diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/ath79/dts/qca9533_glinet_gl-x750.dts | 103 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca9533_glinet_x750.dtsi | 95 |
2 files changed, 97 insertions, 101 deletions
diff --git a/target/linux/ath79/dts/qca9533_glinet_gl-x750.dts b/target/linux/ath79/dts/qca9533_glinet_gl-x750.dts index 7313f96d51..14bad8aab6 100644 --- a/target/linux/ath79/dts/qca9533_glinet_gl-x750.dts +++ b/target/linux/ath79/dts/qca9533_glinet_gl-x750.dts @@ -4,7 +4,83 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include "qca9533_glinet_x750.dtsi" +#include "qca9533.dtsi" + +/ { + compatible = "glinet,gl-x750", "qca,qca9533"; + model = "GL.iNet GL-X750"; + + keys { + compatible = "gpio-keys-polled"; + + poll-interval = <20>; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + button0 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "gl-x750:green:power"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "gl-x750:green:wlan2g"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g { + label = "gl-x750:green:wlan5g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wan { + label = "gl-x750:green:wan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + 4g { + label = "gl-x750:green:4g"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; &spi { status = "okay"; @@ -31,16 +107,31 @@ reg = <0x040000 0x010000>; }; - art: partition@50000 { - label = "art"; - reg = <0x050000 0x010000>; - }; + art: partition@50000 { + label = "art"; + reg = <0x050000 0x010000>; + }; partition@60000 { label = "firmware"; reg = <0x060000 0xfa0000>; }; - }; }; }; + +ð0 { + status = "okay"; + mtd-mac-address = <&art 0x0>; + phy-handle = <&swphy4>; +}; + +ð1 { + mtd-mac-address = <&art 0x6>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x1002>; +}; diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dtsi b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi deleted file mode 100644 index e1f95d5f04..0000000000 --- a/target/linux/ath79/dts/qca9533_glinet_x750.dtsi +++ /dev/null @@ -1,95 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "qca9533.dtsi" - -/ { - compatible = "glinet,gl-x750", "qca,qca9533"; - model = "GL.iNet GL-X750"; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - pinctrl-names = "default"; - pinctrl-0 = <&jtag_disable_pins>; - - button0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - - }; - - leds { - compatible = "gpio-leds"; - - power { - label = "gl-x750:green:power"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - wlan2g { - label = "gl-x750:green:wlan2g"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wlan5g { - label = "gl-x750:green:wlan5g"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wan { - label = "gl-x750:green:wan"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - 4g { - label = "gl-x750:green:4g"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&usb0 { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - hub_port: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&usb_phy { - status = "okay"; -}; - -ð0 { - status = "okay"; - mtd-mac-address = <&art 0x0>; - phy-handle = <&swphy4>; -}; - -ð1 { - mtd-mac-address = <&art 0x6>; -}; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&art 0x1002>; -}; |