	e_shentsize;		/* Section header table entry size */
-+  Elf32_Half	e_shnum;		/* Section header table entry count */
-+  Elf32_Half	e_shstrndx;		/* Section header string table index */
-+} Elf32_Ehdr;
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf64_Half	e_type;			/* Object file type */
-+  Elf64_Half	e_machine;		/* Architecture */
-+  Elf64_Word	e_version;		/* Object file version */
-+  Elf64_Addr	e_entry;		/* Entry point virtual address */
-+  Elf64_Off	e_phoff;		/* Program header table file offset */
-+  Elf64_Off	e_shoff;		/* Section header table file offset */
-+  Elf64_Word	e_flags;		/* Processor-specific flags */
-+  Elf64_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf64_Half	e_phentsize;		/* Program header table entry size */
-+  Elf64_Half	e_phnum;		/* Program header table entry count */
-+  Elf64_Half	e_shentsize;		/* Section header table entry size */
-+  Elf64_Half	e_shnum;		/* Section header table entry count */
-+  Elf64_Half	e_shstrndx;		/* Section header string table index */
-+} Elf64_Ehdr;
-+
-+/* Fields in the e_ident array.  The EI_* macros are indices into the
-+   array.  The macros under each EI_* macro are the values the byte
-+   may have.  */
-+
-+#define EI_MAG0		0		/* File identification byte 0 index */
-+#define ELFMAG0		0x7f		/* Magic number byte 0 */
-+
-+#define EI_MAG1		1		/* File identification byte 1 index */
-+#define ELFMAG1		'E'		/* Magic number byte 1 */
-+
-+#define EI_MAG2		2		/* File identification byte 2 index */
-+#define ELFMAG2		'L'		/* Magic number byte 2 */
-+
-+#define EI_MAG3		3		/* File identification byte 3 index */
-+#define ELFMAG3		'F'		/* Magic number byte 3 */
-+
-+/* Conglomeration of the identification bytes, for easy testing as a word.  */
-+#define	ELFMAG		"\177ELF"
-+#define	SELFMAG		4
-+
-+#define EI_CLASS	4		/* File class byte index */
-+#define ELFCLASSNONE	0		/* Invalid class */
-+#define ELFCLASS32	1		/* 32-bit objects */
-+#define ELFCLASS64	2		/* 64-bit objects */
-+#define ELFCLASSNUM	3
-+
-+#define EI_DATA		5		/* Data encoding byte index */
-+#define ELFDATANONE	0		/* Invalid data encoding */
-+#define ELFDATA2LSB	1		/* 2's complement, little endian */
-+#define ELFDATA2MSB	2		/* 2's complement, big endian */
-+#define ELFDATANUM	3
-+
-+#define EI_VERSION	6		/* File version byte index */
-+					/* Value must be EV_CURRENT */
-+
-+#define EI_OSABI	7		/* OS ABI identification */
-+#define ELFOSABI_NONE		0	/* UNIX System V ABI */
-+#define ELFOSABI_SYSV		0	/* Alias.  */
-+#define ELFOSABI_HPUX		1	/* HP-UX */
-+#define ELFOSABI_NETBSD		2	/* NetBSD.  */
-+#define ELFOSABI_GNU		3	/* Object uses GNU ELF extensions.  */
-+#define ELFOSABI_LINUX		ELFOSABI_GNU /* Compatibility alias.  */
-+#define ELFOSABI_SOLARIS	6	/* Sun Solaris.  */
-+#define ELFOSABI_AIX		7	/* IBM AIX.  */
-+#define ELFOSABI_IRIX		8	/* SGI Irix.  */
-+#define ELFOSABI_FREEBSD	9	/* FreeBSD.  */
-+#define ELFOSABI_TRU64		10	/* Compaq TRU64 UNIX.  */
-+#define ELFOSABI_MODESTO	11	/* Novell Modesto.  */
-+#define ELFOSABI_OPENBSD	12	/* OpenBSD.  */
-+#define ELFOSABI_ARM_AEABI	64	/* ARM EABI */
-+#define ELFOSABI_ARM		97	/* ARM */
-+#define ELFOSABI_STANDALONE	255	/* Standalone (embedded) application */
-+
-+#define EI_ABIVERSION	8		/* ABI version */
-+
-+#define EI_PAD		9		/* Byte index of padding bytes */
-+
-+/* Legal values for e_type (object file type).  */
-+
-+#define ET_NONE		0		/* No file type */
-+#define ET_REL		1		/* Relocatable file */
-+#define ET_EXEC		2		/* Executable file */
-+#define ET_DYN		3		/* Shared object file */
-+#define ET_CORE		4		/* Core file */
-+#define	ET_NUM		5		/* Number of defined types */
-+#define ET_LOOS		0xfe00		/* OS-specific range start */
-+#define ET_HIOS		0xfeff		/* OS-specific range end */
-+#define ET_LOPROC	0xff00		/* Processor-specific range start */
-+#define ET_HIPROC	0xffff		/* Processor-specific range end */
-+
-+/* Legal values for e_machine (architecture).  */
-+
-+#define EM_NONE		 0		/* No machine */
-+#define EM_M32		 1		/* AT&T WE 32100 */
-+#define EM_SPARC	 2		/* SUN SPARC */
-+#define EM_386		 3		/* Intel 80386 */
-+#define EM_68K		 4		/* Motorola m68k family */
-+#define EM_88K		 5		/* Motorola m88k family */
-+#define EM_860		 7		/* Intel 80860 */
-+#define EM_MIPS		 8		/* MIPS R3000 big-endian */
-+#define EM_S370		 9		/* IBM System/370 */
-+#define EM_MIPS_RS3_LE	10		/* MIPS R3000 little-endian */
-+
-+#define EM_PARISC	15		/* HPPA */
-+#define EM_VPP500	17		/* Fujitsu VPP500 */
-+#define EM_SPARC32PLUS	18		/* Sun's "v8plus" */
-+#define EM_960		19		/* Intel 80960 */
-+#define EM_PPC		20		/* PowerPC */
-+#define EM_PPC64	21		/* PowerPC 64-bit */
-+#define EM_S390		22		/* IBM S390 */
-+
-+#define EM_V800		36		/* NEC V800 series */
-+#define EM_FR20		37		/* Fujitsu FR20 */
-+#define EM_RH32		38		/* TRW RH-32 */
-+#define EM_RCE		39		/* Motorola RCE */
-+#define EM_ARM		40		/* ARM */
-+#define EM_FAKE_ALPHA	41		/* Digital Alpha */
-+#define EM_SH		42		/* Hitachi SH */
-+#define EM_SPARCV9	43		/* SPARC v9 64-bit */
-+#define EM_TRICORE	44		/* Siemens Tricore */
-+#define EM_ARC		45		/* Argonaut RISC Core */
-+#define EM_H8_300	46		/* Hitachi H8/300 */
-+#define EM_H8_300H	47		/* Hitachi H8/300H */
-+#define EM_H8S		48		/* Hitachi H8S */
-+#define EM_H8_500	49		/* Hitachi H8/500 */
-+#define EM_IA_64	50		/* Intel Merced */
-+#define EM_MIPS_X	51		/* Stanford MIPS-X */
-+#define EM_COLDFIRE	52		/* Motorola Coldfire */
-+#define EM_68HC12	53		/* Motorola M68HC12 */
-+#define EM_MMA		54		/* Fujitsu MMA Multimedia Accelerator*/
-+#define EM_PCP		55		/* Siemens PCP */
-+#define EM_NCPU		56		/* Sony nCPU embeeded RISC */
-+#define EM_NDR1		57		/* Denso NDR1 microprocessor */
-+#define EM_STARCORE	58		/* Motorola Start*Core processor */
-+#define EM_ME16		59		/* Toyota ME16 processor */
-+#define EM_ST100	60		/* STMicroelectronic ST100 processor */
-+#define EM_TINYJ	61		/* Advanced Logic Corp. Tinyj emb.fam*/
-+#define EM_X86_64	62		/* AMD x86-64 architecture */
-+#define EM_PDSP		63		/* Sony DSP Processor */
-+
-+#define EM_FX66		66		/* Siemens FX66 microcontroller */
-+#define EM_ST9PLUS	67		/* STMicroelectronics ST9+ 8/16 mc */
-+#define EM_ST7		68		/* STmicroelectronics ST7 8 bit mc */
-+#define EM_68HC16	69		/* Motorola MC68HC16 microcontroller */
-+#define EM_68HC11	70		/* Motorola MC68HC11 microcontroller */
-+#define EM_68HC08	71		/* Motorola MC68HC08 microcontroller */
-+#define EM_68HC05	72		/* Motorola MC68HC05 microcontroller */
-+#define EM_SVX		73		/* Silicon Graphics SVx */
-+#define EM_ST19		74		/* STMicroelectronics ST19 8 bit mc */
-+#define EM_VAX		75		/* Digital VAX */
-+#define EM_CRIS		76		/* Axis Communications 32-bit embedded processor */
-+#define EM_JAVELIN	77		/* Infineon Technologies 32-bit embedded processor */
-+#define EM_FIREPATH	78		/* Element 14 64-bit DSP Processor */
-+#define EM_ZSP		79		/* LSI Logic 16-bit DSP Processor */
-+#define EM_MMIX		80		/* Donald Knuth's educational 64-bit processor */
-+#define EM_HUANY	81		/* Harvard University machine-independent object files */
-+#define EM_PRISM	82		/* SiTera Prism */
-+#define EM_AVR		83		/* Atmel AVR 8-bit microcontroller */
-+#define EM_FR30		84		/* Fujitsu FR30 */
-+#define EM_D10V		85		/* Mitsubishi D10V */
-+#define EM_D30V		86		/* Mitsubishi D30V */
-+#define EM_V850		87		/* NEC v850 */
-+#define EM_M32R		88		/* Mitsubishi M32R */
-+#define EM_MN10300	89		/* Matsushita MN10300 */
-+#define EM_MN10200	90		/* Matsushita MN10200 */
-+#define EM_PJ		91		/* picoJava */
-+#define EM_OPENRISC	92		/* OpenRISC 32-bit embedded processor */
-+#define EM_ARC_A5	93		/* ARC Cores Tangent-A5 */
-+#define EM_XTENSA	94		/* Tensilica Xtensa Architecture */
-+#define EM_TILEPRO	188		/* Tilera TILEPro */
-+#define EM_TILEGX	191		/* Tilera TILE-Gx */
-+#define EM_NUM		192
-+
-+/* If it is necessary to assign new unofficial EM_* values, please
-+   pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
-+   chances of collision with official or non-GNU unofficial values.  */
-+
-+#define EM_ALPHA	0x9026
-+
-+/* Legal values for e_version (version).  */
-+
-+#define EV_NONE		0		/* Invalid ELF version */
-+#define EV_CURRENT	1		/* Current version */
-+#define EV_NUM		2
-+
-+/* Section header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf32_Word	sh_type;		/* Section type */
-+  Elf32_Word	sh_flags;		/* Section flags */
-+  Elf32_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf32_Off	sh_offset;		/* Section file offset */
-+  Elf32_Word	sh_size;		/* Section size in bytes */
-+  Elf32_Word	sh_link;		/* Link to another section */
-+  Elf32_Word	sh_info;		/* Additional section information */
-+  Elf32_Word	sh_addralign;		/* Section alignment */
-+  Elf32_Word	sh_entsize;		/* Entry size if section holds table */
-+} Elf32_Shdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf64_Word	sh_type;		/* Section type */
-+  Elf64_Xword	sh_flags;		/* Section flags */
-+  Elf64_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf64_Off	sh_offset;		/* Section file offset */
-+  Elf64_Xword	sh_size;		/* Section size in bytes */
-+  Elf64_Word	sh_link;		/* Link to another section */
-+  Elf64_Word	sh_info;		/* Additional section information */
-+  Elf64_Xword	sh_addralign;		/* Section alignment */
-+  Elf64_Xword	sh_entsize;		/* Entry size if section holds table */
-+} Elf64_Shdr;
-+
-+/* Special section indices.  */
-+
-+#define SHN_UNDEF	0		/* Undefined section */
-+#define SHN_LORESERVE	0xff00		/* Start of reserved indices */
-+#define SHN_LOPROC	0xff00		/* Start of processor-specific */
-+#define SHN_BEFORE	0xff00		/* Order section before all others
-+					   (Solaris).  */
-+#define SHN_AFTER	0xff01		/* Order section after all others
-+					   (Solaris).  */
-+#define SHN_HIPROC	0xff1f		/* End of processor-specific */
-+#define SHN_LOOS	0xff20		/* Start of OS-specific */
-+#define SHN_HIOS	0xff3f		/* End of OS-specific */
-+#define SHN_ABS		0xfff1		/* Associated symbol is absolute */
-+#define SHN_COMMON	0xfff2		/* Associated symbol is common */
-+#define SHN_XINDEX	0xffff		/* Index is in extra table.  */
-+#define SHN_HIRESERVE	0xffff		/* End of reserved indices */
-+
-+/* Legal values for sh_type (section type).  */
-+
-+#define SHT_NULL	  0		/* Section header table entry unused */
-+#define SHT_PROGBITS	  1		/* Program data */
-+#define SHT_SYMTAB	  2		/* Symbol table */
-+#define SHT_STRTAB	  3		/* String table */
-+#define SHT_RELA	  4		/* Relocation entries with addends */
-+#define SHT_HASH	  5		/* Symbol hash table */
-+#define SHT_DYNAMIC	  6		/* Dynamic linking information */
-+#define SHT_NOTE	  7		/* Notes */
-+#define SHT_NOBITS	  8		/* Program space with no data (bss) */
-+#define SHT_REL		  9		/* Relocation entries, no addends */
-+#define SHT_SHLIB	  10		/* Reserved */
-+#define SHT_DYNSYM	  11		/* Dynamic linker symbol table */
-+#define SHT_INIT_ARRAY	  14		/* Array of constructors */
-+#define SHT_FINI_ARRAY	  15		/* Array of destructors */
-+#define SHT_PREINIT_ARRAY 16		/* Array of pre-constructors */
-+#define SHT_GROUP	  17		/* Section group */
-+#define SHT_SYMTAB_SHNDX  18		/* Extended section indeces */
-+#define	SHT_NUM		  19		/* Number of defined types.  */
-+#define SHT_LOOS	  0x60000000	/* Start OS-specific.  */
-+#define SHT_GNU_ATTRIBUTES 0x6ffffff5	/* Object attributes.  */
-+#define SHT_GNU_HASH	  0x6ffffff6	/* GNU-style hash table.  */
-+#define SHT_GNU_LIBLIST	  0x6ffffff7	/* Prelink library list */
-+#define SHT_CHECKSUM	  0x6ffffff8	/* Checksum for DSO content.  */
-+#define SHT_LOSUNW	  0x6ffffffa	/* Sun-specific low bound.  */
-+#define SHT_SUNW_move	  0x6ffffffa
-+#define SHT_SUNW_COMDAT   0x6ffffffb
-+#define SHT_SUNW_syminfo  0x6ffffffc
-+#define SHT_GNU_verdef	  0x6ffffffd	/* Version definition section.  */
-+#define SHT_GNU_verneed	  0x6ffffffe	/* Version needs section.  */
-+#define SHT_GNU_versym	  0x6fffffff	/* Version symbol table.  */
-+#define SHT_HISUNW	  0x6fffffff	/* Sun-specific high bound.  */
-+#define SHT_HIOS	  0x6fffffff	/* End OS-specific type */
-+#define SHT_LOPROC	  0x70000000	/* Start of processor-specific */
-+#define SHT_HIPROC	  0x7fffffff	/* End of processor-specific */
-+#define SHT_LOUSER	  0x80000000	/* Start of application-specific */
-+#define SHT_HIUSER	  0x8fffffff	/* End of application-specific */
-+
-+/* Legal values for sh_flags (section flags).  */
-+
-+#define SHF_WRITE	     (1 << 0)	/* Writable */
-+#define SHF_ALLOC	     (1 << 1)	/* Occupies memory during execution */
-+#define SHF_EXECINSTR	     (1 << 2)	/* Executable */
-+#define SHF_MERGE	     (1 << 4)	/* Might be merged */
-+#define SHF_STRINGS	     (1 << 5)	/* Contains nul-terminated strings */
-+#define SHF_INFO_LINK	     (1 << 6)	/* `sh_info' contains SHT index */
-+#define SHF_LINK_ORDER	     (1 << 7)	/* Preserve order after combining */
-+#define SHF_OS_NONCONFORMING (1 << 8)	/* Non-standard OS specific handling
-+					   required */
-+#define SHF_GROUP	     (1 << 9)	/* Section is member of a group.  */
-+#define SHF_TLS		     (1 << 10)	/* Section hold thread-local data.  */
-+#define SHF_MASKOS	     0x0ff00000	/* OS-specific.  */
-+#define SHF_MASKPROC	     0xf0000000	/* Processor-specific */
-+#define SHF_ORDERED	     (1 << 30)	/* Special ordering requirement
-+					   (Solaris).  */
-+#define SHF_EXCLUDE	     (1 << 31)	/* Section is excluded unless
-+					   referenced or allocated (Solaris).*/
-+
-+/* Section group handling.  */
-+#define GRP_COMDAT	0x1		/* Mark group as COMDAT.  */
-+
-+/* Symbol table entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	st_name;		/* Symbol name (string tbl index) */
-+  Elf32_Addr	st_value;		/* Symbol value */
-+  Elf32_Word	st_size;		/* Symbol size */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char	st_other;		/* Symbol visibility */
-+  Elf32_Section	st_shndx;		/* Section index */
-+} Elf32_Sym;
-+
-+typedef struct
-+{
-+  Elf64_Word	st_name;		/* Symbol name (string tbl index) */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char st_other;		/* Symbol visibility */
-+  Elf64_Section	st_shndx;		/* Section index */
-+  Elf64_Addr	st_value;		/* Symbol value */
-+  Elf64_Xword	st_size;		/* Symbol size */
-+} Elf64_Sym;
-+
-+/* The syminfo section if available contains additional information about
-+   every dynamic symbol.  */
-+
-+typedef struct
-+{
-+  Elf32_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf32_Half si_flags;			/* Per symbol flags */
-+} Elf32_Syminfo;
-+
-+typedef struct
-+{
-+  Elf64_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf64_Half si_flags;			/* Per symbol flags */
-+} Elf64_Syminfo;
-+
-+/* Possible values for si_boundto.  */
-+#define SYMINFO_BT_SELF		0xffff	/* Symbol bound to self */
-+#define SYMINFO_BT_PARENT	0xfffe	/* Symbol bound to parent */
-+#define SYMINFO_BT_LOWRESERVE	0xff00	/* Beginning of reserved entries */
-+
-+/* Possible bitmasks for si_flags.  */
-+#define SYMINFO_FLG_DIRECT	0x0001	/* Direct bound symbol */
-+#define SYMINFO_FLG_PASSTHRU	0x0002	/* Pass-thru symbol for translator */
-+#define SYMINFO_FLG_COPY	0x0004	/* Symbol is a copy-reloc */
-+#define SYMINFO_FLG_LAZYLOAD	0x0008	/* Symbol bound to object to be lazy
-+					   loaded */
-+/* Syminfo version values.  */
-+#define SYMINFO_NONE		0
-+#define SYMINFO_CURRENT		1
-+#define SYMINFO_NUM		2
-+
-+
-+/* How to extract and insert information held in the st_info field.  */
-+
-+#define ELF32_ST_BIND(val)		(((unsigned char) (val)) >> 4)
-+#define ELF32_ST_TYPE(val)		((val) & 0xf)
-+#define ELF32_ST_INFO(bind, type)	(((bind) << 4) + ((type) & 0xf))
-+
-+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field.  */
-+#define ELF64_ST_BIND(val)		ELF32_ST_BIND (val)
-+#define ELF64_ST_TYPE(val)		ELF32_ST_TYPE (val)
-+#define ELF64_ST_INFO(bind, type)	ELF32_ST_INFO ((bind), (type))
-+
-+/* Legal values for ST_BIND subfield of st_info (symbol binding).  */
-+
-+#define STB_LOCAL	0		/* Local symbol */
-+#define STB_GLOBAL	1		/* Global symbol */
-+#define STB_WEAK	2		/* Weak symbol */
-+#define	STB_NUM		3		/* Number of defined types.  */
-+#define STB_LOOS	10		/* Start of OS-specific */
-+#define STB_GNU_UNIQUE	10		/* Unique symbol.  */
-+#define STB_HIOS	12		/* End of OS-specific */
-+#define STB_LOPROC	13		/* Start of processor-specific */
-+#define STB_HIPROC	15		/* End of processor-specific */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_NOTYPE	0		/* Symbol type is unspecified */
-+#define STT_OBJECT	1		/* Symbol is a data object */
-+#define STT_FUNC	2		/* Symbol is a code object */
-+#define STT_SECTION	3		/* Symbol associated with a section */
-+#define STT_FILE	4		/* Symbol's name is file name */
-+#define STT_COMMON	5		/* Symbol is a common data object */
-+#define STT_TLS		6		/* Symbol is thread-local data object*/
-+#define	STT_NUM		7		/* Number of defined types.  */
-+#define STT_LOOS	10		/* Start of OS-specific */
-+#define STT_GNU_IFUNC	10		/* Symbol is indirect code object */
-+#define STT_HIOS	12		/* End of OS-specific */
-+#define STT_LOPROC	13		/* Start of processor-specific */
-+#define STT_HIPROC	15		/* End of processor-specific */
-+
-+
-+/* Symbol table indices are found in the hash buckets and chain table
-+   of a symbol hash table section.  This special index value indicates
-+   the end of a chain, meaning no further symbols are found in that bucket.  */
-+
-+#define STN_UNDEF	0		/* End of a chain.  */
-+
-+
-+/* How to extract and insert information held in the st_other field.  */
-+
-+#define ELF32_ST_VISIBILITY(o)	((o) & 0x03)
-+
-+/* For ELF64 the definitions are the same.  */
-+#define ELF64_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY (o)
-+
-+/* Symbol visibility specification encoded in the st_other field.  */
-+#define STV_DEFAULT	0		/* Default symbol visibility rules */
-+#define STV_INTERNAL	1		/* Processor specific hidden class */
-+#define STV_HIDDEN	2		/* Sym unavailable in other modules */
-+#define STV_PROTECTED	3		/* Not preemptible, not exported */
-+
-+
-+/* Relocation table entry without addend (in section of type SHT_REL).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+} Elf32_Rel;
-+
-+/* I have seen two different definitions of the Elf64_Rel and
-+   Elf64_Rela structures, so we'll leave them out until Novell (or
-+   whoever) gets their act together.  */
-+/* The following, at least, is used on Sparc v9, MIPS, and Alpha.  */
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+} Elf64_Rel;
-+
-+/* Relocation table entry with addend (in section of type SHT_RELA).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+  Elf32_Sword	r_addend;		/* Addend */
-+} Elf32_Rela;
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+  Elf64_Sxword	r_addend;		/* Addend */
-+} Elf64_Rela;
-+
-+/* How to extract and insert information held in the r_info field.  */
-+
-+#define ELF32_R_SYM(val)		((val) >> 8)
-+#define ELF32_R_TYPE(val)		((val) & 0xff)
-+#define ELF32_R_INFO(sym, type)		(((sym) << 8) + ((type) & 0xff))
-+
-+#define ELF64_R_SYM(i)			((i) >> 32)
-+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-+#define ELF64_R_INFO(sym,type)		((((Elf64_Xword) (sym)) << 32) + (type))
-+
-+/* Program segment header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	p_type;			/* Segment type */
-+  Elf32_Off	p_offset;		/* Segment file offset */
-+  Elf32_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf32_Addr	p_paddr;		/* Segment physical address */
-+  Elf32_Word	p_filesz;		/* Segment size in file */
-+  Elf32_Word	p_memsz;		/* Segment size in memory */
-+  Elf32_Word	p_flags;		/* Segment flags */
-+  Elf32_Word	p_align;		/* Segment alignment */
-+} Elf32_Phdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	p_type;			/* Segment type */
-+  Elf64_Word	p_flags;		/* Segment flags */
-+  Elf64_Off	p_offset;		/* Segment file offset */
-+  Elf64_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf64_Addr	p_paddr;		/* Segment physical address */
-+  Elf64_Xword	p_filesz;		/* Segment size in file */
-+  Elf64_Xword	p_memsz;		/* Segment size in memory */
-+  Elf64_Xword	p_align;		/* Segment alignment */
-+} Elf64_Phdr;
-+
-+/* Special value for e_phnum.  This indicates that the real number of
-+   program headers is too large to fit into e_phnum.  Instead the real
-+   value is in the field sh_info of section 0.  */
-+
-+#define PN_XNUM		0xffff
-+
-+/* Legal values for p_type (segment type).  */
-+
-+#define	PT_NULL		0		/* Program header table entry unused */
-+#define PT_LOAD		1		/* Loadable program segment */
-+#define PT_DYNAMIC	2		/* Dynamic linking information */
-+#define PT_INTERP	3		/* Program interpreter */
-+#define PT_NOTE		4		/* Auxiliary information */
-+#define PT_SHLIB	5		/* Reserved */
-+#define PT_PHDR		6		/* Entry for header table itself */
-+#define PT_TLS		7		/* Thread-local storage segment */
-+#define	PT_NUM		8		/* Number of defined types */
-+#define PT_LOOS		0x60000000	/* Start of OS-specific */
-+#define PT_GNU_EH_FRAME	0x6474e550	/* GCC .eh_frame_hdr segment */
-+#define PT_GNU_STACK	0x6474e551	/* Indicates stack executability */
-+#define PT_GNU_RELRO	0x6474e552	/* Read-only after relocation */
-+#define PT_LOSUNW	0x6ffffffa
-+#define PT_SUNWBSS	0x6ffffffa	/* Sun Specific segment */
-+#define PT_SUNWSTACK	0x6ffffffb	/* Stack segment */
-+#define PT_HISUNW	0x6fffffff
-+#define PT_HIOS		0x6fffffff	/* End of OS-specific */
-+#define PT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define PT_HIPROC	0x7fffffff	/* End of processor-specific */
-+
-+/* Legal values for p_flags (segment flags).  */
-+
-+#define PF_X		(1 << 0)	/* Segment is executable */
-+#define PF_W		(1 << 1)	/* Segment is writable */
-+#define PF_R		(1 << 2)	/* Segment is readable */
-+#define PF_MASKOS	0x0ff00000	/* OS-specific */
-+#define PF_MASKPROC	0xf0000000	/* Processor-specific */
-+
-+/* Legal values for note segment descriptor types for core files. */
-+
-+#define NT_PRSTATUS	1		/* Contains copy of prstatus struct */
-+#define NT_FPREGSET	2		/* Contains copy of fpregset struct */
-+#define NT_PRPSINFO	3		/* Contains copy of prpsinfo struct */
-+#define NT_PRXREG	4		/* Contains copy of prxregset struct */
-+#define NT_TASKSTRUCT	4		/* Contains copy of task structure */
-+#define NT_PLATFORM	5		/* String from sysinfo(SI_PLATFORM) */
-+#define NT_AUXV		6		/* Contains copy of auxv array */
-+#define NT_GWINDOWS	7		/* Contains copy of gwindows struct */
-+#define NT_ASRS		8		/* Contains copy of asrset struct */
-+#define NT_PSTATUS	10		/* Contains copy of pstatus struct */
-+#define NT_PSINFO	13		/* Contains copy of psinfo struct */
-+#define NT_PRCRED	14		/* Contains copy of prcred struct */
-+#define NT_UTSNAME	15		/* Contains copy of utsname struct */
-+#define NT_LWPSTATUS	16		/* Contains copy of lwpstatus struct */
-+#define NT_LWPSINFO	17		/* Contains copy of lwpinfo struct */
-+#define NT_PRFPXREG	20		/* Contains copy of fprxregset struct */
-+#define NT_PRXFPREG	0x46e62b7f	/* Contains copy of user_fxsr_struct */
-+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-+
-+/* Legal values for the note segment descriptor types for object files.  */
-+
-+#define NT_VERSION	1		/* Contains a version string.  */
-+
-+
-+/* Dynamic section entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Sword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf32_Word d_val;			/* Integer value */
-+      Elf32_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf32_Dyn;
-+
-+typedef struct
-+{
-+  Elf64_Sxword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf64_Xword d_val;		/* Integer value */
-+      Elf64_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf64_Dyn;
-+
-+/* Legal values for d_tag (dynamic entry type).  */
-+
-+#define DT_NULL		0		/* Marks end of dynamic section */
-+#define DT_NEEDED	1		/* Name of needed library */
-+#define DT_PLTRELSZ	2		/* Size in bytes of PLT relocs */
-+#define DT_PLTGOT	3		/* Processor defined value */
-+#define DT_HASH		4		/* Address of symbol hash table */
-+#define DT_STRTAB	5		/* Address of string table */
-+#define DT_SYMTAB	6		/* Address of symbol table */
-+#define DT_RELA		7		/* Address of Rela relocs */
-+#define DT_RELASZ	8		/* Total size of Rela relocs */
-+#define DT_RELAENT	9		/* Size of one Rela reloc */
-+#define DT_STRSZ	10		/* Size of string table */
-+#define DT_SYMENT	11		/* Size of one symbol table entry */
-+#define DT_INIT		12		/* Address of init function */
-+#define DT_FINI		13		/* Address of termination function */
-+#define DT_SONAME	14		/* Name of shared object */
-+#define DT_RPATH	15		/* Library search path (deprecated) */
-+#define DT_SYMBOLIC	16		/* Start symbol search here */
-+#define DT_REL		17		/* Address of Rel relocs */
-+#define DT_RELSZ	18		/* Total size of Rel relocs */
-+#define DT_RELENT	19		/* Size of one Rel reloc */
-+#define DT_PLTREL	20		/* Type of reloc in PLT */
-+#define DT_DEBUG	21		/* For debugging; unspecified */
-+#define DT_TEXTREL	22		/* Reloc might modify .text */
-+#define DT_JMPREL	23		/* Address of PLT relocs */
-+#define	DT_BIND_NOW	24		/* Process relocations of object */
-+#define	DT_INIT_ARRAY	25		/* Array with addresses of init fct */
-+#define	DT_FINI_ARRAY	26		/* Array with addresses of fini fct */
-+#define	DT_INIT_ARRAYSZ	27		/* Size in bytes of DT_INIT_ARRAY */
-+#define	DT_FINI_ARRAYSZ	28		/* Size in bytes of DT_FINI_ARRAY */
-+#define DT_RUNPATH	29		/* Library search path */
-+#define DT_FLAGS	30		/* Flags for the object being loaded */
-+#define DT_ENCODING	32		/* Start of encoded range */
-+#define DT_PREINIT_ARRAY 32		/* Array with addresses of preinit fct*/
-+#define DT_PREINIT_ARRAYSZ 33		/* size in bytes of DT_PREINIT_ARRAY */
-+#define	DT_NUM		34		/* Number used */
-+#define DT_LOOS		0x6000000d	/* Start of OS-specific */
-+#define DT_HIOS		0x6ffff000	/* End of OS-specific */
-+#define DT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define DT_HIPROC	0x7fffffff	/* End of processor-specific */
-+#define	DT_PROCNUM	DT_MIPS_NUM	/* Most used by any processor */
-+
-+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
-+   Dyn.d_un.d_val field of the Elf*_Dyn structure.  This follows Sun's
-+   approach.  */
-+#define DT_VALRNGLO	0x6ffffd00
-+#define DT_GNU_PRELINKED 0x6ffffdf5	/* Prelinking timestamp */
-+#define DT_GNU_CONFLICTSZ 0x6ffffdf6	/* Size of conflict section */
-+#define DT_GNU_LIBLISTSZ 0x6ffffdf7	/* Size of library list */
-+#define DT_CHECKSUM	0x6ffffdf8
-+#define DT_PLTPADSZ	0x6ffffdf9
-+#define DT_MOVEENT	0x6ffffdfa
-+#define DT_MOVESZ	0x6ffffdfb
-+#define DT_FEATURE_1	0x6ffffdfc	/* Feature selection (DTF_*).  */
-+#define DT_POSFLAG_1	0x6ffffdfd	/* Flags for DT_* entries, effecting
-+					   the following DT_* entry.  */
-+#define DT_SYMINSZ	0x6ffffdfe	/* Size of syminfo table (in bytes) */
-+#define DT_SYMINENT	0x6ffffdff	/* Entry size of syminfo */
-+#define DT_VALRNGHI	0x6ffffdff
-+#define DT_VALTAGIDX(tag)	(DT_VALRNGHI - (tag))	/* Reverse order! */
-+#define DT_VALNUM 12
-+
-+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
-+   Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
-+
-+   If any adjustment is made to the ELF object after it has been
-+   built these entries will need to be adjusted.  */
-+#define DT_ADDRRNGLO	0x6ffffe00
-+#define DT_GNU_HASH	0x6ffffef5	/* GNU-style hash table.  */
-+#define DT_TLSDESC_PLT	0x6ffffef6
-+#define DT_TLSDESC_GOT	0x6ffffef7
-+#define DT_GNU_CONFLICT	0x6ffffef8	/* Start of conflict section */
-+#define DT_GNU_LIBLIST	0x6ffffef9	/* Library list */
-+#define DT_CONFIG	0x6ffffefa	/* Configuration information.  */
-+#define DT_DEPAUDIT	0x6ffffefb	/* Dependency auditing.  */
-+#define DT_AUDIT	0x6ffffefc	/* Object auditing.  */
-+#define	DT_PLTPAD	0x6ffffefd	/* PLT padding.  */
-+#define	DT_MOVETAB	0x6ffffefe	/* Move table.  */
-+#define DT_SYMINFO	0x6ffffeff	/* Syminfo table.  */
-+#define DT_ADDRRNGHI	0x6ffffeff
-+#define DT_ADDRTAGIDX(tag)	(DT_ADDRRNGHI - (tag))	/* Reverse order! */
-+#define DT_ADDRNUM 11
-+
-+/* The versioning entry types.  The next are defined as part of the
-+   GNU extension.  */
-+#define DT_VERSYM	0x6ffffff0
-+
-+#define DT_RELACOUNT	0x6ffffff9
-+#define DT_RELCOUNT	0x6ffffffa
-+
-+/* These were chosen by Sun.  */
-+#define DT_FLAGS_1	0x6ffffffb	/* State flags, see DF_1_* below.  */
-+#define	DT_VERDEF	0x6ffffffc	/* Address of version definition
-+					   table */
-+#define	DT_VERDEFNUM	0x6ffffffd	/* Number of version definitions */
-+#define	DT_VERNEED	0x6ffffffe	/* Address of table with needed
-+					   versions */
-+#define	DT_VERNEEDNUM	0x6fffffff	/* Number of needed versions */
-+#define DT_VERSIONTAGIDX(tag)	(DT_VERNEEDNUM - (tag))	/* Reverse order! */
-+#define DT_VERSIONTAGNUM 16
-+
-+/* Sun added these machine-independent extensions in the "processor-specific"
-+   range.  Be compatible.  */
-+#define DT_AUXILIARY    0x7ffffffd      /* Shared object to load before self */
-+#define DT_FILTER       0x7fffffff      /* Shared object to get values from */
-+#define DT_EXTRATAGIDX(tag)	((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
-+#define DT_EXTRANUM	3
-+
-+/* Values of `d_un.d_val' in the DT_FLAGS entry.  */
-+#define DF_ORIGIN	0x00000001	/* Object may use DF_ORIGIN */
-+#define DF_SYMBOLIC	0x00000002	/* Symbol resolutions starts here */
-+#define DF_TEXTREL	0x00000004	/* Object contains text relocations */
-+#define DF_BIND_NOW	0x00000008	/* No lazy binding for this object */
-+#define DF_STATIC_TLS	0x00000010	/* Module uses the static TLS model */
-+
-+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
-+   entry in the dynamic section.  */
-+#define DF_1_NOW	0x00000001	/* Set RTLD_NOW for this object.  */
-+#define DF_1_GLOBAL	0x00000002	/* Set RTLD_GLOBAL for this object.  */
-+#define DF_1_GROUP	0x00000004	/* Set RTLD_GROUP for this object.  */
-+#define DF_1_NODELETE	0x00000008	/* Set RTLD_NODELETE for this object.*/
-+#define DF_1_LOADFLTR	0x00000010	/* Trigger filtee loading at runtime.*/
-+#define DF_1_INITFIRST	0x00000020	/* Set RTLD_INITFIRST for this object*/
-+#define DF_1_NOOPEN	0x00000040	/* Set RTLD_NOOPEN for this object.  */
-+#define DF_1_ORIGIN	0x00000080	/* $ORIGIN must be handled.  */
-+#define DF_1_DIRECT	0x00000100	/* Direct binding enabled.  */
-+#define DF_1_TRANS	0x00000200
-+#define DF_1_INTERPOSE	0x00000400	/* Object is used to interpose.  */
-+#define DF_1_NODEFLIB	0x00000800	/* Ignore default lib search path.  */
-+#define DF_1_NODUMP	0x00001000	/* Object can't be dldump'ed.  */
-+#define DF_1_CONFALT	0x00002000	/* Configuration alternative created.*/
-+#define DF_1_ENDFILTEE	0x00004000	/* Filtee terminates filters search. */
-+#define	DF_1_DISPRELDNE	0x00008000	/* Disp reloc applied at build time. */
-+#define	DF_1_DISPRELPND	0x00010000	/* Disp reloc applied at run-time.  */
-+
-+/* Flags for the feature selection in DT_FEATURE_1.  */
-+#define DTF_1_PARINIT	0x00000001
-+#define DTF_1_CONFEXP	0x00000002
-+
-+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry.  */
-+#define DF_P1_LAZYLOAD	0x00000001	/* Lazyload following object.  */
-+#define DF_P1_GROUPPERM	0x00000002	/* Symbols from next object are not
-+					   generally available.  */
-+
-+/* Version definition sections.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vd_version;		/* Version revision */
-+  Elf32_Half	vd_flags;		/* Version information */
-+  Elf32_Half	vd_ndx;			/* Version Index */
-+  Elf32_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vd_hash;		/* Version name hash value */
-+  Elf32_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf32_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf32_Verdef;
-+
-+typedef struct
-+{
-+  Elf64_Half	vd_version;		/* Version revision */
-+  Elf64_Half	vd_flags;		/* Version information */
-+  Elf64_Half	vd_ndx;			/* Version Index */
-+  Elf64_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vd_hash;		/* Version name hash value */
-+  Elf64_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf64_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf64_Verdef;
-+
-+
-+/* Legal values for vd_version (version revision).  */
-+#define VER_DEF_NONE	0		/* No version */
-+#define VER_DEF_CURRENT	1		/* Current version */
-+#define VER_DEF_NUM	2		/* Given version number */
-+
-+/* Legal values for vd_flags (version information flags).  */
-+#define VER_FLG_BASE	0x1		/* Version definition of file itself */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+/* Versym symbol index values.  */
-+#define	VER_NDX_LOCAL		0	/* Symbol is local.  */
-+#define	VER_NDX_GLOBAL		1	/* Symbol is global.  */
-+#define	VER_NDX_LORESERVE	0xff00	/* Beginning of reserved entries.  */
-+#define	VER_NDX_ELIMINATE	0xff01	/* Symbol is to be eliminated.  */
-+
-+/* Auxialiary version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vda_name;		/* Version or dependency names */
-+  Elf32_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf32_Verdaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vda_name;		/* Version or dependency names */
-+  Elf64_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf64_Verdaux;
-+
-+
-+/* Version dependency section.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vn_version;		/* Version of structure */
-+  Elf32_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf32_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf32_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf32_Verneed;
-+
-+typedef struct
-+{
-+  Elf64_Half	vn_version;		/* Version of structure */
-+  Elf64_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf64_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf64_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf64_Verneed;
-+
-+
-+/* Legal values for vn_version (version revision).  */
-+#define VER_NEED_NONE	 0		/* No version */
-+#define VER_NEED_CURRENT 1		/* Current version */
-+#define VER_NEED_NUM	 2		/* Given version number */
-+
-+/* Auxiliary needed version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf32_Half	vna_flags;		/* Dependency specific information */
-+  Elf32_Half	vna_other;		/* Unused */
-+  Elf32_Word	vna_name;		/* Dependency name string offset */
-+  Elf32_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf32_Vernaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf64_Half	vna_flags;		/* Dependency specific information */
-+  Elf64_Half	vna_other;		/* Unused */
-+  Elf64_Word	vna_name;		/* Dependency name string offset */
-+  Elf64_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf64_Vernaux;
-+
-+
-+/* Legal values for vna_flags.  */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+
-+/* Auxiliary vector.  */
-+
-+/* This vector is normally only used by the program interpreter.  The
-+   usual definition in an ABI supplement uses the name auxv_t.  The
-+   vector is not usually defined in a standard <elf.h> file, but it
-+   can't hurt.  We rename it to avoid conflicts.  The sizes of these
-+   types are an arrangement between the exec server and the program
-+   interpreter, so we don't fully specify them here.  */
-+
-+typedef struct
-+{
-+  uint32_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint32_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf32_auxv_t;
-+
-+typedef struct
-+{
-+  uint64_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint64_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf64_auxv_t;
-+
-+/* Legal values for a_type (entry type).  */
-+
-+#define AT_NULL		0		/* End of vector */
-+#define AT_IGNORE	1		/* Entry should be ignored */
-+#define AT_EXECFD	2		/* File descriptor of program */
-+#define AT_PHDR		3		/* Program headers for program */
-+#define AT_PHENT	4		/* Size of program header entry */
-+#define AT_PHNUM	5		/* Number of program headers */
-+#define AT_PAGESZ	6		/* System page size */
-+#define AT_BASE		7		/* Base address of interpreter */
-+#define AT_FLAGS	8		/* Flags */
-+#define AT_ENTRY	9		/* Entry point of program */
-+#define AT_NOTELF	10		/* Program is not ELF */
-+#define AT_UID		11		/* Real uid */
-+#define AT_EUID		12		/* Effective uid */
-+#define AT_GID		13		/* Real gid */
-+#define AT_EGID		14		/* Effective gid */
-+#define AT_CLKTCK	17		/* Frequency of times() */
-+
-+/* Some more special a_type values describing the hardware.  */
-+#define AT_PLATFORM	15		/* String identifying platform.  */
-+#define AT_HWCAP	16		/* Machine dependent hints about
-+					   processor capabilities.  */
-+
-+/* This entry gives some information about the FPU initialization
-+   performed by the kernel.  */
-+#define AT_FPUCW	18		/* Used FPU control word.  */
-+
-+/* Cache block sizes.  */
-+#define AT_DCACHEBSIZE	19		/* Data cache block size.  */
-+#define AT_ICACHEBSIZE	20		/* Instruction cache block size.  */
-+#define AT_UCACHEBSIZE	21		/* Unified cache block size.  */
-+
-+/* A special ignored value for PPC, used by the kernel to control the
-+   interpretation of the AUXV. Must be > 16.  */
-+#define AT_IGNOREPPC	22		/* Entry should be ignored.  */
-+
-+#define	AT_SECURE	23		/* Boolean, was exec setuid-like?  */
-+
-+#define AT_BASE_PLATFORM 24		/* String identifying real platforms.*/
-+
-+#define AT_RANDOM	25		/* Address of 16 random bytes.  */
-+
-+#define AT_EXECFN	31		/* Filename of executable.  */
-+
-+/* Pointer to the global system page used for system calls and other
-+   nice things.  */
-+#define AT_SYSINFO	32
-+#define AT_SYSINFO_EHDR	33
-+
-+/* Shapes of the caches.  Bits 0-3 contains associativity; bits 4-7 contains
-+   log2 of line size; mask those to get cache size.  */
-+#define AT_L1I_CACHESHAPE	34
-+#define AT_L1D_CACHESHAPE	35
-+#define AT_L2_CACHESHAPE	36
-+#define AT_L3_CACHESHAPE	37
-+
-+/* Note section contents.  Each entry in the note section begins with
-+   a header of a fixed form.  */
-+
-+typedef struct
-+{
-+  Elf32_Word n_namesz;			/* Length of the note's name.  */
-+  Elf32_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf32_Word n_type;			/* Type of the note.  */
-+} Elf32_Nhdr;
-+
-+typedef struct
-+{
-+  Elf64_Word n_namesz;			/* Length of the note's name.  */
-+  Elf64_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf64_Word n_type;			/* Type of the note.  */
-+} Elf64_Nhdr;
-+
-+/* Known names of notes.  */
-+
-+/* Solaris entries in the note section have this name.  */
-+#define ELF_NOTE_SOLARIS	"SUNW Solaris"
-+
-+/* Note entries for GNU systems have this name.  */
-+#define ELF_NOTE_GNU		"GNU"
-+
-+
-+/* Defined types of notes for Solaris.  */
-+
-+/* Value of descriptor (one word) is desired pagesize for the binary.  */
-+#define ELF_NOTE_PAGESIZE_HINT	1
-+
-+
-+/* Defined note types for GNU systems.  */
-+
-+/* ABI information.  The descriptor consists of words:
-+   word 0: OS descriptor
-+   word 1: major version of the ABI
-+   word 2: minor version of the ABI
-+   word 3: subminor version of the ABI
-+*/
-+#define NT_GNU_ABI_TAG	1
-+#define ELF_NOTE_ABI	NT_GNU_ABI_TAG /* Old name.  */
-+
-+/* Known OSes.  These values can appear in word 0 of an
-+   NT_GNU_ABI_TAG note section entry.  */
-+#define ELF_NOTE_OS_LINUX	0
-+#define ELF_NOTE_OS_GNU		1
-+#define ELF_NOTE_OS_SOLARIS2	2
-+#define ELF_NOTE_OS_FREEBSD	3
-+
-+/* Synthetic hwcap information.  The descriptor begins with two words:
-+   word 0: number of entries
-+   word 1: bitmask of enabled entries
-+   Then follow variable-length entries, one byte followed by a
-+   '\0'-terminated hwcap name string.  The byte gives the bit
-+   number to test if enabled, (1U << bit) & bitmask.  */
-+#define NT_GNU_HWCAP	2
-+
-+/* Build ID bits as generated by ld --build-id.
-+   The descriptor consists of any nonzero number of bytes.  */
-+#define NT_GNU_BUILD_ID	3
-+
-+/* Version note generated by GNU gold containing a version string.  */
-+#define NT_GNU_GOLD_VERSION	4
-+
-+
-+/* Move records.  */
-+typedef struct
-+{
-+  Elf32_Xword m_value;		/* Symbol value.  */
-+  Elf32_Word m_info;		/* Size and index.  */
-+  Elf32_Word m_poffset;		/* Symbol offset.  */
-+  Elf32_Half m_repeat;		/* Repeat count.  */
-+  Elf32_Half m_stride;		/* Stride info.  */
-+} Elf32_Move;
-+
-+typedef struct
-+{
-+  Elf64_Xword m_value;		/* Symbol value.  */
-+  Elf64_Xword m_info;		/* Size and index.  */
-+  Elf64_Xword m_poffset;	/* Symbol offset.  */
-+  Elf64_Half m_repeat;		/* Repeat count.  */
-+  Elf64_Half m_stride;		/* Stride info.  */
-+} Elf64_Move;
-+
-+/* Macro to construct move records.  */
-+#define ELF32_M_SYM(info)	((info) >> 8)
-+#define ELF32_M_SIZE(info)	((unsigned char) (info))
-+#define ELF32_M_INFO(sym, size)	(((sym) << 8) + (unsigned char) (size))
-+
-+#define ELF64_M_SYM(info)	ELF32_M_SYM (info)
-+#define ELF64_M_SIZE(info)	ELF32_M_SIZE (info)
-+#define ELF64_M_INFO(sym, size)	ELF32_M_INFO (sym, size)
-+
-+
-+/* Motorola 68k specific definitions.  */
-+
-+/* Values for Elf32_Ehdr.e_flags.  */
-+#define EF_CPU32	0x00810000
-+
-+/* m68k relocs.  */
-+
-+#define R_68K_NONE	0		/* No reloc */
-+#define R_68K_32	1		/* Direct 32 bit  */
-+#define R_68K_16	2		/* Direct 16 bit  */
-+#define R_68K_8		3		/* Direct 8 bit  */
-+#define R_68K_PC32	4		/* PC relative 32 bit */
-+#define R_68K_PC16	5		/* PC relative 16 bit */
-+#define R_68K_PC8	6		/* PC relative 8 bit */
-+#define R_68K_GOT32	7		/* 32 bit PC relative GOT entry */
-+#define R_68K_GOT16	8		/* 16 bit PC relative GOT entry */
-+#define R_68K_GOT8	9		/* 8 bit PC relative GOT entry */
-+#define R_68K_GOT32O	10		/* 32 bit GOT offset */
-+#define R_68K_GOT16O	11		/* 16 bit GOT offset */
-+#define R_68K_GOT8O	12		/* 8 bit GOT offset */
-+#define R_68K_PLT32	13		/* 32 bit PC relative PLT address */
-+#define R_68K_PLT16	14		/* 16 bit PC relative PLT address */
-+#define R_68K_PLT8	15		/* 8 bit PC relative PLT address */
-+#define R_68K_PLT32O	16		/* 32 bit PLT offset */
-+#define R_68K_PLT16O	17		/* 16 bit PLT offset */
-+#define R_68K_PLT8O	18		/* 8 bit PLT offset */
-+#define R_68K_COPY	19		/* Copy symbol at runtime */
-+#define R_68K_GLOB_DAT	20		/* Create GOT entry */
-+#define R_68K_JMP_SLOT	21		/* Create PLT entry */
-+#define R_68K_RELATIVE	22		/* Adjust by program base */
-+#define R_68K_TLS_GD32      25          /* 32 bit GOT offset for GD */
-+#define R_68K_TLS_GD16      26          /* 16 bit GOT offset for GD */
-+#define R_68K_TLS_GD8       27          /* 8 bit GOT offset for GD */
-+#define R_68K_TLS_LDM32     28          /* 32 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM16     29          /* 16 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM8      30          /* 8 bit GOT offset for LDM */
-+#define R_68K_TLS_LDO32     31          /* 32 bit module-relative offset */
-+#define R_68K_TLS_LDO16     32          /* 16 bit module-relative offset */
-+#define R_68K_TLS_LDO8      33          /* 8 bit module-relative offset */
-+#define R_68K_TLS_IE32      34          /* 32 bit GOT offset for IE */
-+#define R_68K_TLS_IE16      35          /* 16 bit GOT offset for IE */
-+#define R_68K_TLS_IE8       36          /* 8 bit GOT offset for IE */
-+#define R_68K_TLS_LE32      37          /* 32 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE16      38          /* 16 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE8       39          /* 8 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_DTPMOD32  40          /* 32 bit module number */
-+#define R_68K_TLS_DTPREL32  41          /* 32 bit module-relative offset */
-+#define R_68K_TLS_TPREL32   42          /* 32 bit TP-relative offset */
-+/* Keep this the last entry.  */
-+#define R_68K_NUM	43
-+
-+/* Intel 80386 specific definitions.  */
-+
-+/* i386 relocs.  */
-+
-+#define R_386_NONE	   0		/* No reloc */
-+#define R_386_32	   1		/* Direct 32 bit  */
-+#define R_386_PC32	   2		/* PC relative 32 bit */
-+#define R_386_GOT32	   3		/* 32 bit GOT entry */
-+#define R_386_PLT32	   4		/* 32 bit PLT address */
-+#define R_386_COPY	   5		/* Copy symbol at runtime */
-+#define R_386_GLOB_DAT	   6		/* Create GOT entry */
-+#define R_386_JMP_SLOT	   7		/* Create PLT entry */
-+#define R_386_RELATIVE	   8		/* Adjust by program base */
-+#define R_386_GOTOFF	   9		/* 32 bit offset to GOT */
-+#define R_386_GOTPC	   10		/* 32 bit PC relative offset to GOT */
-+#define R_386_32PLT	   11
-+#define R_386_TLS_TPOFF	   14		/* Offset in static TLS block */
-+#define R_386_TLS_IE	   15		/* Address of GOT entry for static TLS
-+					   block offset */
-+#define R_386_TLS_GOTIE	   16		/* GOT entry for static TLS block
-+					   offset */
-+#define R_386_TLS_LE	   17		/* Offset relative to static TLS
-+					   block */
-+#define R_386_TLS_GD	   18		/* Direct 32 bit for GNU version of
-+					   general dynamic thread local data */
-+#define R_386_TLS_LDM	   19		/* Direct 32 bit for GNU version of
-+					   local dynamic thread local data
-+					   in LE code */
-+#define R_386_16	   20
-+#define R_386_PC16	   21
-+#define R_386_8		   22
-+#define R_386_PC8	   23
-+#define R_386_TLS_GD_32	   24		/* Direct 32 bit for general dynamic
-+					   thread local data */
-+#define R_386_TLS_GD_PUSH  25		/* Tag for pushl in GD TLS code */
-+#define R_386_TLS_GD_CALL  26		/* Relocation for call to
-+					   __tls_get_addr() */
-+#define R_386_TLS_GD_POP   27		/* Tag for popl in GD TLS code */
-+#define R_386_TLS_LDM_32   28		/* Direct 32 bit for local dynamic
-+					   thread local data in LE code */
-+#define R_386_TLS_LDM_PUSH 29		/* Tag for pushl in LDM TLS code */
-+#define R_386_TLS_LDM_CALL 30		/* Relocation for call to
-+					   __tls_get_addr() in LDM code */
-+#define R_386_TLS_LDM_POP  31		/* Tag for popl in LDM TLS code */
-+#define R_386_TLS_LDO_32   32		/* Offset relative to TLS block */
-+#define R_386_TLS_IE_32	   33		/* GOT entry for negated static TLS
-+					   block offset */
-+#define R_386_TLS_LE_32	   34		/* Negated offset relative to static
-+					   TLS block */
-+#define R_386_TLS_DTPMOD32 35		/* ID of module containing symbol */
-+#define R_386_TLS_DTPOFF32 36		/* Offset in TLS block */
-+#define R_386_TLS_TPOFF32  37		/* Negated offset in static TLS block */
-+/* 38? */
-+#define R_386_TLS_GOTDESC  39		/* GOT offset for TLS descriptor.  */
-+#define R_386_TLS_DESC_CALL 40		/* Marker of call through TLS
-+					   descriptor for
-+					   relaxation.  */
-+#define R_386_TLS_DESC     41		/* TLS descriptor containing
-+					   pointer to code and to
-+					   argument, returning the TLS
-+					   offset for the symbol.  */
-+#define R_386_IRELATIVE	   42		/* Adjust indirectly by program base */
-+/* Keep this the last entry.  */
-+#define R_386_NUM	   43
-+
-+/* SUN SPARC specific definitions.  */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_SPARC_REGISTER	13	/* Global register reserved to app. */
-+
-+/* Values for Elf64_Ehdr.e_flags.  */
-+
-+#define EF_SPARCV9_MM		3
-+#define EF_SPARCV9_TSO		0
-+#define EF_SPARCV9_PSO		1
-+#define EF_SPARCV9_RMO		2
-+#define EF_SPARC_LEDATA		0x800000 /* little endian data */
-+#define EF_SPARC_EXT_MASK	0xFFFF00
-+#define EF_SPARC_32PLUS		0x000100 /* generic V8+ features */
-+#define EF_SPARC_SUN_US1	0x000200 /* Sun UltraSPARC1 extensions */
-+#define EF_SPARC_HAL_R1		0x000400 /* HAL R1 extensions */
-+#define EF_SPARC_SUN_US3	0x000800 /* Sun UltraSPARCIII extensions */
-+
-+/* SPARC relocs.  */
-+
-+#define R_SPARC_NONE		0	/* No reloc */
-+#define R_SPARC_8		1	/* Direct 8 bit */
-+#define R_SPARC_16		2	/* Direct 16 bit */
-+#define R_SPARC_32		3	/* Direct 32 bit */
-+#define R_SPARC_DISP8		4	/* PC relative 8 bit */
-+#define R_SPARC_DISP16		5	/* PC relative 16 bit */
-+#define R_SPARC_DISP32		6	/* PC relative 32 bit */
-+#define R_SPARC_WDISP30		7	/* PC relative 30 bit shifted */
-+#define R_SPARC_WDISP22		8	/* PC relative 22 bit shifted */
-+#define R_SPARC_HI22		9	/* High 22 bit */
-+#define R_SPARC_22		10	/* Direct 22 bit */
-+#define R_SPARC_13		11	/* Direct 13 bit */
-+#define R_SPARC_LO10		12	/* Truncated 10 bit */
-+#define R_SPARC_GOT10		13	/* Truncated 10 bit GOT entry */
-+#define R_SPARC_GOT13		14	/* 13 bit GOT entry */
-+#define R_SPARC_GOT22		15	/* 22 bit GOT entry shifted */
-+#define R_SPARC_PC10		16	/* PC relative 10 bit truncated */
-+#define R_SPARC_PC22		17	/* PC relative 22 bit shifted */
-+#define R_SPARC_WPLT30		18	/* 30 bit PC relative PLT address */
-+#define R_SPARC_COPY		19	/* Copy symbol at runtime */
-+#define R_SPARC_GLOB_DAT	20	/* Create GOT entry */
-+#define R_SPARC_JMP_SLOT	21	/* Create PLT entry */
-+#define R_SPARC_RELATIVE	22	/* Adjust by program base */
-+#define R_SPARC_UA32		23	/* Direct 32 bit unaligned */
-+
-+/* Additional Sparc64 relocs.  */
-+
-+#define R_SPARC_PLT32		24	/* Direct 32 bit ref to PLT entry */
-+#define R_SPARC_HIPLT22		25	/* High 22 bit PLT entry */
-+#define R_SPARC_LOPLT10		26	/* Truncated 10 bit PLT entry */
-+#define R_SPARC_PCPLT32		27	/* PC rel 32 bit ref to PLT entry */
-+#define R_SPARC_PCPLT22		28	/* PC rel high 22 bit PLT entry */
-+#define R_SPARC_PCPLT10		29	/* PC rel trunc 10 bit PLT entry */
-+#define R_SPARC_10		30	/* Direct 10 bit */
-+#define R_SPARC_11		31	/* Direct 11 bit */
-+#define R_SPARC_64		32	/* Direct 64 bit */
-+#define R_SPARC_OLO10		33	/* 10bit with secondary 13bit addend */
-+#define R_SPARC_HH22		34	/* Top 22 bits of direct 64 bit */
-+#define R_SPARC_HM10		35	/* High middle 10 bits of ... */
-+#define R_SPARC_LM22		36	/* Low middle 22 bits of ... */
-+#define R_SPARC_PC_HH22		37	/* Top 22 bits of pc rel 64 bit */
-+#define R_SPARC_PC_HM10		38	/* High middle 10 bit of ... */
-+#define R_SPARC_PC_LM22		39	/* Low miggle 22 bits of ... */
-+#define R_SPARC_WDISP16		40	/* PC relative 16 bit shifted */
-+#define R_SPARC_WDISP19		41	/* PC relative 19 bit shifted */
-+#define R_SPARC_GLOB_JMP	42	/* was part of v9 ABI but was removed */
-+#define R_SPARC_7		43	/* Direct 7 bit */
-+#define R_SPARC_5		44	/* Direct 5 bit */
-+#define R_SPARC_6		45	/* Direct 6 bit */
-+#define R_SPARC_DISP64		46	/* PC relative 64 bit */
-+#define R_SPARC_PLT64		47	/* Direct 64 bit ref to PLT entry */
-+#define R_SPARC_HIX22		48	/* High 22 bit complemented */
-+#define R_SPARC_LOX10		49	/* Truncated 11 bit complemented */
-+#define R_SPARC_H44		50	/* Direct high 12 of 44 bit */
-+#define R_SPARC_M44		51	/* Direct mid 22 of 44 bit */
-+#define R_SPARC_L44		52	/* Direct low 10 of 44 bit */
-+#define R_SPARC_REGISTER	53	/* Global register usage */
-+#define R_SPARC_UA64		54	/* Direct 64 bit unaligned */
-+#define R_SPARC_UA16		55	/* Direct 16 bit unaligned */
-+#define R_SPARC_TLS_GD_HI22	56
-+#define R_SPARC_TLS_GD_LO10	57
-+#define R_SPARC_TLS_GD_ADD	58
-+#define R_SPARC_TLS_GD_CALL	59
-+#define R_SPARC_TLS_LDM_HI22	60
-+#define R_SPARC_TLS_LDM_LO10	61
-+#define R_SPARC_TLS_LDM_ADD	62
-+#define R_SPARC_TLS_LDM_CALL	63
-+#define R_SPARC_TLS_LDO_HIX22	64
-+#define R_SPARC_TLS_LDO_LOX10	65
-+#define R_SPARC_TLS_LDO_ADD	66
-+#define R_SPARC_TLS_IE_HI22	67
-+#define R_SPARC_TLS_IE_LO10	68
-+#define R_SPARC_TLS_IE_LD	69
-+#define R_SPARC_TLS_IE_LDX	70
-+#define R_SPARC_TLS_IE_ADD	71
-+#define R_SPARC_TLS_LE_HIX22	72
-+#define R_SPARC_TLS_LE_LOX10	73
-+#define R_SPARC_TLS_DTPMOD32	74
-+#define R_SPARC_TLS_DTPMOD64	75
-+#define R_SPARC_TLS_DTPOFF32	76
-+#define R_SPARC_TLS_DTPOFF64	77
-+#define R_SPARC_TLS_TPOFF32	78
-+#define R_SPARC_TLS_TPOFF64	79
-+#define R_SPARC_GOTDATA_HIX22	80
-+#define R_SPARC_GOTDATA_LOX10	81
-+#define R_SPARC_GOTDATA_OP_HIX22	82
-+#define R_SPARC_GOTDATA_OP_LOX10	83
-+#define R_SPARC_GOTDATA_OP	84
-+#define R_SPARC_H34		85
-+#define R_SPARC_SIZE32		86
-+#define R_SPARC_SIZE64		87
-+#define R_SPARC_WDISP10		88
-+#define R_SPARC_JMP_IREL	248
-+#define R_SPARC_IRELATIVE	249
-+#define R_SPARC_GNU_VTINHERIT	250
-+#define R_SPARC_GNU_VTENTRY	251
-+#define R_SPARC_REV32		252
-+/* Keep this the last entry.  */
-+#define R_SPARC_NUM		253
-+
-+/* For Sparc64, legal values for d_tag of Elf64_Dyn.  */
-+
-+#define DT_SPARC_REGISTER 0x70000001
-+#define DT_SPARC_NUM	2
-+
-+/* MIPS R3000 specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_MIPS_NOREORDER   1		/* A .noreorder directive was used */
-+#define EF_MIPS_PIC	    2		/* Contains PIC code */
-+#define EF_MIPS_CPIC	    4		/* Uses PIC calling sequence */
-+#define EF_MIPS_XGOT	    8
-+#define EF_MIPS_64BIT_WHIRL 16
-+#define EF_MIPS_ABI2	    32
-+#define EF_MIPS_ABI_ON32    64
-+#define EF_MIPS_ARCH	    0xf0000000	/* MIPS architecture level */
-+
-+/* Legal values for MIPS architecture level.  */
-+
-+#define EF_MIPS_ARCH_1	    0x00000000	/* -mips1 code.  */
-+#define EF_MIPS_ARCH_2	    0x10000000	/* -mips2 code.  */
-+#define EF_MIPS_ARCH_3	    0x20000000	/* -mips3 code.  */
-+#define EF_MIPS_ARCH_4	    0x30000000	/* -mips4 code.  */
-+#define EF_MIPS_ARCH_5	    0x40000000	/* -mips5 code.  */
-+#define EF_MIPS_ARCH_32	    0x60000000	/* MIPS32 code.  */
-+#define EF_MIPS_ARCH_64	    0x70000000	/* MIPS64 code.  */
-+
-+/* The following are non-official names and should not be used.  */
-+
-+#define E_MIPS_ARCH_1	  0x00000000	/* -mips1 code.  */
-+#define E_MIPS_ARCH_2	  0x10000000	/* -mips2 code.  */
-+#define E_MIPS_ARCH_3	  0x20000000	/* -mips3 code.  */
-+#define E_MIPS_ARCH_4	  0x30000000	/* -mips4 code.  */
-+#define E_MIPS_ARCH_5	  0x40000000	/* -mips5 code.  */
-+#define E_MIPS_ARCH_32	  0x60000000	/* MIPS32 code.  */
-+#define E_MIPS_ARCH_64	  0x70000000	/* MIPS64 code.  */
-+
-+/* Special section indices.  */
-+
-+#define SHN_MIPS_ACOMMON    0xff00	/* Allocated common symbols */
-+#define SHN_MIPS_TEXT	    0xff01	/* Allocated test symbols.  */
-+#define SHN_MIPS_DATA	    0xff02	/* Allocated data symbols.  */
-+#define SHN_MIPS_SCOMMON    0xff03	/* Small common symbols */
-+#define SHN_MIPS_SUNDEFINED 0xff04	/* Small undefined symbols */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_MIPS_LIBLIST       0x70000000 /* Shared objects used in link */
-+#define SHT_MIPS_MSYM	       0x70000001
-+#define SHT_MIPS_CONFLICT      0x70000002 /* Conflicting symbols */
-+#define SHT_MIPS_GPTAB	       0x70000003 /* Global data area sizes */
-+#define SHT_MIPS_UCODE	       0x70000004 /* Reserved for SGI/MIPS compilers */
-+#define SHT_MIPS_DEBUG	       0x70000005 /* MIPS ECOFF debugging information*/
-+#define SHT_MIPS_REGINFO       0x70000006 /* Register usage information */
-+#define SHT_MIPS_PACKAGE       0x70000007
-+#define SHT_MIPS_PACKSYM       0x70000008
-+#define SHT_MIPS_RELD	       0x70000009
-+#define SHT_MIPS_IFACE         0x7000000b
-+#define SHT_MIPS_CONTENT       0x7000000c
-+#define SHT_MIPS_OPTIONS       0x7000000d /* Miscellaneous options.  */
-+#define SHT_MIPS_SHDR	       0x70000010
-+#define SHT_MIPS_FDESC	       0x70000011
-+#define SHT_MIPS_EXTSYM	       0x70000012
-+#define SHT_MIPS_DENSE	       0x70000013
-+#define SHT_MIPS_PDESC	       0x70000014
-+#define SHT_MIPS_LOCSYM	       0x70000015
-+#define SHT_MIPS_AUXSYM	       0x70000016
-+#define SHT_MIPS_OPTSYM	       0x70000017
-+#define SHT_MIPS_LOCSTR	       0x70000018
-+#define SHT_MIPS_LINE	       0x70000019
-+#define SHT_MIPS_RFDESC	       0x7000001a
-+#define SHT_MIPS_DELTASYM      0x7000001b
-+#define SHT_MIPS_DELTAINST     0x7000001c
-+#define SHT_MIPS_DELTACLASS    0x7000001d
-+#define SHT_MIPS_DWARF         0x7000001e /* DWARF debugging information.  */
-+#define SHT_MIPS_DELTADECL     0x7000001f
-+#define SHT_MIPS_SYMBOL_LIB    0x70000020
-+#define SHT_MIPS_EVENTS	       0x70000021 /* Event section.  */
-+#define SHT_MIPS_TRANSLATE     0x70000022
-+#define SHT_MIPS_PIXIE	       0x70000023
-+#define SHT_MIPS_XLATE	       0x70000024
-+#define SHT_MIPS_XLATE_DEBUG   0x70000025
-+#define SHT_MIPS_WHIRL	       0x70000026
-+#define SHT_MIPS_EH_REGION     0x70000027
-+#define SHT_MIPS_XLATE_OLD     0x70000028
-+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_MIPS_GPREL	 0x10000000	/* Must be part of global data area */
-+#define SHF_MIPS_MERGE	 0x20000000
-+#define SHF_MIPS_ADDR	 0x40000000
-+#define SHF_MIPS_STRINGS 0x80000000
-+#define SHF_MIPS_NOSTRIP 0x08000000
-+#define SHF_MIPS_LOCAL	 0x04000000
-+#define SHF_MIPS_NAMES	 0x02000000
-+#define SHF_MIPS_NODUPE	 0x01000000
-+
-+
-+/* Symbol tables.  */
-+
-+/* MIPS specific values for `st_other'.  */
-+#define STO_MIPS_DEFAULT		0x0
-+#define STO_MIPS_INTERNAL		0x1
-+#define STO_MIPS_HIDDEN			0x2
-+#define STO_MIPS_PROTECTED		0x3
-+#define STO_MIPS_PLT			0x8
-+#define STO_MIPS_SC_ALIGN_UNUSED	0xff
-+
-+/* MIPS specific values for `st_info'.  */
-+#define STB_MIPS_SPLIT_COMMON		13
-+
-+/* Entries found in sections of type SHT_MIPS_GPTAB.  */
-+
-+typedef union
-+{
-+  struct
-+    {
-+      Elf32_Word gt_current_g_value;	/* -G value used for compilation */
-+      Elf32_Word gt_unused;		/* Not used */
-+    } gt_header;			/* First entry in section */
-+  struct
-+    {
-+      Elf32_Word gt_g_value;		/* If this value were used for -G */
-+      Elf32_Word gt_bytes;		/* This many bytes would be used */
-+    } gt_entry;				/* Subsequent entries in section */
-+} Elf32_gptab;
-+
-+/* Entry found in sections of type SHT_MIPS_REGINFO.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	ri_gprmask;		/* General registers used */
-+  Elf32_Word	ri_cprmask[4];		/* Coprocessor registers used */
-+  Elf32_Sword	ri_gp_value;		/* $gp register value */
-+} Elf32_RegInfo;
-+
-+/* Entries found in sections of type SHT_MIPS_OPTIONS.  */
-+
-+typedef struct
-+{
-+  unsigned char kind;		/* Determines interpretation of the
-+				   variable part of descriptor.  */
-+  unsigned char size;		/* Size of descriptor, including header.  */
-+  Elf32_Section section;	/* Section header index of section affected,
-+				   0 for global options.  */
-+  Elf32_Word info;		/* Kind-specific information.  */
-+} Elf_Options;
-+
-+/* Values for `kind' field in Elf_Options.  */
-+
-+#define ODK_NULL	0	/* Undefined.  */
-+#define ODK_REGINFO	1	/* Register usage information.  */
-+#define ODK_EXCEPTIONS	2	/* Exception processing options.  */
-+#define ODK_PAD		3	/* Section padding options.  */
-+#define ODK_HWPATCH	4	/* Hardware workarounds performed */
-+#define ODK_FILL	5	/* record the fill value used by the linker. */
-+#define ODK_TAGS	6	/* reserve space for desktop tools to write. */
-+#define ODK_HWAND	7	/* HW workarounds.  'AND' bits when merging. */
-+#define ODK_HWOR	8	/* HW workarounds.  'OR' bits when merging.  */
-+
-+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries.  */
-+
-+#define OEX_FPU_MIN	0x1f	/* FPE's which MUST be enabled.  */
-+#define OEX_FPU_MAX	0x1f00	/* FPE's which MAY be enabled.  */
-+#define OEX_PAGE0	0x10000	/* page zero must be mapped.  */
-+#define OEX_SMM		0x20000	/* Force sequential memory mode?  */
-+#define OEX_FPDBUG	0x40000	/* Force floating point debug mode?  */
-+#define OEX_PRECISEFP	OEX_FPDBUG
-+#define OEX_DISMISS	0x80000	/* Dismiss invalid address faults?  */
-+
-+#define OEX_FPU_INVAL	0x10
-+#define OEX_FPU_DIV0	0x08
-+#define OEX_FPU_OFLO	0x04
-+#define OEX_FPU_UFLO	0x02
-+#define OEX_FPU_INEX	0x01
-+
-+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry.  */
-+
-+#define OHW_R4KEOP	0x1	/* R4000 end-of-page patch.  */
-+#define OHW_R8KPFETCH	0x2	/* may need R8000 prefetch patch.  */
-+#define OHW_R5KEOP	0x4	/* R5000 end-of-page patch.  */
-+#define OHW_R5KCVTL	0x8	/* R5000 cvt.[ds].l bug.  clean=1.  */
-+
-+#define OPAD_PREFIX	0x1
-+#define OPAD_POSTFIX	0x2
-+#define OPAD_SYMBOL	0x4
-+
-+/* Entry found in `.options' section.  */
-+
-+typedef struct
-+{
-+  Elf32_Word hwp_flags1;	/* Extra flags.  */
-+  Elf32_Word hwp_flags2;	/* Extra flags.  */
-+} Elf_Options_Hw;
-+
-+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries.  */
-+
-+#define OHWA0_R4KEOP_CHECKED	0x00000001
-+#define OHWA1_R4KEOP_CLEAN	0x00000002
-+
-+/* MIPS relocs.  */
-+
-+#define R_MIPS_NONE		0	/* No reloc */
-+#define R_MIPS_16		1	/* Direct 16 bit */
-+#define R_MIPS_32		2	/* Direct 32 bit */
-+#define R_MIPS_REL32		3	/* PC relative 32 bit */
-+#define R_MIPS_26		4	/* Direct 26 bit shifted */
-+#define R_MIPS_HI16		5	/* High 16 bit */
-+#define R_MIPS_LO16		6	/* Low 16 bit */
-+#define R_MIPS_GPREL16		7	/* GP relative 16 bit */
-+#define R_MIPS_LITERAL		8	/* 16 bit literal entry */
-+#define R_MIPS_GOT16		9	/* 16 bit GOT entry */
-+#define R_MIPS_PC16		10	/* PC relative 16 bit */
-+#define R_MIPS_CALL16		11	/* 16 bit GOT entry for function */
-+#define R_MIPS_GPREL32		12	/* GP relative 32 bit */
-+
-+#define R_MIPS_SHIFT5		16
-+#define R_MIPS_SHIFT6		17
-+#define R_MIPS_64		18
-+#define R_MIPS_GOT_DISP		19
-+#define R_MIPS_GOT_PAGE		20
-+#define R_MIPS_GOT_OFST		21
-+#define R_MIPS_GOT_HI16		22
-+#define R_MIPS_GOT_LO16		23
-+#define R_MIPS_SUB		24
-+#define R_MIPS_INSERT_A		25
-+#define R_MIPS_INSERT_B		26
-+#define R_MIPS_DELETE		27
-+#define R_MIPS_HIGHER		28
-+#define R_MIPS_HIGHEST		29
-+#define R_MIPS_CALL_HI16	30
-+#define R_MIPS_CALL_LO16	31
-+#define R_MIPS_SCN_DISP		32
-+#define R_MIPS_REL16		33
-+#define R_MIPS_ADD_IMMEDIATE	34
-+#define R_MIPS_PJUMP		35
-+#define R_MIPS_RELGOT		36
-+#define R_MIPS_JALR		37
-+#define R_MIPS_TLS_DTPMOD32	38	/* Module number 32 bit */
-+#define R_MIPS_TLS_DTPREL32	39	/* Module-relative offset 32 bit */
-+#define R_MIPS_TLS_DTPMOD64	40	/* Module number 64 bit */
-+#define R_MIPS_TLS_DTPREL64	41	/* Module-relative offset 64 bit */
-+#define R_MIPS_TLS_GD		42	/* 16 bit GOT offset for GD */
-+#define R_MIPS_TLS_LDM		43	/* 16 bit GOT offset for LDM */
-+#define R_MIPS_TLS_DTPREL_HI16	44	/* Module-relative offset, high 16 bits */
-+#define R_MIPS_TLS_DTPREL_LO16	45	/* Module-relative offset, low 16 bits */
-+#define R_MIPS_TLS_GOTTPREL	46	/* 16 bit GOT offset for IE */
-+#define R_MIPS_TLS_TPREL32	47	/* TP-relative offset, 32 bit */
-+#define R_MIPS_TLS_TPREL64	48	/* TP-relative offset, 64 bit */
-+#define R_MIPS_TLS_TPREL_HI16	49	/* TP-relative offset, high 16 bits */
-+#define R_MIPS_TLS_TPREL_LO16	50	/* TP-relative offset, low 16 bits */
-+#define R_MIPS_GLOB_DAT		51
-+#define R_MIPS_COPY		126
-+#define R_MIPS_JUMP_SLOT        127
-+/* Keep this the last entry.  */
-+#define R_MIPS_NUM		128
-+
-+/* Legal values for p_type field of Elf32_Phdr.  */
-+
-+#define PT_MIPS_REGINFO	0x70000000	/* Register usage information */
-+#define PT_MIPS_RTPROC  0x70000001	/* Runtime procedure table. */
-+#define PT_MIPS_OPTIONS 0x70000002
-+
-+/* Special program header types.  */
-+
-+#define PF_MIPS_LOCAL	0x10000000
-+
-+/* Legal values for d_tag field of Elf32_Dyn.  */
-+
-+#define DT_MIPS_RLD_VERSION  0x70000001	/* Runtime linker interface version */
-+#define DT_MIPS_TIME_STAMP   0x70000002	/* Timestamp */
-+#define DT_MIPS_ICHECKSUM    0x70000003	/* Checksum */
-+#define DT_MIPS_IVERSION     0x70000004	/* Version string (string tbl index) */
-+#define DT_MIPS_FLAGS	     0x70000005	/* Flags */
-+#define DT_MIPS_BASE_ADDRESS 0x70000006	/* Base address */
-+#define DT_MIPS_MSYM	     0x70000007
-+#define DT_MIPS_CONFLICT     0x70000008	/* Address of CONFLICT section */
-+#define DT_MIPS_LIBLIST	     0x70000009	/* Address of LIBLIST section */
-+#define DT_MIPS_LOCAL_GOTNO  0x7000000a	/* Number of local GOT entries */
-+#define DT_MIPS_CONFLICTNO   0x7000000b	/* Number of CONFLICT entries */
-+#define DT_MIPS_LIBLISTNO    0x70000010	/* Number of LIBLIST entries */
-+#define DT_MIPS_SYMTABNO     0x70000011	/* Number of DYNSYM entries */
-+#define DT_MIPS_UNREFEXTNO   0x70000012	/* First external DYNSYM */
-+#define DT_MIPS_GOTSYM	     0x70000013	/* First GOT entry in DYNSYM */
-+#define DT_MIPS_HIPAGENO     0x70000014	/* Number of GOT page table entries */
-+#define DT_MIPS_RLD_MAP	     0x70000016	/* Address of run time loader map.  */
-+#define DT_MIPS_DELTA_CLASS  0x70000017	/* Delta C++ class definition.  */
-+#define DT_MIPS_DELTA_CLASS_NO    0x70000018 /* Number of entries in
-+						DT_MIPS_DELTA_CLASS.  */
-+#define DT_MIPS_DELTA_INSTANCE    0x70000019 /* Delta C++ class instances.  */
-+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
-+						DT_MIPS_DELTA_INSTANCE.  */
-+#define DT_MIPS_DELTA_RELOC  0x7000001b /* Delta relocations.  */
-+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
-+					     DT_MIPS_DELTA_RELOC.  */
-+#define DT_MIPS_DELTA_SYM    0x7000001d /* Delta symbols that Delta
-+					   relocations refer to.  */
-+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
-+					   DT_MIPS_DELTA_SYM.  */
-+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
-+					     class declaration.  */
-+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
-+						DT_MIPS_DELTA_CLASSSYM.  */
-+#define DT_MIPS_CXX_FLAGS    0x70000022 /* Flags indicating for C++ flavor.  */
-+#define DT_MIPS_PIXIE_INIT   0x70000023
-+#define DT_MIPS_SYMBOL_LIB   0x70000024
-+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
-+#define DT_MIPS_LOCAL_GOTIDX 0x70000026
-+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
-+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
-+#define DT_MIPS_OPTIONS	     0x70000029 /* Address of .options.  */
-+#define DT_MIPS_INTERFACE    0x7000002a /* Address of .interface.  */
-+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
-+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
-+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
-+						    function stored in GOT.  */
-+#define DT_MIPS_PERF_SUFFIX  0x7000002e /* Default suffix of dso to be added
-+					   by rld on dlopen() calls.  */
-+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
-+#define DT_MIPS_GP_VALUE     0x70000030 /* GP value for aux GOTs.  */
-+#define DT_MIPS_AUX_DYNAMIC  0x70000031 /* Address of aux .dynamic.  */
-+/* The address of .got.plt in an executable using the new non-PIC ABI.  */
-+#define DT_MIPS_PLTGOT	     0x70000032
-+/* The base of the PLT in an executable using the new non-PIC ABI if that
-+   PLT is writable.  For a non-writable PLT, this is omitted or has a zero
-+   value.  */
-+#define DT_MIPS_RWPLT        0x70000034
-+#define DT_MIPS_NUM	     0x35
-+
-+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry.  */
-+
-+#define RHF_NONE		   0		/* No flags */
-+#define RHF_QUICKSTART		   (1 << 0)	/* Use quickstart */
-+#define RHF_NOTPOT		   (1 << 1)	/* Hash size not power of 2 */
-+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2)	/* Ignore LD_LIBRARY_PATH */
-+#define RHF_NO_MOVE		   (1 << 3)
-+#define RHF_SGI_ONLY		   (1 << 4)
-+#define RHF_GUARANTEE_INIT	   (1 << 5)
-+#define RHF_DELTA_C_PLUS_PLUS	   (1 << 6)
-+#define RHF_GUARANTEE_START_INIT   (1 << 7)
-+#define RHF_PIXIE		   (1 << 8)
-+#define RHF_DEFAULT_DELAY_LOAD	   (1 << 9)
-+#define RHF_REQUICKSTART	   (1 << 10)
-+#define RHF_REQUICKSTARTED	   (1 << 11)
-+#define RHF_CORD		   (1 << 12)
-+#define RHF_NO_UNRES_UNDEF	   (1 << 13)
-+#define RHF_RLD_ORDER_SAFE	   (1 << 14)
-+
-+/* Entries found in sections of type SHT_MIPS_LIBLIST.  */
-+
-+typedef struct
-+{
-+  Elf32_Word l_name;		/* Name (string table index) */
-+  Elf32_Word l_time_stamp;	/* Timestamp */
-+  Elf32_Word l_checksum;	/* Checksum */
-+  Elf32_Word l_version;		/* Interface version */
-+  Elf32_Word l_flags;		/* Flags */
-+} Elf32_Lib;
-+
-+typedef struct
-+{
-+  Elf64_Word l_name;		/* Name (string table index) */
-+  Elf64_Word l_time_stamp;	/* Timestamp */
-+  Elf64_Word l_checksum;	/* Checksum */
-+  Elf64_Word l_version;		/* Interface version */
-+  Elf64_Word l_flags;		/* Flags */
-+} Elf64_Lib;
-+
-+
-+/* Legal values for l_flags.  */
-+
-+#define LL_NONE		  0
-+#define LL_EXACT_MATCH	  (1 << 0)	/* Require exact match */
-+#define LL_IGNORE_INT_VER (1 << 1)	/* Ignore interface version */
-+#define LL_REQUIRE_MINOR  (1 << 2)
-+#define LL_EXPORTS	  (1 << 3)
-+#define LL_DELAY_LOAD	  (1 << 4)
-+#define LL_DELTA	  (1 << 5)
-+
-+/* Entries found in sections of type SHT_MIPS_CONFLICT.  */
-+
-+typedef Elf32_Addr Elf32_Conflict;
-+
-+
-+/* HPPA specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
-+#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
-+#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
-+#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
-+#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
-+					      prediction.  */
-+#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
-+#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
-+
-+/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
-+
-+#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
-+#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
-+#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
-+
-+/* Additional section indeces.  */
-+
-+#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
-+					      symbols in ANSI C.  */
-+#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
-+#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
-+#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
-+#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
-+#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
-+
-+#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
-+#define STT_HP_STUB		(STT_LOOS + 0x2)
-+
-+/* HPPA relocs.  */
-+
-+#define R_PARISC_NONE		0	/* No reloc.  */
-+#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
-+#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
-+#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
-+#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
-+#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
-+#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
-+#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
-+#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
-+#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
-+#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
-+#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
-+#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
-+#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
-+#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
-+#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
-+#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
-+#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
-+#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
-+#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
-+#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
-+#define R_PARISC_PLABEL21L	66	/* Left 21 bits of fdesc address.  */
-+#define R_PARISC_PLABEL14R	70	/* Right 14 bits of fdesc address.  */
-+#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
-+#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
-+#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
-+#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
-+#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
-+#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
-+#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LORESERVE	128
-+#define R_PARISC_COPY		128	/* Copy relocation.  */
-+#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
-+#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
-+#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
-+#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
-+#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
-+#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
-+#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
-+#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_GNU_VTENTRY	232
-+#define R_PARISC_GNU_VTINHERIT	233
-+#define R_PARISC_TLS_GD21L	234	/* GD 21-bit left.  */
-+#define R_PARISC_TLS_GD14R	235	/* GD 14-bit right.  */
-+#define R_PARISC_TLS_GDCALL	236	/* GD call to __t_g_a.  */
-+#define R_PARISC_TLS_LDM21L	237	/* LD module 21-bit left.  */
-+#define R_PARISC_TLS_LDM14R	238	/* LD module 14-bit right.  */
-+#define R_PARISC_TLS_LDMCALL	239	/* LD module call to __t_g_a.  */
-+#define R_PARISC_TLS_LDO21L	240	/* LD offset 21-bit left.  */
-+#define R_PARISC_TLS_LDO14R	241	/* LD offset 14-bit right.  */
-+#define R_PARISC_TLS_DTPMOD32	242	/* DTP module 32-bit.  */
-+#define R_PARISC_TLS_DTPMOD64	243	/* DTP module 64-bit.  */
-+#define R_PARISC_TLS_DTPOFF32	244	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_DTPOFF64	245	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_LE21L	R_PARISC_TPREL21L
-+#define R_PARISC_TLS_LE14R	R_PARISC_TPREL14R
-+#define R_PARISC_TLS_IE21L	R_PARISC_LTOFF_TP21L
-+#define R_PARISC_TLS_IE14R	R_PARISC_LTOFF_TP14R
-+#define R_PARISC_TLS_TPREL32	R_PARISC_TPREL32
-+#define R_PARISC_TLS_TPREL64	R_PARISC_TPREL64
-+#define R_PARISC_HIRESERVE	255
-+
-+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PT_HP_TLS		(PT_LOOS + 0x0)
-+#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
-+#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
-+#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
-+#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
-+#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
-+#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
-+#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
-+#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
-+#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
-+#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
-+#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
-+#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
-+#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
-+#define PT_HP_STACK		(PT_LOOS + 0x14)
-+
-+#define PT_PARISC_ARCHEXT	0x70000000
-+#define PT_PARISC_UNWIND	0x70000001
-+
-+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PF_PARISC_SBP		0x08000000
-+
-+#define PF_HP_PAGE_SIZE		0x00100000
-+#define PF_HP_FAR_SHARED	0x00200000
-+#define PF_HP_NEAR_SHARED	0x00400000
-+#define PF_HP_CODE		0x01000000
-+#define PF_HP_MODIFY		0x02000000
-+#define PF_HP_LAZYSWAP		0x04000000
-+#define PF_HP_SBP		0x08000000
-+
-+
-+/* Alpha specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf64_Ehdr.  */
-+
-+#define EF_ALPHA_32BIT		1	/* All addresses must be < 2GB.  */
-+#define EF_ALPHA_CANRELAX	2	/* Relocations for relaxing exist.  */
-+
-+/* Legal values for sh_type field of Elf64_Shdr.  */
-+
-+/* These two are primerily concerned with ECOFF debugging info.  */
-+#define SHT_ALPHA_DEBUG		0x70000001
-+#define SHT_ALPHA_REGINFO	0x70000002
-+
-+/* Legal values for sh_flags field of Elf64_Shdr.  */
-+
-+#define SHF_ALPHA_GPREL		0x10000000
-+
-+/* Legal values for st_other field of Elf64_Sym.  */
-+#define STO_ALPHA_NOPV		0x80	/* No PV required.  */
-+#define STO_ALPHA_STD_GPLOAD	0x88	/* PV only used for initial ldgp.  */
-+
-+/* Alpha relocs.  */
-+
-+#define R_ALPHA_NONE		0	/* No reloc */
-+#define R_ALPHA_REFLONG		1	/* Direct 32 bit */
-+#define R_ALPHA_REFQUAD		2	/* Direct 64 bit */
-+#define R_ALPHA_GPREL32		3	/* GP relative 32 bit */
-+#define R_ALPHA_LITERAL		4	/* GP relative 16 bit w/optimization */
-+#define R_ALPHA_LITUSE		5	/* Optimization hint for LITERAL */
-+#define R_ALPHA_GPDISP		6	/* Add displacement to GP */
-+#define R_ALPHA_BRADDR		7	/* PC+4 relative 23 bit shifted */
-+#define R_ALPHA_HINT		8	/* PC+4 relative 16 bit shifted */
-+#define R_ALPHA_SREL16		9	/* PC relative 16 bit */
-+#define R_ALPHA_SREL32		10	/* PC relative 32 bit */
-+#define R_ALPHA_SREL64		11	/* PC relative 64 bit */
-+#define R_ALPHA_GPRELHIGH	17	/* GP relative 32 bit, high 16 bits */
-+#define R_ALPHA_GPRELLOW	18	/* GP relative 32 bit, low 16 bits */
-+#define R_ALPHA_GPREL16		19	/* GP relative 16 bit */
-+#define R_ALPHA_COPY		24	/* Copy symbol at runtime */
-+#define R_ALPHA_GLOB_DAT	25	/* Create GOT entry */
-+#define R_ALPHA_JMP_SLOT	26	/* Create PLT entry */
-+#define R_ALPHA_RELATIVE	27	/* Adjust by program base */
-+#define R_ALPHA_TLS_GD_HI	28
-+#define R_ALPHA_TLSGD		29
-+#define R_ALPHA_TLS_LDM		30
-+#define R_ALPHA_DTPMOD64	31
-+#define R_ALPHA_GOTDTPREL	32
-+#define R_ALPHA_DTPREL64	33
-+#define R_ALPHA_DTPRELHI	34
-+#define R_ALPHA_DTPRELLO	35
-+#define R_ALPHA_DTPREL16	36
-+#define R_ALPHA_GOTTPREL	37
-+#define R_ALPHA_TPREL64		38
-+#define R_ALPHA_TPRELHI		39
-+#define R_ALPHA_TPRELLO		40
-+#define R_ALPHA_TPREL16		41
-+/* Keep this the last entry.  */
-+#define R_ALPHA_NUM		46
-+
-+/* Magic values of the LITUSE relocation addend.  */
-+#define LITUSE_ALPHA_ADDR	0
-+#define LITUSE_ALPHA_BASE	1
-+#define LITUSE_ALPHA_BYTOFF	2
-+#define LITUSE_ALPHA_JSR	3
-+#define LITUSE_ALPHA_TLS_GD	4
-+#define LITUSE_ALPHA_TLS_LDM	5
-+
-+/* Legal values for d_tag of Elf64_Dyn.  */
-+#define DT_ALPHA_PLTRO		(DT_LOPROC + 0)
-+#define DT_ALPHA_NUM		1
-+
-+/* PowerPC specific declarations */
-+
-+/* Values for Elf32/64_Ehdr.e_flags.  */
-+#define EF_PPC_EMB		0x80000000	/* PowerPC embedded flag */
-+
-+/* Cygnus local bits below */
-+#define EF_PPC_RELOCATABLE	0x00010000	/* PowerPC -mrelocatable flag*/
-+#define EF_PPC_RELOCATABLE_LIB	0x00008000	/* PowerPC -mrelocatable-lib
-+						   flag */
-+
-+/* PowerPC relocations defined by the ABIs */
-+#define R_PPC_NONE		0
-+#define R_PPC_ADDR32		1	/* 32bit absolute address */
-+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-+#define R_PPC_ADDR16		3	/* 16bit absolute address */
-+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-+#define R_PPC_ADDR14_BRTAKEN	8
-+#define R_PPC_ADDR14_BRNTAKEN	9
-+#define R_PPC_REL24		10	/* PC relative 26 bit */
-+#define R_PPC_REL14		11	/* PC relative 16 bit */
-+#define R_PPC_REL14_BRTAKEN	12
-+#define R_PPC_REL14_BRNTAKEN	13
-+#define R_PPC_GOT16		14
-+#define R_PPC_GOT16_LO		15
-+#define R_PPC_GOT16_HI		16
-+#define R_PPC_GOT16_HA		17
-+#define R_PPC_PLTREL24		18
-+#define R_PPC_COPY		19
-+#define R_PPC_GLOB_DAT		20
-+#define R_PPC_JMP_SLOT		21
-+#define R_PPC_RELATIVE		22
-+#define R_PPC_LOCAL24PC		23
-+#define R_PPC_UADDR32		24
-+#define R_PPC_UADDR16		25
-+#define R_PPC_REL32		26
-+#define R_PPC_PLT32		27
-+#define R_PPC_PLTREL32		28
-+#define R_PPC_PLT16_LO		29
-+#define R_PPC_PLT16_HI		30
-+#define R_PPC_PLT16_HA		31
-+#define R_PPC_SDAREL16		32
-+#define R_PPC_SECTOFF		33
-+#define R_PPC_SECTOFF_LO	34
-+#define R_PPC_SECTOFF_HI	35
-+#define R_PPC_SECTOFF_HA	36
-+
-+/* PowerPC relocations defined for the TLS access ABI.  */
-+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
-+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
-+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
-+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
-+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
-+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
-+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
-+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
-+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
-+
-+/* The remaining relocs are from the Embedded ELF ABI, and are not
-+   in the SVR4 ELF ABI.  */
-+#define R_PPC_EMB_NADDR32	101
-+#define R_PPC_EMB_NADDR16	102
-+#define R_PPC_EMB_NADDR16_LO	103
-+#define R_PPC_EMB_NADDR16_HI	104
-+#define R_PPC_EMB_NADDR16_HA	105
-+#define R_PPC_EMB_SDAI16	106
-+#define R_PPC_EMB_SDA2I16	107
-+#define R_PPC_EMB_SDA2REL	108
-+#define R_PPC_EMB_SDA21		109	/* 16 bit offset in SDA */
-+#define R_PPC_EMB_MRKREF	110
-+#define R_PPC_EMB_RELSEC16	111
-+#define R_PPC_EMB_RELST_LO	112
-+#define R_PPC_EMB_RELST_HI	113
-+#define R_PPC_EMB_RELST_HA	114
-+#define R_PPC_EMB_BIT_FLD	115
-+#define R_PPC_EMB_RELSDA	116	/* 16 bit relative offset in SDA */
-+
-+/* Diab tool relocations.  */
-+#define R_PPC_DIAB_SDA21_LO	180	/* like EMB_SDA21, but lower 16 bit */
-+#define R_PPC_DIAB_SDA21_HI	181	/* like EMB_SDA21, but high 16 bit */
-+#define R_PPC_DIAB_SDA21_HA	182	/* like EMB_SDA21, adjusted high 16 */
-+#define R_PPC_DIAB_RELSDA_LO	183	/* like EMB_RELSDA, but lower 16 bit */
-+#define R_PPC_DIAB_RELSDA_HI	184	/* like EMB_RELSDA, but high 16 bit */
-+#define R_PPC_DIAB_RELSDA_HA	185	/* like EMB_RELSDA, adjusted high 16 */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC_IRELATIVE		248
-+
-+/* GNU relocs used in PIC code sequences.  */
-+#define R_PPC_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC_REL16_LO		250	/* half16   (sym+add-.)@l */
-+#define R_PPC_REL16_HI		251	/* half16   (sym+add-.)@h */
-+#define R_PPC_REL16_HA		252	/* half16   (sym+add-.)@ha */
-+
-+/* This is a phony reloc to handle any old fashioned TOC16 references
-+   that may still be in object files.  */
-+#define R_PPC_TOC16		255
-+
-+/* PowerPC specific values for the Dyn d_tag field.  */
-+#define DT_PPC_GOT		(DT_LOPROC + 0)
-+#define DT_PPC_NUM		1
-+
-+/* PowerPC64 relocations defined by the ABIs */
-+#define R_PPC64_NONE		R_PPC_NONE
-+#define R_PPC64_ADDR32		R_PPC_ADDR32 /* 32bit absolute address */
-+#define R_PPC64_ADDR24		R_PPC_ADDR24 /* 26bit address, word aligned */
-+#define R_PPC64_ADDR16		R_PPC_ADDR16 /* 16bit absolute address */
-+#define R_PPC64_ADDR16_LO	R_PPC_ADDR16_LO	/* lower 16bits of address */
-+#define R_PPC64_ADDR16_HI	R_PPC_ADDR16_HI	/* high 16bits of address. */
-+#define R_PPC64_ADDR16_HA	R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-+#define R_PPC64_ADDR14		R_PPC_ADDR14 /* 16bit address, word aligned */
-+#define R_PPC64_ADDR14_BRTAKEN	R_PPC_ADDR14_BRTAKEN
-+#define R_PPC64_ADDR14_BRNTAKEN	R_PPC_ADDR14_BRNTAKEN
-+#define R_PPC64_REL24		R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
-+#define R_PPC64_REL14		R_PPC_REL14 /* PC relative 16 bit */
-+#define R_PPC64_REL14_BRTAKEN	R_PPC_REL14_BRTAKEN
-+#define R_PPC64_REL14_BRNTAKEN	R_PPC_REL14_BRNTAKEN
-+#define R_PPC64_GOT16		R_PPC_GOT16
-+#define R_PPC64_GOT16_LO	R_PPC_GOT16_LO
-+#define R_PPC64_GOT16_HI	R_PPC_GOT16_HI
-+#define R_PPC64_GOT16_HA	R_PPC_GOT16_HA
-+
-+#define R_PPC64_COPY		R_PPC_COPY
-+#define R_PPC64_GLOB_DAT	R_PPC_GLOB_DAT
-+#define R_PPC64_JMP_SLOT	R_PPC_JMP_SLOT
-+#define R_PPC64_RELATIVE	R_PPC_RELATIVE
-+
-+#define R_PPC64_UADDR32		R_PPC_UADDR32
-+#define R_PPC64_UADDR16		R_PPC_UADDR16
-+#define R_PPC64_REL32		R_PPC_REL32
-+#define R_PPC64_PLT32		R_PPC_PLT32
-+#define R_PPC64_PLTREL32	R_PPC_PLTREL32
-+#define R_PPC64_PLT16_LO	R_PPC_PLT16_LO
-+#define R_PPC64_PLT16_HI	R_PPC_PLT16_HI
-+#define R_PPC64_PLT16_HA	R_PPC_PLT16_HA
-+
-+#define R_PPC64_SECTOFF		R_PPC_SECTOFF
-+#define R_PPC64_SECTOFF_LO	R_PPC_SECTOFF_LO
-+#define R_PPC64_SECTOFF_HI	R_PPC_SECTOFF_HI
-+#define R_PPC64_SECTOFF_HA	R_PPC_SECTOFF_HA
-+#define R_PPC64_ADDR30		37 /* word30 (S + A - P) >> 2 */
-+#define R_PPC64_ADDR64		38 /* doubleword64 S + A */
-+#define R_PPC64_ADDR16_HIGHER	39 /* half16 #higher(S + A) */
-+#define R_PPC64_ADDR16_HIGHERA	40 /* half16 #highera(S + A) */
-+#define R_PPC64_ADDR16_HIGHEST	41 /* half16 #highest(S + A) */
-+#define R_PPC64_ADDR16_HIGHESTA	42 /* half16 #highesta(S + A) */
-+#define R_PPC64_UADDR64		43 /* doubleword64 S + A */
-+#define R_PPC64_REL64		44 /* doubleword64 S + A - P */
-+#define R_PPC64_PLT64		45 /* doubleword64 L + A */
-+#define R_PPC64_PLTREL64	46 /* doubleword64 L + A - P */
-+#define R_PPC64_TOC16		47 /* half16* S + A - .TOC */
-+#define R_PPC64_TOC16_LO	48 /* half16 #lo(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HI	49 /* half16 #hi(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HA	50 /* half16 #ha(S + A - .TOC.) */
-+#define R_PPC64_TOC		51 /* doubleword64 .TOC */
-+#define R_PPC64_PLTGOT16	52 /* half16* M + A */
-+#define R_PPC64_PLTGOT16_LO	53 /* half16 #lo(M + A) */
-+#define R_PPC64_PLTGOT16_HI	54 /* half16 #hi(M + A) */
-+#define R_PPC64_PLTGOT16_HA	55 /* half16 #ha(M + A) */
-+
-+#define R_PPC64_ADDR16_DS	56 /* half16ds* (S + A) >> 2 */
-+#define R_PPC64_ADDR16_LO_DS	57 /* half16ds  #lo(S + A) >> 2 */
-+#define R_PPC64_GOT16_DS	58 /* half16ds* (G + A) >> 2 */
-+#define R_PPC64_GOT16_LO_DS	59 /* half16ds  #lo(G + A) >> 2 */
-+#define R_PPC64_PLT16_LO_DS	60 /* half16ds  #lo(L + A) >> 2 */
-+#define R_PPC64_SECTOFF_DS	61 /* half16ds* (R + A) >> 2 */
-+#define R_PPC64_SECTOFF_LO_DS	62 /* half16ds  #lo(R + A) >> 2 */
-+#define R_PPC64_TOC16_DS	63 /* half16ds* (S + A - .TOC.) >> 2 */
-+#define R_PPC64_TOC16_LO_DS	64 /* half16ds  #lo(S + A - .TOC.) >> 2 */
-+#define R_PPC64_PLTGOT16_DS	65 /* half16ds* (M + A) >> 2 */
-+#define R_PPC64_PLTGOT16_LO_DS	66 /* half16ds  #lo(M + A) >> 2 */
-+
-+/* PowerPC64 relocations defined for the TLS access ABI.  */
-+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
-+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
-+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
-+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
-+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
-+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
-+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
-+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
-+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
-+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
-+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
-+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
-+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
-+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
-+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC64_JMP_IREL	247
-+#define R_PPC64_IRELATIVE	248
-+#define R_PPC64_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC64_REL16_LO	250	/* half16   (sym+add-.)@l */
-+#define R_PPC64_REL16_HI	251	/* half16   (sym+add-.)@h */
-+#define R_PPC64_REL16_HA	252	/* half16   (sym+add-.)@ha */
-+
-+/* PowerPC64 specific values for the Dyn d_tag field.  */
-+#define DT_PPC64_GLINK  (DT_LOPROC + 0)
-+#define DT_PPC64_OPD	(DT_LOPROC + 1)
-+#define DT_PPC64_OPDSZ	(DT_LOPROC + 2)
-+#define DT_PPC64_NUM    3
-+
-+
-+/* ARM specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_ARM_RELEXEC		0x01
-+#define EF_ARM_HASENTRY		0x02
-+#define EF_ARM_INTERWORK	0x04
-+#define EF_ARM_APCS_26		0x08
-+#define EF_ARM_APCS_FLOAT	0x10
-+#define EF_ARM_PIC		0x20
-+#define EF_ARM_ALIGN8		0x40 /* 8-bit structure alignment is in use */
-+#define EF_ARM_NEW_ABI		0x80
-+#define EF_ARM_OLD_ABI		0x100
-+#define EF_ARM_SOFT_FLOAT	0x200
-+#define EF_ARM_VFP_FLOAT	0x400
-+#define EF_ARM_MAVERICK_FLOAT	0x800
-+
-+
-+/* Other constants defined in the ARM ELF spec. version B-01.  */
-+/* NB. These conflict with values defined above.  */
-+#define EF_ARM_SYMSARESORTED	0x04
-+#define EF_ARM_DYNSYMSUSESEGIDX	0x08
-+#define EF_ARM_MAPSYMSFIRST	0x10
-+#define EF_ARM_EABIMASK		0XFF000000
-+
-+/* Constants defined in AAELF.  */
-+#define EF_ARM_BE8	    0x00800000
-+#define EF_ARM_LE8	    0x00400000
-+
-+#define EF_ARM_EABI_VERSION(flags)	((flags) & EF_ARM_EABIMASK)
-+#define EF_ARM_EABI_UNKNOWN	0x00000000
-+#define EF_ARM_EABI_VER1	0x01000000
-+#define EF_ARM_EABI_VER2	0x02000000
-+#define EF_ARM_EABI_VER3	0x03000000
-+#define EF_ARM_EABI_VER4	0x04000000
-+#define EF_ARM_EABI_VER5	0x05000000
-+
-+/* Additional symbol types for Thumb.  */
-+#define STT_ARM_TFUNC		STT_LOPROC /* A Thumb function.  */
-+#define STT_ARM_16BIT		STT_HIPROC /* A Thumb label.  */
-+
-+/* ARM-specific values for sh_flags */
-+#define SHF_ARM_ENTRYSECT	0x10000000 /* Section contains an entry point */
-+#define SHF_ARM_COMDEF		0x80000000 /* Section may be multiply defined
-+					      in the input to a link step.  */
-+
-+/* ARM-specific program header flags */
-+#define PF_ARM_SB		0x10000000 /* Segment contains the location
-+					      addressed by the static base. */
-+#define PF_ARM_PI		0x20000000 /* Position-independent segment.  */
-+#define PF_ARM_ABS		0x40000000 /* Absolute segment.  */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_ARM_EXIDX		(PT_LOPROC + 1)	/* ARM unwind segment.  */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_ARM_EXIDX		(SHT_LOPROC + 1) /* ARM unwind section.  */
-+#define SHT_ARM_PREEMPTMAP	(SHT_LOPROC + 2) /* Preemption details.  */
-+#define SHT_ARM_ATTRIBUTES	(SHT_LOPROC + 3) /* ARM attributes section.  */
-+
-+
-+/* ARM relocs.  */
-+
-+#define R_ARM_NONE		0	/* No reloc */
-+#define R_ARM_PC24		1	/* PC relative 26 bit branch */
-+#define R_ARM_ABS32		2	/* Direct 32 bit  */
-+#define R_ARM_REL32		3	/* PC relative 32 bit */
-+#define R_ARM_PC13		4
-+#define R_ARM_ABS16		5	/* Direct 16 bit */
-+#define R_ARM_ABS12		6	/* Direct 12 bit */
-+#define R_ARM_THM_ABS5		7
-+#define R_ARM_ABS8		8	/* Direct 8 bit */
-+#define R_ARM_SBREL32		9
-+#define R_ARM_THM_PC22		10
-+#define R_ARM_THM_PC8		11
-+#define R_ARM_AMP_VCALL9	12
-+#define R_ARM_SWI24		13	/* Obsolete static relocation.  */
-+#define R_ARM_TLS_DESC		13      /* Dynamic relocation.  */
-+#define R_ARM_THM_SWI8		14
-+#define R_ARM_XPC25		15
-+#define R_ARM_THM_XPC22		16
-+#define R_ARM_TLS_DTPMOD32	17	/* ID of module containing symbol */
-+#define R_ARM_TLS_DTPOFF32	18	/* Offset in TLS block */
-+#define R_ARM_TLS_TPOFF32	19	/* Offset in static TLS block */
-+#define R_ARM_COPY		20	/* Copy symbol at runtime */
-+#define R_ARM_GLOB_DAT		21	/* Create GOT entry */
-+#define R_ARM_JUMP_SLOT		22	/* Create PLT entry */
-+#define R_ARM_RELATIVE		23	/* Adjust by program base */
-+#define R_ARM_GOTOFF		24	/* 32 bit offset to GOT */
-+#define R_ARM_GOTPC		25	/* 32 bit PC relative offset to GOT */
-+#define R_ARM_GOT32		26	/* 32 bit GOT entry */
-+#define R_ARM_PLT32		27	/* 32 bit PLT address */
-+#define R_ARM_ALU_PCREL_7_0	32
-+#define R_ARM_ALU_PCREL_15_8	33
-+#define R_ARM_ALU_PCREL_23_15	34
-+#define R_ARM_LDR_SBREL_11_0	35
-+#define R_ARM_ALU_SBREL_19_12	36
-+#define R_ARM_ALU_SBREL_27_20	37
-+#define R_ARM_TLS_GOTDESC	90
-+#define R_ARM_TLS_CALL		91
-+#define R_ARM_TLS_DESCSEQ	92
-+#define R_ARM_THM_TLS_CALL	93
-+#define R_ARM_GNU_VTENTRY	100
-+#define R_ARM_GNU_VTINHERIT	101
-+#define R_ARM_THM_PC11		102	/* thumb unconditional branch */
-+#define R_ARM_THM_PC9		103	/* thumb conditional branch */
-+#define R_ARM_TLS_GD32		104	/* PC-rel 32 bit for global dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDM32		105	/* PC-rel 32 bit for local dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDO32		106	/* 32 bit offset relative to TLS
-+					   block */
-+#define R_ARM_TLS_IE32		107	/* PC-rel 32 bit for GOT entry of
-+					   static TLS block offset */
-+#define R_ARM_TLS_LE32		108	/* 32 bit offset relative to static
-+					   TLS block */
-+#define	R_ARM_THM_TLS_DESCSEQ	129
-+#define R_ARM_IRELATIVE		160
-+#define R_ARM_RXPC25		249
-+#define R_ARM_RSBREL32		250
-+#define R_ARM_THM_RPC22		251
-+#define R_ARM_RREL32		252
-+#define R_ARM_RABS22		253
-+#define R_ARM_RPC24		254
-+#define R_ARM_RBASE		255
-+/* Keep this the last entry.  */
-+#define R_ARM_NUM		256
-+
-+/* IA-64 specific declarations.  */
-+
-+/* Processor specific flags for the Ehdr e_flags field.  */
-+#define EF_IA_64_MASKOS		0x0000000f	/* os-specific flags */
-+#define EF_IA_64_ABI64		0x00000010	/* 64-bit ABI */
-+#define EF_IA_64_ARCH		0xff000000	/* arch. version mask */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_IA_64_ARCHEXT	(PT_LOPROC + 0)	/* arch extension bits */
-+#define PT_IA_64_UNWIND		(PT_LOPROC + 1)	/* ia64 unwind bits */
-+#define PT_IA_64_HP_OPT_ANOT	(PT_LOOS + 0x12)
-+#define PT_IA_64_HP_HSL_ANOT	(PT_LOOS + 0x13)
-+#define PT_IA_64_HP_STACK	(PT_LOOS + 0x14)
-+
-+/* Processor specific flags for the Phdr p_flags field.  */
-+#define PF_IA_64_NORECOV	0x80000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_IA_64_EXT		(SHT_LOPROC + 0) /* extension bits */
-+#define SHT_IA_64_UNWIND	(SHT_LOPROC + 1) /* unwind bits */
-+
-+/* Processor specific flags for the Shdr sh_flags field.  */
-+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
-+#define SHF_IA_64_NORECOV	0x20000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Dyn d_tag field.  */
-+#define DT_IA_64_PLT_RESERVE	(DT_LOPROC + 0)
-+#define DT_IA_64_NUM		1
-+
-+/* IA-64 relocations.  */
-+#define R_IA64_NONE		0x00	/* none */
-+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
-+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
-+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
-+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
-+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
-+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
-+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
-+#define R_IA64_GPREL22		0x2a	/* @gprel(sym + add), add imm22 */
-+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym + add), mov imm64 */
-+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym + add), data4 MSB */
-+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym + add), data4 LSB */
-+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym + add), data8 MSB */
-+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym + add), add imm22 */
-+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym + add), add imm22 */
-+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym + add), data8 MSB */
-+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym + add), data8 LSB */
-+#define R_IA64_FPTR64I		0x43	/* @fptr(sym + add), mov imm64 */
-+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym + add), data4 MSB */
-+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym + add), data4 LSB */
-+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym + add), data8 MSB */
-+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym + add), data8 LSB */
-+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym + add), brl */
-+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym + add), ptb, call */
-+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym + add), chk.s */
-+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym + add), fchkf */
-+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym + add), data4 MSB */
-+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym + add), data4 LSB */
-+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym + add), data8 MSB */
-+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
-+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
-+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), data4 MSB */
-+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), data4 LSB */
-+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), data8 MSB */
-+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), data8 LSB */
-+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym + add), data4 MSB */
-+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym + add), data4 LSB */
-+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym + add), data8 MSB */
-+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym + add), data8 LSB */
-+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym + add), data4 MSB */
-+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym + add), data4 LSB */
-+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym + add), data8 MSB */
-+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym + add), data8 LSB */
-+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
-+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
-+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
-+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
-+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
-+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
-+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
-+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
-+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym + add), 21bit inst */
-+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym + add), 22bit inst */
-+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym + add), 64bit inst */
-+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
-+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
-+#define R_IA64_COPY		0x84	/* copy relocation */
-+#define R_IA64_SUB		0x85	/* Addend and symbol difference */
-+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
-+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
-+#define R_IA64_TPREL14		0x91	/* @tprel(sym + add), imm14 */
-+#define R_IA64_TPREL22		0x92	/* @tprel(sym + add), imm22 */
-+#define R_IA64_TPREL64I		0x93	/* @tprel(sym + add), imm64 */
-+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym + add), data8 MSB */
-+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), imm2 */
-+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym + add), data8 MSB */
-+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(sym + add)), imm22 */
-+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym + add), imm14 */
-+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym + add), imm22 */
-+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym + add), imm64 */
-+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym + add), data4 MSB */
-+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym + add), data4 LSB */
-+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym + add), data8 MSB */
-+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
-+
-+/* SH specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_SH_MACH_MASK		0x1f
-+#define EF_SH_UNKNOWN		0x0
-+#define EF_SH1			0x1
-+#define EF_SH2			0x2
-+#define EF_SH3			0x3
-+#define EF_SH_DSP		0x4
-+#define EF_SH3_DSP		0x5
-+#define EF_SH4AL_DSP		0x6
-+#define EF_SH3E			0x8
-+#define EF_SH4			0x9
-+#define EF_SH2E			0xb
-+#define EF_SH4A			0xc
-+#define EF_SH2A			0xd
-+#define EF_SH4_NOFPU		0x10
-+#define EF_SH4A_NOFPU		0x11
-+#define EF_SH4_NOMMU_NOFPU	0x12
-+#define EF_SH2A_NOFPU		0x13
-+#define EF_SH3_NOMMU		0x14
-+#define EF_SH2A_SH4_NOFPU	0x15
-+#define EF_SH2A_SH3_NOFPU	0x16
-+#define EF_SH2A_SH4		0x17
-+#define EF_SH2A_SH3E		0x18
-+
-+/* SH relocs.  */
-+#define	R_SH_NONE		0
-+#define	R_SH_DIR32		1
-+#define	R_SH_REL32		2
-+#define	R_SH_DIR8WPN		3
-+#define	R_SH_IND12W		4
-+#define	R_SH_DIR8WPL		5
-+#define	R_SH_DIR8WPZ		6
-+#define	R_SH_DIR8BP		7
-+#define	R_SH_DIR8W		8
-+#define	R_SH_DIR8L		9
-+#define	R_SH_SWITCH16		25
-+#define	R_SH_SWITCH32		26
-+#define	R_SH_USES		27
-+#define	R_SH_COUNT		28
-+#define	R_SH_ALIGN		29
-+#define	R_SH_CODE		30
-+#define	R_SH_DATA		31
-+#define	R_SH_LABEL		32
-+#define	R_SH_SWITCH8		33
-+#define	R_SH_GNU_VTINHERIT	34
-+#define	R_SH_GNU_VTENTRY	35
-+#define	R_SH_TLS_GD_32		144
-+#define	R_SH_TLS_LD_32		145
-+#define	R_SH_TLS_LDO_32		146
-+#define	R_SH_TLS_IE_32		147
-+#define	R_SH_TLS_LE_32		148
-+#define	R_SH_TLS_DTPMOD32	149
-+#define	R_SH_TLS_DTPOFF32	150
-+#define	R_SH_TLS_TPOFF32	151
-+#define	R_SH_GOT32		160
-+#define	R_SH_PLT32		161
-+#define	R_SH_COPY		162
-+#define	R_SH_GLOB_DAT		163
-+#define	R_SH_JMP_SLOT		164
-+#define	R_SH_RELATIVE		165
-+#define	R_SH_GOTOFF		166
-+#define	R_SH_GOTPC		167
-+/* Keep this the last entry.  */
-+#define	R_SH_NUM		256
-+
-+/* S/390 specific definitions.  */
-+
-+/* Valid values for the e_flags field.  */
-+
-+#define EF_S390_HIGH_GPRS    0x00000001  /* High GPRs kernel facility needed.  */
-+
-+/* Additional s390 relocs */
-+
-+#define R_390_NONE		0	/* No reloc.  */
-+#define R_390_8			1	/* Direct 8 bit.  */
-+#define R_390_12		2	/* Direct 12 bit.  */
-+#define R_390_16		3	/* Direct 16 bit.  */
-+#define R_390_32		4	/* Direct 32 bit.  */
-+#define R_390_PC32		5	/* PC relative 32 bit.	*/
-+#define R_390_GOT12		6	/* 12 bit GOT offset.  */
-+#define R_390_GOT32		7	/* 32 bit GOT offset.  */
-+#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
-+#define R_390_COPY		9	/* Copy symbol at runtime.  */
-+#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
-+#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
-+#define R_390_RELATIVE		12	/* Adjust by program base.  */
-+#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
-+#define R_390_GOTPC		14	/* 32 bit PC relative offset to GOT.  */
-+#define R_390_GOT16		15	/* 16 bit GOT offset.  */
-+#define R_390_PC16		16	/* PC relative 16 bit.	*/
-+#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
-+#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
-+#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
-+#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
-+#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
-+#define R_390_64		22	/* Direct 64 bit.  */
-+#define R_390_PC64		23	/* PC relative 64 bit.	*/
-+#define R_390_GOT64		24	/* 64 bit GOT offset.  */
-+#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
-+#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
-+#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
-+#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
-+#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
-+#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
-+#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
-+#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
-+#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
-+#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
-+#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code.  */
-+#define R_390_TLS_GDCALL	38	/* Tag for function call in general
-+					   dynamic TLS code. */
-+#define R_390_TLS_LDCALL	39	/* Tag for function call in local
-+					   dynamic TLS code. */
-+#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
-+					   thread local data.  */
-+#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
-+					  thread local data.  */
-+#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
-+					   block offset. */
-+#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
-+#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.	 */
-+#define R_390_TLS_TPOFF		56	/* Negated offset in static TLS
-+					   block.  */
-+#define R_390_20		57	/* Direct 20 bit.  */
-+#define R_390_GOT20		58	/* 20 bit GOT offset.  */
-+#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
-+#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_IRELATIVE         61      /* STT_GNU_IFUNC relocation.  */
-+/* Keep this the last entry.  */
-+#define R_390_NUM		62
-+
-+
-+/* CRIS relocations.  */
-+#define R_CRIS_NONE		0
-+#define R_CRIS_8		1
-+#define R_CRIS_16		2
-+#define R_CRIS_32		3
-+#define R_CRIS_8_PCREL		4
-+#define R_CRIS_16_PCREL		5
-+#define R_CRIS_32_PCREL		6
-+#define R_CRIS_GNU_VTINHERIT	7
-+#define R_CRIS_GNU_VTENTRY	8
-+#define R_CRIS_COPY		9
-+#define R_CRIS_GLOB_DAT		10
-+#define R_CRIS_JUMP_SLOT	11
-+#define R_CRIS_RELATIVE		12
-+#define R_CRIS_16_GOT		13
-+#define R_CRIS_32_GOT		14
-+#define R_CRIS_16_GOTPLT	15
-+#define R_CRIS_32_GOTPLT	16
-+#define R_CRIS_32_GOTREL	17
-+#define R_CRIS_32_PLT_GOTREL	18
-+#define R_CRIS_32_PLT_PCREL	19
-+
-+#define R_CRIS_NUM		20
-+
-+
-+/* AMD x86-64 relocations.  */
-+#define R_X86_64_NONE		0	/* No reloc */
-+#define R_X86_64_64		1	/* Direct 64 bit  */
-+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
-+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
-+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
-+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
-+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
-+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
-+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
-+#define R_X86_64_GOTPCREL	9	/* 32 bit signed PC relative
-+					   offset to GOT */
-+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
-+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
-+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
-+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
-+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
-+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
-+#define R_X86_64_DTPMOD64	16	/* ID of module containing symbol */
-+#define R_X86_64_DTPOFF64	17	/* Offset in module's TLS block */
-+#define R_X86_64_TPOFF64	18	/* Offset in initial TLS block */
-+#define R_X86_64_TLSGD		19	/* 32 bit signed PC relative offset
-+					   to two GOT entries for GD symbol */
-+#define R_X86_64_TLSLD		20	/* 32 bit signed PC relative offset
-+					   to two GOT entries for LD symbol */
-+#define R_X86_64_DTPOFF32	21	/* Offset in TLS block */
-+#define R_X86_64_GOTTPOFF	22	/* 32 bit signed PC relative offset
-+					   to GOT entry for IE symbol */
-+#define R_X86_64_TPOFF32	23	/* Offset in initial TLS block */
-+#define R_X86_64_PC64		24	/* PC relative 64 bit */
-+#define R_X86_64_GOTOFF64	25	/* 64 bit offset to GOT */
-+#define R_X86_64_GOTPC32	26	/* 32 bit signed pc relative
-+					   offset to GOT */
-+#define R_X86_64_GOT64		27	/* 64-bit GOT entry offset */
-+#define R_X86_64_GOTPCREL64	28	/* 64-bit PC relative offset
-+					   to GOT entry */
-+#define R_X86_64_GOTPC64	29	/* 64-bit PC relative offset to GOT */
-+#define R_X86_64_GOTPLT64	30 	/* like GOT64, says PLT entry needed */
-+#define R_X86_64_PLTOFF64	31	/* 64-bit GOT relative offset
-+					   to PLT entry */
-+#define R_X86_64_SIZE32		32	/* Size of symbol plus 32-bit addend */
-+#define R_X86_64_SIZE64		33	/* Size of symbol plus 64-bit addend */
-+#define R_X86_64_GOTPC32_TLSDESC 34	/* GOT offset for TLS descriptor.  */
-+#define R_X86_64_TLSDESC_CALL   35	/* Marker for call through TLS
-+					   descriptor.  */
-+#define R_X86_64_TLSDESC        36	/* TLS descriptor.  */
-+#define R_X86_64_IRELATIVE	37	/* Adjust indirectly by program base */
-+#define R_X86_64_RELATIVE64	38	/* 64-bit adjust by program base */
-+
-+#define R_X86_64_NUM		39
-+
-+
-+/* AM33 relocations.  */
-+#define R_MN10300_NONE		0	/* No reloc.  */
-+#define R_MN10300_32		1	/* Direct 32 bit.  */
-+#define R_MN10300_16		2	/* Direct 16 bit.  */
-+#define R_MN10300_8		3	/* Direct 8 bit.  */
-+#define R_MN10300_PCREL32	4	/* PC-relative 32-bit.  */
-+#define R_MN10300_PCREL16	5	/* PC-relative 16-bit signed.  */
-+#define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
-+#define R_MN10300_GNU_VTINHERIT	7	/* Ancient C++ vtable garbage... */
-+#define R_MN10300_GNU_VTENTRY	8	/* ... collection annotation.  */
-+#define R_MN10300_24		9	/* Direct 24 bit.  */
-+#define R_MN10300_GOTPC32	10	/* 32-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTPC16	11	/* 16-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTOFF32	12	/* 32-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF24	13	/* 24-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF16	14	/* 16-bit offset from GOT.  */
-+#define R_MN10300_PLT32		15	/* 32-bit PCrel to PLT entry.  */
-+#define R_MN10300_PLT16		16	/* 16-bit PCrel to PLT entry.  */
-+#define R_MN10300_GOT32		17	/* 32-bit offset to GOT entry.  */
-+#define R_MN10300_GOT24		18	/* 24-bit offset to GOT entry.  */
-+#define R_MN10300_GOT16		19	/* 16-bit offset to GOT entry.  */
-+#define R_MN10300_COPY		20	/* Copy symbol at runtime.  */
-+#define R_MN10300_GLOB_DAT	21	/* Create GOT entry.  */
-+#define R_MN10300_JMP_SLOT	22	/* Create PLT entry.  */
-+#define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
-+
-+#define R_MN10300_NUM		24
-+
-+
-+/* M32R relocs.  */
-+#define R_M32R_NONE		0	/* No reloc. */
-+#define R_M32R_16		1	/* Direct 16 bit. */
-+#define R_M32R_32		2	/* Direct 32 bit. */
-+#define R_M32R_24		3	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL		4	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL		5	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL		6	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO		7	/* High 16 bit with unsigned low. */
-+#define R_M32R_HI16_SLO		8	/* High 16 bit with signed low. */
-+#define R_M32R_LO16		9	/* Low 16 bit. */
-+#define R_M32R_SDA16		10	/* 16 bit offset in SDA. */
-+#define R_M32R_GNU_VTINHERIT	11
-+#define R_M32R_GNU_VTENTRY	12
-+/* M32R relocs use SHT_RELA.  */
-+#define R_M32R_16_RELA		33	/* Direct 16 bit. */
-+#define R_M32R_32_RELA		34	/* Direct 32 bit. */
-+#define R_M32R_24_RELA		35	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL_RELA	36	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL_RELA	37	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL_RELA	38	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO_RELA	39	/* High 16 bit with unsigned low */
-+#define R_M32R_HI16_SLO_RELA	40	/* High 16 bit with signed low */
-+#define R_M32R_LO16_RELA	41	/* Low 16 bit */
-+#define R_M32R_SDA16_RELA	42	/* 16 bit offset in SDA */
-+#define R_M32R_RELA_GNU_VTINHERIT	43
-+#define R_M32R_RELA_GNU_VTENTRY	44
-+#define R_M32R_REL32		45	/* PC relative 32 bit.  */
-+
-+#define R_M32R_GOT24		48	/* 24 bit GOT entry */
-+#define R_M32R_26_PLTREL	49	/* 26 bit PC relative to PLT shifted */
-+#define R_M32R_COPY		50	/* Copy symbol at runtime */
-+#define R_M32R_GLOB_DAT		51	/* Create GOT entry */
-+#define R_M32R_JMP_SLOT		52	/* Create PLT entry */
-+#define R_M32R_RELATIVE		53	/* Adjust by program base */
-+#define R_M32R_GOTOFF		54	/* 24 bit offset to GOT */
-+#define R_M32R_GOTPC24		55	/* 24 bit PC relative offset to GOT */
-+#define R_M32R_GOT16_HI_ULO	56	/* High 16 bit GOT entry with unsigned
-+					   low */
-+#define R_M32R_GOT16_HI_SLO	57	/* High 16 bit GOT entry with signed
-+					   low */
-+#define R_M32R_GOT16_LO		58	/* Low 16 bit GOT entry */
-+#define R_M32R_GOTPC_HI_ULO	59	/* High 16 bit PC relative offset to
-+					   GOT with unsigned low */
-+#define R_M32R_GOTPC_HI_SLO	60	/* High 16 bit PC relative offset to
-+					   GOT with signed low */
-+#define R_M32R_GOTPC_LO		61	/* Low 16 bit PC relative offset to
-+					   GOT */
-+#define R_M32R_GOTOFF_HI_ULO	62	/* High 16 bit offset to GOT
-+					   with unsigned low */
-+#define R_M32R_GOTOFF_HI_SLO	63	/* High 16 bit offset to GOT
-+					   with signed low */
-+#define R_M32R_GOTOFF_LO	64	/* Low 16 bit offset to GOT */
-+#define R_M32R_NUM		256	/* Keep this the last entry. */
-+
-+
-+/* TILEPro relocations.  */
-+#define R_TILEPRO_NONE		0	/* No reloc */
-+#define R_TILEPRO_32		1	/* Direct 32 bit */
-+#define R_TILEPRO_16		2	/* Direct 16 bit */
-+#define R_TILEPRO_8		3	/* Direct 8 bit */
-+#define R_TILEPRO_32_PCREL	4	/* PC relative 32 bit */
-+#define R_TILEPRO_16_PCREL	5	/* PC relative 16 bit */
-+#define R_TILEPRO_8_PCREL	6	/* PC relative 8 bit */
-+#define R_TILEPRO_LO16		7	/* Low 16 bit */
-+#define R_TILEPRO_HI16		8	/* High 16 bit */
-+#define R_TILEPRO_HA16		9	/* High 16 bit, adjusted */
-+#define R_TILEPRO_COPY		10	/* Copy relocation */
-+#define R_TILEPRO_GLOB_DAT	11	/* Create GOT entry */
-+#define R_TILEPRO_JMP_SLOT	12	/* Create PLT entry */
-+#define R_TILEPRO_RELATIVE	13	/* Adjust by program base */
-+#define R_TILEPRO_BROFF_X1	14	/* X1 pipe branch offset */
-+#define R_TILEPRO_JOFFLONG_X1	15	/* X1 pipe jump offset */
-+#define R_TILEPRO_JOFFLONG_X1_PLT 16	/* X1 pipe jump offset to PLT */
-+#define R_TILEPRO_IMM8_X0	17	/* X0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y0	18	/* Y0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_X1	19	/* X1 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y1	20	/* Y1 pipe 8-bit */
-+#define R_TILEPRO_MT_IMM15_X1	21	/* X1 pipe mtspr */
-+#define R_TILEPRO_MF_IMM15_X1	22	/* X1 pipe mfspr */
-+#define R_TILEPRO_IMM16_X0	23	/* X0 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X1	24	/* X1 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X0_LO	25	/* X0 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X1_LO	26	/* X1 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X0_HI	27	/* X0 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X1_HI	28	/* X1 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X0_HA	29	/* X0 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X1_HA	30	/* X1 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X0_PCREL 31	/* X0 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X1_PCREL 32	/* X1 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X0_LO_PCREL 33	/* X0 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X1_LO_PCREL 34	/* X1 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X0_HI_PCREL 35	/* X0 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X1_HI_PCREL 36	/* X1 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X0_HA_PCREL 37	/* X0 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X1_HA_PCREL 38	/* X1 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X0_GOT	39	/* X0 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT	40	/* X1 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_LO 41	/* X0 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_LO 42	/* X1 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HI 43	/* X0 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HI 44	/* X1 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HA 45	/* X0 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HA 46	/* X1 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_MMSTART_X0	47	/* X0 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X0	48	/* X0 pipe mm "end" */
-+#define R_TILEPRO_MMSTART_X1	49	/* X1 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X1	50	/* X1 pipe mm "end" */
-+#define R_TILEPRO_SHAMT_X0	51	/* X0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_X1	52	/* X1 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y0	53	/* Y0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y1	54	/* Y1 pipe shift amount */
-+#define R_TILEPRO_DEST_IMM8_X1	55	/* X1 pipe destination 8-bit */
-+/* Relocs 56-59 are currently not defined.  */
-+#define R_TILEPRO_TLS_GD_CALL	60	/* "jal" for TLS GD */
-+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_TLS_IE_LOAD	65	/* "lw_tls" for TLS IE */
-+#define R_TILEPRO_IMM16_X0_TLS_GD 66	/* X0 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD 67	/* X1 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68	/* X0 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69	/* X1 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70	/* X0 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71	/* X1 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72	/* X0 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73	/* X1 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE 74	/* X0 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE 75	/* X1 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76	/* X0 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77	/* X1 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78	/* X0 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79	/* X1 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80	/* X0 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81	/* X1 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_TLS_DTPMOD32	82	/* ID of module containing symbol */
-+#define R_TILEPRO_TLS_DTPOFF32	83	/* Offset in TLS block */
-+#define R_TILEPRO_TLS_TPOFF32	84	/* Offset in static TLS block */
-+#define R_TILEPRO_IMM16_X0_TLS_LE 85	/* X0 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE 86	/* X1 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87	/* X0 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88	/* X1 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89	/* X0 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90	/* X1 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91	/* X0 pipe ha() 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92	/* X1 pipe ha() 16-bit TLS LE offset */
-+
-+#define R_TILEPRO_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEPRO_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEPRO_NUM		130
-+
-+
-+/* TILE-Gx relocations.  */
-+#define R_TILEGX_NONE		0	/* No reloc */
-+#define R_TILEGX_64		1	/* Direct 64 bit */
-+#define R_TILEGX_32		2	/* Direct 32 bit */
-+#define R_TILEGX_16		3	/* Direct 16 bit */
-+#define R_TILEGX_8		4	/* Direct 8 bit */
-+#define R_TILEGX_64_PCREL	5	/* PC relative 64 bit */
-+#define R_TILEGX_32_PCREL	6	/* PC relative 32 bit */
-+#define R_TILEGX_16_PCREL	7	/* PC relative 16 bit */
-+#define R_TILEGX_8_PCREL	8	/* PC relative 8 bit */
-+#define R_TILEGX_HW0		9	/* hword 0 16-bit */
-+#define R_TILEGX_HW1		10	/* hword 1 16-bit */
-+#define R_TILEGX_HW2		11	/* hword 2 16-bit */
-+#define R_TILEGX_HW3		12	/* hword 3 16-bit */
-+#define R_TILEGX_HW0_LAST	13	/* last hword 0 16-bit */
-+#define R_TILEGX_HW1_LAST	14	/* last hword 1 16-bit */
-+#define R_TILEGX_HW2_LAST	15	/* last hword 2 16-bit */
-+#define R_TILEGX_COPY		16	/* Copy relocation */
-+#define R_TILEGX_GLOB_DAT	17	/* Create GOT entry */
-+#define R_TILEGX_JMP_SLOT	18	/* Create PLT entry */
-+#define R_TILEGX_RELATIVE	19	/* Adjust by program base */
-+#define R_TILEGX_BROFF_X1	20	/* X1 pipe branch offset */
-+#define R_TILEGX_JUMPOFF_X1	21	/* X1 pipe jump offset */
-+#define R_TILEGX_JUMPOFF_X1_PLT	22	/* X1 pipe jump offset to PLT */
-+#define R_TILEGX_IMM8_X0	23	/* X0 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y0	24	/* Y0 pipe 8-bit */
-+#define R_TILEGX_IMM8_X1	25	/* X1 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y1	26	/* Y1 pipe 8-bit */
-+#define R_TILEGX_DEST_IMM8_X1	27	/* X1 pipe destination 8-bit */
-+#define R_TILEGX_MT_IMM14_X1	28	/* X1 pipe mtspr */
-+#define R_TILEGX_MF_IMM14_X1	29	/* X1 pipe mfspr */
-+#define R_TILEGX_MMSTART_X0	30	/* X0 pipe mm "start" */
-+#define R_TILEGX_MMEND_X0	31	/* X0 pipe mm "end" */
-+#define R_TILEGX_SHAMT_X0	32	/* X0 pipe shift amount */
-+#define R_TILEGX_SHAMT_X1	33	/* X1 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y0	34	/* Y0 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y1	35	/* Y1 pipe shift amount */
-+#define R_TILEGX_IMM16_X0_HW0	36	/* X0 pipe hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0	37	/* X1 pipe hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1	38	/* X0 pipe hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1	39	/* X1 pipe hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2	40	/* X0 pipe hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2	41	/* X1 pipe hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3	42	/* X0 pipe hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3	43	/* X1 pipe hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST 44	/* X0 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST 45	/* X1 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST 46	/* X0 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST 47	/* X1 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST 48	/* X0 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST 49	/* X1 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_PCREL 50	/* X0 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_PCREL 51	/* X1 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_PCREL 52	/* X0 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_PCREL 53	/* X1 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_PCREL 54	/* X0 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_PCREL 55	/* X1 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3_PCREL 56	/* X0 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3_PCREL 57	/* X1 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_GOT 64	/* X0 pipe hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_GOT 65	/* X1 pipe hword 0 GOT offset */
-+/* Relocs 66-71 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */
-+/* Relocs 76-77 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78	/* X0 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79	/* X1 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80	/* X0 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81	/* X1 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */
-+/* Relocs 90-91 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92	/* X0 pipe hword 0 TLS IE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93	/* X1 pipe hword 0 TLS IE offset */
-+/* Relocs 94-99 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */
-+/* Relocs 104-105 are currently not defined.  */
-+#define R_TILEGX_TLS_DTPMOD64	106	/* 64-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF64	107	/* 64-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF64	108	/* 64-bit offset in static TLS block */
-+#define R_TILEGX_TLS_DTPMOD32	109	/* 32-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF32	110	/* 32-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF32	111	/* 32-bit offset in static TLS block */
-+#define R_TILEGX_TLS_GD_CALL	112	/* "jal" for TLS GD */
-+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEGX_TLS_IE_LOAD	117	/* "ld_tls" for TLS IE */
-+#define R_TILEGX_IMM8_X0_TLS_ADD 118	/* X0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_X1_TLS_ADD 119	/* X1 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y0_TLS_ADD 120	/* Y0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y1_TLS_ADD 121	/* Y1 pipe "addi" for TLS GD/IE */
-+
-+#define R_TILEGX_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEGX_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEGX_NUM		130
-+
-+#endif	/* elf.h */
---- a/scripts/mod/mk_elfconfig.c
-+++ b/scripts/mod/mk_elfconfig.c
-@@ -1,7 +1,11 @@
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
-+#ifndef __APPLE__
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- int
- main(int argc, char **argv)
---- a/scripts/mod/modpost.h
-+++ b/scripts/mod/modpost.h
-@@ -7,7 +7,11 @@
- #include <sys/mman.h>
- #include <fcntl.h>
- #include <unistd.h>
-+#if !(defined(__APPLE__) || defined(__CYGWIN__))
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- #include "elfconfig.h"
- 
diff --git a/target/linux/generic/hack-4.9/211-host_tools_portability.patch b/target/linux/generic/hack-4.9/211-host_tools_portability.patch
deleted file mode 100644
index e4d6851418..0000000000
--- a/target/linux/generic/hack-4.9/211-host_tools_portability.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 7f698012384ccb1ed10cc758acfd085096fdb307 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:02:03 +0200
-Subject: kernel: fix linux 4.9 host tools portability issues
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- tools/build/Build.include       | 2 +-
- tools/perf/pmu-events/jevents.c | 1 +
- tools/perf/pmu-events/json.c    | 1 -
- 3 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/tools/build/Build.include
-+++ b/tools/build/Build.include
-@@ -96,4 +96,4 @@ cxx_flags = -Wp,-MD,$(depfile),-MT,$@ $(
- ###
- ## HOSTCC C flags
- 
--host_c_flags = -Wp,-MD,$(depfile),-MT,$@ $(CHOSTFLAGS) -D"BUILD_STR(s)=\#s" $(CHOSTFLAGS_$(basetarget).o) $(CHOSTFLAGS_$(obj))
-+host_c_flags = -MD -MF $(depfile) -MT $@ $(CHOSTFLAGS) -D"BUILD_STR(s)=\#s" $(CHOSTFLAGS_$(basetarget).o) $(CHOSTFLAGS_$(obj))
---- a/tools/perf/pmu-events/jevents.c
-+++ b/tools/perf/pmu-events/jevents.c
-@@ -35,6 +35,7 @@
- #include <stdlib.h>
- #include <errno.h>
- #include <string.h>
-+#include <strings.h>
- #include <ctype.h>
- #include <unistd.h>
- #include <stdarg.h>
---- a/tools/perf/pmu-events/json.c
-+++ b/tools/perf/pmu-events/json.c
-@@ -38,7 +38,6 @@
- #include <unistd.h>
- #include "jsmn.h"
- #include "json.h"
--#include <linux/kernel.h>
- 
- 
- static char *mapfile(const char *fn, size_t *size)
diff --git a/target/linux/generic/hack-4.9/212-byteshift_portability.patch b/target/linux/generic/hack-4.9/212-byteshift_portability.patch
deleted file mode 100644
index 6def12d0cf..0000000000
--- a/target/linux/generic/hack-4.9/212-byteshift_portability.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 48232d3d931c95953ce2ddfe7da7bb164aef6a73 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:03:16 +0200
-Subject: linux-3.6: fix portability of some includes files in tools/ used on the host
-
-lede-commit: 6040b1d29ab1f047c5e49b748abcb6a3196add28
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- tools/include/tools/be_byteshift.h |  4 ++++
- tools/include/tools/le_byteshift.h |  4 ++++
- tools/include/tools/linux_types.h  | 22 ++++++++++++++++++++++
- 3 files changed, 30 insertions(+)
- create mode 100644 tools/include/tools/linux_types.h
-
---- a/tools/include/tools/be_byteshift.h
-+++ b/tools/include/tools/be_byteshift.h
-@@ -1,6 +1,10 @@
- #ifndef _TOOLS_BE_BYTESHIFT_H
- #define _TOOLS_BE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_be16(const uint8_t *p)
---- a/tools/include/tools/le_byteshift.h
-+++ b/tools/include/tools/le_byteshift.h
-@@ -1,6 +1,10 @@
- #ifndef _TOOLS_LE_BYTESHIFT_H
- #define _TOOLS_LE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_le16(const uint8_t *p)
---- /dev/null
-+++ b/tools/include/tools/linux_types.h
-@@ -0,0 +1,22 @@
-+#ifndef __LINUX_TYPES_H
-+#define __LINUX_TYPES_H
-+
-+#include <stdint.h>
-+
-+typedef uint8_t __u8;
-+typedef uint8_t __be8;
-+typedef uint8_t __le8;
-+
-+typedef uint16_t __u16;
-+typedef uint16_t __be16;
-+typedef uint16_t __le16;
-+
-+typedef uint32_t __u32;
-+typedef uint32_t __be32;
-+typedef uint32_t __le32;
-+
-+typedef uint64_t __u64;
-+typedef uint64_t __be64;
-+typedef uint64_t __le64;
-+
-+#endif
diff --git a/target/linux/generic/hack-4.9/214-spidev_h_portability.patch b/target/linux/generic/hack-4.9/214-spidev_h_portability.patch
deleted file mode 100644
index ad4706c821..0000000000
--- a/target/linux/generic/hack-4.9/214-spidev_h_portability.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From be9be95ff10e16a5b4ad36f903978d0cc5747024 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:04:08 +0200
-Subject: kernel: fix linux/spi/spidev.h portability issues with musl
-
-Felix will try to get this define included into musl
-
-lede-commit: 795e7cf60de19e7a076a46874fab7bb88b43bbff
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/spi/spidev.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/uapi/linux/spi/spidev.h
-+++ b/include/uapi/linux/spi/spidev.h
-@@ -112,7 +112,7 @@ struct spi_ioc_transfer {
- 
- /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
- #define SPI_MSGSIZE(N) \
--	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
-+	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
- 		? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
- #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
- 
diff --git a/target/linux/generic/hack-4.9/220-gc_sections.patch b/target/linux/generic/hack-4.9/220-gc_sections.patch
deleted file mode 100644
index 732e38aaf0..0000000000
--- a/target/linux/generic/hack-4.9/220-gc_sections.patch
+++ /dev/null
@@ -1,448 +0,0 @@
-From e3d8676f5722b7622685581e06e8f53e6138e3ab Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 23:42:36 +0200
-Subject: use -ffunction-sections, -fdata-sections and --gc-sections
-
-In combination with kernel symbol export stripping this significantly reduces
-the kernel image size. Used on both ARM and MIPS architectures.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- Makefile                          | 10 +++----
- arch/arm/Kconfig                  |  1 +
- arch/arm/boot/compressed/Makefile |  1 +
- arch/arm/kernel/vmlinux.lds.S     | 26 ++++++++--------
- arch/mips/Kconfig                 |  1 +
- arch/mips/kernel/vmlinux.lds.S    |  4 +--
- include/asm-generic/vmlinux.lds.h | 63 ++++++++++++++++++++-------------------
- 7 files changed, 55 insertions(+), 51 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -401,6 +401,11 @@ KBUILD_CFLAGS_MODULE  := -DMODULE
- KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s)
- GCC_PLUGINS_CFLAGS :=
- 
-+ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
-+KBUILD_CFLAGS_KERNEL	+= $(call cc-option,-ffunction-sections,)
-+KBUILD_CFLAGS_KERNEL	+= $(call cc-option,-fdata-sections,)
-+endif
-+
- # Read KERNELRELEASE from include/config/kernel.release (if it exists)
- KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
- KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-@@ -649,11 +654,6 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
- KBUILD_CFLAGS	+= $(call cc-disable-warning, int-in-bool-context)
- KBUILD_CFLAGS	+= $(call cc-disable-warning, attribute-alias)
- 
--ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
--KBUILD_CFLAGS	+= $(call cc-option,-ffunction-sections,)
--KBUILD_CFLAGS	+= $(call cc-option,-fdata-sections,)
--endif
--
- ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
- KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
- else
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -81,6 +81,7 @@ config ARM
- 	select HAVE_UID16
- 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
- 	select IRQ_FORCED_THREADING
-+	select LD_DEAD_CODE_DATA_ELIMINATION
- 	select MODULES_USE_ELF_REL
- 	select NO_BOOTMEM
- 	select OF_EARLY_FLATTREE if OF
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -102,6 +102,7 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
- endif
-+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
- 
- # -fstack-protector-strong triggers protection checks in this code,
- # but it is being used too early to link to meaningful stack_chk logic.
---- a/arch/arm/kernel/vmlinux.lds.S
-+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -17,7 +17,7 @@
- #define PROC_INFO							\
- 	. = ALIGN(4);							\
- 	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
--	*(.proc.info.init)						\
-+	KEEP(*(.proc.info.init))					\
- 	VMLINUX_SYMBOL(__proc_info_end) = .;
- 
- #define HYPERVISOR_TEXT							\
-@@ -28,11 +28,11 @@
- #define IDMAP_TEXT							\
- 	ALIGN_FUNCTION();						\
- 	VMLINUX_SYMBOL(__idmap_text_start) = .;				\
--	*(.idmap.text)							\
-+	KEEP(*(.idmap.text))						\
- 	VMLINUX_SYMBOL(__idmap_text_end) = .;				\
- 	. = ALIGN(PAGE_SIZE);						\
- 	VMLINUX_SYMBOL(__hyp_idmap_text_start) = .;			\
--	*(.hyp.idmap.text)						\
-+	KEEP(*(.hyp.idmap.text))					\
- 	VMLINUX_SYMBOL(__hyp_idmap_text_end) = .;
- 
- #ifdef CONFIG_HOTPLUG_CPU
-@@ -105,7 +105,7 @@ SECTIONS
- 		_stext = .;		/* Text and read-only data	*/
- 			IDMAP_TEXT
- 			__exception_text_start = .;
--			*(.exception.text)
-+			KEEP(*(.exception.text))
- 			__exception_text_end = .;
- 			IRQENTRY_TEXT
- 			SOFTIRQENTRY_TEXT
-@@ -134,7 +134,7 @@ SECTIONS
- 	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- 		__start___ex_table = .;
- #ifdef CONFIG_MMU
--		*(__ex_table)
-+		KEEP(*(__ex_table))
- #endif
- 		__stop___ex_table = .;
- 	}
-@@ -146,12 +146,12 @@ SECTIONS
- 	. = ALIGN(8);
- 	.ARM.unwind_idx : {
- 		__start_unwind_idx = .;
--		*(.ARM.exidx*)
-+		KEEP(*(.ARM.exidx*))
- 		__stop_unwind_idx = .;
- 	}
- 	.ARM.unwind_tab : {
- 		__start_unwind_tab = .;
--		*(.ARM.extab*)
-+		KEEP(*(.ARM.extab*))
- 		__stop_unwind_tab = .;
- 	}
- #endif
-@@ -171,14 +171,14 @@ SECTIONS
- 	 */
- 	__vectors_start = .;
- 	.vectors 0xffff0000 : AT(__vectors_start) {
--		*(.vectors)
-+		KEEP(*(.vectors))
- 	}
- 	. = __vectors_start + SIZEOF(.vectors);
- 	__vectors_end = .;
- 
- 	__stubs_start = .;
- 	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {
--		*(.stubs)
-+		KEEP(*(.stubs))
- 	}
- 	. = __stubs_start + SIZEOF(.stubs);
- 	__stubs_end = .;
-@@ -194,24 +194,24 @@ SECTIONS
- 	}
- 	.init.arch.info : {
- 		__arch_info_begin = .;
--		*(.arch.info.init)
-+		KEEP(*(.arch.info.init))
- 		__arch_info_end = .;
- 	}
- 	.init.tagtable : {
- 		__tagtable_begin = .;
--		*(.taglist.init)
-+		KEEP(*(.taglist.init))
- 		__tagtable_end = .;
- 	}
- #ifdef CONFIG_SMP_ON_UP
- 	.init.smpalt : {
- 		__smpalt_begin = .;
--		*(.alt.smp.init)
-+		KEEP(*(.alt.smp.init))
- 		__smpalt_end = .;
- 	}
- #endif
- 	.init.pv_table : {
- 		__pv_table_begin = .;
--		*(.pv_table)
-+		KEEP(*(.pv_table))
- 		__pv_table_end = .;
- 	}
- 	.init.data : {
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -55,6 +55,7 @@ config MIPS
- 	select CLONE_BACKWARDS
- 	select HAVE_DEBUG_STACKOVERFLOW
- 	select HAVE_CC_STACKPROTECTOR
-+	select LD_DEAD_CODE_DATA_ELIMINATION
- 	select CPU_PM if CPU_IDLE
- 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
- 	select ARCH_BINFMT_ELF_STATE
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -71,7 +71,7 @@ SECTIONS
- 	/* Exception table for data bus errors */
- 	__dbe_table : {
- 		__start___dbe_table = .;
--		*(__dbe_table)
-+		KEEP(*(__dbe_table))
- 		__stop___dbe_table = .;
- 	}
- 
-@@ -121,7 +121,7 @@ SECTIONS
- 	. = ALIGN(4);
- 	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
- 		__mips_machines_start = .;
--		*(.mips.machines.init)
-+		KEEP(*(.mips.machines.init))
- 		__mips_machines_end = .;
- 	}
- 
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -105,7 +105,7 @@
- #ifdef CONFIG_FTRACE_MCOUNT_RECORD
- #define MCOUNT_REC()	. = ALIGN(8);				\
- 			VMLINUX_SYMBOL(__start_mcount_loc) = .; \
--			*(__mcount_loc)				\
-+			KEEP(*(__mcount_loc))			\
- 			VMLINUX_SYMBOL(__stop_mcount_loc) = .;
- #else
- #define MCOUNT_REC()
-@@ -113,7 +113,7 @@
- 
- #ifdef CONFIG_TRACE_BRANCH_PROFILING
- #define LIKELY_PROFILE()	VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \
--				*(_ftrace_annotated_branch)			      \
-+				KEEP(*(_ftrace_annotated_branch))		      \
- 				VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .;
- #else
- #define LIKELY_PROFILE()
-@@ -121,7 +121,7 @@
- 
- #ifdef CONFIG_PROFILE_ALL_BRANCHES
- #define BRANCH_PROFILE()	VMLINUX_SYMBOL(__start_branch_profile) = .;   \
--				*(_ftrace_branch)			      \
-+				KEEP(*(_ftrace_branch))			      \
- 				VMLINUX_SYMBOL(__stop_branch_profile) = .;
- #else
- #define BRANCH_PROFILE()
-@@ -130,7 +130,7 @@
- #ifdef CONFIG_KPROBES
- #define KPROBE_BLACKLIST()	. = ALIGN(8);				      \
- 				VMLINUX_SYMBOL(__start_kprobe_blacklist) = .; \
--				*(_kprobe_blacklist)			      \
-+				KEEP(*(_kprobe_blacklist))		      \
- 				VMLINUX_SYMBOL(__stop_kprobe_blacklist) = .;
- #else
- #define KPROBE_BLACKLIST()
-@@ -139,10 +139,10 @@
- #ifdef CONFIG_EVENT_TRACING
- #define FTRACE_EVENTS()	. = ALIGN(8);					\
- 			VMLINUX_SYMBOL(__start_ftrace_events) = .;	\
--			*(_ftrace_events)				\
-+			KEEP(*(_ftrace_events))				\
- 			VMLINUX_SYMBOL(__stop_ftrace_events) = .;	\
- 			VMLINUX_SYMBOL(__start_ftrace_enum_maps) = .;	\
--			*(_ftrace_enum_map)				\
-+			KEEP(*(_ftrace_enum_map))			\
- 			VMLINUX_SYMBOL(__stop_ftrace_enum_maps) = .;
- #else
- #define FTRACE_EVENTS()
-@@ -163,7 +163,7 @@
- #ifdef CONFIG_FTRACE_SYSCALLS
- #define TRACE_SYSCALLS() . = ALIGN(8);					\
- 			 VMLINUX_SYMBOL(__start_syscalls_metadata) = .;	\
--			 *(__syscalls_metadata)				\
-+			 KEEP(*(__syscalls_metadata))			\
- 			 VMLINUX_SYMBOL(__stop_syscalls_metadata) = .;
- #else
- #define TRACE_SYSCALLS()
-@@ -172,7 +172,7 @@
- #ifdef CONFIG_SERIAL_EARLYCON
- #define EARLYCON_TABLE() . = ALIGN(8);				\
- 			 VMLINUX_SYMBOL(__earlycon_table) = .;	\
--			 *(__earlycon_table)			\
-+			 KEEP(*(__earlycon_table))		\
- 			 VMLINUX_SYMBOL(__earlycon_table_end) = .;
- #else
- #define EARLYCON_TABLE()
-@@ -185,8 +185,8 @@
- #define _OF_TABLE_1(name)						\
- 	. = ALIGN(8);							\
- 	VMLINUX_SYMBOL(__##name##_of_table) = .;			\
--	*(__##name##_of_table)						\
--	*(__##name##_of_table_end)
-+	KEEP(*(__##name##_of_table))					\
-+	KEEP(*(__##name##_of_table_end))
- 
- #define CLKSRC_OF_TABLES()	OF_TABLE(CONFIG_CLKSRC_OF, clksrc)
- #define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip)
-@@ -209,7 +209,7 @@
- #define KERNEL_DTB()							\
- 	STRUCT_ALIGN();							\
- 	VMLINUX_SYMBOL(__dtb_start) = .;				\
--	*(.dtb.init.rodata)						\
-+	KEEP(*(.dtb.init.rodata))					\
- 	VMLINUX_SYMBOL(__dtb_end) = .;
- 
- /*
-@@ -227,16 +227,17 @@
- 	/* implement dynamic printk debug */				\
- 	. = ALIGN(8);                                                   \
- 	VMLINUX_SYMBOL(__start___jump_table) = .;                       \
--	*(__jump_table)                                                 \
-+	KEEP(*(__jump_table))                                           \
- 	VMLINUX_SYMBOL(__stop___jump_table) = .;                        \
- 	. = ALIGN(8);							\
- 	VMLINUX_SYMBOL(__start___verbose) = .;                          \
--	*(__verbose)                                                    \
-+	KEEP(*(__verbose))                                              \
- 	VMLINUX_SYMBOL(__stop___verbose) = .;				\
- 	LIKELY_PROFILE()		       				\
- 	BRANCH_PROFILE()						\
- 	TRACE_PRINTKS()							\
--	TRACEPOINT_STR()
-+	TRACEPOINT_STR()                                                \
-+	*(.data.[a-zA-Z_]*)
- 
- /*
-  * Data section helpers
-@@ -304,35 +305,35 @@
- 	/* PCI quirks */						\
- 	.pci_fixup        : AT(ADDR(.pci_fixup) - LOAD_OFFSET) {	\
- 		VMLINUX_SYMBOL(__start_pci_fixups_early) = .;		\
--		*(.pci_fixup_early)					\
-+		KEEP(*(.pci_fixup_early))				\
- 		VMLINUX_SYMBOL(__end_pci_fixups_early) = .;		\
- 		VMLINUX_SYMBOL(__start_pci_fixups_header) = .;		\
--		*(.pci_fixup_header)					\
-+		KEEP(*(.pci_fixup_header))				\
- 		VMLINUX_SYMBOL(__end_pci_fixups_header) = .;		\
- 		VMLINUX_SYMBOL(__start_pci_fixups_final) = .;		\
--		*(.pci_fixup_final)					\
-+		KEEP(*(.pci_fixup_final))				\
- 		VMLINUX_SYMBOL(__end_pci_fixups_final) = .;		\
- 		VMLINUX_SYMBOL(__start_pci_fixups_enable) = .;		\
--		*(.pci_fixup_enable)					\
-+		KEEP(*(.pci_fixup_enable))				\
- 		VMLINUX_SYMBOL(__end_pci_fixups_enable) = .;		\
- 		VMLINUX_SYMBOL(__start_pci_fixups_resume) = .;		\
--		*(.pci_fixup_resume)					\
-+		KEEP(*(.pci_fixup_resume))				\
- 		VMLINUX_SYMBOL(__end_pci_fixups_resume) = .;		\
- 		VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .;	\
--		*(.pci_fixup_resume_early)				\
-+		KEEP(*(.pci_fixup_resume_early))			\
- 		VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .;	\
- 		VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .;		\
--		*(.pci_fixup_suspend)					\
-+		KEEP(*(.pci_fixup_suspend))				\
- 		VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .;		\
- 		VMLINUX_SYMBOL(__start_pci_fixups_suspend_late) = .;	\
--		*(.pci_fixup_suspend_late)				\
-+		KEEP(*(.pci_fixup_suspend_late))			\
- 		VMLINUX_SYMBOL(__end_pci_fixups_suspend_late) = .;	\
- 	}								\
- 									\
- 	/* Built-in firmware blobs */					\
- 	.builtin_fw        : AT(ADDR(.builtin_fw) - LOAD_OFFSET) {	\
- 		VMLINUX_SYMBOL(__start_builtin_fw) = .;			\
--		*(.builtin_fw)						\
-+		KEEP(*(.builtin_fw))					\
- 		VMLINUX_SYMBOL(__end_builtin_fw) = .;			\
- 	}								\
- 									\
-@@ -410,7 +411,7 @@
- 									\
- 	/* Kernel symbol table: strings */				\
-         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
--		KEEP(*(__ksymtab_strings))				\
-+		*(__ksymtab_strings)					\
- 	}								\
- 									\
- 	/* __*init sections */						\
-@@ -423,14 +424,14 @@
- 	/* Built-in module parameters. */				\
- 	__param : AT(ADDR(__param) - LOAD_OFFSET) {			\
- 		VMLINUX_SYMBOL(__start___param) = .;			\
--		*(__param)						\
-+		KEEP(*(__param))					\
- 		VMLINUX_SYMBOL(__stop___param) = .;			\
- 	}								\
- 									\
- 	/* Built-in module versions. */					\
- 	__modver : AT(ADDR(__modver) - LOAD_OFFSET) {			\
- 		VMLINUX_SYMBOL(__start___modver) = .;			\
--		*(__modver)						\
-+		KEEP(*(__modver))					\
- 		VMLINUX_SYMBOL(__stop___modver) = .;			\
- 		. = ALIGN((align));					\
- 		VMLINUX_SYMBOL(__end_rodata) = .;			\
-@@ -496,7 +497,7 @@
- #define ENTRY_TEXT							\
- 		ALIGN_FUNCTION();					\
- 		VMLINUX_SYMBOL(__entry_text_start) = .;			\
--		*(.entry.text)						\
-+		KEEP(*(.entry.text))					\
- 		VMLINUX_SYMBOL(__entry_text_end) = .;
- 
- #if defined(CONFIG_FUNCTION_GRAPH_TRACER) || defined(CONFIG_KASAN)
-@@ -534,7 +535,7 @@
- 	. = ALIGN(align);						\
- 	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {		\
- 		VMLINUX_SYMBOL(__start___ex_table) = .;			\
--		*(__ex_table)						\
-+		KEEP(*(__ex_table))						\
- 		VMLINUX_SYMBOL(__stop___ex_table) = .;			\
- 	}
- 
-@@ -550,9 +551,9 @@
- #ifdef CONFIG_CONSTRUCTORS
- #define KERNEL_CTORS()	. = ALIGN(8);			   \
- 			VMLINUX_SYMBOL(__ctors_start) = .; \
--			*(.ctors)			   \
-+			KEEP(*(.ctors))			   \
- 			*(SORT(.init_array.*))		   \
--			*(.init_array)			   \
-+			KEEP(*(.init_array))		   \
- 			VMLINUX_SYMBOL(__ctors_end) = .;
- #else
- #define KERNEL_CTORS()
-@@ -609,7 +610,7 @@
- #define SBSS(sbss_align)						\
- 	. = ALIGN(sbss_align);						\
- 	.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {				\
--		*(.sbss)						\
-+		*(.sbss .sbss.*)					\
- 		*(.scommon)						\
- 	}
- 
-@@ -676,7 +677,7 @@
- 	. = ALIGN(8);							\
- 	__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) {		\
- 		VMLINUX_SYMBOL(__start___bug_table) = .;		\
--		*(__bug_table)						\
-+		KEEP(*(__bug_table))					\
- 		VMLINUX_SYMBOL(__stop___bug_table) = .;			\
- 	}
- #else
-@@ -688,7 +689,7 @@
- 	. = ALIGN(4);							\
- 	.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {		\
- 		VMLINUX_SYMBOL(__tracedata_start) = .;			\
--		*(.tracedata)						\
-+		KEEP(*(.tracedata))					\
- 		VMLINUX_SYMBOL(__tracedata_end) = .;			\
- 	}
- #else
-@@ -705,7 +706,7 @@
- #define INIT_SETUP(initsetup_align)					\
- 		. = ALIGN(initsetup_align);				\
- 		VMLINUX_SYMBOL(__setup_start) = .;			\
--		*(.init.setup)						\
-+		KEEP(*(.init.setup))					\
- 		VMLINUX_SYMBOL(__setup_end) = .;
- 
- #define INIT_CALLS_LEVEL(level)						\
diff --git a/target/linux/generic/hack-4.9/221-module_exports.patch b/target/linux/generic/hack-4.9/221-module_exports.patch
deleted file mode 100644
index f357d73d6a..0000000000
--- a/target/linux/generic/hack-4.9/221-module_exports.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From b14784e7883390c20ed3ff904892255404a5914b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:05:53 +0200
-Subject: add an optional config option for stripping all unnecessary symbol exports from the kernel image
-
-lede-commit: bb5a40c64b7c4f4848509fa0a6625055fc9e66cc
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/asm-generic/vmlinux.lds.h | 18 +++++++++++++++---
- include/linux/export.h            |  9 ++++++++-
- scripts/Makefile.build            |  2 +-
- 3 files changed, 24 insertions(+), 5 deletions(-)
-
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -54,6 +54,16 @@
- #define LOAD_OFFSET 0
- #endif
- 
-+#ifndef SYMTAB_KEEP
-+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
-+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
-+#endif
-+
-+#ifndef SYMTAB_DISCARD
-+#define SYMTAB_DISCARD
-+#define SYMTAB_DISCARD_GPL
-+#endif
-+
- #include <linux/export.h>
- 
- /* Align . to a 8 byte boundary equals to maximum function alignment. */
-@@ -342,14 +352,14 @@
- 	/* Kernel symbol table: Normal symbols */			\
- 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
- 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
--		KEEP(*(SORT(___ksymtab+*)))				\
-+		SYMTAB_KEEP						\
- 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
- 	}								\
- 									\
- 	/* Kernel symbol table: GPL-only symbols */			\
- 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
- 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
--		KEEP(*(SORT(___ksymtab_gpl+*)))				\
-+		SYMTAB_KEEP_GPL						\
- 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
- 	}								\
- 									\
-@@ -411,7 +421,7 @@
- 									\
- 	/* Kernel symbol table: strings */				\
-         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
--		*(__ksymtab_strings)					\
-+		*(__ksymtab_strings+*)					\
- 	}								\
- 									\
- 	/* __*init sections */						\
-@@ -763,6 +773,8 @@
- 	EXIT_TEXT							\
- 	EXIT_DATA							\
- 	EXIT_CALL							\
-+	SYMTAB_DISCARD							\
-+	SYMTAB_DISCARD_GPL						\
- 	*(.discard)							\
- 	*(.discard.*)							\
- 	}
---- a/include/linux/export.h
-+++ b/include/linux/export.h
-@@ -53,12 +53,19 @@ extern struct module __this_module;
- #define __CRC_SYMBOL(sym, sec)
- #endif
- 
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(sym)
-+#else
-+#define __EXPORT_SUFFIX(sym) "+" #sym
-+#endif
-+
- /* For every exported symbol, place a struct in the __ksymtab section */
- #define ___EXPORT_SYMBOL(sym, sec)					\
- 	extern typeof(sym) sym;						\
- 	__CRC_SYMBOL(sym, sec)						\
- 	static const char __kstrtab_##sym[]				\
--	__attribute__((section("__ksymtab_strings"), aligned(1)))	\
-+	__attribute__((section("__ksymtab_strings"			\
-+	  __EXPORT_SUFFIX(sym)), aligned(1)))				\
- 	= VMLINUX_SYMBOL_STR(sym);					\
- 	static const struct kernel_symbol __ksymtab_##sym		\
- 	__used								\
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -409,7 +409,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $(
- # Linker scripts preprocessor (.lds.S -> .lds)
- # ---------------------------------------------------------------------------
- quiet_cmd_cpp_lds_S = LDS     $@
--      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
-+      cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -C -U$(ARCH) \
- 	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
- 
- $(obj)/%.lds: $(src)/%.lds.S FORCE
diff --git a/target/linux/generic/hack-4.9/230-openwrt_lzma_options.patch b/target/linux/generic/hack-4.9/230-openwrt_lzma_options.patch
deleted file mode 100644
index b3c444265d..0000000000
--- a/target/linux/generic/hack-4.9/230-openwrt_lzma_options.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From b3d00b452467f621317953d9e4c6f9ae8dcfd271 Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:06:55 +0200
-Subject: use the openwrt lzma options for now
-
-lede-commit: 548de949f392049420a6a1feeef118b30ab8ea8c
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- lib/decompress.c              |  1 +
- scripts/Makefile.lib          |  2 +-
- scripts/gen_initramfs_list.sh | 10 +++++-----
- 3 files changed, 7 insertions(+), 6 deletions(-)
-
---- a/lib/decompress.c
-+++ b/lib/decompress.c
-@@ -48,6 +48,7 @@ static const struct compress_format comp
- 	{ {0x1f, 0x9e}, "gzip", gunzip },
- 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
- 	{ {0x5d, 0x00}, "lzma", unlzma },
-+	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
- 	{ {0xfd, 0x37}, "xz", unxz },
- 	{ {0x89, 0x4c}, "lzo", unlzo },
- 	{ {0x02, 0x21}, "lz4", unlz4 },
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -344,7 +344,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
- 
- quiet_cmd_lzma = LZMA    $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
--	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- 	(rm -f $@ ; false)
- 
- quiet_cmd_lzo = LZO     $@
---- a/scripts/gen_initramfs_list.sh
-+++ b/scripts/gen_initramfs_list.sh
-@@ -229,7 +229,7 @@ cpio_list=
- output="/dev/stdout"
- output_file=""
- is_cpio_compressed=
--compr="gzip -n -9 -f"
-+compr="gzip -n -9 -f -"
- 
- arg="$1"
- case "$arg" in
-@@ -245,13 +245,13 @@ case "$arg" in
- 		output=${cpio_list}
- 		echo "$output_file" | grep -q "\.gz$" \
-                 && [ -x "`which gzip 2> /dev/null`" ] \
--                && compr="gzip -n -9 -f"
-+                && compr="gzip -n -9 -f -"
- 		echo "$output_file" | grep -q "\.bz2$" \
-                 && [ -x "`which bzip2 2> /dev/null`" ] \
--                && compr="bzip2 -9 -f"
-+                && compr="bzip2 -9 -f -"
- 		echo "$output_file" | grep -q "\.lzma$" \
-                 && [ -x "`which lzma 2> /dev/null`" ] \
--                && compr="lzma -9 -f"
-+                && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
- 		echo "$output_file" | grep -q "\.xz$" \
-                 && [ -x "`which xz 2> /dev/null`" ] \
-                 && compr="xz --check=crc32 --lzma2=dict=1MiB"
-@@ -318,7 +318,7 @@ if [ ! -z ${output_file} ]; then
- 	if [ "${is_cpio_compressed}" = "compressed" ]; then
- 		cat ${cpio_tfile} > ${output_file}
- 	else
--		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
-+		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
- 		|| (rm -f ${output_file} ; false)
- 	fi
- 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
diff --git a/target/linux/generic/hack-4.9/250-netfilter_depends.patch b/target/linux/generic/hack-4.9/250-netfilter_depends.patch
deleted file mode 100644
index f6e1c1d303..0000000000
--- a/target/linux/generic/hack-4.9/250-netfilter_depends.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: hack: net: remove bogus netfilter dependencies
-
-lede-commit: 589d2a377dee27d206fc3725325309cf649e4df6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/Kconfig | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -218,7 +218,6 @@ config NF_CONNTRACK_FTP
- 
- config NF_CONNTRACK_H323
- 	tristate "H.323 protocol support"
--	depends on IPV6 || IPV6=n
- 	depends on NETFILTER_ADVANCED
- 	help
- 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -968,7 +967,6 @@ config NETFILTER_XT_TARGET_SECMARK
- 
- config NETFILTER_XT_TARGET_TCPMSS
- 	tristate '"TCPMSS" target support'
--	depends on IPV6 || IPV6=n
- 	default m if NETFILTER_ADVANCED=n
- 	---help---
- 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/hack-4.9/251-sound_kconfig.patch b/target/linux/generic/hack-4.9/251-sound_kconfig.patch
deleted file mode 100644
index d01bdfb9b3..0000000000
--- a/target/linux/generic/hack-4.9/251-sound_kconfig.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:09:21 +0200
-Subject: kconfig: owrt specifc dependencies
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- crypto/Kconfig        | 10 +++++-----
- drivers/bcma/Kconfig  |  1 +
- drivers/ssb/Kconfig   |  3 ++-
- lib/Kconfig           |  8 ++++----
- net/netfilter/Kconfig |  2 +-
- net/wireless/Kconfig  | 17 ++++++++++-------
- sound/core/Kconfig    |  4 ++--
- 7 files changed, 25 insertions(+), 20 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -32,7 +32,7 @@ config CRYPTO_FIPS
- 	  this is.
- 
- config CRYPTO_ALGAPI
--	tristate
-+	tristate "ALGAPI"
- 	select CRYPTO_ALGAPI2
- 	help
- 	  This option provides the API for cryptographic algorithms.
-@@ -41,7 +41,7 @@ config CRYPTO_ALGAPI2
- 	tristate
- 
- config CRYPTO_AEAD
--	tristate
-+	tristate "AEAD"
- 	select CRYPTO_AEAD2
- 	select CRYPTO_ALGAPI
- 
-@@ -52,7 +52,7 @@ config CRYPTO_AEAD2
- 	select CRYPTO_RNG2
- 
- config CRYPTO_BLKCIPHER
--	tristate
-+	tristate "BLKCIPHER"
- 	select CRYPTO_BLKCIPHER2
- 	select CRYPTO_ALGAPI
- 
-@@ -63,7 +63,7 @@ config CRYPTO_BLKCIPHER2
- 	select CRYPTO_WORKQUEUE
- 
- config CRYPTO_HASH
--	tristate
-+	tristate "HASH"
- 	select CRYPTO_HASH2
- 	select CRYPTO_ALGAPI
- 
-@@ -72,7 +72,7 @@ config CRYPTO_HASH2
- 	select CRYPTO_ALGAPI2
- 
- config CRYPTO_RNG
--	tristate
-+	tristate "RNG"
- 	select CRYPTO_RNG2
- 	select CRYPTO_ALGAPI
- 
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -17,6 +17,7 @@ config BCMA
- config BCMA_BLOCKIO
- 	bool
- 	depends on BCMA
-+	default y
- 
- config BCMA_HOST_PCI_POSSIBLE
- 	bool
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -29,6 +29,7 @@ config SSB_SPROM
- config SSB_BLOCKIO
- 	bool
- 	depends on SSB
-+	default y
- 
- config SSB_PCIHOST_POSSIBLE
- 	bool
-@@ -49,7 +50,7 @@ config SSB_PCIHOST
- config SSB_B43_PCI_BRIDGE
- 	bool
- 	depends on SSB_PCIHOST
--	default n
-+	default y
- 
- config SSB_PCMCIAHOST_POSSIBLE
- 	bool
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -340,16 +340,16 @@ config BCH_CONST_T
- # Textsearch support is select'ed if needed
- #
- config TEXTSEARCH
--	bool
-+	boolean	"Textsearch support"
- 
- config TEXTSEARCH_KMP
--	tristate
-+	tristate "Textsearch KMP"
- 
- config TEXTSEARCH_BM
--	tristate
-+	tristate "Textsearch BM"
- 
- config TEXTSEARCH_FSM
--	tristate
-+	tristate "Textsearch FSM"
- 
- config BTREE
- 	bool
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -10,7 +10,7 @@ config NETFILTER_INGRESS
- 	  infrastructure.
- 
- config NETFILTER_NETLINK
--	tristate
-+	tristate "Netfilter NFNETLINK interface"
- 
- config NETFILTER_NETLINK_ACCT
- tristate "Netfilter NFACCT over NFNETLINK interface"
---- a/net/wireless/Kconfig
-+++ b/net/wireless/Kconfig
-@@ -1,5 +1,5 @@
- config WIRELESS_EXT
--	bool
-+	bool "Wireless extensions"
- 
- config WEXT_CORE
- 	def_bool y
-@@ -11,10 +11,10 @@ config WEXT_PROC
- 	depends on WEXT_CORE
- 
- config WEXT_SPY
--	bool
-+	bool "WEXT_SPY"
- 
- config WEXT_PRIV
--	bool
-+	bool "WEXT_PRIV"
- 
- config CFG80211
- 	tristate "cfg80211 - wireless configuration API"
-@@ -188,7 +188,7 @@ config CFG80211_WEXT_EXPORT
- 	  wext compatibility symbols to be exported.
- 
- config LIB80211
--	tristate
-+	tristate "LIB80211"
- 	default n
- 	help
- 	  This options enables a library of common routines used
-@@ -197,13 +197,16 @@ config LIB80211
- 	  Drivers should select this themselves if needed.
- 
- config LIB80211_CRYPT_WEP
--	tristate
-+	tristate "LIB80211_CRYPT_WEP"
-+	select LIB80211
- 
- config LIB80211_CRYPT_CCMP
--	tristate
-+	tristate "LIB80211_CRYPT_CCMP"
-+	select LIB80211
- 
- config LIB80211_CRYPT_TKIP
--	tristate
-+	tristate "LIB80211_CRYPT_TKIP"
-+	select LIB80211
- 
- config LIB80211_DEBUG
- 	bool "lib80211 debugging messages"
---- a/sound/core/Kconfig
-+++ b/sound/core/Kconfig
-@@ -16,13 +16,13 @@ config SND_DMAENGINE_PCM
- 	tristate
- 
- config SND_HWDEP
--	tristate
-+	tristate "Sound hardware support"
- 
- config SND_RAWMIDI
- 	tristate
- 
- config SND_COMPRESS_OFFLOAD
--	tristate
-+	tristate "Compression offloading support"
- 
- config SND_JACK
- 	bool
diff --git a/target/linux/generic/hack-4.9/259-regmap_dynamic.patch b/target/linux/generic/hack-4.9/259-regmap_dynamic.patch
deleted file mode 100644
index 237c2099e9..0000000000
--- a/target/linux/generic/hack-4.9/259-regmap_dynamic.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 811d9e2268a62b830cfe93cd8bc929afcb8b198b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:12:38 +0200
-Subject: kernel: move regmap bloat out of the kernel image if it is only being used in modules
-
-lede-commit: 96f39119815028073583e4fca3a9c5fe9141e998
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/regmap/Kconfig  | 15 ++++++++++-----
- drivers/base/regmap/Makefile | 12 ++++++++----
- drivers/base/regmap/regmap.c |  3 +++
- include/linux/regmap.h       |  2 +-
- 4 files changed, 22 insertions(+), 10 deletions(-)
-
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -3,9 +3,8 @@
- # subsystems should select the appropriate symbols.
- 
- config REGMAP
--	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
- 	select IRQ_DOMAIN if REGMAP_IRQ
--	bool
-+	tristate
- 
- config REGCACHE_COMPRESSED
- 	select LZO_COMPRESS
-@@ -17,18 +16,24 @@ config REGMAP_AC97
- 
- config REGMAP_I2C
- 	tristate
-+	select REGMAP
- 	depends on I2C
- 
- config REGMAP_SPI
- 	tristate
-+	select REGMAP
-+	depends on SPI_MASTER
- 	depends on SPI
- 
- config REGMAP_SPMI
-+	select REGMAP
- 	tristate
- 	depends on SPMI
- 
- config REGMAP_MMIO
- 	tristate
-+	select REGMAP
- 
- config REGMAP_IRQ
-+	select REGMAP
- 	bool
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -1,10 +1,14 @@
- # For include/trace/define_trace.h to include trace.h
- CFLAGS_regmap.o := -I$(src)
- 
--obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
--obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
--obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
-+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o
-+ifdef CONFIG_DEBUG_FS
-+regmap-core-objs += regmap-debugfs.o
-+endif
-+ifdef CONFIG_REGCACHE_COMPRESSED
-+regmap-core-objs += regcache-lzo.o
-+endif
-+obj-$(CONFIG_REGMAP) += regmap-core.o
- obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
- obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
---- a/drivers/base/regmap/regmap.c
-+++ b/drivers/base/regmap/regmap.c
-@@ -13,6 +13,7 @@
- #include <linux/device.h>
- #include <linux/slab.h>
- #include <linux/export.h>
-+#include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/of.h>
-@@ -2913,3 +2914,5 @@ static int __init regmap_initcall(void)
- 	return 0;
- }
- postcore_initcall(regmap_initcall);
-+
-+MODULE_LICENSE("GPL");
---- a/include/linux/regmap.h
-+++ b/include/linux/regmap.h
-@@ -135,7 +135,7 @@ struct reg_sequence {
- 	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
- })
- 
--#ifdef CONFIG_REGMAP
-+#if IS_ENABLED(CONFIG_REGMAP)
- 
- enum regmap_endian {
- 	/* Unspecified -> 0 -> Backwards compatible default */
diff --git a/target/linux/generic/hack-4.9/260-crypto_test_dependencies.patch b/target/linux/generic/hack-4.9/260-crypto_test_dependencies.patch
deleted file mode 100644
index f2570f5988..0000000000
--- a/target/linux/generic/hack-4.9/260-crypto_test_dependencies.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From fd1799b0bf5efa46dd3e6dfbbf3955564807e508 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:12:51 +0200
-Subject: kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
-
-Reduces kernel size after LZMA by about 5k on MIPS
-
-lede-commit: 044c316167e076479a344c59905e5b435b84a77f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- crypto/Kconfig   | 13 ++++++-------
- crypto/algboss.c |  4 ++++
- 2 files changed, 10 insertions(+), 7 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -132,12 +132,12 @@ config CRYPTO_MANAGER
- 	  cbc(aes).
- 
- config CRYPTO_MANAGER2
--	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
--	select CRYPTO_AEAD2
--	select CRYPTO_HASH2
--	select CRYPTO_BLKCIPHER2
--	select CRYPTO_AKCIPHER2
--	select CRYPTO_KPP2
-+	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS)
-+	select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_BLKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_KPP2 if !CRYPTO_MANAGER_DISABLE_TESTS
- 
- config CRYPTO_USER
- 	tristate "Userspace cryptographic algorithm configuration"
-@@ -150,7 +150,6 @@ config CRYPTO_USER
- config CRYPTO_MANAGER_DISABLE_TESTS
- 	bool "Disable run-time self tests"
- 	default y
--	depends on CRYPTO_MANAGER2
- 	help
- 	  Disable run-time self tests that normally take place at
- 	  algorithm registration.
---- a/crypto/algboss.c
-+++ b/crypto/algboss.c
-@@ -248,12 +248,16 @@ static int cryptomgr_schedule_test(struc
- 	type = alg->cra_flags;
- 
- 	/* This piece of crap needs to disappear into per-type test hooks. */
-+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
-+	type |= CRYPTO_ALG_TESTED;
-+#else
- 	if (!((type ^ CRYPTO_ALG_TYPE_BLKCIPHER) &
- 	      CRYPTO_ALG_TYPE_BLKCIPHER_MASK) && !(type & CRYPTO_ALG_GENIV) &&
- 	    ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) ==
- 	     CRYPTO_ALG_TYPE_BLKCIPHER ? alg->cra_blkcipher.ivsize :
- 					 alg->cra_ablkcipher.ivsize))
- 		type |= CRYPTO_ALG_TESTED;
-+#endif
- 
- 	param->type = type;
- 
diff --git a/target/linux/generic/hack-4.9/280-rfkill-stubs.patch b/target/linux/generic/hack-4.9/280-rfkill-stubs.patch
deleted file mode 100644
index b4dcb45cf0..0000000000
--- a/target/linux/generic/hack-4.9/280-rfkill-stubs.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 236c1acdfef5958010ac9814a9872e0a46fd78ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:13:44 +0200
-Subject: rfkill: add fake rfkill support
-
-allow building of modules depending on RFKILL even if RFKILL is not enabled.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- include/linux/rfkill.h |  2 +-
- net/Makefile           |  2 +-
- net/rfkill/Kconfig     | 14 +++++++++-----
- net/rfkill/Makefile    |  2 +-
- 4 files changed, 12 insertions(+), 8 deletions(-)
-
---- a/include/linux/rfkill.h
-+++ b/include/linux/rfkill.h
-@@ -64,7 +64,7 @@ struct rfkill_ops {
- 	int	(*set_block)(void *data, bool blocked);
- };
- 
--#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-+#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE)
- /**
-  * rfkill_alloc - allocate rfkill structure
-  * @name: name of the struct -- the string is not copied internally
---- a/net/Makefile
-+++ b/net/Makefile
-@@ -51,7 +51,7 @@ obj-$(CONFIG_MAC80211)		+= mac80211/
- obj-$(CONFIG_TIPC)		+= tipc/
- obj-$(CONFIG_NETLABEL)		+= netlabel/
- obj-$(CONFIG_IUCV)		+= iucv/
--obj-$(CONFIG_RFKILL)		+= rfkill/
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill/
- obj-$(CONFIG_NET_9P)		+= 9p/
- obj-$(CONFIG_CAIF)		+= caif/
- ifneq ($(CONFIG_DCB),)
---- a/net/rfkill/Kconfig
-+++ b/net/rfkill/Kconfig
-@@ -1,7 +1,11 @@
- #
- # RF switch subsystem configuration
- #
--menuconfig RFKILL
-+config RFKILL
-+	bool
-+	default y
-+
-+menuconfig RFKILL_FULL
- 	tristate "RF switch subsystem support"
- 	help
- 	  Say Y here if you want to have control over RF switches
-@@ -13,19 +17,19 @@ menuconfig RFKILL
- # LED trigger support
- config RFKILL_LEDS
- 	bool
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
- 	default y
- 
- config RFKILL_INPUT
- 	bool "RF switch input support" if EXPERT
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on INPUT = y || RFKILL = INPUT
- 	default y if !EXPERT
- 
- config RFKILL_REGULATOR
- 	tristate "Generic rfkill regulator driver"
--	depends on RFKILL || !RFKILL
-+	depends on RFKILL_FULL || !RFKILL_FULL
- 	depends on REGULATOR
- 	help
-           This options enable controlling radio transmitters connected to
-@@ -36,7 +40,7 @@ config RFKILL_REGULATOR
- 
- config RFKILL_GPIO
- 	tristate "GPIO RFKILL driver"
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on GPIOLIB || COMPILE_TEST
- 	default n
- 	help
---- a/net/rfkill/Makefile
-+++ b/net/rfkill/Makefile
-@@ -4,6 +4,6 @@
- 
- rfkill-y			+= core.o
- rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
--obj-$(CONFIG_RFKILL)		+= rfkill.o
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill.o
- obj-$(CONFIG_RFKILL_REGULATOR)	+= rfkill-regulator.o
- obj-$(CONFIG_RFKILL_GPIO)	+= rfkill-gpio.o
diff --git a/target/linux/generic/hack-4.9/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch b/target/linux/generic/hack-4.9/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
deleted file mode 100644
index 690b30ee9b..0000000000
--- a/target/linux/generic/hack-4.9/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Date: Fri, 7 Jun 2013 18:35:22 -0500
-Subject: MIPS: r4k_cache: use more efficient cache blast
-
-Optimize the compiler output for larger cache blast cases that are
-common for DMA-based networking.
-
-Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -665,16 +665,48 @@ static inline void prot##extra##blast_##
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
-+	unsigned long lsize_2 = lsize * 2;				\
-+	unsigned long lsize_3 = lsize * 3;				\
-+	unsigned long lsize_4 = lsize * 4;				\
-+	unsigned long lsize_5 = lsize * 5;				\
-+	unsigned long lsize_6 = lsize * 6;				\
-+	unsigned long lsize_7 = lsize * 7;				\
-+	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
--	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
-+	int lines = (aend - addr) / lsize;				\
- 									\
- 	__##pfx##flush_prologue						\
- 									\
--	while (1) {							\
-+	while (lines >= 8) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		prot##cache_op(hitop, addr + lsize_4);			\
-+		prot##cache_op(hitop, addr + lsize_5);			\
-+		prot##cache_op(hitop, addr + lsize_6);			\
-+		prot##cache_op(hitop, addr + lsize_7);			\
-+		addr += lsize_8;					\
-+		lines -= 8;						\
-+	}								\
-+									\
-+	if (lines & 0x4) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		addr += lsize_4;					\
-+	}								\
-+									\
-+	if (lines & 0x2) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		addr += lsize_2;					\
-+	}								\
-+									\
-+	if (lines & 0x1) {						\
- 		prot##cache_op(hitop, addr);				\
--		if (addr == aend)					\
--			break;						\
--		addr += lsize;						\
- 	}								\
- 									\
- 	__##pfx##flush_epilogue						\
diff --git a/target/linux/generic/hack-4.9/301-mips_image_cmdline_hack.patch b/target/linux/generic/hack-4.9/301-mips_image_cmdline_hack.patch
deleted file mode 100644
index 9bcd2a4401..0000000000
--- a/target/linux/generic/hack-4.9/301-mips_image_cmdline_hack.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: hack: kernel: add generic image_cmdline hack to MIPS targets
-
-lede-commit: d59f5b3a987a48508257a0ddbaeadc7909f9f976
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/Kconfig       | 4 ++++
- arch/mips/kernel/head.S | 6 ++++++
- 2 files changed, 10 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1159,6 +1159,10 @@ config SYNC_R4K
- config MIPS_MACHINE
- 	def_bool n
- 
-+config IMAGE_CMDLINE_HACK
-+	bool "OpenWrt specific image command line hack"
-+	default n
-+
- config NO_IOPORT_MAP
- 	def_bool n
- 
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -79,6 +79,12 @@ FEXPORT(__kernel_entry)
- 	j	kernel_entry
- #endif
- 
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+	.ascii	"CMDLINE:"
-+EXPORT(__image_cmdline)
-+	.fill	0x400
-+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-+
- 	__REF
- 
- NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/hack-4.9/321-powerpc_crtsavres_prereq.patch b/target/linux/generic/hack-4.9/321-powerpc_crtsavres_prereq.patch
deleted file mode 100644
index 8c6ed8c207..0000000000
--- a/target/linux/generic/hack-4.9/321-powerpc_crtsavres_prereq.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 107c0964cb8db7ca28ac5199426414fdab3c274d Mon Sep 17 00:00:00 2001
-From: "Alexandros C. Couloumbis" <alex@ozo.com>
-Date: Fri, 7 Jul 2017 17:14:51 +0200
-Subject: hack: arch: powerpc: drop register save/restore library from modules
-
-Upstream GCC uses a libgcc function for saving/restoring registers. This
-makes the code bigger, and upstream kernels need to carry that function
-for every single kernel module. Our GCC is patched to avoid those
-references, so we can drop the extra bloat for modules.
-
-lede-commit: e8e1084654f50904e6bf77b70b2de3f137d7b3ec
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- arch/powerpc/Makefile | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -188,7 +188,6 @@ else
- CHECKFLAGS	+= -D__LITTLE_ENDIAN__
- endif
- 
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
- 
- ifeq ($(CONFIG_476FPE_ERR46),y)
- 	KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
diff --git a/target/linux/generic/hack-4.9/531-debloat_lzma.patch b/target/linux/generic/hack-4.9/531-debloat_lzma.patch
deleted file mode 100644
index 2e453cc2f2..0000000000
--- a/target/linux/generic/hack-4.9/531-debloat_lzma.patch
+++ /dev/null
@@ -1,1040 +0,0 @@
-From 3fd297761ac246c54d7723c57fca95c112b99465 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:15:44 +0200
-Subject: lzma: de-bloat the lzma library used by jffs2
-
-lede-commit: 3fd1dd08fbcbb78b34efefd32c3032e5c99108d6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/lzma/LzFind.h  |  17 ---
- include/linux/lzma/LzmaDec.h | 101 ---------------
- include/linux/lzma/LzmaEnc.h |  20 ---
- lib/lzma/LzFind.c            | 287 ++++---------------------------------------
- lib/lzma/LzmaDec.c           |  86 +------------
- lib/lzma/LzmaEnc.c           | 172 ++------------------------
- 6 files changed, 42 insertions(+), 641 deletions(-)
-
---- a/include/linux/lzma/LzFind.h
-+++ b/include/linux/lzma/LzFind.h
-@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
- 
- #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
- 
--int MatchFinder_NeedMove(CMatchFinder *p);
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
--void MatchFinder_MoveBlock(CMatchFinder *p);
--void MatchFinder_ReadIfRequired(CMatchFinder *p);
--
- void MatchFinder_Construct(CMatchFinder *p);
- 
- /* Conditions:
-@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
-     UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-     ISzAlloc *alloc);
- void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
--    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
--    UInt32 *distances, UInt32 maxLen);
- 
- /*
- Conditions:
-@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
- 
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
- 
--void MatchFinder_Init(CMatchFinder *p);
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--
- #ifdef __cplusplus
- }
- #endif
---- a/include/linux/lzma/LzmaDec.h
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
-   UInt32 dicSize;
- } CLzmaProps;
- 
--/* LzmaProps_Decode - decodes properties
--Returns:
--  SZ_OK
--  SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
--
- 
- /* ---------- LZMA Decoder state ---------- */
- 
-@@ -70,8 +62,6 @@ typedef struct
- 
- #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
- 
--void LzmaDec_Init(CLzmaDec *p);
--
- /* There are two types of LZMA streams:
-      0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-      1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-@@ -108,97 +98,6 @@ typedef enum
- 
- /* ELzmaStatus is used only as output value for function call */
- 
--
--/* ---------- Interfaces ---------- */
--
--/* There are 3 levels of interfaces:
--     1) Dictionary Interface
--     2) Buffer Interface
--     3) One Call Interface
--   You can select any of these interfaces, but don't mix functions from different
--   groups for same object. */
--
--
--/* There are two variants to allocate state for Dictionary Interface:
--     1) LzmaDec_Allocate / LzmaDec_Free
--     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
--   You can use variant 2, if you set dictionary buffer manually.
--   For Buffer Interface you must always use variant 1.
--
--LzmaDec_Allocate* can return:
--  SZ_OK
--  SZ_ERROR_MEM         - Memory allocation error
--  SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--   
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
--
--SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
--
--/* ---------- Dictionary Interface ---------- */
--
--/* You can use it, if you want to eliminate the overhead for data copying from
--   dictionary to some other external buffer.
--   You must work with CLzmaDec variables directly in this interface.
--
--   STEPS:
--     LzmaDec_Constr()
--     LzmaDec_Allocate()
--     for (each new stream)
--     {
--       LzmaDec_Init()
--       while (it needs more decompression)
--       {
--         LzmaDec_DecodeToDic()
--         use data from CLzmaDec::dic and update CLzmaDec::dicPos
--       }
--     }
--     LzmaDec_Free()
--*/
--
--/* LzmaDec_DecodeToDic
--   
--   The decoding to internal dictionary buffer (CLzmaDec::dic).
--   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
--
--finishMode:
--  It has meaning only if the decoding reaches output limit (dicLimit).
--  LZMA_FINISH_ANY - Decode just dicLimit bytes.
--  LZMA_FINISH_END - Stream must be finished after dicLimit.
--
--Returns:
--  SZ_OK
--    status:
--      LZMA_STATUS_FINISHED_WITH_MARK
--      LZMA_STATUS_NOT_FINISHED
--      LZMA_STATUS_NEEDS_MORE_INPUT
--      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
--  SZ_ERROR_DATA - Data error
--*/
--
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
--    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
--/* ---------- Buffer Interface ---------- */
--
--/* It's zlib-like interface.
--   See LzmaDec_DecodeToDic description for information about STEPS and return results,
--   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
--   to work with CLzmaDec variables manually.
--
--finishMode:
--  It has meaning only if the decoding reaches output limit (*destLen).
--  LZMA_FINISH_ANY - Decode just destLen bytes.
--  LZMA_FINISH_END - Stream must be finished after (*destLen).
--*/
--
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
--    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
- /* ---------- One Call Interface ---------- */
- 
- /* LzmaDecode
---- a/include/linux/lzma/LzmaEnc.h
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
- } CLzmaEncProps;
- 
- void LzmaEncProps_Init(CLzmaEncProps *p);
--void LzmaEncProps_Normalize(CLzmaEncProps *p);
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
--
- 
- /* ---------- CLzmaEncHandle Interface ---------- */
- 
-@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
- void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
--SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-     int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
- 
--/* ---------- One Call Interface ---------- */
--
--/* LzmaEncode
--Return code:
--  SZ_OK               - OK
--  SZ_ERROR_MEM        - Memory allocation error
--  SZ_ERROR_PARAM      - Incorrect paramater
--  SZ_ERROR_OUTPUT_EOF - output buffer overflow
--  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
--*/
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
--    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
--
- #ifdef __cplusplus
- }
- #endif
---- a/lib/lzma/LzFind.c
-+++ b/lib/lzma/LzFind.c
-@@ -14,9 +14,15 @@
- 
- #define kStartMaxLen 3
- 
-+#if 0
-+#define DIRECT_INPUT	p->directInput
-+#else
-+#define DIRECT_INPUT	1
-+#endif
-+
- static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
- {
--  if (!p->directInput)
-+  if (!DIRECT_INPUT)
-   {
-     alloc->Free(alloc, p->bufferBase);
-     p->bufferBase = 0;
-@@ -28,7 +34,7 @@ static void LzInWindow_Free(CMatchFinder
- static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
- {
-   UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-   {
-     p->blockSize = blockSize;
-     return 1;
-@@ -42,12 +48,12 @@ static int LzInWindow_Create(CMatchFinde
-   return (p->bufferBase != 0);
- }
- 
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
--Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
- 
--UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
- 
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
- {
-   p->posLimit -= subValue;
-   p->pos -= subValue;
-@@ -58,7 +64,7 @@ static void MatchFinder_ReadBlock(CMatch
- {
-   if (p->streamEndWasReached || p->result != SZ_OK)
-     return;
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-   {
-     UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-     if (curSize > p->directInputRem)
-@@ -89,7 +95,7 @@ static void MatchFinder_ReadBlock(CMatch
-   }
- }
- 
--void MatchFinder_MoveBlock(CMatchFinder *p)
-+static void MatchFinder_MoveBlock(CMatchFinder *p)
- {
-   memmove(p->bufferBase,
-     p->buffer - p->keepSizeBefore,
-@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder
-   p->buffer = p->bufferBase + p->keepSizeBefore;
- }
- 
--int MatchFinder_NeedMove(CMatchFinder *p)
-+static int MatchFinder_NeedMove(CMatchFinder *p)
- {
--  if (p->directInput)
-+  if (DIRECT_INPUT)
-     return 0;
-   /* if (p->streamEndWasReached) return 0; */
-   return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
- }
- 
--void MatchFinder_ReadIfRequired(CMatchFinder *p)
--{
--  if (p->streamEndWasReached)
--    return;
--  if (p->keepSizeAfter >= p->streamPos - p->pos)
--    MatchFinder_ReadBlock(p);
--}
--
- static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
- {
-   if (MatchFinder_NeedMove(p))
-@@ -268,7 +266,7 @@ static void MatchFinder_SetLimits(CMatch
-   p->posLimit = p->pos + limit;
- }
- 
--void MatchFinder_Init(CMatchFinder *p)
-+static void MatchFinder_Init(CMatchFinder *p)
- {
-   UInt32 i;
-   for (i = 0; i < p->hashSizeSum; i++)
-@@ -287,7 +285,7 @@ static UInt32 MatchFinder_GetSubValue(CM
-   return (p->pos - p->historySize - 1) & kNormalizeMask;
- }
- 
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
- {
-   UInt32 i;
-   for (i = 0; i < numItems; i++)
-@@ -319,38 +317,7 @@ static void MatchFinder_CheckLimits(CMat
-   MatchFinder_SetLimits(p);
- }
- 
--static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
--    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
--    UInt32 *distances, UInt32 maxLen)
--{
--  son[_cyclicBufferPos] = curMatch;
--  for (;;)
--  {
--    UInt32 delta = pos - curMatch;
--    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
--      return distances;
--    {
--      const Byte *pb = cur - delta;
--      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
--      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
--      {
--        UInt32 len = 0;
--        while (++len != lenLimit)
--          if (pb[len] != cur[len])
--            break;
--        if (maxLen < len)
--        {
--          *distances++ = maxLen = len;
--          *distances++ = delta - 1;
--          if (len == lenLimit)
--            return distances;
--        }
--      }
--    }
--  }
--}
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-     UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-     UInt32 *distances, UInt32 maxLen)
- {
-@@ -460,10 +427,10 @@ static void SkipMatchesSpec(UInt32 lenLi
-   p->buffer++; \
-   if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
- 
--#define MOVE_POS_RET MOVE_POS return offset;
--
- static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
- 
-+#define MOVE_POS_RET MatchFinder_MovePos(p); return offset;
-+
- #define GET_MATCHES_HEADER2(minLen, ret_op) \
-   UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-   lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-@@ -479,62 +446,7 @@ static void MatchFinder_MovePos(CMatchFi
-   distances + offset, maxLen) - distances); MOVE_POS_RET;
- 
- #define SKIP_FOOTER \
--  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
--
--static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(2)
--  HASH2_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = 0;
--  GET_MATCHES_FOOTER(offset, 1)
--}
--
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(3)
--  HASH_ZIP_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = 0;
--  GET_MATCHES_FOOTER(offset, 2)
--}
--
--static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 hash2Value, delta2, maxLen, offset;
--  GET_MATCHES_HEADER(3)
--
--  HASH3_CALC;
--
--  delta2 = p->pos - p->hash[hash2Value];
--  curMatch = p->hash[kFix3HashSize + hashValue];
--  
--  p->hash[hash2Value] =
--  p->hash[kFix3HashSize + hashValue] = p->pos;
--
--
--  maxLen = 2;
--  offset = 0;
--  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
--  {
--    for (; maxLen != lenLimit; maxLen++)
--      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
--        break;
--    distances[0] = maxLen;
--    distances[1] = delta2 - 1;
--    offset = 2;
--    if (maxLen == lenLimit)
--    {
--      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
--      MOVE_POS_RET;
--    }
--  }
--  GET_MATCHES_FOOTER(offset, maxLen)
--}
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p);
- 
- static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
- {
-@@ -583,108 +495,6 @@ static UInt32 Bt4_MatchFinder_GetMatches
-   GET_MATCHES_FOOTER(offset, maxLen)
- }
- 
--static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
--  GET_MATCHES_HEADER(4)
--
--  HASH4_CALC;
--
--  delta2 = p->pos - p->hash[                hash2Value];
--  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
--  curMatch = p->hash[kFix4HashSize + hashValue];
--
--  p->hash[                hash2Value] =
--  p->hash[kFix3HashSize + hash3Value] =
--  p->hash[kFix4HashSize + hashValue] = p->pos;
--
--  maxLen = 1;
--  offset = 0;
--  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
--  {
--    distances[0] = maxLen = 2;
--    distances[1] = delta2 - 1;
--    offset = 2;
--  }
--  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
--  {
--    maxLen = 3;
--    distances[offset + 1] = delta3 - 1;
--    offset += 2;
--    delta2 = delta3;
--  }
--  if (offset != 0)
--  {
--    for (; maxLen != lenLimit; maxLen++)
--      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
--        break;
--    distances[offset - 2] = maxLen;
--    if (maxLen == lenLimit)
--    {
--      p->son[p->cyclicBufferPos] = curMatch;
--      MOVE_POS_RET;
--    }
--  }
--  if (maxLen < 3)
--    maxLen = 3;
--  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
--    distances + offset, maxLen) - (distances));
--  MOVE_POS_RET
--}
--
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
--  UInt32 offset;
--  GET_MATCHES_HEADER(3)
--  HASH_ZIP_CALC;
--  curMatch = p->hash[hashValue];
--  p->hash[hashValue] = p->pos;
--  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
--    distances, 2) - (distances));
--  MOVE_POS_RET
--}
--
--static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(2)
--    HASH2_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(3)
--    HASH_ZIP_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
--static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    UInt32 hash2Value;
--    SKIP_HEADER(3)
--    HASH3_CALC;
--    curMatch = p->hash[kFix3HashSize + hashValue];
--    p->hash[hash2Value] =
--    p->hash[kFix3HashSize + hashValue] = p->pos;
--    SKIP_FOOTER
--  }
--  while (--num != 0);
--}
--
- static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
- {
-   do
-@@ -701,61 +511,12 @@ static void Bt4_MatchFinder_Skip(CMatchF
-   while (--num != 0);
- }
- 
--static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    UInt32 hash2Value, hash3Value;
--    SKIP_HEADER(4)
--    HASH4_CALC;
--    curMatch = p->hash[kFix4HashSize + hashValue];
--    p->hash[                hash2Value] =
--    p->hash[kFix3HashSize + hash3Value] =
--    p->hash[kFix4HashSize + hashValue] = p->pos;
--    p->son[p->cyclicBufferPos] = curMatch;
--    MOVE_POS
--  }
--  while (--num != 0);
--}
--
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
--  do
--  {
--    SKIP_HEADER(3)
--    HASH_ZIP_CALC;
--    curMatch = p->hash[hashValue];
--    p->hash[hashValue] = p->pos;
--    p->son[p->cyclicBufferPos] = curMatch;
--    MOVE_POS
--  }
--  while (--num != 0);
--}
--
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
- {
-   vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-   vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-   vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-   vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
--  if (!p->btMode)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
--  }
--  else if (p->numHashBytes == 2)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
--  }
--  else if (p->numHashBytes == 3)
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
--  }
--  else
--  {
--    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
--    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
--  }
-+  vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+  vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
- }
---- a/lib/lzma/LzmaDec.c
-+++ b/lib/lzma/LzmaDec.c
-@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
-   p->needFlush = 0;
- }
- 
--void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
- {
-   p->needFlush = 1;
-   p->remainLen = 0;
-@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
-     p->needInitState = 1;
- }
- 
--void LzmaDec_Init(CLzmaDec *p)
-+static void LzmaDec_Init(CLzmaDec *p)
- {
-   p->dicPos = 0;
-   LzmaDec_InitDicAndState(p, True, True);
-@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
-   p->needInitState = 0;
- }
- 
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-     ELzmaFinishMode finishMode, ELzmaStatus *status)
- {
-   SizeT inSize = *srcLen;
-@@ -837,65 +837,13 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
-   return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
- }
- 
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
--{
--  SizeT outSize = *destLen;
--  SizeT inSize = *srcLen;
--  *srcLen = *destLen = 0;
--  for (;;)
--  {
--    SizeT inSizeCur = inSize, outSizeCur, dicPos;
--    ELzmaFinishMode curFinishMode;
--    SRes res;
--    if (p->dicPos == p->dicBufSize)
--      p->dicPos = 0;
--    dicPos = p->dicPos;
--    if (outSize > p->dicBufSize - dicPos)
--    {
--      outSizeCur = p->dicBufSize;
--      curFinishMode = LZMA_FINISH_ANY;
--    }
--    else
--    {
--      outSizeCur = dicPos + outSize;
--      curFinishMode = finishMode;
--    }
--
--    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
--    src += inSizeCur;
--    inSize -= inSizeCur;
--    *srcLen += inSizeCur;
--    outSizeCur = p->dicPos - dicPos;
--    memcpy(dest, p->dic + dicPos, outSizeCur);
--    dest += outSizeCur;
--    outSize -= outSizeCur;
--    *destLen += outSizeCur;
--    if (res != 0)
--      return res;
--    if (outSizeCur == 0 || outSize == 0)
--      return SZ_OK;
--  }
--}
--
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
- {
-   alloc->Free(alloc, p->probs);
-   p->probs = 0;
- }
- 
--static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
--{
--  alloc->Free(alloc, p->dic);
--  p->dic = 0;
--}
--
--void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
--{
--  LzmaDec_FreeProbs(p, alloc);
--  LzmaDec_FreeDict(p, alloc);
--}
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
- {
-   UInt32 dicSize;
-   Byte d;
-@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
-   return SZ_OK;
- }
- 
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
- {
-   CLzmaProps propNew;
-   RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
-   p->prop = propNew;
-   return SZ_OK;
- }
--
--SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
--{
--  CLzmaProps propNew;
--  SizeT dicBufSize;
--  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
--  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
--  dicBufSize = propNew.dicSize;
--  if (p->dic == 0 || dicBufSize != p->dicBufSize)
--  {
--    LzmaDec_FreeDict(p, alloc);
--    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
--    if (p->dic == 0)
--    {
--      LzmaDec_FreeProbs(p, alloc);
--      return SZ_ERROR_MEM;
--    }
--  }
--  p->dicBufSize = dicBufSize;
--  p->prop = propNew;
--  return SZ_OK;
--}
- 
- SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-     const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
---- a/lib/lzma/LzmaEnc.c
-+++ b/lib/lzma/LzmaEnc.c
-@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
-   p->writeEndMark = 0;
- }
- 
--void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+static void LzmaEncProps_Normalize(CLzmaEncProps *p)
- {
-   int level = p->level;
-   if (level < 0) level = 5;
-@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
-       #endif
- }
- 
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
- {
-   CLzmaEncProps props = *props2;
-   LzmaEncProps_Normalize(&props);
-@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
- 
- #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
- 
--UInt32 GetPosSlot1(UInt32 pos)
-+static UInt32 GetPosSlot1(UInt32 pos)
- {
-   UInt32 res;
-   BSR2_RET(pos, res);
-@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
- #define kNumLogBits (9 + (int)sizeof(size_t) / 2)
- #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
- 
--void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+static void LzmaEnc_FastPosInit(Byte *g_FastPos)
- {
-   int c = 2, slotFast;
-   g_FastPos[0] = 0;
-@@ -339,58 +339,6 @@ typedef struct
-   CSaveState saveState;
- } CLzmaEnc;
- 
--void LzmaEnc_SaveState(CLzmaEncHandle pp)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  CSaveState *dest = &p->saveState;
--  int i;
--  dest->lenEnc = p->lenEnc;
--  dest->repLenEnc = p->repLenEnc;
--  dest->state = p->state;
--
--  for (i = 0; i < kNumStates; i++)
--  {
--    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
--    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
--  }
--  for (i = 0; i < kNumLenToPosStates; i++)
--    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
--  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
--  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
--  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
--  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
--  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
--  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
--  memcpy(dest->reps, p->reps, sizeof(p->reps));
--  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
--}
--
--void LzmaEnc_RestoreState(CLzmaEncHandle pp)
--{
--  CLzmaEnc *dest = (CLzmaEnc *)pp;
--  const CSaveState *p = &dest->saveState;
--  int i;
--  dest->lenEnc = p->lenEnc;
--  dest->repLenEnc = p->repLenEnc;
--  dest->state = p->state;
--
--  for (i = 0; i < kNumStates; i++)
--  {
--    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
--    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
--  }
--  for (i = 0; i < kNumLenToPosStates; i++)
--    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
--  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
--  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
--  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
--  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
--  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
--  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
--  memcpy(dest->reps, p->reps, sizeof(p->reps));
--  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
--}
--
- SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -600,7 +548,7 @@ static void LitEnc_EncodeMatched(CRangeE
-   while (symbol < 0x10000);
- }
- 
--void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
- {
-   UInt32 i;
-   for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-@@ -1676,7 +1624,7 @@ static void FillDistancesPrices(CLzmaEnc
-   p->matchPriceCount = 0;
- }
- 
--void LzmaEnc_Construct(CLzmaEnc *p)
-+static void LzmaEnc_Construct(CLzmaEnc *p)
- {
-   RangeEnc_Construct(&p->rc);
-   MatchFinder_Construct(&p->matchFinderBase);
-@@ -1709,7 +1657,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
-   return p;
- }
- 
--void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
- {
-   alloc->Free(alloc, p->litProbs);
-   alloc->Free(alloc, p->saveState.litProbs);
-@@ -1717,7 +1665,7 @@ void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAl
-   p->saveState.litProbs = 0;
- }
- 
--void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
-   #ifndef _7ZIP_ST
-   MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-@@ -1947,7 +1895,7 @@ static SRes LzmaEnc_Alloc(CLzmaEnc *p, U
-   return SZ_OK;
- }
- 
--void LzmaEnc_Init(CLzmaEnc *p)
-+static void LzmaEnc_Init(CLzmaEnc *p)
- {
-   UInt32 i;
-   p->state = 0;
-@@ -2005,7 +1953,7 @@ void LzmaEnc_Init(CLzmaEnc *p)
-   p->lpMask = (1 << p->lp) - 1;
- }
- 
--void LzmaEnc_InitPrices(CLzmaEnc *p)
-+static void LzmaEnc_InitPrices(CLzmaEnc *p)
- {
-   if (!p->fastMode)
-   {
-@@ -2037,26 +1985,6 @@ static SRes LzmaEnc_AllocAndInit(CLzmaEn
-   return SZ_OK;
- }
- 
--static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  p->matchFinderBase.stream = inStream;
--  p->needInit = 1;
--  p->rc.outStream = outStream;
--  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
--}
--
--SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
--    ISeqInStream *inStream, UInt32 keepWindowSize,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  p->matchFinderBase.stream = inStream;
--  p->needInit = 1;
--  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
--}
--
- static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
- {
-   p->matchFinderBase.directInput = 1;
-@@ -2064,7 +1992,7 @@ static void LzmaEnc_SetInputBuf(CLzmaEnc
-   p->matchFinderBase.directInputRem = srcLen;
- }
- 
--SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-     UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2074,7 +2002,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
-   return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
- }
- 
--void LzmaEnc_Finish(CLzmaEncHandle pp)
-+static void LzmaEnc_Finish(CLzmaEncHandle pp)
- {
-   #ifndef _7ZIP_ST
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2107,53 +2035,6 @@ static size_t MyWrite(void *pp, const vo
-   return size;
- }
- 
--
--UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
--{
--  const CLzmaEnc *p = (CLzmaEnc *)pp;
--  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
--}
--
--const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
--{
--  const CLzmaEnc *p = (CLzmaEnc *)pp;
--  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
--}
--
--SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
--    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
--{
--  CLzmaEnc *p = (CLzmaEnc *)pp;
--  UInt64 nowPos64;
--  SRes res;
--  CSeqOutStreamBuf outStream;
--
--  outStream.funcTable.Write = MyWrite;
--  outStream.data = dest;
--  outStream.rem = *destLen;
--  outStream.overflow = False;
--
--  p->writeEndMark = False;
--  p->finished = False;
--  p->result = SZ_OK;
--
--  if (reInit)
--    LzmaEnc_Init(p);
--  LzmaEnc_InitPrices(p);
--  nowPos64 = p->nowPos64;
--  RangeEnc_Init(&p->rc);
--  p->rc.outStream = &outStream.funcTable;
--
--  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
--  
--  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
--  *destLen -= outStream.rem;
--  if (outStream.overflow)
--    return SZ_ERROR_OUTPUT_EOF;
--
--  return res;
--}
--
- static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
- {
-   SRes res = SZ_OK;
-@@ -2184,13 +2065,6 @@ static SRes LzmaEnc_Encode2(CLzmaEnc *p,
-   return res;
- }
- 
--SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
--    ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
--  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
--}
--
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
- {
-   CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2247,25 +2121,3 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
-     return SZ_ERROR_OUTPUT_EOF;
-   return res;
- }
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
--    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
--    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
--{
--  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
--  SRes res;
--  if (p == 0)
--    return SZ_ERROR_MEM;
--
--  res = LzmaEnc_SetProps(p, props);
--  if (res == SZ_OK)
--  {
--    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
--    if (res == SZ_OK)
--      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
--          writeEndMark, progress, alloc, allocBig);
--  }
--
--  LzmaEnc_Destroy(p, alloc, allocBig);
--  return res;
--}
diff --git a/target/linux/generic/hack-4.9/640-bridge-only-accept-EAP-locally.patch b/target/linux/generic/hack-4.9/640-bridge-only-accept-EAP-locally.patch
deleted file mode 100644
index ba87420b32..0000000000
--- a/target/linux/generic/hack-4.9/640-bridge-only-accept-EAP-locally.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From c6905cfdeb31a5c049db3da434b10fa0d3e83569 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:18:54 +0200
-Subject: bridge: only accept EAP locally
-
-When bridging, do not forward EAP frames to other ports, only deliver
-them locally, regardless of the state.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/bridge/br_input.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -164,11 +164,14 @@ int br_handle_frame_finish(struct net *n
- 		}
- 	}
- 
-+	BR_INPUT_SKB_CB(skb)->brdev = br->dev;
-+
-+	if (skb->protocol == htons(ETH_P_PAE))
-+		return br_pass_frame_up(skb);
-+
- 	if (p->state == BR_STATE_LEARNING)
- 		goto drop;
- 
--	BR_INPUT_SKB_CB(skb)->brdev = br->dev;
--
- 	if (IS_ENABLED(CONFIG_INET) && skb->protocol == htons(ETH_P_ARP))
- 		br_do_proxy_arp(skb, br, vid, p);
- 
diff --git a/target/linux/generic/hack-4.9/641-bridge_port_isolate.patch b/target/linux/generic/hack-4.9/641-bridge_port_isolate.patch
deleted file mode 100644
index a436dd2b1e..0000000000
--- a/target/linux/generic/hack-4.9/641-bridge_port_isolate.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From e988390850731aa1697ed09d47b0932fac1af175 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:20:03 +0200
-Subject: bridge: port isolate
-
-Isolating individual bridge ports
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/if_bridge.h | 1 +
- net/bridge/br_forward.c   | 5 +++++
- net/bridge/br_input.c     | 3 +++
- net/bridge/br_sysfs_if.c  | 2 ++
- 4 files changed, 11 insertions(+)
-
---- a/include/linux/if_bridge.h
-+++ b/include/linux/if_bridge.h
-@@ -47,6 +47,7 @@ struct br_ip_list {
- #define BR_PROXYARP_WIFI	BIT(10)
- #define BR_MCAST_FLOOD		BIT(11)
- #define BR_MULTICAST_TO_UNICAST	BIT(12)
-+#define BR_ISOLATE_MODE		BIT(13)
- 
- #define BR_DEFAULT_AGEING_TIME	(300 * HZ)
- 
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -140,6 +140,9 @@ static int deliver_clone(const struct ne
- void br_forward(const struct net_bridge_port *to,
- 		struct sk_buff *skb, bool local_rcv, bool local_orig)
- {
-+	if (to->flags & BR_ISOLATE_MODE && !local_orig)
-+		to = NULL;
-+
- 	if (to && should_deliver(to, skb)) {
- 		if (local_rcv)
- 			deliver_clone(to, skb, local_orig);
-@@ -205,6 +208,8 @@ void br_flood(struct net_bridge *br, str
- 	struct net_bridge_port *p;
- 
- 	list_for_each_entry_rcu(p, &br->port_list, list) {
-+		if (!local_orig && (p->flags & BR_ISOLATE_MODE))
-+			continue;
- 		/* Do not flood unicast traffic to ports that turn it off */
- 		if (pkt_type == BR_PKT_UNICAST && !(p->flags & BR_FLOOD))
- 			continue;
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -175,6 +175,9 @@ int br_handle_frame_finish(struct net *n
- 	if (IS_ENABLED(CONFIG_INET) && skb->protocol == htons(ETH_P_ARP))
- 		br_do_proxy_arp(skb, br, vid, p);
- 
-+	if (p->flags & BR_ISOLATE_MODE)
-+		return br_pass_frame_up(skb);
-+
- 	switch (pkt_type) {
- 	case BR_PKT_MULTICAST:
- 		mdst = br_mdb_get(br, skb, vid);
---- a/net/bridge/br_sysfs_if.c
-+++ b/net/bridge/br_sysfs_if.c
-@@ -172,6 +172,7 @@ BRPORT_ATTR_FLAG(unicast_flood, BR_FLOOD
- BRPORT_ATTR_FLAG(proxyarp, BR_PROXYARP);
- BRPORT_ATTR_FLAG(proxyarp_wifi, BR_PROXYARP_WIFI);
- BRPORT_ATTR_FLAG(multicast_flood, BR_MCAST_FLOOD);
-+BRPORT_ATTR_FLAG(isolated, BR_ISOLATE_MODE);
- 
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
-@@ -220,6 +221,7 @@ static const struct brport_attribute *br
- 	&brport_attr_proxyarp,
- 	&brport_attr_proxyarp_wifi,
- 	&brport_attr_multicast_flood,
-+	&brport_attr_isolated,
- 	NULL
- };
- 
diff --git a/target/linux/generic/hack-4.9/651-wireless_mesh_header.patch b/target/linux/generic/hack-4.9/651-wireless_mesh_header.patch
deleted file mode 100644
index a4699ae8ed..0000000000
--- a/target/linux/generic/hack-4.9/651-wireless_mesh_header.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 6d3bc769657b0ee7c7506dad9911111c4226a7ea Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:21:05 +0200
-Subject: mac80211: increase wireless mesh header size
-
-lede-commit 3d4466cfd8f75f717efdb1f96fdde3c70d865fc1
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- include/linux/netdevice.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -137,8 +137,8 @@ static inline bool dev_xmit_complete(int
- 
- #if defined(CONFIG_HYPERV_NET)
- # define LL_MAX_HEADER 128
--#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
--# if defined(CONFIG_MAC80211_MESH)
-+#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) || 1
-+# if defined(CONFIG_MAC80211_MESH) || 1
- #  define LL_MAX_HEADER 128
- # else
- #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/hack-4.9/660-fq_codel_defaults.patch b/target/linux/generic/hack-4.9/660-fq_codel_defaults.patch
deleted file mode 100644
index ea461e189d..0000000000
--- a/target/linux/generic/hack-4.9/660-fq_codel_defaults.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a6ccb238939b25851474a279b20367fd24a0e816 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:21:53 +0200
-Subject:  hack: net: fq_codel: tune defaults for small devices
-
-Assume that x86_64 devices always have a big memory and do not need this 
-optimization compared to devices with only 32 MB or 64 MB RAM.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_fq_codel.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -485,7 +485,11 @@ static int fq_codel_init(struct Qdisc *s
- 
- 	sch->limit = 10*1024;
- 	q->flows_cnt = 1024;
-+#ifdef CONFIG_X86_64
- 	q->memory_limit = 32 << 20; /* 32 MBytes */
-+#else
-+	q->memory_limit = 4 << 20; /* 4 MBytes */
-+#endif
- 	q->drop_batch_size = 64;
- 	q->quantum = psched_mtu(qdisc_dev(sch));
- 	q->perturbation = prandom_u32();
diff --git a/target/linux/generic/hack-4.9/661-use_fq_codel_by_default.patch b/target/linux/generic/hack-4.9/661-use_fq_codel_by_default.patch
deleted file mode 100644
index 34fc2a37c3..0000000000
--- a/target/linux/generic/hack-4.9/661-use_fq_codel_by_default.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 1d418f7e88035ed7a94073f6354246c66e9193e9 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:22:58 +0200
-Subject: fq_codel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/net/sch_generic.h | 3 ++-
- net/sched/Kconfig         | 3 ++-
- net/sched/sch_api.c       | 2 +-
- net/sched/sch_fq_codel.c  | 3 ++-
- net/sched/sch_generic.c   | 4 ++--
- 5 files changed, 9 insertions(+), 6 deletions(-)
-
---- a/include/net/sch_generic.h
-+++ b/include/net/sch_generic.h
-@@ -339,12 +339,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
- extern struct Qdisc_ops pfifo_fast_ops;
- extern struct Qdisc_ops mq_qdisc_ops;
- extern struct Qdisc_ops noqueue_qdisc_ops;
-+extern struct Qdisc_ops fq_codel_qdisc_ops;
- extern const struct Qdisc_ops *default_qdisc_ops;
- static inline const struct Qdisc_ops *
- get_default_qdisc_ops(const struct net_device *dev, int ntx)
- {
- 	return ntx < dev->real_num_tx_queues ?
