diff options
Diffstat (limited to 'target')
3 files changed, 90 insertions, 56 deletions
diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c b/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c index b9f7d0e9f9..622f5d2141 100644 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c +++ b/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c @@ -252,30 +252,40 @@ static struct platform_device vlynq_high = { * as xscale and, obviously, don't work... */ #if !defined(CONFIG_SERIAL_8250) + +static struct plat_serial8250_port uart0_data = +{ + .mapbase = AR7_REGS_UART0, + .irq = AR7_IRQ_UART0, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, +}; + +static struct plat_serial8250_port uart1_data = +{ + .mapbase = UR8_REGS_UART1, + .irq = AR7_IRQ_UART1, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, +}; + static struct plat_serial8250_port uart_data[] = { - { - .mapbase = AR7_REGS_UART0, - .irq = AR7_IRQ_UART0, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - }, - { - .mapbase = AR7_REGS_UART1, - .irq = AR7_IRQ_UART1, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - }, - { - .flags = 0, - }, + uart0_data, + uart1_data, + { .flags = 0 } +}; + +static struct plat_serial8250_port uart_data_single[] = { + uart0_data, + { .flags = 0 } }; static struct platform_device uart = { .id = 0, .name = "serial8250", - .dev.platform_data = uart_data, + .dev.platform_data = uart_data_single }; #endif @@ -317,7 +327,8 @@ static int __init ar7_register_devices(void) { int res; -#if defined(CONFIG_SERIAL_8250) +#ifdef CONFIG_SERIAL_8250 + static struct uart_port uart_port[2]; memset(uart_port, 0, sizeof(struct uart_port) * 2); @@ -334,24 +345,38 @@ static int __init ar7_register_devices(void) if (res) return res; - uart_port[1].type = PORT_AR7; - uart_port[1].line = 1; - uart_port[1].irq = AR7_IRQ_UART1; - uart_port[1].uartclk = ar7_bus_freq() / 2; - uart_port[1].iotype = UPIO_MEM; - uart_port[1].mapbase = AR7_REGS_UART1; - uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); - uart_port[1].regshift = 2; - res = early_serial_setup(&uart_port[1]); - if (res) - return res; -#else + + // Only TNETD73xx have a second serial port + if (ar7_has_second_uart()) { + uart_port[1].type = PORT_AR7; + uart_port[1].line = 1; + uart_port[1].irq = AR7_IRQ_UART1; + uart_port[1].uartclk = ar7_bus_freq() / 2; + uart_port[1].iotype = UPIO_MEM; + uart_port[1].mapbase = UR8_REGS_UART1; + uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); + uart_port[1].regshift = 2; + res = early_serial_setup(&uart_port[1]); + if (res) + return res; + } + +#else // !CONFIG_SERIAL_8250 + uart_data[0].uartclk = ar7_bus_freq() / 2; uart_data[1].uartclk = uart_data[0].uartclk; + + // Only TNETD73xx have a second serial port + if (ar7_has_second_uart()) { + uart.dev.platform_data = uart_data; + } + res = platform_device_register(&uart); if (res) return res; -#endif + +#endif // CONFIG_SERIAL_8250 + res = platform_device_register(&physmap_flash); if (res) return res; diff --git a/target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c b/target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c index 59ac693d43..50dfb5ef3c 100644 --- a/target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c +++ b/target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c @@ -73,10 +73,27 @@ static unsigned expect_close; /* XXX currently fixed, allows max margin ~68.72 secs */ #define prescale_value 0xFFFF +// Offset of the WDT registers +static unsigned long ar7_regs_wdt; +// Pointer to the remapped WDT IO space +static ar7_wdt_t *ar7_wdt; +static void ar7_wdt_get_regs(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) + { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + ar7_regs_wdt = AR7_REGS_WDT; + break; + default: + ar7_regs_wdt = UR8_REGS_WDT; + break; + } +} + static void ar7_wdt_kick(u32 value) { - volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)ioremap(AR7_REGS_WDT, sizeof(ar7_wdt_t)); - ar7_wdt->kick_lock = 0x5555; if ((ar7_wdt->kick_lock & 3) == 1) { ar7_wdt->kick_lock = 0xAAAA; @@ -90,8 +107,6 @@ static void ar7_wdt_kick(u32 value) static