diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch | 92 |
1 files changed, 77 insertions, 15 deletions
diff --git a/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch index c91d0a99f4..230afd293c 100644 --- a/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch +++ b/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch @@ -5,10 +5,10 @@ Subject: [PATCH 32/69] phy: add qcom dwc3 phy Signed-off-by: Andy Gross <agross@codeaurora.org> --- - drivers/phy/Kconfig | 12 ++ + drivers/phy/Kconfig | 12 + drivers/phy/Makefile | 1 + - drivers/phy/phy-qcom-dwc3.c | 484 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 497 insertions(+) + drivers/phy/phy-qcom-dwc3.c | 546 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 559 insertions(+) create mode 100644 drivers/phy/phy-qcom-dwc3.c --- a/drivers/phy/Kconfig @@ -32,14 +32,14 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> endmenu --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile -@@ -60,3 +60,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy- +@@ -60,3 +60,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o +obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o --- /dev/null +++ b/drivers/phy/phy-qcom-dwc3.c -@@ -0,0 +1,484 @@ +@@ -0,0 +1,546 @@ +/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify @@ -108,6 +108,33 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> +#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane) +#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane) + ++/* SSPHY SoC version specific values */ ++#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */ ++#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit ++ preemphasis */ ++#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */ ++ ++/* QSCRATCH PHY_PARAM_CTRL1 fields */ ++#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u ++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u ++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u ++#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u ++ ++#define PHY_PARAM_CTRL1_MASK \ ++ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \ ++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \ ++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \ ++ PHY_PARAM_CTRL1_LOS_BIAS_MASK) ++ ++#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \ ++ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \ ++ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \ ++ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK) ++#define PHY_PARAM_CTRL1_LOS_BIAS(x) \ ++ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK) ++ +/* RX OVRD IN HI bits */ +#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13) +#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12) @@ -138,6 +165,9 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> + struct device *dev; + struct clk *xo_clk; + struct clk *ref_clk; ++ u32 rx_eq; ++ u32 tx_deamp_3_5db; ++ u32 mpll; +}; + +struct qcom_dwc3_phy_drvdata { @@ -354,7 +384,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> + * Fix RX Equalization setting as follows + * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0 + * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1 -+ * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version + * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1 + */ + ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, @@ -365,7 +395,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> + data &= ~RX_OVRD_IN_HI_RX_EQ_EN; + data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD; + data &= ~RX_OVRD_IN_HI_RX_EQ_MASK; -+ data |= 0x3 << RX_OVRD_IN_HI_RX_EQ_SHIFT; ++ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT; + data |= RX_OVRD_IN_HI_RX_EQ_OVRD; + ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, + SSPHY_CTRL_RX_OVRD_IN_HI(0), data); @@ -374,8 +404,8 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> + + /* + * Set EQ and TX launch amplitudes as follows -+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22 -+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127 ++ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version ++ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110 + * LANE0.TX_OVRD_DRV_LO.EN set to 1. + */ + ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, @@ -384,23 +414,35 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> + goto err_phy_trans; + + data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK; -+ data |= 0x16 << TX_OVRD_DRV_LO_PREEMPH_SHIFT; ++ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT; + data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK; -+ data |= 0x7f; ++ data |= 0x6E; + data |= TX_OVRD_DRV_LO_EN; + ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, + SSPHY_CTRL_TX_OVRD_DRV_LO(0), data); + if (ret) + goto err_phy_trans; + ++ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll); ++ + /* + * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows -+ * TX_FULL_SWING [26:20] amplitude to 127 -+ * TX_DEEMPH_3_5DB [13:8] to 22 -+ * LOS_BIAS [2:0] to 0x5 ++ * TX_FULL_SWING [26:20] amplitude to 110 ++ * TX_DEEMPH_6DB [19:14] to 32 ++ * TX_DEEMPH_3_5DB [13:8] set based on SoC version ++ * LOS_BIAS [7:3] to 9 + */ ++ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1); ++ ++ data &= ~PHY_PARAM_CTRL1_MASK; ++ ++ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) | ++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) | ++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) | ++ PHY_PARAM_CTRL1_LOS_BIAS(0x9); ++ + qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1, -+ 0x07f03f07, 0x07f01605); ++ PHY_PARAM_CTRL1_MASK, data); + +err_phy_trans: + return ret; @@ -461,6 +503,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> + struct resource *res; + const struct of_device_id *match; + const struct qcom_dwc3_phy_drvdata *data; ++ struct device_node *np; + + phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL); + if (!phy_dwc3) @@ -490,6 +533,25 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> + phy_dwc3->xo_clk = NULL; + } + ++ /* Parse device node to probe HSIO settings */ ++ np = of_node_get(pdev->dev.of_node); ++ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy", ++ strlen(match->compatible))) { ++ ++ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) || ++ of_property_read_u32(np, "tx_deamp_3_5db", ++ &phy_dwc3->tx_deamp_3_5db) || ++ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) { ++ ++ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n"); ++ ++ /* Default HSIO settings */ ++ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE; ++ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB; ++ phy_dwc3->mpll = SSPHY_MPLL_VALUE; ++ } ++ } ++ + generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, + &data->ops); + |