--			default_qdisc_ops : &pfifo_fast_ops;
-+			default_qdisc_ops : &fq_codel_qdisc_ops;
- }
- 
- struct Qdisc_class_common {
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -3,8 +3,9 @@
- # 
- 
- menuconfig NET_SCHED
--	bool "QoS and/or fair queueing"
-+	def_bool y
- 	select NET_SCH_FIFO
-+	select NET_SCH_FQ_CODEL
- 	---help---
- 	  When the kernel has several packets to send out over a network
- 	  device, it has to decide which ones to send first, which ones to
---- a/net/sched/sch_api.c
-+++ b/net/sched/sch_api.c
-@@ -1977,7 +1977,7 @@ static int __init pktsched_init(void)
- 		return err;
- 	}
- 
--	register_qdisc(&pfifo_fast_ops);
-+	register_qdisc(&fq_codel_qdisc_ops);
- 	register_qdisc(&pfifo_qdisc_ops);
- 	register_qdisc(&bfifo_qdisc_ops);
- 	register_qdisc(&pfifo_head_drop_qdisc_ops);
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -715,7 +715,7 @@ static const struct Qdisc_class_ops fq_c
- 	.walk		=	fq_codel_walk,
- };
- 
--static struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
-+struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
- 	.cl_ops		=	&fq_codel_class_ops,
- 	.id		=	"fq_codel",
- 	.priv_size	=	sizeof(struct fq_codel_sched_data),
-@@ -730,6 +730,7 @@ static struct Qdisc_ops fq_codel_qdisc_o
- 	.dump_stats =	fq_codel_dump_stats,
- 	.owner		=	THIS_MODULE,
- };
-+EXPORT_SYMBOL(fq_codel_qdisc_ops);
- 
- static int __init fq_codel_module_init(void)
- {
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -31,7 +31,7 @@
- #include <net/dst.h>
- 
- /* Qdisc to use by default */
--const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops;
-+const struct Qdisc_ops *default_qdisc_ops = &fq_codel_qdisc_ops;
- EXPORT_SYMBOL(default_qdisc_ops);
- 
- /* Main transmission queue. */
-@@ -760,7 +760,7 @@ static void attach_one_default_qdisc(str
- 				     void *_unused)
- {
- 	struct Qdisc *qdisc;
--	const struct Qdisc_ops *ops = default_qdisc_ops;
-+	const struct Qdisc_ops *ops = &fq_codel_qdisc_ops;
- 
- 	if (dev->priv_flags & IFF_NO_QUEUE)
- 		ops = &noqueue_qdisc_ops;
diff --git a/target/linux/generic/hack-4.9/662-remove_pfifo_fast.patch b/target/linux/generic/hack-4.9/662-remove_pfifo_fast.patch
deleted file mode 100644
index d9fba6288d..0000000000
--- a/target/linux/generic/hack-4.9/662-remove_pfifo_fast.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From b531d492d5ef1cf9dba0f4888eb5fd8624a6d762 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:23:42 +0200
-Subject: net: sched: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_generic.c | 140 ------------------------------------------------
- 1 file changed, 140 deletions(-)
-
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -449,146 +449,6 @@ struct Qdisc_ops noqueue_qdisc_ops __rea
- 	.owner		=	THIS_MODULE,
- };
- 
--static const u8 prio2band[TC_PRIO_MAX + 1] = {
--	1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1
--};
--
--/* 3-band FIFO queue: old style, but should be a bit faster than
--   generic prio+fifo combination.
-- */
--
--#define PFIFO_FAST_BANDS 3
--
--/*
-- * Private data for a pfifo_fast scheduler containing:
-- * 	- queues for the three band
-- * 	- bitmap indicating which of the bands contain skbs
-- */
--struct pfifo_fast_priv {
--	u32 bitmap;
--	struct qdisc_skb_head q[PFIFO_FAST_BANDS];
--};
--
--/*
-- * Convert a bitmap to the first band number where an skb is queued, where:
-- * 	bitmap=0 means there are no skbs on any band.
-- * 	bitmap=1 means there is an skb on band 0.
-- *	bitmap=7 means there are skbs on all 3 bands, etc.
-- */
--static const int bitmap2band[] = {-1, 0, 1, 0, 2, 0, 1, 0};
--
--static inline struct qdisc_skb_head *band2list(struct pfifo_fast_priv *priv,
--					     int band)
--{
--	return priv->q + band;
--}
--
--static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc *qdisc,
--			      struct sk_buff **to_free)
--{
--	if (qdisc->q.qlen < qdisc_dev(qdisc)->tx_queue_len) {
--		int band = prio2band[skb->priority & TC_PRIO_MAX];
--		struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--		struct qdisc_skb_head *list = band2list(priv, band);
--
--		priv->bitmap |= (1 << band);
--		qdisc->q.qlen++;
--		return __qdisc_enqueue_tail(skb, qdisc, list);
--	}
--
--	return qdisc_drop(skb, qdisc, to_free);
--}
--
--static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	int band = bitmap2band[priv->bitmap];
--
--	if (likely(band >= 0)) {
--		struct qdisc_skb_head *qh = band2list(priv, band);
--		struct sk_buff *skb = __qdisc_dequeue_head(qh);
--
--		if (likely(skb != NULL)) {
--			qdisc_qstats_backlog_dec(qdisc, skb);
--			qdisc_bstats_update(qdisc, skb);
--		}
--
--		qdisc->q.qlen--;
--		if (qh->qlen == 0)
--			priv->bitmap &= ~(1 << band);
--
--		return skb;
--	}
--
--	return NULL;
--}
--
--static struct sk_buff *pfifo_fast_peek(struct Qdisc *qdisc)
--{
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--	int band = bitmap2band[priv->bitmap];
--
--	if (band >= 0) {
--		struct qdisc_skb_head *qh = band2list(priv, band);
--
--		return qh->head;
--	}
--
--	return NULL;
--}
--
--static void pfifo_fast_reset(struct Qdisc *qdisc)
--{
--	int prio;
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--
--	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
--		__qdisc_reset_queue(band2list(priv, prio));
--
--	priv->bitmap = 0;
--	qdisc->qstats.backlog = 0;
--	qdisc->q.qlen = 0;
--}
--
--static int pfifo_fast_dump(struct Qdisc *qdisc, struct sk_buff *skb)
--{
--	struct tc_prio_qopt opt = { .bands = PFIFO_FAST_BANDS };
--
--	memcpy(&opt.priomap, prio2band, TC_PRIO_MAX + 1);
--	if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt))
--		goto nla_put_failure;
--	return skb->len;
--
--nla_put_failure:
--	return -1;
--}
--
--static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt)
--{
--	int prio;
--	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--
--	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
--		qdisc_skb_head_init(band2list(priv, prio));
--
--	/* Can by-pass the queue discipline */
--	qdisc->flags |= TCQ_F_CAN_BYPASS;
--	return 0;
--}
--
--struct Qdisc_ops pfifo_fast_ops __read_mostly = {
--	.id		=	"pfifo_fast",
--	.priv_size	=	sizeof(struct pfifo_fast_priv),
--	.enqueue	=	pfifo_fast_enqueue,
--	.dequeue	=	pfifo_fast_dequeue,
--	.peek		=	pfifo_fast_peek,
--	.init		=	pfifo_fast_init,
--	.reset		=	pfifo_fast_reset,
--	.dump		=	pfifo_fast_dump,
--	.owner		=	THIS_MODULE,
--};
--EXPORT_SYMBOL(pfifo_fast_ops);
--
- static struct lock_class_key qdisc_tx_busylock;
- static struct lock_class_key qdisc_running_key;
- 
diff --git a/target/linux/generic/hack-4.9/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-4.9/700-swconfig_switch_drivers.patch
deleted file mode 100644
index af8840fde2..0000000000
--- a/target/linux/generic/hack-4.9/700-swconfig_switch_drivers.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:24:23 +0200
-Subject: net: swconfig: adds openwrt switch layer
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/net/phy/Kconfig   | 83 +++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/phy/Makefile  | 15 +++++++++
- include/uapi/linux/Kbuild |  1 +
- 3 files changed, 99 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -147,6 +147,89 @@ config MDIO_XGENE
- 	  This module provides a driver for the MDIO busses found in the
- 	  APM X-Gene SoC's.
- 
-+comment "Switch configuration API + drivers"
-+
-+config SWCONFIG
-+	tristate "Switch configuration API"
-+	---help---
-+	  Switch configuration API using netlink. This allows
-+	  you to configure the VLAN features of certain switches.
-+
-+config SWCONFIG_LEDS
-+	bool "Switch LED trigger support"
-+	depends on (SWCONFIG && LEDS_TRIGGERS)
-+
-+config ADM6996_PHY
-+	tristate "Driver for ADM6996 switches"
-+	select SWCONFIG
-+	---help---
-+	  Currently supports the ADM6996FC and ADM6996M switches.
-+	  Support for FC is very limited.
-+
-+config AR8216_PHY
-+	tristate "Driver for Atheros AR8216 switches"
-+	select ETHERNET_PACKET_MANGLE
-+	select SWCONFIG
-+
-+config AR8216_PHY_LEDS
-+	bool "Atheros AR8216 switch LED support"
-+	depends on (AR8216_PHY && LEDS_CLASS)
-+
-+source "drivers/net/phy/b53/Kconfig"
-+
-+config IP17XX_PHY
-+	tristate "Driver for IC+ IP17xx switches"
-+	select SWCONFIG
-+
-+config MVSWITCH_PHY
-+	tristate "Driver for Marvell 88E6060 switches"
-+	select ETHERNET_PACKET_MANGLE
-+
-+config MVSW61XX_PHY
-+	tristate "Driver for Marvell 88E6171/6172 switches"
-+	select SWCONFIG
-+
-+config PSB6970_PHY
-+	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
-+	select SWCONFIG
-+	select ETHERNET_PACKET_MANGLE
-+
-+config RTL8306_PHY
-+	tristate "Driver for Realtek RTL8306S switches"
-+	select SWCONFIG
-+
-+config RTL8366_SMI
-+	tristate "Driver for the RTL8366 SMI interface"
-+	depends on GPIOLIB
-+	---help---
-+	  This module implements the SMI interface protocol which is used
-+	  by some RTL8366 ethernet switch devices via the generic GPIO API.
-+
-+if RTL8366_SMI
-+
-+config RTL8366_SMI_DEBUG_FS
-+	bool "RTL8366 SMI interface debugfs support"
-+        depends on DEBUG_FS
-+        default n
-+
-+config RTL8366S_PHY
-+	tristate "Driver for the Realtek RTL8366S switch"
-+	select SWCONFIG
-+
-+config RTL8366RB_PHY
-+	tristate "Driver for the Realtek RTL8366RB switch"
-+	select SWCONFIG
-+
-+config RTL8367_PHY
-+	tristate "Driver for the Realtek RTL8367R/M switches"
-+	select SWCONFIG
-+
-+config RTL8367B_PHY
-+	tristate "Driver fot the Realtek RTL8367R-VB switch"
-+	select SWCONFIG
-+
-+endif # RTL8366_SMI
-+
- comment "MII PHY device drivers"
- 
- config AMD_PHY
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -5,6 +5,21 @@ libphy-$(CONFIG_SWPHY)		+= swphy.o
- 
- obj-$(CONFIG_PHYLIB)		+= libphy.o
- 
-+obj-$(CONFIG_SWCONFIG)		+= swconfig.o
-+obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
-+obj-$(CONFIG_AR8216_PHY)	+= ar8216.o ar8327.o
-+obj-$(CONFIG_SWCONFIG_B53)	+= b53/
-+obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
-+obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
-+obj-$(CONFIG_MVSW61XX_PHY)	+= mvsw61xx.o
-+obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
-+obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
-+obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
-+obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
-+obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
-+obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
-+obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
-+
- obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
- obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
---- a/include/uapi/linux/Kbuild
-+++ b/include/uapi/linux/Kbuild
-@@ -399,6 +399,7 @@ header-y += stddef.h
- header-y += string.h
- header-y += suspend_ioctls.h
- header-y += swab.h
-+header-y += switch.h
- header-y += synclink.h
- header-y += sync_file.h
- header-y += sysctl.h
---- a/include/linux/platform_data/b53.h
-+++ b/include/linux/platform_data/b53.h
-@@ -25,6 +25,9 @@ struct b53_platform_data {
- 	u32 chip_id;
- 	u16 enabled_ports;
- 
-+	/* allow to specify an ethX alias */
-+	const char *alias;
-+
- 	/* only used by MMAP'd driver */
- 	unsigned big_endian:1;
- 	void __iomem *regs;
diff --git a/target/linux/generic/hack-4.9/702-phy_add_aneg_done_function.patch b/target/linux/generic/hack-4.9/702-phy_add_aneg_done_function.patch
deleted file mode 100644
index 1862375be2..0000000000
--- a/target/linux/generic/hack-4.9/702-phy_add_aneg_done_function.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -495,6 +495,12 @@ struct phy_driver {
- 	/* Determines the negotiated speed and duplex */
- 	int (*read_status)(struct phy_device *phydev);
- 
-+	/* 
-+	 * Update the value in phydev->link to reflect the 
-+	 * current link value
-+	 */
-+	int (*update_link)(struct phy_device *phydev);
-+
- 	/* Clears any pending interrupts */
- 	int (*ack_interrupt)(struct phy_device *phydev);
- 
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1309,6 +1309,9 @@ int genphy_update_link(struct phy_device
- {
- 	int status;
- 
-+	if (phydev->drv && phydev->drv->update_link)
-+		return phydev->drv->update_link(phydev);
-+
- 	/* Do a fake read */
- 	status = phy_read(phydev, MII_BMSR);
- 	if (status < 0)
diff --git a/target/linux/generic/hack-4.9/710-phy-add-mdio_register_board_info.patch b/target/linux/generic/hack-4.9/710-phy-add-mdio_register_board_info.patch
deleted file mode 100644
index 844f747859..0000000000
--- a/target/linux/generic/hack-4.9/710-phy-add-mdio_register_board_info.patch
+++ /dev/null
@@ -1,197 +0,0 @@
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -80,6 +80,8 @@ bool mdiobus_is_registered_device(struct
- }
- EXPORT_SYMBOL(mdiobus_is_registered_device);
- 
-+#include "mdio-boardinfo.h"
-+
- /**
-  * mdiobus_alloc_size - allocate a mii_bus structure
-  * @size: extra amount of memory to allocate for private storage.
-@@ -400,6 +402,17 @@ void mdiobus_free(struct mii_bus *bus)
- }
- EXPORT_SYMBOL(mdiobus_free);
- 
-+static void mdiobus_setup_phydev_from_boardinfo(struct mii_bus *bus,
-+						struct phy_device *phydev,
-+						struct mdio_board_info *bi)
-+{
-+	if (strcmp(bus->id, bi->bus_id) ||
-+	    bi->phy_addr != phydev->mdio.addr)
-+	    return;
-+
-+	phydev->mdio.dev.platform_data = (void *) bi->platform_data;
-+}
-+
- /**
-  * mdiobus_scan - scan a bus for MDIO devices.
-  * @bus: mii_bus to scan
-@@ -415,6 +428,7 @@ EXPORT_SYMBOL(mdiobus_free);
- struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
- {
- 	struct phy_device *phydev;
-+	struct mdio_board_entry *be;
- 	int err;
- 
- 	phydev = get_phy_device(bus, addr, false);
-@@ -427,6 +441,12 @@ struct phy_device *mdiobus_scan(struct m
- 	 */
- 	of_mdiobus_link_mdiodev(bus, &phydev->mdio);
- 
-+	mutex_lock(&__mdio_board_lock);
-+	list_for_each_entry(be, &__mdio_board_list, list)
-+		mdiobus_setup_phydev_from_boardinfo(bus, phydev,
-+						    &be->board_info);
-+	mutex_unlock(&__mdio_board_lock);
-+
- 	err = phy_device_register(phydev);
- 	if (err) {
- 		phy_device_free(phydev);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -870,6 +870,23 @@ void mdio_bus_exit(void);
- 
- extern struct bus_type mdio_bus_type;
- 
-+struct mdio_board_info {
-+	const char	*bus_id;
-+	int		phy_addr;
-+
-+	const void	*platform_data;
-+};
-+
-+#ifdef CONFIG_MDIO_BOARDINFO
-+int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n);
-+#else
-+static inline int
-+mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n)
-+{
-+	return 0;
-+}
-+#endif
-+
- /**
-  * module_phy_driver() - Helper macro for registering PHY drivers
-  * @__phy_drivers: array of PHY drivers to register
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -149,6 +149,10 @@ config MDIO_XGENE
- 
- comment "Switch configuration API + drivers"
- 
-+config MDIO_BOARDINFO
-+	bool
-+	default y
-+
- config SWCONFIG
- 	tristate "Switch configuration API"
- 	---help---
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -3,6 +3,8 @@
- libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o
- libphy-$(CONFIG_SWPHY)		+= swphy.o
- 
-+obj-$(CONFIG_MDIO_BOARDINFO)	+= mdio-boardinfo.o
-+
- obj-$(CONFIG_PHYLIB)		+= libphy.o
- 
- obj-$(CONFIG_SWCONFIG)		+= swconfig.o
---- /dev/null
-+++ b/drivers/net/phy/mdio-boardinfo.c
-@@ -0,0 +1,58 @@
-+/*
-+ * mdio-boardinfo.c - collect pre-declarations of PHY devices
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/phy.h>
-+#include <linux/slab.h>
-+#include <linux/export.h>
-+#include <linux/mutex.h>
-+#include <linux/phy.h>
-+
-+#include "mdio-boardinfo.h"
-+
-+/*
-+ * These symbols are exported ONLY FOR the mdio_bus component.
-+ * No other users will be supported.
-+ */
-+
-+LIST_HEAD(__mdio_board_list);
-+EXPORT_SYMBOL_GPL(__mdio_board_list);
-+
-+DEFINE_MUTEX(__mdio_board_lock);
-+EXPORT_SYMBOL_GPL(__mdio_board_lock);
-+
-+/**
-+ * mdio_register_board_info - register PHY devices for a given board
-+ * @info: array of chip descriptors
-+ * @n: how many descriptors are provided
-+ * Context: can sleep
-+ *
-+ * The board info passed can safely be __initdata ... but be careful of
-+ * any embedded pointers (platform_data, etc), they're copied as-is.
-+ */
-+int __init
-+mdiobus_register_board_info(struct mdio_board_info const *info, unsigned n)
-+{
-+	struct mdio_board_entry *be;
-+	int i;
-+
-+	be = kzalloc(n * sizeof(*be), GFP_KERNEL);
-+	if (!be)
-+		return -ENOMEM;
-+
-+	for (i = 0; i < n; i++, be++, info++) {
-+		memcpy(&be->board_info, info, sizeof(*info));
-+		mutex_lock(&__mdio_board_lock);
-+		list_add_tail(&be->list, &__mdio_board_list);
-+		mutex_unlock(&__mdio_board_lock);
-+	}
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/net/phy/mdio-boardinfo.h
-@@ -0,0 +1,22 @@
-+/*
-+ * mdio-boardinfo.h - boardinfo interface internal to the mdio_bus component
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/mutex.h>
-+
-+struct mdio_board_entry {
-+	struct list_head	list;
-+	struct mdio_board_info	board_info;
-+};
-+
-+/* __mdio_board_lock protects __mdio_board_list
-+ * only mdio_bus components are allowed to use these symbols.
-+ */
-+extern struct mutex __mdio_board_lock;
-+extern struct list_head __mdio_board_list;
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -17,7 +17,7 @@ obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_MDIO) += mdio.o
- obj-$(CONFIG_NET) += Space.o loopback.o
- obj-$(CONFIG_NETCONSOLE) += netconsole.o
--obj-$(CONFIG_PHYLIB) += phy/
-+obj-y += phy/
- obj-$(CONFIG_RIONET) += rionet.o
- obj-$(CONFIG_NET_TEAM) += team/
- obj-$(CONFIG_TUN) += tun.o
diff --git a/target/linux/generic/hack-4.9/721-phy_packets.patch b/target/linux/generic/hack-4.9/721-phy_packets.patch
deleted file mode 100644
index d22c873032..0000000000
--- a/target/linux/generic/hack-4.9/721-phy_packets.patch
+++ /dev/null
@@ -1,176 +0,0 @@
-From ffe387740bbe88dd88bbe04d6375902708003d6e Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:25:00 +0200
-Subject: net: add packet mangeling patch
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h | 11 +++++++++++
- include/linux/skbuff.h    | 14 ++++----------
- net/Kconfig               |  6 ++++++
- net/core/dev.c            | 18 ++++++++++++++----
- net/core/skbuff.c         | 17 +++++++++++++++++
- net/ethernet/eth.c        |  6 ++++++
- 6 files changed, 58 insertions(+), 14 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1400,6 +1400,7 @@ enum netdev_priv_flags {
- 	IFF_PHONY_HEADROOM		= 1<<26,
- 	IFF_MACSEC			= 1<<27,
- 	IFF_L3MDEV_RX_HANDLER		= 1<<28,
-+	IFF_NO_IP_ALIGN			= 1<<29,
- };
- 
- #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
-@@ -1430,6 +1431,7 @@ enum netdev_priv_flags {
- #define IFF_RXFH_CONFIGURED		IFF_RXFH_CONFIGURED
- #define IFF_MACSEC			IFF_MACSEC
- #define IFF_L3MDEV_RX_HANDLER		IFF_L3MDEV_RX_HANDLER
-+#define IFF_NO_IP_ALIGN			IFF_NO_IP_ALIGN
- 
- /**
-  *	struct net_device - The DEVICE structure.
-@@ -1716,6 +1718,11 @@ struct net_device {
- 	const struct ndisc_ops *ndisc_ops;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
-+	struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
-+#endif
-+
- 	const struct header_ops *header_ops;
- 
- 	unsigned int		flags;
-@@ -1783,6 +1790,10 @@ struct net_device {
- 	struct mpls_dev __rcu	*mpls_ptr;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void			*phy_ptr; /* PHY device specific data */
-+#endif
-+
- /*
-  * Cache lines mostly used on receive path (including eth_type_trans())
-  */
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2339,6 +2339,10 @@ static inline int pskb_trim(struct sk_bu
- 	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
- }
- 
-+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp);
-+
-+
- /**
-  *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
-  *	@skb: buffer to alter
-@@ -2459,16 +2463,6 @@ static inline struct sk_buff *dev_alloc_
- }
- 
- 
--static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
--		unsigned int length, gfp_t gfp)
--{
--	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
--
--	if (NET_IP_ALIGN && skb)
--		skb_reserve(skb, NET_IP_ALIGN);
--	return skb;
--}
--
- static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
- 		unsigned int length)
- {
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -25,6 +25,12 @@ menuconfig NET
- 
- if NET
- 
-+config ETHERNET_PACKET_MANGLE
-+	bool
-+	help
-+	  This option can be selected by phy drivers that need to mangle
-+	  packets going in or out of an ethernet device.
-+
- config WANT_COMPAT_NETLINK_MESSAGES
- 	bool
- 	help
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -2972,10 +2972,20 @@ static int xmit_one(struct sk_buff *skb,
- 	if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
- 		dev_queue_xmit_nit(skb, dev);
- 
--	len = skb->len;
--	trace_net_dev_start_xmit(skb, dev);
--	rc = netdev_start_xmit(skb, dev, txq, more);
--	trace_net_dev_xmit(skb, rc, dev, len);
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (!dev->eth_mangle_tx ||
-+	    (skb = dev->eth_mangle_tx(dev, skb)) != NULL)
-+#else
-+	if (1)
-+#endif
-+	{
-+		len = skb->len;
-+		trace_net_dev_start_xmit(skb, dev);
-+		rc = netdev_start_xmit(skb, dev, txq, more);
-+		trace_net_dev_xmit(skb, rc, dev, len);
-+	} else {
-+		rc = NETDEV_TX_OK;
-+	}
- 
- 	return rc;
- }
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -64,6 +64,7 @@
- #include <linux/errqueue.h>
- #include <linux/prefetch.h>
- #include <linux/if_vlan.h>
-+#include <linux/if.h>
- 
- #include <net/protocol.h>
- #include <net/dst.h>
-@@ -533,6 +534,22 @@ skb_fail:
- }
- EXPORT_SYMBOL(__napi_alloc_skb);
- 
-+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp)
-+{
-+	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
-+		return skb;
-+#endif
-+
-+	if (NET_IP_ALIGN && skb)
-+		skb_reserve(skb, NET_IP_ALIGN);
-+	return skb;
-+}
-+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
-+
- void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
- 		     int size, unsigned int truesize)
- {
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -171,6 +171,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- 	const struct ethhdr *eth;
- 
- 	skb->dev = dev;
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev->eth_mangle_rx)
-+		dev->eth_mangle_rx(dev, skb);
-+#endif
-+
- 	skb_reset_mac_header(skb);
- 
- 	eth = (struct ethhdr *)skb->data;
diff --git a/target/linux/generic/hack-4.9/773-bgmac-add-srab-switch.patch b/target/linux/generic/hack-4.9/773-bgmac-add-srab-switch.patch
deleted file mode 100644
index 55ebae7143..0000000000
--- a/target/linux/generic/hack-4.9/773-bgmac-add-srab-switch.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 7 Jul 2017 17:26:01 +0200
-Subject: bcm53xx: bgmac: use srab switch driver
-
-use the srab switch driver on these SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c |  1 +
- drivers/net/ethernet/broadcom/bgmac.c      | 24 ++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/bgmac.h      |  4 ++++
- 3 files changed, 29 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -243,6 +243,7 @@ static int bgmac_probe(struct bcma_devic
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- 		bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
- 		bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
-+		bgmac->feature_flags |= BGMAC_FEAT_SRAB;
- 		break;
- 	case BCMA_CHIP_ID_BCM53573:
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -11,6 +11,7 @@
- 
- #include <linux/bcma/bcma.h>
- #include <linux/etherdevice.h>
-+#include <linux/platform_data/b53.h>
- #include <linux/bcm47xx_nvram.h>
- #include "bgmac.h"
- 
-@@ -1388,6 +1389,17 @@ static const struct ethtool_ops bgmac_et
- 	.set_link_ksettings     = phy_ethtool_set_link_ksettings,
- };
- 
-+static struct b53_platform_data bgmac_b53_pdata = {
-+};
-+
-+static struct platform_device bgmac_b53_dev = {
-+	.name		= "b53-srab-switch",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &bgmac_b53_pdata,
-+	},
-+};
-+
- /**************************************************
-  * MII
-  **************************************************/
-@@ -1534,6 +1546,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
- 	net_dev->hw_features = net_dev->features;
- 	net_dev->vlan_features = net_dev->features;
- 
-+	if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) {
-+		bgmac_b53_pdata.regs = ioremap_nocache(0x18007000, 0x1000);
-+
-+		err = platform_device_register(&bgmac_b53_dev);
-+		if (!err)
-+			bgmac->b53_device = &bgmac_b53_dev;
-+	}
-+
- 	err = register_netdev(bgmac->net_dev);
- 	if (err) {
- 		dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1556,6 +1576,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
- 
- void bgmac_enet_remove(struct bgmac *bgmac)
- {
-+	if (bgmac->b53_device)
-+		platform_device_unregister(&bgmac_b53_dev);
-+	bgmac->b53_device = NULL;
-+
- 	unregister_netdev(bgmac->net_dev);
- 	phy_disconnect(bgmac->net_dev->phydev);
- 	netif_napi_del(&bgmac->napi);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -409,6 +409,7 @@
- #define BGMAC_FEAT_CC4_IF_SW_TYPE	BIT(17)
- #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII	BIT(18)
- #define BGMAC_FEAT_CC7_IF_TYPE_RGMII	BIT(19)
-+#define BGMAC_FEAT_SRAB			BIT(20)
- 
- struct bgmac_slot_info {
- 	union {
-@@ -513,6 +514,9 @@ struct bgmac {
- 	u32 (*get_bus_clock)(struct bgmac *bgmac);
- 	void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
- 			      u32 set);
-+
-+	/* platform device for associated switch */
-+	struct platform_device *b53_device;
- };
- 
- struct bgmac *bgmac_alloc(struct device *dev);
diff --git a/target/linux/generic/hack-4.9/835-misc-owl_loader.patch b/target/linux/generic/hack-4.9/835-misc-owl_loader.patch
deleted file mode 100644
index 07cd4e580a..0000000000
--- a/target/linux/generic/hack-4.9/835-misc-owl_loader.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From dd36f935973d91644449bd9749f6062a2bed821b Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Fri, 7 Jul 2017 17:26:46 +0200
-Subject: misc: owl-loader for delayed Atheros ath9k fixup
-
-Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
-need to be able to initialize the PCIe wifi device. Normally, this is done
-during the early stages of booting linux, because the necessary init code
-is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup.
-However,this isn't possible for devices which have the init code for the
-Atheros chip stored on NAND in an UBI volume. Hence, this module can be
-used to initialze the chip when the user-space is ready to extract the
-init code.
-
-Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
----
- drivers/misc/Kconfig  | 12 ++++++++++++
- drivers/misc/Makefile |  1 +
- 2 files changed, 13 insertions(+)
-
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -151,6 +151,18 @@ config SGI_IOC4
- 	  If you have an SGI Altix with an IOC4-based card say Y.
- 	  Otherwise say N.
- 
-+config OWL_LOADER
-+	tristate "Owl loader for initializing Atheros PCI(e) Wifi chips"
-+	depends on PCI
-+	---help---
-+	This kernel module helps to initialize certain Qualcomm
-+	Atheros' PCI(e) Wifi chips, which have the init data
-+	(which contains the PCI device ID for example) stored
-+	together with the calibration data in the file system.
-+
-+	This is necessary for devices like the Cisco Meraki Z1, say M.
-+	Otherwise say N.
-+
- config TIFM_CORE
- 	tristate "TI Flash Media interface support"
- 	depends on PCI
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib
- obj-$(CONFIG_DUMMY_IRQ)		+= dummy-irq.o
- obj-$(CONFIG_ICS932S401)	+= ics932s401.o
- obj-$(CONFIG_LKDTM)		+= lkdtm.o
-+obj-$(CONFIG_OWL_LOADER)	+= owl-loader.o
- obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
- obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
- obj-$(CONFIG_PHANTOM)		+= phantom.o
diff --git a/target/linux/generic/hack-4.9/901-debloat_sock_diag.patch b/target/linux/generic/hack-4.9/901-debloat_sock_diag.patch
deleted file mode 100644
index 1d33ab3e6f..0000000000
--- a/target/linux/generic/hack-4.9/901-debloat_sock_diag.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 3b6115d6b57a263bdc8c9b1df273bd4a7955eead Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:16:31 +0200
-Subject: debloat: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/Kconfig         | 3 +++
- net/core/Makefile   | 3 ++-
- net/core/sock.c     | 2 ++
- net/ipv4/Kconfig    | 1 +
- net/netlink/Kconfig | 1 +
- net/packet/Kconfig  | 1 +
- net/unix/Kconfig    | 1 +
- 7 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -95,6 +95,9 @@ source "net/netlabel/Kconfig"
- 
- endif # if INET
- 
-+config SOCK_DIAG
-+	bool
-+
- config NETWORK_SECMARK
- 	bool "Security Marking"
- 	help
---- a/net/core/Makefile
-+++ b/net/core/Makefile
-@@ -9,8 +9,9 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.
- 
- obj-y		     += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \
- 			neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
--			sock_diag.o dev_ioctl.o tso.o sock_reuseport.o
-+			dev_ioctl.o tso.o sock_reuseport.o
- 
-+obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
- obj-$(CONFIG_XFRM) += flow.o
- obj-y += net-sysfs.o
- obj-$(CONFIG_PROC_FS) += net-procfs.o
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -1458,9 +1458,11 @@ void sk_destruct(struct sock *sk)
- 
- static void __sk_free(struct sock *sk)
- {
-+#ifdef CONFIG_SOCK_DIAG
- 	if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
- 		sock_diag_broadcast_destroy(sk);
- 	else
-+#endif
- 		sk_destruct(sk);
- }
- 
---- a/net/ipv4/Kconfig
-+++ b/net/ipv4/Kconfig
-@@ -408,6 +408,7 @@ config INET_XFRM_MODE_BEET
- 
- config INET_DIAG
- 	tristate "INET: socket monitoring interface"
-+	select SOCK_DIAG
- 	default y
- 	---help---
- 	  Support for INET (TCP, DCCP, etc) socket monitoring interface used by
---- a/net/netlink/Kconfig
-+++ b/net/netlink/Kconfig
-@@ -4,6 +4,7 @@
- 
- config NETLINK_DIAG
- 	tristate "NETLINK: socket monitoring interface"
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for NETLINK socket monitoring interface used by the ss tool.
---- a/net/packet/Kconfig
-+++ b/net/packet/Kconfig
-@@ -18,6 +18,7 @@ config PACKET
- config PACKET_DIAG
- 	tristate "Packet: sockets monitoring interface"
- 	depends on PACKET
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for PF_PACKET sockets monitoring interface used by the ss tool.
---- a/net/unix/Kconfig
-+++ b/net/unix/Kconfig
-@@ -22,6 +22,7 @@ config UNIX
- config UNIX_DIAG
- 	tristate "UNIX: socket monitoring interface"
- 	depends on UNIX
-+	select SOCK_DIAG
- 	default n
- 	---help---
- 	  Support for UNIX socket monitoring interface used by the ss tool.
diff --git a/target/linux/generic/hack-4.9/902-debloat_proc.patch b/target/linux/generic/hack-4.9/902-debloat_proc.patch
deleted file mode 100644
index ee72d984f9..0000000000
--- a/target/linux/generic/hack-4.9/902-debloat_proc.patch
+++ /dev/null
@@ -1,406 +0,0 @@
-From 9e3f1d0805b2d919904dd9a4ff0d956314cc3cba Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:09 +0200
-Subject: debloat: procfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/locks.c               |  2 ++
- fs/proc/Kconfig          |  5 +++++
- fs/proc/consoles.c       |  3 +++
- fs/proc/proc_tty.c       | 11 ++++++++++-
- include/net/snmp.h       | 18 +++++++++++++++++-
- ipc/msg.c                |  3 +++
- ipc/sem.c                |  2 ++
- ipc/shm.c                |  2 ++
- ipc/util.c               |  3 +++
- kernel/exec_domain.c     |  2 ++
- kernel/irq/proc.c        |  9 +++++++++
- kernel/time/timer_list.c |  2 ++
- mm/vmalloc.c             |  2 ++
- mm/vmstat.c              |  8 +++++---
- net/8021q/vlanproc.c     |  6 ++++++
- net/core/net-procfs.c    | 18 ++++++++++++------
- net/core/sock.c          |  2 ++
- net/ipv4/fib_trie.c      | 18 ++++++++++++------
- net/ipv4/proc.c          |  3 +++
- net/ipv4/route.c         |  3 +++
- 20 files changed, 105 insertions(+), 17 deletions(-)
-
---- a/fs/locks.c
-+++ b/fs/locks.c
-@@ -2802,6 +2802,8 @@ static const struct file_operations proc
- 
- static int __init proc_locks_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create("locks", 0, NULL, &proc_locks_operations);
- 	return 0;
- }
---- a/fs/proc/Kconfig
-+++ b/fs/proc/Kconfig
-@@ -81,3 +81,8 @@ config PROC_CHILDREN
- 
- 	  Say Y if you are running any user-space software which takes benefit from
- 	  this interface. For example, rkt is such a piece of software.
-+
-+config PROC_STRIPPED
-+	default n
-+	depends on EXPERT
-+	bool "Strip non-essential /proc functionality to reduce code size"
---- a/fs/proc/consoles.c
-+++ b/fs/proc/consoles.c
-@@ -106,6 +106,9 @@ static const struct file_operations proc
- 
- static int __init proc_consoles_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	proc_create("consoles", 0, NULL, &proc_consoles_operations);
- 	return 0;
- }
---- a/fs/proc/proc_tty.c
-+++ b/fs/proc/proc_tty.c
-@@ -144,7 +144,10 @@ static const struct file_operations proc
- void proc_tty_register_driver(struct tty_driver *driver)
- {
- 	struct proc_dir_entry *ent;
--		
-+
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!driver->driver_name || driver->proc_entry ||
- 	    !driver->ops->proc_fops)
- 		return;
-@@ -161,6 +164,9 @@ void proc_tty_unregister_driver(struct t
- {
- 	struct proc_dir_entry *ent;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ent = driver->proc_entry;
- 	if (!ent)
- 		return;
-@@ -175,6 +181,9 @@ void proc_tty_unregister_driver(struct t
-  */
- void __init proc_tty_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!proc_mkdir("tty", NULL))
- 		return;
- 	proc_mkdir("tty/ldisc", NULL);	/* Preserved: it's userspace visible */
---- a/include/net/snmp.h
-+++ b/include/net/snmp.h
-@@ -123,6 +123,21 @@ struct linux_xfrm_mib {
- #define DECLARE_SNMP_STAT(type, name)	\
- 	extern __typeof__(type) __percpu *name
- 
-+#ifdef CONFIG_PROC_STRIPPED
-+#define __SNMP_STATS_DUMMY(mib)	\
-+	do { (void) mib->mibs[0]; } while(0)
-+
-+#define __SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_DEC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+
-+#else
-+
- #define __SNMP_INC_STATS(mib, field)	\
- 			__this_cpu_inc(mib->mibs[field])
- 
-@@ -153,8 +168,9 @@ struct linux_xfrm_mib {
- 		__this_cpu_add(ptr[basefield##OCTETS], addend);	\
- 	} while (0)
- 
-+#endif
- 
--#if BITS_PER_LONG==32
-+#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED)
- 
- #define __SNMP_ADD_STATS64(mib, field, addend) 				\
- 	do {								\
---- a/ipc/msg.c
-+++ b/ipc/msg.c
-@@ -1061,6 +1061,9 @@ void __init msg_init(void)
- {
- 	msg_init_ns(&init_ipc_ns);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ipc_init_proc_interface("sysvipc/msg",
- 				"       key      msqid perms      cbytes       qnum lspid lrpid   uid   gid  cuid  cgid      stime      rtime      ctime\n",
- 				IPC_MSG_IDS, sysvipc_msg_proc_show);
---- a/ipc/sem.c
-+++ b/ipc/sem.c
-@@ -205,6 +205,8 @@ void sem_exit_ns(struct ipc_namespace *n
- void __init sem_init(void)
- {
- 	sem_init_ns(&init_ipc_ns);
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/sem",
- 				"       key      semid perms      nsems   uid   gid  cuid  cgid      otime      ctime\n",
- 				IPC_SEM_IDS, sysvipc_sem_proc_show);
---- a/ipc/shm.c
-+++ b/ipc/shm.c
-@@ -118,6 +118,8 @@ pure_initcall(ipc_ns_init);
- 
- void __init shm_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/shm",
- #if BITS_PER_LONG <= 32
- 				"       key      shmid perms       size  cpid  lpid nattch   uid   gid  cuid  cgid      atime      dtime      ctime        rss       swap\n",
---- a/ipc/util.c
-+++ b/ipc/util.c
-@@ -121,6 +121,9 @@ void __init ipc_init_proc_interface(cons
- 	struct proc_dir_entry *pde;
- 	struct ipc_proc_iface *iface;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	iface = kmalloc(sizeof(*iface), GFP_KERNEL);
- 	if (!iface)
- 		return;
---- a/kernel/exec_domain.c
-+++ b/kernel/exec_domain.c
-@@ -41,6 +41,8 @@ static const struct file_operations exec
- 
- static int __init proc_execdomains_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create("execdomains", 0, NULL, &execdomains_proc_fops);
- 	return 0;
- }
---- a/kernel/irq/proc.c
-+++ b/kernel/irq/proc.c
-@@ -326,6 +326,9 @@ void register_irq_proc(unsigned int irq,
- 	static DEFINE_MUTEX(register_lock);
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
- 		return;
- 
-@@ -374,6 +377,9 @@ void unregister_irq_proc(unsigned int ir
- {
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || !desc->dir)
- 		return;
- #ifdef CONFIG_SMP
-@@ -408,6 +414,9 @@ void init_irq_proc(void)
- 	unsigned int irq;
- 	struct irq_desc *desc;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	/* create /proc/irq */
- 	root_irq_dir = proc_mkdir("irq", NULL);
- 	if (!root_irq_dir)
---- a/kernel/time/timer_list.c
-+++ b/kernel/time/timer_list.c
-@@ -399,6 +399,9 @@ static int __init init_timer_list_procfs
- {
- 	struct proc_dir_entry *pe;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	pe = proc_create("timer_list", 0400, NULL, &timer_list_fops);
- 	if (!pe)
- 		return -ENOMEM;
---- a/mm/vmalloc.c
-+++ b/mm/vmalloc.c
-@@ -2718,6 +2718,8 @@ static const struct file_operations proc
- 
- static int __init proc_vmalloc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create("vmallocinfo", S_IRUSR, NULL, &proc_vmalloc_operations);
- 	return 0;
- }
---- a/mm/vmstat.c
-+++ b/mm/vmstat.c
-@@ -1793,10 +1793,12 @@ static int __init setup_vmstat(void)
- 	cpu_notifier_register_done();
- #endif
- #ifdef CONFIG_PROC_FS
--	proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations);
--	proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations);
-+		proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops);
-+		proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations);
-+	}
- 	proc_create("vmstat", S_IRUGO, NULL, &proc_vmstat_file_operations);
--	proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations);
- #endif
- 	return 0;
- }
---- a/net/8021q/vlanproc.c
-+++ b/net/8021q/vlanproc.c
-@@ -127,6 +127,9 @@ void vlan_proc_cleanup(struct net *net)
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (vn->proc_vlan_conf)
- 		remove_proc_entry(name_conf, vn->proc_vlan_dir);
- 
-@@ -146,6 +149,9 @@ int __net_init vlan_proc_init(struct net
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net);
- 	if (!vn->proc_vlan_dir)
- 		goto err;
---- a/net/core/net-procfs.c
-+++ b/net/core/net-procfs.c
-@@ -319,10 +319,12 @@ static int __net_init dev_proc_net_init(
- 
- 	if (!proc_create("dev", S_IRUGO, net->proc_net, &dev_seq_fops))
- 		goto out;
--	if (!proc_create("softnet_stat", S_IRUGO, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+		!proc_create("softnet_stat", S_IRUGO, net->proc_net,
- 			 &softnet_seq_fops))
- 		goto out_dev;
--	if (!proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops))
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+		!proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops))
- 		goto out_softnet;
- 
- 	if (wext_proc_init(net))
-@@ -331,9 +333,11 @@ static int __net_init dev_proc_net_init(
- out:
- 	return rc;
- out_ptype:
--	remove_proc_entry("ptype", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("ptype", net->proc_net);
- out_softnet:
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("softnet_stat", net->proc_net);
- out_dev:
- 	remove_proc_entry("dev", net->proc_net);
- 	goto out;
-@@ -343,8 +347,10 @@ static void __net_exit dev_proc_net_exit
- {
- 	wext_proc_exit(net);
- 
--	remove_proc_entry("ptype", net->proc_net);
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("ptype", net->proc_net);
-+		remove_proc_entry("softnet_stat", net->proc_net);
-+	}
- 	remove_proc_entry("dev", net->proc_net);
- }
- 
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -3088,6 +3088,8 @@ static __net_initdata struct pernet_oper
- 
- static int __init proto_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	return register_pernet_subsys(&proto_net_ops);
- }
- 
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2677,10 +2677,12 @@ static const struct file_operations fib_
- 
- int __net_init fib_proc_init(struct net *net)
- {
--	if (!proc_create("fib_trie", S_IRUGO, net->proc_net, &fib_trie_fops))
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+		!proc_create("fib_trie", S_IRUGO, net->proc_net, &fib_trie_fops))
- 		goto out1;
- 
--	if (!proc_create("fib_triestat", S_IRUGO, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+		!proc_create("fib_triestat", S_IRUGO, net->proc_net,
- 			 &fib_triestat_fops))
- 		goto out2;
- 
-@@ -2690,17 +2692,21 @@ int __net_init fib_proc_init(struct net
- 	return 0;
- 
- out3:
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_triestat", net->proc_net);
- out2:
--	remove_proc_entry("fib_trie", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_trie", net->proc_net);
- out1:
- 	return -ENOMEM;
- }
- 
- void __net_exit fib_proc_exit(struct net *net)
- {
--	remove_proc_entry("fib_trie", net->proc_net);
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("fib_trie", net->proc_net);
-+		remove_proc_entry("fib_triestat", net->proc_net);
-+	}
- 	remove_proc_entry("route", net->proc_net);
- }
- 
---- a/net/ipv4/proc.c
-+++ b/net/ipv4/proc.c
-@@ -565,6 +565,9 @@ static __net_initdata struct pernet_oper
- 
- int __init ip_misc_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_proc_ops);
- }
- 
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -423,6 +423,9 @@ static struct pernet_operations ip_rt_pr
- 
- static int __init ip_rt_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_rt_proc_ops);
- }
- 
diff --git a/target/linux/generic/hack-4.9/904-debloat_dma_buf.patch b/target/linux/generic/hack-4.9/904-debloat_dma_buf.patch
deleted file mode 100644
index da69b7e784..0000000000
--- a/target/linux/generic/hack-4.9/904-debloat_dma_buf.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From e3692cb2fcd5ba1244512a0f43b8118f65f1c375 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:43 +0200
-Subject: debloat: dmabuf
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/Kconfig      |  2 +-
- drivers/dma-buf/Makefile  | 10 +++++++---
- drivers/dma-buf/dma-buf.c |  4 +++-
- kernel/sched/core.c       |  1 +
- 4 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/base/Kconfig
-+++ b/drivers/base/Kconfig
-@@ -244,7 +244,7 @@ config SOC_BUS
- source "drivers/base/regmap/Kconfig"
- 
- config DMA_SHARED_BUFFER
--	bool
-+	tristate
- 	default n
- 	select ANON_INODES
- 	help
---- a/drivers/dma-buf/Makefile
-+++ b/drivers/dma-buf/Makefile
-@@ -1,3 +1,7 @@
--obj-y := dma-buf.o fence.o reservation.o seqno-fence.o fence-array.o
--obj-$(CONFIG_SYNC_FILE)		+= sync_file.o
--obj-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
-+obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o
-+
-+dma-buf-objs-y := dma-buf.o fence.o reservation.o seqno-fence.o fence-array.o
-+dma-buf-objs-$(CONFIG_SYNC_FILE)		+= sync_file.o
-+dma-buf-objs-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
-+
-+dma-shared-buffer-objs :=  $(dma-buf-objs-y)
---- a/drivers/dma-buf/dma-buf.c
-+++ b/drivers/dma-buf/dma-buf.c
-@@ -34,6 +34,7 @@
- #include <linux/poll.h>
- #include <linux/reservation.h>
- #include <linux/mm.h>
-+#include <linux/module.h>
- 
- #include <uapi/linux/dma-buf.h>
- 
-@@ -977,4 +978,5 @@ static void __exit dma_buf_deinit(void)
- {
- 	dma_buf_uninit_debugfs();
- }
--__exitcall(dma_buf_deinit);
-+module_exit(dma_buf_deinit);
-+MODULE_LICENSE("GPL");
---- a/kernel/sched/core.c
-+++ b/kernel/sched/core.c
-@@ -2171,6 +2171,7 @@ int wake_up_state(struct task_struct *p,
- {
- 	return try_to_wake_up(p, state, 0);
- }
-+EXPORT_SYMBOL_GPL(wake_up_state);
- 
- /*
-  * This function clears the sched_dl_entity static params.
diff --git a/target/linux/generic/hack-4.9/910-kobject_uevent.patch b/target/linux/generic/hack-4.9/910-kobject_uevent.patch
deleted file mode 100644
index 734401e1c6..0000000000
--- a/target/linux/generic/hack-4.9/910-kobject_uevent.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -52,6 +52,18 @@ static const char *kobject_actions[] = {
- 	[KOBJ_OFFLINE] =	"offline",
- };
- 
-+u64 uevent_next_seqnum(void)
-+{
-+	u64 seq;
-+
-+	mutex_lock(&uevent_sock_mutex);
-+	seq = ++uevent_seqnum;
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	return seq;
-+}
-+EXPORT_SYMBOL_GPL(uevent_next_seqnum);
-+
- /**
-  * kobject_action_type - translate action string to numeric type
-  *
diff --git a/target/linux/generic/hack-4.9/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/hack-4.9/911-kobject_add_broadcast_uevent.patch
deleted file mode 100644
index d827ace9e0..0000000000
--- a/target/linux/generic/hack-4.9/911-kobject_add_broadcast_uevent.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/include/linux/kobject.h
-+++ b/include/linux/kobject.h
-@@ -32,6 +32,8 @@
- #define UEVENT_NUM_ENVP			32	/* number of env pointers */
- #define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
- 
-+struct sk_buff;
-+
- #ifdef CONFIG_UEVENT_HELPER
- /* path to the userspace helper executed on an event */
- extern char uevent_helper[];
-@@ -239,4 +241,7 @@ int add_uevent_var(struct kobj_uevent_en
- int kobject_action_type(const char *buf, size_t count,
- 			enum kobject_action *type);
- 
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation);
-+
- #endif /* _KOBJECT_H_ */
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -423,6 +423,43 @@ int add_uevent_var(struct kobj_uevent_en
- EXPORT_SYMBOL_GPL(add_uevent_var);
- 
- #if defined(CONFIG_NET)
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	struct uevent_sock *ue_sk;
-+	int err = 0;
-+
-+	/* send netlink message */
-+	mutex_lock(&uevent_sock_mutex);
-+	list_for_each_entry(ue_sk, &uevent_sock_list, list) {
-+		struct sock *uevent_sock = ue_sk->sk;
-+		struct sk_buff *skb2;
-+
-+		skb2 = skb_clone(skb, allocation);
-+		if (!skb2)
-+			break;
-+
-+		err = netlink_broadcast(uevent_sock, skb2, pid, group,
-+					allocation);
-+		if (err)
-+			break;
-+	}
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	kfree_skb(skb);
-+	return err;
-+}
-+#else
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	kfree_skb(skb);
-+	return 0;
-+}
-+#endif
-+EXPORT_SYMBOL_GPL(broadcast_uevent);
-+
-+#if defined(CONFIG_NET)
- static int uevent_net_init(struct net *net)
- {
- 	struct uevent_sock *ue_sk;
diff --git a/target/linux/generic/hack-4.9/921-always-create-console-node-in-initramfs.patch b/target/linux/generic/hack-4.9/921-always-create-console-node-in-initramfs.patch
deleted file mode 100644
index 6eeddcc3c6..0000000000
--- a/target/linux/generic/hack-4.9/921-always-create-console-node-in-initramfs.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 5d301596fdc72f6cb672f72eb3c66e7cddefb103 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:26:02 +0200
-Subject: initramfs: always create console node
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- scripts/gen_initramfs_list.sh | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/scripts/gen_initramfs_list.sh
-+++ b/scripts/gen_initramfs_list.sh
-@@ -59,6 +59,18 @@ default_initramfs() {
- 	EOF
- }
- 
-+list_openwrt_initramfs() {
-+	:
-+}
-+
-+openwrt_initramfs() {
-+	# make sure that /dev/console exists
-+	cat <<-EOF >> ${output}
-+		dir /dev 0755 0 0
-+		nod /dev/console 0600 0 0 c 5 1
-+	EOF
-+}
-+
- filetype() {
- 	local argv1="$1"
- 
-@@ -180,6 +192,8 @@ dir_filelist() {
- 	if [  "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then
- 		${dep_list}print_mtime "$1"
- 
-+		${dep_list}openwrt_initramfs
-+
- 		echo "${dirlist}" | \
- 		while read x; do
- 			${dep_list}parse ${x}
diff --git a/target/linux/generic/hack-4.9/930-crashlog.patch b/target/linux/generic/hack-4.9/930-crashlog.patch
deleted file mode 100644
index baa87b1b7f..0000000000
--- a/target/linux/generic/hack-4.9/930-crashlog.patch
+++ /dev/null
@@ -1,338 +0,0 @@
-From 6b1ab74a9917012d0c559edc4ed299d9228ac89f Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:26:47 +0200
-Subject: kernel: add the new 'crashlog' feature
-
-this tries to store kernel oops/panic logs in a fixed location in RAM to
-recover them available to user space using debugfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/crashlog.h |  17 ++++
- init/Kconfig             |   4 +
- kernel/Makefile          |   1 +
- kernel/crashlog.c        | 213 +++++++++++++++++++++++++++++++++++++++++++++++
- kernel/module.c          |   3 +
- mm/bootmem.c             |   2 +
- mm/memblock.c            |   5 ++
- 7 files changed, 245 insertions(+)
- create mode 100644 include/linux/crashlog.h
- create mode 100644 kernel/crashlog.c
-
---- /dev/null
-+++ b/include/linux/crashlog.h
-@@ -0,0 +1,17 @@
-+#ifndef __CRASHLOG_H
-+#define __CRASHLOG_H
-+
-+#ifdef CONFIG_CRASHLOG
-+void crashlog_init_bootmem(struct bootmem_data *bdata);
-+void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size);
-+#else
-+static inline void crashlog_init_bootmem(struct bootmem_data *bdata)
-+{
-+}
-+
-+static inline void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
-+{
-+}
-+#endif
-+
-+#endif
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1298,6 +1298,10 @@ config RELAY
- 
- 	  If unsure, say N.
- 
-+config CRASHLOG
-+	bool "Crash logging"
-+	depends on (!NO_BOOTMEM || HAVE_MEMBLOCK)
-+
- config BLK_DEV_INITRD
- 	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
- 	depends on BROKEN || !FRV
---- a/kernel/Makefile
-+++ b/kernel/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_TORTURE_TEST) += torture.o
- obj-$(CONFIG_MEMBARRIER) += membarrier.o
- 
- obj-$(CONFIG_HAS_IOMEM) += memremap.o
-+obj-$(CONFIG_CRASHLOG) += crashlog.o
- 
- $(obj)/configs.o: $(obj)/config_data.h
- 
---- /dev/null
-+++ b/kernel/crashlog.c
-@@ -0,0 +1,213 @@
-+/*
-+ * Crash information logger
-+ * Copyright (C) 2010 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * Based on ramoops.c
-+ *   Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/bootmem.h>
-+#include <linux/memblock.h>
-+#include <linux/debugfs.h>
-+#include <linux/crashlog.h>
-+#include <linux/kmsg_dump.h>
-+#include <linux/module.h>
-+#include <linux/pfn.h>
-+#include <linux/vmalloc.h>
-+#include <asm/io.h>
-+
-+#define CRASHLOG_PAGES	4
-+#define CRASHLOG_SIZE	(CRASHLOG_PAGES * PAGE_SIZE)
-+#define CRASHLOG_MAGIC	0xa1eedead
-+
-+/*
-+ * Start the log at 1M before the end of RAM, as some boot loaders like
-+ * to use the end of the RAM for stack usage and other things
-+ * If this fails, fall back to using the last part.
-+ */
-+#define CRASHLOG_OFFSET	(1024 * 1024)
-+
-+struct crashlog_data {
-+	u32 magic;
-+	u32 len;
-+	u8 data[];
-+};
-+
-+static struct debugfs_blob_wrapper crashlog_blob;
-+static unsigned long crashlog_addr = 0;
-+static struct crashlog_data *crashlog_buf;
-+static struct kmsg_dumper dump;
-+static bool first = true;
-+
-+extern struct list_head *crashlog_modules;
-+
-+static bool crashlog_set_addr(phys_addr_t addr, phys_addr_t size)
-+{
-+	/* Limit to lower 64 MB to avoid highmem */
-+	phys_addr_t limit = 64 * 1024 * 1024;
-+
-+	if (crashlog_addr)
-+		return false;
-+
-+	if (addr > limit)
-+		return false;
-+
-+	if (addr + size > limit)
-+		size = limit - addr;
-+
-+	crashlog_addr = addr;
-+
-+	if (addr + size > CRASHLOG_OFFSET)
-+		crashlog_addr += size - CRASHLOG_OFFSET;
-+
-+	return true;
-+}
-+
-+#ifndef CONFIG_NO_BOOTMEM
-+void __init crashlog_init_bootmem(bootmem_data_t *bdata)
-+{
-+	phys_addr_t start, end;
-+
-+	start = PFN_PHYS(bdata->node_low_pfn);
-+	end = PFN_PHYS(bdata->node_min_pfn);
-+	if (!crashlog_set_addr(start, end - start))
-+		return;
-+
-+	if (reserve_bootmem(crashlog_addr, CRASHLOG_SIZE, BOOTMEM_EXCLUSIVE) < 0) {
-+		printk("Crashlog failed to allocate RAM at address 0x%lx\n",
-+		       crashlog_addr);
-+		crashlog_addr = 0;
-+	}
-+}
-+#endif
-+
-+#ifdef CONFIG_HAVE_MEMBLOCK
-+void __init_memblock crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
-+{
-+	if (!crashlog_set_addr(addr, size))
-+		return;
-+
-+	if (memblock_reserve(crashlog_addr, CRASHLOG_SIZE)) {
-+		printk("Crashlog failed to allocate RAM at address 0x%lx\n",
-+		       crashlog_addr);
-+		crashlog_addr = 0;
-+	}
-+}
-+#endif
-+
-+static void __init crashlog_copy(void)
-+{
-+	if (crashlog_buf->magic != CRASHLOG_MAGIC)
-+		return;
-+
-+	if (!crashlog_buf->len || crashlog_buf->len >
-+	    CRASHLOG_SIZE - sizeof(*crashlog_buf))
-+		return;
-+
-+	crashlog_blob.size = crashlog_buf->len;
-+	crashlog_blob.data = kmemdup(crashlog_buf->data,
-+		crashlog_buf->len, GFP_KERNEL);
-+
-+	debugfs_create_blob("crashlog", 0700, NULL, &crashlog_blob);
-+}
-+
-+static int get_maxlen(void)
-+{
-+	return CRASHLOG_SIZE - sizeof(*crashlog_buf) - crashlog_buf->len;
-+}
-+
-+static void crashlog_printf(const char *fmt, ...)
-+{
-+	va_list args;
-+	int len = get_maxlen();
-+
-+	if (!len)
-+		return;
-+
-+	va_start(args, fmt);
-+	crashlog_buf->len += vscnprintf(
-+		&crashlog_buf->data[crashlog_buf->len],
-+		len, fmt, args);
-+	va_end(args);
-+}
-+
-+static void crashlog_do_dump(struct kmsg_dumper *dumper,
-+		enum kmsg_dump_reason reason)
-+{
-+	struct timeval tv;
-+	struct module *m;
-+	char *buf;
-+	size_t len;
-+
-+	if (!first)
-+		crashlog_printf("\n===================================\n");
-+
-+	do_gettimeofday(&tv);
-+	crashlog_printf("Time: %lu.%lu\n",
-+		(long)tv.tv_sec, (long)tv.tv_usec);
-+
-+	if (first) {
-+		crashlog_printf("Modules:");
-+		list_for_each_entry(m, crashlog_modules, list) {
-+			crashlog_printf("\t%s@%p+%x", m->name,
-+			m->core_layout.base, m->core_layout.size,
-+			m->init_layout.base, m->init_layout.size);
-+		}
-+		crashlog_printf("\n");
-+		first = false;
-+	}
-+
-+	buf = (char *)&crashlog_buf->data[crashlog_buf->len];
-+
-+	kmsg_dump_get_buffer(dumper, true, buf, get_maxlen(), &len);
-+
-+	crashlog_buf->len += len;
-+}
-+
-+
-+int __init crashlog_init_fs(void)
-+{
-+	struct page *pages[CRASHLOG_PAGES];
-+	pgprot_t prot;
-+	int i;
-+
-+	if (!crashlog_addr) {
-+		printk("No memory allocated for crashlog\n");
-+		return -ENOMEM;
-+	}
-+
-+	printk("Crashlog allocated RAM at address 0x%lx\n", (unsigned long) crashlog_addr);
-+	for (i = 0; i < CRASHLOG_PAGES; i++)
-+		pages[i] = pfn_to_page((crashlog_addr >> PAGE_SHIFT) + i);
-+
-+	prot = pgprot_writecombine(PAGE_KERNEL);
-+	crashlog_buf = vmap(pages, CRASHLOG_PAGES, VM_MAP, prot);
-+
-+	crashlog_copy();
-+
-+	crashlog_buf->magic = CRASHLOG_MAGIC;
-+	crashlog_buf->len = 0;
-+
-+	dump.max_reason = KMSG_DUMP_OOPS;
-+	dump.dump = crashlog_do_dump;
-+	kmsg_dump_register(&dump);
-+
-+	return 0;
-+}
-+module_init(crashlog_init_fs);
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -253,6 +253,9 @@ static void mod_update_bounds(struct mod
- #ifdef CONFIG_KGDB_KDB
- struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
- #endif /* CONFIG_KGDB_KDB */
-+#ifdef CONFIG_CRASHLOG
-+struct list_head *crashlog_modules = &modules;
-+#endif
- 
- static void module_assert_mutex(void)
- {
---- a/mm/bootmem.c
-+++ b/mm/bootmem.c
-@@ -14,6 +14,7 @@
- #include <linux/export.h>
- #include <linux/kmemleak.h>
- #include <linux/range.h>
-+#include <linux/crashlog.h>
- #include <linux/bug.h>
- #include <linux/io.h>
- #include <linux/bootmem.h>
-@@ -174,6 +175,7 @@ static unsigned long __init free_all_boo
- 	if (!bdata->node_bootmem_map)
- 		return 0;
- 
-+	crashlog_init_bootmem(bdata);
- 	map = bdata->node_bootmem_map;
- 	start = bdata->node_min_pfn;
- 	end = bdata->node_low_pfn;
---- a/mm/memblock.c
-+++ b/mm/memblock.c
-@@ -19,6 +19,7 @@
- #include <linux/debugfs.h>
- #include <linux/seq_file.h>
- #include <linux/memblock.h>
-+#include <linux/crashlog.h>
- 
- #include <asm/sections.h>
- #include <linux/io.h>
-@@ -495,6 +496,8 @@ static void __init_memblock memblock_ins
- 	memblock_set_region_node(rgn, nid);
- 	type->cnt++;
- 	type->total_size += size;
-+	if (type == &memblock.memory)
-+		crashlog_init_memblock(base, size);
- }
- 
- /**
-@@ -534,6 +537,8 @@ int __init_memblock memblock_add_range(s
- 		type->regions[0].flags = flags;
- 		memblock_set_region_node(&type->regions[0], nid);
- 		type->total_size = size;
-+		if (type == &memblock.memory)
-+			crashlog_init_memblock(base, size);
- 		return 0;
- 	}
- repeat:
diff --git a/target/linux/generic/pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch b/target/linux/generic/pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
deleted file mode 100644
index be9ceebc3a..0000000000
--- a/target/linux/generic/pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 18 Feb 2018 17:08:04 +0100
-Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio
-
-In devices, where fdt is used, is impossible to apply platform data
-without proper fdt node.
-
-This patch allow to use platform data in devices with fdt.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/w1/masters/w1-gpio.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/w1/masters/w1-gpio.c
-+++ b/drivers/w1/masters/w1-gpio.c
-@@ -79,7 +79,7 @@ static int w1_gpio_probe(struct platform
- 	enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
- 	int err;
- 
--	if (of_have_populated_dt()) {
-+	if (of_have_populated_dt() && !dev_get_platdata(&pdev->dev)) {
- 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- 		if (!pdata)
- 			return -ENOMEM;
diff --git a/target/linux/generic/pending-4.19/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch b/target/linux/generic/pending-4.19/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
deleted file mode 100644
index 0b87f493ec..0000000000
--- a/target/linux/generic/pending-4.19/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 18 Apr 2018 10:50:05 +0200
-Subject: [PATCH] MIPS: only process negative stack offsets on stack traces
-
-Fixes endless back traces in cases where the compiler emits a stack
-pointer increase in a branch delay slot (probably for some form of
-function return).
-
-[    3.475442] BUG: MAX_STACK_TRACE_ENTRIES too low!
-[    3.480070] turning off the locking correctness validator.
-[    3.485521] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.34 #0
-[    3.491475] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000034 00000000 00000000
-[    3.499764]         87c3838c 80696377 8061047c 00000000 00000001 00000001 87c2d850 6534689f
-[    3.508059]         00000000 00000000 80e10000 00000000 00000000 000000cf 0000000f 00000000
-[    3.516353]         00000000 806a0000 00076891 00000000 00000000 00000000 ffffffff 00000000
-[    3.524648]         806c0000 00000004 80e10000 806a0000 00000003 80690000 00000000 80700000
-[    3.532942]         ...
-[    3.535362] Call Trace:
-[    3.537818] [<80010a48>] show_stack+0x58/0x100
-[    3.542207] [<804c2f78>] dump_stack+0xe8/0x170
-[    3.546613] [<80079f90>] save_trace+0xf0/0x110
-[    3.551010] [<8007b1ec>] mark_lock+0x33c/0x78c
-[    3.555413] [<8007bf48>] __lock_acquire+0x2ac/0x1a08
-[    3.560337] [<8007de60>] lock_acquire+0x64/0x8c
-[    3.564846] [<804e1570>] _raw_spin_lock_irqsave+0x54/0x78
-[    3.570186] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.574770] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.579257] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.583839] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.588329] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.592911] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.597401] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.601983] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.606473] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.611055] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.615545] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.620125] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.624619] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.629197] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.633691] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.638269] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.642763] [<801b618c>] kernfs_notify+0x94/0xac
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/kernel/process.c
-+++ b/arch/mips/kernel/process.c
-@@ -361,6 +361,8 @@ static inline int is_sp_move_ins(union m
- 
- 	if (ip->i_format.opcode == addiu_op ||
- 	    ip->i_format.opcode == daddiu_op) {
-+		if (ip->i_format.simmediate > 0)
-+			return 0;
- 		*frame_size = -ip->i_format.simmediate;
- 		return 1;
- 	}
diff --git a/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch b/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch
deleted file mode 100644
index cad00b5527..0000000000
--- a/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Florian Fainelli <florian@openwrt.org>
-Subject: USB: EHCI: add ignore_oc flag to disable overcurrent checking
-
-This patch adds an ignore_oc flag which can be set by EHCI controller
-not supporting or wanting to disable overcurrent checking. The EHCI
-platform data in include/linux/usb/ehci_pdriver.h is also augmented to
-take advantage of this new flag.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      |    2 +-
- drivers/usb/host/ehci-hub.c      |    4 ++--
- drivers/usb/host/ehci-platform.c |    1 +
- drivers/usb/host/ehci.h          |    1 +
- include/linux/usb/ehci_pdriver.h |    1 +
- 5 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -638,7 +638,7 @@ static int ehci_run (struct usb_hcd *hcd
- 		"USB %x.%x started, EHCI %x.%02x%s\n",
- 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- 		temp >> 8, temp & 0xff,
--		ignore_oc ? ", overcurrent ignored" : "");
-+		(ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
- 
- 	ehci_writel(ehci, INTR_MASK,
- 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -641,7 +641,7 @@ ehci_hub_status_data (struct usb_hcd *hc
- 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
- 	 * PORT_POWER; that's surprising, but maybe within-spec.
- 	 */
--	if (!ignore_oc)
-+	if (!ignore_oc && !ehci->ignore_oc)
- 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
- 	else
- 		mask = PORT_CSC | PORT_PEC;
-@@ -1011,7 +1011,7 @@ int ehci_hub_control(
- 		if (temp & PORT_PEC)
- 			status |= USB_PORT_STAT_C_ENABLE << 16;
- 
--		if ((temp & PORT_OCC) && !ignore_oc){
-+		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
- 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
- 
- 			/*
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -208,6 +208,8 @@ static int ehci_platform_probe(struct pl
- 		hcd->has_tt = 1;
- 	if (pdata->reset_on_resume)
- 		priv->reset_on_resume = true;
-+	if (pdata->ignore_oc)
-+		ehci->ignore_oc = 1;
- 
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- 	if (ehci->big_endian_mmio) {
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -218,6 +218,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
- 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
- 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
-+	unsigned		ignore_oc:1;
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -50,6 +50,7 @@ struct usb_ehci_pdata {
- 	unsigned	no_io_watchdog:1;
- 	unsigned	reset_on_resume:1;
- 	unsigned	dma_mask_64:1;
-+	unsigned	ignore_oc:1;
- 
- 	/* Turn on all power and clocks */
- 	int (*power_on)(struct platform_device *pdev);
diff --git a/target/linux/generic/pending-4.19/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-4.19/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
deleted file mode 100644
index 3aca457660..0000000000
--- a/target/linux/generic/pending-4.19/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation
-
-An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any
-kernel beyond version 4.3 resulting in:
-
-BUG: Bad page state in process swapper  pfn:086ac
-
-bisect resulted in:
-
-a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit
-commit a1c34a3bf00af2cede839879502e12dc68491ad5
-Author: Laura Abbott <laura@labbott.name>
-Date:   Thu Nov 5 18:48:46 2015 -0800
-
-    mm: Don't offset memmap for flatmem
-
-    Srinivas Kandagatla reported bad page messages when trying to remove the
-    bottom 2MB on an ARM based IFC6410 board
-
-      BUG: Bad page state in process swapper  pfn:fffa8
-      page:ef7fb500 count:0 mapcount:0 mapping:  (null) index:0x0
-      flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked)
-      page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
-      bad because of flags:
-      flags: 0x200041(locked|active|mlocked)
-      Modules linked in:
-      CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty
-#816
-      Hardware name: Qualcomm (Flattened Device Tree)
-        unwind_backtrace
-        show_stack
-        dump_stack
-        bad_page
-        free_pages_prepare
-        free_hot_cold_page
-        __free_pages
-        free_highmem_page
-        mem_init
-        start_kernel
-      Disabling lock debugging due to kernel taint
-    [...]
-:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4
-0a8156f848733dfa21e16c196dfb6c0a76290709 M      mm
-
-This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by
-page_to_pfn anymore.
-
-The following output was generated with two hacked in printk statements:
-
-printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map -
-(pgdat->node_start_pfn - ARCH_PFN_OFFSET));
-		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
-			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
-printk("after %p\n", mem_map);
-
-Output:
-
-[    0.000000] before 8861b280 vs. 8861b280 or 8851b280
-[    0.000000] after 8851b280
-
-As seen in the first line mem_map with subtraction of offset does not equal the
-mem_map after subtraction of ARCH_PFN_OFFSET.
-
-After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the
-previously calculated offset is zero for the named platform it is able to boot
-4.4 and 4.9-rc7 again.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -6393,7 +6393,7 @@ static void __ref alloc_node_mem_map(str
- 		mem_map = NODE_DATA(0)->node_mem_map;
- #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
- 		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
--			mem_map -= offset;
-+			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
- #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
- 	}
- #endif
diff --git a/target/linux/generic/pending-4.19/130-add-linux-spidev-compatible-si3210.patch b/target/linux/generic/pending-4.19/130-add-linux-spidev-compatible-si3210.patch
deleted file mode 100644
index b00fb8ee2e..0000000000
--- a/target/linux/generic/pending-4.19/130-add-linux-spidev-compatible-si3210.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Giuseppe Lippolis <giu.lippolis@gmail.com>
-Subject: Add the linux,spidev compatible in spidev Several device in ramips have this binding in the dts
-
-Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
----
- drivers/spi/spidev.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -669,6 +669,7 @@ static const struct of_device_id spidev_
- 	{ .compatible = "lineartechnology,ltc2488" },
- 	{ .compatible = "ge,achc" },
- 	{ .compatible = "semtech,sx1301" },
-+	{ .compatible = "siliconlabs,si3210" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/target/linux/generic/pending-4.19/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch b/target/linux/generic/pending-4.19/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
deleted file mode 100644
index bd5ed6f888..0000000000
--- a/target/linux/generic/pending-4.19/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: spi: use gpio_set_value_cansleep for setting chipselect GPIO
-
-Sleeping is safe inside spi_transfer_one_message, and some GPIO chips
-need to sleep for setting values
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -733,7 +733,7 @@ static void spi_set_cs(struct spi_device
- 		enable = !enable;
- 
- 	if (gpio_is_valid(spi->cs_gpio)) {
--		gpio_set_value(spi->cs_gpio, !enable);
-+		gpio_set_value_cansleep(spi->cs_gpio, !enable);
- 		/* Some SPI masters need both GPIO CS & slave_select */
- 		if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
- 		    spi->controller->set_cs)
diff --git a/target/linux/generic/pending-4.19/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-4.19/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
deleted file mode 100644
index c97e93250b..0000000000
--- a/target/linux/generic/pending-4.19/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support
-
-It is required for renames on overlayfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -752,6 +752,24 @@ static int jffs2_mknod (struct inode *di
- 	return ret;
- }
- 
-+static int jffs2_whiteout (struct inode *old_dir, struct dentry *old_dentry)
-+{
-+	struct dentry *wh;
-+	int err;
-+
-+	wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
-+	if (!wh)
-+		return -ENOMEM;
-+
-+	err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE,
-+			  WHITEOUT_DEV);
-+	if (err)
-+		return err;
-+
-+	d_rehash(wh);
-+	return 0;
-+}
-+
- static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
- 			 struct inode *new_dir_i, struct dentry *new_dentry,
- 			 unsigned int flags)
-@@ -762,7 +780,7 @@ static int jffs2_rename (struct inode *o
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~RENAME_NOREPLACE)
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
- 		return -EINVAL;
- 
- 	/* The VFS will check for us and prevent trying to rename a
-@@ -828,9 +846,14 @@ static int jffs2_rename (struct inode *o
- 	if (d_is_dir(old_dentry) && !victim_f)
- 		inc_nlink(new_dir_i);
- 
--	/* Unlink the original */
--	ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
--			      old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
-+	if (flags & RENAME_WHITEOUT)
-+		/* Replace with whiteout */
-+		ret = jffs2_whiteout(old_dir_i, old_dentry);
-+	else
-+		/* Unlink the original */
-+		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-+				      old_dentry->d_name.name,
-+				      old_dentry->d_name.len, NULL, now);
- 
- 	/* We don't touch inode->i_nlink */
- 
diff --git a/target/linux/generic/pending-4.19/141-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-4.19/141-jffs2-add-RENAME_EXCHANGE-support.patch
deleted file mode 100644
index 093a73ab66..0000000000
--- a/target/linux/generic/pending-4.19/141-jffs2-add-RENAME_EXCHANGE-support.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: add RENAME_EXCHANGE support
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -777,18 +777,31 @@ static int jffs2_rename (struct inode *o
- 	int ret;
- 	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
- 	struct jffs2_inode_info *victim_f = NULL;
-+	struct inode *fst_inode = d_inode(old_dentry);
-+	struct inode *snd_inode = d_inode(new_dentry);
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE))
- 		return -EINVAL;
- 
-+	if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) {
-+		if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) {
-+			inc_nlink(new_dir_i);
-+			drop_nlink(old_dir_i);
-+		}
-+		else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) {
-+			drop_nlink(new_dir_i);
-+			inc_nlink(old_dir_i);
-+		}
-+	}
-+
- 	/* The VFS will check for us and prevent trying to rename a
- 	 * file over a directory and vice versa, but if it's a directory,
- 	 * the VFS can't check whether the victim is empty. The filesystem
- 	 * needs to do that for itself.
- 	 */
--	if (d_really_is_positive(new_dentry)) {
-+	if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) {
- 		victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
- 		if (d_is_dir(new_dentry)) {
- 			struct jffs2_full_dirent *fd;
-@@ -823,7 +836,7 @@ static int jffs2_rename (struct inode *o
- 	if (ret)
- 		return ret;
- 
--	if (victim_f) {
-+	if (victim_f && !(flags & RENAME_EXCHANGE)) {
- 		/* There was a victim. Kill it off nicely */
- 		if (d_is_dir(new_dentry))
- 			clear_nlink(d_inode(new_dentry));
-@@ -849,6 +862,12 @@ static int jffs2_rename (struct inode *o
- 	if (flags & RENAME_WHITEOUT)
- 		/* Replace with whiteout */
- 		ret = jffs2_whiteout(old_dir_i, old_dentry);
-+	else if (flags & RENAME_EXCHANGE)
-+		/* Replace the original */
-+		ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
-+				    d_inode(new_dentry)->i_ino, type,
-+				    old_dentry->d_name.name, old_dentry->d_name.len,
-+				    now);
- 	else
- 		/* Unlink the original */
- 		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -880,7 +899,7 @@ static int jffs2_rename (struct inode *o
- 		return ret;
- 	}
- 
--	if (d_is_dir(old_dentry))
-+	if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
- 		drop_nlink(old_dir_i);
- 
- 	new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
diff --git a/target/linux/generic/pending-4.19/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-4.19/150-bridge_allow_receiption_on_disabled_port.patch
deleted file mode 100644
index 2afdeef41a..0000000000
--- a/target/linux/generic/pending-4.19/150-bridge_allow_receiption_on_disabled_port.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Stephen Hemminger <stephen@networkplumber.org>
-Subject: bridge: allow receiption on disabled port
-
-When an ethernet device is enslaved to a bridge, and the bridge STP
-detects loss of carrier (or operational state down), then normally
-packet receiption is blocked.
-
-This breaks control applications like WPA which maybe expecting to
-receive packets to negotiate to bring link up. The bridge needs to
-block forwarding packets from these disabled ports, but there is no
-hard requirement to not allow local packet delivery.
-
-Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -195,6 +195,9 @@ static void __br_handle_local_finish(str
- /* note: already called with rcu_read_lock */
- static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
- {
-+	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
-+
-+	if (p->state != BR_STATE_DISABLED)
- 	__br_handle_local_finish(skb);
- 
- 	/* return 1 to signal the okfn() was called so it's ok to use the skb */
-@@ -291,6 +294,17 @@ rx_handler_result_t br_handle_frame(stru
- 
- forward:
- 	switch (p->state) {
-+	case BR_STATE_DISABLED:
-+		if (ether_addr_equal(p->br->dev->dev_addr, dest))
-+			skb->pkt_type = PACKET_HOST;
-+
-+		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
-+			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
-+			br_handle_local_finish) == 1) {
-+			return RX_HANDLER_PASS;
-+		}
-+		break;
-+
- 	case BR_STATE_FORWARDING:
- 		rhook = rcu_dereference(br_should_route_hook);
- 		if (rhook) {
diff --git a/target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch
deleted file mode 100644
index e496301e4e..0000000000
--- a/target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: phy: at803x: add support for AT8032
-
-Like AT8030, this PHY needs the GPIO reset workaround
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -62,8 +62,10 @@
- 
- #define ATH8030_PHY_ID 0x004dd076
- #define ATH8031_PHY_ID 0x004dd074
-+#define ATH8032_PHY_ID 0x004dd023
- #define ATH8035_PHY_ID 0x004dd072
- #define AT803X_PHY_ID_MASK			0xffffffef
-+#define AT8032_PHY_ID_MASK			0xffffffff
- 
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
-@@ -308,7 +310,7 @@ static void at803x_link_change_notify(st
- 	struct at803x_priv *priv = phydev->priv;
- 
- 	/*
--	 * Conduct a hardware reset for AT8030 every time a link loss is
-+	 * Conduct a hardware reset for AT8030/2 every time a link loss is
- 	 * signalled. This is necessary to circumvent a hardware bug that
- 	 * occurs when the cable is unplugged while TX packets are pending
- 	 * in the FIFO. In such cases, the FIFO enters an error mode it
-@@ -414,6 +416,24 @@ static struct phy_driver at803x_driver[]
- 	.aneg_done		= at803x_aneg_done,
- 	.ack_interrupt		= &at803x_ack_interrupt,
- 	.config_intr		= &at803x_config_intr,
-+}, {
-+	/* ATHEROS 8032 */
-+	.phy_id			= ATH8032_PHY_ID,
-+	.name			= "Atheros 8032 ethernet",
-+	.phy_id_mask		= AT8032_PHY_ID_MASK,
-+	.probe			= at803x_probe,
-+	.config_init		= at803x_config_init,
-+	.link_change_notify	= at803x_link_change_notify,
-+	.set_wol		= at803x_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	.features		= PHY_BASIC_FEATURES,
-+	.flags			= PHY_HAS_INTERRUPT,
-+	.config_aneg		= genphy_config_aneg,
-+	.read_status		= genphy_read_status,
-+	.ack_interrupt		= at803x_ack_interrupt,
-+	.config_intr		= at803x_config_intr,
- } };
- 
- module_phy_driver(at803x_driver);
-@@ -421,6 +441,7 @@ module_phy_driver(at803x_driver);
- static struct mdio_device_id __maybe_unused atheros_tbl[] = {
- 	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
- 	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
-+	{ ATH8032_PHY_ID, AT8032_PHY_ID_MASK },
- 	{ ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
- 	{ }
- };
diff --git a/target/linux/generic/pending-4.19/201-extra_optimization.patch b/target/linux/generic/pending-4.19/201-extra_optimization.patch
deleted file mode 100644
index 5890483ae4..0000000000
--- a/target/linux/generic/pending-4.19/201-extra_optimization.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Upgrade to Linux 2.6.19
-
-- Includes large parts of the patch from #1021 by dpalffy
-- Includes RB532 NAND driver changes by n0-1
-
-[john@phrozen.org: feix will add this to his upstream queue]
-
-lede-commit: bff468813f78f81e36ebb2a3f4354de7365e640f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -654,12 +654,12 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
- KBUILD_CFLAGS	+= $(call cc-disable-warning, int-in-bool-context)
- 
- ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
--KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
-+KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
- else
- ifdef CONFIG_PROFILE_ALL_BRANCHES
--KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,)
-+KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
- else
--KBUILD_CFLAGS   += -O2
-+KBUILD_CFLAGS   += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION)
- endif
- endif
- 
diff --git a/target/linux/generic/pending-4.19/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-4.19/203-kallsyms_uncompressed.patch
deleted file mode 100644
index 79e991022a..0000000000
--- a/target/linux/generic/pending-4.19/203-kallsyms_uncompressed.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
-
-[john@phrozen.org: added to my upstream queue 30.12.2016]
-lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- init/Kconfig            | 11 +++++++++++
- kernel/kallsyms.c       |  8 ++++++++
- scripts/kallsyms.c      | 12 ++++++++++++
- scripts/link-vmlinux.sh |  4 ++++
- 4 files changed, 35 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1149,6 +1149,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
- 	  the unaligned access emulation.
- 	  see arch/parisc/kernel/unaligned.c for reference
- 
-+config KALLSYMS_UNCOMPRESSED
-+	bool "Keep kallsyms uncompressed"
-+	depends on KALLSYMS
-+	help
-+		Normally kallsyms contains compressed symbols (using a token table),
-+		reducing the uncompressed kernel image size. Keeping the symbol table
-+		uncompressed significantly improves the size of this part in compressed
-+		kernel images.
-+
-+		Say N unless you need compressed kernel images to be small.
-+
- config HAVE_PCSPKR_PLATFORM
- 	bool
- 
---- a/kernel/kallsyms.c
-+++ b/kernel/kallsyms.c
-@@ -74,6 +74,11 @@ static unsigned int kallsyms_expand_symb
- 	 * For every byte on the compressed symbol data, copy the table
- 	 * entry for that byte.
- 	 */
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	memcpy(result, data + 1, len - 1);
-+	result += len - 1;
-+	len = 0;
-+#endif
- 	while (len) {
- 		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
- 		data++;
-@@ -106,6 +111,9 @@ tail:
-  */
- static char kallsyms_get_symbol_type(unsigned int off)
- {
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	return kallsyms_names[off + 1];
-+#endif
- 	/*
- 	 * Get just the first code, look it up in the token table,
- 	 * and return the first char from this token.
---- a/scripts/kallsyms.c
-+++ b/scripts/kallsyms.c
-@@ -61,6 +61,7 @@ static struct addr_range percpu_range =
- static struct sym_entry *table;
- static unsigned int table_size, table_cnt;
- static int all_symbols = 0;
-+static int uncompressed = 0;
- static int absolute_percpu = 0;
- static int base_relative = 0;
- 
-@@ -439,6 +440,9 @@ static void write_src(void)
- 
- 	free(markers);
- 
-+	if (uncompressed)
-+		return;
-+
- 	output_label("kallsyms_token_table");
- 	off = 0;
- 	for (i = 0; i < 256; i++) {
-@@ -497,6 +501,9 @@ static void *find_token(unsigned char *s
- {
- 	int i;
- 
-+	if (uncompressed)
-+		return NULL;
-+
- 	for (i = 0; i < len - 1; i++) {
- 		if (str[i] == token[0] && str[i+1] == token[1])
- 			return &str[i];
-@@ -569,6 +576,9 @@ static void optimize_result(void)
- {
- 	int i, best;
- 
-+	if (uncompressed)
-+		return;
-+
- 	/* using the '\0' symbol last allows compress_symbols to use standard
- 	 * fast string functions */
- 	for (i = 255; i >= 0; i--) {
-@@ -751,6 +761,8 @@ int main(int argc, char **argv)
- 				absolute_percpu = 1;
- 			else if (strcmp(argv[i], "--base-relative") == 0)
- 				base_relative = 1;
-+			else if (strcmp(argv[i], "--uncompressed") == 0)
-+				uncompressed = 1;
- 			else
- 				usage();
- 		}
---- a/scripts/link-vmlinux.sh
-+++ b/scripts/link-vmlinux.sh
-@@ -133,6 +133,10 @@ kallsyms()
- 		kallsymopt="${kallsymopt} --base-relative"
- 	fi
- 
-+	if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
-+		kallsymopt="${kallsymopt} --uncompressed"
-+	fi
-+
- 	local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL}               \
- 		      ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
- 
diff --git a/target/linux/generic/pending-4.19/205-backtrace_module_info.patch b/target/linux/generic/pending-4.19/205-backtrace_module_info.patch
deleted file mode 100644
index 5671173d45..0000000000
--- a/target/linux/generic/pending-4.19/205-backtrace_module_info.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
-
-[john@phrozen.org: felix will add this to his upstream queue]
-
-lede-commit 53827cdc824556cda910b23ce5030c363b8f1461
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- lib/vsprintf.c | 15 +++++++++++----
- 1 file changed, 11 insertions(+), 4 deletions(-)
-
---- a/lib/vsprintf.c
-+++ b/lib/vsprintf.c
-@@ -681,8 +681,10 @@ char *symbol_string(char *buf, char *end
- 		    struct printf_spec spec, const char *fmt)
- {
- 	unsigned long value;
--#ifdef CONFIG_KALLSYMS
- 	char sym[KSYM_SYMBOL_LEN];
-+#ifndef CONFIG_KALLSYMS
-+	struct module *mod;
-+	int len;
- #endif
- 
- 	if (fmt[1] == 'R')
-@@ -696,11 +698,16 @@ char *symbol_string(char *buf, char *end
- 		sprint_symbol(sym, value);
- 	else
- 		sprint_symbol_no_offset(sym, value);
--
--	return string(buf, end, sym, spec);
- #else
--	return special_hex_number(buf, end, value, sizeof(void *));
-+	len = snprintf(sym, sizeof(sym), "0x%lx", value);
-+
-+	mod = __module_address(value);
-+	if (mod)
-+		snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
-+			 mod->name, mod->core_layout.base,
-+			 mod->core_layout.size);
- #endif
-+	return string(buf, end, sym, spec);
- }
- 
- static const struct printf_spec default_str_spec = {
diff --git a/target/linux/generic/pending-4.19/220-optimize_inlining.patch b/target/linux/generic/pending-4.19/220-optimize_inlining.patch
deleted file mode 100644
index 29ec28ab78..0000000000
--- a/target/linux/generic/pending-4.19/220-optimize_inlining.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/x86/Kconfig.debug
-+++ b/arch/x86/Kconfig.debug
-@@ -276,20 +276,6 @@ config CPA_DEBUG
- 	---help---
- 	  Do change_page_attr() self-tests every 30 seconds.
- 
--config OPTIMIZE_INLINING
--	bool "Allow gcc to uninline functions marked 'inline'"
--	---help---
--	  This option determines if the kernel forces gcc to inline the functions
--	  developers have marked 'inline'. Doing so takes away freedom from gcc to
--	  do what it thinks is best, which is desirable for the gcc 3.x series of
--	  compilers. The gcc 4.x series have a rewritten inlining algorithm and
--	  enabling this option will generate a smaller kernel there. Hopefully
--	  this algorithm is so good that allowing gcc 4.x and above to make the
--	  decision will become the default in the future. Until then this option
--	  is there to test gcc for this.
--
--	  If unsure, say N.
--
- config DEBUG_ENTRY
- 	bool "Debug low-level entry code"
- 	depends on DEBUG_KERNEL
---- a/lib/Kconfig.debug
-+++ b/lib/Kconfig.debug
-@@ -150,6 +150,20 @@ endmenu # "printk and dmesg options"
- 
- menu "Compile-time checks and compiler options"
- 
-+config OPTIMIZE_INLINING
-+	bool "Allow gcc to uninline functions marked 'inline'"
-+	---help---
-+	  This option determines if the kernel forces gcc to inline the functions
-+	  developers have marked 'inline'. Doing so takes away freedom from gcc to
-+	  do what it thinks is best, which is desirable for the gcc 3.x series of
-+	  compilers. The gcc 4.x series have a rewritten inlining algorithm and
-+	  enabling this option will generate a smaller kernel there. Hopefully
-+	  this algorithm is so good that allowing gcc 4.x and above to make the
-+	  decision will become the default in the future. Until then this option
-+	  is there to test gcc for this.
-+
-+	  If unsure, say N.
-+
- config DEBUG_INFO
- 	bool "Compile the kernel with debug info"
- 	depends on DEBUG_KERNEL && !COMPILE_TEST
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -306,9 +306,6 @@ config ZONE_DMA32
- config AUDIT_ARCH
- 	def_bool y if X86_64
- 
--config ARCH_SUPPORTS_OPTIMIZED_INLINING
--	def_bool y
--
- config ARCH_SUPPORTS_DEBUG_PAGEALLOC
- 	def_bool y
- 
---- a/include/linux/compiler_types.h
-+++ b/include/linux/compiler_types.h
-@@ -264,8 +264,7 @@ struct ftrace_likely_data {
-  * of extern inline functions at link time.
-  * A lot of inline functions can cause havoc with function tracing.
-  */
--#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
--	!defined(CONFIG_OPTIMIZE_INLINING)
-+#if !defined(CONFIG_OPTIMIZE_INLINING)
- #define inline \
- 	inline __attribute__((always_inline, unused)) notrace __gnu_inline
- #else
diff --git a/target/linux/generic/pending-4.19/240-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-4.19/240-remove-unsane-filenames-from-deps_initramfs-list.patch
deleted file mode 100644
index f440305c9b..0000000000
--- a/target/linux/generic/pending-4.19/240-remove-unsane-filenames-from-deps_initramfs-list.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: usr: sanitize deps_initramfs list
-
-If any filename in the intramfs dependency
-list contains a colon, that causes a kernel
-build error like this:
-
-/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
-make[5]: *** [usr] Error 2
-
-Fix it by removing such filenames from the
-deps_initramfs list.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- usr/Makefile | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/usr/Makefile
-+++ b/usr/Makefile
-@@ -39,20 +39,22 @@ ifneq ($(wildcard $(obj)/$(datafile_d_y)
- 	include $(obj)/$(datafile_d_y)
- endif
- 
-+deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
-+
- quiet_cmd_initfs = GEN     $@
-       cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
- 
- targets := $(datafile_y)
- 
- # do not try to update files included in initramfs
--$(deps_initramfs): ;
-+$(deps_initramfs_sane): ;
- 
--$(deps_initramfs): klibcdirs
-+$(deps_initramfs_sane): klibcdirs
- # We rebuild initramfs_data.cpio if:
- # 1) Any included file is newer then initramfs_data.cpio
- # 2) There are changes in which files are included (added or deleted)
- # 3) If gen_init_cpio are newer than initramfs_data.cpio
- # 4) arguments to gen_initramfs.sh changes
--$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
-+$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs
- 	$(Q)$(initramfs) -l $(ramfs-input) > $(obj)/$(datafile_d_y)
- 	$(call if_changed,initfs)
diff --git a/target/linux/generic/pending-4.19/261-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-4.19/261-enable_wilink_platform_without_drivers.patch
deleted file mode 100644
index 9955ab3c0b..0000000000
--- a/target/linux/generic/pending-4.19/261-enable_wilink_platform_without_drivers.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with
- compat-wireless, too
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- drivers/net/wireless/ti/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ti/Kconfig
-+++ b/drivers/net/wireless/ti/Kconfig
-@@ -19,7 +19,7 @@ source "drivers/net/wireless/ti/wlcore/K
- 
- config WILINK_PLATFORM_DATA
- 	bool "TI WiLink platform data"
--	depends on WLCORE_SDIO || WL1251_SDIO
-+	depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
- 	default y
- 	---help---
- 	Small platform data bit needed to pass data to the sdio modules.
diff --git a/target/linux/generic/pending-4.19/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-4.19/300-mips_expose_boot_raw.patch
deleted file mode 100644
index 5d10cae86c..0000000000
--- a/target/linux/generic/pending-4.19/300-mips_expose_boot_raw.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Mark Miller <mark@mirell.org>
-Subject: mips: expose CONFIG_BOOT_RAW
-
-This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
-certain Broadcom chipsets running CFE in order to load the kernel.
-
-Signed-off-by: Mark Miller <mark@mirell.org>
-Acked-by: Rob Landley <rob@landley.net>
----
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1062,9 +1062,6 @@ config FW_ARC
- config ARCH_MAY_HAVE_PC_FDC
- 	bool
- 
--config BOOT_RAW
--	bool
--
- config CEVT_BCM1480
- 	bool
- 
-@@ -2968,6 +2965,18 @@ choice
- 		bool "Extend builtin kernel arguments with bootloader arguments"
- endchoice
- 
-+config BOOT_RAW
-+	bool "Enable the kernel to be executed from the load address"
-+	default n
-+	help
-+	 Allow the kernel to be executed from the load address for
-+	 bootloaders which cannot read the ELF format. This places
-+	 a jump to start_kernel at the load address.
-+
-+	 If unsure, say N.
-+
-+
-+
- endmenu
- 
- config LOCKDEP_SUPPORT
diff --git a/target/linux/generic/pending-4.19/302-mips_no_branch_likely.patch b/target/linux/generic/pending-4.19/302-mips_no_branch_likely.patch
deleted file mode 100644
index 0e4600237d..0000000000
--- a/target/linux/generic/pending-4.19/302-mips_no_branch_likely.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: use -mno-branch-likely for kernel and userspace
-
-saves ~11k kernel size after lzma and ~12k squashfs size in the
-
-lede-commit: 41a039f46450ffae9483d6216422098669da2900
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -90,7 +90,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- # machines may also.  Since BFD is incredibly buggy with respect to
- # crossformat linking we rely on the elf2ecoff tool for format conversion.
- #
--cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
-+cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
diff --git a/target/linux/generic/pending-4.19/304-mips_disable_fpu.patch b/target/linux/generic/pending-4.19/304-mips_disable_fpu.patch
deleted file mode 100644
index 6e71c68dc5..0000000000
--- a/target/linux/generic/pending-4.19/304-mips_disable_fpu.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From:   Manuel Lauss <manuel.lauss@gmail.com>
-Subject: [RFC PATCH v4 2/2] MIPS: make FPU emulator optional
-
-This small patch makes the MIPS FPU emulator optional. The kernel
-kills float-users on systems without a hardware FPU by sending a SIGILL.
-
-Disabling the emulator shrinks vmlinux by about 54kBytes (32bit,
-optimizing for size).
-
-Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
----
-v4: rediffed because of patch 1/2, should now work with micromips as well
-v3: updated patch description with size savings.
-v2: incorporated changes suggested by Jonas Gorski
-    force the fpu emulator on for micromips: relocating the parts
-    of the mmips code in the emulator to other areas would be a
-    much larger change; I went the cheap route instead with this.
-
- arch/mips/Kbuild                     |  2 +-
- arch/mips/Kconfig                    | 14 ++++++++++++++
- arch/mips/include/asm/fpu.h          |  5 +++--
- arch/mips/include/asm/fpu_emulator.h | 15 +++++++++++++++
- 4 files changed, 33 insertions(+), 3 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2892,6 +2892,20 @@ config MIPS_O32_FP64_SUPPORT
- 
- 	  If unsure, say N.
- 
-+config MIPS_FPU_EMULATOR
-+	bool "MIPS FPU Emulator"
-+	default y
-+	help
-+	  This option lets you disable the built-in MIPS FPU (Coprocessor 1)
-+	  emulator, which handles floating-point instructions on processors
-+	  without a hardware FPU.  It is generally a good idea to keep the
-+	  emulator built-in, unless you are perfectly sure you have a
-+	  complete soft-float environment.  With the emulator disabled, all
-+	  users of float operations will be killed with an illegal instr-
-+	  uction exception.
-+
-+	  Say Y, please.
-+
- config USE_OF
- 	bool
- 	select OF
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -322,7 +322,7 @@ OBJCOPYFLAGS		+= --remove-section=.regin
- head-y := arch/mips/kernel/head.o
- 
- libs-y			+= arch/mips/lib/
--libs-y			+= arch/mips/math-emu/
-+libs-$(CONFIG_MIPS_FPU_EMULATOR)	+= arch/mips/math-emu/
- 
- # See arch/mips/Kbuild for content of core part of the kernel
- core-y += arch/mips/
---- a/arch/mips/include/asm/fpu.h
-+++ b/arch/mips/include/asm/fpu.h
-@@ -230,8 +230,10 @@ static inline int init_fpu(void)
- 		/* Restore FRE */
- 		write_c0_config5(config5);
- 		enable_fpu_hazard();
--	} else
-+	} else if (IS_ENABLED(CONFIG_MIPS_FPU_EMULATOR))
- 		fpu_emulator_init_fpu();
-+	else
-+		ret = SIGILL;
- 
- 	return ret;
- }
---- a/arch/mips/include/asm/fpu_emulator.h
-+++ b/arch/mips/include/asm/fpu_emulator.h
-@@ -30,6 +30,7 @@
- #include <asm/local.h>
- #include <asm/processor.h>
- 
-+#ifdef CONFIG_MIPS_FPU_EMULATOR
- #ifdef CONFIG_DEBUG_FS
- 
- struct mips_fpu_emulator_stats {
-@@ -179,6 +180,16 @@ do {									\
- extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
- 				    struct mips_fpu_struct *ctx, int has_fpu,
- 				    void __user **fault_addr);
-+#else	/* no CONFIG_MIPS_FPU_EMULATOR */
-+static inline int fpu_emulator_cop1Handler(struct pt_regs *xcp,
-+				struct mips_fpu_struct *ctx, int has_fpu,
-+				void __user **fault_addr)
-+{
-+	*fault_addr = NULL;
-+	return SIGILL;	/* we don't speak MIPS FPU */
-+}
-+#endif	/* CONFIG_MIPS_FPU_EMULATOR */
-+
- void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
- 		     struct task_struct *tsk);
- int process_fpemu_return(int sig, void __user *fault_addr,
---- a/arch/mips/include/asm/dsemul.h
-+++ b/arch/mips/include/asm/dsemul.h
-@@ -41,6 +41,7 @@ struct task_struct;
- extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
- 		       unsigned long branch_pc, unsigned long cont_pc);
- 
-+#ifdef CONFIG_MIPS_FPU_EMULATOR
- /**
-  * do_dsemulret() - Return from a delay slot 'emulation' frame
-  * @xcp:	User thread register context.
-@@ -88,5 +89,27 @@ extern bool dsemul_thread_rollback(struc
-  * before @mm is freed in order to avoid memory leaks.
-  */
- extern void dsemul_mm_cleanup(struct mm_struct *mm);
-+#else
-+static inline bool do_dsemulret(struct pt_regs *xcp)
-+{
-+	return false;
-+}
-+
-+static inline bool dsemul_thread_cleanup(struct task_struct *tsk)
-+{
-+	return false;
-+}
-+
-+static inline bool dsemul_thread_rollback(struct pt_regs *regs)
-+{
-+	return false;
-+}
-+
-+static inline void dsemul_mm_cleanup(struct mm_struct *mm)
-+{
-+
-+}
-+
-+#endif
- 
- #endif /* __MIPS_ASM_DSEMUL_H__ */
diff --git a/target/linux/generic/pending-4.19/305-mips_module_reloc.patch b/target/linux/generic/pending-4.19/305-mips_module_reloc.patch
deleted file mode 100644
index 609a96db49..0000000000
--- a/target/linux/generic/pending-4.19/305-mips_module_reloc.patch
+++ /dev/null
@@ -1,371 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to
-
-lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile             |   5 +
- arch/mips/include/asm/module.h |   5 +
- arch/mips/kernel/module.c      | 279 ++++++++++++++++++++++++++++++++++++++++-
- 3 files changed, 284 insertions(+), 5 deletions(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -93,8 +93,18 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
-+ifdef CONFIG_64BIT
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
- KBUILD_CFLAGS_MODULE		+= -mlong-calls
-+else
-+  ifdef CONFIG_DYNAMIC_FTRACE
-+    KBUILD_AFLAGS_MODULE	+= -mlong-calls
-+    KBUILD_CFLAGS_MODULE	+= -mlong-calls
-+  else
-+    KBUILD_AFLAGS_MODULE	+= -mno-long-calls
-+    KBUILD_CFLAGS_MODULE	+= -mno-long-calls
-+  endif
-+endif
- 
- ifeq ($(CONFIG_RELOCATABLE),y)
- LDFLAGS_vmlinux			+= --emit-relocs
---- a/arch/mips/include/asm/module.h
-+++ b/arch/mips/include/asm/module.h
-@@ -12,6 +12,11 @@ struct mod_arch_specific {
- 	const struct exception_table_entry *dbe_start;
- 	const struct exception_table_entry *dbe_end;
- 	struct mips_hi16 *r_mips_hi16_list;
-+
-+	void *phys_plt_tbl;
-+	void *virt_plt_tbl;
-+	unsigned int phys_plt_offset;
-+	unsigned int virt_plt_offset;
- };
- 
- typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
---- a/arch/mips/kernel/module.c
-+++ b/arch/mips/kernel/module.c
-@@ -44,14 +44,221 @@ struct mips_hi16 {
- static LIST_HEAD(dbe_list);
- static DEFINE_SPINLOCK(dbe_lock);
- 
--#ifdef MODULE_START
-+/*
-+ * Get the potential max trampolines size required of the init and
-+ * non-init sections. Only used if we cannot find enough contiguous
-+ * physically mapped memory to put the module into.
-+ */
-+static unsigned int
-+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-+             const char *secstrings, unsigned int symindex, bool is_init)
-+{
-+	unsigned long ret = 0;
-+	unsigned int i, j;
-+	Elf_Sym *syms;
-+
-+	/* Everything marked ALLOC (this includes the exported symbols) */
-+	for (i = 1; i < hdr->e_shnum; ++i) {
-+		unsigned int info = sechdrs[i].sh_info;
-+
-+		if (sechdrs[i].sh_type != SHT_REL
-+		    && sechdrs[i].sh_type != SHT_RELA)
-+			continue;
-+
-+		/* Not a valid relocation section? */
-+		if (info >= hdr->e_shnum)
-+			continue;
-+
-+		/* Don't bother with non-allocated sections */
-+		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-+			continue;
-+
-+		/* If it's called *.init*, and we're not init, we're
-+                   not interested */
-+		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-+		    != is_init)
-+			continue;
-+
-+		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
-+		if (sechdrs[i].sh_type == SHT_REL) {
-+			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rel[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		} else {
-+			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rela[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+#ifndef MODULE_START
-+static void *alloc_phys(unsigned long size)
-+{
-+	unsigned order;
-+	struct page *page;
-+	struct page *p;
-+
-+	size = PAGE_ALIGN(size);
-+	order = get_order(size);
-+
-+	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
-+			__GFP_THISNODE, order);
-+	if (!page)
-+		return NULL;
-+
-+	split_page(page, order);
-+
-+	/* mark all pages except for the last one */
-+	for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
-+		set_bit(PG_owner_priv_1, &p->flags);
-+
-+	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
-+		__free_page(p);
-+
-+	return page_address(page);
-+}
-+#endif
-+
-+static void free_phys(void *ptr)
-+{
-+	struct page *page;
-+	bool free;
-+
-+	page = virt_to_page(ptr);
-+	do {
-+		free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
-+		__free_page(page);
-+		page++;
-+	} while (free);
-+}
-+
-+
- void *module_alloc(unsigned long size)
- {
-+#ifdef MODULE_START
- 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
- 				GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
- 				__builtin_return_address(0));
-+#else
-+	void *ptr;
-+
-+	if (size == 0)
-+		return NULL;
-+
-+	ptr = alloc_phys(size);
-+
-+	/* If we failed to allocate physically contiguous memory,
-+	 * fall back to regular vmalloc. The module loader code will
-+	 * create jump tables to handle long jumps */
-+	if (!ptr)
-+		return vmalloc(size);
-+
-+	return ptr;
-+#endif
- }
-+
-+static inline bool is_phys_addr(void *ptr)
-+{
-+#ifdef CONFIG_64BIT
-+	return (KSEGX((unsigned long)ptr) == CKSEG0);
-+#else
-+	return (KSEGX(ptr) == KSEG0);
- #endif
-+}
-+
-+/* Free memory returned from module_alloc */
-+void module_memfree(void *module_region)
-+{
-+	if (is_phys_addr(module_region))
-+		free_phys(module_region);
-+	else
-+		vfree(module_region);
-+}
-+
-+static void *__module_alloc(int size, bool phys)
-+{
-+	void *ptr;
-+
-+	if (phys)
-+		ptr = kmalloc(size, GFP_KERNEL);
-+	else
-+		ptr = vmalloc(size);
-+	return ptr;
-+}
-+
-+static void __module_free(void *ptr)
-+{
-+	if (is_phys_addr(ptr))
-+		kfree(ptr);
-+	else
-+		vfree(ptr);
-+}
-+
-+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
-+			      char *secstrings, struct module *mod)
-+{
-+	unsigned int symindex = 0;
-+	unsigned int core_size, init_size;
-+	int i;
-+
-+	mod->arch.phys_plt_offset = 0;
-+	mod->arch.virt_plt_offset = 0;
-+	mod->arch.phys_plt_tbl = NULL;
-+	mod->arch.virt_plt_tbl = NULL;
-+
-+	if (IS_ENABLED(CONFIG_64BIT))
-+		return 0;
-+
-+	for (i = 1; i < hdr->e_shnum; i++)
-+		if (sechdrs[i].sh_type == SHT_SYMTAB)
-+			symindex = i;
-+
-+	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
-+	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
-+
-+	if ((core_size + init_size) == 0)
-+		return 0;
-+
-+	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
-+	if (!mod->arch.phys_plt_tbl)
-+		return -ENOMEM;
-+
-+	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
-+	if (!mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
- 
- static int apply_r_mips_none(struct module *me, u32 *location,
- 			     u32 base, Elf_Addr v, bool rela)
-@@ -67,9 +274,40 @@ static int apply_r_mips_32(struct module
- 	return 0;
- }
- 
-+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
-+				 void *start, Elf_Addr v)
-+{
-+	unsigned *tramp = start + *plt_offset;
-+	*plt_offset += 4 * sizeof(int);
-+
-+	/* adjust carry for addiu */
-+	if (v & 0x00008000)
-+		v += 0x10000;
-+
-+	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
-+	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
-+	tramp[2] = 0x03200008;                  /* jr t9 */
-+	tramp[3] = 0x00000000;                  /* nop */
-+
-+	return (Elf_Addr) tramp;
-+}
-+
-+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
-+{
-+	if (is_phys_addr(location))
-+		return add_plt_entry_to(&me->arch.phys_plt_offset,
-+				me->arch.phys_plt_tbl, v);
-+	else
-+		return add_plt_entry_to(&me->arch.virt_plt_offset,
-+				me->arch.virt_plt_tbl, v);
-+
-+}
-+
- static int apply_r_mips_26(struct module *me, u32 *location,
- 			   u32 base, Elf_Addr v, bool rela)
- {
-+	u32 ofs = base & 0x03ffffff;
-+
- 	if (v % 4) {
- 		pr_err("module %s: dangerous R_MIPS_26 relocation\n",
- 		       me->name);
-@@ -77,13 +315,17 @@ static int apply_r_mips_26(struct module
- 	}
- 
- 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
--		pr_err("module %s: relocation overflow\n",
--		       me->name);
--		return -ENOEXEC;
-+		v = add_plt_entry(me, location, v + (ofs << 2));
-+		if (!v) {
-+			pr_err("module %s: relocation overflow\n",
-+			       me->name);
-+			return -ENOEXEC;
-+		}
-+		ofs = 0;
- 	}
- 
- 	*location = (*location & ~0x03ffffff) |
--		    ((base + (v >> 2)) & 0x03ffffff);
-+		    ((ofs + (v >> 2)) & 0x03ffffff);
- 
- 	return 0;
- }
-@@ -459,9 +701,36 @@ int module_finalize(const Elf_Ehdr *hdr,
- 		list_add(&me->arch.dbe_list, &dbe_list);
- 		spin_unlock_irq(&dbe_lock);
- 	}
-+
-+	/* Get rid of the fixup trampoline if we're running the module
-+	 * from physically mapped address space */
-+	if (me->arch.phys_plt_offset == 0) {
-+		__module_free(me->arch.phys_plt_tbl);
-+		me->arch.phys_plt_tbl = NULL;
-+	}
-+	if (me->arch.virt_plt_offset == 0) {
-+		__module_free(me->arch.virt_plt_tbl);
-+		me->arch.virt_plt_tbl = NULL;
-+	}
-+
- 	return 0;
- }
- 
-+void module_arch_freeing_init(struct module *mod)
-+{
-+	if (mod->state == MODULE_STATE_LIVE)
-+		return;
-+
-+	if (mod->arch.phys_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+	}
-+	if (mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.virt_plt_tbl);
-+		mod->arch.virt_plt_tbl = NULL;
-+	}
-+}
-+
- void module_arch_cleanup(struct module *mod)
- {
- 	spin_lock_irq(&dbe_lock);
diff --git a/target/linux/generic/pending-4.19/306-mips_mem_functions_performance.patch b/target/linux/generic/pending-4.19/306-mips_mem_functions_performance.patch
deleted file mode 100644
index e73cfd61b3..0000000000
--- a/target/linux/generic/pending-4.19/306-mips_mem_functions_performance.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] mips: allow the compiler to optimize memset, memcmp, memcpy  for better performance and (in some instances) smaller code
-
-lede-commit: 07e59c7bc7f375f792ec9734be42fe4fa391a8bb
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/boot/compressed/Makefile |  3 ++-
- arch/mips/include/asm/string.h     | 38 ++++++++++++++++++++++++++++++++++++++
- arch/mips/lib/Makefile             |  2 +-
- arch/mips/lib/memcmp.c             | 22 ++++++++++++++++++++++
- 4 files changed, 63 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/lib/memcmp.c
-
---- a/arch/mips/boot/compressed/Makefile
-+++ b/arch/mips/boot/compressed/Makefile
-@@ -23,7 +23,8 @@ KBUILD_CFLAGS := $(filter-out -pg, $(KBU
- KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
- 
- KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ \
--	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
-+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
-+	-D__ZBOOT__
- 
- KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
- 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
---- a/arch/mips/include/asm/string.h
-+++ b/arch/mips/include/asm/string.h
-@@ -140,4 +140,42 @@ extern void *memcpy(void *__to, __const_
- #define __HAVE_ARCH_MEMMOVE
- extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
- 
-+#ifndef __ZBOOT__
-+#define memset(__s, __c, len)					\
-+({								\
-+	size_t __len = (len);					\
-+	void *__ret;						\
-+	if (__builtin_constant_p(len) && __len >= 64)		\
-+		__ret = memset((__s), (__c), __len);		\
-+	else							\
-+		__ret = __builtin_memset((__s), (__c), __len);	\
-+	__ret;							\
-+})
-+
-+#define memcpy(dst, src, len)					\
-+({								\
-+	size_t __len = (len);					\
-+	void *__ret;						\
-+	if (__builtin_constant_p(len) && __len >= 64)		\
-+		__ret = memcpy((dst), (src), __len);		\
-+	else							\
-+		__ret = __builtin_memcpy((dst), (src), __len);	\
-+	__ret;							\
-+})
-+
-+#define memmove(dst, src, len)					\
-+({								\
-+	size_t __len = (len);					\
-+	void *__ret;						\
-+	if (__builtin_constant_p(len) && __len >= 64)		\
-+		__ret = memmove((dst), (src), __len);		\
-+	else							\
-+		__ret = __builtin_memmove((dst), (src), __len);	\
-+	__ret;							\
-+})
-+
-+#define __HAVE_ARCH_MEMCMP
-+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
-+#endif
-+
- #endif /* _ASM_STRING_H */
---- a/arch/mips/lib/Makefile
-+++ b/arch/mips/lib/Makefile
-@@ -5,7 +5,7 @@
- 
- lib-y	+= bitops.o csum_partial.o delay.o memcpy.o memset.o \
- 	   mips-atomic.o strncpy_user.o \
--	   strnlen_user.o uncached.o
-+	   strnlen_user.o uncached.o memcmp.o
- 
- obj-y			+= iomap.o iomap_copy.o
- obj-$(CONFIG_PCI)	+= iomap-pci.o
---- /dev/null
-+++ b/arch/mips/lib/memcmp.c
-@@ -0,0 +1,22 @@
-+/*
-+ *  copied from linux/lib/string.c
-+ *
-+ *  Copyright (C) 1991, 1992  Linus Torvalds
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/string.h>
-+
-+#undef memcmp
-+int memcmp(const void *cs, const void *ct, size_t count)
-+{
-+	const unsigned char *su1, *su2;
-+	int res = 0;
-+
-+	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
-+		if ((res = *su1 - *su2) != 0)
-+			break;
-+	return res;
-+}
-+EXPORT_SYMBOL(memcmp);
-+
diff --git a/target/linux/generic/pending-4.19/307-mips_highmem_offset.patch b/target/linux/generic/pending-4.19/307-mips_highmem_offset.patch
deleted file mode 100644
index 9dd2fa9863..0000000000
--- a/target/linux/generic/pending-4.19/307-mips_highmem_offset.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/include/asm/mach-generic/spaces.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-generic/spaces.h
-+++ b/arch/mips/include/asm/mach-generic/spaces.h
-@@ -50,7 +50,7 @@
-  * Memory above this physical address will be considered highmem.
-  */
- #ifndef HIGHMEM_START
--#define HIGHMEM_START		_AC(0x20000000, UL)
-+#define HIGHMEM_START		_AC(0x10000000, UL)
- #endif
- 
- #endif /* CONFIG_32BIT */
diff --git a/target/linux/generic/pending-4.19/308-mips32r2_tune.patch b/target/linux/generic/pending-4.19/308-mips32r2_tune.patch
deleted file mode 100644
index d9a2a92f5c..0000000000
--- a/target/linux/generic/pending-4.19/308-mips32r2_tune.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
-
-This provides a good tradeoff across at least 24Kc-74Kc, while also
-producing smaller code.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -176,7 +176,7 @@ cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4
- cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
--cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
-+cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -mtune=34kc -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
- cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS64_R2)	+= -march=mips64r2 -Wa,--trap
diff --git a/target/linux/generic/pending-4.19/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch b/target/linux/generic/pending-4.19/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
deleted file mode 100644
index 303654a60a..0000000000
--- a/target/linux/generic/pending-4.19/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From 87ec87c2ad615c1a177cd08ef5fa29fc739f6e50 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 23 Dec 2018 18:06:53 +0100
-Subject: [PATCH] MIPS: Add CPU option reporting to /proc/cpuinfo
-
-Many MIPS CPUs have optional CPU features which are not activates for
-all CPU cores. Print the CPU options which are implemented in the core
-in /proc/cpuinfo. This makes it possible to see what features are
-supported and which are not supported. This should cover all standard
-MIPS extensions, before it only printed information about the main MIPS
-ASEs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/kernel/proc.c | 116 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 116 insertions(+)
-
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -130,6 +130,122 @@ static int show_cpuinfo(struct seq_file
- 		seq_printf(m, "micromips kernel\t: %s\n",
- 		      (read_c0_config3() & MIPS_CONF3_ISA_OE) ?  "yes" : "no");
- 	}
-+
-+	seq_printf(m, "Options implemented\t:");
-+	if (cpu_has_tlb)
-+		seq_printf(m, "%s", " tlb");
-+	if (cpu_has_ftlb)
-+		seq_printf(m, "%s", " ftlb");
-+	if (cpu_has_tlbinv)
-+		seq_printf(m, "%s", " tlbinv");
-+	if (cpu_has_segments)
-+		seq_printf(m, "%s", " segments");
-+	if (cpu_has_rixiex)
-+		seq_printf(m, "%s", " rixiex");
-+	if (cpu_has_ldpte)
-+		seq_printf(m, "%s", " ldpte");
-+	if (cpu_has_maar)
-+		seq_printf(m, "%s", " maar");
-+	if (cpu_has_rw_llb)
-+		seq_printf(m, "%s", " rw_llb");
-+	if (cpu_has_4kex)
-+		seq_printf(m, "%s", " 4kex");
-+	if (cpu_has_3k_cache)
-+		seq_printf(m, "%s", " 3k_cache");
-+	if (cpu_has_4k_cache)
-+		seq_printf(m, "%s", " 4k_cache");
-+	if (cpu_has_6k_cache)
-+		seq_printf(m, "%s", " 6k_cache");
-+	if (cpu_has_8k_cache)
-+		seq_printf(m, "%s", " 8k_cache");
-+	if (cpu_has_tx39_cache)
-+		seq_printf(m, "%s", " tx39_cache");
-+	if (cpu_has_octeon_cache)
-+		seq_printf(m, "%s", " octeon_cache");
-+	if (cpu_has_fpu)
-+		seq_printf(m, "%s", " fpu");
-+	if (cpu_has_32fpr)
-+		seq_printf(m, "%s", " 32fpr");
-+	if (cpu_has_cache_cdex_p)
-+		seq_printf(m, "%s", " cache_cdex_p");
-+	if (cpu_has_cache_cdex_s)
-+		seq_printf(m, "%s", " cache_cdex_s");
-+	if (cpu_has_prefetch)
-+		seq_printf(m, "%s", " prefetch");
-+	if (cpu_has_mcheck)
-+		seq_printf(m, "%s", " mcheck");
-+	if (cpu_has_ejtag)
-+		seq_printf(m, "%s", " ejtag");
-+	if (cpu_has_llsc)
-+		seq_printf(m, "%s", " llsc");
-+	if (cpu_has_bp_ghist)
-+		seq_printf(m, "%s", " bp_ghist");
-+	if (cpu_has_guestctl0ext)
-+		seq_printf(m, "%s", " guestctl0ext");
-+	if (cpu_has_guestctl1)
-+		seq_printf(m, "%s", " guestctl1");
-+	if (cpu_has_guestctl2)
-+		seq_printf(m, "%s", " guestctl2");
-+	if (cpu_has_guestid)
-+		seq_printf(m, "%s", " guestid");
-+	if (cpu_has_drg)
-+		seq_printf(m, "%s", " drg");
-+	if (cpu_has_rixi)
-+		seq_printf(m, "%s", " rixi");
-+	if (cpu_has_lpa)
-+		seq_printf(m, "%s", " lpa");
-+	if (cpu_has_mvh)
-+		seq_printf(m, "%s", " mvh");
-+	if (cpu_has_vtag_icache)
-+		seq_printf(m, "%s", " vtag_icache");
-+	if (cpu_has_dc_aliases)
-+		seq_printf(m, "%s", " dc_aliases");
-+	if (cpu_has_ic_fills_f_dc)
-+		seq_printf(m, "%s", " ic_fills_f_dc");
-+	if (cpu_has_pindexed_dcache)
-+		seq_printf(m, "%s", " pindexed_dcache");
-+	if (cpu_has_userlocal)
-+		seq_printf(m, "%s", " userlocal");
-+	if (cpu_has_nofpuex)
-+		seq_printf(m, "%s", " nofpuex");
-+	if (cpu_has_vint)
-+		seq_printf(m, "%s", " vint");
-+	if (cpu_has_veic)
-+		seq_printf(m, "%s", " veic");
-+	if (cpu_has_inclusive_pcaches)
-+		seq_printf(m, "%s", " inclusive_pcaches");
-+	if (cpu_has_perf_cntr_intr_bit)
-+		seq_printf(m, "%s", " perf_cntr_intr_bit");
-+	if (cpu_has_ufr)
-+		seq_printf(m, "%s", " ufr");
-+	if (cpu_has_fre)
-+		seq_printf(m, "%s", " fre");
-+	if (cpu_has_cdmm)
-+		seq_printf(m, "%s", " cdmm");
-+	if (cpu_has_small_pages)
-+		seq_printf(m, "%s", " small_pages");
-+	if (cpu_has_nan_legacy)
-+		seq_printf(m, "%s", " nan_legacy");
-+	if (cpu_has_nan_2008)
-+		seq_printf(m, "%s", " nan_2008");
-+	if (cpu_has_ebase_wg)
-+		seq_printf(m, "%s", " ebase_wg");
-+	if (cpu_has_badinstr)
-+		seq_printf(m, "%s", " badinstr");
-+	if (cpu_has_badinstrp)
-+		seq_printf(m, "%s", " badinstrp");
-+	if (cpu_has_contextconfig)
-+		seq_printf(m, "%s", " contextconfig");
-+	if (cpu_has_perf)
-+		seq_printf(m, "%s", " perf");
-+	if (cpu_has_shared_ftlb_ram)
-+		seq_printf(m, "%s", " shared_ftlb_ram");
-+	if (cpu_has_shared_ftlb_entries)
-+		seq_printf(m, "%s", " shared_ftlb_entries");
-+	if (cpu_has_mipsmt_pertccounters)
-+		seq_printf(m, "%s", " mipsmt_pertccounters");
-+	seq_printf(m, "\n");
-+
- 	seq_printf(m, "shadow register sets\t: %d\n",
- 		      cpu_data[n].srsets);
- 	seq_printf(m, "kscratch registers\t: %d\n",
diff --git a/target/linux/generic/pending-4.19/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-4.19/310-arm_module_unresolved_weak_sym.patch
deleted file mode 100644
index bc9f0a4c4d..0000000000
--- a/target/linux/generic/pending-4.19/310-arm_module_unresolved_weak_sym.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fix errors in unresolved weak symbols on arm
-
-lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/arm/kernel/module.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/kernel/module.c
-+++ b/arch/arm/kernel/module.c
-@@ -95,6 +95,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
- 			return -ENOEXEC;
- 		}
- 
-+		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
-+		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
-+			continue;
-+
- 		loc = dstsec->sh_addr + rel->r_offset;
- 
- 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/pending-4.19/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-4.19/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
deleted file mode 100644
index 1187543a46..0000000000
--- a/target/linux/generic/pending-4.19/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
+++ /dev/null
@@ -1,272 +0,0 @@
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Subject: MIPS: kexec: Accept command line parameters from userspace.
-
-Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- arch/mips/kernel/machine_kexec.c   |  153 +++++++++++++++++++++++++++++++-----
- arch/mips/kernel/machine_kexec.h   |   20 +++++
- arch/mips/kernel/relocate_kernel.S |   21 +++--
- 3 files changed, 167 insertions(+), 27 deletions(-)
- create mode 100644 arch/mips/kernel/machine_kexec.h
-
---- a/arch/mips/kernel/machine_kexec.c
-+++ b/arch/mips/kernel/machine_kexec.c
-@@ -10,14 +10,11 @@
- #include <linux/mm.h>
- #include <linux/delay.h>
- 
-+#include <asm/bootinfo.h>
- #include <asm/cacheflush.h>
- #include <asm/page.h>
--
--extern const unsigned char relocate_new_kernel[];
--extern const size_t relocate_new_kernel_size;
--
--extern unsigned long kexec_start_address;
--extern unsigned long kexec_indirection_page;
-+#include <linux/uaccess.h>
-+#include "machine_kexec.h"
- 
- int (*_machine_kexec_prepare)(struct kimage *) = NULL;
- void (*_machine_kexec_shutdown)(void) = NULL;
-@@ -28,6 +25,99 @@ atomic_t kexec_ready_to_reboot = ATOMIC_
- void (*_crash_smp_send_stop)(void) = NULL;
- #endif
- 
-+static void machine_kexec_print_args(void)
-+{
-+	unsigned long argc = (int)kexec_args[0];
-+	int i;
-+
-+	pr_info("kexec_args[0] (argc): %lu\n", argc);
-+	pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
-+	pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
-+	pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
-+
-+	for (i = 0; i < argc; i++) {
-+		pr_info("kexec_argv[%d] = %p, %s\n",
-+				i, kexec_argv[i], kexec_argv[i]);
-+	}
-+}
-+
-+static void machine_kexec_init_argv(struct kimage *image)
-+{
-+	void __user *buf = NULL;
-+	size_t bufsz;
-+	size_t size;
-+	int i;
-+
-+	bufsz = 0;
-+	for (i = 0; i < image->nr_segments; i++) {
-+		struct kexec_segment *seg;
-+
-+		seg = &image->segment[i];
-+		if (seg->bufsz < 6)
-+			continue;
-+
-+		if (strncmp((char *) seg->buf, "kexec ", 6))
-+			continue;
-+
-+		buf = seg->buf;
-+		bufsz = seg->bufsz;
-+		break;
-+	}
-+
-+	if (!buf)
-+		return;
-+
-+	size = KEXEC_COMMAND_LINE_SIZE;
-+	size = min(size, bufsz);
-+	if (size < bufsz)
-+		pr_warn("kexec command line truncated to %zd bytes\n", size);
-+
-+	/* Copy to kernel space */
-+	copy_from_user(kexec_argv_buf, buf, size);
-+	kexec_argv_buf[size - 1] = 0;
-+}
-+
-+static void machine_kexec_parse_argv(struct kimage *image)
-+{
-+	char *reboot_code_buffer;
-+	int reloc_delta;
-+	char *ptr;
-+	int argc;
-+	int i;
-+
-+	ptr = kexec_argv_buf;
-+	argc = 0;
-+
-+	/*
-+	 * convert command line string to array of parameters
-+	 * (as bootloader does).
-+	 */
-+	while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
-+		if (*ptr == ' ') {
-+			*ptr++ = '\0';
-+			continue;
-+		}
-+
-+		kexec_argv[argc++] = ptr;
-+		ptr = strchr(ptr, ' ');
-+	}
-+
-+	if (!argc)
-+		return;
-+
-+	kexec_args[0] = argc;
-+	kexec_args[1] = (unsigned long)kexec_argv;
-+	kexec_args[2] = 0;
-+	kexec_args[3] = 0;
-+
-+	reboot_code_buffer = page_address(image->control_code_page);
-+	reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
-+
-+	kexec_args[1] += reloc_delta;
-+	for (i = 0; i < argc; i++)
-+		kexec_argv[i] += reloc_delta;
-+}
-+
- static void kexec_image_info(const struct kimage *kimage)
- {
- 	unsigned long i;
-@@ -52,6 +142,18 @@ int
- machine_kexec_prepare(struct kimage *kimage)
- {
- 	kexec_image_info(kimage);
-+	/*
-+	 * Whenever arguments passed from kexec-tools, Init the arguments as
-+	 * the original ones to try avoiding booting failure.
-+	 */
-+
-+	kexec_args[0] = fw_arg0;
-+	kexec_args[1] = fw_arg1;
-+	kexec_args[2] = fw_arg2;
-+	kexec_args[3] = fw_arg3;
-+
-+	machine_kexec_init_argv(kimage);
-+	machine_kexec_parse_argv(kimage);
- 
- 	if (_machine_kexec_prepare)
- 		return _machine_kexec_prepare(kimage);
-@@ -89,10 +191,12 @@ machine_kexec(struct kimage *image)
- 	unsigned long *ptr;
- 
- 	reboot_code_buffer =
--	  (unsigned long)page_address(image->control_code_page);
-+		(unsigned long)page_address(image->control_code_page);
-+	pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
- 
- 	kexec_start_address =
- 		(unsigned long) phys_to_virt(image->start);
-+	pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
- 
- 	if (image->type == KEXEC_TYPE_DEFAULT) {
- 		kexec_indirection_page =
-@@ -100,9 +204,19 @@ machine_kexec(struct kimage *image)
- 	} else {
- 		kexec_indirection_page = (unsigned long)&image->head;
- 	}
-+	pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
- 
--	memcpy((void*)reboot_code_buffer, relocate_new_kernel,
--	       relocate_new_kernel_size);
-+	pr_info("Where is memcpy: %p\n", memcpy);
-+	pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
-+		(void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
-+	pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
-+		(void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
-+	memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
-+	       KEXEC_RELOCATE_NEW_KERNEL_SIZE);
-+
-+	pr_info("Before _print_args().\n");
-+	machine_kexec_print_args();
-+	pr_info("Before eval loop.\n");
- 
- 	/*
- 	 * The generic kexec code builds a page list with physical
-@@ -124,15 +238,16 @@ machine_kexec(struct kimage *image)
- 	/*
- 	 * we do not want to be bothered.
- 	 */
-+	pr_info("Before irq_disable.\n");
- 	local_irq_disable();
- 
--	printk("Will call new kernel at %08lx\n", image->start);
--	printk("Bye ...\n");
-+	pr_info("Will call new kernel at %08lx\n", image->start);
-+	pr_info("Bye ...\n");
- 	__flush_cache_all();
- #ifdef CONFIG_SMP
- 	/* All secondary cpus now may jump to kexec_wait cycle */
- 	relocated_kexec_smp_wait = reboot_code_buffer +
--		(void *)(kexec_smp_wait - relocate_new_kernel);
-+		(void *)(kexec_smp_wait - kexec_relocate_new_kernel);
- 	smp_wmb();
- 	atomic_set(&kexec_ready_to_reboot, 1);
- #endif
---- /dev/null
-+++ b/arch/mips/kernel/machine_kexec.h
-@@ -0,0 +1,20 @@
-+#ifndef _MACHINE_KEXEC_H
-+#define _MACHINE_KEXEC_H
-+
-+#ifndef __ASSEMBLY__
-+extern const unsigned char kexec_relocate_new_kernel[];
-+extern unsigned long kexec_relocate_new_kernel_end;
-+extern unsigned long kexec_start_address;
-+extern unsigned long kexec_indirection_page;
-+
-+extern char kexec_argv_buf[];
-+extern char *kexec_argv[];
-+
-+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE	((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
-+#endif /* !__ASSEMBLY__ */
-+
-+#define KEXEC_COMMAND_LINE_SIZE		256
-+#define KEXEC_ARGV_SIZE			(KEXEC_COMMAND_LINE_SIZE / 16)
-+#define KEXEC_MAX_ARGC			(KEXEC_ARGV_SIZE / sizeof(long))
-+
-+#endif
---- a/arch/mips/kernel/relocate_kernel.S
-+++ b/arch/mips/kernel/relocate_kernel.S
-@@ -12,8 +12,9 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
- #include <asm/addrspace.h>
-+#include "machine_kexec.h"
- 
--LEAF(relocate_new_kernel)
-+LEAF(kexec_relocate_new_kernel)
- 	PTR_L a0,	arg0
- 	PTR_L a1,	arg1
- 	PTR_L a2,	arg2
-@@ -98,7 +99,7 @@ done:
- #endif
- 	/* jump to kexec_start_address */
- 	j		s1
--	END(relocate_new_kernel)
-+	END(kexec_relocate_new_kernel)
- 
- #ifdef CONFIG_SMP
- /*
-@@ -184,9 +185,15 @@ kexec_indirection_page:
- 	PTR		0
- 	.size		kexec_indirection_page, PTRSIZE
- 
--relocate_new_kernel_end:
-+kexec_argv_buf:
-+	EXPORT(kexec_argv_buf)
-+	.skip		KEXEC_COMMAND_LINE_SIZE
-+	.size		kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
-+
-+kexec_argv:
-+	EXPORT(kexec_argv)
-+	.skip		KEXEC_ARGV_SIZE
-+	.size		kexec_argv, KEXEC_ARGV_SIZE
- 
--relocate_new_kernel_size:
--	EXPORT(relocate_new_kernel_size)
--	PTR		relocate_new_kernel_end - relocate_new_kernel
--	.size		relocate_new_kernel_size, PTRSIZE
-+kexec_relocate_new_kernel_end:
-+	EXPORT(kexec_relocate_new_kernel_end)
diff --git a/target/linux/generic/pending-4.19/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-4.19/332-arc-add-OWRTDTB-section.patch
deleted file mode 100644
index 6fea6f0b66..0000000000
--- a/target/linux/generic/pending-4.19/332-arc-add-OWRTDTB-section.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 34ef04f3845ed2b47d57dd9d3b795b16e1f8185a Mon Sep 17 00:00:00 2001
-From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
-Date: Fri, 15 Mar 2019 18:53:38 +0300
-Subject: [PATCH] arc add OWRTDTB section
-
-This change allows OpenWRT to patch resulting kernel binary with
-external .dtb.
-
-That allows us to re-use exactky the same vmlinux on different boards
-given its ARC core configurations match (at least cache line sizes etc).
-
-""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external
-.dtb right after it, keeping the string in place.
-
-Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
-Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
----
- arch/arc/kernel/head.S        | 10 ++++++++++
- arch/arc/kernel/setup.c       |  4 +++-
- arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
- 3 files changed, 26 insertions(+), 1 deletion(-)
-
---- a/arch/arc/kernel/head.S
-+++ b/arch/arc/kernel/head.S
-@@ -59,6 +59,16 @@
- #endif
- .endm
- 
-+	; Here "patch-dtb" will embed external .dtb
-+	; Note "patch-dtb" searches for ASCII "OWRTDTB:" string
-+	; and pastes .dtb right after it, hense the string precedes
-+	; __image_dtb symbol.
-+	.section .owrt, "aw",@progbits
-+	.ascii  "OWRTDTB:"
-+ENTRY(__image_dtb)
-+	.fill   0x4000
-+END(__image_dtb)
-+
- 	.section .init.text, "ax",@progbits
- 
- ;----------------------------------------------------------------
---- a/arch/arc/kernel/setup.c
-+++ b/arch/arc/kernel/setup.c
-@@ -528,7 +528,7 @@ ignore_uboot_args:
- #endif
- 
- 	if (use_embedded_dtb) {
--		machine_desc = setup_machine_fdt(__dtb_start);
-+		machine_desc = setup_machine_fdt(&__image_dtb);
- 		if (!machine_desc)
- 			panic("Embedded DT invalid\n");
- 	}
-@@ -544,6 +544,8 @@ ignore_uboot_args:
- 	}
- }
- 
-+extern struct boot_param_header __image_dtb;
-+
- void __init setup_arch(char **cmdline_p)
- {
- 	handle_uboot_args();
---- a/arch/arc/kernel/vmlinux.lds.S
-+++ b/arch/arc/kernel/vmlinux.lds.S
-@@ -30,6 +30,19 @@ SECTIONS
- 
- 	. = CONFIG_LINUX_LINK_BASE;
- 
-+	/*
-+	* In OpenWRT we want to patch built binary embedding .dtb of choice.
-+	* This is implemented with "patch-dtb" utility which searches for
-+	* "OWRTDTB:" string in first 16k of image and if it is found
-+	* copies .dtb right after mentioned string.
-+	*
-+	* Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it.
-+	*/
-+ 	.owrt : {
-+		*(.owrt)
-+	. = ALIGN(PAGE_SIZE);
-+	}
-+
- 	_int_vec_base_lds = .;
- 	.vector : {
- 		*(.vector)
diff --git a/target/linux/generic/pending-4.19/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-4.19/333-arc-enable-unaligned-access-in-kernel-mode.patch
deleted file mode 100644
index 4e0265aef5..0000000000
--- a/target/linux/generic/pending-4.19/333-arc-enable-unaligned-access-in-kernel-mode.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Subject: arc: enable unaligned access in kernel mode
-
-This enables misaligned access handling even in kernel mode.
-Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses
-here and there and to cope with that without fixing stuff in the drivers
-we're just gracefully handling it on ARC.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
----
- arch/arc/kernel/unaligned.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arc/kernel/unaligned.c
-+++ b/arch/arc/kernel/unaligned.c
-@@ -206,7 +206,7 @@ int misaligned_fixup(unsigned long addre
- 	char buf[TASK_COMM_LEN];
- 
- 	/* handle user mode only and only if enabled by sysadmin */
--	if (!user_mode(regs) || !unaligned_enabled)
-+	if (!unaligned_enabled)
- 		return 1;
- 
- 	if (no_unaligned_warning) {
diff --git a/target/linux/generic/pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch b/target/linux/generic/pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
deleted file mode 100644
index d28bc7ba99..0000000000
--- a/target/linux/generic/pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 203f17906ff45705fbdaa0430dbbc71142c2640f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 8 Dec 2018 21:45:53 +0100
-Subject: [PATCH 1/3] MIPS: Compile post DMA flush only when needed
-
-dma_sync_phys() is only called for some CPUs when a mapping is removed.
-Add ARCH_HAS_SYNC_DMA_FOR_CPU only for the CPUs listed in
-cpu_needs_post_dma_flush() which need this extra call and do not compile
-this code in for other CPUs. We need this for R10000, R12000, BMIPS5000
-CPUs and CPUs supporting MAAR which was introduced in MIPS32r5.
-
-This will hopefully improve the performance of the not affected devices.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/Kconfig              | 6 +++++-
- arch/mips/mm/dma-noncoherent.c | 2 ++
- 2 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1116,7 +1116,6 @@ config DMA_PERDEV_COHERENT
- config DMA_NONCOHERENT
- 	bool
- 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
--	select ARCH_HAS_SYNC_DMA_FOR_CPU
- 	select NEED_DMA_MAP_STATE
- 	select DMA_NONCOHERENT_MMAP
- 	select DMA_NONCOHERENT_CACHE_SYNC
-@@ -1897,9 +1896,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
- 
- config SYS_HAS_CPU_MIPS32_R5
- 	bool
-+	select ARCH_HAS_SYNC_DMA_FOR_CPU
- 
- config SYS_HAS_CPU_MIPS32_R6
- 	bool
-+	select ARCH_HAS_SYNC_DMA_FOR_CPU
- 
- config SYS_HAS_CPU_MIPS64_R1
- 	bool
-@@ -1909,6 +1910,7 @@ config SYS_HAS_CPU_MIPS64_R2
- 
- config SYS_HAS_CPU_MIPS64_R6
- 	bool
-+	select ARCH_HAS_SYNC_DMA_FOR_CPU
- 
- config SYS_HAS_CPU_R3000
- 	bool
-@@ -1945,6 +1947,7 @@ config SYS_HAS_CPU_R8000
- 
- config SYS_HAS_CPU_R10000
- 	bool
-+	select ARCH_HAS_SYNC_DMA_FOR_CPU
- 
- config SYS_HAS_CPU_RM7000
- 	bool
-@@ -1973,6 +1976,7 @@ config SYS_HAS_CPU_BMIPS4380
- config SYS_HAS_CPU_BMIPS5000
- 	bool
- 	select SYS_HAS_CPU_BMIPS
-+	select ARCH_HAS_SYNC_DMA_FOR_CPU
- 
- config SYS_HAS_CPU_XLR
- 	bool
---- a/arch/mips/mm/dma-noncoherent.c
-+++ b/arch/mips/mm/dma-noncoherent.c
-@@ -191,12 +191,14 @@ void arch_sync_dma_for_device(struct dev
- 		dma_sync_phys(paddr, size, dir);
- }
- 
-+#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU
- void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
- 		size_t size, enum dma_data_direction dir)
- {
- 	if (cpu_needs_post_dma_flush(dev))
- 		dma_sync_phys(paddr, size, dir);
- }
-+#endif
- 
- void arch_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
- 		enum dma_data_direction direction)
diff --git a/target/linux/generic/pending-4.19/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch b/target/linux/generic/pending-4.19/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
deleted file mode 100644
index b353e20bdc..0000000000
--- a/target/linux/generic/pending-4.19/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 66770a004afe10df11d3902e16eaa0c2c39436bb Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 24 May 2019 17:56:19 +0200
-Subject: [PATCH] powerpc: Enable kernel XZ compression option on PPC_85xx
-
-Enable kernel XZ compression option on PPC_85xx. Tested with
-simpleImage on TP-Link TL-WDR4900 (Freescale P1014 processor).
-
-Suggested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
-index a80669209155..f1e9f31ee3b0 100644
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -197,7 +197,7 @@ config PPC
- 	select HAVE_IOREMAP_PROT
- 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
- 	select HAVE_KERNEL_GZIP
--	select HAVE_KERNEL_XZ			if PPC_BOOK3S
-+	select HAVE_KERNEL_XZ			if PPC_BOOK3S || PPC_85xx
- 	select HAVE_KPROBES
- 	select HAVE_KPROBES_ON_FTRACE
- 	select HAVE_KRETPROBES
--- 
-2.20.1
-
diff --git a/target/linux/generic/pending-4.19/400-mtd-add-rootfs-split-support.patch b/target/linux/generic/pending-4.19/400-mtd-add-rootfs-split-support.patch
deleted file mode 100644
index e646224df2..0000000000
--- a/target/linux/generic/pending-4.19/400-mtd-add-rootfs-split-support.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: make rootfs split/detection more generic - patch can be moved to generic-2.6 after testing on other platforms
-
-lede-commit: 328e660b31f0937d52c5ae3d6e7029409918a9df
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/Kconfig            | 17 +++++++++++++++++
- drivers/mtd/mtdpart.c          | 35 +++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 3 files changed, 54 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -11,6 +11,23 @@ menuconfig MTD
- 
- if MTD
- 
-+menu "OpenWrt specific MTD options"
-+
-+config MTD_ROOTFS_ROOT_DEV
-+	bool "Automatically set 'rootfs' partition to be root filesystem"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE
-+	bool "Automatically split firmware partition for kernel+rootfs"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE_NAME
-+	string "Firmware partition name"
-+	depends on MTD_SPLIT_FIRMWARE
-+	default "firmware"
-+
-+endmenu
-+
- config MTD_TESTS
- 	tristate "MTD tests support (DANGEROUS)"
- 	depends on m
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -29,10 +29,12 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
- #include <linux/of.h>
- 
- #include "mtdcore.h"
-+#include "mtdsplit/mtdsplit.h"
- 
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
-@@ -52,6 +54,8 @@ struct mtd_part {
- 	struct list_head list;
- };
- 
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-  * the pointer to that structure.
-@@ -623,6 +627,7 @@ int mtd_add_partition(struct mtd_info *p
- 	mutex_unlock(&mtd_partitions_mutex);
- 
- 	add_mtd_device(&new->mtd);
-+	mtd_partition_split(parent, new);
- 
- 	mtd_add_partition_attrs(new);
- 
-@@ -701,6 +706,29 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
-+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#else
-+#define SPLIT_FIRMWARE_NAME	"unused"
-+#endif
-+
-+static void split_firmware(struct mtd_info *master, struct mtd_part *part)
-+{
-+}
-+
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-+{
-+	static int rootfs_found = 0;
-+
-+	if (rootfs_found)
-+		return;
-+
-+	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
-+	    !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
-+	    !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
-+		split_firmware(master, part);
-+}
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -732,6 +760,7 @@ int add_mtd_partitions(struct mtd_info *
- 		mutex_unlock(&mtd_partitions_mutex);
- 
- 		add_mtd_device(&slave->mtd);
-+		mtd_partition_split(master, slave);
- 		mtd_add_partition_attrs(slave);
- 		/* Look for subpartitions */
- 		parse_mtd_partitions(&slave->mtd, parts[i].types, NULL);
diff --git a/target/linux/generic/pending-4.19/401-mtd-add-support-for-different-partition-parser-types.patch b/target/linux/generic/pending-4.19/401-mtd-add-support-for-different-partition-parser-types.patch
deleted file mode 100644
index 4026a2050b..0000000000
--- a/target/linux/generic/pending-4.19/401-mtd-add-support-for-different-partition-parser-types.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add support for different partition parser types
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          |   56 ++++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |   11 ++++++++
- 2 files changed, 67 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -55,6 +55,10 @@ struct mtd_part {
- };
- 
- static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+					enum mtd_parser_type type,
-+					const struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data);
- 
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-@@ -706,6 +710,36 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
-+static int
-+run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
-+{
-+	struct mtd_partition *parts;
-+	int nr_parts;
-+	int i;
-+
-+	nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, (const struct mtd_partition **)&parts,
-+						NULL);
-+	if (nr_parts <= 0)
-+		return nr_parts;
-+
-+	if (WARN_ON(!parts))
-+		return 0;
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		/* adjust partition offsets */
-+		parts[i].offset += slave->offset;
-+
-+		mtd_add_partition(slave->parent,
-+				  parts[i].name,
-+				  parts[i].offset,
-+				  parts[i].size);
-+	}
-+
-+	kfree(parts);
-+
-+	return nr_parts;
-+}
-+
- #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #else
-@@ -1041,6 +1075,61 @@ void mtd_part_parser_cleanup(struct mtd_
- 	}
- }
- 
-+static struct mtd_part_parser *
-+get_partition_parser_by_type(enum mtd_parser_type type,
-+			     struct mtd_part_parser *start)
-+{
-+	struct mtd_part_parser *p, *ret = NULL;
-+
-+	spin_lock(&part_parser_lock);
-+
-+	p = list_prepare_entry(start, &part_parsers, list);
-+	if (start)
-+		mtd_part_parser_put(start);
-+
-+	list_for_each_entry_continue(p, &part_parsers, list) {
-+		if (p->type == type && try_module_get(p->owner)) {
-+			ret = p;
-+			break;
-+		}
-+	}
-+
-+	spin_unlock(&part_parser_lock);
-+
-+	return ret;
-+}
-+
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+					enum mtd_parser_type type,
-+					const struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data)
-+{
-+	struct mtd_part_parser *prev = NULL;
-+	int ret = 0;
-+
-+	while (1) {
-+		struct mtd_part_parser *parser;
-+
-+		parser = get_partition_parser_by_type(type, prev);
-+		if (!parser)
-+			break;
-+
-+		ret = (*parser->parse_fn)(master, pparts, data);
-+
-+		if (ret > 0) {
-+			mtd_part_parser_put(parser);
-+			printk(KERN_NOTICE
-+			       "%d %s partitions found on MTD device %s\n",
-+			       ret, parser->name, master->name);
-+			break;
-+		}
-+
-+		prev = parser;
-+	}
-+
-+	return ret;
-+}
-+
- int mtd_is_partition(const struct mtd_info *mtd)
- {
- 	struct mtd_part *part;
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -73,6 +73,10 @@ struct mtd_part_parser_data {
-  * Functions dealing with the various ways of partitioning the space
-  */
- 
-+enum mtd_parser_type {
-+	MTD_PARSER_TYPE_DEVICE = 0,
-+};
-+
- struct mtd_part_parser {
- 	struct list_head list;
- 	struct module *owner;
-@@ -81,6 +85,7 @@ struct mtd_part_parser {
- 	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
- 			struct mtd_part_parser_data *);
- 	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
-+	enum mtd_parser_type type;
- };
- 
- /* Container for passing around a set of parsed partitions */
diff --git a/target/linux/generic/pending-4.19/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch b/target/linux/generic/pending-4.19/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
deleted file mode 100644
index 8a90ce6a8b..0000000000
--- a/target/linux/generic/pending-4.19/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.10: allow to use partition parsers for rootfs and firmware split
-
-lede-commit: 3b71cd94bc9517bc25267dccb393b07d4b54564e
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          | 37 +++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 2 files changed, 39 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -748,6 +748,7 @@ run_parsers_by_type(struct mtd_part *sla
- 
- static void split_firmware(struct mtd_info *master, struct mtd_part *part)
- {
-+	run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
- }
- 
- static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-@@ -757,6 +758,12 @@ static void mtd_partition_split(struct m
- 	if (rootfs_found)
- 		return;
- 
-+	if (!strcmp(part->mtd.name, "rootfs")) {
-+		run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+
-+		rootfs_found = 1;
-+	}
-+
- 	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
- 	    !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
- 	    !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -75,6 +75,8 @@ struct mtd_part_parser_data {
- 
- enum mtd_parser_type {
- 	MTD_PARSER_TYPE_DEVICE = 0,
-+	MTD_PARSER_TYPE_ROOTFS,
-+	MTD_PARSER_TYPE_FIRMWARE,
- };
- 
- struct mtd_part_parser {
diff --git a/target/linux/generic/pending-4.19/403-mtd-hook-mtdsplit-to-Kbuild.patch b/target/linux/generic/pending-4.19/403-mtd-hook-mtdsplit-to-Kbuild.patch
deleted file mode 100644
index 60cf043e9b..0000000000
--- a/target/linux/generic/pending-4.19/403-mtd-hook-mtdsplit-to-Kbuild.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: [PATCH] kernel/3.10: move squashfs check from rootfs split code into a separate file
-
-lede-commit: d89bea92b31b4e157a0fa438e75370f089f73427
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/Kconfig  | 2 ++
- drivers/mtd/Makefile | 2 ++
- 2 files changed, 4 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -26,6 +26,8 @@ config MTD_SPLIT_FIRMWARE_NAME
- 	depends on MTD_SPLIT_FIRMWARE
- 	default "firmware"
- 
-+source "drivers/mtd/mtdsplit/Kconfig"
-+
- endmenu
- 
- config MTD_TESTS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -7,6 +7,8 @@
- obj-$(CONFIG_MTD)		+= mtd.o
- mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
- 
-+obj-$(CONFIG_MTD_SPLIT)		+= mtdsplit/
-+
- obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
diff --git a/target/linux/generic/pending-4.19/404-mtd-add-more-helper-functions.patch b/target/linux/generic/pending-4.19/404-mtd-add-more-helper-functions.patch
deleted file mode 100644
index 2e95e99f6d..0000000000
--- a/target/linux/generic/pending-4.19/404-mtd-add-more-helper-functions.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.10: add separate rootfs partition parser
-
-lede-commit: daec7ad7688415156e2730e401503d09bd3acf91
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          | 29 +++++++++++++++++++++++++++++
- include/linux/mtd/mtd.h        | 18 ++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 3 files changed, 49 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -1154,6 +1154,24 @@ int mtd_is_partition(const struct mtd_in
- }
- EXPORT_SYMBOL_GPL(mtd_is_partition);
- 
-+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd)
-+{
-+	if (!mtd_is_partition(mtd))
-+		return (struct mtd_info *)mtd;
-+
-+	return mtd_to_part(mtd)->parent;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_master);
-+
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
-+{
-+	if (!mtd_is_partition(mtd))
-+		return 0;
-+
-+	return mtd_to_part(mtd)->offset;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_offset);
-+
- /* Returns the size of the entire flash chip */
- uint64_t mtd_get_device_size(const struct mtd_info *mtd)
- {
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -507,6 +507,24 @@ static inline void mtd_align_erase_req(s
- 		req->len += mtd->erasesize - mod;
- }
- 
-+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round up to next erase block */
-+	return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
-+}
-+
-+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round down to the start of the current erase block */
-+	return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
-+}
-+
- static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
- {
- 	if (mtd->writesize_shift)
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -116,6 +116,8 @@ int mtd_is_partition(const struct mtd_in
- int mtd_add_partition(struct mtd_info *master, const char *name,
- 		      long long offset, long long length);
- int mtd_del_partition(struct mtd_info *master, int partno);
-+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
- uint64_t mtd_get_device_size(const struct mtd_info *mtd);
- 
- #endif
diff --git a/target/linux/generic/pending-4.19/411-mtd-partial_eraseblock_write.patch b/target/linux/generic/pending-4.19/411-mtd-partial_eraseblock_write.patch
deleted file mode 100644
index bf9822fda8..0000000000
--- a/target/linux/generic/pending-4.19/411-mtd-partial_eraseblock_write.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mtd: implement write support for partitions covering only a part of an eraseblock (buffer data that would otherwise be erased)
-
-lede-commit: 87a8e8ac1067f58ba831c4aae443f3655c31cd80
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/mtdpart.c   | 90 ++++++++++++++++++++++++++++++++++++++++++++-----
- include/linux/mtd/mtd.h |  4 +++
- 2 files changed, 85 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -36,6 +36,8 @@
- #include "mtdcore.h"
- #include "mtdsplit/mtdsplit.h"
- 
-+#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
-+
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
- static DEFINE_MUTEX(mtd_partitions_mutex);
-@@ -220,6 +222,53 @@ static int part_erase(struct mtd_info *m
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
- 	int ret;
-+	size_t wrlen = 0;
-+	u8 *erase_buf = NULL;
-+	u32 erase_buf_ofs = 0;
-+	bool partial_start = false;
-+
-+	if (mtd->flags & MTD_ERASE_PARTIAL) {
-+		size_t readlen = 0;
-+		u64 mtd_ofs;
-+
-+		erase_buf = kmalloc(part->parent->erasesize, GFP_ATOMIC);
-+		if (!erase_buf)
-+			return -ENOMEM;
-+
-+		mtd_ofs = part->offset + instr->addr;
-+		erase_buf_ofs = do_div(mtd_ofs, part->parent->erasesize);
-+
-+		if (erase_buf_ofs > 0) {
-+			instr->addr -= erase_buf_ofs;
-+			ret = mtd_read(part->parent,
-+				instr->addr + part->offset,
-+				part->parent->erasesize,
-+				&readlen, erase_buf);
-+
-+			instr->len += erase_buf_ofs;
-+			partial_start = true;
-+		} else {
-+			mtd_ofs = part->offset + part->mtd.size;
-+			erase_buf_ofs = part->parent->erasesize -
-+				do_div(mtd_ofs, part->parent->erasesize);
-+
-+			if (erase_buf_ofs > 0) {
-+				instr->len += erase_buf_ofs;
-+				ret = mtd_read(part->parent,
-+					part->offset + instr->addr +
-+					instr->len - part->parent->erasesize,
-+					part->parent->erasesize, &readlen,
-+					erase_buf);
-+			} else {
-+				ret = 0;
-+			}
-+		}
-+		if (ret < 0) {
-+			kfree(erase_buf);
-+			return ret;
-+		}
-+
-+	}
- 
- 	instr->addr += part->offset;
- 	ret = part->parent->_erase(part->parent, instr);
-@@ -227,6 +276,24 @@ static int part_erase(struct mtd_info *m
- 		instr->fail_addr -= part->offset;
- 	instr->addr -= part->offset;
- 
-+	if (mtd->flags & MTD_ERASE_PARTIAL) {
-+		if (partial_start) {
-+			part->parent->_write(part->parent,
-+				instr->addr, erase_buf_ofs,
-+				&wrlen, erase_buf);
-+			instr->addr += erase_buf_ofs;
-+		} else {
-+			instr->len -= erase_buf_ofs;
-+			part->parent->_write(part->parent,
-+				instr->addr + instr->len,
-+				erase_buf_ofs, &wrlen,
-+				erase_buf +
-+				part->parent->erasesize -
-+				erase_buf_ofs);
-+		}
-+		kfree(erase_buf);
-+	}
-+
- 	return ret;
- }
- 
-@@ -539,19 +606,22 @@ static struct mtd_part *allocate_partiti
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- 		/* Doesn't start on a boundary of major erase size */
--		/* FIXME: Let it be writable if it is on a boundary of
--		 * _minor_ erase size though */
--		slave->mtd.flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
--			part->name);
-+		slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+		if (((u32)slave->mtd.size) > parent->erasesize)
-+			slave->mtd.flags &= ~MTD_WRITEABLE;
-+		else
-+			slave->mtd.erasesize = slave->mtd.size;
- 	}
- 
--	tmp = part_absolute_offset(parent) + slave->mtd.size;
-+	tmp = part_absolute_offset(parent) + slave->offset + slave->mtd.size;
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
--		slave->mtd.flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
--			part->name);
-+		slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+
-+		if ((u32)slave->mtd.size > parent->erasesize)
-+			slave->mtd.flags &= ~MTD_WRITEABLE;
-+		else
-+			slave->mtd.erasesize = slave->mtd.size;
- 	}
- 
- 	mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
diff --git a/target/linux/generic/pending-4.19/412-mtd-partial_eraseblock_unlock.patch b/target/linux/generic/pending-4.19/412-mtd-partial_eraseblock_unlock.patch
deleted file mode 100644
index a54603a0f8..0000000000
--- a/target/linux/generic/pending-4.19/412-mtd-partial_eraseblock_unlock.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: mtd: allow partial block unlock
-
-This allows sysupgrade for devices such as the Gateworks Avila/Cambria
-product families based on the ixp4xx using the redboot bootloader with
-combined FIS directory and RedBoot config partitions on larger FLASH
-devices with larger eraseblocks.
-
-This second iteration of this patch addresses previous issues:
-- whitespace breakage fixed
-- unlock in all scenarios
-- simplification and fix logic bug
-
-[john@phrozen.org: this should be moved to the ixp4xx folder]
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/mtd/mtdpart.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -306,7 +306,16 @@ static int part_lock(struct mtd_info *mt
- static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->parent->_unlock(part->parent, ofs + part->offset, len);
-+
-+	ofs += part->offset;
-+
-+	if (mtd->flags & MTD_ERASE_PARTIAL) {
-+		/* round up len to next erasesize and round down offset to prev block */
-+		len = (mtd_div_by_eb(len, part->parent) + 1) * part->parent->erasesize;
-+		ofs &= ~(part->parent->erasesize - 1);
-+	}
-+
-+	return part->parent->_unlock(part->parent, ofs, len);
- }
- 
- static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
diff --git a/target/linux/generic/pending-4.19/419-mtd-redboot-add-of_match_table-with-DT-binding.patch b/target/linux/generic/pending-4.19/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
deleted file mode 100644
index fbf9a0553c..0000000000
--- a/target/linux/generic/pending-4.19/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] mtd: redboot: add of_match_table with DT binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows parsing RedBoot compatible partitions for properly described
-flash device in DT.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -289,9 +289,16 @@ static int parse_redboot_partitions(stru
- 	return ret;
- }
- 
-+static const struct of_device_id redboot_parser_of_match_table[] = {
-+	{ .compatible = "ecoscentric,redboot-fis-partitions" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, redboot_parser_of_match_table);
-+
- static struct mtd_part_parser redboot_parser = {
- 	.parse_fn = parse_redboot_partitions,
- 	.name = "RedBoot",
-+	.of_match_table = redboot_parser_of_match_table,
- };
- module_mtd_part_parser(redboot_parser);
- 
diff --git a/target/linux/generic/pending-4.19/420-mtd-redboot_space.patch b/target/linux/generic/pending-4.19/420-mtd-redboot_space.patch
deleted file mode 100644
index 85fbe0512d..0000000000
--- a/target/linux/generic/pending-4.19/420-mtd-redboot_space.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable)
-
-[john@phrozen.org: used by ixp and others]
-
-lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/redboot.c | 19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -265,14 +265,21 @@ static int parse_redboot_partitions(stru
- #endif
- 		names += strlen(names)+1;
- 
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
--			i++;
--			parts[i].offset = parts[i-1].size + parts[i-1].offset;
--			parts[i].size = fl->next->img->flash_base - parts[i].offset;
--			parts[i].name = nullname;
--		}
-+			if (!strcmp(parts[i].name, "rootfs")) {
-+				parts[i].size = fl->next->img->flash_base;
-+				parts[i].size &= ~(master->erasesize - 1);
-+				parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+				nrparts--;
-+			} else {
-+				i++;
-+				parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+				parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+				parts[i].name = nullname;
- #endif
-+			}
-+		}
- 		tmp_fl = fl;
- 		fl = fl->next;
- 		kfree(tmp_fl);
diff --git a/target/linux/generic/pending-4.19/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-4.19/430-mtd-add-myloader-partition-parser.patch
deleted file mode 100644
index bd49893dd8..0000000000
--- a/target/linux/generic/pending-4.19/430-mtd-add-myloader-partition-parser.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: Add myloader partition table parser
-
-[john@phozen.org: shoud be upstreamable]
-
-lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/Kconfig  | 16 ++++++++++++++++
- drivers/mtd/Makefile |  1 +
- 2 files changed, 17 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -177,6 +177,22 @@ menu "Partition parsers"
- source "drivers/mtd/parsers/Kconfig"
- endmenu
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on ADM5120 || ATH25 || ATH79
-+	---help---
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the 
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- 
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y				+= parsers/
- 
- # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/generic/pending-4.19/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-4.19/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
deleted file mode 100644
index d54c284c34..0000000000
--- a/target/linux/generic/pending-4.19/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -29,6 +29,33 @@ struct trx_header {
- 	uint32_t offset[3];
- } __packed;
- 
-+/*
-+ * Calculate real end offset (address) for a given amount of data. It checks
-+ * all blocks skipping bad ones.
-+ */
-+static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes)
-+{
-+	size_t real_offset = 0;
-+
-+	if (mtd_block_isbad(mtd, real_offset))
-+		pr_warn("Base offset shouldn't be at bad block");
-+
-+	while (bytes >= mtd->erasesize) {
-+		bytes -= mtd->erasesize;
-+		real_offset += mtd->erasesize;
-+		while (mtd_block_isbad(mtd, real_offset)) {
-+			real_offset += mtd->erasesize;
-+
-+			if (real_offset >= mtd->size)
-+				return real_offset - mtd->erasesize;
-+		}
-+	}
-+
-+	real_offset += bytes;
-+
-+	return real_offset;
-+}
-+
- static const char *parser_trx_data_part_name(struct mtd_info *master,
- 					     size_t offset)
- {
-@@ -83,21 +110,21 @@ static int parser_trx_parse(struct mtd_i
- 	if (trx.offset[2]) {
- 		part = &parts[curr_part++];
- 		part->name = "loader";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
- 		part->name = "linux";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
--		part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
-+		part->name = parser_trx_data_part_name(mtd, part->offset);
- 		i++;
- 	}
- 
diff --git a/target/linux/generic/pending-4.19/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-4.19/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
deleted file mode 100644
index a6d0828b99..0000000000
--- a/target/linux/generic/pending-4.19/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: mtd: bcm47xxpart: detect T_Meter partition
-
-It can be found on many Netgear devices. It consists of many 0x30 blocks
-starting with 4D 54.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -39,6 +39,7 @@
- #define NVRAM_HEADER			0x48534C46	/* FLSH */
- #define POT_MAGIC1			0x54544f50	/* POTT */
- #define POT_MAGIC2			0x504f		/* OP */
-+#define T_METER_MAGIC			0x4D540000	/* MT */
- #define ML_MAGIC1			0x39685a42
- #define ML_MAGIC2			0x26594131
- #define TRX_MAGIC			0x30524448
-@@ -182,6 +183,15 @@ static int bcm47xxpart_parse(struct mtd_
- 					     MTD_WRITEABLE);
- 			continue;
- 		}
-+
-+		/* T_Meter */
-+		if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
-+			bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
-+					     MTD_WRITEABLE);
-+			continue;
-+		}
- 
- 		/* TRX */
- 		if (buf[0x000 / 4] == TRX_MAGIC) {
diff --git a/target/linux/generic/pending-4.19/440-block2mtd_init.patch b/target/linux/generic/pending-4.19/440-block2mtd_init.patch
deleted file mode 100644
index b8ec11f3dd..0000000000
--- a/target/linux/generic/pending-4.19/440-block2mtd_init.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: block2mtd
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/devices/block2mtd.c | 30 ++++++++++++++++++++----------
- 1 file changed, 20 insertions(+), 10 deletions(-)
-
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -26,6 +26,7 @@
- #include <linux/list.h>
- #include <linux/init.h>
- #include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
- #include <linux/mutex.h>
- #include <linux/mount.h>
- #include <linux/slab.h>
-@@ -214,7 +215,7 @@ static void block2mtd_free_device(struct
- 
- 
- static struct block2mtd_dev *add_device(char *devname, int erase_size,
--		int timeout)
-+		const char *mtdname, int timeout)
- {
- #ifndef MODULE
- 	int i;
-@@ -222,6 +223,7 @@ static struct block2mtd_dev *add_device(
- 	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
- 	struct block_device *bdev;
- 	struct block2mtd_dev *dev;
-+	struct mtd_partition *part;
- 	char *name;
- 
- 	if (!devname)
-@@ -278,13 +280,16 @@ static struct block2mtd_dev *add_device(
- 
- 	/* Setup the MTD structure */
- 	/* make the name contain the block device in */
--	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
-+	if (!mtdname)
-+		mtdname = devname;
-+	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
- 	if (!name)
- 		goto err_destroy_mutex;
- 
-+	strcpy(name, mtdname);
- 	dev->mtd.name = name;
- 
--	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
-+	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
- 	dev->mtd.erasesize = erase_size;
- 	dev->mtd.writesize = 1;
- 	dev->mtd.writebufsize = PAGE_SIZE;
-@@ -297,7 +302,11 @@ static struct block2mtd_dev *add_device(
- 	dev->mtd.priv = dev;
- 	dev->mtd.owner = THIS_MODULE;
- 
--	if (mtd_device_register(&dev->mtd, NULL, 0)) {
-+	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
-+	part->name = name;
-+	part->offset = 0;
-+	part->size = dev->mtd.size;
-+	if (mtd_device_register(&dev->mtd, part, 1)) {
- 		/* Device didn't get added, so free the entry */
- 		goto err_destroy_mutex;
- 	}
-@@ -305,8 +314,7 @@ static struct block2mtd_dev *add_device(
- 	list_add(&dev->list, &blkmtd_device_list);
- 	pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
- 		dev->mtd.index,
--		dev->mtd.name + strlen("block2mtd: "),
--		dev->mtd.erasesize >> 10, dev->mtd.erasesize);
-+		mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
- 	return dev;
- 
- err_destroy_mutex:
-@@ -379,7 +387,7 @@ static int block2mtd_setup2(const char *
- 	/* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
- 	char buf[80 + 12 + 80 + 8];
- 	char *str = buf;
--	char *token[2];
-+	char *token[3];
- 	char *name;
- 	size_t erase_size = PAGE_SIZE;
- 	unsigned long timeout = MTD_DEFAULT_TIMEOUT;
-@@ -393,7 +401,7 @@ static int block2mtd_setup2(const char *
- 	strcpy(str, val);
- 	kill_final_newline(str);
- 
--	for (i = 0; i < 2; i++)
-+	for (i = 0; i < 3; i++)
- 		token[i] = strsep(&str, ",");
- 
- 	if (str) {
-@@ -419,8 +427,10 @@ static int block2mtd_setup2(const char *
- 			return 0;
- 		}
- 	}
-+	if (token[2] && (strlen(token[2]) + 1 > 80))
-+		pr_err("mtd device name too long\n");
- 
--	add_device(name, erase_size, timeout);
-+	add_device(name, erase_size, token[2], timeout);
- 
- 	return 0;
- }
-@@ -454,7 +464,7 @@ static int block2mtd_setup(const char *v
- 
- 
- module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
--MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
-+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
- 
- static int __init block2mtd_init(void)
- {
diff --git a/target/linux/generic/pending-4.19/441-block2mtd_probe.patch b/target/linux/generic/pending-4.19/441-block2mtd_probe.patch
deleted file mode 100644
index 7e974e01ed..0000000000
--- a/target/linux/generic/pending-4.19/441-block2mtd_probe.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: block2mtd
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/devices/block2mtd.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -387,7 +387,7 @@ static int block2mtd_setup2(const char *
- 	/* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
- 	char buf[80 + 12 + 80 + 8];
- 	char *str = buf;
--	char *token[3];
-+	char *token[4];
- 	char *name;
- 	size_t erase_size = PAGE_SIZE;
- 	unsigned long timeout = MTD_DEFAULT_TIMEOUT;
-@@ -401,7 +401,7 @@ static int block2mtd_setup2(const char *
- 	strcpy(str, val);
- 	kill_final_newline(str);
- 
--	for (i = 0; i < 3; i++)
-+	for (i = 0; i < 4; i++)
- 		token[i] = strsep(&str, ",");
- 
- 	if (str) {
-@@ -430,6 +430,9 @@ static int block2mtd_setup2(const char *
- 	if (token[2] && (strlen(token[2]) + 1 > 80))
- 		pr_err("mtd device name too long\n");
- 
-+	if (token[3] && kstrtoul(token[3], 0, &timeout))
-+		pr_err("invalid timeout\n");
-+
- 	add_device(name, erase_size, token[2], timeout);
- 
- 	return 0;
-@@ -464,7 +467,7 @@ static int block2mtd_setup(const char *v
- 
- 
- module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
--MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
-+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>[,<timeout>]]]\"");
- 
- static int __init block2mtd_init(void)
- {
diff --git a/target/linux/generic/pending-4.19/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch b/target/linux/generic/pending-4.19/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
deleted file mode 100644
index ecc3ea1de6..0000000000
--- a/target/linux/generic/pending-4.19/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Feb 2018 11:11:57 +0100
-Subject: [PATCH] mtd: spi-nor: allow NOR driver to write fewer bytes than
- requested
-
-The write size can be constrained by the maximum message/transfer size
-of the SPI controller. Only check for ret = 0 to avoid an infinite loop.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1455,7 +1455,7 @@ static int spi_nor_write(struct mtd_info
- 
- 		write_enable(nor);
- 		ret = nor->write(nor, addr, page_remain, buf + i);
--		if (ret < 0)
-+		if (ret <= 0)
- 			goto write_err;
- 		written = ret;
- 
-@@ -1464,13 +1464,6 @@ static int spi_nor_write(struct mtd_info
- 			goto write_err;
- 		*retlen += written;
- 		i += written;
--		if (written != page_remain) {
--			dev_err(nor->dev,
--				"While writing %zu bytes written %zd bytes\n",
--				page_remain, written);
--			ret = -EIO;
--			goto write_err;
--		}
- 	}
- 
- write_err:
diff --git a/target/linux/generic/pending-4.19/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-4.19/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
deleted file mode 100644
index 88d386302a..0000000000
--- a/target/linux/generic/pending-4.19/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: disable cfi cmdset 0002 erase suspend
-
-on some platforms, erase suspend leads to data corruption and lockups when write
-ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
-rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
-simply disable erase suspend, as it will usually not produce any useful gain on
-the small filesystems used on embedded hardware.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -812,7 +812,7 @@ static int get_chip(struct map_info *map
- 		return 0;
- 
- 	case FL_ERASING:
--		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
-+		if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
- 		    !(mode == FL_READY || mode == FL_POINT ||
- 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
- 			goto sleep;
diff --git a/target/linux/generic/pending-4.19/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-4.19/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
deleted file mode 100644
index f4ba5b72f7..0000000000
--- a/target/linux/generic/pending-4.19/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-From: George Kashperko <george@znau.edu.ua>
-Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data.
-
-Signed-off-by: George Kashperko <george@znau.edu.ua>
----
- drivers/mtd/chips/cfi_cmdset_0002.c |    1 +
- 1 file changed, 1 insertion(+)
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1832,6 +1832,7 @@ static int __xipram do_write_buffer(stru
- 
- 	/* Write Buffer Load */
- 	map_write(map, CMD(0x25), cmd_adr);
-+	(void) map_read(map, cmd_adr);
- 
- 	chip->state = FL_WRITING_TO_BUFFER;
- 
diff --git a/target/linux/generic/pending-4.19/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-4.19/465-m25p80-mx-disable-software-protection.patch
deleted file mode 100644
index fa25c65564..0000000000
--- a/target/linux/generic/pending-4.19/465-m25p80-mx-disable-software-protection.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Disable software protection bits for Macronix flashes.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2733,6 +2733,7 @@ static int spi_nor_init(struct spi_nor *
- 	 */
- 	if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
-+	    JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
- 	    nor->info->flags & SPI_NOR_HAS_LOCK) {
- 		write_enable(nor);
diff --git a/target/linux/generic/pending-4.19/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch b/target/linux/generic/pending-4.19/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
deleted file mode 100644
index dcb86f69bf..0000000000
--- a/target/linux/generic/pending-4.19/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Tue, 9 Jan 2018 20:41:48 +0100
-Subject: [PATCH] Revert "mtd: spi-nor: fix Spansion regressions (aliased with
- Winbond)"
-
-This reverts commit 67b9bcd36906e12a15ffec19463afbbd6a41660e.
-
-The underlying issue breaking Spansion flash has been fixed with "mtd: spi-nor:
-wait until lock/unlock operations are ready" and "mtd: spi-nor: wait for SR_WIP
-to clear on initial unlock", so we can support unlocking for Winbond flash
-again.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2735,6 +2735,7 @@ static int spi_nor_init(struct spi_nor *
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
- 	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
-+	    JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND ||
- 	    nor->info->flags & SPI_NOR_HAS_LOCK) {
- 		write_enable(nor);
- 		write_sr(nor, 0);
-@@ -2871,7 +2872,8 @@ int spi_nor_scan(struct spi_nor *nor, co
- 
- 	/* NOR protection support for STmicro/Micron chips and similar */
- 	if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
--			info->flags & SPI_NOR_HAS_LOCK) {
-+	    JEDEC_MFR(info) == SNOR_MFR_WINBOND ||
-+	    info->flags & SPI_NOR_HAS_LOCK) {
- 		nor->flash_lock = stm_lock;
- 		nor->flash_unlock = stm_unlock;
- 		nor->flash_is_locked = stm_is_locked;
diff --git a/target/linux/generic/pending-4.19/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch b/target/linux/generic/pending-4.19/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
deleted file mode 100644
index a2ab6f3da5..0000000000
--- a/target/linux/generic/pending-4.19/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 4 Nov 2017 07:40:23 +0100
-Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on
- flash size
-
-Some devices need 4K sectors to be able to deal with small flash chips.
-For instance, w25x05 is 64 KiB in size, and without 4K sectors, the
-entire chip is just one erase block.
-On bigger flash chip sizes, using 4K sectors can significantly slow down
-many operations, including using a writable filesystem. There are several
-platforms where it makes sense to use a single kernel on both kinds of
-devices.
-
-To support this properly, allow configuring an upper flash chip size
-limit for 4K sectors support.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -39,6 +39,17 @@ config SPI_ASPEED_SMC
- 	  and support for the SPI flash memory controller (SPI) for
- 	  the host firmware. The implementation only supports SPI NOR.
- 
-+config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT
-+	int "Maximum flash chip size to use 4K sectors on (in KiB)"
-+	depends on MTD_SPI_NOR_USE_4K_SECTORS
-+	default "4096"
-+	help
-+	  There are many flash chips that support 4K sectors, but are so large
-+	  that using them significantly slows down writing large amounts of
-+	  data or using a writable filesystem.
-+	  Any flash chip larger than the size specified in this option will
-+	  not use 4K sectors.
-+
- config SPI_ATMEL_QUADSPI
- 	tristate "Atmel Quad SPI Controller"
- 	depends on ARCH_AT91 || (ARM && COMPILE_TEST && !ARCH_EBSA110)
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2647,10 +2647,12 @@ static int spi_nor_select_erase(struct s
- 
- #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- 	/* prefer "small sector" erase if possible */
--	if (info->flags & SECT_4K) {
-+	if ((info->flags & SECT_4K) && (mtd->size <=
-+	    CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
- 		nor->erase_opcode = SPINOR_OP_BE_4K;
- 		mtd->erasesize = 4096;
--	} else if (info->flags & SECT_4K_PMC) {
-+	} else if ((info->flags & SECT_4K_PMC) && (mtd->size <=
-+		   CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
- 		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
- 		mtd->erasesize = 4096;
- 	} else
diff --git a/target/linux/generic/pending-4.19/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch b/target/linux/generic/pending-4.19/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
deleted file mode 100644
index 8b5dc4eb01..0000000000
--- a/target/linux/generic/pending-4.19/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Robert Marko <robimarko@gmail.com>
-To: linux-mtd@lists.infradead.org
-Subject: mtd: spi-nor: Add Winbond w25q128jv support
-Date: Mon, 25 Jun 2018 13:17:48 +0200
-
-Datasheet:
-http://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf
-
-Testing done on Mikrotik Routerboard  wAP R board.
-It does not support Dual or Quad modes.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
-
-Changes in v2:
-	- Correct the title
----
- drivers/mtd/spi-nor/spi-nor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1239,6 +1239,11 @@ static const struct flash_info spi_nor_i
- 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- 	},
-+	{
-+		"w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
-+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+	},
- 	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
diff --git a/target/linux/generic/pending-4.19/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-4.19/476-mtd-spi-nor-add-eon-en25q128.patch
deleted file mode 100644
index 69ac17ce4c..0000000000
--- a/target/linux/generic/pending-4.19/476-mtd-spi-nor-add-eon-en25q128.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Piotr Dymacz <pepe2k@gmail.com>
-Subject: kernel/mtd: add support for EON EN25Q128
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -994,6 +994,7 @@ static const struct flash_info spi_nor_i
- 	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
- 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
- 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
-+	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
- 	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
- 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
- 	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
diff --git a/target/linux/generic/pending-4.19/477-mtd-add-spi-nor-add-mx25u3235f.patch b/target/linux/generic/pending-4.19/477-mtd-add-spi-nor-add-mx25u3235f.patch
deleted file mode 100644
index 0648b12e12..0000000000
--- a/target/linux/generic/pending-4.19/477-mtd-add-spi-nor-add-mx25u3235f.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: André Valentin <avalentin@marcant.net>
-Subject: linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817
-
-Signed-off-by: André Valentin <avalentin@marcant.net>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1083,6 +1083,7 @@ static const struct flash_info spi_nor_i
- 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
-+	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024, 64, 0) },
- 	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
- 	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
- 	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
diff --git a/target/linux/generic/pending-4.19/479-mtd-spi-nor-add-eon-en25qh64.patch b/target/linux/generic/pending-4.19/479-mtd-spi-nor-add-eon-en25qh64.patch
deleted file mode 100644
index 6bb7754733..0000000000
--- a/target/linux/generic/pending-4.19/479-mtd-spi-nor-add-eon-en25qh64.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -996,6 +996,7 @@ static const struct flash_info spi_nor_i
- 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
- 	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
- 	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
-+	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,   128, 0) },
- 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
- 	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
- 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
diff --git a/target/linux/generic/pending-4.19/480-mtd-set-rootfs-to-be-root-dev.patch b/target/linux/generic/pending-4.19/480-mtd-set-rootfs-to-be-root-dev.patch
deleted file mode 100644
index dce0432fac..0000000000
--- a/target/linux/generic/pending-4.19/480-mtd-set-rootfs-to-be-root-dev.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.1[02]: move MTD root device setup code to mtdcore
-
-The current code only allows to automatically set
-root device on MTD partitions. Move the code to MTD
-core to allow to use it with all MTD devices.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdcore.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -41,6 +41,7 @@
- #include <linux/reboot.h>
- #include <linux/leds.h>
- #include <linux/debugfs.h>
-+#include <linux/root_dev.h>
- 
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -593,6 +594,15 @@ int add_mtd_device(struct mtd_info *mtd)
- 	   of this try_ nonsense, and no bitching about it
- 	   either. :) */
- 	__module_get(THIS_MODULE);
-+
-+	if (!strcmp(mtd->name, "rootfs") &&
-+	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    ROOT_DEV == 0) {
-+		pr_notice("mtd: device %d (%s) set to be root filesystem\n",
-+			  mtd->index, mtd->name);
-+		ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
-+	}
-+
- 	return 0;
- 
- fail_added:
diff --git a/target/linux/generic/pending-4.19/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-4.19/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
deleted file mode 100644
index 79d18d036f..0000000000
--- a/target/linux/generic/pending-4.19/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -1181,6 +1181,73 @@ static struct mtd_info * __init open_mtd
- 	return mtd;
- }
- 
-+/*
-+ * This function tries attaching mtd partitions named either "ubi" or "data"
-+ * during boot.
-+ */
-+static void __init ubi_auto_attach(void)
-+{
-+	int err;
-+	struct mtd_info *mtd;
-+	loff_t offset = 0;
-+	size_t len;
-+	char magic[4];
-+
-+	/* try attaching mtd device named "ubi" or "data" */
-+	mtd = open_mtd_device("ubi");
-+	if (IS_ERR(mtd))
-+		mtd = open_mtd_device("data");
-+
-+	if (IS_ERR(mtd))
-+		return;
-+
-+	/* get the first not bad block */
-+	if (mtd_can_have_bb(mtd))
-+		while (mtd_block_isbad(mtd, offset)) {
-+			offset += mtd->erasesize;
-+
-+			if (offset > mtd->size) {
-+				pr_err("UBI error: Failed to find a non-bad "
-+				       "block on mtd%d\n", mtd->index);
-+				goto cleanup;
-+			}
-+		}
-+
-+	/* check if the read from flash was successful */
-+	err = mtd_read(mtd, offset, 4, &len, (void *) magic);
-+	if ((err && !mtd_is_bitflip(err)) || len != 4) {
-+		pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* check for a valid ubi magic */
-+	if (strncmp(magic, "UBI#", 4)) {
-+		pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* don't auto-add media types where UBI doesn't makes sense */
-+	if (mtd->type != MTD_NANDFLASH &&
-+	    mtd->type != MTD_NORFLASH &&
-+	    mtd->type != MTD_DATAFLASH &&
-+	    mtd->type != MTD_MLCNANDFLASH)
-+		goto cleanup;
-+
-+	mutex_lock(&ubi_devices_mutex);
-+	pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
-+	err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
-+	mutex_unlock(&ubi_devices_mutex);
-+	if (err < 0) {
-+		pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	return;
-+
-+cleanup:
-+	put_mtd_device(mtd);
-+}
-+
- static int __init ubi_init(void)
- {
- 	int err, i, k;
-@@ -1264,6 +1331,12 @@ static int __init ubi_init(void)
- 		}
- 	}
- 
-+	/* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
-+	 * parameter was given */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    !ubi_is_module() && !mtd_devs)
-+		ubi_auto_attach();
-+
- 	err = ubiblock_init();
- 	if (err) {
- 		pr_err("UBI error: block: cannot initialize, error %d\n", err);
diff --git a/target/linux/generic/pending-4.19/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-4.19/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
deleted file mode 100644
index cb2d525610..0000000000
--- a/target/linux/generic/pending-4.19/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-create ubiblock device for rootfs
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -633,6 +633,44 @@ static void __init ubiblock_create_from_
- 	}
- }
- 
-+#define UBIFS_NODE_MAGIC  0x06101831
-+static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
-+{
-+	int ret;
-+	uint32_t magic_of, magic;
-+	ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
-+	if (ret)
-+		return 0;
-+	magic = le32_to_cpu(magic_of);
-+	return magic == UBIFS_NODE_MAGIC;
-+}
-+
-+static void __init ubiblock_create_auto_rootfs(void)
-+{
-+	int ubi_num, ret, is_ubifs;
-+	struct ubi_volume_desc *desc;
-+	struct ubi_volume_info vi;
-+
-+	for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) {
-+		desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY);
-+		if (IS_ERR(desc))
-+			continue;
-+
-+		ubi_get_volume_info(desc, &vi);
-+		is_ubifs = ubi_vol_is_ubifs(desc);
-+		ubi_close_volume(desc);
-+		if (is_ubifs)
-+			break;
-+
-+		ret = ubiblock_create(&vi);
-+		if (ret)
-+			pr_err("UBI error: block: can't add '%s' volume, err=%d\n",
-+				vi.name, ret);
-+		/* always break if we get here */
-+		break;
-+	}
-+}
-+
- static void ubiblock_remove_all(void)
- {
- 	struct ubiblock *next;
-@@ -665,6 +703,10 @@ int __init ubiblock_init(void)
- 	 */
- 	ubiblock_create_from_param();
- 
-+	/* auto-attach "rootfs" volume if existing and non-ubifs */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV))
-+		ubiblock_create_auto_rootfs();
-+
- 	/*
- 	 * Block devices are only created upon user requests, so we ignore
- 	 * existing volumes.
diff --git a/target/linux/generic/pending-4.19/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-4.19/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
deleted file mode 100644
index b76e83e4a3..0000000000
--- a/target/linux/generic/pending-4.19/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- init/do_mounts.c | 26 +++++++++++++++++++++++++-
- 1 file changed, 25 insertions(+), 1 deletion(-)
-
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -427,7 +427,28 @@ retry:
- out:
- 	put_page(page);
- }
-- 
-+
-+static int __init mount_ubi_rootfs(void)
-+{
-+	int flags = MS_SILENT;
-+	int err, tried = 0;
-+
-+	while (tried < 2) {
-+		err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
-+					root_mount_data);
-+		switch (err) {
-+			case -EACCES:
-+				flags |= MS_RDONLY;
-+				tried++;
-+				break;
-+			default:
-+				return err;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+
- #ifdef CONFIG_ROOT_NFS
- 
- #define NFSROOT_TIMEOUT_MIN	5
-@@ -521,6 +542,10 @@ void __init mount_root(void)
- 			change_floppy("root floppy");
- 	}
- #endif
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+	if (!mount_ubi_rootfs())
-+		return;
-+#endif
- #ifdef CONFIG_BLOCK
- 	{
- 		int err = create_dev("/dev/root", ROOT_DEV);
diff --git a/target/linux/generic/pending-4.19/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-4.19/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
deleted file mode 100644
index 1bb53ada7f..0000000000
--- a/target/linux/generic/pending-4.19/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -50,6 +50,7 @@
- #include <linux/scatterlist.h>
- #include <linux/idr.h>
- #include <asm/div64.h>
-+#include <linux/root_dev.h>
- 
- #include "ubi-media.h"
- #include "ubi.h"
-@@ -445,6 +446,15 @@ int ubiblock_create(struct ubi_volume_in
- 	dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
- 		 dev->ubi_num, dev->vol_id, vi->name);
- 	mutex_unlock(&devices_mutex);
-+
-+	if (!strcmp(vi->name, "rootfs") &&
-+	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    ROOT_DEV == 0) {
-+		pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
-+			  dev->ubi_num, dev->vol_id, vi->name);
-+		ROOT_DEV = MKDEV(gd->major, gd->first_minor);
-+	}
-+
- 	return 0;
- 
- out_free_queue:
diff --git a/target/linux/generic/pending-4.19/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-4.19/494-mtd-ubi-add-EOF-marker-support.patch
deleted file mode 100644
index e38f11e592..0000000000
--- a/target/linux/generic/pending-4.19/494-mtd-ubi-add-EOF-marker-support.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add EOF marker support to the UBI layer
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++---
- drivers/mtd/ubi/ubi.h    |  1 +
- 2 files changed, 23 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -939,6 +939,13 @@ static bool vol_ignored(int vol_id)
- #endif
- }
- 
-+static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
-+{
-+	return ech->padding1[0] == 'E' &&
-+	       ech->padding1[1] == 'O' &&
-+	       ech->padding1[2] == 'F';
-+}
-+
- /**
-  * scan_peb - scan and process UBI headers of a PEB.
-  * @ubi: UBI device description object
-@@ -971,9 +978,21 @@ static int scan_peb(struct ubi_device *u
- 		return 0;
- 	}
- 
--	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
--	if (err < 0)
--		return err;
-+	if (!ai->eof_found) {
-+		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-+		if (err < 0)
-+			return err;
-+
-+		if (ec_hdr_has_eof(ech)) {
-+			pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n",
-+				pnum);
-+			ai->eof_found = true;
-+		}
-+	}
-+
-+	if (ai->eof_found)
-+		err = UBI_IO_FF_BITFLIPS;
-+
- 	switch (err) {
- 	case 0:
- 		break;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -789,6 +789,7 @@ struct ubi_attach_info {
- 	int mean_ec;
- 	uint64_t ec_sum;
- 	int ec_count;
-+	bool eof_found;
- 	struct kmem_cache *aeb_slab_cache;
- 	struct ubi_ec_hdr *ech;
- 	struct ubi_vid_io_buf *vidb;
diff --git a/target/linux/generic/pending-4.19/495-mtd-core-add-get_mtd_device_by_node.patch b/target/linux/generic/pending-4.19/495-mtd-core-add-get_mtd_device_by_node.patch
deleted file mode 100644
index 1446ca2abc..0000000000
--- a/target/linux/generic/pending-4.19/495-mtd-core-add-get_mtd_device_by_node.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 1bd1b740f208d1cf4071932cc51860d37266c402 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Sat, 1 Sep 2018 00:30:11 +0200
-Subject: [PATCH 495/497] mtd: core: add get_mtd_device_by_node
-
-Add function to retrieve a mtd device by its OF node. Since drivers can
-assign arbitrary names to mtd devices in the absence of a label
-property, there is no other reliable way to retrieve a mtd device for a
-given OF node.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/mtdcore.c   | 38 ++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/mtd.h |  2 ++
- 2 files changed, 40 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -938,6 +938,44 @@ out_unlock:
- }
- EXPORT_SYMBOL_GPL(get_mtd_device_nm);
- 
-+/**
-+ *	get_mtd_device_by_node - obtain a validated handle for an MTD device
-+ *	by of_node
-+ *	@of_node: OF node of MTD device to open
-+ *
-+ *	This function returns MTD device description structure in case of
-+ *	success and an error code in case of failure.
-+ */
-+struct mtd_info *get_mtd_device_by_node(const struct device_node *of_node)
-+{
-+	int err = -ENODEV;
-+	struct mtd_info *mtd = NULL, *other;
-+
-+	mutex_lock(&mtd_table_mutex);
-+
-+	mtd_for_each_device(other) {
-+		if (of_node == other->dev.of_node) {
-+			mtd = other;
-+			break;
-+		}
-+	}
-+
-+	if (!mtd)
-+		goto out_unlock;
-+
-+	err = __get_mtd_device(mtd);
-+	if (err)
-+		goto out_unlock;
-+
-+	mutex_unlock(&mtd_table_mutex);
-+	return mtd;
-+
-+out_unlock:
-+	mutex_unlock(&mtd_table_mutex);
-+	return ERR_PTR(err);
-+}
-+EXPORT_SYMBOL_GPL(get_mtd_device_by_node);
-+
- void put_mtd_device(struct mtd_info *mtd)
- {
- 	mutex_lock(&mtd_table_mutex);
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -589,6 +589,8 @@ extern struct mtd_info *get_mtd_device(s
- extern int __get_mtd_device(struct mtd_info *mtd);
- extern void __put_mtd_device(struct mtd_info *mtd);
- extern struct mtd_info *get_mtd_device_nm(const char *name);
-+extern struct mtd_info *get_mtd_device_by_node(
-+		const struct device_node *of_node);
- extern void put_mtd_device(struct mtd_info *mtd);
- 
- 
diff --git a/target/linux/generic/pending-4.19/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch b/target/linux/generic/pending-4.19/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
deleted file mode 100644
index 01f3b9ec2d..0000000000
--- a/target/linux/generic/pending-4.19/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 5734c6669fba7ddb5ef491ccff7159d15dba0b59 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Wed, 5 Sep 2018 01:32:51 +0200
-Subject: [PATCH 496/497] dt-bindings: add bindings for mtd-concat devices
-
-Document virtual mtd-concat device bindings.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- .../devicetree/bindings/mtd/mtd-concat.txt    | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/mtd-concat.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/mtd-concat.txt
-@@ -0,0 +1,36 @@
-+Virtual MTD concat device
-+
-+Requires properties:
-+- devices: list of phandles to mtd nodes that should be concatenated
-+
-+Example:
-+
-+&spi {
-+	flash0: flash@0 {
-+		...
-+	};
-+	flash1: flash@1 {
-+		...
-+	};
-+};
-+
-+flash {
-+	compatible = "mtd-concat";
-+
-+	devices = <&flash0 &flash1>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x0000000 0x0040000>;
-+			read-only;
-+		};
-+
-+		partition@40000 {
-+			label = "firmware";
-+			reg = <0x0040000 0x1fc0000>;
-+		};
-+	}
-+}
diff --git a/target/linux/generic/pending-4.19/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch b/target/linux/generic/pending-4.19/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
deleted file mode 100644
index 6584e22882..0000000000
--- a/target/linux/generic/pending-4.19/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
+++ /dev/null
@@ -1,216 +0,0 @@
-From e53f712d8eac71f54399b61038ccf87d2cee99d7 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Sat, 25 Aug 2018 12:35:22 +0200
-Subject: [PATCH 497/497] mtd: mtdconcat: add dt driver for concat devices
-
-Some mtd drivers like physmap variants have support for concatenating
-multiple mtd devices, but there is no generic way to define such a
-concat device from within the device tree.
-
-This is useful for some SoC boards that use multiple flash chips as
-memory banks of a single mtd device, with partitions spanning chip
-borders.
-
-This commit adds a driver for creating virtual mtd-concat devices. They
-must have a compatible = "mtd-concat" line, and define a list of devices
-to concat in the 'devices' property, for example:
-
-flash {
-  compatible = "mtd-concat";
-
-  devices = <&flash0 &flash1>;
-
-  partitions {
-    ...
-  };
-};
-
-The driver is added to the very end of the mtd Makefile to increase the
-likelyhood of all child devices already being loaded at the time of
-probing, preventing unnecessary deferred probes.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- drivers/mtd/Kconfig                 |   2 +
- drivers/mtd/Makefile                |   3 +
- drivers/mtd/composite/Kconfig       |  12 +++
- drivers/mtd/composite/Makefile      |   6 ++
- drivers/mtd/composite/virt_concat.c | 128 ++++++++++++++++++++++++++++
- 5 files changed, 151 insertions(+)
- create mode 100644 drivers/mtd/composite/Kconfig
- create mode 100644 drivers/mtd/composite/Makefile
- create mode 100644 drivers/mtd/composite/virt_concat.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -374,4 +374,6 @@ source "drivers/mtd/spi-nor/Kconfig"
- 
- source "drivers/mtd/ubi/Kconfig"
- 
-+source "drivers/mtd/composite/Kconfig"
-+
- endif # MTD
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -39,3 +39,6 @@ obj-y		+= chips/ lpddr/ maps/ devices/ n
- 
- obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor/
- obj-$(CONFIG_MTD_UBI)		+= ubi/
-+
-+# Composite drivers must be loaded last
-+obj-y		+= composite/
---- /dev/null
-+++ b/drivers/mtd/composite/Kconfig
-@@ -0,0 +1,12 @@
-+menu "Composite MTD device drivers"
-+	depends on MTD!=n
-+
-+config MTD_VIRT_CONCAT
-+	tristate "Virtual concat MTD device"
-+	help
-+	  This driver allows creation of a virtual MTD concat device, which
-+	  concatenates multiple underlying MTD devices to a single device.
-+	  This is required by some SoC boards where multiple memory banks are
-+	  used as one device with partitions spanning across device boundaries.
-+
-+endmenu
---- /dev/null
-+++ b/drivers/mtd/composite/Makefile
-@@ -0,0 +1,6 @@
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# linux/drivers/mtd/composite/Makefile
-+#
-+
-+obj-$(CONFIG_MTD_VIRT_CONCAT)   += virt_concat.o
---- /dev/null
-+++ b/drivers/mtd/composite/virt_concat.c
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Virtual concat MTD device driver
-+ *
-+ * Copyright (C) 2018 Bernhard Frauendienst
-+ * Author: Bernhard Frauendienst, kernel@nospam.obeliks.de
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/mtd/concat.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/slab.h>
-+
-+/*
-+ * struct of_virt_concat - platform device driver data.
-+ * @cmtd the final mtd_concat device
-+ * @num_devices the number of devices in @devices
-+ * @devices points to an array of devices already loaded
-+ */
-+struct of_virt_concat {
-+	struct mtd_info	*cmtd;
-+	int num_devices;
-+	struct mtd_info	**devices;
-+};
-+
-+static int virt_concat_remove(struct platform_device *pdev)
-+{
-+	struct of_virt_concat *info;
-+	int i;
-+
-+	info = platform_get_drvdata(pdev);
-+	if (!info)
-+		return 0;
-+
-+	// unset data for when this is called after a probe error
-+	platform_set_drvdata(pdev, NULL);
-+
-+	if (info->cmtd) {
-+		mtd_device_unregister(info->cmtd);
-+		mtd_concat_destroy(info->cmtd);
-+	}
-+
-+	if (info->devices) {
-+		for (i = 0; i < info->num_devices; i++)
-+			put_mtd_device(info->devices[i]);
-+	}
-+
-+	return 0;
-+}
-+
-+static int virt_concat_probe(struct platform_device *pdev)
-+{
-+	struct device_node *node = pdev->dev.of_node;
-+	struct of_phandle_iterator it;
-+	struct of_virt_concat *info;
-+	struct mtd_info *mtd;
-+	int err = 0, count;
-+
-+	count = of_count_phandle_with_args(node, "devices", NULL);
-+	if (count <= 0)
-+		return -EINVAL;
-+
-+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-+	if (!info)
-+		return -ENOMEM;
-+	info->devices = devm_kcalloc(&pdev->dev, count,
-+				     sizeof(*(info->devices)), GFP_KERNEL);
-+	if (!info->devices) {
-+		err = -ENOMEM;
-+		goto err_remove;
-+	}
-+
-+	platform_set_drvdata(pdev, info);
-+
-+	of_for_each_phandle(&it, err, node, "devices", NULL, 0) {
-+		mtd = get_mtd_device_by_node(it.node);
-+		if (IS_ERR(mtd)) {
-+			of_node_put(it.node);
-+			err = -EPROBE_DEFER;
-+			goto err_remove;
-+		}
-+
-+		info->devices[info->num_devices++] = mtd;
-+	}
-+
-+	info->cmtd = mtd_concat_create(info->devices, info->num_devices,
-+				       dev_name(&pdev->dev));
-+	if (!info->cmtd) {
-+		err = -ENXIO;
-+		goto err_remove;
-+	}
-+
-+	info->cmtd->dev.parent = &pdev->dev;
-+	mtd_set_of_node(info->cmtd, node);
-+	mtd_device_register(info->cmtd, NULL, 0);
-+
-+	return 0;
-+
-+err_remove:
-+	virt_concat_remove(pdev);
-+
-+	return err;
-+}
-+
-+static const struct of_device_id virt_concat_of_match[] = {
-+	{ .compatible = "mtd-concat", },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, virt_concat_of_match);
-+
-+static struct platform_driver virt_concat_driver = {
-+	.probe = virt_concat_probe,
-+	.remove = virt_concat_remove,
-+	.driver	 = {
-+		.name   = "virt-mtdconcat",
-+		.of_match_table = virt_concat_of_match,
-+	},
-+};
-+
-+module_platform_driver(virt_concat_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Bernhard Frauendienst <kernel@nospam.obeliks.de>");
-+MODULE_DESCRIPTION("Virtual concat MTD device driver");
diff --git a/target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch
deleted file mode 100644
index f28186a40c..0000000000
--- a/target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch
+++ /dev/null
@@ -1,5180 +0,0 @@
-From: Alexandros C. Couloumbis <alex@ozo.com>
-Subject: fs: add jffs2/lzma support (not activated by default yet)
-
-lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- fs/jffs2/Kconfig             |    9 +
- fs/jffs2/Makefile            |    3 +
- fs/jffs2/compr.c             |    6 +
- fs/jffs2/compr.h             |   10 +-
- fs/jffs2/compr_lzma.c        |  128 +++
- fs/jffs2/super.c             |   33 +-
- include/linux/lzma.h         |   62 ++
- include/linux/lzma/LzFind.h  |  115 +++
- include/linux/lzma/LzHash.h  |   54 +
- include/linux/lzma/LzmaDec.h |  231 +++++
- include/linux/lzma/LzmaEnc.h |   80 ++
- include/linux/lzma/Types.h   |  226 +++++
- include/uapi/linux/jffs2.h   |    1 +
- lib/Kconfig                  |    6 +
- lib/Makefile                 |   12 +
- lib/lzma/LzFind.c            |  761 ++++++++++++++
- lib/lzma/LzmaDec.c           |  999 +++++++++++++++++++
- lib/lzma/LzmaEnc.c           | 2271 ++++++++++++++++++++++++++++++++++++++++++
- lib/lzma/Makefile            |    7 +
- 19 files changed, 5008 insertions(+), 6 deletions(-)
- create mode 100644 fs/jffs2/compr_lzma.c
- create mode 100644 include/linux/lzma.h
- create mode 100644 include/linux/lzma/LzFind.h
- create mode 100644 include/linux/lzma/LzHash.h
- create mode 100644 include/linux/lzma/LzmaDec.h
- create mode 100644 include/linux/lzma/LzmaEnc.h
- create mode 100644 include/linux/lzma/Types.h
- create mode 100644 lib/lzma/LzFind.c
- create mode 100644 lib/lzma/LzmaDec.c
- create mode 100644 lib/lzma/LzmaEnc.c
- create mode 100644 lib/lzma/Makefile
-
---- a/fs/jffs2/Kconfig
-+++ b/fs/jffs2/Kconfig
-@@ -135,6 +135,15 @@ config JFFS2_LZO
- 	  This feature was added in July, 2007. Say 'N' if you need
- 	  compatibility with older bootloaders or kernels.
- 
-+config JFFS2_LZMA
-+	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
-+	select LZMA_COMPRESS
-+	select LZMA_DECOMPRESS
-+	depends on JFFS2_FS
-+	default n
-+	help
-+	  JFFS2 wrapper to the LZMA C SDK
-+
- config JFFS2_RTIME
- 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- 	depends on JFFS2_FS
---- a/fs/jffs2/Makefile
-+++ b/fs/jffs2/Makefile
-@@ -19,4 +19,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
- jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
- jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
- jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
-+jffs2-$(CONFIG_JFFS2_LZMA)      += compr_lzma.o
- jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
-+
-+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
-@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_init();
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+        jffs2_lzma_init();
-+#endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
- 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
-+#ifdef CONFIG_JFFS2_LZMA
-+        jffs2_lzma_exit();
-+#endif
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_exit();
- #endif
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
-@@ -29,9 +29,9 @@
- #define JFFS2_DYNRUBIN_PRIORITY  20
- #define JFFS2_LZARI_PRIORITY     30
- #define JFFS2_RTIME_PRIORITY     50
--#define JFFS2_ZLIB_PRIORITY      60
--#define JFFS2_LZO_PRIORITY       80
--
-+#define JFFS2_LZMA_PRIORITY      70
-+#define JFFS2_ZLIB_PRIORITY      80
-+#define JFFS2_LZO_PRIORITY       90
- 
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
- #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
-@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
- int jffs2_lzo_init(void);
- void jffs2_lzo_exit(void);
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+int jffs2_lzma_init(void);
-+void jffs2_lzma_exit(void);
-+#endif
- 
- #endif /* __JFFS2_COMPR_H__ */
---- /dev/null
-+++ b/fs/jffs2/compr_lzma.c
-@@ -0,0 +1,128 @@
-+/*
-+ * JFFS2 -- Journalling Flash File System, Version 2.
-+ *
-+ * For licensing information, see the file 'LICENCE' in this directory.
-+ *
-+ * JFFS2 wrapper to the LZMA C SDK
-+ *
-+ */
-+
-+#include <linux/lzma.h>
-+#include "compr.h"
-+
-+#ifdef __KERNEL__
-+	static DEFINE_MUTEX(deflate_mutex);
-+#endif
-+
-+CLzmaEncHandle *p;
-+Byte propsEncoded[LZMA_PROPS_SIZE];
-+SizeT propsSize = sizeof(propsEncoded);
-+
-+STATIC void lzma_free_workspace(void)
-+{
-+	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
-+}
-+
-+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
-+{
-+	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
-+	{
-+		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
-+		return -ENOMEM;
-+	}
-+
-+	if (LzmaEnc_SetProps(p, props) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+	
-+	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+        return 0;
-+}
-+
-+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
-+			      uint32_t *sourcelen, uint32_t *dstlen)
-+{
-+	SizeT compress_size = (SizeT)(*dstlen);
-+	int ret;
-+
-+	#ifdef __KERNEL__
-+		mutex_lock(&deflate_mutex);
-+	#endif
-+
-+	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
-+		0, NULL, &lzma_alloc, &lzma_alloc);
-+
-+	#ifdef __KERNEL__
-+		mutex_unlock(&deflate_mutex);
-+	#endif
-+
-+	if (ret != SZ_OK)
-+		return -1;
-+
-+	*dstlen = (uint32_t)compress_size;
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+				 uint32_t srclen, uint32_t destlen)
-+{
-+	int ret;
-+	SizeT dl = (SizeT)destlen;
-+	SizeT sl = (SizeT)srclen;
-+	ELzmaStatus status;
-+	
-+	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
-+		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
-+
-+	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static struct jffs2_compressor jffs2_lzma_comp = {
-+	.priority = JFFS2_LZMA_PRIORITY,
-+	.name = "lzma",
-+	.compr = JFFS2_COMPR_LZMA,
-+	.compress = &jffs2_lzma_compress,
-+	.decompress = &jffs2_lzma_decompress,
-+	.disabled = 0,
-+};
-+
-+int INIT jffs2_lzma_init(void)
-+{
-+        int ret;
-+	CLzmaEncProps props;
-+	LzmaEncProps_Init(&props);
-+
-+        props.dictSize = LZMA_BEST_DICT(0x2000);
-+        props.level = LZMA_BEST_LEVEL;
-+        props.lc = LZMA_BEST_LC;
-+        props.lp = LZMA_BEST_LP;
-+        props.pb = LZMA_BEST_PB;
-+        props.fb = LZMA_BEST_FB;
-+
-+	ret = lzma_alloc_workspace(&props);
-+        if (ret < 0)
-+                return ret;
-+
-+	ret = jffs2_register_compressor(&jffs2_lzma_comp);
-+	if (ret)
-+		lzma_free_workspace();
-+	
-+        return ret;
-+}
-+
-+void jffs2_lzma_exit(void)
-+{
-+	jffs2_unregister_compressor(&jffs2_lzma_comp);
-+	lzma_free_workspace();
-+}
---- a/fs/jffs2/super.c
-+++ b/fs/jffs2/super.c
-@@ -374,14 +374,41 @@ static int __init init_jffs2_fs(void)
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
- 
--	pr_info("version 2.2."