void ar7_wdt_prescale(u32 value) { - volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)ioremap(AR7_REGS_WDT, sizeof(ar7_wdt_t)); - ar7_wdt->prescale_lock = 0x5A5A; if ((ar7_wdt->prescale_lock & 3) == 1) { ar7_wdt->prescale_lock = 0xA5A5; @@ -105,8 +120,6 @@ static void ar7_wdt_prescale(u32 value) static void ar7_wdt_change(u32 value) { - volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)ioremap(AR7_REGS_WDT, sizeof(ar7_wdt_t)); - ar7_wdt->change_lock = 0x6666; if ((ar7_wdt->change_lock & 3) == 1) { ar7_wdt->change_lock = 0xBBBB; @@ -120,8 +133,6 @@ static void ar7_wdt_change(u32 value) static void ar7_wdt_disable(u32 value) { - volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)ioremap(AR7_REGS_WDT, sizeof(ar7_wdt_t)); - ar7_wdt->disable_lock = 0x7777; if ((ar7_wdt->disable_lock & 3) == 1) { ar7_wdt->disable_lock = 0xCCCC; @@ -285,12 +296,16 @@ static struct miscdevice ar7_wdt_miscdev = { static int __init ar7_wdt_init(void) { int rc; + + ar7_wdt_get_regs(); - if (!request_mem_region(AR7_REGS_WDT, sizeof(ar7_wdt_t), LONGNAME)) { + if (!request_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t), LONGNAME)) { printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n"); return -EBUSY; } + ar7_wdt = (ar7_wdt_t *)ioremap(ar7_regs_wdt, sizeof(ar7_wdt_t)); + ar7_wdt_disable_wdt(); ar7_wdt_prescale(prescale_value); ar7_wdt_update_margin(margin); @@ -313,7 +328,7 @@ static int __init ar7_wdt_init(void) out_register: misc_deregister(&ar7_wdt_miscdev); out_alloc: - release_mem_region(AR7_REGS_WDT, sizeof(ar7_wdt_t)); + release_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t)); out: return rc; } @@ -322,7 +337,8 @@ static void __exit ar7_wdt_cleanup(void) { unregister_reboot_notifier(&ar7_wdt_notifier); misc_deregister(&ar7_wdt_miscdev); - release_mem_region(AR7_REGS_WDT, sizeof(ar7_wdt_t)); + iounmap(ar7_wdt); + release_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t)); } module_init(ar7_wdt_init); diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h index 9a8348b5b7..49e66ff3af 100644 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h +++ b/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h @@ -28,27 +28,21 @@ #define AR7_REGS_BASE 0x08610000 #define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) -#define AR7_REGS_EMIF (AR7_REGS_BASE + 0x0800) #define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) -#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) -#define AR7_REGS_WDT (AR7_REGS_BASE + 0x0b00) -#define AR7_REGS_TIMER0 (AR7_REGS_BASE + 0x0c00) -#define AR7_REGS_TIMER1 (AR7_REGS_BASE + 0x0d00) +#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) // 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) #define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) -#define AR7_REGS_UART1 (AR7_REGS_BASE + 0x0f00) -#define AR7_REGS_I2C (AR7_REGS_BASE + 0x1000) -#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) -#define AR7_REGS_DMA (AR7_REGS_BASE + 0x1400) #define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) -#define AR7_REGS_BIST (AR7_REGS_BASE + 0x1700) #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1A00) #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1C00) #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1E00) -#define AR7_REGS_FSER (AR7_REGS_BASE + 0x2000) #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) #define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) +#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) +#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) +#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) + #define AR7_RESET_PEREPHERIAL 0x0 #define AR7_RESET_SOFTWARE 0x4 #define AR7_RESET_STATUS 0x8 @@ -64,8 +58,6 @@ #define AR7_GPIO_DIR 0x8 #define AR7_GPIO_ENABLE 0xC -#define AR7_GPIO_BIT_STATUS_LED 8 - #define AR7_CHIP_7100 0x18 #define AR7_CHIP_7200 0x2b #define AR7_CHIP_7300 0x05 @@ -131,6 +123,7 @@ static inline int ar7_has_high_cpmac(void) } } #define ar7_has_high_vlynq ar7_has_high_cpmac +#define ar7_has_second_uart ar7_has_high_cpmac static inline void ar7_device_enable(u32 bit) { |