-+	pr_info("version 2.2"
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- 	       " (NAND)"
- #endif
- #ifdef CONFIG_JFFS2_SUMMARY
--	       " (SUMMARY) "
-+	       " (SUMMARY)"
- #endif
--	       " © 2001-2006 Red Hat, Inc.\n");
-+#ifdef CONFIG_JFFS2_ZLIB
-+	       " (ZLIB)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZO
-+	       " (LZO)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	       " (LZMA)"
-+#endif
-+#ifdef CONFIG_JFFS2_RTIME
-+	       " (RTIME)"
-+#endif
-+#ifdef CONFIG_JFFS2_RUBIN
-+	       " (RUBIN)"
-+#endif
-+#ifdef  CONFIG_JFFS2_CMODE_NONE
-+	       " (CMODE_NONE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_PRIORITY
-+	       " (CMODE_PRIORITY)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_SIZE
-+	       " (CMODE_SIZE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
-+	       " (CMODE_FAVOURLZO)"
-+#endif
-+	       " (c) 2001-2006 Red Hat, Inc.\n");
- 
- 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
- 					     sizeof(struct jffs2_inode_info),
---- /dev/null
-+++ b/include/linux/lzma.h
-@@ -0,0 +1,62 @@
-+#ifndef __LZMA_H__
-+#define __LZMA_H__
-+
-+#ifdef __KERNEL__
-+	#include <linux/kernel.h>
-+	#include <linux/sched.h>
-+	#include <linux/slab.h>
-+	#include <linux/vmalloc.h>
-+	#include <linux/init.h>
-+	#define LZMA_MALLOC vmalloc
-+	#define LZMA_FREE vfree
-+	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
-+	#define INIT __init
-+	#define STATIC static
-+#else
-+	#include <stdint.h>
-+	#include <stdlib.h>
-+	#include <stdio.h>
-+	#include <unistd.h>
-+	#include <string.h>
-+	#include <asm/types.h>
-+	#include <errno.h>
-+	#include <linux/jffs2.h>
-+	#ifndef PAGE_SIZE
-+		extern int page_size;
-+		#define PAGE_SIZE page_size
-+	#endif
-+	#define LZMA_MALLOC malloc
-+	#define LZMA_FREE free
-+	#define PRINT_ERROR(msg) fprintf(stderr, msg)
-+	#define INIT
-+	#define STATIC
-+#endif
-+
-+#include "lzma/LzmaDec.h"
-+#include "lzma/LzmaEnc.h"
-+
-+#define LZMA_BEST_LEVEL (9)
-+#define LZMA_BEST_LC    (0)
-+#define LZMA_BEST_LP    (0)
-+#define LZMA_BEST_PB    (0)
-+#define LZMA_BEST_FB  (273)
-+
-+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
-+
-+static void *p_lzma_malloc(void *p, size_t size)
-+{
-+        if (size == 0)
-+                return NULL;
-+
-+        return LZMA_MALLOC(size);
-+}
-+
-+static void p_lzma_free(void *p, void *address)
-+{
-+        if (address != NULL)
-+                LZMA_FREE(address);
-+}
-+
-+static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzFind.h
-@@ -0,0 +1,115 @@
-+/* LzFind.h -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_FIND_H
-+#define __LZ_FIND_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+typedef UInt32 CLzRef;
-+
-+typedef struct _CMatchFinder
-+{
-+  Byte *buffer;
-+  UInt32 pos;
-+  UInt32 posLimit;
-+  UInt32 streamPos;
-+  UInt32 lenLimit;
-+
-+  UInt32 cyclicBufferPos;
-+  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
-+
-+  UInt32 matchMaxLen;
-+  CLzRef *hash;
-+  CLzRef *son;
-+  UInt32 hashMask;
-+  UInt32 cutValue;
-+
-+  Byte *bufferBase;
-+  ISeqInStream *stream;
-+  int streamEndWasReached;
-+
-+  UInt32 blockSize;
-+  UInt32 keepSizeBefore;
-+  UInt32 keepSizeAfter;
-+
-+  UInt32 numHashBytes;
-+  int directInput;
-+  size_t directInputRem;
-+  int btMode;
-+  int bigHash;
-+  UInt32 historySize;
-+  UInt32 fixedHashSize;
-+  UInt32 hashSizeSum;
-+  UInt32 numSons;
-+  SRes result;
-+  UInt32 crc[256];
-+} CMatchFinder;
-+
-+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
-+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
-+
-+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-+
-+int MatchFinder_NeedMove(CMatchFinder *p);
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
-+void MatchFinder_MoveBlock(CMatchFinder *p);
-+void MatchFinder_ReadIfRequired(CMatchFinder *p);
-+
-+void MatchFinder_Construct(CMatchFinder *p);
-+
-+/* Conditions:
-+     historySize <= 3 GB
-+     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
-+*/
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc);
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-+    UInt32 *distances, UInt32 maxLen);
-+
-+/*
-+Conditions:
-+  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
-+  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
-+*/
-+
-+typedef void (*Mf_Init_Func)(void *object);
-+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
-+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
-+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
-+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
-+typedef void (*Mf_Skip_Func)(void *object, UInt32);
-+
-+typedef struct _IMatchFinder
-+{
-+  Mf_Init_Func Init;
-+  Mf_GetIndexByte_Func GetIndexByte;
-+  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
-+  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
-+  Mf_GetMatches_Func GetMatches;
-+  Mf_Skip_Func Skip;
-+} IMatchFinder;
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-+
-+void MatchFinder_Init(CMatchFinder *p);
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzHash.h
-@@ -0,0 +1,54 @@
-+/* LzHash.h -- HASH functions for LZ algorithms
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_HASH_H
-+#define __LZ_HASH_H
-+
-+#define kHash2Size (1 << 10)
-+#define kHash3Size (1 << 16)
-+#define kHash4Size (1 << 20)
-+
-+#define kFix3HashSize (kHash2Size)
-+#define kFix4HashSize (kHash2Size + kHash3Size)
-+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
-+
-+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
-+
-+#define HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
-+
-+#define HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
-+
-+#define HASH5_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
-+  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
-+  hash4Value &= (kHash4Size - 1); }
-+
-+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
-+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
-+
-+
-+#define MT_HASH2_CALC \
-+  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
-+
-+#define MT_HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
-+
-+#define MT_HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -0,0 +1,231 @@
-+/* LzmaDec.h -- LZMA Decoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_DEC_H
-+#define __LZMA_DEC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* #define _LZMA_PROB32 */
-+/* _LZMA_PROB32 can increase the speed on some CPUs,
-+   but memory usage for CLzmaDec::probs will be doubled in that case */
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+
-+/* ---------- LZMA Properties ---------- */
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaProps
-+{
-+  unsigned lc, lp, pb;
-+  UInt32 dicSize;
-+} CLzmaProps;
-+
-+/* LzmaProps_Decode - decodes properties
-+Returns:
-+  SZ_OK
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-+
-+
-+/* ---------- LZMA Decoder state ---------- */
-+
-+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-+   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-+
-+#define LZMA_REQUIRED_INPUT_MAX 20
-+
-+typedef struct
-+{
-+  CLzmaProps prop;
-+  CLzmaProb *probs;
-+  Byte *dic;
-+  const Byte *buf;
-+  UInt32 range, code;
-+  SizeT dicPos;
-+  SizeT dicBufSize;
-+  UInt32 processedPos;
-+  UInt32 checkDicSize;
-+  unsigned state;
-+  UInt32 reps[4];
-+  unsigned remainLen;
-+  int needFlush;
-+  int needInitState;
-+  UInt32 numProbs;
-+  unsigned tempBufSize;
-+  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-+} CLzmaDec;
-+
-+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-+
-+void LzmaDec_Init(CLzmaDec *p);
-+
-+/* There are two types of LZMA streams:
-+     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-+     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-+
-+typedef enum
-+{
-+  LZMA_FINISH_ANY,   /* finish at any point */
-+  LZMA_FINISH_END    /* block must be finished at the end */
-+} ELzmaFinishMode;
-+
-+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-+
-+   You must use LZMA_FINISH_END, when you know that current output buffer
-+   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-+
-+   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-+   and output value of destLen will be less than output buffer size limit.
-+   You can check status result also.
-+
-+   You can use multiple checks to test data integrity after full decompression:
-+     1) Check Result and "status" variable.
-+     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-+     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-+        You must use correct finish mode in that case. */
-+
-+typedef enum
-+{
-+  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
-+  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
-+  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
-+  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
-+  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
-+} ELzmaStatus;
-+
-+/* ELzmaStatus is used only as output value for function call */
-+
-+
-+/* ---------- Interfaces ---------- */
-+
-+/* There are 3 levels of interfaces:
-+     1) Dictionary Interface
-+     2) Buffer Interface
-+     3) One Call Interface
-+   You can select any of these interfaces, but don't mix functions from different
-+   groups for same object. */
-+
-+
-+/* There are two variants to allocate state for Dictionary Interface:
-+     1) LzmaDec_Allocate / LzmaDec_Free
-+     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-+   You can use variant 2, if you set dictionary buffer manually.
-+   For Buffer Interface you must always use variant 1.
-+
-+LzmaDec_Allocate* can return:
-+  SZ_OK
-+  SZ_ERROR_MEM         - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+   
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
-+
-+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-+
-+/* ---------- Dictionary Interface ---------- */
-+
-+/* You can use it, if you want to eliminate the overhead for data copying from
-+   dictionary to some other external buffer.
-+   You must work with CLzmaDec variables directly in this interface.
-+
-+   STEPS:
-+     LzmaDec_Constr()
-+     LzmaDec_Allocate()
-+     for (each new stream)
-+     {
-+       LzmaDec_Init()
-+       while (it needs more decompression)
-+       {
-+         LzmaDec_DecodeToDic()
-+         use data from CLzmaDec::dic and update CLzmaDec::dicPos
-+       }
-+     }
-+     LzmaDec_Free()
-+*/
-+
-+/* LzmaDec_DecodeToDic
-+   
-+   The decoding to internal dictionary buffer (CLzmaDec::dic).
-+   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (dicLimit).
-+  LZMA_FINISH_ANY - Decode just dicLimit bytes.
-+  LZMA_FINISH_END - Stream must be finished after dicLimit.
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_NEEDS_MORE_INPUT
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+*/
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- Buffer Interface ---------- */
-+
-+/* It's zlib-like interface.
-+   See LzmaDec_DecodeToDic description for information about STEPS and return results,
-+   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-+   to work with CLzmaDec variables manually.
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+*/
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaDecode
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+  SZ_ERROR_MEM  - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-+*/
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -0,0 +1,80 @@
-+/*  LzmaEnc.h -- LZMA Encoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_ENC_H
-+#define __LZMA_ENC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaEncProps
-+{
-+  int level;       /*  0 <= level <= 9 */
-+  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
-+                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
-+                       default = (1 << 24) */
-+  int lc;          /* 0 <= lc <= 8, default = 3 */
-+  int lp;          /* 0 <= lp <= 4, default = 0 */
-+  int pb;          /* 0 <= pb <= 4, default = 2 */
-+  int algo;        /* 0 - fast, 1 - normal, default = 1 */
-+  int fb;          /* 5 <= fb <= 273, default = 32 */
-+  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
-+  int numHashBytes; /* 2, 3 or 4, default = 4 */
-+  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
-+  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
-+  int numThreads;  /* 1 or 2, default = 2 */
-+} CLzmaEncProps;
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p);
-+void LzmaEncProps_Normalize(CLzmaEncProps *p);
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
-+
-+
-+/* ---------- CLzmaEncHandle Interface ---------- */
-+
-+/* LzmaEnc_* functions can return the following exit codes:
-+Returns:
-+  SZ_OK           - OK
-+  SZ_ERROR_MEM    - Memory allocation error
-+  SZ_ERROR_PARAM  - Incorrect paramater in props
-+  SZ_ERROR_WRITE  - Write callback error.
-+  SZ_ERROR_PROGRESS - some break from progress callback
-+  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+typedef void * CLzmaEncHandle;
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaEncode
-+Return code:
-+  SZ_OK               - OK
-+  SZ_ERROR_MEM        - Memory allocation error
-+  SZ_ERROR_PARAM      - Incorrect paramater
-+  SZ_ERROR_OUTPUT_EOF - output buffer overflow
-+  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
-+*/
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/Types.h
-@@ -0,0 +1,226 @@
-+/* Types.h -- Basic types
-+2009-11-23 : Igor Pavlov : Public domain */
-+
-+#ifndef __7Z_TYPES_H
-+#define __7Z_TYPES_H
-+
-+#include <stddef.h>
-+
-+#ifdef _WIN32
-+#include <windows.h>
-+#endif
-+
-+#ifndef EXTERN_C_BEGIN
-+#ifdef __cplusplus
-+#define EXTERN_C_BEGIN extern "C" {
-+#define EXTERN_C_END }
-+#else
-+#define EXTERN_C_BEGIN
-+#define EXTERN_C_END
-+#endif
-+#endif
-+
-+EXTERN_C_BEGIN
-+
-+#define SZ_OK 0
-+
-+#define SZ_ERROR_DATA 1
-+#define SZ_ERROR_MEM 2
-+#define SZ_ERROR_CRC 3
-+#define SZ_ERROR_UNSUPPORTED 4
-+#define SZ_ERROR_PARAM 5
-+#define SZ_ERROR_INPUT_EOF 6
-+#define SZ_ERROR_OUTPUT_EOF 7
-+#define SZ_ERROR_READ 8
-+#define SZ_ERROR_WRITE 9
-+#define SZ_ERROR_PROGRESS 10
-+#define SZ_ERROR_FAIL 11
-+#define SZ_ERROR_THREAD 12
-+
-+#define SZ_ERROR_ARCHIVE 16
-+#define SZ_ERROR_NO_ARCHIVE 17
-+
-+typedef int SRes;
-+
-+#ifdef _WIN32
-+typedef DWORD WRes;
-+#else
-+typedef int WRes;
-+#endif
-+
-+#ifndef RINOK
-+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
-+#endif
-+
-+typedef unsigned char Byte;
-+typedef short Int16;
-+typedef unsigned short UInt16;
-+
-+#ifdef _LZMA_UINT32_IS_ULONG
-+typedef long Int32;
-+typedef unsigned long UInt32;
-+#else
-+typedef int Int32;
-+typedef unsigned int UInt32;
-+#endif
-+
-+#ifdef _SZ_NO_INT_64
-+
-+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
-+   NOTES: Some code will work incorrectly in that case! */
-+
-+typedef long Int64;
-+typedef unsigned long UInt64;
-+
-+#else
-+
-+#if defined(_MSC_VER) || defined(__BORLANDC__)
-+typedef __int64 Int64;
-+typedef unsigned __int64 UInt64;
-+#else
-+typedef long long int Int64;
-+typedef unsigned long long int UInt64;
-+#endif
-+
-+#endif
-+
-+#ifdef _LZMA_NO_SYSTEM_SIZE_T
-+typedef UInt32 SizeT;
-+#else
-+typedef size_t SizeT;
-+#endif
-+
-+typedef int Bool;
-+#define True 1
-+#define False 0
-+
-+
-+#ifdef _WIN32
-+#define MY_STD_CALL __stdcall
-+#else
-+#define MY_STD_CALL
-+#endif
-+
-+#ifdef _MSC_VER
-+
-+#if _MSC_VER >= 1300
-+#define MY_NO_INLINE __declspec(noinline)
-+#else
-+#define MY_NO_INLINE
-+#endif
-+
-+#define MY_CDECL __cdecl
-+#define MY_FAST_CALL __fastcall
-+
-+#else
-+
-+#define MY_CDECL
-+#define MY_FAST_CALL
-+
-+#endif
-+
-+
-+/* The following interfaces use first parameter as pointer to structure */
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) < input(*size)) is allowed */
-+} ISeqInStream;
-+
-+/* it can return SZ_ERROR_INPUT_EOF */
-+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
-+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
-+
-+typedef struct
-+{
-+  size_t (*Write)(void *p, const void *buf, size_t size);
-+    /* Returns: result - the number of actually written bytes.
-+       (result < size) means error */
-+} ISeqOutStream;
-+
-+typedef enum
-+{
-+  SZ_SEEK_SET = 0,
-+  SZ_SEEK_CUR = 1,
-+  SZ_SEEK_END = 2
-+} ESzSeek;
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ISeekInStream;
-+
-+typedef struct
-+{
-+  SRes (*Look)(void *p, void **buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) > input(*size)) is not allowed
-+       (output(*size) < input(*size)) is allowed */
-+  SRes (*Skip)(void *p, size_t offset);
-+    /* offset must be <= output(*size) of Look */
-+
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* reads directly (without buffer). It's same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ILookInStream;
-+
-+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
-+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
-+
-+/* reads via ILookInStream::Read */
-+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
-+
-+#define LookToRead_BUF_SIZE (1 << 14)
-+
-+typedef struct
-+{
-+  ILookInStream s;
-+  ISeekInStream *realStream;
-+  size_t pos;
-+  size_t size;
-+  Byte buf[LookToRead_BUF_SIZE];
-+} CLookToRead;
-+
-+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
-+void LookToRead_Init(CLookToRead *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToLook;
-+
-+void SecToLook_CreateVTable(CSecToLook *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToRead;
-+
-+void SecToRead_CreateVTable(CSecToRead *p);
-+
-+typedef struct
-+{
-+  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
-+    /* Returns: result. (result != SZ_OK) means break.
-+       Value (UInt64)(Int64)-1 for size means unknown value. */
-+} ICompressProgress;
-+
-+typedef struct
-+{
-+  void *(*Alloc)(void *p, size_t size);
-+  void (*Free)(void *p, void *address); /* address can be 0 */
-+} ISzAlloc;
-+
-+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
-+#define IAlloc_Free(p, a) (p)->Free((p), a)
-+
-+EXTERN_C_END
-+
-+#endif
---- a/include/uapi/linux/jffs2.h
-+++ b/include/uapi/linux/jffs2.h
-@@ -46,6 +46,7 @@
- #define JFFS2_COMPR_DYNRUBIN	0x05
- #define JFFS2_COMPR_ZLIB	0x06
- #define JFFS2_COMPR_LZO		0x07
-+#define JFFS2_COMPR_LZMA	0x08
- /* Compatibility flags. */
- #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
- #define JFFS2_NODE_ACCURATE 0x2000
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -278,6 +278,12 @@ config ZSTD_DECOMPRESS
- 
- source "lib/xz/Kconfig"
- 
-+config LZMA_COMPRESS
-+    tristate
-+
-+config LZMA_DECOMPRESS
-+    tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -3,6 +3,16 @@
- # Makefile for some libs needed in the kernel.
- #
- 
-+ifdef CONFIG_JFFS2_ZLIB
-+	CONFIG_ZLIB_INFLATE:=y
-+	CONFIG_ZLIB_DEFLATE:=y
-+endif
-+
-+ifdef CONFIG_JFFS2_LZMA
-+	CONFIG_LZMA_DECOMPRESS:=y
-+	CONFIG_LZMA_COMPRESS:=y
-+endif
-+
- ifdef CONFIG_FUNCTION_TRACER
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
-@@ -139,6 +149,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
- obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
- obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma/
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
- 
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/lib/lzma/LzFind.c
-@@ -0,0 +1,761 @@
-+/* LzFind.c -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+#include "LzFind.h"
-+#include "LzHash.h"
-+
-+#define kEmptyHashValue 0
-+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
-+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
-+#define kNormalizeMask (~(kNormalizeStepMin - 1))
-+#define kMaxHistorySize ((UInt32)3 << 30)
-+
-+#define kStartMaxLen 3
-+
-+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  if (!p->directInput)
-+  {
-+    alloc->Free(alloc, p->bufferBase);
-+    p->bufferBase = 0;
-+  }
-+}
-+
-+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
-+
-+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
-+{
-+  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-+  if (p->directInput)
-+  {
-+    p->blockSize = blockSize;
-+    return 1;
-+  }
-+  if (p->bufferBase == 0 || p->blockSize != blockSize)
-+  {
-+    LzInWindow_Free(p, alloc);
-+    p->blockSize = blockSize;
-+    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
-+  }
-+  return (p->bufferBase != 0);
-+}
-+
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+
-+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+{
-+  p->posLimit -= subValue;
-+  p->pos -= subValue;
-+  p->streamPos -= subValue;
-+}
-+
-+static void MatchFinder_ReadBlock(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached || p->result != SZ_OK)
-+    return;
-+  if (p->directInput)
-+  {
-+    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-+    if (curSize > p->directInputRem)
-+      curSize = (UInt32)p->directInputRem;
-+    p->directInputRem -= curSize;
-+    p->streamPos += curSize;
-+    if (p->directInputRem == 0)
-+      p->streamEndWasReached = 1;
-+    return;
-+  }
-+  for (;;)
-+  {
-+    Byte *dest = p->buffer + (p->streamPos - p->pos);
-+    size_t size = (p->bufferBase + p->blockSize - dest);
-+    if (size == 0)
-+      return;
-+    p->result = p->stream->Read(p->stream, dest, &size);
-+    if (p->result != SZ_OK)
-+      return;
-+    if (size == 0)
-+    {
-+      p->streamEndWasReached = 1;
-+      return;
-+    }
-+    p->streamPos += (UInt32)size;
-+    if (p->streamPos - p->pos > p->keepSizeAfter)
-+      return;
-+  }
-+}
-+
-+void MatchFinder_MoveBlock(CMatchFinder *p)
-+{
-+  memmove(p->bufferBase,
-+    p->buffer - p->keepSizeBefore,
-+    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
-+  p->buffer = p->bufferBase + p->keepSizeBefore;
-+}
-+
-+int MatchFinder_NeedMove(CMatchFinder *p)
-+{
-+  if (p->directInput)
-+    return 0;
-+  /* if (p->streamEndWasReached) return 0; */
-+  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
-+}
-+
-+void MatchFinder_ReadIfRequired(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached)
-+    return;
-+  if (p->keepSizeAfter >= p->streamPos - p->pos)
-+    MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
-+{
-+  if (MatchFinder_NeedMove(p))
-+    MatchFinder_MoveBlock(p);
-+  MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
-+{
-+  p->cutValue = 32;
-+  p->btMode = 1;
-+  p->numHashBytes = 4;
-+  p->bigHash = 0;
-+}
-+
-+#define kCrcPoly 0xEDB88320
-+
-+void MatchFinder_Construct(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  p->bufferBase = 0;
-+  p->directInput = 0;
-+  p->hash = 0;
-+  MatchFinder_SetDefaultSettings(p);
-+
-+  for (i = 0; i < 256; i++)
-+  {
-+    UInt32 r = i;
-+    int j;
-+    for (j = 0; j < 8; j++)
-+      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
-+    p->crc[i] = r;
-+  }
-+}
-+
-+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->hash);
-+  p->hash = 0;
-+}
-+
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  MatchFinder_FreeThisClassMemory(p, alloc);
-+  LzInWindow_Free(p, alloc);
-+}
-+
-+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
-+{
-+  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
-+  if (sizeInBytes / sizeof(CLzRef) != num)
-+    return 0;
-+  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
-+}
-+
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc)
-+{
-+  UInt32 sizeReserv;
-+  if (historySize > kMaxHistorySize)
-+  {
-+    MatchFinder_Free(p, alloc);
-+    return 0;
-+  }
-+  sizeReserv = historySize >> 1;
-+  if (historySize > ((UInt32)2 << 30))
-+    sizeReserv = historySize >> 2;
-+  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
-+
-+  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
-+  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
-+  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
-+  if (LzInWindow_Create(p, sizeReserv, alloc))
-+  {
-+    UInt32 newCyclicBufferSize = historySize + 1;
-+    UInt32 hs;
-+    p->matchMaxLen = matchMaxLen;
-+    {
-+      p->fixedHashSize = 0;
-+      if (p->numHashBytes == 2)
-+        hs = (1 << 16) - 1;
-+      else
-+      {
-+        hs = historySize - 1;
-+        hs |= (hs >> 1);
-+        hs |= (hs >> 2);
-+        hs |= (hs >> 4);
-+        hs |= (hs >> 8);
-+        hs >>= 1;
-+        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
-+        if (hs > (1 << 24))
-+        {
-+          if (p->numHashBytes == 3)
-+            hs = (1 << 24) - 1;
-+          else
-+            hs >>= 1;
-+        }
-+      }
-+      p->hashMask = hs;
-+      hs++;
-+      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
-+      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
-+      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
-+      hs += p->fixedHashSize;
-+    }
-+
-+    {
-+      UInt32 prevSize = p->hashSizeSum + p->numSons;
-+      UInt32 newSize;
-+      p->historySize = historySize;
-+      p->hashSizeSum = hs;
-+      p->cyclicBufferSize = newCyclicBufferSize;
-+      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
-+      newSize = p->hashSizeSum + p->numSons;
-+      if (p->hash != 0 && prevSize == newSize)
-+        return 1;
-+      MatchFinder_FreeThisClassMemory(p, alloc);
-+      p->hash = AllocRefs(newSize, alloc);
-+      if (p->hash != 0)
-+      {
-+        p->son = p->hash + p->hashSizeSum;
-+        return 1;
-+      }
-+    }
-+  }
-+  MatchFinder_Free(p, alloc);
-+  return 0;
-+}
-+
-+static void MatchFinder_SetLimits(CMatchFinder *p)
-+{
-+  UInt32 limit = kMaxValForNormalize - p->pos;
-+  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  limit2 = p->streamPos - p->pos;
-+  if (limit2 <= p->keepSizeAfter)
-+  {
-+    if (limit2 > 0)
-+      limit2 = 1;
-+  }
-+  else
-+    limit2 -= p->keepSizeAfter;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  {
-+    UInt32 lenLimit = p->streamPos - p->pos;
-+    if (lenLimit > p->matchMaxLen)
-+      lenLimit = p->matchMaxLen;
-+    p->lenLimit = lenLimit;
-+  }
-+  p->posLimit = p->pos + limit;
-+}
-+
-+void MatchFinder_Init(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < p->hashSizeSum; i++)
-+    p->hash[i] = kEmptyHashValue;
-+  p->cyclicBufferPos = 0;
-+  p->buffer = p->bufferBase;
-+  p->pos = p->streamPos = p->cyclicBufferSize;
-+  p->result = SZ_OK;
-+  p->streamEndWasReached = 0;
-+  MatchFinder_ReadBlock(p);
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
-+{
-+  return (p->pos - p->historySize - 1) & kNormalizeMask;
-+}
-+
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+{
-+  UInt32 i;
-+  for (i = 0; i < numItems; i++)
-+  {
-+    UInt32 value = items[i];
-+    if (value <= subValue)
-+      value = kEmptyHashValue;
-+    else
-+      value -= subValue;
-+    items[i] = value;
-+  }
-+}
-+
-+static void MatchFinder_Normalize(CMatchFinder *p)
-+{
-+  UInt32 subValue = MatchFinder_GetSubValue(p);
-+  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
-+  MatchFinder_ReduceOffsets(p, subValue);
-+}
-+
-+static void MatchFinder_CheckLimits(CMatchFinder *p)
-+{
-+  if (p->pos == kMaxValForNormalize)
-+    MatchFinder_Normalize(p);
-+  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
-+    MatchFinder_CheckAndMoveAndRead(p);
-+  if (p->cyclicBufferPos == p->cyclicBufferSize)
-+    p->cyclicBufferPos = 0;
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  son[_cyclicBufferPos] = curMatch;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+      return distances;
-+    {
-+      const Byte *pb = cur - delta;
-+      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-+      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-+      {
-+        UInt32 len = 0;
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+            return distances;
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return distances;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        if (++len != lenLimit && pb[len] == cur[len])
-+          while (++len != lenLimit)
-+            if (pb[len] != cur[len])
-+              break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return distances;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        {
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+#define MOVE_POS \
-+  ++p->cyclicBufferPos; \
-+  p->buffer++; \
-+  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-+
-+#define MOVE_POS_RET MOVE_POS return offset;
-+
-+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-+
-+#define GET_MATCHES_HEADER2(minLen, ret_op) \
-+  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-+  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-+  cur = p->buffer;
-+
-+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
-+#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
-+
-+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
-+
-+#define GET_MATCHES_FOOTER(offset, maxLen) \
-+  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
-+  distances + offset, maxLen) - distances); MOVE_POS_RET;
-+
-+#define SKIP_FOOTER \
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
-+
-+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(2)
-+  HASH2_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 1)
-+}
-+
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 2)
-+}
-+
-+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, delta2, maxLen, offset;
-+  GET_MATCHES_HEADER(3)
-+
-+  HASH3_CALC;
-+
-+  delta2 = p->pos - p->hash[hash2Value];
-+  curMatch = p->hash[kFix3HashSize + hashValue];
-+  
-+  p->hash[hash2Value] =
-+  p->hash[kFix3HashSize + hashValue] = p->pos;
-+
-+
-+  maxLen = 2;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[0] = maxLen;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+  
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      p->son[p->cyclicBufferPos] = curMatch;
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances + offset, maxLen) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances, 2) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(2)
-+    HASH2_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value;
-+    SKIP_HEADER(3)
-+    HASH3_CALC;
-+    curMatch = p->hash[kFix3HashSize + hashValue];
-+    p->hash[hash2Value] =
-+    p->hash[kFix3HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] = p->pos;
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] =
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
-+{
-+  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-+  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-+  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-+  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-+  if (!p->btMode)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 2)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 3)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-+  }
-+  else
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-+  }
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaDec.c
-@@ -0,0 +1,999 @@
-+/* LzmaDec.c -- LZMA Decoder
-+2009-09-20 : Igor Pavlov : Public domain */
-+
-+#include "LzmaDec.h"
-+
-+#include <string.h>
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_INIT_SIZE 5
-+
-+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
-+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
-+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
-+  { UPDATE_0(p); i = (i + i); A0; } else \
-+  { UPDATE_1(p); i = (i + i) + 1; A1; }
-+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
-+
-+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
-+#define TREE_DECODE(probs, limit, i) \
-+  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
-+
-+/* #define _LZMA_SIZE_OPT */
-+
-+#ifdef _LZMA_SIZE_OPT
-+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
-+#else
-+#define TREE_6_DECODE(probs, i) \
-+  { i = 1; \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  i -= 0x40; }
-+#endif
-+
-+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0_CHECK range = bound;
-+#define UPDATE_1_CHECK range -= bound; code -= bound;
-+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
-+  { UPDATE_0_CHECK; i = (i + i); A0; } else \
-+  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
-+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
-+#define TREE_DECODE_CHECK(probs, limit, i) \
-+  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#define LZMA_DIC_MIN (1 << 12)
-+
-+/* First LZMA-symbol is always decoded.
-+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
-+Out:
-+  Result:
-+    SZ_OK - OK
-+    SZ_ERROR_DATA - Error
-+  p->remainLen:
-+    < kMatchSpecLenStart : normal remain
-+    = kMatchSpecLenStart : finished
-+    = kMatchSpecLenStart + 1 : Flush marker
-+    = kMatchSpecLenStart + 2 : State Init Marker
-+*/
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  CLzmaProb *probs = p->probs;
-+
-+  unsigned state = p->state;
-+  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
-+  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
-+  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
-+  unsigned lc = p->prop.lc;
-+
-+  Byte *dic = p->dic;
-+  SizeT dicBufSize = p->dicBufSize;
-+  SizeT dicPos = p->dicPos;
-+  
-+  UInt32 processedPos = p->processedPos;
-+  UInt32 checkDicSize = p->checkDicSize;
-+  unsigned len = 0;
-+
-+  const Byte *buf = p->buf;
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+
-+  do
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = processedPos & pbMask;
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0(prob)
-+    {
-+      unsigned symbol;
-+      UPDATE_0(prob);
-+      prob = probs + Literal;
-+      if (checkDicSize != 0 || processedPos != 0)
-+        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
-+        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        state -= (state < 4) ? state : 3;
-+        symbol = 1;
-+        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        state -= (state < 10) ? 3 : 6;
-+        symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      dic[dicPos++] = (Byte)symbol;
-+      processedPos++;
-+      continue;
-+    }
-+    else
-+    {
-+      UPDATE_1(prob);
-+      prob = probs + IsRep + state;
-+      IF_BIT_0(prob)
-+      {
-+        UPDATE_0(prob);
-+        state += kNumStates;
-+        prob = probs + LenCoder;
-+      }
-+      else
-+      {
-+        UPDATE_1(prob);
-+        if (checkDicSize == 0 && processedPos == 0)
-+          return SZ_ERROR_DATA;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0(prob)
-+        {
-+          UPDATE_0(prob);
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+            dicPos++;
-+            processedPos++;
-+            state = state < kNumLitStates ? 9 : 11;
-+            continue;
-+          }
-+          UPDATE_1(prob);
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          UPDATE_1(prob);
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            distance = rep1;
-+          }
-+          else
-+          {
-+            UPDATE_1(prob);
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0(prob)
-+            {
-+              UPDATE_0(prob);
-+              distance = rep2;
-+            }
-+            else
-+            {
-+              UPDATE_1(prob);
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        state = state < kNumLitStates ? 8 : 11;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0(probLen)
-+        {
-+          UPDATE_0(probLen);
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = (1 << kLenNumLowBits);
-+        }
-+        else
-+        {
-+          UPDATE_1(probLen);
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0(probLen)
-+          {
-+            UPDATE_0(probLen);
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = (1 << kLenNumMidBits);
-+          }
-+          else
-+          {
-+            UPDATE_1(probLen);
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = (1 << kLenNumHighBits);
-+          }
-+        }
-+        TREE_DECODE(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state >= kNumStates)
-+      {
-+        UInt32 distance;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
-+        TREE_6_DECODE(prob, distance);
-+        if (distance >= kStartPosModelIndex)
-+        {
-+          unsigned posSlot = (unsigned)distance;
-+          int numDirectBits = (int)(((distance >> 1) - 1));
-+          distance = (2 | (distance & 1));
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            distance <<= numDirectBits;
-+            prob = probs + SpecPos + distance - posSlot - 1;
-+            {
-+              UInt32 mask = 1;
-+              unsigned i = 1;
-+              do
-+              {
-+                GET_BIT2(prob + i, i, ; , distance |= mask);
-+                mask <<= 1;
-+              }
-+              while (--numDirectBits != 0);
-+            }
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE
-+              range >>= 1;
-+              
-+              {
-+                UInt32 t;
-+                code -= range;
-+                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
-+                distance = (distance << 1) + (t + 1);
-+                code += range & t;
-+              }
-+              /*
-+              distance <<= 1;
-+              if (code >= range)
-+              {
-+                code -= range;
-+                distance |= 1;
-+              }
-+              */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            distance <<= kNumAlignBits;
-+            {
-+              unsigned i = 1;
-+              GET_BIT2(prob + i, i, ; , distance |= 1);
-+              GET_BIT2(prob + i, i, ; , distance |= 2);
-+              GET_BIT2(prob + i, i, ; , distance |= 4);
-+              GET_BIT2(prob + i, i, ; , distance |= 8);
-+            }
-+            if (distance == (UInt32)0xFFFFFFFF)
-+            {
-+              len += kMatchSpecLenStart;
-+              state -= kNumStates;
-+              break;
-+            }
-+          }
-+        }
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        rep0 = distance + 1;
-+        if (checkDicSize == 0)
-+        {
-+          if (distance >= processedPos)
-+            return SZ_ERROR_DATA;
-+        }
-+        else if (distance >= checkDicSize)
-+          return SZ_ERROR_DATA;
-+        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-+      }
-+
-+      len += kMatchMinLen;
-+
-+      if (limit == dicPos)
-+        return SZ_ERROR_DATA;
-+      {
-+        SizeT rem = limit - dicPos;
-+        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
-+        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
-+
-+        processedPos += curLen;
-+
-+        len -= curLen;
-+        if (pos + curLen <= dicBufSize)
-+        {
-+          Byte *dest = dic + dicPos;
-+          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
-+          const Byte *lim = dest + curLen;
-+          dicPos += curLen;
-+          do
-+            *(dest) = (Byte)*(dest + src);
-+          while (++dest != lim);
-+        }
-+        else
-+        {
-+          do
-+          {
-+            dic[dicPos++] = dic[pos];
-+            if (++pos == dicBufSize)
-+              pos = 0;
-+          }
-+          while (--curLen != 0);
-+        }
-+      }
-+    }
-+  }
-+  while (dicPos < limit && buf < bufLimit);
-+  NORMALIZE;
-+  p->buf = buf;
-+  p->range = range;
-+  p->code = code;
-+  p->remainLen = len;
-+  p->dicPos = dicPos;
-+  p->processedPos = processedPos;
-+  p->reps[0] = rep0;
-+  p->reps[1] = rep1;
-+  p->reps[2] = rep2;
-+  p->reps[3] = rep3;
-+  p->state = state;
-+
-+  return SZ_OK;
-+}
-+
-+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
-+{
-+  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
-+  {
-+    Byte *dic = p->dic;
-+    SizeT dicPos = p->dicPos;
-+    SizeT dicBufSize = p->dicBufSize;
-+    unsigned len = p->remainLen;
-+    UInt32 rep0 = p->reps[0];
-+    if (limit - dicPos < len)
-+      len = (unsigned)(limit - dicPos);
-+
-+    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
-+      p->checkDicSize = p->prop.dicSize;
-+
-+    p->processedPos += len;
-+    p->remainLen -= len;
-+    while (len-- != 0)
-+    {
-+      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+      dicPos++;
-+    }
-+    p->dicPos = dicPos;
-+  }
-+}
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  do
-+  {
-+    SizeT limit2 = limit;
-+    if (p->checkDicSize == 0)
-+    {
-+      UInt32 rem = p->prop.dicSize - p->processedPos;
-+      if (limit - p->dicPos > rem)
-+        limit2 = p->dicPos + rem;
-+    }
-+    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
-+    if (p->processedPos >= p->prop.dicSize)
-+      p->checkDicSize = p->prop.dicSize;
-+    LzmaDec_WriteRem(p, limit);
-+  }
-+  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
-+
-+  if (p->remainLen > kMatchSpecLenStart)
-+  {
-+    p->remainLen = kMatchSpecLenStart;
-+  }
-+  return 0;
-+}
-+
-+typedef enum
-+{
-+  DUMMY_ERROR, /* unexpected end of input stream */
-+  DUMMY_LIT,
-+  DUMMY_MATCH,
-+  DUMMY_REP
-+} ELzmaDummy;
-+
-+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
-+{
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+  const Byte *bufLimit = buf + inSize;
-+  CLzmaProb *probs = p->probs;
-+  unsigned state = p->state;
-+  ELzmaDummy res;
-+
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0_CHECK(prob)
-+    {
-+      UPDATE_0_CHECK
-+
-+      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
-+
-+      prob = probs + Literal;
-+      if (p->checkDicSize != 0 || p->processedPos != 0)
-+        prob += (LZMA_LIT_SIZE *
-+          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
-+          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        unsigned symbol = 1;
-+        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
-+            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        unsigned symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      res = DUMMY_LIT;
-+    }
-+    else
-+    {
-+      unsigned len;
-+      UPDATE_1_CHECK;
-+
-+      prob = probs + IsRep + state;
-+      IF_BIT_0_CHECK(prob)
-+      {
-+        UPDATE_0_CHECK;
-+        state = 0;
-+        prob = probs + LenCoder;
-+        res = DUMMY_MATCH;
-+      }
-+      else
-+      {
-+        UPDATE_1_CHECK;
-+        res = DUMMY_REP;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0_CHECK(prob)
-+        {
-+          UPDATE_0_CHECK;
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+            NORMALIZE_CHECK;
-+            return DUMMY_REP;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+          }
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0_CHECK(prob)
-+            {
-+              UPDATE_0_CHECK;
-+            }
-+            else
-+            {
-+              UPDATE_1_CHECK;
-+            }
-+          }
-+        }
-+        state = kNumStates;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0_CHECK(probLen)
-+        {
-+          UPDATE_0_CHECK;
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = 1 << kLenNumLowBits;
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0_CHECK(probLen)
-+          {
-+            UPDATE_0_CHECK;
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = 1 << kLenNumMidBits;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = 1 << kLenNumHighBits;
-+          }
-+        }
-+        TREE_DECODE_CHECK(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state < 4)
-+      {
-+        unsigned posSlot;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
-+            kNumPosSlotBits);
-+        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+
-+          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
-+
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE_CHECK
-+              range >>= 1;
-+              code -= range & (((code - range) >> 31) - 1);
-+              /* if (code >= range) code -= range; */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            numDirectBits = kNumAlignBits;
-+          }
-+          {
-+            unsigned i = 1;
-+            do
-+            {
-+              GET_BIT_CHECK(prob + i, i);
-+            }
-+            while (--numDirectBits != 0);
-+          }
-+        }
-+      }
-+    }
-+  }
-+  NORMALIZE_CHECK;
-+  return res;
-+}
-+
-+
-+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
-+{
-+  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
-+  p->range = 0xFFFFFFFF;
-+  p->needFlush = 0;
-+}
-+
-+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+{
-+  p->needFlush = 1;
-+  p->remainLen = 0;
-+  p->tempBufSize = 0;
-+
-+  if (initDic)
-+  {
-+    p->processedPos = 0;
-+    p->checkDicSize = 0;
-+    p->needInitState = 1;
-+  }
-+  if (initState)
-+    p->needInitState = 1;
-+}
-+
-+void LzmaDec_Init(CLzmaDec *p)
-+{
-+  p->dicPos = 0;
-+  LzmaDec_InitDicAndState(p, True, True);
-+}
-+
-+static void LzmaDec_InitStateReal(CLzmaDec *p)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
-+  UInt32 i;
-+  CLzmaProb *probs = p->probs;
-+  for (i = 0; i < numProbs; i++)
-+    probs[i] = kBitModelTotal >> 1;
-+  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
-+  p->state = 0;
-+  p->needInitState = 0;
-+}
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+    ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT inSize = *srcLen;
-+  (*srcLen) = 0;
-+  LzmaDec_WriteRem(p, dicLimit);
-+  
-+  *status = LZMA_STATUS_NOT_SPECIFIED;
-+
-+  while (p->remainLen != kMatchSpecLenStart)
-+  {
-+      int checkEndMarkNow;
-+
-+      if (p->needFlush != 0)
-+      {
-+        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
-+          p->tempBuf[p->tempBufSize++] = *src++;
-+        if (p->tempBufSize < RC_INIT_SIZE)
-+        {
-+          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+          return SZ_OK;
-+        }
-+        if (p->tempBuf[0] != 0)
-+          return SZ_ERROR_DATA;
-+
-+        LzmaDec_InitRc(p, p->tempBuf);
-+        p->tempBufSize = 0;
-+      }
-+
-+      checkEndMarkNow = 0;
-+      if (p->dicPos >= dicLimit)
-+      {
-+        if (p->remainLen == 0 && p->code == 0)
-+        {
-+          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
-+          return SZ_OK;
-+        }
-+        if (finishMode == LZMA_FINISH_ANY)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_OK;
-+        }
-+        if (p->remainLen != 0)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_ERROR_DATA;
-+        }
-+        checkEndMarkNow = 1;
-+      }
-+
-+      if (p->needInitState)
-+        LzmaDec_InitStateReal(p);
-+  
-+      if (p->tempBufSize == 0)
-+      {
-+        SizeT processed;
-+        const Byte *bufLimit;
-+        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            memcpy(p->tempBuf, src, inSize);
-+            p->tempBufSize = (unsigned)inSize;
-+            (*srcLen) += inSize;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+          bufLimit = src;
-+        }
-+        else
-+          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
-+        p->buf = src;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
-+          return SZ_ERROR_DATA;
-+        processed = (SizeT)(p->buf - src);
-+        (*srcLen) += processed;
-+        src += processed;
-+        inSize -= processed;
-+      }
-+      else
-+      {
-+        unsigned rem = p->tempBufSize, lookAhead = 0;
-+        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
-+          p->tempBuf[rem++] = src[lookAhead++];
-+        p->tempBufSize = rem;
-+        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            (*srcLen) += lookAhead;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+        }
-+        p->buf = p->tempBuf;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
-+          return SZ_ERROR_DATA;
-+        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
-+        (*srcLen) += lookAhead;
-+        src += lookAhead;
-+        inSize -= lookAhead;
-+        p->tempBufSize = 0;
-+      }
-+  }
-+  if (p->code == 0)
-+    *status = LZMA_STATUS_FINISHED_WITH_MARK;
-+  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
-+}
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT outSize = *destLen;
-+  SizeT inSize = *srcLen;
-+  *srcLen = *destLen = 0;
-+  for (;;)
-+  {
-+    SizeT inSizeCur = inSize, outSizeCur, dicPos;
-+    ELzmaFinishMode curFinishMode;
-+    SRes res;
-+    if (p->dicPos == p->dicBufSize)
-+      p->dicPos = 0;
-+    dicPos = p->dicPos;
-+    if (outSize > p->dicBufSize - dicPos)
-+    {
-+      outSizeCur = p->dicBufSize;
-+      curFinishMode = LZMA_FINISH_ANY;
-+    }
-+    else
-+    {
-+      outSizeCur = dicPos + outSize;
-+      curFinishMode = finishMode;
-+    }
-+
-+    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-+    src += inSizeCur;
-+    inSize -= inSizeCur;
-+    *srcLen += inSizeCur;
-+    outSizeCur = p->dicPos - dicPos;
-+    memcpy(dest, p->dic + dicPos, outSizeCur);
-+    dest += outSizeCur;
-+    outSize -= outSizeCur;
-+    *destLen += outSizeCur;
-+    if (res != 0)
-+      return res;
-+    if (outSizeCur == 0 || outSize == 0)
-+      return SZ_OK;
-+  }
-+}
-+
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->probs);
-+  p->probs = 0;
-+}
-+
-+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->dic);
-+  p->dic = 0;
-+}
-+
-+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  LzmaDec_FreeProbs(p, alloc);
-+  LzmaDec_FreeDict(p, alloc);
-+}
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+{
-+  UInt32 dicSize;
-+  Byte d;
-+  
-+  if (size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_UNSUPPORTED;
-+  else
-+    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
-+ 
-+  if (dicSize < LZMA_DIC_MIN)
-+    dicSize = LZMA_DIC_MIN;
-+  p->dicSize = dicSize;
-+
-+  d = data[0];
-+  if (d >= (9 * 5 * 5))
-+    return SZ_ERROR_UNSUPPORTED;
-+
-+  p->lc = d % 9;
-+  d /= 9;
-+  p->pb = d / 5;
-+  p->lp = d % 5;
-+
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
-+{
-+  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
-+  if (p->probs == 0 || numProbs != p->numProbs)
-+  {
-+    LzmaDec_FreeProbs(p, alloc);
-+    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
-+    p->numProbs = numProbs;
-+    if (p->probs == 0)
-+      return SZ_ERROR_MEM;
-+  }
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  SizeT dicBufSize;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  dicBufSize = propNew.dicSize;
-+  if (p->dic == 0 || dicBufSize != p->dicBufSize)
-+  {
-+    LzmaDec_FreeDict(p, alloc);
-+    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-+    if (p->dic == 0)
-+    {
-+      LzmaDec_FreeProbs(p, alloc);
-+      return SZ_ERROR_MEM;
-+    }
-+  }
-+  p->dicBufSize = dicBufSize;
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc)
-+{
-+  CLzmaDec p;
-+  SRes res;
-+  SizeT inSize = *srcLen;
-+  SizeT outSize = *destLen;
-+  *srcLen = *destLen = 0;
-+  if (inSize < RC_INIT_SIZE)
-+    return SZ_ERROR_INPUT_EOF;
-+
-+  LzmaDec_Construct(&p);
-+  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
-+  if (res != 0)
-+    return res;
-+  p.dic = dest;
-+  p.dicBufSize = outSize;
-+
-+  LzmaDec_Init(&p);
-+  
-+  *srcLen = inSize;
-+  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
-+
-+  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
-+    res = SZ_ERROR_INPUT_EOF;
-+
-+  (*destLen) = p.dicPos;
-+  LzmaDec_FreeProbs(&p, alloc);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaEnc.c
-@@ -0,0 +1,2271 @@
-+/* LzmaEnc.c -- LZMA Encoder
-+2009-11-24 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+/* #define SHOW_STAT */
-+/* #define SHOW_STAT2 */
-+
-+#if defined(SHOW_STAT) || defined(SHOW_STAT2)
-+#include <stdio.h>
-+#endif
-+
-+#include "LzmaEnc.h"
-+
-+/* disable MT */
-+#define _7ZIP_ST
-+
-+#include "LzFind.h"
-+#ifndef _7ZIP_ST
-+#include "LzFindMt.h"
-+#endif
-+
-+#ifdef SHOW_STAT
-+static int ttt = 0;
-+#endif
-+
-+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
-+
-+#define kBlockSize (9 << 10)
-+#define kUnpackBlockSize (1 << 18)
-+#define kMatchArraySize (1 << 21)
-+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
-+
-+#define kNumMaxDirectBits (31)
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+#define kProbInitValue (kBitModelTotal >> 1)
-+
-+#define kNumMoveReducingBits 4
-+#define kNumBitPriceShiftBits 4
-+#define kBitPrice (1 << kNumBitPriceShiftBits)
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p)
-+{
-+  p->level = 5;
-+  p->dictSize = p->mc = 0;
-+  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
-+  p->writeEndMark = 0;
-+}
-+
-+void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+{
-+  int level = p->level;
-+  if (level < 0) level = 5;
-+  p->level = level;
-+  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
-+  if (p->lc < 0) p->lc = 3;
-+  if (p->lp < 0) p->lp = 0;
-+  if (p->pb < 0) p->pb = 2;
-+  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
-+  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
-+  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
-+  if (p->numHashBytes < 0) p->numHashBytes = 4;
-+  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
-+  if (p->numThreads < 0)
-+    p->numThreads =
-+      #ifndef _7ZIP_ST
-+      ((p->btMode && p->algo) ? 2 : 1);
-+      #else
-+      1;
-+      #endif
-+}
-+
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+{
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+  return props.dictSize;
-+}
-+
-+/* #define LZMA_LOG_BSR */
-+/* Define it for Intel's CPU */
-+
-+
-+#ifdef LZMA_LOG_BSR
-+
-+#define kDicLogSizeMaxCompress 30
-+
-+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-+
-+UInt32 GetPosSlot1(UInt32 pos)
-+{
-+  UInt32 res;
-+  BSR2_RET(pos, res);
-+  return res;
-+}
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
-+
-+#else
-+
-+#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
-+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-+
-+void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+{
-+  int c = 2, slotFast;
-+  g_FastPos[0] = 0;
-+  g_FastPos[1] = 1;
-+  
-+  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
-+  {
-+    UInt32 k = (1 << ((slotFast >> 1) - 1));
-+    UInt32 j;
-+    for (j = 0; j < k; j++, c++)
-+      g_FastPos[c] = (Byte)slotFast;
-+  }
-+}
-+
-+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
-+  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
-+  res = p->g_FastPos[pos >> i] + (i * 2); }
-+/*
-+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
-+  p->g_FastPos[pos >> 6] + 12 : \
-+  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
-+*/
-+
-+#define GetPosSlot1(pos) p->g_FastPos[pos]
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
-+
-+#endif
-+
-+
-+#define LZMA_NUM_REPS 4
-+
-+typedef unsigned CState;
-+
-+typedef struct
-+{
-+  UInt32 price;
-+
-+  CState state;
-+  int prev1IsChar;
-+  int prev2;
-+
-+  UInt32 posPrev2;
-+  UInt32 backPrev2;
-+
-+  UInt32 posPrev;
-+  UInt32 backPrev;
-+  UInt32 backs[LZMA_NUM_REPS];
-+} COptimal;
-+
-+#define kNumOpts (1 << 12)
-+
-+#define kNumLenToPosStates 4
-+#define kNumPosSlotBits 6
-+#define kDicLogSizeMin 0
-+#define kDicLogSizeMax 32
-+#define kDistTableSizeMax (kDicLogSizeMax * 2)
-+
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+#define kAlignMask (kAlignTableSize - 1)
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
-+
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+#define LZMA_PB_MAX 4
-+#define LZMA_LC_MAX 8
-+#define LZMA_LP_MAX 4
-+
-+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
-+
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define LZMA_MATCH_LEN_MIN 2
-+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
-+
-+#define kNumStates 12
-+
-+typedef struct
-+{
-+  CLzmaProb choice;
-+  CLzmaProb choice2;
-+  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
-+  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
-+  CLzmaProb high[kLenNumHighSymbols];
-+} CLenEnc;
-+
-+typedef struct
-+{
-+  CLenEnc p;
-+  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
-+  UInt32 tableSize;
-+  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
-+} CLenPriceEnc;
-+
-+typedef struct
-+{
-+  UInt32 range;
-+  Byte cache;
-+  UInt64 low;
-+  UInt64 cacheSize;
-+  Byte *buf;
-+  Byte *bufLim;
-+  Byte *bufBase;
-+  ISeqOutStream *outStream;
-+  UInt64 processed;
-+  SRes res;
-+} CRangeEnc;
-+
-+typedef struct
-+{
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+  
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+} CSaveState;
-+
-+typedef struct
-+{
-+  IMatchFinder matchFinder;
-+  void *matchFinderObj;
-+
-+  #ifndef _7ZIP_ST
-+  Bool mtMode;
-+  CMatchFinderMt matchFinderMt;
-+  #endif
-+
-+  CMatchFinder matchFinderBase;
-+
-+  #ifndef _7ZIP_ST
-+  Byte pad[128];
-+  #endif
-+  
-+  UInt32 optimumEndIndex;
-+  UInt32 optimumCurrentIndex;
-+
-+  UInt32 longestMatchLength;
-+  UInt32 numPairs;
-+  UInt32 numAvail;
-+  COptimal opt[kNumOpts];
-+  
-+  #ifndef LZMA_LOG_BSR
-+  Byte g_FastPos[1 << kNumLogBits];
-+  #endif
-+
-+  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
-+  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
-+  UInt32 numFastBytes;
-+  UInt32 additionalOffset;
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+
-+  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
-+  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
-+  UInt32 alignPrices[kAlignTableSize];
-+  UInt32 alignPriceCount;
-+
-+  UInt32 distTableSize;
-+
-+  unsigned lc, lp, pb;
-+  unsigned lpMask, pbMask;
-+
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+  
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  unsigned lclp;
-+
-+  Bool fastMode;
-+  
-+  CRangeEnc rc;
-+
-+  Bool writeEndMark;
-+  UInt64 nowPos64;
-+  UInt32 matchPriceCount;
-+  Bool finished;
-+  Bool multiThread;
-+
-+  SRes result;
-+  UInt32 dictSize;
-+  UInt32 matchFinderCycles;
-+
-+  int needInit;
-+
-+  CSaveState saveState;
-+} CLzmaEnc;
-+
-+void LzmaEnc_SaveState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CSaveState *dest = &p->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
-+}
-+
-+void LzmaEnc_RestoreState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *dest = (CLzmaEnc *)pp;
-+  const CSaveState *p = &dest->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
-+}
-+
-+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+
-+  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
-+      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
-+    return SZ_ERROR_PARAM;
-+  p->dictSize = props.dictSize;
-+  p->matchFinderCycles = props.mc;
-+  {
-+    unsigned fb = props.fb;
-+    if (fb < 5)
-+      fb = 5;
-+    if (fb > LZMA_MATCH_LEN_MAX)
-+      fb = LZMA_MATCH_LEN_MAX;
-+    p->numFastBytes = fb;
-+  }
-+  p->lc = props.lc;
-+  p->lp = props.lp;
-+  p->pb = props.pb;
-+  p->fastMode = (props.algo == 0);
-+  p->matchFinderBase.btMode = props.btMode;
-+  {
-+    UInt32 numHashBytes = 4;
-+    if (props.btMode)
-+    {
-+      if (props.numHashBytes < 2)
-+        numHashBytes = 2;
-+      else if (props.numHashBytes < 4)
-+        numHashBytes = props.numHashBytes;
-+    }
-+    p->matchFinderBase.numHashBytes = numHashBytes;
-+  }
-+
-+  p->matchFinderBase.cutValue = props.mc;
-+
-+  p->writeEndMark = props.writeEndMark;
-+
-+  #ifndef _7ZIP_ST
-+  /*
-+  if (newMultiThread != _multiThread)
-+  {
-+    ReleaseMatchFinder();
-+    _multiThread = newMultiThread;
-+  }
-+  */
-+  p->multiThread = (props.numThreads > 1);
-+  #endif
-+
-+  return SZ_OK;
-+}
-+
-+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
-+static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
-+static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
-+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
-+
-+#define IsCharState(s) ((s) < 7)
-+
-+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
-+
-+#define kInfinityPrice (1 << 30)
-+
-+static void RangeEnc_Construct(CRangeEnc *p)
-+{
-+  p->outStream = 0;
-+  p->bufBase = 0;
-+}
-+
-+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
-+
-+#define RC_BUF_SIZE (1 << 16)
-+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  if (p->bufBase == 0)
-+  {
-+    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
-+    if (p->bufBase == 0)
-+      return 0;
-+    p->bufLim = p->bufBase + RC_BUF_SIZE;
-+  }
-+  return 1;
-+}
-+
-+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->bufBase);
-+  p->bufBase = 0;
-+}
-+
-+static void RangeEnc_Init(CRangeEnc *p)
-+{
-+  /* Stream.Init(); */
-+  p->low = 0;
-+  p->range = 0xFFFFFFFF;
-+  p->cacheSize = 1;
-+  p->cache = 0;
-+
-+  p->buf = p->bufBase;
-+
-+  p->processed = 0;
-+  p->res = SZ_OK;
-+}
-+
-+static void RangeEnc_FlushStream(CRangeEnc *p)
-+{
-+  size_t num;
-+  if (p->res != SZ_OK)
-+    return;
-+  num = p->buf - p->bufBase;
-+  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
-+    p->res = SZ_ERROR_WRITE;
-+  p->processed += num;
-+  p->buf = p->bufBase;
-+}
-+
-+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
-+{
-+  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
-+  {
-+    Byte temp = p->cache;
-+    do
-+    {
-+      Byte *buf = p->buf;
-+      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
-+      p->buf = buf;
-+      if (buf == p->bufLim)
-+        RangeEnc_FlushStream(p);
-+      temp = 0xFF;
-+    }
-+    while (--p->cacheSize != 0);
-+    p->cache = (Byte)((UInt32)p->low >> 24);
-+  }
-+  p->cacheSize++;
-+  p->low = (UInt32)p->low << 8;
-+}
-+
-+static void RangeEnc_FlushData(CRangeEnc *p)
-+{
-+  int i;
-+  for (i = 0; i < 5; i++)
-+    RangeEnc_ShiftLow(p);
-+}
-+
-+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
-+{
-+  do
-+  {
-+    p->range >>= 1;
-+    p->low += p->range & (0 - ((value >> --numBits) & 1));
-+    if (p->range < kTopValue)
-+    {
-+      p->range <<= 8;
-+      RangeEnc_ShiftLow(p);
-+    }
-+  }
-+  while (numBits != 0);
-+}
-+
-+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
-+{
-+  UInt32 ttt = *prob;
-+  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
-+  if (symbol == 0)
-+  {
-+    p->range = newBound;
-+    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
-+  }
-+  else
-+  {
-+    p->low += newBound;
-+    p->range -= newBound;
-+    ttt -= ttt >> kNumMoveBits;
-+  }
-+  *prob = (CLzmaProb)ttt;
-+  if (p->range < kTopValue)
-+  {
-+    p->range <<= 8;
-+    RangeEnc_ShiftLow(p);
-+  }
-+}
-+
-+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
-+{
-+  symbol |= 0x100;
-+  do
-+  {
-+    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
-+{
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+{
-+  UInt32 i;
-+  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-+  {
-+    const int kCyclesBits = kNumBitPriceShiftBits;
-+    UInt32 w = i;
-+    UInt32 bitCount = 0;
-+    int j;
-+    for (j = 0; j < kCyclesBits; j++)
-+    {
-+      w = w * w;
-+      bitCount <<= 1;
-+      while (w >= ((UInt32)1 << 16))
-+      {
-+        w >>= 1;
-+        bitCount++;
-+      }
-+    }
-+    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
-+  }
-+}
-+
-+
-+#define GET_PRICE(prob, symbol) \
-+  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICEa(prob, symbol) \
-+  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= 0x100;
-+  do
-+  {
-+    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+
-+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0;)
-+  {
-+    UInt32 bit;
-+    i--;
-+    bit = (symbol >> i) & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+  }
-+}
-+
-+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = 0; i < numBitLevels; i++)
-+  {
-+    UInt32 bit = symbol & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+    symbol >>= 1;
-+  }
-+}
-+
-+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= (1 << numBitLevels);
-+  while (symbol != 1)
-+  {
-+    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
-+    symbol >>= 1;
-+  }
-+  return price;
-+}
-+
-+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0; i--)
-+  {
-+    UInt32 bit = symbol & 1;
-+    symbol >>= 1;
-+    price += GET_PRICEa(probs[m], bit);
-+    m = (m << 1) | bit;
-+  }
-+  return price;
-+}
-+
-+
-+static void LenEnc_Init(CLenEnc *p)
-+{
-+  unsigned i;
-+  p->choice = p->choice2 = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
-+    p->low[i] = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
-+    p->mid[i] = kProbInitValue;
-+  for (i = 0; i < kLenNumHighSymbols; i++)
-+    p->high[i] = kProbInitValue;
-+}
-+
-+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
-+{
-+  if (symbol < kLenNumLowSymbols)
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 0);
-+    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
-+  }
-+  else
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 1);
-+    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 0);
-+      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 1);
-+      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
-+    }
-+  }
-+}
-+
-+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
-+{
-+  UInt32 a0 = GET_PRICE_0a(p->choice);
-+  UInt32 a1 = GET_PRICE_1a(p->choice);
-+  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
-+  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
-+  UInt32 i = 0;
-+  for (i = 0; i < kLenNumLowSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
-+  }
-+  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
-+  }
-+  for (; i < numSymbols; i++)
-+    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
-+}
-+
-+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
-+{
-+  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
-+  p->counters[posState] = p->tableSize;
-+}
-+
-+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
-+{
-+  UInt32 posState;
-+  for (posState = 0; posState < numPosStates; posState++)
-+    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
-+{
-+  LenEnc_Encode(&p->p, rc, symbol, posState);
-+  if (updatePrice)
-+    if (--p->counters[posState] == 0)
-+      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+
-+
-+
-+static void MovePos(CLzmaEnc *p, UInt32 num)
-+{
-+  #ifdef SHOW_STAT
-+  ttt += num;
-+  printf("\n MovePos %d", num);
-+  #endif
-+  if (num != 0)
-+  {
-+    p->additionalOffset += num;
-+    p->matchFinder.Skip(p->matchFinderObj, num);
-+  }
-+}
-+
-+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
-+{
-+  UInt32 lenRes = 0, numPairs;
-+  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
-+  #ifdef SHOW_STAT
-+  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
-+  ttt++;
-+  {
-+    UInt32 i;
-+    for (i = 0; i < numPairs; i += 2)
-+      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
-+  }
-+  #endif
-+  if (numPairs > 0)
-+  {
-+    lenRes = p->matches[numPairs - 2];
-+    if (lenRes == p->numFastBytes)
-+    {
-+      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+      UInt32 distance = p->matches[numPairs - 1] + 1;
-+      UInt32 numAvail = p->numAvail;
-+      if (numAvail > LZMA_MATCH_LEN_MAX)
-+        numAvail = LZMA_MATCH_LEN_MAX;
-+      {
-+        const Byte *pby2 = pby - distance;
-+        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
-+      }
-+    }
-+  }
-+  p->additionalOffset++;
-+  *numDistancePairsRes = numPairs;
-+  return lenRes;
-+}
-+
-+
-+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
-+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
-+#define IsShortRep(p) ((p)->backPrev == 0)
-+
-+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
-+{
-+  return
-+    GET_PRICE_0(p->isRepG0[state]) +
-+    GET_PRICE_0(p->isRep0Long[state][posState]);
-+}
-+
-+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
-+{
-+  UInt32 price;
-+  if (repIndex == 0)
-+  {
-+    price = GET_PRICE_0(p->isRepG0[state]);
-+    price += GET_PRICE_1(p->isRep0Long[state][posState]);
-+  }
-+  else
-+  {
-+    price = GET_PRICE_1(p->isRepG0[state]);
-+    if (repIndex == 1)
-+      price += GET_PRICE_0(p->isRepG1[state]);
-+    else
-+    {
-+      price += GET_PRICE_1(p->isRepG1[state]);
-+      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
-+    }
-+  }
-+  return price;
-+}
-+
-+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
-+{
-+  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
-+    GetPureRepPrice(p, repIndex, state, posState);
-+}
-+
-+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
-+{
-+  UInt32 posMem = p->opt[cur].posPrev;
-+  UInt32 backMem = p->opt[cur].backPrev;
-+  p->optimumEndIndex = cur;
-+  do
-+  {
-+    if (p->opt[cur].prev1IsChar)
-+    {
-+      MakeAsChar(&p->opt[posMem])
-+      p->opt[posMem].posPrev = posMem - 1;
-+      if (p->opt[cur].prev2)
-+      {
-+        p->opt[posMem - 1].prev1IsChar = False;
-+        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
-+        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
-+      }
-+    }
-+    {
-+      UInt32 posPrev = posMem;
-+      UInt32 backCur = backMem;
-+      
-+      backMem = p->opt[posPrev].backPrev;
-+      posMem = p->opt[posPrev].posPrev;
-+      
-+      p->opt[posPrev].backPrev = backCur;
-+      p->opt[posPrev].posPrev = cur;
-+      cur = posPrev;
-+    }
-+  }
-+  while (cur != 0);
-+  *backRes = p->opt[0].backPrev;
-+  p->optimumCurrentIndex  = p->opt[0].posPrev;
-+  return p->optimumCurrentIndex;
-+}
-+
-+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
-+
-+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
-+  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
-+  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
-+  UInt32 *matches;
-+  const Byte *data;
-+  Byte curByte, matchByte;
-+  if (p->optimumEndIndex != p->optimumCurrentIndex)
-+  {
-+    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
-+    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
-+    *backRes = opt->backPrev;
-+    p->optimumCurrentIndex = opt->posPrev;
-+    return lenRes;
-+  }
-+  p->optimumCurrentIndex = p->optimumEndIndex = 0;
-+  
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  if (numAvail < 2)
-+  {
-+    *backRes = (UInt32)(-1);
-+    return 1;
-+  }
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  repMaxIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 lenTest;
-+    const Byte *data2;
-+    reps[i] = p->reps[i];
-+    data2 = data - (reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+    {
-+      repLens[i] = 0;
-+      continue;
-+    }
-+    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+    repLens[i] = lenTest;
-+    if (lenTest > repLens[repMaxIndex])
-+      repMaxIndex = i;
-+  }
-+  if (repLens[repMaxIndex] >= p->numFastBytes)
-+  {
-+    UInt32 lenRes;
-+    *backRes = repMaxIndex;
-+    lenRes = repLens[repMaxIndex];
-+    MovePos(p, lenRes - 1);
-+    return lenRes;
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+  curByte = *data;
-+  matchByte = *(data - (reps[0] + 1));
-+
-+  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
-+  {
-+    *backRes = (UInt32)-1;
-+    return 1;
-+  }
-+
-+  p->opt[0].state = (CState)p->state;
-+
-+  posState = (position & p->pbMask);
-+
-+  {
-+    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
-+        (!IsCharState(p->state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+  }
-+
-+  MakeAsChar(&p->opt[1]);
-+
-+  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
-+  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
-+
-+  if (matchByte == curByte)
-+  {
-+    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
-+    if (shortRepPrice < p->opt[1].price)
-+    {
-+      p->opt[1].price = shortRepPrice;
-+      MakeAsShortRep(&p->opt[1]);
-+    }
-+  }
-+  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
-+
-+  if (lenEnd < 2)
-+  {
-+    *backRes = p->opt[1].backPrev;
-+    return 1;
-+  }
-+
-+  p->opt[1].posPrev = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+    p->opt[0].backs[i] = reps[i];
-+
-+  len = lenEnd;
-+  do
-+    p->opt[len--].price = kInfinityPrice;
-+  while (len >= 2);
-+
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 repLen = repLens[i];
-+    UInt32 price;
-+    if (repLen < 2)
-+      continue;
-+    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
-+    do
-+    {
-+      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
-+      COptimal *opt = &p->opt[repLen];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = i;
-+        opt->prev1IsChar = False;
-+      }
-+    }
-+    while (--repLen >= 2);
-+  }
-+
-+  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
-+
-+  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
-+  if (len <= mainLen)
-+  {
-+    UInt32 offs = 0;
-+    while (len > matches[offs])
-+      offs += 2;
-+    for (; ; len++)
-+    {
-+      COptimal *opt;
-+      UInt32 distance = matches[offs + 1];
-+
-+      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
-+      UInt32 lenToPosState = GetLenToPosState(len);
-+      if (distance < kNumFullDistances)
-+        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
-+      else
-+      {
-+        UInt32 slot;
-+        GetPosSlot2(distance, slot);
-+        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
-+      }
-+      opt = &p->opt[len];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = distance + LZMA_NUM_REPS;
-+        opt->prev1IsChar = False;
-+      }
-+      if (len == matches[offs])
-+      {
-+        offs += 2;
-+        if (offs == numPairs)
-+          break;
-+      }
-+    }
-+  }
-+
-+  cur = 0;
-+
-+    #ifdef SHOW_STAT2
-+    if (position >= 0)
-+    {
-+      unsigned i;
-+      printf("\n pos = %4X", position);
-+      for (i = cur; i <= lenEnd; i++)
-+      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
-+    }
-+    #endif
-+
-+  for (;;)
-+  {
-+    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
-+    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
-+    Bool nextIsChar;
-+    Byte curByte, matchByte;
-+    const Byte *data;
-+    COptimal *curOpt;
-+    COptimal *nextOpt;
-+
-+    cur++;
-+    if (cur == lenEnd)
-+      return Backward(p, backRes, cur);
-+
-+    newLen = ReadMatchDistances(p, &numPairs);
-+    if (newLen >= p->numFastBytes)
-+    {
-+      p->numPairs = numPairs;
-+      p->longestMatchLength = newLen;
-+      return Backward(p, backRes, cur);
-+    }
-+    position++;
-+    curOpt = &p->opt[cur];
-+    posPrev = curOpt->posPrev;
-+    if (curOpt->prev1IsChar)
-+    {
-+      posPrev--;
-+      if (curOpt->prev2)
-+      {
-+        state = p->opt[curOpt->posPrev2].state;
-+        if (curOpt->backPrev2 < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      else
-+        state = p->opt[posPrev].state;
-+      state = kLiteralNextStates[state];
-+    }
-+    else
-+      state = p->opt[posPrev].state;
-+    if (posPrev == cur - 1)
-+    {
-+      if (IsShortRep(curOpt))
-+        state = kShortRepNextStates[state];
-+      else
-+        state = kLiteralNextStates[state];
-+    }
-+    else
-+    {
-+      UInt32 pos;
-+      const COptimal *prevOpt;
-+      if (curOpt->prev1IsChar && curOpt->prev2)
-+      {
-+        posPrev = curOpt->posPrev2;
-+        pos = curOpt->backPrev2;
-+        state = kRepNextStates[state];
-+      }
-+      else
-+      {
-+        pos = curOpt->backPrev;
-+        if (pos < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      prevOpt = &p->opt[posPrev];
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        UInt32 i;
-+        reps[0] = prevOpt->backs[pos];
-+        for (i = 1; i <= pos; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+        for (; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i];
-+      }
-+      else
-+      {
-+        UInt32 i;
-+        reps[0] = (pos - LZMA_NUM_REPS);
-+        for (i = 1; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+      }
-+    }
-+    curOpt->state = (CState)state;
-+
-+    curOpt->backs[0] = reps[0];
-+    curOpt->backs[1] = reps[1];
-+    curOpt->backs[2] = reps[2];
-+    curOpt->backs[3] = reps[3];
-+
-+    curPrice = curOpt->price;
-+    nextIsChar = False;
-+    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+    curByte = *data;
-+    matchByte = *(data - (reps[0] + 1));
-+
-+    posState = (position & p->pbMask);
-+
-+    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
-+    {
-+      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+      curAnd1Price +=
-+        (!IsCharState(state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+    }
-+
-+    nextOpt = &p->opt[cur + 1];
-+
-+    if (curAnd1Price < nextOpt->price)
-+    {
-+      nextOpt->price = curAnd1Price;
-+      nextOpt->posPrev = cur;
-+      MakeAsChar(nextOpt);
-+      nextIsChar = True;
-+    }
-+
-+    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
-+    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
-+    
-+    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
-+    {
-+      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
-+      if (shortRepPrice <= nextOpt->price)
-+      {
-+        nextOpt->price = shortRepPrice;
-+        nextOpt->posPrev = cur;
-+        MakeAsShortRep(nextOpt);
-+        nextIsChar = True;
-+      }
-+    }
-+    numAvailFull = p->numAvail;
-+    {
-+      UInt32 temp = kNumOpts - 1 - cur;
-+      if (temp < numAvailFull)
-+        numAvailFull = temp;
-+    }
-+
-+    if (numAvailFull < 2)
-+      continue;
-+    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
-+
-+    if (!nextIsChar && matchByte != curByte) /* speed optimization */
-+    {
-+      /* try Literal + rep0 */
-+      UInt32 temp;
-+      UInt32 lenTest2;
-+      const Byte *data2 = data - (reps[0] + 1);
-+      UInt32 limit = p->numFastBytes + 1;
-+      if (limit > numAvailFull)
-+        limit = numAvailFull;
-+
-+      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
-+      lenTest2 = temp - 1;
-+      if (lenTest2 >= 2)
-+      {
-+        UInt32 state2 = kLiteralNextStates[state];
-+        UInt32 posStateNext = (position + 1) & p->pbMask;
-+        UInt32 nextRepMatchPrice = curAnd1Price +
-+            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+            GET_PRICE_1(p->isRep[state2]);
-+        /* for (; lenTest2 >= 2; lenTest2--) */
-+        {
-+          UInt32 curAndLenPrice;
-+          COptimal *opt;
-+          UInt32 offset = cur + 1 + lenTest2;
-+          while (lenEnd < offset)
-+            p->opt[++lenEnd].price = kInfinityPrice;
-+          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+          opt = &p->opt[offset];
-+          if (curAndLenPrice < opt->price)
-+          {
-+            opt->price = curAndLenPrice;
-+            opt->posPrev = cur + 1;
-+            opt->backPrev = 0;
-+            opt->prev1IsChar = True;
-+            opt->prev2 = False;
-+          }
-+        }
-+      }
-+    }
-+    
-+    startLen = 2; /* speed optimization */
-+    {
-+    UInt32 repIndex;
-+    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
-+    {
-+      UInt32 lenTest;
-+      UInt32 lenTestTemp;
-+      UInt32 price;
-+      const Byte *data2 = data - (reps[repIndex] + 1);
-+      if (data[0] != data2[0] || data[1] != data2[1])
-+        continue;
-+      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+      while (lenEnd < cur + lenTest)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+      lenTestTemp = lenTest;
-+      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
-+      do
-+      {
-+        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
-+        COptimal *opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = repIndex;
-+          opt->prev1IsChar = False;
-+        }
-+      }
-+      while (--lenTest >= 2);
-+      lenTest = lenTestTemp;
-+      
-+      if (repIndex == 0)
-+        startLen = lenTest + 1;
-+        
-+      /* if (_maxMode) */
-+        {
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kRepNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice =
-+                price + p->repLenEnc.prices[posState][lenTest - 2] +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (position + lenTest + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+            
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = repIndex;
-+              }
-+            }
-+          }
-+        }
-+    }
-+    }
-+    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
-+    if (newLen > numAvail)
-+    {
-+      newLen = numAvail;
-+      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
-+      matches[numPairs] = newLen;
-+      numPairs += 2;
-+    }
-+    if (newLen >= startLen)
-+    {
-+      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
-+      UInt32 offs, curBack, posSlot;
-+      UInt32 lenTest;
-+      while (lenEnd < cur + newLen)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+
-+      offs = 0;
-+      while (startLen > matches[offs])
-+        offs += 2;
-+      curBack = matches[offs + 1];
-+      GetPosSlot2(curBack, posSlot);
-+      for (lenTest = /*2*/ startLen; ; lenTest++)
-+      {
-+        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
-+        UInt32 lenToPosState = GetLenToPosState(lenTest);
-+        COptimal *opt;
-+        if (curBack < kNumFullDistances)
-+          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
-+        else
-+          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
-+        
-+        opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = curBack + LZMA_NUM_REPS;
-+          opt->prev1IsChar = False;
-+        }
-+
-+        if (/*_maxMode && */lenTest == matches[offs])
-+        {
-+          /* Try Match + Literal + Rep0 */
-+          const Byte *data2 = data - (curBack + 1);
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kMatchNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice = curAndLenPrice +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (posStateNext + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+            
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = curBack + LZMA_NUM_REPS;
-+              }
-+            }
-+          }
-+          offs += 2;
-+          if (offs == numPairs)
-+            break;
-+          curBack = matches[offs + 1];
-+          if (curBack >= kNumFullDistances)
-+            GetPosSlot2(curBack, posSlot);
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
-+
-+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
-+  const Byte *data;
-+  const UInt32 *matches;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  *backRes = (UInt32)-1;
-+  if (numAvail < 2)
-+    return 1;
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+
-+  repLen = repIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
-+    if (len >= p->numFastBytes)
-+    {
-+      *backRes = i;
-+      MovePos(p, len - 1);
-+      return len;
-+    }
-+    if (len > repLen)
-+    {
-+      repIndex = i;
-+      repLen = len;
-+    }
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+
-+  mainDist = 0; /* for GCC */
-+  if (mainLen >= 2)
-+  {
-+    mainDist = matches[numPairs - 1];
-+    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
-+    {
-+      if (!ChangePair(matches[numPairs - 3], mainDist))
-+        break;
-+      numPairs -= 2;
-+      mainLen = matches[numPairs - 2];
-+      mainDist = matches[numPairs - 1];
-+    }
-+    if (mainLen == 2 && mainDist >= 0x80)
-+      mainLen = 1;
-+  }
-+
-+  if (repLen >= 2 && (
-+        (repLen + 1 >= mainLen) ||
-+        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
-+        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
-+  {
-+    *backRes = repIndex;
-+    MovePos(p, repLen - 1);
-+    return repLen;
-+  }
-+  
-+  if (mainLen < 2 || numAvail <= 2)
-+    return 1;
-+
-+  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
-+  if (p->longestMatchLength >= 2)
-+  {
-+    UInt32 newDistance = matches[p->numPairs - 1];
-+    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
-+        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
-+        (p->longestMatchLength > mainLen + 1) ||
-+        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
-+      return 1;
-+  }
-+  
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len, limit;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    limit = mainLen - 1;
-+    for (len = 2; len < limit && data[len] == data2[len]; len++);
-+    if (len >= limit)
-+      return 1;
-+  }
-+  *backRes = mainDist + LZMA_NUM_REPS;
-+  MovePos(p, mainLen - 2);
-+  return mainLen;
-+}
-+
-+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
-+{
-+  UInt32 len;
-+  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+  p->state = kMatchNextStates[p->state];
-+  len = LZMA_MATCH_LEN_MIN;
-+  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
-+  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
-+  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
-+}
-+
-+static SRes CheckErrors(CLzmaEnc *p)
-+{
-+  if (p->result != SZ_OK)
-+    return p->result;
-+  if (p->rc.res != SZ_OK)
-+    p->result = SZ_ERROR_WRITE;
-+  if (p->matchFinderBase.result != SZ_OK)
-+    p->result = SZ_ERROR_READ;
-+  if (p->result != SZ_OK)
-+    p->finished = True;
-+  return p->result;
-+}
-+
-+static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
-+{
-+  /* ReleaseMFStream(); */
-+  p->finished = True;
-+  if (p->writeEndMark)
-+    WriteEndMarker(p, nowPos & p->pbMask);
-+  RangeEnc_FlushData(&p->rc);
-+  RangeEnc_FlushStream(&p->rc);
-+  return CheckErrors(p);
-+}
-+
-+static void FillAlignPrices(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < kAlignTableSize; i++)
-+    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
-+  p->alignPriceCount = 0;
-+}
-+
-+static void FillDistancesPrices(CLzmaEnc *p)
-+{
-+  UInt32 tempPrices[kNumFullDistances];
-+  UInt32 i, lenToPosState;
-+  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
-+  {
-+    UInt32 posSlot = GetPosSlot1(i);
-+    UInt32 footerBits = ((posSlot >> 1) - 1);
-+    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
-+  }
-+
-+  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
-+  {
-+    UInt32 posSlot;
-+    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
-+    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
-+    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
-+    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
-+
-+    {
-+      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
-+      UInt32 i;
-+      for (i = 0; i < kStartPosModelIndex; i++)
-+        distancesPrices[i] = posSlotPrices[i];
-+      for (; i < kNumFullDistances; i++)
-+        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
-+    }
-+  }
-+  p->matchPriceCount = 0;
-+}
-+
-+void LzmaEnc_Construct(CLzmaEnc *p)
-+{
-+  RangeEnc_Construct(&p->rc);
-+  MatchFinder_Construct(&p->matchFinderBase);
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Construct(&p->matchFinderMt);
-+  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
-+  #endif
-+
-+  {
-+    CLzmaEncProps props;
-+    LzmaEncProps_Init(&props);
-+    LzmaEnc_SetProps(p, &props);
-+  }
-+
-+  #ifndef LZMA_LOG_BSR
-+  LzmaEnc_FastPosInit(p->g_FastPos);
-+  #endif
-+
-+  LzmaEnc_InitPriceTables(p->ProbPrices);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
-+{
-+  void *p;
-+  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
-+  if (p != 0)
-+    LzmaEnc_Construct((CLzmaEnc *)p);
-+  return p;
-+}
-+
-+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->litProbs);
-+  alloc->Free(alloc, p->saveState.litProbs);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-+  #endif
-+  MatchFinder_Free(&p->matchFinderBase, allocBig);
-+  LzmaEnc_FreeLits(p, alloc);
-+  RangeEnc_Free(&p->rc, alloc);
-+}
-+
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
-+  alloc->Free(alloc, p);
-+}
-+
-+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
-+{
-+  UInt32 nowPos32, startPos32;
-+  if (p->needInit)
-+  {
-+    p->matchFinder.Init(p->matchFinderObj);
-+    p->needInit = 0;
-+  }
-+
-+  if (p->finished)
-+    return p->result;
-+  RINOK(CheckErrors(p));
-+
-+  nowPos32 = (UInt32)p->nowPos64;
-+  startPos32 = nowPos32;
-+
-+  if (p->nowPos64 == 0)
-+  {
-+    UInt32 numPairs;
-+    Byte curByte;
-+    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+      return Flush(p, nowPos32);
-+    ReadMatchDistances(p, &numPairs);
-+    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
-+    p->state = kLiteralNextStates[p->state];
-+    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
-+    LitEnc_Encode(&p->rc, p->litProbs, curByte);
-+    p->additionalOffset--;
-+    nowPos32++;
-+  }
-+
-+  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
-+  for (;;)
-+  {
-+    UInt32 pos, len, posState;
-+
-+    if (p->fastMode)
-+      len = GetOptimumFast(p, &pos);
-+    else
-+      len = GetOptimum(p, nowPos32, &pos);
-+
-+    #ifdef SHOW_STAT2
-+    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
-+    #endif
-+
-+    posState = nowPos32 & p->pbMask;
-+    if (len == 1 && pos == (UInt32)-1)
-+    {
-+      Byte curByte;
-+      CLzmaProb *probs;
-+      const Byte *data;
-+
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
-+      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+      curByte = *data;
-+      probs = LIT_PROBS(nowPos32, *(data - 1));
-+      if (IsCharState(p->state))
-+        LitEnc_Encode(&p->rc, probs, curByte);
-+      else
-+        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
-+      p->state = kLiteralNextStates[p->state];
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
-+        if (pos == 0)
-+        {
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
-+          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
-+        }
-+        else
-+        {
-+          UInt32 distance = p->reps[pos];
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
-+          if (pos == 1)
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
-+          else
-+          {
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
-+            if (pos == 3)
-+              p->reps[3] = p->reps[2];
-+            p->reps[2] = p->reps[1];
-+          }
-+          p->reps[1] = p->reps[0];
-+          p->reps[0] = distance;
-+        }
-+        if (len == 1)
-+          p->state = kShortRepNextStates[p->state];
-+        else
-+        {
-+          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+          p->state = kRepNextStates[p->state];
-+        }
-+      }
-+      else
-+      {
-+        UInt32 posSlot;
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+        p->state = kMatchNextStates[p->state];
-+        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+        pos -= LZMA_NUM_REPS;
-+        GetPosSlot(pos, posSlot);
-+        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
-+        
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          UInt32 footerBits = ((posSlot >> 1) - 1);
-+          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+          UInt32 posReduced = pos - base;
-+
-+          if (posSlot < kEndPosModelIndex)
-+            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
-+          else
-+          {
-+            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
-+            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
-+            p->alignPriceCount++;
-+          }
-+        }
-+        p->reps[3] = p->reps[2];
-+        p->reps[2] = p->reps[1];
-+        p->reps[1] = p->reps[0];
-+        p->reps[0] = pos;
-+        p->matchPriceCount++;
-+      }
-+    }
-+    p->additionalOffset -= len;
-+    nowPos32 += len;
-+    if (p->additionalOffset == 0)
-+    {
-+      UInt32 processed;
-+      if (!p->fastMode)
-+      {
-+        if (p->matchPriceCount >= (1 << 7))
-+          FillDistancesPrices(p);
-+        if (p->alignPriceCount >= kAlignTableSize)
-+          FillAlignPrices(p);
-+      }
-+      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+        break;
-+      processed = nowPos32 - startPos32;
-+      if (useLimits)
-+      {
-+        if (processed + kNumOpts + 300 >= maxUnpackSize ||
-+            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
-+          break;
-+      }
-+      else if (processed >= (1 << 15))
-+      {
-+        p->nowPos64 += nowPos32 - startPos32;
-+        return CheckErrors(p);
-+      }
-+    }
-+  }
-+  p->nowPos64 += nowPos32 - startPos32;
-+  return Flush(p, nowPos32);
-+}
-+
-+#define kBigHashDicLimit ((UInt32)1 << 24)
-+
-+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 beforeSize = kNumOpts;
-+  Bool btMode;
-+  if (!RangeEnc_Alloc(&p->rc, alloc))
-+    return SZ_ERROR_MEM;
-+  btMode = (p->matchFinderBase.btMode != 0);
-+  #ifndef _7ZIP_ST
-+  p->mtMode = (p->multiThread && !p->fastMode && btMode);
-+  #endif
-+
-+  {
-+    unsigned lclp = p->lc + p->lp;
-+    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
-+    {
-+      LzmaEnc_FreeLits(p, alloc);
-+      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      if (p->litProbs == 0 || p->saveState.litProbs == 0)
-+      {
-+        LzmaEnc_FreeLits(p, alloc);
-+        return SZ_ERROR_MEM;
-+      }
-+      p->lclp = lclp;
-+    }
-+  }
-+
-+  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
-+
-+  if (beforeSize + p->dictSize < keepWindowSize)
-+    beforeSize = keepWindowSize - p->dictSize;
-+
-+  #ifndef _7ZIP_ST
-+  if (p->mtMode)
-+  {
-+    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
-+    p->matchFinderObj = &p->matchFinderMt;
-+    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
-+  }
-+  else
-+  #endif
-+  {
-+    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
-+      return SZ_ERROR_MEM;
-+    p->matchFinderObj = &p->matchFinderBase;
-+    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
-+  }
-+  return SZ_OK;
-+}
-+
-+void LzmaEnc_Init(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  p->state = 0;
-+  for (i = 0 ; i < LZMA_NUM_REPS; i++)
-+    p->reps[i] = 0;
-+
-+  RangeEnc_Init(&p->rc);
-+
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    UInt32 j;
-+    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
-+    {
-+      p->isMatch[i][j] = kProbInitValue;
-+      p->isRep0Long[i][j] = kProbInitValue;
-+    }
-+    p->isRep[i] = kProbInitValue;
-+    p->isRepG0[i] = kProbInitValue;
-+    p->isRepG1[i] = kProbInitValue;
-+    p->isRepG2[i] = kProbInitValue;
-+  }
-+
-+  {
-+    UInt32 num = 0x300 << (p->lp + p->lc);
-+    for (i = 0; i < num; i++)
-+      p->litProbs[i] = kProbInitValue;
-+  }
-+
-+  {
-+    for (i = 0; i < kNumLenToPosStates; i++)
-+    {
-+      CLzmaProb *probs = p->posSlotEncoder[i];
-+      UInt32 j;
-+      for (j = 0; j < (1 << kNumPosSlotBits); j++)
-+        probs[j] = kProbInitValue;
-+    }
-+  }
-+  {
-+    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
-+      p->posEncoders[i] = kProbInitValue;
-+  }
-+
-+  LenEnc_Init(&p->lenEnc.p);
-+  LenEnc_Init(&p->repLenEnc.p);
-+
-+  for (i = 0; i < (1 << kNumAlignBits); i++)
-+    p->posAlignEncoder[i] = kProbInitValue;
-+
-+  p->optimumEndIndex = 0;
-+  p->optimumCurrentIndex = 0;
-+  p->additionalOffset = 0;
-+
-+  p->pbMask = (1 << p->pb) - 1;
-+  p->lpMask = (1 << p->lp) - 1;
-+}
-+
-+void LzmaEnc_InitPrices(CLzmaEnc *p)
-+{
-+  if (!p->fastMode)
-+  {
-+    FillDistancesPrices(p);
-+    FillAlignPrices(p);
-+  }
-+
-+  p->lenEnc.tableSize =
-+  p->repLenEnc.tableSize =
-+      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
-+  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
-+  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
-+}
-+
-+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 i;
-+  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
-+    if (p->dictSize <= ((UInt32)1 << i))
-+      break;
-+  p->distTableSize = i * 2;
-+
-+  p->finished = False;
-+  p->result = SZ_OK;
-+  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
-+  LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  p->nowPos64 = 0;
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  p->rc.outStream = outStream;
-+  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
-+}
-+
-+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-+    ISeqInStream *inStream, UInt32 keepWindowSize,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
-+{
-+  p->matchFinderBase.directInput = 1;
-+  p->matchFinderBase.bufferBase = (Byte *)src;
-+  p->matchFinderBase.directInputRem = srcLen;
-+}
-+
-+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+  p->needInit = 1;
-+
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+void LzmaEnc_Finish(CLzmaEncHandle pp)
-+{
-+  #ifndef _7ZIP_ST
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  if (p->mtMode)
-+    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
-+  #else
-+  pp = pp;
-+  #endif
-+}
-+
-+typedef struct
-+{
-+  ISeqOutStream funcTable;
-+  Byte *data;
-+  SizeT rem;
-+  Bool overflow;
-+} CSeqOutStreamBuf;
-+
-+static size_t MyWrite(void *pp, const void *data, size_t size)
-+{
-+  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
-+  if (p->rem < size)
-+  {
-+    size = p->rem;
-+    p->overflow = True;
-+  }
-+  memcpy(p->data, data, size);
-+  p->rem -= size;
-+  p->data += size;
-+  return size;
-+}
-+
-+
-+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+}
-+
-+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+}
-+
-+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-+    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  UInt64 nowPos64;
-+  SRes res;
-+  CSeqOutStreamBuf outStream;
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = False;
-+  p->finished = False;
-+  p->result = SZ_OK;
-+
-+  if (reInit)
-+    LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  nowPos64 = p->nowPos64;
-+  RangeEnc_Init(&p->rc);
-+  p->rc.outStream = &outStream.funcTable;
-+
-+  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
-+  
-+  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+
-+  return res;
-+}
-+
-+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
-+{
-+  SRes res = SZ_OK;
-+
-+  #ifndef _7ZIP_ST
-+  Byte allocaDummy[0x300];
-+  int i = 0;
-+  for (i = 0; i < 16; i++)
-+    allocaDummy[i] = (Byte)i;
-+  #endif
-+
-+  for (;;)
-+  {
-+    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
-+    if (res != SZ_OK || p->finished != 0)
-+      break;
-+    if (progress != 0)
-+    {
-+      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
-+      if (res != SZ_OK)
-+      {
-+        res = SZ_ERROR_PROGRESS;
-+        break;
-+      }
-+    }
-+  }
-+  LzmaEnc_Finish(p);
-+  return res;
-+}
-+
-+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-+  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
-+}
-+
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  int i;
-+  UInt32 dictSize = p->dictSize;
-+  if (*size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_PARAM;
-+  *size = LZMA_PROPS_SIZE;
-+  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
-+
-+  for (i = 11; i <= 30; i++)
-+  {
-+    if (dictSize <= ((UInt32)2 << i))
-+    {
-+      dictSize = (2 << i);
-+      break;
-+    }
-+    if (dictSize <= ((UInt32)3 << i))
-+    {
-+      dictSize = (3 << i);
-+      break;
-+    }
-+  }
-+
-+  for (i = 0; i < 4; i++)
-+    props[1 + i] = (Byte)(dictSize >> (8 * i));
-+  return SZ_OK;
-+}
-+
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  SRes res;
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+
-+  CSeqOutStreamBuf outStream;
-+
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = writeEndMark;
-+
-+  p->rc.outStream = &outStream.funcTable;
-+  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
-+  if (res == SZ_OK)
-+    res = LzmaEnc_Encode2(p, progress);
-+
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+  return res;
-+}
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-+  SRes res;
-+  if (p == 0)
-+    return SZ_ERROR_MEM;
-+
-+  res = LzmaEnc_SetProps(p, props);
-+  if (res == SZ_OK)
-+  {
-+    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-+    if (res == SZ_OK)
-+      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-+          writeEndMark, progress, alloc, allocBig);
-+  }
-+
-+  LzmaEnc_Destroy(p, alloc, allocBig);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/Makefile
-@@ -0,0 +1,7 @@
-+lzma_compress-objs := LzFind.o LzmaEnc.o
-+lzma_decompress-objs := LzmaDec.o
-+
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
-+
-+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/pending-4.19/532-jffs2_eofdetect.patch b/target/linux/generic/pending-4.19/532-jffs2_eofdetect.patch
deleted file mode 100644
index e9952c6d84..0000000000
--- a/target/linux/generic/pending-4.19/532-jffs2_eofdetect.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fs: jffs2: EOF marker
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/jffs2/build.c | 10 ++++++++++
- fs/jffs2/scan.c  | 21 +++++++++++++++++++--
- 2 files changed, 29 insertions(+), 2 deletions(-)
-
---- a/fs/jffs2/build.c
-+++ b/fs/jffs2/build.c
-@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct
- 	dbg_fsbuild("scanned flash completely\n");
- 	jffs2_dbg_dump_block_lists_nolock(c);
- 
-+	if (c->flags & (1 << 7)) {
-+		printk("%s(): unlocking the mtd device... ", __func__);
-+		mtd_unlock(c->mtd, 0, c->mtd->size);
-+		printk("done.\n");
-+
-+		printk("%s(): erasing all blocks after the end marker... ", __func__);
-+		jffs2_erase_pending_blocks(c, -1);
-+		printk("done.\n");
-+	}
-+
- 	dbg_fsbuild("pass 1 starting\n");
- 	c->flags |= JFFS2_SB_FLAG_BUILDING;
- 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
---- a/fs/jffs2/scan.c
-+++ b/fs/jffs2/scan.c
-@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
- 		/* reset summary info for next eraseblock scan */
- 		jffs2_sum_reset_collected(s);
- 
--		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
--						buf_size, s);
-+		if (c->flags & (1 << 7)) {
-+			if (mtd_block_isbad(c->mtd, jeb->offset))
-+				ret = BLK_STATE_BADBLOCK;
-+			else
-+				ret = BLK_STATE_ALLFF;
-+		} else
-+			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-+							buf_size, s);
- 
- 		if (ret < 0)
- 			goto out;
-@@ -561,6 +567,17 @@ full_scan:
- 			return err;
- 	}
- 
-+	if ((buf[0] == 0xde) &&
-+		(buf[1] == 0xad) &&
-+		(buf[2] == 0xc0) &&
-+		(buf[3] == 0xde)) {
-+		/* end of filesystem. erase everything after this point */
-+		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
-+		c->flags |= (1 << 7);
-+
-+		return BLK_STATE_ALLFF;
-+	}
-+
- 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
- 	ofs = 0;
- 	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
diff --git a/target/linux/generic/pending-4.19/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch b/target/linux/generic/pending-4.19/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch
deleted file mode 100644
index 02c9b4c0fa..0000000000
--- a/target/linux/generic/pending-4.19/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 93c33e6a7f3b0aef99d02252e6232a3d8b80f2d5 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 21 Jan 2018 15:47:50 +0100
-Subject: ubifs: Add option to create UBI FS version 4 on empty UBI volume
-
-Instead of creating an ubifs file system with format version 5 by
-default on empty UBI volumes add a compile option to create an older ubi
-with file system format version 4 instated. This allows it to be mount
-as a volume on kernel versions < 4.10, which does not support format
-version 5.
-We saw that some people can not access their older data when they
-downgraded from kernel 4.14 to kernel 4.9 to prevent this this option
-would help.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- fs/ubifs/Kconfig | 13 +++++++++++++
- fs/ubifs/sb.c    |  6 ++++++
- 2 files changed, 19 insertions(+)
-
---- a/fs/ubifs/Kconfig
-+++ b/fs/ubifs/Kconfig
-@@ -85,3 +85,16 @@ config UBIFS_FS_SECURITY
- 	  the extended attribute support in advance.
- 
- 	  If you are not using a security module, say N.
-+
-+config UBIFS_FS_FORMAT4
-+	bool "Use file system format version 4 for new file systems"
-+	depends on UBIFS_FS
-+	help
-+	  Instead of creating new file systems with the new ubifs file
-+	  system version 5, use the old format version 4 for implicitly
-+	  by the driver created file systems on an empty UBI volume. This
-+	  makes it possible to  mount these file systems also with kernel
-+	  versions before 4.10. The driver will still support file system
-+	  format version 5 for ubifs file systems created with version 5.
-+
-+	  If you are unsure, say N.
---- a/fs/ubifs/sb.c
-+++ b/fs/ubifs/sb.c
-@@ -176,7 +176,9 @@ static int create_default_filesystem(str
- 	tmp64 = (long long)max_buds * c->leb_size;
- 	if (big_lpt)
- 		sup_flags |= UBIFS_FLG_BIGLPT;
-+#ifndef CONFIG_UBIFS_FS_FORMAT4
- 	sup_flags |= UBIFS_FLG_DOUBLE_HASH;
-+#endif
- 
- 	sup->ch.node_type  = UBIFS_SB_NODE;
- 	sup->key_hash      = UBIFS_KEY_HASH_R5;
-@@ -192,7 +194,11 @@ static int create_default_filesystem(str
- 	sup->jhead_cnt     = cpu_to_le32(DEFAULT_JHEADS_CNT);
- 	sup->fanout        = cpu_to_le32(DEFAULT_FANOUT);
- 	sup->lsave_cnt     = cpu_to_le32(c->lsave_cnt);
-+#ifdef CONFIG_UBIFS_FS_FORMAT4
-+	sup->fmt_version   = cpu_to_le32(4);
-+#else
- 	sup->fmt_version   = cpu_to_le32(UBIFS_FORMAT_VERSION);
-+#endif
- 	sup->time_gran     = cpu_to_le32(DEFAULT_TIME_GRAN);
- 	if (c->mount_opts.override_compr)
- 		sup->default_compr = cpu_to_le16(c->mount_opts.compr_type);
diff --git a/target/linux/generic/pending-4.19/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-4.19/600-netfilter_conntrack_flush.patch
deleted file mode 100644
index fa32f88e17..0000000000
--- a/target/linux/generic/pending-4.19/600-netfilter_conntrack_flush.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: add support for flushing conntrack via /proc
-
-lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++-
- 1 file changed, 58 insertions(+), 1 deletion(-)
-
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -9,6 +9,7 @@
- #include <linux/percpu.h>
- #include <linux/netdevice.h>
- #include <linux/security.h>
-+#include <linux/inet.h>
- #include <net/net_namespace.h>
- #ifdef CONFIG_SYSCTL
- #include <linux/sysctl.h>
-@@ -433,6 +434,56 @@ static int ct_cpu_seq_show(struct seq_fi
- 	return 0;
- }
- 
-+struct kill_request {
-+	u16 family;
-+	union nf_inet_addr addr;
-+};
-+
-+static int kill_matching(struct nf_conn *i, void *data)
-+{
-+	struct kill_request *kr = data;
-+	struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+	struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+	if (!kr->family)
-+		return 1;
-+
-+	if (t1->src.l3num != kr->family)
-+		return 0;
-+
-+	return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
-+}
-+
-+static int ct_file_write(struct file *file, char *buf, size_t count)
-+{
-+	struct seq_file *seq = file->private_data;
-+	struct net *net = seq_file_net(seq);
-+	struct kill_request kr = { };
-+
-+	if (count == 0)
-+		return 0;
-+
-+	if (count >= INET6_ADDRSTRLEN)
-+		count = INET6_ADDRSTRLEN - 1;
-+
-+	if (strnchr(buf, count, ':')) {
-+		kr.family = AF_INET6;
-+		if (!in6_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	} else if (strnchr(buf, count, '.')) {
-+		kr.family = AF_INET;
-+		if (!in4_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	}
-+
-+	nf_ct_iterate_cleanup_net(net, kill_matching, &kr, 0, 0);
-+
-+	return 0;
-+}
-+
- static const struct seq_operations ct_cpu_seq_ops = {
- 	.start	= ct_cpu_seq_start,
- 	.next	= ct_cpu_seq_next,
-@@ -446,8 +497,9 @@ static int nf_conntrack_standalone_init_
- 	kuid_t root_uid;
- 	kgid_t root_gid;
- 
--	pde = proc_create_net("nf_conntrack", 0440, net->proc_net, &ct_seq_ops,
--			sizeof(struct ct_iter_state));
-+	pde = proc_create_net_data_write("nf_conntrack", 0440, net->proc_net,
-+					 &ct_seq_ops, &ct_file_write,
-+					 sizeof(struct ct_iter_state), NULL);
- 	if (!pde)
- 		goto out_nf_conntrack;
- 
diff --git a/target/linux/generic/pending-4.19/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-4.19/610-netfilter_match_bypass_default_checks.patch
deleted file mode 100644
index 1691146825..0000000000
--- a/target/linux/generic/pending-4.19/610-netfilter_match_bypass_default_checks.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/netfilter_ipv4/ip_tables.h |  1 +
- net/ipv4/netfilter/ip_tables.c                | 37 +++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
-@@ -89,6 +89,7 @@ struct ipt_ip {
- #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
- #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
- #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
- 
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -53,6 +53,9 @@ ip_packet_match(const struct iphdr *ip,
- {
- 	unsigned long ret;
- 
-+	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+		return true;
-+
- 	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
- 	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-@@ -83,6 +86,29 @@ ip_packet_match(const struct iphdr *ip,
- 	return true;
- }
- 
-+static void
-+ip_checkdefault(struct ipt_ip *ip)
-+{
-+	static const char iface_mask[IFNAMSIZ] = {};
-+
-+	if (ip->invflags || ip->flags & IPT_F_FRAG)
-+		return;
-+
-+	if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (ip->smsk.s_addr || ip->dmsk.s_addr)
-+		return;
-+
-+	if (ip->proto)
-+		return;
-+
-+	ip->flags |= IPT_F_NO_DEF_MATCH;
-+}
-+
- static bool
- ip_checkentry(const struct ipt_ip *ip)
- {
-@@ -527,6 +553,8 @@ find_check_entry(struct ipt_entry *e, st
- 	struct xt_mtchk_param mtpar;
- 	struct xt_entry_match *ematch;
- 
-+	ip_checkdefault(&e->ip);
-+
- 	if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
- 		return -ENOMEM;
- 
-@@ -821,6 +849,7 @@ copy_entries_to_user(unsigned int total_
- 	const struct xt_table_info *private = table->private;
- 	int ret = 0;
- 	const void *loc_cpu_entry;
-+	u8 flags;
- 
- 	counters = alloc_counters(table);
- 	if (IS_ERR(counters))
-@@ -848,6 +877,14 @@ copy_entries_to_user(unsigned int total_
- 			goto free_counters;
- 		}
- 
-+		flags = e->ip.flags & IPT_F_MASK;
-+		if (copy_to_user(userptr + off
-+				 + offsetof(struct ipt_entry, ip.flags),
-+				 &flags, sizeof(flags)) != 0) {
-+			ret = -EFAULT;
-+			goto free_counters;
-+		}
-+
- 		for (i = sizeof(struct ipt_entry);
- 		     i < e->target_offset;
- 		     i += m->u.match_size) {
-@@ -1228,12 +1265,15 @@ compat_copy_entry_to_user(struct ipt_ent
- 	compat_uint_t origsize;
- 	const struct xt_entry_match *ematch;
- 	int ret = 0;
-+	u8 flags = e->ip.flags & IPT_F_MASK;
- 
- 	origsize = *size;
- 	ce = *dstptr;
- 	if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
- 	    copy_to_user(&ce->counters, &counters[i],
--	    sizeof(counters[i])) != 0)
-+	    sizeof(counters[i])) != 0 ||
-+	    copy_to_user(&ce->ip.flags, &flags,
-+	    sizeof(flags)) != 0)
- 		return -EFAULT;
- 
- 	*dstptr += sizeof(struct compat_ipt_entry);
diff --git a/target/linux/generic/pending-4.19/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-4.19/611-netfilter_match_bypass_default_table.patch
deleted file mode 100644
index ba976b0751..0000000000
--- a/target/linux/generic/pending-4.19/611-netfilter_match_bypass_default_table.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: match bypass default table
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++-----------
- 1 file changed, 58 insertions(+), 21 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -249,6 +249,33 @@ struct ipt_entry *ipt_next_entry(const s
- 	return (void *)entry + entry->next_offset;
- }
- 
-+static bool
-+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
-+{
-+	struct xt_entry_target *t;
-+	struct xt_standard_target *st;
-+
-+	if (e->target_offset != sizeof(struct ipt_entry))
-+		return false;
-+
-+	if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
-+		return false;
-+
-+	t = ipt_get_target(e);
-+	if (t->u.kernel.target->target)
-+		return false;
-+
-+	st = (struct xt_standard_target *) t;
-+	if (st->verdict == XT_RETURN)
-+		return false;
-+
-+	if (st->verdict >= 0)
-+		return false;
-+
-+	*verdict = (unsigned)(-st->verdict) - 1;
-+	return true;
-+}
-+
- /* Returns one of the generic firewall policies, like NF_ACCEPT. */
- unsigned int
- ipt_do_table(struct sk_buff *skb,
-@@ -269,27 +296,28 @@ ipt_do_table(struct sk_buff *skb,
- 	unsigned int addend;
- 
- 	/* Initialization */
-+	WARN_ON(!(table->valid_hooks & (1 << hook)));
-+	local_bh_disable();
-+	private = READ_ONCE(table->private); /* Address dependency. */
-+	cpu        = smp_processor_id();
-+	table_base = private->entries;
-+
-+	e = get_entry(table_base, private->hook_entry[hook]);
-+	if (ipt_handle_default_rule(e, &verdict)) {
-+		struct xt_counters *counter;
-+
-+		counter = xt_get_this_cpu_counter(&e->counters);
-+		ADD_COUNTER(*counter, skb->len, 1);
-+		local_bh_enable();
-+		return verdict;
-+	}
-+
- 	stackidx = 0;
- 	ip = ip_hdr(skb);
- 	indev = state->in ? state->in->name : nulldevname;
- 	outdev = state->out ? state->out->name : nulldevname;
--	/* We handle fragments by dealing with the first fragment as
--	 * if it was a normal packet.  All other fragments are treated
--	 * normally, except that they will NEVER match rules that ask
--	 * things we don't know, ie. tcp syn flag or ports).  If the
--	 * rule is also a fragment-specific rule, non-fragments won't
--	 * match it. */
--	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
--	acpar.thoff   = ip_hdrlen(skb);
--	acpar.hotdrop = false;
--	acpar.state   = state;
- 
--	WARN_ON(!(table->valid_hooks & (1 << hook)));
--	local_bh_disable();
- 	addend = xt_write_recseq_begin();
--	private = READ_ONCE(table->private); /* Address dependency. */
--	cpu        = smp_processor_id();
--	table_base = private->entries;
- 	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
- 
- 	/* Switch to alternate jumpstack if we're being invoked via TEE.
-@@ -302,7 +330,16 @@ ipt_do_table(struct sk_buff *skb,
- 	if (static_key_false(&xt_tee_enabled))
- 		jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated);
- 
--	e = get_entry(table_base, private->hook_entry[hook]);
-+	/* We handle fragments by dealing with the first fragment as
-+	 * if it was a normal packet.  All other fragments are treated
-+	 * normally, except that they will NEVER match rules that ask
-+	 * things we don't know, ie. tcp syn flag or ports).  If the
-+	 * rule is also a fragment-specific rule, non-fragments won't
-+	 * match it. */
-+	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
-+	acpar.thoff   = ip_hdrlen(skb);
-+	acpar.hotdrop = false;
-+	acpar.state   = state;
- 
- 	do {
- 		const struct xt_entry_target *t;
diff --git a/target/linux/generic/pending-4.19/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-4.19/612-netfilter_match_reduce_memory_access.patch
deleted file mode 100644
index cd6fcf8e74..0000000000
--- a/target/linux/generic/pending-4.19/612-netfilter_match_reduce_memory_access.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: reduce match memory access
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -56,9 +56,9 @@ ip_packet_match(const struct iphdr *ip,
- 	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
- 		return true;
- 
--	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
-+	if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr &&
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
--	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-+	    NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr &&
- 		    (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr))
- 		return false;
- 
diff --git a/target/linux/generic/pending-4.19/613-netfilter_optional_tcp_window_check.patch b/target/linux/generic/pending-4.19/613-netfilter_optional_tcp_window_check.patch
deleted file mode 100644
index 2bc48f87cf..0000000000
--- a/target/linux/generic/pending-4.19/613-netfilter_optional_tcp_window_check.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: optional tcp window check
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_proto_tcp.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -34,6 +34,9 @@
- #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
- #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
- 
-+/* Do not check the TCP window for incoming packets  */
-+static int nf_ct_tcp_no_window_check __read_mostly = 1;
-+
- /* "Be conservative in what you do,
-     be liberal in what you accept from others."
-     If it's non-zero, we mark only out of window RST segments as INVALID. */
-@@ -483,6 +486,9 @@ static bool tcp_in_window(const struct n
- 	s32 receiver_offset;
- 	bool res, in_recv_win;
- 
-+	if (nf_ct_tcp_no_window_check)
-+		return true;
-+
- 	/*
- 	 * Get the required data from the packet.
- 	 */
-@@ -1057,7 +1063,7 @@ static int tcp_packet(struct nf_conn *ct
- 		 IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
- 		 timeouts[new_state] > timeouts[TCP_CONNTRACK_UNACK])
- 		timeout = timeouts[TCP_CONNTRACK_UNACK];
--	else if (ct->proto.tcp.last_win == 0 &&
-+	else if (!nf_ct_tcp_no_window_check && ct->proto.tcp.last_win == 0 &&
- 		 timeouts[new_state] > timeouts[TCP_CONNTRACK_RETRANS])
- 		timeout = timeouts[TCP_CONNTRACK_RETRANS];
- 	else
-@@ -1506,6 +1512,13 @@ static struct ctl_table tcp_sysctl_table
- 		.mode		= 0644,
- 		.proc_handler	= proc_dointvec,
- 	},
-+	{
-+		.procname       = "nf_conntrack_tcp_no_window_check",
-+		.data           = &nf_ct_tcp_no_window_check,
-+		.maxlen         = sizeof(unsigned int),
-+		.mode           = 0644,
-+		.proc_handler   = proc_dointvec,
-+	},
- 	{ }
- };
- #endif /* CONFIG_SYSCTL */
diff --git a/target/linux/generic/pending-4.19/616-net_optimize_xfrm_calls.patch b/target/linux/generic/pending-4.19/616-net_optimize_xfrm_calls.patch
deleted file mode 100644
index 6a5801027c..0000000000
--- a/target/linux/generic/pending-4.19/616-net_optimize_xfrm_calls.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a small xfrm related performance optimization
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_nat_core.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/net/netfilter/nf_nat_core.c
-+++ b/net/netfilter/nf_nat_core.c
-@@ -110,6 +110,9 @@ int nf_xfrm_me_harder(struct net *net, s
- 	struct sock *sk = skb->sk;
- 	int err;
- 
-+	if (skb->dev && !dev_net(skb->dev)->xfrm.policy_count[XFRM_POLICY_OUT])
-+		return 0;
-+
- 	err = xfrm_decode_session(skb, &fl, family);
- 	if (err < 0)
- 		return err;
diff --git a/target/linux/generic/pending-4.19/620-net_sched-codel-do-not-defer-queue-length-update.patch b/target/linux/generic/pending-4.19/620-net_sched-codel-do-not-defer-queue-length-update.patch
deleted file mode 100644
index 457c812841..0000000000
--- a/target/linux/generic/pending-4.19/620-net_sched-codel-do-not-defer-queue-length-update.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Date: Mon, 21 Aug 2017 11:14:14 +0300
-Subject: [PATCH] net_sched/codel: do not defer queue length update
-
-When codel wants to drop last packet in ->dequeue() it cannot call
-qdisc_tree_reduce_backlog() right away - it will notify parent qdisc
-about zero qlen and HTB/HFSC will deactivate class. The same class will
-be deactivated second time by caller of ->dequeue(). Currently codel and
-fq_codel defer update. This triggers warning in HFSC when it's qlen != 0
-but there is no active classes.
-
-This patch update parent queue length immediately: just temporary increase
-qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation
-if we have skb to return.
-
-This might open another problem in HFSC - now operation peek could fail and
-deactivate parent class.
-
-Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581
----
-
---- a/net/sched/sch_codel.c
-+++ b/net/sched/sch_codel.c
-@@ -95,11 +95,17 @@ static struct sk_buff *codel_qdisc_deque
- 			    &q->stats, qdisc_pkt_len, codel_get_enqueue_time,
- 			    drop_func, dequeue_func);
- 
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
- 	 */
--	if (q->stats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len);
-+	if (q->stats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->stats.drop_count,
-+					  q->stats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
- 		q->stats.drop_count = 0;
- 		q->stats.drop_len = 0;
- 	}
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -317,6 +317,21 @@ begin:
- 	flow->dropped += q->cstats.drop_count - prev_drop_count;
- 	flow->dropped += q->cstats.ecn_mark - prev_ecn_mark;
- 
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
-+	 */
-+	if (q->cstats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
-+					  q->cstats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
-+		q->cstats.drop_count = 0;
-+		q->cstats.drop_len = 0;
-+	}
-+
- 	if (!skb) {
- 		/* force a pass through old_flows to prevent starvation */
- 		if ((head == &q->new_flows) && !list_empty(&q->old_flows))
-@@ -327,15 +342,6 @@ begin:
- 	}
- 	qdisc_bstats_update(sch, skb);
- 	flow->deficit -= qdisc_pkt_len(skb);
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
--	 */
--	if (q->cstats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
--					  q->cstats.drop_len);
--		q->cstats.drop_count = 0;
--		q->cstats.drop_len = 0;
--	}
- 	return skb;
- }
- 
diff --git a/target/linux/generic/pending-4.19/630-packet_socket_type.patch b/target/linux/generic/pending-4.19/630-packet_socket_type.patch
deleted file mode 100644
index 333d4f5739..0000000000
--- a/target/linux/generic/pending-4.19/630-packet_socket_type.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: add an optimization for dealing with raw sockets
-
-lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/if_packet.h |  3 +++
- net/packet/af_packet.c         | 34 +++++++++++++++++++++++++++-------
- net/packet/internal.h          |  1 +
- 3 files changed, 31 insertions(+), 7 deletions(-)
-
---- a/include/uapi/linux/if_packet.h
-+++ b/include/uapi/linux/if_packet.h
-@@ -32,6 +32,8 @@ struct sockaddr_ll {
- #define PACKET_KERNEL		7		/* To kernel space	*/
- /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
- #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
-+#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
-+
- 
- /* Packet socket options */
- 
-@@ -57,6 +59,7 @@ struct sockaddr_ll {
- #define PACKET_QDISC_BYPASS		20
- #define PACKET_ROLLOVER_STATS		21
- #define PACKET_FANOUT_DATA		22
-+#define PACKET_RECV_TYPE		23
- 
- #define PACKET_FANOUT_HASH		0
- #define PACKET_FANOUT_LB		1
---- a/net/packet/af_packet.c
-+++ b/net/packet/af_packet.c
-@@ -1789,6 +1789,7 @@ static int packet_rcv_spkt(struct sk_buf
- {
- 	struct sock *sk;
- 	struct sockaddr_pkt *spkt;
-+	struct packet_sock *po;
- 
- 	/*
- 	 *	When we registered the protocol we saved the socket in the data
-@@ -1796,6 +1797,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 */
- 
- 	sk = pt->af_packet_priv;
-+	po = pkt_sk(sk);
- 
- 	/*
- 	 *	Yank back the headers [hope the device set this
-@@ -1808,7 +1810,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 *	so that this procedure is noop.
- 	 */
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
- 		goto out;
- 
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -2036,12 +2038,12 @@ static int packet_rcv(struct sk_buff *sk
- 	unsigned int snaplen, res;
- 	bool is_drop_n_account = false;
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -2167,12 +2169,12 @@ static int tpacket_rcv(struct sk_buff *s
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -3237,6 +3239,7 @@ static int packet_create(struct net *net
- 	mutex_init(&po->pg_vec_lock);
- 	po->rollover = NULL;
- 	po->prot_hook.func = packet_rcv;
-+	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
- 
- 	if (sock->type == SOCK_PACKET)
- 		po->prot_hook.func = packet_rcv_spkt;
-@@ -3848,6 +3851,16 @@ packet_setsockopt(struct socket *sock, i
- 		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
- 		return 0;
- 	}
-+        case PACKET_RECV_TYPE:
-+        {
-+                unsigned int val;
-+                if (optlen != sizeof(val))
-+                        return -EINVAL;
-+                if (copy_from_user(&val, optval, sizeof(val)))
-+                        return -EFAULT;
-+                po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
-+                return 0;
-+        }
- 	default:
- 		return -ENOPROTOOPT;
- 	}
-@@ -3900,6 +3913,13 @@ static int packet_getsockopt(struct sock
- 	case PACKET_VNET_HDR:
- 		val = po->has_vnet_hdr;
- 		break;
-+	case PACKET_RECV_TYPE:
-+		if (len > sizeof(unsigned int))
-+			len = sizeof(unsigned int);
-+		val = po->pkt_type;
-+
-+		data = &val;
-+		break;
- 	case PACKET_VERSION:
- 		val = po->tp_version;
- 		break;
---- a/net/packet/internal.h
-+++ b/net/packet/internal.h
-@@ -131,6 +131,7 @@ struct packet_sock {
- 	struct net_device __rcu	*cached_dev;
- 	int			(*xmit)(struct sk_buff *skb);
- 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
-+	unsigned int		pkt_type;
- };
- 
- static struct packet_sock *pkt_sk(struct sock *sk)
diff --git a/target/linux/generic/pending-4.19/640-netfilter-nf_flow_table-add-hardware-offload-support.patch b/target/linux/generic/pending-4.19/640-netfilter-nf_flow_table-add-hardware-offload-support.patch
deleted file mode 100644
index 288a603291..0000000000
--- a/target/linux/generic/pending-4.19/640-netfilter-nf_flow_table-add-hardware-offload-support.patch
+++ /dev/null
@@ -1,564 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Thu, 11 Jan 2018 16:32:00 +0100
-Subject: [PATCH] netfilter: nf_flow_table: add hardware offload support
-
-This patch adds the infrastructure to offload flows to hardware, in case
-the nic/switch comes with built-in flow tables capabilities.
-
-If the hardware comes with no hardware flow tables or they have
-limitations in terms of features, the existing infrastructure falls back
-to the software flow table implementation.
-
-The software flow table garbage collector skips entries that resides in
-the hardware, so the hardware will be responsible for releasing this
-flow table entry too via flow_offload_dead().
-
-Hardware configuration, either to add or to delete entries, is done from
-the hardware offload workqueue, to ensure this is done from user context
-given that we may sleep when grabbing the mdio mutex.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- create mode 100644 net/netfilter/nf_flow_table_hw.c
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -918,6 +918,13 @@ struct dev_ifalias {
- 	char ifalias[];
- };
- 
-+struct flow_offload;
-+
-+enum flow_offload_type {
-+	FLOW_OFFLOAD_ADD	= 0,
-+	FLOW_OFFLOAD_DEL,
-+};
-+
- /*
-  * This structure defines the management hooks for network devices.
-  * The following hooks can be defined; unless noted otherwise, they are
-@@ -1150,6 +1157,10 @@ struct dev_ifalias {
-  * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
-  *			     u16 flags);
-  *
-+ * int (*ndo_flow_offload)(enum flow_offload_type type,
-+ *			   struct flow_offload *flow);
-+ *	Adds/deletes flow entry to/from net device flowtable.
-+ *
-  * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
-  *	Called to change device carrier. Soft-devices (like dummy, team, etc)
-  *	which do not represent real hardware may define this to allow their
-@@ -1377,6 +1388,8 @@ struct net_device_ops {
- 	int			(*ndo_bridge_dellink)(struct net_device *dev,
- 						      struct nlmsghdr *nlh,
- 						      u16 flags);
-+	int			(*ndo_flow_offload)(enum flow_offload_type type,
-+						    struct flow_offload *flow);
- 	int			(*ndo_change_carrier)(struct net_device *dev,
- 						      bool new_carrier);
- 	int			(*ndo_get_phys_port_id)(struct net_device *dev,
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -20,11 +20,17 @@ struct nf_flowtable_type {
- 	struct module			*owner;
- };
- 
-+enum nf_flowtable_flags {
-+	NF_FLOWTABLE_F_HW		= 0x1,
-+};
-+
- struct nf_flowtable {
- 	struct list_head		list;
- 	struct rhashtable		rhashtable;
- 	const struct nf_flowtable_type	*type;
-+	u32				flags;
- 	struct delayed_work		gc_work;
-+	possible_net_t			ft_net;
- };
- 
- enum flow_offload_tuple_dir {
-@@ -69,6 +75,7 @@ struct flow_offload_tuple_rhash {
- #define FLOW_OFFLOAD_DNAT	0x2
- #define FLOW_OFFLOAD_DYING	0x4
- #define FLOW_OFFLOAD_TEARDOWN	0x8
-+#define FLOW_OFFLOAD_HW		0x10
- 
- struct flow_offload {
- 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
-@@ -125,6 +132,22 @@ unsigned int nf_flow_offload_ip_hook(voi
- unsigned int nf_flow_offload_ipv6_hook(void *priv, struct sk_buff *skb,
- 				       const struct nf_hook_state *state);
- 
-+void nf_flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+			    struct nf_conn *ct);
-+void nf_flow_offload_hw_del(struct net *net, struct flow_offload *flow);
-+
-+struct nf_flow_table_hw {
-+	struct module	*owner;
-+	void		(*add)(struct net *net, struct flow_offload *flow,
-+			       struct nf_conn *ct);
-+	void		(*del)(struct net *net, struct flow_offload *flow);
-+};
-+
-+int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
-+void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
-+
-+extern struct work_struct nf_flow_offload_hw_work;
-+
- #define MODULE_ALIAS_NF_FLOWTABLE(family)	\
- 	MODULE_ALIAS("nf-flowtable-" __stringify(family))
- 
---- a/include/uapi/linux/netfilter/nf_tables.h
-+++ b/include/uapi/linux/netfilter/nf_tables.h
-@@ -1464,6 +1464,7 @@ enum nft_object_attributes {
-  * @NFTA_FLOWTABLE_HOOK: netfilter hook configuration(NLA_U32)
-  * @NFTA_FLOWTABLE_USE: number of references to this flow table (NLA_U32)
-  * @NFTA_FLOWTABLE_HANDLE: object handle (NLA_U64)
-+ * @NFTA_FLOWTABLE_FLAGS: flags (NLA_U32)
-  */
- enum nft_flowtable_attributes {
- 	NFTA_FLOWTABLE_UNSPEC,
-@@ -1473,6 +1474,7 @@ enum nft_flowtable_attributes {
- 	NFTA_FLOWTABLE_USE,
- 	NFTA_FLOWTABLE_HANDLE,
- 	NFTA_FLOWTABLE_PAD,
-+	NFTA_FLOWTABLE_FLAGS,
- 	__NFTA_FLOWTABLE_MAX
- };
- #define NFTA_FLOWTABLE_MAX	(__NFTA_FLOWTABLE_MAX - 1)
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -714,6 +714,15 @@ config NF_FLOW_TABLE
- 
- 	  To compile it as a module, choose M here.
- 
-+config NF_FLOW_TABLE_HW
-+	tristate "Netfilter flow table hardware offload module"
-+	depends on NF_FLOW_TABLE
-+	help
-+	  This option adds hardware offload support for the flow table core
-+	  infrastructure.
-+
-+	  To compile it as a module, choose M here.
-+
- config NETFILTER_XTABLES
- 	tristate "Netfilter Xtables support (required for ip_tables)"
- 	default m if NETFILTER_ADVANCED=n
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -126,6 +126,7 @@ obj-$(CONFIG_NF_FLOW_TABLE)	+= nf_flow_t
- nf_flow_table-objs := nf_flow_table_core.o nf_flow_table_ip.o
- 
- obj-$(CONFIG_NF_FLOW_TABLE_INET) += nf_flow_table_inet.o
-+obj-$(CONFIG_NF_FLOW_TABLE_HW)	+= nf_flow_table_hw.o
- 
- # generic X tables 
- obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -216,10 +216,16 @@ int flow_offload_add(struct nf_flowtable
- }
- EXPORT_SYMBOL_GPL(flow_offload_add);
- 
-+static inline bool nf_flow_in_hw(const struct flow_offload *flow)
-+{
-+	return flow->flags & FLOW_OFFLOAD_HW;
-+}
-+
- static void flow_offload_del(struct nf_flowtable *flow_table,
- 			     struct flow_offload *flow)
- {
- 	struct flow_offload_entry *e;
-+	struct net *net = read_pnet(&flow_table->ft_net);
- 
- 	rhashtable_remove_fast(&flow_table->rhashtable,
- 			       &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].node,
-@@ -234,6 +240,9 @@ static void flow_offload_del(struct nf_f
- 	if (!(flow->flags & FLOW_OFFLOAD_TEARDOWN))
- 		flow_offload_fixup_ct_state(e->ct);
- 
-+	if (nf_flow_in_hw(flow))
-+		nf_flow_offload_hw_del(net, flow);
-+
- 	flow_offload_free(flow);
- }
- 
-@@ -347,6 +356,9 @@ static int nf_flow_offload_gc_step(struc
- 		if (!teardown)
- 			nf_ct_offload_timeout(flow);
- 
-+		if (nf_flow_in_hw(flow) && !teardown)
-+			continue;
-+
- 		if (nf_flow_has_expired(flow) || teardown)
- 			flow_offload_del(flow_table, flow);
- 	}
-@@ -482,10 +494,43 @@ int nf_flow_dnat_port(const struct flow_
- }
- EXPORT_SYMBOL_GPL(nf_flow_dnat_port);
- 
-+static const struct nf_flow_table_hw __rcu *nf_flow_table_hw_hook __read_mostly;
-+
-+static int nf_flow_offload_hw_init(struct nf_flowtable *flow_table)
-+{
-+	const struct nf_flow_table_hw *offload;
-+
-+	if (!rcu_access_pointer(nf_flow_table_hw_hook))
-+		request_module("nf-flow-table-hw");
-+
-+	rcu_read_lock();
-+	offload = rcu_dereference(nf_flow_table_hw_hook);
-+	if (!offload)
-+		goto err_no_hw_offload;
-+
-+	if (!try_module_get(offload->owner))
-+		goto err_no_hw_offload;
-+
-+	rcu_read_unlock();
-+
-+	return 0;
-+
-+err_no_hw_offload:
-+	rcu_read_unlock();
-+
-+	return -EOPNOTSUPP;
-+}
-+
- int nf_flow_table_init(struct nf_flowtable *flowtable)
- {
- 	int err;
- 
-+	if (flowtable->flags & NF_FLOWTABLE_F_HW) {
-+		err = nf_flow_offload_hw_init(flowtable);
-+		if (err)
-+			return err;
-+	}
-+
- 	INIT_DEFERRABLE_WORK(&flowtable->gc_work, nf_flow_offload_work_gc);
- 
- 	err = rhashtable_init(&flowtable->rhashtable,
-@@ -523,6 +568,8 @@ static void nf_flow_table_iterate_cleanu
- {
- 	nf_flow_table_iterate(flowtable, nf_flow_table_do_cleanup, dev);
- 	flush_delayed_work(&flowtable->gc_work);
-+	if (flowtable->flags & NF_FLOWTABLE_F_HW)
-+		flush_work(&nf_flow_offload_hw_work);
- }
- 
- void nf_flow_table_cleanup(struct net *net, struct net_device *dev)
-@@ -536,6 +583,26 @@ void nf_flow_table_cleanup(struct net *n
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_cleanup);
- 
-+struct work_struct nf_flow_offload_hw_work;
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_work);
-+
-+/* Give the hardware workqueue the chance to remove entries from hardware.*/
-+static void nf_flow_offload_hw_free(struct nf_flowtable *flowtable)
-+{
-+	const struct nf_flow_table_hw *offload;
-+
-+	flush_work(&nf_flow_offload_hw_work);
-+
-+	rcu_read_lock();
-+	offload = rcu_dereference(nf_flow_table_hw_hook);
-+	if (!offload) {
-+		rcu_read_unlock();
-+		return;
-+	}
-+	module_put(offload->owner);
-+	rcu_read_unlock();
-+}
-+
- void nf_flow_table_free(struct nf_flowtable *flow_table)
- {
- 	mutex_lock(&flowtable_lock);
-@@ -545,9 +612,58 @@ void nf_flow_table_free(struct nf_flowta
- 	nf_flow_table_iterate(flow_table, nf_flow_table_do_cleanup, NULL);
- 	WARN_ON(!nf_flow_offload_gc_step(flow_table));
- 	rhashtable_destroy(&flow_table->rhashtable);
-+	if (flow_table->flags & NF_FLOWTABLE_F_HW)
-+		nf_flow_offload_hw_free(flow_table);
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_free);
- 
-+/* Must be called from user context. */
-+void nf_flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+			    struct nf_conn *ct)
-+{
-+	const struct nf_flow_table_hw *offload;
-+
-+	rcu_read_lock();
-+	offload = rcu_dereference(nf_flow_table_hw_hook);
-+	if (offload)
-+		offload->add(net, flow, ct);
-+	rcu_read_unlock();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_add);
-+
-+/* Must be called from user context. */
-+void nf_flow_offload_hw_del(struct net *net, struct flow_offload *flow)
-+{
-+	const struct nf_flow_table_hw *offload;
-+
-+	rcu_read_lock();
-+	offload = rcu_dereference(nf_flow_table_hw_hook);
-+	if (offload)
-+		offload->del(net, flow);
-+	rcu_read_unlock();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_del);
-+
-+int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload)
-+{
-+	if (rcu_access_pointer(nf_flow_table_hw_hook))
-+		return -EBUSY;
-+
-+	rcu_assign_pointer(nf_flow_table_hw_hook, offload);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_hw_register);
-+
-+void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload)
-+{
-+	WARN_ON(rcu_access_pointer(nf_flow_table_hw_hook) != offload);
-+	rcu_assign_pointer(nf_flow_table_hw_hook, NULL);
-+
-+	synchronize_rcu();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_hw_unregister);
-+
- static int nf_flow_table_netdev_event(struct notifier_block *this,
- 				      unsigned long event, void *ptr)
- {
---- /dev/null
-+++ b/net/netfilter/nf_flow_table_hw.c
-@@ -0,0 +1,169 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/rhashtable.h>
-+#include <linux/netdevice.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_tuple.h>
-+
-+static DEFINE_SPINLOCK(flow_offload_hw_pending_list_lock);
-+static LIST_HEAD(flow_offload_hw_pending_list);
-+
-+static DEFINE_MUTEX(nf_flow_offload_hw_mutex);
-+
-+struct flow_offload_hw {
-+	struct list_head	list;
-+	enum flow_offload_type	type;
-+	struct flow_offload	*flow;
-+	struct nf_conn		*ct;
-+	possible_net_t		flow_hw_net;
-+};
-+
-+static int do_flow_offload_hw(struct net *net, struct flow_offload *flow,
-+			      int type)
-+{
-+	struct net_device *indev;
-+	int ret, ifindex;
-+
-+	ifindex = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.iifidx;
-+	indev = dev_get_by_index(net, ifindex);
-+	if (WARN_ON(!indev))
-+		return 0;
-+
-+	mutex_lock(&nf_flow_offload_hw_mutex);
-+	ret = indev->netdev_ops->ndo_flow_offload(type, flow);
-+	mutex_unlock(&nf_flow_offload_hw_mutex);
-+
-+	dev_put(indev);
-+
-+	return ret;
-+}
-+
-+static void flow_offload_hw_work_add(struct flow_offload_hw *offload)
-+{
-+	struct net *net;
-+	int ret;
-+
-+	if (nf_ct_is_dying(offload->ct))
-+		return;
-+
-+	net = read_pnet(&offload->flow_hw_net);
-+	ret = do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_ADD);
-+	if (ret >= 0)
-+		offload->flow->flags |= FLOW_OFFLOAD_HW;
-+}
-+
-+static void flow_offload_hw_work_del(struct flow_offload_hw *offload)
-+{
-+	struct net *net = read_pnet(&offload->flow_hw_net);
-+
-+	do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_DEL);
-+}
-+
-+static void flow_offload_hw_work(struct work_struct *work)
-+{
-+	struct flow_offload_hw *offload, *next;
-+	LIST_HEAD(hw_offload_pending);
-+
-+	spin_lock_bh(&flow_offload_hw_pending_list_lock);
-+	list_replace_init(&flow_offload_hw_pending_list, &hw_offload_pending);
-+	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
-+
-+	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+		switch (offload->type) {
-+		case FLOW_OFFLOAD_ADD:
-+			flow_offload_hw_work_add(offload);
-+			break;
-+		case FLOW_OFFLOAD_DEL:
-+			flow_offload_hw_work_del(offload);
-+			break;
-+		}
-+		if (offload->ct)
-+			nf_conntrack_put(&offload->ct->ct_general);
-+		list_del(&offload->list);
-+		kfree(offload);
-+	}
-+}
-+
-+static void flow_offload_queue_work(struct flow_offload_hw *offload)
-+{
-+	spin_lock_bh(&flow_offload_hw_pending_list_lock);
-+	list_add_tail(&offload->list, &flow_offload_hw_pending_list);
-+	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
-+
-+	schedule_work(&nf_flow_offload_hw_work);
-+}
-+
-+static void flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+				struct nf_conn *ct)
-+{
-+	struct flow_offload_hw *offload;
-+
-+	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	if (!offload)
-+		return;
-+
-+	nf_conntrack_get(&ct->ct_general);
-+	offload->type = FLOW_OFFLOAD_ADD;
-+	offload->ct = ct;
-+	offload->flow = flow;
-+	write_pnet(&offload->flow_hw_net, net);
-+
-+	flow_offload_queue_work(offload);
-+}
-+
-+static void flow_offload_hw_del(struct net *net, struct flow_offload *flow)
-+{
-+	struct flow_offload_hw *offload;
-+
-+	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	if (!offload)
-+		return;
-+
-+	offload->type = FLOW_OFFLOAD_DEL;
-+	offload->ct = NULL;
-+	offload->flow = flow;
-+	write_pnet(&offload->flow_hw_net, net);
-+
-+	flow_offload_queue_work(offload);
-+}
-+
-+static const struct nf_flow_table_hw flow_offload_hw = {
-+	.add	= flow_offload_hw_add,
-+	.del	= flow_offload_hw_del,
-+	.owner	= THIS_MODULE,
-+};
-+
-+static int __init nf_flow_table_hw_module_init(void)
-+{
-+	INIT_WORK(&nf_flow_offload_hw_work, flow_offload_hw_work);
-+	nf_flow_table_hw_register(&flow_offload_hw);
-+
-+	return 0;
-+}
-+
-+static void __exit nf_flow_table_hw_module_exit(void)
-+{
-+	struct flow_offload_hw *offload, *next;
-+	LIST_HEAD(hw_offload_pending);
-+
-+	nf_flow_table_hw_unregister(&flow_offload_hw);
-+	cancel_work_sync(&nf_flow_offload_hw_work);
-+
-+	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+		if (offload->ct)
-+			nf_conntrack_put(&offload->ct->ct_general);
-+		list_del(&offload->list);
-+		kfree(offload);
-+	}
-+}
-+
-+module_init(nf_flow_table_hw_module_init);
-+module_exit(nf_flow_table_hw_module_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
-+MODULE_ALIAS("nf-flow-table-hw");
---- a/net/netfilter/nf_tables_api.c
-+++ b/net/netfilter/nf_tables_api.c
-@@ -5458,6 +5458,13 @@ static int nf_tables_flowtable_parse_hoo
- 	if (err < 0)
- 		return err;
- 
-+	for (i = 0; i < n; i++) {
-+		if (flowtable->data.flags & NF_FLOWTABLE_F_HW &&
-+		    !dev_array[i]->netdev_ops->ndo_flow_offload) {
-+			return -EOPNOTSUPP;
-+		}
-+	}
-+
- 	ops = kcalloc(n, sizeof(struct nf_hook_ops), GFP_KERNEL);
- 	if (!ops)
- 		return -ENOMEM;
-@@ -5589,10 +5596,19 @@ static int nf_tables_newflowtable(struct
- 	}
- 
- 	flowtable->data.type = type;
-+	write_pnet(&flowtable->data.ft_net, net);
-+
- 	err = type->init(&flowtable->data);
- 	if (err < 0)
- 		goto err3;
- 
-+	if (nla[NFTA_FLOWTABLE_FLAGS]) {
-+		flowtable->data.flags =
-+			ntohl(nla_get_be32(nla[NFTA_FLOWTABLE_FLAGS]));
-+		if (flowtable->data.flags & ~NF_FLOWTABLE_F_HW)
-+			goto err4;
-+	}
-+
- 	err = nf_tables_flowtable_parse_hook(&ctx, nla[NFTA_FLOWTABLE_HOOK],
- 					     flowtable);
- 	if (err < 0)
-@@ -5718,7 +5734,8 @@ static int nf_tables_fill_flowtable_info
- 	    nla_put_string(skb, NFTA_FLOWTABLE_NAME, flowtable->name) ||
- 	    nla_put_be32(skb, NFTA_FLOWTABLE_USE, htonl(flowtable->use)) ||
- 	    nla_put_be64(skb, NFTA_FLOWTABLE_HANDLE, cpu_to_be64(flowtable->handle),
--			 NFTA_FLOWTABLE_PAD))
-+			 NFTA_FLOWTABLE_PAD) ||
-+	    nla_put_be32(skb, NFTA_FLOWTABLE_FLAGS, htonl(flowtable->data.flags)))
- 		goto nla_put_failure;
- 
- 	nest = nla_nest_start(skb, NFTA_FLOWTABLE_HOOK);
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -124,6 +124,9 @@ static void nft_flow_offload_eval(const
- 	if (ret < 0)
- 		goto err_flow_add;
- 
-+	if (flowtable->flags & NF_FLOWTABLE_F_HW)
-+		nf_flow_offload_hw_add(nft_net(pkt), flow, ct);
-+
- 	return;
- 
- err_flow_add:
diff --git a/target/linux/generic/pending-4.19/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch b/target/linux/generic/pending-4.19/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch
deleted file mode 100644
index 87ff634793..0000000000
--- a/target/linux/generic/pending-4.19/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch
+++ /dev/null
@@ -1,303 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:46:31 +0100
-Subject: [PATCH] netfilter: nf_flow_table: support hw offload through
- virtual interfaces
-
-There are hardware offload devices that support offloading VLANs and
-PPPoE devices. Additionally, it is useful to be able to offload packets
-routed through bridge interfaces as well.
-Add support for finding the path to the offload device through these
-virtual interfaces, while collecting useful parameters for the offload
-device, like VLAN ID/protocol, PPPoE session and Ethernet MAC address.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -919,6 +919,7 @@ struct dev_ifalias {
- };
- 
- struct flow_offload;
-+struct flow_offload_hw_path;
- 
- enum flow_offload_type {
- 	FLOW_OFFLOAD_ADD	= 0,
-@@ -1157,8 +1158,15 @@ enum flow_offload_type {
-  * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
-  *			     u16 flags);
-  *
-+ * int (*ndo_flow_offload_check)(struct flow_offload_hw_path *path);
-+ *	For virtual devices like bridges, vlan, and pppoe, fill in the
-+ *	underlying network device that can be used for offloading connections.
-+ *	Return an error if offloading is not supported.
-+ *
-  * int (*ndo_flow_offload)(enum flow_offload_type type,
-- *			   struct flow_offload *flow);
-+ *			   struct flow_offload *flow,
-+ *			   struct flow_offload_hw_path *src,
-+ *			   struct flow_offload_hw_path *dest);
-  *	Adds/deletes flow entry to/from net device flowtable.
-  *
-  * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
-@@ -1388,8 +1396,11 @@ struct net_device_ops {
- 	int			(*ndo_bridge_dellink)(struct net_device *dev,
- 						      struct nlmsghdr *nlh,
- 						      u16 flags);
-+	int			(*ndo_flow_offload_check)(struct flow_offload_hw_path *path);
- 	int			(*ndo_flow_offload)(enum flow_offload_type type,
--						    struct flow_offload *flow);
-+						    struct flow_offload *flow,
-+						    struct flow_offload_hw_path *src,
-+						    struct flow_offload_hw_path *dest);
- 	int			(*ndo_change_carrier)(struct net_device *dev,
- 						      bool new_carrier);
- 	int			(*ndo_get_phys_port_id)(struct net_device *dev,
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -86,6 +86,21 @@ struct flow_offload {
- 	};
- };
- 
-+#define FLOW_OFFLOAD_PATH_ETHERNET	BIT(0)
-+#define FLOW_OFFLOAD_PATH_VLAN		BIT(1)
-+#define FLOW_OFFLOAD_PATH_PPPOE		BIT(2)
-+
-+struct flow_offload_hw_path {
-+	struct net_device *dev;
-+	u32 flags;
-+
-+	u8 eth_src[ETH_ALEN];
-+	u8 eth_dest[ETH_ALEN];
-+	u16 vlan_proto;
-+	u16 vlan_id;
-+	u16 pppoe_sid;
-+};
-+
- #define NF_FLOW_TIMEOUT (30 * HZ)
- 
- struct nf_flow_route {
---- a/net/netfilter/nf_flow_table_hw.c
-+++ b/net/netfilter/nf_flow_table_hw.c
-@@ -19,48 +19,75 @@ struct flow_offload_hw {
- 	enum flow_offload_type	type;
- 	struct flow_offload	*flow;
- 	struct nf_conn		*ct;
--	possible_net_t		flow_hw_net;
-+
-+	struct flow_offload_hw_path src;
-+	struct flow_offload_hw_path dest;
- };
- 
--static int do_flow_offload_hw(struct net *net, struct flow_offload *flow,
--			      int type)
-+static void flow_offload_check_ethernet(struct flow_offload_tuple *tuple,
-+					struct flow_offload_hw_path *path)
- {
--	struct net_device *indev;
--	int ret, ifindex;
-+	struct net_device *dev = path->dev;
-+	struct neighbour *n;
- 
--	ifindex = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.iifidx;
--	indev = dev_get_by_index(net, ifindex);
--	if (WARN_ON(!indev))
--		return 0;
--
--	mutex_lock(&nf_flow_offload_hw_mutex);
--	ret = indev->netdev_ops->ndo_flow_offload(type, flow);
--	mutex_unlock(&nf_flow_offload_hw_mutex);
-+	if (dev->type != ARPHRD_ETHER)
-+		return;
- 
--	dev_put(indev);
-+	memcpy(path->eth_src, path->dev->dev_addr, ETH_ALEN);
-+	n = dst_neigh_lookup(tuple->dst_cache, &tuple->src_v4);
-+	if (!n)
-+		return;
- 
--	return ret;
-+	memcpy(path->eth_dest, n->ha, ETH_ALEN);
-+	path->flags |= FLOW_OFFLOAD_PATH_ETHERNET;
-+	neigh_release(n);
- }
- 
--static void flow_offload_hw_work_add(struct flow_offload_hw *offload)
-+static int flow_offload_check_path(struct net *net,
-+				   struct flow_offload_tuple *tuple,
-+				   struct flow_offload_hw_path *path)
- {
--	struct net *net;
--	int ret;
-+	struct net_device *dev;
- 
--	if (nf_ct_is_dying(offload->ct))
--		return;
-+	dev = dev_get_by_index_rcu(net, tuple->iifidx);
-+	if (!dev)
-+		return -ENOENT;
-+
-+	path->dev = dev;
-+	flow_offload_check_ethernet(tuple, path);
- 
--	net = read_pnet(&offload->flow_hw_net);
--	ret = do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_ADD);
--	if (ret >= 0)
--		offload->flow->flags |= FLOW_OFFLOAD_HW;
-+	if (dev->netdev_ops->ndo_flow_offload_check)
-+		return dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
- }
- 
--static void flow_offload_hw_work_del(struct flow_offload_hw *offload)
-+static int do_flow_offload_hw(struct flow_offload_hw *offload)
- {
--	struct net *net = read_pnet(&offload->flow_hw_net);
-+	struct net_device *src_dev = offload->src.dev;
-+	struct net_device *dest_dev = offload->dest.dev;
-+	int ret;
-+
-+	ret = src_dev->netdev_ops->ndo_flow_offload(offload->type,
-+						    offload->flow,
-+						    &offload->src,
-+						    &offload->dest);
-+
-+	/* restore devices in case the driver mangled them */
-+	offload->src.dev = src_dev;
-+	offload->dest.dev = dest_dev;
-+
-+	return ret;
-+}
- 
--	do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_DEL);
-+static void flow_offload_hw_free(struct flow_offload_hw *offload)
-+{
-+	dev_put(offload->src.dev);
-+	dev_put(offload->dest.dev);
-+	if (offload->ct)
-+		nf_conntrack_put(&offload->ct->ct_general);
-+	list_del(&offload->list);
-+	kfree(offload);
- }
- 
- static void flow_offload_hw_work(struct work_struct *work)
-@@ -73,18 +100,22 @@ static void flow_offload_hw_work(struct
- 	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
- 
- 	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+		mutex_lock(&nf_flow_offload_hw_mutex);
- 		switch (offload->type) {
- 		case FLOW_OFFLOAD_ADD:
--			flow_offload_hw_work_add(offload);
-+			if (nf_ct_is_dying(offload->ct))
-+				break;
-+
-+			if (do_flow_offload_hw(offload) >= 0)
-+				offload->flow->flags |= FLOW_OFFLOAD_HW;
- 			break;
- 		case FLOW_OFFLOAD_DEL:
--			flow_offload_hw_work_del(offload);
-+			do_flow_offload_hw(offload);
- 			break;
- 		}
--		if (offload->ct)
--			nf_conntrack_put(&offload->ct->ct_general);
--		list_del(&offload->list);
--		kfree(offload);
-+		mutex_unlock(&nf_flow_offload_hw_mutex);
-+
-+		flow_offload_hw_free(offload);
- 	}
- }
- 
-@@ -97,20 +128,55 @@ static void flow_offload_queue_work(stru
- 	schedule_work(&nf_flow_offload_hw_work);
- }
- 
-+static struct flow_offload_hw *
-+flow_offload_hw_prepare(struct net *net, struct flow_offload *flow)
-+{
-+	struct flow_offload_hw_path src = {};
-+	struct flow_offload_hw_path dest = {};
-+	struct flow_offload_tuple *tuple;
-+	struct flow_offload_hw *offload = NULL;
-+
-+	rcu_read_lock_bh();
-+
-+	tuple = &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple;
-+	if (flow_offload_check_path(net, tuple, &src))
-+		goto out;
-+
-+	tuple = &flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple;
-+	if (flow_offload_check_path(net, tuple, &dest))
-+		goto out;
-+
-+	if (!src.dev->netdev_ops->ndo_flow_offload)
-+		goto out;
-+
-+	offload = kzalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	if (!offload)
-+		goto out;
-+
-+	dev_hold(src.dev);
-+	dev_hold(dest.dev);
-+	offload->src = src;
-+	offload->dest = dest;
-+	offload->flow = flow;
-+
-+out:
-+	rcu_read_unlock_bh();
-+
-+	return offload;
-+}
-+
- static void flow_offload_hw_add(struct net *net, struct flow_offload *flow,
- 				struct nf_conn *ct)
- {
- 	struct flow_offload_hw *offload;
- 
--	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	offload = flow_offload_hw_prepare(net, flow);
- 	if (!offload)
- 		return;
- 
- 	nf_conntrack_get(&ct->ct_general);
- 	offload->type = FLOW_OFFLOAD_ADD;
- 	offload->ct = ct;
--	offload->flow = flow;
--	write_pnet(&offload->flow_hw_net, net);
- 
- 	flow_offload_queue_work(offload);
- }
-@@ -119,14 +185,11 @@ static void flow_offload_hw_del(struct n
- {
- 	struct flow_offload_hw *offload;
- 
--	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+	offload = flow_offload_hw_prepare(net, flow);
- 	if (!offload)
- 		return;
- 
- 	offload->type = FLOW_OFFLOAD_DEL;
--	offload->ct = NULL;
--	offload->flow = flow;
--	write_pnet(&offload->flow_hw_net, net);
- 
- 	flow_offload_queue_work(offload);
- }
-@@ -153,12 +216,8 @@ static void __exit nf_flow_table_hw_modu
- 	nf_flow_table_hw_unregister(&flow_offload_hw);
- 	cancel_work_sync(&nf_flow_offload_hw_work);
- 
--	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
--		if (offload->ct)
--			nf_conntrack_put(&offload->ct->ct_general);
--		list_del(&offload->list);
--		kfree(offload);
--	}
-+	list_for_each_entry_safe(offload, next, &hw_offload_pending, list)
-+		flow_offload_hw_free(offload);
- }
- 
- module_init(nf_flow_table_hw_module_init);
diff --git a/target/linux/generic/pending-4.19/642-net-8021q-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-4.19/642-net-8021q-support-hardware-flow-table-offload.patch
deleted file mode 100644
index 724f1c46ca..0000000000
--- a/target/linux/generic/pending-4.19/642-net-8021q-support-hardware-flow-table-offload.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:49:58 +0100
-Subject: [PATCH] net: 8021q: support hardware flow table offload
-
-Add the VLAN ID and protocol information
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/8021q/vlan_dev.c
-+++ b/net/8021q/vlan_dev.c
-@@ -32,6 +32,10 @@
- #include <linux/phy.h>
- #include <net/arp.h>
- #include <net/switchdev.h>
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
- 
- #include "vlan.h"
- #include "vlanproc.h"
-@@ -770,6 +774,27 @@ static int vlan_dev_get_iflink(const str
- 	return real_dev->ifindex;
- }
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int vlan_dev_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+	struct net_device *dev = path->dev;
-+	struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
-+
-+	if (path->flags & FLOW_OFFLOAD_PATH_VLAN)
-+		return -EEXIST;
-+
-+	path->flags |= FLOW_OFFLOAD_PATH_VLAN;
-+	path->vlan_proto = vlan->vlan_proto;
-+	path->vlan_id = vlan->vlan_id;
-+	path->dev = vlan->real_dev;
-+
-+	if (vlan->real_dev->netdev_ops->ndo_flow_offload_check)
-+		return vlan->real_dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct ethtool_ops vlan_ethtool_ops = {
- 	.get_link_ksettings	= vlan_ethtool_get_link_ksettings,
- 	.get_drvinfo	        = vlan_ethtool_get_drvinfo,
-@@ -807,6 +832,9 @@ static const struct net_device_ops vlan_
- 	.ndo_fix_features	= vlan_dev_fix_features,
- 	.ndo_get_lock_subclass  = vlan_dev_get_lock_subclass,
- 	.ndo_get_iflink		= vlan_dev_get_iflink,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.ndo_flow_offload_check = vlan_dev_flow_offload_check,
-+#endif
- };
- 
- static void vlan_dev_free(struct net_device *dev)
diff --git a/target/linux/generic/pending-4.19/643-net-bridge-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-4.19/643-net-bridge-support-hardware-flow-table-offload.patch
deleted file mode 100644
index 7d9c8abe9c..0000000000
--- a/target/linux/generic/pending-4.19/643-net-bridge-support-hardware-flow-table-offload.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:50:37 +0100
-Subject: [PATCH] net: bridge: support hardware flow table offload
-
-Look up the real device and pass it on
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/bridge/br_device.c
-+++ b/net/bridge/br_device.c
-@@ -18,6 +18,10 @@
- #include <linux/ethtool.h>
- #include <linux/list.h>
- #include <linux/netfilter_bridge.h>
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
- 
- #include <linux/uaccess.h>
- #include "br_private.h"
-@@ -370,6 +374,28 @@ static const struct ethtool_ops br_ethto
- 	.get_link	= ethtool_op_get_link,
- };
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int br_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+	struct net_device *dev = path->dev;
-+	struct net_bridge *br = netdev_priv(dev);
-+	struct net_bridge_fdb_entry *dst;
-+
-+	if (!(path->flags & FLOW_OFFLOAD_PATH_ETHERNET))
-+		return -EINVAL;
-+
-+	dst = br_fdb_find_rcu(br, path->eth_dest, path->vlan_id);
-+	if (!dst || !dst->dst)
-+		return -ENOENT;
-+
-+	path->dev = dst->dst->dev;
-+	if (path->dev->netdev_ops->ndo_flow_offload_check)
-+		return path->dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct net_device_ops br_netdev_ops = {
- 	.ndo_open		 = br_dev_open,
- 	.ndo_stop		 = br_dev_stop,
-@@ -397,6 +423,9 @@ static const struct net_device_ops br_ne
- 	.ndo_bridge_setlink	 = br_setlink,
- 	.ndo_bridge_dellink	 = br_dellink,
- 	.ndo_features_check	 = passthru_features_check,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.ndo_flow_offload_check	 = br_flow_offload_check,
-+#endif
- };
- 
- static struct device_type br_type = {
diff --git a/target/linux/generic/pending-4.19/644-net-pppoe-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-4.19/644-net-pppoe-support-hardware-flow-table-offload.patch
deleted file mode 100644
index 26d46ec005..0000000000
--- a/target/linux/generic/pending-4.19/644-net-pppoe-support-hardware-flow-table-offload.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 21:15:00 +0100
-Subject: [PATCH] net: pppoe: support hardware flow table offload
-
-Pass on the PPPoE session ID and the remote MAC address
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ppp/ppp_generic.c
-+++ b/drivers/net/ppp/ppp_generic.c
-@@ -57,6 +57,11 @@
- #include <net/net_namespace.h>
- #include <net/netns/generic.h>
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-+
- #define PPP_VERSION	"2.4.2"
- 
- /*
-@@ -1368,12 +1373,37 @@ static void ppp_dev_priv_destructor(stru
- 		ppp_destroy_interface(ppp);
- }
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int ppp_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+	struct ppp *ppp = netdev_priv(path->dev);
-+	struct ppp_channel *chan;
-+	struct channel *pch;
-+
-+	if (ppp->flags & SC_MULTILINK)
-+		return -EOPNOTSUPP;
-+
-+	if (list_empty(&ppp->channels))
-+		return -ENODEV;
-+
-+	pch = list_first_entry(&ppp->channels, struct channel, clist);
-+	chan = pch->chan;
-+	if (!chan->ops->flow_offload_check)
-+		return -EOPNOTSUPP;
-+
-+	return chan->ops->flow_offload_check(chan, path);
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct net_device_ops ppp_netdev_ops = {
- 	.ndo_init	 = ppp_dev_init,
- 	.ndo_uninit      = ppp_dev_uninit,
- 	.ndo_start_xmit  = ppp_start_xmit,
- 	.ndo_do_ioctl    = ppp_net_ioctl,
- 	.ndo_get_stats64 = ppp_get_stats64,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.ndo_flow_offload_check = ppp_flow_offload_check,
-+#endif
- };
- 
- static struct device_type ppp_type = {
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -78,6 +78,11 @@
- #include <linux/proc_fs.h>
- #include <linux/seq_file.h>
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-+
- #include <linux/nsproxy.h>
- #include <net/net_namespace.h>
- #include <net/netns/generic.h>
-@@ -976,8 +981,36 @@ static int pppoe_xmit(struct ppp_channel
- 	return __pppoe_xmit(sk, skb);
- }
- 
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int pppoe_flow_offload_check(struct ppp_channel *chan,
-+				    struct flow_offload_hw_path *path)
-+{
-+	struct sock *sk = (struct sock *)chan->private;
-+	struct pppox_sock *po = pppox_sk(sk);
-+	struct net_device *dev = po->pppoe_dev;
-+
-+	if (sock_flag(sk, SOCK_DEAD) ||
-+	    !(sk->sk_state & PPPOX_CONNECTED) || !dev)
-+		return -ENODEV;
-+
-+	path->dev = po->pppoe_dev;
-+	path->flags |= FLOW_OFFLOAD_PATH_PPPOE;
-+	memcpy(path->eth_src, po->pppoe_dev->dev_addr, ETH_ALEN);
-+	memcpy(path->eth_dest, po->pppoe_pa.remote, ETH_ALEN);
-+	path->pppoe_sid = be16_to_cpu(po->num);
-+
-+	if (path->dev->netdev_ops->ndo_flow_offload_check)
-+		return path->dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+	return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct ppp_channel_ops pppoe_chan_ops = {
- 	.start_xmit = pppoe_xmit,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	.flow_offload_check = pppoe_flow_offload_check,
-+#endif
- };
- 
- static int pppoe_recvmsg(struct socket *sock, struct msghdr *m,
---- a/include/linux/ppp_channel.h
-+++ b/include/linux/ppp_channel.h
-@@ -32,6 +32,10 @@ struct ppp_channel_ops {
- 	int	(*start_xmit)(struct ppp_channel *, struct sk_buff *);
- 	/* Handle an ioctl call that has come in via /dev/ppp. */
- 	int	(*ioctl)(struct ppp_channel *, unsigned int, unsigned long);
-+
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+	int	(*flow_offload_check)(struct ppp_channel *, struct flow_offload_hw_path *);
-+#endif
- };
- 
- struct ppp_channel {
diff --git a/target/linux/generic/pending-4.19/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch b/target/linux/generic/pending-4.19/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch
deleted file mode 100644
index 292f5f8cc5..0000000000
--- a/target/linux/generic/pending-4.19/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 25 Mar 2018 21:10:55 +0200
-Subject: [PATCH] netfilter: nf_flow_table: rework hardware offload timeout
- handling
-
-Some offload implementations send keepalive packets + explicit
-notifications of TCP FIN/RST packets. In this case it is more convenient
-to simply let the driver update flow->timeout handling and use the
-regular flow offload gc step.
-
-For drivers that manage their own lifetime, a separate flag can be set
-to avoid gc timeouts.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -76,6 +76,7 @@ struct flow_offload_tuple_rhash {
- #define FLOW_OFFLOAD_DYING	0x4
- #define FLOW_OFFLOAD_TEARDOWN	0x8
- #define FLOW_OFFLOAD_HW		0x10
-+#define FLOW_OFFLOAD_KEEP	0x20
- 
- struct flow_offload {
- 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -356,7 +356,7 @@ static int nf_flow_offload_gc_step(struc
- 		if (!teardown)
- 			nf_ct_offload_timeout(flow);
- 
--		if (nf_flow_in_hw(flow) && !teardown)
-+		if ((flow->flags & FLOW_OFFLOAD_KEEP) && !teardown)
- 			continue;
- 
- 		if (nf_flow_has_expired(flow) || teardown)
diff --git a/target/linux/generic/pending-4.19/646-netfilter-nf_flow_table-rework-private-driver-data.patch b/target/linux/generic/pending-4.19/646-netfilter-nf_flow_table-rework-private-driver-data.patch
deleted file mode 100644
index f94d7ad301..0000000000
--- a/target/linux/generic/pending-4.19/646-netfilter-nf_flow_table-rework-private-driver-data.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 27 Apr 2018 14:42:14 +0200
-Subject: [PATCH] netfilter: nf_flow_table: rework private driver data
-
-Move the timeout out of the union, since it can be shared between the
-driver and the stack. Add a private pointer that the driver can use to
-point to its own data structures
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -81,9 +81,10 @@ struct flow_offload_tuple_rhash {
- struct flow_offload {
- 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
- 	u32					flags;
-+	u32					timeout;
- 	union {
- 		/* Your private driver data here. */
--		u32		timeout;
-+		void *priv;
- 	};
- };
- 
diff --git a/target/linux/generic/pending-4.19/655-increase_skb_pad.patch b/target/linux/generic/pending-4.19/655-increase_skb_pad.patch
deleted file mode 100644
index db79a6db22..0000000000
--- a/target/linux/generic/pending-4.19/655-increase_skb_pad.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
-
-lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/skbuff.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2493,7 +2493,7 @@ static inline int pskb_network_may_pull(
-  * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
-  */
- #ifndef NET_SKB_PAD
--#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
-+#define NET_SKB_PAD	max(64, L1_CACHE_BYTES)
- #endif
- 
- int ___pskb_trim(struct sk_buff *skb, unsigned int len);
diff --git a/target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
deleted file mode 100644
index e21f510fee..0000000000
--- a/target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
+++ /dev/null
@@ -1,500 +0,0 @@
-From: Steven Barth <steven@midlink.org>
-Subject: Add support for MAP-E FMRs (mesh mode)
-
-MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
-between MAP CEs (mesh mode) without the need to forward such data to a
-border relay. This is similar to how 6rd works but for IPv4 over IPv6.
-
-Signed-off-by: Steven Barth <cyrus@openwrt.org>
----
- include/net/ip6_tunnel.h       |  13 ++
- include/uapi/linux/if_tunnel.h |  13 ++
- net/ipv6/ip6_tunnel.c          | 276 +++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 291 insertions(+), 11 deletions(-)
-
---- a/include/net/ip6_tunnel.h
-+++ b/include/net/ip6_tunnel.h
-@@ -18,6 +18,18 @@
- /* determine capability on a per-packet basis */
- #define IP6_TNL_F_CAP_PER_PACKET 0x40000
- 
-+/* IPv6 tunnel FMR */
-+struct __ip6_tnl_fmr {
-+	struct __ip6_tnl_fmr *next; /* next fmr in list */
-+	struct in6_addr ip6_prefix;
-+	struct in_addr ip4_prefix;
-+
-+	__u8 ip6_prefix_len;
-+	__u8 ip4_prefix_len;
-+	__u8 ea_len;
-+	__u8 offset;
-+};
-+
- struct __ip6_tnl_parm {
- 	char name[IFNAMSIZ];	/* name of tunnel device */
- 	int link;		/* ifindex of underlying L2 interface */
-@@ -29,6 +41,7 @@ struct __ip6_tnl_parm {
- 	__u32 flags;		/* tunnel flags */
- 	struct in6_addr laddr;	/* local tunnel end-point address */
- 	struct in6_addr raddr;	/* remote tunnel end-point address */
-+	struct __ip6_tnl_fmr *fmrs;	/* FMRs */
- 
- 	__be16			i_flags;
- 	__be16			o_flags;
---- a/include/uapi/linux/if_tunnel.h
-+++ b/include/uapi/linux/if_tunnel.h
-@@ -77,10 +77,23 @@ enum {
- 	IFLA_IPTUN_ENCAP_DPORT,
- 	IFLA_IPTUN_COLLECT_METADATA,
- 	IFLA_IPTUN_FWMARK,
-+	IFLA_IPTUN_FMRS,
- 	__IFLA_IPTUN_MAX,
- };
- #define IFLA_IPTUN_MAX	(__IFLA_IPTUN_MAX - 1)
- 
-+enum {
-+	IFLA_IPTUN_FMR_UNSPEC,
-+	IFLA_IPTUN_FMR_IP6_PREFIX,
-+	IFLA_IPTUN_FMR_IP4_PREFIX,
-+	IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_EA_LEN,
-+	IFLA_IPTUN_FMR_OFFSET,
-+	__IFLA_IPTUN_FMR_MAX,
-+};
-+#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
-+
- enum tunnel_encap_types {
- 	TUNNEL_ENCAP_NONE,
- 	TUNNEL_ENCAP_FOU,
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -16,6 +16,8 @@
-  *      as published by the Free Software Foundation; either version
-  *      2 of the License, or (at your option) any later version.
-  *
-+ *	Changes:
-+ * Steven Barth <cyrus@openwrt.org>:		MAP-E FMR support
-  */
- 
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -72,9 +74,9 @@ static bool log_ecn_error = true;
- module_param(log_ecn_error, bool, 0644);
- MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
- 
--static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
-+static u32 HASH(const struct in6_addr *addr)
- {
--	u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
-+	u32 hash = ipv6_addr_hash(addr);
- 
- 	return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT);
- }
-@@ -141,20 +143,29 @@ static struct net_device_stats *ip6_get_
- static struct ip6_tnl *
- ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
- {
--	unsigned int hash = HASH(remote, local);
-+	unsigned int hash = HASH(local);
- 	struct ip6_tnl *t;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 	struct in6_addr any;
-+	struct __ip6_tnl_fmr *fmr;
- 
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
--		if (ipv6_addr_equal(local, &t->parms.laddr) &&
--		    ipv6_addr_equal(remote, &t->parms.raddr) &&
--		    (t->dev->flags & IFF_UP))
-+		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
-+				!(t->dev->flags & IFF_UP))
-+			continue;
-+
-+		if (ipv6_addr_equal(remote, &t->parms.raddr))
- 			return t;
-+
-+		for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+			if (ipv6_prefix_equal(remote, &fmr->ip6_prefix,
-+					fmr->ip6_prefix_len))
-+				return t;
-+		}
- 	}
- 
- 	memset(&any, 0, sizeof(any));
--	hash = HASH(&any, local);
-+	hash = HASH(local);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (ipv6_addr_equal(local, &t->parms.laddr) &&
- 		    ipv6_addr_any(&t->parms.raddr) &&
-@@ -162,7 +173,7 @@ ip6_tnl_lookup(struct net *net, const st
- 			return t;
- 	}
- 
--	hash = HASH(remote, &any);
-+	hash = HASH(&any);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (ipv6_addr_equal(remote, &t->parms.raddr) &&
- 		    ipv6_addr_any(&t->parms.laddr) &&
-@@ -202,7 +213,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
- 
- 	if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
- 		prio = 1;
--		h = HASH(remote, local);
-+		h = HASH(local);
- 	}
- 	return &ip6n->tnls[prio][h];
- }
-@@ -383,6 +394,12 @@ ip6_tnl_dev_uninit(struct net_device *de
- 	struct net *net = t->net;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+
- 	if (dev == ip6n->fb_tnl_dev)
- 		RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
- 	else
-@@ -772,6 +789,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
- }
- EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
- 
-+/**
-+ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
-+ *   @dest: destination IPv6 address buffer
-+ *   @skb: received socket buffer
-+ *   @fmr: MAP FMR
-+ *   @xmit: Calculate for xmit or rcv
-+ **/
-+static void ip4ip6_fmr_calc(struct in6_addr *dest,
-+		const struct iphdr *iph, const uint8_t *end,
-+		const struct __ip6_tnl_fmr *fmr, bool xmit)
-+{
-+	int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
-+	u8 *portp = NULL;
-+	bool use_dest_addr;
-+	const struct iphdr *dsth = iph;
-+
-+	if ((u8*)dsth >= end)
-+		return;
-+
-+	/* find significant IP header */
-+	if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+		if (ih && ((u8*)&ih[1]) <= end && (
-+			ih->type == ICMP_DEST_UNREACH ||
-+			ih->type == ICMP_SOURCE_QUENCH ||
-+			ih->type == ICMP_TIME_EXCEEDED ||
-+			ih->type == ICMP_PARAMETERPROB ||
-+			ih->type == ICMP_REDIRECT))
-+				dsth = (const struct iphdr*)&ih[1];
-+	}
-+
-+	/* in xmit-path use dest port by default and source port only if
-+		this is an ICMP reply to something else; vice versa in rcv-path */
-+	use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
-+
-+	/* get dst port */
-+	if (((u8*)&dsth[1]) <= end && (
-+		dsth->protocol == IPPROTO_UDP ||
-+		dsth->protocol == IPPROTO_TCP ||
-+		dsth->protocol == IPPROTO_SCTP ||
-+		dsth->protocol == IPPROTO_DCCP)) {
-+			/* for UDP, TCP, SCTP and DCCP source and dest port
-+			follow IPv4 header directly */
-+			portp = ((u8*)dsth) + dsth->ihl * 4;
-+
-+			if (use_dest_addr)
-+				portp += sizeof(u16);
-+	} else if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+
-+		/* use icmp identifier as port */
-+		if (((u8*)&ih) <= end && (
-+		    (use_dest_addr && (
-+		    ih->type == ICMP_ECHOREPLY ||
-+			ih->type == ICMP_TIMESTAMPREPLY ||
-+			ih->type == ICMP_INFO_REPLY ||
-+			ih->type == ICMP_ADDRESSREPLY)) ||
-+			(!use_dest_addr && (
-+			ih->type == ICMP_ECHO ||
-+			ih->type == ICMP_TIMESTAMP ||
-+			ih->type == ICMP_INFO_REQUEST ||
-+			ih->type == ICMP_ADDRESS)
-+			)))
-+				portp = (u8*)&ih->un.echo.id;
-+	}
-+
-+	if ((portp && &portp[2] <= end) || psidlen == 0) {
-+		int frombyte = fmr->ip6_prefix_len / 8;
-+		int fromrem = fmr->ip6_prefix_len % 8;
-+		int bytes = sizeof(struct in6_addr) - frombyte;
-+		const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
-+		u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
-+		u64 t = 0;
-+
-+		/* extract PSID from port and add it to eabits */
-+		u16 psidbits = 0;
-+		if (psidlen > 0) {
-+			psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
-+			psidbits >>= 16 - psidlen - fmr->offset;
-+			psidbits = (u16)(psidbits << (16 - psidlen));
-+			eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
-+		}
-+
-+		/* rewrite destination address */
-+		*dest = fmr->ip6_prefix;
-+		memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
-+		dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
-+
-+		if (bytes > sizeof(u64))
-+			bytes = sizeof(u64);
-+
-+		/* insert eabits */
-+		memcpy(&t, &dest->s6_addr[frombyte], bytes);
-+		t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
-+			<< (64 - fmr->ea_len - fromrem));
-+		t = cpu_to_be64(t | (eabits >> fromrem));
-+		memcpy(&dest->s6_addr[frombyte], &t, bytes);
-+	}
-+}
-+
-+
- static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
- 			 const struct tnl_ptk_info *tpi,
- 			 struct metadata_dst *tun_dst,
-@@ -824,6 +942,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
- 	skb_reset_network_header(skb);
- 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
- 
-+	if (tpi->proto == htons(ETH_P_IP) && tunnel->parms.fmrs &&
-+		!ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) {
-+			/* Packet didn't come from BR, so lookup FMR */
-+			struct __ip6_tnl_fmr *fmr;
-+			struct in6_addr expected = tunnel->parms.raddr;
-+			for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next)
-+				if (ipv6_prefix_equal(&ipv6h->saddr,
-+					&fmr->ip6_prefix, fmr->ip6_prefix_len))
-+						break;
-+
-+			/* Check that IPv6 matches IPv4 source to prevent spoofing */
-+			if (fmr)
-+				ip4ip6_fmr_calc(&expected, ip_hdr(skb),
-+						skb_tail_pointer(skb), fmr, false);
-+
-+			if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
-+				rcu_read_unlock();
-+				goto drop;
-+			}
-+	}
-+
- 	__skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
- 
- 	err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
-@@ -956,6 +1095,7 @@ static void init_tel_txopt(struct ipv6_t
- 	opt->ops.opt_nflen = 8;
- }
- 
-+
- /**
-  * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
-  *   @t: the outgoing tunnel device
-@@ -1309,6 +1449,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
- {
- 	struct ip6_tnl *t = netdev_priv(dev);
- 	struct ipv6hdr *ipv6h;
-+	struct __ip6_tnl_fmr *fmr;
- 	int encap_limit = -1;
- 	__u16 offset;
- 	struct flowi6 fl6;
-@@ -1373,6 +1514,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
- 
- 	fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
- 
-+	/* try to find matching FMR */
-+	for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+		unsigned mshift = 32 - fmr->ip4_prefix_len;
-+		if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
-+				ntohl(ip_hdr(skb)->daddr) >> mshift)
-+			break;
-+	}
-+
-+	/* change dstaddr according to FMR */
-+	if (fmr)
-+		ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true);
-+
- 	if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
- 		return -1;
- 
-@@ -1504,6 +1657,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
- 	t->parms.link = p->link;
- 	t->parms.proto = p->proto;
- 	t->parms.fwmark = p->fwmark;
-+
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+	t->parms.fmrs = p->fmrs;
-+
- 	dst_cache_reset(&t->dst_cache);
- 	ip6_tnl_link_config(t);
- 	return 0;
-@@ -1542,6 +1703,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
- 	p->flowinfo = u->flowinfo;
- 	p->link = u->link;
- 	p->proto = u->proto;
-+	p->fmrs = NULL;
- 	memcpy(p->name, u->name, sizeof(u->name));
- }
- 
-@@ -1928,6 +2090,15 @@ static int ip6_tnl_validate(struct nlatt
- 	return 0;
- }
- 
-+static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
-+	[IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
-+	[IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
-+};
-+
- static void ip6_tnl_netlink_parms(struct nlattr *data[],
- 				  struct __ip6_tnl_parm *parms)
- {
-@@ -1965,6 +2136,46 @@ static void ip6_tnl_netlink_parms(struct
- 
- 	if (data[IFLA_IPTUN_FWMARK])
- 		parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]);
-+
-+	if (data[IFLA_IPTUN_FMRS]) {
-+		unsigned rem;
-+		struct nlattr *fmr;
-+		nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
-+			struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
-+			struct __ip6_tnl_fmr *nfmr;
-+
-+			nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
-+				fmr, ip6_tnl_fmr_policy, NULL);
-+
-+			if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
-+				continue;
-+
-+			nfmr->offset = 6;
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
-+				nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
-+					sizeof(nfmr->ip6_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
-+				nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
-+					sizeof(nfmr->ip4_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
-+				nfmr->ip6_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
-+				nfmr->ip4_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
-+				nfmr->ea_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
-+				nfmr->offset = nla_get_u8(c);
-+
-+			nfmr->next = parms->fmrs;
-+			parms->fmrs = nfmr;
-+		}
-+	}
- }
- 
- static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2080,6 +2291,12 @@ static void ip6_tnl_dellink(struct net_d
- 
- static size_t ip6_tnl_get_size(const struct net_device *dev)
- {
-+	const struct ip6_tnl *t = netdev_priv(dev);
-+	struct __ip6_tnl_fmr *c;
-+	int fmrs = 0;
-+	for (c = t->parms.fmrs; c; c = c->next)
-+		++fmrs;
-+
- 	return
- 		/* IFLA_IPTUN_LINK */
- 		nla_total_size(4) +
-@@ -2109,6 +2326,24 @@ static size_t ip6_tnl_get_size(const str
- 		nla_total_size(0) +
- 		/* IFLA_IPTUN_FWMARK */
- 		nla_total_size(4) +
-+		/* IFLA_IPTUN_FMRS */
-+		nla_total_size(0) +
-+		(
-+			/* nest */
-+			nla_total_size(0) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX */
-+			nla_total_size(sizeof(struct in6_addr)) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX */
-+			nla_total_size(sizeof(struct in_addr)) +
-+			/* IFLA_IPTUN_FMR_EA_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_OFFSET */
-+			nla_total_size(1)
-+		) * fmrs +
- 		0;
- }
- 
-@@ -2116,6 +2351,9 @@ static int ip6_tnl_fill_info(struct sk_b
- {
- 	struct ip6_tnl *tunnel = netdev_priv(dev);
- 	struct __ip6_tnl_parm *parm = &tunnel->parms;
-+	struct __ip6_tnl_fmr *c;
-+	int fmrcnt = 0;
-+	struct nlattr *fmrs;
- 
- 	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
- 	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2125,9 +2363,27 @@ static int ip6_tnl_fill_info(struct sk_b
- 	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
- 	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
- 	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
--	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark))
-+	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark) ||
-+	    !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
- 		goto nla_put_failure;
- 
-+	for (c = parm->fmrs; c; c = c->next) {
-+		struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
-+		if (!fmr ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
-+				sizeof(c->ip6_prefix), &c->ip6_prefix) ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
-+				sizeof(c->ip4_prefix), &c->ip4_prefix) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
-+				goto nla_put_failure;
-+
-+		nla_nest_end(skb, fmr);
-+	}
-+	nla_nest_end(skb, fmrs);
-+
- 	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2167,6 +2423,7 @@ static const struct nla_policy ip6_tnl_p
- 	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
- 	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },
- 	[IFLA_IPTUN_FWMARK]		= { .type = NLA_U32 },
-+	[IFLA_IPTUN_FMRS]		= { .type = NLA_NESTED },
- };
- 
- static struct rtnl_link_ops ip6_link_ops __read_mostly = {
diff --git a/target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
deleted file mode 100644
index 9e8bc10fd6..0000000000
--- a/target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++ /dev/null
@@ -1,247 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: ipv6: allow rejecting with "source address failed policy"
-
-RFC6204 L-14 requires rejecting traffic from invalid addresses with
-ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
-egress policy) on the LAN side, so add an appropriate rule for that.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/net/netns/ipv6.h       |  1 +
- include/uapi/linux/fib_rules.h |  4 +++
- include/uapi/linux/rtnetlink.h |  1 +
- net/ipv4/fib_semantics.c       |  4 +++
- net/ipv4/fib_trie.c            |  1 +
- net/ipv4/ipmr.c                |  1 +
- net/ipv6/fib6_rules.c          |  4 +++
- net/ipv6/ip6mr.c               |  2 ++
- net/ipv6/route.c               | 58 +++++++++++++++++++++++++++++++++++++++++-
- 9 files changed, 75 insertions(+), 1 deletion(-)
-
---- a/include/net/netns/ipv6.h
-+++ b/include/net/netns/ipv6.h
-@@ -78,6 +78,7 @@ struct netns_ipv6 {
- 	unsigned int		fib6_rules_require_fldissect;
- 	bool			fib6_has_custom_rules;
- 	struct rt6_info         *ip6_prohibit_entry;
-+	struct rt6_info		*ip6_policy_failed_entry;
- 	struct rt6_info         *ip6_blk_hole_entry;
- 	struct fib6_table       *fib6_local_tbl;
- 	struct fib_rules_ops    *fib6_rules_ops;
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -82,6 +82,10 @@ enum {
- 	FR_ACT_BLACKHOLE,	/* Drop without notification */
- 	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
- 	FR_ACT_PROHIBIT,	/* Drop with EACCES */
-+	FR_ACT_RES9,
-+	FR_ACT_RES10,
-+	FR_ACT_RES11,
-+	FR_ACT_POLICY_FAILED,	/* Drop with EACCES */
- 	__FR_ACT_MAX,
- };
- 
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -228,6 +228,7 @@ enum {
- 	RTN_THROW,		/* Not in this table		*/
- 	RTN_NAT,		/* Translate this address	*/
- 	RTN_XRESOLVE,		/* Use external resolver	*/
-+	RTN_POLICY_FAILED,	/* Failed ingress/egress policy */
- 	__RTN_MAX
- };
- 
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -139,6 +139,10 @@ const struct fib_prop fib_props[RTN_MAX
- 		.error	= -EINVAL,
- 		.scope	= RT_SCOPE_NOWHERE,
- 	},
-+	[RTN_POLICY_FAILED] = {
-+		.error	= -EACCES,
-+		.scope	= RT_SCOPE_UNIVERSE,
-+	},
- };
- 
- static void rt_fibinfo_free(struct rtable __rcu **rtp)
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2474,6 +2474,7 @@ static const char *const rtn_type_names[
- 	[RTN_THROW] = "THROW",
- 	[RTN_NAT] = "NAT",
- 	[RTN_XRESOLVE] = "XRESOLVE",
-+	[RTN_POLICY_FAILED] = "POLICY_FAILED",
- };
- 
- static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
---- a/net/ipv4/ipmr.c
-+++ b/net/ipv4/ipmr.c
-@@ -179,6 +179,7 @@ static int ipmr_rule_action(struct fib_r
- 	case FR_ACT_UNREACHABLE:
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
-+	case FR_ACT_POLICY_FAILED:
- 		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
---- a/net/ipv6/fib6_rules.c
-+++ b/net/ipv6/fib6_rules.c
-@@ -221,6 +221,10 @@ static int __fib6_rule_action(struct fib
- 		err = -EACCES;
- 		rt = net->ipv6.ip6_prohibit_entry;
- 		goto discard_pkt;
-+	case FR_ACT_POLICY_FAILED:
-+		err = -EACCES;
-+		rt = net->ipv6.ip6_policy_failed_entry;
-+		goto discard_pkt;
- 	}
- 
- 	tb_id = fib_rule_get_table(rule, arg);
---- a/net/ipv6/ip6mr.c
-+++ b/net/ipv6/ip6mr.c
-@@ -162,6 +162,8 @@ static int ip6mr_rule_action(struct fib_
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
- 		return -EACCES;
-+	case FR_ACT_POLICY_FAILED:
-+		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
- 		return -EINVAL;
---- a/net/ipv6/route.c
-+++ b/net/ipv6/route.c
-@@ -97,6 +97,8 @@ static int		ip6_pkt_discard(struct sk_bu
- static int		ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static int		ip6_pkt_prohibit(struct sk_buff *skb);
- static int		ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed(struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static void		ip6_link_failure(struct sk_buff *skb);
- static void		ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- 					   struct sk_buff *skb, u32 mtu);
-@@ -326,6 +328,18 @@ static const struct rt6_info ip6_prohibi
- 	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
- };
- 
-+static const struct rt6_info ip6_policy_failed_entry_template = {
-+	.dst = {
-+		.__refcnt	= ATOMIC_INIT(1),
-+		.__use		= 1,
-+		.obsolete	= DST_OBSOLETE_FORCE_CHK,
-+		.error		= -EACCES,
-+		.input		= ip6_pkt_policy_failed,
-+		.output		= ip6_pkt_policy_failed_out,
-+	},
-+	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
-+};
-+
- static const struct rt6_info ip6_blk_hole_entry_template = {
- 	.dst = {
- 		.__refcnt	= ATOMIC_INIT(1),
-@@ -900,6 +914,7 @@ static const int fib6_prop[RTN_MAX + 1]
- 	[RTN_BLACKHOLE]	= -EINVAL,
- 	[RTN_UNREACHABLE] = -EHOSTUNREACH,
- 	[RTN_PROHIBIT]	= -EACCES,
-+	[RTN_POLICY_FAILED] = -EACCES,
- 	[RTN_THROW]	= -EAGAIN,
- 	[RTN_NAT]	= -EINVAL,
- 	[RTN_XRESOLVE]	= -EINVAL,
-@@ -937,6 +952,10 @@ static void ip6_rt_init_dst_reject(struc
- 		rt->dst.output = ip6_pkt_prohibit_out;
- 		rt->dst.input = ip6_pkt_prohibit;
- 		break;
-+	case RTN_POLICY_FAILED:
-+		rt->dst.output = ip6_pkt_policy_failed_out;
-+		rt->dst.input = ip6_pkt_policy_failed;
-+		break;
- 	case RTN_THROW:
- 	case RTN_UNREACHABLE:
- 	default:
-@@ -3774,6 +3793,17 @@ static int ip6_pkt_prohibit_out(struct n
- 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
- }
- 
-+static int ip6_pkt_policy_failed(struct sk_buff *skb)
-+{
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
-+}
-+
-+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb)
-+{
-+	skb->dev = skb_dst(skb)->dev;
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
-+}
-+
- /*
-  *	Allocate a dst for local (unicast / anycast) address.
-  */
-@@ -4221,7 +4251,8 @@ static int rtm_to_fib6_config(struct sk_
- 	if (rtm->rtm_type == RTN_UNREACHABLE ||
- 	    rtm->rtm_type == RTN_BLACKHOLE ||
- 	    rtm->rtm_type == RTN_PROHIBIT ||
--	    rtm->rtm_type == RTN_THROW)
-+	    rtm->rtm_type == RTN_THROW ||
-+	    rtm->rtm_type == RTN_POLICY_FAILED)
- 		cfg->fc_flags |= RTF_REJECT;
- 
- 	if (rtm->rtm_type == RTN_LOCAL)
-@@ -5069,6 +5100,8 @@ static int ip6_route_dev_notify(struct n
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
- 		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
-+		net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
-+		net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
- 		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
- 		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
- #endif
-@@ -5080,6 +5113,7 @@ static int ip6_route_dev_notify(struct n
- 		in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
-+		in6_dev_put_clear(&net->ipv6.ip6_policy_failed_entry->rt6i_idev);
- 		in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
- #endif
- 	}
-@@ -5274,6 +5308,15 @@ static int __net_init ip6_route_net_init
- 	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
- 	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
- 			 ip6_template_metrics, true);
-+
-+	net->ipv6.ip6_policy_failed_entry =
-+		kmemdup(&ip6_policy_failed_entry_template,
-+			sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
-+	if (!net->ipv6.ip6_policy_failed_entry)
-+		goto out_ip6_blk_hole_entry;
-+	net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
-+	dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
-+			 ip6_template_metrics, true);
- #endif
- 
- 	net->ipv6.sysctl.flush_delay = 0;
-@@ -5292,6 +5335,8 @@ out:
- 	return ret;
- 
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
-+out_ip6_blk_hole_entry:
-+	kfree(net->ipv6.ip6_blk_hole_entry);
- out_ip6_prohibit_entry:
- 	kfree(net->ipv6.ip6_prohibit_entry);
- out_ip6_null_entry:
-@@ -5312,6 +5357,7 @@ static void __net_exit ip6_route_net_exi
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	kfree(net->ipv6.ip6_prohibit_entry);
- 	kfree(net->ipv6.ip6_blk_hole_entry);
-+	kfree(net->ipv6.ip6_policy_failed_entry);
- #endif
- 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
- }
-@@ -5388,6 +5434,9 @@ void __init ip6_route_init_special_entri
- 	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
- 	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
- 	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
-+	init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
-+	init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
-+		in6_dev_get(init_net.loopback_dev);
-   #endif
- }
- 
diff --git a/target/linux/generic/pending-4.19/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-4.19/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
deleted file mode 100644
index 85adfedc94..0000000000
--- a/target/linux/generic/pending-4.19/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: net: provide defines for _POLICY_FAILED until all code is updated
-
-Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
-unreachable, conflicting with our name.
-
-Add appropriate defines to allow our code to build with the new
-name until we have updated our local patches for older kernels
-and userspace packages.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/uapi/linux/fib_rules.h | 2 ++
- include/uapi/linux/icmpv6.h    | 2 ++
- include/uapi/linux/rtnetlink.h | 2 ++
- 3 files changed, 6 insertions(+)
-
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -89,6 +89,8 @@ enum {
- 	__FR_ACT_MAX,
- };
- 
-+#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
-+
- #define FR_ACT_MAX (__FR_ACT_MAX - 1)
- 
- #endif
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -119,6 +119,8 @@ struct icmp6hdr {
- #define ICMPV6_POLICY_FAIL		5
- #define ICMPV6_REJECT_ROUTE		6
- 
-+#define ICMPV6_FAILED_POLICY		ICMPV6_POLICY_FAIL
-+
- /*
-  *	Codes for Time Exceeded
-  */
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -232,6 +232,8 @@ enum {
- 	__RTN_MAX
- };
- 
-+#define RTN_FAILED_POLICY RTN_POLICY_FAILED
-+
- #define RTN_MAX (__RTN_MAX - 1)
- 
- 
diff --git a/target/linux/generic/pending-4.19/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-4.19/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
deleted file mode 100644
index f7803f0e36..0000000000
--- a/target/linux/generic/pending-4.19/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h |  2 ++
- include/linux/skbuff.h    |  3 ++-
- net/core/dev.c            | 48 +++++++++++++++++++++++++++++++++++++++++++++++
- net/ethernet/eth.c        | 18 +++++++++++++++++-
- 4 files changed, 69 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1882,6 +1882,8 @@ struct net_device {
- 	struct netdev_hw_addr_list	mc;
- 	struct netdev_hw_addr_list	dev_addrs;
- 
-+	unsigned char		local_addr_mask[MAX_ADDR_LEN];
-+
- #ifdef CONFIG_SYSFS
- 	struct kset		*queues_kset;
- #endif
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -799,6 +799,7 @@ struct sk_buff {
- #ifdef CONFIG_TLS_DEVICE
- 	__u8			decrypted:1;
- #endif
-+	__u8			gro_skip:1;
- 
- #ifdef CONFIG_NET_SCHED
- 	__u16			tc_index;	/* traffic control index */
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -5468,6 +5468,9 @@ static enum gro_result dev_gro_receive(s
- 	int same_flow;
- 	int grow;
- 
-+	if (skb->gro_skip)
-+		goto normal;
-+
- 	if (netif_elide_gro(skb->dev))
- 		goto normal;
- 
-@@ -6962,6 +6965,48 @@ static void __netdev_adjacent_dev_unlink
- 					   &upper_dev->adj_list.lower);
- }
- 
-+static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr,
-+			       struct net_device *dev)
-+{
-+	int i;
-+
-+	for (i = 0; i < dev->addr_len; i++)
-+		mask[i] |= addr[i] ^ dev->dev_addr[i];
-+}
-+
-+static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev,
-+				struct net_device *lower)
-+{
-+	struct net_device *cur;
-+	struct list_head *iter;
-+
-+	netdev_for_each_upper_dev_rcu(dev, cur, iter) {
-+		__netdev_addr_mask(mask, cur->dev_addr, lower);
-+		__netdev_upper_mask(mask, cur, lower);
-+	}
-+}
-+
-+static void __netdev_update_addr_mask(struct net_device *dev)
-+{
-+	unsigned char mask[MAX_ADDR_LEN];
-+	struct net_device *cur;
-+	struct list_head *iter;
-+
-+	memset(mask, 0, sizeof(mask));
-+	__netdev_upper_mask(mask, dev, dev);
-+	memcpy(dev->local_addr_mask, mask, dev->addr_len);
-+
-+	netdev_for_each_lower_dev(dev, cur, iter)
-+		__netdev_update_addr_mask(cur);
-+}
-+
-+static void netdev_update_addr_mask(struct net_device *dev)
-+{
-+	rcu_read_lock();
-+	__netdev_update_addr_mask(dev);
-+	rcu_read_unlock();
-+}
-+
- static int __netdev_upper_dev_link(struct net_device *dev,
- 				   struct net_device *upper_dev, bool master,
- 				   void *upper_priv, void *upper_info,
-@@ -7009,6 +7054,7 @@ static int __netdev_upper_dev_link(struc
- 	if (ret)
- 		return ret;
- 
-+	netdev_update_addr_mask(dev);
- 	ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
- 					    &changeupper_info.info);
- 	ret = notifier_to_errno(ret);
-@@ -7095,6 +7141,7 @@ void netdev_upper_dev_unlink(struct net_
- 
- 	__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
- 
-+	netdev_update_addr_mask(dev);
- 	call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
- 				      &changeupper_info.info);
- }
-@@ -7718,6 +7765,7 @@ int dev_set_mac_address(struct net_devic
- 	if (err)
- 		return err;
- 	dev->addr_assign_type = NET_ADDR_SET;
-+	netdev_update_addr_mask(dev);
- 	call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- 	add_device_randomness(dev->dev_addr, dev->addr_len);
- 	return 0;
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -144,6 +144,18 @@ u32 eth_get_headlen(void *data, unsigned
- }
- EXPORT_SYMBOL(eth_get_headlen);
- 
-+static inline bool
-+eth_check_local_mask(const void *addr1, const void *addr2, const void *mask)
-+{
-+	const u16 *a1 = addr1;
-+	const u16 *a2 = addr2;
-+	const u16 *m = mask;
-+
-+	return (((a1[0] ^ a2[0]) & ~m[0]) |
-+		((a1[1] ^ a2[1]) & ~m[1]) |
-+		((a1[2] ^ a2[2]) & ~m[2]));
-+}
-+
- /**
-  * eth_type_trans - determine the packet's protocol ID.
-  * @skb: received socket data
-@@ -172,8 +184,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- 			skb->pkt_type = PACKET_MULTICAST;
- 	}
- 	else if (unlikely(!ether_addr_equal_64bits(eth->h_dest,
--						   dev->dev_addr)))
-+						   dev->dev_addr))) {
- 		skb->pkt_type = PACKET_OTHERHOST;
-+		if (eth_check_local_mask(eth->h_dest, dev->dev_addr,
-+					 dev->local_addr_mask))
-+			skb->gro_skip = 1;
-+	}
- 
- 	/*
- 	 * Some variants of DSA tagging don't have an ethertype field
diff --git a/target/linux/generic/pending-4.19/681-NET-add-of_get_mac_address_mtd.patch b/target/linux/generic/pending-4.19/681-NET-add-of_get_mac_address_mtd.patch
deleted file mode 100644
index 13f5640590..0000000000
--- a/target/linux/generic/pending-4.19/681-NET-add-of_get_mac_address_mtd.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From: John Crispin <blogic@openwrt.org>
-Subject: NET: add mtd-mac-address support to of_get_mac_address()
-
-Many embedded devices have information such as mac addresses stored inside mtd
-devices. This patch allows us to add a property inside a node describing a
-network interface. The new property points at a mtd partition with an offset
-where the mac address can be found.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/of/of_net.c    |   37 +++++++++++++++++++++++++++++++++++++
- include/linux/of_net.h |    1 +
- 2 files changed, 38 insertions(+)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -11,6 +11,7 @@
- #include <linux/of_net.h>
- #include <linux/phy.h>
- #include <linux/export.h>
-+#include <linux/mtd/mtd.h>
- 
- /**
-  * of_get_phy_mode - Get phy mode for given device_node
-@@ -39,7 +40,7 @@ int of_get_phy_mode(struct device_node *
- }
- EXPORT_SYMBOL_GPL(of_get_phy_mode);
- 
--static const void *of_get_mac_addr(struct device_node *np, const char *name)
-+static void *of_get_mac_addr(struct device_node *np, const char *name)
- {
- 	struct property *pp = of_find_property(np, name, NULL);
- 
-@@ -48,6 +49,79 @@ static const void *of_get_mac_addr(struc
- 	return NULL;
- }
- 
-+static const void *of_get_mac_address_mtd(struct device_node *np)
-+{
-+#ifdef CONFIG_MTD
-+	struct device_node *mtd_np = NULL;
-+	struct property *prop;
-+	size_t retlen;
-+	int size, ret;
-+	struct mtd_info *mtd;
-+	const char *part;
-+	const __be32 *list;
-+	phandle phandle;
-+	u32 mac_inc = 0;
-+	u8 mac[ETH_ALEN];
-+	void *addr;
-+	u32 inc_idx;
-+
-+	list = of_get_property(np, "mtd-mac-address", &size);
-+	if (!list || (size != (2 * sizeof(*list))))
-+		return NULL;
-+
-+	phandle = be32_to_cpup(list++);
-+	if (phandle)
-+		mtd_np = of_find_node_by_phandle(phandle);
-+
-+	if (!mtd_np)
-+		return NULL;
-+
-+	part = of_get_property(mtd_np, "label", NULL);
-+	if (!part)
-+		part = mtd_np->name;
-+
-+	mtd = get_mtd_device_nm(part);
-+	if (IS_ERR(mtd))
-+		return NULL;
-+
-+	ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, mac);
-+	put_mtd_device(mtd);
-+
-+	if (of_property_read_u32(np, "mtd-mac-address-increment-byte", &inc_idx))
-+		inc_idx = 5;
-+	if (inc_idx > 5)
-+		return NULL;
-+
-+	if (!of_property_read_u32(np, "mtd-mac-address-increment", &mac_inc))
-+		mac[inc_idx] += mac_inc;
-+
-+	if (!is_valid_ether_addr(mac))
-+		return NULL;
-+
-+	addr = of_get_mac_addr(np, "mac-address");
-+	if (addr) {
-+		memcpy(addr, mac, ETH_ALEN);
-+		return addr;
-+	}
-+
-+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-+	if (!prop)
-+		return NULL;
-+
-+	prop->name = "mac-address";
-+	prop->length = ETH_ALEN;
-+	prop->value = kmemdup(mac, ETH_ALEN, GFP_KERNEL);
-+	if (!prop->value || of_add_property(np, prop))
-+		goto free;
-+
-+	return prop->value;
-+free:
-+	kfree(prop->value);
-+	kfree(prop);
-+#endif
-+	return NULL;
-+}
-+
- /**
-  * Search the device tree for the best MAC address to use.  'mac-address' is
-  * checked first, because that is supposed to contain to "most recent" MAC
-@@ -65,11 +139,18 @@ static const void *of_get_mac_addr(struc
-  * addresses.  Some older U-Boots only initialized 'local-mac-address'.  In
-  * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
-  * but is all zeros.
-+ *
-+ * If a mtd-mac-address property exists, try to fetch the MAC address from the
-+ * specified mtd device, and store it as a 'mac-address' property
- */
- const void *of_get_mac_address(struct device_node *np)
- {
- 	const void *addr;
- 
-+	addr = of_get_mac_address_mtd(np);
-+	if (addr)
-+		return addr;
-+
- 	addr = of_get_mac_addr(np, "mac-address");
- 	if (addr)
- 		return addr;
diff --git a/target/linux/generic/pending-4.19/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-4.19/703-phy-add-detach-callback-to-struct-phy_driver.patch
deleted file mode 100644
index 0cf187a491..0000000000
--- a/target/linux/generic/pending-4.19/703-phy-add-detach-callback-to-struct-phy_driver.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: generic: add detach callback to struct phy_driver
-
-lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/phy_device.c | 3 +++
- include/linux/phy.h          | 6 ++++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1130,6 +1130,9 @@ void phy_detach(struct phy_device *phyde
- 	struct module *ndev_owner = dev->dev.parent->driver->owner;
- 	struct mii_bus *bus;
- 
-+	if (phydev->drv && phydev->drv->detach)
-+		phydev->drv->detach(phydev);
-+
- 	if (phydev->sysfs_links) {
- 		sysfs_remove_link(&dev->dev.kobj, "phydev");
- 		sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -560,6 +560,12 @@ struct phy_driver {
- 	 */
- 	int (*did_interrupt)(struct phy_device *phydev);
- 
-+	/*
-+	 * Called before an ethernet device is detached
-+	 * from the PHY.
-+	 */
-+	void (*detach)(struct phy_device *phydev);
-+
- 	/* Clears up any memory if needed */
- 	void (*remove)(struct phy_device *phydev);
- 
diff --git a/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch
deleted file mode 100644
index e56e77addf..0000000000
--- a/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: net: phy: allow to configure AR803x PHYs via platform data
-
-Add a patch for the at803x phy driver, in order to be able
-to configure some register settings via platform data.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/at803x.c                 | 56 ++++++++++++++++++++++++++++++++
- include/linux/platform_data/phy-at803x.h | 11 +++++++
- 2 files changed, 67 insertions(+)
- create mode 100644 include/linux/platform_data/phy-at803x.h
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -12,12 +12,14 @@
-  */
- 
- #include <linux/phy.h>
-+#include <linux/mdio.h>
- #include <linux/module.h>
- #include <linux/string.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
- #include <linux/of_gpio.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/platform_data/phy-at803x.h>
- 
- #define AT803X_INTR_ENABLE			0x12
- #define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
-@@ -45,6 +47,11 @@
- #define AT803X_REG_CHIP_CONFIG			0x1f
- #define AT803X_BT_BX_REG_SEL			0x8000
- 
-+#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
-+#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
-+
- #define AT803X_DEBUG_ADDR			0x1D
- #define AT803X_DEBUG_DATA			0x1E
- 
-@@ -73,6 +80,7 @@ MODULE_LICENSE("GPL");
- 
- struct at803x_priv {
- 	bool phy_reset:1;
-+	int prev_speed;
- };
- 
- struct at803x_context {
-@@ -249,8 +257,16 @@ static int at803x_probe(struct phy_devic
- 	return 0;
- }
- 
-+static void at803x_disable_smarteee(struct phy_device *phydev)
-+{
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
-+		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
-+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-+}
-+
- static int at803x_config_init(struct phy_device *phydev)
- {
-+	struct at803x_platform_data *pdata;
- 	int ret;
- 
- 	ret = genphy_config_init(phydev);
-@@ -271,6 +287,26 @@ static int at803x_config_init(struct phy
- 			return ret;
- 	}
- 
-+	pdata = dev_get_platdata(&phydev->mdio.dev);
-+	if (pdata) {
-+		if (pdata->disable_smarteee)
-+			at803x_disable_smarteee(phydev);
-+
-+		if (pdata->enable_rgmii_rx_delay)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
-+				AT803X_DEBUG_RX_CLK_DLY_EN);
-+		else
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+				AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-+
-+		if (pdata->enable_rgmii_tx_delay)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-+				AT803X_DEBUG_TX_CLK_DLY_EN);
-+		else
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+	}
-+
- 	return 0;
- }
- 
-@@ -308,6 +344,8 @@ static int at803x_config_intr(struct phy
- static void at803x_link_change_notify(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-+	struct at803x_platform_data *pdata;
-+	pdata = dev_get_platdata(&phydev->mdio.dev);
- 
- 	/*
- 	 * Conduct a hardware reset for AT8030/2 every time a link loss is
-@@ -336,6 +374,24 @@ static void at803x_link_change_notify(st
- 	} else {
- 		priv->phy_reset = false;
- 	}
-+	if (pdata && pdata->fixup_rgmii_tx_delay &&
-+	    phydev->speed != priv->prev_speed) {
-+		switch (phydev->speed) {
-+		case SPEED_10:
-+		case SPEED_100:
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-+				AT803X_DEBUG_TX_CLK_DLY_EN);
-+			break;
-+		case SPEED_1000:
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		priv->prev_speed = phydev->speed;
-+	}
- }
- 
- static int at803x_aneg_done(struct phy_device *phydev)
---- /dev/null
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -0,0 +1,11 @@
-+#ifndef _PHY_AT803X_PDATA_H
-+#define _PHY_AT803X_PDATA_H
-+
-+struct at803x_platform_data {
-+	int disable_smarteee:1;
-+	int enable_rgmii_tx_delay:1;
-+	int enable_rgmii_rx_delay:1;
-+	int fixup_rgmii_tx_delay:1;
-+};
-+
-+#endif /* _PHY_AT803X_PDATA_H */
diff --git a/target/linux/generic/pending-4.19/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/pending-4.19/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
deleted file mode 100644
index 1f81b37f71..0000000000
--- a/target/linux/generic/pending-4.19/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Roman Yeryomin <roman@advem.lv>
-Subject: kernel: add at803x fix for sgmii mode
-
-Some (possibly broken) bootloaders incorreclty initialize at8033
-phy. This patch enables sgmii autonegotiation mode.
-
-[john@phrozen.org: felix added this to his upstream queue]
-
-Signed-off-by: Roman Yeryomin <roman@advem.lv>
----
- drivers/net/phy/at803x.c | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -46,6 +46,7 @@
- #define AT803X_FUNC_DATA			0x4003
- #define AT803X_REG_CHIP_CONFIG			0x1f
- #define AT803X_BT_BX_REG_SEL			0x8000
-+#define AT803X_SGMII_ANEG_EN			0x1000
- 
- #define AT803X_PCS_SMART_EEE_CTRL3			0x805D
- #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
-@@ -268,6 +269,27 @@ static int at803x_config_init(struct phy
- {
- 	struct at803x_platform_data *pdata;
- 	int ret;
-+	u32 v;
-+
-+	if (phydev->drv->phy_id == ATH8031_PHY_ID &&
-+		phydev->interface == PHY_INTERFACE_MODE_SGMII)
-+	{
-+		v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+		/* select SGMII/fiber page */
-+		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+						v & ~AT803X_BT_BX_REG_SEL);
-+		if (ret)
-+			return ret;
-+		/* enable SGMII autonegotiation */
-+		ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
-+		if (ret)
-+			return ret;
-+		/* select copper page */
-+		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+						v | AT803X_BT_BX_REG_SEL);
-+		if (ret)
-+			return ret;
-+	}
- 
- 	ret = genphy_config_init(phydev);
- 	if (ret < 0)
diff --git a/target/linux/generic/pending-4.19/736-net-phy-at803x-allow-to-configure-via-dt.patch b/target/linux/generic/pending-4.19/736-net-phy-at803x-allow-to-configure-via-dt.patch
deleted file mode 100644
index 496700f377..0000000000
--- a/target/linux/generic/pending-4.19/736-net-phy-at803x-allow-to-configure-via-dt.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -329,6 +329,14 @@ static int at803x_config_init(struct phy
- 				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
- 	}
- 
-+#ifdef CONFIG_OF_MDIO
-+	if (phydev->mdio.dev.of_node &&
-+		of_property_read_bool(phydev->mdio.dev.of_node,
-+				      "at803x-disable-smarteee")) {
-+		at803x_disable_smarteee(phydev);
-+	}
-+#endif
-+
- 	return 0;
- }
- 
-@@ -367,6 +375,7 @@ static void at803x_link_change_notify(st
- {
- 	struct at803x_priv *priv = phydev->priv;
- 	struct at803x_platform_data *pdata;
-+	u8 fixup_rgmii_tx_delay = 0;
- 	pdata = dev_get_platdata(&phydev->mdio.dev);
- 
- 	/*
-@@ -396,8 +405,19 @@ static void at803x_link_change_notify(st
- 	} else {
- 		priv->phy_reset = false;
- 	}
--	if (pdata && pdata->fixup_rgmii_tx_delay &&
--	    phydev->speed != priv->prev_speed) {
-+
-+	if (pdata && pdata->fixup_rgmii_tx_delay)
-+		fixup_rgmii_tx_delay = 1;
-+
-+#ifdef CONFIG_OF_MDIO
-+	if (phydev->mdio.dev.of_node &&
-+		of_property_read_bool(phydev->mdio.dev.of_node,
-+				      "at803x-fixup-rgmii-tx-delay")) {
-+			fixup_rgmii_tx_delay = 1;
-+	}
-+#endif
-+
-+	if (fixup_rgmii_tx_delay && phydev->speed != priv->prev_speed) {
- 		switch (phydev->speed) {
- 		case SPEED_10:
- 		case SPEED_100:
diff --git a/target/linux/generic/pending-4.19/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch b/target/linux/generic/pending-4.19/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
deleted file mode 100644
index cb02c71829..0000000000
--- a/target/linux/generic/pending-4.19/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] bcma: get SoC device struct & copy its DMA params to the
- subdevices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For bus devices to be fully usable it's required to set their DMA
-parameters.
-
-For years it has been missing and remained unnoticed because of
-mips_dma_alloc_coherent() silently handling the empty coherent_dma_mask.
-Kernel 4.19 came with a lot of DMA changes and caused a regression on
-the bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic
-dma noncoherent ops for simple noncoherent platforms") DMA coherent
-allocations just fail. Example:
-[    1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed
-[    1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA
-[    1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12
-[    1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
-
-This change fixes above regression in addition to the MIPS bcm47xx
-commit 321c46b91550 ("MIPS: BCM47XX: Setup struct device for the SoC").
-
-It also fixes another *old* GPIO regression caused by a parent pointing
-to the NULL:
-[    0.157054] missing gpiochip .dev parent pointer
-[    0.157287] bcma: bus0: Error registering GPIO driver: -22
-introduced by the commit 74f4e0cc6108 ("bcma: switch GPIO portions to
-use GPIOLIB_IRQCHIP").
-
-Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
-Fixes: 74f4e0cc6108 ("bcma: switch GPIO portions to use GPIOLIB_IRQCHIP")
-Cc: linux-mips@linux-mips.org
-Cc: Christoph Hellwig <hch@lst.de>
-Cc: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/bcma/host_soc.c
-+++ b/drivers/bcma/host_soc.c
-@@ -191,6 +191,8 @@ int __init bcma_host_soc_init(struct bcm
- 	struct bcma_bus *bus = &soc->bus;
- 	int err;
- 
-+	bus->dev = soc->dev;
-+
- 	/* Scan bus and initialize it */
- 	err = bcma_bus_early_register(bus);
- 	if (err)
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -236,12 +236,16 @@ EXPORT_SYMBOL(bcma_core_irq);
- 
- void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
- {
-+	struct device *dev = &core->dev;
-+
- 	core->dev.release = bcma_release_core_dev;
- 	core->dev.bus = &bcma_bus_type;
- 	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
- 	core->dev.parent = bus->dev;
--	if (bus->dev)
-+	if (bus->dev) {
- 		bcma_of_fill_device(bus->dev, core);
-+		dma_coerce_mask_and_coherent(dev, bus->dev->coherent_dma_mask);
-+	}
- 
- 	switch (bus->hosttype) {
- 	case BCMA_HOSTTYPE_PCI:
diff --git a/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch
deleted file mode 100644
index c8c28b5175..0000000000
--- a/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: debloat: add kernel config option to disabling common PCI quirks
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/pci/Kconfig  | 6 ++++++
- drivers/pci/quirks.c | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -89,6 +89,13 @@ config XEN_PCIDEV_FRONTEND
-           The PCI device frontend driver allows the kernel to import arbitrary
-           PCI devices from a PCI backend to support PCI driver domains.
- 
-+config PCI_DISABLE_COMMON_QUIRKS
-+	bool "PCI disable common quirks"
-+	depends on PCI
-+	help
-+	  If you don't know what to do here, say N.
-+
-+
- config PCI_ATS
- 	bool
- 
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -207,6 +207,7 @@ static void quirk_mmio_always_on(struct
- DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
- 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /*
-  * The Mellanox Tavor device gives false positive parity errors.  Mark this
-  * device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3152,6 +3153,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
-  * To work around this, query the size it should be configured to by the
-@@ -3177,6 +3180,8 @@ static void quirk_intel_ntb(struct pci_d
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- /*
-  * Some BIOS implementations leave the Intel GPU interrupts enabled, even
-  * though no one is handling them (e.g., if the i915 driver is never
-@@ -3215,6 +3220,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * PCI devices which are on Intel chips can skip the 10ms delay
-  * before entering D3 mode.
diff --git a/target/linux/generic/pending-4.19/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-4.19/811-pci_disable_usb_common_quirks.patch
deleted file mode 100644
index 7d36af7d26..0000000000
--- a/target/linux/generic/pending-4.19/811-pci_disable_usb_common_quirks.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: debloat: disable common USB quirks
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
- drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++-
- include/linux/usb/hcd.h       |  7 +++++++
- 3 files changed, 40 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/pci-quirks.c
-+++ b/drivers/usb/host/pci-quirks.c
-@@ -125,6 +125,8 @@ struct amd_chipset_type {
- 	u8 rev;
- };
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static struct amd_chipset_info {
- 	struct pci_dev	*nb_dev;
- 	struct pci_dev	*smbus_dev;
-@@ -621,6 +623,10 @@ bool usb_amd_pt_check_port(struct device
- }
- EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
- 
-+#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
-+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
-+
- /*
-  * Make sure the controller is completely inactive, unable to
-  * generate interrupts or do DMA.
-@@ -700,8 +706,17 @@ reset_needed:
- 	uhci_reset_hc(pdev, base);
- 	return 1;
- }
-+#else
-+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
-+{
-+	return 0;
-+}
-+
-+#endif
- EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
- {
- 	u16 cmd;
-@@ -1268,3 +1283,4 @@ static void quirk_usb_early_handoff(stru
- }
- DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
- 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
-+#endif
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -5,6 +5,9 @@
- #ifdef CONFIG_USB_PCI
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-+#endif  /* CONFIG_USB_PCI */
-+
-+#if defined(CONFIG_USB_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
- int usb_amd_find_chipset_info(void);
- int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
- bool usb_amd_hang_symptom_quirk(void);
-@@ -19,6 +22,18 @@ void sb800_prefetch(struct device *dev,
- bool usb_amd_pt_check_port(struct device *device, int port);
- #else
- struct pci_dev;
-+static inline int usb_amd_find_chipset_info(void)
-+{
-+	return 0;
-+}
-+static inline bool usb_amd_hang_symptom_quirk(void)
-+{
-+	return false;
-+}
-+static inline bool usb_amd_prefetch_quirk(void)
-+{
-+	return false;
-+}
- static inline void usb_amd_quirk_pll_disable(void) {}
- static inline void usb_amd_quirk_pll_enable(void) {}
- static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
-@@ -29,6 +44,11 @@ static inline bool usb_amd_pt_check_port
- {
- 	return false;
- }
-+static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
-+static inline bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
-+{
-+	return false;
-+}
- #endif  /* CONFIG_USB_PCI */
- 
- #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -473,7 +473,14 @@ extern int usb_hcd_pci_probe(struct pci_
- extern void usb_hcd_pci_remove(struct pci_dev *dev);
- extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
-+#else
-+static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
-+{
-+	return 0;
-+}
-+#endif
- 
- #ifdef CONFIG_PM
- extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
diff --git a/target/linux/generic/pending-4.19/834-ledtrig-libata.patch b/target/linux/generic/pending-4.19/834-ledtrig-libata.patch
deleted file mode 100644
index 70d3de05d0..0000000000
--- a/target/linux/generic/pending-4.19/834-ledtrig-libata.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: libata: add ledtrig support
-
-This adds a LED trigger for each ATA port indicating disk activity.
-
-As this is needed only on specific platforms (NAS SoCs and such),
-these platforms should define ARCH_WANTS_LIBATA_LEDS if there
-are boards with LED(s) intended to indicate ATA disk activity and
-need the OS to take care of that.
-In that way, if not selected, LED trigger support not will be
-included in libata-core and both, codepaths and structures remain
-untouched.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/ata/Kconfig       | 16 ++++++++++++++++
- drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
- include/linux/libata.h    |  9 +++++++++
- 3 files changed, 66 insertions(+)
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR
- 
- 	  If unsure, say Y.
- 
-+config ARCH_WANT_LIBATA_LEDS
-+	bool
-+
-+config ATA_LEDS
-+	bool "support ATA port LED triggers"
-+	depends on ARCH_WANT_LIBATA_LEDS
-+	select NEW_LEDS
-+	select LEDS_CLASS
-+	select LEDS_TRIGGERS
-+	default y
-+	help
-+	  This option adds a LED trigger for each registered ATA port.
-+	  It is used to drive disk activity leds connected via GPIO.
-+
-+	  If unsure, say N.
-+
- config ATA_ACPI
- 	bool "ATA ACPI Support"
- 	depends on ACPI
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -731,6 +731,19 @@ u64 ata_tf_read_block(const struct ata_t
- 	return block;
- }
- 
-+#ifdef CONFIG_ATA_LEDS
-+#define LIBATA_BLINK_DELAY 20 /* ms */
-+static inline void ata_led_act(struct ata_port *ap)
-+{
-+	unsigned long led_delay = LIBATA_BLINK_DELAY;
-+
-+	if (unlikely(!ap->ledtrig))
-+		return;
-+
-+	led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
-+}
-+#endif
-+
- /**
-  *	ata_build_rw_tf - Build ATA taskfile for given read/write request
-  *	@tf: Target ATA taskfile
-@@ -5131,6 +5144,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
- 		if (tag < 0)
- 			return NULL;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	ata_led_act(ap);
-+#endif
- 
- 	qc = __ata_qc_from_tag(ap, tag);
- 	qc->tag = qc->hw_tag = tag;
-@@ -6041,6 +6057,9 @@ struct ata_port *ata_port_alloc(struct a
- 	ap->stats.unhandled_irq = 1;
- 	ap->stats.idle_irq = 1;
- #endif
-+#ifdef CONFIG_ATA_LEDS
-+	ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
-+#endif
- 	ata_sff_port_init(ap);
- 
- 	return ap;
-@@ -6076,6 +6095,12 @@ static void ata_host_release(struct kref
- 
- 		kfree(ap->pmp_link);
- 		kfree(ap->slave_link);
-+#ifdef CONFIG_ATA_LEDS
-+		if (ap->ledtrig) {
-+			led_trigger_unregister(ap->ledtrig);
-+			kfree(ap->ledtrig);
-+		};
-+#endif
- 		kfree(ap);
- 		host->ports[i] = NULL;
- 	}
-@@ -6539,7 +6564,23 @@ int ata_host_register(struct ata_host *h
- 		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
- 		host->ports[i]->local_port_no = i + 1;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	for (i = 0; i < host->n_ports; i++) {
-+		if (unlikely(!host->ports[i]->ledtrig))
-+			continue;
- 
-+		snprintf(host->ports[i]->ledtrig_name,
-+			sizeof(host->ports[i]->ledtrig_name), "ata%u",
-+			host->ports[i]->print_id);
-+
-+		host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
-+
-+		if (led_trigger_register(host->ports[i]->ledtrig)) {
-+			kfree(host->ports[i]->ledtrig);
-+			host->ports[i]->ledtrig = NULL;
-+		}
-+	}
-+#endif
- 	/* Create associated sysfs transport objects  */
- 	for (i = 0; i < host->n_ports; i++) {
- 		rc = ata_tport_add(host->dev,host->ports[i]);
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -38,6 +38,9 @@
- #include <linux/acpi.h>
- #include <linux/cdrom.h>
- #include <linux/sched.h>
-+#ifdef CONFIG_ATA_LEDS
-+#include <linux/leds.h>
-+#endif
- 
- /*
-  * Define if arch has non-standard setup.  This is a _PCI_ standard
-@@ -893,6 +896,12 @@ struct ata_port {
- #ifdef CONFIG_ATA_ACPI
- 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
- #endif
-+
-+#ifdef CONFIG_ATA_LEDS
-+	struct led_trigger	*ledtrig;
-+	char			ledtrig_name[8];
-+#endif
-+
- 	/* owned by EH */
- 	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
- };
diff --git a/target/linux/generic/pending-4.19/840-media-i2c-tda1997x-select-V4L2_FWNODE.patch b/target/linux/generic/pending-4.19/840-media-i2c-tda1997x-select-V4L2_FWNODE.patch
deleted file mode 100644
index 65fcfb5bfe..0000000000
--- a/target/linux/generic/pending-4.19/840-media-i2c-tda1997x-select-V4L2_FWNODE.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 237e88dcbcb0098e1a8a0887fb7299fcf18650a5 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Mon, 18 Mar 2019 17:39:26 +0100
-Subject: [PATCH] media: i2c: tda1997x: select V4L2_FWNODE
-
-Building tda1997x fails now unless V4L2_FWNODE is selected:
-
-drivers/media/i2c/tda1997x.o: in function `tda1997x_parse_dt'
-undefined reference to `v4l2_fwnode_endpoint_parse'
-
-While at it, also sort the selections alphabetically
-
-Fixes: 9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Cc: Akinobu Mita <akinobu.mita@gmail.com>
-Cc: Bingbu Cao <bingbu.cao@intel.com>
-Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
-Cc: Matt Ranostay <matt.ranostay@konsulko.com>
-Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
-Cc: Robin Leblon <robin.leblon@ncentric.com>
-Cc: Rui Miguel Silva <rui.silva@linaro.org>
-Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
-Cc: Tim Harvey <tharvey@gateworks.com>
-Cc: linux-kernel@vger.kernel.org
-Cc: stable@vger.kernel.org # v4.17+
----
- drivers/media/i2c/Kconfig | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/media/i2c/Kconfig
-+++ b/drivers/media/i2c/Kconfig
-@@ -60,8 +60,9 @@ config VIDEO_TDA1997X
- 	tristate "NXP TDA1997x HDMI receiver"
- 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- 	depends on SND_SOC
--	select SND_PCM
- 	select HDMI
-+	select SND_PCM
-+	select V4L2_FWNODE
- 	---help---
- 	  V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
- 
diff --git a/target/linux/generic/pending-4.19/920-mangle_bootargs.patch b/target/linux/generic/pending-4.19/920-mangle_bootargs.patch
deleted file mode 100644
index 51af6b5d6b..0000000000
--- a/target/linux/generic/pending-4.19/920-mangle_bootargs.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
-
-Enabling this option renames the bootloader supplied root=
-and rootfstype= variables, which might have to be know but
-would break the automatisms OpenWrt uses.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- init/Kconfig |  9 +++++++++
- init/main.c  | 24 ++++++++++++++++++++++++
- 2 files changed, 33 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1531,6 +1531,15 @@ config EMBEDDED
- 	  an embedded system so certain expert options are available
- 	  for configuration.
- 
-+config MANGLE_BOOTARGS
-+	bool "Rename offending bootargs"
-+	depends on EXPERT
-+	help
-+	  Sometimes the bootloader passed bogus root= and rootfstype=
-+	  parameters to the kernel, and while you want to ignore them,
-+	  you need to know the values f.e. to support dual firmware
-+	  layouts on the flash.
-+
- config HAVE_PERF_EVENTS
- 	bool
- 	help
---- a/init/main.c
-+++ b/init/main.c
-@@ -366,6 +366,29 @@ static inline void setup_nr_cpu_ids(void
- static inline void smp_prepare_cpus(unsigned int maxcpus) { }
- #endif
- 
-+#ifdef CONFIG_MANGLE_BOOTARGS
-+static void __init mangle_bootargs(char *command_line)
-+{
-+	char *rootdev;
-+	char *rootfs;
-+
-+	rootdev = strstr(command_line, "root=/dev/mtdblock");
-+
-+	if (rootdev)
-+		strncpy(rootdev, "mangled_rootblock=", 18);
-+
-+	rootfs = strstr(command_line, "rootfstype");
-+
-+	if (rootfs)
-+		strncpy(rootfs, "mangled_fs", 10);
-+
-+}
-+#else
-+static void __init mangle_bootargs(char *command_line)
-+{
-+}
-+#endif
-+
- /*
-  * We need to store the untouched command line for future reference.
-  * We also need to store the touched command line since the parameter
-@@ -558,6 +581,7 @@ asmlinkage __visible void __init start_k
- 	add_device_randomness(command_line, strlen(command_line));
- 	boot_init_stack_canary();
- 	mm_init_cpumask(&init_mm);
-+	mangle_bootargs(command_line);
- 	setup_command_line(command_line);
- 	setup_nr_cpu_ids();
- 	setup_per_cpu_areas();
diff --git a/target/linux/generic/pending-4.9/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch b/target/linux/generic/pending-4.9/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
deleted file mode 100644
index 524c6f98df..0000000000
--- a/target/linux/generic/pending-4.9/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 18 Feb 2018 17:08:04 +0100
-Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio
-
-In devices, where fdt is used, is impossible to apply platform data
-without proper fdt node.
-
-This patch allow to use platform data in devices with fdt.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/w1/masters/w1-gpio.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/w1/masters/w1-gpio.c
-+++ b/drivers/w1/masters/w1-gpio.c
-@@ -113,17 +113,16 @@ static int w1_gpio_probe_dt(struct platf
- static int w1_gpio_probe(struct platform_device *pdev)
- {
- 	struct w1_bus_master *master;
--	struct w1_gpio_platform_data *pdata;
-+	struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
- 	int err;
- 
--	if (of_have_populated_dt()) {
-+	if (of_have_populated_dt() && !pdata) {
- 		err = w1_gpio_probe_dt(pdev);
- 		if (err < 0)
- 			return err;
-+		pdata = dev_get_platdata(&pdev->dev);
- 	}
- 
--	pdata = dev_get_platdata(&pdev->dev);
--
- 	if (!pdata) {
- 		dev_err(&pdev->dev, "No configuration data\n");
- 		return -ENXIO;
diff --git a/target/linux/generic/pending-4.9/100-MIPS-fix-cache-flushing-for-highmem-pages.patch b/target/linux/generic/pending-4.9/100-MIPS-fix-cache-flushing-for-highmem-pages.patch
deleted file mode 100644
index 622fab65b7..0000000000
--- a/target/linux/generic/pending-4.9/100-MIPS-fix-cache-flushing-for-highmem-pages.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: MIPS: fix cache flushing for highmem pages
-
-Most cache flush ops were no-op for highmem pages. This led to nasty
-segfaults and (in the case of page_address(page) == NULL) kernel
-crashes.
-
-Fix this by always flushing highmem pages using kmap/kunmap_atomic
-around the actual cache flush. This might be a bit inefficient, but at
-least it's stable.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -115,6 +115,13 @@ void __flush_anon_page(struct page *page
- {
- 	unsigned long addr = (unsigned long) page_address(page);
- 
-+	if (PageHighMem(page)) {
-+		addr = (unsigned long)kmap_atomic(page);
-+		flush_data_cache_page(addr);
-+		__kunmap_atomic((void *)addr);
-+		return;
-+	}
-+
- 	if (pages_do_alias(addr, vmaddr)) {
- 		if (page_mapcount(page) && !Page_dcache_dirty(page)) {
- 			void *kaddr;
diff --git a/target/linux/generic/pending-4.9/110-ehci_hcd_ignore_oc.patch b/target/linux/generic/pending-4.9/110-ehci_hcd_ignore_oc.patch
deleted file mode 100644
index 644d936574..0000000000
--- a/target/linux/generic/pending-4.9/110-ehci_hcd_ignore_oc.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Florian Fainelli <florian@openwrt.org>
-Subject: USB: EHCI: add ignore_oc flag to disable overcurrent checking
-
-This patch adds an ignore_oc flag which can be set by EHCI controller
-not supporting or wanting to disable overcurrent checking. The EHCI
-platform data in include/linux/usb/ehci_pdriver.h is also augmented to
-take advantage of this new flag.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      |    2 +-
- drivers/usb/host/ehci-hub.c      |    4 ++--
- drivers/usb/host/ehci-platform.c |    1 +
- drivers/usb/host/ehci.h          |    1 +
- include/linux/usb/ehci_pdriver.h |    1 +
- 5 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -651,7 +651,7 @@ static int ehci_run (struct usb_hcd *hcd
- 		"USB %x.%x started, EHCI %x.%02x%s\n",
- 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- 		temp >> 8, temp & 0xff,
--		ignore_oc ? ", overcurrent ignored" : "");
-+		(ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
- 
- 	ehci_writel(ehci, INTR_MASK,
- 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -638,7 +638,7 @@ ehci_hub_status_data (struct usb_hcd *hc
- 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
- 	 * PORT_POWER; that's surprising, but maybe within-spec.
- 	 */
--	if (!ignore_oc)
-+	if (!ignore_oc && !ehci->ignore_oc)
- 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
- 	else
- 		mask = PORT_CSC | PORT_PEC;
-@@ -1008,7 +1008,7 @@ int ehci_hub_control(
- 		if (temp & PORT_PEC)
- 			status |= USB_PORT_STAT_C_ENABLE << 16;
- 
--		if ((temp & PORT_OCC) && !ignore_oc){
-+		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
- 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
- 
- 			/*
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -259,6 +259,8 @@ static int ehci_platform_probe(struct pl
- 		hcd->has_tt = 1;
- 	if (pdata->reset_on_resume)
- 		priv->reset_on_resume = true;
-+	if (pdata->ignore_oc)
-+		ehci->ignore_oc = 1;
- 
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- 	if (ehci->big_endian_mmio) {
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -230,6 +230,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
- 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
- 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
-+	unsigned		ignore_oc:1;
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -49,6 +49,7 @@ struct usb_ehci_pdata {
- 	unsigned	no_io_watchdog:1;
- 	unsigned	reset_on_resume:1;
- 	unsigned	dma_mask_64:1;
-+	unsigned	ignore_oc:1;
- 
- 	/* Turn on all power and clocks */
- 	int (*power_on)(struct platform_device *pdev);
diff --git a/target/linux/generic/pending-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
deleted file mode 100644
index d010445bcb..0000000000
--- a/target/linux/generic/pending-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation
-
-An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any
-kernel beyond version 4.3 resulting in:
-
-BUG: Bad page state in process swapper  pfn:086ac
-
-bisect resulted in:
-
-a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit
-commit a1c34a3bf00af2cede839879502e12dc68491ad5
-Author: Laura Abbott <laura@labbott.name>
-Date:   Thu Nov 5 18:48:46 2015 -0800
-
-    mm: Don't offset memmap for flatmem
-
-    Srinivas Kandagatla reported bad page messages when trying to remove the
-    bottom 2MB on an ARM based IFC6410 board
-
-      BUG: Bad page state in process swapper  pfn:fffa8
-      page:ef7fb500 count:0 mapcount:0 mapping:  (null) index:0x0
-      flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked)
-      page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
-      bad because of flags:
-      flags: 0x200041(locked|active|mlocked)
-      Modules linked in:
-      CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty
-#816
-      Hardware name: Qualcomm (Flattened Device Tree)
-        unwind_backtrace
-        show_stack
-        dump_stack
-        bad_page
-        free_pages_prepare
-        free_hot_cold_page
-        __free_pages
-        free_highmem_page
-        mem_init
-        start_kernel
-      Disabling lock debugging due to kernel taint
-    [...]
-:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4
-0a8156f848733dfa21e16c196dfb6c0a76290709 M      mm
-
-This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by
-page_to_pfn anymore.
-
-The following output was generated with two hacked in printk statements:
-
-printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map -
-(pgdat->node_start_pfn - ARCH_PFN_OFFSET));
-		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
-			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
-printk("after %p\n", mem_map);
-
-Output:
-
-[    0.000000] before 8861b280 vs. 8861b280 or 8851b280
-[    0.000000] after 8851b280
-
-As seen in the first line mem_map with subtraction of offset does not equal the
-mem_map after subtraction of ARCH_PFN_OFFSET.
-
-After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the
-previously calculated offset is zero for the named platform it is able to boot
-4.4 and 4.9-rc7 again.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -5922,7 +5922,7 @@ static void __ref alloc_node_mem_map(str
- 		mem_map = NODE_DATA(0)->node_mem_map;
- #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
- 		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
--			mem_map -= offset;
-+			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
- #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
- 	}
- #endif
diff --git a/target/linux/generic/pending-4.9/130-add-linux-spidev-compatible-si3210.patch b/target/linux/generic/pending-4.9/130-add-linux-spidev-compatible-si3210.patch
deleted file mode 100644
index b3de75fbbe..0000000000
--- a/target/linux/generic/pending-4.9/130-add-linux-spidev-compatible-si3210.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Giuseppe Lippolis <giu.lippolis@gmail.com>
-Subject: Add the linux,spidev compatible in spidev Several device in ramips have this binding in the dts
-
-Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
----
- drivers/spi/spidev.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -696,6 +696,7 @@ static struct class *spidev_class;
- static const struct of_device_id spidev_dt_ids[] = {
- 	{ .compatible = "rohm,dh2228fv" },
- 	{ .compatible = "lineartechnology,ltc2488" },
-+	{ .compatible = "siliconlabs,si3210" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/target/linux/generic/pending-4.9/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch b/target/linux/generic/pending-4.9/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
deleted file mode 100644
index 8c2d68b9db..0000000000
--- a/target/linux/generic/pending-4.9/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: spi: use gpio_set_value_cansleep for setting chipselect GPIO
-
-Sleeping is safe inside spi_transfer_one_message, and some GPIO chips
-need to sleep for setting values
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -700,7 +700,7 @@ static void spi_set_cs(struct spi_device
- 		enable = !enable;
- 
- 	if (gpio_is_valid(spi->cs_gpio))
--		gpio_set_value(spi->cs_gpio, !enable);
-+		gpio_set_value_cansleep(spi->cs_gpio, !enable);
- 	else if (spi->master->set_cs)
- 		spi->master->set_cs(spi, !enable);
- }
diff --git a/target/linux/generic/pending-4.9/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-4.9/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
deleted file mode 100644
index c97e93250b..0000000000
--- a/target/linux/generic/pending-4.9/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support
-
-It is required for renames on overlayfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -752,6 +752,24 @@ static int jffs2_mknod (struct inode *di
- 	return ret;
- }
- 
-+static int jffs2_whiteout (struct inode *old_dir, struct dentry *old_dentry)
-+{
-+	struct dentry *wh;
-+	int err;
-+
-+	wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
-+	if (!wh)
-+		return -ENOMEM;
-+
-+	err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE,
-+			  WHITEOUT_DEV);
-+	if (err)
-+		return err;
-+
-+	d_rehash(wh);
-+	return 0;
-+}
-+
- static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
- 			 struct inode *new_dir_i, struct dentry *new_dentry,
- 			 unsigned int flags)
-@@ -762,7 +780,7 @@ static int jffs2_rename (struct inode *o
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~RENAME_NOREPLACE)
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
- 		return -EINVAL;
- 
- 	/* The VFS will check for us and prevent trying to rename a
-@@ -828,9 +846,14 @@ static int jffs2_rename (struct inode *o
- 	if (d_is_dir(old_dentry) && !victim_f)
- 		inc_nlink(new_dir_i);
- 
--	/* Unlink the original */
--	ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
--			      old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
-+	if (flags & RENAME_WHITEOUT)
-+		/* Replace with whiteout */
-+		ret = jffs2_whiteout(old_dir_i, old_dentry);
-+	else
-+		/* Unlink the original */
-+		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-+				      old_dentry->d_name.name,
-+				      old_dentry->d_name.len, NULL, now);
- 
- 	/* We don't touch inode->i_nlink */
- 
diff --git a/target/linux/generic/pending-4.9/141-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-4.9/141-jffs2-add-RENAME_EXCHANGE-support.patch
deleted file mode 100644
index 093a73ab66..0000000000
--- a/target/linux/generic/pending-4.9/141-jffs2-add-RENAME_EXCHANGE-support.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: add RENAME_EXCHANGE support
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -777,18 +777,31 @@ static int jffs2_rename (struct inode *o
- 	int ret;
- 	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
- 	struct jffs2_inode_info *victim_f = NULL;
-+	struct inode *fst_inode = d_inode(old_dentry);
-+	struct inode *snd_inode = d_inode(new_dentry);
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE))
- 		return -EINVAL;
- 
-+	if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) {
-+		if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) {
-+			inc_nlink(new_dir_i);
-+			drop_nlink(old_dir_i);
-+		}
-+		else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) {
-+			drop_nlink(new_dir_i);
-+			inc_nlink(old_dir_i);
-+		}
-+	}
-+
- 	/* The VFS will check for us and prevent trying to rename a
- 	 * file over a directory and vice versa, but if it's a directory,
- 	 * the VFS can't check whether the victim is empty. The filesystem
- 	 * needs to do that for itself.
- 	 */
--	if (d_really_is_positive(new_dentry)) {
-+	if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) {
- 		victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
- 		if (d_is_dir(new_dentry)) {
- 			struct jffs2_full_dirent *fd;
-@@ -823,7 +836,7 @@ static int jffs2_rename (struct inode *o
- 	if (ret)
- 		return ret;
- 
--	if (victim_f) {
-+	if (victim_f && !(flags & RENAME_EXCHANGE)) {
- 		/* There was a victim. Kill it off nicely */
- 		if (d_is_dir(new_dentry))
- 			clear_nlink(d_inode(new_dentry));
-@@ -849,6 +862,12 @@ static int jffs2_rename (struct inode *o
- 	if (flags & RENAME_WHITEOUT)
- 		/* Replace with whiteout */
- 		ret = jffs2_whiteout(old_dir_i, old_dentry);
-+	else if (flags & RENAME_EXCHANGE)
-+		/* Replace the original */
-+		ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
-+				    d_inode(new_dentry)->i_ino, type,
-+				    old_dentry->d_name.name, old_dentry->d_name.len,
-+				    now);
- 	else
- 		/* Unlink the original */
- 		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -880,7 +899,7 @@ static int jffs2_rename (struct inode *o
- 		return ret;
- 	}
- 
--	if (d_is_dir(old_dentry))
-+	if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
- 		drop_nlink(old_dir_i);
- 
- 	new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
diff --git a/target/linux/generic/pending-4.9/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-4.9/150-bridge_allow_receiption_on_disabled_port.patch
deleted file mode 100644
index 9ee93c9a1d..0000000000
--- a/target/linux/generic/pending-4.9/150-bridge_allow_receiption_on_disabled_port.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Stephen Hemminger <stephen@networkplumber.org>
-Subject: bridge: allow receiption on disabled port
-
-When an ethernet device is enslaved to a bridge, and the bridge STP
-detects loss of carrier (or operational state down), then normally
-packet receiption is blocked.
-
-This breaks control applications like WPA which maybe expecting to
-receive packets to negotiate to bring link up. The bridge needs to
-block forwarding packets from these disabled ports, but there is no
-hard requirement to not allow local packet delivery.
-
-Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -231,7 +231,10 @@ static void __br_handle_local_finish(str
- /* note: already called with rcu_read_lock */
- static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
- {
--	__br_handle_local_finish(skb);
-+	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
-+
-+	if (p->state != BR_STATE_DISABLED)
-+		__br_handle_local_finish(skb);
- 
- 	/* return 1 to signal the okfn() was called so it's ok to use the skb */
- 	return 1;
-@@ -321,6 +324,17 @@ rx_handler_result_t br_handle_frame(stru
- 
- forward:
- 	switch (p->state) {
-+	case BR_STATE_DISABLED:
-+		if (ether_addr_equal(p->br->dev->dev_addr, dest))
-+			skb->pkt_type = PACKET_HOST;
-+
-+		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
-+			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
-+			br_handle_local_finish) == 1) {
-+			return RX_HANDLER_PASS;
-+		}
-+		break;
-+
- 	case BR_STATE_FORWARDING:
- 		rhook = rcu_dereference(br_should_route_hook);
- 		if (rhook) {
diff --git a/target/linux/generic/pending-4.9/161-mtd-part-add-generic-parsing-of-linux-part-probe.patch b/target/linux/generic/pending-4.9/161-mtd-part-add-generic-parsing-of-linux-part-probe.patch
deleted file mode 100644
index 1b6290fca2..0000000000
--- a/target/linux/generic/pending-4.9/161-mtd-part-add-generic-parsing-of-linux-part-probe.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Subject: mtd: part: add generic parsing of linux,part-probe
-
-This moves the linux,part-probe device tree parsing code from
-physmap_of.c to mtdpart.c. Now all drivers can use this feature by just
-providing a reference to their device tree node in struct
-mtd_part_parser_data.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- Documentation/devicetree/bindings/mtd/nand.txt | 16 +++++++++
- drivers/mtd/maps/physmap_of.c                  | 46 +-------------------------
- drivers/mtd/mtdpart.c                          | 45 +++++++++++++++++++++++++
- 3 files changed, 62 insertions(+), 45 deletions(-)
-
---- a/Documentation/devicetree/bindings/mtd/nand.txt
-+++ b/Documentation/devicetree/bindings/mtd/nand.txt
-@@ -44,6 +44,22 @@ Optional NAND chip properties:
- 		     used by the upper layers, and you want to make your NAND
- 		     as reliable as possible.
- 
-+- linux,part-probe: list of name as strings of the partition parser
-+		    which should be used to parse the partition table.
-+		    They will be tried in the specified ordering and
-+		    the next one will be used if the previous one
-+		    failed.
-+
-+		    Example: linux,part-probe = "cmdlinepart", "ofpart";
-+
-+		    This is also the default value, which will be used
-+		    if this attribute is not specified. It could be
-+		    that the flash driver in use overwrote the default
-+		    value and uses some other default.
-+
-+		    Possible values are: bcm47xxpart, afs, ar7part,
-+		    ofoldpart, ofpart, bcm63xxpart, RedBoot, cmdlinepart
-+
- The ECC strength and ECC step size properties define the correction capability
- of a controller. Together, they say a controller can correct "{strength} bit
- errors per {size} bytes".
---- a/drivers/mtd/maps/physmap_of.c
-+++ b/drivers/mtd/maps/physmap_of.c
-@@ -113,47 +113,9 @@ static struct mtd_info *obsolete_probe(s
- static const char * const part_probe_types_def[] = {
- 	"cmdlinepart", "RedBoot", "ofpart", "ofoldpart", NULL };
- 
--static const char * const *of_get_probes(struct device_node *dp)
--{
--	const char *cp;
--	int cplen;
--	unsigned int l;
--	unsigned int count;
--	const char **res;
--
--	cp = of_get_property(dp, "linux,part-probe", &cplen);
--	if (cp == NULL)
--		return part_probe_types_def;
--
--	count = 0;
--	for (l = 0; l != cplen; l++)
--		if (cp[l] == 0)
--			count++;
--
--	res = kzalloc((count + 1)*sizeof(*res), GFP_KERNEL);
--	if (!res)
--		return NULL;
--	count = 0;
--	while (cplen > 0) {
--		res[count] = cp;
--		l = strlen(cp) + 1;
--		cp += l;
--		cplen -= l;
--		count++;
--	}
--	return res;
--}
--
--static void of_free_probes(const char * const *probes)
--{
--	if (probes != part_probe_types_def)
--		kfree(probes);
--}
--
- static const struct of_device_id of_flash_match[];
- static int of_flash_probe(struct platform_device *dev)
- {
--	const char * const *part_probe_types;
- 	const struct of_device_id *match;
- 	struct device_node *dp = dev->dev.of_node;
- 	struct resource res;
-@@ -317,14 +279,8 @@ static int of_flash_probe(struct platfor
- 
- 	info->cmtd->dev.parent = &dev->dev;
- 	mtd_set_of_node(info->cmtd, dp);
--	part_probe_types = of_get_probes(dp);
--	if (!part_probe_types) {
--		err = -ENOMEM;
--		goto err_out;
--	}
--	mtd_device_parse_register(info->cmtd, part_probe_types, NULL,
-+	mtd_device_parse_register(info->cmtd, part_probe_types_def, NULL,
- 			NULL, 0);
--	of_free_probes(part_probe_types);
- 
- 	kfree(mtd_list);
- 
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -29,6 +29,7 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- #include <linux/err.h>
- #include <linux/of.h>
- 
-@@ -827,6 +828,42 @@ void deregister_mtd_parser(struct mtd_pa
- EXPORT_SYMBOL_GPL(deregister_mtd_parser);
- 
- /*
-+ * Parses the linux,part-probe device tree property.
-+ * When a non null value is returned it has to be freed with kfree() by
-+ * the caller.
-+ */
-+static const char * const *of_get_probes(struct device_node *dp)
-+{
-+	const char *cp;
-+	int cplen;
-+	unsigned int l;
-+	unsigned int count;
-+	const char **res;
-+
-+	cp = of_get_property(dp, "linux,part-probe", &cplen);
-+	if (cp == NULL)
-+		return NULL;
-+
-+	count = 0;
-+	for (l = 0; l != cplen; l++)
-+		if (cp[l] == 0)
-+			count++;
-+
-+	res = kzalloc((count + 1) * sizeof(*res), GFP_KERNEL);
-+	if (!res)
-+		return NULL;
-+	count = 0;
-+	while (cplen > 0) {
-+		res[count] = cp;
-+		l = strlen(cp) + 1;
-+		cp += l;
-+		cplen -= l;
-+		count++;
-+	}
-+	return res;
-+}
-+
-+/*
-  * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
-  * are changing this array!
-  */
-@@ -975,6 +1012,13 @@ int parse_mtd_partitions(struct mtd_info
- 	struct mtd_partitions pparts = { };
- 	struct mtd_part_parser *parser;
- 	int ret, err = 0;
-+	const char *const *types_of = NULL;
-+
-+	if (mtd_get_of_node(master)) {
-+		types_of = of_get_probes(mtd_get_of_node(master));
-+		if (types_of != NULL)
-+			types = types_of;
-+	}
- 
- 	if (!types)
- 		types = mtd_is_partition(master) ? default_subpartition_types :
-@@ -1016,6 +1060,7 @@ int parse_mtd_partitions(struct mtd_info
- 		if (ret < 0 && !err)
- 			err = ret;
- 	}
-+	kfree(types_of);
- 	return err;
- }
- 
diff --git a/target/linux/generic/pending-4.9/170-MIPS-PCI-add-controllers-before-the-specified-head.patch b/target/linux/generic/pending-4.9/170-MIPS-PCI-add-controllers-before-the-specified-head.patch
deleted file mode 100644
index 33f28912a2..0000000000
--- a/target/linux/generic/pending-4.9/170-MIPS-PCI-add-controllers-before-the-specified-head.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Mathias Kresin <dev@kresin.me>
-Subject: MIPS: PCI: add controllers before the specified head
-
-With commit 23dac14d058f ("MIPS: PCI: Use struct list_head lists") new
-controllers are added after the specified head where they were added
-before the specified head previously.
-
-Use list_add_tail to restore the former order.
-
-This patches fixes the following PCI error on lantiq:
-
-  pci 0000:01:00.0: BAR 0: error updating (0x1c000004 != 0x000000)
-
-Fixes: 23dac14d058f ("MIPS: PCI: Use struct list_head lists")
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- arch/mips/pci/pci-legacy.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/pci/pci-legacy.c
-+++ b/arch/mips/pci/pci-legacy.c
-@@ -194,7 +194,7 @@ void register_pci_controller(struct pci_
- 	}
- 
- 	INIT_LIST_HEAD(&hose->list);
--	list_add(&hose->list, &controllers);
-+	list_add_tail(&hose->list, &controllers);
- 
- 	/*
- 	 * Do not panic here but later - this might happen before console init.
diff --git a/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch
deleted file mode 100644
index f2d5df503f..0000000000
--- a/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: phy: at803x: add support for AT8032
-
-Like AT8030, this PHY needs the GPIO reset workaround
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -62,6 +62,7 @@
- 
- #define ATH8030_PHY_ID 0x004dd076
- #define ATH8031_PHY_ID 0x004dd074
-+#define ATH8032_PHY_ID 0x004dd023
- #define ATH8035_PHY_ID 0x004dd072
- 
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
-@@ -259,7 +260,8 @@ static int at803x_probe(struct phy_devic
- 	if (!priv)
- 		return -ENOMEM;
- 
--	if (phydev->drv->phy_id != ATH8030_PHY_ID)
-+	if (phydev->drv->phy_id != ATH8030_PHY_ID &&
-+	    phydev->drv->phy_id != ATH8032_PHY_ID)
- 		goto does_not_require_reset_workaround;
- 
- 	gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-@@ -335,7 +337,7 @@ static void at803x_link_change_notify(st
- 	struct at803x_priv *priv = phydev->priv;
- 
- 	/*
--	 * Conduct a hardware reset for AT8030 every time a link loss is
-+	 * Conduct a hardware reset for AT8030/2 every time a link loss is
- 	 * signalled. This is necessary to circumvent a hardware bug that
- 	 * occurs when the cable is unplugged while TX packets are pending
- 	 * in the FIFO. In such cases, the FIFO enters an error mode it
-@@ -447,6 +449,24 @@ static struct phy_driver at803x_driver[]
- 	.aneg_done		= at803x_aneg_done,
- 	.ack_interrupt		= &at803x_ack_interrupt,
- 	.config_intr		= &at803x_config_intr,
-+}, {
-+	/* ATHEROS 8032 */
-+	.phy_id			= ATH8032_PHY_ID,
-+	.name			= "Atheros 8032 ethernet",
-+	.phy_id_mask		= 0xffffffef,
-+	.probe			= at803x_probe,
-+	.config_init		= at803x_config_init,
-+	.link_change_notify	= at803x_link_change_notify,
-+	.set_wol		= at803x_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	.features		= PHY_BASIC_FEATURES,
-+	.flags			= PHY_HAS_INTERRUPT,
-+	.config_aneg		= genphy_config_aneg,
-+	.read_status		= genphy_read_status,
-+	.ack_interrupt		= at803x_ack_interrupt,
-+	.config_intr		= at803x_config_intr,
- } };
- 
- module_phy_driver(at803x_driver);
-@@ -454,6 +474,7 @@ module_phy_driver(at803x_driver);
- static struct mdio_device_id __maybe_unused atheros_tbl[] = {
- 	{ ATH8030_PHY_ID, 0xffffffef },
- 	{ ATH8031_PHY_ID, 0xffffffef },
-+	{ ATH8032_PHY_ID, 0xffffffef },
- 	{ ATH8035_PHY_ID, 0xffffffef },
- 	{ }
- };
diff --git a/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch b/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
deleted file mode 100644
index 8899664fba..0000000000
--- a/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From patchwork Fri Jul 21 18:36:24 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [2/5] e1000e: Fix wrong comment related to link detection
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 9857489
-Message-Id: <20170721183627.13373-2-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
- intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Date: Fri, 21 Jul 2017 11:36:24 -0700
-
-Reading e1000e_check_for_copper_link() shows that get_link_status is set to
-false after link has been detected. Therefore, it stays TRUE until then.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
-Tested-by: Aaron Brown <aaron.f.brown@intel.com>
----
- drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -5067,7 +5067,7 @@ static bool e1000e_has_link(struct e1000
- 
- 	/* get_link_status is set on LSC (link status) interrupt or
- 	 * Rx sequence error interrupt.  get_link_status will stay
--	 * false until the check_for_link establishes link
-+	 * true until the check_for_link establishes link
- 	 * for copper adapters ONLY
- 	 */
- 	switch (hw->phy.media_type) {
-@@ -5085,7 +5085,7 @@ static bool e1000e_has_link(struct e1000
- 		break;
- 	case e1000_media_type_internal_serdes:
- 		ret_val = hw->mac.ops.check_for_link(hw);
--		link_active = adapter->hw.mac.serdes_has_link;
-+		link_active = hw->mac.serdes_has_link;
- 		break;
- 	default:
- 	case e1000_media_type_unknown:
diff --git a/target/linux/generic/pending-4.9/201-extra_optimization.patch b/target/linux/generic/pending-4.9/201-extra_optimization.patch
deleted file mode 100644
index 3d0fc822bb..0000000000
--- a/target/linux/generic/pending-4.9/201-extra_optimization.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Upgrade to Linux 2.6.19
-
-- Includes large parts of the patch from #1021 by dpalffy
-- Includes RB532 NAND driver changes by n0-1
-
-[john@phrozen.org: feix will add this to his upstream queue]
-
-lede-commit: bff468813f78f81e36ebb2a3f4354de7365e640f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -655,12 +655,12 @@ KBUILD_CFLAGS	+= $(call cc-option,-fdata
- endif
- 
- ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
--KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
-+KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
- else
- ifdef CONFIG_PROFILE_ALL_BRANCHES
--KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,)
-+KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
- else
--KBUILD_CFLAGS   += -O2
-+KBUILD_CFLAGS   += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION)
- endif
- endif
- 
diff --git a/target/linux/generic/pending-4.9/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-4.9/203-kallsyms_uncompressed.patch
deleted file mode 100644
index f275194739..0000000000
--- a/target/linux/generic/pending-4.9/203-kallsyms_uncompressed.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
-
-[john@phrozen.org: added to my upstream queue 30.12.2016]
-lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- init/Kconfig            | 11 +++++++++++
- kernel/kallsyms.c       |  8 ++++++++
- scripts/kallsyms.c      | 12 ++++++++++++
- scripts/link-vmlinux.sh |  4 ++++
- 4 files changed, 35 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1370,6 +1370,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
- 	  the unaligned access emulation.
- 	  see arch/parisc/kernel/unaligned.c for reference
- 
-+config KALLSYMS_UNCOMPRESSED
-+	bool "Keep kallsyms uncompressed"
-+	depends on KALLSYMS
-+	help
-+		Normally kallsyms contains compressed symbols (using a token table),
-+		reducing the uncompressed kernel image size. Keeping the symbol table
-+		uncompressed significantly improves the size of this part in compressed
-+		kernel images.
-+
-+		Say N unless you need compressed kernel images to be small.
-+
- config HAVE_PCSPKR_PLATFORM
- 	bool
- 
---- a/kernel/kallsyms.c
-+++ b/kernel/kallsyms.c
-@@ -113,6 +113,11 @@ static unsigned int kallsyms_expand_symb
- 	 * For every byte on the compressed symbol data, copy the table
- 	 * entry for that byte.
- 	 */
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	memcpy(result, data + 1, len - 1);
-+	result += len - 1;
-+	len = 0;
-+#endif
- 	while (len) {
- 		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
- 		data++;
-@@ -145,6 +150,9 @@ tail:
-  */
- static char kallsyms_get_symbol_type(unsigned int off)
- {
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	return kallsyms_names[off + 1];
-+#endif
- 	/*
- 	 * Get just the first code, look it up in the token table,
- 	 * and return the first char from this token.
---- a/scripts/kallsyms.c
-+++ b/scripts/kallsyms.c
-@@ -61,6 +61,7 @@ static struct addr_range percpu_range =
- static struct sym_entry *table;
- static unsigned int table_size, table_cnt;
- static int all_symbols = 0;
-+static int uncompressed = 0;
- static int absolute_percpu = 0;
- static char symbol_prefix_char = '\0';
- static int base_relative = 0;
-@@ -446,6 +447,9 @@ static void write_src(void)
- 
- 	free(markers);
- 
-+	if (uncompressed)
-+		return;
-+
- 	output_label("kallsyms_token_table");
- 	off = 0;
- 	for (i = 0; i < 256; i++) {
-@@ -504,6 +508,9 @@ static void *find_token(unsigned char *s
- {
- 	int i;
- 
-+	if (uncompressed)
-+		return NULL;
-+
- 	for (i = 0; i < len - 1; i++) {
- 		if (str[i] == token[0] && str[i+1] == token[1])
- 			return &str[i];
-@@ -576,6 +583,9 @@ static void optimize_result(void)
- {
- 	int i, best;
- 
-+	if (uncompressed)
-+		return;
-+
- 	/* using the '\0' symbol last allows compress_symbols to use standard
- 	 * fast string functions */
- 	for (i = 255; i >= 0; i--) {
-@@ -764,6 +774,8 @@ int main(int argc, char **argv)
- 				symbol_prefix_char = *p;
- 			} else if (strcmp(argv[i], "--base-relative") == 0)
- 				base_relative = 1;
-+			else if (strcmp(argv[i], "--uncompressed") == 0)
-+				uncompressed = 1;
- 			else
- 				usage();
- 		}
---- a/scripts/link-vmlinux.sh
-+++ b/scripts/link-vmlinux.sh
-@@ -136,6 +136,10 @@ kallsyms()
- 		kallsymopt="${kallsymopt} --base-relative"
- 	fi
- 
-+	if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
-+		kallsymopt="${kallsymopt} --uncompressed"
-+	fi
-+
- 	local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL}               \
- 		      ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
- 
diff --git a/target/linux/generic/pending-4.9/205-backtrace_module_info.patch b/target/linux/generic/pending-4.9/205-backtrace_module_info.patch
deleted file mode 100644
index 03c14e048f..0000000000
--- a/target/linux/generic/pending-4.9/205-backtrace_module_info.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
-
-[john@phrozen.org: felix will add this to his upstream queue]
-
-lede-commit 53827cdc824556cda910b23ce5030c363b8f1461
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- lib/vsprintf.c | 15 +++++++++++----
- 1 file changed, 11 insertions(+), 4 deletions(-)
-
---- a/lib/vsprintf.c
-+++ b/lib/vsprintf.c
-@@ -669,8 +669,10 @@ char *symbol_string(char *buf, char *end
- 		    struct printf_spec spec, const char *fmt)
- {
- 	unsigned long value;
--#ifdef CONFIG_KALLSYMS
- 	char sym[KSYM_SYMBOL_LEN];
-+#ifndef CONFIG_KALLSYMS
-+	struct module *mod;
-+	int len;
- #endif
- 
- 	if (fmt[1] == 'R')
-@@ -684,11 +686,16 @@ char *symbol_string(char *buf, char *end
- 		sprint_symbol(sym, value);
- 	else
- 		sprint_symbol_no_offset(sym, value);
--
--	return string(buf, end, sym, spec);
- #else
--	return special_hex_number(buf, end, value, sizeof(void *));
-+	len = snprintf(sym, sizeof(sym), "0x%lx", value);
-+
-+	mod = __module_address(value);
-+	if (mod)
-+		snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
-+			 mod->name, mod->core_layout.base,
-+			 mod->core_layout.size);
- #endif
-+	return string(buf, end, sym, spec);
- }
- 
- static noinline_for_stack
diff --git a/target/linux/generic/pending-4.9/220-optimize_inlining.patch b/target/linux/generic/pending-4.9/220-optimize_inlining.patch
deleted file mode 100644
index 75c04ea15c..0000000000
--- a/target/linux/generic/pending-4.9/220-optimize_inlining.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/x86/Kconfig.debug
-+++ b/arch/x86/Kconfig.debug
-@@ -287,20 +287,6 @@ config CPA_DEBUG
- 	---help---
- 	  Do change_page_attr() self-tests every 30 seconds.
- 
--config OPTIMIZE_INLINING
--	bool "Allow gcc to uninline functions marked 'inline'"
--	---help---
--	  This option determines if the kernel forces gcc to inline the functions
--	  developers have marked 'inline'. Doing so takes away freedom from gcc to
--	  do what it thinks is best, which is desirable for the gcc 3.x series of
--	  compilers. The gcc 4.x series have a rewritten inlining algorithm and
--	  enabling this option will generate a smaller kernel there. Hopefully
--	  this algorithm is so good that allowing gcc 4.x and above to make the
--	  decision will become the default in the future. Until then this option
--	  is there to test gcc for this.
--
--	  If unsure, say N.
--
- config DEBUG_ENTRY
- 	bool "Debug low-level entry code"
- 	depends on DEBUG_KERNEL
---- a/lib/Kconfig.debug
-+++ b/lib/Kconfig.debug
-@@ -117,6 +117,20 @@ endmenu # "printk and dmesg options"
- 
- menu "Compile-time checks and compiler options"
- 
-+config OPTIMIZE_INLINING
-+	bool "Allow gcc to uninline functions marked 'inline'"
-+	---help---
-+	  This option determines if the kernel forces gcc to inline the functions
-+	  developers have marked 'inline'. Doing so takes away freedom from gcc to
-+	  do what it thinks is best, which is desirable for the gcc 3.x series of
-+	  compilers. The gcc 4.x series have a rewritten inlining algorithm and
-+	  enabling this option will generate a smaller kernel there. Hopefully
-+	  this algorithm is so good that allowing gcc 4.x and above to make the
-+	  decision will become the default in the future. Until then this option
-+	  is there to test gcc for this.
-+
-+	  If unsure, say N.
-+
- config DEBUG_INFO
- 	bool "Compile the kernel with debug info"
- 	depends on DEBUG_KERNEL && !COMPILE_TEST
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -273,9 +273,6 @@ config ZONE_DMA32
- config AUDIT_ARCH
- 	def_bool y if X86_64
- 
--config ARCH_SUPPORTS_OPTIMIZED_INLINING
--	def_bool y
--
- config ARCH_SUPPORTS_DEBUG_PAGEALLOC
- 	def_bool y
- 
---- a/include/linux/compiler-gcc.h
-+++ b/include/linux/compiler-gcc.h
-@@ -89,8 +89,7 @@
-  * of extern inline functions at link time.
-  * A lot of inline functions can cause havoc with function tracing.
-  */
--#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) ||		\
--    !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-+#if !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
- #define inline \
- 	inline __attribute__((always_inline, unused)) notrace __gnu_inline
- #else
diff --git a/target/linux/generic/pending-4.9/240-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-4.9/240-remove-unsane-filenames-from-deps_initramfs-list.patch
deleted file mode 100644
index 5dc38edfb2..0000000000
--- a/target/linux/generic/pending-4.9/240-remove-unsane-filenames-from-deps_initramfs-list.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: usr: sanitize deps_initramfs list
-
-If any filename in the intramfs dependency
-list contains a colon, that causes a kernel
-build error like this:
-
-/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
-make[5]: *** [usr] Error 2
-
-Fix it by removing such filenames from the
-deps_initramfs list.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- usr/Makefile | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/usr/Makefile
-+++ b/usr/Makefile
-@@ -53,6 +53,8 @@ ifneq ($(wildcard $(obj)/.initramfs_data
- 	include $(obj)/.initramfs_data.cpio.d
- endif
- 
-+deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
-+
- quiet_cmd_initfs = GEN     $@
-       cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
- 
-@@ -61,14 +63,14 @@ targets := initramfs_data.cpio.gz initra
- 	initramfs_data.cpio.lzo initramfs_data.cpio.lz4 \
- 	initramfs_data.cpio
- # do not try to update files included in initramfs
--$(deps_initramfs): ;
-+$(deps_initramfs_sane): ;
- 
--$(deps_initramfs): klibcdirs
-+$(deps_initramfs_sane): klibcdirs
- # We rebuild initramfs_data.cpio if:
- # 1) Any included file is newer then initramfs_data.cpio
- # 2) There are changes in which files are included (added or deleted)
- # 3) If gen_init_cpio are newer than initramfs_data.cpio
- # 4) arguments to gen_initramfs.sh changes
--$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
-+$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs
- 	$(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d
- 	$(call if_changed,initfs)
diff --git a/target/linux/generic/pending-4.9/261-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-4.9/261-enable_wilink_platform_without_drivers.patch
deleted file mode 100644
index 9955ab3c0b..0000000000
--- a/target/linux/generic/pending-4.9/261-enable_wilink_platform_without_drivers.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with
- compat-wireless, too
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- drivers/net/wireless/ti/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ti/Kconfig
-+++ b/drivers/net/wireless/ti/Kconfig
-@@ -19,7 +19,7 @@ source "drivers/net/wireless/ti/wlcore/K
- 
- config WILINK_PLATFORM_DATA
- 	bool "TI WiLink platform data"
--	depends on WLCORE_SDIO || WL1251_SDIO
-+	depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
- 	default y
- 	---help---
- 	Small platform data bit needed to pass data to the sdio modules.
diff --git a/target/linux/generic/pending-4.9/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-4.9/300-mips_expose_boot_raw.patch
deleted file mode 100644
index 68a0833580..0000000000
--- a/target/linux/generic/pending-4.9/300-mips_expose_boot_raw.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Mark Miller <mark@mirell.org>
-Subject: mips: expose CONFIG_BOOT_RAW
-
-This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
-certain Broadcom chipsets running CFE in order to load the kernel.
-
-Signed-off-by: Mark Miller <mark@mirell.org>
-Acked-by: Rob Landley <rob@landley.net>
----
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1068,9 +1068,6 @@ config FW_ARC
- config ARCH_MAY_HAVE_PC_FDC
- 	bool
- 
--config BOOT_RAW
--	bool
--
- config CEVT_BCM1480
- 	bool
- 
-@@ -2967,6 +2964,18 @@ choice
- 		bool "Extend builtin kernel arguments with bootloader arguments"
- endchoice
- 
-+config BOOT_RAW
-+	bool "Enable the kernel to be executed from the load address"
-+	default n
-+	help
-+	 Allow the kernel to be executed from the load address for
-+	 bootloaders which cannot read the ELF format. This places
-+	 a jump to start_kernel at the load address.
-+
-+	 If unsure, say N.
-+
-+
-+
- endmenu
- 
- config LOCKDEP_SUPPORT
diff --git a/target/linux/generic/pending-4.9/302-mips_no_branch_likely.patch b/target/linux/generic/pending-4.9/302-mips_no_branch_likely.patch
deleted file mode 100644
index 0e4600237d..0000000000
--- a/target/linux/generic/pending-4.9/302-mips_no_branch_likely.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: use -mno-branch-likely for kernel and userspace
-
-saves ~11k kernel size after lzma and ~12k squashfs size in the
-
-lede-commit: 41a039f46450ffae9483d6216422098669da2900
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -90,7 +90,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- # machines may also.  Since BFD is incredibly buggy with respect to
- # crossformat linking we rely on the elf2ecoff tool for format conversion.
- #
--cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
-+cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
diff --git a/target/linux/generic/pending-4.9/304-mips_disable_fpu.patch b/target/linux/generic/pending-4.9/304-mips_disable_fpu.patch
deleted file mode 100644
index 889c79ad9b..0000000000
--- a/target/linux/generic/pending-4.9/304-mips_disable_fpu.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From:   Manuel Lauss <manuel.lauss@gmail.com>
-Subject: [RFC PATCH v4 2/2] MIPS: make FPU emulator optional
-
-This small patch makes the MIPS FPU emulator optional. The kernel
-kills float-users on systems without a hardware FPU by sending a SIGILL.
-
-Disabling the emulator shrinks vmlinux by about 54kBytes (32bit,
-optimizing for size).
-
-Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
----
-v4: rediffed because of patch 1/2, should now work with micromips as well
-v3: updated patch description with size savings.
-v2: incorporated changes suggested by Jonas Gorski
-    force the fpu emulator on for micromips: relocating the parts
-    of the mmips code in the emulator to other areas would be a
-    much larger change; I went the cheap route instead with this.
-
- arch/mips/Kbuild                     |  2 +-
- arch/mips/Kconfig                    | 14 ++++++++++++++
- arch/mips/include/asm/fpu.h          |  5 +++--
- arch/mips/include/asm/fpu_emulator.h | 15 +++++++++++++++
- 4 files changed, 33 insertions(+), 3 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2891,6 +2891,20 @@ config MIPS_O32_FP64_SUPPORT
- 
- 	  If unsure, say N.
- 
-+config MIPS_FPU_EMULATOR
-+	bool "MIPS FPU Emulator"
-+	default y
-+	help
-+	  This option lets you disable the built-in MIPS FPU (Coprocessor 1)
-+	  emulator, which handles floating-point instructions on processors
-+	  without a hardware FPU.  It is generally a good idea to keep the
-+	  emulator built-in, unless you are perfectly sure you have a
-+	  complete soft-float environment.  With the emulator disabled, all
-+	  users of float operations will be killed with an illegal instr-
-+	  uction exception.
-+
-+	  Say Y, please.
-+
- config USE_OF
- 	bool
- 	select OF
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -287,7 +287,7 @@ OBJCOPYFLAGS		+= --remove-section=.regin
- head-y := arch/mips/kernel/head.o
- 
- libs-y			+= arch/mips/lib/
--libs-y			+= arch/mips/math-emu/
-+libs-$(CONFIG_MIPS_FPU_EMULATOR)	+= arch/mips/math-emu/
- 
- # See arch/mips/Kbuild for content of core part of the kernel
- core-y += arch/mips/
---- a/arch/mips/include/asm/fpu.h
-+++ b/arch/mips/include/asm/fpu.h
-@@ -227,8 +227,10 @@ static inline int init_fpu(void)
- 		/* Restore FRE */
- 		write_c0_config5(config5);
- 		enable_fpu_hazard();
--	} else
-+	} else if (IS_ENABLED(CONFIG_MIPS_FPU_EMULATOR))
- 		fpu_emulator_init_fpu();
-+	else
-+		ret = SIGILL;
- 
- 	return ret;
- }
---- a/arch/mips/include/asm/fpu_emulator.h
-+++ b/arch/mips/include/asm/fpu_emulator.h
-@@ -30,6 +30,7 @@
- #include <asm/local.h>
- #include <asm/processor.h>
- 
-+#ifdef CONFIG_MIPS_FPU_EMULATOR
- #ifdef CONFIG_DEBUG_FS
- 
- struct mips_fpu_emulator_stats {
-@@ -63,6 +64,16 @@ do {									\
- extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
- 				    struct mips_fpu_struct *ctx, int has_fpu,
- 				    void *__user *fault_addr);
-+#else	/* no CONFIG_MIPS_FPU_EMULATOR */
-+static inline int fpu_emulator_cop1Handler(struct pt_regs *xcp,
-+				struct mips_fpu_struct *ctx, int has_fpu,
-+				void *__user *fault_addr)
-+{
-+	*fault_addr = NULL;
-+	return SIGILL;	/* we don't speak MIPS FPU */
-+}
-+#endif	/* CONFIG_MIPS_FPU_EMULATOR */
-+
- void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
- 		     struct task_struct *tsk);
- int process_fpemu_return(int sig, void __user *fault_addr,
---- a/arch/mips/include/asm/dsemul.h
-+++ b/arch/mips/include/asm/dsemul.h
-@@ -41,6 +41,7 @@ struct task_struct;
- extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
- 		       unsigned long branch_pc, unsigned long cont_pc);
- 
-+#ifdef CONFIG_MIPS_FPU_EMULATOR
- /**
-  * do_dsemulret() - Return from a delay slot 'emulation' frame
-  * @xcp:	User thread register context.
-@@ -88,5 +89,27 @@ extern bool dsemul_thread_rollback(struc
-  * before @mm is freed in order to avoid memory leaks.
-  */
- extern void dsemul_mm_cleanup(struct mm_struct *mm);
-+#else
-+static inline bool do_dsemulret(struct pt_regs *xcp)
-+{
-+	return false;
-+}
-+
-+static inline bool dsemul_thread_cleanup(struct task_struct *tsk)
-+{
-+	return false;
-+}
-+
-+static inline bool dsemul_thread_rollback(struct pt_regs *regs)
-+{
-+	return false;
-+}
-+
-+static inline void dsemul_mm_cleanup(struct mm_struct *mm)
-+{
-+
-+}
-+
-+#endif
- 
- #endif /* __MIPS_ASM_DSEMUL_H__ */
diff --git a/target/linux/generic/pending-4.9/305-mips_module_reloc.patch b/target/linux/generic/pending-4.9/305-mips_module_reloc.patch
deleted file mode 100644
index 10d9f0bdd5..0000000000
--- a/target/linux/generic/pending-4.9/305-mips_module_reloc.patch
+++ /dev/null
@@ -1,370 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to
-
-lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile             |   5 +
- arch/mips/include/asm/module.h |   5 +
- arch/mips/kernel/module.c      | 279 ++++++++++++++++++++++++++++++++++++++++-
- 3 files changed, 284 insertions(+), 5 deletions(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -93,8 +93,18 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
-+ifdef CONFIG_64BIT
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
- KBUILD_CFLAGS_MODULE		+= -mlong-calls
-+else
-+  ifdef CONFIG_DYNAMIC_FTRACE
-+    KBUILD_AFLAGS_MODULE	+= -mlong-calls
-+    KBUILD_CFLAGS_MODULE	+= -mlong-calls
-+  else
-+    KBUILD_AFLAGS_MODULE	+= -mno-long-calls
-+    KBUILD_CFLAGS_MODULE	+= -mno-long-calls
-+  endif
-+endif
- 
- ifeq ($(CONFIG_RELOCATABLE),y)
- LDFLAGS_vmlinux			+= --emit-relocs
---- a/arch/mips/include/asm/module.h
-+++ b/arch/mips/include/asm/module.h
-@@ -11,6 +11,11 @@ struct mod_arch_specific {
- 	const struct exception_table_entry *dbe_start;
- 	const struct exception_table_entry *dbe_end;
- 	struct mips_hi16 *r_mips_hi16_list;
-+
-+	void *phys_plt_tbl;
-+	void *virt_plt_tbl;
-+	unsigned int phys_plt_offset;
-+	unsigned int virt_plt_offset;
- };
- 
- typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
---- a/arch/mips/kernel/module.c
-+++ b/arch/mips/kernel/module.c
-@@ -44,14 +44,221 @@ struct mips_hi16 {
- static LIST_HEAD(dbe_list);
- static DEFINE_SPINLOCK(dbe_lock);
- 
--#ifdef MODULE_START
-+/*
-+ * Get the potential max trampolines size required of the init and
-+ * non-init sections. Only used if we cannot find enough contiguous
-+ * physically mapped memory to put the module into.
-+ */
-+static unsigned int
-+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-+             const char *secstrings, unsigned int symindex, bool is_init)
-+{
-+	unsigned long ret = 0;
-+	unsigned int i, j;
-+	Elf_Sym *syms;
-+
-+	/* Everything marked ALLOC (this includes the exported symbols) */
-+	for (i = 1; i < hdr->e_shnum; ++i) {
-+		unsigned int info = sechdrs[i].sh_info;
-+
-+		if (sechdrs[i].sh_type != SHT_REL
-+		    && sechdrs[i].sh_type != SHT_RELA)
-+			continue;
-+
-+		/* Not a valid relocation section? */
-+		if (info >= hdr->e_shnum)
-+			continue;
-+
-+		/* Don't bother with non-allocated sections */
-+		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-+			continue;
-+
-+		/* If it's called *.init*, and we're not init, we're
-+                   not interested */
-+		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-+		    != is_init)
-+			continue;
-+
-+		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
-+		if (sechdrs[i].sh_type == SHT_REL) {
-+			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rel[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		} else {
-+			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rela[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+#ifndef MODULE_START
-+static void *alloc_phys(unsigned long size)
-+{
-+	unsigned order;
-+	struct page *page;
-+	struct page *p;
-+
-+	size = PAGE_ALIGN(size);
-+	order = get_order(size);
-+
-+	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
-+			__GFP_THISNODE, order);
-+	if (!page)
-+		return NULL;
-+
-+	split_page(page, order);
-+
-+	/* mark all pages except for the last one */
-+	for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
-+		set_bit(PG_owner_priv_1, &p->flags);
-+
-+	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
-+		__free_page(p);
-+
-+	return page_address(page);
-+}
-+#endif
-+
-+static void free_phys(void *ptr)
-+{
-+	struct page *page;
-+	bool free;
-+
-+	page = virt_to_page(ptr);
-+	do {
-+		free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
-+		__free_page(page);
-+		page++;
-+	} while (free);
-+}
-+
-+
- void *module_alloc(unsigned long size)
- {
-+#ifdef MODULE_START
- 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
- 				GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
- 				__builtin_return_address(0));
-+#else
-+	void *ptr;
-+
-+	if (size == 0)
-+		return NULL;
-+
-+	ptr = alloc_phys(size);
-+
-+	/* If we failed to allocate physically contiguous memory,
-+	 * fall back to regular vmalloc. The module loader code will
-+	 * create jump tables to handle long jumps */
-+	if (!ptr)
-+		return vmalloc(size);
-+
-+	return ptr;
-+#endif
- }
-+
-+static inline bool is_phys_addr(void *ptr)
-+{
-+#ifdef CONFIG_64BIT
-+	return (KSEGX((unsigned long)ptr) == CKSEG0);
-+#else
-+	return (KSEGX(ptr) == KSEG0);
- #endif
-+}
-+
-+/* Free memory returned from module_alloc */
-+void module_memfree(void *module_region)
-+{
-+	if (is_phys_addr(module_region))
-+		free_phys(module_region);
-+	else
-+		vfree(module_region);
-+}
-+
-+static void *__module_alloc(int size, bool phys)
-+{
-+	void *ptr;
-+
-+	if (phys)
-+		ptr = kmalloc(size, GFP_KERNEL);
-+	else
-+		ptr = vmalloc(size);
-+	return ptr;
-+}
-+
-+static void __module_free(void *ptr)
-+{
-+	if (is_phys_addr(ptr))
-+		kfree(ptr);
-+	else
-+		vfree(ptr);
-+}
-+
-+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
-+			      char *secstrings, struct module *mod)
-+{
-+	unsigned int symindex = 0;
-+	unsigned int core_size, init_size;
-+	int i;
-+
-+	mod->arch.phys_plt_offset = 0;
-+	mod->arch.virt_plt_offset = 0;
-+	mod->arch.phys_plt_tbl = NULL;
-+	mod->arch.virt_plt_tbl = NULL;
-+
-+	if (IS_ENABLED(CONFIG_64BIT))
-+		return 0;
-+
-+	for (i = 1; i < hdr->e_shnum; i++)
-+		if (sechdrs[i].sh_type == SHT_SYMTAB)
-+			symindex = i;
-+
-+	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
-+	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
-+
-+	if ((core_size + init_size) == 0)
-+		return 0;
-+
-+	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
-+	if (!mod->arch.phys_plt_tbl)
-+		return -ENOMEM;
-+
-+	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
-+	if (!mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
- 
- int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
- {
-@@ -65,8 +272,39 @@ static int apply_r_mips_32_rel(struct mo
- 	return 0;
- }
- 
-+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
-+				 void *start, Elf_Addr v)
-+{
-+	unsigned *tramp = start + *plt_offset;
-+	*plt_offset += 4 * sizeof(int);
-+
-+	/* adjust carry for addiu */
-+	if (v & 0x00008000)
-+		v += 0x10000;
-+
-+	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
-+	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
-+	tramp[2] = 0x03200008;                  /* jr t9 */
-+	tramp[3] = 0x00000000;                  /* nop */
-+
-+	return (Elf_Addr) tramp;
-+}
-+
-+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
-+{
-+	if (is_phys_addr(location))
-+		return add_plt_entry_to(&me->arch.phys_plt_offset,
-+				me->arch.phys_plt_tbl, v);
-+	else
-+		return add_plt_entry_to(&me->arch.virt_plt_offset,
-+				me->arch.virt_plt_tbl, v);
-+
-+}
-+
- static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
- {
-+	u32 ofs = *location & 0x03ffffff;
-+
- 	if (v % 4) {
- 		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
- 		       me->name);
-@@ -74,13 +312,17 @@ static int apply_r_mips_26_rel(struct mo
- 	}
- 
- 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
--		pr_err("module %s: relocation overflow\n",
--		       me->name);
--		return -ENOEXEC;
-+		v = add_plt_entry(me, location, v + (ofs << 2));
-+		if (!v) {
-+			pr_err("module %s: relocation overflow\n",
-+			       me->name);
-+			return -ENOEXEC;
-+		}
-+		ofs = 0;
- 	}
- 
- 	*location = (*location & ~0x03ffffff) |
--		    ((*location + (v >> 2)) & 0x03ffffff);
-+		    ((ofs + (v >> 2)) & 0x03ffffff);
- 
- 	return 0;
- }
-@@ -349,9 +591,36 @@ int module_finalize(const Elf_Ehdr *hdr,
- 		list_add(&me->arch.dbe_list, &dbe_list);
- 		spin_unlock_irq(&dbe_lock);
- 	}
-+
-+	/* Get rid of the fixup trampoline if we're running the module
-+	 * from physically mapped address space */
-+	if (me->arch.phys_plt_offset == 0) {
-+		__module_free(me->arch.phys_plt_tbl);
-+		me->arch.phys_plt_tbl = NULL;
-+	}
-+	if (me->arch.virt_plt_offset == 0) {
-+		__module_free(me->arch.virt_plt_tbl);
-+		me->arch.virt_plt_tbl = NULL;
-+	}
-+
- 	return 0;
- }
- 
-+void module_arch_freeing_init(struct module *mod)
-+{
-+	if (mod->state == MODULE_STATE_LIVE)
-+		return;
-+
-+	if (mod->arch.phys_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+	}
-+	if (mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.virt_plt_tbl);
-+		mod->arch.virt_plt_tbl = NULL;
-+	}
-+}
-+
- void module_arch_cleanup(struct module *mod)
- {
- 	spin_lock_irq(&dbe_lock);
diff --git a/target/linux/generic/pending-4.9/306-mips_mem_functions_performance.patch b/target/linux/generic/pending-4.9/306-mips_mem_functions_performance.patch
deleted file mode 100644
index 2e404b2236..0000000000
--- a/target/linux/generic/pending-4.9/306-mips_mem_functions_performance.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] mips: allow the compiler to optimize memset, memcmp, memcpy  for better performance and (in some instances) smaller code
-
-lede-commit: 07e59c7bc7f375f792ec9734be42fe4fa391a8bb
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/boot/compressed/Makefile |  3 ++-
- arch/mips/include/asm/string.h     | 38 ++++++++++++++++++++++++++++++++++++++
- arch/mips/lib/Makefile             |  2 +-
- arch/mips/lib/memcmp.c             | 22 ++++++++++++++++++++++
- 4 files changed, 63 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/lib/memcmp.c
-
---- a/arch/mips/boot/compressed/Makefile
-+++ b/arch/mips/boot/compressed/Makefile
-@@ -23,7 +23,8 @@ KBUILD_CFLAGS := $(shell echo $(KBUILD_C
- KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
- 
- KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
--	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
-+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
-+	-D__ZBOOT__
- 
- KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
- 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
---- a/arch/mips/include/asm/string.h
-+++ b/arch/mips/include/asm/string.h
-@@ -140,4 +140,42 @@ extern void *memcpy(void *__to, __const_
- #define __HAVE_ARCH_MEMMOVE
- extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
- 
-+#ifndef __ZBOOT__
-+#define memset(__s, __c, len)					\
-+({								\
-+	size_t __len = (len);					\
-+	void *__ret;						\
-+	if (__builtin_constant_p(len) && __len >= 64)		\
-+		__ret = memset((__s), (__c), __len);		\
-+	else							\
-+		__ret = __builtin_memset((__s), (__c), __len);	\
-+	__ret;							\
-+})
-+
-+#define memcpy(dst, src, len)					\
-+({								\
-+	size_t __len = (len);					\
-+	void *__ret;						\
-+	if (__builtin_constant_p(len) && __len >= 64)		\
-+		__ret = memcpy((dst), (src), __len);		\
-+	else							\
-+		__ret = __builtin_memcpy((dst), (src), __len);	\
-+	__ret;							\
-+})
-+
-+#define memmove(dst, src, len)					\
-+({								\
-+	size_t __len = (len);					\
-+	void *__ret;						\
-+	if (__builtin_constant_p(len) && __len >= 64)		\
-+		__ret = memmove((dst), (src), __len);		\
-+	else							\
-+		__ret = __builtin_memmove((dst), (src), __len);	\
-+	__ret;							\
-+})
-+
-+#define __HAVE_ARCH_MEMCMP
-+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
-+#endif
-+
- #endif /* _ASM_STRING_H */
---- a/arch/mips/lib/Makefile
-+++ b/arch/mips/lib/Makefile
-@@ -4,7 +4,7 @@
- 
- lib-y	+= bitops.o csum_partial.o delay.o memcpy.o memset.o \
- 	   mips-atomic.o strlen_user.o strncpy_user.o \
--	   strnlen_user.o uncached.o
-+	   strnlen_user.o uncached.o memcmp.o
- 
- obj-y			+= iomap.o
- obj-$(CONFIG_PCI)	+= iomap-pci.o
---- /dev/null
-+++ b/arch/mips/lib/memcmp.c
-@@ -0,0 +1,22 @@
-+/*
-+ *  copied from linux/lib/string.c
-+ *
-+ *  Copyright (C) 1991, 1992  Linus Torvalds
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/string.h>
-+
-+#undef memcmp
-+int memcmp(const void *cs, const void *ct, size_t count)
-+{
-+	const unsigned char *su1, *su2;
-+	int res = 0;
-+
-+	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
-+		if ((res = *su1 - *su2) != 0)
-+			break;
-+	return res;
-+}
-+EXPORT_SYMBOL(memcmp);
-+
diff --git a/target/linux/generic/pending-4.9/307-mips_highmem_offset.patch b/target/linux/generic/pending-4.9/307-mips_highmem_offset.patch
deleted file mode 100644
index 0529b0c5c8..0000000000
--- a/target/linux/generic/pending-4.9/307-mips_highmem_offset.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/include/asm/mach-generic/spaces.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-generic/spaces.h
-+++ b/arch/mips/include/asm/mach-generic/spaces.h
-@@ -46,7 +46,7 @@
-  * Memory above this physical address will be considered highmem.
-  */
- #ifndef HIGHMEM_START
--#define HIGHMEM_START		_AC(0x20000000, UL)
-+#define HIGHMEM_START		_AC(0x10000000, UL)
- #endif
- 
- #endif /* CONFIG_32BIT */
diff --git a/target/linux/generic/pending-4.9/308-mips32r2_tune.patch b/target/linux/generic/pending-4.9/308-mips32r2_tune.patch
deleted file mode 100644
index 9e1efe2713..0000000000
--- a/target/linux/generic/pending-4.9/308-mips32r2_tune.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
-
-This provides a good tradeoff across at least 24Kc-74Kc, while also
-producing smaller code.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -153,7 +153,7 @@ cflags-$(CONFIG_CPU_R4X00)	+= -march=r46
- cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
- 			-Wa,-mips32 -Wa,--trap
--cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-+cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2 -mtune=34kc,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
- 			-Wa,-mips32r2 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
diff --git a/target/linux/generic/pending-4.9/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch b/target/linux/generic/pending-4.9/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
deleted file mode 100644
index b9c072b237..0000000000
--- a/target/linux/generic/pending-4.9/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 87ec87c2ad615c1a177cd08ef5fa29fc739f6e50 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 23 Dec 2018 18:06:53 +0100
-Subject: [PATCH] MIPS: Add CPU option reporting to /proc/cpuinfo
-
-Many MIPS CPUs have optional CPU features which are not activates for
-all CPU cores. Print the CPU options which are implemented in the core
-in /proc/cpuinfo. This makes it possible to see what features are
-supported and which are not supported. This should cover all standard
-MIPS extensions, before it only printed information about the main MIPS
-ASEs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/kernel/proc.c | 116 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 116 insertions(+)
-
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -128,6 +128,114 @@ static int show_cpuinfo(struct seq_file
- 		seq_printf(m, "micromips kernel\t: %s\n",
- 		      (read_c0_config3() & MIPS_CONF3_ISA_OE) ?  "yes" : "no");
- 	}
-+
-+	seq_printf(m, "Options implemented\t:");
-+	if (cpu_has_tlb)
-+		seq_printf(m, "%s", " tlb");
-+	if (cpu_has_ftlb)
-+		seq_printf(m, "%s", " ftlb");
-+	if (cpu_has_tlbinv)
-+		seq_printf(m, "%s", " tlbinv");
-+	if (cpu_has_segments)
-+		seq_printf(m, "%s", " segments");
-+	if (cpu_has_rixiex)
-+		seq_printf(m, "%s", " rixiex");
-+	if (cpu_has_ldpte)
-+		seq_printf(m, "%s", " ldpte");
-+	if (cpu_has_maar)
-+		seq_printf(m, "%s", " maar");
-+	if (cpu_has_rw_llb)
-+		seq_printf(m, "%s", " rw_llb");
-+	if (cpu_has_4kex)
-+		seq_printf(m, "%s", " 4kex");
-+	if (cpu_has_3k_cache)
-+		seq_printf(m, "%s", " 3k_cache");
-+	if (cpu_has_4k_cache)
-+		seq_printf(m, "%s", " 4k_cache");
-+	if (cpu_has_6k_cache)
-+		seq_printf(m, "%s", " 6k_cache");
-+	if (cpu_has_8k_cache)
-+		seq_printf(m, "%s", " 8k_cache");
-+	if (cpu_has_tx39_cache)
-+		seq_printf(m, "%s", " tx39_cache");
-+	if (cpu_has_octeon_cache)
-+		seq_printf(m, "%s", " octeon_cache");
-+	if (cpu_has_fpu)
-+		seq_printf(m, "%s", " fpu");
-+	if (cpu_has_32fpr)
-+		seq_printf(m, "%s", " 32fpr");
-+	if (cpu_has_cache_cdex_p)
-+		seq_printf(m, "%s", " cache_cdex_p");
-+	if (cpu_has_cache_cdex_s)
-+		seq_printf(m, "%s", " cache_cdex_s");
-+	if (cpu_has_prefetch)
-+		seq_printf(m, "%s", " prefetch");
-+	if (cpu_has_mcheck)
-+		seq_printf(m, "%s", " mcheck");
-+	if (cpu_has_ejtag)
-+		seq_printf(m, "%s", " ejtag");
-+	if (cpu_has_llsc)
-+		seq_printf(m, "%s", " llsc");
-+	if (cpu_has_bp_ghist)
-+		seq_printf(m, "%s", " bp_ghist");
-+	if (cpu_has_guestctl0ext)
-+		seq_printf(m, "%s", " guestctl0ext");
-+	if (cpu_has_guestctl1)
-+		seq_printf(m, "%s", " guestctl1");
-+	if (cpu_has_guestctl2)
-+		seq_printf(m, "%s", " guestctl2");
-+	if (cpu_has_guestid)
-+		seq_printf(m, "%s", " guestid");
-+	if (cpu_has_drg)
-+		seq_printf(m, "%s", " drg");
-+	if (cpu_has_rixi)
-+		seq_printf(m, "%s", " rixi");
-+	if (cpu_has_lpa)
-+		seq_printf(m, "%s", " lpa");
-+	if (cpu_has_mvh)
-+		seq_printf(m, "%s", " mvh");
-+	if (cpu_has_vtag_icache)
-+		seq_printf(m, "%s", " vtag_icache");
-+	if (cpu_has_dc_aliases)
-+		seq_printf(m, "%s", " dc_aliases");
-+	if (cpu_has_ic_fills_f_dc)
-+		seq_printf(m, "%s", " ic_fills_f_dc");
-+	if (cpu_has_pindexed_dcache)
-+		seq_printf(m, "%s", " pindexed_dcache");
-+	if (cpu_has_userlocal)
-+		seq_printf(m, "%s", " userlocal");
-+	if (cpu_has_nofpuex)
-+		seq_printf(m, "%s", " nofpuex");
-+	if (cpu_has_vint)
-+		seq_printf(m, "%s", " vint");
-+	if (cpu_has_veic)
-+		seq_printf(m, "%s", " veic");
-+	if (cpu_has_inclusive_pcaches)
-+		seq_printf(m, "%s", " inclusive_pcaches");
-+	if (cpu_has_perf_cntr_intr_bit)
-+		seq_printf(m, "%s", " perf_cntr_intr_bit");
-+	if (cpu_has_fre)
-+		seq_printf(m, "%s", " fre");
-+	if (cpu_has_cdmm)
-+		seq_printf(m, "%s", " cdmm");
-+	if (cpu_has_small_pages)
-+		seq_printf(m, "%s", " small_pages");
-+	if (cpu_has_nan_legacy)
-+		seq_printf(m, "%s", " nan_legacy");
-+	if (cpu_has_nan_2008)
-+		seq_printf(m, "%s", " nan_2008");
-+	if (cpu_has_ebase_wg)
-+		seq_printf(m, "%s", " ebase_wg");
-+	if (cpu_has_badinstr)
-+		seq_printf(m, "%s", " badinstr");
-+	if (cpu_has_badinstrp)
-+		seq_printf(m, "%s", " badinstrp");
-+	if (cpu_has_contextconfig)
-+		seq_printf(m, "%s", " contextconfig");
-+	if (cpu_has_perf)
-+		seq_printf(m, "%s", " perf");
-+	seq_printf(m, "\n");
-+
- 	seq_printf(m, "shadow register sets\t: %d\n",
- 		      cpu_data[n].srsets);
- 	seq_printf(m, "kscratch registers\t: %d\n",
diff --git a/target/linux/generic/pending-4.9/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-4.9/310-arm_module_unresolved_weak_sym.patch
deleted file mode 100644
index cc1a51d17d..0000000000
--- a/target/linux/generic/pending-4.9/310-arm_module_unresolved_weak_sym.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fix errors in unresolved weak symbols on arm
-
-lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/arm/kernel/module.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/kernel/module.c
-+++ b/arch/arm/kernel/module.c
-@@ -88,6 +88,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
- 			return -ENOEXEC;
- 		}
- 
-+		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
-+		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
-+			continue;
-+
- 		loc = dstsec->sh_addr + rel->r_offset;
- 
- 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/pending-4.9/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-4.9/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
deleted file mode 100644
index c7abd99b3b..0000000000
--- a/target/linux/generic/pending-4.9/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
+++ /dev/null
@@ -1,269 +0,0 @@
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Subject: MIPS: kexec: Accept command line parameters from userspace.
-
-Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- arch/mips/kernel/machine_kexec.c   |  153 +++++++++++++++++++++++++++++++-----
- arch/mips/kernel/machine_kexec.h   |   20 +++++
- arch/mips/kernel/relocate_kernel.S |   21 +++--
- 3 files changed, 167 insertions(+), 27 deletions(-)
- create mode 100644 arch/mips/kernel/machine_kexec.h
-
---- a/arch/mips/kernel/machine_kexec.c
-+++ b/arch/mips/kernel/machine_kexec.c
-@@ -10,14 +10,11 @@
- #include <linux/mm.h>
- #include <linux/delay.h>
- 
-+#include <asm/bootinfo.h>
- #include <asm/cacheflush.h>
- #include <asm/page.h>
--
--extern const unsigned char relocate_new_kernel[];
--extern const size_t relocate_new_kernel_size;
--
--extern unsigned long kexec_start_address;
--extern unsigned long kexec_indirection_page;
-+#include <asm/uaccess.h>
-+#include "machine_kexec.h"
- 
- int (*_machine_kexec_prepare)(struct kimage *) = NULL;
- void (*_machine_kexec_shutdown)(void) = NULL;
-@@ -28,9 +25,115 @@ atomic_t kexec_ready_to_reboot = ATOMIC_
- void (*_crash_smp_send_stop)(void) = NULL;
- #endif
- 
-+static void machine_kexec_print_args(void)
-+{
-+	unsigned long argc = (int)kexec_args[0];
-+	int i;
-+
-+	pr_info("kexec_args[0] (argc): %lu\n", argc);
-+	pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
-+	pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
-+	pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
-+
-+	for (i = 0; i < argc; i++) {
-+		pr_info("kexec_argv[%d] = %p, %s\n",
-+				i, kexec_argv[i], kexec_argv[i]);
-+	}
-+}
-+
-+static void machine_kexec_init_argv(struct kimage *image)
-+{
-+	void __user *buf = NULL;
-+	size_t bufsz;
-+	size_t size;
-+	int i;
-+
-+	bufsz = 0;
-+	for (i = 0; i < image->nr_segments; i++) {
-+		struct kexec_segment *seg;
-+
-+		seg = &image->segment[i];
-+		if (seg->bufsz < 6)
-+			continue;
-+
-+		if (strncmp((char *) seg->buf, "kexec ", 6))
-+			continue;
-+
-+		buf = seg->buf;
-+		bufsz = seg->bufsz;
-+		break;
-+	}
-+
-+	if (!buf)
-+		return;
-+
-+	size = KEXEC_COMMAND_LINE_SIZE;
-+	size = min(size, bufsz);
-+	if (size < bufsz)
-+		pr_warn("kexec command line truncated to %zd bytes\n", size);
-+
-+	/* Copy to kernel space */
-+	copy_from_user(kexec_argv_buf, buf, size);
-+	kexec_argv_buf[size - 1] = 0;
-+}
-+
-+static void machine_kexec_parse_argv(struct kimage *image)
-+{
-+	char *reboot_code_buffer;
-+	int reloc_delta;
-+	char *ptr;
-+	int argc;
-+	int i;
-+
-+	ptr = kexec_argv_buf;
-+	argc = 0;
-+
-+	/*
-+	 * convert command line string to array of parameters
-+	 * (as bootloader does).
-+	 */
-+	while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
-+		if (*ptr == ' ') {
-+			*ptr++ = '\0';
-+			continue;
-+		}
-+
-+		kexec_argv[argc++] = ptr;
-+		ptr = strchr(ptr, ' ');
-+	}
-+
-+	if (!argc)
-+		return;
-+
-+	kexec_args[0] = argc;
-+	kexec_args[1] = (unsigned long)kexec_argv;
-+	kexec_args[2] = 0;
-+	kexec_args[3] = 0;
-+
-+	reboot_code_buffer = page_address(image->control_code_page);
-+	reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
-+
-+	kexec_args[1] += reloc_delta;
-+	for (i = 0; i < argc; i++)
-+		kexec_argv[i] += reloc_delta;
-+}
-+
- int
- machine_kexec_prepare(struct kimage *kimage)
- {
-+	/*
-+	 * Whenever arguments passed from kexec-tools, Init the arguments as
-+	 * the original ones to try avoiding booting failure.
-+	 */
-+
-+	kexec_args[0] = fw_arg0;
-+	kexec_args[1] = fw_arg1;
-+	kexec_args[2] = fw_arg2;
-+	kexec_args[3] = fw_arg3;
-+
-+	machine_kexec_init_argv(kimage);
-+	machine_kexec_parse_argv(kimage);
-+
- 	if (_machine_kexec_prepare)
- 		return _machine_kexec_prepare(kimage);
- 	return 0;
-@@ -67,10 +170,12 @@ machine_kexec(struct kimage *image)
- 	unsigned long *ptr;
- 
- 	reboot_code_buffer =
--	  (unsigned long)page_address(image->control_code_page);
-+		(unsigned long)page_address(image->control_code_page);
-+	pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
- 
- 	kexec_start_address =
- 		(unsigned long) phys_to_virt(image->start);
-+	pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
- 
- 	if (image->type == KEXEC_TYPE_DEFAULT) {
- 		kexec_indirection_page =
-@@ -78,9 +183,19 @@ machine_kexec(struct kimage *image)
- 	} else {
- 		kexec_indirection_page = (unsigned long)&image->head;
- 	}
-+	pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
- 
--	memcpy((void*)reboot_code_buffer, relocate_new_kernel,
--	       relocate_new_kernel_size);
-+	pr_info("Where is memcpy: %p\n", memcpy);
-+	pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
-+		(void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
-+	pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
-+		(void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
-+	memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
-+	       KEXEC_RELOCATE_NEW_KERNEL_SIZE);
-+
-+	pr_info("Before _print_args().\n");
-+	machine_kexec_print_args();
-+	pr_info("Before eval loop.\n");
- 
- 	/*
- 	 * The generic kexec code builds a page list with physical
-@@ -102,15 +217,16 @@ machine_kexec(struct kimage *image)
- 	/*
- 	 * we do not want to be bothered.
- 	 */
-+	pr_info("Before irq_disable.\n");
- 	local_irq_disable();
- 
--	printk("Will call new kernel at %08lx\n", image->start);
--	printk("Bye ...\n");
-+	pr_info("Will call new kernel at %08lx\n", image->start);
-+	pr_info("Bye ...\n");
- 	__flush_cache_all();
- #ifdef CONFIG_SMP
- 	/* All secondary cpus now may jump to kexec_wait cycle */
- 	relocated_kexec_smp_wait = reboot_code_buffer +
--		(void *)(kexec_smp_wait - relocate_new_kernel);
-+		(void *)(kexec_smp_wait - kexec_relocate_new_kernel);
- 	smp_wmb();
- 	atomic_set(&kexec_ready_to_reboot, 1);
- #endif
---- /dev/null
-+++ b/arch/mips/kernel/machine_kexec.h
-@@ -0,0 +1,20 @@
-+#ifndef _MACHINE_KEXEC_H
-+#define _MACHINE_KEXEC_H
-+
-+#ifndef __ASSEMBLY__
-+extern const unsigned char kexec_relocate_new_kernel[];
-+extern unsigned long kexec_relocate_new_kernel_end;
-+extern unsigned long kexec_start_address;
-+extern unsigned long kexec_indirection_page;
-+
-+extern char kexec_argv_buf[];
-+extern char *kexec_argv[];
-+
-+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE	((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
-+#endif /* !__ASSEMBLY__ */
-+
-+#define KEXEC_COMMAND_LINE_SIZE		256
-+#define KEXEC_ARGV_SIZE			(KEXEC_COMMAND_LINE_SIZE / 16)
-+#define KEXEC_MAX_ARGC			(KEXEC_ARGV_SIZE / sizeof(long))
-+
-+#endif
---- a/arch/mips/kernel/relocate_kernel.S
-+++ b/arch/mips/kernel/relocate_kernel.S
-@@ -12,8 +12,9 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
- #include <asm/addrspace.h>
-+#include "machine_kexec.h"
- 
--LEAF(relocate_new_kernel)
-+LEAF(kexec_relocate_new_kernel)
- 	PTR_L a0,	arg0
- 	PTR_L a1,	arg1
- 	PTR_L a2,	arg2
-@@ -98,7 +99,7 @@ done:
- #endif
- 	/* jump to kexec_start_address */
- 	j		s1
--	END(relocate_new_kernel)
-+	END(kexec_relocate_new_kernel)
- 
- #ifdef CONFIG_SMP
- /*
-@@ -184,9 +185,15 @@ kexec_indirection_page:
- 	PTR		0
- 	.size		kexec_indirection_page, PTRSIZE
- 
--relocate_new_kernel_end:
-+kexec_argv_buf:
-+	EXPORT(kexec_argv_buf)
-+	.skip		KEXEC_COMMAND_LINE_SIZE
-+	.size		kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
-+
-+kexec_argv:
-+	EXPORT(kexec_argv)
-+	.skip		KEXEC_ARGV_SIZE
-+	.size		kexec_argv, KEXEC_ARGV_SIZE
- 
--relocate_new_kernel_size:
--	EXPORT(relocate_new_kernel_size)
--	PTR		relocate_new_kernel_end - relocate_new_kernel
--	.size		relocate_new_kernel_size, PTRSIZE
-+kexec_relocate_new_kernel_end:
-+	EXPORT(kexec_relocate_new_kernel_end)
diff --git a/target/linux/generic/pending-4.9/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-4.9/332-arc-add-OWRTDTB-section.patch
deleted file mode 100644
index ca89f87594..0000000000
--- a/target/linux/generic/pending-4.9/332-arc-add-OWRTDTB-section.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Subject: openwrt: arc - add OWRTDTB section
-
-This change allows OpenWRT to patch resulting kernel binary with
-external .dtb.
-
-That allows us to re-use exactky the same vmlinux on different boards
-given its ARC core configurations match (at least cache line sizes etc).
-
-""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external
-.dtb right after it, keeping the string in place.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
----
- arch/arc/kernel/head.S        | 10 ++++++++++
- arch/arc/kernel/setup.c       |  4 +++-
- arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
- 3 files changed, 26 insertions(+), 1 deletion(-)
-
---- a/arch/arc/kernel/head.S
-+++ b/arch/arc/kernel/head.S
-@@ -59,6 +59,16 @@
- #endif
- .endm
- 
-+; Here "patch-dtb" will embed external .dtb
-+; Note "patch-dtb" searches for ASCII "OWRTDTB:" string
-+; and pastes .dtb right after it, hense the string precedes
-+; __image_dtb symbol.
-+	.section .owrt, "aw",@progbits
-+	.ascii	"OWRTDTB:"
-+ENTRY(__image_dtb)
-+	.fill	0x4000
-+END(__image_dtb)
-+
- 	.section .init.text, "ax",@progbits
- 
- ;----------------------------------------------------------------
---- a/arch/arc/kernel/setup.c
-+++ b/arch/arc/kernel/setup.c
-@@ -444,7 +444,7 @@ ignore_uboot_args:
- #endif
- 
- 	if (use_embedded_dtb) {
--		machine_desc = setup_machine_fdt(__dtb_start);
-+		machine_desc = setup_machine_fdt(&__image_dtb);
- 		if (!machine_desc)
- 			panic("Embedded DT invalid\n");
- 	}
-@@ -460,6 +460,8 @@ ignore_uboot_args:
- 	}
- }
- 
-+extern struct boot_param_header __image_dtb;
-+
- void __init setup_arch(char **cmdline_p)
- {
- 	handle_uboot_args();
---- a/arch/arc/kernel/vmlinux.lds.S
-+++ b/arch/arc/kernel/vmlinux.lds.S
-@@ -30,6 +30,19 @@ SECTIONS
- 
- 	. = CONFIG_LINUX_LINK_BASE;
- 
-+	/*
-+	 * In OpenWRT we want to patch built binary embedding .dtb of choice.
-+	 * This is implemented with "patch-dtb" utility which searches for
-+	 * "OWRTDTB:" string in first 16k of image and if it is found
-+	 * copies .dtb right after mentioned string.
-+	 *
-+	 * Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it.
-+	 */
-+	.owrt : {
-+		*(.owrt)
-+		. = ALIGN(PAGE_SIZE);
-+	}
-+
- 	_int_vec_base_lds = .;
- 	.vector : {
- 		*(.vector)
diff --git a/target/linux/generic/pending-4.9/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-4.9/333-arc-enable-unaligned-access-in-kernel-mode.patch
deleted file mode 100644
index 4e0265aef5..0000000000
--- a/target/linux/generic/pending-4.9/333-arc-enable-unaligned-access-in-kernel-mode.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Subject: arc: enable unaligned access in kernel mode
-
-This enables misaligned access handling even in kernel mode.
-Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses
-here and there and to cope with that without fixing stuff in the drivers
-we're just gracefully handling it on ARC.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
----
- arch/arc/kernel/unaligned.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arc/kernel/unaligned.c
-+++ b/arch/arc/kernel/unaligned.c
-@@ -206,7 +206,7 @@ int misaligned_fixup(unsigned long addre
- 	char buf[TASK_COMM_LEN];
- 
- 	/* handle user mode only and only if enabled by sysadmin */
--	if (!user_mode(regs) || !unaligned_enabled)
-+	if (!unaligned_enabled)
- 		return 1;
- 
- 	if (no_unaligned_warning) {
diff --git a/target/linux/generic/pending-4.9/340-MIPS-mm-remove-mips_dma_mapping_error.patch b/target/linux/generic/pending-4.9/340-MIPS-mm-remove-mips_dma_mapping_error.patch
deleted file mode 100644
index 4091542581..0000000000
--- a/target/linux/generic/pending-4.9/340-MIPS-mm-remove-mips_dma_mapping_error.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 5 Dec 2017 12:34:31 +0100
-Subject: [PATCH] MIPS: mm: remove mips_dma_mapping_error
-
-dma_mapping_error() already checks if ops->mapping_error is a null
-pointer
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/mm/dma-default.c
-+++ b/arch/mips/mm/dma-default.c
-@@ -394,11 +394,6 @@ static void mips_dma_sync_sg_for_device(
- 	}
- }
- 
--int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
--{
--	return 0;
--}
--
- int mips_dma_supported(struct device *dev, u64 mask)
- {
- 	return plat_dma_supported(dev, mask);
-@@ -427,7 +422,6 @@ static struct dma_map_ops mips_default_d
- 	.sync_single_for_device = mips_dma_sync_single_for_device,
- 	.sync_sg_for_cpu = mips_dma_sync_sg_for_cpu,
- 	.sync_sg_for_device = mips_dma_sync_sg_for_device,
--	.mapping_error = mips_dma_mapping_error,
- 	.dma_supported = mips_dma_supported
- };
- 
diff --git a/target/linux/generic/pending-4.9/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch b/target/linux/generic/pending-4.9/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
deleted file mode 100644
index 15788c7860..0000000000
--- a/target/linux/generic/pending-4.9/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 5 Dec 2017 12:46:01 +0100
-Subject: [PATCH] MIPS: mm: remove no-op dma_map_ops where possible
-
-If no post-DMA flush is required, and the platform does not provide
-plat_unmap_dma_mem(), there is no need to include unmap or sync_for_cpu
-ops.
-
-With this patch they are compiled out to improve icache footprint
-on devices that handle lots of DMA traffic (especially network routers).
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -214,6 +214,7 @@ config BMIPS_GENERIC
- 	select BRCMSTB_L2_IRQ
- 	select IRQ_MIPS_CPU
- 	select DMA_NONCOHERENT
-+	select DMA_UNMAP_POST_FLUSH
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_LITTLE_ENDIAN
- 	select SYS_SUPPORTS_BIG_ENDIAN
-@@ -339,6 +340,7 @@ config MACH_JAZZ
- 	select CSRC_R4K
- 	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
- 	select GENERIC_ISA_DMA
-+	select DMA_UNMAP_POST_FLUSH
- 	select HAVE_PCSPKR_PLATFORM
- 	select IRQ_MIPS_CPU
- 	select I8253
-@@ -1129,6 +1131,9 @@ config DMA_NONCOHERENT
- 	bool
- 	select NEED_DMA_MAP_STATE
- 
-+config DMA_UNMAP_POST_FLUSH
-+	bool
-+
- config NEED_DMA_MAP_STATE
- 	bool
- 
-@@ -1653,6 +1658,7 @@ config CPU_R10000
- 	select CPU_SUPPORTS_64BIT_KERNEL
- 	select CPU_SUPPORTS_HIGHMEM
- 	select CPU_SUPPORTS_HUGEPAGES
-+	select DMA_UNMAP_POST_FLUSH
- 	help
- 	  MIPS Technologies R10000-series processors.
- 
-@@ -1898,9 +1904,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
- 	bool
- 
- config SYS_HAS_CPU_MIPS32_R5
-+	select DMA_UNMAP_POST_FLUSH
- 	bool
- 
- config SYS_HAS_CPU_MIPS32_R6
-+	select DMA_UNMAP_POST_FLUSH
- 	bool
- 
- config SYS_HAS_CPU_MIPS64_R1
-@@ -1910,6 +1918,7 @@ config SYS_HAS_CPU_MIPS64_R2
- 	bool
- 
- config SYS_HAS_CPU_MIPS64_R6
-+	select DMA_UNMAP_POST_FLUSH
- 	bool
- 
- config SYS_HAS_CPU_R3000
---- a/arch/mips/mm/dma-default.c
-+++ b/arch/mips/mm/dma-default.c
-@@ -290,8 +290,9 @@ static inline void __dma_sync(struct pag
- 	} while (left);
- }
- 
--static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
--	size_t size, enum dma_data_direction direction, unsigned long attrs)
-+static void __maybe_unused
-+mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-+		    enum dma_data_direction direction, unsigned long attrs)
- {
- 	if (cpu_needs_post_dma_flush(dev))
- 		__dma_sync(dma_addr_to_page(dev, dma_addr),
-@@ -330,9 +331,10 @@ static dma_addr_t mips_dma_map_page(stru
- 	return plat_map_dma_mem_page(dev, page) + offset;
- }
- 
--static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
--	int nhwentries, enum dma_data_direction direction,
--	unsigned long attrs)
-+static void __maybe_unused
-+mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
-+		  int nhwentries, enum dma_data_direction direction,
-+		  unsigned long attrs)
- {
- 	int i;
- 	struct scatterlist *sg;
-@@ -346,8 +348,9 @@ static void mips_dma_unmap_sg(struct dev
- 	}
- }
- 
--static void mips_dma_sync_single_for_cpu(struct device *dev,
--	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-+static void __maybe_unused
-+mips_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-+			     size_t size, enum dma_data_direction direction)
- {
- 	if (cpu_needs_post_dma_flush(dev))
- 		__dma_sync(dma_addr_to_page(dev, dma_handle),
-@@ -363,9 +366,9 @@ static void mips_dma_sync_single_for_dev
- 			   dma_handle & ~PAGE_MASK, size, direction);
- }
- 
--static void mips_dma_sync_sg_for_cpu(struct device *dev,
--	struct scatterlist *sglist, int nelems,
--	enum dma_data_direction direction)
-+static void __maybe_unused
-+mips_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist,
-+			 int nelems, enum dma_data_direction direction)
- {
- 	int i;
- 	struct scatterlist *sg;
-@@ -415,12 +418,14 @@ static struct dma_map_ops mips_default_d
- 	.free = mips_dma_free_coherent,
- 	.mmap = mips_dma_mmap,
- 	.map_page = mips_dma_map_page,
--	.unmap_page = mips_dma_unmap_page,
- 	.map_sg = mips_dma_map_sg,
-+#ifdef CONFIG_DMA_UNMAP_POST_FLUSH
-+	.unmap_page = mips_dma_unmap_page,
- 	.unmap_sg = mips_dma_unmap_sg,
- 	.sync_single_for_cpu = mips_dma_sync_single_for_cpu,
--	.sync_single_for_device = mips_dma_sync_single_for_device,
- 	.sync_sg_for_cpu = mips_dma_sync_sg_for_cpu,
-+#endif
-+	.sync_single_for_device = mips_dma_sync_single_for_device,
- 	.sync_sg_for_device = mips_dma_sync_sg_for_device,
- 	.dma_supported = mips_dma_supported
- };
diff --git a/target/linux/generic/pending-4.9/400-mtd-add-rootfs-split-support.patch b/target/linux/generic/pending-4.9/400-mtd-add-rootfs-split-support.patch
deleted file mode 100644
index c9e3ca3713..0000000000
--- a/target/linux/generic/pending-4.9/400-mtd-add-rootfs-split-support.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: make rootfs split/detection more generic - patch can be moved to generic-2.6 after testing on other platforms
-
-lede-commit: 328e660b31f0937d52c5ae3d6e7029409918a9df
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/Kconfig            | 17 +++++++++++++++++
- drivers/mtd/mtdpart.c          | 35 +++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 3 files changed, 54 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -12,6 +12,23 @@ menuconfig MTD
- 
- if MTD
- 
-+menu "OpenWrt specific MTD options"
-+
-+config MTD_ROOTFS_ROOT_DEV
-+	bool "Automatically set 'rootfs' partition to be root filesystem"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE
-+	bool "Automatically split firmware partition for kernel+rootfs"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE_NAME
-+	string "Firmware partition name"
-+	depends on MTD_SPLIT_FIRMWARE
-+	default "firmware"
-+
-+endmenu
-+
- config MTD_TESTS
- 	tristate "MTD tests support (DANGEROUS)"
- 	depends on m
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -29,11 +29,13 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/magic.h>
- #include <linux/of.h>
- #include <linux/err.h>
- #include <linux/of.h>
- 
- #include "mtdcore.h"
-+#include "mtdsplit/mtdsplit.h"
- 
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
-@@ -53,6 +55,8 @@ struct mtd_part {
- 	struct list_head list;
- };
- 
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-  * the pointer to that structure.
-@@ -650,6 +654,7 @@ int mtd_add_partition(struct mtd_info *p
- 	mutex_unlock(&mtd_partitions_mutex);
- 
- 	add_mtd_device(&new->mtd);
-+	mtd_partition_split(parent, new);
- 
- 	mtd_add_partition_attrs(new);
- 
-@@ -728,6 +733,29 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
-+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#else
-+#define SPLIT_FIRMWARE_NAME	"unused"
-+#endif
-+
-+static void split_firmware(struct mtd_info *master, struct mtd_part *part)
-+{
-+}
-+
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-+{
-+	static int rootfs_found = 0;
-+
-+	if (rootfs_found)
-+		return;
-+
-+	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
-+	    !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
-+	    !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
-+		split_firmware(master, part);
-+}
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -759,6 +787,7 @@ int add_mtd_partitions(struct mtd_info *
- 		mutex_unlock(&mtd_partitions_mutex);
- 
- 		add_mtd_device(&slave->mtd);
-+		mtd_partition_split(master, slave);
- 		mtd_add_partition_attrs(slave);
- 		/* Look for subpartitions */
- 		parse_mtd_partitions(&slave->mtd, parts[i].types, NULL);
diff --git a/target/linux/generic/pending-4.9/401-mtd-add-support-for-different-partition-parser-types.patch b/target/linux/generic/pending-4.9/401-mtd-add-support-for-different-partition-parser-types.patch
deleted file mode 100644
index 5a9d3f7560..0000000000
--- a/target/linux/generic/pending-4.9/401-mtd-add-support-for-different-partition-parser-types.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add support for different partition parser types
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          |   56 ++++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |   11 ++++++++
- 2 files changed, 67 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -56,6 +56,10 @@ struct mtd_part {
- };
- 
- static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+					enum mtd_parser_type type,
-+					const struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data);
- 
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-@@ -733,6 +737,36 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
-+static int
-+run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
-+{
-+	struct mtd_partition *parts;
-+	int nr_parts;
-+	int i;
-+
-+	nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, (const struct mtd_partition **)&parts,
-+						NULL);
-+	if (nr_parts <= 0)
-+		return nr_parts;
-+
-+	if (WARN_ON(!parts))
-+		return 0;
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		/* adjust partition offsets */
-+		parts[i].offset += slave->offset;
-+
-+		mtd_add_partition(slave->parent,
-+				  parts[i].name,
-+				  parts[i].offset,
-+				  parts[i].size);
-+	}
-+
-+	kfree(parts);
-+
-+	return nr_parts;
-+}
-+
- #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #else
-@@ -1109,6 +1143,61 @@ void mtd_part_parser_cleanup(struct mtd_
- 	}
- }
- 
-+static struct mtd_part_parser *
-+get_partition_parser_by_type(enum mtd_parser_type type,
-+			     struct mtd_part_parser *start)
-+{
-+	struct mtd_part_parser *p, *ret = NULL;
-+
-+	spin_lock(&part_parser_lock);
-+
-+	p = list_prepare_entry(start, &part_parsers, list);
-+	if (start)
-+		mtd_part_parser_put(start);
-+
-+	list_for_each_entry_continue(p, &part_parsers, list) {
-+		if (p->type == type && try_module_get(p->owner)) {
-+			ret = p;
-+			break;
-+		}
-+	}
-+
-+	spin_unlock(&part_parser_lock);
-+
-+	return ret;
-+}
-+
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+					enum mtd_parser_type type,
-+					const struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data)
-+{
-+	struct mtd_part_parser *prev = NULL;
-+	int ret = 0;
-+
-+	while (1) {
-+		struct mtd_part_parser *parser;
-+
-+		parser = get_partition_parser_by_type(type, prev);
-+		if (!parser)
-+			break;
-+
-+		ret = (*parser->parse_fn)(master, pparts, data);
-+
-+		if (ret > 0) {
-+			mtd_part_parser_put(parser);
-+			printk(KERN_NOTICE
-+			       "%d %s partitions found on MTD device %s\n",
-+			       ret, parser->name, master->name);
-+			break;
-+		}
-+
-+		prev = parser;
-+	}
-+
-+	return ret;
-+}
-+
- int mtd_is_partition(const struct mtd_info *mtd)
- {
- 	struct mtd_part *part;
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -73,6 +73,10 @@ struct mtd_part_parser_data {
-  * Functions dealing with the various ways of partitioning the space
-  */
- 
-+enum mtd_parser_type {
-+	MTD_PARSER_TYPE_DEVICE = 0,
-+};
-+
- struct mtd_part_parser {
- 	struct list_head list;
- 	struct module *owner;
-@@ -81,6 +85,7 @@ struct mtd_part_parser {
- 	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
- 			struct mtd_part_parser_data *);
- 	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
-+	enum mtd_parser_type type;
- };
- 
- /* Container for passing around a set of parsed partitions */
diff --git a/target/linux/generic/pending-4.9/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch b/target/linux/generic/pending-4.9/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
deleted file mode 100644
index 42d95360fd..0000000000
--- a/target/linux/generic/pending-4.9/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.10: allow to use partition parsers for rootfs and firmware split
-
-lede-commit: 3b71cd94bc9517bc25267dccb393b07d4b54564e
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          | 37 +++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 2 files changed, 39 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -775,6 +775,7 @@ run_parsers_by_type(struct mtd_part *sla
- 
- static void split_firmware(struct mtd_info *master, struct mtd_part *part)
- {
-+	run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
- }
- 
- static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-@@ -784,6 +785,12 @@ static void mtd_partition_split(struct m
- 	if (rootfs_found)
- 		return;
- 
-+	if (!strcmp(part->mtd.name, "rootfs")) {
-+		run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+
-+		rootfs_found = 1;
-+	}
-+
- 	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
- 	    !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
- 	    !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -75,6 +75,8 @@ struct mtd_part_parser_data {
- 
- enum mtd_parser_type {
- 	MTD_PARSER_TYPE_DEVICE = 0,
-+	MTD_PARSER_TYPE_ROOTFS,
-+	MTD_PARSER_TYPE_FIRMWARE,
- };
- 
- struct mtd_part_parser {
diff --git a/target/linux/generic/pending-4.9/403-mtd-hook-mtdsplit-to-Kbuild.patch b/target/linux/generic/pending-4.9/403-mtd-hook-mtdsplit-to-Kbuild.patch
deleted file mode 100644
index 917cd9cafe..0000000000
--- a/target/linux/generic/pending-4.9/403-mtd-hook-mtdsplit-to-Kbuild.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: [PATCH] kernel/3.10: move squashfs check from rootfs split code into a separate file
-
-lede-commit: d89bea92b31b4e157a0fa438e75370f089f73427
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/Kconfig  | 2 ++
- drivers/mtd/Makefile | 2 ++
- 2 files changed, 4 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -27,6 +27,8 @@ config MTD_SPLIT_FIRMWARE_NAME
- 	depends on MTD_SPLIT_FIRMWARE
- 	default "firmware"
- 
-+source "drivers/mtd/mtdsplit/Kconfig"
-+
- endmenu
- 
- config MTD_TESTS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -6,6 +6,8 @@
- obj-$(CONFIG_MTD)		+= mtd.o
- mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
- 
-+obj-$(CONFIG_MTD_SPLIT)		+= mtdsplit/
-+
- obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
diff --git a/target/linux/generic/pending-4.9/404-mtd-add-more-helper-functions.patch b/target/linux/generic/pending-4.9/404-mtd-add-more-helper-functions.patch
deleted file mode 100644
index b59977455e..0000000000
--- a/target/linux/generic/pending-4.9/404-mtd-add-more-helper-functions.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.10: add separate rootfs partition parser
-
-lede-commit: daec7ad7688415156e2730e401503d09bd3acf91
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c          | 29 +++++++++++++++++++++++++++++
- include/linux/mtd/mtd.h        | 18 ++++++++++++++++++
- include/linux/mtd/partitions.h |  2 ++
- 3 files changed, 49 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -1222,6 +1222,24 @@ int mtd_is_partition(const struct mtd_in
- }
- EXPORT_SYMBOL_GPL(mtd_is_partition);
- 
-+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd)
-+{
-+	if (!mtd_is_partition(mtd))
-+		return (struct mtd_info *)mtd;
-+
-+	return mtd_to_part(mtd)->parent;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_master);
-+
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
-+{
-+	if (!mtd_is_partition(mtd))
-+		return 0;
-+
-+	return mtd_to_part(mtd)->offset;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_offset);
-+
- /* Returns the size of the entire flash chip */
- uint64_t mtd_get_device_size(const struct mtd_info *mtd)
- {
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -485,6 +485,24 @@ static inline uint32_t mtd_mod_by_eb(uin
- 	return do_div(sz, mtd->erasesize);
- }
- 
-+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round up to next erase block */
-+	return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
-+}
-+
-+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round down to the start of the current erase block */
-+	return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
-+}
-+
- static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
- {
- 	if (mtd->writesize_shift)
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -116,6 +116,8 @@ int mtd_is_partition(const struct mtd_in
- int mtd_add_partition(struct mtd_info *master, const char *name,
- 		      long long offset, long long length);
- int mtd_del_partition(struct mtd_info *master, int partno);
-+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
- uint64_t mtd_get_device_size(const struct mtd_info *mtd);
- 
- #endif
diff --git a/target/linux/generic/pending-4.9/411-mtd-partial_eraseblock_write.patch b/target/linux/generic/pending-4.9/411-mtd-partial_eraseblock_write.patch
deleted file mode 100644
index 5a59dfa0c6..0000000000
--- a/target/linux/generic/pending-4.9/411-mtd-partial_eraseblock_write.patch
+++ /dev/null
@@ -1,154 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mtd: implement write support for partitions covering only a part of an eraseblock (buffer data that would otherwise be erased)
-
-lede-commit: 87a8e8ac1067f58ba831c4aae443f3655c31cd80
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/mtdpart.c   | 90 ++++++++++++++++++++++++++++++++++++++++++++-----
- include/linux/mtd/mtd.h |  4 +++
- 2 files changed, 85 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -37,6 +37,8 @@
- #include "mtdcore.h"
- #include "mtdsplit/mtdsplit.h"
- 
-+#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
-+
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
- static DEFINE_MUTEX(mtd_partitions_mutex);
-@@ -246,13 +248,61 @@ static int part_erase(struct mtd_info *m
- 	struct mtd_part *part = mtd_to_part(mtd);
- 	int ret;
- 
-+
-+	instr->partial_start = false;
-+	if (mtd->flags & MTD_ERASE_PARTIAL) {
-+		size_t readlen = 0;
-+		u64 mtd_ofs;
-+
-+		instr->erase_buf = kmalloc(part->parent->erasesize, GFP_ATOMIC);
-+		if (!instr->erase_buf)
-+			return -ENOMEM;
-+
-+		mtd_ofs = part->offset + instr->addr;
-+		instr->erase_buf_ofs = do_div(mtd_ofs, part->parent->erasesize);
-+
-+		if (instr->erase_buf_ofs > 0) {
-+			instr->addr -= instr->erase_buf_ofs;
-+			ret = mtd_read(part->parent,
-+				instr->addr + part->offset,
-+				part->parent->erasesize,
-+				&readlen, instr->erase_buf);
-+
-+			instr->len += instr->erase_buf_ofs;
-+			instr->partial_start = true;
-+		} else {
-+			mtd_ofs = part->offset + part->mtd.size;
-+			instr->erase_buf_ofs = part->parent->erasesize -
-+				do_div(mtd_ofs, part->parent->erasesize);
-+
-+			if (instr->erase_buf_ofs > 0) {
-+				instr->len += instr->erase_buf_ofs;
-+				ret = mtd_read(part->parent,
-+					part->offset + instr->addr +
-+					instr->len - part->parent->erasesize,
-+					part->parent->erasesize, &readlen,
-+					instr->erase_buf);
-+			} else {
-+				ret = 0;
-+			}
-+		}
-+		if (ret < 0) {
-+			kfree(instr->erase_buf);
-+			return ret;
-+		}
-+
-+	}
-+
- 	instr->addr += part->offset;
- 	ret = part->parent->_erase(part->parent, instr);
- 	if (ret) {
- 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
- 			instr->fail_addr -= part->offset;
- 		instr->addr -= part->offset;
-+		if (mtd->flags & MTD_ERASE_PARTIAL)
-+			kfree(instr->erase_buf);
- 	}
-+
- 	return ret;
- }
- 
-@@ -260,6 +310,25 @@ void mtd_erase_callback(struct erase_inf
- {
- 	if (instr->mtd->_erase == part_erase) {
- 		struct mtd_part *part = mtd_to_part(instr->mtd);
-+		size_t wrlen = 0;
-+
-+		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
-+			if (instr->partial_start) {
-+				part->parent->_write(part->parent,
-+					instr->addr, instr->erase_buf_ofs,
-+					&wrlen, instr->erase_buf);
-+				instr->addr += instr->erase_buf_ofs;
-+			} else {
-+				instr->len -= instr->erase_buf_ofs;
-+				part->parent->_write(part->parent,
-+					instr->addr + instr->len,
-+					instr->erase_buf_ofs, &wrlen,
-+					instr->erase_buf +
-+					part->parent->erasesize -
-+					instr->erase_buf_ofs);
-+			}
-+			kfree(instr->erase_buf);
-+		}
- 
- 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
- 			instr->fail_addr -= part->offset;
-@@ -566,19 +635,22 @@ static struct mtd_part *allocate_partiti
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- 		/* Doesn't start on a boundary of major erase size */
--		/* FIXME: Let it be writable if it is on a boundary of
--		 * _minor_ erase size though */
--		slave->mtd.flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
--			part->name);
-+		slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+		if (((u32)slave->mtd.size) > parent->erasesize)
-+			slave->mtd.flags &= ~MTD_WRITEABLE;
-+		else
-+			slave->mtd.erasesize = slave->mtd.size;
- 	}
- 
--	tmp = slave->mtd.size;
-+	tmp = slave->offset + slave->mtd.size;
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
--		slave->mtd.flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
--			part->name);
-+		slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+
-+		if ((u32)slave->mtd.size > parent->erasesize)
-+			slave->mtd.flags &= ~MTD_WRITEABLE;
-+		else
-+			slave->mtd.erasesize = slave->mtd.size;
- 	}
- 
- 	mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -55,6 +55,10 @@ struct erase_info {
- 	u_long priv;
- 	u_char state;
- 	struct erase_info *next;
-+
-+	u8 *erase_buf;
-+	u32 erase_buf_ofs;
-+	bool partial_start;
- };
- 
- struct mtd_erase_region_info {
diff --git a/target/linux/generic/pending-4.9/412-mtd-partial_eraseblock_unlock.patch b/target/linux/generic/pending-4.9/412-mtd-partial_eraseblock_unlock.patch
deleted file mode 100644
index 1e8c90931c..0000000000
--- a/target/linux/generic/pending-4.9/412-mtd-partial_eraseblock_unlock.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: mtd: allow partial block unlock
-
-This allows sysupgrade for devices such as the Gateworks Avila/Cambria
-product families based on the ixp4xx using the redboot bootloader with
-combined FIS directory and RedBoot config partitions on larger FLASH
-devices with larger eraseblocks.
-
-This second iteration of this patch addresses previous issues:
-- whitespace breakage fixed
-- unlock in all scenarios
-- simplification and fix logic bug
-
-[john@phrozen.org: this should be moved to the ixp4xx folder]
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/mtd/mtdpart.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -348,7 +348,16 @@ static int part_lock(struct mtd_info *mt
- static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
- 	struct mtd_part *part = mtd_to_part(mtd);
--	return part->parent->_unlock(part->parent, ofs + part->offset, len);
-+
-+	ofs += part->offset;
-+
-+	if (mtd->flags & MTD_ERASE_PARTIAL) {
-+		/* round up len to next erasesize and round down offset to prev block */
-+		len = (mtd_div_by_eb(len, part->parent) + 1) * part->parent->erasesize;
-+		ofs &= ~(part->parent->erasesize - 1);
-+	}
-+
-+	return part->parent->_unlock(part->parent, ofs, len);
- }
- 
- static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
diff --git a/target/linux/generic/pending-4.9/419-mtd-redboot-add-of_match_table-with-DT-binding.patch b/target/linux/generic/pending-4.9/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
deleted file mode 100644
index 4da571a60f..0000000000
--- a/target/linux/generic/pending-4.9/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] mtd: redboot: add of_match_table with DT binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows parsing RedBoot compatible partitions for properly described
-flash device in DT.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -29,6 +29,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/module.h>
-+#include <linux/mod_devicetable.h>
- 
- struct fis_image_desc {
-     unsigned char name[16];      // Null terminated name
-@@ -289,9 +290,16 @@ static int parse_redboot_partitions(stru
- 	return ret;
- }
- 
-+static const struct of_device_id redboot_parser_of_match_table[] = {
-+	{ .compatible = "ecoscentric,redboot-fis-partitions" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, redboot_parser_of_match_table);
-+
- static struct mtd_part_parser redboot_parser = {
- 	.parse_fn = parse_redboot_partitions,
- 	.name = "RedBoot",
-+	.of_match_table = redboot_parser_of_match_table,
- };
- module_mtd_part_parser(redboot_parser);
- 
diff --git a/target/linux/generic/pending-4.9/420-mtd-redboot_space.patch b/target/linux/generic/pending-4.9/420-mtd-redboot_space.patch
deleted file mode 100644
index 6a612a0e75..0000000000
--- a/target/linux/generic/pending-4.9/420-mtd-redboot_space.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable)
-
-[john@phrozen.org: used by ixp and others]
-
-lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/redboot.c | 19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -266,14 +266,21 @@ static int parse_redboot_partitions(stru
- #endif
- 		names += strlen(names)+1;
- 
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
--			i++;
--			parts[i].offset = parts[i-1].size + parts[i-1].offset;
--			parts[i].size = fl->next->img->flash_base - parts[i].offset;
--			parts[i].name = nullname;
--		}
-+			if (!strcmp(parts[i].name, "rootfs")) {
-+				parts[i].size = fl->next->img->flash_base;
-+				parts[i].size &= ~(master->erasesize - 1);
-+				parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+				nrparts--;
-+			} else {
-+				i++;
-+				parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+				parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+				parts[i].name = nullname;
- #endif
-+			}
-+		}
- 		tmp_fl = fl;
- 		fl = fl->next;
- 		kfree(tmp_fl);
diff --git a/target/linux/generic/pending-4.9/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-4.9/430-mtd-add-myloader-partition-parser.patch
deleted file mode 100644
index eb969a0d91..0000000000
--- a/target/linux/generic/pending-4.9/430-mtd-add-myloader-partition-parser.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: Add myloader partition table parser
-
-[john@phozen.org: shoud be upstreamable]
-
-lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/mtd/Kconfig  | 16 ++++++++++++++++
- drivers/mtd/Makefile |  1 +
- 2 files changed, 17 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -178,6 +178,22 @@ menu "Partition parsers"
- source "drivers/mtd/parsers/Kconfig"
- endmenu
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on ADM5120 || ATH25 || ATH79
-+	---help---
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the 
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- 
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y				+= parsers/
- 
- # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/generic/pending-4.9/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-4.9/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
deleted file mode 100644
index cbd185e0ae..0000000000
--- a/target/linux/generic/pending-4.9/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -30,6 +30,33 @@ struct trx_header {
- 	uint32_t offset[3];
- } __packed;
- 
-+/*
-+ * Calculate real end offset (address) for a given amount of data. It checks
-+ * all blocks skipping bad ones.
-+ */
-+static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes)
-+{
-+	size_t real_offset = 0;
-+
-+	if (mtd_block_isbad(mtd, real_offset))
-+		pr_warn("Base offset shouldn't be at bad block");
-+
-+	while (bytes >= mtd->erasesize) {
-+		bytes -= mtd->erasesize;
-+		real_offset += mtd->erasesize;
-+		while (mtd_block_isbad(mtd, real_offset)) {
-+			real_offset += mtd->erasesize;
-+
-+			if (real_offset >= mtd->size)
-+				return real_offset - mtd->erasesize;
-+		}
-+	}
-+
-+	real_offset += bytes;
-+
-+	return real_offset;
-+}
-+
- static const char *parser_trx_data_part_name(struct mtd_info *master,
- 					     size_t offset)
- {
-@@ -84,21 +111,21 @@ static int parser_trx_parse(struct mtd_i
- 	if (trx.offset[2]) {
- 		part = &parts[curr_part++];
- 		part->name = "loader";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
- 		part->name = "linux";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
--		part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
-+		part->name = parser_trx_data_part_name(mtd, part->offset);
- 		i++;
- 	}
- 
diff --git a/target/linux/generic/pending-4.9/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-4.9/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
deleted file mode 100644
index 3970641555..0000000000
--- a/target/linux/generic/pending-4.9/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: mtd: bcm47xxpart: detect T_Meter partition
-
-It can be found on many Netgear devices. It consists of many 0x30 blocks
-starting with 4D 54.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -40,6 +40,7 @@
- #define NVRAM_HEADER			0x48534C46	/* FLSH */
- #define POT_MAGIC1			0x54544f50	/* POTT */
- #define POT_MAGIC2			0x504f		/* OP */
-+#define T_METER_MAGIC			0x4D540000	/* MT */
- #define ML_MAGIC1			0x39685a42
- #define ML_MAGIC2			0x26594131
- #define TRX_MAGIC			0x30524448
-@@ -183,6 +184,15 @@ static int bcm47xxpart_parse(struct mtd_
- 					     MTD_WRITEABLE);
- 			continue;
- 		}
-+
-+		/* T_Meter */
-+		if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
-+			bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
-+					     MTD_WRITEABLE);
-+			continue;
-+		}
- 
- 		/* TRX */
- 		if (buf[0x000 / 4] == TRX_MAGIC) {
diff --git a/target/linux/generic/pending-4.9/440-block2mtd_init.patch b/target/linux/generic/pending-4.9/440-block2mtd_init.patch
deleted file mode 100644
index 8834788732..0000000000
--- a/target/linux/generic/pending-4.9/440-block2mtd_init.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: block2mtd
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/devices/block2mtd.c | 30 ++++++++++++++++++++----------
- 1 file changed, 20 insertions(+), 10 deletions(-)
-
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -26,6 +26,7 @@
- #include <linux/list.h>
- #include <linux/init.h>
- #include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
- #include <linux/mutex.h>
- #include <linux/mount.h>
- #include <linux/slab.h>
-@@ -219,7 +220,7 @@ static void block2mtd_free_device(struct
- 
- 
- static struct block2mtd_dev *add_device(char *devname, int erase_size,
--		int timeout)
-+		const char *mtdname, int timeout)
- {
- #ifndef MODULE
- 	int i;
-@@ -227,6 +228,7 @@ static struct block2mtd_dev *add_device(
- 	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
- 	struct block_device *bdev = ERR_PTR(-ENODEV);
- 	struct block2mtd_dev *dev;
-+	struct mtd_partition *part;
- 	char *name;
- 
- 	if (!devname)
-@@ -283,13 +285,16 @@ static struct block2mtd_dev *add_device(
- 
- 	/* Setup the MTD structure */
- 	/* make the name contain the block device in */
--	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
-+	if (!mtdname)
-+		mtdname = devname;
-+	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
- 	if (!name)
- 		goto err_destroy_mutex;
- 
-+	strcpy(name, mtdname);
- 	dev->mtd.name = name;
- 
--	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
-+	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
- 	dev->mtd.erasesize = erase_size;
- 	dev->mtd.writesize = 1;
- 	dev->mtd.writebufsize = PAGE_SIZE;
-@@ -302,7 +307,11 @@ static struct block2mtd_dev *add_device(
- 	dev->mtd.priv = dev;
- 	dev->mtd.owner = THIS_MODULE;
- 
--	if (mtd_device_register(&dev->mtd, NULL, 0)) {
-+	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
-+	part->name = name;
-+	part->offset = 0;
-+	part->size = dev->mtd.size;
-+	if (mtd_device_register(&dev->mtd, part, 1)) {
- 		/* Device didn't get added, so free the entry */
- 		goto err_destroy_mutex;
- 	}
-@@ -310,8 +319,7 @@ static struct block2mtd_dev *add_device(
- 	list_add(&dev->list, &blkmtd_device_list);
- 	pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
- 		dev->mtd.index,
--		dev->mtd.name + strlen("block2mtd: "),
--		dev->mtd.erasesize >> 10, dev->mtd.erasesize);
-+		mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
- 	return dev;
- 
- err_destroy_mutex:
-@@ -384,7 +392,7 @@ static int block2mtd_setup2(const char *
- 	/* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
- 	char buf[80 + 12 + 80 + 8];
- 	char *str = buf;
--	char *token[2];
-+	char *token[3];
- 	char *name;
- 	size_t erase_size = PAGE_SIZE;
- 	unsigned long timeout = MTD_DEFAULT_TIMEOUT;
-@@ -398,7 +406,7 @@ static int block2mtd_setup2(const char *
- 	strcpy(str, val);
- 	kill_final_newline(str);
- 
--	for (i = 0; i < 2; i++)
-+	for (i = 0; i < 3; i++)
- 		token[i] = strsep(&str, ",");
- 
- 	if (str) {
-@@ -424,8 +432,10 @@ static int block2mtd_setup2(const char *
- 			return 0;
- 		}
- 	}
-+	if (token[2] && (strlen(token[2]) + 1 > 80))
-+		pr_err("mtd device name too long\n");
- 
--	add_device(name, erase_size, timeout);
-+	add_device(name, erase_size, token[2], timeout);
- 
- 	return 0;
- }
-@@ -459,7 +469,7 @@ static int block2mtd_setup(const char *v
- 
- 
- module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
--MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
-+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
- 
- static int __init block2mtd_init(void)
- {
diff --git a/target/linux/generic/pending-4.9/441-block2mtd_probe.patch b/target/linux/generic/pending-4.9/441-block2mtd_probe.patch
deleted file mode 100644
index fee970ab61..0000000000
--- a/target/linux/generic/pending-4.9/441-block2mtd_probe.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: block2mtd
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/devices/block2mtd.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -392,7 +392,7 @@ static int block2mtd_setup2(const char *
- 	/* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
- 	char buf[80 + 12 + 80 + 8];
- 	char *str = buf;
--	char *token[3];
-+	char *token[4];
- 	char *name;
- 	size_t erase_size = PAGE_SIZE;
- 	unsigned long timeout = MTD_DEFAULT_TIMEOUT;
-@@ -406,7 +406,7 @@ static int block2mtd_setup2(const char *
- 	strcpy(str, val);
- 	kill_final_newline(str);
- 
--	for (i = 0; i < 3; i++)
-+	for (i = 0; i < 4; i++)
- 		token[i] = strsep(&str, ",");
- 
- 	if (str) {
-@@ -435,6 +435,9 @@ static int block2mtd_setup2(const char *
- 	if (token[2] && (strlen(token[2]) + 1 > 80))
- 		pr_err("mtd device name too long\n");
- 
-+	if (token[3] && kstrtoul(token[3], 0, &timeout))
-+		pr_err("invalid timeout\n");
-+
- 	add_device(name, erase_size, token[2], timeout);
- 
- 	return 0;
-@@ -469,7 +472,7 @@ static int block2mtd_setup(const char *v
- 
- 
- module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
--MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
-+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>[,<timeout>]]]\"");
- 
- static int __init block2mtd_init(void)
- {
diff --git a/target/linux/generic/pending-4.9/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch b/target/linux/generic/pending-4.9/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch
deleted file mode 100644
index feaf8cb25c..0000000000
--- a/target/linux/generic/pending-4.9/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 23 Feb 2018 17:12:16 +0100
-Subject: [PATCH] mtd: m25p80: allow fallback from spi_flash_read to regular
- SPI transfer
-
-Some flash controllers, e.g. on the ath79 platform can support a fast
-flash read via memory mapping, but only if the flash chip is in
-3-byte address mode.
-
-Since spi_flash_read_supported does not have access to the same data as
-spi_flash_read, the driver can't detect an unsupported call until m25p80
-has decided to use spi_flash_read.
-
-Allow the driver to indicate a fallback to a regular SPI transfer by
-returning -EOPNOTSUPP
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -155,9 +155,11 @@ static ssize_t m25p80_read(struct spi_no
- 		msg.data_nbits = m25p80_rx_nbits(nor);
- 
- 		ret = spi_flash_read(spi, &msg);
--		if (ret < 0)
--			return ret;
--		return msg.retlen;
-+		if (ret != -EOPNOTSUPP) {
-+			if (ret < 0)
-+				return ret;
-+			return msg.retlen;
-+		}
- 	}
- 
- 	spi_message_init(&m);
diff --git a/target/linux/generic/pending-4.9/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-4.9/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
deleted file mode 100644
index c52d7de762..0000000000
--- a/target/linux/generic/pending-4.9/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: disable cfi cmdset 0002 erase suspend
-
-on some platforms, erase suspend leads to data corruption and lockups when write
-ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
-rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
-simply disable erase suspend, as it will usually not produce any useful gain on
-the small filesystems used on embedded hardware.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -807,7 +807,7 @@ static int get_chip(struct map_info *map
- 		return 0;
- 
- 	case FL_ERASING:
--		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
-+		if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
- 		    !(mode == FL_READY || mode == FL_POINT ||
- 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
- 			goto sleep;
diff --git a/target/linux/generic/pending-4.9/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-4.9/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
deleted file mode 100644
index 905675e50c..0000000000
--- a/target/linux/generic/pending-4.9/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-From: George Kashperko <george@znau.edu.ua>
-Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data.
-
-Signed-off-by: George Kashperko <george@znau.edu.ua>
----
- drivers/mtd/chips/cfi_cmdset_0002.c |    1 +
- 1 file changed, 1 insertion(+)
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1829,6 +1829,7 @@ static int __xipram do_write_buffer(stru
- 
- 	/* Write Buffer Load */
- 	map_write(map, CMD(0x25), cmd_adr);
-+	(void) map_read(map, cmd_adr);
- 
- 	chip->state = FL_WRITING_TO_BUFFER;
- 
diff --git a/target/linux/generic/pending-4.9/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-4.9/465-m25p80-mx-disable-software-protection.patch
deleted file mode 100644
index 27adddeb30..0000000000
--- a/target/linux/generic/pending-4.9/465-m25p80-mx-disable-software-protection.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Disable software protection bits for Macronix flashes.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1601,6 +1601,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 
- 	if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
- 	    JEDEC_MFR(info) == SNOR_MFR_INTEL ||
-+	    JEDEC_MFR(info) == SNOR_MFR_MACRONIX ||
- 	    JEDEC_MFR(info) == SNOR_MFR_SST ||
- 	    info->flags & SPI_NOR_HAS_LOCK) {
- 		write_enable(nor);
diff --git a/target/linux/generic/pending-4.9/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch b/target/linux/generic/pending-4.9/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
deleted file mode 100644
index e1681d61dd..0000000000
--- a/target/linux/generic/pending-4.9/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Tue, 9 Jan 2018 20:41:48 +0100
-Subject: [PATCH] Revert "mtd: spi-nor: fix Spansion regressions (aliased with
- Winbond)"
-
-This reverts commit 67b9bcd36906e12a15ffec19463afbbd6a41660e.
-
-The underlying issue breaking Spansion flash has been fixed with "mtd: spi-nor:
-wait until lock/unlock operations are ready" and "mtd: spi-nor: wait for SR_WIP
-to clear on initial unlock", so we can support unlocking for Winbond flash
-again.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1603,6 +1603,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	    JEDEC_MFR(info) == SNOR_MFR_INTEL ||
- 	    JEDEC_MFR(info) == SNOR_MFR_MACRONIX ||
- 	    JEDEC_MFR(info) == SNOR_MFR_SST ||
-+	    JEDEC_MFR(info) == SNOR_MFR_WINBOND ||
- 	    info->flags & SPI_NOR_HAS_LOCK) {
- 		write_enable(nor);
- 		write_sr(nor, 0);
-@@ -1621,7 +1622,8 @@ int spi_nor_scan(struct spi_nor *nor, co
- 
- 	/* NOR protection support for STmicro/Micron chips and similar */
- 	if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
--			info->flags & SPI_NOR_HAS_LOCK) {
-+	    JEDEC_MFR(info) == SNOR_MFR_WINBOND ||
-+	    info->flags & SPI_NOR_HAS_LOCK) {
- 		nor->flash_lock = stm_lock;
- 		nor->flash_unlock = stm_unlock;
- 		nor->flash_is_locked = stm_is_locked;
diff --git a/target/linux/generic/pending-4.9/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch b/target/linux/generic/pending-4.9/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
deleted file mode 100644
index f4ccc5fc44..0000000000
--- a/target/linux/generic/pending-4.9/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 4 Nov 2017 07:40:23 +0100
-Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on
- flash size
-
-Some devices need 4K sectors to be able to deal with small flash chips.
-For instance, w25x05 is 64 KiB in size, and without 4K sectors, the
-entire chip is just one erase block.
-On bigger flash chip sizes, using 4K sectors can significantly slow down
-many operations, including using a writable filesystem. There are several
-platforms where it makes sense to use a single kernel on both kinds of
-devices.
-
-To support this properly, allow configuring an upper flash chip size
-limit for 4K sectors support.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -29,6 +29,17 @@ config MTD_SPI_NOR_USE_4K_SECTORS
- 	  Please note that some tools/drivers/filesystems may not work with
- 	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
- 
-+config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT
-+	int "Maximum flash chip size to use 4K sectors on (in KiB)"
-+	depends on MTD_SPI_NOR_USE_4K_SECTORS
-+	default "4096"
-+	help
-+	  There are many flash chips that support 4K sectors, but are so large
-+	  that using them significantly slows down writing large amounts of
-+	  data or using a writable filesystem.
-+	  Any flash chip larger than the size specified in this option will
-+	  not use 4K sectors.
-+
- config SPI_ATMEL_QUADSPI
- 	tristate "Atmel Quad SPI Controller"
- 	depends on ARCH_AT91 || (ARM && COMPILE_TEST && !ARCH_EBSA110)
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1648,10 +1648,12 @@ int spi_nor_scan(struct spi_nor *nor, co
- 
- #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- 	/* prefer "small sector" erase if possible */
--	if (info->flags & SECT_4K) {
-+	if ((info->flags & SECT_4K) && (mtd->size <=
-+	    CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
- 		nor->erase_opcode = SPINOR_OP_BE_4K;
- 		mtd->erasesize = 4096;
--	} else if (info->flags & SECT_4K_PMC) {
-+	} else if ((info->flags & SECT_4K_PMC) && (mtd->size <=
-+		   CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
- 		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
- 		mtd->erasesize = 4096;
- 	} else
diff --git a/target/linux/generic/pending-4.9/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch b/target/linux/generic/pending-4.9/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
deleted file mode 100644
index d54ee4f25a..0000000000
--- a/target/linux/generic/pending-4.9/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Robert Marko <robimarko@gmail.com>
-To: linux-mtd@lists.infradead.org
-Subject: mtd: spi-nor: Add Winbond w25q128jv support
-Date: Mon, 25 Jun 2018 13:17:48 +0200
-
-Datasheet:
-http://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf
-
-Testing done on Mikrotik Routerboard  wAP R board.
-It does not support Dual or Quad modes.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
-
-Changes in v2:
-	- Correct the title
----
- drivers/mtd/spi-nor/spi-nor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1152,6 +1152,11 @@ static const struct flash_info spi_nor_i
- 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- 	},
-+	{
-+		"w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
-+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+	},
- 	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
diff --git a/target/linux/generic/pending-4.9/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-4.9/476-mtd-spi-nor-add-eon-en25q128.patch
deleted file mode 100644
index ac1fda5159..0000000000
--- a/target/linux/generic/pending-4.9/476-mtd-spi-nor-add-eon-en25q128.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Piotr Dymacz <pepe2k@gmail.com>
-Subject: kernel/mtd: add support for EON EN25Q128
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -954,6 +954,7 @@ static const struct flash_info spi_nor_i
- 	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
- 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
- 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
-+	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
- 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
- 	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
- 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
diff --git a/target/linux/generic/pending-4.9/477-mtd-add-spi-nor-add-mx25u3235f.patch b/target/linux/generic/pending-4.9/477-mtd-add-spi-nor-add-mx25u3235f.patch
deleted file mode 100644
index 62f6314e93..0000000000
--- a/target/linux/generic/pending-4.9/477-mtd-add-spi-nor-add-mx25u3235f.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: André Valentin <avalentin@marcant.net>
-Subject: linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817
-
-Signed-off-by: André Valentin <avalentin@marcant.net>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1020,6 +1020,7 @@ static const struct flash_info spi_nor_i
- 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
-+	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024, 64, 0) },
- 	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
diff --git a/target/linux/generic/pending-4.9/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch b/target/linux/generic/pending-4.9/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch
deleted file mode 100644
index 011f4b4458..0000000000
--- a/target/linux/generic/pending-4.9/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From b02f3405c935a28200db26b63e42086057565cf4 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 31 Mar 2018 20:09:54 +0200
-Subject: [PATCH] mtd: spi-nor: Add support for XM25QH64A and XM25QH128A
-
-These devices are produced by Wuhan Xinxin Semiconductor Manufacturing
-Corp. (XMC) and found on some routers from Chinese manufactures.
-
-The data sheets can be found here:
-http://www.xmcwh.com/Uploads/2018-03-01/5a9799e4cb355.pdf
-http://www.xmcwh.com/Uploads/2018-02-05/5a77e6dbe968b.pdf
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1177,6 +1177,10 @@ static const struct flash_info spi_nor_i
- 	{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
- 	{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
- 	{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
-+
-+	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
-+	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ },
- };
- 
diff --git a/target/linux/generic/pending-4.9/479-mtd-spi-nor-add-eon-en25qh32.patch b/target/linux/generic/pending-4.9/479-mtd-spi-nor-add-eon-en25qh32.patch
deleted file mode 100644
index b8d5101514..0000000000
--- a/target/linux/generic/pending-4.9/479-mtd-spi-nor-add-eon-en25qh32.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -955,6 +955,7 @@ static const struct flash_info spi_nor_i
- 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
- 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
- 	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
-+	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
- 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
- 	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
- 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
diff --git a/target/linux/generic/pending-4.9/480-mtd-set-rootfs-to-be-root-dev.patch b/target/linux/generic/pending-4.9/480-mtd-set-rootfs-to-be-root-dev.patch
deleted file mode 100644
index 1bc958c2f7..0000000000
--- a/target/linux/generic/pending-4.9/480-mtd-set-rootfs-to-be-root-dev.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.1[02]: move MTD root device setup code to mtdcore
-
-The current code only allows to automatically set
-root device on MTD partitions. Move the code to MTD
-core to allow to use it with all MTD devices.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdcore.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -40,6 +40,7 @@
- #include <linux/slab.h>
- #include <linux/reboot.h>
- #include <linux/leds.h>
-+#include <linux/root_dev.h>
- 
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -570,6 +571,15 @@ int add_mtd_device(struct mtd_info *mtd)
- 	   of this try_ nonsense, and no bitching about it
- 	   either. :) */
- 	__module_get(THIS_MODULE);
-+
-+	if (!strcmp(mtd->name, "rootfs") &&
-+	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    ROOT_DEV == 0) {
-+		pr_notice("mtd: device %d (%s) set to be root filesystem\n",
-+			  mtd->index, mtd->name);
-+		ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
-+	}
-+
- 	return 0;
- 
- fail_added:
diff --git a/target/linux/generic/pending-4.9/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-4.9/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
deleted file mode 100644
index 168cfe50ee..0000000000
--- a/target/linux/generic/pending-4.9/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -1226,6 +1226,73 @@ static struct mtd_info * __init open_mtd
- 	return mtd;
- }
- 
-+/*
-+ * This function tries attaching mtd partitions named either "ubi" or "data"
-+ * during boot.
-+ */
-+static void __init ubi_auto_attach(void)
-+{
-+	int err;
-+	struct mtd_info *mtd;
-+	loff_t offset = 0;
-+	size_t len;
-+	char magic[4];
-+
-+	/* try attaching mtd device named "ubi" or "data" */
-+	mtd = open_mtd_device("ubi");
-+	if (IS_ERR(mtd))
-+		mtd = open_mtd_device("data");
-+
-+	if (IS_ERR(mtd))
-+		return;
-+
-+	/* get the first not bad block */
-+	if (mtd_can_have_bb(mtd))
-+		while (mtd_block_isbad(mtd, offset)) {
-+			offset += mtd->erasesize;
-+
-+			if (offset > mtd->size) {
-+				pr_err("UBI error: Failed to find a non-bad "
-+				       "block on mtd%d\n", mtd->index);
-+				goto cleanup;
-+			}
-+		}
-+
-+	/* check if the read from flash was successful */
-+	err = mtd_read(mtd, offset, 4, &len, (void *) magic);
-+	if ((err && !mtd_is_bitflip(err)) || len != 4) {
-+		pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* check for a valid ubi magic */
-+	if (strncmp(magic, "UBI#", 4)) {
-+		pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* don't auto-add media types where UBI doesn't makes sense */
-+	if (mtd->type != MTD_NANDFLASH &&
-+	    mtd->type != MTD_NORFLASH &&
-+	    mtd->type != MTD_DATAFLASH &&
-+	    mtd->type != MTD_MLCNANDFLASH)
-+		goto cleanup;
-+
-+	mutex_lock(&ubi_devices_mutex);
-+	pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
-+	err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
-+	mutex_unlock(&ubi_devices_mutex);
-+	if (err < 0) {
-+		pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	return;
-+
-+cleanup:
-+	put_mtd_device(mtd);
-+}
-+
- static int __init ubi_init(void)
- {
- 	int err, i, k;
-@@ -1309,6 +1376,12 @@ static int __init ubi_init(void)
- 		}
- 	}
- 
-+	/* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
-+	 * parameter was given */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    !ubi_is_module() && !mtd_devs)
-+		ubi_auto_attach();
-+
- 	err = ubiblock_init();
- 	if (err) {
- 		pr_err("UBI error: block: cannot initialize, error %d", err);
diff --git a/target/linux/generic/pending-4.9/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-4.9/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
deleted file mode 100644
index adc653ddcd..0000000000
--- a/target/linux/generic/pending-4.9/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-create ubiblock device for rootfs
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -635,6 +635,44 @@ static void __init ubiblock_create_from_
- 	}
- }
- 
-+#define UBIFS_NODE_MAGIC  0x06101831
-+static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
-+{
-+	int ret;
-+	uint32_t magic_of, magic;
-+	ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
-+	if (ret)
-+		return 0;
-+	magic = le32_to_cpu(magic_of);
-+	return magic == UBIFS_NODE_MAGIC;
-+}
-+
-+static void __init ubiblock_create_auto_rootfs(void)
-+{
-+	int ubi_num, ret, is_ubifs;
-+	struct ubi_volume_desc *desc;
-+	struct ubi_volume_info vi;
-+
-+	for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) {
-+		desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY);
-+		if (IS_ERR(desc))
-+			continue;
-+
-+		ubi_get_volume_info(desc, &vi);
-+		is_ubifs = ubi_vol_is_ubifs(desc);
-+		ubi_close_volume(desc);
-+		if (is_ubifs)
-+			break;
-+
-+		ret = ubiblock_create(&vi);
-+		if (ret)
-+			pr_err("UBI error: block: can't add '%s' volume, err=%d\n",
-+				vi.name, ret);
-+		/* always break if we get here */
-+		break;
-+	}
-+}
-+
- static void ubiblock_remove_all(void)
- {
- 	struct ubiblock *next;
-@@ -667,6 +705,10 @@ int __init ubiblock_init(void)
- 	 */
- 	ubiblock_create_from_param();
- 
-+	/* auto-attach "rootfs" volume if existing and non-ubifs */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV))
-+		ubiblock_create_auto_rootfs();
-+
- 	/*
- 	 * Block devices are only created upon user requests, so we ignore
- 	 * existing volumes.
diff --git a/target/linux/generic/pending-4.9/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-4.9/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
deleted file mode 100644
index 69a35c25e7..0000000000
--- a/target/linux/generic/pending-4.9/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- init/do_mounts.c | 26 +++++++++++++++++++++++++-
- 1 file changed, 25 insertions(+), 1 deletion(-)
-
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -438,7 +438,28 @@ retry:
- out:
- 	put_page(page);
- }
-- 
-+
-+static int __init mount_ubi_rootfs(void)
-+{
-+	int flags = MS_SILENT;
-+	int err, tried = 0;
-+
-+	while (tried < 2) {
-+		err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
-+					root_mount_data);
-+		switch (err) {
-+			case -EACCES:
-+				flags |= MS_RDONLY;
-+				tried++;
-+				break;
-+			default:
-+				return err;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+
- #ifdef CONFIG_ROOT_NFS
- 
- #define NFSROOT_TIMEOUT_MIN	5
-@@ -532,6 +553,10 @@ void __init mount_root(void)
- 			change_floppy("root floppy");
- 	}
- #endif
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+	if (!mount_ubi_rootfs())
-+		return;
-+#endif
- #ifdef CONFIG_BLOCK
- 	{
- 		int err = create_dev("/dev/root", ROOT_DEV);
diff --git a/target/linux/generic/pending-4.9/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-4.9/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
deleted file mode 100644
index 8b8bef2641..0000000000
--- a/target/linux/generic/pending-4.9/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -50,6 +50,7 @@
- #include <linux/scatterlist.h>
- #include <linux/idr.h>
- #include <asm/div64.h>
-+#include <linux/root_dev.h>
- 
- #include "ubi-media.h"
- #include "ubi.h"
-@@ -447,6 +448,15 @@ int ubiblock_create(struct ubi_volume_in
- 	dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
- 		 dev->ubi_num, dev->vol_id, vi->name);
- 	mutex_unlock(&devices_mutex);
-+
-+	if (!strcmp(vi->name, "rootfs") &&
-+	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    ROOT_DEV == 0) {
-+		pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
-+			  dev->ubi_num, dev->vol_id, vi->name);
-+		ROOT_DEV = MKDEV(gd->major, gd->first_minor);
-+	}
-+
- 	return 0;
- 
- out_free_queue:
diff --git a/target/linux/generic/pending-4.9/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-4.9/494-mtd-ubi-add-EOF-marker-support.patch
deleted file mode 100644
index 0b2314955b..0000000000
--- a/target/linux/generic/pending-4.9/494-mtd-ubi-add-EOF-marker-support.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add EOF marker support to the UBI layer
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++---
- drivers/mtd/ubi/ubi.h    |  1 +
- 2 files changed, 23 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -939,6 +939,13 @@ static bool vol_ignored(int vol_id)
- #endif
- }
- 
-+static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
-+{
-+	return ech->padding1[0] == 'E' &&
-+	       ech->padding1[1] == 'O' &&
-+	       ech->padding1[2] == 'F';
-+}
-+
- /**
-  * scan_peb - scan and process UBI headers of a PEB.
-  * @ubi: UBI device description object
-@@ -971,9 +978,21 @@ static int scan_peb(struct ubi_device *u
- 		return 0;
- 	}
- 
--	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
--	if (err < 0)
--		return err;
-+	if (!ai->eof_found) {
-+		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-+		if (err < 0)
-+			return err;
-+
-+		if (ec_hdr_has_eof(ech)) {
-+			pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n",
-+				pnum);
-+			ai->eof_found = true;
-+		}
-+	}
-+
-+	if (ai->eof_found)
-+		err = UBI_IO_FF_BITFLIPS;
-+
- 	switch (err) {
- 	case 0:
- 		break;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -779,6 +779,7 @@ struct ubi_attach_info {
- 	int mean_ec;
- 	uint64_t ec_sum;
- 	int ec_count;
-+	bool eof_found;
- 	struct kmem_cache *aeb_slab_cache;
- 	struct ubi_ec_hdr *ech;
- 	struct ubi_vid_io_buf *vidb;
diff --git a/target/linux/generic/pending-4.9/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-4.9/530-jffs2_make_lzma_available.patch
deleted file mode 100644
index 31e7f2a259..0000000000
--- a/target/linux/generic/pending-4.9/530-jffs2_make_lzma_available.patch
+++ /dev/null
@@ -1,5180 +0,0 @@
-From: Alexandros C. Couloumbis <alex@ozo.com>
-Subject: fs: add jffs2/lzma support (not activated by default yet)
-
-lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- fs/jffs2/Kconfig             |    9 +
- fs/jffs2/Makefile            |    3 +
- fs/jffs2/compr.c             |    6 +
- fs/jffs2/compr.h             |   10 +-
- fs/jffs2/compr_lzma.c        |  128 +++
- fs/jffs2/super.c             |   33 +-
- include/linux/lzma.h         |   62 ++
- include/linux/lzma/LzFind.h  |  115 +++
- include/linux/lzma/LzHash.h  |   54 +
- include/linux/lzma/LzmaDec.h |  231 +++++
- include/linux/lzma/LzmaEnc.h |   80 ++
- include/linux/lzma/Types.h   |  226 +++++
- include/uapi/linux/jffs2.h   |    1 +
- lib/Kconfig                  |    6 +
- lib/Makefile                 |   12 +
- lib/lzma/LzFind.c            |  761 ++++++++++++++
- lib/lzma/LzmaDec.c           |  999 +++++++++++++++++++
- lib/lzma/LzmaEnc.c           | 2271 ++++++++++++++++++++++++++++++++++++++++++
- lib/lzma/Makefile            |    7 +
- 19 files changed, 5008 insertions(+), 6 deletions(-)
- create mode 100644 fs/jffs2/compr_lzma.c
- create mode 100644 include/linux/lzma.h
- create mode 100644 include/linux/lzma/LzFind.h
- create mode 100644 include/linux/lzma/LzHash.h
- create mode 100644 include/linux/lzma/LzmaDec.h
- create mode 100644 include/linux/lzma/LzmaEnc.h
- create mode 100644 include/linux/lzma/Types.h
- create mode 100644 lib/lzma/LzFind.c
- create mode 100644 lib/lzma/LzmaDec.c
- create mode 100644 lib/lzma/LzmaEnc.c
- create mode 100644 lib/lzma/Makefile
-
---- a/fs/jffs2/Kconfig
-+++ b/fs/jffs2/Kconfig
-@@ -139,6 +139,15 @@ config JFFS2_LZO
- 	  This feature was added in July, 2007. Say 'N' if you need
- 	  compatibility with older bootloaders or kernels.
- 
-+config JFFS2_LZMA
-+	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
-+	select LZMA_COMPRESS
-+	select LZMA_DECOMPRESS
-+	depends on JFFS2_FS
-+	default n
-+	help
-+	  JFFS2 wrapper to the LZMA C SDK
-+
- config JFFS2_RTIME
- 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- 	depends on JFFS2_FS
---- a/fs/jffs2/Makefile
-+++ b/fs/jffs2/Makefile
-@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
- jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
- jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
- jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
-+jffs2-$(CONFIG_JFFS2_LZMA)      += compr_lzma.o
- jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
-+
-+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
-@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_init();
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+        jffs2_lzma_init();
-+#endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
- 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
-+#ifdef CONFIG_JFFS2_LZMA
-+        jffs2_lzma_exit();
-+#endif
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_exit();
- #endif
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
-@@ -29,9 +29,9 @@
- #define JFFS2_DYNRUBIN_PRIORITY  20
- #define JFFS2_LZARI_PRIORITY     30
- #define JFFS2_RTIME_PRIORITY     50
--#define JFFS2_ZLIB_PRIORITY      60
--#define JFFS2_LZO_PRIORITY       80
--
-+#define JFFS2_LZMA_PRIORITY      70
-+#define JFFS2_ZLIB_PRIORITY      80
-+#define JFFS2_LZO_PRIORITY       90
- 
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
- #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
-@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
- int jffs2_lzo_init(void);
- void jffs2_lzo_exit(void);
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+int jffs2_lzma_init(void);
-+void jffs2_lzma_exit(void);
-+#endif
- 
- #endif /* __JFFS2_COMPR_H__ */
---- /dev/null
-+++ b/fs/jffs2/compr_lzma.c
-@@ -0,0 +1,128 @@
-+/*
-+ * JFFS2 -- Journalling Flash File System, Version 2.
-+ *
-+ * For licensing information, see the file 'LICENCE' in this directory.
-+ *
-+ * JFFS2 wrapper to the LZMA C SDK
-+ *
-+ */
-+
-+#include <linux/lzma.h>
-+#include "compr.h"
-+
-+#ifdef __KERNEL__
-+	static DEFINE_MUTEX(deflate_mutex);
-+#endif
-+
-+CLzmaEncHandle *p;
-+Byte propsEncoded[LZMA_PROPS_SIZE];
-+SizeT propsSize = sizeof(propsEncoded);
-+
-+STATIC void lzma_free_workspace(void)
-+{
-+	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
-+}
-+
-+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
-+{
-+	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
-+	{
-+		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
-+		return -ENOMEM;
-+	}
-+
-+	if (LzmaEnc_SetProps(p, props) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+	
-+	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+        return 0;
-+}
-+
-+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
-+			      uint32_t *sourcelen, uint32_t *dstlen)
-+{
-+	SizeT compress_size = (SizeT)(*dstlen);
-+	int ret;
-+
-+	#ifdef __KERNEL__
-+		mutex_lock(&deflate_mutex);
-+	#endif
-+
-+	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
-+		0, NULL, &lzma_alloc, &lzma_alloc);
-+
-+	#ifdef __KERNEL__
-+		mutex_unlock(&deflate_mutex);
-+	#endif
-+
-+	if (ret != SZ_OK)
-+		return -1;
-+
-+	*dstlen = (uint32_t)compress_size;
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+				 uint32_t srclen, uint32_t destlen)
-+{
-+	int ret;
-+	SizeT dl = (SizeT)destlen;
-+	SizeT sl = (SizeT)srclen;
-+	ELzmaStatus status;
-+	
-+	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
-+		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
-+
-+	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static struct jffs2_compressor jffs2_lzma_comp = {
-+	.priority = JFFS2_LZMA_PRIORITY,
-+	.name = "lzma",
-+	.compr = JFFS2_COMPR_LZMA,
-+	.compress = &jffs2_lzma_compress,
-+	.decompress = &jffs2_lzma_decompress,
-+	.disabled = 0,
-+};
-+
-+int INIT jffs2_lzma_init(void)
-+{
-+        int ret;
-+	CLzmaEncProps props;
-+	LzmaEncProps_Init(&props);
-+
-+        props.dictSize = LZMA_BEST_DICT(0x2000);
-+        props.level = LZMA_BEST_LEVEL;
-+        props.lc = LZMA_BEST_LC;
-+        props.lp = LZMA_BEST_LP;
-+        props.pb = LZMA_BEST_PB;
-+        props.fb = LZMA_BEST_FB;
-+
-+	ret = lzma_alloc_workspace(&props);
-+        if (ret < 0)
-+                return ret;
-+
-+	ret = jffs2_register_compressor(&jffs2_lzma_comp);
-+	if (ret)
-+		lzma_free_workspace();
-+	
-+        return ret;
-+}
-+
-+void jffs2_lzma_exit(void)
-+{
-+	jffs2_unregister_compressor(&jffs2_lzma_comp);
-+	lzma_free_workspace();
-+}
---- a/fs/jffs2/super.c
-+++ b/fs/jffs2/super.c
-@@ -374,14 +374,41 @@ static int __init init_jffs2_fs(void)
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
- 
--	pr_info("version 2.2."
-+	pr_info("version 2.2"
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- 	       " (NAND)"
- #endif
- #ifdef CONFIG_JFFS2_SUMMARY
--	       " (SUMMARY) "
-+	       " (SUMMARY)"
- #endif
--	       " © 2001-2006 Red Hat, Inc.\n");
-+#ifdef CONFIG_JFFS2_ZLIB
-+	       " (ZLIB)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZO
-+	       " (LZO)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	       " (LZMA)"
-+#endif
-+#ifdef CONFIG_JFFS2_RTIME
-+	       " (RTIME)"
-+#endif
-+#ifdef CONFIG_JFFS2_RUBIN
-+	       " (RUBIN)"
-+#endif
-+#ifdef  CONFIG_JFFS2_CMODE_NONE
-+	       " (CMODE_NONE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_PRIORITY
-+	       " (CMODE_PRIORITY)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_SIZE
-+	       " (CMODE_SIZE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
-+	       " (CMODE_FAVOURLZO)"
-+#endif
-+	       " (c) 2001-2006 Red Hat, Inc.\n");
- 
- 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
- 					     sizeof(struct jffs2_inode_info),
---- /dev/null
-+++ b/include/linux/lzma.h
-@@ -0,0 +1,62 @@
-+#ifndef __LZMA_H__
-+#define __LZMA_H__
-+
-+#ifdef __KERNEL__
-+	#include <linux/kernel.h>
-+	#include <linux/sched.h>
-+	#include <linux/slab.h>
-+	#include <linux/vmalloc.h>
-+	#include <linux/init.h>
-+	#define LZMA_MALLOC vmalloc
-+	#define LZMA_FREE vfree
-+	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
-+	#define INIT __init
-+	#define STATIC static
-+#else
-+	#include <stdint.h>
-+	#include <stdlib.h>
-+	#include <stdio.h>
-+	#include <unistd.h>
-+	#include <string.h>
-+	#include <asm/types.h>
-+	#include <errno.h>
-+	#include <linux/jffs2.h>
-+	#ifndef PAGE_SIZE
-+		extern int page_size;
-+		#define PAGE_SIZE page_size
-+	#endif
-+	#define LZMA_MALLOC malloc
-+	#define LZMA_FREE free
-+	#define PRINT_ERROR(msg) fprintf(stderr, msg)
-+	#define INIT
-+	#define STATIC
-+#endif
-+
-+#include "lzma/LzmaDec.h"
-+#include "lzma/LzmaEnc.h"
-+
-+#define LZMA_BEST_LEVEL (9)
-+#define LZMA_BEST_LC    (0)
-+#define LZMA_BEST_LP    (0)
-+#define LZMA_BEST_PB    (0)
-+#define LZMA_BEST_FB  (273)
-+
-+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
-+
-+static void *p_lzma_malloc(void *p, size_t size)
-+{
-+        if (size == 0)
-+                return NULL;
-+
-+        return LZMA_MALLOC(size);
-+}
-+
-+static void p_lzma_free(void *p, void *address)
-+{
-+        if (address != NULL)
-+                LZMA_FREE(address);
-+}
-+
-+static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzFind.h
-@@ -0,0 +1,115 @@
-+/* LzFind.h -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_FIND_H
-+#define __LZ_FIND_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+typedef UInt32 CLzRef;
-+
-+typedef struct _CMatchFinder
-+{
-+  Byte *buffer;
-+  UInt32 pos;
-+  UInt32 posLimit;
-+  UInt32 streamPos;
-+  UInt32 lenLimit;
-+
-+  UInt32 cyclicBufferPos;
-+  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
-+
-+  UInt32 matchMaxLen;
-+  CLzRef *hash;
-+  CLzRef *son;
-+  UInt32 hashMask;
-+  UInt32 cutValue;
-+
-+  Byte *bufferBase;
-+  ISeqInStream *stream;
-+  int streamEndWasReached;
-+
-+  UInt32 blockSize;
-+  UInt32 keepSizeBefore;
-+  UInt32 keepSizeAfter;
-+
-+  UInt32 numHashBytes;
-+  int directInput;
-+  size_t directInputRem;
-+  int btMode;
-+  int bigHash;
-+  UInt32 historySize;
-+  UInt32 fixedHashSize;
-+  UInt32 hashSizeSum;
-+  UInt32 numSons;
-+  SRes result;
-+  UInt32 crc[256];
-+} CMatchFinder;
-+
-+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
-+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
-+
-+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-+
-+int MatchFinder_NeedMove(CMatchFinder *p);
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
-+void MatchFinder_MoveBlock(CMatchFinder *p);
-+void MatchFinder_ReadIfRequired(CMatchFinder *p);
-+
-+void MatchFinder_Construct(CMatchFinder *p);
-+
-+/* Conditions:
-+     historySize <= 3 GB
-+     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
-+*/
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc);
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-+    UInt32 *distances, UInt32 maxLen);
-+
-+/*
-+Conditions:
-+  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
-+  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
-+*/
-+
-+typedef void (*Mf_Init_Func)(void *object);
-+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
-+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
-+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
-+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
-+typedef void (*Mf_Skip_Func)(void *object, UInt32);
-+
-+typedef struct _IMatchFinder
-+{
-+  Mf_Init_Func Init;
-+  Mf_GetIndexByte_Func GetIndexByte;
-+  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
-+  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
-+  Mf_GetMatches_Func GetMatches;
-+  Mf_Skip_Func Skip;
-+} IMatchFinder;
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-+
-+void MatchFinder_Init(CMatchFinder *p);
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzHash.h
-@@ -0,0 +1,54 @@
-+/* LzHash.h -- HASH functions for LZ algorithms
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_HASH_H
-+#define __LZ_HASH_H
-+
-+#define kHash2Size (1 << 10)
-+#define kHash3Size (1 << 16)
-+#define kHash4Size (1 << 20)
-+
-+#define kFix3HashSize (kHash2Size)
-+#define kFix4HashSize (kHash2Size + kHash3Size)
-+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
-+
-+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
-+
-+#define HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
-+
-+#define HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
-+
-+#define HASH5_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
-+  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
-+  hash4Value &= (kHash4Size - 1); }
-+
-+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
-+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
-+
-+
-+#define MT_HASH2_CALC \
-+  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
-+
-+#define MT_HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
-+
-+#define MT_HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -0,0 +1,231 @@
-+/* LzmaDec.h -- LZMA Decoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_DEC_H
-+#define __LZMA_DEC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* #define _LZMA_PROB32 */
-+/* _LZMA_PROB32 can increase the speed on some CPUs,
-+   but memory usage for CLzmaDec::probs will be doubled in that case */
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+
-+/* ---------- LZMA Properties ---------- */
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaProps
-+{
-+  unsigned lc, lp, pb;
-+  UInt32 dicSize;
-+} CLzmaProps;
-+
-+/* LzmaProps_Decode - decodes properties
-+Returns:
-+  SZ_OK
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-+
-+
-+/* ---------- LZMA Decoder state ---------- */
-+
-+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-+   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-+
-+#define LZMA_REQUIRED_INPUT_MAX 20
-+
-+typedef struct
-+{
-+  CLzmaProps prop;
-+  CLzmaProb *probs;
-+  Byte *dic;
-+  const Byte *buf;
-+  UInt32 range, code;
-+  SizeT dicPos;
-+  SizeT dicBufSize;
-+  UInt32 processedPos;
-+  UInt32 checkDicSize;
-+  unsigned state;
-+  UInt32 reps[4];
-+  unsigned remainLen;
-+  int needFlush;
-+  int needInitState;
-+  UInt32 numProbs;
-+  unsigned tempBufSize;
-+  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-+} CLzmaDec;
-+
-+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-+
-+void LzmaDec_Init(CLzmaDec *p);
-+
-+/* There are two types of LZMA streams:
-+     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-+     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-+
-+typedef enum
-+{
-+  LZMA_FINISH_ANY,   /* finish at any point */
-+  LZMA_FINISH_END    /* block must be finished at the end */
-+} ELzmaFinishMode;
-+
-+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-+
-+   You must use LZMA_FINISH_END, when you know that current output buffer
-+   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-+
-+   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-+   and output value of destLen will be less than output buffer size limit.
-+   You can check status result also.
-+
-+   You can use multiple checks to test data integrity after full decompression:
-+     1) Check Result and "status" variable.
-+     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-+     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-+        You must use correct finish mode in that case. */
-+
-+typedef enum
-+{
-+  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
-+  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
-+  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
-+  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
-+  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
-+} ELzmaStatus;
-+
-+/* ELzmaStatus is used only as output value for function call */
-+
-+
-+/* ---------- Interfaces ---------- */
-+
-+/* There are 3 levels of interfaces:
-+     1) Dictionary Interface
-+     2) Buffer Interface
-+     3) One Call Interface
-+   You can select any of these interfaces, but don't mix functions from different
-+   groups for same object. */
-+
-+
-+/* There are two variants to allocate state for Dictionary Interface:
-+     1) LzmaDec_Allocate / LzmaDec_Free
-+     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-+   You can use variant 2, if you set dictionary buffer manually.
-+   For Buffer Interface you must always use variant 1.
-+
-+LzmaDec_Allocate* can return:
-+  SZ_OK
-+  SZ_ERROR_MEM         - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+   
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
-+
-+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-+
-+/* ---------- Dictionary Interface ---------- */
-+
-+/* You can use it, if you want to eliminate the overhead for data copying from
-+   dictionary to some other external buffer.
-+   You must work with CLzmaDec variables directly in this interface.
-+
-+   STEPS:
-+     LzmaDec_Constr()
-+     LzmaDec_Allocate()
-+     for (each new stream)
-+     {
-+       LzmaDec_Init()
-+       while (it needs more decompression)
-+       {
-+         LzmaDec_DecodeToDic()
-+         use data from CLzmaDec::dic and update CLzmaDec::dicPos
-+       }
-+     }
-+     LzmaDec_Free()
-+*/
-+
-+/* LzmaDec_DecodeToDic
-+   
-+   The decoding to internal dictionary buffer (CLzmaDec::dic).
-+   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (dicLimit).
-+  LZMA_FINISH_ANY - Decode just dicLimit bytes.
-+  LZMA_FINISH_END - Stream must be finished after dicLimit.
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_NEEDS_MORE_INPUT
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+*/
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- Buffer Interface ---------- */
-+
-+/* It's zlib-like interface.
-+   See LzmaDec_DecodeToDic description for information about STEPS and return results,
-+   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-+   to work with CLzmaDec variables manually.
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+*/
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaDecode
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+  SZ_ERROR_MEM  - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-+*/
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -0,0 +1,80 @@
-+/*  LzmaEnc.h -- LZMA Encoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_ENC_H
-+#define __LZMA_ENC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaEncProps
-+{
-+  int level;       /*  0 <= level <= 9 */
-+  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
-+                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
-+                       default = (1 << 24) */
-+  int lc;          /* 0 <= lc <= 8, default = 3 */
-+  int lp;          /* 0 <= lp <= 4, default = 0 */
-+  int pb;          /* 0 <= pb <= 4, default = 2 */
-+  int algo;        /* 0 - fast, 1 - normal, default = 1 */
-+  int fb;          /* 5 <= fb <= 273, default = 32 */
-+  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
-+  int numHashBytes; /* 2, 3 or 4, default = 4 */
-+  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
-+  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
-+  int numThreads;  /* 1 or 2, default = 2 */
-+} CLzmaEncProps;
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p);
-+void LzmaEncProps_Normalize(CLzmaEncProps *p);
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
-+
-+
-+/* ---------- CLzmaEncHandle Interface ---------- */
-+
-+/* LzmaEnc_* functions can return the following exit codes:
-+Returns:
-+  SZ_OK           - OK
-+  SZ_ERROR_MEM    - Memory allocation error
-+  SZ_ERROR_PARAM  - Incorrect paramater in props
-+  SZ_ERROR_WRITE  - Write callback error.
-+  SZ_ERROR_PROGRESS - some break from progress callback
-+  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+typedef void * CLzmaEncHandle;
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaEncode
-+Return code:
-+  SZ_OK               - OK
-+  SZ_ERROR_MEM        - Memory allocation error
-+  SZ_ERROR_PARAM      - Incorrect paramater
-+  SZ_ERROR_OUTPUT_EOF - output buffer overflow
-+  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
-+*/
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/Types.h
-@@ -0,0 +1,226 @@
-+/* Types.h -- Basic types
-+2009-11-23 : Igor Pavlov : Public domain */
-+
-+#ifndef __7Z_TYPES_H
-+#define __7Z_TYPES_H
-+
-+#include <stddef.h>
-+
-+#ifdef _WIN32
-+#include <windows.h>
-+#endif
-+
-+#ifndef EXTERN_C_BEGIN
-+#ifdef __cplusplus
-+#define EXTERN_C_BEGIN extern "C" {
-+#define EXTERN_C_END }
-+#else
-+#define EXTERN_C_BEGIN
-+#define EXTERN_C_END
-+#endif
-+#endif
-+
-+EXTERN_C_BEGIN
-+
-+#define SZ_OK 0
-+
-+#define SZ_ERROR_DATA 1
-+#define SZ_ERROR_MEM 2
-+#define SZ_ERROR_CRC 3
-+#define SZ_ERROR_UNSUPPORTED 4
-+#define SZ_ERROR_PARAM 5
-+#define SZ_ERROR_INPUT_EOF 6
-+#define SZ_ERROR_OUTPUT_EOF 7
-+#define SZ_ERROR_READ 8
-+#define SZ_ERROR_WRITE 9
-+#define SZ_ERROR_PROGRESS 10
-+#define SZ_ERROR_FAIL 11
-+#define SZ_ERROR_THREAD 12
-+
-+#define SZ_ERROR_ARCHIVE 16
-+#define SZ_ERROR_NO_ARCHIVE 17
-+
-+typedef int SRes;
-+
-+#ifdef _WIN32
-+typedef DWORD WRes;
-+#else
-+typedef int WRes;
-+#endif
-+
-+#ifndef RINOK
-+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
-+#endif
-+
-+typedef unsigned char Byte;
-+typedef short Int16;
-+typedef unsigned short UInt16;
-+
-+#ifdef _LZMA_UINT32_IS_ULONG
-+typedef long Int32;
-+typedef unsigned long UInt32;
-+#else
-+typedef int Int32;
-+typedef unsigned int UInt32;
-+#endif
-+
-+#ifdef _SZ_NO_INT_64
-+
-+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
-+   NOTES: Some code will work incorrectly in that case! */
-+
-+typedef long Int64;
-+typedef unsigned long UInt64;
-+
-+#else
-+
-+#if defined(_MSC_VER) || defined(__BORLANDC__)
-+typedef __int64 Int64;
-+typedef unsigned __int64 UInt64;
-+#else
-+typedef long long int Int64;
-+typedef unsigned long long int UInt64;
-+#endif
-+
-+#endif
-+
-+#ifdef _LZMA_NO_SYSTEM_SIZE_T
-+typedef UInt32 SizeT;
-+#else
-+typedef size_t SizeT;
-+#endif
-+
-+typedef int Bool;
-+#define True 1
-+#define False 0
-+
-+
-+#ifdef _WIN32
-+#define MY_STD_CALL __stdcall
-+#else
-+#define MY_STD_CALL
-+#endif
-+
-+#ifdef _MSC_VER
-+
-+#if _MSC_VER >= 1300
-+#define MY_NO_INLINE __declspec(noinline)
-+#else
-+#define MY_NO_INLINE
-+#endif
-+
-+#define MY_CDECL __cdecl
-+#define MY_FAST_CALL __fastcall
-+
-+#else
-+
-+#define MY_CDECL
-+#define MY_FAST_CALL
-+
-+#endif
-+
-+
-+/* The following interfaces use first parameter as pointer to structure */
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) < input(*size)) is allowed */
-+} ISeqInStream;
-+
-+/* it can return SZ_ERROR_INPUT_EOF */
-+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
-+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
-+
-+typedef struct
-+{
-+  size_t (*Write)(void *p, const void *buf, size_t size);
-+    /* Returns: result - the number of actually written bytes.
-+       (result < size) means error */
-+} ISeqOutStream;
-+
-+typedef enum
-+{
-+  SZ_SEEK_SET = 0,
-+  SZ_SEEK_CUR = 1,
-+  SZ_SEEK_END = 2
-+} ESzSeek;
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ISeekInStream;
-+
-+typedef struct
-+{
-+  SRes (*Look)(void *p, void **buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) > input(*size)) is not allowed
-+       (output(*size) < input(*size)) is allowed */
-+  SRes (*Skip)(void *p, size_t offset);
-+    /* offset must be <= output(*size) of Look */
-+
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* reads directly (without buffer). It's same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ILookInStream;
-+
-+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
-+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
-+
-+/* reads via ILookInStream::Read */
-+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
-+
-+#define LookToRead_BUF_SIZE (1 << 14)
-+
-+typedef struct
-+{
-+  ILookInStream s;
-+  ISeekInStream *realStream;
-+  size_t pos;
-+  size_t size;
-+  Byte buf[LookToRead_BUF_SIZE];
-+} CLookToRead;
-+
-+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
-+void LookToRead_Init(CLookToRead *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToLook;
-+
-+void SecToLook_CreateVTable(CSecToLook *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToRead;
-+
-+void SecToRead_CreateVTable(CSecToRead *p);
-+
-+typedef struct
-+{
-+  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
-+    /* Returns: result. (result != SZ_OK) means break.
-+       Value (UInt64)(Int64)-1 for size means unknown value. */
-+} ICompressProgress;
-+
-+typedef struct
-+{
-+  void *(*Alloc)(void *p, size_t size);
-+  void (*Free)(void *p, void *address); /* address can be 0 */
-+} ISzAlloc;
-+
-+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
-+#define IAlloc_Free(p, a) (p)->Free((p), a)
-+
-+EXTERN_C_END
-+
-+#endif
---- a/include/uapi/linux/jffs2.h
-+++ b/include/uapi/linux/jffs2.h
-@@ -46,6 +46,7 @@
- #define JFFS2_COMPR_DYNRUBIN	0x05
- #define JFFS2_COMPR_ZLIB	0x06
- #define JFFS2_COMPR_LZO		0x07
-+#define JFFS2_COMPR_LZMA	0x08
- /* Compatibility flags. */
- #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
- #define JFFS2_NODE_ACCURATE 0x2000
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -241,6 +241,12 @@ config LZ4_DECOMPRESS
- 
- source "lib/xz/Kconfig"
- 
-+config LZMA_COMPRESS
-+    tristate
-+
-+config LZMA_DECOMPRESS
-+    tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -2,6 +2,16 @@
- # Makefile for some libs needed in the kernel.
- #
- 
-+ifdef CONFIG_JFFS2_ZLIB
-+	CONFIG_ZLIB_INFLATE:=y
-+	CONFIG_ZLIB_DEFLATE:=y
-+endif
-+
-+ifdef CONFIG_JFFS2_LZMA
-+	CONFIG_LZMA_DECOMPRESS:=y
-+	CONFIG_LZMA_COMPRESS:=y
-+endif
-+
- ifdef CONFIG_FUNCTION_TRACER
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
-@@ -109,6 +119,8 @@ obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/
- obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/
- obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma/
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
- 
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/lib/lzma/LzFind.c
-@@ -0,0 +1,761 @@
-+/* LzFind.c -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+#include "LzFind.h"
-+#include "LzHash.h"
-+
-+#define kEmptyHashValue 0
-+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
-+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
-+#define kNormalizeMask (~(kNormalizeStepMin - 1))
-+#define kMaxHistorySize ((UInt32)3 << 30)
-+
-+#define kStartMaxLen 3
-+
-+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  if (!p->directInput)
-+  {
-+    alloc->Free(alloc, p->bufferBase);
-+    p->bufferBase = 0;
-+  }
-+}
-+
-+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
-+
-+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
-+{
-+  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-+  if (p->directInput)
-+  {
-+    p->blockSize = blockSize;
-+    return 1;
-+  }
-+  if (p->bufferBase == 0 || p->blockSize != blockSize)
-+  {
-+    LzInWindow_Free(p, alloc);
-+    p->blockSize = blockSize;
-+    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
-+  }
-+  return (p->bufferBase != 0);
-+}
-+
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+
-+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+{
-+  p->posLimit -= subValue;
-+  p->pos -= subValue;
-+  p->streamPos -= subValue;
-+}
-+
-+static void MatchFinder_ReadBlock(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached || p->result != SZ_OK)
-+    return;
-+  if (p->directInput)
-+  {
-+    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-+    if (curSize > p->directInputRem)
-+      curSize = (UInt32)p->directInputRem;
-+    p->directInputRem -= curSize;
-+    p->streamPos += curSize;
-+    if (p->directInputRem == 0)
-+      p->streamEndWasReached = 1;
-+    return;
-+  }
-+  for (;;)
-+  {
-+    Byte *dest = p->buffer + (p->streamPos - p->pos);
-+    size_t size = (p->bufferBase + p->blockSize - dest);
-+    if (size == 0)
-+      return;
-+    p->result = p->stream->Read(p->stream, dest, &size);
-+    if (p->result != SZ_OK)
-+      return;
-+    if (size == 0)
-+    {
-+      p->streamEndWasReached = 1;
-+      return;
-+    }
-+    p->streamPos += (UInt32)size;
-+    if (p->streamPos - p->pos > p->keepSizeAfter)
-+      return;
-+  }
-+}
-+
-+void MatchFinder_MoveBlock(CMatchFinder *p)
-+{
-+  memmove(p->bufferBase,
-+    p->buffer - p->keepSizeBefore,
-+    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
-+  p->buffer = p->bufferBase + p->keepSizeBefore;
-+}
-+
-+int MatchFinder_NeedMove(CMatchFinder *p)
-+{
-+  if (p->directInput)
-+    return 0;
-+  /* if (p->streamEndWasReached) return 0; */
-+  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
-+}
-+
-+void MatchFinder_ReadIfRequired(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached)
-+    return;
-+  if (p->keepSizeAfter >= p->streamPos - p->pos)
-+    MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
-+{
-+  if (MatchFinder_NeedMove(p))
-+    MatchFinder_MoveBlock(p);
-+  MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
-+{
-+  p->cutValue = 32;
-+  p->btMode = 1;
-+  p->numHashBytes = 4;
-+  p->bigHash = 0;
-+}
-+
-+#define kCrcPoly 0xEDB88320
-+
-+void MatchFinder_Construct(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  p->bufferBase = 0;
-+  p->directInput = 0;
-+  p->hash = 0;
-+  MatchFinder_SetDefaultSettings(p);
-+
-+  for (i = 0; i < 256; i++)
-+  {
-+    UInt32 r = i;
-+    int j;
-+    for (j = 0; j < 8; j++)
-+      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
-+    p->crc[i] = r;
-+  }
-+}
-+
-+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->hash);
-+  p->hash = 0;
-+}
-+
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  MatchFinder_FreeThisClassMemory(p, alloc);
-+  LzInWindow_Free(p, alloc);
-+}
-+
-+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
-+{
-+  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
-+  if (sizeInBytes / sizeof(CLzRef) != num)
-+    return 0;
-+  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
-+}
-+
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc)
-+{
-+  UInt32 sizeReserv;
-+  if (historySize > kMaxHistorySize)
-+  {
-+    MatchFinder_Free(p, alloc);
-+    return 0;
-+  }
-+  sizeReserv = historySize >> 1;
-+  if (historySize > ((UInt32)2 << 30))
-+    sizeReserv = historySize >> 2;
-+  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
-+
-+  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
-+  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
-+  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
-+  if (LzInWindow_Create(p, sizeReserv, alloc))
-+  {
-+    UInt32 newCyclicBufferSize = historySize + 1;
-+    UInt32 hs;
-+    p->matchMaxLen = matchMaxLen;
-+    {
-+      p->fixedHashSize = 0;
-+      if (p->numHashBytes == 2)
-+        hs = (1 << 16) - 1;
-+      else
-+      {
-+        hs = historySize - 1;
-+        hs |= (hs >> 1);
-+        hs |= (hs >> 2);
-+        hs |= (hs >> 4);
-+        hs |= (hs >> 8);
-+        hs >>= 1;
-+        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
-+        if (hs > (1 << 24))
-+        {
-+          if (p->numHashBytes == 3)
-+            hs = (1 << 24) - 1;
-+          else
-+            hs >>= 1;
-+        }
-+      }
-+      p->hashMask = hs;
-+      hs++;
-+      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
-+      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
-+      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
-+      hs += p->fixedHashSize;
-+    }
-+
-+    {
-+      UInt32 prevSize = p->hashSizeSum + p->numSons;
-+      UInt32 newSize;
-+      p->historySize = historySize;
-+      p->hashSizeSum = hs;
-+      p->cyclicBufferSize = newCyclicBufferSize;
-+      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
-+      newSize = p->hashSizeSum + p->numSons;
-+      if (p->hash != 0 && prevSize == newSize)
-+        return 1;
-+      MatchFinder_FreeThisClassMemory(p, alloc);
-+      p->hash = AllocRefs(newSize, alloc);
-+      if (p->hash != 0)
-+      {
-+        p->son = p->hash + p->hashSizeSum;
-+        return 1;
-+      }
-+    }
-+  }
-+  MatchFinder_Free(p, alloc);
-+  return 0;
-+}
-+
-+static void MatchFinder_SetLimits(CMatchFinder *p)
-+{
-+  UInt32 limit = kMaxValForNormalize - p->pos;
-+  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  limit2 = p->streamPos - p->pos;
-+  if (limit2 <= p->keepSizeAfter)
-+  {
-+    if (limit2 > 0)
-+      limit2 = 1;
-+  }
-+  else
-+    limit2 -= p->keepSizeAfter;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  {
-+    UInt32 lenLimit = p->streamPos - p->pos;
-+    if (lenLimit > p->matchMaxLen)
-+      lenLimit = p->matchMaxLen;
-+    p->lenLimit = lenLimit;
-+  }
-+  p->posLimit = p->pos + limit;
-+}
-+
-+void MatchFinder_Init(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < p->hashSizeSum; i++)
-+    p->hash[i] = kEmptyHashValue;
-+  p->cyclicBufferPos = 0;
-+  p->buffer = p->bufferBase;
-+  p->pos = p->streamPos = p->cyclicBufferSize;
-+  p->result = SZ_OK;
-+  p->streamEndWasReached = 0;
-+  MatchFinder_ReadBlock(p);
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
-+{
-+  return (p->pos - p->historySize - 1) & kNormalizeMask;
-+}
-+
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+{
-+  UInt32 i;
-+  for (i = 0; i < numItems; i++)
-+  {
-+    UInt32 value = items[i];
-+    if (value <= subValue)
-+      value = kEmptyHashValue;
-+    else
-+      value -= subValue;
-+    items[i] = value;
-+  }
-+}
-+
-+static void MatchFinder_Normalize(CMatchFinder *p)
-+{
-+  UInt32 subValue = MatchFinder_GetSubValue(p);
-+  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
-+  MatchFinder_ReduceOffsets(p, subValue);
-+}
-+
-+static void MatchFinder_CheckLimits(CMatchFinder *p)
-+{
-+  if (p->pos == kMaxValForNormalize)
-+    MatchFinder_Normalize(p);
-+  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
-+    MatchFinder_CheckAndMoveAndRead(p);
-+  if (p->cyclicBufferPos == p->cyclicBufferSize)
-+    p->cyclicBufferPos = 0;
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  son[_cyclicBufferPos] = curMatch;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+      return distances;
-+    {
-+      const Byte *pb = cur - delta;
-+      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-+      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-+      {
-+        UInt32 len = 0;
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+            return distances;
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return distances;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        if (++len != lenLimit && pb[len] == cur[len])
-+          while (++len != lenLimit)
-+            if (pb[len] != cur[len])
-+              break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return distances;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        {
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+#define MOVE_POS \
-+  ++p->cyclicBufferPos; \
-+  p->buffer++; \
-+  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-+
-+#define MOVE_POS_RET MOVE_POS return offset;
-+
-+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-+
-+#define GET_MATCHES_HEADER2(minLen, ret_op) \
-+  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-+  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-+  cur = p->buffer;
-+
-+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
-+#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
-+
-+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
-+
-+#define GET_MATCHES_FOOTER(offset, maxLen) \
-+  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
-+  distances + offset, maxLen) - distances); MOVE_POS_RET;
-+
-+#define SKIP_FOOTER \
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
-+
-+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(2)
-+  HASH2_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 1)
-+}
-+
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 2)
-+}
-+
-+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, delta2, maxLen, offset;
-+  GET_MATCHES_HEADER(3)
-+
-+  HASH3_CALC;
-+
-+  delta2 = p->pos - p->hash[hash2Value];
-+  curMatch = p->hash[kFix3HashSize + hashValue];
-+  
-+  p->hash[hash2Value] =
-+  p->hash[kFix3HashSize + hashValue] = p->pos;
-+
-+
-+  maxLen = 2;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[0] = maxLen;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+  
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      p->son[p->cyclicBufferPos] = curMatch;
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances + offset, maxLen) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances, 2) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(2)
-+    HASH2_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value;
-+    SKIP_HEADER(3)
-+    HASH3_CALC;
-+    curMatch = p->hash[kFix3HashSize + hashValue];
-+    p->hash[hash2Value] =
-+    p->hash[kFix3HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] = p->pos;
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] =
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
-+{
-+  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-+  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-+  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-+  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-+  if (!p->btMode)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 2)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 3)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-+  }
-+  else
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-+  }
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaDec.c
-@@ -0,0 +1,999 @@
-+/* LzmaDec.c -- LZMA Decoder
-+2009-09-20 : Igor Pavlov : Public domain */
-+
-+#include "LzmaDec.h"
-+
-+#include <string.h>
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_INIT_SIZE 5
-+
-+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
-+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
-+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
-+  { UPDATE_0(p); i = (i + i); A0; } else \
-+  { UPDATE_1(p); i = (i + i) + 1; A1; }
-+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
-+
-+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
-+#define TREE_DECODE(probs, limit, i) \
-+  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
-+
-+/* #define _LZMA_SIZE_OPT */
-+
-+#ifdef _LZMA_SIZE_OPT
-+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
-+#else
-+#define TREE_6_DECODE(probs, i) \
-+  { i = 1; \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  i -= 0x40; }
-+#endif
-+
-+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0_CHECK range = bound;
-+#define UPDATE_1_CHECK range -= bound; code -= bound;
-+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
-+  { UPDATE_0_CHECK; i = (i + i); A0; } else \
-+  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
-+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
-+#define TREE_DECODE_CHECK(probs, limit, i) \
-+  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#define LZMA_DIC_MIN (1 << 12)
-+
-+/* First LZMA-symbol is always decoded.
-+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
-+Out:
-+  Result:
-+    SZ_OK - OK
-+    SZ_ERROR_DATA - Error
-+  p->remainLen:
-+    < kMatchSpecLenStart : normal remain
-+    = kMatchSpecLenStart : finished
-+    = kMatchSpecLenStart + 1 : Flush marker
-+    = kMatchSpecLenStart + 2 : State Init Marker
-+*/
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  CLzmaProb *probs = p->probs;
-+
-+  unsigned state = p->state;
-+  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
-+  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
-+  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
-+  unsigned lc = p->prop.lc;
-+
-+  Byte *dic = p->dic;
-+  SizeT dicBufSize = p->dicBufSize;
-+  SizeT dicPos = p->dicPos;
-+  
-+  UInt32 processedPos = p->processedPos;
-+  UInt32 checkDicSize = p->checkDicSize;
-+  unsigned len = 0;
-+
-+  const Byte *buf = p->buf;
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+
-+  do
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = processedPos & pbMask;
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0(prob)
-+    {
-+      unsigned symbol;
-+      UPDATE_0(prob);
-+      prob = probs + Literal;
-+      if (checkDicSize != 0 || processedPos != 0)
-+        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
-+        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        state -= (state < 4) ? state : 3;
-+        symbol = 1;
-+        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        state -= (state < 10) ? 3 : 6;
-+        symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      dic[dicPos++] = (Byte)symbol;
-+      processedPos++;
-+      continue;
-+    }
-+    else
-+    {
-+      UPDATE_1(prob);
-+      prob = probs + IsRep + state;
-+      IF_BIT_0(prob)
-+      {
-+        UPDATE_0(prob);
-+        state += kNumStates;
-+        prob = probs + LenCoder;
-+      }
-+      else
-+      {
-+        UPDATE_1(prob);
-+        if (checkDicSize == 0 && processedPos == 0)
-+          return SZ_ERROR_DATA;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0(prob)
-+        {
-+          UPDATE_0(prob);
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+            dicPos++;
-+            processedPos++;
-+            state = state < kNumLitStates ? 9 : 11;
-+            continue;
-+          }
-+          UPDATE_1(prob);
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          UPDATE_1(prob);
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            distance = rep1;
-+          }
-+          else
-+          {
-+            UPDATE_1(prob);
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0(prob)
-+            {
-+              UPDATE_0(prob);
-+              distance = rep2;
-+            }
-+            else
-+            {
-+              UPDATE_1(prob);
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        state = state < kNumLitStates ? 8 : 11;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0(probLen)
-+        {
-+          UPDATE_0(probLen);
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = (1 << kLenNumLowBits);
-+        }
-+        else
-+        {
-+          UPDATE_1(probLen);
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0(probLen)
-+          {
-+            UPDATE_0(probLen);
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = (1 << kLenNumMidBits);
-+          }
-+          else
-+          {
-+            UPDATE_1(probLen);
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = (1 << kLenNumHighBits);
-+          }
-+        }
-+        TREE_DECODE(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state >= kNumStates)
-+      {
-+        UInt32 distance;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
-+        TREE_6_DECODE(prob, distance);
-+        if (distance >= kStartPosModelIndex)
-+        {
-+          unsigned posSlot = (unsigned)distance;
-+          int numDirectBits = (int)(((distance >> 1) - 1));
-+          distance = (2 | (distance & 1));
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            distance <<= numDirectBits;
-+            prob = probs + SpecPos + distance - posSlot - 1;
-+            {
-+              UInt32 mask = 1;
-+              unsigned i = 1;
-+              do
-+              {
-+                GET_BIT2(prob + i, i, ; , distance |= mask);
-+                mask <<= 1;
-+              }
-+              while (--numDirectBits != 0);
-+            }
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE
-+              range >>= 1;
-+              
-+              {
-+                UInt32 t;
-+                code -= range;
-+                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
-+                distance = (distance << 1) + (t + 1);
-+                code += range & t;
-+              }
-+              /*
-+              distance <<= 1;
-+              if (code >= range)
-+              {
-+                code -= range;
-+                distance |= 1;
-+              }
-+              */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            distance <<= kNumAlignBits;
-+            {
-+              unsigned i = 1;
-+              GET_BIT2(prob + i, i, ; , distance |= 1);
-+              GET_BIT2(prob + i, i, ; , distance |= 2);
-+              GET_BIT2(prob + i, i, ; , distance |= 4);
-+              GET_BIT2(prob + i, i, ; , distance |= 8);
-+            }
-+            if (distance == (UInt32)0xFFFFFFFF)
-+            {
-+              len += kMatchSpecLenStart;
-+              state -= kNumStates;
-+              break;
-+            }
-+          }
-+        }
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        rep0 = distance + 1;
-+        if (checkDicSize == 0)
-+        {
-+          if (distance >= processedPos)
-+            return SZ_ERROR_DATA;
-+        }
-+        else if (distance >= checkDicSize)
-+          return SZ_ERROR_DATA;
-+        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-+      }
-+
-+      len += kMatchMinLen;
-+
-+      if (limit == dicPos)
-+        return SZ_ERROR_DATA;
-+      {
-+        SizeT rem = limit - dicPos;
-+        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
-+        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
-+
-+        processedPos += curLen;
-+
-+        len -= curLen;
-+        if (pos + curLen <= dicBufSize)
-+        {
-+          Byte *dest = dic + dicPos;
-+          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
-+          const Byte *lim = dest + curLen;
-+          dicPos += curLen;
-+          do
-+            *(dest) = (Byte)*(dest + src);
-+          while (++dest != lim);
-+        }
-+        else
-+        {
-+          do
-+          {
-+            dic[dicPos++] = dic[pos];
-+            if (++pos == dicBufSize)
-+              pos = 0;
-+          }
-+          while (--curLen != 0);
-+        }
-+      }
-+    }
-+  }
-+  while (dicPos < limit && buf < bufLimit);
-+  NORMALIZE;
-+  p->buf = buf;
-+  p->range = range;
-+  p->code = code;
-+  p->remainLen = len;
-+  p->dicPos = dicPos;
-+  p->processedPos = processedPos;
-+  p->reps[0] = rep0;
-+  p->reps[1] = rep1;
-+  p->reps[2] = rep2;
-+  p->reps[3] = rep3;
-+  p->state = state;
-+
-+  return SZ_OK;
-+}
-+
-+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
-+{
-+  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
-+  {
-+    Byte *dic = p->dic;
-+    SizeT dicPos = p->dicPos;
-+    SizeT dicBufSize = p->dicBufSize;
-+    unsigned len = p->remainLen;
-+    UInt32 rep0 = p->reps[0];
-+    if (limit - dicPos < len)
-+      len = (unsigned)(limit - dicPos);
-+
-+    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
-+      p->checkDicSize = p->prop.dicSize;
-+
-+    p->processedPos += len;
-+    p->remainLen -= len;
-+    while (len-- != 0)
-+    {
-+      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+      dicPos++;
-+    }
-+    p->dicPos = dicPos;
-+  }
-+}
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  do
-+  {
-+    SizeT limit2 = limit;
-+    if (p->checkDicSize == 0)
-+    {
-+      UInt32 rem = p->prop.dicSize - p->processedPos;
-+      if (limit - p->dicPos > rem)
-+        limit2 = p->dicPos + rem;
-+    }
-+    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
-+    if (p->processedPos >= p->prop.dicSize)
-+      p->checkDicSize = p->prop.dicSize;
-+    LzmaDec_WriteRem(p, limit);
-+  }
-+  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
-+
-+  if (p->remainLen > kMatchSpecLenStart)
-+  {
-+    p->remainLen = kMatchSpecLenStart;
-+  }
-+  return 0;
-+}
-+
-+typedef enum
-+{
-+  DUMMY_ERROR, /* unexpected end of input stream */
-+  DUMMY_LIT,
-+  DUMMY_MATCH,
-+  DUMMY_REP
-+} ELzmaDummy;
-+
-+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
-+{
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+  const Byte *bufLimit = buf + inSize;
-+  CLzmaProb *probs = p->probs;
-+  unsigned state = p->state;
-+  ELzmaDummy res;
-+
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0_CHECK(prob)
-+    {
-+      UPDATE_0_CHECK
-+
-+      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
-+
-+      prob = probs + Literal;
-+      if (p->checkDicSize != 0 || p->processedPos != 0)
-+        prob += (LZMA_LIT_SIZE *
-+          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
-+          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        unsigned symbol = 1;
-+        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
-+            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        unsigned symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      res = DUMMY_LIT;
-+    }
-+    else
-+    {
-+      unsigned len;
-+      UPDATE_1_CHECK;
-+
-+      prob = probs + IsRep + state;
-+      IF_BIT_0_CHECK(prob)
-+      {
-+        UPDATE_0_CHECK;
-+        state = 0;
-+        prob = probs + LenCoder;
-+        res = DUMMY_MATCH;
-+      }
-+      else
-+      {
-+        UPDATE_1_CHECK;
-+        res = DUMMY_REP;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0_CHECK(prob)
-+        {
-+          UPDATE_0_CHECK;
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+            NORMALIZE_CHECK;
-+            return DUMMY_REP;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+          }
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0_CHECK(prob)
-+            {
-+              UPDATE_0_CHECK;
-+            }
-+            else
-+            {
-+              UPDATE_1_CHECK;
-+            }
-+          }
-+        }
-+        state = kNumStates;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0_CHECK(probLen)
-+        {
-+          UPDATE_0_CHECK;
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = 1 << kLenNumLowBits;
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0_CHECK(probLen)
-+          {
-+            UPDATE_0_CHECK;
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = 1 << kLenNumMidBits;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = 1 << kLenNumHighBits;
-+          }
-+        }
-+        TREE_DECODE_CHECK(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state < 4)
-+      {
-+        unsigned posSlot;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
-+            kNumPosSlotBits);
-+        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+
-+          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
-+
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE_CHECK
-+              range >>= 1;
-+              code -= range & (((code - range) >> 31) - 1);
-+              /* if (code >= range) code -= range; */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            numDirectBits = kNumAlignBits;
-+          }
-+          {
-+            unsigned i = 1;
-+            do
-+            {
-+              GET_BIT_CHECK(prob + i, i);
-+            }
-+            while (--numDirectBits != 0);
-+          }
-+        }
-+      }
-+    }
-+  }
-+  NORMALIZE_CHECK;
-+  return res;
-+}
-+
-+
-+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
-+{
-+  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
-+  p->range = 0xFFFFFFFF;
-+  p->needFlush = 0;
-+}
-+
-+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+{
-+  p->needFlush = 1;
-+  p->remainLen = 0;
-+  p->tempBufSize = 0;
-+
-+  if (initDic)
-+  {
-+    p->processedPos = 0;
-+    p->checkDicSize = 0;
-+    p->needInitState = 1;
-+  }
-+  if (initState)
-+    p->needInitState = 1;
-+}
-+
-+void LzmaDec_Init(CLzmaDec *p)
-+{
-+  p->dicPos = 0;
-+  LzmaDec_InitDicAndState(p, True, True);
-+}
-+
-+static void LzmaDec_InitStateReal(CLzmaDec *p)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
-+  UInt32 i;
-+  CLzmaProb *probs = p->probs;
-+  for (i = 0; i < numProbs; i++)
-+    probs[i] = kBitModelTotal >> 1;
-+  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
-+  p->state = 0;
-+  p->needInitState = 0;
-+}
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+    ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT inSize = *srcLen;
-+  (*srcLen) = 0;
-+  LzmaDec_WriteRem(p, dicLimit);
-+  
-+  *status = LZMA_STATUS_NOT_SPECIFIED;
-+
-+  while (p->remainLen != kMatchSpecLenStart)
-+  {
-+      int checkEndMarkNow;
-+
-+      if (p->needFlush != 0)
-+      {
-+        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
-+          p->tempBuf[p->tempBufSize++] = *src++;
-+        if (p->tempBufSize < RC_INIT_SIZE)
-+        {
-+          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+          return SZ_OK;
-+        }
-+        if (p->tempBuf[0] != 0)
-+          return SZ_ERROR_DATA;
-+
-+        LzmaDec_InitRc(p, p->tempBuf);
-+        p->tempBufSize = 0;
-+      }
-+
-+      checkEndMarkNow = 0;
-+      if (p->dicPos >= dicLimit)
-+      {
-+        if (p->remainLen == 0 && p->code == 0)
-+        {
-+          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
-+          return SZ_OK;
-+        }
-+        if (finishMode == LZMA_FINISH_ANY)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_OK;
-+        }
-+        if (p->remainLen != 0)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_ERROR_DATA;
-+        }
-+        checkEndMarkNow = 1;
-+      }
-+
-+      if (p->needInitState)
-+        LzmaDec_InitStateReal(p);
-+  
-+      if (p->tempBufSize == 0)
-+      {
-+        SizeT processed;
-+        const Byte *bufLimit;
-+        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            memcpy(p->tempBuf, src, inSize);
-+            p->tempBufSize = (unsigned)inSize;
-+            (*srcLen) += inSize;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+          bufLimit = src;
-+        }
-+        else
-+          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
-+        p->buf = src;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
-+          return SZ_ERROR_DATA;
-+        processed = (SizeT)(p->buf - src);
-+        (*srcLen) += processed;
-+        src += processed;
-+        inSize -= processed;
-+      }
-+      else
-+      {
-+        unsigned rem = p->tempBufSize, lookAhead = 0;
-+        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
-+          p->tempBuf[rem++] = src[lookAhead++];
-+        p->tempBufSize = rem;
-+        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            (*srcLen) += lookAhead;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+        }
-+        p->buf = p->tempBuf;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
-+          return SZ_ERROR_DATA;
-+        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
-+        (*srcLen) += lookAhead;
-+        src += lookAhead;
-+        inSize -= lookAhead;
-+        p->tempBufSize = 0;
-+      }
-+  }
-+  if (p->code == 0)
-+    *status = LZMA_STATUS_FINISHED_WITH_MARK;
-+  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
-+}
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT outSize = *destLen;
-+  SizeT inSize = *srcLen;
-+  *srcLen = *destLen = 0;
-+  for (;;)
-+  {
-+    SizeT inSizeCur = inSize, outSizeCur, dicPos;
-+    ELzmaFinishMode curFinishMode;
-+    SRes res;
-+    if (p->dicPos == p->dicBufSize)
-+      p->dicPos = 0;
-+    dicPos = p->dicPos;
-+    if (outSize > p->dicBufSize - dicPos)
-+    {
-+      outSizeCur = p->dicBufSize;
-+      curFinishMode = LZMA_FINISH_ANY;
-+    }
-+    else
-+    {
-+      outSizeCur = dicPos + outSize;
-+      curFinishMode = finishMode;
-+    }
-+
-+    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-+    src += inSizeCur;
-+    inSize -= inSizeCur;
-+    *srcLen += inSizeCur;
-+    outSizeCur = p->dicPos - dicPos;
-+    memcpy(dest, p->dic + dicPos, outSizeCur);
-+    dest += outSizeCur;
-+    outSize -= outSizeCur;
-+    *destLen += outSizeCur;
-+    if (res != 0)
-+      return res;
-+    if (outSizeCur == 0 || outSize == 0)
-+      return SZ_OK;
-+  }
-+}
-+
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->probs);
-+  p->probs = 0;
-+}
-+
-+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->dic);
-+  p->dic = 0;
-+}
-+
-+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  LzmaDec_FreeProbs(p, alloc);
-+  LzmaDec_FreeDict(p, alloc);
-+}
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+{
-+  UInt32 dicSize;
-+  Byte d;
-+  
-+  if (size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_UNSUPPORTED;
-+  else
-+    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
-+ 
-+  if (dicSize < LZMA_DIC_MIN)
-+    dicSize = LZMA_DIC_MIN;
-+  p->dicSize = dicSize;
-+
-+  d = data[0];
-+  if (d >= (9 * 5 * 5))
-+    return SZ_ERROR_UNSUPPORTED;
-+
-+  p->lc = d % 9;
-+  d /= 9;
-+  p->pb = d / 5;
-+  p->lp = d % 5;
-+
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
-+{
-+  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
-+  if (p->probs == 0 || numProbs != p->numProbs)
-+  {
-+    LzmaDec_FreeProbs(p, alloc);
-+    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
-+    p->numProbs = numProbs;
-+    if (p->probs == 0)
-+      return SZ_ERROR_MEM;
-+  }
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  SizeT dicBufSize;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  dicBufSize = propNew.dicSize;
-+  if (p->dic == 0 || dicBufSize != p->dicBufSize)
-+  {
-+    LzmaDec_FreeDict(p, alloc);
-+    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-+    if (p->dic == 0)
-+    {
-+      LzmaDec_FreeProbs(p, alloc);
-+      return SZ_ERROR_MEM;
-+    }
-+  }
-+  p->dicBufSize = dicBufSize;
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc)
-+{
-+  CLzmaDec p;
-+  SRes res;
-+  SizeT inSize = *srcLen;
-+  SizeT outSize = *destLen;
-+  *srcLen = *destLen = 0;
-+  if (inSize < RC_INIT_SIZE)
-+    return SZ_ERROR_INPUT_EOF;
-+
-+  LzmaDec_Construct(&p);
-+  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
-+  if (res != 0)
-+    return res;
-+  p.dic = dest;
-+  p.dicBufSize = outSize;
-+
-+  LzmaDec_Init(&p);
-+  
-+  *srcLen = inSize;
-+  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
-+
-+  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
-+    res = SZ_ERROR_INPUT_EOF;
-+
-+  (*destLen) = p.dicPos;
-+  LzmaDec_FreeProbs(&p, alloc);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaEnc.c
-@@ -0,0 +1,2271 @@
-+/* LzmaEnc.c -- LZMA Encoder
-+2009-11-24 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+/* #define SHOW_STAT */
-+/* #define SHOW_STAT2 */
-+
-+#if defined(SHOW_STAT) || defined(SHOW_STAT2)
-+#include <stdio.h>
-+#endif
-+
-+#include "LzmaEnc.h"
-+
-+/* disable MT */
-+#define _7ZIP_ST
-+
-+#include "LzFind.h"
-+#ifndef _7ZIP_ST
-+#include "LzFindMt.h"
-+#endif
-+
-+#ifdef SHOW_STAT
-+static int ttt = 0;
-+#endif
-+
-+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
-+
-+#define kBlockSize (9 << 10)
-+#define kUnpackBlockSize (1 << 18)
-+#define kMatchArraySize (1 << 21)
-+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
-+
-+#define kNumMaxDirectBits (31)
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+#define kProbInitValue (kBitModelTotal >> 1)
-+
-+#define kNumMoveReducingBits 4
-+#define kNumBitPriceShiftBits 4
-+#define kBitPrice (1 << kNumBitPriceShiftBits)
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p)
-+{
-+  p->level = 5;
-+  p->dictSize = p->mc = 0;
-+  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
-+  p->writeEndMark = 0;
-+}
-+
-+void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+{
-+  int level = p->level;
-+  if (level < 0) level = 5;
-+  p->level = level;
-+  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
-+  if (p->lc < 0) p->lc = 3;
-+  if (p->lp < 0) p->lp = 0;
-+  if (p->pb < 0) p->pb = 2;
-+  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
-+  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
-+  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
-+  if (p->numHashBytes < 0) p->numHashBytes = 4;
-+  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
-+  if (p->numThreads < 0)
-+    p->numThreads =
-+      #ifndef _7ZIP_ST
-+      ((p->btMode && p->algo) ? 2 : 1);
-+      #else
-+      1;
-+      #endif
-+}
-+
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+{
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+  return props.dictSize;
-+}
-+
-+/* #define LZMA_LOG_BSR */
-+/* Define it for Intel's CPU */
-+
-+
-+#ifdef LZMA_LOG_BSR
-+
-+#define kDicLogSizeMaxCompress 30
-+
-+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-+
-+UInt32 GetPosSlot1(UInt32 pos)
-+{
-+  UInt32 res;
-+  BSR2_RET(pos, res);
-+  return res;
-+}
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
-+
-+#else
-+
-+#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
-+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-+
-+void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+{
-+  int c = 2, slotFast;
-+  g_FastPos[0] = 0;
-+  g_FastPos[1] = 1;
-+  
-+  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
-+  {
-+    UInt32 k = (1 << ((slotFast >> 1) - 1));
-+    UInt32 j;
-+    for (j = 0; j < k; j++, c++)
-+      g_FastPos[c] = (Byte)slotFast;
-+  }
-+}
-+
-+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
-+  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
-+  res = p->g_FastPos[pos >> i] + (i * 2); }
-+/*
-+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
-+  p->g_FastPos[pos >> 6] + 12 : \
-+  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
-+*/
-+
-+#define GetPosSlot1(pos) p->g_FastPos[pos]
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
-+
-+#endif
-+
-+
-+#define LZMA_NUM_REPS 4
-+
-+typedef unsigned CState;
-+
-+typedef struct
-+{
-+  UInt32 price;
-+
-+  CState state;
-+  int prev1IsChar;
-+  int prev2;
-+
-+  UInt32 posPrev2;
-+  UInt32 backPrev2;
-+
-+  UInt32 posPrev;
-+  UInt32 backPrev;
-+  UInt32 backs[LZMA_NUM_REPS];
-+} COptimal;
-+
-+#define kNumOpts (1 << 12)
-+
-+#define kNumLenToPosStates 4
-+#define kNumPosSlotBits 6
-+#define kDicLogSizeMin 0
-+#define kDicLogSizeMax 32
-+#define kDistTableSizeMax (kDicLogSizeMax * 2)
-+
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+#define kAlignMask (kAlignTableSize - 1)
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
-+
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+#define LZMA_PB_MAX 4
-+#define LZMA_LC_MAX 8
-+#define LZMA_LP_MAX 4
-+
-+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
-+
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define LZMA_MATCH_LEN_MIN 2
-+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
-+
-+#define kNumStates 12
-+
-+typedef struct
-+{
-+  CLzmaProb choice;
-+  CLzmaProb choice2;
-+  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
-+  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
-+  CLzmaProb high[kLenNumHighSymbols];
-+} CLenEnc;
-+
-+typedef struct
-+{
-+  CLenEnc p;
-+  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
-+  UInt32 tableSize;
-+  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
-+} CLenPriceEnc;
-+
-+typedef struct
-+{
-+  UInt32 range;
-+  Byte cache;
-+  UInt64 low;
-+  UInt64 cacheSize;
-+  Byte *buf;
-+  Byte *bufLim;
-+  Byte *bufBase;
-+  ISeqOutStream *outStream;
-+  UInt64 processed;
-+  SRes res;
-+} CRangeEnc;
-+
-+typedef struct
-+{
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+  
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+} CSaveState;
-+
-+typedef struct
-+{
-+  IMatchFinder matchFinder;
-+  void *matchFinderObj;
-+
-+  #ifndef _7ZIP_ST
-+  Bool mtMode;
-+  CMatchFinderMt matchFinderMt;
-+  #endif
-+
-+  CMatchFinder matchFinderBase;
-+
-+  #ifndef _7ZIP_ST
-+  Byte pad[128];
-+  #endif
-+  
-+  UInt32 optimumEndIndex;
-+  UInt32 optimumCurrentIndex;
-+
-+  UInt32 longestMatchLength;
-+  UInt32 numPairs;
-+  UInt32 numAvail;
-+  COptimal opt[kNumOpts];
-+  
-+  #ifndef LZMA_LOG_BSR
-+  Byte g_FastPos[1 << kNumLogBits];
-+  #endif
-+
-+  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
-+  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
-+  UInt32 numFastBytes;
-+  UInt32 additionalOffset;
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+
-+  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
-+  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
-+  UInt32 alignPrices[kAlignTableSize];
-+  UInt32 alignPriceCount;
-+
-+  UInt32 distTableSize;
-+
-+  unsigned lc, lp, pb;
-+  unsigned lpMask, pbMask;
-+
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+  
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  unsigned lclp;
-+
-+  Bool fastMode;
-+  
-+  CRangeEnc rc;
-+
-+  Bool writeEndMark;
-+  UInt64 nowPos64;
-+  UInt32 matchPriceCount;
-+  Bool finished;
-+  Bool multiThread;
-+
-+  SRes result;
-+  UInt32 dictSize;
-+  UInt32 matchFinderCycles;
-+
-+  int needInit;
-+
-+  CSaveState saveState;
-+} CLzmaEnc;
-+
-+void LzmaEnc_SaveState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CSaveState *dest = &p->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
-+}
-+
-+void LzmaEnc_RestoreState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *dest = (CLzmaEnc *)pp;
-+  const CSaveState *p = &dest->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
-+}
-+
-+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+
-+  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
-+      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
-+    return SZ_ERROR_PARAM;
-+  p->dictSize = props.dictSize;
-+  p->matchFinderCycles = props.mc;
-+  {
-+    unsigned fb = props.fb;
-+    if (fb < 5)
-+      fb = 5;
-+    if (fb > LZMA_MATCH_LEN_MAX)
-+      fb = LZMA_MATCH_LEN_MAX;
-+    p->numFastBytes = fb;
-+  }
-+  p->lc = props.lc;
-+  p->lp = props.lp;
-+  p->pb = props.pb;
-+  p->fastMode = (props.algo == 0);
-+  p->matchFinderBase.btMode = props.btMode;
-+  {
-+    UInt32 numHashBytes = 4;
-+    if (props.btMode)
-+    {
-+      if (props.numHashBytes < 2)
-+        numHashBytes = 2;
-+      else if (props.numHashBytes < 4)
-+        numHashBytes = props.numHashBytes;
-+    }
-+    p->matchFinderBase.numHashBytes = numHashBytes;
-+  }
-+
-+  p->matchFinderBase.cutValue = props.mc;
-+
-+  p->writeEndMark = props.writeEndMark;
-+
-+  #ifndef _7ZIP_ST
-+  /*
-+  if (newMultiThread != _multiThread)
-+  {
-+    ReleaseMatchFinder();
-+    _multiThread = newMultiThread;
-+  }
-+  */
-+  p->multiThread = (props.numThreads > 1);
-+  #endif
-+
-+  return SZ_OK;
-+}
-+
-+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
-+static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
-+static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
-+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
-+
-+#define IsCharState(s) ((s) < 7)
-+
-+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
-+
-+#define kInfinityPrice (1 << 30)
-+
-+static void RangeEnc_Construct(CRangeEnc *p)
-+{
-+  p->outStream = 0;
-+  p->bufBase = 0;
-+}
-+
-+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
-+
-+#define RC_BUF_SIZE (1 << 16)
-+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  if (p->bufBase == 0)
-+  {
-+    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
-+    if (p->bufBase == 0)
-+      return 0;
-+    p->bufLim = p->bufBase + RC_BUF_SIZE;
-+  }
-+  return 1;
-+}
-+
-+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->bufBase);
-+  p->bufBase = 0;
-+}
-+
-+static void RangeEnc_Init(CRangeEnc *p)
-+{
-+  /* Stream.Init(); */
-+  p->low = 0;
-+  p->range = 0xFFFFFFFF;
-+  p->cacheSize = 1;
-+  p->cache = 0;
-+
-+  p->buf = p->bufBase;
-+
-+  p->processed = 0;
-+  p->res = SZ_OK;
-+}
-+
-+static void RangeEnc_FlushStream(CRangeEnc *p)
-+{
-+  size_t num;
-+  if (p->res != SZ_OK)
-+    return;
-+  num = p->buf - p->bufBase;
-+  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
-+    p->res = SZ_ERROR_WRITE;
-+  p->processed += num;
-+  p->buf = p->bufBase;
-+}
-+
-+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
-+{
-+  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
-+  {
-+    Byte temp = p->cache;
-+    do
-+    {
-+      Byte *buf = p->buf;
-+      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
-+      p->buf = buf;
-+      if (buf == p->bufLim)
-+        RangeEnc_FlushStream(p);
-+      temp = 0xFF;
-+    }
-+    while (--p->cacheSize != 0);
-+    p->cache = (Byte)((UInt32)p->low >> 24);
-+  }
-+  p->cacheSize++;
-+  p->low = (UInt32)p->low << 8;
-+}
-+
-+static void RangeEnc_FlushData(CRangeEnc *p)
-+{
-+  int i;
-+  for (i = 0; i < 5; i++)
-+    RangeEnc_ShiftLow(p);
-+}
-+
-+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
-+{
-+  do
-+  {
-+    p->range >>= 1;
-+    p->low += p->range & (0 - ((value >> --numBits) & 1));
-+    if (p->range < kTopValue)
-+    {
-+      p->range <<= 8;
-+      RangeEnc_ShiftLow(p);
-+    }
-+  }
-+  while (numBits != 0);
-+}
-+
-+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
-+{
-+  UInt32 ttt = *prob;
-+  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
-+  if (symbol == 0)
-+  {
-+    p->range = newBound;
-+    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
-+  }
-+  else
-+  {
-+    p->low += newBound;
-+    p->range -= newBound;
-+    ttt -= ttt >> kNumMoveBits;
-+  }
-+  *prob = (CLzmaProb)ttt;
-+  if (p->range < kTopValue)
-+  {
-+    p->range <<= 8;
-+    RangeEnc_ShiftLow(p);
-+  }
-+}
-+
-+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
-+{
-+  symbol |= 0x100;
-+  do
-+  {
-+    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
-+{
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+{
-+  UInt32 i;
-+  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-+  {
-+    const int kCyclesBits = kNumBitPriceShiftBits;
-+    UInt32 w = i;
-+    UInt32 bitCount = 0;
-+    int j;
-+    for (j = 0; j < kCyclesBits; j++)
-+    {
-+      w = w * w;
-+      bitCount <<= 1;
-+      while (w >= ((UInt32)1 << 16))
-+      {
-+        w >>= 1;
-+        bitCount++;
-+      }
-+    }
-+    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
-+  }
-+}
-+
-+
-+#define GET_PRICE(prob, symbol) \
-+  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICEa(prob, symbol) \
-+  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= 0x100;
-+  do
-+  {
-+    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+
-+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0;)
-+  {
-+    UInt32 bit;
-+    i--;
-+    bit = (symbol >> i) & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+  }
-+}
-+
-+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = 0; i < numBitLevels; i++)
-+  {
-+    UInt32 bit = symbol & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+    symbol >>= 1;
-+  }
-+}
-+
-+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= (1 << numBitLevels);
-+  while (symbol != 1)
-+  {
-+    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
-+    symbol >>= 1;
-+  }
-+  return price;
-+}
-+
-+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0; i--)
-+  {
-+    UInt32 bit = symbol & 1;
-+    symbol >>= 1;
-+    price += GET_PRICEa(probs[m], bit);
-+    m = (m << 1) | bit;
-+  }
-+  return price;
-+}
-+
-+
-+static void LenEnc_Init(CLenEnc *p)
-+{
-+  unsigned i;
-+  p->choice = p->choice2 = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
-+    p->low[i] = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
-+    p->mid[i] = kProbInitValue;
-+  for (i = 0; i < kLenNumHighSymbols; i++)
-+    p->high[i] = kProbInitValue;
-+}
-+
-+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
-+{
-+  if (symbol < kLenNumLowSymbols)
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 0);
-+    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
-+  }
-+  else
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 1);
-+    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 0);
-+      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 1);
-+      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
-+    }
-+  }
-+}
-+
-+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
-+{
-+  UInt32 a0 = GET_PRICE_0a(p->choice);
-+  UInt32 a1 = GET_PRICE_1a(p->choice);
-+  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
-+  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
-+  UInt32 i = 0;
-+  for (i = 0; i < kLenNumLowSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
-+  }
-+  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
-+  }
-+  for (; i < numSymbols; i++)
-+    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
-+}
-+
-+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
-+{
-+  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
-+  p->counters[posState] = p->tableSize;
-+}
-+
-+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
-+{
-+  UInt32 posState;
-+  for (posState = 0; posState < numPosStates; posState++)
-+    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
-+{
-+  LenEnc_Encode(&p->p, rc, symbol, posState);
-+  if (updatePrice)
-+    if (--p->counters[posState] == 0)
-+      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+
-+
-+
-+static void MovePos(CLzmaEnc *p, UInt32 num)
-+{
-+  #ifdef SHOW_STAT
-+  ttt += num;
-+  printf("\n MovePos %d", num);
-+  #endif
-+  if (num != 0)
-+  {
-+    p->additionalOffset += num;
-+    p->matchFinder.Skip(p->matchFinderObj, num);
-+  }
-+}
-+
-+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
-+{
-+  UInt32 lenRes = 0, numPairs;
-+  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
-+  #ifdef SHOW_STAT
-+  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
-+  ttt++;
-+  {
-+    UInt32 i;
-+    for (i = 0; i < numPairs; i += 2)
-+      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
-+  }
-+  #endif
-+  if (numPairs > 0)
-+  {
-+    lenRes = p->matches[numPairs - 2];
-+    if (lenRes == p->numFastBytes)
-+    {
-+      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+      UInt32 distance = p->matches[numPairs - 1] + 1;
-+      UInt32 numAvail = p->numAvail;
-+      if (numAvail > LZMA_MATCH_LEN_MAX)
-+        numAvail = LZMA_MATCH_LEN_MAX;
-+      {
-+        const Byte *pby2 = pby - distance;
-+        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
-+      }
-+    }
-+  }
-+  p->additionalOffset++;
-+  *numDistancePairsRes = numPairs;
-+  return lenRes;
-+}
-+
-+
-+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
-+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
-+#define IsShortRep(p) ((p)->backPrev == 0)
-+
-+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
-+{
-+  return
-+    GET_PRICE_0(p->isRepG0[state]) +
-+    GET_PRICE_0(p->isRep0Long[state][posState]);
-+}
-+
-+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
-+{
-+  UInt32 price;
-+  if (repIndex == 0)
-+  {
-+    price = GET_PRICE_0(p->isRepG0[state]);
-+    price += GET_PRICE_1(p->isRep0Long[state][posState]);
-+  }
-+  else
-+  {
-+    price = GET_PRICE_1(p->isRepG0[state]);
-+    if (repIndex == 1)
-+      price += GET_PRICE_0(p->isRepG1[state]);
-+    else
-+    {
-+      price += GET_PRICE_1(p->isRepG1[state]);
-+      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
-+    }
-+  }
-+  return price;
-+}
-+
-+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
-+{
-+  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
-+    GetPureRepPrice(p, repIndex, state, posState);
-+}
-+
-+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
-+{
-+  UInt32 posMem = p->opt[cur].posPrev;
-+  UInt32 backMem = p->opt[cur].backPrev;
-+  p->optimumEndIndex = cur;
-+  do
-+  {
-+    if (p->opt[cur].prev1IsChar)
-+    {
-+      MakeAsChar(&p->opt[posMem])
-+      p->opt[posMem].posPrev = posMem - 1;
-+      if (p->opt[cur].prev2)
-+      {
-+        p->opt[posMem - 1].prev1IsChar = False;
-+        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
-+        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
-+      }
-+    }
-+    {
-+      UInt32 posPrev = posMem;
-+      UInt32 backCur = backMem;
-+      
-+      backMem = p->opt[posPrev].backPrev;
-+      posMem = p->opt[posPrev].posPrev;
-+      
-+      p->opt[posPrev].backPrev = backCur;
-+      p->opt[posPrev].posPrev = cur;
-+      cur = posPrev;
-+    }
-+  }
-+  while (cur != 0);
-+  *backRes = p->opt[0].backPrev;
-+  p->optimumCurrentIndex  = p->opt[0].posPrev;
-+  return p->optimumCurrentIndex;
-+}
-+
-+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
-+
-+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
-+  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
-+  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
-+  UInt32 *matches;
-+  const Byte *data;
-+  Byte curByte, matchByte;
-+  if (p->optimumEndIndex != p->optimumCurrentIndex)
-+  {
-+    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
-+    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
-+    *backRes = opt->backPrev;
-+    p->optimumCurrentIndex = opt->posPrev;
-+    return lenRes;
-+  }
-+  p->optimumCurrentIndex = p->optimumEndIndex = 0;
-+  
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  if (numAvail < 2)
-+  {
-+    *backRes = (UInt32)(-1);
-+    return 1;
-+  }
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  repMaxIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 lenTest;
-+    const Byte *data2;
-+    reps[i] = p->reps[i];
-+    data2 = data - (reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+    {
-+      repLens[i] = 0;
-+      continue;
-+    }
-+    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+    repLens[i] = lenTest;
-+    if (lenTest > repLens[repMaxIndex])
-+      repMaxIndex = i;
-+  }
-+  if (repLens[repMaxIndex] >= p->numFastBytes)
-+  {
-+    UInt32 lenRes;
-+    *backRes = repMaxIndex;
-+    lenRes = repLens[repMaxIndex];
-+    MovePos(p, lenRes - 1);
-+    return lenRes;
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+  curByte = *data;
-+  matchByte = *(data - (reps[0] + 1));
-+
-+  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
-+  {
-+    *backRes = (UInt32)-1;
-+    return 1;
-+  }
-+
-+  p->opt[0].state = (CState)p->state;
-+
-+  posState = (position & p->pbMask);
-+
-+  {
-+    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
-+        (!IsCharState(p->state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+  }
-+
-+  MakeAsChar(&p->opt[1]);
-+
-+  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
-+  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
-+
-+  if (matchByte == curByte)
-+  {
-+    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
-+    if (shortRepPrice < p->opt[1].price)
-+    {
-+      p->opt[1].price = shortRepPrice;
-+      MakeAsShortRep(&p->opt[1]);
-+    }
-+  }
-+  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
-+
-+  if (lenEnd < 2)
-+  {
-+    *backRes = p->opt[1].backPrev;
-+    return 1;
-+  }
-+
-+  p->opt[1].posPrev = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+    p->opt[0].backs[i] = reps[i];
-+
-+  len = lenEnd;
-+  do
-+    p->opt[len--].price = kInfinityPrice;
-+  while (len >= 2);
-+
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 repLen = repLens[i];
-+    UInt32 price;
-+    if (repLen < 2)
-+      continue;
-+    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
-+    do
-+    {
-+      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
-+      COptimal *opt = &p->opt[repLen];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = i;
-+        opt->prev1IsChar = False;
-+      }
-+    }
-+    while (--repLen >= 2);
-+  }
-+
-+  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
-+
-+  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
-+  if (len <= mainLen)
-+  {
-+    UInt32 offs = 0;
-+    while (len > matches[offs])
-+      offs += 2;
-+    for (; ; len++)
-+    {
-+      COptimal *opt;
-+      UInt32 distance = matches[offs + 1];
-+
-+      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
-+      UInt32 lenToPosState = GetLenToPosState(len);
-+      if (distance < kNumFullDistances)
-+        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
-+      else
-+      {
-+        UInt32 slot;
-+        GetPosSlot2(distance, slot);
-+        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
-+      }
-+      opt = &p->opt[len];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = distance + LZMA_NUM_REPS;
-+        opt->prev1IsChar = False;
-+      }
-+      if (len == matches[offs])
-+      {
-+        offs += 2;
-+        if (offs == numPairs)
-+          break;
-+      }
-+    }
-+  }
-+
-+  cur = 0;
-+
-+    #ifdef SHOW_STAT2
-+    if (position >= 0)
-+    {
-+      unsigned i;
-+      printf("\n pos = %4X", position);
-+      for (i = cur; i <= lenEnd; i++)
-+      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
-+    }
-+    #endif
-+
-+  for (;;)
-+  {
-+    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
-+    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
-+    Bool nextIsChar;
-+    Byte curByte, matchByte;
-+    const Byte *data;
-+    COptimal *curOpt;
-+    COptimal *nextOpt;
-+
-+    cur++;
-+    if (cur == lenEnd)
-+      return Backward(p, backRes, cur);
-+
-+    newLen = ReadMatchDistances(p, &numPairs);
-+    if (newLen >= p->numFastBytes)
-+    {
-+      p->numPairs = numPairs;
-+      p->longestMatchLength = newLen;
-+      return Backward(p, backRes, cur);
-+    }
-+    position++;
-+    curOpt = &p->opt[cur];
-+    posPrev = curOpt->posPrev;
-+    if (curOpt->prev1IsChar)
-+    {
-+      posPrev--;
-+      if (curOpt->prev2)
-+      {
-+        state = p->opt[curOpt->posPrev2].state;
-+        if (curOpt->backPrev2 < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      else
-+        state = p->opt[posPrev].state;
-+      state = kLiteralNextStates[state];
-+    }
-+    else
-+      state = p->opt[posPrev].state;
-+    if (posPrev == cur - 1)
-+    {
-+      if (IsShortRep(curOpt))
-+        state = kShortRepNextStates[state];
-+      else
-+        state = kLiteralNextStates[state];
-+    }
-+    else
-+    {
-+      UInt32 pos;
-+      const COptimal *prevOpt;
-+      if (curOpt->prev1IsChar && curOpt->prev2)
-+      {
-+        posPrev = curOpt->posPrev2;
-+        pos = curOpt->backPrev2;
-+        state = kRepNextStates[state];
-+      }
-+      else
-+      {
-+        pos = curOpt->backPrev;
-+        if (pos < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      prevOpt = &p->opt[posPrev];
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        UInt32 i;
-+        reps[0] = prevOpt->backs[pos];
-+        for (i = 1; i <= pos; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+        for (; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i];
-+      }
-+      else
-+      {
-+        UInt32 i;
-+        reps[0] = (pos - LZMA_NUM_REPS);
-+        for (i = 1; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+      }
-+    }
-+    curOpt->state = (CState)state;
-+
-+    curOpt->backs[0] = reps[0];
-+    curOpt->backs[1] = reps[1];
-+    curOpt->backs[2] = reps[2];
-+    curOpt->backs[3] = reps[3];
-+
-+    curPrice = curOpt->price;
-+    nextIsChar = False;
-+    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+    curByte = *data;
-+    matchByte = *(data - (reps[0] + 1));
-+
-+    posState = (position & p->pbMask);
-+
-+    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
-+    {
-+      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+      curAnd1Price +=
-+        (!IsCharState(state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+    }
-+
-+    nextOpt = &p->opt[cur + 1];
-+
-+    if (curAnd1Price < nextOpt->price)
-+    {
-+      nextOpt->price = curAnd1Price;
-+      nextOpt->posPrev = cur;
-+      MakeAsChar(nextOpt);
-+      nextIsChar = True;
-+    }
-+
-+    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
-+    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
-+    
-+    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
-+    {
-+      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
-+      if (shortRepPrice <= nextOpt->price)
-+      {
-+        nextOpt->price = shortRepPrice;
-+        nextOpt->posPrev = cur;
-+        MakeAsShortRep(nextOpt);
-+        nextIsChar = True;
-+      }
-+    }
-+    numAvailFull = p->numAvail;
-+    {
-+      UInt32 temp = kNumOpts - 1 - cur;
-+      if (temp < numAvailFull)
-+        numAvailFull = temp;
-+    }
-+
-+    if (numAvailFull < 2)
-+      continue;
-+    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
-+
-+    if (!nextIsChar && matchByte != curByte) /* speed optimization */
-+    {
-+      /* try Literal + rep0 */
-+      UInt32 temp;
-+      UInt32 lenTest2;
-+      const Byte *data2 = data - (reps[0] + 1);
-+      UInt32 limit = p->numFastBytes + 1;
-+      if (limit > numAvailFull)
-+        limit = numAvailFull;
-+
-+      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
-+      lenTest2 = temp - 1;
-+      if (lenTest2 >= 2)
-+      {
-+        UInt32 state2 = kLiteralNextStates[state];
-+        UInt32 posStateNext = (position + 1) & p->pbMask;
-+        UInt32 nextRepMatchPrice = curAnd1Price +
-+            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+            GET_PRICE_1(p->isRep[state2]);
-+        /* for (; lenTest2 >= 2; lenTest2--) */
-+        {
-+          UInt32 curAndLenPrice;
-+          COptimal *opt;
-+          UInt32 offset = cur + 1 + lenTest2;
-+          while (lenEnd < offset)
-+            p->opt[++lenEnd].price = kInfinityPrice;
-+          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+          opt = &p->opt[offset];
-+          if (curAndLenPrice < opt->price)
-+          {
-+            opt->price = curAndLenPrice;
-+            opt->posPrev = cur + 1;
-+            opt->backPrev = 0;
-+            opt->prev1IsChar = True;
-+            opt->prev2 = False;
-+          }
-+        }
-+      }
-+    }
-+    
-+    startLen = 2; /* speed optimization */
-+    {
-+    UInt32 repIndex;
-+    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
-+    {
-+      UInt32 lenTest;
-+      UInt32 lenTestTemp;
-+      UInt32 price;
-+      const Byte *data2 = data - (reps[repIndex] + 1);
-+      if (data[0] != data2[0] || data[1] != data2[1])
-+        continue;
-+      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+      while (lenEnd < cur + lenTest)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+      lenTestTemp = lenTest;
-+      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
-+      do
-+      {
-+        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
-+        COptimal *opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = repIndex;
-+          opt->prev1IsChar = False;
-+        }
-+      }
-+      while (--lenTest >= 2);
-+      lenTest = lenTestTemp;
-+      
-+      if (repIndex == 0)
-+        startLen = lenTest + 1;
-+        
-+      /* if (_maxMode) */
-+        {
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kRepNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice =
-+                price + p->repLenEnc.prices[posState][lenTest - 2] +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (position + lenTest + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+            
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = repIndex;
-+              }
-+            }
-+          }
-+        }
-+    }
-+    }
-+    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
-+    if (newLen > numAvail)
-+    {
-+      newLen = numAvail;
-+      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
-+      matches[numPairs] = newLen;
-+      numPairs += 2;
-+    }
-+    if (newLen >= startLen)
-+    {
-+      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
-+      UInt32 offs, curBack, posSlot;
-+      UInt32 lenTest;
-+      while (lenEnd < cur + newLen)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+
-+      offs = 0;
-+      while (startLen > matches[offs])
-+        offs += 2;
-+      curBack = matches[offs + 1];
-+      GetPosSlot2(curBack, posSlot);
-+      for (lenTest = /*2*/ startLen; ; lenTest++)
-+      {
-+        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
-+        UInt32 lenToPosState = GetLenToPosState(lenTest);
-+        COptimal *opt;
-+        if (curBack < kNumFullDistances)
-+          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
-+        else
-+          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
-+        
-+        opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = curBack + LZMA_NUM_REPS;
-+          opt->prev1IsChar = False;
-+        }
-+
-+        if (/*_maxMode && */lenTest == matches[offs])
-+        {
-+          /* Try Match + Literal + Rep0 */
-+          const Byte *data2 = data - (curBack + 1);
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kMatchNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice = curAndLenPrice +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (posStateNext + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+            
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = curBack + LZMA_NUM_REPS;
-+              }
-+            }
-+          }
-+          offs += 2;
-+          if (offs == numPairs)
-+            break;
-+          curBack = matches[offs + 1];
-+          if (curBack >= kNumFullDistances)
-+            GetPosSlot2(curBack, posSlot);
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
-+
-+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
-+  const Byte *data;
-+  const UInt32 *matches;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  *backRes = (UInt32)-1;
-+  if (numAvail < 2)
-+    return 1;
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+
-+  repLen = repIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
-+    if (len >= p->numFastBytes)
-+    {
-+      *backRes = i;
-+      MovePos(p, len - 1);
-+      return len;
-+    }
-+    if (len > repLen)
-+    {
-+      repIndex = i;
-+      repLen = len;
-+    }
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+
-+  mainDist = 0; /* for GCC */
-+  if (mainLen >= 2)
-+  {
-+    mainDist = matches[numPairs - 1];
-+    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
-+    {
-+      if (!ChangePair(matches[numPairs - 3], mainDist))
-+        break;
-+      numPairs -= 2;
-+      mainLen = matches[numPairs - 2];
-+      mainDist = matches[numPairs - 1];
-+    }
-+    if (mainLen == 2 && mainDist >= 0x80)
-+      mainLen = 1;
-+  }
-+
-+  if (repLen >= 2 && (
-+        (repLen + 1 >= mainLen) ||
-+        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
-+        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
-+  {
-+    *backRes = repIndex;
-+    MovePos(p, repLen - 1);
-+    return repLen;
-+  }
-+  
-+  if (mainLen < 2 || numAvail <= 2)
-+    return 1;
-+
-+  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
-+  if (p->longestMatchLength >= 2)
-+  {
-+    UInt32 newDistance = matches[p->numPairs - 1];
-+    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
-+        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
-+        (p->longestMatchLength > mainLen + 1) ||
-+        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
-+      return 1;
-+  }
-+  
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len, limit;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    limit = mainLen - 1;
-+    for (len = 2; len < limit && data[len] == data2[len]; len++);
-+    if (len >= limit)
-+      return 1;
-+  }
-+  *backRes = mainDist + LZMA_NUM_REPS;
-+  MovePos(p, mainLen - 2);
-+  return mainLen;
-+}
-+
-+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
-+{
-+  UInt32 len;
-+  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+  p->state = kMatchNextStates[p->state];
-+  len = LZMA_MATCH_LEN_MIN;
-+  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
-+  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
-+  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
-+}
-+
-+static SRes CheckErrors(CLzmaEnc *p)
-+{
-+  if (p->result != SZ_OK)
-+    return p->result;
-+  if (p->rc.res != SZ_OK)
-+    p->result = SZ_ERROR_WRITE;
-+  if (p->matchFinderBase.result != SZ_OK)
-+    p->result = SZ_ERROR_READ;
-+  if (p->result != SZ_OK)
-+    p->finished = True;
-+  return p->result;
-+}
-+
-+static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
-+{
-+  /* ReleaseMFStream(); */
-+  p->finished = True;
-+  if (p->writeEndMark)
-+    WriteEndMarker(p, nowPos & p->pbMask);
-+  RangeEnc_FlushData(&p->rc);
-+  RangeEnc_FlushStream(&p->rc);
-+  return CheckErrors(p);
-+}
-+
-+static void FillAlignPrices(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < kAlignTableSize; i++)
-+    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
-+  p->alignPriceCount = 0;
-+}
-+
-+static void FillDistancesPrices(CLzmaEnc *p)
-+{
-+  UInt32 tempPrices[kNumFullDistances];
-+  UInt32 i, lenToPosState;
-+  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
-+  {
-+    UInt32 posSlot = GetPosSlot1(i);
-+    UInt32 footerBits = ((posSlot >> 1) - 1);
-+    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
-+  }
-+
-+  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
-+  {
-+    UInt32 posSlot;
-+    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
-+    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
-+    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
-+    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
-+
-+    {
-+      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
-+      UInt32 i;
-+      for (i = 0; i < kStartPosModelIndex; i++)
-+        distancesPrices[i] = posSlotPrices[i];
-+      for (; i < kNumFullDistances; i++)
-+        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
-+    }
-+  }
-+  p->matchPriceCount = 0;
-+}
-+
-+void LzmaEnc_Construct(CLzmaEnc *p)
-+{
-+  RangeEnc_Construct(&p->rc);
-+  MatchFinder_Construct(&p->matchFinderBase);
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Construct(&p->matchFinderMt);
-+  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
-+  #endif
-+
-+  {
-+    CLzmaEncProps props;
-+    LzmaEncProps_Init(&props);
-+    LzmaEnc_SetProps(p, &props);
-+  }
-+
-+  #ifndef LZMA_LOG_BSR
-+  LzmaEnc_FastPosInit(p->g_FastPos);
-+  #endif
-+
-+  LzmaEnc_InitPriceTables(p->ProbPrices);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
-+{
-+  void *p;
-+  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
-+  if (p != 0)
-+    LzmaEnc_Construct((CLzmaEnc *)p);
-+  return p;
-+}
-+
-+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->litProbs);
-+  alloc->Free(alloc, p->saveState.litProbs);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-+  #endif
-+  MatchFinder_Free(&p->matchFinderBase, allocBig);
-+  LzmaEnc_FreeLits(p, alloc);
-+  RangeEnc_Free(&p->rc, alloc);
-+}
-+
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
-+  alloc->Free(alloc, p);
-+}
-+
-+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
-+{
-+  UInt32 nowPos32, startPos32;
-+  if (p->needInit)
-+  {
-+    p->matchFinder.Init(p->matchFinderObj);
-+    p->needInit = 0;
-+  }
-+
-+  if (p->finished)
-+    return p->result;
-+  RINOK(CheckErrors(p));
-+
-+  nowPos32 = (UInt32)p->nowPos64;
-+  startPos32 = nowPos32;
-+
-+  if (p->nowPos64 == 0)
-+  {
-+    UInt32 numPairs;
-+    Byte curByte;
-+    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+      return Flush(p, nowPos32);
-+    ReadMatchDistances(p, &numPairs);
-+    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
-+    p->state = kLiteralNextStates[p->state];
-+    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
-+    LitEnc_Encode(&p->rc, p->litProbs, curByte);
-+    p->additionalOffset--;
-+    nowPos32++;
-+  }
-+
-+  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
-+  for (;;)
-+  {
-+    UInt32 pos, len, posState;
-+
-+    if (p->fastMode)
-+      len = GetOptimumFast(p, &pos);
-+    else
-+      len = GetOptimum(p, nowPos32, &pos);
-+
-+    #ifdef SHOW_STAT2
-+    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
-+    #endif
-+
-+    posState = nowPos32 & p->pbMask;
-+    if (len == 1 && pos == (UInt32)-1)
-+    {
-+      Byte curByte;
-+      CLzmaProb *probs;
-+      const Byte *data;
-+
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
-+      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+      curByte = *data;
-+      probs = LIT_PROBS(nowPos32, *(data - 1));
-+      if (IsCharState(p->state))
-+        LitEnc_Encode(&p->rc, probs, curByte);
-+      else
-+        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
-+      p->state = kLiteralNextStates[p->state];
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
-+        if (pos == 0)
-+        {
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
-+          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
-+        }
-+        else
-+        {
-+          UInt32 distance = p->reps[pos];
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
-+          if (pos == 1)
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
-+          else
-+          {
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
-+            if (pos == 3)
-+              p->reps[3] = p->reps[2];
-+            p->reps[2] = p->reps[1];
-+          }
-+          p->reps[1] = p->reps[0];
-+          p->reps[0] = distance;
-+        }
-+        if (len == 1)
-+          p->state = kShortRepNextStates[p->state];
-+        else
-+        {
-+          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+          p->state = kRepNextStates[p->state];
-+        }
-+      }
-+      else
-+      {
-+        UInt32 posSlot;
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+        p->state = kMatchNextStates[p->state];
-+        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+        pos -= LZMA_NUM_REPS;
-+        GetPosSlot(pos, posSlot);
-+        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
-+        
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          UInt32 footerBits = ((posSlot >> 1) - 1);
-+          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+          UInt32 posReduced = pos - base;
-+
-+          if (posSlot < kEndPosModelIndex)
-+            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
-+          else
-+          {
-+            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
-+            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
-+            p->alignPriceCount++;
-+          }
-+        }
-+        p->reps[3] = p->reps[2];
-+        p->reps[2] = p->reps[1];
-+        p->reps[1] = p->reps[0];
-+        p->reps[0] = pos;
-+        p->matchPriceCount++;
-+      }
-+    }
-+    p->additionalOffset -= len;
-+    nowPos32 += len;
-+    if (p->additionalOffset == 0)
-+    {
-+      UInt32 processed;
-+      if (!p->fastMode)
-+      {
-+        if (p->matchPriceCount >= (1 << 7))
-+          FillDistancesPrices(p);
-+        if (p->alignPriceCount >= kAlignTableSize)
-+          FillAlignPrices(p);
-+      }
-+      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+        break;
-+      processed = nowPos32 - startPos32;
-+      if (useLimits)
-+      {
-+        if (processed + kNumOpts + 300 >= maxUnpackSize ||
-+            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
-+          break;
-+      }
-+      else if (processed >= (1 << 15))
-+      {
-+        p->nowPos64 += nowPos32 - startPos32;
-+        return CheckErrors(p);
-+      }
-+    }
-+  }
-+  p->nowPos64 += nowPos32 - startPos32;
-+  return Flush(p, nowPos32);
-+}
-+
-+#define kBigHashDicLimit ((UInt32)1 << 24)
-+
-+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 beforeSize = kNumOpts;
-+  Bool btMode;
-+  if (!RangeEnc_Alloc(&p->rc, alloc))
-+    return SZ_ERROR_MEM;
-+  btMode = (p->matchFinderBase.btMode != 0);
-+  #ifndef _7ZIP_ST
-+  p->mtMode = (p->multiThread && !p->fastMode && btMode);
-+  #endif
-+
-+  {
-+    unsigned lclp = p->lc + p->lp;
-+    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
-+    {
-+      LzmaEnc_FreeLits(p, alloc);
-+      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      if (p->litProbs == 0 || p->saveState.litProbs == 0)
-+      {
-+        LzmaEnc_FreeLits(p, alloc);
-+        return SZ_ERROR_MEM;
-+      }
-+      p->lclp = lclp;
-+    }
-+  }
-+
-+  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
-+
-+  if (beforeSize + p->dictSize < keepWindowSize)
-+    beforeSize = keepWindowSize - p->dictSize;
-+
-+  #ifndef _7ZIP_ST
-+  if (p->mtMode)
-+  {
-+    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
-+    p->matchFinderObj = &p->matchFinderMt;
-+    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
-+  }
-+  else
-+  #endif
-+  {
-+    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
-+      return SZ_ERROR_MEM;
-+    p->matchFinderObj = &p->matchFinderBase;
-+    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
-+  }
-+  return SZ_OK;
-+}
-+
-+void LzmaEnc_Init(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  p->state = 0;
-+  for (i = 0 ; i < LZMA_NUM_REPS; i++)
-+    p->reps[i] = 0;
-+
-+  RangeEnc_Init(&p->rc);
-+
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    UInt32 j;
-+    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
-+    {
-+      p->isMatch[i][j] = kProbInitValue;
-+      p->isRep0Long[i][j] = kProbInitValue;
-+    }
-+    p->isRep[i] = kProbInitValue;
-+    p->isRepG0[i] = kProbInitValue;
-+    p->isRepG1[i] = kProbInitValue;
-+    p->isRepG2[i] = kProbInitValue;
-+  }
-+
-+  {
-+    UInt32 num = 0x300 << (p->lp + p->lc);
-+    for (i = 0; i < num; i++)
-+      p->litProbs[i] = kProbInitValue;
-+  }
-+
-+  {
-+    for (i = 0; i < kNumLenToPosStates; i++)
-+    {
-+      CLzmaProb *probs = p->posSlotEncoder[i];
-+      UInt32 j;
-+      for (j = 0; j < (1 << kNumPosSlotBits); j++)
-+        probs[j] = kProbInitValue;
-+    }
-+  }
-+  {
-+    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
-+      p->posEncoders[i] = kProbInitValue;
-+  }
-+
-+  LenEnc_Init(&p->lenEnc.p);
-+  LenEnc_Init(&p->repLenEnc.p);
-+
-+  for (i = 0; i < (1 << kNumAlignBits); i++)
-+    p->posAlignEncoder[i] = kProbInitValue;
-+
-+  p->optimumEndIndex = 0;
-+  p->optimumCurrentIndex = 0;
-+  p->additionalOffset = 0;
-+
-+  p->pbMask = (1 << p->pb) - 1;
-+  p->lpMask = (1 << p->lp) - 1;
-+}
-+
-+void LzmaEnc_InitPrices(CLzmaEnc *p)
-+{
-+  if (!p->fastMode)
-+  {
-+    FillDistancesPrices(p);
-+    FillAlignPrices(p);
-+  }
-+
-+  p->lenEnc.tableSize =
-+  p->repLenEnc.tableSize =
-+      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
-+  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
-+  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
-+}
-+
-+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 i;
-+  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
-+    if (p->dictSize <= ((UInt32)1 << i))
-+      break;
-+  p->distTableSize = i * 2;
-+
-+  p->finished = False;
-+  p->result = SZ_OK;
-+  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
-+  LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  p->nowPos64 = 0;
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  p->rc.outStream = outStream;
-+  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
-+}
-+
-+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-+    ISeqInStream *inStream, UInt32 keepWindowSize,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
-+{
-+  p->matchFinderBase.directInput = 1;
-+  p->matchFinderBase.bufferBase = (Byte *)src;
-+  p->matchFinderBase.directInputRem = srcLen;
-+}
-+
-+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+  p->needInit = 1;
-+
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+void LzmaEnc_Finish(CLzmaEncHandle pp)
-+{
-+  #ifndef _7ZIP_ST
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  if (p->mtMode)
-+    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
-+  #else
-+  pp = pp;
-+  #endif
-+}
-+
-+typedef struct
-+{
-+  ISeqOutStream funcTable;
-+  Byte *data;
-+  SizeT rem;
-+  Bool overflow;
-+} CSeqOutStreamBuf;
-+
-+static size_t MyWrite(void *pp, const void *data, size_t size)
-+{
-+  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
-+  if (p->rem < size)
-+  {
-+    size = p->rem;
-+    p->overflow = True;
-+  }
-+  memcpy(p->data, data, size);
-+  p->rem -= size;
-+  p->data += size;
-+  return size;
-+}
-+
-+
-+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+}
-+
-+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+}
-+
-+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-+    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  UInt64 nowPos64;
-+  SRes res;
-+  CSeqOutStreamBuf outStream;
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = False;
-+  p->finished = False;
-+  p->result = SZ_OK;
-+
-+  if (reInit)
-+    LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  nowPos64 = p->nowPos64;
-+  RangeEnc_Init(&p->rc);
-+  p->rc.outStream = &outStream.funcTable;
-+
-+  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
-+  
-+  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+
-+  return res;
-+}
-+
-+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
-+{
-+  SRes res = SZ_OK;
-+
-+  #ifndef _7ZIP_ST
-+  Byte allocaDummy[0x300];
-+  int i = 0;
-+  for (i = 0; i < 16; i++)
-+    allocaDummy[i] = (Byte)i;
-+  #endif
-+
-+  for (;;)
-+  {
-+    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
-+    if (res != SZ_OK || p->finished != 0)
-+      break;
-+    if (progress != 0)
-+    {
-+      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
-+      if (res != SZ_OK)
-+      {
-+        res = SZ_ERROR_PROGRESS;
-+        break;
-+      }
-+    }
-+  }
-+  LzmaEnc_Finish(p);
-+  return res;
-+}
-+
-+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-+  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
-+}
-+
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  int i;
-+  UInt32 dictSize = p->dictSize;
-+  if (*size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_PARAM;
-+  *size = LZMA_PROPS_SIZE;
-+  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
-+
-+  for (i = 11; i <= 30; i++)
-+  {
-+    if (dictSize <= ((UInt32)2 << i))
-+    {
-+      dictSize = (2 << i);
-+      break;
-+    }
-+    if (dictSize <= ((UInt32)3 << i))
-+    {
-+      dictSize = (3 << i);
-+      break;
-+    }
-+  }
-+
-+  for (i = 0; i < 4; i++)
-+    props[1 + i] = (Byte)(dictSize >> (8 * i));
-+  return SZ_OK;
-+}
-+
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  SRes res;
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+
-+  CSeqOutStreamBuf outStream;
-+
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = writeEndMark;
-+
-+  p->rc.outStream = &outStream.funcTable;
-+  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
-+  if (res == SZ_OK)
-+    res = LzmaEnc_Encode2(p, progress);
-+
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+  return res;
-+}
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-+  SRes res;
-+  if (p == 0)
-+    return SZ_ERROR_MEM;
-+
-+  res = LzmaEnc_SetProps(p, props);
-+  if (res == SZ_OK)
-+  {
-+    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-+    if (res == SZ_OK)
-+      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-+          writeEndMark, progress, alloc, allocBig);
-+  }
-+
-+  LzmaEnc_Destroy(p, alloc, allocBig);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/Makefile
-@@ -0,0 +1,7 @@
-+lzma_compress-objs := LzFind.o LzmaEnc.o
-+lzma_decompress-objs := LzmaDec.o
-+
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
-+
-+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/pending-4.9/532-jffs2_eofdetect.patch b/target/linux/generic/pending-4.9/532-jffs2_eofdetect.patch
deleted file mode 100644
index e9952c6d84..0000000000
--- a/target/linux/generic/pending-4.9/532-jffs2_eofdetect.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fs: jffs2: EOF marker
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/jffs2/build.c | 10 ++++++++++
- fs/jffs2/scan.c  | 21 +++++++++++++++++++--
- 2 files changed, 29 insertions(+), 2 deletions(-)
-
---- a/fs/jffs2/build.c
-+++ b/fs/jffs2/build.c
-@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct
- 	dbg_fsbuild("scanned flash completely\n");
- 	jffs2_dbg_dump_block_lists_nolock(c);
- 
-+	if (c->flags & (1 << 7)) {
-+		printk("%s(): unlocking the mtd device... ", __func__);
-+		mtd_unlock(c->mtd, 0, c->mtd->size);
-+		printk("done.\n");
-+
-+		printk("%s(): erasing all blocks after the end marker... ", __func__);
-+		jffs2_erase_pending_blocks(c, -1);
-+		printk("done.\n");
-+	}
-+
- 	dbg_fsbuild("pass 1 starting\n");
- 	c->flags |= JFFS2_SB_FLAG_BUILDING;
- 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
---- a/fs/jffs2/scan.c
-+++ b/fs/jffs2/scan.c
-@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
- 		/* reset summary info for next eraseblock scan */
- 		jffs2_sum_reset_collected(s);
- 
--		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
--						buf_size, s);
-+		if (c->flags & (1 << 7)) {
-+			if (mtd_block_isbad(c->mtd, jeb->offset))
-+				ret = BLK_STATE_BADBLOCK;
-+			else
-+				ret = BLK_STATE_ALLFF;
-+		} else
-+			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-+							buf_size, s);
- 
- 		if (ret < 0)
- 			goto out;
-@@ -561,6 +567,17 @@ full_scan:
- 			return err;
- 	}
- 
-+	if ((buf[0] == 0xde) &&
-+		(buf[1] == 0xad) &&
-+		(buf[2] == 0xc0) &&
-+		(buf[3] == 0xde)) {
-+		/* end of filesystem. erase everything after this point */
-+		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
-+		c->flags |= (1 << 7);
-+
-+		return BLK_STATE_ALLFF;
-+	}
-+
- 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
- 	ofs = 0;
- 	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
diff --git a/target/linux/generic/pending-4.9/551-ubifs-fix-default-compression-selection.patch b/target/linux/generic/pending-4.9/551-ubifs-fix-default-compression-selection.patch
deleted file mode 100644
index ca96cbbdb8..0000000000
--- a/target/linux/generic/pending-4.9/551-ubifs-fix-default-compression-selection.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: fs: ubifs: fix default compression selection in ubifs
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- fs/ubifs/sb.c | 13 ++++++++++++-
- 1 file changed, 12 insertions(+), 1 deletion(-)
-
---- a/fs/ubifs/sb.c
-+++ b/fs/ubifs/sb.c
-@@ -63,6 +63,17 @@
- /* Default time granularity in nanoseconds */
- #define DEFAULT_TIME_GRAN 1000000000
- 
-+static int get_default_compressor(void)
-+{
-+	if (ubifs_compr_present(UBIFS_COMPR_LZO))
-+		return UBIFS_COMPR_LZO;
-+
-+	if (ubifs_compr_present(UBIFS_COMPR_ZLIB))
-+		return UBIFS_COMPR_ZLIB;
-+
-+	return UBIFS_COMPR_NONE;
-+}
-+
- /**
-  * create_default_filesystem - format empty UBI volume.
-  * @c: UBIFS file-system description object
-@@ -183,7 +194,7 @@ static int create_default_filesystem(str
- 	if (c->mount_opts.override_compr)
- 		sup->default_compr = cpu_to_le16(c->mount_opts.compr_type);
- 	else
--		sup->default_compr = cpu_to_le16(UBIFS_COMPR_LZO);
-+		sup->default_compr = cpu_to_le16(get_default_compressor());
- 
- 	generate_random_uuid(sup->uuid);
- 
diff --git a/target/linux/generic/pending-4.9/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-4.9/600-netfilter_conntrack_flush.patch
deleted file mode 100644
index 81dac2ab23..0000000000
--- a/target/linux/generic/pending-4.9/600-netfilter_conntrack_flush.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: add support for flushing conntrack via /proc
-
-lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++-
- 1 file changed, 58 insertions(+), 1 deletion(-)
-
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -17,6 +17,7 @@
- #include <linux/percpu.h>
- #include <linux/netdevice.h>
- #include <linux/security.h>
-+#include <linux/inet.h>
- #include <net/net_namespace.h>
- #ifdef CONFIG_SYSCTL
- #include <linux/sysctl.h>
-@@ -298,10 +299,66 @@ static int ct_open(struct inode *inode,
- 			sizeof(struct ct_iter_state));
- }
- 
-+struct kill_request {
-+	u16 family;
-+	union nf_inet_addr addr;
-+};
-+
-+static int kill_matching(struct nf_conn *i, void *data)
-+{
-+	struct kill_request *kr = data;
-+	struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+	struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+	if (!kr->family)
-+		return 1;
-+
-+	if (t1->src.l3num != kr->family)
-+		return 0;
-+
-+	return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
-+}
-+
-+static ssize_t ct_file_write(struct file *file, const char __user *buf,
-+			     size_t count, loff_t *ppos)
-+{
-+	struct seq_file *seq = file->private_data;
-+	struct net *net = seq_file_net(seq);
-+	struct kill_request kr = { };
-+	char req[INET6_ADDRSTRLEN] = { };
-+
-+	if (count == 0)
-+		return 0;
-+
-+	if (count >= INET6_ADDRSTRLEN)
-+		count = INET6_ADDRSTRLEN - 1;
-+
-+	if (copy_from_user(req, buf, count))
-+		return -EFAULT;
-+
-+	if (strnchr(req, count, ':')) {
-+		kr.family = AF_INET6;
-+		if (!in6_pton(req, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	} else if (strnchr(req, count, '.')) {
-+		kr.family = AF_INET;
-+		if (!in4_pton(req, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	}
-+
-+	nf_ct_iterate_cleanup(net, kill_matching, &kr, 0, 0);
-+
-+	return count;
-+}
-+
- static const struct file_operations ct_file_ops = {
- 	.owner   = THIS_MODULE,
- 	.open    = ct_open,
- 	.read    = seq_read,
-+	.write	 = ct_file_write,
- 	.llseek  = seq_lseek,
- 	.release = seq_release_net,
- };
-@@ -405,7 +462,7 @@ static int nf_conntrack_standalone_init_
- 	kuid_t root_uid;
- 	kgid_t root_gid;
- 
--	pde = proc_create("nf_conntrack", 0440, net->proc_net, &ct_file_ops);
-+	pde = proc_create("nf_conntrack", 0660, net->proc_net, &ct_file_ops);
- 	if (!pde)
- 		goto out_nf_conntrack;
- 
diff --git a/target/linux/generic/pending-4.9/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-4.9/610-netfilter_match_bypass_default_checks.patch
deleted file mode 100644
index d3a6afa804..0000000000
--- a/target/linux/generic/pending-4.9/610-netfilter_match_bypass_default_checks.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/netfilter_ipv4/ip_tables.h |  1 +
- net/ipv4/netfilter/ip_tables.c                | 37 +++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
-@@ -88,6 +88,7 @@ struct ipt_ip {
- #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
- #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
- #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
- 
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -58,6 +58,9 @@ ip_packet_match(const struct iphdr *ip,
- {
- 	unsigned long ret;
- 
-+	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+		return true;
-+
- 	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
- 	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-@@ -88,6 +91,29 @@ ip_packet_match(const struct iphdr *ip,
- 	return true;
- }
- 
-+static void
-+ip_checkdefault(struct ipt_ip *ip)
-+{
-+	static const char iface_mask[IFNAMSIZ] = {};
-+
-+	if (ip->invflags || ip->flags & IPT_F_FRAG)
-+		return;
-+
-+	if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (ip->smsk.s_addr || ip->dmsk.s_addr)
-+		return;
-+
-+	if (ip->proto)
-+		return;
-+
-+	ip->flags |= IPT_F_NO_DEF_MATCH;
-+}
-+
- static bool
- ip_checkentry(const struct ipt_ip *ip)
- {
-@@ -550,6 +576,8 @@ find_check_entry(struct ipt_entry *e, st
- 	struct xt_mtchk_param mtpar;
- 	struct xt_entry_match *ematch;
- 
-+	ip_checkdefault(&e->ip);
-+
- 	if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
- 		return -ENOMEM;
- 
-@@ -830,6 +858,7 @@ copy_entries_to_user(unsigned int total_
- 	const struct xt_table_info *private = table->private;
- 	int ret = 0;
- 	const void *loc_cpu_entry;
-+	u8 flags;
- 
- 	counters = alloc_counters(table);
- 	if (IS_ERR(counters))
-@@ -857,6 +886,14 @@ copy_entries_to_user(unsigned int total_
- 			goto free_counters;
- 		}
- 
-+		flags = e->ip.flags & IPT_F_MASK;
-+		if (copy_to_user(userptr + off
-+				 + offsetof(struct ipt_entry, ip.flags),
-+				 &flags, sizeof(flags)) != 0) {
-+			ret = -EFAULT;
-+			goto free_counters;
-+		}
-+
- 		for (i = sizeof(struct ipt_entry);
- 		     i < e->target_offset;
- 		     i += m->u.match_size) {
-@@ -1246,12 +1283,15 @@ compat_copy_entry_to_user(struct ipt_ent
- 	compat_uint_t origsize;
- 	const struct xt_entry_match *ematch;
- 	int ret = 0;
-+	u8 flags = e->ip.flags & IPT_F_MASK;
- 
- 	origsize = *size;
- 	ce = (struct compat_ipt_entry __user *)*dstptr;
- 	if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
- 	    copy_to_user(&ce->counters, &counters[i],
--	    sizeof(counters[i])) != 0)
-+	    sizeof(counters[i])) != 0 ||
-+	    copy_to_user(&ce->ip.flags, &flags,
-+	    sizeof(flags)) != 0)
- 		return -EFAULT;
- 
- 	*dstptr += sizeof(struct compat_ipt_entry);
diff --git a/target/linux/generic/pending-4.9/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-4.9/611-netfilter_match_bypass_default_table.patch
deleted file mode 100644
index 12e4bd5c57..0000000000
--- a/target/linux/generic/pending-4.9/611-netfilter_match_bypass_default_table.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: match bypass default table
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++-----------
- 1 file changed, 58 insertions(+), 21 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -254,6 +254,33 @@ struct ipt_entry *ipt_next_entry(const s
- 	return (void *)entry + entry->next_offset;
- }
- 
-+static bool
-+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
-+{
-+	struct xt_entry_target *t;
-+	struct xt_standard_target *st;
-+
-+	if (e->target_offset != sizeof(struct ipt_entry))
-+		return false;
-+
-+	if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
-+		return false;
-+
-+	t = ipt_get_target(e);
-+	if (t->u.kernel.target->target)
-+		return false;
-+
-+	st = (struct xt_standard_target *) t;
-+	if (st->verdict == XT_RETURN)
-+		return false;
-+
-+	if (st->verdict >= 0)
-+		return false;
-+
-+	*verdict = (unsigned)(-st->verdict) - 1;
-+	return true;
-+}
-+
- /* Returns one of the generic firewall policies, like NF_ACCEPT. */
- unsigned int
- ipt_do_table(struct sk_buff *skb,
-@@ -274,28 +301,8 @@ ipt_do_table(struct sk_buff *skb,
- 	unsigned int addend;
- 
- 	/* Initialization */
--	stackidx = 0;
--	ip = ip_hdr(skb);
--	indev = state->in ? state->in->name : nulldevname;
--	outdev = state->out ? state->out->name : nulldevname;
--	/* We handle fragments by dealing with the first fragment as
--	 * if it was a normal packet.  All other fragments are treated
--	 * normally, except that they will NEVER match rules that ask
--	 * things we don't know, ie. tcp syn flag or ports).  If the
--	 * rule is also a fragment-specific rule, non-fragments won't
--	 * match it. */
--	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
--	acpar.thoff   = ip_hdrlen(skb);
--	acpar.hotdrop = false;
--	acpar.net     = state->net;
--	acpar.in      = state->in;
--	acpar.out     = state->out;
--	acpar.family  = NFPROTO_IPV4;
--	acpar.hooknum = hook;
--
- 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
- 	local_bh_disable();
--	addend = xt_write_recseq_begin();
- 	private = table->private;
- 	cpu        = smp_processor_id();
- 	/*
-@@ -304,6 +311,23 @@ ipt_do_table(struct sk_buff *skb,
- 	 */
- 	smp_read_barrier_depends();
- 	table_base = private->entries;
-+
-+	e = get_entry(table_base, private->hook_entry[hook]);
-+	if (ipt_handle_default_rule(e, &verdict)) {
-+		struct xt_counters *counter;
-+
-+		counter = xt_get_this_cpu_counter(&e->counters);
-+		ADD_COUNTER(*counter, skb->len, 1);
-+		local_bh_enable();
-+		return verdict;
-+	}
-+
-+	stackidx = 0;
-+	ip = ip_hdr(skb);
-+	indev = state->in ? state->in->name : nulldevname;
-+	outdev = state->out ? state->out->name : nulldevname;
-+
-+	addend = xt_write_recseq_begin();
- 	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
- 
- 	/* Switch to alternate jumpstack if we're being invoked via TEE.
-@@ -316,7 +340,20 @@ ipt_do_table(struct sk_buff *skb,
- 	if (static_key_false(&xt_tee_enabled))
- 		jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated);
- 
--	e = get_entry(table_base, private->hook_entry[hook]);
-+	/* We handle fragments by dealing with the first fragment as
-+	 * if it was a normal packet.  All other fragments are treated
-+	 * normally, except that they will NEVER match rules that ask
-+	 * things we don't know, ie. tcp syn flag or ports).  If the
-+	 * rule is also a fragment-specific rule, non-fragments won't
-+	 * match it. */
-+	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
-+	acpar.thoff   = ip_hdrlen(skb);
-+	acpar.hotdrop = false;
-+	acpar.net     = state->net;
-+	acpar.in      = state->in;
-+	acpar.out     = state->out;
-+	acpar.family  = NFPROTO_IPV4;
-+	acpar.hooknum = hook;
- 
- 	do {
- 		const struct xt_entry_target *t;
diff --git a/target/linux/generic/pending-4.9/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-4.9/612-netfilter_match_reduce_memory_access.patch
deleted file mode 100644
index c6c5172d2f..0000000000
--- a/target/linux/generic/pending-4.9/612-netfilter_match_reduce_memory_access.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: reduce match memory access
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -61,9 +61,9 @@ ip_packet_match(const struct iphdr *ip,
- 	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
- 		return true;
- 
--	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
-+	if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr &&
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
--	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-+	    NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr &&
- 		    (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr))
- 		return false;
- 
diff --git a/target/linux/generic/pending-4.9/613-netfilter_optional_tcp_window_check.patch b/target/linux/generic/pending-4.9/613-netfilter_optional_tcp_window_check.patch
deleted file mode 100644
index 78a9617762..0000000000
--- a/target/linux/generic/pending-4.9/613-netfilter_optional_tcp_window_check.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: optional tcp window check
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_proto_tcp.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -33,6 +33,9 @@
- #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
- #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
- 
-+/* Do not check the TCP window for incoming packets  */
-+static int nf_ct_tcp_no_window_check __read_mostly = 1;
-+
- /* "Be conservative in what you do,
-     be liberal in what you accept from others."
-     If it's non-zero, we mark only out of window RST segments as INVALID. */
-@@ -513,6 +516,9 @@ static bool tcp_in_window(const struct n
- 	s32 receiver_offset;
- 	bool res, in_recv_win;
- 
-+	if (nf_ct_tcp_no_window_check)
-+		return true;
-+
- 	/*
- 	 * Get the required data from the packet.
- 	 */
-@@ -1479,6 +1485,13 @@ static struct ctl_table tcp_sysctl_table
- 		.mode		= 0644,
- 		.proc_handler	= proc_dointvec,
- 	},
-+	{
-+		.procname       = "nf_conntrack_tcp_no_window_check",
-+		.data           = &nf_ct_tcp_no_window_check,
-+		.maxlen         = sizeof(unsigned int),
-+		.mode           = 0644,
-+		.proc_handler   = proc_dointvec,
-+	},
- 	{ }
- };
- #endif /* CONFIG_SYSCTL */
diff --git a/target/linux/generic/pending-4.9/616-net_optimize_xfrm_calls.patch b/target/linux/generic/pending-4.9/616-net_optimize_xfrm_calls.patch
deleted file mode 100644
index a147f5f94f..0000000000
--- a/target/linux/generic/pending-4.9/616-net_optimize_xfrm_calls.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a small xfrm related performance optimization
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_nat_core.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/net/netfilter/nf_nat_core.c
-+++ b/net/netfilter/nf_nat_core.c
-@@ -93,6 +93,9 @@ int nf_xfrm_me_harder(struct net *net, s
- 	struct dst_entry *dst;
- 	int err;
- 
-+	if (skb->dev && !dev_net(skb->dev)->xfrm.policy_count[XFRM_POLICY_OUT])
-+		return 0;
-+
- 	err = xfrm_decode_session(skb, &fl, family);
- 	if (err < 0)
- 		return err;
diff --git a/target/linux/generic/pending-4.9/620-net_sched-codel-do-not-defer-queue-length-update.patch b/target/linux/generic/pending-4.9/620-net_sched-codel-do-not-defer-queue-length-update.patch
deleted file mode 100644
index 6fe863a9e5..0000000000
--- a/target/linux/generic/pending-4.9/620-net_sched-codel-do-not-defer-queue-length-update.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Date: Mon, 21 Aug 2017 11:14:14 +0300
-Subject: [PATCH] net_sched/codel: do not defer queue length update
-
-When codel wants to drop last packet in ->dequeue() it cannot call
-qdisc_tree_reduce_backlog() right away - it will notify parent qdisc
-about zero qlen and HTB/HFSC will deactivate class. The same class will
-be deactivated second time by caller of ->dequeue(). Currently codel and
-fq_codel defer update. This triggers warning in HFSC when it's qlen != 0
-but there is no active classes.
-
-This patch update parent queue length immediately: just temporary increase
-qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation
-if we have skb to return.
-
-This might open another problem in HFSC - now operation peek could fail and
-deactivate parent class.
-
-Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581
----
-
---- a/net/sched/sch_codel.c
-+++ b/net/sched/sch_codel.c
-@@ -95,11 +95,17 @@ static struct sk_buff *codel_qdisc_deque
- 			    &q->stats, qdisc_pkt_len, codel_get_enqueue_time,
- 			    drop_func, dequeue_func);
- 
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
- 	 */
--	if (q->stats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len);
-+	if (q->stats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->stats.drop_count,
-+					  q->stats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
- 		q->stats.drop_count = 0;
- 		q->stats.drop_len = 0;
- 	}
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -318,6 +318,21 @@ begin:
- 	flow->dropped += q->cstats.drop_count - prev_drop_count;
- 	flow->dropped += q->cstats.ecn_mark - prev_ecn_mark;
- 
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
-+	 */
-+	if (q->cstats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
-+					  q->cstats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
-+		q->cstats.drop_count = 0;
-+		q->cstats.drop_len = 0;
-+	}
-+
- 	if (!skb) {
- 		/* force a pass through old_flows to prevent starvation */
- 		if ((head == &q->new_flows) && !list_empty(&q->old_flows))
-@@ -328,15 +343,6 @@ begin:
- 	}
- 	qdisc_bstats_update(sch, skb);
- 	flow->deficit -= qdisc_pkt_len(skb);
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
--	 */
--	if (q->cstats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
--					  q->cstats.drop_len);
--		q->cstats.drop_count = 0;
--		q->cstats.drop_len = 0;
--	}
- 	return skb;
- }
- 
diff --git a/target/linux/generic/pending-4.9/630-packet_socket_type.patch b/target/linux/generic/pending-4.9/630-packet_socket_type.patch
deleted file mode 100644
index 018d006929..0000000000
--- a/target/linux/generic/pending-4.9/630-packet_socket_type.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: add an optimization for dealing with raw sockets
-
-lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/if_packet.h |  3 +++
- net/packet/af_packet.c         | 34 +++++++++++++++++++++++++++-------
- net/packet/internal.h          |  1 +
- 3 files changed, 31 insertions(+), 7 deletions(-)
-
---- a/include/uapi/linux/if_packet.h
-+++ b/include/uapi/linux/if_packet.h
-@@ -31,6 +31,8 @@ struct sockaddr_ll {
- #define PACKET_KERNEL		7		/* To kernel space	*/
- /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
- #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
-+#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
-+
- 
- /* Packet socket options */
- 
-@@ -56,6 +58,7 @@ struct sockaddr_ll {
- #define PACKET_QDISC_BYPASS		20
- #define PACKET_ROLLOVER_STATS		21
- #define PACKET_FANOUT_DATA		22
-+#define PACKET_RECV_TYPE		23
- 
- #define PACKET_FANOUT_HASH		0
- #define PACKET_FANOUT_LB		1
---- a/net/packet/af_packet.c
-+++ b/net/packet/af_packet.c
-@@ -1780,6 +1780,7 @@ static int packet_rcv_spkt(struct sk_buf
- {
- 	struct sock *sk;
- 	struct sockaddr_pkt *spkt;
-+	struct packet_sock *po;
- 
- 	/*
- 	 *	When we registered the protocol we saved the socket in the data
-@@ -1787,6 +1788,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 */
- 
- 	sk = pt->af_packet_priv;
-+	po = pkt_sk(sk);
- 
- 	/*
- 	 *	Yank back the headers [hope the device set this
-@@ -1799,7 +1801,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 *	so that this procedure is noop.
- 	 */
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
- 		goto out;
- 
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -2037,12 +2039,12 @@ static int packet_rcv(struct sk_buff *sk
- 	unsigned int snaplen, res;
- 	bool is_drop_n_account = false;
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -2168,12 +2170,12 @@ static int tpacket_rcv(struct sk_buff *s
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -3270,6 +3272,7 @@ static int packet_create(struct net *net
- 	mutex_init(&po->pg_vec_lock);
- 	po->rollover = NULL;
- 	po->prot_hook.func = packet_rcv;
-+	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
- 
- 	if (sock->type == SOCK_PACKET)
- 		po->prot_hook.func = packet_rcv_spkt;
-@@ -3883,6 +3886,16 @@ packet_setsockopt(struct socket *sock, i
- 		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
- 		return 0;
- 	}
-+        case PACKET_RECV_TYPE:
-+        {
-+                unsigned int val;
-+                if (optlen != sizeof(val))
-+                        return -EINVAL;
-+                if (copy_from_user(&val, optval, sizeof(val)))
-+                        return -EFAULT;
-+                po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
-+                return 0;
-+        }
- 	default:
- 		return -ENOPROTOOPT;
- 	}
-@@ -3935,6 +3948,13 @@ static int packet_getsockopt(struct sock
- 	case PACKET_VNET_HDR:
- 		val = po->has_vnet_hdr;
- 		break;
-+	case PACKET_RECV_TYPE:
-+		if (len > sizeof(unsigned int))
-+			len = sizeof(unsigned int);
-+		val = po->pkt_type;
-+
-+		data = &val;
-+		break;
- 	case PACKET_VERSION:
- 		val = po->tp_version;
- 		break;
---- a/net/packet/internal.h
-+++ b/net/packet/internal.h
-@@ -128,6 +128,7 @@ struct packet_sock {
- 	struct net_device __rcu	*cached_dev;
- 	int			(*xmit)(struct sk_buff *skb);
- 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
-+	unsigned int		pkt_type;
- };
- 
- static struct packet_sock *pkt_sk(struct sock *sk)
diff --git a/target/linux/generic/pending-4.9/655-increase_skb_pad.patch b/target/linux/generic/pending-4.9/655-increase_skb_pad.patch
deleted file mode 100644
index de96d9a41d..0000000000
--- a/target/linux/generic/pending-4.9/655-increase_skb_pad.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
-
-lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/skbuff.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2303,7 +2303,7 @@ static inline int pskb_network_may_pull(
-  * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
-  */
- #ifndef NET_SKB_PAD
--#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
-+#define NET_SKB_PAD	max(64, L1_CACHE_BYTES)
- #endif
- 
- int ___pskb_trim(struct sk_buff *skb, unsigned int len);
diff --git a/target/linux/generic/pending-4.9/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-4.9/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
deleted file mode 100644
index af9a5b1914..0000000000
--- a/target/linux/generic/pending-4.9/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
+++ /dev/null
@@ -1,500 +0,0 @@
-From: Steven Barth <steven@midlink.org>
-Subject: Add support for MAP-E FMRs (mesh mode)
-
-MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
-between MAP CEs (mesh mode) without the need to forward such data to a
-border relay. This is similar to how 6rd works but for IPv4 over IPv6.
-
-Signed-off-by: Steven Barth <cyrus@openwrt.org>
----
- include/net/ip6_tunnel.h       |  13 ++
- include/uapi/linux/if_tunnel.h |  13 ++
- net/ipv6/ip6_tunnel.c          | 276 +++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 291 insertions(+), 11 deletions(-)
-
---- a/include/net/ip6_tunnel.h
-+++ b/include/net/ip6_tunnel.h
-@@ -17,6 +17,18 @@
- /* determine capability on a per-packet basis */
- #define IP6_TNL_F_CAP_PER_PACKET 0x40000
- 
-+/* IPv6 tunnel FMR */
-+struct __ip6_tnl_fmr {
-+	struct __ip6_tnl_fmr *next; /* next fmr in list */
-+	struct in6_addr ip6_prefix;
-+	struct in_addr ip4_prefix;
-+
-+	__u8 ip6_prefix_len;
-+	__u8 ip4_prefix_len;
-+	__u8 ea_len;
-+	__u8 offset;
-+};
-+
- struct __ip6_tnl_parm {
- 	char name[IFNAMSIZ];	/* name of tunnel device */
- 	int link;		/* ifindex of underlying L2 interface */
-@@ -28,6 +40,7 @@ struct __ip6_tnl_parm {
- 	__u32 flags;		/* tunnel flags */
- 	struct in6_addr laddr;	/* local tunnel end-point address */
- 	struct in6_addr raddr;	/* remote tunnel end-point address */
-+	struct __ip6_tnl_fmr *fmrs;	/* FMRs */
- 
- 	__be16			i_flags;
- 	__be16			o_flags;
---- a/include/uapi/linux/if_tunnel.h
-+++ b/include/uapi/linux/if_tunnel.h
-@@ -75,10 +75,23 @@ enum {
- 	IFLA_IPTUN_ENCAP_SPORT,
- 	IFLA_IPTUN_ENCAP_DPORT,
- 	IFLA_IPTUN_COLLECT_METADATA,
-+	IFLA_IPTUN_FMRS,
- 	__IFLA_IPTUN_MAX,
- };
- #define IFLA_IPTUN_MAX	(__IFLA_IPTUN_MAX - 1)
- 
-+enum {
-+	IFLA_IPTUN_FMR_UNSPEC,
-+	IFLA_IPTUN_FMR_IP6_PREFIX,
-+	IFLA_IPTUN_FMR_IP4_PREFIX,
-+	IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_EA_LEN,
-+	IFLA_IPTUN_FMR_OFFSET,
-+	__IFLA_IPTUN_FMR_MAX,
-+};
-+#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
-+
- enum tunnel_encap_types {
- 	TUNNEL_ENCAP_NONE,
- 	TUNNEL_ENCAP_FOU,
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -16,6 +16,8 @@
-  *      as published by the Free Software Foundation; either version
-  *      2 of the License, or (at your option) any later version.
-  *
-+ *	Changes:
-+ * Steven Barth <cyrus@openwrt.org>:		MAP-E FMR support
-  */
- 
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -72,9 +74,9 @@ static bool log_ecn_error = true;
- module_param(log_ecn_error, bool, 0644);
- MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
- 
--static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
-+static u32 HASH(const struct in6_addr *addr)
- {
--	u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
-+	u32 hash = ipv6_addr_hash(addr);
- 
- 	return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT);
- }
-@@ -141,20 +143,29 @@ static struct net_device_stats *ip6_get_
- static struct ip6_tnl *
- ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
- {
--	unsigned int hash = HASH(remote, local);
-+	unsigned int hash = HASH(local);
- 	struct ip6_tnl *t;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 	struct in6_addr any;
-+	struct __ip6_tnl_fmr *fmr;
- 
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
--		if (ipv6_addr_equal(local, &t->parms.laddr) &&
--		    ipv6_addr_equal(remote, &t->parms.raddr) &&
--		    (t->dev->flags & IFF_UP))
-+		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
-+				!(t->dev->flags & IFF_UP))
-+			continue;
-+
-+		if (ipv6_addr_equal(remote, &t->parms.raddr))
- 			return t;
-+
-+		for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+			if (ipv6_prefix_equal(remote, &fmr->ip6_prefix,
-+					fmr->ip6_prefix_len))
-+				return t;
-+		}
- 	}
- 
- 	memset(&any, 0, sizeof(any));
--	hash = HASH(&any, local);
-+	hash = HASH(local);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (ipv6_addr_equal(local, &t->parms.laddr) &&
- 		    ipv6_addr_any(&t->parms.raddr) &&
-@@ -162,7 +173,7 @@ ip6_tnl_lookup(struct net *net, const st
- 			return t;
- 	}
- 
--	hash = HASH(remote, &any);
-+	hash = HASH(&any);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (ipv6_addr_equal(remote, &t->parms.raddr) &&
- 		    ipv6_addr_any(&t->parms.laddr) &&
-@@ -202,7 +213,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
- 
- 	if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
- 		prio = 1;
--		h = HASH(remote, local);
-+		h = HASH(local);
- 	}
- 	return &ip6n->tnls[prio][h];
- }
-@@ -384,6 +395,12 @@ ip6_tnl_dev_uninit(struct net_device *de
- 	struct net *net = t->net;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+
- 	if (dev == ip6n->fb_tnl_dev)
- 		RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
- 	else
-@@ -780,6 +797,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
- }
- EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
- 
-+/**
-+ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
-+ *   @dest: destination IPv6 address buffer
-+ *   @skb: received socket buffer
-+ *   @fmr: MAP FMR
-+ *   @xmit: Calculate for xmit or rcv
-+ **/
-+static void ip4ip6_fmr_calc(struct in6_addr *dest,
-+		const struct iphdr *iph, const uint8_t *end,
-+		const struct __ip6_tnl_fmr *fmr, bool xmit)
-+{
-+	int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
-+	u8 *portp = NULL;
-+	bool use_dest_addr;
-+	const struct iphdr *dsth = iph;
-+
-+	if ((u8*)dsth >= end)
-+		return;
-+
-+	/* find significant IP header */
-+	if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+		if (ih && ((u8*)&ih[1]) <= end && (
-+			ih->type == ICMP_DEST_UNREACH ||
-+			ih->type == ICMP_SOURCE_QUENCH ||
-+			ih->type == ICMP_TIME_EXCEEDED ||
-+			ih->type == ICMP_PARAMETERPROB ||
-+			ih->type == ICMP_REDIRECT))
-+				dsth = (const struct iphdr*)&ih[1];
-+	}
-+
-+	/* in xmit-path use dest port by default and source port only if
-+		this is an ICMP reply to something else; vice versa in rcv-path */
-+	use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
-+
-+	/* get dst port */
-+	if (((u8*)&dsth[1]) <= end && (
-+		dsth->protocol == IPPROTO_UDP ||
-+		dsth->protocol == IPPROTO_TCP ||
-+		dsth->protocol == IPPROTO_SCTP ||
-+		dsth->protocol == IPPROTO_DCCP)) {
-+			/* for UDP, TCP, SCTP and DCCP source and dest port
-+			follow IPv4 header directly */
-+			portp = ((u8*)dsth) + dsth->ihl * 4;
-+
-+			if (use_dest_addr)
-+				portp += sizeof(u16);
-+	} else if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+
-+		/* use icmp identifier as port */
-+		if (((u8*)&ih) <= end && (
-+		    (use_dest_addr && (
-+		    ih->type == ICMP_ECHOREPLY ||
-+			ih->type == ICMP_TIMESTAMPREPLY ||
-+			ih->type == ICMP_INFO_REPLY ||
-+			ih->type == ICMP_ADDRESSREPLY)) ||
-+			(!use_dest_addr && (
-+			ih->type == ICMP_ECHO ||
-+			ih->type == ICMP_TIMESTAMP ||
-+			ih->type == ICMP_INFO_REQUEST ||
-+			ih->type == ICMP_ADDRESS)
-+			)))
-+				portp = (u8*)&ih->un.echo.id;
-+	}
-+
-+	if ((portp && &portp[2] <= end) || psidlen == 0) {
-+		int frombyte = fmr->ip6_prefix_len / 8;
-+		int fromrem = fmr->ip6_prefix_len % 8;
-+		int bytes = sizeof(struct in6_addr) - frombyte;
-+		const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
-+		u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
-+		u64 t = 0;
-+
-+		/* extract PSID from port and add it to eabits */
-+		u16 psidbits = 0;
-+		if (psidlen > 0) {
-+			psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
-+			psidbits >>= 16 - psidlen - fmr->offset;
-+			psidbits = (u16)(psidbits << (16 - psidlen));
-+			eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
-+		}
-+
-+		/* rewrite destination address */
-+		*dest = fmr->ip6_prefix;
-+		memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
-+		dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
-+
-+		if (bytes > sizeof(u64))
-+			bytes = sizeof(u64);
-+
-+		/* insert eabits */
-+		memcpy(&t, &dest->s6_addr[frombyte], bytes);
-+		t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
-+			<< (64 - fmr->ea_len - fromrem));
-+		t = cpu_to_be64(t | (eabits >> fromrem));
-+		memcpy(&dest->s6_addr[frombyte], &t, bytes);
-+	}
-+}
-+
-+
- static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
- 			 const struct tnl_ptk_info *tpi,
- 			 struct metadata_dst *tun_dst,
-@@ -832,6 +950,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
- 	skb_reset_network_header(skb);
- 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
- 
-+	if (tpi->proto == htons(ETH_P_IP) && tunnel->parms.fmrs &&
-+		!ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) {
-+			/* Packet didn't come from BR, so lookup FMR */
-+			struct __ip6_tnl_fmr *fmr;
-+			struct in6_addr expected = tunnel->parms.raddr;
-+			for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next)
-+				if (ipv6_prefix_equal(&ipv6h->saddr,
-+					&fmr->ip6_prefix, fmr->ip6_prefix_len))
-+						break;
-+
-+			/* Check that IPv6 matches IPv4 source to prevent spoofing */
-+			if (fmr)
-+				ip4ip6_fmr_calc(&expected, ip_hdr(skb),
-+						skb_tail_pointer(skb), fmr, false);
-+
-+			if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
-+				rcu_read_unlock();
-+				goto drop;
-+			}
-+	}
-+
- 	__skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
- 
- 	err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
-@@ -962,6 +1101,7 @@ static void init_tel_txopt(struct ipv6_t
- 	opt->ops.opt_nflen = 8;
- }
- 
-+
- /**
-  * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
-  *   @t: the outgoing tunnel device
-@@ -1300,6 +1440,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
- {
- 	struct ip6_tnl *t = netdev_priv(dev);
- 	struct ipv6hdr *ipv6h;
-+	struct __ip6_tnl_fmr *fmr;
- 	int encap_limit = -1;
- 	__u16 offset;
- 	struct flowi6 fl6;
-@@ -1362,6 +1503,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
- 			fl6.flowi6_mark = skb->mark;
- 	}
- 
-+	/* try to find matching FMR */
-+	for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+		unsigned mshift = 32 - fmr->ip4_prefix_len;
-+		if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
-+				ntohl(ip_hdr(skb)->daddr) >> mshift)
-+			break;
-+	}
-+
-+	/* change dstaddr according to FMR */
-+	if (fmr)
-+		ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true);
-+
- 	if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
- 		return -1;
- 
-@@ -1489,6 +1642,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
- 	t->parms.flowinfo = p->flowinfo;
- 	t->parms.link = p->link;
- 	t->parms.proto = p->proto;
-+
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+	t->parms.fmrs = p->fmrs;
-+
- 	dst_cache_reset(&t->dst_cache);
- 	ip6_tnl_link_config(t);
- 	return 0;
-@@ -1527,6 +1688,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
- 	p->flowinfo = u->flowinfo;
- 	p->link = u->link;
- 	p->proto = u->proto;
-+	p->fmrs = NULL;
- 	memcpy(p->name, u->name, sizeof(u->name));
- }
- 
-@@ -1904,6 +2066,15 @@ static int ip6_tnl_validate(struct nlatt
- 	return 0;
- }
- 
-+static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
-+	[IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
-+	[IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
-+};
-+
- static void ip6_tnl_netlink_parms(struct nlattr *data[],
- 				  struct __ip6_tnl_parm *parms)
- {
-@@ -1938,6 +2109,46 @@ static void ip6_tnl_netlink_parms(struct
- 
- 	if (data[IFLA_IPTUN_COLLECT_METADATA])
- 		parms->collect_md = true;
-+
-+	if (data[IFLA_IPTUN_FMRS]) {
-+		unsigned rem;
-+		struct nlattr *fmr;
-+		nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
-+			struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
-+			struct __ip6_tnl_fmr *nfmr;
-+
-+			nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
-+				fmr, ip6_tnl_fmr_policy);
-+
-+			if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
-+				continue;
-+
-+			nfmr->offset = 6;
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
-+				nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
-+					sizeof(nfmr->ip6_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
-+				nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
-+					sizeof(nfmr->ip4_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
-+				nfmr->ip6_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
-+				nfmr->ip4_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
-+				nfmr->ea_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
-+				nfmr->offset = nla_get_u8(c);
-+
-+			nfmr->next = parms->fmrs;
-+			parms->fmrs = nfmr;
-+		}
-+	}
- }
- 
- static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2051,6 +2262,12 @@ static void ip6_tnl_dellink(struct net_d
- 
- static size_t ip6_tnl_get_size(const struct net_device *dev)
- {
-+	const struct ip6_tnl *t = netdev_priv(dev);
-+	struct __ip6_tnl_fmr *c;
-+	int fmrs = 0;
-+	for (c = t->parms.fmrs; c; c = c->next)
-+		++fmrs;
-+
- 	return
- 		/* IFLA_IPTUN_LINK */
- 		nla_total_size(4) +
-@@ -2078,6 +2295,24 @@ static size_t ip6_tnl_get_size(const str
- 		nla_total_size(2) +
- 		/* IFLA_IPTUN_COLLECT_METADATA */
- 		nla_total_size(0) +
-+		/* IFLA_IPTUN_FMRS */
-+		nla_total_size(0) +
-+		(
-+			/* nest */
-+			nla_total_size(0) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX */
-+			nla_total_size(sizeof(struct in6_addr)) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX */
-+			nla_total_size(sizeof(struct in_addr)) +
-+			/* IFLA_IPTUN_FMR_EA_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_OFFSET */
-+			nla_total_size(1)
-+		) * fmrs +
- 		0;
- }
- 
-@@ -2085,6 +2320,9 @@ static int ip6_tnl_fill_info(struct sk_b
- {
- 	struct ip6_tnl *tunnel = netdev_priv(dev);
- 	struct __ip6_tnl_parm *parm = &tunnel->parms;
-+	struct __ip6_tnl_fmr *c;
-+	int fmrcnt = 0;
-+	struct nlattr *fmrs;
- 
- 	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
- 	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2093,9 +2331,27 @@ static int ip6_tnl_fill_info(struct sk_b
- 	    nla_put_u8(skb, IFLA_IPTUN_ENCAP_LIMIT, parm->encap_limit) ||
- 	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
- 	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
--	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto))
-+	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
-+	    !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
- 		goto nla_put_failure;
- 
-+	for (c = parm->fmrs; c; c = c->next) {
-+		struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
-+		if (!fmr ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
-+				sizeof(c->ip6_prefix), &c->ip6_prefix) ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
-+				sizeof(c->ip4_prefix), &c->ip4_prefix) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
-+				goto nla_put_failure;
-+
-+		nla_nest_end(skb, fmr);
-+	}
-+	nla_nest_end(skb, fmrs);
-+
- 	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2133,6 +2389,7 @@ static const struct nla_policy ip6_tnl_p
- 	[IFLA_IPTUN_ENCAP_SPORT]	= { .type = NLA_U16 },
- 	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
- 	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },
-+	[IFLA_IPTUN_FMRS]		= { .type = NLA_NESTED },
- };
- 
- static struct rtnl_link_ops ip6_link_ops __read_mostly = {
diff --git a/target/linux/generic/pending-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
deleted file mode 100644
index 3f6b406cf2..0000000000
--- a/target/linux/generic/pending-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++ /dev/null
@@ -1,255 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: ipv6: allow rejecting with "source address failed policy"
-
-RFC6204 L-14 requires rejecting traffic from invalid addresses with
-ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
-egress policy) on the LAN side, so add an appropriate rule for that.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/net/netns/ipv6.h       |  1 +
- include/uapi/linux/fib_rules.h |  4 +++
- include/uapi/linux/rtnetlink.h |  1 +
- net/ipv4/fib_semantics.c       |  4 +++
- net/ipv4/fib_trie.c            |  1 +
- net/ipv4/ipmr.c                |  1 +
- net/ipv6/fib6_rules.c          |  4 +++
- net/ipv6/ip6mr.c               |  2 ++
- net/ipv6/route.c               | 58 +++++++++++++++++++++++++++++++++++++++++-
- 9 files changed, 75 insertions(+), 1 deletion(-)
-
---- a/include/net/netns/ipv6.h
-+++ b/include/net/netns/ipv6.h
-@@ -66,6 +66,7 @@ struct netns_ipv6 {
- 	unsigned long		 ip6_rt_last_gc;
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	struct rt6_info         *ip6_prohibit_entry;
-+	struct rt6_info		*ip6_policy_failed_entry;
- 	struct rt6_info         *ip6_blk_hole_entry;
- 	struct fib6_table       *fib6_local_tbl;
- 	struct fib_rules_ops    *fib6_rules_ops;
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -66,6 +66,10 @@ enum {
- 	FR_ACT_BLACKHOLE,	/* Drop without notification */
- 	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
- 	FR_ACT_PROHIBIT,	/* Drop with EACCES */
-+	FR_ACT_RES9,
-+	FR_ACT_RES10,
-+	FR_ACT_RES11,
-+	FR_ACT_POLICY_FAILED,	/* Drop with EACCES */
- 	__FR_ACT_MAX,
- };
- 
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -215,6 +215,7 @@ enum {
- 	RTN_THROW,		/* Not in this table		*/
- 	RTN_NAT,		/* Translate this address	*/
- 	RTN_XRESOLVE,		/* Use external resolver	*/
-+	RTN_POLICY_FAILED,	/* Failed ingress/egress policy */
- 	__RTN_MAX
- };
- 
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -138,6 +138,10 @@ const struct fib_prop fib_props[RTN_MAX
- 		.error	= -EINVAL,
- 		.scope	= RT_SCOPE_NOWHERE,
- 	},
-+	[RTN_POLICY_FAILED] = {
-+		.error	= -EACCES,
-+		.scope	= RT_SCOPE_UNIVERSE,
-+	},
- };
- 
- static void rt_fibinfo_free(struct rtable __rcu **rtp)
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2406,6 +2406,7 @@ static const char *const rtn_type_names[
- 	[RTN_THROW] = "THROW",
- 	[RTN_NAT] = "NAT",
- 	[RTN_XRESOLVE] = "XRESOLVE",
-+	[RTN_POLICY_FAILED] = "POLICY_FAILED",
- };
- 
- static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
---- a/net/ipv4/ipmr.c
-+++ b/net/ipv4/ipmr.c
-@@ -159,6 +159,7 @@ static int ipmr_rule_action(struct fib_r
- 	case FR_ACT_UNREACHABLE:
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
-+	case FR_ACT_POLICY_FAILED:
- 		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
---- a/net/ipv6/fib6_rules.c
-+++ b/net/ipv6/fib6_rules.c
-@@ -77,6 +77,10 @@ static int fib6_rule_action(struct fib_r
- 		err = -EACCES;
- 		rt = net->ipv6.ip6_prohibit_entry;
- 		goto discard_pkt;
-+	case FR_ACT_POLICY_FAILED:
-+		err = -EACCES;
-+		rt = net->ipv6.ip6_policy_failed_entry;
-+		goto discard_pkt;
- 	}
- 
- 	tb_id = fib_rule_get_table(rule, arg);
---- a/net/ipv6/ip6mr.c
-+++ b/net/ipv6/ip6mr.c
-@@ -169,6 +169,8 @@ static int ip6mr_rule_action(struct fib_
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
- 		return -EACCES;
-+	case FR_ACT_POLICY_FAILED:
-+		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
- 		return -EINVAL;
---- a/net/ipv6/route.c
-+++ b/net/ipv6/route.c
-@@ -91,6 +91,8 @@ static int		ip6_pkt_discard(struct sk_bu
- static int		ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static int		ip6_pkt_prohibit(struct sk_buff *skb);
- static int		ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed(struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static void		ip6_link_failure(struct sk_buff *skb);
- static void		ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- 					   struct sk_buff *skb, u32 mtu);
-@@ -300,6 +302,21 @@ static const struct rt6_info ip6_prohibi
- 	.rt6i_ref	= ATOMIC_INIT(1),
- };
- 
-+static const struct rt6_info ip6_policy_failed_entry_template = {
-+	.dst = {
-+		.__refcnt	= ATOMIC_INIT(1),
-+		.__use		= 1,
-+		.obsolete	= DST_OBSOLETE_FORCE_CHK,
-+		.error		= -EACCES,
-+		.input		= ip6_pkt_policy_failed,
-+		.output		= ip6_pkt_policy_failed_out,
-+	},
-+	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
-+	.rt6i_protocol	= RTPROT_KERNEL,
-+	.rt6i_metric	= ~(u32) 0,
-+	.rt6i_ref	= ATOMIC_INIT(1),
-+};
-+
- static const struct rt6_info ip6_blk_hole_entry_template = {
- 	.dst = {
- 		.__refcnt	= ATOMIC_INIT(1),
-@@ -1970,6 +1987,11 @@ static struct rt6_info *ip6_route_info_c
- 			rt->dst.output = ip6_pkt_prohibit_out;
- 			rt->dst.input = ip6_pkt_prohibit;
- 			break;
-+		case RTN_POLICY_FAILED:
-+			rt->dst.error = -EACCES;
-+			rt->dst.output = ip6_pkt_policy_failed_out;
-+			rt->dst.input = ip6_pkt_policy_failed;
-+			break;
- 		case RTN_THROW:
- 		case RTN_UNREACHABLE:
- 		default:
-@@ -2613,6 +2635,17 @@ static int ip6_pkt_prohibit_out(struct n
- 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
- }
- 
-+static int ip6_pkt_policy_failed(struct sk_buff *skb)
-+{
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
-+}
-+
-+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb)
-+{
-+	skb->dev = skb_dst(skb)->dev;
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
-+}
-+
- /*
-  *	Allocate a dst for local (unicast / anycast) address.
-  */
-@@ -2850,7 +2883,8 @@ static int rtm_to_fib6_config(struct sk_
- 	if (rtm->rtm_type == RTN_UNREACHABLE ||
- 	    rtm->rtm_type == RTN_BLACKHOLE ||
- 	    rtm->rtm_type == RTN_PROHIBIT ||
--	    rtm->rtm_type == RTN_THROW)
-+	    rtm->rtm_type == RTN_THROW ||
-+	    rtm->rtm_type == RTN_POLICY_FAILED)
- 		cfg->fc_flags |= RTF_REJECT;
- 
- 	if (rtm->rtm_type == RTN_LOCAL)
-@@ -3222,6 +3256,9 @@ static int rt6_fill_node(struct net *net
- 		case -EACCES:
- 			rtm->rtm_type = RTN_PROHIBIT;
- 			break;
-+		case -EPERM:
-+			rtm->rtm_type = RTN_POLICY_FAILED;
-+			break;
- 		case -EAGAIN:
- 			rtm->rtm_type = RTN_THROW;
- 			break;
-@@ -3498,6 +3535,8 @@ static int ip6_route_dev_notify(struct n
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
- 		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
-+		net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
-+		net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
- 		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
- 		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
- #endif
-@@ -3509,6 +3548,7 @@ static int ip6_route_dev_notify(struct n
- 		in6_dev_put(net->ipv6.ip6_null_entry->rt6i_idev);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		in6_dev_put(net->ipv6.ip6_prohibit_entry->rt6i_idev);
-+		in6_dev_put(net->ipv6.ip6_policy_failed_entry->rt6i_idev);
- 		in6_dev_put(net->ipv6.ip6_blk_hole_entry->rt6i_idev);
- #endif
- 	}
-@@ -3724,6 +3764,17 @@ static int __net_init ip6_route_net_init
- 	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
- 	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
- 			 ip6_template_metrics, true);
-+
-+	net->ipv6.ip6_policy_failed_entry =
-+		kmemdup(&ip6_policy_failed_entry_template,
-+			sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
-+	if (!net->ipv6.ip6_policy_failed_entry)
-+		goto out_ip6_blk_hole_entry;
-+	net->ipv6.ip6_policy_failed_entry->dst.path =
-+		(struct dst_entry *)net->ipv6.ip6_policy_failed_entry;
-+	net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
-+	dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
-+			 ip6_template_metrics, true);
- #endif
- 
- 	net->ipv6.sysctl.flush_delay = 0;
-@@ -3742,6 +3793,8 @@ out:
- 	return ret;
- 
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
-+out_ip6_blk_hole_entry:
-+	kfree(net->ipv6.ip6_blk_hole_entry);
- out_ip6_prohibit_entry:
- 	kfree(net->ipv6.ip6_prohibit_entry);
- out_ip6_null_entry:
-@@ -3759,6 +3812,7 @@ static void __net_exit ip6_route_net_exi
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	kfree(net->ipv6.ip6_prohibit_entry);
- 	kfree(net->ipv6.ip6_blk_hole_entry);
-+	kfree(net->ipv6.ip6_policy_failed_entry);
- #endif
- 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
- }
-@@ -3832,6 +3886,9 @@ void __init ip6_route_init_special_entri
- 	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
- 	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
- 	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
-+	init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
-+	init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
-+		in6_dev_get(init_net.loopback_dev);
-   #endif
- }
- 
diff --git a/target/linux/generic/pending-4.9/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-4.9/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
deleted file mode 100644
index cd627667d3..0000000000
--- a/target/linux/generic/pending-4.9/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: net: provide defines for _POLICY_FAILED until all code is updated
-
-Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
-unreachable, conflicting with our name.
-
-Add appropriate defines to allow our code to build with the new
-name until we have updated our local patches for older kernels
-and userspace packages.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/uapi/linux/fib_rules.h | 2 ++
- include/uapi/linux/icmpv6.h    | 2 ++
- include/uapi/linux/rtnetlink.h | 2 ++
- 3 files changed, 6 insertions(+)
-
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -73,6 +73,8 @@ enum {
- 	__FR_ACT_MAX,
- };
- 
-+#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
-+
- #define FR_ACT_MAX (__FR_ACT_MAX - 1)
- 
- #endif
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -118,6 +118,8 @@ struct icmp6hdr {
- #define ICMPV6_POLICY_FAIL		5
- #define ICMPV6_REJECT_ROUTE		6
- 
-+#define ICMPV6_FAILED_POLICY		ICMPV6_POLICY_FAIL
-+
- /*
-  *	Codes for Time Exceeded
-  */
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -219,6 +219,8 @@ enum {
- 	__RTN_MAX
- };
- 
-+#define RTN_FAILED_POLICY RTN_POLICY_FAILED
-+
- #define RTN_MAX (__RTN_MAX - 1)
- 
- 
diff --git a/target/linux/generic/pending-4.9/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-4.9/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
deleted file mode 100644
index d113be6439..0000000000
--- a/target/linux/generic/pending-4.9/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
+++ /dev/null
@@ -1,154 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h |  2 ++
- include/linux/skbuff.h    |  3 ++-
- net/core/dev.c            | 48 +++++++++++++++++++++++++++++++++++++++++++++++
- net/ethernet/eth.c        | 18 +++++++++++++++++-
- 4 files changed, 69 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1752,6 +1752,8 @@ struct net_device {
- 	struct netdev_hw_addr_list	mc;
- 	struct netdev_hw_addr_list	dev_addrs;
- 
-+	unsigned char		local_addr_mask[MAX_ADDR_LEN];
-+
- #ifdef CONFIG_SYSFS
- 	struct kset		*queues_kset;
- #endif
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -747,7 +747,8 @@ struct sk_buff {
- #ifdef CONFIG_NET_SWITCHDEV
- 	__u8			offload_fwd_mark:1;
- #endif
--	/* 2, 4 or 5 bit hole */
-+	__u8			gro_skip:1;
-+	/* 1, 3 or 4 bit hole */
- 
- #ifdef CONFIG_NET_SCHED
- 	__u16			tc_index;	/* traffic control index */
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -4572,6 +4572,9 @@ static enum gro_result dev_gro_receive(s
- 	enum gro_result ret;
- 	int grow;
- 
-+	if (skb->gro_skip)
-+		goto normal;
-+
- 	if (!(skb->dev->features & NETIF_F_GRO))
- 		goto normal;
- 
-@@ -5864,6 +5867,48 @@ static void __netdev_adjacent_dev_unlink
- 					   &upper_dev->adj_list.lower);
- }
- 
-+static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr,
-+			       struct net_device *dev)
-+{
-+	int i;
-+
-+	for (i = 0; i < dev->addr_len; i++)
-+		mask[i] |= addr[i] ^ dev->dev_addr[i];
-+}
-+
-+static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev,
-+				struct net_device *lower)
-+{
-+	struct net_device *cur;
-+	struct list_head *iter;
-+
-+	netdev_for_each_upper_dev_rcu(dev, cur, iter) {
-+		__netdev_addr_mask(mask, cur->dev_addr, lower);
-+		__netdev_upper_mask(mask, cur, lower);
-+	}
-+}
-+
-+static void __netdev_update_addr_mask(struct net_device *dev)
-+{
-+	unsigned char mask[MAX_ADDR_LEN];
-+	struct net_device *cur;
-+	struct list_head *iter;
-+
-+	memset(mask, 0, sizeof(mask));
-+	__netdev_upper_mask(mask, dev, dev);
-+	memcpy(dev->local_addr_mask, mask, dev->addr_len);
-+
-+	netdev_for_each_lower_dev(dev, cur, iter)
-+		__netdev_update_addr_mask(cur);
-+}
-+
-+static void netdev_update_addr_mask(struct net_device *dev)
-+{
-+	rcu_read_lock();
-+	__netdev_update_addr_mask(dev);
-+	rcu_read_unlock();
-+}
-+
- static int __netdev_upper_dev_link(struct net_device *dev,
- 				   struct net_device *upper_dev, bool master,
- 				   void *upper_priv, void *upper_info)
-@@ -5936,6 +5981,7 @@ static int __netdev_upper_dev_link(struc
- 			goto rollback_lower_mesh;
- 	}
- 
-+	netdev_update_addr_mask(dev);
- 	ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev,
- 					    &changeupper_info.info);
- 	ret = notifier_to_errno(ret);
-@@ -6062,6 +6108,7 @@ void netdev_upper_dev_unlink(struct net_
- 	list_for_each_entry(i, &upper_dev->all_adj_list.upper, list)
- 		__netdev_adjacent_dev_unlink(dev, i->dev, i->ref_nr);
- 
-+	netdev_update_addr_mask(dev);
- 	call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev,
- 				      &changeupper_info.info);
- }
-@@ -6664,6 +6711,7 @@ int dev_set_mac_address(struct net_devic
- 	if (err)
- 		return err;
- 	dev->addr_assign_type = NET_ADDR_SET;
-+	netdev_update_addr_mask(dev);
- 	call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- 	add_device_randomness(dev->dev_addr, dev->addr_len);
- 	return 0;
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -143,6 +143,18 @@ u32 eth_get_headlen(void *data, unsigned
- }
- EXPORT_SYMBOL(eth_get_headlen);
- 
-+static inline bool
-+eth_check_local_mask(const void *addr1, const void *addr2, const void *mask)
-+{
-+	const u16 *a1 = addr1;
-+	const u16 *a2 = addr2;
-+	const u16 *m = mask;
-+
-+	return (((a1[0] ^ a2[0]) & ~m[0]) |
-+		((a1[1] ^ a2[1]) & ~m[1]) |
-+		((a1[2] ^ a2[2]) & ~m[2]));
-+}
-+
- /**
-  * eth_type_trans - determine the packet's protocol ID.
-  * @skb: received socket data
-@@ -171,8 +183,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- 			skb->pkt_type = PACKET_MULTICAST;
- 	}
- 	else if (unlikely(!ether_addr_equal_64bits(eth->h_dest,
--						   dev->dev_addr)))
-+						   dev->dev_addr))) {
- 		skb->pkt_type = PACKET_OTHERHOST;
-+		if (eth_check_local_mask(eth->h_dest, dev->dev_addr,
-+					 dev->local_addr_mask))
-+			skb->gro_skip = 1;
-+	}
- 
- 	/*
- 	 * Some variants of DSA tagging don't have an ethertype field
diff --git a/target/linux/generic/pending-4.9/681-NET-add-of_get_mac_address_mtd.patch b/target/linux/generic/pending-4.9/681-NET-add-of_get_mac_address_mtd.patch
deleted file mode 100644
index b29b5f11b0..0000000000
--- a/target/linux/generic/pending-4.9/681-NET-add-of_get_mac_address_mtd.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From: John Crispin <blogic@openwrt.org>
-Subject: NET: add mtd-mac-address support to of_get_mac_address()
-
-Many embedded devices have information such as mac addresses stored inside mtd
-devices. This patch allows us to add a property inside a node describing a
-network interface. The new property points at a mtd partition with an offset
-where the mac address can be found.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/of/of_net.c    |   37 +++++++++++++++++++++++++++++++++++++
- include/linux/of_net.h |    1 +
- 2 files changed, 38 insertions(+)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -10,6 +10,7 @@
- #include <linux/of_net.h>
- #include <linux/phy.h>
- #include <linux/export.h>
-+#include <linux/mtd/mtd.h>
- 
- /**
-  * of_get_phy_mode - Get phy mode for given device_node
-@@ -38,7 +39,7 @@ int of_get_phy_mode(struct device_node *
- }
- EXPORT_SYMBOL_GPL(of_get_phy_mode);
- 
--static const void *of_get_mac_addr(struct device_node *np, const char *name)
-+static void *of_get_mac_addr(struct device_node *np, const char *name)
- {
- 	struct property *pp = of_find_property(np, name, NULL);
- 
-@@ -47,6 +48,73 @@ static const void *of_get_mac_addr(struc
- 	return NULL;
- }
- 
-+static const void *of_get_mac_address_mtd(struct device_node *np)
-+{
-+#ifdef CONFIG_MTD
-+	struct device_node *mtd_np = NULL;
-+	struct property *prop;
-+	size_t retlen;
-+	int size, ret;
-+	struct mtd_info *mtd;
-+	const char *part;
-+	const __be32 *list;
-+	phandle phandle;
-+	u32 mac_inc = 0;
-+	u8 mac[ETH_ALEN];
-+	void *addr;
-+
-+	list = of_get_property(np, "mtd-mac-address", &size);
-+	if (!list || (size != (2 * sizeof(*list))))
-+		return NULL;
-+
-+	phandle = be32_to_cpup(list++);
-+	if (phandle)
-+		mtd_np = of_find_node_by_phandle(phandle);
-+
-+	if (!mtd_np)
-+		return NULL;
-+
-+	part = of_get_property(mtd_np, "label", NULL);
-+	if (!part)
-+		part = mtd_np->name;
-+
-+	mtd = get_mtd_device_nm(part);
-+	if (IS_ERR(mtd))
-+		return NULL;
-+
-+	ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, mac);
-+	put_mtd_device(mtd);
-+
-+	if (!of_property_read_u32(np, "mtd-mac-address-increment", &mac_inc))
-+		mac[5] += mac_inc;
-+
-+	if (!is_valid_ether_addr(mac))
-+		return NULL;
-+
-+	addr = of_get_mac_addr(np, "mac-address");
-+	if (addr) {
-+		memcpy(addr, mac, ETH_ALEN);
-+		return addr;
-+	}
-+
-+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-+	if (!prop)
-+		return NULL;
-+
-+	prop->name = "mac-address";
-+	prop->length = ETH_ALEN;
-+	prop->value = kmemdup(mac, ETH_ALEN, GFP_KERNEL);
-+	if (!prop->value || of_add_property(np, prop))
-+		goto free;
-+
-+	return prop->value;
-+free:
-+	kfree(prop->value);
-+	kfree(prop);
-+#endif
-+	return NULL;
-+}
-+
- /**
-  * Search the device tree for the best MAC address to use.  'mac-address' is
-  * checked first, because that is supposed to contain to "most recent" MAC
-@@ -64,11 +132,18 @@ static const void *of_get_mac_addr(struc
-  * addresses.  Some older U-Boots only initialized 'local-mac-address'.  In
-  * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
-  * but is all zeros.
-+ *
-+ * If a mtd-mac-address property exists, try to fetch the MAC address from the
-+ * specified mtd device, and store it as a 'mac-address' property
- */
- const void *of_get_mac_address(struct device_node *np)
- {
- 	const void *addr;
- 
-+	addr = of_get_mac_address_mtd(np);
-+	if (addr)
-+		return addr;
-+
- 	addr = of_get_mac_addr(np, "mac-address");
- 	if (addr)
- 		return addr;
diff --git a/target/linux/generic/pending-4.9/701-phy_extension.patch b/target/linux/generic/pending-4.9/701-phy_extension.patch
deleted file mode 100644
index 628e1d31b9..0000000000
--- a/target/linux/generic/pending-4.9/701-phy_extension.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: net: phy: add phy_ethtool_ioctl()
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/net/phy/phy.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
- include/linux/phy.h   |  1 +
- 2 files changed, 45 insertions(+)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -472,6 +472,50 @@ int phy_ethtool_ksettings_get(struct phy
- }
- EXPORT_SYMBOL(phy_ethtool_ksettings_get);
- 
-+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
-+{
-+	u32 cmd;
-+	int tmp;
-+	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
-+	struct ethtool_value edata = { ETHTOOL_GLINK };
-+
-+	if (get_user(cmd, (u32 *) useraddr))
-+		return -EFAULT;
-+
-+	switch (cmd) {
-+	case ETHTOOL_GSET:
-+		phy_ethtool_gset(phydev, &ecmd);
-+		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
-+			return -EFAULT;
-+		return 0;
-+
-+	case ETHTOOL_SSET:
-+		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
-+			return -EFAULT;
-+		return phy_ethtool_sset(phydev, &ecmd);
-+
-+	case ETHTOOL_NWAY_RST:
-+		/* if autoneg is off, it's an error */
-+		tmp = phy_read(phydev, MII_BMCR);
-+		if (tmp & BMCR_ANENABLE) {
-+			tmp |= (BMCR_ANRESTART);
-+			phy_write(phydev, MII_BMCR, tmp);
-+			return 0;
-+		}
-+		return -EINVAL;
-+
-+	case ETHTOOL_GLINK:
-+		edata.data = (phy_read(phydev,
-+				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
-+		if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+			return -EFAULT;
-+		return 0;
-+	}
-+
-+	return -EOPNOTSUPP;
-+}
-+EXPORT_SYMBOL(phy_ethtool_ioctl);
-+
- /**
-  * phy_mii_ioctl - generic PHY MII ioctl interface
-  * @phydev: the phy_device struct
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -827,6 +827,7 @@ int phy_ethtool_ksettings_get(struct phy
- 			      struct ethtool_link_ksettings *cmd);
- int phy_ethtool_ksettings_set(struct phy_device *phydev,
- 			      const struct ethtool_link_ksettings *cmd);
-+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
- int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
- int phy_start_interrupts(struct phy_device *phydev);
- void phy_print_status(struct phy_device *phydev);
diff --git a/target/linux/generic/pending-4.9/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-4.9/703-phy-add-detach-callback-to-struct-phy_driver.patch
deleted file mode 100644
index 5c7ae72bcb..0000000000
--- a/target/linux/generic/pending-4.9/703-phy-add-detach-callback-to-struct-phy_driver.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: generic: add detach callback to struct phy_driver
-
-lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/phy_device.c | 3 +++
- include/linux/phy.h          | 6 ++++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -998,6 +998,9 @@ void phy_detach(struct phy_device *phyde
- 	struct mii_bus *bus;
- 	int i;
- 
-+	if (phydev->drv && phydev->drv->detach)
-+		phydev->drv->detach(phydev);
-+
- 	phydev->attached_dev->phydev = NULL;
- 	phydev->attached_dev = NULL;
- 	phy_suspend(phydev);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -507,6 +507,12 @@ struct phy_driver {
- 	 */
- 	int (*did_interrupt)(struct phy_device *phydev);
- 
-+	/*
-+	 * Called before an ethernet device is detached
-+	 * from the PHY.
-+	 */
-+	void (*detach)(struct phy_device *phydev);
-+
- 	/* Clears up any memory if needed */
- 	void (*remove)(struct phy_device *phydev);
- 
diff --git a/target/linux/generic/pending-4.9/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.9/734-net-phy-at803x-allow-to-configure-via-pdata.patch
deleted file mode 100644
index 69b21be951..0000000000
--- a/target/linux/generic/pending-4.9/734-net-phy-at803x-allow-to-configure-via-pdata.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: net: phy: allow to configure AR803x PHYs via platform data
-
-Add a patch for the at803x phy driver, in order to be able
-to configure some register settings via platform data.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/at803x.c                 | 56 ++++++++++++++++++++++++++++++++
- include/linux/platform_data/phy-at803x.h | 11 +++++++
- 2 files changed, 67 insertions(+)
- create mode 100644 include/linux/platform_data/phy-at803x.h
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -12,12 +12,14 @@
-  */
- 
- #include <linux/phy.h>
-+#include <linux/mdio.h>
- #include <linux/module.h>
- #include <linux/string.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
- #include <linux/of_gpio.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/platform_data/phy-at803x.h>
- 
- #define AT803X_INTR_ENABLE			0x12
- #define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
-@@ -45,6 +47,11 @@
- #define AT803X_REG_CHIP_CONFIG			0x1f
- #define AT803X_BT_BX_REG_SEL			0x8000
- 
-+#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
-+#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
-+
- #define AT803X_DEBUG_ADDR			0x1D
- #define AT803X_DEBUG_DATA			0x1E
- 
-@@ -72,6 +79,7 @@ MODULE_LICENSE("GPL");
- struct at803x_priv {
- 	bool phy_reset:1;
- 	struct gpio_desc *gpiod_reset;
-+	int prev_speed;
- };
- 
- struct at803x_context {
-@@ -276,8 +284,16 @@ does_not_require_reset_workaround:
- 	return 0;
- }
- 
-+static void at803x_disable_smarteee(struct phy_device *phydev)
-+{
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
-+		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
-+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-+}
-+
- static int at803x_config_init(struct phy_device *phydev)
- {
-+	struct at803x_platform_data *pdata;
- 	int ret;
- 
- 	ret = genphy_config_init(phydev);
-@@ -298,6 +314,26 @@ static int at803x_config_init(struct phy
- 			return ret;
- 	}
- 
-+	pdata = dev_get_platdata(&phydev->mdio.dev);
-+	if (pdata) {
-+		if (pdata->disable_smarteee)
-+			at803x_disable_smarteee(phydev);
-+
-+		if (pdata->enable_rgmii_rx_delay)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
-+				AT803X_DEBUG_RX_CLK_DLY_EN);
-+		else
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+				AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-+
-+		if (pdata->enable_rgmii_tx_delay)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-+				AT803X_DEBUG_TX_CLK_DLY_EN);
-+		else
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+	}
-+
- 	return 0;
- }
- 
-@@ -335,6 +371,8 @@ static int at803x_config_intr(struct phy
- static void at803x_link_change_notify(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-+	struct at803x_platform_data *pdata;
-+	pdata = dev_get_platdata(&phydev->mdio.dev);
- 
- 	/*
- 	 * Conduct a hardware reset for AT8030/2 every time a link loss is
-@@ -363,6 +401,24 @@ static void at803x_link_change_notify(st
- 	} else {
- 		priv->phy_reset = false;
- 	}
-+	if (pdata && pdata->fixup_rgmii_tx_delay &&
-+	    phydev->speed != priv->prev_speed) {
-+		switch (phydev->speed) {
-+		case SPEED_10:
-+		case SPEED_100:
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-+				AT803X_DEBUG_TX_CLK_DLY_EN);
-+			break;
-+		case SPEED_1000:
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		priv->prev_speed = phydev->speed;
-+	}
- }
- 
- static int at803x_aneg_done(struct phy_device *phydev)
---- /dev/null
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -0,0 +1,11 @@
-+#ifndef _PHY_AT803X_PDATA_H
-+#define _PHY_AT803X_PDATA_H
-+
-+struct at803x_platform_data {
-+	int disable_smarteee:1;
-+	int enable_rgmii_tx_delay:1;
-+	int enable_rgmii_rx_delay:1;
-+	int fixup_rgmii_tx_delay:1;
-+};
-+
-+#endif /* _PHY_AT803X_PDATA_H */
diff --git a/target/linux/generic/pending-4.9/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/pending-4.9/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
deleted file mode 100644
index 381b2d09fa..0000000000
--- a/target/linux/generic/pending-4.9/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Roman Yeryomin <roman@advem.lv>
-Subject: kernel: add at803x fix for sgmii mode
-
-Some (possibly broken) bootloaders incorreclty initialize at8033
-phy. This patch enables sgmii autonegotiation mode.
-
-[john@phrozen.org: felix added this to his upstream queue]
-
-Signed-off-by: Roman Yeryomin <roman@advem.lv>
----
- drivers/net/phy/at803x.c | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -46,6 +46,7 @@
- #define AT803X_FUNC_DATA			0x4003
- #define AT803X_REG_CHIP_CONFIG			0x1f
- #define AT803X_BT_BX_REG_SEL			0x8000
-+#define AT803X_SGMII_ANEG_EN			0x1000
- 
- #define AT803X_PCS_SMART_EEE_CTRL3			0x805D
- #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
-@@ -295,6 +296,27 @@ static int at803x_config_init(struct phy
- {
- 	struct at803x_platform_data *pdata;
- 	int ret;
-+	u32 v;
-+
-+	if (phydev->drv->phy_id == ATH8031_PHY_ID &&
-+		phydev->interface == PHY_INTERFACE_MODE_SGMII)
-+	{
-+		v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+		/* select SGMII/fiber page */
-+		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+						v & ~AT803X_BT_BX_REG_SEL);
-+		if (ret)
-+			return ret;
-+		/* enable SGMII autonegotiation */
-+		ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
-+		if (ret)
-+			return ret;
-+		/* select copper page */
-+		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+						v | AT803X_BT_BX_REG_SEL);
-+		if (ret)
-+			return ret;
-+	}
- 
- 	ret = genphy_config_init(phydev);
- 	if (ret < 0)
diff --git a/target/linux/generic/pending-4.9/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-4.9/810-pci_disable_common_quirks.patch
deleted file mode 100644
index 6130ac86a9..0000000000
--- a/target/linux/generic/pending-4.9/810-pci_disable_common_quirks.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: debloat: add kernel config option to disabling common PCI quirks
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/pci/Kconfig  | 6 ++++++
- drivers/pci/quirks.c | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -71,6 +71,12 @@ config XEN_PCIDEV_FRONTEND
-           The PCI device frontend driver allows the kernel to import arbitrary
-           PCI devices from a PCI backend to support PCI driver domains.
- 
-+config PCI_DISABLE_COMMON_QUIRKS
-+	bool "PCI disable common quirks"
-+	depends on PCI
-+	help
-+	  If you don't know what to do here, say N.
-+
- config HT_IRQ
- 	bool "Interrupts on hypertransport devices"
- 	default y
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -41,6 +41,7 @@ static void quirk_mmio_always_on(struct
- DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
- 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* The Mellanox Tavor device gives false positive parity errors
-  * Mark this device with a broken_parity_status, to allow
-  * PCI scanning code to "skip" this now blacklisted device.
-@@ -3055,6 +3056,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
- 
- /*
-  * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.  To
-@@ -3111,6 +3113,8 @@ static void fixup_debug_report(struct pc
- 	}
- }
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- /*
-  * Some BIOS implementations leave the Intel GPU interrupts enabled,
-  * even though no one is handling them (f.e. i915 driver is never loaded).
-@@ -3149,6 +3153,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * PCI devices which are on Intel chips can skip the 10ms delay
-  * before entering D3 mode.
diff --git a/target/linux/generic/pending-4.9/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-4.9/811-pci_disable_usb_common_quirks.patch
deleted file mode 100644
index 9dbb2ca8cd..0000000000
--- a/target/linux/generic/pending-4.9/811-pci_disable_usb_common_quirks.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: debloat: disable common USB quirks
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
- drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++-
- include/linux/usb/hcd.h       |  7 +++++++
- 3 files changed, 40 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/pci-quirks.c
-+++ b/drivers/usb/host/pci-quirks.c
-@@ -107,6 +107,8 @@ struct amd_chipset_type {
- 	u8 rev;
- };
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static struct amd_chipset_info {
- 	struct pci_dev	*nb_dev;
- 	struct pci_dev	*smbus_dev;
-@@ -511,6 +513,10 @@ void usb_amd_dev_put(void)
- }
- EXPORT_SYMBOL_GPL(usb_amd_dev_put);
- 
-+#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
-+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
-+
- /*
-  * Make sure the controller is completely inactive, unable to
-  * generate interrupts or do DMA.
-@@ -590,8 +596,17 @@ reset_needed:
- 	uhci_reset_hc(pdev, base);
- 	return 1;
- }
-+#else
-+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
-+{
-+	return 0;
-+}
-+
-+#endif
- EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
- {
- 	u16 cmd;
-@@ -1158,3 +1173,4 @@ static void quirk_usb_early_handoff(stru
- }
- DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
- 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
-+#endif
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -4,6 +4,9 @@
- #ifdef CONFIG_PCI
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-+#endif  /* CONFIG_PCI */
-+
-+#if defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
- int usb_amd_find_chipset_info(void);
- int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
- bool usb_amd_hang_symptom_quirk(void);
-@@ -17,12 +20,25 @@ void usb_disable_xhci_ports(struct pci_d
- void sb800_prefetch(struct device *dev, int on);
- #else
- struct pci_dev;
-+static inline int usb_amd_find_chipset_info(void)
-+{
-+	return 0;
-+}
-+static inline bool usb_amd_hang_symptom_quirk(void)
-+{
-+	return false;
-+}
-+static inline bool usb_amd_prefetch_quirk(void)
-+{
-+	return false;
-+}
- static inline void usb_amd_quirk_pll_disable(void) {}
- static inline void usb_amd_quirk_pll_enable(void) {}
- static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
- static inline void usb_amd_dev_put(void) {}
- static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
- static inline void sb800_prefetch(struct device *dev, int on) {}
-+static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
- #endif  /* CONFIG_PCI */
- 
- #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -461,7 +461,14 @@ extern int usb_hcd_pci_probe(struct pci_
- extern void usb_hcd_pci_remove(struct pci_dev *dev);
- extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
-+#else
-+static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
-+{
-+	return 0;
-+}
-+#endif
- 
- #ifdef CONFIG_PM
- extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
diff --git a/target/linux/generic/pending-4.9/821-usb-Remove-annoying-warning-about-bogus-URB.patch b/target/linux/generic/pending-4.9/821-usb-Remove-annoying-warning-about-bogus-URB.patch
deleted file mode 100644
index dc60557f4e..0000000000
--- a/target/linux/generic/pending-4.9/821-usb-Remove-annoying-warning-about-bogus-URB.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Subject: usb: Remove annoying warning about bogus URB
-
-When ath9k-htc Wi-Fi dongle is used with generic OHCI controller
-infinite stream of warnings appears in debug console like this:
--------------------------->8----------------------
-usb 1-1: new full-speed USB device number 2 using ohci-platform
-usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
-usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size:
-51008
-------------[ cut here ]------------
-WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
-usb_submit_urb+0x1b4/0x498()
-usb 1-1: BOGUS urb xfer, pipe 1 != type 3
-Modules linked in:
-CPU: 0 PID: 19 Comm: kworker/0:1 Not tainted
-4.4.0-rc4-00017-g00e2d79-dirty #3
-Workqueue: events request_firmware_work_func
-
-Stack Trace:
-  arc_unwind_core.constprop.1+0xa4/0x110
----[ end trace 649ef8c342817fc2 ]---
-------------[ cut here ]------------
-WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
-usb_submit_urb+0x1b4/0x498()
-usb 1-1: BOGUS urb xfer, pipe 1 != type 3
-Modules linked in:
-CPU: 0 PID: 19 Comm: kworker/0:1 Tainted: G        W
-4.4.0-rc4-00017-g00e2d79-dirty #3
-Workqueue: events request_firmware_work_func
-
-Stack Trace:
-  arc_unwind_core.constprop.1+0xa4/0x110
----[ end trace 649ef8c342817fc3 ]---
-------------[ cut here ]------------
--------------------------->8----------------------
-
-There're some discussions in mailing lists proposing to disable
-that particular check alltogether and magically all seem to work
-fine with muted warning.
-
-Anyways new thread on that regard could be found here:
-http://lists.infradead.org/pipermail/linux-snps-arc/2016-July/001310.html
-
-Let's see what comes out of that new discussion, hopefully patching
-of generic USB stuff won't be required then.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
----
- drivers/usb/core/urb.c | 5 -----
- 1 file changed, 5 deletions(-)
-
---- a/drivers/usb/core/urb.c
-+++ b/drivers/usb/core/urb.c
-@@ -321,9 +321,6 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
-  */
- int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
- {
--	static int			pipetypes[4] = {
--		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
--	};
- 	int				xfertype, max;
- 	struct usb_device		*dev;
- 	struct usb_host_endpoint	*ep;
-@@ -441,11 +438,6 @@ int usb_submit_urb(struct urb *urb, gfp_
- 	 * cause problems in HCDs if they get it wrong.
- 	 */
- 
--	/* Check that the pipe's type matches the endpoint's type */
--	if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
--		dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
--			usb_pipetype(urb->pipe), pipetypes[xfertype]);
--
- 	/* Check against a simple/standard policy */
- 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
- 			URB_FREE_BUFFER);
diff --git a/target/linux/generic/pending-4.9/834-ledtrig-libata.patch b/target/linux/generic/pending-4.9/834-ledtrig-libata.patch
deleted file mode 100644
index 4715182c6b..0000000000
--- a/target/linux/generic/pending-4.9/834-ledtrig-libata.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: libata: add ledtrig support
-
-This adds a LED trigger for each ATA port indicating disk activity.
-
-As this is needed only on specific platforms (NAS SoCs and such),
-these platforms should define ARCH_WANTS_LIBATA_LEDS if there
-are boards with LED(s) intended to indicate ATA disk activity and
-need the OS to take care of that.
-In that way, if not selected, LED trigger support not will be
-included in libata-core and both, codepaths and structures remain
-untouched.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/ata/Kconfig       | 16 ++++++++++++++++
- drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
- include/linux/libata.h    |  9 +++++++++
- 3 files changed, 66 insertions(+)
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR
- 
- 	  If unsure, say Y.
- 
-+config ARCH_WANT_LIBATA_LEDS
-+	bool
-+
-+config ATA_LEDS
-+	bool "support ATA port LED triggers"
-+	depends on ARCH_WANT_LIBATA_LEDS
-+	select NEW_LEDS
-+	select LEDS_CLASS
-+	select LEDS_TRIGGERS
-+	default y
-+	help
-+	  This option adds a LED trigger for each registered ATA port.
-+	  It is used to drive disk activity leds connected via GPIO.
-+
-+	  If unsure, say N.
-+
- config ATA_ACPI
- 	bool "ATA ACPI Support"
- 	depends on ACPI
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -731,6 +731,19 @@ u64 ata_tf_read_block(const struct ata_t
- 	return block;
- }
- 
-+#ifdef CONFIG_ATA_LEDS
-+#define LIBATA_BLINK_DELAY 20 /* ms */
-+static inline void ata_led_act(struct ata_port *ap)
-+{
-+	unsigned long led_delay = LIBATA_BLINK_DELAY;
-+
-+	if (unlikely(!ap->ledtrig))
-+		return;
-+
-+	led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
-+}
-+#endif
-+
- /**
-  *	ata_build_rw_tf - Build ATA taskfile for given read/write request
-  *	@tf: Target ATA taskfile
-@@ -4995,6 +5008,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
- 		if (tag < 0)
- 			return NULL;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	ata_led_act(ap);
-+#endif
- 
- 	qc = __ata_qc_from_tag(ap, tag);
- 	qc->tag = tag;
-@@ -5896,6 +5912,9 @@ struct ata_port *ata_port_alloc(struct a
- 	ap->stats.unhandled_irq = 1;
- 	ap->stats.idle_irq = 1;
- #endif
-+#ifdef CONFIG_ATA_LEDS
-+	ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
-+#endif
- 	ata_sff_port_init(ap);
- 
- 	return ap;
-@@ -5917,6 +5936,12 @@ static void ata_host_release(struct devi
- 
- 		kfree(ap->pmp_link);
- 		kfree(ap->slave_link);
-+#ifdef CONFIG_ATA_LEDS
-+		if (ap->ledtrig) {
-+			led_trigger_unregister(ap->ledtrig);
-+			kfree(ap->ledtrig);
-+		};
-+#endif
- 		kfree(ap);
- 		host->ports[i] = NULL;
- 	}
-@@ -6363,7 +6388,23 @@ int ata_host_register(struct ata_host *h
- 		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
- 		host->ports[i]->local_port_no = i + 1;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	for (i = 0; i < host->n_ports; i++) {
-+		if (unlikely(!host->ports[i]->ledtrig))
-+			continue;
- 
-+		snprintf(host->ports[i]->ledtrig_name,
-+			sizeof(host->ports[i]->ledtrig_name), "ata%u",
-+			host->ports[i]->print_id);
-+
-+		host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
-+
-+		if (led_trigger_register(host->ports[i]->ledtrig)) {
-+			kfree(host->ports[i]->ledtrig);
-+			host->ports[i]->ledtrig = NULL;
-+		}
-+	}
-+#endif
- 	/* Create associated sysfs transport objects  */
- 	for (i = 0; i < host->n_ports; i++) {
- 		rc = ata_tport_add(host->dev,host->ports[i]);
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -38,6 +38,9 @@
- #include <linux/acpi.h>
- #include <linux/cdrom.h>
- #include <linux/sched.h>
-+#ifdef CONFIG_ATA_LEDS
-+#include <linux/leds.h>
-+#endif
- 
- /*
-  * Define if arch has non-standard setup.  This is a _PCI_ standard
-@@ -884,6 +887,12 @@ struct ata_port {
- #ifdef CONFIG_ATA_ACPI
- 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
- #endif
-+
-+#ifdef CONFIG_ATA_LEDS
-+	struct led_trigger	*ledtrig;
-+	char			ledtrig_name[8];
-+#endif
-+
- 	/* owned by EH */
- 	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
- };
diff --git a/target/linux/generic/pending-4.9/890-uart_optional_sysrq.patch b/target/linux/generic/pending-4.9/890-uart_optional_sysrq.patch
deleted file mode 100644
index d80246db99..0000000000
--- a/target/linux/generic/pending-4.9/890-uart_optional_sysrq.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: John Crispin <john@phrozen.org>
-Subject: serial: do not accept sysrq characters via serial port
-
-many embedded boards have a disconnected TTL level serial which can
-generate some garbage that can lead to spurious false sysrq detects.
-
-[john@phrozen.org: sent upstream 22.12.2016]
-
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/serial_core.h | 2 +-
- lib/Kconfig.debug           | 5 +++++
- 2 files changed, 6 insertions(+), 1 deletion(-)
-
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -456,7 +456,7 @@ extern void uart_handle_cts_change(struc
- extern void uart_insert_char(struct uart_port *port, unsigned int status,
- 		 unsigned int overrun, unsigned int ch, unsigned int flag);
- 
--#ifdef SUPPORT_SYSRQ
-+#if defined(SUPPORT_SYSRQ) && defined(CONFIG_MAGIC_SYSRQ_SERIAL)
- static inline int
- uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
- {
---- a/lib/Kconfig.debug
-+++ b/lib/Kconfig.debug
-@@ -410,6 +410,11 @@ config MAGIC_SYSRQ_DEFAULT_ENABLE
- 	  This may be set to 1 or 0 to enable or disable them all, or
- 	  to a bitmask as described in Documentation/sysrq.txt.
- 
-+config MAGIC_SYSRQ_SERIAL
-+	bool "Enable magic SysRq key over serial"
-+	depends on MAGIC_SYSRQ
-+	default y
-+
- config DEBUG_KERNEL
- 	bool "Kernel debugging"
- 	help
diff --git a/target/linux/generic/pending-4.9/920-mangle_bootargs.patch b/target/linux/generic/pending-4.9/920-mangle_bootargs.patch
deleted file mode 100644
index 3422f41519..0000000000
--- a/target/linux/generic/pending-4.9/920-mangle_bootargs.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
-
-Enabling this option renames the bootloader supplied root=
-and rootfstype= variables, which might have to be know but
-would break the automatisms OpenWrt uses.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- init/Kconfig |  9 +++++++++
- init/main.c  | 24 ++++++++++++++++++++++++
- 2 files changed, 33 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1694,6 +1694,15 @@ config EMBEDDED
- 	  an embedded system so certain expert options are available
- 	  for configuration.
- 
-+config MANGLE_BOOTARGS
-+	bool "Rename offending bootargs"
-+	depends on EXPERT
-+	help
-+	  Sometimes the bootloader passed bogus root= and rootfstype=
-+	  parameters to the kernel, and while you want to ignore them,
-+	  you need to know the values f.e. to support dual firmware
-+	  layouts on the flash.
-+
- config HAVE_PERF_EVENTS
- 	bool
- 	help
---- a/init/main.c
-+++ b/init/main.c
-@@ -353,6 +353,29 @@ static inline void setup_nr_cpu_ids(void
- static inline void smp_prepare_cpus(unsigned int maxcpus) { }
- #endif
- 
-+#ifdef CONFIG_MANGLE_BOOTARGS
-+static void __init mangle_bootargs(char *command_line)
-+{
-+	char *rootdev;
-+	char *rootfs;
-+
-+	rootdev = strstr(command_line, "root=/dev/mtdblock");
-+
-+	if (rootdev)
-+		strncpy(rootdev, "mangled_rootblock=", 18);
-+
-+	rootfs = strstr(command_line, "rootfstype");
-+
-+	if (rootfs)
-+		strncpy(rootfs, "mangled_fs", 10);
-+
-+}
-+#else
-+static void __init mangle_bootargs(char *command_line)
-+{
-+}
-+#endif
-+
- /*
-  * We need to store the untouched command line for future reference.
-  * We also need to store the touched command line since the parameter
-@@ -506,6 +529,7 @@ asmlinkage __visible void __init start_k
- 	pr_notice("%s", linux_banner);
- 	setup_arch(&command_line);
- 	mm_init_cpumask(&init_mm);
-+	mangle_bootargs(command_line);
- 	setup_command_line(command_line);
- 	setup_nr_cpu_ids();
- 	setup_per_cpu_areas();
diff --git a/target/linux/imx6/Makefile b/target/linux/imx6/Makefile
index 457e767c05..49e4487026 100644
--- a/target/linux/imx6/Makefile
+++ b/target/linux/imx6/Makefile
@@ -15,7 +15,6 @@ CPU_SUBTYPE:=neon
 MAINTAINER:=Luka Perkov <luka@openwrt.org>
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/imx6/patches-4.19/100-bootargs.patch b/target/linux/imx6/patches-4.19/100-bootargs.patch
deleted file mode 100644
index caf2d2a372..0000000000
--- a/target/linux/imx6/patches-4.19/100-bootargs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -15,4 +15,8 @@
- 	memory@10000000 {
- 		reg = <0x10000000 0x40000000>;
- 	};
-+
-+	chosen {
-+		bootargs = "console=ttymxc0,115200";
-+	};
- };
diff --git a/target/linux/imx6/patches-4.19/301-apalis-ixora-dts-leds.patch b/target/linux/imx6/patches-4.19/301-apalis-ixora-dts-leds.patch
deleted file mode 100644
index bae9df1734..0000000000
--- a/target/linux/imx6/patches-4.19/301-apalis-ixora-dts-leds.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-arm: dts: apalis-ixora: Add status LEDs aliases
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-@@ -60,6 +60,10 @@
- 		i2c2 = &i2c2;
- 		rtc0 = &rtc_i2c;
- 		rtc1 = &snvs_rtc;
-+		led-boot = &led_boot;
-+		led-failsafe = &led_failsafe;
-+		led-running = &led_running;
-+		led-upgrade = &led_upgrade;
- 	};
- 
- 	chosen {
-@@ -127,22 +131,22 @@
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&pinctrl_leds_ixora>;
- 
--		led4-green {
-+		led_running: led4-green {
- 			label = "LED_4_GREEN";
- 			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		led4-red {
-+		led_upgrade: led4-red {
- 			label = "LED_4_RED";
- 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		led5-green {
-+		led_boot: led5-green {
- 			label = "LED_5_GREEN";
- 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		led5-red {
-+		led_failsafe: led5-red {
- 			label = "LED_5_RED";
- 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- 		};
---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-@@ -61,6 +61,10 @@
- 		i2c2 = &i2c2;
- 		rtc0 = &rtc_i2c;
- 		rtc1 = &snvs_rtc;
-+		led-boot = &led_boot;
-+		led-failsafe = &led_failsafe;
-+		led-running = &led_running;
-+		led-upgrade = &led_upgrade;
- 	};
- 
- 	chosen {
-@@ -128,22 +132,22 @@
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&pinctrl_leds_ixora>;
- 
--		led4-green {
-+		led_running: led4-green {
- 			label = "LED_4_GREEN";
--			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		led4-red {
-+		led_upgrade: led4-red {
- 			label = "LED_4_RED";
--			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		led5-green {
-+		led_boot: led5-green {
- 			label = "LED_5_GREEN";
- 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		led5-red {
-+		led_failsafe: led5-red {
- 			label = "LED_5_RED";
- 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- 		};
diff --git a/target/linux/imx6/patches-4.19/302-apalis-ixora-dts-reset-button.patch b/target/linux/imx6/patches-4.19/302-apalis-ixora-dts-reset-button.patch
deleted file mode 100644
index da9de296a2..0000000000
--- a/target/linux/imx6/patches-4.19/302-apalis-ixora-dts-reset-button.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-arm: dts: apalis-ixora: Add switch3 as reset button
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-@@ -74,7 +74,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 		pinctrl-names = "default";
--		pinctrl-0 = <&pinctrl_gpio_keys>;
-+		pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>;
- 
- 		wakeup {
- 			label = "Wake-Up";
-@@ -83,6 +83,13 @@
- 			debounce-interval = <10>;
- 			wakeup-source;
- 		};
-+
-+		reset {
-+			label = "reset";
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+			linux,code = <KEY_RESTART>;
-+			debounce-interval = <10>;
-+		};
- 	};
- 
- 	lcd_display: disp0 {
-@@ -296,4 +303,10 @@
- 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- 		>;
- 	};
-+
-+	pinctrl_switch3_ixora: switch3ixora {
-+		fsl,pins = <
-+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-+		>;
-+	};
- };
---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-@@ -73,7 +73,7 @@
- 	gpio-keys {
- 		compatible = "gpio-keys";
- 		pinctrl-names = "default";
--		pinctrl-0 = <&pinctrl_gpio_keys>;
-+		pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>;
- 
- 		wakeup {
- 			label = "Wake-Up";
-@@ -82,6 +82,13 @@
- 			debounce-interval = <10>;
- 			wakeup-source;
- 		};
-+
-+		reset {
-+			label = "reset";
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+			linux,code = <KEY_RESTART>;
-+			debounce-interval = <10>;
-+		};
- 	};
- 
- 	lcd_display: disp0 {
-@@ -297,4 +304,10 @@
- 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- 		>;
- 	};
-+
-+	pinctrl_switch3_ixora: switch3ixora {
-+		fsl,pins = <
-+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-+		>;
-+	};
- };
diff --git a/target/linux/ipq40xx/Makefile b/target/linux/ipq40xx/Makefile
index 2785b73ed1..ab7b174e40 100644
--- a/target/linux/ipq40xx/Makefile
+++ b/target/linux/ipq40xx/Makefile
@@ -10,7 +10,6 @@ MAINTAINER:=John Crispin <john@phrozen.org>
 
 # TODO: drop kmod-usb-dwc3-of-simple when migrating to 4.19
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 KERNELNAME:=zImage Image dtbs
 
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts
deleted file mode 100644
index 33c44a8097..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "OpenMesh A42";
-	compatible = "openmesh,a42";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			label = "a42:red:status";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-
-		power: green {
-			label = "a42:green:status";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue {
-			label = "a42:blue:status";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		/* hw_margin_ms is actually 300s but driver limits it to 60s */
-		hw_margin_ms = <60000>;
-		always-running;
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		/* partitions are passed via bootloader */
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A42";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A42";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
deleted file mode 100644
index e21c40cae0..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ /dev/null
@@ -1,348 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ALFA Network AP120C-AC";
-	compatible = "alfa-network,ap120c-ac";
-
-	aliases {
-		led-boot = &status;
-		led-failsafe = &status;
-		led-running = &status;
-		led-upgrade = &status;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status: status {
-			label = "ap120c-ac:blue:status";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		wan {
-			label = "ap120c-ac:amber:wan";
-			gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "ap120c-ac:green:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "ap120c-ac:red:wlan5g";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				phys = <&usb3_hs_phy>;
-				phy-names = "usb2-phy";
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		qca8075: ess-switch@c000000 {
-			status = "okay";
-
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_i2c3 {
-	status = "okay";
-
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	tpm@29 {
-		compatible = "atmel,at97sc3204t";
-		reg = <0x29>;
-	};
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm  4 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-			};
-
-			partition@f0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "priv_data1";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-
-			partition@190000 {
-				label = "priv_data2";
-				reg = <0x00190000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	nand@1 {
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "rootfs1";
-				reg = <0x00000000 0x04000000>;
-			};
-
-			partition@4000000 {
-				label = "rootfs2";
-				reg = <0x04000000 0x04000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial0_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,forced_duplex = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
-	qcom,forced_duplex = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&tlmm {
-	i2c0_pins: i2c0_pinmux {
-		mux_i2c {
-			function = "blsp_i2c0";
-			pins = "gpio58", "gpio59";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_mdio {
-			pins = "gpio53";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_mdc {
-			pins = "gpio52";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial0_pins: serial0_pinmux {
-		mux_uart {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi0_pins: spi0_pinmux {
-		mux_spi {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio4";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
deleted file mode 100644
index 2f9a890485..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Linksys EA6350v3";
-	compatible = "linksys,ea6350v3";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: status {
-			label = "EA6350v3:green:status";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-
-&blsp_dma {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			SBL1@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			MBIB@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			QSEE@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			CDT@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			APPSBLENV@d0000 {
-				label = "APPSBLENV";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			APPSBL@e0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000e0000 0x00080000>;
-				read-only;
-			};
-			ART@160000 {
-				label = "ART";
-				reg = <0x00160000 0x00010000>;
-				read-only;
-			};
-			u_env@170000 {
-				label = "u_env";
-				reg = <0x00170000 0x00020000>;
-			};
-			s_env@190000 {
-				label = "s_env";
-				reg = <0x00190000 0x00020000>;
-			};
-			devinfo@1b0000 {
-				label = "devinfo";
-				reg = <0x001b0000 0x00010000>;
-			};
-			/* 0x001c0000 - 0x00200000 unused */
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			kernel@0 {
-				label = "kernel";
-				reg = <0x00000000 0x02800000>;
-			};
-			rootfs@300000 {
-				label = "rootfs";
-				reg = <0x00300000 0x02500000>;
-			};
-			alt_kernel@2800000 {
-				label = "alt_kernel";
-				reg = <0x02800000 0x02800000>;
-			};
-			alt_rootfs@2b00000 {
-				label = "alt_rootfs";
-				reg = <0x02b00000 0x02500000>;
-			};
-			sysdiag@5000000 {
-				label = "sysdiag";
-				reg = <0x05000000 0x00100000>;
-			};
-			syscfg@5100000 {
-				label = "syscfg";
-				reg = <0x05100000 0x02F00000>;
-			};
-			/* 0x00000000 - 0x08000000: 128 MiB */
-		};
-	};
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
deleted file mode 100644
index 32fded4c0e..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius EAP1300";
-	compatible = "engenius,eap1300";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: orange {
-			label = "eap1300:orange:power";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-
-		lan {
-			label = "eap1300:blue:lan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		mesh {
-			label = "eap1300:blue:mesh";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "eap1300:blue:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "eap1300:yellow:wlan5g";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio54", "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "0:APPSBL";
-				reg = <0x000f0000 0x00090000>;
-				read-only;
-			};
-			partition7@180000 {
-				label = "0:ART";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-			partition8@190000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x190000 0x1dc0000>;
-			};
-			partition9@1f50000 {
-				label = "u-boot-env";
-				reg = <0x01f50000 0x00010000>;
-			};
-			partition10@1f60000 {
-				label = "userconfig";
-				reg = <0x01f60000 0x000a0000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
deleted file mode 100644
index 8636b18b2e..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius ENS620EXT";
-	compatible = "engenius,ens620ext";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-
-		/*
-		 * Disable the broken restart as a workaround for the buggy
-		 * 3.0.0/3.0.1 U-boots that ship with the device.
-		 * Note: The watchdog is now used to restart this device.
-		 */
-		restart@4ab000 {
-			status = "disabled";
-		};
-	};
-
-	buttons {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: power {
-			label = "ens620ext:amber:power";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "ens620ext:green:lan1";
-			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "ens620ext:green:lan2";
-			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2G {
-			label = "ens620ext:green:wlan2G";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5G {
-			label = "ens620ext:green:wlan5G";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00090000>;
-				read-only;
-			};
-			partition@180000 {
-				label = "ART";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-			partition@190000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00190000 0x14d0000>;
-			};
-			partition@1660000 {
-				label = "failsafe";
-				reg = <0x01660000 0x008F0000>;
-				read-only;
-			};
-			partition@1f50000 {
-				label = "u-boot-env";
-				reg = <0x01f50000 0x00010000>;
-				read-only;
-			};
-			partition@1f60000 {
-				label = "userconfig";
-				reg = <0x01f60000 0x000a0000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts
deleted file mode 100644
index 2b93dcbb99..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear EX6100v2";
-	compatible = "netgear,ex6100v2";
-};
-
-&wifi0 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
-
-&wifi1 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
deleted file mode 100644
index f1c44c1ae8..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear EX6150v2";
-	compatible = "netgear,ex6150v2";
-};
-
-&wifi0 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
-
-&wifi1 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
deleted file mode 100644
index ca514e2940..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ /dev/null
@@ -1,311 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Netgear EX61X0v2";
-	compatible = "netgear,ex61x0v2";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	aliases {
-		led-boot = &power_amber;
-		led-failsafe = &power_amber;
-		led-running = &power_green;
-		led-upgrade = &power_amber;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	led_spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-sck = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <0>;
-
-		led_gpio: led_gpio@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			registers-number = <1>;
-			spi-max-frequency = <1000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_amber: power_amber {
-			label = "ex61x0v2:amber:power";
-			gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power_green {
-			label = "ex61x0v2:green:power";
-			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
-		};
-
-		right {
-			label = "ex61x0v2:blue:right";
-			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
-		};
-
-		left {
-			label = "ex61x0v2:blue:left";
-			gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		client_green {
-			label = "ex61x0v2:green:client";
-			gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
-		};
-
-		client_red {
-			label = "ex61x0v2:red:client";
-			gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
-		};
-
-		router_green {
-			label = "ex61x0v2:green:router";
-			gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
-		};
-
-		router_red {
-			label = "ex61x0v2:red:router";
-			gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "ex61x0v2:green:wps";
-			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l12805d@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition5@E0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-
-			partition6@F0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition7@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition8@180000 {
-				label = "config";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-
-			partition9@190000 {
-				label = "pot";
-				reg = <0x00190000 0x00010000>;
-				read-only;
-			};
-
-			partition10@1a0000 {
-				label = "dnidata";
-				reg = <0x001a0000 0x00010000>;
-				read-only;
-			};
-
-			partition11@1b0000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x001b0000 0x00e10000>;
-			};
-
-			partition12@fc0000 {
-				label = "language";
-				reg = <0x00fc0000 0x00040000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts
deleted file mode 100644
index f9508cc460..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "AVM FRITZ!Box 4040";
-	compatible = "avm,fritzbox-4040";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &flash;
-		led-running = &power;
-		led-upgrade = &flash;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		qca8075: ess-switch@c000000 {
-			status = "okay";
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			enable-usb-power {
-				gpio-hog;
-				line-name = "enable USB3 power";
-				gpios = <7 GPIO_ACTIVE_HIGH>;
-				output-high;
-			};
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wlan {
-			label = "wlan";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	switch-leds {
-		compatible = "gpio-leds";
-
-		wlan {
-			label = "fritz4040:green:wlan";
-			gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		panic: info_red {
-			label = "fritz4040:red:info";
-			gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-
-		wan {
-			label = "fritz4040:green:wan";
-			gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "fritz4040:green:power";
-			gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan {
-			label = "fritz4040:green:lan";
-			gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		flash: info_amber {
-			label = "fritz4040:amber:info";
-			gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		status = "okay";
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "APPSBLENV"; /* uboot env - empty */
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "urlader"; /* APPSBL */
-				reg = <0x000f0000 0x0002dc000>;
-				read-only;
-			};
-			partition7@11dc00 {
-				/* make a backup of this partition! */
-				label = "urlader_config";
-				reg = <0x0011dc00 0x00002400>;
-				read-only;
-			};
-			partition8@120000 {
-				label = "tffs1";
-				reg = <0x00120000 0x00080000>;
-				read-only;
-			};
-			partition9@1a0000 {
-				label = "tffs2";
-				reg = <0x001a0000 0x00080000>;
-				read-only;
-			};
-			partition10@220000 {
-				label = "uboot";
-				reg = <0x00220000 0x00080000>;
-				read-only;
-			};
-			partition11@2A0000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x002a0000 0x01c60000>;
-			};
-			partition12@1f00000 {
-				label = "jffs2";
-				reg = <0x01f00000 0x00100000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
deleted file mode 100644
index 9730f1027f..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
+++ /dev/null
@@ -1,266 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "8devices Jalapeno";
-	compatible = "8dev,jalapeno";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x10>; /* lan port bitmap */
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		pinmux_1 {
-			pins = "gpio53";
-			function = "mdio";
-		};
-		pinmux_2 {
-			pins = "gpio52";
-			function = "mdc";
-		};
-		pinconf {
-			pins = "gpio52", "gpio53";
-			bias-pull-up;
-		};
-	};
-
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <2>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	m25p80@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition5@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition5@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	spi-nand@1 {
-		status = "okay";
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "ubi";
-				reg = <0x00000000 0x08000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,poll_required = <1>;
-	qcom,poll_required_dynamic = <1>;
-	qcom,phy_mdio_addr = <3>;
-	vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
-	qcom,poll_required = <1>;
-	qcom,poll_required_dynamic = <1>;
-	qcom,phy_mdio_addr = <4>;
-	vlan_tag = <2 0x20>;
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
deleted file mode 100644
index a8c144f928..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ /dev/null
@@ -1,337 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ZyXEL NBG6617";
-	compatible = "zyxel,nbg6617";
-
-	chosen {
-		/*
-		 * the vendor u-boot adds root and mtdparts cmdline parameters
-		 * which we don't want... but we have to overwrite them or else
-		 * the kernel will take them at face value.
-		 */
-		bootargs-append = " mtdparts= root=31:13";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wlan {
-			label = "wlan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RFKILL>;
-			linux,input-type = <EV_SW>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		power: power {
-			label = "nbg6617:green:power";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb {
-			label = "nbg6617:green:usb";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		wlan2G {
-			label = "nbg6617:green:wlan2G";
-			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5G {
-			label = "nbg6617:green:wlan5G";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "nbg6617:green:wps";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-low;
-		};
-	};
-	led_pins: led_pinmux {
-		mux {
-			pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
-			drive-strength = <0x8>;
-			bias-disable;
-			output-low;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l25635f@0 {
-		compatible = "mx25l25635f", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		status = "okay";
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "APPSBL"; /* u-boot */
-				reg = <0x000e0000 0x00080000>;
-				/* U-Boot Standalone App "zloader" is located at 0x64000 */
-				read-only;
-			};
-			partition6@160000 {
-				label = "APPSBLENV"; /* u-boot env */
-				reg = <0x00160000 0x00010000>;
-			};
-			partition7@170000 {
-				/* make a backup of this partition! */
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			partition8@180000 {
-				label = "kernel";
-				reg = <0x00180000 0x00400000>;
-			};
-			partition9@580000 {
-				label = "dualflag";
-				reg = <0x00580000 0x00010000>;
-				read-only;
-			};
-			partition10@590000 {
-				label = "header";
-				reg = <0x00590000 0x00010000>;
-			};
-			partition11@5a0000 {
-				label = "romd";
-				reg = <0x005a0000 0x00100000>;
-				read-only;
-			};
-			partition12@6a0000 {
-				label = "not_root_data";
-				/*
-				 * for some strange reason, someone at ZyXEL
-				 * had the "great" idea to put the rootfs_data
-				 * in front of rootfs... Don't do that!
-				 * As a result this one, full MebiByte remains
-				 * unused.
-				 */
-				reg = <0x006a0000 0x00100000>;
-			};
-			partition13@7a0000 {
-				label = "rootfs";
-				reg = <0x007a0000 0x01860000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
deleted file mode 100644
index 26c086ed25..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ /dev/null
@@ -1,325 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ASUS RT-AC58U";
-	compatible = "asus,rt-ac58u";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		bootargs-append = " ubi.mtd=UBI_DEV";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: status {
-			label = "rt-ac58u:blue:status";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "rt-ac58u:blue:wan";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2G {
-			label = "rt-ac58u:blue:wlan2G";
-			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan5G {
-			label = "rt-ac58u:blue:wlan5G";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb {
-			label = "rt-ac58u:blue:usb";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		lan {
-			label = "rt-ac58u:blue:lan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		/*
-		 * U-boot looks for "n25q128a11" node,
-		 * if we don't have it, it will spit out the following warning:
-		 * "ipq: fdt fixup unable to find compatible node".
-		 */
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			/* 0x00180000 - 0x00200000 unused */
-		};
-	};
-
-	spi-nand@1 {
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		/*
-		 * U-boot looks for "spinand,mt29f" node,
-		 * if we don't have it, it will spit out the following warning:
-		 * "ipq: fdt fixup unable to find compatible node".
-		 */
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				/*
-				 * TODO: change to label = "ubi" once we drop 4.14.
-				 *       also drop the bootargs-append and all the
-				 *	 userspace CI_UBIPART="UBI_DEV" remains.
-				 */
-				label = "UBI_DEV";
-				reg = <0x00000000 0x08000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "RT-AC58U";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "RT-AC58U";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
deleted file mode 100644
index 5932638da0..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
+++ /dev/null
@@ -1,265 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ZyXEL WRE6606";
-	compatible = "zyxel,wre6606";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		bootargs-append = " mtdparts=";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wps {
-			label = "wre6606:green:wps";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g_green {
-			label = "wre6606:green:wlan5g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "wre6606:green:power";
-			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g_red {
-			label = "wre6606:red:wlan5g";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g_red {
-			label = "wre6606:red:wlan2g";
-			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g_green {
-			label = "wre6606:green:wlan2g";
-			gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l12805d@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition5@E0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-
-			partition6@F0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition7@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition8@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00180000 0x00ce0000>;
-			};
-
-			partition9@e60000 {
-				label = "manufacture";
-				reg = <0x00e60000 0x00050000>;
-				read-only;
-			};
-
-			partition10@eb0000 {
-				label = "storage";
-				reg = <0x00eb0000 0x00150000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts
deleted file mode 100644
index 25bbd6b332..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts
+++ /dev/null
@@ -1,243 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "OpenMesh A62";
-	compatible = "openmesh,a62";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART >;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			label = "a62:red:status";
-			gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-
-		power: green {
-			label = "a62:green:status";
-			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue {
-			label = "a62:blue:status";
-			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		/* hw_margin_ms is actually 300s but driver limits it to 60s */
-		hw_margin_ms = <60000>;
-		always-running;
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	enable-usb-power {
-		gpio-hog;
-		gpios = <58 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "enable USB2 power";
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		/* partitions are passed via bootloader */
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-			qcom,ath10k-calibration-variant = "OM-A62";
-			ieee80211-freq-limit = <5170000 5350000>;
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A62";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A62";
-	ieee80211-freq-limit = <5470000 5875000>;
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
deleted file mode 100644
index 47202d28fe..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk04.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
deleted file mode 100644
index 9801354625..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ /dev/null
@@ -1,181 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
-	compatible = "qcom,ipq4019";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_0_pins: serial_pinmux {
-				mux {
-					pins = "gpio16", "gpio17";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			serial_1_pins: serial1_pinmux {
-				mux {
-					pins = "gpio8", "gpio9";
-					function = "blsp_uart1";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio13", "gpio14", "gpio15";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio12";
-				};
-				pinconf {
-					pins = "gpio13", "gpio14", "gpio15";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio12";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			i2c_0_pins: i2c_0_pinmux {
-				pinmux {
-					function = "blsp_i2c0";
-					pins = "gpio10", "gpio11";
-				};
-				pinconf {
-					pins = "gpio10", "gpio11";
-					drive-strength = <16>;
-					bias-disable;
-				};
-			};
-
-			nand_pins: nand_pins {
-
-				pullups {
-					pins = "gpio52", "gpio53", "gpio58",
-						"gpio59";
-					function = "qpic";
-					bias-pull-up;
-				};
-
-				pulldowns {
-					pins = "gpio54", "gpio55", "gpio56",
-						"gpio57", "gpio60", "gpio61",
-						"gpio62", "gpio63", "gpio64",
-						"gpio65", "gpio66", "gpio67",
-						"gpio68", "gpio69";
-					function = "qpic";
-					bias-pull-down;
-				};
-			};
-		};
-
-		blsp_dma: dma@7884000 {
-			status = "okay";
-		};
-
-		spi0: spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-			mx25l25635e@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "mx25l25635e";
-				spi-max-frequency = <24000000>;
-			};
-		};
-
-		i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-
-			status = "okay";
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		usb3_ss_phy: ssphy@9a000 {
-			status = "okay";
-		};
-
-		usb3_hs_phy: hsphy@a6000 {
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-		};
-
-		usb2_hs_phy: hsphy@a8000 {
-			status = "okay";
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		cryptobam: dma@8e04000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		qpic_bam: dma@7984000 {
-			status = "okay";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
deleted file mode 100644
index b04a61dc04..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "AVM FRITZ!Box 7530";
-	compatible = "avm,fritzbox-7530";
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &info_red;
-		led-running = &power_green;
-		led-upgrade = &info_green;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wlan {
-			label = "wlan";
-			gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		dect {
-			label = "dect";
-			gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		info_red: info_red {
-			label = "fritzbox-7530:red:info";
-			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-		};
-
-		info_green: info {
-			label = "fritzbox-7530:green:info";
-			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan {
-			label = "fritzbox-7530:green:wlan";
-			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-		};
-
-		fon {
-			label = "fritzbox-7530:green:fon";
-			gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power {
-			label = "fritzbox-7530:green:power";
-			gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "fritzbox-7530:green:wps";
-			gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&tlmm {
-	serial_0_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-
-	usb-power {
-		line-name = "enable USB3 power";
-		gpios = <49 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x000000 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "MIBIB";
-				reg = <0x080000 0x80000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "QSEE";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "CDT";
-				reg = <0x180000 0x40000>;
-				read-only;
-			};
-
-			partition@1c0000 {
-				label = "QSEE_B";
-				reg = <0x1c0000 0x80000>;
-				read-only;
-			};
-
-			partition@240000 {
-				label = "urlader0";
-				reg = <0x240000 0x40000>;
-				read-only;
-			};
-
-			partition@280000 {
-				label = "urlader1";
-				reg = <0x280000 0x40000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "nand-tffs";
-				reg = <0x2c0000 0x840000>;
-				read-only;
-			};
-
-			partition@b00000 {
-				/* 'kernel1' in AVM firmware */
-				label = "uboot0";
-				reg = <0xb00000 0x400000>;
-			};
-
-			partition@f00000 {
-				/* 'kernel2' in AVM firmware */
-				label = "uboot1";
-				reg = <0xf00000 0x400000>;
-			};
-
-			partition@1300000 {
-				label = "ubi";
-				reg = <0x1300000 0x6d00000>;
-			};
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
-};
-
-&pcie0 {
-	status = "okay";
-
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		dsl@1,0 {
-			compatible = "intel,vrx518";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
deleted file mode 100644
index 6914917eb3..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "AVM FRITZ!Repeater 3000";
-	compatible = "avm,fritzrepeater-3000";
-
-	aliases {
-		led-boot = &power_led;
-		led-failsafe = &power_led;
-		led-running = &power_led;
-		led-upgrade = &power_led;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	key {
-		compatible = "gpio-keys";
-
-		connect {
-			label = "Connect";
-			gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		connect_red {
-			label = "fritzwlan-3000:red:connect";
-			gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-		};
-
-		connect_green {
-			label = "fritzwlan-3000:green:connect";
-			gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
-		};
-
-		connect_blue {
-			label = "fritzwlan-3000:blue:connect";
-			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-		};
-
-		power_led: power {
-			label = "fritzwlan-3000:green:power";
-			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&tlmm {
-	serial_0_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x000000 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "MIBIB";
-				reg = <0x080000 0x80000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "QSEE";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "CDT";
-				reg = <0x180000 0x40000>;
-				read-only;
-			};
-
-			partition@1c0000 {
-				label = "QSEE_B";
-				reg = <0x1c0000 0x80000>;
-				read-only;
-			};
-
-			partition@240000 {
-				label = "urlader0";
-				reg = <0x240000 0x40000>;
-				read-only;
-			};
-
-			partition@280000 {
-				label = "urlader1";
-				reg = <0x280000 0x40000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "nand-tffs";
-				reg = <0x2c0000 0x840000>;
-				read-only;
-			};
-
-			partition@b00000 {
-				/* 'kernel1' in AVM firmware */
-				label = "uboot0";
-				reg = <0xb00000 0x400000>;
-			};
-
-			partition@f00000 {
-				/* 'kernel2' in AVM firmware */
-				label = "uboot1";
-				reg = <0xf00000 0x400000>;
-			};
-
-			partition@1300000 {
-				label = "ubi";
-				reg = <0x1300000 0x6d00000>;
-			};
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
-	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
-};
-
-&wifi1 {
-	status = "okay";
-	ieee80211-freq-limit = <5170000 5350000>;
-	/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
-	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
-};
-
-&pcie0 {
-	status = "okay";
-
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			/* QCA9984 */
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-			ieee80211-freq-limit = <5470000 5875000>;
-			/* Uses the reference BDF */
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-linksys_ea8300.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-linksys_ea8300.dts
deleted file mode 100644
index cfc3037fb2..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-linksys_ea8300.dts
+++ /dev/null
@@ -1,399 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/*
- * Device Tree Source for Linksys EA8300 (Dallas)
- *
- * Copyright (C) 2019 Jeff Kletsky
- *
- */
-
-/dts-v1/;
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Linksys EA8300 (Dallas)";
-	compatible = "linksys,ea8300", "qcom,ipq4019";
-
-
-	aliases {
-		led-boot = &led_wps_amber;
-		led-failsafe = &led_wps;
-		led-running = &led_linksys;
-		led-upgrade = &led_world;
-		serial0 = &blsp1_uart1;
-	};
-
-
-	leds {
-		compatible = "gpio-leds";
-
-		// Retain node names from running OEM on EA8300
-
-		// Front panel LEDs, top to bottom
-
-		led_plug: diag {
-			label = "ea8300:amber:plug";
-			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_world: internet {
-			label = "ea8300:amber:world";
-			gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_wps: wps {
-			label = "ea8300:white:wps";
-			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_wps_amber: wps_amber {
-			label = "ea8300:amber:wps";
-			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-
-		led_linksys: pwr {
-			label = "ea8300:white:linksys";
-			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-		};
-
-		// On back panel, above USB socket
-
-		led_usb: usb {
-			label = "ea8300:green:usb";
-			gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&usb3_port1>, <&usb3_port2>,
-					  <&usb2_port1>;
-			linux,default-trigger = "usbport";
-		};
-	};
-
-
-	keys {
-		compatible = "gpio-keys";
-
-		button@0 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
-		};
-
-		button@1 {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-
-	//
-	// OEM U-Boot provides either
-	// init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \
-	//                 root=ubi0:ubifs rootwait rw
-	// or the same with ubi.mtd=13,2048
-	//
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
-	};
-
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	status = "okay";
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "mibib";
-				reg = <0x100000 0x100000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "qsee";
-				reg = <0x200000 0x100000>;
-				read-only;
-			};
-
-			partition@300000 {
-				label = "cdt";
-				reg = <0x300000 0x80000>;
-				read-only;
-			};
-
-			partition@380000 {
-				label = "appsblenv";
-				reg = <0x380000 0x80000>;
-				read-only;
-			};
-
-			partition@400000 {
-				label = "ART";
-				reg = <0x400000 0x80000>;
-				read-only;
-			};
-
-			partition@480000 {
-				label = "appsbl";
-				reg = <0x480000 0x200000>;
-				read-only;
-			};
-
-			partition@680000 {
-				label = "u_env";
-				reg = <0x680000 0x80000>;
-				// writable -- U-Boot environment
-			};
-
-			partition@700000 {
-				label = "s_env";
-				reg = <0x700000 0x40000>;
-				// writable -- Boot counter records
-			};
-
-			partition@740000 {
-				label = "devinfo";
-				reg = <0x740000 0x40000>;
-				read-only;
-			};
-
-			partition@780000 {
-				label = "kernel";
-				reg = <0x780000 0x5800000>;
-			};
-
-			partition@a80000 {
-				label = "rootfs";
-				reg = <0xa80000 0x5500000>;
-			};
-
-			partition@5f80000 {
-				label = "alt_kernel";
-				reg = <0x5f80000 0x5800000>;
-			};
-
-			partition@6280000 {
-				label = "alt_rootfs";
-				reg = <0x6280000 0x5500000>;
-			};
-
-			partition@b780000 {
-				label = "sysdiag";
-				reg = <0xb780000 0x100000>;
-				read-only;
-			};
-
-			partition@b880000 {
-				label = "syscfg";
-				reg = <0xb880000 0x4680000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			reg = <0x00010000 0 0 0 0>;
-		};
-	};
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	serial_0_pins: serial0-pinmux {
-		pins = "gpio16", "gpio17";
-		function = "blsp_uart0";
-		bias-disable;
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		// gpio61 controls led_usb
-
-		pulldowns {
-			pins =  "gpio55", "gpio56", "gpio57",
-				"gpio60", "gpio62", "gpio63",
-				"gpio64", "gpio65", "gpio66",
-				"gpio67", "gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
-
-&wifi1 {
-	status = "okay";
-	ieee80211-freq-limit = <5170000 5330000>;
-	qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
-
-&wifi2 {
-	status = "okay";
-	ieee80211-freq-limit = <5490000 5835000>;
-	qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
deleted file mode 100644
index a063f8e952..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/dts-v1/;
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ASUS Lyra MAP-AC2200";
-	compatible = "asus,map-ac2200";
-
-	aliases {
-		led-boot = &led_blue0;
-		led-failsafe = &led_red0;
-		led-running = &led_blue0;
-		led-upgrade = &led_red0;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "MIBIB";
-				reg = <0x80000 0x80000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "QSEE";
-				reg = <0x100000 0x100000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "CDT";
-				reg = <0x200000 0x80000>;
-				read-only;
-			};
-
-			partition@280000 {
-				label = "APPSBL";
-				reg = <0x280000 0x140000>;
-				read-only;
-			};
-
-			partition@3c0000 {
-				label = "APPSBLENV";
-				reg = <0x3c0000 0x40000>;
-				read-only;
-			};
-
-			partition@400000 {
-				label = "ubi";
-				reg = <0x400000 0x7c00000>;
-			};
-		};
-	};
-};
-
-&tlmm {
-	i2c_0_pins: i2c_0_pinmux {
-		pinmux {
-			function = "blsp_i2c0";
-			pins = "gpio20", "gpio21";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins =	"gpio52", "gpio53", "gpio58",
-				"gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins =	"gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
-	ieee80211-freq-limit = <5470000 5875000>;
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-			qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
-			ieee80211-freq-limit = <5170000 5350000>;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	/* Bluetooth module attached via USB */
-	status = "okay";
-};
-
-&blsp1_i2c3 {
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	led-controller@32 {
-		/* 9-channel RGB LED controller */
-		compatible = "national,lp5523";
-		reg = <0x32>;
-		clock-mode = [01];
-
-		led_blue0: blue0 {
-			chan-name = "blue0";
-			label = "map-ac2200:blue:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		blue1 {
-			chan-name = "blue1";
-			label = "map-ac2200:blue:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		blue2 {
-			chan-name = "blue2";
-			label = "map-ac2200:blue:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		led_green0: green0 {
-			chan-name = "green0";
-			label = "map-ac2200:green:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		green1 {
-			chan-name = "green1";
-			label = "map-ac2200:green:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		green2 {
-			chan-name = "green2";
-			label = "map-ac2200:green:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		led_red0: red0 {
-			chan-name = "red0";
-			label = "map-ac2200:red:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		red1 {
-			chan-name = "red1";
-			label = "map-ac2200:red:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		red2 {
-			chan-name = "red2";
-			label = "map-ac2200:red:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac-c1.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac-c1.dts
deleted file mode 100644
index ab0ec76f16..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac-c1.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-qxwlan-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Qxwlan E2600AC c1";
-	compatible = "qxwlan,e2600ac-c1";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "0:QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "0:CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "0:APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "0:ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-			partition@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x180000 0x1e80000>;
-			};
-		};
-	};
-};
-
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac-c2.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac-c2.dts
deleted file mode 100644
index 1c6e859951..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac-c2.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-qxwlan-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Qxwlan E2600AC c2";
-	compatible = "qxwlan,e2600ac-c2";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "0:QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "0:CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "0:APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "0:ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ubi";
-				reg = <0x00000000 0x04000000>;
-			};
-		};
-	};
-};
-
-&tlmm {
-	nand_pins: nand-pins {
-
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac.dtsi
deleted file mode 100644
index f4af2ba25f..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-qxwlan-e2600ac.dtsi
+++ /dev/null
@@ -1,266 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-
-	model = "Qxwlan E2600AC";
-	compatible = "qcom,ipq4019";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256MB */
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		i2c@78b7000 { /* BLSP1 QUP2 */
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-
-			led1 {
-				label = "e2600ac:green:wlan0";
-				gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
-			};
-
-			led2 {
-				label = "e2600ac:green:wlan1";
-				gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
-			};
-
-			led3 {
-				label = "e2600ac:green:usb";
-				gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-				trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
-				linux,default-trigger = "usbport";
-			};
-
-			led4 {
-				label = "e2600ac:green:ctrl1";
-				gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
-			};
-
-			led5 {
-				label = "e2600ac:green:ctrl2";
-				gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-			};
-
-			led6 {
-				label = "e2600ac:green:ctrl3";
-				gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
-			};
-		};
-
-		keys {
-			compatible = "gpio-keys";
-
-			reset {
-				label = "reset";
-				gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-				linux,code = <KEY_RESTART>;
-			};
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	i2c_0_pins: i2c-0-pinmux {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "blsp_i2c0";
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_0_pins: serial0-pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	serial_1_pins: serial1_pinmux {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
deleted file mode 100644
index cf8540c101..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ /dev/null
@@ -1,270 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Compex WPJ428";
-	compatible = "compex,wpj428";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &status;
-		led-failsafe = &status;
-		led-upgrade = &status;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status: rss4 {
-			label = "wpj428:green:rss4";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		rss3 {
-			label = "wpj428:green:rss3";
-			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	beeper: beeper {
-		compatible = "gpio-beeper";
-		gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "0:APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition5@f0000 {
-				label = "0:APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition5@170000 {
-				label = "0:ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			partition6@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00180000 0x01e80000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
deleted file mode 100644
index b32eb29f8c..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ /dev/null
@@ -1,280 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "GL.iNet GL-B1300";
-	compatible = "glinet,gl-b1300";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x18>;
-			switch_wan_bmp = <0x20>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: power {
-			label = "gl-b1300:green:power";
-			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		mesh {
-			label = "gl-b1300:green:mesh";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan {
-			label = "gl-b1300:green:wlan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l25635f@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			SBL1@0 {
-				label = "SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			MIBIB@40000 {
-				label = "MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			QSEE@60000 {
-				label = "QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			CDT@c0000 {
-				label = "CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			DDRPARAMS@d0000 {
-				label = "DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			APPSBLENV@e0000 {
-				label = "APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			APPSBL@f0000 {
-				label = "APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-
-			ART@170000 {
-				label = "ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-
-			firmware@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x180000 0x1e80000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio54";
-		};
-		pinconf {
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf_cs {
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "GL-B1300";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "GL-B1300";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
deleted file mode 100644
index 5003572420..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
+++ /dev/null
@@ -1,400 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Meraki MR33 (Stinkbug)
- *
- * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
- * Copyright (C) 2017 Christian Lamparter <chunkeey@googlemail.com>
- *
- * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Meraki MR33 Access Point";
-	compatible = "meraki,mr33";
-
-	aliases {
-		led-boot = &status_green;
-		led-failsafe = &status_red;
-		led-running = &status_green;
-		led-upgrade = &power_orange;
-	};
-
-	/* Do we really need this defined? */
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		/* It is a 56-bit counter that supplies the count to the ARM arch
-		   timers and without upstream driver */
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			bluetooth {
-				compatible = "ti,cc2650";
-				enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
-			switch_lan_bmp = <0x0>; /* lan port bitmap */
-			switch_wan_bmp = <0x10>; /* wan port bitmap */
-		};
-
-		edma@c080000 {
-			qcom,single-phy;
-			qcom,num_gmac = <1>;
-			phy-mode = "rgmii-rxid";
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_orange: power {
-			label = "mr33:orange:power";
-			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
-			panic-indicator;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <1>;
-	qcom,poll_required = <1>;
-	vlan_tag = <0 0x20>;
-};
-
-&blsp1_i2c3 {
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	at24@50 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x50>;
-		read-only; /* This holds our MAC & Meraki board-data */
-	};
-};
-
-&blsp1_i2c4 {
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	led-controller@30 {
-		compatible = "ti,lp5562";
-		reg = <0x30>;
-		clock-mode = /bits/8 <2>;
-		enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
-
-		/* RGB led */
-		status_red: chan0 {
-			chan-name = "mr33:red:status";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-		};
-
-		status_green: chan1 {
-			chan-name = "mr33:green:status";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-		};
-
-		chan2 {
-			chan-name = "mr33:blue:status";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-		};
-
-		chan3 {
-			chan-name = "mr33:white:status";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "mibib";
-				reg = <0x00100000 0x00100000>;
-				read-only;
-			};
-			partition@200000 {
-				label = "bootconfig";
-				reg = <0x00200000 0x00100000>;
-				read-only;
-			};
-			partition@300000 {
-				label = "qsee";
-				reg = <0x00300000 0x00100000>;
-				read-only;
-			};
-			partition@400000 {
-				label = "qsee_alt";
-				reg = <0x00400000 0x00100000>;
-				read-only;
-			};
-			partition@500000 {
-				label = "cdt";
-				reg = <0x00500000 0x00080000>;
-				read-only;
-			};
-			partition@580000 {
-				label = "cdt_alt";
-				reg = <0x00580000 0x00080000>;
-				read-only;
-			};
-			partition@600000 {
-				label = "ddrparams";
-				reg = <0x00600000 0x00080000>;
-				read-only;
-			};
-			partition@700000 {
-				label = "u-boot";
-				reg = <0x00700000 0x00200000>;
-				read-only;
-			};
-			partition@900000 {
-				label = "u-boot-backup";
-				reg = <0x00900000 0x00200000>;
-				read-only;
-			};
-			partition@b00000 {
-				label = "ART";
-				reg = <0x00b00000 0x00080000>;
-				read-only;
-			};
-			partition@c00000 {
-				label = "ubi";
-				reg = <0x00c00000 0x07000000>;
-				/*
-				 * Do not try to allocate the remaining
-				 * 4 MiB to this ubi partition. It will
-				 * confuse the u-boot and it might not
-				 * find the kernel partition anymore.
-				 */
-			};
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-		};
-	};
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	/*
-	 * GPIO43 should be 0/1 whenever the unit is
-	 * powered through PoE or AC-Adapter.
-	 * That said, playing with this seems to
-	 * reset the AP.
-	 */
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_0_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	serial_1_pins: serial1_pinmux {
-		mux {
-			/* We use the i2c-0 pins for serial_1 */
-			pins = "gpio8", "gpio9";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-
-	i2c_0_pins: i2c_0_pinmux {
-		pinmux {
-			function = "blsp_i2c0";
-			pins = "gpio20", "gpio21";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c_1_pins: i2c_1_pinmux {
-		pinmux {
-			function = "blsp_i2c1";
-			pins = "gpio34", "gpio35";
-		};
-		pinconf {
-			pins = "gpio34", "gpio35";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		/*
-		 * There are 18 pins. 15 pins are common between LCD and NAND.
-		 * The QPIC controller arbitrates between LCD and NAND. Of the
-		 * remaining 4, 2 are for NAND and 2 are for LCD exclusively.
-		 *
-		 * The meraki source hints that the bluetooth module claims
-		 * pin 52 as well. But sadly, there's no data whenever this
-		 * is a NAND or LCD exclusive pin or not.
-		 */
-
-		pullups {
-			pins = "gpio52", "gpio53", "gpio58",
-				"gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Meraki-MR33";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Meraki-MR33";
-};
diff --git a/target/linux/ipq40xx/patches-4.19/070-v4.20-soc-qcom-spm-add-SCM-probe-dependency.patch b/target/linux/ipq40xx/patches-4.19/070-v4.20-soc-qcom-spm-add-SCM-probe-dependency.patch
deleted file mode 100644
index d0b520f389..0000000000
--- a/target/linux/ipq40xx/patches-4.19/070-v4.20-soc-qcom-spm-add-SCM-probe-dependency.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 61a3bd10082b0e861b4e1bc451a92e20181a52f5 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 23 Jul 2018 16:17:35 +0200
-Subject: [PATCH] soc: qcom: spm: add SCM probe dependency
-
-Check for SCM availability before attempting to use SPM. SPM probe will
-fail otherwise.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
----
- drivers/soc/qcom/spm.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/soc/qcom/spm.c
-+++ b/drivers/soc/qcom/spm.c
-@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
- 	cpumask_t mask;
- 	bool use_scm_power_down = false;
- 
-+	if (!qcom_scm_is_available())
-+		return -EPROBE_DEFER;
-+
- 	for (i = 0; ; i++) {
- 		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
- 		if (!state_node)
diff --git a/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch b/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch
deleted file mode 100644
index b1d69ca0ee..0000000000
--- a/target/linux/ipq40xx/patches-4.19/071-01-v4.20-ARM-dts-qcom-ipq4019-use-v2-of-the-kpss-bringup-mech.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 233c77d4f1d12e4337fba1146d5197f4c0f9107d Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Wed, 25 Jul 2018 10:37:45 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
-
-v1 was the incorrect choice here and sometimes the board
-would not come up properly.
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++--------
- 1 file changed, 17 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -52,7 +52,8 @@
- 		cpu@0 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a7";
--			enable-method = "qcom,kpss-acc-v1";
-+			enable-method = "qcom,kpss-acc-v2";
-+			next-level-cache = <&L2>;
- 			qcom,acc = <&acc0>;
- 			qcom,saw = <&saw0>;
- 			reg = <0x0>;
-@@ -71,7 +72,8 @@
- 		cpu@1 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a7";
--			enable-method = "qcom,kpss-acc-v1";
-+			enable-method = "qcom,kpss-acc-v2";
-+			next-level-cache = <&L2>;
- 			qcom,acc = <&acc1>;
- 			qcom,saw = <&saw1>;
- 			reg = <0x1>;
-@@ -90,7 +92,8 @@
- 		cpu@2 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a7";
--			enable-method = "qcom,kpss-acc-v1";
-+			enable-method = "qcom,kpss-acc-v2";
-+			next-level-cache = <&L2>;
- 			qcom,acc = <&acc2>;
- 			qcom,saw = <&saw2>;
- 			reg = <0x2>;
-@@ -109,7 +112,8 @@
- 		cpu@3 {
- 			device_type = "cpu";
- 			compatible = "arm,cortex-a7";
--			enable-method = "qcom,kpss-acc-v1";
-+			enable-method = "qcom,kpss-acc-v2";
-+			next-level-cache = <&L2>;
- 			qcom,acc = <&acc3>;
- 			qcom,saw = <&saw3>;
- 			reg = <0x3>;
-@@ -124,6 +128,11 @@
- 			>;
- 			clock-latency = <256000>;
- 		};
-+
-+		L2: l2-cache {
-+			compatible = "cache";
-+			cache-level = <2>;
-+		};
- 	};
- 
- 	pmu {
-@@ -292,22 +301,22 @@
- 		};
- 
-                 acc0: clock-controller@b088000 {
--                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
-                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
-                 };
- 
-                 acc1: clock-controller@b098000 {
--                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
-                         reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
-                 };
- 
-                 acc2: clock-controller@b0a8000 {
--                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
-                         reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
-                 };
- 
-                 acc3: clock-controller@b0b8000 {
--                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
-                         reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
-                 };
- 
diff --git a/target/linux/ipq40xx/patches-4.19/071-02-ipq40xx-Fix-booting-secondary-cores.patch b/target/linux/ipq40xx/patches-4.19/071-02-ipq40xx-Fix-booting-secondary-cores.patch
deleted file mode 100644
index d37a8cb6ba..0000000000
--- a/target/linux/ipq40xx/patches-4.19/071-02-ipq40xx-Fix-booting-secondary-cores.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 8a4540321e8bcf7a5b485c332a2e78f3501c78ed Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Thu, 29 Nov 2018 22:29:36 +0100
-Subject: [PATCH] ipq40xx: Fix booting secondary cores
-
-Add the second part of old 071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
-We dont modify the patch itself as its upstream and this change is not.
-
-Originally added by Mantas Pucka Mantas Pucka <mantas@8devices.com>
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -132,6 +132,7 @@
- 		L2: l2-cache {
- 			compatible = "cache";
- 			cache-level = <2>;
-+			qcom,saw = <&saw_l2>;
- 		};
- 	};
- 
-@@ -344,6 +345,12 @@
-                         regulator;
-                 };
- 
-+		saw_l2: regulator@b012000 {
-+			compatible = "qcom,saw2";
-+			reg = <0xb012000 0x1000>;
-+			regulator;
-+		};
-+
- 		blsp1_uart1: serial@78af000 {
- 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- 			reg = <0x78af000 0x200>;
diff --git a/target/linux/ipq40xx/patches-4.19/072-v4.20-ARM-dts-qcom-ipq4019-add-cpu-operating-points-for-cp.patch b/target/linux/ipq40xx/patches-4.19/072-v4.20-ARM-dts-qcom-ipq4019-add-cpu-operating-points-for-cp.patch
deleted file mode 100644
index 303546105e..0000000000
--- a/target/linux/ipq40xx/patches-4.19/072-v4.20-ARM-dts-qcom-ipq4019-add-cpu-operating-points-for-cp.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From bcb9ab4c2917e92114d2f4c2b1da97cdf15b471b Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Wed, 25 Jul 2018 10:37:46 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq
- support
-
-This adds some operating points for cpu frequeny scaling
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 54 ++++++++++++++---------------
- 1 file changed, 26 insertions(+), 28 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -59,14 +59,8 @@
- 			reg = <0x0>;
- 			clocks = <&gcc GCC_APPS_CLK_SRC>;
- 			clock-frequency = <0>;
--			operating-points = <
--				/* kHz	uV (fixed) */
--				48000	1100000
--				200000	1100000
--				500000	1100000
--				716000  1100000
--			>;
- 			clock-latency = <256000>;
-+			operating-points-v2 = <&cpu0_opp_table>;
- 		};
- 
- 		cpu@1 {
-@@ -79,14 +73,8 @@
- 			reg = <0x1>;
- 			clocks = <&gcc GCC_APPS_CLK_SRC>;
- 			clock-frequency = <0>;
--			operating-points = <
--				/* kHz	uV (fixed) */
--				48000	1100000
--				200000	1100000
--				500000	1100000
--				666000	1100000
--			>;
- 			clock-latency = <256000>;
-+			operating-points-v2 = <&cpu0_opp_table>;
- 		};
- 
- 		cpu@2 {
-@@ -99,14 +87,8 @@
- 			reg = <0x2>;
- 			clocks = <&gcc GCC_APPS_CLK_SRC>;
- 			clock-frequency = <0>;
--			operating-points = <
--				/* kHz	uV (fixed) */
--				48000	1100000
--				200000	1100000
--				500000	1100000
--				666000	1100000
--			>;
- 			clock-latency = <256000>;
-+			operating-points-v2 = <&cpu0_opp_table>;
- 		};
- 
- 		cpu@3 {
-@@ -119,14 +101,8 @@
- 			reg = <0x3>;
- 			clocks = <&gcc GCC_APPS_CLK_SRC>;
- 			clock-frequency = <0>;
--			operating-points = <
--				/* kHz	uV (fixed) */
--				48000	1100000
--				200000	1100000
--				500000	1100000
--				666000	1100000
--			>;
- 			clock-latency = <256000>;
-+			operating-points-v2 = <&cpu0_opp_table>;
- 		};
- 
- 		L2: l2-cache {
-@@ -136,6 +112,28 @@
- 		};
- 	};
- 
-+	cpu0_opp_table: opp_table0 {
-+		compatible = "operating-points-v2";
-+		opp-shared;
-+
-+		opp-48000000 {
-+			opp-hz = /bits/ 64 <48000000>;
-+			clock-latency-ns = <256000>;
-+		};
-+		opp-200000000 {
-+			opp-hz = /bits/ 64 <200000000>;
-+			clock-latency-ns = <256000>;
-+		};
-+		opp-500000000 {
-+			opp-hz = /bits/ 64 <500000000>;
-+			clock-latency-ns = <256000>;
-+		};
-+		opp-716000000 {
-+			opp-hz = /bits/ 64 <716000000>;
-+			clock-latency-ns = <256000>;
-+ 		};
-+	};
-+
- 	pmu {
- 		compatible = "arm,cortex-a7-pmu";
- 		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
diff --git a/target/linux/ipq40xx/patches-4.19/073-v4.20-ARM-dts-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch b/target/linux/ipq40xx/patches-4.19/073-v4.20-ARM-dts-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch
deleted file mode 100644
index 7573e4897f..0000000000
--- a/target/linux/ipq40xx/patches-4.19/073-v4.20-ARM-dts-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From bd73a3dd257fb838bd456a18eeee0ef0224b7a40 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Wed, 25 Jul 2018 10:37:47 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
-
-while compiling an ipq4019 target, dtc will complain:
-regulator@b089000 unit address format error, expected "2089000"
-
-The saw0 regulator reg value seems to be
-copied and pasted from qcom-ipq8064.dtsi.
-
-This patch fixes the reg value to match that of the
-unit address which in turn silences the warning.
-(There is no driver for qcom,saw2 right now.
-So this went unnoticed)
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -321,7 +321,7 @@
- 
-                 saw0: regulator@b089000 {
-                         compatible = "qcom,saw2";
--                        reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
-+			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-                         regulator;
-                 };
- 
diff --git a/target/linux/ipq40xx/patches-4.19/074-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq40xx/patches-4.19/074-ARM-qcom-Add-IPQ4019-SoC-support.patch
deleted file mode 100644
index 76fcdc6ab1..0000000000
--- a/target/linux/ipq40xx/patches-4.19/074-ARM-qcom-Add-IPQ4019-SoC-support.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 22 Jul 2018 12:07:57 +0200
-Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support
-
-Add support for the Qualcomm Atheros IPQ4019 SoC.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/Makefile          | 1 +
- arch/arm/mach-qcom/Kconfig | 5 +++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -150,6 +150,7 @@ textofs-$(CONFIG_ARCH_MSM8X60) := 0x0020
- textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
- textofs-$(CONFIG_ARCH_MESON) := 0x00208000
- textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
-+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
- 
- # Machine directory name.  This list is sorted alphanumerically
- # by CONFIG_* macro name.
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -27,4 +27,9 @@ config ARCH_MDM9615
- 	bool "Enable support for MDM9615"
- 	select CLKSRC_QCOM
- 
-+config ARCH_IPQ40XX
-+	bool "Enable support for IPQ40XX"
-+	select CLKSRC_QCOM
-+	select HAVE_ARM_ARCH_TIMER
-+
- endif
diff --git a/target/linux/ipq40xx/patches-4.19/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch b/target/linux/ipq40xx/patches-4.19/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch
deleted file mode 100644
index e7407bcbab..0000000000
--- a/target/linux/ipq40xx/patches-4.19/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 15:09:36 +0200
-Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
-
-This patch adds the binding documentation for the HS/SS USB PHY found
-inside Qualcom Dakota SoCs.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../bindings/phy/phy-qcom-ipq4019-usb.txt           | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
-@@ -0,0 +1,21 @@
-+Qualcom Dakota HS/SS USB PHY
-+
-+Required properties:
-+ - compatible: "qcom,usb-ss-ipq4019-phy",
-+	       "qcom,usb-hs-ipq4019-phy"
-+ - reg: offset and length of the registers
-+ - #phy-cells: should be 0
-+ - resets: the reset controllers as listed below
-+ - reset-names: the names of the reset controllers
-+	"por_rst" - the POR reset line for SS and HS phys
-+	"srif_rst" - the SRIF reset line for HS phys
-+Example:
-+
-+hsphy@a8000 {
-+	compatible = "qcom,usb-hs-ipq4019-phy";
-+	phy-cells = <0>;
-+	reg = <0xa8000 0x40>;
-+	resets = <&gcc USB2_HSPHY_POR_ARES>,
-+		 <&gcc USB2_HSPHY_S_ARES>;
-+	reset-names = "por_rst", "srif_rst";
-+};
diff --git a/target/linux/ipq40xx/patches-4.19/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch b/target/linux/ipq40xx/patches-4.19/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch
deleted file mode 100644
index e7e7a1f89a..0000000000
--- a/target/linux/ipq40xx/patches-4.19/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 14:45:49 +0200
-Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019
-
-Add a driver to setup the USB phy on Qualcom Dakota SoCs.
-The driver sets up HS and SS phys. In case of HS some magic values need to
-be written to magic offsets. These were taken from the SDK driver.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/phy/qualcomm/Kconfig                |   7 ++
- drivers/phy/qualcomm/Makefile               |   1 +
- drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++
- 3 files changed, 196 insertions(+)
- create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
-@@ -17,6 +17,13 @@ config PHY_QCOM_APQ8064_SATA
- 	depends on OF
- 	select GENERIC_PHY
- 
-+config PHY_QCOM_IPQ4019_USB
-+	tristate "Qualcomm IPQ4019 USB PHY module"
-+	depends on OF && ARCH_QCOM
-+	select GENERIC_PHY
-+	help
-+	  Support for the USB PHY on QCOM IPQ4019/Dakota chipsets.
-+
- config PHY_QCOM_IPQ806X_SATA
- 	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
- 	depends on ARCH_QCOM
---- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-@@ -0,0 +1,188 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * Based on code from
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/of_platform.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+/*
-+ * Magic registers copied from the SDK driver code
-+ */
-+#define PHY_CTRL0_ADDR	0x000
-+#define PHY_CTRL1_ADDR	0x004
-+#define PHY_CTRL2_ADDR	0x008
-+#define PHY_CTRL3_ADDR	0x00C
-+#define PHY_CTRL4_ADDR	0x010
-+#define PHY_MISC_ADDR	0x024
-+#define PHY_IPG_ADDR	0x030
-+
-+#define PHY_CTRL0_VAL	0xA4600015
-+#define PHY_CTRL1_VAL	0x09500000
-+#define PHY_CTRL2_VAL	0x00058180
-+#define PHY_CTRL3_VAL	0x6DB6DCD6
-+#define PHY_CTRL4_VAL	0x836DB6DB
-+#define PHY_MISC_VAL	0x3803FB0C
-+#define PHY_IPG_VAL	0x47323232
-+
-+struct ipq4019_usb_phy {
-+	struct device		*dev;
-+	struct phy		*phy;
-+	void __iomem		*base;
-+	struct reset_control	*por_rst;
-+	struct reset_control	*srif_rst;
-+};
-+
-+static int ipq4019_ss_phy_power_off(struct phy *_phy)
-+{
-+	struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+	reset_control_assert(phy->por_rst);
-+	msleep(10);
-+
-+	return 0;
-+}
-+
-+static int ipq4019_ss_phy_power_on(struct phy *_phy)
-+{
-+	struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+	ipq4019_ss_phy_power_off(_phy);
-+
-+	reset_control_deassert(phy->por_rst);
-+
-+	return 0;
-+}
-+
-+static struct phy_ops ipq4019_usb_ss_phy_ops = {
-+	.power_on	= ipq4019_ss_phy_power_on,
-+	.power_off	= ipq4019_ss_phy_power_off,
-+};
-+
-+static int ipq4019_hs_phy_power_off(struct phy *_phy)
-+{
-+	struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+	reset_control_assert(phy->por_rst);
-+	msleep(10);
-+
-+	reset_control_assert(phy->srif_rst);
-+	msleep(10);
-+
-+	return 0;
-+}
-+
-+static int ipq4019_hs_phy_power_on(struct phy *_phy)
-+{
-+	struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+	ipq4019_hs_phy_power_off(_phy);
-+
-+	reset_control_deassert(phy->srif_rst);
-+	msleep(10);
-+
-+	writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
-+	writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
-+	writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
-+	writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
-+	writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
-+	writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
-+	writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
-+	msleep(10);
-+
-+	reset_control_deassert(phy->por_rst);
-+
-+	return 0;
-+}
-+
-+static struct phy_ops ipq4019_usb_hs_phy_ops = {
-+	.power_on	= ipq4019_hs_phy_power_on,
-+	.power_off	= ipq4019_hs_phy_power_off,
-+};
-+
-+static const struct of_device_id ipq4019_usb_phy_of_match[] = {
-+	{ .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops},
-+	{ .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops},
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match);
-+
-+static int ipq4019_usb_phy_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct resource *res;
-+	struct phy_provider *phy_provider;
-+	struct ipq4019_usb_phy *phy;
-+	const struct of_device_id *match;
-+
-+	match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev);
-+	if (!match)
-+		return -ENODEV;
-+
-+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
-+	if (!phy)
-+		return -ENOMEM;
-+
-+	phy->dev = &pdev->dev;
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	phy->base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(phy->base)) {
-+		dev_err(dev, "failed to remap register memory\n");
-+		return PTR_ERR(phy->base);
-+	}
-+
-+	phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
-+	if (IS_ERR(phy->por_rst)) {
-+		if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER)
-+			dev_err(dev, "POR reset is missing\n");
-+		return PTR_ERR(phy->por_rst);
-+	}
-+
-+	phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst");
-+	if (IS_ERR(phy->srif_rst))
-+		return PTR_ERR(phy->srif_rst);
-+
-+	phy->phy = devm_phy_create(dev, NULL, match->data);
-+	if (IS_ERR(phy->phy)) {
-+		dev_err(dev, "failed to create PHY\n");
-+		return PTR_ERR(phy->phy);
-+	}
-+	phy_set_drvdata(phy->phy, phy);
-+
-+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-+
-+	return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static struct platform_driver ipq4019_usb_phy_driver = {
-+	.probe	= ipq4019_usb_phy_probe,
-+	.driver = {
-+		.of_match_table	= ipq4019_usb_phy_of_match,
-+		.name  = "ipq4019-usb-phy",
-+	}
-+};
-+module_platform_driver(ipq4019_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
-+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_PHY_ATH79_USB)		+= phy-ath79-usb.o
- obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
-+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB)	+= phy-qcom-ipq4019-usb.o
- obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
- obj-$(CONFIG_PHY_QCOM_QMP)		+= phy-qcom-qmp.o
- obj-$(CONFIG_PHY_QCOM_QUSB2)		+= phy-qcom-qusb2.o
diff --git a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
deleted file mode 100644
index ff6fb4b576..0000000000
--- a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 14:47:55 +0200
-Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes
-
-This patch makes USB work on the Dakota EVB.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
- arch/arm/boot/dts/qcom-ipq4019.dtsi           | 74 +++++++++++++++++++++++++++
- 2 files changed, 94 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -109,5 +109,25 @@
- 		wifi@a800000 {
- 			status = "ok";
- 		};
-+
-+		usb3_ss_phy: ssphy@9a000 {
-+			status = "ok";
-+		};
-+
-+		usb3_hs_phy: hsphy@a6000 {
-+			status = "ok";
-+		};
-+
-+		usb3: usb3@8af8800 {
-+			status = "ok";
-+		};
-+
-+		usb2_hs_phy: hsphy@a8000 {
-+			status = "ok";
-+		};
-+
-+		usb2: usb2@60f8800 {
-+			status = "ok";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -564,5 +564,79 @@
- 					  "legacy";
- 			status = "disabled";
- 		};
-+
-+		usb3_ss_phy: ssphy@9a000 {
-+			compatible = "qcom,usb-ss-ipq4019-phy";
-+			#phy-cells = <0>;
-+			reg = <0x9a000 0x800>;
-+			reg-names = "phy_base";
-+			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
-+			reset-names = "por_rst";
-+			status = "disabled";
-+		};
-+
-+		usb3_hs_phy: hsphy@a6000 {
-+			compatible = "qcom,usb-hs-ipq4019-phy";
-+			#phy-cells = <0>;
-+			reg = <0xa6000 0x40>;
-+			reg-names = "phy_base";
-+			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
-+			reset-names = "por_rst", "srif_rst";
-+			status = "disabled";
-+		};
-+
-+		usb3@8af8800 {
-+			compatible = "qcom,dwc3";
-+			reg = <0x8af8800 0x100>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			clocks = <&gcc GCC_USB3_MASTER_CLK>,
-+				 <&gcc GCC_USB3_SLEEP_CLK>,
-+				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-+			clock-names = "master", "sleep", "mock_utmi";
-+			ranges;
-+			status = "disabled";
-+
-+			dwc3@8a00000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x8a00000 0xf8000>;
-+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-+				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
-+				phy-names = "usb2-phy", "usb3-phy";
-+				dr_mode = "host";
-+			};
-+		};
-+
-+		usb2_hs_phy: hsphy@a8000 {
-+			compatible = "qcom,usb-hs-ipq4019-phy";
-+			#phy-cells = <0>;
-+			reg = <0xa8000 0x40>;
-+			reg-names = "phy_base";
-+			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
-+			reset-names = "por_rst", "srif_rst";
-+			status = "disabled";
-+		};
-+
-+		usb2@60f8800 {
-+			compatible = "qcom,dwc3";
-+			reg = <0x60f8800 0x100>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			clocks = <&gcc GCC_USB2_MASTER_CLK>,
-+				 <&gcc GCC_USB2_SLEEP_CLK>,
-+				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-+			clock-names = "master", "sleep", "mock_utmi";
-+			ranges;
-+			status = "disabled";
-+
-+			dwc3@6000000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x6000000 0xf8000>;
-+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+				phys = <&usb2_hs_phy>;
-+				phy-names = "usb2-phy";
-+				dr_mode = "host";
-+			};
-+		};
- 	};
- };
diff --git a/target/linux/ipq40xx/patches-4.19/079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch b/target/linux/ipq40xx/patches-4.19/079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch
deleted file mode 100644
index 6bfea2a5c2..0000000000
--- a/target/linux/ipq40xx/patches-4.19/079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From da89f500cb55fb3f19c4b399b46d8add0abbd4d6 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Wed, 25 Jul 2018 10:37:48 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: fix PCI range
-
-The PCI range is invalid and PCI attached devices doen't work.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Andy Gross <andy.gross@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -401,7 +401,7 @@
- 			#size-cells = <2>;
- 
- 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
--				  0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
-+				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
- 
- 			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
- 			interrupt-names = "msi";
diff --git a/target/linux/ipq40xx/patches-4.19/080-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-4.19/080-ARM-dts-qcom-add-gpio-ranges-property.patch
deleted file mode 100644
index 67522f5cf2..0000000000
--- a/target/linux/ipq40xx/patches-4.19/080-ARM-dts-qcom-add-gpio-ranges-property.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From patchwork Mon May 21 20:57:38 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property
-X-Patchwork-Submitter: Christian Lamparter <chunkeey@gmail.com>
-X-Patchwork-Id: 917856
-Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com>
-To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
-Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
- Linus Walleij <linus.walleij@linaro.org>,
- Stephen Boyd <sboyd@kernel.org>, David Brown <david.brown@linaro.org>,
- Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Andy Gross <andy.gross@linaro.org>,
- Sven Eckelmann <sven.eckelmann@openmesh.com>
-Date: Mon, 21 May 2018 22:57:38 +0200
-From: Christian Lamparter <chunkeey@gmail.com>
-List-Id: <linux-gpio.vger.kernel.org>
-
-This patch adds the gpio-ranges property to almost all of
-the Qualcomm ARM platforms that utilize the pinctrl-msm
-framework.
-
-The gpio-ranges property is part of the gpiolib subsystem.
-As a result, the binding text is available in section
-"2.1 gpio- and pin-controller interaction" of
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-For more information please see the patch titled:
-"pinctrl: msm: fix gpio-hog related boot issues" from
-this series.
-
-Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
----
-To help with git bisect, the DT update patch has been intentionally
-placed after the "pinctrl: msm: fix gpio-hog related boot issues".
-Otherwise - if the order was reveresed - and bisect decides to split
-between these two patches, the gpiochip_add_pin_ranges() function
-will be executed twice with the same parameters for the same pinctrl.
----
- arch/arm/boot/dts/qcom-apq8064.dtsi   | 1 +
- arch/arm/boot/dts/qcom-apq8084.dtsi   | 1 +
- arch/arm/boot/dts/qcom-ipq4019.dtsi   | 1 +
- arch/arm/boot/dts/qcom-ipq8064.dtsi   | 1 +
- arch/arm/boot/dts/qcom-mdm9615.dtsi   | 1 +
- arch/arm/boot/dts/qcom-msm8660.dtsi   | 1 +
- arch/arm/boot/dts/qcom-msm8960.dtsi   | 1 +
- arch/arm/boot/dts/qcom-msm8974.dtsi   | 1 +
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++-
- arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
- 13 files changed, 14 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -202,6 +202,7 @@
- 			compatible = "qcom,ipq4019-pinctrl";
- 			reg = <0x01000000 0x300000>;
- 			gpio-controller;
-+			gpio-ranges = <&tlmm 0 0 100>;
- 			#gpio-cells = <2>;
- 			interrupt-controller;
- 			#interrupt-cells = <2>;
diff --git a/target/linux/ipq40xx/patches-4.19/081-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-4.19/081-clk-fix-apss-cpu-overclocking.patch
deleted file mode 100644
index de99792541..0000000000
--- a/target/linux/ipq40xx/patches-4.19/081-clk-fix-apss-cpu-overclocking.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Sun, 11 Mar 2018 14:41:31 +0100
-Subject: [PATCH 2/2] clk: fix apss cpu overclocking
-
-There's an interaction issue between the clk changes:"
-clk: qcom: ipq4019: Add the apss cpu pll divider clock node
-clk: qcom: ipq4019: remove fixed clocks and add pll clocks
-" and the cpufreq-dt.
-
-cpufreq-dt is now spamming the kernel-log with the following:
-
-[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP
-for freq 761142857 (-34)
-
-This only happens on certain devices like the Compex WPJ428
-and AVM FritzBox!4040. However, other devices like the Asus
-RT-AC58U and Meraki MR33 work just fine.
-
-The issue stem from the fact that all higher CPU-Clocks
-are achieved by switching the clock-parent to the P_DDRPLLAPSS
-(ddrpllapss). Which is set by Qualcomm's proprietary bootcode
-as part of the DDR calibration.
-
-For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked
-at round 533 MHz (ddrpllsdcc = 190285714 Hz).
-
-whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is
-clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz).
-
-This patch attempts to fix the issue by modifying
-clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate()
-to use a new qcom_find_freq_close() function, which returns the closest
-matching frequency, instead of the next higher. This way, the SoC in
-the FB4040 (with its max clock speed of 710.4 MHz) will no longer
-try to overclock to 761 MHz.
-
-Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node")
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++---
- 1 file changed, 31 insertions(+), 3 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq4019.c
-+++ b/drivers/clk/qcom/gcc-ipq4019.c
-@@ -1251,6 +1251,29 @@ static const struct clk_fepll_vco gcc_fe
- 	.reg = 0x2f020,
- };
- 
-+
-+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f,
-+					     unsigned long rate)
-+{
-+	const struct freq_tbl *last = NULL;
-+
-+	for ( ; f->freq; f++) {
-+		if (rate == f->freq)
-+			return f;
-+
-+		if (f->freq > rate) {
-+			if (!last ||
-+			   (f->freq - rate) < (rate - last->freq))
-+				return f;
-+			else
-+				return last;
-+		}
-+		last = f;
-+	}
-+
-+	return last;
-+}
-+
- /*
-  * Round rate function for APSS CPU PLL Clock divider.
-  * It looks up the frequency table and returns the next higher frequency
-@@ -1263,7 +1286,7 @@ static long clk_cpu_div_round_rate(struc
- 	struct clk_hw *p_hw;
- 	const struct freq_tbl *f;
- 
--	f = qcom_find_freq(pll->freq_tbl, rate);
-+	f = qcom_find_freq_close(pll->freq_tbl, rate);
- 	if (!f)
- 		return -EINVAL;
- 
-@@ -1286,7 +1309,7 @@ static int clk_cpu_div_set_rate(struct c
- 	u32 mask;
- 	int ret;
- 
--	f = qcom_find_freq(pll->freq_tbl, rate);
-+	f = qcom_find_freq_close(pll->freq_tbl, rate);
- 	if (!f)
- 		return -EINVAL;
- 
-@@ -1313,6 +1336,7 @@ static unsigned long
- clk_cpu_div_recalc_rate(struct clk_hw *hw,
- 			unsigned long parent_rate)
- {
-+	const struct freq_tbl *f;
- 	struct clk_fepll *pll = to_clk_fepll(hw);
- 	u32 cdiv, pre_div;
- 	u64 rate;
-@@ -1333,7 +1357,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
- 	rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
- 	do_div(rate, pre_div);
- 
--	return rate;
-+	f = qcom_find_freq_close(pll->freq_tbl, rate);
-+	if (!f)
-+		return rate;
-+
-+	return f->freq;
- };
- 
- static const struct clk_ops clk_regmap_cpu_div_ops = {
diff --git a/target/linux/ipq40xx/patches-4.19/082-v4.20-mtd-spinand-winbond-Add-support-for-W25N01GV.patch b/target/linux/ipq40xx/patches-4.19/082-v4.20-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
deleted file mode 100644
index 22bd985124..0000000000
--- a/target/linux/ipq40xx/patches-4.19/082-v4.20-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 342fc01bfd6d717602c71d96d3ef40a36e45e060 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 5 Oct 2018 09:02:50 +0200
-Subject: [PATCH] mtd: spinand: winbond: Add support for W25N01GV
-
-W25N01GV is a single die version of the already supported
-W25M02GV with half the capacity. Everything else is the
-same so introduce support for W25N01GV.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/mtd/nand/spi/winbond.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/nand/spi/winbond.c
-+++ b/drivers/mtd/nand/spi/winbond.c
-@@ -84,6 +84,14 @@ static const struct spinand_info winbond
- 		     0,
- 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
- 		     SPINAND_SELECT_TARGET(w25m02gv_select_target)),
-+	SPINAND_INFO("W25N01GV", 0xAA,
-+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
-+		     NAND_ECCREQ(1, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
- };
- 
- /**
diff --git a/target/linux/ipq40xx/patches-4.19/083-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch b/target/linux/ipq40xx/patches-4.19/083-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch
deleted file mode 100644
index acea3fb90c..0000000000
--- a/target/linux/ipq40xx/patches-4.19/083-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Mon, 25 Feb 2019 20:14:19 +0100
-Subject: [PATCH] ARM: dts: qcom: ipq4019: enlarge PCIe BAR range
-
-David Bauer reported that the VDSL modem (attached via PCIe)
-on his AVM Fritz!Box 7530 was complaining about not having
-enough space in the BAR. A closer inspection of the old
-qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed:
-
-| qcom,pcie@80000 {
-|	compatible = "qcom,msm_pcie";
-|	reg = <0x80000 0x2000>,
-|	      <0x99000 0x800>,
-|	      <0x40000000 0xf1d>,
-|	      <0x40000f20 0xa8>,
-|	      <0x40100000 0x1000>,
-|	      <0x40200000 0x100000>,
-|	      <0x40300000 0xd00000>;
-|	reg-names = "parf", "phy", "dm_core", "elbi",
-|			"conf", "io", "bars";
-
-Matching the reg-names with the listed reg leads to
-<0xd00000> as the size for the "bars".
-
-BugLink: https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg45212.html
-Reported-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -401,8 +401,8 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 
--			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
--				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
-+			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-+				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
- 
- 			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
- 			interrupt-names = "msi";
diff --git a/target/linux/ipq40xx/patches-4.19/084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch b/target/linux/ipq40xx/patches-4.19/084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch
deleted file mode 100644
index 7864ef7fdf..0000000000
--- a/target/linux/ipq40xx/patches-4.19/084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Niklas Cassel <niklas.cassel@linaro.org>
-Subject: [PATCH] ARM: dts: qcom: ipq4019: Fix MSI IRQ type
-Date: Thu, 24 Jan 2019 14:00:47 +0100
-
-The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level
-triggered interrupt.
-
-The msi_ctrl_int will be high for as long as any MSI status bit is set,
-thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the
-IRQ handler to keep getting called, as long as any MSI status bit is set.
-
-A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has
-configured this IRQ incorrectly.
-
-Not having the correct IRQ type defined will cause us to lose interrupts,
-which in turn causes timeouts in the PCIe endpoint drivers.
-
-Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -404,7 +404,7 @@
- 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
- 				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
- 
--			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
-+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
- 			interrupt-names = "msi";
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 0x7>;
diff --git a/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch b/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch
deleted file mode 100644
index bcc6f65661..0000000000
--- a/target/linux/ipq40xx/patches-4.19/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1092,6 +1092,7 @@ static const struct flash_info spi_nor_i
- 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{ "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
- 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-@@ -1274,11 +1275,12 @@ static const struct flash_info spi_nor_i
- 	{ },
- };
- 
--static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
-+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor,
-+						const char *name)
- {
- 	int			tmp;
- 	u8			id[SPI_NOR_MAX_ID_LEN];
--	const struct flash_info	*info;
-+	const struct flash_info	*info, *first_match = NULL;
- 
- 	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
- 	if (tmp < 0) {
-@@ -1289,10 +1291,16 @@ static const struct flash_info *spi_nor_
- 	for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
- 		info = &spi_nor_ids[tmp];
- 		if (info->id_len) {
--			if (!memcmp(info->id, id, info->id_len))
--				return &spi_nor_ids[tmp];
-+			if (!memcmp(info->id, id, info->id_len)) {
-+				if (!name || !strcmp(name, info->name))
-+					return info;
-+				if (!first_match)
-+					first_match = info;
-+			}
- 		}
- 	}
-+	if (first_match)
-+		return first_match;
- 	dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
- 		id[0], id[1], id[2]);
- 	return ERR_PTR(-ENODEV);
-@@ -2826,7 +2834,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 		info = spi_nor_match_id(name);
- 	/* Try to auto-detect if chip name wasn't specified or not found */
- 	if (!info)
--		info = spi_nor_read_id(nor);
-+		info = spi_nor_read_id(nor, NULL);
- 	if (IS_ERR_OR_NULL(info))
- 		return -ENOENT;
- 
-@@ -2837,7 +2845,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	if (name && info->id_len) {
- 		const struct flash_info *jinfo;
- 
--		jinfo = spi_nor_read_id(nor);
-+		jinfo = spi_nor_read_id(nor, name);
- 		if (IS_ERR(jinfo)) {
- 			return PTR_ERR(jinfo);
- 		} else if (jinfo != info) {
diff --git a/target/linux/ipq40xx/patches-4.19/700-net-add-qualcomm-mdio-and-phy.patch b/target/linux/ipq40xx/patches-4.19/700-net-add-qualcomm-mdio-and-phy.patch
deleted file mode 100644
index bad8b797f8..0000000000
--- a/target/linux/ipq40xx/patches-4.19/700-net-add-qualcomm-mdio-and-phy.patch
+++ /dev/null
@@ -1,2690 +0,0 @@
-From 5a71a2005a2e1e6bbe36f00386c495ad6626beb2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 19 Jan 2017 01:59:43 +0100
-Subject: [PATCH 30/38] NET: add qualcomm mdio and PHY
-
----
- drivers/net/phy/Kconfig  | 14 ++++++++++++++
- drivers/net/phy/Makefile |  2 ++
- 2 files changed, 16 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -519,6 +519,20 @@ config XILINX_GMII2RGMII
- 	  the Reduced Gigabit Media Independent Interface(RGMII) between
- 	  Ethernet physical media devices and the Gigabit Ethernet controller.
- 
-+config MDIO_IPQ40XX
-+	tristate "Qualcomm Atheros ipq40xx MDIO interface"
-+	depends on HAS_IOMEM && OF
-+	---help---
-+	  This driver supports the MDIO interface found in Qualcomm
-+	  Atheros ipq40xx Soc chip.
-+
-+config AR40XX_PHY
-+	tristate "Driver for Qualcomm Atheros IPQ40XX switches"
-+	depends on HAS_IOMEM && OF
-+	select SWCONFIG
-+	---help---
-+	   This is the driver for Qualcomm Atheros IPQ40XX ESS switches.
-+
- endif # PHYLIB
- 
- config MICREL_KS8995MA
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium
- obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
- obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
- obj-$(CONFIG_MDIO_I2C)		+= mdio-i2c.o
-+obj-$(CONFIG_MDIO_IPQ40XX)	+= mdio-ipq40xx.o
- obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
- obj-$(CONFIG_MDIO_MSCC_MIIM)	+= mdio-mscc-miim.o
- obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
-@@ -61,6 +62,7 @@ obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
- 
- obj-$(CONFIG_AMD_PHY)		+= amd.o
- obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
-+obj-$(CONFIG_AR40XX_PHY)	+= ar40xx.o
- obj-$(CONFIG_ASIX_PHY)		+= asix.o
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
- obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
---- /dev/null
-+++ b/drivers/net/phy/ar40xx.c
-@@ -0,0 +1,2090 @@
-+/*
-+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/list.h>
-+#include <linux/bitops.h>
-+#include <linux/switch.h>
-+#include <linux/delay.h>
-+#include <linux/phy.h>
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+#include <linux/lockdep.h>
-+#include <linux/workqueue.h>
-+#include <linux/of_device.h>
-+#include <linux/of_address.h>
-+#include <linux/mdio.h>
-+#include <linux/gpio.h>
-+
-+#include "ar40xx.h"
-+
-+static struct ar40xx_priv *ar40xx_priv;
-+
-+#define MIB_DESC(_s , _o, _n)	\
-+	{			\
-+		.size = (_s),	\
-+		.offset = (_o),	\
-+		.name = (_n),	\
-+	}
-+
-+static const struct ar40xx_mib_desc ar40xx_mibs[] = {
-+	MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"),
-+	MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"),
-+	MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"),
-+	MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"),
-+	MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"),
-+	MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"),
-+	MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"),
-+	MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"),
-+	MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"),
-+	MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"),
-+	MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"),
-+	MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"),
-+	MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"),
-+	MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"),
-+	MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"),
-+	MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"),
-+	MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"),
-+	MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"),
-+	MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"),
-+	MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"),
-+	MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"),
-+	MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"),
-+	MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"),
-+	MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"),
-+	MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"),
-+	MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"),
-+	MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"),
-+	MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"),
-+	MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"),
-+	MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"),
-+	MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"),
-+	MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"),
-+	MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"),
-+	MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"),
-+	MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"),
-+	MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"),
-+	MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"),
-+	MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"),
-+	MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"),
-+};
-+
-+static u32
-+ar40xx_read(struct ar40xx_priv *priv, int reg)
-+{
-+	return readl(priv->hw_addr + reg);
-+}
-+
-+static u32
-+ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg)
-+{
-+	return readl(priv->psgmii_hw_addr + reg);
-+}
-+
-+static void
-+ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val)
-+{
-+	writel(val, priv->hw_addr + reg);
-+}
-+
-+static u32
-+ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
-+{
-+	u32 ret;
-+
-+	ret = ar40xx_read(priv, reg);
-+	ret &= ~mask;
-+	ret |= val;
-+	ar40xx_write(priv, reg, ret);
-+	return ret;
-+}
-+
-+static void
-+ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val)
-+{
-+	writel(val, priv->psgmii_hw_addr + reg);
-+}
-+
-+static void
-+ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr,
-+		     u16 dbg_addr, u16 dbg_data)
-+{
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
-+	bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data);
-+	mutex_unlock(&bus->mdio_lock);
-+}
-+
-+static void
-+ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr,
-+		    u16 dbg_addr, u16 *dbg_data)
-+{
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
-+	*dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA);
-+	mutex_unlock(&bus->mdio_lock);
-+}
-+
-+static void
-+ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id,
-+		     u16 mmd_num, u16 reg_id, u16 reg_val)
-+{
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	bus->write(bus, phy_id,
-+			AR40XX_MII_ATH_MMD_ADDR, mmd_num);
-+	bus->write(bus, phy_id,
-+			AR40XX_MII_ATH_MMD_DATA, reg_id);
-+	bus->write(bus, phy_id,
-+			AR40XX_MII_ATH_MMD_ADDR,
-+			0x4000 | mmd_num);
-+	bus->write(bus, phy_id,
-+		AR40XX_MII_ATH_MMD_DATA, reg_val);
-+	mutex_unlock(&bus->mdio_lock);
-+}
-+
-+static u16
-+ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id,
-+		    u16 mmd_num, u16 reg_id)
-+{
-+	u16 value;
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	bus->write(bus, phy_id,
-+			AR40XX_MII_ATH_MMD_ADDR, mmd_num);
-+	bus->write(bus, phy_id,
-+			AR40XX_MII_ATH_MMD_DATA, reg_id);
-+	bus->write(bus, phy_id,
-+			AR40XX_MII_ATH_MMD_ADDR,
-+			0x4000 | mmd_num);
-+	value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA);
-+	mutex_unlock(&bus->mdio_lock);
-+	return value;
-+}
-+
-+/* Start of swconfig support */
-+
-+static void
-+ar40xx_phy_poll_reset(struct ar40xx_priv *priv)
-+{
-+	u32 i, in_reset, retries = 500;
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	/* Assume RESET was recently issued to some or all of the phys */
-+	in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0);
-+
-+	while (retries--) {
-+		/* 1ms should be plenty of time.
-+		 * 802.3 spec allows for a max wait time of 500ms
-+		 */
-+		usleep_range(1000, 2000);
-+
-+		for (i = 0; i < AR40XX_NUM_PHYS; i++) {
-+			int val;
-+
-+			/* skip devices which have completed reset */
-+			if (!(in_reset & BIT(i)))
-+				continue;
-+
-+			val = mdiobus_read(bus, i, MII_BMCR);
-+			if (val < 0)
-+				continue;
-+
-+			/* mark when phy is no longer in reset state */
-+			if (!(val & BMCR_RESET))
-+				in_reset &= ~BIT(i);
-+		}
-+
-+		if (!in_reset)
-+			return;
-+	}
-+
-+	dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n",
-+		 in_reset);
-+}
-+
-+static void
-+ar40xx_phy_init(struct ar40xx_priv *priv)
-+{
-+	int i;
-+	struct mii_bus *bus;
-+	u16 val;
-+
-+	bus = priv->mii_bus;
-+	for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
-+		ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
-+		val &= ~AR40XX_PHY_MANU_CTRL_EN;
-+		ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
-+		mdiobus_write(bus, i,
-+			      MII_ADVERTISE, ADVERTISE_ALL |
-+			      ADVERTISE_PAUSE_CAP |
-+			      ADVERTISE_PAUSE_ASYM);
-+		mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
-+		mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-+	}
-+
-+	ar40xx_phy_poll_reset(priv);
-+}
-+
-+static void
-+ar40xx_port_phy_linkdown(struct ar40xx_priv *priv)
-+{
-+	struct mii_bus *bus;
-+	int i;
-+	u16 val;
-+
-+	bus = priv->mii_bus;
-+	for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
-+		mdiobus_write(bus, i, MII_CTRL1000, 0);
-+		mdiobus_write(bus, i, MII_ADVERTISE, 0);
-+		mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-+		ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
-+		val |= AR40XX_PHY_MANU_CTRL_EN;
-+		ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
-+		/* disable transmit */
-+		ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val);
-+		val &= 0xf00f;
-+		ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val);
-+	}
-+}
-+
-+static void
-+ar40xx_set_mirror_regs(struct ar40xx_priv *priv)
-+{
-+	int port;
-+
-+	/* reset all mirror registers */
-+	ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
-+		   AR40XX_FWD_CTRL0_MIRROR_PORT,
-+		   (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
-+	for (port = 0; port < AR40XX_NUM_PORTS; port++) {
-+		ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port),
-+			   AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0);
-+
-+		ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port),
-+			   AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0);
-+	}
-+
-+	/* now enable mirroring if necessary */
-+	if (priv->source_port >= AR40XX_NUM_PORTS ||
-+	    priv->monitor_port >= AR40XX_NUM_PORTS ||
-+	    priv->source_port == priv->monitor_port) {
-+		return;
-+	}
-+
-+	ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
-+		   AR40XX_FWD_CTRL0_MIRROR_PORT,
-+		   (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
-+
-+	if (priv->mirror_rx)
-+		ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0,
-+			   AR40XX_PORT_LOOKUP_ING_MIRROR_EN);
-+
-+	if (priv->mirror_tx)
-+		ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port),
-+			   0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN);
-+}
-+
-+static int
-+ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+	u8 ports = priv->vlan_table[val->port_vlan];
-+	int i;
-+
-+	val->len = 0;
-+	for (i = 0; i < dev->ports; i++) {
-+		struct switch_port *p;
-+
-+		if (!(ports & BIT(i)))
-+			continue;
-+
-+		p = &val->value.ports[val->len++];
-+		p->id = i;
-+		if ((priv->vlan_tagged & BIT(i)) ||
-+		    (priv->pvid[i] != val->port_vlan))
-+			p->flags = BIT(SWITCH_PORT_FLAG_TAGGED);
-+		else
-+			p->flags = 0;
-+	}
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+	u8 *vt = &priv->vlan_table[val->port_vlan];
-+	int i;
-+
-+	*vt = 0;
-+	for (i = 0; i < val->len; i++) {
-+		struct switch_port *p = &val->value.ports[i];
-+
-+		if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) {
-+			if (val->port_vlan == priv->pvid[p->id])
-+				priv->vlan_tagged |= BIT(p->id);
-+		} else {
-+			priv->vlan_tagged &= ~BIT(p->id);
-+			priv->pvid[p->id] = val->port_vlan;
-+		}
-+
-+		*vt |= BIT(p->id);
-+	}
-+	return 0;
-+}
-+
-+static int
-+ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val,
-+		unsigned timeout)
-+{
-+	int i;
-+
-+	for (i = 0; i < timeout; i++) {
-+		u32 t;
-+
-+		t = ar40xx_read(priv, reg);
-+		if ((t & mask) == val)
-+			return 0;
-+
-+		usleep_range(1000, 2000);
-+	}
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static int
-+ar40xx_mib_op(struct ar40xx_priv *priv, u32 op)
-+{
-+	int ret;
-+
-+	lockdep_assert_held(&priv->mib_lock);
-+
-+	/* Capture the hardware statistics for all ports */
-+	ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC,
-+		   AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S));
-+
-+	/* Wait for the capturing to complete. */
-+	ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC,
-+			      AR40XX_MIB_BUSY, 0, 10);
-+
-+	return ret;
-+}
-+
-+static void
-+ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush)
-+{
-+	unsigned int base;
-+	u64 *mib_stats;
-+	int i;
-+	u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-+
-+	WARN_ON(port >= priv->dev.ports);
-+
-+	lockdep_assert_held(&priv->mib_lock);
-+
-+	base = AR40XX_REG_PORT_STATS_START +
-+	       AR40XX_REG_PORT_STATS_LEN * port;
-+
-+	mib_stats = &priv->mib_stats[port * num_mibs];
-+	if (flush) {
-+		u32 len;
-+
-+		len = num_mibs * sizeof(*mib_stats);
-+		memset(mib_stats, 0, len);
-+		return;
-+	}
-+	for (i = 0; i < num_mibs; i++) {
-+		const struct ar40xx_mib_desc *mib;
-+		u64 t;
-+
-+		mib = &ar40xx_mibs[i];
-+		t = ar40xx_read(priv, base + mib->offset);
-+		if (mib->size == 2) {
-+			u64 hi;
-+
-+			hi = ar40xx_read(priv, base + mib->offset + 4);
-+			t |= hi << 32;
-+		}
-+
-+		mib_stats[i] += t;
-+	}
-+}
-+
-+static int
-+ar40xx_mib_capture(struct ar40xx_priv *priv)
-+{
-+	return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE);
-+}
-+
-+static int
-+ar40xx_mib_flush(struct ar40xx_priv *priv)
-+{
-+	return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH);
-+}
-+
-+static int
-+ar40xx_sw_set_reset_mibs(struct switch_dev *dev,
-+			 const struct switch_attr *attr,
-+			 struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+	unsigned int len;
-+	int ret;
-+	u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-+
-+	mutex_lock(&priv->mib_lock);
-+
-+	len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats);
-+	memset(priv->mib_stats, 0, len);
-+	ret = ar40xx_mib_flush(priv);
-+
-+	mutex_unlock(&priv->mib_lock);
-+	return ret;
-+}
-+
-+static int
-+ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
-+		   struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	priv->vlan = !!val->value.i;
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
-+		   struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	val->value.i = priv->vlan;
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev,
-+			       const struct switch_attr *attr,
-+			       struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	mutex_lock(&priv->reg_mutex);
-+	priv->mirror_rx = !!val->value.i;
-+	ar40xx_set_mirror_regs(priv);
-+	mutex_unlock(&priv->reg_mutex);
-+
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev,
-+			       const struct switch_attr *attr,
-+			       struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	mutex_lock(&priv->reg_mutex);
-+	val->value.i = priv->mirror_rx;
-+	mutex_unlock(&priv->reg_mutex);
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev,
-+			       const struct switch_attr *attr,
-+			       struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	mutex_lock(&priv->reg_mutex);
-+	priv->mirror_tx = !!val->value.i;
-+	ar40xx_set_mirror_regs(priv);
-+	mutex_unlock(&priv->reg_mutex);
-+
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev,
-+			       const struct switch_attr *attr,
-+			       struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	mutex_lock(&priv->reg_mutex);
-+	val->value.i = priv->mirror_tx;
-+	mutex_unlock(&priv->reg_mutex);
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev,
-+				  const struct switch_attr *attr,
-+				  struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	mutex_lock(&priv->reg_mutex);
-+	priv->monitor_port = val->value.i;
-+	ar40xx_set_mirror_regs(priv);
-+	mutex_unlock(&priv->reg_mutex);
-+
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev,
-+				  const struct switch_attr *attr,
-+				  struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	mutex_lock(&priv->reg_mutex);
-+	val->value.i = priv->monitor_port;
-+	mutex_unlock(&priv->reg_mutex);
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_mirror_source_port(struct switch_dev *dev,
-+				 const struct switch_attr *attr,
-+				 struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	mutex_lock(&priv->reg_mutex);
-+	priv->source_port = val->value.i;
-+	ar40xx_set_mirror_regs(priv);
-+	mutex_unlock(&priv->reg_mutex);
-+
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_mirror_source_port(struct switch_dev *dev,
-+				 const struct switch_attr *attr,
-+				 struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	mutex_lock(&priv->reg_mutex);
-+	val->value.i = priv->source_port;
-+	mutex_unlock(&priv->reg_mutex);
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_linkdown(struct switch_dev *dev,
-+		       const struct switch_attr *attr,
-+		       struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	if (val->value.i == 1)
-+		ar40xx_port_phy_linkdown(priv);
-+	else
-+		ar40xx_phy_init(priv);
-+
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_port_reset_mib(struct switch_dev *dev,
-+			     const struct switch_attr *attr,
-+			     struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+	int port;
-+	int ret;
-+
-+	port = val->port_vlan;
-+	if (port >= dev->ports)
-+		return -EINVAL;
-+
-+	mutex_lock(&priv->mib_lock);
-+	ret = ar40xx_mib_capture(priv);
-+	if (ret)
-+		goto unlock;
-+
-+	ar40xx_mib_fetch_port_stat(priv, port, true);
-+
-+unlock:
-+	mutex_unlock(&priv->mib_lock);
-+	return ret;
-+}
-+
-+static int
-+ar40xx_sw_get_port_mib(struct switch_dev *dev,
-+		       const struct switch_attr *attr,
-+		       struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+	u64 *mib_stats;
-+	int port;
-+	int ret;
-+	char *buf = priv->buf;
-+	int i, len = 0;
-+	u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-+
-+	port = val->port_vlan;
-+	if (port >= dev->ports)
-+		return -EINVAL;
-+
-+	mutex_lock(&priv->mib_lock);
-+	ret = ar40xx_mib_capture(priv);
-+	if (ret)
-+		goto unlock;
-+
-+	ar40xx_mib_fetch_port_stat(priv, port, false);
-+
-+	len += snprintf(buf + len, sizeof(priv->buf) - len,
-+			"Port %d MIB counters\n",
-+			port);
-+
-+	mib_stats = &priv->mib_stats[port * num_mibs];
-+	for (i = 0; i < num_mibs; i++)
-+		len += snprintf(buf + len, sizeof(priv->buf) - len,
-+				"%-12s: %llu\n",
-+				ar40xx_mibs[i].name,
-+				mib_stats[i]);
-+
-+	val->value.s = buf;
-+	val->len = len;
-+
-+unlock:
-+	mutex_unlock(&priv->mib_lock);
-+	return ret;
-+}
-+
-+static int
-+ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+		  struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	priv->vlan_id[val->port_vlan] = val->value.i;
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+		  struct switch_val *val)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	val->value.i = priv->vlan_id[val->port_vlan];
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+	*vlan = priv->pvid[port];
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	/* make sure no invalid PVIDs get set */
-+	if (vlan >= dev->vlans)
-+		return -EINVAL;
-+
-+	priv->pvid[port] = vlan;
-+	return 0;
-+}
-+
-+static void
-+ar40xx_read_port_link(struct ar40xx_priv *priv, int port,
-+		      struct switch_port_link *link)
-+{
-+	u32 status;
-+	u32 speed;
-+
-+	memset(link, 0, sizeof(*link));
-+
-+	status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port));
-+
-+	link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN);
-+	if (link->aneg || (port != AR40XX_PORT_CPU))
-+		link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP);
-+	else
-+		link->link = true;
-+
-+	if (!link->link)
-+		return;
-+
-+	link->duplex = !!(status & AR40XX_PORT_DUPLEX);
-+	link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW);
-+	link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW);
-+
-+	speed = (status & AR40XX_PORT_SPEED) >>
-+		 AR40XX_PORT_STATUS_SPEED_S;
-+
-+	switch (speed) {
-+	case AR40XX_PORT_SPEED_10M:
-+		link->speed = SWITCH_PORT_SPEED_10;
-+		break;
-+	case AR40XX_PORT_SPEED_100M:
-+		link->speed = SWITCH_PORT_SPEED_100;
-+		break;
-+	case AR40XX_PORT_SPEED_1000M:
-+		link->speed = SWITCH_PORT_SPEED_1000;
-+		break;
-+	default:
-+		link->speed = SWITCH_PORT_SPEED_UNKNOWN;
-+		break;
-+	}
-+}
-+
-+static int
-+ar40xx_sw_get_port_link(struct switch_dev *dev, int port,
-+			struct switch_port_link *link)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+	ar40xx_read_port_link(priv, port, link);
-+	return 0;
-+}
-+
-+static const struct switch_attr ar40xx_sw_attr_globals[] = {
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "enable_vlan",
-+		.description = "Enable VLAN mode",
-+		.set = ar40xx_sw_set_vlan,
-+		.get = ar40xx_sw_get_vlan,
-+		.max = 1
-+	},
-+	{
-+		.type = SWITCH_TYPE_NOVAL,
-+		.name = "reset_mibs",
-+		.description = "Reset all MIB counters",
-+		.set = ar40xx_sw_set_reset_mibs,
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "enable_mirror_rx",
-+		.description = "Enable mirroring of RX packets",
-+		.set = ar40xx_sw_set_mirror_rx_enable,
-+		.get = ar40xx_sw_get_mirror_rx_enable,
-+		.max = 1
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "enable_mirror_tx",
-+		.description = "Enable mirroring of TX packets",
-+		.set = ar40xx_sw_set_mirror_tx_enable,
-+		.get = ar40xx_sw_get_mirror_tx_enable,
-+		.max = 1
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "mirror_monitor_port",
-+		.description = "Mirror monitor port",
-+		.set = ar40xx_sw_set_mirror_monitor_port,
-+		.get = ar40xx_sw_get_mirror_monitor_port,
-+		.max = AR40XX_NUM_PORTS - 1
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "mirror_source_port",
-+		.description = "Mirror source port",
-+		.set = ar40xx_sw_set_mirror_source_port,
-+		.get = ar40xx_sw_get_mirror_source_port,
-+		.max = AR40XX_NUM_PORTS - 1
-+	},
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "linkdown",
-+		.description = "Link down all the PHYs",
-+		.set = ar40xx_sw_set_linkdown,
-+		.max = 1
-+	},
-+};
-+
-+static const struct switch_attr ar40xx_sw_attr_port[] = {
-+	{
-+		.type = SWITCH_TYPE_NOVAL,
-+		.name = "reset_mib",
-+		.description = "Reset single port MIB counters",
-+		.set = ar40xx_sw_set_port_reset_mib,
-+	},
-+	{
-+		.type = SWITCH_TYPE_STRING,
-+		.name = "mib",
-+		.description = "Get port's MIB counters",
-+		.set = NULL,
-+		.get = ar40xx_sw_get_port_mib,
-+	},
-+};
-+
-+const struct switch_attr ar40xx_sw_attr_vlan[] = {
-+	{
-+		.type = SWITCH_TYPE_INT,
-+		.name = "vid",
-+		.description = "VLAN ID (0-4094)",
-+		.set = ar40xx_sw_set_vid,
-+		.get = ar40xx_sw_get_vid,
-+		.max = 4094,
-+	},
-+};
-+
-+/* End of swconfig support */
-+
-+static int
-+ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
-+{
-+	int timeout = 20;
-+	u32 t;
-+
-+	while (1) {
-+		t = ar40xx_read(priv, reg);
-+		if ((t & mask) == val)
-+			return 0;
-+
-+		if (timeout-- <= 0)
-+			break;
-+
-+		usleep_range(10, 20);
-+	}
-+
-+	pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n",
-+	       (unsigned int)reg, t, mask, val);
-+	return -ETIMEDOUT;
-+}
-+
-+static int
-+ar40xx_atu_flush(struct ar40xx_priv *priv)
-+{
-+	int ret;
-+
-+	ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC,
-+			      AR40XX_ATU_FUNC_BUSY, 0);
-+	if (!ret)
-+		ar40xx_write(priv, AR40XX_REG_ATU_FUNC,
-+			     AR40XX_ATU_FUNC_OP_FLUSH |
-+			     AR40XX_ATU_FUNC_BUSY);
-+
-+	return ret;
-+}
-+
-+static void
-+ar40xx_ess_reset(struct ar40xx_priv *priv)
-+{
-+	reset_control_assert(priv->ess_rst);
-+	mdelay(10);
-+	reset_control_deassert(priv->ess_rst);
-+	/* Waiting for all inner tables init done.
-+	  * It cost 5~10ms.
-+	  */
-+	mdelay(10);
-+
-+	pr_info("ESS reset ok!\n");
-+}
-+
-+/* Start of psgmii self test */
-+
-+static void
-+ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv)
-+{
-+	u32 n;
-+	struct mii_bus *bus = priv->mii_bus;
-+	/* reset phy psgmii */
-+	/* fix phy psgmii RX 20bit */
-+	mdiobus_write(bus, 5, 0x0, 0x005b);
-+	/* reset phy psgmii */
-+	mdiobus_write(bus, 5, 0x0, 0x001b);
-+	/* release reset phy psgmii */
-+	mdiobus_write(bus, 5, 0x0, 0x005b);
-+
-+	for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
-+		u16 status;
-+
-+		status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28);
-+		if (status & BIT(0))
-+			break;
-+		/* Polling interval to check PSGMII PLL in malibu is ready
-+		  * the worst time is 8.67ms
-+		  * for 25MHz reference clock
-+		  * [512+(128+2048)*49]*80ns+100us
-+		  */
-+		mdelay(2);
-+	}
-+
-+	/*check malibu psgmii calibration done end..*/
-+
-+	/*freeze phy psgmii RX CDR*/
-+	mdiobus_write(bus, 5, 0x1a, 0x2230);
-+
-+	ar40xx_ess_reset(priv);
-+
-+	/*check psgmii calibration done start*/
-+	for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
-+		u32 status;
-+
-+		status = ar40xx_psgmii_read(priv, 0xa0);
-+		if (status & BIT(0))
-+			break;
-+		/* Polling interval to check PSGMII PLL in ESS is ready */
-+		mdelay(2);
-+	}
-+
-+	/* check dakota psgmii calibration done end..*/
-+
-+	/* relesae phy psgmii RX CDR */
-+	mdiobus_write(bus, 5, 0x1a, 0x3230);
-+	/* release phy psgmii RX 20bit */
-+	mdiobus_write(bus, 5, 0x0, 0x005f);
-+}
-+
-+static void
-+ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy)
-+{
-+	int j;
-+	u32 tx_ok, tx_error;
-+	u32 rx_ok, rx_error;
-+	u32 tx_ok_high16;
-+	u32 rx_ok_high16;
-+	u32 tx_all_ok, rx_all_ok;
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	mdiobus_write(bus, phy, 0x0, 0x9000);
-+	mdiobus_write(bus, phy, 0x0, 0x4140);
-+
-+	for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
-+		u16 status;
-+
-+		status = mdiobus_read(bus, phy, 0x11);
-+		if (status & AR40XX_PHY_SPEC_STATUS_LINK)
-+			break;
-+		/* the polling interval to check if the PHY link up or not
-+		  * maxwait_timer: 750 ms +/-10 ms
-+		  * minwait_timer : 1 us +/- 0.1us
-+		  * time resides in minwait_timer ~ maxwait_timer
-+		  * see IEEE 802.3 section 40.4.5.2
-+		  */
-+		mdelay(8);
-+	}
-+
-+	/* enable check */
-+	ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000);
-+	ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003);
-+
-+	/* start traffic */
-+	ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000);
-+	/* wait for all traffic end
-+	  * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
-+	  */
-+	mdelay(50);
-+
-+	/* check counter */
-+	tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
-+	tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
-+	tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
-+	rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
-+	rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
-+	rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
-+	tx_all_ok = tx_ok + (tx_ok_high16 << 16);
-+	rx_all_ok = rx_ok + (rx_ok_high16 << 16);
-+	if (tx_all_ok == 0x1000 && tx_error == 0) {
-+		/* success */
-+		priv->phy_t_status &= (~BIT(phy));
-+	} else {
-+		pr_info("PHY %d single test PSGMII issue happen!\n", phy);
-+		priv->phy_t_status |= BIT(phy);
-+	}
-+
-+	mdiobus_write(bus, phy, 0x0, 0x1840);
-+}
-+
-+static void
-+ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv)
-+{
-+	int phy, j;
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	mdiobus_write(bus, 0x1f, 0x0, 0x9000);
-+	mdiobus_write(bus, 0x1f, 0x0, 0x4140);
-+
-+	for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
-+		for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+			u16 status;
-+
-+			status = mdiobus_read(bus, phy, 0x11);
-+			if (!(status & BIT(10)))
-+				break;
-+		}
-+
-+		if (phy >= (AR40XX_NUM_PORTS - 1))
-+			break;
-+		/* The polling interva to check if the PHY link up or not */
-+		mdelay(8);
-+	}
-+	/* enable check */
-+	ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000);
-+	ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003);
-+
-+	/* start traffic */
-+	ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000);
-+	/* wait for all traffic end
-+	  * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
-+	  */
-+	mdelay(50);
-+
-+	for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+		u32 tx_ok, tx_error;
-+		u32 rx_ok, rx_error;
-+		u32 tx_ok_high16;
-+		u32 rx_ok_high16;
-+		u32 tx_all_ok, rx_all_ok;
-+
-+		/* check counter */
-+		tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
-+		tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
-+		tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
-+		rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
-+		rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
-+		rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
-+		tx_all_ok = tx_ok + (tx_ok_high16<<16);
-+		rx_all_ok = rx_ok + (rx_ok_high16<<16);
-+		if (tx_all_ok == 0x1000 && tx_error == 0) {
-+			/* success */
-+			priv->phy_t_status &= ~BIT(phy + 8);
-+		} else {
-+			pr_info("PHY%d test see issue!\n", phy);
-+			priv->phy_t_status |= BIT(phy + 8);
-+		}
-+	}
-+
-+	pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status);
-+}
-+
-+void
-+ar40xx_psgmii_self_test(struct ar40xx_priv *priv)
-+{
-+	u32 i, phy;
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	ar40xx_malibu_psgmii_ess_reset(priv);
-+
-+	/* switch to access MII reg for copper */
-+	mdiobus_write(bus, 4, 0x1f, 0x8500);
-+	for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+		/*enable phy mdio broadcast write*/
-+		ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f);
-+	}
-+	/* force no link by power down */
-+	mdiobus_write(bus, 0x1f, 0x0, 0x1840);
-+	/*packet number*/
-+	ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000);
-+	ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0);
-+
-+	/*fix mdi status */
-+	mdiobus_write(bus, 0x1f, 0x10, 0x6800);
-+	for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) {
-+		priv->phy_t_status = 0;
-+
-+		for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+			ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
-+				AR40XX_PORT_LOOKUP_LOOPBACK,
-+				AR40XX_PORT_LOOKUP_LOOPBACK);
-+		}
-+
-+		for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++)
-+			ar40xx_psgmii_single_phy_testing(priv, phy);
-+
-+		ar40xx_psgmii_all_phy_testing(priv);
-+
-+		if (priv->phy_t_status)
-+			ar40xx_malibu_psgmii_ess_reset(priv);
-+		else
-+			break;
-+	}
-+
-+	if (i >= AR40XX_PSGMII_CALB_NUM)
-+		pr_info("PSGMII cannot recover\n");
-+	else
-+		pr_debug("PSGMII recovered after %d times reset\n", i);
-+
-+	/* configuration recover */
-+	/* packet number */
-+	ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0);
-+	/* disable check */
-+	ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0);
-+	/* disable traffic */
-+	ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0);
-+}
-+
-+void
-+ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv)
-+{
-+	int phy;
-+	struct mii_bus *bus = priv->mii_bus;
-+
-+	/* disable phy internal loopback */
-+	mdiobus_write(bus, 0x1f, 0x10, 0x6860);
-+	mdiobus_write(bus, 0x1f, 0x0, 0x9040);
-+
-+	for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+		/* disable mac loop back */
-+		ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
-+				AR40XX_PORT_LOOKUP_LOOPBACK, 0);
-+		/* disable phy mdio broadcast write */
-+		ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f);
-+	}
-+
-+	/* clear fdb entry */
-+	ar40xx_atu_flush(priv);
-+}
-+
-+/* End of psgmii self test */
-+
-+static void
-+ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode)
-+{
-+	if (mode == PORT_WRAPPER_PSGMII) {
-+		ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200);
-+		ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380);
-+	}
-+}
-+
-+static
-+int ar40xx_cpuport_setup(struct ar40xx_priv *priv)
-+{
-+	u32 t;
-+
-+	t = AR40XX_PORT_STATUS_TXFLOW |
-+	     AR40XX_PORT_STATUS_RXFLOW |
-+	     AR40XX_PORT_TXHALF_FLOW |
-+	     AR40XX_PORT_DUPLEX |
-+	     AR40XX_PORT_SPEED_1000M;
-+	ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
-+	usleep_range(10, 20);
-+
-+	t |= AR40XX_PORT_TX_EN |
-+	       AR40XX_PORT_RX_EN;
-+	ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
-+
-+	return 0;
-+}
-+
-+static void
-+ar40xx_init_port(struct ar40xx_priv *priv, int port)
-+{
-+	u32 t;
-+
-+	ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port),
-+			AR40XX_PORT_AUTO_LINK_EN, 0);
-+
-+	ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
-+
-+	ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0);
-+
-+	t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S;
-+	ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-+
-+	t = AR40XX_PORT_LOOKUP_LEARN;
-+	t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
-+	ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
-+}
-+
-+void
-+ar40xx_init_globals(struct ar40xx_priv *priv)
-+{
-+	u32 t;
-+
-+	/* enable CPU port and disable mirror port */
-+	t = AR40XX_FWD_CTRL0_CPU_PORT_EN |
-+	    AR40XX_FWD_CTRL0_MIRROR_PORT;
-+	ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t);
-+
-+	/* forward multicast and broadcast frames to CPU */
-+	t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) |
-+	    (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) |
-+	    (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S);
-+	ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t);
-+
-+	/* enable jumbo frames */
-+	ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE,
-+		   AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
-+
-+	/* Enable MIB counters */
-+	ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0,
-+		   AR40XX_MODULE_EN_MIB);
-+
-+	/* Disable AZ */
-+	ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0);
-+
-+	/* set flowctrl thershold for cpu port */
-+	t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) |
-+	      AR40XX_PORT0_FC_THRESH_OFF_DFLT;
-+	ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t);
-+}
-+
-+static void
-+ar40xx_malibu_init(struct ar40xx_priv *priv)
-+{
-+	int i;
-+	struct mii_bus *bus;
-+	u16 val;
-+
-+	bus = priv->mii_bus;
-+
-+	/* war to enable AZ transmitting ability */
-+	ar40xx_phy_mmd_write(priv, AR40XX_PSGMII_ID, 1,
-+			     AR40XX_MALIBU_PSGMII_MODE_CTRL,
-+			     AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL);
-+	for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
-+		/* change malibu control_dac */
-+		val = ar40xx_phy_mmd_read(priv, i, 7,
-+					  AR40XX_MALIBU_PHY_MMD7_DAC_CTRL);
-+		val &= ~AR40XX_MALIBU_DAC_CTRL_MASK;
-+		val |= AR40XX_MALIBU_DAC_CTRL_VALUE;
-+		ar40xx_phy_mmd_write(priv, i, 7,
-+				     AR40XX_MALIBU_PHY_MMD7_DAC_CTRL, val);
-+		if (i == AR40XX_MALIBU_PHY_LAST_ADDR) {
-+			/* to avoid goes into hibernation */
-+			val = ar40xx_phy_mmd_read(priv, i, 3,
-+						  AR40XX_MALIBU_PHY_RLP_CTRL);
-+			val &= (~(1<<1));
-+			ar40xx_phy_mmd_write(priv, i, 3,
-+					     AR40XX_MALIBU_PHY_RLP_CTRL, val);
-+		}
-+	}
-+
-+	/* adjust psgmii serdes tx amp */
-+	mdiobus_write(bus, AR40XX_PSGMII_ID, AR40XX_PSGMII_TX_DRIVER_1_CTRL,
-+		      AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP);
-+}
-+
-+static int
-+ar40xx_hw_init(struct ar40xx_priv *priv)
-+{
-+	u32 i;
-+
-+	ar40xx_ess_reset(priv);
-+
-+	if (priv->mii_bus)
-+		ar40xx_malibu_init(priv);
-+	else
-+		return -1;
-+
-+	ar40xx_psgmii_self_test(priv);
-+	ar40xx_psgmii_self_test_clean(priv);
-+
-+	ar40xx_mac_mode_init(priv, priv->mac_mode);
-+
-+	for (i = 0; i < priv->dev.ports; i++)
-+		ar40xx_init_port(priv, i);
-+
-+	ar40xx_init_globals(priv);
-+
-+	return 0;
-+}
-+
-+/* Start of qm error WAR */
-+
-+static
-+int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id)
-+{
-+	u32 reg;
-+
-+	if (port_id < 0 || port_id > 6)
-+		return -1;
-+
-+	reg = AR40XX_REG_PORT_STATUS(port_id);
-+	return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED,
-+			(AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX));
-+}
-+
-+static
-+int ar40xx_get_qm_status(struct ar40xx_priv *priv,
-+			 u32 port_id, u32 *qm_buffer_err)
-+{
-+	u32 reg;
-+	u32 qm_val;
-+
-+	if (port_id < 1 || port_id > 5) {
-+		*qm_buffer_err = 0;
-+		return -1;
-+	}
-+
-+	if (port_id < 4) {
-+		reg = AR40XX_REG_QM_PORT0_3_QNUM;
-+		ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
-+		qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
-+		/* every 8 bits for each port */
-+		*qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF;
-+	} else {
-+		reg = AR40XX_REG_QM_PORT4_6_QNUM;
-+		ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
-+		qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
-+		/* every 8 bits for each port */
-+		*qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF;
-+	}
-+
-+	return 0;
-+}
-+
-+static void
-+ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv)
-+{
-+	static int task_count;
-+	u32 i;
-+	u32 reg, value;
-+	u32 link, speed, duplex;
-+	u32 qm_buffer_err;
-+	u16 port_phy_status[AR40XX_NUM_PORTS];
-+	static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
-+	static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
-+	struct mii_bus *bus = NULL;
-+
-+	if (!priv || !priv->mii_bus)
-+		return;
-+
-+	bus = priv->mii_bus;
-+
-+	++task_count;
-+
-+	for (i = 1; i < AR40XX_NUM_PORTS; ++i) {
-+		port_phy_status[i] =
-+			mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS);
-+		speed = link = duplex = port_phy_status[i];
-+		speed &= AR40XX_PHY_SPEC_STATUS_SPEED;
-+		speed >>= 14;
-+		link &= AR40XX_PHY_SPEC_STATUS_LINK;
-+		link >>= 10;
-+		duplex &= AR40XX_PHY_SPEC_STATUS_DUPLEX;
-+		duplex >>= 13;
-+
-+		if (link != priv->ar40xx_port_old_link[i]) {
-+			++link_cnt[i];
-+			/* Up --> Down */
-+			if ((priv->ar40xx_port_old_link[i] ==
-+					AR40XX_PORT_LINK_UP) &&
-+			    (link == AR40XX_PORT_LINK_DOWN)) {
-+				/* LINK_EN disable(MAC force mode)*/
-+				reg = AR40XX_REG_PORT_STATUS(i);
-+				ar40xx_rmw(priv, reg,
-+						AR40XX_PORT_AUTO_LINK_EN, 0);
-+
-+				/* Check queue buffer */
-+				qm_err_cnt[i] = 0;
-+				ar40xx_get_qm_status(priv, i, &qm_buffer_err);
-+				if (qm_buffer_err) {
-+					priv->ar40xx_port_qm_buf[i] =
-+						AR40XX_QM_NOT_EMPTY;
-+				} else {
-+					u16 phy_val = 0;
-+
-+					priv->ar40xx_port_qm_buf[i] =
-+						AR40XX_QM_EMPTY;
-+					ar40xx_force_1g_full(priv, i);
-+					/* Ref:QCA8337 Datasheet,Clearing
-+					 * MENU_CTRL_EN prevents phy to
-+					 * stuck in 100BT mode when
-+					 * bringing up the link
-+					 */
-+					ar40xx_phy_dbg_read(priv, i-1,
-+							    AR40XX_PHY_DEBUG_0,
-+							    &phy_val);
-+					phy_val &= (~AR40XX_PHY_MANU_CTRL_EN);
-+					ar40xx_phy_dbg_write(priv, i-1,
-+							     AR40XX_PHY_DEBUG_0,
-+							     phy_val);
-+				}
-+				priv->ar40xx_port_old_link[i] = link;
-+			} else if ((priv->ar40xx_port_old_link[i] ==
-+						AR40XX_PORT_LINK_DOWN) &&
-+					(link == AR40XX_PORT_LINK_UP)) {
-+				/* Down --> Up */
-+				if (priv->port_link_up[i] < 1) {
-+					++priv->port_link_up[i];
-+				} else {
-+					/* Change port status */
-+					reg = AR40XX_REG_PORT_STATUS(i);
-+					value = ar40xx_read(priv, reg);
-+					priv->port_link_up[i] = 0;
-+
-+					value &= ~(AR40XX_PORT_DUPLEX |
-+						   AR40XX_PORT_SPEED);
-+					value |= speed | (duplex ? BIT(6) : 0);
-+					ar40xx_write(priv, reg, value);
-+					/* clock switch need such time
-+					 * to avoid glitch
-+					 */
-+					usleep_range(100, 200);
-+
-+					value |= AR40XX_PORT_AUTO_LINK_EN;
-+					ar40xx_write(priv, reg, value);
-+					/* HW need such time to make sure link
-+					 * stable before enable MAC
-+					 */
-+					usleep_range(100, 200);
-+
-+					if (speed == AR40XX_PORT_SPEED_100M) {
-+						u16 phy_val = 0;
-+						/* Enable @100M, if down to 10M
-+						 * clock will change smoothly
-+						 */
-+						ar40xx_phy_dbg_read(priv, i-1,
-+								    0,
-+								    &phy_val);
-+						phy_val |=
-+							AR40XX_PHY_MANU_CTRL_EN;
-+						ar40xx_phy_dbg_write(priv, i-1,
-+								     0,
-+								     phy_val);
-+					}
-+					priv->ar40xx_port_old_link[i] = link;
-+				}
-+			}
-+		}
-+
-+		if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) {
-+			/* Check QM */
-+			ar40xx_get_qm_status(priv, i, &qm_buffer_err);
-+			if (qm_buffer_err) {
-+				++qm_err_cnt[i];
-+			} else {
-+				priv->ar40xx_port_qm_buf[i] =
-+						AR40XX_QM_EMPTY;
-+				qm_err_cnt[i] = 0;
-+				ar40xx_force_1g_full(priv, i);
-+			}
-+		}
-+	}
-+}
-+
-+static void
-+ar40xx_qm_err_check_work_task(struct work_struct *work)
-+{
-+	struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv,
-+					qm_dwork.work);
-+
-+	mutex_lock(&priv->qm_lock);
-+
-+	ar40xx_sw_mac_polling_task(priv);
-+
-+	mutex_unlock(&priv->qm_lock);
-+
-+	schedule_delayed_work(&priv->qm_dwork,
-+			      msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
-+}
-+
-+static int
-+ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv)
-+{
-+	mutex_init(&priv->qm_lock);
-+
-+	INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task);
-+
-+	schedule_delayed_work(&priv->qm_dwork,
-+			      msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
-+
-+	return 0;
-+}
-+
-+/* End of qm error WAR */
-+
-+static int
-+ar40xx_vlan_init(struct ar40xx_priv *priv)
-+{
-+	int port;
-+	unsigned long bmp;
-+
-+	/* By default Enable VLAN */
-+	priv->vlan = 1;
-+	priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp;
-+	priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp;
-+	priv->vlan_tagged = priv->cpu_bmp;
-+	bmp = priv->lan_bmp;
-+	for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
-+			priv->pvid[port] = AR40XX_LAN_VLAN;
-+
-+	bmp = priv->wan_bmp;
-+	for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
-+			priv->pvid[port] = AR40XX_WAN_VLAN;
-+
-+	return 0;
-+}
-+
-+static void
-+ar40xx_mib_work_func(struct work_struct *work)
-+{
-+	struct ar40xx_priv *priv;
-+	int err;
-+
-+	priv = container_of(work, struct ar40xx_priv, mib_work.work);
-+
-+	mutex_lock(&priv->mib_lock);
-+
-+	err = ar40xx_mib_capture(priv);
-+	if (err)
-+		goto next_port;
-+
-+	ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false);
-+
-+next_port:
-+	priv->mib_next_port++;
-+	if (priv->mib_next_port >= priv->dev.ports)
-+		priv->mib_next_port = 0;
-+
-+	mutex_unlock(&priv->mib_lock);
-+
-+	schedule_delayed_work(&priv->mib_work,
-+			      msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
-+}
-+
-+static void
-+ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members)
-+{
-+	u32 t;
-+	u32 egress, ingress;
-+	u32 pvid = priv->vlan_id[priv->pvid[port]];
-+
-+	if (priv->vlan) {
-+		egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
-+		ingress = AR40XX_IN_SECURE;
-+	} else {
-+		egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH;
-+		ingress = AR40XX_IN_PORT_ONLY;
-+	}
-+
-+	t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S;
-+	t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S;
-+	ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t);
-+
-+	t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
-+	t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
-+	ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-+
-+	t = members;
-+	t |= AR40XX_PORT_LOOKUP_LEARN;
-+	t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S;
-+	t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
-+	ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
-+}
-+
-+static void
-+ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val)
-+{
-+	if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1,
-+			    AR40XX_VTU_FUNC1_BUSY, 0))
-+		return;
-+
-+	if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD)
-+		ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val);
-+
-+	op |= AR40XX_VTU_FUNC1_BUSY;
-+	ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op);
-+}
-+
-+static void
-+ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask)
-+{
-+	u32 op;
-+	u32 val;
-+	int i;
-+
-+	op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S);
-+	val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL;
-+	for (i = 0; i < AR40XX_NUM_PORTS; i++) {
-+		u32 mode;
-+
-+		if ((port_mask & BIT(i)) == 0)
-+			mode = AR40XX_VTU_FUNC0_EG_MODE_NOT;
-+		else if (priv->vlan == 0)
-+			mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP;
-+		else if ((priv->vlan_tagged & BIT(i)) ||
-+			 (priv->vlan_id[priv->pvid[i]] != vid))
-+			mode = AR40XX_VTU_FUNC0_EG_MODE_TAG;
-+		else
-+			mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG;
-+
-+		val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i);
-+	}
-+	ar40xx_vtu_op(priv, op, val);
-+}
-+
-+static void
-+ar40xx_vtu_flush(struct ar40xx_priv *priv)
-+{
-+	ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0);
-+}
-+
-+static int
-+ar40xx_sw_hw_apply(struct switch_dev *dev)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+	u8 portmask[AR40XX_NUM_PORTS];
-+	int i, j;
-+
-+	mutex_lock(&priv->reg_mutex);
-+	/* flush all vlan entries */
-+	ar40xx_vtu_flush(priv);
-+
-+	memset(portmask, 0, sizeof(portmask));
-+	if (priv->vlan) {
-+		for (j = 0; j < AR40XX_MAX_VLANS; j++) {
-+			u8 vp = priv->vlan_table[j];
-+
-+			if (!vp)
-+				continue;
-+
-+			for (i = 0; i < dev->ports; i++) {
-+				u8 mask = BIT(i);
-+
-+				if (vp & mask)
-+					portmask[i] |= vp & ~mask;
-+			}
-+
-+			ar40xx_vtu_load_vlan(priv, priv->vlan_id[j],
-+					     priv->vlan_table[j]);
-+		}
-+	} else {
-+		/* 8021q vlan disabled */
-+		for (i = 0; i < dev->ports; i++) {
-+			if (i == AR40XX_PORT_CPU)
-+				continue;
-+
-+			portmask[i] = BIT(AR40XX_PORT_CPU);
-+			portmask[AR40XX_PORT_CPU] |= BIT(i);
-+		}
-+	}
-+
-+	/* update the port destination mask registers and tag settings */
-+	for (i = 0; i < dev->ports; i++)
-+		ar40xx_setup_port(priv, i, portmask[i]);
-+
-+	ar40xx_set_mirror_regs(priv);
-+
-+	mutex_unlock(&priv->reg_mutex);
-+	return 0;
-+}
-+
-+static int
-+ar40xx_sw_reset_switch(struct switch_dev *dev)
-+{
-+	struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+	int i, rv;
-+
-+	mutex_lock(&priv->reg_mutex);
-+	memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) -
-+		offsetof(struct ar40xx_priv, vlan));
-+
-+	for (i = 0; i < AR40XX_MAX_VLANS; i++)
-+		priv->vlan_id[i] = i;
-+
-+	ar40xx_vlan_init(priv);
-+
-+	priv->mirror_rx = false;
-+	priv->mirror_tx = false;
-+	priv->source_port = 0;
-+	priv->monitor_port = 0;
-+
-+	mutex_unlock(&priv->reg_mutex);
-+
-+	rv = ar40xx_sw_hw_apply(dev);
-+	return rv;
-+}
-+
-+static int
-+ar40xx_start(struct ar40xx_priv *priv)
-+{
-+	int ret;
-+
-+	ret = ar40xx_hw_init(priv);
-+	if (ret)
-+		return ret;
-+
-+	ret = ar40xx_sw_reset_switch(&priv->dev);
-+	if (ret)
-+		return ret;
-+
-+	/* at last, setup cpu port */
-+	ret = ar40xx_cpuport_setup(priv);
-+	if (ret)
-+		return ret;
-+
-+	schedule_delayed_work(&priv->mib_work,
-+			      msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
-+
-+	ar40xx_qm_err_check_work_start(priv);
-+
-+	return 0;
-+}
-+
-+static const struct switch_dev_ops ar40xx_sw_ops = {
-+	.attr_global = {
-+		.attr = ar40xx_sw_attr_globals,
-+		.n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals),
-+	},
-+	.attr_port = {
-+		.attr = ar40xx_sw_attr_port,
-+		.n_attr = ARRAY_SIZE(ar40xx_sw_attr_port),
-+	},
-+	.attr_vlan = {
-+		.attr = ar40xx_sw_attr_vlan,
-+		.n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan),
-+	},
-+	.get_port_pvid = ar40xx_sw_get_pvid,
-+	.set_port_pvid = ar40xx_sw_set_pvid,
-+	.get_vlan_ports = ar40xx_sw_get_ports,
-+	.set_vlan_ports = ar40xx_sw_set_ports,
-+	.apply_config = ar40xx_sw_hw_apply,
-+	.reset_switch = ar40xx_sw_reset_switch,
-+	.get_port_link = ar40xx_sw_get_port_link,
-+};
-+
-+/* Start of phy driver support */
-+
-+static const u32 ar40xx_phy_ids[] = {
-+	0x004dd0b1,
-+	0x004dd0b2, /* AR40xx */
-+};
-+
-+static bool
-+ar40xx_phy_match(u32 phy_id)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(ar40xx_phy_ids); i++)
-+		if (phy_id == ar40xx_phy_ids[i])
-+			return true;
-+
-+	return false;
-+}
-+
-+static bool
-+is_ar40xx_phy(struct mii_bus *bus)
-+{
-+	unsigned i;
-+
-+	for (i = 0; i < 4; i++) {
-+		u32 phy_id;
-+
-+		phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16;
-+		phy_id |= mdiobus_read(bus, i, MII_PHYSID2);
-+		if (!ar40xx_phy_match(phy_id))
-+			return false;
-+	}
-+
-+	return true;
-+}
-+
-+static int
-+ar40xx_phy_probe(struct phy_device *phydev)
-+{
-+	if (!is_ar40xx_phy(phydev->mdio.bus))
-+		return -ENODEV;
-+
-+	ar40xx_priv->mii_bus = phydev->mdio.bus;
-+	phydev->priv = ar40xx_priv;
-+	if (phydev->mdio.addr == 0)
-+		ar40xx_priv->phy = phydev;
-+
-+	phydev->supported |= SUPPORTED_1000baseT_Full;
-+	phydev->advertising |= ADVERTISED_1000baseT_Full;
-+	return 0;
-+}
-+
-+static void
-+ar40xx_phy_remove(struct phy_device *phydev)
-+{
-+	ar40xx_priv->mii_bus = NULL;
-+	phydev->priv = NULL;
-+}
-+
-+static int
-+ar40xx_phy_config_init(struct phy_device *phydev)
-+{
-+	return 0;
-+}
-+
-+static int
-+ar40xx_phy_read_status(struct phy_device *phydev)
-+{
-+	if (phydev->mdio.addr != 0)
-+		return genphy_read_status(phydev);
-+
-+	return 0;
-+}
-+
-+static int
-+ar40xx_phy_config_aneg(struct phy_device *phydev)
-+{
-+	if (phydev->mdio.addr == 0)
-+		return 0;
-+
-+	return genphy_config_aneg(phydev);
-+}
-+
-+static struct phy_driver ar40xx_phy_driver = {
-+	.phy_id		= 0x004d0000,
-+	.name		= "QCA Malibu",
-+	.phy_id_mask	= 0xffff0000,
-+	.features	= PHY_BASIC_FEATURES,
-+	.probe		= ar40xx_phy_probe,
-+	.remove		= ar40xx_phy_remove,
-+	.config_init	= ar40xx_phy_config_init,
-+	.config_aneg	= ar40xx_phy_config_aneg,
-+	.read_status	= ar40xx_phy_read_status,
-+};
-+
-+static uint16_t ar40xx_gpio_get_phy(unsigned int offset)
-+{
-+	return offset / 4;
-+}
-+
-+static uint16_t ar40xx_gpio_get_reg(unsigned int offset)
-+{
-+	return 0x8074 + offset % 4;
-+}
-+
-+static void ar40xx_gpio_set(struct gpio_chip *gc, unsigned int offset,
-+			    int value)
-+{
-+	struct ar40xx_priv *priv = gpiochip_get_data(gc);
-+
-+	ar40xx_phy_mmd_write(priv, ar40xx_gpio_get_phy(offset), 0x7,
-+			     ar40xx_gpio_get_reg(offset),
-+			     value ? 0xA000 : 0x8000);
-+}
-+
-+static int ar40xx_gpio_get(struct gpio_chip *gc, unsigned offset)
-+{
-+	struct ar40xx_priv *priv = gpiochip_get_data(gc);
-+
-+	return ar40xx_phy_mmd_read(priv, ar40xx_gpio_get_phy(offset), 0x7,
-+				   ar40xx_gpio_get_reg(offset)) == 0xA000;
-+}
-+
-+static int ar40xx_gpio_get_dir(struct gpio_chip *gc, unsigned offset)
-+{
-+	return 0; /* only out direction */
-+}
-+
-+static int ar40xx_gpio_dir_out(struct gpio_chip *gc, unsigned offset,
-+			       int value)
-+{
-+	/*
-+	 * the direction out value is used to set the initial value.
-+	 * support of this function is required by leds-gpio.c
-+	 */
-+	ar40xx_gpio_set(gc, offset, value);
-+	return 0;
-+}
-+
-+static void ar40xx_register_gpio(struct device *pdev,
-+				 struct ar40xx_priv *priv,
-+				 struct device_node *switch_node)
-+{
-+	struct gpio_chip *gc;
-+	int err;
-+
-+	gc = devm_kzalloc(pdev, sizeof(*gc), GFP_KERNEL);
-+	if (!gc)
-+		return;
-+
-+	gc->label = "ar40xx_gpio",
-+	gc->base = -1,
-+	gc->ngpio = 5 /* mmd 0 - 4 */ * 4 /* 0x8074 - 0x8077 */,
-+	gc->parent = pdev;
-+	gc->owner = THIS_MODULE;
-+
-+	gc->get_direction = ar40xx_gpio_get_dir;
-+	gc->direction_output = ar40xx_gpio_dir_out;
-+	gc->get = ar40xx_gpio_get;
-+	gc->set = ar40xx_gpio_set;
-+	gc->can_sleep = true;
-+	gc->label = priv->dev.name;
-+	gc->of_node = switch_node;
-+
-+	err = devm_gpiochip_add_data(pdev, gc, priv);
-+	if (err != 0)
-+		dev_err(pdev, "Failed to register gpio %d.\n", err);
-+}
-+
-+/* End of phy driver support */
-+
-+/* Platform driver probe function */
-+
-+static int ar40xx_probe(struct platform_device *pdev)
-+{
-+	struct device_node *switch_node;
-+	struct device_node *psgmii_node;
-+	const __be32 *mac_mode;
-+	struct clk *ess_clk;
-+	struct switch_dev *swdev;
-+	struct ar40xx_priv *priv;
-+	u32 len;
-+	u32 num_mibs;
-+	struct resource psgmii_base = {0};
-+	struct resource switch_base = {0};
-+	int ret;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	platform_set_drvdata(pdev, priv);
-+	ar40xx_priv = priv;
-+
-+	switch_node = of_node_get(pdev->dev.of_node);
-+	if (of_address_to_resource(switch_node, 0, &switch_base) != 0)
-+		return -EIO;
-+
-+	priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base);
-+	if (IS_ERR(priv->hw_addr)) {
-+		dev_err(&pdev->dev, "Failed to ioremap switch_base!\n");
-+		return PTR_ERR(priv->hw_addr);
-+	}
-+
-+	/*psgmii dts get*/
-+	psgmii_node = of_find_node_by_name(NULL, "ess-psgmii");
-+	if (!psgmii_node) {
-+		dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n");
-+		return -EINVAL;
-+	}
-+
-+	if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0)
-+		return -EIO;
-+
-+	priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base);
-+	if (IS_ERR(priv->psgmii_hw_addr)) {
-+		dev_err(&pdev->dev, "psgmii ioremap fail!\n");
-+		return PTR_ERR(priv->psgmii_hw_addr);
-+	}
-+
-+	mac_mode = of_get_property(switch_node, "switch_mac_mode", &len);
-+	if (!mac_mode) {
-+		dev_err(&pdev->dev, "Failed to read switch_mac_mode\n");
-+		return -EINVAL;
-+	}
-+	priv->mac_mode = be32_to_cpup(mac_mode);
-+
-+	ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
-+	if (ess_clk)
-+		clk_prepare_enable(ess_clk);
-+
-+	priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst");
-+	if (IS_ERR(priv->ess_rst)) {
-+		dev_err(&pdev->dev, "Failed to get ess_rst control!\n");
-+		return PTR_ERR(priv->ess_rst);
-+	}
-+
-+	if (of_property_read_u32(switch_node, "switch_cpu_bmp",
-+				 &priv->cpu_bmp) ||
-+	    of_property_read_u32(switch_node, "switch_lan_bmp",
-+				 &priv->lan_bmp) ||
-+	    of_property_read_u32(switch_node, "switch_wan_bmp",
-+				 &priv->wan_bmp)) {
-+		dev_err(&pdev->dev, "Failed to read port properties\n");
-+		return -EIO;
-+	}
-+
-+	ret = phy_driver_register(&ar40xx_phy_driver, THIS_MODULE);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Failed to register ar40xx phy driver!\n");
-+		return -EIO;
-+	}
-+
-+	mutex_init(&priv->reg_mutex);
-+	mutex_init(&priv->mib_lock);
-+	INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func);
-+
-+	/* register switch */
-+	swdev = &priv->dev;
-+
-+	swdev->alias = dev_name(&priv->mii_bus->dev);
-+
-+	swdev->cpu_port = AR40XX_PORT_CPU;
-+	swdev->name = "QCA AR40xx";
-+	swdev->vlans = AR40XX_MAX_VLANS;
-+	swdev->ports = AR40XX_NUM_PORTS;
-+	swdev->ops = &ar40xx_sw_ops;
-+	ret = register_switch(swdev, NULL);
-+	if (ret)
-+		goto err_unregister_phy;
-+
-+	num_mibs = ARRAY_SIZE(ar40xx_mibs);
-+	len = priv->dev.ports * num_mibs *
-+	      sizeof(*priv->mib_stats);
-+	priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
-+	if (!priv->mib_stats) {
-+		ret = -ENOMEM;
-+		goto err_unregister_switch;
-+	}
-+
-+	ar40xx_start(priv);
-+
-+	if (of_property_read_bool(switch_node, "gpio-controller"))
-+		ar40xx_register_gpio(&pdev->dev, ar40xx_priv, switch_node);
-+
-+	return 0;
-+
-+err_unregister_switch:
-+	unregister_switch(&priv->dev);
-+err_unregister_phy:
-+	phy_driver_unregister(&ar40xx_phy_driver);
-+	platform_set_drvdata(pdev, NULL);
-+	return ret;
-+}
-+
-+static int ar40xx_remove(struct platform_device *pdev)
-+{
-+	struct ar40xx_priv *priv = platform_get_drvdata(pdev);
-+
-+	cancel_delayed_work_sync(&priv->qm_dwork);
-+	cancel_delayed_work_sync(&priv->mib_work);
-+
-+	unregister_switch(&priv->dev);
-+
-+	phy_driver_unregister(&ar40xx_phy_driver);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id ar40xx_of_mtable[] = {
-+	{.compatible = "qcom,ess-switch" },
-+	{}
-+};
-+
-+struct platform_driver ar40xx_drv = {
-+	.probe = ar40xx_probe,
-+	.remove = ar40xx_remove,
-+	.driver = {
-+		.name    = "ar40xx",
-+		.of_match_table = ar40xx_of_mtable,
-+	},
-+};
-+
-+module_platform_driver(ar40xx_drv);
-+
-+MODULE_DESCRIPTION("IPQ40XX ESS driver");
-+MODULE_LICENSE("Dual BSD/GPL");
---- /dev/null
-+++ b/drivers/net/phy/ar40xx.h
-@@ -0,0 +1,337 @@
-+/*
-+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+ #ifndef __AR40XX_H
-+#define __AR40XX_H
-+
-+#define AR40XX_MAX_VLANS	128
-+#define AR40XX_NUM_PORTS	6
-+#define AR40XX_NUM_PHYS	5
-+
-+#define BITS(_s, _n)	(((1UL << (_n)) - 1) << _s)
-+
-+struct ar40xx_priv {
-+	struct switch_dev dev;
-+
-+	u8  __iomem      *hw_addr;
-+	u8  __iomem      *psgmii_hw_addr;
-+	u32 mac_mode;
-+	struct reset_control *ess_rst;
-+	u32 cpu_bmp;
-+	u32 lan_bmp;
-+	u32 wan_bmp;
-+
-+	struct mii_bus *mii_bus;
-+	struct phy_device *phy;
-+
-+	/* mutex for qm task */
-+	struct mutex qm_lock;
-+	struct delayed_work qm_dwork;
-+	u32 port_link_up[AR40XX_NUM_PORTS];
-+	u32 ar40xx_port_old_link[AR40XX_NUM_PORTS];
-+	u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS];
-+
-+	u32 phy_t_status;
-+
-+	/* mutex for switch reg access */
-+	struct mutex reg_mutex;
-+
-+	/* mutex for mib task */
-+	struct mutex mib_lock;
-+	struct delayed_work mib_work;
-+	int mib_next_port;
-+	u64 *mib_stats;
-+
-+	char buf[2048];
-+
-+	/* all fields below will be cleared on reset */
-+	bool vlan;
-+	u16 vlan_id[AR40XX_MAX_VLANS];
-+	u8 vlan_table[AR40XX_MAX_VLANS];
-+	u8 vlan_tagged;
-+	u16 pvid[AR40XX_NUM_PORTS];
-+
-+	/* mirror */
-+	bool mirror_rx;
-+	bool mirror_tx;
-+	int source_port;
-+	int monitor_port;
-+};
-+
-+#define AR40XX_PORT_LINK_UP 1
-+#define AR40XX_PORT_LINK_DOWN 0
-+#define AR40XX_QM_NOT_EMPTY  1
-+#define AR40XX_QM_EMPTY  0
-+
-+#define AR40XX_LAN_VLAN	1
-+#define AR40XX_WAN_VLAN	2
-+
-+enum ar40xx_port_wrapper_cfg {
-+	PORT_WRAPPER_PSGMII = 0,
-+};
-+
-+struct ar40xx_mib_desc {
-+	u32 size;
-+	u32 offset;
-+	const char *name;
-+};
-+
-+#define AR40XX_PORT_CPU	0
-+
-+#define AR40XX_PSGMII_MODE_CONTROL	0x1b4
-+#define   AR40XX_PSGMII_ATHR_CSCO_MODE_25M	BIT(0)
-+
-+#define AR40XX_PSGMIIPHY_TX_CONTROL	 0x288
-+
-+#define AR40XX_MII_ATH_MMD_ADDR		0x0d
-+#define AR40XX_MII_ATH_MMD_DATA		0x0e
-+#define AR40XX_MII_ATH_DBG_ADDR		0x1d
-+#define AR40XX_MII_ATH_DBG_DATA		0x1e
-+
-+#define AR40XX_STATS_RXBROAD		0x00
-+#define AR40XX_STATS_RXPAUSE		0x04
-+#define AR40XX_STATS_RXMULTI		0x08
-+#define AR40XX_STATS_RXFCSERR		0x0c
-+#define AR40XX_STATS_RXALIGNERR		0x10
-+#define AR40XX_STATS_RXRUNT		0x14
-+#define AR40XX_STATS_RXFRAGMENT		0x18
-+#define AR40XX_STATS_RX64BYTE		0x1c
-+#define AR40XX_STATS_RX128BYTE		0x20
-+#define AR40XX_STATS_RX256BYTE		0x24
-+#define AR40XX_STATS_RX512BYTE		0x28
-+#define AR40XX_STATS_RX1024BYTE		0x2c
-+#define AR40XX_STATS_RX1518BYTE		0x30
-+#define AR40XX_STATS_RXMAXBYTE		0x34
-+#define AR40XX_STATS_RXTOOLONG		0x38
-+#define AR40XX_STATS_RXGOODBYTE		0x3c
-+#define AR40XX_STATS_RXBADBYTE		0x44
-+#define AR40XX_STATS_RXOVERFLOW		0x4c
-+#define AR40XX_STATS_FILTERED		0x50
-+#define AR40XX_STATS_TXBROAD		0x54
-+#define AR40XX_STATS_TXPAUSE		0x58
-+#define AR40XX_STATS_TXMULTI		0x5c
-+#define AR40XX_STATS_TXUNDERRUN		0x60
-+#define AR40XX_STATS_TX64BYTE		0x64
-+#define AR40XX_STATS_TX128BYTE		0x68
-+#define AR40XX_STATS_TX256BYTE		0x6c
-+#define AR40XX_STATS_TX512BYTE		0x70
-+#define AR40XX_STATS_TX1024BYTE		0x74
-+#define AR40XX_STATS_TX1518BYTE		0x78
-+#define AR40XX_STATS_TXMAXBYTE		0x7c
-+#define AR40XX_STATS_TXOVERSIZE		0x80
-+#define AR40XX_STATS_TXBYTE		0x84
-+#define AR40XX_STATS_TXCOLLISION	0x8c
-+#define AR40XX_STATS_TXABORTCOL		0x90
-+#define AR40XX_STATS_TXMULTICOL		0x94
-+#define AR40XX_STATS_TXSINGLECOL	0x98
-+#define AR40XX_STATS_TXEXCDEFER		0x9c
-+#define AR40XX_STATS_TXDEFER		0xa0
-+#define AR40XX_STATS_TXLATECOL		0xa4
-+
-+#define AR40XX_REG_MODULE_EN			0x030
-+#define   AR40XX_MODULE_EN_MIB			BIT(0)
-+
-+#define AR40XX_REG_MIB_FUNC			0x034
-+#define   AR40XX_MIB_BUSY		BIT(17)
-+#define   AR40XX_MIB_CPU_KEEP			BIT(20)
-+#define   AR40XX_MIB_FUNC		BITS(24, 3)
-+#define   AR40XX_MIB_FUNC_S		24
-+#define   AR40XX_MIB_FUNC_NO_OP		0x0
-+#define   AR40XX_MIB_FUNC_FLUSH		0x1
-+
-+#define AR40XX_REG_PORT_STATUS(_i)		(0x07c + (_i) * 4)
-+#define   AR40XX_PORT_SPEED			BITS(0, 2)
-+#define   AR40XX_PORT_STATUS_SPEED_S	0
-+#define   AR40XX_PORT_TX_EN			BIT(2)
-+#define   AR40XX_PORT_RX_EN			BIT(3)
-+#define   AR40XX_PORT_STATUS_TXFLOW	BIT(4)
-+#define   AR40XX_PORT_STATUS_RXFLOW	BIT(5)
-+#define   AR40XX_PORT_DUPLEX			BIT(6)
-+#define   AR40XX_PORT_TXHALF_FLOW		BIT(7)
-+#define   AR40XX_PORT_STATUS_LINK_UP	BIT(8)
-+#define   AR40XX_PORT_AUTO_LINK_EN		BIT(9)
-+#define   AR40XX_PORT_STATUS_FLOW_CONTROL  BIT(12)
-+
-+#define AR40XX_REG_MAX_FRAME_SIZE		0x078
-+#define   AR40XX_MAX_FRAME_SIZE_MTU		BITS(0, 14)
-+
-+#define AR40XX_REG_PORT_HEADER(_i)		(0x09c + (_i) * 4)
-+
-+#define AR40XX_REG_EEE_CTRL			0x100
-+#define   AR40XX_EEE_CTRL_DISABLE_PHY(_i)	BIT(4 + (_i) * 2)
-+
-+#define AR40XX_REG_PORT_VLAN0(_i)		(0x420 + (_i) * 0x8)
-+#define   AR40XX_PORT_VLAN0_DEF_SVID		BITS(0, 12)
-+#define   AR40XX_PORT_VLAN0_DEF_SVID_S		0
-+#define   AR40XX_PORT_VLAN0_DEF_CVID		BITS(16, 12)
-+#define   AR40XX_PORT_VLAN0_DEF_CVID_S		16
-+
-+#define AR40XX_REG_PORT_VLAN1(_i)		(0x424 + (_i) * 0x8)
-+#define   AR40XX_PORT_VLAN1_PORT_VLAN_PROP	BIT(6)
-+#define   AR40XX_PORT_VLAN1_OUT_MODE		BITS(12, 2)
-+#define   AR40XX_PORT_VLAN1_OUT_MODE_S		12
-+#define   AR40XX_PORT_VLAN1_OUT_MODE_UNMOD	0
-+#define   AR40XX_PORT_VLAN1_OUT_MODE_UNTAG	1
-+#define   AR40XX_PORT_VLAN1_OUT_MODE_TAG		2
-+#define   AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH	3
-+
-+#define AR40XX_REG_VTU_FUNC0			0x0610
-+#define   AR40XX_VTU_FUNC0_EG_MODE		BITS(4, 14)
-+#define   AR40XX_VTU_FUNC0_EG_MODE_S(_i)	(4 + (_i) * 2)
-+#define   AR40XX_VTU_FUNC0_EG_MODE_KEEP		0
-+#define   AR40XX_VTU_FUNC0_EG_MODE_UNTAG	1
-+#define   AR40XX_VTU_FUNC0_EG_MODE_TAG		2
-+#define   AR40XX_VTU_FUNC0_EG_MODE_NOT		3
-+#define   AR40XX_VTU_FUNC0_IVL			BIT(19)
-+#define   AR40XX_VTU_FUNC0_VALID		BIT(20)
-+
-+#define AR40XX_REG_VTU_FUNC1			0x0614
-+#define   AR40XX_VTU_FUNC1_OP			BITS(0, 3)
-+#define   AR40XX_VTU_FUNC1_OP_NOOP		0
-+#define   AR40XX_VTU_FUNC1_OP_FLUSH		1
-+#define   AR40XX_VTU_FUNC1_OP_LOAD		2
-+#define   AR40XX_VTU_FUNC1_OP_PURGE		3
-+#define   AR40XX_VTU_FUNC1_OP_REMOVE_PORT	4
-+#define   AR40XX_VTU_FUNC1_OP_GET_NEXT		5
-+#define   AR40XX7_VTU_FUNC1_OP_GET_ONE		6
-+#define   AR40XX_VTU_FUNC1_FULL			BIT(4)
-+#define   AR40XX_VTU_FUNC1_PORT			BIT(8, 4)
-+#define   AR40XX_VTU_FUNC1_PORT_S		8
-+#define   AR40XX_VTU_FUNC1_VID			BIT(16, 12)
-+#define   AR40XX_VTU_FUNC1_VID_S		16
-+#define   AR40XX_VTU_FUNC1_BUSY			BIT(31)
-+
-+#define AR40XX_REG_FWD_CTRL0			0x620
-+#define   AR40XX_FWD_CTRL0_CPU_PORT_EN		BIT(10)
-+#define   AR40XX_FWD_CTRL0_MIRROR_PORT		BITS(4, 4)
-+#define   AR40XX_FWD_CTRL0_MIRROR_PORT_S	4
-+
-+#define AR40XX_REG_FWD_CTRL1			0x624
-+#define   AR40XX_FWD_CTRL1_UC_FLOOD		BITS(0, 7)
-+#define   AR40XX_FWD_CTRL1_UC_FLOOD_S		0
-+#define   AR40XX_FWD_CTRL1_MC_FLOOD		BITS(8, 7)
-+#define   AR40XX_FWD_CTRL1_MC_FLOOD_S		8
-+#define   AR40XX_FWD_CTRL1_BC_FLOOD		BITS(16, 7)
-+#define   AR40XX_FWD_CTRL1_BC_FLOOD_S		16
-+#define   AR40XX_FWD_CTRL1_IGMP			BITS(24, 7)
-+#define   AR40XX_FWD_CTRL1_IGMP_S		24
-+
-+#define AR40XX_REG_PORT_LOOKUP(_i)		(0x660 + (_i) * 0xc)
-+#define   AR40XX_PORT_LOOKUP_MEMBER		BITS(0, 7)
-+#define   AR40XX_PORT_LOOKUP_IN_MODE		BITS(8, 2)
-+#define   AR40XX_PORT_LOOKUP_IN_MODE_S		8
-+#define   AR40XX_PORT_LOOKUP_STATE		BITS(16, 3)
-+#define   AR40XX_PORT_LOOKUP_STATE_S		16
-+#define   AR40XX_PORT_LOOKUP_LEARN		BIT(20)
-+#define   AR40XX_PORT_LOOKUP_LOOPBACK		BIT(21)
-+#define   AR40XX_PORT_LOOKUP_ING_MIRROR_EN	BIT(25)
-+
-+#define AR40XX_REG_ATU_FUNC			0x60c
-+#define   AR40XX_ATU_FUNC_OP			BITS(0, 4)
-+#define   AR40XX_ATU_FUNC_OP_NOOP		0x0
-+#define   AR40XX_ATU_FUNC_OP_FLUSH		0x1
-+#define   AR40XX_ATU_FUNC_OP_LOAD		0x2
-+#define   AR40XX_ATU_FUNC_OP_PURGE		0x3
-+#define   AR40XX_ATU_FUNC_OP_FLUSH_LOCKED	0x4
-+#define   AR40XX_ATU_FUNC_OP_FLUSH_UNICAST	0x5
-+#define   AR40XX_ATU_FUNC_OP_GET_NEXT		0x6
-+#define   AR40XX_ATU_FUNC_OP_SEARCH_MAC		0x7
-+#define   AR40XX_ATU_FUNC_OP_CHANGE_TRUNK	0x8
-+#define   AR40XX_ATU_FUNC_BUSY			BIT(31)
-+
-+#define AR40XX_REG_QM_DEBUG_ADDR		0x820
-+#define AR40XX_REG_QM_DEBUG_VALUE		0x824
-+#define   AR40XX_REG_QM_PORT0_3_QNUM		0x1d
-+#define   AR40XX_REG_QM_PORT4_6_QNUM		0x1e
-+
-+#define AR40XX_REG_PORT_HOL_CTRL1(_i)		(0x974 + (_i) * 0x8)
-+#define   AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN	BIT(16)
-+
-+#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i)	(0x9b0 + (_i) * 0x4)
-+#define   AR40XX_PORT0_FC_THRESH_ON_DFLT	0x60
-+#define   AR40XX_PORT0_FC_THRESH_OFF_DFLT	0x90
-+
-+#define AR40XX_PHY_DEBUG_0   0
-+#define AR40XX_PHY_MANU_CTRL_EN  BIT(12)
-+
-+#define AR40XX_PHY_DEBUG_2   2
-+
-+#define AR40XX_PHY_SPEC_STATUS 0x11
-+#define   AR40XX_PHY_SPEC_STATUS_LINK		BIT(10)
-+#define   AR40XX_PHY_SPEC_STATUS_DUPLEX		BIT(13)
-+#define   AR40XX_PHY_SPEC_STATUS_SPEED		BITS(14, 2)
-+
-+/* port forwarding state */
-+enum {
-+	AR40XX_PORT_STATE_DISABLED = 0,
-+	AR40XX_PORT_STATE_BLOCK = 1,
-+	AR40XX_PORT_STATE_LISTEN = 2,
-+	AR40XX_PORT_STATE_LEARN = 3,
-+	AR40XX_PORT_STATE_FORWARD = 4
-+};
-+
-+/* ingress 802.1q mode */
-+enum {
-+	AR40XX_IN_PORT_ONLY = 0,
-+	AR40XX_IN_PORT_FALLBACK = 1,
-+	AR40XX_IN_VLAN_ONLY = 2,
-+	AR40XX_IN_SECURE = 3
-+};
-+
-+/* egress 802.1q mode */
-+enum {
-+	AR40XX_OUT_KEEP = 0,
-+	AR40XX_OUT_STRIP_VLAN = 1,
-+	AR40XX_OUT_ADD_VLAN = 2
-+};
-+
-+/* port speed */
-+enum {
-+	AR40XX_PORT_SPEED_10M = 0,
-+	AR40XX_PORT_SPEED_100M = 1,
-+	AR40XX_PORT_SPEED_1000M = 2,
-+	AR40XX_PORT_SPEED_ERR = 3,
-+};
-+
-+#define AR40XX_MIB_WORK_DELAY	2000 /* msecs */
-+
-+#define AR40XX_QM_WORK_DELAY    100
-+
-+#define   AR40XX_MIB_FUNC_CAPTURE	0x3
-+
-+#define AR40XX_REG_PORT_STATS_START	0x1000
-+#define AR40XX_REG_PORT_STATS_LEN		0x100
-+
-+#define AR40XX_PORTS_ALL	0x3f
-+
-+#define AR40XX_PSGMII_ID	5
-+#define AR40XX_PSGMII_CALB_NUM	100
-+#define AR40XX_MALIBU_PSGMII_MODE_CTRL	0x6d
-+#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL	0x220c
-+#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL	0x801a
-+#define AR40XX_MALIBU_DAC_CTRL_MASK	0x380
-+#define AR40XX_MALIBU_DAC_CTRL_VALUE	0x280
-+#define AR40XX_MALIBU_PHY_RLP_CTRL       0x805a
-+#define AR40XX_PSGMII_TX_DRIVER_1_CTRL	0xb
-+#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP	0x8a
-+#define AR40XX_MALIBU_PHY_LAST_ADDR	4
-+
-+static inline struct ar40xx_priv *
-+swdev_to_ar40xx(struct switch_dev *swdev)
-+{
-+	return container_of(swdev, struct ar40xx_priv, dev);
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/phy/mdio-ipq40xx.c
-@@ -0,0 +1,203 @@
-+/*
-+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/io.h>
-+#include <linux/of_address.h>
-+#include <linux/of_mdio.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
-+
-+#define MDIO_CTRL_0_REG		0x40
-+#define MDIO_CTRL_1_REG		0x44
-+#define MDIO_CTRL_2_REG		0x48
-+#define MDIO_CTRL_3_REG		0x4c
-+#define MDIO_CTRL_4_REG		0x50
-+#define MDIO_CTRL_4_ACCESS_BUSY		BIT(16)
-+#define MDIO_CTRL_4_ACCESS_START		BIT(8)
-+#define MDIO_CTRL_4_ACCESS_CODE_READ		0
-+#define MDIO_CTRL_4_ACCESS_CODE_WRITE	1
-+#define CTRL_0_REG_DEFAULT_VALUE	0x150FF
-+
-+#define IPQ40XX_MDIO_RETRY	1000
-+#define IPQ40XX_MDIO_DELAY	10
-+
-+struct ipq40xx_mdio_data {
-+	struct mii_bus	*mii_bus;
-+	void __iomem	*membase;
-+	int		phy_irq[PHY_MAX_ADDR];
-+	struct device	*dev;
-+};
-+
-+static int ipq40xx_mdio_wait_busy(struct ipq40xx_mdio_data *am)
-+{
-+	int i;
-+
-+	for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) {
-+		unsigned int busy;
-+
-+		busy = readl(am->membase + MDIO_CTRL_4_REG) &
-+			MDIO_CTRL_4_ACCESS_BUSY;
-+		if (!busy)
-+			return 0;
-+
-+		/* BUSY might take to be cleard by 15~20 times of loop */
-+		udelay(IPQ40XX_MDIO_DELAY);
-+	}
-+
-+	dev_err(am->dev, "%s: MDIO operation timed out\n", am->mii_bus->name);
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-+{
-+	struct ipq40xx_mdio_data *am = bus->priv;
-+	int value = 0;
-+	unsigned int cmd = 0;
-+
-+	lockdep_assert_held(&bus->mdio_lock);
-+
-+	if (ipq40xx_mdio_wait_busy(am))
-+		return -ETIMEDOUT;
-+
-+	/* issue the phy address and reg */
-+	writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
-+
-+	cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_READ;
-+
-+	/* issue read command */
-+	writel(cmd, am->membase + MDIO_CTRL_4_REG);
-+
-+	/* Wait read complete */
-+	if (ipq40xx_mdio_wait_busy(am))
-+		return -ETIMEDOUT;
-+
-+	/* Read data */
-+	value = readl(am->membase + MDIO_CTRL_3_REG);
-+
-+	return value;
-+}
-+
-+static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+			    u16 value)
-+{
-+	struct ipq40xx_mdio_data *am = bus->priv;
-+	unsigned int cmd = 0;
-+
-+	lockdep_assert_held(&bus->mdio_lock);
-+
-+	if (ipq40xx_mdio_wait_busy(am))
-+		return -ETIMEDOUT;
-+
-+	/* issue the phy address and reg */
-+	writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
-+
-+	/* issue write data */
-+	writel(value, am->membase + MDIO_CTRL_2_REG);
-+
-+	cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_WRITE;
-+	/* issue write command */
-+	writel(cmd, am->membase + MDIO_CTRL_4_REG);
-+
-+	/* Wait write complete */
-+	if (ipq40xx_mdio_wait_busy(am))
-+		return -ETIMEDOUT;
-+
-+	return 0;
-+}
-+
-+static int ipq40xx_mdio_probe(struct platform_device *pdev)
-+{
-+	struct ipq40xx_mdio_data *am;
-+	struct resource *res;
-+	int i;
-+
-+	am = devm_kzalloc(&pdev->dev, sizeof(*am), GFP_KERNEL);
-+	if (!am)
-+		return -ENOMEM;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		dev_err(&pdev->dev, "no iomem resource found\n");
-+		return -ENXIO;
-+	}
-+
-+	am->membase = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(am->membase)) {
-+		dev_err(&pdev->dev, "unable to ioremap registers\n");
-+		return PTR_ERR(am->membase);
-+	}
-+
-+	am->mii_bus = devm_mdiobus_alloc(&pdev->dev);
-+	if (!am->mii_bus)
-+		return  -ENOMEM;
-+
-+	writel(CTRL_0_REG_DEFAULT_VALUE, am->membase + MDIO_CTRL_0_REG);
-+
-+	am->mii_bus->name = "ipq40xx_mdio";
-+	am->mii_bus->read = ipq40xx_mdio_read;
-+	am->mii_bus->write = ipq40xx_mdio_write;
-+	am->mii_bus->priv = am;
-+	am->mii_bus->parent = &pdev->dev;
-+	snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
-+
-+	for (i = 0; i < PHY_MAX_ADDR; i++)
-+		am->phy_irq[i] = PHY_POLL;
-+
-+	memcpy(am->mii_bus->irq, am->phy_irq, sizeof(am->phy_irq));
-+	am->dev = &pdev->dev;
-+	platform_set_drvdata(pdev, am);
-+
-+	/* edma_axi_probe() use "am" drvdata.
-+	 * ipq40xx_mdio_probe() must be called first.
-+	 */
-+	return of_mdiobus_register(am->mii_bus, pdev->dev.of_node);
-+}
-+
-+static int ipq40xx_mdio_remove(struct platform_device *pdev)
-+{
-+	struct ipq40xx_mdio_data *am = platform_get_drvdata(pdev);
-+
-+	mdiobus_unregister(am->mii_bus);
-+	return 0;
-+}
-+
-+static const struct of_device_id ipq40xx_mdio_dt_ids[] = {
-+	{ .compatible = "qcom,ipq4019-mdio" },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, ipq40xx_mdio_dt_ids);
-+
-+static struct platform_driver ipq40xx_mdio_driver = {
-+	.probe = ipq40xx_mdio_probe,
-+	.remove = ipq40xx_mdio_remove,
-+	.driver = {
-+		.name = "ipq40xx-mdio",
-+		.of_match_table = ipq40xx_mdio_dt_ids,
-+	},
-+};
-+
-+module_platform_driver(ipq40xx_mdio_driver);
-+
-+#define DRV_VERSION     "1.0"
-+
-+MODULE_DESCRIPTION("IPQ40XX MDIO interface driver");
-+MODULE_AUTHOR("Qualcomm Atheros");
-+MODULE_VERSION(DRV_VERSION);
-+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch
deleted file mode 100644
index 0e1bb87368..0000000000
--- a/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:10:33 +0100
-Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
-
-This patch adds the mdio device-tree node.
-This is where the switch is connected to, so it's needed
-for the ethernet interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -566,6 +566,34 @@
- 			status = "disabled";
- 		};
- 
-+		mdio@90000 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			compatible = "qcom,ipq4019-mdio";
-+			reg = <0x90000 0x64>;
-+			status = "disabled";
-+
-+			ethernet-phy@0 {
-+				reg = <0>;
-+			};
-+
-+			ethernet-phy@1 {
-+				reg = <1>;
-+			};
-+
-+			ethernet-phy@2 {
-+				reg = <2>;
-+			};
-+
-+			ethernet-phy@3 {
-+				reg = <3>;
-+			};
-+
-+			ethernet-phy@4 {
-+				reg = <4>;
-+			};
-+		};
-+
- 		usb3_ss_phy: ssphy@9a000 {
- 			compatible = "qcom,usb-ss-ipq4019-phy";
- 			#phy-cells = <0>;
diff --git a/target/linux/ipq40xx/patches-4.19/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-4.19/702-dts-ipq4019-add-PHY-switch-nodes.patch
deleted file mode 100644
index 03da6c863a..0000000000
--- a/target/linux/ipq40xx/patches-4.19/702-dts-ipq4019-add-PHY-switch-nodes.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 02:20:54 +0100
-Subject: [PATCH] dts: ipq4019: add PHY/switch nodes
-
-This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii"
-nodes which are needed for the ar40xx.c driver to initialize the
-switch.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -594,6 +594,29 @@
- 			};
- 		};
- 
-+		ess-switch@c000000 {
-+			compatible = "qcom,ess-switch";
-+			reg = <0xc000000 0x80000>;
-+			switch_access_mode = "local bus";
-+			resets = <&gcc ESS_RESET>;
-+			reset-names = "ess_rst";
-+			clocks = <&gcc GCC_ESS_CLK>;
-+			clock-names = "ess_clk";
-+			switch_cpu_bmp = <0x1>;
-+			switch_lan_bmp = <0x1e>;
-+			switch_wan_bmp = <0x20>;
-+			switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */
-+			switch_initvlas = <0x7c 0x54>;
-+			status = "disabled";
-+		};
-+
-+		ess-psgmii@98000 {
-+			compatible = "qcom,ess-psgmii";
-+			reg = <0x98000 0x800>;
-+			psgmii_access_mode = "local bus";
-+			status = "disabled";
-+		};
-+
- 		usb3_ss_phy: ssphy@9a000 {
- 			compatible = "qcom,usb-ss-ipq4019-phy";
- 			#phy-cells = <0>;
diff --git a/target/linux/ipq40xx/patches-4.19/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq40xx/patches-4.19/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
deleted file mode 100644
index cc7e49736d..0000000000
--- a/target/linux/ipq40xx/patches-4.19/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001
-From: Rakesh Nair <ranair@codeaurora.org>
-Date: Wed, 20 Jul 2016 15:02:01 +0530
-Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in
- netdev_ops
-
-Add callback support to get default vlan tag and register
-receive flow steering filter.
-
-Used by IPQ4019 ess-edma driver.
-
-BUG=chrome-os-partner:33096
-TEST=none
-
-Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75
-Signed-off-by: Rakesh Nair <ranair@codeaurora.org>
-Reviewed-on: https://chromium-review.googlesource.com/362203
-Commit-Ready: Grant Grundler <grundler@chromium.org>
-Tested-by: Grant Grundler <grundler@chromium.org>
-Reviewed-by: Grant Grundler <grundler@chromium.org>
----
- include/linux/netdevice.h | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -739,6 +739,16 @@ struct xps_map {
- #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
-        - sizeof(struct xps_map)) / sizeof(u16))
- 
-+#ifdef CONFIG_RFS_ACCEL
-+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev,
-+                                     __be32 src,
-+                                     __be32 dst,
-+                                     __be16 sport,
-+                                     __be16 dport,
-+                                     u8 proto,
-+                                     u16 rxq_index,
-+                                     u32 action);
-+#endif
- /*
-  * This structure holds all XPS maps for device.  Maps are indexed by CPU.
-  */
-@@ -1353,6 +1363,9 @@ struct net_device_ops {
- 						     const struct sk_buff *skb,
- 						     u16 rxq_index,
- 						     u32 flow_id);
-+        int                     (*ndo_register_rfs_filter)(struct net_device *dev,
-+                                                              set_rfs_filter_callback_t set_filter);
-+        int                     (*ndo_get_default_vlan_tag)(struct net_device *net);
- #endif
- 	int			(*ndo_add_slave)(struct net_device *dev,
- 						 struct net_device *slave_dev,
diff --git a/target/linux/ipq40xx/patches-4.19/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq40xx/patches-4.19/710-net-add-qualcomm-essedma-ethernet-driver.patch
deleted file mode 100644
index 9fe3a1a9d6..0000000000
--- a/target/linux/ipq40xx/patches-4.19/710-net-add-qualcomm-essedma-ethernet-driver.patch
+++ /dev/null
@@ -1,4575 +0,0 @@
-From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 19 Jan 2017 02:01:31 +0100
-Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/net/ethernet/qualcomm/Kconfig  | 9 +++++++++
- drivers/net/ethernet/qualcomm/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/net/ethernet/qualcomm/Kconfig
-+++ b/drivers/net/ethernet/qualcomm/Kconfig
-@@ -61,4 +61,13 @@ config QCOM_EMAC
- 
- source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
- 
-+config ESSEDMA
-+	tristate "Qualcomm Atheros ESS Edma support"
-+	---help---
-+	  This driver supports ethernet edma adapter.
-+	  Say Y to build this driver.
-+
-+	  To compile this driver as a module, choose M here. The module
-+	  will be called essedma.ko.
-+
- endif # NET_VENDOR_QUALCOMM
---- a/drivers/net/ethernet/qualcomm/Makefile
-+++ b/drivers/net/ethernet/qualcomm/Makefile
-@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o
- qcauart-objs := qca_uart.o
- 
- obj-y += emac/
-+obj-$(CONFIG_ESSEDMA) += essedma/
- 
- obj-$(CONFIG_RMNET) += rmnet/
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/Makefile
-@@ -0,0 +1,9 @@
-+#
-+## Makefile for the Qualcomm Atheros ethernet edma driver
-+#
-+
-+
-+obj-$(CONFIG_ESSEDMA) += essedma.o
-+
-+essedma-objs := edma_axi.o edma.o edma_ethtool.o
-+
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
-@@ -0,0 +1,2143 @@
-+/*
-+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/if_vlan.h>
-+#include "ess_edma.h"
-+#include "edma.h"
-+
-+extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
-+bool edma_stp_rstp;
-+u16 edma_ath_eth_type;
-+
-+/* edma_skb_priority_offset()
-+ * 	get edma skb priority
-+ */
-+static unsigned int edma_skb_priority_offset(struct sk_buff *skb)
-+{
-+	return (skb->priority >> 2) & 1;
-+}
-+
-+/* edma_alloc_tx_ring()
-+ *	Allocate Tx descriptors ring
-+ */
-+static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo,
-+			      struct edma_tx_desc_ring *etdr)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+
-+	/* Initialize ring */
-+	etdr->size = sizeof(struct edma_sw_desc) * etdr->count;
-+	etdr->sw_next_to_fill = 0;
-+	etdr->sw_next_to_clean = 0;
-+
-+	/* Allocate SW descriptors */
-+	etdr->sw_desc = vzalloc(etdr->size);
-+	if (!etdr->sw_desc) {
-+		dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr);
-+		return -ENOMEM;
-+	}
-+
-+	/* Allocate HW descriptors */
-+	etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma,
-+					  GFP_KERNEL);
-+	if (!etdr->hw_desc) {
-+		dev_err(&pdev->dev, "descriptor allocation for tx ring failed");
-+		vfree(etdr->sw_desc);
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+/* edma_free_tx_ring()
-+ *	Free tx rings allocated by edma_alloc_tx_rings
-+ */
-+static void edma_free_tx_ring(struct edma_common_info *edma_cinfo,
-+			      struct edma_tx_desc_ring *etdr)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+
-+	if (likely(etdr->dma))
-+		dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc,
-+				 etdr->dma);
-+
-+	vfree(etdr->sw_desc);
-+	etdr->sw_desc = NULL;
-+}
-+
-+/* edma_alloc_rx_ring()
-+ *	allocate rx descriptor ring
-+ */
-+static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo,
-+			     struct edma_rfd_desc_ring *erxd)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+
-+	erxd->size = sizeof(struct edma_sw_desc) * erxd->count;
-+	erxd->sw_next_to_fill = 0;
-+	erxd->sw_next_to_clean = 0;
-+
-+	/* Allocate SW descriptors */
-+	erxd->sw_desc = vzalloc(erxd->size);
-+	if (!erxd->sw_desc)
-+		return -ENOMEM;
-+
-+	/* Alloc HW descriptors */
-+	erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma,
-+			GFP_KERNEL);
-+	if (!erxd->hw_desc) {
-+		vfree(erxd->sw_desc);
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+/* edma_free_rx_ring()
-+ *	Free rx ring allocated by alloc_rx_ring
-+ */
-+static void edma_free_rx_ring(struct edma_common_info *edma_cinfo,
-+			     struct edma_rfd_desc_ring *rxdr)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+
-+	if (likely(rxdr->dma))
-+		dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc,
-+				 rxdr->dma);
-+
-+	vfree(rxdr->sw_desc);
-+	rxdr->sw_desc = NULL;
-+}
-+
-+/* edma_configure_tx()
-+ *	Configure transmission control data
-+ */
-+static void edma_configure_tx(struct edma_common_info *edma_cinfo)
-+{
-+	u32 txq_ctrl_data;
-+
-+	txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT);
-+	txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN;
-+	txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT);
-+	edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data);
-+}
-+
-+
-+/* edma_configure_rx()
-+ *	configure reception control data
-+ */
-+static void edma_configure_rx(struct edma_common_info *edma_cinfo)
-+{
-+	struct edma_hw *hw = &edma_cinfo->hw;
-+	u32 rss_type, rx_desc1, rxq_ctrl_data;
-+
-+	/* Set RSS type */
-+	rss_type = hw->rss_type;
-+	edma_write_reg(EDMA_REG_RSS_TYPE, rss_type);
-+
-+	/* Set RFD burst number */
-+	rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT);
-+
-+	/* Set RFD prefetch threshold */
-+	rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT);
-+
-+	/* Set RFD in host ring low threshold to generte interrupt */
-+	rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT);
-+	edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1);
-+
-+	/* Set Rx FIFO threshold to start to DMA data to host */
-+	rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
-+
-+	/* Set RX remove vlan bit */
-+	rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
-+
-+	edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
-+}
-+
-+/* edma_alloc_rx_buf()
-+ *	does skb allocation for the received packets.
-+ */
-+static int edma_alloc_rx_buf(struct edma_common_info
-+			     *edma_cinfo,
-+			     struct edma_rfd_desc_ring *erdr,
-+			     int cleaned_count, int queue_id)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	struct edma_rx_free_desc *rx_desc;
-+	struct edma_sw_desc *sw_desc;
-+	struct sk_buff *skb;
-+	unsigned int i;
-+	u16 prod_idx, length;
-+	u32 reg_data;
-+
-+	if (cleaned_count > erdr->count) {
-+		dev_err(&pdev->dev, "Incorrect cleaned_count %d",
-+		       cleaned_count);
-+		return -1;
-+	}
-+
-+	i = erdr->sw_next_to_fill;
-+
-+	while (cleaned_count) {
-+		sw_desc = &erdr->sw_desc[i];
-+		length = edma_cinfo->rx_head_buffer_len;
-+
-+		if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
-+			skb = sw_desc->skb;
-+		} else {
-+			/* alloc skb */
-+			skb = netdev_alloc_skb(edma_netdev[0], length);
-+			if (!skb) {
-+				/* Better luck next round */
-+				break;
-+			}
-+		}
-+
-+		if (edma_cinfo->page_mode) {
-+			struct page *pg = alloc_page(GFP_ATOMIC);
-+
-+			if (!pg) {
-+				dev_kfree_skb_any(skb);
-+				break;
-+			}
-+
-+			sw_desc->dma = dma_map_page(&pdev->dev, pg, 0,
-+						   edma_cinfo->rx_page_buffer_len,
-+						   DMA_FROM_DEVICE);
-+			if (dma_mapping_error(&pdev->dev,
-+				    sw_desc->dma)) {
-+				__free_page(pg);
-+				dev_kfree_skb_any(skb);
-+				break;
-+			}
-+
-+			skb_fill_page_desc(skb, 0, pg, 0,
-+					   edma_cinfo->rx_page_buffer_len);
-+			sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG;
-+			sw_desc->length = edma_cinfo->rx_page_buffer_len;
-+		} else {
-+			sw_desc->dma = dma_map_single(&pdev->dev, skb->data,
-+						     length, DMA_FROM_DEVICE);
-+			if (dma_mapping_error(&pdev->dev,
-+			   sw_desc->dma)) {
-+				dev_kfree_skb_any(skb);
-+				break;
-+			}
-+
-+			sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD;
-+			sw_desc->length = length;
-+		}
-+
-+		/* Update the buffer info */
-+		sw_desc->skb = skb;
-+		rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]);
-+		rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma);
-+		if (++i == erdr->count)
-+			i = 0;
-+		cleaned_count--;
-+	}
-+
-+	erdr->sw_next_to_fill = i;
-+
-+	if (i == 0)
-+		prod_idx = erdr->count - 1;
-+	else
-+		prod_idx = i - 1;
-+
-+	/* Update the producer index */
-+	edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &reg_data);
-+	reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
-+	reg_data |= prod_idx;
-+	edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
-+	return cleaned_count;
-+}
-+
-+/* edma_init_desc()
-+ *	update descriptor ring size, buffer and producer/consumer index
-+ */
-+static void edma_init_desc(struct edma_common_info *edma_cinfo)
-+{
-+	struct edma_rfd_desc_ring *rfd_ring;
-+	struct edma_tx_desc_ring *etdr;
-+	int i = 0, j = 0;
-+	u32 data = 0;
-+	u16 hw_cons_idx = 0;
-+
-+	/* Set the base address of every TPD ring. */
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+		etdr = edma_cinfo->tpd_ring[i];
-+
-+		/* Update descriptor ring base address */
-+		edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma);
-+		edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data);
-+
-+		/* Calculate hardware consumer index */
-+		hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff;
-+		etdr->sw_next_to_fill = hw_cons_idx;
-+		etdr->sw_next_to_clean = hw_cons_idx;
-+		data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT);
-+		data |= hw_cons_idx;
-+
-+		/* update producer index */
-+		edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data);
-+
-+		/* update SW consumer index register */
-+		edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx);
-+
-+		/* Set TPD ring size */
-+		edma_write_reg(EDMA_REG_TPD_RING_SIZE,
-+			       edma_cinfo->tx_ring_count &
-+				    EDMA_TPD_RING_SIZE_MASK);
-+	}
-+
-+	for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+		rfd_ring = edma_cinfo->rfd_ring[j];
-+		/* Update Receive Free descriptor ring base address */
-+		edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j),
-+			(u32)(rfd_ring->dma));
-+		j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+	}
-+
-+	data = edma_cinfo->rx_head_buffer_len;
-+	if (edma_cinfo->page_mode)
-+		data = edma_cinfo->rx_page_buffer_len;
-+
-+	data &= EDMA_RX_BUF_SIZE_MASK;
-+	data <<= EDMA_RX_BUF_SIZE_SHIFT;
-+
-+	/* Update RFD ring size and RX buffer size */
-+	data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK)
-+		<< EDMA_RFD_RING_SIZE_SHIFT;
-+
-+	edma_write_reg(EDMA_REG_RX_DESC0, data);
-+
-+	/* Disable TX FIFO low watermark and high watermark */
-+	edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0);
-+
-+	/* Load all of base address above */
-+	edma_read_reg(EDMA_REG_TX_SRAM_PART, &data);
-+	data |= 1 << EDMA_LOAD_PTR_SHIFT;
-+	edma_write_reg(EDMA_REG_TX_SRAM_PART, data);
-+}
-+
-+/* edma_receive_checksum
-+ *	Api to check checksum on receive packets
-+ */
-+static void edma_receive_checksum(struct edma_rx_return_desc *rd,
-+						 struct sk_buff *skb)
-+{
-+	skb_checksum_none_assert(skb);
-+
-+	/* check the RRD IP/L4 checksum bit to see if
-+	 * its set, which in turn indicates checksum
-+	 * failure.
-+	 */
-+	if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK)
-+		return;
-+
-+	skb->ip_summed = CHECKSUM_UNNECESSARY;
-+}
-+
-+/* edma_clean_rfd()
-+ *	clean up rx resourcers on error
-+ */
-+static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index)
-+{
-+	struct edma_rx_free_desc *rx_desc;
-+	struct edma_sw_desc *sw_desc;
-+
-+	rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]);
-+	sw_desc = &erdr->sw_desc[index];
-+	if (sw_desc->skb) {
-+		dev_kfree_skb_any(sw_desc->skb);
-+		sw_desc->skb = NULL;
-+	}
-+
-+	memset(rx_desc, 0, sizeof(struct edma_rx_free_desc));
-+}
-+
-+/* edma_rx_complete_fraglist()
-+ *	Complete Rx processing for fraglist skbs
-+ */
-+static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd)
-+{
-+	int i;
-+	u32 priority;
-+	u16 port_type;
-+	u8 mac_addr[EDMA_ETH_HDR_LEN];
-+
-+	port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT)
-+		                & EDMA_RRD_PORT_TYPE_MASK;
-+	/* if port type is 0x4, then only proceed with
-+	 * other stp/rstp calculation
-+	 */
-+	if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) {
-+		u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00};
-+
-+		/* calculate the frame priority */
-+		priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
-+			& EDMA_RRD_PRIORITY_MASK;
-+
-+		for (i = 0; i < EDMA_ETH_HDR_LEN; i++)
-+			mac_addr[i] = skb->data[i];
-+
-+		/* Check if destination mac addr is bpdu addr */
-+		if (!memcmp(mac_addr, bpdu_mac, 6)) {
-+			/* destination mac address is BPDU
-+			 * destination mac address, then add
-+			 * atheros header to the packet.
-+			 */
-+			u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) |
-+				(priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) |
-+				(EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id;
-+			skb_push(skb, 4);
-+			memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
-+			*(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type);
-+			*(uint16_t *)&skb->data[14] = htons(athr_hdr);
-+		}
-+	}
-+}
-+
-+/*
-+ * edma_rx_complete_fraglist()
-+ *	Complete Rx processing for fraglist skbs
-+ */
-+static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
-+					u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	struct edma_hw *hw = &edma_cinfo->hw;
-+	struct sk_buff *skb_temp;
-+	struct edma_sw_desc *sw_desc;
-+	int i;
-+	u16 size_remaining;
-+
-+	skb->data_len = 0;
-+	skb->tail += (hw->rx_head_buff_size - 16);
-+	skb->len = skb->truesize = length;
-+	size_remaining = length - (hw->rx_head_buff_size - 16);
-+
-+	/* clean-up all related sw_descs */
-+	for (i = 1; i < num_rfds; i++) {
-+		struct sk_buff *skb_prev;
-+		sw_desc = &erdr->sw_desc[sw_next_to_clean];
-+		skb_temp = sw_desc->skb;
-+
-+		dma_unmap_single(&pdev->dev, sw_desc->dma,
-+			sw_desc->length, DMA_FROM_DEVICE);
-+
-+		if (size_remaining < hw->rx_head_buff_size)
-+			skb_put(skb_temp, size_remaining);
-+		else
-+			skb_put(skb_temp, hw->rx_head_buff_size);
-+
-+		/*
-+		 * If we are processing the first rfd, we link
-+		 * skb->frag_list to the skb corresponding to the
-+		 * first RFD
-+		 */
-+		if (i == 1)
-+			skb_shinfo(skb)->frag_list = skb_temp;
-+		else
-+			skb_prev->next = skb_temp;
-+		skb_prev = skb_temp;
-+		skb_temp->next = NULL;
-+
-+		skb->data_len += skb_temp->len;
-+		size_remaining -= skb_temp->len;
-+
-+		/* Increment SW index */
-+		sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
-+		(*cleaned_count)++;
-+	}
-+
-+	return sw_next_to_clean;
-+}
-+
-+/* edma_rx_complete_paged()
-+ *	Complete Rx processing for paged skbs
-+ */
-+static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
-+					u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	struct sk_buff *skb_temp;
-+	struct edma_sw_desc *sw_desc;
-+	int i;
-+	u16 size_remaining;
-+
-+	skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
-+
-+	/* Setup skbuff fields */
-+	skb->len = length;
-+
-+	if (likely(num_rfds <= 1)) {
-+		skb->data_len = length;
-+		skb->truesize += edma_cinfo->rx_page_buffer_len;
-+		skb_fill_page_desc(skb, 0, skb_frag_page(frag),
-+				16, length);
-+	} else {
-+		frag->size -= 16;
-+		skb->data_len = frag->size;
-+		skb->truesize += edma_cinfo->rx_page_buffer_len;
-+		size_remaining = length - frag->size;
-+
-+		skb_fill_page_desc(skb, 0, skb_frag_page(frag),
-+				16, frag->size);
-+
-+		/* clean-up all related sw_descs */
-+		for (i = 1; i < num_rfds; i++) {
-+			sw_desc = &erdr->sw_desc[sw_next_to_clean];
-+			skb_temp = sw_desc->skb;
-+			frag = &skb_shinfo(skb_temp)->frags[0];
-+			dma_unmap_page(&pdev->dev, sw_desc->dma,
-+				sw_desc->length, DMA_FROM_DEVICE);
-+
-+			if (size_remaining < edma_cinfo->rx_page_buffer_len)
-+				frag->size = size_remaining;
-+
-+			skb_fill_page_desc(skb, i, skb_frag_page(frag),
-+					0, frag->size);
-+
-+			skb_shinfo(skb_temp)->nr_frags = 0;
-+			dev_kfree_skb_any(skb_temp);
-+
-+			skb->data_len += frag->size;
-+			skb->truesize += edma_cinfo->rx_page_buffer_len;
-+			size_remaining -= frag->size;
-+
-+			/* Increment SW index */
-+			sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
-+			(*cleaned_count)++;
-+		}
-+	}
-+
-+	return sw_next_to_clean;
-+}
-+
-+/*
-+ * edma_rx_complete()
-+ *	Main api called from the poll function to process rx packets.
-+ */
-+static void edma_rx_complete(struct edma_common_info *edma_cinfo,
-+			    int *work_done, int work_to_do, int queue_id,
-+			    struct napi_struct *napi)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id];
-+	struct net_device *netdev;
-+	struct edma_adapter *adapter;
-+	struct edma_sw_desc *sw_desc;
-+	struct sk_buff *skb;
-+	struct edma_rx_return_desc *rd;
-+	u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1,
-+	    sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0;
-+	u32 data = 0;
-+	u8 *vaddr;
-+	int port_id, i, drop_count = 0;
-+	u32 priority;
-+	u16 count = erdr->count, rfd_avail;
-+	u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
-+
-+	sw_next_to_clean = erdr->sw_next_to_clean;
-+
-+	edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
-+	hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
-+			   EDMA_RFD_CONS_IDX_MASK;
-+
-+	do {
-+		while (sw_next_to_clean != hw_next_to_clean) {
-+			if (!work_to_do)
-+				break;
-+
-+			sw_desc = &erdr->sw_desc[sw_next_to_clean];
-+			skb = sw_desc->skb;
-+
-+			/* Unmap the allocated buffer */
-+			if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD))
-+				dma_unmap_single(&pdev->dev, sw_desc->dma,
-+					        sw_desc->length, DMA_FROM_DEVICE);
-+			else
-+				dma_unmap_page(&pdev->dev, sw_desc->dma,
-+					      sw_desc->length, DMA_FROM_DEVICE);
-+
-+			/* Get RRD */
-+			if (edma_cinfo->page_mode) {
-+				vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0]));
-+				memcpy((uint8_t *)&rrd[0], vaddr, 16);
-+				rd = (struct edma_rx_return_desc *)rrd;
-+				kunmap_atomic(vaddr);
-+			} else {
-+				rd = (struct edma_rx_return_desc *)skb->data;
-+			}
-+
-+			/* Check if RRD is valid */
-+			if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) {
-+				edma_clean_rfd(erdr, sw_next_to_clean);
-+				sw_next_to_clean = (sw_next_to_clean + 1) &
-+						   (erdr->count - 1);
-+				cleaned_count++;
-+				continue;
-+			}
-+
-+			/* Get the number of RFDs from RRD */
-+			num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK;
-+
-+			/* Get Rx port ID from switch */
-+			port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK;
-+			if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) {
-+				dev_err(&pdev->dev, "Invalid RRD source port bit set");
-+				for (i = 0; i < num_rfds; i++) {
-+					edma_clean_rfd(erdr, sw_next_to_clean);
-+					sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
-+					cleaned_count++;
-+				}
-+				continue;
-+			}
-+
-+			/* check if we have a sink for the data we receive.
-+			 * If the interface isn't setup, we have to drop the
-+			 * incoming data for now.
-+			 */
-+			netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id];
-+			if (!netdev) {
-+				edma_clean_rfd(erdr, sw_next_to_clean);
-+				sw_next_to_clean = (sw_next_to_clean + 1) &
-+						   (erdr->count - 1);
-+				cleaned_count++;
-+				continue;
-+			}
-+			adapter = netdev_priv(netdev);
-+
-+			/* This code is added to handle a usecase where high
-+			 * priority stream and a low priority stream are
-+			 * received simultaneously on DUT. The problem occurs
-+			 * if one of the  Rx rings is full and the corresponding
-+			 * core is busy with other stuff. This causes ESS CPU
-+			 * port to backpressure all incoming traffic including
-+			 * high priority one. We monitor free descriptor count
-+			 * on each CPU and whenever it reaches threshold (< 80),
-+			 * we drop all low priority traffic and let only high
-+			 * priotiy traffic pass through. We can hence avoid
-+			 * ESS CPU port to send backpressure on high priroity
-+			 * stream.
-+			 */
-+			priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
-+				& EDMA_RRD_PRIORITY_MASK;
-+			if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) {
-+				rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1);
-+				if (rfd_avail < EDMA_RFD_AVAIL_THR) {
-+					sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE;
-+					sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
-+					adapter->stats.rx_dropped++;
-+					cleaned_count++;
-+					drop_count++;
-+					if (drop_count == 3) {
-+						work_to_do--;
-+						(*work_done)++;
-+						drop_count = 0;
-+					}
-+					if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
-+						/* If buffer clean count reaches 16, we replenish HW buffers. */
-+						ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
-+						edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
-+							      sw_next_to_clean);
-+						cleaned_count = ret_count;
-+					}
-+					continue;
-+				}
-+			}
-+
-+			work_to_do--;
-+			(*work_done)++;
-+
-+			/* Increment SW index */
-+			sw_next_to_clean = (sw_next_to_clean + 1) &
-+					   (erdr->count - 1);
-+
-+			cleaned_count++;
-+
-+			/* Get the packet size and allocate buffer */
-+			length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK;
-+
-+			if (edma_cinfo->page_mode) {
-+				/* paged skb */
-+				sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
-+				if (!pskb_may_pull(skb, ETH_HLEN)) {
-+					dev_kfree_skb_any(skb);
-+					continue;
-+				}
-+			} else {
-+				/* single or fraglist skb */
-+
-+				/* Addition of 16 bytes is required, as in the packet
-+				 * first 16 bytes are rrd descriptors, so actual data
-+				 * starts from an offset of 16.
-+				 */
-+				skb_reserve(skb, 16);
-+				if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) {
-+					skb_put(skb, length);
-+				} else {
-+					sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
-+				}
-+			}
-+
-+			if (edma_stp_rstp) {
-+				edma_rx_complete_stp_rstp(skb, port_id, rd);
-+			}
-+
-+			skb->protocol = eth_type_trans(skb, netdev);
-+
-+			/* Record Rx queue for RFS/RPS and fill flow hash from HW */
-+			skb_record_rx_queue(skb, queue_to_rxid[queue_id]);
-+			if (netdev->features & NETIF_F_RXHASH) {
-+				hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT);
-+				if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END))
-+					skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4);
-+			}
-+
-+#ifdef CONFIG_NF_FLOW_COOKIE
-+			skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK;
-+#endif
-+			edma_receive_checksum(rd, skb);
-+
-+			/* Process VLAN HW acceleration indication provided by HW */
-+			if (unlikely(adapter->default_vlan_tag != rd->rrd4)) {
-+				vlan = rd->rrd4;
-+				if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
-+					__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
-+				else if (rd->rrd1 & EDMA_RRD_SVLAN)
-+					__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
-+			}
-+
-+			/* Update rx statistics */
-+			adapter->stats.rx_packets++;
-+			adapter->stats.rx_bytes += length;
-+
-+			/* Check if we reached refill threshold */
-+			if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
-+				ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
-+				edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
-+					      sw_next_to_clean);
-+				cleaned_count = ret_count;
-+			}
-+
-+			/* At this point skb should go to stack */
-+			napi_gro_receive(napi, skb);
-+		}
-+
-+		/* Check if we still have NAPI budget */
-+		if (!work_to_do)
-+			break;
-+
-+		/* Read index once again since we still have NAPI budget */
-+		edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
-+		hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
-+			EDMA_RFD_CONS_IDX_MASK;
-+	} while (hw_next_to_clean != sw_next_to_clean);
-+
-+	erdr->sw_next_to_clean = sw_next_to_clean;
-+
-+	/* Refill here in case refill threshold wasn't reached */
-+	if (likely(cleaned_count)) {
-+		ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
-+		if (ret_count)
-+			dev_dbg(&pdev->dev, "Not all buffers was reallocated");
-+		edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
-+			      erdr->sw_next_to_clean);
-+	}
-+}
-+
-+/* edma_delete_rfs_filter()
-+ *	Remove RFS filter from switch
-+ */
-+static int edma_delete_rfs_filter(struct edma_adapter *adapter,
-+				 struct edma_rfs_filter_node *filter_node)
-+{
-+	int res = -1;
-+
-+	struct flow_keys *keys = &filter_node->keys;
-+
-+	if (likely(adapter->set_rfs_rule))
-+		res = (*adapter->set_rfs_rule)(adapter->netdev,
-+			flow_get_u32_src(keys), flow_get_u32_dst(keys),
-+			keys->ports.src, keys->ports.dst,
-+			keys->basic.ip_proto, filter_node->rq_id, 0);
-+
-+	return res;
-+}
-+
-+/* edma_add_rfs_filter()
-+ *	Add RFS filter to switch
-+ */
-+static int edma_add_rfs_filter(struct edma_adapter *adapter,
-+			       struct flow_keys *keys, u16 rq,
-+			       struct edma_rfs_filter_node *filter_node)
-+{
-+	int res = -1;
-+
-+	struct flow_keys *dest_keys = &filter_node->keys;
-+
-+	memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys));
-+/*
-+	dest_keys->control = keys->control;
-+	dest_keys->basic = keys->basic;
-+	dest_keys->addrs = keys->addrs;
-+	dest_keys->ports = keys->ports;
-+	dest_keys.ip_proto = keys->ip_proto;
-+*/
-+	/* Call callback registered by ESS driver */
-+	if (likely(adapter->set_rfs_rule))
-+		res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys),
-+		      flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst,
-+		      keys->basic.ip_proto, rq, 1);
-+
-+	return res;
-+}
-+
-+/* edma_rfs_key_search()
-+ *	Look for existing RFS entry
-+ */
-+static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h,
-+						       struct flow_keys *key)
-+{
-+	struct edma_rfs_filter_node *p;
-+
-+	hlist_for_each_entry(p, h, node)
-+		if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) &&
-+		    flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) &&
-+		    p->keys.ports.src == key->ports.src &&
-+		    p->keys.ports.dst == key->ports.dst &&
-+		    p->keys.basic.ip_proto == key->basic.ip_proto)
-+			return p;
-+	return NULL;
-+}
-+
-+/* edma_initialise_rfs_flow_table()
-+ * 	Initialise EDMA RFS flow table
-+ */
-+static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter)
-+{
-+	int i;
-+
-+	spin_lock_init(&adapter->rfs.rfs_ftab_lock);
-+
-+	/* Initialize EDMA flow hash table */
-+	for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++)
-+		INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]);
-+
-+	adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES;
-+	adapter->rfs.filter_available = adapter->rfs.max_num_filter;
-+	adapter->rfs.hashtoclean = 0;
-+
-+	/* Add timer to get periodic RFS updates from OS */
-+	timer_setup(&adapter->rfs.expire_rfs, edma_flow_may_expire, 0);
-+	mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
-+}
-+
-+/* edma_free_rfs_flow_table()
-+ * 	Free EDMA RFS flow table
-+ */
-+static void edma_free_rfs_flow_table(struct edma_adapter *adapter)
-+{
-+	int i;
-+
-+	/* Remove sync timer */
-+	del_timer_sync(&adapter->rfs.expire_rfs);
-+	spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-+
-+	/* Free EDMA RFS table entries */
-+	adapter->rfs.filter_available = 0;
-+
-+	/* Clean-up EDMA flow hash table */
-+	for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) {
-+		struct hlist_head *hhead;
-+		struct hlist_node *tmp;
-+		struct edma_rfs_filter_node *filter_node;
-+		int res;
-+
-+		hhead = &adapter->rfs.hlist_head[i];
-+		hlist_for_each_entry_safe(filter_node, tmp, hhead, node) {
-+			res  = edma_delete_rfs_filter(adapter, filter_node);
-+			if (res < 0)
-+				dev_warn(&adapter->netdev->dev,
-+					"EDMA going down but RFS entry %d not allowed to be flushed by Switch",
-+				        filter_node->flow_id);
-+			hlist_del(&filter_node->node);
-+			kfree(filter_node);
-+		}
-+	}
-+	spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+}
-+
-+/* edma_tx_unmap_and_free()
-+ *	clean TX buffer
-+ */
-+static inline void edma_tx_unmap_and_free(struct platform_device *pdev,
-+					 struct edma_sw_desc *sw_desc)
-+{
-+	struct sk_buff *skb = sw_desc->skb;
-+
-+	if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) ||
-+			(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST)))
-+		/* unmap_single for skb head area */
-+		dma_unmap_single(&pdev->dev, sw_desc->dma,
-+				sw_desc->length, DMA_TO_DEVICE);
-+	else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)
-+		/* unmap page for paged fragments */
-+		dma_unmap_page(&pdev->dev, sw_desc->dma,
-+		  	      sw_desc->length, DMA_TO_DEVICE);
-+
-+	if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST))
-+		dev_kfree_skb_any(skb);
-+
-+	sw_desc->flags = 0;
-+}
-+
-+/* edma_tx_complete()
-+ *	Used to clean tx queues and update hardware and consumer index
-+ */
-+static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id)
-+{
-+	struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+	struct edma_sw_desc *sw_desc;
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	int i;
-+
-+	u16 sw_next_to_clean = etdr->sw_next_to_clean;
-+	u16 hw_next_to_clean;
-+	u32 data = 0;
-+
-+	edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data);
-+	hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK;
-+
-+	/* clean the buffer here */
-+	while (sw_next_to_clean != hw_next_to_clean) {
-+		sw_desc = &etdr->sw_desc[sw_next_to_clean];
-+		edma_tx_unmap_and_free(pdev, sw_desc);
-+		sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1);
-+	}
-+
-+	etdr->sw_next_to_clean = sw_next_to_clean;
-+
-+	/* update the TPD consumer index register */
-+	edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean);
-+
-+	/* Wake the queue if queue is stopped and netdev link is up */
-+	for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) {
-+		if (netif_tx_queue_stopped(etdr->nq[i])) {
-+			if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i]))
-+				netif_tx_wake_queue(etdr->nq[i]);
-+		}
-+	}
-+}
-+
-+/* edma_get_tx_buffer()
-+ *	Get sw_desc corresponding to the TPD
-+ */
-+static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo,
-+					       struct edma_tx_desc *tpd, int queue_id)
-+{
-+	struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+	return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc];
-+}
-+
-+/* edma_get_next_tpd()
-+ *	Return a TPD descriptor for transfer
-+ */
-+static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo,
-+					     int queue_id)
-+{
-+	struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+	u16 sw_next_to_fill = etdr->sw_next_to_fill;
-+	struct edma_tx_desc *tpd_desc =
-+		(&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]);
-+
-+	etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1);
-+
-+	return tpd_desc;
-+}
-+
-+/* edma_tpd_available()
-+ *	Check number of free TPDs
-+ */
-+static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo,
-+				    int queue_id)
-+{
-+	struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+
-+	u16 sw_next_to_fill;
-+	u16 sw_next_to_clean;
-+	u16 count = 0;
-+
-+	sw_next_to_clean = etdr->sw_next_to_clean;
-+	sw_next_to_fill = etdr->sw_next_to_fill;
-+
-+	if (likely(sw_next_to_clean <= sw_next_to_fill))
-+		count = etdr->count;
-+
-+	return count + sw_next_to_clean - sw_next_to_fill - 1;
-+}
-+
-+/* edma_tx_queue_get()
-+ *	Get the starting number of  the queue
-+ */
-+static inline int edma_tx_queue_get(struct edma_adapter *adapter,
-+				   struct sk_buff *skb, int txq_id)
-+{
-+	/* skb->priority is used as an index to skb priority table
-+	 * and based on packet priority, correspong queue is assigned.
-+	 */
-+	return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb);
-+}
-+
-+/* edma_tx_update_hw_idx()
-+ *	update the producer index for the ring transmitted
-+ */
-+static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo,
-+			         struct sk_buff *skb, int queue_id)
-+{
-+	struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+	u32 tpd_idx_data;
-+
-+	/* Read and update the producer index */
-+	edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data);
-+	tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS;
-+	tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK)
-+		<< EDMA_TPD_PROD_IDX_SHIFT;
-+
-+	edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data);
-+}
-+
-+/* edma_rollback_tx()
-+ *	Function to retrieve tx resources in case of error
-+ */
-+static void edma_rollback_tx(struct edma_adapter *adapter,
-+			    struct edma_tx_desc *start_tpd, int queue_id)
-+{
-+	struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id];
-+	struct edma_sw_desc *sw_desc;
-+	struct edma_tx_desc *tpd = NULL;
-+	u16 start_index, index;
-+
-+	start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc);
-+
-+	index = start_index;
-+	while (index != etdr->sw_next_to_fill) {
-+		tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]);
-+		sw_desc = &etdr->sw_desc[index];
-+		edma_tx_unmap_and_free(adapter->pdev, sw_desc);
-+		memset(tpd, 0, sizeof(struct edma_tx_desc));
-+		if (++index == etdr->count)
-+			index = 0;
-+	}
-+	etdr->sw_next_to_fill = start_index;
-+}
-+
-+/* edma_tx_map_and_fill()
-+ *	gets called from edma_xmit_frame
-+ *
-+ * This is where the dma of the buffer to be transmitted
-+ * gets mapped
-+ */
-+static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo,
-+			       struct edma_adapter *adapter, struct sk_buff *skb, int queue_id,
-+			       unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap,
-+			       bool packet_is_rstp, int nr_frags)
-+{
-+	struct edma_sw_desc *sw_desc = NULL;
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	struct edma_tx_desc *tpd = NULL, *start_tpd = NULL;
-+	struct sk_buff *iter_skb;
-+	int i = 0;
-+	u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0;
-+	u16 buf_len, lso_desc_len = 0;
-+
-+	/* It should either be a nr_frags skb or fraglist skb but not both */
-+	BUG_ON(nr_frags && skb_has_frag_list(skb));
-+
-+	if (skb_is_gso(skb)) {
-+		/* TODO: What additional checks need to be performed here */
-+		if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
-+			lso_word1 |= EDMA_TPD_IPV4_EN;
-+			ip_hdr(skb)->check = 0;
-+			tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr,
-+				ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
-+		} else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
-+			lso_word1 |= EDMA_TPD_LSO_V2_EN;
-+			ipv6_hdr(skb)->payload_len = 0;
-+			tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-+				&ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
-+		} else
-+			return -EINVAL;
-+
-+		lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) |
-+				(skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT);
-+	} else if (flags_transmit & EDMA_HW_CHECKSUM) {
-+			u8 css, cso;
-+			cso = skb_checksum_start_offset(skb);
-+			css = cso  + skb->csum_offset;
-+
-+			word1 |= (EDMA_TPD_CUSTOM_CSUM_EN);
-+			word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT;
-+			word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT);
-+	}
-+
-+	if (skb->protocol == htons(ETH_P_PPP_SES))
-+		word1 |= EDMA_TPD_PPPOE_EN;
-+
-+	if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) {
-+		switch(skb->vlan_proto) {
-+		case htons(ETH_P_8021Q):
-+			word3 |= (1 << EDMA_TX_INS_CVLAN);
-+			word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT;
-+			break;
-+		case htons(ETH_P_8021AD):
-+			word1 |= (1 << EDMA_TX_INS_SVLAN);
-+			svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT;
-+			break;
-+		default:
-+			dev_err(&pdev->dev, "no ctag or stag present\n");
-+			goto vlan_tag_error;
-+		}
-+	} else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) {
-+		word3 |= (1 << EDMA_TX_INS_CVLAN);
-+		word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT;
-+	}
-+
-+	if (packet_is_rstp) {
-+		word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
-+		word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT;
-+	} else {
-+		word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
-+	}
-+
-+	buf_len = skb_headlen(skb);
-+
-+	if (lso_word1) {
-+		if (lso_word1 & EDMA_TPD_LSO_V2_EN) {
-+
-+			/* IPv6 LSOv2 descriptor */
-+			start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+			sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+			sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE;
-+
-+			/* LSOv2 descriptor overrides addr field to pass length */
-+			tpd->addr = cpu_to_le16(skb->len);
-+			tpd->svlan_tag = svlan_tag;
-+			tpd->word1 = word1 | lso_word1;
-+			tpd->word3 = word3;
-+		}
-+
-+		tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+		if (!start_tpd)
-+			start_tpd = tpd;
-+		sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+
-+		/* The last buffer info contain the skb address,
-+		 * so skb will be freed after unmap
-+		 */
-+		sw_desc->length = lso_desc_len;
-+		sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-+
-+		sw_desc->dma = dma_map_single(&adapter->pdev->dev,
-+					skb->data, buf_len, DMA_TO_DEVICE);
-+		if (dma_mapping_error(&pdev->dev, sw_desc->dma))
-+			goto dma_error;
-+
-+		tpd->addr = cpu_to_le32(sw_desc->dma);
-+		tpd->len  = cpu_to_le16(buf_len);
-+
-+		tpd->svlan_tag = svlan_tag;
-+		tpd->word1 = word1 | lso_word1;
-+		tpd->word3 = word3;
-+
-+		/* The last buffer info contain the skb address,
-+		 * so it will be freed after unmap
-+		 */
-+		sw_desc->length = lso_desc_len;
-+		sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-+
-+		buf_len = 0;
-+	}
-+
-+	if (likely(buf_len)) {
-+
-+		/* TODO Do not dequeue descriptor if there is a potential error */
-+		tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+
-+		if (!start_tpd)
-+			start_tpd = tpd;
-+
-+		sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+
-+		/* The last buffer info contain the skb address,
-+		 * so it will be free after unmap
-+		 */
-+		sw_desc->length = buf_len;
-+		sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-+		sw_desc->dma = dma_map_single(&adapter->pdev->dev,
-+			skb->data, buf_len, DMA_TO_DEVICE);
-+		if (dma_mapping_error(&pdev->dev, sw_desc->dma))
-+			goto dma_error;
-+
-+		tpd->addr = cpu_to_le32(sw_desc->dma);
-+		tpd->len  = cpu_to_le16(buf_len);
-+
-+		tpd->svlan_tag = svlan_tag;
-+		tpd->word1 = word1 | lso_word1;
-+		tpd->word3 = word3;
-+	}
-+
-+	/* Walk through all paged fragments */
-+	while (nr_frags--) {
-+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-+		buf_len = skb_frag_size(frag);
-+		tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+		sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+		sw_desc->length = buf_len;
-+		sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG;
-+
-+		sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE);
-+
-+		if (dma_mapping_error(NULL, sw_desc->dma))
-+			goto dma_error;
-+
-+		tpd->addr = cpu_to_le32(sw_desc->dma);
-+		tpd->len  = cpu_to_le16(buf_len);
-+
-+		tpd->svlan_tag = svlan_tag;
-+		tpd->word1 = word1 | lso_word1;
-+		tpd->word3 = word3;
-+		i++;
-+	}
-+
-+	/* Walk through all fraglist skbs */
-+	skb_walk_frags(skb, iter_skb) {
-+		buf_len = iter_skb->len;
-+		tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+		sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+		sw_desc->length = buf_len;
-+		sw_desc->dma =  dma_map_single(&adapter->pdev->dev,
-+				iter_skb->data, buf_len, DMA_TO_DEVICE);
-+
-+		if (dma_mapping_error(NULL, sw_desc->dma))
-+			goto dma_error;
-+
-+		tpd->addr = cpu_to_le32(sw_desc->dma);
-+		tpd->len  = cpu_to_le16(buf_len);
-+		tpd->svlan_tag = svlan_tag;
-+		tpd->word1 = word1 | lso_word1;
-+		tpd->word3 = word3;
-+		sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST;
-+	}
-+
-+	if (tpd)
-+		tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT;
-+
-+	sw_desc->skb = skb;
-+	sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST;
-+
-+	return 0;
-+
-+dma_error:
-+	edma_rollback_tx(adapter, start_tpd, queue_id);
-+	dev_err(&pdev->dev, "TX DMA map failed\n");
-+vlan_tag_error:
-+	return -ENOMEM;
-+}
-+
-+/* edma_check_link()
-+ *	check Link status
-+ */
-+static int edma_check_link(struct edma_adapter *adapter)
-+{
-+	struct phy_device *phydev = adapter->phydev;
-+
-+	if (!(adapter->poll_required))
-+		return __EDMA_LINKUP;
-+
-+	if (phydev->link)
-+		return __EDMA_LINKUP;
-+
-+	return __EDMA_LINKDOWN;
-+}
-+
-+/* edma_adjust_link()
-+ *	check for edma link status
-+ */
-+void edma_adjust_link(struct net_device *netdev)
-+{
-+	int status;
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+	struct phy_device *phydev = adapter->phydev;
-+
-+	if (!test_bit(__EDMA_UP, &adapter->state_flags))
-+		return;
-+
-+	status = edma_check_link(adapter);
-+
-+	if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
-+		dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed);
-+		adapter->link_state = __EDMA_LINKUP;
-+		netif_carrier_on(netdev);
-+		if (netif_running(netdev))
-+			netif_tx_wake_all_queues(netdev);
-+	} else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) {
-+		dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name);
-+		adapter->link_state = __EDMA_LINKDOWN;
-+		netif_carrier_off(netdev);
-+		netif_tx_stop_all_queues(netdev);
-+	}
-+}
-+
-+/* edma_get_stats()
-+ *	Statistics api used to retreive the tx/rx statistics
-+ */
-+struct net_device_stats *edma_get_stats(struct net_device *netdev)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+	return &adapter->stats;
-+}
-+
-+/* edma_xmit()
-+ *	Main api to be called by the core for packet transmission
-+ */
-+netdev_tx_t edma_xmit(struct sk_buff *skb,
-+		     struct net_device *net_dev)
-+{
-+	struct edma_adapter *adapter = netdev_priv(net_dev);
-+	struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+	struct edma_tx_desc_ring *etdr;
-+	u16 from_cpu, dp_bitmap, txq_id;
-+	int ret, nr_frags = 0, num_tpds_needed = 1, queue_id;
-+	unsigned int flags_transmit = 0;
-+	bool packet_is_rstp = false;
-+	struct netdev_queue *nq = NULL;
-+
-+	if (skb_shinfo(skb)->nr_frags) {
-+		nr_frags = skb_shinfo(skb)->nr_frags;
-+		num_tpds_needed += nr_frags;
-+	} else if (skb_has_frag_list(skb)) {
-+		struct sk_buff *iter_skb;
-+
-+		skb_walk_frags(skb, iter_skb)
-+			num_tpds_needed++;
-+	}
-+
-+	if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) {
-+		dev_err(&net_dev->dev,
-+			"skb received with fragments %d which is more than %lu",
-+			num_tpds_needed, EDMA_MAX_SKB_FRAGS);
-+		dev_kfree_skb_any(skb);
-+		adapter->stats.tx_errors++;
-+		return NETDEV_TX_OK;
-+	}
-+
-+	if (edma_stp_rstp) {
-+		u16 ath_hdr, ath_eth_type;
-+		u8 mac_addr[EDMA_ETH_HDR_LEN];
-+		ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]);
-+		if (ath_eth_type == edma_ath_eth_type) {
-+			packet_is_rstp = true;
-+			ath_hdr = htons(*(uint16_t *)&skb->data[14]);
-+			dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK;
-+			from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT;
-+			memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN);
-+
-+			skb_pull(skb, 4);
-+
-+			memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
-+		}
-+	}
-+
-+	/* this will be one of the 4 TX queues exposed to linux kernel */
-+	txq_id = skb_get_queue_mapping(skb);
-+	queue_id = edma_tx_queue_get(adapter, skb, txq_id);
-+	etdr = edma_cinfo->tpd_ring[queue_id];
-+	nq = netdev_get_tx_queue(net_dev, txq_id);
-+
-+	local_bh_disable();
-+	/* Tx is not handled in bottom half context. Hence, we need to protect
-+	 * Tx from tasks and bottom half
-+	 */
-+
-+	if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) {
-+		/* not enough descriptor, just stop queue */
-+		netif_tx_stop_queue(nq);
-+		local_bh_enable();
-+		dev_dbg(&net_dev->dev, "Not enough descriptors available");
-+		edma_cinfo->edma_ethstats.tx_desc_error++;
-+		return NETDEV_TX_BUSY;
-+	}
-+
-+	/* Check and mark VLAN tag offload */
-+	if (skb_vlan_tag_present(skb))
-+		flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
-+	else if (adapter->default_vlan_tag)
-+		flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
-+
-+	/* Check and mark checksum offload */
-+	if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
-+		flags_transmit |= EDMA_HW_CHECKSUM;
-+
-+	/* Map and fill descriptor for Tx */
-+	ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id,
-+		flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags);
-+	if (ret) {
-+		dev_kfree_skb_any(skb);
-+		adapter->stats.tx_errors++;
-+		goto netdev_okay;
-+	}
-+
-+	/* Update SW producer index */
-+	edma_tx_update_hw_idx(edma_cinfo, skb, queue_id);
-+
-+	/* update tx statistics */
-+	adapter->stats.tx_packets++;
-+	adapter->stats.tx_bytes += skb->len;
-+
-+netdev_okay:
-+	local_bh_enable();
-+	return NETDEV_TX_OK;
-+}
-+
-+/*
-+ * edma_flow_may_expire()
-+ * 	Timer function called periodically to delete the node
-+ */
-+void edma_flow_may_expire(struct timer_list *t)
-+{
-+	struct edma_rfs_flow_table *table = from_timer(table, t, expire_rfs);
-+	struct edma_adapter *adapter =
-+		container_of(table, typeof(*adapter), rfs);
-+	int j;
-+
-+	spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-+	for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) {
-+		struct hlist_head *hhead;
-+		struct hlist_node *tmp;
-+		struct edma_rfs_filter_node *n;
-+		bool res;
-+
-+		hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++];
-+		hlist_for_each_entry_safe(n, tmp, hhead, node) {
-+			res = rps_may_expire_flow(adapter->netdev, n->rq_id,
-+					n->flow_id, n->filter_id);
-+			if (res) {
-+				int ret;
-+				ret = edma_delete_rfs_filter(adapter, n);
-+				if (ret < 0)
-+					dev_dbg(&adapter->netdev->dev,
-+							"RFS entry %d not allowed to be flushed by Switch",
-+							n->flow_id);
-+				else {
-+					hlist_del(&n->node);
-+					kfree(n);
-+					adapter->rfs.filter_available++;
-+				}
-+			}
-+		}
-+	}
-+
-+	adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1);
-+	spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+	mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
-+}
-+
-+/* edma_rx_flow_steer()
-+ *	Called by core to to steer the flow to CPU
-+ */
-+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
-+		       u16 rxq, u32 flow_id)
-+{
-+	struct flow_keys keys;
-+	struct edma_rfs_filter_node *filter_node;
-+	struct edma_adapter *adapter = netdev_priv(dev);
-+	u16 hash_tblid;
-+	int res;
-+
-+	if (skb->protocol == htons(ETH_P_IPV6)) {
-+		dev_err(&adapter->pdev->dev, "IPv6 not supported\n");
-+		res = -EINVAL;
-+		goto no_protocol_err;
-+	}
-+
-+	/* Dissect flow parameters
-+	 * We only support IPv4 + TCP/UDP
-+	 */
-+	res = skb_flow_dissect_flow_keys(skb, &keys, 0);
-+	if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) {
-+		res = -EPROTONOSUPPORT;
-+		goto no_protocol_err;
-+	}
-+
-+	/* Check if table entry exists */
-+	hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK;
-+
-+	spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-+	filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys);
-+
-+	if (filter_node) {
-+		if (rxq == filter_node->rq_id) {
-+			res = -EEXIST;
-+			goto out;
-+		} else {
-+			res = edma_delete_rfs_filter(adapter, filter_node);
-+			if (res < 0)
-+				dev_warn(&adapter->netdev->dev,
-+						"Cannot steer flow %d to different queue",
-+						filter_node->flow_id);
-+			else {
-+				adapter->rfs.filter_available++;
-+				res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
-+				if (res < 0) {
-+					dev_warn(&adapter->netdev->dev,
-+							"Cannot steer flow %d to different queue",
-+							filter_node->flow_id);
-+				} else {
-+					adapter->rfs.filter_available--;
-+					filter_node->rq_id = rxq;
-+					filter_node->filter_id = res;
-+				}
-+			}
-+		}
-+	} else {
-+		if (adapter->rfs.filter_available == 0) {
-+			res = -EBUSY;
-+			goto out;
-+		}
-+
-+		filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC);
-+		if (!filter_node) {
-+			res = -ENOMEM;
-+			goto out;
-+		}
-+
-+		res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
-+		if (res < 0) {
-+			kfree(filter_node);
-+			goto out;
-+		}
-+
-+		adapter->rfs.filter_available--;
-+		filter_node->rq_id = rxq;
-+		filter_node->filter_id = res;
-+		filter_node->flow_id = flow_id;
-+		filter_node->keys = keys;
-+		INIT_HLIST_NODE(&filter_node->node);
-+		hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]);
-+	}
-+
-+out:
-+	spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+no_protocol_err:
-+	return res;
-+}
-+
-+/* edma_register_rfs_filter()
-+ *	Add RFS filter callback
-+ */
-+int edma_register_rfs_filter(struct net_device *netdev,
-+			    set_rfs_filter_callback_t set_filter)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+	spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-+
-+	if (adapter->set_rfs_rule) {
-+		spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+		return -1;
-+	}
-+
-+	adapter->set_rfs_rule = set_filter;
-+	spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+
-+	return 0;
-+}
-+
-+/* edma_alloc_tx_rings()
-+ *	Allocate rx rings
-+ */
-+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	int i, err = 0;
-+
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+		err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
-+		if (err) {
-+			dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i);
-+			return err;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/* edma_free_tx_rings()
-+ *	Free tx rings
-+ */
-+void edma_free_tx_rings(struct edma_common_info *edma_cinfo)
-+{
-+	int i;
-+
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++)
-+		edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
-+}
-+
-+/* edma_free_tx_resources()
-+ *	Free buffers associated with tx rings
-+ */
-+void edma_free_tx_resources(struct edma_common_info *edma_cinfo)
-+{
-+	struct edma_tx_desc_ring *etdr;
-+	struct edma_sw_desc *sw_desc;
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	int i, j;
-+
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+		etdr = edma_cinfo->tpd_ring[i];
-+		for (j = 0; j < EDMA_TX_RING_SIZE; j++) {
-+			sw_desc = &etdr->sw_desc[j];
-+			if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD |
-+				EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST))
-+				edma_tx_unmap_and_free(pdev, sw_desc);
-+		}
-+	}
-+}
-+
-+/* edma_alloc_rx_rings()
-+ *	Allocate rx rings
-+ */
-+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo)
-+{
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	int i, j, err = 0;
-+
-+	for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+		err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
-+		if (err) {
-+			dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i);
-+			return err;
-+		}
-+		j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+	}
-+
-+	return 0;
-+}
-+
-+/* edma_free_rx_rings()
-+ *	free rx rings
-+ */
-+void edma_free_rx_rings(struct edma_common_info *edma_cinfo)
-+{
-+	int i, j;
-+
-+	for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+		edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
-+		j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+	}
-+}
-+
-+/* edma_free_queues()
-+ *	Free the queues allocaated
-+ */
-+void edma_free_queues(struct edma_common_info *edma_cinfo)
-+{
-+	int i , j;
-+
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+		if (edma_cinfo->tpd_ring[i])
-+			kfree(edma_cinfo->tpd_ring[i]);
-+		edma_cinfo->tpd_ring[i] = NULL;
-+	}
-+
-+	for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+		if (edma_cinfo->rfd_ring[j])
-+			kfree(edma_cinfo->rfd_ring[j]);
-+		edma_cinfo->rfd_ring[j] = NULL;
-+		j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+	}
-+
-+	edma_cinfo->num_rx_queues = 0;
-+	edma_cinfo->num_tx_queues = 0;
-+
-+	return;
-+}
-+
-+/* edma_free_rx_resources()
-+ *	Free buffers associated with tx rings
-+ */
-+void edma_free_rx_resources(struct edma_common_info *edma_cinfo)
-+{
-+        struct edma_rfd_desc_ring *erdr;
-+	struct edma_sw_desc *sw_desc;
-+	struct platform_device *pdev = edma_cinfo->pdev;
-+	int i, j, k;
-+
-+	for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) {
-+		erdr = edma_cinfo->rfd_ring[k];
-+		for (j = 0; j < EDMA_RX_RING_SIZE; j++) {
-+			sw_desc = &erdr->sw_desc[j];
-+			if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) {
-+				dma_unmap_single(&pdev->dev, sw_desc->dma,
-+					sw_desc->length, DMA_FROM_DEVICE);
-+				edma_clean_rfd(erdr, j);
-+			} else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) {
-+				dma_unmap_page(&pdev->dev, sw_desc->dma,
-+					sw_desc->length, DMA_FROM_DEVICE);
-+				edma_clean_rfd(erdr, j);
-+			}
-+		}
-+		k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+
-+	}
-+}
-+
-+/* edma_alloc_queues_tx()
-+ *	Allocate memory for all rings
-+ */
-+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo)
-+{
-+	int i;
-+
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+		struct edma_tx_desc_ring *etdr;
-+		etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL);
-+		if (!etdr)
-+			goto err;
-+		etdr->count = edma_cinfo->tx_ring_count;
-+		edma_cinfo->tpd_ring[i] = etdr;
-+	}
-+
-+	return 0;
-+err:
-+	edma_free_queues(edma_cinfo);
-+	return -1;
-+}
-+
-+/* edma_alloc_queues_rx()
-+ *	Allocate memory for all rings
-+ */
-+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo)
-+{
-+	int i, j;
-+
-+	for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+		struct edma_rfd_desc_ring *rfd_ring;
-+		rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring),
-+				GFP_KERNEL);
-+		if (!rfd_ring)
-+			goto err;
-+		rfd_ring->count = edma_cinfo->rx_ring_count;
-+		edma_cinfo->rfd_ring[j] = rfd_ring;
-+		j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+	}
-+	return 0;
-+err:
-+	edma_free_queues(edma_cinfo);
-+	return -1;
-+}
-+
-+/* edma_clear_irq_status()
-+ *	Clear interrupt status
-+ */
-+void edma_clear_irq_status()
-+{
-+	edma_write_reg(EDMA_REG_RX_ISR, 0xff);
-+	edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
-+	edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff);
-+	edma_write_reg(EDMA_REG_WOL_ISR, 0x1);
-+};
-+
-+/* edma_configure()
-+ *	Configure skb, edma interrupts and control register.
-+ */
-+int edma_configure(struct edma_common_info *edma_cinfo)
-+{
-+	struct edma_hw *hw = &edma_cinfo->hw;
-+	u32 intr_modrt_data;
-+	u32 intr_ctrl_data = 0;
-+	int i, j, ret_count;
-+
-+	edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data);
-+	intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT);
-+	intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT;
-+	edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data);
-+
-+	edma_clear_irq_status();
-+
-+	/* Clear any WOL status */
-+	edma_write_reg(EDMA_REG_WOL_CTRL, 0);
-+	intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT);
-+	intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT);
-+	edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
-+	edma_configure_tx(edma_cinfo);
-+	edma_configure_rx(edma_cinfo);
-+
-+	/* Allocate the RX buffer */
-+	for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+		struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j];
-+		ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j);
-+		if (ret_count) {
-+			dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n");
-+		}
-+		j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+	}
-+
-+	/* Configure descriptor Ring */
-+	edma_init_desc(edma_cinfo);
-+	return 0;
-+}
-+
-+/* edma_irq_enable()
-+ *	Enable default interrupt generation settings
-+ */
-+void edma_irq_enable(struct edma_common_info *edma_cinfo)
-+{
-+	struct edma_hw *hw = &edma_cinfo->hw;
-+	int i, j;
-+
-+	edma_write_reg(EDMA_REG_RX_ISR, 0xff);
-+	for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+		edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask);
-+		j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+	}
-+	edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++)
-+		edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask);
-+}
-+
-+/* edma_irq_disable()
-+ *	Disable Interrupt
-+ */
-+void edma_irq_disable(struct edma_common_info *edma_cinfo)
-+{
-+	int i;
-+
-+	for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++)
-+		edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0);
-+
-+	for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++)
-+		edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0);
-+	edma_write_reg(EDMA_REG_MISC_IMR, 0);
-+	edma_write_reg(EDMA_REG_WOL_IMR, 0);
-+}
-+
-+/* edma_free_irqs()
-+ *	Free All IRQs
-+ */
-+void edma_free_irqs(struct edma_adapter *adapter)
-+{
-+	struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+	int i, j;
-+	int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2);
-+
-+	for (i = 0; i < CONFIG_NR_CPUS; i++) {
-+		for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++)
-+			free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]);
-+
-+		for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++)
-+			free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]);
-+	}
-+}
-+
-+/* edma_enable_rx_ctrl()
-+ *	Enable RX queue control
-+ */
-+void edma_enable_rx_ctrl(struct edma_hw *hw)
-+{
-+	u32 data;
-+
-+	edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
-+	data |= EDMA_RXQ_CTRL_EN;
-+	edma_write_reg(EDMA_REG_RXQ_CTRL, data);
-+}
-+
-+
-+/* edma_enable_tx_ctrl()
-+ *	Enable TX queue control
-+ */
-+void edma_enable_tx_ctrl(struct edma_hw *hw)
-+{
-+	u32 data;
-+
-+	edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
-+	data |= EDMA_TXQ_CTRL_TXQ_EN;
-+	edma_write_reg(EDMA_REG_TXQ_CTRL, data);
-+}
-+
-+/* edma_stop_rx_tx()
-+ *	Disable RX/TQ Queue control
-+ */
-+void edma_stop_rx_tx(struct edma_hw *hw)
-+{
-+	u32 data;
-+
-+	edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
-+	data &= ~EDMA_RXQ_CTRL_EN;
-+	edma_write_reg(EDMA_REG_RXQ_CTRL, data);
-+	edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
-+	data &= ~EDMA_TXQ_CTRL_TXQ_EN;
-+	edma_write_reg(EDMA_REG_TXQ_CTRL, data);
-+}
-+
-+/* edma_reset()
-+ *	Reset the EDMA
-+ */
-+int edma_reset(struct edma_common_info *edma_cinfo)
-+{
-+	struct edma_hw *hw = &edma_cinfo->hw;
-+
-+	edma_irq_disable(edma_cinfo);
-+
-+	edma_clear_irq_status();
-+
-+	edma_stop_rx_tx(hw);
-+
-+	return 0;
-+}
-+
-+/* edma_fill_netdev()
-+ * 	Fill netdev for each etdr
-+ */
-+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id,
-+		    int dev, int txq_id)
-+{
-+	struct edma_tx_desc_ring *etdr;
-+	int i = 0;
-+
-+	etdr = edma_cinfo->tpd_ring[queue_id];
-+
-+	while (etdr->netdev[i])
-+		i++;
-+
-+	if (i >= EDMA_MAX_NETDEV_PER_QUEUE)
-+		return -1;
-+
-+	/* Populate the netdev associated with the tpd ring */
-+	etdr->netdev[i] = edma_netdev[dev];
-+	etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id);
-+
-+	return 0;
-+}
-+
-+/* edma_set_mac()
-+ *	Change the Ethernet Address of the NIC
-+ */
-+int edma_set_mac_addr(struct net_device *netdev, void *p)
-+{
-+	struct sockaddr *addr = p;
-+
-+	if (!is_valid_ether_addr(addr->sa_data))
-+		return -EINVAL;
-+
-+	if (netif_running(netdev))
-+		return -EBUSY;
-+
-+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-+	return 0;
-+}
-+
-+/* edma_set_stp_rstp()
-+ *	set stp/rstp
-+ */
-+void edma_set_stp_rstp(bool rstp)
-+{
-+	edma_stp_rstp = rstp;
-+}
-+
-+/* edma_assign_ath_hdr_type()
-+ *	assign atheros header eth type
-+ */
-+void edma_assign_ath_hdr_type(int eth_type)
-+{
-+	edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK;
-+}
-+
-+/* edma_get_default_vlan_tag()
-+ *	Used by other modules to get the default vlan tag
-+ */
-+int edma_get_default_vlan_tag(struct net_device *netdev)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+	if (adapter->default_vlan_tag)
-+		return adapter->default_vlan_tag;
-+
-+	return 0;
-+}
-+
-+/* edma_open()
-+ *	gets called when netdevice is up, start the queue.
-+ */
-+int edma_open(struct net_device *netdev)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+	struct platform_device *pdev = adapter->edma_cinfo->pdev;
-+
-+	netif_tx_start_all_queues(netdev);
-+	edma_initialise_rfs_flow_table(adapter);
-+	set_bit(__EDMA_UP, &adapter->state_flags);
-+
-+	/* if Link polling is enabled, in our case enabled for WAN, then
-+	 * do a phy start, else always set link as UP
-+	 */
-+	if (adapter->poll_required) {
-+		if (!IS_ERR(adapter->phydev)) {
-+			phy_start(adapter->phydev);
-+			phy_start_aneg(adapter->phydev);
-+			adapter->link_state = __EDMA_LINKDOWN;
-+		} else {
-+			dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n");
-+		}
-+	} else {
-+		adapter->link_state = __EDMA_LINKUP;
-+		netif_carrier_on(netdev);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+/* edma_close()
-+ *	gets called when netdevice is down, stops the queue.
-+ */
-+int edma_close(struct net_device *netdev)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+	edma_free_rfs_flow_table(adapter);
-+	netif_carrier_off(netdev);
-+	netif_tx_stop_all_queues(netdev);
-+
-+	if (adapter->poll_required) {
-+		if (!IS_ERR(adapter->phydev))
-+			phy_stop(adapter->phydev);
-+	}
-+
-+	adapter->link_state = __EDMA_LINKDOWN;
-+
-+	/* Set GMAC state to UP before link state is checked
-+	 */
-+	clear_bit(__EDMA_UP, &adapter->state_flags);
-+
-+	return 0;
-+}
-+
-+/* edma_poll
-+ *	polling function that gets called when the napi gets scheduled.
-+ *
-+ * Main sequence of task performed in this api
-+ * is clear irq status -> clear_tx_irq -> clean_rx_irq->
-+ * enable interrupts.
-+ */
-+int edma_poll(struct napi_struct *napi, int budget)
-+{
-+	struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi,
-+		struct edma_per_cpu_queues_info, napi);
-+	struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
-+	u32 reg_data;
-+	u32 shadow_rx_status, shadow_tx_status;
-+	int queue_id;
-+	int i, work_done = 0;
-+
-+	/* Store the Rx/Tx status by ANDing it with
-+	 * appropriate CPU RX?TX mask
-+	 */
-+	edma_read_reg(EDMA_REG_RX_ISR, &reg_data);
-+	edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
-+	shadow_rx_status = edma_percpu_info->rx_status;
-+	edma_read_reg(EDMA_REG_TX_ISR, &reg_data);
-+	edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask;
-+	shadow_tx_status = edma_percpu_info->tx_status;
-+
-+	/* Every core will have a start, which will be computed
-+	 * in probe and stored in edma_percpu_info->tx_start variable.
-+	 * We will shift the status bit by tx_start to obtain
-+	 * status bits for the core on which the current processing
-+	 * is happening. Since, there are 4 tx queues per core,
-+	 * we will run the loop till we get the correct queue to clear.
-+	 */
-+	while (edma_percpu_info->tx_status) {
-+		queue_id = ffs(edma_percpu_info->tx_status) - 1;
-+		edma_tx_complete(edma_cinfo, queue_id);
-+		edma_percpu_info->tx_status &= ~(1 << queue_id);
-+	}
-+
-+	/* Every core will have a start, which will be computed
-+	 * in probe and stored in edma_percpu_info->tx_start variable.
-+	 * We will shift the status bit by tx_start to obtain
-+	 * status bits for the core on which the current processing
-+	 * is happening. Since, there are 4 tx queues per core, we
-+	 * will run the loop till we get the correct queue to clear.
-+	 */
-+	while (edma_percpu_info->rx_status) {
-+		queue_id = ffs(edma_percpu_info->rx_status) - 1;
-+		edma_rx_complete(edma_cinfo, &work_done,
-+			        budget, queue_id, napi);
-+
-+		if (likely(work_done < budget))
-+			edma_percpu_info->rx_status &= ~(1 << queue_id);
-+		else
-+			break;
-+	}
-+
-+	/* Clear the status register, to avoid the interrupts to
-+	 * reoccur.This clearing of interrupt status register is
-+	 * done here as writing to status register only takes place
-+	 * once the  producer/consumer index has been updated to
-+	 * reflect that the packet transmission/reception went fine.
-+	 */
-+	edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
-+	edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
-+
-+	/* If budget not fully consumed, exit the polling mode */
-+	if (likely(work_done < budget)) {
-+		napi_complete(napi);
-+
-+		/* re-enable the interrupts */
-+		for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
-+			edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1);
-+		for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
-+			edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1);
-+	}
-+
-+	return work_done;
-+}
-+
-+/* edma interrupt()
-+ *	interrupt handler
-+ */
-+irqreturn_t edma_interrupt(int irq, void *dev)
-+{
-+	struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev;
-+	struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
-+	int i;
-+
-+	/* Unmask the TX/RX interrupt register */
-+	for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
-+		edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0);
-+
-+	for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
-+		edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0);
-+
-+	napi_schedule(&edma_percpu_info->napi);
-+
-+	return IRQ_HANDLED;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
-@@ -0,0 +1,447 @@
-+/*
-+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#ifndef _EDMA_H_
-+#define _EDMA_H_
-+
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/module.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/pagemap.h>
-+#include <linux/smp.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/kernel.h>
-+#include <linux/device.h>
-+#include <linux/sysctl.h>
-+#include <linux/phy.h>
-+#include <linux/of_net.h>
-+#include <net/checksum.h>
-+#include <net/ip6_checksum.h>
-+#include <asm-generic/bug.h>
-+#include "ess_edma.h"
-+
-+#define EDMA_CPU_CORES_SUPPORTED 4
-+#define EDMA_MAX_PORTID_SUPPORTED 5
-+#define EDMA_MAX_VLAN_SUPPORTED  EDMA_MAX_PORTID_SUPPORTED
-+#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1)
-+#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f	/* 0001_1111 = 0x1f */
-+#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */
-+
-+#define EDMA_MAX_RECEIVE_QUEUE 8
-+#define EDMA_MAX_TRANSMIT_QUEUE 16
-+
-+/* WAN/LAN adapter number */
-+#define EDMA_WAN 0
-+#define EDMA_LAN 1
-+
-+/* VLAN tag */
-+#define EDMA_LAN_DEFAULT_VLAN 1
-+#define EDMA_WAN_DEFAULT_VLAN 2
-+
-+#define EDMA_DEFAULT_GROUP1_VLAN 1
-+#define EDMA_DEFAULT_GROUP2_VLAN 2
-+#define EDMA_DEFAULT_GROUP3_VLAN 3
-+#define EDMA_DEFAULT_GROUP4_VLAN 4
-+#define EDMA_DEFAULT_GROUP5_VLAN 5
-+
-+/* Queues exposed to linux kernel */
-+#define EDMA_NETDEV_TX_QUEUE 4
-+#define EDMA_NETDEV_RX_QUEUE 4
-+
-+/* Number of queues per core */
-+#define EDMA_NUM_TXQ_PER_CORE 4
-+#define EDMA_NUM_RXQ_PER_CORE 2
-+
-+#define EDMA_TPD_EOP_SHIFT 31
-+
-+#define EDMA_PORT_ID_SHIFT 12
-+#define EDMA_PORT_ID_MASK 0x7
-+
-+/* tpd word 3 bit 18-28 */
-+#define EDMA_TPD_PORT_BITMAP_SHIFT 18
-+
-+#define EDMA_TPD_FROM_CPU_SHIFT 25
-+
-+#define EDMA_FROM_CPU_MASK 0x80
-+#define EDMA_SKB_PRIORITY_MASK 0x38
-+
-+/* TX/RX descriptor ring count */
-+/* should be a power of 2 */
-+#define EDMA_RX_RING_SIZE 128
-+#define EDMA_TX_RING_SIZE 128
-+
-+/* Flags used in paged/non paged mode */
-+#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256
-+#define EDMA_RX_HEAD_BUFF_SIZE 1540
-+
-+/* MAX frame size supported by switch */
-+#define EDMA_MAX_JUMBO_FRAME_SIZE 9216
-+
-+/* Configurations */
-+#define EDMA_INTR_CLEAR_TYPE 0
-+#define EDMA_INTR_SW_IDX_W_TYPE 0
-+#define EDMA_FIFO_THRESH_TYPE 0
-+#define EDMA_RSS_TYPE 0
-+#define EDMA_RX_IMT 0x0020
-+#define EDMA_TX_IMT 0x0050
-+#define EDMA_TPD_BURST 5
-+#define EDMA_TXF_BURST 0x100
-+#define EDMA_RFD_BURST 8
-+#define EDMA_RFD_THR 16
-+#define EDMA_RFD_LTHR 0
-+
-+/* RX/TX per CPU based mask/shift */
-+#define EDMA_TX_PER_CPU_MASK 0xF
-+#define EDMA_RX_PER_CPU_MASK 0x3
-+#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2
-+#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1
-+#define EDMA_TX_CPU_START_SHIFT 0x2
-+#define EDMA_RX_CPU_START_SHIFT 0x1
-+
-+/* FLags used in transmit direction */
-+#define EDMA_HW_CHECKSUM 0x00000001
-+#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002
-+#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004
-+
-+#define EDMA_SW_DESC_FLAG_LAST 0x1
-+#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2
-+#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4
-+#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8
-+#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10
-+#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20
-+
-+
-+#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1)
-+
-+/* Ethtool specific list of EDMA supported features */
-+#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \
-+					| SUPPORTED_10baseT_Full \
-+					| SUPPORTED_100baseT_Half \
-+					| SUPPORTED_100baseT_Full \
-+					| SUPPORTED_1000baseT_Full)
-+
-+/* Recevie side atheros Header */
-+#define EDMA_RX_ATH_HDR_VERSION 0x2
-+#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14
-+#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11
-+#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6
-+#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4
-+
-+/* Transmit side atheros Header */
-+#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F
-+#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80
-+#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7
-+
-+#define EDMA_TXQ_START_CORE0 8
-+#define EDMA_TXQ_START_CORE1 12
-+#define EDMA_TXQ_START_CORE2 0
-+#define EDMA_TXQ_START_CORE3 4
-+
-+#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00
-+#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000
-+#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F
-+#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0
-+
-+#define EDMA_ETH_HDR_LEN 12
-+#define EDMA_ETH_TYPE_MASK 0xFFFF
-+
-+#define EDMA_RX_BUFFER_WRITE 16
-+#define EDMA_RFD_AVAIL_THR 80
-+
-+#define EDMA_GMAC_NO_MDIO_PHY	PHY_MAX_ADDR
-+
-+extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst,
-+				  __be16 sport, __be16 dport,
-+				  uint8_t proto, u16 loadbalance, bool action);
-+struct edma_ethtool_statistics {
-+	u32 tx_q0_pkt;
-+	u32 tx_q1_pkt;
-+	u32 tx_q2_pkt;
-+	u32 tx_q3_pkt;
-+	u32 tx_q4_pkt;
-+	u32 tx_q5_pkt;
-+	u32 tx_q6_pkt;
-+	u32 tx_q7_pkt;
-+	u32 tx_q8_pkt;
-+	u32 tx_q9_pkt;
-+	u32 tx_q10_pkt;
-+	u32 tx_q11_pkt;
-+	u32 tx_q12_pkt;
-+	u32 tx_q13_pkt;
-+	u32 tx_q14_pkt;
-+	u32 tx_q15_pkt;
-+	u32 tx_q0_byte;
-+	u32 tx_q1_byte;
-+	u32 tx_q2_byte;
-+	u32 tx_q3_byte;
-+	u32 tx_q4_byte;
-+	u32 tx_q5_byte;
-+	u32 tx_q6_byte;
-+	u32 tx_q7_byte;
-+	u32 tx_q8_byte;
-+	u32 tx_q9_byte;
-+	u32 tx_q10_byte;
-+	u32 tx_q11_byte;
-+	u32 tx_q12_byte;
-+	u32 tx_q13_byte;
-+	u32 tx_q14_byte;
-+	u32 tx_q15_byte;
-+	u32 rx_q0_pkt;
-+	u32 rx_q1_pkt;
-+	u32 rx_q2_pkt;
-+	u32 rx_q3_pkt;
-+	u32 rx_q4_pkt;
-+	u32 rx_q5_pkt;
-+	u32 rx_q6_pkt;
-+	u32 rx_q7_pkt;
-+	u32 rx_q0_byte;
-+	u32 rx_q1_byte;
-+	u32 rx_q2_byte;
-+	u32 rx_q3_byte;
-+	u32 rx_q4_byte;
-+	u32 rx_q5_byte;
-+	u32 rx_q6_byte;
-+	u32 rx_q7_byte;
-+	u32 tx_desc_error;
-+};
-+
-+struct edma_mdio_data {
-+	struct mii_bus	*mii_bus;
-+	void __iomem	*membase;
-+	int phy_irq[PHY_MAX_ADDR];
-+};
-+
-+/* EDMA LINK state */
-+enum edma_link_state {
-+	__EDMA_LINKUP, /* Indicate link is UP */
-+	__EDMA_LINKDOWN /* Indicate link is down */
-+};
-+
-+/* EDMA GMAC state */
-+enum edma_gmac_state {
-+	__EDMA_UP /* use to indicate GMAC is up */
-+};
-+
-+/* edma transmit descriptor */
-+struct edma_tx_desc {
-+	__le16  len; /* full packet including CRC */
-+	__le16  svlan_tag; /* vlan tag */
-+	__le32  word1; /* byte 4-7 */
-+	__le32  addr; /* address of buffer */
-+	__le32  word3; /* byte 12 */
-+};
-+
-+/* edma receive return descriptor */
-+struct edma_rx_return_desc {
-+	u16 rrd0;
-+	u16 rrd1;
-+	u16 rrd2;
-+	u16 rrd3;
-+	u16 rrd4;
-+	u16 rrd5;
-+	u16 rrd6;
-+	u16 rrd7;
-+};
-+
-+/* RFD descriptor */
-+struct edma_rx_free_desc {
-+	__le32  buffer_addr; /* buffer address */
-+};
-+
-+/* edma hw specific data */
-+struct edma_hw {
-+	u32  __iomem *hw_addr; /* inner register address */
-+	struct edma_adapter *adapter; /* netdevice adapter */
-+	u32 rx_intr_mask; /*rx interrupt mask */
-+	u32 tx_intr_mask; /* tx interrupt nask */
-+	u32 misc_intr_mask; /* misc interrupt mask */
-+	u32 wol_intr_mask; /* wake on lan interrupt mask */
-+	bool intr_clear_type; /* interrupt clear */
-+	bool intr_sw_idx_w; /* interrupt software index */
-+	u32 rx_head_buff_size; /* Rx buffer size */
-+	u8 rss_type; /* rss protocol type */
-+};
-+
-+/* edma_sw_desc stores software descriptor
-+ * SW descriptor has 1:1 map with HW descriptor
-+ */
-+struct edma_sw_desc {
-+	struct sk_buff *skb;
-+	dma_addr_t dma; /* dma address */
-+	u16 length; /* Tx/Rx buffer length */
-+	u32 flags;
-+};
-+
-+/* per core related information */
-+struct edma_per_cpu_queues_info {
-+	struct napi_struct napi; /* napi associated with the core */
-+	u32 tx_mask; /* tx interrupt mask */
-+	u32 rx_mask; /* rx interrupt mask */
-+	u32 tx_status; /* tx interrupt status */
-+	u32 rx_status; /* rx interrupt status */
-+	u32 tx_start; /* tx queue start */
-+	u32 rx_start; /* rx queue start */
-+	struct edma_common_info *edma_cinfo; /* edma common info */
-+};
-+
-+/* edma specific common info */
-+struct edma_common_info {
-+	struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */
-+	struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */
-+	struct platform_device *pdev; /* device structure */
-+	struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED];
-+	struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX];
-+	struct ctl_table_header *edma_ctl_table_hdr;
-+	int num_gmac;
-+	struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */
-+	int num_rx_queues; /* number of rx queue */
-+	u32 num_tx_queues; /* number of tx queue */
-+	u32 tx_irq[16]; /* number of tx irq */
-+	u32 rx_irq[8]; /* number of rx irq */
-+	u32 from_cpu; /* from CPU TPD field */
-+	u32 num_rxq_per_core; /* Rx queues per core */
-+	u32 num_txq_per_core; /* Tx queues per core */
-+	u16 tx_ring_count; /* Tx ring count */
-+	u16 rx_ring_count; /* Rx ring*/
-+	u16 rx_head_buffer_len; /* rx buffer length */
-+	u16 rx_page_buffer_len; /* rx buffer length */
-+	u32 page_mode; /* Jumbo frame supported flag */
-+	u32 fraglist_mode; /* fraglist supported flag */
-+	struct edma_hw hw; /* edma hw specific structure */
-+	struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
-+	spinlock_t stats_lock; /* protect edma stats area for updation */
-+	struct timer_list edma_stats_timer;
-+};
-+
-+/* transimit packet descriptor (tpd) ring */
-+struct edma_tx_desc_ring {
-+	struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */
-+	struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE];
-+			/* Array of netdevs associated with the tpd ring */
-+	void *hw_desc; /* descriptor ring virtual address */
-+	struct edma_sw_desc *sw_desc; /* buffer associated with ring */
-+	int netdev_bmp; /* Bitmap for per-ring netdevs */
-+	u32 size; /* descriptor ring length in bytes */
-+	u16 count; /* number of descriptors in the ring */
-+	dma_addr_t dma; /* descriptor ring physical address */
-+	u16 sw_next_to_fill; /* next Tx descriptor to fill */
-+	u16 sw_next_to_clean; /* next Tx descriptor to clean */
-+};
-+
-+/* receive free descriptor (rfd) ring */
-+struct edma_rfd_desc_ring {
-+	void *hw_desc; /* descriptor ring virtual address */
-+	struct edma_sw_desc *sw_desc; /* buffer associated with ring */
-+	u16 size; /* bytes allocated to sw_desc */
-+	u16 count; /* number of descriptors in the ring */
-+	dma_addr_t dma; /* descriptor ring physical address */
-+	u16 sw_next_to_fill; /* next descriptor to fill */
-+	u16 sw_next_to_clean; /* next descriptor to clean */
-+};
-+
-+/* edma_rfs_flter_node - rfs filter node in hash table */
-+struct edma_rfs_filter_node {
-+	struct flow_keys keys;
-+	u32 flow_id; /* flow_id of filter provided by kernel */
-+	u16 filter_id; /* filter id of filter returned by adaptor */
-+	u16 rq_id; /* desired rq index */
-+	struct hlist_node node; /* edma rfs list node */
-+};
-+
-+/* edma_rfs_flow_tbl - rfs flow table */
-+struct edma_rfs_flow_table {
-+	u16 max_num_filter; /* Maximum number of filters edma supports */
-+	u16 hashtoclean; /* hash table index to clean next */
-+	int filter_available; /* Number of free filters available */
-+	struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES];
-+	spinlock_t rfs_ftab_lock;
-+	struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */
-+};
-+
-+/* EDMA net device structure */
-+struct edma_adapter {
-+	struct net_device *netdev; /* netdevice */
-+	struct platform_device *pdev; /* platform device */
-+	struct edma_common_info *edma_cinfo; /* edma common info */
-+	struct phy_device *phydev; /* Phy device */
-+	struct edma_rfs_flow_table rfs; /* edma rfs flow table */
-+	struct net_device_stats stats; /* netdev statistics */
-+	set_rfs_filter_callback_t set_rfs_rule;
-+	u32 flags;/* status flags */
-+	unsigned long state_flags; /* GMAC up/down flags */
-+	u32 forced_speed; /* link force speed */
-+	u32 forced_duplex; /* link force duplex */
-+	u32 link_state; /* phy link state */
-+	u32 phy_mdio_addr; /* PHY device address on MII interface */
-+	u32 poll_required; /* check if link polling is required */
-+	u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */
-+	u32 default_vlan_tag; /* vlan tag */
-+	u32 dp_bitmap;
-+	uint8_t phy_id[MII_BUS_ID_SIZE + 3];
-+};
-+
-+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo);
-+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo);
-+int edma_open(struct net_device *netdev);
-+int edma_close(struct net_device *netdev);
-+void edma_free_tx_resources(struct edma_common_info *edma_c_info);
-+void edma_free_rx_resources(struct edma_common_info *edma_c_info);
-+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo);
-+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo);
-+void edma_free_tx_rings(struct edma_common_info *edma_cinfo);
-+void edma_free_rx_rings(struct edma_common_info *edma_cinfo);
-+void edma_free_queues(struct edma_common_info *edma_cinfo);
-+void edma_irq_disable(struct edma_common_info *edma_cinfo);
-+int edma_reset(struct edma_common_info *edma_cinfo);
-+int edma_poll(struct napi_struct *napi, int budget);
-+netdev_tx_t edma_xmit(struct sk_buff *skb,
-+		struct net_device *netdev);
-+int edma_configure(struct edma_common_info *edma_cinfo);
-+void edma_irq_enable(struct edma_common_info *edma_cinfo);
-+void edma_enable_tx_ctrl(struct edma_hw *hw);
-+void edma_enable_rx_ctrl(struct edma_hw *hw);
-+void edma_stop_rx_tx(struct edma_hw *hw);
-+void edma_free_irqs(struct edma_adapter *adapter);
-+irqreturn_t edma_interrupt(int irq, void *dev);
-+void edma_write_reg(u16 reg_addr, u32 reg_value);
-+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value);
-+struct net_device_stats *edma_get_stats(struct net_device *netdev);
-+int edma_set_mac_addr(struct net_device *netdev, void *p);
-+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
-+		u16 rxq, u32 flow_id);
-+int edma_register_rfs_filter(struct net_device *netdev,
-+		set_rfs_filter_callback_t set_filter);
-+void edma_flow_may_expire(struct timer_list *t);
-+void edma_set_ethtool_ops(struct net_device *netdev);
-+void edma_set_stp_rstp(bool tag);
-+void edma_assign_ath_hdr_type(int tag);
-+int edma_get_default_vlan_tag(struct net_device *netdev);
-+void edma_adjust_link(struct net_device *netdev);
-+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id);
-+void edma_read_append_stats(struct edma_common_info *edma_cinfo);
-+void edma_change_tx_coalesce(int usecs);
-+void edma_change_rx_coalesce(int usecs);
-+void edma_get_tx_rx_coalesce(u32 *reg_val);
-+void edma_clear_irq_status(void);
-+#endif /* _EDMA_H_ */
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
-@@ -0,0 +1,1216 @@
-+/*
-+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/cpu_rmap.h>
-+#include <linux/of.h>
-+#include <linux/of_net.h>
-+#include <linux/timer.h>
-+#include "edma.h"
-+#include "ess_edma.h"
-+
-+/* Weight round robin and virtual QID mask */
-+#define EDMA_WRR_VID_SCTL_MASK 0xffff
-+
-+/* Weight round robin and virtual QID shift */
-+#define EDMA_WRR_VID_SCTL_SHIFT 16
-+
-+char edma_axi_driver_name[] = "ess_edma";
-+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
-+	NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
-+
-+static u32 edma_hw_addr;
-+
-+char edma_tx_irq[16][64];
-+char edma_rx_irq[8][64];
-+struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
-+static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1,
-+			EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3};
-+static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1,
-+			EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3};
-+
-+static u32 edma_default_ltag  __read_mostly = EDMA_LAN_DEFAULT_VLAN;
-+static u32 edma_default_wtag  __read_mostly = EDMA_WAN_DEFAULT_VLAN;
-+static u32 edma_default_group1_vtag  __read_mostly = EDMA_DEFAULT_GROUP1_VLAN;
-+static u32 edma_default_group2_vtag  __read_mostly = EDMA_DEFAULT_GROUP2_VLAN;
-+static u32 edma_default_group3_vtag  __read_mostly = EDMA_DEFAULT_GROUP3_VLAN;
-+static u32 edma_default_group4_vtag  __read_mostly = EDMA_DEFAULT_GROUP4_VLAN;
-+static u32 edma_default_group5_vtag  __read_mostly = EDMA_DEFAULT_GROUP5_VLAN;
-+static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE;
-+static u32 edma_rss_idt_idx;
-+
-+static int edma_weight_assigned_to_q __read_mostly;
-+static int edma_queue_to_virtual_q __read_mostly;
-+static bool edma_enable_rstp  __read_mostly;
-+static int edma_athr_hdr_eth_type __read_mostly;
-+
-+static int page_mode;
-+module_param(page_mode, int, 0);
-+MODULE_PARM_DESC(page_mode, "enable page mode");
-+
-+static int overwrite_mode;
-+module_param(overwrite_mode, int, 0);
-+MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting");
-+
-+static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE;
-+module_param(jumbo_mru, int, 0);
-+MODULE_PARM_DESC(jumbo_mru, "enable fraglist support");
-+
-+static int num_rxq = 4;
-+module_param(num_rxq, int, 0);
-+MODULE_PARM_DESC(num_rxq, "change the number of rx queues");
-+
-+void edma_write_reg(u16 reg_addr, u32 reg_value)
-+{
-+	writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr)));
-+}
-+
-+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value)
-+{
-+	*reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
-+}
-+
-+/* edma_change_tx_coalesce()
-+ *	change tx interrupt moderation timer
-+ */
-+void edma_change_tx_coalesce(int usecs)
-+{
-+	u32 reg_value;
-+
-+	/* Here, we right shift the value from the user by 1, this is
-+	 * done because IMT resolution timer is 2usecs. 1 count
-+	 * of this register corresponds to 2 usecs.
-+	 */
-+	edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
-+	reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16));
-+	edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
-+}
-+
-+/* edma_change_rx_coalesce()
-+ *	change rx interrupt moderation timer
-+ */
-+void edma_change_rx_coalesce(int usecs)
-+{
-+	u32 reg_value;
-+
-+	/* Here, we right shift the value from the user by 1, this is
-+	 * done because IMT resolution timer is 2usecs. 1 count
-+	 * of this register corresponds to 2 usecs.
-+	 */
-+	edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
-+	reg_value = ((reg_value & 0xffff0000) | (usecs >> 1));
-+	edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
-+}
-+
-+/* edma_get_tx_rx_coalesce()
-+ *	Get tx/rx interrupt moderation value
-+ */
-+void edma_get_tx_rx_coalesce(u32 *reg_val)
-+{
-+	edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val);
-+}
-+
-+void edma_read_append_stats(struct edma_common_info *edma_cinfo)
-+{
-+	uint32_t *p;
-+	int i;
-+	u32 stat;
-+
-+	spin_lock(&edma_cinfo->stats_lock);
-+	p = (uint32_t *)&(edma_cinfo->edma_ethstats);
-+
-+	for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
-+		edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat);
-+		*p += stat;
-+		p++;
-+	}
-+
-+	for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
-+		edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat);
-+		*p += stat;
-+		p++;
-+	}
-+
-+	for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
-+		edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat);
-+		*p += stat;
-+		p++;
-+	}
-+
-+	for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
-+		edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat);
-+		*p += stat;
-+		p++;
-+	}
-+
-+	spin_unlock(&edma_cinfo->stats_lock);
-+}
-+
-+static void edma_statistics_timer(struct timer_list *t)
-+{
-+	struct edma_common_info *edma_cinfo =
-+		from_timer(edma_cinfo, t, edma_stats_timer);
-+
-+	edma_read_append_stats(edma_cinfo);
-+
-+	mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ);
-+}
-+
-+static int edma_enable_stp_rstp(struct ctl_table *table, int write,
-+				void __user *buffer, size_t *lenp,
-+				loff_t *ppos)
-+{
-+	int ret;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+	if (write)
-+		edma_set_stp_rstp(edma_enable_rstp);
-+
-+	return ret;
-+}
-+
-+static int edma_ath_hdr_eth_type(struct ctl_table *table, int write,
-+				 void __user *buffer, size_t *lenp,
-+				 loff_t *ppos)
-+{
-+	int ret;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+	if (write)
-+		edma_assign_ath_hdr_type(edma_athr_hdr_eth_type);
-+
-+	return ret;
-+}
-+
-+static int edma_change_default_lan_vlan(struct ctl_table *table, int write,
-+					void __user *buffer, size_t *lenp,
-+					loff_t *ppos)
-+{
-+	struct edma_adapter *adapter;
-+	int ret;
-+
-+	if (!edma_netdev[1]) {
-+		pr_err("Netdevice for default_lan does not exist\n");
-+		return -1;
-+	}
-+
-+	adapter = netdev_priv(edma_netdev[1]);
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+	if (write)
-+		adapter->default_vlan_tag = edma_default_ltag;
-+
-+	return ret;
-+}
-+
-+static int edma_change_default_wan_vlan(struct ctl_table *table, int write,
-+					void __user *buffer, size_t *lenp,
-+					loff_t *ppos)
-+{
-+	struct edma_adapter *adapter;
-+	int ret;
-+
-+	if (!edma_netdev[0]) {
-+		pr_err("Netdevice for default_wan does not exist\n");
-+		return -1;
-+	}
-+
-+	adapter = netdev_priv(edma_netdev[0]);
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+	if (write)
-+		adapter->default_vlan_tag = edma_default_wtag;
-+
-+	return ret;
-+}
-+
-+static int edma_change_group1_vtag(struct ctl_table *table, int write,
-+				   void __user *buffer, size_t *lenp,
-+				   loff_t *ppos)
-+{
-+	struct edma_adapter *adapter;
-+	struct edma_common_info *edma_cinfo;
-+	int ret;
-+
-+	if (!edma_netdev[0]) {
-+		pr_err("Netdevice for Group 1 does not exist\n");
-+		return -1;
-+	}
-+
-+	adapter = netdev_priv(edma_netdev[0]);
-+	edma_cinfo = adapter->edma_cinfo;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+	if (write)
-+		adapter->default_vlan_tag = edma_default_group1_vtag;
-+
-+	return ret;
-+}
-+
-+static int edma_change_group2_vtag(struct ctl_table *table, int write,
-+				   void __user *buffer, size_t *lenp,
-+				   loff_t *ppos)
-+{
-+	struct edma_adapter *adapter;
-+	struct edma_common_info *edma_cinfo;
-+	int ret;
-+
-+	if (!edma_netdev[1]) {
-+		pr_err("Netdevice for Group 2 does not exist\n");
-+		return -1;
-+	}
-+
-+	adapter = netdev_priv(edma_netdev[1]);
-+	edma_cinfo = adapter->edma_cinfo;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+	if (write)
-+		adapter->default_vlan_tag = edma_default_group2_vtag;
-+
-+	return ret;
-+}
-+
-+static int edma_change_group3_vtag(struct ctl_table *table, int write,
-+				   void __user *buffer, size_t *lenp,
-+				   loff_t *ppos)
-+{
-+	struct edma_adapter *adapter;
-+	struct edma_common_info *edma_cinfo;
-+	int ret;
-+
-+	if (!edma_netdev[2]) {
-+		pr_err("Netdevice for Group 3 does not exist\n");
-+		return -1;
-+	}
-+
-+	adapter = netdev_priv(edma_netdev[2]);
-+	edma_cinfo = adapter->edma_cinfo;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+	if (write)
-+		adapter->default_vlan_tag = edma_default_group3_vtag;
-+
-+	return ret;
-+}
-+
-+static int edma_change_group4_vtag(struct ctl_table *table, int write,
-+				   void __user *buffer, size_t *lenp,
-+				   loff_t *ppos)
-+{
-+	struct edma_adapter *adapter;
-+	struct edma_common_info *edma_cinfo;
-+	int ret;
-+
-+	if (!edma_netdev[3]) {
-+		pr_err("Netdevice for Group 4 does not exist\n");
-+		return -1;
-+	}
-+
-+	adapter = netdev_priv(edma_netdev[3]);
-+	edma_cinfo = adapter->edma_cinfo;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+	if (write)
-+		adapter->default_vlan_tag = edma_default_group4_vtag;
-+
-+	return ret;
-+}
-+
-+static int edma_change_group5_vtag(struct ctl_table *table, int write,
-+				   void __user *buffer, size_t *lenp,
-+				   loff_t *ppos)
-+{
-+	struct edma_adapter *adapter;
-+	struct edma_common_info *edma_cinfo;
-+	int ret;
-+
-+	if (!edma_netdev[4]) {
-+		pr_err("Netdevice for Group 5 does not exist\n");
-+		return -1;
-+	}
-+
-+	adapter = netdev_priv(edma_netdev[4]);
-+	edma_cinfo = adapter->edma_cinfo;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+	if (write)
-+		adapter->default_vlan_tag = edma_default_group5_vtag;
-+
-+	return ret;
-+}
-+
-+static int edma_set_rss_idt_value(struct ctl_table *table, int write,
-+				  void __user *buffer, size_t *lenp,
-+				  loff_t *ppos)
-+{
-+	int ret;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+	if (write && !ret)
-+		edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx),
-+			       edma_rss_idt_val);
-+	return ret;
-+}
-+
-+static int edma_set_rss_idt_idx(struct ctl_table *table, int write,
-+				void __user *buffer, size_t *lenp,
-+				loff_t *ppos)
-+{
-+	int ret;
-+	u32 old_value = edma_rss_idt_idx;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+	if (!write || ret)
-+		return ret;
-+
-+	if (edma_rss_idt_idx >= EDMA_NUM_IDT) {
-+		pr_err("Invalid RSS indirection table index %d\n",
-+		       edma_rss_idt_idx);
-+		edma_rss_idt_idx = old_value;
-+		return -EINVAL;
-+	}
-+	return ret;
-+}
-+
-+static int edma_weight_assigned_to_queues(struct ctl_table *table, int write,
-+					  void __user *buffer, size_t *lenp,
-+					  loff_t *ppos)
-+{
-+	int ret, queue_id, weight;
-+	u32 reg_data, data, reg_addr;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+	if (write) {
-+		queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK;
-+		if (queue_id < 0 || queue_id > 15) {
-+			pr_err("queue_id not within desired range\n");
-+			return -EINVAL;
-+		}
-+
-+		weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT;
-+		if (weight < 0 || weight > 0xF) {
-+			pr_err("queue_id not within desired range\n");
-+			return -EINVAL;
-+		}
-+
-+		data = weight << EDMA_WRR_SHIFT(queue_id);
-+
-+		reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3);
-+		edma_read_reg(reg_addr, &reg_data);
-+		reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id));
-+		edma_write_reg(reg_addr, data | reg_data);
-+	}
-+
-+	return ret;
-+}
-+
-+static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write,
-+					   void __user *buffer, size_t *lenp,
-+					   loff_t *ppos)
-+{
-+	int ret, queue_id, virtual_qid;
-+	u32 reg_data, data, reg_addr;
-+
-+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+	if (write) {
-+		queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK;
-+		if (queue_id < 0 || queue_id > 15) {
-+			pr_err("queue_id not within desired range\n");
-+			return -EINVAL;
-+		}
-+
-+		virtual_qid = edma_queue_to_virtual_q >>
-+			EDMA_WRR_VID_SCTL_SHIFT;
-+		if (virtual_qid < 0 || virtual_qid > 8) {
-+			pr_err("queue_id not within desired range\n");
-+			return -EINVAL;
-+		}
-+
-+		data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id);
-+
-+		reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3);
-+		edma_read_reg(reg_addr, &reg_data);
-+		reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id));
-+		edma_write_reg(reg_addr, data | reg_data);
-+	}
-+
-+	return ret;
-+}
-+
-+static struct ctl_table edma_table[] = {
-+	{
-+		.procname       = "default_lan_tag",
-+		.data           = &edma_default_ltag,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_change_default_lan_vlan
-+	},
-+	{
-+		.procname       = "default_wan_tag",
-+		.data           = &edma_default_wtag,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_change_default_wan_vlan
-+	},
-+	{
-+		.procname       = "weight_assigned_to_queues",
-+		.data           = &edma_weight_assigned_to_q,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_weight_assigned_to_queues
-+	},
-+	{
-+		.procname       = "queue_to_virtual_queue_map",
-+		.data           = &edma_queue_to_virtual_q,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_queue_to_virtual_queue_map
-+	},
-+	{
-+		.procname       = "enable_stp_rstp",
-+		.data           = &edma_enable_rstp,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_enable_stp_rstp
-+	},
-+	{
-+		.procname       = "athr_hdr_eth_type",
-+		.data           = &edma_athr_hdr_eth_type,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_ath_hdr_eth_type
-+	},
-+	{
-+		.procname       = "default_group1_vlan_tag",
-+		.data           = &edma_default_group1_vtag,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_change_group1_vtag
-+	},
-+	{
-+		.procname       = "default_group2_vlan_tag",
-+		.data           = &edma_default_group2_vtag,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_change_group2_vtag
-+	},
-+	{
-+		.procname       = "default_group3_vlan_tag",
-+		.data           = &edma_default_group3_vtag,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_change_group3_vtag
-+	},
-+	{
-+		.procname       = "default_group4_vlan_tag",
-+		.data           = &edma_default_group4_vtag,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_change_group4_vtag
-+	},
-+	{
-+		.procname       = "default_group5_vlan_tag",
-+		.data           = &edma_default_group5_vtag,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_change_group5_vtag
-+	},
-+	{
-+		.procname       = "edma_rss_idt_value",
-+		.data           = &edma_rss_idt_val,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_set_rss_idt_value
-+	},
-+	{
-+		.procname       = "edma_rss_idt_idx",
-+		.data           = &edma_rss_idt_idx,
-+		.maxlen         = sizeof(int),
-+		.mode           = 0644,
-+		.proc_handler   = edma_set_rss_idt_idx
-+	},
-+	{}
-+};
-+
-+/* edma_axi_netdev_ops
-+ *	Describe the operations supported by registered netdevices
-+ *
-+ * static const struct net_device_ops edma_axi_netdev_ops = {
-+ *	.ndo_open               = edma_open,
-+ *	.ndo_stop               = edma_close,
-+ *	.ndo_start_xmit         = edma_xmit_frame,
-+ *	.ndo_set_mac_address    = edma_set_mac_addr,
-+ * }
-+ */
-+static const struct net_device_ops edma_axi_netdev_ops = {
-+	.ndo_open               = edma_open,
-+	.ndo_stop               = edma_close,
-+	.ndo_start_xmit         = edma_xmit,
-+	.ndo_set_mac_address    = edma_set_mac_addr,
-+#ifdef CONFIG_RFS_ACCEL
-+	.ndo_rx_flow_steer      = edma_rx_flow_steer,
-+	.ndo_register_rfs_filter = edma_register_rfs_filter,
-+	.ndo_get_default_vlan_tag = edma_get_default_vlan_tag,
-+#endif
-+	.ndo_get_stats          = edma_get_stats,
-+};
-+
-+/* edma_axi_probe()
-+ *	Initialise an adapter identified by a platform_device structure.
-+ *
-+ * The OS initialization, configuring of the adapter private structure,
-+ * and a hardware reset occur in the probe.
-+ */
-+static int edma_axi_probe(struct platform_device *pdev)
-+{
-+	struct edma_common_info *edma_cinfo;
-+	struct edma_hw *hw;
-+	struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED];
-+	struct resource *res;
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *pnp;
-+	struct device_node *mdio_node = NULL;
-+	struct platform_device *mdio_plat = NULL;
-+	struct mii_bus *miibus = NULL;
-+	struct edma_mdio_data *mdio_data = NULL;
-+	int i, j, k, err = 0;
-+	int portid_bmp;
-+	int idx = 0, idx_mac = 0;
-+
-+	if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) {
-+		dev_err(&pdev->dev, "Invalid CPU Cores\n");
-+		return -EINVAL;
-+	}
-+
-+	if ((num_rxq != 4) && (num_rxq != 8)) {
-+		dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n");
-+		return -EINVAL;
-+	}
-+	edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL);
-+	if (!edma_cinfo) {
-+		err = -ENOMEM;
-+		goto err_alloc;
-+	}
-+
-+	edma_cinfo->pdev = pdev;
-+
-+	of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac);
-+	if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) {
-+		pr_err("Invalid DTSI Entry for qcom,num_gmac\n");
-+		err = -EINVAL;
-+		goto err_cinfo;
-+	}
-+
-+	/* Initialize the netdev array before allocation
-+	 * to avoid double free
-+	 */
-+	for (i = 0 ; i < edma_cinfo->num_gmac ; i++)
-+		edma_netdev[i] = NULL;
-+
-+	for (i = 0 ; i < edma_cinfo->num_gmac ; i++) {
-+		edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter),
-+			EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE);
-+
-+		if (!edma_netdev[i]) {
-+			dev_err(&pdev->dev,
-+				"net device alloc fails for index=%d\n", i);
-+			err = -ENODEV;
-+			goto err_ioremap;
-+		}
-+
-+		SET_NETDEV_DEV(edma_netdev[i], &pdev->dev);
-+		platform_set_drvdata(pdev, edma_netdev[i]);
-+		edma_cinfo->netdev[i] = edma_netdev[i];
-+	}
-+
-+	/* Fill ring details */
-+	edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE;
-+	edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4);
-+	edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE;
-+
-+	/* Update num rx queues based on module parameter */
-+	edma_cinfo->num_rx_queues = num_rxq;
-+	edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2);
-+
-+	edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE;
-+
-+	hw = &edma_cinfo->hw;
-+
-+	/* Fill HW defaults */
-+	hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK;
-+	hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK;
-+
-+	of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode);
-+	of_property_read_u32(np, "qcom,rx_head_buf_size",
-+			     &hw->rx_head_buff_size);
-+
-+	if (overwrite_mode) {
-+		dev_info(&pdev->dev, "page mode overwritten");
-+		edma_cinfo->page_mode = page_mode;
-+	}
-+
-+	if (jumbo_mru)
-+		edma_cinfo->fraglist_mode = 1;
-+
-+	if (edma_cinfo->page_mode)
-+		hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO;
-+	else if (edma_cinfo->fraglist_mode)
-+		hw->rx_head_buff_size = jumbo_mru;
-+	else if (!hw->rx_head_buff_size)
-+		hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE;
-+
-+	hw->misc_intr_mask = 0;
-+	hw->wol_intr_mask = 0;
-+
-+	hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE;
-+	hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE;
-+
-+	/* configure RSS type to the different protocol that can be
-+	 * supported
-+	 */
-+	hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP |
-+		EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP |
-+		EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+	edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(edma_cinfo->hw.hw_addr)) {
-+		err = PTR_ERR(edma_cinfo->hw.hw_addr);
-+		goto err_ioremap;
-+	}
-+
-+	edma_hw_addr = (u32)edma_cinfo->hw.hw_addr;
-+
-+	/* Parse tx queue interrupt number from device tree */
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++)
-+		edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i);
-+
-+	/* Parse rx queue interrupt number from device tree
-+	 * Here we are setting j to point to the point where we
-+	 * left tx interrupt parsing(i.e 16) and run run the loop
-+	 * from 0 to 7 to parse rx interrupt number.
-+	 */
-+	for (i = 0, j = edma_cinfo->num_tx_queues, k = 0;
-+			i < edma_cinfo->num_rx_queues; i++) {
-+		edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j);
-+		k += ((num_rxq == 4) ?  2 : 1);
-+		j += ((num_rxq == 4) ?  2 : 1);
-+	}
-+
-+	edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size;
-+	edma_cinfo->rx_page_buffer_len = PAGE_SIZE;
-+
-+	err = edma_alloc_queues_tx(edma_cinfo);
-+	if (err) {
-+		dev_err(&pdev->dev, "Allocation of TX queue failed\n");
-+		goto err_tx_qinit;
-+	}
-+
-+	err = edma_alloc_queues_rx(edma_cinfo);
-+	if (err) {
-+		dev_err(&pdev->dev, "Allocation of RX queue failed\n");
-+		goto err_rx_qinit;
-+	}
-+
-+	err = edma_alloc_tx_rings(edma_cinfo);
-+	if (err) {
-+		dev_err(&pdev->dev, "Allocation of TX resources failed\n");
-+		goto err_tx_rinit;
-+	}
-+
-+	err = edma_alloc_rx_rings(edma_cinfo);
-+	if (err) {
-+		dev_err(&pdev->dev, "Allocation of RX resources failed\n");
-+		goto err_rx_rinit;
-+	}
-+
-+	/* Initialize netdev and netdev bitmap for transmit descriptor rings */
-+	for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+		struct edma_tx_desc_ring *etdr =  edma_cinfo->tpd_ring[i];
-+		int j;
-+
-+		etdr->netdev_bmp = 0;
-+		for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) {
-+			etdr->netdev[j] = NULL;
-+			etdr->nq[j] = NULL;
-+		}
-+	}
-+
-+	if (of_property_read_bool(np, "qcom,mdio_supported")) {
-+		mdio_node = of_find_compatible_node(NULL, NULL,
-+						    "qcom,ipq4019-mdio");
-+		if (!mdio_node) {
-+			dev_err(&pdev->dev, "cannot find mdio node by phandle");
-+			err = -EIO;
-+			goto err_mdiobus_init_fail;
-+		}
-+
-+		mdio_plat = of_find_device_by_node(mdio_node);
-+		if (!mdio_plat) {
-+			dev_err(&pdev->dev,
-+				"cannot find platform device from mdio node");
-+			of_node_put(mdio_node);
-+			err = -EIO;
-+			goto err_mdiobus_init_fail;
-+		}
-+
-+		mdio_data = dev_get_drvdata(&mdio_plat->dev);
-+		if (!mdio_data) {
-+			dev_err(&pdev->dev,
-+				"cannot get mii bus reference from device data");
-+			of_node_put(mdio_node);
-+			err = -EIO;
-+			goto err_mdiobus_init_fail;
-+		}
-+
-+		miibus = mdio_data->mii_bus;
-+	}
-+
-+	for_each_available_child_of_node(np, pnp) {
-+		const char *mac_addr;
-+
-+		/* this check is needed if parent and daughter dts have
-+		 * different number of gmac nodes
-+		 */
-+		if (idx_mac == edma_cinfo->num_gmac) {
-+			of_node_put(np);
-+			break;
-+		}
-+
-+		mac_addr = of_get_mac_address(pnp);
-+		if (mac_addr)
-+			memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN);
-+
-+		idx_mac++;
-+	}
-+
-+	/* Populate the adapter structure register the netdevice */
-+	for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+		int k, m;
-+
-+		adapter[i] = netdev_priv(edma_netdev[i]);
-+		adapter[i]->netdev = edma_netdev[i];
-+		adapter[i]->pdev = pdev;
-+		for (j = 0; j < CONFIG_NR_CPUS; j++) {
-+			m = i % 2;
-+			adapter[i]->tx_start_offset[j] =
-+				((j << EDMA_TX_CPU_START_SHIFT) + (m << 1));
-+			/* Share the queues with available net-devices.
-+			 * For instance , with 5 net-devices
-+			 * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13
-+			 * and eth1/eth3 will get the remaining.
-+			 */
-+			for (k = adapter[i]->tx_start_offset[j]; k <
-+			     (adapter[i]->tx_start_offset[j] + 2); k++) {
-+				if (edma_fill_netdev(edma_cinfo, k, i, j)) {
-+					pr_err("Netdev overflow Error\n");
-+					goto err_register;
-+				}
-+			}
-+		}
-+
-+		adapter[i]->edma_cinfo = edma_cinfo;
-+		edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops;
-+		edma_netdev[i]->max_mtu = 9000;
-+		edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
-+				      | NETIF_F_HW_VLAN_CTAG_TX
-+				      | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
-+				      NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO;
-+		edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
-+				NETIF_F_HW_VLAN_CTAG_RX
-+				| NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
-+				NETIF_F_GRO;
-+		edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG |
-+					   NETIF_F_TSO | NETIF_F_TSO6 |
-+					   NETIF_F_GRO;
-+		edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
-+					     NETIF_F_TSO | NETIF_F_TSO6 |
-+					     NETIF_F_GRO;
-+
-+#ifdef CONFIG_RFS_ACCEL
-+		edma_netdev[i]->features |=  NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+		edma_netdev[i]->hw_features |=  NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+		edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+		edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+#endif
-+		edma_set_ethtool_ops(edma_netdev[i]);
-+
-+		/* This just fill in some default MAC address
-+		 */
-+		if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) {
-+			random_ether_addr(edma_netdev[i]->dev_addr);
-+			pr_info("EDMA using MAC@ - using");
-+			pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n",
-+			*(edma_netdev[i]->dev_addr),
-+			*(edma_netdev[i]->dev_addr + 1),
-+			*(edma_netdev[i]->dev_addr + 2),
-+			*(edma_netdev[i]->dev_addr + 3),
-+			*(edma_netdev[i]->dev_addr + 4),
-+			*(edma_netdev[i]->dev_addr + 5));
-+		}
-+
-+		err = register_netdev(edma_netdev[i]);
-+		if (err)
-+			goto err_register;
-+
-+		/* carrier off reporting is important to
-+		 * ethtool even BEFORE open
-+		 */
-+		netif_carrier_off(edma_netdev[i]);
-+
-+		/* Allocate reverse irq cpu mapping structure for
-+		* receive queues
-+		*/
-+#ifdef CONFIG_RFS_ACCEL
-+		edma_netdev[i]->rx_cpu_rmap =
-+			alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE);
-+		if (!edma_netdev[i]->rx_cpu_rmap) {
-+			err = -ENOMEM;
-+			goto err_rmap_alloc_fail;
-+		}
-+#endif
-+	}
-+
-+	for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++)
-+		edma_cinfo->portid_netdev_lookup_tbl[i] = NULL;
-+
-+	for_each_available_child_of_node(np, pnp) {
-+		const uint32_t *vlan_tag = NULL;
-+		int len;
-+
-+		/* this check is needed if parent and daughter dts have
-+		 * different number of gmac nodes
-+		 */
-+		if (idx == edma_cinfo->num_gmac)
-+			break;
-+
-+		/* Populate port-id to netdev lookup table */
-+		vlan_tag = of_get_property(pnp, "vlan_tag", &len);
-+		if (!vlan_tag) {
-+			pr_err("Vlan tag parsing Failed.\n");
-+			goto err_rmap_alloc_fail;
-+		}
-+
-+		adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1);
-+		vlan_tag++;
-+		portid_bmp = of_read_number(vlan_tag, 1);
-+		adapter[idx]->dp_bitmap = portid_bmp;
-+
-+		portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */
-+		while (portid_bmp) {
-+			int port_bit = ffs(portid_bmp);
-+
-+			if (port_bit > EDMA_MAX_PORTID_SUPPORTED)
-+				goto err_rmap_alloc_fail;
-+			edma_cinfo->portid_netdev_lookup_tbl[port_bit] =
-+				edma_netdev[idx];
-+			portid_bmp &= ~(1 << (port_bit - 1));
-+		}
-+
-+		if (!of_property_read_u32(pnp, "qcom,poll_required",
-+					  &adapter[idx]->poll_required)) {
-+			if (adapter[idx]->poll_required) {
-+				of_property_read_u32(pnp, "qcom,phy_mdio_addr",
-+						     &adapter[idx]->phy_mdio_addr);
-+				of_property_read_u32(pnp, "qcom,forced_speed",
-+						     &adapter[idx]->forced_speed);
-+				of_property_read_u32(pnp, "qcom,forced_duplex",
-+						     &adapter[idx]->forced_duplex);
-+
-+				/* create a phyid using MDIO bus id
-+				 * and MDIO bus address
-+				 */
-+				snprintf(adapter[idx]->phy_id,
-+					 MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-+					 miibus->id,
-+					 adapter[idx]->phy_mdio_addr);
-+			}
-+		} else {
-+			adapter[idx]->poll_required = 0;
-+			adapter[idx]->forced_speed = SPEED_1000;
-+			adapter[idx]->forced_duplex = DUPLEX_FULL;
-+		}
-+
-+		idx++;
-+	}
-+
-+	edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net,
-+							     "net/edma",
-+							     edma_table);
-+	if (!edma_cinfo->edma_ctl_table_hdr) {
-+		dev_err(&pdev->dev, "edma sysctl table hdr not registered\n");
-+		goto err_unregister_sysctl_tbl;
-+	}
-+
-+	/* Disable all 16 Tx and 8 rx irqs */
-+	edma_irq_disable(edma_cinfo);
-+
-+	err = edma_reset(edma_cinfo);
-+	if (err) {
-+		err = -EIO;
-+		goto err_reset;
-+	}
-+
-+	/* populate per_core_info, do a napi_Add, request 16 TX irqs,
-+	 * 8 RX irqs, do a napi enable
-+	 */
-+	for (i = 0; i < CONFIG_NR_CPUS; i++) {
-+		u8 rx_start;
-+
-+		edma_cinfo->edma_percpu_info[i].napi.state = 0;
-+
-+		netif_napi_add(edma_netdev[0],
-+			       &edma_cinfo->edma_percpu_info[i].napi,
-+			       edma_poll, 64);
-+		napi_enable(&edma_cinfo->edma_percpu_info[i].napi);
-+		edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i];
-+		edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK
-+				<< (i << EDMA_RX_PER_CPU_MASK_SHIFT);
-+		edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i];
-+		edma_cinfo->edma_percpu_info[i].rx_start =
-+			i << EDMA_RX_CPU_START_SHIFT;
-+		rx_start = i << EDMA_RX_CPU_START_SHIFT;
-+		edma_cinfo->edma_percpu_info[i].tx_status = 0;
-+		edma_cinfo->edma_percpu_info[i].rx_status = 0;
-+		edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo;
-+
-+		/* Request irq per core */
-+		for (j = edma_cinfo->edma_percpu_info[i].tx_start;
-+		     j < tx_start[i] + 4; j++) {
-+			sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j);
-+			err = request_irq(edma_cinfo->tx_irq[j],
-+					  edma_interrupt,
-+					  0,
-+					  &edma_tx_irq[j][0],
-+					  &edma_cinfo->edma_percpu_info[i]);
-+			if (err)
-+				goto err_reset;
-+		}
-+
-+		for (j = edma_cinfo->edma_percpu_info[i].rx_start;
-+		     j < (rx_start +
-+		     ((edma_cinfo->num_rx_queues == 4) ? 1 : 2));
-+		     j++) {
-+			sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j);
-+			err = request_irq(edma_cinfo->rx_irq[j],
-+					  edma_interrupt,
-+					  0,
-+					  &edma_rx_irq[j][0],
-+					  &edma_cinfo->edma_percpu_info[i]);
-+			if (err)
-+				goto err_reset;
-+		}
-+
-+#ifdef CONFIG_RFS_ACCEL
-+		for (j = edma_cinfo->edma_percpu_info[i].rx_start;
-+		     j < rx_start + 2; j += 2) {
-+			err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap,
-+					       edma_cinfo->rx_irq[j]);
-+			if (err)
-+				goto err_rmap_add_fail;
-+		}
-+#endif
-+	}
-+
-+	/* Used to clear interrupt status, allocate rx buffer,
-+	 * configure edma descriptors registers
-+	 */
-+	err = edma_configure(edma_cinfo);
-+	if (err) {
-+		err = -EIO;
-+		goto err_configure;
-+	}
-+
-+	/* Configure RSS indirection table.
-+	 * 128 hash will be configured in the following
-+	 * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
-+	 * and so on
-+	 */
-+	for (i = 0; i < EDMA_NUM_IDT; i++)
-+		edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE);
-+
-+	/* Configure load balance mapping table.
-+	 * 4 table entry will be configured according to the
-+	 * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4}
-+	 * respectively.
-+	 */
-+	edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE);
-+
-+	/* Configure Virtual queue for Tx rings
-+	 * User can also change this value runtime through
-+	 * a sysctl
-+	 */
-+	edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE);
-+	edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE);
-+
-+	/* Configure Max AXI Burst write size to 128 bytes*/
-+	edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE,
-+		       EDMA_AXIW_MAXWRSIZE_VALUE);
-+
-+	/* Enable All 16 tx and 8 rx irq mask */
-+	edma_irq_enable(edma_cinfo);
-+	edma_enable_tx_ctrl(&edma_cinfo->hw);
-+	edma_enable_rx_ctrl(&edma_cinfo->hw);
-+
-+	for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+		if (adapter[i]->poll_required) {
-+			adapter[i]->phydev =
-+				phy_connect(edma_netdev[i],
-+					    (const char *)adapter[i]->phy_id,
-+					    &edma_adjust_link,
-+					    PHY_INTERFACE_MODE_SGMII);
-+			if (IS_ERR(adapter[i]->phydev)) {
-+				dev_dbg(&pdev->dev, "PHY attach FAIL");
-+				err = -EIO;
-+				goto edma_phy_attach_fail;
-+			} else {
-+				adapter[i]->phydev->advertising |=
-+					ADVERTISED_Pause |
-+					ADVERTISED_Asym_Pause;
-+				adapter[i]->phydev->supported |=
-+					SUPPORTED_Pause |
-+					SUPPORTED_Asym_Pause;
-+			}
-+		} else {
-+			adapter[i]->phydev = NULL;
-+		}
-+	}
-+
-+	spin_lock_init(&edma_cinfo->stats_lock);
-+
-+	timer_setup(&edma_cinfo->edma_stats_timer, edma_statistics_timer, 0);
-+	mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ);
-+
-+	return 0;
-+
-+edma_phy_attach_fail:
-+	miibus = NULL;
-+err_configure:
-+#ifdef CONFIG_RFS_ACCEL
-+	for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+		free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap);
-+		adapter[i]->netdev->rx_cpu_rmap = NULL;
-+	}
-+#endif
-+err_rmap_add_fail:
-+	edma_free_irqs(adapter[0]);
-+	for (i = 0; i < CONFIG_NR_CPUS; i++)
-+		napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
-+err_reset:
-+err_unregister_sysctl_tbl:
-+err_rmap_alloc_fail:
-+	for (i = 0; i < edma_cinfo->num_gmac; i++)
-+		unregister_netdev(edma_netdev[i]);
-+err_register:
-+err_mdiobus_init_fail:
-+	edma_free_rx_rings(edma_cinfo);
-+err_rx_rinit:
-+	edma_free_tx_rings(edma_cinfo);
-+err_tx_rinit:
-+	edma_free_queues(edma_cinfo);
-+err_rx_qinit:
-+err_tx_qinit:
-+	iounmap(edma_cinfo->hw.hw_addr);
-+err_ioremap:
-+	for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+		if (edma_netdev[i])
-+			free_netdev(edma_netdev[i]);
-+	}
-+err_cinfo:
-+	kfree(edma_cinfo);
-+err_alloc:
-+	return err;
-+}
-+
-+/* edma_axi_remove()
-+ *	Device Removal Routine
-+ *
-+ * edma_axi_remove is called by the platform subsystem to alert the driver
-+ * that it should release a platform device.
-+ */
-+static int edma_axi_remove(struct platform_device *pdev)
-+{
-+	struct edma_adapter *adapter = netdev_priv(edma_netdev[0]);
-+	struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+	struct edma_hw *hw = &edma_cinfo->hw;
-+	int i;
-+
-+	for (i = 0; i < edma_cinfo->num_gmac; i++)
-+		unregister_netdev(edma_netdev[i]);
-+
-+	edma_stop_rx_tx(hw);
-+	for (i = 0; i < CONFIG_NR_CPUS; i++)
-+		napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
-+
-+	edma_irq_disable(edma_cinfo);
-+	edma_write_reg(EDMA_REG_RX_ISR, 0xff);
-+	edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
-+#ifdef CONFIG_RFS_ACCEL
-+	for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+		free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap);
-+		edma_netdev[i]->rx_cpu_rmap = NULL;
-+	}
-+#endif
-+
-+	for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+		struct edma_adapter *adapter = netdev_priv(edma_netdev[i]);
-+
-+		if (adapter->phydev)
-+			phy_disconnect(adapter->phydev);
-+	}
-+
-+	del_timer_sync(&edma_cinfo->edma_stats_timer);
-+	edma_free_irqs(adapter);
-+	unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
-+	edma_free_tx_resources(edma_cinfo);
-+	edma_free_rx_resources(edma_cinfo);
-+	edma_free_tx_rings(edma_cinfo);
-+	edma_free_rx_rings(edma_cinfo);
-+	edma_free_queues(edma_cinfo);
-+	for (i = 0; i < edma_cinfo->num_gmac; i++)
-+		free_netdev(edma_netdev[i]);
-+
-+	kfree(edma_cinfo);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id edma_of_mtable[] = {
-+	{.compatible = "qcom,ess-edma" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, edma_of_mtable);
-+
-+static struct platform_driver edma_axi_driver = {
-+	.driver = {
-+		.name    = edma_axi_driver_name,
-+		.of_match_table = edma_of_mtable,
-+	},
-+	.probe    = edma_axi_probe,
-+	.remove   = edma_axi_remove,
-+};
-+
-+module_platform_driver(edma_axi_driver);
-+
-+MODULE_AUTHOR("Qualcomm Atheros Inc");
-+MODULE_DESCRIPTION("QCA ESS EDMA driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
-@@ -0,0 +1,374 @@
-+/*
-+ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/ethtool.h>
-+#include <linux/netdevice.h>
-+#include <linux/string.h>
-+#include "edma.h"
-+
-+struct edma_ethtool_stats {
-+	uint8_t stat_string[ETH_GSTRING_LEN];
-+	uint32_t stat_offset;
-+};
-+
-+#define EDMA_STAT(m)    offsetof(struct edma_ethtool_statistics, m)
-+#define DRVINFO_LEN	32
-+
-+/* Array of strings describing statistics
-+ */
-+static const struct edma_ethtool_stats edma_gstrings_stats[] = {
-+	{"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)},
-+	{"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)},
-+	{"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)},
-+	{"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)},
-+	{"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)},
-+	{"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)},
-+	{"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)},
-+	{"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)},
-+	{"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)},
-+	{"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)},
-+	{"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)},
-+	{"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)},
-+	{"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)},
-+	{"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)},
-+	{"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)},
-+	{"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)},
-+	{"tx_q0_byte", EDMA_STAT(tx_q0_byte)},
-+	{"tx_q1_byte", EDMA_STAT(tx_q1_byte)},
-+	{"tx_q2_byte", EDMA_STAT(tx_q2_byte)},
-+	{"tx_q3_byte", EDMA_STAT(tx_q3_byte)},
-+	{"tx_q4_byte", EDMA_STAT(tx_q4_byte)},
-+	{"tx_q5_byte", EDMA_STAT(tx_q5_byte)},
-+	{"tx_q6_byte", EDMA_STAT(tx_q6_byte)},
-+	{"tx_q7_byte", EDMA_STAT(tx_q7_byte)},
-+	{"tx_q8_byte", EDMA_STAT(tx_q8_byte)},
-+	{"tx_q9_byte", EDMA_STAT(tx_q9_byte)},
-+	{"tx_q10_byte", EDMA_STAT(tx_q10_byte)},
-+	{"tx_q11_byte", EDMA_STAT(tx_q11_byte)},
-+	{"tx_q12_byte", EDMA_STAT(tx_q12_byte)},
-+	{"tx_q13_byte", EDMA_STAT(tx_q13_byte)},
-+	{"tx_q14_byte", EDMA_STAT(tx_q14_byte)},
-+	{"tx_q15_byte", EDMA_STAT(tx_q15_byte)},
-+	{"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)},
-+	{"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)},
-+	{"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)},
-+	{"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)},
-+	{"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)},
-+	{"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)},
-+	{"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)},
-+	{"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)},
-+	{"rx_q0_byte", EDMA_STAT(rx_q0_byte)},
-+	{"rx_q1_byte", EDMA_STAT(rx_q1_byte)},
-+	{"rx_q2_byte", EDMA_STAT(rx_q2_byte)},
-+	{"rx_q3_byte", EDMA_STAT(rx_q3_byte)},
-+	{"rx_q4_byte", EDMA_STAT(rx_q4_byte)},
-+	{"rx_q5_byte", EDMA_STAT(rx_q5_byte)},
-+	{"rx_q6_byte", EDMA_STAT(rx_q6_byte)},
-+	{"rx_q7_byte", EDMA_STAT(rx_q7_byte)},
-+	{"tx_desc_error", EDMA_STAT(tx_desc_error)},
-+};
-+
-+#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats)
-+
-+/* edma_get_strset_count()
-+ *	Get strset count
-+ */
-+static int edma_get_strset_count(struct net_device *netdev,
-+				 int sset)
-+{
-+	switch (sset) {
-+	case ETH_SS_STATS:
-+		return EDMA_STATS_LEN;
-+	default:
-+		netdev_dbg(netdev, "%s: Invalid string set", __func__);
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+
-+/* edma_get_strings()
-+ *	get stats string
-+ */
-+static void edma_get_strings(struct net_device *netdev, uint32_t stringset,
-+			     uint8_t *data)
-+{
-+	uint8_t *p = data;
-+	uint32_t i;
-+
-+	switch (stringset) {
-+	case ETH_SS_STATS:
-+		for (i = 0; i < EDMA_STATS_LEN; i++) {
-+			memcpy(p, edma_gstrings_stats[i].stat_string,
-+				min((size_t)ETH_GSTRING_LEN,
-+				    strlen(edma_gstrings_stats[i].stat_string)
-+				    + 1));
-+			p += ETH_GSTRING_LEN;
-+		}
-+		break;
-+	}
-+}
-+
-+/* edma_get_ethtool_stats()
-+ *	Get ethtool statistics
-+ */
-+static void edma_get_ethtool_stats(struct net_device *netdev,
-+				   struct ethtool_stats *stats, uint64_t *data)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+	struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+	int i;
-+	uint8_t *p = NULL;
-+
-+	edma_read_append_stats(edma_cinfo);
-+
-+	for(i = 0; i < EDMA_STATS_LEN; i++) {
-+		p = (uint8_t *)&(edma_cinfo->edma_ethstats) +
-+			edma_gstrings_stats[i].stat_offset;
-+		data[i] = *(uint32_t *)p;
-+	}
-+}
-+
-+/* edma_get_drvinfo()
-+ *	get edma driver info
-+ */
-+static void edma_get_drvinfo(struct net_device *dev,
-+			     struct ethtool_drvinfo *info)
-+{
-+	strlcpy(info->driver, "ess_edma", DRVINFO_LEN);
-+	strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN);
-+}
-+
-+/* edma_nway_reset()
-+ *	Reset the phy, if available.
-+ */
-+static int edma_nway_reset(struct net_device *netdev)
-+{
-+	return -EINVAL;
-+}
-+
-+/* edma_get_wol()
-+ *	get wake on lan info
-+ */
-+static void edma_get_wol(struct net_device *netdev,
-+			 struct ethtool_wolinfo *wol)
-+{
-+	wol->supported = 0;
-+	wol->wolopts = 0;
-+}
-+
-+/* edma_get_msglevel()
-+ *	get message level.
-+ */
-+static uint32_t edma_get_msglevel(struct net_device *netdev)
-+{
-+	return 0;
-+}
-+
-+/* edma_get_settings()
-+ *	Get edma settings
-+ */
-+static int edma_get_settings(struct net_device *netdev,
-+			     struct ethtool_cmd *ecmd)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+	if (adapter->poll_required) {
-+		struct phy_device *phydev = NULL;
-+		uint16_t phyreg;
-+
-+		if ((adapter->forced_speed != SPEED_UNKNOWN)
-+			&& !(adapter->poll_required))
-+			return -EPERM;
-+
-+		phydev = adapter->phydev;
-+
-+		ecmd->advertising = phydev->advertising;
-+		ecmd->autoneg = phydev->autoneg;
-+
-+		if (adapter->link_state == __EDMA_LINKDOWN) {
-+			ecmd->speed =  SPEED_UNKNOWN;
-+			ecmd->duplex = DUPLEX_UNKNOWN;
-+		} else {
-+			ecmd->speed = phydev->speed;
-+			ecmd->duplex = phydev->duplex;
-+		}
-+
-+		ecmd->phy_address = adapter->phy_mdio_addr;
-+
-+		phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA);
-+		if (phyreg & LPA_10HALF)
-+			ecmd->lp_advertising |= ADVERTISED_10baseT_Half;
-+
-+		if (phyreg & LPA_10FULL)
-+			ecmd->lp_advertising |= ADVERTISED_10baseT_Full;
-+
-+		if (phyreg & LPA_100HALF)
-+			ecmd->lp_advertising |= ADVERTISED_100baseT_Half;
-+
-+		if (phyreg & LPA_100FULL)
-+			ecmd->lp_advertising |= ADVERTISED_100baseT_Full;
-+
-+		phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000);
-+		if (phyreg & LPA_1000HALF)
-+			ecmd->lp_advertising |= ADVERTISED_1000baseT_Half;
-+
-+		if (phyreg & LPA_1000FULL)
-+			ecmd->lp_advertising |= ADVERTISED_1000baseT_Full;
-+	} else {
-+		/* If the speed/duplex for this GMAC is forced and we
-+		 * are not polling for link state changes, return the
-+		 * values as specified by platform. This will be true
-+		 * for GMACs connected to switch, and interfaces that
-+		 * do not use a PHY.
-+		 */
-+		if (!(adapter->poll_required)) {
-+			if (adapter->forced_speed != SPEED_UNKNOWN) {
-+				/* set speed and duplex */
-+				ethtool_cmd_speed_set(ecmd, SPEED_1000);
-+				ecmd->duplex = DUPLEX_FULL;
-+
-+				/* Populate capabilities advertised by self */
-+				ecmd->advertising = 0;
-+				ecmd->autoneg = 0;
-+				ecmd->port = PORT_TP;
-+				ecmd->transceiver = XCVR_EXTERNAL;
-+			} else {
-+				/* non link polled and non
-+				 * forced speed/duplex interface
-+				 */
-+				return -EIO;
-+			}
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/* edma_set_settings()
-+ *	Set EDMA settings
-+ */
-+static int edma_set_settings(struct net_device *netdev,
-+			     struct ethtool_cmd *ecmd)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+	struct phy_device *phydev = NULL;
-+
-+	if ((adapter->forced_speed != SPEED_UNKNOWN) &&
-+	     !adapter->poll_required)
-+		return -EPERM;
-+
-+	phydev = adapter->phydev;
-+	phydev->advertising = ecmd->advertising;
-+	phydev->autoneg = ecmd->autoneg;
-+	phydev->speed = ethtool_cmd_speed(ecmd);
-+	phydev->duplex = ecmd->duplex;
-+
-+	genphy_config_aneg(phydev);
-+
-+	return 0;
-+}
-+
-+/* edma_get_coalesce
-+ *	get interrupt mitigation
-+ */
-+static int edma_get_coalesce(struct net_device *netdev,
-+			     struct ethtool_coalesce *ec)
-+{
-+	u32 reg_val;
-+
-+	edma_get_tx_rx_coalesce(&reg_val);
-+
-+	/* We read the Interrupt Moderation Timer(IMT) register value,
-+	 * use lower 16 bit for rx and higher 16 bit for Tx. We do a
-+	 * left shift by 1, because IMT resolution timer is 2usecs.
-+	 * Hence the value given by the register is multiplied by 2 to
-+	 * get the actual time in usecs.
-+	 */
-+	ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1);
-+	ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1);
-+
-+	return 0;
-+}
-+
-+/* edma_set_coalesce
-+ *	set interrupt mitigation
-+ */
-+static int edma_set_coalesce(struct net_device *netdev,
-+			     struct ethtool_coalesce *ec)
-+{
-+	if (ec->tx_coalesce_usecs)
-+		edma_change_tx_coalesce(ec->tx_coalesce_usecs);
-+	if (ec->rx_coalesce_usecs)
-+		edma_change_rx_coalesce(ec->rx_coalesce_usecs);
-+
-+	return 0;
-+}
-+
-+/* edma_set_priv_flags()
-+ *	Set EDMA private flags
-+ */
-+static int edma_set_priv_flags(struct net_device *netdev, u32 flags)
-+{
-+	return 0;
-+}
-+
-+/* edma_get_priv_flags()
-+ *	get edma driver flags
-+ */
-+static u32 edma_get_priv_flags(struct net_device *netdev)
-+{
-+	return 0;
-+}
-+
-+/* edma_get_ringparam()
-+ *	get ring size
-+ */
-+static void edma_get_ringparam(struct net_device *netdev,
-+			       struct ethtool_ringparam *ring)
-+{
-+	struct edma_adapter *adapter = netdev_priv(netdev);
-+	struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+
-+	ring->tx_max_pending = edma_cinfo->tx_ring_count;
-+	ring->rx_max_pending = edma_cinfo->rx_ring_count;
-+}
-+
-+/* Ethtool operations
-+ */
-+static const struct ethtool_ops edma_ethtool_ops = {
-+	.get_drvinfo = &edma_get_drvinfo,
-+	.get_link = &ethtool_op_get_link,
-+	.get_msglevel = &edma_get_msglevel,
-+	.nway_reset = &edma_nway_reset,
-+	.get_wol = &edma_get_wol,
-+	.get_settings = &edma_get_settings,
-+	.set_settings = &edma_set_settings,
-+	.get_strings = &edma_get_strings,
-+	.get_sset_count = &edma_get_strset_count,
-+	.get_ethtool_stats = &edma_get_ethtool_stats,
-+	.get_coalesce = &edma_get_coalesce,
-+	.set_coalesce = &edma_set_coalesce,
-+	.get_priv_flags = edma_get_priv_flags,
-+	.set_priv_flags = edma_set_priv_flags,
-+	.get_ringparam = edma_get_ringparam,
-+};
-+
-+/* edma_set_ethtool_ops
-+ *	Set ethtool operations
-+ */
-+void edma_set_ethtool_ops(struct net_device *netdev)
-+{
-+	netdev->ethtool_ops = &edma_ethtool_ops;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
-@@ -0,0 +1,332 @@
-+/*
-+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#ifndef _ESS_EDMA_H_
-+#define _ESS_EDMA_H_
-+
-+#include <linux/types.h>
-+
-+struct edma_adapter;
-+struct edma_hw;
-+
-+/* register definition */
-+#define EDMA_REG_MAS_CTRL 0x0
-+#define EDMA_REG_TIMEOUT_CTRL 0x004
-+#define EDMA_REG_DBG0 0x008
-+#define EDMA_REG_DBG1 0x00C
-+#define EDMA_REG_SW_CTRL0 0x100
-+#define EDMA_REG_SW_CTRL1 0x104
-+
-+/* Interrupt Status Register */
-+#define EDMA_REG_RX_ISR 0x200
-+#define EDMA_REG_TX_ISR 0x208
-+#define EDMA_REG_MISC_ISR 0x210
-+#define EDMA_REG_WOL_ISR 0x218
-+
-+#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x)
-+
-+#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100
-+#define EDMA_MISC_ISR_AXIR_ERR 0x00000200
-+#define EDMA_MISC_ISR_TXF_DEAD 0x00000400
-+#define EDMA_MISC_ISR_AXIW_ERR 0x00000800
-+#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000
-+
-+#define EDMA_WOL_ISR 0x00000001
-+
-+/* Interrupt Mask Register */
-+#define EDMA_REG_MISC_IMR 0x214
-+#define EDMA_REG_WOL_IMR 0x218
-+
-+#define EDMA_RX_IMR_NORMAL_MASK 0x1
-+#define EDMA_TX_IMR_NORMAL_MASK 0x1
-+#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF
-+#define EDMA_WOL_IMR_NORMAL_MASK 0x1
-+
-+/* Edma receive consumer index */
-+#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */
-+/* Edma transmit consumer index */
-+#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */
-+
-+/* IRQ Moderator Initial Timer Register */
-+#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280
-+#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF
-+#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0
-+#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16
-+
-+/* Interrupt Control Register */
-+#define EDMA_REG_INTR_CTRL 0x284
-+#define EDMA_INTR_CLR_TYP_SHIFT 0
-+#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1
-+#define EDMA_INTR_CLEAR_TYPE_W1 0
-+#define EDMA_INTR_CLEAR_TYPE_R 1
-+
-+/* RX Interrupt Mask Register */
-+#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */
-+
-+/* TX Interrupt mask register */
-+#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */
-+
-+/* Load Ptr Register
-+ * Software sets this bit after the initialization of the head and tail
-+ */
-+#define EDMA_REG_TX_SRAM_PART 0x400
-+#define EDMA_LOAD_PTR_SHIFT 16
-+
-+/* TXQ Control Register */
-+#define EDMA_REG_TXQ_CTRL 0x404
-+#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10
-+#define EDMA_TXQ_CTRL_TXQ_EN 0x20
-+#define EDMA_TXQ_CTRL_ENH_MODE 0x40
-+#define EDMA_TXQ_CTRL_LS_8023_EN 0x80
-+#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100
-+#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200
-+#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF
-+#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF
-+#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0
-+#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16
-+
-+#define	EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */
-+#define EDMA_TXF_WATER_MARK_MASK 0x0FFF
-+#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0
-+#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16
-+#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000
-+
-+/* WRR Control Register */
-+#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c
-+#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410
-+#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414
-+#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418
-+
-+/* Weight round robin(WRR), it takes queue as input, and computes
-+ * starting bits where we need to write the weight for a particular
-+ * queue
-+ */
-+#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20)
-+
-+/* Tx Descriptor Control Register */
-+#define EDMA_REG_TPD_RING_SIZE 0x41C
-+#define EDMA_TPD_RING_SIZE_SHIFT 0
-+#define EDMA_TPD_RING_SIZE_MASK 0xFFFF
-+
-+/* Transmit descriptor base address */
-+#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */
-+
-+/* TPD Index Register */
-+#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */
-+
-+#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF
-+#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000
-+#define EDMA_TPD_PROD_IDX_MASK 0xFFFF
-+#define EDMA_TPD_CONS_IDX_MASK 0xFFFF
-+#define EDMA_TPD_PROD_IDX_SHIFT 0
-+#define EDMA_TPD_CONS_IDX_SHIFT 16
-+
-+/* TX Virtual Queue Mapping Control Register */
-+#define EDMA_REG_VQ_CTRL0 0x4A0
-+#define EDMA_REG_VQ_CTRL1 0x4A4
-+
-+/* Virtual QID shift, it takes queue as input, and computes
-+ * Virtual QID position in virtual qid control register
-+ */
-+#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24)
-+
-+/* Virtual Queue Default Value */
-+#define EDMA_VQ_REG_VALUE 0x240240
-+
-+/* Tx side Port Interface Control Register */
-+#define EDMA_REG_PORT_CTRL 0x4A8
-+#define EDMA_PAD_EN_SHIFT 15
-+
-+/* Tx side VLAN Configuration Register */
-+#define EDMA_REG_VLAN_CFG 0x4AC
-+
-+#define EDMA_TX_CVLAN 16
-+#define EDMA_TX_INS_CVLAN 17
-+#define EDMA_TX_CVLAN_TAG_SHIFT 0
-+
-+#define EDMA_TX_SVLAN 14
-+#define EDMA_TX_INS_SVLAN 15
-+#define EDMA_TX_SVLAN_TAG_SHIFT 16
-+
-+/* Tx Queue Packet Statistic Register */
-+#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */
-+
-+#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF
-+
-+/* Tx Queue Byte Statistic Register */
-+#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */
-+
-+/* Load Balance Based Ring Offset Register */
-+#define EDMA_REG_LB_RING 0x800
-+#define EDMA_LB_RING_ENTRY_MASK 0xff
-+#define EDMA_LB_RING_ID_MASK 0x7
-+#define EDMA_LB_RING_PROFILE_ID_MASK 0x3
-+#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8
-+#define EDMA_LB_RING_ID_OFFSET 0
-+#define EDMA_LB_RING_PROFILE_ID_OFFSET 3
-+#define EDMA_LB_REG_VALUE 0x6040200
-+
-+/* Load Balance Priority Mapping Register */
-+#define EDMA_REG_LB_PRI_START 0x804
-+#define EDMA_REG_LB_PRI_END 0x810
-+#define EDMA_LB_PRI_REG_INC 4
-+#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4
-+#define EDMA_LB_PRI_ENTRY_MASK 0xf
-+
-+/* RSS Priority Mapping Register */
-+#define EDMA_REG_RSS_PRI 0x820
-+#define EDMA_RSS_PRI_ENTRY_MASK 0xf
-+#define EDMA_RSS_RING_ID_MASK 0x7
-+#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4
-+
-+/* RSS Indirection Register */
-+#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */
-+#define EDMA_NUM_IDT 16
-+#define EDMA_RSS_IDT_VALUE 0x64206420
-+
-+/* Default RSS Ring Register */
-+#define EDMA_REG_DEF_RSS 0x890
-+#define EDMA_DEF_RSS_MASK 0x7
-+
-+/* RSS Hash Function Type Register */
-+#define EDMA_REG_RSS_TYPE 0x894
-+#define EDMA_RSS_TYPE_NONE 0x01
-+#define EDMA_RSS_TYPE_IPV4TCP 0x02
-+#define EDMA_RSS_TYPE_IPV6_TCP 0x04
-+#define EDMA_RSS_TYPE_IPV4_UDP 0x08
-+#define EDMA_RSS_TYPE_IPV6UDP 0x10
-+#define EDMA_RSS_TYPE_IPV4 0x20
-+#define EDMA_RSS_TYPE_IPV6 0x40
-+#define EDMA_RSS_HASH_MODE_MASK 0x7f
-+
-+#define EDMA_REG_RSS_HASH_VALUE 0x8C0
-+
-+#define EDMA_REG_RSS_TYPE_RESULT 0x8C4
-+
-+#define EDMA_HASH_TYPE_START 0
-+#define EDMA_HASH_TYPE_END 5
-+#define EDMA_HASH_TYPE_SHIFT 12
-+
-+#define EDMA_RFS_FLOW_ENTRIES 1024
-+#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1)
-+#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128
-+
-+/* RFD Base Address Register */
-+#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */
-+
-+/* RFD Index Register */
-+#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2))
-+
-+#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF
-+#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000
-+#define EDMA_RFD_PROD_IDX_MASK 0xFFF
-+#define EDMA_RFD_CONS_IDX_MASK 0xFFF
-+#define EDMA_RFD_PROD_IDX_SHIFT 0
-+#define EDMA_RFD_CONS_IDX_SHIFT 16
-+
-+/* Rx Descriptor Control Register */
-+#define EDMA_REG_RX_DESC0 0xA10
-+#define EDMA_RFD_RING_SIZE_MASK 0xFFF
-+#define EDMA_RX_BUF_SIZE_MASK 0xFFFF
-+#define EDMA_RFD_RING_SIZE_SHIFT 0
-+#define EDMA_RX_BUF_SIZE_SHIFT 16
-+
-+#define EDMA_REG_RX_DESC1 0xA14
-+#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F
-+#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F
-+#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF
-+#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0
-+#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8
-+#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16
-+
-+/* RXQ Control Register */
-+#define EDMA_REG_RXQ_CTRL 0xA18
-+#define EDMA_FIFO_THRESH_TYPE_SHIF 0
-+#define EDMA_FIFO_THRESH_128_BYTE 0x0
-+#define EDMA_FIFO_THRESH_64_BYTE 0x1
-+#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002
-+#define EDMA_RXQ_CTRL_EN 0x0000FF00
-+
-+/* AXI Burst Size Config */
-+#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C
-+#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0
-+
-+/* Rx Statistics Register */
-+#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */
-+#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */
-+
-+/* WoL Pattern Length Register */
-+#define EDMA_REG_WOL_PATTERN_LEN0 0xC00
-+#define EDMA_WOL_PT_LEN_MASK 0xFF
-+#define EDMA_WOL_PT0_LEN_SHIFT 0
-+#define EDMA_WOL_PT1_LEN_SHIFT 8
-+#define EDMA_WOL_PT2_LEN_SHIFT 16
-+#define EDMA_WOL_PT3_LEN_SHIFT 24
-+
-+#define EDMA_REG_WOL_PATTERN_LEN1 0xC04
-+#define EDMA_WOL_PT4_LEN_SHIFT 0
-+#define EDMA_WOL_PT5_LEN_SHIFT 8
-+#define EDMA_WOL_PT6_LEN_SHIFT 16
-+
-+/* WoL Control Register */
-+#define EDMA_REG_WOL_CTRL 0xC08
-+#define EDMA_WOL_WK_EN 0x00000001
-+#define EDMA_WOL_MG_EN 0x00000002
-+#define EDMA_WOL_PT0_EN 0x00000004
-+#define EDMA_WOL_PT1_EN 0x00000008
-+#define EDMA_WOL_PT2_EN 0x00000010
-+#define EDMA_WOL_PT3_EN 0x00000020
-+#define EDMA_WOL_PT4_EN 0x00000040
-+#define EDMA_WOL_PT5_EN 0x00000080
-+#define EDMA_WOL_PT6_EN 0x00000100
-+
-+/* MAC Control Register */
-+#define EDMA_REG_MAC_CTRL0 0xC20
-+#define EDMA_REG_MAC_CTRL1 0xC24
-+
-+/* WoL Pattern Register */
-+#define EDMA_REG_WOL_PATTERN_START 0x5000
-+#define EDMA_PATTERN_PART_REG_OFFSET 0x40
-+
-+
-+/* TX descriptor fields */
-+#define EDMA_TPD_HDR_SHIFT 0
-+#define EDMA_TPD_PPPOE_EN 0x00000100
-+#define EDMA_TPD_IP_CSUM_EN 0x00000200
-+#define EDMA_TPD_TCP_CSUM_EN 0x0000400
-+#define EDMA_TPD_UDP_CSUM_EN 0x00000800
-+#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00
-+#define EDMA_TPD_LSO_EN 0x00001000
-+#define EDMA_TPD_LSO_V2_EN 0x00002000
-+#define EDMA_TPD_IPV4_EN 0x00010000
-+#define EDMA_TPD_MSS_MASK 0x1FFF
-+#define EDMA_TPD_MSS_SHIFT 18
-+#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18
-+
-+/* RRD descriptor fields */
-+#define EDMA_RRD_NUM_RFD_MASK 0x000F
-+#define EDMA_RRD_SVLAN 0x8000
-+#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF;
-+
-+#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF
-+#define EDMA_RRD_CSUM_FAIL_MASK 0xC000
-+#define EDMA_RRD_CVLAN 0x0001
-+#define EDMA_RRD_DESC_VALID 0x8000
-+
-+#define EDMA_RRD_PRIORITY_SHIFT 4
-+#define EDMA_RRD_PRIORITY_MASK 0x7
-+#define EDMA_RRD_PORT_TYPE_SHIFT 7
-+#define EDMA_RRD_PORT_TYPE_MASK 0x1F
-+#endif /* _ESS_EDMA_H_ */
diff --git a/target/linux/ipq40xx/patches-4.19/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-4.19/711-dts-ipq4019-add-ethernet-essedma-node.patch
deleted file mode 100644
index 7302d237bc..0000000000
--- a/target/linux/ipq40xx/patches-4.19/711-dts-ipq4019-add-ethernet-essedma-node.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:01:10 +0100
-Subject: [PATCH] dts: ipq4019: add ethernet essedma node
-
-This patch adds the device-tree node for the ethernet
-interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -44,6 +44,8 @@
- 		spi1 = &blsp1_spi2;
- 		i2c0 = &blsp1_i2c3;
- 		i2c1 = &blsp1_i2c4;
-+		ethernet0 = &gmac0;
-+		ethernet1 = &gmac1;
- 	};
- 
- 	cpus {
-@@ -617,6 +619,64 @@
- 			status = "disabled";
- 		};
- 
-+		edma@c080000 {
-+			compatible = "qcom,ess-edma";
-+			reg = <0xc080000 0x8000>;
-+			qcom,page-mode = <0>;
-+			qcom,rx_head_buf_size = <1540>;
-+			qcom,mdio_supported;
-+			qcom,poll_required = <1>;
-+			qcom,num_gmac = <2>;
-+			interrupts = <0  65 IRQ_TYPE_EDGE_RISING
-+				      0  66 IRQ_TYPE_EDGE_RISING
-+				      0  67 IRQ_TYPE_EDGE_RISING
-+				      0  68 IRQ_TYPE_EDGE_RISING
-+				      0  69 IRQ_TYPE_EDGE_RISING
-+				      0  70 IRQ_TYPE_EDGE_RISING
-+				      0  71 IRQ_TYPE_EDGE_RISING
-+				      0  72 IRQ_TYPE_EDGE_RISING
-+				      0  73 IRQ_TYPE_EDGE_RISING
-+				      0  74 IRQ_TYPE_EDGE_RISING
-+				      0  75 IRQ_TYPE_EDGE_RISING
-+				      0  76 IRQ_TYPE_EDGE_RISING
-+				      0  77 IRQ_TYPE_EDGE_RISING
-+				      0  78 IRQ_TYPE_EDGE_RISING
-+				      0  79 IRQ_TYPE_EDGE_RISING
-+				      0  80 IRQ_TYPE_EDGE_RISING
-+				      0 240 IRQ_TYPE_EDGE_RISING
-+				      0 241 IRQ_TYPE_EDGE_RISING
-+				      0 242 IRQ_TYPE_EDGE_RISING
-+				      0 243 IRQ_TYPE_EDGE_RISING
-+				      0 244 IRQ_TYPE_EDGE_RISING
-+				      0 245 IRQ_TYPE_EDGE_RISING
-+				      0 246 IRQ_TYPE_EDGE_RISING
-+				      0 247 IRQ_TYPE_EDGE_RISING
-+				      0 248 IRQ_TYPE_EDGE_RISING
-+				      0 249 IRQ_TYPE_EDGE_RISING
-+				      0 250 IRQ_TYPE_EDGE_RISING
-+				      0 251 IRQ_TYPE_EDGE_RISING
-+				      0 252 IRQ_TYPE_EDGE_RISING
-+				      0 253 IRQ_TYPE_EDGE_RISING
-+				      0 254 IRQ_TYPE_EDGE_RISING
-+				      0 255 IRQ_TYPE_EDGE_RISING>;
-+
-+			status = "disabled";
-+
-+			gmac0: gmac0 {
-+				local-mac-address = [00 00 00 00 00 00];
-+				vlan_tag = <1 0x1f>;
-+			};
-+
-+			gmac1: gmac1 {
-+				local-mac-address = [00 00 00 00 00 00];
-+				qcom,phy_mdio_addr = <4>;
-+				qcom,poll_required = <1>;
-+				qcom,forced_speed = <1000>;
-+				qcom,forced_duplex = <1>;
-+				vlan_tag = <2 0x20>;
-+			};
-+		};
-+
- 		usb3_ss_phy: ssphy@9a000 {
- 			compatible = "qcom,usb-ss-ipq4019-phy";
- 			#phy-cells = <0>;
diff --git a/target/linux/ipq40xx/patches-4.19/712-mr33-essedma.patch b/target/linux/ipq40xx/patches-4.19/712-mr33-essedma.patch
deleted file mode 100644
index ee6452eebb..0000000000
--- a/target/linux/ipq40xx/patches-4.19/712-mr33-essedma.patch
+++ /dev/null
@@ -1,334 +0,0 @@
---- a/drivers/net/ethernet/qualcomm/essedma/edma.c
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
-@@ -161,8 +161,10 @@ static void edma_configure_rx(struct edm
- 	/* Set Rx FIFO threshold to start to DMA data to host */
- 	rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
- 
-+	if (!edma_cinfo->is_single_phy) {
- 	/* Set RX remove vlan bit */
- 	rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
-+	}
- 
- 	edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
- }
-@@ -1293,6 +1295,10 @@ void edma_adjust_link(struct net_device
- 	if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
- 		dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed);
- 		adapter->link_state = __EDMA_LINKUP;
-+		if (adapter->edma_cinfo->is_single_phy) {
-+			ess_set_port_status_speed(adapter->edma_cinfo, phydev,
-+						  ffs(adapter->dp_bitmap) - 1);
-+		}
- 		netif_carrier_on(netdev);
- 		if (netif_running(netdev))
- 			netif_tx_wake_all_queues(netdev);
-@@ -1386,10 +1392,12 @@ netdev_tx_t edma_xmit(struct sk_buff *sk
- 	}
- 
- 	/* Check and mark VLAN tag offload */
--	if (skb_vlan_tag_present(skb))
--		flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
--	else if (adapter->default_vlan_tag)
--		flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
-+	if (!adapter->edma_cinfo->is_single_phy) {
-+		if (unlikely(skb_vlan_tag_present(skb)))
-+			flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
-+		else if (adapter->default_vlan_tag)
-+			flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
-+	}
- 
- 	/* Check and mark checksum offload */
- 	if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
---- a/drivers/net/ethernet/qualcomm/essedma/edma.h
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
-@@ -31,6 +31,7 @@
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-+#include <linux/clk.h>
- #include <linux/kernel.h>
- #include <linux/device.h>
- #include <linux/sysctl.h>
-@@ -332,6 +333,9 @@ struct edma_common_info {
- 	struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
- 	spinlock_t stats_lock; /* protect edma stats area for updation */
- 	struct timer_list edma_stats_timer;
-+	bool is_single_phy;
-+	void __iomem *ess_hw_addr;
-+	struct clk *ess_clk;
- };
- 
- /* transimit packet descriptor (tpd) ring */
-@@ -444,4 +448,6 @@ void edma_change_tx_coalesce(int usecs);
- void edma_change_rx_coalesce(int usecs);
- void edma_get_tx_rx_coalesce(u32 *reg_val);
- void edma_clear_irq_status(void);
-+void ess_set_port_status_speed(struct edma_common_info *edma_cinfo,
-+                               struct phy_device *phydev, uint8_t port_id);
- #endif /* _EDMA_H_ */
---- a/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
-@@ -17,6 +17,11 @@
- #include <linux/of.h>
- #include <linux/of_net.h>
- #include <linux/timer.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_address.h>
-+#include <linux/clk.h>
-+#include <linux/string.h>
-+#include <linux/reset.h>
- #include "edma.h"
- #include "ess_edma.h"
- 
-@@ -81,6 +86,101 @@ void edma_read_reg(u16 reg_addr, volatil
- 	*reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
- }
- 
-+static void ess_write_reg(struct edma_common_info *edma, u16 reg_addr, u32 reg_value)
-+{
-+	writel(reg_value, ((void __iomem *)
-+		((unsigned long)edma->ess_hw_addr + reg_addr)));
-+}
-+
-+static void ess_read_reg(struct edma_common_info *edma, u16 reg_addr,
-+		  volatile u32 *reg_value)
-+{
-+	*reg_value = readl((void __iomem *)
-+		((unsigned long)edma->ess_hw_addr + reg_addr));
-+}
-+
-+static int ess_reset(struct edma_common_info *edma)
-+{
-+	struct device_node *switch_node = NULL;
-+	struct reset_control *ess_rst;
-+	u32 regval;
-+
-+	switch_node = of_find_node_by_name(NULL, "ess-switch");
-+	if (!switch_node) {
-+		pr_err("switch-node not found\n");
-+		return -EINVAL;
-+	}
-+
-+	ess_rst = of_reset_control_get(switch_node, "ess_rst");
-+	of_node_put(switch_node);
-+
-+	if (IS_ERR(ess_rst)) {
-+		pr_err("failed to find ess_rst!\n");
-+		return -ENOENT;
-+	}
-+
-+	reset_control_assert(ess_rst);
-+	msleep(10);
-+	reset_control_deassert(ess_rst);
-+	msleep(100);
-+	reset_control_put(ess_rst);
-+
-+	/* Enable only port 5 <--> port 0
-+	 * bits 0:6 bitmap of ports it can fwd to */
-+#define SET_PORT_BMP(r,v) \
-+		ess_read_reg(edma, r, &regval); \
-+		ess_write_reg(edma, r, ((regval & ~0x3F) | v));
-+
-+	SET_PORT_BMP(ESS_PORT0_LOOKUP_CTRL,0x20);
-+	SET_PORT_BMP(ESS_PORT1_LOOKUP_CTRL,0x00);
-+	SET_PORT_BMP(ESS_PORT2_LOOKUP_CTRL,0x00);
-+	SET_PORT_BMP(ESS_PORT3_LOOKUP_CTRL,0x00);
-+	SET_PORT_BMP(ESS_PORT4_LOOKUP_CTRL,0x00);
-+	SET_PORT_BMP(ESS_PORT5_LOOKUP_CTRL,0x01);
-+	ess_write_reg(edma, ESS_RGMII_CTRL, 0x400);
-+	ess_write_reg(edma, ESS_PORT0_STATUS, ESS_PORT_1G_FDX);
-+	ess_write_reg(edma, ESS_PORT5_STATUS, ESS_PORT_1G_FDX);
-+	ess_write_reg(edma, ESS_PORT0_HEADER_CTRL, 0);
-+#undef SET_PORT_BMP
-+
-+	/* forward multicast and broadcast frames to CPU */
-+	ess_write_reg(edma, ESS_FWD_CTRL1,
-+		(ESS_PORTS_ALL << ESS_FWD_CTRL1_UC_FLOOD_S) |
-+		(ESS_PORTS_ALL << ESS_FWD_CTRL1_MC_FLOOD_S) |
-+		(ESS_PORTS_ALL << ESS_FWD_CTRL1_BC_FLOOD_S));
-+
-+	return 0;
-+}
-+
-+void ess_set_port_status_speed(struct edma_common_info *edma,
-+			       struct phy_device *phydev, uint8_t port_id)
-+{
-+	uint16_t reg_off = ESS_PORT0_STATUS + (4 * port_id);
-+	uint32_t reg_val = 0;
-+
-+	ess_read_reg(edma, reg_off, &reg_val);
-+
-+	/* reset the speed bits [0:1] */
-+	reg_val &= ~ESS_PORT_STATUS_SPEED_INV;
-+
-+	/* set the new speed */
-+	switch(phydev->speed) {
-+		case SPEED_1000:  reg_val |= ESS_PORT_STATUS_SPEED_1000; break;
-+		case SPEED_100:   reg_val |= ESS_PORT_STATUS_SPEED_100;  break;
-+		case SPEED_10:    reg_val |= ESS_PORT_STATUS_SPEED_10;   break;
-+		default:          reg_val |= ESS_PORT_STATUS_SPEED_INV;  break;
-+	}
-+
-+	/* check full/half duplex */
-+	if (phydev->duplex) {
-+		reg_val |= ESS_PORT_STATUS_DUPLEX_MODE;
-+	} else {
-+		reg_val &= ~ESS_PORT_STATUS_DUPLEX_MODE;
-+	}
-+
-+	ess_write_reg(edma, reg_off, reg_val);
-+}
-+
- /* edma_change_tx_coalesce()
-  *	change tx interrupt moderation timer
-  */
-@@ -550,6 +650,31 @@ static struct ctl_table edma_table[] = {
- 	{}
- };
- 
-+static int ess_parse(struct edma_common_info *edma)
-+{
-+	struct device_node *switch_node;
-+	int ret = -EINVAL;
-+
-+	switch_node = of_find_node_by_name(NULL, "ess-switch");
-+	if (!switch_node) {
-+		pr_err("cannot find ess-switch node\n");
-+		goto out;
-+	}
-+
-+	edma->ess_hw_addr = of_io_request_and_map(switch_node,
-+						  0, KBUILD_MODNAME);
-+	if (!edma->ess_hw_addr) {
-+		pr_err("%s ioremap fail.", __func__);
-+		goto out;
-+	}
-+
-+	edma->ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
-+	ret = clk_prepare_enable(edma->ess_clk);
-+out:
-+	of_node_put(switch_node);
-+	return ret;
-+}
-+
- /* edma_axi_netdev_ops
-  *	Describe the operations supported by registered netdevices
-  *
-@@ -785,6 +910,17 @@ static int edma_axi_probe(struct platfor
- 		miibus = mdio_data->mii_bus;
- 	}
- 
-+	if (of_property_read_bool(np, "qcom,single-phy") &&
-+	    edma_cinfo->num_gmac == 1) {
-+		err = ess_parse(edma_cinfo);
-+		if (!err)
-+			err = ess_reset(edma_cinfo);
-+		if (err)
-+			goto err_single_phy_init;
-+		else
-+			edma_cinfo->is_single_phy = true;
-+	}
-+
- 	for_each_available_child_of_node(np, pnp) {
- 		const char *mac_addr;
- 
-@@ -1073,11 +1209,15 @@ static int edma_axi_probe(struct platfor
- 
- 	for (i = 0; i < edma_cinfo->num_gmac; i++) {
- 		if (adapter[i]->poll_required) {
-+			int phy_mode = of_get_phy_mode(np);
-+
-+			if (phy_mode < 0)
-+				phy_mode = PHY_INTERFACE_MODE_SGMII;
- 			adapter[i]->phydev =
- 				phy_connect(edma_netdev[i],
- 					    (const char *)adapter[i]->phy_id,
- 					    &edma_adjust_link,
--					    PHY_INTERFACE_MODE_SGMII);
-+					    phy_mode);
- 			if (IS_ERR(adapter[i]->phydev)) {
- 				dev_dbg(&pdev->dev, "PHY attach FAIL");
- 				err = -EIO;
-@@ -1121,6 +1261,9 @@ err_rmap_alloc_fail:
- 	for (i = 0; i < edma_cinfo->num_gmac; i++)
- 		unregister_netdev(edma_netdev[i]);
- err_register:
-+err_single_phy_init:
-+	iounmap(edma_cinfo->ess_hw_addr);
-+	clk_disable_unprepare(edma_cinfo->ess_clk);
- err_mdiobus_init_fail:
- 	edma_free_rx_rings(edma_cinfo);
- err_rx_rinit:
-@@ -1181,6 +1324,8 @@ static int edma_axi_remove(struct platfo
- 	del_timer_sync(&edma_cinfo->edma_stats_timer);
- 	edma_free_irqs(adapter);
- 	unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
-+	iounmap(edma_cinfo->ess_hw_addr);
-+	clk_disable_unprepare(edma_cinfo->ess_clk);
- 	edma_free_tx_resources(edma_cinfo);
- 	edma_free_rx_resources(edma_cinfo);
- 	edma_free_tx_rings(edma_cinfo);
---- a/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
-+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
-@@ -329,4 +329,61 @@ struct edma_hw;
- #define EDMA_RRD_PRIORITY_MASK 0x7
- #define EDMA_RRD_PORT_TYPE_SHIFT 7
- #define EDMA_RRD_PORT_TYPE_MASK 0x1F
-+
-+#define ESS_RGMII_CTRL		0x0004
-+
-+/* Port status registers */
-+#define ESS_PORT0_STATUS	0x007C
-+#define ESS_PORT1_STATUS	0x0080
-+#define ESS_PORT2_STATUS	0x0084
-+#define ESS_PORT3_STATUS	0x0088
-+#define ESS_PORT4_STATUS	0x008C
-+#define ESS_PORT5_STATUS	0x0090
-+
-+#define ESS_PORT_STATUS_HDX_FLOW_CTL	0x80
-+#define ESS_PORT_STATUS_DUPLEX_MODE	0x40
-+#define ESS_PORT_STATUS_RX_FLOW_EN	0x20
-+#define ESS_PORT_STATUS_TX_FLOW_EN	0x10
-+#define ESS_PORT_STATUS_RX_MAC_EN	0x08
-+#define ESS_PORT_STATUS_TX_MAC_EN	0x04
-+#define ESS_PORT_STATUS_SPEED_INV	0x03
-+#define ESS_PORT_STATUS_SPEED_1000	0x02
-+#define ESS_PORT_STATUS_SPEED_100	0x01
-+#define ESS_PORT_STATUS_SPEED_10	0x00
-+
-+#define ESS_PORT_1G_FDX      (ESS_PORT_STATUS_DUPLEX_MODE | ESS_PORT_STATUS_RX_FLOW_EN | \
-+			       ESS_PORT_STATUS_TX_FLOW_EN  | ESS_PORT_STATUS_RX_MAC_EN  | \
-+			       ESS_PORT_STATUS_TX_MAC_EN   | ESS_PORT_STATUS_SPEED_1000)
-+
-+#define PHY_STATUS_REG			0x11
-+#define PHY_STATUS_SPEED		0xC000
-+#define PHY_STATUS_SPEED_SHIFT		14
-+#define PHY_STATUS_DUPLEX		0x2000
-+#define PHY_STATUS_DUPLEX_SHIFT	13
-+#define PHY_STATUS_SPEED_DUPLEX_RESOLVED 0x0800
-+#define PHY_STATUS_CARRIER		0x0400
-+#define PHY_STATUS_CARRIER_SHIFT	10
-+
-+/* Port lookup control registers */
-+#define ESS_PORT0_LOOKUP_CTRL	0x0660
-+#define ESS_PORT1_LOOKUP_CTRL	0x066C
-+#define ESS_PORT2_LOOKUP_CTRL	0x0678
-+#define ESS_PORT3_LOOKUP_CTRL	0x0684
-+#define ESS_PORT4_LOOKUP_CTRL	0x0690
-+#define ESS_PORT5_LOOKUP_CTRL	0x069C
-+
-+#define ESS_PORT0_HEADER_CTRL	0x009C
-+
-+#define ESS_PORTS_ALL		0x3f
-+
-+#define ESS_FWD_CTRL1		0x0624
-+#define   ESS_FWD_CTRL1_UC_FLOOD		BITS(0, 7)
-+#define   ESS_FWD_CTRL1_UC_FLOOD_S		0
-+#define   ESS_FWD_CTRL1_MC_FLOOD		BITS(8, 7)
-+#define   ESS_FWD_CTRL1_MC_FLOOD_S		8
-+#define   ESS_FWD_CTRL1_BC_FLOOD		BITS(16, 7)
-+#define   ESS_FWD_CTRL1_BC_FLOOD_S		16
-+#define   ESS_FWD_CTRL1_IGMP			BITS(24, 7)
-+#define   ESS_FWD_CTRL1_IGMP_S			24
-+
- #endif /* _ESS_EDMA_H_ */
diff --git a/target/linux/ipq40xx/patches-4.19/713-essedma-alloc-skb-ip-align.patch b/target/linux/ipq40xx/patches-4.19/713-essedma-alloc-skb-ip-align.patch
deleted file mode 100644
index 8c70fceb01..0000000000
--- a/target/linux/ipq40xx/patches-4.19/713-essedma-alloc-skb-ip-align.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 17681f0bb474d0d227f07369144149d1555d8bce Mon Sep 17 00:00:00 2001
-From: Chen Minqiang <ptpt52@gmail.com>
-Date: Sun, 17 Jun 2018 04:14:13 +0800
-Subject: [PATCH] essedma: alloc skb ip align
-
-Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
----
- drivers/net/ethernet/qualcomm/essedma/edma.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/qualcomm/essedma/edma.c
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
-@@ -201,7 +201,7 @@ static int edma_alloc_rx_buf(struct edma
- 			skb = sw_desc->skb;
- 		} else {
- 			/* alloc skb */
--			skb = netdev_alloc_skb(edma_netdev[0], length);
-+			skb = netdev_alloc_skb_ip_align(edma_netdev[0], length);
- 			if (!skb) {
- 				/* Better luck next round */
- 				break;
diff --git a/target/linux/ipq40xx/patches-4.19/714-essedma-add-fix-for-memory-allocation.patch b/target/linux/ipq40xx/patches-4.19/714-essedma-add-fix-for-memory-allocation.patch
deleted file mode 100644
index 5b9fcf780c..0000000000
--- a/target/linux/ipq40xx/patches-4.19/714-essedma-add-fix-for-memory-allocation.patch
+++ /dev/null
@@ -1,197 +0,0 @@
-From 72c050acbc425ef99313d5c2e4c866e25567e569 Mon Sep 17 00:00:00 2001
-From: Rakesh Nair <ranair@codeaurora.org>
-Date: Thu, 8 Jun 2017 14:29:20 +0530
-Subject: [PATCH] CHROMIUM: net: qualcomm: Add fix for memory allocation issues
-
-Added ethtool counters for memory allocation failures accounting.
-Added support to track number of allocation failures that could
-not be fulfilled in the current iteration in the rx descriptor
-field and use the info to allocate in the subsequent iteration.
-
-Change-Id: Ie4fd3b6cf25304e5db2c9247a498791e7e9bb4aa
-Signed-off-by: Rakesh Nair <ranair@codeaurora.org>
-Signed-off-by: Kan Yan <kyan@google.com>
-Reviewed-on: https://chromium-review.googlesource.com/535419
-Reviewed-by: Grant Grundler <grundler@chromium.org>
----
- drivers/net/ethernet/qualcomm/essedma/edma.c  | 54 ++++++++++++++-----
- drivers/net/ethernet/qualcomm/essedma/edma.h  |  2 +
- .../ethernet/qualcomm/essedma/edma_ethtool.c  |  1 +
- 3 files changed, 43 insertions(+), 14 deletions(-)
-
---- a/drivers/net/ethernet/qualcomm/essedma/edma.c
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
-@@ -103,6 +103,9 @@ static int edma_alloc_rx_ring(struct edm
- 		return -ENOMEM;
- 	}
- 
-+	/* Initialize pending_fill */
-+	erxd->pending_fill = 0;
-+
- 	return 0;
- }
- 
-@@ -185,11 +188,8 @@ static int edma_alloc_rx_buf(struct edma
- 	u16 prod_idx, length;
- 	u32 reg_data;
- 
--	if (cleaned_count > erdr->count) {
--		dev_err(&pdev->dev, "Incorrect cleaned_count %d",
--		       cleaned_count);
--		return -1;
--	}
-+	if (cleaned_count > erdr->count)
-+		cleaned_count = erdr->count - 1;
- 
- 	i = erdr->sw_next_to_fill;
- 
-@@ -199,6 +199,9 @@ static int edma_alloc_rx_buf(struct edma
- 
- 		if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
- 			skb = sw_desc->skb;
-+
-+			/* Clear REUSE Flag */
-+			sw_desc->flags &= ~EDMA_SW_DESC_FLAG_SKB_REUSE;
- 		} else {
- 			/* alloc skb */
- 			skb = netdev_alloc_skb_ip_align(edma_netdev[0], length);
-@@ -264,6 +267,13 @@ static int edma_alloc_rx_buf(struct edma
- 	reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
- 	reg_data |= prod_idx;
- 	edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
-+
-+	/* If we couldn't allocate all the buffers
-+	 * we increment the alloc failure counters
-+	 */
-+	if (cleaned_count)
-+		edma_cinfo->edma_ethstats.rx_alloc_fail_ctr++;
-+
- 	return cleaned_count;
- }
- 
-@@ -534,7 +544,7 @@ static int edma_rx_complete_paged(struct
-  * edma_rx_complete()
-  *	Main api called from the poll function to process rx packets.
-  */
--static void edma_rx_complete(struct edma_common_info *edma_cinfo,
-+static u16 edma_rx_complete(struct edma_common_info *edma_cinfo,
- 			    int *work_done, int work_to_do, int queue_id,
- 			    struct napi_struct *napi)
- {
-@@ -554,6 +564,7 @@ static void edma_rx_complete(struct edma
- 	u16 count = erdr->count, rfd_avail;
- 	u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
- 
-+	cleaned_count = erdr->pending_fill;
- 	sw_next_to_clean = erdr->sw_next_to_clean;
- 
- 	edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
-@@ -652,12 +663,13 @@ static void edma_rx_complete(struct edma
- 						(*work_done)++;
- 						drop_count = 0;
- 					}
--					if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
-+					if (cleaned_count >= EDMA_RX_BUFFER_WRITE) {
- 						/* If buffer clean count reaches 16, we replenish HW buffers. */
- 						ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- 						edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- 							      sw_next_to_clean);
- 						cleaned_count = ret_count;
-+						erdr->pending_fill = ret_count;
- 					}
- 					continue;
- 				}
-@@ -730,11 +742,12 @@ static void edma_rx_complete(struct edma
- 			adapter->stats.rx_bytes += length;
- 
- 			/* Check if we reached refill threshold */
--			if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
-+			if (cleaned_count >= EDMA_RX_BUFFER_WRITE) {
- 				ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- 				edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- 					      sw_next_to_clean);
- 				cleaned_count = ret_count;
-+				erdr->pending_fill = ret_count;
- 			}
- 
- 			/* At this point skb should go to stack */
-@@ -756,11 +769,17 @@ static void edma_rx_complete(struct edma
- 	/* Refill here in case refill threshold wasn't reached */
- 	if (likely(cleaned_count)) {
- 		ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
--		if (ret_count)
--			dev_dbg(&pdev->dev, "Not all buffers was reallocated");
-+		erdr->pending_fill = ret_count;
-+		if (ret_count) {
-+			if (net_ratelimit())
-+				dev_dbg(&pdev->dev, "Not all buffers was reallocated");
-+		}
-+
- 		edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- 			      erdr->sw_next_to_clean);
- 	}
-+
-+	return erdr->pending_fill;
- }
- 
- /* edma_delete_rfs_filter()
-@@ -2064,6 +2083,7 @@ int edma_poll(struct napi_struct *napi,
- 	u32 shadow_rx_status, shadow_tx_status;
- 	int queue_id;
- 	int i, work_done = 0;
-+	u16 rx_pending_fill;
- 
- 	/* Store the Rx/Tx status by ANDing it with
- 	 * appropriate CPU RX?TX mask
-@@ -2097,13 +2117,19 @@ int edma_poll(struct napi_struct *napi,
- 	 */
- 	while (edma_percpu_info->rx_status) {
- 		queue_id = ffs(edma_percpu_info->rx_status) - 1;
--		edma_rx_complete(edma_cinfo, &work_done,
--			        budget, queue_id, napi);
-+		rx_pending_fill = edma_rx_complete(edma_cinfo, &work_done,
-+						   budget, queue_id, napi);
- 
--		if (likely(work_done < budget))
-+		if (likely(work_done < budget)) {
-+			if (rx_pending_fill) {
-+                          	/* reschedule poll() to refill rx buffer deficit */
-+				work_done = budget;
-+				break;
-+			}
- 			edma_percpu_info->rx_status &= ~(1 << queue_id);
--		else
-+		} else {
- 			break;
-+		}
- 	}
- 
- 	/* Clear the status register, to avoid the interrupts to
---- a/drivers/net/ethernet/qualcomm/essedma/edma.h
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
-@@ -225,6 +225,7 @@ struct edma_ethtool_statistics {
- 	u32 rx_q6_byte;
- 	u32 rx_q7_byte;
- 	u32 tx_desc_error;
-+	u32 rx_alloc_fail_ctr;
- };
- 
- struct edma_mdio_data {
-@@ -362,6 +363,7 @@ struct edma_rfd_desc_ring {
- 	dma_addr_t dma; /* descriptor ring physical address */
- 	u16 sw_next_to_fill; /* next descriptor to fill */
- 	u16 sw_next_to_clean; /* next descriptor to clean */
-+	u16 pending_fill; /* fill pending from previous iteration */
- };
- 
- /* edma_rfs_flter_node - rfs filter node in hash table */
---- a/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
-@@ -78,6 +78,7 @@ static const struct edma_ethtool_stats e
- 	{"rx_q6_byte", EDMA_STAT(rx_q6_byte)},
- 	{"rx_q7_byte", EDMA_STAT(rx_q7_byte)},
- 	{"tx_desc_error", EDMA_STAT(tx_desc_error)},
-+	{"rx_alloc_fail_ctr", EDMA_STAT(rx_alloc_fail_ctr)},
- };
- 
- #define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats)
diff --git a/target/linux/ipq40xx/patches-4.19/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-4.19/850-soc-add-qualcomm-syscon.patch
deleted file mode 100644
index 7b4eeff5bb..0000000000
--- a/target/linux/ipq40xx/patches-4.19/850-soc-add-qualcomm-syscon.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From: Christian Lamparter <chunkeey@googlemail.com>
-Subject: SoC: add qualcomm syscon
---- a/drivers/soc/qcom/Makefile
-+++ b/drivers/soc/qcom/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st
- obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
- obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
- obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
-+obj-$(CONFIG_QCOM_TCSR)	 += qcom_tcsr.o
- obj-$(CONFIG_QCOM_APR) += apr.o
- obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
- obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
---- a/drivers/soc/qcom/Kconfig
-+++ b/drivers/soc/qcom/Kconfig
-@@ -146,6 +146,13 @@ config QCOM_SMSM
- 	  Say yes here to support the Qualcomm Shared Memory State Machine.
- 	  The state machine is represented by bits in shared memory.
- 
-+config QCOM_TCSR
-+	tristate "QCOM Top Control and Status Registers"
-+	depends on ARCH_QCOM
-+	help
-+	  Say y here to enable TCSR support.  The TCSR provides control
-+	  functions for various peripherals.
-+
- config QCOM_WCNSS_CTRL
- 	tristate "Qualcomm WCNSS control driver"
- 	depends on ARCH_QCOM
---- /dev/null
-+++ b/drivers/soc/qcom/qcom_tcsr.c
-@@ -0,0 +1,98 @@
-+/*
-+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License rev 2 and
-+ * only rev 2 as published by the free Software foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+
-+#define TCSR_USB_PORT_SEL	0xb0
-+#define TCSR_USB_HSPHY_CONFIG	0xC
-+
-+#define TCSR_ESS_INTERFACE_SEL_OFFSET   0x0
-+#define TCSR_ESS_INTERFACE_SEL_MASK     0xf
-+
-+#define TCSR_WIFI0_GLB_CFG_OFFSET	0x0
-+#define TCSR_WIFI1_GLB_CFG_OFFSET	0x4
-+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2	0x4
-+
-+static int tcsr_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	const struct device_node *node = pdev->dev.of_node;
-+	void __iomem *base;
-+	u32 val;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(base))
-+		return PTR_ERR(base);
-+
-+	if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
-+		dev_err(&pdev->dev, "setting usb port select = %d\n", val);
-+		writel(val, base + TCSR_USB_PORT_SEL);
-+	}
-+
-+	if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) {
-+		dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val);
-+		writel(val, base + TCSR_USB_HSPHY_CONFIG);
-+	}
-+
-+	if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) {
-+		u32 tmp = 0;
-+		dev_info(&pdev->dev, "setting ess interface select = %x\n", val);
-+		tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET);
-+		tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK);
-+		tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK);
-+		writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET);
-+        }
-+
-+	if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) {
-+		dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val);
-+		writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET);
-+		writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET);
-+	}
-+
-+	if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) {
-+		dev_info(&pdev->dev,
-+			"setting wifi_noc_memtype_m0_m2 = %x\n", val);
-+		writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2);
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id tcsr_dt_match[] = {
-+	{ .compatible = "qcom,tcsr", },
-+	{ },
-+};
-+
-+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
-+
-+static struct platform_driver tcsr_driver = {
-+	.driver = {
-+		.name		= "tcsr",
-+		.owner		= THIS_MODULE,
-+		.of_match_table	= tcsr_dt_match,
-+	},
-+	.probe = tcsr_probe,
-+};
-+
-+module_platform_driver(tcsr_driver);
-+
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_DESCRIPTION("QCOM TCSR driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/include/dt-bindings/soc/qcom,tcsr.h
-@@ -0,0 +1,48 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+#ifndef __DT_BINDINGS_QCOM_TCSR_H
-+#define __DT_BINDINGS_QCOM_TCSR_H
-+
-+#define TCSR_USB_SELECT_USB3_P0		0x1
-+#define TCSR_USB_SELECT_USB3_P1		0x2
-+#define TCSR_USB_SELECT_USB3_DUAL	0x3
-+
-+/* IPQ40xx HS PHY Mode Select */
-+#define TCSR_USB_HSPHY_HOST_MODE	0x00E700E7
-+#define TCSR_USB_HSPHY_DEVICE_MODE	0x00C700E7
-+
-+/* IPQ40xx ess interface mode select */
-+#define TCSR_ESS_PSGMII              0
-+#define TCSR_ESS_PSGMII_RGMII5       1
-+#define TCSR_ESS_PSGMII_RMII0        2
-+#define TCSR_ESS_PSGMII_RMII1        4
-+#define TCSR_ESS_PSGMII_RMII0_RMII1  6
-+#define TCSR_ESS_PSGMII_RGMII4       9
-+
-+/*
-+ * IPQ40xx WiFi Global Config
-+ * Bit 30:AXID_EN
-+ * Enable AXI master bus Axid translating to confirm all txn submitted by order
-+ * Bit 24: Use locally generated socslv_wxi_bvalid
-+ * 1:  use locally generate socslv_wxi_bvalid for performance.
-+ * 0:  use SNOC socslv_wxi_bvalid.
-+ */
-+#define TCSR_WIFI_GLB_CFG		0x41000000
-+
-+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */
-+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2	0x02222222
-+
-+/* TCSR A/B REG */
-+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL     0
-+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL     1
-+
-+#endif
diff --git a/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch
deleted file mode 100644
index 48825375eb..0000000000
--- a/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch
+++ /dev/null
@@ -1,157 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -15,6 +15,7 @@
-  */
- 
- #include "qcom-ipq4019.dtsi"
-+#include <dt-bindings/soc/qcom,tcsr.h>
- 
- / {
- 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
-@@ -29,6 +30,32 @@
- 	};
- 
- 	soc {
-+		tcsr@194b000 {
-+			/* select hostmode */
-+			compatible = "qcom,tcsr";
-+			reg = <0x194b000 0x100>;
-+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-+			status = "ok";
-+		};
-+
-+		ess_tcsr@1953000 {
-+			compatible = "qcom,tcsr";
-+			reg = <0x1953000 0x1000>;
-+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-+		};
-+
-+		tcsr@1949000 {
-+			compatible = "qcom,tcsr";
-+			reg = <0x1949000 0x100>;
-+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-+		};
-+
-+		tcsr@1957000 {
-+			compatible = "qcom,tcsr";
-+			reg = <0x1957000 0x100>;
-+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-+		};
-+
- 		rng@22000 {
- 			status = "ok";
- 		};
-@@ -74,14 +101,6 @@
- 			pinctrl-names = "default";
- 			status = "ok";
- 			cs-gpios = <&tlmm 54 0>;
--
--			mx25l25635e@0 {
--				#address-cells = <1>;
--				#size-cells = <1>;
--				reg = <0>;
--				compatible = "mx25l25635e";
--				spi-max-frequency = <24000000>;
--			};
- 		};
- 
- 		serial@78af000 {
-@@ -110,6 +129,22 @@
- 			status = "ok";
- 		};
- 
-+		mdio@90000 {
-+			status = "okay";
-+		};
-+
-+		ess-switch@c000000 {
-+			status = "okay";
-+		};
-+
-+		ess-psgmii@98000 {
-+			status = "okay";
-+		};
-+
-+		edma@c080000 {
-+			status = "okay";
-+		};
-+
- 		usb3_ss_phy: ssphy@9a000 {
- 			status = "ok";
- 		};
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-@@ -18,5 +18,73 @@
- 
- / {
- 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
-+	compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1";
- 
-+	memory {
-+		device_type = "memory";
-+		reg = <0x80000000 0x10000000>;
-+	};
-+};
-+
-+&blsp1_spi1 {
-+	mx25l25635f@0 {
-+		compatible = "mx25l25635f", "jedec,spi-nor";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		reg = <0>;
-+		spi-max-frequency = <24000000>;
-+
-+		SBL1@0 {
-+			label = "SBL1";
-+			reg = <0x0 0x40000>;
-+			read-only;
-+		};
-+		MIBIB@40000 {
-+			label = "MIBIB";
-+			reg = <0x40000 0x20000>;
-+			read-only;
-+		};
-+		QSEE@60000 {
-+			label = "QSEE";
-+			reg = <0x60000 0x60000>;
-+			read-only;
-+		};
-+		CDT@c0000 {
-+			label = "CDT";
-+			reg = <0xc0000 0x10000>;
-+			read-only;
-+		};
-+		DDRPARAMS@d0000 {
-+			label = "DDRPARAMS";
-+			reg = <0xd0000 0x10000>;
-+			read-only;
-+		};
-+		APPSBLENV@e0000 {
-+			label = "APPSBLENV";
-+			reg = <0xe0000 0x10000>;
-+			read-only;
-+		};
-+		APPSBL@f0000 {
-+			label = "APPSBL";
-+			reg = <0xf0000 0x80000>;
-+			read-only;
-+		};
-+		ART@170000 {
-+			label = "ART";
-+			reg = <0x170000 0x10000>;
-+			read-only;
-+		};
-+		kernel@180000 {
-+			label = "kernel";
-+			reg = <0x180000 0x400000>;
-+		};
-+		rootfs@580000 {
-+			label = "rootfs";
-+			reg = <0x580000 0x1600000>;
-+		};
-+		firmware@180000 {
-+			label = "firmware";
-+			reg = <0x180000 0x1a00000>;
-+		};
-+	};
- };
diff --git a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
deleted file mode 100644
index a0386f6b66..0000000000
--- a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 11:03:18 +0100
-Subject: [PATCH 69/69] arm: boot: add dts files
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/boot/dts/Makefile | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -785,11 +785,33 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- 	qcom-apq8074-dragonboard.dtb \
- 	qcom-apq8084-ifc6540.dtb \
- 	qcom-apq8084-mtp.dtb \
-+	qcom-ipq4018-a42.dtb \
-+	qcom-ipq4018-ap120c-ac.dtb \
-+	qcom-ipq4018-ea6350v3.dtb \
-+	qcom-ipq4018-eap1300.dtb \
-+	qcom-ipq4018-ens620ext.dtb \
-+	qcom-ipq4018-ex6100v2.dtb \
-+	qcom-ipq4018-ex6150v2.dtb \
-+	qcom-ipq4018-fritz4040.dtb \
-+	qcom-ipq4018-jalapeno.dtb \
-+	qcom-ipq4018-nbg6617.dtb \
-+	qcom-ipq4018-rt-ac58u.dtb \
-+	qcom-ipq4018-wre6606.dtb \
- 	qcom-ipq4019-ap.dk01.1-c1.dtb \
- 	qcom-ipq4019-ap.dk04.1-c1.dtb \
- 	qcom-ipq4019-ap.dk04.1-c3.dtb \
- 	qcom-ipq4019-ap.dk07.1-c1.dtb \
- 	qcom-ipq4019-ap.dk07.1-c2.dtb \
-+	qcom-ipq4019-a62.dtb \
-+	qcom-ipq4019-fritzbox-7530.dtb \
-+	qcom-ipq4019-fritzrepeater-3000.dtb \
-+	qcom-ipq4019-linksys_ea8300.dtb \
-+	qcom-ipq4019-map-ac2200.dtb \
-+	qcom-ipq4019-qxwlan-e2600ac-c1.dtb \
-+	qcom-ipq4019-qxwlan-e2600ac-c2.dtb \
-+	qcom-ipq4028-wpj428.dtb \
-+	qcom-ipq4029-gl-b1300.dtb \
-+	qcom-ipq4029-mr33.dtb \
- 	qcom-ipq8064-ap148.dtb \
- 	qcom-msm8660-surf.dtb \
- 	qcom-msm8960-cdp.dtb \
diff --git a/target/linux/ipq40xx/patches-4.19/997-device_tree_cmdline.patch b/target/linux/ipq40xx/patches-4.19/997-device_tree_cmdline.patch
deleted file mode 100644
index 7600b0e83f..0000000000
--- a/target/linux/ipq40xx/patches-4.19/997-device_tree_cmdline.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1090,6 +1090,9 @@ int __init early_init_dt_scan_chosen(uns
- 	p = of_get_flat_dt_prop(node, "bootargs", &l);
- 	if (p != NULL && l > 0)
- 		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-+	p = of_get_flat_dt_prop(node, "bootargs-append", &l);
-+	if (p != NULL && l > 0)
-+		strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
- 
- 	/*
- 	 * CONFIG_CMDLINE is meant to be a default in case nothing else
diff --git a/target/linux/ixp4xx/Makefile b/target/linux/ixp4xx/Makefile
deleted file mode 100644
index e1964331a0..0000000000
--- a/target/linux/ixp4xx/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=armeb
-BOARD:=ixp4xx
-BOARDNAME:=Intel IXP4xx
-FEATURES:=squashfs
-MAINTAINER:=Ted Hess <thess@kitschensync.net>, \
-	    Imre Kaloz <kaloz@openwrt.org>
-SUBTARGETS:=generic harddisk
-
-KERNEL_PATCHVER:=4.9
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += ixp4xx-microcode fconfig
-KERNELNAME:=zImage
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/ixp4xx/base-files/lib/ixp4xx.sh b/target/linux/ixp4xx/base-files/lib/ixp4xx.sh
deleted file mode 100644
index 3f73dd98e0..0000000000
--- a/target/linux/ixp4xx/base-files/lib/ixp4xx.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-
-IXP4XX_BOARD_NAME=
-IXP4XX_MODEL=
-
-ixp4xx_board_detect() {
-	local machine
-	local name
-
-	machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /Hardware/ {print $2}' /proc/cpuinfo)
-
-	case "$machine" in
-	"Gateworks Cambria"*)
-		name="cambria"
-		;;
-	"Gateworks Avila"*)
-		name="avila"
-		;;
-	*)
-		name="generic";
-		;;
-	esac
-
-	[ -z "$IXP4XX_BOARD_NAME" ] && IXP4XX_BOARD_NAME="$name"
-	[ -z "$IXP4XX_MODEL" ] && IXP4XX_MODEL="$machine"
-
-	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
-	echo "$IXP4XX_BOARD_NAME" > /tmp/sysinfo/board_name
-	echo "$IXP4XX_MODEL" > /tmp/sysinfo/model
-}
diff --git a/target/linux/ixp4xx/base-files/lib/preinit/01_sysinfo b/target/linux/ixp4xx/base-files/lib/preinit/01_sysinfo
deleted file mode 100644
index 7699e9a10e..0000000000
--- a/target/linux/ixp4xx/base-files/lib/preinit/01_sysinfo
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-do_sysinfo_ixp4xx() {
-	. /lib/ixp4xx.sh
-
-	ixp4xx_board_detect
-}
-
-boot_hook_add preinit_main do_sysinfo_ixp4xx
diff --git a/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx b/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
deleted file mode 100644
index adda197b59..0000000000
--- a/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set_ether_mac() {
-
-	RB_CONFIG="$(grep "RedBoot config" /proc/mtd | cut -d: -f1)"
-
-	for npe in eth0 eth1 eth2
-	do
-		if [ "$(ifconfig $npe 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
-			ifconfig $npe hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n npe_"$npe"_esa)
-		fi
-	done
-
-	# Some developers should be shot on sight at Zcom/Netgear
-	# -- Fixup for the WG302v1, need someone with a WAG302v1 to fix that, too
-
-	if [ "$(ifconfig eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
-			ifconfig eth0 hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n zcom_npe_esa)
-	fi
-
-	# Others (*cough*, Tonze) are dumb enough to not handle mac addresses at all
-
-	if [ "$(ifconfig eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
-		ifconfig eth0 hw ether 00:11:22:33:44:55
-	fi
-	if [ "$(ifconfig eth1 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
-		ifconfig eth1 hw ether 00:11:22:33:44:56
-	fi
-}
-
-boot_hook_add preinit_main set_ether_mac
-
diff --git a/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh b/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index 92eeaffef6..0000000000
--- a/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,137 +0,0 @@
-CI_BLKSZ=65536
-CI_LDADR=0x00800000
-
-platform_find_partitions() {
-	local first dev size erasesize name
-	while read dev size erasesize name; do
-		name=${name#'"'}; name=${name%'"'}
-		case "$name" in
-			vmlinux.bin.l7|kernel|linux|rootfs)
-				if [ -z "$first" ]; then
-					first="$name"
-				else
-					echo "$erasesize:$first:$name"
-					break
-				fi
-			;;
-		esac
-	done < /proc/mtd
-}
-
-platform_find_kernelpart() {
-	local part
-	for part in "${1%:*}" "${1#*:}"; do
-		case "$part" in
-			vmlinux.bin.l7|kernel|linux)
-				echo "$part"
-				break
-			;;
-		esac
-	done
-}
-
-platform_find_part_size() {
-	local first dev size erasesize name
-	while read dev size erasesize name; do
-		name=${name#'"'}; name=${name%'"'}
-		[ "$name" = "$1" ] && {
-			echo "$size"
-			break
-		}
-	done < /proc/mtd
-}
-
-platform_do_upgrade_combined() {
-	local partitions=$(platform_find_partitions)
-	local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
-	local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
-	local kern_part_size=0x$(platform_find_part_size "$kernelpart")
-	local kern_part_blocks=$(($kern_part_size / $CI_BLKSZ))
-	local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
-	local kern_blocks=$(($kern_length / $CI_BLKSZ))
-	local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
-
-	v "platform_do_upgrade_combined"
-	v "partitions=$partitions"
-	v "kernelpart=$kernelpart"
-	v "kernel_part_size=$kern_part_size"
-	v "kernel_part_blocks=$kern_part_blocks"
-	v "kern_length=$kern_length"
-	v "erase_size=$erase_size"
-	v "kern_blocks=$kern_blocks"
-	v "root_blocks=$root_blocks"
-	v "kern_pad_blocks=$(($kern_part_blocks-$kern_blocks))"
-
-	if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
-	   [ ${kern_blocks:-0} -gt 0 ] && \
-	   [ ${root_blocks:-0} -gt 0 ] && \
-	   [ ${erase_size:-0} -gt 0 ];
-	then
-		local append=""
-		[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
-
-		# write the kernel
-		dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
-			mtd -F$kernelpart:$kern_part_size:$CI_LDADR write - $kernelpart
-		# write the rootfs
-		dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \
-			mtd $append write - rootfs
-	else
-		echo "invalid image"
-	fi
-}
-
-platform_check_image() {
-	local board=$(board_name)
-	local magic="$(get_magic_word "$1")"
-	local partitions=$(platform_find_partitions)
-	local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
-	local kern_part_size=0x$(platform_find_part_size "$kernelpart")
-	local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
-
-	[ "$#" -gt 1 ] && return 1
-
-	case "$board" in
-	avila | cambria )
-		[ "$magic" != "4349" ] && {
-			echo "Invalid image. Use *-sysupgrade.bin files on this board"
-			return 1
-		}
-
-		kern_length_b=$(printf '%d' $kern_length)
-		kern_part_size_b=$(printf '%d' $kern_part_size)
-		if [ $kern_length_b -gt $kern_part_size_b ]; then
-			echo "Invalid image. Kernel size ($kern_length) exceeds kernel partition ($kern_part_size)"
-			return 1
-		fi
-
-		local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
-		local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
-		if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
-			return 0
-		else
-			echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
-			return 1
-		fi
-
-		return 0
-		;;
-	esac
-
-	echo "Sysupgrade is not yet supported on $board."
-	return 1
-}
-
-platform_do_upgrade() {
-	local board=$(board_name)
-
-	v "board=$board"
-	case "$board" in
-	avila | cambria )
-		platform_do_upgrade_combined "$ARGV"
-		;;
-	*)
-		default_do_upgrade "$ARGV"
-		;;
-	esac
-}
diff --git a/target/linux/ixp4xx/config-4.9 b/target/linux/ixp4xx/config-4.9
deleted file mode 100644
index c9b1be9304..0000000000
--- a/target/linux/ixp4xx/config-4.9
+++ /dev/null
@@ -1,247 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_ADI_COYOTE is not set
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_IXCDP1100=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_ARCH_IXDP4XX=y
-CONFIG_ARCH_IXP4XX=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ATAGS=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_ENDIAN_BE32=y
-# CONFIG_CPU_ENDIAN_BE8 is not set
-CONFIG_CPU_IXP43X=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xc8000003
-CONFIG_DEBUG_UART_VIRT=0xfef00003
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMABOUNCE=y
-CONFIG_DNOTIFY=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_IXP4XX=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_IXP4XX_ETH=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
-CONFIG_IXP4XX_NPE=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_WATCHDOG=y
-CONFIG_LEDS_FSG=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LATCH=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_AP1000=y
-CONFIG_MACH_AP42X=y
-# CONFIG_MACH_ARCOM_VULCAN is not set
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_CAMBRIA=y
-CONFIG_MACH_COMPEXWP18=y
-# CONFIG_MACH_DEVIXP is not set
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GATEWAY7001=y
-# CONFIG_MACH_GORAMO_MLR is not set
-# CONFIG_MACH_GTWX5715 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_MACH_IXDPG425=y
-# CONFIG_MACH_KIXRP435 is not set
-CONFIG_MACH_LOFT=y
-CONFIG_MACH_MI424WR=y
-# CONFIG_MACH_MIC256 is not set
-# CONFIG_MACH_MICCPT is not set
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_PRONGHORN=y
-CONFIG_MACH_PRONGHORNMETRO=y
-CONFIG_MACH_SIDEWINDER=y
-CONFIG_MACH_TW2662=y
-CONFIG_MACH_TW5334=y
-CONFIG_MACH_USR8200=y
-CONFIG_MACH_WG302V1=y
-CONFIG_MACH_WG302V2=y
-CONFIG_MACH_WRT300NV2=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_IXP4XX=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_MACH_IO_H=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_XSCALE=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NVMEM=y
-# CONFIG_OF is not set
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RTC_DRV_ISL1208=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_X1205=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SENSORS_AD7418=y
-CONFIG_SENSORS_MAX6650=y
-CONFIG_SENSORS_W83781D=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
-CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/ixp4xx/generic/profiles/100-Default.mk b/target/linux/ixp4xx/generic/profiles/100-Default.mk
deleted file mode 100644
index c881c8001d..0000000000
--- a/target/linux/ixp4xx/generic/profiles/100-Default.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
-  NAME:=Default Profile
-  PACKAGES:=kmod-ath5k
-endef
-
-define Profile/Default/Description
-	Default IXP4xx Profile
-endef
-$(eval $(call Profile,Default))
-
diff --git a/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk b/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk
deleted file mode 100644
index 8f74277c3b..0000000000
--- a/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Atheros-ath5k
-  NAME:=Atheros WiFi (atk5k)
-  PACKAGES:=kmod-ath5k
-endef
-
-define Profile/Atheros-ath5k/Description
-	Package set compatible with hardware using Atheros WiFi cards
-endef
-$(eval $(call Profile,Atheros-ath5k))
-
diff --git a/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk b/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk
deleted file mode 100644
index 6a54f74bf3..0000000000
--- a/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/NSLU2
-  NAME:=Linksys NSLU2
-  PACKAGES:=-wpad-basic -kmod-ath5k kmod-scsi-core \
-	kmod-usb-core kmod-usb-ohci-pci kmod-usb2-pci kmod-usb-storage \
-	kmod-fs-ext4
-endef
-
-define Profile/NSLU2/Description
-	Package set optimized for the Linksys NSLU2
-endef
-$(eval $(call Profile,NSLU2))
-
diff --git a/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk b/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk
deleted file mode 100644
index 28ac79c41c..0000000000
--- a/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/NAS100d
-  NAME:=Iomega NAS 100d
-  PACKAGES:=kmod-ath5k \
-	kmod-scsi-core \
-	kmod-ata-core kmod-ata-artop \
-	kmod-usb-core kmod-usb2-pci kmod-usb-storage \
-	kmod-fs-ext4
-endef
-
-define Profile/NAS100d/Description
-	Package set optimized for the Iomega NAS 100d
-endef
-$(eval $(call Profile,NAS100d))
-
diff --git a/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk b/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk
deleted file mode 100644
index c8b53a841b..0000000000
--- a/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/DSMG600RevA
-  NAME:=DSM-G600 Rev A
-  PACKAGES:=kmod-via-velocity \
-	kmod-ath5k \
-	kmod-scsi-core \
-	kmod-ata-core kmod-ata-artop \
-	kmod-usb-core kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
-	kmod-fs-ext4
-endef
-
-define Profile/DSMG600RevA/Description
-	Package set optimized for the DSM-G600 Rev A
-endef
-$(eval $(call Profile,DSMG600RevA))
-
diff --git a/target/linux/ixp4xx/generic/profiles/500-USR8200.mk b/target/linux/ixp4xx/generic/profiles/500-USR8200.mk
deleted file mode 100644
index 959c399e92..0000000000
--- a/target/linux/ixp4xx/generic/profiles/500-USR8200.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/USR8200
-  NAME:=USRobotics USR8200
-  PACKAGES:=-wpad-basic kmod-scsi-core \
-	kmod-usb-core kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
-	kmod-fs-ext4 kmod-firewire kmod-firewire-ohci kmod-firewire-sbp2
-endef
-
-define Profile/USR8200/Description
-	Package set optimized for the USRobotics USR8200
-endef
-$(eval $(call Profile,USR8200))
-
diff --git a/target/linux/ixp4xx/generic/target.mk b/target/linux/ixp4xx/generic/target.mk
deleted file mode 100644
index 4794755fdc..0000000000
--- a/target/linux/ixp4xx/generic/target.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-BOARDNAME:=Generic
-
-DEFAULT_PACKAGES+= wpad-basic
-
-define Target/Description
-	Build firmware images for ixp4xx based boards that boot from internal flash
-	(e.g : Linksys NSLU2, ...)
-endef
-
diff --git a/target/linux/ixp4xx/harddisk/config-default b/target/linux/ixp4xx/harddisk/config-default
deleted file mode 100644
index 78e599ca86..0000000000
--- a/target/linux/ixp4xx/harddisk/config-default
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_ATA=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CMDLINE="root=/dev/sda1 noinitrd console=ttyS0,115200"
-CONFIG_EXT4_FS=y
-CONFIG_JBD=y
-CONFIG_REISERFS_FS=y
-CONFIG_SATA_VIA=y
-CONFIG_USB=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_STORAGE=y
diff --git a/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk b/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk
deleted file mode 100644
index 21f5e1fd43..0000000000
--- a/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/FSG3
-  NAME:=Freecom FSG-3
-  PACKAGES:= \
-	kmod-ath5k \
-	kmod-usb-core kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
-	kmod-fs-ext4 kmod-fs-reiserfs
-endef
-
-define Profile/FSG3/Description
-	Package set optimized for the Freecom FSG-3
-endef
-$(eval $(call Profile,FSG3))
-
diff --git a/target/linux/ixp4xx/harddisk/target.mk b/target/linux/ixp4xx/harddisk/target.mk
deleted file mode 100644
index c71065e5f1..0000000000
--- a/target/linux/ixp4xx/harddisk/target.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-BOARDNAME:=Internal Hard-Disk
-
-define Target/Description
-	Build firmware images for ixp4xx based boards that boot directly from internal disk storage
-	(e.g : Freecom FSG-3, ...)
-endef
diff --git a/target/linux/ixp4xx/image/Makefile b/target/linux/ixp4xx/image/Makefile
deleted file mode 100644
index 5b6ff0b08e..0000000000
--- a/target/linux/ixp4xx/image/Makefile
+++ /dev/null
@@ -1,76 +0,0 @@
-# 
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-ifdef CONFIG_PACKAGE_apex
-  define Image/Build/Linksys
-	BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
-		-L $(STAGING_DIR_IMAGE)/apex-$(2)-armeb.bin \
-		-k $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage \
-		-r rootfs:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img \
-		-p -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).bin
-	BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
-		-F -L $(STAGING_DIR_IMAGE)/apex-$(2)-16mb-armeb.bin \
-		-k $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage \
-		-r rootfs:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img \
-		-p -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-16mb.bin
-  endef
-endif
-
-define Image/Build/Freecom
-	$(INSTALL_DIR) $(TARGET_DIR)/boot
-	# TODO: Add special CMDLINE shim for webupgrade image here
-	$(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage $(TARGET_DIR)/zImage
-	$(TAR) cfj $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
-	$(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).img $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-webupgrade.img
-	rm -f $(TARGET_DIR)/zImage
-endef
-
-define Image/BuildKernel
-	cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
-	BIN_DIR=$(BIN_DIR) IMG_PREFIX="$(IMG_PREFIX)" $(TOPDIR)/scripts/arm-magic.sh
-endef
-
-define Image/BuildKernel/Initramfs
-	cp $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-initramfs-zImage
-	BIN_DIR=$(BIN_DIR) IMG_PREFIX="$(IMG_PREFIX)-initramfs" $(TOPDIR)/scripts/arm-magic.sh
-endef
-
-# Build sysupgrade image
-define BuildFirmware/Generic
-	dd if=$(KDIR)/zImage of=$(KDIR)/zImage.pad bs=64k conv=sync; \
-	dd if=$(KDIR)/root.$(1) of=$(KDIR)/root.$(1).pad bs=128k conv=sync; \
-	sh $(TOPDIR)/scripts/combined-image.sh \
-		$(KDIR)/zImage.pad \
-		$(KDIR)/root.$(1).pad \
-		$(BIN_DIR)/$(IMG_PREFIX)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))-sysupgrade.bin
-endef
-
-define Image/Build
-	$(call Image/Build/$(1),$(1))
-	$(call BuildFirmware/Generic,$(1))
-endef
-
-define Image/Build/jffs2-64k
-	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=65536 conv=sync
-endef
-
-define Image/Build/jffs2-128k
-	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
-	$(call Image/Build/Linksys,$(1),nslu2,$(1))
-	$(call Image/Build/Freecom,$(1),fsg3,$(1))
-endef
-
-define Image/Build/squashfs
-	$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
-	$(call Image/Build/Linksys,$(1),nslu2,$(1))
-	$(call Image/Build/Freecom,$(1),fsg3,$(1))
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/ixp4xx/modules.mk b/target/linux/ixp4xx/modules.mk
deleted file mode 100644
index 2d6446c05b..0000000000
--- a/target/linux/ixp4xx/modules.mk
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/ata-ixp4xx-cf
-  SUBMENU:=$(BLOCK_MENU)
-  TITLE:=IXP4XX Compact Flash support
-  DEPENDS:=@TARGET_ixp4xx
-  KCONFIG:=CONFIG_PATA_IXP4XX_CF
-  FILES:=$(LINUX_DIR)/drivers/ata/pata_ixp4xx_cf.ko
-  AUTOLOAD:=$(call AutoLoad,41,pata_ixp4xx_cf,1)
-  $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-ixp4xx-cf/description
- IXP4XX Compact Flash support.
-endef
-
-$(eval $(call KernelPackage,ata-ixp4xx-cf))
-
-
-define KernelPackage/ixp4xx-beeper
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=IXP4XX Beeper support
-  DEPENDS:=@TARGET_ixp4xx +kmod-input-core
-  KCONFIG:= \
-	CONFIG_INPUT_MISC=y \
-	CONFIG_INPUT_IXP4XX_BEEPER
-  FILES:=$(LINUX_DIR)/drivers/input/misc/ixp4xx-beeper.ko
-  AUTOLOAD:=$(call AutoLoad,50,ixp4xx-beeper)
-  $(call AddDepends/input)
-endef
-
-define KernelPackage/ixp4xx-beeper/description
- IXP4XX Beeper support
-endef
-
-$(eval $(call KernelPackage,ixp4xx-beeper))
-
-
-define KernelPackage/crypto-hw-ixp4xx
-  TITLE:=Intel IXP4xx hardware crypto module
-  DEPENDS:=@TARGET_ixp4xx
-  KCONFIG:= \
-	CONFIG_CRYPTO_DEV_IXP4XX
-  FILES:=$(LINUX_DIR)/drivers/crypto/ixp4xx_crypto.ko
-  AUTOLOAD:=$(call AutoLoad,90,ixp4xx_crypto)
-  $(call AddDepends/crypto,+kmod-crypto-authenc +kmod-crypto-des)
-endef
-
-define KernelPackage/crypto-hw-ixp4xx/description
-  Kernel support for the Intel IXP4xx HW crypto engine.
-endef
-
-$(eval $(call KernelPackage,crypto-hw-ixp4xx))
-
-
-define KernelPackage/ixp4xx-eth
-  SUBMENU:=$(NETWORK_DEVICES_MENU)
-  TITLE:=IXP4xxt Ethernet Adapter kernel support
-  DEPENDS:=@TARGET_ixp4xx
-  KCONFIG:=CONFIG_IXP4XX_ETH
-  FILES:=$(LINUX_DIR)/drivers/net/ethernet/xscale/ixp4xx_eth.ko
-  AUTOLOAD:=$(call AutoLoad,50,ixp4xx_eth)
-endef
-
-define KernelPackage/ixp4xx-eth/description
- Kernel modules for Intel IXP4xx Ethernet chipsets.
-endef
-
-$(eval $(call KernelPackage,ixp4xx-eth))
diff --git a/target/linux/ixp4xx/patches-4.9/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch b/target/linux/ixp4xx/patches-4.9/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
deleted file mode 100644
index 3ca3eb76a6..0000000000
--- a/target/linux/ixp4xx/patches-4.9/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 7113f56b683c5123df5c20724ac813cee66fa21a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Jul 2013 16:49:05 +0200
-Subject: [PATCH 1/2] arm: ixp4xx: set cohorent_dma_mask for ethernet platform
- devices
-
-ARM requires the cohorent_dma_mask set, so set it for the platform
-devices so that the ethernet driver has access to it.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/arm/mach-ixp4xx/fsg-setup.c     |    2 ++
- arch/arm/mach-ixp4xx/goramo_mlr.c    |    2 ++
- arch/arm/mach-ixp4xx/ixdp425-setup.c |    3 +++
- arch/arm/mach-ixp4xx/nas100d-setup.c |    1 +
- arch/arm/mach-ixp4xx/nslu2-setup.c   |    1 +
- arch/arm/mach-ixp4xx/omixp-setup.c   |    3 +++
- arch/arm/mach-ixp4xx/vulcan-setup.c  |    2 ++
- 7 files changed, 14 insertions(+)
-
---- a/arch/arm/mach-ixp4xx/fsg-setup.c
-+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
-@@ -142,12 +142,14 @@ static struct platform_device fsg_eth[]
- 		.id			= IXP4XX_ETH_NPEB,
- 		.dev = {
- 			.platform_data	= fsg_plat_eth,
-+			.coherent_dma_mask = DMA_BIT_MASK(32),
- 		},
- 	}, {
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEC,
- 		.dev = {
- 			.platform_data	= fsg_plat_eth + 1,
-+			.coherent_dma_mask = DMA_BIT_MASK(32),
- 		},
- 	}
- };
---- a/arch/arm/mach-ixp4xx/goramo_mlr.c
-+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
-@@ -295,10 +295,12 @@ static struct platform_device device_eth
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEB,
- 		.dev.platform_data	= eth_plat,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
- 	}, {
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEC,
- 		.dev.platform_data	= eth_plat + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
- 	}
- };
- 
---- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -20,6 +20,7 @@
- #include <linux/mtd/nand.h>
- #include <linux/mtd/partitions.h>
- #include <linux/delay.h>
-+#include <linux/dma-mapping.h>
- #include <linux/gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -196,10 +197,12 @@ static struct platform_device ixdp425_et
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEB,
- 		.dev.platform_data	= ixdp425_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
- 	}, {
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEC,
- 		.dev.platform_data	= ixdp425_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
- 	}
- };
- 
---- a/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -170,6 +170,7 @@ static struct platform_device nas100d_et
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEB,
- 		.dev.platform_data	= nas100d_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
- 	}
- };
- 
---- a/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -182,6 +182,7 @@ static struct platform_device nslu2_eth[
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEB,
- 		.dev.platform_data	= nslu2_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
- 	}
- };
- 
---- a/arch/arm/mach-ixp4xx/omixp-setup.c
-+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
-@@ -17,6 +17,7 @@
- #include <linux/serial_8250.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/dma-mapping.h>
- #include <linux/leds.h>
- 
- #include <asm/setup.h>
-@@ -188,10 +189,12 @@ static struct platform_device ixdp425_et
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEB,
- 		.dev.platform_data	= ixdp425_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
- 	}, {
- 		.name			= "ixp4xx_eth",
- 		.id			= IXP4XX_ETH_NPEC,
- 		.dev.platform_data	= ixdp425_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
- 	},
- };
- 
---- a/arch/arm/mach-ixp4xx/vulcan-setup.c
-+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
-@@ -139,6 +139,7 @@ static struct platform_device vulcan_eth
- 		.id			= IXP4XX_ETH_NPEB,
- 		.dev = {
- 			.platform_data	= &vulcan_plat_eth[0],
-+			.coherent_dma_mask = DMA_BIT_MASK(32),
- 		},
- 	},
- 	[1] = {
-@@ -146,6 +147,7 @@ static struct platform_device vulcan_eth
- 		.id			= IXP4XX_ETH_NPEC,
- 		.dev = {
- 			.platform_data	= &vulcan_plat_eth[1],
-+			.coherent_dma_mask = DMA_BIT_MASK(32),
- 		},
- 	},
- };
diff --git a/target/linux/ixp4xx/patches-4.9/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch b/target/linux/ixp4xx/patches-4.9/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
deleted file mode 100644
index b369b56f00..0000000000
--- a/target/linux/ixp4xx/patches-4.9/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 1d67040af0144c549f4db8144d2ccc253ff8639c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Jul 2013 16:39:28 +0200
-Subject: [PATCH 2/2] net: ixp4xx_eth: use parent device for dma allocations
-
-Now that the platfomr device provides a dma_cohorent_mask, use it for
-dma operations.
-
-This fixes ethernet on ixp4xx which was broken since 3.7.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/ethernet/xscale/ixp4xx_eth.c |   23 ++++++++++++-----------
- 1 file changed, 12 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -656,10 +656,10 @@ static inline void queue_put_desc(unsign
- static inline void dma_unmap_tx(struct port *port, struct desc *desc)
- {
- #ifdef __ARMEB__
--	dma_unmap_single(&port->netdev->dev, desc->data,
-+	dma_unmap_single(port->netdev->dev.parent, desc->data,
- 			 desc->buf_len, DMA_TO_DEVICE);
- #else
--	dma_unmap_single(&port->netdev->dev, desc->data & ~3,
-+	dma_unmap_single(port->netdev->dev.parent, desc->data & ~3,
- 			 ALIGN((desc->data & 3) + desc->buf_len, 4),
- 			 DMA_TO_DEVICE);
- #endif
-@@ -725,9 +725,9 @@ static int eth_poll(struct napi_struct *
- 
- #ifdef __ARMEB__
- 		if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
--			phys = dma_map_single(&dev->dev, skb->data,
-+			phys = dma_map_single(dev->dev.parent, skb->data,
- 					      RX_BUFF_SIZE, DMA_FROM_DEVICE);
--			if (dma_mapping_error(&dev->dev, phys)) {
-+			if (dma_mapping_error(dev->dev.parent, phys)) {
- 				dev_kfree_skb(skb);
- 				skb = NULL;
- 			}
-@@ -750,10 +750,11 @@ static int eth_poll(struct napi_struct *
- #ifdef __ARMEB__
- 		temp = skb;
- 		skb = port->rx_buff_tab[n];
--		dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
-+		dma_unmap_single(dev->dev.parent, desc->data - NET_IP_ALIGN,
- 				 RX_BUFF_SIZE, DMA_FROM_DEVICE);
- #else
--		dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN,
-+		dma_sync_single_for_cpu(dev->dev.parent,
-+					desc->data - NET_IP_ALIGN,
- 					RX_BUFF_SIZE, DMA_FROM_DEVICE);
- 		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
- 			      ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
-@@ -872,7 +873,7 @@ static int eth_xmit(struct sk_buff *skb,
- 	memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
- #endif
- 
--	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-+	phys = dma_map_single(dev->dev.parent, mem, bytes, DMA_TO_DEVICE);
- 	if (dma_mapping_error(&dev->dev, phys)) {
- 		dev_kfree_skb(skb);
- #ifndef __ARMEB__
-@@ -1107,7 +1108,7 @@ static int init_queues(struct port *port
- 	int i;
- 
- 	if (!ports_open) {
--		dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
-+		dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
- 					   POOL_ALLOC_SIZE, 32, 0);
- 		if (!dma_pool)
- 			return -ENOMEM;
-@@ -1135,9 +1136,9 @@ static int init_queues(struct port *port
- 		data = buff;
- #endif
- 		desc->buf_len = MAX_MRU;
--		desc->data = dma_map_single(&port->netdev->dev, data,
-+		desc->data = dma_map_single(port->netdev->dev.parent, data,
- 					    RX_BUFF_SIZE, DMA_FROM_DEVICE);
--		if (dma_mapping_error(&port->netdev->dev, desc->data)) {
-+		if (dma_mapping_error(port->netdev->dev.parent, desc->data)) {
- 			free_buffer(buff);
- 			return -EIO;
- 		}
-@@ -1157,7 +1158,7 @@ static void destroy_queues(struct port *
- 			struct desc *desc = rx_desc_ptr(port, i);
- 			buffer_t *buff = port->rx_buff_tab[i];
- 			if (buff) {
--				dma_unmap_single(&port->netdev->dev,
-+				dma_unmap_single(port->netdev->dev.parent,
- 						 desc->data - NET_IP_ALIGN,
- 						 RX_BUFF_SIZE, DMA_FROM_DEVICE);
- 				free_buffer(buff);
diff --git a/target/linux/ixp4xx/patches-4.9/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-4.9/020-gateworks_i2c_pld.patch
deleted file mode 100644
index 185a09fff2..0000000000
--- a/target/linux/ixp4xx/patches-4.9/020-gateworks_i2c_pld.patch
+++ /dev/null
@@ -1,424 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -656,6 +656,14 @@ config GPIO_WS16C48
- 	  parameter. The interrupt line numbers for the devices may be
- 	  configured via the irq module parameter.
- 
-+config GPIO_GW_I2C_PLD
-+	tristate "Gateworks I2C PLD GPIO Expander"
-+	depends on I2C
-+	help
-+		Say yes here to provide access to the Gateworks I2C PLD GPIO
-+		Expander. This is used at least on the GW2358-4.
-+
-+
- endmenu
- 
- menu "I2C GPIO expanders"
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_GPIO_F7188X)	+= gpio-f7188x
- obj-$(CONFIG_GPIO_GE_FPGA)	+= gpio-ge.o
- obj-$(CONFIG_GPIO_GPIO_MM)	+= gpio-gpio-mm.o
- obj-$(CONFIG_GPIO_GRGPIO)	+= gpio-grgpio.o
-+obj-$(CONFIG_GPIO_GW_I2C_PLD)	+= gw_i2c_pld.o
- obj-$(CONFIG_HTC_EGPIO)		+= gpio-htc-egpio.o
- obj-$(CONFIG_GPIO_ICH)		+= gpio-ich.o
- obj-$(CONFIG_GPIO_IOP)		+= gpio-iop.o
---- /dev/null
-+++ b/drivers/gpio/gw_i2c_pld.c
-@@ -0,0 +1,371 @@
-+/*
-+ * Gateworks I2C PLD GPIO expander
-+ *
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/hardirq.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <linux/module.h>
-+#include <linux/export.h>
-+#include <asm/gpio.h>
-+#include <mach/hardware.h>
-+
-+static const struct i2c_device_id gw_i2c_pld_id[] = {
-+	{ "gw_i2c_pld", 8 },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
-+
-+/*
-+ * The Gateworks I2C PLD chip only expose one read and one
-+ * write register.  Writing a "one" bit (to match the reset state) lets
-+ * that pin be used as an input. It is an open-drain model.
-+ */
-+
-+struct gw_i2c_pld {
-+	struct gpio_chip	chip;
-+	struct i2c_client	*client;
-+	unsigned		out;		/* software latch */
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
-+ * thus we cannot use standard i2c_smbus functions. We have recreated
-+ * our own here, but we still use the rt_mutex_lock to lock the i2c_bus
-+ * as the device still exists on the I2C bus.
-+*/
-+
-+#define PLD_SCL_GPIO 6
-+#define PLD_SDA_GPIO 7
-+
-+#define SCL_LO()  gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
-+#define SCL_HI()  gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
-+#define SCL_EN()  gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_LO()  gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
-+#define SDA_HI()  gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
-+#define SDA_EN()  gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
-+#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
-+
-+static int i2c_pld_write_byte(int address, int byte)
-+{
-+	int i;
-+
-+	address = (address << 1) & ~0x1;
-+
-+	SDA_HI();
-+	SDA_EN();
-+	SCL_EN();
-+	SCL_HI();
-+	SDA_LO();
-+	SCL_LO();
-+
-+	for (i = 7; i >= 0; i--)
-+	{
-+		if (address & (1 << i))
-+			SDA_HI();
-+		else
-+			SDA_LO();
-+
-+		SCL_HI();
-+		SCL_LO();
-+	}
-+
-+	SDA_DIS();
-+	SCL_HI();
-+	SDA_IN(i);
-+	SCL_LO();
-+	SDA_EN();
-+
-+	for (i = 7; i >= 0; i--)
-+	{
-+		if (byte & (1 << i))
-+      SDA_HI();
-+		else
-+			SDA_LO();
-+		SCL_HI();
-+		SCL_LO();
-+	}
-+
-+	SDA_DIS();
-+	SCL_HI();
-+	SDA_IN(i);
-+	SCL_LO();
-+
-+	SDA_HI();
-+	SDA_EN();
-+
-+	SDA_LO();
-+	SCL_HI();
-+	SDA_HI();
-+	SCL_LO();
-+	SCL_HI();
-+
-+	return 0;
-+}
-+
-+static unsigned int i2c_pld_read_byte(int address)
-+{
-+	int i = 0, byte = 0;
-+	int bit;
-+
-+	address = (address << 1) | 0x1;
-+
-+	SDA_HI();
-+	SDA_EN();
-+	SCL_EN();
-+	SCL_HI();
-+	SDA_LO();
-+	SCL_LO();
-+
-+	for (i = 7; i >= 0; i--)
-+	{
-+		if (address & (1 << i))
-+			SDA_HI();
-+		else
-+			SDA_LO();
-+
-+		SCL_HI();
-+		SCL_LO();
-+	}
-+
-+	SDA_DIS();
-+	SCL_HI();
-+	SDA_IN(i);
-+	SCL_LO();
-+	SDA_EN();
-+
-+	SDA_DIS();
-+	for (i = 7; i >= 0; i--)
-+	{
-+		SCL_HI();
-+		SDA_IN(bit);
-+		byte |= bit << i;
-+		SCL_LO();
-+	}
-+
-+	SDA_LO();
-+	SCL_HI();
-+	SDA_HI();
-+	SCL_LO();
-+	SCL_HI();
-+
-+	return byte;
-+}
-+
-+
-+static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
-+{
-+	int ret;
-+	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+	struct i2c_adapter *adap = gpio->client->adapter;
-+
-+	if (in_atomic() || irqs_disabled()) {
-+		ret = rt_mutex_trylock(&adap->bus_lock);
-+		if (!ret)
-+			/* I2C activity is ongoing. */
-+			return -EAGAIN;
-+	} else {
-+		rt_mutex_lock(&adap->bus_lock);
-+	}
-+
-+	gpio->out |= (1 << offset);
-+
-+	ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+	rt_mutex_unlock(&adap->bus_lock);
-+
-+	return ret;
-+}
-+
-+static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
-+{
-+	int ret;
-+	s32	value;
-+	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+	struct i2c_adapter *adap = gpio->client->adapter;
-+
-+	if (in_atomic() || irqs_disabled()) {
-+		ret = rt_mutex_trylock(&adap->bus_lock);
-+		if (!ret)
-+			/* I2C activity is ongoing. */
-+			return -EAGAIN;
-+	} else {
-+		rt_mutex_lock(&adap->bus_lock);
-+	}
-+
-+	value = i2c_pld_read_byte(gpio->client->addr);
-+
-+	rt_mutex_unlock(&adap->bus_lock);
-+
-+	return (value < 0) ? 0 : (value & (1 << offset));
-+}
-+
-+static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+	int ret;
-+
-+	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+	struct i2c_adapter *adap = gpio->client->adapter;
-+
-+	unsigned bit = 1 << offset;
-+
-+	if (in_atomic() || irqs_disabled()) {
-+		ret = rt_mutex_trylock(&adap->bus_lock);
-+		if (!ret)
-+			/* I2C activity is ongoing. */
-+			return -EAGAIN;
-+	} else {
-+		rt_mutex_lock(&adap->bus_lock);
-+	}
-+
-+
-+	if (value)
-+		gpio->out |= bit;
-+	else
-+		gpio->out &= ~bit;
-+
-+	ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+	rt_mutex_unlock(&adap->bus_lock);
-+
-+	return ret;
-+}
-+
-+static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+	gw_i2c_pld_output8(chip, offset, value);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int gw_i2c_pld_probe(struct i2c_client *client,
-+			 const struct i2c_device_id *id)
-+{
-+	struct gw_i2c_pld_platform_data	*pdata;
-+	struct gw_i2c_pld *gpio;
-+	int status;
-+
-+	pdata = client->dev.platform_data;
-+	if (!pdata)
-+		return -ENODEV;
-+
-+	/* Allocate, initialize, and register this gpio_chip. */
-+	gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
-+	if (!gpio)
-+		return -ENOMEM;
-+
-+	gpio->chip.base = pdata->gpio_base;
-+	gpio->chip.can_sleep = 1;
-+	gpio->chip.dev = &client->dev;
-+	gpio->chip.owner = THIS_MODULE;
-+
-+	gpio->chip.ngpio = pdata->nr_gpio;
-+	gpio->chip.direction_input = gw_i2c_pld_input8;
-+	gpio->chip.get = gw_i2c_pld_get8;
-+	gpio->chip.direction_output = gw_i2c_pld_output8;
-+	gpio->chip.set = gw_i2c_pld_set8;
-+
-+	gpio->chip.label = client->name;
-+
-+	gpio->client = client;
-+	i2c_set_clientdata(client, gpio);
-+
-+	gpio->out = 0xFF;
-+
-+	status = gpiochip_add(&gpio->chip);
-+	if (status < 0)
-+		goto fail;
-+
-+	dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
-+			gpio->chip.base,
-+			gpio->chip.base + gpio->chip.ngpio - 1,
-+			client->name,
-+			client->irq ? " (irq ignored)" : "");
-+
-+	/* Let platform code set up the GPIOs and their users.
-+	 * Now is the first time anyone could use them.
-+	 */
-+	if (pdata->setup) {
-+		status = pdata->setup(client,
-+				gpio->chip.base, gpio->chip.ngpio,
-+				pdata->context);
-+		if (status < 0)
-+			dev_warn(&client->dev, "setup --> %d\n", status);
-+	}
-+
-+	return 0;
-+
-+fail:
-+	dev_dbg(&client->dev, "probe error %d for '%s'\n",
-+			status, client->name);
-+	kfree(gpio);
-+	return status;
-+}
-+
-+static int gw_i2c_pld_remove(struct i2c_client *client)
-+{
-+	struct gw_i2c_pld_platform_data	*pdata = client->dev.platform_data;
-+	struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
-+	int				status = 0;
-+
-+	if (pdata->teardown) {
-+		status = pdata->teardown(client,
-+				gpio->chip.base, gpio->chip.ngpio,
-+				pdata->context);
-+		if (status < 0) {
-+			dev_err(&client->dev, "%s --> %d\n",
-+					"teardown", status);
-+			return status;
-+		}
-+	}
-+
-+	gpiochip_remove(&gpio->chip);
-+	kfree(gpio);
-+	return 0;
-+}
-+
-+static struct i2c_driver gw_i2c_pld_driver = {
-+	.driver = {
-+		.name	= "gw_i2c_pld",
-+		.owner	= THIS_MODULE,
-+	},
-+	.probe	= gw_i2c_pld_probe,
-+	.remove	= gw_i2c_pld_remove,
-+	.id_table = gw_i2c_pld_id,
-+};
-+
-+static int __init gw_i2c_pld_init(void)
-+{
-+	return i2c_add_driver(&gw_i2c_pld_driver);
-+}
-+module_init(gw_i2c_pld_init);
-+
-+static void __exit gw_i2c_pld_exit(void)
-+{
-+	i2c_del_driver(&gw_i2c_pld_driver);
-+}
-+module_exit(gw_i2c_pld_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chris Lang");
---- /dev/null
-+++ b/include/linux/i2c/gw_i2c_pld.h
-@@ -0,0 +1,20 @@
-+#ifndef __LINUX_GW_I2C_PLD_H
-+#define __LINUX_GW_I2C_PLD_H
-+
-+/**
-+ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
-+ */
-+
-+struct gw_i2c_pld_platform_data {
-+	unsigned gpio_base;
-+	unsigned nr_gpio;
-+	int		(*setup)(struct i2c_client *client,
-+					int gpio, unsigned ngpio,
-+					void *context);
-+	int		(*teardown)(struct i2c_client *client,
-+					int gpio, unsigned ngpio,
-+					void *context);
-+	void		*context;
-+};
-+
-+#endif /* __LINUX_GW_I2C_PLD_H */
diff --git a/target/linux/ixp4xx/patches-4.9/030-gpio_line_config.patch b/target/linux/ixp4xx/patches-4.9/030-gpio_line_config.patch
deleted file mode 100644
index 0e51793273..0000000000
--- a/target/linux/ixp4xx/patches-4.9/030-gpio_line_config.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- a/arch/arm/mach-ixp4xx/common.c
-+++ b/arch/arm/mach-ixp4xx/common.c
-@@ -93,22 +93,7 @@ void __init ixp4xx_map_io(void)
- /*
-  * GPIO-functions
-  */
--/*
-- * The following converted to the real HW bits the gpio_line_config
-- */
--/* GPIO pin types */
--#define IXP4XX_GPIO_OUT 		0x1
--#define IXP4XX_GPIO_IN  		0x2
--
--/* GPIO signal types */
--#define IXP4XX_GPIO_LOW			0
--#define IXP4XX_GPIO_HIGH		1
--
--/* GPIO Clocks */
--#define IXP4XX_GPIO_CLK_0		14
--#define IXP4XX_GPIO_CLK_1		15
--
--static void gpio_line_config(u8 line, u32 direction)
-+void gpio_line_config(u8 line, u32 direction)
- {
- 	if (direction == IXP4XX_GPIO_IN)
- 		*IXP4XX_GPIO_GPOER |= (1 << line);
-@@ -116,17 +101,17 @@ static void gpio_line_config(u8 line, u3
- 		*IXP4XX_GPIO_GPOER &= ~(1 << line);
- }
- 
--static void gpio_line_get(u8 line, int *value)
-+void gpio_line_get(u8 line, int *value)
- {
- 	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
- }
- 
--static void gpio_line_set(u8 line, int value)
-+void gpio_line_set(u8 line, int value)
- {
--	if (value == IXP4XX_GPIO_HIGH)
--	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
--	else if (value == IXP4XX_GPIO_LOW)
-+	if (value == IXP4XX_GPIO_LOW)
- 	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-+	else
-+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
- }
- 
- /*************************************************************************
---- a/arch/arm/mach-ixp4xx/include/mach/platform.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
-@@ -131,5 +131,21 @@ struct pci_sys_data;
- extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
- extern struct pci_ops ixp4xx_ops;
- 
-+/* GPIO pin types */
-+#define IXP4XX_GPIO_OUT 		0x1
-+#define IXP4XX_GPIO_IN  		0x2
-+
-+/* GPIO signal types */
-+#define IXP4XX_GPIO_LOW			0
-+#define IXP4XX_GPIO_HIGH		1
-+
-+/* GPIO Clocks */
-+#define IXP4XX_GPIO_CLK_0		14
-+#define IXP4XX_GPIO_CLK_1		15
-+
-+void gpio_line_config(u8 line, u32 direction);
-+void gpio_line_get(u8 line, int *value);
-+void gpio_line_set(u8 line, int value);
-+
- #endif // __ASSEMBLY__
- 
diff --git a/target/linux/ixp4xx/patches-4.9/040-arm_mach_types.patch b/target/linux/ixp4xx/patches-4.9/040-arm_mach_types.patch
deleted file mode 100644
index c6392ef2f8..0000000000
--- a/target/linux/ixp4xx/patches-4.9/040-arm_mach_types.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1006,3 +1006,15 @@ eco5_bx2		MACH_ECO5_BX2		ECO5_BX2		4572
- eukrea_cpuimx28sd	MACH_EUKREA_CPUIMX28SD	EUKREA_CPUIMX28SD	4573
- domotab			MACH_DOMOTAB		DOMOTAB			4574
- pfla03			MACH_PFLA03		PFLA03			4575
-+wg302v1			MACH_WG302V1		WG302V1			889
-+pronghorn		MACH_PRONGHORN		PRONGHORN		928
-+pronghorn_metro		MACH_PRONGHORNMETRO	PRONGHORNMETRO		1040
-+sidewinder		MACH_SIDEWINDER		SIDEWINDER		1041
-+wrt300nv2		MACH_WRT300NV2		WRT300NV2		1077
-+compex42x		MACH_COMPEXWP18		COMPEXWP18		1273
-+cambria			MACH_CAMBRIA		CAMBRIA			1468
-+ap1000			MACH_AP1000		AP1000			1543
-+tw2662			MACH_TW2662		TW2662			1658
-+tw5334			MACH_TW5334		TW5334			1664
-+usr8200			MACH_USR8200		USR8200			1762
-+mi424wr			MACH_MI424WR		MI424WR			1778
diff --git a/target/linux/ixp4xx/patches-4.9/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-4.9/090-increase_entropy_pools.patch
deleted file mode 100644
index 9da213911e..0000000000
--- a/target/linux/ixp4xx/patches-4.9/090-increase_entropy_pools.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -279,11 +279,11 @@
- /*
-  * Configuration information
-  */
--#define INPUT_POOL_SHIFT	12
-+#define INPUT_POOL_SHIFT	13
- #define INPUT_POOL_WORDS	(1 << (INPUT_POOL_SHIFT-5))
--#define OUTPUT_POOL_SHIFT	10
-+#define OUTPUT_POOL_SHIFT	11
- #define OUTPUT_POOL_WORDS	(1 << (OUTPUT_POOL_SHIFT-5))
--#define SEC_XFER_SIZE		512
-+#define SEC_XFER_SIZE		1024
- #define EXTRACT_SIZE		10
- 
- #define DEBUG_RANDOM_BOOT 0
diff --git a/target/linux/ixp4xx/patches-4.9/100-wg302v2_gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/100-wg302v2_gateway7001_mac_plat_info.patch
deleted file mode 100644
index 317103fdab..0000000000
--- a/target/linux/ixp4xx/patches-4.9/100-wg302v2_gateway7001_mac_plat_info.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -17,6 +17,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
- 
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -75,9 +76,37 @@ static struct platform_device gateway700
- 	.resource	= &gateway7001_uart_resource,
- };
- 
-+static struct eth_plat_info gateway7001_plat_eth[] = {
-+	{
-+		.phy		= 1,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}, {
-+		.phy		= 2,
-+		.rxq		= 4,
-+		.txreadyq	= 21,
-+	}
-+};
-+
-+static struct platform_device gateway7001_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= gateway7001_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= gateway7001_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- 	&gateway7001_flash,
--	&gateway7001_uart
-+	&gateway7001_uart,
-+	&gateway7001_eth[0],
-+	&gateway7001_eth[1],
- };
- 
- static void __init gateway7001_init(void)
---- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -76,9 +76,26 @@ static struct platform_device wg302v2_ua
- 	.resource	= &wg302v2_uart_resource,
- };
- 
-+static struct eth_plat_info wg302v2_plat_eth[] = {
-+	{
-+		.phy		= 8,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}
-+};
-+
-+static struct platform_device wg302v2_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= wg302v2_plat_eth,
-+	}
-+};
-+
- static struct platform_device *wg302v2_devices[] __initdata = {
- 	&wg302v2_flash,
- 	&wg302v2_uart,
-+	&wg302v2_eth[0],
- };
- 
- static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-4.9/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-4.9/105-wg302v1_support.patch
deleted file mode 100644
index 8793549c64..0000000000
--- a/target/linux/ixp4xx/patches-4.9/105-wg302v1_support.patch
+++ /dev/null
@@ -1,261 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -13,6 +13,7 @@ CONFIG_MACH_AVILA=y
- CONFIG_MACH_LOFT=y
- CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
-+CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -45,6 +45,14 @@ config MACH_GATEWAY7001
- 	  7001 Access Point. For more information on this platform,
- 	  see http://openwrt.org
- 
-+config MACH_WG302V1
-+	bool "Netgear WG302 v1 / WAG302 v1"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support Netgear's
-+	  WG302 v1 or WAG302 v1 Access Points. For more information
-+	  on this platform, see http://openwrt.org
-+
- config MACH_WG302V2
- 	bool "Netgear WG302 v2 / WAG302 v2"
- 	select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-p
- obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
-+obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.
- obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
- obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
- obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
-+obj-$(CONFIG_MACH_WG302V1)	+= wg302v1-setup.o
- obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
-+ *
-+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init wg302v1_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init wg302v1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 1)
-+		return IRQ_IXP4XX_GPIO8;
-+	else if (slot == 2)
-+		return IRQ_IXP4XX_GPIO10;
-+	else
-+		return -1;
-+}
-+
-+struct hw_pci wg302v1_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit =        wg302v1_pci_preinit,
-+	.ops =            &ixp4xx_ops,
-+	.setup =          ixp4xx_setup,
-+	.map_irq =        wg302v1_map_irq,
-+};
-+
-+int __init wg302v1_pci_init(void)
-+{
-+	if (machine_is_wg302v1())
-+		pci_common_init(&wg302v1_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(wg302v1_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,147 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
-+ *
-+ * Board setup for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wg302v1_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource wg302v1_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wg302v1_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &wg302v1_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &wg302v1_flash_resource,
-+};
-+
-+static struct resource wg302v1_uart_resources[] = {
-+	{
-+		.start	= IXP4XX_UART1_BASE_PHYS,
-+		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.start	= IXP4XX_UART2_BASE_PHYS,
-+		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	}
-+};
-+
-+static struct plat_serial8250_port wg302v1_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device wg302v1_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev			= {
-+		.platform_data	= wg302v1_uart_data,
-+	},
-+	.num_resources	= 2,
-+	.resource	= wg302v1_uart_resources,
-+};
-+
-+static struct eth_plat_info wg302v1_plat_eth[] = {
-+	{
-+		.phy		= 30,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}
-+};
-+
-+static struct platform_device wg302v1_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= wg302v1_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct platform_device *wg302v1_devices[] __initdata = {
-+	&wg302v1_flash,
-+	&wg302v1_uart,
-+	&wg302v1_eth[0],
-+};
-+
-+static void __init wg302v1_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+	platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WG302V1
-+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.fixup		= wg302v1_fixup,
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= wg302v1_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-4.9/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-4.9/110-pronghorn_series_support.patch
deleted file mode 100644
index d1fdfcba49..0000000000
--- a/target/linux/ixp4xx/patches-4.9/110-pronghorn_series_support.patch
+++ /dev/null
@@ -1,393 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -15,6 +15,8 @@ CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
- CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
-+CONFIG_MACH_PRONGHORN=y
-+CONFIG_MACH_PRONGHORNMETRO=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
- CONFIG_MACH_IXDP465=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -61,6 +61,22 @@ config MACH_WG302V2
- 	  WG302 v2 or WAG302 v2 Access Points. For more information
- 	  on this platform, see http://openwrt.org
- 
-+config MACH_PRONGHORN
-+	bool "ADI Pronghorn series"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support the ADI
-+	  Engineering Pronghorn series. For more
-+	  information on this platform, see http://www.adiengineering.com
-+
-+#
-+# There're only minimal differences kernel-wise between the Pronghorn and
-+# Pronghorn Metro boards - they use different chip selects to drive the
-+# CF slot connected to the expansion bus, so we just enable them together.
-+#
-+config MACH_PRONGHORNMETRO
-+	def_bool MACH_PRONGHORN
-+
- config ARCH_IXDP425
- 	bool "IXDP425"
- 	help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302
- obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
-+obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
- 
- obj-y	+= common.o
- 
-@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-se
- obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
- obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
-+obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
- 	 */
- 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- 	    machine_is_gateway7001() || machine_is_wg302v2() ||
--	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
-+	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
-+	    machine_is_pronghorn() || machine_is_pronghorn_metro())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-pci.c
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghorn-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init pronghorn_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init pronghorn_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 13)
-+		return IRQ_IXP4XX_GPIO4;
-+	else if (slot == 14)
-+		return IRQ_IXP4XX_GPIO6;
-+	else if (slot == 15)
-+		return IRQ_IXP4XX_GPIO11;
-+	else if (slot == 16)
-+		return IRQ_IXP4XX_GPIO1;
-+	else
-+		return -1;
-+}
-+
-+struct hw_pci pronghorn_pci __initdata = {
-+	.nr_controllers	= 1,
-+	.preinit	= pronghorn_pci_preinit,
-+	.ops		= &ixp4xx_ops,
-+	.setup		= ixp4xx_setup,
-+	.map_irq	= pronghorn_map_irq,
-+};
-+
-+int __init pronghorn_pci_init(void)
-+{
-+	if (machine_is_pronghorn() || machine_is_pronghorn_metro())
-+		pci_common_init(&pronghorn_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(pronghorn_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -0,0 +1,252 @@
-+/*
-+ * arch/arm/mach-ixp4xx/pronghorn-setup.c
-+ *
-+ * Board setup for the ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data pronghorn_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource pronghorn_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device pronghorn_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &pronghorn_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &pronghorn_flash_resource,
-+};
-+
-+static struct resource pronghorn_uart_resources [] = {
-+	{
-+		.start		= IXP4XX_UART1_BASE_PHYS,
-+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	},
-+	{
-+		.start		= IXP4XX_UART2_BASE_PHYS,
-+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	}
-+};
-+
-+static struct plat_serial8250_port pronghorn_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device pronghorn_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev		= {
-+		.platform_data	= pronghorn_uart_data,
-+	},
-+	.num_resources	= 2,
-+	.resource	= pronghorn_uart_resources,
-+};
-+
-+static struct i2c_gpio_platform_data pronghorn_i2c_gpio_data = {
-+	.sda_pin	= 9,
-+	.scl_pin	= 10,
-+};
-+
-+static struct platform_device pronghorn_i2c_gpio = {
-+	.name		= "i2c-gpio",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &pronghorn_i2c_gpio_data,
-+	},
-+};
-+
-+static struct gpio_led pronghorn_led_pin[] = {
-+	{
-+		.name		= "pronghorn:green:status",
-+		.gpio		= 7,
-+	}
-+};
-+
-+static struct gpio_led_platform_data pronghorn_led_data = {
-+	.num_leds		= 1,
-+	.leds			= pronghorn_led_pin,
-+};
-+
-+static struct platform_device pronghorn_led = {
-+	.name			= "leds-gpio",
-+	.id			= -1,
-+	.dev.platform_data	= &pronghorn_led_data,
-+};
-+
-+static struct resource pronghorn_pata_resources[] = {
-+	{
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= "intrq",
-+		.start	= IRQ_IXP4XX_GPIO0,
-+		.end	= IRQ_IXP4XX_GPIO0,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct ixp4xx_pata_data pronghorn_pata_data = {
-+	.cs0_bits	= 0xbfff0043,
-+	.cs1_bits	= 0xbfff0043,
-+};
-+
-+static struct platform_device pronghorn_pata = {
-+	.name			= "pata_ixp4xx_cf",
-+	.id			= 0,
-+	.dev.platform_data      = &pronghorn_pata_data,
-+	.num_resources		= ARRAY_SIZE(pronghorn_pata_resources),
-+	.resource		= pronghorn_pata_resources,
-+};
-+
-+static struct eth_plat_info pronghorn_plat_eth[] = {
-+	{
-+		.phy		= 0,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}, {
-+		.phy		= 1,
-+		.rxq		= 4,
-+		.txreadyq	= 21,
-+	}
-+};
-+
-+static struct platform_device pronghorn_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= pronghorn_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= pronghorn_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct platform_device *pronghorn_devices[] __initdata = {
-+	&pronghorn_flash,
-+	&pronghorn_uart,
-+	&pronghorn_led,
-+	&pronghorn_eth[0],
-+	&pronghorn_eth[1],
-+};
-+
-+static void __init pronghorn_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+	platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
-+
-+	if (machine_is_pronghorn()) {
-+		pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
-+		pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
-+
-+		pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
-+		pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
-+
-+		pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
-+		pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+	} else {
-+		pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
-+		pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
-+
-+		pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
-+		pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
-+
-+		pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+		pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
-+
-+		platform_device_register(&pronghorn_i2c_gpio);
-+	}
-+
-+	platform_device_register(&pronghorn_pata);
-+}
-+
-+MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= pronghorn_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
-+
-+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= pronghorn_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.9/111-pronghorn_swap_uarts.patch b/target/linux/ixp4xx/patches-4.9/111-pronghorn_swap_uarts.patch
deleted file mode 100644
index ed9f7a785d..0000000000
--- a/target/linux/ixp4xx/patches-4.9/111-pronghorn_swap_uarts.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -52,31 +52,31 @@ static struct platform_device pronghorn_
- 
- static struct resource pronghorn_uart_resources [] = {
- 	{
--		.start		= IXP4XX_UART1_BASE_PHYS,
--		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.start		= IXP4XX_UART2_BASE_PHYS,
-+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
- 		.flags		= IORESOURCE_MEM
- 	},
- 	{
--		.start		= IXP4XX_UART2_BASE_PHYS,
--		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.start		= IXP4XX_UART1_BASE_PHYS,
-+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
- 		.flags		= IORESOURCE_MEM
- 	}
- };
- 
- static struct plat_serial8250_port pronghorn_uart_data[] = {
- 	{
--		.mapbase	= IXP4XX_UART1_BASE_PHYS,
--		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
--		.irq		= IRQ_IXP4XX_UART1,
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
- 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- 		.iotype		= UPIO_MEM,
- 		.regshift	= 2,
- 		.uartclk	= IXP4XX_UART_XTAL,
- 	},
- 	{
--		.mapbase	= IXP4XX_UART2_BASE_PHYS,
--		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
--		.irq		= IRQ_IXP4XX_UART2,
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
- 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- 		.iotype		= UPIO_MEM,
- 		.regshift	= 2,
diff --git a/target/linux/ixp4xx/patches-4.9/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-4.9/115-sidewinder_support.patch
deleted file mode 100644
index 20adbb5c04..0000000000
--- a/target/linux/ixp4xx/patches-4.9/115-sidewinder_support.patch
+++ /dev/null
@@ -1,286 +0,0 @@
-From 95dac4a842a3c66f69f949b48f9075e16275f77b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Jun 2013 15:48:47 +0200
-Subject: [PATCH 07/36] 115-sidewinder_support.patch
-
----
- arch/arm/mach-ixp4xx/Kconfig            |   10 +-
- arch/arm/mach-ixp4xx/Makefile           |    2 +
- arch/arm/mach-ixp4xx/sidewinder-pci.c   |   68 ++++++++++++++
- arch/arm/mach-ixp4xx/sidewinder-setup.c |  151 +++++++++++++++++++++++++++++++
- 4 files changed, 230 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-pci.c
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-setup.c
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -77,6 +77,14 @@ config MACH_PRONGHORN
- config MACH_PRONGHORNMETRO
- 	def_bool MACH_PRONGHORN
- 
-+config MACH_SIDEWINDER
-+	bool "ADI Sidewinder"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support the ADI 
-+	  Engineering Sidewinder board. For more information on this
-+	  platform, see http://www.adiengineering.com
-+
- config ARCH_IXDP425
- 	bool "IXDP425"
- 	help
-@@ -173,7 +181,7 @@ config MACH_ARCOM_VULCAN
- #
- config CPU_IXP46X
- 	bool
--	depends on MACH_IXDP465
-+	depends on MACH_IXDP465 || MACH_SIDEWINDER
- 	default y
- 
- config CPU_IXP43X
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302
- obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
-+obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
- 
- obj-y	+= common.o
- 
-@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
- obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
- obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
-+obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init sidewinder_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init sidewinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 1)
-+		return IRQ_IXP4XX_GPIO11;
-+	else if (slot == 2)
-+		return IRQ_IXP4XX_GPIO10;
-+	else if (slot == 3)
-+		return IRQ_IXP4XX_GPIO9;
-+	else
-+		return -1;
-+}
-+
-+struct hw_pci sidewinder_pci __initdata = {
-+	.nr_controllers	= 1,
-+	.preinit	= sidewinder_pci_preinit,
-+	.ops		= &ixp4xx_ops,
-+	.setup		= ixp4xx_setup,
-+	.map_irq	= sidewinder_map_irq,
-+};
-+
-+int __init sidewinder_pci_init(void)
-+{
-+	if (machine_is_sidewinder())
-+		pci_common_init(&sidewinder_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(sidewinder_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,155 @@
-+/*
-+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
-+ *
-+ * Board setup for the ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data sidewinder_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource sidewinder_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device sidewinder_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &sidewinder_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &sidewinder_flash_resource,
-+};
-+
-+static struct resource sidewinder_uart_resources[] = {
-+	{
-+		.start	= IXP4XX_UART1_BASE_PHYS,
-+		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.start	= IXP4XX_UART2_BASE_PHYS,
-+		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	}
-+};
-+
-+static struct plat_serial8250_port sidewinder_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device sidewinder_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev		= {
-+		.platform_data	= sidewinder_uart_data,
-+	},
-+	.num_resources	= ARRAY_SIZE(sidewinder_uart_resources),
-+	.resource	= sidewinder_uart_resources,
-+};
-+
-+static struct eth_plat_info sidewinder_plat_eth[] = {
-+	{
-+		.phy		= 5,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}, {
-+		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+		.phy_mask	= 0x1e,
-+		.rxq		= 4,
-+		.txreadyq	= 21,
-+	}, {
-+		.phy		= 31,
-+		.rxq		= 2,
-+		.txreadyq	= 19,
-+	}
-+};
-+
-+static struct platform_device sidewinder_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= sidewinder_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= sidewinder_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEA,
-+		.dev.platform_data	= sidewinder_plat_eth + 2,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct platform_device *sidewinder_devices[] __initdata = {
-+	&sidewinder_flash,
-+	&sidewinder_uart,
-+	&sidewinder_eth[0],
-+	&sidewinder_eth[1],
-+	&sidewinder_eth[2],
-+};
-+
-+static void __init sidewinder_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+	platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
-+}
-+
-+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= sidewinder_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.9/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-4.9/116-sidewinder_fis_location.patch
deleted file mode 100644
index 8a28eb0a7a..0000000000
--- a/target/linux/ixp4xx/patches-4.9/116-sidewinder_fis_location.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -31,6 +31,8 @@
- #include <linux/module.h>
- #include <linux/mod_devicetable.h>
- 
-+#include <asm/mach-types.h>
-+
- struct fis_image_desc {
-     unsigned char name[16];      // Null terminated name
-     uint32_t	  flash_base;    // Address within FLASH of image
-@@ -48,7 +50,8 @@ struct fis_list {
- 	struct fis_list *next;
- };
- 
--static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+
- module_param(directory, int, 0);
- 
- static inline int redboot_checksum(struct fis_image_desc *img)
-@@ -76,6 +79,8 @@ static int parse_redboot_partitions(stru
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 	static char nullstring[] = "unallocated";
- #endif
-+	if (machine_is_sidewinder())
-+		directory = -5;
- 
- 	if ( directory < 0 ) {
- 		offset = master->size + directory * master->erasesize;
diff --git a/target/linux/ixp4xx/patches-4.9/120-compex_support.patch b/target/linux/ixp4xx/patches-4.9/120-compex_support.patch
deleted file mode 100644
index 2abc159f04..0000000000
--- a/target/linux/ixp4xx/patches-4.9/120-compex_support.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From 24025a2dcf1248079dd3019fac6ed955252d277f Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Mon, 14 Jul 2008 21:56:34 +0200
-Subject: [PATCH] Add support for the Compex WP18 / NP18A boards
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -85,6 +85,14 @@ config MACH_SIDEWINDER
- 	  Engineering Sidewinder board. For more information on this
- 	  platform, see http://www.adiengineering.com
- 
-+config MACH_COMPEXWP18
-+	bool "Compex WP18 / NP18A"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support Compex' 
-+	  WP18 or NP18A boards. For more information on this
-+	  platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-+
- config ARCH_IXDP425
- 	bool "IXDP425"
- 	help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
-+obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
- 
- obj-y	+= common.o
- 
-@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_
- obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
- obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
-+obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/compex42x-setup.c
-@@ -0,0 +1,141 @@
-+/*
-+ * arch/arm/mach-ixp4xx/compex-setup.c
-+ *
-+ * Compex WP18 / NP18A board-setup
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data compex42x_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource compex42x_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device compex42x_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &compex42x_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &compex42x_flash_resource,
-+};
-+
-+static struct resource compex42x_uart_resources[] = {
-+	{
-+		.start		= IXP4XX_UART1_BASE_PHYS,
-+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	},
-+	{
-+		.start		= IXP4XX_UART2_BASE_PHYS,
-+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	}
-+};
-+
-+static struct plat_serial8250_port compex42x_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device compex42x_uart = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev.platform_data	= compex42x_uart_data,
-+	.num_resources		= 2,
-+	.resource		= compex42x_uart_resources,
-+};
-+
-+static struct eth_plat_info compex42x_plat_eth[] = {
-+	{
-+		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+		.phy_mask	= 0xf0000,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}, {
-+		.phy		= 3,
-+		.rxq		= 4,
-+		.txreadyq	= 21,
-+	}
-+};
-+
-+static struct platform_device compex42x_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= compex42x_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= compex42x_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct platform_device *compex42x_devices[] __initdata = {
-+	&compex42x_flash,
-+	&compex42x_uart,
-+	&compex42x_eth[0],
-+	&compex42x_eth[1],
-+};
-+
-+static void __init compex42x_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	compex42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	compex42x_flash_resource.end =
-+		IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	platform_add_devices(compex42x_devices, ARRAY_SIZE(compex42x_devices));
-+}
-+
-+MACHINE_START(COMPEXWP18, "Compex WP18 / NP18A")
-+	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= compex42x_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -69,7 +69,8 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
--			machine_is_ixdp465() || machine_is_kixrp435())
-+			machine_is_ixdp465() || machine_is_kixrp435() ||
-+			machine_is_compex42x())
- 		pci_common_init(&ixdp425_pci);
- 	return 0;
- }
diff --git a/target/linux/ixp4xx/patches-4.9/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-4.9/130-wrt300nv2_support.patch
deleted file mode 100644
index 49359be447..0000000000
--- a/target/linux/ixp4xx/patches-4.9/130-wrt300nv2_support.patch
+++ /dev/null
@@ -1,227 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -93,6 +93,14 @@ config MACH_COMPEXWP18
- 	  WP18 or NP18A boards. For more information on this
- 	  platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
- 
-+config MACH_WRT300NV2
-+	bool "Linksys WRT300N v2"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support Linksys'
-+	  WRT300N v2 router. For more information on this
-+	  platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- 	bool "IXDP425"
- 	help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= v
- obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
- 
- obj-y	+= common.o
- 
-@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulca
- obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
-+obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -43,7 +43,8 @@ static __inline__ void __arch_decomp_set
- 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- 	    machine_is_gateway7001() || machine_is_wg302v2() ||
- 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
--	    machine_is_pronghorn() || machine_is_pronghorn_metro())
-+	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
-+	    machine_is_wrt300nv2())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-@@ -0,0 +1,64 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
-+ *
-+ * PCI setup routines for Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wrt300nv2_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init wrt300nv2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 1)
-+		return IRQ_IXP4XX_GPIO8;
-+	else return -1;
-+}
-+
-+struct hw_pci wrt300nv2_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit	= wrt300nv2_pci_preinit,
-+	.ops		= &ixp4xx_ops,
-+	.setup		= ixp4xx_setup,
-+	.map_irq	= wrt300nv2_map_irq,
-+};
-+
-+int __init wrt300nv2_pci_init(void)
-+{
-+	if (machine_is_wrt300nv2())
-+		pci_common_init(&wrt300nv2_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(wrt300nv2_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,110 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+ *
-+ * Board setup for the Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wrt300nv2_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource wrt300nv2_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wrt300nv2_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &wrt300nv2_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &wrt300nv2_flash_resource,
-+};
-+
-+static struct resource wrt300nv2_uart_resource = {
-+	.start	= IXP4XX_UART2_BASE_PHYS,
-+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device wrt300nv2_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev			= {
-+		.platform_data	= wrt300nv2_uart_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &wrt300nv2_uart_resource,
-+};
-+
-+static struct platform_device *wrt300nv2_devices[] __initdata = {
-+	&wrt300nv2_flash,
-+	&wrt300nv2_uart
-+};
-+
-+static void __init wrt300nv2_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WRT300NV2
-+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= wrt300nv2_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-4.9/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/131-wrt300nv2_mac_plat_info.patch
deleted file mode 100644
index 5debbf1072..0000000000
--- a/target/linux/ixp4xx/patches-4.9/131-wrt300nv2_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,38 @@ static struct platform_device wrt300nv2_
- 	.resource	= &wrt300nv2_uart_resource,
- };
- 
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wrt300nv2_plat_eth[] = {
-+	{
-+		.phy		= -1,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}, {
-+		.phy		= 1,
-+		.rxq		= 4,
-+		.txreadyq	= 21,
-+	}
-+};
-+
-+static struct platform_device wrt300nv2_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= wrt300nv2_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= wrt300nv2_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
- static struct platform_device *wrt300nv2_devices[] __initdata = {
- 	&wrt300nv2_flash,
--	&wrt300nv2_uart
-+	&wrt300nv2_uart,
-+	&wrt300nv2_eth[0],
-+	&wrt300nv2_eth[1],
- };
- 
- static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-4.9/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-4.9/132-wrt300nv2_mac_fix.patch
deleted file mode 100644
index 99db2673d0..0000000000
--- a/target/linux/ixp4xx/patches-4.9/132-wrt300nv2_mac_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -3,6 +3,7 @@
-  *
-  * Board setup for the Linksys WRT300N v2
-  *
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-  * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-  *
-  * based on coyote-setup.c:
-@@ -18,6 +19,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
- 
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
- /* Built-in 10/100 Ethernet MAC interfaces */
- static struct eth_plat_info wrt300nv2_plat_eth[] = {
- 	{
--		.phy		= -1,
-+		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+		.phy_mask	= 0x0F0000,
- 		.rxq		= 3,
- 		.txreadyq	= 20,
- 	}, {
-@@ -112,6 +115,10 @@ static struct platform_device *wrt300nv2
- 
- static void __init wrt300nv2_init(void)
- {
-+	uint8_t __iomem *f;
-+	int offset = 0;
-+	int i;
-+
- 	ixp4xx_sys_init();
- 
- 	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -121,6 +128,32 @@ static void __init wrt300nv2_init(void)
- 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
- 
- 	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+
-+	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
-+
-+	if (f) {
-+		for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
-+			if (i == 5)
-+				offset = 1;
-+			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#else
-+			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
-+			if (i == 5)
-+				offset = 1;
-+			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#endif
-+		}
-+		iounmap(f);
-+	}
-+
-+	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
-+		random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
-+	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
-+		memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
-+		wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
-+	}
- }
- 
- #ifdef CONFIG_MACH_WRT300NV2
diff --git a/target/linux/ixp4xx/patches-4.9/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-4.9/150-lanready_ap1000_support.patch
deleted file mode 100644
index fb5c3adb76..0000000000
--- a/target/linux/ixp4xx/patches-4.9/150-lanready_ap1000_support.patch
+++ /dev/null
@@ -1,201 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -101,6 +101,14 @@ config MACH_WRT300NV2
- 	  WRT300N v2 router. For more information on this
- 	  platform, see http://openwrt.org
- 
-+config MACH_AP1000
-+	bool "Lanready AP-1000"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support Lanready's
-+	  AP1000 board. For more information on this
-+	  platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- 	bool "IXDP425"
- 	help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pron
- obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
-+obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
- 
- obj-y	+= common.o
- 
-@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghor
- obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
-+obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,152 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap1000-setup.c
-+ *
-+ * Lanready AP-1000
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data ap1000_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource ap1000_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device ap1000_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &ap1000_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &ap1000_flash_resource,
-+};
-+
-+static struct resource ap1000_uart_resources[] = {
-+	{
-+		.start		= IXP4XX_UART1_BASE_PHYS,
-+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	},
-+	{
-+		.start		= IXP4XX_UART2_BASE_PHYS,
-+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	}
-+};
-+
-+static struct plat_serial8250_port ap1000_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device ap1000_uart = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev.platform_data	= ap1000_uart_data,
-+	.num_resources		= 2,
-+	.resource		= ap1000_uart_resources
-+};
-+
-+static struct platform_device *ap1000_devices[] __initdata = {
-+	&ap1000_flash,
-+	&ap1000_uart
-+};
-+
-+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init ap1000_fixup(struct tag *tags, char **cmdline)
-+{
-+	struct tag *t = tags;
-+	char *p = *cmdline;
-+
-+	/* Find the end of the tags table, taking note of any cmdline tag. */
-+	for (; t->hdr.size; t = tag_next(t)) {
-+		if (t->hdr.tag == ATAG_CMDLINE) {
-+			p = t->u.cmdline.cmdline;
-+		}
-+	}
-+
-+	/* Overwrite the end of the table with a new cmdline tag. */
-+	t->hdr.tag = ATAG_CMDLINE;
-+	t->hdr.size = (sizeof (struct tag_header) +
-+		strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+	strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
-+	strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
-+		COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
-+
-+	/* Terminate the table. */
-+	t = tag_next(t);
-+	t->hdr.tag = ATAG_NONE;
-+	t->hdr.size = 0;
-+}
-+
-+static void __init ap1000_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	ap1000_flash_resource.end =
-+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+	platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP1000
-+MACHINE_START(AP1000, "Lanready AP-1000")
-+	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+	.fixup		= ap1000_fixup,
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= ap1000_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -70,7 +70,7 @@ int __init ixdp425_pci_init(void)
- {
- 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
- 			machine_is_ixdp465() || machine_is_kixrp435() ||
--			machine_is_compex42x())
-+			machine_is_compex42x() || machine_is_ap1000())
- 		pci_common_init(&ixdp425_pci);
- 	return 0;
- }
diff --git a/target/linux/ixp4xx/patches-4.9/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/151-lanready_ap1000_mac_plat_info.patch
deleted file mode 100644
index a3ed2d066e..0000000000
--- a/target/linux/ixp4xx/patches-4.9/151-lanready_ap1000_mac_plat_info.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -91,9 +91,39 @@ static struct platform_device ap1000_uar
- 	.resource		= ap1000_uart_resources
- };
- 
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ap1000_plat_eth[] = {
-+	{
-+		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+		.phy_mask	= 0x1e,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}, {
-+		.phy		= 5,
-+		.rxq		= 4,
-+		.txreadyq	= 21,
-+	}
-+};
-+
-+static struct platform_device ap1000_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= ap1000_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= ap1000_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
- static struct platform_device *ap1000_devices[] __initdata = {
--	&ap1000_flash,
--	&ap1000_uart
-+ 	&ap1000_flash,
-+	&ap1000_uart,
-+	&ap1000_eth[0],
-+	&ap1000_eth[1],
- };
- 
- static char ap1000_mem_fixup[] __initdata = "mem=64M ";
diff --git a/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch b/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
deleted file mode 100644
index 00a5309dcf..0000000000
--- a/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
+++ /dev/null
@@ -1,133 +0,0 @@
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -833,6 +833,7 @@ static int serial8250_probe(struct platf
- 		uart.port.get_mctrl	= p->get_mctrl;
- 		uart.port.pm		= p->pm;
- 		uart.port.dev		= &dev->dev;
-+		uart.port.rw_delay	= p->rw_delay;
- 		uart.port.irqflags	|= irqflag;
- 		ret = serial8250_register_8250_port(&uart);
- 		if (ret < 0) {
-@@ -989,6 +990,7 @@ int serial8250_register_8250_port(struct
- 		uart->bugs		= up->bugs;
- 		uart->port.mapbase      = up->port.mapbase;
- 		uart->port.mapsize      = up->port.mapsize;
-+		uart->port.rw_delay	= up->port.rw_delay;
- 		uart->port.private_data = up->port.private_data;
- 		uart->tx_loadsz		= up->tx_loadsz;
- 		uart->capabilities	= up->capabilities;
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -2260,6 +2260,7 @@ uart_report_port(struct uart_driver *drv
- 		snprintf(address, sizeof(address),
- 			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
- 		break;
-+	case UPIO_MEM_DELAY:
- 	case UPIO_MEM:
- 	case UPIO_MEM16:
- 	case UPIO_MEM32:
-@@ -2924,6 +2925,7 @@ int uart_match_port(struct uart_port *po
- 	case UPIO_HUB6:
- 		return (port1->iobase == port2->iobase) &&
- 		       (port1->hub6   == port2->hub6);
-+	case UPIO_MEM_DELAY:
- 	case UPIO_MEM:
- 	case UPIO_MEM16:
- 	case UPIO_MEM32:
---- a/include/linux/serial_8250.h
-+++ b/include/linux/serial_8250.h
-@@ -28,6 +28,7 @@ struct plat_serial8250_port {
- 	void            *private_data;
- 	unsigned char	regshift;	/* register shift */
- 	unsigned char	iotype;		/* UPIO_* */
-+	unsigned int rw_delay;	/* udelay for slower busses IXP4XX Expansion Bus */
- 	unsigned char	hub6;
- 	upf_t		flags;		/* UPF_* flags */
- 	unsigned int	type;		/* If UPF_FIXED_TYPE */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -152,6 +152,7 @@ struct uart_port {
- #define UPIO_TSI		(SERIAL_IO_TSI)		/* Tsi108/109 type IO */
- #define UPIO_MEM32BE		(SERIAL_IO_MEM32BE)	/* 32b big endian */
- #define UPIO_MEM16		(SERIAL_IO_MEM16)	/* 16b little endian */
-+#define UPIO_MEM_DELAY		(SERIAL_IO_MEM_DELAY)
- 
- 	unsigned int		read_status_mask;	/* driver specific */
- 	unsigned int		ignore_status_mask;	/* driver specific */
-@@ -233,6 +234,7 @@ struct uart_port {
- 	int			hw_stopped;		/* sw-assisted CTS flow state */
- 	unsigned int		mctrl;			/* current modem ctrl settings */
- 	unsigned int		timeout;		/* character-based timeout */
-+	unsigned int		rw_delay;		/* udelay for slow busses, IXP4XX Expansion Bus */
- 	unsigned int		type;			/* port type */
- 	const struct uart_ops	*ops;
- 	unsigned int		custom_divisor;
---- a/drivers/tty/serial/8250/8250_port.c
-+++ b/drivers/tty/serial/8250/8250_port.c
-@@ -383,6 +383,20 @@ static unsigned int mem16_serial_in(stru
- 	return readw(p->membase + offset);
- }
- 
-+static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
-+{
-+	struct uart_8250_port *up = (struct uart_8250_port *)p;
-+	udelay(up->port.rw_delay);
-+	return mem_serial_in(p, offset);
-+}
-+
-+static void memdelay_serial_out(struct uart_port *p, int offset, int value)
-+{
-+	struct uart_8250_port *up = (struct uart_8250_port *)p;
-+	udelay(up->port.rw_delay);
-+	mem_serial_out(p, offset, value);
-+}
-+
- static void mem32_serial_out(struct uart_port *p, int offset, int value)
- {
- 	offset = offset << p->regshift;
-@@ -455,6 +469,11 @@ static void set_io_from_upio(struct uart
- 		p->serial_out = mem32be_serial_out;
- 		break;
- 
-+	case UPIO_MEM_DELAY:
-+		p->serial_in = memdelay_serial_in;
-+		p->serial_out = memdelay_serial_out;
-+		break;
-+
- #ifdef CONFIG_SERIAL_8250_RT288X
- 	case UPIO_AU:
- 		p->serial_in = au_serial_in;
-@@ -482,6 +501,7 @@ serial_port_out_sync(struct uart_port *p
- 	case UPIO_MEM16:
- 	case UPIO_MEM32:
- 	case UPIO_MEM32BE:
-+	case UPIO_MEM_DELAY:
- 	case UPIO_AU:
- 		p->serial_out(p, offset, value);
- 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
-@@ -2759,6 +2779,7 @@ static int serial8250_request_std_resour
- 	case UPIO_MEM32BE:
- 	case UPIO_MEM16:
- 	case UPIO_MEM:
-+	case UPIO_MEM_DELAY:
- 		if (!port->mapbase)
- 			break;
- 
-@@ -2797,6 +2818,7 @@ static void serial8250_release_std_resou
- 	case UPIO_MEM32BE:
- 	case UPIO_MEM16:
- 	case UPIO_MEM:
-+	case UPIO_MEM_DELAY:
- 		if (!port->mapbase)
- 			break;
- 
---- a/include/uapi/linux/serial.h
-+++ b/include/uapi/linux/serial.h
-@@ -70,6 +70,7 @@ struct serial_struct {
- #define SERIAL_IO_TSI	  5
- #define SERIAL_IO_MEM32BE 6
- #define SERIAL_IO_MEM16	7
-+#define SERIAL_IO_MEM_DELAY 10
- 
- #define UART_CLEAR_FIFO		0x01
- #define UART_USE_FIFO		0x02
diff --git a/target/linux/ixp4xx/patches-4.9/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-4.9/162-wg302v1_mem_fixup.patch
deleted file mode 100644
index efa389d786..0000000000
--- a/target/linux/ixp4xx/patches-4.9/162-wg302v1_mem_fixup.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -117,6 +117,34 @@ static struct platform_device *wg302v1_d
- 	&wg302v1_eth[0],
- };
- 
-+static char wg302v1_mem_fixup[] __initdata = " mem=32M";
-+
-+static void __init wg302v1_fixup(struct tag *tags, char **cmdline)
-+{
-+	struct tag *t = tags;
-+	char *p = *cmdline;
-+	size_t fixlen, cmdlen;
-+
-+	/* Find the end of the tags table, taking note of any cmdline tag. */
-+	for (; t->hdr.size; t = tag_next(t)) {
-+		if (t->hdr.tag == ATAG_CMDLINE) {
-+			p = t->u.cmdline.cmdline;
-+		}
-+	}
-+
-+	fixlen = strlen(wg302v1_mem_fixup);
-+	cmdlen = strlen(p);
-+	if (fixlen + cmdlen >= COMMAND_LINE_SIZE)
-+		return;
-+
-+	/* append the fixup to the cmdline */
-+	memmove(p + cmdlen, wg302v1_mem_fixup, fixlen + 1);
-+
-+	/* Adjust the size of the atag if there was one */
-+	if (t->hdr.size)
-+		t->hdr.size += fixlen;
-+}
-+
- static void __init wg302v1_init(void)
- {
- 	ixp4xx_sys_init();
diff --git a/target/linux/ixp4xx/patches-4.9/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/170-ixdpg425_mac_plat_info.patch
deleted file mode 100644
index f7090cd1b4..0000000000
--- a/target/linux/ixp4xx/patches-4.9/170-ixdpg425_mac_plat_info.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/arm/mach-ixp4xx/coyote-setup.c
-+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -14,6 +14,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
- 
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -81,9 +82,39 @@ static struct platform_device coyote_uar
- 	.resource	= &coyote_uart_resource,
- };
- 
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdpg425_plat_eth[] = {
-+        {
-+                .phy            = 5,
-+                .rxq            = 3,
-+                .txreadyq       = 20,
-+        }, {
-+                .phy            = 4,
-+                .rxq            = 4,
-+                .txreadyq       = 21,
-+        }
-+};
-+
-+static struct platform_device ixdpg425_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= ixdpg425_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= ixdpg425_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+
- static struct platform_device *coyote_devices[] __initdata = {
- 	&coyote_flash,
--	&coyote_uart
-+	&coyote_uart,
-+	&ixdpg425_eth[0],
-+	&ixdpg425_eth[1],
- };
- 
- static void __init coyote_init(void)
diff --git a/target/linux/ixp4xx/patches-4.9/175-avila_hss_audio_support.patch b/target/linux/ixp4xx/patches-4.9/175-avila_hss_audio_support.patch
deleted file mode 100644
index 398344d188..0000000000
--- a/target/linux/ixp4xx/patches-4.9/175-avila_hss_audio_support.patch
+++ /dev/null
@@ -1,2093 +0,0 @@
---- a/sound/soc/Kconfig
-+++ b/sound/soc/Kconfig
-@@ -47,6 +47,7 @@ source "sound/soc/cirrus/Kconfig"
- source "sound/soc/davinci/Kconfig"
- source "sound/soc/dwc/Kconfig"
- source "sound/soc/fsl/Kconfig"
-+source "sound/soc/gw-avila/Kconfig"
- source "sound/soc/jz4740/Kconfig"
- source "sound/soc/nuc900/Kconfig"
- source "sound/soc/omap/Kconfig"
---- a/sound/soc/Makefile
-+++ b/sound/soc/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_SND_SOC)	+= cirrus/
- obj-$(CONFIG_SND_SOC)	+= davinci/
- obj-$(CONFIG_SND_SOC)	+= dwc/
- obj-$(CONFIG_SND_SOC)	+= fsl/
-+obj-$(CONFIG_SND_SOC)	+= gw-avila/
- obj-$(CONFIG_SND_SOC)	+= jz4740/
- obj-$(CONFIG_SND_SOC)	+= img/
- obj-$(CONFIG_SND_SOC)	+= intel/
---- /dev/null
-+++ b/sound/soc/gw-avila/Kconfig
-@@ -0,0 +1,17 @@
-+config SND_GW_AVILA_SOC_PCM
-+	tristate
-+
-+config SND_GW_AVILA_SOC_HSS
-+	tristate
-+
-+config SND_GW_AVILA_SOC
-+	tristate "SoC Audio for the Gateworks AVILA Family"
-+	depends on ARCH_IXP4XX && SND_SOC
-+	select SND_GW_AVILA_SOC_PCM
-+	select SND_GW_AVILA_SOC_HSS
-+	select SND_SOC_TLV320AIC3X
-+	help
-+	  Say Y or M if you want to add support for codecs attached to
-+	  the Gateworks HSS interface. You will also need
-+	  to select the audio interfaces to support below.
-+
---- /dev/null
-+++ b/sound/soc/gw-avila/Makefile
-@@ -0,0 +1,8 @@
-+# Gateworks Avila HSS Platform Support
-+snd-soc-gw-avila-objs := gw-avila.o ixp4xx_hss.o
-+snd-soc-gw-avila-pcm-objs := gw-avila-pcm.o
-+snd-soc-gw-avila-hss-objs := gw-avila-hss.o
-+
-+obj-$(CONFIG_SND_GW_AVILA_SOC) += snd-soc-gw-avila.o
-+obj-$(CONFIG_SND_GW_AVILA_SOC_PCM) += snd-soc-gw-avila-pcm.o
-+obj-$(CONFIG_SND_GW_AVILA_SOC_HSS) += snd-soc-gw-avila-hss.o
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-hss.c
-@@ -0,0 +1,103 @@
-+/*
-+ * gw-avila-hss.c -- HSS Audio Support for Gateworks Avila
-+ *
-+ * Author:	Chris Lang	<clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/delay.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/initval.h>
-+#include <sound/soc.h>
-+
-+#include <asm/irq.h>
-+#include <linux/mutex.h>
-+#include <linux/gpio.h>
-+
-+#include "ixp4xx_hss.h"
-+#include "gw-avila-hss.h"
-+
-+#define gw_avila_hss_suspend	NULL
-+#define gw_avila_hss_resume	NULL
-+
-+struct snd_soc_dai_driver gw_avila_hss_dai = {
-+	.playback = {
-+		.channels_min = 2,
-+		.channels_max = 2,
-+		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+			SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+			SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+			SNDRV_PCM_RATE_KNOT),
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
-+	.capture = {
-+		.channels_min = 2,
-+		.channels_max = 2,
-+		.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+			SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+			SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+			SNDRV_PCM_RATE_KNOT),
-+		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
-+};
-+
-+static const struct snd_soc_component_driver gw_avila_hss_component = {
-+	.name   = "gw_avila_hss",
-+};
-+
-+static int gw_avila_hss_probe(struct platform_device *pdev)
-+{
-+	int port = (pdev->id < 2) ? 0 : 1;
-+	int channel = (pdev->id % 2);
-+
-+	hss_handle[pdev->id] = hss_init(port, channel);
-+	if (!hss_handle[pdev->id]) {
-+		return -ENODEV;
-+	}
-+
-+	return snd_soc_register_component(&pdev->dev, &gw_avila_hss_component,
-+					  &gw_avila_hss_dai, 1);
-+}
-+
-+static int gw_avila_hss_remove(struct platform_device *pdev)
-+{
-+	snd_soc_unregister_component(&pdev->dev);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver gw_avila_hss_driver = {
-+	.probe    = gw_avila_hss_probe,
-+	.remove   = gw_avila_hss_remove,
-+	.driver   = {
-+		.name = "gw_avila_hss",
-+		.owner  = THIS_MODULE,
-+	}
-+};
-+
-+static int __init gw_avila_hss_init(void)
-+{
-+	return platform_driver_register(&gw_avila_hss_driver);
-+}
-+module_init(gw_avila_hss_init);
-+
-+static void __exit gw_avila_hss_exit(void)
-+{
-+	platform_driver_unregister(&gw_avila_hss_driver);
-+}
-+module_exit(gw_avila_hss_exit);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("HSS Audio Driver for Gateworks Avila");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-hss.h
-@@ -0,0 +1,12 @@
-+/*
-+ * Author: Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GW_AVILA_HSS_H
-+#define _GW_AVILA_HSS_H
-+
-+#endif
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-pcm.c
-@@ -0,0 +1,327 @@
-+/*
-+ * ALSA PCM interface for the TI DAVINCI processor
-+ *
-+ * Author:      Chris Lang, <clang@gateworks.com>
-+ * Copyright:   (C) 2009 Gateworks Corporation
-+ *
-+ * Based On:    davinci-evm.c, Author: Vladimir Barinov, <vbarinov@ru.mvista.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+
-+#include <asm/dma.h>
-+
-+#include "gw-avila-pcm.h"
-+#include "gw-avila-hss.h"
-+#include "ixp4xx_hss.h"
-+
-+#define GW_AVILA_PCM_DEBUG 0
-+#if GW_AVILA_PCM_DEBUG
-+#define DPRINTK(x...) printk(KERN_DEBUG x)
-+#else
-+#define DPRINTK(x...)
-+#endif
-+
-+static struct snd_pcm_hardware gw_avila_pcm_hardware = {
-+	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
-+		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
-+/*		 SNDRV_PCM_INFO_PAUSE),*/
-+	.formats = (SNDRV_PCM_FMTBIT_S16_LE),
-+	.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+		  SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+		  SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+		  SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+		  SNDRV_PCM_RATE_KNOT),
-+	.rate_min = 8000,
-+	.rate_max = 8000,
-+	.channels_min = 2,
-+	.channels_max = 2,
-+	.buffer_bytes_max = 64 * 1024, // All of the lines below may need to be changed
-+	.period_bytes_min = 128,
-+	.period_bytes_max = 4 * 1024,
-+	.periods_min = 16,
-+	.periods_max = 32,
-+	.fifo_size = 0,
-+};
-+
-+struct gw_avila_runtime_data {
-+	spinlock_t lock;
-+	int period;		/* current DMA period */
-+	int master_lch;		/* Master DMA channel */
-+	int slave_lch;		/* Slave DMA channel */
-+	struct gw_avila_pcm_dma_params *params;	/* DMA params */
-+};
-+
-+static void gw_avila_dma_irq(void *data)
-+{
-+	struct snd_pcm_substream *substream = data;
-+	snd_pcm_period_elapsed(substream);
-+}
-+
-+static int gw_avila_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	struct hss_device *hdev = runtime->private_data;
-+	int ret = 0;
-+
-+	switch (cmd) {
-+	case SNDRV_PCM_TRIGGER_START:
-+	case SNDRV_PCM_TRIGGER_RESUME:
-+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+			hss_tx_start(hdev);
-+		else
-+			hss_rx_start(hdev);
-+		break;
-+	case SNDRV_PCM_TRIGGER_STOP:
-+	case SNDRV_PCM_TRIGGER_SUSPEND:
-+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+			hss_tx_stop(hdev);
-+		else
-+			hss_rx_stop(hdev);
-+		break;
-+	default:
-+		ret = -EINVAL;
-+		break;
-+	}
-+	return ret;
-+}
-+
-+static int gw_avila_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	struct hss_device *hdev = runtime->private_data;
-+
-+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+		hss_set_tx_callback(hdev, gw_avila_dma_irq, substream);
-+		hss_config_tx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
-+	} else {
-+		hss_set_rx_callback(hdev, gw_avila_dma_irq, substream);
-+		hss_config_rx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
-+	}
-+
-+	return 0;
-+}
-+
-+static snd_pcm_uframes_t
-+gw_avila_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	struct hss_device *hdev = runtime->private_data;
-+
-+	unsigned int curr = 0;
-+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+		curr = hss_curr_offset_tx(hdev);
-+	else
-+		curr = hss_curr_offset_rx(hdev);
-+  return curr;
-+}
-+
-+static int gw_avila_pcm_open(struct snd_pcm_substream *substream)
-+{
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+
-+	snd_soc_set_runtime_hwparams(substream, &gw_avila_pcm_hardware);
-+
-+	if (hss_handle[cpu_dai->id] != NULL)
-+		runtime->private_data = hss_handle[cpu_dai->id];
-+	else {
-+		pr_err("hss_handle is NULL\n");
-+		return -1;
-+	}
-+
-+	hss_chan_open(hss_handle[cpu_dai->id]);
-+
-+	return 0;
-+}
-+
-+static int gw_avila_pcm_close(struct snd_pcm_substream *substream)
-+{
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+	struct hss_device *hdev = runtime->private_data;
-+
-+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+		memset(hdev->tx_buf, 0, runtime->buffer_size);
-+	} else
-+		memset(hdev->rx_buf, 0, runtime->buffer_size);
-+
-+	hss_chan_close(hdev);
-+
-+	return 0;
-+}
-+
-+static int gw_avila_pcm_hw_params(struct snd_pcm_substream *substream,
-+				 struct snd_pcm_hw_params *hw_params)
-+{
-+	return snd_pcm_lib_malloc_pages(substream,
-+					params_buffer_bytes(hw_params));
-+}
-+
-+static int gw_avila_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+	  memset(runtime->dma_area, 0, runtime->buffer_size);
-+
-+	return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int gw_avila_pcm_mmap(struct snd_pcm_substream *substream,
-+          struct vm_area_struct *vma)
-+{
-+	struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
-+						runtime->dma_area,
-+						runtime->dma_addr,
-+						runtime->dma_bytes);
-+}
-+
-+struct snd_pcm_ops gw_avila_pcm_ops = {
-+	.open = 	gw_avila_pcm_open,
-+	.close = 	gw_avila_pcm_close,
-+	.ioctl = 	snd_pcm_lib_ioctl,
-+	.hw_params = 	gw_avila_pcm_hw_params,
-+	.hw_free = 	gw_avila_pcm_hw_free,
-+	.prepare = 	gw_avila_pcm_prepare,
-+	.trigger = 	gw_avila_pcm_trigger,
-+	.pointer = 	gw_avila_pcm_pointer,
-+	.mmap = gw_avila_pcm_mmap,
-+};
-+
-+static int gw_avila_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-+{
-+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-+	struct snd_dma_buffer *buf = &substream->dma_buffer;
-+	size_t size = gw_avila_pcm_hardware.buffer_bytes_max;
-+
-+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
-+	buf->dev.dev = pcm->card->dev;
-+	buf->private_data = NULL;
-+
-+	buf->area = dma_alloc_coherent(pcm->card->dev, size,
-+					   &buf->addr, GFP_KERNEL);
-+
-+	if (!buf->area) {
-+		return -ENOMEM;
-+	}
-+
-+	memset(buf->area, 0xff, size);
-+
-+	DPRINTK("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
-+		(void *) buf->area, (void *) buf->addr, size);
-+
-+	buf->bytes = size;
-+
-+	return 0;
-+}
-+
-+static void gw_avila_pcm_free(struct snd_pcm *pcm)
-+{
-+	struct snd_pcm_substream *substream;
-+	struct snd_dma_buffer *buf;
-+	int stream;
-+
-+	for (stream = 0; stream < 2; stream++) {
-+		substream = pcm->streams[stream].substream;
-+		if (!substream)
-+			continue;
-+
-+		buf = &substream->dma_buffer;
-+		if (!buf->area)
-+			continue;
-+
-+		dma_free_coherent(NULL, buf->bytes, buf->area, 0);
-+		buf->area = NULL;
-+	}
-+}
-+
-+static u64 gw_avila_pcm_dmamask = 0xFFFFFFFF;
-+
-+static int gw_avila_pcm_new(struct snd_soc_pcm_runtime *rtd)
-+{
-+        struct snd_card *card = rtd->card->snd_card;
-+        struct snd_pcm *pcm = rtd->pcm;
-+        struct snd_soc_dai *dai = rtd->codec_dai;
-+	int ret;
-+
-+	if (!card->dev->dma_mask)
-+		card->dev->dma_mask = &gw_avila_pcm_dmamask;
-+	if (!card->dev->coherent_dma_mask)
-+		card->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+	if (dai->driver->playback.channels_min) {
-+		ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
-+			SNDRV_PCM_STREAM_PLAYBACK);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	if (dai->driver->capture.channels_min) {
-+		ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
-+			SNDRV_PCM_STREAM_CAPTURE);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+struct snd_soc_platform_driver gw_avila_soc_platform = {
-+	.ops = 	&gw_avila_pcm_ops,
-+	.pcm_new = 	gw_avila_pcm_new,
-+	.pcm_free = 	gw_avila_pcm_free,
-+};
-+
-+static int gw_avila_pcm_platform_probe(struct platform_device *pdev)
-+{
-+	return snd_soc_register_platform(&pdev->dev, &gw_avila_soc_platform);
-+}
-+
-+static int gw_avila_pcm_platform_remove(struct platform_device *pdev)
-+{
-+	snd_soc_unregister_platform(&pdev->dev);
-+	return 0;
-+}
-+
-+static struct platform_driver gw_avila_pcm_driver = {
-+	.driver = {
-+		.name = "gw_avila-audio",
-+		.owner = THIS_MODULE,
-+	},
-+	.probe = gw_avila_pcm_platform_probe,
-+	.remove = gw_avila_pcm_platform_remove,
-+};
-+
-+static int __init gw_avila_soc_platform_init(void)
-+{
-+	return platform_driver_register(&gw_avila_pcm_driver);
-+}
-+module_init(gw_avila_soc_platform_init);
-+
-+static void __exit gw_avila_soc_platform_exit(void)
-+{
-+	platform_driver_unregister(&gw_avila_pcm_driver);
-+}
-+module_exit(gw_avila_soc_platform_exit);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("Gateworks Avila PCM DMA module");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-pcm.h
-@@ -0,0 +1,32 @@
-+/*
-+ * ALSA PCM interface for the Gateworks Avila platform
-+ *
-+ * Author:      Chris Lang, <clang@gateworks.com>
-+ * Copyright:   (C) 2009 Gateworks Corporation
-+ *
-+ * Based On:    davinci-evm.c, Author: Vladimir Barinov, <vbarinov@ru.mvista.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GW_AVILA_PCM_H
-+#define _GW_AVILA_PCM_H
-+
-+#if 0
-+struct gw_avila_pcm_dma_params {
-+	char *name;		/* stream identifier */
-+	int channel;		/* sync dma channel ID */
-+	dma_addr_t dma_addr;	/* device physical address for DMA */
-+	unsigned int data_type;	/* xfer data type */
-+};
-+
-+struct gw_avila_snd_platform_data {
-+	int tx_dma_ch; // XXX Do we need this?
-+	int rx_dma_ch; // XXX Do we need this
-+};
-+extern struct snd_soc_platform gw_avila_soc_platform[];
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila.c
-@@ -0,0 +1,244 @@
-+/*
-+ * File:         sound/soc/gw-avila/gw_avila.c
-+ * Author:       Chris Lang <clang@gateworks.com>
-+ *
-+ * Created:      Tue June 06 2008
-+ * Description:  Board driver for Gateworks Avila
-+ *
-+ * Modified:
-+ *               Copyright 2009 Gateworks Corporation
-+ *
-+ * Bugs:         What Bugs?
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, see the file COPYING, or write
-+ * to the Free Software Foundation, Inc.,
-+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/device.h>
-+#include <asm/dma.h>
-+#include <linux/platform_device.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/soc.h>
-+#include <linux/slab.h>
-+#include <linux/gpio.h>
-+
-+#include "ixp4xx_hss.h"
-+#include "gw-avila-hss.h"
-+#include "gw-avila-pcm.h"
-+
-+#define CODEC_FREQ 33333000
-+
-+static int gw_avila_board_startup(struct snd_pcm_substream *substream)
-+{
-+	pr_debug("%s enter\n", __func__);
-+	return 0;
-+}
-+
-+static int gw_avila_hw_params(struct snd_pcm_substream *substream,
-+		struct snd_pcm_hw_params *params)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+
-+	int ret = 0;
-+
-+	/* set codec DAI configuration */
-+	if (cpu_dai->id % 2) {
-+  		ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBS_CFS);
-+			snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 1, 32);
-+	} else {
-+	  	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM);
-+			snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 32);
-+	}
-+
-+	if (ret < 0)
-+	    return ret;
-+
-+	/* set the codec system clock */
-+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_FREQ, SND_SOC_CLOCK_OUT);
-+	if (ret < 0)
-+	    return ret;
-+
-+	return 0;
-+}
-+
-+static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
-+  SND_SOC_DAPM_HP("Headphone Jack", NULL),
-+  SND_SOC_DAPM_LINE("Line Out", NULL),
-+  SND_SOC_DAPM_LINE("Line In", NULL),
-+};
-+
-+static const struct snd_soc_dapm_route audio_map[] = {
-+  {"Headphone Jack", NULL, "HPLOUT"},
-+  {"Headphone Jack", NULL, "HPROUT"},
-+
-+  /* Line Out connected to LLOUT, RLOUT */
-+  {"Line Out", NULL, "LLOUT"},
-+  {"Line Out", NULL, "RLOUT"},
-+
-+  /* Line In connected to (LINE1L | LINE2L), (LINE1R | LINE2R) */
-+  {"LINE1L", NULL, "Line In"},
-+  {"LINE1R", NULL, "Line In"},
-+};
-+
-+/* Logic for a aic3x as connected on a davinci-evm */
-+static int avila_aic3x_init(struct snd_soc_pcm_runtime *rtd)
-+{
-+	struct snd_soc_codec *codec = rtd->codec;
-+	struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
-+
-+  /* Add davinci-evm specific widgets */
-+  snd_soc_dapm_new_controls(dapm, aic3x_dapm_widgets,
-+          ARRAY_SIZE(aic3x_dapm_widgets));
-+
-+  /* Set up davinci-evm specific audio path audio_map */
-+  snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-+
-+  /* not connected */
-+  snd_soc_dapm_disable_pin(dapm, "MONO_LOUT");
-+  //snd_soc_dapm_disable_pin(dapm, "HPLCOM");
-+  //snd_soc_dapm_disable_pin(dapm, "HPRCOM");
-+  snd_soc_dapm_disable_pin(dapm, "MIC3L");
-+  snd_soc_dapm_disable_pin(dapm, "MIC3R");
-+  snd_soc_dapm_disable_pin(dapm, "LINE2L");
-+  snd_soc_dapm_disable_pin(dapm, "LINE2R");
-+
-+  /* always connected */
-+	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
-+  snd_soc_dapm_enable_pin(dapm, "Line Out");
-+  snd_soc_dapm_enable_pin(dapm, "Line In");
-+
-+  snd_soc_dapm_sync(dapm);
-+
-+	return 0;
-+}
-+
-+static struct snd_soc_ops gw_avila_board_ops = {
-+	.startup = gw_avila_board_startup,
-+	.hw_params = gw_avila_hw_params,
-+};
-+
-+static struct snd_soc_dai_link gw_avila_board_dai[] = {
-+	{
-+		.name = "HSS-0",
-+		.stream_name = "HSS-0",
-+		.cpu_dai_name = "gw_avila_hss.0",
-+		.codec_dai_name = "tlv320aic3x-hifi",
-+		.codec_name = "tlv320aic3x-codec.0-001b",
-+		.platform_name = "gw_avila-audio.0",
-+		.init = avila_aic3x_init,
-+		.ops = &gw_avila_board_ops,
-+	},{
-+		.name = "HSS-1",
-+		.stream_name = "HSS-1",
-+		.cpu_dai_name = "gw_avila_hss.1",
-+		.codec_dai_name = "tlv320aic3x-hifi",
-+		.codec_name = "tlv320aic3x-codec.0-001a",
-+		.platform_name = "gw_avila-audio.1",
-+		.init = avila_aic3x_init,
-+		.ops = &gw_avila_board_ops,
-+	},{
-+		.name = "HSS-2",
-+		.stream_name = "HSS-2",
-+		.cpu_dai_name = "gw_avila_hss.2",
-+		.codec_dai_name = "tlv320aic3x-hifi",
-+		.codec_name = "tlv320aic3x-codec.0-0019",
-+		.platform_name = "gw_avila-audio.2",
-+		.init = avila_aic3x_init,
-+		.ops = &gw_avila_board_ops,
-+	},{
-+		.name = "HSS-3",
-+		.stream_name = "HSS-3",
-+		.cpu_dai_name = "gw_avila_hss.3",
-+		.codec_dai_name = "tlv320aic3x-hifi",
-+		.codec_name = "tlv320aic3x-codec.0-0018",
-+		.platform_name = "gw_avila-audio.3",
-+		.init = avila_aic3x_init,
-+		.ops = &gw_avila_board_ops,
-+	},
-+};
-+
-+static struct snd_soc_card gw_avila_board[] = {
-+	{
-+		.name = "gw_avila-board.0",
-+		.owner = THIS_MODULE,
-+		.dai_link = &gw_avila_board_dai[0],
-+		.num_links = 1,
-+	},{
-+		.name = "gw_avila-board.1",
-+		.owner = THIS_MODULE,
-+		.dai_link = &gw_avila_board_dai[1],
-+		.num_links = 1,
-+	},{
-+		.name = "gw_avila-board.2",
-+		.owner = THIS_MODULE,
-+		.dai_link = &gw_avila_board_dai[2],
-+		.num_links = 1,
-+	},{
-+		.name = "gw_avila-board.3",
-+		.owner = THIS_MODULE,
-+		.dai_link = &gw_avila_board_dai[3],
-+		.num_links = 1,
-+	}
-+};
-+
-+static struct platform_device *gw_avila_board_snd_device[4];
-+
-+static int __init gw_avila_board_init(void)
-+{
-+	int ret;
-+	struct port *port;
-+	int i;
-+
-+	if ((hss_port[0] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+		return -ENOMEM;
-+
-+	if ((hss_port[1] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+		return -ENOMEM;
-+
-+	for (i = 0; i < 4; i++) {
-+		gw_avila_board_snd_device[i] = platform_device_alloc("soc-audio", i);
-+		if (!gw_avila_board_snd_device[i]) {
-+			return -ENOMEM;
-+		}
-+
-+		platform_set_drvdata(gw_avila_board_snd_device[i], &gw_avila_board[i]);
-+		ret = platform_device_add(gw_avila_board_snd_device[i]);
-+
-+		if (ret) {
-+			platform_device_put(gw_avila_board_snd_device[i]);
-+		}
-+	}
-+	return ret;
-+}
-+
-+static void __exit gw_avila_board_exit(void)
-+{
-+	int i;
-+	for (i = 0; i < 4; i++)
-+		platform_device_unregister(gw_avila_board_snd_device[i]);
-+}
-+
-+module_init(gw_avila_board_init);
-+module_exit(gw_avila_board_exit);
-+
-+/* Module information */
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("ALSA SoC HSS Audio gw_avila board");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/ixp4xx_hss.c
-@@ -0,0 +1,902 @@
-+/*
-+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
-+ *
-+ * Copyright (C) 2009 Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/bitops.h>
-+#include <linux/cdev.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/fs.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/poll.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+#include <mach/npe.h>
-+#include <mach/qmgr.h>
-+
-+#include "ixp4xx_hss.h"
-+
-+/*****************************************************************************
-+ * global variables
-+ ****************************************************************************/
-+
-+void hss_chan_read(unsigned long data);
-+static char lock_init = 0;
-+static spinlock_t npe_lock;
-+static struct npe *npe;
-+
-+static const struct {
-+	int tx, txdone, rx, rxfree, chan;
-+}queue_ids[2] = {{HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE, HSS0_PKT_RX_QUEUE,
-+		  HSS0_PKT_RXFREE0_QUEUE, HSS0_CHL_RXTRIG_QUEUE},
-+		 {HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE, HSS1_PKT_RX_QUEUE,
-+		  HSS1_PKT_RXFREE0_QUEUE, HSS1_CHL_RXTRIG_QUEUE},
-+};
-+
-+struct port *hss_port[2];
-+struct hss_device *hss_handle[32];
-+EXPORT_SYMBOL(hss_handle);
-+
-+/*****************************************************************************
-+ * utility functions
-+ ****************************************************************************/
-+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
-+{
-+	int i;
-+	for (i = 0; i < cnt; i++)
-+		dest[i] = swab32(src[i]);
-+}
-+#endif
-+
-+static inline unsigned int sub_offset(unsigned int a, unsigned int b,
-+				      unsigned int modulo)
-+{
-+	return (modulo /* make sure the result >= 0 */ + a - b) % modulo;
-+}
-+
-+/*****************************************************************************
-+ * HSS access
-+ ****************************************************************************/
-+
-+static void hss_config_load(struct port *port)
-+{
-+	struct msg msg;
-+
-+	do {
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = PORT_CONFIG_LOAD;
-+		msg.hss_port = port->id;
-+		if (npe_send_message(npe, &msg, "HSS_LOAD_CONFIG"))
-+			break;
-+		if (npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG"))
-+			break;
-+
-+		/* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
-+		if (msg.cmd != PORT_CONFIG_LOAD || msg.data32)
-+			break;
-+
-+		/* HDLC may stop working without this */
-+		npe_recv_message(npe, &msg, "FLUSH_IT");
-+		return;
-+	} while (0);
-+
-+	printk(KERN_CRIT "HSS-%i: unable to reload HSS configuration\n",
-+	       port->id);
-+	BUG();
-+}
-+
-+static void hss_config_set_pcr(struct port *port)
-+{
-+	struct msg msg;
-+
-+	do {
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = PORT_CONFIG_WRITE;
-+		msg.hss_port = port->id;
-+		msg.index = HSS_CONFIG_TX_PCR;
-+#if 0
-+		msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
-+			PCR_TX_DATA_ENABLE | PCR_TX_UNASS_HIGH_IMP | PCR_TX_V56K_HIGH_IMP | PCR_TX_FB_HIGH_IMP;
-+#else
-+		msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
-+			PCR_TX_DATA_ENABLE | PCR_TX_FB_HIGH_IMP | PCR_DCLK_EDGE_RISING;
-+#endif
-+		if (port->frame_size % 8 == 0)
-+			msg.data32 |= PCR_SOF_NO_FBIT;
-+
-+		if (npe_send_message(npe, &msg, "HSS_SET_TX_PCR"))
-+			break;
-+
-+		msg.index = HSS_CONFIG_RX_PCR;
-+		msg.data32 &= ~ (PCR_DCLK_EDGE_RISING | PCR_FCLK_EDGE_RISING | PCR_TX_DATA_ENABLE);
-+
-+		if (npe_send_message(npe, &msg, "HSS_SET_RX_PCR"))
-+			break;
-+		return;
-+	} while (0);
-+
-+	printk(KERN_CRIT "HSS-%i: unable to set HSS PCR registers\n", port->id);
-+	BUG();
-+}
-+
-+static void hss_config_set_core(struct port *port)
-+{
-+	struct msg msg;
-+
-+	memset(&msg, 0, sizeof(msg));
-+	msg.cmd = PORT_CONFIG_WRITE;
-+	msg.hss_port = port->id;
-+	msg.index = HSS_CONFIG_CORE_CR;
-+#if 0
-+	msg.data32 = 0 | CCR_LOOPBACK |
-+		(port->id ? CCR_SECOND_HSS : 0);
-+#else
-+	msg.data32 = 0 |
-+		(port->id ? CCR_SECOND_HSS : 0);
-+#endif
-+	if (npe_send_message(npe, &msg, "HSS_SET_CORE_CR")) {
-+		printk(KERN_CRIT "HSS-%i: unable to set HSS core control"
-+		       " register\n", port->id);
-+		BUG();
-+	}
-+}
-+
-+static void hss_config_set_line(struct port *port)
-+{
-+	struct msg msg;
-+
-+	hss_config_set_pcr(port);
-+	hss_config_set_core(port);
-+
-+	memset(&msg, 0, sizeof(msg));
-+	msg.cmd = PORT_CONFIG_WRITE;
-+	msg.hss_port = port->id;
-+	msg.index = HSS_CONFIG_CLOCK_CR;
-+	msg.data32 = CLK42X_SPEED_8192KHZ /* FIXME */;
-+	if (npe_send_message(npe, &msg, "HSS_SET_CLOCK_CR")) {
-+		printk(KERN_CRIT "HSS-%i: unable to set HSS clock control"
-+		       " register\n", port->id);
-+		BUG();
-+	}
-+}
-+
-+static void hss_config_set_rx_frame(struct port *port)
-+{
-+	struct msg msg;
-+
-+	memset(&msg, 0, sizeof(msg));
-+	msg.cmd = PORT_CONFIG_WRITE;
-+	msg.hss_port = port->id;
-+	msg.index = HSS_CONFIG_RX_FCR;
-+	msg.data16a = port->frame_sync_offset;
-+	msg.data16b = port->frame_size - 1;
-+	if (npe_send_message(npe, &msg, "HSS_SET_RX_FCR")) {
-+		printk(KERN_CRIT "HSS-%i: unable to set HSS RX frame size"
-+		       " and offset\n", port->id);
-+		BUG();
-+	}
-+}
-+
-+static void hss_config_set_frame(struct port *port)
-+{
-+	struct msg msg;
-+
-+	memset(&msg, 0, sizeof(msg));
-+	msg.cmd = PORT_CONFIG_WRITE;
-+	msg.hss_port = port->id;
-+	msg.index = HSS_CONFIG_TX_FCR;
-+	msg.data16a = TX_FRAME_SYNC_OFFSET;
-+	msg.data16b = port->frame_size - 1;
-+	if (npe_send_message(npe, &msg, "HSS_SET_TX_FCR")) {
-+		printk(KERN_CRIT "HSS-%i: unable to set HSS TX frame size"
-+		       " and offset\n", port->id);
-+		BUG();
-+	}
-+	hss_config_set_rx_frame(port);
-+}
-+
-+static void hss_config_set_lut(struct port *port)
-+{
-+	struct msg msg;
-+	int chan_count = 32;
-+
-+	memset(&msg, 0, sizeof(msg));
-+	msg.cmd = PORT_CONFIG_WRITE;
-+	msg.hss_port = port->id;
-+
-+	msg.index = HSS_CONFIG_TX_LUT;
-+	msg.data32 = 0xffffffff;
-+	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+	msg.data32 = 0x0;
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+
-+	msg.index = HSS_CONFIG_RX_LUT;
-+	msg.data32 = 0xffffffff;
-+	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+	msg.data32 = 0x0;
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+	msg.index += 4;
-+	npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+
-+	hss_config_set_frame(port);
-+
-+	memset(&msg, 0, sizeof(msg));
-+	msg.cmd = CHAN_NUM_CHANS_WRITE;
-+	msg.hss_port = port->id;
-+	msg.data8a = chan_count;
-+	if (npe_send_message(npe, &msg, "CHAN_NUM_CHANS_WRITE")) {
-+		printk(KERN_CRIT "HSS-%i: unable to set HSS channel count\n",
-+		       port->id);
-+		BUG();
-+	}
-+}
-+
-+static u32 hss_config_get_status(struct port *port)
-+{
-+	struct msg msg;
-+
-+	do {
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = PORT_ERROR_READ;
-+		msg.hss_port = port->id;
-+		if (npe_send_message(npe, &msg, "PORT_ERROR_READ"))
-+			break;
-+		if (npe_recv_message(npe, &msg, "PORT_ERROR_READ"))
-+			break;
-+
-+		return msg.data32;
-+	} while (0);
-+
-+	printk(KERN_CRIT "HSS-%i: unable to read HSS status\n", port->id);
-+	BUG();
-+}
-+
-+static void hss_config_start_chan(struct port *port)
-+{
-+	struct msg msg;
-+
-+	port->chan_last_tx = 0;
-+	port->chan_last_rx = 0;
-+
-+	do {
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = CHAN_RX_BUF_ADDR_WRITE;
-+		msg.hss_port = port->id;
-+		msg.data32 = port->chan_rx_buf_phys;
-+		if (npe_send_message(npe, &msg, "CHAN_RX_BUF_ADDR_WRITE"))
-+			break;
-+
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = CHAN_TX_BUF_ADDR_WRITE;
-+		msg.hss_port = port->id;
-+		msg.data32 = port->chan_tx_pointers_phys;
-+		if (npe_send_message(npe, &msg, "CHAN_TX_BUF_ADDR_WRITE"))
-+			break;
-+
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = CHAN_FLOW_ENABLE;
-+		msg.hss_port = port->id;
-+		if (npe_send_message(npe, &msg, "CHAN_FLOW_ENABLE"))
-+			break;
-+		port->chan_started = 1;
-+		return;
-+	} while (0);
-+
-+	printk(KERN_CRIT "HSS-%i: unable to start channelized flow\n",
-+	       port->id);
-+	BUG();
-+}
-+
-+static void hss_config_stop_chan(struct port *port)
-+{
-+	struct msg msg;
-+
-+	if (!port->chan_started)
-+		return;
-+
-+	memset(&msg, 0, sizeof(msg));
-+	msg.cmd = CHAN_FLOW_DISABLE;
-+	msg.hss_port = port->id;
-+	if (npe_send_message(npe, &msg, "CHAN_FLOW_DISABLE")) {
-+		printk(KERN_CRIT "HSS-%i: unable to stop channelized flow\n",
-+		       port->id);
-+		BUG();
-+	}
-+	hss_config_get_status(port); /* make sure it's halted */
-+	port->chan_started = 0;
-+}
-+
-+static int hss_config_load_firmware(struct port *port)
-+{
-+	struct msg msg;
-+
-+	if (port->initialized)
-+		return 0;
-+
-+	if (!npe_running(npe)) {
-+		int err;
-+		if ((err = npe_load_firmware(npe, "NPE-A-HSS",
-+					     port->dev)))
-+			return err;
-+	}
-+
-+	do {
-+		/* HSS main configuration */
-+		hss_config_set_line(port);
-+
-+		hss_config_set_frame(port);
-+
-+		/* Channelized operation settings */
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = CHAN_TX_BLK_CFG_WRITE;
-+		msg.hss_port = port->id;
-+		msg.data8b = (CHAN_TX_LIST_FRAMES & ~7) / 2;
-+		msg.data8a = msg.data8b / 4;
-+		msg.data8d = CHAN_TX_LIST_FRAMES - msg.data8b;
-+		msg.data8c = msg.data8d / 4;
-+		if (npe_send_message(npe, &msg, "CHAN_TX_BLK_CFG_WRITE"))
-+			break;
-+
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = CHAN_RX_BUF_CFG_WRITE;
-+		msg.hss_port = port->id;
-+		msg.data8a = CHAN_RX_TRIGGER / 8;
-+		msg.data8b = CHAN_RX_FRAMES;
-+		if (npe_send_message(npe, &msg, "CHAN_RX_BUF_CFG_WRITE"))
-+			break;
-+
-+		memset(&msg, 0, sizeof(msg));
-+		msg.cmd = CHAN_TX_BUF_SIZE_WRITE;
-+		msg.hss_port = port->id;
-+		msg.data8a = CHAN_TX_LISTS;
-+		if (npe_send_message(npe, &msg, "CHAN_TX_BUF_SIZE_WRITE"))
-+			break;
-+
-+		port->initialized = 1;
-+		return 0;
-+	} while (0);
-+
-+	printk(KERN_CRIT "HSS-%i: unable to start HSS operation\n", port->id);
-+	BUG();
-+}
-+
-+void hss_chan_irq(void *pdev)
-+{
-+	struct port *port = pdev;
-+
-+	qmgr_disable_irq(queue_ids[port->id].chan);
-+
-+	tasklet_hi_schedule(&port->task);
-+}
-+
-+
-+int hss_prepare_chan(struct port *port)
-+{
-+	int err, i, j;
-+	u32 *temp;
-+	u32 temp2;
-+	u8 *temp3;
-+
-+	if (port->initialized)
-+		return 0;
-+
-+	if ((err = hss_config_load_firmware(port)))
-+		return err;
-+
-+	if ((err = qmgr_request_queue(queue_ids[port->id].chan,
-+				      CHAN_QUEUE_LEN, 0, 0, "%s:hss", "hss")))
-+		return err;
-+
-+	port->chan_tx_buf = dma_alloc_coherent(port->dev, chan_tx_buf_len(port), &port->chan_tx_buf_phys, GFP_DMA);
-+	memset(port->chan_tx_buf, 0, chan_tx_buf_len(port));
-+
-+	port->chan_tx_pointers = dma_alloc_coherent(port->dev, chan_tx_buf_len(port) / CHAN_TX_LIST_FRAMES * 4, &port->chan_tx_pointers_phys, GFP_DMA);
-+
-+	temp3 = port->chan_tx_buf;
-+	for (i = 0; i < CHAN_TX_LISTS; i++) {
-+		for (j = 0; j < 8; j++) {
-+			port->tx_lists[i][j] = temp3;
-+			temp3 += CHAN_TX_LIST_FRAMES * 4;
-+		}
-+	}
-+
-+	temp = port->chan_tx_pointers;
-+	temp2 = port->chan_tx_buf_phys;
-+	for (i = 0; i < CHAN_TX_LISTS; i++)
-+	{
-+		for (j = 0; j < 32; j++)
-+		{
-+			*temp = temp2;
-+			temp2 += CHAN_TX_LIST_FRAMES;
-+			temp++;
-+		}
-+	}
-+
-+	port->chan_rx_buf = dma_alloc_coherent(port->dev, chan_rx_buf_len(port), &port->chan_rx_buf_phys, GFP_DMA);
-+
-+	for (i = 0; i < 8; i++) {
-+		temp3 = port->chan_rx_buf + (i * 4 * 128);
-+		for (j = 0; j < 8; j++) {
-+			port->rx_frames[i][j] = temp3;
-+			temp3 += CHAN_RX_TRIGGER;
-+		}
-+	}
-+
-+	qmgr_set_irq(queue_ids[port->id].chan, QUEUE_IRQ_SRC_NOT_EMPTY,
-+		     hss_chan_irq, port);
-+
-+	return 0;
-+
-+}
-+
-+int hss_tx_start(struct hss_device *hdev)
-+{
-+	unsigned long flags;
-+	struct port *port = hdev->port;
-+
-+	hdev->tx_loc = 0;
-+	hdev->tx_frame = 0;
-+
-+	set_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+	if (!port->chan_started)
-+	{
-+		qmgr_enable_irq(queue_ids[port->id].chan);
-+		spin_lock_irqsave(&npe_lock, flags);
-+		hss_config_start_chan(port);
-+		spin_unlock_irqrestore(&npe_lock, flags);
-+		hss_chan_irq(port);
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(hss_tx_start);
-+
-+int hss_rx_start(struct hss_device *hdev)
-+{
-+	unsigned long flags;
-+	struct port *port = hdev->port;
-+
-+	hdev->rx_loc = 0;
-+	hdev->rx_frame = 0;
-+
-+	set_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+
-+	if (!port->chan_started)
-+	{
-+		qmgr_enable_irq(queue_ids[port->id].chan);
-+		spin_lock_irqsave(&npe_lock, flags);
-+		hss_config_start_chan(port);
-+		spin_unlock_irqrestore(&npe_lock, flags);
-+		hss_chan_irq(port);
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(hss_rx_start);
-+
-+int hss_tx_stop(struct hss_device *hdev)
-+{
-+	struct port *port = hdev->port;
-+
-+	clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(hss_tx_stop);
-+
-+int hss_rx_stop(struct hss_device *hdev)
-+{
-+	struct port *port = hdev->port;
-+
-+	clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(hss_rx_stop);
-+
-+int hss_chan_open(struct hss_device *hdev)
-+{
-+	struct port *port = hdev->port;
-+	int i, err = 0;
-+
-+	if (port->chan_open)
-+		return 0;
-+
-+	if (port->mode == MODE_HDLC) {
-+		err = -ENOSYS;
-+		goto out;
-+	}
-+
-+	if (port->mode == MODE_G704 && port->channels[0] == hdev->id) {
-+		err = -EBUSY; /* channel #0 is used for G.704 signaling */
-+		goto out;
-+	}
-+
-+	for (i = MAX_CHANNELS; i > port->frame_size / 8; i--)
-+		if (port->channels[i - 1] == hdev->id) {
-+			err = -ECHRNG; /* frame too short */
-+			goto out;
-+		}
-+
-+	hdev->rx_loc = hdev->tx_loc = 0;
-+	hdev->rx_frame = hdev->tx_frame = 0;
-+
-+	//clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+	//clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+	if (!port->initialized) {
-+		hss_prepare_chan(port);
-+
-+		hss_config_stop_chan(port);
-+		hdev->open_count++;
-+		port->chan_open_count++;
-+
-+		hss_config_set_lut(port);
-+		hss_config_load(port);
-+
-+	}
-+	port->chan_open = 1;
-+
-+out:
-+	return err;
-+}
-+EXPORT_SYMBOL(hss_chan_open);
-+
-+int hss_chan_close(struct hss_device *hdev)
-+{
-+	return 0;
-+}
-+EXPORT_SYMBOL(hss_chan_close);
-+
-+void hss_chan_read(unsigned long data)
-+{
-+	struct port *port = (void *)data;
-+	struct hss_device *hdev;
-+	u8 *hw_buf, *save_buf;
-+	u8 *buf;
-+	u32 v;
-+  unsigned int tx_list, rx_frame;
-+	int i, j, channel;
-+	u8 more_work = 0;
-+
-+/*
-+	My Data in the hardware buffer is scattered by channels into 4 trunks
-+	as follows for rx
-+
-+					channel 0					channel 1					channel 2					channel 3
-+Trunk 1	=	0			-> 	127			128		->	255			256		->	383			384		->	512
-+Trunk 2 =	513		->	639			640		->	768			769		->	895			896		->	1023
-+Trunk 3 =	1024	->	1151		1152	->	1207		1208	->	1407		1408	->	1535
-+Trunk 4 = 1535	->	1663		1664	->	1791		1792	->	1920		1921	->	2047
-+
-+	I will get CHAN_RX_TRIGGER worth of bytes out of each channel on each trunk
-+	with each IRQ
-+
-+	For TX Data, it is split into 8 lists with each list containing 16 bytes per
-+	channel
-+
-+Trunk 1 = 0		->	16				17		->	32			33		->	48			49		->	64
-+Trunk 2 = 65	->	80				81		->	96			97		->	112			113		->	128
-+Trunk	3	=	129	->	144				145		->	160			161		->	176			177		->	192
-+Trunk	4	=	193	->	208				209		->	224			225		->	240			241		->	256
-+
-+*/
-+
-+
-+	while ((v = qmgr_get_entry(queue_ids[port->id].chan)))
-+	{
-+		tx_list = (v >> 8) & 0xFF;
-+		rx_frame = v & 0xFF;
-+
-+		if (tx_list == 7)
-+			tx_list = 0;
-+		else
-+			tx_list++;
-+		for (channel = 0; channel < 8; channel++) {
-+
-+			hdev = port->chan_devices[channel];
-+			if (!hdev)
-+				continue;
-+
-+			if (test_bit(1 << channel, &port->chan_tx_bitmap)) {
-+				buf = (u8 *)hdev->tx_buf + hdev->tx_loc;
-+#if 0
-+				hw_buf = (u8 *)port->chan_tx_buf;
-+				hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
-+				hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
-+				save_buf = hw_buf;
-+#else
-+				save_buf = port->tx_lists[tx_list][channel];
-+#endif
-+				for (i = 0; i < CHAN_TX_LIST_FRAMES; i++) {
-+					hw_buf = save_buf + i;
-+					for (j = 0; j < 4; j++) {
-+						*hw_buf = *(buf++);
-+						hw_buf += CHAN_TX_LIST_FRAMES;
-+					}
-+
-+					hdev->tx_loc += 4;
-+					hdev->tx_frame++;
-+					if (hdev->tx_loc >= hdev->tx_buffer_size) {
-+						hdev->tx_loc = 0;
-+						buf = (u8 *)hdev->tx_buf;
-+					}
-+				}
-+			} else {
-+#if 0
-+				hw_buf = (u8 *)port->chan_tx_buf;
-+				hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
-+				hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
-+#else
-+				hw_buf = port->tx_lists[tx_list][channel];
-+#endif
-+				memset(hw_buf, 0, 64);
-+			}
-+
-+			if (hdev->tx_frame >= hdev->tx_period_size && test_bit(1 << channel, &port->chan_tx_bitmap))
-+			{
-+				hdev->tx_frame %= hdev->tx_period_size;
-+				if (hdev->tx_callback)
-+					hdev->tx_callback(hdev->tx_data);
-+				more_work = 1;
-+			}
-+
-+			if (test_bit(1 << channel, &port->chan_rx_bitmap)) {
-+				buf = (u8 *)hdev->rx_buf + hdev->rx_loc;
-+#if 0
-+				hw_buf = (u8 *)port->chan_rx_buf;
-+				hw_buf += (4 * CHAN_RX_FRAMES * channel);
-+				hw_buf += rx_frame;
-+				save_buf = hw_buf;
-+#else
-+				save_buf = port->rx_frames[channel][rx_frame >> 4];
-+#endif
-+				for (i = 0; i < CHAN_RX_TRIGGER; i++) {
-+					hw_buf = save_buf + i;
-+					for (j = 0; j < 4; j++) {
-+						*(buf++) = *hw_buf;
-+						hw_buf += CHAN_RX_FRAMES;
-+					}
-+					hdev->rx_loc += 4;
-+					hdev->rx_frame++;
-+					if (hdev->rx_loc >= hdev->rx_buffer_size) {
-+						hdev->rx_loc = 0;
-+						buf = (u8 *)hdev->rx_buf;
-+					}
-+				}
-+			}
-+
-+			if (hdev->rx_frame >= hdev->rx_period_size && test_bit(1 << channel, &port->chan_rx_bitmap))
-+			{
-+				hdev->rx_frame %= hdev->rx_period_size;
-+				if (hdev->rx_callback)
-+					hdev->rx_callback(hdev->rx_data);
-+				more_work = 1;
-+			}
-+		}
-+#if 0
-+		if (more_work)
-+		{
-+			tasklet_hi_schedule(&port->task);
-+			return;
-+		}
-+#endif
-+	}
-+
-+	qmgr_enable_irq(queue_ids[port->id].chan);
-+
-+	return;
-+
-+}
-+
-+struct hss_device *hss_chan_create(struct port *port, unsigned int channel)
-+{
-+	struct hss_device *chan_dev;
-+	unsigned long flags;
-+
-+	chan_dev = kzalloc(sizeof(struct hss_device), GFP_KERNEL);
-+
-+	spin_lock_irqsave(&npe_lock, flags);
-+
-+	chan_dev->id = channel;
-+	chan_dev->port = port;
-+
-+	port->channels[channel] = channel;
-+
-+	port->chan_devices[channel] = chan_dev;
-+
-+	spin_unlock_irqrestore(&npe_lock, flags);
-+
-+	return chan_dev;
-+}
-+
-+/*****************************************************************************
-+ * initialization
-+ ****************************************************************************/
-+
-+static struct platform_device gw_avila_hss_device_0 = {
-+  .name     = "ixp4xx_hss",
-+  .id       = 0,
-+};
-+
-+static struct platform_device gw_avila_hss_device_1 = {
-+  .name     = "ixp4xx_hss",
-+  .id       = 1,
-+};
-+
-+static struct platform_device *gw_avila_hss_port_0;
-+static struct platform_device *gw_avila_hss_port_1;
-+static u64 hss_dmamask = 0xFFFFFFFF;
-+
-+struct hss_device *hss_init(int id, int channel)
-+{
-+	struct port *port = hss_port[id];
-+	struct hss_device *hdev;
-+	int ret;
-+
-+	if (!lock_init)
-+	{
-+		spin_lock_init(&npe_lock);
-+		lock_init = 1;
-+		npe = npe_request(0);
-+	}
-+
-+	if (!port->init) {
-+		if (id == 0) {
-+			gw_avila_hss_port_0 = platform_device_alloc("hss-port", 0);
-+
-+			platform_set_drvdata(gw_avila_hss_port_0, &gw_avila_hss_device_0);
-+			port->dev = &gw_avila_hss_port_0->dev;
-+
-+			if (!port->dev->dma_mask)
-+		    port->dev->dma_mask = &hss_dmamask;
-+		  if (!port->dev->coherent_dma_mask)
-+	    	port->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+			ret = platform_device_add(gw_avila_hss_port_0);
-+
-+		  if (ret)
-+	  	  platform_device_put(gw_avila_hss_port_0);
-+
-+			tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
-+		}
-+		else
-+		{
-+			gw_avila_hss_port_1 = platform_device_alloc("hss-port", 1);
-+
-+			platform_set_drvdata(gw_avila_hss_port_1, &gw_avila_hss_device_1);
-+			port->dev = &gw_avila_hss_port_1->dev;
-+
-+			if (!port->dev->dma_mask)
-+		    port->dev->dma_mask = &hss_dmamask;
-+		  if (!port->dev->coherent_dma_mask)
-+	    	port->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+			ret = platform_device_add(gw_avila_hss_port_1);
-+
-+		  if (ret)
-+	  	  platform_device_put(gw_avila_hss_port_1);
-+
-+			tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
-+		}
-+
-+		port->init = 1;
-+		port->id = id;
-+		port->clock_type = CLOCK_EXT;
-+		port->clock_rate = 8192000;
-+		port->frame_size = 256; /* E1 */
-+		port->mode = MODE_RAW;
-+		port->next_rx_frame = 0;
-+		memset(port->channels, CHANNEL_UNUSED, sizeof(port->channels));
-+	}
-+
-+	hdev = hss_chan_create(port, channel);
-+
-+	return hdev;
-+}
-+EXPORT_SYMBOL(hss_init);
-+
-+int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data)
-+{
-+  BUG_ON(tx_callback == NULL);
-+  hdev->tx_callback = tx_callback;
-+  hdev->tx_data = tx_data;
-+
-+  return 0;
-+}
-+EXPORT_SYMBOL(hss_set_tx_callback);
-+
-+int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data)
-+{
-+  BUG_ON(rx_callback == NULL);
-+  hdev->rx_callback = rx_callback;
-+  hdev->rx_data = rx_data;
-+
-+  return 0;
-+}
-+EXPORT_SYMBOL(hss_set_rx_callback);
-+
-+int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
-+{
-+	/*
-+	 * Period Size and Buffer Size are in Frames which are u32
-+	 * We convert the u32 *buf to u8 in order to make channel reads
-+	 * and rx_loc easier
-+	 */
-+
-+	hdev->rx_buf = (u8 *)buf;
-+	hdev->rx_buffer_size = buffer_size << 2;
-+	hdev->rx_period_size = period_size;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(hss_config_rx_dma);
-+
-+int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
-+{
-+	/*
-+	 * Period Size and Buffer Size are in Frames which are u32
-+	 * We convert the u32 *buf to u8 in order to make channel reads
-+	 * and rx_loc easier
-+	 */
-+
-+	hdev->tx_buf = (u8 *)buf;
-+	hdev->tx_buffer_size = buffer_size << 2;
-+	hdev->tx_period_size = period_size;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(hss_config_tx_dma);
-+
-+unsigned long hss_curr_offset_rx(struct hss_device *hdev)
-+{
-+	return hdev->rx_loc >> 2;
-+}
-+EXPORT_SYMBOL(hss_curr_offset_rx);
-+
-+unsigned long hss_curr_offset_tx(struct hss_device *hdev)
-+{
-+	return hdev->tx_loc >> 2;
-+}
-+EXPORT_SYMBOL(hss_curr_offset_tx);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("Intel IXP4xx HSS Audio driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/sound/soc/gw-avila/ixp4xx_hss.h
-@@ -0,0 +1,401 @@
-+/*
-+ *
-+ *
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/bitops.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/fs.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/poll.h>
-+#include <mach/npe.h>
-+#include <mach/qmgr.h>
-+#include <linux/interrupt.h>
-+
-+//#include <linux/hdlc.h> XXX We aren't HDLC
-+
-+#define DEBUG_QUEUES		0
-+#define DEBUG_DESC		0
-+#define DEBUG_RX		0
-+#define DEBUG_TX		0
-+#define DEBUG_PKT_BYTES		0
-+#define DEBUG_CLOSE		0
-+#define DEBUG_FRAMER		0
-+
-+#define DRV_NAME		"ixp4xx_hss"
-+
-+#define PKT_EXTRA_FLAGS		0 /* orig 1 */
-+#define TX_FRAME_SYNC_OFFSET	0 /* channelized */
-+#define PKT_NUM_PIPES		1 /* 1, 2 or 4 */
-+#define PKT_PIPE_FIFO_SIZEW	4 /* total 4 dwords per HSS */
-+
-+#define RX_DESCS		512 /* also length of all RX queues */
-+#define TX_DESCS		512 /* also length of all TX queues */
-+
-+//#define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define RX_SIZE			(HDLC_MAX_MRU + 4) /* NPE needs more space */
-+#define MAX_CLOSE_WAIT		1000 /* microseconds */
-+#define HSS_COUNT		2
-+#define MIN_FRAME_SIZE		16   /* bits */
-+#define MAX_FRAME_SIZE		257  /* 256 bits + framing bit */
-+#define MAX_CHANNELS		(MAX_FRAME_SIZE / 8)
-+#define MAX_CHAN_DEVICES	32
-+#define CHANNEL_HDLC		0xFE
-+#define CHANNEL_UNUSED		0xFF
-+
-+#define NAPI_WEIGHT		16
-+#define CHAN_RX_TRIGGER		16 /* 8 RX frames = 1 ms @ E1 */
-+#define CHAN_RX_FRAMES		128
-+#define CHAN_RX_TRUNKS		1
-+#define MAX_CHAN_RX_BAD_SYNC	(CHAN_RX_TRIGGER / 2 /* pairs */ - 3)
-+
-+#define CHAN_TX_LIST_FRAMES	CHAN_RX_TRIGGER /* bytes/channel per list, 16 - 48 */
-+#define CHAN_TX_LISTS		8
-+#define CHAN_TX_TRUNKS CHAN_RX_TRUNKS
-+#define CHAN_TX_FRAMES		(CHAN_TX_LIST_FRAMES * CHAN_TX_LISTS)
-+
-+#define CHAN_QUEUE_LEN		32 /* minimum possible */
-+
-+#define chan_rx_buf_len(port)	(port->frame_size / 8 * CHAN_RX_FRAMES * CHAN_RX_TRUNKS)
-+#define chan_tx_buf_len(port) (port->frame_size / 8 * CHAN_TX_FRAMES * CHAN_TX_TRUNKS)
-+
-+/* Queue IDs */
-+#define HSS0_CHL_RXTRIG_QUEUE	12	/* orig size = 32 dwords */
-+#define HSS0_PKT_RX_QUEUE	13	/* orig size = 32 dwords */
-+#define HSS0_PKT_TX0_QUEUE	14	/* orig size = 16 dwords */
-+#define HSS0_PKT_TX1_QUEUE	15
-+#define HSS0_PKT_TX2_QUEUE	16
-+#define HSS0_PKT_TX3_QUEUE	17
-+#define HSS0_PKT_RXFREE0_QUEUE	18	/* orig size = 16 dwords */
-+#define HSS0_PKT_RXFREE1_QUEUE	19
-+#define HSS0_PKT_RXFREE2_QUEUE	20
-+#define HSS0_PKT_RXFREE3_QUEUE	21
-+#define HSS0_PKT_TXDONE_QUEUE	22	/* orig size = 64 dwords */
-+
-+#define HSS1_CHL_RXTRIG_QUEUE	10
-+#define HSS1_PKT_RX_QUEUE	0
-+#define HSS1_PKT_TX0_QUEUE	5
-+#define HSS1_PKT_TX1_QUEUE	6
-+#define HSS1_PKT_TX2_QUEUE	7
-+#define HSS1_PKT_TX3_QUEUE	8
-+#define HSS1_PKT_RXFREE0_QUEUE	1
-+#define HSS1_PKT_RXFREE1_QUEUE	2
-+#define HSS1_PKT_RXFREE2_QUEUE	3
-+#define HSS1_PKT_RXFREE3_QUEUE	4
-+#define HSS1_PKT_TXDONE_QUEUE	9
-+
-+#define NPE_PKT_MODE_HDLC		0
-+#define NPE_PKT_MODE_RAW		1
-+#define NPE_PKT_MODE_56KMODE		2
-+#define NPE_PKT_MODE_56KENDIAN_MSB	4
-+
-+/* PKT_PIPE_HDLC_CFG_WRITE flags */
-+#define PKT_HDLC_IDLE_ONES		0x1 /* default = flags */
-+#define PKT_HDLC_CRC_32			0x2 /* default = CRC-16 */
-+#define PKT_HDLC_MSB_ENDIAN		0x4 /* default = LE */
-+
-+
-+/* hss_config, PCRs */
-+/* Frame sync sampling, default = active low */
-+#define PCR_FRM_SYNC_ACTIVE_HIGH	0x40000000
-+#define PCR_FRM_SYNC_FALLINGEDGE	0x80000000
-+#define PCR_FRM_SYNC_RISINGEDGE		0xC0000000
-+
-+/* Frame sync pin: input (default) or output generated off a given clk edge */
-+#define PCR_FRM_SYNC_OUTPUT_FALLING	0x20000000
-+#define PCR_FRM_SYNC_OUTPUT_RISING	0x30000000
-+
-+/* Frame and data clock sampling on edge, default = falling */
-+#define PCR_FCLK_EDGE_RISING		0x08000000
-+#define PCR_DCLK_EDGE_RISING		0x04000000
-+
-+/* Clock direction, default = input */
-+#define PCR_SYNC_CLK_DIR_OUTPUT		0x02000000
-+
-+/* Generate/Receive frame pulses, default = enabled */
-+#define PCR_FRM_PULSE_DISABLED		0x01000000
-+
-+ /* Data rate is full (default) or half the configured clk speed */
-+#define PCR_HALF_CLK_RATE		0x00200000
-+
-+/* Invert data between NPE and HSS FIFOs? (default = no) */
-+#define PCR_DATA_POLARITY_INVERT	0x00100000
-+
-+/* TX/RX endianness, default = LSB */
-+#define PCR_MSB_ENDIAN			0x00080000
-+
-+/* Normal (default) / open drain mode (TX only) */
-+#define PCR_TX_PINS_OPEN_DRAIN		0x00040000
-+
-+/* No framing bit transmitted and expected on RX? (default = framing bit) */
-+#define PCR_SOF_NO_FBIT			0x00020000
-+
-+/* Drive data pins? */
-+#define PCR_TX_DATA_ENABLE		0x00010000
-+
-+/* Voice 56k type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_V56K_HIGH		0x00002000
-+#define PCR_TX_V56K_HIGH_IMP		0x00004000
-+
-+/* Unassigned type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_UNASS_HIGH		0x00000800
-+#define PCR_TX_UNASS_HIGH_IMP		0x00001000
-+
-+/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
-+#define PCR_TX_FB_HIGH_IMP		0x00000400
-+
-+/* 56k data endiannes - which bit unused: high (default) or low */
-+#define PCR_TX_56KE_BIT_0_UNUSED	0x00000200
-+
-+/* 56k data transmission type: 32/8 bit data (default) or 56K data */
-+#define PCR_TX_56KS_56K_DATA		0x00000100
-+
-+/* hss_config, cCR */
-+/* Number of packetized clients, default = 1 */
-+#define CCR_NPE_HFIFO_2_HDLC		0x04000000
-+#define CCR_NPE_HFIFO_3_OR_4HDLC	0x08000000
-+
-+/* default = no loopback */
-+#define CCR_LOOPBACK			0x02000000
-+
-+/* HSS number, default = 0 (first) */
-+#define CCR_SECOND_HSS			0x01000000
-+
-+
-+/* hss_config, clkCR: main:10, num:10, denom:12 */
-+#define CLK42X_SPEED_EXP	((0x3FF << 22) | (  2 << 12) |   15) /*65 KHz*/
-+
-+#define CLK42X_SPEED_512KHZ	((  130 << 22) | (  2 << 12) |   15)
-+#define CLK42X_SPEED_1536KHZ	((   43 << 22) | ( 18 << 12) |   47)
-+#define CLK42X_SPEED_1544KHZ	((   43 << 22) | ( 33 << 12) |  192)
-+#define CLK42X_SPEED_2048KHZ	((   32 << 22) | ( 34 << 12) |   63)
-+#define CLK42X_SPEED_4096KHZ	((   16 << 22) | ( 34 << 12) |  127)
-+#define CLK42X_SPEED_8192KHZ	((    8 << 22) | ( 34 << 12) |  255)
-+
-+#define CLK46X_SPEED_512KHZ	((  130 << 22) | ( 24 << 12) |  127)
-+#define CLK46X_SPEED_1536KHZ	((   43 << 22) | (152 << 12) |  383)
-+#define CLK46X_SPEED_1544KHZ	((   43 << 22) | ( 66 << 12) |  385)
-+#define CLK46X_SPEED_2048KHZ	((   32 << 22) | (280 << 12) |  511)
-+#define CLK46X_SPEED_4096KHZ	((   16 << 22) | (280 << 12) | 1023)
-+#define CLK46X_SPEED_8192KHZ	((    8 << 22) | (280 << 12) | 2047)
-+
-+
-+/* hss_config, LUT entries */
-+#define TDMMAP_UNASSIGNED	0
-+#define TDMMAP_HDLC		1	/* HDLC - packetized */
-+#define TDMMAP_VOICE56K		2	/* Voice56K - 7-bit channelized */
-+#define TDMMAP_VOICE64K		3	/* Voice64K - 8-bit channelized */
-+
-+/* offsets into HSS config */
-+#define HSS_CONFIG_TX_PCR	0x00 /* port configuration registers */
-+#define HSS_CONFIG_RX_PCR	0x04
-+#define HSS_CONFIG_CORE_CR	0x08 /* loopback control, HSS# */
-+#define HSS_CONFIG_CLOCK_CR	0x0C /* clock generator control */
-+#define HSS_CONFIG_TX_FCR	0x10 /* frame configuration registers */
-+#define HSS_CONFIG_RX_FCR	0x14
-+#define HSS_CONFIG_TX_LUT	0x18 /* channel look-up tables */
-+#define HSS_CONFIG_RX_LUT	0x38
-+
-+
-+/* NPE command codes */
-+/* writes the ConfigWord value to the location specified by offset */
-+#define PORT_CONFIG_WRITE		0x40
-+
-+/* triggers the NPE to load the contents of the configuration table */
-+#define PORT_CONFIG_LOAD		0x41
-+
-+/* triggers the NPE to return an HssErrorReadResponse message */
-+#define PORT_ERROR_READ			0x42
-+
-+/* reset NPE internal status and enable the HssChannelized operation */
-+#define CHAN_FLOW_ENABLE		0x43
-+#define CHAN_FLOW_DISABLE		0x44
-+#define CHAN_IDLE_PATTERN_WRITE		0x45
-+#define CHAN_NUM_CHANS_WRITE		0x46
-+#define CHAN_RX_BUF_ADDR_WRITE		0x47
-+#define CHAN_RX_BUF_CFG_WRITE		0x48
-+#define CHAN_TX_BLK_CFG_WRITE		0x49
-+#define CHAN_TX_BUF_ADDR_WRITE		0x4A
-+#define CHAN_TX_BUF_SIZE_WRITE		0x4B
-+#define CHAN_TSLOTSWITCH_ENABLE		0x4C
-+#define CHAN_TSLOTSWITCH_DISABLE	0x4D
-+
-+/* downloads the gainWord value for a timeslot switching channel associated
-+   with bypassNum */
-+#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD	0x4E
-+
-+/* triggers the NPE to reset internal status and enable the HssPacketized
-+   operation for the flow specified by pPipe */
-+#define PKT_PIPE_FLOW_ENABLE		0x50
-+#define PKT_PIPE_FLOW_DISABLE		0x51
-+#define PKT_NUM_PIPES_WRITE		0x52
-+#define PKT_PIPE_FIFO_SIZEW_WRITE	0x53
-+#define PKT_PIPE_HDLC_CFG_WRITE		0x54
-+#define PKT_PIPE_IDLE_PATTERN_WRITE	0x55
-+#define PKT_PIPE_RX_SIZE_WRITE		0x56
-+#define PKT_PIPE_MODE_WRITE		0x57
-+
-+/* HDLC packet status values - desc->status */
-+#define ERR_SHUTDOWN		1 /* stop or shutdown occurrance */
-+#define ERR_HDLC_ALIGN		2 /* HDLC alignment error */
-+#define ERR_HDLC_FCS		3 /* HDLC Frame Check Sum error */
-+#define ERR_RXFREE_Q_EMPTY	4 /* RX-free queue became empty while receiving
-+				     this packet (if buf_len < pkt_len) */
-+#define ERR_HDLC_TOO_LONG	5 /* HDLC frame size too long */
-+#define ERR_HDLC_ABORT		6 /* abort sequence received */
-+#define ERR_DISCONNECTING	7 /* disconnect is in progress */
-+
-+#define CLOCK_EXT 0
-+#define CLOCK_INT 1
-+
-+enum mode {MODE_HDLC = 0, MODE_RAW, MODE_G704};
-+enum rx_tx_bit {
-+	TX_BIT = 0,
-+	RX_BIT = 1
-+};
-+enum chan_bit {
-+	CHAN_0 = (1 << 0),
-+	CHAN_1 = (1 << 1),
-+	CHAN_2 = (1 << 2),
-+	CHAN_3 = (1 << 3),
-+	CHAN_4 = (1 << 4),
-+	CHAN_5 = (1 << 5),
-+	CHAN_6 = (1 << 6),
-+	CHAN_7 = (1 << 7),
-+	CHAN_8 = (1 << 8),
-+	CHAN_9 = (1 << 9),
-+	CHAN_10 = (1 << 10),
-+	CHAN_11 = (1 << 11),
-+	CHAN_12 = (1 << 12),
-+	CHAN_13 = (1 << 13),
-+	CHAN_14 = (1 << 14),
-+	CHAN_15 = (1 << 15)
-+};
-+
-+enum alignment { NOT_ALIGNED = 0, EVEN_FIRST, ODD_FIRST };
-+
-+#ifdef __ARMEB__
-+typedef struct sk_buff buffer_t;
-+#define free_buffer dev_kfree_skb
-+#define free_buffer_irq dev_kfree_skb_irq
-+#else
-+typedef void buffer_t;
-+#define free_buffer kfree
-+#define free_buffer_irq kfree
-+#endif
-+
-+struct hss_device {
-+	struct port *port;
-+	unsigned int open_count, excl_open;
-+	unsigned long tx_loc, rx_loc; /* bytes */
-+	unsigned long tx_frame, rx_frame; /* Frames */
-+	u8 id, chan_count;
-+	u8 log_channels[MAX_CHANNELS];
-+
-+  u8 *rx_buf;
-+  u8 *tx_buf;
-+
-+	size_t rx_buffer_size;
-+	size_t rx_period_size;
-+	size_t tx_buffer_size;
-+	size_t tx_period_size;
-+
-+  void (*rx_callback)(void *data);
-+  void *rx_data;
-+  void (*tx_callback)(void *data);
-+  void *tx_data;
-+  void *private_data;
-+};
-+
-+extern struct hss_device *hss_handle[32];
-+extern struct port *hss_port[2];
-+
-+struct port {
-+	unsigned char init;
-+
-+	struct device *dev;
-+
-+	struct tasklet_struct task;
-+	unsigned int id;
-+	unsigned long chan_rx_bitmap;
-+	unsigned long chan_tx_bitmap;
-+	unsigned char chan_open;
-+
-+	/* the following fields must be protected by npe_lock */
-+	enum mode mode;
-+	unsigned int clock_type, clock_rate, loopback;
-+	unsigned int frame_size, frame_sync_offset;
-+	unsigned int next_rx_frame;
-+
-+	struct hss_device *chan_devices[MAX_CHAN_DEVICES];
-+	u32 chan_tx_buf_phys, chan_rx_buf_phys;
-+	u32	chan_tx_pointers_phys;
-+	u32 *chan_tx_pointers;
-+	u8 *chan_rx_buf;
-+	u8 *chan_tx_buf;
-+	u8 *tx_lists[CHAN_TX_LISTS][8];
-+	u8 *rx_frames[8][CHAN_TX_LISTS];
-+	unsigned int chan_open_count, hdlc_open;
-+	unsigned int chan_started, initialized, just_set_offset;
-+	unsigned int chan_last_rx, chan_last_tx;
-+
-+	/* assigned channels, may be invalid with given frame length or mode */
-+	u8 channels[MAX_CHANNELS];
-+	int msg_count;
-+};
-+
-+/* NPE message structure */
-+struct msg {
-+#ifdef __ARMEB__
-+	u8 cmd, unused, hss_port, index;
-+	union {
-+		struct { u8 data8a, data8b, data8c, data8d; };
-+		struct { u16 data16a, data16b; };
-+		struct { u32 data32; };
-+	};
-+#else
-+	u8 index, hss_port, unused, cmd;
-+	union {
-+		struct { u8 data8d, data8c, data8b, data8a; };
-+		struct { u16 data16b, data16a; };
-+		struct { u32 data32; };
-+	};
-+#endif
-+};
-+
-+#define rx_desc_phys(port, n)	((port)->desc_tab_phys +		\
-+				 (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n)	(&(port)->desc_tab[n])
-+
-+#define tx_desc_phys(port, n)	((port)->desc_tab_phys +		\
-+				 ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n)	(&(port)->desc_tab[(n) + RX_DESCS])
-+
-+int hss_prepare_chan(struct port *port);
-+void hss_chan_stop(struct port *port);
-+
-+struct hss_device *hss_init(int id, int channel);
-+int hss_chan_open(struct hss_device *hdev);
-+int hss_chan_close(struct hss_device *hdev);
-+
-+int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data);
-+int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data);
-+int hss_tx_start(struct hss_device *hdev);
-+int hss_tx_stop(struct hss_device *hdev);
-+int hss_rx_start(struct hss_device *hdev);
-+int hss_rx_stop(struct hss_device *hdev);
-+
-+int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
-+int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
-+unsigned long hss_curr_offset_rx(struct hss_device *hdev);
-+unsigned long hss_curr_offset_tx(struct hss_device *hdev);
-+
diff --git a/target/linux/ixp4xx/patches-4.9/180-tw5334_support.patch b/target/linux/ixp4xx/patches-4.9/180-tw5334_support.patch
deleted file mode 100644
index b56fbb732d..0000000000
--- a/target/linux/ixp4xx/patches-4.9/180-tw5334_support.patch
+++ /dev/null
@@ -1,287 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -160,6 +160,14 @@ config ARCH_PRPMC1100
- 	  PrPCM1100 Processor Mezanine Module. For more information on
- 	  this platform, see <file:Documentation/arm/IXP4xx>.
- 
-+config MACH_TW5334
-+	bool "Titan Wireless TW-533-4"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support the Titan
-+	  Wireless TW533-4. For more information on this platform,
-+	  see http://openwrt.org
-+
- config MACH_NAS100D
- 	bool
- 	prompt "NAS100D"
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
- obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
- 
- obj-y	+= common.o
- 
-@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
- obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
-+obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -44,7 +44,7 @@ static __inline__ void __arch_decomp_set
- 	    machine_is_gateway7001() || machine_is_wg302v2() ||
- 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
--	    machine_is_wrt300nv2())
-+	    machine_is_wrt300nv2() || machine_is_tw5334())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/tw5334-pci.c
-+ *
-+ * PCI setup routines for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init tw5334_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw5334_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 12)
-+		return IRQ_IXP4XX_GPIO6;
-+	else if (slot == 13)
-+		return IRQ_IXP4XX_GPIO2;
-+	else if (slot == 14)
-+		return IRQ_IXP4XX_GPIO1;
-+	else if (slot == 15)
-+		return IRQ_IXP4XX_GPIO0;
-+	else return -1;
-+}
-+
-+struct hw_pci tw5334_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit =        tw5334_pci_preinit,
-+	.ops =            &ixp4xx_ops,
-+	.setup =          ixp4xx_setup,
-+	.map_irq =        tw5334_map_irq,
-+};
-+
-+int __init tw5334_pci_init(void)
-+{
-+	if (machine_is_tw5334())
-+		pci_common_init(&tw5334_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(tw5334_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -0,0 +1,167 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw5334-setup.c
-+ *
-+ * Board setup for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data tw5334_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource tw5334_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw5334_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &tw5334_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &tw5334_flash_resource,
-+};
-+
-+static struct resource tw5334_uart_resource = {
-+	.start	= IXP4XX_UART2_BASE_PHYS,
-+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port tw5334_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device tw5334_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev			= {
-+		.platform_data	= tw5334_uart_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &tw5334_uart_resource,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw5334_plat_eth[] = {
-+        {
-+                .phy            = 0,
-+                .rxq            = 3,
-+		.txreadyq	= 20,
-+        }, {
-+                .phy            = 1,
-+                .rxq            = 4,
-+		.txreadyq	= 21,
-+	}
-+};
-+
-+static struct platform_device tw5334_eth[] = {
-+        {
-+                .name                   = "ixp4xx_eth",
-+                .id                     = IXP4XX_ETH_NPEB,
-+                .dev.platform_data      = tw5334_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+        }, {
-+                .name                   = "ixp4xx_eth",
-+                .id                     = IXP4XX_ETH_NPEC,
-+                .dev.platform_data      = tw5334_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct platform_device *tw5334_devices[] __initdata = {
-+	&tw5334_flash,
-+	&tw5334_uart,
-+	&tw5334_eth[0],
-+	&tw5334_eth[1],
-+};
-+
-+static void __init tw5334_init(void)
-+{
-+	uint8_t __iomem *f;
-+	int i;
-+
-+	ixp4xx_sys_init();
-+
-+	tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+	platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
-+
-+	/*
-+	 * Map in a portion of the flash and read the MAC addresses.
-+	 * Since it is stored in BE in the flash itself, we need to
-+	 * byteswap it if we're in LE mode.
-+	 */
-+	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-+	if (f) {
-+		for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+			tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
-+			tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
-+#else
-+			tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
-+			tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
-+#endif
-+		}
-+		iounmap(f);
-+	}
-+
-+	printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n",
-+		tw5334_plat_eth[0].hwaddr);
-+	printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n",
-+		tw5334_plat_eth[1].hwaddr);
-+}
-+
-+#ifdef CONFIG_MACH_TW5334
-+MACHINE_START(TW5334, "Titan Wireless TW-533-4")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= tw5334_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-4.9/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-4.9/185-mi424wr_support.patch
deleted file mode 100644
index 7c229276fc..0000000000
--- a/target/linux/ixp4xx/patches-4.9/185-mi424wr_support.patch
+++ /dev/null
@@ -1,504 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
- CONFIG_MACH_DSMG600=y
- CONFIG_MACH_FSG=y
- CONFIG_MACH_GTWX5715=y
-+CONFIG_MACH_MI424WR=y
- CONFIG_IXP4XX_QMGR=y
- CONFIG_IXP4XX_NPE=y
- # CONFIG_ARM_THUMB is not set
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -258,6 +258,13 @@ config MACH_MIC256
- 	  Say 'Y' here if you want your kernel to support the MIC256
- 	  board from OMICRON electronics GmbH.
- 
-+config MACH_MI424WR
-+	bool "Actiontec MI424WR"
-+	depends on ARCH_IXP4XX
-+	select PCI
-+	help
-+		Add support for the Actiontec MI424-WR.
-+
- comment "IXP4xx Options"
- 
- config IXP4XX_INDIRECT_PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixd
- obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
-+obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
- 
- obj-y	+= common.o
- 
-@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex4
- obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
-+obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
-@@ -0,0 +1,70 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-pci.c
-+ *
-+ * Actiontec MI424WR board-level PCI initialization
-+ *
-+ * Copyright (C) 2008 Jose Vasconcellos
-+ *
-+ * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/pci.h>
-+
-+/* PCI controller GPIO to IRQ pin mappings
-+ * This information was obtained from Actiontec's GPL release.
-+ *
-+ *		INTA		INTB
-+ * SLOT 13	8		6
-+ * SLOT 14	7		8
-+ * SLOT 15	6		7
-+ */
-+
-+void __init mi424wr_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init mi424wr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 13)
-+		return IRQ_IXP4XX_GPIO8;
-+	if (slot == 14)
-+		return IRQ_IXP4XX_GPIO7;
-+	if (slot == 15)
-+		return IRQ_IXP4XX_GPIO6;
-+
-+	return -1;
-+}
-+
-+struct hw_pci mi424wr_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit	= mi424wr_pci_preinit,
-+	.ops		= &ixp4xx_ops,
-+	.setup		= ixp4xx_setup,
-+	.map_irq	= mi424wr_map_irq,
-+};
-+
-+int __init mi424wr_pci_init(void)
-+{
-+	if (machine_is_mi424wr())
-+		pci_common_init(&mi424wr_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(mi424wr_pci_init);
-+
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -0,0 +1,384 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-setup.c
-+ *
-+ * Actiontec MI424-WR board setup
-+ * Copyright (c) 2008 Jose Vasconcellos
-+ *
-+ * Based on Gemtek GTWX5715 by
-+ * Copyright (C) 2004 George T. Joseph
-+ * Derived from Coyote
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/leds.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <asm/system_info.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/*
-+ * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
-+ * and operate as an SPI type interface.  The details of the interface
-+ * are available on Kendin/Micrel's web site.
-+ */
-+
-+#define MI424WR_KSSPI_SELECT		9
-+#define MI424WR_KSSPI_TXD		4
-+#define MI424WR_KSSPI_CLOCK		2
-+#define MI424WR_KSSPI_RXD		3
-+
-+/*
-+ * The "reset" button is wired to GPIO 10.
-+ * The GPIO is brought "low" when the button is pushed.
-+ */
-+
-+#define MI424WR_BUTTON_GPIO	10
-+#define MI424WR_BUTTON_IRQ	IRQ_IXP4XX_GPIO10
-+
-+#define MI424WR_MOCA_WAN_LED	11
-+
-+/* Latch on CS1 - taken from Actiontec's 2.4 source code
-+ *
-+ * default latch value
-+ * 0  - power alarm led (red)           0 (off)
-+ * 1  - power led (green)               0 (off)
-+ * 2  - wireless led    (green)         1 (off)
-+ * 3  - no internet led (red)           0 (off)
-+ * 4  - internet ok led (green)         0 (off)
-+ * 5  - moca LAN                        0 (off)
-+ * 6  - WAN alarm led (red)		0 (off)
-+ * 7  - PCI reset                       1 (not reset)
-+ * 8  - IP phone 1 led (green)          1 (off)
-+ * 9  - IP phone 2 led (green)          1 (off)
-+ * 10 - VOIP ready led (green)          1 (off)
-+ * 11 - PSTN relay 1 control            0 (PSTN)
-+ * 12 - PSTN relay 1 control            0 (PSTN)
-+ * 13 - N/A
-+ * 14 - N/A
-+ * 15 - N/A
-+ */
-+
-+#define MI424WR_LATCH_MASK              0x04
-+#define MI424WR_LATCH_DEFAULT           0x1f86
-+
-+#define MI424WR_LATCH_ALARM_LED         0x00
-+#define MI424WR_LATCH_POWER_LED         0x01
-+#define MI424WR_LATCH_WIRELESS_LED      0x02
-+#define MI424WR_LATCH_INET_DOWN_LED     0x03
-+#define MI424WR_LATCH_INET_OK_LED       0x04
-+#define MI424WR_LATCH_MOCA_LAN_LED      0x05
-+#define MI424WR_LATCH_WAN_ALARM_LED     0x06
-+#define MI424WR_LATCH_PCI_RESET         0x07
-+#define MI424WR_LATCH_PHONE1_LED        0x08
-+#define MI424WR_LATCH_PHONE2_LED        0x09
-+#define MI424WR_LATCH_VOIP_LED          0x10
-+#define MI424WR_LATCH_PSTN_RELAY1       0x11
-+#define MI424WR_LATCH_PSTN_RELAY2       0x12
-+
-+/* initialize CS1 to default timings, Intel style, 16-bit bus */
-+#define MI424WR_CS1_CONFIG	0x80000002
-+
-+/* Define both UARTs but they are not easily accessible.
-+ */
-+
-+static struct resource mi424wr_uart_resources[] = {
-+	{
-+		.start	= IXP4XX_UART1_BASE_PHYS,
-+		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.start	= IXP4XX_UART2_BASE_PHYS,
-+		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	}
-+};
-+
-+
-+static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device mi424wr_uart_device = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev.platform_data	= mi424wr_uart_platform_data,
-+	.num_resources	= ARRAY_SIZE(mi424wr_uart_resources),
-+	.resource	= mi424wr_uart_resources,
-+};
-+
-+static struct flash_platform_data mi424wr_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource mi424wr_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device mi424wr_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev.platform_data = &mi424wr_flash_data,
-+	.num_resources	= 1,
-+	.resource	= &mi424wr_flash_resource,
-+};
-+
-+static struct spi_gpio_platform_data mi424wr_spi_platform_data = {
-+        .sck            = MI424WR_KSSPI_CLOCK,
-+        .mosi           = MI424WR_KSSPI_TXD,
-+        .miso           = MI424WR_KSSPI_RXD,
-+        .num_chipselect = 1,
-+};
-+
-+static struct platform_device mi424wr_spi_device = {
-+        .name   = "spi-gpio",
-+        .id     = 1,
-+        .dev.platform_data  = &mi424wr_spi_platform_data,
-+};
-+
-+static struct spi_board_info mi424wr_spi_devices[] __initdata = {
-+       {
-+		.modalias               = "spi-ks8995",
-+		.max_speed_hz           = 500000,
-+		.mode			= SPI_MODE_0,
-+		.bus_num		= 1,
-+		.chip_select            = 0,
-+		.controller_data        = (void *)MI424WR_KSSPI_SELECT,
-+	}
-+};
-+
-+static struct gpio_led mi424wr_gpio_led[] = {
-+	{
-+		.name		= "moca-wan",	/* green led */
-+		.gpio		= MI424WR_MOCA_WAN_LED,
-+		.active_low	= 0,
-+	}
-+};
-+
-+static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
-+	.num_leds	= 1,
-+	.leds		= mi424wr_gpio_led,
-+};
-+
-+static struct platform_device mi424wr_gpio_leds = {
-+	.name		= "leds-gpio",
-+	.id		= -1,
-+	.dev.platform_data = &mi424wr_gpio_leds_data,
-+};
-+
-+static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
-+static uint16_t __iomem *iobase;
-+
-+static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
-+{
-+
-+	if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
-+		latch_value &= ~(0x1 << bit);
-+	else
-+		latch_value |= (0x1 << bit);
-+
-+	__raw_writew(latch_value, iobase);
-+
-+}
-+
-+static struct latch_led mi424wr_latch_led[] = {
-+	{
-+		.name	= "power-alarm",
-+		.bit	= MI424WR_LATCH_ALARM_LED,
-+	},
-+	{
-+		.name	= "power-ok",
-+		.bit	= MI424WR_LATCH_POWER_LED,
-+	},
-+	{
-+		.name	= "wireless",	/* green led */
-+		.bit	= MI424WR_LATCH_WIRELESS_LED,
-+	},
-+	{
-+		.name	= "inet-down",	/* red led */
-+		.bit	= MI424WR_LATCH_INET_DOWN_LED,
-+	},
-+	{
-+		.name	= "inet-up",	/* green led */
-+		.bit	= MI424WR_LATCH_INET_OK_LED,
-+	},
-+	{
-+		.name	= "moca-lan",	/* green led */
-+		.bit	= MI424WR_LATCH_MOCA_LAN_LED,
-+	},
-+	{
-+		.name	= "wan-alarm",	/* red led */
-+		.bit	= MI424WR_LATCH_WAN_ALARM_LED,
-+	}
-+};
-+
-+static struct latch_led_platform_data mi424wr_latch_leds_data = {
-+	.num_leds	= ARRAY_SIZE(mi424wr_latch_led),
-+	.mem		= 0x51000000,
-+	.leds		= mi424wr_latch_led,
-+	.set_led        = mi424wr_latch_set_led,
-+};
-+
-+static struct platform_device mi424wr_latch_leds = {
-+	.name		= "leds-latch",
-+	.id		= -1,
-+	.dev.platform_data = &mi424wr_latch_leds_data,
-+};
-+
-+static struct eth_plat_info mi424wr_wan_data = {
-+	.phy		= 17,	/* KS8721 */
-+	.rxq		= 3,
-+	.txreadyq	= 20,
-+};
-+
-+static struct eth_plat_info mi424wr_lan_data = {
-+	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
-+	.rxq		= 4,
-+	.txreadyq	= 21,
-+};
-+
-+static struct platform_device mi424wr_npe_devices[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= &mi424wr_lan_data,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= &mi424wr_wan_data,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct eth_plat_info mi424wr_wanD_data = {
-+	.phy		= 5,
-+	.rxq		= 4,
-+	.txreadyq	= 21,
-+};
-+
-+static struct eth_plat_info mi424wr_lanD_data = {
-+	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
-+	.rxq		= 3,
-+	.txreadyq	= 20,
-+};
-+
-+static struct platform_device mi424wr_npeD_devices[] = {
-+	{
-+		.name                   = "ixp4xx_eth",
-+		.id                     = IXP4XX_ETH_NPEB,
-+		.dev.platform_data      = &mi424wr_lanD_data,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name                   = "ixp4xx_eth",
-+		.id                     = IXP4XX_ETH_NPEC,
-+		.dev.platform_data      = &mi424wr_wanD_data,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct platform_device *mi424wr_devices[] __initdata = {
-+	&mi424wr_uart_device,
-+	&mi424wr_flash,
-+	&mi424wr_spi_device,
-+	&mi424wr_gpio_leds,
-+	&mi424wr_latch_leds,
-+};
-+
-+static void __init mi424wr_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
-+
-+	/* configure button as input
-+	 */
-+	gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
-+
-+	/* Initialize LEDs and enables PCI bus.
-+	 */
-+	iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
-+	__raw_writew(latch_value, iobase);
-+
-+	spi_register_board_info(mi424wr_spi_devices, ARRAY_SIZE(mi424wr_spi_devices));
-+	platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
-+
-+	/* Need to figure out how to detect revD.
-+	 * Look for a revision argument sent by redboot.
-+	 */
-+#define revD 4
-+	if (system_rev == revD) {
-+		platform_device_register(&mi424wr_npeD_devices[0]);
-+		platform_device_register(&mi424wr_npeD_devices[1]);
-+	} else {
-+		platform_device_register(&mi424wr_npe_devices[0]);
-+		platform_device_register(&mi424wr_npe_devices[1]);
-+	}
-+}
-+
-+
-+MACHINE_START(MI424WR, "Actiontec MI424WR")
-+	/* Maintainer: Jose Vasconcellos */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= mi424wr_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
-+
diff --git a/target/linux/ixp4xx/patches-4.9/190-cambria_support.patch b/target/linux/ixp4xx/patches-4.9/190-cambria_support.patch
deleted file mode 100644
index 83a3319261..0000000000
--- a/target/linux/ixp4xx/patches-4.9/190-cambria_support.patch
+++ /dev/null
@@ -1,1131 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -21,6 +21,14 @@ config MACH_AVILA
- 	  Avila Network Platform. For more information on this platform,
- 	  see <file:Documentation/arm/IXP4xx>.
- 
-+config MACH_CAMBRIA
-+	bool "Cambria"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support the Gateworks
-+	  Cambria series. For more information on this platform,
-+	  see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_LOFT
-     bool "Loft"
-     depends on MACH_AVILA
-@@ -218,7 +226,7 @@ config CPU_IXP46X
- 
- config CPU_IXP43X
- 	bool
--	depends on MACH_KIXRP435
-+	depends on MACH_KIXRP435 || MACH_CAMBRIA
- 	default y
- 
- config MACH_GTWX5715
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n	:=
- 
- obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
-+obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
- obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
- obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
- obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
-@@ -31,6 +32,7 @@ obj-y	+= common.o
- 
- obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
-+obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
- obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
-@@ -0,0 +1,78 @@
-+/*
-+ * arch/arch/mach-ixp4xx/cambria-pci.c
-+ *
-+ * PCI setup routines for Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init cambria_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init cambria_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 1)
-+		return IRQ_IXP4XX_GPIO11;
-+	else if (slot == 2)
-+		return IRQ_IXP4XX_GPIO10;
-+	else if (slot == 3)
-+		return IRQ_IXP4XX_GPIO9;
-+	else if (slot == 4)
-+		return IRQ_IXP4XX_GPIO8;
-+	else if (slot == 6)
-+		return IRQ_IXP4XX_GPIO10;
-+	else if (slot == 15)
-+		return IRQ_IXP4XX_GPIO8;
-+
-+	else return -1;
-+}
-+
-+struct hw_pci cambria_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit =        cambria_pci_preinit,
-+	.ops =            &ixp4xx_ops,
-+	.setup =          ixp4xx_setup,
-+	.map_irq =        cambria_map_irq,
-+};
-+
-+int __init cambria_pci_init(void)
-+{
-+	if (machine_is_cambria())
-+		pci_common_init(&cambria_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(cambria_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,1003 @@
-+/*
-+ * arch/arm/mach-ixp4xx/cambria-setup.c
-+ *
-+ * Board setup for the Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2012 Gateworks Corporation <support@gateworks.com>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *         Tim Harvey <tharvey@gateworks.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/gpio.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/platform_data/at24.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <linux/platform_data/pca953x.h>
-+#include <linux/if_ether.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/memory.h>
-+#include <linux/netdevice.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/socket.h>
-+#include <linux/types.h>
-+#include <linux/tty.h>
-+#include <linux/irq.h>
-+#include <linux/usb/ehci_pdriver.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/setup.h>
-+
-+#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
-+
-+struct cambria_board_info {
-+	unsigned char	*model;
-+	void		(*setup)(void);
-+};
-+
-+static struct cambria_board_info *cambria_info __initdata;
-+
-+static struct flash_platform_data cambria_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource cambria_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device cambria_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &cambria_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &cambria_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
-+	.sda_pin	= 7,
-+	.scl_pin	= 6,
-+};
-+
-+static struct platform_device cambria_i2c_gpio = {
-+	.name		= "i2c-gpio",
-+	.id		= 0,
-+	.dev = {
-+		.platform_data	= &cambria_i2c_gpio_data,
-+	},
-+};
-+
-+#ifdef SFP_SERIALID
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
-+	.sda_pin	= 113,
-+	.scl_pin	= 112,
-+	.sda_is_open_drain = 0,
-+	.scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device cambria_i2c_gpio_sfpa = {
-+	.name		= "i2c-gpio",
-+	.id		= 1,
-+	.dev = {
-+		.platform_data	= &cambria_i2c_gpio_sfpa_data,
-+	},
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
-+	.sda_pin	= 115,
-+	.scl_pin	= 114,
-+	.sda_is_open_drain = 0,
-+	.scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device cambria_i2c_gpio_sfpb = {
-+	.name		= "i2c-gpio",
-+	.id		= 2,
-+	.dev = {
-+		.platform_data	= &cambria_i2c_gpio_sfpb_data,
-+	},
-+};
-+#endif // #ifdef SFP_SERIALID
-+
-+static struct eth_plat_info cambria_npec_data = {
-+	.phy		= 1,
-+	.rxq		= 4,
-+	.txreadyq	= 21,
-+};
-+
-+static struct eth_plat_info cambria_npea_data = {
-+	.phy		= 2,
-+	.rxq		= 2,
-+	.txreadyq	= 19,
-+};
-+
-+static struct platform_device cambria_npec_device = {
-+	.name			= "ixp4xx_eth",
-+	.id			= IXP4XX_ETH_NPEC,
-+	.dev.platform_data	= &cambria_npec_data,
-+	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device cambria_npea_device = {
-+	.name			= "ixp4xx_eth",
-+	.id			= IXP4XX_ETH_NPEA,
-+	.dev.platform_data	= &cambria_npea_data,
-+	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+};
-+
-+static struct resource cambria_uart_resource = {
-+	.start	= IXP4XX_UART1_BASE_PHYS,
-+	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port cambria_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device cambria_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev = {
-+		.platform_data	= cambria_uart_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &cambria_uart_resource,
-+};
-+
-+static struct resource cambria_optional_uart_resources[] = {
-+	{
-+		.start	= 0x52000000,
-+		.end	= 0x52000fff,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.start	= 0x53000000,
-+		.end	= 0x53000fff,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.start	= 0x52000000,
-+		.end	= 0x52000fff,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.start	= 0x52000000,
-+		.end	= 0x52000fff,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.start	= 0x52000000,
-+		.end	= 0x52000fff,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.start	= 0x52000000,
-+		.end	= 0x52000fff,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.start	= 0x52000000,
-+		.end	= 0x52000fff,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.start	= 0x53000000,
-+		.end	= 0x53000fff,
-+		.flags	= IORESOURCE_MEM
-+	}
-+};
-+
-+static struct plat_serial8250_port cambria_optional_uart_data[] = {
-+	{
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM_DELAY,
-+		.regshift	= 0,
-+		.uartclk	= 1843200,
-+		.rw_delay	= 10,
-+	},
-+	{
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM_DELAY,
-+		.regshift	= 0,
-+		.uartclk	= 1843200,
-+		.rw_delay	= 10,
-+	},
-+	{
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 0,
-+		.uartclk	= 18432000,
-+	},
-+	{
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 0,
-+		.uartclk	= 18432000,
-+	},
-+	{
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 0,
-+		.uartclk	= 18432000,
-+	},
-+	{
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 0,
-+		.uartclk	= 18432000,
-+	},
-+	{
-+		.flags		= UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 0,
-+		.uartclk	= 18432000,
-+	},
-+  { },
-+};
-+
-+static struct platform_device cambria_optional_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM1,
-+	.dev.platform_data	= cambria_optional_uart_data,
-+	.num_resources	= 2,
-+	.resource	= cambria_optional_uart_resources,
-+};
-+
-+static struct resource cambria_pata_resources[] = {
-+	{
-+		.flags	= IORESOURCE_MEM
-+	},
-+	{
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.name	= "intrq",
-+		.start	= IRQ_IXP4XX_GPIO12,
-+		.end	= IRQ_IXP4XX_GPIO12,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct ixp4xx_pata_data cambria_pata_data = {
-+	.cs0_bits	= 0xbfff3c03,
-+	.cs1_bits	= 0xbfff3c03,
-+};
-+
-+static struct platform_device cambria_pata = {
-+	.name			= "pata_ixp4xx_cf",
-+	.id			= 0,
-+	.dev.platform_data      = &cambria_pata_data,
-+	.num_resources		= ARRAY_SIZE(cambria_pata_resources),
-+	.resource		= cambria_pata_resources,
-+};
-+
-+static struct gpio_led cambria_gpio_leds[] = {
-+	{
-+		.name		= "user",
-+		.gpio		= 5,
-+		.active_low 	= 1,
-+	},
-+	{
-+		.name		= "user2",
-+		.gpio		= 0,
-+		.active_low 	= 1,
-+	},
-+	{
-+		.name		= "user3",
-+		.gpio		= 0,
-+		.active_low 	= 1,
-+	},
-+	{
-+		.name		= "user4",
-+		.gpio		= 0,
-+		.active_low 	= 1,
-+	}
-+};
-+
-+static struct gpio_led_platform_data cambria_gpio_leds_data = {
-+	.num_leds	= 1,
-+	.leds		= cambria_gpio_leds,
-+};
-+
-+static struct platform_device cambria_gpio_leds_device = {
-+	.name		= "leds-gpio",
-+	.id		= -1,
-+	.dev.platform_data = &cambria_gpio_leds_data,
-+};
-+
-+static struct resource cambria_gpio_resources[] = {
-+	{
-+		.name = "gpio",
-+		.flags  = 0,
-+	},
-+};
-+
-+static struct gpio cambria_gpios_gw2350[] = {
-+	// ARM GPIO
-+#if 0 // configured from bootloader
-+	{  0, GPIOF_IN,            "ARM_DIO0" },
-+	{  1, GPIOF_IN,            "ARM_DIO1" },
-+	{  2, GPIOF_IN,            "ARM_DIO2" },
-+	{  3, GPIOF_IN,            "ARM_DIO3" },
-+	{  4, GPIOF_IN,            "ARM_DIO4" },
-+	{  5, GPIOF_IN,            "ARM_DIO5" },
-+	{ 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
-+#endif
-+	{  8, GPIOF_IN,            "ARM_DIO8" },
-+	{  9, GPIOF_IN,            "ARM_DIO9" },
-+};
-+
-+static struct gpio cambria_gpios_gw2358[] = {
-+	// ARM GPIO
-+#if 0 // configured from bootloader
-+	{  0, GPIOF_IN,            "*VINLOW#" },
-+	{  2, GPIOF_IN,            "*GPS_PPS" },
-+	{  3, GPIOF_IN,            "*GPS_IRQ#" },
-+	{  4, GPIOF_IN,            "*RS485_IRQ#" },
-+	{  5, GPIOF_IN,            "*SER_EN#" },
-+	{ 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
-+#endif
-+};
-+
-+static struct gpio cambria_gpios_gw2359[] = {
-+	// ARM GPIO
-+#if 0 // configured from bootloader
-+	{  0, GPIOF_IN,            "*PCA_IRQ#" },
-+	{  1, GPIOF_IN,            "ARM_DIO1" },
-+	{  2, GPIOF_IN,            "ARM_DIO2" },
-+	{  3, GPIOF_IN,            "ARM_DIO3" },
-+	{  4, GPIOF_IN,            "ARM_DIO4" },
-+	{  5, GPIOF_IN,            "ARM_DIO5" },
-+	{  8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
-+#endif
-+	{ 11, GPIOF_OUT_INIT_HIGH, "*SER_EN"   },       // console serial enable
-+	{ 12, GPIOF_IN,            "*GSC_IRQ#" },
-+	{ 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
-+	// GSC GPIO
-+#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+	{100, GPIOF_IN,            "*USER_PB#" },
-+#endif
-+	{103, GPIOF_OUT_INIT_HIGH, "*5V_EN" },         // 5V aux supply enable
-+	{108, GPIOF_IN,            "*SMUXDA0" },
-+	{109, GPIOF_IN,            "*SMUXDA1" },
-+	{110, GPIOF_IN,            "*SMUXDA2" },
-+	{111, GPIOF_IN,            "*SMUXDB0" },
-+	{112, GPIOF_IN,            "*SMUXDB1" },
-+	{113, GPIOF_IN,            "*SMUXDB2" },
-+	// PCA GPIO
-+	{118, GPIOF_IN,            "*USIM2_DET#"},     // USIM2 Detect
-+	{120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCI, 0=FP)
-+	{121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCI, 0=FP)
-+	{122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
-+	{123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" },     // J21/J10
-+	{124, GPIOF_IN,            "*COM1_DSR#" },     // J21/J10
-+	{127, GPIOF_IN,            "PCA_DIO0" },
-+	{128, GPIOF_IN,            "PCA_DIO1" },
-+	{129, GPIOF_IN,            "PCA_DIO2" },
-+	{130, GPIOF_IN,            "PCA_DIO3" },
-+	{131, GPIOF_IN,            "PCA_DIO4" },
-+};
-+
-+static struct gpio cambria_gpios_gw2360[] = {
-+	// ARM GPIO
-+	{  0, GPIOF_IN,            "*PCA_IRQ#" },
-+	{ 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
-+	{ 12, GPIOF_IN,            "*GSC_IRQ#" },
-+	{ 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
-+	// GSC GPIO
-+#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+	{100, GPIOF_IN,            "*USER_PB#" },
-+#endif
-+	{108, GPIOF_OUT_INIT_LOW,  "*ENET1_EN#" },     // ENET1 TX Enable
-+	{109, GPIOF_IN,            "*ENET1_PRES#" },   // ENET1 Detect (0=SFP present)
-+	{110, GPIOF_OUT_INIT_LOW,  "*ENET2_EN#" },     // ENET2 TX Enable
-+	{111, GPIOF_IN,            "*ENET2_PRES#"},    // ENET2 Detect (0=SFP present)
-+	// PCA GPIO
-+	{116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"},      // USIM2 Select (1=Loc, 0=Rem)
-+	{117, GPIOF_IN,            "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
-+	{118, GPIOF_IN,            "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
-+	{120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCIe1, 0=J1)
-+	{121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCIe2, 0=J1)
-+	{122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
-+	{127, GPIOF_IN,            "DIO0" },
-+	{128, GPIOF_IN,            "DIO1" },
-+	{129, GPIOF_IN,            "DIO2" },
-+	{130, GPIOF_IN,            "DIO3" },
-+	{131, GPIOF_IN,            "DIO4" },
-+};
-+
-+static struct latch_led cambria_latch_leds[] = {
-+	{
-+		.name	= "ledA",  /* green led */
-+		.bit	= 0,
-+	},
-+	{
-+		.name	= "ledB",  /* green led */
-+		.bit	= 1,
-+	},
-+	{
-+		.name	= "ledC",  /* green led */
-+		.bit	= 2,
-+	},
-+	{
-+		.name	= "ledD",  /* green led */
-+		.bit	= 3,
-+	},
-+	{
-+		.name	= "ledE",  /* green led */
-+		.bit	= 4,
-+	},
-+	{
-+		.name	= "ledF",  /* green led */
-+		.bit	= 5,
-+	},
-+	{
-+		.name	= "ledG",  /* green led */
-+		.bit	= 6,
-+	},
-+	{
-+		.name	= "ledH",  /* green led */
-+		.bit	= 7,
-+	}
-+};
-+
-+static struct latch_led_platform_data cambria_latch_leds_data = {
-+	.num_leds	= 8,
-+	.leds		= cambria_latch_leds,
-+	.mem		= 0x53F40000,
-+};
-+
-+static struct platform_device cambria_latch_leds_device = {
-+	.name		= "leds-latch",
-+	.id		= -1,
-+	.dev.platform_data = &cambria_latch_leds_data,
-+};
-+
-+static struct resource cambria_usb0_resources[] = {
-+	{
-+		.start	= 0xCD000000,
-+		.end	= 0xCD000300,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.start	= 32,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct resource cambria_usb1_resources[] = {
-+	{
-+		.start	= 0xCE000000,
-+		.end	= 0xCE000300,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	{
-+		.start	= 33,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ehci_dma_mask = ~(u32)0;
-+
-+static struct usb_ehci_pdata cambria_usb_pdata = {
-+	.big_endian_desc = 1,
-+	.big_endian_mmio = 1,
-+	.has_tt = 1,
-+	.caps_offset = 0x100,
-+};
-+
-+static struct platform_device cambria_usb0_device =  {
-+	.name		= "ehci-platform",
-+	.id		= 0,
-+	.resource	= cambria_usb0_resources,
-+	.num_resources	= ARRAY_SIZE(cambria_usb0_resources),
-+	.dev = {
-+		.dma_mask		= &ehci_dma_mask,
-+		.coherent_dma_mask	= 0xffffffff,
-+		.platform_data = &cambria_usb_pdata,
-+	},
-+};
-+
-+static struct platform_device cambria_usb1_device = {
-+	.name		= "ehci-platform",
-+	.id		= 1,
-+	.resource	= cambria_usb1_resources,
-+	.num_resources	= ARRAY_SIZE(cambria_usb1_resources),
-+	.dev = {
-+		.dma_mask		= &ehci_dma_mask,
-+		.coherent_dma_mask	= 0xffffffff,
-+		.platform_data = &cambria_usb_pdata,
-+	},
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
-+	.gpio_base	= 16,
-+	.nr_gpio	= 8,
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
-+	.gpio_base	= 24,
-+	.nr_gpio	= 2,
-+};
-+
-+
-+static struct gpio_keys_button cambria_gpio_buttons[] = {
-+	{
-+		.desc		= "user",
-+		.type		= EV_KEY,
-+		.code		= BTN_0,
-+		.debounce_interval = 6,
-+		.gpio		= 25,
-+	}
-+};
-+
-+static struct gpio_keys_platform_data cambria_gpio_buttons_data = {
-+	.poll_interval	= 500,
-+	.nbuttons	= 1,
-+	.buttons	= cambria_gpio_buttons,
-+};
-+
-+static struct platform_device cambria_gpio_buttons_device = {
-+	.name			= "gpio-keys-polled",
-+	.id			= -1,
-+	.dev.platform_data	= &cambria_gpio_buttons_data,
-+};
-+
-+static struct platform_device *cambria_devices[] __initdata = {
-+	&cambria_i2c_gpio,
-+	&cambria_flash,
-+	&cambria_uart,
-+};
-+
-+static int cambria_register_gpio(struct gpio *array, size_t num)
-+{
-+	int i, err, ret;
-+
-+	ret = 0;
-+	for (i = 0; i < num; i++, array++) {
-+		const char *label = array->label;
-+		if (label[0] == '*')
-+			label++;
-+		err = gpio_request_one(array->gpio, array->flags, label);
-+		if (err)
-+			ret = err;
-+		else {
-+			err = gpio_export(array->gpio, array->label[0] != '*');
-+		}
-+	}
-+	return ret;
-+}
-+
-+static void __init cambria_gw23xx_setup(void)
-+{
-+	cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+																		(1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+	platform_device_register(&cambria_npec_device);
-+	platform_device_register(&cambria_npea_device);
-+}
-+
-+static void __init cambria_gw2350_setup(void)
-+{
-+	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+	cambria_optional_uart_data[0].mapbase	= 0x52FF0000;
-+	cambria_optional_uart_data[0].membase	= (void __iomem *)ioremap(0x52FF0000, 0x0fff);
-+	cambria_optional_uart_data[0].irq		= IRQ_IXP4XX_GPIO3;
-+
-+	*IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+	cambria_optional_uart_data[1].mapbase	= 0x53FF0000;
-+	cambria_optional_uart_data[1].membase	= (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-+	cambria_optional_uart_data[1].irq		= IRQ_IXP4XX_GPIO4;
-+
-+	cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+																		(1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+	platform_device_register(&cambria_optional_uart);
-+	platform_device_register(&cambria_npec_device);
-+	platform_device_register(&cambria_npea_device);
-+
-+	platform_device_register(&cambria_usb0_device);
-+	platform_device_register(&cambria_usb1_device);
-+
-+	platform_device_register(&cambria_gpio_leds_device);
-+
-+	/* gpio config (/sys/class/gpio) */
-+	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
-+}
-+
-+static void __init cambria_gw2358_setup(void)
-+{
-+	*IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+	cambria_optional_uart_data[0].mapbase	= 0x53FC0000;
-+	cambria_optional_uart_data[0].membase	= (void __iomem *)ioremap(0x53FC0000, 0x0fff);
-+	cambria_optional_uart_data[0].irq		= IRQ_IXP4XX_GPIO3;
-+
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+	cambria_optional_uart_data[1].mapbase	= 0x53F80000;
-+	cambria_optional_uart_data[1].membase	= (void __iomem *)ioremap(0x53F80000, 0x0fff);
-+	cambria_optional_uart_data[1].irq		= IRQ_IXP4XX_GPIO4;
-+
-+	cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
-+																		(1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
-+	cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+	platform_device_register(&cambria_optional_uart);
-+
-+	platform_device_register(&cambria_npec_device);
-+	platform_device_register(&cambria_npea_device);
-+
-+	platform_device_register(&cambria_usb0_device);
-+	platform_device_register(&cambria_usb1_device);
-+
-+	platform_device_register(&cambria_pata);
-+
-+	cambria_gpio_leds[0].gpio = 24;
-+	platform_device_register(&cambria_gpio_leds_device);
-+
-+	platform_device_register(&cambria_latch_leds_device);
-+
-+	platform_device_register(&cambria_gpio_buttons_device);
-+
-+	/* gpio config (/sys/class/gpio) */
-+	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
-+}
-+
-+static void __init cambria_gw2359_setup(void)
-+{
-+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
-+	/* The mvswitch driver has some hard-coded values which could
-+	 * easily be turned into a platform resource if needed.  For now they
-+	 * match our hardware configuration:
-+	 *  MV_BASE    0x10 - phy base address
-+	 *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
-+	 *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
-+	 *
-+	 * The mvswitch driver registers a fixup which forces a driver match
-+	 * if phy_addr matches MV_BASE
-+	 *
-+	 * Two static defautl VLAN's are created: WAN port in 1, and all other ports
-+	 * in the other.
-+	 */
-+	cambria_npea_data.phy = 0x10; // mvswitch driver catches this
-+#else
-+	// Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
-+	cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+	// CPU NPE-C is in bridge bypass mode to Port4 PHY@0x14
-+	cambria_npec_data.phy = 0x14;
-+#endif
-+	platform_device_register(&cambria_npec_device);
-+	platform_device_register(&cambria_npea_device);
-+
-+	platform_device_register(&cambria_usb0_device);
-+	platform_device_register(&cambria_usb1_device);
-+
-+	cambria_gpio_leds_data.num_leds = 3;
-+	cambria_gpio_leds[0].name = "user1";
-+	cambria_gpio_leds[0].gpio = 125; // PNLLED1#
-+	cambria_gpio_leds[1].gpio = 126; // PNLLED3#
-+	cambria_gpio_leds[2].gpio = 119; // PNLLED4#
-+	platform_device_register(&cambria_gpio_leds_device);
-+
-+#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+	cambria_gpio_buttons[0].gpio = 100;
-+	platform_device_register(&cambria_gpio_buttons_device);
-+#endif
-+
-+	/* gpio config (/sys/class/gpio) */
-+	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
-+}
-+
-+static void __init cambria_gw2360_setup(void)
-+{
-+	/* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
-+	 * The chip-selects are expanded via a 3-to-8 decoder and CS2
-+	 * and they are 8bit devices
-+	 */
-+	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+	cambria_optional_uart_data[0].mapbase = 0x52000000;
-+	cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+	cambria_optional_uart_data[0].uartclk = 18432000;
-+	cambria_optional_uart_data[0].iotype  = UPIO_MEM;
-+	cambria_optional_uart_data[0].irq     = IRQ_IXP4XX_GPIO2;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+
-+	cambria_optional_uart_data[1].mapbase = 0x52000008;
-+	cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
-+	cambria_optional_uart_data[1].uartclk = 18432000;
-+	cambria_optional_uart_data[1].iotype  = UPIO_MEM;
-+	cambria_optional_uart_data[1].irq     = IRQ_IXP4XX_GPIO3;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+
-+	cambria_optional_uart_data[2].mapbase = 0x52000010;
-+	cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
-+	cambria_optional_uart_data[2].uartclk = 18432000;
-+	cambria_optional_uart_data[2].iotype  = UPIO_MEM;
-+	cambria_optional_uart_data[2].irq     = IRQ_IXP4XX_GPIO4;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+
-+	cambria_optional_uart_data[3].mapbase = 0x52000018;
-+	cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
-+	cambria_optional_uart_data[3].uartclk = 18432000;
-+	cambria_optional_uart_data[3].iotype  = UPIO_MEM;
-+	cambria_optional_uart_data[3].irq     = IRQ_IXP4XX_GPIO5;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
-+
-+	cambria_optional_uart_data[4].mapbase = 0x52000020;
-+	cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
-+	cambria_optional_uart_data[4].uartclk = 18432000;
-+	cambria_optional_uart_data[4].iotype  = UPIO_MEM;
-+	cambria_optional_uart_data[4].irq     = IRQ_IXP4XX_GPIO8;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
-+
-+	cambria_optional_uart_data[5].mapbase = 0x52000028;
-+	cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
-+	cambria_optional_uart_data[5].uartclk = 18432000;
-+	cambria_optional_uart_data[5].iotype  = UPIO_MEM;
-+	cambria_optional_uart_data[5].irq     = IRQ_IXP4XX_GPIO9;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
-+
-+	cambria_optional_uart_data[6].mapbase = 0x52000030;
-+	cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
-+	cambria_optional_uart_data[6].uartclk = 18432000;
-+	cambria_optional_uart_data[6].iotype  = UPIO_MEM;
-+	cambria_optional_uart_data[6].irq     = IRQ_IXP4XX_GPIO10;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
-+
-+	cambria_optional_uart.num_resources   = 7,
-+	platform_device_register(&cambria_optional_uart);
-+
-+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
-+	/* The mvswitch driver has some hard-coded values which could
-+	 * easily be turned into a platform resource if needed.  For now they
-+	 * match our hardware configuration:
-+	 *  MV_BASE    0x10 - phy base address
-+	 *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
-+	 *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
-+	 *
-+	 * The mvswitch driver registers a fixup which forces a driver match
-+	 * if phy_addr matches MV_BASE
-+	 *
-+	 * Two static defautl VLAN's are created: WAN port in 1, and all other ports
-+	 * in the other.
-+	 */
-+	cambria_npea_data.phy = 0x10; // mvswitch driver catches this
-+#else
-+	// Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
-+	cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+#endif
-+
-+	// disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
-+	//cambria_npec_data.noautoneg = 1;   // disable autoneg
-+	cambria_npec_data.speed_10 = 0;    // 100mbps
-+	cambria_npec_data.half_duplex = 0; // full-duplex
-+	platform_device_register(&cambria_npec_device);
-+	platform_device_register(&cambria_npea_device);
-+
-+	platform_device_register(&cambria_usb0_device);
-+	platform_device_register(&cambria_usb1_device);
-+
-+	cambria_gpio_leds_data.num_leds = 3;
-+	cambria_gpio_leds[0].name = "user1";
-+	cambria_gpio_leds[0].gpio = 125;
-+	cambria_gpio_leds[1].gpio = 126;
-+	cambria_gpio_leds[2].gpio = 119;
-+	platform_device_register(&cambria_gpio_leds_device);
-+
-+#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+	cambria_gpio_buttons[0].gpio = 100;
-+	platform_device_register(&cambria_gpio_buttons_device);
-+#endif
-+
-+#ifdef SFP_SERIALID
-+	/* the SFP modules each have an i2c bus for serial ident via GSC GPIO
-+	 * To use these the i2c-gpio driver must be changed to use the _cansleep
-+	 * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
-+	 * use that anyway as it doesn't operate in an IRQ context).
-+	 * Additionally the i2c-gpio module must set the gpio to output-high prior
-+	 * to changing direction to an input to enable internal Pullups
-+	 */
-+	platform_device_register(&cambria_i2c_gpio_sfpa);
-+	platform_device_register(&cambria_i2c_gpio_sfpb);
-+#endif
-+
-+	/* gpio config (/sys/class/gpio) */
-+	cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
-+}
-+
-+static struct cambria_board_info cambria_boards[] __initdata = {
-+	{
-+		.model	= "GW2350",
-+		.setup	= cambria_gw2350_setup,
-+	}, {
-+		.model	= "GW2351",
-+		.setup	= cambria_gw2350_setup,
-+	}, {
-+		.model	= "GW2358",
-+		.setup	= cambria_gw2358_setup,
-+	}, {
-+		.model	= "GW2359",
-+		.setup	= cambria_gw2359_setup,
-+	}, {
-+		.model	= "GW2360",
-+		.setup	= cambria_gw2360_setup,
-+	}, {
-+		.model	= "GW2371",
-+		.setup	= cambria_gw2358_setup,
-+	}
-+};
-+
-+static struct cambria_board_info * __init cambria_find_board_info(char *model)
-+{
-+	int i;
-+	model[6] = '\0';
-+
-+	for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
-+		struct cambria_board_info *info = &cambria_boards[i];
-+		if (strcmp(info->model, model) == 0)
-+			return info;
-+	}
-+
-+	return NULL;
-+}
-+
-+static struct nvmem_device *at24_nvmem;
-+
-+static void at24_setup(struct nvmem_device *mem_acc, void *context)
-+{
-+	char mac_addr[ETH_ALEN];
-+	char model[7];
-+
-+	at24_nvmem = mem_acc;
-+
-+	/* Read MAC addresses */
-+	if (nvmem_device_read(at24_nvmem, 0x0, 6, mac_addr) == 6) {
-+		memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+	}
-+	if (nvmem_device_read(at24_nvmem, 0x6, 6, mac_addr) == 6) {
-+		memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
-+	}
-+
-+	/* Read the first 6 bytes of the model number */
-+	if (nvmem_device_read(at24_nvmem, 0x20, 6, model) == 6) {
-+		cambria_info = cambria_find_board_info(model);
-+	}
-+
-+}
-+
-+static struct at24_platform_data cambria_eeprom_info = {
-+	.byte_len	= 1024,
-+	.page_size	= 16,
-+	.flags		= AT24_FLAG_READONLY,
-+	.setup		= at24_setup,
-+};
-+
-+static struct pca953x_platform_data cambria_pca_data = {
-+	.gpio_base = 100,
-+	.irq_base = -1,
-+};
-+
-+static struct pca953x_platform_data cambria_pca2_data = {
-+	.gpio_base = 116,
-+	.irq_base = -1,
-+};
-+
-+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
-+	{
-+		I2C_BOARD_INFO("pca9555", 0x23),
-+		.platform_data = &cambria_pca_data,
-+	},
-+	{
-+		I2C_BOARD_INFO("pca9555", 0x27),
-+		.platform_data = &cambria_pca2_data,
-+	},
-+	{
-+		I2C_BOARD_INFO("ds1672", 0x68),
-+	},
-+	{
-+		I2C_BOARD_INFO("gsp", 0x29),
-+	},
-+	{
-+		I2C_BOARD_INFO("ad7418", 0x28),
-+	},
-+	{
-+		I2C_BOARD_INFO("24c08", 0x51),
-+		.platform_data	= &cambria_eeprom_info
-+	},
-+	{
-+		I2C_BOARD_INFO("gw_i2c_pld", 0x56),
-+		.platform_data	= &gw_i2c_pld_data0,
-+	},
-+	{
-+		I2C_BOARD_INFO("gw_i2c_pld", 0x57),
-+		.platform_data	= &gw_i2c_pld_data1,
-+	},
-+};
-+
-+static void __init cambria_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
-+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+	platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
-+
-+	cambria_pata_resources[0].start = 0x53e00000;
-+	cambria_pata_resources[0].end = 0x53e3ffff;
-+
-+	cambria_pata_resources[1].start = 0x53e40000;
-+	cambria_pata_resources[1].end = 0x53e7ffff;
-+
-+	cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+	cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+	i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
-+}
-+
-+static int __init cambria_model_setup(void)
-+{
-+	if (!machine_is_cambria())
-+		return 0;
-+
-+	if (cambria_info) {
-+		printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
-+				cambria_info->model);
-+		cambria_info->setup();
-+	} else {
-+		printk(KERN_INFO "Unknown/missing Cambria model number"
-+				" -- defaults will be used\n");
-+		cambria_gw23xx_setup();
-+	}
-+
-+	return 0;
-+}
-+late_initcall(cambria_model_setup);
-+
-+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= cambria_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.9/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-4.9/201-npe_driver_print_license_location.patch
deleted file mode 100644
index f46b9c61bf..0000000000
--- a/target/linux/ixp4xx/patches-4.9/201-npe_driver_print_license_location.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -586,6 +586,8 @@ int npe_load_firmware(struct npe *npe, c
- 	npe_reset(npe);
- #endif
- 
-+	print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
-+
- 	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
- 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
- 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-4.9/205-npe_driver_separate_phy_functions.patch b/target/linux/ixp4xx/patches-4.9/205-npe_driver_separate_phy_functions.patch
deleted file mode 100644
index cc77c5dddc..0000000000
--- a/target/linux/ixp4xx/patches-4.9/205-npe_driver_separate_phy_functions.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From e3eab80fb5d0a7d7fdb0f2f231b27161d5ec3804 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Jun 2013 15:52:53 +0200
-Subject: [PATCH 23/36] 205-npe_driver_separate_phy_functions.patch
-
----
- drivers/net/ethernet/xscale/ixp4xx_eth.c |   70 ++++++++++++++++++++++--------
- 1 file changed, 51 insertions(+), 19 deletions(-)
-
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -588,6 +588,51 @@ static void ixp4xx_adjust_link(struct ne
- 	       dev->name, port->speed, port->duplex ? "full" : "half");
- }
- 
-+static int ixp4xx_phy_connect(struct net_device *dev)
-+{
-+	struct port *port = netdev_priv(dev);
-+	struct eth_plat_info *plat = port->plat;
-+	char phy_id[MII_BUS_ID_SIZE + 3];
-+
-+	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-+		mdio_bus->id, plat->phy);
-+	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
-+				   PHY_INTERFACE_MODE_MII);
-+	if (IS_ERR(port->phydev)) {
-+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+		return PTR_ERR(port->phydev);
-+	}
-+
-+	/* mask with MAC supported features */
-+	port->phydev->supported &= PHY_BASIC_FEATURES;
-+	port->phydev->advertising = port->phydev->supported;
-+
-+	port->phydev->irq = PHY_POLL;
-+
-+	return 0;
-+}
-+
-+static void ixp4xx_phy_disconnect(struct net_device *dev)
-+{
-+	struct port *port = netdev_priv(dev);
-+
-+	phy_disconnect(port->phydev);
-+}
-+
-+static void ixp4xx_phy_start(struct net_device *dev)
-+{
-+	struct port *port = netdev_priv(dev);
-+
-+	port->speed = 0;	/* force "link up" message */
-+	phy_start(port->phydev);
-+}
-+
-+static void ixp4xx_phy_stop(struct net_device *dev)
-+{
-+	struct port *port = netdev_priv(dev);
-+
-+	phy_stop(port->phydev);
-+}
- 
- static inline void debug_pkt(struct net_device *dev, const char *func,
- 			     u8 *data, int len)
-@@ -1242,8 +1287,7 @@ static int eth_open(struct net_device *d
- 		return err;
- 	}
- 
--	port->speed = 0;	/* force "link up" message */
--	phy_start(dev->phydev);
-+	ixp4xx_phy_start(dev);
- 
- 	for (i = 0; i < ETH_ALEN; i++)
- 		__raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
-@@ -1364,7 +1408,7 @@ static int eth_close(struct net_device *
- 		printk(KERN_CRIT "%s: unable to disable loopback\n",
- 		       dev->name);
- 
--	phy_stop(dev->phydev);
-+	ixp4xx_phy_stop(dev);
- 
- 	if (!ports_open)
- 		qmgr_disable_irq(TXDONE_QUEUE);
-@@ -1391,7 +1435,6 @@ static int eth_init_one(struct platform_
- 	struct eth_plat_info *plat = dev_get_platdata(&pdev->dev);
- 	struct phy_device *phydev = NULL;
- 	u32 regs_phys;
--	char phy_id[MII_BUS_ID_SIZE + 3];
- 	int err;
- 
- 	if (!(dev = alloc_etherdev(sizeof(struct port))))
-@@ -1449,16 +1492,9 @@ static int eth_init_one(struct platform_
- 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
- 	udelay(50);
- 
--	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
--		mdio_bus->id, plat->phy);
--	phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
--			     PHY_INTERFACE_MODE_MII);
--	if (IS_ERR(phydev)) {
--		err = PTR_ERR(phydev);
-+	err = ixp4xx_phy_connect(dev);
-+	if (err)
- 		goto err_free_mem;
--	}
--
--	phydev->irq = PHY_POLL;
- 
- 	if ((err = register_netdev(dev)))
- 		goto err_phy_dis;
-@@ -1469,7 +1505,7 @@ static int eth_init_one(struct platform_
- 	return 0;
- 
- err_phy_dis:
--	phy_disconnect(phydev);
-+	ixp4xx_phy_disconnect(phydev);
- err_free_mem:
- 	npe_port_tab[NPE_ID(port->id)] = NULL;
- 	release_resource(port->mem_res);
-@@ -1487,7 +1523,7 @@ static int eth_remove_one(struct platfor
- 	struct port *port = netdev_priv(dev);
- 
- 	unregister_netdev(dev);
--	phy_disconnect(phydev);
-+	ixp4xx_phy_disconnect(phydev);
- 	npe_port_tab[NPE_ID(port->id)] = NULL;
- 	npe_release(port->npe);
- 	release_resource(port->mem_res);
diff --git a/target/linux/ixp4xx/patches-4.9/206-npe_driver_add_update_link_function.patch b/target/linux/ixp4xx/patches-4.9/206-npe_driver_add_update_link_function.patch
deleted file mode 100644
index e12764e053..0000000000
--- a/target/linux/ixp4xx/patches-4.9/206-npe_driver_add_update_link_function.patch
+++ /dev/null
@@ -1,100 +0,0 @@
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -171,12 +171,13 @@ struct port {
- 	struct npe *npe;
- 	struct net_device *netdev;
- 	struct napi_struct napi;
-+	struct phy_device *phydev;
- 	struct eth_plat_info *plat;
- 	buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
- 	struct desc *desc_tab;	/* coherent */
- 	u32 desc_tab_phys;
- 	int id;			/* logical port ID */
--	int speed, duplex;
-+	int link, speed, duplex;
- 	u8 firmware[4];
- 	int hwts_tx_en;
- 	int hwts_rx_en;
-@@ -558,36 +559,46 @@ static void ixp4xx_mdio_remove(void)
- }
- 
- 
--static void ixp4xx_adjust_link(struct net_device *dev)
-+static void ixp4xx_update_link(struct net_device *dev)
- {
- 	struct port *port = netdev_priv(dev);
--	struct phy_device *phydev = dev->phydev;
--
--	if (!phydev->link) {
--		if (port->speed) {
--			port->speed = 0;
--			printk(KERN_INFO "%s: link down\n", dev->name);
--		}
--		return;
--	}
--
--	if (port->speed == phydev->speed && port->duplex == phydev->duplex)
--		return;
--
--	port->speed = phydev->speed;
--	port->duplex = phydev->duplex;
- 
--	if (port->duplex)
-+	if (port->duplex == DUPLEX_FULL)
- 		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
- 			     &port->regs->tx_control[0]);
- 	else
- 		__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
- 			     &port->regs->tx_control[0]);
- 
-+	netif_carrier_on(dev);
- 	printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
- 	       dev->name, port->speed, port->duplex ? "full" : "half");
- }
- 
-+static void ixp4xx_adjust_link(struct net_device *dev)
-+{
-+	struct port *port = netdev_priv(dev);
-+	struct phy_device *phydev = port->phydev;
-+	int status_change = 0;
-+
-+	if (phydev->link) {
-+		if (port->duplex != phydev->duplex
-+		    || port->speed != phydev->speed) {
-+			status_change = 1;
-+		}
-+	}
-+
-+	if (phydev->link != port->link)
-+		status_change = 1;
-+
-+	port->link = phydev->link;
-+	port->speed = phydev->speed;
-+	port->duplex = phydev->duplex;
-+
-+	if (status_change)
-+		ixp4xx_update_link(dev);
-+}
-+
- static int ixp4xx_phy_connect(struct net_device *dev)
- {
- 	struct port *port = netdev_priv(dev);
-@@ -623,7 +634,6 @@ static void ixp4xx_phy_start(struct net_
- {
- 	struct port *port = netdev_priv(dev);
- 
--	port->speed = 0;	/* force "link up" message */
- 	phy_start(port->phydev);
- }
- 
-@@ -1499,6 +1509,10 @@ static int eth_init_one(struct platform_
- 	if ((err = register_netdev(dev)))
- 		goto err_phy_dis;
- 
-+	port->link = 0;
-+	port->speed = 0;
-+	port->duplex = -1;
-+
- 	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
- 	       npe_name(port->npe));
- 
diff --git a/target/linux/ixp4xx/patches-4.9/207-npe_driver_multiphy_support.patch b/target/linux/ixp4xx/patches-4.9/207-npe_driver_multiphy_support.patch
deleted file mode 100644
index a23644a167..0000000000
--- a/target/linux/ixp4xx/patches-4.9/207-npe_driver_multiphy_support.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-TODO: take care of additional PHYs through the PHY abstraction layer
-
---- a/arch/arm/mach-ixp4xx/include/mach/platform.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
-@@ -95,12 +95,23 @@ struct ixp4xx_pata_data {
- #define IXP4XX_ETH_NPEB		0x10
- #define IXP4XX_ETH_NPEC		0x20
- 
-+#define IXP4XX_ETH_PHY_MAX_ADDR	32
-+
- /* Information about built-in Ethernet MAC interfaces */
- struct eth_plat_info {
- 	u8 phy;		/* MII PHY ID, 0 - 31 */
- 	u8 rxq;		/* configurable, currently 0 - 31 only */
- 	u8 txreadyq;
- 	u8 hwaddr[6];
-+
-+	u32 phy_mask;
-+#if 0
-+	int speed;
-+	int duplex;
-+#else
-+	int speed_10;
-+	int half_duplex;
-+#endif
- };
- 
- /* Information about built-in HSS (synchronous serial) interfaces */
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -605,6 +605,37 @@ static int ixp4xx_phy_connect(struct net
- 	struct eth_plat_info *plat = port->plat;
- 	char phy_id[MII_BUS_ID_SIZE + 3];
- 
-+	if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
-+#if 0
-+		switch (plat->speed) {
-+		case SPEED_10:
-+		case SPEED_100:
-+			break;
-+		default:
-+			printk(KERN_ERR "%s: invalid speed (%d)\n",
-+					dev->name, plat->speed);
-+			return -EINVAL;
-+		}
-+
-+		switch (plat->duplex) {
-+		case DUPLEX_HALF:
-+		case DUPLEX_FULL:
-+			break;
-+		default:
-+			printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
-+					dev->name, plat->duplex);
-+			return -EINVAL;
-+		}
-+		port->speed = plat->speed;
-+		port->duplex = plat->duplex;
-+#else
-+		port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
-+		port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
-+#endif
-+
-+		return 0;
-+	}
-+
- 	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
- 		mdio_bus->id, plat->phy);
- 	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
-@@ -627,21 +658,32 @@ static void ixp4xx_phy_disconnect(struct
- {
- 	struct port *port = netdev_priv(dev);
- 
--	phy_disconnect(port->phydev);
-+	if (port->phydev)
-+		phy_disconnect(port->phydev);
- }
- 
- static void ixp4xx_phy_start(struct net_device *dev)
- {
- 	struct port *port = netdev_priv(dev);
- 
--	phy_start(port->phydev);
-+	if (port->phydev) {
-+		phy_start(port->phydev);
-+	} else {
-+		port->link = 1;
-+		ixp4xx_update_link(dev);
-+	}
- }
- 
- static void ixp4xx_phy_stop(struct net_device *dev)
- {
- 	struct port *port = netdev_priv(dev);
- 
--	phy_stop(port->phydev);
-+	if (port->phydev) {
-+		phy_stop(port->phydev);
-+	} else {
-+		port->link = 0;
-+		ixp4xx_update_link(dev);
-+	}
- }
- 
- static inline void debug_pkt(struct net_device *dev, const char *func,
-@@ -1030,6 +1072,8 @@ static void eth_set_mcast_list(struct ne
- 
- static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
- {
-+	struct port *port = netdev_priv(dev);
-+
- 	if (!netif_running(dev))
- 		return -EINVAL;
- 
-@@ -1040,6 +1084,9 @@ static int eth_ioctl(struct net_device *
- 			return hwtstamp_get(dev, req);
- 	}
- 
-+	if (!port->phydev)
-+		return -EOPNOTSUPP;
-+
- 	return phy_mii_ioctl(dev->phydev, req, cmd);
- }
- 
-@@ -1059,6 +1106,11 @@ static void ixp4xx_get_drvinfo(struct ne
- 
- static int ixp4xx_nway_reset(struct net_device *dev)
- {
-+	struct port *port = netdev_priv(dev);
-+
-+	if (!port->phydev)
-+		return -EOPNOTSUPP;
-+
- 	return phy_start_aneg(dev->phydev);
- }
- 
-@@ -1519,7 +1571,7 @@ static int eth_init_one(struct platform_
- 	return 0;
- 
- err_phy_dis:
--	ixp4xx_phy_disconnect(phydev);
-+	ixp4xx_phy_disconnect(port->netdev);
- err_free_mem:
- 	npe_port_tab[NPE_ID(port->id)] = NULL;
- 	release_resource(port->mem_res);
-@@ -1537,7 +1589,7 @@ static int eth_remove_one(struct platfor
- 	struct port *port = netdev_priv(dev);
- 
- 	unregister_netdev(dev);
--	ixp4xx_phy_disconnect(phydev);
-+	ixp4xx_phy_disconnect(port->netdev);
- 	npe_port_tab[NPE_ID(port->id)] = NULL;
- 	npe_release(port->npe);
- 	release_resource(port->mem_res);
diff --git a/target/linux/ixp4xx/patches-4.9/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-4.9/295-latch_led_driver.patch
deleted file mode 100644
index 66bc3e86b0..0000000000
--- a/target/linux/ixp4xx/patches-4.9/295-latch_led_driver.patch
+++ /dev/null
@@ -1,201 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -312,6 +312,12 @@ config LEDS_LP8860
- 	  on the LP8860 4 channel LED driver using the I2C communication
- 	  bus.
- 
-+config LEDS_LATCH
-+	tristate "LED Support for Memory Latched LEDs"
-+	depends on LEDS_CLASS
-+	help
-+		-- To Do --
-+
- config LEDS_CLEVO_MAIL
- 	tristate "Mail LED on Clevo notebook"
- 	depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunf
- obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
- obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
- obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
-+obj-$(CONFIG_LEDS_LATCH)		+= leds-latch.o
- obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
- obj-$(CONFIG_LEDS_LP3952)		+= leds-lp3952.o
- obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
---- /dev/null
-+++ b/drivers/leds/leds-latch.c
-@@ -0,0 +1,152 @@
-+/*
-+ * LEDs driver for Memory Latched Devices
-+ *
-+ * Copyright (C) 2008 Gateworks Corp.
-+ * Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
-+#include <asm/io.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/export.h>
-+
-+static unsigned int mem_keep = 0xFF;
-+static spinlock_t mem_lock;
-+static unsigned char *iobase;
-+
-+struct latch_led_data {
-+	struct led_classdev cdev;
-+	struct work_struct work;
-+	u8 new_level;
-+	u8 bit;
-+	void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
-+static void latch_set_led(u8 bit, enum led_brightness value)
-+{
-+	if (value == LED_OFF)
-+		mem_keep |= (0x1 << bit);
-+	else
-+		mem_keep &= ~(0x1 << bit);
-+
-+	writeb(mem_keep, iobase);
-+}
-+
-+static void latch_led_set(struct led_classdev *led_cdev,
-+	enum led_brightness value)
-+{
-+	struct latch_led_data *led_dat =
-+		container_of(led_cdev, struct latch_led_data, cdev);
-+
-+	raw_spin_lock(mem_lock);
-+
-+	led_dat->set_led(led_dat->bit, value);
-+
-+	raw_spin_unlock(mem_lock);
-+}
-+
-+static int latch_led_probe(struct platform_device *pdev)
-+{
-+	struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct latch_led *cur_led;
-+	struct latch_led_data *leds_data, *led_dat;
-+	int i, ret = 0;
-+
-+	if (!pdata)
-+		return -EBUSY;
-+
-+	leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
-+				GFP_KERNEL);
-+	if (!leds_data)
-+		return -ENOMEM;
-+
-+	for (i = 0; i < pdata->num_leds; i++) {
-+		cur_led = &pdata->leds[i];
-+		led_dat = &leds_data[i];
-+
-+		led_dat->cdev.name = cur_led->name;
-+		led_dat->cdev.default_trigger = cur_led->default_trigger;
-+		led_dat->cdev.brightness_set = latch_led_set;
-+		led_dat->cdev.brightness = LED_OFF;
-+		led_dat->bit = cur_led->bit;
-+		led_dat->set_led = pdata->set_led ? pdata->set_led : latch_set_led;
-+
-+		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+		if (ret < 0) {
-+			goto err;
-+		}
-+	}
-+
-+	if (!pdata->set_led) {
-+		iobase = ioremap_nocache(pdata->mem, 0x1000);
-+		writeb(0xFF, iobase);
-+	}
-+	platform_set_drvdata(pdev, leds_data);
-+
-+	return 0;
-+
-+err:
-+	if (i > 0) {
-+		for (i = i - 1; i >= 0; i--) {
-+			led_classdev_unregister(&leds_data[i].cdev);
-+		}
-+	}
-+
-+	kfree(leds_data);
-+
-+	return ret;
-+}
-+
-+static int latch_led_remove(struct platform_device *pdev)
-+{
-+	int i;
-+	struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+	struct latch_led_data *leds_data;
-+
-+	leds_data = platform_get_drvdata(pdev);
-+
-+	for (i = 0; i < pdata->num_leds; i++) {
-+		led_classdev_unregister(&leds_data[i].cdev);
-+		cancel_work_sync(&leds_data[i].work);
-+	}
-+
-+	kfree(leds_data);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver latch_led_driver = {
-+	.probe		= latch_led_probe,
-+	.remove		= latch_led_remove,
-+	.driver		= {
-+		.name	= "leds-latch",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init latch_led_init(void)
-+{
-+	return platform_driver_register(&latch_led_driver);
-+}
-+
-+static void __exit latch_led_exit(void)
-+{
-+	platform_driver_unregister(&latch_led_driver);
-+}
-+
-+module_init(latch_led_init);
-+module_exit(latch_led_exit);
-+
-+MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
-+MODULE_DESCRIPTION("Latch LED driver");
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -423,4 +423,18 @@ static inline void ledtrig_cpu(enum cpu_
- }
- #endif
- 
-+/* For the leds-latch driver */
-+struct latch_led {
-+	const char *name;
-+	char *default_trigger;
-+	unsigned  bit;
-+};
-+
-+struct latch_led_platform_data {
-+	int     num_leds;
-+	u32     mem;
-+	struct latch_led *leds;
-+	void	(*set_led)(u8 bit, enum led_brightness value);
-+};
-+
- #endif		/* __LINUX_LEDS_H_INCLUDED */
diff --git a/target/linux/ixp4xx/patches-4.9/300-avila_support.patch b/target/linux/ixp4xx/patches-4.9/300-avila_support.patch
deleted file mode 100644
index c801607f4b..0000000000
--- a/target/linux/ixp4xx/patches-4.9/300-avila_support.patch
+++ /dev/null
@@ -1,726 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-pci.c
-+++ b/arch/arm/mach-ixp4xx/avila-pci.c
-@@ -27,8 +27,8 @@
- #include <mach/hardware.h>
- #include <asm/mach-types.h>
- 
--#define AVILA_MAX_DEV	4
--#define LOFT_MAX_DEV	6
-+#define AVILA_MAX_DEV	6
-+
- #define IRQ_LINES	4
- 
- /* PCI controller GPIO to IRQ pin mappings */
-@@ -55,10 +55,8 @@ static int __init avila_map_irq(const st
- 		IXP4XX_GPIO_IRQ(INTD)
- 	};
- 
--	if (slot >= 1 &&
--	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
--	    pin >= 1 && pin <= IRQ_LINES)
--		return pci_irq_table[(slot + pin - 2) % 4];
-+	if (slot >= 1 && slot <= AVILA_MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-+		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
- 
- 	return -1;
- }
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -14,9 +14,16 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/i2c.h>
-+#include <linux/platform_data/at24.h>
-+#include <linux/leds.h>
-+#include <linux/platform_data/pca953x.h>
- #include <linux/i2c-gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -26,10 +33,25 @@
- #include <asm/irq.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-+#include <linux/irq.h>
- 
- #define AVILA_SDA_PIN	7
- #define AVILA_SCL_PIN	6
- 
-+/* User LEDs */
-+#define AVILA_GW23XX_LED_USER_GPIO     3
-+#define AVILA_GW23X7_LED_USER_GPIO     4
-+
-+/* gpio mask used by platform device */
-+#define AVILA_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
-+
-+struct avila_board_info {
-+	unsigned char	*model;
-+	void		(*setup)(void);
-+};
-+
-+static struct avila_board_info *avila_info __initdata;
-+
- static struct flash_platform_data avila_flash_data = {
- 	.map_name	= "cfi_probe",
- 	.width		= 2,
-@@ -105,14 +127,69 @@ static struct platform_device avila_uart
- 	.resource		= avila_uart_resources
- };
- 
--static struct resource avila_pata_resources[] = {
-+static struct resource avila_optional_uart_resources[] = {
- 	{
--		.flags	= IORESOURCE_MEM
--	},
-+		.start  = 0x54000000,
-+		.end  = 0x54000fff,
-+		.flags  = IORESOURCE_MEM
-+	},{
-+		.start  = 0x55000000,
-+		.end  = 0x55000fff,
-+		.flags  = IORESOURCE_MEM
-+	},{
-+		.start  = 0x56000000,
-+		.end  = 0x56000fff,
-+		.flags  = IORESOURCE_MEM
-+	},{
-+		.start  = 0x57000000,
-+		.end  = 0x57000fff,
-+		.flags  = IORESOURCE_MEM
-+	}
-+};
-+
-+static struct plat_serial8250_port avila_optional_uart_data[] = {
- 	{
--		.flags	= IORESOURCE_MEM,
-+		.flags    = UPF_BOOT_AUTOCONF,
-+		.iotype   = UPIO_MEM,
-+		.regshift = 0,
-+		.uartclk  = 18432000,
-+		.rw_delay = 2,
-+	},{
-+		.flags    = UPF_BOOT_AUTOCONF,
-+		.iotype   = UPIO_MEM,
-+		.regshift = 0,
-+		.uartclk  = 18432000,
-+		.rw_delay = 2,
-+	},{
-+		.flags    = UPF_BOOT_AUTOCONF,
-+		.iotype   = UPIO_MEM,
-+		.regshift = 0,
-+		.uartclk  = 18432000,
-+		.rw_delay = 2,
-+	},{
-+		.flags    = UPF_BOOT_AUTOCONF,
-+		.iotype   = UPIO_MEM,
-+		.regshift = 0,
-+		.uartclk  = 18432000,
-+		.rw_delay = 2,
- 	},
-+	{ }
-+};
-+
-+static struct platform_device avila_optional_uart = {
-+  .name   = "serial8250",
-+  .id   = PLAT8250_DEV_PLATFORM1,
-+  .dev.platform_data  = avila_optional_uart_data,
-+  .num_resources  = 4,
-+  .resource = avila_optional_uart_resources,
-+};
-+
-+static struct resource avila_pata_resources[] = {
- 	{
-+		.flags	= IORESOURCE_MEM
-+	},{
-+		.flags	= IORESOURCE_MEM,
-+	},{
- 		.name	= "intrq",
- 		.start	= IRQ_IXP4XX_GPIO12,
- 		.end	= IRQ_IXP4XX_GPIO12,
-@@ -133,21 +210,237 @@ static struct platform_device avila_pata
- 	.resource		= avila_pata_resources,
- };
- 
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info avila_npeb_data = {
-+	.phy		= 0,
-+	.rxq		= 3,
-+	.txreadyq	= 20,
-+};
-+
-+static struct eth_plat_info avila_npec_data = {
-+	.phy		= 1,
-+	.rxq		= 4,
-+	.txreadyq	= 21,
-+};
-+
-+static struct platform_device avila_npeb_device = {
-+	.name			= "ixp4xx_eth",
-+	.id			= IXP4XX_ETH_NPEB,
-+	.dev.platform_data	= &avila_npeb_data,
-+	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device avila_npec_device = {
-+	.name			= "ixp4xx_eth",
-+	.id			= IXP4XX_ETH_NPEC,
-+	.dev.platform_data	= &avila_npec_data,
-+	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+};
-+
-+static struct gpio_led avila_gpio_leds[] = {
-+	{
-+		.name		= "user",  /* green led */
-+		.gpio		= AVILA_GW23XX_LED_USER_GPIO,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "radio1",  /* green led */
-+		.gpio		= 104,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "radio2",  /* green led */
-+		.gpio		= 105,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "radio3",  /* green led */
-+		.gpio		= 106,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "radio4",  /* green led */
-+		.gpio		= 107,
-+		.active_low	= 1,
-+	},
-+
-+};
-+
-+static struct gpio_led_platform_data avila_gpio_leds_data = {
-+	.num_leds		= 1,
-+	.leds			= avila_gpio_leds,
-+};
-+
-+static struct platform_device avila_gpio_leds_device = {
-+	.name			= "leds-gpio",
-+	.id			= -1,
-+	.dev.platform_data	= &avila_gpio_leds_data,
-+};
-+
-+static struct latch_led avila_latch_leds[] = {
-+	{
-+		.name	= "led0",  /* green led */
-+		.bit	= 0,
-+	},
-+	{
-+		.name	= "led1",  /* green led */
-+		.bit	= 1,
-+	},
-+	{
-+		.name	= "led2",  /* green led */
-+		.bit	= 2,
-+	},
-+	{
-+		.name	= "led3",  /* green led */
-+		.bit	= 3,
-+	},
-+	{
-+		.name	= "led4",  /* green led */
-+		.bit	= 4,
-+	},
-+	{
-+		.name	= "led5",  /* green led */
-+		.bit	= 5,
-+	},
-+	{
-+		.name	= "led6",  /* green led */
-+		.bit	= 6,
-+	},
-+	{
-+		.name	= "led7",  /* green led */
-+		.bit	= 7,
-+	}
-+};
-+
-+static struct latch_led_platform_data avila_latch_leds_data = {
-+	.num_leds	= 8,
-+	.leds		= avila_latch_leds,
-+	.mem		= 0x51000000,
-+};
-+
-+static struct platform_device avila_latch_leds_device = {
-+	.name			= "leds-latch",
-+	.id			= -1,
-+	.dev.platform_data	= &avila_latch_leds_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- 	&avila_i2c_gpio,
--	&avila_flash,
- 	&avila_uart
- };
- 
--static void __init avila_init(void)
-+/*
-+ * Audio Devices
-+ */
-+
-+static struct platform_device avila_hss_device[] = {
-+	{
-+		.name = "gw_avila_hss",
-+		.id = 0,
-+	},{
-+		.name = "gw_avila_hss",
-+		.id = 1,
-+	},{
-+		.name = "gw_avila_hss",
-+		.id = 2,
-+	},{
-+		.name = "gw_avila_hss",
-+		.id = 3,
-+	},
-+};
-+
-+static struct platform_device avila_pcm_device[] = {
-+	{
-+		.name = "gw_avila-audio",
-+		.id = 0,
-+	},{
-+		.name = "gw_avila-audio",
-+		.id = 1,
-+	},{
-+		.name = "gw_avila-audio",
-+		.id = 2,
-+	},{
-+		.name = "gw_avila-audio",
-+		.id = 3,
-+	}
-+};
-+
-+static void setup_audio_devices(void) {
-+	platform_device_register(&avila_hss_device[0]);
-+	platform_device_register(&avila_hss_device[1]);
-+	platform_device_register(&avila_hss_device[2]);
-+	platform_device_register(&avila_hss_device[3]);
-+
-+	platform_device_register(&avila_pcm_device[0]);
-+	platform_device_register(&avila_pcm_device[1]);
-+	platform_device_register(&avila_pcm_device[2]);
-+	platform_device_register(&avila_pcm_device[3]);
-+}
-+
-+static void __init avila_gw23xx_setup(void)
- {
--	ixp4xx_sys_init();
-+	platform_device_register(&avila_npeb_device);
-+	platform_device_register(&avila_npec_device);
- 
--	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
--	avila_flash_resource.end =
--		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+	platform_device_register(&avila_gpio_leds_device);
-+}
- 
--	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-+static void __init avila_gw2342_setup(void)
-+{
-+	platform_device_register(&avila_npeb_device);
-+	platform_device_register(&avila_npec_device);
-+
-+	platform_device_register(&avila_gpio_leds_device);
-+
-+	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+	platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2345_setup(void)
-+{
-+	avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+	avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+	platform_device_register(&avila_npeb_device);
-+
-+	avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
-+	platform_device_register(&avila_npec_device);
-+
-+	platform_device_register(&avila_gpio_leds_device);
-+
-+	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+	platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2347_setup(void)
-+{
-+	platform_device_register(&avila_npeb_device);
-+
-+	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+	platform_device_register(&avila_gpio_leds_device);
-+}
-+
-+static void __init avila_gw2348_setup(void)
-+{
-+	platform_device_register(&avila_npeb_device);
-+	platform_device_register(&avila_npec_device);
-+
-+	platform_device_register(&avila_gpio_leds_device);
- 
- 	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
- 	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-@@ -159,8 +452,335 @@ static void __init avila_init(void)
- 	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
- 
- 	platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2353_setup(void)
-+{
-+	platform_device_register(&avila_npeb_device);
-+	platform_device_register(&avila_gpio_leds_device);
-+}
-+
-+static void __init avila_gw2355_setup(void)
-+{
-+	avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+	avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+	platform_device_register(&avila_npeb_device);
-+
-+	avila_npec_data.phy = 16;
-+	platform_device_register(&avila_npec_device);
-+
-+	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+	platform_device_register(&avila_gpio_leds_device);
-+
-+	*IXP4XX_EXP_CS4 |= 0xbfff3c03;
-+	avila_latch_leds[0].name = "RXD";
-+	avila_latch_leds[1].name = "TXD";
-+	avila_latch_leds[2].name = "POL";
-+	avila_latch_leds[3].name = "LNK";
-+	avila_latch_leds[4].name = "ERR";
-+	avila_latch_leds_data.num_leds = 5;
-+	avila_latch_leds_data.mem = 0x54000000;
-+	platform_device_register(&avila_latch_leds_device);
-+
-+	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+	platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2357_setup(void)
-+{
-+	platform_device_register(&avila_npeb_device);
-+
-+	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+	platform_device_register(&avila_gpio_leds_device);
-+
-+	*IXP4XX_EXP_CS1 |= 0xbfff3c03;
-+	platform_device_register(&avila_latch_leds_device);
-+}
-+
-+static void __init avila_gw2365_setup(void)
-+{
-+	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	*IXP4XX_EXP_CS4 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_EDGE_RISING);
-+	avila_optional_uart_data[0].mapbase = 0x54000000;
-+	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x54000000, 0x0fff);
-+	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO0;
-+
-+	*IXP4XX_EXP_CS5 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_EDGE_RISING);
-+	avila_optional_uart_data[1].mapbase = 0x55000000;
-+	avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x55000000, 0x0fff);
-+	avila_optional_uart_data[1].irq   = IRQ_IXP4XX_GPIO1;
-+
-+	*IXP4XX_EXP_CS6 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+	avila_optional_uart_data[2].mapbase = 0x56000000;
-+	avila_optional_uart_data[2].membase = (void __iomem *)ioremap(0x56000000, 0x0fff);
-+	avila_optional_uart_data[2].irq   = IRQ_IXP4XX_GPIO2;
-+
-+	*IXP4XX_EXP_CS7 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+	avila_optional_uart_data[3].mapbase = 0x57000000;
-+	avila_optional_uart_data[3].membase = (void __iomem *)ioremap(0x57000000, 0x0fff);
-+	avila_optional_uart_data[3].irq   = IRQ_IXP4XX_GPIO3;
-+
-+	platform_device_register(&avila_optional_uart);
-+
-+	avila_npeb_data.phy = 1;
-+	platform_device_register(&avila_npeb_device);
-+
-+	avila_npec_data.phy = 2;
-+	platform_device_register(&avila_npec_device);
-+
-+	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
-+	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
-+
-+	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
-+	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
-+
-+	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
-+	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+	platform_device_register(&avila_pata);
-+
-+	avila_gpio_leds[0].gpio = 109;
-+	avila_gpio_leds_data.num_leds = 5;
-+	platform_device_register(&avila_gpio_leds_device);
-+
-+	setup_audio_devices();
-+}
-+
-+static void __init avila_gw2369_setup(void)
-+{
-+	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	avila_npeb_data.phy = 1;
-+	platform_device_register(&avila_npeb_device);
-+
-+	avila_npec_data.phy = 2;
-+	platform_device_register(&avila_npec_device);
-+
-+	setup_audio_devices();
-+}
-+
-+static void __init avila_gw2370_setup(void)
-+{
-+	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	avila_npeb_data.phy = 5;
-+	platform_device_register(&avila_npeb_device);
-+
-+	avila_npec_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+	avila_npec_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+	platform_device_register(&avila_npec_device);
-+
-+	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+	avila_optional_uart_data[0].mapbase = 0x52000000;
-+	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO2;
-+
-+	*IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+	avila_optional_uart_data[1].mapbase = 0x53000000;
-+	avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53000000, 0x0fff);
-+	avila_optional_uart_data[1].irq   = IRQ_IXP4XX_GPIO3;
-+
-+	avila_optional_uart.num_resources = 2;
-+
-+	platform_device_register(&avila_optional_uart);
-+
-+	avila_gpio_leds[0].gpio = 101;
-+	platform_device_register(&avila_gpio_leds_device);
-+
-+	setup_audio_devices();
-+}
-+
-+static void __init avila_gw2375_setup(void)
-+{
-+	avila_npeb_data.phy = 1;
-+	platform_device_register(&avila_npeb_device);
-+
-+	avila_npec_data.phy = 2;
-+	platform_device_register(&avila_npec_device);
-+
-+	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
-+	avila_optional_uart_data[0].mapbase = 0x52000000;
-+	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO10;
-+
-+	avila_optional_uart.num_resources = 1;
-+
-+	platform_device_register(&avila_optional_uart);
-+
-+	setup_audio_devices();
-+}
-+
-+
-+static struct avila_board_info avila_boards[] __initdata = {
-+	{
-+		.model		= "GW2342",
-+		.setup		= avila_gw2342_setup,
-+	}, {
-+		.model		= "GW2345",
-+		.setup		= avila_gw2345_setup,
-+	}, {
-+		.model		= "GW2347",
-+		.setup		= avila_gw2347_setup,
-+	}, {
-+		.model		= "GW2348",
-+		.setup		= avila_gw2348_setup,
-+	}, {
-+		.model		= "GW2353",
-+		.setup		= avila_gw2353_setup,
-+	}, {
-+		.model		= "GW2355",
-+		.setup		= avila_gw2355_setup,
-+	}, {
-+		.model		= "GW2357",
-+		.setup		= avila_gw2357_setup,
-+	}, {
-+		.model		= "GW2365",
-+		.setup		= avila_gw2365_setup,
-+	}, {
-+		.model		= "GW2369",
-+		.setup		= avila_gw2369_setup,
-+	}, {
-+		.model		= "GW2370",
-+		.setup		= avila_gw2370_setup,
-+	}, {
-+		.model		= "GW2373",
-+		.setup		= avila_gw2369_setup,
-+	}, {
-+		.model		= "GW2375",
-+		.setup		= avila_gw2375_setup,
-+	}
-+};
-+
-+static struct avila_board_info * __init avila_find_board_info(char *model)
-+{
-+	int i;
-+	model[6] = '\0';
-+
-+	for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
-+		struct avila_board_info *info = &avila_boards[i];
-+		if (strcmp(info->model, model) == 0)
-+			return info;
-+	}
-+
-+	return NULL;
-+}
-+
-+static struct nvmem_device *at24_nvmem;
-+
-+static void at24_setup(struct nvmem_device *mem_acc, void *context)
-+{
-+	char mac_addr[ETH_ALEN];
-+	char model[7];
-+
-+	at24_nvmem = mem_acc;
-+
-+	/* Read MAC addresses */
-+	if (nvmem_device_read(at24_nvmem, 0x0, 6, mac_addr) == 6) {
-+		memcpy(&avila_npeb_data.hwaddr, mac_addr, ETH_ALEN);
-+	}
-+	if (nvmem_device_read(at24_nvmem, 0x6, 6, mac_addr) == 6) {
-+		memcpy(&avila_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+	}
-+
-+	/* Read the first 6 bytes of the model number */
-+	if (nvmem_device_read(at24_nvmem, 0x20, 6, model) == 6) {
-+		avila_info = avila_find_board_info(model);
-+	}
-+
-+}
-+
-+static struct at24_platform_data avila_eeprom_info = {
-+	.byte_len	= 1024,
-+	.page_size	= 16,
-+//	.flags		= AT24_FLAG_READONLY,
-+	.setup		= at24_setup,
-+};
-+
-+static struct pca953x_platform_data avila_pca_data = {
-+	.gpio_base  = 100,
-+};
-+
-+static struct i2c_board_info __initdata avila_i2c_board_info[] = {
-+	{
-+		I2C_BOARD_INFO("ds1672", 0x68),
-+	},
-+	{
-+		I2C_BOARD_INFO("gsp", 0x29),
-+	},
-+	{
-+		I2C_BOARD_INFO("pca9555", 0x23),
-+		.platform_data = &avila_pca_data,
-+	},
-+	{
-+		I2C_BOARD_INFO("ad7418", 0x28),
-+	},
-+	{
-+		I2C_BOARD_INFO("24c08", 0x51),
-+		.platform_data	= &avila_eeprom_info
-+	},
-+	{
-+		I2C_BOARD_INFO("tlv320aic33", 0x1b),
-+	},
-+	{
-+		I2C_BOARD_INFO("tlv320aic33", 0x1a),
-+	},
-+	{
-+		I2C_BOARD_INFO("tlv320aic33", 0x19),
-+	},
-+	{
-+		I2C_BOARD_INFO("tlv320aic33", 0x18),
-+	},
-+};
-+
-+static void __init avila_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-+
-+	i2c_register_board_info(0, avila_i2c_board_info,
-+			ARRAY_SIZE(avila_i2c_board_info));
-+}
-+
-+static int __init avila_model_setup(void)
-+{
-+	if (!machine_is_avila())
-+		return 0;
-+
-+	/* default 16MB flash */
-+	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+	if (avila_info) {
-+		printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
-+							avila_info->model);
-+		avila_info->setup();
-+	} else {
-+		printk(KERN_INFO "Unknown/missing Avila model number"
-+						" -- defaults will be used\n");
-+		avila_gw23xx_setup();
-+	}
-+	platform_device_register(&avila_flash);
- 
-+	return 0;
- }
-+late_initcall(avila_model_setup);
- 
- MACHINE_START(AVILA, "Gateworks Avila Network Platform")
- 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
diff --git a/target/linux/ixp4xx/patches-4.9/304-ixp4xx_eth_jumboframe.patch b/target/linux/ixp4xx/patches-4.9/304-ixp4xx_eth_jumboframe.patch
deleted file mode 100644
index 108fbcb37a..0000000000
--- a/target/linux/ixp4xx/patches-4.9/304-ixp4xx_eth_jumboframe.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -57,7 +57,7 @@
- 
- #define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
- #define REGS_SIZE		0x1000
--#define MAX_MRU			1536 /* 0x600 */
-+#define MAX_MRU			(14320 - ETH_HLEN - ETH_FCS_LEN)
- #define RX_BUFF_SIZE		ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
- 
- #define NAPI_WEIGHT		16
-@@ -1289,6 +1289,32 @@ static void destroy_queues(struct port *
- 	}
- }
- 
-+static int eth_do_change_mtu(struct net_device *dev, int mtu)
-+{
-+	struct port *port;
-+	struct msg msg;
-+	/* adjust for ethernet headers */
-+	int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
-+
-+	port = netdev_priv(dev);
-+
-+	memset(&msg, 0, sizeof(msg));
-+	msg.cmd = NPE_SETMAXFRAMELENGTHS;
-+	msg.eth_id = port->id;
-+
-+	/* max rx/tx 64 byte blocks */
-+	msg.byte2 = ((framesize + 63) / 64) << 8;
-+	msg.byte3 = ((framesize + 63) / 64) << 8;
-+
-+	msg.byte4 = msg.byte6 = framesize >> 8;
-+	msg.byte5 = msg.byte7 = framesize & 0xff;
-+
-+	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
-+		return -EIO;
-+
-+	return 0;
-+}
-+
- static int eth_open(struct net_device *dev)
- {
- 	struct port *port = netdev_priv(dev);
-@@ -1340,6 +1366,8 @@ static int eth_open(struct net_device *d
- 	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
- 		return -EIO;
- 
-+	eth_do_change_mtu(dev, dev->mtu);
-+
- 	if ((err = request_queues(port)) != 0)
- 		return err;
- 
-@@ -1479,7 +1507,26 @@ static int eth_close(struct net_device *
- 	return 0;
- }
- 
-+static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
-+{
-+	int ret;
-+
-+	if (mtu > MAX_MRU)
-+		return -EINVAL;
-+
-+	if (dev->flags & IFF_UP) {
-+		ret = eth_do_change_mtu(dev, mtu);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	dev->mtu = mtu;
-+
-+	return 0;
-+}
-+
- static const struct net_device_ops ixp4xx_netdev_ops = {
-+	.ndo_change_mtu = ixp_eth_change_mtu,
- 	.ndo_open = eth_open,
- 	.ndo_stop = eth_close,
- 	.ndo_start_xmit = eth_xmit,
diff --git a/target/linux/ixp4xx/patches-4.9/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-4.9/310-gtwx5717_spi_bus.patch
deleted file mode 100644
index 51f3f14510..0000000000
--- a/target/linux/ixp4xx/patches-4.9/310-gtwx5717_spi_bus.patch
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -27,6 +27,8 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -146,9 +148,37 @@ static struct platform_device gtwx5715_f
- 	.resource	= &gtwx5715_flash_resource,
- };
- 
-+static struct spi_gpio_platform_data gtwx5715_spi_platform_data = {
-+        .sck            = GTWX5715_KSSPI_CLOCK,
-+        .mosi           = GTWX5715_KSSPI_TXD,
-+        .miso           = GTWX5715_KSSPI_RXD,
-+        .num_chipselect = 1,
-+};
-+
-+static struct platform_device gtwx5715_spi_device = {
-+        .name   = "spi_gpio",
-+        .id     = 1,
-+        .dev    = {
-+                .platform_data  = &gtwx5715_spi_platform_data,
-+	}
-+};
-+
-+static struct spi_board_info gtwx5715_spi_devices[] __initdata = {
-+        {
-+                .modalias               = "spi-ks8995",
-+                .max_speed_hz           = 5000000,
-+                .mode                   = SPI_MODE_0,
-+                .bus_num                = 1,
-+                .chip_select            = 0,
-+                .controller_data        = (void *)GTWX5715_KSSPI_SELECT,
-+	}
-+};
-+
-+
- static struct platform_device *gtwx5715_devices[] __initdata = {
- 	&gtwx5715_uart_device,
- 	&gtwx5715_flash,
-+	&gtwx5715_spi_device,
- };
- 
- static void __init gtwx5715_init(void)
-@@ -158,6 +188,7 @@ static void __init gtwx5715_init(void)
- 	gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- 	gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
- 
-+	spi_register_board_info(gtwx5715_spi_devices, ARRAY_SIZE(gtwx5715_spi_devices));
- 	platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
- }
- 
diff --git a/target/linux/ixp4xx/patches-4.9/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/311-gtwx5717_mac_plat_info.patch
deleted file mode 100644
index 85a8f162c6..0000000000
--- a/target/linux/ixp4xx/patches-4.9/311-gtwx5717_mac_plat_info.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -29,6 +29,7 @@
- #include <linux/serial_8250.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
-+#include <linux/dma-mapping.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -174,11 +175,39 @@ static struct spi_board_info gtwx5715_sp
- 	}
- };
- 
-+static struct eth_plat_info gtwx5715_npeb_data = {
-+	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
-+	.rxq		= 3,
-+	.txreadyq	= 20,
-+};
-+
-+static struct eth_plat_info gtwx5715_npec_data = {
-+	.phy		= 5,	/* port 5 of the KS8995 switch */
-+	.rxq		= 4,
-+	.txreadyq	= 21,
-+};
-+
-+static struct platform_device gtwx5715_npeb_device = {
-+	.name			= "ixp4xx_eth",
-+	.id			= IXP4XX_ETH_NPEB,
-+	.dev.platform_data	= &gtwx5715_npeb_data,
-+	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device gtwx5715_npec_device = {
-+	.name			= "ixp4xx_eth",
-+	.id			= IXP4XX_ETH_NPEC,
-+	.dev.platform_data	= &gtwx5715_npec_data,
-+	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+};
- 
- static struct platform_device *gtwx5715_devices[] __initdata = {
- 	&gtwx5715_uart_device,
- 	&gtwx5715_flash,
- 	&gtwx5715_spi_device,
-+	&gtwx5715_npeb_device,
-+	&gtwx5715_npec_device,
- };
- 
- static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-4.9/312-ixp4xx_pata_optimization.patch b/target/linux/ixp4xx/patches-4.9/312-ixp4xx_pata_optimization.patch
deleted file mode 100644
index 59c2837f0c..0000000000
--- a/target/linux/ixp4xx/patches-4.9/312-ixp4xx_pata_optimization.patch
+++ /dev/null
@@ -1,137 +0,0 @@
---- a/drivers/ata/pata_ixp4xx_cf.c
-+++ b/drivers/ata/pata_ixp4xx_cf.c
-@@ -24,16 +24,58 @@
- #include <scsi/scsi_host.h>
- 
- #define DRV_NAME	"pata_ixp4xx_cf"
--#define DRV_VERSION	"0.2"
-+#define DRV_VERSION	"0.3"
- 
- static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
- {
-+	struct ixp4xx_pata_data *data = link->ap->host->dev->platform_data;
-+	unsigned int pio_mask;
- 	struct ata_device *dev;
- 
- 	ata_for_each_dev(dev, link, ENABLED) {
--		ata_dev_info(dev, "configured for PIO0\n");
--		dev->pio_mode = XFER_PIO_0;
--		dev->xfer_mode = XFER_PIO_0;
-+		if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
-+			pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+			if (pio_mask & (1 << 1)) {
-+				pio_mask = 4;
-+			} else {
-+				pio_mask = 3;
-+			}
-+		} else {
-+			pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+		}
-+
-+		switch (pio_mask){
-+			case 0:
-+				ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-+				dev->pio_mode = XFER_PIO_0;
-+				dev->xfer_mode = XFER_PIO_0;
-+				*data->cs0_cfg = 0x8a473c03;
-+				break;
-+			case 1:
-+				ata_dev_printk(dev, KERN_INFO, "configured for PIO1\n");
-+				dev->pio_mode = XFER_PIO_1;
-+				dev->xfer_mode = XFER_PIO_1;
-+				*data->cs0_cfg = 0x86433c03;
-+				break;
-+			case 2:
-+				ata_dev_printk(dev, KERN_INFO, "configured for PIO2\n");
-+				dev->pio_mode = XFER_PIO_2;
-+				dev->xfer_mode = XFER_PIO_2;
-+				*data->cs0_cfg = 0x82413c03;
-+				break;
-+			case 3:
-+				ata_dev_printk(dev, KERN_INFO, "configured for PIO3\n");
-+				dev->pio_mode = XFER_PIO_3;
-+				dev->xfer_mode = XFER_PIO_3;
-+				*data->cs0_cfg = 0x80823c03;
-+				break;
-+			case 4:
-+				ata_dev_printk(dev, KERN_INFO, "configured for PIO4\n");
-+				dev->pio_mode = XFER_PIO_4;
-+				dev->xfer_mode = XFER_PIO_4;
-+				*data->cs0_cfg = 0x80403c03;
-+				break;
-+		}
- 		dev->xfer_shift = ATA_SHIFT_PIO;
- 		dev->flags |= ATA_DFLAG_PIO;
- 	}
-@@ -46,6 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfe
- 	unsigned int i;
- 	unsigned int words = buflen >> 1;
- 	u16 *buf16 = (u16 *) buf;
-+	unsigned int pio_mask;
- 	struct ata_port *ap = dev->link->ap;
- 	void __iomem *mmio = ap->ioaddr.data_addr;
- 	struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
-@@ -53,8 +96,34 @@ static unsigned int ixp4xx_mmio_data_xfe
- 	/* set the expansion bus in 16bit mode and restore
- 	 * 8 bit mode after the transaction.
- 	 */
--	*data->cs0_cfg &= ~(0x01);
--	udelay(100);
-+	if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)){
-+		pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+		if (pio_mask & (1 << 1)){
-+			pio_mask = 4;
-+		}else{
-+			pio_mask = 3;
-+		}
-+	}else{
-+		pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+	}
-+	switch (pio_mask){
-+		case 0:
-+			*data->cs0_cfg = 0xa9643c42;
-+		break;
-+		case 1:
-+			*data->cs0_cfg = 0x85033c42;
-+		break;
-+		case 2:
-+			*data->cs0_cfg = 0x80b23c42;
-+		break;
-+		case 3:
-+			*data->cs0_cfg = 0x80823c42;
-+		break;
-+		case 4:
-+			*data->cs0_cfg = 0x80403c42;
-+		break;
-+	}
-+	udelay(5);
- 
- 	/* Transfer multiple of 2 bytes */
- 	if (rw == READ)
-@@ -79,8 +148,24 @@ static unsigned int ixp4xx_mmio_data_xfe
- 		words++;
- 	}
- 
--	udelay(100);
--	*data->cs0_cfg |= 0x01;
-+	udelay(5);
-+	switch (pio_mask){
-+		case 0:
-+			*data->cs0_cfg = 0x8a473c03;
-+		break;
-+		case 1:
-+			*data->cs0_cfg = 0x86433c03;
-+		break;
-+		case 2:
-+			*data->cs0_cfg = 0x82413c03;
-+		break;
-+		case 3:
-+			*data->cs0_cfg = 0x80823c03;
-+		break;
-+		case 4:
-+			*data->cs0_cfg = 0x80403c03;
-+		break;
-+	}
- 
- 	return words << 1;
- }
diff --git a/target/linux/ixp4xx/patches-4.9/500-usr8200_support.patch b/target/linux/ixp4xx/patches-4.9/500-usr8200_support.patch
deleted file mode 100644
index fb7f03ee1a..0000000000
--- a/target/linux/ixp4xx/patches-4.9/500-usr8200_support.patch
+++ /dev/null
@@ -1,347 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -93,6 +93,14 @@ config MACH_SIDEWINDER
- 	  Engineering Sidewinder board. For more information on this
- 	  platform, see http://www.adiengineering.com
- 
-+config MACH_USR8200
-+	bool "USRobotics USR8200"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support the USRobotics
-+	  USR8200 router board. For more information on this platform, see
-+	  http://openwrt.org
-+
- config MACH_COMPEXWP18
- 	bool "Compex WP18 / NP18A"
- 	select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -27,6 +27,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt
- obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
-+obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
- 
- obj-y	+= common.o
- 
-@@ -55,6 +56,7 @@ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv
- obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
-+obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -44,7 +44,8 @@ static __inline__ void __arch_decomp_set
- 	    machine_is_gateway7001() || machine_is_wg302v2() ||
- 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
--	    machine_is_wrt300nv2() || machine_is_tw5334())
-+	    machine_is_wrt300nv2() || machine_is_tw5334() ||
-+	    machine_is_usr8200())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
-@@ -0,0 +1,77 @@
-+/*
-+ * arch/arch/mach-ixp4xx/usr8200-pci.c
-+ *
-+ * PCI setup routines for USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
-+ *
-+ * based on pronghorn-pci.c
-+ * 	Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Peter Denison <openwrt@marshadder.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init usr8200_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init usr8200_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 14)
-+		return IRQ_IXP4XX_GPIO7;
-+	else if (slot == 15)
-+		return IRQ_IXP4XX_GPIO8;
-+	else if (slot == 16) {
-+		if (pin == 1)
-+			return IRQ_IXP4XX_GPIO11;
-+		else if (pin == 2)
-+			return IRQ_IXP4XX_GPIO10;
-+		else if (pin == 3)
-+			return IRQ_IXP4XX_GPIO9;
-+		else
-+			return -1;
-+	} else
-+		return -1;
-+}
-+
-+struct hw_pci usr8200_pci __initdata = {
-+	.nr_controllers	= 1,
-+	.preinit	= usr8200_pci_preinit,
-+	.ops		= &ixp4xx_ops,
-+	.setup		= ixp4xx_setup,
-+	.map_irq	= usr8200_map_irq,
-+};
-+
-+int __init usr8200_pci_init(void)
-+{
-+	if (machine_is_usr8200())
-+		pci_common_init(&usr8200_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(usr8200_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -0,0 +1,217 @@
-+/*
-+ * arch/arm/mach-ixp4xx/usr8200-setup.c
-+ *
-+ * Board setup for the USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
-+ *
-+ * based on pronghorn-setup.c:
-+ * 	Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Peter Denison <openwrt@marshadder.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data usr8200_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource usr8200_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device usr8200_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &usr8200_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &usr8200_flash_resource,
-+};
-+
-+static struct resource usr8200_uart_resources [] = {
-+	{
-+		.start		= IXP4XX_UART2_BASE_PHYS,
-+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	},
-+	{
-+		.start		= IXP4XX_UART1_BASE_PHYS,
-+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	}
-+};
-+
-+static struct plat_serial8250_port usr8200_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device usr8200_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev		= {
-+		.platform_data	= usr8200_uart_data,
-+	},
-+	.num_resources	= 2,
-+	.resource	= usr8200_uart_resources,
-+};
-+
-+static struct gpio_led usr8200_led_pin[] = {
-+	{
-+		.name		= "usr8200:usb1",
-+		.gpio		= 0,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "usr8200:usb2",
-+		.gpio		= 1,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "usr8200:ieee1394",
-+		.gpio		= 2,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "usr8200:internal",
-+		.gpio		= 3,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "usr8200:power",
-+		.gpio		= 14,
-+	}
-+};
-+
-+static struct gpio_led_platform_data usr8200_led_data = {
-+	.num_leds		= ARRAY_SIZE(usr8200_led_pin),
-+	.leds			= usr8200_led_pin,
-+};
-+
-+static struct platform_device usr8200_led = {
-+	.name			= "leds-gpio",
-+	.id			= -1,
-+	.dev.platform_data	= &usr8200_led_data,
-+};
-+
-+static struct eth_plat_info usr8200_plat_eth[] = {
-+	{ /* NPEC - LAN with Marvell 88E6060 switch */
-+		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+		.phy_mask	= 0x0F0000,
-+		.rxq		= 4,
-+		.txreadyq	= 21,
-+	}, { /* NPEB - WAN */
-+		.phy		= 9,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}
-+};
-+
-+static struct platform_device usr8200_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= usr8200_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= usr8200_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct resource usr8200_rtc_resources = {
-+	.flags		= IORESOURCE_MEM
-+};
-+
-+static struct platform_device usr8200_rtc = {
-+	.name		= "rtc7301",
-+	.id		= 0,
-+	.num_resources	= 1,
-+	.resource	= &usr8200_rtc_resources,
-+};
-+
-+static struct platform_device *usr8200_devices[] __initdata = {
-+	&usr8200_flash,
-+	&usr8200_uart,
-+	&usr8200_led,
-+	&usr8200_eth[0],
-+	&usr8200_eth[1],
-+	&usr8200_rtc,
-+};
-+
-+static void __init usr8200_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+	usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
-+	usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
-+	                  IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
-+	*IXP4XX_GPIO_GPCLKR = 0x01100000;
-+
-+	/* configure button as input */
-+	gpio_line_config(12, IXP4XX_GPIO_IN);
-+
-+	platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
-+}
-+
-+MACHINE_START(USR8200, "USRobotics USR8200")
-+	/* Maintainer: Peter Denison <openwrt@marshadder.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= usr8200_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.9/520-tw2662_support.patch b/target/linux/ixp4xx/patches-4.9/520-tw2662_support.patch
deleted file mode 100644
index 39a261b8e0..0000000000
--- a/target/linux/ixp4xx/patches-4.9/520-tw2662_support.patch
+++ /dev/null
@@ -1,316 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -176,6 +176,15 @@ config ARCH_PRPMC1100
- 	  PrPCM1100 Processor Mezanine Module. For more information on
- 	  this platform, see <file:Documentation/arm/IXP4xx>.
- 
-+config MACH_TW2662
-+        bool "Titan Wireless TW-266-2"
-+        select PCI
-+        help
-+          Say 'Y' here if you want your kernel to support the Titan
-+          Wireless TW266-2. For more information on this platform,
-+          see http://openwrt.org
-+
-+
- config MACH_TW5334
- 	bool "Titan Wireless TW-533-4"
- 	select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
- obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW2662)		+= tw2662-pci.o
- obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
- obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
-@@ -54,6 +55,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
- obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
-+obj-$(CONFIG_MACH_TW2662)	+= tw2662-setup.o
- obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
- obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -45,7 +45,7 @@ static __inline__ void __arch_decomp_set
- 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
- 	    machine_is_wrt300nv2() || machine_is_tw5334() ||
--	    machine_is_usr8200())
-+	    machine_is_usr8200() || machine_is_tw2662())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-pci.c
-+ *
-+ * PCI setup routines for Tiran Wireless TW-266-2 platform
-+ *
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
-+ * Maintainer: Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach/pci.h>
-+
-+#define SLOT0_DEVID	1
-+#define SLOT1_DEVID	3
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define SLOT0_INTA	11
-+#define SLOT1_INTA	9
-+
-+void __init tw2662_pci_preinit(void)
-+{
-+	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw2662_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == SLOT0_DEVID)
-+		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
-+	else if (slot == SLOT1_DEVID)
-+		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
-+	else return -1;
-+}
-+
-+struct hw_pci tw2662_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit =        tw2662_pci_preinit,
-+	.ops =            &ixp4xx_ops,
-+	.setup =          ixp4xx_setup,
-+	.map_irq =        tw2662_map_irq,
-+};
-+
-+int __init tw2662_pci_init(void)
-+{
-+        if (machine_is_tw2662())
-+		pci_common_init(&tw2662_pci);
-+        return 0;
-+}
-+
-+subsys_initcall(tw2662_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -0,0 +1,196 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-setup.c
-+ *
-+ * Titan Wireless TW-266-2
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * based on ap1000-setup.c:
-+ * 	Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/* gpio mask used by platform device */
-+#define TW2662_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
-+
-+static struct flash_platform_data tw2662_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource tw2662_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw2662_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &tw2662_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &tw2662_flash_resource,
-+};
-+
-+static struct resource tw2662_uart_resources[] = {
-+	{
-+		.start		= IXP4XX_UART1_BASE_PHYS,
-+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	},
-+	{
-+		.start		= IXP4XX_UART2_BASE_PHYS,
-+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+		.flags		= IORESOURCE_MEM
-+	}
-+};
-+
-+static struct plat_serial8250_port tw2662_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART1,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device tw2662_uart = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev.platform_data	= tw2662_uart_data,
-+	.num_resources		= 2,
-+	.resource		= tw2662_uart_resources
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw2662_plat_eth[] = {
-+        {
-+                .phy            = 3,
-+                .rxq            = 3,
-+                .txreadyq       = 20,
-+        }, {
-+                .phy            = 1,
-+                .rxq            = 4,
-+                .txreadyq       = 21,
-+        }
-+};
-+
-+static struct platform_device tw2662_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= tw2662_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= tw2662_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+
-+static struct platform_device *tw2662_devices[] __initdata = {
-+	&tw2662_flash,
-+	&tw2662_uart,
-+	&tw2662_eth[0],
-+	&tw2662_eth[1],
-+};
-+
-+static char tw2662_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init tw2662_fixup(struct tag *tags, char **cmdline)
-+{
-+	struct tag *t = tags;
-+	char *p = *cmdline;
-+
-+	/* Find the end of the tags table, taking note of any cmdline tag. */
-+	for (; t->hdr.size; t = tag_next(t)) {
-+		if (t->hdr.tag == ATAG_CMDLINE) {
-+			p = t->u.cmdline.cmdline;
-+		}
-+	}
-+
-+	/* Overwrite the end of the table with a new cmdline tag. */
-+	t->hdr.tag = ATAG_CMDLINE;
-+	t->hdr.size = (sizeof (struct tag_header) +
-+		strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+	strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
-+	strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
-+		COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
-+
-+	/* Terminate the table. */
-+	t = tag_next(t);
-+	t->hdr.tag = ATAG_NONE;
-+	t->hdr.size = 0;
-+}
-+
-+static void __init tw2662_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	tw2662_flash_resource.end =
-+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+	platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
-+
-+	if (!(is_valid_ether_addr(tw2662_plat_eth[0].hwaddr)))
-+		random_ether_addr(tw2662_plat_eth[0].hwaddr);
-+	if (!(is_valid_ether_addr(tw2662_plat_eth[1].hwaddr))) {
-+		memcpy(tw2662_plat_eth[1].hwaddr, tw2662_plat_eth[0].hwaddr, ETH_ALEN);
-+		tw2662_plat_eth[1].hwaddr[5] = (tw2662_plat_eth[0].hwaddr[5] + 1);
-+	}
-+
-+}
-+
-+#ifdef CONFIG_MACH_TW2662
-+MACHINE_START(TW2662, "Titan Wireless TW-266-2")
-+	/* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
-+	.fixup		= tw2662_fixup,
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x0100,
-+	.init_machine	= tw2662_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-4.9/530-ap42x_support.patch b/target/linux/ixp4xx/patches-4.9/530-ap42x_support.patch
deleted file mode 100644
index 1afbe3d61e..0000000000
--- a/target/linux/ixp4xx/patches-4.9/530-ap42x_support.patch
+++ /dev/null
@@ -1,282 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -4,6 +4,14 @@ menu "Intel IXP4xx Implementation Option
- 
- comment "IXP4xx Platforms"
- 
-+config MACH_AP42X
-+	bool "Tonze AP-422/425"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support Tonze's
-+	  AP-422/425 boards. For more information on this platform,
-+	  see http://tonze.com.tw
-+
- config MACH_NSLU2
- 	bool
- 	prompt "Linksys NSLU2"
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -5,6 +5,7 @@
- obj-pci-y	:=
- obj-pci-n	:=
- 
-+obj-pci-$(CONFIG_MACH_AP42X)		+= ap42x-pci.o
- obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
- obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
-@@ -32,6 +33,7 @@ obj-pci-$(CONFIG_MACH_USR8200)		+= usr82
- 
- obj-y	+= common.o
- 
-+obj-$(CONFIG_MACH_AP42X)	+= ap42x-setup.o
- obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
- obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap42x-pci.c
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/arch/mach-ixp4xx/ap42x-pci.c
-+ *
-+ * PCI setup routines for Tonze AP-422/425
-+ *
-+ * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init ap42x_pci_preinit(void)
-+{
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init ap42x_map_irq(const struct pci_dev *dev, u8 slot,
-+	u8 pin)
-+{
-+	if (slot == 1)
-+		return IRQ_IXP4XX_GPIO11;
-+	else if (slot == 2)
-+		return IRQ_IXP4XX_GPIO10;
-+	else return -1;
-+}
-+
-+struct hw_pci ap42x_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit	= ap42x_pci_preinit,
-+	.ops		= &ixp4xx_ops,
-+	.setup		= ixp4xx_setup,
-+	.map_irq	= ap42x_map_irq,
-+};
-+
-+int __init ap42x_pci_init(void)
-+{
-+	if (machine_is_ap42x())
-+		pci_common_init(&ap42x_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(ap42x_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap42x-setup.c
-@@ -0,0 +1,166 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap42x-setup.c
-+ *
-+ * Board setup for the Tonze AP-42x boards
-+ *
-+ * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct mtd_partition ap42x_flash_partitions[] = {
-+	{
-+		.name		= "RedBoot",
-+		.offset		= 0x00000000,
-+		.size		= 0x00080000,
-+	}, {
-+		.name		= "linux",
-+		.offset		= 0x00080000,
-+		.size		= 0x00100000,
-+	}, {
-+		.name		= "rootfs",
-+		.offset		= 0x00180000,
-+		.size		= 0x00660000,
-+	}, {
-+		.name		= "FIS directory",
-+		.offset		= 0x007f8000,
-+		.size		= 0x00007000,
-+	}, {
-+		.name		= "RedBoot config",
-+		.offset		= 0x007ff000,
-+		.size		= 0x00001000,
-+	},
-+};
-+
-+static struct physmap_flash_data ap42x_flash_data = {
-+	.width		= 2,
-+	.parts		= ap42x_flash_partitions,
-+	.nr_parts	= ARRAY_SIZE(ap42x_flash_partitions),
-+};
-+
-+static struct resource ap42x_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= IXP4XX_EXP_BUS_BASE_PHYS,
-+	.end		= IXP4XX_EXP_BUS_BASE_PHYS + SZ_8M - 1,
-+};
-+
-+static struct platform_device ap42x_flash = {
-+	.name			= "physmap-flash",
-+	.id			= 0,
-+	.dev		= {
-+		.platform_data	= &ap42x_flash_data,
-+	},
-+	.num_resources		= 1,
-+	.resource		= &ap42x_flash_resource,
-+};
-+
-+static struct resource ap42x_uart_resource = {
-+	.start	= IXP4XX_UART2_BASE_PHYS,
-+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port ap42x_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device ap42x_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev			= {
-+		.platform_data	= ap42x_uart_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &ap42x_uart_resource,
-+};
-+
-+static struct eth_plat_info ap42x_plat_eth[] = {
-+	{
-+		.phy		= 2,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}, {
-+		.phy		= 1,
-+		.rxq		= 4,
-+		.txreadyq	= 21,
-+	}
-+};
-+
-+static struct platform_device ap42x_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= ap42x_plat_eth,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}, {
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEC,
-+		.dev.platform_data	= ap42x_plat_eth + 1,
-+		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	}
-+};
-+
-+static struct platform_device *ap42x_devices[] __initdata = {
-+	&ap42x_flash,
-+	&ap42x_uart,
-+	&ap42x_eth[0],
-+	&ap42x_eth[1],
-+};
-+
-+static void __init ap42x_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	ap42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	ap42x_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+	platform_add_devices(ap42x_devices, ARRAY_SIZE(ap42x_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP42X
-+MACHINE_START(AP42X, "Tonze AP-422/425")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.init_time	= ixp4xx_timer_init,
-+	.atag_offset	= 0x100,
-+	.init_machine	= ap42x_init,
-+#if defined(CONFIG_PCI)
-+	.dma_zone_size	= SZ_64M,
-+#endif
-+	.restart	= ixp4xx_restart,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -45,7 +45,8 @@ static __inline__ void __arch_decomp_set
- 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
- 	    machine_is_wrt300nv2() || machine_is_tw5334() ||
--	    machine_is_usr8200() || machine_is_tw2662())
-+	    machine_is_usr8200() || machine_is_tw2662() ||
-+	    machine_is_ap42x())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-4.9/600-skb_avoid_dmabounce.patch b/target/linux/ixp4xx/patches-4.9/600-skb_avoid_dmabounce.patch
deleted file mode 100644
index cdd9fde8f0..0000000000
--- a/target/linux/ixp4xx/patches-4.9/600-skb_avoid_dmabounce.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -215,6 +215,9 @@ struct sk_buff *__alloc_skb(unsigned int
- 
- 	if (sk_memalloc_socks() && (flags & SKB_ALLOC_RX))
- 		gfp_mask |= __GFP_MEMALLOC;
-+#ifdef CONFIG_ARCH_IXP4XX
-+	gfp_mask |= GFP_DMA;
-+#endif
- 
- 	/* Get the HEAD */
- 	skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node);
-@@ -1228,6 +1231,10 @@ int pskb_expand_head(struct sk_buff *skb
- 	if (skb_shared(skb))
- 		BUG();
- 
-+#ifdef CONFIG_ARCH_IXP4XX
-+	gfp_mask |= GFP_DMA;
-+#endif
-+
- 	size = SKB_DATA_ALIGN(size);
- 
- 	if (skb_pfmemalloc(skb))
diff --git a/target/linux/ixp4xx/patches-4.9/900-ixp4xx-crypto-include-module.h.patch b/target/linux/ixp4xx/patches-4.9/900-ixp4xx-crypto-include-module.h.patch
deleted file mode 100644
index 24c93dc741..0000000000
--- a/target/linux/ixp4xx/patches-4.9/900-ixp4xx-crypto-include-module.h.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/crypto/ixp4xx_crypto.c
-+++ b/drivers/crypto/ixp4xx_crypto.c
-@@ -14,6 +14,7 @@
- #include <linux/dmapool.h>
- #include <linux/crypto.h>
- #include <linux/kernel.h>
-+#include <linux/module.h>
- #include <linux/rtnetlink.h>
- #include <linux/interrupt.h>
- #include <linux/spinlock.h>
diff --git a/target/linux/ixp4xx/patches-4.9/910-ixp4xx-nr_irq_lines.patch b/target/linux/ixp4xx/patches-4.9/910-ixp4xx-nr_irq_lines.patch
deleted file mode 100644
index 06e09f469d..0000000000
--- a/target/linux/ixp4xx/patches-4.9/910-ixp4xx-nr_irq_lines.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -53,7 +53,7 @@ static int __init ixdp425_map_irq(const
- 	};
- 
- 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
--		return pci_irq_table[(slot + pin - 2) % 4];
-+		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
- 
- 	return -1;
- }
---- a/arch/arm/mach-ixp4xx/miccpt-pci.c
-+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
-@@ -54,7 +54,7 @@ static int __init miccpt_map_irq(const s
- 	};
- 
- 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
--		return pci_irq_table[(slot + pin - 2) % 4];
-+		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
- 
- 	return -1;
- }
diff --git a/target/linux/kirkwood/Makefile b/target/linux/kirkwood/Makefile
index adc7a496e1..3eac246a42 100644
--- a/target/linux/kirkwood/Makefile
+++ b/target/linux/kirkwood/Makefile
@@ -14,7 +14,6 @@ CPU_TYPE:=xscale
 MAINTAINER:=Luka Perkov <luka@openwrt.org>
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
deleted file mode 100644
index d1a5aa7d3e..0000000000
--- a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -6,7 +6,7 @@
- 
- / {
- 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
--	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+	compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
- 	memory {
- 		device_type = "memory";
-@@ -118,13 +118,13 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x600000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@700000 {
--		label = "root";
--		reg = <0x0700000 0xf900000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0xfe00000>;
- 	};
- 
- };
diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
deleted file mode 100644
index ab47b5a724..0000000000
--- a/target/linux/kirkwood/patches-4.19/101-iconnect.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -16,8 +16,6 @@
- 	chosen {
- 		bootargs = "console=ttyS0,115200n8 earlyprintk";
- 		stdout-path = &uart0;
--		linux,initrd-start = <0x4500040>;
--		linux,initrd-end   = <0x4800000>;
- 	};
- 
- 	ocp@f1000000 {
-@@ -146,28 +144,23 @@
- 	status = "okay";
- 
- 	partition@0 {
--		label = "uboot";
--		reg = <0x0000000 0xc0000>;
-+		label = "u-boot";
-+		reg = <0x0000000 0xe0000>;
- 	};
- 
--	partition@a0000 {
--		label = "env";
--		reg = <0xa0000 0x20000>;
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "zImage";
--		reg = <0x100000 0x300000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@540000 {
--		label = "initrd";
--		reg = <0x540000 0x300000>;
--	};
--
--	partition@980000 {
--		label = "boot";
--		reg = <0x980000 0x1f400000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0x1fe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.19/102-dockstar.patch b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
deleted file mode 100644
index 7462b93e0c..0000000000
--- a/target/linux/kirkwood/patches-4.19/102-dockstar.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -78,18 +78,22 @@
- 
- 	partition@0 {
- 		label = "u-boot";
--		reg = <0x0000000 0x100000>;
--		read-only;
-+		reg = <0x0000000 0xe0000>;
-+	};
-+
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@500000 {
--		label = "data";
--		reg = <0x0500000 0xfb00000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0xfe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
deleted file mode 100644
index 9036ead951..0000000000
--- a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -186,18 +186,18 @@
- 	};
- 
- 	partition@a0000 {
--		label = "env";
-+		label = "u-boot environment";
- 		reg = <0xa0000 0x20000>;
- 		read-only;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
-+		label = "kernel";
- 		reg = <0x100000 0x300000>;
- 	};
- 
- 	partition@400000 {
--		label = "rootfs";
-+		label = "ubi";
- 		reg = <0x400000 0x1C00000>;
- 	};
- };
-@@ -211,7 +211,7 @@
- };
- 
- &eth0 {
--	status = "okay";
-+	status = "disabled";
- 	ethernet0-port@0 {
- 		speed = <1000>;
- 		duplex = <1>;
diff --git a/target/linux/kirkwood/patches-4.19/104-ea3500.patch b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
deleted file mode 100644
index 45dc670ebc..0000000000
--- a/target/linux/kirkwood/patches-4.19/104-ea3500.patch
+++ /dev/null
@@ -1,259 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -269,6 +269,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-linkstation-lswsxl.dtb \
- 	kirkwood-linkstation-lswvl.dtb \
- 	kirkwood-linkstation-lswxl.dtb \
-+	kirkwood-linksys-audi.dtb \
- 	kirkwood-linksys-viper.dtb \
- 	kirkwood-lschlv2.dtb \
- 	kirkwood-lsxhl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,246 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Linksys Audi (EA3500)";
-+	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x4000000>;
-+	};
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+		pinctrl-names = "default";
-+
-+		wps {
-+			label = "WPS Button";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		reset {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_green_power >;
-+		pinctrl-names = "default";
-+
-+		green-power {
-+			label = "audi:green:power";
-+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	switches {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		mvsw61xx@10 {
-+			compatible = "marvell,88e6171";
-+			status = "okay";
-+			reg = <0x10>;
-+
-+			mii-bus = <&mdio>;
-+			cpu-port-0 = <5>;
-+			cpu-port-1 = <6>;
-+			is-indirect;
-+		};
-+	};
-+
-+	dsa {
-+		compatible = "marvell,dsa";
-+		#address-cells = <2>;
-+		#size-cells = <0>;
-+
-+		dsa,ethernet = <&eth0port>;
-+		dsa,mii-bus = <&mdio>;
-+
-+		switch@16,0 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
-+
-+			port@0 {
-+				reg = <0>;
-+				label = "ethernet1";
-+			};
-+
-+			port@1 {
-+				reg = <1>;
-+				label = "ethernet2";
-+			};
-+
-+			port@2 {
-+				reg = <2>;
-+				label = "ethernet3";
-+			};
-+
-+			port@3 {
-+				reg = <3>;
-+				label = "ethernet4";
-+			};
-+
-+			port@4 {
-+				reg = <4>;
-+				label = "internet";
-+			};
-+
-+			port@5 {
-+				reg = <5>;
-+				label = "cpu";
-+			};
-+		};
-+	};
-+};
-+
-+&pinctrl {
-+	pmx_led_green_power: pmx-led-green-power {
-+		marvell,pins = "mpp7";
-+		marvell,function = "gpo";
-+	};
-+	pmx_btn_wps: pmx-btn-wps {
-+		marvell,pins = "mpp47";
-+		marvell,function = "gpio";
-+	};
-+	pmx_btn_reset: pmx-btn-reset {
-+		marvell,pins = "mpp48";
-+		marvell,function = "gpio";
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	pinctrl-0 = <&pmx_nand>;
-+	pinctrl-names = "default";
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "u-boot";
-+			reg = <0x0 0x80000>;
-+			read-only;
-+		};
-+
-+		partition@80000 {
-+			label = "u_env";
-+			reg = <0x80000 0x4000>;
-+		};
-+
-+		partition@84000 {
-+			label = "s_env";
-+			reg = <0x84000 0x4000>;
-+		};
-+
-+		partition@200000 {
-+			label = "kernel1";
-+			reg = <0x200000 0x290000>;
-+		};
-+
-+		partition@490000 {
-+			label = "rootfs1";
-+			reg = <0x490000 0x1170000>;
-+		};
-+
-+		partition@1600000 {
-+			label = "kernel2";
-+			reg = <0x1600000 0x290000>;
-+		};
-+
-+		partition@1890000 {
-+			label = "rootfs2";
-+			reg = <0x1890000 0x1170000>;
-+		};
-+
-+		partition@2a00000 {
-+			label = "syscfg";
-+			reg = <0x2a00000  0x1600000>;
-+		};
-+
-+		partition@88000 {
-+			label = "unused";
-+			reg = <0x88000 0x178000>;
-+		};
-+
-+	};
-+};
-+
-+&pciec {
-+	status = "okay";
-+};
-+
-+&pcie0 {
-+	status = "okay";
-+};
-+
-+&pcie1 {
-+	status = "okay";
-+};
-+
-+&mdio {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
-+ * fixed speed and duplex.
-+ */
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+/* eth1 is connected to the switch at port 6. However DSA only supports a
-+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
-+ */
-+&eth1 {
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+/* There is no battery on the board, so the RTC does not keep
-+ * time when there is no power, making it useless.
-+ */
-+&rtc {
-+	status = "disabled";
-+};
diff --git a/target/linux/kirkwood/patches-4.19/105-ea4500.patch b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
deleted file mode 100644
index c7c8b38f95..0000000000
--- a/target/linux/kirkwood/patches-4.19/105-ea4500.patch
+++ /dev/null
@@ -1,126 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -67,9 +67,23 @@
- 		};
- 	};
- 
--	dsa {
--		status = "disabled";
-+	switches {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
- 
-+		mvsw61xx@10 {
-+			compatible = "marvell,88e6171";
-+			status = "okay";
-+			reg = <0x10>;
-+
-+			mii-bus = <&mdio>;
-+			cpu-port-0 = <5>;
-+			cpu-port-1 = <6>;
-+			is-indirect;
-+		};
-+	};
-+
-+	dsa {
- 		compatible = "marvell,dsa";
- 		#address-cells = <2>;
- 		#size-cells = <0>;
-@@ -161,22 +175,22 @@
- 		};
- 
- 		partition@200000 {
--			label = "kernel";
-+			label = "kernel1";
- 			reg = <0x200000 0x2A0000>;
- 		};
- 
- 		partition@4a0000 {
--			label = "rootfs";
-+			label = "rootfs1";
- 			reg = <0x4A0000 0x1760000>;
- 		};
- 
- 		partition@1c00000 {
--			label = "alt_kernel";
-+			label = "kernel2";
- 			reg = <0x1C00000 0x2A0000>;
- 		};
- 
- 		partition@1ea0000 {
--			label = "alt_rootfs";
-+			label = "rootfs2";
- 			reg = <0x1EA0000 0x1760000>;
- 		};
- 
-@@ -207,53 +221,6 @@
- 
- &mdio {
- 	status = "okay";
--
--	switch@10 {
--		compatible = "marvell,mv88e6085";
--		#address-cells = <1>;
--		#size-cells = <0>;
--		reg = <16>;
--
--		ports {
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			port@0 {
--				reg = <0>;
--				label = "ethernet1";
--			};
--
--			port@1 {
--				reg = <1>;
--				label = "ethernet2";
--			};
--
--			port@2 {
--				reg = <2>;
--				label = "ethernet3";
--			};
--
--			port@3 {
--				reg = <3>;
--				label = "ethernet4";
--			};
--
--			port@4 {
--				reg = <4>;
--				label = "internet";
--			};
--
--			port@5 {
--				reg = <5>;
--				label = "cpu";
--				ethernet = <&eth0port>;
--				fixed-link {
--					speed = <1000>;
--					full-duplex;
--				};
--			};
--		};
--	};
- };
- 
- &uart0 {
-@@ -272,10 +239,14 @@
- };
- 
- /* eth1 is connected to the switch at port 6. However DSA only supports a
-- * single CPU port. So leave this port disabled to avoid confusion.
-+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
-  */
- &eth1 {
--	status = "disabled";
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
- };
- 
- /* There is no battery on the board, so the RTC does not keep
diff --git a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
deleted file mode 100644
index 9ac30b6d30..0000000000
--- a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
+++ /dev/null
@@ -1,130 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -256,6 +256,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ds411.dtb \
- 	kirkwood-ds411j.dtb \
- 	kirkwood-ds411slim.dtb \
-+	kirkwood-goflexhome.dtb \
- 	kirkwood-goflexnet.dtb \
- 	kirkwood-guruplug-server-plus.dtb \
- 	kirkwood-ib62x0.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "Seagate GoFlex Home";
-+	compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x8000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-+		stdout-path = &uart0;
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_usb_power_enable: pmx-usb-power-enable {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_white: pmx-led-white {
-+				marvell,pins = "mpp40";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_green: pmx-led_green {
-+				marvell,pins = "mpp46";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_orange: pmx-led-orange {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+		};
-+		serial@12000 {
-+			status = "ok";
-+		};
-+
-+		sata@80000 {
-+			status = "okay";
-+			nr-ports = <2>;
-+		};
-+
-+	};
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		health {
-+			label = "status:green:health";
-+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+		fault {
-+			label = "status:orange:fault";
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+		misc {
-+			label = "status:white:misc";
-+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "disk-activity";
-+		};
-+	};
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_usb_power_enable>;
-+		pinctrl-names = "default";
-+
-+		usb_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			enable-active-high;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&nand {
-+	chip-delay = <40>;
-+	status = "okay";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0000000 0x100000>;
-+		read-only;
-+	};
-+
-+	partition@100000 {
-+		label = "ubi";
-+		reg = <0x100000 0x0ff00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@0 {
-+		reg = <0>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
deleted file mode 100644
index b22176880b..0000000000
--- a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
-+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
-@@ -159,18 +159,8 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
--	};
--
--	partition@500000 {
--		label = "pogoplug";
--		reg = <0x0500000 0x2000000>;
--	};
--
--	partition@2500000 {
--		label = "root";
--		reg = <0x02500000 0xd800000>;
-+		label = "ubi";
-+		reg = <0x0100000 0x0ff00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch
deleted file mode 100644
index df654033fd..0000000000
--- a/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-@@ -112,40 +112,16 @@
- 
- 	partition@0 {
- 		label = "uboot";
--		reg = <0x0000000 0x0100000>;
-+		reg = <0x0000000 0x00c0000>;
- 		read-only;
- 	};
- 	partition@100000 {
- 		label = "uboot_env";
--		reg = <0x0100000 0x0080000>;
-+		reg = <0x00c0000 0x0080000>;
- 	};
--	partition@180000 {
--		label = "key_store";
--		reg = <0x0180000 0x0080000>;
--	};
--	partition@200000 {
--		label = "info";
--		reg = <0x0200000 0x0080000>;
--	};
--	partition@280000 {
--		label = "etc";
--		reg = <0x0280000 0x0a00000>;
--	};
--	partition@c80000 {
--		label = "kernel_1";
--		reg = <0x0c80000 0x0a00000>;
--	};
--	partition@1680000 {
--		label = "rootfs1";
--		reg = <0x1680000 0x2fc0000>;
--	};
--	partition@4640000 {
--		label = "kernel_2";
--		reg = <0x4640000 0x0a00000>;
--	};
--	partition@5040000 {
--		label = "rootfs2";
--		reg = <0x5040000 0x2fc0000>;
-+	partition@140000 {
-+		label = "ubi";
-+		reg = <0x0140000 0x7ec0000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
deleted file mode 100644
index f8b963e03f..0000000000
--- a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-kirkwood: add nsa310b dtb, a zyxel nsa310 variant
-
-add support to a nsa310 variant with red/green usb led
-and lm85 temp/fan controller
-
-Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
-
-NOTE: this patch can be upstreamed as-is, LEDE-specific
-		nand partitions are set in another patch
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -287,6 +287,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ns2mini.dtb \
- 	kirkwood-nsa310.dtb \
- 	kirkwood-nsa310a.dtb \
-+	kirkwood-nsa310b.dtb \
- 	kirkwood-nsa320.dtb \
- 	kirkwood-nsa325.dtb \
- 	kirkwood-openblocks_a6.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
-@@ -0,0 +1,124 @@
-+/dts-v1/;
-+
-+#include "kirkwood-nsa3x0-common.dtsi"
-+
-+/*
-+ * There are at least two different NSA310 designs. This variant has
-+ * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
-+ */
-+
-+/ {
-+	model = "ZyXEL NSA310b";
-+	compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x10000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+		stdout-path = &uart0;
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pinctrl-names = "default";
-+
-+			pmx_led_esata_green: pmx-led-esata-green {
-+				marvell,pins = "mpp12";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_esata_red: pmx-led-esata-red {
-+				marvell,pins = "mpp13";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_usb_green: pmx-led-usb-green {
-+				marvell,pins = "mpp15";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_usb_red: pmx-led-usb-red {
-+				marvell,pins = "mpp16";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_sys_green: pmx-led-sys-green {
-+				marvell,pins = "mpp28";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_sys_red: pmx-led-sys-red {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_hdd_green: pmx-led-hdd-green {
-+				marvell,pins = "mpp41";
-+				marvell,function = "gpio";
-+			};
-+
-+			pmx_led_hdd_red: pmx-led-hdd-red {
-+				marvell,pins = "mpp42";
-+				marvell,function = "gpio";
-+			};
-+
-+		};
-+
-+		i2c@11000 {
-+			status = "okay";
-+
-+			lm85: lm85@2e {
-+				compatible = "national,lm85";
-+				reg = <0x2e>;
-+			};
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		green-sys {
-+			label = "nsa310:green:sys";
-+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-sys {
-+			label = "nsa310:red:sys";
-+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd {
-+			label = "nsa310:green:hdd";
-+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd {
-+			label = "nsa310:red:hdd";
-+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-esata {
-+			label = "nsa310:green:esata";
-+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-esata {
-+			label = "nsa310:red:esata";
-+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-usb {
-+			label = "nsa310:green:usb";
-+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-usb {
-+			label = "nsa310:red:usb";
-+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-copy {
-+			label = "nsa310:green:copy";
-+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-copy {
-+			label = "nsa310:red:copy";
-+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-4.19/108-on100.patch b/target/linux/kirkwood/patches-4.19/108-on100.patch
deleted file mode 100644
index 2f535955dd..0000000000
--- a/target/linux/kirkwood/patches-4.19/108-on100.patch
+++ /dev/null
@@ -1,171 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-on100.dts
-@@ -0,0 +1,158 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Cisco Systems ON100";
-+	compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x20000000>;
-+	};
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		pinctrl-0 = <&pmx_btn_reset>;
-+		pinctrl-names = "default";
-+
-+		reset {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
-+		pinctrl-names = "default";
-+
-+		health-g {
-+			label = "on100:green:health";
-+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		health-r {
-+			label = "on100:red:health";
-+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		health2-g {
-+			label = "on100:green:health2";
-+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		health2-r {
-+			label = "on100:red:health2";
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+		phy-connection-type = "rgmii-id";
-+	};
-+};
-+
-+&eth1 {
-+	status = "okay";
-+
-+	ethernet1-port@0 {
-+		phy-handle = <&ethphy1>;
-+		phy-connection-type = "rgmii-id";
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@0 {
-+		/* Marvell 88E1121R */
-+		compatible = "ethernet-phy-id0141.0cb0",
-+			     "ethernet-phy-ieee802.3-c22";
-+		reg = <0>;
-+	};
-+
-+	ethphy1: ethernet-phy@1 {
-+		/* Marvell 88E1121R */
-+		compatible = "ethernet-phy-id0141.0cb0",
-+			     "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x00000000 0x000a0000>;
-+		read-only;
-+	};
-+
-+	partition@a0000 {
-+		label = "u-boot environment";
-+		reg = <0x000a0000 0x00020000>;
-+		read-only;
-+	};
-+
-+	partition@c0000 {
-+		label = "kernel";
-+		reg = <0x000c0000 0x00540000>;
-+	};
-+
-+	partition@600000 {
-+		label = "ubi";
-+		reg = <0x00600000 0x1fa00000>;
-+	};
-+};
-+
-+&pinctrl {
-+	pmx_led_health_r: pmx-led-health-r {
-+		marvell,pins = "mpp45";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_led_health_g: pmx-led-health-g {
-+		marvell,pins = "mpp44";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_led_health2_r: pmx-led-health2-r {
-+		marvell,pins = "mpp47";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_led_health2_g: pmx-led-health2-g {
-+		marvell,pins = "mpp46";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_btn_reset: pmx-led-reset {
-+		marvell,pins = "mpp31";
-+		marvell,function = "gpio";
-+	};
-+};
-+
-+&sdio {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -290,6 +290,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-nsa310b.dtb \
- 	kirkwood-nsa320.dtb \
- 	kirkwood-nsa325.dtb \
-+	kirkwood-on100.dtb \
- 	kirkwood-openblocks_a6.dtb \
- 	kirkwood-openblocks_a7.dtb \
- 	kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
deleted file mode 100644
index b54768290e..0000000000
--- a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
+++ /dev/null
@@ -1,59 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-@@ -24,6 +24,7 @@
- 	};
- 
- 	chosen {
-+		bootargs = "console=ttyS0,115200";
- 		stdout-path = "uart0:115200n8";
- 	};
- 
-@@ -37,8 +38,8 @@
- 		eject {
- 			debounce-interval = <50>;
- 			wakeup-source;
--			linux,code = <KEY_EJECTCD>;
--			label = "Eject Button";
-+			linux,code = <KEY_RESTART>;
-+			label = "Reset";
- 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-@@ -137,29 +138,19 @@
- 		#size-cells = <1>;
- 
- 		partition@0 {
--			label = "u-boot";
--			reg = <0x00000000 0x200000>;
-+			label = "uboot";
-+			reg = <0x00000000 0x1c0000>;
- 			read-only;
- 		};
- 
--		partition@200000 {
--			label = "uImage";
--			reg = <0x00200000 0x300000>;
--		};
--
--		partition@500000 {
--			label = "uImage2";
--			reg = <0x00500000 0x300000>;
-+		partition@1c0000 {
-+			label = "uboot_env";
-+			reg = <0x001c0000 0x40000>;
- 		};
- 
--		partition@800000 {
--			label = "failsafe";
--			reg = <0x00800000 0x800000>;
--		};
--
--		partition@1000000 {
--			label = "root";
--			reg = <0x01000000 0x7000000>;
-+		partition@200000 {
-+			label = "ubi";
-+			reg = <0x00200000 0x7e00000>;
- 		};
- 	};
- };
diff --git a/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch
deleted file mode 100644
index 71d9bba3f1..0000000000
--- a/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -118,6 +118,7 @@ config MACH_DOVE
- config MACH_KIRKWOOD
- 	bool "Marvell Kirkwood boards"
- 	depends on ARCH_MULTI_V5
-+	select ARCH_WANT_LIBATA_LEDS
- 	select CPU_FEROCEON
- 	select GPIOLIB
- 	select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch
deleted file mode 100644
index 860d7b0728..0000000000
--- a/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- 				  const struct mtd_partition **pparts,
- 				  struct mtd_part_parser_data *data)
-@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct
- 	struct mtd_partition *parts;
- 	struct device_node *mtd_node;
- 	struct device_node *ofpart_node;
-+	const char *owrtpart = "ubi";
- 	const char *partname;
- 	struct device_node *pp;
- 	int nr_parts, i, ret = 0;
-@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct
- 		parts[i].size = of_read_number(reg + a_cells, s_cells);
- 		parts[i].of_node = pp;
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (mangled_rootblock && (i == mangled_rootblock)) {
-+			partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
-+
- 		parts[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -219,6 +228,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &mangled_rootblock);
-+
-+	if (!mangled_rootblock)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/mpc85xx/Makefile b/target/linux/mpc85xx/Makefile
index 9db478d87b..e08b00ab8e 100644
--- a/target/linux/mpc85xx/Makefile
+++ b/target/linux/mpc85xx/Makefile
@@ -15,7 +15,6 @@ MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 SUBTARGETS:=generic p1020 p2020
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 KERNELNAME:=zImage
 
diff --git a/target/linux/mpc85xx/patches-4.19/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-4.19/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
deleted file mode 100644
index 58c4be6007..0000000000
--- a/target/linux/mpc85xx/patches-4.19/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/powerpc/platforms/85xx/common.c
-+++ b/arch/powerpc/platforms/85xx/common.c
-@@ -33,6 +33,7 @@ static const struct of_device_id mpc85xx
- 	{ .compatible = "fsl,mpc8548-guts", },
- 	/* Probably unnecessary? */
- 	{ .compatible = "gpio-leds", },
-+	{ .compatible = "gpio-keys", },
- 	/* For all PCI controllers */
- 	{ .compatible = "fsl,mpc8540-pci", },
- 	{ .compatible = "fsl,mpc8548-pcie", },
diff --git a/target/linux/mpc85xx/patches-4.19/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-4.19/100-powerpc-85xx-tl-wdr4900-v1-support.patch
deleted file mode 100644
index 38380773ac..0000000000
--- a/target/linux/mpc85xx/patches-4.19/100-powerpc-85xx-tl-wdr4900-v1-support.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 20 Feb 2013 08:40:33 +0100
-Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
- board
-
-This patch adds support for the TP-Link TL-WDR4900 v1
-concurrent dual-band wireless router. The devices uses
-the Freescale P1014 SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/Makefile           |  3 ++-
- arch/powerpc/boot/wrapper            |  5 +++++
- arch/powerpc/platforms/85xx/Kconfig  | 12 ++++++++++++
- arch/powerpc/platforms/85xx/Makefile |  1 +
- 4 files changed, 20 insertions(+), 1 deletion(-)
-
-diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
-index 25e3184f11f7..0826346fd97c 100644
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -164,6 +164,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
- 
- src-wlib := $(sort $(src-wlib-y))
- src-plat := $(sort $(src-plat-y))
-@@ -343,7 +344,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
- image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
--
-+image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
- 
-diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
-index f9141eaec6ff..bd55094d9899 100755
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -302,6 +302,11 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
-     binary=y
-     ;;
-+simpleboot-tl-wdr4900-v1)
-+    platformo="$object/fixed-head.o $object/simpleboot.o"
-+    link_address='0x1000000'
-+    binary=y
-+    ;;
- simpleboot-virtex405-*)
-     platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
-     binary=y
-diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
-index 68920d42b4bc..2bf6533ce023 100644
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -170,6 +170,18 @@ config STX_GP3
- 	select CPM2
- 	select DEFAULT_UIMAGE
- 
-+config TL_WDR4900_V1
-+    bool "TP-Link TL-WDR4900 v1"
-+    select DEFAULT_UIMAGE
-+    select ARCH_REQUIRE_GPIOLIB
-+    select GPIO_MPC8XXX
-+    select SWIOTLB
-+    help
-+      This option enables support for the TP-Link TL-WDR4900 v1 board.
-+
-+      This board is a Concurrent Dual-Band wireless router with a
-+      Freescale P1014 SoC.
-+
- config TQM8540
- 	bool "TQ Components TQM8540"
- 	help
-diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
-index d1dd0dca5ebf..d0dab29a33eb 100644
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
- obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
-+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_SBC8548)     += sbc8548.o
- obj-$(CONFIG_PPA8548)     += ppa8548.o
- obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
--- 
-2.20.1
-
diff --git a/target/linux/mpc85xx/patches-4.19/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-4.19/101-powerpc-85xx-hiveap-330-support.patch
deleted file mode 100644
index 34568398c2..0000000000
--- a/target/linux/mpc85xx/patches-4.19/101-powerpc-85xx-hiveap-330-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -49,6 +49,17 @@ config BSC9132_QDS
- 	  and dual StarCore SC3850 DSP cores.
- 	  Manufacturer : Freescale Semiconductor, Inc
- 
-+config HIVEAP_330
-+    bool "Aerohive HiveAP-330"
-+    select DEFAULT_UIMAGE
-+    select ARCH_REQUIRE_GPIOLIB
-+    select GPIO_MPC8XXX
-+    help
-+      This option enables support for the Aerohive HiveAP-330 board.
-+
-+      This board is a Concurrent Dual-Band wireless access point with a
-+      Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -10,6 +10,7 @@ obj-y += common.o
- obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
- obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
- obj-$(CONFIG_C293_PCIE)   += c293pcie.o
-+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
- obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/target/linux/mpc85xx/patches-4.19/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-4.19/102-powerpc-add-cmdline-override.patch
deleted file mode 100644
index a99555f949..0000000000
--- a/target/linux/mpc85xx/patches-4.19/102-powerpc-add-cmdline-override.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -809,6 +809,14 @@ config CMDLINE_FORCE
- 	  This is useful if you cannot or don't want to change the
- 	  command-line options your boot loader passes to the kernel.
- 
-+config CMDLINE_OVERRIDE
-+    bool "Use alternative cmdline from device tree"
-+    help
-+      Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
-+      be used, this is not a good option for kernels that are shared across
-+      devices. This setting enables using "chosen/cmdline-override" as the
-+      cmdline if it exists in the device tree.
-+
- config EXTRA_TARGETS
- 	string "Additional default image types"
- 	help
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1091,6 +1091,17 @@ int __init early_init_dt_scan_chosen(uns
- 	if (p != NULL && l > 0)
- 		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
- 
-+    /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
-+     * device tree option of chosen/bootargs-override. This is
-+     * helpful on boards where u-boot sets bootargs, and is unable
-+     * to be modified.
-+     */
-+#ifdef CONFIG_CMDLINE_OVERRIDE
-+	p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+	if (p != NULL && l > 0)
-+		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-+#endif
-+
- 	/*
- 	 * CONFIG_CMDLINE is meant to be a default in case nothing else
- 	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
diff --git a/target/linux/mpc85xx/patches-4.19/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-4.19/103-powerpc-85xx-red-15w-rev1.patch
deleted file mode 100644
index b84a56659c..0000000000
--- a/target/linux/mpc85xx/patches-4.19/103-powerpc-85xx-red-15w-rev1.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -173,6 +173,16 @@ config XES_MPC85xx
- 	  Manufacturer: Extreme Engineering Solutions, Inc.
- 	  URL: <http://www.xes-inc.com/>
- 
-+config RED_15W_REV1
-+	bool "Sophos RED 15w Rev.1"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Sophos RED 15w Rev.1 board.
-+
-+	  This board is a wireless VPN router with a Freescale P1010 SoC.
-+
- config STX_GP3
- 	bool "Silicon Turnkey Express GP3"
- 	help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
-+obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
- obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
- obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
- obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
diff --git a/target/linux/mpc85xx/patches-4.19/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-4.19/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
deleted file mode 100644
index 39c72314b8..0000000000
--- a/target/linux/mpc85xx/patches-4.19/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 30 Dec 2018 23:24:41 +0100
-Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
-
-This patch apply chages for OpenWRT in P2020RDB
-dts file.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
- 1 file changed, 63 insertions(+), 35 deletions(-)
-
---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-@@ -2,6 +2,7 @@
-  * P2020 RDB Device Tree Source
-  *
-  * Copyright 2009-2012 Freescale Semiconductor Inc.
-+ * Copyright 2018      Pawel Dembicki <paweldembicki@gmail.com>
-  *
-  * This program is free software; you can redistribute  it and/or modify it
-  * under  the terms of  the GNU General  Public License as published by the
-@@ -9,10 +10,15 @@
-  * option) any later version.
-  */
- 
-+/dts-v1/;
-+
- /include/ "p2020si-pre.dtsi"
- 
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
- / {
--	model = "fsl,P2020RDB";
-+	model = "Freescale P2020RDB";
- 	compatible = "fsl,P2020RDB";
- 
- 	aliases {
-@@ -38,48 +44,38 @@
- 			  0x2 0x0 0x0 0xffb00000 0x00020000>;
- 
- 		nor@0,0 {
--			#address-cells = <1>;
--			#size-cells = <1>;
- 			compatible = "cfi-flash";
- 			reg = <0x0 0x0 0x1000000>;
- 			bank-width = <2>;
- 			device-width = <1>;
- 
--			partition@0 {
--				/* This location must not be altered  */
--				/* 256KB for Vitesse 7385 Switch firmware */
--				reg = <0x0 0x00040000>;
--				label = "NOR (RO) Vitesse-7385 Firmware";
--				read-only;
--			};
--
--			partition@40000 {
--				/* 256KB for DTB Image */
--				reg = <0x00040000 0x00040000>;
--				label = "NOR (RO) DTB Image";
--				read-only;
--			};
-+			partitions {
-+				compatible = "fixed-partitions";
-+				#address-cells = <1>;
-+				#size-cells = <1>;
- 
--			partition@80000 {
--				/* 3.5 MB for Linux Kernel Image */
--				reg = <0x00080000 0x00380000>;
--				label = "NOR (RO) Linux Kernel Image";
--				read-only;
--			};
-+				partition@0 {
-+					/* This location must not be altered  */
-+					/* 256KB for Vitesse 7385 Switch firmware */
-+					reg = <0x0 0x00040000>;
-+					label = "NOR (RO) Vitesse-7385 Firmware";
-+					read-only;
-+				};
- 
--			partition@400000 {
--				/* 11MB for JFFS2 based Root file System */
--				reg = <0x00400000 0x00b00000>;
--				label = "NOR (RW) JFFS2 Root File System";
--			};
-+				partition@40000 {
-+					compatible = "denx,fit";
-+					reg = <0x00040000 0x00ec0000>;
-+					label = "firmware";
-+				};
- 
--			partition@f00000 {
--				/* This location must not be altered  */
--				/* 512KB for u-boot Bootloader Image */
--				/* 512KB for u-boot Environment Variables */
--				reg = <0x00f00000 0x00100000>;
--				label = "NOR (RO) U-Boot Image";
--				read-only;
-+				partition@f00000 {
-+					/* This location must not be altered  */
-+					/* 512KB for u-boot Bootloader Image */
-+					/* 512KB for u-boot Environment Variables */
-+					reg = <0x00f00000 0x00100000>;
-+					label = "u-boot";
-+					read-only;
-+				};
- 			};
- 		};
- 
-@@ -144,13 +140,43 @@
- 	soc: soc@ffe00000 {
- 		ranges = <0x0 0x0 0xffe00000 0x100000>;
- 
-+		gpio0: gpio-controller@fc00 {
-+		};
-+
- 		i2c@3000 {
-+			temperature-sensor@4c {
-+				compatible = "adi,adt7461";
-+				reg = <0x4c>;
-+			};
-+
-+			eeprom@50 {
-+				compatible = "atmel,24c256";
-+				reg = <0x50>;
-+			};
-+
- 			rtc@68 {
- 				compatible = "dallas,ds1339";
- 				reg = <0x68>;
- 			};
- 		};
- 
-+		i2c@3100 {
-+			pmic@11 {
-+				compatible = "zl2006";
-+				reg = <0x11>;
-+			};
-+
-+			gpio@18 {
-+				compatible = "nxp,pca9557";
-+				reg = <0x18>;
-+			};
-+
-+			eeprom@52 {
-+				compatible = "atmel,24c01";
-+				reg = <0x52>;
-+			};
-+		};
-+
- 		spi@7000 {
- 			flash@0 {
- 				#address-cells = <1>;
-@@ -204,10 +230,12 @@
- 			phy0: ethernet-phy@0 {
- 				interrupts = <3 1 0 0>;
- 				reg = <0x0>;
-+				reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- 			};
- 			phy1: ethernet-phy@1 {
- 				interrupts = <3 1 0 0>;
- 				reg = <0x1>;
-+				reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- 			};
- 			tbi-phy@2 {
- 				device_type = "tbi-phy";
diff --git a/target/linux/mpc85xx/patches-4.19/105-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-4.19/105-powerpc-85xx-panda-support.patch
deleted file mode 100644
index a08bc302f2..0000000000
--- a/target/linux/mpc85xx/patches-4.19/105-powerpc-85xx-panda-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -60,6 +60,17 @@ config HIVEAP_330
-       This board is a Concurrent Dual-Band wireless access point with a
-       Freescale P1020 SoC.
- 
-+config PANDA
-+	bool "OCEDO PANDA"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the OCEDO PANDA board.
-+
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
- obj-$(CONFIG_P1022_DS)    += p1022_ds.o
- obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
-+obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
diff --git a/target/linux/octeon/Makefile b/target/linux/octeon/Makefile
index 202ed39be7..6c0623cb9b 100644
--- a/target/linux/octeon/Makefile
+++ b/target/linux/octeon/Makefile
@@ -14,7 +14,6 @@ CPU_TYPE:=octeonplus
 MAINTAINER:=John Crispin <john@phrozen.org>
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 define Target/Description
 	Build firmware images for Cavium Networks Octeon-based boards.
diff --git a/target/linux/octeon/patches-4.19/100-ubnt_edgerouter2_support.patch b/target/linux/octeon/patches-4.19/100-ubnt_edgerouter2_support.patch
deleted file mode 100644
index 991eb56ce2..0000000000
--- a/target/linux/octeon/patches-4.19/100-ubnt_edgerouter2_support.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -295,6 +295,8 @@ enum cvmx_board_types_enum {
- 	 */
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
- 	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
-+	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
-+	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
- 	CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
- 	CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
-@@ -396,6 +398,8 @@ static inline const char *cvmx_board_typ
- 		    /* Customer private range */
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
---- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-@@ -173,6 +173,8 @@ int cvmx_helper_board_get_mii_address(in
- 			return 7 - ipd_port;
- 		else
- 			return -1;
-+	case CVMX_BOARD_TYPE_UBNT_E200:
-+		return -1;
- 	case CVMX_BOARD_TYPE_KONTRON_S1901:
- 		if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
- 			return 1;
diff --git a/target/linux/octeon/patches-4.19/110-er200-ethernet_probe_order.patch b/target/linux/octeon/patches-4.19/110-er200-ethernet_probe_order.patch
deleted file mode 100644
index 93d1e93505..0000000000
--- a/target/linux/octeon/patches-4.19/110-er200-ethernet_probe_order.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -670,6 +670,7 @@ static int cvm_oct_probe(struct platform
- 	int interface;
- 	int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
- 	int qos;
-+	int i;
- 	struct device_node *pip;
- 	int mtu_overhead = ETH_HLEN + ETH_FCS_LEN;
- 
-@@ -793,13 +794,19 @@ static int cvm_oct_probe(struct platform
- 	}
- 
- 	num_interfaces = cvmx_helper_get_number_of_interfaces();
--	for (interface = 0; interface < num_interfaces; interface++) {
--		cvmx_helper_interface_mode_t imode =
--		    cvmx_helper_interface_get_mode(interface);
--		int num_ports = cvmx_helper_ports_on_interface(interface);
-+	for (i = 0; i < num_interfaces; i++) {
-+		cvmx_helper_interface_mode_t imode;
-+		int interface;
-+		int num_ports;
- 		int port;
- 		int port_index;
- 
-+		interface = i;
-+		if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_UBNT_E200)
-+			interface = num_interfaces - (i + 1);
-+
-+		num_ports = cvmx_helper_ports_on_interface(interface);
-+		imode = cvmx_helper_interface_get_mode(interface);
- 		for (port_index = 0,
- 		     port = cvmx_helper_get_ipd_port(interface, 0);
- 		     port < cvmx_helper_get_ipd_port(interface, num_ports);
diff --git a/target/linux/octeon/patches-4.19/120-cmdline-hack.patch b/target/linux/octeon/patches-4.19/120-cmdline-hack.patch
deleted file mode 100644
index 2b5978c5ee..0000000000
--- a/target/linux/octeon/patches-4.19/120-cmdline-hack.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/mips/cavium-octeon/setup.c
-+++ b/arch/mips/cavium-octeon/setup.c
-@@ -651,6 +651,35 @@ void octeon_user_io_init(void)
- 	write_c0_derraddr1(0);
- }
- 
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+extern char __image_cmdline[];
-+
-+static int __init octeon_use_image_cmdline(void)
-+{
-+       char *p = __image_cmdline;
-+       int replace = 0;
-+
-+       if (*p == '-') {
-+               replace = 1;
-+               p++;
-+       }
-+
-+       if (*p == '\0')
-+               return 0;
-+
-+       if (replace) {
-+               strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
-+       } else {
-+               strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-+               strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-+       }
-+
-+       return 1;
-+}
-+#else
-+static inline int octeon_use_image_cmdline(void) { return 0; }
-+#endif
-+
- /**
-  * Early entry point for arch setup
-  */
-@@ -895,6 +924,8 @@ void __init prom_init(void)
- 		}
- 	}
- 
-+	octeon_use_image_cmdline();
-+
- 	if (strstr(arcs_cmdline, "console=") == NULL) {
- 		if (octeon_uart == 1)
- 			strcat(arcs_cmdline, " console=ttyS1,115200");
diff --git a/target/linux/orion/Makefile b/target/linux/orion/Makefile
deleted file mode 100644
index 994c37ea6a..0000000000
--- a/target/linux/orion/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Copyright (C) 2008-2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=arm
-BOARD:=orion
-BOARDNAME:=Marvell Orion
-FEATURES:=broken rtc
-SUBTARGETS:=generic harddisk
-MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-
-KERNEL_PATCHVER:=4.9
-
-include $(INCLUDE_DIR)/target.mk
-
-KERNELNAME:=zImage
-
-DEFAULT_PACKAGES += kmod-ath9k wpad-basic kmod-rtc-isl1208 uboot-envtools
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/orion/base-files/etc/board.d/02_network b/target/linux/orion/base-files/etc/board.d/02_network
deleted file mode 100755
index ab74bf3713..0000000000
--- a/target/linux/orion/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-if grep -q lan1 /proc/net/dev; then
-	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
-else
-	ucidef_set_interface_lan "eth0"
-fi
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb b/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb
deleted file mode 100644
index 2ae0f73bdc..0000000000
--- a/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb
+++ /dev/null
@@ -1,54 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-usb_led=''
-usb_device=''
-
-led_set_attr() {
-	[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
-}
-
-usb_led_set_timer() {
-	led_set_attr "${usb_led}" 'trigger' 'timer'
-	led_set_attr "${usb_led}" 'delay_on' "$1"
-	led_set_attr "${usb_led}" 'delay_off' "$2"
-}
-
-usb_led_on() {
-	led_set_attr "${usb_led}" 'trigger' 'none'
-	led_set_attr "${usb_led}" 'brightness' 255
-}
-
-usb_led_off() {
-	led_set_attr "${usb_led}" 'trigger' 'none'
-	led_set_attr "${usb_led}" 'brightness' 0
-}
-
-get_usb_led() {
-	. /lib/functions.sh
-
-	case "$(board_name)" in
-	 'Linksys WRT350N v2')
-		usb_led='wrt350nv2:green:usb'
-		usb_device='1-1:1.0'
-		;;
-	esac;
-}
-
-get_usb_led
-
-case "${ACTION}" in
- add)
-	# update LEDs
-	[ "${usb_device}" = "${DEVICENAME}" ] && usb_led_on
-	;;
- remove)
-	# update LEDs
-	[ "${usb_device}" = "${DEVICENAME}" ] && usb_led_off
-	;;
-esac
diff --git a/target/linux/orion/base-files/lib/preinit/01_sysinfo b/target/linux/orion/base-files/lib/preinit/01_sysinfo
deleted file mode 100644
index 1ef07d774f..0000000000
--- a/target/linux/orion/base-files/lib/preinit/01_sysinfo
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-do_sysinfo_orion() {
-	local name="$(sed -n /Hardware/s/.*:.//p /proc/cpuinfo)"
-	[ -z "$name" ] && name="unknown"
-
-	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-	echo "$name" > /tmp/sysinfo/board_name
-	echo "unknown" > /tmp/sysinfo/model
-}
-
-boot_hook_add preinit_main do_sysinfo_orion
diff --git a/target/linux/orion/config-4.9 b/target/linux/orion/config-4.9
deleted file mode 100644
index 56ae5ee98a..0000000000
--- a/target/linux/orion/config-4.9
+++ /dev/null
@@ -1,246 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_ORION5X=y
-# CONFIG_ARCH_ORION5X_DT is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 earlyprintk"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_LL_UART_8250=y
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xf1012000
-CONFIG_DEBUG_UART_VIRT=0xfe012000
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-# CONFIG_MACH_D2NET_DT is not set
-# CONFIG_MACH_DB88F5281 is not set
-# CONFIG_MACH_DNS323 is not set
-# CONFIG_MACH_DT2 is not set
-# CONFIG_MACH_KUROBOX_PRO is not set
-# CONFIG_MACH_LINKSTATION_LSCHL is not set
-# CONFIG_MACH_LINKSTATION_LS_HGL is not set
-# CONFIG_MACH_LINKSTATION_MINI is not set
-# CONFIG_MACH_LINKSTATION_PRO is not set
-# CONFIG_MACH_MSS2_DT is not set
-# CONFIG_MACH_MV2120 is not set
-# CONFIG_MACH_NET2BIG is not set
-# CONFIG_MACH_RD88F5181L_FXO is not set
-# CONFIG_MACH_RD88F5181L_GE is not set
-# CONFIG_MACH_RD88F5182 is not set
-# CONFIG_MACH_RD88F5182_DT is not set
-# CONFIG_MACH_RD88F6183AP_GE is not set
-CONFIG_MACH_TERASTATION_PRO2=y
-# CONFIG_MACH_TS209 is not set
-# CONFIG_MACH_TS409 is not set
-# CONFIG_MACH_TS78XX is not set
-CONFIG_MACH_WN802T=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_WRT350N_V2=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MMC=y
-CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MV643XX_ETH=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-# CONFIG_MVNETA is not set
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-# CONFIG_NET_VENDOR_AURORA is not set
-CONFIG_NO_BOOTMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PLAT_ORION=y
-CONFIG_PLAT_ORION_LEGACY=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_EXPERT is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware b/target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware
deleted file mode 100644
index 751749d13d..0000000000
--- a/target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware
+++ /dev/null
@@ -1,54 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-#
-# This script sets system defaults for the hardware on firstboot
-#
-
-. /lib/functions.sh
-
-wrt350nv2_default() {
-# leds
-	uci batch <<__EOF
-set system.power_led=led
-set system.power_led.name='Power LED (green)'
-set system.power_led.sysfs='wrt350nv2:green:power'
-set system.power_led.default='1'
-set system.wifi_led=led
-set system.wifi_led.name='Wireless LED (green)'
-set system.wifi_led.sysfs='wrt350nv2:green:wireless'
-set system.wifi_led.trigger='netdev'
-set system.wifi_led.dev='wlan0'
-set system.wifi_led.mode='link tx rx'
-set system.wifi_led.default='0'
-commit system
-__EOF
-
-# add mac address from U-Boot partition to lan and wan devices
-	MTD=`grep -e 'u-boot' /proc/mtd`
-	MTD=`echo ${MTD} | sed 's/[a-z]*\([0-9]*\):.*/\1/'`
-	[ -n "${MTD}" ] && {
-		MACADDR=`dd if=/dev/mtdblock${MTD} bs=1 skip=262048 count=6 2>/dev/null | hexdump -e '1/1 "%02x"'`
-		MACADDR2=$(( 0x${MACADDR} + 1))
-		MACADDR2=`printf "%012x" ${MACADDR2}`
-
-		MACADDR=`echo ${MACADDR} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
-		MACADDR2=`echo ${MACADDR2} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
-
-		uci set network.eth0.macaddr=${MACADDR}
-		uci set network.lan.macaddr=${MACADDR}
-		uci set network.wan.macaddr=${MACADDR2}
-		uci commit network
-	}
-}
-
-case "$(board_name)" in
- 'Linksys WRT350N v2')
-	wrt350nv2_default
-	;;
-esac
diff --git a/target/linux/orion/generic/base-files/lib/upgrade/platform.sh b/target/linux/orion/generic/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index db2330684d..0000000000
--- a/target/linux/orion/generic/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# Copyright (C) 2010-2011 OpenWrt.org
-#
-
-# use default "image" for PART_NAME
-# use default for platform_do_upgrade()
-
-platform_check_image() {
-	[ "${ARGC}" -gt 1 ] && { echo 'Too many arguments. Only flash file expected.'; return 1; }
-
-	local hardware="$(board_name)"
-	local magic="$(get_magic_word "$1")"
-	local magic_long="$(get_magic_long "$1")"
-
-	case "${hardware}" in
-	 # hardware with a direct uImage partition
-	 # image header format as described in U-Boot's include/image.h
-	 # see http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=blob;f=include/image.h
-	 'Linksys WRT350N v2')
-		[ "${magic_long}" != '27051956' ] && {
-			echo "Invalid image type ${magic_long}."
-			return 1
-		}
-		return 0
-		;;
-	 # Netgear WNR854T (has uImage as file inside a JFFS2 partition)
-	 'Netgear WNR854T')
-		[ "${magic}" != '8519' ] && {
-			echo "Invalid image type ${magic}."
-			return 1
-		}
-		return 0
-		;;
-	esac
-
-	echo "Sysupgrade is not yet supported on ${hardware}."
-	return 1
-}
diff --git a/target/linux/orion/generic/target.mk b/target/linux/orion/generic/target.mk
deleted file mode 100644
index 7b054edd6b..0000000000
--- a/target/linux/orion/generic/target.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Copyright (C) 2008-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-BOARDNAME:=Generic
-FEATURES+=squashfs
-
-define Target/Description
-	Build firmware images for Marvell Orion based boards that boot from internal flash.
-	(e.g.: Linksys WRT350N v2, Netgear WNR854T, ...)
-endef
diff --git a/target/linux/orion/harddisk/config-default b/target/linux/orion/harddisk/config-default
deleted file mode 100644
index bf6cee1715..0000000000
--- a/target/linux/orion/harddisk/config-default
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_ATA=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CRC16=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_SNAPSHOT is not set
-CONFIG_EXT4_FS=y
-CONFIG_FS_MBCACHE=y
-CONFIG_HWMON=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_JBD2=y
-CONFIG_MACH_DT2=y
-CONFIG_MACH_NET2BIG=y
-# CONFIG_MACH_WN802T is not set
-# CONFIG_MACH_WNR854T is not set
-# CONFIG_MACH_WRT350N_V2 is not set
-CONFIG_MD=y
-CONFIG_MD_AUTODETECT=y
-CONFIG_MD_LINEAR=y
-# CONFIG_MD_MULTIPATH is not set
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-CONFIG_NLS=y
-CONFIG_RTC_CLASS=y
-CONFIG_SATA_MV=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_UHCI_HCD is not set
diff --git a/target/linux/orion/harddisk/target.mk b/target/linux/orion/harddisk/target.mk
deleted file mode 100644
index 6096e69709..0000000000
--- a/target/linux/orion/harddisk/target.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Copyright (C) 2008-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-BOARDNAME:=Internal Hard-Disk
-FEATURES+=targz
-DEVICE_TYPE:=nas
-
-define Target/Description
-	Build firmware images for Marvell Orion based boards that boot directly from internal disk storage.
-	(e.g.: Freecom DataTank 2, ...)
-endef
diff --git a/target/linux/orion/image/Makefile b/target/linux/orion/image/Makefile
deleted file mode 100644
index 058519f720..0000000000
--- a/target/linux/orion/image/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright (C) 2008-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-include $(SUBTARGET).mk
-
-$(eval $(call BuildImage))
diff --git a/target/linux/orion/image/generic.mk b/target/linux/orion/image/generic.mk
deleted file mode 100644
index 22909ac73d..0000000000
--- a/target/linux/orion/image/generic.mk
+++ /dev/null
@@ -1,237 +0,0 @@
-#
-# Copyright (C) 2008-2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-### DO NOT INDENT LINES CONTAINING $(call xyz) AS THIS MAY CHANGE THE CONTEXT
-### OF THE FIRST LINE IN THE CALLED VARIABLE (NOTE: variable!)
-### see http://www.gnu.org/software/make/manual/html_node/Call-Function.html#Call-Function
-### ACTUALLY IT IS A SIMPLE MACRO EXPANSION
-
-### use round brackets for make variables, and curly brackets for shell variables
-
-
-## Kernel mtd partition size in KiB
-KERNEL_MTD_SIZE:=1280
-
-# Netgear WNR854T: erase size is 128KiB = 0x00020000 = 131072
-ERASE_SIZE_128K:=128
-
-# Linksys WRT350N v2: erase size is 64KiB = 0x00010000 = 65536
-ERASE_SIZE_64K:=64
-
-# define JFFS2 sizes for include/image.mk
-JFFS2_BLOCKSIZE:=64k 128k
-
-
-###
-### Image/BuildKernel
-###
-
-define Image/BuildKernel
-### Dummy comment for indented calls of Image/BuildKernel
-
- ## Netgear WN802T: mach id 3306 (0x0cea)
-$(call Image/BuildKernel/ARM/zImage,wn802t,"\x0c\x1c\xa0\xe3\xea\x10\x81\xe3")
-$(call Image/BuildKernel/ARM/uImage,wn802t)
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-$(call Image/BuildKernel/ARM/zImage,wn802t,"\x0c\x1c\xa0\xe3\xea\x10\x81\xe3",-initramfs)
-$(call Image/BuildKernel/ARM/uImage,wn802t,-initramfs)
-endif
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)  # nothing more to do for a ramdisk build
-$(call Image/BuildKernel/JFFS2uImage,wn802t,$(ERASE_SIZE_64K),uImage)
-$(call Image/Default/FileSizeCheck,$(KDIR)/wn802t-uImage.jffs2,$(shell expr $(KERNEL_MTD_SIZE) \* 1024))
- endif
-
- ## Netgear WNR854T: mach id 1801 (0x0709)
-$(call Image/BuildKernel/ARM/zImage,wnr854t,"\x07\x1c\xa0\xe3\x09\x10\x81\xe3")
-$(call Image/BuildKernel/ARM/uImage,wnr854t)
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-$(call Image/BuildKernel/ARM/zImage,wnr854t,"\x07\x1c\xa0\xe3\x09\x10\x81\xe3",-initramfs)
-$(call Image/BuildKernel/ARM/uImage,wnr854t,-initramfs)
-endif
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)  # nothing more to do for a ramdisk build
-$(call Image/BuildKernel/JFFS2uImage,wnr854t,$(ERASE_SIZE_128K),uImage)
-$(call Image/Default/FileSizeCheck,$(KDIR)/wnr854t-uImage.jffs2,$(shell expr $(KERNEL_MTD_SIZE) \* 1024))
- endif
-
- ## Linksys WRT350N v2: mach id 1633 (0x0661)
-$(call Image/BuildKernel/ARM/zImage,wrt350nv2,"\x06\x1c\xa0\xe3\x61\x10\x81\xe3")
-$(call Image/BuildKernel/ARM/uImage,wrt350nv2)
-ifeq ($($CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-$(call Image/BuildKernel/ARM/zImage,wrt350nv2,"\x06\x1c\xa0\xe3\x61\x10\x81\xe3",-initramfs)
-$(call Image/BuildKernel/ARM/uImage,wrt350nv2-initramfs)
-endif
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)  # nothing more to do for a ramdisk build
-$(call Image/Default/FileSizeCheck,$(KDIR)/wrt350nv2-uImage,$(shell expr $(KERNEL_MTD_SIZE) \* 1024))
- endif
-
- ## Buffalo Terastation Pro II/Live: mach id 1584 (0x0630)
-$(call Image/BuildKernel/ARM/zImage,terastation-pro2,"\x06\x1c\xa0\xe3\x30\x10\x81\xe3")
-$(call Image/BuildKernel/ARM/uImage,terastation-pro2)
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-$(call Image/BuildKernel/ARM/zImage,terastation-pro2,"\x06\x1c\xa0\xe3\x30\x10\x81\xe3",-initramfs)
-$(call Image/BuildKernel/ARM/uImage,terastation-pro2,-initramfs)
-endif
-endef
-
-define Image/BuildKernel/ARM/zImage
- # merge machine id and regular zImage into one file
- # parameters: 1 = machine name, 2 = machine id as string in quotes
-	# $(BOARD) kernel zImage for $(1)
-	echo -en $(2) > '$(KDIR)/$(1)-zImage$(3)'
-	cat '$(KDIR)/zImage$(3)' >> '$(KDIR)/$(1)-zImage$(3)'
-endef
-
-define Image/BuildKernel/ARM/uImage
- # create uImage from zImage
- # parameters: 1 = machine name
-	# $(BOARD) kernel uImage for $(1)
-	'$(STAGING_DIR_HOST)/bin/mkimage' -A arm -O linux -T kernel \
-	-C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
-	-d '$(KDIR)/$(1)-zImage$(2)' '$(KDIR)/$(1)-uImage$(2)'
- ifeq ($(2),-initramfs) # only copy uImage for ramdisk build
-	cp '$(KDIR)/$(1)-uImage-initramfs' '$(BIN_DIR)/openwrt-$(1)-uImage-initramfs'
- endif
-endef
-
-define Image/BuildKernel/JFFS2uImage
- # create JFFS2 partition with uImage file (result is already padded to erase size)
- # parameters: 1 = machine name, 2 = erase size in KiB, 3 = uImage file name
-	# $(BOARD) kernel uImage for $(1) in JFFS2-$(2)k partition
-	rm -rf '$(TMP_DIR)/$(1)_jffs2_uimage'
-	mkdir '$(TMP_DIR)/$(1)_jffs2_uimage'
-	cp '$(KDIR)/$(1)-uImage' '$(TMP_DIR)/$(1)_jffs2_uimage/$(3)'
-	$(STAGING_DIR_HOST)/bin/mkfs.jffs2 --compression-mode=none --pad --little-endian --squash -e $(2)KiB -o '$(KDIR)/$(1)-uImage.jffs2' -d '$(TMP_DIR)/$(1)_jffs2_uimage'
-	rm -rf '$(TMP_DIR)/$(1)_jffs2_uimage'
-endef
-
-define Image/Default/FileSizeCheck
- # parameters: 1 = file path, 2 = maximum size in bytes
-	[ `stat -c %s '$(1)'` -le $(2) ] || { echo '   ERROR: $(1) too big (> $(2) bytes)'; rm -f $(1); }
-endef
-
-
-###
-### Image/Build
-###
-
-define Image/Build
-### Dummy comment for indented calls of Image/Build with $(1)
-
- ## Prepare rootfs
-$(call Image/Build/$(1),$(1))
-
- ## Netgear WN802T
-$(call Image/Build/Default,$(1),wn802t,$(ERASE_SIZE_64K),$(KERNEL_MTD_SIZE),.jffs2,NG_WN802T)
-
- ## Netgear WNR854T
-$(call Image/Build/Default,$(1),wnr854t,$(ERASE_SIZE_128K),$(KERNEL_MTD_SIZE),.jffs2,NG_WNR854T)
-
- ## Linksys WRT350N v2
-$(call Image/Build/Linksys/wrt350nv2,$(1),wrt350nv2,$(ERASE_SIZE_64K),$(KERNEL_MTD_SIZE),)
-
- ## Buffalo Terastation Pro II/Live
-$(call Image/Build/Default,$(1),terastation-pro2,$(ERASE_SIZE_128K),$(KERNEL_MTD_SIZE),.jffs2,TERASTATION_PRO2)
-endef
-
-define Image/Build/squashfs
-$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-endef
-
-## generate defines for all JFFS2 block sizes
-define Image/Build/jffs2/sub
- $(eval define Image/Build/jffs2-$(1)
-	cp '$$(KDIR)/root.jffs2-$(1)' '$$(BIN_DIR)/$$(IMG_PREFIX)-root.jffs2-$(1)'
- endef)
-endef
-
-$(foreach SZ,$(JFFS2_BLOCKSIZE),$(call Image/Build/jffs2/sub,$(SZ)))
-
-define Image/Build/Default
- # parameters: 1 = rootfs type, 2 = machine name, 3 = erase size in KiB, 4 = kernel mtd size in KiB, 5 = kernel file suffix, 6 = header
- ifeq ($(findstring jffs2-,$(1)),jffs2-)  # JFFS2: build only image fitting to erase size
-  ifeq ($(1),jffs2-$(3)k)
-$(call Image/Build/Default/sysupgrade,$(1),$(2),$(4),$(5))
-$(call Image/Build/Default/factory,$(1),$(2),$(6))
-  endif
- else
-  ifeq ($(1),ext4)  # EXT4: ignore
-   # do nothing
-  else  # do all other images
-$(call Image/Build/Default/sysupgrade,$(1),$(2),$(4),$(5))
-$(call Image/Build/Default/factory,$(1),$(2),$(6))
-  endif
- endif
-endef
-
-define Image/Build/Default/sysupgrade
- # parameters: 1 = rootfs type, 2 = machine name, 3 = pad size in KiB (kernel mtd size or erase size), 4 = kernel file suffix
-	# $(BOARD) $(1) sysupgrade image for $(2)
-	( \
-		dd if='$(KDIR)/$(2)-uImage$(4)' bs=$(3)k conv=sync; \
-		dd if='$(KDIR)/root.$(1)'; \
-	) > '$(BIN_DIR)/openwrt-$(2)-$(1)-sysupgrade.img'
-endef
-
-define Image/Build/Default/factory
- # parameters: 1 = rootfs type, 2 = machine name, 3 = header
-	# $(BOARD) $(1) factory upgrade image for $(2)
-	'$(STAGING_DIR_HOST)/bin/add_header' $(3) '$(BIN_DIR)/openwrt-$(2)-$(1)-sysupgrade.img' '$(BIN_DIR)/openwrt-$(2)-$(1)-factory.img'
-endef
-
-##
-## Image/Build/Linksys
-##
-
-define Image/Build/Linksys/wrt350nv2
- # parameters: 1 = rootfs type, 2 = machine name, 3 = erase size in KiB, 4 = kernel mtd size in KiB, 5 = kernel file suffix
- ifeq ($(findstring jffs2-,$(1)),jffs2-)  # JFFS2: build only image fitting to erase size
-  ifeq ($(1),jffs2-$(3)k)
-$(call Image/Build/Default/sysupgrade,$(1),$(2),$(4),$(5))
-$(call Image/Build/Linksys/wrt350nv2-builder,$(1),$(2))
-  endif
- else
-  ifeq ($(1),ext4)  # EXT4: ignore
-   # do nothing
-  else  # do all other images
-$(call Image/Build/Default/sysupgrade,$(1),$(2),$(4),$(5))
-$(call Image/Build/Linksys/wrt350nv2-builder,$(1),$(2))
-  endif
- endif
-endef
-
-define Image/Build/Linksys/wrt350nv2-builder
- # parameters: 1 = rootfs type, 2 = machine name
-	# $(BOARD) $(1) factory and recovery image for $(2) via wrt350nv2-builder
-	rm -rf '$(TMP_DIR)/$(2)_factory'
-	mkdir '$(TMP_DIR)/$(2)_factory'
- # create parameter file
-	echo ':image 0 $(BIN_DIR)/openwrt-$(2)-$(1)-sysupgrade.img' > '$(TMP_DIR)/$(2)_factory/$(2).par'
-	[ ! -f '$(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin' ] || ( \
-		echo ':u-boot 0 $(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin' >> '$(TMP_DIR)/$(2)_factory/$(2).par'; \
-	)
-	echo '#version 0x2020' >> '$(TMP_DIR)/$(2)_factory/$(2).par'
- # create bin file for recovery and factory image
-	-( \
-		cd '$(TMP_DIR)/$(2)_factory'; \
-		'$(STAGING_DIR_HOST)/bin/wrt350nv2-builder' -b '$(TMP_DIR)/$(2)_factory/$(2).par'; \
-	) && $(CP) '$(TMP_DIR)/$(2)_factory/wrt350n.bin' '$(BIN_DIR)/openwrt-$(2)-$(1)-recovery.bin' && \
-	( \
-		cd '$(TMP_DIR)/$(2)_factory'; \
-		zip 'wrt350n.zip' 'wrt350n.bin'; \
-	) && '$(STAGING_DIR_HOST)/bin/wrt350nv2-builder' -z '$(TMP_DIR)/$(2)_factory/wrt350n.zip' '$(BIN_DIR)/openwrt-$(2)-$(1)-factory.img'
-	rm -rf '$(TMP_DIR)/$(2)_factory'
-endef
-
-
-###
-### Image/PreReq
-###
-
-## Dependency for WRT350N v2 factory image
-$(eval $(call RequireCommand,zip, \
-	Please install zip. \
-))
diff --git a/target/linux/orion/image/harddisk.mk b/target/linux/orion/image/harddisk.mk
deleted file mode 100644
index fb2f351b7f..0000000000
--- a/target/linux/orion/image/harddisk.mk
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-# Copyright (C) 2008-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Image/BuildKernelMachId
-	echo -en "\x$(2)\x1c\xa0\xe3\x$(3)\x10\x81\xe3" > $(KDIR)/$(1)-zImage
-	cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/$(1)-zImage
-	$(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
-	-C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
-	-d $(KDIR)/$(1)-zImage $(KDIR)/$(1)-uImage
-	cp $(KDIR)/$(1)-uImage $(BIN_DIR)/openwrt-$(1)-uImage
-endef
-
-define Image/BuildKernel
-	# Orion Kernel uImages
- # DT2: mach id 1514 (0x5EA)
-	$(call Image/BuildKernelMachId,dt2,05,ea)
- # LaCie 2big Network: mach id 2342 (0x926)
-	$(call Image/BuildKernelMachId,net2big,09,26)
-endef
-
-define Image/Build/Freecom
-	# Orion Freecom Images
- # backup unwanted files
-	rm -rf ${TMP_DIR}/$2_backup
-	mkdir ${TMP_DIR}/$2_backup
-	-mv $(TARGET_DIR)/{var,jffs,rom} ${TMP_DIR}/$2_backup
- # add extra files
-	$(INSTALL_DIR) $(TARGET_DIR)/boot
-	# TODO: Add special CMDLINE shim for webupgrade image here
-	$(CP) $(KDIR)/dt2-uImage $(TARGET_DIR)/boot/uImage
-	$(INSTALL_DIR) $(TARGET_DIR)/var
- # create image
-	$(TAR) cfj $(BIN_DIR)/openwrt-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
-	$(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img $(3)
- # remove extra files
-	rm -rf $(TARGET_DIR)/{boot,var}
- # recover unwanted files
-	-mv ${TMP_DIR}/$2_backup/* $(TARGET_DIR)/
-	rm -rf ${TMP_DIR}/$2_backup
-endef
-
-define Image/Build
-$(call Image/Build/$(1),$(1))
-$(call Image/Build/Freecom,$(1),dt2,DT,$(1))
-endef
-
-define Image/Build/squashfs
-$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-	( \
-		dd if=$(KDIR)/uImage bs=1024k conv=sync; \
-		dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
-	) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).img
-endef
diff --git a/target/linux/orion/patches-4.9/000-arm_openwrt_machtypes.patch b/target/linux/orion/patches-4.9/000-arm_openwrt_machtypes.patch
deleted file mode 100644
index 764f992288..0000000000
--- a/target/linux/orion/patches-4.9/000-arm_openwrt_machtypes.patch
+++ /dev/null
@@ -1,8 +0,0 @@
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1006,3 +1006,5 @@ eco5_bx2		MACH_ECO5_BX2		ECO5_BX2		4572
- eukrea_cpuimx28sd	MACH_EUKREA_CPUIMX28SD	EUKREA_CPUIMX28SD	4573
- domotab			MACH_DOMOTAB		DOMOTAB			4574
- pfla03			MACH_PFLA03		PFLA03			4575
-+dt2			MACH_DT2		DT2			1514
-+wn802t			MACH_WN802T		WN802T			3306
diff --git a/target/linux/orion/patches-4.9/100-wrt350nv2_openwrt_partition_map.patch b/target/linux/orion/patches-4.9/100-wrt350nv2_openwrt_partition_map.patch
deleted file mode 100644
index 89c2c9420b..0000000000
--- a/target/linux/orion/patches-4.9/100-wrt350nv2_openwrt_partition_map.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -134,11 +134,11 @@ static struct mtd_partition wrt350n_v2_n
- 	{
- 		.name		= "kernel",
- 		.offset		= 0x00000000,
--		.size		= 0x00760000,
-+		.size		= 0x00140000,	// change to kernel mtd size here (1/3)
- 	}, {
- 		.name		= "rootfs",
--		.offset		= 0x001a0000,
--		.size		= 0x005c0000,
-+		.offset		= 0x00140000,	// change to kernel mtd size here (2/3)
-+		.size		= 0x00610000,	// adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size>
- 	}, {
- 		.name		= "lang",
- 		.offset		= 0x00760000,
-@@ -151,6 +151,14 @@ static struct mtd_partition wrt350n_v2_n
- 		.name		= "u-boot",
- 		.offset		= 0x007c0000,
- 		.size		= 0x00040000,
-+	}, {
-+		.name		= "eRcOmM_do_not_touch",
-+		.offset		= 0x00750000,
-+		.size		= 0x00010000,	// erasesize
-+	}, {
-+		.name		= "image",	// for sysupgrade
-+		.offset		= 0x00000000,
-+		.size		= 0x00750000,
- 	},
- };
- 
diff --git a/target/linux/orion/patches-4.9/101-wnr854t_partition_map.patch b/target/linux/orion/patches-4.9/101-wnr854t_partition_map.patch
deleted file mode 100644
index 881cfb773e..0000000000
--- a/target/linux/orion/patches-4.9/101-wnr854t_partition_map.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/arm/mach-orion5x/wnr854t-setup.c
-+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
-@@ -57,15 +57,19 @@ static struct mtd_partition wnr854t_nor_
- 	{
- 		.name		= "kernel",
- 		.offset		= 0x00000000,
--		.size		= 0x00100000,
-+		.size		= 0x00140000,
- 	}, {
- 		.name		= "rootfs",
--		.offset		= 0x00100000,
--		.size		= 0x00660000,
-+		.offset		= 0x00140000,
-+		.size		= 0x00620000,
- 	}, {
- 		.name		= "uboot",
- 		.offset		= 0x00760000,
- 		.size		= 0x00040000,
-+	}, {
-+		.name		= "image",	// for sysupgrade
-+		.offset		= 0x00000000,
-+		.size		= 0x00760000,
- 	},
- };
- 
diff --git a/target/linux/orion/patches-4.9/200-dt2_board_support.patch b/target/linux/orion/patches-4.9/200-dt2_board_support.patch
deleted file mode 100644
index 5528069cd5..0000000000
--- a/target/linux/orion/patches-4.9/200-dt2_board_support.patch
+++ /dev/null
@@ -1,562 +0,0 @@
---- a/arch/arm/mach-orion5x/Kconfig
-+++ b/arch/arm/mach-orion5x/Kconfig
-@@ -48,6 +48,13 @@ config MACH_RD88F5182_DT
- 	  Say 'Y' here if you want your kernel to support the Marvell
- 	  Orion-NAS (88F5182) RD2, Flattened Device Tree.
- 
-+config MACH_DT2
-+	bool "Freecom DataTank Gateway"
-+	select I2C_BOARDINFO
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Freecom DataTank Gateway
-+
- config MACH_KUROBOX_PRO
- 	bool "KuroBox Pro"
- 	select I2C_BOARDINFO if I2C
---- a/arch/arm/mach-orion5x/Makefile
-+++ b/arch/arm/mach-orion5x/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setu
- obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
- obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
- obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
-+obj-$(CONFIG_MACH_DT2)		+= dt2-setup.o
- obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
- obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
- obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
---- /dev/null
-+++ b/arch/arm/mach-orion5x/dt2-common.h
-@@ -0,0 +1,82 @@
-+#ifndef __INC_DT2_COMMON_H
-+#define __INC_DT2_COMMON_H
-+
-+#define ATAG_MV_UBOOT			0x41000403
-+
-+struct tag_mv_uboot {
-+	u32 uboot_version;
-+	u32 tclk;
-+	u32 sysclk;
-+	u32 isUsbHost;
-+	u32 overEthAddr;
-+	u8  dt2_eeprom[256];
-+};
-+
-+#define DT2_EEPROM_ADDR 		0x50
-+#define DT2_EEPROM_OFFSET		0
-+#define DT2_EEPROM_LENGTH		256
-+
-+#define DT2_SERIAL_NUMBER_DEFAULT	"run on default\0"
-+#define DT2_REVISION_DEFAULT_INIT 	0xFF
-+#define DT2_CONFIG_FLAGS_DEFAULT 	0x00
-+
-+#define _PACKED_	__attribute__((packed))
-+
-+struct DT2_EEPROM_SD_CONFIG {
-+	unsigned int	ram_1;
-+	unsigned int	ram_2;
-+	unsigned int	ram_3;
-+	unsigned int	ram_4;
-+	unsigned char	ram_5;
-+	unsigned char	ram_6;
-+	unsigned short	ram_7;
-+	unsigned int 	magic_id;
-+	} _PACKED_;		// 24 Bytes in total
-+
-+struct DT2_EEPROM_FC_CONFIG {
-+	unsigned char	rtc_sts_mask;
-+	unsigned char	rtc_sts_init;
-+	unsigned char	rtc_int_mask;
-+	unsigned char	rtc_int_init;
-+	unsigned char	rtc_atrim_init;
-+	unsigned char	rtc_dtrim_init;
-+	unsigned char	dummy1;
-+	unsigned char	dummy2;
-+	unsigned char	dt2_config_flags;	/* 0x80 to load rtc_values to RTC */
-+	unsigned char	dt2_revision;		/* upper nibble is HW, lower nibble is FW */
-+	unsigned char	dt2_serial_number[16];	/* Serial number of DT-2 */
-+	} _PACKED_;		// 26 Bytes in total
-+
-+#define CFG_LOAD_RTC_VALUES 	0x80
-+
-+struct DT2_EEPROM_GW_CONFIG {
-+	unsigned int	dummy1;
-+	unsigned int	dummy2;
-+	unsigned int	dummy3;
-+	unsigned char	dummy4;
-+	unsigned char	tos_video_val1;
-+	unsigned char	tos_video_val2;
-+	unsigned char	tos_voip_val;
-+	unsigned char	qos_igmp_cfg;
-+	unsigned char	num_of_ifs;
-+	unsigned short	vlan_ports_if[3];
-+	unsigned char	mac_addr[3][6];
-+	} _PACKED_;		// 42 Bytes in total
-+
-+#define _SIZE_OF_ALL_STRUCTS_ (sizeof(struct DT2_EEPROM_SD_CONFIG) + sizeof(struct DT2_EEPROM_FC_CONFIG) +  sizeof(struct DT2_EEPROM_GW_CONFIG))
-+
-+// MV = EEPROM - SD - FC - GW - CRC
-+struct DT2_EEPROM_MV_CONFIG {
-+	unsigned int reg_addr[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)];
-+	unsigned int reg_data[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)];
-+ 	} _PACKED_;
-+
-+struct DT2_EEPROM_STRUCT {
-+	struct DT2_EEPROM_MV_CONFIG mv;
-+	struct DT2_EEPROM_SD_CONFIG sd;
-+	struct DT2_EEPROM_FC_CONFIG fc;
-+	struct DT2_EEPROM_GW_CONFIG gw;
-+	unsigned int	crc;
-+	} _PACKED_;
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-orion5x/dt2-setup.c
-@@ -0,0 +1,448 @@
-+/*
-+ * arch/arm/mach-orion5x/dt2-setup.c
-+ *
-+ * Freecom DataTank Gateway Setup
-+ *
-+ * Copyright (C) 2009 Zintis Petersons <Zintis.Petersons@abcsolutions.lv>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/ethtool.h>
-+#include <linux/if_ether.h>
-+#include <net/dsa.h>
-+#include <linux/ata_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+#include <asm/mach-types.h>
-+#include <asm/gpio.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/pci.h>
-+#include "orion5x.h"
-+#include "common.h"
-+#include "mpp.h"
-+
-+/*****************************************************************************
-+ * DT2 local
-+ ****************************************************************************/
-+#include <asm/setup.h>
-+#include "dt2-common.h"
-+
-+u32 mvUbootVer = 0;
-+u32 mvTclk = 166666667;
-+u32 mvSysclk = 200000000;
-+u32 mvIsUsbHost = 1;
-+u32 overEthAddr = 0;
-+u32 gBoardId = -1;
-+struct DT2_EEPROM_STRUCT dt2_eeprom;
-+
-+/*****************************************************************************
-+ * DT2 Info
-+ ****************************************************************************/
-+/*
-+ * PCI
-+ */
-+
-+#define DT2_PCI_SLOT0_OFFS	7
-+#define DT2_PCI_SLOT0_IRQ_A_PIN	3
-+#define DT2_PCI_SLOT0_IRQ_B_PIN	2
-+
-+#define DT2_PIN_GPIO_SYNC	25
-+#define DT2_PIN_GPIO_POWER	24
-+#define DT2_PIN_GPIO_UNPLUG1	23
-+#define DT2_PIN_GPIO_UNPLUG2	22
-+#define DT2_PIN_GPIO_RESET	4
-+
-+#define DT2_NOR_BOOT_BASE	0xf4000000
-+#define DT2_NOR_BOOT_SIZE	SZ_512K
-+
-+#define DT2_LEDS_BASE		0xfa000000
-+#define DT2_LEDS_SIZE		SZ_1K
-+
-+/*****************************************************************************
-+ * 512K NOR Flash on Device bus Boot CS
-+ ****************************************************************************/
-+
-+static struct mtd_partition dt2_partitions[] = {
-+	{
-+		.name	= "u-boot",
-+		.size	= 0x00080000,
-+		.offset	= 0,
-+	},
-+};
-+
-+static struct physmap_flash_data dt2_nor_flash_data = {
-+	.width		= 1,		/* 8 bit bus width */
-+	.parts		= dt2_partitions,
-+	.nr_parts	= ARRAY_SIZE(dt2_partitions)
-+};
-+
-+static struct resource dt2_nor_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= DT2_NOR_BOOT_BASE,
-+	.end		= DT2_NOR_BOOT_BASE + DT2_NOR_BOOT_SIZE - 1,
-+};
-+
-+static struct platform_device dt2_nor_flash = {
-+	.name		= "physmap-flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &dt2_nor_flash_data,
-+	},
-+	.resource	= &dt2_nor_flash_resource,
-+	.num_resources	= 1,
-+};
-+
-+/*****************************************************************************
-+ * PCI
-+ ****************************************************************************/
-+
-+void __init dt2_pci_preinit(void)
-+{
-+	int pin, irq;
-+
-+	/*
-+	 * Configure PCI GPIO IRQ pins
-+	 */
-+	pin = DT2_PCI_SLOT0_IRQ_A_PIN;
-+	if (gpio_request(pin, "PCI IntA") == 0) {
-+		if (gpio_direction_input(pin) == 0) {
-+			irq = gpio_to_irq(pin);
-+			irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
-+			printk (KERN_INFO "PCI IntA IRQ: %d\n", irq);
-+		} else {
-+			printk(KERN_ERR "dt2_pci_preinit failed to "
-+					"irq_set_irq_type pin %d\n", pin);
-+			gpio_free(pin);
-+		}
-+	} else {
-+		printk(KERN_ERR "dt2_pci_preinit failed to request gpio %d\n", pin);
-+	}
-+
-+	pin = DT2_PCI_SLOT0_IRQ_B_PIN;
-+	if (gpio_request(pin, "PCI IntB") == 0) {
-+		if (gpio_direction_input(pin) == 0) {
-+			irq = gpio_to_irq(pin);
-+			irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
-+			printk (KERN_INFO "PCI IntB IRQ: %d\n", irq);
-+		} else {
-+			printk(KERN_ERR "dt2_pci_preinit failed to "
-+					"irq_set_irq_type pin %d\n", pin);
-+			gpio_free(pin);
-+		}
-+	} else {
-+		printk(KERN_ERR "dt2_pci_preinit failed to gpio_request %d\n", pin);
-+	}
-+}
-+
-+static int __init dt2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	int irq;
-+
-+	/*
-+	 * Check for devices with hard-wired IRQs.
-+	 */
-+	irq = orion5x_pci_map_irq(dev, slot, pin);
-+	if (irq != -1){
-+		printk(KERN_INFO "orion5x_pci_map_irq: %d\n", irq);
-+		return irq;
-+	}
-+
-+	/*
-+	 * PCI IRQs are connected via GPIOs
-+	 */
-+	switch (slot - DT2_PCI_SLOT0_OFFS) {
-+	case 0:
-+		if (pin == 1){
-+			irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_A_PIN);
-+			printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_A_PIN: %d\n", irq);
-+		}
-+		else {
-+			irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_B_PIN);
-+			printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_B_PIN: %d\n", irq);
-+		}
-+	default:
-+		irq = -1;
-+			printk(KERN_INFO "dt2_pci_map_irq IRQ: %d\n", irq);
-+	}
-+
-+	return irq;
-+}
-+
-+static struct hw_pci dt2_pci __initdata = {
-+	.nr_controllers	= 2,
-+	.preinit	= dt2_pci_preinit,
-+	.setup		= orion5x_pci_sys_setup,
-+	.scan		= orion5x_pci_sys_scan_bus,
-+	.map_irq	= dt2_pci_map_irq,
-+};
-+
-+static int __init dt2_pci_init(void)
-+{
-+	if (machine_is_dt2())
-+		pci_common_init(&dt2_pci);
-+
-+	return 0;
-+}
-+
-+subsys_initcall(dt2_pci_init);
-+
-+/*****************************************************************************
-+ * Ethernet
-+ ****************************************************************************/
-+
-+static struct mv643xx_eth_platform_data dt2_eth_data = {
-+	.phy_addr	= MV643XX_ETH_PHY_NONE,
-+	.speed		= SPEED_1000,
-+	.duplex		= DUPLEX_FULL,
-+};
-+
-+static struct dsa_chip_data dt2_switch_chip_data = {
-+	.port_names[0] = "wan",
-+	.port_names[1] = "lan1",
-+	.port_names[2] = "lan2",
-+	.port_names[3] = "cpu",
-+	.port_names[4] = "lan3",
-+	.port_names[5] = "lan4",
-+};
-+
-+static struct dsa_platform_data dt2_switch_plat_data = {
-+	.nr_chips	= 1,
-+	.chip		= &dt2_switch_chip_data,
-+};
-+
-+/*****************************************************************************
-+ * RTC ISL1208 on I2C bus
-+ ****************************************************************************/
-+static struct i2c_board_info __initdata dt2_i2c_rtc = {
-+	I2C_BOARD_INFO("isl1208", 0x6F),
-+};
-+
-+/*****************************************************************************
-+ * Sata
-+ ****************************************************************************/
-+static struct mv_sata_platform_data dt2_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+/*****************************************************************************
-+ * General Setup
-+ ****************************************************************************/
-+static unsigned int dt2_mpp_modes[] __initdata = {
-+	MPP0_GPIO,		// RTC interrupt
-+	MPP1_GPIO,		// 88e6131 interrupt
-+	MPP2_GPIO,		// PCI_intB
-+	MPP3_GPIO,		// PCI_intA
-+	MPP4_GPIO,		// reset button switch
-+	MPP5_GPIO,
-+	MPP6_GPIO,
-+	MPP7_GPIO,
-+	MPP8_GPIO,
-+	MPP9_GIGE,		/* GE_RXERR */
-+	MPP10_GPIO,		// usb
-+	MPP11_GPIO,		// usb
-+	MPP12_GIGE,		// GE_TXD[4]
-+	MPP13_GIGE,		// GE_TXD[5]
-+	MPP14_GIGE,		// GE_TXD[6]
-+	MPP15_GIGE,		// GE_TXD[7]
-+	MPP16_GIGE,		// GE_RXD[4]
-+	MPP17_GIGE,		// GE_RXD[5]
-+	MPP18_GIGE,		// GE_RXD[6]
-+	MPP19_GIGE,		// GE_RXD[7]
-+	0,
-+};
-+
-+/*****************************************************************************
-+ * LEDS
-+ ****************************************************************************/
-+static struct platform_device dt2_leds = {
-+	.name		= "dt2-led",
-+	.id		= -1,
-+};
-+
-+/****************************************************************************
-+ * GPIO key
-+ ****************************************************************************/
-+static irqreturn_t dt2_reset_handler(int irq, void *dev_id)
-+{
-+	/* This is the paper-clip reset which does an emergency reboot. */
-+	printk(KERN_INFO "Restarting system.\n");
-+	machine_restart(NULL);
-+
-+	/* This should never be reached. */
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t dt2_power_handler(int irq, void *dev_id)
-+{
-+	printk(KERN_INFO "Shutting down system.\n");
-+	machine_power_off();
-+	return IRQ_HANDLED;
-+}
-+
-+static void __init dt2_init(void)
-+{
-+	/*
-+	 * Setup basic Orion functions. Need to be called early.
-+	 */
-+	orion5x_init();
-+
-+	orion5x_mpp_conf(dt2_mpp_modes);
-+
-+	/*
-+	 * Configure peripherals.
-+	 */
-+
-+	orion5x_uart0_init();
-+	orion5x_ehci0_init();
-+	orion5x_ehci1_init();
-+	orion5x_i2c_init();
-+	orion5x_sata_init(&dt2_sata_data);
-+	orion5x_xor_init();
-+
-+	printk(KERN_INFO "U-Boot parameters:\n");
-+	printk(KERN_INFO "Sys Clk = %d, Tclk = %d, BoardID = 0x%02x\n", mvSysclk, mvTclk, gBoardId);
-+
-+	printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number);
-+	printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision);
-+	printk(KERN_INFO "DT2: Using MAC address %pM for port 0\n",
-+	       dt2_eeprom.gw.mac_addr[0]);
-+	printk(KERN_INFO "DT2: Using MAC address %pM for port 1\n",
-+	       dt2_eeprom.gw.mac_addr[1]);
-+
-+	orion5x_eth_init(&dt2_eth_data);
-+	memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6);
-+	orion5x_eth_switch_init(&dt2_switch_plat_data);
-+
-+	i2c_register_board_info(0, &dt2_i2c_rtc, 1);
-+
-+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-+				    DT2_NOR_BOOT_BASE, DT2_NOR_BOOT_SIZE);
-+
-+	platform_device_register(&dt2_nor_flash);
-+
-+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
-+				    ORION_MBUS_DEVBUS_ATTR(0),
-+				    DT2_LEDS_BASE, DT2_LEDS_SIZE);
-+	platform_device_register(&dt2_leds);
-+
-+	if (request_irq(gpio_to_irq(DT2_PIN_GPIO_RESET), &dt2_reset_handler,
-+			IRQF_TRIGGER_LOW,
-+			"DT2: Reset button", NULL) < 0) {
-+
-+		printk("DT2: Reset Button IRQ %d not available\n",
-+			gpio_to_irq(DT2_PIN_GPIO_RESET));
-+	}
-+
-+	if (request_irq(gpio_to_irq(DT2_PIN_GPIO_POWER), &dt2_power_handler,
-+			IRQF_TRIGGER_LOW,
-+			"DT2: Power button", NULL) < 0) {
-+
-+		printk(KERN_DEBUG "DT2: Power Button IRQ %d not available\n",
-+			gpio_to_irq(DT2_PIN_GPIO_POWER));
-+	}
-+}
-+
-+static int __init parse_tag_dt2_uboot(const struct tag *t)
-+{
-+	struct tag_mv_uboot *mv_uboot;
-+
-+	// Get pointer to our block
-+	mv_uboot = (struct tag_mv_uboot*)&t->u;
-+	mvTclk = mv_uboot->tclk;
-+	mvSysclk = mv_uboot->sysclk;
-+	mvUbootVer = mv_uboot->uboot_version;
-+	mvIsUsbHost = mv_uboot->isUsbHost;
-+
-+	// Some clock fixups
-+	if(mvTclk == 166000000) mvTclk = 166666667;
-+	else if(mvTclk == 133000000) mvTclk = 133333333;
-+	else if(mvSysclk == 166000000) mvSysclk = 166666667;
-+
-+	gBoardId =  (mvUbootVer & 0xff);
-+
-+	//DT2 specific data
-+	memcpy(&dt2_eeprom, mv_uboot->dt2_eeprom, sizeof(struct DT2_EEPROM_STRUCT));
-+
-+	return 0;
-+}
-+__tagtable(ATAG_MV_UBOOT, parse_tag_dt2_uboot);
-+
-+/*
-+ * This is OpenWrt specific fixup. It includes code from original "tag_fixup_mem32" to
-+ * fixup bogus memory tags and also fixes kernel cmdline by adding " init=/etc/preinit"
-+ * at the end. It is important to flash OpenWrt image from original Freecom firmware.
-+ *
-+ * Vanilla kernel should use "tag_fixup_mem32" function.
-+ */
-+static void __init openwrt_fixup(struct tag *t, char **from)
-+{
-+	char *p = NULL;
-+	static char openwrt_init_tag[] __initdata = " init=/etc/preinit";
-+
-+	for (; t->hdr.size; t = tag_next(t)){
-+		/* Locate the Freecom cmdline */
-+		if (t->hdr.tag == ATAG_CMDLINE) {
-+			p = t->u.cmdline.cmdline;
-+			printk("%s(%d): Found cmdline '%s' at 0x%0lx\n",
-+			       __FUNCTION__, __LINE__, p, (unsigned long)p);
-+		}
-+		/*
-+		 * Many orion-based systems have buggy bootloader implementations.
-+		 * This is a common fixup for bogus memory tags.
-+		 */
-+		if (t->hdr.tag == ATAG_MEM &&
-+		    (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
-+		     t->u.mem.start & ~PAGE_MASK)) {
-+			printk(KERN_WARNING
-+			       "Clearing invalid memory bank %dKB@0x%08x\n",
-+			       t->u.mem.size / 1024, t->u.mem.start);
-+			t->hdr.tag = 0;
-+		}
-+	}
-+
-+	printk("%s(%d): End of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t);
-+
-+	/* Overwrite the end of the table with a new cmdline tag. */
-+	t->hdr.tag = ATAG_CMDLINE;
-+	t->hdr.size =
-+		(sizeof (struct tag_header) +
-+		 strlen(p) + strlen(openwrt_init_tag) + 1 + 4) >> 2;
-+
-+	strlcpy(t->u.cmdline.cmdline, p, COMMAND_LINE_SIZE);
-+	strlcpy(t->u.cmdline.cmdline + strlen(p), openwrt_init_tag,
-+		COMMAND_LINE_SIZE - strlen(p));
-+
-+	printk("%s(%d): New cmdline '%s' at 0x%0lx\n",
-+	       __FUNCTION__, __LINE__,
-+	       t->u.cmdline.cmdline, (unsigned long)t->u.cmdline.cmdline);
-+
-+	t = tag_next(t);
-+
-+	printk("%s(%d): New end of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t);
-+
-+	t->hdr.tag = ATAG_NONE;
-+	t->hdr.size = 0;
-+}
-+
-+/* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */
-+MACHINE_START(DT2, "Freecom DataTank Gateway")
-+	/* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */
-+	.atag_offset    = 0x100,
-+	.init_machine	= dt2_init,
-+	.map_io		= orion5x_map_io,
-+	.init_irq	= orion5x_init_irq,
-+	.init_time	= orion5x_timer_init,
-+	.fixup		= openwrt_fixup, //tag_fixup_mem32,
-+MACHINE_END
diff --git a/target/linux/orion/patches-4.9/210-wn802t_support.patch b/target/linux/orion/patches-4.9/210-wn802t_support.patch
deleted file mode 100644
index a274beedc3..0000000000
--- a/target/linux/orion/patches-4.9/210-wn802t_support.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- a/arch/arm/mach-orion5x/Kconfig
-+++ b/arch/arm/mach-orion5x/Kconfig
-@@ -159,10 +159,13 @@ config MACH_MSS2_DT
- 	  Maxtor Shared Storage II platform.
- 
- config MACH_WNR854T
--	bool "Netgear WNR854T"
-+	bool "Netgear WNR854T / WN802T"
- 	help
- 	  Say 'Y' here if you want your kernel to support the
--	  Netgear WNR854T platform.
-+	  Netgear WNR854T or WN802T platform.
-+
-+config MACH_WN802T
-+	def_bool MACH_WNR854T
- 
- config MACH_RD88F5181L_GE
- 	bool "Marvell Orion-VoIP GE Reference Design"
---- a/arch/arm/mach-orion5x/wnr854t-setup.c
-+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
-@@ -115,6 +115,15 @@ static struct dsa_platform_data __initda
- 	.chip		= &wnr854t_switch_chip_data,
- };
- 
-+static struct dsa_chip_data wn802t_switch_chip_data = {
-+	.port_names[2] = "wan",
-+	.port_names[3] = "cpu",
-+};
-+
-+static struct dsa_platform_data wn802t_switch_plat_data = {
-+	.nr_chips	= 1,
-+	.chip		= &wn802t_switch_chip_data,
-+};
- static void __init wnr854t_init(void)
- {
- 	/*
-@@ -128,7 +137,10 @@ static void __init wnr854t_init(void)
- 	 * Configure peripherals.
- 	 */
- 	orion5x_eth_init(&wnr854t_eth_data);
--	orion5x_eth_switch_init(&wnr854t_switch_plat_data);
-+	if (machine_is_wn802t())
-+		orion5x_eth_switch_init(&wn802t_switch_plat_data);
-+	else
-+		orion5x_eth_switch_init(&wnr854t_switch_plat_data);
- 	orion5x_uart0_init();
- 
- 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-@@ -168,7 +180,7 @@ static struct hw_pci wnr854t_pci __initd
- 
- static int __init wnr854t_pci_init(void)
- {
--	if (machine_is_wnr854t())
-+	if (machine_is_wnr854t() || machine_is_wn802t())
- 		pci_common_init(&wnr854t_pci);
- 
- 	return 0;
-@@ -187,3 +199,15 @@ MACHINE_START(WNR854T, "Netgear WNR854T"
- 	.fixup		= tag_fixup_mem32,
- 	.restart	= orion5x_restart,
- MACHINE_END
-+
-+MACHINE_START(WN802T, "Netgear WN802T")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.atag_offset	= 0x100,
-+	.init_machine	= wnr854t_init,
-+	.map_io		= orion5x_map_io,
-+	.init_early	= orion5x_init_early,
-+	.init_irq	= orion5x_init_irq,
-+	.init_time	= orion5x_timer_init,
-+	.fixup		= tag_fixup_mem32,
-+	.restart	= orion5x_restart,
-+MACHINE_END
diff --git a/target/linux/sunxi/Makefile b/target/linux/sunxi/Makefile
index aae7df1b44..8d09d4e939 100644
--- a/target/linux/sunxi/Makefile
+++ b/target/linux/sunxi/Makefile
@@ -15,7 +15,6 @@ SUBTARGETS:=cortexa8 cortexa7 cortexa53
 MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER := 4.19
 KERNELNAME:=zImage dtbs
 
 # A10: Cortex-A8
diff --git a/target/linux/sunxi/patches-4.19/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch b/target/linux/sunxi/patches-4.19/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch
deleted file mode 100644
index ef7867af81..0000000000
--- a/target/linux/sunxi/patches-4.19/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 55ec26d6a4241363fa94f15377ebd8f1116fbfd7 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 12 Jan 2019 20:17:19 -0600
-Subject: [PATCH] arm64: dts: allwinner: a64: Enable A64 timer workaround
-
-As instability in the architectural timer has been observed on multiple
-devices using this SoC, inluding the Pine64 and the Orange Pi Win,
-enable the workaround in the SoC's device tree.
-
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -159,6 +159,7 @@
- 
- 	timer {
- 		compatible = "arm,armv8-timer";
-+		allwinner,erratum-unknown1;
- 		interrupts = <GIC_PPI 13
- 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- 			     <GIC_PPI 14
diff --git a/target/linux/sunxi/patches-4.19/301-orangepi_pc2_usb_otg_to_host_key_power.patch b/target/linux/sunxi/patches-4.19/301-orangepi_pc2_usb_otg_to_host_key_power.patch
deleted file mode 100644
index af243ca3e7..0000000000
--- a/target/linux/sunxi/patches-4.19/301-orangepi_pc2_usb_otg_to_host_key_power.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-@@ -98,7 +98,7 @@
- 
- 		sw4 {
- 			label = "sw4";
--			linux,code = <BTN_0>;
-+			linux,code = <KEY_POWER>;
- 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-@@ -238,7 +238,7 @@
- };
- 
- &usb_otg {
--	dr_mode = "otg";
-+	dr_mode = "host";
- 	status = "okay";
- };
- 
diff --git a/target/linux/sunxi/patches-4.19/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch b/target/linux/sunxi/patches-4.19/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch
deleted file mode 100644
index 1d58b7bcba..0000000000
--- a/target/linux/sunxi/patches-4.19/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 49cd9ea6dc8d68eb519ccd9f31c9730dec8a181a Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 8 Mar 2018 22:14:50 +0100
-Subject: [PATCH] Revert "ARM: dts: sun7i: Add BCM53125 switch nodes to the
- lamobo-r1 board"
-
-This reverts the changes needed for the upstream b53 DSA switch driver 
-to use the OpenWrt b43 swconfig switch driver.
-
-This reverts commit 0cdefd5b5485ee6eb3512a75739d09a4090176ed.
-This reverts commit d7b9eaff5f0ca00726336b4c0c3c29decf30412a.
----
- arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 ++-----------------------------
- 1 file changed, 3 insertions(+), 57 deletions(-)
-
---- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-@@ -124,67 +124,13 @@
- &gmac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_pins_rgmii_a>;
-+	phy = <&phy1>;
- 	phy-mode = "rgmii";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
--	fixed-link {
--		speed = <1000>;
--		full-duplex;
--	};
--
--	mdio {
--		compatible = "snps,dwmac-mdio";
--		#address-cells = <1>;
--		#size-cells = <0>;
--
--		switch: ethernet-switch@1e {
--			compatible = "brcm,bcm53125";
--			reg = <30>;
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			ports {
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				port0: port@0 {
--					reg = <0>;
--					label = "lan2";
--				};
--
--				port1: port@1 {
--					reg = <1>;
--					label = "lan3";
--				};
--
--				port2: port@2 {
--					reg = <2>;
--					label = "lan4";
--				};
--
--				port3: port@3 {
--					reg = <3>;
--					label = "wan";
--				};
--
--				port4: port@4 {
--					reg = <4>;
--					label = "lan1";
--				};
--
--				port8: port@8 {
--					reg = <8>;
--					label = "cpu";
--					ethernet = <&gmac>;
--					phy-mode = "rgmii-txid";
--					fixed-link {
--						speed = <1000>;
--						full-duplex;
--					};
--				};
--			};
--		};
-+	phy1: ethernet-phy@1 {
-+		reg = <1>;
- 	};
- };
- 
diff --git a/target/linux/sunxi/patches-4.19/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch b/target/linux/sunxi/patches-4.19/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
deleted file mode 100644
index ee70abee27..0000000000
--- a/target/linux/sunxi/patches-4.19/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001
-From: Oskari Lemmela <oskari@lemmela.net>
-Date: Mon, 31 Dec 2018 07:44:49 +0200
-Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions.
-
-First 896kB to u-boot. Enough space for SPL, u-boot and ATF.
-Next 128kB to u-boot environment and rest to firmware.
-
-Firmware partition is compatible FIT image dynamic splitting.
-
-Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
----
- .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-@@ -78,6 +78,28 @@
- 		compatible = "jedec,spi-nor";
- 		reg = <0>;
- 		spi-max-frequency = <40000000>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "u-boot";
-+				reg = <0x000000 0x0E0000>;
-+			};
-+
-+			partition@e0000 {
-+				label = "u-boot-env";
-+				reg = <0x0E0000 0x020000>;
-+			};
-+
-+			partition@100000 {
-+				compatible = "denx,fit";
-+				label = "firmware";
-+				reg = <0x100000 0xF00000>;
-+			};
-+		};
- 	};
- };
- 
diff --git a/target/linux/tegra/Makefile b/target/linux/tegra/Makefile
index 8a611e29ab..57cb902cfd 100644
--- a/target/linux/tegra/Makefile
+++ b/target/linux/tegra/Makefile
@@ -15,7 +15,6 @@ CPU_SUBTYPE := vfpv3
 MAINTAINER := Tomasz Maciej Nowak <tomek_n@o2.pl>
 
 KERNEL_PATCHVER := 4.14
-KERNEL_TESTING_PATCHVER := 4.19
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/tegra/patches-4.19/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch b/target/linux/tegra/patches-4.19/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
deleted file mode 100644
index 9e8c331934..0000000000
--- a/target/linux/tegra/patches-4.19/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From patchwork Fri Jul 13 11:32:42 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: serial8250 on tegra hsuart: recover from spurious interrupts due to
- tegra2 silicon bug
-X-Patchwork-Submitter: "David R. Piegdon" <lkml@p23q.org>
-X-Patchwork-Id: 943440
-Message-Id: <4676ea34-69ce-5422-1ded-94218b89f7d9@p23q.org>
-To: linux-tegra@vger.kernel.org
-Date: Fri, 13 Jul 2018 11:32:42 +0000
-From: "David R. Piegdon" <lkml@p23q.org>
-List-Id: <linux-tegra.vger.kernel.org>
-
-Hi,
-a while back I sent a few mails regarding spurious interrupts in the
-UARTA (hsuart) block of the Tegra2 SoC, when using the 8250 driver for
-it instead of the hsuart driver. After going down a pretty deep
-debugging/testing hole, I think I found a patch that fixes the issue. So
-far testing in a reboot-cycle suggests that the error frequency dropped
-from >3% of all reboots to at least <0.05% of all reboots. Tests
-continue to run over the weekend.
-
-The patch below already is a second iteration; the first did not reset
-the MCR or contain the lines below '// clear interrupts'. This resulted
-in no more spurious interrupts, but in a few % of spurious interrupts
-that were recovered the UART block did not receive any characters any
-more. So further resetting was required to fully reacquire operational
-state of the UART block.
-
-I'd love any comments/suggestions on this!
-
-Cheers,
-
-David
-
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -136,6 +136,38 @@ static irqreturn_t serial8250_interrupt(
- 				"serial8250: too much work for irq%d\n", irq);
- 			break;
- 		}
-+
-+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-+		if (!handled && (port->type == PORT_TEGRA)) {
-+			/*
-+			 * Fix Tegra 2 CPU silicon bug where sometimes
-+			 * "TX holding register empty" interrupts result in a
-+			 * bad (metastable?) state in Tegras HSUART IP core.
-+			 * Only way to recover seems to be to reset all
-+			 * interrupts as well as the TX queue and the MCR.
-+			 * But we don't want to loose any outgoing characters,
-+			 * so only do it if the RX and TX queues are empty.
-+			 */
-+			unsigned char lsr = port->serial_in(port, UART_LSR);
-+			const unsigned char fifo_empty_mask =
-+						(UART_LSR_TEMT | UART_LSR_THRE);
-+			if (((lsr & (UART_LSR_DR | fifo_empty_mask)) ==
-+							fifo_empty_mask)) {
-+				port->serial_out(port, UART_IER, 0);
-+				port->serial_out(port, UART_MCR, 0);
-+				serial8250_clear_and_reinit_fifos(up);
-+				port->serial_out(port, UART_MCR, up->mcr);
-+				port->serial_out(port, UART_IER, up->ier);
-+				// clear interrupts
-+				serial_port_in(port, UART_LSR);
-+				serial_port_in(port, UART_RX);
-+				serial_port_in(port, UART_IIR);
-+				serial_port_in(port, UART_MSR);
-+				up->lsr_saved_flags = 0;
-+				up->msr_saved_flags = 0;
-+			}
-+		}
-+#endif
- 	} while (l != end);
- 
- 	spin_unlock(&i->lock);
diff --git a/target/linux/tegra/patches-4.19/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch b/target/linux/tegra/patches-4.19/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
deleted file mode 100644
index ae48e8d862..0000000000
--- a/target/linux/tegra/patches-4.19/101-ARM-dtc-tegra-enable-front-panel-leds-in-TrimSlice.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/boot/dts/tegra20-trimslice.dts
-+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
-@@ -200,16 +200,17 @@
- 			conf_ata {
- 				nvidia,pins = "ata", "atc", "atd", "ate",
- 					"crtp", "dap2", "dap3", "dap4", "dta",
--					"dtb", "dtc", "dtd", "dte", "gmb",
--					"gme", "i2cp", "pta", "slxc", "slxd",
--					"spdi", "spdo", "uda";
-+					"dtb", "dtc", "dtd", "gmb", "gme",
-+					"i2cp", "pta", "slxc", "slxd", "spdi",
-+					"spdo", "uda";
- 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
- 			};
- 			conf_atb {
- 				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
--					"gma", "gmc", "gmd", "gpu", "gpu7",
--					"gpv", "sdio1", "slxa", "slxk", "uac";
-+					"dte", "gma", "gmc", "gmd", "gpu",
-+					"gpu7", "gpv", "sdio1", "slxa", "slxk",
-+					"uac";
- 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
- 			};
-@@ -402,6 +403,20 @@
- 		};
- 	};
- 
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		ds2 {
-+			label = "trimslice:green:right";
-+			gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
-+		};
-+
-+		ds3 {
-+			label = "trimslice:green:left";
-+			gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
- 	poweroff {
- 		compatible = "gpio-poweroff";
- 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
diff --git a/target/linux/x86/Makefile b/target/linux/x86/Makefile
index 509ccb47a2..533c0e5248 100644
--- a/target/linux/x86/Makefile
+++ b/target/linux/x86/Makefile
@@ -14,7 +14,6 @@ SUBTARGETS:=generic legacy geode 64
 MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER:=4.19
 
 KERNELNAME:=bzImage
 
diff --git a/target/linux/x86/patches-4.19/011-tune_lzma_options.patch b/target/linux/x86/patches-4.19/011-tune_lzma_options.patch
deleted file mode 100644
index e680f9c484..0000000000
--- a/target/linux/x86/patches-4.19/011-tune_lzma_options.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -324,7 +324,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
- 
- quiet_cmd_lzma = LZMA    $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
--	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+	lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- 	(rm -f $@ ; false)
- 
- quiet_cmd_lzo = LZO     $@
---- a/arch/x86/include/asm/boot.h
-+++ b/arch/x86/include/asm/boot.h
-@@ -24,7 +24,7 @@
- # error "Invalid value for CONFIG_PHYSICAL_ALIGN"
- #endif
- 
--#ifdef CONFIG_KERNEL_BZIP2
-+#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA)
- # define BOOT_HEAP_SIZE		0x400000
- #else /* !CONFIG_KERNEL_BZIP2 */
- # define BOOT_HEAP_SIZE		 0x10000
diff --git a/target/linux/x86/patches-4.19/100-fix_cs5535_clockevt.patch b/target/linux/x86/patches-4.19/100-fix_cs5535_clockevt.patch
deleted file mode 100644
index c3a7fce9ce..0000000000
--- a/target/linux/x86/patches-4.19/100-fix_cs5535_clockevt.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/clocksource/cs5535-clockevt.c
-+++ b/drivers/clocksource/cs5535-clockevt.c
-@@ -130,7 +130,8 @@ static irqreturn_t mfgpt_tick(int irq, v
- 		cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP,
- 				MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
- 
--	cs5535_clockevent.event_handler(&cs5535_clockevent);
-+	if (cs5535_clockevent.event_handler)
-+		cs5535_clockevent.event_handler(&cs5535_clockevent);
- 	return IRQ_HANDLED;
- }
- 
diff --git a/target/linux/x86/patches-4.19/200-pcengines-apu2-reboot.patch b/target/linux/x86/patches-4.19/200-pcengines-apu2-reboot.patch
deleted file mode 100644
index 1426140183..0000000000
--- a/target/linux/x86/patches-4.19/200-pcengines-apu2-reboot.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/x86/kernel/reboot.c
-+++ b/arch/x86/kernel/reboot.c
-@@ -469,6 +469,16 @@ static const struct dmi_system_id reboot
- 		},
- 	},
- 
-+	/* PC Engines */
-+	{	/* Handle problems with rebooting on PC Engines apu2 */
-+		.callback = set_pci_reboot,
-+		.ident = "PC Engines apu2",
-+		.matches = {
-+			DMI_MATCH(DMI_BOARD_VENDOR, "PC Engines"),
-+			DMI_MATCH(DMI_BOARD_NAME, "apu2"),
-+		},
-+	},
-+
- 	/* Sony */
- 	{	/* Handle problems with rebooting on Sony VGN-Z540N */
- 		.callback = set_bios_reboot,
diff --git a/target/linux/x86/patches-4.19/800-hwmon-w83627ehf-dont-claim-nct677x.patch b/target/linux/x86/patches-4.19/800-hwmon-w83627ehf-dont-claim-nct677x.patch
deleted file mode 100644
index ef2e1333e7..0000000000
--- a/target/linux/x86/patches-4.19/800-hwmon-w83627ehf-dont-claim-nct677x.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/drivers/hwmon/w83627ehf.c
-+++ b/drivers/hwmon/w83627ehf.c
-@@ -2717,8 +2717,8 @@ static int __init w83627ehf_find(int sio
- 	static const char sio_name_W83627UHG[] __initconst = "W83627UHG";
- 	static const char sio_name_W83667HG[] __initconst = "W83667HG";
- 	static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B";
--	static const char sio_name_NCT6775[] __initconst = "NCT6775F";
--	static const char sio_name_NCT6776[] __initconst = "NCT6776F";
-+/*	static const char sio_name_NCT6775[] __initconst = "NCT6775F";
-+	static const char sio_name_NCT6776[] __initconst = "NCT6776F"; */
- 
- 	u16 val;
- 	const char *sio_name;
-@@ -2762,14 +2762,14 @@ static int __init w83627ehf_find(int sio
- 		sio_data->kind = w83667hg_b;
- 		sio_name = sio_name_W83667HG_B;
- 		break;
--	case SIO_NCT6775_ID:
-+/*	case SIO_NCT6775_ID:
- 		sio_data->kind = nct6775;
- 		sio_name = sio_name_NCT6775;
- 		break;
- 	case SIO_NCT6776_ID:
- 		sio_data->kind = nct6776;
- 		sio_name = sio_name_NCT6776;
--		break;
-+		break; */
- 	default:
- 		if (val != 0xffff)
- 			pr_debug("unsupported chip ID: 0x%04x\n", val);